Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
#
# spec file for package util-linux-systemd
#
2015-01-15 15:35:14 +01:00
# Copyright (c) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany.
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
%bcond_without sysvinit_tools
%bcond_without enable_su
%bcond_without enable_eject
%bcond_with enable_last
Name : util-linux-systemd
%define _name util-linux
2014-09-04 16:05:56 +02:00
# WARNING: Never edit this file!!! Edit util-linux.spec and call pre_checkin.sh to update spec files:
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%define _name util-linux
# To prevent dependency loop in automatic build systems, we want to
# build util-linux in parts. To build all at once, set build_all to 1.
#
# build_util_linux: First stage build builds all except:
# build_util_linux_systemd: Builds util-linux-systemd and uuidd.
# build_python_libmount: Builds python-libmount.
%define build_all 0
2014-08-21 22:06:54 +02:00
# definitions for the main packages
# This two level indirect definition of Summary and Group is needed to
# simplify parsing of spec file by format_spec_file,
# source_validator and check-in QA scripts).
%define summary_ul A collection of basic system utilities
%define summary_uls A collection of basic system utilities
%define summary_pl Python bindings for the libmount library
%define group_ul System/Base
%define group_uls System/Base
%define group_pl System/Filesystems
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%if "%{name}" == "python-libmount"
%define build_util_linux 0
%define build_util_linux_systemd 0
%define build_python_libmount 1
# To prevent dependency loops, verify signature only in third stage.
%define verify_sig 1
2014-08-21 22:06:54 +02:00
%define main_summary %summary_pl
%define main_group %group_pl
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%else
%if "%{name}" == "util-linux-systemd"
%define build_util_linux 0
%define build_util_linux_systemd 1
%define build_python_libmount 0
%define verify_sig 0
2014-08-21 22:06:54 +02:00
%define main_summary %summary_uls
%define main_group %group_uls
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%else
2014-08-21 22:06:54 +02:00
%define main_summary %summary_ul
%define main_group %group_ul
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%if %build_all
%define build_util_linux 1
%define build_util_linux_systemd 1
%define build_python_libmount 1
%define verify_sig 1
%else
%define build_util_linux 1
%define build_util_linux_systemd 0
%define build_python_libmount 0
%define verify_sig 0
%endif
%endif
%endif
2014-08-21 22:06:54 +02:00
Summary : %main_summary
License : GPL-2.0+
Group : %main_group
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
BuildRequires : audit-devel
BuildRequires : bc
BuildRequires : binutils-devel
BuildRequires : fdupes
BuildRequires : gettext-devel
BuildRequires : libcap-ng-devel
BuildRequires : libselinux-devel
BuildRequires : libsepol-devel
BuildRequires : libtool
BuildRequires : ncurses-devel
BuildRequires : pam-devel
BuildRequires : pkg-config
BuildRequires : readline-devel
BuildRequires : utempter-devel
BuildRequires : zlib-devel
%if %verify_sig
BuildRequires : gpg-offline
%endif
%if %build_util_linux_systemd
%if 0%{?suse_version} <= 1230
BuildRequires : pkgconfig(systemd)
%else
BuildRequires : systemd-rpm-macros
BuildRequires : pkgconfig(libsystemd-daemon)
BuildRequires : pkgconfig(libsystemd-journal)
%endif
%endif
%if %build_python_libmount
BuildRequires : python-devel
%endif
#BEGIN SECOND STAGE DEPENDENCIES
%if !%build_util_linux
%if %build_util_linux_systemd
BuildRequires : libblkid-devel
BuildRequires : libmount-devel
BuildRequires : libsmartcols-devel
BuildRequires : libuuid-devel
%endif
%if %build_python_libmount
BuildRequires : libmount-devel
%endif
%endif
#END SECOND STAGE DEPENDENCIES
2014-09-05 12:56:25 +02:00
Version : 2.25.1
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
Release : 0
# util-linux is a base package and uuidd pre-requiring pwdutils pulls
# that into the core build cycle. pwdutils also pulls in the whole
# ldap stack into it. Avoid this whole mess which is done only to
# make the rpm install check of uuidd happy which has support to work without
# these tools as well
#!BuildIgnore: pwdutils
Url : https://www.kernel.org/pub/linux/utils/util-linux/
Source : ftp://ftp.kernel.org/pub/linux/utils/util-linux/v2.25/%{_name}-%{version} .tar.xz
Source1 : util-linux-rpmlintrc
Source4 : raw.init
Source5 : etc.raw
Source6 : etc_filesystems
Source7 : baselibs.conf
Source8 : login.pamd
Source9 : remote.pamd
Source10 : su.pamd
Source11 : su.default
Source12 : ftp://ftp.kernel.org/pub/linux/utils/util-linux/v2.25/%{_name}-%{version} .tar.sign
Source13 : %{_name}.keyring
2014-09-12 19:54:43 +02:00
Source14 : runuser.pamd
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
# TODO: split to separate package
Source40 : klogconsole.tar.bz2
# XXX: Run a program in a new session and with controlling tty
Source22 : setctsid.c
Source23 : setctsid.8
# XXX: ppc specific, still needed?
Source28 : mkzimage_cmdline.8
Source29 : mkzimage_cmdline.c
Source31 : addnote.c
#
Source51 : blkid.conf
##
## util-linux patches
##
# PATCH-EXTEND-UPSTREAM: Let `su' handle /sbin and /usr/sbin in path
Patch4 : make-sure-sbin-resp-usr-sbin-are-in-PATH.diff
# PATCH-FEATURE-SUSE -- Report about disabled encryption to stderr.
Patch12 : util-linux-noenc-suse.patch
##
## klogconsole
##
Patch55 : klogconsole-quiet.patch
Patch56 : klogconsole.diff
BuildRoot : %{_tmppath} /%{name} -%{version} -build
#
%if %build_util_linux
Supplements: filesystem(minix)
Provides : fsck-with-dev-lock = %{version}
# bnc#651598:
Provides : util-linux(fake+no-canonicalize)
PreReq : %install_info_prereq permissions
PreReq : %insserv_prereq %fillup_prereq /bin/sed
Recommends: %{name} -lang = %{version}
%if %{with enable_eject}
Provides : eject = 2.1.0-166.8
%endif
Provides : login = 4.0-33.7
%if %{with enable_eject}
# File conflict of eject (up to 12.3 and SLE11).
Obsoletes : eject < 2.1.0-166.8
%endif
# File conflict of login (up to 12.1 and SLE11).
Obsoletes : login < 4.0-33.7
%if %{with enable_su}
# File conflict of su and kill (up to 12.3 and SLE11).
# It should be coreutils < 8.21-4, but coreutils provide Release-less symbol.
Conflicts : coreutils < 8.21
%endif
%if %{with sysvinit_tools}
# File conflict of sulogin and utmpdump (up to 12.3 and SLE11).
Conflicts : sysvinit-tools < 2.88+-87
%endif
# bnc#805684:
%ifarch s390x
Obsoletes : s390-32
Provides : s390-32
%endif
# uuid-runtime appeared in SLE11 SP1 to SLE11 SP3
Provides : uuid-runtime = %{version} -%{release}
Obsoletes : uuid-runtime < %{version} -%{release}
#
# Using "Requires" here would lend itself to help upgrading, but since
# util-linux is in the initial bootstrap, that is not a good thing to do:
#
Recommends: adjtimex
Recommends: time
Recommends: which
%else
%if %build_python_libmount
%else
%if %build_util_linux_systemd
Supplements: packageand(util-linux:systemd)
# Split-provides for upgrade from SLE < 12 and openSUSE <= 13.1
Provides : util-linux:/usr/lib/systemd/system/fstrim.service
# Service files are being migrated during the update from SLE < 12 and openSUSE <= 13.1
Conflicts : util-linux < 2.25
2014-10-31 16:22:34 +01:00
%systemd_requires
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%else
# ERROR: No build_* variables are set.
%endif
%endif
%endif
%if %build_util_linux
%description
This package contains a large variety of low-level system utilities
that are necessary for a Linux system to function. It contains the
mount program, the fdisk configuration tool, and more.
%package -n libblkid1
Summary : Filesystem detection library
Group : System/Filesystems
%description -n libblkid1
Library for filesystem detection.
%package -n libblkid-devel
Summary : Development files for the filesystem detection library
Group : Development/Libraries/C and C++
Requires : libblkid1 = %{version}
%description -n libblkid-devel
Files needed to develop applications using the library for filesystem
detection.
%package -n libblkid-devel-static
Summary : Development files for the filesystem detection library
Group : Development/Libraries/C and C++
Requires : libblkid-devel = %{version}
%description -n libblkid-devel-static
Files needed to develop applications using the library for filesystem
detection.
%package -n libuuid1
Summary : Library to generate UUIDs
Group : System/Filesystems
%description -n libuuid1
A library to generate universally unique IDs (UUIDs).
%package -n libuuid-devel
Summary : Development files for libuuid1
Group : Development/Libraries/C and C++
Requires : libuuid1 = %{version}
%description -n libuuid-devel
Files to develop applications using the library to generate universally
unique IDs (UUIDs).
%package -n libuuid-devel-static
Summary : Development files for libuuid1
Group : Development/Libraries/C and C++
Requires : libuuid-devel = %{version}
%description -n libuuid-devel-static
Files to develop applications using the library to generate universally
unique IDs (UUIDs).
%package -n libmount1
Summary : Device mount library
Group : System/Filesystems
%description -n libmount1
Library designed to be used in low-level utils like
mount(8) and /usr/sbin/mount.<type> helpers.
%package -n libmount-devel
Summary : Development files for libmount1
Group : Development/Libraries/C and C++
Requires : libmount1 = %{version}
%package -n libmount-devel-static
Summary : Development files for libmount1
Group : Development/Libraries/C and C++
Requires : libmount-devel = %{version}
%description -n libmount-devel-static
Files to develop applications using the libmount library.
%description -n libmount-devel
Files to develop applications using the libmount library.
%package -n libsmartcols1
Summary : Column-based text sort engine
Group : System/Libraries
%description -n libsmartcols1
Library to sort human readable column-based text output.
%package -n libsmartcols-devel
Summary : Development files for libsmartcols1
Group : Development/Libraries/C and C++
Requires : libsmartcols1 = %{version}
%description -n libsmartcols-devel
Files to develop applications using the libsmartcols library.
%package -n libsmartcols-devel-static
Summary : Development files for libsmartcols1
Group : Development/Libraries/C and C++
Requires : libsmartcols-devel = %{version}
%description -n libsmartcols-devel-static
Files to develop applications using the libsmartcols library.
%lang_package
%endif
%if %build_util_linux_systemd
%if %build_util_linux
%package systemd
2014-08-21 22:06:54 +02:00
Summary : %summary_uls
Group : %group_uls
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
Supplements: packageand(util-linux:systemd)
# Split-provides for upgrade from SLE < 12 and openSUSE <= 13.1
Provides : util-linux:/usr/lib/systemd/system/fstrim.service
# Service files are being migrated during the update from SLE < 12 and openSUSE <= 13.1
Conflicts : util-linux < 2.25
%description systemd
%else
%description
%endif
This package contains low-level util-linux utilities that use systemd.
%package -n uuidd
Summary : Helper daemon to guarantee uniqueness of time-based UUIDs
Group : System/Filesystems
2014-10-31 16:22:34 +01:00
Requires(pre) : /usr/sbin/groupadd
Requires(pre) : /usr/sbin/useradd
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
# uuidd bash-completion moved to a correct package
Conflicts : util-linux < 2.25
2014-10-31 16:22:34 +01:00
%systemd_requires
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%description -n uuidd
The uuidd package contains a userspace daemon (uuidd) which guarantees
uniqueness of time-based UUID generation even at very high rates on
SMP systems.
%endif
%if %build_python_libmount
%if %build_util_linux
%package -n python-libmount
2014-08-21 22:06:54 +02:00
Summary : %summary_pl
Group : %group_pl
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%description -n python-libmount
%else
%description
%endif
This package contains the python bindings for util-linux libmount
library.
%endif
%prep
%if %verify_sig
xzcat %{S:0} | %gpg_verify -p %{_name} %{S:12} -
%endif
%setup -q -n %{_name}-%{version} -b 40
%patch4 -p1
%patch12 -p1
#
# setctsid
cp -p %{S:22} %{S:23} .
pushd ../klogconsole
%patch55 -p1
%patch56 -p1
popd
%build
2014-10-31 16:22:34 +01:00
#BEGIN CONFIG ALTER
%if !%build_util_linux_systemd
# We are not building util_linux_systemd => we are not building uuidd
# But we want libuuid with support of uuidd. The default configure disables it as well.
sed -i '/^AM_CONDITIONAL.*BUILD_UUIDD/a AC_DEFINE([HAVE_UUIDD], [1], [Define to 1 if you want to use uuid daemon.])' configure.ac
%endif
#END CONFIG ALTER
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%if %build_util_linux
pushd ../klogconsole
# klogconsole build
make %{?_smp_mflags} CFLAGS=" %{optflags} " CC=" %{__cc} "
popd
# setctsid build
rm -f setctsid
make %{?_smp_mflags} setctsid CFLAGS=" %{optflags} " CC=" %{__cc} "
#
#BEGIN SYSTEMD SAFETY CHECK
# With systemd, some utilities are built differently. Keep track of these
# sources to prevent building of systemd-less versions.
#
# WARNING: Never edit following line without doing all suggested in the echo below!
UTIL_LINUX_KNOWN_SYSTEMD_DEPS='./login-utils/lslogins.c ./misc-utils/logger.c ./misc-utils/uuidd.c '
UTIL_LINUX_FOUND_SYSTEMD_DEPS=$(grep -rl 'HAVE_LIBSYSTEMD' . | fgrep '.c' | LC_ALL=C sort | tr '\n' ' ' )
if test " $ U T I L _ L I N U X _ K N O W N _ S Y S T E M D _ D E P S " != " $ U T I L _ L I N U X _ F O U N D _ S Y S T E M D _ D E P S " ; then
echo " L i s t o f u t i l i t i e s d e p e n d i n g o n s y s t e m d h a v e c h a n g e d .
Please check the new util-linux-systemd file list, file removal and update of Conflicts for safe update!
Then update configure options to build what needed.
Only then you can safely update following spec file line:
UTIL_LINUX_KNOWN_SYSTEMD_DEPS='$UTIL_LINUX_FOUND_SYSTEMD_DEPS' "
exit 1
fi
#END SYSTEMD SAFETY CHECK
#BEGIN FIRST STAGE MODIFICATIONS
%if !%build_util_linux_systemd
sed -i 's/BUILD_LSLOGINS/FALSE/
s/BUILD_LOGGER/FALSE/
' misc-utils/Makemodule.am login-utils/Makemodule.am bash-completion/Makemodule.am
autoreconf -f -i
%endif
#END FIRST STAGE MODIFICATIONS
%else
#BEGIN SECOND STAGE MODIFICATIONS
# delete all make modules except wanted ones
sed -i '/^include/{
%if %build_python_libmount
/libmount\/Makemodule.am/b 1
%endif
%if %build_util_linux_systemd
# for lslogins
/login-utils/b 1
# for logger and uuidd
/misc-utils/b 1
# for fstrim.service and fstrim.timer
/sys-utils/b 1
# for uninstalled libcommon required by uuidd
/ lib\//b 1
# for bash completions
/bash-completion/b 1
# we always want tests (they are smart enough to skip irrelevant parts)
/tests/b 1
%endif
%if %build_python_libmount
/libmount\/python/b 1
%endif
d
:1
}' Makefile.am libmount/Makemodule.am
%if %build_python_libmount
# trick: we do not want to build libmount, but include subdirs
# We close prefious if FALSE and open new pairing with endif
sed -i '/^if BUILD_LIBMOUNT/d
/^if ENABLE_GTK_DOC/i \
if BUILD_LIBMOUNT
' libmount/Makemodule.am
# Do not install terminal-colors.d.5
sed -i '/dist_man_MANS/d' lib/Makemodule.am
%endif
# disable all make modules except wanted ones
sed -i '/^if BUILD_/{
%if %build_util_linux_systemd
/LSLOGINS/b 1
/LOGGER/b 1
/UUIDD/b 1
/BASH_COMPLETION/b 1
%endif
s/BUILD_.*/FALSE/
:1
}
' libmount/Makemodule.am misc-utils/Makemodule.am login-utils/Makemodule.am sys-utils/Makemodule.am bash-completion/Makemodule.am
%if %build_util_linux_systemd
# trick: we do not want to build fstrim, but we want to install fstrim systemd connectors
# We close prefious if FALSE and open new pairing with endif
sed -i '/^if HAVE_SYSTEMD/i \
endif\
if TRUE
' sys-utils/Makemodule.am
# Do not install terminal-colors.d.5
sed -i '/dist_man_MANS/d' lib/Makemodule.am
%endif
# Use installed first stage libraries
sed -i '
# extra space to not replace pylibmount.la
s/ libmount\.la/ -lmount/g
s/libuuid\.la/-luuid/g
s/libblkid\.la/-lblkid/g
s/libsmartcols\.la/-lsmartcols/g
' libmount/python/Makemodule.am misc-utils/Makemodule.am login-utils/Makemodule.am
# Ignore dependencies on optional (and not built in second stage) libraries
sed -i '
/AM_GNU_GETTEXT/d
s/UL_REQUIRES_BUILD(\[.*\], \[libuuid\])/dnl &/
s/UL_REQUIRES_BUILD(\[.*\], \[libsmartcols\])/dnl &/
' configure.ac
sed -i '
/SUBDIRS =/s/ po//
' Makefile.am
autoreconf -f -i
#END SECOND STAGE MODIFICATIONS
%endif
#
# util-linux itself
#
# Version check for libutempter
#
uhead=$(find %_includedir -name utempter.h 2>/dev/null)
if test -n " $ u h e a d " && grep -q utempter_add_record " $ u h e a d "
then
uhead=--with-utempter
else
uhead=--without-utempter
fi
export SUID_CFLAGS=" - f p i e "
export SUID_LDFLAGS=" - p i e "
# override default localstatedir to /run
# only used for volatile data
#
# SUSE now supports only systemd based system. We do not build
# sysvinit-only versions of UTIL_LINUX_SYSTEMD_SOURCES utilities.
%configure \
--localstatedir=/run \
--docdir=%{_docdir} /%{_name} \
--with-audit \
--with-gnu-ld \
--with-ncurses \
--with-selinux \
$uhead \
--with-bashcompletiondir=%{_datadir} /bash-completion \
--enable-all-programs \
--disable-reset \
--disable-use-tty-group \
--disable-silent-rules \
--enable-static \
--disable-rpath \
%if %{without enable_last}
--disable-last \
%endif
%if %{without enable_eject}
--disable-eject \
%endif
%if %{with sysvinit_tools}
--enable-sulogin-emergency-mount \
%else
--disable-sulogin \
--disable-mountpoint \
%endif
%if %{without enable_su}
--disable-su \
--disable-kill \
%endif
%if %build_util_linux_systemd
--enable-uuidd \
--with-systemd \
--with-systemdsystemunitdir=%{_unitdir} \
%else
--disable-uuidd \
--without-systemd \
%endif
%if %build_python_libmount
--with-python \
%else
--without-python \
%endif
#
2014-10-31 16:22:34 +01:00
# Safety check: HAVE_UUIDD should be always 1:
grep -q 'HAVE_UUIDD 1' config.h
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
make %{?_smp_mflags}
#
%if %build_util_linux
%{__cc} -fwhole-program %{optflags} -o mkzimage_cmdline %{S:29}
%{__cc} -fwhole-program %{optflags} -o chrp-addnote %{SOURCE31}
%endif
%check
# mark some tests "known_fail"
2014-11-12 21:02:45 +01:00
%ifarch ppc64le
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
export TS_OPT_fdisk_bsd_known_fail=" y e s "
%endif
%ifarch %{ix86}
export TS_OPT_misc_setarch_known_fail=" y e s "
%endif
#
%if 0%{?suse_version} > 1310
2014-08-26 16:12:01 +02:00
# glibc requires kernel >= 3.0, thus setarch --uname-2.6 fails on platforms without VDSO
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
export TS_OPT_misc_setarch_known_fail=" y e s "
%endif
#
%ifarch armv6l armv6hl aarch64
export TS_OPT_fdisk_gpt_known_fail=" y e s "
export TS_OPT_fdisk_oddinput_known_fail=" y e s "
export TS_OPT_fdisk_sunlabel_known_fail=" y e s "
export TS_OPT_misc_ionice_known_fail=" y e s "
export TS_OPT_misc_swaplabel_known_fail=" y e s "
export TS_OPT_kill_name_to_number_known_fail=" y e s "
export TS_OPT_kill_print_pid_known_fail=" y e s "
export TS_OPT_kill_queue_known_fail=" y e s "
%endif
%ifarch aarch64 s390 s390x
export TS_OPT_utmpdump_known_fail=" y e s "
%endif
# FIXME: These sometimes fails:
export TS_OPT_libmount_lock_known_fail=" y e s "
2014-09-05 12:56:25 +02:00
# FIXME: It still fails with 3a9ec12:
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
export TS_OPT_ipcs_limits2_known_fail=" y e s "
#
# hacks
export PATH=" $ P A T H : / s b i n : / u s r / s b i n "
#
# do the check but don't abort yet
result=" 0 "
make %{?_smp_mflags} check || result=" 1 "
#
# always show test diffs (inclusive known_fail) and exit result
diffs_files=" $ ( f i n d t e s t s / d i f f - t y p e f | s o r t ) "
echo " $ d i f f s _ f i l e s " | xargs -r cat
2014-08-26 16:14:33 +02:00
exit " $ r e s u l t "
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%install
%if %build_util_linux
mkdir -p %{buildroot} {%{_sysconfdir} /{init.d,pam.d,default},%{_mandir} /man{1,8},/bin,/sbin,%{_bindir} ,%{_sbindir} ,%{_infodir} }
install -m 644 %{SOURCE51} %{buildroot} %{_sysconfdir} /blkid.conf
install -m 644 %{SOURCE8} %{buildroot} %{_sysconfdir} /pam.d/login
install -m 644 %{SOURCE9} %{buildroot} %{_sysconfdir} /pam.d/remote
2014-09-12 19:54:43 +02:00
install -m 644 %{SOURCE14} %{buildroot} %{_sysconfdir} /pam.d/runuser
install -m 644 %{SOURCE14} %{buildroot} %{_sysconfdir} /pam.d/runuser-l
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%if %{with enable_su}
install -m 644 %{SOURCE10} %{buildroot} %{_sysconfdir} /pam.d/su
install -m 644 %{SOURCE10} %{buildroot} %{_sysconfdir} /pam.d/su-l
install -m 644 %{SOURCE11} %{buildroot} %{_sysconfdir} /default/su
%endif
mkdir -p %{buildroot} %{_localstatedir} /adm/fillup-templates
pushd ../klogconsole
# klogconsole install
make install DEST=%{buildroot}
popd
%endif
#
# util-linux install
#
%make_install
rm -f %{buildroot} %{python_sitearch} /libmount/*.*a
%if %build_util_linux
#UsrMerge
%if %{with enable_su}
ln -s %{_bindir} /kill %{buildroot} /bin
ln -s %{_bindir} /su %{buildroot} /bin
%endif
ln -s %{_bindir} /dmesg %{buildroot} /bin
ln -s %{_bindir} /more %{buildroot} /bin
ln -s %{_bindir} /mount %{buildroot} /bin
ln -s %{_bindir} /umount %{buildroot} /bin
ln -s %{_bindir} /findmnt %{buildroot} /bin
ln -s %{_bindir} /lsblk %{buildroot} /bin
ln -s %{_sbindir} /agetty %{buildroot} /sbin
ln -s %{_sbindir} /blockdev %{buildroot} /sbin
ln -s %{_sbindir} /cfdisk %{buildroot} /sbin
ln -s %{_sbindir} /ctrlaltdel %{buildroot} /sbin
ln -s %{_sbindir} /fdisk %{buildroot} /sbin
ln -s %{_sbindir} /fsck.minix %{buildroot} /sbin
ln -s %{_sbindir} /fsck.cramfs %{buildroot} /sbin
ln -s %{_sbindir} /hwclock %{buildroot} /sbin
ln -s %{_sbindir} /losetup %{buildroot} /sbin
ln -s %{_sbindir} /mkfs %{buildroot} /sbin
ln -s %{_sbindir} /mkfs.bfs %{buildroot} /sbin
ln -s %{_sbindir} /mkfs.minix %{buildroot} /sbin
ln -s %{_sbindir} /mkfs.cramfs %{buildroot} /sbin
ln -s %{_sbindir} /mkswap %{buildroot} /sbin
ln -s %{_sbindir} /nologin %{buildroot} /sbin
ln -s %{_sbindir} /pivot_root %{buildroot} /sbin
ln -s %{_sbindir} /raw %{buildroot} /sbin
ln -s %{_sbindir} /sfdisk %{buildroot} /sbin
ln -s %{_sbindir} /swapoff %{buildroot} /sbin
ln -s %{_sbindir} /swapon %{buildroot} /sbin
ln -s %{_sbindir} /blkid %{buildroot} /sbin
ln -s %{_sbindir} /findfs %{buildroot} /sbin
ln -s %{_sbindir} /fsck %{buildroot} /sbin
ln -s %{_sbindir} /switch_root %{buildroot} /sbin
ln -s %{_sbindir} /wipefs %{buildroot} /sbin
ln -s %{_sbindir} /fsfreeze %{buildroot} /sbin
ln -s %{_sbindir} /swaplabel %{buildroot} /sbin
ln -s %{_sbindir} /fstrim %{buildroot} /sbin
ln -s %{_sbindir} /chcpu %{buildroot} /sbin
#EndUsrMerge
install -m 644 %{SOURCE6} %{buildroot} %{_sysconfdir} /filesystems
%ifnarch ppc ppc64
install -m 755 mkzimage_cmdline %{buildroot} %{_bindir}
install -m 644 %{S:28} %{buildroot} %{_mandir} /man8
install -m 755 chrp-addnote %{buildroot} %{_bindir}
%endif
# setctsid install
install -m 755 setctsid %{buildroot} %{_sbindir}
install -m 444 setctsid.8 %{buildroot} %{_mandir} /man8/
echo -e " # ! / b i n / b a s h \n / s b i n / b l o c k d e v - - f l u s h b u f s \ $ 1 " > %{buildroot} %{_sbindir} /flushb
chmod 755 %{buildroot} %{_sbindir} /flushb
# Install scripts to configure raw devices at boot time
install -m 644 $RPM_SOURCE_DIR %{_sysconfdir} .raw %{buildroot} %{_sysconfdir} /raw
install -m 755 $RPM_SOURCE_DIR /raw.init %{buildroot} %{_initddir} /raw
ln -sf ../..%{_sysconfdir} /init.d/raw %{buildroot} %{_sbindir} /rcraw
# upstream moved getopt examples from datadir to docdir but we keep
# the old location because we would need to fix the manpage first
mv %{buildroot} %{_docdir} /%{_name}/getopt %{buildroot} %{_datadir} /
# Stupid hack so we don't have a tcsh dependency
chmod 644 %{buildroot} %{_datadir} /getopt/getopt*.tcsh
# Following files we don't want to package, so remove them
rm -f %{buildroot} %{_bindir} /pg
rm -f %{buildroot} %{_mandir} /man1/pg.1*
# Do not package these files to get rid of the perl dependency
rm -f %{buildroot} %{_bindir} /chkdupexe
rm -f %{buildroot} %{_mandir} /man1/chkdupexe.1
# we use this tools from pwdutils
rm -f %{buildroot} %{_bindir} /{chfn,chsh,newgrp}
rm -f %{buildroot} %{_sbindir} /{vigr,vipw}
rm -f %{buildroot} %{_mandir} /man1/{chfn.1*,chsh.1*,newgrp.1*}
rm -f %{buildroot} %{_mandir} /man8/{vigr.8*,vipw.8*}
# login is always and only in /bin
mv %{buildroot} %{_bindir} /login %{buildroot} /bin/
# arch dependent
%ifarch s390 s390x
rm -f %{buildroot} %{_sysconfdir} /fdprm
rm -f %{buildroot} %{_sbindir} /fdformat
rm -f %{buildroot} %{_sbindir} /hwclock
#UsrMerge
rm -f %{buildroot} /sbin/hwclock
#EndUsrMerge
rm -f %{buildroot} %{_sbindir} /klogconsole
rm -f %{buildroot} %{_bindir} /setterm
rm -f %{buildroot} %{_sbindir} /tunelp
rm -f %{buildroot} %{_mandir} /man8/fdformat.8*
rm -f %{buildroot} %{_mandir} /man8/hwclock.8*
rm -f %{buildroot} %{_mandir} /man8/klogconsole.8*
rm -f %{buildroot} %{_mandir} /man8/tunelp.8*
%endif
%ifarch ia64 %sparc m68k
rm -f %{buildroot} %{_mandir} /man8/cfdisk.8*
rm -f %{buildroot} %{_mandir} /man8/sfdisk.8*
rm -f %{buildroot} %{_sbindir} /cfdisk
#UsrMerge
rm -f %{buildroot} /sbin/cfdisk
#EndUsrMerge
rm -f %{buildroot} %{_sbindir} /sfdisk
#UsrMerge
rm -f %{buildroot} /sbin/sfdisk
#EndUsrMerge
%endif
%ifarch ia64 m68k
rm -f %{buildroot} %{_sbindir} /fdisk
#UsrMerge
rm -f %{buildroot} /sbin/fdisk
#EndUsrMerge
rm -f %{buildroot} %{_mandir} /man8/fdisk.8*
%endif
%find_lang %{name} %{name} .lang
# create list of setarch(8) symlinks
find %{buildroot} %{_bindir} / -regextype posix-egrep -type l \
-regex " . * ( l i n u x 3 2 | l i n u x 6 4 | s 3 9 0 | s 3 9 0 x | i 3 8 6 | p p c | p p c 6 4 | p p c 3 2 | s p a r c | s p a r c 6 4 | s p a r c 3 2 | s p a r c 3 2 b a s h | m i p s | m i p s 6 4 | m i p s 3 2 | i a 6 4 | x 8 6 _ 6 4 | p a r i s c | p a r i s c 3 2 | p a r i s c 6 4 ) $ " \
-printf " %{_bindir} / % f \n " >> %{name} .files
find %{buildroot} %{_mandir} /man8 -regextype posix-egrep \
-regex " . * ( l i n u x 3 2 | l i n u x 6 4 | s 3 9 0 | s 3 9 0 x | i 3 8 6 | p p c | p p c 6 4 | p p c 3 2 | s p a r c | s p a r c 6 4 | s p a r c 3 2 | s p a r c 3 2 b a s h | m i p s | m i p s 6 4 | m i p s 3 2 | i a 6 4 | x 8 6 _ 6 4 | p a r i s c | p a r i s c 3 2 | p a r i s c 6 4 ) \ . 8 . * " \
-printf " %{_mandir} / m a n 8 / % f * \n " >> %{name} .files
%else
# install systemd files manually, don't use Makefile that expect build of utilities and its dependencies.
%endif
%if %build_util_linux_systemd
mkdir -p %{buildroot} /bin
mkdir -p %{buildroot} %{_sbindir}
mkdir -p %{buildroot} %{_localstatedir} /lib/libuuid
mkdir -p %{buildroot} /run/uuidd
2014-10-31 16:22:34 +01:00
mkdir -p %{buildroot} /usr/lib/systemd/system-preset
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
ln -s %{_bindir} /logger %{buildroot} /bin
# clock.txt from uuidd is a ghost file
touch %{buildroot} %{_localstatedir} /lib/libuuid/clock.txt
2014-10-31 16:22:34 +01:00
ln -sf /sbin/service %{buildroot} /usr/sbin/rcuuidd
ln -sf /sbin/service %{buildroot} /usr/sbin/rcfstrim
# Use socket activated uuidd by default.
echo -e 'enable uuidd.socket\nenable uuidd.service' >%{buildroot} /usr/lib/systemd/system-preset/50-uuidd.preset
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%if !%build_util_linux
%make_install
%endif
%endif
# link duplicate manpages and python bindings
%fdupes -s %{buildroot} %{_prefix}
%if %build_util_linux
%post
%{fillup_and_insserv raw}
%set_permissions %{_bindir} /wall %{_bindir} /write %{_bindir} /mount %{_bindir} /umount
%if %{with enable_su}
%set_permissions %{_bindir} /su
# Safely migrate PAM files from coreutils to util-linux
# (openSUSE 12.3->13.1, SLE11->SLE12)
#
# coreutils with su were upgraded (and su removed) before util-linux
# with su was installed (see the Conflicts above). If the admin edited
# the PAM file, the seemingly no more used modified file was saved as
# .rpmsave and the new clean file was installed. As we want
# "noreplace" upgrade, and the contents of the clean file contents has
# no changes, we should restore admin modification, and rename the
# clean file to .rpmnew, as it would happen if the file was not moved
# from one package to another.
for PAM_FILE in default/su pam.d/su pam.d/su-l ; do
if test -f %{_sysconfdir} /$PAM_FILE.rpmsave ; then
mv %{_sysconfdir} /$PAM_FILE %{_sysconfdir} /$PAM_FILE.rpmnew
mv %{_sysconfdir} /$PAM_FILE.rpmsave %{_sysconfdir} /$PAM_FILE
fi
done
%endif
# mount option 'code=' is now called 'codepage=' so change fstab
if [ -f etc/fstab ]; then
sed -i 's:code=:codepage=:' etc/fstab
fi
%postun
%install _info_delete --info-dir=%{_infodir} %{_infodir}/ipc.info.gz
%{insserv_cleanup}
%verify script
%verify _permissions -e %{_bindir} /wall -e %{_bindir} /write -e %{_bindir} /mount -e %{_bindir} /umount
%if %{with enable_su}
%verify _permissions -e %{_bindir} /su
%endif
%post -n libblkid1 -p /sbin/ldconfig
%postun -n libblkid1 -p /sbin/ldconfig
%post -n libmount1 -p /sbin/ldconfig
%postun -n libmount1 -p /sbin/ldconfig
%post -n libsmartcols1 -p /sbin/ldconfig
%postun -n libsmartcols1 -p /sbin/ldconfig
%post -n libuuid1 -p /sbin/ldconfig
%postun -n libuuid1 -p /sbin/ldconfig
%files lang -f %{name}.lang
%endif
%if %build_util_linux_systemd
2014-10-31 16:22:34 +01:00
# Note: This is not a perfect solution: fstrim is part of util-linux, fstrim services are part of util-linux-systemd (for build loop prevention reasons).
# If only util-linux is updated, restart of fstrim service does not happen.
# Maybe we should move fstrim to util-linux-systemd in the next version.
%pre -n util-linux-systemd
%{service_add_pre fstrim.service fstrim.timer}
%post -n util-linux-systemd
%{service_add_post fstrim.service fstrim.timer}
%preun -n util-linux-systemd
%{service_del_preun fstrim.service fstrim.timer}
%postun -n util-linux-systemd
%{service_del_postun fstrim.service fstrim.timer}
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%pre -n uuidd
2014-10-31 16:22:34 +01:00
/usr/sbin/groupadd -r uuidd 2>/dev/null || :
/usr/sbin/useradd -r -g uuidd -c " U s e r f o r u u i d d " \
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
-d /var/run/uuidd uuidd 2>/dev/null || :
2014-10-31 16:22:34 +01:00
%{service_add_pre uuidd.socket uuidd.service}
# trick: service existed before, but it had no preset before 13.2 and in SLE12. Force %%service_add_post to run preset.
if [ $1 -gt 1 ] ; then
if ! test -f /usr/lib/systemd/system-preset/50-uuidd.preset ; then
echo -n " " >/run/rpm-%{name} -update-uuidd.socket-new-in-upgrade
echo -n " " >/run/rpm-%{name} -update-uuidd.service-new-in-upgrade
fi
fi
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%post -n uuidd
2014-10-31 16:22:34 +01:00
%{service_add_post uuidd.socket uuidd.service}
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
2014-10-31 16:22:34 +01:00
%preun -n uuidd
%{service_del_preun uuidd.socket uuidd.service}
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
2014-10-31 16:22:34 +01:00
%postun -n uuidd
%{service_del_postun uuidd.socket uuidd.service}
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%endif
%if %build_util_linux
%files -f %{name}.files
# Common files for all archs
%defattr (-,root,root)
# util-linux documentation files
%doc Documentation/blkid.txt
%doc Documentation/cal.txt
%doc Documentation/col.txt
%doc Documentation/deprecated.txt
%doc Documentation/fdisk.txt
%doc Documentation/getopt.txt
%doc Documentation/howto-debug.txt
%doc Documentation/hwclock.txt
%doc Documentation/modems-with-agetty.txt
%doc Documentation/mount.txt
%doc Documentation/pg.txt
%doc Documentation/sfdisk.txt
%config %attr (744,root,root) %{_sysconfdir} /init.d/raw
%config (noreplace) %attr (644,root,root) %{_sysconfdir} /raw
%config (noreplace) %{_sysconfdir} /filesystems
%config (noreplace) %{_sysconfdir} /blkid.conf
%config (noreplace) %{_sysconfdir} /pam.d/login
%config (noreplace) %{_sysconfdir} /pam.d/remote
2014-09-12 19:54:43 +02:00
%config (noreplace) %{_sysconfdir} /pam.d/runuser
%config (noreplace) %{_sysconfdir} /pam.d/runuser-l
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%if %{with enable_su}
%config (noreplace) %{_sysconfdir} /pam.d/su
%config (noreplace) %{_sysconfdir} /pam.d/su-l
%config (noreplace) %{_sysconfdir} /default/su
%endif
#UsrMerge
%if %{with enable_su}
/bin/kill
/bin/su
%endif
/bin/dmesg
/bin/more
/bin/mount
/bin/umount
/bin/findmnt
/bin/login
/bin/lsblk
/sbin/agetty
/sbin/blockdev
/sbin/ctrlaltdel
/sbin/fsck.minix
/sbin/fsck.cramfs
/sbin/losetup
/sbin/mkfs
/sbin/mkfs.bfs
/sbin/mkfs.minix
/sbin/mkfs.cramfs
/sbin/mkswap
/sbin/nologin
/sbin/pivot_root
/sbin/raw
/sbin/swapoff
/sbin/swapon
/sbin/blkid
/sbin/findfs
/sbin/fsck
/sbin/switch_root
/sbin/wipefs
/sbin/fsfreeze
/sbin/swaplabel
/sbin/fstrim
/sbin/chcpu
#EndUsrMerge
%if %{with enable_su}
%{_bindir} /kill
%{_bindir} /su
%endif
%if %{with enable_eject}
%if 0%{?suse_version} <= 1310
%verify (not mode) %attr (4750,root,audio) %{_bindir} /eject
%else
%{_bindir} /eject
%endif
%endif
%{_bindir} /cal
%{_bindir} /chrt
%{_bindir} /col
%{_bindir} /colcrt
%{_bindir} /colrm
%{_bindir} /column
%{_bindir} /dmesg
%{_bindir} /fallocate
%{_bindir} /findmnt
%{_bindir} /flock
%{_bindir} /getopt
%{_bindir} /hexdump
%{_bindir} /ionice
%{_bindir} /ipcmk
%{_bindir} /ipcrm
%{_bindir} /ipcs
%{_bindir} /isosize
%if %{with enable_last}
%{_bindir} /last
%{_bindir} /lastb
%endif
%{_bindir} /line
%{_bindir} /look
%{_bindir} /lsblk
%{_bindir} /lscpu
%{_bindir} /lslocks
%{_bindir} /mcookie
%{_bindir} /mesg
%{_bindir} /more
%{_bindir} /mount
%{_bindir} /namei
%{_bindir} /nsenter
%{_bindir} /prlimit
%{_bindir} /rename
%{_bindir} /renice
%{_bindir} /rev
%{_bindir} /script
%{_bindir} /scriptreplay
%{_bindir} /setarch
%{_bindir} /setpriv
%{_bindir} /setsid
%{_bindir} /tailf
%{_bindir} /taskset
%{_bindir} /ul
%{_bindir} /umount
%{_bindir} /unshare
%if %{with sysvinit_tools}
%{_bindir} /mountpoint
%{_bindir} /utmpdump
%endif
%{_bindir} /uuidgen
%{_bindir} /uname26
%ifnarch ppc ppc64
%{_bindir} /chrp-addnote
%{_bindir} /mkzimage_cmdline
%endif
%{_bindir} /wdctl
%{_sbindir} /addpart
%{_sbindir} /agetty
%{_sbindir} /blkid
%{_sbindir} /blkdiscard
%{_sbindir} /blockdev
%{_sbindir} /chcpu
%{_sbindir} /ctrlaltdel
%{_sbindir} /delpart
%{_sbindir} /findfs
%{_sbindir} /fsck
%{_sbindir} /fsck.minix
%{_sbindir} /fsck.cramfs
%{_sbindir} /fsfreeze
%{_sbindir} /fstrim
%{_sbindir} /ldattach
%{_sbindir} /losetup
%{_sbindir} /mkfs
%{_sbindir} /mkfs.bfs
%{_sbindir} /mkfs.minix
%{_sbindir} /mkfs.cramfs
%{_sbindir} /mkswap
%{_sbindir} /nologin
%{_sbindir} /partx
%{_sbindir} /pivot_root
%{_sbindir} /raw
%{_sbindir} /rcraw
%{_sbindir} /resizepart
%{_sbindir} /rtcwake
%{_sbindir} /runuser
%{_sbindir} /setctsid
%if %{with sysvinit_tools}
%{_sbindir} /sulogin
%endif
%{_sbindir} /swaplabel
%{_sbindir} /swapoff
%{_sbindir} /swapon
%{_sbindir} /switch_root
%{_sbindir} /wipefs
%verify (not mode) %attr (0755,root,tty) %{_bindir} /wall
%{_bindir} /whereis
%verify (not mode) %attr (0755,root,tty) %{_bindir} /write
%if %{with enable_su}
%{_mandir} /man1/kill.1.gz
%{_mandir} /man1/su.1.gz
%endif
%{_mandir} /man1/cal.1.gz
%{_mandir} /man1/chrt.1.gz
%{_mandir} /man1/col.1.gz
%{_mandir} /man1/colcrt.1.gz
%{_mandir} /man1/colrm.1.gz
%{_mandir} /man1/column.1.gz
%{_mandir} /man1/dmesg.1.gz
%if %{with enable_eject}
%{_mandir} /man1/eject.1.gz
%endif
%{_mandir} /man1/fallocate.1.gz
%{_mandir} /man1/flock.1.gz
%{_mandir} /man1/getopt.1.gz
%{_mandir} /man1/hexdump.1.gz
%{_mandir} /man1/ipcrm.1.gz
%{_mandir} /man1/ipcs.1.gz
%if %{with enable_last}
%{_mandir} /man1/last.1.gz
%{_mandir} /man1/lastb.1.gz
%endif
%{_mandir} /man1/line.1.gz
%{_mandir} /man1/login.1.gz
%{_mandir} /man1/look.1.gz
%{_mandir} /man1/lscpu.1.gz
%{_mandir} /man1/mcookie.1.gz
%{_mandir} /man1/mesg.1.gz
%{_mandir} /man1/more.1.gz
%{_mandir} /man1/namei.1.gz
%{_mandir} /man1/nsenter.1.gz
%{_mandir} /man1/ionice.1.gz
%{_mandir} /man1/prlimit.1.gz
%{_mandir} /man1/rename.1.gz
%{_mandir} /man1/rev.1.gz
%{_mandir} /man1/renice.1.gz
%{_mandir} /man1/setpriv.1.gz
%{_mandir} /man1/setsid.1.gz
%{_mandir} /man1/script.1.gz
%{_mandir} /man1/scriptreplay.1.gz
%{_mandir} /man1/setterm.1.gz
%{_mandir} /man1/tailf.1.gz
%{_mandir} /man1/taskset.1.gz
%{_mandir} /man1/ul.1.gz
%{_mandir} /man1/unshare.1.gz
%{_mandir} /man1/wall.1.gz
%{_mandir} /man1/whereis.1.gz
%{_mandir} /man1/write.1.gz
%{_mandir} /man1/ipcmk.1.gz
%if %{with sysvinit_tools}
%{_mandir} /man1/mountpoint.1.gz
%{_mandir} /man1/utmpdump.1.gz
%endif
%{_mandir} /man1/runuser.1.gz
%{_mandir} /man1/uuidgen.1.gz
%{_mandir} /man5/fstab.5.gz
%{_mandir} /man5/terminal-colors.d.5.gz
%{_mandir} /man8/addpart.8.gz
%{_mandir} /man8/agetty.8.gz
%{_mandir} /man8/blockdev.8.gz
%{_mandir} /man8/delpart.8.gz
%{_mandir} /man8/ctrlaltdel.8.gz
%{_mandir} /man8/blkid.8.gz
%{_mandir} /man8/blkdiscard.8.gz
%{_mandir} /man8/switch_root.8.gz
%{_mandir} /man8/mkfs.bfs.8.gz
%{_mandir} /man8/mkfs.minix.8.gz
%{_mandir} /man8/findfs.8.gz
%{_mandir} /man8/fsck.8.gz
%{_mandir} /man8/fsck.cramfs.8.gz
%{_mandir} /man8/fsck.minix.8.gz
%{_mandir} /man8/isosize.8.gz
%{_mandir} /man8/ldattach.8.gz
%{_mandir} /man8/losetup.8.gz
%{_mandir} /man8/lslocks.8.gz
%{_mandir} /man8/mkfs.8.gz
%{_mandir} /man8/mkfs.cramfs.8.gz
%{_mandir} /man8/mkswap.8.gz
%{_mandir} /man8/mount.8.gz
%{_mandir} /man8/nologin.8.gz
%{_mandir} /man8/findmnt.8.gz
%{_mandir} /man8/fsfreeze.8.gz
%{_mandir} /man8/swaplabel.8.gz
%{_mandir} /man8/readprofile.8.gz
%{_mandir} /man8/chcpu.8.gz
%ifnarch ppc ppc64
%{_mandir} /man8/mkzimage_cmdline.8.gz
%endif
%{_mandir} /man8/partx.8.gz
%{_mandir} /man8/pivot_root.8.gz
%{_mandir} /man8/raw.8.gz
%{_mandir} /man8/rtcwake.8.gz
%{_mandir} /man8/setarch.8.gz
%{_mandir} /man8/swapoff.8.gz
%{_mandir} /man8/swapon.8.gz
%{_mandir} /man8/umount.8.gz
%{_mandir} /man8/uname26.8.gz
%{_mandir} /man8/setctsid.8.gz
%{_mandir} /man8/wipefs.8.gz
%{_mandir} /man8/fstrim.8.gz
%{_mandir} /man8/lsblk.8.gz
%{_mandir} /man8/resizepart.8.gz
%if %{with sysvinit_tools}
%{_mandir} /man8/sulogin.8.gz
%endif
%{_mandir} /man8/wdctl.8.gz
%{_sbindir} /flushb
%{_sbindir} /readprofile
%dir %{_datadir} /getopt
%attr (755,root,root) %{_datadir} /getopt/getopt-parse.bash
%attr (755,root,root) %{_datadir} /getopt/getopt-parse.tcsh
# FIXME: Fix directory ownership.
%dir %{_datadir} /bash-completion
%{_datadir} /bash-completion/*
%if %build_util_linux_systemd
%exclude %{_datadir} /bash-completion/logger
%exclude %{_datadir} /bash-completion/uuidd
%endif
%ifnarch ia64 m68k
#XXX: post our patches upstream
#XXX: call fdupes on /usr/share/man
#UsrMerge
/sbin/fdisk
#EndUsrMerge
%{_sbindir} /fdisk
%{_mandir} /man8/fdisk.8.gz
%endif
%ifnarch %sparc ia64 m68k
%{_mandir} /man8/cfdisk.8.gz
%{_mandir} /man8/sfdisk.8.gz
#UsrMerge
/sbin/cfdisk
/sbin/sfdisk
#EndUsrMerge
%{_sbindir} /cfdisk
%{_sbindir} /sfdisk
%endif
%ifnarch s390 s390x
%{_sbindir} /fdformat
#UsrMerge
/sbin/hwclock
#EndUsrMerge
%{_sbindir} /hwclock
%{_sbindir} /klogconsole
%{_bindir} /setterm
%{_sbindir} /tunelp
%{_mandir} /man8/fdformat.8.gz
%{_mandir} /man8/hwclock.8.gz
%{_mandir} /man8/klogconsole.8.gz
%{_mandir} /man8/tunelp.8.gz
%endif
%files -n libblkid1
%defattr (-, root, root)
%{_libdir} /libblkid.so.1
%{_libdir} /libblkid.so.1.*
%files -n libblkid-devel
%defattr (-, root, root)
%{_libdir} /libblkid.so
%dir %{_includedir} /blkid
%{_includedir} /blkid/blkid.h
%{_libdir} /pkgconfig/blkid.pc
%{_mandir} /man3/libblkid.3.gz
%files -n libblkid-devel-static
%defattr (-, root, root)
%{_libdir} /libblkid.*a
%files -n libmount1
%defattr (-, root, root)
%{_libdir} /libmount.so.1
%{_libdir} /libmount.so.1.*
%files -n libmount-devel
%defattr (-, root, root)
%{_libdir} /libmount.so
%dir %{_includedir} /libmount
%{_includedir} /libmount/libmount.h
%{_libdir} /pkgconfig/mount.pc
%files -n libmount-devel-static
%defattr (-, root, root)
%{_libdir} /libmount.*a
%files -n libsmartcols1
%defattr (-, root, root)
%{_libdir} /libsmartcols.so.1
%{_libdir} /libsmartcols.so.1.*
%files -n libsmartcols-devel
%defattr (-, root, root)
%{_libdir} /libsmartcols.so
%dir %{_includedir} /libsmartcols
%{_includedir} /libsmartcols/libsmartcols.h
%{_libdir} /pkgconfig/smartcols.pc
%files -n libsmartcols-devel-static
%defattr (-, root, root)
%{_libdir} /libsmartcols.*a
%files -n libuuid1
%defattr (-, root, root)
%{_libdir} /libuuid.so.1
%{_libdir} /libuuid.so.1.*
%files -n libuuid-devel
%defattr (-, root, root)
%{_libdir} /libuuid.so
%dir %{_includedir} /uuid
%{_includedir} /uuid/uuid.h
%{_libdir} /pkgconfig/uuid.pc
%{_mandir} /man3/uuid*
%files -n libuuid-devel-static
%defattr (-, root, root)
%{_libdir} /libuuid.*a
%endif
%if %build_util_linux_systemd
%if %build_util_linux
%files systemd
%else
%files
%endif
%defattr (-, root, root)
/bin/logger
%{_bindir} /logger
%{_bindir} /lslogins
%{_datadir} /bash-completion/logger
%{_mandir} /man1/logger.1.gz
%{_mandir} /man1/lslogins.1.gz
2014-10-31 16:22:34 +01:00
%{_sbindir} /rcfstrim
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%{_unitdir} /fstrim.service
%{_unitdir} /fstrim.timer
%files -n uuidd
%defattr (-, root, root)
2014-10-31 16:22:34 +01:00
%{_sbindir} /uuidd
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%attr (-,uuidd,uuidd) %dir %{_localstatedir} /lib/libuuid
%ghost %{_localstatedir} /lib/libuuid/clock.txt
%attr (-,uuidd,uuidd) %ghost %dir /run/uuidd
%{_datadir} /bash-completion/uuidd
%{_mandir} /man8/uuidd.8.gz
%{_sbindir} /rcuuidd
%{_unitdir} /uuidd.service
%{_unitdir} /uuidd.socket
2014-10-31 16:22:34 +01:00
/usr/lib/systemd/system-preset/50-uuidd.preset
Accepting request 244468 from home:sbrabec:branches:Base:System
This update needs a special care:
1)
After first successful build on all platforms, "osc meta prjconf Base:System" must include:
%if 0%{?suse_version} > 1310
Preinstall: libsmartcols1
%endif
2)
You also need to make symlinks to util-linux-systemd and python-libmount.
And finally, this package is intended only for > 1310 (i. e. Factory).
3)
The spec file can have problems with (buggy) Factory check-in check:
ERROR: python-libmount: group for main package not set
There is false error and I have no work-around for this just now.
(If you want, please ping me (by mail) after package review, and I'll do all needed changes.)
- Update to version 2.25
(using work of Ruediger Meier <sweet_f_a@gmx.de>):
* based on the git master branch of util-linux
* many fixes (including bnc#869355, bnc#871951 and
bnc#871698#c49)
* new Python binding sub-package for libmount: python-libmount
* new library: libsmartcols
* new commands: lslogins, setpriv
* add fstrim systemd timer
* better systemd integration
* DROPPED command:
* cytune: Upstream decided to remove tool untested for years
that supports this old hardware.
- Dropped patches included in the upstream:
(*git) Included with no changes
(+git) Included with improvements
(!git) Included with differences
* support-other-tty-lines-not-vconsole.patch (*b9c7390)
* agetty-fooled-on-serial-line-due-plymouth.patch,
* sulogin-fooled-on-tty-line-due-plymouth.patch (*bb280f7)
* agetty-on-s390-on-dev-3270-tty1-line.patch (*f2bcda5)
* sulogin-does-not-find-any-console.patch (*624b204)
* util-linux-setarch-uname26.patch (*f6eb160)
* util-linux-ng-2.16-squashfs3-detect.patch (*11402f5)
* util-linux-lscpu-improve-hypervisor-detection.patch
(!b774473, b32488c, 5bd31c6, 0f0c558, 96ce475)
WARNING, INCOMPATIBLE CHANGE: "lscpu -p" no more reports
hypervisor, as it breaks standard behavior. Use standard output
instead! (FATE#310255)
* blkid-stop-scanning-on-I-O-error.patch (+296d96e)
* blkid-convert-superblocks-to-new-calling-convention.patch
(+37f4060)
* util-linux-libblkid-ext-probe.patch (*a1ca32f)
* util-linux-hwclock-drift-check.patch (*f196fd1)
* util-linux-hwclock-adjtime-check.patch (*db8fc5f)
- Dropped obsolete patch:
* util-linux-2.23.1-eject-fpie.patch (eject is no more SUID)
* util-linux-2.24-fdisk_remove_bogus_warnings.patch
(upstream fixed it in a different way)
* util-linux-HACK-boot.localfs.diff
(MOUNT_PRINT_SOURCE is no more referenced)
- Ported and renamed:
* util-linux-2.23.1-noenc-suse.diff
-> util-linux-noenc-suse.patch
- Split spec file to three stages:
* util-linux.spec: Everything that do not need python or systemd.
* util-linux-systemd.spec: Stuff that needs systemd:
util-linux-systemd and uuidd
NOTE: Not building systemd-less variants of utilities.
* python-libmount.spec: Just python-libmount
- Move bash-completion files to correct packages.
- Add patch util-linux-bash-completion-blockdev.patch.
- Add hacks to prevent damaging of spec files by format_spec_file
(bnc#891152, also edited util-linux-rpmlintrc).
- use nologin from upstream (was added in 2.24)
OBS-URL: https://build.opensuse.org/request/show/244468
OBS-URL: https://build.opensuse.org/package/show/Base:System/util-linux?expand=0&rev=248
2014-08-21 11:54:57 +02:00
%endif
%if %build_python_libmount
%if %build_util_linux
%files -n python-libmount
%else
%files
%endif
%defattr (-, root, root)
%{python_sitearch} /libmount
%endif
%changelog