Updates SUSE Edge 3.2 branch with updated Kiwi image builder base

In December 2024, the upstream Kiwi team dropped the md5 checksum for generated
images and went with sha256, for good reason:

d4d39e481a

These changes have recently been reflected in updated `dracut-kiwi-oem-repart`
and `dracut-kiwi-oem-dump` Dracut modules, bumping to a 10.2 codebase, which
expect the sha256 checksum to be available at install time on SelfInstall ISO
images. However, in the current branch of the Kiwi builder, we use 10.1, which
generates md5 checksums, resulting in an error at deployment time as the Dracut
modules cannot find the sha256 checksum file.

NOTE: This is being put into the 3.2 branch *only* right now, as it relies on
Micro 6.0; the Kiwi changes have not yet permeated into Micro 6.1, so we'll
need to forward-port this into 3.3 when 6.1 has the new modules. Micro 6.1
images can still be built successfully on the Kiwi 10.1 branches with md5.

_config

@@ -103,36 +103,6 @@ BuildFlags: onlybuild:release-manifest-image
     PublishFlags: archsync
 %endif
 
-%if "%_repository" == "images_6.0"
-    Prefer: container:sles15-image
-    Type: docker
-    BuildEngine: podman
-    Repotype: none
-    Patterntype: none
-    BuildFlags: dockerarg:SLE_VERSION=16.0
-    BuildFlags: onlybuild:kiwi-builder-image
-
-    # Publish multi-arch container images only once all archs have been built
-    PublishFlags: archsync
-
-    # Exclude the images selected by the aarch64 section
-    %ifarch aarch64
-      BuildFlags: excludebuild:baremetal-operator-image
-      BuildFlags: excludebuild:edge-image-builder-image
-      BuildFlags: excludebuild:endpoint-copier-operator-image
-      BuildFlags: excludebuild:ironic-image
-      BuildFlags: excludebuild:ironic-ipa-downloader-image
-      BuildFlags: excludebuild:kube-rbac-proxy-image
-      BuildFlags: excludebuild:metallb-controller-image
-      BuildFlags: excludebuild:metallb-speaker-image
-    %endif
-
-%else
-    BuildFlags: excludebuild:kiwi-builder-image
-%endif
-
-
-
 %if "%_repository" == "charts" || "%_repository" == "phantomcharts" || "%_repository" == "releasecharts"
     Type: helm
     Repotype: helm

_meta

@@ -31,19 +31,14 @@
     <arch>x86_64</arch>
   </repository>
 {%- endif %}
-{%- for repository in ["images", "images_6.0", "test_manifest_images"] %}
+{%- for repository in ["images", "test_manifest_images"] %}
   <repository name="{{ repository }}">
-    {%- if release_project is defined and repository != "test_manifest_images" %}
+    {%- if release_project is defined and repository == "images" %}
     <releasetarget project="{{ release_project }}" repository="images" trigger="manual"/>
     {%- endif %}
     <path project="SUSE:Registry" repository="standard"/>
-    {%- if repository == "images_6.0" %}
-      <path project="SUSE:CA" repository="16.0"/>
-      <path project="SUSE:ALP:Products:Marble:6.0" repository="standard"/>
-    {%- else %}
     <path project="SUSE:CA" repository="SLE_15_SP6"/>
     <path project="{{ project }}" repository="standard"/>
-    {%- endif %}
     <arch>x86_64</arch>
     <arch>aarch64</arch>
   </repository>

edge-image-builder-image/Dockerfile

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.1.2-rc1
+#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.1.0.1
-#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.1.2-rc1-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.1.0.1-%RELEASE%
 #!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-base:$SLE_VERSION
@@ -15,11 +15,11 @@ RUN zypper --non-interactive install --no-recommends edge-image-builder qemu-x86
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE edge-image-builder Container Image"
 LABEL org.opencontainers.image.description="edge-image-builder based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="1.1.2-rc1"
+LABEL org.opencontainers.image.version="1.1.0.1"
 LABEL org.opencontainers.image.url="https://www.suse.com/products/server/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%edge-image-builder:1.1.2-rc1-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%edge-image-builder:1.1.0.1-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"

edge-image-builder/_service

@@ -1,13 +1,10 @@
 <services>
   <service name="obs_scm">
     <param name="url">https://github.com/suse-edge/edge-image-builder.git</param>
+    <param name="versionformat">@PARENT_TAG@</param>
     <param name="scm">git</param>
     <param name="exclude">.git</param>
-    <param name="revision">v1.1.2-rc1</param>
+    <param name="revision">v1.1.0</param>
-    <!-- Uncomment and set this For Pre-Release Version -->
-    <param name="version">1.1.2~rc0</param>
-    <!-- Uncomment and this for regular version -->
-    <!-- <param name="versionformat">@PARENT_TAG@</param> -->
     <param name="versionrewrite-pattern">v(\d+).(\d+).(\d+)</param>
     <param name="versionrewrite-replacement">\1.\2.\3</param>
     <param name="changesgenerate">enable</param>

edge-image-builder/edge-image-builder.spec

@@ -17,7 +17,7 @@
 
 
 Name:           edge-image-builder
-Version:        1.1.2~rc1
+Version:        1.1.0
 Release:        0
 Summary:        Edge Image Builder
 License:        Apache-2.0

kiwi-builder-image/Dockerfile

@@ -1,20 +1,18 @@
-#!BuildTag: %%IMG_PREFIX%%kiwi-builder:%%kiwi_version%%.1-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%kiwi-builder:10.2.12.0
-#!BuildTag: %%IMG_PREFIX%%kiwi-builder:%%kiwi_version%%.1
+#!BuildTag: %%IMG_PREFIX%%kiwi-builder:10.2.12.0-%RELEASE%
-
+FROM registry.suse.com/bci/kiwi:10.2.12
-ARG KIWIVERSION="10.2.12"
+MAINTAINER SUSE LLC (https://www.suse.com/)
-FROM registry.suse.com/bci/kiwi:${KIWIVERSION}
-ARG KIWIVERSION
 
 # Define labels according to https://en.opensuse.org/Building_derived_containers
 # labelprefix=com.suse.application.akri
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE Kiwi Builder Container Image"
 LABEL org.opencontainers.image.description="kiwi-builder based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="%%kiwi_version%%"
+LABEL org.opencontainers.image.version="%PACKAGE_VERSION%"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%kiwi-builder:%%kiwi_version%%.1-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%kiwi-builder:10.2.12.0"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"
@@ -23,8 +21,8 @@ LABEL com.suse.image-type="application"
 LABEL com.suse.release-stage="released"
 # endlabelprefix
 
-# help the build service understand the need for python3-kiwi
+# Configure Kiwi to use kpartx
-RUN zypper -n install -d -D python3-kiwi; [ "%%kiwi_version%%" = "${KIWIVERSION}" ] || { echo "expected kiwi version ${KIWIVERSION}: version mismatch"; exit 1; }
+RUN echo -e "mapper:\n  - part_mapper: kpartx" > /etc/kiwi.yml
 
 # Copy build script into image and make it executable
 ADD build-image.sh /usr/bin/build-image

kiwi-builder-image/README

@@ -8,7 +8,7 @@ Please ensure that you're running this on a registered SLE Micro 6.0 system, and
 
 Next, download the podman image:
 
-# podman pull %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1
+# podman pull %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10.2.12.0
 
 Make a local output directory (where the images will reside):
 
@@ -16,40 +16,40 @@ Make a local output directory (where the images will reside):
 
 Then, to build a standard "Base" image, run the following in podman:
 
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10.2.12.0 build-image
 
 To build a "Base" SelfInstall ISO, you can add additional flags, for example:
 
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image -p Base-SelfInstall
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10.2.12.0 build-image -p Base-SelfInstall
 
 Then, to build a standard "Default" image, run the following in podman:
 
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image -p Default
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10.2.12.0 build-image -p Default
 
 To build a "Default" SelfInstall ISO, you can add additional flags, for example:
 
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image -p Default-SelfInstall
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10.2.12.0 build-image -p Default-SelfInstall
 
 To build an image with a RealTime kernel, e.g. a RAW disk image ("Default"), use the following:
 
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image -p Base-RT
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10.2.12.0 build-image -p Base-RT
 
 To build an image that supports a large block/sectorsize (4096), use the "-b" flag, for example:
 
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image -p Default-SelfInstall -b
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10.2.12.0 build-image -p Default-SelfInstall -b
 
 # mkdir mydefs/
 # cp /path/to/SL-Micro.kiwi mydefs/
 # cp /path/to/config.sh mydefs/
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -v ./mydefs/:/micro-sdk/defs/ -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -v ./mydefs/:/micro-sdk/defs/ -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10.2.12.0 build-image
 
 All output will be in the local $(pwd)/output directory, for example:
 
 # ls -1 output/
-SL-Micro.x86_64-6.0.changes
+SLE-Micro.x86_64-6.0.changes
-SL-Micro.x86_64-6.0.packages
+SLE-Micro.x86_64-6.0.packages
-SL-Micro.x86_64-6.0.raw
+SLE-Micro.x86_64-6.0.raw
-SL-Micro.x86_64-6.0.verified
+SLE-Micro.x86_64-6.0.verified
 build
 kiwi.result
 kiwi.result.json

kiwi-builder-image/_service

@@ -16,14 +16,4 @@
     <param name="eval">SUPPORT_LEVEL=$(rpm --macros=/root/.rpmmacros -E %support_level)</param>
     <param name="var">SUPPORT_LEVEL</param>
   </service>
-  <service mode="buildtime" name="replace_using_package_version">
-    <param name="file">Dockerfile</param>
-    <param name="regex">%%kiwi_version%%</param>
-    <param name="package">python3-kiwi</param>
-  </service>
-  <service mode="buildtime" name="replace_using_package_version">
-    <param name="file">README</param>
-    <param name="regex">%%kiwi_version%%</param>
-    <param name="package">python3-kiwi</param>
-  </service>
 </services>

release-manifest-image/Dockerfile

@@ -1,4 +1,4 @@
-#!BuildTag: %%IMG_PREFIX%%release-manifest:3.2.2
+#!BuildTag: %%IMG_PREFIX%%release-manifest:3.2.1
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION
 
@@ -7,11 +7,11 @@ FROM registry.suse.com/bci/bci-micro:$SLE_VERSION
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SUSE Edge Release Manifest"
 LABEL org.opencontainers.image.description="Release Manifest containing information about a specific SUSE Edge release"
-LABEL org.opencontainers.image.version="3.2.2"
+LABEL org.opencontainers.image.version="3.2.1"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%release-manifest:3.2.2"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%release-manifest:3.2.1"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"

release-manifest-image/release_manifest.yaml

@@ -1,9 +1,9 @@
 apiVersion: lifecycle.suse.com/v1alpha1
 kind: ReleaseManifest
 metadata:
-  name: release-manifest-3-2-2
+  name: release-manifest-3-2-1
 spec:
-  releaseVersion: 3.2.2
+  releaseVersion: 3.2.1
   components:
     kubernetes:
       k3s: