Update SR-IOV chart to v1.4.0

Aligning with https://github.com/suse-edge/charts/pull/167

.gitea/workflows/check_manifest.yaml

@@ -1,23 +0,0 @@
-name: Check Release Manifest Local Charts Versions
-on:
-  pull_request:
-      branches-ignore:
-      - "devel"
-
-
-jobs:
-  sync-pr-project:
-    name: "Check Release Manifest Local Charts Versions"
-    runs-on: tumbleweed
-    steps:
-        # Waiting on PR to get merged for support in upstream action/checkout action
-      - uses: 'https://github.com/yangskyboxlabs/action-checkout@sha256'
-        name: Checkout repository
-        with:
-          object-format: 'sha256'
-      - name: Setup dependencies
-        run: |
-          zypper in -y python3-ruamel.yaml
-      - name: Check release manifest
-        run: |
-          python3 .obs/manifest-check.py --check

.gitea/workflows/pr_project.yaml

@@ -1,62 +0,0 @@
-name: Build PR in OBS
-on:
-  pull_request_target:
-    types:
-      - opened
-      - reopened
-      - synchronize
-      - closed
-    branches-ignore:
-      - "devel"
-
-concurrency:
-  group: ${{ gitea.workflow }}-${{ gitea.ref }}
-  cancel-in-progress: true
-
-jobs:
-  sync-pr-project:
-    name: "Build PR in OBS"
-    runs-on: tumbleweed
-    steps:
-      - name: Setup OSC
-        run: |
-          zypper in -y python3-jinja2
-          mkdir -p ~/.config/osc
-          cat >~/.config/osc/oscrc <<'EOF'
-          [general]
-          apiurl = https://api.opensuse.org
-
-          [https://api.opensuse.org]
-          user=${{ vars.OBS_USERNAME }}
-          pass=${{ secrets.OBS_PASSWORD }}
-          EOF
-    # Waiting on PR to get merged for support in upstream action/checkout action
-      - uses: 'https://github.com/yangskyboxlabs/action-checkout@sha256'
-        name: Checkout repository
-        with:
-          object-format: 'sha256'
-      - name: "[if PR is closed] Delete project in OBS"
-        run: |
-          if [ "${{ gitea.event.action }}" = "closed" ]; then
-          PROJECT="$(grep PROJECT .obs/common.py | sed 's/PROJECT = "\(.*\)"/\1/')"
-          osc rdelete -f -r -m "PR closed" "${PROJECT}:Staging:PR-${{ gitea.event.number }}"
-          fi
-      - name: "Setup PR project in OBS"
-        env:
-          SCM_URL: ${{ gitea.event.pull_request.head.repo.clone_url }}#${{ gitea.head_ref }}
-        run: |
-          if [ "${{ gitea.event.action }}" != "closed" ]; then
-          PROJECT="$(grep PROJECT .obs/common.py | sed 's/PROJECT = "\(.*\)"/\1/')"
-          python3 .obs/render_meta.py --pr ${{ gitea.event.number }} --scm-url "${SCM_URL}" | osc meta prj "${PROJECT}:Staging:PR-${{ gitea.event.number }}" -F -
-          echo "Project created ${PROJECT}:Staging:PR-${{ gitea.event.number }}"
-          echo "Follow build at: https://build.opensuse.org/project/monitor/${PROJECT}:Staging:PR-${{ gitea.event.number }}"
-          fi
-      - env:
-          GIT_SHA: ${{ gitea.event.pull_request.head.sha }}
-        name: "Wait for OBS to build the project"
-        run: |
-          if [ "${{ gitea.event.action }}" != "closed" ]; then
-          PROJECT="$(grep PROJECT .obs/common.py | sed 's/PROJECT = "\(.*\)"/\1/')"
-          export OBS_PROJECT="${PROJECT}:Staging:PR-${{ gitea.event.number }}"
-          python3 .obs/wait_obs.py
-          fi

.gitea/workflows/sync_config.yaml

@@ -1,35 +0,0 @@
-name: Synchronize Project Config
-on:
-  push:
-    branches-ignore:
-      - "devel"
-    paths:
-      - "_config"
-      - ".gitea/workflows/sync_config.yaml"
-
-jobs:
-  sync-prjconf:
-    name: "Update prjconf in OBS"
-    runs-on: tumbleweed
-    steps:
-      - name: Setup OSC
-        run: |
-          mkdir -p ~/.config/osc
-          cat >~/.config/osc/oscrc <<'EOF'
-          [general]
-          apiurl = https://api.opensuse.org
-
-          [https://api.opensuse.org]
-          user=${{ vars.OBS_USERNAME }}
-          pass=${{ secrets.OBS_PASSWORD }}
-          EOF
-    # Waiting on PR to get merged for support in upstream action/checkout action
-      - uses: 'https://github.com/yangskyboxlabs/action-checkout@sha256'
-        name: Checkout repository
-        with:
-          object-format: 'sha256'
-      - run: |
-          PROJECT="$(grep PROJECT .obs/common.py | sed 's/PROJECT = "\(.*\)"/\1/')"
-          if [ "$(osc meta prjconf "${PROJECT}" | sha256sum)" != "$(cat _config | sha256sum)" ] ; then
-            osc meta prjconf "${PROJECT}" -F _config
-          fi

.gitea/workflows/sync_meta.yaml

@@ -1,45 +0,0 @@
-name: Synchronize Project Metadata
-on:
-  push:
-    branches-ignore:
-      - "devel"
-    paths:
-      - "*" # Will trigger on new directories and changes to files in root of repository
-      - ".gitea/workflows/sync_meta.yaml"
-      - ".obs/common.py"
-
-jobs:
-  sync-prj-meta:
-    runs-on: tumbleweed
-    steps:
-      - name: Setup OSC
-        run: |
-          zypper in -y python3-jinja2
-          mkdir -p ~/.config/osc
-          cat >~/.config/osc/oscrc <<'EOF'
-          [general]
-          apiurl = https://api.opensuse.org
-
-          [https://api.opensuse.org]
-          user=${{ vars.OBS_USERNAME }}
-          pass=${{ secrets.OBS_PASSWORD }}
-          EOF
-    # Waiting on PR to get merged for support in upstream action/checkout action
-      - uses: 'https://github.com/yangskyboxlabs/action-checkout@sha256'
-        name: Checkout repository
-        with:
-          object-format: 'sha256'
-      - name: "Update or create OBS Project"
-        run: |
-          PROJECT="$(grep PROJECT .obs/common.py | sed 's/PROJECT = "\(.*\)"/\1/')"
-          set -o pipefail
-          if meta="$(osc meta prj "${PROJECT}" 2>/dev/null | sha256sum)"; then
-            new_meta="$(python3 .obs/render_meta.py)"
-            if [ "${meta}" != "$(echo "${new_meta}" | sha256sum)" ]; then
-              echo "${new_meta}" | osc meta prj "${PROJECT}" -F -
-            fi
-            python3 .obs/sync_packages.py
-          else
-            # Create the projects
-            bash .obs/create_projects.sh
-          fi

.obs/add_package.py

@@ -1,4 +1,5 @@
 #!/usr/bin/env python3
+import yaml
 import subprocess
 import argparse
 import os
@@ -6,6 +7,30 @@ import os.path
 
 from common import PROJECT, REPOSITORY, BRANCH
 
+def add_package_to_workflow(name: str):
+    modified = False
+    with open(".obs/workflows.yml", "r") as wf_file:
+        workflows = yaml.safe_load(wf_file)
+    if not any(
+        x
+        for x in workflows["staging_build"]["steps"]
+        if x["branch_package"]["source_package"] == name
+    ):
+        workflows["staging_build"]["steps"].append(
+            {
+                "branch_package": {
+                    "source_project": PROJECT,
+                    "target_project": f"{PROJECT}:Staging",
+                    "source_package": name,
+                }
+            }
+        )
+        modified = True
+    if modified:
+        with open(".obs/workflows.yml", "w") as wf_file:
+            yaml.dump(workflows, wf_file)
+
+
 def add_package_to_project(name: str):
     package_meta = f"""<package name="{name}" project="{PROJECT}">
   <title/>
@@ -28,6 +53,7 @@ def add_package(package_name: str):
         os.exit(1)
 
     add_package_to_project(package_name)
+    add_package_to_workflow(package_name)
 
 
 def main():
@@ -39,7 +65,7 @@ def main():
     add_package(args.package)
     
 
-    print("Package created in OBS !")
+    print("Package created in OBS, you can now push the modified workflow file")
 
 
 if __name__ == '__main__':

.obs/common.py

@@ -1,3 +1,3 @@
-PROJECT = "isv:SUSE:Edge:3.2"
+PROJECT = "isv:SUSE:Edge:Factory"
 REPOSITORY = "https://src.opensuse.org/suse-edge/Factory"
-BRANCH = "3.2"
+BRANCH = "main"

.obs/create_projects.sh

@@ -1,37 +0,0 @@
-#!/bin/bash
-
-show_help() {
-    echo "Usage: $(basename $0) [--internal]"
-    echo "options:"
-    echo "-h, --help       display this help and exit"
-    echo "-i, --internal   create project as internal"
-    exit 0
-}
-
-while [[ "$#" -gt 0 ]]; do
-    case $1 in
-        -h|--help) show_help;;
-        -i|--internal) internal="--internal" ;;
-        *) echo "Unknown parameter passed: $1";show_help ;;
-    esac
-    shift
-done
-
-PROJECT="$(grep PROJECT .obs/common.py | sed 's/PROJECT = "\(.*\)"/\1/')"
-EXTRA_OSC_ARGS=""
-if [ -n "$internal" ]; then
-    PROJECT="ISV${PROJECT:3}"
-    EXTRA_OSC_ARGS="-A https://api.suse.de"
-
-    python3 .obs/render_meta.py ${internal} Snapshot | osc ${EXTRA_OSC_ARGS} meta prj "${PROJECT}:Snapshot" -F -
-    osc ${EXTRA_OSC_ARGS} meta prjconf "${PROJECT}:Snapshot" -F _config
-fi
-
-python3 .obs/render_meta.py ${internal} ToTest | osc ${EXTRA_OSC_ARGS} meta prj "${PROJECT}:ToTest" -F -
-python3 .obs/render_meta.py ${internal} | osc ${EXTRA_OSC_ARGS} meta prj "${PROJECT}" -F -
-osc ${EXTRA_OSC_ARGS} meta prjconf "${PROJECT}:ToTest" -F _config
-osc ${EXTRA_OSC_ARGS} meta prjconf "${PROJECT}" -F _config
-
-if [ -z "$internal" ]; then
-    python3 .obs/sync_packages.py
-fi

.obs/delete_package.py

@@ -1,4 +1,5 @@
 #!/usr/bin/env python3
+import yaml
 import subprocess
 import argparse
 import os
@@ -7,6 +8,18 @@ import os.path
 from common import PROJECT
 
 
+def delete_package_from_workflow(name: str):
+    with open(".obs/workflows.yml", "r") as wf_file:
+        workflows = yaml.safe_load(wf_file)
+    workflows["staging_build"]["steps"] = [
+        x
+        for x in workflows["staging_build"]["steps"]
+        if x["branch_package"]["source_package"] != name
+    ]
+    with open(".obs/workflows.yml", "w") as wf_file:
+        yaml.dump(workflows, wf_file)
+
+
 def delete_package_from_project(name: str):
     p = subprocess.run(["osc", "rdelete", PROJECT, name, "-m \"Deleted via delete_package.py\"" ], stdout=subprocess.PIPE)
     print(p.stdout)
@@ -20,6 +33,7 @@ def delete_package(package_name: str):
         os.exit(1)
 
     delete_package_from_project(package_name)
+    delete_package_from_workflow(package_name)
 
 
 def main():

.obs/manifest-check.py

@@ -1,84 +0,0 @@
-#!/usr/bin/python3
-
-import ruamel.yaml
-import pathlib
-import argparse
-import sys
-
-yaml = ruamel.yaml.YAML()
-
-def get_chart_version(chart_name: str) -> str:
-    with open(f"./{chart_name}/Chart.yaml") as f:
-        chart = yaml.load(f)
-        return chart["version"]
-
-def get_charts(chart):
-    if not chart["chart"].startswith("%%CHART_REPO%%"):
-        # Not a locally managed chart
-        return {}
-
-    chart_name = chart["chart"][len("%%CHART_REPO%%/%%IMG_PREFIX%%"):]
-    charts = { chart_name: chart["version"] }
-    for child_chart in chart.get("dependencyCharts", []) + chart.get("addonCharts", []):
-        charts.update(get_charts(child_chart))
-    return charts
-
-def get_charts_list():
-    with open("./release-manifest-image/release_manifest.yaml") as f:
-        manifest = yaml.load(f)
-    charts = {}
-    for chart in manifest["spec"]["components"]["workloads"]["helm"]:
-        charts.update(get_charts(chart))
-    return charts
-
-def check_charts(fix: bool) -> bool:
-    success = True
-    charts = get_charts_list()
-    to_fix = {}
-    for chart in charts:
-        expected_version = get_chart_version(chart)
-        if expected_version != charts[chart]:
-            success = False
-            to_fix[f'%%CHART_REPO%%/%%IMG_PREFIX%%{chart}'] = expected_version
-            print(f"{chart}: Expected: {expected_version}, Got: {charts[chart]}")
-    if fix and not success:
-        fix_charts(to_fix)
-        return True
-    return success
-
-def fix_charts(to_fix):
-    manifest_path = pathlib.Path("./release-manifest-image/release_manifest.yaml")
-    manifest = yaml.load(manifest_path)
-    yaml.indent(mapping=2, sequence=4, offset=2)
-    yaml.width = 4096
-    for chart_index, chart in enumerate(manifest["spec"]["components"]["workloads"]["helm"]):
-        changed = False
-        if chart["chart"] in to_fix.keys():
-            changed = True
-            chart["version"] = to_fix[chart["chart"]]
-        for subchart_index, subchart in enumerate(chart.get("addonCharts", [])):
-            if subchart["chart"] in to_fix.keys():
-                changed = True
-                subchart["version"] = to_fix[subchart["chart"]]
-                chart["addonCharts"][subchart_index] = subchart
-        for subchart_index, subchart in enumerate(chart.get("dependencyCharts", [])):
-            if subchart["chart"] in to_fix.keys():
-                changed = True
-                subchart["version"] = to_fix[subchart["chart"]]
-                chart["dependencyCharts"][subchart_index] = subchart
-        if changed:
-            manifest["spec"]["components"]["workloads"]["helm"][chart_index] = chart
-    yaml.dump(manifest, manifest_path)
-
-def main():
-    print("Checking charts versions in release manifest")
-    parser = argparse.ArgumentParser()
-    parser.add_argument('-c', '--check', action='store_true')
-    args = parser.parse_args()
-    if not check_charts(not args.check):
-        sys.exit(1)
-    else:
-        print("All local charts in release manifest are using the right version")
-
-if __name__ == "__main__":
-    main()

.obs/render_meta.py

@@ -1,62 +0,0 @@
-import argparse
-
-from jinja2 import Template
-from common import PROJECT
-
-def render(base_project, subproject, internal, scm_url=None):
-    version = base_project.rsplit(':', 1)[-1]
-    context = {
-        "base_project": subproject == "",
-        "title": f"SUSE Edge {version} {subproject}".rstrip(),
-    }
-    if subproject == "ToTest":
-        context["project"] = f"{base_project}:ToTest"
-        context["description"] = (
-            f"This project doesn't build, it stores a snapshot of SUSE Edge {version} "
-            "project currently going through the automated test layer"
-        )
-        if "Factory" in base_project or internal:
-            context["release_project"] = f"{base_project}:Snapshot"
-    elif subproject == "Snapshot":
-        context["project"] = f"{base_project}:Snapshot"
-        context["release_project"] = f"{base_project.rsplit(':', 1)[0]}:Containers"
-        context["for_release"] = True
-        context["description"] = (
-            f"This project doesn't build, it stores a snapshot of SUSE Edge {version} "
-            "project that passed automated test layer"
-        )
-    elif subproject == "":
-        context["project"] = base_project
-        context["release_project"] = f"{base_project}:ToTest"
-    else: # PR case direct python call
-        context["base_project"] = True
-        context["project"] = f"{base_project}:{subproject}"
-        if scm_url is not None:
-            context["scm_url"] = scm_url
-
-    with open("_meta") as meta:
-        template = Template(meta.read())
-    return template.render(context)
-
-def main():
-    parser = argparse.ArgumentParser(
-                    prog='ProgramName',
-                    description='What the program does',
-                    epilog='Text at the bottom of help')
-    parser.add_argument("subproject", default="", choices=["", "ToTest", "Snapshot"], nargs="?")
-    parser.add_argument("--internal", action="store_true")
-    parser.add_argument("--pr")
-    parser.add_argument("--scm-url")
-    args = parser.parse_args()
-    base_project = PROJECT.replace("isv", "ISV", 1) if args.internal else PROJECT
-
-    print(render(
-        base_project=base_project,
-        subproject=args.subproject if args.pr is None else f"Staging:PR-{args.pr}",
-        internal=args.internal,
-        scm_url=args.scm_url,
-    ))
-
-
-if __name__ == "__main__":
-    main()

.obs/sync_packages.py

@@ -9,7 +9,7 @@ from common import PROJECT
 
 def get_obs_packages() -> Set[str]:
     packages = subprocess.run(["osc", "ls", PROJECT], encoding='utf-8' , capture_output=True)
-    return { p for p in packages.stdout.splitlines() if ":" not in p }
+    return set(packages.stdout.splitlines())
 
 def get_local_packages() -> Set[str]:
     p = pathlib.Path('.')

.obs/wait_obs.py

@@ -1,83 +0,0 @@
-import xml.etree.ElementTree as ET
-import subprocess
-import time
-import os
-import sys
-
-from collections import Counter
-
-def get_buildstatus(project: str) -> ET.Element:
-    for _ in range(5):
-        try:
-            output = subprocess.check_output(["osc", "pr", "--xml", project])
-            return ET.fromstring(output)
-        except subprocess.CalledProcessError:
-            continue
-    print("Failed to get buildstatus from OBS")
-
-def do_wait(project:str, commit:str) -> ET.Element:
-    last_state = None
-    while True:
-        time.sleep(5)
-        status = get_buildstatus(project)
-        if last_state == status.get("state"):
-            continue
-        else:
-            last_state = status.get("state")
-
-        scminfo = { e.text for e in status.findall(".//scminfo") }
-        if len(scminfo) != 1 or scminfo.pop() != commit:
-            print("Waiting for OBS to sync with SCM")
-            continue
-
-        if not all([ e.get('state') == "published" and e.get('dirty') is None for e in status.findall("./result")]):
-            print("Waiting for OBS to finish building")
-            continue
-
-        return status
-        
-def print_results(status: ET.Element) -> bool:
-    results = {}
-    failed = []
-    for e in status.findall("./result"):
-        repo = results.get(e.get("repository"), {})
-        repo[e.get("arch")] = e
-        results[e.get("repository")] = repo
-    
-    for repo in results.keys():
-        print(f"{repo}:")
-        depth=1
-        for arch in results[repo].keys():
-            counts = Counter()
-            if repo != "charts":
-                print(f"\t{arch}:")
-                depth=2
-            for package in results[repo][arch].findall("./status"):
-                if package.get("code") in ["excluded", "disabled"]:
-                    continue
-                if package.get("code") in ["failed", "unresolvable", "broken"]:
-                    details = package.findtext("details")
-                    if details:
-                        failed.append(f"{package.get('package')} ({arch}): {details}")
-                    else:
-                        failed.append(f"{package.get('package')} ({arch})")
-                counts[package.get("code")] += 1
-            for (code, count) in counts.items():
-                print("\t"*depth, f"{code}: {count}")
-    
-    failed.sort()
-    if failed:
-        print("\nPackages failing: ")
-    for fail in failed:
-        print("\t", fail)
-    return len(failed)
-
-def main():
-    project = os.environ.get("OBS_PROJECT")
-    sha = os.environ.get("GIT_SHA")
-    print(f"Waiting for OBS to build {project} for commit {sha}")
-    status = do_wait(project, sha)
-    sys.exit(print_results(status))
-
-if __name__ == "__main__":
-    main()

.obs/workflows.yml

@@ -0,0 +1,212 @@
+staging_build:
+  filters:
+    event: pull_request
+  steps:
+  - branch_package:
+      source_package: endpoint-copier-operator
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: endpoint-copier-operator-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: endpoint-copier-operator-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: akri
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: akri-agent-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: akri-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: akri-controller-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: akri-dashboard-extension-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: akri-debug-echo-discovery-handler-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: akri-onvif-discovery-handler-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: akri-opcua-discovery-handler-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: akri-udev-discovery-handler-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: akri-webhook-configuration-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: obs-service-set_version
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: cosign
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: frr-k8s
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: kubectl
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: upgrade-controller
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: nm-configurator
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: kube-rbac-proxy
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: edge-image-builder
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: metallb
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: hauler
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: ip-address-manager
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: baremetal-operator
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: cluster-api-provider-metal3
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: cdi-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: cluster-api-provider-metal3-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: metallb-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: sriov-crd-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: upgrade-controller-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: edge-image-builder-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: ironic-ipa-downloader-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: upgrade-controller-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: metal3-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: baremetal-operator-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: sriov-network-operator-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: metallb-controller-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: ip-address-manager-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: metallb-speaker-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: ironic-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: cri-tools
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: crudini
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: fakeroot
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: ipcalc
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: autoconf
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: rancher-turtles-airgap-resources-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: rancher-turtles-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: kube-rbac-proxy-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: ironic-ipa-ramdisk
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: kubevirt-dashboard-extension-chart
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging
+  - branch_package:
+      source_package: kiwi-builder-image
+      source_project: isv:SUSE:Edge:Factory
+      target_project: isv:SUSE:Edge:Factory:Staging

.pre-commit-config.yaml

@@ -1,10 +0,0 @@
-repos:
-  - repo: local
-    hooks:
-      - id: check-manifest
-        name: "Check release-manifest"
-        entry: python3 .obs/manifest-check.py
-        language: python
-        additional_dependencies: ['ruamel.yaml']
-        pass_filenames: false
-        always_run: true

README.md

@@ -5,6 +5,15 @@ Contains the definition of the packages built on OBS for the SUSE Edge Solution
 This repository is linked to an OBS project: <https://build.opensuse.org/project/show/isv:SUSE:Edge:Factory>
 Every directory in this repository represents a package in that OBS project, those should be synced automatically from this repository.
 
+## Adding a package
+
+To add a package, first create a directory with your package as you intend it in OBS.
+
+Then run the `.obs/add_package.py` script to create the package in the OBS project and add the required elements to the synchronization workflow.
+This script is using the `osc` command behind the scenes, so ensure you have it installed and correctly configured, as well as you have the correct permissions to create a new package in the project.
+
+You will then get asked to push your changes.
+
 ## Testing a fork or a development branch
 
 You can create a project in your home space in OBS, use the same prjconf as the one of "isv:SUSE:Edge:Factory", and copy the repositories part of the metadata (adjust self references).
@@ -14,14 +23,16 @@ Then add a scmsync stanza to your metadata like this (adjust repository path and
 <scmsync>https://src.opensuse.org/suse-edge/Factory#main</scmsync>
 ```
 
-This is done automatically for any PR filed against this repository.
-
 ## Cutting a release version branch
 
 1. Do the appropriate git branch command
 2. Change the project path in `.obs/common.py` file (e.g. from `isv:SUSE:Edge:Factory` to `isv:SUSE:Edge:3.2`)
 3. Change the branch reference in `.obs/common.py` file (e.g. from `main` to `3.2`)
+4. Edit the `.obs/workflows.yml` file to change the references to the correct projects
 5. Commit those changes to the new branch and push the new branch
+6. Create the base and to-test projects (e.g. `isv:SUSE:Edge:3.2` and `isv:SUSE:Edge:3.2:ToTest`), use the `isv:SUSE:Edge:Factory` projects as example for metadata part
+7. Use the prjconf of Factory in all those projects
+8. Run the `.obs/sync_packages.py` script to create all the packages in the base project
 9. Go take a few cups of coffee/tea/mate/... while waiting for OBS to build everything
 10. Once built do an `osc release` of the project for it to be copied over in the `ToTest` section
 11. Hand over to QA to test whatever is in `ToTest`. (You can continue to work on the base branch if needed meanwhile)

_config

@@ -1,155 +0,0 @@
-Prefer: -libqpid-proton10 -python311-urllib3_1
-
-Macros:
-%__python3 /usr/bin/python3.11
-%registry_url %(echo %{vendor} | cut -d '/' -f 3 | sed 's/build/registry/')
-:Macros
-
-%if "%{sub %{lower %_project} 1 14}" != "isv:suse:edge:" || "%{sub %_project 15 21}" == "Factory"
-    # Here we are in Factory like project so set chart major version to 999
-Macros:
-%chart_major 999
-:Macros
-%else
-    # Here we are in version branch, so set the image prefix and chart major accordingly
-Macros:
-%project_branch %(echo %{_project} | cut -d ':' -f 4)
-%img_prefix %{project_branch}/
-%chart_major %(echo %{project_branch} | awk '{split($1,a,"."); print a[1]*100 + a[2]}')
-:Macros
-%endif
-
-%if %{sub %_project 1 3} == ISV
-Macros:
-%img_repo registry.suse.com/edge
-%chart_repo oci://registry.suse.com/edge
-%manifest_repo registry.suse.com/edge
-%support_level l3
-:Macros
-%else
-Macros:
-%img_repo registry.opensuse.org/isv/suse/edge/containers/images
-%manifest_repo registry.opensuse.org/isv/suse/edge/containers/images
-%chart_repo oci://registry.opensuse.org/isv/suse/edge/containers/charts
-%support_level techpreview
-:Macros
-%endif
-
-%if "%_repository" == "charts" || "%_repository" == "test_manifest_images"
-Macros:
-%img_repo %(echo %{registry_url}:%{_project}:images | tr ":" "/" | tr '[:upper:]' '[:lower:]')
-%manifest_repo %(echo %{registry_url}:%{_project}:test_manifest_images | tr ":" "/" | tr '[:upper:]' '[:lower:]')
-%chart_repo oci://%(echo %{registry_url}:%{_project}:charts | tr ":" "/" | tr '[:upper:]' '[:lower:]')
-:Macros
-%endif
-
-# Missing deps for testsuite
-BuildFlags: excludebuild:autoconf:el
-BuildFlags: excludebuild:autoconf:testsuite
-
-# Only build manifest embedding images here
-%if "%_repository" == "test_manifest_images"
-BuildFlags: onlybuild:edge-image-builder-image
-BuildFlags: onlybuild:release-manifest-image
-  # Exclude the images selected by the following section
-  # as the standard repository is a dependency
-  %ifarch aarch64
-    BuildFlags: excludebuild:baremetal-operator-image
-    BuildFlags: excludebuild:endpoint-copier-operator-image
-    BuildFlags: excludebuild:ironic-image
-    BuildFlags: excludebuild:ironic-ipa-downloader-image
-    BuildFlags: excludebuild:kube-rbac-proxy-image
-    BuildFlags: excludebuild:metallb-controller-image
-    BuildFlags: excludebuild:metallb-speaker-image
-  %endif
-%else
-# Only a subset of stack is arm64 ready
-  %ifarch aarch64
-    BuildFlags: onlybuild:autoconf
-    BuildFlags: onlybuild:baremetal-operator
-    BuildFlags: onlybuild:baremetal-operator-image
-    BuildFlags: onlybuild:ca-certificates-suse
-    BuildFlags: onlybuild:cosign
-    BuildFlags: onlybuild:crudini
-    BuildFlags: onlybuild:edge-image-builder
-    BuildFlags: onlybuild:edge-image-builder-image
-    BuildFlags: onlybuild:endpoint-copier-operator
-    BuildFlags: onlybuild:endpoint-copier-operator-image
-    BuildFlags: onlybuild:fakeroot
-    BuildFlags: onlybuild:hauler
-    BuildFlags: onlybuild:ipcalc
-    BuildFlags: onlybuild:ironic-image
-    BuildFlags: onlybuild:ironic-ipa-downloader-image
-    BuildFlags: onlybuild:ironic-ipa-ramdisk
-    BuildFlags: onlybuild:kube-rbac-proxy
-    BuildFlags: onlybuild:kube-rbac-proxy-image
-    BuildFlags: onlybuild:metallb
-    BuildFlags: onlybuild:metallb-controller-image
-    BuildFlags: onlybuild:metallb-speaker-image
-    BuildFlags: onlybuild:nm-configurator
-  %endif
-%endif
-
-%if "%_repository" == "images" || "%_repository" == "test_manifest_images"
-    Prefer: container:sles15-image
-    Type: docker
-    Repotype: none
-    Patterntype: none
-    BuildEngine: podman
-    Prefer: sles-release
-    BuildFlags: dockerarg:SLE_VERSION=15.6
-
-    # Publish multi-arch container images only once all archs have been built
-    PublishFlags: archsync
-%endif
-
-%if "%_repository" == "images_6.0"
-    Prefer: container:sles15-image
-    Type: docker
-    BuildEngine: podman
-    Repotype: none
-    Patterntype: none
-    BuildFlags: dockerarg:SLE_VERSION=16.0
-    BuildFlags: onlybuild:kiwi-builder-image
-
-    # Publish multi-arch container images only once all archs have been built
-    PublishFlags: archsync
-
-    # Exclude the images selected by the aarch64 section
-    %ifarch aarch64
-      BuildFlags: excludebuild:baremetal-operator-image
-      BuildFlags: excludebuild:edge-image-builder-image
-      BuildFlags: excludebuild:endpoint-copier-operator-image
-      BuildFlags: excludebuild:ironic-image
-      BuildFlags: excludebuild:ironic-ipa-downloader-image
-      BuildFlags: excludebuild:kube-rbac-proxy-image
-      BuildFlags: excludebuild:metallb-controller-image
-      BuildFlags: excludebuild:metallb-speaker-image
-    %endif
-
-%else
-    BuildFlags: excludebuild:kiwi-builder-image
-%endif
-
-
-
-%if "%_repository" == "charts" || "%_repository" == "phantomcharts" || "%_repository" == "releasecharts"
-    Type: helm
-    Repotype: helm
-    Patterntype: none
-    Required: perl-YAML-LibYAML
-%endif
-
-%if "%_repository" == "standard"
-    # for build openstack-ironic-image
-    BuildFlags: allowrootforbuild
-%endif
-
-# Enable reproducible builds
-# https://en.opensuse.org/openSUSE:Reproducible_Builds\#With_OBS
-Macros:
-%source_date_epoch_from_changelog Y
-%clamp_mtime_to_source_date_epoch Y
-%use_source_date_epoch_as_buildtime Y
-%_buildhost reproducible
-:Macros

_meta

@@ -1,74 +0,0 @@
-{#- 
-  This template is rendered by the render_meta.py script
-  it is not automatically enforced by OBS
--#}
-{%- set maintainers = [
-    "edge-engineering",
-] -%}
-<project name="{{ project }}">
-  <title>{{ title }}</title>
-  {%- if description is defined %}
-  <description>{{ description }}</description>
-  {%- else %}
-  <description/>
-  {%- endif %}
-  {%- if scm_url is defined %}
-  <scmsync>{{ scm_url }}</scmsync>
-  {%- endif %}
-{%- for maintainer in maintainers %}
-  <person userid="{{ maintainer }}" role="maintainer"/>
-{%- endfor %}
-{%- if not base_project %}
-  <build>
-    <disable/>
-    <enable repository="charts"/>
-    <enable repository="test_manifest_images"/>
-  </build>
-  <publish>
-    <disable repository="phantomcharts"/>
-  </publish>
-  <repository name="phantomcharts">
-    <arch>x86_64</arch>
-  </repository>
-{%- endif %}
-{%- for repository in ["images", "images_6.0", "test_manifest_images"] %}
-  <repository name="{{ repository }}">
-    {%- if release_project is defined and repository != "test_manifest_images" %}
-    <releasetarget project="{{ release_project }}" repository="images" trigger="manual"/>
-    {%- endif %}
-    <path project="SUSE:Registry" repository="standard"/>
-    {%- if repository == "images_6.0" %}
-      <path project="SUSE:CA" repository="16.0"/>
-      <path project="SUSE:ALP:Products:Marble:6.0" repository="standard"/>
-    {%- else %}
-      <path project="SUSE:CA" repository="SLE_15_SP6"/>
-      <path project="{{ project }}" repository="standard"/>
-    {%- endif %}
-    <arch>x86_64</arch>
-    <arch>aarch64</arch>
-  </repository>
-{%- endfor %}
-  <repository name="standard" block="local">
-    {%- if release_project is defined and not for_release %}
-    <releasetarget project="{{ release_project }}" repository="standard" trigger="manual"/>
-    {%- endif %}
-    <path project="Cloud:OpenStack:2024.2" repository="15.6"/>
-    <path project="SUSE:SLE-15-SP6:Update" repository="standard"/>
-    <arch>x86_64</arch>
-    <arch>aarch64</arch>
-  </repository>
-  <repository name="charts"{{ ' rebuild="local"' if not base_project }}>
-    {%- if release_project is defined and not for_release %}
-    <releasetarget project="{{ release_project }}" repository="phantomcharts" trigger="manual"/>
-    {%- endif %}
-    <path project="{{ project }}" repository="standard"/>
-    <arch>x86_64</arch>
-  </repository>
-  {%- if for_release %}
-  <repository name="releasecharts" rebuild="local">
-    <releasetarget project="{{ release_project }}" repository="charts" trigger="manual"/>
-    <path project="{{ project }}" repository="standard"/>
-    <arch>x86_64</arch>
-  </repository>
-  {%- endif %}
-</project>

akri-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%akri-chart:%%CHART_MAJOR%%.0.0_up0.12.20
-#!BuildTag: %%IMG_PREFIX%%akri-chart:%%CHART_MAJOR%%.0.0_up0.12.20-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%akri-chart:0.12.20
+#!BuildTag: %%IMG_PREFIX%%akri-chart:0.12.20-%RELEASE%
 annotations:
   catalog.cattle.io/display-name: Akri
 apiVersion: v2
@@ -8,4 +8,4 @@ description: A Helm chart for Akri
 icon: https://raw.githubusercontent.com/project-akri/akri-docs/main/art/icon/akri-icon-light.svg
 name: akri
 type: application
-version: "%%CHART_MAJOR%%.0.0+up0.12.20"
+version: 0.12.20

akri-chart/_service

@@ -11,7 +11,5 @@
     <param name="file">Chart.yaml</param>
     <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
     <param name="var">IMG_PREFIX</param>
-    <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
-    <param name="var">CHART_MAJOR</param>
   </service>
 </services>

akri-dashboard-extension-chart/Chart.yaml

@@ -1,21 +1,20 @@
-#!BuildTag: %%IMG_PREFIX%%akri-dashboard-extension-chart:%%CHART_MAJOR%%.0.0
-#!BuildTag: %%IMG_PREFIX%%akri-dashboard-extension-chart:%%CHART_MAJOR%%.0.0_up1.2.1
-#!BuildTag: %%IMG_PREFIX%%akri-dashboard-extension-chart:%%CHART_MAJOR%%.0.0_up1.2.1-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%akri-dashboard-extension-chart:1.2.0
+#!BuildTag: %%IMG_PREFIX%%akri-dashboard-extension-chart:1.2.0-%RELEASE%
 annotations:
   catalog.cattle.io/certified: rancher
   catalog.cattle.io/display-name: Akri
-  catalog.cattle.io/kube-version: ">= v1.26.0-0"
+  catalog.cattle.io/kube-version: '>= v1.26.0-0'
   catalog.cattle.io/namespace: cattle-ui-plugin-system
   catalog.cattle.io/os: linux
   catalog.cattle.io/permits-os: linux, windows
-  catalog.cattle.io/rancher-version: ">= 2.10.0-0"
+  catalog.cattle.io/rancher-version: '>= 2.10.0-0'
   catalog.cattle.io/scope: management
   catalog.cattle.io/ui-component: plugins
-  catalog.cattle.io/ui-extensions-version: ">= 3.0.0 < 4.0.0"
+  catalog.cattle.io/ui-extensions-version: '>= 3.0.0'
 apiVersion: v2
-appVersion: 302.0.0+up1.2.1
+appVersion: 1.2.0
 description: 'SUSE Edge: Akri extension for Rancher Dashboard'
+icon: https://raw.githubusercontent.com/cncf/artwork/main/projects/akri/icon/color/akri-icon-color.svg
 name: akri-dashboard-extension
 type: application
-version: "%%CHART_MAJOR%%.0.0+up1.2.1"
-icon: https://raw.githubusercontent.com/cncf/artwork/main/projects/akri/icon/color/akri-icon-color.svg
+version: 1.2.0

akri-dashboard-extension-chart/_service

@@ -11,7 +11,5 @@
     <param name="file">Chart.yaml</param>
     <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
     <param name="var">IMG_PREFIX</param>
-    <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
-    <param name="var">CHART_MAJOR</param>
   </service>
 </services>

akri-dashboard-extension-chart/templates/_helpers.tpl

@@ -38,7 +38,7 @@ Common labels
 helm.sh/chart: {{ include "extension-server.chart" . }}
 {{ include "extension-server.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | replace "+" "_" | quote }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
 app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{- end }}

akri-dashboard-extension-chart/templates/cr.yaml

@@ -8,7 +8,7 @@ spec:
   plugin:
     name: {{ include "extension-server.fullname" . }}
     version: {{ (semver (default .Chart.AppVersion .Values.plugin.versionOverride)).Original }}
-    endpoint: https://raw.githubusercontent.com/suse-edge/dashboard-extensions/gh-pages/extensions/akri-dashboard-extension/302.0.0+up1.2.1
+    endpoint: https://raw.githubusercontent.com/suse-edge/dashboard-extensions/gh-pages/extensions/akri-dashboard-extension/1.2.0
     noCache: {{ .Values.plugin.noCache }}
     noAuth: {{ .Values.plugin.noAuth }}
     metadata: {{ include "extension-server.pluginMetadata" . | indent 6 }}

akri-dashboard-extension-chart/values.yaml

@@ -8,5 +8,5 @@ plugin:
   metadata:
     catalog.cattle.io/display-name: Akri
     catalog.cattle.io/rancher-version: ">= 2.10.0-0"
-    catalog.cattle.io/ui-extensions-version: ">= 3.0.0 < 4.0.0"
+    catalog.cattle.io/ui-extensions-version: ">= 3.0.0"
     catalog.cattle.io/kube-version: ">= v1.26.0-0"

akri/_service

@@ -10,9 +10,7 @@
 	<service name="cargo_vendor" mode="manual">
 		<param name="srcdir">akri</param>
 	</service>
-	<service name="tar" mode="buildtime">
-		<param name="obsinfo">akri.obsinfo</param>
-	</service>
+	<service name="tar" mode="buildtime" />
 	<service name="set_version" mode="buildtime" >
 		<param name="fromfile">version.txt</param>
 		<param name="regex">^(.*)$</param>

baremetal-operator/_service

@@ -12,8 +12,10 @@
     <param name="without-version">yes</param>
     <param name="versionrewrite-replacement">\1</param>
   </service>
-  <service mode="buildtime" name="tar">
-    <param name="obsinfo">baremetal-operator.obsinfo</param>
+  <service mode="buildtime" name="tar" />
+  <service mode="buildtime" name="recompress">
+    <param name="file">*.tar</param>
+    <param name="compression">gz</param>
   </service>
    <service name="go_modules">
   </service>
@@ -21,7 +23,7 @@
     <param name="file">baremetal-operator.spec</param>
     <param name="var">SOURCE_COMMIT</param>
     <param name="eval">
-      SOURCE_COMMIT=$(grep commit baremetal-operator.obsinfo | cut -d" " -f2)
+      SOURCE_COMMIT=$(grep commit *.obsinfo | cut -d" " -f2)
     </param>
     <param name="verbose">1</param>
   </service>

baremetal-operator/baremetal-operator.spec

@@ -22,7 +22,7 @@ Release:        0.8.0
 Summary:        Implements a Kubernetes API for managing bare metal hosts
 License:        Apache-2.0
 URL:            https://github.com/metal3-io/baremetal-operator
-Source:         baremetal-operator-%{version}.tar
+Source:         baremetal-operator-%{version}.tar.gz
 Source1:        vendor.tar.gz
 BuildRequires:  golang(API) = 1.22
 ExcludeArch:    s390

cdi-chart/Chart.yaml

@@ -1,9 +1,9 @@
-#!BuildTag: %%IMG_PREFIX%%cdi-chart:%%CHART_MAJOR%%.0.0_up0.4.0
-#!BuildTag: %%IMG_PREFIX%%cdi-chart:%%CHART_MAJOR%%.0.0_up0.4.0-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%cdi-chart:0.4.0
+#!BuildTag: %%IMG_PREFIX%%cdi-chart:0.4.0-%RELEASE%
 apiVersion: v2
 appVersion: 1.60.1
 description: A Helm chart for Containerized Data Importer (CDI)
 icon: https://raw.githubusercontent.com/cncf/artwork/main/projects/kubevirt/icon/color/kubevirt-icon-color.svg
 name: cdi
 type: application
-version: "%%CHART_MAJOR%%.0.0+up0.4.0"
+version: 0.4.0

cdi-chart/_service

@@ -4,7 +4,5 @@
     <param name="file">Chart.yaml</param>
     <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
     <param name="var">IMG_PREFIX</param>
-    <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
-    <param name="var">CHART_MAJOR</param>
   </service>
 </services>

cluster-api-provider-metal3-image/Dockerfile

@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: Apache-2.0
+#!BuildTag: %%IMG_PREFIX%%cluster-api-provider-metal3:v%%cluster-api-provider-metal3_version%%
+#!BuildTag: %%IMG_PREFIX%%cluster-api-provider-metal3:%%cluster-api-provider-metal3_version%%
+#!BuildTag: %%IMG_PREFIX%%cluster-api-provider-metal3:%%cluster-api-provider-metal3_version%%-%RELEASE%
+#!BuildVersion: 15.6
+ARG SLE_VERSION
+FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
+
+FROM registry.suse.com/bci/bci-base:$SLE_VERSION AS base
+COPY --from=micro / /installroot/
+RUN zypper --installroot /installroot --non-interactive install --no-recommends cluster-api-provider-metal3 shadow; zypper -n clean; rm -rf /var/log/*
+
+FROM micro AS final
+# Define labels according to https://en.opensuse.org/Building_derived_containers
+# labelprefix=com.suse.application.cluster-api-provider-metal3
+LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
+LABEL org.opencontainers.image.title="SLE cluster-api-provider-metal3 Container Image"
+LABEL org.opencontainers.image.description="cluster-api-provider-metal3 based on the SLE Base Container Image."
+LABEL org.opencontainers.image.version="%%cluster-api-provider-metal3_version%%"
+LABEL org.opencontainers.image.url="https://www.suse.com/products/server/"
+LABEL org.opencontainers.image.created="%BUILDTIME%"
+LABEL org.opencontainers.image.vendor="SUSE LLC"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%cluster-api-provider-metal3:%%cluster-api-provider-metal3_version%%-%RELEASE%"
+LABEL org.openbuildservice.disturl="%DISTURL%"
+LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
+LABEL com.suse.eula="SUSE Combined EULA February 2024"
+LABEL com.suse.lifecycle-url="https://www.suse.com/lifecycle"
+LABEL com.suse.image-type="application"
+LABEL com.suse.release-stage="released"
+# endlabelprefix
+
+COPY --from=base /installroot /
+RUN mv /usr/bin/cluster-api-provider-metal3 /manager
+# Use uid of nonroot user (65532) because kubernetes expects numeric user when applying pod security policies
+USER 65532
+ENTRYPOINT [ "/manager" ]

cluster-api-provider-metal3-image/_service

@@ -1,6 +1,12 @@
 <services>
   <service mode="buildtime" name="kiwi_metainfo_helper"/>
   <service mode="buildtime" name="docker_label_helper"/>
+  <service name="replace_using_package_version" mode="buildtime">
+    <param name="file">Dockerfile</param>
+    <param name="regex">%%cluster-api-provider-metal3_version%%</param>
+    <param name="package">cluster-api-provider-metal3</param>
+    <param name="parse-version">patch</param>
+  </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Dockerfile</param>
     <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>

cluster-api-provider-metal3/_service

@@ -0,0 +1,23 @@
+<services>
+ <service name="obs_scm">
+    <param name="url">https://github.com/metal3-io/cluster-api-provider-metal3</param>
+    <param name="scm">git</param>
+    <param name="revision">v1.7.2</param>
+    <param name="version">_auto_</param>
+    <param name="versionformat">@PARENT_TAG@</param>
+    <param name="changesgenerate">enable</param>
+    <param name="changesauthor">steven.hardy@suse.com</param>
+    <param name="match-tag">v*</param>
+    <param name="versionrewrite-pattern">v(\d+\.\d+\.\d+)</param>
+    <param name="without-version">yes</param>
+    <param name="versionrewrite-replacement">\1</param>
+  </service>
+  <service mode="buildtime" name="tar" />
+  <service mode="buildtime" name="recompress">
+    <param name="file">*.tar</param>
+    <param name="compression">gz</param>
+  </service>
+   <service name="go_modules">
+  </service>
+  <service mode="buildtime" name="set_version" />
+</services>

cluster-api-provider-metal3/cluster-api-provider-metal3.spec

@@ -0,0 +1,54 @@
+#
+# spec file for package cluster-api-provider-metal3
+#
+# Copyright (c) 2023 SUSE LLC
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon. The license for this file, and modifications and additions to the
+# file, is the same license as for the pristine package itself (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+# Please submit bugfixes or comments via https://bugs.opensuse.org/
+#
+
+
+Name:           cluster-api-provider-metal3
+Version:        1.7.2
+Release:        0
+Summary:        Cluster API Infrastructure Provider for Metal3
+License:        Apache-2.0
+URL:            https://github.com/metal3-io/cluster-api-provider-metal3
+Source:         cluster-api-provider-metal3-%{version}.tar.gz
+Source1:        vendor.tar.gz
+BuildRequires:  golang(API) = 1.22
+ExcludeArch:    s390
+ExcludeArch:    %{ix86}
+
+%description
+
+Cluster API Provider Metal3 is one of the providers for Cluster API and enables
+users to deploy a Cluster API based cluster on top of bare metal infrastructure
+using Metal3.
+
+%prep
+%autosetup -a1 -n cluster-api-provider-metal3-%{version}
+
+%build
+go build \
+   -mod=vendor \
+   -buildmode=pie \
+   -a -ldflags '-extldflags "-static"'
+
+%install
+install -D -m0755 cluster-api-provider-metal3 %{buildroot}%{_bindir}/cluster-api-provider-metal3
+
+%files
+%license LICENSE
+%doc README.md
+%{_bindir}/cluster-api-provider-metal3
+
+%changelog

cosign/_service

@@ -8,8 +8,10 @@
     <param name="versionrewrite-pattern">v(.*)</param>
     <param name="changesgenerate">enable</param>
   </service>
-  <service mode="buildtime" name="tar">
-    <param name="obsinfo">cosign.obsinfo</param>
+  <service mode="buildtime" name="tar" />
+  <service mode="buildtime" name="recompress">
+    <param name="file">*.tar</param>
+    <param name="compression">gz</param>
   </service>
   <service mode="buildtime" name="set_version" />
   <service name="go_modules">

cosign/cosign.spec

@@ -24,7 +24,7 @@ Release:        0
 Summary:        Container Signing, Verification and Storage in an OCI registry
 License:        Apache-2.0
 URL:            https://github.com/rancher-government-carbide/cosign
-Source:         cosign-%{version}.tar
+Source:         cosign-%{version}.tar.gz
 Source1:        vendor.tar.gz         
 BuildRequires:  golang-packaging
 

edge-image-builder-image/Dockerfile

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.1.2-rc1
-#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.1.2-rc1-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.1.0
+#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.1.0-%RELEASE%
 #!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-base:$SLE_VERSION
@@ -15,11 +15,11 @@ RUN zypper --non-interactive install --no-recommends edge-image-builder qemu-x86
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE edge-image-builder Container Image"
 LABEL org.opencontainers.image.description="edge-image-builder based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="1.1.2-rc1"
+LABEL org.opencontainers.image.version="1.1.0"
 LABEL org.opencontainers.image.url="https://www.suse.com/products/server/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%edge-image-builder:1.1.2-rc1-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%edge-image-builder:1.1.0-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"

edge-image-builder-image/_service

@@ -7,14 +7,10 @@
     <param name="eval">IMG_REPO=$(rpm --macros=/root/.rpmmacros -E %img_repo)</param>
     <param name="var">IMG_REPO</param>
     <param name="file">artifacts.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
     <param name="eval">CHART_REPO=$(rpm --macros=/root/.rpmmacros -E %chart_repo)</param>
     <param name="var">CHART_REPO</param>
     <param name="eval">SUPPORT_LEVEL=$(rpm --macros=/root/.rpmmacros -E %support_level)</param>
     <param name="var">SUPPORT_LEVEL</param>
-    <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
-    <param name="var">CHART_MAJOR</param>
   </service>
 </services>
 

edge-image-builder-image/artifacts.yaml

@@ -1,11 +1,11 @@
 metallb:
   chart: metallb-chart
-  repository: "%%CHART_REPO%%/%%IMG_PREFIX%%"
-  version: "%%CHART_MAJOR%%.0.1+up0.14.9"
+  repository: %%CHART_REPO%%/3.1
+  version: 0.14.9
 endpoint-copier-operator:
   chart: endpoint-copier-operator-chart
-  repository: "%%CHART_REPO%%/%%IMG_PREFIX%%"
-  version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+  repository: %%CHART_REPO%%/3.1
+  version: 0.2.1
 kubernetes:
   k3s:
     selinuxPackage: k3s-selinux-1.6-1.slemicro.noarch
@@ -13,3 +13,4 @@ kubernetes:
   rke2:
     selinuxPackage: rke2-selinux
     selinuxRepository: https://rpm.rancher.io/rke2/stable/common/slemicro/noarch
+

edge-image-builder/_service

@@ -1,19 +1,18 @@
 <services>
   <service name="obs_scm">
     <param name="url">https://github.com/suse-edge/edge-image-builder.git</param>
+    <param name="versionformat">@PARENT_TAG@</param>
     <param name="scm">git</param>
     <param name="exclude">.git</param>
-    <param name="revision">v1.1.2-rc1</param>
-    <!-- Uncomment and set this For Pre-Release Version -->
-    <param name="version">1.1.2~rc0</param>
-    <!-- Uncomment and this for regular version -->
-    <!-- <param name="versionformat">@PARENT_TAG@</param> -->
+    <param name="revision">v1.1.0</param>
     <param name="versionrewrite-pattern">v(\d+).(\d+).(\d+)</param>
     <param name="versionrewrite-replacement">\1.\2.\3</param>
     <param name="changesgenerate">enable</param>
   </service>
-  <service mode="buildtime" name="tar">
-    <param name="obsinfo">edge-image-builder.obsinfo</param>
+  <service mode="buildtime" name="tar" />
+  <service mode="buildtime" name="recompress">
+    <param name="file">*.tar</param>
+    <param name="compression">gz</param>
   </service>
   <service mode="buildtime" name="set_version" />
   <service name="go_modules">

edge-image-builder/edge-image-builder.spec

@@ -17,12 +17,12 @@
 
 
 Name:           edge-image-builder
-Version:        1.1.2~rc1
+Version:        1.1.0
 Release:        0
 Summary:        Edge Image Builder
 License:        Apache-2.0
 URL:            https://github.com/suse-edge/edge-image-builder
-Source:         edge-image-builder-%{version}.tar
+Source:         edge-image-builder-%{version}.tar.gz
 Source1:        vendor.tar.gz
 BuildRequires:  golang(API) go1.22
 BuildRequires:  golang-packaging

endpoint-copier-operator-chart/Chart.yaml

@@ -1,8 +1,8 @@
-#!BuildTag: %%IMG_PREFIX%%endpoint-copier-operator-chart:%%CHART_MAJOR%%.0.0_up0.2.1
-#!BuildTag: %%IMG_PREFIX%%endpoint-copier-operator-chart:%%CHART_MAJOR%%.0.0_up0.2.1-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%endpoint-copier-operator-chart:0.2.1
+#!BuildTag: %%IMG_PREFIX%%endpoint-copier-operator-chart:0.2.1-%RELEASE%
 apiVersion: v2
 appVersion: v0.2.0
 description: A Helm chart for Kubernetes
 name: endpoint-copier-operator
 type: application
-version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+version: 0.2.1

endpoint-copier-operator-chart/_service

@@ -11,7 +11,5 @@
     <param name="file">Chart.yaml</param>
     <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
     <param name="var">IMG_PREFIX</param>
-    <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
-    <param name="var">CHART_MAJOR</param>
   </service>
 </services>

endpoint-copier-operator/_service

@@ -12,8 +12,10 @@
     <param name="without-version">yes</param>
     <param name="versionrewrite-replacement">\1</param>
   </service>
-  <service mode="buildtime" name="tar">
-    <param name="obsinfo">endpoint-copier-operator.obsinfo</param>
+  <service mode="buildtime" name="tar" />
+  <service mode="buildtime" name="recompress">
+    <param name="file">*.tar</param>
+    <param name="compression">gz</param>
   </service>
   <service name="go_modules">
   </service>

endpoint-copier-operator/endpoint-copier-operator.spec

@@ -22,7 +22,7 @@ Release:        0.2.0
 Summary:        Implements a Kubernetes API for copying endpoint resources
 License:        Apache-2.0
 URL:            https://github.com/suse-edge/endpoint-copier-operator
-Source:         endpoint-copier-operator-%{version}.tar
+Source:         endpoint-copier-operator-%{version}.tar.gz
 Source1:        vendor.tar.gz
 BuildRequires:  golang(API) = 1.20
 ExcludeArch:    s390

frr-image/Dockerfile

@@ -1,58 +0,0 @@
-# SPDX-License-Identifier: MIT
-#!BuildTag: %%IMG_PREFIX%%frr:8.4
-#!BuildTag: %%IMG_PREFIX%%frr:8.4-%RELEASE%
-#!BuildVersion: 15.5
-ARG SLE_VERSION
-FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
-
-FROM registry.suse.com/bci/bci-base:$SLE_VERSION AS base
-COPY --from=micro / /installroot/
-RUN zypper --installroot /installroot --non-interactive install --no-recommends tcpdump libpcap-devel iproute2 iputils strace socat frr python3 catatonit sed util-linux; zypper -n clean; rm -rf /var/log/*
-
-FROM micro AS final
-# Define labels according to https://en.opensuse.org/Building_derived_containers
-# labelprefix=com.suse.application.frr
-LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
-LABEL org.opencontainers.image.title="FRR Container Image"
-LABEL org.opencontainers.image.description="frr based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="8.4"
-LABEL org.opencontainers.image.url="https://www.suse.com/products/server/"
-LABEL org.opencontainers.image.created="%BUILDTIME%"
-LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%frr:8.4-%RELEASE%"
-LABEL org.openbuildservice.disturl="%DISTURL%"
-LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
-LABEL com.suse.eula="SUSE Combined EULA February 2024"
-LABEL com.suse.lifecycle-url="https://www.suse.com/lifecycle"
-LABEL com.suse.image-type="application"
-LABEL com.suse.release-stage="released"
-# endlabelprefix
-
-COPY --from=base /installroot /
-
-#Install frr
-USER root
-
-ENV PYTHONDONTWRITEBYTECODE yes
-
-# frr.sh is the entry point. This script examines environment
-# variables to direct operation and configure ovn
-ADD frr.sh /root/
-ADD daemons /etc/frr
-ADD frr.conf /etc/frr
-ADD vtysh.conf /etc/frr
-
-RUN chown frr:frr /etc/frr/daemons /etc/frr/frr.conf
-
-RUN ln -s /usr/bin/catatonit /sbin/tini
-RUN usermod -a -G frrvty frr
-
-COPY docker-start /usr/libexec/frr/docker-start
-RUN cp -r /usr/libexec/frr /usr/lib/ # required because of the different path on rhel
-
-WORKDIR /root
-ENTRYPOINT ["/sbin/tini", "--"]
-
-COPY docker-start /usr/lib/frr/docker-start
-RUN chmod +x /usr/lib/frr/docker-start
-CMD ["/usr/lib/frr/docker-start"]

frr-image/daemons

@@ -1,82 +0,0 @@
-# This file tells the frr package which daemons to start.
-#
-# Entries are in the format: <daemon>=(yes|no|priority)
-#   0, "no"  = disabled
-#   1, "yes" = highest priority
-#   2 .. 10  = lower priorities
-#
-# For daemons which support multiple instances, a 2nd line listing
-# the instances can be added. Eg for ospfd:
-#   ospfd=yes
-#   ospfd_instances="1,2"
-#
-# Priorities were suggested by Dancer <dancer@zeor.simegen.com>.
-# They're used to start the FRR daemons in more than one step
-# (for example start one or two at network initialization and the
-# rest later). The number of FRR daemons being small, priorities
-# must be between 1 and 9, inclusive (or the initscript has to be
-# changed). /etc/init.d/frr then can be started as
-#
-#   /etc/init.d/frr <start|stop|restart|<priority>>
-#
-# where priority 0 is the same as 'stop', priority 10 or 'start'
-# means 'start all'
-#
-# Sample configurations for these daemons can be found in
-# /usr/share/doc/frr/examples/.
-#
-# ATTENTION:
-#
-# When activation a daemon at the first time, a config file, even if it is
-# empty, has to be present *and* be owned by the user and group "frr", else
-# the daemon will not be started by /etc/init.d/frr. The permissions should
-# be u=rw,g=r,o=.
-# When using "vtysh" such a config file is also needed. It should be owned by
-# group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too.
-#
-watchfrr_enable=yes
-watchfrr_options="-r '/usr/lib/frr/frr restart %s' -s '/usr/lib/frr/frr start %s' -k '/usr/lib/frr/frr stop %s'"
-#
-zebra=yes
-bgpd=yes
-ospfd=no
-ospf6d=no
-ripd=no
-ripngd=no
-isisd=no
-pimd=no
-nhrpd=no
-eigrpd=no
-sharpd=no
-pbrd=no
-staticd=yes
-bfdd=yes
-fabricd=no
-
-#
-# Command line options for the daemons
-#
-zebra_options=("-A 127.0.0.1")
-bgpd_options=("-A 127.0.0.1")
-ospfd_options=("-A 127.0.0.1")
-ospf6d_options=("-A ::1")
-ripd_options=("-A 127.0.0.1")
-ripngd_options=("-A ::1")
-isisd_options=("-A 127.0.0.1")
-pimd_options=("-A 127.0.0.1")
-nhrpd_options=("-A 127.0.0.1")
-eigrpd_options=("-A 127.0.0.1")
-sharpd_options=("-A 127.0.0.1")
-pbrd_options=("-A 127.0.0.1")
-staticd_options=("-A 127.0.0.1")
-bfdd_options=("-A 127.0.0.1")
-fabricd_options=("-A 127.0.0.1")
-
-#
-# If the vtysh_enable is yes, then the unified config is read
-# and applied if it exists.  If no unified frr.conf exists
-# then the per-daemon <daemon>.conf files are used)
-# If vtysh_enable is no or non-existant, the frr.conf is ignored.
-# it is highly suggested to have this set to yes
-vtysh_enable=yes
-

frr-image/docker-start

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-source /usr/lib/frr/frrcommon.sh
-/usr/lib/frr/watchfrr $(daemon_list)

frr-image/frr.conf

@@ -1,53 +0,0 @@
-frr defaults traditional
-log file /var/log/frr/frr.log
-log syslog informational
-log stdout debugging
-ipv6 forwarding
-service integrated-vtysh-config
-!
-debug bgp updates in
-debug bgp updates out
-debug bgp zebra
-!
-interface eth0
- no ipv6 nd suppress-ra
- ipv6 nd ra-interval 10
-!
-router bgp OCPASN
- bgp router-id OCPROUTERID
- bgp bestpath as-path multipath-relax
- bgp bestpath compare-routerid
-!
- neighbor OCPnodes peer-group
- neighbor OCPnodes description Internal OCP Nodes
- neighbor OCPnodes remote-as OCPASN
- neighbor OCPnodes bfd
- neighbor OCPnodes capability extended-nexthop 
- !neighbor eth0 interface peer-group OCPnodes
- !neighbor OCPPEER remote-as OCPASN peer-group OCPnodes
- neighbor OCPPEER peer-group OCPnodes
- !
- address-family ipv4 unicast
-  redistribute connected
-  neighbor OCPnodes activate
- exit-address-family
- !
- address-family ipv6 unicast
-  redistribute connected
-  neighbor OCPnodes activate
-  neighbor OCPnodes nexthop-local unchanged
- exit-address-family
- !
-!
-bfd
- peer OCPPEER vrf default interface eth0
-   receive-interval 2000
-   transmit-interval 2000
-   echo-mode
-   echo-interval 3000
-   no shutdown
- exit
-!
-line vty
-!
-

frr-image/frr.sh

@@ -1,124 +0,0 @@
-#!/bin/bash
-#set -euo pipefail
-
-# Enable verbose shell output if FRR_SH_VERBOSE is set to 'true'
-if [[ "${FRR_SH_VERBOSE:-}" == "true" ]]; then
-  set -x
-fi
-
-# The argument to the command is the operation to be performed
-# frr-node display display_env 
-# a cmd must be provided, there is no default
-cmd=${1:-""}
-
-# The frr user id, by default it is going to be frr:frr
-frr_user_id=${FRR_USER_ID:-""}
-
-# frr options
-frr_options=${FRR_OPTIONS:-""}
-
-# This script is the entrypoint to the image.
-# frr.sh version (update when API between daemonset and script changes - v.x.y)
-frr_version="3"
-
-# The daemonset version must be compatible with this script.
-# The default when FRR_DAEMONSET_VERSION is not set is version 3
-frr_daemonset_version=${FRR_DAEMONSET_VERSION:-"3"}
-
-# hostname is the host's hostname when using host networking,
-# This is useful on the master
-# otherwise it is the container ID (useful for debugging).
-frr_pod_host=${K8S_NODE:-$(hostname)}
-
-# The ovs user id, by default it is going to be root:root
-frr_user_id=${FRR_USER_ID:-""}
-
-# frr options
-frr_options=${FRR_OPTIONS:-""}
-
-# frr.conf variables
-ocp_asn=${OCPASN:-65000}
-ocp_routerid=${OCPROUTERID:-"10.10.10.1"}
-ocp_peer=${OCPPEER:-"10.10.10.1"}
-
-FRR_ETCDIR=/etc/frr
-FRR_RUNDIR=/var/run/frr
-FRR_LOGDIR=/var/log/frr
-
-# =========================================
-
-setup_frr_permissions() {
-    chown -R ${frr_user_id} ${FRR_RUNDIR}
-    chown -R ${frr_user_id} ${FRR_LOGDIR}
-    chown -R ${frr_user_id} ${FRR_ETCDIR}
-}
-
-# =========================================
-
-display_version() {
-  echo " =================== hostname: ${frr_pod_host}"
-  echo " =================== daemonset version ${frr_daemonset_version}"
-  if [[ -f /root/git_info ]]; then
-    disp_ver=$(cat /root/git_info)
-    return
-  fi
-}
-
-display_env() {
-  echo FRR_USER_ID ${frr_user_id}
-  echo FRR_OPTIONS ${frr_options}
-  echo frr.sh version ${frr_version}
-  echo ocp_asn ${ocp_asn}
-  echo ocp_routerid ${ocp_routerid}
-  echo ocp_peer ${ocp_peer}
-}
-
-# frr-node - all nodes
-frr-node() {
-  trap 'kill $(jobs -p) ; exit 0' TERM
-  rm -f ${FRR_RUNDIR}/frr.pid
-  echo "=============== frr-node ========== update frr.conf"
-  sed -i "s/OCPASN/$ocp_asn/" /etc/frr/frr.conf
-  sed -i "s/OCPPEER/$ocp_peer/" /etc/frr/frr.conf
-  sed -i "s/OCPROUTERID/$ocp_routerid/" /etc/frr/frr.conf
-
-  #chown -R frr:frr /etc/frr
-  chown -R frr:frr ${FRR_RUNDIR}
-  echo "=============== frr-node ========== starting"
-  # /usr/lib/frr/frrinit.sh start
-  # bash -x /usr/lib/frr/frrinit.sh start
-  bash -x 
-  /usr/lib/frr/frrinit.sh start
-  frrResult=$?
-  echo "=============== frrinit result is ${frrResult} " 
- 
-  # Sleep forever
-  exec tail -f /dev/null
-}
-
-echo "================== frr.sh --- version: ${frr_version} ================"
-
-display_version
-
-display_env
-
-case ${cmd} in
-"frr-node") 
-  frr-node
-  ;;
-"display_env")
-  display_env
-  exit 0
-  ;;
-"display")
-  display
-  exit 0
-  ;;
-*)
-  echo "invalid command ${cmd}"
-  echo "valid v3 commands: frr-node display_env display " 
-  exit 0
-  ;;
-esac
-
-exit 0

frr-k8s/_service

@@ -12,8 +12,10 @@
     <param name="without-version">yes</param>
     <param name="versionrewrite-replacement">\1</param>
   </service>
-  <service mode="buildtime" name="tar">
-    <param name="obsinfo">frr-k8s.obsinfo</param>
+  <service mode="buildtime" name="tar" />
+  <service mode="buildtime" name="recompress">
+    <param name="file">*.tar</param>
+    <param name="compression">gz</param>
   </service>
   <service name="go_modules">
   </service>

frr-k8s/frr-k8s.spec

@@ -22,7 +22,7 @@ Release:        0.0.14
 Summary:        A kubernetes based daemonset that exposes a subset of the FRR API in a kubernetes compliant manner.
 License:        Apache-2.0
 URL:            https://github.com/metallb/frr-k8s
-Source:         frr-k8s-%{version}.tar
+Source:         frr-k8s-%{version}.tar.gz
 Source1:        vendor.tar.gz
 BuildRequires:  golang(API) = 1.22
 ExcludeArch:    s390

hauler/_service

@@ -8,8 +8,10 @@
     <param name="versionrewrite-pattern">v(.*)</param>
     <param name="changesgenerate">enable</param>
   </service>
-  <service mode="buildtime" name="tar">
-    <param name="obsinfo">hauler.obsinfo</param>
+  <service mode="buildtime" name="tar" />
+  <service mode="buildtime" name="recompress">
+    <param name="file">*.tar</param>
+    <param name="compression">gz</param>
   </service>
   <service mode="buildtime" name="set_version" />
   <service name="go_modules">

hauler/hauler.spec

@@ -23,7 +23,7 @@ Release:        0
 Summary:        Airgap Swiss Army Knife
 License:        Apache-2.0
 URL:            https://github.com/hauler-dev/hauler
-Source:         hauler-%{version}.tar
+Source:         hauler-%{version}.tar.gz
 Source1:        vendor.tar.gz
 BuildRequires:  golang-packaging
 BuildRequires:  cosign

ip-address-manager-image/Dockerfile

@@ -1,25 +1,26 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%frr-k8s:v%%frr-k8s_version%%
-#!BuildTag: %%IMG_PREFIX%%frr-k8s:v%%frr-k8s_version%%-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%ip-address-manager:v%%ip-address-manager_version%%
+#!BuildTag: %%IMG_PREFIX%%ip-address-manager:%%ip-address-manager_version%%
+#!BuildTag: %%IMG_PREFIX%%ip-address-manager:%%ip-address-manager_version%%-%RELEASE%
 #!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 
 FROM registry.suse.com/bci/bci-base:$SLE_VERSION AS base
 COPY --from=micro / /installroot/
-RUN zypper --installroot /installroot --non-interactive install --no-recommends frr-k8s; zypper -n clean; rm -rf /var/log/*
+RUN zypper --installroot /installroot --non-interactive install --no-recommends ip-address-manager shadow; zypper -n clean; rm -rf /var/log/*
 
 FROM micro AS final
 # Define labels according to https://en.opensuse.org/Building_derived_containers
-# labelprefix=com.suse.application.endpoint-copier-operator
+# labelprefix=com.suse.application.ip-address-manager
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
-LABEL org.opencontainers.image.title="SLE frr-k8s Container Image"
-LABEL org.opencontainers.image.description="frr-k8s based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="%%frr-k8s_version%%"
+LABEL org.opencontainers.image.title="SLE ip-address-manager Container Image"
+LABEL org.opencontainers.image.description="ip-address-manager based on the SLE Base Container Image."
+LABEL org.opencontainers.image.version="%%ip-address-manager_version%%"
 LABEL org.opencontainers.image.url="https://www.suse.com/products/server/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%frr-k8s:v%%frr-k8s_version%%-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ip-address-manager:%%ip-address-manager_version%%-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"
@@ -28,6 +29,8 @@ LABEL com.suse.image-type="application"
 LABEL com.suse.release-stage="released"
 # endlabelprefix
 
-#Install frr-k8s
 COPY --from=base /installroot /
-ENTRYPOINT ["/frr-k8s"]
+RUN mv /usr/bin/ip-address-manager /manager
+# Use uid of nonroot user (65532) because kubernetes expects numeric user when applying pod security policies
+USER 65532
+ENTRYPOINT [ "/manager" ]

ip-address-manager-image/_service

@@ -3,8 +3,8 @@
   <service mode="buildtime" name="docker_label_helper"/>
   <service name="replace_using_package_version" mode="buildtime">
     <param name="file">Dockerfile</param>
-    <param name="regex">%%frr-k8s_version%%</param>
-    <param name="package">frr-k8s</param>
+    <param name="regex">%%ip-address-manager_version%%</param>
+    <param name="package">ip-address-manager</param>
     <param name="parse-version">patch</param>
   </service>
   <service name="replace_using_env" mode="buildtime">

ip-address-manager/_service

@@ -0,0 +1,23 @@
+<services>
+ <service name="obs_scm">
+    <param name="url">https://github.com/metal3-io/ip-address-manager</param>
+    <param name="scm">git</param>
+    <param name="revision">v1.7.2</param>
+    <param name="version">_auto_</param>
+    <param name="versionformat">@PARENT_TAG@</param>
+    <param name="changesgenerate">enable</param>
+    <param name="changesauthor">steven.hardy@suse.com</param>
+    <param name="match-tag">v*</param>
+    <param name="versionrewrite-pattern">v(\d+\.\d+\.\d+)</param>
+    <param name="without-version">yes</param>
+    <param name="versionrewrite-replacement">\1</param>
+  </service>
+  <service mode="buildtime" name="tar" />
+  <service mode="buildtime" name="recompress">
+    <param name="file">*.tar</param>
+    <param name="compression">gz</param>
+  </service>
+   <service name="go_modules">
+  </service>
+  <service mode="buildtime" name="set_version" />
+</services>

ip-address-manager/ip-address-manager.spec

@@ -0,0 +1,51 @@
+#
+# spec file for package ip-address-manager
+#
+# Copyright (c) 2023 SUSE LLC
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon. The license for this file, and modifications and additions to the
+# file, is the same license as for the pristine package itself (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+# Please submit bugfixes or comments via https://bugs.opensuse.org/
+#
+
+
+Name:           ip-address-manager
+Version:        1.7.2
+Release:        0
+Summary:        Metal3 IPAM controller
+License:        Apache-2.0
+URL:            https://github.com/metal3-io/ip-address-manager
+Source:         ip-address-manager-%{version}.tar.gz
+Source1:        vendor.tar.gz
+BuildRequires:  golang(API) = 1.22
+ExcludeArch:    s390
+ExcludeArch:    %{ix86}
+
+%description
+
+Metal3 IPAM controller
+
+%prep
+%autosetup -a1 -n ip-address-manager-%{version}
+
+%build
+go build \
+   -mod=vendor \
+   -buildmode=pie \
+
+%install
+install -D -m0755 ip-address-manager %{buildroot}%{_bindir}/ip-address-manager
+
+%files
+%license LICENSE
+%doc README.md
+%{_bindir}/ip-address-manager
+
+%changelog

ironic-image/Dockerfile

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%ironic:26.1.2.3
-#!BuildTag: %%IMG_PREFIX%%ironic:26.1.2.3-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%ironic:26.1.2.0
+#!BuildTag: %%IMG_PREFIX%%ironic:26.1.2.0-%RELEASE%
 #!BuildVersion: 15.6
 
 ARG SLE_VERSION
@@ -8,14 +8,7 @@ FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 
 FROM registry.suse.com/bci/bci-base:$SLE_VERSION AS base
 
-#!ArchExclusiveLine: x86_64
-RUN if [ "$(uname -m)" = "x86_64" ];then \
-      zypper -n  in --no-recommends gcc git make xz-devel shim dosfstools mtools glibc-extra grub2-x86_64-efi grub2; zypper -n clean; rm -rf /var/log/*; \
-    fi
-#!ArchExclusiveLine: aarch64
-RUN if [ "$(uname -m)" = "aarch64" ];then \
-      zypper -n rm kubic-locale-archive-2.31-10.36.noarch openssl-1_1-1.1.1l-150500.17.37.1.aarch64; zypper -n in --no-recommends gcc git make xz-devel openssl-3 mokutil shim dosfstools mtools glibc glibc-extra grub2 grub2-arm64-efi; zypper -n clean; rm -rf /var/log/* ;\
-    fi
+RUN set -euo pipefail; zypper -n  in --no-recommends gcc git make xz-devel shim dosfstools mtools glibc-extra grub2-x86_64-efi grub2; zypper -n clean; rm -rf /var/log/*
 WORKDIR /tmp
 COPY prepare-efi.sh /bin/
 RUN set -euo pipefail; chmod +x /bin/prepare-efi.sh
@@ -23,15 +16,7 @@ RUN /bin/prepare-efi.sh
 
 COPY --from=micro / /installroot/
 RUN sed -i -e 's%^# rpm.install.excludedocs = no.*%rpm.install.excludedocs = yes%g' /etc/zypp/zypp.conf
-
-#!ArchExclusiveLine: x86_64
-RUN if [ "$(uname -m)" = "x86_64" ];then \
-      zypper --installroot /installroot --non-interactive install --no-recommends syslinux python311-devel python311 python311-pip python-dracclient python311-sushy-oem-idrac python311-proliantutils python311-sushy python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 apache2-mod_wsgi inotify-tools ipcalc ipmitool iproute2 procps qemu-tools sqlite3 util-linux xorriso tftp ipxe-bootimgs python311-sushy-tools crudini openstack-ironic openstack-ironic-inspector-api; \
-    fi
-#!ArchExclusiveLine: aarch64
-RUN if [ "$(uname -m)" = "aarch64" ];then \
-      zypper --installroot /installroot --non-interactive install --no-recommends python311-devel python311 python311-pip python-dracclient python311-sushy-oem-idrac python311-proliantutils python311-sushy python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 apache2-mod_wsgi inotify-tools ipcalc ipmitool iproute2 procps qemu-tools sqlite3 util-linux xorriso tftp ipxe-bootimgs python311-sushy-tools crudini openstack-ironic openstack-ironic-inspector-api; \
-    fi
+RUN zypper --installroot /installroot --non-interactive install --no-recommends python311-devel python311 python311-pip python-dracclient python311-sushy-oem-idrac python311-proliantutils python311-sushy python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 inotify-tools ipcalc ipmitool iproute2 procps qemu-tools sqlite3 util-linux xorriso tftp syslinux ipxe-bootimgs crudini openstack-ironic
 
 # DATABASE
 RUN mkdir -p /installroot/var/lib/ironic && \
@@ -46,8 +31,8 @@ LABEL org.opencontainers.image.description="Openstack Ironic based on the SLE Ba
 LABEL org.opencontainers.image.url="https://www.suse.com/products/server/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opencontainers.image.version="26.1.2.3"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic:26.1.2.3-%RELEASE%"
+LABEL org.opencontainers.image.version="26.1.2.0"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic:26.1.2.0-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"
@@ -79,15 +64,7 @@ RUN mkdir -p $GRUB_DIR
 
 # IRONIC #
 RUN cp /usr/share/ipxe/undionly.kpxe /tftpboot/undionly.kpxe
-#!ArchExclusiveLine: x86_64
-RUN if [ "$(uname -m)" = "x86_64" ];then \
-      cp /usr/share/ipxe/ipxe-x86_64.efi /tftpboot/ipxe.efi ;\
-    fi
-#!ArchExclusiveLine: x86_64
-RUN if [ "$(uname -m)" = "aarch64" ]; then\ 
-     cp /usr/share/ipxe/snp-arm64.efi /tftpboot/ipxe.efi; cp /usr/share/ipxe/snp-arm64.efi /tftpboot/snp-arm64.efi; cp /usr/share/ipxe/snp-arm64.efi /tftpboot/snp.efi ;\
-    fi
-    
+RUN cp /usr/share/ipxe/ipxe-x86_64.efi /tftpboot/ipxe.efi
 COPY --from=base /tmp/esp.img /tmp/uefi_esp.img
 
 COPY ironic.conf.j2 /etc/ironic/

ironic-image/apache2-vmedia.conf.j2

@@ -10,15 +10,17 @@ Listen {{ env.VMEDIA_TLS_PORT }}
     SSLCertificateFile {{ env.IRONIC_VMEDIA_CERT_FILE }}
     SSLCertificateKeyFile {{ env.IRONIC_VMEDIA_KEY_FILE }}
 
-    <Directory "/shared">
-        AllowOverride None
-        Require all granted
+    <Directory ~ "/shared/html">
+         Order deny,allow
+         deny from all
     </Directory>
-
-    <Directory "/shared/html">
-        Options Indexes FollowSymLinks
-        AllowOverride None
-        Require all granted
+    <Directory ~ "/shared/html/(redfish|ilo)/">
+         Order allow,deny
+         allow from all
+    </Directory>
+    <Directory ~ "/shared/html/images/">
+         Order allow,deny
+         allow from all
     </Directory>
 </VirtualHost>
 

ironic-image/ironic.conf.j2

@@ -83,7 +83,7 @@ send_sensor_data = {{ env.SEND_SENSOR_DATA }}
 # Power state is checked every 60 seconds and BMC activity should
 # be avoided more often than once every sixty seconds.
 send_sensor_data_interval = 160
-bootloader = {{ env.IRONIC_BOOT_BASE_URL }}/uefi_esp.img
+bootloader = http://{{ env.IRONIC_URL_HOST }}:{{ env.HTTP_PORT }}/uefi_esp.img
 verify_step_priority_override = management.clear_job_queue:90
 # We don't use this feature, and it creates an additional load on the database
 node_history = False
@@ -112,7 +112,7 @@ default_boot_option = local
 erase_devices_metadata_priority = 10
 erase_devices_priority = 0
 http_root = /shared/html/
-http_url = {{ env.IRONIC_BOOT_BASE_URL }}
+http_url = http://{{ env.IRONIC_URL_HOST }}:{{ env.HTTP_PORT }}
 fast_track = {{ env.IRONIC_FAST_TRACK }}
 {% if env.IRONIC_BOOT_ISO_SOURCE %}
 ramdisk_image_download_source = {{ env.IRONIC_BOOT_ISO_SOURCE }}

ironic-image/prepare-efi.sh

@@ -6,37 +6,22 @@ ARCH=$(uname -m)
 DEST=${2:-/tmp/esp.img}
 OS=${1:-sles}
 
-if [ $ARCH = "aarch64" ]; then
-  BOOTEFI=BOOTAA64.EFI
-  GRUBEFI=grubaa64.efi
-else
 BOOTEFI=BOOTX64.efi
 GRUBEFI=grubx64.efi
-fi
 
 dd bs=1024 count=6400 if=/dev/zero of=$DEST
 mkfs.msdos -F 12 -n 'ESP_IMAGE' $DEST
 
 mkdir -p /boot/efi/EFI/BOOT
-mkdir -p /boot/efi/EFI/$OS
-if [ $ARCH = "aarch64" ]; then
-  cp -L /usr/share/efi/aarch64/shim.efi /boot/efi/EFI/BOOT/$BOOTEFI
-  cp -L /usr/share/efi/aarch64/grub.efi /boot/efi/EFI/BOOT/grub.efi
-  cp /usr/share/grub2/arm64-efi/grub.efi /boot/efi/EFI/$OS/grubaa64.efi
-else
 cp -L /usr/lib64/efi/shim.efi /boot/efi/EFI/BOOT/$BOOTEFI
+mkdir -p /boot/efi/EFI/$OS
 #cp /usr/share/grub2/x86_64-efi/grub.efi /boot/efi/EFI/$OS/$GRUBEFI
 cp /usr/share/grub2/x86_64-efi/grub.efi /boot/efi/EFI/$OS/grub.efi
-fi
 
 mmd -i $DEST EFI
 mmd -i $DEST EFI/BOOT
 mcopy -i $DEST -v /boot/efi/EFI/BOOT/$BOOTEFI ::EFI/BOOT
-if [ $ARCH = "aarch64" ]; then
-  mcopy -i $DEST -v /boot/efi/EFI/BOOT/grub.efi ::EFI/BOOT
-  mcopy -i $DEST -v /boot/efi/EFI/$OS/$GRUBEFI ::EFI/BOOT
-else
+#mcopy -i $DEST -v /boot/efi/EFI/$OS/$GRUBEFI ::EFI/BOOT
 mcopy -i $DEST -v /boot/efi/EFI/$OS/grub.efi ::EFI/BOOT
-fi 
 mdir -i $DEST ::EFI/BOOT;
 

ironic-image/runlogwatch.sh

@@ -3,14 +3,6 @@
 # Ramdisk logs path
 LOG_DIR="/shared/log/ironic/deploy"
 
-# The ironic container creates the directory, wait for
-# it to exist before running inotifywait or it can fail causing
-# a spurious restart
-while [ ! -d "${LOG_DIR}" ]; do
-  echo "Waiting for ${LOG_DIR}"
-  sleep 5
-done
-
 inotifywait -m "${LOG_DIR}" -e close_write |
     while read -r path _action file; do
         echo "************ Contents of ${path}/${file} ramdisk log file bundle **************"

ironic-ipa-downloader-image/Dockerfile

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.1
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.1-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.0
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.0-%RELEASE%
 #!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
@@ -8,14 +8,7 @@ FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 FROM registry.suse.com/bci/bci-base:$SLE_VERSION AS base
 COPY --from=micro / /installroot/
 RUN sed -i -e 's%^# rpm.install.excludedocs = no.*%rpm.install.excludedocs = yes%g' /etc/zypp/zypp.conf
-#!ArchExclusiveLine: x86_64
-RUN if [ "$(uname -m)" = "x86_64" ];then \
-  zypper --installroot /installroot --non-interactive install --no-recommends ironic-ipa-ramdisk-x86_64 python311-devel python311 python311-pip tar gawk git curl xz fakeroot shadow sed cpio; zypper -n clean; rm -rf /var/log/*; \
-  fi
-#!ArchExclusiveLine: aarch64
-RUN if [ "$(uname -m)" = "aarch64" ];then \
-  zypper --installroot /installroot --non-interactive install --no-recommends ironic-ipa-ramdisk-aarch64 python311-devel python311 python311-pip tar gawk git curl xz fakeroot shadow sed cpio; zypper -n clean; rm -rf /var/log/*; \
-  fi
+RUN zypper --installroot /installroot --non-interactive install --no-recommends ironic-ipa-ramdisk-x86_64 python311-devel python311 python311-pip tar gawk git curl xz fakeroot shadow sed cpio; zypper -n clean; rm -rf /var/log/*
 #RUN zypper --installroot /installroot --non-interactive install --no-recommends sles-release;
 RUN cp /usr/bin/getopt /installroot/
 
@@ -26,11 +19,11 @@ FROM micro AS final
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE Based Ironic IPA Downloader Container Image"
 LABEL org.opencontainers.image.description="ironic-ipa-downloader based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="3.0.1"
+LABEL org.opencontainers.image.version="3.0.0"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic-ipa-downloader:3.0.1-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic-ipa-downloader:3.0.0-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"

ironic-ipa-downloader-image/_service

@@ -1,6 +1,12 @@
 <services>
   <service mode="buildtime" name="kiwi_metainfo_helper"/>
   <service mode="buildtime" name="docker_label_helper"/>
+  <service name="replace_using_package_version" mode="buildtime">
+    <param name="file">Dockerfile</param>
+    <param name="regex">%%ironic-ipa-ramdisk-x86_64_version%%</param>
+    <param name="package">ironic-ipa-ramdisk-x86_64</param>
+    <param name="parse-version">patch</param>
+  </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Dockerfile</param>
     <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>

ironic-ipa-downloader-image/get-resource.sh

@@ -8,10 +8,10 @@ export no_proxy=${no_proxy:-$NO_PROXY}
 
 # Which image should we use
 if [ -z "${IPA_BASEURI}" ]; then
-  # SLES BASED IPA - ironic-ipa-ramdisk-x86_64 package
+  # SLES BASED IPA - openstack-ironic-image-x86_64 package
   mkdir -p /shared/html/images
   cp /tmp/initrd.xz /shared/html/images/ironic-python-agent.initramfs
-  cp /tmp/openstack-ironic-image*.kernel /shared/html/images/ironic-python-agent.kernel
+  cp /tmp/openstack-ironic-image*.x86_64*.kernel /shared/html/images/ironic-python-agent.kernel
 else
   FILENAME=ironic-python-agent
   FILENAME_EXT=.tar

ironic-ipa-ramdisk/ironic-ipa-ramdisk.kiwi

@@ -1,5 +1,5 @@
 <?xml version="1.0" encoding="utf-8"?>
-<image schemaversion="7.4" name="openstack-ironic-image-301">
+<image schemaversion="7.4" name="openstack-ironic-image-201">
     <description type="system">
         <author>Cloud developers</author>
         <contact>cloud-devel@suse.de</contact>
@@ -116,9 +116,8 @@
         <package name="vim"/>
         <package name="grub2"/>
         <package name="grub2-x86_64-efi" arch="x86_64"/>
-        <package name="grub2-arm64-efi" arch="aarch64"/>
-        <package name="grub2-i386-pc" arch="x86_64"/>
-        <package name="syslinux" arch="x86_64"/>
+        <package name="grub2-i386-pc"/>
+        <package name="syslinux"/>
         <package name="lvm2"/>
         <package name="plymouth"/>
         <package name="fontconfig"/>
@@ -136,10 +135,12 @@
         <package name="openstack-ironic-python-agent"/>
         <package name="hdparm"/>
         <package name="qemu-tools"/>
-        <package name="python311-proliantutils"/>
+        <package name="python311-proliantutils" arch="x86_64"/>
         <package name="lshw"/>
-        <package name="dmidecode"/>
-        <package name="efibootmgr"/>
+        <package name="dmidecode" arch="aarch64"/>
+        <package name="dmidecode" arch="x86_64"/>
+        <package name="efibootmgr" arch="aarch64" />
+        <package name="efibootmgr" arch="x86_64" />
         <package name="gptfdisk"/>
         <package name="open-iscsi"/>
         <package name="hwinfo"/>
@@ -156,6 +157,7 @@
     </packages>
 
     <packages type="kis">
+        <package name="gfxboot-branding-SLE"/>
         <package name="dracut-kiwi-oem-repart"/>
         <package name="dracut-kiwi-oem-dump"/>
     </packages> 

ironic-ipa-ramdisk/ironic-ipa-ramdisk.spec

@@ -19,7 +19,7 @@
 
 
 Name:           ironic-ipa-ramdisk
-Version:        3.0.1
+Version:        3.0.0
 Release:        0
 Summary:        Kernel and ramdisk image for OpenStack Ironic
 License:        SUSE-EULA
@@ -49,12 +49,7 @@ BuildRequires:  fontconfig
 BuildRequires:  fonts-config
 BuildRequires:  gptfdisk
 BuildRequires:  grub2
-%ifarch x86_64
 BuildRequires:  grub2-x86_64-efi
-%endif
-%ifarch aarch64
-BuildRequires:  grub2-arm64-efi
-%endif
 BuildRequires:  haveged
 BuildRequires:  hdparm
 BuildRequires:  hwinfo
@@ -98,14 +93,19 @@ BuildRequires:  plymouth-dracut
 BuildRequires:  plymouth-theme-bgrt
 BuildRequires:  dracut-kiwi-oem-dump
 BuildRequires:  dracut-kiwi-oem-repart
+BuildRequires:  gfxboot-branding-SLE
 BuildRequires:  grub2-branding-SLE
 BuildRequires:  open-iscsi
 BuildRequires:  plymouth-branding-SLE
 BuildRequires:  lshw
 BuildRequires:  kbd
+%ifarch aarch64
 BuildRequires:  dmidecode
 BuildRequires:  efibootmgr
+%endif
 %ifarch x86_64
+BuildRequires:  dmidecode
+BuildRequires:  efibootmgr
 BuildRequires:  syslinux
 %endif
 

kiwi-builder-image/Dockerfile

@@ -1,20 +1,17 @@
-#!BuildTag: %%IMG_PREFIX%%kiwi-builder:%%kiwi_version%%.1-%RELEASE%
-#!BuildTag: %%IMG_PREFIX%%kiwi-builder:%%kiwi_version%%.1
-
-ARG KIWIVERSION="10.2.12"
-FROM registry.suse.com/bci/kiwi:${KIWIVERSION}
-ARG KIWIVERSION
+#!BuildTag: kiwi-builder:10.1
+FROM registry.suse.com/bci/kiwi:10.1.10
+MAINTAINER SUSE LLC (https://www.suse.com/)
 
 # Define labels according to https://en.opensuse.org/Building_derived_containers
 # labelprefix=com.suse.application.akri
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE Kiwi Builder Container Image"
 LABEL org.opencontainers.image.description="kiwi-builder based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="%%kiwi_version%%"
+LABEL org.opencontainers.image.version="%PACKAGE_VERSION%"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%kiwi-builder:%%kiwi_version%%.1-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%kiwi-builder:10.1"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"
@@ -23,8 +20,12 @@ LABEL com.suse.image-type="application"
 LABEL com.suse.release-stage="released"
 # endlabelprefix
 
-# help the build service understand the need for python3-kiwi
-RUN zypper -n install -d -D python3-kiwi; [ "%%kiwi_version%%" = "${KIWIVERSION}" ] || { echo "expected kiwi version ${KIWIVERSION}: version mismatch"; exit 1; }
+# Install required packages for Kiwi to function as expected
+# Should be provided via https://github.com/SUSE/BCI-dockerfile-generator/pull/1770
+# RUN zypper in -y gawk && zypper clean -a
+
+# Configure Kiwi to use kpartx
+RUN echo -e "mapper:\n  - part_mapper: kpartx" > /etc/kiwi.yml
 
 # Copy build script into image and make it executable
 ADD build-image.sh /usr/bin/build-image

kiwi-builder-image/README

@@ -8,48 +8,40 @@ Please ensure that you're running this on a registered SLE Micro 6.0 system, and
 
 Next, download the podman image:
 
-# podman pull %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1
+# podman pull %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10
 
 Make a local output directory (where the images will reside):
 
 # mkdir output
 
-Then, to build a standard "Base" image, run the following in podman:
-
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image
-
-To build a "Base" SelfInstall ISO, you can add additional flags, for example:
-
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image -p Base-SelfInstall
-
 Then, to build a standard "Default" image, run the following in podman:
 
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image -p Default
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10 build-image
 
-To build a "Default" SelfInstall ISO, you can add additional flags, for example:
+To build a SelfInstall ISO, you can add additional flags, for example:
 
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image -p Default-SelfInstall
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10 build-image -p Default-SelfInstall
 
 To build an image with a RealTime kernel, e.g. a RAW disk image ("Default"), use the following:
 
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image -p Base-RT
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10 build-image -p Base-RT
 
 To build an image that supports a large block/sectorsize (4096), use the "-b" flag, for example:
 
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image -p Default-SelfInstall -b
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10 build-image -p Default-SelfInstall -b
 
 # mkdir mydefs/
 # cp /path/to/SL-Micro.kiwi mydefs/
 # cp /path/to/config.sh mydefs/
-# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -v ./mydefs/:/micro-sdk/defs/ -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:%%kiwi_version%%.1 build-image
+# podman run --privileged -v /etc/zypp/repos.d:/micro-sdk/repos/ -v ./output:/tmp/output -v ./mydefs/:/micro-sdk/defs/ -it %%IMG_REPO%%/%%IMG_PREFIXkiwi-builder:10 build-image
 
 All output will be in the local $(pwd)/output directory, for example:
 
 # ls -1 output/
-SL-Micro.x86_64-6.0.changes
-SL-Micro.x86_64-6.0.packages
-SL-Micro.x86_64-6.0.raw
-SL-Micro.x86_64-6.0.verified
+SLE-Micro.x86_64-6.0.changes
+SLE-Micro.x86_64-6.0.packages
+SLE-Micro.x86_64-6.0.raw
+SLE-Micro.x86_64-6.0.verified
 build
 kiwi.result
 kiwi.result.json

kiwi-builder-image/_service

@@ -16,14 +16,4 @@
     <param name="eval">SUPPORT_LEVEL=$(rpm --macros=/root/.rpmmacros -E %support_level)</param>
     <param name="var">SUPPORT_LEVEL</param>
   </service>
-  <service mode="buildtime" name="replace_using_package_version">
-    <param name="file">Dockerfile</param>
-    <param name="regex">%%kiwi_version%%</param>
-    <param name="package">python3-kiwi</param>
-  </service>
-  <service mode="buildtime" name="replace_using_package_version">
-    <param name="file">README</param>
-    <param name="regex">%%kiwi_version%%</param>
-    <param name="package">python3-kiwi</param>
-  </service>
 </services>

kiwi-builder-image/build-image.sh

@@ -21,7 +21,7 @@
 #
 
 # Set image build defaults, blocksize is an empty string
-PROFILE="Base"
+PROFILE="Default"
 LARGEBLOCK=false
 
 # Print usage
@@ -34,16 +34,14 @@ usage(){
 	Usage: ${0} [-p <profile>] [-b]
 
 	Profile Options (-p):
-  * Base: RAW Disk Image with podman
-  * Base-SelfInstall: SelfInstall ISO with podman
-  * Default: RAW Disk Image with podman and kvm
-  * Default-SelfInstall: SelfInstall ISO with podman and kvm
+	* Default: RAW Disk Image with kernel-default
+	* Default-SelfInstall: SelfInstall ISO with kernel-default
 	* Base-RT: RAW Disk Image with kernel-rt
 	* Base-RT-SelfInstall: SelfInstall ISO with kernel-rt
 
 	4096 Blocksize (-b): If specified, use a 4096 blocksize (rather than 512) when generating the image.
 
-  NOTE: If both options are omitted, the "Base" profile with a standard "512" blocksize is used.
+	NOTE: If both options are omitted, the "Default" profile with a standard "512" blocksize is used.
 	EOF
 }
 

kube-rbac-proxy/_service

@@ -12,8 +12,10 @@
     <param name="without-version">yes</param>
     <param name="versionrewrite-replacement">\1</param>
   </service>
-  <service mode="buildtime" name="tar" >
-    <param name="obsinfo">kube-rbac-proxy.obsinfo</param>
+  <service mode="buildtime" name="tar" />
+  <service mode="buildtime" name="recompress">
+    <param name="file">*.tar</param>
+    <param name="compression">gz</param>
   </service>
   <service name="go_modules">
   </service>

kube-rbac-proxy/kube-rbac-proxy.spec

@@ -22,7 +22,7 @@ Release:        0.18.1
 Summary:        The kube-rbac-proxy is a small HTTP proxy for a single upstream
 License:        Apache-2.0
 URL:            https://github.com/brancz/kube-rbac-proxy
-Source:         kube-rbac-proxy-%{version}.tar
+Source:         kube-rbac-proxy-%{version}.tar.gz
 Source1:        vendor.tar.gz
 BuildRequires:  golang(API) = 1.23
 ExcludeArch:    s390

kubectl-image/Dockerfile

@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%kubectl:1.30.3
-#!BuildTag: %%IMG_PREFIX%%kubectl:1.30.3-%RELEASE%
-#!BuildVersion: 15.6
-ARG SLE_VERSION
-FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
-
-FROM registry.suse.com/bci/bci-base:$SLE_VERSION AS base
-COPY --from=micro / /installroot/
-RUN zypper --installroot /installroot --non-interactive install --no-recommends kubectl; zypper -n clean; rm -rf /var/log/*
-
-FROM micro AS final
-
-# Define labels according to https://en.opensuse.org/Building_derived_containers
-# labelprefix=com.suse.application.kubectl
-LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
-LABEL org.opencontainers.image.title="SLE kubectl image"
-LABEL org.opencontainers.image.description="kubectl on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="1.30.3"
-LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
-LABEL org.opencontainers.image.created="%BUILDTIME%"
-LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%kubectl:1.30.3-%RELEASE%"
-LABEL org.openbuildservice.disturl="%DISTURL%"
-LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
-LABEL com.suse.eula="SUSE Combined EULA February 2024"
-LABEL com.suse.lifecycle-url="https://www.suse.com/lifecycle"
-LABEL com.suse.image-type="application"
-LABEL com.suse.release-stage="released"
-# endlabelprefix
-
-COPY --from=base /installroot /
-
-ENTRYPOINT ["/usr/bin/kubectl"]

kubectl-image/_service

@@ -1,12 +0,0 @@
-<services>
-  <service mode="buildtime" name="kiwi_metainfo_helper"/>
-  <service name="replace_using_env" mode="buildtime">
-    <param name="file">Dockerfile</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
-    <param name="eval">IMG_REPO=$(rpm --macros=/root/.rpmmacros -E %img_repo)</param>
-    <param name="var">IMG_REPO</param>
-    <param name="eval">SUPPORT_LEVEL=$(rpm --macros=/root/.rpmmacros -E %support_level)</param>
-    <param name="var">SUPPORT_LEVEL</param>
-  </service>
-</services>

kubectl/kubectl.spec

@@ -1,6 +1,6 @@
 %global debug_package %{nil}
 
-Name: kubectl
+Name: kubectl-1303
 Version: 1.30.3
 Release: 0
 Summary: Command-line utility for interacting with a Kubernetes cluster

kubevirt-chart/Chart.yaml

@@ -1,9 +0,0 @@
-#!BuildTag: %%IMG_PREFIX%%kubevirt-chart:%%CHART_MAJOR%%.0.0_up0.4.0-%RELEASE%
-#!BuildTag: %%IMG_PREFIX%%kubevirt-chart:%%CHART_MAJOR%%.0.0_up0.4.0
-apiVersion: v2
-appVersion: 1.3.1
-description: A Helm chart for KubeVirt
-icon: https://raw.githubusercontent.com/cncf/artwork/main/projects/kubevirt/icon/color/kubevirt-icon-color.svg
-name: kubevirt
-type: application
-version: "%%CHART_MAJOR%%.0.0+up0.4.0"

kubevirt-chart/_service

@@ -1,10 +0,0 @@
-<services>
-  <service mode="buildtime" name="kiwi_metainfo_helper"/>
-  <service name="replace_using_env" mode="buildtime">
-    <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
-    <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
-    <param name="var">CHART_MAJOR</param>
-  </service>
-</services>

kubevirt-chart/app-readme.md

@@ -1 +0,0 @@
-KubeVirt is a virtual machine management add-on for Kubernetes. The aim is to provide a common ground for virtualization solutions on top of Kubernetes.

kubevirt-chart/templates/NOTES.txt

@@ -1,2 +0,0 @@
-Verify that all KubeVirt components are installed correctly:
-  kubectl get all -n {{ .Release.Namespace }}

kubevirt-chart/templates/_helpers.tpl

@@ -1,62 +0,0 @@
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "kubevirt.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
-{{- end }}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "kubevirt.fullname" -}}
-{{- if .Values.fullnameOverride }}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
-{{- else }}
-{{- $name := default .Chart.Name .Values.nameOverride }}
-{{- if contains $name .Release.Name }}
-{{- .Release.Name | trunc 63 | trimSuffix "-" }}
-{{- else }}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" }}
-{{- end }}
-{{- end }}
-{{- end }}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "kubevirt.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
-{{- end }}
-
-{{/*
-Common labels
-*/}}
-{{- define "kubevirt.labels" -}}
-helm.sh/chart: {{ include "kubevirt.chart" . }}
-{{ include "kubevirt.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end }}
-
-{{/*
-Selector labels
-*/}}
-{{- define "kubevirt.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "kubevirt.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end }}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "kubevirt.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create }}
-{{- default (include "kubevirt.fullname" .) .Values.serviceAccount.name }}
-{{- else }}
-{{- default "default" .Values.serviceAccount.name }}
-{{- end }}
-{{- end }}

kubevirt-chart/templates/_hooks.tpl

@@ -1,47 +0,0 @@
-{{/* Hook annotations */}}
-{{- define "kubevirt.hook.annotations" -}}
-  annotations:
-    "helm.sh/hook": {{ .hookType }}
-    "helm.sh/hook-delete-policy": before-hook-creation,hook-succeeded
-    "helm.sh/hook-weight": {{ .hookWeight | quote }}
-{{- end -}}
-
-{{/* Namespace modifying hook annotations */}}
-{{- define "kubevirt.namespaceHook.annotations" -}}
-{{ template "kubevirt.hook.annotations" merge (dict "hookType" "pre-install") . }}
-{{- end -}}
-
-{{/* CRD upgrading hook annotations */}}
-{{- define "kubevirt.crdUpgradeHook.annotations" -}}
-{{ template "kubevirt.hook.annotations" merge (dict "hookType" "pre-upgrade") . }}
-{{- end -}}
-
-{{/* Custom resource uninstalling hook annotations */}}
-{{- define "kubevirt.crUninstallHook.annotations" -}}
-{{ template "kubevirt.hook.annotations" merge (dict "hookType" "pre-delete") . }}
-{{- end -}}
-
-{{/* CRD uninstalling hook annotations */}}
-{{- define "kubevirt.crdUninstallHook.annotations" -}}
-{{ template "kubevirt.hook.annotations" merge (dict "hookType" "post-delete") . }}
-{{- end -}}
-
-{{/* Namespace modifying hook name */}}
-{{- define "kubevirt.namespaceHook.name" -}}
-{{ include "kubevirt.fullname" . }}-namespace-modify
-{{- end }}
-
-{{/* CRD upgrading hook name */}}
-{{- define "kubevirt.crdUpgradeHook.name" -}}
-{{ include "kubevirt.fullname" . }}-crd-upgrade
-{{- end }}
-
-{{/* Custom resource uninstalling hook name */}}
-{{- define "kubevirt.crUninstallHook.name" -}}
-{{ include "kubevirt.fullname" . }}-uninstall
-{{- end }}
-
-{{/* CRD uninstalling hook name */}}
-{{- define "kubevirt.crdUninstallHook.name" -}}
-{{ include "kubevirt.fullname" . }}-crd-uninstall
-{{- end }}

kubevirt-chart/templates/crd-uninstall-hooks.yaml

@@ -1,55 +0,0 @@
-apiVersion: v1
-kind: ServiceAccount
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: {{ template "kubevirt.crdUninstallHook.name" . }}
-  {{ template "kubevirt.crdUninstallHook.annotations" (dict "hookWeight" 1) }}
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: ClusterRole
-metadata:
-  name: {{ template "kubevirt.crdUninstallHook.name" . }}
-  {{ template "kubevirt.crdUninstallHook.annotations" (dict "hookWeight" 1) }}
-rules:
-  - apiGroups: [ "apiextensions.k8s.io" ]
-    resources: [ "customresourcedefinitions" ]
-    resourceNames:
-      - "kubevirts.kubevirt.io"
-    verbs: [ "delete" ]
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: ClusterRoleBinding
-metadata:
-  name: {{ template "kubevirt.crdUninstallHook.name" . }}
-  {{ template "kubevirt.crdUninstallHook.annotations" (dict "hookWeight" 2) }}
-subjects:
-  - kind: ServiceAccount
-    namespace: {{ .Release.Namespace }}
-    name: {{ template "kubevirt.crdUninstallHook.name" . }}
-roleRef:
-  kind: ClusterRole
-  name: {{ template "kubevirt.crdUninstallHook.name" . }}
-  apiGroup: rbac.authorization.k8s.io
----
-apiVersion: batch/v1
-kind: Job
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: {{ template "kubevirt.crdUninstallHook.name" . }}
-  {{ template "kubevirt.crdUninstallHook.annotations" (dict "hookWeight" 3) }}
-spec:
-  template:
-    metadata:
-      name: {{ template "kubevirt.crdUninstallHook.name" . }}
-    spec:
-      serviceAccountName: {{ template "kubevirt.crdUninstallHook.name" . }}
-      restartPolicy: {{ .Values.hookRestartPolicy }}
-      containers:
-        - name: {{ template "kubevirt.crdUninstallHook.name" . }}
-          image: {{ .Values.hookImage }}
-          args:
-            - delete
-            - customresourcedefinitions
-            - kubevirts.kubevirt.io
-          securityContext:
-            {{- toYaml .Values.hookSecurityContext | nindent 12 }}

kubevirt-chart/templates/crd-upgrade-hooks.yaml

@@ -1,80 +0,0 @@
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: kubevirt-crd-manifest
-  {{ template "kubevirt.crdUpgradeHook.annotations" (dict "hookWeight" 1) }}
-data:
-  crd: |-
-    {{ $.Files.Get "crds/kubevirt.yaml" | nindent 4 }}
----
-apiVersion: v1
-kind: ServiceAccount
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: {{ template "kubevirt.crdUpgradeHook.name" . }}
-  {{ template "kubevirt.crdUpgradeHook.annotations" (dict "hookWeight" 2) }}
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: ClusterRole
-metadata:
-  name: {{ template "kubevirt.crdUpgradeHook.name" . }}
-  {{ template "kubevirt.crdUpgradeHook.annotations" (dict "hookWeight" 2) }}
-rules:
-  - apiGroups: [ "" ]
-    resources: [ "configmaps" ]
-    resourceNames:
-      - "kubevirt-crd-manifest"
-    verbs: [ "get" ]
-  - apiGroups: [ "apiextensions.k8s.io" ]
-    resources: [ "customresourcedefinitions" ]
-    resourceNames:
-      - "kubevirts.kubevirt.io"
-    verbs: [ "get", "patch" ]
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: ClusterRoleBinding
-metadata:
-  name: {{ template "kubevirt.crdUpgradeHook.name" . }}
-  {{ template "kubevirt.crdUpgradeHook.annotations" (dict "hookWeight" 3) }}
-subjects:
-  - kind: ServiceAccount
-    namespace: {{ .Release.Namespace }}
-    name: {{ template "kubevirt.crdUpgradeHook.name" . }}
-roleRef:
-  kind: ClusterRole
-  name: {{ template "kubevirt.crdUpgradeHook.name" . }}
-  apiGroup: rbac.authorization.k8s.io
----
-apiVersion: batch/v1
-kind: Job
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: {{ template "kubevirt.crdUpgradeHook.name" . }}
-  {{ template "kubevirt.crdUpgradeHook.annotations" (dict "hookWeight" 4) }}
-spec:
-  template:
-    metadata:
-      name: {{ template "kubevirt.crdUpgradeHook.name" . }}
-    spec:
-      serviceAccountName: {{ template "kubevirt.crdUpgradeHook.name" . }}
-      restartPolicy: {{ .Values.hookRestartPolicy }}
-      containers:
-        - name: {{ template "kubevirt.crdUpgradeHook.name" . }}
-          securityContext:
-            {{- toYaml .Values.hookSecurityContext | nindent 12 }}
-          image: {{ .Values.hookImage }}
-          args:
-            - apply
-            - -f
-            - /etc/manifests/crd.yaml
-          volumeMounts:
-            - name: crd-volume
-              mountPath: /etc/manifests
-      volumes:
-        - name: crd-volume
-          configMap:
-            name: kubevirt-crd-manifest
-            items:
-              - key: crd
-                path: crd.yaml

kubevirt-chart/templates/kubevirt-uninstall-hooks.yaml

@@ -1,71 +0,0 @@
-apiVersion: v1
-kind: ServiceAccount
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: {{ template "kubevirt.crUninstallHook.name" . }}
-  {{ template "kubevirt.crUninstallHook.annotations" (dict "hookWeight" 1) }}
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: Role
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: {{ template "kubevirt.crUninstallHook.name" . }}
-  {{ template "kubevirt.crUninstallHook.annotations" (dict "hookWeight" 1) }}
-rules:
-  - apiGroups: [ "kubevirt.io" ]
-    resources: [ "kubevirts" ]
-    resourceNames:
-      - "kubevirt"
-    verbs: [ "get", "list", "delete" ]
-  - apiGroups: [ "apps" ]
-    resources: [ "deployments", "daemonsets" ]
-    verbs: [ "get", "list" ]
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: RoleBinding
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: {{ template "kubevirt.crUninstallHook.name" . }}
-  {{ template "kubevirt.crUninstallHook.annotations" (dict "hookWeight" 2) }}
-subjects:
-  - kind: ServiceAccount
-    namespace: {{ .Release.Namespace }}
-    name: {{ template "kubevirt.crUninstallHook.name" . }}
-roleRef:
-  kind: Role
-  name: {{ template "kubevirt.crUninstallHook.name" . }}
-  apiGroup: rbac.authorization.k8s.io
----
-apiVersion: batch/v1
-kind: Job
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: {{ template "kubevirt.crUninstallHook.name" . }}
-  {{ template "kubevirt.crUninstallHook.annotations" (dict "hookWeight" 3) }}
-spec:
-  template:
-    metadata:
-      name: {{ template "kubevirt.crUninstallHook.name" . }}
-    spec:
-      serviceAccountName: {{ template "kubevirt.crUninstallHook.name" . }}
-      restartPolicy: {{ .Values.hookRestartPolicy }}
-      containers:
-        - name: {{ template "kubevirt.crUninstallHook.name" . }}
-          image: {{ .Values.hookImage }}
-          securityContext:
-            {{- toYaml .Values.hookSecurityContext | nindent 12 }}
-          args:
-            - delete
-            - kubevirt
-            - kubevirt
-        - name: {{ template "kubevirt.crUninstallHook.name" . }}-cleanup
-          image: {{ .Values.hookImage }}
-          securityContext:
-            {{- toYaml .Values.hookSecurityContext | nindent 12 }}
-          args:
-            - wait
-            - --for=delete
-            - deployments/virt-api
-            - deployments/virt-controller
-            - daemonsets/virt-handler
-            - --timeout=60s

kubevirt-chart/templates/kubevirt.yaml

@@ -1,32 +0,0 @@
-apiVersion: kubevirt.io/v1
-kind: KubeVirt
-metadata:
-  name: kubevirt
-  namespace: {{ .Release.Namespace }}
-spec:
-  {{- with .Values.kubevirt.configuration }}
-  configuration:
-  {{- toYaml . | nindent 4 }}
-  {{- end }}
-  {{- with .Values.kubevirt.customizeComponents }}
-  customizeComponents:
-  {{- toYaml . | nindent 4 }}
-  {{- end }}
-  imagePullPolicy: {{ .Values.kubevirt.imagePullPolicy }}
-  {{- with .Values.kubevirt.infra }}
-  infra:
-  {{- toYaml . | nindent 4 }}
-  {{- end }}
-  {{- if .Values.kubevirt.uninstallStrategy }}
-  uninstallStrategy: {{ .Values.kubevirt.uninstallStrategy }}
-  {{- end }}
-  {{- with .Values.kubevirt.workloadUpdateStrategy }}
-  workloadUpdateStrategy:
-  {{- toYaml . | nindent 4 }}
-  {{- end }}
-  {{- if .Values.kubevirt.monitorNamespace }}
-  monitorNamespace: {{ .Values.kubevirt.monitorNamespace }}
-  {{- end }}
-  {{- if .Values.kubevirt.monitorAccount }}
-  monitorAccount: {{ .Values.kubevirt.monitorAccount }}
-  {{- end }}

kubevirt-chart/templates/namespace-hooks.yaml

@@ -1,60 +0,0 @@
-apiVersion: v1
-kind: ServiceAccount
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: {{ template "kubevirt.namespaceHook.name" . }}
-  {{ template "kubevirt.namespaceHook.annotations" (dict "hookWeight" 1) }}
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: ClusterRole
-metadata:
-  name: {{ template "kubevirt.namespaceHook.name" . }}
-  {{ template "kubevirt.namespaceHook.annotations" (dict "hookWeight" 1) }}
-rules:
-  - apiGroups: [ "" ]
-    resources: [ "namespaces" ]
-    resourceNames:
-      - {{ .Release.Namespace | quote }}
-    verbs: [ "get", "patch" ]
-  - apiGroups: [ "management.cattle.io" ] # Rancher
-    resources: [ "projects" ]
-    verbs: [ "updatepsa" ]
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: ClusterRoleBinding
-metadata:
-  name: {{ template "kubevirt.namespaceHook.name" . }}
-  {{ template "kubevirt.namespaceHook.annotations" (dict "hookWeight" 2) }}
-subjects:
-  - kind: ServiceAccount
-    namespace: {{ .Release.Namespace }}
-    name: {{ template "kubevirt.namespaceHook.name" . }}
-roleRef:
-  kind: ClusterRole
-  name: {{ template "kubevirt.namespaceHook.name" . }}
-  apiGroup: rbac.authorization.k8s.io
----
-apiVersion: batch/v1
-kind: Job
-metadata:
-  namespace: {{ .Release.Namespace }}
-  name: {{ template "kubevirt.namespaceHook.name" . }}
-  {{ template "kubevirt.namespaceHook.annotations" (dict "hookWeight" 3) }}
-spec:
-  template:
-    metadata:
-      name: {{ template "kubevirt.namespaceHook.name" . }}
-    spec:
-      serviceAccountName: {{ template "kubevirt.namespaceHook.name" . }}
-      restartPolicy: {{ .Values.hookRestartPolicy }}
-      containers:
-        - name: {{ template "kubevirt.namespaceHook.name" . }}
-          securityContext:
-            {{- toYaml .Values.hookSecurityContext | nindent 12 }}
-          image: {{ .Values.hookImage }}
-          args:
-            - label
-            - namespace
-            - {{ .Release.Namespace }}
-            - kubevirt.io=
-            - pod-security.kubernetes.io/enforce=privileged

kubevirt-chart/values.yaml

@@ -1,34 +0,0 @@
-operator:
-  image: registry.suse.com/suse/sles/15.6/virt-operator
-  version: 1.3.1-150600.5.9.1
-  pullPolicy: IfNotPresent
-
-kubevirt:
-  # Holds kubevirt configurations. Same as the virt-configMap.
-  configuration: {}
-  customizeComponents: {}
-  # The ImagePullPolicy to use.
-  imagePullPolicy: IfNotPresent
-  # Selectors and tolerations that should apply to KubeVirt infrastructure components.
-  infra: {}
-  # Specifies if KubeVirt can be deleted if workloads are still present.
-  # This is mainly a precaution to avoid accidental data loss.
-  uninstallStrategy: ""
-  # WorkloadUpdateStrategy defines at the cluster level how to handle automated workload updates.
-  workloadUpdateStrategy: {}
-  # Optionally enable ServiceMonitor for prometheus, see
-  # https://kubevirt.io/user-guide/user_workloads/component_monitoring/
-  monitorAccount: ""
-  monitorNamespace: ""
-
-hookImage: rancher/kubectl:v1.30.2
-hookRestartPolicy: OnFailure
-hookSecurityContext:
-  seccompProfile:
-    type: RuntimeDefault
-  runAsNonRoot: true
-  runAsUser: 1000
-  allowPrivilegeEscalation: false
-  capabilities:
-    drop:
-      - ALL

kubevirt-dashboard-extension-chart/Chart.yaml

@@ -1,6 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%kubevirt-dashboard-extension-chart:%%CHART_MAJOR%%.0.0
-#!BuildTag: %%IMG_PREFIX%%kubevirt-dashboard-extension-chart:%%CHART_MAJOR%%.0.0_up1.2.1
-#!BuildTag: %%IMG_PREFIX%%kubevirt-dashboard-extension-chart:%%CHART_MAJOR%%.0.0_up1.2.1-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%kubevirt-dashboard-extension-chart:1.2.0
+#!BuildTag: %%IMG_PREFIX%%kubevirt-dashboard-extension-chart:1.2.0-%RELEASE%
 annotations:
   catalog.cattle.io/certified: rancher
   catalog.cattle.io/display-name: KubeVirt
@@ -11,12 +10,11 @@ annotations:
   catalog.cattle.io/rancher-version: '>= 2.10.0-0'
   catalog.cattle.io/scope: management
   catalog.cattle.io/ui-component: plugins
-  catalog.cattle.io/ui-extensions-version: ">= 3.0.0 < 4.0.0"
+  catalog.cattle.io/ui-extensions-version: '>= 3.0.0'
 apiVersion: v2
-appVersion: 302.0.0+up1.2.1
+appVersion: 1.2.0
 description: 'SUSE Edge: KubeVirt extension for Rancher Dashboard'
+icon: https://raw.githubusercontent.com/cncf/artwork/master/projects/kubevirt/icon/color/kubevirt-icon-color.svg
 name: kubevirt-dashboard-extension
 type: application
-version: "%%CHART_MAJOR%%.0.0+up1.2.1"
-icon: >-
-  https://raw.githubusercontent.com/cncf/artwork/master/projects/kubevirt/icon/color/kubevirt-icon-color.svg
+version: 1.2.0

kubevirt-dashboard-extension-chart/_service

@@ -11,7 +11,5 @@
     <param name="file">Chart.yaml</param>
     <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
     <param name="var">IMG_PREFIX</param>
-    <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
-    <param name="var">CHART_MAJOR</param>
   </service>
 </services>

kubevirt-dashboard-extension-chart/templates/_helpers.tpl

@@ -38,7 +38,7 @@ Common labels
 helm.sh/chart: {{ include "extension-server.chart" . }}
 {{ include "extension-server.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | replace "+" "_" | quote }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
 app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{- end }}

kubevirt-dashboard-extension-chart/templates/cr.yaml

@@ -8,7 +8,7 @@ spec:
   plugin:
     name: {{ include "extension-server.fullname" . }}
     version: {{ (semver (default .Chart.AppVersion .Values.plugin.versionOverride)).Original }}
-    endpoint: https://raw.githubusercontent.com/suse-edge/dashboard-extensions/gh-pages/extensions/kubevirt-dashboard-extension/302.0.0+up1.2.1
+    endpoint: https://raw.githubusercontent.com/suse-edge/dashboard-extensions/gh-pages/extensions/kubevirt-dashboard-extension/1.2.0
     noCache: {{ .Values.plugin.noCache }}
     noAuth: {{ .Values.plugin.noAuth }}
     metadata: {{ include "extension-server.pluginMetadata" . | indent 6 }}

kubevirt-dashboard-extension-chart/values.yaml

@@ -8,5 +8,5 @@ plugin:
   metadata:
     catalog.cattle.io/display-name: KubeVirt
     catalog.cattle.io/rancher-version: ">= 2.10.0-0"
-    catalog.cattle.io/ui-extensions-version: ">= 3.0.0 < 4.0.0"
+    catalog.cattle.io/ui-extensions-version: ">= 3.0.0"
     catalog.cattle.io/kube-version: ">= v1.26.0-0"

metal3-chart/Chart.yaml

@@ -1,16 +1,16 @@
-#!BuildTag: %%IMG_PREFIX%%metal3-chart:%%CHART_MAJOR%%.0.1_up0.9.4
-#!BuildTag: %%IMG_PREFIX%%metal3-chart:%%CHART_MAJOR%%.0.1_up0.9.4-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%metal3-chart:302.0.0_up0.9.0
+#!BuildTag: %%IMG_PREFIX%%metal3-chart:302.0.0_up0.9.0-%RELEASE%
 apiVersion: v2
-appVersion: 0.9.4
+appVersion: 0.9.0
 dependencies:
 - alias: metal3-baremetal-operator
   name: baremetal-operator
   repository: file://./charts/baremetal-operator
-  version: 0.6.1
+  version: 0.6.0
 - alias: metal3-ironic
   name: ironic
   repository: file://./charts/ironic
-  version: 0.9.3
+  version: 0.8.0
 - alias: metal3-mariadb
   condition: global.enable_mariadb
   name: mariadb
@@ -20,9 +20,9 @@ dependencies:
   condition: global.enable_metal3_media_server
   name: media
   repository: file://./charts/media
-  version: 0.6.1
+  version: 0.6.0
 description: A Helm chart that installs all of the dependencies needed for Metal3
 icon: https://github.com/cncf/artwork/raw/master/projects/metal3/icon/color/metal3-icon-color.svg
 name: metal3
 type: application
-version: "%%CHART_MAJOR%%.0.1+up0.9.4"
+version: 302.0.0+up0.9.0

metal3-chart/_service

@@ -11,7 +11,5 @@
     <param name="file">Chart.yaml</param>
     <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
     <param name="var">IMG_PREFIX</param>
-    <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
-    <param name="var">CHART_MAJOR</param>
   </service>
 </services>

metal3-chart/charts/baremetal-operator/Chart.yaml

@@ -3,4 +3,4 @@ appVersion: 0.8.0
 description: A Helm chart for baremetal-operator, used by Metal3
 name: baremetal-operator
 type: application
-version: 0.6.1
+version: 0.6.0