Update versions for metal3-chart

Signed-off-by: Nicolas Belouin <nicolas.belouin@suse.com>

.gitignore

@@ -1,3 +1,4 @@
 */.osc
 */__pycache__
-.venv/
+.venv/
+.idea/

_config

@@ -60,6 +60,7 @@ BuildFlags: onlybuild:release-manifest-image
     BuildFlags: excludebuild:endpoint-copier-operator-image
     BuildFlags: excludebuild:ironic-image
     BuildFlags: excludebuild:ironic-ipa-downloader-image
+    BuildFlags: excludebuild:kiwi-builder-image
     BuildFlags: excludebuild:kubectl-image
     BuildFlags: excludebuild:kube-rbac-proxy-image
     BuildFlags: excludebuild:metallb-controller-image
@@ -149,6 +150,10 @@ BuildFlags: onlybuild:release-manifest-image
 %else
     %if "%{sub %{reverse %_project} 1 7}" != "%{reverse :ToTest}" && "%{sub %{reverse %_project} 1 9}" != "%{reverse :Snapshot}"
       BuildFlags: excludebuild:kiwi-builder-image
+    %else
+      %ifarch aarch64
+        BuildFlags: onlybuild:kiwi-builder-image
+      %endif
     %endif
 %endif
 

akri-dashboard-extension-chart/Chart.yaml

@@ -1,4 +1,3 @@
-#!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2
 #!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.1
 #!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.1-%RELEASE%
 annotations:

edge-image-builder-image/Dockerfile

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.0.1
-#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.0.1-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.1
+#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.1-%RELEASE%
 #!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-base:$SLE_VERSION
@@ -15,11 +15,11 @@ RUN zypper --non-interactive install --no-recommends edge-image-builder qemu-x86
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE edge-image-builder Container Image"
 LABEL org.opencontainers.image.description="edge-image-builder based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="1.2.0"
+LABEL org.opencontainers.image.version="1.2.1"
 LABEL org.opencontainers.image.url="https://www.suse.com/products/server/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%edge-image-builder:1.2.0.1-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%edge-image-builder:1.2.1-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"

edge-image-builder-image/artifacts.yaml

@@ -5,7 +5,7 @@ metallb:
 endpoint-copier-operator:
   chart: endpoint-copier-operator
   repository: "%%CHART_REPO%%/%%CHART_PREFIX%%"
-  version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+  version: "%%CHART_MAJOR%%.0.1+up0.3.0"
 kubernetes:
   k3s:
     selinuxPackage: k3s-selinux-1.6-1.slemicro.noarch

edge-image-builder/_service

@@ -3,7 +3,7 @@
     <param name="url">https://github.com/suse-edge/edge-image-builder.git</param>
     <param name="scm">git</param>
     <param name="exclude">.git</param>
-    <param name="revision">v1.2.0</param>
+    <param name="revision">v1.2.1</param>
     <!-- Uncomment and set this For Pre-Release Version -->
     <!-- <param name="version">1.2.0~rc1</param> -->
     <!-- Uncomment and this for regular version -->

edge-image-builder/edge-image-builder.spec

@@ -17,7 +17,7 @@
 
 
 Name:           edge-image-builder
-Version:        1.2.0
+Version:        1.2.1
 Release:        0
 Summary:        Edge Image Builder
 License:        Apache-2.0

endpoint-copier-operator-chart/Chart.yaml

@@ -1,8 +1,8 @@
-#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.0_up0.2.1
-#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.0_up0.2.1-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.1_up0.3.0
+#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.1_up0.3.0-%RELEASE%
 apiVersion: v2
-appVersion: v0.2.0
+appVersion: v0.3.0
 description: A Helm chart for Kubernetes
 name: endpoint-copier-operator
 type: application
-version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+version: "%%CHART_MAJOR%%.0.1+up0.3.0"

endpoint-copier-operator-chart/templates/deployment.yaml

@@ -20,8 +20,23 @@ spec:
       labels:
         {{- include "endpoint-copier-operator.selectorLabels" . | nindent 8 }}
     spec:
+      {{- if .Values.priorityClassName }}
+      priorityClassName: {{ .Values.priorityClassName }}
+      {{- end }}
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
       containers:
       - command:
         - /manager

endpoint-copier-operator-chart/templates/rbac/role.yaml

@@ -7,9 +7,9 @@ metadata:
   name: {{ include "endpoint-copier-operator.fullname" . }}
 rules:
 - apiGroups:
-  - ""
+  - "discovery.k8s.io"
   resources:
-  - endpoints
+  - endpointslices
   verbs:
   - create
   - delete

endpoint-copier-operator-chart/values.yaml

@@ -8,7 +8,7 @@ image:
   repository: %%IMG_REPO%%/%%IMG_PREFIX%%endpoint-copier-operator
   pullPolicy: IfNotPresent
   # Overrides the image tag whose default is the chart appVersion.
-  tag: "0.2.0"
+  tag: "0.3.0"
 
 nameOverride: "endpoint-copier-operator"
 fullnameOverride: "endpoint-copier-operator"
@@ -29,6 +29,8 @@ podSecurityContext:
   seccompProfile:
     type: RuntimeDefault
 
+priorityClassName: "system-cluster-critical"
+
 securityContext:
   allowPrivilegeEscalation: false
   capabilities:
@@ -37,11 +39,11 @@ securityContext:
 
 resources:
   limits:
-    cpu: 500m
-    memory: 128Mi
-  requests:
-    cpu: 10m
+    cpu: 100m
     memory: 64Mi
+  requests:
+    cpu: 5m
+    memory: 32Mi
 
 autoscaling:
   enabled: false

endpoint-copier-operator/_service

@@ -2,7 +2,7 @@
  <service name="obs_scm">
     <param name="url">https://github.com/suse-edge/endpoint-copier-operator</param>
     <param name="scm">git</param>
-    <param name="revision">v0.2.0</param>
+    <param name="revision">v0.3.0</param>
     <param name="version">_auto_</param>
     <param name="versionformat">@PARENT_TAG@</param>
     <param name="changesgenerate">enable</param>

endpoint-copier-operator/endpoint-copier-operator.spec

@@ -17,14 +17,14 @@
 
 
 Name:           endpoint-copier-operator
-Version:        0.2.0
-Release:        0.2.0
+Version:        0.3.0
+Release:        0.3.0
 Summary:        Implements a Kubernetes API for copying endpoint resources
 License:        Apache-2.0
 URL:            https://github.com/suse-edge/endpoint-copier-operator
 Source:         endpoint-copier-operator-%{version}.tar
 Source1:        vendor.tar.gz
-BuildRequires:  golang(API) = 1.20
+BuildRequires:  golang(API) = 1.24
 ExcludeArch:    s390
 ExcludeArch:    %{ix86}
 

kiwi-builder-image/Dockerfile

@@ -1,6 +1,7 @@
-#!BuildTag: %%IMG_PREFIX%%kiwi-builder:%%kiwi_version%%.0-%RELEASE%
-#!BuildTag: %%IMG_PREFIX%%kiwi-builder:%%kiwi_version%%.0
+#!BuildTag: %%IMG_PREFIX%%kiwi-builder:10.2.12.0-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%kiwi-builder:10.2.12.0
 
+# Base image version, should match the tag above
 ARG KIWIVERSION="10.2.12"
 FROM registry.suse.com/bci/kiwi:${KIWIVERSION}
 ARG KIWIVERSION
@@ -10,11 +11,11 @@ ARG KIWIVERSION
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE Kiwi Builder Container Image"
 LABEL org.opencontainers.image.description="kiwi-builder based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="%%kiwi_version%%"
+LABEL org.opencontainers.image.version="${KIWIVERSION}"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%kiwi-builder:%%kiwi_version%%.0-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%kiwi-builder:${KIWIVERSION}.0-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"
@@ -23,9 +24,6 @@ LABEL com.suse.image-type="application"
 LABEL com.suse.release-stage="released"
 # endlabelprefix
 
-# help the build service understand the need for python3-kiwi
-RUN zypper -n install -d -D python3-kiwi; [ "%%kiwi_version%%" = "${KIWIVERSION}" ] || { echo "expected kiwi version ${KIWIVERSION}: version mismatch"; exit 1; }
-
 # Copy build script into image and make it executable
 ADD build-image.sh /usr/bin/build-image
 RUN chmod a+x /usr/bin/build-image

kiwi-builder-image/_service

@@ -1,15 +1,9 @@
 <services>
   <service mode="buildtime" name="kiwi_metainfo_helper"/>
   <service name="docker_label_helper" mode="buildtime"/>
-  <service name="replace_using_env" mode="buildtime">
-    <param name="file">README</param>
-    <param name="eval">IMG_REPO=$(rpm --macros=/root/.rpmmacros -E %img_repo)</param>
-    <param name="var">IMG_REPO</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
-  </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Dockerfile</param>
+    <param name="file">README</param>
     <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
     <param name="var">IMG_PREFIX</param>
     <param name="eval">IMG_REPO=$(rpm --macros=/root/.rpmmacros -E %img_repo)</param>
@@ -17,14 +11,4 @@
     <param name="eval">SUPPORT_LEVEL=$(rpm --macros=/root/.rpmmacros -E %support_level)</param>
     <param name="var">SUPPORT_LEVEL</param>
   </service>
-  <service mode="buildtime" name="replace_using_package_version">
-    <param name="file">Dockerfile</param>
-    <param name="regex">%%kiwi_version%%</param>
-    <param name="package">python3-kiwi</param>
-  </service>
-  <service mode="buildtime" name="replace_using_package_version">
-    <param name="file">README</param>
-    <param name="regex">%%kiwi_version%%</param>
-    <param name="package">python3-kiwi</param>
-  </service>
 </services>

kubectl-image/Dockerfile

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%kubectl:1.30.3
-#!BuildTag: %%IMG_PREFIX%%kubectl:1.30.3-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%kubectl:1.32.4
+#!BuildTag: %%IMG_PREFIX%%kubectl:1.32.4-%RELEASE%
 #!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
@@ -16,11 +16,11 @@ FROM micro AS final
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE kubectl image"
 LABEL org.opencontainers.image.description="kubectl on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="1.30.3"
+LABEL org.opencontainers.image.version="1.32.4"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%kubectl:1.30.3-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%kubectl:1.32.4-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"

kubectl/kubectl.spec

@@ -1,7 +1,7 @@
 %global debug_package %{nil}
 
 Name: kubectl
-Version: 1.30.3
+Version: 1.32.4
 Release: 0
 Summary: Command-line utility for interacting with a Kubernetes cluster
 
@@ -12,7 +12,7 @@ Group: admin
 Packager: Kubernetes Authors <dev@kubernetes.io>
 License: Apache-2.0
 URL: https://kubernetes.io
-Source0: kubectl_%{version}.orig.tar.gz
+Source0: %{name}_%{version}.orig.tar.gz
 
 %description
 %{summary}.

kubevirt-dashboard-extension-chart/Chart.yaml

@@ -1,4 +1,3 @@
-#!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2
 #!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.2
 #!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.2-%RELEASE%
 annotations:

rancher-turtles-airgap-resources-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.3_up0.20.0
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.3_up0.20.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.4_up0.20.0
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.4_up0.20.0-%RELEASE%
 apiVersion: v2
 appVersion: 0.20.0
 description: Rancher Turtles utility chart for airgap scenarios
@@ -7,4 +7,4 @@ home: https://github.com/rancher/turtles/
 icon: https://raw.githubusercontent.com/rancher/turtles/main/logos/capi.svg
 name: rancher-turtles-airgap-resources
 type: application
-version: "%%CHART_MAJOR%%.0.3+up0.20.0"
+version: "%%CHART_MAJOR%%.0.4+up0.20.0"

rancher-turtles-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.3_up0.20.0
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.3_up0.20.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.4_up0.20.0
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.4_up0.20.0-%RELEASE%
 annotations:
   catalog.cattle.io/certified: rancher
   catalog.cattle.io/display-name: Rancher Turtles - the Cluster API Extension
@@ -29,4 +29,4 @@ keywords:
 - provisioning
 name: rancher-turtles
 type: application
-version: "%%CHART_MAJOR%%.0.3+up0.20.0"
+version: "%%CHART_MAJOR%%.0.4+up0.20.0"

rancher-turtles-chart/questions.yml

@@ -36,7 +36,7 @@ questions:
         label: Enable Agent TLS Mode
         group: "Rancher Turtles Features Settings"
       - variable: rancherTurtles.kubectlImage
-        default: "registry.suse.com/edge/3.2/kubectl:1.30.3"
+        default: "registry.suse.com/edge/3.2/kubectl:1.32.4"
         description: "Specify the image to use when running kubectl in jobs."
         type: string
         label: Kubectl Image

rancher-turtles-chart/values.yaml

@@ -22,7 +22,7 @@ rancherTurtles:
   # rancherInstalled: True if Rancher already installed is in the cluster, this is the preferred installation way.
   rancherInstalled: false
   # kubectlImage: Image for kubectl tasks.
-  kubectlImage: "%%IMG_REPO%%/%%IMG_PREFIX%%kubectl:1.30.3"
+  kubectlImage: "%%IMG_REPO%%/%%IMG_PREFIX%%kubectl:1.32.4"
   # features: Optional and experimental features.
   features:
     # day2operations: Alpha feature.

release-manifest-image/Dockerfile

@@ -1,4 +1,4 @@
-#!BuildTag: %%IMG_PREFIX%%release-manifest:3.3.0
+#!BuildTag: %%IMG_PREFIX%%release-manifest:3.4.0
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION
 
@@ -7,11 +7,11 @@ FROM registry.suse.com/bci/bci-micro:$SLE_VERSION
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SUSE Edge Release Manifest"
 LABEL org.opencontainers.image.description="Release Manifest containing information about a specific SUSE Edge release"
-LABEL org.opencontainers.image.version="3.3.0"
+LABEL org.opencontainers.image.version="3.4.0"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%release-manifest:3.3.0"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%release-manifest:3.4.0"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"

release-manifest-image/release_manifest.yaml

@@ -1,13 +1,13 @@
 apiVersion: lifecycle.suse.com/v1alpha1
 kind: ReleaseManifest
 metadata:
-  name: release-manifest-3-3-0
+  name: release-manifest-3-4-0
 spec:
-  releaseVersion: 3.3.0
+  releaseVersion: 3.4.0
   components:
     kubernetes:
       k3s:
-        version: v1.32.3+k3s1
+        version: v1.32.4+k3s1
         coreComponents:
         - name: traefik-crd
           version: 34.2.1+up34.2.0
@@ -23,7 +23,7 @@ spec:
         - name: coredns
           containers:
           - name: coredns
-            image: rancher/mirrored-coredns-coredns:1.12.0
+            image: rancher/mirrored-coredns-coredns:1.12.1
           type: Deployment
         - name: metrics-server
           containers:
@@ -31,25 +31,25 @@ spec:
             image: rancher/mirrored-metrics-server:v0.7.2
           type: Deployment
       rke2:
-        version: v1.32.3+rke2r1
+        version: v1.32.4+rke2r1
         coreComponents:
         - name: rke2-cilium
-          version: 1.17.100
+          version: 1.17.300
           type: HelmChart
         - name: rke2-canal
-          version: v3.29.2-build2025030601
+          version: v3.29.3-build2025040801
           type: HelmChart
         - name: rke2-calico-crd
           version: v3.29.101
           type: HelmChart
         - name: rke2-calico
-          version: v3.29.200
+          version: v3.29.300
           type: HelmChart
         - name: rke2-coredns
-          version: 1.39.100
+          version: 1.39.201
           type: HelmChart
         - name: rke2-ingress-nginx
-          version: 4.12.100
+          version: 4.12.101
           type: HelmChart
         - name: rke2-metrics-server
           version: 3.12.200
@@ -89,7 +89,7 @@ spec:
         - prettyName: Rancher
           releaseName: rancher
           chart: rancher
-          version: 2.11.1
+          version: 2.11.2
           repository: https://charts.rancher.com/server-charts/prime
           values:
             postDelete:
@@ -123,12 +123,12 @@ spec:
         - prettyName: NeuVector
           releaseName: neuvector
           chart: neuvector
-          version: 106.0.0+up2.8.5
+          version: 106.0.1+up2.8.6
           repository: https://charts.rancher.io
           dependencyCharts:
             - releaseName: neuvector-crd
               chart: neuvector-crd
-              version: 106.0.0+up2.8.5
+              version: 106.0.1+up2.8.6
               repository: https://charts.rancher.io
           addonCharts:
             - releaseName: neuvector-ui-ext
@@ -138,7 +138,7 @@ spec:
         - prettyName: EndpointCopierOperator
           releaseName: endpoint-copier-operator
           chart: "%%CHART_REPO%%/%%CHART_PREFIX%%endpoint-copier-operator"
-          version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+          version: "%%CHART_MAJOR%%.0.1+up0.3.0"
         - prettyName: Elemental
           releaseName: elemental-operator
           chart: oci://registry.suse.com/rancher/elemental-operator-chart
@@ -175,4 +175,4 @@ spec:
         - prettyName: RancherTurtles
           releaseName: rancher-turtles
           chart: "%%CHART_REPO%%/%%CHART_PREFIX%%rancher-turtles"
-          version: "%%CHART_MAJOR%%.0.3+up0.20.0"
+          version: "%%CHART_MAJOR%%.0.4+up0.20.0"

upgrade-controller-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.0_up0.1.1
-#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.0_up0.1.1-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.1_up0.1.1
+#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.1_up0.1.1-%RELEASE%
 apiVersion: v2
 appVersion: 0.1.1
 dependencies:
@@ -10,4 +10,4 @@ dependencies:
 description: A Helm chart for Upgrade Controller
 name: upgrade-controller
 type: application
-version: "%%CHART_MAJOR%%.0.0+up0.1.1"
+version: "%%CHART_MAJOR%%.0.1+up0.1.1"

upgrade-controller-chart/values.yaml

@@ -15,7 +15,7 @@ env:
     image: %%MANIFEST_REPO%%/%%IMG_PREFIX%%release-manifest
   kubectl:
     image: %%IMG_REPO%%/%%IMG_PREFIX%%kubectl
-    version: 1.30.3
+    version: 1.32.4
 
 imagePullSecrets: []
 nameOverride: ""