_config

@@ -23,6 +23,7 @@ Macros:
 Macros:
 %img_repo registry.suse.com/edge
 %chart_repo oci://registry.suse.com/edge
+%chart_prefix charts/
 %manifest_repo registry.suse.com/edge
 %support_level l3
 :Macros
@@ -40,6 +41,7 @@ Macros:
 %img_repo %(echo %{registry_url}:%{_project}:images | tr ":" "/" | tr '[:upper:]' '[:lower:]')
 %manifest_repo %(echo %{registry_url}:%{_project}:test_manifest_images | tr ":" "/" | tr '[:upper:]' '[:lower:]')
 %chart_repo oci://%(echo %{registry_url}:%{_project}:charts | tr ":" "/" | tr '[:upper:]' '[:lower:]')
+%chart_prefix %(echo "")
 :Macros
 %endif
 
@@ -69,7 +71,9 @@ BuildFlags: onlybuild:release-manifest-image
     BuildFlags: onlybuild:baremetal-operator
     BuildFlags: onlybuild:baremetal-operator-image
     BuildFlags: onlybuild:ca-certificates-suse
+    BuildFlags: onlybuild:container-build-checks
     BuildFlags: onlybuild:crudini
+    BuildFlags: onlybuild:edge-build-checks
     BuildFlags: onlybuild:edge-image-builder
     BuildFlags: onlybuild:edge-image-builder-image
     BuildFlags: onlybuild:endpoint-copier-operator
@@ -101,6 +105,10 @@ BuildFlags: onlybuild:release-manifest-image
 
     # Publish multi-arch container images only once all archs have been built
     PublishFlags: archsync
+
+    # skopeo and umoci are used by build scripts to list packages
+    Substitute: system-packages:podman podman buildah createrepo_c release-compare edge-build-checks skopeo umoci
+
 %endif
 
 %if "%_repository" == "images_16.0"
@@ -138,6 +146,9 @@ BuildFlags: onlybuild:release-manifest-image
     Repotype: helm
     Patterntype: none
     Required: perl-YAML-LibYAML
+
+    # include edge-build-checks here
+    Support: edge-build-checks
 %endif
 
 %if "%_repository" == "standard"

akri-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%akri-chart:%%CHART_MAJOR%%.0.0_up0.12.20
+#!BuildTag: %%CHART_PREFIX%%akri:%%CHART_MAJOR%%.0.0_up0.12.20
-#!BuildTag: %%IMG_PREFIX%%akri-chart:%%CHART_MAJOR%%.0.0_up0.12.20-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%akri:%%CHART_MAJOR%%.0.0_up0.12.20-%RELEASE%
 annotations:
   catalog.cattle.io/display-name: Akri
 apiVersion: v2

akri-chart/_service

@@ -9,8 +9,8 @@
   </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

akri-chart/values.yaml

@@ -853,7 +853,7 @@ webhookConfiguration:
     pullPolicy: Always
   certImage:
     # reference is the webhook-certgen image reference
-    reference: registry.k8s.io/ingress-nginx/kube-webhook-certgen
+    reference: registry.rancher.com/rancher/mirrored-ingress-nginx-kube-webhook-certgen
     # tag is the webhook-certgen image tag
     tag: v1.1.1
     # pullPolicy is the webhook-certgen pull policy

akri-dashboard-extension-chart/Chart.yaml

@@ -1,6 +1,6 @@
-#!BuildTag: %%IMG_PREFIX%%akri-dashboard-extension-chart:%%CHART_MAJOR%%.0.1
+#!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.1
-#!BuildTag: %%IMG_PREFIX%%akri-dashboard-extension-chart:%%CHART_MAJOR%%.0.1_up1.3.0
+#!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.1_up1.3.0
-#!BuildTag: %%IMG_PREFIX%%akri-dashboard-extension-chart:%%CHART_MAJOR%%.0.1_up1.3.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.1_up1.3.0-%RELEASE%
 annotations:
   catalog.cattle.io/certified: rancher
   catalog.cattle.io/namespace: cattle-ui-plugin-system

akri-dashboard-extension-chart/_service

@@ -9,8 +9,8 @@
   </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

cdi-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%cdi-chart:%%CHART_MAJOR%%.0.0_up0.4.0
+#!BuildTag: %%CHART_PREFIX%%cdi:%%CHART_MAJOR%%.0.0_up0.4.0
-#!BuildTag: %%IMG_PREFIX%%cdi-chart:%%CHART_MAJOR%%.0.0_up0.4.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%cdi:%%CHART_MAJOR%%.0.0_up0.4.0-%RELEASE%
 apiVersion: v2
 appVersion: 1.60.1
 description: A Helm chart for Containerized Data Importer (CDI)

cdi-chart/_service

@@ -2,8 +2,8 @@
   <service mode="buildtime" name="kiwi_metainfo_helper"/>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

cdi-chart/values.yaml

@@ -25,7 +25,7 @@ cdi:
     nodeSelector:
       kubernetes.io/os: linux
 
-hookImage: rancher/kubectl:v1.30.2
+hookImage: registry.rancher.com/rancher/kubectl:v1.30.10
 hookRestartPolicy: OnFailure
 hookSecurityContext:
   seccompProfile:

container-build-checks/.gitattributes

@@ -0,0 +1,23 @@
+## Default LFS
+*.7z filter=lfs diff=lfs merge=lfs -text
+*.bsp filter=lfs diff=lfs merge=lfs -text
+*.bz2 filter=lfs diff=lfs merge=lfs -text
+*.gem filter=lfs diff=lfs merge=lfs -text
+*.gz filter=lfs diff=lfs merge=lfs -text
+*.jar filter=lfs diff=lfs merge=lfs -text
+*.lz filter=lfs diff=lfs merge=lfs -text
+*.lzma filter=lfs diff=lfs merge=lfs -text
+*.obscpio filter=lfs diff=lfs merge=lfs -text
+*.oxt filter=lfs diff=lfs merge=lfs -text
+*.pdf filter=lfs diff=lfs merge=lfs -text
+*.png filter=lfs diff=lfs merge=lfs -text
+*.rpm filter=lfs diff=lfs merge=lfs -text
+*.tbz filter=lfs diff=lfs merge=lfs -text
+*.tbz2 filter=lfs diff=lfs merge=lfs -text
+*.tgz filter=lfs diff=lfs merge=lfs -text
+*.ttf filter=lfs diff=lfs merge=lfs -text
+*.txz filter=lfs diff=lfs merge=lfs -text
+*.whl filter=lfs diff=lfs merge=lfs -text
+*.xz filter=lfs diff=lfs merge=lfs -text
+*.zip filter=lfs diff=lfs merge=lfs -text
+*.zst filter=lfs diff=lfs merge=lfs -text

container-build-checks/0001-Allow-slash-prefixes-in-registry.patch

@@ -0,0 +1,39 @@
+From 982cfa8500250c9704448880a779ade06cc8f976 Mon Sep 17 00:00:00 2001
+From: Nicolas Belouin <nicolas.belouin@suse.com>
+Date: Thu, 3 Apr 2025 16:53:49 +0200
+Subject: [PATCH] Allow slash prefixes in registry
+
+Signed-off-by: Nicolas Belouin <nicolas.belouin@suse.com>
+---
+ container-build-checks.py | 12 ++++++++----
+ 1 file changed, 8 insertions(+), 4 deletions(-)
+
+diff --git a/container-build-checks.py b/container-build-checks.py
+index b8c873c..d862f33 100755
+--- a/container-build-checks.py
++++ b/container-build-checks.py
+@@ -82,13 +82,17 @@ def verify_reference(image, result, value):
+         return
+ 
+     (registry, repo, tag) = reference_match.groups()
+-    allowed_registries: list[str] = config["General"].getlist("Registry")
+-    if len(allowed_registries) and registry not in allowed_registries:
++    raw_allowed_registries: list[str] = config["General"].getlist("Registry")
++    allowed_registries: dict[str, str] = {v[0]: v[2] for v in map(lambda a: a.partition("/"), raw_allowed_registries)}
++
++    if len(allowed_registries) and (registry not in allowed_registries.keys() or not repo.startswith(allowed_registries[registry])):
+         result.warn(
+             f"The org.opensuse.reference label ({value}) does not use an "
+-            f"allowed registry: {','.join(allowed_registries)}")
++            f"allowed registry: {','.join(raw_allowed_registries)}")
++
++    prefix = allowed_registries[registry]
+ 
+-    if f"{repo}:{tag}" not in image.containerinfo["tags"]:
++    if f"{repo[len(prefix)+1:]}:{tag}" not in image.containerinfo["tags"]:
+         tags = ", ".join(image.containerinfo["tags"])
+         result.warn(f"The org.opensuse.reference label ({value}) does not refer to an existing tag ({tags})")
+     elif "release" in image.containerinfo and image.containerinfo["release"] not in tag:
+-- 
+2.49.0
+

container-build-checks/SUSE.conf

@@ -0,0 +1,4 @@
+[General]
+Vendor=com.suse
+Registry=registry.suse.com
+Registry+=dp.apps.rancher.io

container-build-checks/_service

@@ -0,0 +1,15 @@
+<services>
+  <service mode="manual" name="obs_scm">
+    <param name="url">https://github.com/openSUSE/container-build-checks.git</param>
+    <param name="scm">git</param>
+    <param name="changesgenerate">enable</param>
+  </service>
+  <service mode="manual" name="set_version" />
+  <service mode="buildtime" name="tar">
+    <param name="obsinfo">container-build-checks.obsinfo</param>
+  </service>
+  <service mode="buildtime" name="recompress">
+    <param name="file">*.tar</param>
+    <param name="compression">xz</param>
+  </service>
+</services>

container-build-checks/_servicedata

@@ -0,0 +1,4 @@
+<servicedata>
+<service name="tar_scm">
+                <param name="url">https://github.com/openSUSE/container-build-checks.git</param>
+              <param name="changesrevision">412e7f60c08221a549b0f00dfcc4bee7694193ab</param></service></servicedata>

container-build-checks/container-build-checks.changes

@@ -0,0 +1,101 @@
+-------------------------------------------------------------------
+Mon Aug 12 11:33:57 UTC 2024 - Fabian Vogt <fvogt@suse.com>
+
+- Update to version 1723452932.412e7f6:
+  * add test for missing substitutions
+  * Reject labels that are missing a substitution
+
+-------------------------------------------------------------------
+Mon Jul 22 13:43:57 UTC 2024 - Dirk Müller <dmueller@suse.com>
+
+- update SUSE.conf: allow dp.rancher.apps.io
+
+-------------------------------------------------------------------
+Mon Jul 22 13:08:23 UTC 2024 - Fabian Vogt <fvogt@suse.com>
+
+- Switch _service to mode="manual"
+- Update to version 1721653643.19092fe:
+  * Use generic name for the python setup step
+  * Allow specifying more than one registry
+  * Use Pathlib for resolving containerinfo
+  * Switch to test Python 3.11
+
+-------------------------------------------------------------------
+Fri Apr 28 09:23:53 UTC 2023 - Fabian Vogt <fvogt@suse.com>
+
+- Update to version 1682595397.5ce6d2f:
+  * Handle OCI style images as well
+  * Makefile: Add missing dependency of broken-derived on proper-base
+  * GitHub workflow: Update action versions
+  * GitHub workflow: Test python 3.6 and 3.10
+
+-------------------------------------------------------------------
+Mon Aug  8 11:37:19 UTC 2022 - Fabian Vogt <fvogt@suse.com>
+
+- Make the URL point to GitHub
+
+-------------------------------------------------------------------
+Thu Jul  7 13:42:05 UTC 2022 - Fabian Vogt <fvogt@suse.com>
+
+- openSUSE.conf: Allow bci/* as prefix
+
+-------------------------------------------------------------------
+Wed Apr 20 14:26:26 UTC 2022 - Fabian Vogt <fvogt@suse.com>
+
+- Update to version 1650464301.a198cf9:
+  * Detect and treat local builds specially
+
+-------------------------------------------------------------------
+Mon Mar  7 09:23:46 UTC 2022 - Silvio Moioli <moio@suse.com>
+
+- Adding Uyuni prefix for https://www.uyuni-project.org/
+
+-------------------------------------------------------------------
+Thu Feb 03 07:44:23 UTC 2022 - fvogt@suse.com
+
+- Update to version 1643874076.3d0e13c:
+  * Avoid crash on local builds
+
+-------------------------------------------------------------------
+Tue Dec 14 13:49:12 UTC 2021 - fvogt@suse.com
+
+- Update to version 1639489705.a4c5a3ab2a75:
+  * Don't error out when the release field is empty
+  * Add simple gitpod configuration
+
+-------------------------------------------------------------------
+Tue Jun  1 09:06:12 UTC 2021 - Fabian Vogt <fvogt@suse.com>
+
+- Drop obsolete Requires: grep jq
+
+-------------------------------------------------------------------
+Fri May 28 13:57:34 UTC 2021 - Fabian Vogt <fvogt@suse.com>
+
+- Update to version 1622209785.4616f4f:
+  * README.md: Point badge to new location
+
+-------------------------------------------------------------------
+Fri May 28 12:47:42 UTC 2021 - Fabian Vogt <fvogt@suse.com>
+
+- Update to version 1622204213.c8ecb9f:
+  * Add options to allow and block specific tags
+
+-------------------------------------------------------------------
+Thu May 27 15:09:59 UTC 2021 - Fabian Vogt <fvogt@suse.com>
+
+- Update to version 1622127842.b548dd8:
+  * Update README.md
+  * Add README.md
+  * Add broken-derived test
+  * Verify prefix of the image specific label prefix
+  * Add some comments in the Makefile
+  * Always check the tag used in org.opensuse.reference
+  * Add github workflow
+  * Use bash explicitly
+  * Make lint
+  * Less noise in Makefile
+
+-------------------------------------------------------------------
+Fri Apr 30 10:04:09 UTC 2021 - Fabian Vogt <fvogt@suse.com>
+
+- Initial commit

container-build-checks/container-build-checks.obsinfo

@@ -0,0 +1,4 @@
+name: container-build-checks
+version: 1723452932.412e7f6
+mtime: 1723452932
+commit: 412e7f60c08221a549b0f00dfcc4bee7694193ab

container-build-checks/container-build-checks.spec

@@ -0,0 +1,95 @@
+#
+# spec file for package container-build-checks
+#
+# Copyright (c) 2024 SUSE LLC
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon. The license for this file, and modifications and additions to the
+# file, is the same license as for the pristine package itself (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+# Please submit bugfixes or comments via https://bugs.opensuse.org/
+#
+
+
+Name:           container-build-checks
+Version:        1723452932.412e7f6
+Release:        0
+Summary:        Scripts to validate built container images
+License:        GPL-2.0-or-later
+Group:          Development/Tools/Building
+URL:            https://github.com/openSUSE/container-build-checks
+Patch0:         0001-Allow-slash-prefixes-in-registry.patch
+Source0:        %{name}-%{version}.tar.xz
+Source1:        openSUSE.conf
+Source2:        SUSE.conf
+Requires:       %{name}-vendor
+BuildArch:      noarch
+
+%package vendor-openSUSE
+Summary:        openSUSE configuration for %{name}
+Group:          Development/Tools/Building
+Requires:       %{name} = %{version}
+Provides:       %{name}-vendor
+Conflicts:      %{name}-vendor
+
+%description vendor-openSUSE
+openSUSE configuration for %{name}
+
+%package vendor-SUSE
+Summary:        SUSE configuration for %{name}
+Group:          Development/Tools/Building
+Requires:       %{name} = %{version}
+Provides:       %{name}-vendor
+Conflicts:      %{name}-vendor
+
+%description vendor-SUSE
+SUSE configuration for %{name}
+
+%package strict
+Summary:        Strict configuration for %{name}
+Group:          Development/Tools/Building
+
+%description strict
+Strict configuration for %{name}
+
+%description
+This tool checks that built container images conform to the openSUSE container
+image policies (https://en.opensuse.org/Building_derived_containers).
+
+%prep
+%autosetup -p1
+
+%build
+%make_build
+
+%install
+%make_install
+
+mkdir -p %{buildroot}%{_datadir}/container-build-checks/
+install -m0644 %{SOURCE1} %{buildroot}%{_datadir}/container-build-checks/openSUSE.conf
+install -m0644 %{SOURCE2} %{buildroot}%{_datadir}/container-build-checks/SUSE.conf
+echo -e "[General]\nFatalWarnings=true" > %{buildroot}%{_datadir}/container-build-checks/strict.conf
+
+%files
+#%doc README
+%license LICENSE
+%dir %{_datadir}/container-build-checks
+%dir %{_prefix}/lib/build/
+%dir %{_prefix}/lib/build/post-build-checks/
+%{_prefix}/lib/build/post-build-checks/container-build-checks
+
+%files vendor-openSUSE
+%{_datadir}/container-build-checks/openSUSE.conf
+
+%files vendor-SUSE
+%{_datadir}/container-build-checks/SUSE.conf
+
+%files strict
+%{_datadir}/container-build-checks/strict.conf
+
+%changelog

container-build-checks/openSUSE.conf

@@ -0,0 +1,10 @@
+[General]
+Vendor=org.opensuse
+Registry=registry.opensuse.org
+
+[Tags]
+# To avoid conflicts with other stuff on the registry and
+# avoid ambiguities with images on other registries.
+Allowed+=opensuse/*,kubic/*,kubevirt/*,uyuni/*,bci/*
+# Those are images, not available as namespaces
+Blocked+=opensuse/tumbleweed/*,opensuse/leap/*

edge-build-checks/10-helm-lint

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+HELM="/usr/bin/helm"
+TOPDIR=/usr/src/packages/HELM
+failed=0
+
+if [ -x $HELM ]; then
+    $HELM lint "$TOPDIR"/*.tgz
+    failed=$?
+fi
+
+exit $failed

edge-build-checks/20-helm-images

@@ -0,0 +1,158 @@
+#!/usr/bin/python3
+import os
+import glob
+import subprocess
+import yaml
+import sys
+import pprint
+
+AUTHORIZED_REPOS = [
+    "registry.suse.com/suse/sles/",
+    "registry.rancher.com",
+]
+
+EXTRA_CONFIG = None
+
+class CheckResult:
+    """Class to track count of issues"""
+
+    def __init__(self):
+        self.hints = 0
+        self.warnings = 0
+        self.errors = 0
+
+    def hint(self, msg):
+        print(f"Hint: {msg}")
+        self.hints += 1
+
+    def warn(self, msg):
+        print(f"Warning: {msg}")
+        self.warnings += 1
+
+    def error(self, msg):
+        print(f"Error: {msg}")
+        self.errors += 1
+
+
+def tarballs():
+    """Return a list of .helminfo files to check."""
+    if "BUILD_ROOT" not in os.environ:
+        # Not running in an OBS build container
+        return glob.glob("*.tgz")
+
+    # Running in an OBS build container
+    buildroot = os.environ["BUILD_ROOT"]
+    topdir = "/usr/src/packages"
+    if os.path.isdir(buildroot + "/.build.packages"):
+        topdir = "/.build.packages"
+    if os.path.islink(buildroot + "/.build.packages"):
+        topdir = "/" + os.readlink(buildroot + "/.build.packages")
+
+    return glob.glob(f"{buildroot}{topdir}/HELM/*.tgz")
+
+def get_extra_config():
+    global EXTRA_CONFIG
+    if EXTRA_CONFIG is not None:
+        return EXTRA_CONFIG
+    
+    if "BUILD_ROOT" not in os.environ:
+        file_path = "./.checks_helm.yaml"
+    else:
+        buildroot = os.environ["BUILD_ROOT"]
+        topdir = "/usr/src/packages"
+        file_path = f"{buildroot}{topdir}/SOURCES/.checks_helm.yaml"
+    try:
+        with open(file_path) as config_file:
+            EXTRA_CONFIG = yaml.safe_load(config_file)
+            if EXTRA_CONFIG is None:  # No document in stream
+                EXTRA_CONFIG = {}
+    except OSError:
+        EXTRA_CONFIG = {}
+    return EXTRA_CONFIG
+
+def get_extra_params():
+    config = get_extra_config()
+    args = []
+    for api in config.get('extra_apis', []):
+        args.extend(['-a', api])
+    return args
+
+def is_exception(image):
+    config = get_extra_config()
+    exceptions = config.get('image_exceptions', [])
+    (namespace, _, _) = image.partition(':')
+    return namespace in exceptions
+
+def get_template(tarball_path):
+    raw_templates = subprocess.check_output(
+        [
+            "helm",
+            "template",
+            tarball_path,
+        ] + get_extra_params()
+    ).decode()
+    return yaml.safe_load_all(raw_templates)
+
+
+def extract_key(key, var):
+    if hasattr(var, "items"):  # hasattr(var,'items') for python 3
+        for k, v in var.items():  # var.items() for python 3
+            if k == key:
+                yield v
+            if isinstance(v, dict):
+                for result in extract_key(key, v):
+                    yield result
+            elif isinstance(v, list):
+                for d in v:
+                    for result in extract_key(key, d):
+                        yield result
+
+
+def check_template(result, template):
+    if template["kind"] not in [
+        "Pod",
+        "Deployment",
+        "StatefulSet",
+        "DaemonSet",
+        "ReplicaSet",
+        "Job",
+        "CronJob",
+    ]:
+        return
+    for image in extract_key("image", template):
+        if not image.startswith(tuple(AUTHORIZED_REPOS)) and not is_exception(image):
+            result.error(f"{image} is not from authorized source")
+    pass
+
+
+def main():
+    result = CheckResult()
+    img_repo = subprocess.check_output(
+        [
+            "rpm",
+            "--macros=/root/.rpmmacros",
+            "-E",
+            "%{?img_repo}",
+        ]
+    ).strip()
+    if img_repo:
+        result.hint(f"Adding '{img_repo.decode()}' to authorized repo")
+        AUTHORIZED_REPOS.append(img_repo.decode())
+    else:
+        result.warn("img_repo macro not defined, will not add extra authorized repo")
+    for tarball in tarballs():
+        print(f"Looking at {tarball}")
+        for template in get_template(tarball):
+            if template:  # Exclude empty templates
+                check_template(result, template)
+
+    ret = 0
+    if result.errors > 0:
+        print("Fatal errors found.")
+        ret = 1
+
+    sys.exit(ret)
+
+
+if __name__ == "__main__":
+    main()

edge-build-checks/20-helm-tags

@@ -0,0 +1,92 @@
+#!/usr/bin/python3
+import json
+import os
+import glob
+import sys
+import re
+
+
+class CheckResult:
+    """Class to track count of issues"""
+
+    def __init__(self):
+        self.hints = 0
+        self.warnings = 0
+        self.errors = 0
+
+    def hint(self, msg):
+        print(f"Hint: {msg}")
+        self.hints += 1
+
+    def warn(self, msg):
+        print(f"Warning: {msg}")
+        self.warnings += 1
+
+    def error(self, msg):
+        print(f"Error: {msg}")
+        self.errors += 1
+
+
+TAG_RE = re.compile(r"(.*\/)?([^:]+):([^:]+)")
+
+
+def check_tags(helminfo, result):
+    release_tag_found = False
+    version_tag_found = False
+    for tag in helminfo["tags"]:
+        (tag_prefix, tag_name, tag_version) = TAG_RE.fullmatch(tag).groups()
+        if tag_name != helminfo.get("name"):
+            result.warn(
+                f"Tag ({tag}) doesn't use the chart name ({helminfo.get('name')})"
+            )
+        if "release" in helminfo and helminfo["release"] in tag_version:
+            release_tag_found = True
+        if tag_version.replace("_", "+") == helminfo["version"]:
+            version_tag_found = True
+    if not release_tag_found:
+        result.error(
+            "None of the tags are unique to a specific build of the image.\n"
+            + "Make sure that at least one tag contains the release."
+        )
+    if not version_tag_found:
+        result.error(
+            "None of the tags is the equivalent of the chart's version.\n"
+            + "Make sure that one of the tag is the chart version."
+        )
+
+
+def helminfos():
+    """Return a list of .helminfo files to check."""
+    if "BUILD_ROOT" not in os.environ:
+        # Not running in an OBS build container
+        return glob.glob("*.helminfo")
+
+    # Running in an OBS build container
+    buildroot = os.environ["BUILD_ROOT"]
+    topdir = "/usr/src/packages"
+    if os.path.isdir(buildroot + "/.build.packages"):
+        topdir = "/.build.packages"
+    if os.path.islink(buildroot + "/.build.packages"):
+        topdir = "/" + os.readlink(buildroot + "/.build.packages")
+
+    return glob.glob(f"{buildroot}{topdir}/HELM/*.helminfo")
+
+
+def main():
+    result = CheckResult()
+    for helminfo in helminfos():
+        print(f"Looking at {helminfo}")
+        with open(helminfo, "rb") as cifile:
+            ci_dict = json.load(cifile)
+            check_tags(ci_dict, result)
+
+    ret = 0
+    if result.errors > 0:
+        print("Fatal errors found.")
+        ret = 1
+
+    sys.exit(ret)
+
+
+if __name__ == "__main__":
+    main()

edge-build-checks/COPYING

@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

edge-build-checks/SUSE-Edge.conf

@@ -0,0 +1,6 @@
+[General]
+Vendor=com.suse
+Registry=%%IMG_REPO%%
+
+[Tags]
+Allowed=%%IMG_PREFIX%%*

edge-build-checks/_service

@@ -0,0 +1,9 @@
+<services>
+  <service name="replace_using_env" mode="buildtime">
+    <param name="file">SUSE-Edge.conf</param>
+    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="var">IMG_PREFIX</param>
+    <param name="eval">IMG_REPO=$(rpm --macros=/root/.rpmmacros -E %img_repo)</param>
+    <param name="var">IMG_REPO</param>
+  </service>
+</services>

edge-build-checks/edge-build-checks.spec

@@ -0,0 +1,59 @@
+#
+# spec file for package edge-build-checks
+#
+# Copyright (c) 2024 SUSE LLC
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon. The license for this file, and modifications and additions to the
+# file, is the same license as for the pristine package itself (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+# Please submit bugfixes or comments via https://bugs.opensuse.org/
+#
+
+
+Name:           edge-build-checks
+Summary:        post checks for build after charts and images are created
+License:        GPL-2.0-or-later
+Group:          Development/Tools/Building
+Version:        0.0.1
+Release:        0
+Source0:        COPYING
+Source1:        20-helm-images
+Source2:        10-helm-lint
+Source3:        SUSE-Edge.conf
+Source4:        20-helm-tags
+BuildArch:      noarch
+Requires:       container-build-checks
+Requires:       python3-PyYAML
+Provides:       container-build-checks-vendor
+
+%description
+some scripts to check for problems in edge related helm charts and images after their creation
+in OBS.
+
+%prep
+cp %{SOURCE0} .
+
+%build
+%define _lto_cflags %{nil}
+# nothing to do
+
+%install
+install -d $RPM_BUILD_ROOT/usr/lib/build/post-build-checks
+install -m 755 %{SOURCE1} $RPM_BUILD_ROOT/usr/lib/build/post-build-checks
+install -m 755 %{SOURCE2} $RPM_BUILD_ROOT/usr/lib/build/post-build-checks
+install -m 755 %{SOURCE4} $RPM_BUILD_ROOT/usr/lib/build/post-build-checks
+install -d %{buildroot}%{_datadir}/container-build-checks
+install -m 644 %{SOURCE3} %{buildroot}%{_datadir}/container-build-checks/SUSE-Edge.conf
+
+%files
+%license COPYING
+%{_datadir}/container-build-checks
+/usr/lib/build
+
+%changelog

edge-image-builder-image/_service

@@ -7,8 +7,8 @@
     <param name="eval">IMG_REPO=$(rpm --macros=/root/.rpmmacros -E %img_repo)</param>
     <param name="var">IMG_REPO</param>
     <param name="file">artifacts.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_REPO=$(rpm --macros=/root/.rpmmacros -E %chart_repo)</param>
     <param name="var">CHART_REPO</param>
     <param name="eval">SUPPORT_LEVEL=$(rpm --macros=/root/.rpmmacros -E %support_level)</param>
@@ -17,4 +17,3 @@
     <param name="var">CHART_MAJOR</param>
   </service>
 </services>
-

edge-image-builder-image/artifacts.yaml

@@ -1,10 +1,10 @@
 metallb:
-  chart: metallb-chart
+  chart: metallb
-  repository: "%%CHART_REPO%%/%%IMG_PREFIX%%"
+  repository: "%%CHART_REPO%%/%%CHART_PREFIX%%"
   version: "%%CHART_MAJOR%%.0.0+up0.14.9"
 endpoint-copier-operator:
-  chart: endpoint-copier-operator-chart
+  chart: endpoint-copier-operator
-  repository: "%%CHART_REPO%%/%%IMG_PREFIX%%"
+  repository: "%%CHART_REPO%%/%%CHART_PREFIX%%"
   version: "%%CHART_MAJOR%%.0.0+up0.2.1"
 kubernetes:
   k3s:

endpoint-copier-operator-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%endpoint-copier-operator-chart:%%CHART_MAJOR%%.0.0_up0.2.1
+#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.0_up0.2.1
-#!BuildTag: %%IMG_PREFIX%%endpoint-copier-operator-chart:%%CHART_MAJOR%%.0.0_up0.2.1-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.0_up0.2.1-%RELEASE%
 apiVersion: v2
 appVersion: v0.2.0
 description: A Helm chart for Kubernetes

endpoint-copier-operator-chart/_service

@@ -9,8 +9,8 @@
   </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

kiwi-builder-image/Dockerfile

@@ -6,7 +6,7 @@ FROM registry.suse.com/bci/kiwi:${KIWIVERSION}
 ARG KIWIVERSION
 
 # Define labels according to https://en.opensuse.org/Building_derived_containers
-# labelprefix=com.suse.application.akri
+# labelprefix=com.suse.application.kiwi
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE Kiwi Builder Container Image"
 LABEL org.opencontainers.image.description="kiwi-builder based on the SLE Base Container Image."

kiwi-builder-image/_service

@@ -1,5 +1,6 @@
 <services>
   <service mode="buildtime" name="kiwi_metainfo_helper"/>
+  <service name="docker_label_helper" mode="buildtime"/>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">README</param>
     <param name="eval">IMG_REPO=$(rpm --macros=/root/.rpmmacros -E %img_repo)</param>

kubevirt-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%kubevirt-chart:%%CHART_MAJOR%%.0.0_up0.5.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%kubevirt:%%CHART_MAJOR%%.0.0_up0.5.0-%RELEASE%
-#!BuildTag: %%IMG_PREFIX%%kubevirt-chart:%%CHART_MAJOR%%.0.0_up0.5.0
+#!BuildTag: %%CHART_PREFIX%%kubevirt:%%CHART_MAJOR%%.0.0_up0.5.0
 apiVersion: v2
 appVersion: 1.4.0
 description: A Helm chart for KubeVirt

kubevirt-chart/_service

@@ -2,8 +2,8 @@
   <service mode="buildtime" name="kiwi_metainfo_helper"/>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

kubevirt-chart/values.yaml

@@ -40,7 +40,7 @@ kubevirt:
   monitorAccount: ""
   monitorNamespace: ""
 
-hookImage: rancher/kubectl:v1.30.2
+hookImage: registry.rancher.com/rancher/kubectl:v1.30.10
 hookRestartPolicy: OnFailure
 hookSecurityContext:
   seccompProfile:

kubevirt-dashboard-extension-chart/Chart.yaml

@@ -1,6 +1,6 @@
-#!BuildTag: %%IMG_PREFIX%%kubevirt-dashboard-extension-chart:%%CHART_MAJOR%%.0.1
+#!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.1
-#!BuildTag: %%IMG_PREFIX%%kubevirt-dashboard-extension-chart:%%CHART_MAJOR%%.0.1_up1.3.1
+#!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.1_up1.3.1
-#!BuildTag: %%IMG_PREFIX%%kubevirt-dashboard-extension-chart:%%CHART_MAJOR%%.0.1_up1.3.1-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.1_up1.3.1-%RELEASE%
 annotations:
   catalog.cattle.io/certified: rancher
   catalog.cattle.io/namespace: cattle-ui-plugin-system

kubevirt-dashboard-extension-chart/_service

@@ -9,8 +9,8 @@
   </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

metal3-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%metal3-chart:%%CHART_MAJOR%%.0.2_up0.11.0
+#!BuildTag: %%CHART_PREFIX%%metal3:%%CHART_MAJOR%%.0.2_up0.11.0
-#!BuildTag: %%IMG_PREFIX%%metal3-chart:%%CHART_MAJOR%%.0.2_up0.11.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%metal3:%%CHART_MAJOR%%.0.2_up0.11.0-%RELEASE%
 apiVersion: v2
 appVersion: 0.11.0
 dependencies:

metal3-chart/_service

@@ -9,8 +9,8 @@
   </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

metal3-chart/charts/baremetal-operator/values.yaml

@@ -22,6 +22,8 @@ global:
   # Comment this out when pinning the baremetal-operator container to a specfic host.
   nodeSelector: {}
 
+  enable_tls: false
+
 replicaCount: 1
 
 images:

metal3-chart/charts/ironic/values.yaml

@@ -50,6 +50,8 @@ global:
   # Comment this out when pinning the pdns containers to a specfic host.
   nodeSelector: {}
 
+  enable_tls: false
+
 replicaCount: 1
 
 images:

metallb-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%metallb-chart:%%CHART_MAJOR%%.0.0_up0.14.9
+#!BuildTag: %%CHART_PREFIX%%metallb:%%CHART_MAJOR%%.0.0_up0.14.9
-#!BuildTag: %%IMG_PREFIX%%metallb-chart:%%CHART_MAJOR%%.0.0_up0.14.9-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%metallb:%%CHART_MAJOR%%.0.0_up0.14.9-%RELEASE%
 apiVersion: v2
 appVersion: v0.14.9
 dependencies:

metallb-chart/_service

@@ -9,8 +9,8 @@
   </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

rancher-turtles-airgap-resources-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%rancher-turtles-airgap-resources-chart:%%CHART_MAJOR%%.0.0_up0.17.0
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.0_up0.17.0
-#!BuildTag: %%IMG_PREFIX%%rancher-turtles-airgap-resources-chart:%%CHART_MAJOR%%.0.0_up0.17.0
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.0_up0.17.0-%RELEASE%
 apiVersion: v2
 appVersion: 0.17.0
 description: Rancher Turtles utility chart for airgap scenarios

rancher-turtles-airgap-resources-chart/_service

@@ -2,8 +2,8 @@
   <service mode="buildtime" name="kiwi_metainfo_helper"/>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

rancher-turtles-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%rancher-turtles-chart:%%CHART_MAJOR%%.0.0_up0.17.0
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.0_up0.17.0
-#!BuildTag: %%IMG_PREFIX%%rancher-turtles-chart:%%CHART_MAJOR%%.0.0_up0.17.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.0_up0.17.0-%RELEASE%
 annotations:
   catalog.cattle.io/certified: rancher
   catalog.cattle.io/display-name: Rancher Turtles - the Cluster API Extension

rancher-turtles-chart/_service

@@ -9,8 +9,8 @@
   </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

rancher-turtles-chart/values.yaml

@@ -9,7 +9,7 @@ rancherTurtles:
   managerArguments: []
   imagePullSecrets: []
   rancherInstalled: false
-  kubectlImage: registry.suse.com/edge/3.2/kubectl:1.30.3
+  kubectlImage: "%%IMG_REPO%%/%%IMG_PREFIX%%/kubectl:1.30.3"
   features:
     day2operations:
       enabled: false

release-manifest-image/_service

@@ -11,8 +11,8 @@
   </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">release_manifest.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_REPO=$(rpm --macros=/root/.rpmmacros -E %chart_repo)</param>
     <param name="var">CHART_REPO</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>

release-manifest-image/release_manifest.yaml

@@ -106,19 +106,19 @@ spec:
               repository: https://charts.rancher.io
         - prettyName: MetalLB
           releaseName: metallb
-          chart: %%CHART_REPO%%/%%IMG_PREFIX%%metallb-chart
+          chart: %%CHART_REPO%%/%%CHART_PREFIX%%metallb
           version: %%CHART_MAJOR%%.0.0+up0.14.9
         - prettyName: CDI
           releaseName: cdi
-          chart: %%CHART_REPO%%/%%IMG_PREFIX%%cdi-chart
+          chart: %%CHART_REPO%%/%%CHART_PREFIX%%cdi
           version: %%CHART_MAJOR%%.0.0+up0.4.0
         - prettyName: KubeVirt
           releaseName: kubevirt
-          chart: %%CHART_REPO%%/%%IMG_PREFIX%%kubevirt-chart
+          chart: %%CHART_REPO%%/%%CHART_PREFIX%%kubevirt
           version: %%CHART_MAJOR%%.0.0+up0.4.0
           addonCharts:
             - releaseName: kubevirt-dashboard-extension
-              chart: %%CHART_REPO%%/%%IMG_PREFIX%%kubevirt-dashboard-extension-chart
+              chart: %%CHART_REPO%%/%%CHART_PREFIX%%kubevirt-dashboard-extension
               version: %%CHART_MAJOR%%.0.1+up1.3.1
         - prettyName: NeuVector
           releaseName: neuvector
@@ -137,7 +137,7 @@ spec:
               version: 2.0.1
         - prettyName: EndpointCopierOperator
           releaseName: endpoint-copier-operator
-          chart: %%CHART_REPO%%/%%IMG_PREFIX%%endpoint-copier-operator-chart
+          chart: %%CHART_REPO%%/%%CHART_PREFIX%%endpoint-copier-operator
           version: %%CHART_MAJOR%%.0.0+up0.2.1
         - prettyName: Elemental
           releaseName: elemental-operator
@@ -154,25 +154,25 @@ spec:
               version: 3.0.0
         - prettyName: SRIOV
           releaseName: sriov-network-operator
-          chart: %%CHART_REPO%%/%%IMG_PREFIX%%sriov-network-operator-chart
+          chart: %%CHART_REPO%%/%%CHART_PREFIX%%sriov-network-operator
           version: %%CHART_MAJOR%%.0.0+up1.4.0
           dependencyCharts:
             - releaseName: sriov-crd
-              chart: %%CHART_REPO%%/%%IMG_PREFIX%%sriov-crd-chart
+              chart: %%CHART_REPO%%/%%CHART_PREFIX%%sriov-crd
               version: %%CHART_MAJOR%%.0.0+up1.4.0
         - prettyName: Akri
           releaseName: akri
-          chart: %%CHART_REPO%%/%%IMG_PREFIX%%akri-chart
+          chart: %%CHART_REPO%%/%%CHART_PREFIX%%akri
           version: %%CHART_MAJOR%%.0.0+up0.12.20
           addonCharts:
             - releaseName: akri-dashboard-extension
-              chart: %%CHART_REPO%%/%%IMG_PREFIX%%akri-dashboard-extension-chart
+              chart: %%CHART_REPO%%/%%CHART_PREFIX%%akri-dashboard-extension
               version: %%CHART_MAJOR%%.0.1+up1.3.0
         - prettyName: Metal3
           releaseName: metal3
-          chart: %%CHART_REPO%%/%%IMG_PREFIX%%metal3-chart
+          chart: %%CHART_REPO%%/%%CHART_PREFIX%%metal3
           version: %%CHART_MAJOR%%.0.0+up0.10.0
         - prettyName: RancherTurtles
           releaseName: rancher-turtles
-          chart: %%CHART_REPO%%/%%IMG_PREFIX%%rancher-turtles-chart
+          chart: %%CHART_REPO%%/%%CHART_PREFIX%%rancher-turtles
           version: %%CHART_MAJOR%%.0.0+up0.17.0

sriov-crd-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%sriov-crd-chart:%%CHART_MAJOR%%.0.0_up1.4.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%sriov-crd:%%CHART_MAJOR%%.0.0_up1.4.0-%RELEASE%
-#!BuildTag: %%IMG_PREFIX%%sriov-crd-chart:%%CHART_MAJOR%%.0.0_up1.4.0
+#!BuildTag: %%CHART_PREFIX%%sriov-crd:%%CHART_MAJOR%%.0.0_up1.4.0
 annotations:
   catalog.cattle.io/experimental: "true"
   catalog.cattle.io/hidden: "true"

sriov-crd-chart/_service

@@ -2,8 +2,8 @@
   <service mode="buildtime" name="kiwi_metainfo_helper"/>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

sriov-network-operator-chart/.checks_helm.yaml

@@ -0,0 +1,10 @@
+extra_apis:
+    - k8s.cni.cncf.io/v1/NetworkAttachmentDefinition
+image_exceptions:
+    - rancher/hardened-sriov-network-operator
+    - rancher/hardened-sriov-network-config-daemon
+    - rancher/hardened-sriov-cni
+    - rancher/hardened-ib-sriov-cni
+    - rancher/hardened-sriov-network-device-plugin
+    - rancher/hardened-sriov-network-resources-injector
+    - rancher/hardened-sriov-network-webhook

sriov-network-operator-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%sriov-network-operator-chart:%%CHART_MAJOR%%.0.0_up1.4.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%sriov-network-operator:%%CHART_MAJOR%%.0.0_up1.4.0-%RELEASE%
-#!BuildTag: %%IMG_PREFIX%%sriov-network-operator-chart:%%CHART_MAJOR%%.0.0_up1.4.0
+#!BuildTag: %%CHART_PREFIX%%sriov-network-operator:%%CHART_MAJOR%%.0.0_up1.4.0
 annotations:
   catalog.cattle.io/auto-install: sriov-crd=match
   catalog.cattle.io/experimental: "true"

sriov-network-operator-chart/README.md

@@ -41,7 +41,7 @@ For additional information and methods for installing Helm, refer to the officia
 #### Deploy from OCI repo
 
 ```
-$ helm install -n sriov-network-operator --create-namespace --version 1.3.0 --set sriovOperatorConfig.deploy=true sriov-network-operator oci://ghcr.io/k8snetworkplumbingwg/sriov-network-operator-chart
+$ helm install -n sriov-network-operator --create-namespace --version 1.3.0 --set sriovOperatorConfig.deploy=true sriov-network-operator oci://ghcr.io/k8snetworkplumbingwg/sriov-network-operator
 ```
 
 #### Deploy from project sources
@@ -51,7 +51,7 @@ $ helm install -n sriov-network-operator --create-namespace --version 1.3.0 --se
 $ git clone https://github.com/k8snetworkplumbingwg/sriov-network-operator.git ; cd sriov-network-operator
 
 # Install Operator
-$ helm install -n sriov-network-operator --create-namespace --wait --set sriovOperatorConfig.deploy=true sriov-network-operator ./deployment/sriov-network-operator-chart
+$ helm install -n sriov-network-operator --create-namespace --wait --set sriovOperatorConfig.deploy=true sriov-network-operator ./deployment/sriov-network-operator
 
 # View deployed resources
 $ kubectl -n sriov-network-operator get pods

sriov-network-operator-chart/_service

@@ -2,8 +2,8 @@
   <service mode="buildtime" name="kiwi_metainfo_helper"/>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHAT_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>

sriov-network-operator-chart/charts/sriov-nfd/values.yaml

@@ -1,5 +1,5 @@
 image:
-  repository: rancher/hardened-node-feature-discovery
+  repository: registry.rancher.com/rancher/hardened-node-feature-discovery
   # This should be set to 'IfNotPresent' for released version
   pullPolicy: IfNotPresent
   # tag, if defined will use the given image tag, else Chart.AppVersion will be used

upgrade-controller-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%upgrade-controller-chart:%%CHART_MAJOR%%.0.0_up0.1.1
+#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.0_up0.1.1
-#!BuildTag: %%IMG_PREFIX%%upgrade-controller-chart:%%CHART_MAJOR%%.0.0_up0.1.1-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.0_up0.1.1-%RELEASE%
 apiVersion: v2
 appVersion: 0.1.1
 dependencies:

upgrade-controller-chart/_service

@@ -11,8 +11,8 @@
   </service>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Chart.yaml</param>
-    <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
+    <param name="eval">CHART_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?chart_prefix})</param>
-    <param name="var">IMG_PREFIX</param>
+    <param name="var">CHART_PREFIX</param>
     <param name="eval">CHART_MAJOR=$(rpm --macros=/root/.rpmmacros -E %{?chart_major})</param>
     <param name="var">CHART_MAJOR</param>
   </service>