2011-08-02 11:49:11 +02:00
|
|
|
commit 95f7c57ff4090a5dee062044d2c7b99879077808
|
|
|
|
|
Author: Kamil Dudka <kdudka@redhat.com>
|
|
|
|
|
Date: Fri Jul 22 14:48:42 2011 +0200
|
|
|
|
|
|
|
|
|
|
file-has-acl: use acl_extended_file_nofollow if available
|
|
|
|
|
|
|
|
|
|
* lib/acl-internal.h (HAVE_ACL_EXTENDED_FILE): New macro.
|
|
|
|
|
(acl_extended_file): New macro.
|
|
|
|
|
* lib/file-has-acl.c (file_has_acl): Use acl_extended_file_nofollow.
|
|
|
|
|
* m4/acl.m4 (gl_FUNC_ACL): Check for acl_extended_file_nofollow.
|
|
|
|
|
This addresses http://bugzilla.redhat.com/692823.
|
|
|
|
|
|
- Update to 8.14. Changes since 8.12:
Bug fixes:
- ls --dereference no longer outputs erroneous "argetm" strings for
dangling symlinks when an 'ln=target' entry is in $LS_COLORS.
[bug introduced in fileutils-4.0]
- ls -lL symlink once again properly prints "+" when the referent has
an ACL. [bug introduced in coreutils-8.13]
- sort -g no longer infloops for certain inputs containing NaNs [bug
introduced in coreutils-8.5]
- chown and chgrp with the -v --from= options, now output the correct
owner. I.E. for skipped files, the original ownership is output,
not the new one. [bug introduced in sh-utils-2.0g]
- cp -r could mistakenly change the permissions of an existing
destination directory. [bug introduced in coreutils-6.8]
- cp -u -p would fail to preserve one hard link for each up-to-date
copy of a src-hard-linked name in the destination tree. I.e., if
s/a and s/b are hard-linked and dst/s/a is up to date, "cp -up s
dst" would copy s/b to dst/s/b rather than simply linking dst/s/b
to dst/s/a. [This bug appears to have been present in "the
beginning".]
- fts-using tools (rm, du, chmod, chgrp, chown, chcon) no longer use
memory proportional to the number of entries in each directory they
process. Before, rm -rf 4-million-entry-directory would consume
about 1GiB of memory. Now, it uses less than 30MB, no matter how
many entries there are. [this bug was inherent in the use of fts:
thus, for rm the bug was introduced in coreutils-8.0. The prior
implementation of rm did not use as much memory. du, chmod, chgrp
and chown started using fts in 6.0. chcon was added in
coreutils-6.9.91 with fts support. ]
- pr -T no longer ignores a specified LAST_PAGE to stop at. [bug
introduced in textutils-1.19q]
- printf '%d' '"' no longer accesses out-of-bounds memory in the
diagnostic. [bug introduced in sh-utils-1.16]
- split --number l/... no longer creates extraneous files in certain
cases. [bug introduced in coreutils-8.8]
- timeout now sends signals to commands that create their own process
group. timeout is no longer confused when starting off with a
child process. [bugs introduced in coreutils-7.0]
- unexpand -a now aligns correctly when there are spaces spanning a
tabstop, followed by a tab. In that case a space was dropped,
causing misalignment. We also now ensure that a space never
precedes a tab. [bug introduced in coreutils-5.3.0]
New features:
- date now accepts ISO 8601 date-time strings with "T" as the
separator. It has long parsed dates like "2004-02-29 16:21:42"
with a space between the date and time strings. Now it also parses
"2004-02-29T16:21:42" and fractional-second and time-zone-annotated
variants like "2004-02-29T16:21:42.333-07:00"
- md5sum accepts the new --strict option. With --check, it makes the
tool exit non-zero for any invalid input line, rather than just warning.
This also affects sha1sum, sha224sum, sha384sum and sha512sum.
- split accepts a new --filter=CMD option. With it, split filters
output through CMD. CMD may use the $FILE environment variable,
which is set to the nominal output file name for each invocation of
CMD. For example, to split a file into 3 approximately equal
parts, which are then compressed:
split -n3 --filter='xz > $FILE.xz' big
Note the use of single quotes, not double quotes. That creates
files named xaa.xz, xab.xz and xac.xz.
- timeout accepts a new --foreground option, to support commands not
started directly from a shell prompt, where the command is
interactive or needs to receive signals initiated from the
terminal.
Improvements:
- md5sum --check now supports the -r format from the corresponding
BSD tool. This also affects sha1sum, sha224sum, sha384sum and
sha512sum.
- pwd now works also on systems without openat. On such systems, pwd
would fail when run from a directory whose absolute name contained
more than PATH_MAX / 3 components. The df, stat and readlink
programs are also affected due to their use of the canonicalize_*
functions.
- join --check-order now prints "join: FILE:LINE_NUMBER: bad_line"
for an unsorted input, rather than e.g., "join: file 1 is not in
sorted order".
- shuf outputs small subsets of large permutations much more
efficiently. For example `shuf -i1-$((2**32-1)) -n2` no longer
exhausts memory.
- stat -f now recognizes the GPFS, MQUEUE and PSTOREFS file system
types.
- timeout now supports sub-second timeouts.
Changes in behavior:
- chmod, chown and chgrp now output the original attributes in
messages, when -v or -c specified.
- cp -au (where --preserve=links is implicit) may now replace newer
files in the destination, to mirror hard links from the source.
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=128
2011-10-14 12:07:06 +02:00
|
|
|
Index: lib/acl-internal.h
|
2011-08-02 11:49:11 +02:00
|
|
|
===================================================================
|
- Update to 8.16:
- Improvements:
* As a GNU extension, 'chmod', 'mkdir', and 'install' now accept
operators '-', '+', '=' followed by octal modes;
* Also, ordinary numeric modes with five or more digits no longer
preserve setuid and setgid bits, so that 'chmod 00755 FOO' now
clears FOO's setuid and setgid bits.
* dd now accepts the count_bytes, skip_bytes iflags and the
seek_bytes oflag, to more easily allow processing portions of a
file.
* dd now accepts the conv=sparse flag to attempt to create sparse
output, by seeking rather than writing to the output file.
* ln now accepts the --relative option, to generate a relative
symbolic link to a target, irrespective of how the target is
specified.
* split now accepts an optional "from" argument to
--numeric-suffixes, which changes the start number from the
default of 0.
* split now accepts the --additional-suffix option, to append an
additional static suffix to output file names.
* basename now supports the -a and -s options, which allow
processing of more than one argument at a time. Also the
complementary -z option was added to delimit output items with
the NUL character.
* dirname now supports more than one argument. Also the complementary
z option was added to delimit output items with the NUL character.
- Bug fixes
* du --one-file-system (-x) would ignore any non-directory
specified on the command line. For example, "touch f; du -x f"
would print nothing. [bug introduced in coreutils-8.15]
* mv now lets you move a symlink onto a same-inode destination
file that has two or more hard links.
* "mv A B" could succeed, yet A would remain.
* realpath no longer mishandles a root directory.
- Improvements
* ls can be much more efficient, especially with large directories
on file systems for which getfilecon-, ACL-check- and XATTR-
check-induced syscalls fail with ENOTSUP or similar.
* 'realpath --relative-base=dir' in isolation now implies
'--relative-to=dir' instead of causing a usage failure.
* split now supports an unlimited number of split files as default
behavior.
For a detaild list se NEWS in the documentation.
- Add up-to-date german translation.
- Add two upstream patches that speed up ls (bnc#752943):
* Cache (l)getfilecon calls to avoid the vast majority of the failing
underlying getxattr syscalls.
* Avoids always-failing queries for whether a file has a nontrivial
ACL and for whether a file has certain "capabilities".
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=147
2012-04-16 17:12:46 +02:00
|
|
|
--- lib/acl-internal.h.orig 2012-03-09 08:31:00.000000000 +0100
|
|
|
|
|
+++ lib/acl-internal.h 2012-04-16 13:17:12.470016537 +0200
|
|
|
|
|
@@ -142,6 +142,12 @@ rpl_acl_set_fd (int fd, acl_t acl)
|
2011-08-02 11:49:11 +02:00
|
|
|
# endif
|
|
|
|
|
|
|
|
|
|
/* Linux-specific */
|
|
|
|
|
+# ifndef HAVE_ACL_EXTENDED_FILE_NOFOLLOW
|
|
|
|
|
+# define HAVE_ACL_EXTENDED_FILE_NOFOLLOW false
|
|
|
|
|
+# define acl_extended_file_nofollow(name) (-1)
|
|
|
|
|
+# endif
|
|
|
|
|
+
|
|
|
|
|
+/* Linux-specific */
|
|
|
|
|
# ifndef HAVE_ACL_FROM_MODE
|
|
|
|
|
# define HAVE_ACL_FROM_MODE false
|
|
|
|
|
# define acl_from_mode(mode) (NULL)
|
- Update to 8.14. Changes since 8.12:
Bug fixes:
- ls --dereference no longer outputs erroneous "argetm" strings for
dangling symlinks when an 'ln=target' entry is in $LS_COLORS.
[bug introduced in fileutils-4.0]
- ls -lL symlink once again properly prints "+" when the referent has
an ACL. [bug introduced in coreutils-8.13]
- sort -g no longer infloops for certain inputs containing NaNs [bug
introduced in coreutils-8.5]
- chown and chgrp with the -v --from= options, now output the correct
owner. I.E. for skipped files, the original ownership is output,
not the new one. [bug introduced in sh-utils-2.0g]
- cp -r could mistakenly change the permissions of an existing
destination directory. [bug introduced in coreutils-6.8]
- cp -u -p would fail to preserve one hard link for each up-to-date
copy of a src-hard-linked name in the destination tree. I.e., if
s/a and s/b are hard-linked and dst/s/a is up to date, "cp -up s
dst" would copy s/b to dst/s/b rather than simply linking dst/s/b
to dst/s/a. [This bug appears to have been present in "the
beginning".]
- fts-using tools (rm, du, chmod, chgrp, chown, chcon) no longer use
memory proportional to the number of entries in each directory they
process. Before, rm -rf 4-million-entry-directory would consume
about 1GiB of memory. Now, it uses less than 30MB, no matter how
many entries there are. [this bug was inherent in the use of fts:
thus, for rm the bug was introduced in coreutils-8.0. The prior
implementation of rm did not use as much memory. du, chmod, chgrp
and chown started using fts in 6.0. chcon was added in
coreutils-6.9.91 with fts support. ]
- pr -T no longer ignores a specified LAST_PAGE to stop at. [bug
introduced in textutils-1.19q]
- printf '%d' '"' no longer accesses out-of-bounds memory in the
diagnostic. [bug introduced in sh-utils-1.16]
- split --number l/... no longer creates extraneous files in certain
cases. [bug introduced in coreutils-8.8]
- timeout now sends signals to commands that create their own process
group. timeout is no longer confused when starting off with a
child process. [bugs introduced in coreutils-7.0]
- unexpand -a now aligns correctly when there are spaces spanning a
tabstop, followed by a tab. In that case a space was dropped,
causing misalignment. We also now ensure that a space never
precedes a tab. [bug introduced in coreutils-5.3.0]
New features:
- date now accepts ISO 8601 date-time strings with "T" as the
separator. It has long parsed dates like "2004-02-29 16:21:42"
with a space between the date and time strings. Now it also parses
"2004-02-29T16:21:42" and fractional-second and time-zone-annotated
variants like "2004-02-29T16:21:42.333-07:00"
- md5sum accepts the new --strict option. With --check, it makes the
tool exit non-zero for any invalid input line, rather than just warning.
This also affects sha1sum, sha224sum, sha384sum and sha512sum.
- split accepts a new --filter=CMD option. With it, split filters
output through CMD. CMD may use the $FILE environment variable,
which is set to the nominal output file name for each invocation of
CMD. For example, to split a file into 3 approximately equal
parts, which are then compressed:
split -n3 --filter='xz > $FILE.xz' big
Note the use of single quotes, not double quotes. That creates
files named xaa.xz, xab.xz and xac.xz.
- timeout accepts a new --foreground option, to support commands not
started directly from a shell prompt, where the command is
interactive or needs to receive signals initiated from the
terminal.
Improvements:
- md5sum --check now supports the -r format from the corresponding
BSD tool. This also affects sha1sum, sha224sum, sha384sum and
sha512sum.
- pwd now works also on systems without openat. On such systems, pwd
would fail when run from a directory whose absolute name contained
more than PATH_MAX / 3 components. The df, stat and readlink
programs are also affected due to their use of the canonicalize_*
functions.
- join --check-order now prints "join: FILE:LINE_NUMBER: bad_line"
for an unsorted input, rather than e.g., "join: file 1 is not in
sorted order".
- shuf outputs small subsets of large permutations much more
efficiently. For example `shuf -i1-$((2**32-1)) -n2` no longer
exhausts memory.
- stat -f now recognizes the GPFS, MQUEUE and PSTOREFS file system
types.
- timeout now supports sub-second timeouts.
Changes in behavior:
- chmod, chown and chgrp now output the original attributes in
messages, when -v or -c specified.
- cp -au (where --preserve=links is implicit) may now replace newer
files in the destination, to mirror hard links from the source.
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=128
2011-10-14 12:07:06 +02:00
|
|
|
Index: lib/file-has-acl.c
|
2011-08-02 11:49:11 +02:00
|
|
|
===================================================================
|
- Update to 8.16:
- Improvements:
* As a GNU extension, 'chmod', 'mkdir', and 'install' now accept
operators '-', '+', '=' followed by octal modes;
* Also, ordinary numeric modes with five or more digits no longer
preserve setuid and setgid bits, so that 'chmod 00755 FOO' now
clears FOO's setuid and setgid bits.
* dd now accepts the count_bytes, skip_bytes iflags and the
seek_bytes oflag, to more easily allow processing portions of a
file.
* dd now accepts the conv=sparse flag to attempt to create sparse
output, by seeking rather than writing to the output file.
* ln now accepts the --relative option, to generate a relative
symbolic link to a target, irrespective of how the target is
specified.
* split now accepts an optional "from" argument to
--numeric-suffixes, which changes the start number from the
default of 0.
* split now accepts the --additional-suffix option, to append an
additional static suffix to output file names.
* basename now supports the -a and -s options, which allow
processing of more than one argument at a time. Also the
complementary -z option was added to delimit output items with
the NUL character.
* dirname now supports more than one argument. Also the complementary
z option was added to delimit output items with the NUL character.
- Bug fixes
* du --one-file-system (-x) would ignore any non-directory
specified on the command line. For example, "touch f; du -x f"
would print nothing. [bug introduced in coreutils-8.15]
* mv now lets you move a symlink onto a same-inode destination
file that has two or more hard links.
* "mv A B" could succeed, yet A would remain.
* realpath no longer mishandles a root directory.
- Improvements
* ls can be much more efficient, especially with large directories
on file systems for which getfilecon-, ACL-check- and XATTR-
check-induced syscalls fail with ENOTSUP or similar.
* 'realpath --relative-base=dir' in isolation now implies
'--relative-to=dir' instead of causing a usage failure.
* split now supports an unlimited number of split files as default
behavior.
For a detaild list se NEWS in the documentation.
- Add up-to-date german translation.
- Add two upstream patches that speed up ls (bnc#752943):
* Cache (l)getfilecon calls to avoid the vast majority of the failing
underlying getxattr syscalls.
* Avoids always-failing queries for whether a file has a nontrivial
ACL and for whether a file has certain "capabilities".
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=147
2012-04-16 17:12:46 +02:00
|
|
|
--- lib/file-has-acl.c.orig 2012-03-09 08:31:00.000000000 +0100
|
|
|
|
|
+++ lib/file-has-acl.c 2012-04-16 13:17:12.471016513 +0200
|
|
|
|
|
@@ -492,12 +492,20 @@ file_has_acl (char const *name, struct s
|
2011-08-02 11:49:11 +02:00
|
|
|
/* Linux, FreeBSD, MacOS X, IRIX, Tru64 */
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
- if (HAVE_ACL_EXTENDED_FILE) /* Linux */
|
|
|
|
|
+ if (HAVE_ACL_EXTENDED_FILE || HAVE_ACL_EXTENDED_FILE_NOFOLLOW) /* Linux */
|
|
|
|
|
{
|
|
|
|
|
+# if HAVE_ACL_EXTENDED_FILE_NOFOLLOW
|
|
|
|
|
+ /* acl_extended_file_nofollow() uses lgetxattr() in order to prevent
|
|
|
|
|
+ unnecessary mounts, but it returns the same result as we already
|
|
|
|
|
+ know that NAME is not a symbolic link at this point (modulo the
|
|
|
|
|
+ TOCTTOU race condition). */
|
|
|
|
|
+ ret = acl_extended_file_nofollow (name);
|
|
|
|
|
+# else
|
|
|
|
|
/* On Linux, acl_extended_file is an optimized function: It only
|
|
|
|
|
makes two calls to getxattr(), one for ACL_TYPE_ACCESS, one for
|
|
|
|
|
ACL_TYPE_DEFAULT. */
|
|
|
|
|
ret = acl_extended_file (name);
|
|
|
|
|
+# endif
|
|
|
|
|
}
|
|
|
|
|
else /* FreeBSD, MacOS X, IRIX, Tru64 */
|
|
|
|
|
{
|
- Update to 8.14. Changes since 8.12:
Bug fixes:
- ls --dereference no longer outputs erroneous "argetm" strings for
dangling symlinks when an 'ln=target' entry is in $LS_COLORS.
[bug introduced in fileutils-4.0]
- ls -lL symlink once again properly prints "+" when the referent has
an ACL. [bug introduced in coreutils-8.13]
- sort -g no longer infloops for certain inputs containing NaNs [bug
introduced in coreutils-8.5]
- chown and chgrp with the -v --from= options, now output the correct
owner. I.E. for skipped files, the original ownership is output,
not the new one. [bug introduced in sh-utils-2.0g]
- cp -r could mistakenly change the permissions of an existing
destination directory. [bug introduced in coreutils-6.8]
- cp -u -p would fail to preserve one hard link for each up-to-date
copy of a src-hard-linked name in the destination tree. I.e., if
s/a and s/b are hard-linked and dst/s/a is up to date, "cp -up s
dst" would copy s/b to dst/s/b rather than simply linking dst/s/b
to dst/s/a. [This bug appears to have been present in "the
beginning".]
- fts-using tools (rm, du, chmod, chgrp, chown, chcon) no longer use
memory proportional to the number of entries in each directory they
process. Before, rm -rf 4-million-entry-directory would consume
about 1GiB of memory. Now, it uses less than 30MB, no matter how
many entries there are. [this bug was inherent in the use of fts:
thus, for rm the bug was introduced in coreutils-8.0. The prior
implementation of rm did not use as much memory. du, chmod, chgrp
and chown started using fts in 6.0. chcon was added in
coreutils-6.9.91 with fts support. ]
- pr -T no longer ignores a specified LAST_PAGE to stop at. [bug
introduced in textutils-1.19q]
- printf '%d' '"' no longer accesses out-of-bounds memory in the
diagnostic. [bug introduced in sh-utils-1.16]
- split --number l/... no longer creates extraneous files in certain
cases. [bug introduced in coreutils-8.8]
- timeout now sends signals to commands that create their own process
group. timeout is no longer confused when starting off with a
child process. [bugs introduced in coreutils-7.0]
- unexpand -a now aligns correctly when there are spaces spanning a
tabstop, followed by a tab. In that case a space was dropped,
causing misalignment. We also now ensure that a space never
precedes a tab. [bug introduced in coreutils-5.3.0]
New features:
- date now accepts ISO 8601 date-time strings with "T" as the
separator. It has long parsed dates like "2004-02-29 16:21:42"
with a space between the date and time strings. Now it also parses
"2004-02-29T16:21:42" and fractional-second and time-zone-annotated
variants like "2004-02-29T16:21:42.333-07:00"
- md5sum accepts the new --strict option. With --check, it makes the
tool exit non-zero for any invalid input line, rather than just warning.
This also affects sha1sum, sha224sum, sha384sum and sha512sum.
- split accepts a new --filter=CMD option. With it, split filters
output through CMD. CMD may use the $FILE environment variable,
which is set to the nominal output file name for each invocation of
CMD. For example, to split a file into 3 approximately equal
parts, which are then compressed:
split -n3 --filter='xz > $FILE.xz' big
Note the use of single quotes, not double quotes. That creates
files named xaa.xz, xab.xz and xac.xz.
- timeout accepts a new --foreground option, to support commands not
started directly from a shell prompt, where the command is
interactive or needs to receive signals initiated from the
terminal.
Improvements:
- md5sum --check now supports the -r format from the corresponding
BSD tool. This also affects sha1sum, sha224sum, sha384sum and
sha512sum.
- pwd now works also on systems without openat. On such systems, pwd
would fail when run from a directory whose absolute name contained
more than PATH_MAX / 3 components. The df, stat and readlink
programs are also affected due to their use of the canonicalize_*
functions.
- join --check-order now prints "join: FILE:LINE_NUMBER: bad_line"
for an unsorted input, rather than e.g., "join: file 1 is not in
sorted order".
- shuf outputs small subsets of large permutations much more
efficiently. For example `shuf -i1-$((2**32-1)) -n2` no longer
exhausts memory.
- stat -f now recognizes the GPFS, MQUEUE and PSTOREFS file system
types.
- timeout now supports sub-second timeouts.
Changes in behavior:
- chmod, chown and chgrp now output the original attributes in
messages, when -v or -c specified.
- cp -au (where --preserve=links is implicit) may now replace newer
files in the destination, to mirror hard links from the source.
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=128
2011-10-14 12:07:06 +02:00
|
|
|
Index: m4/acl.m4
|
2011-08-02 11:49:11 +02:00
|
|
|
===================================================================
|
- Update to 8.16:
- Improvements:
* As a GNU extension, 'chmod', 'mkdir', and 'install' now accept
operators '-', '+', '=' followed by octal modes;
* Also, ordinary numeric modes with five or more digits no longer
preserve setuid and setgid bits, so that 'chmod 00755 FOO' now
clears FOO's setuid and setgid bits.
* dd now accepts the count_bytes, skip_bytes iflags and the
seek_bytes oflag, to more easily allow processing portions of a
file.
* dd now accepts the conv=sparse flag to attempt to create sparse
output, by seeking rather than writing to the output file.
* ln now accepts the --relative option, to generate a relative
symbolic link to a target, irrespective of how the target is
specified.
* split now accepts an optional "from" argument to
--numeric-suffixes, which changes the start number from the
default of 0.
* split now accepts the --additional-suffix option, to append an
additional static suffix to output file names.
* basename now supports the -a and -s options, which allow
processing of more than one argument at a time. Also the
complementary -z option was added to delimit output items with
the NUL character.
* dirname now supports more than one argument. Also the complementary
z option was added to delimit output items with the NUL character.
- Bug fixes
* du --one-file-system (-x) would ignore any non-directory
specified on the command line. For example, "touch f; du -x f"
would print nothing. [bug introduced in coreutils-8.15]
* mv now lets you move a symlink onto a same-inode destination
file that has two or more hard links.
* "mv A B" could succeed, yet A would remain.
* realpath no longer mishandles a root directory.
- Improvements
* ls can be much more efficient, especially with large directories
on file systems for which getfilecon-, ACL-check- and XATTR-
check-induced syscalls fail with ENOTSUP or similar.
* 'realpath --relative-base=dir' in isolation now implies
'--relative-to=dir' instead of causing a usage failure.
* split now supports an unlimited number of split files as default
behavior.
For a detaild list se NEWS in the documentation.
- Add up-to-date german translation.
- Add two upstream patches that speed up ls (bnc#752943):
* Cache (l)getfilecon calls to avoid the vast majority of the failing
underlying getxattr syscalls.
* Avoids always-failing queries for whether a file has a nontrivial
ACL and for whether a file has certain "capabilities".
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=147
2012-04-16 17:12:46 +02:00
|
|
|
--- m4/acl.m4.orig 2012-01-06 10:14:31.000000000 +0100
|
|
|
|
|
+++ m4/acl.m4 2012-04-16 13:17:12.471016513 +0200
|
2011-08-02 11:49:11 +02:00
|
|
|
@@ -33,7 +33,7 @@ AC_DEFUN([gl_FUNC_ACL],
|
|
|
|
|
AC_CHECK_FUNCS(
|
|
|
|
|
[acl_get_file acl_get_fd acl_set_file acl_set_fd \
|
|
|
|
|
acl_free acl_from_mode acl_from_text \
|
|
|
|
|
- acl_delete_def_file acl_extended_file \
|
|
|
|
|
+ acl_delete_def_file acl_extended_file acl_extended_file_nofollow \
|
|
|
|
|
acl_delete_fd_np acl_delete_file_np \
|
|
|
|
|
acl_copy_ext_native acl_create_entry_np \
|
|
|
|
|
acl_to_short_text acl_free_text])
|
- Update to 8.14. Changes since 8.12:
Bug fixes:
- ls --dereference no longer outputs erroneous "argetm" strings for
dangling symlinks when an 'ln=target' entry is in $LS_COLORS.
[bug introduced in fileutils-4.0]
- ls -lL symlink once again properly prints "+" when the referent has
an ACL. [bug introduced in coreutils-8.13]
- sort -g no longer infloops for certain inputs containing NaNs [bug
introduced in coreutils-8.5]
- chown and chgrp with the -v --from= options, now output the correct
owner. I.E. for skipped files, the original ownership is output,
not the new one. [bug introduced in sh-utils-2.0g]
- cp -r could mistakenly change the permissions of an existing
destination directory. [bug introduced in coreutils-6.8]
- cp -u -p would fail to preserve one hard link for each up-to-date
copy of a src-hard-linked name in the destination tree. I.e., if
s/a and s/b are hard-linked and dst/s/a is up to date, "cp -up s
dst" would copy s/b to dst/s/b rather than simply linking dst/s/b
to dst/s/a. [This bug appears to have been present in "the
beginning".]
- fts-using tools (rm, du, chmod, chgrp, chown, chcon) no longer use
memory proportional to the number of entries in each directory they
process. Before, rm -rf 4-million-entry-directory would consume
about 1GiB of memory. Now, it uses less than 30MB, no matter how
many entries there are. [this bug was inherent in the use of fts:
thus, for rm the bug was introduced in coreutils-8.0. The prior
implementation of rm did not use as much memory. du, chmod, chgrp
and chown started using fts in 6.0. chcon was added in
coreutils-6.9.91 with fts support. ]
- pr -T no longer ignores a specified LAST_PAGE to stop at. [bug
introduced in textutils-1.19q]
- printf '%d' '"' no longer accesses out-of-bounds memory in the
diagnostic. [bug introduced in sh-utils-1.16]
- split --number l/... no longer creates extraneous files in certain
cases. [bug introduced in coreutils-8.8]
- timeout now sends signals to commands that create their own process
group. timeout is no longer confused when starting off with a
child process. [bugs introduced in coreutils-7.0]
- unexpand -a now aligns correctly when there are spaces spanning a
tabstop, followed by a tab. In that case a space was dropped,
causing misalignment. We also now ensure that a space never
precedes a tab. [bug introduced in coreutils-5.3.0]
New features:
- date now accepts ISO 8601 date-time strings with "T" as the
separator. It has long parsed dates like "2004-02-29 16:21:42"
with a space between the date and time strings. Now it also parses
"2004-02-29T16:21:42" and fractional-second and time-zone-annotated
variants like "2004-02-29T16:21:42.333-07:00"
- md5sum accepts the new --strict option. With --check, it makes the
tool exit non-zero for any invalid input line, rather than just warning.
This also affects sha1sum, sha224sum, sha384sum and sha512sum.
- split accepts a new --filter=CMD option. With it, split filters
output through CMD. CMD may use the $FILE environment variable,
which is set to the nominal output file name for each invocation of
CMD. For example, to split a file into 3 approximately equal
parts, which are then compressed:
split -n3 --filter='xz > $FILE.xz' big
Note the use of single quotes, not double quotes. That creates
files named xaa.xz, xab.xz and xac.xz.
- timeout accepts a new --foreground option, to support commands not
started directly from a shell prompt, where the command is
interactive or needs to receive signals initiated from the
terminal.
Improvements:
- md5sum --check now supports the -r format from the corresponding
BSD tool. This also affects sha1sum, sha224sum, sha384sum and
sha512sum.
- pwd now works also on systems without openat. On such systems, pwd
would fail when run from a directory whose absolute name contained
more than PATH_MAX / 3 components. The df, stat and readlink
programs are also affected due to their use of the canonicalize_*
functions.
- join --check-order now prints "join: FILE:LINE_NUMBER: bad_line"
for an unsorted input, rather than e.g., "join: file 1 is not in
sorted order".
- shuf outputs small subsets of large permutations much more
efficiently. For example `shuf -i1-$((2**32-1)) -n2` no longer
exhausts memory.
- stat -f now recognizes the GPFS, MQUEUE and PSTOREFS file system
types.
- timeout now supports sub-second timeouts.
Changes in behavior:
- chmod, chown and chgrp now output the original attributes in
messages, when -v or -c specified.
- cp -au (where --preserve=links is implicit) may now replace newer
files in the destination, to mirror hard links from the source.
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=128
2011-10-14 12:07:06 +02:00
|
|
|
Index: ChangeLog
|
2011-08-02 11:49:11 +02:00
|
|
|
===================================================================
|
- Update to 8.16:
- Improvements:
* As a GNU extension, 'chmod', 'mkdir', and 'install' now accept
operators '-', '+', '=' followed by octal modes;
* Also, ordinary numeric modes with five or more digits no longer
preserve setuid and setgid bits, so that 'chmod 00755 FOO' now
clears FOO's setuid and setgid bits.
* dd now accepts the count_bytes, skip_bytes iflags and the
seek_bytes oflag, to more easily allow processing portions of a
file.
* dd now accepts the conv=sparse flag to attempt to create sparse
output, by seeking rather than writing to the output file.
* ln now accepts the --relative option, to generate a relative
symbolic link to a target, irrespective of how the target is
specified.
* split now accepts an optional "from" argument to
--numeric-suffixes, which changes the start number from the
default of 0.
* split now accepts the --additional-suffix option, to append an
additional static suffix to output file names.
* basename now supports the -a and -s options, which allow
processing of more than one argument at a time. Also the
complementary -z option was added to delimit output items with
the NUL character.
* dirname now supports more than one argument. Also the complementary
z option was added to delimit output items with the NUL character.
- Bug fixes
* du --one-file-system (-x) would ignore any non-directory
specified on the command line. For example, "touch f; du -x f"
would print nothing. [bug introduced in coreutils-8.15]
* mv now lets you move a symlink onto a same-inode destination
file that has two or more hard links.
* "mv A B" could succeed, yet A would remain.
* realpath no longer mishandles a root directory.
- Improvements
* ls can be much more efficient, especially with large directories
on file systems for which getfilecon-, ACL-check- and XATTR-
check-induced syscalls fail with ENOTSUP or similar.
* 'realpath --relative-base=dir' in isolation now implies
'--relative-to=dir' instead of causing a usage failure.
* split now supports an unlimited number of split files as default
behavior.
For a detaild list se NEWS in the documentation.
- Add up-to-date german translation.
- Add two upstream patches that speed up ls (bnc#752943):
* Cache (l)getfilecon calls to avoid the vast majority of the failing
underlying getxattr syscalls.
* Avoids always-failing queries for whether a file has a nontrivial
ACL and for whether a file has certain "capabilities".
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=147
2012-04-16 17:12:46 +02:00
|
|
|
--- ChangeLog.orig 2012-03-26 14:15:03.000000000 +0200
|
|
|
|
|
+++ ChangeLog 2012-04-16 13:17:12.474016441 +0200
|
|
|
|
|
@@ -2815,6 +2815,14 @@
|
- Update to 8.14. Changes since 8.12:
Bug fixes:
- ls --dereference no longer outputs erroneous "argetm" strings for
dangling symlinks when an 'ln=target' entry is in $LS_COLORS.
[bug introduced in fileutils-4.0]
- ls -lL symlink once again properly prints "+" when the referent has
an ACL. [bug introduced in coreutils-8.13]
- sort -g no longer infloops for certain inputs containing NaNs [bug
introduced in coreutils-8.5]
- chown and chgrp with the -v --from= options, now output the correct
owner. I.E. for skipped files, the original ownership is output,
not the new one. [bug introduced in sh-utils-2.0g]
- cp -r could mistakenly change the permissions of an existing
destination directory. [bug introduced in coreutils-6.8]
- cp -u -p would fail to preserve one hard link for each up-to-date
copy of a src-hard-linked name in the destination tree. I.e., if
s/a and s/b are hard-linked and dst/s/a is up to date, "cp -up s
dst" would copy s/b to dst/s/b rather than simply linking dst/s/b
to dst/s/a. [This bug appears to have been present in "the
beginning".]
- fts-using tools (rm, du, chmod, chgrp, chown, chcon) no longer use
memory proportional to the number of entries in each directory they
process. Before, rm -rf 4-million-entry-directory would consume
about 1GiB of memory. Now, it uses less than 30MB, no matter how
many entries there are. [this bug was inherent in the use of fts:
thus, for rm the bug was introduced in coreutils-8.0. The prior
implementation of rm did not use as much memory. du, chmod, chgrp
and chown started using fts in 6.0. chcon was added in
coreutils-6.9.91 with fts support. ]
- pr -T no longer ignores a specified LAST_PAGE to stop at. [bug
introduced in textutils-1.19q]
- printf '%d' '"' no longer accesses out-of-bounds memory in the
diagnostic. [bug introduced in sh-utils-1.16]
- split --number l/... no longer creates extraneous files in certain
cases. [bug introduced in coreutils-8.8]
- timeout now sends signals to commands that create their own process
group. timeout is no longer confused when starting off with a
child process. [bugs introduced in coreutils-7.0]
- unexpand -a now aligns correctly when there are spaces spanning a
tabstop, followed by a tab. In that case a space was dropped,
causing misalignment. We also now ensure that a space never
precedes a tab. [bug introduced in coreutils-5.3.0]
New features:
- date now accepts ISO 8601 date-time strings with "T" as the
separator. It has long parsed dates like "2004-02-29 16:21:42"
with a space between the date and time strings. Now it also parses
"2004-02-29T16:21:42" and fractional-second and time-zone-annotated
variants like "2004-02-29T16:21:42.333-07:00"
- md5sum accepts the new --strict option. With --check, it makes the
tool exit non-zero for any invalid input line, rather than just warning.
This also affects sha1sum, sha224sum, sha384sum and sha512sum.
- split accepts a new --filter=CMD option. With it, split filters
output through CMD. CMD may use the $FILE environment variable,
which is set to the nominal output file name for each invocation of
CMD. For example, to split a file into 3 approximately equal
parts, which are then compressed:
split -n3 --filter='xz > $FILE.xz' big
Note the use of single quotes, not double quotes. That creates
files named xaa.xz, xab.xz and xac.xz.
- timeout accepts a new --foreground option, to support commands not
started directly from a shell prompt, where the command is
interactive or needs to receive signals initiated from the
terminal.
Improvements:
- md5sum --check now supports the -r format from the corresponding
BSD tool. This also affects sha1sum, sha224sum, sha384sum and
sha512sum.
- pwd now works also on systems without openat. On such systems, pwd
would fail when run from a directory whose absolute name contained
more than PATH_MAX / 3 components. The df, stat and readlink
programs are also affected due to their use of the canonicalize_*
functions.
- join --check-order now prints "join: FILE:LINE_NUMBER: bad_line"
for an unsorted input, rather than e.g., "join: file 1 is not in
sorted order".
- shuf outputs small subsets of large permutations much more
efficiently. For example `shuf -i1-$((2**32-1)) -n2` no longer
exhausts memory.
- stat -f now recognizes the GPFS, MQUEUE and PSTOREFS file system
types.
- timeout now supports sub-second timeouts.
Changes in behavior:
- chmod, chown and chgrp now output the original attributes in
messages, when -v or -c specified.
- cp -au (where --preserve=links is implicit) may now replace newer
files in the destination, to mirror hard links from the source.
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=128
2011-10-14 12:07:06 +02:00
|
|
|
MacOS X 10.7 has an fdatasync that is not declared, and is rumored to
|
|
|
|
|
be ineffective. (Bug#9141)
|
|
|
|
|
|
2011-08-02 11:49:11 +02:00
|
|
|
+2011-07-22 Kamil Dudka <kdudka@redhat.com>
|
|
|
|
|
+
|
|
|
|
|
+ file-has-acl: use acl_extended_file_nofollow if available
|
|
|
|
|
+ * lib/acl-internal.h (HAVE_ACL_EXTENDED_FILE): New macro.
|
|
|
|
|
+ (acl_extended_file): New macro.
|
|
|
|
|
+ * lib/file-has-acl.c (file_has_acl): Use acl_extended_file_nofollow.
|
|
|
|
|
+ * m4/acl.m4 (gl_FUNC_ACL): Check for acl_extended_file_nofollow.
|
|
|
|
|
+
|
- Update to 8.14. Changes since 8.12:
Bug fixes:
- ls --dereference no longer outputs erroneous "argetm" strings for
dangling symlinks when an 'ln=target' entry is in $LS_COLORS.
[bug introduced in fileutils-4.0]
- ls -lL symlink once again properly prints "+" when the referent has
an ACL. [bug introduced in coreutils-8.13]
- sort -g no longer infloops for certain inputs containing NaNs [bug
introduced in coreutils-8.5]
- chown and chgrp with the -v --from= options, now output the correct
owner. I.E. for skipped files, the original ownership is output,
not the new one. [bug introduced in sh-utils-2.0g]
- cp -r could mistakenly change the permissions of an existing
destination directory. [bug introduced in coreutils-6.8]
- cp -u -p would fail to preserve one hard link for each up-to-date
copy of a src-hard-linked name in the destination tree. I.e., if
s/a and s/b are hard-linked and dst/s/a is up to date, "cp -up s
dst" would copy s/b to dst/s/b rather than simply linking dst/s/b
to dst/s/a. [This bug appears to have been present in "the
beginning".]
- fts-using tools (rm, du, chmod, chgrp, chown, chcon) no longer use
memory proportional to the number of entries in each directory they
process. Before, rm -rf 4-million-entry-directory would consume
about 1GiB of memory. Now, it uses less than 30MB, no matter how
many entries there are. [this bug was inherent in the use of fts:
thus, for rm the bug was introduced in coreutils-8.0. The prior
implementation of rm did not use as much memory. du, chmod, chgrp
and chown started using fts in 6.0. chcon was added in
coreutils-6.9.91 with fts support. ]
- pr -T no longer ignores a specified LAST_PAGE to stop at. [bug
introduced in textutils-1.19q]
- printf '%d' '"' no longer accesses out-of-bounds memory in the
diagnostic. [bug introduced in sh-utils-1.16]
- split --number l/... no longer creates extraneous files in certain
cases. [bug introduced in coreutils-8.8]
- timeout now sends signals to commands that create their own process
group. timeout is no longer confused when starting off with a
child process. [bugs introduced in coreutils-7.0]
- unexpand -a now aligns correctly when there are spaces spanning a
tabstop, followed by a tab. In that case a space was dropped,
causing misalignment. We also now ensure that a space never
precedes a tab. [bug introduced in coreutils-5.3.0]
New features:
- date now accepts ISO 8601 date-time strings with "T" as the
separator. It has long parsed dates like "2004-02-29 16:21:42"
with a space between the date and time strings. Now it also parses
"2004-02-29T16:21:42" and fractional-second and time-zone-annotated
variants like "2004-02-29T16:21:42.333-07:00"
- md5sum accepts the new --strict option. With --check, it makes the
tool exit non-zero for any invalid input line, rather than just warning.
This also affects sha1sum, sha224sum, sha384sum and sha512sum.
- split accepts a new --filter=CMD option. With it, split filters
output through CMD. CMD may use the $FILE environment variable,
which is set to the nominal output file name for each invocation of
CMD. For example, to split a file into 3 approximately equal
parts, which are then compressed:
split -n3 --filter='xz > $FILE.xz' big
Note the use of single quotes, not double quotes. That creates
files named xaa.xz, xab.xz and xac.xz.
- timeout accepts a new --foreground option, to support commands not
started directly from a shell prompt, where the command is
interactive or needs to receive signals initiated from the
terminal.
Improvements:
- md5sum --check now supports the -r format from the corresponding
BSD tool. This also affects sha1sum, sha224sum, sha384sum and
sha512sum.
- pwd now works also on systems without openat. On such systems, pwd
would fail when run from a directory whose absolute name contained
more than PATH_MAX / 3 components. The df, stat and readlink
programs are also affected due to their use of the canonicalize_*
functions.
- join --check-order now prints "join: FILE:LINE_NUMBER: bad_line"
for an unsorted input, rather than e.g., "join: file 1 is not in
sorted order".
- shuf outputs small subsets of large permutations much more
efficiently. For example `shuf -i1-$((2**32-1)) -n2` no longer
exhausts memory.
- stat -f now recognizes the GPFS, MQUEUE and PSTOREFS file system
types.
- timeout now supports sub-second timeouts.
Changes in behavior:
- chmod, chown and chgrp now output the original attributes in
messages, when -v or -c specified.
- cp -au (where --preserve=links is implicit) may now replace newer
files in the destination, to mirror hard links from the source.
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=128
2011-10-14 12:07:06 +02:00
|
|
|
2011-07-20 Mike Frysinger <vapier@gentoo.org>
|
2011-08-02 11:49:11 +02:00
|
|
|
|
- Update to 8.14. Changes since 8.12:
Bug fixes:
- ls --dereference no longer outputs erroneous "argetm" strings for
dangling symlinks when an 'ln=target' entry is in $LS_COLORS.
[bug introduced in fileutils-4.0]
- ls -lL symlink once again properly prints "+" when the referent has
an ACL. [bug introduced in coreutils-8.13]
- sort -g no longer infloops for certain inputs containing NaNs [bug
introduced in coreutils-8.5]
- chown and chgrp with the -v --from= options, now output the correct
owner. I.E. for skipped files, the original ownership is output,
not the new one. [bug introduced in sh-utils-2.0g]
- cp -r could mistakenly change the permissions of an existing
destination directory. [bug introduced in coreutils-6.8]
- cp -u -p would fail to preserve one hard link for each up-to-date
copy of a src-hard-linked name in the destination tree. I.e., if
s/a and s/b are hard-linked and dst/s/a is up to date, "cp -up s
dst" would copy s/b to dst/s/b rather than simply linking dst/s/b
to dst/s/a. [This bug appears to have been present in "the
beginning".]
- fts-using tools (rm, du, chmod, chgrp, chown, chcon) no longer use
memory proportional to the number of entries in each directory they
process. Before, rm -rf 4-million-entry-directory would consume
about 1GiB of memory. Now, it uses less than 30MB, no matter how
many entries there are. [this bug was inherent in the use of fts:
thus, for rm the bug was introduced in coreutils-8.0. The prior
implementation of rm did not use as much memory. du, chmod, chgrp
and chown started using fts in 6.0. chcon was added in
coreutils-6.9.91 with fts support. ]
- pr -T no longer ignores a specified LAST_PAGE to stop at. [bug
introduced in textutils-1.19q]
- printf '%d' '"' no longer accesses out-of-bounds memory in the
diagnostic. [bug introduced in sh-utils-1.16]
- split --number l/... no longer creates extraneous files in certain
cases. [bug introduced in coreutils-8.8]
- timeout now sends signals to commands that create their own process
group. timeout is no longer confused when starting off with a
child process. [bugs introduced in coreutils-7.0]
- unexpand -a now aligns correctly when there are spaces spanning a
tabstop, followed by a tab. In that case a space was dropped,
causing misalignment. We also now ensure that a space never
precedes a tab. [bug introduced in coreutils-5.3.0]
New features:
- date now accepts ISO 8601 date-time strings with "T" as the
separator. It has long parsed dates like "2004-02-29 16:21:42"
with a space between the date and time strings. Now it also parses
"2004-02-29T16:21:42" and fractional-second and time-zone-annotated
variants like "2004-02-29T16:21:42.333-07:00"
- md5sum accepts the new --strict option. With --check, it makes the
tool exit non-zero for any invalid input line, rather than just warning.
This also affects sha1sum, sha224sum, sha384sum and sha512sum.
- split accepts a new --filter=CMD option. With it, split filters
output through CMD. CMD may use the $FILE environment variable,
which is set to the nominal output file name for each invocation of
CMD. For example, to split a file into 3 approximately equal
parts, which are then compressed:
split -n3 --filter='xz > $FILE.xz' big
Note the use of single quotes, not double quotes. That creates
files named xaa.xz, xab.xz and xac.xz.
- timeout accepts a new --foreground option, to support commands not
started directly from a shell prompt, where the command is
interactive or needs to receive signals initiated from the
terminal.
Improvements:
- md5sum --check now supports the -r format from the corresponding
BSD tool. This also affects sha1sum, sha224sum, sha384sum and
sha512sum.
- pwd now works also on systems without openat. On such systems, pwd
would fail when run from a directory whose absolute name contained
more than PATH_MAX / 3 components. The df, stat and readlink
programs are also affected due to their use of the canonicalize_*
functions.
- join --check-order now prints "join: FILE:LINE_NUMBER: bad_line"
for an unsorted input, rather than e.g., "join: file 1 is not in
sorted order".
- shuf outputs small subsets of large permutations much more
efficiently. For example `shuf -i1-$((2**32-1)) -n2` no longer
exhausts memory.
- stat -f now recognizes the GPFS, MQUEUE and PSTOREFS file system
types.
- timeout now supports sub-second timeouts.
Changes in behavior:
- chmod, chown and chgrp now output the original attributes in
messages, when -v or -c specified.
- cp -au (where --preserve=links is implicit) may now replace newer
files in the destination, to mirror hard links from the source.
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=128
2011-10-14 12:07:06 +02:00
|
|
|
dircolors: add screen.Eterm terminal type
|
