---
aclocal.m4 | 40 +++++++-----
configure | 41 +++++++------
include/curses.h.in | 3
include/termcap.h.in | 2
include/tic.h | 4 -
man/man_db.renames | 2
man/ncurses.3x | 4 +
misc/gen-pkgconfig.in | 7 +-
misc/ncurses-config.in | 2
misc/terminfo.src | 133 +++++++++++++++++++++++++++++++++----------
ncurses/Makefile.in | 2
ncurses/curses.priv.h | 2
ncurses/run_cmd.sh | 11 +++
ncurses/tinfo/MKfallback.sh | 10 ++-
ncurses/tinfo/access.c | 27 ++++++++
ncurses/tinfo/lib_setup.c | 3
ncurses/tinfo/read_entry.c | 2
ncurses/tinfo/read_termcap.c | 21 ++++--
test/test.priv.h | 4 -
19 files changed, 240 insertions(+), 80 deletions(-)
--- aclocal.m4
+++ aclocal.m4 2017-04-03 08:35:03.190142388 +0000
@@ -580,7 +580,7 @@ AC_MSG_CHECKING([for size of bool])
AC_CACHE_VAL(cf_cv_type_of_bool,[
rm -f cf_test.out
AC_TRY_RUN([
-#include <stdlib.h>
+//#include <stdlib.h> // conflict with exit declaration
#include <stdio.h>
#if defined(__cplusplus)
@@ -4754,12 +4754,15 @@ cat >>$cf_edit_man <<CF_EOF
echo '? missing rename for '\$cf_source
cf_target="\$cf_source"
fi
- cf_target="\$cf_subdir\${section}/\${cf_target}"
-
CF_EOF
fi
cat >>$cf_edit_man <<CF_EOF
+for t in \$cf_target; do
+ t="\$cf_subdir\${section}/\${t}"
+CF_EOF
+
+cat >>$cf_edit_man <<CF_EOF
sed -f $cf_man_alias \\
CF_EOF
@@ -4769,7 +4772,7 @@ cat >>$cf_edit_man <<CF_EOF
CF_EOF
else
cat >>$cf_edit_man <<CF_EOF
- < \$i >\$TMP
+ < \$i | sed -f $srcdir/edit_man.sed >\$TMP
CF_EOF
fi
@@ -4809,7 +4812,7 @@ cat >>$cf_edit_man <<CF_EOF
mv \$TMP.$cf_so_strip \$TMP
fi
fi
- cf_target="\$cf_target.$cf_so_strip"
+ t="\$t.$cf_so_strip"
CF_EOF
fi
@@ -4818,23 +4821,23 @@ case "$MANPAGE_FORMAT" in
cat >>$cf_edit_man <<CF_EOF
if test \$form = format ; then
# BSDI installs only .0 suffixes in the cat directories
- cf_target="\`echo \$cf_target|sed -e 's/\.[[1-9]]\+[[a-z]]*/.0/'\`"
+ t="\`echo \$t|sed -e 's/\.[[1-9]]\+[[a-z]]*/.0/'\`"
fi
CF_EOF
;;
esac
cat >>$cf_edit_man <<CF_EOF
- suffix=\`basename \$cf_target | sed -e 's%^[[^.]]*%%'\`
+ suffix=\`basename \$t | sed -e 's%^[[^.]]*%%'\`
if test \$verb = installing ; then
- echo \$verb \$cf_target
- \$INSTALL_DATA \$TMP \$cf_target
+ echo \$verb \$t
+ \$INSTALL_DATA \$TMP \$t
test -d \$cf_subdir\${section} &&
test -n "\$aliases" && (
cd \$cf_subdir\${section} && (
- cf_source=\`echo \$cf_target |sed -e 's%^.*/\([[^/]][[^/]]*/[[^/]][[^/]]*$\)%\1%'\`
+ cf_source=\`echo \$t |sed -e 's%^.*/\([[^/]][[^/]]*/[[^/]][[^/]]*$\)%\1%'\`
test -n "$cf_so_strip" && cf_source=\`echo \$cf_source |sed -e 's%\.$cf_so_strip\$%%'\`
- cf_target=\`basename \$cf_target\`
+ t=\`basename \$t\`
for cf_alias in \$aliases
do
if test \$section = 1 ; then
@@ -4843,7 +4846,7 @@ cat >>$cf_edit_man <<CF_EOF
if test "$MANPAGE_SYMLINKS" = yes ; then
if test -f \$cf_alias\${suffix} ; then
- if ( cmp -s \$cf_target \$cf_alias\${suffix} )
+ if ( cmp -s \$t \$cf_alias\${suffix} )
then
continue
fi
@@ -4853,18 +4856,18 @@ CF_EOF
case "x$LN_S" in
(*-f)
cat >>$cf_edit_man <<CF_EOF
- $LN_S \$cf_target \$cf_alias\${suffix}
+ $LN_S \$t \$cf_alias\${suffix}
CF_EOF
;;
(*)
cat >>$cf_edit_man <<CF_EOF
rm -f \$cf_alias\${suffix}
- $LN_S \$cf_target \$cf_alias\${suffix}
+ $LN_S \$t \$cf_alias\${suffix}
CF_EOF
;;
esac
cat >>$cf_edit_man <<CF_EOF
- elif test "\$cf_target" != "\$cf_alias\${suffix}" ; then
+ elif test "\$t" != "\$cf_alias\${suffix}" ; then
echo ".so \$cf_source" >\$TMP
CF_EOF
if test -n "$cf_compress" ; then
@@ -4884,9 +4887,9 @@ cat >>$cf_edit_man <<CF_EOF
)
)
elif test \$verb = removing ; then
- test -f \$cf_target && (
- echo \$verb \$cf_target
- rm -f \$cf_target
+ test -f \$t && (
+ echo \$verb \$t
+ rm -f \$t
)
test -d \$cf_subdir\${section} &&
test -n "\$aliases" && (
@@ -4906,6 +4909,7 @@ cat >>$cf_edit_man <<CF_EOF
# echo ".hy 0"
cat \$TMP
fi
+done
;;
esac
done
--- configure
+++ configure 2017-04-03 08:35:03.194142314 +0000
@@ -5925,7 +5925,7 @@ case $cf_cv_system_name in
fi
;;
(linux*|gnu*|k*bsd*-gnu|freebsd*)
- LD_RPATH_OPT="-Wl,-rpath,"
+ LD_RPATH_OPT="-Wl,-rpath-link,"
;;
(openbsd[2-9].*|mirbsd*)
LD_RPATH_OPT="-Wl,-rpath,"
@@ -11891,12 +11891,15 @@ cat >>$cf_edit_man <<CF_EOF
echo '? missing rename for '\$cf_source
cf_target="\$cf_source"
fi
- cf_target="\$cf_subdir\${section}/\${cf_target}"
-
CF_EOF
fi
cat >>$cf_edit_man <<CF_EOF
+for t in \$cf_target; do
+ t="\$cf_subdir\${section}/\${t}"
+CF_EOF
+
+cat >>$cf_edit_man <<CF_EOF
sed -f $cf_man_alias \\
CF_EOF
@@ -11906,7 +11909,7 @@ cat >>$cf_edit_man <<CF_EOF
CF_EOF
else
cat >>$cf_edit_man <<CF_EOF
- < \$i >\$TMP
+ < \$i | sed -f $srcdir/edit_man.sed >\$TMP
CF_EOF
fi
@@ -11946,7 +11949,7 @@ cat >>$cf_edit_man <<CF_EOF
mv \$TMP.$cf_so_strip \$TMP
fi
fi
- cf_target="\$cf_target.$cf_so_strip"
+ t="\$t.$cf_so_strip"
CF_EOF
fi
@@ -11955,23 +11958,23 @@ case "$MANPAGE_FORMAT" in
cat >>$cf_edit_man <<CF_EOF
if test \$form = format ; then
# BSDI installs only .0 suffixes in the cat directories
- cf_target="\`echo \$cf_target|sed -e 's/\.[1-9]\+[a-z]*/.0/'\`"
+ t="\`echo \$t|sed -e 's/\.[1-9]\+[a-z]*/.0/'\`"
fi
CF_EOF
;;
esac
cat >>$cf_edit_man <<CF_EOF
- suffix=\`basename \$cf_target | sed -e 's%^[^.]*%%'\`
+ suffix=\`basename \$t | sed -e 's%^[^.]*%%'\`
if test \$verb = installing ; then
- echo \$verb \$cf_target
- \$INSTALL_DATA \$TMP \$cf_target
+ echo \$verb \$t
+ \$INSTALL_DATA \$TMP \$t
test -d \$cf_subdir\${section} &&
test -n "\$aliases" && (
cd \$cf_subdir\${section} && (
- cf_source=\`echo \$cf_target |sed -e 's%^.*/\([^/][^/]*/[^/][^/]*$\)%\1%'\`
+ cf_source=\`echo \$t |sed -e 's%^.*/\([^/][^/]*/[^/][^/]*$\)%\1%'\`
test -n "$cf_so_strip" && cf_source=\`echo \$cf_source |sed -e 's%\.$cf_so_strip\$%%'\`
- cf_target=\`basename \$cf_target\`
+ t=\`basename \$t\`
for cf_alias in \$aliases
do
if test \$section = 1 ; then
@@ -11980,7 +11983,7 @@ cat >>$cf_edit_man <<CF_EOF
if test "$MANPAGE_SYMLINKS" = yes ; then
if test -f \$cf_alias\${suffix} ; then
- if ( cmp -s \$cf_target \$cf_alias\${suffix} )
+ if ( cmp -s \$t \$cf_alias\${suffix} )
then
continue
fi
@@ -11990,18 +11993,18 @@ CF_EOF
case "x$LN_S" in
(*-f)
cat >>$cf_edit_man <<CF_EOF
- $LN_S \$cf_target \$cf_alias\${suffix}
+ $LN_S \$t \$cf_alias\${suffix}
CF_EOF
;;
(*)
cat >>$cf_edit_man <<CF_EOF
rm -f \$cf_alias\${suffix}
- $LN_S \$cf_target \$cf_alias\${suffix}
+ $LN_S \$t \$cf_alias\${suffix}
CF_EOF
;;
esac
cat >>$cf_edit_man <<CF_EOF
- elif test "\$cf_target" != "\$cf_alias\${suffix}" ; then
+ elif test "\$t" != "\$cf_alias\${suffix}" ; then
echo ".so \$cf_source" >\$TMP
CF_EOF
if test -n "$cf_compress" ; then
@@ -12021,9 +12024,9 @@ cat >>$cf_edit_man <<CF_EOF
)
)
elif test \$verb = removing ; then
- test -f \$cf_target && (
- echo \$verb \$cf_target
- rm -f \$cf_target
+ test -f \$t && (
+ echo \$verb \$t
+ rm -f \$t
)
test -d \$cf_subdir\${section} &&
test -n "\$aliases" && (
@@ -12043,6 +12046,7 @@ cat >>$cf_edit_man <<CF_EOF
# echo ".hy 0"
cat \$TMP
fi
+done
;;
esac
done
@@ -22742,6 +22746,7 @@ if test "$with_termlib" != no ; then
TINFO_LDFLAGS="-L${LIB_DIR}"
SHLIB_LIST="$SHLIB_LIST -l${TINFO_LIB_SUFFIX}"
fi
+ TINFO_ARGS="$TINFO_ARGS -L${LIB_DIR} -l${LIB_NAME}${DFT_ARG_SUFFIX}"
else
# the next lines are needed for linking libtic over libncurses
TINFO_NAME=${LIB_NAME}
--- include/curses.h.in
+++ include/curses.h.in 2017-04-03 08:35:03.194142314 +0000
@@ -177,6 +177,9 @@ typedef @cf_cv_typeof_chtype@ chtype;
typedef @cf_cv_typeof_mmask_t@ mmask_t;
#endif
+#include <features.h>
+#include <sys/types.h>
+
/*
* We need FILE, etc. Include this before checking any feature symbols.
*/
--- include/termcap.h.in
+++ include/termcap.h.in 2017-04-03 08:35:03.194142314 +0000
@@ -46,6 +46,8 @@ extern "C"
{
#endif /* __cplusplus */
+#include <features.h>
+#include <termios.h>
#include <sys/types.h>
#undef NCURSES_CONST
--- include/tic.h
+++ include/tic.h 2017-04-03 08:35:03.194142314 +0000
@@ -205,12 +205,12 @@ struct alias
*/
/* out-of-band values for representing absent capabilities */
-#define ABSENT_BOOLEAN ((signed char)-1) /* 255 */
+#define ABSENT_BOOLEAN (-1) /* 255 */
#define ABSENT_NUMERIC (-1)
#define ABSENT_STRING (char *)0
/* out-of-band values for representing cancels */
-#define CANCELLED_BOOLEAN ((signed char)-2) /* 254 */
+#define CANCELLED_BOOLEAN (-2) /* 254 */
#define CANCELLED_NUMERIC (-2)
#define CANCELLED_STRING (char *)(-1)
--- man/man_db.renames
+++ man/man_db.renames 2017-04-03 08:35:03.194142314 +0000
@@ -162,6 +162,7 @@ term.7 term.7
term_variables.3x terminfo_variables.3ncurses
terminfo.5 terminfo.5
terminfo.\\\*n terminfo.5
+curs_terminfo.\\\*n terminfo.5
tic.1m tic.1
toe.1m toe.1
tput.1 tput.1
@@ -170,6 +171,7 @@ vprintf.3 vprintf.3
wresize.3x wresize.3ncurses
#
# Other:
+tack.1 tack.1
tack.1m tack.1
#
getty.1 getty.8
--- man/ncurses.3x
+++ man/ncurses.3x 2017-04-03 08:35:03.194142314 +0000
@@ -134,6 +134,10 @@ after the shell environment variable \fB
[See \fBterminfo\fR(\*n) for further details.]
.SS Datatypes
.PP
+Beware: the terminal your program is running may or may not have
+the features you expect. Ncurses makes no attempt to check available
+features in advance. This is upon the programmer.
+.PP
The \fBncurses\fR library permits manipulation of data structures,
called \fIwindows\fR, which can be thought of as two-dimensional
arrays of characters representing all or part of a CRT screen.
--- misc/gen-pkgconfig.in
+++ misc/gen-pkgconfig.in 2017-04-03 08:35:03.194142314 +0000
@@ -76,7 +76,7 @@ if test "$includedir" != "/usr/include"
fi
LDFLAGS=
-if test "$libdir" != "/usr/lib" ; then
+if test "$libdir" != "/usr/lib" -a "$libdir" != "/usr/lib64" ; then
LDFLAGS="$LDFLAGS -L\${libdir}"
fi
if test "x@EXTRA_LDFLAGS@" != "x" ; then
@@ -110,6 +110,7 @@ do
LIBS="-l$name"
desc="ncurses @NCURSES_MAJOR@.@NCURSES_MINOR@"
+ deps=
reqs=
if test $name = $MAIN_LIBRARY ; then
@@ -119,9 +120,11 @@ do
desc="$desc terminal interface library"
elif expr $name : ".*${CXX_NAME}.*" >/dev/null ; then
reqs="$PANEL_LIBRARY${suffix}, $MENU_LIBRARY${suffix}, $FORM_LIBRARY${suffix}, $MAIN_LIBRARY${suffix}"
+ deps="-l$PANEL_LIBRARY -l$MENU_LIBRARY -l$FORM_LIBRARY -l$MAIN_LIBRARY"
desc="$desc add-on library"
else
reqs="$MAIN_LIBRARY${suffix}"
+ deps="-l$MAIN_LIBRARY"
desc="$desc add-on library"
fi
@@ -131,6 +134,8 @@ do
test $NEED_TINFO != yes ; then
test -n "$reqs" && reqs="$reqs, "
reqs="${reqs}${SUB_LIBRARY}${suffix}"
+ test -n "$deps" && deps="$deps "
+ deps="${deps}-l${SUB_LIBRARY}"
fi
echo "** creating ${name}${suffix}.pc"
--- misc/ncurses-config.in
+++ misc/ncurses-config.in 2017-04-03 08:35:03.194142314 +0000
@@ -100,7 +100,7 @@ while test $# -gt 0; do
# compile/link
--cflags)
INCS="@PKG_CFLAGS@"
- if test "x@WITH_OVERWRITE@" = xno ; then
+ if test "${THIS%[0-5]*}" = xno ; then
INCS="$INCS -I${includesubdir}"
fi
if test "${includedir}" != /usr/include ; then
--- misc/terminfo.src
+++ misc/terminfo.src 2017-04-03 08:35:03.250141276 +0000
@@ -301,7 +301,9 @@ dumb|80-column dumb tty,
am,
cols#80,
bel=^G, cr=^M, cud1=^J, ind=^J,
-unknown|unknown terminal type,
+unknown|switch|patch|unknown terminal type,
+ gn, use=dumb,
+net|network|arpanet|dialup|unknown network terminal type,
gn, use=dumb,
lpr|printer|line printer,
OTbs, hc, os,
@@ -1350,7 +1352,7 @@ nsterm|Apple_Terminal|AppKit Terminal.ap
#
# NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
# disabled.
-iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
+iTerm.app|iTerm.app terminal emulator for Mac OS X,
bce, bw@,
csr@, dim@, kend=\EOF, khome=\EOH,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
@@ -1740,9 +1742,15 @@ linux-c|linux console 1.3.6+ for older n
# The 2.2.x kernels add a private mode that sets the cursor type; use that to
# get a block cursor for cvvis.
# reported by Frank Heckenbach <frank@g-n-u.de>.
+#
+# Do not use a block cursor, <werner@suse.de>
+# This because many programs do have a workaround for the long time
+# missed cvvis entry. A `\E[?1c' in civis will cause a visible but
+# zero high cusor ... re-add it for kernels 2.6.11+
+#
linux2.2|linux 2.2.x console,
civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
- cvvis=\E[?25h\E[?8c, use=linux-c-nc,
+ cvvis=\E[?25h\E[?0c, use=linux-c-nc,
# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
# http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
@@ -1757,6 +1765,7 @@ linux2.6|linux 2.6.x console,
acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
xyyzz{{||}c~~,
enacs=\E)0, rmacs=^O,
+ cvvis=\E[?25h\E[?8c,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, use=linux2.2,
@@ -3215,6 +3224,7 @@ vt132|DEC vt132,
# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
# PF1--PF4 are used as F1--F4.
+# (cvvis added by werner)
#
# added msgr -TD
vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
@@ -3225,7 +3235,7 @@ vt220-old|vt200-old|DEC VT220 in vt100 e
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, cvvis=\E[?25h, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
@@ -3386,6 +3396,7 @@ vt320nam|v320n|DEC VT320 in vt100 emul.
# to SMASH the 1k-barrier...
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
# (vt320: uncommented <fsl> --esr)
+# (cvvis added by werner)
vt320|vt300|dec vt320 7 bit terminal,
am, hs, mir, msgr, xenl,
cols#80, lines#24, wsl#80,
@@ -3395,7 +3406,7 @@ vt320|vt300|dec vt320 7 bit terminal,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
@@ -3867,6 +3878,7 @@ putty+fnkeys+sco|SCO fn-keys for PuTTY,
# retrieving the window title, and for setting the window size (i.e., using
# "resize -s"), though it does not pass SIGWINCH to the application if the
# user resizes the window with the mouse.
+# (cvvis added by werner)
teraterm2.3|Tera Term Pro,
km, xon@,
ncv#43, vt@,
@@ -3875,7 +3887,7 @@ teraterm2.3|Tera Term Pro,
\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ cuu1=\E[A, cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
@@ -4081,6 +4093,7 @@ xterm-old|antique xterm version,
use=xterm-r6,
# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
# The name has been changed and some aliases have been removed.
+# (cvvis added by werner)
xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
OTbs, am, bce, km, mir, msgr, xenl, XT,
cols#80, it#8, lines#24, ncv@,
@@ -4090,7 +4103,7 @@ xterm-xf86-v32|xterm terminal emulator (
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
@@ -4584,8 +4597,26 @@ xterm-noapp|xterm with cursor keys in no
xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
lines#24, use=xterm-old,
+# For SuSE Linux: Werner Fink <werner@suse.de>
+# Note that the modern xterm does not use escape sequences
+# for the numbers on the numpad keys in case of switched
+# into application mode and with numlock enabled.
+# To test this, use `tput smkx' and `Ctrl-V + key stroke'
+xterm-suse|xterm terminal emulator (X.Org X11R7.7 Window System with SuSE LINUX),
+ kbs=\177, kdch1=\E[3~,
+ kDIV=\EOo, kMUL=\EOj, kMIN=\EOm, kPLS=\EOk,
+ kfnd=\E[1~, kslt=\E[4~,
+ use=xterm-new,
+
# This is xterm for ncurses.
xterm|xterm terminal emulator (X Window System),
+ use=xterm-suse,
+
+# xterm-debian is identical to xterm-new with the addition of a small
+# VT220-ism regarding the backspace and delete keys; this is mandated by
+# the keyboard configuration section of the Debian Policy Manual.
+xterm-debian|Debian xterm (backspace and delete changed),
+ kbs=\177, kdch1=\E[3~,
use=xterm-new,
# This entry assumes that xterm's handling of VT100 SI/SO is disabled by
@@ -4928,7 +4959,7 @@ xterms-sun|small (80x24) xterm with sunF
#### GNOME (VTE)
# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
-gnome-rh62|Gnome terminal,
+gnome-rh62|Gnome terminal on Red Hat,
bce,
kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
use=xterm-color,
@@ -5104,10 +5135,14 @@ mgt|Multi GNOME Terminal,
#### KDE
# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
# or not is debatable).
-kvt|KDE terminal,
+kvt-rh|KDE terminal,
bce, km@,
kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
+# This is kvt for SuSE because we do not support BrokenByDesign[tm].
+kvt|KDE terminal,
+ kbs=\177, kdch1=\E[3~, use=kvt-rh,
+
# Konsole 1.0.1
# (formerly known as kvt)
#
@@ -5238,14 +5273,14 @@ mlterm3|multi lingual terminal emulator,
mlterm2|multi lingual terminal emulator,
am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
colors#8, cols#80, it#8, lines#24, pairs#64,
- acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
+ cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
@@ -5301,6 +5336,7 @@ mlterm-256color|mlterm 3.0 with xterm 25
# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
# Since rxvt is not really compatible with xterm, it should be configured as
# "rxvt" or "rxvt-color".
+# (cvvis added by werner)
#
# removed dch/dch1 because they are inconsistent with bce/ech -TD
# remove km as per tack test -TD
@@ -5312,13 +5348,14 @@ rxvt-basic|rxvt terminal base (X Window
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l,
- is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
- kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=\177, kcbt=\E[Z,
+ kmous=\E[M, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
+ rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
rmul=\E[24m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
@@ -5329,7 +5366,7 @@ rxvt-basic|rxvt terminal base (X Window
%p9%t\016%e\017%;,
sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
- use=rxvt+pcfkeys, use=vt220+keypad,
+ use=vt220+keypad, use=rxvt+pcfkeys,
# Key Codes from rxvt reference:
#
# Note: Shift + F1-F10 generates F11-F20
@@ -5412,8 +5449,8 @@ rxvt-basic|rxvt terminal base (X Window
# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
rxvt+pcfkeys|fragment for PC-style fkeys,
kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
- kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
+ kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kel=\E[8\^,
kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
@@ -5474,6 +5511,38 @@ rxvt-cygwin-native|rxvt terminal emulato
\302x\263y\363z\362{\343|\330~\376,
use=rxvt-cygwin,
+# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
+# Updated: Özgür Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
+# Updated: Marc Lehmann <pcg@goof.com>, 17 Feb 2005
+# Updated: Marc Lehmann <schmorp@schmorp.de>, 04 Nov 2008: change init/reset sequences
+#
+rxvt-unicode|rxvt-unicode terminal (X Window System),
+ bw, ccc, hs, mc5i, npc, btns#5, colors#88, lm#0, ncv#0, pairs#256,
+ acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ dsl=\E]2;\007, ech=\E[%p1%dX, enacs=, flash=\E[?5h$<20/>\E[?5l,
+ fsl=^G, indn=\E[%p1%dS,
+ initc=\E]4;%p1%d;rgb\:%p2%{65535}%*%{1000}%/%4.4X/%p3%{65535}%*%{1000}%/%4.4X/%p4%{65535}%*%{1000}%/%4.4X\E\\,
+ is1=\E[!p,
+ is2=\E[r\E[m\E[2J\E[?7;25h\E[?1;3;4;5;6;9;66;1000;1001;1049l\E[4l,
+ kIC=\E2$, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, op=\E[39;49m,
+ rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l,
+ rmcup=\E[r\E[?1049l, rmkx=\E[?1l\E>, rs1=\Ec,
+ rs2=\E[r\E[m\E[?7;25h\E[?1;3;4;5;6;9;66;1000;1001;1049l\E[4l,
+ s2ds=\E*B, s3ds=\E+B,
+ setab=\E[48;5;%p1%dm, setaf=\E[38;5;%p1%dm,
+ setb=%?%p1%{7}%>%t\E[48;5;%p1%dm%e\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m%;,
+ setf=%?%p1%{7}%>%t\E[38;5;%p1%dm%e\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m%;,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[m\E(B, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
+ smcup=\E[?1049h, smkx=\E[?1h\E=,
+ tsl=\E]2;, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ use=rxvt-basic,
+
+rxvt-unicode-256color|rxvt-unicode terminal with 256 colors (X Window System),
+ colors#256,
+ pairs#32767,
+ use=rxvt-unicode,
+
# This variant is supposed to work with rxvt 2.7.7 when compiled with
# NO_BRIGHTCOLOR defined. rxvt needs more work...
rxvt-16color|rxvt with 16 colors like aixterm,
@@ -5520,7 +5589,7 @@ mrxvt-256color|multitabbed rxvt with 256
# Eterm 0.9.3
#
# removed kf0 which conflicts with kf10 -TD
-# remove cvvis which conflicts with cnorm -TD
+# remove cvvis which conflicts with cnorm -TD (and re-added by werner)
# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
# but does otherwise follow the rxvt+pcfkeys model -TD
# remove nonworking flash -TD
@@ -5534,13 +5603,13 @@ Eterm|Eterm-color|Eterm with xterm-style
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\E[?47l\E>\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
- kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
+ kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=\177,
kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
@@ -6145,7 +6214,7 @@ pty|4bsd pseudo teletype,
# https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
#
# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
-eterm|gnu emacs term.el terminal emulation,
+eterm-19|gnu emacs term.el terminal emulation,
am, mir, xenl,
cols#80, lines#24,
bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
@@ -6158,6 +6227,13 @@ eterm|gnu emacs term.el terminal emulati
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
smul=\E[4m,
+eterm|emacs|gnu emacs term.el terminal emulation,
+ colors#8, pairs#64,
+ invis=\E[8m, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kend=\E[4~,
+ khome=\E[1~, knp=\E[6~, kpp=\E[5~,
+ setab=\E[%p1%{40}%+%dm, setaf=\E[%p1%{30}%+%dm,
+ use=eterm-19,
# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
@@ -6280,7 +6356,7 @@ screen|VT 100/ANSI X3.64 virtual termina
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\Eg, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0,
- kbs=^H, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
@@ -6480,7 +6556,7 @@ screen2|old VT 100/ANSI X3.64 virtual te
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
- il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ il1=\E[L, ind=^J, kbs=\177, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
@@ -8339,7 +8415,7 @@ hp700-wy|HP700/41 emulating wyse30,
ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
-hp70092|hp70092a|hp70092A|HP 700/92,
+hp70092|hp70092a|hp70092A|70092|HP 700/92,
am, da, db, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
@@ -11560,6 +11636,7 @@ msk22714|mskermit22714|UCB MS-DOS Kermit
# at support for the VT320 itself.
# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
+# (cvvis added by werner)
vt320-k3|MS-Kermit 3.00's vt320 emulation,
am, eslok, hs, km, mir, msgr, xenl,
cols#80, it#8, lines#49, pb#9600, vt#3,
@@ -11569,7 +11646,7 @@ vt320-k3|MS-Kermit 3.00's vt320 emulatio
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
?5l,
@@ -15986,7 +16063,7 @@ ibm3101|i3101|IBM 3101-10,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
-ibm3151|IBM 3151 display,
+ibm3151|i3151|IBM 3151 display,
is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
@@ -16244,7 +16321,7 @@ lft|lft-pc850|LFT-PC850|IBM LFT PC850 De
tbc=\E[3g,
# "Megapel" refers to the display adapter, which was used with the IBM RT
# aka IBM 6150.
-ibm5081|hft|IBM Megapel Color display,
+ibm5081|ibmmpel|hft|IBM Megapel Color display,
acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
--- ncurses/Makefile.in
+++ ncurses/Makefile.in 2017-04-03 08:35:03.198142240 +0000
@@ -218,7 +218,7 @@ $(DESTDIR)$(libdir) :
../lib : ; mkdir $@
./fallback.c : $(tinfo)/MKfallback.sh
- $(SHELL) -e $(tinfo)/MKfallback.sh $(TERMINFO) $(TERMINFO_SRC) $(TIC_PATH) $(FALLBACK_LIST) >$@
+ $(SHELL) -e $(srcdir)/run_cmd.sh $(tinfo)/MKfallback.sh $(TERMINFO) $(TERMINFO_SRC) $(TIC_PATH) $(FALLBACK_LIST) >$@
./lib_gen.c : $(base)/MKlib_gen.sh ../include/curses.h
$(SHELL) -e $(base)/MKlib_gen.sh "$(CPP) $(CPPFLAGS)" "$(AWK)" generated <../include/curses.h >$@
--- ncurses/curses.priv.h
+++ ncurses/curses.priv.h 2017-04-03 08:35:03.198142240 +0000
@@ -2049,6 +2049,8 @@ extern NCURSES_EXPORT(char *) _nc_tracec
extern NCURSES_EXPORT(char *) _nc_tracemouse (SCREEN *, MEVENT const *);
extern NCURSES_EXPORT(char *) _nc_trace_mmask_t (SCREEN *, mmask_t);
extern NCURSES_EXPORT(int) _nc_access (const char *, int);
+extern NCURSES_EXPORT(void) _nc_fsid(void);
+extern NCURSES_EXPORT(void) _nc_fseid(void);
extern NCURSES_EXPORT(int) _nc_baudrate (int);
extern NCURSES_EXPORT(int) _nc_freewin (WINDOW *);
extern NCURSES_EXPORT(int) _nc_getenv_num (const char *);
--- ncurses/run_cmd.sh
+++ ncurses/run_cmd.sh 2017-04-03 08:35:03.198142240 +0000
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+PATH=$PWD/../progs:$PATH
+if test -n "$LD_LIBRARY_PATH"; then
+ LD_LIBRARY_PATH="$PWD/../lib:$LD_LIBRARY_PATH"
+else
+ LD_LIBRARY_PATH="$PWD/../lib"
+fi
+export PATH LD_LIBRARY_PATH
+
+exec ${1+"$@"}
--- ncurses/tinfo/MKfallback.sh
+++ ncurses/tinfo/MKfallback.sh 2017-04-03 08:35:03.198142240 +0000
@@ -68,6 +68,12 @@ else
tmp_info=
fi
+if test -n "$TERMINFO" -a -d "$TERMINFO" ; then
+ infocmp="infocmp -v1 -A $TERMINFO"
+else
+ infocmp="infocmp -v1"
+fi
+
cat <<EOF
/* This file was generated by $0 */
@@ -89,7 +95,7 @@ EOF
for x in $*
do
echo "/* $x */"
- infocmp -E $x
+ $infocmp -E $x
done
cat <<EOF
@@ -100,7 +106,7 @@ EOF
for x in $*
do
echo "$comma /* $x */"
- infocmp -e $x
+ $infocmp -e $x
comma=","
done
--- ncurses/tinfo/access.c
+++ ncurses/tinfo/access.c 2017-04-03 08:35:03.198142240 +0000
@@ -35,6 +35,9 @@
#include <ctype.h>
#include <tic.h>
+#ifdef linux
+# include <sys/fsuid.h>
+#endif
MODULE_ID("$Id: access.c,v 1.23 2012/09/01 19:21:29 tom Exp $")
@@ -112,6 +115,30 @@ _nc_basename(char *path)
return path + _nc_pathlast(path);
}
+NCURSES_EXPORT(void)
+_nc_fsid()
+{
+#ifdef linux
+ int _old_errno = errno;
+ setfsuid(getuid());
+ setfsgid(getgid());
+ errno = _old_errno;
+#endif
+ return;
+}
+
+NCURSES_EXPORT(void)
+_nc_fseid()
+{
+#ifdef linux
+ int _old_errno = errno;
+ setfsuid(geteuid());
+ setfsgid(getegid());
+ errno = _old_errno;
+#endif
+ return;
+}
+
NCURSES_EXPORT(int)
_nc_access(const char *path, int mode)
{
--- ncurses/tinfo/lib_setup.c
+++ ncurses/tinfo/lib_setup.c 2017-04-03 08:35:03.198142240 +0000
@@ -593,6 +593,9 @@ _nc_locale_breaks_acs(TERMINAL * termp)
} else if ((value = tigetnum("U8")) >= 0) {
result = value; /* use extension feature */
} else if ((env = getenv("TERM")) != 0) {
+ char *yast = getenv("YAST_DOES_ACS");
+ if (yast != 0)
+ return 0; /* YaST uses always correct font mappings */
if (strstr(env, "linux")) {
result = 1; /* always broken */
} else if (strstr(env, "screen") != 0
--- ncurses/tinfo/read_entry.c
+++ ncurses/tinfo/read_entry.c 2017-04-03 08:35:03.198142240 +0000
@@ -431,6 +431,7 @@ _nc_read_file_entry(const char *const fi
FILE *fp = 0;
int code;
+ _nc_fsid();
if (_nc_access(filename, R_OK) < 0
|| (fp = fopen(filename, "rb")) == 0) {
TR(TRACE_DATABASE, ("cannot open terminfo %s (errno=%d)", filename, errno));
@@ -451,6 +452,7 @@ _nc_read_file_entry(const char *const fi
}
fclose(fp);
}
+ _nc_fseid();
return (code);
}
--- ncurses/tinfo/read_termcap.c
+++ ncurses/tinfo/read_termcap.c 2017-04-03 08:35:03.198142240 +0000
@@ -322,14 +322,18 @@ _nc_getent(
*/
if (fd >= 0) {
(void) lseek(fd, (off_t) 0, SEEK_SET);
- } else if ((_nc_access(db_array[current], R_OK) < 0)
- || (fd = open(db_array[current], O_RDONLY, 0)) < 0) {
- /* No error on unfound file. */
- if (errno == ENOENT)
- continue;
- free(record);
- return (TC_SYS_ERR);
} else {
+ _nc_fsid();
+ if ((_nc_access(db_array[current], R_OK) < 0) ||
+ (fd = open(db_array[current], O_RDONLY, 0)) < 0) {
+ _nc_fseid();
+ /* No error on unfound file. */
+ if (errno == ENOENT)
+ continue;
+ free(record);
+ return (TC_SYS_ERR);
+ }
+ _nc_fseid();
myfd = TRUE;
}
lineno = 0;
@@ -1118,8 +1122,10 @@ _nc_read_termcap_entry(const char *const
for (i = 0; i < filecount; i++) {
TR(TRACE_DATABASE, ("Looking for %s in %s", tn, termpaths[i]));
+ _nc_fsid();
if (_nc_access(termpaths[i], R_OK) == 0
&& (fp = fopen(termpaths[i], "r")) != (FILE *) 0) {
+ _nc_fseid();
_nc_set_source(termpaths[i]);
/*
@@ -1131,6 +1137,7 @@ _nc_read_termcap_entry(const char *const
(void) fclose(fp);
}
+ _nc_fseid();
}
}
if (copied != 0)
--- test/test.priv.h
+++ test/test.priv.h 2017-04-03 08:35:03.198142240 +0000
@@ -798,12 +798,12 @@ extern char *strnames[], *strcodes[], *s
#endif
/* out-of-band values for representing absent capabilities */
-#define ABSENT_BOOLEAN ((signed char)-1) /* 255 */
+#define ABSENT_BOOLEAN (char)-1) /* 255 */
#define ABSENT_NUMERIC (-1)
#define ABSENT_STRING (char *)0
/* out-of-band values for representing cancels */
-#define CANCELLED_BOOLEAN ((signed char)-2) /* 254 */
+#define CANCELLED_BOOLEAN (-2) /* 254 */
#define CANCELLED_NUMERIC (-2)
#define CANCELLED_STRING (char *)(-1)