Accepting request 235663 from Base:System

- use nologin from upstream (was added in 2.24) 
- remove unknown configure options
- remove unused and outdated suse READMEs
- require bc for checks (forwarded request 235657 from rudi_m)

OBS-URL: https://build.opensuse.org/request/show/235663
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/util-linux?expand=0&rev=187

README.largedisk

@@ -1,12 +0,0 @@
-Some hints on fdisk and large disks (> 2TB)
--------------------------------------------
-
-Note that fdisk only supports legacy partition tables.
-Legacy partition tables (like DOS) use 32 bit LBA addressing,
-which means that you can only address partitions with a starting 
-sector and a size with a maximum of 2**32 sectors = 2TB.
-This means you can not create partitions that are greater than 2TB 
-with fdisk!
-If you want to use partition sizes above this limit, you need to use
-GUID Partition Tables (GPT) which use 64 bit LBA addressing.
-They are supported by parted.

README.raw

@@ -1,54 +0,0 @@
-Raw device driver support on SLS 9
-
-On SLS 9, you will notice that by default, raw devices (nodes) (/dev/rawctl
-and /dev/raw/rawN (1-15)) no longer exist whereas in SLES 8, the raw nodes were
-created when the system was initially installed. SLS 9, by default, uses
-the new dynamic userspace implementation "sysfs" together with "udev" which
-replaces the previous static "dev" system.
-
-Raw devices are moving towards eventual obsolescence with block+O_DIRECT
-support intended as a replacement. The primary application users of raw
-character devices have been databases so the database you are using will have
-to support the O_DIRECT functionality before moving away from raw character
-devices.
-
-Using RAW with kernel 2.6 (SLS 9)
----------------------------------
-Raw device usage in kernel 2.6 together with udev and sysfs was intended to be
-quite seamless. Basically, all that is required is to load the raw module after
-each reboot using the commands "modprobe raw" or "rcraw start".  Then use the
-"raw" command to create the bindings to the block character devices.  The raw
-device nodes are no longer required to exist before the bindings are assigned
-and used.
-
-Using a single script, you can you load the raw module and bind the raw nodes
-to block devices.
-
-#!/usr/bin
-# load the raw module
-modprobe raw  # can also use "rcraw start"
-# create the raw bindings
-raw /dev/raw/raw1 /dev/sdb1
-raw /dev/raw/raw2 /dev/sbc1
-
-You can see if the raw driver is available by issuing "rcraw status". If the
-raw driver is loaded, the command should return a status of "running". A status
-of "dead" will usually indicate that the driver was not loaded or
-the /dev/rawctl file does not exist. The /dev/rawctl file is automatically
-created when the module is loaded. This file and the /dev/raw/rawN nodes can
-also be viewed under the /sys/class/raw directory.
-
-Raw node permissions
-----------------------------------
-When the raw devices are assigned,  permission settings are determined from the
-/etc/udev/udev.permission file.  This file can be modified to assign different
-owner, group and/or access permissions to the raw nodes.  For example, by
-default, the permission settings for raw nodes are as follows:
-
-raw/raw*:root:disk:660
-
-Here, root:disk is the default owner:group with read write access for owner and
-group.  As an example, to create the raw nodes with an owner:group of
-user1:group1 and read write access for all, change the assignment as follows:
-
-raw/raw*:user1:group1:666

nologin.8

@@ -1,63 +0,0 @@
-.\"	$OpenBSD: nologin.8,v 1.8 1999/06/04 02:45:19 aaron Exp $
-.\"	$NetBSD: nologin.8,v 1.3 1995/03/18 14:59:09 cgd Exp $
-.\"
-.\" Copyright (c) 1993
-.\"	The Regents of the University of California.  All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by the University of
-.\"	California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\"     @(#)nologin.8	8.1 (Berkeley) 6/19/93
-.\"
-.Dd February 15, 1997
-.Dt NOLOGIN 8
-.Os
-.Sh NAME
-.Nm nologin
-.Nd politely refuse a login
-.Sh SYNOPSIS
-.Nm nologin
-.Sh DESCRIPTION
-.Nm
-displays a message that an account is not available and
-exits non-zero.
-It is intended as a replacement shell field for accounts that
-have been disabled.
-.Pp
-If the file
-.Pa /etc/nologin.txt
-exists,
-.Nm
-displays its contents to the user instead of the default message.
-.Sh SEE ALSO
-.Xr login 1
-.Sh HISTORY
-The
-.Nm
-command appeared in
-.Bx 4.4 .

nologin.c

@@ -1,58 +0,0 @@
-/*	$OpenBSD: nologin.c,v 1.2 1997/04/04 16:51:37 millert Exp $	*/
-
-/*
- * Copyright (c) 1997, Jason Downs.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <sys/types.h>
-#include <fcntl.h>
-#include <string.h>
-#include <unistd.h>
-#include <stdlib.h>
-
-/* Distinctly different from _PATH_NOLOGIN. */
-#define _PATH_NOLOGIN_TXT	"/etc/nologin.txt"
-
-#define DEFAULT_MESG	"This account is currently not available.\n"
-
-/*ARGSUSED*/
-int main(argc, argv)
-	int argc;
-	char *argv[];
-{
-	int nfd, nrd;
-	char nbuf[128];
-
-	nfd = open(_PATH_NOLOGIN_TXT, O_RDONLY);
-	if (nfd < 0) {
-		write(STDOUT_FILENO, DEFAULT_MESG, strlen(DEFAULT_MESG));
-		exit (1);
-	}
-
-	while ((nrd = read(nfd, nbuf, sizeof(nbuf))) > 0)
-		write(STDOUT_FILENO, nbuf, nrd);
-	close (nfd);
-
-	exit (1);
-}

util-linux.changes

@@ -1,3 +1,11 @@
+-------------------------------------------------------------------
+Tue May 27 21:17:40 UTC 2014 - sweet_f_a@gmx.de
+
+- use nologin from upstream (was added in 2.24) 
+- remove unknown configure options
+- remove unused and outdated suse READMEs
+- require bc for checks
+
 -------------------------------------------------------------------
 Fri May 16 15:10:53 UTC 2014 - sweet_f_a@gmx.de
 

util-linux.spec

@@ -23,6 +23,7 @@
 
 Name:           util-linux
 BuildRequires:  audit-devel
+BuildRequires:  bc
 BuildRequires:  binutils-devel
 BuildRequires:  fdupes
 BuildRequires:  gettext-devel
@@ -67,9 +68,6 @@ License:        GPL-2.0+
 Group:          System/Base
 Source:         ftp://ftp.kernel.org/pub/linux/utils/util-linux/v2.24/%{name}-%{version}.tar.xz
 Source1:        util-linux-rpmlintrc
-# XXX: make nologin part of util-linux upstream
-Source2:        nologin.c
-Source3:        nologin.8
 Source4:        raw.init
 Source5:        etc.raw
 Source6:        etc_filesystems
@@ -90,8 +88,6 @@ Source28:       mkzimage_cmdline.8
 Source29:       mkzimage_cmdline.c
 Source31:       addnote.c
 #
-Source26:       README.raw
-Source30:       README.largedisk
 Source50:       uuidd.rc
 Source51:       blkid.conf
 ##
@@ -269,8 +265,6 @@ xzcat %{S:0} | %gpg_verify %{S:12} -
 #
 # setctsid
 cp -p %{S:22} %{S:23} .
-# nologin
-cp -p %{S:2} %{S:3} %{S:26} %{S:30} .
 
 pushd ../klogconsole
 %patch55 -p1
@@ -318,8 +312,6 @@ export SUID_LDFLAGS="-pie"
   --enable-raw \
   --enable-write \
   --enable-line \
-  --enable-new-mount \
-  --enable-login-utils \
   --enable-tunelp \
   --enable-socket-activation \
 %if %{with enable_last}
@@ -327,7 +319,6 @@ export SUID_LDFLAGS="-pie"
 %else
   --disable-last \
 %endif
-  --enable-logger \
 %if %{with enable_eject}
   --enable-eject \
 %else
@@ -355,7 +346,6 @@ export SUID_LDFLAGS="-pie"
 #
 make %{?_smp_mflags}
 #
-%{__cc} -fwhole-program %{optflags} -o nologin nologin.c
 %{__cc} -fwhole-program %{optflags} -o mkzimage_cmdline %{S:29}
 %{__cc} -fwhole-program %{optflags} -o chrp-addnote %{SOURCE31}
 
@@ -388,6 +378,7 @@ popd
 # util-linux install
 #
 %make_install
+rm -f %{buildroot}/%{_libdir}/lib*.la
 #UsrMerge
 %if %{with enable_su}
 ln -s %{_bindir}/kill %{buildroot}/bin
@@ -414,6 +405,7 @@ ln -s %{_sbindir}/mkfs.bfs %{buildroot}/sbin
 ln -s %{_sbindir}/mkfs.minix %{buildroot}/sbin
 ln -s %{_sbindir}/mkfs.cramfs %{buildroot}/sbin
 ln -s %{_sbindir}/mkswap %{buildroot}/sbin
+ln -s %{_sbindir}/nologin %{buildroot}/sbin
 ln -s %{_sbindir}/pivot_root %{buildroot}/sbin
 ln -s %{_sbindir}/raw %{buildroot}/sbin
 ln -s %{_sbindir}/sfdisk %{buildroot}/sbin
@@ -430,19 +422,11 @@ ln -s %{_sbindir}/fstrim %{buildroot}/sbin
 ln -s %{_sbindir}/chcpu %{buildroot}/sbin
 #EndUsrMerge 
 install -m 644 %{SOURCE6} %{buildroot}%{_sysconfdir}/filesystems
-install -m 755 nologin %{buildroot}/%{_sbindir}
-#UsrMerge
-ln -s %{_sbindir}/nologin %{buildroot}/sbin
-#EndUsrMerge 
-rm -f %{buildroot}/%{_libdir}/libblkid.la
-rm -f %{buildroot}/%{_libdir}/libuuid.la
-rm -f %{buildroot}/%{_libdir}/libmount.la
 %ifnarch ppc ppc64
 install -m 755 mkzimage_cmdline %{buildroot}/%{_bindir}
 install -m 644 %{S:28} %{buildroot}%{_mandir}/man8
 install -m 755 chrp-addnote %{buildroot}/%{_bindir}
 %endif
-install -m 644 nologin.8 %{buildroot}%{_mandir}/man8
 # setctsid install
 install -m 755 setctsid   %{buildroot}/%{_sbindir}
 install -m 444 setctsid.8 %{buildroot}%{_mandir}/man8/