Add upstream patch "UnitTestFrameworkPkg: Use TianoCore mirror of
subhook submodule" to edk2, so the submodule can be cloned again.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Newer AMD CPUs support ERAPS (Enhanced Return Address Prediction Security)
feature that enables the auto-clear of RSB entries on a TLB flush, context
switches and VMEXITs. The number of default RSP entries is reflected in
RapSize.
Add the feature bit and feature word to support these features.
CPUID_Fn80000021_EAX
Bits Feature Description
24 ERAPS:
Indicates support for enhanced return address predictor security.
CPUID_Fn80000021_EBX
Bits Feature Description
31-24 Reserved
23:16 RapSize:
Return Address Predictor size. RapSize x 8 is the minimum number
of CALL instructions software needs to execute to flush the RAP.
15-00 MicrocodePatchSize. Read-only.
Reports the size of the Microcode patch in 16-byte multiples.
If 0, the size of the patch is at most 5568 (15C0h) bytes.
Link: https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/programmer-references/57238.zip
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/7c62371fe60af1e9bbd853f5f8e949bf2d908bd0.1729807947.git.babu.moger@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9c07a7af5d)
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
CPUID leaf 0x80000022, i.e. ExtPerfMonAndDbg, advertises new performance
monitoring features for AMD processors. Bit 0 of EAX indicates support
for Performance Monitoring Version 2 (PerfMonV2) features. If found to
be set during PMU initialization, the EBX bits can be used to determine
the number of available counters for different PMUs. It also denotes the
availability of global control and status registers.
Add the required CPUID feature word and feature bit to allow guests to
make use of the PerfMonV2 features.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/a96f00ee2637674c63c61e9fc4dee343ea818053.1729807947.git.babu.moger@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 209b0ac120)
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
According to AMD's Speculative Return Stack Overflow whitepaper (link
below), the hypervisor should synthesize the value of IBPB_BRTYPE and
SBPB CPUID bits to the guest.
Support for this is already present in the kernel with commit
e47d86083c66 ("KVM: x86: Add SBPB support") and commit 6f0f23ef76be
("KVM: x86: Add IBPB_BRTYPE support").
Add support in QEMU to expose the bits to the guest OS.
host:
# cat /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
Mitigation: Safe RET
before (guest):
$ cpuid -l 0x80000021 -1 -r
0x80000021 0x00: eax=0x00000045 ebx=0x00000000 ecx=0x00000000 edx=0x00000000
^
$ cat /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
Vulnerable: Safe RET, no microcode
after (guest):
$ cpuid -l 0x80000021 -1 -r
0x80000021 0x00: eax=0x18000045 ebx=0x00000000 ecx=0x00000000 edx=0x00000000
^
$ cat /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
Mitigation: Safe RET
Reported-by: Fabian Vogt <fvogt@suse.de>
Link: https://www.amd.com/content/dam/amd/en/documents/corporate/cr/speculative-return-stack-overflow-whitepaper.pdf
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240805202041.5936-1-farosas@suse.de
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 0701abbf98)
References: bsc#1228079
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
qemu-ga on a NetBSD -current VM terminates with a SIGSEGV upon receiving
'guest-set-time' command...
Core was generated by `qemu-ga'.
Program terminated with signal SIGSEGV, Segmentation fault.
at ../qga/commands-posix.c:88
88 *str[len] = '\0';
[Current thread is 1 (process 1112)]
(gdb) bt
at ../qga/commands-posix.c:88
action=action@entry=0xcda34b8 "set hardware clock to system time", errp=errp@entry=0xffffff922a70, in_str=0x0)
at ../qga/commands-posix.c:164
errp=errp@entry=0xffffff922ad0) at ../qga/commands-posix.c:304
at qga/qga-qapi-commands.c:193
allow_oob=allow_oob@entry=false, cur_mon=cur_mon@entry=0x0) at ../qapi/qmp-dispatch.c:220
type=type@entry=JSON_RCURLY, x=28, y=1) at ../qobject/json-streamer.c:99
at ../qobject/json-lexer.c:313
buffer=buffer@entry=0xffffff922d10 "{\"execute\":\"guest-set-time\"}\n", size=<optimized out>)
at ../qobject/json-lexer.c:350
buffer=buffer@entry=0xffffff922d10 "{\"execute\":\"guest-set-time\"}\n", size=<optimized out>)
at ../qobject/json-streamer.c:121
at ../qga/channel-posix.c:94
(gdb)
The commandline options used on the host machine...
qemu-system-aarch64 \
-machine type=virt,pflash0=rom \
-m 8G \
-cpu host \
-smp 8 \
-accel hvf \
-device virtio-net-pci,netdev=unet \
-device virtio-blk-pci,drive=hd \
-drive file=netbsd.qcow2,if=none,id=hd \
-netdev user,id=unet,hostfwd=tcp::2223-:22 \
-object rng-random,filename=/dev/urandom,id=viornd0 \
-device virtio-rng-pci,rng=viornd0 \
-serial mon:stdio \
-display none \
-blockdev node-name=rom,driver=file,filename=/opt/homebrew/Cellar/qemu/9.0.2/share/qemu/edk2-aarch64-code.fd,read-only=true \
-chardev socket,path=/tmp/qga_netbsd.sock,server=on,wait=off,id=qga0 \
-device virtio-serial \
-device virtconsole,chardev=qga0,name=org.qemu.guest_agent.0
This patch rectifies the operator precedence while assigning the NUL
terminator.
Fixes: c3f32c13a3
Signed-off-by: Sunil Nimmagadda <sunil@nimmagadda.net>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/m15xppk9qg.fsf@nimmagadda.net
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
(cherry picked from commit 9cfe110d9f)
References: bsc#1232617
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Update to latest stable release (9.1.1).
Full list of backports here:
https://lore.kernel.org/qemu-devel/7f0561ec-3564-4860-bacf-a98071a5ce52@tls.msk.ru/
A selection of them is listed here too:
ui/dbus: fix filtering all update messages
ui/win32: fix potential use-after-free with dbus shared memory
ui/dbus: fix leak on message filtering
hw/audio/hda: fix memory leak on audio setup
hw/audio/hda: free timer on exit
hw/char/pl011: Use correct masks for IBRD and FBRD
hw/intc/arm_gicv3_cpuif: Add cast to match the documentation
hw/intc/arm_gicv3: Add cast to match the documentation
hw/intc/arm_gicv3: Add cast to match the documentation
meson: ensure -mcx16 is passed when detecting ATOMIC128
meson: define qemu_isa_flags
meson: fix machine option for x86_version
target/m68k: Always return a temporary from gen_lea_mode
tcg/ppc: Use TCG_REG_TMP2 for scratch index in prepare_host_addr
tcg/ppc: Use TCG_REG_TMP2 for scratch tcg_out_qemu_st
linux-user: Fix parse_elf_properties GNU0_MAGIC check
linux-user/flatload: Take mmap_lock in load_flt_binary()
vnc: fix crash when no console attached
testing: bump mips64el cross to bookworm and fix package list
hw/sd/sdcard: Fix handling of disabled boot partitions
target/arm: Avoid target_ulong for physical address lookups
block/reqlist: allow adding overlapping requests
util/timer: avoid deadlock when shutting down
hw/mips/jazz: fix typo in in-built NIC alias
target/ppc: Fix lxvx/stxvx facility check
tcg: Fix iteration step in 32-bit gvec operation
hw/loongarch/virt: Add description for virt machine type
migration/multifd: Fix p->iov leak in multifd-uadk.c
target/ppc: Fix migration of CPUs with TLB_EMB TLB type
target/hppa: Fix random 32-bit linux-user crashes
target/arm: Correct ID_AA64ISAR1_EL1 value for neoverse-v1
hw/char/stm32l4x5_usart.c: Enable USART ACK bit response
migration/multifd: Fix rb->receivedmap cleanup race
mac_dbdma: Remove leftover `dma_memory_unmap` calls
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
When running configure, first of all we disable everything, and then we
enable only the feature that we know we want (and, of course, system
and user emulation use different sets of such features).
Consolidate the first part in a macro, that can be share between the two
spec files, making everything simpler and prettier.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Convert conditional build of features to the %bcond_without, so they
can actually be disabled, e.g., at the project level.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Upstream provides services for qemu-pr-helper. So far, we've not needed
them, so let's continue not to ship them for now.
However, in case at some point we want to start offering them, stash the
commented out runes for that in the spec file.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Package qemu-vmsr-helper for letting VMs access the RAPL MSR.
I'll live in its own package and only makes sense on x86_64.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
The fstat call can take a long time to finish when running over
NFS. Add a version of it that runs in the thread pool.
Adapt one of its users, raw_co_get_allocated_file size to use the new
version. That function is called via QMP under the qemu_global_mutex
so it has a large chance of blocking VCPU threads in case it takes too
long to finish.
Link: https://lore.kernel.org/r/20240409145917.6780-1-farosas@suse.de
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: João Silva <jsilva@suse.de>
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Convert the remaining functions to make the QMP commands query-block
and query-named-block-nodes run in their entirety in a coroutine. With
this, any yield from those commands will return all the way back to
the main loop. This releases the BQL and the main loop and avoids
having the QMP command block another more important task from running.
Both commands need to be converted at once because hmp_info_block
calls both and it needs to be moved to a coroutine as well.
Now the wrapper for bdrv_co_get_allocated_file_size() can be made not
mixed and the wrapper for bdrv_co_block_device_info() can be removed.
Link: https://lore.kernel.org/r/20240409145917.6780-1-farosas@suse.de
Signed-off-by: Lin Ma <lma@suse.com>
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
We're currently doing a full query-block just to enumerate the devices
for qmp_nbd_server_add and then discarding the BlockInfoList
afterwards. Alter hmp_nbd_server_start to instead iterate explicitly
over the block_backends list.
This allows the removal of the dependency on qmp_query_block from
hmp_nbd_server_start. This is desirable because we're about to move
qmp_query_block into a coroutine and don't need to change the NBD code
at the same time.
Add the GRAPH_RDLOCK_GUARD_MAINLOOP macro because
bdrv_skip_implicit_filters() needs the graph lock.
Link: https://lore.kernel.org/r/20240409145917.6780-1-farosas@suse.de
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
We're converting callers of bdrv_co_get_allocated_file_size() to run
in coroutines because that function will be made asynchronous when
called (indirectly) from the QMP dispatcher.
This function is a candidate because it calls bdrv_query_image_info()
-> bdrv_co_do_query_node_info() -> bdrv_co_get_allocated_file_size().
It is safe to turn this is a coroutine because the code it calls is
made up of either simple accessors and string manipulation functions
[1] or it has already been determined to be safe [2].
1) bdrv_refresh_filename(), bdrv_is_read_only(),
blk_enable_write_cache(), bdrv_cow_bs(), blk_get_public(),
throttle_group_get_name(), bdrv_write_threshold_get(),
bdrv_query_dirty_bitmaps(), throttle_group_get_config(),
bdrv_filter_or_cow_bs(), bdrv_skip_implicit_filters()
2) bdrv_co_do_query_node_info() (see previous commits);
This was the only caller of bdrv_query_image_info(), so we can remove
the wrapper for that function now.
Link: https://lore.kernel.org/r/20240409145917.6780-1-farosas@suse.de
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
This function is a caller of bdrv_do_query_node_info(), which have
been converted to a coroutine. Convert this function as well so we're
closer from having the whole qmp_query_block as a single coroutine.
Also remove the wrapper for bdrv_co_do_query_node_info() now that all
its callers are converted.
Link: https://lore.kernel.org/r/20240409145917.6780-1-farosas@suse.de
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
We're converting callers of bdrv_co_get_allocated_file_size() to run
in coroutines because that function will be made asynchronous when
called (indirectly) from the QMP dispatcher.
This function is a candidate because it calls bdrv_do_query_node_info(),
which in turn calls bdrv_co_get_allocated_file_size().
All the functions called from bdrv_do_query_node_info() onwards are
coroutine-safe, either have a coroutine version themselves[1] or are
mostly simple code/string manipulation[2].
1) bdrv_co_getlength(), bdrv_co_get_allocated_file_size(),
bdrv_co_get_info();
2) bdrv_refresh_filename(), bdrv_get_format_name(),
bdrv_get_full_backing_filename(), bdrv_query_snapshot_info_list(),
bdrv_get_specific_info();
Link: https://lore.kernel.org/r/20240409145917.6780-1-farosas@suse.de
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Move this function into a coroutine so we can convert the whole
qmp_query_block command into a coroutine in the next patches.
Placing the entire command in a coroutine allow us to yield all the
way back to the main loop, releasing the BQL and unblocking the main
loop.
When the whole conversion is completed, we'll be able to avoid a
priority inversion that happens when a QMP command calls a slow
(buggy) system call and blocks the vcpu thread from doing mmio due to
contention on the BQL.
About coroutine safety:
Most callees have coroutine versions themselves and thus are safe to
call in a coroutine. The remaining ones:
- bdrv_refresh_filename, bdrv_get_full_backing_filename: String
manipulation, nothing that would be unsafe for use in coroutines;
- bdrv_get_format_name: Just accesses a field;
- bdrv_get_specific_info, bdrv_query_snapshot_info_list: No locks or
anything that would poll or block.
(using a mixed wrapper for now, but after all callers are converted,
this can become a coroutine exclusively)
Link: https://lore.kernel.org/r/20240409145917.6780-1-farosas@suse.de
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
There is a small window at the end of block device migration when
devices are being re-activated. This includes a resetting of some
fields of BDRVQcow2State at qcow2_co_invalidate_cache(). A concurrent
QMP query-block command can call qcow2_get_specific_info() during this
window and see the cleared values, which leads to an assert:
qcow2_get_specific_info: Assertion `false' failed
This is the same issue as Gitlab #1933, which has already been
resolved[1], but there the fix applied only to non-coroutine
commands. Once we move query-block to a coroutine the problem will
manifest again.
Add an operation blocker to the invalidation function to block the
query info path during this window.
Instead of failing query-block, which would be disruptive to users,
use the blocker to know when to reschedule the coroutine back into the
iohandler so it doesn't run while the BDRVQcow2State is inconsistent.
To avoid failing query-block when all block operations are blocked,
unblock the INFO operation at various places. This preserves the prior
situations where query-block used to work.
1 - https://gitlab.com/qemu-project/qemu/-/issues/1933
Link: https://lore.kernel.org/all/87bk6trl9i.fsf@suse.de/
Link: https://lore.kernel.org/r/20240409145917.6780-1-farosas@suse.de
References: bsc#1221812
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Some callers of this function are about to be converted to run in
coroutines, so allow it to be executed both inside and outside a
coroutine while we convert all the callers.
This will be reverted once all callers of bdrv_do_query_node_info run
in a coroutine.
Link: https://lore.kernel.org/r/20240409145917.6780-1-farosas@suse.de
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
The nios2 emulation target has been removed upstream by commit
6c3014858c (target/nios2: Remove the deprecated Nios II target,
2024-03-27).
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Upstream commit 7c08eefcaf (tests/data/acpi: Move x86 ACPI tables
under x86/${machine} path, 2024-06-25) has moved some files under
tests/data. Update the spec file to match.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
The avx512f, live-block-migration and pvrdma options no longer exist
in upstream configure because those features were removed. Make the
corresponding changes in the spec files.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Update to latest upstream major release, 9.1.0:
https://lore.kernel.org/qemu-devel/172549088090.3334224.10887376086844748499@amd.com/
Full changelog available here:
https://wiki.qemu.org/ChangeLog/9.1
Some of the most notable features/fixes:
* migration: compression offload support via Intel In-Memory Analytics
Accelerator (IAA) or User Space Accelerator Development Kit (UADK),
along with enhanced support for postcopy failure recovery
* virtio: support for VIRTIO_F_NOTIFICATION_DATA, allowing guest
drivers to provide additional data as part of sending device notifications
for performance/debug purposes
* guest-agent: support for guest-network-get-route command on linux,
guest-ssh-* commands on Windows, and enhanced CLI support for
configuring allowed/blocked commands
* block: security fixes for QEMU NBD server and NBD TLS encryption
* ARM: emulation support for FEAT_NMI, FEAT_CSV2_3, FEAT_ETS2,
FEAT_Spec_FPACC, FEAT_WFxT, FEAT_Debugv8p8 architecture features
* ARM: nested/two-stage page table support for emulated SMMUv3
* ARM: xilinx_zynq board support for cache controller and multiple
CPUs, and B-L475E-IOT01A board support for a DM163 display
* LoongArch: support for directly booting an ELF kernel and for running
up to 256 vCPUs via extioi virt extension
* LoongArch: enhanced debug/GDB support
* RISC-V: support for version 1.13 of privileged architecture specification
* RISC-V: support for Zve32x, Zve64x, Zimop, Zcmop, Zama16b, Zabha,
Zawrs, and Smcntrpmf extensions
* RISC-V: enhanced debug/GDB support and general fixes
* SPARC: emulation support for FMAF, IMA, VIS3, and VIS4 architecture
features
* x86: KVM support for running AMD SEV-SNP guests
* x86: CPU emulation support for Icelake-Server-v7, SapphireRapids-v3,
and SierraForest
The following bugs/CVEs were solved (in 9.0.x) with backports that are
now included in 9.1 upstream:
- CVE-2024-4467 (bsc#1227322)
- CVE-2024-7409 (bsc#1229007)
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Remove spurious initialization with PC_MACHINE_CLASS().
Signed-off-by: Fabiano Rosas <farosas@suse.de>
[DF: added some context in the changelog]
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
This should allow qemu to be built with GCC14. [1] I believe that the
package actually intends to use -Wno-error already (which makes sense
for package building) because it puts it to EXTRA_CFLAGS, but at least
the ipxe slap -Werror after EXTRA_CFLAGS, unless NO_WERROR is defined
to one.
[1] https://github.com/ipxe/ipxe/issues/1219
References: bsc#1227960
Signed-off-by: Martin Jambor <mjambor@suse.com>
[set NO_WERROR=1 only for ipxe]
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Update to latest stable release (9.0.2).
Full list of backports here:
https://lore.kernel.org/qemu-devel/1721203819.679622.831479.nullmailer@tls.msk.ru/
A selection of them is listed here too:
hw/nvme: fix number of PIDs for FDP RUH update
sphinx/qapidoc: Fix to generate doc for explicit, unboxed arguments
char-stdio: Restore blocking mode of stdout on exit
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
virtio-pci: Fix the failure process in kvm_virtio_pci_vector_use_one()
tcg/optimize: Fix TCG_COND_TST* simplification of setcond2
block: Parse filenames only when explicitly requested
iotests/270: Don't store data-file with json: prefix in image
iotests/244: Don't store data-file with protocol in image
qcow2: Don't open data_file with BDRV_O_NO_IO
tests: add testing of parameter=3D1 for SMP topology (bsc#1228169)
hw/core: allow parameter=3D1 for SMP topology on any machine
target/arm: Fix FJCVTZS vs flush-to-zero
target/arm: Fix VCMLA Dd, Dn, Dm[idx]
i386/cpu: fixup number of addressable IDs for processor cores in the physical package
tests: Update our CI to use CentOS Stream 9 instead of 8
migration: Fix file migration with fdset
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
target/sparc: use signed denominator in sdiv helper
linux-user: Make TARGET_NR_setgroups affect only the current thread
accel/tcg: Fix typo causing tb->page_addr[1] to not be recorded
stdvga: fix screen blanking
hw/audio/virtio-snd: Always use little endian audio format
Revert "monitor: use aio_co_reschedule_self()"
ui/gtk: Draw guest frame at refresh cycle
virtio-net: drop too short packets early
target/i386: fix size of EBP writeback in gen_enter()
References: bsc#1228169
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Update to latest stable release (9.0.1).
Full list of backports here:
https://lore.kernel.org/qemu-devel/1718081053.366429.1238758.nullmailer@tls.msk.ru/
A selection of them is reported here too:
Update version for 9.0.1 release
target/loongarch: fix a wrong print in cpu dump
ui/sdl2: Allow host to power down screen
virtio-gpu: fix v2 migration
target/i386: fix SSE and SSE2 feature check
target/i386: fix xsave.flat from kvm-unit-tests
disas/riscv: Decode all of the pmpcfg and pmpaddr CSRs
riscv, gdbstub.c: fix reg_width in ricsv_gen_dynamic_vector_feature()
target/riscv/kvm.c: Fix the hart bit setting of AIA
target/riscv: rvzicbo: Fixup CBO extension register calculation
target/riscv: do not set mtval2 for non guest-page faults
target/riscv: prioritize pmp errors in raise_mmu_exception()
target/riscv: rvv: Remove redudant SEW checking for vector fp narrow/widen instructions
target/riscv: rvv: Check single width operator for vfncvt.rod.f.f.w
target/riscv: rvv: Check single width operator for vector fp widen instructions
target/riscv: rvv: Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
target/riscv/cpu.c: fix Zvkb extension config
target/riscv: Fix the element agnostic function problem
target/riscv/kvm: tolerate KVM disable ext errors
target/riscv/kvm: Fix exposure of Zkr
hw/intc/riscv_aplic: APLICs should add child earlier than realize
iotests: test NBD+TLS+iothread
qio: Inherit follow_coroutine_ctx across TLS
target/arm: Disable SVE extensions when SVE is disabled
hw/intc/arm_gic: Fix handling of NS view of GICC_APR<n>
hvf: arm: Fix encodings for ID_AA64PFR1_EL1 and debug System registers
gitlab: use 'setarch -R' to workaround tsan bug
gitlab: use $MAKE instead of 'make'
dockerfiles: add 'MAKE' env variable to remaining containers
gitlab: Update msys2-64bit runner tags
target/i386: no single-step exception after MOV or POP SS
target/i386: disable jmp_opt if EFLAGS.RF is 1
hw/loongarch/virt: Fix FDT memory node address width
hw/loongarch: Fix fdt memory node wrong 'reg'
target/loongarch/kvm: fpu save the vreg registers high 192bit
hw/core/machine: move compatibility flags for VirtIO-net USO to machine 8.1
target-i386: hyper-v: Correct kvm_hv_handle_exit return value
hw/pflash: fix block write start
tcg/loongarch64: Fill out tcg_out_{ld,st} for vector regs
ui/gtk: Check if fence_fd is equal to or greater than 0
ui/gtk: Fix mouse/motion event scaling issue with GTK display backend
configure: Fix error message when C compiler is not working
configure: quote -D options that are passed through to meson
target/i386: fix feature dependency for WAITPKG
target/i386: rdpkru/wrpkru are no-prefix instructions
target/i386: fix operand size for DATA16 REX.W POPCNT
hw/remote/vfio-user: Fix config space access byte order
hw/loongarch/virt: Fix memory leak
target/sh4: Update DisasContextBase.insn_start
target/sparc: Fix FPMERGE
target/sparc: Fix FMULD8*X16
target/sparc: Fix FMUL8x16A{U,L}
target/sparc: Fix FMUL8x16
target/sparc: Fix FEXPAND
target/i386: Give IRQs a chance when resetting HF_INHIBIT_IRQ_MASK
plugins: Update stale comment
target/sh4: Fix SUBV opcode
target/sh4: Fix ADDV opcode
hw/arm/npcm7xx: Store derivative OTP fuse key in little endian
hw/dmax/xlnx_dpdma: fix handling of address_extension descriptor fields
hw/ufs: Fix buffer overflow bug
.gitlab-ci.d/cirrus.yml: Shorten the runtime of the macOS and FreeBSD jobs
tests/avocado: update sunxi kernel from armbian to 6.6.16
target/arm: Restrict translation disabled alignment check to VMSA
target/riscv/kvm: remove sneaky strerrorname_np() instance
target/loongarch/cpu.c: typo fix: expection
backends/cryptodev-builtin: Fix local_error leaks
nbd/server: Mark negotiation functions as coroutine_fn
nbd/server: do not poll within a coroutine context
docs: i386: pc: Update maximum CPU numbers for PC Q35
linux-user: do_setsockopt: fix SOL_ALG.ALG_SET_KEY
migration/colo: Fix bdrv_graph_rdlock_main_loop: Assertion `!qemu_in_coroutine()' failed.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Change the order of audio driver list in SLE to prefer pulseaudio
over pipewire (related to bsc#1222218).
Signed-off-by: Antonio Larrosa <alarrosa@suse.com>
References: bsc#1222218
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
In commit "[openSUSE][RPM] Normalize hostname, for reproducible builds"
(dec5f6c8a7acd23222a14c6600d6967219fda65c) the USER and HOSTNAME
variables were defined in the different RPM section. Fix that.
Fixes: dec5f6c8a7acd23222a14c6600d6967219fda65c
References: boo#1084909
Suggested-by: Bernhard M. Wiedemann <githubbmwprimary@lsmod.de>
Signed-offf-by: Dario Faggioli <dfaggioli@suse.com>
Update to latest upstream release 9.0.0.
Full changelog at:
https://wiki.qemu.org/ChangeLog/9.0
Highlights include:
* block: virtio-blk now supports multiqueue where different queues of a
single disk can be processed by different I/O threads
* gdbstub: various improvements such as catching syscalls in user-mode,
support for fork-follow modes, and support for siginfo:read
* memory: preallocation of memory backends can now be handled
concurrently using multiple threads in some cases
* migration: support for "mapped-ram" capability allowing for more
efficient VM snapshots, improved support for zero-page detection, and
checkpoint-restart support for VFIO
* ARM: architectural feature support for ECV (Enhanced Counter Virtualization),
NV (Nested Virtualization), and NV2 (Enhanced Nested
Virtualization)
* ARM: board support for B-L475E-IOT01A IoT node, mp3-an536 (MPS3 dev board
+ AN536 firmware), and raspi4b (Raspberry Pi 4 Model B)
* ARM: additional IO/disk/USB/SPI/ethernet controller and timer support for
Freescale i.MX6, Allwinner R40, Banana Pi, npcm7xxx, and virt boards
* HPPA: numerous bug fixes and SeaBIOS-hppa firmware updated to version 16
* LoongArch: KVM acceleration support, including LSX/LASX vector
extensions
* RISC-V: ISA/extension support for Zacas, amocas, RVA22 profiles,
Zaamo, Zalrsc, Ztso, and more
* RISC-V: SMBIOS support for RISC-V virt machine, ACPI support for
SRAT, SLIT, AIA, PLIC and updated RHCT table support, and numerous fixes
* s390x: Emulation support for CVDG, CVB, CVBY and CVBG instructions,
and fixes for LAE (Load Address Extended) emulation
* and lots more...
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Update to latest stable release (8.2.3).
Full changelog/backports here:
https://lore.kernel.org/qemu-devel/1713980341.971368.1218343.nullmailer@tls.msk.ru/
Some of the upstream backports are:
Update version for 8.2.3 release
ppc/spapr: Initialize max_cpus limit to SPAPR_IRQ_NR_IPIS.
ppc/spapr: Introduce SPAPR_IRQ_NR_IPIS to refer IRQ range for CPU IPIs.
hw/pci-host/ppc440_pcix: Do not expose a bridge device on PCI bus
hw/isa/vt82c686: Keep track of PIRQ/PINT pins separately
virtio-pci: fix use of a released vector
linux-user/x86_64: Handle the vsyscall page in open_self_maps_{2,4}
hw/audio/virtio-snd: Remove unused assignment
hw/net/net_tx_pkt: Fix overrun in update_sctp_checksum()
hw/sd/sdhci: Do not update TRNMOD when Command Inhibit (DAT) is set
hw/net/lan9118: Fix overflow in MIL TX FIFO
hw/net/lan9118: Replace magic '2048' value by MIL_TXFIFO_SIZE definition
backends/cryptodev: Do not abort for invalid session ID
hw/misc/applesmc: Fix memory leak in reset() handler
hw/block/nand: Fix out-of-bound access in NAND block buffer
hw/block/nand: Have blk_load() take unsigned offset and return boolean
hw/block/nand: Factor nand_load_iolen() method out
qemu-options: Fix CXL Fixed Memory Window interleave-granularity typo
hw/virtio/virtio-crypto: Protect from DMA re-entrancy bugs
hw/char/virtio-serial-bus: Protect from DMA re-entrancy bugs
hw/display/virtio-gpu: Protect from DMA re-entrancy bugs
mirror: Don't call job_pause_point() under graph lock (bsc#1224179)
...and many more...
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Update to latest stable release (8.2.2).
Full changelog here:
https://lore.kernel.org/qemu-devel/1709577077.783602.1474596.nullmailer@tls.msk.ru/
Upstream backports:
chardev/char-socket: Fix TLS io channels sending too much data to the backend
tests/unit/test-util-sockets: Remove temporary file after test
hw/usb/bus.c: PCAP adding 0xA in Windows version
hw/intc/Kconfig: Fix GIC settings when using "--without-default-devices"
gitlab: force allow use of pip in Cirrus jobs
tests/vm: avoid re-building the VM images all the time
tests/vm: update openbsd image to 7.4
target/i386: leave the A20 bit set in the final NPT walk
target/i386: remove unnecessary/wrong application of the A20 mask
target/i386: Fix physical address truncation
target/i386: check validity of VMCB addresses
target/i386: mask high bits of CR3 in 32-bit mode
pl031: Update last RTCLR value on write in case it's read back
hw/nvme: fix invalid endian conversion
update edk2 binaries to edk2-stable202402
update edk2 submodule to edk2-stable202402
target/ppc: Fix crash on machine check caused by ifetch
target/ppc: Fix lxv/stxv MSR facility check
.gitlab-ci.d/windows.yml: Drop msys2-32bit job
system/vl: Update description for input grab key
docs/system: Update description for input grab key
hw/hppa/Kconfig: Fix building with "configure --without-default-devices"
tests/qtest: Depend on dbus_display1_dep
meson: Explicitly specify dbus-display1.h dependency
audio: Depend on dbus_display1_dep
ui/console: Fix console resize with placeholder surface
ui/clipboard: add asserts for update and request
ui/clipboard: mark type as not available when there is no data
ui: reject extended clipboard message if not activated
target/i386: Generate an illegal opcode exception on cmp instructions with lock prefix
i386/cpuid: Move leaf 7 to correct group
i386/cpuid: Decrease cpuid_i when skipping CPUID leaf 1F
i386/cpu: Mask with XCR0/XSS mask for FEAT_XSAVE_XCR0_HI and FEAT_XSAVE_XSS_HI leafs
i386/cpu: Clear FEAT_XSAVE_XSS_LO/HI leafs when CPUID_EXT_XSAVE is not available
.gitlab-ci/windows.yml: Don't install libusb or spice packages on 32-bit
iotests: Make 144 deterministic again
target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU
target/arm: Fix SVE/SME gross MTE suppression checks
target/arm: Handle mte in do_ldrq, do_ldro
target/arm: Split out make_svemte_desc
target/arm: Adjust and validate mtedesc sizem1
target/arm: Fix nregs computation in do_{ld,st}_zpa
linux-user/aarch64: Choose SYNC as the preferred MTE mode
tests/acpi: Update DSDT.cxl to reflect change _STA return value.
hw/i386: Fix _STA return value for ACPI0017
tests/acpi: Allow update of DSDT.cxl
smmu: Clear SMMUPciBus pointer cache when system reset
virtio_iommu: Clear IOMMUPciBus pointer cache when system reset
virtio-gpu: Correct virgl_renderer_resource_get_info() error check
hw/cxl: Pass CXLComponentState to cache_mem_ops
hw/cxl/device: read from register values in mdev_reg_read()
cxl/cdat: Fix header sum value in CDAT checksum
cxl/cdat: Handle cdat table build errors
vhost-user.rst: Fix vring address description
tcg/arm: Fix goto_tb for large translation blocks
tcg: Increase width of temp_subindex
hw/net/tulip: add chip status register values
hw/smbios: Fix port connector option validation
hw/smbios: Fix OEM strings table option validation
configure: run plugin TCG tests again
tests/docker: Add sqlite3 module to openSUSE Leap container
hw/riscv/virt-acpi-build.c: fix leak in build_rhct()
migration: Fix logic of channels and transport compatibility check
virtio-blk: avoid using ioeventfd state in irqfd conditional
virtio: Re-enable notifications after drain
virtio-scsi: Attach event vq notifier with no_poll
iotests: give tempdir an identifying name
iotests: fix leak of tmpdir in dry-run mode
hw/scsi/lsi53c895a: add missing decrement of reentrancy counter
linux-user/aarch64: Add padding before __kernel_rt_sigreturn
tcg/loongarch64: Set vector registers call clobbered
pci-host: designware: Limit value range of iATU viewport register
target/arm: Reinstate "vfp" property on AArch32 CPUs
qemu-options.hx: Improve -serial option documentation
system/vl.c: Fix handling of '-serial none -serial something'
target/arm: fix exception syndrome for AArch32 bkpt insn
block/blkio: Make s->mem_region_alignment be 64 bits
qemu-docs: Update options for graphical frontends
Make 'uri' optional for migrate QAPI
vfio/pci: Clear MSI-X IRQ index always
migration: Fix use-after-free of migration state object
migration: Plug memory leak on HMP migrate error path
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
We wanted QEMU to support larger VMs (in therm of RAM size) by default
and we therefore introduced patch "[openSUSE] increase x86_64 physical
bits to 42". This, however, means that we create VMs with 42 bits of
physical address space even on hosts that only has, say, 40. And that
can't work.
In fact, it has been a problem since a long time (e.g., bsc#1205978) and
it's also the actual root cause of bsc#1219977.
Get rid of that old patch, in favor of a new one that still raise the
default number of address bits to 42, but only on hosts that supports
that.
This means that we can also use the proper SeaBIOS version, without
reverting commits that were only a problem due to our broken downstream
patch.
We probably aslo don't need to ship some of the custom ACPI tables (for
passing tests), but we'll actually remove them later, after double
checking properly that all the tests do work.
References: bsc#1205978
References: bsc#1219977
References: bsc#1220799
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Update the copyright year to 2024, sort dependencies etc.
This way, 'osc' does not have to do these changes all the times (they're
automatic, so no big deal, but it's annoying to see them in the diffs of
all the requests).
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Backported commits:
* Update version for 8.2.1 release
* target/arm: Fix incorrect aa64_tidcp1 feature check
* target/arm: Fix A64 scalar SQSHRN and SQRSHRN
* target/xtensa: fix OOB TLB entry access
* qtest: bump aspeed_smc-test timeout to 6 minutes
* monitor: only run coroutine commands in qemu_aio_context
* iotests: port 141 to Python for reliable QMP testing
* iotests: add filter_qmp_generated_node_ids()
* block/blklogwrites: Fix a bug when logging "write zeroes" operations.
* virtio-net: correctly copy vnet header when flushing TX (bsc#1218484, CVE-2023-6693)
* tcg/arm: Fix SIGILL in tcg_out_qemu_st_direct
* linux-user/riscv: Adjust vdso signal frame cfa offsets
* linux-user: Fixed cpu restore with pc 0 on SIGBUS
* block/io: clear BDRV_BLOCK_RECURSE flag after recursing in bdrv_co_block_status
* coroutine-ucontext: Save fake stack for pooled coroutine
* tcg/s390x: Fix encoding of VRIc, VRSa, VRSc insns
* accel/tcg: Revert mapping of PCREL translation block to multiple virtual addresses
* acpi/tests/avocado/bits: wait for 200 seconds for SHUTDOWN event from bits VM
* s390x/pci: drive ISM reset from subsystem reset
* s390x/pci: refresh fh before disabling aif
* s390x/pci: avoid double enable/disable of aif
* hw/scsi/esp-pci: set DMA_STAT_BCMBLT when BLAST command issued
* hw/scsi/esp-pci: synchronise setting of DMA_STAT_DONE with ESP completion interrupt
* hw/scsi/esp-pci: generate PCI interrupt from separate ESP and PCI sources
* hw/scsi/esp-pci: use correct address register for PCI DMA transfers
* migration/rdma: define htonll/ntohll only if not predefined
* hw/pflash: implement update buffer for block writes
* hw/pflash: use ldn_{be,le}_p and stn_{be,le}_p
* hw/pflash: refactor pflash_data_write()
* backends/cryptodev: Do not ignore throttle/backends Errors
* target/i386: pcrel: store low bits of physical address in data[0]
* target/i386: fix incorrect EIP in PC-relative translation blocks
* target/i386: Do not re-compute new pc with CF_PCREL
* load_elf: fix iterator's type for elf file processing
* target/hppa: Update SeaBIOS-hppa to version 15
* target/hppa: Fix IOR and ISR on error in probe
* target/hppa: Fix IOR and ISR on unaligned access trap
* target/hppa: Export function hppa_set_ior_and_isr()
* target/hppa: Avoid accessing %gr0 when raising exception
* hw/hppa: Move software power button address back into PDC
* target/hppa: Fix PDC address translation on PA2.0 with PSW.W=0
* hw/pci-host/astro: Add missing astro & elroy registers for NetBSD
* hw/hppa/machine: Disable default devices with --nodefaults option
* hw/hppa/machine: Allow up to 3840 MB total memory
* readthodocs: fully specify a build environment
* .gitlab-ci.d/buildtest.yml: Work around htags bug when environment is large
* target/s390x: Fix LAE setting a wrong access register
* tests/qtest/virtio-ccw: Fix device presence checking
* tests/acpi: disallow tests/data/acpi/virt/SSDT.memhp changes
* tests/acpi: update expected data files
* edk2: update binaries to git snapshot
* edk2: update build config, set PcdUninstallMemAttrProtocol = TRUE.
* edk2: update to git snapshot
* tests/acpi: allow tests/data/acpi/virt/SSDT.memhp changes
* util: fix build with musl libc on ppc64le
* tcg/ppc: Use new registers for LQ destination
* hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers
* hw/vfio: fix iteration over global VFIODevice list
* vfio/container: Replace basename with g_path_get_basename
* edu: fix DMA range upper bound check
* hw/net: cadence_gem: Fix MDIO_OP_xxx values
* audio/audio.c: remove trailing newline in error_setg
* chardev/char.c: fix "abstract device type" error message
* target/riscv: Fix mcycle/minstret increment behavior
* hw/net/can/sja1000: fix bug for single acceptance filter and standard frame
* target/i386: the sgx_epc_get_section stub is reachable
* configure: use a native non-cross compiler for linux-user
* include/ui/rect.h: fix qemu_rect_init() mis-assignment
* target/riscv/kvm: do not use non-portable strerrorname_np()
* iotests: Basic tests for internal snapshots
* vl: Improve error message for conflicting -incoming and -loadvm
* block: Fix crash when loading snapshot on inactive node
References: bsc#1218484 (CVE-2023-6693)
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Depending on the VM configuration (both at the VM definition level and
on the guest itself) a VGA console might be necessary, or weird lockup
will occur. Since the VGA module package is smalle enough, add a
dependency for it, from other display modules, to act as a workaround.
While there, make more explicit and precise the dependencies between all
the various modules, by specifying that they should all have the same
version and release.
References: bsc#1219164
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Historically, KVM was available only for x86 and s390, and was invoked
via a binary called 'kvm' or 'qemu-kvm'. For a while, we've shipped a
package that was making it possible to invoke QEMU like that, but only
for these two arches. This, however, created a lot of confusion and
dependencies issues.
Fix them by creating a symlink from 'qemu-kvm' to the proper binary on
all arches and by making the main QEMU package Providing and Obsoleting
(also on all arches) the old qemu-kvm one.
Note that, for RISCV, the qemu-system-riscv64 binary, to which the symlink
should point, is in the qemu-extra package. However, if we are on RISCV,
qemu-extra is an hard dependency of qemu. Therefore, it's fine to ship
the link and also set the Provides: and Obsoletes: tag in the qemu
package itself. It'd be more correct to do that in the qemu-extra
package, of course, but this would complicate the spec file and it's not
worth it, considering this is all legacy and should very well go away
soon.
References: bsc#1218684
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
