Running "make distclean" in the build tree currently fails since this
tries to run the "distclean" target in the contrib/plugins/ folder, too,
but the Makefile there is missing this target. Thus add 'distclean' there
to fix this issue.
And to avoid regressions with "make distclean", add this command to one
of the build jobs, too.
Message-ID: <20240902154749.73876-1-thuth@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 1231bc7d12)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Found on debian stable.
../contrib/plugins/execlog.c: In function ‘vcpu_tb_trans’:
../contrib/plugins/execlog.c:236:22: error: declaration of ‘n’ shadows a previous local [-Werror=shadow=local]
236 | for (int n = 0; n < all_reg_names->len; n++) {
| ^
../contrib/plugins/execlog.c:184:12: note: shadowed declaration is here
184 | size_t n = qemu_plugin_tb_n_insns(tb);
|
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240814233645.944327-2-pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* target/i386/kvm: support for reading RAPL MSRs using a helper program
* hpet: emulation improvements
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaelL4UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMXoQf+K77lNlHLETSgeeP3dr7yZPOmXjjN
# qFY/18jiyLw7MK1rZC09fF+n9SoaTH8JDKupt0z9M1R10HKHLIO04f8zDE+dOxaE
# Rou3yKnlTgFPGSoPPFr1n1JJfxtYlLZRoUzaAcHUaa4W7JR/OHJX90n1Rb9MXeDk
# jV6P0v1FWtIDdM6ERm9qBGoQdYhj6Ra2T4/NZKJFXwIhKEkxgu4yO7WXv8l0dxQz
# jE4fKotqAvrkYW1EsiVZm30lw/19duhvGiYeQXoYhk8KKXXjAbJMblLITSNWsCio
# 3l6Uud/lOxekkJDAq5nH3H9hCBm0WwvwL+0vRf3Mkr+/xRGvrhtmUdp8NQ==
# =00mB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 03:19:58 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
hpet: avoid timer storms on periodic timers
hpet: store full 64-bit target value of the counter
hpet: accept 64-bit reads and writes
hpet: place read-only bits directly in "new_val"
hpet: remove unnecessary variable "index"
hpet: ignore high bits of comparator in 32-bit mode
hpet: fix and cleanup persistence of interrupt status
Add support for RAPL MSRs in KVM/Qemu
tools: build qemu-vmsr-helper
qio: add support for SO_PEERCRED for socket channel
target/i386: do not crash if microvm guest uses SGX CPUID leaves
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
virtio,pci,pc: features,fixes
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
# zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
# yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
# wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
# VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
# M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
# =k8e9
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 10:16:31 AM AEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (61 commits)
hw/nvme: Add SPDM over DOE support
backends: Initial support for SPDM socket support
hw/pci: Add all Data Object Types defined in PCIe r6.0
tests/acpi: Add expected ACPI AML files for RISC-V
tests/qtest/bios-tables-test.c: Enable basic testing for RISC-V
tests/acpi: Add empty ACPI data files for RISC-V
tests/qtest/bios-tables-test.c: Remove the fall back path
tests/acpi: update expected DSDT blob for aarch64 and microvm
acpi/gpex: Create PCI link devices outside PCI root bridge
tests/acpi: Allow DSDT acpi table changes for aarch64
hw/riscv/virt-acpi-build.c: Update the HID of RISC-V UART
hw/riscv/virt-acpi-build.c: Add namespace devices for PLIC and APLIC
virtio-iommu: Add trace point on virtio_iommu_detach_endpoint_from_domain
hw/vfio/common: Add vfio_listener_region_del_iommu trace event
virtio-iommu: Remove the end point on detach
virtio-iommu: Free [host_]resv_ranges on unset_iommu_devices
virtio-iommu: Remove probe_done
Revert "virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged"
gdbstub: Add helper function to unregister GDB register space
physmem: Add helper function to destroy CPU AddressSpace
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a privileged helper to access RAPL MSR.
The privileged helper tool, qemu-vmsr-helper, is designed to provide
virtual machines with the ability to read specific RAPL (Running Average
Power Limit) MSRs without requiring CAP_SYS_RAWIO privileges or relying
on external, out-of-tree patches.
The helper tool leverages Unix permissions and SO_PEERCRED socket
options to enforce access control, ensuring that only processes
explicitly requesting read access via readmsr() from a valid Thread ID
can access these MSRs.
The list of RAPL MSRs that are allowed to be read by the helper tool is
defined in rapl-msr-index.h. This list corresponds to the RAPL MSRs that
will be supported in the next commit titled "Add support for RAPL MSRs
in KVM/QEMU."
The tool is intentionally designed to run on the Linux x86 platform.
This initial implementation is tailored for Intel CPUs but can be
extended to support AMD CPUs in the future.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-3-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new plugin allows to stop emulation using conditions on the
emulation state. By setting this plugin arguments, it is possible
to set an instruction count limit and/or trigger address(es) to stop at.
The code returned at emulation exit can be customized.
This plugin demonstrates how someone could stop QEMU execution.
It could be used for research purposes to launch some code and
deterministically stop it and understand where its execution flow went.
Co-authored-by: Alexandre Iooss <erdnaxe@crans.org>
Signed-off-by: Simon Hamelin <simon.hamelin@grenoble-inp.org>
Signed-off-by: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240715081521.19122-2-simon.hamelin@grenoble-inp.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-5-alex.bennee@linaro.org>
Coverity reported:
>>> CID 1549454: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
>>> Potentially overflowing expression
"le32_to_cpu(desc->num_sectors) << 9" with type "uint32_t"
(32 bits, unsigned) is evaluated using 32-bit arithmetic, and
then used in a context that expects an expression of type
"uint64_t" (64 bits, unsigned).
199 le32_to_cpu(desc->num_sectors) << 9 };
Coverity noticed this issue after commit ab04420c3 ("contrib/vhost-user-*:
use QEMU bswap helper functions"), but it was pre-existing and introduced
from the beginning by commit caa1ee4313 ("vhost-user-blk: add
discard/write zeroes features support").
Explicitly cast the 32-bit value before the shift to fix this issue.
Fixes: Coverity CID 1549454
Fixes: 5ab04420c3 ("contrib/vhost-user-*: use QEMU bswap helper functions")
Fixes: caa1ee4313 ("vhost-user-blk: add discard/write zeroes features support")
Cc: changpeng.liu@intel.com
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240712153857.207440-1-sgarzare@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We were repeating information which wasn't super clear. As we already
will have dumped the last failing PC just note the divergence and dump
the previous instruction log.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-27-alex.bennee@linaro.org>
On macOS passing `-s /tmp/vhost.socket` parameter to the vhost-user-blk
application, the bind was done on `/tmp/vhost.socke` pathname,
missing the last character.
This sounds like one of the portability problems described in the
unix(7) manpage:
Pathname sockets
When binding a socket to a pathname, a few rules should
be observed for maximum portability and ease of coding:
• The pathname in sun_path should be null-terminated.
• The length of the pathname, including the terminating
null byte, should not exceed the size of sun_path.
• The addrlen argument that describes the enclosing
sockaddr_un structure should have a value of at least:
offsetof(struct sockaddr_un, sun_path) +
strlen(addr.sun_path)+1
or, more simply, addrlen can be specified as
sizeof(struct sockaddr_un).
So let's follow the last advice and simplify the code as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240618100440.145664-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This plugin uses the new time control interface to make decisions
about the state of time during the emulation. The algorithm is
currently very simple. The user specifies an ips rate which applies
per core. If the core runs ahead of its allocated execution time the
plugin sleeps for a bit to let real time catch up. Either way time is
updated for the emulation as a function of total executed instructions
with some adjustments for cores that idle.
Examples
--------
Slow down execution of /bin/true:
$ num_insn=$(./build/qemu-x86_64 -plugin ./build/tests/plugin/libinsn.so -d plugin /bin/true |& grep total | sed -e 's/.*: //')
$ time ./build/qemu-x86_64 -plugin ./build/contrib/plugins/libips.so,ips=$(($num_insn/4)) /bin/true
real 4.000s
Boot a Linux kernel simulating a 250MHz cpu:
$ /build/qemu-system-x86_64 -kernel /boot/vmlinuz-6.1.0-21-amd64 -append "console=ttyS0" -plugin ./build/contrib/plugins/libips.so,ips=$((250*1000*1000)) -smp 1 -m 512
check time until kernel panic on serial0
Tested in system mode by booting a full debian system, and using:
$ sysbench cpu run
Performance decrease linearly with the given number of ips.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240530220610.1245424-7-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-11-alex.bennee@linaro.org>
Instead of returning a host pointer, copy the data into
storage provided by the caller.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
1. The g_pattern_match_string() is deprecated when glib2 version >= 2.70.
Use g_pattern_spec_match_string() instead to avoid this problem.
2. The type of second parameter in g_ptr_array_add() is
'gpointer' {aka 'void *'}, but the type of reg->name is 'const char*'.
Cast the type of reg->name to 'gpointer' to avoid this problem.
compiler warning message:
contrib/plugins/execlog.c:330:17: warning: ‘g_pattern_match_string’
is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations]
330 | if (g_pattern_match_string(pat, rd->name) ||
| ^~
In file included from /usr/include/glib-2.0/glib.h:67,
from contrib/plugins/execlog.c:9:
/usr/include/glib-2.0/glib/gpattern.h:57:15: note: declared here
57 | gboolean g_pattern_match_string (GPatternSpec *pspec,
| ^~~~~~~~~~~~~~~~~~~~~~
contrib/plugins/execlog.c:331:21: warning: ‘g_pattern_match_string’
is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations]
331 | g_pattern_match_string(pat, rd_lower)) {
| ^~~~~~~~~~~~~~~~~~~~~~
/usr/include/glib-2.0/glib/gpattern.h:57:15: note: declared here
57 | gboolean g_pattern_match_string (GPatternSpec *pspec,
| ^~~~~~~~~~~~~~~~~~~~~~
contrib/plugins/execlog.c:339:63: warning: passing argument 2 of
‘g_ptr_array_add’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
339 | g_ptr_array_add(all_reg_names, reg->name);
| ~~~^~~~~~
In file included from /usr/include/glib-2.0/glib.h:33:
/usr/include/glib-2.0/glib/garray.h:198:62: note: expected
‘gpointer’ {aka ‘void *’} but argument is of type ‘const char *’
198 | gpointer data);
| ~~~~~~~~~~~~~~~~~~^~~~
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2210
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Message-ID: <20240326015257.21516-1-yaoxt.fnst@fujitsu.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
rec->count.score is inside rec, which is freed before rec->count.score is.
Reorder the instructions
Reported by Coverity as CID 1539967.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the new plugin register API we can now track changes to register
values. Currently the implementation is fairly dumb which will slow
down if a large number of register values are being tracked. This
could be improved by only instrumenting instructions which mention
registers we are interested in tracking.
Example usage:
./qemu-aarch64 -D plugin.log -d plugin \
-cpu max,sve256=on \
-plugin contrib/plugins/libexeclog.so,reg=sp,reg=z\* \
./tests/tcg/aarch64-linux-user/sha512-sve
will display in the execlog any changes to the stack pointer (sp) and
the SVE Z registers.
As testing registers every instruction will be quite a heavy operation
there is an additional flag which attempts to optimise the register
tracking by only instrumenting instructions which are likely to change
its value. This relies on the QEMU disassembler showing up the register
names in disassembly so is an explicit opt-in.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Based-On: <20231025093128.33116-19-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-27-alex.bennee@linaro.org>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
