Introduce basic pwritev/preadv support in the generic channel layer.
Specific implementation will follow for the file channel as this is
required in order to support migration streams with fixed location of
each ram page.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add a generic QIOChannel feature SEEKABLE which would be used by the
qemu_file* apis. For the time being this will be only implemented for
file channels.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need to do this in two pieces. One single function makes it
easier to grasp, specially since it removes one indirection in the
return value.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
It makes a bit more send to have the zero page handling of xbzrle
right where we save the zero page.
This also makes save_zero_page() follow the same format as
save_compress_page() at the top level of ram_save_target_page_legacy().
Signed-off-by: Fabiano Rosas <farosas@suse.de>
'rs' is not used in that function. Commit 9360447d34 ("ram: Use
MigrationStats for statistics") forgot to remove it.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Adapt the file migration tests to take into account the auto-pause
feature.
The test currently has a flag 'stop_src' that is used to know if the
test itself should stop the VM. Add a new flag 'auto_pause' to enable
QEMU to stop the VM instead.. The two in combination allow us to
migrate a already stopped VM and check that it is still stopped on the
destination (auto-pause in effect restoring the original state).
By adding a more precise tracking of migration state changes, we can
also make sure that auto-pause is actually stopping the VM right after
qmp_migrate(), as opposed to the vm_stop() that happens at
migration_complete().
When resuming the destination a similar situation occurs, we use
'stop_src' to have a stopped VM and check that the destination does
not get a "resume" event.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The file migration is asynchronous, so it benefits from being done
with a stopped VM. Allow the file migration to take benefit of the
auto-pause capability.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add a capability that allows the management layer to delegate to QEMU
the decision of whether to pause a VM and perform a non-live
migration. Depending on the type of migration being performed, this
could bring performance benefits.
Note that the capability is enabled by default but at this moment no
migration scheme is making use of it.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
There are some situations during migration when we want to change the
runstate of the VM, but don't actually want the new runstate to be put
on the wire to be restored on the destination VM. In those cases, the
pattern is to use global_state_store() to save the state for migration
before changing it.
One scenario where this happens is when switching the source VM into
the FINISH_MIGRATE state. This state only makes sense on the source
VM. Another situation is when pausing the source VM prior to migration
completion.
We are about to introduce a third scenario when the whole migration
should be performed with a paused VM. In this case we will want to
save the VM runstate at the very start of the migration and that state
will be the one restored on the destination regardless of all the
runstate changes that happen in between.
To achieve that we need to make sure that the other two calls to
global_state_store() do not overwrite the state that is to be
migrated.
Introduce a version of global_state_store() that only saves the state
if no other state has already been saved.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
There is a pattern of calling runstate_get() to store the current
runstate and calling global_state_store() to save the current runstate
for migration. Since global_state_store() also calls runstate_get(),
make it return the runstate instead.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add support for waiting for a migration state change event to
happen. This can help disambiguate between runstate changes that
happen during VM lifecycle.
Specifically, the next couple of patches want to know whether STOP
events happened at the migration start or end. Add the "setup" and
"active" migration states for that purpose.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move the QTestMigrationState into QTestState so we don't have to pass
it around to the wait_for_* helpers anymore. Since QTestState is
private to libqtest.c, move the migration state struct to libqtest.h
and add a getter.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Define a state object to capture events seen by migration tests, to allow
more events to be captured in a subsequent patch, and simplify event
checking in wait_for_migration_pass. No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
There is currently no way to write a test for errors that happened in
qmp_migrate before the migration has started.
Add a version of qmp_migrate that ensures an error happens. To make
use of it a test needs to set MigrateCommon.result as
MIG_TEST_QMP_ERROR.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We are sending a migration event of MIGRATION_STATUS_SETUP at
qemu_start_incoming_migration but never actually setting the state.
This creates a window between qmp_migrate_incoming and
process_incoming_migration_co where the migration status is still
MIGRATION_STATUS_NONE. Calling query-migrate during this time will
return an empty response even though the incoming migration command
has already been issued.
Commit 7cf1fe6d68 ("migration: Add migration events on target side")
has added support to the 'events' capability to the incoming part of
migration, but chose to send the SETUP event without setting the
state. I'm assuming this was a mistake.
This introduces a change in behavior, any QMP client waiting for the
SETUP event will hang, unless it has previously enabled the 'events'
capability. Having the capability enabled is sufficient to continue to
receive the event.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Use the new migrate_incoming_qmp helper in the places that currently
open-code calling migrate-incoming.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
file-based migration requires the target to initiate its migration after
the source has finished writing out the data in the file. Currently
there's no easy way to initiate 'migrate-incoming', allow this by
introducing migrate_incoming_qmp helper, similarly to migrate_qmp.
Also make sure migration events are enabled and wait for the incoming
migration to start before returning. This avoid a race when querying
the migration status too soon after issuing the command.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The following patch will make use of this function from within
migrate-helpers.c, so move it there.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Allow an offset option to be specified as part of the file URI, in
the form "file:filename,offset=offset", where offset accepts the common
size suffixes, or the 0x prefix, but not both. Migration data is written
to and read from the file starting at offset. If unspecified, it defaults
to 0.
This is needed by libvirt to store its own data at the head of the file.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Extend the migration URI to support file:<filename>. This can be used for
any migration scenario that does not require a reverse path. It can be
used as an alternative to 'exec:cat > file' in minimized containers that
do not contain /bin/sh, and it is easier to use than the fd:<fdname> URI.
It can be used in HMP commands, and as a qemu command-line parameter.
For best performance, guest ram should be shared and x-ignore-shared
should be true, so guest pages are not written to the file, in which case
the guest may remain running. If ram is not so configured, then the user
is advised to stop the guest first. Otherwise, a busy guest may re-dirty
the same page, causing it to be appended to the file multiple times,
and the file may grow unboundedly. That issue is being addressed in the
"fixed-ram" patch series.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
We've found the source of flakiness in this test, so re-enable it.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Sixth RISC-V PR for 8.1
This is a last minute PR for RISC-V.
The main goal is to fix
https://gitlab.com/qemu-project/qemu/-/issues/1823
which is a regression that means the aclint option
cannot be enabled.
While we are here we also fixup KVM issue.
* KVM: fix mvendorid size
* Fixup aclint check
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmTWfK0ACgkQr3yVEwxT
# gBNDTw/9EnIjXKBCwSejcL3xYpwTDbUbwou3dkkSjnEkhmxvPPM3H0pWet+xYlPg
# Lgt9b9clHZAjqGoHFxEdU8fS0MY4Jq5jDAinsS2TK6czLPBe5EEhyVjoDH5iRhTX
# AymK1XgwQ2kAuw2lhcb74GDboajkC7hNhr2Km1hLtpYV7bCW/efAUSO7adG4KBlB
# SCu06s9VdFtINW0mVN249JvRVQ1408HCQ5gwA0lLVdXhfHluVidwOjc//ELtdnQn
# SeHdX1V+e+3fiYuqmr2UHaJXp9s0ZInOyLIDBPA97SOUdaO/oy+siZYRk25yV99h
# Ec7tpNnYJjzppmc++GlzTNpUWVEBM6j+QyD7ioEj4yAGkMEjUlgLcImyGng1TT4i
# uvABg91uzJyBoUga3GhZYt/sPW00Jft4VYH3QvGOOwjarIor8K0J7sox8eIOfEs4
# JqCIYX4kas+DwK4+i8WyjMeuihWFJ5ipKR7Gwhbe5uQ5szTXFYIT4TZH/78BWozI
# dMu5HOyu5+l9yCy39NP7FjNJ6VQKBYGvlkUr5rLRS0yQWGThaK8wIBMXcuZCW96p
# hSy/pratHQYaIRr0ZiqRcNyFNsTMua/C2DMPcjQR1ci8xdj010DoriyS0Vsh88xq
# pVgC6gYn59gDUdBx0gB/ZSMu4O+F/+Z5htnucoTxvwpKxUU48Lg=
# =x8Fl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 11 Aug 2023 11:23:41 AM PDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230811-3' of https://github.com/alistair23/qemu:
hw/riscv/virt.c: change 'aclint' TCG check
target/riscv/kvm.c: fix mvendorid size in vcpu_set_machine_ids()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 'aclint' property is being conditioned with tcg acceleration in
virt_machine_class_init(). But acceleration code starts later than the
class init of the board, meaning that tcg_enabled() will be always be
false during class_init(), and the option is never being declared even
when declaring TCG accel:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg,aclint=on
qemu-system-riscv64: Property 'virt-machine.aclint' not found
Fix it by moving the check from class_init() to machine_init(). Tune the
description to mention that the option is TCG only.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: c0716c81b ("hw/riscv/virt: Restrict ACLINT to TCG")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1823
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230811160224.440697-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
cpu->cfg.mvendorid is a 32 bit field and kvm_set_one_reg() always write
a target_ulong val, i.e. a 64 bit field in a 64 bit host.
Given that we're passing a pointer to the mvendorid field, the reg is
reading 64 bits starting from mvendorid and going 32 bits in the next
field, marchid. Here's an example:
$ ./qemu-system-riscv64 -machine virt,accel=kvm -m 2G -smp 1 \
-cpu rv64,marchid=0xab,mvendorid=0xcd,mimpid=0xef(...)
(inside the guest)
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
mmu : sv57
mvendorid : 0xab000000cd
marchid : 0xab
mimpid : 0xef
'mvendorid' was written as a combination of 0xab (the value from the
adjacent field, marchid) and its intended value 0xcd.
Fix it by assigning cpu->cfg.mvendorid to a target_ulong var 'reg' and
use it as input for kvm_set_one_reg(). Here's the result with this patch
applied and using the same QEMU command line:
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
mmu : sv57
mvendorid : 0xcd
marchid : 0xab
mimpid : 0xef
This bug affects only the generic (rv64) CPUs when running with KVM in a
64 bit env since the 'host' CPU does not allow the machine IDs to be
changed via command line.
Fixes: 1fb5a622f7 ("target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230802180058.281385-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
pci: last minute bugfixes
two fixes that seem very safe and important enough to sneak
in before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmTWXvIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpe7sH/0KteOBt324LUYZ+4NR6EQE5KDsCANGiySBK
# r0B6lhcFHvNd2ej0g2hW7lL6nVVCQBkJLLzfNIR/aHkeCmOttfbhv4eF4S6Ho27d
# DpkXCPZRT6F11gY7G1swFapNS/f0P7F5LGRjq4sbuw3FpyHBz0DqCQ0GOab2Qorq
# VfuOfA01nYGNzHOKrEL7k9Io55oqPVcAe+5TaipNCQ4nW82i32ItTyFjQFdLIAay
# qY4HEwP9vPuVwWNdQjXJNfirLMO5GQfEbyKDAjap2sL25zAV2w+mgn7xg/xkTfM6
# iMX2m14lKRMy2hr8dEVh/XdLf7loAN1jSE8/Wdt+PEaexolqxCM=
# =1GLE
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 11 Aug 2023 09:16:50 AM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
pci: Fix the update of interrupt disable bit in PCI_COMMAND register
hw/pci-host: Allow extended config space access for Designware PCIe host
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The PCI_COMMAND register is located at offset 4 within
the PCI configuration space and occupies 2 bytes. The
interrupt disable bit is at the 10th bit, which corresponds
to the byte at offset 5 in the PCI configuration space.
In our testing environment, the guest driver may directly
updates the byte at offset 5 in the PCI configuration space.
The backtrace looks like as following:
at hw/pci/pci.c:1442
at hw/virtio/virtio-pci.c:605
val=5, len=1) at hw/pci/pci_host.c:81
In this situation, the range_covers_byte function called
by the pci_default_write_config function will return false,
resulting in the inability to handle the interrupt disable
update event.
To fix this issue, we can use the ranges_overlap function
instead of range_covers_byte to determine whether the interrupt
bit has been updated.
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Signed-off-by: yuanminghao <yuanmh12@chinatelecom.cn>
Message-Id: <ce2d0437-8faa-4d61-b536-4668f645a959@chinatelecom.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: b6981cb57b ("pci: interrupt disable bit support")
In pcie_bus_realize(), a root bus is realized as a PCIe bus and a non-root
bus is realized as a PCIe bus if its parent bus is a PCIe bus. However,
the child bus "dw-pcie" is realized before the parent bus "pcie" which is
the root PCIe bus. Thus, the extended configuration space is not accessible
on "dw-pcie". The issue can be resolved by adding the
PCI_BUS_EXTENDED_CONFIG_SPACE flag to "pcie" before "dw-pcie" is realized.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Message-Id: <20230809102257.25121-1-jason.chien@sifive.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Jason Chien <<a href="mailto:jason.chien@sifive.com" target="_blank">jason.chien@sifive.com</a>><br>
When starting a remote connection GDB sends an '+':
/* Ack any packet which the remote side has already sent. */
remote_serial_write ("+", 1);
which gets flagged as a garbage character in the gdbstub state
machine. As gdb does send it out lets be permissive about the handling
so we can better see real issues.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: gdb-patches@sourceware.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230810153640.1879717-9-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When load_atom_extract_al16_or_al8 is inexpensive, we want to use
it early, in order to avoid the overhead of required_atomicity.
However, we must not read past the end of the page.
If there are more than 8 bytes remaining, then both the "aligned 16"
and "aligned 8" paths align down so that the read has at least
16 bytes remaining on the page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
OpenRISC FPU Fix for 8.1
A patch to pass the correct exception address when handling floating
point exceptions.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmTT95sACgkQw7McLV5m
# J+TV2g/8CTpOm2bvyFF0YmRhmTBit0kqyDcX1Shi8/2SMO4++CCpIp1mlaxdHZKe
# swdOqIqJeCl3+v+z4xN3ubNMis1Gac8DmXVpVmnUoocDS6m0zM3ly9kETKjYy2vn
# +GLGzOJ+GnPeQ2oApWwOyCqdCwSx2ZuIYK+FRKIx8T1pRm4Nb1gGP6nRKYAy0+C9
# aINdaQEZrFMKl8mlEuGcNmw5YDVvT6M9+KAMaNG0AzG8N9oMCo8VZpeY4z0qkZVp
# forksGucRoWVZ5JWl6kzcPAxxAf49olRx0njfbbUcUlyXtsVQpNhPPsdDGAE5gLu
# 8kHqtRG5OIJUvsZUaedHmJW9BsISnKqIhB7keG72xeBCYPqsKkzpWotq79I50hWY
# arTvAbyEwNCPEi1kpevveuGokoKsHKr/6yJRsA2VXM5AFhIy54DkLNz6Zh8W1OGA
# Nst45kSt7tQsTwxXHTHWGO6gRK/7ZtSr/afsEYZCz9vRUnb4UMeBBAuM9u0W+WYZ
# +hEZivQI7AEVuFbfzCTpw96jAPg4tpJ0JzC0o3Vh/EKIZahrPdzvmBlsV15geu4/
# xa5PBWRFpySLEO/6/I9XrIux8wjQ1NHOTC6NtJkH33tu9tJ9pfmyRs+jdUiNwWyd
# mMz0jvDUhjGaqUYSbXDvBLcSAIKbpXpnay2StSt0S/Enr08KU+o=
# =yZi9
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 09 Aug 2023 01:31:23 PM PDT
# gpg: using RSA key D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* tag 'or1k-pull-request-20230809' of https://github.com/stffrdhrn/qemu:
target/openrisc: Set EPCR to next PC on FPE exceptions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
linux-user: Fixes for mmap syscall emulation
linux-user: Correctly detect access to /proc in openat
util/interval-tree: Check root for null in interval_tree_iter_first
tests/tcg: Disable filename test for info proc mappings
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmTT0O4dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9NeQf/SGtJsvcMdPPcOt1P
# ZK9fBK+gS9XzWvkquSL2wehs0ZY61u2IHznIqsFxhhmPqNTZPKb27u6Cg8DCxYdw
# Hc+YMtjx2MOBv2pXTCc14XWkTsclP2jJaf2VUFIR/MowBJb7Xcgbv53PvRnCn3xT
# KC80Pm6eJZFT0EkQZwHbT8doakkjyIx8JIapdNFvD6Ne0CWCKOwDK9sF5ob1Tf5g
# BXyCw5ZtnCiToYw+RpBnhZ1wsInV+o/MV7FwcgrxGWB+4ovwRLknBzAggHvhz3ZO
# pdCqvobBtUk88+txMX6ewIDYU9BsuOnWDR+j99MD9/kPtbgSLlRYzxJ0PAjCMG6m
# xu0Tyg==
# =n1TD
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 09 Aug 2023 10:46:22 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20230809' of https://gitlab.com/rth7680/qemu:
linux-user: Fix openat() emulation to correctly detect accesses to /proc
util/interval-tree: Check root for null in interval_tree_iter_first
tests/tcg: Disable filename test for info proc mappings
linux-user: Use ARRAY_SIZE with bitmask_transtbl
linux-user: Split out do_mmap
qemu/osdep: Remove fallback for MAP_FIXED_NOREPLACE
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In qemu we catch accesses to files like /proc/cpuinfo or /proc/net/route
and return to the guest contents which would be visible on a real system
(instead what the host would show).
This patch fixes a bug, where for example the accesses
cat /proc////cpuinfo
or
cd /proc && cat cpuinfo
will not be recognized by qemu and where qemu will wrongly show
the contents of the host's /proc/cpuinfo file.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230803214450.647040-2-deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix a crash in qemu-user when running
cat /proc/self/maps
in a chroot, where /proc isn't mounted.
The problem was introduced by commit 3ce3dd8ca9 ("util/selfmap:
Rewrite using qemu/interval-tree.h") where in open_self_maps_1() the
function read_self_maps() is called and which returns NULL if it can't
read the hosts /proc/self/maps file. Afterwards that NULL is fed into
interval_tree_iter_first() which doesn't check if the root node is NULL.
Fix it by adding a check if root is NULL and return NULL in that case.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 3ce3dd8ca9 ("util/selfmap: Rewrite using qemu/interval-tree.h")
Message-Id: <ZNOsq6Z7t/eyIG/9@p100>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This test fails when host page size != guest page size,
because qemu may not be able to directly map the file.
Fixes: a634148269 ("tests/tcg: Add a test for info proc mappings")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than using a zero tuple to end the table, use a macro
to apply ARRAY_SIZE and pass that on to the convert functions.
This fixes two bugs in which the conversion functions required
that both the target and host masks be non-zero in order to
continue, rather than require both target and host masks be
zero in order to terminate.
This affected mmap_flags_tbl when the host does not support
all of the flags we wish to convert (e.g. MAP_UNINITIALIZED).
Mapping these flags to zero is good enough, and matches how
the kernel ignores bits that are unknown.
Fixes: 4b840f96 ("linux-user: Populate more bits in mmap_flags_tbl")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New function that rejects unsupported map types and flags.
In 4b840f96 we should not have accepted MAP_SHARED_VALIDATE
without actually validating the rest of the flags.
Fixes: 4b840f96 ("linux-user: Populate more bits in mmap_flags_tbl")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Reclaim Unit Update operation in I/O Management Receive does not
verify the presence of a configured endurance group prior to accessing
it.
Fix this.
Cc: qemu-stable@nongnu.org
Fixes: 73064edfb8 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
