Qemu's SCLP implementation incorrectly reports that it supports CPU
reconfiguration. If a guest issues a CPU reconfiguration request it
is rejected as invalid command.
Fix the SCLP_HAS_CPU_INFO mask, and remove the unused
SCLP_CMDW_CONFIGURE_CPU and SCLP_CMDW_DECONFIGURE_CPU defines.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Message-ID: <20231024100703.929679-1-hca@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Current Linux distros ship version 5 of the tesseract OCR software,
so the nextcube screen test is ignored there. Let's make the check
more flexible to allow newer versions, too, and remove the old v3
test since most Linux distros don't ship this version anymore.
Message-ID: <20231101204323.35533-1-huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Third RISC-V PR for 8.2
* Rename ext_icboz to ext_zicboz
* Rename ext_icbom to ext_zicbom
* Rename ext_icsr to ext_zicsr
* Rename ext_ifencei to ext_zifencei
* Add RISC-V Virtual IRQs and IRQ filtering support
* Change default linux-user cpu to 'max'
* Update 'virt' machine core limit
* Add query-cpu-model-expansion API
* Rename epmp to smepmp and expose the extension
* Clear pmp/smepmp bits on reset
* Ignore pmp writes when RW=01
* Support zicntr/zihpm flags and disable support
* Correct CSR_MSECCFG operations
* Update mail address for Weiwei Li
* Update RISC-V vector crypto to ratified v1.0.0
* Clear the Ibex/OpenTitan SPI interrupts even if disabled
* Set the OpenTitan priv to 1.12.0
* Support discontinuous PMU counters
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmVJoOEACgkQr3yVEwxT
# gBPwcw/5AXgSVu521IHpobofq4Skc2rpO9P0Hep3IniBuS+5+h2XM3fwWNBaeeGj
# LZgdXDrCfcCnPuFh2I5j1D885xJDncDF4LET9EFtxK+BTT8eC5JpaCnORdV3Zd2T
# C7qdq1r4J/wKBel3cAz1jlLXc2Pssle4NFaMZGmOGlNX/mLJUYkI6BwKG9wNiCI+
# cCRQW5bEv9g8XzPYPsIKhX9aTegDKdV5x4Xj3YyVs8qkZTVM7Ona8GTpy6eShNfL
# h/RW+yvSxLwfKC9YJHesjI1oqhLsAuA7hFu5AVHiedFNAD5FevMZsZwrqjrmeBOG
# 5awBw9XgfXFFl7jQ0VQVRknt/PFANzTmGGbjLUkaXgJ6iTmH7oIMzwbkx2pM/0Qd
# HV2EboUPe5rJl0SNhcDMCJkYJYpt4z6TVXFpN5p10WU4K1AJXZf9P3YkChcxWiSK
# B4DlY4ax3W77voySwbKCvJRIRWCFQZmtl7doFY5dEQz2ERcNfI7VIB1GKIj7BlGm
# AVTCc5G9KghsaB8q0BzYbDplzCggdaaUBRgpIgLS/n22GKJlOisFwMCawWquPkEw
# i0t3ftt+Ket4Qnnq+dO4W3ehR4qW1/XatCWgQ3NCSgUeS4/9VK3h/nz5t+L7iKwp
# mjp86gNN11wcJRsBIIV7nOAmSAs9ybCm2F4J6YAyh3n1IlRVN0Q=
# =2A+W
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 10:28:49 HKT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20231107' of https://github.com/alistair23/qemu: (49 commits)
docs/about/deprecated: Document RISC-V "pmu-num" deprecation
target/riscv: Add "pmu-mask" property to replace "pmu-num"
target/riscv: Use existing PMU counter mask in FDT generation
target/riscv: Don't assume PMU counters are continuous
target/riscv: Propagate error from PMU setup
target/riscv: cpu: Set the OpenTitan priv to 1.12.0
hw/ssi: ibex_spi_host: Clear the interrupt even if disabled
disas/riscv: Replace TABs with space
disas/riscv: Add support for vector crypto extensions
disas/riscv: Add rv_codec_vror_vi for vror.vi
disas/riscv: Add rv_fmt_vd_vs2_uimm format
target/riscv: Move vector crypto extensions to riscv_cpu_extensions
target/riscv: Expose Zvks[c|g] extnesion properties
target/riscv: Add cfg properties for Zvks[c|g] extensions
target/riscv: Expose Zvkn[c|g] extnesion properties
target/riscv: Add cfg properties for Zvkn[c|g] extensions
target/riscv: Expose Zvkb extension property
target/riscv: Replace Zvbb checking by Zvkb
target/riscv: Add cfg property for Zvkb extension
target/riscv: Expose Zvkt extension property
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Block patches:
- One patch to make qcow2's discard-no-unref option do better what it is
supposed to do (i.e. prevent fragmentation)
- Two fixes for zoned requests
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmVJHbgSHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfLn4QAKxuUYZaXirv6K4U2tW4aAJtc5uESdwv
# WYhG7YU7MleBGCY0fRoih5thrPrzRLC8o1QhbRcA36+/PAZf4BYrJEfqLUdzuN5x
# 6Vb1n3NRUzPD1+VfL/B9hVZhFbtTOUZuxPGEqCoHAmqBaeKuYRT1bLZbtRtPVLSk
# 5eTMiyrpRMlBWc7O71eGKLqU4k0vAznwHBGf2Z93qWAsKcRZCwbAWYa7Q6rJ9jJ8
# 1jNsQuAk0p74/uGEpFhoEVrFEcV6pMbI4+jB9i0t9YYxT0tLIdIX1VUx+AHJfItk
# IF2stB6SFOaAy2W3Fn+0oJvz40aMLzg9VjEeTpGmdlKC67ZTYa6Obwzy5WNLPIap
# k7VUheUEe8qoKUtxQNxGLR/HKEJSFXyhU0lgAGxE1gl2xc1QFFFsrimpwFd3d37j
# 3PwfhjARHonf4ZXgsvtIjb7nG9seMZYO7Vht0OztJyW8c2XN5OFVPir9xLbd9VUg
# wZNGB8jAsHgj77+S/mRIwpP+laKL8wB7zYZ1mgFI98QJIYqL8tGdV/IiUhLljHzc
# XAmwekOhBMMbgHhliBy9zDuTy59+zZ0FoxZPn/JvBjqBAkEnz9EbhHxi2imQg+1d
# XSoLbx1X1yEbepWz8mCGiveLIPkt+3qMJuuQF76nURaA+nm3tCl/nKca6QLnVKzU
# 2QtPWS0qRmwd
# =5w7S
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 01:09:12 HKT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2023-11-06' of https://gitlab.com/hreitz/qemu:
file-posix: fix over-writing of returning zone_append offset
block/file-posix: fix update_zones_wp() caller
qcow2: keep reference on zeroize with discard-no-unref enabled
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vfio queue:
* Support for non 64b IOVA space
* Introduction of a PCIIOMMUOps callback structure to ease future
extensions
* Fix for a buffer overrun when writing the VF token
* PPC cleanups preparing ground for IOMMUFD support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmVI+bIACgkQUaNDx8/7
# 7KHW4g/9FmgX0k2Elm1BAul3slJtuBT8/iHKfK19rhXICxhxS5xBWJA8FmosTWAT
# 91YqQJhOHARxLd9VROfv8Fq8sAo+Ys8bP3PTXh5satjY5gR9YtmMSVqvsAVLn7lv
# a/0xp7wPJt2UeKzvRNUqFXNr7yHPwxFxbJbmmAJbNte8p+TfE2qvojbJnu7BjJbg
# sTtS/vFWNJwtuNYTkMRoiZaUKEoEZ8LnslOqKUjgeO59g4i3Dq8e2JCmHANPFWUK
# cWmr7AqcXgXEnLSDWTtfN53bjcSCYkFVb4WV4Wv1/7hUF5jQ4UR0l3B64xWe0M3/
# Prak3bWOM/o7JwLBsgaWPngXA9V0WFBTXVF4x5qTwhuR1sSV8MxUvTKxI+qqiEzA
# FjU89oSZ+zXId/hEUuTL6vn1Th8/6mwD0L9ORchNOQUKzCjBzI4MVPB09nM3AdPC
# LGThlufsZktdoU2KjMHpc+gMIXQYsxkgvm07K5iZTZ5eJ4tV5KB0aPvTZppGUxe1
# YY9og9F3hxjDHQtEuSY2rzBQI7nrUpd1ZI5ut/3ZgDWkqD6aGRtMme4n4GsGsYb2
# Ht9+d2RL9S8uPUh+7rV8K/N3+vXgXRaEYTuAScKtflEbA7YnZA5nUdMng8x0kMTQ
# Y73XCd4UGWDfSSZsgaIHGkM/MRIHgmlrfcwPkWqWW9vF+92O6Hw=
# =/Du0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 22:35:30 HKT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20231106' of https://github.com/legoater/qemu: (22 commits)
vfio/common: Move vfio_host_win_add/del into spapr.c
vfio/spapr: Make vfio_spapr_create/remove_window static
vfio/container: Move spapr specific init/deinit into spapr.c
vfio/container: Move vfio_container_add/del_section_window into spapr.c
vfio/container: Move IBM EEH related functions into spapr_pci_vfio.c
util/uuid: Define UUID_STR_LEN from UUID_NONE string
util/uuid: Remove UUID_FMT_LEN
vfio/pci: Fix buffer overrun when writing the VF token
util/uuid: Add UUID_STR_LEN definition
hw/pci: modify pci_setup_iommu() to set PCIIOMMUOps
test: Add some tests for range and resv-mem helpers
virtio-iommu: Consolidate host reserved regions and property set ones
virtio-iommu: Implement set_iova_ranges() callback
virtio-iommu: Record whether a probe request has been issued
range: Introduce range_inverse_array()
virtio-iommu: Introduce per IOMMUDevice reserved regions
util/reserved-region: Add new ReservedRegion helpers
range: Make range_compare() public
virtio-iommu: Rename reserved_regions into prop_resv_regions
vfio: Collect container iova range info
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hyper-V Dynamic Memory protocol driver.
This driver is like virtio-balloon on steroids for Windows guests:
it allows both changing the guest memory allocation via ballooning and
inserting pieces of extra RAM into it on demand from a provided memory
backend via Windows-native Hyper-V Dynamic Memory protocol.
* Preparatory patches to support empty memory devices and ones with
large alignment requirements.
* Revert of recently added "hw/virtio/virtio-pmem: Replace impossible
check by assertion" commit 5960f254db since this series makes this
situation possible again.
* Protocol definitions.
* Hyper-V DM protocol driver (hv-balloon) base (ballooning only).
* Hyper-V DM protocol driver (hv-balloon) hot-add support.
* qapi query-memory-devices support for the driver.
* qapi HV_BALLOON_STATUS_REPORT event.
* The relevant PC machine plumbing.
* New MAINTAINERS entry for the above.
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCAAdFiEE4ndqq6COJv9aG0oJUrHW6VHQzgcFAmVI81IACgkQUrHW6VHQ
# zgdzTgv+I5eV2R01YLOBBJhBjzxZ4/BUqkuUHNxHpfjuCqEIzPb7FIfoZ4ZyXZFT
# YJdSE4lPeTZLrmmi/Nt6G0rUKDvdCeIgkS2VLHFSsTV8IzcT71BTRGzV0zAjUF5v
# yDH6uzo6e9gmaziIalRjibUxSDjCQmoCifms2rS2DwazADudUp+naGfm+3uyA0gM
# raOfBfRkNZsDqhXg2ayuqPIES75xQONoON9xYPKDAthS48POEbqtWBKuFopr3kXY
# y0eph+NAw+RajCyLYKM3poIgaSu3l4WegInuKQffzqKR8dxrbwPdCmtgo6NSHx0W
# uDfl7FUBnGzrR18VU4ZfTSrF5SVscGwF9EL7uocJen15inJjl1q3G53uZgyGzHLC
# cw8fKMjucmE8njQR2qiMyX0b+T4+9nKO1rykBgTG/+c9prRUVoxYpFCF117Ei0U8
# QzLGACW1oK+LV41bekWAye7w9pShUtFaxffhPbJeZDDGh7q0x61R3Z3yKkA07p46
# /YWWFWUD
# =RAb0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 22:08:18 HKT
# gpg: using RSA key E2776AABA08E26FF5A1B4A0952B1D6E951D0CE07
# gpg: Good signature from "Maciej S. Szmigiero <mail@maciej.szmigiero.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 727A 0D4D DB9E D9F6 039B ECEF 847F 5E37 90CE 0977
# Subkey fingerprint: E277 6AAB A08E 26FF 5A1B 4A09 52B1 D6E9 51D0 CE07
* tag 'pull-hv-balloon-20231106' of https://github.com/maciejsszmigiero/qemu:
MAINTAINERS: Add an entry for Hyper-V Dynamic Memory Protocol
hw/i386/pc: Support hv-balloon
qapi: Add HV_BALLOON_STATUS_REPORT event and its QMP query command
qapi: Add query-memory-devices support to hv-balloon
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) hot-add support
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) base
Add Hyper-V Dynamic Memory Protocol definitions
memory-device: Drop size alignment check
Revert "hw/virtio/virtio-pmem: Replace impossible check by assertion"
memory-device: Support empty memory devices
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Bugfixes for emulated Xen support
Selected bugfixes for mainline and stable, especially to the per-vCPU
local APIC vector delivery mode for event channel notifications, which
was broken in a number of ways.
The xen-block driver has been defaulting to the wrong protocol for x86
guest, and this fixes that — which is technically an incompatible change
but I'm fairly sure nobody relies on the broken behaviour (and in
production I *have* seen guests which rely on the correct behaviour,
which now matches the blkback driver in the Linux kernel).
A handful of other simple fixes for issues which came to light as new
features (qv) were being developed.
# -----BEGIN PGP SIGNATURE-----
#
# iQJIBAABCAAyFiEEvgfZ/VSAmrLEsP9fY3Ys2mfi81kFAmVIvv4UHGR3bXcyQGlu
# ZnJhZGVhZC5vcmcACgkQY3Ys2mfi81nFmRAAvK3VNuGDV56TJqFdtEWD+3jzSZU0
# CoL1mxggvwnlFn1SdHvbC5jl+UscknErcNbqlxMTTg9jQiiQqzFuaWujJnL0dEOY
# RJiS2scKln/1gv9NRbLE31FjPwoNz+zJI/iMvdutjT7Ll//v34jY0vd1Y5Wo53ay
# MBschuuxD1sUUTHNj5f9afrgZaetJfgBSNZraiLR5T2HEadJVJuhItdGxW1+KaPI
# zBIcflIeZmJl9b/L1a2bP3KJmRo8QzHB56X3uzwkPhYhYSU2dnCaJTLCkiNfK+Qh
# SgCBMlzsvJbIZqDA9YPOGdKK1ArfTJRmRDwAkqH0YQknQGoIkpN+7eQiiSv6PMS5
# U/93V7r6MfaftIs6YdWSnFozWeBuyKZL9H2nAXqZgL5t6uEMVR8Un/kFnGfslTFY
# 9gQ1o4IM6ECLiXhIP/sPNOprrbFb0HU7QPtEDJOxrJzBM+IfLbldRHn4p9CccqQA
# LHvJF98VhX1d0nA0iZBT3qqfKPbmUhRV9Jrm+WamqNrRXhiGdF8EidsUf8RWX+JD
# xZWJiqhTwShxdLE6TC/JgFz4cQCVHG8QiZstZUbdq59gtz9YO5PGByMgI3ds7iNQ
# lGXAPFm+1wU85W4dZOH7qyim6d9ytFm2Fm110BKM8l9B6UKEuKHpsxXMqdo65JXI
# 7uBKbVpdPKul0DY=
# =dQ7h
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 18:25:02 HKT
# gpg: using RSA key BE07D9FD54809AB2C4B0FF5F63762CDA67E2F359
# gpg: issuer "dwmw2@infradead.org"
# gpg: Good signature from "David Woodhouse <dwmw2@infradead.org>" [unknown]
# gpg: aka "David Woodhouse <dwmw2@exim.org>" [unknown]
# gpg: aka "David Woodhouse <david@woodhou.se>" [unknown]
# gpg: aka "David Woodhouse <dwmw2@kernel.org>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: BE07 D9FD 5480 9AB2 C4B0 FF5F 6376 2CDA 67E2 F359
* tag 'pull-xenfv-stable-20231106' of git://git.infradead.org/users/dwmw2/qemu:
hw/xen: use correct default protocol for xen-block on x86
hw/xen: take iothread mutex in xen_evtchn_reset_op()
hw/xen: fix XenStore watch delivery to guest
hw/xen: don't clear map_track[] in xen_gnttab_reset()
hw/xen: select kernel mode for per-vCPU event channel upcall vector
i386/xen: fix per-vCPU upcall vector for Xen emulation
i386/xen: Don't advertise XENFEAT_supervisor_mode_kernel
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using a mask instead of the number of PMU devices supports the accurate
emulation of platforms that have a discontinuous set of PMU counters.
The "pmu-num" property now generates a warning when used by the user on
the command line.
Rather than storing the value for "pmu-num" convert it directly to the
mask if it is specified (overwriting the default "pmu-mask" value)
likewise the value is calculated from the mask if the property value is
obtained.
In the unusual situation that both "pmu-mask" and "pmu-num" are provided
then then the order on the command line determines which takes
precedence (later overwriting earlier.)
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231031154000.18134-5-rbradford@rivosinc.com>
[Changes by AF
- Fixup ext_zihpm logic after rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We currently don't clear the interrupts if they are disabled. This means
that if an interrupt occurs and the guest disables interrupts the QEMU
IRQ will remain high.
This doesn't immediately affect guests, but if the
guest re-enables interrupts it's possible that we will miss an
interrupt as it always remains set.
Let's update the logic to always call qemu_set_irq() even if the
interrupts are disabled to ensure we set the level low. The level will
never be high unless interrupts are enabled, so we won't generate
interrupts when we shouldn't.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231102003424.2003428-2-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zihpm is the Hardware Performance Counters extension described in
chapter 12 of the unprivileged spec. It describes support for 29
unprivileged performance counters, hpmcounter3-hpmcounter31.
As with zicntr, QEMU already implements zihpm before it was even an
extension. zihpm is also part of the RVA22 profile, so add it to QEMU
to complement the future profile implementation. Default it to 'true'
for all existing CPUs since it was always present in the code.
As for disabling it, there is already code in place in
target/riscv/csr.c in all predicates for these counters (ctr() and
mctr()) that disables them if cpu->cfg.pmu_num is zero. Thus, setting
cpu->cfg.pmu_num to zero if 'zihpm=false' is enough to disable the
extension.
Set cpu->pmu_avail_ctrs mask to zero as well since this is also checked
to verify if the counters exist.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231023153927.435083-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicntr is the Base Counters and Timers extension described in chapter 12
of the unprivileged spec. It describes support for RDCYCLE, RDTIME and
RDINSTRET.
QEMU already implements it in TCG way before it was a discrete
extension. zicntr is part of the RVA22 profile, so let's add it to QEMU
to make the future profile implementation flag complete. Given than it
represents an already existing feature, default it to 'true' for all
CPUs.
For TCG, we need a way to disable zicntr if the user wants to. This is
done by restricting access to the CYCLE, TIME, and INSTRET counters via
the 'ctr()' predicate when we're about to access them.
Disabling zicntr happens via the command line or if its dependency,
zicsr, happens to be disabled. We'll check for zicsr during realize()
and, in case it's absent, disable zicntr. However, if the user was
explicit about having zicntr support, error out instead of disabling it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231023153927.435083-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the Priv spec: "The R, W, and X fields form a collective WARL
field for which the combinations with R=0 and W=1 are reserved."
However currently such writes are not ignored as ought to be. The
combinations with RW=01 are allowed only when the Smepmp extension
is enabled and mseccfg.MML is set.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231019065705.1431868-1-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the Priv and Smepmp specifications, certain bits such as the 'L'
bit of pmp entries and mseccfg.MML can only be cleared upon reset and it
is necessary to do so to allow 'M' mode firmware to correctly reinitialize
the pmp/smpemp state across reboots. As required by the spec, also clear
the 'A' field of pmp entries.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231019065644.1431798-1-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the recently added riscv_cpu_accelerator_compatible() to filter
unavailable CPUs for a given accelerator. At this moment this is the
case for a QEMU built with KVM and TCG support querying a binary running
with TCG:
qemu-system-riscv64 -S -M virt,accel=tcg -display none
-qmp tcp:localhost:1234,server,wait=off
./qemu/scripts/qmp/qmp-shell localhost:1234
(QEMU) query-cpu-model-expansion type=full model={"name":"host"}
{"error": {"class": "GenericError", "desc": "'host' CPU not available with tcg"}}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add an API to check if a given CPU is compatible with the current
accelerator.
This will allow query-cpu-model-expansion to work properly in conditions
where QEMU supports both accelerators (TCG and KVM), QEMU is then
launched using TCG, and the API requests information about a KVM only
CPU (e.g. 'host' CPU).
KVM doesn't have such restrictions and, at least in theory, all CPUs
models should work with KVM. We will revisit this API in case we decide
to restrict the amount of KVM CPUs we support.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Callers can add 'props' when querying for a cpu model expansion to see
if a given CPU model supports a certain criteria, and what's the
resulting CPU object.
If we have 'props' to handle, gather it in a QDict and use the new
riscv_cpuobj_validate_qdict_in() helper to validate it. This helper will
add the custom properties in the CPU object and validate it using
riscv_cpu_finalize_features(). Users will be aware of validation errors
if any occur, if not a CPU object with 'props' will be returned.
Here's an example with the veyron-v1 vendor CPU. Disabling vendor CPU
extensions is allowed, assuming the final config is valid. Disabling
'smstateen' is a valid expansion:
(QEMU) query-cpu-model-expansion type=full model={"name":"veyron-v1","props":{"smstateen":false}}
{"return": {"model": {"name": "veyron-v1", "props": {"zicond": false, ..., "smstateen": false, ...}
But enabling extensions isn't allowed for vendor CPUs. E.g. enabling 'V'
for the veyron-v1 CPU isn't allowed:
(QEMU) query-cpu-model-expansion type=full model={"name":"veyron-v1","props":{"v":true}}
{"error": {"class": "GenericError", "desc": "'veyron-v1' CPU does not allow enabling extensions"}}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
