Upstream clang 18 (and backports to clang 17 in Fedora and RHEL)
implemented support for __attribute__((cleanup())) in its Thread Safety
Analysis, so we can now actually have a proper implementation of
WITH_GRAPH_RDLOCK_GUARD() that understands when we acquire and when we
release the lock.
-Wthread-safety is now only enabled if the compiler is new enough to
understand this pattern. In theory, we could have used some #ifdefs to
keep the existing basic checks on old compilers, but as long as someone
runs a newer compiler (and our CI does), we will catch locking problems,
so it's probably not worth keeping multiple implementations for this.
The implementation can't use g_autoptr any more because the glib macros
define wrapper functions that don't have the right TSA attributes, so
the compiler would complain about them. Just use the cleanup attribute
directly instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240627181245.281403-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The graph lock needs to be held when calling bdrv_co_pdiscard(). Fix
block_copy_task_entry() to take it for the call.
WITH_GRAPH_RDLOCK_GUARD() was implemented in a weak way because of
limitations in clang's Thread Safety Analysis at the time, so that it
only asserts that the lock is held (which allows calling functions that
require the lock), but we never deal with the unlocking (so even after
the scope of the guard, the compiler assumes that the lock is still
held). This is why the compiler didn't catch this locking error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240627181245.281403-2-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockdevSnapshotInternal is the arguments type of command
blockdev-snapshot-internal-sync. Its doc comment contains this note:
# .. note:: In a transaction, if @name is empty or any snapshot matching
# @name exists, the operation will fail. Only some image formats
# support it; for example, qcow2, and rbd.
"In a transaction" is misleading, and "if @name is empty or any
snapshot matching @name exists, the operation will fail" is redundant
with the command's Errors documentation. Drop.
The remainder is fine. Move it to the command's doc comment, where it
is more prominently visible, with a slight rephrasing for clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240718123609.3063055-1-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A new minor version of OpenSBI was just released after our bump to
OpenSBI 1.5. It contains significant bug fixes that it's worth doing
a new update for QEMU 9.1.
Submodule roms/opensbi 455de672dd..43cace6c36:
> lib: sbi: check result of pmp_get() in is_pmp_entry_mapped()
> lib: sbi: fwft: fix incorrect size passed to sbi_zalloc()
> lib: sbi: dbtr: fix potential NULL pointer dereferences
> include: Adjust Sscofpmf mhpmevent mask for upper 8 bits
> lib: sbi_hsm: Save/restore menvcfg only when it exists
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240805120259.1705016-2-dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Coverity complained about the possible out-of-bounds access with
counter_virt/counter_virt_prev because these two arrays are
accessed with privilege mode. However, these two arrays are accessed
only when virt is enabled. Thus, the privilege mode can't be M mode.
Add the asserts anyways to detect any wrong usage of these arrays
in the future.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Fixes: Coverity CID 1558459
Fixes: Coverity CID 1558462
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240724-fixes-v1-1-4a64596b0d64@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Sweep the entire documentation again. Last done in commit
209e64d9ed (qapi: Refill doc comments to conform to current
conventions).
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240729065220.860163-1-armbru@redhat.com>
[Straightforward conflict with commit 442110bc6f resolved]
Analyzing qemu-produced core dumps of multi-threaded apps runs into:
(gdb) info threads
[...]
21 Thread 0x3ff83cc0740 (LWP 9295) warning: Couldn't find general-purpose registers in core file.
<unavailable> in ?? ()
The reason is that all pr_pid values are the same, because the same
TaskState is used for all CPUs when generating NT_PRSTATUS notes.
Fix by using TaskStates associated with individual CPUs.
Cc: qemu-stable@nongnu.org
Fixes: 243c470662 ("linux-user/elfload: Write corefile elf header in one block")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240801202340.21845-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When a channel fails to create, the code currently just returns. This
is wrong for two reasons:
1) Channel n+1 will not get to initialize it's semaphores, leading to
an assert when terminate_threads tries to post to it:
qemu-system-x86_64: ../util/qemu-thread-posix.c:92:
qemu_mutex_lock_impl: Assertion `mutex->initialized' failed.
2) (theoretical) If channel n-1 already started creation it will
defeat the purpose of the channels_created logic which is in place
to avoid migrate_fd_cleanup() to run while channels are still being
created.
This cannot really happen today because the current failure cases
for multifd_new_send_channel_create() are all synchronous,
resulting from qio_channel_file_new_path() getting a bad
filename. This would hit all channels equally.
But I don't want to set a trap for future people, so have all
channels try to create (even if failing), and only fail after the
channels_created semaphore has been posted.
While here, remove the error_report_err call. There's one already at
migrate_fd_cleanup later on.
Cc: qemu-stable@nongnu.org
Reported-by: Jim Fehlig <jfehlig@suse.com>
Fixes: b7b03eb614 ("migration/multifd: Add outgoing QIOChannelFile support")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The QIOChannelFile object already has its reference decremented by
g_autoptr. Trying to unref an extra time causes:
ERROR:../qom/object.c:1241:object_unref: assertion failed: (obj->ref > 0)
Fixes: a701c03dec ("migration: Drop reference to QIOChannel if file seeking fails")
Fixes: 6d3279655a ("migration: Fix file migration with fdset")
Reported-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The vcek-disabled property of the sev-snp-guest object is misspelled
vcek-required (which I suppose would use the opposite polarity) in
the call to object_class_property_add_bool(). Fix it.
Reported-by: Zixi Chen <zixchen@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmasTgwACgkQ7wSWWzmN
# YhFUtAgAq45v7fQJ7cKKwRam/VrIkxT5cM59ODwzLSL9kPWfL6f/bJ7xM/zvLyvn
# LNBXFWWu+eNKA73f95cckZwaqZ4U6giGbiesCACn1IpgVtieLS+Lq78jsifKIAsR
# yxFvbT9oLhU0dZ1Up3+isc6V+jeAE4ZYu4KOiIt7PscTEzkJl+vSUjN4X9rRVtUD
# PzONUacL6MoTJtX8UZJZXNzLN9JTsN39Gx+LSDGQ27MDmDvE3R9BW+T0ZgF9JQZ7
# wnrL5sharqF3gxa7X55fPBI1qwY5gWcH0yyJpRdM8guA13vhtvlrhNSypip9eKWi
# HtPHUTKEB5YOvF236WRiuQPIm/GNpA==
# =7HGN
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Aug 2024 01:10:04 PM AEST
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
net: Reinstate '-net nic, model=help' output as documented in man page
net: update netdev stream man page with the reconnect parameter
net: update netdev dgram man page with unix socket
net: update netdev stream man page with unix socket
net: update netdev stream/dgram man page
virtio-net: Fix network stall at the host side waiting for kick
virtio-net: Ensure queue index fits with RSS
rtl8139: Fix behaviour for old kernels.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While refactoring the NIC initialization code, I broke '-net nic,model=help'
which no longer outputs a list of available NIC models.
Fixes: 2cdeca04ad ("net: report list of available models according to platform")
Cc: qemu-stable@nongnu.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
"-netdev stream" supports a reconnect parameter that attempts to
reconnect automatically the socket if it is disconnected. The code
has been added but the man page has not been updated.
Fixes: 148fbf0d58 ("net: stream: add a new option to automatically reconnect"
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add the description of "-netdev dgram" with a unix domain socket.
The code has been added but the man page has not been updated.
Fixes: 784e7a2531 ("net: dgram: add unix socket")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add the description of "-netdev stream" with a unix domain socket.
The code has been added but the man page has not been updated.
Include an example how to use "-netdev stream" and "passt" in place
of "-netdev user".
("passt" is a non privileged translation proxy between layer-2, like
"-netdev stream", and layer-4 on host, like TCP, UDP, ICMP/ICMPv6 echo)
Fixes: 13c6be9661 ("net: stream: add unix socket")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add the description of "-netdev stream" and "-netdev dgram" in the QEMU
manpage.
Add some examples on how to use them.
Fixes: 5166fe0ae4 ("qapi: net: add stream and dgram netdevs")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Patch 06b1297017 ("virtio-net: fix network stall under load")
added double-check to test whether the available buffer size
can satisfy the request or not, in case the guest has added
some buffers to the avail ring simultaneously after the first
check. It will be lucky if the available buffer size becomes
okay after the double-check, then the host can send the packet
to the guest. If the buffer size still can't satisfy the request,
even if the guest has added some buffers, viritio-net would
stall at the host side forever.
The patch enables notification and checks whether the guest has
added some buffers since last check of available buffers when
the available buffers are insufficient. If no buffer is added,
return false, else recheck the available buffers in the loop.
If the available buffers are sufficient, disable notification
and return true.
Changes:
1. Change the return type of virtqueue_get_avail_bytes() from void
to int, it returns an opaque that represents the shadow_avail_idx
of the virtqueue on success, else -1 on error.
2. Add a new API: virtio_queue_enable_notification_and_check(),
it takes an opaque as input arg which is returned from
virtqueue_get_avail_bytes(). It enables notification firstly,
then checks whether the guest has added some buffers since
last check of available buffers or not by virtio_queue_poll(),
return ture if yes.
The patch also reverts patch "06b12970174".
The case below can reproduce the stall.
Guest 0
+--------+
| iperf |
---------------> | server |
Host | +--------+
+--------+ | ...
| iperf |----
| client |---- Guest n
+--------+ | +--------+
| | iperf |
---------------> | server |
+--------+
Boot many guests from qemu with virtio network:
qemu ... -netdev tap,id=net_x \
-device virtio-net-pci-non-transitional,\
iommu_platform=on,mac=xx:xx:xx:xx:xx:xx,netdev=net_x
Each guest acts as iperf server with commands below:
iperf3 -s -D -i 10 -p 8001
iperf3 -s -D -i 10 -p 8002
The host as iperf client:
iperf3 -c guest_IP -p 8001 -i 30 -w 256k -P 20 -t 40000
iperf3 -c guest_IP -p 8002 -i 30 -w 256k -P 20 -t 40000
After some time, the host loses connection to the guest,
the guest can send packet to the host, but can't receive
packet from the host.
It's more likely to happen if SWIOTLB is enabled in the guest,
allocating and freeing bounce buffer takes some CPU ticks,
copying from/to bounce buffer takes more CPU ticks, compared
with that there is no bounce buffer in the guest.
Once the rate of producing packets from the host approximates
the rate of receiveing packets in the guest, the guest would
loop in NAPI.
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
| need kick the host?
| NAPI continues
v
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
v
... ...
On the other hand, the host fetches free buf from avail
ring, if the buf in the avail ring is not enough, the
host notifies the guest the event by writing the avail
idx read from avail ring to the event idx of used ring,
then the host goes to sleep, waiting for the kick signal
from the guest.
Once the guest finds the host is waiting for kick singal
(in virtqueue_kick_prepare_split()), it kicks the host.
The host may stall forever at the sequences below:
Host Guest
------------ -----------
fetch buf, send packet receive packet ---
... ... |
fetch buf, send packet add buf |
... add buf virtnet_poll
buf not enough avail idx-> add buf |
read avail idx add buf |
add buf ---
receive packet ---
write event idx ... |
wait for kick add buf virtnet_poll
... |
---
no more packet, exit NAPI
In the first loop of NAPI above, indicated in the range of
virtnet_poll above, the host is sending packets while the
guest is receiving packets and adding buffers.
step 1: The buf is not enough, for example, a big packet
needs 5 buf, but the available buf count is 3.
The host read current avail idx.
step 2: The guest adds some buf, then checks whether the
host is waiting for kick signal, not at this time.
The used ring is not empty, the guest continues
the second loop of NAPI.
step 3: The host writes the avail idx read from avail
ring to used ring as event idx via
virtio_queue_set_notification(q->rx_vq, 1).
step 4: At the end of the second loop of NAPI, recheck
whether kick is needed, as the event idx in the
used ring written by the host is beyound the
range of kick condition, the guest will not
send kick signal to the host.
Fixes: 06b1297017 ("virtio-net: fix network stall under load")
Cc: qemu-stable@nongnu.org
Signed-off-by: Wencheng Yang <east.moutain.yang@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Ensure the queue index points to a valid queue when software RSS
enabled. The new calculation matches with the behavior of Linux's TAP
device with the RSS eBPF program.
Fixes: 4474e37a5b ("virtio-net: implement RX RSS processing")
Reported-by: Zhibin Hu <huzhibin5@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Old linux kernel rtl8139 drivers (ex. debian 2.1) uses outb to set the rx
mode for RxConfig. Unfortunatelly qemu does not support outb for RxConfig.
Signed-off-by: Hans <sungdgdhtryrt@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
virtio,pci,pc: fixes
revert virtio pci/SR-IOV emulation at author's request
a couple of fixes in virtio,vtd
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmarSFUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp7fwH/3wNCGhgHhF5dhKRKRn8hqhxYl2rXnv0LKYI
# Rgsoxh3kw6oKBXxLG/B4V2GkqDSU8q8NuHnvGmmAUQ/uHmwTWbBbrZ+HwMMmaRhT
# Ox8kIXiVYAtw24yLKDvyoKbMLjLKb9/QqTT4rbsQ9yl5PLxwoGGJEu/ifM1MbZZY
# f5CDtj3hRArIZEjMt0Q3h+G7///BRVZxQ/0de57whGXcr349qgMpiIThvlCOj7Yf
# rQ68AGS4yk1Jk0oxiYyWjo43o8JbB5bMnCrkzDy4ZdY5Sw9zGb48CmcrBUl4J9lv
# NVDYK63dsvRS0ew7PxaEwu32MIQLJcn5s521m81/ZAhbdyzLnlI=
# =/2+K
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Aug 2024 06:33:25 PM AEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
intel_iommu: Fix for IQA reg read dropped DW field
hw/i386/amd_iommu: Don't leak memory in amdvi_update_iotlb()
Revert "hw/pci: Rename has_power to enabled"
Revert "hw/ppc/spapr_pci: Do not create DT for disabled PCI device"
Revert "hw/ppc/spapr_pci: Do not reject VFs created after a PF"
Revert "pcie_sriov: Do not manually unrealize"
Revert "pcie_sriov: Ensure VF function number does not overflow"
Revert "pcie_sriov: Reuse SR-IOV VF device instances"
Revert "pcie_sriov: Release VFs failed to realize"
Revert "pcie_sriov: Remove num_vfs from PCIESriovPF"
Revert "pcie_sriov: Register VFs after migration"
Revert "hw/pci: Fix SR-IOV VF number calculation"
Revert "pcie_sriov: Ensure PF and VF are mutually exclusive"
Revert "pcie_sriov: Check PCI Express for SR-IOV PF"
Revert "pcie_sriov: Allow user to create SR-IOV device"
Revert "virtio-pci: Implement SR-IOV PF"
Revert "virtio-net: Implement SR-IOV VF"
Revert "docs: Document composable SR-IOV device"
virtio-rng: block max-bytes=0
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit ad18376b90 we added an assert that the level value was
in-bounds for the array we're about to index into. However, the
assert condition is wrong -- env->config->interrupt_vector is an
array of uint32_t, so we should bounds check the index against
ARRAY_SIZE(...), not against sizeof().
Resolves: Coverity CID 1507131
Fixes: ad18376b90 ("target/xtensa: Assert that interrupt level is within bounds")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240731172246.3682311-1-peter.maydell@linaro.org
The FMOPA (widening) SME instruction takes pairs of half-precision
floating point values, widens them to single-precision, does a
two-way dot product and accumulates the results into a
single-precision destination. We don't quite correctly handle the
FPCR bits FZ and FZ16 which control flushing of denormal inputs and
outputs. This is because at the moment we pass a single float_status
value to the helper function, which then uses that configuration for
all the fp operations it does. However, because the inputs to this
operation are float16 and the outputs are float32 we need to use the
fp_status_f16 for the float16 input widening but the normal fp_status
for everything else. Otherwise we will apply the flushing control
FPCR.FZ16 to the 32-bit output rather than the FPCR.FZ control, and
incorrectly flush a denormal output to zero when we should not (or
vice-versa).
(In commit 207d30b5fd we tried to fix the FZ handling but
didn't get it right, switching from "use FPCR.FZ for everything" to
"use FPCR.FZ16 for everything".)
Pass the CPU env to the sme_fmopa_h helper instead of an fp_status
pointer, and have the helper pass an extra fp_status into the
f16_dotadd() function so that we can use the right status for the
right parts of this operation.
Cc: qemu-stable@nongnu.org
Fixes: 207d30b5fd ("target/arm: Use FPST_F16 for SME FMOPA (widening)")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2373
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
If VT-D hardware supports scalable mode, Linux will set the IQA DW field
(bit11). In qemu, the vtd_mem_write and vtd_update_iq_dw set DW field well.
However, vtd_mem_read the DW field wrong because "& VTD_IQA_QS" dropped the
value of DW.
Replace "&VTD_IQA_QS" with "& (VTD_IQA_QS | VTD_IQA_DW_MASK)" could save
the DW field.
Test patch as below:
config the "x-scalable-mode" option:
"-device intel-iommu,caching-mode=on,x-scalable-mode=on,aw-bits=48"
After Linux OS boot, check the IQA_REG DW Field by usage 1 or 2:
1. IOMMU_DEBUGFS:
Before fix:
cat /sys/kernel/debug/iommu/intel/iommu_regset |grep IQA
IQA 0x90 0x00000001001da001
After fix:
cat /sys/kernel/debug/iommu/intel/iommu_regset |grep IQA
IQA 0x90 0x00000001001da801
Check DW field(bit11) is 1.
2. devmem2 read the IQA_REG (offset 0x90):
Before fix:
devmem2 0xfed90090
/dev/mem opened.
Memory mapped at address 0x7f72c795b000.
Value at address 0xFED90090 (0x7f72c795b090): 0x1DA001
After fix:
devmem2 0xfed90090
/dev/mem opened.
Memory mapped at address 0x7fc95281c000.
Value at address 0xFED90090 (0x7fc95281c090): 0x1DA801
Check DW field(bit11) is 1.
Signed-off-by: yeeli <seven.yi.lee@gmail.com>
Message-Id: <20240725031858.1529902-1-seven.yi.lee@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In amdvi_update_iotlb() we will only put a new entry in the hash
table if to_cache.perm is not IOMMU_NONE. However we allocate the
memory for the new AMDVIIOTLBEntry and for the hash table key
regardless. This means that in the IOMMU_NONE case we will leak the
memory we alloacted.
Move the allocations into the if() to the point where we know we're
going to add the item to the hash table.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2452
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240731170019.3590563-1-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
