The STE_CTXPTR() and STE_S2TTB() macros both extract two halves
of an address from fields in the STE and combine them into a
single value to return. The current code for this uses a GCC
statement expression. There are two problems with this:
(1) The type chosen for the variable in the statement expr
is 'unsigned long', which might not be 64 bits
(2) the name chosen for the variable causes -Wshadow warnings
because it's the same as a variable in use at the callsite:
In file included from ../../hw/arm/smmuv3.c:34:
../../hw/arm/smmuv3.c: In function ‘smmu_get_cd’:
../../hw/arm/smmuv3-internal.h:538:23: warning: declaration of ‘addr’ shadows a previous local [-Wshadow=compatible-local]
538 | unsigned long addr; \
| ^~~~
../../hw/arm/smmuv3.c:339:23: note: in expansion of macro ‘STE_CTXPTR’
339 | dma_addr_t addr = STE_CTXPTR(ste);
| ^~~~~~~~~~
../../hw/arm/smmuv3.c:339:16: note: shadowed declaration is here
339 | dma_addr_t addr = STE_CTXPTR(ste);
| ^~~~
Sidestep both of these problems by just using a single
expression rather than a statement expr.
For CMD_ADDR, we got the type of the variable right but still
run into -Wshadow problems:
In file included from ../../hw/arm/smmuv3.c:34:
../../hw/arm/smmuv3.c: In function ‘smmuv3_range_inval’:
../../hw/arm/smmuv3-internal.h:334:22: warning: declaration of ‘addr’ shadows a previous local [-Wshadow=compatible-local]
334 | uint64_t addr = high << 32 | (low << 12); \
| ^~~~
../../hw/arm/smmuv3.c:1104:28: note: in expansion of macro ‘CMD_ADDR’
1104 | dma_addr_t end, addr = CMD_ADDR(cmd);
| ^~~~~~~~
../../hw/arm/smmuv3.c:1104:21: note: shadowed declaration is here
1104 | dma_addr_t end, addr = CMD_ADDR(cmd);
| ^~~~
so convert it too.
CD_TTB has neither problem, but it is the only other macro in
the file that uses this pattern, so we convert it also for
consistency's sake.
We use extract64() rather than extract32() to avoid having
to explicitly cast the result to uint64_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230922152944.3583438-5-peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Avoid shadowing a variable in smmuv3_notify_iova():
../../hw/arm/smmuv3.c: In function ‘smmuv3_notify_iova’:
../../hw/arm/smmuv3.c:1043:23: warning: declaration of ‘event’ shadows a previous local [-Wshadow=local]
1043 | SMMUEventInfo event = {.inval_ste_allowed = true};
| ^~~~~
../../hw/arm/smmuv3.c:1038:19: note: shadowed declaration is here
1038 | IOMMUTLBEvent event;
| ^~~~~
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230922152944.3583438-4-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Avoid shadowing a local variable in arm_sysctl_write():
../../hw/misc/arm_sysctl.c: In function ‘arm_sysctl_write’:
../../hw/misc/arm_sysctl.c:537:26: warning: declaration of ‘val’ shadows a parameter [-Wshadow=local]
537 | uint32_t val;
| ^~~
../../hw/misc/arm_sysctl.c:388:39: note: shadowed declaration is here
388 | uint64_t val, unsigned size)
| ~~~~~~~~~^~~
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230922152944.3583438-3-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Avoid shadowing a local variable in do_process_its_cmd():
../../hw/intc/arm_gicv3_its.c:548:17: warning: declaration of ‘ite’ shadows a previous local [-Wshadow=compatible-local]
548 | ITEntry ite = {};
| ^~~
../../hw/intc/arm_gicv3_its.c:518:13: note: shadowed declaration is here
518 | ITEntry ite;
| ^~~
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230922152944.3583438-2-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename SysBusDevice variable to avoid this warning :
../hw/ppc/spapr_pci.c: In function ‘spapr_phb_realize’:
../hw/ppc/spapr_pci.c:1872:24: warning: declaration of ‘s’ shadows a previous local [-Wshadow=local]
1872 | SpaprPhbState *s;
| ^
../hw/ppc/spapr_pci.c:1829:19: note: shadowed declaration is here
1829 | SysBusDevice *s = SYS_BUS_DEVICE(dev);
| ^
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-8-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove extra 'drc_index' variable to avoid this warning :
../hw/ppc/spapr_drc.c: In function ‘rtas_ibm_configure_connector’:
../hw/ppc/spapr_drc.c:1240:26: warning: declaration of ‘drc_index’ shadows a previous local [-Wshadow=compatible-local]
1240 | uint32_t drc_index = spapr_drc_index(drc);
| ^~~~~~~~~
../hw/ppc/spapr_drc.c:1155:14: note: shadowed declaration is here
1155 | uint32_t drc_index;
| ^~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-7-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove extra 'i' variable to fix this warning :
../hw/ppc/spapr.c: In function ‘spapr_init_cpus’:
../hw/ppc/spapr.c:2668:13: warning: declaration of ‘i’ shadows a previous local [-Wshadow=compatible-local]
2668 | int i;
| ^
../hw/ppc/spapr.c:2645:9: note: shadowed declaration is here
2645 | int i;
| ^
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-5-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Introduce a helper routine defining one CPU device node to fix this
warning :
../hw/ppc/spapr.c: In function ‘spapr_dt_cpus’:
../hw/ppc/spapr.c:812:19: warning: declaration of ‘cs’ shadows a previous local [-Wshadow=compatible-local]
812 | CPUState *cs = rev[i];
| ^~
../hw/ppc/spapr.c:786:15: note: shadowed declaration is here
786 | CPUState *cs;
| ^~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-4-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
hw/intc/openpic.c: In function ‘openpic_gbl_write’:
hw/intc/openpic.c:614:17: warning: declaration of ‘idx’ shadows a previous local [-Wshadow=compatible-local]
614 | int idx;
| ^~~
hw/intc/openpic.c:568:9: note: shadowed declaration is here
568 | int idx;
| ^~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904162824.85385-3-philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
hw/nios2/10m50_devboard.c: In function ‘nios2_10m50_ghrd_init’:
hw/nios2/10m50_devboard.c:101:22: warning: declaration of ‘dev’ shadows a previous local [-Wshadow=compatible-local]
101 | DeviceState *dev = qdev_new(TYPE_NIOS2_VIC);
| ^~~
hw/nios2/10m50_devboard.c:60:18: note: shadowed declaration is here
60 | DeviceState *dev;
| ^~~
hw/nios2/10m50_devboard.c:110:18: warning: declaration of ‘i’ shadows a previous local [-Wshadow=compatible-local]
110 | for (int i = 0; i < 32; i++) {
| ^
hw/nios2/10m50_devboard.c:67:9: note: shadowed declaration is here
67 | int i;
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-15-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
hw/m68k/virt.c:263:13: error: declaration shadows a local variable [-Werror,-Wshadow]
BOOTINFOSTR(param_ptr, BI_COMMAND_LINE,
^
hw/m68k/bootinfo.h:47:13: note: expanded from macro 'BOOTINFOSTR'
int i; \
^
hw/m68k/virt.c:130:9: note: previous declaration is here
int i;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-13-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
hw/arm/allwinner-r40.c:412:14: error: declaration shadows a local variable [-Werror,-Wshadow]
for (int i = 0; i < AW_R40_NUM_MMCS; i++) {
^
hw/arm/allwinner-r40.c:299:14: note: previous declaration is here
unsigned i;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230904161235.84651-10-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
hw/arm/virt.c:821:22: error: declaration shadows a local variable [-Werror,-Wshadow]
qemu_irq irq = qdev_get_gpio_in(vms->gic,
^
hw/arm/virt.c:803:13: note: previous declaration is here
int irq;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230904161235.84651-9-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We are doing things like
nb_sectors /= (s->qdev.blocksize / BDRV_SECTOR_SIZE);
in the code here (e.g. in scsi_disk_emulate_mode_sense()), so if
the blocksize is smaller than BDRV_SECTOR_SIZE (=512), this crashes
with a division by 0 exception. Thus disallow block sizes of 256
bytes to avoid this situation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1813
CVE: 2023-42467
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230925091854.49198-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are the last users of the 128K SeaBIOS blob in the i440FX family.
Removing them allows us to drop PCI support from the 128K blob,
thus making it easier to update SeaBIOS to newer versions.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Make keyutils independent from keyring in meson.build
* Simplify the NIC init code of the jazz machine a little bit
* Minor qtest and avocado fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmURS8gRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVn4A/+NQKFZcN7gVn5JXkK7kf6i01LNmAoqjj9
# QeQL+WCoNC68OApw7DxIEnpBYT0G42NTHHx4SYeOvzJUzCpeWcxYzQUz58ObZML7
# +OKsiOsaHu3/qOuihBCn43et6moLdDCWbee5Zr6JQv/Fjn3q3nEQZnJDWdw8vm1v
# csYQJZOD6HelLVMmbLfl1szzrykDTT53NhPncH/SjPz6we17sKqHqmT6LBUIsXcV
# u2LaowppKmT7Ooexu6SmsCagLhtWuYo1iGGcRqoojtRWo7eZtWLrAy2DJpyFkPBW
# AIYBfntRISZv4eBGCxcVfvODD/Q4OXHuYTfGzD3m+ELJ6hUk/+d4/aHJ2hm+KEm+
# AD0IpDtimaEmyQTPlaWHhhEur/82JZ+zYlxUMPf3+hglB/rbr6fhA0SMAV6nwR0r
# N8jnB8UCml9oDxJVvDZyrcPMGFs1xlr5FVSHHEoL338SvSfjG3NOEtcNao9n6A8d
# rO2CfPzI7peQhKWAzJL+qpnmenyIniH23tFnf2mpOZ0g45ZWtJeT0CXL3aQO3XAZ
# m56pkM0d/etAHHRoLQ5D/iKZpwiTRLjdzsJ0gMAQsIuRlG/j5h+zou0vUMgm6F8F
# igRHLxytlywZBTCABm2XIlKmaJp8hQlVQMpKsv/BwzTvzzk0GGS5d1qzzFt5WWR7
# 4rSalTn5Xuw=
# =FioB
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Sep 2023 04:58:48 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-09-25' of https://gitlab.com/thuth/qemu:
tests/avocado: fix waiting for vm shutdown in replay_linux
hw/mips/jazz: Simplify the NIC setup code
hw/mips/jazz: Move the NIC init code into a separate function
tests/qtest/netdev-socket: Do not test multicast on Darwin
tests/qtest/m48t59-test: Silence compiler warning with -Wshadow
tests/qtest/netdev-socket: Raise connection timeout to 120 seconds
meson.build: Make keyutils independent from keyring
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The for-loop does not make much sense here - it is always left after
the first iteration, so we can also check for nb_nics == 1 instead
which is way easier to understand.
Also, the checks for nd->model are superfluous since the code in
mips_jazz_init_net() calls qemu_check_nic_model() that already
takes care of this (i.e. initializing nd->model if it has not been
set yet, and checking whether it is the "help" option or the
supported NIC model).
Message-ID: <20230913160922.355640-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The mips_jazz_init() function is already quite big, so moving
away some code here can help to make it more understandable.
Additionally, by moving this code into a separate function, the
next patch (that will refactor the for-loop around the NIC init
code) will be much shorter and easier to understand.
Message-ID: <20230913160922.355640-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Block layer patches
- Graph locking part 4 (node management)
- qemu-img map: report compressed data blocks
- block-backend: process I/O in the current AioContext
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmULHnURHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9aB5hAAqH8To7WIUtg1rj1PY809ck78ghm18PKg
# TNdN7IbrXQghX5foh2VgPwVVl+JaW2CSrJYWQcAO6AbvFduNIi9iKzI6RT0xKXpb
# b8oQXS7zntFzwBv8ohOU5NSVJOgVmNP4h5qJIMmXgB9ZcLFG40zggVH2qQT7guUf
# 9MAc81kI/d5vvSHY0ZjdHjNOgwG4q1j8yytL7OFqWUfB8sXloUCA9lT7w4jIYD8L
# v2StUOLWB01Zts2o8SCNaFxuajs6wUee8b/DM1cyPyLy4KtOdXvLKhq2NlXpLo2i
# aZFr4PtizTVwrQZIJttA9jqM+QCsDOsiSat3BLNNsKUaCWHZB0rOGLCzMCtisyOo
# 4PzuL4UI21ik2zieO1qVM+Thqvw16kHtp6dD9pGk4X4ogGreGYEIxzBl79luR+AV
# NCRizoeFWTHKymS1tSoKrWT9ZNHcLmwemO6Tt1rMYk9jV3T4uY5e1NwxaUavEfsX
# f8dLfQjhNiySOoDknT1OSerBOVdTXURS2ri5H3GZxrxvJ4jOeFkn52C8r3YlZ3Wp
# Cr9LCUJZeXgwY+Q1JQ3D4VLY8aZ83txpw6XKEy0eTEv5wxkBj5LWhXx7hNb5F3lg
# bqaRYijVJn+P82wVxlftIzMfNeVBFHzFE90taPV5grJjr8lgrGBFmD7Puc97kfDX
# oTDBwRxJeew=
# =qTNA
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Sep 2023 12:31:49 EDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (28 commits)
block: mark aio_poll as non-coroutine
block-backend: process zoned requests in the current AioContext
block-backend: process I/O in the current AioContext
test-bdrv-drain: avoid race with BH in IOThread drain test
block: remove AIOCBInfo->get_aio_context()
qemu-img: map: report compressed data blocks
block: add BDRV_BLOCK_COMPRESSED flag for bdrv_block_status()
block: Mark bdrv_add/del_child() and caller GRAPH_WRLOCK
block: Mark bdrv_unref_child() GRAPH_WRLOCK
block: Mark bdrv_root_unref_child() GRAPH_WRLOCK
block: Take graph rdlock in bdrv_change_aio_context()
block: Take graph rdlock in bdrv_drop_intermediate()
block: Mark bdrv_parent_cb_change_media() GRAPH_RDLOCK
block: Mark bdrv_child_perm() GRAPH_RDLOCK
block: Mark bdrv_get_cumulative_perm() and callers GRAPH_RDLOCK
block: Mark bdrv_parent_perms_conflict() and callers GRAPH_RDLOCK
block: Mark bdrv_attach_child() GRAPH_WRLOCK
block: Call transaction callbacks with lock held
block: Mark bdrv_attach_child_common() GRAPH_WRLOCK
block: Mark bdrv_replace_child_tran() GRAPH_WRLOCK
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Block patches
- Fix for file-posix's zoning code crashing on I/O errors
- Throttling refactoring
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmTxnMISHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfYkUP+gMG9hhzvgjj/tw9rEBQjciihzcQmqQJ
# 2Mm37RH2jj5bnnTdaTbMkcRRwVhncYSCwK9q5EYVbZmU9C/v4YJmsSEQlcl7wVou
# hbPUv6NHaBrJZX9nxNSa2RHui6pZMLKa/D0rJVB7NjYBrrRtiPo7kiLVQYjYXa2g
# kcCCfY4t3Z2RxOP31mMXRjYlhJE9bIuZdTEndrKme8KS2JGPZEJ9xjkoW1tj96EX
# oc/Cg2vk7AEtsFYA0bcD8fTFkBDJEwyYl3usu7Tk24pvH16jk7wFSqRVSsDMfnER
# tG8X3mHLIY0hbSkpzdHJdXINvZ6FWpQb0CGzIKr+pMiuWVdWr1HglBr0m4pVF+Y4
# A6AI6VX2JJgtacypoDyCZC9mzs1jIdeiwq9v5dyuikJ6ivTwEEoeoSLnLTN3AjXn
# 0mtQYzgCg5Gd6+rTo7XjSO9SSlbaVrDl/B2eXle6tmIFT5k+86fh0hc+zTmP8Rkw
# Knbc+5Le95wlMrOUNx2GhXrTGwX510hLxKboho/LITxtAzqvXnEJKrYbnkm3WPnw
# wfHnR5VQH1NKEpiH/p33og6OV/vu9e7vgp0ZNZV136SnzC90C1zMUwg2simJW701
# 34EtN0XBX8XBKrxfe7KscV9kRE8wrWWJVbhp+WOcQEomGI8uraxzWqDIk/v7NZXv
# m4XBscaB+Iri
# =oKgk
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Sep 2023 04:11:46 EDT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2023-09-01' of https://gitlab.com/hreitz/qemu:
tests/file-io-error: New test
file-posix: Simplify raw_co_prw's 'out' zone code
file-posix: Fix zone update in I/O error path
file-posix: Check bs->bl.zoned for zone info
file-posix: Clear bs->bl.zoned on error
block/throttle-groups: Use ThrottleDirection instread of bool is_write
fsdev: Use ThrottleDirection instread of bool is_write
throttle: use THROTTLE_MAX/ARRAY_SIZE for hard code
throttle: use enum ThrottleDirection instead of bool is_write
cryptodev: use NULL throttle timer cb for read direction
test-throttle: test read only and write only
throttle: support read-only and write-only
test-throttle: use enum ThrottleDirection
throttle: introduce enum ThrottleDirection
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
According to ACPI spec 6.5 5.2.28.4 System Locality Latency and Bandwidth
Information Structure, if the "Entry Base Unit" is 1024 for BW and the
matrix entry has the value of 100, the BW is 100 GB/s. So the
entry_base_unit should be changed from 1000 to 1024 given the comment notes
it's 16GB/s for .latency_bandwidth.
Fixes: 882877fc35 ("hw/pci-bridge/cxl-upstream: Add a CDAT table access DOE")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
- The comment is incorrectly indented / formatted.
- The comment states a 8MB limit, even though the code enforces a 16MB
limit.
Both of these warts come from commit 0657c657eb ("hw/i386/pc: add max
combined fw size as machine configuration option", 2020-12-09); clean them
up.
Arguably, it's also better to be consistent with the binary units (such as
"MiB") that QEMU uses nowadays.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:PC)
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> (supporter:PC)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86 TCG CPUs)
Cc: Richard Henderson <richard.henderson@linaro.org> (maintainer:X86 TCG CPUs)
Cc: Eduardo Habkost <eduardo@habkost.net> (maintainer:X86 TCG CPUs)
Cc: qemu-trivial@nongnu.org
Fixes: 0657c657eb
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Block-TLB support and linux-user fixes for hppa target
All 32-bit hppa CPUs allow a fixed number of TLB entries to have a
different page size than the default 4k.
Those are called "Block-TLBs" and are created at startup by the
operating system and managed by the firmware of hppa machines
through the firmware PDC_BLOCK_TLB call.
This patchset adds the necessary glue to SeaBIOS-hppa and
qemu to allow up to 16 BTLB entries in the emulation.
Two patches from Mikulas Patocka fix signal delivery issues
in linux-user on hppa.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZQnz0wAKCRD3ErUQojoP
# X6NDAP9F1Huhceot8peohGodRDOhnXWfDcjQZSDvadieKv/rJQEA60Z5QV5VlQgw
# SyUT4AcoiB7N4nvS+iDa+6dKfRH/YQM=
# =kqqt
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Sep 2023 15:17:39 EDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-btlb-pull-request' of https://github.com/hdeller/qemu-hppa:
linux-user/hppa: lock both words of function descriptor
linux-user/hppa: clear the PSW 'N' bit when delivering signals
target/hppa: Wire up diag instruction to support BTLB
target/hppa: Extract diagnose immediate value
target/hppa: Add BTLB support to hppa TLB functions
target/hppa: Report and clear BTLBs via fw_cfg at startup
target/hppa: Allow up to 16 BTLB entries
target/hppa: Update to SeaBIOS-hppa version 9
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The synchronous bdrv_aio_cancel() function needs the acb's AioContext so
it can call aio_poll() to wait for cancellation.
It turns out that all users run under the BQL in the main AioContext, so
this callback is not needed.
Remove the callback, mark bdrv_aio_cancel() GLOBAL_STATE_CODE just like
its blk_aio_cancel() caller, and poll the main loop AioContext.
The purpose of this cleanup is to identify bdrv_aio_cancel() as an API
that does not work with the multi-queue block layer.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230912231037.826804-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
