A memory page poisoned from the hypervisor level is no longer readable.
The migration of a VM will crash Qemu when it tries to read the
memory address space and stumbles on the poisoned page with a similar
stack trace:
Program terminated with signal SIGBUS, Bus error.
To avoid this VM crash during the migration, prevent the migration
when a known hardware poison exists on the VM.
Signed-off-by: William Roche <william.roche@oracle.com>
Link: https://lore.kernel.org/r/20240130190640.139364-2-william.roche@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit 06152b89db)
References: XXX
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
nvme_sriov_pre_write_ctrl() used to directly inspect SR-IOV
configurations to know the number of VFs being disabled due to SR-IOV
configuration writes, but the logic was flawed and resulted in
out-of-bound memory access.
It assumed PCI_SRIOV_NUM_VF always has the number of currently enabled
VFs, but it actually doesn't in the following cases:
- PCI_SRIOV_NUM_VF has been set but PCI_SRIOV_CTRL_VFE has never been.
- PCI_SRIOV_NUM_VF was written after PCI_SRIOV_CTRL_VFE was set.
- VFs were only partially enabled because of realization failure.
It is a responsibility of pcie_sriov to interpret SR-IOV configurations
and pcie_sriov does it correctly, so use pcie_sriov_num_vfs(), which it
provides, to get the number of enabled VFs before and after SR-IOV
configuration writes.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2024-26328
Fixes: 11871f53ef ("hw/nvme: Add support for the Virtualization Management command")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-1-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 91bb64a8d2)
References: bsc#1220065
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Update to latest stable release (8.2.2).
Full changelog here:
https://lore.kernel.org/qemu-devel/1709577077.783602.1474596.nullmailer@tls.msk.ru/
Upstream backports:
chardev/char-socket: Fix TLS io channels sending too much data to the backend
tests/unit/test-util-sockets: Remove temporary file after test
hw/usb/bus.c: PCAP adding 0xA in Windows version
hw/intc/Kconfig: Fix GIC settings when using "--without-default-devices"
gitlab: force allow use of pip in Cirrus jobs
tests/vm: avoid re-building the VM images all the time
tests/vm: update openbsd image to 7.4
target/i386: leave the A20 bit set in the final NPT walk
target/i386: remove unnecessary/wrong application of the A20 mask
target/i386: Fix physical address truncation
target/i386: check validity of VMCB addresses
target/i386: mask high bits of CR3 in 32-bit mode
pl031: Update last RTCLR value on write in case it's read back
hw/nvme: fix invalid endian conversion
update edk2 binaries to edk2-stable202402
update edk2 submodule to edk2-stable202402
target/ppc: Fix crash on machine check caused by ifetch
target/ppc: Fix lxv/stxv MSR facility check
.gitlab-ci.d/windows.yml: Drop msys2-32bit job
system/vl: Update description for input grab key
docs/system: Update description for input grab key
hw/hppa/Kconfig: Fix building with "configure --without-default-devices"
tests/qtest: Depend on dbus_display1_dep
meson: Explicitly specify dbus-display1.h dependency
audio: Depend on dbus_display1_dep
ui/console: Fix console resize with placeholder surface
ui/clipboard: add asserts for update and request
ui/clipboard: mark type as not available when there is no data
ui: reject extended clipboard message if not activated
target/i386: Generate an illegal opcode exception on cmp instructions with lock prefix
i386/cpuid: Move leaf 7 to correct group
i386/cpuid: Decrease cpuid_i when skipping CPUID leaf 1F
i386/cpu: Mask with XCR0/XSS mask for FEAT_XSAVE_XCR0_HI and FEAT_XSAVE_XSS_HI leafs
i386/cpu: Clear FEAT_XSAVE_XSS_LO/HI leafs when CPUID_EXT_XSAVE is not available
.gitlab-ci/windows.yml: Don't install libusb or spice packages on 32-bit
iotests: Make 144 deterministic again
target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU
target/arm: Fix SVE/SME gross MTE suppression checks
target/arm: Handle mte in do_ldrq, do_ldro
target/arm: Split out make_svemte_desc
target/arm: Adjust and validate mtedesc sizem1
target/arm: Fix nregs computation in do_{ld,st}_zpa
linux-user/aarch64: Choose SYNC as the preferred MTE mode
tests/acpi: Update DSDT.cxl to reflect change _STA return value.
hw/i386: Fix _STA return value for ACPI0017
tests/acpi: Allow update of DSDT.cxl
smmu: Clear SMMUPciBus pointer cache when system reset
virtio_iommu: Clear IOMMUPciBus pointer cache when system reset
virtio-gpu: Correct virgl_renderer_resource_get_info() error check
hw/cxl: Pass CXLComponentState to cache_mem_ops
hw/cxl/device: read from register values in mdev_reg_read()
cxl/cdat: Fix header sum value in CDAT checksum
cxl/cdat: Handle cdat table build errors
vhost-user.rst: Fix vring address description
tcg/arm: Fix goto_tb for large translation blocks
tcg: Increase width of temp_subindex
hw/net/tulip: add chip status register values
hw/smbios: Fix port connector option validation
hw/smbios: Fix OEM strings table option validation
configure: run plugin TCG tests again
tests/docker: Add sqlite3 module to openSUSE Leap container
hw/riscv/virt-acpi-build.c: fix leak in build_rhct()
migration: Fix logic of channels and transport compatibility check
virtio-blk: avoid using ioeventfd state in irqfd conditional
virtio: Re-enable notifications after drain
virtio-scsi: Attach event vq notifier with no_poll
iotests: give tempdir an identifying name
iotests: fix leak of tmpdir in dry-run mode
hw/scsi/lsi53c895a: add missing decrement of reentrancy counter
linux-user/aarch64: Add padding before __kernel_rt_sigreturn
tcg/loongarch64: Set vector registers call clobbered
pci-host: designware: Limit value range of iATU viewport register
target/arm: Reinstate "vfp" property on AArch32 CPUs
qemu-options.hx: Improve -serial option documentation
system/vl.c: Fix handling of '-serial none -serial something'
target/arm: fix exception syndrome for AArch32 bkpt insn
block/blkio: Make s->mem_region_alignment be 64 bits
qemu-docs: Update options for graphical frontends
Make 'uri' optional for migrate QAPI
vfio/pci: Clear MSI-X IRQ index always
migration: Fix use-after-free of migration state object
migration: Plug memory leak on HMP migrate error path
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
spapr_irq_init currently uses existing macro SPAPR_XIRQ_BASE to refer to
the range of CPU IPIs during initialization of nr-irqs property.
It is more appropriate to have its own define which can be further
reused as appropriate for correct interpretation.
Suggested-by: Cedric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Kowshik Jois <kowsjois@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit 2df5c1f5b0)
References: bsc#1220310
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
We wanted QEMU to support larger VMs (in therm of RAM size) by default
and we therefore introduced patch "[openSUSE] increase x86_64 physical
bits to 42". This, however, means that we create VMs with 42 bits of
physical address space even on hosts that only has, say, 40. And that
can't work.
In fact, it has been a problem since a long time (e.g., bsc#1205978) and
it's also the actual root cause of bsc#1219977.
Get rid of that old patch, in favor of a new one that still raise the
default number of address bits to 42, but only on hosts that supports
that.
This means that we can also use the proper SeaBIOS version, without
reverting commits that were only a problem due to our broken downstream
patch.
We probably aslo don't need to ship some of the custom ACPI tables (for
passing tests), but we'll actually remove them later, after double
checking properly that all the tests do work.
References: bsc#1205978
References: bsc#1219977
References: bsc#1220799
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Update the copyright year to 2024, sort dependencies etc.
This way, 'osc' does not have to do these changes all the times (they're
automatic, so no big deal, but it's annoying to see them in the diffs of
all the requests).
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Backported commits:
* Update version for 8.2.1 release
* target/arm: Fix incorrect aa64_tidcp1 feature check
* target/arm: Fix A64 scalar SQSHRN and SQRSHRN
* target/xtensa: fix OOB TLB entry access
* qtest: bump aspeed_smc-test timeout to 6 minutes
* monitor: only run coroutine commands in qemu_aio_context
* iotests: port 141 to Python for reliable QMP testing
* iotests: add filter_qmp_generated_node_ids()
* block/blklogwrites: Fix a bug when logging "write zeroes" operations.
* virtio-net: correctly copy vnet header when flushing TX (bsc#1218484, CVE-2023-6693)
* tcg/arm: Fix SIGILL in tcg_out_qemu_st_direct
* linux-user/riscv: Adjust vdso signal frame cfa offsets
* linux-user: Fixed cpu restore with pc 0 on SIGBUS
* block/io: clear BDRV_BLOCK_RECURSE flag after recursing in bdrv_co_block_status
* coroutine-ucontext: Save fake stack for pooled coroutine
* tcg/s390x: Fix encoding of VRIc, VRSa, VRSc insns
* accel/tcg: Revert mapping of PCREL translation block to multiple virtual addresses
* acpi/tests/avocado/bits: wait for 200 seconds for SHUTDOWN event from bits VM
* s390x/pci: drive ISM reset from subsystem reset
* s390x/pci: refresh fh before disabling aif
* s390x/pci: avoid double enable/disable of aif
* hw/scsi/esp-pci: set DMA_STAT_BCMBLT when BLAST command issued
* hw/scsi/esp-pci: synchronise setting of DMA_STAT_DONE with ESP completion interrupt
* hw/scsi/esp-pci: generate PCI interrupt from separate ESP and PCI sources
* hw/scsi/esp-pci: use correct address register for PCI DMA transfers
* migration/rdma: define htonll/ntohll only if not predefined
* hw/pflash: implement update buffer for block writes
* hw/pflash: use ldn_{be,le}_p and stn_{be,le}_p
* hw/pflash: refactor pflash_data_write()
* backends/cryptodev: Do not ignore throttle/backends Errors
* target/i386: pcrel: store low bits of physical address in data[0]
* target/i386: fix incorrect EIP in PC-relative translation blocks
* target/i386: Do not re-compute new pc with CF_PCREL
* load_elf: fix iterator's type for elf file processing
* target/hppa: Update SeaBIOS-hppa to version 15
* target/hppa: Fix IOR and ISR on error in probe
* target/hppa: Fix IOR and ISR on unaligned access trap
* target/hppa: Export function hppa_set_ior_and_isr()
* target/hppa: Avoid accessing %gr0 when raising exception
* hw/hppa: Move software power button address back into PDC
* target/hppa: Fix PDC address translation on PA2.0 with PSW.W=0
* hw/pci-host/astro: Add missing astro & elroy registers for NetBSD
* hw/hppa/machine: Disable default devices with --nodefaults option
* hw/hppa/machine: Allow up to 3840 MB total memory
* readthodocs: fully specify a build environment
* .gitlab-ci.d/buildtest.yml: Work around htags bug when environment is large
* target/s390x: Fix LAE setting a wrong access register
* tests/qtest/virtio-ccw: Fix device presence checking
* tests/acpi: disallow tests/data/acpi/virt/SSDT.memhp changes
* tests/acpi: update expected data files
* edk2: update binaries to git snapshot
* edk2: update build config, set PcdUninstallMemAttrProtocol = TRUE.
* edk2: update to git snapshot
* tests/acpi: allow tests/data/acpi/virt/SSDT.memhp changes
* util: fix build with musl libc on ppc64le
* tcg/ppc: Use new registers for LQ destination
* hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers
* hw/vfio: fix iteration over global VFIODevice list
* vfio/container: Replace basename with g_path_get_basename
* edu: fix DMA range upper bound check
* hw/net: cadence_gem: Fix MDIO_OP_xxx values
* audio/audio.c: remove trailing newline in error_setg
* chardev/char.c: fix "abstract device type" error message
* target/riscv: Fix mcycle/minstret increment behavior
* hw/net/can/sja1000: fix bug for single acceptance filter and standard frame
* target/i386: the sgx_epc_get_section stub is reachable
* configure: use a native non-cross compiler for linux-user
* include/ui/rect.h: fix qemu_rect_init() mis-assignment
* target/riscv/kvm: do not use non-portable strerrorname_np()
* iotests: Basic tests for internal snapshots
* vl: Improve error message for conflicting -incoming and -loadvm
* block: Fix crash when loading snapshot on inactive node
References: bsc#1218484 (CVE-2023-6693)
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Depending on the VM configuration (both at the VM definition level and
on the guest itself) a VGA console might be necessary, or weird lockup
will occur. Since the VGA module package is smalle enough, add a
dependency for it, from other display modules, to act as a workaround.
While there, make more explicit and precise the dependencies between all
the various modules, by specifying that they should all have the same
version and release.
References: bsc#1219164
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Historically, KVM was available only for x86 and s390, and was invoked
via a binary called 'kvm' or 'qemu-kvm'. For a while, we've shipped a
package that was making it possible to invoke QEMU like that, but only
for these two arches. This, however, created a lot of confusion and
dependencies issues.
Fix them by creating a symlink from 'qemu-kvm' to the proper binary on
all arches and by making the main QEMU package Providing and Obsoleting
(also on all arches) the old qemu-kvm one.
Note that, for RISCV, the qemu-system-riscv64 binary, to which the symlink
should point, is in the qemu-extra package. However, if we are on RISCV,
qemu-extra is an hard dependency of qemu. Therefore, it's fine to ship
the link and also set the Provides: and Obsoletes: tag in the qemu
package itself. It'd be more correct to do that in the qemu-extra
package, of course, but this would complicate the spec file and it's not
worth it, considering this is all legacy and should very well go away
soon.
References: bsc#1218684
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Add to the ipxe submodule the commit (and all its dependencies) for
fixing building with binutils 2.42
References: bsc#1219733
References: bsc#1219722
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Point the submodules to the repositories that host our downstream
patches:
* roms/seabios
- [openSUSE] switch to python3 as needed
- [openSUSE] build: enable cross compilation on ARM
- [openSUSE] build: be explicit about -mx86-used-note=no
* roms/SLOF
- Allow to override build date with SOURCE_DATE_EPOCH
* roms/ipxe
- [ath5k] Add missing AR5K_EEPROM_READ in ath5k_eeprom_read_turbo_modes
- [openSUSE] [build] Makefile: fix issues of build reproducibility
- [openSUSE] [test] help compiler out by initializing array[openSUSE]
- [openSUSE] [build] Silence GCC 12 spurious warnings
- [librm] Use explicit operand size when pushing a label address
* roms/skiboot
- [openSUSE] Makefile: define endianess for cross-building on aarch64
- [openSUSE] Make Sphinx build reproducible (boo#1102408)
* roms/qboot
- [openSUSE] add cross.ini file to handle aarch64 based build
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Update to latest upstream release.
The full list of changes are available at:
https://wiki.qemu.org/ChangeLog/8.2
Highlights include:
* New virtio-sound device emulation
* New virtio-gpu rutabaga device emulation used by Android emulator
* New hv-balloon for dynamic memory protocol device for Hyper-V guests
* New Universal Flash Storage device emulation
* Network Block Device (NBD) 64-bit offsets for improved performance
* dump-guest-memory now supports the standard kdump format
* ARM: Xilinx Versal board now models the CFU/CFI, and the TRNG device
* ARM: CPU emulation support for cortex-a710 and neoverse-n2
* ARM: architectural feature support for PACQARMA3, EPAC, Pauth2, FPAC,
FPACCOMBINE, TIDCP1, MOPS, HBC, and HPMN0
* HPPA: CPU emulation support for 64-bit PA-RISC 2.0
* HPPA: machine emulation support for C3700, including Astro memory
controller and four Elroy PCI bridges
* LoongArch: ISA support for LASX extension and PRELDX instruction
* LoongArch: CPU emulation support for la132
* RISC-V: ISA/extension support for AIA virtualization support via KVM,
and vector cryptographic instructions
* RISC-V: Numerous extension/instruction cleanups, fixes, and reworks
* s390x: support for vfio-ap passthrough of crypto adapter for
protected
virtualization guests
* Tricore: support for TC37x CPU which implements ISA v1.6.2
* Tricore: support for CRCN, FTOU, FTOHP, and HPTOF instructions
* x86: Zen support for PV console and network devices
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
In 8.2, the upstream added graph lock annotations that conflict with
our coroutine patches. The GRAPH_RDLOCK_GUARD_MAINLOOP is now asserted
at some places where we turned the code into a coroutine.
My understanding is that the annotation merely asserts that the code
is running in the main loop and serves effectively as a marker of
where the graph lock should be taken if the code were to be moved out
of the main loop. That's exactly what we're doing so it should be safe
to replace the main loop check with an actual rdlock/rdunlock pair.
Commits e7e801a2a7, 94d03a7425 and c89144c058 replace
GRAPH_RDLOCK_GUARD_MAINLOOP() with GRAPH_RDLOCK_GUARD() at the
bdrv_snapshot_list, bdrv_named_nodes_list and qmp_query_block
functions. The changes are split into those patches instead of here to
preserve bisectability.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The fstat call can take a long time to finish when running over
NFS. Add a version of it that runs in the thread pool.
Adapt one of its users, raw_co_get_allocated_file size to use the new
version. That function is called via QMP under the qemu_global_mutex
so it has a large chance of blocking VCPU threads in case it takes too
long to finish.
Signed-off-by: João Silva <jsilva@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
This is another caller of bdrv_get_allocated_file_size() that needs to
be converted to a coroutine because that function will be made
asynchronous when called (indirectly) from the QMP dispatcher.
This QMP command is a candidate because it calls bdrv_do_query_node_info(),
which in turn calls bdrv_get_allocated_file_size().
We've determined bdrv_do_query_node_info() to be coroutine-safe (see
previous commits), so we can just put this QMP command in a coroutine.
Since qmp_query_block() now expects to run in a coroutine, its callers
need to be converted as well. Convert hmp_info_block(), which calls
only coroutine-safe code, including qmp_query_named_block_nodes()
which has been converted to coroutine in the previous patches.
Now that all callers of bdrv_[co_]block_device_info() are using the
coroutine version, a few things happen:
- we can return to using bdrv_block_device_info() without a wrapper;
- bdrv_get_allocated_file_size() can stop being mixed;
- bdrv_co_get_allocated_file_size() needs to be put under the graph
lock because it is being called wthout the wrapper;
- bdrv_do_query_node_info() doesn't need to acquire the AioContext
because it doesn't call aio_poll anymore;
Signed-off-by: Fabiano Rosas <farosas@suse.de>
References: bsc#1211000
[relax main loop requirement at qmp_query_block]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We're currently doing a full query-block just to enumerate the devices
for qmp_nbd_server_add and then discarding the BlockInfoList
afterwards. Alter hmp_nbd_server_start to instead iterate explicitly
over the block_backends list.
This allows the removal of the dependency on qmp_query_block from
hmp_nbd_server_start. This is desirable because we're about to move
qmp_query_block into a coroutine and don't need to change the NBD code
at the same time.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We're converting callers of bdrv_get_allocated_file_size() to run in
coroutines because that function will be made asynchronous when called
(indirectly) from the QMP dispatcher.
This QMP command is a candidate because it indirectly calls
bdrv_get_allocated_file_size() through bdrv_block_device_info() ->
bdrv_query_image_info() -> bdrv_query_image_info().
The previous patches have determined that bdrv_query_image_info() and
bdrv_do_query_node_info() are coroutine-safe so we can just make the
QMP command run in a coroutine.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
References: bsc#1211000
[relax the main loop requirement at bdrv_named_nodes_list]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We're converting callers of bdrv_get_allocated_file_size() to run in
coroutines because that function will be made asynchronous when called
(indirectly) from the QMP dispatcher.
This function is a candidate because it calls bdrv_query_image_info()
-> bdrv_do_query_node_info() -> bdrv_get_allocated_file_size().
It is safe to turn this is a coroutine because the code it calls is
made up of either simple accessors and string manipulation functions
[1] or it has already been determined to be safe [2].
1) bdrv_refresh_filename(), bdrv_is_read_only(),
blk_enable_write_cache(), bdrv_cow_bs(), blk_get_public(),
throttle_group_get_name(), bdrv_write_threshold_get(),
bdrv_query_dirty_bitmaps(), throttle_group_get_config(),
bdrv_filter_or_cow_bs(), bdrv_skip_implicit_filters()
2) bdrv_do_query_node_info() (see previous commit);
Signed-off-by: Fabiano Rosas <farosas@suse.de>
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We're converting callers of bdrv_get_allocated_file_size() to run in
coroutines because that function will be made asynchronous when called
(indirectly) from the QMP dispatcher.
This function is a candidate because it calls bdrv_do_query_node_info(),
which in turn calls bdrv_get_allocated_file_size().
All the functions called from bdrv_do_query_node_info() onwards are
coroutine-safe, either have a coroutine version themselves[1] or are
mostly simple code/string manipulation[2].
1) bdrv_getlength(), bdrv_get_allocated_file_size(), bdrv_get_info(),
bdrv_get_specific_info();
2) bdrv_refresh_filename(), bdrv_get_format_name(),
bdrv_get_full_backing_filename(), bdrv_query_snapshot_info_list();
Signed-off-by: Fabiano Rosas <farosas@suse.de>
References: bsc#1211000
[relax the main loop requirement at bdrv_snapshot_list]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Some callers of this function are about to be converted to run in
coroutines, so allow it to be executed both inside and outside a
coroutine while we convert all the callers.
This will be reverted once all callers of bdrv_do_query_node_info run
in a coroutine.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The following patches will add co_wrapper annotations to functions
declared in qapi.h. Add that header to the set of files used by
block-coroutine-wrapper.py.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
References: bsc#1211000
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add some block drivers and virtiofsd as hard dependencies of the
qemu-headless package, to make sure it's really useful for headless
server environments (even when recommended packages are not installed).
Singed-off-by: Dario Faggioli <dfaggioli@suse.com>
Use a fixed USER value (in case someone builds outside of OBS/osc).
References: boo#1084909
Signed-off-by: Bernhard M. Wiedemann <githubbmwprimary@lsmod.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Define a new sub-(meta-)package that can be installed for having
all the other modules and packages necessary for SPICE to work.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Align to upstream stable release. It includes many of the patches we had
backported ourself, to fix bugs and issues, plus more.
See here for details:
- https://lore.kernel.org/qemu-devel/1700589639.257680.3420728.nullmailer@tls.msk.ru/
- https://gitlab.com/qemu-project/qemu/-/commits/stable-8.1?ref_type=heads
An (incomplete!) list of such backports is:
* Update version for 8.1.3 release
* hw/mips: LOONGSON3V depends on UNIMP device
* target/arm: HVC at EL3 should go to EL3, not EL2
* s390x/pci: only limit DMA aperture if vfio DMA limit reported
* target/riscv/kvm: support KVM_GET_REG_LIST
* target/riscv/kvm: improve 'init_multiext_cfg' error msg
* tracetool: avoid invalid escape in Python string
* tests/tcg/s390x: Test LAALG with negative cc_src
* target/s390x: Fix LAALG not updating cc_src
* tests/tcg/s390x: Test CLC with inaccessible second operand
* target/s390x: Fix CLC corrupting cc_src
* tests/qtest: ahci-test: add test exposing reset issue with pending callback
* hw/ide: reset: cancel async DMA operation before resetting state
* target/mips: Fix TX79 LQ/SQ opcodes
* target/mips: Fix MSA BZ/BNZ opcodes displacement
* ui/gtk-egl: apply scale factor when calculating window's dimension
* ui/gtk: force realization of drawing area
* ati-vga: Implement fallback for pixman routines
* ...
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Avoid parallel processing in sphinx because that causes variations in
generated files
This is addressed here, with a downstream patch, until a proper solution
is found upstream.
Signed-off-by: Bernhard Wiedemann <bwiedemann@suse.com>
References: boo#1102408
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Philippe Mathieu-Daudé
William Roche
Tianrui Zhao
Daniel Henrique Barboza
Akihiko Odaki
dfaggioli
Harsh Prateek Bora
Andreas_Schwab
Fabian Vogt
Fabiano Rosas
João Silva
lin_ma
Ludwig Nussel