Recently we introduced cross-binary migration test. It's always wanted
that migration-test uses stable guest ABI for both QEMU binaries in this
case, so that both QEMU binaries will be compatible on the migration
stream with the cmdline specified.
Switch to a static gic version "3" rather than using version "max", so that
GIC should be stable now across any future QEMU binaries for migration-test.
Here the version can actually be anything as long as the ABI is stable. We
choose "3" because it's the majority of what we already use in QEMU while
still new enough: "git grep gic-version=3" shows 6 hit, while version 4 has
no direct user yet besides "max".
Note that even with this change, aarch64 won't be able to work yet with
migration cross binary test, but then the only missing piece will be the
stable CPU model.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240207005403.242235-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
It is possible that one of the multifd channels fails to be created at
multifd_new_send_channel_async() while the rest of the channel
creation tasks are still in flight.
This could lead to multifd_save_cleanup() executing the
qemu_thread_join() loop too early and not waiting for the threads
which haven't been created yet, leading to the freeing of resources
that the newly created threads will try to access and crash.
Add a synchronization point after which there will be no attempts at
thread creation and therefore calling multifd_save_cleanup() past that
point will ensure it properly waits for the threads.
A note about performance: Prior to this patch, if a channel took too
long to be established, other channels could finish connecting first
and already start taking load. Now we're bounded by the
slowest-connecting channel.
Reported-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-7-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
During multifd channel creation (multifd_send_new_channel_async) when
TLS is enabled, the multifd_channel_connect function is called twice,
once to create the TLS handshake thread and another time after the
asynchrounous TLS handshake has finished.
This creates a slightly confusing call stack where
multifd_channel_connect() is called more times than the number of
channels. It also splits error handling between the two callers of
multifd_channel_connect() causing some code duplication. Lastly, it
gets in the way of having a single point to determine whether all
channel creation tasks have been initiated.
Refactor the code to move the reentrancy one level up at the
multifd_new_send_channel_async() level, de-duplicating the error
handling and allowing for the next patch to introduce a
synchronization point common to all the multifd channel creation,
regardless of TLS.
Note that the previous code would never fail once p->c had been set.
This patch changes this assumption, which affects refcounting, so add
comments around object_unref to explain the situation.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-6-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We currently have an unfavorable situation around multifd channels
creation and the migration thread execution.
We create the multifd channels with qio_channel_socket_connect_async
-> qio_task_run_in_thread, but only connect them at the
multifd_new_send_channel_async callback, called from
qio_task_complete, which is registered as a glib event.
So at multifd_send_setup() we create the channels, but they will only
be actually usable after the whole multifd_send_setup() calling stack
returns back to the main loop. Which means that the migration thread
is already up and running without any possibility for the multifd
channels to be ready on time.
We currently rely on the channels-ready semaphore blocking
multifd_send_sync_main() until channels start to come up and release
it. However there have been bugs recently found when a channel's
creation fails and multifd_send_cleanup() is allowed to run while
other channels are still being created.
Let's start to organize this situation by moving the
multifd_send_setup() call into the migration thread. That way we
unblock the main-loop to dispatch the completion callbacks and
actually have a chance of getting the multifd channels ready for when
the migration thread needs them.
The next patches will deal with the synchronization aspects.
Note that this takes multifd_send_setup() out of the BQL.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-5-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We currently only need p->running to avoid calling qemu_thread_join()
on a non existent thread if the thread has never been created.
However, there are at least two bugs in this logic:
1) On the sending side, p->running is set too early and
qemu_thread_create() can be skipped due to an error during TLS
handshake, leaving the flag set and leading to a crash when
multifd_send_cleanup() calls qemu_thread_join().
2) During exit, the multifd thread clears the flag while holding the
channel lock. The counterpart at multifd_send_cleanup() reads the flag
outside of the lock and might free the mutex while the multifd thread
still has it locked.
Fix the first issue by setting the flag right before creating the
thread. Rename it from p->running to p->thread_created to clarify its
usage.
Fix the second issue by not clearing the flag at the multifd thread
exit. We don't have any use for that.
Note that these bugs are straight-forward logic issues and not race
conditions. There is still a gap for races to affect this code due to
multifd_send_cleanup() being allowed to run concurrently with the
thread creation loop. This issue is solved in the next patches.
Cc: qemu-stable <qemu-stable@nongnu.org>
Fixes: 2964714015 ("migration/tls: add support for multifd tls-handshake")
Reported-by: Avihai Horon <avihaih@nvidia.com>
Reported-by: chenyuhui5@huawei.com
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The commit in the fixes line mistakenly modified the channels and
transport compatibility check logic so it now checks multi-channel
support only for socket transport type.
Thus, running multifd migration using a transport other than socket that
is incompatible with multi-channels (such as "exec") would lead to a
segmentation fault instead of an error message.
For example:
(qemu) migrate_set_capability multifd on
(qemu) migrate -d "exec:cat > /tmp/vm_state"
Segmentation fault (core dumped)
Fix it by checking multi-channel compatibility for all transport types.
Cc: qemu-stable <qemu-stable@nongnu.org>
Fixes: d95533e1cd ("migration: modify migration_channels_and_uri_compatible() for new QAPI syntax")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240125162528.7552-2-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
When reviewing my attempt to refactor send_prepare(), Fabiano suggested we
try out with dropping the mutex in multifd code [1].
I thought about that before but I never tried to change the code. Now
maybe it's time to give it a stab. This only optimizes the sender side.
The trick here is multifd has a clear provider/consumer model, that the
migration main thread publishes requests (either pending_job/pending_sync),
while the multifd sender threads are consumers. Here we don't have a lot
of complicated data sharing, and the jobs can logically be submitted
lockless.
Arm the code with atomic weapons. Two things worth mentioning:
- For multifd_send_pages(): we can use qatomic_load_acquire() when trying
to find a free channel, but that's expensive if we attach one ACQUIRE per
channel. Instead, keep the qatomic_read() on reading the pending_job
flag as we do already, meanwhile use one smp_mb_acquire() after the loop
to guarantee the memory ordering.
- For pending_sync: it doesn't have any extra data required since now
p->flags are never touched, it should be safe to not use memory barrier.
That's different from pending_job.
Provide rich comments for all the lockless operations to state how they are
paired. With that, we can remove the mutex.
[1] https://lore.kernel.org/r/87o7d1jlu5.fsf@suse.de
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-24-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
As reported correctly by Fabiano [1] (while per Fabiano, it sourced back to
Elena's initial report in Oct 2023), MultiFDSendParams.packet_num is buggy
to be assigned and stored. Consider two consequent operations of: (1)
queue a job into multifd send thread X, then (2) queue another sync request
to the same send thread X. Then the MultiFDSendParams.packet_num will be
assigned twice, and the first assignment can get lost already.
To avoid that, we move the packet_num assignment from p->packet_num into
where the thread will fill in the packet. Use atomic operations to protect
the field, making sure there's no race.
Note that atomic fetch_add() may not be good for scaling purposes, however
multifd should be fine as number of threads should normally not go beyond
16 threads. Let's leave that concern for later but fix the issue first.
There's also a trick on how to make it always work even on 32 bit hosts for
uint64_t packet number. Switching to uintptr_t as of now to simply the
case. It will cause packet number to overflow easier on 32 bit, but that
shouldn't be a major concern for now as 32 bit systems is not the major
audience for any performance concerns like what multifd wants to address.
We also need to move multifd_send_state definition upper, so that
multifd_send_fill_packet() can reference it.
[1] https://lore.kernel.org/r/87o7d1jlu5.fsf@suse.de
Reported-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-23-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Most of the multifd code uses send/recv to represent the two sides, but
some rare cases use save/load.
Since send/recv is the majority, replacing the save/load use cases to use
send/recv globally. Now we reach a consensus on the naming.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-22-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Shrink the function by moving relevant works into helpers: move the thread
join()s into multifd_send_terminate_threads(), then create two more helpers
to cover channel/state cleanups.
Add a TODO entry for the thread terminate process because p->running is
still buggy. We need to fix it at some point but not yet covered.
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-20-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The current multifd_queue_page() is not easy to read and follow. It is not
good with a few reasons:
- No helper at all to show what exactly does a condition mean; in short,
readability is low.
- Rely on pages->ramblock being cleared to detect an empty queue. It's
slightly an overload of the ramblock pointer, per Fabiano [1], which I
also agree.
- Contains a self recursion, even if not necessary..
Rewrite this function. We add some comments to make it even clearer on
what it does.
[1] https://lore.kernel.org/r/87wmrpjzew.fsf@suse.de
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-19-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Split multifd_send_terminate_threads() into two functions:
- multifd_send_set_error(): used when an error happened on the sender
side, set error and quit state only
- multifd_send_terminate_threads(): used only by the main thread to kick
all multifd send threads out of sleep, for the last recycling.
Use multifd_send_set_error() in the three old call sites where only the
error will be set.
Use multifd_send_terminate_threads() in the last one where the main thread
will kick the multifd threads at last in multifd_save_cleanup().
Both helpers will need to set quitting=1.
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-16-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Now multifd's logic is designed to have no spurious wakeup. I still
remember a talk to Juan and he seems to agree we should drop it now, and if
my memory was right it was there because multifd used to hit that when
still debugging.
Let's drop it and see what can explode; as long as it's not reaching
soft-freeze.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-15-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This patch redefines the interfacing of ->send_prepare(). It further
simplifies multifd_send_thread() especially on zero copy.
Now with the new interface, we require the hook to do all the work for
preparing the IOVs to send. After it's completed, the IOVs should be ready
to be dumped into the specific multifd QIOChannel later.
So now the API looks like:
p->pages -----------> send_prepare() -------------> IOVs
This also prepares for the case where the input can be extended to even not
any p->pages. But that's for later.
This patch will achieve similar goal of what Fabiano used to propose here:
https://lore.kernel.org/r/20240126221943.26628-1-farosas@suse.de
However the send() interface may not be necessary. I'm boldly attaching a
"Co-developed-by" for Fabiano.
Co-developed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-14-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Introduce a helper multifd_send_prepare_header() to setup the header packet
for multifd sender.
It's fine to setup the IOV[0] _before_ send_prepare() because the packet
buffer is already ready, even if the content is to be filled in.
With this helper, we can already slightly clean up the zero copy path.
Note that I explicitly put it into multifd.h, because I want it inlined
directly into multifd*.c where necessary later.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-13-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This field, no matter whether on src or dest, is only used for debugging
purpose.
They can even be removed already, unless it still more or less provide some
accounting on "how many packets are sent/recved for this thread". The
other more important one is called packet_num, which is embeded in the
multifd packet headers (MultiFDPacket_t).
So let's keep them for now, but make them much easier to understand, by
doing below:
- Rename both of them to packets_sent / packets_recved, the old
name (num_packets) are waaay too confusing when we already have
MultiFDPacket_t.packets_num.
- Avoid worrying on the "initial packet": we know we will send it, that's
good enough. The accounting won't matter a great deal to start with 0 or
with 1.
- Move them to where we send/recv the packets. They're:
- multifd_send_fill_packet() for senders.
- multifd_recv_unfill_packet() for receivers.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-10-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The sender thread will yield the p->mutex before IO starts, trying to not
block the requester thread. This may be unnecessary lock optimizations,
because the requester can already read pending_job safely even without the
lock, because the requester is currently the only one who can assign a
task.
Drop that lock complication on both sides:
(1) in the sender thread, always take the mutex until job done
(2) in the requester thread, check pending_job clear lockless
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Multifd provide a threaded model for processing jobs. On sender side,
there can be two kinds of job: (1) a list of pages to send, or (2) a sync
request.
The sync request is a very special kind of job. It never contains a page
array, but only a multifd packet telling the dest side to synchronize with
sent pages.
Before this patch, both requests use the pending_job field, no matter what
the request is, it will boost pending_job, while multifd sender thread will
decrement it after it finishes one job.
However this should be racy, because SYNC is special in that it needs to
set p->flags with MULTIFD_FLAG_SYNC, showing that this is a sync request.
Consider a sequence of operations where:
- migration thread enqueue a job to send some pages, pending_job++ (0->1)
- [...before the selected multifd sender thread wakes up...]
- migration thread enqueue another job to sync, pending_job++ (1->2),
setup p->flags=MULTIFD_FLAG_SYNC
- multifd sender thread wakes up, found pending_job==2
- send the 1st packet with MULTIFD_FLAG_SYNC and list of pages
- send the 2nd packet with flags==0 and no pages
This is not expected, because MULTIFD_FLAG_SYNC should hopefully be done
after all the pages are received. Meanwhile, the 2nd packet will be
completely useless, which contains zero information.
I didn't verify above, but I think this issue is still benign in that at
least on the recv side we always receive pages before handling
MULTIFD_FLAG_SYNC. However that's not always guaranteed and just tricky.
One other reason I want to separate it is using p->flags to communicate
between the two threads is also not clearly defined, it's very hard to read
and understand why accessing p->flags is always safe; see the current impl
of multifd_send_thread() where we tried to cache only p->flags. It doesn't
need to be that complicated.
This patch introduces pending_sync, a separate flag just to show that the
requester needs a sync. Alongside, we remove the tricky caching of
p->flags now because after this patch p->flags should only be used by
multifd sender thread now, which will be crystal clear. So it is always
thread safe to access p->flags.
With that, we can also safely convert the pending_job into a boolean,
because we don't support >1 pending jobs anyway.
Always use atomic ops to access both flags to make sure no cache effect.
When at it, drop the initial setting of "pending_job = 0" because it's
always allocated using g_new0().
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-7-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This array is redundant when p->pages exists. Now we extended the life of
p->pages to the whole period where pending_job is set, it should be safe to
always use p->pages->offset[] rather than p->normal[]. Drop the array.
Alongside, the normal_num is also redundant, which is the same to
p->pages->num.
This doesn't apply to recv side, because there's no extra buffering on recv
side, so p->normal[] array is still needed.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Now we reset MultiFDPages_t object in the multifd sender thread in the
middle of the sending job. That's not necessary, because the "*pages"
struct will not be reused anyway until pending_job is cleared.
Move that to the end after the job is completed, provide a helper to reset
a "*pages" object. Use that same helper when free the object too.
This prepares us to keep using p->pages in the follow up patches, where we
may drop p->normal[].
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Multifd send side has two fields to indicate error quits:
- MultiFDSendParams.quit
- &multifd_send_state->exiting
Merge them into the global one. The replacement is done by changing all
p->quit checks into the global var check. The global check doesn't need
any lock.
A few more things done on top of this altogether:
- multifd_send_terminate_threads()
Moving the xchg() of &multifd_send_state->exiting upper, so as to cover
the tracepoint, migrate_set_error() and migrate_set_state().
- multifd_send_sync_main()
In the 2nd loop, add one more check over the global var to make sure we
don't keep the looping if QEMU already decided to quit.
- multifd_tls_outgoing_handshake()
Use multifd_send_terminate_threads() to set the error state. That has
a benefit of updating MigrationState.error to that error too, so we can
persist that 1st error we hit in that specific channel.
- multifd_new_send_channel_async()
Take similar approach like above, drop the migrate_set_error() because
multifd_send_terminate_threads() already covers that. Unwrap the helper
multifd_new_send_channel_cleanup() along the way; not really needed.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
A memory page poisoned from the hypervisor level is no longer readable.
The migration of a VM will crash Qemu when it tries to read the
memory address space and stumbles on the poisoned page with a similar
stack trace:
Program terminated with signal SIGBUS, Bus error.
#0 _mm256_loadu_si256
#1 buffer_zero_avx2
#2 select_accel_fn
#3 buffer_is_zero
#4 save_zero_page
#5 ram_save_target_page_legacy
#6 ram_save_host_page
#7 ram_find_and_save_block
#8 ram_save_iterate
#9 qemu_savevm_state_iterate
#10 migration_iteration_run
#11 migration_thread
#12 qemu_thread_start
To avoid this VM crash during the migration, prevent the migration
when a known hardware poison exists on the VM.
Signed-off-by: William Roche <william.roche@oracle.com>
Link: https://lore.kernel.org/r/20240130190640.139364-2-william.roche@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Documentation of commands guest-ssh-get-authorized-keys,
guest-ssh-add-authorized-keys, and guest-ssh-remove-authorized-keys
describes the command's purpose after its arguments. Everywhere else,
we do it the other way round. Move it for consistency.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-6-armbru@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Documentation of type BlockdevOptionsIscsi describes the type's
purpose after its members. Everywhere else, we do it the other way
round. Move it for consistency.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-5-armbru@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Documentation of BlockExportRemoveMode has
Potential additional modes to be added in the future:
hide: Just hide export from new clients, leave existing connections
as is. Remove export after all clients are disconnected.
soft: Hide export from new clients, answer with ESHUTDOWN for all
further requests from existing clients.
I think this is useful only for developers. Elide it from generated
documentation by turning it into a TODO section.
This effectively reverts my own commit b71fd73cc4 (Revert "qapi:
BlockExportRemoveMode: move comments to TODO"). At the time, I was
about to elide TODO sections from the generated manual, I wasn't sure
about this one, and decided to avoid change. And now I've made up my
mind.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Documentation generated for dump-skeys contains
This command is only supported on s390 architecture.
and
If
~~
"TARGET_S390X"
The former became redundant in commit 901a34a400 (qapi: add 'If:'
section to generated documentation) added the latter. Drop the
former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Documentation generated for SchemaInfo looks like
The members of "SchemaInfoBuiltin" when "meta-type" is ""builtin""
The members of "SchemaInfoEnum" when "meta-type" is ""enum""
The members of "SchemaInfoArray" when "meta-type" is ""array""
The members of "SchemaInfoObject" when "meta-type" is ""object""
The members of "SchemaInfoAlternate" when "meta-type" is ""alternate""
The members of "SchemaInfoCommand" when "meta-type" is ""command""
The members of "SchemaInfoEvent" when "meta-type" is ""event""
Additional members depend on the value of "meta-type".
The last line became redundant when commit 88f63467c5 (qapi2texi:
Generate reference to base type members) added the lines preceding it.
Drop it.
BlockdevOptions has the same issue. Drop
Remaining options are determined by the block driver.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If an exception is to be raised, the destination fp register
should be unmodified. The current implementation is incorrect,
in that double results will be written back before calling
gen_helper_check_ieee_exceptions, despite the placement of
gen_store_fpr_D, since gen_dest_fpr_D returns cpu_fpr[].
We can simplify the entire implementation by having each
FPOp helper call check_ieee_exceptions. For the moment this
requires that all FPop helpers write to the TCG global cpu_fsr,
so remove TCG_CALL_NO_WG from the DEF_HELPER_FLAGS_*.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-19-richard.henderson@linaro.org>
The `if not probe_proc_self_mem` check never passes, because
probe_proc_self_mem is a function object, which is a truthy value.
Add parentheses in order to perform a function call.
Fixes: dc84d50a7f9b ("tests/tcg: Add the PROT_NONE gdbstub test")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240131220245.235993-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For user-only mode, use MMU_USER_IDX.
For system mode, use CPUClass.mmu_index.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than adjust env->hflags so that the value computed
by cpu_mmu_index() changes, compute the mmu_idx that we
want directly and pass it down.
Introduce symbolic constants for MMU_{KERNEL,ERL}_IDX.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The expected form is MMU_FOO_IDX, not MMU_IDX_FOO.
Rename to match generic code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rework matching of network devices to -nic options (v2)
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmW9F9oSHGR3bXdAYW1h
# em9uLmNvLnVrAAoJEJvpgP0KwBVEVwsQAIIDTYb3R/vxpf6w9n+n6FWCbFt/ihPC
# RbQ/Zrnoj6K3dCj6U3zJDpa5qpJ27/AiFfVv/gU13d+ELf72uHKE50GkQa2r/Fl8
# cPoW1LRinGFGxQS+WY5OnRYJ2mBaVx6THUd5DCgb5wpkBgVe21XsZLr6pfAapNCG
# c22HBaIb8sHPeIV2wf1xZKEswNGlkXuylBnS4wayncRKa2vOYPAAO7P4PvwNuMnb
# j0pLyLfD6Zx+6D53ema4zpcDh7d1Qn5eDGHQmy55Ml5AleC05gsDzrCEeiT4vU9T
# 9fj6w8NlyLkPYLqTodAEeaUpUCFhMO312VPSM163iYOUDtjqz10bBZncgbRrsR5I
# 30bKqQvEQ8PAQZWILNhfyHrYw4/O2Y88sUf/lE8lGmHvVYda+yqq5lgEyPFHbJwh
# ZCEJQalc6tRATIWUqI/Lw+X7hqnJ29c14hkEVG8L0KW0fIB/cqXUStzcUt87VkA2
# wwQI4aAGWZE1pvFvhmeM2rTDXfg1uD8SoFDTj4ORJl/7PEemf1yraKUYb8YdRE0z
# dQWfLmSnl1JkTa0yVF5MtnoTJUP8PX+hhJROfdwvfd1sU5s98O5pivYf7arUybVl
# j4g4qwm8IUBiAznZzbhdp38Q91RFvBKjjLsx/+Ts9avZTL0xCUcCvt21wzqWhbkc
# X7KdrU/XxVry
# =4PuR
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Feb 2024 16:27:06 GMT
# gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544
# gpg: issuer "dwmw@amazon.co.uk"
# gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown]
# gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544
* tag 'pull-nic-config-2-20240202' of git://git.infradead.org/users/dwmw2/qemu: (47 commits)
net: make nb_nics and nd_table[] static in net/net.c
net: remove qemu_show_nic_models(), qemu_find_nic_model()
hw/pci: remove pci_nic_init_nofail()
net: remove qemu_check_nic_model()
hw/xtensa/xtfpga: use qemu_create_nic_device()
hw/sparc/sun4m: use qemu_find_nic_info()
hw/s390x/s390-virtio-ccw: use qemu_create_nic_device()
hw/riscv: use qemu_configure_nic_device()
hw/openrisc/openrisc_sim: use qemu_create_nic_device()
hw/net/lasi_i82596: use qemu_create_nic_device()
hw/net/lasi_i82596: Re-enable build
hw/mips/jazz: use qemu_find_nic_info()
hw/mips/mipssim: use qemu_create_nic_device()
hw/microblaze: use qemu_configure_nic_device()
hw/m68k/q800: use qemu_find_nic_info()
hw/m68k/mcf5208: use qemu_create_nic_device()
hw/net/etraxfs-eth: use qemu_configure_nic_device()
hw/arm: use qemu_configure_nic_device()
hw/arm/stellaris: use qemu_find_nic_info()
hw/arm/npcm7xx: use qemu_configure_nic_device, allow emc0/emc1 as aliases
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also remove the stale declaration of host_net_devices; the actual
definition was removed long ago in commit 7cc28cb061 ("net: Remove
the deprecated 'host_net_add' and 'host_net_remove' HMP commands")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
These old functions can be removed now too. Let net_param_nic() print
the full set of network devices directly, and also make it note that a
list more specific to this platform/config will be available by using
'-nic model=help' instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This function is no longer used, as all its callers have been converted
to use pci_init_nic_devices() instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
There are no callers of this function any more, as they have all been
converted to qemu_{create,configure}_nic_device().
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Obtain the MAC address from the NIC configuration if there is one, or
generate one explicitly so that it can be placed in the PROM.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Create the device only if there is a corresponding NIC config for it.
Remove the explicit check on nd_table[0].used from hw/hppa/machine.c
which (since commit d8a3220005) tries to do the same thing.
The lasi_82596 support has been disabled since it was first introduced,
since enable_lasi_lan() has always been zero. This allows the user to
enable it by explicitly requesting a NIC model 'lasi_82596' or just
using the alias 'lasi'. Otherwise, it defaults to a PCI NIC as before.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When converting to the shiny build-system-du-jour, a typo prevented the
last_i82596 driver from being built. Correct the config option name to
re-enable the build. And include "sysemu/sysemu.h" so it actually builds.
Fixes: b1419fa665 ("meson: convert hw/net")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2144
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The MIPS SIM platform instantiates its NIC only if a corresponding
configuration exists for it. Use qemu_create_nic_device() function for
that.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
If a corresponding NIC configuration was found, it will have a MAC address
already assigned, so use that. Else, generate and assign a default one.
Using qemu_find_nic_info() is simpler than the alternative of using
qemu_configure_nic_device() and then having to fetch the "mac" property
as a string and convert it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Rather than just using qemu_configure_nic_device(), populate the MAC
address in the system-registers device by peeking at the NICInfo before
it's assigned to the device.
Generate the MAC address early, if there is no matching -nic option.
Otherwise the MAC address wouldn't be generated until net_client_init1()
runs.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Also update the test to specify which device to attach the test socket
to, and remove the comment lamenting the fact that we can't do so.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preseve the existing behaviour for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preserve the existing behaviour of each caller for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The first sunhme NIC gets placed a function 1 on slot 1 of PCI bus A,
and the rest are dynamically assigned on PCI bus B.
Previously, any PCI NIC would get the special treatment purely by
virtue of being first in the list.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Previously, the first PCI NIC would be assigned to slot 2 even if the
user override the model and made it something other than an rtl8139
which is the default. Everything else would be dynamically assigned.
Now, the first rtl8139 gets slot 2 and everything else is dynamic.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Avoid directly referencing nd_table[] by first instantiating any
spapr-vlan devices using a qemu_get_nic_info() loop, then calling
pci_init_nic_devices() to do the rest.
No functional change intended.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Previously, the first PCI NIC would be placed in PCI slot 3 and the rest
would be dynamically assigned. Even if the user overrode the default NIC
type and made it something other than PCNet.
Now, the first PCNet NIC (that is, anything not explicitly specified
to be anything different) will go to slot 3 even if it isn't the first
NIC specified on the command line. And anything else will be dynamically
assigned.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The Malta board setup code would previously place the first NIC into PCI
slot 11 if was a PCNet card, and the rest (including the first if it was
anything other than a PCNet card) would be dynamically assigned.
Now it will place any PCNet NIC into slot 11, and then anything else will
be dynamically assigned.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The previous behaviour was: *if* the first NIC specified on the command
line was an RTL8139 (or unspecified model) then it gets assigned to PCI
slot 7, which is where the Fuloong board had an RTL8139. All other
devices (including the first, if it was specified as anything other than
an rtl8319) get dynamically assigned on the bus.
The new behaviour is subtly different: If the first NIC was given a
specific model *other* than rtl8139, and a subsequent NIC was not,
then the rtl8139 (or unspecified) NIC will go to slot 7 and the rest
will be dynamically assigned.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When instantiating XenBus itself, for each NIC which is configured with
either the model unspecified, or set to to "xen" or "xen-net-device",
create a corresponding xen-net-device for it.
Now we can revert the previous more hackish version which relied on the
platform code explicitly registering the NICs on its own XenBus, having
returned the BusState* from xen_bus_init() itself.
This also fixes the setup for Xen PV guests, which was previously broken
in various ways and never actually managed to peer with the netdev.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Eliminate direct access to nd_table[] and nb_nics by processing the the
Xen and ISA NICs first and then calling pci_init_nic_devices() for the
rest.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The loop over nd_table[] to add PCI NICs is repeated in quite a few
places. Add a helper function to do it.
Some platforms also try to instantiate a specific model in a specific
slot, to match the real hardware. Add pci_init_nic_in_slot() for that
purpose.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This will instantiate any NICs which live on a given bus type. Each bus
is allowed *one* substitution (for PCI it's virtio → virtio-net-pci, for
Xen it's xen → xen-net-device; no point in overengineering it unless we
actually want more).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
By noting the models for which a configuration was requested, we can give
the user an accurate list of which NIC models were actually available on
the platform/configuration that was otherwise chosen.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Most code which directly accesses nd_table[] and nb_nics uses them for
one of two things. Either "I have created a NIC device and I'd like a
configuration for it", or "I will create a NIC device *if* there is a
configuration for it". With some variants on the theme around whether
they actually *check* if the model specified in the configuration is
the right one.
Provide functions which perform both of those, allowing platforms to
be a little more consistent and as a step towards making nd_table[]
and nb_nics private to the net code.
One might argue that platforms ought to be consistent about whether
they create the unconfigured devices or not, but making significant
user-visible changes is explicitly *not* the intent right now.
The new functions leave the 'model' field of the NICInfo as NULL after
using it for the default NIC model, unlike the qemu_check_nic_model()
function which does set nd->model to match default_model explicitly.
This is acceptable because there is no code which consumes nd->model
except this NIC-matching code in net/net.c, and no reasonable excuse
for any code wanting to use nd->model in future.
Also export the qemu_find_nic_info() helper, as some platforms have
special cases they need to handle.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch will allow the SPI controller to be accessible from BCM2835 based
boards as SPI0. SPI driver is usually disabled by default and config.txt does
not work.
Instead, dtmerge can be used to apply spi=on on a bcm2835 dtb file.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Message-id: 20240129221807.2983148-3-rayhan.faizel@gmail.com
[PMM: indent tweak]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Implementation of Transmit function for packets
- Implementation for reading and writing from and to descriptors in
memory for Tx
Added relevant trace-events
NOTE: This function implements the steps detailed in the datasheet for
transmitting messages from the GMAC.
Change-Id: Icf14f9fcc6cc7808a41acd872bca67c9832087e6
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240131002800.989285-6-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Implementation of Receive function for packets
- Implementation for reading and writing from and to descriptors in
memory for Rx
When RX starts, we need to flush the queued packets so that they
can be received by the GMAC device. Without this it won't work
with TAP NIC device.
When RX descriptor list is full, it returns a DMA_STATUS for
software to handle it. But there's no way to indicate the software has
handled all RX descriptors and the whole pipeline stalls.
We do something similar to NPCM7XX EMC to handle this case.
1. Return packet size when RX descriptor is full, effectively dropping
these packets in such a case.
2. When software clears RX descriptor full bit, continue receiving
further packets by flushing QEMU packet queue.
Added relevant trace-events
Change-Id: I132aa254a94cda1a586aba2ea33bbfc74ecdb831
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240131002800.989285-5-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements the basic registers of GMAC device and sets
registers for networking functionalities.
Squashed IRQ Implementation patch into this one for compliation.
Tested:
The following message shows up with the change:
Broadcom BCM54612E stmmac-0:00: attached PHY driver [Broadcom BCM54612E] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
stmmaceth f0802000.eth eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Change-Id: If71c6d486b95edcccba109ba454870714d7e0940
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Nabih Estefan Diaz <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240131002800.989285-2-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the QEMU Coding Style document:
> Do not use printf(), fprintf() or monitor_printf(). Instead, use
> error_report() or error_vreport() from error-report.h. This ensures the
> error is reported in the right place (current monitor or stderr), and in
> a uniform format.
> Use error_printf() & friends to print additional information.
This commit changes fprintfs that report warnings and errors to the
appropriate report functions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 42a8953553cf68e8bacada966f93af4fbce45919.1706544115.git.manos.pitsidianakis@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The latest version of qemu (v8.2.0-869-g7a1dc45af5) crashes when booting
the mcimx7d-sabre emulation with Linux v5.11 and later.
qemu-system-arm: ../system/memory.c:2750: memory_region_set_alias_offset: Assertion `mr->alias' failed.
Problem is that the Designware PCIe emulation accepts the full value range
for the iATU Viewport Register. However, both hardware and emulation only
support four inbound and four outbound viewports.
The Linux kernel determines the number of supported viewports by writing
0xff into the viewport register and reading the value back. The expected
value when reading the register is the highest supported viewport index.
Match that code by masking the supported viewport value range when the
register is written. With this change, the Linux kernel reports
imx6q-pcie 33800000.pcie: iATU: unroll F, 4 ob, 4 ib, align 0K, limit 4G
as expected and supported.
Fixes: d64e5eabc4 ("pci: Add support for Designware IP block")
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Nikita Ostrenkov <n.ostrenkov@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20240129060055.2616989-1-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The npcm7xx Soc is created with a Cortex-A9 core, see in
hw/arm/npcm7xx.c:
static void npcm7xx_init(Object *obj)
{
NPCM7xxState *s = NPCM7XX(obj);
for (int i = 0; i < NPCM7XX_MAX_NUM_CPUS; i++) {
object_initialize_child(obj, "cpu[*]", &s->cpu[i],
ARM_CPU_TYPE_NAME("cortex-a9"));
}
The MachineClass::default_cpu_type field is ignored: delete it.
Use the common code introduced in commit c9cf636d48 ("machine: Add
a valid_cpu_types property") to check for valid CPU type at the
board level.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240129151828.59544-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Musca boards use the embedded subsystems (SSE) tied to a specific
Cortex core. Our models only use the Cortex-M33.
Use the common code introduced in commit c9cf636d48 ("machine: Add
a valid_cpu_types property") to check for valid CPU type at the
board level.
Remove the now unused MachineClass::default_cpu_type field.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240129151828.59544-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The M2Sxxx SoC family can only be used with Cortex-M3.
Propagating the CPU type from the board level is pointless.
Hard-code the CPU type at the SoC level.
Remove the now ignored MachineClass::default_cpu_type field.
Use the common code introduced in commit c9cf636d48 ("machine: Add
a valid_cpu_types property") to check for valid CPU type at the
board level.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240129151828.59544-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Restrict MachineClass::valid_cpu_types[] to the single
valid CPU types.
Instead of ignoring invalid CPU type requested by the user:
$ qemu-system-arm -M midway -cpu cortex-a7 -S -monitor stdio
QEMU 8.2.50 monitor - type 'help' for more information
(qemu) info qom-tree
/machine (midway-machine)
/cpu[0] (cortex-a15-arm-cpu)
...
we now display an error:
$ qemu-system-arm -M midway -cpu cortex-a7
qemu-system-arm: Invalid CPU model: cortex-a7
The only valid type is: cortex-a15
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20240129151828.59544-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Restrict MachineClass::valid_cpu_types[] to the single
valid CPU type.
Instead of ignoring invalid CPU type requested by the user:
$ qemu-system-arm -M nuri -cpu cortex-a7 -S -monitor stdio
QEMU 8.2.50 monitor - type 'help' for more information
(qemu) info qom-tree
/machine (nuri-machine)
/soc (exynos4210)
/cpu[0] (cortex-a9-arm-cpu)
...
We now display an error:
$ qemu-system-arm -M nuri -cpu cortex-a7
qemu-system-arm: Invalid CPU model: cortex-a7
The only valid type is: cortex-a9
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20240129151828.59544-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can't just embed labels directly into files like qemu-options.hx which
are included from multiple top-level rST files, because Sphinx sees the
labels as duplicate: https://github.com/sphinx-doc/sphinx/issues/9707
So add an optional argument to the SRST directive which causes a label
of the form '.. _DOCNAME-HXFILE-LABEL:' to be emitted, where 'DOCNAME'
is the name of the top level rST file, 'HXFILE' is the filename of the
.hx file, and 'LABEL' is the text provided within the 'SRST()' directive.
Using the DOCNAME of the top-level rST document means that it is unique
even when the .hx file is included from two different documents, as is
the case for qemu-options.hx
Now where the Xen PV documentation refers to the documentation for the
-initrd command line option, it can emit a link directly to it as
'<system/invocation-qemu-options-initrd>'.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240130190348.682912-1-dwmw2@infradead.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test program is the last use of any variable length array in the
codebase. If we can get rid of all uses of VLAs we can make the
compiler error on new additions. This is a defensive measure against
security bugs where an on-stack dynamic allocation isn't correctly
size-checked (e.g. CVE-2021-3527).
In this case the test code didn't even want a variable-sized
array, it was just accidentally using syntax that gave it one.
(The array size for C has to be an actual constant expression,
not just something that happens to be known to be constant...)
Remove the VLA usage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-id: 20240125173211.1786196-2-peter.maydell@linaro.org
In kernel commit 5d5b4e8c2d9ec ("arm64/sve: Report FEAT_SVE_B16B16 to
userspace") Linux added ID_AA64ZFR0_el1.B16B16 to the set of ID
register fields which it exposes to userspace. Update our
exported_bits mask to include this.
(This doesn't yet change any behaviour for us, because we don't yet
have any CPUs that implement this feature, which is part of SVE2.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240125134304.1470404-1-peter.maydell@linaro.org
The -serial option documentation is a bit brief about '-serial none'
and '-serial null'. In particular it's not very clear about the
difference between them, and it doesn't mention that it's up to
the machine model whether '-serial none' means "don't create the
serial port" or "don't wire the serial port up to anything".
Expand on these points.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240122163607.459769-3-peter.maydell@linaro.org
Currently if the user passes multiple -serial options on the command
line, we mostly treat those as applying to the different serial
devices in order, so that for example
-serial stdio -serial file:filename
will connect the first serial port to stdio and the second to the
named file.
The exception to this is the '-serial none' serial device type. This
means "don't allocate this serial device", but a bug means that
following -serial options are not correctly handled, so that
-serial none -serial stdio
has the unexpected effect that stdio is connected to the first serial
port, not the second.
This is a very long-standing bug that dates back at least as far as
commit 998bbd74b9 from 2009.
Make the 'none' serial type move forward in the indexing of serial
devices like all the other serial types, so that any subsequent
-serial options are correctly handled.
Note that if your commandline mistakenly had a '-serial none' that
was being overridden by a following '-serial something' option, you
should delete the unnecessary '-serial none'. This will give you the
same behaviour as before, on QEMU versions both with and without this
bug fix.
Cc: qemu-stable@nongnu.org
Reported-by: Bohdan Kostiv <bohdan.kostiv@tii.ae>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240122163607.459769-2-peter.maydell@linaro.org
Fixes: 998bbd74b9 ("default devices: core code & serial lines")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch the PCI bus from using BusClass::reset to the Resettable
interface.
This has no behavioural change, because the BusClass code to support
subclasses that use the legacy BusClass::reset will call that method
in the hold phase of 3-phase reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-id: 20240119163512.3810301-2-peter.maydell@linaro.org
aspeed queue:
* Update of buildroot images to 2023.11 (6.6.3 kernel)
* Check of the valid CPU type supported by aspeed machines
* Simplified models for the IBM's FSI bus and the Aspeed
controller bridge
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmW7Sa8ACgkQUaNDx8/7
# 7KG7mw/8DbMJY6aqgq5YANszzem1ktJphPCNxq081cbczCOUpCNX4aL+0/ANvxxD
# lbJQB+SZeIRmuFbxYPhq68rtzB4vG7tsQpns4H33EPKT4vuzF70lq4fgptMiun3q
# 1ZJ2LF3jonvQWdhbC17wzAQz0FFb4F7XOxz++UL4okPsgzsYItnd+TWs8q7+erRb
# 84UwN+eBTBAl/FiNk679/tBTqAfCVGgQ7dzotr4f3tg5POvrGOrlEjAn0O+dGGDj
# wgILmpEBsTsilRB1tz8Kw0j/v/VkHz1DJu45lRAV9CIrN22iKcjMilNGgNDT8kcI
# yAlxAw3iN+hVFqDov8wFPjDYd/Qw2oRAPy2Kd14hW9xL8zBOTms1JK5L0PS2+Feo
# ZjMJ2cOJq3t4Wt1ZXRhgHfF4ANwP0OZ/y9bHCy3CkBljEeiTQbikHP9gVV4qHXZH
# 4Q0HnDZQwAgobw3CmZ8jVx1dQueqy3ycuvkhCyv3S0l/tdbtXDtr5pNNu3dAP/PJ
# 3nifLdRImhDvxxO9GKaCdUVLzELzMJl0GrgAsVJPKVnKHA4IiVKmB+XcW9IUbfy/
# 3zA2wHJLrEF+MF6MsuNcEYCCqUvyNLm7rUrXk1wNLXpCJ35bbW5IYy7Ty/8E2GHb
# D5Cv/EPNhMBiNA4+HqQlMOTC13Ozv2qwCuWYCh2Ik8mnzaEiyTo=
# =0C5S
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Feb 2024 07:35:11 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu:
hw/fsi: Update MAINTAINER list
hw/fsi: Added FSI documentation
hw/fsi: Added qtest
hw/arm: Hook up FSI module in AST2600
hw/fsi: Aspeed APB2OPB & On-chip peripheral bus
hw/fsi: Introduce IBM's FSI master
hw/fsi: Introduce IBM's cfam
hw/fsi: Introduce IBM's fsi-slave model
hw/fsi: Introduce IBM's FSI Bus
hw/fsi: Introduce IBM's scratchpad device
hw/fsi: Introduce IBM's Local bus
hw/arm/aspeed: Check for CPU types in machine_run_board_init()
hw/arm/aspeed: Introduce aspeed_soc_cpu_type() helper
hw/arm/aspeed: Init CPU defaults in a common helper
hw/arm/aspeed: Set default CPU count using aspeed_soc_num_cpus()
hw/arm/aspeed: Remove dead code
tests/avocado/machine_aspeed.py: Update buildroot images to 2023.11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pull-loongarch-20240201
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZbtI0AAKCRBAov/yOSY+
# 35J4A/9ehl15MIrkByqq8QNQnG4PbKWOTcTev6P0sEAhzPUtBpcGPesoHnt+DFuk
# f3WluWsfnFY9pCRgB9VBSpy89O6Efj187bpekT/PD5svPOXoUmETafv1p2vsVrpj
# huMNijt7I/LAXUCb2gA5pnNH9vrrJ8E5kQlgmYfh35cEhHObMQ==
# =Q9Gn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Feb 2024 07:31:28 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240201' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix qtest test-hmp error when KVM-only build
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add maintainer for IBM FSI model
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - slight change in commit log
- fixed file list ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Added basic qtests for FSI model.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[ clg: aspeed-fsi-test.c -> aspeed_fsi-test.c to match other filenames ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patchset introduces IBM's Flexible Service Interface(FSI).
Time for some fun with inter-processor buses. FSI allows a service
processor access to the internal buses of a host POWER processor to
perform configuration or debugging.
FSI has long existed in POWER processes and so comes with some baggage,
including how it has been integrated into the ASPEED SoC.
Working backwards from the POWER processor, the fundamental pieces of
interest for the implementation are:
1. The Common FRU Access Macro (CFAM), an address space containing
various "engines" that drive accesses on buses internal and external
to the POWER chip. Examples include the SBEFIFO and I2C masters. The
engines hang off of an internal Local Bus (LBUS) which is described
by the CFAM configuration block.
2. The FSI slave: The slave is the terminal point of the FSI bus for
FSI symbols addressed to it. Slaves can be cascaded off of one
another. The slave's configuration registers appear in address space
of the CFAM to which it is attached.
3. The FSI master: A controller in the platform service processor (e.g.
BMC) driving CFAM engine accesses into the POWER chip. At the
hardware level FSI is a bit-based protocol supporting synchronous and
DMA-driven accesses of engines in a CFAM.
4. The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
POWER processors. This now makes an appearance in the ASPEED SoC due
to tight integration of the FSI master IP with the OPB, mainly the
existence of an MMIO-mapping of the CFAM address straight onto a
sub-region of the OPB address space.
5. An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.
The implementation appears as following in the qemu device tree:
(qemu) info qtree
bus: main-system-bus
type System
...
dev: aspeed.apb2opb, id ""
gpio-out "sysbus-irq" 1
mmio 000000001e79b000/0000000000001000
bus: opb.1
type opb
dev: fsi.master, id ""
bus: fsi.bus.1
type fsi.bus
dev: cfam.config, id ""
dev: cfam, id ""
bus: fsi.lbus.1
type lbus
dev: scratchpad, id ""
address = 0 (0x0)
bus: opb.0
type opb
dev: fsi.master, id ""
bus: fsi.bus.0
type fsi.bus
dev: cfam.config, id ""
dev: cfam, id ""
bus: fsi.lbus.0
type lbus
dev: scratchpad, id ""
address = 0 (0x0)
The LBUS is modelled to maintain the qdev bus hierarchy and to take
advantage of the object model to automatically generate the CFAM
configuration block. The configuration block presents engines in the
order they are attached to the CFAM's LBUS. Engine implementations
should subclass the LBusDevice and set the 'config' member of
LBusDeviceClass to match the engine's type.
CFAM designs offer a lot of flexibility, for instance it is possible for
a CFAM to be simultaneously driven from multiple FSI links. The modeling
is not so complete; it's assumed that each CFAM is attached to a single
FSI slave (as a consequence the CFAM subclasses the FSI slave).
As for FSI, its symbols and wire-protocol are not modelled at all. This
is not necessary to get FSI off the ground thanks to the mapping of the
CFAM address space onto the OPB address space - the models follow this
directly and map the CFAM memory region into the OPB's memory region.
Future work includes supporting more advanced accesses that drive the
FSI master directly rather than indirectly via the CFAM mapping, which
will require implementing the FSI state machine and methods for each of
the FSI symbols on the slave. Further down the track we can also look at
supporting the bitbanged SoftFSI drivers in Linux by extending the FSI
slave model to resolve sequences of GPIO IRQs into FSI symbols, and
calling the associated symbol method on the slave to map the access onto
the CFAM.
Testing:
Tested by reading cfam config address 0 on rainier machine type.
root@p10bmc:~# pdbg -a getcfam 0x0
p0: 0x0 = 0xc0022d15
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.
The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
POWER processors. This now makes an appearance in the ASPEED SoC due
to tight integration of the FSI master IP with the OPB, mainly the
existence of an MMIO-mapping of the CFAM address straight onto a
sub-region of the OPB address space.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved FSIMasterState under AspeedAPB2OPBState
- modified fsi_opb_fsi_master_address() and
fsi_opb_opb2fsi_address()
- instroduced fsi_aspeed_apb2opb_init()
- reworked fsi_aspeed_apb2opb_realize()
- removed FSIMasterState object and fsi_opb_realize()
- simplified OPBus
- introduced fsi_aspeed_apb2opb_rw to fix endianness issue ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
This commit models the FSI master. CFAM is hanging out of FSI master which is a bus controller.
The FSI master: A controller in the platform service processor (e.g.
BMC) driving CFAM engine accesses into the POWER chip. At the
hardware level FSI is a bit-based protocol supporting synchronous and
DMA-driven accesses of engines in a CFAM.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - move FSICFAMState object under FSIMasterState
- introduced fsi_master_init()
- reworked fsi_master_realize()
- dropped FSIBus definition ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
The Common FRU Access Macro (CFAM), an address space containing
various "engines" that drive accesses on busses internal and external
to the POWER chip. Examples include the SBEFIFO and I2C masters. The
engines hang off of an internal Local Bus (LBUS) which is described
by the CFAM configuration block.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved object FSIScratchPad under FSICFAMState
- moved FSIScratchPad code under cfam.c
- introduced fsi_cfam_instance_init()
- reworked fsi_cfam_realize() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
The FSI slave: The slave is the terminal point of the FSI bus for
FSI symbols addressed to it. Slaves can be cascaded off of one
another. The slave's configuration registers appear in address space
of the CFAM to which it is attached.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where FSI bus is introduced.
The FSI bus is a simple bus where FSI master is attached.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - removed include/hw/fsi/engine-scratchpad.h and
hw/fsi/engine-scratchpad.c
- dropped FSI_SCRATCHPAD
- included FSIBus definition
- dropped hw/fsi/trace-events changes ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
The scratchpad provides a set of non-functional registers. The firmware
is free to use them, hardware does not support any special management
support. The scratchpad registers can be read or written from LBUS
slave. The scratch pad is managed under FSI CFAM state.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved object FSIScratchPad under FSICFAMState
- moved FSIScratchPad code under cfam.c ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
The LBUS is modelled to maintain mapped memory for the devices. The
memory is mapped after CFAM config, peek table and FSI slave registers.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - removed lbus_add_device() bc unused
- removed lbus_create_device() bc used only once
- removed "address" property
- updated meson.build to build fsi dir
- included an empty hw/fsi/trace-events ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Aspeed SoCs use a single CPU type (set as AspeedSoCClass::cpu_type).
Convert it to a NULL-terminated array (of a single non-NULL element).
Set MachineClass::valid_cpu_types[] to use the common machine code
to provide hints when the requested CPU is invalid (see commit
e702cbc19e ("machine: Improve is_cpu_type_supported()").
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In order to alter AspeedSoCClass::cpu_type in the next
commit, introduce the aspeed_soc_cpu_type() helper to
retrieve the per-SoC CPU type from AspeedSoCClass.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Rework aspeed_soc_num_cpus() as a new init_cpus_defaults()
helper to reduce code duplication.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since commit b7f1a0cb76 ("arm/aspeed: Compute the number
of CPUs from the SoC definition") Aspeed machines use the
aspeed_soc_num_cpus() helper to set the number of CPUs.
Use it for the ast1030-evb (commit 356b230ed1 "aspeed/soc:
Add AST1030 support") and supermicrox11-bmc (commit 40a38df55e
"hw/arm/aspeed: Add board model for Supermicro X11 BMC") machines.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
trivial patches for 2024-01-31
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmW6NScPHG1qdEB0bHMu
# bXNrLnJ1AAoJEHAbT2saaT5ZdQYH/2fhfhZotH0V2qAcMxlOoHbAE9UhZNRsSYtf
# QFP0GXFYFAMm7LHkPUbvKgO7LylKWAOMn/zKZqgj1Vf1EpoKQ2FwLtR/buDz86Ec
# pi2OrDPRA7Ay5c3ow3YZZkUOhQTTcR5rNjYctPtt/J4j8ol/z5vre7weJIg2bCJe
# zI7vIVg7iFFzbkXY20KHngJ5nDC+aEm7WaGlxAP8kfkvy324Wy9O2k8qu2J5zbLT
# HGvh3rwEDvRTYe4CaKFFHWNV0m4092HAr/dJBobugI5VZ6QQpK6Tgy8N+4ZrCHD2
# SjUKeym85VTOYGuY8b18fk5MQK2SzsfBUJ4x8VGC75W4mJ8agdc=
# =HImO
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 31 Jan 2024 11:55:19 GMT
# gpg: using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg: issuer "mjt@tls.msk.ru"
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@debian.org>" [full]
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: (21 commits)
hw/hyperv: Include missing headers
hw/intc/xics: Include missing 'cpu.h' header
hw/arm: Add `\n` to hint message
hw/loongarch: Add `\n` to hint message
hw/i386: Add `\n` to hint message
backends/hostmem: Fix block comments style (checkpatch.pl warnings)
misc: Clean up includes
riscv: Clean up includes
cxl: Clean up includes
include: Clean up includes
m68k: Clean up includes
acpi: Clean up includes
aspeed: Clean up includes
disas/riscv: Clean up includes
hyperv: Clean up includes
scripts/clean-includes: Update exclude list
mailmap: Fix Stefan Weil email
qemu-docs: Update options for graphical frontends
qapi/migration.json: Fix the member name for MigrationCapability
colo: examples: remove mentions of script= and (wrong) downscript=
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The following expression is incorrect because blk_pread_nonzeroes()
deals in units of bytes, not sectors:
bytes = MIN(size - offset, BDRV_REQUEST_MAX_SECTORS)
^^^^^^^
BDRV_REQUEST_MAX_BYTES is the appropriate constant.
Fixes: a4b15a8b9e ("pflash: Only read non-zero parts of backend image")
Cc: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240130002712.257815-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With GCC 14 the code failed to compile on i686 (and was wrong for any
version of GCC):
../block/blkio.c: In function ‘blkio_file_open’:
../block/blkio.c:857:28: error: passing argument 3 of ‘blkio_get_uint64’ from incompatible pointer type [-Wincompatible-pointer-types]
857 | &s->mem_region_alignment);
| ^~~~~~~~~~~~~~~~~~~~~~~~
| |
| size_t * {aka unsigned int *}
In file included from ../block/blkio.c:12:
/usr/include/blkio.h:49:67: note: expected ‘uint64_t *’ {aka ‘long long unsigned int *’} but argument is of type ‘size_t *’ {aka ‘unsigned int *’}
49 | int blkio_get_uint64(struct blkio *b, const char *name, uint64_t *value);
| ~~~~~~~~~~^~~~~
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20240130122006.2977938-1-rjones@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The man page for io_uring_queue_init states:
> io_uring_queue_init(3) returns 0 on success and -errno on failure.
and the man page for io_uring_setup (which is one of the functions
where the return value of io_uring_queue_init() can come from) states:
> On error, a negative error code is returned. The caller should not
> rely on errno variable.
Tested using 'sysctl kernel.io_uring_disabled=2'. Output before this
change:
> failed to init linux io_uring ring
Output after this change:
> failed to init linux io_uring ring: Operation not permitted
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240123135044.204985-1-f.ebner@proxmox.com>
Include missing headers in order to avoid when refactoring
unrelated headers:
hw/hyperv/hyperv.c:33:18: error: field ‘msg_page_mr’ has incomplete type
33 | MemoryRegion msg_page_mr;
| ^~~~~~~~~~~
hw/hyperv/hyperv.c: In function ‘synic_update’:
hw/hyperv/hyperv.c:64:13: error: implicit declaration of function ‘memory_region_del_subregion’ [-Werror=implicit-function-declaration]
64 | memory_region_del_subregion(get_system_memory(),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/hyperv/hyperv.c: In function ‘hyperv_hcall_signal_event’:
hw/hyperv/hyperv.c:683:17: error: implicit declaration of function ‘ldq_phys’; did you mean ‘ldub_phys’? [-Werror=implicit-function-declaration]
683 | param = ldq_phys(&address_space_memory, addr);
| ^~~~~~~~
| ldub_phys
hw/hyperv/hyperv.c:683:17: error: nested extern declaration of ‘ldq_phys’ [-Werror=nested-externs]
hw/hyperv/hyperv.c: In function ‘hyperv_hcall_retreive_dbg_data’:
hw/hyperv/hyperv.c:792:24: error: ‘TARGET_PAGE_SIZE’ undeclared (first use in this function); did you mean ‘TARGET_PAGE_BITS’?
792 | msg.u.recv.count = TARGET_PAGE_SIZE - sizeof(*debug_data_out);
| ^~~~~~~~~~~~~~~~
| TARGET_PAGE_BITS
hw/hyperv/hyperv.c: In function ‘hyperv_syndbg_send’:
hw/hyperv/hyperv.c:885:16: error: ‘HV_SYNDBG_STATUS_INVALID’ undeclared (first use in this function)
885 | return HV_SYNDBG_STATUS_INVALID;
| ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Include missing headers in order to avoid when refactoring
unrelated headers:
hw/intc/xics.c: In function 'icp_realize':
hw/intc/xics.c:304:5: error: unknown type name 'PowerPCCPU'
304 | PowerPCCPU *cpu;
| ^~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While re-indenting code in host_memory_backend_memory_complete(),
we triggered various "Block comments use a leading /* on a separate
line" warnings from checkpatch.pl. Correct the comments style.
Fixes: e199f7ad4d ("backends: Simplify host_memory_backend_memory_complete()")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git misc net/af-xdp.c plugins/*.c audio/pwaudio.c util/userfaultfd.c
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git riscv target/riscv/*.[ch]
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git include include/*/*.h include/*/*/*.h
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git m68k include/hw/audio/asc.h include/hw/m68k/*.h
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git acpi include/hw/*/*acpi.h hw/*/*acpi.c
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git disas/riscv disas/riscv*[ch]
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git hyperv hw/hyperv/*.[ch]
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Update the exclude list to exclude some more files which don't follow our
standard #include policy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 5204b499a6 ("mailmap: Fix Stefan Weil author email")
corrected authorship for patch received at qemu-devel@nongnu.org,
correct now for patch received at qemu-trivial@nongnu.org.
Update other authorship email for Stefan's commits.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Fixes: d819fc9516 ("virtio-blk: Fix potential nullptr read access")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The command line options `-ctrl-grab` and `-alt-grab` have been removed
in QEMU 7.1. Instead, use the `-display sdl,grab-mod=<modifiers>` option
to specify the grab modifiers.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2103
Signed-off-by: Yihuan Pan <xun794@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There's no need to repeat script=/etc/qemu-ifup in examples,
as it is already in there. More, all examples uses incorrect
"down script=" (which should be "downscript=").
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
-z without -R has no effect: the dump format remains @elf. Fix the
logic error so it becomes @kdump-zlib.
Fixes: e6549197f7 (dump: Add command interface for kdump-raw formats)
Fixes: CID 1523841
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qga-pull-2024-01-30
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmW409sACgkQ711egWG6
# hOc0PxAAj0Lhgt70OpAGQd5ERBgdRbh2/pJkKvdWBZvUAkVyFEp6Wn1UEC9aRpdi
# g8KCfYWVpp4LKMm5Ok1/8MKzAKT0jJFKatX0iZy/sx5M0A7x2/cJWgTv69L41Ld3
# FoJM/a/te8VUSk/jPKMqf4G7BzqYyHDnAlcnLjnvUsUabnocjmpSSckCNWLtQ/Sz
# RCGOwaTJ4HKW9O7yuw4gcXeYf2G21UemkITLh7Kdv/6fqqlg3k2gRSQeQ11Xh9Tc
# Jst7511vs+9AvDVM67o84z6UQwlp+23IJb3PBG2Td+Odr7BDAturWE4yyqPtjcpf
# Kcy6uMO6ZNYSW9CAspIF271fObLBPdvvMCHabar8x3LwF/6SxdnVRnWbqVsY/LSZ
# j76VB7TashwxzgqXEqmSrJmCSiCU4L7k8+KU0XxqIg4howlHzoRlejuMZzVK8Hyt
# Cu5tqa6yq8+twxzP4qQhkvazGgYgWo/xNaZ8D3h6xxxZ4NE/hN24YodtyFV/NGWE
# VSvUpzTKettECcyPo3OGezOqcr0vW5Z776MQOsMQWAjwm3bjM8hMzuKglnJe7Lt4
# DAbreHQ5s+pELQnq/cv7AVAr3zy2AIpPq4xDPJUHunAh+kMFY3cHCNaKytiRqmf+
# kZtd4nSN9j5+0oE5jSiuPn9C96y3shGL95XR6WW0nN1ImWOVgx4=
# =Tl7c
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 Jan 2024 10:47:55 GMT
# gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7
* tag 'qga-pull-2024-01-30' of https://github.com/kostyanf14/qemu:
qga: Solaris has net/if_arp.h and netinet/if_ether.h but not ETHER_ADDR_LEN
qga-win: Fix guest-get-fsinfo multi-disks collection
tests/unit/test-qga: do not qualify executable paths
guest-agent: improve help for --allow-rpcs and --block-rpcs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Solaris has net/if_arp.h and netinet/if_ether.h rather than net/ethernet.h,
but does not define ETHER_ADDR_LEN, instead providing ETHERADDRL.
Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
guest-exec invocation does not need the full path of the executable to
execute. Using only the command names ensures correct execution of the
test on systems not adhering to the FHS.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The function is now trivial, and with inlining we can
re-use the calling function's tcg_ops variable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migration Pull
[dropped fabiano's patch on modifying cpu model for arm migration tests for
now]
- Fabiano's patchset to fix migration state references in BHs
- Fabiano's new 'n-1' migration test for CI
- Het's fix on making "uri" optional in QMP migrate cmd
- Markus's HMP leak fix reported by Coverity
- Paolo's cleanup on uffd to replace u64 usage
- Peter's small migration cleanup series all over the places
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZbcVeBIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wYHjgD9F2Fnrf4EuPNC/gF3yUvHVz1mgHqevb/g
# pw/ThcJF31wBALuWmwuUaNWm+VNtRc10YH6bY7HZW8oa1RefRN6QZn0L
# =JGTX
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 29 Jan 2024 03:03:20 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240126-pull-request' of https://gitlab.com/peterx/qemu:
Make 'uri' optional for migrate QAPI
migration: Centralize BH creation and dispatch
migration: Add a wrapper to qemu_bh_schedule
migration: Reference migration state around loadvm_postcopy_handle_run_bh
migration: Take reference to migration state around bg_migration_vm_start_bh
migration: Fix use-after-free of migration state object
migration/yank: Use channel features
ci: Disable migration compatibility tests for aarch64
ci: Add a migration compatibility test job
analyze-migration.py: Remove trick on parsing ramblocks
migration: Drop unnecessary check in ram's pending_exact()
migration: Make threshold_size an uint64_t
migration: Plug memory leak on HMP migrate error path
userfaultfd: use 1ULL to build ioctl masks
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both the report() function as well as the initial gdbstub test sequence
are copy-pasted into ~10 files with slight modifications. This
indicates that they are indeed generic, so factor them out. While
at it, add a few newlines to make the formatting closer to PEP-8.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240129093410.3151-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
gdbserver ignores page protection by virtue of using /proc/$pid/mem.
Teach qemu gdbstub to do this too. This will not work if /proc is not
mounted; accept this limitation.
One alternative is to temporarily grant the missing PROT_* bit, but
this is inherently racy. Another alternative is self-debugging with
ptrace(POKE), which will break if QEMU itself is being debugged - a
much more severe limitation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240129093410.3151-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When doing device assignment of a physical device, MSI-X can be
enabled with no vectors enabled and this sets the IRQ index to
VFIO_PCI_MSIX_IRQ_INDEX. However, when MSI-X is disabled, the IRQ
index is left untouched if no vectors are in use. Then, when INTx
is enabled, the IRQ index value is considered incompatible (set to
MSI-X) and VFIO_DEVICE_SET_IRQS fails. QEMU complains with :
qemu-system-x86_64: vfio 0000:08:00.0: Failed to set up TRIGGER eventfd signaling for interrupt INTX-0: VFIO_DEVICE_SET_IRQS failure: Invalid argument
To avoid that, unconditionaly clear the IRQ index when MSI-X is
disabled.
Buglink: https://issues.redhat.com/browse/RHEL-21293
Fixes: 5ebffa4e87 ("vfio/pci: use an invalid fd to enable MSI-X")
Cc: Jing Liu <jing2.liu@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Do not use uint64_t for the type of the declaration and __u64 when
computing the number of elements in the array.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that the migration state reference counting is correct, further
wrap the bottom half dispatch process to avoid future issues.
Move BH creation and scheduling together and wrap the dispatch with an
intermediary function that will ensure we always keep the ref/unref
balanced.
Also move the responsibility of deleting the BH into the wrapper and
remove the now unnecessary pointers.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240119233922.32588-6-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We need to hold a reference to the current_migration object around
async calls to avoid it been freed while still in use. Even on this
load-side function, we might still use the MigrationState, e.g to
check for capabilities.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240119233922.32588-4-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We're currently allowing the process_incoming_migration_bh bottom-half
to run without holding a reference to the 'current_migration' object,
which leads to a segmentation fault if the BH is still live after
migration_shutdown() has dropped the last reference to
current_migration.
In my system the bug manifests as migrate_multifd() returning true
when it shouldn't and multifd_load_shutdown() calling
multifd_recv_terminate_threads() which crashes due to an uninitialized
multifd_recv_state.
Fix the issue by holding a reference to the object when scheduling the
BH and dropping it before returning from the BH. The same is already
done for the cleanup_bh at migrate_fd_cleanup_schedule().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1969
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240119233922.32588-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Stop using outside knowledge about the io channels when registering
yank functions. Query for features instead.
The yank method for all channels used with migration code currently is
to call the qio_channel_shutdown() function, so query for
QIO_CHANNEL_FEATURE_SHUTDOWN. We could add a separate feature in the
future for indicating whether a channel supports yanking, but that
seems overkill at the moment.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20230911171320.24372-9-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Until 9.0 is out, we need to keep the aarch64 job disabled because the
tests always use the n-1 version of migration-test. That happens to be
broken for aarch64 in 8.2. Once 9.0 is out, it will become the n-1
version and it will bring the fixed tests.
We can revert this patch when 9.0 releases.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240118164951.30350-4-farosas@suse.de
[peterx: use _SKIPPED rather than _OPTIONAL]
Signed-off-by: Peter Xu <peterx@redhat.com>
The migration tests have support for being passed two QEMU binaries to
test migration compatibility.
Add a CI job that builds the lastest release of QEMU and another job
that uses that version plus an already present build of the current
version and run the migration tests with the two, both as source and
destination. I.e.:
old QEMU (n-1) -> current QEMU (development tree)
current QEMU (development tree) -> old QEMU (n-1)
The purpose of this CI job is to ensure the code we're about to merge
will not cause a migration compatibility problem when migrating the
next release (which will contain that code) to/from the previous
release.
The version of migration-test used will be the one matching the older
QEMU. That way we can avoid special-casing new tests that wouldn't be
compatible with the older QEMU.
Note: for user forks, the version tags need to be pushed to gitlab
otherwise it won't be able to checkout a different version.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240118164951.30350-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
When the migration frameworks fetches the exact pending sizes, it means
this check:
remaining_size < s->threshold_size
Must have been done already, actually at migration_iteration_run():
if (must_precopy <= s->threshold_size) {
qemu_savevm_state_pending_exact(&must_precopy, &can_postcopy);
That should be after one round of ram_state_pending_estimate(). It makes
the 2nd check meaningless and can be dropped.
To say it in another way, when reaching ->state_pending_exact(), we
unconditionally sync dirty bits for precopy.
Then we can drop migrate_get_current() there too.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240117075848.139045-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Always include fake_user_interrupt in user-only build, despite
only being used for i386. This will enable cpu-exec.c to be
compiled only once.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-ID: <20240119144024.14289-18-anjo@rev.ng>
[rth: Split out of a larger patch; remove TARGET_I386 conditional.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ifdef out of which it is moved is not quite right: do_interrupt is
only needed for system mode. Move it to the top of a different ifdef
block, which preserves its position within the structure for that case.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-18-anjo@rev.ng>
[rth: Split from a larger patch and simplified.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Needed to work around circular includes. vaddr is currently defined in
cpu-common.h and needed by hw/core/cpu.h, but cpu-common.h also need
cpu.h to know the size of the CPUState.
[Maybe we can instead move parts of cpu-common.h w. hw/core/cpu.h to
sort out the circular inclusion.]
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-7-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[rth: Add include of vaddr.h into cpu-common.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unless I'm missing something egregious, the jmp cache is only every
populated with a valid entry by the same thread that reads the cache.
Therefore, the contents of any valid entry are always consistent and
there is no need for any acquire/release magic.
Indeed ->tb has to be accessed with atomics, because concurrent
invalidations would otherwise cause data races. But ->pc is only ever
accessed by one thread, and accesses to ->tb and ->pc within tb_lookup
can never race with another tb_lookup. While the TranslationBlock
(especially the flags) could be modified by a concurrent invalidation,
store-release and load-acquire operations on the cache entry would
not add any additional ordering beyond what you get from performing
the accesses within a single thread.
Because of this, there is really nothing to win in splitting the CF_PCREL
and !CF_PCREL paths. It is easier to just always use the ->pc field in
the jump cache.
I noticed this while working on splitting commit 8ed558ec0c
("accel/tcg: Introduce TARGET_TB_PCREL", 2022-10-04) into multiple
pieces, for the sake of finding a more fine-grained bisection
result for https://gitlab.com/qemu-project/qemu/-/issues/2092.
It does not (and does not intend to) fix that issue; therefore
it may make sense to not commit it until the root cause
of issue #2092 is found.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240122153409.351959-1-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Block layer patches
- virtio-blk: Multiqueue fixes and cleanups
- blklogwrites: Fixes for write_zeroes and superblock update races
- commit/stream: Allow users to request only format driver names in
backing file format
- monitor: only run coroutine commands in qemu_aio_context
- Some iotest fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmWzpOwRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZNzg//W1+C7HxLft4Jc4O1BcOoOLlGCg4Esupt
# z0/XLZ9+xVQUtjQ82pFzf9XaWQs8CuNT3FBUKi+ngdwZ0JBThIv0aGiMZBcAeQjD
# qshPFgDM1lGL4ICIaT73/qfUzQgO3oruZj9F+ShBBzoasNWVoRzqqVDR3pinLwTp
# D4TU+3A6LkdhlYGT60SYfRq/UKNmCA1s2wysdjqXxS6KOEURNF2VBnz0Nu76qrVb
# 3P/a55GPiJIn+VVsdQ0J4vyyzn23m7I7WZOJ7Sjm1EfSJ6SvcDbhWsZTUonaV2rU
# qZ3WI/jggqxXRV8F2AaA4suS/Cc8RkX2KfcN8fB6wDC2eI5USSatjh6xfw5xH9Ll
# NRKUO4vFFR3Lf8wN9apg0Bwxqi0GOm9kvBJT5QqjQ16R1dvqBLqbZqcx6ZXqWFXe
# /Iy243Tz19mWTFVUj0EgCKQpNz9F4SyXxV83HtSR1lJ5mhthnLxkvUOe7jsFPE4d
# 1Z3uBNWnx2mKFkhlwocMTKayYqxPuKQ+YjqrRoplLW1GZoBeoalKRGf8/RHa6kQx
# gh4cguihlb71AH1AO1QuYpiZt9G4RJR2RZlIoCPJY5TaKJedcxMVn8H+8/F0PnQd
# gPysZf7hTU1xCUV6TClDd+f2fuvqZYwXdwHJ9iiohNkbFq4HFQUp4nk4/eEPGSe/
# uv8oE813E30=
# =KQJl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 26 Jan 2024 12:26:20 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
iotests/277: Use iotests.sock_dir for socket creation
iotests/iothreads-stream: Use the right TimeoutError
tests/unit: Bump test-replication timeout to 60 seconds
iotests/264: Use iotests.sock_dir for socket creation
block/blklogwrites: Protect mutable driver state with a mutex.
virtio-blk: always set ioeventfd during startup
virtio-blk: tolerate failure to set BlockBackend AioContext
virtio-blk: restart s->rq reqs in vq AioContexts
virtio-blk: rename dataplane to ioeventfd
virtio-blk: rename dataplane create/destroy functions
virtio-blk: move dataplane code into virtio-blk.c
monitor: only run coroutine commands in qemu_aio_context
iotests: port 141 to Python for reliable QMP testing
iotests: add filter_qmp_generated_node_ids()
stream: Allow users to request only format driver names in backing file format
commit: Allow users to request only format driver names in backing file format
string-output-visitor: Fix (pseudo) struct handling
block/blklogwrites: Fix a bug when logging "write zeroes" operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The const_le64() macro introduced in commit 845d80a8c7 turns out
to have a bug which means that on big-endian systems the compiler
complains if the argument isn't already a 64-bit type. This hasn't
caused a problem yet, because there are no in-tree uses, but it
means it's not possible for anybody to add one without it failing CI.
This example is from an attempted use of it with the argument '0',
from the s390 CI runner's gcc:
../block/blklogwrites.c: In function ‘blk_log_writes_co_do_log’:
../include/qemu/bswap.h:148:36: error: left shift count >= width of
type [-Werror=shift-count-overflow]
148 | ((((_x) & 0x00000000000000ffU) << 56) | \
| ^~
../block/blklogwrites.c:409:27: note: in expansion of macro ‘const_le64’
409 | .nr_entries = const_le64(0),
| ^~~~~~~~~~
../include/qemu/bswap.h:149:36: error: left shift count >= width of
type [-Werror=shift-count-overflow]
149 | (((_x) & 0x000000000000ff00U) << 40) | \
| ^~
../block/blklogwrites.c:409:27: note: in expansion of macro ‘const_le64’
409 | .nr_entries = const_le64(0),
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Fix this by making all the constants in the macro have the ULL
suffix. This will cause them all to be 64-bit integers, which means
the result of the logical & will also be an unsigned 64-bit type,
even if the input to the macro is a smaller type, and so the shifts
will be in range.
Fixes: 845d80a8c7 ("qemu/bswap: Add const_le64()")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Message-id: 20240122173735.472951-1-peter.maydell@linaro.org
In commit 1b7bc9b5c8 we changed handle_vec_simd_sqshrn() so
that instead of starting with a 0 value and depositing in each new
element from the narrowing operation, it instead started with the raw
result of the narrowing operation of the first element.
This is fine in the vector case, because the deposit operations for
the second and subsequent elements will always overwrite any higher
bits that might have been in the first element's result value in
tcg_rd. However in the scalar case we only go through this loop
once. The effect is that for a signed narrowing operation, if the
result is negative then we will now return a value where the bits
above the first element are incorrectly 1 (because the narrowfn
returns a sign-extended result, not one that is truncated to the
element size).
Fix this by using an extract operation to get exactly the correct
bits of the output of the narrowfn for element 1, instead of a
plain move.
Cc: qemu-stable@nongnu.org
Fixes: 1b7bc9b5c8 ("target/arm: Avoid tcg_const_ptr in handle_vec_simd_sqshrn")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2089
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240123153416.877308-1-peter.maydell@linaro.org
This patch implements a 32 half word FIFO as per imx serial device
specifications. If a non empty FIFO is below the trigger level, an
ageing timer will tick for a duration of 8 characters. On expiry,
AGTIM will be set triggering an interrupt. AGTIM timer resets when
there is activity in the receive FIFO.
Otherwise, RRDY is set when trigger level is exceeded. The receive
trigger level is 8 in newer kernel versions and 1 in older ones.
This change will break migration compatibility for the imx boards.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Message-id: 20240125151931.83494-1-rayhan.faizel@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: commit message tidyups]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a note on CPU features that are off by default in `virt` machines.
Some CPU features will remain off even if a CPU-capable CPU (e.g.,
`-cpu max`) is selected because they require support in both the CPU
itself and in the wider system. Therefore, the user, besides selecting a
CPU that supports such features, must also turn on the feature using a
machine option.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240122211215.95073-1-gustavo.romero@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add MMDC, OCOTP, SQPI, CAAM, and USBMISC as unimplemented devices.
This allows operating systems such as Linux to run emulations such as
mcimx6ul-evk.
Before commit 0cd4926b85 ("Refactor i.MX6UL processor code"), the affected
memory ranges were covered by the unimplemented DAP device. The commit
reduced the DAP address range from 0x100000 to 4kB, and the emulation
thus no longer covered the various unimplemented devices in the affected
address range.
Fixes: 0cd4926b85 ("Refactor i.MX6UL processor code")
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240120005356.2599547-1-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Various files in hw/arm/ don't require "cpu.h" anymore.
Except virt-acpi-build.c, all of them don't require any
ARM specific knowledge anymore and can be build once as
target agnostic units. Update meson accordingly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-21-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARM_CPU_IRQ/FIQ definitions are used to index the GPIO
IRQ created calling qdev_init_gpio_in() in ARMCPU instance_init()
handler. To allow non-ARM code to raise interrupt on ARM cores,
move they to 'target/arm/cpu-qom.h' which is non-ARM specific and
can be included by any hw/ file.
File list to include the new header generated using:
$ git grep -wEl 'ARM_CPU_(\w*IRQ|FIQ)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-18-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now than we can access the M-profile bank index
definitions from the target-agnostic "cpu-qom.h"
header, we don't need the huge "cpu.h" anymore
(except in hw/arm/armv7m.c). Reduce its inclusion
to the source unit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-17-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv7M QDev container accesses the QDev SysTickState
by its secure/non-secure bank index. In order to make
the "hw/intc/armv7m_nvic.h" header target-agnostic in
the next commit, first move the M-profile bank index
definitions to "target/arm/cpu-qom.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-16-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"target/arm/cpu.h" is target specific, any file including it
becomes target specific too, thus this is the same for any file
including "hw/misc/xlnx-versal-crl.h".
"hw/misc/xlnx-versal-crl.h" doesn't require any target specific
definition however, only the target-agnostic QOM definitions
from "target/arm/cpu-qom.h". Include the latter header to avoid
tainting unnecessary objects as target-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-14-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Declare arm_cpu_mp_affinity() prototype in the new
"target/arm/multiprocessing.h" header so units in
hw/arm/ can use it without having to include the huge
target-specific "cpu.h".
File list to include the new header generated using:
$ git grep -lw arm_cpu_mp_affinity
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm/cpregs.h uses the CP_REG_ARCH_* definitions
from "target/arm/kvm-consts.h". Include it in order to
avoid when refactoring unrelated headers:
target/arm/cpregs.h:191:18: error: use of undeclared identifier 'CP_REG_ARCH_MASK'
if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) {
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm/cpregs.h uses the FIELD() macro defined in
"hw/registerfields.h". Include it in order to avoid when
refactoring unrelated headers:
target/arm/cpregs.h:347:30: error: expected identifier
FIELD(HFGRTR_EL2, AFSR0_EL1, 0, 1)
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm/cpu-features.h uses the FIELD_EX32() macro
defined in "hw/registerfields.h". Include it in order
to avoid when refactoring unrelated headers:
target/arm/cpu-features.h:44:12: error: call to undeclared function 'FIELD_EX32';
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
return FIELD_EX32(id->id_isar0, ID_ISAR0, DIVIDE) != 0;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
include/hw/arm/xlnx-versal.h uses the ARMCPU structure which
is defined in the "target/arm/cpu.h" header. Include it in
order to avoid when refactoring unrelated headers:
In file included from hw/arm/xlnx-versal-virt.c:20:
include/hw/arm/xlnx-versal.h:62:23: error: array has incomplete element type 'ARMCPU' (aka 'struct ArchCPU')
ARMCPU cpu[XLNX_VERSAL_NR_ACPUS];
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/smmuv3-internal.h uses the REG32() and FIELD()
macros defined in "hw/registerfields.h". Include it in
order to avoid when refactoring unrelated headers:
In file included from ../../hw/arm/smmuv3.c:34:
hw/arm/smmuv3-internal.h:36:28: error: expected identifier
REG32(IDR0, 0x0)
^
hw/arm/smmuv3-internal.h:37:5: error: expected function body after function declarator
FIELD(IDR0, S2P, 0 , 1)
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/xilinx_zynq.c calls tswap32() which is declared
in "exec/tswap.h". Include it in order to avoid when
refactoring unrelated headers:
hw/arm/xilinx_zynq.c:103:31: error: call to undeclared function 'tswap32';
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
board_setup_blob[n] = tswap32(board_setup_blob[n]);
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/exynos4210.c calls tswap32() which is declared
in "exec/tswap.h". Include it in order to avoid when
refactoring unrelated headers:
hw/arm/exynos4210.c:499:22: error: call to undeclared function 'tswap32';
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
smpboot[n] = tswap32(smpboot[n]);
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allwinner R40 supports two USB host ports shared between a USB 2.0 EHCI
host controller and a USB 1.1 OHCI host controller. Add support for both
of them.
If machine USB support is not enabled, create unimplemented devices
for the USB memory ranges to avoid crashes when booting Linux.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240115182757.1095012-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TUSB6010 USB controller is soldered on the N800 and N810
tablets, thus is always present.
This is a migration compatibility break for the n800/n810
machines started with the '-usb none' option.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240119215106.45776-3-philmd@linaro.org
[PMM: fixed commit message typo]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the musicpal key input device to use
qemu_add_kbd_event_handler(). This lets us simplify it because we no
longer need to track whether we're in the middle of a PS/2 multibyte
key sequence.
In the conversion we move the keyboard handler registration from init
to realize, because devices shouldn't disturb the state of the
simulation by doing things like registering input handlers until
they're realized, so that device objects can be introspected
safely.
The behaviour where key-repeat is permitted for the arrow-keys only
is intentional (added in commit 7c6ce4baed), so we retain it,
and add a comment to that effect.
This is a migration compatibility break for musicpal.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20231103182750.855577-1-peter.maydell@linaro.org
error_report() strings should not include trailing newlines; remove
the newline from the error we print when devices won't fit into the
address space of the CPU.
This commit also fixes the accidental hardcoded tabs that were in
this line, since we have to touch the line anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240118131649.2726375-1-peter.maydell@linaro.org
In arm_deliver_fault() we check for whether the fault is caused
by a data abort due to an access to a FEAT_NV2 sysreg in the
memory pointed to by the VNCR. Unfortunately part of the
condition checks the wrong argument to the function, meaning
that it would spuriously trigger, resulting in some instruction
aborts being taken to the wrong EL and reported incorrectly.
Use the right variable in the condition.
Fixes: 674e534527 ("target/arm: Report VNCR_EL2 based faults correctly")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-id: 20240116165605.2523055-1-peter.maydell@linaro.org
r[id]tlb[01], [iw][id]tlb opcodes use TLB way index passed in a register
by the guest. The host uses 3 bits of the index for ITLB indexing and 4
bits for DTLB, but there's only 7 entries in the ITLB array and 10 in
the DTLB array, so a malicious guest may trigger out-of-bound access to
these arrays.
Change split_tlb_entry_spec return type to bool to indicate whether TLB
way passed to it is valid. Change get_tlb_entry to return NULL in case
invalid TLB way is requested. Add assertion to xtensa_tlb_get_entry that
requested TLB way and entry indices are valid. Add checks to the
[rwi]tlb helpers that requested TLB way is valid and return 0 or do
nothing when it's not.
Cc: qemu-stable@nongnu.org
Fixes: b67ea0cd74 ("target-xtensa: implement memory protection options")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20231215120307.545381-1-jcmvbkbc@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If socket path is too long (longer than 108 bytes), socket can't be
opened. This might lead to failure when test dir path is long enough.
Make sure socket is created in iotests.sock_dir to avoid such a case.
This commit basically aligns iotests/277 with the rest of iotests.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20240124162257.168325-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since Python 3.11 asyncio.TimeoutError is an alias for TimeoutError, but
in older versions it's not. We really have to catch asyncio.TimeoutError
here, otherwise a slow test run will fail (as has happened multiple
times on CI recently).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240125152150.42389-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're seeing timeouts for this test on CI runs (specifically for
ubuntu-20.04-s390x-all). It doesn't fail consistently, but even the
successful runs take about 27 or 28 seconds, which is not very far from
the 30 seconds timeout.
Bump the timeout a bit to make failure less likely even on this CI host.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240125165803.48373-1-kwolf@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmWyBtIACgkQ7wSWWzmN
# YhHWDgf+P9Jnlt8tCmOV6oKYrhKBbNZ5mZGmd83LpgFpn0YTdBQrauje2DziQ6u8
# KSVO6VGK/yzFLe8+xIIZXT0pFTbr8KuGhpKwqU8hq33dZtkRPUM6psirGgh2Z94K
# zWvBt/gL8DaO4ywShqwTZxhNBke1WduZpwzd/2XehmfT2SM/krpWeI2CjistQTBe
# IVbD7QioVuolh4Vq3W8On14NhwMp85Z/POh0kIAYHq5eDp2U6uYfK+1O8KHsRV4j
# Ae0Comul3YvNj9t3WPB6i1fLAzHvSfc1vO18CHKnznRONBLuhfnm9HKU7PtT/BC0
# JY59tU1lGYaQ9Ok3fDtxkaU41gkBWQ==
# =FHOd
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Jan 2024 06:59:30 GMT
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
virtio-net: correctly copy vnet header when flushing TX
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pull-loongarch-20240125
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZbINEAAKCRBAov/yOSY+
# 3yVsBACz0E5gVPc5Fp5hgQsAiiZPga/Pr565BOypIw8iAPs0RNxMMnywinFsOi1w
# A6euynZTEW9lxx5cq/O5j7yaXUmgfChcJ1OkS/IEZaUtiG25ksOIqvoeYvuROfuV
# nYrM0nuOMNwJzkOJy+qZAwGaUbyWdiqUTkP369V2xxngTneDkw==
# =1YQg
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Jan 2024 07:26:08 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240125' of https://gitlab.com/gaosong/qemu:
target/loongarch/kvm: Enable LSX/LASX extension
target/loongarch: Set cpuid CSR register only once with kvm mode
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If socket path is too long (longer than 108 bytes), socket can't be
opened. This might lead to failure when test dir path is long enough.
Make sure socket is created in iotests.sock_dir to avoid such a case.
This commit basically aligns iotests/264 with the rest of iotests.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20240125135237.189493-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
During the review of a fix for a concurrency issue in blklogwrites,
it was found that the driver needs an additional fix when enabling
multiqueue, which is a new feature introduced in QEMU 9.0, as the
driver state may be read and written by multiple threads at the same
time, which was not the case when the driver was originally written.
Fix the multi-threaded scenario by introducing a mutex to protect the
mutable fields in the driver state, and always having the mutex locked
by the current thread when accessing them. Also use the mutex and a
CoQueue to ensure that the super block is not being written to by
multiple threads concurrently and updates are properly serialized.
Additionally, add the const qualifier to a few BDRVBlkLogWritesState
pointer targets in contexts where the driver state is not written to.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Message-ID: <20240119162913.2620245-1-ari@tuxera.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When starting ioeventfd it is common practice to set the event notifier
so that the ioeventfd handler is triggered to run immediately. There may
be no requests waiting to be processed, but the idea is that if a
request snuck in then we guarantee that it will be detected.
One scenario where self-triggering the ioeventfd is necessary is when
virtio_blk_handle_output() is called from a vCPU thread before the
VIRTIO Device Status transitions to DRIVER_OK. In that case we need to
self-trigger the ioeventfd so that the kick handled by the vCPU thread
causes the vq AioContext thread to take over handling the request(s).
Fixes: b6948ab01d ("virtio-blk: add iothread-vq-mapping parameter")
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240119135748.270944-7-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We no longer rely on setting the AioContext since the block layer
IO_CODE APIs can be called from any thread. Now it's just a hint to help
block jobs and other operations co-locate themselves in a thread with
the guest I/O requests. Keep going if setting the AioContext fails.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240119135748.270944-6-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A virtio-blk device with the iothread-vq-mapping parameter has
per-virtqueue AioContexts. It is not thread-safe to process s->rq
requests in the BlockBackend AioContext since that may be different from
the virtqueue's AioContext to which this request belongs. The code
currently races and could crash.
Adapt virtio_blk_dma_restart_cb() to first split s->rq into per-vq lists
and then schedule a BH each vq's AioContext as necessary. This way
requests are safely processed in their vq's AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240119135748.270944-5-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The dataplane code is really about using ioeventfd. It's used both for
IOThreads (what we think of as dataplane) and for the core virtio-pci
code's ioeventfd feature (which is enabled by default and used when no
IOThread has been specified). Rename the code to reflect this.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240119135748.270944-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio_blk_data_plane_create() and virtio_blk_data_plane_destroy() are
actually about s->vq_aio_context[] rather than managing
dataplane-specific state.
As a prerequisite to using s->vq_aio_context[] in all code paths (even
when dataplane is not used), rename these functions to reflect that they
just manage s->vq_aio_context and call them regardless of whether or not
dataplane is in use.
Note that virtio-blk supports running with -device
virtio-blk-pci,ioevent=off where the vCPU thread enters the device
emulation code. In this mode ioeventfd is not used for virtqueue
processing. However, we still want to initialize s->vq_aio_context[] to
qemu_aio_context in that case since I/O completion callbacks will be
invoked in the main loop thread.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240119135748.270944-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The dataplane code used to be significantly different from the
non-dataplane code and therefore had a separate source file.
Over time the difference has gotten smaller because the I/O code paths
were unified. Nowadays the distinction between the VirtIOBlock and
VirtIOBlockDataPlane structs is more of an inconvenience that hinders
code simplification.
Move hw/block/dataplane/virtio-blk.c into hw/block/virtio-blk.c, merging
VirtIOBlockDataPlane's fields into VirtIOBlock.
hw/block/virtio-blk.c used VirtIOBlock->dataplane to check if
virtio_blk_data_plane_create() was successful. This is not necessary
because ->dataplane_started and ->dataplane_disabled can be used
instead. This patch makes those changes in order to drop
VirtIOBlock->dataplane.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240119135748.270944-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not
polled during nested event loops. The coroutine currently reschedules
itself in the main loop's qemu_aio_context AioContext, which is polled
during nested event loops. One known problem is that QMP device-add
calls drain_call_rcu(), which temporarily drops the BQL, leading to all
sorts of havoc like other vCPU threads re-entering device emulation code
while another vCPU thread is waiting in device emulation code with
aio_poll().
Paolo Bonzini suggested running non-coroutine QMP handlers in the
iohandler AioContext. This avoids trouble with nested event loops. His
original idea was to move coroutine rescheduling to
monitor_qmp_dispatch(), but I resorted to moving it to qmp_dispatch()
because we don't know if the QMP handler needs to run in coroutine
context in monitor_qmp_dispatch(). monitor_qmp_dispatch() would have
been nicer since it's associated with the monitor implementation and not
as general as qmp_dispatch(), which is also used by qemu-ga.
A number of qemu-iotests need updated .out files because the order of
QMP events vs QMP responses has changed.
Solves Issue #1933.
Cc: qemu-stable@nongnu.org
Fixes: 7bed89958b ("device_core: use drain_call_rcu in in qmp_device_add")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215192
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2214985
Buglink: https://issues.redhat.com/browse/RHEL-17369
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The common.qemu bash functions allow tests to interact with the QMP
monitor of a QEMU process. I spent two days trying to update 141 when
the order of the test output changed, but found it would still fail
occassionally because printf() and QMP events race with synchronous QMP
communication.
I gave up and ported 141 to the existing Python API for QMP tests. The
Python API is less affected by the order in which QEMU prints output
because it does not print all QMP traffic by default.
The next commit changes the order in which QMP messages are received.
Make 141 reliable first.
Cc: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a filter function for QMP responses that contain QEMU's
automatically generated node ids. The ids change between runs and must
be masked in the reference output.
The next commit will use this new function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-stream QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <bbee9a0a59748a8893289bf8249f568f0d587e62.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-commit QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <2cb46e37093ce793ea1604abc8bbb90f4c8e434b.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit ff32bb53 tried to get minimal struct support into the string
output visitor by just making it return "<omitted>". Unfortunately, it
forgot that the caller will still make more visitor calls for the
content of the struct.
If the struct is contained in a list, such as IOThreadVirtQueueMapping,
in the better case its fields show up as separate list entries. In the
worse case, it contains another list, and the string output visitor
doesn't support nested lists and asserts that this doesn't happen. So as
soon as the optional "vqs" field in IOThreadVirtQueueMapping is
specified, we get a crash.
This can be reproduced with the following command line:
echo "info qtree" | ./qemu-system-x86_64 \
-object iothread,id=t0 \
-blockdev null-co,node-name=disk \
-device '{"driver": "virtio-blk-pci", "drive": "disk",
"iothread-vq-mapping": [{"iothread": "t0", "vqs": [0]}]}' \
-monitor stdio
Fix the problem by counting the nesting level of structs and ignoring
any visitor calls for values (apart from start/end_struct) while we're
not on the top level.
Lists nested directly within lists remain unimplemented, as we don't
currently have a use case for them.
Fixes: ff32bb5347
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2069
Reported-by: Aihua Liang <aliang@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240109181717.42493-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a bug in the blklogwrites driver pertaining to logging "write
zeroes" operations, causing log corruption. This can be easily observed
by setting detect-zeroes to something other than "off" for the driver.
The issue is caused by a concurrency bug pertaining to the fact that
"write zeroes" operations have to be logged in two parts: first the log
entry metadata, then the zeroed-out region. While the log entry
metadata is being written by bdrv_co_pwritev(), another operation may
begin in the meanwhile and modify the state of the blklogwrites driver.
This is as intended by the coroutine-driven I/O model in QEMU, of
course.
Unfortunately, this specific scenario is mishandled. A short example:
1. Initially, in the current operation (#1), the current log sector
number in the driver state is only incremented by the number of sectors
taken by the log entry metadata, after which the log entry metadata is
written. The current operation yields.
2. Another operation (#2) may start while the log entry metadata is
being written. It uses the current log position as the start offset for
its log entry. This is in the sector right after the operation #1 log
entry metadata, which is bad!
3. After bdrv_co_pwritev() returns (#1), the current log sector
number is reread from the driver state in order to find out the start
offset for bdrv_co_pwrite_zeroes(). This is an obvious blunder, as the
offset will be the sector right after the (misplaced) operation #2 log
entry, which means that the zeroed-out region begins at the wrong
offset.
4. As a result of the above, the log is corrupt.
Fix this by only reading the driver metadata once, computing the
offsets and sizes in one go (including the optional zeroed-out region)
and setting the log sector number to the appropriate value for the next
operation in line.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Cc: qemu-stable@nongnu.org
Message-ID: <20240109184646.1128475-1-megari@gmx.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"Since X.Y" is not recognized as a tagged section, and therefore not
formatted as such in generated documentation. Fix by adding the
required colon.
Previously fixed in commit 433a4fdc42 (qapi: Fix malformed "Since:"
section tags)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
docs/devel/qapi-code-gen demands that the "second and subsequent lines
of sections other than "Example"/"Examples" should be indented".
Commit a937b6aa73 (qapi: Reformat doc comments to conform to current
conventions) missed a few instances, and a few more have crept in
since. Indent them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit e050e42678 (qapi: Use explicit bulleted lists) added list
markup to correct bad rendering:
A JSON block comment like this:
Returns: nothing on success
If @node is not a valid block device, DeviceNotFound
If @name is not found, GenericError with an explanation
renders like this:
Returns: nothing on success If node is not a valid block device,
DeviceNotFound If name is not found, GenericError with an explanation
because whitespace is not significant.
Use an actual bulleted list, so that the formatting is correct.
It missed a few instances. Commit a937b6aa73 (qapi: Reformat doc
comments to conform to current conventions) then reflowed them.
Revert the reflowing, and add list markup.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
docs/interop/bitmaps.rst uses references like
`qemu-qmp-ref <qemu-qmp-ref.html>`_
`query-block <qemu-qmp-ref.html#index-query_002dblock>`_
to refer to and into docs/interop/qemu-qmp-ref.rst.
Clean up the former: use :doc:`qemu-qmp-ref`.
I don't know how to clean up the latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Conversion of docs/devel/qapi-code-gen.txt to ReST left several
dangling references behind. Fix them to point to
docs/devel/qapi-code-gen.rst.
Fixes: f7aa076dbd (docs: convert qapi-code-gen.txt to ReST)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Deletion of docs/interop/qmp-intro.txt left two dangling references
behind. Replace them by references to docs/interop/qmp-spec.rst.
Fixes: 0ec4468f23 (docs/interop: Delete qmp-intro.txt)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We reserved type names ending with 'Kind' because a simple union
'SomeSimpleUnion' generated both a struct type SomeSimpleUnion and an
enum type SomeSimpleUnionKind. Gone since commit 4e99f4b12c (qapi:
Drop simple unions). The commit neglected to update the documentation
not to reserve type names ending with 'Kind'. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231221145727.835905-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CSR cpuid register is used for routing irq to different vcpus, its
value is kept unchanged since poweron. So it is not necessary to
set CSR cpuid register after system resets, and it is only set at
vm creation stage.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240115085121.180524-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
When HASH_REPORT is negotiated, the guest_hdr_len might be larger than
the size of the mergeable rx buffer header. Using
virtio_net_hdr_mrg_rxbuf during the header swap might lead a stack
overflow in this case. Fixing this by using virtio_net_hdr_v1_hash
instead.
Reported-by: Xiao Lei <leixiao.nop@zju.edu.cn>
Cc: Yuri Benditovich <yuri.benditovich@daynix.com>
Cc: qemu-stable@nongnu.org
Cc: Mauro Matteo Cascella <mcascell@redhat.com>
Fixes: CVE-2023-6693
Fixes: e22f0603fb ("virtio-net: reference implementation of hash report")
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
These rather complex functions have never been used since they've been
introduced in 2012, so looks like they are not really useful for QEMU.
And since the static normalize_uri_path() function is also only used by
uri_resolve(), we can remove that function now, too.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240123182247.432642-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We're still seeing timeouts in qtests that use a TCG payload with TCI
on a slow k8s runner:
https://gitlab.com/qemu-project/qemu/-/jobs/5990992722
So we should bump the timeout of cdrom-test to see whether that
fixes the issue.
Now, cdrom-test, as bios-tables-test, pxe-test and vmgenid-test use
the boot_sector_test() function for running a TCG payload. That
function already uses an internal timeout of 600 seconds with
the remark that the test could be slow with TCI.
Thus from the outer meson test runner side, we should not use less
than 600 seconds as timeout values for these tests. Let's bump them
on the meson side to 610 seconds so that the tests themselves can
run with their internal 600 seconds timeout and have some additional
seconds on top for reporting the outcome.
Message-ID: <20240124084412.465638-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test-iov code uses usleep() with small values (<= 30) in some
nested loops with many iterations. This causes a small delay on OSes
like Linux that have a precise sleeping mechanism, but on systems
like NetBSD and OpenBSD, each usleep() call takes multiple microseconds,
which then sum up in a total test time of multiple minutes!
Looking at the code, the usleep() does not really seem to be necessary
here - if not enough data could be send, we should simply always use
select() to wait 'til we can send more. Thus remove the usleep() and
re-arrange the code a little bit to make it more clear what is going
on here.
Suggested-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240122153347.71654-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A typo in sizeof_reg put the registers at the wrong offset.
Simplify the expressions to use positive addresses from the
start of uc_mcontext instead of negative addresses from the
end of uc_mcontext.
Reported-by: Vineet Gupta <vineetg@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using fleecing backup like in [0] on a qcow2 image (with metadata
preallocation) can lead to the following assertion failure:
> bdrv_co_do_block_status: Assertion `!(ret & BDRV_BLOCK_ZERO)' failed.
In the reproducer [0], it happens because the BDRV_BLOCK_RECURSE flag
will be set by the qcow2 driver, so the caller will recursively check
the file child. Then the BDRV_BLOCK_ZERO set too. Later up the call
chain, in bdrv_co_do_block_status() for the snapshot-access driver,
the assertion failure will happen, because both flags are set.
To fix it, clear the recurse flag after the recursive check was done.
In detail:
> #0 qcow2_co_block_status
Returns 0x45 = BDRV_BLOCK_RECURSE | BDRV_BLOCK_DATA |
BDRV_BLOCK_OFFSET_VALID.
> #1 bdrv_co_do_block_status
Because of the data flag, bdrv_co_do_block_status() will now also set
BDRV_BLOCK_ALLOCATED. Because of the recurse flag,
bdrv_co_do_block_status() for the bdrv_file child will be called,
which returns 0x16 = BDRV_BLOCK_ALLOCATED | BDRV_BLOCK_OFFSET_VALID |
BDRV_BLOCK_ZERO. Now the return value inherits the zero flag.
Returns 0x57 = BDRV_BLOCK_RECURSE | BDRV_BLOCK_DATA |
BDRV_BLOCK_OFFSET_VALID | BDRV_BLOCK_ALLOCATED | BDRV_BLOCK_ZERO.
> #2 bdrv_co_common_block_status_above
> #3 bdrv_co_block_status_above
> #4 bdrv_co_block_status
> #5 cbw_co_snapshot_block_status
> #6 bdrv_co_snapshot_block_status
> #7 snapshot_access_co_block_status
> #8 bdrv_co_do_block_status
Return value is propagated all the way up to here, where the assertion
failure happens, because BDRV_BLOCK_RECURSE and BDRV_BLOCK_ZERO are
both set.
> #9 bdrv_co_common_block_status_above
> #10 bdrv_co_block_status_above
> #11 block_copy_block_status
> #12 block_copy_dirty_clusters
> #13 block_copy_common
> #14 block_copy_async_co_entry
> #15 coroutine_trampoline
[0]:
> #!/bin/bash
> rm /tmp/disk.qcow2
> ./qemu-img create /tmp/disk.qcow2 -o preallocation=metadata -f qcow2 1G
> ./qemu-img create /tmp/fleecing.qcow2 -f qcow2 1G
> ./qemu-img create /tmp/backup.qcow2 -f qcow2 1G
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/disk.qcow2 \
> --blockdev qcow2,node-name=node1,file.driver=file,file.filename=/tmp/fleecing.qcow2 \
> --blockdev qcow2,node-name=node2,file.driver=file,file.filename=/tmp/backup.qcow2 \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "blockdev-add", "arguments": { "driver": "copy-before-write", "file": "node0", "target": "node1", "node-name": "node3" } }
> {"execute": "blockdev-add", "arguments": { "driver": "snapshot-access", "file": "node3", "node-name": "snap0" } }
> {"execute": "blockdev-backup", "arguments": { "device": "snap0", "target": "node1", "sync": "full", "job-id": "backup0" } }
> EOF
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-id: 20240116154839.401030-1-f.ebner@proxmox.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Coroutine may be pooled even after COROUTINE_TERMINATE if
CONFIG_COROUTINE_POOL is enabled and fake stack should be saved in
such a case to keep AddressSanitizerUseAfterReturn working. Even worse,
I'm seeing stack corruption without fake stack being saved.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240117-asan-v2-1-26f9e1ea6e72@daynix.com>
Section 10.3 of the Hexagon V73 Programmer's Reference Manual
A duplex is encoded as a 32-bit instruction with bits [15:14] set to 00.
The sub-instructions that comprise a duplex are encoded as 13-bit fields
in the duplex.
Create a decoder for each subinstruction class (a, l1, l2, s1, s2).
Extend gen_trans_funcs.py to handle all instructions rather than
filter by instruction class.
There is a g_assert_not_reached() in decode_insns() in decode.c to
verify we never try to use the old decoder on 16-bit instructions.
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240115221443.365287-3-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
The Decodetree Specification can be found here
https://www.qemu.org/docs/master/devel/decodetree.html
Covers all 32-bit instructions, including HVX
We generate separate decoders for each instruction class. The reason
will be more apparent in the next patch in this series.
We add 2 new scripts
gen_decodetree.py Generate the input to decodetree.py
gen_trans_funcs.py Generate the trans_* functions used by the
output of decodetree.py
Since the functions generated by decodetree.py take DisasContext * as an
argument, we add the argument to a couple of functions that didn't need
it previously. We also set the insn field in DisasContext during decode
because it is used by the trans_* functions.
There is a g_assert_not_reached() in decode_insns() in decode.c to
verify we never try to use the old decoder on 32-bit instructions
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240115221443.365287-2-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
The generators are generally a bunch of Python if-then-else
statements based on the regtype and regid. Encapsulate regtype/regid
into a class hierarchy. Clients lookup the register and invoke
methods.
This has several advantages for making the code easier to read,
understand, and maintain
- The class name makes it more clear what the operand does
- All the methods for a given type of operand are together
- Don't need hex_common.bad_register
If a regtype/regid is missing, the lookup in hex_common.get_register
will fail
- We can remove the functions in hex_common that use regtype/regid
(e.g., is_read)
This patch creates the class hierarchy in hex_common and converts
gen_tcg_funcs.py. The other scripts will be converted in subsequent
patches in this series.
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20231210220712.491494-3-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Currently, the register number (MuN) for modifier registers is the
modifier register number rather than the index into hex_gpr. This
patch changes MuN to the hex_gpr index, which is consistent with
the handling of control registers.
Note that HELPER(fcircadd) needs the CS register corresponding to the
modifier register specified in the instruction. We create a TCGv
variable "CS" to hold the value to pass to the helper.
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <20231210220712.491494-2-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
When compiling qemu with system KVM mode for LoongArch, header files
in directory linux-headers/asm-loongarch should be used firstly.
Otherwise it fails to find kvm.h on system with old glibc, since
latest kernel header files are not installed.
This patch adds linux_arch definition for LoongArch system so that
header files in directory linux-headers/asm-loongarch can be included.
Fixes: 714b03c125 ("target/loongarch: Add loongarch kvm into meson build")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240116013952.264474-1-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Some ELF files really do have segments of zero size, e.g.:
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
RISCV_ATTRIBUT 0x00000000000025b8 0x0000000000000000 0x0000000000000000
0x000000000000003e 0x0000000000000000 R 0x1
LOAD 0x0000000000001000 0x0000000080200000 0x0000000080200000
0x00000000000001d1 0x00000000000001d1 R E 0x1000
LOAD 0x00000000000011d1 0x00000000802001d1 0x00000000802001d1
0x0000000000000e37 0x0000000000000e37 RW 0x1000
LOAD 0x0000000000000120 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x1000
The current logic does not check for this condition, resulting in
the incorrect assignment of 'lowaddr' as zero.
There is already a piece of codes inside the segment traversal loop
that checks for zero-sized loadable segments for not creating empty
ROM blobs. Let's move this check to the beginning of the loop to
cover both scenarios.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240116155049.390301-1-bmeng@tinylab.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Even though the BLAST command isn't fully implemented in QEMU, the DMA_STAT_BCMBLT
bit should be set after the command has been issued to indicate that the command
has completed.
This fixes an issue with the DC390 DOS driver which issues the BLAST command as
part of its normal error recovery routine at startup, and otherwise sits in a
tight loop waiting for DMA_STAT_BCMBLT to be set before continuing.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The setting of DMA_STAT_DONE at the end of a DMA transfer can be configured to
generate an interrupt, however the Linux driver manually checks for DMA_STAT_DONE
being set and if it is, considers that a DMA transfer has completed.
If DMA_STAT_DONE is set but the ESP device isn't indicating an interrupt then
the Linux driver considers this to be a spurious interrupt. However this can
occur in QEMU as there is a delay between the end of DMA transfer where
DMA_STAT_DONE is set, and the ESP device raising its completion interrupt.
This appears to be an incorrect assumption in the Linux driver as the ESP and
PCI DMA interrupt sources are separate (and may not be raised exactly
together), however we can work around this by synchronising the setting of
DMA_STAT_DONE at the end of a DMA transfer with the ESP completion interrupt.
In conjunction with the previous commit Linux is now able to correctly boot
from an am53c974 PCI SCSI device on the hppa C3700 machine without emitting
"iget: checksum invalid" and "Spurious irq, sreg=10" errors.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The am53c974/dc390 PCI interrupt has two separate sources: the first is from the
internal ESP device, and the second is from the PCI DMA transfer logic.
Update the ESP interrupt handler so that it sets DMA_STAT_SCSIINT rather than
driving the PCI IRQ directly, and introduce a new esp_pci_update_irq() function
to generate the correct PCI IRQ level. In particular this fixes spurious interrupts
being generated by setting DMA_STAT_DONE at the end of a transfer if DMA_CMD_INTE_D
isn't set in the DMA_CMD register.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The current code in esp_pci_dma_memory_rw() sets the DMA address to the value
of the DMA_SPA (Starting Physical Address) register which is incorrect: this
means that for each callback from the SCSI layer the DMA address is set back
to the starting address.
In the case where only a single SCSI callback occurs (currently for transfer
lengths < 128kB) this works fine, however for larger transfers the DMA address
wraps back to the initial starting address, corrupting the buffer holding the
data transferred to the guest.
Fix esp_pci_dma_memory_rw() to use the DMA_WAC (Working Address Counter) for
the DMA address which is correctly incremented across multiple SCSI layer
transfers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The tcg_cpu_FOO() names are x86 specific, so rename
them as x86_tcg_cpu_FOO() (as other names in this file)
to ease navigating the code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20240111120221.35072-5-philmd@linaro.org>
Add an update buffer where all block updates are staged.
Flush or discard updates properly, so we should never see
half-completed block writes in pflash storage.
Drop a bunch of FIXME comments ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240108160900.104835-4-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Move the offset calculation, do it once at the start of the function and
let the 'p' variable point directly to the memory location which should
be updated. This makes it simpler to update other buffers than
pfl->storage in an upcoming patch. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240108160900.104835-2-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is a follow-up on commit 89965db43c "hw/isa/piix3: Avoid Xen-specific
variant of piix3_write_config()" which introduced
piix_intx_routing_notifier_xen(). This function is implemented in board code but
accesses the PCI configuration space of the PIIX ISA function to determine the
PCI interrupt routes. Avoid this by reusing pci_device_route_intx_to_irq() which
makes piix_intx_routing_notifier_xen() more device-agnostic.
One remaining improvement would be making piix_intx_routing_notifier_xen()
agnostic towards the number of PCI interrupt routes and move it to xen-hvm.
This might be useful for possible Q35 Xen efforts but remains a future exercise
for now.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240107231623.5282-1-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The 16MiB flash device is only used by the deprecated shix machine.
Its code it old and unmaintained, and has never been adapted to the
QOM architecture. It still contains debug statements and uses global
variables. It is time to deprecate it.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240109083053.2581588-3-sam@rfc1149.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The shix machine has been designed and used at Télécom Paris from 2003
to 2010. It had been added to QEMU in 2005 and has not been maintained
since. Since nobody is using the physical board anymore nor interested
in maintaining the QEMU port, it is time to deprecate it.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240109083053.2581588-2-sam@rfc1149.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
pmu_init() register its event checking the pm_event::supported()
handler. For INST_RETIRED, the event is only registered and the
bit enabled in the PMU Common Event Identification register when
icount is enabled as ICOUNT_PRECISE.
PMU events are TCG-only, hardware accelerators handle them
directly. Unfortunately we register the events in non-TCG builds,
leading to linking error such:
ld: Undefined symbols:
_icount_to_ns, referenced from:
_instructions_ns_per in target_arm_helper.c.o
clang: error: linker command failed with exit code 1 (use -v to see invocation)
As a kludge, give a hint to the compiler by asserting the
pm_event::get_count() and pm_event::ns_per_count() handler will
only be called under this icount mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-5-philmd@linaro.org>
Except helper_load_pcc(), all helpers from sys_helper.c
are system-emulation specific. In preparation of restricting
sys_helper.c to system emulation, extract helper_load_pcc()
to clk_helper.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231207105426.49339-2-philmd@linaro.org>
Since previous commit, tb_invalidate_phys_page() is not used
anymore in system emulation. Make it static for user emulation
and remove its public declaration in "exec/translate-all.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231130205600.35727-1-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Commit e3f7c801f1 introduced the TCGCPUOps::debug_check_breakpoint()
handler, and commit 10c37828b2 "moved breakpoint recognition outside
of translation", so "we no longer need to flush any TBs when changing
BPs".
The last target using tb_invalidate_phys_addr() was converted to the
debug_check_breakpoint(), so this function is now unused. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231130203241.31099-1-philmd@linaro.org>
Don't embed ibreak exception generation into TB and don't invalidate TB
on ibreak address change. Add CPUBreakpoint pointers to xtensa
CPUArchState, use cpu_breakpoint_insert/cpu_breakpoint_remove_by_ref to
manage ibreak breakpoints and provide TCGCPUOps::debug_check_breakpoint
callback that recognizes valid instruction breakpoints.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231130171920.3798954-2-jcmvbkbc@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
'can_do_io' is specific to TCG. It was added to other
accelerators in 626cf8f4c6 ("icount: set can_do_io outside
TB execution"), then likely copy/pasted in commit c97d6d2cdf
("i386: hvf: add code base from Google's QEMU repository").
Having it set in non-TCG code is confusing, so remove it from
QTest / HVF / KVM.
Fixes: 626cf8f4c6 ("icount: set can_do_io outside TB execution")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231129205037.16849-1-philmd@linaro.org>
Both cryptodev_backend_set_throttle() and CryptoDevBackendClass::init()
can set their Error** argument. Do not ignore them, return early
on failure. Without that, running into another failure trips
error_setv()'s assertion. Use the ERRP_GUARD() macro as suggested
in commit ae7c80a7bd ("error: New macro ERRP_GUARD()").
Cc: qemu-stable@nongnu.org
Fixes: e7a775fd9f ("cryptodev: Account statistics")
Fixes: 2580b452ff ("cryptodev: support QoS")
Reviewed-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231120150418.93443-1-philmd@linaro.org>
This conversion is pretty straight-forward. Standardized some formatting
so the +0 and +4 offset cases can recycle the same message.
Signed-off-by: Daniel Hoffman <dhoff749@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231118231129.2840388-1-dhoff749@gmail.com>
[PMD: Fixed few string formats]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since the pkgsrc-2023Q3 release [*], the py-expat package has been
merged into the base 'python' package:
- Several packages have been folded into base packages. While the
result is simpler, those updating may need to force-remove the
secondary packages, depending on the update method. When doing
make replace, one has to pkg_delete -f the secondary packages.
pkgin handles at least the python packages correctly, removing the
split package when updating python. Specific packages and the
former packages now included:
* cairo: cairo-gobject
* python: py-cElementTree py-curses py-cursespanel py-expat
py-readline py-sqlite3
Remove py311-expat from the package list in order to avoid:
### Installing packages ...
processing remote summary (http://cdn.NetBSD.org/pub/pkgsrc/packages/NetBSD/amd64/9.3/All)...
database for http://cdn.NetBSD.org/pub/pkgsrc/packages/NetBSD/amd64/9.3/All is up-to-date
py311-expat is not available in the repository
...
calculating dependencies.../py311-expat is not available in the repository
pkg_install error log can be found in /var/db/pkgin/pkg_install-err.log
[*] https://mail-index.netbsd.org/netbsd-announce/2024/01/01/msg000360.html
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2109
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240117140746.23511-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ISM devices are sensitive to manipulation of the IOMMU, so the ISM device
needs to be reset before the vfio-pci device is reset (triggering a full
UNMAP). In order to ensure this occurs, trigger ISM device resets from
subsystem_reset before triggering the PCI bus reset (which will also
trigger vfio-pci reset). This only needs to be done for ISM devices
which were enabled for use by the guest.
Further, ensure that AIF is disabled as part of the reset event.
Fixes: ef1535901a ("s390x: do a subsystem reset before the unprotect on reboot")
Fixes: 03451953c7 ("s390x/pci: reset ISM passthrough devices on shutdown and system reset")
Reported-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-4-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Typically we refresh the host fh during CLP enable, however it's possible
that the device goes through multiple reset events before the guest
performs another CLP enable. Let's handle this for now by refreshing the
host handle from vfio before disabling aif.
Fixes: 03451953c7 ("s390x/pci: reset ISM passthrough devices on shutdown and system reset")
Reported-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-3-mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use a flag to keep track of whether AIF is currently enabled. This can be
used to avoid enabling/disabling AIF multiple times as well as to determine
whether or not it should be disabled during reset processing.
Fixes: d0bc7091c2 ("s390x/pci: enable adapter event notification for interpreted devices")
Reported-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-2-mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By default, the timeout to receive any specified event from the QEMU VM is 60
seconds set by the python avocado test framework. Please see event_wait() and
events_wait() in python/qemu/machine/machine.py. If the matching event is not
triggered within that interval, an asyncio.TimeoutError is generated. Since the
timeout for the bits avocado test is 200 secs, we need to make event_wait()
timeout of the same value as well so that an early timeout is not triggered by
the avocado framework.
CC: peter.maydell@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2077
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240117042556.3360190-1-anisinha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
j is used while loading an ELF file to byteswap segments'
data. If data is larger than 2GB an overflow may happen.
So j should be elf_word.
This commit fixes a minor bug: it's unlikely anybody is trying to
load ELF files with 2GB+ segments for wrong-endianness targets,
but if they did, it wouldn't work correctly.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: 7ef295ea5b ("loader: Add data swap option to load-elf")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's found that some of the CPU type names in the array of valid
CPU types are invalid because their corresponding classes aren't
registered, as reported by Peter Maydell.
[gshan@gshan build]$ ./qemu-system-arm -machine virt -cpu cortex-a9
qemu-system-arm: Invalid CPU model: cortex-a9
The valid models are: cortex-a7, cortex-a15, (null), (null), (null),
(null), (null), (null), (null), (null), (null), (null), (null), max
Fix it by consolidating the array of valid CPU types. After it's
applied, we have the following output when TCG is enabled.
[gshan@gshan build]$ ./qemu-system-arm -machine virt -cpu cortex-a9
qemu-system-arm: Invalid CPU model: cortex-a9
The valid models are: cortex-a7, cortex-a15, max
[gshan@gshan build]$ ./qemu-system-aarch64 -machine virt -cpu cortex-a9
qemu-system-aarch64: Invalid CPU model: cortex-a9
The valid models are: cortex-a7, cortex-a15, cortex-a35, cortex-a55,
cortex-a72, cortex-a76, cortex-a710, a64fx, neoverse-n1, neoverse-v1,
neoverse-n2, cortex-a53, cortex-a57, max
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2084
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20240111051054.83304-1-gshan@redhat.com
Fixes: fa8c617791 ("hw/arm/virt: Check CPU type in machine_run_board_init()")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
make check-tcg fails on Fedora with:
vtimer.c:9:10: fatal error: inttypes.h: No such file or directory
Fedora has a minimal aarch64 cross-compiler, which satisfies the
configure checks, so it's chosen instead of the dockerized one.
There is no cross-version of inttypes.h, however.
Fix by using stdint.h instead. The test does not require anything
from inttypes.h anyway.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240108125030.58569-1-iii@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On LoongArch kvm mode if transparent huge page wants to be enabled, base
address and size of memslot from both HVA and GPA view. And LoongArch
supports both 4K and 16K page size with Linux kernel, so transparent huge
page size is calculated from real page size rather than hardcoded size.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240115073244.174155-1-maobibo@loongson.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
uintptr_t, or unsigned long which is equivalent on Linux I32LP64 systems,
is an unsigned type and there is no need to further cast to __u64 which is
another unsigned integer type; widening casts from unsigned integers
zero-extend the value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For PC-relative translation blocks, env->eip changes during the
execution of a translation block, Therefore, QEMU must be able to
recover an instruction's PC just from the TranslationBlock struct and
the instruction data with. Because a TB will not span two pages, QEMU
stores all the low bits of EIP in the instruction data and replaces them
in x86_restore_state_to_opc. Bits 12 and higher (which may vary between
executions of a PCREL TB, since these only use the physical address in
the hash key) are kept unmodified from env->eip. The assumption is that
these bits of EIP, unlike bits 0-11, will not change as the translation
block executes.
Unfortunately, this is incorrect when the CS base is not aligned to a page.
Then the linear address of the instructions (i.e. the one with the
CS base addred) indeed will never span two pages, but bits 12+ of EIP
can actually change. For example, if CS base is 0x80262200 and EIP =
0x6FF4, the first instruction in the translation block will be at linear
address 0x802691F4. Even a very small TB will cross to EIP = 0x7xxx,
while the linear addresses will remain comfortably within a single page.
The fix is simply to use the low bits of the linear address for data[0],
since those don't change. Then x86_restore_state_to_opc uses tb->cs_base
to compute a temporary linear address (referring to some unknown
instruction in the TB, but with the correct values of bits 12 and higher);
the low bits are replaced with data[0], and EIP is obtained by subtracting
again the CS base.
Huge thanks to Mark Cave-Ayland for the image and initial debugging,
and to Gitlab user @kjliew for help with bisecting another occurrence
of (hopefully!) the same bug.
It should be relatively easy to write a testcase that performs MMIO on
an EIP with different bits 12+ than the first instruction of the translation
block; any help is welcome.
Fixes: e3a79e0e87 ("target/i386: Enable TARGET_TB_PCREL", 2022-10-11)
Cc: qemu-stable@nongnu.org
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Richard Henderson <richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1759
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1964
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2012
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With PCREL, we have a page-relative view of EIP, and an
approximation of PC = EIP+CSBASE that is good enough to
detect page crossings. If we try to recompute PC after
masking EIP, we will mess up that approximation and write
a corrupt value to EIP.
We already handled masking properly for PCREL, so the
fix in b5e0d5d2 was only needed for the !PCREL path.
Cc: qemu-stable@nongnu.org
Fixes: b5e0d5d22f ("target/i386: Fix 32-bit wrapping of pc/eip computation")
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240101230617.129349-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The LuringState typedef is defined twice, in include/block/raw-aio.h and
block/io_uring.c. Move it in include/block/aio.h, which is included
everywhere the typedef is needed, since include/block/aio.h already has
to define the forward reference to the struct.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows passing the KVM device node to use as a file
descriptor via /dev/fdset/XX. Passing the device node to
use as a file descriptor allows running qemu unprivileged
even when the user running qemu is not in the kvm group
on distributions where access to /dev/kvm is gated behind
membership of the kvm group (as long as the process invoking
qemu is able to open /dev/kvm and passes the file descriptor
to qemu).
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Message-ID: <20231021134015.1119597-1-daan.j.demeyer@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jazz Jackrabbit has a very unusual VGA setup, where it uses odd/even mode
with 256-color graphics. Probably, it wants to use fast VRAM-to-VRAM
copies without having to store 4 copies of the sprites as needed in mode
X, one for each mod-4 alignment; odd/even mode simplifies the code a
lot if it's okay to place on a 160-pixels horizontal grid.
At the same time, because it wants to use double buffering (a la "mode X")
it uses byte mode, not word mode as is the case in text modes. In order
to implement the combination of odd/even mode (plane number comes from
bit 0 of the address) and byte mode (use all bytes of VRAM, whereas word
mode only uses bytes 0, 2, 4,... on each of the four planes), we need
to separate the effect on the plane number from the effect on the address.
Implementing the modes properly is a mess in QEMU, because it would
change the layout of VRAM and break migration. As an approximation,
shift right when the CPU accesses memory instead of shifting left when
the CRT controller reads it. A hack is needed in order to write font data
properly (see comment in the code), but it works well enough for the game.
Because doubleword and chain4 modes are now independent, chain4 does not
assert anymore that the address is in range. Instead it just returns
all ones and discards writes, like other modes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jazz Jackrabbit uses odd/even mode with 256-color graphics. This is
probably so that it can do very fast blitting with a decent resolution
(two pixels, compared to four pixels for "regular" mode X).
Accesses still use all planes (reads go to the latches and the game uses
read mode 1 so that the CPU always gets 0xFF; writes use the plane mask
register because the game sets bit 2 of the sequencer's memory mode
register). For this to work, QEMU needs to use the code for latched
memory accesses in odd/even mode. The only difference between odd/even
mode and "regular" planar mode is how the plane is computed in read mode
0, and how the planes are masked if the aforementioned bit 2 is reset.
It is almost enough to fix the game. You also need to honor byte/word
mode selection, which is done in the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next patch will reuse latched memory access in text modes. Start with
a patch that moves the latched access code out of the "if".
Best reviewed with "git diff -b".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements smooth scrolling, as used for example by Commander Keen
and Second Reality.
Unfortunately, this is not enough to avoid tearing in Commander Keen,
because sometimes the wrong start address is used for a frame.
On real EGA, the panning register is sampled on every line, while
the display start is latched for the next frame at the start of the
vertical retrace. On real VGA, the panning register is also latched,
but at the end of the vertical retrace. It looks like Keen exploits
this by only waiting for horizontal retrace when setting the display
start, but implementing it breaks the 256-color Keen games...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows setting the start address to a high value, and reading the
bottom of the screen from the beginning of VRAM. Commander Keen 4
("Goodbye, Galaxy!") relies on this behavior.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next patches will introduce more parameters that cause a full
refresh. Instead of adding arguments to get_offsets and lines to
update_basic_params, do everything through a struct.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The constant-expression bswap is provided by const_le32(), and GET_PLANE()
can also be implemented using cpu_to_le32(). Remove the custom macros in
vga.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
target/hppa qemu v8.2 regression fixes
There were some regressions introduced with Qemu v8.2 on the hppa/hppa64
target, e.g.:
- 32-bit HP-UX crashes on B160L (32-bit) machine
- NetBSD boot failure due to power button in page zero
- NetBSD FPU detection failure
- OpenBSD 7.4 boot failure
This patch series fixes those known regressions and additionally:
- allows usage of the max. 3840MB of memory (instead of 3GB),
- adds support for the qemu --nodefaults option (to debug other devices)
This patch set will not fix those known (non-regression) bugs:
- HP-UX and NetBSD still fail to boot on the new 64-bit C3700 machine
- Linux kernel will still fail to boot on C3700 as long as kernel modules are used.
Changes v2->v3:
- Added comment about Figures H-10 and H-11 in the parisc2.0 spec
in patch which calculate PDC address translation if PSW.W=0
- Introduce and use hppa_set_ior_and_isr()
- Use drive_get_max_bus(IF_SCSI), nd_table[] and serial_hd() to check
if default devices should be created
- Added Tested-by and Reviewed-by tags
Changes v1->v2:
- fix OpenBSD boot with SeaBIOS v15 instead of v14
- commit message enhancements suggested by BALATON Zoltan
- use uint64_t for ram_max in patch #1
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaImPQAKCRD3ErUQojoP
# X2C5AP9fbIkCni45JU6KC6OmFsCbAReRQCPwLO+MzR8/us2ywgD+PsGxSBk8ASxM
# nqtv3J9JC3i+XSnbtwLV+qChnO+IXwc=
# =FAMY
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 13 Jan 2024 05:57:17 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 15
target/hppa: Fix IOR and ISR on error in probe
target/hppa: Fix IOR and ISR on unaligned access trap
target/hppa: Export function hppa_set_ior_and_isr()
target/hppa: Avoid accessing %gr0 when raising exception
hw/hppa: Move software power button address back into PDC
target/hppa: Fix PDC address translation on PA2.0 with PSW.W=0
hw/pci-host/astro: Add missing astro & elroy registers for NetBSD
hw/hppa/machine: Disable default devices with --nodefaults option
hw/hppa/machine: Allow up to 3840 MB total memory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Migration pull request 2nd batch for 9.0
- Het's cleanup on migration qmp command paths
- Fabiano's migration cleanups and test improvements
- Fabiano's patch to re-enable multifd-cancel test
- Peter's migration doc reorganizations
- Nick Briggs's fix for Solaries build on rdma
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZaX1PhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wZSzwEAq6sp/ylNHLzNoMdWL28JLqCsb4DPYH2i
# u7XgYgT1qDAA/0vwoe4a5uFn1aaGCS+2d2syjJ8kOE7h+eZrbK520jsA
# =1zUG
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 16 Jan 2024 03:17:18 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240116-pull-request' of https://gitlab.com/peterx/qemu:
migration/rdma: define htonll/ntohll only if not predefined
docs/migration: Further move virtio to be feature of migration
docs/migration: Further move vfio to be feature of migration
docs/migration: Organize "Postcopy" page
docs/migration: Split "dirty limit"
docs/migration: Split "Postcopy"
docs/migration: Split "Debugging" and "Firmware"
docs/migration: Split "Backwards compatibility" separately
docs/migration: Convert virtio.txt into rST
docs/migration: Create index page
docs/migration: Create migration/ directory
tests/qtest: Re-enable multifd cancel test
tests/qtest/migration: Use the new migration_test_add
tests/qtest/migration: Add a wrapper to print test names
tests/qtest/migration: Print migration incoming errors
migration: Report error in incoming migration
migration/multifd: Change multifd_pages_init argument
migration/multifd: Remove QEMUFile from where it is not needed
migration/multifd: Remove MultiFDPages_t::packet_num
migration: Simplify initial conditionals in migration for better readability
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When variables are used without being initialized, there is potential
to take advantage of data that was pre-existing on the stack from an
earlier call, to drive an exploit.
It is good practice to always initialize variables, and the compiler
can warn about flaws when -Wuninitialized is present. This warning,
however, is by no means foolproof with its output varying depending
on compiler version and which optimizations are enabled.
The -ftrivial-auto-var-init option can be used to tell the compiler
to always initialize all variables. This increases the security and
predictability of the program, closing off certain attack vectors,
reducing the risk of unsafe memory disclosure.
While the option takes several possible values, using 'zero' is
considered to be the option that is likely to lead to semantically
correct or safe behaviour[1]. eg sizes/indexes are not likely to
lead to out-of-bounds accesses when initialized to zero. Pointers
are less likely to point something useful if initialized to zero.
Even with -ftrivial-auto-var-init=zero set, GCC will still issue
warnings with -Wuninitialized if it discovers a problem, so we are
not loosing diagnostics for developers, just hardening runtime
behaviour and making QEMU behave more predictably in case of hitting
bad codepaths.
[1] https://lists.llvm.org/pipermail/cfe-dev/2020-April/065221.html
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240103123414.2401208-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To quote wikipedia:
"Return-oriented programming (ROP) is a computer security exploit
technique that allows an attacker to execute code in the presence
of security defenses such as executable space protection and code
signing.
In this technique, an attacker gains control of the call stack to
hijack program control flow and then executes carefully chosen
machine instruction sequences that are already present in the
machine's memory, called "gadgets". Each gadget typically ends in
a return instruction and is located in a subroutine within the
existing program and/or shared library code. Chained together,
these gadgets allow an attacker to perform arbitrary operations
on a machine employing defenses that thwart simpler attacks."
QEMU is by no means perfect with an ever growing set of CVEs from
flawed hardware device emulation, which could potentially be
exploited using ROP techniques.
Since GCC 11 there has been a compiler option that can mitigate
against this exploit technique:
-fzero-call-user-regs
To understand it refer to these two resources:
https://www.jerkeby.se/newsletter/posts/rop-reduction-zero-call-user-regs/https://gcc.gnu.org/pipermail/gcc-patches/2020-August/552262.html
I used two programs to scan qemu-system-x86_64 for ROP gadgets:
https://github.com/0vercl0k/rphttps://github.com/JonathanSalwan/ROPgadget
When asked to find 8 byte gadgets, the 'rp' tool reports:
A total of 440278 gadgets found.
You decided to keep only the unique ones, 156143 unique gadgets found.
While the ROPgadget tool reports:
Unique gadgets found: 353122
With the --ropchain argument, the latter attempts to use the found
gadgets to product a chain that can execute arbitrary syscalls. With
current QEMU it succeeds in this task, which is an undesirable
situation.
With QEMU modified to use -fzero-call-user-regs=used-gpr the 'rp' tool
reports
A total of 528991 gadgets found.
You decided to keep only the unique ones, 121128 unique gadgets found.
This is 22% fewer unique gadgets
While the ROPgadget tool reports:
Unique gadgets found: 328605
This is 7% fewer unique gadgets. Crucially though, despite this more
modest reduction, the ROPgadget tool is no longer able to identify a
chain of gadgets for executing arbitrary syscalls. It fails at the
very first step, unable to find gadgets for populating registers for
a future syscall. Having said that, more advanced tools do still
manage to put together a viable ROP chain.
Also this only takes into account QEMU code. QEMU links to many 3rd
party shared libraries and ideally all of them would be compiled with
this same hardening. That becomes a distro policy question though.
In terms of performance impact, TCG was used as an evaluation test
case. We're not interested in protecting TCG since it isn't designed
to provide a security barrier, but it is performance sensitive code,
so useful as a guide to how other areas of QEMU might be impacted.
With the -fzero-call-user-regs=used-gpr argument present, using the
real world test of booting a linux kernel and having init immediately
poweroff, there is a ~1% slow down in performance under TCG. The QEMU
binary size also grows by approximately 1%.
By comparison, using the more aggressive -fzero-call-user-regs=all,
results in a slowdown of over 25% in TCG, which is clearly not an
acceptable impact, and a binary size increase of 5%.
Considering that 'used-gpr' successfully stopped ROPgadget assembling
a chain, this more targeted protection is a justifiable hardening
/ performance tradeoff.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240103123414.2401208-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The npcm7xx_watchdog_timer-test can take more than 60 seconds in
SPEED=slow mode on a loaded host system.
Bumping to 2 minutes will give more headroom.
Message-ID: <20240112164717.1063954-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test_prescaler() part in the npcm7xx_watchdog_timer test is quite
repetitive, testing all possible combinations of the WTCLK and WTIS
bitfields. Since each test spins up a new instance of QEMU, this is
rather an expensive test, especially on loaded host systems.
For the normal quick test mode, it should be sufficient to test the
corner settings of these fields (i.e. 0 and 3), so we can speed up
this test in the default mode quite a bit.
Message-ID: <20240115070223.30178-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Our usage of gtest results in us losing the very basic functionality
of "knowing which test failed". The issue is that gtest only prints
test names ("paths" in gtest parlance) once the test has finished, but
we use asserts in the tests and crash gtest itself before it can print
anything. We also use a final abort when the result of g_test_run is
not 0.
Depending on how the test failed/broke we can see the function that
trigged the abort, which may be representative of the test, but it
could also just be some generic function.
We have been relying on the primitive method of looking at the name of
the previous successful test and then looking at the code to figure
out which test should have come next.
Add a wrapper to the test registration that does the job of printing
the test name before running.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240104142144.9680-7-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
In arm_pamax(), we need to cope with the virt board calling this
function on a CPU object which has been inited but not realize.
We used to do propagation of feature-flag implications (such as
"V7VE implies LPAE") at realize, so we have some code in arm_pamax()
which manually checks for both V7VE and LPAE feature flags.
In commit b8f7959f28 we moved the feature propagation for
almost all features from realize to post-init. That means that
now when the virt board calls arm_pamax(), the feature propagation
has been done. So we can drop the manual propagation handling
and check only for the feature we actually care about, which
is ARM_FEATURE_LPAE.
Retain the comment that the virt board is calling this function
with a not completely realized CPU object, because that is a
potential beartrap for later changes which is worth calling out.
(Note that b8f7959f28 actually fixed a bug in the arm_pamax()
handling: arm_pamax() was missing a check for ARM_FEATURE_V8, so it
incorrectly thought that the qemu-system-arm 'max' CPU did not have
LPAE and turned off 'highmem' support in the virt board. Following
b8f7959f28 qemu-system-arm 'max' is treated the same as
'cortex-a15' and other v7 LPAE CPUs, because the generic feature
propagation code does correctly propagate V8 -> V7VE -> LPAE.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240109143804.1118307-1-peter.maydell@linaro.org
We don't currently document the syntax of .hx files anywhere
except in a few comments at the top of individual .hx files.
We don't even have somewhere in the developer docs where we
could do this.
Add a new files docs/devel/docs.rst which can be a place to
document how our docs build process works. For the moment,
put in only a brief introductory paragraph and the documentation
of the .hx files. We could later add to this file by for
example describing how the QAPI-schema-to-docs process works,
or anything else that developers might need to know about
how to add documentation.
Make the .hx files refer to this doc file, and clean
up their header comments to be more accurate for the
usage in each file and less cut-n-pasted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-id: 20231212162313.1742462-1-peter.maydell@linaro.org
Put correct values (depending on CPU arch) into IOR and ISR on fault.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Put correct values (depending on CPU arch) into IOR and ISR on fault.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move functionality to set IOR and ISR on fault into own
function. This will be used by follow-up patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The value of unwind_breg may reference register %r0, but we need to avoid
accessing gr0 directly and use the value 0 instead.
At runtime I've seen unwind_breg being zero with the Linux kernel when
rfi is used to jump to smp_callin().
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Bruno Haible <bruno@clisp.org>
The various operating systems (e.g. Linux, NetBSD) have issues
mapping the power button when it's stored in page zero.
NetBSD even crashes, because it fails to map that page and then
accesses unmapped memory.
Since we now have a consistent memory mapping of PDC in 32-bit
and 64-bit address space (the lower 32-bits of the address are in
sync) the power button can be moved back to PDC space.
This patch fixes the power button on Linux, NetBSD and HP-UX.
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fix the address translation for PDC space on PA2.0 if PSW.W=0.
Basically, for any address in the 32-bit PDC range from 0xf0000000 to
0xf1000000 keep the lower 32-bits and just set the upper 32-bits to
0xfffffff0.
This mapping fixes the emulated power button in PDC space for 32- and
64-bit machines and is how the physical C3700 machine seems to map
PDC.
Figures H-10 and H-11 in the parisc2.0 spec [1] show that the 32-bit
region will be mapped somewhere into a higher and bigger 64-bit PDC
space. The start and end of this 64-bit space is defined by the
physical address bits. But the figures don't specifiy where exactly the
mapping will start inside that region. Tests on a real HP C3700
regarding the address of the power button indicate, that the lower
32-bits will stay the same though.
[1] https://parisc.wiki.kernel.org/images-parisc/7/73/Parisc2.0.pdf
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
NetBSD accesses some astro and elroy registers which aren't accessed
by Linux yet. Add emulation for those registers to allow NetBSD to
boot further.
Please note that this patch is not sufficient to completely boot up
NetBSD on the 64-bit C3700 machine yet.
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
Recognize the qemu --nodefaults option, which will disable the
following default devices on hppa:
- lsi53c895a SCSI controller,
- artist graphics card,
- LASI 82596 NIC,
- tulip PCI NIC,
- second serial PCI card,
- USB OHCI controller.
Adding this option is very useful to allow manual testing and
debugging of the other possible devices on the command line.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The physical hardware allows DIMMs of 4 MB size and above, allowing up
to 3840 MB of memory, but is restricted by setup code to 3 GB.
Increase the limit to allow up to the maximum amount of memory.
Btw. the memory area from 0xf000.0000 to 0xffff.ffff is reserved by
the architecture for firmware and I/O memory and can not be used for
standard memory.
An upcoming 64-bit SeaBIOS-hppa firmware will allow more than 3.75GB
on 64-bit HPPA64. In this case the ram_max for the pa20 case will change.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Nelson H. F. Beebe <beebe@math.utah.edu>
Fixes: b7746b1194 ("hw/hppa/machine: Restrict the total memory size to 3GB")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Bruno Haible <bruno@clisp.org>
* Fix non-deterministic failures of the 'netdev-socket' qtest
* Fix device presence checking in the virtio-ccw qtest
* Support codespell checking in checkpatch.pl
* Fix emulation of LAE s390x instruction
* Work around htags bug when environment is large
* Some other small clean-ups here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWgHlgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXAnBAAjQve/Jmfp9p8eQmswG7cl/a2TuJ59b9X
# SFRja2PprV/Wp4kxxEJX4er9F2+rlMusNL62LBp/QjZi9u4lCvCmuB7sMa0wEkjr
# BPPBrkxkAT+/8vhGpYg2GrxZv/UOLkycp3sjEp4v5yXWQw+OEBnkZZ+AuHddpnEr
# NKMKss71uQmccvuzD5FMDfbJQcSBD/yGPyFfDrv1RKreYRlbkEDVlcVoZpfoMwQY
# Pl167iDdmjVtsT+4wf8vHo5W/AYKDOjlV6AoujCnJVZnGx6BtDLiF/iNJ/VU1Ty5
# cRxySPT64HG+cGrbRqz9IjDvs++WW5EQn1jPY8NO2XFz3sney6Cs/pLKjqJY9S7P
# kfOXOBZG3zOI1kgd/CSR5b4szg4XvtTZaupczKiGOpYC9klf0oQNXGU5jXi3Csop
# Q332oUgiPeNdOx/4tXobFX6RwVCqLRYZbHx9RRYSxWlqJJPAB74/n+RZsmOtsxuJ
# RaiPKDmbVlslkUm78gIa5e6DMwDk2wmlkqa64W7VZxyqfQTRDPiPvfMGePkj6tmZ
# h9vUsELwwORlHpZyL08n0fzs3aeIYwzPwhfr+5iQZIawIp4Zqo8i8Lic/WfIlok9
# rmPIA0mjs1VtrUsroItw4NcY04xcVa7hkhz4EbkZROrfGamdkLuvbk2OKuOeoL0U
# lpgtQL6jA7E=
# =F/j2
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jan 2024 16:59:04 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-01-11' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/buildtest.yml: Work around htags bug when environment is large
tests/tcg/s390x: Test LOAD ADDRESS EXTENDED
target/s390x: Fix LAE setting a wrong access register
scripts/checkpatch: Support codespell checking
hw/s390x/ccw: Replace dirname() with g_path_get_dirname()
hw/s390x/ccw: Replace basename() with g_path_get_basename()
target/s390x/kvm/pv: Provide some more useful information if decryption fails
gitlab: fix s390x tag for avocado-system-centos
tests/qtest/virtio-ccw: Fix device presence checking
qtest: ensure netdev-socket tests have non-overlapping names
net: handle QIOTask completion to report useful error message
net: add explicit info about connecting/listening state
Revert "tests/qtest/netdev-socket: Raise connection timeout to 120 seconds"
Revert "osdep: add getloadavg"
Revert "netdev: set timeout depending on loadavg"
qtest: use correct boolean type for failover property
q800: move dp8393x_prom memory region to Q800MachineState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are warning messages printed from tests/qtest/numa-test.c,
to complain the CPU cluster and NUMA node boundary is broken. Since
the broken boundary is expected, we don't want to see the warning
messages.
# cd /home/gavin/sandbox/qemu.main/build
# MALLOC_PERTURB_=255 QTEST_QEMU_BINARY=./qemu-system-aarch64 \
G_TEST_DBUS_DAEMON=../tests/dbus-vmstate-daemon.sh \
QTEST_QEMU_IMG=./qemu-img \
QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon \
tests/qtest/numa-test --tap -k
:
qemu-system-aarch64: warning: CPU-0 and CPU-4 in socket-0-cluster-0 \
have been associated with node-0 and node-1 respectively. \
It can cause OSes like Linux to misbehave
:
Skip the invalidation of CPU cluster and NUMA node boundary when
qtest is enabled, to avoid the warning messages.
Fixes: a494fdb715 ("numa: Validate cluster and NUMA node boundary if required")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is now expected by rtd so I've expanded using their example as
22.04 is one of our supported platforms. I tried to work out if there
was an easy way to re-generate a requirements.txt from our
pythondeps.toml but in the end went for the easier solution.
Cc: <qemu-stable@nongnu.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231221174200.2693694-1-alex.bennee@linaro.org>
The mtest2make.py script passes the arg '-t 0' to 'meson test' which
disables all test timeouts. This is a major source of pain when running
in GitLab CI and a test gets stuck. It will stall until GitLab kills the
CI job. This leaves us with little easily consumable information about
the stalled test. The TAP format doesn't show the test name until it is
completed, and TAP output from multiple tests it interleaved. So we
have to analyse the log to figure out what tests had un-finished TAP
output present and thus infer which test case caused the hang. This is
very time consuming and error prone.
By allowing meson to kill stalled tests, we get a direct display of what
test program got stuck, which lets us more directly focus in on what
specific test case within the test program hung.
The other issue with disabling meson test timeouts by default is that it
makes it more likely that maintainers inadvertantly introduce slowdowns.
For example the recent-ish change that accidentally made migrate-test
take 15-20 minutes instead of around 1 minute.
The main risk of this change is that the individual test timeouts might
be too short to allow completion in high load scenarios. Thus, there is
likely to be some short term pain where we have to bump the timeouts for
certain tests to make them reliable enough. The preceeding few patches
raised the timeouts for all failures that were immediately apparent
in GitLab CI.
Even with the possible short term instability, this should still be a
net win for debuggability of failed CI pipelines over the long term.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230717182859.707658-13-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-17-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the tests in slow mode with --enable-debug on a very loaded
system, the fp-test-mulAdd test can take longer than 2 minutes. Bump the
timeout to three minutes to make sure it passes in such situations, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-16-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the tests in slow mode on a very loaded system and with
--enable-debug, the test-crypto-block can take longer than 4 minutes.
Bump the timeout to 5 minutes to make sure that it also passes in
such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-15-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the tests in slow mode on a very loaded system and with
--enable-debug, the test-aio-multithread can take longer than 1 minute.
Bump the timeout to two minutes to make sure that it also passes in
such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-14-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the test in slow mode on a very loaded system with the
arm/aarch64 target and with --enable-debug, it can take longer than
10 minutes to finish the introspection test. Bump the timeout to twelve
minutes to make sure that it also finishes in such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-13-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
On a loaded system with --enable-debug, this test can take longer than
5 minutes. Raising the timeout to 6 minutes gives greater headroom for
such situations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Increase the timeout to 6 minutes for very loaded systems]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-11-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The prom-env-test can take more than 5 minutes in a --enable-debug
build on a loaded system. Bumping to 6 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Bump timeout to 6 minutes instead of 3]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-8-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The pxe-test uses the boot_sector_test() function, and that already
uses a timeout of 600 seconds. So adjust the timeout on the meson
side accordingly.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Bump timeout to 600s and adjust commit description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-7-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The migration test should take between 1 min 30 and 2 mins on reasonably
modern hardware. The test is not especially compute bound, rather its
running time is dominated by the guest RAM size relative to the
bandwidth cap, which forces each iteration to take at least 30 seconds.
None the less under high load conditions with multiple QEMU processes
spawned and competing with other parallel tests, the worst case running
time might be somewhat extended. Bumping the timeout to 8 minutes gives
us good headroom, while still catching stuck tests relatively quickly.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-3-berrange@redhat.com>
[thuth: Bump timeout to 8 minutes to make it work on very loaded systems, too]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The function qemu_chr_fe_init already treats be->fe_open as a bool and
if it acts like a bool it should be one. While we are at it make the
variable name more descriptive and add kdoc decorations.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211145959.93759-1-alex.bennee@linaro.org>
We've already got a test for a big endian microblaze machine, but so
far we lack one for a little endian machine. Now that the QEMU advent
calendar featured such an image, we can test the little endian mode,
too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215161851.71508-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Sometimes the CI "pages" job fails with a message like this from
htags:
$ htags -anT --tree-view=filetree -m qemu_init -t "Welcome to the QEMU sourcecode"
htags: Negative exec line limit = -371
This is due to a bug in hflags where if the environment is too large it
falls over:
https://lists.gnu.org/archive/html/bug-global/2024-01/msg00000.html
This happens to us because GitLab CI puts the commit message of the
commit under test into the CI_COMMIT_MESSAGE and/or CI_COMMIT_TAG_MESSAGE
environment variables, so the job will fail if the commit happens to
have a verbose commit message.
Work around the htags bug by unsetting these variables while running
htags.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2080
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240111125543.1573473-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
edk2: update to git snapshot (maybe for-8.2)
This updates edk2 to git master as of today. This picks up a patch
(merged only yesterday, that's why this last-minute PR) which allows to
work around a bug in shim, and enables that workaround in the qemu
firmware builds.
This solves a real-world problem on arm hardware, walk over to
https://gitlab.com/qemu-project/qemu/-/issues/1990 to see the details.
Merging this firmware update that close to the 8.2 release clearly is
not without risks. If I get a 'no', I'm not going to complain.
That said I'm not aware of any bugs, and landing this in 8.2.0 would
make a bunch of folks hanging around in issue 1990 very happy.
Alternative plan would be to merge this after the release, give it some
time for testing, and assuming everything goes well schedule a backport
for 8.2.1
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmV5i70ACgkQTLbY7tPo
# cTg5mA//VDjGNmBYWhIhf5c7Z8+h1FspnqkxqResX3KgE2indCWkTlyZnCFGb7CO
# NgDiCR7xKMw9S1Cun14vTs/OK8BVFvmXGhTIgjecK+k6w6D8PtR4QvfXYUKxNajA
# Sd6reWAlojlgKOkpcrejrSSvtBTZqrJc8CrkowMR3FZXzD0GstUCMZ0jBvVhzlO6
# o9RMk0kbf+VNupsA+v9ZWPstMHXjLKs8v1eUqrc6LYOanY6mqQM5Wz9yWteUfrNp
# /0zShBrkmB+BgPoRQypphFdXRacP82fVXDMeTSbbXaReI0PR9MLKZnyk0UUkES6k
# BTtEVEM0cCAYLGaGFjHZVEpbrtFmVBisE0fLgdozsCU8SMCuxjNzXyj0HGRsJ7m4
# UQ+qGJLOR3Zx/Bnz3LLKOmWBlq6MQD5lYgxk3dwSPKzXTqun1ndlVKenJ3Z9fgXQ
# gibVbS/2fNylR9aoPSYkXnlE8l8vSo24sXIn8R2wX8rJ0xBc6bFDs1MKizzv2b9l
# YUeybDwgDvbbDLGSN4DgIeNSZxQBgNO/nmuFnx8jNxTqcNlCJFHO2jR7gPijj5ct
# ZPQQwLCCEIxD3OY3Dg94zXDm1EfWZQpNBFDD/83joJt/15Vu9GLsPqEs4QUdiQsp
# MO4Bd7HFavLSGsyX1rMe0yonWirbRX2uKYmyc+KwGjjS9LRGesU=
# =bcZj
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Dec 2023 10:47:25 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'firmware/edk2-20231213-pull-request' of https://gitlab.com/kraxel/qemu:
tests/acpi: disallow tests/data/acpi/virt/SSDT.memhp changes
tests/acpi: update expected data files
edk2: update binaries to git snapshot
edk2: update build config, set PcdUninstallMemAttrProtocol = TRUE.
edk2: update to git snapshot
tests/acpi: allow tests/data/acpi/virt/SSDT.memhp changes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pull-loongarch-20240111
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZZ/QKgAKCRBAov/yOSY+
# 34eqBADA48++Z9gETFNheLUHdYEaja2emn+gSaoHLFquyq/l53w8RfrUII+BzV1o
# T7D8xjlVQldAYZzqQn2pQe2S7r4ggfeNmxGxwJbCTW9sooGMwBnU8+Ix3ruSet7K
# gI+UHLU4oHk6jdrT384tux2EG+qUmlLN1c7j4G/z1OzKEwFv7Q==
# =+Pi0
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jan 2024 11:25:30 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240111' of https://gitlab.com/gaosong/qemu:
hw/intc/loongarch_extioi: Add vmstate post_load support
hw/intc/loongarch_extioi: Add dynamic cpu number support
hw/loongarch/virt: Set iocsr address space per-board rather than percpu
hw/intc/loongarch_ipi: Use MemTxAttrs interface for ipi ops
target/loongarch: Add loongarch kvm into meson build
target/loongarch: Implement set vcpu intr for kvm
target/loongarch: Restrict TCG-specific code
target/loongarch: Implement kvm_arch_handle_exit
target/loongarch: Implement kvm_arch_init_vcpu
target/loongarch: Implement kvm_arch_init function
target/loongarch: Implement kvm get/set registers
target/loongarch: Supplement vcpu env initial when vcpu reset
target/loongarch: Define some kvm_arch interfaces
linux-headers: Synchronize linux headers from linux v6.7.0-rc8
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add two spelling check options (--codespell and --codespellfile) to
enhance spelling check through dictionary, which copied the Linux
kernel's implementation in checkpatch.pl.
This check uses the dictionary at "/usr/share/codespell/dictionary.txt"
by default, if there is no dictionary specified under this path, it
will look for the dictionary of python3's codespell (This requires user
to add python3's path in environment variable $PATH, and to install
codespell by "pip install codespell").
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Tested-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240105083848.267192-1-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As commit 3e015d815b ("use g_path_get_basename instead of basename")
said, g_path_get_dirname() should be preferred over dirname() since
the former is a portable utility function that has the advantage of not
modifying the string argument.
Replace dirname() with g_path_get_dirname().
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20231221171921.57784-3-zhao1.liu@linux.intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's a common scenario to copy guest images from one host to another
to run the guest on the other machine. This (of course) does not work
with "secure execution" guests since they are encrypted with one certain
host key. However, if you still (accidentally) do it, you only get a
very user-unfriendly error message that looks like this:
qemu-system-s390x: KVM PV command 2 (KVM_PV_SET_SEC_PARMS) failed:
header rc 108 rrc 5 IOCTL rc: -22
Let's provide at least a somewhat nicer hint to the users so that they
are able to figure out what might have gone wrong.
Buglink: https://issues.redhat.com/browse/RHEL-18212
Message-ID: <20240110142916.850605-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There are elements sw_ipmap and sw_coremap, which is usd to speed
up irq injection flow. They are saved and restored in vmstate during
migration, indeed they can calculated from hw registers. Here
post_load is added for get sw_ipmap and sw_coremap from extioi hw
state.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-5-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
On LoongArch physical machine, one extioi interrupt controller only
supports 4 cpus. With processor more than 4 cpus, there are multiple
extioi interrupt controllers; if interrupts need to be routed to
other cpus, they are forwarded from extioi node0 to other extioi nodes.
On virt machine model, there is simple extioi interrupt device model.
All cpus can access register of extioi interrupt controller, however
interrupt can only be route to 4 vcpu for compatible with old kernel.
This patch adds dynamic cpu number support about extioi interrupt.
With old kernel legacy extioi model is used, however kernel can detect
and choose new route method in future, so that interrupt can be routed to
all vcpus.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
LoongArch system has iocsr address space, most iocsr registers are
per-board, however some iocsr register spaces banked for percpu such
as ipi mailbox and extioi interrupt status. For banked iocsr space,
each cpu has the same iocsr space, but separate data.
This patch changes iocsr address space per-board rather percpu,
for iocsr registers specified for cpu, MemTxAttrs.requester_id
can be parsed for the cpu. With this patches, the total address space
on board will be simple, only iocsr address space and system memory,
rather than the number of cpu and system memory.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
There are two interface pairs for MemoryRegionOps, read/write and
read_with_attrs/write_with_attrs. The later is better for ipi device
emulation since initial cpu can be parsed from attrs.requester_id.
And requester_id can be overrided for IOCSR_IPI_SEND and mail_send
function when it is to forward message to another vcpu.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Implement kvm_arch_init_vcpu interface for loongarch,
in this function, we register VM change state handler.
And when VM state changes to running, the counter value
should be put into kvm to keep consistent with kvm,
and when state change to stop, counter value should be
refreshed from kvm.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240105075804.1228596-7-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
tcg/i386: Use more 8-bit immediate forms for add, sub, or, xor
tcg/ppc: Use new registers for LQ destination
util: fix build with musl libc on ppc64le
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmWfESodHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8OLQf/TnNOeBPGFVFRLycp
# rRbLxFar/oRP0SfH7I1S09vKFH+mlb5JK5Er4DL9CmUxV596r9ZGiwC6RlowK8nD
# INfC9Nnf3MgeyViDG41bA5oxiWom+XxbFtN4iVZo84CVDFEZFt0xjaq7d9Zhfj9J
# xWWAlCr013MnhamjmEB2NKxQzLnIMhJs1JuhkAbThKsaPoDwHLSmIMSMJlRwrf27
# Ey9blEt8GAOkd1iMA0xpw2vthNUfpCgZibg//CzqZevIq8pdxcieQ9ZjuxLjDM32
# N3u3eaX9SyuLwj4682MYuHYIxpuZ+HkIkjmuIQBsBuG8d3EoDs+rr/9Jzi47f/nR
# 0btVug==
# =rXXF
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 Jan 2024 21:50:34 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20240111' of https://gitlab.com/rth7680/qemu:
util: fix build with musl libc on ppc64le
tcg/ppc: Use new registers for LQ destination
tcg/i386: use 8-bit OR or XOR for unsigned 8-bit immediates
tcg/i386: convert add/sub of 128 to sub/add of -128
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An apparent copy-paste error tests for the presence of the
virtio-rng-ccw device in order to perform tests on the virtio-scsi-ccw
device.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Message-ID: <20240106130121.1244993-1-sam@rfc1149.net>
Fixes: 65331bf5d1 ("tests/qtest: Check for virtio-ccw devices before using them")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The network stream backend uses the async QIO socket APIs for listening
and connecting sockets. It does not check the task object completion
status, however, instead just looking at whether the socket FD is -1
or not.
By checking the task completion, we can set a useful error message for
users instead of the non-actionable "connection error" string.
eg so users will see:
(qemu) info network
net: index=0,type=stream,error: Failed to connect to '/foo.unix': No such file or directory
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240104162942.211458-6-berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running 'info network', if the stream backend is still in
the process of connecting, or waiting for an incoming connection,
no information is displayed.
There is also no way to distinguish whether the server is still
in the process of setting up the listener socket, or whether it
is ready to accept incoming client connections.
This leads to a race condition in the netdev-socket qtest which
launches a server process followed by a client process. Under
high load conditions it is possible for the client to attempt
to connect before the server is accepting clients. For the
scenarios which do not set the 'reconnect' option, this opens
up a race which can lead to the test scenario failing to reach
the expected state.
Now that 'info network' can distinguish between initialization
phase and the listening phase, the netdev-socket qtest will
correctly synchronize, such that the client QEMU is not spawned
until the server is ready.
This should solve the non-deterministic failures seen with the
netdev-socket qtest.
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240104162942.211458-5-berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 0daaf2761f.
The test was not timing out because of slow execution. It was
timing out due to a race condition leading to the client QEMU
attempting (and fatally failing) to connect before the server
QEMU was listening.
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240104162942.211458-4-berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit cadfc72939.
The test was not timing out because of slow execution. It was
timing out due to a race condition leading to the client QEMU
attempting (and fatally failing) to connect before the server
QEMU was listening.
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240104162942.211458-2-berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QMP device_add does not historically validate the parameter types.
At some point it will likely change to enforce correct types, to
match behaviour of -device. The failover property is expected to
be a boolean in JSON.
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240103123005.2400437-1-berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
LQ has a constraint that RTp != RA, else SIGILL.
Therefore, force the destination of INDEX_op_qemu_*_ld128 to be a
new register pair, so that it cannot overlap the input address.
This requires new support in process_op_defs and tcg_reg_alloc_op.
Cc: qemu-stable@nongnu.org
Fixes: 526cd4ec01 ("tcg/ppc: Support 128-bit load/store")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240102013456.131846-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the case where OR or XOR has an 8-bit immediate between 128 and 255,
we can operate on a low-byte register and shorten the output by two or
three bytes (two if a prefix byte is needed for REX.B).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231228120524.70239-1-pbonzini@redhat.com>
[rth: Incorporate into switch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extend the existing conditional that generates INC/DEC, to also swap an
ADD for a SUB and vice versa when the immediate is 128. This facilitates
using OPC_ARITH_EvIb instead of OPC_ARITH_EvIz.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231228120514.70205-1-pbonzini@redhat.com>
[rth: Use a switch on C]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
RISC-V PR for 9.0
* Make vector whole-register move (vmv) depend on vtype register
* Fix th.dcache.cval1 priviledge check
* Don't allow write mstatus_vs without RVV
* Use hwaddr instead of target_ulong for RV32
* Fix machine IDs QOM getters\
* Fix KVM reg id sizes
* ACPI: Enable AIA, PLIC and update RHCT
* Fix the interrupts-extended property format of PLIC
* Add support for Zacas extension
* Add amocas.[w,d,q] instructions
* Document acpi parameter of virt machine
* RVA22 profiles support
* Remove group setting of KVM AIA if the machine only has 1 socket
* Add RVV CSRs to KVM
* sifive_u: Update S-mode U-Boot image build instructions
* Upgrade OpenSBI from v1.3.1 to v1.4
* pmp: Ignore writes when RW=01 and MML=0
* Assert that the CSR numbers will be correct
* Don't adjust vscause for exceptions
* Ensure mideleg is set correctly on reset
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmWeW8kACgkQr3yVEwxT
# gBMB3BAAtpb7dC/NqDOjo/LjGf81wYUnF0KcfJUIbuHEM9S03mKJEvngV/sUhg+A
# fzsoJazijQZk2+Y02WLT/o+ppRDegb4P6n54Nn13xr024Dn2jf45+EKDLI+vtU5y
# lhwp/LH3SEo2MM/Qr0njl8+jJ7W9adhZeK6x+NFaLaQJ291xupbcwEnScdv2bPAo
# gvbM6yrfUoZ25MsQKIDGssozdGRwOD/keAT0q8C0gKDamqXBDrI80BOVhRms+uLm
# R33DXsAegPKluJTa9gfaWFI0eK34WHXRvSIjE36nZlGNNgqLAVdM2/QozMVz4cKA
# Ymz1nzqB9HeSn1pM4KCK/Y3LH89qLGWtyHYgldiDXA/wSyKajwkbXSWFOT9gPDqV
# i+5BRDvU0zIeMIt+ROqNKgx1Hry6U2aycMNsdHTmygJbGEpiTaXuES5tt+LKsyHe
# w/7a6wPd/kh9LQhXYQ4qbn7L534tWvn8zWyvKLZLxmYPcOn6SdjFbKWmk5ARky2W
# sx9ojn9ANlYaLfzQ3TMRcIhWD6n8Si3KFNiQ3353E8xkRkyfu0WHyXAy8/kIc5UT
# nScO2YD68XkdkcLF6uLUKuGiVZXFWXRY1Ttz9tvEmBckVsg6TIkoMONHeUWNP7ly
# A0bJwN5qEOk6XIYKHWwX5UzvkcfUpOb5VmuLuv3gRoNX0A7/+fc=
# =5K9J
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 Jan 2024 08:56:41 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240110' of https://github.com/alistair23/qemu: (65 commits)
target/riscv: Ensure mideleg is set correctly on reset
target/riscv: Don't adjust vscause for exceptions
target/riscv: Assert that the CSR numbers will be correct
target/riscv: pmp: Ignore writes when RW=01 and MML=0
roms/opensbi: Upgrade from v1.3.1 to v1.4
docs/system/riscv: sifive_u: Update S-mode U-Boot image build instructions
target/riscv/kvm: add RVV and Vector CSR regs
target/riscv/kvm: do PR_RISCV_V_SET_CONTROL during realize()
linux-headers: riscv: add ptrace.h
linux-headers: Update to Linux v6.7-rc5
target/riscv/kvm.c: remove group setting of KVM AIA if the machine only has 1 socket
target/riscv: add rva22s64 cpu
target/riscv: add RVA22S64 profile
target/riscv: add 'parent' in profile description
target/riscv: add satp_mode profile support
target/riscv/cpu.c: add riscv_cpu_is_32bit()
target/riscv/cpu.c: finalize satp_mode earlier
target/riscv: add priv ver restriction to profiles
target/riscv: implement svade
target/riscv: add 'rva22u64' CPU
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CSRs will always be between either CSR_MHPMCOUNTER3 and
CSR_MHPMCOUNTER31 or CSR_MHPMCOUNTER3H and CSR_MHPMCOUNTER31H.
So although ctr_index can't be negative, Coverity doesn't know this and
it isn't obvious to human readers either. Let's add an assert to ensure
that Coverity knows the values will be within range.
To simplify the code let's also change the RV32 adjustment.
Fixes: Coverity CID 1523910
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240108001328.280222-2-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch changes behavior on writing RW=01 to pmpcfg with MML=0.
RWX filed is form of collective WARL with the combination of
pmpcfg.RW=01 remains reserved for future standard use.
According to definition of WARL writing the CSR has no other side
effect. But current implementation change architectural state and
change system behavior. After writing we will get unreadable-unwriteble
region regardless on the previous state.
On the other side WARL said that we should read legal value and nothing
says about what we should write. Current behavior change system state
regardless of whether we read this register or not.
Fixes: ac66f2f0 ("target/riscv: pmp: Ignore writes when RW=01")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231220153205.11072-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the documentation outlines the process for building the
S-mode U-Boot image using `make menuconfig` and manual actions within
the menuconfig UI. However, this approach is fragile due to Kconfig
options potentially changing across different releases. For example,
CONFIG_OF_PRIOR_STAGE has been replaced by CONFIG_BOARD since v2022.01
release, and CONFIG_TEXT_BASE has been moved to the 'General setup'
menu from the 'Boot options' menu in v2024.01 release.
This update aims to make the S-mode U-Boot image build instructions
future-proof. It leverages the 'config' script provided in the U-Boot
source tree to edit the .config file, followed by a `make olddefconfig`.
Validated with U-Boot v2024.01 release.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240104071523.273702-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Linux RISC-V vector documentation (Document/arch/riscv/vector.rst)
mandates a prctl() in order to allow an userspace thread to use the
Vector extension from the host.
This is something to be done in realize() time, after init(), when we
already decided whether we're using RVV or not. We don't have a
realize() callback for KVM yet, so add kvm_cpu_realize() and enable RVV
for the thread via PR_RISCV_V_SET_CONTROL.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218204321.75757-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The emulated AIA within the Linux kernel restores the HART index
of the IMSICs according to the configured AIA settings. During
this process, the group setting is used only when the machine
partitions harts into groups. It's unnecessary to set the group
configuration if the machine has only one socket, as its address
space might not contain the group shift.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231218090543.22353-2-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RVA22S64 profile consists of the following:
- all mandatory extensions of RVA22U64;
- priv spec v1.12.0;
- satp mode sv39;
- Ssccptr, a cache related named feature that we're assuming always
enable since we don't implement a cache;
- Other named features already implemented: Sstvecd, Sstvala,
Sscounterenw;
- the new Svade named feature that was recently added.
Most of the work is already done, so this patch is enough to implement
the profile.
After this patch, the 'rva22s64' user flag alone can be used with the
rva64i CPU to boot Linux:
-cpu rv64i,rva22s64=true
This is the /proc/cpuinfo with this profile enabled:
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicbop_zicboz_zicntr_zicsr_zifencei_zihintpause_zihpm_zfhmin_zca_zcd_zba_zbb_zbs_zkt_svinval_svpbmt
mmu : sv39
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-26-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Certain S-mode profiles, like RVA22S64 and RVA23S64, mandate all the
mandatory extensions of their respective U-mode profiles. RVA22S64
includes all mandatory extensions of RVA22U64, and the same happens with
RVA23 profiles.
Add a 'parent' field to allow profiles to enable other profiles. This
will allow us to describe S-mode profiles by specifying their parent
U-mode profile, then adding just the S-mode specific extensions.
We're naming the field 'parent' to consider the possibility of other
uses (e.g. a s-mode profile including a previous s-mode profile) in the
future.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-25-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'satp_mode' is a requirement for supervisor profiles like RVA22S64.
User-mode/application profiles like RVA22U64 doesn't care.
Add 'satp_mode' to the profile description. If a profile requires it,
set it during cpu_set_profile(). We'll also check it during finalize()
to validate if the running config implements the profile.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-24-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Next patch will need to retrieve if a given RISCVCPU is 32 or 64 bit.
The existing helper riscv_is_32bit() (hw/riscv/boot.c) will always check
the first CPU of a given hart array, not any given CPU.
Create a helper to retrieve the info for any given CPU, not the first
CPU of the hart array. The helper is using the same 32 bit check that
riscv_cpu_satp_mode_finalize() was doing.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-23-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'svade' is a RVA22S64 profile requirement, a profile we're going to add
shortly. It is a named feature (i.e. not a formal extension, not defined
in riscv,isa DT at this moment) defined in [1] as:
"Page-fault exceptions are raised when a page is accessed when A bit is
clear, or written when D bit is clear.".
As far as the spec goes, 'svade' is one of the two distinct modes of
handling PTE_A and PTE_D. The other way, i.e. update PTE_A/PTE_D when
they're cleared, is defined by the 'svadu' extension. Checking
cpu_helper.c, get_physical_address(), we can verify that QEMU is
compliant with that: we will update PTE_A/PTE_D if 'svadu' is enabled,
or throw a page-fault exception if 'svadu' isn't enabled.
So, as far as we're concerned, 'svade' translates to 'svadu must be
disabled'.
We'll implement it like 'zic64b': an internal flag that profiles can
enable. The flag will not be exposed to users.
[1] https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Expose all profile flags for all CPUs when executing
query-cpu-model-expansion. This will allow callers to quickly determine
if a certain profile is implemented by a given CPU. This includes vendor
CPUs - the fact that they don't have profile user flags doesn't mean
that they don't implement the profile.
After this change it's possible to quickly determine if our stock CPUs
implement the existing rva22u64 profile. Here's a few examples:
$ ./build/qemu-system-riscv64 -S -M virt -display none
-qmp tcp:localhost:1234,server,wait=off
$ ./scripts/qmp/qmp-shell localhost:1234
Welcome to the QMP low-level shell!
Connected to QEMU 8.1.50
- As expected, the 'max' CPU implements the rva22u64 profile.
(QEMU) query-cpu-model-expansion type=full model={"name":"max"}
{"return": {"model":
{"name": "rv64", "props": {... "rva22u64": true, ...}}}}
- rv64 is missing "zba", "zbb", "zbs", "zkt" and "zfhmin":
query-cpu-model-expansion type=full model={"name":"rv64"}
{"return": {"model":
{"name": "rv64", "props": {... "rva22u64": false, ...}}}}
query-cpu-model-expansion type=full model={"name":"rv64",
"props":{"zba":true,"zbb":true,"zbs":true,"zkt":true,"zfhmin":true}}
{"return": {"model":
{"name": "rv64", "props": {... "rva22u64": true, ...}}}}
We have no vendor CPUs that supports rva22u64 (veyron-v1 is the closest
- it is missing just 'zkt').
In short, aside from the 'max' CPU, we have no CPUs that supports
rva22u64 by default.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Enabling a profile and then disabling some of its mandatory extensions
is a valid use. It can be useful for debugging and testing. But the
common expected use of enabling a profile is to enable all its mandatory
extensions.
Add an user warning when mandatory extensions from an enabled profile
are disabled in the command line. We're also going to disable the
profile flag in this case since the profile must include all the
mandatory extensions. This flag can be exposed by QMP to indicate the
actual profile state after the CPU is realized.
After this patch, this will throw warnings:
-cpu rv64,rva22u64=true,zihintpause=false,zicbom=false,zicboz=false
qemu-system-riscv64: warning: Profile rva22u64 mandates disabled extension zihintpause
qemu-system-riscv64: warning: Profile rva22u64 mandates disabled extension zicbom
qemu-system-riscv64: warning: Profile rva22u64 mandates disabled extension zicboz
Note that the following will NOT throw warnings because the profile is
being enabled last, hence all its mandatory extensions will be enabled:
-cpu rv64,zihintpause=false,zicbom=false,zicboz=false,rva22u64=true
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RVG behaves like a profile: a single flag enables a set of bits. Right
now we're considering user choice when handling RVG and zicsr/zifencei
and ignoring user choice on MISA bits.
We'll add user warnings for profiles when the user disables its
mandatory extensions in the next patch. We'll do the same thing with RVG
now to keep consistency between RVG and profile handling.
First and foremost, create a new RVG only helper to avoid clogging
riscv_cpu_validate_set_extensions(). We do not want to annoy users with
RVG warnings like we did in the past (see 9b9741c38f), thus we'll only
warn if RVG was user set and the user disabled a RVG extension in the
command line.
For every RVG MISA bit (IMAFD), zicsr and zifencei, the logic then
becomes:
- if enabled, do nothing;
- if disabled and not user set, enable it;
- if disabled and user set, throw a warning that it's a RVG mandatory
extension.
This same logic will be used for profiles in the next patch.
Note that this is a behavior change, where we would error out if the
user disabled either zicsr or zifencei. As long as users are explicitly
disabling things in the command line we'll let them have a go at it, at
least in this step. We'll error out later in the validation if needed.
Other notable changes from the previous RVG code:
- use riscv_cpu_write_misa_bit() instead of manually updating both
env->misa_ext and env->misa_ext_mask;
- set zicsr and zifencei directly. We're already checking if they
were user set and priv version will never fail for these
extensions, making cpu_cfg_ext_auto_update() redundant.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The profile support is handling multi-letter extensions only. Let's add
support for MISA bits as well.
We'll go through every known MISA bit. If the profile doesn't declare
the bit as mandatory, ignore it. Otherwise, set the bit in env->misa_ext
and env->misa_ext_mask.
Now that we're setting profile MISA bits, one can use the rv64i CPU to boot
Linux using the following options:
-cpu rv64i,rva22u64=true,rv39=true,s=true,zifencei=true
In the near future, when rva22s64 (where, 's', 'zifencei' and sv39 are
mandatory), is implemented, rv64i will be able to boot Linux loading
rva22s64 and no additional flags.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We already track user choice for multi-letter extensions because we
needed to honor user choice when enabling/disabling extensions during
realize(). We refrained from adding the same mechanism for MISA
extensions since we didn't need it.
Profile support requires tne need to check for user choice for MISA
extensions, so let's add the corresponding hash now. It works like the
existing multi-letter hash (multi_ext_user_opts) but tracking MISA bits
options in the cpu_set_misa_ext_cfg() callback.
Note that we can't re-use the same hash from multi-letter extensions
because that hash uses cpu->cfg offsets as keys, while for MISA
extensions we're using MISA bits as keys.
After adding the user hash in cpu_set_misa_ext_cfg(), setting default
values with object_property_set_bool() in add_misa_properties() will end
up marking the user choice hash with them. Set the default value
manually to avoid it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231218125334.37184-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The TCG emulation implements all the extensions described in the
RVA22U64 profile, both mandatory and optional. The mandatory extensions
will be enabled via the profile flag. We'll leave the optional
extensions to be enabled by hand.
Given that this is the first profile we're implementing in TCG we'll
need some ground work first:
- all profiles declared in riscv_profiles[] will be exposed to users.
TCG is the main accelerator we're considering when adding profile
support in QEMU, so for now it's safe to assume that all profiles in
riscv_profiles[] will be relevant to TCG;
- we'll not support user profile settings for vendor CPUs. The flags
will still be exposed but users won't be able to change them;
- profile support, albeit available for all non-vendor CPUs, will be
based on top of the new 'rv64i' CPU. Setting a profile to 'true' means
enable all mandatory extensions of this profile, setting it to 'false'
will disable all mandatory profile extensions of the CPU, which will
obliterate preset defaults. This is not a problem for a bare CPU like
rv64i but it can allow for silly scenarios when using other CPUs. E.g.
an user can do "-cpu rv64,rva22u64=false" and have a bunch of default
rv64 extensions disabled. The recommended way of using profiles is the
rv64i CPU, but users are free to experiment.
For now we'll handle multi-letter extensions only. MISA extensions need
additional steps that we'll take care later. At this point we can boot a
Linux buildroot using rva22u64 using the following options:
-cpu rv64i,rva22u64=true,sv39=true,g=true,c=true,s=true
Note that being an usermode/application profile we still need to
explicitly set 's=true' to enable Supervisor mode to boot Linux.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM does not have the means to support enabling the rva22u64 profile.
The main reasons are:
- we're missing support for some mandatory rva22u64 extensions in the
KVM module;
- we can't make promises about enabling a profile since it all depends
on host support in the end.
We'll revisit this decision in the future if needed. For now mark the
'rva22u64' profile as unavailable when running a KVM CPU:
$ qemu-system-riscv64 -machine virt,accel=kvm -cpu rv64,rva22u64=true
qemu-system-riscv64: can't apply global rv64-riscv-cpu.rva22u64=true:
'rva22u64' is not available with KVM
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231218125334.37184-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The rva22U64 profile, described in:
https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc#rva22-profiles
Contains a set of CPU extensions aimed for 64-bit userspace
applications. Enabling this set to be enabled via a single user flag
makes it convenient to enable a predictable set of features for the CPU,
giving users more predicability when running/testing their workloads.
QEMU implements all possible extensions of this profile. All the so
called 'synthetic extensions' described in the profile that are cache
related are ignored/assumed enabled (Za64rs, Zic64b, Ziccif, Ziccrse,
Ziccamoa, Zicclsm) since we do not implement a cache model.
An abstraction called RISCVCPUProfile is created to store the profile.
'ext_offsets' contains mandatory extensions that QEMU supports. Same
thing with the 'misa_ext' mask. Optional extensions must be enabled
manually in the command line if desired.
The design here is to use the common target/riscv/cpu.c file to store
the profile declaration and export it to the accelerator files. Each
accelerator is then responsible to expose it (or not) to users and how
to enable the extensions.
Next patches will implement the profile for TCG and KVM.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231218125334.37184-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Named features (zic64b the sole example at this moment) aren't expose to
users, thus we need another way to expose them.
Go through each named feature, get its boolean value, do the needed
conversions (bool to qbool, qbool to QObject) and add it to output dict.
Another adjustment is needed: named features are evaluated during
finalize(), so riscv_cpu_finalize_features() needs to be mandatory
regardless of whether we have an input dict or not. Otherwise zic64b
will always return 'false', which is incorrect: the default values of
cache blocksizes ([cbom/cbop/cboz]_blocksize) are set to 64, satisfying
the conditions for zic64b.
Here's an API usage example after this patch:
$ ./build/qemu-system-riscv64 -S -M virt -display none
-qmp tcp:localhost:1234,server,wait=off
$ ./scripts/qmp/qmp-shell localhost:1234
Welcome to the QMP low-level shell!
Connected to QEMU 8.1.50
(QEMU) query-cpu-model-expansion type=full model={"name":"rv64"}
{"return": {"model":
{"name": "rv64", "props": {... "zic64b": true, ...}}}}
zic64b is set to 'true', as expected, since all cache sizes are 64
bytes by default.
If we change one of the cache blocksizes, zic64b is returned as 'false':
(QEMU) query-cpu-model-expansion type=full model={"name":"rv64","props":{"cbom_blocksize":128}}
{"return": {"model":
{"name": "rv64", "props": {... "zic64b": false, ...}}}}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zic64b is defined in the RVA22U64 profile [1] as a named feature for
"Cache blocks must be 64 bytes in size, naturally aligned in the address
space". It's a fantasy name for 64 bytes cache blocks. The RVA22U64
profile mandates this feature, meaning that applications using this
profile expects 64 bytes cache blocks.
To make the upcoming RVA22U64 implementation complete, we'll zic64b as
a 'named feature', not a regular extension. This means that:
- it won't be exposed to users;
- it won't be written in riscv,isa.
This will be extended to other named extensions in the future, so we're
creating some common boilerplate for them as well.
zic64b is default to 'true' since we're already using 64 bytes blocks.
If any cache block size (cbo{m,p,z}_blocksize) is changed to something
different than 64, zic64b is set to 'false'.
Our profile implementation will then be able to check the current state
of zic64b and take the appropriate action (e.g. throw a warning).
[1] https://github.com/riscv/riscv-profiles/releases/download/v1.0/profiles.pdf
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU already implements zicbom (Cache Block Management Operations) and
zicboz (Cache Block Zero Operations). Commit 59cb29d6a5 ("target/riscv:
add Zicbop cbo.prefetch{i, r, m} placeholder") added placeholders for
what would be the instructions for zicbop (Cache Block Prefetch
Operations), which are now no-ops.
The RVA22U64 profile mandates zicbop, which means that applications that
run with this profile might expect zicbop to be present in the riscv,isa
DT and might behave badly if it's absent.
Adding zicbop as an extension will make our future RVA22U64
implementation more in line with what userspace expects and, if/when
cache block prefetch operations became relevant to QEMU, we already have
the extension flag to turn then on/off as needed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We don't have any form of a 'bare bones' CPU. rv64, our default CPUs,
comes with a lot of defaults. This is fine for most regular uses but
it's not suitable when more control of what is actually loaded in the
CPU is required.
A bare-bones CPU would be annoying to deal with if not by profile
support, a way to load a multitude of extensions with a single flag.
Profile support is going to be implemented shortly, so let's add a CPU
for it.
The new 'rv64i' CPU will have only RVI loaded. It is inspired in the
profile specification that dictates, for RVA22U64 [1]:
"RVA22U64 Mandatory Base
RV64I is the mandatory base ISA for RVA22U64"
And so it seems that RV64I is the mandatory base ISA for all profiles
listed in [1], making it an ideal CPU to use with profile support.
rv64i is a CPU of type TYPE_RISCV_BARE_CPU. It has a mix of features
from pre-existent CPUs:
- it allows extensions to be enabled, like generic CPUs;
- it will not inherit extension defaults, like vendor CPUs.
This is the minimum extension set to boot OpenSBI and buildroot using
rv64i:
./build/qemu-system-riscv64 -nographic -M virt \
-cpu rv64i,sv39=true,g=true,c=true,s=true,u=true
Our minimal riscv,isa in this case will be:
# cat /proc/device-tree/cpus/cpu@0/riscv,isa
rv64imafdc_zicntr_zicsr_zifencei_zihpm_zca_zcd#
[1] https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll add a new bare CPU type that won't have any default priv_ver. This
means that the CPU will default to priv_ver = 0, i.e. 1.10.0.
At the same we'll allow these CPUs to enable extensions at will, but
then, if the extension has a priv_ver newer than 1.10, we'll end up
disabling it. Users will then need to manually set priv_ver to something
other than 1.10 to enable the extensions they want, which is not ideal.
Change the setter() of extensions to allow user enabled extensions to
bump the priv_ver of the CPU. This will make it convenient for users to
enable extensions for CPUs that doesn't set a default priv_ver.
This change does not affect any existing CPU: vendor CPUs does not allow
extensions to be enabled, and generic CPUs are already set to priv_ver
LATEST.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our current logic in get/setters of MISA and multi-letter extensions
works because we have only 2 CPU types, generic and vendor, and by using
"!generic" we're implying that we're talking about vendor CPUs. When adding
a third CPU type this logic will break so let's handle it beforehand.
In set_misa_ext_cfg() and set_multi_ext_cfg(), check for "vendor" cpu instead
of "not generic". The "generic CPU" checks remaining are from
riscv_cpu_add_misa_properties() and cpu_add_multi_ext_prop() before
applying default values for the extensions.
This leaves us with:
- vendor CPUs will not allow extension enablement, all other CPUs will;
- generic CPUs will inherit default values for extensions, all others
won't.
And now we can add a new, third CPU type, that will allow extensions to
be enabled and will not inherit defaults, without changing the existing
logic.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We want to add a new CPU type for bare CPUs that will inherit specific
traits of the 2 existing types:
- it will allow for extensions to be enabled/disabled, like generic
CPUs;
- it will NOT inherit defaults, like vendor CPUs.
We can make this conditions met by adding an explicit type for the
existing vendor CPUs and change the existing logic to not imply that
"not generic" means vendor CPUs.
Let's add the "vendor" CPU type first.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The interrupts-extended property of PLIC only has 2 * hart number
fields when KVM enabled, copy 4 * hart number fields to fdt will
expose some uninitialized value.
In this patch, I also refactor the code about the setting of
interrupts-extended property of PLIC for improved readability.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231218090543.22353-1-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
ACPI DSDT generator needs information like ECAM range, PIO range, 32-bit
and 64-bit PCI MMIO range etc related to the PCI host bridge. Instead of
making these values machine specific, create properties for the GPEX
host bridge with default value 0. During initialization, the firmware
can initialize these properties with correct values for the platform.
This basically allows DSDT generator code independent of the machine
specific memory map accesses.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231218150247.466427-11-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
kvm_riscv_reg_id() returns an id encoded with an ulong size, i.e. an u32
size when running TARGET_RISCV32 and u64 when running TARGET_RISCV64.
Rename it to kvm_riscv_reg_id_ulong() to enhance code readability. It'll
be in line with the existing kvm_riscv_reg_id_<size>() helpers.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231208183835.2411523-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM_REG_RISCV_FP_F regs have u32 size according to the API, but by using
kvm_riscv_reg_id() in RISCV_FP_F_REG() we're returning u64 sizes when
running with TARGET_RISCV64. The most likely reason why no one noticed
this is because we're not implementing kvm_cpu_synchronize_state() in
RISC-V yet.
Create a new helper that returns a KVM ID with u32 size and use it in
RISCV_FP_F_REG().
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231208183835.2411523-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mvendorid is an uint32 property, mimpid/marchid are uint64 properties.
But their getters are returning bools. The reason this went under the
radar for this long is because we have no code using the getters.
The problem can be seem via the 'qom-get' API though. Launching QEMU
with the 'veyron-v1' CPU, a model with:
VEYRON_V1_MVENDORID: 0x61f (1567)
VEYRON_V1_MIMPID: 0x111 (273)
VEYRON_V1_MARCHID: 0x8000000000010000 (9223372036854841344)
This is what the API returns when retrieving these properties:
(qemu) qom-get /machine/soc0/harts[0] mvendorid
true
(qemu) qom-get /machine/soc0/harts[0] mimpid
true
(qemu) qom-get /machine/soc0/harts[0] marchid
true
After this patch:
(qemu) qom-get /machine/soc0/harts[0] mvendorid
1567
(qemu) qom-get /machine/soc0/harts[0] mimpid
273
(qemu) qom-get /machine/soc0/harts[0] marchid
9223372036854841344
Fixes: 1e34150045 ("target/riscv/cpu.c: restrict 'mvendorid' value")
Fixes: a1863ad368 ("target/riscv/cpu.c: restrict 'mimpid' value")
Fixes: d6a427e2c0 ("target/riscv/cpu.c: restrict 'marchid' value")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231211170732.2541368-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Sv32 page-based virtual-memory scheme described in RISCV privileged
spec Section 5.3 supports 34-bit physical addresses for RV32, so the
PMP scheme must support addresses wider than XLEN for RV32. However,
PMP address register format is still 32 bit wide.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231123091214.20312-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The ratified version of RISC-V V spec section 16.6 says that
`The instructions operate as if EEW=SEW`.
So the whole vector register move instructions depend on the vtype
register that means the whole vector register move instructions should
raise an illegal-instruction exception when vtype.vill=1.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231129170400.21251-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We already print various lines of information when we take an
exception, including the ELR and (if relevant) the FAR. Now
that FEAT_NV means that we might report something other than
the old PSTATE to the guest as the SPSR, it's worth logging
this as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
When interpreting CPU dumps where FEAT_NV and FEAT_NV2 are in use,
it's helpful to include the values of HCR_EL2.{NV,NV1,NV2} in the CPU
dump format, as a way of distinguishing when we are in EL1 as part of
executing guest-EL2 and when we are just in normal EL1.
Add the bits to the end of the log line that shows PSTATE and similar
information:
PSTATE=000003c9 ---- EL2h BTYPE=0 NV NV2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs for the GIC CPU registers to indicate
the offsets from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ
in the Arm ARM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This covers all the remaining offsets at 0x200 and
above, except for the GIC ICH_* registers.
(Note that because we don't implement FEAT_SPE, FEAT_TRF,
FEAT_MPAM, FEAT_BRBE or FEAT_AMUv1p1 we don't implement any
of the registers that use offsets at 0x800 and above.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This commit covers offsets 0x168 to 0x1f8.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This commit covers offsets 0x100 to 0x160.
Many (but not all) of the registers in this range have _EL12 aliases,
and the slot in memory is shared between the _EL12 version of the
register and the _EL1 version. Where we programmatically generate
the regdef for the _EL12 register, arrange that its
nv2_redirect_offset is set up correctly to do this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This commit covers offsets below 0x100; all of these
registers are redirected to memory regardless of the value of
HCR_EL2.NV1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
If FEAT_NV2 redirects a system register access to a memory offset
from VNCR_EL2, that access might fault. In this case we need to
report the correct syndrome information:
* Data Abort, from same-EL
* no ISS information
* the VNCR bit (bit 13) is set
and the exception must be taken to EL2.
Save an appropriate syndrome template when generating code; we can
then use that to:
* select the right target EL
* reconstitute a correct final syndrome for the data abort
* report the right syndrome if we take a FEAT_RME granule protection
fault on the VNCR-based write
Note that because VNCR is bit 13, we must start keeping bit 13 in
template syndromes, by adjusting ARM_INSN_START_WORD2_SHIFT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV2 requires that when HCR_EL2.{NV,NV2} == 0b11 then accesses by
EL1 to certain system registers are redirected to RAM. The full list
of affected registers is in the table in rule R_CSRPQ in the Arm ARM.
The registers may be normally accessible at EL1 (like ACTLR_EL1), or
normally UNDEF at EL1 (like HCR_EL2). Some registers redirect to RAM
only when HCR_EL2.NV1 is 0, and some only when HCR_EL2.NV1 is 1;
others trap in both cases.
Add the infrastructure for identifying which registers should be
redirected and turning them into memory accesses.
This code does not set the correct syndrome or arrange for the
exception to be taken to the correct target EL if the access via
VNCR_EL2 faults; we will do that in the next commit.
Subsequent commits will mark up the relevant regdefs to set their
nv2_redirect_offset, and if relevant one of the two flags which
indicates that the redirect happens only for a particular value of
HCR_EL2.NV1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Under FEAT_NV2, when HCR_EL2.{NV,NV2} == 0b11 at EL1, accesses to the
registers SPSR_EL2, ELR_EL2, ESR_EL2, FAR_EL2 and TFSR_EL2 (which
would UNDEF without FEAT_NV or FEAT_NV2) should instead access the
equivalent EL1 registers SPSR_EL1, ELR_EL1, ESR_EL1, FAR_EL1 and
TFSR_EL1.
Because there are only five registers involved and the encoding for
the EL1 register is identical to that of the EL2 register except
that opc1 is 0, we handle this by finding the EL1 register in the
hash table and using it instead.
Note that traps that apply to direct accesses to the EL1 register,
such as active fine-grained traps or other trap bits, do not trigger
when it is accessed via the EL2 encoding in this way. However, some
traps that are defined by the EL2 register may apply. We therefore
call the EL2 register's accessfn first. The only one of the five
which has such traps is TFSR_EL2: make sure its accessfn correctly
handles both FEAT_NV (where we trap to EL2 without checking ATA bits)
and FEAT_NV2 (where we check ATA bits and then redirect to TFSR_EL1).
(We don't need the NV1 tbflag bit until the next patch, but we
introduce it here to avoid putting the NV, NV1, NV2 bits in an
odd order.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
For FEAT_NV2, a new system register VNCR_EL2 holds the base
address of the memory which nested-guest system register
accesses are redirected to. Implement this register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Enable FEAT_NV on the 'max' CPU, and stop filtering it out for the
Neoverse N2 and Neoverse V1 CPUs. We continue to downgrade FEAT_NV2
support to FEAT_NV for the latter two CPU types.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV requires that when HCR_EL2.{NV,NV1} == {1,1} the handling
of some of the page table attribute bits changes for the EL1&0
translation regime:
* for block and page descriptors:
- bit [54] holds PXN, not UXN
- bit [53] is RES0, and the effective value of UXN is 0
- bit [6], AP[1], is treated as 0
* for table descriptors, when hierarchical permissions are enabled:
- bit [60] holds PXNTable, not UXNTable
- bit [59] is RES0
- bit [61], APTable[0] is treated as 0
Implement these changes to the page table attribute handling.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV requires (per I_JKLJK) that when HCR_EL2.{NV,NV1} is {1,1} the
unprivileged-access instructions LDTR, STTR etc behave as normal
loads and stores. Implement the check that handles this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
For FEAT_NV, when HCR_EL2.{NV,NV1} is {1,1} PAN is always disabled
even when the PSTATE.PAN bit is set. Implement this by having
arm_pan_enabled() return false in this situation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Currently the code in target/arm/helper.c mostly checks the PAN bits
in env->pstate or env->uncached_cpsr directly when it wants to know
if PAN is enabled, because in most callsites we know whether we are
in AArch64 or AArch32. We do have an arm_pan_enabled() function, but
we only use it in a few places where the code might run in either an
AArch32 or AArch64 context.
For FEAT_NV, when HCR_EL2.{NV,NV1} is {1,1} PAN is always disabled
even when the PSTATE.PAN bit is set, the "is PAN enabled" test
becomes more complicated. Make all places that check for PAN use
arm_pan_enabled(), so we have a place to put the FEAT_NV test.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
When HCR_EL2.{NV,NV1} is {1,1} we must trap five extra registers to
EL2: VBAR_EL1, ELR_EL1, SPSR_EL1, SCXTNUM_EL1 and TFSR_EL1.
Implement these traps.
This trap does not apply when FEAT_NV2 is implemented and enabled;
include the check that HCR_EL2.NV2 is 0 here, to save us having
to come back and add it later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV requires that when HCR_EL2.{NV,NV1} == {1,0} and an exception
is taken from EL1 to EL1 then the reported EL in SPSR_EL1.M should be
EL2, not EL1. Implement this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV requires that when HCR_EL2.NV is set reads of the CurrentEL
register from EL1 always report EL2 rather than the real EL.
Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
For FEAT_NV, accesses to system registers and instructions from EL1
which would normally UNDEF there but which work in EL2 need to
instead be trapped to EL2. Detect this both for "we know this will
UNDEF at translate time" and "we found this UNDEFs at runtime", and
make the affected registers trap to EL2 instead.
The Arm ARM defines the set of registers that should trap in terms
of their names; for our implementation this would be both awkward
and inefficent as a test, so we instead trap based on the opc1
field of the sysreg. The regularity of the architectural choice
of encodings for sysregs means that in practice this captures
exactly the correct set of registers.
Regardless of how we try to define the registers this trapping
applies to, there's going to be a certain possibility of breakage
if new architectural features introduce new registers that don't
follow the current rules (FEAT_MEC is one example already visible
in the released sysreg XML, though not yet in the Arm ARM). This
approach seems to me to be straightforward and likely to require
a minimum of manual overrides.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
In handle_sys() we don't do the check for whether the register is
marked as needing an FPU/SVE/SME access check until after we've
handled the special cases covered by ARM_CP_SPECIAL_MASK. This is
conceptually the wrong way around, because if for example we happen
to implement an FPU-access-checked register as ARM_CP_NOP, we should
do the access check first.
Move the access checks up so they are with all the other access
checks, not sandwiched between the special-case read/write handling
and the normal-case read/write handling. This doesn't change
behaviour at the moment, because we happen not to define any
cpregs with both ARM_CPU_{FPU,SVE,SME} and one of the cases
dealt with by ARM_CP_SPECIAL_MASK.
Moving this code also means we have the correct place to put the
FEAT_NV/FEAT_NV2 access handling, which should come after the access
checks and before we try to do any read/write action.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV and FEAT_NV2 will allow EL1 to attempt to access cpregs that
only exist at EL2. This means we're going to want to run their
accessfns when the CPU is at EL1. In almost all cases, the behaviour
we want is "the accessfn returns OK if at EL1".
Mostly the accessfn already does the right thing; in a few cases we
need to explicitly check that the EL is not 1 before applying various
trap controls, or split out an accessfn used both for an _EL1 and an
_EL2 register into two so we can handle the FEAT_NV case correctly
for the _EL2 register.
There are two registers where we want the accessfn to trap for
a FEAT_NV EL1 access: VSTTBR_EL2 and VSTCR_EL2 should UNDEF
an access from NonSecure EL1, not trap to EL2 under FEAT_NV.
The way we have written sel2_access() already results in this
behaviour.
We can identify the registers we care about here because they
all have opc1 == 4 or 5.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The alias registers like SCTLR_EL12 only exist when HCR_EL2.E2H
is 1; they should UNDEF otherwise. We weren't implementing this.
Add an intercept of the accessfn for these aliases, and implement
the UNDEF check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
For FEAT_VHE, we define a set of register aliases, so that for instance:
* the SCTLR_EL1 either accesses the real SCTLR_EL1, or (if E2H is 1)
SCTLR_EL2
* a new SCTLR_EL12 register accesses SCTLR_EL1 if E2H is 1
However when we create the 'new_reg' cpreg struct for the SCTLR_EL12
register, we duplicate the information in the SCTLR_EL1 cpreg, which
means the opcode fields are those of SCTLR_EL1, not SCTLR_EL12. This
is a problem for code which looks at the cpreg opcode fields to
determine behaviour (e.g. in access_check_cp_reg()). In practice
the current checks we do there don't intersect with the *_EL12
registers, but for FEAT_NV this will become a problem.
Write the correct values from the encoding into the new_reg struct.
This restores the invariant that the cpreg that you get back
from the hashtable has opcode fields that match the key you used
to retrieve it.
When we call the readfn or writefn for the target register, we
pass it the cpreg struct for that target register, not the one
for the alias, in case the readfn/writefn want to look at the
opcode fields to determine behaviour. This means we need to
interpose custom read/writefns for the e12 aliases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The TBFLAG_A64 TB flag bits go in flags2, which for AArch64 guests
we know is 64 bits. However at the moment we use FIELD_EX32() and
FIELD_DP32() to read and write these bits, which only works for
bits 0 to 31. Since we're about to add a flag that uses bit 32,
switch to FIELD_EX64() and FIELD_DP64() so that this will work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The HCR_EL2.TSC trap for trapping EL1 execution of SMC instructions
has a behaviour change for FEAT_NV when EL3 is not implemented:
* in older architecture versions TSC was required to have no
effect (i.e. the SMC insn UNDEFs)
* with FEAT_NV, when HCR_EL2.NV == 1 the trap must apply
(i.e. SMC traps to EL2, as it already does in all cases when
EL3 is implemented)
* in newer architecture versions, the behaviour either without
FEAT_NV or with FEAT_NV and HCR_EL2.NV == 0 is relaxed to
an IMPDEF choice between UNDEF and trap-to-EL2 (i.e. it is
permitted to always honour HCR_EL2.TSC) for AArch64 only
Add the condition to honour the trap bit when HCR_EL2.NV == 1. We
leave the HCR_EL2.NV == 0 case with the existing (UNDEF) behaviour,
as our IMPDEF choice (both because it avoids a behaviour change
for older CPU models and because we'd have to distinguish AArch32
from AArch64 if we opted to trap to EL2).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
When FEAT_NV is turned on via the HCR_EL2.NV bit, ERET instructions
are trapped, with the same syndrome information as for the existing
FEAT_FGT fine-grained trap (in the pseudocode this is handled in
AArch64.CheckForEretTrap()).
Rename the DisasContext and tbflag bits to reflect that they are
no longer exclusively for FGT traps, and set the tbflag bit when
FEAT_NV is enabled as well as when the FGT is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV defines three new bits in HCR_EL2: NV, NV1 and AT. When the
feature is enabled, allow these bits to be written, and flush the
TLBs for the bits which affect page table interpretation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The hypervisor can deliver (virtual) LPIs to a guest by setting up a
list register to have an intid which is an LPI. The GIC has to treat
these a little differently to standard interrupt IDs, because LPIs
have no Active state, and so the guest will only EOI them, it will
not also deactivate them. So icv_eoir_write() must do two things:
* if the LPI ID is not in any list register, we drop the
priority but do not increment the EOI count
* if the LPI ID is in a list register, we immediately deactivate
it, regardless of the split-drop-and-deactivate control
This can be seen in the VirtualWriteEOIR0() and VirtualWriteEOIR1()
pseudocode in the GICv3 architecture specification.
Without this fix, potentially a hypervisor guest might stall because
LPIs get stuck in a bogus Active+Pending state.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The CTR_EL0 register has some bits which allow the implementation to
tell the guest that it does not need to do cache maintenance for
data-to-instruction coherence and instruction-to-data coherence.
QEMU doesn't emulate caches and so our cache maintenance insns are
all NOPs.
We already have some models of specific CPUs where we set these bits
(e.g. the Neoverse V1), but the 'max' CPU still uses the settings it
inherits from Cortex-A57. Set the bits for 'max' as well, so the
guest doesn't need to do unnecessary work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
A SoC will not have a direct access to the NVIC embedded in its ARM
core. By aliasing the "num-prio-bits" property similarly to what is
done for the "num-irq" one, a SoC can easily configure it on its
armv7m instance.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240106181503.1746200-3-sam@rfc1149.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Record/replay fixes for replay_kernel tests
- add a 32 bit x86 replay test case
- fix some typos
- use modern snapshot setting for tests
- update replay_dump for current ABI
- remove stale replay variables
- improve kdoc for ReplayState
- introduce common error path for replay
- always fully drain chardevs when in replay
- catch unexpected waitio on playback
- remove flaky tags from replay_kernel tests
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmWcAJgACgkQ+9DbCVqe
# KkS/TQf+PuIPtuX71ENajfRBjz6450IbGqLUJ1HEaPGYGRj+fR6rg5g5u8qaBrT7
# TUv9ef9L22NtyL+Gbs1OGpGDWKoqV6RQc+A/MHa8IKFpcS24nUo3k4psIC6NSGRH
# 6w3++fPC1Q5cDk9Lei3Qt8fXzcnUZz+NTiIK05aC0xh7D6uGfdADvKqHeLav7qi+
# X2ztNdBsy/WJWCuWcMVzb/dGwDBtuyyxvqTD4EF+zn+gSYq9od2G8XdF+0o6ZVLM
# mXEHwNwB6UjOkLt2cYaay59SXcJFvwxKbEGTDnA7T+kgd3rknuBaWdVBIazoSPQh
# +522nPz5qq/3wO1l7+iQXuvd38fWyw==
# =nKRx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 08 Jan 2024 14:03:04 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-replay-fixes-080124-1' of https://gitlab.com/stsquad/qemu:
tests/avocado: remove skips from replay_kernel
chardev: force write all when recording replay logs
replay: stop us hanging in rr_wait_io_event
replay/replay-char: use report_sync_error
replay: introduce a central report point for sync errors
replay: make has_unread_data a bool
replay: add proper kdoc for ReplayState
replay: remove host_clock_last
scripts/replay_dump: track total number of instructions
scripts/replay-dump: update to latest format
tests/avocado: modernise the drive args for replay_linux
tests/avocado: fix typo in replay_linux
tests/avocado: add a simple i386 replay kernel test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_context_set_aio_params() doesn't use its undocumented
Error** argument. Remove it to simplify.
Note this removes a use of "unchecked Error**" in
iothread_set_aio_context_params().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231120171806.19361-1-philmd@linaro.org>
QEMU complains about us not being explicit with setting snapshot so
lets do that. Also as cdroms are RO media we don't need to jump the
hoops of setting up snapshots and replay disks - just declare the
drive is a cdrom and nothing should change.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-4-alex.bennee@linaro.org>
vfio queue:
* Minor cleanups
* Fix for a regression in device reset introduced in 8.2
* Coverity fixes, including the removal of the iommufd backend mutex
* Introduced VFIOIOMMUClass, to avoid compiling spapr when !CONFIG_PSERIES
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmWbIrcACgkQUaNDx8/7
# 7KFtPRAAxWcH9uh4tjJe4CgL+wXC+JOgviiNaI3AS6KmxdTHXcAvXMNAiGJfTBo4
# y/lJg+PYNgcDWrOqZqp1jj6ulWpO8ekLD9Nxv03e6o3kaArX/o2MtsrndOtWYnG/
# CUrr+/kTNeEw9008OaOca9vuh03xh3AnSwb3DzjHTvpMkj5LTXzuE1mU50DTUkn9
# GZjuN3rqHcdjJ/fXpiS6IgJbxcxLdo2aSykmyuq+TZmGf02lTES94PRef3Btr7Q6
# sKQZpv+A+gcZ8DHDJqfOEzEgu1OSa257q4ic47O1X3CeSyiGTGQ7rVKHtX6bK7xP
# mB9WOVqzzdH/g+kHNG+kVXMCQXZ0qo7VlIkHabYD220RryZBCqMecQ4aKPLFULQE
# e7C5ZaEvb7TLe/EaEQUSFrLCns7Nq6ciurcoAmP0cn2Ef1Sr1luNQVAR9LWRH1pc
# 1TeNmHy4nQygT0dQtFBXwNUZfnTuGcKdr43twReiCjX1ViPBU4lrcajVQH4rAuoe
# K/bBak2Kyi1LsFn8AzIwKXZZl83L57EyL+XEW8i5GN1jFSAHFx4ocUq8NQBa//kS
# xei9LV3HEJbAMOQsPO8HEK40mg5WR17s22AUClMqtD2DAQbPUrmcLbZ6Ttq6hTuV
# BqL56JFjbfML5RGjxwF9G8v5mdLmLlNRCGF2KI3NsT7dkMbVh24=
# =zvPi
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 07 Jan 2024 22:16:23 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20240107' of https://github.com/legoater/qemu:
backends/iommufd: Remove mutex
backends/iommufd: Remove check on number of backend users
vfio/migration: Add helper function to set state or reset device
vfio/container: Rename vfio_init_container to vfio_set_iommu
vfio/iommufd: Remove the use of stat() to check file existence
hw/vfio: fix iteration over global VFIODevice list
vfio/container: Replace basename with g_path_get_basename
vfio/iommufd: Remove CONFIG_IOMMUFD usage
vfio/spapr: Only compile sPAPR IOMMU support when needed
vfio/iommufd: Introduce a VFIOIOMMU iommufd QOM interface
vfio/spapr: Introduce a sPAPR VFIOIOMMU QOM interface
vfio/container: Intoduce a new VFIOIOMMUClass::setup handler
vfio/container: Introduce a VFIOIOMMU legacy QOM interface
vfio/container: Introduce a VFIOIOMMU QOM interface
vfio/container: Initialize VFIOIOMMUOps under vfio_init_container()
vfio/container: Introduce vfio_legacy_setup() for further cleanups
vfio/spapr: Extend VFIOIOMMUOps with a release handler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pull-loongarch-20240106
Fixs patch conflict
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZZi5pAAKCRBAov/yOSY+
# 35iIA/4uXw92i0HJ3KK9NxzZlP9gwld6dATvincKNUpUgplK3NtBpRlVKm9NzLH8
# Jdg84k7D5pNXfWAfomT+R3UMnL8R/zZZqeCCd60JE0Kbn4gCyCou2QuLKuWxPvNM
# Jklf4mifq+gplg7lDF0GTLo8MUzhAmV8AuG7lUZb6IQJ68ui8A==
# =NnLa
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 06 Jan 2024 02:23:32 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240106' of https://gitlab.com/gaosong/qemu:
target/loongarch: move translate modules to tcg/
target/loongarch/meson: move gdbstub.c to loongarch.ss
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity reports a concurrent data access violation because be->users
is being accessed in iommufd_backend_can_be_deleted() without holding
the mutex.
However, these routines are called from the QEMU main thread when a
device is created. In this case, the code paths should be protected by
the BQL lock and it should be safe to drop the IOMMUFD backend mutex.
Simply remove it.
Fixes: CID 1531550
Fixes: CID 1531549
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
QOM already has a ref count on objects and it will assert much
earlier, when INT_MAX is reached.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
There are several places where failure in setting the device state leads
to a device reset, which is done by setting ERROR as the recover state.
Add a helper function that sets the device state and resets the device
in case of failure. This will make the code cleaner and remove duplicate
comments.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
vfio_container_init() and vfio_init_container() names are confusing
especially when we see vfio_init_container() calls vfio_container_init().
vfio_container_init() operates on base container which is consistent
with all routines handling 'VFIOContainerBase *' ops.
vfio_init_container() operates on legacy container and setup IOMMU
context with ioctl(VFIO_SET_IOMMU).
So choose to rename vfio_init_container to vfio_set_iommu to avoid
the confusion.
No functional change intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Using stat() before opening a file or a directory can lead to a
time-of-check to time-of-use (TOCTOU) filesystem race, which is
reported by coverity as a Security best practices violations. The
sequence could be replaced by open and fdopendir but it doesn't add
much in this case. Simply use opendir to avoid the race.
Fixes: CID 1531551
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <Zhenzhong.duan@intel.com>
Availability of the IOMMUFD backend can now be fully determined at
runtime and the ifdef check was a build time protection (for PPC not
supporting it mostly).
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
sPAPR IOMMU support is only needed for pseries machines. Compile out
support when CONFIG_PSERIES is not set. This saves ~7K of text.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
As previously done for the sPAPR and legacy IOMMU backends, convert
the VFIOIOMMUOps struct to a QOM interface. The set of of operations
for this backend can be referenced with a literal typename instead of
a C struct.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Move vfio_spapr_container_setup() to a VFIOIOMMUClass::setup handler
and convert the sPAPR VFIOIOMMUOps struct to a QOM interface. The
sPAPR QOM interface inherits from the legacy QOM interface because
because both have the same basic needs. The sPAPR interface is then
extended with the handlers specific to the sPAPR IOMMU.
This allows reuse and provides better abstraction of the backends. It
will be useful to avoid compiling the sPAPR IOMMU backend on targets
not supporting it.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Convert the legacy VFIOIOMMUOps struct to the new VFIOIOMMU QOM
interface. The set of of operations for this backend can be referenced
with a literal typename instead of a C struct. This will simplify
support of multiple backends.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIOContainerBase was not introduced as an abstract QOM object because
it felt unnecessary to expose all the IOMMU backends to the QEMU
machine and human interface. However, we can still abstract the IOMMU
backend handlers using a QOM interface class. This provides more
flexibility when referencing the various implementations.
Simply transform the VFIOIOMMUOps struct in an InterfaceClass and do
some initial name replacements. Next changes will start converting
VFIOIOMMUOps.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_init_container() already defines the IOMMU type of the container.
Do the same for the VFIOIOMMUOps struct. This prepares ground for the
following patches that will deduce the associated VFIOIOMMUOps struct
from the IOMMU type.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This will help subsequent patches to unify the initialization of type1
and sPAPR IOMMU backends.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This allows to abstract a bit more the sPAPR IOMMU support in the
legacy IOMMU backend.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
If "busses" might be encountered as a plural of "bus" (5 instances),
the correct spelling is "buses" (26 instances). Fixing those 5
instances makes the doc more consistent.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The edu_check_range function checks that start <= end1 < end2, where
end1 is the upper bound (exclusive) of the guest-supplied DMA range and
end2 is the upper bound (exclusive) of the device's allowed DMA range.
When the guest tries to transfer exactly DMA_SIZE (4096) bytes, end1
will be equal to end2, so the check fails and QEMU aborts with this
puzzling error message (newlines added for formatting):
qemu: hardware error: EDU: DMA range
0x0000000000040000-0x0000000000040fff out of bounds
(0x0000000000040000-0x0000000000040fff)!
By checking end1 <= end2 instead, guests will be allowed to transfer
exactly 4096 bytes. It is not necessary to explicitly check for
start <= end1 because the previous two checks (within(addr, start, end2)
and end1 > addr) imply start < end1.
Fixes: b30934cb52 ("hw: misc, add educational driver", 2015-01-21)
Signed-off-by: Max Erenberg <merenber@uwaterloo.ca>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Testing upstream U-Boot with 'sifive_u' machine we see:
=> dhcp
ethernet@10090000: PHY present at 0
Could not get PHY for ethernet@10090000: addr 0
phy_connect failed
This has been working till QEMU 8.1 but broken since QEMU 8.2.
Fixes: 1b09eeb122 ("hw/net/cadence_gem: use FIELD to describe PHYMNTNC register fields")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
error_setg() appends newline to the formatted message.
Fixes: cb94ff5f80 ("audio: propagate Error * out of audio_init")
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Current error message:
qemu-system-x86_64: -chardev spice,id=foo: Parameter 'driver' expects an abstract device type
while in fact the meaning is in reverse, -chardev expects
a non-abstract device type.
Fixes: 777357d758 ("chardev: qom-ify" 2016-12-07)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
The mcycle/minstret counter's stop flag is mistakenly updated on a copy
on stack. Thus the counter increments even when the CY/IR bit in the
mcountinhibit register is set. This commit corrects its behavior.
Fixes: 3780e33732 (target/riscv: Support mcycle/minstret write operation)
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
HW core patch queue
- Unify CPU QOM type checks (Gavin)
- Simplify uses of some CPU related property (Philippe)
(start-powered-off, ARM reset-cbar and mp-affinity)
- Header and documentation cleanups (Zhao, Philippe)
- Have Memory API return boolean indicating possible error
- Fix frame filter mask in CAN sja1000 model (Pavel)
- QOM embed MCF5206 timer into SoC (Thomas)
- Simplify LEON3 qemu_irq_ack handler (Clément)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmWYIxwACgkQ4+MsLN6t
# wN66fA//UBwgYqcdpg6Wz17qzgq1TWeZHHzYh7HbZRUCxhdSgS6TSQOH9Fi8VNYq
# Ed5a5l4ovP/2NRN1/S5PPBydyKXTU7wintHm2+suQbLSmplIE6yr0Ca6o8FLEeJ3
# hnE0dAoQCLS7eDpoeOEpGjzmJFiBSWLvyqAZLa/rZkCnCiZRHB6g/nAEM8I3I9bl
# //H20d3a/fektZxGnpEAeoMxrl4iA9hkFYVW8lbu6EhNFBPUkkj5Y8w47Kq/BIvD
# NmLTPgu4d7oahwlfsM6jWdRDG9zlEkXQor817PHwl00o45yAfeITsy40GvJeEYaI
# BcDLFfWrSm9SQb7/suXGeyU/SLmx7rsmJWfNYUoMr6807QcSH4ScPCfgzEQ4j8IV
# PmeVsxxLxT9CSzfxhMx5cXt33H2l+tEzwJ5UJCLQvmvTu+aDkt46Q09X/7j0z89m
# zSk/HBtdACIzwEWBAJsKuzarRTZNUvyXEsOxZ5l7xOxJpzpsNV2YVuChClVGtHOJ
# kr1PE2hxEMPY1vDyKU6ckDvW+XXgYhOXrPAxdx8gIwwd4oyDC5vVlIajvlqbOAsp
# Es7zq40b/is3ZnByEDbZ+yYvdYRLtVf/lDPK3KIv7IhrTNzH/HT1egshOQAVirY1
# Gw8f3fXqL3/84w383VI4efrSlKBJeb0i2SJ50y2N1clrF1qnlx0=
# =an4B
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 05 Jan 2024 15:41:16 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-cpus-20240105' of https://github.com/philmd/qemu: (71 commits)
target/sparc: Simplify qemu_irq_ack
hw/net/can/sja1000: fix bug for single acceptance filter and standard frame
hw/m68k/mcf5206: Embed m5206_timer_state in m5206_mbar_state
hw/pci-host/raven: Propagate error in raven_realize()
hw/nvram: Simplify memory_region_init_rom_device() calls
hw/misc: Simplify memory_region_init_ram_from_fd() calls
hw/sparc: Simplify memory_region_init_ram_nomigrate() calls
hw/arm: Simplify memory_region_init_rom() calls
hw: Simplify memory_region_init_ram() calls
misc: Simplify qemu_prealloc_mem() calls
util/oslib: Have qemu_prealloc_mem() handler return a boolean
backends: Reduce variable scope in host_memory_backend_memory_complete
backends: Have HostMemoryBackendClass::alloc() handler return a boolean
backends: Simplify host_memory_backend_memory_complete()
backends: Use g_autofree in HostMemoryBackendClass::alloc() handlers
memory: Have memory_region_init_ram_from_fd() handler return a boolean
memory: Have memory_region_init_ram_from_file() handler return a boolean
memory: Have memory_region_init_resizeable_ram() return a boolean
memory: Have memory_region_init_rom_device() handler return a boolean
memory: Simplify memory_region_init_rom_device_nomigrate() calls
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A CAN sja1000 standard frame filter mask has been computed and applied
incorrectly for standard frames when single Acceptance Filter Mode
(MOD_AFM = 1) has been selected. The problem has not been found
by Linux kernel testing because it uses dual filter mode (MOD_AFM = 0)
and leaves falters fully open.
The problem has been noticed by Grant Ramsay when testing with Zephyr
RTOS which uses single filter mode.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reported-by: Grant Ramsay <gramsay@enphaseenergy.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2028
Fixes: 733210e754 ("hw/net/can: SJA1000 chip register level emulation")
Message-ID: <20240103231426.5685-1-pisa@fel.cvut.cz>
Return early if bc->alloc is NULL. De-indent the if() ladder.
Note, this avoids a pointless call to error_propagate() with
errp=NULL at the 'out:' label.
Change trivial when reviewed with 'git-diff --ignore-all-space'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-16-philmd@linaro.org>
Following the example documented since commit e3fe3988d7
("error: Document Error API usage rules"), have
memory_region_init_rom_device_nomigrate() return a boolean
indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-9-philmd@linaro.org>
There is no universal BIOS, each machine needs a specific one.
Move the machine-specific definitions to each machine code and
remove this bogus header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231122184334.18201-1-philmd@linaro.org>
The 'start-powered-off' property has been added to ARM CPUs in
commit 5de164304a ("arm: Allow secondary KVM CPUs to be booted
via PSCI"), then eventually got generalized to all CPUs in commit
c1b701587e ("target/arm: Move start-powered-off property to generic
CPUState"). Since all CPUs have it, no need to check whether it is
available. Updating this property can't fail, so use &error_abort.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231123143813.42632-5-philmd@linaro.org>
CPUState::start_powered_off field is part of the internal
implementation of a QDev CPU. It is exposed as the QDev
"start-powered-off" property. External components should
use the qdev properties API to access it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20231123143813.42632-2-philmd@linaro.org>
The 'mp-affinity' property is present since commit 15a21fe028
("target-arm: Add mp-affinity property for ARM CPU class").
Use it and remove a /* TODO */ comment. Since all ARM CPUs
have this property, use &error_abort, because this call can
not fail.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231123143813.42632-4-philmd@linaro.org>
bcm2836_realize() is called by
- bcm2836_class_init() which sets:
bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7")
- bcm2837_class_init() which sets:
bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a53")
Both Cortex-A7 / A53 have the ARM_FEATURE_CBAR set. If it isn't,
then this is a programming error: use &error_abort.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231123143813.42632-3-philmd@linaro.org>
Remove unused header (qemu/module.h and qemu/cutils.h) in cluster.c,
and reorder the remaining header files (except qemu/osdep.h) in
alphabetical order.
Tested by "./configure" and then "make".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231127145611.925817-3-zhao1.liu@linux.intel.com>
Remove unused header (qemu/module.h and sysemu/cpus.h) in core.c,
and reorder the remaining header files (except qemu/osdep.h) in
alphabetical order.
Tested by "./configure" and then "make".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231127145611.925817-2-zhao1.liu@linux.intel.com>
The 'host' CPU model isn't available until KVM or HVF is enabled.
For example, the following error messages are seen when the guest
is started with option '-cpu cortex-a8' on tcg after the next commit
is applied to check the CPU type in machine_run_board_init().
ERROR:../hw/core/machine.c:1423:is_cpu_type_supported: \
assertion failed: (model != NULL)
Bail out! ERROR:../hw/core/machine.c:1423:is_cpu_type_supported: \
assertion failed: (model != NULL)
Aborted (core dumped)
Hide 'host' CPU model until KVM or HVF is enabled. With this applied,
the valid CPU models can be shown.
qemu-system-aarch64: Invalid CPU type: cortex-a8
The valid types are: cortex-a7, cortex-a15, cortex-a35, \
cortex-a55, cortex-a72, cortex-a76, cortex-a710, a64fx, \
neoverse-n1, neoverse-v1, neoverse-n2, cortex-a53, \
cortex-a57, max
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231204004726.483558-6-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The names of supported CPU models instead of CPU types should be
printed when the user specified CPU type isn't supported, to be
consistent with the output from '-cpu ?'.
Correct the error messages to print CPU model names instead of CPU
type names.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231204004726.483558-5-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It's no sense to check the CPU type when mc->valid_cpu_types[0] is
NULL, which is a program error. Raise an assert on this.
A precise hint for the error message is given when mc->valid_cpu_types[0]
is the only valid entry. Besides, enumeration on mc->valid_cpu_types[0]
when we have mutiple valid entries there is avoided to increase the code
readability, as suggested by Philippe Mathieu-Daudé.
Besides, @cc comes from machine->cpu_type or mc->default_cpu_type. For
the later case, it can be NULL and it's also a program error. We should
use assert() in this case.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Message-ID: <20231204004726.483558-4-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The logic, to check if the specified CPU type is supported in
machine_run_board_init(), is independent enough. Factor it out into
helper is_cpu_type_supported(). machine_run_board_init() looks a bit
clean with this. Since we're here, @machine_class is renamed to @mc to
avoid multiple line spanning of code. The comments are tweaked a bit
either.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231204004726.483558-3-gshan@redhat.com>
[PMD: Only call new helper if machine->cpu_type is not NULL]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. The principle is violated by machine_run_board_init() because
it calls error_report(), error_printf(), and exit(1) when the machine
doesn't support the requested CPU type.
Clean this up by using error_setg() and error_append_hint() instead.
No functional change, as the only caller passes &error_fatal.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231204004726.483558-2-gshan@redhat.com>
[PMD: Correct error_append_hint() argument]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add generic cpu_list() to replace the individual target's implementation
in the subsequent commits. Currently, there are 3 targets with no cpu_list()
implementation: microblaze and nios2. With this applied, those two targets
switch to the generic cpu_list().
[gshan@gshan q]$ ./build/qemu-system-microblaze -cpu ?
Available CPUs:
microblaze-cpu
[gshan@gshan q]$ ./build/qemu-system-nios2 -cpu ?
Available CPUs:
nios2-cpu
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231114235628.534334-7-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add helper cpu_model_from_type() to extract the CPU model name from
the CPU type name in two circumstances: (1) The CPU type name is the
combination of the CPU model name and suffix. (2) The CPU type name
is same to the CPU model name.
The helper will be used in the subsequent commits to conver the
CPU type name to the CPU model name.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231114235628.534334-6-gshan@redhat.com>
[PMD: Mention returned string must be released with g_free()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
For all targets, the CPU class returned from CPUClass::class_by_name()
and object_class_dynamic_cast(oc, CPU_RESOLVING_TYPE) need to be
compatible. Lets apply the check in cpu_class_by_name() for once,
instead of having the check in CPUClass::class_by_name() for individual
target.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Message-ID: <20231114235628.534334-4-gshan@redhat.com>
'ev67' CPU class will be returned to match everything, which makes
no sense as mentioned in the comments. Remove the logic to fall
back to 'ev67' CPU class to match everything.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231114235628.534334-2-gshan@redhat.com>
[PMD: Reword subject, replace 'any' -> 'ev67' on linux-user]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
migration 1st pull for 9.0
- We lost Juan and Leo in the maintainers file
- Steven's suspend state fix
- Steven's fix for coverity on migrate_mode
- Avihai's migration cleanup series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZZY0TxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbSxgEAoM5g3wkc22lpAlRpU+hJUqT9NVOVQSK+
# Fk7XJYTdSgABAKzykA6hAmU5Kj+yVI6jI874SVZbs2FWpFs4osvsKk4D
# =sfuM
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 04 Jan 2024 04:30:07 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240104-pull-request' of https://gitlab.com/peterx/qemu: (26 commits)
migration: fix coverity migrate_mode finding
migration/multifd: Remove unnecessary usage of local Error
migration: Remove unnecessary usage of local Error
migration: Fix migration_channel_read_peek() error path
migration/multifd: Remove error_setg() in migration_ioc_process_incoming()
migration/multifd: Fix leaking of Error in TLS error flow
migration/multifd: Simplify multifd_channel_connect() if else statement
migration/multifd: Fix error message in multifd_recv_initial_packet()
migration: Remove errp parameter in migration_fd_process_incoming()
migration: Refactor migration_incoming_setup()
migration: Remove nulling of hostname in migrate_init()
migration: Remove migrate_max_downtime() declaration
tests/qtest: postcopy migration with suspend
tests/qtest: precopy migration with suspend
tests/qtest: option to suspend during migration
tests/qtest: migration events
migration: preserve suspended for bg_migration
migration: preserve suspended for snapshot
migration: preserve suspended runstate
migration: propagate suspended runstate
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To enable accelerated VirtIO GPUs for the guest we need the rendering
support on the host, which currently it's reported in the configuration
summary under the "dependencies" section. Add a graphics backend section
and report the status of the VirGL and Rutabaga support libraries.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231222114846.2850741-1-alex.bennee@linaro.org>
[Remove from dependencies as suggested by Philippe. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
config_all now lists only accelerators, rename it to indicate its actual
content.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_ALL is tricky to use and was ported over to Meson from the
recursive processing of Makefile variables. Meson sourcesets
however have all_sources() and all_dependencies() methods that
remove the need for it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
config_targetos is now empty and can be removed; its use in sourcesets
that do not involve target-specific files can be replaced with an empty
dictionary.
In fact, at this point *all* sourcesets that do not involve
target-specific files are just glorified mutable arrays. Enforce that
they never test for symbols in "when:" by computing the set of files
without "strict: false".
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keep it together with the other compiler modes, and before dependencies.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove assignments that match the default, and group the
targets for debian-legacy-test-cross and debian-all-test-cross
into a single arm.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not use a subshell to hide the shadowing of $config_host_mak.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While a simple lexicographic comparison usually works, it is less
robust than a more specific algorithm designed to compare versions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a 'current_lun' check for a null value
to avoid null pointer dereferencing and
recover host if NULL return
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4eb8606560 (esp: store lun coming from the MESSAGE OUT phase)
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Message-ID: <20231229152647.19699-1-adiupina@astralinux.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The main difficulty here is that a page fault when writing to the destination
must not overwrite the flags. Therefore, the flags computation must be
inlined instead of using gen_jcc1*.
For simplicity, I am using an unconditional cmpxchg operation, that becomes
a NOP if the comparison fails.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ALU instructions can write to both memory and flags. If the CC_SRC*
and CC_DST locations have been written already when a memory access
causes a fault, the value in CC_SRC* and CC_DST might be interpreted
with the wrong CC_OP (the one that is in effect before the instruction.
Besides just using the wrong result for the flags, something like
subtracting -1 can have disastrous effects if the current CC_OP is
CC_OP_EFLAGS: this is because QEMU does not expect bits outside the ALU
flags to be set in CC_SRC, and env->eflags can end up set to all-ones.
In the case of the attached testcase, this sets IOPL to 3 and would
cause an assertion failure if SUB is moved to the new decoder.
This mechanism is not really needed for BMI instructions, which can
only write to a register, but put it to use anyway for cleanliness.
In the case of BZHI, the code has to be modified slightly to ensure
that decode->cc_src is written, otherwise the new assertions trigger.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_jcc() has been changed to accept a relative offset since the
new decoder was written. Adjust the J operand, which is meant
to be used with jump instructions such as gen_jcc(), to not
include the program counter and to not truncate the result, as
both operations are now performed by common code.
The result is that J is now the same as the I operand.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to gen_setcc1, make gen_cmovcc1 receive TCGv. This is more friendly
to simultaneous implementation in the old and the new decoder.
A small wart is that s->T0 of CMOV is currently the *second* argument (which
would ordinarily be in T1). Therefore, the condition has to be inverted in
order to overwrite s->T0 with cpu_regs[reg] if the MOV is not performed.
This only applies to the old decoder, and this code will go away soon.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a new temporary, to ease the register allocator's work.
Creation of the temporary is pushed into gen_ext_tl, which
also allows NULL as the first parameter now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new x86 decoder wants the gen_* functions to compute EFLAGS before
writeback, which can be an issue for instructions with a memory
destination such as ARPL or shifts.
Extract code to compute the EFLAGS without clobbering CC_SRC, in case
the memory write causes a fault. The flags writeback mechanism will
take care of copying the result to CC_SRC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new decoder would rather have the operand in T0 when expanding SCAS, rather
than use R_EAX directly as gen_scas currently does. This makes SCAS more similar
to CMP and SUB, in that CC_DST = T0 - T1.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new decoder likes to compute the address in A0 very early, so the
gen_lea_v_seg in gen_pop_T0 would clobber the address of the memory
operand. Instead use T0 since it is already available and will be
overwritten immediately after.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
decode->mem is only used if one operand has has_ea == true. String
operations will not use decode->mem and will load A0 on their own, because
they are the only case of two memory operands in a single instruction.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Usually the registers are just moved into s->T0 without much care for
their operand size. However, in some cases we can get more efficient
code if the operand fetching logic syncs with the emission function
on what is nicer.
All the current uses are mostly demonstrative and only reduce the code
in the emission functions, because the instructions do not support
memory operands. However the logic is generic and applies to several
more instructions such as MOVSXD (aka movslq), one-byte shift
instructions, multiplications, XLAT, and indirect calls/jumps.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
X86_SPECIAL_ZExtOp0 and X86_SPECIAL_ZExtOp2 are poorly named; they are a hack
that is needed by scalar insertion and extraction instructions, and not really
related to zero extension: for PEXTR the zero extension is done by the generation
functions, for PINSR the high bits are not used at all and in fact are *not*
filled with zeroes when loaded into s->T1.
Rename the values to match the effect described in the manual, and explain
better in the comments.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use _tl operations for 32-bit operands on 32-bit targets, and only go
through trunc and extu ops for 64-bit targets. While the trunc/ext
ops should be pretty much free after optimization, the optimizer also
does not like having the same temporary used in multiple EBBs.
Therefore it is nicer to not use tmpN* unless necessary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous check erroneously allowed CMP to be modified with LOCK.
Instead, tag explicitly the instructions that do support LOCK.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cpu_cc_compute_all() has an argument that is always equal to CC_OP for historical
reasons (dating back to commit a7812ae412, "TCG variable type checking.", 2008-11-17,
which added the argument to helper_cc_compute_all). It does not make sense for the
argument to have any other value, so remove it and clean up some lines that are not
too long anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_lea_v_seg (called by gen_add_A0_ds_seg) already zeroes any
bits of s->A0 beyond s->aflag. It does so before summing the
segment base and, if not in 64-bit mode, also after summing it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take advantage of the fact that there can be no 1 bits between SF and OF.
If they were adjacent, you could sum SF and get a carry only if SF was
already set. Then the value of OF in the sum is the XOR of OF itself,
the carry (which is SF) and 0 (the value of the OF bit in the addend):
this is OF^SF exactly.
Because OF and SF are not adjacent, just place more 1 bits to the
left so that the carry propagates, which means summing CC_O - CC_S.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit c2118e9e1a ("configure: don't try a "native" cross for linux-user",
2023-11-23) sought to avoid issues with using the native compiler with a
cross-endian or cross-bitness setup. However, in doing so it ended up
requiring a cross compiler setup (and most likely a slow compiler setup)
even when building TCG tests that are native to the host architecture.
Always allow the host compiler in that case.
Cc: qemu-stable@nongnu.org
Fixes: c2118e9e1a ("configure: don't try a "native" cross for linux-user", 2023-11-23)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
