Otherwise, the index of an input device like a usb-kbd is silently accepted.
(qemu) info mice
Mouse #2: QEMU PS/2 Mouse
* Mouse #3: QEMU HID Mouse
(qemu) mouse_set 1
(qemu) info mice
Mouse #2: QEMU PS/2 Mouse
* Mouse #3: QEMU HID Mouse
Also replace monitor_printf() call in do_mouse_set() with error_report() and
adjust error message.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
irq_state is cleared before calling pci_device_deassert_intx, but the
latter misbehaves if the former isn't accurate. In this case, any raised
IRQs are not cleared, which hits an assertion in pcibus_reset:
qemu-system-x86_64: hw/pci/pci.c:250: pcibus_reset: Assertion
`bus->irq_count[i] == 0' failed.
pci_device_deassert_intx should clear irq_state anyways, so add
an assert.
This fixes migration with usb2 + usb-tablet.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: 7da1ad94ce027183b4049c2de370cb191b0073c1.1396290569.git.crobinso@redhat.com
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CPU address spaces touching load and store helpers as well as the
movement of (almost) all fields from CPU_COMMON to CPUState have led to
a noticeable increase of CPU() usage in "hot" paths for both TCG and KVM.
While CPU()'s OBJECT_CHECK() might help detect development errors, i.e.
in form of crashes due to QOM vs. non-QOM mismatches rather than QOM
type mismatches, it is not really needed at runtime since mostly used in
CPU-specific paths, coming from a target-specific CPU subtype. If that
pointer is damaged, other errors are highly likely to occur elsewhere
anyway.
Keep the CPU() macro for a consistent developer experience and for
flexibility to exchange its implementation, but turn it into a pure,
unchecked C cast for now.
Compare commit 6e42be7cd1.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Linux guests, when using more than 4GB of RAM, may end up using 1GB pages
to store (kernel) data. When this happens, we're unable to debug a running
Linux kernel with GDB:
(gdb) p node_data[0]->node_id
Cannot access memory at address 0xffff88013fffd3a0
(gdb)
GDB returns this error because x86_cpu_get_phys_page_debug() doesn't support
translating 1GB pages in IA-32e paging mode and returns an error to GDB.
This commit adds support for 1GB page translation for IA32e paging.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
acpi,pc,build bug fixes
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 28 Mar 2014 12:00:12 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi: fix ACPI generation for pci bridges
Don't enable a HPET timer if HPET is disabled
Detect pthread_setname_np at configure time
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 8dcf525abc
acpi-build: append description for non-hotplug
appended description for all occupied non hotpluggable PCI slots.
However the bridge devices are already added to SSDT,
adding them again will create an incorrect SSDT table.
Fixed by skipping the pci bridge devices, marking them as 'system'.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The arm ldrd/strd insns must cause alignment traps, whereas
at least for armv7 ldr/str must handle unaligned operations.
While this is hardly the only problem facing user-only emu,
this solves one problem for i386 on armv7 emulation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
PowerPC queue for 2.0
* OpenPIC fix
* MSR fixes for POWER7 upwards
* TCG instruction set support fix for POWER8
# gpg: Signature made Thu 27 Mar 2014 16:12:12 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/ppc-for-2.0:
target-ppc: MSR_POW not supported on POWER7/7+/8
target-ppc: POWER7+ supports the MSR_VSX bit
target-ppc: POWER8 supports isel
target-ppc: POWER8 supports the MSR_LE bit
intc/openpic_kvm: Fix MemListener delete region callback function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
trivial patches for 2014-03-27
# gpg: Signature made Thu 27 Mar 2014 15:23:53 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838
* remotes/mjt/tags/trivial-patches-2014-03-27: (23 commits)
linux-user: remove duplicate statement
hw/timer/grlib_gptimer: remove unnecessary assignment
hw/pci-host/apb.c: Avoid shifting left into sign bit
hw/intc/xilinx_intc: Avoid shifting left into sign bit
hw/intc/slavio_intctl: Avoid shifting left into sign bit
tests/libqos/pci-pc: Avoid shifting left into sign bit
hw/ppc: Avoid shifting left into sign bit
hw/intc/openpic: Avoid shifting left into sign bit
hw/usb/hcd-ohci.c: Avoid shifting left into sign bit
target-mips: Avoid shifting left into sign bit
hw/i386/acpi_build.c: Avoid shifting left into sign bit
hw/pci/pci_host.c: Avoid shifting left into sign bit
hw/intc/apic.c: Use uint32_t for mask word in foreach_apic
target-i386: Avoid shifting left into sign bit
CODING_STYLE: Section about mixed declarations
doc: update default PowerPC framebuffer settings
doc: update sun4m documentation
fix return check for KVM_GET_DIRTY_LOG ioctl
target-i386: Add missing 'static' and 'const' attributes
util: Add 'static' attribute to function implementation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A HPET timer can be started when HPET is not yet
enabled. This will not generate an interrupt
to the guest, but causes problems when HPET is later
enabled.
A timer that is created and expires at least once before
HPET is enabled will have an initialized comparator based
on a hpet_offset of 0 (uninitialized). When HPET is
enabled, hpet_set_timer() is called a second time, which
modifies the timer expiry to a time based on the
difference between current ticks (measured with the
newly initialized hpet_offset) and the timer's
comparator (which was generated before hpet_offset was
initialized). This results in a long period of no HPET
timer ticks.
When this occurs with a CentOS 5.x guest, the guest
may not receive timer interrupts during its narrow
timer check window and panic on boot.
Signed-off-by: Matt Lupfer <mlupfer@ddn.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Warn if no way of setting thread name is available.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
target-arm queue:
* Don't default to integratorcp board if no machine specified
# gpg: Signature made Thu 27 Mar 2014 14:09:12 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140327:
vl.c: Improve message when no default machine is found
hw/arm: Stop specifying integratorcp as the default board
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Avoid undefined behaviour shifting left into the sign bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add U suffix when doing "1 << 31" to avoid undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add U suffix to various places where we were doing "1 << 31",
which is undefined behaviour, and also to other constant
definitions in the same groups, for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add U suffix to avoid undefined behaviour. This is only strictly
necessary for the 1 << 31 cases; for consistency we extend it
to other constants in the same group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add U suffix to avoid undefined behaviour. This is only
strictly necessary for the 1<<31 cases, but we add it for the
other constants in these groups for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add U suffix to various places where we shift a 1 left by 31,
to avoid undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use unsigned arithmetic for operations on the mask word
in the foreach_apic() macro, to avoid relying on undefined
behaviour when shifting into the sign bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add 'U' suffixes where necessary to avoid (1 << 31) which
shifts left into the sign bit, which is undefined behaviour.
Add the suffix also for other constants in the same groupings
even if they don't shift into bit 31, for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We had an unwritten rule about declarations having to be at beginning of
blocks. Make it a written rule.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A few minor tidy-ups, plus add reference to the new -vga tcx and cg3 options.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix return condition check from kvm_vm_ioctl(s, KVM_GET_DIRTY_LOG, &d) to
handle internal failures or no support for memory slot dirty bitmap.
Otherwise the ioctl succeeds and continues with migration.
Addresses BUG# 1294227
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The static code analyzer smatch complains because of a missing 'static'
attribute:
util/module.c:166:6: warning:
symbol 'module_load' was not declared. Should it be static?
'static' is used in the forward declaration, but not in the implementation.
Add it there, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove MSR_POW from the msr_mask for POWER7/7P/8.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Without MSR_VSX we die early during a Linux boot.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Cédric Le Goater <clg@fr.ibm.com>
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
migration: traces
Adds trace messages to migration path. Patches have been on list for a
while, and have been reviewed by Juan.
# gpg: Signature made Thu 27 Mar 2014 10:44:21 GMT using RSA key ID 854083B6
# gpg: Can't check signature: public key not found
* remotes/amit-migration/tags/for_upstream:
migration: add more traces
util: add qemu_ether_ntoa
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Improve the clarity of the message QEMU prints when the user
doesn't specify a machine model to use and there is no default.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Currently for both qemu-system-arm and qemu-system-aarch64
the default board model if the user doesn't specify one
is the 'integratorcp'. This is a totally arbitrary historical
accident since it was the first board to be modelled.
That board is now just one target among many for us, and
is a very poor choice of default:
* it's an ancient board that is now only found in the
junkpiles of longtime ARM/Linux hackers, if at all
* it's an ARMv5 CPU, when most distros are now assuming
ARMv7
* it's pretty much unmaintained in QEMU
* it doesn't even have versatilepb's advantage of
supporting PCI
Making it or any other board the default serves only
to confuse people new to ARM who expect something more
like the x86 monoculture. Remove the is_default marker
from integratorcp, and don't set it for any other board,
to give users a nudge that they need to think about
which board they want a QEMU model of. (QEMU will produce
the admittedly slightly cryptic error "No machine found.")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This replaces DPRINTF macro with tracepoints.
This moves some messages from migration.c to savevm.c.
This adds tracepoint to signal about fileds failed to migrate.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The signed integer division -0x8000_0000_0000_0000 / -1 must be handled
separately to avoid an overflow on the QEMU host.
Negative overflow must be a negative number for correct sign
extension in Sparc64 mode. Use <stdint.h> constants.
Signed-off-by: Olivier Danet <odanet@caramail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
acpi,virtio bug fixes
Two bugfixes for virtio-net, and one for a recent
regression in acpi.
Both issues have been reported in the wild, so
I think it's preferable to merge these ASAP so
that reporters can make sure RC fixes their issue.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 26 Mar 2014 10:52:16 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
virtio-net: add vlan receive state to RxFilterInfo
virtio-net: Do not filter VLANs without F_CTRL_VLAN
Revert "acpi-test: rebuild SSDT"
acpi: make SSDT 1.0 spec compliant when possible
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit a07c67dfcc (Implement AT_CLKTCK.) back in March 2008 added a
new auxvec entry but didn't increment DLINFO_ITEMS, so it's been out of
sync ever since.
Bump it up to 14 so that it matches the number of NEW_AUX_ENT's that
need to be counted in create_elf_tables().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Paul Brook <paul@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Stefan Fritsch just fixed a virtio-net driver bug [1], virtio-net won't
filter out VLAN-tagged packets if VIRTIO_NET_F_CTRL_VLAN isn't negotiated.
This patch added a new field to @RxFilterInfo to indicate vlan receive
state ('normal', 'none', 'all'). If VIRTIO_NET_F_CTRL_VLAN isn't
negotiated, vlan receive state will be 'all', then all VLAN-tagged packets
will be received by guest.
This patch also fixed a boundary issue in visiting vlan table.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2014-02/msg02604.html
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If VIRTIO_NET_F_CTRL_VLAN is not negotiated, do not filter out all
VLAN-tagged packets but send them to the guest.
This fixes VLANs with OpenBSD guests (and probably NetBSD, too, because
the OpenBSD driver started as a port from NetBSD).
Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit d07e0e9cdd.
Since
commit b4f4d54812
acpi: make SSDT 1.0 spec compliant when possible
We are back to old encoding.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI specification says:
The ASL compiler can emit two different AML opcodes for a Package
declaration, either PackageOp or VarPackageOp. For small, fixed-length
packages, the PackageOp is used and this opcode is compatible with ACPI
1.0. A VarPackageOp will be emitted if any of the following conditions
are true:
. The NumElements argument is a TermArg that can only be resolved at
runtime.
. At compile time, NumElements resolves to a constant that is larger than
255.
. The PackageList contains more than 255 initializer elements.
Note: The ability to create variable-sized packages was first introduced
in ACPI 2.0. ACPI 1.0 only allowed fixed-size packages with up to 255 elements.
So the spec seems to say a fixed value up to 255 must always
be used with PackageOp and not VarPackageOp, and some guests
(windows up to win2k8) seem to interpret it like this.
Let's do just this, choosing the encoding depending on
the number of elements.
Fixes 9bcc80cd71
(i386/acpi-build: allow more than 255 elements in CPON).
https://bugs.launchpad.net/bugs/1297651
Reported-by: Robert Hu <robert.hu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GTK without VTE is needed for hosts which don't support VTE (for example
all variants of MinGW), but it can also be reasonable for other hosts.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Previous implementation presumed that FPU registers are 64-bit and are
working in 64-bit mode. This change first checks MIPS_HFLAG_F64 and if not
set, it does load/store from the odd numbered register pair.
Patch by Matthew Fortune.
Signed-off-by: Matthew Fortune <matthew.fortune@imgtec.com>
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
A couple trivial fixes for QEMU 2.0:
- Coding correction that allowed attempts to read the device
ROM after we'd already marked it failed (Bandan)
- Cosmetic error reporting fixes to remove unnecessary new lines
and fix a cut-n-paste wording error (Alex)
# gpg: Signature made Tue 25 Mar 2014 18:18:57 GMT using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found
* remotes/awilliam/tags/vfio-pci-for-qemu-20140325.0:
vfio: Cosmetic error reporting fixes
vfio: Correction in vfio_rom_read when attempting rom loading
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Remove terminating newlines from hw_error() and error_report() calls
* Fix cut-n-paste error in text (s/to/from/)
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Net patches
# gpg: Signature made Tue 25 Mar 2014 15:02:48 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/net-pull-request:
net: netmap_poll must update both read/write poll state
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block pull request
# gpg: Signature made Tue 25 Mar 2014 14:34:45 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
mirror: fix early wake from sleep due to aio
mirror: fix throttling delay calculation
Fixed various typos
qemu-img: mandate argument to 'qemu-img check --repair'
osdep: initialize glib threads in all QEMU tools
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit e638073c56 added a flag to track whether
a previous rom read had failed. Accidentally, the code
ended up adding vfio_load_option_rom twice. (Thanks to Alex
for spotting it)
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The mirror blockjob coroutine rate-limits itself by sleeping. The
coroutine also performs I/O asynchronously so it's important that the
aio callback doesn't wake the coroutine early as that breaks
rate-limiting.
Reported-by: Joaquim Barrera <jbarrera@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The throttling delay calculation was using an inaccurate sector count to
calculate the time to sleep. This broke rate-limiting for the block
mirror job.
Move the delay calculation into mirror_iteration() where we know how
many sectors were transferred. This lets us calculate an accurate delay
time.
Reported-by: Joaquim Barrera <jbarrera@ac.upc.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img check --repair option accepts an argument. The argument to
--repair switch can either be 'all' or 'leak'. Fix the long option to
mandate argument with --repair switch.
The patch fixes following segmentation fault
Core was generated by `qemu-img check -f qcow2 --repair all t.qcow2'.
Program terminated with signal 11, Segmentation fault.
0 in img_check (argc=6, argv=0x7fffab9b8a10) at qemu-img.c:588
588 if (!strcmp(optarg, "leaks")) {
(gdb) bt
0 img_check (argc=6, argv=0x7fffab9b8a10) at qemu-img.c:588
1 __libc_start_main () from /lib/x86_64-linux-gnu/libc.so.6
2 _start ()
(gdb)
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
glib versions prior to 2.31.0 require an explicit g_thread_init() call
to enable multi-threading.
Failure to initialize threading causes glib to take single-threaded code
paths without synchronization. For example, the g_slice allocator will
crash due to race conditions.
Fix this for all QEMU tool programs (qemu-nbd, qemu-io, qemu-img) by
moving the g_thread_init() call from vl.c:main() into a new
osdep.c:thread_init() constructor function.
thread_init() has __attribute__((constructor)) and is automatically
invoked by the runtime during startup.
We can now drop the "simple" trace backend's g_thread_init() call since
thread_init() already called it.
Note that we must keep coroutine-gthread.c's g_thread_init() call which
is located in a constructor function. There is no guarantee for
constructor function ordering so thread_init() may only be called later.
Reported-by: Mario de Chenno <mario.dechenno@unina2.it>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
target-arm queue for 2.0:
* Fix wrong-results bug in A64 Neon MLS instruction
* Fix loading of ELF images for 32 bit boards in qemu-system-aarch64
# gpg: Signature made Mon 24 Mar 2014 17:14:07 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140324:
target-arm: Load ELF images with the correct machine type for CPU
target-arm: Fix A64 Neon MLS
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
acpi,pc,test bug fixes
More small fixes all over the place.
Notably fixes for big-endian hosts by Marcel.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 24 Mar 2014 10:41:07 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
tests/acpi-test: do not fail if iasl is broken
vl.c: Use MAX_CPUMASK_BITS macro instead of hardcoded constant
sysemu.h: Document what MAX_CPUMASK_BITS really limits
acpi: fix endian-ness for table ids
acpi-test: signature endian-ness fixes
i386/acpi-build: support hotplug of VCPU with APIC ID 0xFF
acpi-test: rebuild SSDT
i386/acpi-build: allow more than 255 elements in CPON
pc: Refuse max_cpus if it results in too large APIC ID
acpi: Don't use MAX_CPUMASK_BITS for APIC ID bitmap
acpi: Assert sts array limit on AcpiCpuHotplug_add()
pc: Refuse CPU hotplug if the resulting APIC ID is too large
acpi: Add ACPI_CPU_HOTPLUG_ID_LIMIT macro
acpi-test: update expected SSDT files
acpi-build: fix misaligned access
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When trying to load an ELF file specified via -kernel, we need to
pass load_elf() the ELF machine type corresponding to the CPU we're
booting with, not the one corresponding to the softmmu binary
we happen to be running. (The two are different in the case of
loading a 32-bit ARM ELF file into a 32 bit CPU being emulated
by qemu-system aarch64.) This was causing us to incorrectly fail
to load ELF images in this situation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1395427476-25546-1-git-send-email-peter.maydell@linaro.org
The order of operands for the accumulate step in disas_simd_3same_int()
was reversed. This only affected the MLS instruction, since all the
other accumulating instructions in this category perform an addition
rather than a subtraction.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is an issue with iasl on big endian machines: It
cannot disassemble acpi tables taken from little endian
machines, so we cannot check the expected tables.
The acpi test will check if the expected aml files
can be disassembled, and will issue an warning not
failing the test on those machines until this
problem is solved by the acpica community.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current tablet + spice is unusable. Regressed with the UI input rework.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
PowerPC queue for 2.0
* sPAPR loop fix
* SPR reset fix
* Reduce allocation size of indirect opcode tables
* Restrict number of CPU threads
* sPAPR H_SET_MODE fixes
* sPAPR firmware path fixes
* Static and constness cleanups
# gpg: Signature made Thu 20 Mar 2014 01:46:14 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/ppc-for-2.0:
spapr: Implement interface to fix device pathname
spapr: QOM'ify pseries machine
spapr_vio: Fix firmware names
spapr_llan: Add to boot device list
qdev: Introduce FWPathProvider interface
vl.c: Extend get_boot_devices_list() to ignore suffixes
spapr_hcall: Fix little-endian resource handling in H_SET_MODE
target-ppc: Introduce powerisa-207-server flag
target-ppc: Force CPU threads count to be a power of 2
target-ppc: Fix overallocation of opcode tables
target-ppc: Reset SPRs on CPU reset
spapr_hcall: Fix h_enter to loop correctly
target-ppc: Add missing 'static' and 'const' attributes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extends the pseries machine type with the interface to fix firmware
pathnames for devices which have @bootindex property.
This fixes SCSI disks' device node names (which are wildcard nodes in
the device-tree), for spapr-vscsi, virtio-scsi and usb-storage.
This fixes PHB name from "pci" to "pci@XXXX" where XXXX is a BUID as
there is no bus on top of sPAPRPHBState where PHB firmware name could
be fixed using the BusClass::get_fw_dev_path() mechanism.
This stores the boot list in the /chosen/qemu,boot-list property of
the device tree. "\n" are replaced by spaces to support OF1275.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This changes VIO bridge fw name from spapr-vio-bridge to vdevice and
vscsi/veth node names from QEMU object names to VIO specific device tree
names.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
QEMU supports firmware names for all devices in the QEMU tree but
some architectures expect some parts of firmware path names in different
format.
This introduces a firmware-pathname-change interface definition.
If some machines needs to redefine the firmware path format, it has
to add the TYPE_FW_PATH_PROVIDER interface to an object that is above
the device on the QOM tree (typically /machine).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
As suffixes do not make sense for sPAPR's device tree and
there is no way to filter them out on the BusState::get_fw_dev_path()
level, let's add an ability for the external caller to specify
whether to apply suffixes or not.
We could handle suffixes in SLOF (ignored for now) but this would require
serious rework in the node opening code in SLOF, which has no obvious
benefit for the currently emulated sPAPR machine.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This changes resource code definitions to ones used in the host kernel.
This fixes H_SET_MODE_RESOURCE_LE (switch between big endian and
little endian) to sync registers from KVM before changing LPCR value.
This adds a set_spr() helper to update an SPR in a CPU's context to avoid
possible races and makes use of it to change LPCR.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This flag will be used to decide whether to emulate some bits of
H_SET_MODE hypercall because some are POWER8-only.
While we are here, add 2.05 flag to POWER8 family too. POWER7/7+ already
have it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
PowerPC kernel expects the number of SMT threads in a core to be a power
of 2. Since QEMU doesn't enforce this, it leads to an early guest kernel
crash if invalid threads count is specified.
Prevent this crash and make it a graceful exit from QEMU itself by
validating the user-supplied threads count.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
create_new_table() should allocate 0x20 opc_handler_t pointers, but
actually allocates 0x20 opc_handler_t structs. Fix this.
Signed-off-by: Stuart Brady <sdb@zubnet.me.uk>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This resets SPR values to defaults on CPU reset. This should help
with little-endian guests reboot issues.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We wanted to loop till index is 8. On 8 we return with H_PTEG_FULL. If we
are successful in loading hpte with any other index, we continue with that
index value.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
PReP machine and devices
* Raven PCI host bridge memory fixes (remainder)
# gpg: Signature made Wed 19 Mar 2014 23:35:08 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/prep-for-2.0:
raven: Use raven_ for all function prefixes
raven: Fix PCI bus accesses with size > 1
raven: Add PCI bus mastering address space
raven: Set a correct PCI memory region
raven: Set a correct PCI I/O memory region
raven: Implement non-contiguous I/O region
raven: Rename intack region to pci_intack
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This has been tested on Linux 2.4/PPC with the lsi53c895a SCSI adapter.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
PCI memory region is 0x3f000000 bytes starting at 0xc0000000.
However, keep compatibility with Open Hack'Ware expectations
by adding a hack for Open Hack'Ware display.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
PCI I/O region is 0x3f800000 bytes starting at 0x80000000.
Do not use global QEMU I/O region, which is only 64KB.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Regions added subsequently will also have the pci_ prefix.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
QOM CPUState refactorings / X86CPU
* CPUState layout optimization for TCG
# gpg: Signature made Wed 19 Mar 2014 21:51:46 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-cpu-for-2.0:
cpu: Move tcg_exit_req to the end of CPUState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOM child properties take a reference to the object and release it when
the property is deleted. Therefore we should unref the default_backend
after we have added it as a child property.
Cc: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There are currently three types of object_property_add_link() callers:
1. The link property may be set at any time.
2. The link property of a DeviceState instance may only be set before
realize.
3. The link property may never be set, it is read-only.
Something similar can already be achieved with
object_property_add_str()'s set() argument. Follow its example and add
a check() argument to object_property_add_link().
Also provide default check() functions for case #1 and #2. Case #3 is
covered by passing a NULL function pointer.
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Tweaked documentation comment]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some object_property_add_link() callers expect property deletion to
unref the link property object. Other callers expect to manage the
refcount themselves. The former are currently broken and therefore leak
the link property object.
This patch adds a flags argument to object_property_add_link() so the
caller can specify which refcount behavior they require. The new
OBJ_PROP_LINK_UNREF_ON_RELEASE flag causes the link pointer to be
unreferenced when the property is deleted.
This fixes refcount leaks in qdev.c, xilinx_axidma.c, xilinx_axienet.c,
s390-virtio-bus.c, virtio-pci.c, virtio-rng.c, and ui/console.c.
Rationale for refcount behavior:
* hw/core/qdev.c
- bus children are explicitly unreferenced, don't interfere
- parent_bus is essentially a read-only property that doesn't hold a
refcount, don't unref
- hotplug_handler is leaked, do unref
* hw/dma/xilinx_axidma.c
- rx stream "dma" links are set using set_link, therefore they
need unref
- tx streams are set using set_link, therefore they need unref
* hw/net/xilinx_axienet.c
- same reasoning as hw/dma/xilinx_axidma.c
* hw/pcmcia/pxa2xx.c
- pxa2xx bypasses set_link and therefore does not use refcounts
* hw/s390x/s390-virtio-bus.c
* hw/virtio/virtio-pci.c
* hw/virtio/virtio-rng.c
* ui/console.c
- set_link is used and there is no explicit unref, do unref
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The error behavior of object_property_set_link() is dangerous. It sets
the link property object to NULL if an error occurs. A setter function
should either succeed or fail, it shouldn't leave the value NULL on
failure.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The path resolution logic in object_property_set_link() should be a
separate function. This makes the code easier to read and maintain.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Machine rewriting added MACHINE() macro which is
already in use by other OpenBSD library.
Since qemu/sockets.h exposes the OpenBSD namespace,
the minimalistic approach is to add it as the first QEMU include.
Reported-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since commit 261747f176 (vl: Use MachineClass instead of global
QEMUMachine list) valgrind complains about the following:
==54082== 57 bytes in 3 blocks are definitely lost in loss record 365 of
729
==54082== at 0x4031AFE: malloc (vg_replace_malloc.c:292)
==54082== by 0x4145569: g_malloc (in
/usr/lib64/libglib-2.0.so.0.3400.2)
==54082== by 0x415F9E9: g_strconcat (in
/usr/lib64/libglib-2.0.so.0.3400.2)
==54082== by 0x80157FE7: qemu_register_machine (vl.c:1597)
==54082== by 0x80208E6B: module_call_init (module.c:105)
==54082== by 0x80013B91: main (vl.c:3000)
Turns out that valgrind is right. We simply forget the memory that
g_strconcat() has allocated. Lets free it after the type_register().
We need a 2nd variable due to constness of the name part of the
type structure.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 259186a7d2 (cpu: Move halted and
interrupt_request fields to CPUState) passed CPUState::env_ptr to
tlb_flush() directory rather than through a typed variable.
Commit 00c8cb0a36 (cputlb: Change
tlb_flush() argument to CPUState) now changed the argument type.
This was unnoticed by gcc because env_ptr is a void pointer.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* remotes/riku/linux-user-for-upstream:
linux-user: Implement capget, capset
linux-user: Don't allow guest to block SIGSEGV
signal: added a wrapper for sigprocmask function
linux-user: Don't reserve space for commpage for AArch64
linux-user: implement F_[GS]ETOWN_EX
linux-user: Don't return uninitialized value for atomic_barrier syscall
linux-user/signal.c: Correct error path for AArch64 do_rt_sigreturn
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block patches for 2.0.0-rc1
# gpg: Signature made Wed 19 Mar 2014 13:03:27 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
dataplane: fix implicit IOThread refcount
block/nfs: report errors from libnfs
block/nfs: bump libnfs requirement to 1.9.3
qcow2: Fix fail path in realloc_refcount_block()
qcow2: Correct comment for realloc_refcount_block()
qemu-io: Extended "--cmd" description in usage text
qemu-io-cmds: Fixed typo in example for writev.
block: Add error handling to bdrv_invalidate_cache()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target-arm queue:
* last few A64 Neon instructions
* fix some PL011 UART bugs causing occasional serial lockups
* fix the non-PCI AHCI device
# gpg: Signature made Wed 19 Mar 2014 12:00:59 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140319:
target-arm: A64: Add saturating accumulate ops (USQADD/SUQADD)
target-arm: A64: Add saturating int ops (SQNEG/SQABS)
pl011: fix incorrect logic to set the RXFF flag
pl011: fix UARTRSR accesses corrupting the UARTCR value
pl011: reset the fifo when enabled or disabled
ahci: fix sysbus support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When creating an IOThread implicitly (the user did not specify
x-iothread=<id>) remember that iothread_find() does not return the
object with an incremented refcount.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
if an NFS operation fails we should report what libnfs knows
about the failure. It is likely more than just an error code.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
libnfs prior to 1.9.3 contains a bug that will report
wrong transfer sizes if the file offset grows beyond 4GB
and RPC responses are received out of order. this
error is not detectable and fixable in qemu.
additionally 1.9.3 introduces support for handling short
read/writes in general and takes care of the necessary
retransmissions internally.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If qcow2_alloc_clusters() fails, new_offset and ret will both be
negative after the fail label, thus passing the first if condition and
subsequently resulting in a call of qcow2_free_clusters() with an
invalid (negative) offset parameter. Fix this by introducing a new label
"fail_free_cluster" which is only invoked if new_offset is indeed
pointing to a newly allocated cluster that should be cleaned up by
freeing it.
While we're at it, clean up the whole fail path. qcow2_cache_put()
should (and actually can) never fail, hence the return value can safely
be ignored (aside from asserting that it indeed did not fail).
Furthermore, there is no reason to give QCOW2_DISCARD_ALWAYS to
qcow2_free_clusters(), a mere QCOW2_DISCARD_OTHER will suffice.
Ultimately, rename the "fail" label to "done", as it is invoked both on
failure and success.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Contrary to the comment describing this function's behavior, it does not
return 0 on success, but rather the offset of the newly allocated
cluster. This patch adjusts the comment accordingly to reflect the
actual behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's not clear from the usage description that "--cmd" option accepts
its argument as a string, so any special symbols have to be quoted from
the shell.
Updates in usage text:
- Specified parameter format for "--cmd" option.
- Added an instruction how to get help for "--cmd" option.
Signed-off-by: Maria Kustova <maria.k@catit.be>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If it returns an error, the migrated VM will not be started, but qemu
exits with an error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Add the saturating accumulate operations USQADD and SUQADD
to the A64 instruction set. This completes coverage of A64 Neon.
These operations (which are unsigned + signed -> signed and
signed + unsigned -> unsigned) don't exist in the A32/T32
instruction set, so require a complete new set of helper functions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This mostly re-uses the existing NEON helpers with an additional two for
the 64 bit case. I also took the opportunity to add TCG_CALL_NO_RWG
options to the helpers as they don't modify globals (saturation flags
are in the CPU Environment).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Offset 4 is UARTRSR/UARTECR, not the UARTCR. The UARTCR would be
corrupted if the UARTRSR is ever written. Fix by implementing a correct
model of the UARTRSR/UARTECR register. Reads of this register simply
reflect the error bits in data register. Only breaks can be triggered in
QEMU. With the pl011_can_receive function, we effectively have flow
control between the host and the model. Framing and parity errors simply
don't make sense in the model and will never occur.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1395166721-15716-3-git-send-email-robherring2@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Intermittent issues have been seen where no serial input occurs. It
appears the pl011 gets in a state where the rx interrupt never fires
because the rx interrupt only asserts when crossing the fifo trigger
level. The fifo state appears to get out of sync when the pl011 is
re-configured. This combined with the rx timeout interrupt not being
modeled results in no more rx interrupts.
Disabling the fifo is the recommended way to clear the tx fifo in the
TRM (section 3.3.8). The behavior in this case for the rx fifo is
undefined in the TRM, but having fifo contents to be maintained during
configuration changes is not likely expected behavior. Reseting the
fifo state when the fifo size is changed is the simplest solution.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1395166721-15716-2-git-send-email-robherring2@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Non-PCI AHCI support is broken due to assertion failures when trying
to convert AHCIState to a PCIDevice pointer as AHCIState can have
different container structs. Fix this by using the non-asserting object
cast and checking the returned pointer is not NULL.
The AddressSpace pointer is also being initialized to NULL and causing
dma_memory_map call to fail. Fix this by initializing to
address_space_memory for sysbus instances.
Also correct AHCI_VMSTATE to use the correct container SysbusAHCIState
for sysbus instances.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Message-id: 1392073373-3295-1-git-send-email-robherring2@gmail.com
[PMM: added linebreaks to fix overlong lines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
when using signature for table ID, we forgot to byte-swap it.
signatures are really ASCII strings, let's treat them as such.
While at it, get rid of most of _SIGNATURE macros.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Building on the previous patch, raise the maximal count of processor
objects / NTFY branches / CPON elements from 255 to 256. This allows the
VCPU with APIC ID 0xFF to be hotplugged.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit 9bcc80cd71
i386/acpi-build: allow more than 255 elements in CPON
Replaces 0x1 with a smaller One constant.
rebuild expected SSDT.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The build_ssdt() function builds a number of AML objects that are related
to CPU hotplug, and whose IDs form a contiguous sequence of APIC IDs.
(APIC IDs are in fact discontiguous, but this is the traditional
interface: build a contiguous sequence from zero up that covers all
possible APIC IDs.) These objects are:
- a Processor() object for each VCPU,
- a NTFY method, with one branch for each VCPU,
- a CPON package with one element (hotplug status byte) for each VCPU.
The build_ssdt() function currently limits the *count* of processor
objects, and NTFY branches, and CPON elements, in 0xFF (see the assignment
to "acpi_cpus"). This allows for an inclusive APIC ID range of [0..254].
This is incorrect, because the highest APIC ID that we otherwise allow a
VCPU to take is 255.
In order to extend the maximum count to 256, and the traversed APIC ID
range correspondingly to [0..255]:
- the Processor() objects need no change,
- the NTFY method also needs no change,
- the CPON package must be updated, because it is defined with a
DefPackage, and the number of elements in such a package can be at most
255. We pick a DefVarPackage instead.
We replace the Op byte, and the encoding of the number of elements.
Compare:
DefPackage := PackageOp PkgLength NumElements PackageElementList
DefVarPackage := VarPackageOp PkgLength VarNumElements PackageElementList
PackageOp := 0x12
VarPackageOp := 0x13
NumElements := ByteData
VarNumElements := TermArg => Integer
The build_append_int() function implements precisely the following TermArg
encodings (a subset of what the ACPI spec describes):
TermArg := DataObject
DataObject := ComputationalData
ComputationalData := ConstObj | ByteConst | WordConst | DWordConst
directly encoded in the function, with build_append_byte():
ConstObj := ZeroOp | OneOp
ZeroOp := 0x00
OneOp := 0x01
call to build_append_value(..., 1):
ByteConst := BytePrefix ByteData
BytePrefix := 0x0A
ByteData := 0x00 - 0xFF
call to build_append_value(..., 2):
WordConst := WordPrefix WordData
WordPrefix := 0x0B
WordData := ByteData[0:7] ByteData[8:15]
call to build_append_value(..., 4):
DWordConst := DWordPrefix DWordData
DWordPrefix := 0x0C
DWordData := WordData[0:15] WordData[16:31]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This changes the PC initialization code to reject max_cpus if it results
in an APIC ID that's too large, instead of aborting or erroring out when
it is already too late.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MAX_CPUMASK_BITS is a limit for max_cpus and CPU indexes, not for APIC
IDs.
ACPI_CPU_HOTPLUG_ID_LIMIT is the right macro for the limit on APIC IDs
on the ACPI and CPU hotplug code.
There are no functional changes introduced by this patch, as
MAX_CPUMASK_BITS + 1 == 255 + 1 == 256 == ACPI_CPU_HOTPLUG_ID_LIMIT.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
AcpiCpuHotplug_add() can't handle vCPU arch IDs larger than
ACPI_CPU_HOTPLUG_ID_LIMIT. Instead of corrupting memory in case the vCPU
ID is too large, use g_assert() to ensure we are not over the limit.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI CPU hotplug code requires APIC IDs to be smaller than
ACPI_CPU_HOTPLUG_ID_LIMIT, so enforce the limit before trying to hotplug
a new vCPU, returning an error instead of crashing.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The new macro will be helpful to allow us to detect too large SMP limits
before it is too late.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
this fixes invalid rectangle updates observed after commit 12b316d
with the vmware VGA driver. The issues occured because the server
and client surface update seems to be out of sync at some points
and the max width of the surface is not dividable by
VNC_DIRTY_BITS_PER_PIXEL (16).
Reported-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
4 small patches:
- Fixing findings of valgrind regarding minor memory leaks:
Currently we forget the pointer of qemu_allocate_irqs. Since we never
free the irqs, this is not critical, but obviously not good programming
style. While we are at it, we dont need the irq infrastructure for
the sclp consoles.
- Handle new ELF error codes for BIOS loading
# gpg: Signature made Mon 17 Mar 2014 21:34:12 GMT using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found
* remotes/borntraeger/tags/kvm-s390-20140317:
s390x/sclpconsole-lm: Fix and simplify irq setup
s390x/sclpconsole: Fix and simplify interrupt injection
s390x/cpu hotplug: Fix memory leak
s390/ipl: Fix error path on BIOS loading
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
valgrind complains about a memory leak in irq setup of sclpconsole:
==42117== 8 bytes in 1 blocks are definitely lost in loss record 89of 833
==42117== at 0x4031AFE: malloc (vg_replace_malloc.c:292)
==42117== by 0x8022F855: malloc_and_trace (vl.c:2715)
==42117== by 0x4145569: g_malloc (in /usr/lib64/libglib-2.0.so.0.3400.2)
==42117== by 0x800F696D: qemu_extend_irqs (irq.c:51)
==42117== by 0x800F6AF7: qemu_allocate_irqs (irq.c:68)
==42117== by 0x800F5685: console_init (sclpconsole.c:235)
==42117== by 0x80297C79: event_realize (event-facility.c:386)
==42117== by 0x80105071: device_set_realized (qdev.c:693)
==42117== by 0x801CDC4B: property_set_bool (object.c:1337)
==42117== by 0x801CBD7F: object_property_set (object.c:819)
[...]
We dont need the indirection of an qemu irq to inject an slcp interrupt.
Fixes a valgrind error and makes the code simpler.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
valgrind complains about a memory leak in irq setup of sclpconsole:
==42117== 8 bytes in 1 blocks are definitely lost in loss record 89 of 833
==42117== at 0x4031AFE: malloc (vg_replace_malloc.c:292)
==42117== by 0x8022F855: malloc_and_trace (vl.c:2715)
==42117== by 0x4145569: g_malloc (in /usr/lib64/libglib-2.0.so.0.3400.2)
==42117== by 0x800F696D: qemu_extend_irqs (irq.c:51)
==42117== by 0x800F6AF7: qemu_allocate_irqs (irq.c:68)
==42117== by 0x800F5685: console_init (sclpconsole.c:235)
==42117== by 0x80297C79: event_realize (event-facility.c:386)
==42117== by 0x80105071: device_set_realized (qdev.c:693)
==42117== by 0x801CDC4B: property_set_bool (object.c:1337)
==42117== by 0x801CBD7F: object_property_set (object.c:819)
[...]
Turns out that we actually dont need the indirection, so trigger the
sclp interrupt directly.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
valgrind complains about the following:
==42117== 8 bytes in 1 blocks are definitely lost in loss record 88 of 833
==42117== at 0x4031AFE: malloc (vg_replace_malloc.c:292)
==42117== by 0x8022F855: malloc_and_trace (vl.c:2715)
==42117== by 0x4145569: g_malloc (in /usr/lib64/libglib-2.0.so.0.3400.2)
==42117== by 0x800F696D: qemu_extend_irqs (irq.c:51)
==42117== by 0x800F6AF7: qemu_allocate_irqs (irq.c:68)
==42117== by 0x8029FA4B: irq_cpu_hotplug_init (sclpcpu.c:84)
==42117== by 0x80297C79: event_realize (event-facility.c:386)
==42117== by 0x80105071: device_set_realized (qdev.c:693)
[...]
Right it is. Don't drop the pointer of the irq.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@us.ibm.com>
commit 18674b2678
(elf-loader: add more return codes) enabled the elf loader to return
other errors than -1.
Lets also handle that case for our "BIOS" on s390.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Alexey Kardashevskiy <aik@ozlabs.ru>
CC: Alexander Graf <agraf@suse.de>
All of the helpers with the explicit big/little endian option
require the return address as a parameter. Acquire this via
a trampoline.
Move the load of areg0 into the trampoline.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Pass address registers explicitly, rather than as indicies of args[].
It's two argument registers either way. Use more TCGReg as appropriate.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We were computing the full address into %o0 and then not using it.
Adjust some of the computation to rely less on having to pull immediate
values into registers.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This adds support for [UF]RSQRTE instructions. It utilises the existing
NEON helpers with some changes. The changes include an explicit passing
of fpstatus (so the correct one is used between arm32 and aarch64),
denormilzation, more correct error handling and also proper scaling of
the fraction going into the estimate.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-25-git-send-email-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the FCVTXN operation, which does a narrowing fp precision
conversion using the "round to odd" (von Neumann) mode. This can
conveniently be implemented as "do operation using round to zero;
then set the LSB of the mantissa to 1 if the Inexact flag was set".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-24-git-send-email-peter.maydell@linaro.org
Implement URECPE and FRECPE instructions in both scalar and vector forms.
The actual reciprocal estimate function is shared with the A32/T32 Neon
code. However in A64 we aren't using the Neon "standard FPSCR value"
so extra checks are necessary to handle non-squashed denormal inputs
which can never happen for A32/T32. Calling conventions for the helpers
are thus modified to pass the fpst directly; we mark the helpers as
TCG_CALL_NO_RWG since we're changing the declarations anyway.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-21-git-send-email-peter.maydell@linaro.org
This implements the remaining [US][Q][R]SHR[U][N][2] opcodes, which are
saturating and narrowing shift right operations. These are used in
things like libav. Note signed shifts can have an "unsigned" saturating
narrow operation which will floor negative values.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1394822294-14837-7-git-send-email-peter.maydell@linaro.org
[PMM: Added the scalar encodings, style tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the PMULL instruction; this is the last unimplemented insn
in the three-reg-diff group.
Note that PMULL with size 3 is considered part of the AES part
of the crypto extensions (see the ID_AA64ISAR0_EL1 register definition
in the v8 ARM ARM), so it isn't necessary to burn an extra feature
bit on it, even though we're using more feature bits than a single
"crypto extension present/not present" toggle.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-2-git-send-email-peter.maydell@linaro.org
If the CPU is a Cortex-A9 then we should set its reset-cbar property
so that the guest can read the correct PERIPHBASE/CBAR register value;
newer versions of the Linux kernel (as of commit bc41b8724 in 3.12)
will otherwise assume the CPU is a buggy single core A9 SoC. The
realview-pbx-a9 is the only one of the cluster of boards in realview.c
which works with the Cortex-A9 (ie which gets an a9mpcore_priv device);
make sure it also has reset-cbar set correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1394462692-8871-3-git-send-email-peter.maydell@linaro.org
Newer versions of the Linux kernel (as of commit bc41b8724 in 3.12)
now assume that if the CPU is a Cortex-A9 and the reset value of the
PERIPHBASE/CBAR register is zero then the CPU is a specific buggy
single core A9 SoC, and will not try to start other cores. Since we
now have a CPU property for the reset value of the CBAR, we can
just fix the vexpress board model to correctly set CBAR so SMP
works again. To avoid duplicate boilerplate code in both the A9
and A15 daughterboard init functions, we split out the CPU and
private memory region init to its own function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1394462692-8871-2-git-send-email-peter.maydell@linaro.org
gtk: warp bugfixes.
gtk: Allow to activate grab-on-hover from the command line
# gpg: Signature made Mon 17 Mar 2014 13:35:35 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-gtk-3:
gtk: Don't warp absolute pointer
gtk: Fix mouse warping with gtk3
gtk: Allow to activate grab-on-hover from the command line
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were using the wrong coordinates, this fixes things to match the
original gtk2 implementation.
You can see this error in action by using -vga qxl, however even after this
patch the mouse warps in small increments up and to the left, -7x and -3y
pixels at a time, until the pointer is warped off the widget. I think it's
a qxl bug, but the next patch covers it up.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As long as we have no persistent GTK configuration, this allows to
enable the useful grab-on-hover feature already when starting the VM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ kraxel: fix warning with CONFIG_GTK=n ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement the capget and capset syscalls. This is useful because
simple programs like 'ls' try to use it in AArch64, and otherwise
we emit a lot of noise about it being unimplemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Output error message using qemu's error_report() function when user
provides the invalid machine type on the command line. This also saves
time to find what issue is when you downgrade from one version of qemu
to another that doesn't support required machine type yet (the version
user downgraded to have to have this patch applied too, of course).
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
[Replace printf with error_printf, suggested by Markus Armbruster. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Two missing braces, one close and one open, fabulously let the code
compile.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two issues in qemu-nbd: a missing return value check after
calling accept(), and file descriptor leaks in nbd_client_thread.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a dangerous bug: "make clean" after "make distclean" will
delete every single file including those under .git, if you do in-tree
build!
Rationale: A first "make distclean" will unset $(DSOSUF), a following
"make distclean" or "make clean" will find all the files and delete it.
Fix it by explicitly typing the file extensions here, and combine
multiple find invocations into one.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1395020122-4957-1-git-send-email-famz@redhat.com
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't allow the linux-user guest to block SIGSEGV -- QEMU needs this
signal to detect accesses to pages which it has marked read-only
because it has cached translated code from them.
We implement this by making the do_sigprocmask() wrapper suppress
SIGSEGV when doing the host process signal mask manipulation; instead
we store the current state of SIGSEGV in the TaskState struct.
If we get a SIGSEGV for the guest when the guest has blocked the
signal, we treat it as if the default SEGV handler was in place,
as the kernel does for forced SIGSEGV delivery.
This patch is based on an idea by Alex Barcelo, but rather than
simply lying to the guest about the SIGSEGV state we track it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Create a wrapper for signal mask changes initiated by the guest;
(this includes syscalls and also the sigreturns from signal.c)
this will give us a place to put code which prevents the guest
from changing the handling of signals used by QEMU itself
internally.
The wrapper is called from all the guest-initiated sigprocmask, but
is not called from internal qemu sigprocmask calls.
Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
[PMM: Added calls to wrapper for sigprocmask uses in signal.c
when setting the signal mask on entry and exit from signal
handlers, since these also are guest-provided signal masks.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
AArch64 Linux, unlike AArch32, doesn't use a commpage. This means we
should not be reserving room in the guest address space for one.
Fixes LP:1287195.
Reported-by: Amanieu d'Antras <amanieu@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
F_GETOWN is replaced by F_GETOWN_EX inside the glibc fcntl wrapper
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU's implementation of the m68k atomic_barrier syscall, like the kernel's,
is just a no-op. However we still need to return a result code from it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The error path in AArch64 do_rt_sigreturn() which fails before
attempting lock_user_struct() was doing an unlock_user_struct()
on an uninitialized variable. Initialize frame to NULL so we
can use the same error-exit path in all cases (unlock of NULL
is permitted and does nothing).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
trivial patches for 2014-03-15
# gpg: Signature made Sat 15 Mar 2014 09:54:30 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838
* remotes/mjt/tags/trivial-patches-2014-03-15:
FSL eTSEC: Fix typo in rx ring
scripts/make-release: Don't distribute .git directories
configure: Don't use __int128_t for clang versions before 3.2
audio: Add 'static' attributes to several variables
tests: Fix 'make test' for i686 hosts (build regression)
misc: Fix typos in comments
Add qga/qapi-generated to .gitignore
hw/timer/grlib_gptimer: Avoid integer overflows
.travis.yml: add IRC notifications for build failures
.travis.yml: trivial whitespace fixup
.travis.yml: re-enable lttng user space trace test
.travis.yml: add a new build target with non-core devlibs
sasl: Avoid 'Could not find keytab file' in syslog
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/rth/tcg-aarch-6-2:
tcg-aarch64: Introduce tcg_out_insn_3405
tcg-aarch64: Support div, rem
tcg-aarch64: Support muluh, mulsh
tcg-aarch64: Support add2, sub2
tcg-aarch64: Support deposit
tcg-aarch64: Use tcg_out_insn for setcond
tcg-aarch64: Support movcond
tcg-aarch64: Support andc, orc, eqv, not, neg
tcg-aarch64: Handle constant operands to and, or, xor
tcg-aarch64: Handle constant operands to add, sub, and compare
tcg-aarch64: Implement mov with tcg_out_insn
tcg-aarch64: Introduce tcg_out_insn_3401
tcg-aarch64: Convert shift insns to tcg_out_insn
tcg-aarch64: Introduce tcg_out_insn
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
'make test' is broken at least since commit
baacf04799. Several source files were moved
to util/, and some of them there split, so add the missing prefix and new
files to fix the compiler and linker errors.
There remain more issues, but these changes allow running the test on a
Linux i686 host.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Codespell found and fixed these new typos:
* doesnt -> doesn't
* funtion -> function
* perfomance -> performance
* remaing -> remaining
A coding style issue (line too long) was fixed manually.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The folder "qga/qapi-generated" shows up after building QEMU, and
gets in the way during e.g. "git add ."; Add it to .gitignore to
keep it from accidentally ending up in the wrong place.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The GPTIMER uses 32-bit registers. Use a 64-bit operation to get the
ptimer count, otherwise we end up with a count of 0 for GPTIMER counter
values of 0xffffffff.
Use the GPTIMER counter value for tracing to avoid an overflow of the
32-bit value passed to trace_grlib_gptimer_enable().
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
I'm trying to avoid spamming the IRC channel (not overly likely as
builds take a while). So failure will always be reported but if the
build continues to work then the IRC notifications will be quiet.
Note any GitHub based repository with Travis enabled will use this
notification. If it proves to be too spammy we may want to ask users not
to use Travis themselves although this seems sub-optimal.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This build was disabled while the lttng tracing was broken. Stefan has
recently submitted a pull request with it re-enabled.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The current builds don't include all the features which are
auto-detected and then disabled when the appropriate test packages don't
exist. I've added another target that enables all known additional
packages for increased coverage. I didn't add it to the core package
list to reduce build time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The "keytab" specification in "qemu.sasl" only makes sense if "gssapi" is
selected in "mech_list". Even if the latter is not done (ie. "gssapi" is
not selected), the cyrus-sasl library tries to open the specified keytab
file, although nothing has a use for it outside the gssapi backend.
Since the default keytab file "/etc/qemu/krb5.tab" is usually absent, the
cyrus-sasl library emits a warning to syslog at startup, which tends to
annoy users (who didn't ask for gssapi in the first place).
Comment out the keytab specification per default.
"qemu-doc.texi" already correctly explains how to use "mech_list: gssapi"
together with "keytab:".
See also:
- upstream libvirt commit fe772f24,
- Red Hat Bugzilla <https://bugzilla.redhat.com/show_bug.cgi?id=1018434>.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
ACKed-By: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Block pull request
# gpg: Signature made Fri 14 Mar 2014 16:12:14 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
qemu-iotests: remove 085 and 087 from 'quick' group
qemu-iotests: add 083 NBD client disconnect tests
tests: add nbd-fault-injector.py utility
nbd: close socket if connection breaks
block: Explicitly specify 'unsigned long long' for VHDX 64-bit constants
blockdev: Refuse to open encrypted image unless paused
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/scsi-next:
virtio-scsi: actually honor sense_size from configuration space
scsi: Fix migration of scsi sense data
spapr-vscsi: fix CRQ status
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up multiply at the same time.
For remainder, generic code will produce mul+sub,
whereas we can implement with msub.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Handle a simplified set of logical immediates for the moment.
The way gcc and binutils do it, with 52k worth of tables, and
a binary search depth of log2(5334) = 13, seems slow for the
most common cases.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
The 'quick' group in qemu-iotests are not allowed to run QEMU since we
don't know which targets are available. In other words, they may only
use qemu-img, qemu-io, and qemu-nbd.
Drop 085 and 087 from the 'quick' group since they run QEMU. This
makes "make check-block" pass again.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This new test case uses nbd-fault-injector.py to simulate broken TCP
connections at each stage in the NBD protocol. This way we can exercise
block/nbd-client.c's socket error handling code paths.
In particular, this serves as a regression test to make sure
nbd-client.c doesn't cause an infinite loop by leaving its
nbd_receive_reply() fd handler registered after the connection has been
closed. This bug was fixed in an earlier patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The nbd-fault-injector.py script is a special kind of NBD server. It
throws away all writes and produces zeroes for reads. Given a list of
fault injection rules, it can simulate NBD protocol errors and is useful
for testing NBD client error handling code paths.
See the patch for documentation. This scripts is modelled after Kevin
Wolf <kwolf@redhat.com>'s blkdebug block driver.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
nbd_receive_reply() is called by the event loop whenever data is
available or the socket has been closed by the remote side.
This patch closes the socket when an error occurs to prevent the
nbd_receive_reply() handler from being called indefinitely after the
connection has failed.
Note that we were already correctly returning EIO for pending requests
but leaving the nbd_receive_reply() handler registered resulted in high
CPU consumption and a flood of error messages.
Reuse nbd_teardown_connection() to close the socket.
Reported-by: Zhifeng Cai <bluewindow@h3c.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On 32-bit hosts, some compilers will warn on too large integer constants
for constants that are 64-bit in length. Explicitly put a 'ULL' suffix
on those defines.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Opening an encrypted image takes an additional step: setting the key.
Between open and the key set, the image must not be used.
We have some protection against accidental use in place: you can't
unpause a guest while we're missing keys. You can, however, hot-plug
block devices lacking keys into a running guest just fine, or insert
media lacking keys. In the latter case, notifying the guest of the
insert is delayed until the key is set, which may suffice to protect
at least some guests in common usage.
This patch makes the protection apply in more cases, in a rather
heavy-handed way: it doesn't let you open encrypted images unless
we're in a paused state.
It doesn't extend the protection to users other than the guest (block
jobs?). Use of runstate_check() from block.c is disgusting. Best I
can do right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
c5f52875 changed the size of sense array in vmstate_scsi_device by
mistake. This patch restores the old size, and add a subsection for the
remaining part of the buffer size. So that migration is not broken.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Normally VIOSRP_OK (0) means success and non-zero value means error
except VIOSRP_OK2 (0x99) which is another success code by weird accident.
This uses 0 as success code always as some guests do not cope with
the 0x99 value well. The existing linux driver checks for both VIOSRP_OK
and VIOSRP_OK2 since 2.6.32.
This returns non-zero code (VIOSRP_ADAPTER_FAIL == 0x10) on errors which
can only happen if DMA write failed.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PowerPC queue for 2.0
* Fixes for -device VGA
# gpg: Signature made Thu 13 Mar 2014 19:57:12 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/ppc-for-2.0:
spapr: Fix return value of vga initialization
Fix vga_interface_type for command line argument '-device VGA'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When running under qtest we don't actually have any vcpu threads
to be starved, so the warning about the I/O thread spinning isn't
relevant, and the way qtest manipulates the simulated clock means
the warning is produced a lot as a false positive. Suppress it if
qtest_enabled(), so 'make check' output is less noisy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
If an assertion fails during qtest_init() the SIGABRT handler is
invoked. This is the correct behavior since we need to kill the QEMU
process to avoid leaking it when the test dies.
The global_qtest pointer used by the SIGABRT handler is currently only
assigned after qtest_init() returns. This results in a segfault if an
assertion failure occurs during qtest_init().
Move global_qtest assignment inside qtest_init(). Not pretty but let's
face it - the signal handler depends on global state.
Reported-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A test is only as good as its coverage - testing virtserialport in
addition to virtconsole showed that commit
0399a3819b (virtio-console: QOM cast
cleanup for VirtConsole) broke virtserialport.
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 0399a3819b (virtio-console: QOM
cast cleanup for VirtConsole) broke virtserialport since it shares
functions and state struct with virtconsole. Let virtconsole inherit
from virtserialport, and use virtserialport type for casting.
Note that virtio-serial-port is the abstract base type in
virtio-serial-bus.c, whereas virtserialport is the user-instantiatable
type in virtio-console.c. Therefore using TYPE_VIRTIO_CONSOLE_SERIAL_PORT.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Before spapr_vga_init will returned false if the vga is specified by
the command '-device VGA' because vga_interface_type was evaluated to
VGA_NONE. With the change in previous patch of this series,
spapr_vga_init should return true if it's told that the vga will be
initialized in flow of the generic devices initialization.
To keep '-nodefaults' have the semantics of bare minimum, it adds a
check of 'has_defaults' in usb_enabled() to avoid that a USB controller
is added by '-nodefautls, -device VGA' implicitly.
This patch also makes two cleanups:
1. skip initialization for VGA_NONE
2. remove the useless 'break'
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some machine (like pseries) initialization code determines if it has
graphics according to vga_interface_type. In the original code,
vga_interface_type is evaluated to VGA_NONE even if a VGA is added
via '-device VGA'. It causes the machine not aware of the graphics
device configured. Add a new VGA device type to indicate that it has a
VGA device, which will be initialized in QOM device initialization.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Raven datasheet explains where firmware lives in system memory, so do
it there instead of in board code. Other boards using the same PCI
host will not have to copy the firmware loading code.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: Drop BIOS size workaround in favor of replacing our firmware blob]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that while such functions may exist both for *-user and softmmu,
only *-user uses the CPUState hook, while softmmu reuses the prototype
for calling it directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Remove the custom qemu_assert() function defined by target-m68k/translate.c
in favour of either using glib g_assert_not_reached() (for the genuinely
can't-happen cases) or cpu_abort() (for the "this isn't implemented",
in line with other unimplemented cases in the target).
This has the benefit of silencing some clang warnings about
variables used while uninitialized (which are emitted because
clang can't figure out that qemu_assert(0, something) never
returns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All targets using it gain the ability to set -cpu name,key=value,...
options via the default TYPE_CPU CPUClass::parse_features() implementation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUs who do not provide their own implementation of feature parsing
will treat each option as a QOM property and set it to the supplied
value.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Factor cpu_model parsing out of cpu_sparc_find_by_name() by passing
cpu_sparc_find_by_name() the name portion only and calling
CPUClass::parse_features() from cpu_sparc_register() afterwards.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Adapt the X86CPU implementation to suit the generic hook.
This involves a cleanup of error handling to cope with NULL errp.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Register separate QOM types for each x86 CPU model.
This will allow management code to more easily probe what each CPU model
provides, by simply creating objects using the appropriate class name,
without having to restart QEMU.
This also allows us to eliminate the qdev_prop_set_globals_for_type()
hack to set CPU-model-specific global properties.
Instead of creating separate class_init functions for each class, I just
used class_data to store a pointer to the X86CPUDefinition struct for
each CPU model. This should make the patch shorter and easier to review.
Later we can gradually convert each X86CPUDefinition field to lists of
per-class property defaults.
The "host" CPU model is special, as the feature flags depend on KVM
being initialized. So it has its own class_init and instance_init
function, and feature flags are set on instance_init instead of
class_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Limit the host CPU type to CONFIG_KVM as build fix]
Signed-off-by: Andreas Färber <afaerber@suse.de>
When on KVM mode, enable x2apic by default on all CPU models.
Normally we try to keep the CPU model definitions as close as the real
CPUs as possible, but x2apic can be emulated by KVM without host CPU
support for x2apic, and it improves performance by reducing APIC access
overhead. x2apic emulation is available on KVM since 2009 (Linux
2.6.32-rc1), there's no reason for not enabling x2apic by default when
running KVM.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of the feature-specific disable_kvm_pv_eoi() function, create a
more general function that can be used to disable other feature bits in
machine-type compat code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We will later make the KVM-specific code affect other feature words,
too.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some of my recent changes introduced variable declarations in the middle
of code blocks.
Fix the code so that it compiles without warnings when using
-Wdeclaration-after-statement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
As the new X86CPU subclass code is going to change lots of the code
invoving x86_def_t, let's rename the struct to match coding style first.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
As we will initialize the X86CPU fields on instance_init eventually,
move the code that initializes the X86CPU data based on the CPU model
name closer to the object_new() call.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There isn't any kind of "registration" involved in cpu_x86_register()
anymore: it is simply looking up a CPU model name and loading the model
definition data into the X86CPU object. Rename it to x86_cpu_load_def()
to reflect what it does.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Default to false.
Tidy variable naming and inline cast uses while at it.
Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
cpu->exit_request is part of the execution environment and should
not be cleared when a CPU resets.
Otherwise, we might deadlock QEMU if a CPU resets while there is
I/O going on.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The "host_device" protocol driver should strip the "host_device:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The hdev_create() implementation in block/raw-posix.c is used by the
"host_device", "host_cdrom" and "host_floppy" protocol block drivers
together. Thus, any of the associated prefixes may occur and exactly one
should should be stripped, if it does (thus,
"host_device:host_cdrom:/dev/cdrom" is not shortened to "/dev/cdrom").
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "host_cdrom" protocol drivers should strip the "host_cdrom:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "host_floppy" protocol driver should strip the "host_floppy:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "host_device" protocol driver should strip the "host_device:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Smatch complains about several global symbols which should be local.
Add the missing 'static' attributes and move the 'extern' declaration
of variable qemuio_misalign to qemu-io.h. This variable also changes
the type from 'int' to 'bool' which better fits documents its use.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the image file cannot be opened and was created as a temporary file,
it should be deleted; thus, in this case, we should jump to the
"unlink_and_fail" label and not just to "fail".
Reported-by: Benoît Canet <benoit@irqsave.net>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qcow2_open() causes writes when repairing an image with the dirty flag
set and when clearing autoclear flags. It shouldn't do this when another
qemu instance is still actively working on this image file.
One effect of the bug is that images may have a cleared dirty flag while
the migration source host still has it in use with lazy refcounts
enabled, so refcounts are not accurate and the dirty flag must remain
set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of manually building a list of all options from BDRVQcowState
values just reuse the options that were used to open the image.
qcow2_open() won't fully use all of the options in the QDict, but that's
okay.
This fixes all of the driver-specific options in qcow2, except for
lazy-refcounts, which was special cased before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "query-iothreads" command returns a list of information about
iothreads. See the patch for API documentation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Keep the thread ID around so we can report it via QMP.
There's only one problem: qemu_get_thread_id() (gettid() wrapper on
Linux) must be called from the thread itself. There is no way to get
the thread ID outside the thread.
This patch uses a condvar to wait for iothread_run() to populate the
thread_id inside the thread.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Today virtio-blk dataplane uses a 1:1 device-per-thread model. Now that
IOThreads have been introduced we can generalize this to N:M devices per
threads.
This patch drops thread code from dataplane in favor of running inside
an IOThread AioContext.
As a bonus we solve the case where a guest keeps submitting I/O requests
while dataplane is trying to stop. Previously the dataplane thread
would continue to process requests until the request gave it a break.
Now we can shut down in bounded time thanks to
aio_context_acquire/release.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a "iothread" qdev property type so devices can be hooked up to an
IOThread from the comand-line:
qemu -object iothread,id=iothread0 \
-device some-device,x-iothread=iothread0
Note that Paolo Bonzini <pbonzini@redhat.com> has suggested using QOM
links instead. This way the relationship between the objects is
reflected in QOM. There are currently shortcomings of
object_property_add_link() which prevent this use case. I will attempt
to fix them and move to QOM links in a separate series.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
get_pointer()'s print() callback might return a heap allocated
string, to avoid adding dedicated get_pointer_foo for this case
convert current print() callbacks to return temporary heap
allocated string and make get_pointer() free it.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a stand-in for Michael Roth's QContext. I expect this to be
replaced once QContext is completed.
The IOThread object is an AioContext event loop thread. This patch adds
the concept of multiple event loop threads, allowing users to define
them.
When SMP guests run on SMP hosts it makes sense to instantiate multiple
IOThreads. This spreads event loop processing across multiple cores.
Note that additional patches are required to actually bind a device to
an IOThread.
[Andreas Färber <afaerber@suse.de> pointed out that the embedded parent
object instance should be called "parent_obj" and have a newline
afterwards. This patch has been changed to reflect this.
-- Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It can be useful to run an AioContext from a thread which normally does
not "own" the AioContext. For example, request draining can be
implemented by acquiring the AioContext and looping aio_poll() until all
requests have been completed.
The following pattern should work:
/* Event loop thread */
while (running) {
aio_context_acquire(ctx);
aio_poll(ctx, true);
aio_context_release(ctx);
}
/* Another thread */
aio_context_acquire(ctx);
bdrv_read(bs, 0x1000, buf, 1);
aio_context_release(ctx);
This patch implements aio_context_acquire() and aio_context_release().
Note that existing aio_poll() callers do not need to worry about
acquiring and releasing - it is only needed when multiple threads will
call aio_poll() on the same AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QemuMutex does not guarantee fairness and cannot be acquired
recursively:
Fairness means each locker gets a turn and the scheduler cannot cause
starvation.
Recursive locking is useful for composition, it allows a sequence of
locking operations to be invoked atomically by acquiring the lock around
them.
This patch adds RFifoLock, a recursive lock that guarantees FIFO order.
Its first user is added in the next patch.
RFifoLock has one additional feature: it can be initialized with an
optional contention callback. The callback is invoked whenever a thread
must wait for the lock. For example, it can be used to poke the current
owner so that they release the lock soon.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is often useful to find an object's child property name. Also use
this new function to simplify the implementation of
object_get_canonical_path().
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch keep the recursive way of doing things but simplify it by giving
two responsabilities to all block filters implementors.
They will need to do two things:
-Set the is_filter field of their block driver to true.
-Implement the bdrv_recurse_is_first_non_filter method of their block driver like
it is done on the Quorum block driver. (block/quorum.c)
[Paolo Bonzini <pbonzini@redhat.com> pointed out that this patch changes
the semantics of blkverify, which now recurses down both bs->file and
s->test_file.
-- Stefan]
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Extend test file 060 by a test case for corruption occuring concurrently
to a COW request. QEMU should not crash but rather return an appropriate
error message.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, bdrv_debug_resume() requires every bs->drv in the BDS stack
to be NULL until a bs->drv with an implementation of bdrv_debug_resume()
is found. For a normal function, this would be fine, but this is a
function for debugging purposes and should therefore allow intermediate
BDS not to have a driver (i.e., be "ejected"). Otherwise, it is hard to
debug such situations.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Before dereferencing bs->drv for a call to its member bdrv_co_readv(),
copy_sectors() should check whether that pointer is indeed valid, since
it may have been set to NULL by e.g. a concurrent write triggering the
corruption prevention mechanism.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After migration has completed, we call bdrv_invalidate_cache() so that
drivers which cache some data drop their stale copy of the data and
reread it from the image file to get a new version of data that the
source modified while the migration was running.
Reloading metadata from the image file is useless, though, if the size
of the image file stays stale (this is a value that is cached for all
image formats in block.c). Reads from (meta)data after the old EOF
return only zeroes, causing image corruption.
We need to update bs->total_sectors in all layers that could potentially
have changed their size (i.e. backing files are not a concern - if they
are changed, we're in bigger trouble)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When reading the refcount table entry in get_refcount(), only bits which
are actually significant for the refcount block offset should be taken
into account.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Older versions of gcc (eg 4.6) can't handle varargs functions declared
inline for anything other than completely trivial uses, and complain:
tests/qom-test.c: In function 'qmp': tests/libqtest.h:359:60: sorry,
unimplemented: function 'qmp' can never be inlined because it uses
variable argument lists
Avoid this problem by putting the functions into libqtest.c instead
of using inline definitions in libqtest.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Fix a bug that was introduced in commit 386a5a1e. A removal of a device
set the chr handlers to NULL. However when the device is plugged back,
its read callback is not restored so data can't be transferred from the
host to the guest (e.g. via the virtio-serial port).
https://bugzilla.redhat.com/show_bug.cgi?id=1027181
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This converts the old-style SysBusDevice::init() callback to a new-style
DeviceClass::realize() callback.
As a part of conversion, this replaces fprintf(stderr) with error_setg()
as realize() does not "return" any value, instead it puts the extended
error into **errp.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently interrupt priorities are set to 0 (highest) at the very
beginning of the guest execution which is not correct and makes the guest
produce random interrupt error messages such as:
"Interrupt 0x1001 (real) is invalid, disabling it".
This also prevents interrupt states from correct migration.
This initializes priority to 0xFF as the emulated XICS does.
Suggested-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The changelog is:
> version: update to 20140304
> Introduce dummy console device
> vio-vscsi: Fix CRQ allocation alignment
> version: update to 20140204
> virtio-9p: disable unused structure
> Make "boot net:dhcp" boot from IPv4 only
> Fix virtio device shutdown
> Change shutdown method name for virtio-scsi
> Add support for 64bit LE ABI v1 and v2 support
> Change representation of string environment variable
> cas: return error when unknown node found
> version: update
> Reset obp-tftp arguments before parsing
> Enable seamless netboot on IPv6 network
> Fix shutdown for virtio devices
> Fix zero checksum in UDP header
> Handle router advertisement message properly
> [oex]hci_exit: Check before freeing/unmapping memory
> Work around missing sc 1 traps on pHyp
> fix print_version() to return where it came from
> usb-xhci: memory freeing and using returns as bool uniformly
> Output banner and initial display output in VNC window
> use VERSION file to generate FW version
> cas: remove warning
> Add support for loading little endian ELF binaries.
> Add bswap_{16,32,64}p
> dhcpv6 and other minor net-snk fixes
> Fix missing drop in virtio-fs setup-alias
> Find next available alias name
> SLOF does not exit if given 1KB disk
> boot: enable support for bootindex
> pci-properties: add properties to enable hotplug for spapr
> e1000: remember node handle
> Increase quiesce tokens array size
> virtio: timeout after 5sec
> Enable IPv6 support in dns
> usb-ohci: fix warnings
> Add ipv6 support in net-snk
> ipv4: fix frame overwriting following arp_send_request
> e1000: fix SLOF_dma_map_out arguments
> Maintain single global packet buffer for tftp
> Increase virtio-net receive queue size
> Increase veth receive queue size
> Fix dprintf macros at various points
> usb-ohci: rewrite done_head processing code
> boot: add net in default boot order
> block 0 address in the allocator
> scsi: make-media-alias fix
> usb-xhci: add xhci host controller support
> usb-xhci: add xhci support
> Avoid veth read/write calls with zero length buffer
> boot: include other aliases
> usb-core: disable xhci
Cc: Andreas Färber <afaerber@suse.de>
Cc: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
As reported in commit 9c06a1f79f, xen.h is
not self-contained with regards to its use of QEMUMachine. Fix this.
Reported-by: Alexander Graf <agraf@suse.de>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This reverts commit 9c06a1f79f.
The new header sysemu/qemumachine.h is undesired.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
'socket_accept' waits for QEMU to init its unix socket.
If QEMU encounters an error during command line parsing,
it can exit before initializing the communication channel.
Using a timeout for sockets fixes the issue.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use the realize and unrealize hooks to register and unregister
vmstate_pcibus respectively.
Relocate some stuff to avoid forward declarations.
Signed-off-by: Bandan Das <bsd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[AF: Keep using PCI_BUS() cast macro]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Integrate (un)realization of child buses with realization/unrealization
of the device hosting them. Code in device_unparent() is reordered for
unrealization of buses to work as part of device unrealization.
That way no changes need to be made to bus instantiation.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add a "realized" property calling realize/unrealize hooks as for devices.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This adds a test whether sPAPR PHB can be added via the command line.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Recursively walk all properties under /machine and try to retrieve their
value. This is a regression test for link<> properties and the
DeviceState::hotpluggable property.
Cf. be2f78b6b0 and
1a37eca107
Signed-off-by: Andreas Färber <afaerber@suse.de>
In order to allow attaching machine options to a machine instance,
current_machine is converted into MachineState.
As a first step of deprecating QEMUMachine, some of the functions
were modified to return MachineClass.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The machine registration flow is refactored to use the QOM functionality.
Instead of linking the machines into a list, each machine has a type
and the types can be traversed in the QOM way.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The main functional change is to convert QEMUMachine into MachineClass
and QEMUMachineInitArgs into MachineState, instance of MachineClass.
As a first step, in order to make possible an incremental development,
both QEMUMachine and QEMUMachineInitArgs are being embedded into the
new types.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Test the error class instead. Expecting a specific message is
fragile. In fact, it broke once already, in commit 75884af. Restore
the test of error member "class" dropped there, and drop the test of
error member "desc".
There are no other tests of "desc" as far as I can tell.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use g_assert_cmpstr() instead of combining g_assert() and strcmp(3).
This simplifies the code since we no longer have to play games to
distinguish NULL from "" using "(null)".
gcc extension haters will also be happy that ?: was dropped.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Previously libvirt required the first/default PCI bus to have name "pci".
Since QEMU can support multiple buses now, libvirt wants "pci.0" now.
This removes custom bus name and lets QEMU make up default names.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There are no usages left of this legacy cast. Delete.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Rename SSISlave parent field]
Signed-off-by: Andreas Färber <afaerber@suse.de>
ssi: Rename parent field
Define and use QOM cast macro. Removes some usages of legacy casting
systems.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Rename parent field]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Create an abstract class that encompasses both max111x variants. This is
needed for QOM cast macro creation (and is the right thing to do
anyway). Macroify type-names in the process.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Remove two legacy ->qbus style casts from TYPE_SSI_BUS to TYPE_BUS in
ssi.c.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Convert one missing ->qbus and rename parent field]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Convert legacy ->qdev style casts from TYPE_SSI_SLAVE to TYPE_DEVICE.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Introduce local DeviceState variable for transition to QOM realize]
Signed-off-by: Andreas Färber <afaerber@suse.de>
When object_property_add_str() and object_property_add_bool() fail, they
leak their internal StringProperty and BoolProperty structs. Remember
to free the structs on error.
Luckily this is a low-impact memory leak since most QOM properties are
static qdev properties that will never take the error case.
object_property_add() only fails if the property name is already in use.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Test steps:
(qemu) device_add e1000,addr=adsf
Property 'e1000.addr' doesn't take value 'adsf'
(qemu) info qtree
Then qemu crashed.
Currently we set a link to the new device from its parent bus, but the
device hasn't been added to QOM tree yet. When it fails to set properties,
object_unparent() can't clean up the device.
Delay setting of device properties until the device has been added to
the QOM composition tree. This way, when setting a property fails,
object_unparent() can clean up the device properly.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move setting DeviceClass::hotpluggable default from device's
class_base_init() to device's class_init().
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 1a37eca107 (qdev: add
"hotpluggable" property to Device) added a property "hotpluggable" to
each device, with its getter accessing parent_bus->allow_hotplug.
Add a NULL check.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Net patches
# gpg: Signature made Wed 12 Mar 2014 13:48:20 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/net-pull-request:
tap: avoid deadlocking rx
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Functionally, this is a revert of Jocelyn's r3309 /
55aa45ddde (Quickly hack PowerPC BIOS
able to boot on CDROM again.), for which we do not have the sources.
Therefore the sources used are v0.4.1 plus pc-bios/ohw.diff plus a
workaround turning IDE errors into warnings.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Tracing pull request
# gpg: Signature made Wed 12 Mar 2014 13:20:10 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: Fix build warnings for Win32 build
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Docs: Introduce multiport serial support in qemupciserial.inf.
# gpg: Signature made Wed 12 Mar 2014 09:35:55 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-misc-1:
Docs: Introduce multiport serial support in qemupciserial.inf.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Win32 build warns about trace/control-internal.h:
warning: 'trace_event_count' declared inline after being called
Fix this by simply reordering trace_event_id() and
trace_event_count().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* remotes/kiszka/queues/slirp:
slirp smb with modern win guests when samba is also running on host
qemu/slirp: Fix SMB security configuration on newer samba versions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/qmp-unstable/queue/qmp:
tests: test-qmp-commands: Fix double free
qapi script: do not add "_" for every capitalized char in enum
qapi script: do not allow string discriminator
qapi: convert BlockdevOptions to use enum discriminator
qapi script: support enum type as discriminator in union
qapi script: use same function to generate enum string
qapi script: code move for generate_enum_name()
qapi script: check correctness of union
qapi script: remember line number in schema parsing
qapi script: add check for duplicated key
qapi script: remember explicitly defined enum values
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hook into scroll-event to properly forward mouse wheel movements to the
guest, just like we already do in SDL.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Restores traditional behavior: Keyboard input will be routed to the most
recently added keyboard. Without this all kbd input goes to the ps/2
keyboard, even if you add a usb keyboard to your guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Support for pci-serial-2x and pci-serial-4x
was added to the inf file.
Standard Windows driver mf.sys used to
split single function device into per-port nodes.
Signed-off-by: Miki Mishael <mmishael@redhat.com>
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The net subsystem has a control flow mechanism so peer NetClientStates
can tell each other to stop sending packets. This is used to stop
monitoring the tap file descriptor for incoming packets if the guest rx
ring has no spare buffers.
There is a corner case when tap_can_send() is true at the beginning of
an event loop iteration but becomes false before the tap_send() fd
handler is invoked.
tap_send() will read the packet from the tap file descriptor and attempt
to send it. The net queue will hold on to the packet and return 0,
indicating that further I/O is not possible. tap then stops monitoring
the file descriptor for reads.
This is unlike the normal case where tap_can_send() is the same before
and during the event loop iteration. The event loop would simply not
monitor the file descriptor if tap_can_send() returns true. Upon next
iteration it would check tap_can_send() again and begin monitoring if we
can send.
The deadlock happens because tap_send() explicitly disabled read_poll.
This is done with the expectation that the peer will call
qemu_net_queue_flush(). But hw/net/virtio-net.c does not monitor
vm_running transitions and issue the flush. Hence we're left with a
broken tap device.
Cc: qemu-stable@nongnu.org
Reported-by: Neil Skrypuch <neil@tembosocial.com>
Tested-by: Neil Skrypuch <neil@tembosocial.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After numerous reports that -smb (or -netdev user,smb=foo) not working
with modern windows (win7 and vista are reported as non-working), I
started digging myself. And found that indeed it doesn't work, and
why.
The thing is that modern win tries to connect to port 445 (microsoft-ds)
first, and if that fails, it falls back to old port 139 (netbios-ssn).
slirp code in qemu only redirects port 139, it does not touch port 445.
So the prob is that if samba is also running on the host, guest will try
to communicate using port 445, and that will succed, but ofcourse guest
will not talk with our samba but with samba running on the host.
If samba is not running on the host, guest will fall back to port 139,
and will reach the redirecting rule and qemu will spawn smbd correctly.
The solution is to redirect both ports (139 and 445), and the fix is
a one-liner, adding second call to slirp_add_exec() at the end of
net/slirp.c:slirp_smb() function (provided below).
But it looks like that is not a proper fix really, since in theory
we should redirect both ports to the SAME, single samba instance,
but I'm not sure this is possible with slirp. Well, even if two
smbd processes will be run on the same config dir, it should not
be a problem.
The one-liner (not exactly 1 since it touches previous line too) is like
this:
Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The smb.conf automatically generated by qemu's -smb option fails on current
samba, because smbd rejects the security=share option with the following warning:
> WARNING: Ignoring invalid value 'share' for parameter 'security'
Which makes it fall back to security=user without guest login.
This results in being unable to login to the samba server from the guest OS.
This fixes it by selecting 'user' explicitly and mapping
unknown users to guest logins.
Signed-off-by: Michael Buesch <m@bues.ch>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The LEON3 processor has support for the CASA instruction which is
normally only available for SPARC V9 processors. Binutils 2.24
and GCC 4.9 will support this instruction for LEON3. GCC uses it to
generate C11 atomic operations.
The CAS synthetic instruction uses an ASI of 0x80. If TARGET_SPARC64 is
not defined use a supervisor data load/store for an ASI of 0x80 in
helper_ld_asi()/helper_st_asi(). The supervisor data load/store was
choosen according to the LEON3 documentation.
The ASI 0x80 is defined in the SPARC V9 manual, Table 12—Address Space
Identifiers (ASIs). Here we have: 0x80, ASI_PRIMARY, Unrestricted
access, Primary address space.
Tested with the following program:
#include <assert.h>
#include <stdatomic.h>
void test(void)
{
atomic_int a;
int e;
_Bool b;
atomic_store(&a, 1);
e = 1;
b = atomic_compare_exchange_strong(&a, &e, 2);
assert(b);
assert(atomic_load(&a) == 2);
atomic_store(&a, 3);
e = 4;
b = atomic_compare_exchange_strong(&a, &e, 5);
assert(!b);
assert(atomic_load(&a) == 3);
}
Tested also on a NGMP board with a LEON4 processor.
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
acpi,pc,test bug fixes
More small fixes: the issues annoy developers so
I thought they are worth fixing quickly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 11 Mar 2014 11:27:44 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
acpi-test: update expected SSDT files
acpi-build: don't access unaligned addresses
q35: Correct typo BRDIGE -> BRIDGE
configure: don't modify .status on error
pc: avoid duplicate names for ROM MRs
loader: rename in_ram/has_mr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/kvm/uq/master:
target-i386: bugfix of Intel MPX
file_ram_alloc: unify mem-path,mem-prealloc error handling
kvm-all: exit in case max vcpus exceeded
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target-arm queue:
* implement WFE as yield (improves performance with emulated SMP)
* fixes to avoid undefined behaviour shifting left into sign bit
* libvixl format string fixes for 32 bit hosts
* fix build error when intptr_t and tcg_target_long are different
sizes (eg x32)
* implement PMCCNTR register
* fix incorrect setting of E bit in CPSR (broke booting under
KVM on ARM)
# gpg: Signature made Mon 10 Mar 2014 15:05:25 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140310:
target-arm: Implement WFE as a yield operation
hw/arm/musicpal: Avoid shifting left into sign bit
hw/ssi/xilinx_spips.c: Avoid shifting left into sign bit
hw/arm/omap1.c: Avoid shifting left into sign bit
pxa2xx: Don't shift into sign bit
libvixl: Fix format strings for several int64_t values
target-arm: Fix intptr_t vs tcg_target_long
target-arm: Implements the ARM PMCCNTR register
target-arm: Fix incorrect setting of E bit in CPSR
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now "enum AIOContext" will generate AIO_CONTEXT instead of A_I_O_CONTEXT,
"X86CPU" will generate X86_CPU instead of X86_C_P_U.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since enum based discriminators provide better type-safety and
ensure that future qapi additions do not forget to adjust dependent
unions, forbid using string as discriminator from now on.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
After this patch, hidden enum type BlockdevOptionsKind will not
be generated, and other API can use enum BlockdevDriver.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
By default, any union will automatically generate a enum type as
"[UnionName]Kind" in C code, and it is duplicated when the discriminator
is specified as a pre-defined enum type in schema. After this patch,
the pre-defined enum type will be really used as the switch case
condition in generated C code, if discriminator is an enum field.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Prior to this patch, qapi-visit.py used custom code to generate enum
names used for handling a qapi union. Fix it to instead reuse common
code, with identical generated results, and allowing future updates to
generation to only need to touch one place.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since line info is remembered as QAPISchema.line now, this patch
uses it as additional info for every expr in QAPISchema inside qapi.py,
then improves error message with it in checking of exprs.
For common union the patch will check whether base is a valid complex
type if specified. For flat union it will check whether base presents,
whether discriminator is found in base, whether the key of every branch
is correct when discriminator is an enum type.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Before this patch, 'QAPISchemaError' scans whole input until 'pos'
to get error line number. After this patch, the scan is avoided since
line number is remembered in schema parsing. This patch also benefits
other error report functions, which would be introduced later.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It is bad that same key was specified twice, especially when a union has
two branches with same condition. This patch can prevent it.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
casting an unaligned address to e.g.
uint32_t can trigger undefined behaviour in C.
Replace cast + assignment with memcpy.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
./configure --help
make
will try to re-run configure with --help
which isn't what was intended.
The reason is that config.status was written
even on configure error.
Defer writing config.status until configure
has completed successfully.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Since
commit 04920fc0fa
loader: store FW CFG ROM files in RAM
RAM MRs including ROM files in FW CFGs are created
and named using the file basename.
This becomes problematic if these names are
supplied by user, since the basename might not
be unique.
There are two cases we care about:
- option-rom flag.
- option ROM for devices. This triggers e.g. when
using rombar=0.
At the moment we get an assert. E.g
qemu -option-rom /usr/share/ipxe/8086100e.rom -option-rom
/usr/share/ipxe.efi/8086100e.rom
RAMBlock "/rom@genroms/8086100e.rom" already registered, abort!
This is a regression from 1.6.
For now let's keep it simple and just avoid creating the
MRs in case of option ROMs.
when using 1.7 machine types, enable
option ROMs in RAM to match that version.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi,pc,pci,virtio,memory bug fixes
This collects several small fixes from all over the place.
Additionally, Marcel's changes make acpi unit tests more robust.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 09 Mar 2014 19:14:57 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
qemu: x86: ignore ioapic polarity
pckbd: return 'keyboard enabled' on read input port command
pam: partly fix write-only mode
acpi-test: issue errors instead of warnings when possible
acpi-test: retain both asl and aml files on failure
MAINTAINERS: drop an out of date address
Add a 'name' parameter to qemu_thread_create
Add 'debug-threads' suboption to --name
Rework --name to use QemuOpts
PCIE: fix regression with coldplugged multifunction device
memory_region_present: return false if address is not found in child MemoryRegion
virtio-net: remove function calls from assert
acpi-test-data: update expected files
acpi-build: append description for non-hotplug
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/riku/linux-user-for-upstream:
linux-user: set minimum kernel version to 2.6.32
linux-user: correct handling of break exception for MIPS
linux-user: translate signal number on return from sigtimedwait
linux-user: Implement sendmmsg syscall
linux-user: Fix getresuid, getresgid if !USE_UID16
linux-user: Don't use UID16 on AArch64
linux-user: AArch64: Implement SA_RESTORER for signal handlers
linux-user/signal.c: Fix AArch64 big-endian FP register restore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement WFE to yield our timeslice to the next CPU.
This avoids slowdowns in multicore configurations caused
by one core busy-waiting on a spinlock which can't possibly
be unlocked until the other core has an opportunity to run.
This speeds up my test case A15 dual-core boot by a factor
of three (though it is still four or five times slower than
a single-core boot).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393339545-22111-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Rob Herring <rob.herring@linaro.org>
Commit 4cc35614a moved the exception mask bits out of env->uncached_cpsr
and into env->daif. However the env->daif contents are AArch64 style
mask bits, which include not just the AArch32 AIF bits but also the
new D bit (masks debug exceptions). This means that when reconstructing
the AArch32 CPSR value we must not allow the D bit in env->daif to get
into the CPSR, because the corresponding bit in the CPSR is E, the
endianness bit.
This bug didn't affect execution under TCG because we don't implement
endianness-swapping and so simply ignored the E bit; however it meant
that kernel booting under KVM failed, because KVM does honour the E bit.
Reported-by: Alexey Ignatov <lexszero@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of
spice support no (/)
configure now prints
spice support no
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* remotes/rth/tcg-aarch-6-1:
tcg-aarch64: Remove nop from qemu_st slow path
tcg-aarch64: Simplify tcg_out_ldst_9 encoding
tcg-aarch64: Use intptr_t apropriately
tcg-aarch64: Remove the shift_imm parameter from tcg_out_cmp
tcg-aarch64: Hoist common argument loads in tcg_out_op
tcg-aarch64: Don't handle mov/movi in tcg_out_op
tcg-aarch64: Set ext based on TCG_OPF_64BIT
tcg-aarch64: Change all ext variables to TCGType
tcg-aarch64: Remove redundant CPU_TLB_ENTRY_BITS check
tcg-aarch64: Enable builtin disassembler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Popular glibc based distributions[1] require minimum
2.6.32 as kernel version. For some targets 2.6.18
would be enough, but dropping so low would mean some
suboptimal system calls could get used.
Set the minimum kernel advertized to 2.6.32 for
all architectures but aarch64 to ensure working qemu
linux-user in case host kernel is older.
[1] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/921078
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
migration/next for 20140308
# gpg: Signature made Sat 08 Mar 2014 21:26:01 GMT using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20140308-1:
migration: extend section_start/end traces
vl: add system_wakeup_request tracepoint
qemu_file: Fix mismerge of "use fwrite() correctly"
XBZRLE: Fix qemu crash when resize the xbzrle cache
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
- vnc_update_client_new2: 0.29 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.07 secs
- vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
vnc_update_client_new2 shows the performance of vnc_update_client
with this patch added.
Comparing with the test run of the last patch the performance
is at least unchanged while it is significantly improved
for the all bits dirty case.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_update_client currently scans the dirty bitmap of each client
bitwise which is a very costly operation if only few bits are dirty.
vnc_refresh_server_surface does almost the same.
this patch optimizes both by utilizing the heavily optimized
function find_next_bit to find the offset of the next dirty
bit in the dirty bitmaps.
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.08 secs
vnc_update_client_old: 10.98 secs
The case for all bits dirty is still rather slow, this
is due to the implementation of find_and_clear_dirty_height.
This will be addresses in a separate patch.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this allows for setting VNC_DIRTY_PIXELS_PER_BIT to different
values than 16 if desired.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spotted by Coverity:
876 static int vnc_update_client_sync(VncState *vs, int has_dirty)
877 {
(1) Event freed_arg: "vnc_update_client(VncState *, int)" frees "vs". [details]
Also see events: [deref_arg]
878 int ret = vnc_update_client(vs, has_dirty);
(2) Event deref_arg: Calling "vnc_jobs_join(VncState *)" dereferences freed pointer "vs". [details]
Also see events: [freed_arg]
879 vnc_jobs_join(vs);
880 return ret;
881 }
Remove vnc_update_client_sync wrapper, replace it with an additional
argument to vnc_update_client, so we can so the sync properly in
vnc_update_client (i.e. skip it in case of a client disconnect).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Hi,
When I use RealVNC viewer client (http://www.realvnc.com/) to connect vnc server,
the client disconnect suddenly, and I click reconnect button immediately, then the Qemu crashed.
In the function vnc_worker_thread_loop, will call vnc_async_encoding_start
to set the local vs->output buffer by global queue's buffer. Then send rectangles to
the vnc client call function vnc_send_framebuffer_update. Finally, Under normal circumstances,
call vnc_async_encoding_end to set the global queue'buffer by the local vs->output conversely.
When the vnc client disconnect, the job->vs->csock will be set to -1. And the current prcoess
logic will goto disconnected partion without call function vnc_async_encoding_end.
But, the function vnc_send_framebuffer_update will call buffer_reserve, which
maybe call g_realloc reset the local vs's buffer, meaning the global queue's buffer is modified also.
If anyone use the original global queue's buffer memory will cause corruption and then crash qemu.
This patch assure the function vnc_async_encoding_end being called
even though the vnc client disconnect suddenly.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
VncTight member uint8_t quality is either (uint8_t)-1 for lossless or
less than 10 for lossy.
tight_detect_smooth_image() first promotes it to int, then compares
with -1. Always unequal, so we always execute the lossy code. Reads
beyond tight_conf[] and returns crap when quality is actually
lossless.
Compare to (uint8_t)-1 instead, like we do elsewhere.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
we put copy of ROMs in MR for migration.
but the name rom_in_ram makes one think we
load it in guest RAM.
Rename has_mr to make intent clearer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both QEMU and KVM have already accumulated a significant number of
optimizations based on the hard-coded assumption that ioapic polarity
will always use the ActiveHigh convention, where the logical and
physical states of level-triggered irq lines always match (i.e.,
active(asserted) == high == 1, inactive == low == 0). QEMU guests
are expected to follow directions given via ACPI and configure the
ioapic with polarity 0 (ActiveHigh). However, even when misbehaving
guests (e.g. OS X <= 10.9) set the ioapic polarity to 1 (ActiveLow),
QEMU will still use the ActiveHigh signaling convention when
interfacing with the emulated ioapic.
This patch modifies the emulated ioapic to completely ignore polarity
as set by the guest OS, enabling misbehaving guests to work alongside
those which comply with the ActiveHigh polarity specified by QEMU's
ACPI tables.
Signed-off-by: Gabriel L. Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bit 7 of Input Port is the keyboard inhibit switch.
0 means keyboard inhibited, while 1 means keyboard enabled.
Incidentaly, this also fixes an error encountered while booting
an Award BIOS: "Keyboard is locked out - Unlock the key".
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In write-only mode, writes are forwarded to RAM, while reads should not be
handled (ie should return 0xff).
Assume that in this mode, no read access is ever done, as they shouldn't
give any sensible result.
So, in write-only mode, alias PAM region to RAM, instead of PCI memory
(which can even be mapped to some device!)
This fixes Award BIOS, which use this mode to shadow system BIOS and video BIOS.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the expected (offline) acpi tables loaded correctly,
it is safe to assume the iasl installation is OK and
issue an error if the actual tables failed to load.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Updated the error message while at it.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gleb's address seems to be out of date. Since it stayed like that for a
while now, I'm guessing he's no longer interested in getting mail.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If enabled, set the thread name at creation (on GNU systems with
pthread_set_np)
Fix up all the callers with a thread name
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add flag storage to qemu-thread-* to store the namethreads flag
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Windows XP shows COM2 port as non functional in
"Device Manager" although no COM2 port backing device
is present in QEMU.
This regression is really due to
3bb28b7208b349e7a1b326e3c6ef9efac1d462bf?
memory: Provide separate handling of unassigned io ports accesses
That is caused by the fact that QEMU reports to
OSPM that device is present by setting 5th bit in
PII4XPM.pci_conf[0x67] register when COM2 doesn't
exist.
It happens due to memory_region_present(io_as, 0x2f8)
returning false positive since 0x2f8 address eventually
translates into catchall io_as address space.
Fix memory_region_present(parent, addr) by returning
true only if addr maps into a MemoryRegion within
parent (excluding parent itself), to match its
doc comment.
While at it fix copy/paste error in
memory_region_present() doc comment.
Note: this is a temporary hack: we really need better handling for
unassigned regions, we should avoid fallback regions since they are bad
for performance (breaking radix tree assumption that the data structure
is sparsely populated); for memory we need to fix this to implement PCI
master abort properly, anyway.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
peer_{de,at}tach were called from inside assert().
We don't support building without NDEBUG but it's not tidy.
Rearrange to attach peer outside assert calls.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As reported in
http://article.gmane.org/gmane.comp.emulators.qemu/253987
Mac OSX actually requires describing all occupied slots
in ACPI - even if hotplug isn't enabled.
I didn't expect this so I dropped description of all
non hotpluggable slots from ACPI.
As a result: before
commit 99fd437dee (enable
hotplug for pci bridges), PCI cards show up in the "device tree" of OS X
(System Information). E.g., on MountainLion users have:
Hardware -> PCI Cards:
Card Type Driver Installed Slot
*ethernet Ethernet Controller Yes PCI Slot 2
pci8086,2934 USB UHC Yes PCI Slot 29
ethernet:
Type: Ethernet Controller
Driver Installed: Yes
MSI: No
Bus: PCI
Slot PCI Slot 2
Vendor ID: 0x8086
Device ID: 0x100e
Subsystem Vendor ID: 0x1af4
Subsystem ID: 0x1100
Revision ID: 0x0003
Hardware -> Ethernet Cards
ethernet:
Type: Ethernet Controller
Bus: PCI
Slot PCI Slot 2
Vendor ID: 0x8086
Device ID: 0x100e
Subsystem Vendor ID: 0x1af4
Subsystem ID: 0x1100
Revision ID: 0x0003
BSD name: en0
Kext name: AppleIntel8254XEthernet.kext
Location: /System/Library/Extensions/...
Version: 3.1.1b1
After commit 99fd437dee, users get:
Hardware -> PCI Cards:
This computer doesn't contain any PCI cards. If you installed PCI
cards, make sure they're properly installed.
Hardware -> Ethernet Cards
ethernet:
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x8086
Device ID: 0x100e
Subsystem Vendor ID: 0x1af4
Subsystem ID: 0x1100
Revision ID: 0x0003
BSD name: en0
Kext name: AppleIntel8254XEthernet.kext
Location: /System/Library/Extensions/...
Version: 3.1.1b1
Ethernet still works, but it's not showing up on the PCI bus, and it
no longer thinks it's plugged in to slot #2, as it used to before the
change.
To fix, append description for all occupied non hotpluggable PCI slots.
One need to be careful when doing this: VGA devices
are now described in SSDT, so we need to drop description from DSDT.
And ISA devices are used in DSDT so drop them from SSDT.
Reported-by: Gabriel L. Somlo <gsomlo@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Also update generated dsdt and pcihp hex dump files.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At first glance the code appears to be using 1's compliment encoding,
a-la AArch32. Except that the constant is "off", creating a complicated
split field 2's compliment encoding.
Much clearer to just use a normal mask and shift.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
It was unused. Let's not overcomplicate things before we need them.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We assert that the values for _I32 and _I64 are 0 and 1 respectively.
This will make a couple of functions declared by tcg.c cleaner.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This adds @idstr to savevm_section_start and savevm_section_end
tracepoints.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Resizing the xbzrle cache during migration causes qemu-crash,
because the main-thread and migration-thread modify the xbzrle
cache size concurrently without lock-protection.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* remotes/kvaneesh/for-upstream:
hw/9pfs: Include virtio-9p-device.o in build
hw/9pfs: use g_strdup_printf() instead of PATH_MAX limitation
hw/9pfs/virtio-9p-local.c: use snprintf() instead of sprintf()
hw/9pfs/virtio-9p-local.c: move v9fs_string_free() to below "err_out:"
fsdev: Fix overrun after readlink() fills buffer completely
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block patches
# gpg: Signature made Fri 07 Mar 2014 13:30:04 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
block: qemu-iotests 085 - live snapshots tests
hw/ide/ahci.h: Avoid shifting left into sign bit
block: Fix error path segfault in bdrv_open()
qemu-iotests: Test a few blockdev-add error cases
blockdev: Fix NULL pointer dereference in blockdev-add
blockdev: Fail blockdev-add with encrypted images
block/raw-win32: Strip "file:" prefix on creation
block/raw-win32: Implement bdrv_parse_filename()
block/raw-posix: Strip "file:" prefix on creation
block/raw-posix: Implement bdrv_parse_filename()
block: Keep "filename" option after parsing
block: mirror - remove code cruft that has no function
block: make bdrv_swap rebuild the bs graph node list field.
block: Fix bs->request_alignment assertion for bs->sg=1
iscsi: Use bs->sg for everything else than disks
qemu-iotests: Test progress output for conversion
qemu-img convert: Fix progress output
gluster: Remove unused defines and header include
gluster: Change licence to GPLv2+
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Input handling rewrite.
SDL2 support.
# gpg: Signature made Wed 05 Mar 2014 11:16:08 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-input-4: (38 commits)
ui/sdl2 : initial port to SDL 2.0 (v2.0)
console: add QemuUIInfo
console: add head to index to qemu consoles.
input: remove index_from_keycode (no users)
input: move do_mouse_set to new core
input: move qmp_query_mice to new core
input: add input_mouse_mode tracepoint
input: move mouse mode notifier to new core
input-legacy: remove kbd_mouse_event
input-legacy: remove kbd_mouse_is_absolute
input-legacy: remove kbd_mouse_has_absolute
input-legacy: remove kbd_put_keycode
input: trace events
input: mouse: switch cocoa ui to new core
input: keyboard: switch cocoa ui to new core
input: mouse: switch monitor to new core
input: mouse: switch spice ui to new core
input: mouse: switch vnc ui to new core
input: mouse: switch sdl ui to new core
input: mouse: switch gtk ui to new core
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Patch queue for ppc - 2014-03-05
This pull request includes:
- VSX emulation support
- book3s pr/hv selection
- some bug fixes
- qdev stable numbering
- eTSEC emulation
# gpg: Signature made Wed 05 Mar 2014 02:14:19 GMT using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (130 commits)
target-ppc: spapr: e500: fix to use cpu_dt_id
target-ppc: add PowerPCCPU::cpu_dt_id
target-ppc: Introduce hypervisor call H_GET_TCE
target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab
target-ppc: Change the hpte store API
target-ppc: Fix page table lookup with kvm enabled
target-ppc: Fix htab_mask calculation
target-ppc: Use Additional Temporary in stqcx Case
target-ppc: Fix Compiler Warnings Due to 64-Bit Constants Declared as UL
PPC: sPAPR: Only use getpagesize() when we run with kvm
target-ppc/translate.c: Use ULL suffix for 64 bit constants
spapr-vlan: flush queue whenever can_receive can go from false to true
target-ppc: Altivec 2.07: Vector Permute and Exclusive OR
target-ppc: Altivec 2.07: Vector SHA Sigma Instructions
target-ppc: Altivec 2.07: AES Instructions
target-ppc: Altivec 2.07: Binary Coded Decimal Instructions
target-ppc: Altivec 2.07: Vector Polynomial Multiply Sum
target-ppc: Altivec 2.07: Vector Gather Bits by Bytes
target-ppc: Altivec 2.07: Doubleword Compares
target-ppc: Altivec 2.07: vbpermq Instruction
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One patch introducing support for adapter interrupts in virtio-ccw.
This improves performance for those guests that issue the new
CCW_CMD_SET_IND_ADAPTER channel command.
# gpg: Signature made Wed 05 Mar 2014 08:48:18 GMT using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found
* remotes/cohuck/tags/virtio-ccw-20140305:
s390x/virtio-ccw: Adapter interrupt support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add 'U' suffixes to avoid undefined behaviour shifting left into
the signed bit of a signed integer type. Clang's sanitizer will
warn about this:
hw/ide/ahci.c:1210:27: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
MacOSX doesn't pull .o files from .a archives if the symbol that it
requires is one which the .o file defines as a common symbol.
(Common symbols are those declared without "extern"; the linker
will merge together common symbols with the same name, so
redeclaring the same variable in two compilation units results in
them referring to the same symbol rather than a compilation error).
This MacOSX difference from traditional linker behaviour means that
"make check" produces link errors:
Undefined symbols for architecture x86_64:
"_cur_mon", referenced from:
_error_vprintf in libqemuutil.a(qemu-error.o)
_error_printf in libqemuutil.a(qemu-error.o)
_error_printf_unless_qmp in libqemuutil.a(qemu-error.o)
_error_print_loc in libqemuutil.a(qemu-error.o)
_error_report in libqemuutil.a(qemu-error.o)
ld: symbol(s) not found for architecture x86_64
in this case because "cur_mon" is a common symbol in
libqemustub.a(mon-set-error.o).
In QEMU we don't make any use at all of the common symbol
functionality, so we can avoid this problem entirely simply
by compiling with -fno-common. Enable this option for all
builds, not just MacOSX, so that if we ever inadvertently
introduce multiple definitions of some variable that will
be immediately spotted as a build error rather than only
breaking the MacOSX build.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1393451610-24617-1-git-send-email-peter.maydell@linaro.org
gcc's C++ compiler complains about being passed some -W options
which make sense for C but not for C++. This means we mustn't try
a C++ compile with QEMU_CFLAGS, but only with a filtered version
that removes the offending options. This filtering was already being
done for uses of C++ in the build itself, but was omitted for the
"does C++ work?" configure test. This only showed up when doing
builds which explicitly enabled -Werror with --enable-werror,
because the "do the compilers work" tests were mistakenly placed
above the "default werror based on whether compiling from git" code.
Another error in this category is that clang warns if you ask it to
compile C++ code from a file named "foo.c". Further, because we
were running do_cc in a subshell in the condition part of an "if",
the error_exit inside do_compiler wouldn't terminate configure and
we would plunge on regardless. Fix this complex of errors:
1. Move the default-werror code up so that there are no invocations
of compile_object and friends between it and the point where we
set $werror explicitly based on the --enable-werror command line
option.
2. Provide a mechanism for filtering QEMU_CFLAGS to create
QEMU_CXXFLAGS, and use it for the test we run here.
3. Provide a do_cxx function to run a test with the C++ compiler
rather than doing cute tricks with subshells and do_cc.
4. Use a new temporary file TMPCXX for the C++ program fragment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org
Tested-by: Andreas Färber <afaerber@suse.de>
Using an invalid option for a block device that is opened with
BDRV_O_PROTOCOL led to drv = NULL, and when trying to include the driver
name in the error message, qemu dereferenced it:
$ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar
Segmentation fault (core dumped)
With this patch applied, the expected error message is printed:
$ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar
qemu-system-x86_64: -drive file=/tmp/test.qcow2,file.foo=bar: could
not open disk image /tmp/test.qcow2: Block protocol 'file' doesn't
support the option 'foo'
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
If aio=native, we check that cache.direct is set as well. If however
cache wasn't specified at all, qemu just segfaulted.
The old condition didn't make any sense anyway because it effectively
only checked for the default cache mode case, but not for an explicitly
set cache.direct=off mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Encrypted images need a password before they can be used, and we don't
want blockdev-add to create BDSes that aren't fully initialised. So for
now simply forbid encrypted images; we can come back to it later if we
need the functionality.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The bdrv_create() implementation of the block/raw-win32 "file" protocol
driver should strip the "file:" prefix from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_create() implementation of the block/raw-posix "file" protocol
driver should strip the "file:" prefix from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, bdrv_file_open() always removes the "filename" option from
the options QDict after bdrv_parse_filename() has been (successfully)
called. However, for drivers with bdrv_needs_filename, it makes more
sense for bdrv_parse_filename() to overwrite the "filename" option and
for bdrv_file_open() to fetch the filename from there.
Since there currently are no drivers that implement
bdrv_parse_filename() and have bdrv_needs_filename set, this does not
change current behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Originally, this built up the error message with the backing filename,
so that errp was set as follows:
error_set(errp, QERR_OPEN_FILE_FAILED, backing_filename);
However, we now propagate the local_error from the
bdrv_open_backing_file() call instead, making these 2 lines useless
code.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Moving only the node_name one field could lead to some inconsitencies where a
node_name was defined on a bs which was not registered in the graph node list.
bdrv_swap between a named node bs and a non named node bs would lead to this.
bdrv_make_anon would then crash because it would try to remove the bs from the
graph node list while it is not in it.
This patch remove named node bses from the graph node list before doing the swap
then insert them back.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current iscsi block driver code makes the rather arbitrary decision
that TYPE_MEDIUM_CHANGER and TYPE_TAPE devices have bs->sg = 1 and all
other device types are disks.
Instead of this, check for TYPE_DISK to expose the disk interface and
make everything else bs->sg = 1. In particular, this includes devices
with TYPE_STORAGE_ARRAY, which is what LUN 0 of an iscsi target is.
(See https://bugzilla.redhat.com/show_bug.cgi?id=1067784 for the exact
scenario.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Initialise progress output only when the -p and -q options have already
been parsed, otherwise it's always disabled.
Reported-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Remove the definitions of GLUSTER_FD_WRITE and GLUSTER_FD_READ which are
no longer used. Also sockets.h isn't needed any more.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pipe handling mechanism in gluster driver was based on similar implementation
in RBD driver and hence had GPLv2 and associated copyright information.
After changing gluster driver to coroutine based implementation, the pipe
handling code no longer exists and hence change gluster driver's licence to
GPLv2+ and remove RBD copyrights.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This removes the last user of the lecagy input mouse handler list,
so we can remove more legacy bits with this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
legacy mouse event handlers are registered in the new core,
so they receive events submitted to the new input core.
legacy kbd_mouse_event() continues to use the old code paths.
So new-core event handlers wouldn't see events submitted via
kbd_mouse_event.
This leads to the constrain that we we must transition all
kbd_mouse_event() users first to keep things working. But
that is easier to handle than translating legacy mouse events
into new-core mouse events ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Transform absolute mouse events according to graphic_rotate.
Legacy input code does it for both absolute and relative events,
but the logic is broken for relative coordinates, so this is
most likely not used anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Likewise a bunch of helper functions to manage mouse button
and movement events, again to make life easier for the ui code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
legacy kbd event handlers are registered in the new core,
so they receive events from the new input core code.
keycode -> scancode translation needed here.
legacy kbd_put_keycode() sends events to the new core.
scancode -> keycode translation needed here.
So with this patch the new input core is fully functional
for keyboard events. New + legacy interfaces can be mixed
in any way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A bunch of helper functions to manage keyboard events,
to make life simpler for the ui code when submitting
keyboard events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Define input event types, using qapi. So we get nicely autogenerated
types for our input events. And when it comes to qmp support some day
things will be a lot easier.
Types are modeled after the linux input layer. There are separate
event types for each value. There is a sync to indicate the end
of a event group.
Mouse events are split into motion events (one for each axis) and
button events, which are grouped by sync.
Keyboard events are using the existing KeyValue type.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts
on guest request. When active, host->guest notifications will be handled
via global_indicator -> queue indicators instead of queue indicators +
subchannel I/O interrupt. Indicators for virtqueues may be present at an
offset.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This makes use of @cpu_dt_id and related API in:
1. emulated XICS hypercall handlers as they receive fixed CPU indexes;
2. XICS-KVM to enable in-kernel XICS on right CPU;
3. device-tree renderer.
This removes @cpu_index fixup as @cpu_dt_id is used instead so QEMU monitor
can accept command-line CPU indexes again.
This changes kvm_arch_vcpu_id() to use ppc_get_vcpu_dt_id() as at the moment
KVM CPU id and device tree ID are calculated using the same algorithm.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Normally CPUState::cpu_index is used to pick the right CPU for various
operations. However default consecutive numbering does not always work
for POWERPC.
These indexes are reflected in /proc/device-tree/cpus/PowerPC,POWER7@XX
and used to call KVM VCPU's ioctls. In order to achieve this,
kvmppc_fixup_cpu() was introduced. Roughly speaking, it multiplies
cpu_index by the number of threads per core.
This approach has disadvantages such as:
1. NUMA configuration stays broken after the fixup;
2. CPU-targeted commands from the QEMU Monitor do not work properly as
CPU indexes have been fixed and there is no clear way for the user to
know what the new CPU indexes are.
This introduces a @cpu_dt_id field in the CPUPPCState struct which
is initialized from @cpu_index by default and can be fixed later
to meet the device tree requirements.
This adds an API to handle @cpu_dt_id.
This removes kvmppc_fixup_cpu() as it is not more needed, @cpu_dt_id
is calculated in ppc_cpu_realize().
This will be used later in machine code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch introduces the hypervisor call H_GET_TCE which is basically the
reverse of H_PUT_TCE, as defined in the Power Architecture Platform
Requirements (PAPR).
The hcall H_GET_TCE is required by the kdump kernel which is calling it to
retrieve the TCE set up by the panicing kernel.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This support updating htab managed by the hypervisor. Currently we don't have
any user for this feature. This actually bring the store_hpte interface
in-line with the load_hpte one. We may want to use this when we want to
emulate henter hcall in qemu for HV kvm.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ folded fix for the "warn_unused_result" build break in
kvmppc_hash64_write_pte(), Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
With kvm enabled, we store the hash page table information in the hypervisor.
Use ioctl to read the htab contents. Without this we get the below error when
trying to read the guest address
(gdb) x/10 do_fork
0xc000000000098660 <do_fork>: Cannot access memory at address 0xc000000000098660
(gdb)
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ fixes for 32 bit build (casts!), ldq_phys() API change,
Greg Kurz <gkurz@linux.vnet.ibm.com ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Correctly update the htab_mask using the return value of
KVM_PPC_ALLOCATE_HTAB ioctl. Also we don't update sdr1
on GET_SREGS for HV. We check for external htab and if
found true, we don't need to update sdr1
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ fixed pte group offset computation in ppc_hash64_htab_lookup() that
caused TCG to fail, Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Per Alex Graf's suggestion, the recently added case to gen_conditional_store
for stqcx should use an additional temporary when accessing the second
doubleword. This avoids the mutation of the EA argument to the function,
which is counter intuitive.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch fixes 64 bit constants that were erroneously declared as "ul" instead of
"ull". The preferred form "ULL" is used.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We currently size the msi window trap page according to the host's page
size so that we poke a working hole into a memory slot in case we overlap.
However, this is only ever necessary with KVM active. Without KVM, we should
rather try to be host platform agnostic and use a constant size: 4k.
This fixes a build breakage on win32 hosts.
Signed-off-by: Alexander Graf <agraf@suse.de>
64 bit constants need the "ULL" suffix, not just "UL", because
on 32 bit platforms 'long' is not large enough and this will
cause a compiler warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
When the guests adds buffers to receive queue, the network device
should flush its queue of pending packets. This is done with
qemu_flush_queued_packets.
This adds a call to qemu_flush_queued_packets() which wakes up the main
loop and let QEMU update the network device status which now is "can
receive". The patch basically does the same thing as e8b4c68 does.
Suggested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Permuate and Exclusive OR (vpermxor)
instruction introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector SHA Sigma instructions introduced in Power
ISA Version 2.07:
- Vector SHA-512 Sigma Doubleword (vshasigmad)
- Vector SHA-256 Sigma Word (vshasigmaw)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector AES instructions introduced in Power ISA
Version 2.07:
- Vector AES Cipher (vcipher)
- Vector AES Cipher Last (vcipherlast)
- Vector AES Inverse Cipher (vncipher)
- Vector AES Inverse Cipher Last (vncipherlast)
- Vector AES SubBytes (vsbox)
Note that the implementation of vncipher deviates from the RTL in
ISA V2.07. However it does match the verbal description in the
third paragraph. The RTL will be fixed in ISA V2.07B. The
implementation here has been tested against actual P8 hardware.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch add the Binary Coded Decimal instructions bcdadd. and
bcdsub.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vectory Polynomial Multiply Sum instructions
introduced in Power ISA Version 2.07:
- Vectory Polynomial Multiply Sum Byte (vpmsumb)
- Vectory Polynomial Multiply Sum Halfword (vpmsumh)
- Vectory Polynomial Multiply Sum Word (vpmsumw)
- Vectory Polynomial Multiply Sum Doubleword (vpmsumd)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Gather Bits by Bytes Doubleword (vgbbd)
instruction which is introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Compare Doubleword instructions introduced
by Power ISA Version 2.07:
- Vector Compare Equal to Unsigned Doubleword (vcmpequd)
- Vector Compare Greater Than Signed Doubleword (vcmpgtsd)
- Vector Compare Greater Than Unsigned Doubleword (vcmpgtud)
These instructions are encoded with bit 31 set to 1 and so are duals with
vcmpeqfp, vcmpgtfp and vcmpbfp respectively.
The helper macro for integer compares is enhanced to account for 64-bit
operands.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Bit Permute Quadword (vbpermq) instruction
introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the vector doublword rotate and shift instructions
introduced in Power ISA Version 2.07:
- Vector Rotate Left Doubleword instruction (vrld)
- Vector Shift Left Doubleword (vsld)
- Vector Shift Right Doubleword (vsrd)
- Vector Shift Right Algegbraic Doubleword (vsrad)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Existing code in the VROTATE, VSL and VSR macros for the Altivec rotate and shift
helpers uses a formula to compute a bit mask used to extract the rotate/shift
amount from the VRB register. What is desired is:
mask = (1 << (3 + log2(sizeof(element)))) - 1
but what is implemented is:
mask = (1 << (3 + (sizeof(element)/2))) - 1
This produces correct answers when "element" is uint8_t, uint16_t or uint_32t. But
it breaks down when element is uint64_t.
This patch corrects the situation. Since the mask is known at compile time, the
macros are changed to simply accept the mask as an argument.
Subsequent patches in this series will add double-word variants of rotates and
shifts and thus take advantage of this fix.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Merge Even Word (vmrgew) and Vector
Merge Odd Word (vmrgow) instructions introduced in Power ISA
Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Unpack Signed Word instructions introduced in
Power ISA Version 2.07:
- Vector Unpack High Signed Word (vupkusw)
- Vector Unpack Low Signed Word (vupklsw)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Pack Doubleword instructions introduced in
Power ISA Version 2.07:
- Vector Pack Signed Doubleword Signed Saturate (vpksdss)
- Vector Pack Signed Doubleword Unsigned Saturate (vpksdus)
- Vector Pack Unsigned Doubleword Unsigned Modulo (vpkudum)
- Vector Pack Unsigned Doubleword Unsigned Saturate (vpkudus)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Minimum and Maximum Doubleword instructions
that are introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Population Count instructions introduced in Power
ISA Version 2.07: vpopcntb, vpopcnth, vpopcntw and vpopcntd.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Count Leading Zeroes instructions introduced
in Power ISA Version 2.07 - vclzb, vclzh, vclzw and vclzd.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Multiply Unsigned Word Modulo (vmuluwm)
instruction.
The existing VARITH_DO macro is re-used to (trivially) instantiate
the helper code.
Since bits 21-31 of any vmuluwm instruction is 137, the instruction
is coded as a dual to vmulouw (bits 21-31 = 136).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Multilpy Even/Odd Word instructions that are introduced
in Power ISA Version 2.07:
- Vector Multiply Even Unsigned Word (vmuleuw)
- Vector Multiply Even Signed Word (vmulesw)
- Vector Multiply Odd Unsigned Word (vmulouw)
- Vector Multiply Odd Signed Word (vmulosw)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This VMUL_DO macro provides support for the various vmule* and vmulo*
instructions. These instructions multiply vector elements, producing
products that are one size larger; e.g. vmuleub multiplies unsigned 8-bit
elements and produces a 16 bit unsigned element.
The existing macro works correctly for the existing instructions (8-bit,
and 16-bit source elements) but does not work correctly for 32-bit
source elements.
This patch adds an explicit cast to the multiplicands, forcing them to be
of the target element type. This is required for the forthcoming patches
that add the vmul[eo][us]w instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds two Altivec unsigned doublword modulo instructions that
are introduced in Power ISA Version V2.07:
- vaddudm : Vector Add Unsigned Doubleword Modulo
- vsubudm : Vector Subtrace Unsigned Doubleword Modulo
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Logical Instructions that are introduced
in Power ISA Version 2.07: veqv, vnand and vorc.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some Alitvec instructions introduced in Power ISA Version 2.07 use bit 31
(aka the "Rc" bit) as an opcode but also use bit 21 as an actual Rc
bit. QEMU for PowerPC typically uses bits 0-5 and 21-30 for opcodes.
This patch introduces a generator macro that injects an auxiliary handler
which decodes both bits 21 and 31 and invokes one of four standard
handlers. Since the instructions are not, in general, from the same version
of the ISA, two sets of PPC_*/PPC2_* flags are supported.
This patch also introduces a macro to insert two entries into the opcode
table -- one for bit 21 equal to 0 and one for bit 21 equal to 1.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a macro to insert an entry into the opcode table for Altivec
Power ISA Version 2.07 instructions. The macro is similar to the GEN_VXFORM macro
except that it tags the entry with the PPC2_ALTIVEC_207 flag rather than
PPC_ALTIVEC.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some Alitvec instructions introduced in Power ISA Version 2.07 use bit 31
(aka the "Rc" bit) as an opcode bit. However, QEMU for PowerPC uses
bits 0-5 and 21-30 for opcodes and not bit 31.
This patch introduces macros that will handle this situation by injecting
an auxiliary handler which decodes bit 31 in invokes one of two standard
handlers. Since the instructions are not, in general, from the same version
of the ISA, two sets of PPC_*/PPC2_* instruction tags are supported.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds generator macro for Altivec instructions that have 3
source AVR operands. The macro is similar to the 2 operand form.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch updates the ppc_avr_t data structure to include elements for
signed 64-bit integers and (conditionally) unsigned 128 bit integers.
These elements will be in instructions models later on in this patch series.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag that will be used to tag the Altivec instructions
introduced in Power ISA Version 2.07.
The flag is added to Power8 model since P8 supports these instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store Quadword Conditionl (stqcx.) instruction
which is introduced in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix compile error when !TARGET_PPC64]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load Quadword and Reserve (lqarx) instruction,
which is new in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for the Store Quadword instruction in user mode. Prior
to Power ISA 2.07, stq was legal only in privileged mode. Support for Little
Endian mode is also new in ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Book I (user space) Load Quadword (lq) instruction.
This instruction was introduced into Book I in Power ISA V2.07. Previous
versions of the architecture supported this as a privileged instruction.
Previous versions of the architecture also did not support Little Endian
mode.
Note that this patch also adds the PPC_64BX flag to the Power8 model,
which enables the lq instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a boolean function is_user_mode that can be re-used
in translation code that is sensitive to the MSR[PR] (user-mode)
state.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag to identify the load/store quadword instructions
that are introduced with Power ISA 2.07.
The flag is added to the Power8 model since P8 supports these
instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Branch Conditional to Address Register (bctar)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for the Target Address Register (TAR) to the Power8
model.
Because supported SPRs are typically identified in an init_proc_*()
function and because the Power8 model is currently just using the
init_proc_POWER7() function, a new init_proc_POWER8() function
is added and plugged into the P8 model.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag for the bctar instruction. This instruction
is being introduced via Power ISA 2.07.
Also, the flag is added to the Power8 machine model since the P8
processor supports this instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The existing implementation of xxpermdi is defective if the target
VSR is also a source VSR. This patch fixes the defect in this case
but also preserves the simpler, two TCG operation implementation
when the target is not once of the two sources.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When we have 2 separate qdev devices that both create a qbus of the
same type without specifying a bus name or device name, we end up
with two buses of the same name, such as ide.0 on the Mac machines:
dev: macio-ide, id ""
bus: ide.0
type IDE
dev: macio-ide, id ""
bus: ide.0
type IDE
If we now spawn a device that connects to a ide.0 the last created
bus gets the device, with the first created bus inaccessible to the
command line.
After some discussion on IRC we concluded that the best quick fix way
forward for this is to make automated bus-class type based allocation
count a global counter. That's what this patch implements. With this
we instead get
dev: macio-ide, id ""
bus: ide.1
type IDE
dev: macio-ide, id ""
bus: ide.0
type IDE
on the example mentioned above.
This also means that if you did -device ...,bus=ide.0 you got a device
on the first bus (the last created one) before this patch and get that
device on the second one (the first created one) now. Breaks
migration unless you change bus=ide.0 to bus=ide.1 on the destination.
This is intended and makes the bus enumeration work as expected.
As per review request follows a list of otherwise affected boards and
the reasoning for the conclusion that they are ok:
target machine bus id times
------ ------- ------ -----
aarch64 n800 i2c-bus.0 2
aarch64 n810 i2c-bus.0 2
arm n800 i2c-bus.0 2
arm n810 i2c-bus.0 2
-> Devices are only created explicitly on one of the two buses, using
s->mpu->i2c[0], so no change to the guest.
aarch64 vexpress-a15 virtio-mmio-bus.0 4
aarch64 vexpress-a9 virtio-mmio-bus.0 4
aarch64 virt virtio-mmio-bus.0 32
arm vexpress-a15 virtio-mmio-bus.0 4
arm vexpress-a9 virtio-mmio-bus.0 4
arm virt virtio-mmio-bus.0 32
-> Makes -device bus= work for all virtio-mmio buses. Breaks
migration. Workaround for migration from old to new: specify
virtio-mmio-bus.4 or .32 respectively rather than .0 on the
destination.
aarch64 xilinx-zynq-a9 usb-bus.0 2
arm xilinx-zynq-a9 usb-bus.0 2
mips64el fulong2e usb-bus.0 2
-> Normal USB operation not affected. Migration driver needs command
line to use the other bus.
i386 isapc ide.0 2
x86_64 isapc ide.0 2
mips mips ide.0 2
mips64 mips ide.0 2
mips64el mips ide.0 2
mipsel mips ide.0 2
ppc g3beige ide.0 2
ppc mac99 ide.0 2
ppc prep ide.0 2
ppc64 g3beige ide.0 2
ppc64 mac99 ide.0 2
ppc64 prep ide.0 2
-> Makes -device bus= work for all IDE buses. Breaks migration.
Workaround for migration from old to new: specify ide.1 rather than
ide.0 on the destination.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
We will use this in later patches to make sure we use the right load
functions when copying hpte entries.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This makes use of new error codes which load_elf() can return and
prints more informative error message.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The existing load_elf() just returns -1 if it fails to load ELF. However
it could be smarter than this and tell more about the failure such as
wrong endianness or incompatible platform.
This adds additional return codes for wrong architecture, wrong
endianness and if the image is not ELF at all.
This adds a load_elf_strerror() helper to convert return codes into
string messages.
This fixes handling of what load_elf() returns for s390x, other
callers just check the return value for <0 and this remains unchanged.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment in the case of error, load_elf() returns -1 so load_kernel()
will not signal error at all.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently everybody uses ELF kernel images with "-kernel" option on
pseries machine but QEMU still tries to boot from an image even it
fails to recognize it is ELF. This produces undefined behaviour if
the user tries a kernel image compiled for another architecture.
This removes support of raw kernel images.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This implementation doesn't include ring priority, TCP/IP Off-Load, QoS.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
PR KVM lacks support of many SPRs in set/get one register API but it does
really break PR KVM. So convert them to switchable traces for now.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[agraf: fix up stray quotes and newlines in strings]
Signed-off-by: Alexander Graf <agraf@suse.de>
When ppc_store_slb() is called from kvm_arch_get_registers(), it stores
a SLB in CPUPPCState::slb[slot]. However it drops the slot number from
ESID so when kvm_arch_put_registers() puts SLBs back to KVM, they do not
have correct "index" field anymore. This broke migration with LPCR_AIR
enabled as now the guest is handling interrupts in virtual mode and unable
to reconstruct correct SLBs anymore.
This adds "index" field for valid SLBs when putting them to KVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load Floating Point as Integer Word and
Zero Indexed (lfiwzx) instruction which was introduced in
Power ISA 2.06.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The frsqrtes instruction was introduced prior to ISA 2.06 and is
support on both the Power7 and Power8 processors. However, this
instruction is handled as illegal in the current QEMU emulation
machines. This patch enables the existing implemention of frsqrtes
in the P7 and P8 machines.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Floating Point Test for Square Root instruction
which was introduced in Power ISA 2.06.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Floating Point Test for Divide instruction which
was introduced in Power ISA 2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag for Floating Point Test instructions that were
introduced in Power ISA V2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The fri* series of instructions was introduced prior to ISA 2.06 and
is supported on Power7 and Power8 hardware. However, the instruction
is still considered illegal in the P7 and P8 QEMU emulation models.
This patch enables these instructions for the P7 and P8 machines.
Also, the existing helper is modified to correctly handle some of
the boundary cases (NaNs and the inexact flag).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the fcfids, fcfidu and fcfidus instructions which
were introduced in Power ISA 2.06B. A common macro is provided to
eliminate repetitious code, and the existing fcfid instruction is
refactored to use this macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the four floating point to integer conversion instructions
introduced by Power ISA V2.06:
- Floating Convert to Integer Word Unsigned (fctiwu)
- Floating Convert to Integer Word Unsigned with Round Toward
Zero (fctiwuz)
- Floating Convert to Integer Doubleword Unsigned (fctidu)
- Floating Convert to Integer Doubleword Unsigned with Round
Toward Zero (fctiduz)
A common macro is developed to eliminate repetitious code. Existing instructions
are also refactoried to use this macro (fctiw, fctiwz, fctid, fctidz).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag for the floating point conversion instructions
introduced in Power ISA 2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the byte and halfword variants of the Store Conditional
instructions. A common macro is introduced and the existing implementations
of stwcx. and stdcx. are refactored to use this macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the byte and halfword variants of the Load and
Reserve instructions. Since there is much commonality among
all forms of Load and Reserve, a macro is provided and the existing
implementations of lwarx and ldarx are refactoried to use this
macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag for the atomic instructions introduced
in Power ISA V2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch addes the signed Divide Word Extended instructions
which were introduced in Power ISA 2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch addes the Unsigned Divide Word Extended instructions
which were introduced in Power ISA 2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Divide Doubleword Extended instructions.
The implementation builds on the unsigned helper provided in
the previous patch.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Divide Doubleword Extended Unsigned
instructions. This instruction requires dividing a 128-bit
value by a 64 bit value. Since 128 bit integer division is
not supported in TCG, a helper is used. An architecture
independent 128-bit division routine is added to host-utils.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[agraf: use ||]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag for the Divide Extended instructions that
were introduced in Power ISA V2.06B. The flag is added to the
Power7 and Power8 models.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Bit Permute Doubleword (bpermd) instruction,
which was introduced in Power ISA 2.06 as part of the base 64-bit
architecture.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the non-signalling scalar conversion instructions:
- VSX Scalar Convert Single Precision to Double Precision
Non-Signalling (xscvspdpn)
- VSX Scalar Convert Double Precision to Single Precision
Non-Signalling (xscvdpspn)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Round to Single Precision (xsrsp)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Floating Merge Even Word (fmrgew) and Floating
Merge Odd Word (fmrgow) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Move To VSR instructions (mfvsrd, mfvsrwz)
and Move From VSR instructions (mtvsrd, mtvsrwa, mtvsrwz). These
instructions are unusual in that they are considered a floating
point instruction if the indexed VSR is in the first half of the
array (0-31) but they are considered vector instructions if the
indexed VSR is in the second half of the array (32-63).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patchs adds the VSX Logical instructions that are new with
ISA V2.07:
- VSX Logical Equivalence (xxleqv)
- VSX Logical NAND (xxlnand)
- VSX Logical ORC (xxlorc)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Convert Unsigned Integer Doubleword
to Floating Point Format and Round to Single Precision (xscvuxdsp)
and VSX Scalar Convert Signed Integer Douglbeword to Floating Point
Format and Round to Single Precision (xscvsxdsp) instructions.
The existing integer to floating point conversion macro (VSX_CVT_INT_TO_FP)
is modified to support the rounding of the intermediate floating point
result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Single Precision VSX Scalar Fused Multiply-Add
instructions: xsmaddasp, xsmaddmsp, xssubasp, xssubmsp, xsnmaddasp,
xsnmaddmsp, xsnmsubasp, xsnmsubmsp.
The existing VSX_MADD() macro is modified to support rounding of the
intermediate double precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Reciprocal Square Root Estimate
Single Precision (xsrsqrtesp) instruction.
The existing VSX_RSQRTE() macro is modified to support rounding
of the intermediate double-precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Square Root Single Precision (xssqrtsp)
instruction.
The existing VSX_SQRT() macro is modified to support rounding of the
intermediate double-precision result to single-precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Reciprocal Estimate Single Precision
(xsresp) instruction.
The existing VSX_RE macro is modified to support rounding of the
intermediate double precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Divide Single Precision (xsdivsp)
instruction.
The existing VSX_DIV macro is modified to support rounding of the
intermediate double precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Multiply Single-Precision (xsmulsp)
instruction.
The existing VSX_MUL macro is modified to support rounding of the
intermediate result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Add Single-Precision (xsaddsp) and
VSX Scalar Subtract Single-Precision (xssubsp) instructions.
The existing VSX_ADD_SUB macro is modified to support the rounding
of the (intermediate) result to single-precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds two store scalar instructions:
- Store VSX Scalar as Integer Word Indexed (stxsiwx)
- Store VSX Scalar Single-Precision Indexed (stxsspx)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch refactors the stxsdx instruction. Reusable code is
extracted into a macro which will be used in subsequent patches
in this series.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the scalar load instructions introduced in ISA
V2.07:
- Load VSX Scalar as Integer Word Algebraic Indexd (lxsiwax)
- Load VSX Scalar as Integer Word and Zero Indexed (lxsiwzx)
- Load VSX Scalar Single-Precision Indexed (lxsspx)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch refactors the lxsdx generator. Resuable code is isolated
into a macro. The macro will be used in subsequent patches in this
series to implement other scalar load instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag to identify those VSX instructions that are
new to Power ISA V2.07. The flag is added to the Power 8 processor
initialization so that the P8 models understand how to decode and
emulate instructions in this category.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX instructions that convert between floating
point formats: xscvdpsp, xscvspdp, xvcvdpsp, xvcvspdp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point compare vector instructions:
- xvcmpeqdp[.], xvcmpgedp[.], xvcmpgtdp[.]
- xvcmpeqsp[.], xvcmpgesp[.], xvcmpgtsp[.]
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point maximum and minimum
instructions:
- xsmaxdp, xvmaxdp, xvmaxsp
- xsmindp, xvmindp, xvminsp
Because of the Power ISA definitions of maximum and minimum
on various boundary cases, the standard softfloat comparison
routines (e.g. float64_lt) do not work as well as one might
think. Therefore specific routines for comparing 64 and 32
bit floating point numbers are implemented in the PowerPC
helper code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX scalar floating point compare ordered
and unordered instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point test for software square
root instructions defined by V2.06 of the PowerPC ISA: xstsqrtdp,
xvtsqrtdp, xvtsqrtsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point test for software divide
instructions defined by V2.06 of the PowerPC ISA: xstdivdp, xvtdivdp,
and xvtdivsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point reciprocal square root
estimate instructions defined by V2.06 of the PowerPC ISA: xsrsqrtedp,
xvrsqrtedp, xvrsqrtesp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point square root instructions
defined by V2.06 of the PowerPC ISA: xssqrtdp, xvsqrtdp, xvsqrtsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point reciprocal estimate instructions
defined by V2.06 of the PowerPC ISA: xsredp, xvredp, xvresp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point divide instructions defined
by V2.06 of the PowerPC ISA: xsdivdp, xvdivdp, xvdivsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point multiply instructions defined
by V2.06 of the PowerPC ISA: xsmuldp, xvmuldp, xvmulsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the floating point addition and subtraction
instructions defined by V2.06 of the PowerPC ISA: xssubdp,
xvsubdp and xvsubsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds general support that will be used by the VSX helper
routines:
- a union describing the various VSR subfields.
- access routines to get and set VSRs
- VSX decoders
- a general routine to generate a handler that invokes a VSX
helper.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The fload_invalid_op_excp() function sets assorted invalid
operation status bits. However, it also implicitly modifies
the FPRF field of the PowerPC FPSCR. Many VSX instructions
set invalid operation bits but do not alter FPRF. Thus the
function is more generally useful if the setting of the FPRF
field is made conditional via a parameter.
All invocations of this routine in existing instructions are
modified to pass 1 and thus retain their current behavior.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The Figure 17 "SPR encodings" of the PowerISA 2.07 describes CTRL SPR as:
priviledged
# spr5-9 spr0-4 name mtspr mfspr len cat
136 00100 01000 CTRL - no 32 S
152 00100 11000 CTRL yes - 32 S
According to this chart, the hypervisor's CTRL (#152) does not support
reading, the user-space's CTRL (UCTRL, #136) does not support writing.
This replaces unsupported operations with the default SPR_NOACCESS hook.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Intercept REPORT_LUNS commands addressed either to SRP LUN 0 or the well-known
LUN for REPORT_LUNS commands. This is required to implement the SAM and SPC
specifications.
Since SRP implements only a single SCSI target port per connection, the SRP
target is required to report all available LUNs in response to a REPORT_LUNS
command addressed either to LUN 0 or the well-known LUN. Instead, QEMU was
forwarding such requests to the first QEMU SCSI target, with the result that
initiators that relied on this feature would only see LUNs on the first QEMU
SCSI target.
Behavior for REPORT_LUNS commands addressed to any other LUN is not specified
by the standard and so is left unchanged. This preserves behavior under Linux
and SLOF, which enumerate possible LUNs by hand and so address no commands
either to LUN 0 or the well-known REPORT_LUNS LUN.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[agraf: define constant as ULL for 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
Recent changes introduced cannot_instantiate_with_device_add_yet
and removed capability of adding yet another PCI host bridge via
command line for SPAPR platform (POWERPC64 server).
This brings the capability back and puts SPAPR PHB into "bridge"
category.
This is not much use for emulated PHB but it is absolutely required
for VFIO as we put an IOMMU group onto a separate PHB on SPAPR.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The LPCR special purpose register was introduced with the PowerPC 970MP family.
This patch initializes LPCR for the following families:
- 970 MP
- POWER5+
- POWER7
- POWER8
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Due to missing @one_reg_id assignment in _spr_register(),
the kvm_get_one_reg/kvm_set_one_reg API has never really been working.
This reenables the API by assigning the @one_reg_id field in the SPR
descriptor.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
commit f80872e21c (mmu-hash64: Implement
Virtual Page Class Key Protection) added a new page protection
mechanism based on page keys and the AMR register to control access.
The AMR register allows or prohibits reads and/or writes on a page
depending on the control bits associated to the key. A store or a load
is only permitted if the associate bit is 0 (Power ISA), and not 1 as
the code is currently doing. This patch modifies ppc_hash64_amr_prot()
to correct the protection check.
This issue was unvailed by commit ccfb53ed6360cac0d5f6f7915ca9ae7eed866412
(target-ppc: fix Authority Mask Register init value) which changed the
initialisation value of the AMR register to 0.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The existing default value (-1) of the AMR register forbids data access
to all 32 classes. Since the guest linux does not change this register,
we end up with the guest hanging right after switching from the real to
protected mode.
This sets the default AMR value to zero what enables data access for all
classes.
The only reason for not hitting this bug before is that
kvm_arch_put_registers() did not put any SPR to KVM due to missing
assignment of @one_reg_id in _spr_register() (which is going to be fixed
by a separate patch).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The DAR and DSISR can be very useful when debugging issues, so add
them to ppc_cpu_dump_state. We had another bug in this area: all
of the v2.06 MMU types were missing.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Targets like ppc64 support different types of KVM, one which use
hypervisor mode and the other which doesn't. Add a new machine
option kvm-type that helps in selecting the respective ones
We also add a new QEMUMachine callback get_vm_type that helps
in mapping the string representation of kvm type specified.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[agraf: spelling fixes, use error_report(), use qemumachine.h]
Signed-off-by: Alexander Graf <agraf@suse.de>
Older gcc versions (such as the one in SLES11) get confused when you declare
a typedef on the same struct twice.
To work around that limitation, let's extract the QEMUMachine typedef into a
separate header file that is guarded by preprocessor duplicate include checks.
This fixes the following type of compile errors for me:
In file included from vl.c:125:
include/hw/xen/xen.h:39: error: redefinition of typedef "QEMUMachine"
include/sysemu/kvm.h:155: error: previous declaration of "QEMUMachine" was here
Signed-off-by: Alexander Graf <agraf@suse.de>
SPR_750FX_HID2 and L2CR are not defined in 970* user manuals nor POWER5
bookIV nor PowerISA 2.04, the numbers assigned to them are not defined
either so remove them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PowerISA 2.04+ puts MMUCFG and MMUCSR0 SPRs to "E" (embedded) category so
remove it from POWER7/8 class as it is "S" (server) category.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Assuming that "U" in SPR_UCTRL is for "user", there is inconsistency with
970 user manuals/P5-bookIV/PowerISA204 which define the number as:
priviledged
# spr5-9 spr0-4 name mtspr mfspr len cat
136 00100 01000 CTRL - no 32 S
152 00100 11000 CTRL yes - 32 S
This swaps the numbers. No effect from this change is expected though.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The 970GX definition was added in 2007 and it made sense then but this
version has never been released to the markets and it does not exist in
the real world so there is no point in emulating it.
This removes 970GX.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PowerISA defines LPCR SPR number as 318=0x13E but QEMU uses the value of
316.
This fixes the definition of LPCR SPR.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since last use of PPC_DUMP_CPU by whoever he/she was, env->tlb became
a union and POWERPC CPU class got QOM'ed so defining PPC_DUMP_CPU
breaks compile.
This fixes compiler errors.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit adccfbcd60 (block: gluster - add
reopen support.) did not supply the qemu_gluster_init() Error **
argument, needed since commit a7451cb850
(gluster: correctly propagate errors).
Pass through qemu_gluster_reopen_prepare()'s errp, as done in
qemu_gluster_open().
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
trivial patches for 2014-03-04
# gpg: Signature made Tue 04 Mar 2014 06:13:56 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838
* remotes/mjt/tags/trivial-patches-2014-03-04:
vl: Remove unneeded include file
qga: Remove unneeded include file
qemu-img: Remove unneeded include files
exec: Remove unneeded include files
util/iov: Use qemu/sockets.h instead of conditional code
qjson.h: Remove spurious GCC_FMT_ATTR markup from qobject_from_json() declaration
tests/test-int128: Don't use __noclone__ attribute on clang
stubs: Optimize dependencies for gdbstub.c
tcg: Fix typo in comment (dependancies -> dependencies)
bswap: Modify prototypes of st[wl]_{le, be}_p (avoid type conversions)
bswap: Modify prototype of stb_p (avoid type conversions)
object: Report type in error when not user creatable.
include/qemu/host-utils.h: Trivial typo: ctz->cto
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/qmp-unstable/queue/qmp: (32 commits)
qapi: Add missing null check to opts_start_struct()
qapi: Clean up superfluous null check in qapi_dealloc_type_str()
qapi: Clean up null checking in generated visitors
qapi: Drop unused code in qapi-commands.py
qapi: Drop nonsensical header guard in generated qapi-visit.c
qapi: Fix licensing of scripts
tests/qapi-schema: Cover flat union types
tests/qapi-schema: Cover union types with base
tests/qapi-schema: Cover complex types with base
tests/qapi-schema: Cover anonymous union types
tests/qapi-schema: Cover simple argument types
tests/qapi-schema: Cover optional command arguments
tests/qapi-schema: Actually check successful QMP command response
monitor: Remove left-over code in do_info_profile.
qerror: Improve QERR_DEVICE_NOT_ACTIVE message
qmp: Check for returned data from __json_read in get_events
dump: add 'query-dump-guest-memory-capability' command
Define the architecture for compressed dump format
dump: make kdump-compressed format available for 'dump-guest-memory'
dump: add API to write dump pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block pull request
# gpg: Signature made Fri 28 Feb 2014 18:27:24 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
block/vmdk: do not report file offset for compressed extents
discard rbd error output when not relevant in qemu-iotests
block: use /var/tmp instead of /tmp for -snapshot
qemu-io-test: Disable Quorum test when not compiled in.
qmp: Make Quorum error events more palatable.
qmp: Fix BlockdevOptionQuorum.
block: gluster - add reopen support.
block: gluster - code movements, state storage changes
qemu-iotests: add more tests to the "quick" group
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/rth/i386-fix:
target-i386: Fix ucomis and comis memory access
target-i386: Fix SSE status flag corruption
target-i386: Fix CC_OP_CLR vs PF
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several features, fixes and cleanups for kvm/s390:
- sclp event facility: cleanup structure. This allows to use
realize/unrealize as well as migration support via vmsd
- reboot: Two fixes that make reboot much more reliable
- ipl: make elf loading more robust
- flic interrupt controller: This allows to migrate floating
interrupts, as well as clear them on reset etc.
- enable async_pf feature of KVM on s390
- several sclp fixes and cleanups
- several sigp fixes and cleanups
* remotes/borntraeger/tags/kvm-s390-20140227: (22 commits)
s390x/ipl: Fix crash of ELF images with arbitrary entry points
s390x/kvm: Rework priv instruction handlers
s390x/kvm: Add missing SIGP CPU RESET order
s390x/kvm: Rework SIGP INITIAL CPU RESET handler
s390x/cpu: Use ioctl to reset state in the kernel
s390-ccw.img: new binary rom to match latest fixes
s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css
s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx
s390x/event-facility: exploit realize/unrealize
s390x/event-facility: add support for live migration
s390x/event-facility: code restructure
s390x/event-facility: some renaming
s390x/sclp: Fixed setting of condition code register
s390x/sclp: Add missing checks to SCLP handler
s390x/sclp: Fixed the size of sccb and code parameter
s390x/eventfacility: mask out commands
s390x/virtio-hcall: Specification exception for illegal subcodes
s390x/virtio-hcall: Add range check for hypervisor call
s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler
s390x/async_pf: Check for apf extension and enable pfault
...
Conflicts:
linux-headers/linux/kvm.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/scsi-next:
block/iscsi: fix segfault if writesame fails
scsi-disk: Add support for port WWN and index descriptors in VPD page 83h
block/iscsi: query for supported VPD pages
block/iscsi: fix deadlock on scsi check condition
scsi-bus: Fix transfer length for VERIFY with BYTCHK=11b
scsi: report thin provisioning errors with werror=report
scsi: Change scsi sense buf size to 252
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/mcayland/qemu-sparc:
sun4m: Add Sun CG3 framebuffer initialisation function
sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM
sun4m: fix slavio timer RUN/STOP bit
sun4m: Set HostID in NVRAM
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Comment from Makefile.objs:
The system emulation needs this dependency (which was missing in Makefile),
otherwise builds without tools (or massive parallel builds) fail.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After commit ba1183da9a we are including
hw/Makefile.objs directly from Makefile.target. Make sure hw/Makefile.objs
rules doesn't depend on variable defined in Makefile.objs
Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Exception with break instruction has not been correctly propagated as
SIGTRAP. This resolves crash issues with examples that use break
instruction on MIPS.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On success, sigtimedwait() returns a signal number that needs to be
translated from a host value to a target value.
This change also fixes issues with sigwait (that is implemented using
sigtimedwait()).
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Glibc when built for newer kernels assumes that the sendmmsg syscall is
available. Without it, dns resolution simply fails to work.
Wrap the syscall with existing infrastructure so that we don't have a host
dependency on sendmmsg.
To avoid locking the same area of guest memory twice (which will break if
DEBUG_REMAP is defined) we pull the lock/unlock part of do_sendrecvmsg()
out into its own function so the actual implementation can be shared.
Signed-off-by: Alexander Graf <agraf@suse.de>
[PMM: add recvmmsg support;
handle errors (which also implies support for non-blocking operations);
cap the vector length as the kernel implementation does;
don't lock guest memory twice;
support MSG_WAITFORONE flag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The size of the UID/GID types depends on whether USE_UID16 is
defined. Define a new put_user_id() which writes a uid/gid
type to guest memory. This fixes getresuid and getresgid, which
were always storing 16 bits even if the uid type was 32 bits.
Reported-by: Michael Matz <matz@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The AArch64 kernel defines its __kernel_uid_t type as 32 bits, unlike
32 bit ARM, so don't enable our 16-bit UID wrapper handling.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement support for signal handlers with the SA_RESTORER
flag set.
Signed-off-by: Michael Matz <matz@suse.de>
[PMM: minor tweaks to make patch apply to current master]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Fix the loop restoring the FP registers from the signal frame to match
the one used when setting up the signal frame, so that it handles
TARGET_WORDS_BIGENDIAN being set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When path is truncated by PATH_MAX limitation, it causes QEMU to access
incorrect file. So use original full path instead of PATH_MAX within
9pfs (need check/process ENOMEM for related memory allocation).
The related test:
- Environments (for qemu-devel):
- Host is under fedora17 desktop with ext4fs:
qemu-system-x86_64 -hda test.img -m 1024 \
-net nic,vlan=4,model=virtio,macaddr=00:16:35:AF:94:04 \
-net tap,vlan=4,ifname=tap4,script=no,downscript=no \
-device virtio-9p-pci,id=fs0,fsdev=fsdev0,mount_tag=hostshare \
-fsdev local,security_model=passthrough,id=fsdev0,\
path=/upstream/vm/data/share/1234567890abcdefghijklmnopqrstuvwxyz\
ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890acdefghijklmnopqrstuvwxyz\
ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890/111111111111111111111111111\
1111111111111111111111111111111111111111111111111111222222222222\
2222222222222222222222222222222222222222222222222222222222222222\
2222222222222222222222222222222222233333333333333333333333333333\
3333333333333333333333333333333333
- Guest is ubuntu12 server with 9pfs.
mount -t 9p -o trans=virtio,version=9p2000.L hostshare /share
- Limitations:
full path limitation is PATH_MAX (4096B include nul) under Linux.
file/dir node name maximized length is 256 (include nul) under ext4.
- Special test:
Under host, modify the file: "/upstream/vm/data/share/1234567890abcdefg\
hijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890acdefghijklmno\
pqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890/111111111111111111111\
111111111111111111111111111111111111111111111111111111111122222222222\
222222222222222222222222222222222222222222222222222222222222222222222\
222222222222222222222222222222233333333333333333333333333333333333333\
3333333333333333333333333/4444444444444444444444444444444444444444444\
444444444444444444444444444444444444444444444444444444444444444444444\
444444444444444444444444444444444444444444444444444444444444444444444\
444444444444444444444444444444444444444/55555555555555555555555555555\
555555555555555555555555555555555555555555555555555555555555555555555\
555555555555555555555555555555555555555555555555555555555555555555555\
555555555555555555555555555555555555555555555555555555555555555555555\
55555555/666666666666666666666666666666666666666666666666666666666666\
666666666666666666666666666666666666666666666666666666666666666666666\
666666666666666666666666666666666666666666666666666666666666666666666\
666666666666666666666/77777777777777777777777777777777777777777777777\
777777777777777777777777777777777777777777777777777777777777777777777\
777777777777777777777777777777777777777777777777777777777777777777777\
77777777777777777777777777777777777777777777777777777777777/888888888\
888888888888888888888888888888888888888888888888888888888888888888888\
888888888888888888888888888888888888888888888888888888888888888888888\
888888888888888888888888888888888888888888888888888888888888888888888\
888888888/99999999999999999999999999999999999999999999999999999999999\
999999999999999999999999999999999999999999999999999999999999999999999\
999999999999999999999999999999999999999999999999999999999999999999999\
99999999999999999999999999999999999999999/000000000000000000000000000\
000000000000000000000000000000000000000000000000000000000000000000000\
000000000000000000000000000000000000000000000000000000000000000000000\
000000000000000000000000000000000000000000000000/aaaaaaaaaaaaaaaaaaaa\
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbb\
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb\
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb\
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ccccccccc\
ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc\
ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc\
ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc\
cccccccccc/dddddddddddddddddddddddddddddddddddddddddddddddddddddddddd\
ddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd\
ddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd\
dddddddddddddddddddddd/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee\
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee\
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee\
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee/fffffffffffffff\
fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff\
fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff\
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffff/gggggggggg\
ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg\
ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg\
ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg\
ggggggggggggggggggggggg/iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii\
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii\
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii\
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii/jjjjjjjjjjjjj\
jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj\
jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj/ppppppppppppppppppppp\
ppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppp\
ppppppppppppppppppppppppppppppppppppppp/test1234567890file.log"
(need enter dir firstly, then modify file, or can not open it).
Under guest, still allow modify "test1234567890file.log" (will generate
"test123456" file with contents).
After apply this patch, can not open "test1234567890file.log" under guest
(permission denied).
- Common test:
All are still OK after apply this path.
"mkdir -p", "create/open file/dir", "modify file/dir", "rm file/dir".
change various mount point paths under host and/or guest.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
'ctx->fs_root' + 'path'/'fullname.data' may be larger than PATH_MAX, so
need use snprintf() instead of sprintf() just like another area have done
in 9pfs. This could possibly result in the truncation of pathname, which we
address in the follow up patch.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
When "goto err_out", 'v9fs_string' already was allocated, so still need
free 'v9fs_string' before return.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Argument is null when visiting an unboxed struct. I can't see such a
visit in the current code. Fix it anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Argument can't be null. No other Visitor method type_str() checks for
null.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Visitors get passed a pointer to the visited object. The generated
visitors try to cope with this pointer being null in some places, for
instance like this:
visit_start_optional(m, obj ? &(*obj)->has_name : NULL, "name", &err);
visit_start_optional() passes its second argument to Visitor method
start_optional. Three out of three methods dereference it
unconditionally.
I fail to see how this pointer could legitimately be null.
All this useless null checking is highly redundant, which Coverity
duly reports. About 200 times.
Remove the useless null checks.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The scripts carry this copyright notice:
# This work is licensed under the terms of the GNU GPLv2.
# See the COPYING.LIB file in the top-level directory.
The sentences contradict each other, as COPYING.LIB contains the LGPL
2.1. Michael Roth says this was a simple pasto, and he meant to refer
COPYING. Let's fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The test demonstrates a generator bug: the generated struct
UserDefFlatUnion doesn't include members for the indirect base
UserDefZero.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There is no dependency on windows.h, and the standard include files are
already included by qemu-common.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function qobject_from_json() doesn't actually allow its
argument to be a format string -- it passes a NULL va_list*
to qobject_from_jsonv(), and the parser code will then never
actually interpret %-escape sequences (it tests whether the
va_list pointer is NULL and will stop with a parse error).
The spurious attribute markup causes clang warnings in some
of the test cases where we programmatically construct JSON
to feed to qobject_from_json():
tests/test-qmp-input-visitor.c:76:35: warning: format string is not a
string literal (potentially insecure) [-Wformat-security]
data->obj = qobject_from_json(json_string);
^~~~~~~~~~~
Remove the incorrect attribute.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
clang doesn't support the __noclone__ attribute and emits a warning about
it. Fortunately clang also implements a mechanism for asking if a particular
attribute is implemented; use it. We assume that if the compiler doesn't
support __has_attribute() then it must be GCC and must support __noclone__.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It does not need qemu-common.h. Including exec/gdbstub.h fixes a warning
from static code analyzers and avoids mismatching declarations for
xml_builtin.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The functions use uint16_t or uint32_t values, so show this in the function
prototypes. Non-optimizing compilers will avoid unnecessary type
conversions when generating calls of these inline functions.
stq_le_p, stq_be_p already use similar prototypes.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function uses an uint8_t value, so show this in the function
prototype. Non-optimizing compilers will avoid unnecessary type
conversions from (u)int8_t to int and back to uint8_t when generating
calls of this inline function.
stw_p, stl_p and stq_p already use similar prototypes.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The error message as currently used is confusing as there are no "balloon" or
"spice" devices.
(qemu) balloon 1024
balloon: Device 'balloon' has not been activated
With this patch:
(qemu) balloon 1024
balloon: No balloon device has been activated
Signed-off-by: Hani Benhabiles <hani@linux.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When QEMU process aborts and socket is closed, qmp client will not
detect it. When this happens, some qemu-iotests scripts will enter an
endless loop waiting for qmp events.
It's better we raise an exception in qmp.py to catch this and make the
test script stop.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Suppress rbd progress messages with --no-progress so they are not
confused with an error output when comparing test results ( progress is
displayed on stderr ).
Signed-off-by: Loic Dachary <loic@dachary.org>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If TMPDIR is not specified, the default was to use /tmp for the working
copy of the block devices. Update this to /var/tmp instead, so systems
using tmp-on-tmpfs don't end up inadvertently using RAM for the block
device.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Quorum is not compiled by default: make the quorum 081 test aware of this.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Insert quorum QMP events documentation alphabetically.
Also change the "ret" errno value by an optional "error" being an strerror(-ret)
in the QUORUM_REPORT_BAD qmp event.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gluster does parse open flags in its .bdrv_open() implementation,
and the .bdrv_reopen_* implementations need to do the same.
A new gluster connection to the image file to be created is established
in the .bdrv_reopen_prepare(), and the image file opened with the new
flags.
If this is successful, then the old image file is closed, and the
old connection torn down. The relevant structure pointers in the gluster
state structure are updated to the new connection.
If it is not successful, then the new file handle and connection is
abandoned (if it exists), while the old connection is not modified at
all.
With reopen supported, block-commit (and offline commit) is now also
supported for image files whose base image uses the native gluster
protocol driver.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for supporting reopen on gluster, move flag
parsing out to a function. Also, add a NULL check in the
gconf cleanup.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
None of these needs QEMU_PROG, and they all take but a few seconds.
We need to point the launching script to qemu-nbd, though.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
'query-dump-guest-memory-capability' is used to query the available formats for
'dump-guest-memory'. The output of the command will be like:
-> { "execute": "query-dump-guest-memory-capability" }
<- { "return": { "formats":
["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Make monitor command 'dump-guest-memory' be able to dump in kdump-compressed
format. The command's usage:
dump [-p] protocol [begin] [length] [format]
'format' is used to specified the format of vmcore and can be:
1. 'elf': ELF format, without compression
2. 'kdump-zlib': kdump-compressed format, with zlib-compressed
3. 'kdump-lzo': kdump-compressed format, with lzo-compressed
4. 'kdump-snappy': kdump-compressed format, with snappy-compressed
Without 'format' being set, it is same as 'elf'. And if non-elf format is
specified, paging and filter is not allowed.
Note:
1. The kdump-compressed format is readable only with the crash utility and
makedumpfile, and it can be smaller than the ELF format because of the
compression support.
2. The kdump-compressed format is the 6th edition.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
functions are used to write page to vmcore. vmcore is written page by page.
page desc is used to store the information of a page, including a page's size,
offset, compression format, etc.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
DataCache is used to store data temporarily, then the data will be written to
vmcore. These functions will be called later when writing data of page to
vmcore.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
functions are used to write 1st and 2nd dump_bitmap of kdump-compressed format,
which is used to indicate whether the corresponded page is existed in vmcore.
1st and 2nd dump_bitmap are same, because dump level is specified to 1 here.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
the functions are used to write header of kdump-compressed format to vmcore.
Header of kdump-compressed format includes:
1. common header: DiskDumpHeader32 / DiskDumpHeader64
2. sub header: KdumpSubHeader32 / KdumpSubHeader64
3. extra information: only elf notes here
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
add some members to DumpState that will be used in writing vmcore in
kdump-compressed format. some of them, like page_size, will be initialized
in the patch.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
kdump-compressed format supports three compression format, zlib/lzo/snappy.
Currently, only zlib is available. This patch is used to support lzo/snappy.
'--enable-lzo/--enable-snappy' is needed to be specified with configure to make
lzo/snappy available for qemu
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
the function can be used by write_elf32_notes/write_elf64_notes to write notes
to a buffer. If fd_write_vmcore is used, write_elf32_notes/write_elf64_notes
will write elf notes to vmcore directly. Instead, if buf_write_note is used,
elf notes will be written to opaque->note_buf at first.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Function is used to write vmcore in flatten format. In flatten format, data is
written block by block, and in front of each block, a struct
MakedumpfileDataHeader is stored there to indicate the offset and size of the
data block.
struct MakedumpfileDataHeader {
int64_t offset;
int64_t buf_size;
};
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
flatten format will be used when writing kdump-compressed format. The format is
also used by makedumpfile, you can refer to the following URL to get more
detailed information about flatten format of kdump-compressed format:
http://sourceforge.net/projects/makedumpfile/
The two functions here are used to write start flat header and end flat header
to vmcore, and they will be called later when flatten format is used.
struct MakedumpfileHeader stored at the head of vmcore is used to indicate the
vmcore is in flatten format.
struct MakedumpfileHeader {
char signature[16]; /* = "makedumpfile" */
int64_t type; /* = 1 */
int64_t version; /* = 1 */
};
And struct MakedumpfileDataHeader, with offset and buf_size set to -1, is used
to indicate the end of vmcore in flatten format.
struct MakedumpfileDataHeader {
int64_t offset; /* = -1 */
int64_t buf_size; /* = -1 */
};
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
write_elf32_notes/wirte_elf64_notes use fd_write_vmcore to write elf notes to
vmcore. Adding parameter "WriteCoreDumpFunction f" makes it available to choose
the method of writing elf notes
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
WriteCoreDumpFunction is a function pointer that points to the function used to
write content in "buf" into core file, so "buf" should be const-qualify.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We were loading 16 bytes for both single and double-precision
scalar comparisons.
Reported-by: Alexander Bluhm <bluhm@openbsd.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When we restore the mxcsr register with FXRSTOR, or set it with gdb,
we need to update the various SSE status flags in CPUX86State
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This commit updates the status for the HMP, QAPI and QMP trees from
"Supported" to "Maintained".
In practice this means that patch review and pull requests may take
longer. Also, I'll rely more on reviewers such as Eric Blake so that
I'm able to send pull requests regularly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
As another convenience to allow using commands that expect a dict as
argument, this patch adds support for foo.bar=value syntax, similar to
command line argument style:
(QEMU) blockdev-add options.driver=file options.id=drive1 options.filename=...
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
-mem-prealloc asks to preallocate memory residing on -mem-path path.
Currently QEMU exits in case:
- Memory file has been created but allocation via explicit write
fails.
And it fallbacks to malloc in case:
- Querying huge page size fails.
- Lack of sync MMU support.
- Open fails.
- mmap fails.
Have the same behaviour for all cases: fail in case -mem-path and
-mem-prealloc are specified for regions where the requested size is
suitable for hugepages.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than fall back to TCG (so the user has to discover
whats happening, in case of no access to qemu stdout/stderr).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Updates include:
- Coverify fixes for vfio & pci-assign (Markus)
- VFIO blacklisting support for known brokwn PCI option ROMs (Bandan)
# gpg: Signature made Wed 26 Feb 2014 18:15:28 GMT using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found
* remotes/awilliam/tags/vfio-pci-for-qemu-20140226.0:
vfio: blacklist loading of unstable roms
qdev-monitor: set DeviceState opts before calling realize
pci-assign: Fix potential read beyond buffer on -EBUSY
vfio: Fix overrun after readlink() fills buffer completely
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to allow the user to choose the framebuffer for sparc-softmmu, add
-vga tcx and -vga cg3 options to the QEMU command line. If no option is
specified, the default TCX framebuffer is used.
Since proprietary FCode ROMs use a resolution of 1152x900, slightly relax the
validation rules to allow both displays to be initiated at the higher
resolution used by these ROMs upon request (OpenBIOS FCode ROMs default to
the normal QEMU sun4m default resolution of 1024x768).
Finally move any fprintf(stderr ...) statements in the areas affected by this
patch over to the new error_report() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
The sun4m architecture has one 'system' timer and one timer per CPU.
The CPU timers can be configured in two modes:
* 22 bits Counter/Timer. Periodic interrupts.
* 54 bits User timer. For profiling. In this mode, the Run/Stop bit
controls the timer.
The run/stop bit controls the timer only when it is in "User" mode, but
its state shall be persistent.
Signed-off-by: Olivier Danet <odanet@caramail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
On SparcStations, the HostID field in the NVRAM is equal to the last
three bytes of the MAC address (which is also stored in the NVRAM).
This constant is used as an identification/serial number on Solaris.
Signed-off-by: Olivier Danet <odanet@caramail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
When loading S390 kernels, the current code expects an ELF file with the
start address 0x10000. Other ELF files cause a segmentation fault. To avoid
these crashes, we should get the start address from the ELF file instead
of always using a hard-coded address.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The current implementation uses the second byte of the instruction
to identify the instruction handler. This is not sufficient to
support instructions not starting with 0xb2. This patch
adds separate handlers for 0xb2, 0xb9 and 0xeb to be able to
support the full instruction set.
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The SIGP order CPU RESET was still missing in the list of our
supported handler. This patch now adds a simple implementation,
by using the cpu_reset() function that is already available in
target-s390x/cpu.c.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The s390_cpu_initial_reset() function had two deficiencies: First, it
used an ioctl for the destination CPU, and this ioctl could block
nearly forever, as long as the destination CPU was running in the SIE
loop. Second, it also cleared the general purpose registers - something
it should not do according to the Principles of Operations.
Since we've already got another function for the initial CPU reset in
cpu.c, we can also use that function instead. And by using run_on_cpu()
for executing this code, we make sure that the destination CPU is
correctly kicked out of kernel mode now.
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some of the state in the kernel can not be reset from QEMU yet.
For this we've got to use the KVM_S390_INITIAL_RESET ioctl to make
sure that the state in the kernel is set to the right values during
initial CPU reset, too.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We have to set the cssid to 0, otherwise the stsch code will
return an operand exception without the m bit. In the same way
we should set m=0.
This case was triggered in some cases during reboot, if for some
reason the location of blk_schid.cssid contains 1 and m was 0.
Turns out that the qemu elf loader does not zero out the bss section
on reboot.
The symptom was an dump of the old kernel with several areas
overwritten. The bootloader does not register a program check
handler, so bios exception jumped back into the old kernel.
Lets just use a local struct with a designed initializer. That
will guarantee that all other subelements are initialized to 0.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The current code does not initialize next_idx in the virtio ring.
As the ccw bios will always use guest memory at a fixed location,
this queue might != 0 after a reboot.
Lets make the initialization explicit.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Code restructure in order to simplify class hierarchy
- remove S390SCLPDevice abstract base class
and move function pointers into new SCLPEventFacilityClass
- implement SCLPEventFacility as SysBusDevice
- use define constants for instance creation strings
The following ascii-art shows the class structure wrt the SCLP EventFacility
before (CURRENT) and after the restructure (NEW):
----
CURRENT:
"s390-sclp-events-bus"
+-------------------------+
| SCLPEventsBus |
|-------------------------|
|BusState qbus |
+-------------------------+
+-------------------------+
| SCLPEventFacility | - to be replaced by new SCLPEventFacility,
|-------------------------| which will be a SysBusDevice
|SCLPEventsBus sbus |
|DeviceState *qdev |
|unsigned int receive_mask|
+-------------------------+
+-------------------------+
| S390SCLPDeviceClass | - to be replaced by new SCLPEventFacilityClass
|-------------------------|
|DeviceClass qdev |
|*(init)() |
+-------------------------+
"s390-sclp-event-facility"
|
instance-of
|
V
"s390-sclp-device" - this is an abstract class
+-------------------------+
| S390SCLPDevice (A)| - to be replaced by new SCLPEventFacility
|-------------------------|
|SysBusDevice busdev |
|SCLPEventFacility *ef |
| |
|*(sclp_command_handler)()| - these 2 go to new SCLPEventFacilityClass
|*(event_pending)() |
+-------------------------+
----
NEW:
"s390-sclp-events-bus"
+-------------------------+
| SCLPEventsBus |
|-------------------------|
|BusState qbus |
+-------------------------+
+-------------------------+
| SCLPEventFacilityClass |
|-------------------------|
|DeviceClass parent_class |
| |
|*(init)() |
|*(command_handler)() |
|*(event_pending)() |
+-------------------------+
"s390-sclp-event-facility"
+-------------------------+
| SCLPEventFacility |
|-------------------------|
|SysBusDevice parent_class|
|SCLPEventsBus sbus |
|unsigned int receive_mask|
+-------------------------+
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the 51 most significant bits of the SCCB address are zero or equal to
the prefix, we should throw an specification exception, too.
Also moved the check for privileged mode to sclp_service_call() to have
all program checks in one place now.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The pointer to the SCCB should not be limited to 32 bits only.
In contrast to this, the command word parameter is only 32 bits
(the upper 32 bits should be ignored).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As a followup to commit 5f04c14a10
(s390-sclp: Define New SCLP Codes) we should mask the sclp command
not only in base sclp, but also in the event facility.
Based on an initial patch from Ralf Hoppe.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
So far, the DIAG 500 hypervisor call was only setting -EINVAL in
R2 when a guest tried to call this function with an illegal subcode.
This patch now changes the behavior so that a specification exception
is thrown instead, since this is the common behavior of other DIAG
functions (and other CPU instructions) when being called with illegal
parameters.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The SET-ARCHITECTURE handler in QEMU caused a program interruption.
This is wrong according to the "Principles of Operations" specification
(since SIGP should never cause a program interrupt) and was likely only
introduced for debugging purposes. Since we handle SET-ARCHITECTURE in
the kernel already and only dropped to user space in case of bad mode
parameters, we should just report INVALID PARAMETER in QEMU instead.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
S390 can also use async page faults, to enhance guest scheduling.
In case of live migration we want to disable the feature and let
all pending request finish.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch implements a floating-interrupt controller device (flic)
which interacts with the s390 flic kvm_device.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This updates the kvm headers to
commit d3714010c307d26df251c45be9cd12ab6d41f0c4
KVM: x86: emulator_cmpxchg_emulated should mark_page_dirty
in kvm/next.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
target-arm queue:
* fixes for various Coverity-spotted bugs
* support new KVM device control API for VGIC
* support KVM VGIC save/restore/migration
* more AArch64 system mode foundations
* support ARMv8 CRC instructions for A32/T32
* PL330 minor fixes and cleanup
# gpg: Signature made Wed 26 Feb 2014 17:51:32 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140226: (45 commits)
dma/pl330: implement dmaadnh instruction
dma/pl330: Fix buffer depth
dma/pl330: Add event debugging printfs
dma/pl330: Rename parent_obj
dma/pl330: printf format type sweep.
dma/pl330: Fix misleading type
dma/pl330: Delete overly verbose debug printf
target-arm: Add support for AArch32 ARMv8 CRC32 instructions
include/qemu/crc32c.h: Rename include guards to match filename
target-arm: Add utility function for checking AA32/64 state of an EL
target-arm: Implement AArch64 view of CPACR
target-arm: A64: Implement MSR (immediate) instructions
target-arm: Store AIF bits in env->pstate for AArch32
target-arm: A64: Implement WFI
target-arm: Get MMU index information correct for A64 code
target-arm: Implement AArch64 OSLAR_EL1 sysreg as WI
target-arm: Implement AArch64 dummy breakpoint and watchpoint registers
target-arm: Implement AArch64 ID and feature registers
target-arm: Implement AArch64 generic timers
target-arm: Implement AArch64 MPIDR
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
migration/next for 20140225
# gpg: Signature made Tue 25 Feb 2014 14:04:31 GMT using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20140225:
rdma: rename 'x-rdma' => 'rdma'
Fix two XBZRLE corruption issues
Fix vmstate_info_int32_le comparison/assign
qemu_file: use fwrite() correctly
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Net patches
# gpg: Signature made Tue 25 Feb 2014 13:32:33 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/net-pull-request:
virtio-net: use qemu_get_queue() where possible
vhost_net: use offload API instead of bypassing it
net: remove implicit peer from offload API
net: Disable netmap backend when not supported
net: add offloading support to netmap backend
net: make tap offloading callbacks static
net: virtio-net and vmxnet3 use offloading API
net: TAP uses NetClientInfo offloading callbacks
net: extend NetClientInfo for offloading
net: change vnet-hdr TAP prototypes
opencores_eth: flush queue whenever can_receive can go from false to true
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Certain cards such as the Broadcom BCM57810 have rom quirks
that exhibit unstable system behavior duing device assignment. In
the particular case of 57810, rom execution hangs and if a FLR
follows, the device becomes inoperable until a power cycle. This
change blacklists loading of rom for such cards unless the user
specifies a romfile or rombar=1 on the cmd line
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Setting opts before the realize property is set allows the
following patch to make decisions based on whether the user
specified "rombar". This also avoids having to create a new
tristate property especially for this purpose
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
readlink() doesn't write a terminating null byte.
assign_failed_examine() passes the unterminated string to strrchr().
Oops. Terminate it.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
readlink() returns the number of bytes written to the buffer, and it
doesn't write a terminating null byte. vfio_init() writes it itself.
Overruns the buffer when readlink() filled it completely.
Fix by treating readlink() filling the buffer completely as error,
like we do in pci-assign.c's assign_failed_examine().
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add support for AArch32 CRC32 and CRC32C instructions added in ARMv8
and add a CPU feature flag to enable these instructions.
The CRC32-C implementation used is the built-in qemu implementation
and The CRC-32 implementation is from zlib. This requires adding zlib
to LIBS to ensure it is linked for the linux-user binary.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393411566-24104-3-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are various situations where we need to behave differently
depending on whether a given exception level is in AArch64 or
AArch32 state. The state of the current exception level is stored
in env->aarch64, but there's no equivalent guest-visible architected
state bits for the status of the exception levels "above" the
current one which may still affect execution. At the moment we
only support EL1 (ie no EL2 or EL3) and insist that AArch64
capable CPUs run with EL1 in AArch64 state, but these may change
in the future, so abstract out the "what state is this?" check
into a utility function which can be enhanced later if necessary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 view of the CPACR. The AArch64
CPACR is defined to have a lot of RES0 bits, but since
the architecture defines that RES0 bits may be implemented
as reads-as-written and we know that a v8 CPU will have
no registered coprocessors for cp0..cp13 we can safely
implement the whole register this way.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the MSR (immediate) instructions, which can update the
PSTATE SP and DAIF fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
To avoid complication in code that otherwise would not need to
care about whether EL1 is AArch32 or AArch64, we should store
the interrupt mask bits (CPSR.AIF in AArch32 and PSTATE.DAIF
in AArch64) in one place consistently regardless of EL1's mode.
Since AArch64 has an extra enable bit (D for debug exceptions)
which isn't visible in AArch32, this means we need to keep
the enables in env->pstate. (This is also consistent with the
general approach we're taking that we handle 32 bit CPUs as
being like AArch64/ARMv8 CPUs but which only run in 32 bit mode.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the WFI instruction for A64; this just involves wiring
up the instruction, and adding a gen_a64_set_pc_im() which was
accidentally omitted from the A64 decoder top loop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Emit the correct MMU index information for loads and stores from
A64 code, rather than hardwiring it to "always kernel mode",
by storing the exception level in the TB flags, and make
cpu_mmu_index() return the right answer when the CPU is in
AArch64 mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Define a dummy version of the AArch64 OSLAR_EL1 system register
which just ignores writes. Linux will always write to this (it
is the OS lock used for debugging), but we don't support debug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
In AArch64 the breakpoint and watchpoint registers are mandatory, so the
kernel always accesses them on bootup. Implement dummy versions, which
read as written but have no actual effect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64-specific ID and feature registers. Although
many of these are currently not used by the architecture (and so
always zero for all implementations), we define the full set of
fields in the ARMCPU struct for symmetry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 TTBR* registers. For v7 these were already 64 bits
to handle LPAE, but implemented as two separate uint32_t fields.
Combine them into a single uint64_t which can be used for all purposes.
Since this requires touching every use, take the opportunity to rename
the field to the architectural name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 TCR_EL1, which is the 64 bit view of
the AArch32 TTBCR. (The uses of the bits in the register are
completely different, but in any given situation the CPU will
always interpret them one way or the other. In fact for QEMU EL1
is always 64 bit, but we share the state field because this
is the correct mapping to permit a future implementation of EL2.)
We also make the AArch64 view the 'master' as far as migration
and reset is concerned.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 memory attribute registers. Since QEMU doesn't
model caches it does not need to care about memory attributes at all,
and we can simply make these read-as-written.
We did not previously implement the AArch32 versions of the MAIR
registers, which went unnoticed because of the overbroad TLB_LOCKDOWN
reginfo definition; provide them now to keep the 64<->32 register
relationship clear.
We already provided AMAIR registers for 32 bit as simple RAZ/WI;
extend that to provide a 64 bit RAZ/WI AMAIR_EL1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
We don't support letting the guest do debug, but Linux prods the
monitor debug system control register anyway, so implement a dummy
RAZ/WI version.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 TLB invalidate operations. This is
the full set of TLBI ops defined for a CPU which doesn't
implement EL2 or EL3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement all the AArch64 cache invalidate and clean ops
(which are all NOPs since QEMU doesn't emulate the cache).
The only remaining unimplemented cache op is DC ZVA.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 view of the MIDR system register
(for AArch64 it is a simple constant, unlike the complicated
mess that TI925 imposes on the 32-bit view).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Make the cache ID system registers (CLIDR, CSSELR, CCSIDR, CTR)
visible to AArch64. These are mostly simple 64-bit extensions of the
existing 32 bit system registers and so can share reginfo definitions.
CTR needs to have a split definition, but we can clean up the
temporary user-mode implementation in favour of using the CPU-specified
reset value, and implement the system-mode-required semantics of
restricting its EL0 accessibility if SCTLR.UCT is not set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The raw read and write functions were using the ARM_CP_64BIT flag in
ri->type to determine whether to treat the register's state field as
uint32_t or uint64_t; however AArch64 register info structs don't use
that flag. Abstract out the "how big is the field?" test into a
function and fix it to work for AArch64 registers. For this to work
we must ensure that the reginfo structs put into the hashtable have
the correct state field for their use, not the placeholder STATE_BOTH.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Save and restore the ARM KVM VGIC state from the kernel. We rely on
QEMU to marshal the GICState data structure and therefore simply
synchronize the kernel state with the QEMU emulated state in both
directions.
We take some care on the restore path to check the VGIC has been
configured with enough IRQs and CPU interfaces that we can properly
restore the state, and for separate set/clear registers we first fully
clear the registers and then set the required bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687921-26921-1-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support creating the ARM vgic device through the device control API and
setting the base address for the distributor and cpu interfaces in KVM
VMs using this API.
Because the older KVM_CREATE_IRQCHIP interface needs the irq chip to be
created prior to creating the VCPUs, we first test if we can use the
device control API in kvm_arch_irqchip_create (using the test flag from
the device control API). If we cannot, it means we have to fall back to
KVM_CREATE_IRQCHIP and use the older ioctl at this point in time. If
however, we can use the device control API, we don't do anything and
wait until the arm_gic_kvm driver initializes and let that use the
device control API.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-5-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In ARMv5 level 2 page table descriptors, each 4K or 64K page is split into
four subpages, each of which can have different access permission settings,
which are specified by four two-bit fields in the l2 descriptor. A
long-standing cut-and-paste error meant we were using the wrong bits in
the virtual address to select the access-permission field for 4K pages.
The error has presumably not been noticed before because most guests don't
make use of the ability to set the access permissions differently for
each 1K subpage: if the guest gives the whole page the same access
permissions it doesn't matter which of the 4 AP fields we select.
(The whole issue is irrelevant for ARMv7 CPUs anyway because subpages
aren't supported there.)
Reported-by: Vivek Rai <Vivek.Rai@emulex.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392667690-8731-1-git-send-email-peter.maydell@linaro.org
The ethernet device in the musicpal only has two tx queues,
but we modelled it with four CTDP registers, presumably a
cut and paste from the rx queue registers. Since the tx_queue[]
array is only 2 entries long this allowed a guest to overrun
this buffer. Remove the nonexistent registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392737293-10073-1-git-send-email-peter.maydell@linaro.org
Acked-by: Jan Kiszka <jan.kiszka@web.de>
Cc: qemu-stable@nongnu.org
Add a cast to avoid an unintended sign extension that
would mean we returned 0xffffffff in the high 32 bits
for an IA0 read if bit 31 in the MAC address was 1.
(This is harmless since we'll only be doing 4 byte
reads, but it could be confusing, so best avoided.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1392647854-8067-3-git-send-email-peter.maydell@linaro.org
readlink() returns the number of bytes written to the buffer, and it
doesn't write a terminating null byte. do_readlink() writes it
itself. Overruns the buffer when readlink() filled it completely.
Fix by reserving space for the null byte when calling readlink(), like
we do elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Inline the only usage of each of xilinx_axiethernet_init and
xilinx_axidma_init. Converts this init to at least a semi-recent QOM
styling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Define (missing) macros for the interrupt and memory maps for the sake
of self documentation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
gmodule-2.0's pkg-config files include -Wl,--export-dynamic, which breaks
static builds. It is a glib bug, but we need to support --static builds for
the linux-user targets, and in the end all that is needed to fix this is:
* outlaw --enable-modules --static, which makes little sense anyway
* only include gmodule-2.0's cflags and ldflags if --enable-modules is
specified on the command line.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1393346215-5636-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_get_queue() is a shorthand for qemu_get_subqueue(n->nic, 0). Use
the shorthand where possible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is no need to access backend->info->has_vnet_hdr() and friends
anymore. Use the qemu_has_vnet_hdr() API instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap
device). The API was defined to implicitly use nc->peer, saving the
caller the trouble.
This wasn't ideal because:
1. There are callers who have the peer but not the NIC. Currently they
are forced to bypass the API and access peer->info->... directly.
2. The rest of the net.h API uses nc, not nc->peer, so it is
inconsistent.
This patch pushes nc->peer back up to callers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As far as we can tell, all known bugs have been fixed:
1. Parallel migrations are working
2. IPv6 migration is working
3. virt-test is working
I'm not comfortable sending the revised libvirt patch
until this is accepted or review suggestions are addressed,
(including pin-all support. It does not make sense to
remove experimental for one thing and not the other. That's
too many trips through the libvirt community).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Push zero'd pages into the XBZRLE cache
A page that was cached by XBZRLE, zero'd and then XBZRLE'd again
was being compared against a stale cache value
Don't use 'qemu_put_buffer_async' to put pages from the XBZRLE cache
Since the cache might change before the data hits the wire
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fix comparison of vmstate_info_int32_le so that it succeeds if loaded
value is (l)ess than or (e)qual
When the comparison succeeds, assign the value loaded
This is a change in behaviour but I think the original intent, since
the idea is to check if the version/size of the thing you're loading is
less than some limit, but you might well want to do something based on
the actual version/size in the file
Fix up comment and name text
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
fwrite() returns the number of items written. But when there is one
error, it can return a short write.
In the particular bug that I was tracking, I did a migration to a
read-only filesystem. And it was able to finish the migration
correctly. fwrite() never returned a negative error code, nor zero,
always 4096. (migration writes chunks of about 14000 bytes). And it
was able to "complete" the migration with success (yes, reading the
file was a bit more difficult).
To add insult to injury, if your amount of memory was big enough (12GB
on my case), it overwrote some important structure, and from them,
malloc failed. This check makes the problem go away.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* remotes/mdroth/qga-pull-2014-02-24:
qemu-ga: isa-serial support on Windows
qga: Fix memory allocation pasto
qga: Don't require 'time' argument in guest-set-time command
qga: vss-win32: Fix interference with snapshot deletion by other VSS request
qga: vss-win32: Fix interference with snapshot creation by other VSS requesters
qga: vss-win32: Use NULL as an invalid pointer for OpenEvent and CreateEvent
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Xtensa fixes and improvements queue 2014-02-24:
- add support for ML605 and KC705 FPGA boards;
- flush opencores_eth queue when new RX descriptor is available;
- add basic checks to cache opcodes;
- make core configuration available to tests;
- implement HW config ID special registers.
# gpg: Signature made Mon 24 Feb 2014 00:52:42 GMT using RSA key ID F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
* remotes/xtensa/tags/20140224-xtensa:
target-xtensa: provide HW confg ID registers
target-xtensa: refactor standard core configuration
target-xtensa: add basic tests for cache opcodes
target-xtensa: allow using core configuration in tests
target-xtensa: add overridable test_init macro
target-xtensa: add basic checks to icache opcodes
target-xtensa: add basic checks to dcache opcodes
target-xtensa: add RRRI4 opcode format fields
opencores_eth: flush queue whenever can_receive can go from false to true
hw/xtensa: add support for ML605 and KC705 FPGA board
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch fixes configure so that the netmap backend is not compiled in if the
host doesn't support an API version >= 11. A version upper bound (15) has been
added so that the netmap API can be extended with some minor features without
requiring QEMU code modifications.
Moreover, some changes have been done to net/netmap.c in order to reflect the
current netmap API/ABI (11).
The NETMAP_WITH_LIBS macro makes possible to include some utilities (e.g.
netmap ring macros, D(), RD() and other high level functions) through the netmap
headers. In this way we get rid of the D and RD macro definitions in the QEMU
code, and we open the way for further code simplifications that will be
introduced by future patches.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Whit this patch, the netmap backend supports TSO/UFO/CSUM
offloadings, and accepts the virtio-net header, similarly to what
happens with TAP. The offloading callbacks in the NetClientInfo
interface have been implemented.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since TAP offloadings are manipulated through a new API, it's
not necessary to export them in include/net/tap.h anymore.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With this patch, virtio-net and vmxnet3 frontends make
use of the qemu_peer_* API for backend offloadings manipulations,
instead of calling TAP-specific functions directly.
We also remove the existing checks which prevent those frontends
from using offloadings with backends different from TAP (e.g. netmap).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The TAP NetClientInfo structure is inizialized with the TAP-specific
functions that manipulates offloading features.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some new callbacks have been added to generalize the operations done
by virtio-net and vmxnet3 frontends to manipulate TAP offloadings.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used
to return int, even though they only return true/false values.
This patch changes the prototypes to return bool.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following registers control whether MAC can receive frames:
- MODER.RXEN bit that enables/disables receiver;
- TX_BD_NUM register that specifies number of RX descriptors.
Notify QEMU networking core when the MAC is ready to receive frames.
Discard frame and raise BUSY interrupt when the frame arrives but the
current RX descriptor is not empty.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check that the C++ compiler works with the C compiler; if it
does not, then don't pass CXX to the build process. This
fixes a regression where QEMU was no longer building if the
build environment didn't have a C++ compiler (introduced
in commit 3144f78b, which incorrectly assumed that rules.mak
would only see a non-empty $(CXX) if configure had actually
found a working C++ compiler).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1392909016-14028-1-git-send-email-peter.maydell@linaro.org
Add HDA_AUDIO type and macro, drop DO_UPCAST().
Had to add a abstract hda audio class as parent
for all hda-* variants to make that fly. Killed
some init code duplication while being at it.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coalesce all standard configuration sections into single
DEFAULT_SECTIONS macro for all cores. This allows to add new features in
a single place: overlay_tool.h
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Test that non-locking prefetch operations don't cause exceptions on
missing TLB and that other 'hit' cache operations do.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add path to the core configuration directory to test build command and
replace .include asm directive with #include to enable preprocessing.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Some test suites, like MMU, need per-test initialization. Don't make them
redefine test macro, add test_init for that purpose.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Check privilege level for privileged instructions (IHU, III, IIU and IPFL
are privileged), memory accessibility for instructions that reference memory
(IH* and IPFL) and windowed register validity for all instruction cache
instructions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Check privilege level for privileged instructions (DHI, DHU, DII, DIU, DIWB,
DIWBI, DPFL are privileged), memory accessibility for instructions that
reference memory (all DH* and DPFL) and windowed register validity for all
data cache instructions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The following registers control whether MAC can receive frames:
- MODER.RXEN bit that enables/disables receiver;
- TX_BD_NUM register that specifies number of RX descriptors.
Notify QEMU networking core when the MAC is ready to receive frames.
Discard frame and raise BUSY interrupt when the frame arrives but the
current RX descriptor is not empty.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for isa-serial method for qemu-ga on Windows,
Added -p command line parameter for serial port name
specification, e.g. "-p COM15".
Signed-off-by: Miki Mishael <mmishael@redhat.com>
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
*added default isa-serial path to help output
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qmp_guest_file_seek() allocates memory for a GuestFileRead object
instead of the GuestFileSeek object it actually uses. Harmless,
because the GuestFileRead is slightly larger.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
As the description to the guest-set-time states, the command is
there to ease time synchronization after resume. If guest was
suspended for longer period of time, its system time can go off
so badly, that even NTP refuses to set it. That's why the command
was invented: to give users chance to set the time (not
necessarily 100% correct). However, there's is no real need for
us to require users to pass an arbitrary time. Especially if we
can read the correct value from RTC (boiling down to reading
host's time). Hence this commit enables logic:
guest-set-time() == guest-set-time($now_from_rtc)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When a VSS requester such as vshadow.exe or diskshadow.exe requests to
delete snapshots, qemu-ga VSS provider's DeleteSnapshots() is also called
and returns E_NOTIMPL, that makes the deletion fail.
To avoid this issue, return S_OK and set values that represent no snapshots
are deleted by qemu-ga VSS provider.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When a VSS requester such as vshadow.exe or diskshadow.exe requests to
create disk snapshots, Windows may choose qemu-ga VSS provider if it is
only provider registered on the system. However, because it provides only a
function to freeze the filesystem, the snapshotting fails.
This patch adds a check into CQGAVssProvider::IsVolumeSupported() to reject
the request from other VSS requesters, so that the other provider is chosen.
The check of requester is done by confirming event channels between
qemu-ga's requester and provider established. To ensure that the events are
initialized when CQGAVssProvider::IsVolumeSupported() is called, it moves
the initialization earlier.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
OpenEvent and CreateEvent WinAPI return NULL when failed to open/create
events handles, instead of INVALID_HANDLE_VALUE (although their return
types are HANDLE).
This replaces INVALID_HANDLE_VALUE related to event handles with NULL.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
commit fa6252b0 introduced a segfault because it tries
to read iTask.task->sense after iTask.task has been
freed.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To make a VM more convincing to my application, it's useful to be able
to add a port WWN and relative target port index to the descriptors
returned for VPD page 83h. Add device properties to allow setting
these, and return them from INQUIRY commands.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch ensures that we only query for block provisioning and
block limits vpd pages if they are advertised. It also cleans
up the inquiry code and eliminates some redundant code.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
the retry logic was broken because the complete status
of the task structure was not reset. this resulted in
an infinite loop retrying the command over and over.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The transfer length depends on field BYTCHK, which is encoded in byte
1, bits 1..2. However, the guard for for case BYTCHK=11b doesn't
work, and we get case 01b instead. Fix it.
Note that since emulated scsi-hd fails the command outright, it takes
SCSI passthrough of a device that actually implements VERIFY with
BYTCHK=11b to make the bug bite.
Screwed up in commit d12ad44. Spotted by Coverity.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SCSI defines a status code for when a thin-provisioned LUNs would
exceed the allocated space, map ENOSPC to it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current buffer size fails the assersion check in like
hw/scsi/scsi-bus.c:1655: assert(req->sense_len <= sizeof(req->sense));
when backend (block/iscsi.c) returns more data then 96.
Exercise the core dump path by booting an Gentoo ISO with scsi-generic
device backed with iscsi (built with libiscsi 1.7.0):
x86_64-softmmu/qemu-system-x86_64 \
-drive file=iscsi://localhost:3260/iqn.foobar/0,if=none,id=drive-disk \
-device virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x6 \
-device scsi-generic,drive=drive-disk,bus=scsi1.0,id=iscsi-disk \
-boot d \
-cdrom gentoo.iso
qemu-system-x86_64: hw/scsi/scsi-bus.c:1655: scsi_req_complete:
Assertion `req->sense_len <= sizeof(req->sense)' failed.
According to SPC-4, section 4.5.2.1, 252 is the limit of sense data. So
increase the value to fix it.
Also remove duplicated define for the macro.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a test case to test 081 for mixing full option dicts and reference
strings of specifying the quorum child block devices through QMP.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Although it may not look like it, this patch simplifies quorum_open().
qdict_array_split() is now able to return QLists with different objects
than only QDicts, therefore it will now do all the work and
quorum_open() does not have to handle reference strings by itself.
This allows mixing full option dicts and reference strings for
specifying the child block devices of quorum; furthermore, it improves
handling of malformed specifications.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Example of command line:
-drive if=virtio,driver=quorum,\
children.0.file.filename=1.raw,\
children.0.node-name=1.raw,\
children.0.driver=raw,\
children.1.file.filename=2.raw,\
children.1.node-name=2.raw,\
children.1.driver=raw,\
children.2.file.filename=3.raw,\
children.2.node-name=3.raw,\
children.2.driver=raw,\
vote-threshold=2
blkverify=on with vote-threshold=2 and two files can be passed to
emulate blkverify.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We really want that live migration works with quorum so implement
quorum_invalidate_cache().
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Check that every bs file returns the same length.
Otherwise, return -EIO to disable the quorum and
avoid length discrepancy.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patchset enables the core of the quorum mechanism.
The num_children reads are compared to get the majority version and if this
version exists more than threshold times the guest won't see the error at all.
If a block is corrupted or if an error occurs during an IO or if the quorum
cannot be established QMP events are used to report to the management.
Use gnutls's SHA-256 to compare versions.
--enable-quorum must be used to enable the feature.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add code to do num_children reads in parallel and cleanup the structures
afterwards.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_iovec_compare() will be used to compare IOs vectors in quorum blkverify
mode. The patch extracts these functions in order to factorize the code.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Create the structure holding the quorum settings and write the minimal block
driver instanciation boilerplate.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Quorum is a block filter mirroring writes to num_children children.
For reads quorum reads each children and does a vote.
If more than vote_threshold versions are identical the quorum is reached and
this winning version is returned to the guest. So quorum prevents bit corruption.
For high availability purpose minority errors are reported via QMP but the guest
does not see them.
This patch creates the driver C source file and introduces the structures that
will be used in asynchronous reads and writes.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qdict_array_split() should terminate if it encounters both an entry with
a key of "%u" and entries with keys prefixed "%u." for the same index.
This patch adds a test for this case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test the new functionality of qdict_array_split(), that is, splitting
off single objects.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, qdict_array_split() only splits off entries with a key prefix
of "%u.", packing them into a new QDict. This patch makes it support
entries with the plain key "%u" as well, directly putting them into the
new QList without creating a QDict.
If there is both an entry with a key of "%u" and other entries with keys
prefixed "%u." (for the same index), the function simply terminates.
To do this, this patch also adds a static function which tests whether a
given QDict contains any keys with the given prefix. This is used to test
whether entries with a key prefixed "%u." do exist in the source QDict
without modifying it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In config_parse_qdict_section(), the QList returned by
qdict_array_split() is assumed to only contain QDicts. Currently, this
is true but it may (and will) change in the future. Therefore, check
whether the assumption actually holds.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch allows using 'qemu-img $subcmd -o help' for the create,
convert and amend subcommands, without specifying the previously
required filename arguments.
Note that it's still allowed and meaningful to specify a filename: An
invocation like 'qemu-img create -o help sheepdog:foo' will also display
options that are provided by the Sheepdog driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of ignoring all option values but the last one, multiple -o
options now have the same meaning as having a single option with all
settings in the order of their respective -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of ignoring all option values but the last one, multiple -o
options now have the same meaning as having a single option with all
settings in the order of their respective -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If you specified multiple -o options for qemu-img create, it would
silently ignore all but the last one. This patch fixes the problem.
Now multiple -o options has the same meaning as having a single option
with all settings in the order of their respective -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
has_help_option() checks if any help option ('help' or '?') occurs
anywhere in an option string, so that things like 'cluster_size=4k,help'
are recognised.
is_valid_option_list() ensures that the option list doesn't have options
with leading commas or trailing unescaped commas.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of just putting it in debugging output, we can now put the
value in an Error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Returning "Wrong medium type" for an image that does not have a valid
header is a bit weird. Improve the error by mentioning what format
was trying to open it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we can return the "right" errors, use the Error** parameter
to pass them back instead of just printing them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This prepares for propagating errors from vmdk_open_sparse and
vmdk_open_desc_file up to the caller of vmdk_open.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, we just try reading a VMDK file as both image and descriptor.
This makes it hard to choose which of the two attempts gave the best error.
We'll decide in advance if the file looks like an image or a descriptor,
and this patch is the first step to that end.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ ./qemu-io-old
qemu-io-old> open -r -o driver=vvfat,fat-type=24,dir=i386-softmmu
Valid FAT types are only 12, 16 and 32
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o driver=vvfat,fat-type=24,dir=i386-softmmu
qemu-io: can't open device (null): Valid FAT types are only 12, 16 and 32
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, "gluster:///volname/img" and (using file. options)
"file.driver=gluster,file.filename=foo" will segfault. Also,
"//host/volname/img" will be rejected, but it is a valid URL
that should be accepted just fine with "file.driver=gluster".
Accept all of these, by inferring missing transport and host
as TCP and localhost respectively.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=iscsi,file.filename=foo
Failed to parse URL : foo
qemu-io-old: can't open device (null): Could not open 'foo': Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=iscsi,file.filename=foo
qemu-io: can't open device (null): Failed to parse URL : foo
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-nbd is one of the few valid users of qerror_report_err. Move
the error-reporting socket wrappers there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd
one of path and host must be specified.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd
qemu-io: can't open device (null): one of path and host must be specified.
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
qemu-io: can't open device (null): path and host may not be used at the same time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ qemu-io-old
qemu-io-old> open -r -o file.driver=nbd
qemu-io-old: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd
one of path and host must be specified.
qemu-io: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io: can't open device (null): Could not open image: Invalid argument
Next patch will fix the error propagation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This option is now unnecessary since specifying BDRV_O_PROTOCOL as flag
will do exactly the same.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The fail and success paths of bdrv_file_open() may be further shortened
by reusing code already existent in bdrv_open(). This includes
bdrv_file_open() not taking the reference to options which allows the
removal of QDECREF(options) in that function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The fail paths of bdrv_file_open() and bdrv_open() naturally exhibit
similarities, thus it is possible to reuse the one from bdrv_open() and
shorten the one in bdrv_file_open() accordingly.
Also, setting bs->options in bdrv_file_open() is not necessary if it is
already done in bdrv_open().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change bdrv_file_open() to take a simple pointer to an already existing
BDS instead of an indirect one. The BDS will be created in bdrv_open()
if necessary.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove the reference parameter and the related handling code from
bdrv_file_open(), since it exists in bdrv_open() now as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the
call to bdrv_file_open(). Additionally, make bdrv_file_open() static and
therefore bdrv_open() the only way to call it.
Consequently, all existing calls to bdrv_file_open() have to be adjusted
to use bdrv_open() with the BDRV_O_PROTOCOL flag instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of making the backing file contents visible again after a discard
request, set the zero flag if possible (i.e. on version >= 3).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
target-arm queue:
* Fix a bug causing an assertion in the NVIC on ARMv7M models
* More A64 Neon instructions
* Refactor cpreg API to separate out access check functions, as
groundwork for AArch64 system mode
* Fix bug in linux-user A64 store-exclusive of XZR
# gpg: Signature made Thu 20 Feb 2014 11:12:57 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140220: (30 commits)
linux-user: AArch64: Fix exclusive store of the zero register
target-arm: A64: Implement unprivileged load/store
target-arm: A64: Implement narrowing three-reg-diff operations
target-arm: A64: Implement the wide 3-reg-different operations
target-arm: A64: Add most remaining three-reg-diff widening ops
target-arm: A64: Add opcode comments to disas_simd_three_reg_diff
target-arm: A64: Implement store-exclusive for system mode
target-arm: Fix incorrect type for value argument to write_raw_cp_reg
target-arm: Remove failure status return from read/write_raw_cp_reg
target-arm: Remove unnecessary code now read/write fns can't fail
target-arm: Drop success/fail return from cpreg read and write functions
target-arm: Convert miscellaneous reginfo structs to accessfn
target-arm: Convert generic timer reginfo to accessfn
target-arm: Convert performance monitor reginfo to accessfn
target-arm: Split cpreg access checks out from read/write functions
target-arm: Stop underdecoding ARM946 PRBS registers
target-arm: Log bad system register accesses with LOG_UNIMP
target-arm: Remove unused ARMCPUState sr substruct
target-arm: Restrict check_ap() use of S and R bits to v6 and earlier
target-arm: Define names for SCTLR bits
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qtest resource cleanup pull request
# gpg: Signature made Wed 19 Feb 2014 14:46:34 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/qtest-monitor-process-pull-request:
qtest: kill QEMU process on g_assert() failure
qtest: make QEMU our direct child process
qtest: drop unused child_pid field
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tracing pull request
# gpg: Signature made Wed 19 Feb 2014 15:42:20 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace-events: Fix typo in "offset"
Add ust generated files to .gitignore
Update documentation for LTTng ust tracing
Adapt Makefiles to the new LTTng ust interface
Modified the tracetool framework for LTTng 2.x
Fix configure script for LTTng 2.x
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a target-i386 emulation regression
# gpg: Signature made Wed 19 Feb 2014 15:42:12 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
target-i386: Fix I/O bitmap checks for in/out
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Win32 doesn't have a cpuid.h, and MacOSX may have one but without
the __cpuid() function we use, which means that commit 9d2eec20
broke the build for those platforms. Fix this by tightening up
our configure cpuid.h check to test that the functions we need
are present, and adding some missing #ifdef guards in
tcg/i386/tcg-target.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Commit 94ccff13 introduced a more verbose failure message and retry
operations on KVM VM creation. However, it ended up using a variable
for its failure message that hasn't been initialized yet.
Fix it to use the value it meant to set.
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bdrv_acct_done was called unconditional. But in case the ioreq has no
segments there is no matching bdrv_acct_start call. This could lead to
bogus accounting values.
Found by code inspection.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
* remotes/rth/tcg-next:
tcg/i386: Use SHLX/SHRX/SARX instructions
tcg/i386: Use ANDN instruction
tcg/i386: Add tcg_out_vex_modrm
tcg/i386: Move TCG_CT_CONST_* to tcg-target.c
disas/i386: Disassemble ANDN/SHLX/SHRX/SHAX
tcg/optimize: Add more identity simplifications
tcg/optimize: Optmize ANDC X,Y,Y to MOV X,0
tcg/optimize: Simply some logical ops to NOT
tcg/optimize: Handle known-zeros masks for ANDC
tcg/optimize: add known-zero bits compute for load ops
tcg/optimize: improve known-zero bits for 32-bit ops
tcg/optimize: fix known-zero bits optimization
tcg/optimize: fix known-zero bits for right shift ops
tcg-arm: The shift count of op_rotl_i32 is in args[2] not args[1].
TCG: Fix 32-bit host allocation typo
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
qtest: Include system headers before user headers
qapi: Refine human printing of sizes
qdev: Use QAPI type names for properties
qdev: Add enum property types to QAPI schema
block: Handle "rechs" and "large" translation options
qdev: Remove hex8/32/64 property types
qdev: Remove most legacy printers
qdev: Use human mode in "info qtree"
qapi: Add human mode to StringOutputVisitor
qdev: Inline qdev_prop_parse()
qdev: Legacy properties are just strings
qdev: Legacy properties are now read-only
qdev: Remove legacy parsers for hex8/32/64
qdev: Sizes are now parsed by StringInputVisitor
qapi: Add size parser to StringInputVisitor
qtest: Don't segfault with invalid -qtest option
ipack: Move IndustryPack out of hw/char/
ipoctal232: QOM parent field cleanup
ipack: QOM parent field cleanup for IPackDevice
ipack: QOM parent field cleanup for IPackBus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adjust TMPO and added TMPB, TMPL, and TMPA. libtool needs the names
to be fixed (TMPB).
Add new functions do_libtool and libtool_prog.
Add check for broken gcc and libtool.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
$(common-obj-m) will include $(block-obj-m), like $(common-obj-y) does
for $(block-obj-y).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds loading, stamp checking and initialization of modules.
The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:
qemu_stamp_$RELEASEHASH
where $RELEASEHASH is generated by hashing version strings and content
of configure script.
With this, modules built from a different tree/version/configure will
not be loaded.
The module loading code requires gmodule-2.0.
Modules are searched under
- CONFIG_MODDIR
- executable folder (to allow running qemu-{img,io} in the build
directory)
- ../ of executable folder (to allow running system emulator in the
build directory)
Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
$(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add necessary rules and flags for shared object generation.
The new rules introduced here are:
1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.
2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:
foo.mo-objs := bar.o baz.o qux.o
in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.
3) For all files ending up in %.so, the following is added automatically:
foo.o-cflags += -fPIC -DBUILD_DSO
Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While -mdynamic-no-pic can speed up the code somewhat, it is only used
on the legacy PowerPC Mac OS X, and I am not sure if anyone is still
testing that. Disabling PIC can cause problems when enabling modules,
so do not do that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No longer adds flags and libs for them to global variables, instead
create config-host.mak variables like FOO_CFLAGS and FOO_LIBS, which is
used as per object cflags and libs.
This removes unwanted dependencies from libcacard.
Signed-off-by: Fam Zheng <famz@redhat.com>
[Split from Fam's patch to enable modules. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds extract-libs in LINK to expand any "per object libs", the syntax to define
such a libs options is like:
foo.o-libs := $(CURL_LIBS)
in block/Makefile.objs.
Similarly,
foo.o-cflags := $(FOO_CFLAGS)
is also supported.
"foo.o" must be listed in a nested var (e.g. common-obj-y) to make the
option variables effective.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:
$(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)
Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.
The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this change, main() calls qemu_init_exec_dir and uses argv[0] to
init exec_dir. The saved value can be retrieved with
qemu_get_exec_dir later. It will be reused by module loading.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement the unprivileged load and store instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the narrowing three-reg-diff operations: ADDHN,
RADDHN, SUBHN and RSUBHN.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the wide three-reg-different operations:
SADDW, UADDW, SSUBW and USUBW.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the remainder of the 64x64->128 operations in the three-reg-diff
category except for PMULL, PMULL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The opcode switch in disas_simd_three_reg_diff() is missing the
customary comments indicating which cases correspond to which
instructions. Add them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
System mode store-exclusive use a different code path to usermode ones;
implement this missing code, in a similar way to the 32 bit version.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The write_raw_cp_reg's value argument should be a uint64_t, since
that's what all its callers hand it and what all the functions it
calls take. A (harmless) typo meant we were accidentally declaring
it as int64_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The read_raw_cp_reg and write_raw_cp_reg functions can now never
fail (in fact they should never have failed previously unless
there was a bug in a reginfo that meant no raw accessor was
provided for a might-trap register). This allows us to clean up
their prototypes so the write function returns void and the
read function returns the value read, which in turn lets us
simplify the callers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Now that cpreg read and write functions can't fail and throw an
exception, we can remove the code from the translator that synchronises
the guest PC in case an exception is thrown.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All cpreg read and write functions now return 0, so we can clean up
their prototypes:
* write functions return void
* read functions return the value rather than taking a pointer
to write the value to
This is a fairly mechanical change which makes only the bare
minimum set of changes to the callers of read and write functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Convert the remaining miscellaneous cases of reginfo read/write
functions returning EXCP_UDEF to use an accessfn instead:
TEEHBR, and the ATS address-translation operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the reginfo structs for the generic timer registers
to use access functions rather than returning EXCP_UDEF from
their read handlers. In some cases this allows us to remove
a read handler completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Convert the performance monitor reginfo definitions to use
an accessfn rather than returning EXCP_UDEF from read and
write functions. This also allows us to fix a couple of XXX
cases where we weren't imposing the access restrictions on
RAZ/WI or constant registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several of the system registers handled via the ARMCPRegInfo
mechanism have access trap control bits controlling whether the
registers are accessible to lower privilege levels. Replace
the existing mechanism (allowing the read and write functions
to return EXCP_UDEF if access is denied) with a dedicated
"check access rights" function pointer in the ARMCPRegInfo.
This will allow us to simplify some of the register definitions,
which no longer need read/write functions purely to handle
the access checks.
We take the opportunity to define the return value from the
access checking function in a way that allows us to set the
correct exception syndrome information for exceptions taken
to AArch64 (which may need to distinguish access failures due
to a configurable trap or enable from other kinds of access
failure).
This commit defines the new mechanism but does not move any
of the registers across to use it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The ARM946 has 8 PRBS (protection region base and size) registers.
Currently we implement these with a CP_ANY reginfo; however this
underdecodes (since there are 16 possible values of CRm but only
8 registers) and we catch the invalid values in the read and
write functions. However this causes issues with migration since
we only migrate the first of a wildcard register set, so we only
migrate c6_region[0]. It also makes it awkward to pull reginfo
access checks out into their own function.
Avoid all these problems by just defining separate reginfo structs
for each of the 8 registers; this also lets us avoid having any
read or write functions and will result in more efficient direct
field accesses from generated code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Log guest attempts to access unimplemented system registers via
the LOG_UNIMP reporting mechanism (for both the 32 bit and 64 bit
instruction sets). This is particularly useful for debugging
problems where the guest is trying to use a system register that
QEMU doesn't implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Remove the 'struct sr' from ARMCPUState -- it isn't actually used and is
a hangover from the original separate system register implementation used
by the SuSE linux-user-mode-only AArch64 target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The SCTLR bits S and R (8 and 9) only exist in ARMv6 and earlier.
In ARMv7 these bits RAZ, and in ARMv8 they are reassigned. Guard
the use of them in check_ap() so that we don't get incorrect results
for ARMv8 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The SCTLR is full of bits for enabling or disabling various things, and so
there are many places in the code which check if certain bits are set.
Define some named constants for the SCTLR bits so these checks are easier
to read.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the set of CPUs for which we provide a QEMU_KVM_ARM_TARGET_*
constant to include all the ones currently supported by the kernel
headers we are using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the remaining instructions in the SIMD 3-reg-same
and scalar-3-reg-same groups: FMULX, FRECPS, FRSQRTS, FACGE,
FACGT, FMLA and FMLS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The ARMv8 instruction set includes a fused floating point
reciprocal square root step instruction which demands an
"(x * y + z) / 2" fused operation. Support this by adding
a flag to the softfloat muladd operations which requests
that the result is halved before rounding.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the floating-point pairwise operations
FADDP, FMAXP, FMAXNMP, FMINP and FMINNMP. To do this we use the
code which was previously handling only integer pairwise operations,
and push the integer-specific decode and handling of unallocated
cases up one level in the call tree, so we can also call it from
the floating-point section of the decoder.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds all forms of the SIMD floating point and set instructions:
FCM(GT|GE|EQ|LE|LT)
Most of the heavy lifting is done by either the existing neon helpers or
some new helpers for the 64bit double cases. Most of the code paths are
common although the 2misc versions are a little special as they compare
against zero.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[PMM: fixed some minor bugs, added the 2-misc-scalar encoding]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the scalar three different instruction group:
it only has three instructions in it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the SIMD scalar indexed instructions. The encoding
here is nearly identical to the vector indexed grouping, so
we combine the two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the 'long' operations in the vector x indexed
element category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement all the SIMD vector x indexed element instructions
in the subcategory which are not 'long' ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Commit 40d225009e accidentally changed the behaviour of
gic_acknowledge_irq() for the NVIC. The NVIC doesn't have SGIs,
so this meant we hit an assertion:
gic_acknowledge_irq: Assertion `s->sgi_pending[irq][cpu] != 0' failed.
Return NVIC acknowledge-irq to its previous behaviour, like 11MPCore.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Commit 1b90d56e changed the implementation of in/out imm to not assign
the accessed port number to cpu_T[0] as it appeared unnecessary.
However, currently gen_check_io() makes use of cpu_T[0] to implement the
I/O bitmap checks, so it's in fact still used and the change broke the
check, leading to #GP in legitimate cases (and probably also allowing
access to ports that shouldn't be allowed).
This patch reintroduces the missing assignment for these cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The QEMU process stays running if the test case fails. This patch fixes
the leak by installing a SIGABRT signal handler which invokes
qtest_end().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
qtest_init() cannot use exec*p() to launch QEMU since the exec*p()
functions take an argument array while qtest_init() takes char
*extra_args. Therefore we execute /bin/sh -c <command-line> and let the
shell parse the argument string.
This left /bin/sh as our child process and our child's child was QEMU.
We still want QEMU's pid so the -pidfile option was used to let QEMU
report its pid.
The pidfile needs to be unlinked when the test case exits or fails. In
other words, the pidfile creates a new problem for us!
Simplify all this using the shell 'exec' command. It allows us to
replace the /bin/sh process with QEMU. Then we no longer need to use
-pidfile because we already know our fork child's pid.
Note: Yes, it seems silly to exec /bin/sh when we could just exec QEMU
directly. But remember qtest_init() takes a single char *extra_args
command-line fragment instead of a real argv[] array, so we need
/bin/sh's argument parsing behavior.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Fix two issues in error handling in target_to_host_semarray():
* don't leak the host_array buffer if lock_user fails
* return an error if malloc() fails
v2: added missing * -Riku Voipio
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
* A new format is required to generate definitions for ust tracepoints.
Files ust_events_h.py and ust_events_c.py define common macros, while
new function ust_events_h in events.py does the actual definition of
each tracepoint.
* ust.py generates the new interface for calling userspace tracepoints
with LTTng 2.x, replacing trace_name(args) to tracepoint(name, args).
* As explained in ust_events_c.py, -Wredundant-decls gives a warning
when compiling with gcc 4.7 or older. This is specific to lttng-ust so
for now use a pragma clause to avoid getting a warning.
Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca>
Reviewed-by: Alex Bennée <alex@bennee.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In lock_iovec() if lock_user() failed we were doing an unlock_user
but not a free(vec), which is the wrong way round. We were also
assuming that free() and unlock_user() don't touch errno, which
is not guaranteed. Fix both these problems.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When forcing a fatal signal, we weren't initialising the sa_flags
field in the struct sigaction we used to reset the signal handler
to SIG_DFL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Avoid calling g_free() on unintialized data in the error-handling
paths in elf_core_dump() by splitting the initialization of the
elf_note_info struct out of fill_note_info() so that it's always
valid to call free_note_info() whether we got to the point of
being able to fill_note_info() or not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Allow the scheduled transfer time be a bit behind, to
compensate for latencies. Without this xhci will wait
way to often for the mfindex wraparound, assuming the
scheduled time is in the future just because qemu is
a bit behind in processing the iso transfer requests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is dangerous to include user headers before system headers since user
macros can affect system headers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce 'query-chardev-backends' QMP command which lists all
supported character device backends.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qmp-shell hides the QMP wire protocol JSON encoding from the user. Most
of the time this is helpful and makes the command-line human-friendly.
Some QMP commands take a dict as an argument. In order to express this
we need to revert back to JSON notation.
This patch allows JSON dict arguments in qmp-shell so commands like
blockdev-add and nbd-server-start can be invoked:
(QEMU) blockdev-add options={"driver":"file","id":"drive1",...}
Note that spaces are not allowed since str.split() is used to break up
the command-line arguments first.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch fixes a timing issue that migrate command (without -d) does not
block in some cases.
The original version of hmp.c:hmp_migrate_status_cb checks if the
migration status is 'active' or not to detect the completion of a migration.
However, if this function is executed when the migration status is stil
'setup' (the status before 'active'), migration command returns
immediately even if the user does not specify -d option.
Signed-off-by: Soramichi Akiyama <akiyama@nii.ac.jp>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
These three-operand shift instructions do not require the shift count
to be placed into ECX. This reduces the number of mov insns required,
with the mere addition of a new register constraint.
Don't attempt to get rid of the matching constraint, as that's impossible
to manipulate with just a new constraint. In addition, constant shifts
still need the matching constraint.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Note that the optimizer cannot simplify ANDC X,Y,C to AND X,Y,~C
so we must handle constants in the implementation of andc.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
These are not needed by users of tcg-target.h. No need to recompile
when we adjust them.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Given, of course, an appropriate constant. These could be generated
from the "canonical" operation for inversion on the guest, or via
other optimizations.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The shl_i32 op might set some bits of the unused 32 high bits of the
mask. Fix that by clearing the unused 32 high bits for all 32-bit ops
except load/store which operate on tl values.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Known-zero bits optimization is a great idea that helps to generate more
optimized code. However the current implementation only works in very few
cases as the computed mask is not saved.
Fix this to make it really working.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
32-bit versions of sar and shr ops should not propagate known-zero bits
from the unused 32 high bits. For sar it could even lead to wrong code
being generated.
Cc: qemu-stable@nongnu.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This resolves the build issue with building the ROMs on OpenBSD on x86 archs.
As of OpenBSD 5.3 the compiler builds PIE binaries by default and thus the
whole OS/packages and so forth. The ROMs need to have PIE disabled.
Check in configure whether the compiler supports the flags for disabling
PIE, and if it does then use them for building the ROMs. This fixes the
following buildbot failure:
>From the OpenBSD buildbots..
Building optionrom/multiboot.img
ld: multiboot.o: relocation R_X86_64_16 can not be used when making a shared object; recompile with -fPIC
Signed-off by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The second half register of a 64-bit temp on a 32-bit host
was allocated with the wrong base_type.
The base_type of the second half register is never checked,
but for consistency it should be the same as the first half.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since commit 999b53ec87:
Author: Claudio Fontana <claudio.fontana@linaro.org>
Date: Wed Feb 5 17:27:28 2014 +0000
disas: Implement disassembly output for A64
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
disas/libvixl/ contains functions which uses 64bit constants
without using appropriate suffixes, which fails on 32bits.
Fix this by using ULL suffix.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
trivial patches for 2014-02-15
# gpg: Signature made Sat 15 Feb 2014 12:10:46 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838
* remotes/mjt/tags/trivial-patches-2014-02-15:
char/serial: Fix emptyness check
gitignore: anchor all ignored names
vl: trim includes
vl: remove old, long-unused defines
net: declare struct iovec in checksum.h to fix compiler warning
linux-user: refactor do_socketcall()
configure: add hints to a remedy for feature_not_found errors
configure: add hint of libfdt to DTC dependency not found message
sparc/leon3: Initialize stack pointer
misc: Fix case Qemu -> QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block pull request
# gpg: Signature made Fri 14 Feb 2014 17:26:30 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
block: Open by reference will try device then node_name.
block: Relax bdrv_lookup_bs constraints.
blockdev: Fix wrong usage of QDECREF causing snapshoted quorum to crash on close.
block: mirror - use local_err to avoid NULL errp
qemu-iotests: Don't run 005 on vmdk split formats
block: qemu-iotests - add vhdx log replay tests for qemu-img
block: qemu-iotests - fix test 070 (vhdx)
block: Don't throw away errno via error_setg
block: Add notes to iSCSI's .bdrv_open and .bdrv_reopen_prepare
blockdev: Remove 'type' parameter from blockdev_init()
sdhci: Drop unnecessary #include
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/jovanovic/mips-ufrp:
target-mips: add user-mode FR switch support for MIPS32r5
target-mips: add support for CP0_Config5
target-mips: add support for CP0_Config4
target-mips: add CPU definition for MIPS32R5
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
by default, patterns/names in .gitignore are applied
recursively to all subdirectories. So any name mentioned
in .gitignore is ignored in all subdirectores. This is good
for, say. object files (*.o), but not good for particular
names which should be ignored only in one directory. For
example, qemu-img.1 file is generated in the top directory,
and it should be ignored only there, not in some subdir.
At first, this might not matter much, but we have lots of
examples already where it actually does not help at all.
For example, top-level .gitignore ignores a file/dir named
"patches" (which is very questionable by itself), but it
is applied recursively, so git also ignores, for example,
debian/patches/ which should not be ignored.
So anchor all the names where appropriate. .gitignore
should be cleaned up further, which will be addressed in
a subsequent patch.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Over time, lots of stuff moved from vl.c into separate
files. But include statements has never been cleaned,
and they continue to carry lots of anymore-unused stuff.
Remove includes which are not relevant for vl.c anymore.
Apparently there are more includes like this, because
many are included from qemu-common.h and the like, or,
for example, I don't see were we use win32-specific
stuff in vl.c (so that maybe #include <windows.h> might
be removed too).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The checksum calculation header exports a function that refers to
struct iov defined in iov.h. Without including the former, build
fails like this:
In file included from hw/net/fsl_etsec/rings.c:24:0:
include/net/checksum.h:51:31: error: ‘struct iovec’ declared inside parameter list [-Werror]
include/net/checksum.h:51:31: error: its scope is only this definition or declaration, which is probably not what you want [-Werror]
Mention struct iovec there.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Refactor do_socketcall() to do argument conversion/checking first,
according to a lookup table (which call has how many args) and
by calling the right function second with ready-to-go arguments.
This ensures that all arguments are handled as abi_long, according
to socketcall prototype, and simplifies argument handling alot too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Modify feature_not_found to accept an optional second parameter to be
printed after the generic feature not found error.
Modify most calls to feature_not_found to provide hints as to the
packages that may be missing. The few calls remaining without a remedy
are ones I couldn't work out how to remedy myself.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most distros package it as libfdt, and mentioning libfdt here makes it
much easier to find the package you're missing.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A lot of real world LEON3 systems are shipped with the GRMON boot
loader. This boot loader initializes the stack pointer with the end of
RAM address. The application can use this to detect the RAM size of a
particular board variant.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes several bugs or shortcomings of the previous pretty-printer.
In particular:
* use PRIu64 instead of casting to long long
* the exact value is included too
* the correct unit of measure (MiB, GiB, etc.) is used. PiB and EiB
are added too.
* due to an off-by-one error, 512*2^30 was printed as 0.500MiB rather than
512MiB. floor(log2(val)) is equal to 63 - clz(val), while the code used 64.
* The desired specification is %g rather than %f, which always uses three
decimals in the current code. However %g would switch to scientific
notation when the integer part is >= 1000 (e.g. 1000*2^30). To keep the
code simple, switch to the higher power when the integer part is >= 1000;
overflow is avoided by using frexp instead of clz.
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Sure, CHS translation is an obscure topic, and legacy options for
hard-disk geometries are obscure as well. But since QEMU does nothing
with it except telling the BIOS, and since there "large" and "rechs"
are listed in the enums, parsing them seems to be the bare minimum.
Acked-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Their functionality is either aesthetic only (e.g. on/off vs. true/false)
or obtained by the "human mode" of StringOutputVisitor.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will be used by "info qtree". For numbers it prints both the
decimal and hex values. For sizes it rounds to the nearest power
of 2^10. For strings, it puts quotes around the string and separates
NULL and empty string.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The hexNN property types have not been accepting values not prefixed
by "0x" since QEMU 1.2. Parse those values as decimals now.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This prints an error message, instead of core dump, when "-qtest"
option value is invalid, e.g.:
$ ./x86_64-softmmu/qemu-system-x86_64 -qtest unknown
qemu-system-x86_64: Failed to initialize device for qtest:
"unknown"
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move the header defining an IPackBus and IPackDevice base class into
a new include/ directory and move their implementation and a
PCI-IndustryPack bridge out of hw/char/ directory into a new hw/ipack/.
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Clean up accesses to IPOctalState::dev field and rename it.
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rename the IPackDevice::qdev field to avoid accidental use.
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Clean up the only user of IPackBus::qbus field and rename it.
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since we introduced node_name for named bs of the graph modify the opening by
reference to use it as a fallback.
This patch also enforce the separation of the device id and graph node
namespaces.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following patch will reuse bdrv_lookup_bs in order to open images by
references so the rules of usage of bdrv_lookup_bs must be relaxed a bit.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As bdrv_open() documentation states:
"The reference to the QDict belongs to the block layer
* after the call (even on failure), so if the caller intends to reuse the
* dictionary, it needs to use QINCREF() before calling bdrv_open."
the optional options dict will not be reused after bdrv_open() and should
belong to the block layer so remove the extra QDECREF(options).
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When starting a block job, commit_active_start() relies on whether *errp
is set by mirror_start_job. This allows it to determine if the mirror
job start failed, so that it can clean up any changes to open flags from
the bdrv_reopen(). If errp is NULL, then it will not be able to
determine if mirror_start_job failed or not.
To avoid this, use a local Error variable, and then propagate the error
(if any) to errp.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There would be too many extents that VMDK driver can't open all of them:
005 0s ... - output mismatch (see 005.out.bad)
--- 005.out 2013-12-24 09:27:27.608181030 +0800
+++ 005.out.bad 2014-02-13 10:00:15.282184557 +0800
@@ -4,10 +4,10 @@
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=5368709120000
small read
-read 4096/4096 bytes at offset 1024
-4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-io: can't open device /tmp/qemu-iotests/t.vmdk: Could not open '/tmp/qemu-iotests/t-s1016.vmdk': Too many open files
+no file open, try 'help open'
small write
-wrote 4096/4096 bytes at offset 8192
-4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-io: can't open device /tmp/qemu-iotests/t.vmdk: Could not open '/tmp/qemu-iotests/t-s1016.vmdk': Too many open files
+no file open, try 'help open'
*** done
So disable the two subformats.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VHDX logs can now be replayed via 'qemu-img check -r all'. Add
tests to verify that the log replay is successful when using qemu-img.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VHDX test 070 failed, due to different output from qemu-io / qemu
when opening an image read-only that contains a log file. Filter
the output, and update the expected results to match the correct
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are a handful of places in the block layer where a failure path
has a valid -errno value, yet error_setg() is used. Those instances
should instead use error_setg_errno(), to preserve as much error
information as possible.
This patch replaces those instances with error_setg_errno(), so that
errno is passed up the stack in the error message.
Reported-By: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that this will emit a warning:
[vmxnet3][WR][vmxnet3_peer_has_vnet_hdr]: Peer has no virtio extension.
Task offloads will be emulated.
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() and direct parent field accesses with
QOM cast macro. Rename parent field.
Add missing braces while at it.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() with QOM cast macro.
Rename parent field.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() and direct parent field accesses with
QOM cast macro. Rename parent field.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() with QOM cast macro.
Rename parent field.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() and direct parent field accesses with
QOM cast macro. Rename parent field.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() with QOM cast macro.
Rename the parent field. Reuse the type constant in z2_init().
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Use TYPE_AER915 in z2_init() too]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() with QOM cast macro.
Rename parent field. Use type constant in tosa_tg_init().
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() and direct parent field accesses with
QOM cast macro. Rename parent field to assure we caught all. Reuse type
constant in pxa2xx_i2c_init().
Add some missing braces while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 7426aa72c3 (nand: Don't inherit
from Sysbus) changed the parent type of TYPE_NAND but continued to use
qdev_create(), which handled a NULL BusState as SysBus.
Use object_new() instead, and reuse the TYPE_NAND define while at it.
Reported-by: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rather than requiring every new architecture to remember to add a line
to the Makefile to say that qom-test will work on it, autogenerate
the list of supported architectures by looking at the files in
default-configs (as configure does), and add qom-test to the
test list for all of them automatically.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Get available machines via QMP instead of hardcoding a list that's
perpetually out of date.
Xen machines can work only when running under the Xen hypervisor.
Blacklist them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
iSCSI currently does not need to do any actions to support the
current usage of bdrv_reopen(). However, it is important to note
a couple of things: 1.) A connection will not be re-established to
an iSCSI target, and 2.) If iscsi_open() is changed to parse 'flags',
then iscsi_reopen_prepare() may need to be more than a stub.
In light of the above, this commit adds comments above both of the
functions to bring attention to these facts.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
blockdev-add doesn't know about the device that the backend will be
attached to, this is a legacy -drive concept. Move the remaining checks
that use it to drive_init().
[Fam Zheng <famz@redhat.com> suggested line-wrapping to 80 chars as
required by the coding standard. I have fixed this.
--Stefan]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We now have to pass an address space to our _phys helpers. During the
transition apparently the EPR exit path missed out, so let's put it there.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not only 44x CPUs (BookE) but also 40x CPUs can run with 1k page size.
Move the criteria to a central inline function to avoid repetition
and #ifdef'fery. Update qom-test to no longer exempt them.
Signed-off-by: Andreas Färber <afaerber@suse.de>
qtest driver always uses signals to kill qemu
no need to report it, whatever the accelerator state.
Add API to detect qtest driver, and suppress reporting
signals in this case.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
acpi,pc,pci fixes and enhancements
Most changes here are hotplug related:
This merges hotplug infrastructure changes by Igor,
some acpi related fixes, and PC fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 10 Feb 2014 09:13:26 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
ACPI: Remove commented-out code from HPET._CRS
hw/pci: switch to a generic hotplug handling for PCIDevice
pci/pcie: convert PCIE hotplug to use hotplug-handler API
pci/shpc: convert SHPC hotplug to use hotplug-handler API
acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API
qdev:pci: refactor PCIDevice to use generic "hotpluggable" property
hw/acpi: move typeinfo to the file end
qdev: add "hotpluggable" property to Device
qdev: add to BusState "hotplug-handler" link
define hotplug interface
loader: document that errno is set
pc.c: better error message on initrd sizing failure
pc_piix: enable legacy hotplug for Xen
qtest: don't report signals if qtest driver enabled
hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug
pcihp: remove unused AcpiPciHpPciStatus.device_present field
pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug
pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR
pcihp: replace enable|disable_device() with oneliners
pcihp: reduce number of device check events
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PReP machine and devices
* Cleanups for Raven PCI host bridge
* Removal of PReP machine and devices from qemu-system-ppcemb
# gpg: Signature made Mon 10 Feb 2014 16:19:03 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/prep-for-upstream:
prep: Drop from ppcemb-softmmu
raven: Use constant PCI_NUM_PINS instead of 4
prep: Kill get_system_io() usage
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/alon/pull-libcacard.glusterfs:
libcacard: Don't link with all libraries QEMU links to
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block patches
# gpg: Signature made Sun 09 Feb 2014 08:12:51 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-anthony:
block: Fix 32 bit truncation in mark_request_serialising()
blkdebug: Don't leak bs->file on failure
block: Don't call ROUND_UP with negative values
block: bdrv_aligned_pwritev: Assert overlap range
block: Fix memory leaks in bdrv_co_do_pwritev()
raw: Fix BlockLimits passthrough
qemu-iotests: add test for qcow2 preallocation with different cluster sizes
qcow2: check for NULL l2meta
qcow2: fix offset overflow in qcow2_alloc_clusters_at()
qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset()
block/iscsi: always fill bs->bl.opt_transfer_length
block: Fail gracefully with missing filename
qemu-iotests: enable support for NFS protocol
qemu-iotests: enable test 016 and 025 to work with NFS protocol
qemu-iotests: blacklist test 020 for NFS protocol
qemu-iotests: change _supported_proto to file for various tests
block: add native support for NFS
qemu-iotest: Make 077 raw-only
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is to allow future patches to set properties before cpu::realize().
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
target-arm queue:
* more A64 Neon instructions
* AArch32 VCVTB and VCVTT ARMv8 instructions
* fixes to inaccuracies in GIC emulation
* libvixl disassembler for A64
* Allwinner SoC ethernet controller
* zynq software system reset support
# gpg: Signature made Sat 08 Feb 2014 15:53:05 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140208: (29 commits)
arm/zynq: Add software system reset via SCLR
hw/arm/allwinner-a10: initialize EMAC
hw/net: add support for Allwinner EMAC Fast Ethernet controller
util/fifo8: clear fifo head upon reset
util/fifo8: implement push/pop of multiple bytes
disas: Implement disassembly output for A64
disas/libvixl: Fix upstream libvixl compilation issues
disas: Add subset of libvixl sources for A64 disassembler
rules.mak: Link with C++ if we have a C++ compiler
rules.mak: Support .cc as a C++ source file suffix
arm_gic: Add GICC_APRn state to the GICState
vmstate: Add uint32 2D-array support
arm_gic: Support setting/getting binary point reg
arm_gic: Keep track of SGI sources
arm_gic: Fix GIC pending behavior
target-arm: Add support for AArch32 64bit VCVTB and VCVTT
target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group
target-arm: A64: Add 2-reg-misc REV* instructions
target-arm: A64: Add narrowing 2-reg-misc instructions
target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/kvaneesh/for-upstream:
hw/9pfs: fix P9_STATS_GEN handling
hw/9pfs: make get_st_gen() return ENOTTY error on special files
hw/9pfs: handle undefined FS_IOC_GETVERSION case in handle_ioc_getversion()
hw/9pfs: fix error handing in local_ioc_getversion()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 360e607 (address_space_translate: do not cross page boundaries,
2014-01-30) broke MMIO accesses in cases where the section is shorter
than the full register width. This can happen for example with the
Bochs DISPI registers, which are 16 bits wide but have only a 1-byte
long MemoryRegion (if you write to the "second byte" of the register
your access is discarded; it doesn't write only to half of the register).
Restrict the action of commit 360e607 to direct RAM accesses. This
is enough for Xen, since MMIO will not go through the mapcache.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Description of UFR feature:
Required in MIPS32r5 if floating point is implemented and user-mode FR
switching is supported. The UFR register allows user-mode to clear StatusFR
by executing a CTC1 to UFR with GPR[0] as input, and read StatusFR by
executing a CFC1 to UFR.
helper_ctc1 has been extended with an additional parameter rt to check
requirements for UFR feature.
Definition of mips32r5-generic has been modified to include support for UFR.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
Add mips32r5-generic among CPU definitions for MIPS.
Define ISA_MIPS32R3 and ISA_MIPS32R5.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
IRQNoFlags on HPET._CRS crashes WinXP because it causes the HPET
to conflict with the system timer and/or the RTC. It only occurs
on Apple hardware, and even there it is exposed fully only when
OS X is detected (via _OSI). Recent OS X versions work on QEMU
without this statement, so at this time there is no need to find
a better way to conditionally include the statement. This patch
removes the commented out (and wrong, should have been {0, 8})
statement from HPET._CRS.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
make qdev_unplug()/device_set_realized() to call hotplug handler's
plug/unplug methods if available and remove not needed anymore
hot(un)plug handling from PCIDevice.
In case if hotplug handler is not available, revert to the legacy
hotplug method for compatibility with not yet converted buses.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split pcie_cap_slot_hotplug() into hotplug/unplug callbacks
and register them as "hotplug-handler" interface implementation of
PCIE_SLOT device.
Replace pci_bus_hotplug() wiring with setting link on PCI BUS
"hotplug-handler" property to PCI_BRIDGE_DEV device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split shpc_device_hotplug() into hotplug/unplug callbacks
and register them as "hotplug-handler" interface implementation of
PCI_BRIDGE_DEV device.
Replace pci_bus_hotplug() wiring with setting link on PCI BUS
"hotplug-handler" property to PCI_BRIDGE_DEV device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split piix4_device_hotplug() into hotplug/unplug callbacks
and register them as "hotplug-handler" interface implementation of
PIIX4_PM device.
Replace pci_bus_hotplug() wiring with setting link on
PCI BUS "hotplug-handler" property to PIIX4_PM device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use
generic DeviceClass.hotpluggable field instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
do so to avoid not necessary forward declarations and
place typeinfo registration at the file end where it's
usually expected.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently it's possible to make PCIDevice not hotpluggable
by using no_hotplug field of PCIDeviceClass. However it
limits this only to PCI devices and prevents from
generalizing hotplug code.
So add similar field to DeviceClass so it could be reused
with other Devices and would allow to replace PCI specific
hotplug callbacks with generic implementation. Following
patches will replace PCIDeviceClass.no_hotplug with this
new property.
In addition expose field as "hotpluggable" readonly property,
to make it possible to read its value via QOM interface.
Make DeviceClass hotpluggable by default as it was assumed
before.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will allow to reuse field with different BUSes,
reducing code duplication. Field is intended for
replacing 'hotplug_qdev' field in PCIBus and also
will allow to avoid adding equivalent field to
DimmBus with possiblitity to refactor other BUSes
to use it instead of custom field.
In addition once all users of allow_hotplug field
are converted to new API, link could replace
allow_hotplug field in qdev hotplug code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a generic hotplug interface for hotplug handlers.
Intended for replacing hotplug mechanism used by
PCI/PCIE/SHPC code and will be used for memory hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While ISA address space in prep machine is currently the one returned
by get_system_io(), this depends of the implementation of i82378/raven
devices, and this may not be the case forever.
Use the right ISA address space when adding some more ports to it.
We can use whatever ISA device on the right ISA bus, as all ISA devices
on the same ISA bus share the same ISA address space.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
As described in https://bugzilla.redhat.com/show_bug.cgi?id=987441 ,
libcacard currently links to all the libraries QEMU is linking to,
including glusterfs libraries, libiscsi, ... libcacard does not need all of
these. This patch ensures it's only linked with the libraries it needs.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Alon Levy <alevy@redhat.com>
On 32 bit hosts, size_t is too small for align as the bitmask
~(align - 1) will zero out the higher 32 bits of the offset.
While at it, change the local overlap_bytes variable to unsigned to
match the field in BdrvTrackedRequest.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The behaviour of the ROUND_UP macro with negative numbers isn't obvious.
It happens to do the right thing in this please, but better avoid it.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This adds assertions that the request that we actually end up passing to
the block driver (which includes RMW data and has therefore potentially
been rounded to alignment boundaries) is fully covered by the
overlap_{offset,size} fields of the associated BdrvTrackedRequest.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The error path for a failure in one of the two bdrv_aligned_preadv()
calls leaked head_buf or tail_buf, respectively. This fixes the memory
leak.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
raw copies over the BlockLimits of bs->file during bdrv_open().
However, since commit d34682cd it is immediately overwritten during
bdrv_refresh_limits(). This caused all fields except for
opt_transfer_length and opt_mem_alignment (which happen to be correctly
inherited in generic code) to be zeroed.
Move the BlockLimit assignment to a .bdrv_refresh_limits() callback to
make it work again for all fields.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In the case of a metadata preallocation with a large cluster size,
qcow2_alloc_cluster_offset() can allocate nothing and returns a
NULL l2meta. This patch checks for it and link2 l2 with only valid
l2meta.
Replace 9 and 512 with BDRV_SECTOR_BITS, BDRV_SECTOR_SIZE
respectively while at the function.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When cluster size is big enough it can lead to an offset overflow
in qcow2_alloc_clusters_at(). This patch fixes it.
The allocation is stopped each time at L2 table boundary
(see handle_alloc()), so the possible maximum bytes could be
2^(cluster_bits - 3 + cluster_bits)
cluster_bits - 3 is used to compute the number of entry by L2
and the additional cluster_bits is to take into account each
clusters referenced by the L2 entries.
so int is safe for cluster_bits<=17, unsafe otherwise.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
n_start can be actually calculated from offset. The number of
sectors to be allocated(n_end - n_start) can be passed in in
num. By removing n_start and n_end, we can save two parameters.
The side effect is there is a bug in qcow2.c:preallocate() that
passes incorrect n_start to qcow2_alloc_cluster_offset() is
fixed. The bug can be triggerred by a larger cluster size than
the default value(65536), for example:
./qemu-img create -f qcow2 \
-o 'cluster_size=131072,preallocation=metadata' file.img 4G
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the opt_transfer_length has nothing to do with logical
block provisioning stuff so always copy it from
the block limits VPD page.
Reported-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a regression introduced in commit 2a05cbe42 ('block: Allow
block devices without files'):
$ qemu-system-x86_64 -drive driver=file
qemu-system-x86_64: block.c:892: bdrv_open_common: Assertion
`!drv->bdrv_needs_filename || filename != ((void *)0)' failed.
Now the respective check must be performed not only in bdrv_file_open(),
but also in bdrv_open().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
all these tests do anything of the following and thus fail with any
protocol other than file:
- the tests use rm, cp or mv shell commands which only work on file
- the tests use qcow2.py
- the images construct new filenames (e.g. backing file names) and
the logic is broken for anything else than file
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds native support for accessing images on NFS
shares without the requirement to actually mount the entire
NFS share on the host.
NFS Images can simply be specified by an url of the form:
nfs://<host>/<export>/<filename>[?param=value[¶m2=value2[&...]]]
For example:
qemu-img create -f qcow2 nfs://10.0.0.1/qemu-images/test.qcow2
You need LibNFS from Ronnie Sahlberg available at:
git://github.com/sahlberg/libnfs.git
for this to work.
During configure it is automatically probed for libnfs and support
is enabled on-the-fly. You can forbid or enforce libnfs support
with --disable-libnfs or --enable-libnfs respectively.
Due to NFS restrictions you might need to execute your binaries
as root, allow them to open priviledged ports (<1024) or specify
insecure option on the NFS server.
For additional information on ROOT vs. non-ROOT operation and URL
format + parameters see:
https://raw.github.com/sahlberg/libnfs/master/README
Supported by qemu are the uid, gid and tcp-syncnt URL parameters.
LibNFS currently support NFS version 3 only.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qemu-io command sequences make the assumption that an unaligned
request on the format layer will be unaligned on the blkdebug layer as
well. This doesn't necessarily hold true for drivers other than raw.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
target-lm32: fixes
# gpg: Signature made Tue 04 Feb 2014 18:47:56 GMT using DSA key ID 3F98A378
# gpg: Can't check signature: public key not found
* remotes/mwalle/tags/lm32-fixes/20140204:
hw/lm32: print error if cpu model is not found
target-lm32: stop VM on illegal or unknown instruction
lm32_sys: dump cpu state if test case fails
lm32_sys: print test result on stderr
target-lm32: add breakpoint/watchpoint support
target-lm32: move model features to LM32CPU
target-lm32: kill cpu_abort() calls
milkymist-vgafb: swap pixel data in source buffer
lm32_uart/lm32_juart: use qemu_chr_fe_write_all()
milkymist-uart: use qemu_chr_fe_write_all() instead of qemu_chr_fe_write()
tests: lm32: new rule for single test cases
lm32_sys: increase test case name length limit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for the Fast Ethernet MAC found on Allwinner
SoCs, together with a basic emulation of Realtek RTL8201CP PHY.
Since there is no public documentation of the Allwinner controller, the
implementation is based on Linux kernel driver.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To improve the predictability of fifo8_pop_buf(), the fifo head is set
to the start of data buffer upon a reset so that the first call to the
function will be able to retrieve all data in the fifo.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patch adds functions fifo8_push_all() and fifo8_pop_buf() which
can be used respectively to push the content of a memory buffer to the
fifo and to pop multiple bytes obtaining a pointer to the fifo backing
buffer.
In addition, it implements fifo8_num_free() and fifo8_num_used() which
allow to check if a multi-byte operation can be performed.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM:
* added support for target disassembly
* switched to custom QEMUDisassembler so the output format
matches what QEMU expects
* make sure we correctly fall back to "just print hex"
if we didn't build the AArch64 disassembler because of
lack of a C++ compiler
* rename from 'aarch64' to 'arm-a64' because this is a
disassembler for the A64 instruction set
* merge aarch64.c and aarch64-cxx.cc into one C++ file
* simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix various minor issues with upstream libvixl so that it will compile
successfully on the platforms QEMU cares about:
* remove unused GBytes constant (it clashes with the glib headers)
* fix suffixes on constants to use 'LL' for 64 bit constants so
we can compile on 32 bit hosts
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the subset of the libvixl sources that are needed for the
A64 disassembler support. These sources come from
https://github.com/armvixl/vixl commit 578645f14e122d2b
which is VIXL release 1.1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
If we have a C++ compiler available, link with it, because we might be
linking some C++ files in. This allows us to include C++ object files
in the QEMU binary proper.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The A64 disassembler libvixl uses .cc as its suffix for
C++ source files, so add support for it (we already support
.cpp).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The GICC_APRn registers are not currently supported by the ARM GIC v2.0
emulation. This patch adds the missing state.
Note that we also change the number of APRs to use a define GIC_NR_APRS
based on the maximum number of preemption levels. This patch also adds
RAZ/WI accessors for the four registers on the emulated CPU interface.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a binary_point field to the gic emulation structure and support
setting/getting this register now when we have it. We don't actually
support interrupt grouping yet, oh well.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Right now the arm gic emulation doesn't keep track of the source of an
SGI (which apparently Linux guests don't use, or they're fine with
assuming CPU 0 always).
Add the necessary matrix on the GICState structure and maintain the data
when setting and clearing the pending state of an IRQ and make the state
visible to the guest.
Note that we always choose to present the source as the lowest-numbered
CPU in case multiple cores have signalled the same SGI number to a core
on the system.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The existing implementation of the pending behavior in gic_set_irq,
gic_complete_irq, and the distributor pending set/clear registers does
not follow the semantics of the GICv2.0 specs, but may implement the
11MPCore support. Therefore, maintain the existing semantics for
11MPCore and v7M NVIC and change the behavior to be in accordance with
the GICv2.0 specs for "generic implementations" (s->revision == 1 ||
s->revision == 2).
Generic implementations distinguish between setting a level-triggered
interrupt pending through writes to the GICD_ISPENDR and when hardware
raises the interrupt line. Writing to the GICD_ICPENDR will not cause
the interrupt to become non-pending if the line is still active, and
conversely, if the line is deactivated but the interrupt is marked as
pending through a write to GICD_ISPENDR, the interrupt remains pending.
Handle this situation in the GIC_TEST_PENDING (which now becomes a
static inline named gic_test_pending) and let the 'pending' field
correspond only to the latched state of the D-flip flop in the GICv2.0
specs Figure 4-10.
The following changes are added:
gic_test_pending:
Make this a static inline and split out the 11MPCore from the generic
behavior. For the generic behavior, consider interrupts pending if:
((s->irq_state[irq].pending & (cm) != 0) ||
(!GIC_TEST_EDGE_TRIGGER(irq) && GIC_TEST_LEVEL(irq, cm))
gic_set_irq:
Split out the 11MPCore from the generic behavior. For the generic
behavior, always GIC_SET_LEVEL() on positive level, but only
GIC_SET_PENDING for edge-triggered interrupts and always simply
GIC_CLEAR_LEVEL() on negative level.
gic_complete_irq:
Only resample the line for line-triggered interrupts on an 11MPCore.
Generic implementations will sample the line directly in
gic_test_pending().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point half-precision to double-
precision conversion VCVTB and VCVTT instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: fixed a minor missing-braces style issue]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the SIMD FNEG and FABS instructions in the SIMD 2-reg-misc group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the narrowing integer instructions in the 2-reg-misc class.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the 2-reg-misc CNT, NOT and RBIT instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the simple 2-register-misc operations we can share
with the scalar-two-register-misc code. (SUQADD, USQADD, SQABS,
SQNEG also fall into this category, but aren't implemented in
the scalar-2-register case yet either.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add a skeleton decode for the SIMD 2-reg misc group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the simple 64 bit integer operations from the SIMD
scalar 2-register misc group (C3.6.12): the comparisons against
zero, plus ABS and NEG.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the instructions in the scalar pairwise group (C3.6.8).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We have macros for marking TCGv values as unused, checking if they
are unused and comparing them to each other. However these only exist
for TCGv_i32 and TCGv_i64; add them for TCGv_ptr as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the pairwise integer operations in the 3-reg-same SIMD group:
ADDP, SMAXP, SMINP, UMAXP and UMINP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the SIMD 3-reg-same instructions where the size == 3 case
is reserved: SHADD, UHADD, SRHADD, URHADD, SHSUB, UHSUB, SMAX,
UMAX, SMIN, UMIN, SABD, UABD, SABA, UABA, MLA, MLS, MUL, PMUL,
SQRDMULH, SQDMULH. (None of these have scalar-3-same versions.)
This completes the non-pairwise integer instructions in this category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the SIMD 3-reg-same instructions SQADD, UQADD,
SQSUB, UQSUB, SSHL, USHL, SQSHl, UQSHL, SRSHL, URSHL,
SQRSHL, UQRSHL; these are all simple calls to existing
Neon helpers. We also enable SSHL, USHL, SRSHL and URSHL
for the 3-reg-same-scalar category (but not the others
because they can have non-size-64 operands and the
scalar_3reg_same function doesn't support that yet.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
migration/next for 20140204
# gpg: Signature made Tue 04 Feb 2014 15:52:00 GMT using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20140204-1:
Don't abort on memory allocation error
Don't abort on out of memory when creating page cache
XBZRLE cache size should not be larger than guest memory size
migration:fix free XBZRLE decoded_buf wrong
Add check for cache size smaller than page size
Set xbzrle buffers to NULL after freeing them to avoid double free errors
exec: fix ram_list dirty map optimization
vmstate: Make VMSTATE_STRUCT_POINTER take type, not ptr-to-type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qtest resource cleanup patches
# gpg: Signature made Tue 04 Feb 2014 08:29:12 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/qtest-for-peter:
qtest: unlink UNIX domain sockets after connecting
qtest: unlink QEMU pid file after startup
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/kvm/uq/master:
target-i386: Move KVM default-vendor hack to instance_init
target-i386: Don't change x86_def_t struct on cpu_x86_register()
target-i386: Eliminate CONFIG_KVM #ifdefs
kvm: add support for hyper-v timers
kvm: make hyperv vapic assist page migratable
kvm: make hyperv hypercall and guest os id MSRs migratable.
kvm: make availability of Hyper-V enlightenments dependent on KVM_CAP_HYPERV
KVM: fix coexistence of KVM and Hyper-V leaves
kvm: print suberror on all internal errors
target-i386: kvm_check_features_against_host(): Kill feature word array
target-i386: kvm_cpu_fill_host(): Fill feature words in a loop
target-i386: kvm_cpu_fill_host(): Set all feature words at end of function
target-i386: kvm_cpu_fill_host(): No need to check xlevel2
target-i386: kvm_cpu_fill_host(): No need to check CPU vendor
target-i386: kvm_cpu_fill_host(): No need to check level
target-i386: kvm_cpu_fill_host(): Kill unused code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
misc spice patches
# gpg: Signature made Mon 03 Feb 2014 15:05:29 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/spice/tags/pull-spice-2:
spice: hook qemu_chr_fe_set_open() event to ports
Add the ability to vary Spice playback and record rates, to facilitate Opus support.
hw/display/qxl: fix signed to unsigned comparison
qxl: clear irq on reset
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
trivial patches for 2014-02-02
# gpg: Signature made Sun 02 Feb 2014 16:11:37 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838
* remotes/mjt/tags/trivial-patches-2014-02-02:
tests/.gitignore: Ignore tests/check-qom-interface
hw/ppc: Remove unused defines
readline: Add missing GCC_FMT_ATTR
tcg/s390: Remove sigill_handler
i386: Add missing include file for QEMU_PACKED
osdep: drop unused #include "trace.h"
qemu 1.7.0 does not build on NetBSD
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block pull request
# gpg: Signature made Fri 31 Jan 2014 21:16:43 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
qemu-iotests: only run 071 on qcow2
dataplane: Comment fix
block/vhdx: Error checking fixes
qemu-iotests: Drop assert_no_active_commit in case 040
block/vmdk: add basic .bdrv_check support
block: remove qcow2 .bdrv_make_empty implementation
block: remove QED .bdrv_make_empty implementation
Describe flaws in qcow/qcow2 encryption in the docs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
xenfv has no fwcfg and so does not load acpi from QEMU.
as such new acpi features don't work.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qtest driver always uses signals to kill qemu
no need to report it, whatever the accelerator state.
Add API to detect qtest driver, and suppress reporting
signals in this case.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
reduces acpi PCI hotplug code duplication by ~200LOC
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove now unused 'device_present' field wich was obsoleted by
patch "pcihp: reduce number of device check events"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
due to recent change introduced by:
"pcihp: reduce number of device check events"
'up' field is cleared right after it's read.
This is incompatible with legacy BIOS ACPI code
where PCNF ACPI method reads this field 32 times.
To make pci_read mmio callback compatible with legacy
'up' behavior, pcihp code will need to know in which
mode it runs add 'legacy_piix' field to AcpiPciHpState
structure and alter register behavior accordingly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... removes dependency of mmio handler on PCI_HOTPLUG_ADDR.
It will be needed in case of Q35 where base could be different.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
enable_device() and disable_device() functions aren't reused anywere,
so replace them with respective oneliners at call sites.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIIX created a made-up value for the UP register since it was read by
guest 32 times for each interrupt.
There's no reason to do this for the new PCIHP: register is only read
once for each interrupt, so clean up code by making read act as an
interrupt acknowledgement: the new UP register clear on read.
In this way we cut down the number of bus rescans
by a factor of 32, and drop a bunch of code that's
now unused.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of translating the instruction to a no-op, pause the VM and display
a message to the user.
As a side effect, this also works for instructions where the operands are
only known at runtime.
Signed-off-by: Michael Walle <michael@walle.cc>
This patch set contains the sclp defines and events for cpu hotplug,
the initial sclp defines (without code yet) for standby memory (some
sort of memory hotplug) as well as a cleanup of the kvm register
synchronization.
# gpg: Signature made Fri 31 Jan 2014 08:54:29 GMT using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found
* remotes/borntraeger/tags/kvm-s390-20140131:
s390x/kvm: cleanup partial register handling
sclp-s390: Define new SCLP codes and structures
s390-sclp: SCLP Event integration
s390-sclp: SCLP CPU Info
s390-sclp: Define New SCLP Codes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows us to completely remove CPULM32State from DisasContext.
Instead, copy the fields we need to DisasContext.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Walle <michael@walle.cc>
Instead of killing QEMU, translate instructions which are not available on
the CPU model as a noop and issue a log message at translation time.
On the real hardware CPU unknown opcodes results in undefined behaviour.
These changes prepare the removal of CPULM32State from DisasContext.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andreas Färber <afaerber@suse.de>
In commit fc97bb5ba3 the lduw_raw() call was
eliminated. But we are reading from the target buffer a 16-bit value, which
is in big-endian format. Therefore, use lduw_be_p() to read the value.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Walle <michael@walle.cc>
qemu_chr_fe_write() may return EAGAIN. Therefore, use
qemu_chr_fe_write_all().
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Introduce new target "check_%" to run individual test caes, eg.
make check_mmu
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
It is better to fail migration in case of failure to
allocate new cache item
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When qemu do live migration with xbzrle, qemu malloc decoded_buf
at destination end but free it at source end. It will crash qemu
by double free error in some scenarios. Splitting the XBZRLE structure
for clear logic distinguishing src/dst side.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: GongLei <arei.gonglei@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The ae2810c4bb patch introduced
optimization for ram_list.dirty_memory update. However it can only
work correctly if hpratio is 1 as the @bitmap parameter stores 1 bits
per system page size (may vary, 4K or 64K on PPC64) and
ram_list.dirty_memory stores 1 bit per TARGET_PAGE_SIZE
(which is hardcoded to 4K).
This fixes hpratio!=1 case to fall back to the slow path.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The VMSTATE_STRUCT_POINTER macros are a bit odd in that they
must be passed an argument "FooType *" rather than just taking
the FooType. They're only used in one place, so it's easy to
tidy this up. This also lets us use the macro to replace the
hand-rolled VMSTATE_PTIMER.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As we will not have a cpu_x86_find_by_name() function anymore,
move the KVM default-vendor hack to instance_init.
Unfortunately we can't move that code to class_init because it depends
on KVM being initialized.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As eventually the x86_def_t data is going to be provided by the CPU
class, it's better to not touch it, and handle the special cases on the
X86CPU object itself.
Current behavior of the code should stay exactly the same.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The compiler is already able to eliminate the kvm_arch_get_supported_cpuid()
calls in kvm_cpu_fill_host() and filter_features_for_kvm(), so we can
eliminate the CONFIG_KVM #ifdefs there.
Also, kvm_cpu_fill_host() and host_cpuid() don't need to check
CONFIG_KVM, as they don't have any KVM-specific function calls.
Tested to build successfully with CONFIG_KVM disabled, using the
following CFLAGS combinations: "-DNDEBUG", "-DNDEBUG -O', "-DNDEBUG
-O0", "-DNDEBUG -O1", "-DNDEBUG -O2".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MS docs specify HV_X64_MSR_HYPERCALL as a mandatory interface,
thus we must provide the MSRs even if the user only specified
features that, like relaxed timing, in principle don't require them.
And the MSRs are only there if the hypervisor has KVM_CAP_HYPERV.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_init_vcpu's initialization of the KVM leaves at 0x40000100
is broken, because KVM_CPUID_FEATURES is left at 0x40000001. Move
it to 0x40000101 if Hyper-V is enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM introduced internal error exit reason and suberror at the same time,
and later extended it with internal error data.
QEMU does not report suberror on hosts between these two events because
we check for the extension. (half a year in 2009, but it is misleading)
Fix by removing KVM_CAP_INTERNAL_ERROR_DATA condition on printf.
(partially improved by bb44e0d12d and ba4047cf84 in the past)
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need the ft[] array on kvm_check_features_against_host()
anymore, as we can simply use the feature_word_info[] array, that has
everything we need.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the kvm_cpu_fill_host() code is simplified, we can simply set
the feature word array using a simple loop.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reorder the code so all the code that sets x86_cpu_def->features is at
the end of the function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check CPU xlevel2 before calling
kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX), because:
* The kernel won't return any entry for 0xC0000000 if host CPU vendor
is not Centaur (See kvm_dev_ioctl_get_supported_cpuid() on the kernel
code)
* Similarly, the kernel won't return any entry for 0xC0000001 if
CPUID[0xC0000000].EAX is < 0xC0000001
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf
For similar reasons, we can simply set x86_cpu_def->xlevel2 directly
instead of making it conditional, because it will be set to 0 CPU vendor
is not Centaur.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[Remove unparseable comment. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check CPU vendor before calling
kvm_arch_get_supported_cpuid(s, 0xC0000000, 0, R_EAX), because:
* The kernel won't return any entry for 0xC0000000 if host CPU vendor
is not Centaur (See kvm_dev_ioctl_get_cpuid() on the kernel code);
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check level (CPUID[0].EAX) before calling
kvm_arch_get_supported_cpuid(s, 0x7, 0, R_EBX), because:
* The kernel won't return any entry for CPUID 7 if CPUID[0].EAX is < 7
on the host (See kvm_dev_ioctl_get_cpuid() on the kernel code);
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Those host_cpuid() calls are useless. They are leftovers from when the
old code using host_cpuid() was removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
UNIX domain sockets are leaked when tests call abort(3) (indirectly via
glib assert functions).
Unlink the files immediately after the connection has been established
to avoid leaks.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After starting the QEMU process and initializing the QMP connection, we
can read the pid file and unlink it.
Just stash away the pid instead of the pid filename. This way we can
avoid pid file leaks since running tests may abort(3) without cleanup.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Not that many changes as we already have a git snapshot pretty close
to final 1.7.4 in the tree. Most notably change is the vgabios change
which fixes the windows guest regression.
Full git shortlog:
Gerd Hoffmann (2):
run qemu_cfg_e820 only for CONFIG_QEMU=y
change boot order load log level
Kevin O'Connor (10):
Minor - move sgdt/lgdt macros from stacks.c to x86.h.
Separate out sec32init sections even when not doing code relocation.
floppy: Fix incorrect LBA to CHS translation.
floppy: Fix accesses to DOR register.
vgabios: Avoid memory references via %esp register in vgabios.
Small improvements to irqentry_extrastack assembler.
floppy: Encode command and flags into single value in floppy pio code.
On disk format request, verify cylinders and pass to driver.
floppy: Implement cylinder seeking when accessing a different cylinder.
coreboot: Make sure to print the SeaBIOS version in cbmem debug output.
Kyösti Mälkki (1):
Fix CBMEM console overflow
When using $(MAKE) within a makefile, we shouldn't be explicitly
including $(MAKEFLAGS) on the command-line. It causes problems
when that makefile is recursively invoked. When the roms/Makefile
is invoked as in make -C roms bios a spurious 'w' appears on the
sub-make invocation, due to the erroneous $(MAKEFLAGS) inclusion.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
__put_user can write bytes, words (2 bytes) or longwords (4 bytes).
Here obviously words should have been written, but bytes were written,
so values like 0x9c5f were truncated to 0x5f.
Fix this by changing retcode from uint8_t to to uint16_t in
target_signal_frame and also in the unused rt_signal_frame.
This problem was reported by static code analysis (smatch).
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This is an internal error as the CRISv10 should mask interrupts
while executing delay slots. Bail out sooner rather than later.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This wires up a spice port event on virtio-ports open/close, so the
client is notified when the other end is ready.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Several small signedness / overflow corrections to qxl_create_guest_primary:
1. use 64 bit unsigned for size to avoid overflow possible from two 32
bit multiplicants.
2. correct sign for requested_height
3. add a more verbose error message when setting guest bug state (which
causes a complete guess blackout until reset, so it helps if it is
verbose).
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without this we occasionally trigger an assert at
hw/pci/pci.c:pcibus_reset that asserts the irq_count is zero on reset.
This has become a problem with the new drm driver for linux, since doing
a reboot from console causes a race between console updates that set the
irq and the reset assertion that the irq is clear.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently we fail getattr request altogether if we can't read
P9_STATS_GEN for some reason. It breaks valid use cases:
E.g let's assume we have non-readable directory with execution bit set
on host and we export it to client over 9p On host we can chdir into
directory, but not open directory on read and list content.
But if client will try to call getattr (as part of chdir(2)) for the
directory it will fail with -EACCES. It happens because we try to open
the directory on read to call ioctl(FS_IOC_GETVERSION), it fails and we
return the error code to client.
It's excessive. The solution is to make P9_STATS_GEN failure non-fatal
for getattr request. Just don't set P9_STATS_GEN flag in result mask on
failure.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Currently we silently ignore getversion requests for anything except
file or directory. Let's instead return ENOTTY error to indicate that
getversion is not supported. It makes implementation consistent on
all not-supported cases.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
All get_st_gen() implementations except handle_ioc_getversion() have
guard for undefined FS_IOC_GETVERSION. Let's add it there too.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
target-arm queue:
* implementation of first part of the A64 Neon instruction set
* v8 AArch32 rounding and 16<->64 fp conversion instructions
* fix MIDR value on Zynq boards
* some minor bugfixes/code cleanups
# gpg: Signature made Fri 31 Jan 2014 15:06:34 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* pmaydell/tags/pull-target-arm-20140131: (34 commits)
arm_gic: Fix GICD_ICPENDR and GICD_ISPENDR writes
arm_gic: Introduce define for GIC_NR_SGIS
target-arm: A64: Add SIMD shift by immediate
target-arm: A64: Add simple SIMD 3-same floating point ops
target-arm: A64: Add integer ops from SIMD 3-same group
target-arm: A64: Add logic ops from SIMD 3 same group
target-arm: A64: Add top level decode for SIMD 3-same group
target-arm: A64: Add SIMD scalar 3 same add, sub and compare ops
target-arm: A64: Add SIMD three-different ABDL instructions
target-arm: A64: Add SIMD three-different multiply accumulate insns
target-arm: Add AArch32 SIMD VCVTA, VCVTN, VCVTP and VCVTM
target-arm: Add AArch32 FP VCVTA, VCVTN, VCVTP and VCVTM
target-arm: Add AArch32 SIMD VRINTA, VRINTN, VRINTP, VRINTM, VRINTZ
target-arm: Add set_neon_rmode helper
target-arm: Add support for AArch32 SIMD VRINTX
target-arm: Add support for AArch32 FP VRINTX
target-arm: Add support for AArch32 FP VRINTZ
target-arm: Add support for AArch32 FP VRINTR
target-arm: Add AArch32 FP VRINTA, VRINTN, VRINTP and VRINTM
target-arm: Move arm_rmode_to_sf to a shared location.
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vfio-pci updates include:
- Destroy MemoryRegions on device teardown
- Print warnings around PCI option ROM failures
- Skip bogus mappings from 64bit BAR sizing
- Act on DMA mapping failures
- Fix alignment to avoid MSI-X table mapping
- Fix debug macro typo
# gpg: Signature made Tue 28 Jan 2014 15:27:47 GMT using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found
* remotes/awilliam/tags/vfio-pci-for-qemu-20140128.0:
vfio: correct debug macro typo
vfio: fix mapping of MSIX bar
kvm: initialize qemu_host_page_size
vfio-pci: Fail initfn on DMA mapping errors
vfio: Filter out bogus mappings
vfio: Do not reattempt a failed rom read
vfio: warn if host device rom can't be read
vfio: Destroy memory regions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a compiler warning with -Werror=missing-format-attribute
and allows improved compiler checks for variable argument lists.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit c9baa30f42 failed to
delete all of the relevant code, leading to Werrors about
unused symbols.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Instead of packing BiosLinkerLoaderEntry, an unused global variable called
QEMU_PACKED was created (detected by smatch static code analysis).
Including qemu-common.h gets the right definition and also includes some
standard include files which now can be removed here.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
osdep.c does not use trace_*() so we can just drop the include.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Do not rely on int8_t (and friends) not being preprocessor
symbols (or symbols expanding to themselves). On NetBSD (for example) the
glue(u, SDATA_TYPE) results in u__int8_t, which is undefined. There is no way
to stop cpp expanding inner macros, so just add the few lines explicitly and
get rid of the magic.
Signed-off-by: Martin Husemann <martin@NetBSD.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 071 test is designed for IMGFMT=qcow2 because it uses the l2_load
blkdebug event. Its output filtering also assumes that IMGFMT is not
raw since 071.out contains "format=raw" but IMGFMT=raw would filter the
output to "format=IMGFMT".
Perhaps the test case can be rewritten to be more generic, but for now
let's document that it was only supposed to work with qcow2.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Errors are inadvertently ignored in a few places. Has always been
broken. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is exactly assert_no_active_block_jobs in iotests.py
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this adds a basic vmdk corruption check. it should detect severe
table corruptions and file truncation.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QCOW2 .bdrv_make_empty implementation always returns 0 for success,
but does not actually do anything.
The proper way to not support an optional driver function stub is to
just not implement it, so let's remove the stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QED .bdrv_make_empty() implementation does nothing but return
-ENOTSUP, which causes problems in bdrv_commit(). Since the function
stub exists for QED, it is called, which then always returns an error.
The proper way to not support an optional driver function stub is to
just not implement it, so let's remove the stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qemu-img.texi / qemu-doc.texi files currently describe the
qcow2/qcow2 encryption thus
"Encryption uses the AES format which is very secure (128 bit
keys). Use a long password (16 characters) to get maximum
protection."
While AES is indeed a strong encryption system, the way that
QCow/QCow2 use it results in a poor/weak encryption system.
Due to the use of predictable IVs, based on the sector number
extended to 128 bits, it is vulnerable to chosen plaintext
attacks which can reveal the existence of encrypted data.
The direct use of the user passphrase as the encryption key
also leads to an inability to change the passphrase of an
image. If passphrase is ever compromised the image data will
all be vulnerable, since it cannot be re-encrypted. The admin
has to clone the image files with a new passphrase and then
use a program like shred to secure erase all the old files.
Recommend against any use of QCow/QCow2 encryption, directing
users to dm-crypt / LUKS which can meet modern cryptography
best practices.
[Changed "Qcow" to "qcow" for consistency.
--Stefan]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This implements a subset of the AdvSIMD shift operations (namely all the
none saturating or narrowing ones). The actual shift generation code
itself is common for both the scalar and vector cases but wrapped with
either vector element iteration or the fp reg access.
The rounding operations need to take special care to correctly reflect
the result of adding rounding bits on high bits as the intermediates do
not truncate.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement a simple subset of the SIMD 3-same floating point
operations. This includes a common helper function used for both
scalar and vector ops; FABD is the only currently implemented
shared op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add some of the integer operations in the SIMD 3-same group:
specifically, the comparisons, addition and subtraction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the logical operations (ORR, AND, BIC, ORN, EOR, BSL,
BIT and BIF) from the SIMD 3 register same group (C3.6.16).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add top level decode for the A64 SIMD three regs same group
(C3.6.16), splitting it into the pairwise, logical, float and
integer subgroups.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the add, sub and compare ops from the SIMD "scalar three same"
group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the absolute-difference instructions in the SIMD
three-different group: SABAL, SABAL2, UABAL, UABAL2, SABDL,
SABDL2, UABDL, UABDL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the multiply-accumulate instructions from the
SIMD three-different instructions group (C3.6.15):
* skeleton decode of unallocated encodings and split of
the group into its three sub-parts
* framework for handling the 64x64->128 widening subpart
* implementation of the multiply-accumulate instructions
SMLAL, SMLAL2, UMLAL, UMLAL2, SMLSL, SMLSL2, UMLSL, UMLSL2,
UMULL, UMULL2, SMULL, SMULL2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the AArch32 Advanced SIMD VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 Advanced SIMD VRINTA, VRINTN, VRINTP
VRINTM and VRINTZ instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This helper sets the rounding mode in the standard_fp_status word to
allow NEON instructions to modify the rounding mode whilst using the
standard FPSCR values for everything else.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for AArch32 ARMv8 FP VRINTA, VRINTN, VRINTP and VRINTM
instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function will be needed for AArch32 ARMv8 support, so move it to
helper.c where it can be used by both targets. Also moves the code out
of line, but as it is quite a large function I don't believe this
should be a significant performance impact.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For blizzard, pl110 and tc6393xb this is harmless, but for pxa2xx
Coverity noticed that it is used inside an "if" statement.
Fix it because it's the file with the highest number of defects
in the whole QEMU tree! Use "do...while (0)", or just remove the
semicolon if there's a single statement in the macro.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code which decides whether to set up the ATAGS data structure on
reset was using the wrong conditional, which meant we were creating
an ATAGS structure when doing a device-tree boot if the dtb was
autogenerated by the board. This is harmless, but unnecessary, so
bring it in to line with user-provided-dtb boots.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1388326833-656-1-git-send-email-peter.maydell@linaro.org
Add support for the SIMD scalar copy instruction group (C3.6.7),
which consists of the single instruction DUP (element, scalar).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for the AdvSIMD modified immediate group
(C3.6.6) with all its suboperations (movi, orr, fmov, mvni, bic).
Signed-off-by: Alexander Graf <agraf@suse.de>
[AJB: new decode struct, minor bug fixes, optimisation]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the SIMD "across lanes" instruction group (C3.6.4).
Signed-off-by: Michael Matz <matz@suse.de>
[PMM: Updated to current codebase, added fp min/max ops,
added unallocated encoding checks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the SIMD ZIP/UZIP/TRN instruction group
(C3.6.3).
Signed-off-by: Michael Matz <matz@suse.de>
[PMM: use new do_vec_get/set etc functions and generally update to new
codebase standards; refactor to pull per-element loop outside switch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the SIMD TBL/TBLX instructions (group C3.6.2).
Signed-off-by: Michael Matz <matz@suse.de>
[PMM: rewritten to do more of the decode in translate-a64.c,
and to do only one 64 bit pass at a time in the helper]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the SIMD EXT instruction (the only one in its
group, C3.6.1).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add decode skeleton and function placeholders for all the SIMD data
processing instructions. Due to the complexity of this part of the
table the normal extract and switch approach gets very messy very
quickly, so we use a simple data-driven pattern-and-mask approach.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the SIMD ld/st single structure instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support support for the SIMD load/store
multiple category of instructions.
This also brings in a couple of helper functions for manipulating
sections of the SIMD registers:
* do_vec_get - fetch value from a slice of a vector register
* do_vec_set - set a slice of a vector register
which use vec_reg_offset for consistent processing of offsets in an
endian aware manner. There are also additional helpers:
* do_vec_ld - load value into SIMD
* do_vec_st - store value from SIMD
which load or store a slice of a vector register to memory.
These don't zero extend like the fp variants.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tracing pull request
# gpg: Signature made Mon 27 Jan 2014 14:51:09 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* stefanha/tags/tracing-pull-request:
trace: fix simple trace "disable" keyword
trace: add glib 2.32+ static GMutex support
trace: [simple] Do not include "trace/simple.h" in generated tracer headers
tracing: start trace processing thread in final child process
Message-id: 1390834386-23139-1-git-send-email-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The partial register handling (introduced with commits
420840e58b and
3474b67948 ) aimed to improve intercept
handling performance.
It made the code more complicated though. During development for life
migration/init/reset etc it turned out that this might cause several
hard to debug programming errors. With the introduction of ioeventfd
(and future irqfd patches) the qemu intercept handlers are no longer
hot-path. And therefore the partial register handling can be
removed to simplify the code.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
CC: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
acpi,pci,pc,virtio fixes and enhancements
This includes new unit-tests for acpi by Marcel,
hotplug for pci bridges by myself (piix only so far)
and cpu hotplug for q35.
And a bunch of fixes all over the place as usual.
I included the patch to fix memory alignment for q35
as well - even though it limits 32 bit guests to 3G (they
previously could address more memory with PAE).
To remove the limit, this will have to be fixed in seabios.
I also added self as virtio co-maintainer so I don't need
to troll the list for patches to review.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 26 Jan 2014 11:12:09 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* mst/tags/for_anthony: (35 commits)
MAINTAINERS: add self as virtio co-maintainer
q35: document gigabyte_align
q35: gigabyte alignment for ram
acpi: Fix PCI hole handling on build_srat()
pc: Save size of RAM below 4GB
hw/pci: fix error flow in pci multifunction init
acpi-test: update expected AML since recent changes
pc: ACPI: update acpi-dsdt.hex.generated q35-acpi-dsdt.hex.generated
pc: ACPI: unify source of CPU hotplug IO base/len
pc: ACPI: expose PRST IO range via _CRS
pc: Q35 DSDT: exclude CPU hotplug IO range from PCI bus resources
pc: PIIX DSDT: exclude CPU/PCI hotplug & GPE0 IO range from PCI bus resources
pc: set PRST base in DSDT depending on chipset
acpi: ich9: add CPU hotplug handling to Q35 machine
acpi: factor out common cpu hotplug code for PIIX4/Q35
acpi-build: enable hotplug for PCI bridges
piix4: add acpi pci hotplug support
pcihp: generalization of piix4 acpi
pci: add pci_for_each_bus_depth_first
pc: make: fix dependencies: rebuild when included file is changed
...
Message-id: 1390735289-15563-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Net patches
# gpg: Signature made Mon 27 Jan 2014 14:45:35 GMT using RSA key ID 81AB73C8
# gpg: Can't check signature: public key not found
* stefanha/tags/net-pull-request:
tap-linux: Get features once and use it many times
Fix lan9118 buffer length handling
Fix lan9118 TX "CMD A" handling
net: Use g_strdup_printf instead of snprintf.
Message-id: 1390834129-19625-1-git-send-email-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The following commit:
commit 149f54b53b
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Fri May 24 12:59:37 2013 +0200
memory: add address_space_translate
breaks Xen support in QEMU, in particular the Xen mapcache. The effect
is that one Windows XP installation out of ten would end up with BSOD.
The reason is that after this commit l in address_space_rw can span a
page boundary, however qemu_get_ram_ptr still calls xen_map_cache asking
to map a single page (if block->offset == 0).
Fix the issue by reverting to the previous behaviour: do not return a
length from address_space_translate_internal that can span a page
boundary.
Also in address_space_translate do not ignore the length returned by
address_space_translate_internal.
This patch should be backported to QEMU 1.6.x.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Perard <anthony.perard@citrix.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
trivial-patches for 2014-01-16
# gpg: Signature made Thu 16 Jan 2014 17:29:05 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838
Message-id: 1389893719-16336-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have cache pools of temporaries that we can reuse later when they've
already been allocated before.
These cache pools differenciate between the target TCG variable type they
contain. So we have one pool for I32 and one pool for I64 variables.
On a 32bit system, we can't work with 64bit registers though. So instead we
spawn two I32 temporaries for every I64 temporary we create. All caching
works the same way as on a real 64-bit system though: We create a cache entry
in the 64bit array for the first i32 index.
However, when we free such a temporary we free it to the pool of its type
(which is always i32 on 32bit systems) rather than its base_type (which is
i64 or i32 depending on the variable). This means we put a temporary that
is of base_type == i64 into the i32 preallocated temporary pool.
Eventually, this results in failures like this on 32bit hosts:
qemu-system-ppc64: tcg/tcg.c:515: tcg_temp_new_internal: Assertion `ts->base_type == type' failed.
This patch makes the free routine use the base_type instead for the free case,
so it's consistent with the temporary allocation. It fixes the above failure
for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1390146811-59936-1-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
in addition fix default backend leak by releasing it if its
initialization failed.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Introduces USER_CREATABLE interface that must be implemented by
objects which are designed to created with -object CLI option or
object-add QMP command.
Interface provides an ability to do an optional second stage
initialization of the object created with -object/object-add
commands. By providing complete() callback, which is called
after the object properties were set.
It allows to:
* prevents misusing of -object/object-add by filtering out
objects that are not designed for it.
* generalize second stage backend initialization instead of
adding custom APIs to perform it
* early error detection of backend initialization at -object/
object-add time rather than through a proxy DEVICE object
that tries to use backend.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
object_property_add_child() may fail if 'id' matches
an already existing object. Which means an incorrect
command line.
So instead of silently ignoring error, report it and
terminate QEMU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Change to DEBUG_VFIO in vfio_msi_interrupt() for debug
messages to get printed
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Define new SCLP codes and structures that will be needed for
s390 memory hotplug.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The trace-events "disable" keyword turns an event into a nop at
compile-time. This is important for high-frequency events that can
impact performance.
The "disable" keyword is currently broken in the simple trace backend.
This patch fixes the problem as follows:
Trace events are identified by their TraceEventID number. When events
are disabled there are two options for assigning TraceEventID numbers:
1. Skip disabled events and don't assign them a number.
2. Assign numbers for all events regardless of the disabled keyword.
The simple trace backend and its binary file format uses approach #1.
The tracetool infrastructure has been using approach #2 for a while.
The result is that the numbers used in simple trace files do not
correspond with TraceEventIDs. In trace/simple.c we assumed that they
are identical and therefore emitted bogus numbers.
This patch fixes the bug by using TraceEventID for trace_event_id()
while sticking to approach #1 for simple trace file numbers. This
preserves simple trace file format compatibility.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The GStaticMutex API was deprecated in glib 2.32. We cannot switch over
to GMutex unconditionally since we would drop support for older glib
versions. But the deprecated API warnings during build are annoying so
use static GMutex when possible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The header is not necessary, given that the simple backend does not define any
inlined tracing routines.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When running with trace backend e.g. "simple" the writer thread needs to be
implemented in the same process context as the trace points that will be
processed. Under libvirtd control, qemu gets first started in daemonized
mode to privide its capabilities. Creating the writer thread in the initial
process context then leads to a dead lock because the thread gets termined
together with the initial parent. (-daemonize)
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[minor whitespace fixes]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 9118 ethernet controller supports transmission of multi-buffer packets
with arbitrary byte alignment of the start and end bytes. All writes to
the packet fifo are 32 bits, so the controller discards bytes at the beginning
and end of each buffer based on the 'Data start offset' and 'Buffer size'
of the TX command 'A' format.
This patch uses the provided buffer length to limit the bytes transmitted.
Previously all the bytes of the last 32-bit word written to the TX fifo
were added to the internal transmit buffer structure resulting in more bytes
being transmitted than were submitted to the hardware in the command. This
resulted in extra bytes being inserted into the middle of multi-buffer
packets when the non-final buffers had non-32bit aligned ending addresses.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 9118 ethernet controller supports transmission of multi-buffer packets
with arbitrary byte alignment of the start and end bytes. All writes to
the packet fifo are 32 bits, so the controller discards bytes at the beginning
and end of each buffer based on the 'Data start offset' and 'Buffer size'
of the TX command 'A' format.
This patch changes the buffer size and offset internal state variables to be
updated on every "TX command A" write. Previously they were only updated for
the first segment, which resulted incorrect behavior for packets with more
than one segment. Each segment of the packet has its own CMD A command, with
its own buffer size and start offset.
Also update extraction of fields from the CMD A word to use extract32().
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
assign_name() in net/net.c is using snprintf + g_strdup to get the same
result as g_strdup_printf.
Signed-off-by: Hani Benhabiles <kroosec@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Map 2G (q35) of memory below 4G, so the RAM pieces
are nicely aligned to gigabyte borders.
Keep old memory layout for (a) old machine types and (b) in case all
memory fits below 4G and thus we don't have to split RAM into pieces
in the first place. The later makes sure this change doesn't take
away memory from 32bit guests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The original SeaBIOS code used the RamSize variable, that was used by
SeaBIOS for the size of RAM below 4GB, not for all RAM. When copied to
QEMU, the code was changed to use the full RAM size, and this broke the
build_srat() code that handles the PCI hole.
Change build_srat() to use ram_size_below_4g instead of ram_size, to
restore the original behavior from SeaBIOS.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ram_below_4g value will be useful in other places, such as the ACPI
table code, and other code that currently requires passing
below_4g_mem_size around in function arguments.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Scenario:
- There is a non multifunction pci device A on 00:0X.0.
- Hot-plug another multifunction pci device B at 00:0X.1.
- The operation will fail of course.
- Try to hot-plug the B device 2-3 more times, qemu will crash.
Reason: The error flow leaves the B's address space into global address spaces
list, but the device object is freed. Fixed that.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
use C headers defines as source of IO base/len for respective
values in ASL code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. so OSPM could notice resource conflict if there is any.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... for range defined at hw/acpi/ich9.c:ICH9_PROC_BASE
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. so that they might not be used by PCI devices.
Note:
Resort to concatenating templates with preprocessor help,
because 1.0b spec isn't supporting ConcatenateResTemplate,
as result Windows XP fails to execute PCI0._CRS method if
ConcatenateResTemplate() is used.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. use IO port 0cd8-0xcf7 range for CPU present bitmap
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. so it could be used for adding CPU hotplug to Q35 machine
Add an additional header with that will be shared between
C and ASL code: include/hw/acpi/cpu_hotplug_defs.h
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This enables support for device hotplug behind
pci bridges. Bridge devices themselves need
to be pre-configured on qemu command line.
Design:
- at machine init time, assign "bsel" property to bridges with
hotplug support
- dynamically (At ACPI table read) generate ACPI code to handle
hotplug events for each bridge with "bsel" property
Note: ACPI doesn't support adding or removing bridges by hotplug.
We detect and prevent removal of bridges by hotplug,
unless they were added by hotplug previously
(and so, are not described by ACPI).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for acpi pci hotplug using the
new infrastructure.
PIIX4 legacy interface is maintained as is for
machine types 1.7 and older.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add ACPI based PCI hotplug library with bridge hotplug
support.
Design
- each bus gets assigned "bsel" property.
- ACPI code writes this number
to a new BNUM register, then uses existing
UP/DOWN registers to probe slot status;
to eject, write number to BNUM register,
then slot into existing EJ.
The interface is actually backwards-compatible with
existing PIIX4 ACPI (though not migration compatible).
This is split out from PIIX4 codebase so we can
reuse it for Q35 as well.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
some *.dsl files include another *.dsl files but there weren't
any dependicies and when included file changed target table wasn't
rebuild. Fix this by using the same auto dependency generation
as for C files.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The asl comparison will break every time the ACPI
tables are updated. This may break the git bisect.
Instead of failing print a warning on stderr
including the retained asl files, so they can be
compared offline.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It seems that iasl has an issue when disassembles
some ACPI tables using the command line:
iasl -e DSDT -e SSDT -d HPET
Modified the iasl command line to "iasl -d HPET"
until the problem is solved. The command line
remained the same for DSDT and SSDT tables.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just a refactoring, ssdt_tables name was confusing as
it included other tables as well.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Double endianness convertion make this test failing on POWERPC machine
running in big-endian.
This fixes the test to success on big-endian host.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When running the test with TEST_ACPI_REBUILD_AML=y environment
variable, the test will rebuild and validate the expected aml
files.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acpi unit-test will fail every time the acpi tables change.
This script rebuild the expected aml files, so the test
will pass. It also validates the modifications.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The test checked if iasl is installed by running "iasl"
and checking the error output.
It is better to use the iasl executable as appears
in configuration.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acpi unit-tests will extract iasl executable
from CONFIG_IASL define.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This test will run only if iasl is installed on the host machine.
The test plan:
1. Dumps the ACPI tables as AML on the disk.
2. Runs iasl to disassembly the tables into ASL files.
3. Runs iasl to disassembly the offline AML files into ASL files.
4. Compares the ASL files.
The test runs for both default machine and q35.
In case the test fails, it can be easily tweaked to
show the differences between the ASL files and
understand the issue.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ensure configure will set-up links for the files
if the build is created in other directory.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added unit-test's expected aml files to be compared
with the actual ACPI tables.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
cgcc complains that -ENOSYS is not a good value for 'bool'.
A dummy virtio will never have pending queue entries, so let us return
false.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Minimize the storage used for AppleSMC's _STA (8bit), relying on ASL
to implicitly convert it to the officially specified 32bit value.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
AppleSMC (-device isa-applesmc) is required to boot OS X guests.
OS X expects a SMC node to be present in the ACPI DSDT. This patch
adds a SMC node to the DSDT, and dynamically patches the return value
of SMC._STA to either 0x0B if the chip is present, or otherwise to 0x00,
before booting the guest.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
TCG_TARGET_HAS_movcond_i32 is always defined to 1 in tcg-target.h, so
remove the corresponding #ifdef #endif sequence, left from a previous
refactoring.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The movbe instruction has been added on some Intel Atom CPUs and on
recent Intel Haswell CPUs. It allows to load/store a value and at the
same time bswap it.
This patch detects the avaibility of this instruction and when available
use it in the qemu load/store routines in replacement of load/store +
bswap. Note that for 16-bit unsigned loads, movbe + movzw is basically the
same as movzw + bswap, so the patch doesn't touch this case.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[RTH: Reduced the number of conditionals using "movop".]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add support for three-byte opcodes, starting with the 0x0f 0x38 prefix.
Use P_EXT38 as the new constant, and shift all other constants so that
P_EXT and P_EXT38 have neighbouring values.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[RTH: Changed the name from P_EXT2 to P_EXT38.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
P_REXW is defined has a constant at the beginning of i386/tcg-target.c,
but the corresponding bit is later used in a harcoded way, which defeat
the purpose of a constant.
Fix that by using a conditional expression operator instead of a shift.
On x86 this actually makes the code slightly smaller as GCC does in
practice (opc >> 8) & 8 instead of (opc & 0x800) >> 8 so the constants
are smaller to load.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
* qemu-kvm/uq/master:
kvm: always update the MPX model specific register
KVM: fix addr type for KVM_IOEVENTFD
KVM: Retry KVM_CREATE_VM on EINTR
mempath prefault: fix off-by-one error
kvm: x86: Separately write feature control MSR on reset
roms: Flush icache when writing roms to guest memory
target-i386: clear guest TSC on reset
target-i386: do not special case TSC writeback
target-i386: Intel MPX
Conflicts:
exec.c
aliguori: fix trivial merge conflict in exec.c
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Initial patch for QEMU GTK support on Windows
# gpg: Signature made Mon 20 Jan 2014 11:37:58 AM PST using RSA key ID FAD62069
# gpg: Can't check signature: public key not found
* sweil/tags/for_anthony:
gtk: Support keyboard translation for hosts running Windows
Message-id: 1390246909-18757-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
hda-codec: disable streams on reset
# gpg: Signature made Tue 21 Jan 2014 02:17:12 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
* kraxel/tags/pull-audio-2:
hda-codec: disable streams on reset
Message-id: 1390299589-5082-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
usb core+hid: add support for microsoft os descriptors
# gpg: Signature made Tue 21 Jan 2014 02:21:29 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
* kraxel/tags/pull-usb-2:
usb-hid: add microsoft os descriptor support
usb: add support for microsoft os descriptors
Message-id: 1390299772-5368-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
* bonzini/scsi-next:
scsi: Support TEST UNIT READY in the dummy LUN0
block: add .bdrv_reopen_prepare() stub for iscsi
virtio-scsi: Prevent assertion on missed events
virtio-scsi: Cleanup of I/Os that never started
scsi: Assign cancel_io vector for scsi_disk_emulate_ops
Conflicts:
block/iscsi.c
aliguori: resolve trivial merge conflict in block/iscsi.c
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Block patches
# gpg: Signature made Fri 24 Jan 2014 08:40:53 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
* kwolf/tags/for-anthony: (93 commits)
block: Switch bdrv_io_limits_intercept() to byte granularity
qemu-iotests: Test pwritev RMW logic
qemu-io: New command 'sleep'
blkdebug: Make required alignment configurable
iscsi: Set bs->request_alignment
block: Make bdrv_pwrite() a bdrv_prwv_co() wrapper
block: Make bdrv_pread() a bdrv_prwv_co() wrapper
block: Change coroutine wrapper to byte granularity
block: Assert serialisation assumptions in pwritev
block: Align requests in bdrv_co_do_pwritev()
block: Allow wait_serialising_requests() at any point
block: Make overlap range for serialisation dynamic
block: Generalise and optimise COR serialisation
block: Make zero-after-EOF work with larger alignment
block: Allow waiting for overlapping requests between begin/end
block: Switch BdrvTrackedRequest to byte granularity
block: Introduce bdrv_co_do_pwritev()
block: write: Handle COR dependency after I/O throttling
block: Introduce bdrv_aligned_pwritev()
block: Introduce bdrv_co_do_preadv()
...
Message-id: 1390584136-24703-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Request sizes used to be rounded down to the next sector boundary,
allowing to bypass the I/O limit. Now all requests are accounted for
with their exact byte size.
Reported-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
There is no easy way to check that a request correctly waits for a
different request. With a sleep command we can at least approximate it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new 'align' option of blkdebug can be used in order to emulate
backends with a required 4k alignment on hosts which only really require
512 byte alignment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The iSCSI backend already gets the block size from the READ CAPACITY
command it sends. Save it so that the generic block layer gets it
too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of implementing the alignment adjustment here, use the now
existing functionality of bdrv_co_do_pwritev().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of implementing the alignment adjustment here, use the now
existing functionality of bdrv_co_do_preadv().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If a request calls wait_serialising_requests() and actually has to wait
in this function (i.e. a coroutine yield), other requests can run and
previously read data (like the head or tail buffer) could become
outdated. In this case, we would have to restart from the beginning to
read in the updated data.
However, we're lucky and don't actually need to do that: A request can
only wait in the first call of wait_serialising_requests() because we
mark it as serialising before that call, so any later requests would
wait. So as we don't wait in practice, we don't have to reload the data.
This is an important assumption that may not be broken or data
corruption will happen. Document it with some assertions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This patch changes bdrv_co_do_pwritev() to actually be what its name
promises. If requests aren't properly aligned, it performs a RMW.
Requests touching the same block are serialised against the RMW request.
Further optimisation of this is possible by differentiating types of
requests (concurrent reads should actually be okay here).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
We can only have a single wait_serialising_requests() call per request
because otherwise we can run into deadlocks where requests are waiting
for each other. The same is true when wait_serialising_requests() is not
at the very beginning of a request, so that other requests can be issued
between the start of the tracking and wait_serialising_requests().
Fix this by changing wait_serialising_requests() to ignore requests that
are already (directly or indirectly) waiting for the calling request.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Copy on Read wants to serialise with all requests touching the same
cluster, so wait_serialising_requests() rounded to cluster boundaries.
Other users like alignment RMW will have different requirements, though
(requests touching the same sector), so make it dynamic.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Change the API so that specific requests can be marked serialising. Only
these requests are checked for overlaps then.
This means that during a Copy on Read operation, not all requests
overlapping other requests are serialised any more, but only those that
actually overlap with the specific COR request.
Also remove COR from function and variable names because this
functionality can be useful in other contexts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Odd file sizes could make bdrv_aligned_preadv() shorten the request in
non-aligned ways. Fix it by rounding to the required alignment instead
of 512 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Previously, it was not possible to use wait_for_overlapping_requests()
between tracked_request_begin()/end() because it would wait for itself.
Ignore the current request in the overlap check and run more of the
bdrv_co_do_preadv/pwritev code with a BdrvTrackedRequest present.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This is going to become the bdrv_co_do_preadv() equivalent for writes.
In this patch, however, just a function taking byte offsets is created,
it doesn't align anything yet.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
First waiting for all COR requests to complete and calling the
throttling function afterwards means that the request could be delayed
and we still need to wait for the COR request even if it was issued only
after the throttled write request.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This separates the part of bdrv_co_do_writev() that needs to happen
before the request is modified to match the backend alignment, and a
part that needs to be executed afterwards and passes the request to the
BlockDriver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Similar to bdrv_pread(), which aligns byte-aligned request to 512 byte
sectors, bdrv_co_do_preadv() takes a byte-aligned request and aligns it
to the alignment specified in bs->request_alignment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This separates the part of bdrv_co_do_readv() that needs to happen
before the request is modified to match the backend alignment, and a
part that needs to be executed afterwards and passes the request to the
BlockDriver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Add a bs->request_alignment field that contains the required
offset/length alignment for I/O requests and fill it in the raw block
drivers. Use ioctls if possible, else see what alignment it takes for
O_DIRECT to succeed.
While at it, also expose the memory alignment requirements, which may be
(and in practice are) different from the disk alignment requirements.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The alignment field is now set to the value that is promised to the
guest, rather than required by the host. The next patches will make
QEMU aware of the host-provided values, so make this clear.
The alignment is also not about memory buffers, but about the sectors on
the disk, change the documentation of the field.
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
bs->buffer_alignment is set by the device emulation and contains the
logical block size of the guest device. This isn't something that the
block layer should know, and even less something to use for determining
the right alignment of buffers to be used for the host.
The new BlockLimits field opt_mem_alignment tells the qemu block layer
the optimal alignment to be used so that no bounce buffer must be used
in the driver.
This patch may change the buffer alignment from 4k to 512 for all
callers that used qemu_blockalign() with the top-level image format
BlockDriverState. The value was never propagated to other levels in the
tree, so in particular raw-posix never required anything else than 512.
While on disks with 4k sectors direct I/O requires a 4k alignment,
memory may still be okay when aligned to 512 byte boundaries. This is
what must have happened in practice, because otherwise this would
already have failed earlier. Therefore I don't expect regressions even
with this intermediate state. Later, raw-posix can implement the hook
and expose a different memory alignment requirement.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
For an O_DIRECT request to succeed, it's not only necessary that all
base addresses in the qiov are aligned, but also that each length in it
is aligned.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The functions used by qemu_memalign() require an alignment that is at
least sizeof(void*). Adjust it if it is too small.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
When reopening with different flags, or when backing files disappear
from the chain, the limits may change. Make sure they get updated in
these cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
When there is a format driver between the backend, it's not guaranteed
that exposing the opt_transfer_length for the format driver results in
the optimal requests (because of fragmentation etc.), but it can't make
things worse, so let's just do it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
This function separates filling the BlockLimits from bdrv_open(), which
allows it to call it from other operations which may change the limits
(e.g. modifications to the backing file chain or bdrv_reopen)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
bdrv_commit() could return 0 or 1 on success, depending on whether or
not the last sector was allocated in the overlay and whether the overlay
format had a .bdrv_make_empty callback.
Most callers ignored it, but qemu-img commit would print an error
message while the operation actually succeeded.
Also clean up the handling of I/O errors to return the real error code
instead of -EIO.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This updates the documentation for commiting snapshot images.
Specifically, this highlights what happens when the base image
is either smaller or larger than the snapshot image being committed.
In the case of the base image being smaller, it is resized to the
larger size of the snapshot image. In the case of the base image
being larger, it is not resized automatically, but once the commit
has completed it is safe for the user to truncate the base image.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the top image to commit is the active layer, and also larger than
the base image, then an I/O error will likely be returned during
block-commit.
For instance, if we have a base image with a virtual size 10G, and a
active layer image of size 20G, then committing the snapshot via
'block-commit' will likely fail.
This will automatically attempt to resize the base image, if the
active layer image to be committed is larger.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, if an image file is logically larger than its backing file,
committing it via 'qemu-img commit' will fail.
For instance, if we have a base image with a virtual size 10G, and a
snapshot image of size 20G, then committing the snapshot offline with
'qemu-img commit' will likely fail.
This will automatically attempt to resize the base image, if the
snapshot image to be committed is larger.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
libcurl versions 7.16.0 and later have a timer callback interface which
must be implemented in order for libcurl to make forward progress (it
will sometimes rely on being called back on the timeout if there are
no file descriptors registered). Implement the callback, and use a
QEMU AIO timer to ensure we prod libcurl again when it asks us to.
Based on Peter's original patch plus my fix to add curl_multi_timeout_do.
Should compile just fine even on older versions of libcurl.
I also tried copy-on-read and streaming:
$ ./qemu-img create -f qcow2 -o \
backing_file=http://download.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso \
foo.qcow2 1G
$ x86_64-softmmu/qemu-system-x86_64 \
-drive if=none,file=foo.qcow2,copy-on-read=on,id=cd \
-device ide-cd,drive=cd --enable-kvm -m 1024
Direct http usage is probably too slow, but with copy-on-read ultimately
the image does boot!
After some time, streaming gets canceled by an EIO, which needs further
investigation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
There was two candidate ways to implement named node manipulation:
1)
{ 'command': 'block_passwd', 'data': {'*device': 'str',
'*node-name': 'str', 'password': 'str'}
}
2)
{ 'command': 'block_passwd', 'data': {'device': 'str',
'*device-is-node': 'bool',
'password': 'str'} }
Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to
rewrite the QMP block interface for 2.0.
Luiz does not like in 1 the fact that 2 fields are optional but one of them must
be specified leading to an abuse of the QMP semantic.
Kevin argumented that 2 what a clear abuse of the device field and would not be
practical when reading fast some log file because the user would read "device"
and think that a device is manipulated when it's in fact a node name.
Documentation of 1 make it pretty clear what to do for the user.
Kevin argued that all bs are node including devices ones so 2 does not make
sense.
Kevin also argued that rewriting the QMP block interface would not make disapear
the current one.
Kevin pushed the argument that making the QAPI generator compatible with the
semantic of the operation would need a rewrite that no one has done yet.
A vote has been done on the list to elect the version to use and 1 won.
For reference the complete thread is:
"[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver
states."
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the minimum of code to prepare for the following patches.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently there is no way to query BlockStats of the backing chain. This
adds "backing" field into BlockStats to make it possible.
The comment of "parent" is reworded.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the function mirror_iteration() -> qemu_iovec_init(),
it allocates memory for op->qiov.iov, when the write request calls back,
but in the function mirror_iteration_done(), it only frees the op,
not free the op->qiov.iov, so this causes memory leak.
It should use qemu_iovec_destroy() to free op->qiov.
Signed-off-by: Zhang Min <rudy.zhangmin@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Document the SIGUSR1 behaviour of qemu-img. Also, added compare to the
list of subcommands that support -p.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Since commit a7aae221 ('Switch SIG_IPI to SIGUSR1'), SIGUSR1 is blocked
during startup, breaking the progress report in tools.
This patch reenables the signal when initialising a progress report.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Accoring to qcow spec, the offset fields in l1e, l2e and ref table entry
start at bit 9. The offset is cluster offset, and the smallest possible
cluster size is 512 bytes.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Propagate the error return value from get_indirect(). This bug was
introduced in commit 4d684832 ("vring: create a common function to parse
descriptors").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a backing file is opened such that (1) a protocol is directly
used as the block driver and (2) the block driver has bdrv_file_open,
bdrv_open_backing_file segfaults. The problem arises because
bdrv_open_common returns without setting bd->backing_hd->file.
To effect (1), you seem to have to use the -F flag in qemu-img. There
are several block drivers that satisfy (2), such as "file" and "nbd".
Here are some concrete examples:
#!/bin/bash
echo Test file format
./qemu-img create -f file base.file 1m
./qemu-img create -f qcow2 -F file -o backing_file=base.file\
file-overlay.qcow2
./qemu-img convert -O raw file-overlay.qcow2 file-convert.raw
echo Test nbd format
SOCK=$PWD/nbd.sock
./qemu-img create -f raw base.raw 1m
./qemu-nbd -t -k $SOCK base.raw &
trap "kill $!" EXIT
while ! test -e $SOCK; do sleep 1; done
./qemu-img create -f qcow2 -F nbd -o backing_file=nbd:unix:$SOCK\
nbd-overlay.qcow2
./qemu-img convert -O raw nbd-overlay.qcow2 nbd-convert.raw
Without this patch, the two qemu-img convert commands segfault.
This is a regression that was introduced in v1.7 by
dbecebddfa.
Signed-off-by: Peter Feiner <peter@gridcentric.ca>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for the new blkdebug/blkverify interface.
This test is not written in Python, although it uses QMP. This is
because it invokes the qemu-io HMP command, which outputs errors to
stderr instead of returning them through QMP. Filtering and testing that
output is easier in a shell script than with the Python infrastructure.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test case for qdict_flatten() in tests/check-qdict.c. This test
case covers the flattening of subordinate QLists as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Giving a filename is actually not essential, since it can be specified
through the options as well - on the contrary: Sometimes a filename must
not be given.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add structures to support blkdebug and blkverify in blockdev-add.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using "errno" directly as an identifier results in various syntax
errors; therefore it should be added to the list of polluted words.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the filename is not prefixed by "blkverify:" in
blkverify_parse_filename(), the blkverify driver was not selected
through that protocol prefix, but by an explicit command line (or QMP)
option (like driver=blkverify).
If blkverify_parse_filename() has been called, a filename has been
given. If it is not prefixed, it is probably really just a plain
filename. This is no problem, since we can use it as the test image
filename and rely on the user to specify the raw image filename through
the new corresponding option.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce the "test" and "raw" options for specifying images.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce the "image" option as an alternative to specifying the image
through the filename.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Specifying the image filename through the "file" option is a legacy
option and should not be supported by blockdev-add (in that case, giving
a string for "file" references an existing block device).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It should be possible to use a format as a driver for a file which in
turn requires another file, i.e., nesting file formats.
Allowing nested file formats results in e.g. qcow2 BlockDriverStates
never being directly passed to bdrv_open_common() from bdrv_file_open(),
but instead being handed through bdrv_open(). This changes the error
message when trying to give a filename to qcow2, i.e. trying to use it
as a driver for the protocol level. Therefore, change the reference
output of I/O test 051 accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using bdrv_open_image() instead of bdrv_file_open() directly in
bdrv_open() is easier.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a common function for opening images to be used for block drivers
specified through BlockdevRefs in an option QDict. The difference from
bdrv_file_open() is that this function may invoke bdrv_open() instead,
allowing auto-detection of the driver to be used; and second, it
automatically extracts the BlockdevRef from the option QDict.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blkdebug and blkverify will, in order to retain compatibility, not
support the field "file" implicitly through bdrv_open(). In order to be
able to use those drivers without giving a filename anyway, it is
necessary to be able to have block devices without files implicitly
opened by bdrv_open(). This is the case, if there was neither a file
name, a reference to an existing block device to use as a file nor
options specific to the file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With that now being possible, bdrv_open() should try to extract a block
device reference from the options and pass it to bdrv_file_open().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use qemu_config_parse_qdict() to parse the command-line options in
addition to the config file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the check whether there actually is a config file into the
read_config() function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function basically parses command-line options given as a QDict
replacing a config file.
For instance, the QDict {"section.opt1": 42, "section.opt2": 23}
corresponds to the config file:
[section]
opt1 = 42
opt2 = 23
It is possible to specify multiple sections and also multiple sections
of the same type. On the command line, this looks like the following:
inject-error.0.event=reftable_load,\
inject-error.1.event=l2_load,\
set-state.event=l1_update
This would correspond to the following config file:
[inject-error "inject-error.0"]
event = reftable_load
[inject-error "inject-error.1"]
event = l2_load
[set-state]
event = l1_update
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reversing qdict_array_split(), qdict_flatten() should flatten QLists as
well by interpreting them as QDicts where every entry's key is its
index.
This allows bringing QDicts with QLists from QMP commands to the same
form as they would be given as command-line options, thereby allowing
them to be parsed the same way.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function splits a QDict consisting of entries prefixed by
incrementally enumerated indices into a QList of QDicts.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the filename is not prefixed by "blkdebug:" in
blkdebug_parse_filename(), the blkdebug driver was not selected through
that protocol prefix, but by an explicit command line option
(file.driver=blkdebug or something similar). Contrary to the current
reaction, this is not a problem at all; we just need to store the
filename (in the x-image option) and can go on; the user just has to
manually specify the config option.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Autocomplete qemu-io commands at the interactive prompt.
Note this only completes command names and not their options.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use readline.c for command-line history. There was support for GNU
Readline and BSD Editline but it was never compiled in. Since QEMU has
its own readline.c, just use that when qemu-io runs with stdin attached
to a terminal.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using stdin with readline.c requires disabling echo and line buffering.
Add a portable wrapper to set the terminal attributes under Linux and
Windows.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the monitor and readline are decoupled, readline.h no longer
belongs in include/monitor/. Put the header into include/qemu/.
Move the source file into util/ so it can be linked as part of
libqemuutil.a.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the readline.c functionality reusable. Instead of calling
monitor_printf() and monitor_flush() directly, invoke function pointers
provided by the user.
This way readline.c does not know about Monitor and other users will be
able to make use of readline.c.
Note that there is already an "opaque" argument to the ReadLineFunc
callback. Consistently call it "readline_opaque" from now on to
distinguish from the ReadLinePrintfFunc/ReadLineFlushFunc "opaque"
argument.
I also dropped the printf macro trickery since it's now highly unlikely
that anyone modifying readline.c would call printf(3) directly. We no
longer need this protection.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Local variable "n" as int64_t avoids overflow with large sector number
calculation. See test case change for failure case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 9117b47717 ("qcow2: Change default
for new images to compat=1.1") changed the default qcow2 image format
version but forgot to update qemu-doc.texi and qemu-img.texi.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When we disable vnc from "./configure", QEMU can't use the vnc option.
So qtest can't use the "vnc -none ", otherwise "make check" fails.
If QEMU uses "-display none", "-vnc none" is excrescent, So we just need to drop it.
Signed-off-by: Kewei Yu <keweihk@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should pass base_inode->vdi_id to base_vdi_id of SheepdogVdiReq so that sheep
can create a clone instead a fresh volume.
This fixes following command:
qemu-create -b sheepdog:base sheepdog:clone
so users can boot sheepdog:clone as a normal volume.
Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
GlusterFS supports creation of zero-filled file on GlusterFS volume
by means of an API called glfs_zerofill(). Use this API from QEMU to
create an image that is filled with zeroes by using the preallocation
option of qemu-img.
qemu-img create gluster://server/volume/image -o preallocation=full 10G
The allowed values for preallocation are 'full' and 'off'. By default
preallocation is off and image is not zero-filled.
glfs_zerofill() offloads the writing of zeroes to the server and if
the storage supports SCSI WRITESAME, GlusterFS server can issue
BLKZEROOUT ioctl to achieve the zeroing.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Support .bdrv_co_write_zeroes() from gluster driver by using GlusterFS API
glfs_zerofill() that off-loads the writing of zeroes to GlusterFS server.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert the read, write, flush and discard implementations from aio-based
ones to coroutine based ones.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
if an async libiscsi call fails directly it can only be due
to an out of memory condition. All other errors are returned
through the callback.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This modifies _cleanup_test_img to remove all the extent files listed by
"qemu-img info"'s format specific information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some cases are not applicable for vmdk subformats those don't support
certain features, e.g. backing file, and some others can't run on
mult-file image, e.g. monolithicFlat. This adds declaration in test
cases to skip them automatically, so that iotests on vmdk can go
more smoothly (without manually picking of cases for each subformat).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce _unsupported_imgopts that causes _notrun for specific image
options.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
rbd callbacks are called from non-QEMU threads. Up until now a pipe was
used to signal completion back to the QEMU iothread.
The pipe writer code handles EAGAIN using select(2). The select(2) API
is not scalable since fd_set size is static. FD_SET() can write beyond
the end of fd_set if the file descriptor number is too high. (QEMU's
main loop uses poll(2) to avoid this issue with select(2).)
Since the pipe itself is quite clumsy to use and QEMUBH is now
thread-safe, just schedule a BH from the rbd callback function. This
way we can simplify I/O completion in addition to eliminating the
potential FD_SET() crash when file descriptor numbers become too high.
Crash scenario: QEMU already has 1024 file descriptors open. Hotplug an
rbd drive and get the pipe writer to take the select(2) code path.
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Tested-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an sclp event for "cpu was hot plugged". This allows Qemu to deliver an
SCLP interrupt to the guest stating that the requested cpu hotplug was
completed.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Implement the CPU data in SCLP "Read SCP Info". And implement "Read CPU Info"
SCLP command. This data will be used by the guest to get information about hot
plugged cpus.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Define new SCLP codes to improve code readability.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
GTK uses different hardware keycodes on Windows hosts, so some special
handling is needed to get the QEMU keycode.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The original patch from Liu Jinsong restricted them to reset or full
state updates, but that's unnecessary (and wrong) since the BNDCFGS
MSR has no side effects.
Cc: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PulseAudio requires the use of shared memory so add shmget(), shmat(),
and shmdt() to the syscall whitelist.
Reported-by: xuhan@redhat.com
Signed-off-by: Paul Moore <pmoore@redhat.com>
The PulseAudio library attempts to do a mkdir(2) and fchmod(2) on
"/run/user/<UID>/pulse" which is currently blocked by the syscall
filter; this patch adds the two missing syscalls to the whitelist.
You can reproduce this problem with the following command:
# qemu -monitor stdio -device intel-hda -device hda-duplex
If watched under strace the following syscalls are shown:
mkdir("/run/user/0/pulse", 0700)
fchmod(11, 0700) [NOTE: 11 is the fd for /run/user/0/pulse]
Reported-by: xuhan@redhat.com
Signed-off-by: Paul Moore <pmoore@redhat.com>
VFIO virtualizes MSIX table for the guest but not mapping the part of
a BAR which contains an MSIX table. Since vfio_mmap_bar() mmaps chunks
before and after the MSIX table, they have to be aligned to the host
page size which may be TARGET_PAGE_MASK (4K) or 64K in case of PPC64.
This fixes boundaries calculations to use the real host page size.
Without the patch, the chunk before MSIX table may overlap with the MSIX
table and mmap will fail in the host kernel. The result will be serious
slowdown as the whole BAR will be emulated by QEMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There is a HOST_PAGE_ALIGN macro which makes sense for KVM accelerator
but it uses qemu_host_page_size/qemu_host_page_mask which initialized
for TCG only.
This moves qemu_host_page_size/qemu_host_page_mask initialization from
TCG's page_init() and adds a call for it from kvm_init().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
QEMU does not need and should not allocate memory for the ROM of a
passthrough PCI device. So this patch initialize the particular region
like any other PCI BAR of a passthrough device.
When a guest will access the ROM, Xen will take care of the IO, QEMU
will not be involved in it.
Xen set a limit of memory available for each guest, allocating memory
for a ROM can hit this limit.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The framebuffer is needlessly mapped (PROT_READ | PROT_WRITE), map it
PROT_READ instead.
The framebuffer is unmapped by replacing the framebuffer pages with
anonymous shared memory, calling mmap. Check for return errors and print
a warning.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This reverts commit d32934c84c.
The original implementation before this patch makes abortive error
messages much more friendly. The underlying bug that required this
change is now fixed. Revert.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The recent addition of util/error.c's dependency on error_report()
causes this test to fail to link due to a number of missing monitor
related symbols. All these symbols are however defined by libqemustub.
Add this libary to the link.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The vfio-pci initfn will currently succeed even if DMA mappings fail.
A typical reason for failure is if the user does not have sufficient
privilege to lock all the memory for the guest. In this case, the
device gets attached, but can only access a portion of guest memory
and is extremely unlikely to work.
DMA mappings are done via a MemoryListener, which provides no direct
error return path. We therefore stuff the errno into our container
structure and check for error after registration completes. We can
also test for mapping errors during runtime, but our only option for
resolution at that point is to kill the guest with a hw_error.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since 57271d63 we now see spurious mappings with the upper bits set
if 64bit PCI BARs are sized while enabled. The guest writes a mask
of 0xffffffff to the lower BAR to size it, then restores it, then
writes the same mask to the upper BAR resulting in a spurious BAR
mapping into the last 4G of the 64bit address space. Most
architectures do not support or make use of the full 64bits address
space for PCI BARs, so we filter out mappings with the high bit set.
Long term, we probably need to think about vfio telling us the
address width limitations of the IOMMU.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
SeaBIOS waits for LUN0 to respond to the TEST UNIT READY command
in order to decide whether it should part of the boot sequence.
If LUN0 does not respond to the command, boot is delayed by up
to 5 seconds. This currently happens when there is no LUN0 on
a target. Fix that by adding a trivial implementation of the
command.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set SelectiveSuspendEnabled registy entry to one.
This makes Windows use remote suspend by default,
without manual registry fiddeling.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for special usb descriptors used by microsoft
windows. They allow more fine-grained control over driver binding and
adding entries to the registry for configuration.
As this is a guest-visible change the "msos-desc" compat property
has been added to turn this off for 1.7 + older
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
BIOS files are not directly executable, so they don't need this flag.
All other BIOS files don't use the execute flag.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
addrlen parameter of recvfrom() of type socklen_t* was read into
variable of type socklen_t, that caused zeroing out of upper 4 bytes
when running s390x on top of x86_64. This patch changes addrlen type
to abi_ulong.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
optlen parameter of getsockopt() of type socklen_t* was read into
variable of type socklen_t, that caused zeroing out of upper 4 bytes
when running s390x on top of x86_64. This patch changes optlen type
to abi_ulong.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This notably fix IDE CD probing on the Plan 9 operating system,
which rely on the error register set by the Execute Device
Diagnostic command to detect drive configurations.
Thanks to Rémi Pommarel for reporting this issue.
Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
cpu_physical_memory_set_dirty_lebitmap calls getpageaddr and ffsl which are
unavailable for MinGW. As the function is unused for MinGW, it can simply
be excluded from compilation.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The default machine-type (pc-i440fx-2.0) now requires bios-256k.bin, but
"make install" isn't installing it, so qemu-system-x86_64 won't run out
of the box. Add it to BLOBS so it gets installed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: William Dauchy <william@gandi.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
During lazy rom loading, if rom read fails, and the
guest attempts a read again, vfio will again attempt it.
Add a boolean to prevent this. There could be a case where
a failed rom read might succeed the next time because of
a device reset or such, but it's best to exclude unpredictable
behavior
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If the device rom can't be read, report an error to the
user. This alerts the user that the device has a bad
state that is causing rom read failure or option rom
loading has been disabled from the device boot menu
(among other reasons).
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Somehow this has been lurking for a while; we remove our subregions
from the base BAR and VGA region mappings, but we don't destroy them,
creating a leak and more serious problems when we try to migrate after
removing these devices. Add the trivial bit of final cleanup to
remove these entirely.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The @addr here is a guest physical address and can easily be bigger
than 4G.
This changes uint32_t to hwaddr.
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Upstreaming this change from Android (https://android-review.googlesource.com/54211).
On heavily loaded machines with many VM instances we see KVM_CREATE_VM
failing with EINTR on this path:
kvm_dev_ioctl_create_vm -> kvm_create_vm -> kvm_init_mmu_notifier -> mmu_notifier_register -> do_mmu_notifier_register -> mm_take_all_locks
which checks if any signals have been raised while it was attaining locks
and returns EINTR. Retrying the system call greatly improves reliability.
Cc: qemu-stable@nongnu.org
Signed-off-by: thomas knych <thomaswk@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To suppport reopen(), the .bdrv_reopen_prepare() stub must exist.
iSCSI does not have anything that needs to be done to support reopen,
so we can just implement the _prepare() stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, an unplug can cause events to be dropped, which
leads to an assertion failure when preparing to notify the guest
kernel.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is still a small window that occurs when a cancel I/O affects
an asynchronous I/O operation that hasn't started. In other words,
when the residual data length equals the expected data length.
Today, the routine virtio_scsi_command_complete fails because the
VirtIOSCSIReq pointer (from the hba_private field in SCSIRequest)
was cleared earlier when virtio_scsi_complete_req was called by
the virtio_scsi_request_cancelled routine. As a result, the
virtio_scsi_command_complete routine needs to simply return when
it is processing a SCSIRequest block that was marked canceled.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some emulated disk operations (MODE SELECT, UNMAP, WRITE SAME)
can trigger asynchronous I/Os. Provide the cancel_io callback
to ensure that AIOCBs are properly cleaned up.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
[Tweak commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use fprintf(stderr instead. This removes dependency of libqemuutil.a
on the monitor.
We can further justify this change, in that this code path should only
trigger under a fatal error condition. fprintf-stderr is probably the
appropriate medium as under a fatal error conidition the monitor itself
may be down and out for the count. So assertion failure messages should
go lowest common denominator - straight to stderr.
Fixes the build as reported by Kevin Wolf. Issue debugged and change
suggested by Luiz Capitulino. Issue introduced by
5d24ee70bc.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This patch uses inbound GPIO lines (IRQ and FIR) for
interrupts instead of using the old pic_cpu method,
which doesn't correspond to real hardware.
This creates the CPU's inbound IRQ and FIR GPIO lines and
updates the Microblaze boards to use this new method.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reveiwed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Switch the ARMCPUInfo arrays in cpu.c and cpu64.c to use a terminator
entry rather than looping based on ARRAY_SIZE. The latter causes
compile warnings on some versions of gcc if the configure options
happen to result in an empty array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
migration.next for 20140113
# gpg: Signature made Mon 13 Jan 2014 09:38:27 AM PST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* quintela/tags/migration/20140113: (49 commits)
migration: synchronize memory bitmap 64bits at a time
ram: split function that synchronizes a range
memory: syncronize kvm bitmap using bitmaps operations
memory: move bitmap synchronization to its own function
kvm: refactor start address calculation
kvm: use directly cpu_physical_memory_* api for tracking dirty pages
memory: unfold memory_region_test_and_clear()
memory: split cpu_physical_memory_* functions to its own include
memory: cpu_physical_memory_set_dirty_tracking() should return void
memory: make cpu_physical_memory_reset_dirty() take a length parameter
memory: s/dirty/clean/ in cpu_physical_memory_is_dirty()
memory: cpu_physical_memory_clear_dirty_range() now uses bitmap operations
memory: cpu_physical_memory_set_dirty_range() now uses bitmap operations
memory: use find_next_bit() to find dirty bits
memory: s/mask/clear/ cpu_physical_memory_mask_dirty_range
memory: cpu_physical_memory_get_dirty() is used as returning a bool
memory: make cpu_physical_memory_get_dirty() the main function
memory: unfold cpu_physical_memory_set_dirty_flag()
memory: unfold cpu_physical_memory_set_dirty() in its only user
memory: unfold cpu_physical_memory_clear_dirty_flag() in its only user
...
Message-id: 1389634834-24181-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This function is the only bit where we care about speed.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
If bitmaps are aligned properly, use bitmap operations. If they are
not, just use old bit at a time code.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
We want to have all the functions that handle directly the dirty
bitmap near. We will change it later.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Performance is important in this function, and we want to optimize even further.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
All the functions that use ram_addr_t should be here.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Result was always 0, and not used anywhere. Once there, use bool type
for the parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
We have an end parameter in all the callers, and this make it coherent
with the rest of cpu_physical_memory_* functions, that also take a
length parameter.
Once here, move the start/end calculation to
tlb_reset_dirty_range_all() as we don't need it here anymore.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
We were setting a range of bits, so use bitmap_set().
Note: xen has always been wrong, and should have used start instead
of addr from the beginning.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
And make cpu_physical_memory_get_dirty_flag() to use it. It used to
be the other way around.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
After all the previous patches, spliting the bitmap gets direct.
Note: For some reason, I have to move DIRTY_MEMORY_* definitions to
the beginning of memory.h to make compilation work.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
For historical reasons it was bit 3. Once there, create a constant to
know the number of clients.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
So remove the flag argument and do it directly. After this change,
there is nothing else using cpu_physical_memory_set_dirty_flags() so
remove it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Move index and size fields from int to long. We need that for
migration. long is 64 bits on sane architectures, and 32bits should
be enough on all the 32bits architectures.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
This will allow unit tests to be written for VMState code without
pulling dependencies from the savevm code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The VMState code will be moved to vmstate.c and it uses some of the
QEMU_VM_* constants, so move it to a header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The QEMUFile code will be moved to qemu-file.c. This will require making
the following functions non-static because they are used by the savevm.c
code:
* qemu_peek_byte()
* qemu_peek_buffer()
* qemu_file_skip()
* qemu_file_set_error()
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The migration thread appears to want to allow writeout to occur at full
speed rather than being rate limited during completion of state saving,
but sets the limit to INT_MAX when xfer_limit is INT64_MAX. This causes
problems if there's more than 2GB of state left to save at this point. It
probably ought to just be INT64_MAX instead.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Avoid a bogus COMPLETED->CANCELLED transition.
There is a period of time from the timing of setting COMPLETED state to that of migration thread exits, so during which it's problematic in COMPLETED->CANCELLED transition.
Signed-off-by: Zeng Junliang <zengjunliang@huawei.com>
Signed-off-by: Zhang Haoyu <haoyu.zhang@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
cocoa queue:
* pass command key to guest when VM has mousegrab
* add .qcow2 to extension list for image load dialog
* fix bugs in code for starting QEMU via image load dialog
* fix resize/redraw interaction
* draw window black if guest hasn't sent anything to screen
* minor style/typo fixes
* add myself as cocoa co-maintainer
# gpg: Signature made Sun 12 Jan 2014 02:45:52 PM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
* pmaydell/tags/pull-cocoa-20140112:
MAINTAINERS: add myself as cocoa UI co-maintainer
ui/cocoa: Remove stray tabs
ui/cocoa: Draw black rectangle if we have no data yet
ui/cocoa: Redraw at correct size when switching surface
ui/cocoa: Fix code for starting QEMU via image file load dialog
ui/cocoa: Add ".qcow2" to extension list for image load dialog
ui/cocoa: Send warning message to stderr, not stdout
ui/cocoa: Correct typos in comments and variable names
ui/cocoa: Pass command key through to guest when VM has mousegrab
Message-id: 1389567158-31066-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
target-arm queue:
* build fix for bigendian hosts
# gpg: Signature made Sun 12 Jan 2014 01:38:22 PM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
* pmaydell/tags/pull-target-arm-20140112:
arm: fix compile on bigendian host
Message-id: 1389562970-30944-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
If our redraw method is called before we have any data from the guest,
then draw a black rectangle rather than leaving the window empty.
This mostly only matters when the guest machine has no framebuffer
device, but it is more in line with the behaviour of other QEMU UIs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387853507-26298-3-git-send-email-peter.maydell@linaro.org
If the surface switch involved a resize, we were doing the redraw
at the old size rather than the new, because the update of
screen.width and screen.height was being done after the setFrame
method calls which triggered a redraw. Normally this isn't very
noticeable because typically after the guest triggers the window
resize it also draws something to it, which will in turn cause
us to redraw. However, the combination of a guest which never
draws to the display and a command line setting of a screen size
larger than the default can reveal odd effects.
Move most of the handling of resizes to the top of the method,
and guard it with a check that the surface size actually changed,
to avoid unnecessary operations (including some user visible ones
like "recenter the window on the screen") if the surface is the
same size as the old one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387853507-26298-2-git-send-email-peter.maydell@linaro.org
Fix a number of bugs in the code for starting QEMU via the image
file load dialog:
* use the actual argv[0] rather than "qemu": this avoids failures to
find BIOS image files caused by not looking in the correct directory
relative to the executable path
* allocate a large enough argv array to NULL terminate it
* use g_strdup(X) rather than g_strdup_printf("%s", X) or
g_strdup_printf(X)
* disable the printing of the simulated command line argument
(which is presumably intended for debug only)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-6-git-send-email-peter.maydell@linaro.org
The guest might want to be able to use the command key for its won
purposes (as command if it is MacOS X, or for the Windows key if
it is a PC guest, for instance). In line with other UI frontends,
pass it through if the guest has mousegrab, and only use it for UI
menu accelerators if not grabbed.
Thanks to John Arbuckle for reporting this problem, helping
us work through what the best solution would be and providing
a patch which was the initial inspiration for this one.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-2-git-send-email-peter.maydell@linaro.org
* stefanha/block:
commit: Remove unused check
qemu-iotests: Update test cases for commit active
commit: Support commit active layer
block: Add commit_active_start()
mirror: Move base to MirrorBlockJob
mirror: Don't close target
qemu-iotests: drop duplicate virtio-blk initialization failure
vmdk: Allow vmdk_create to work with protocol
vmdk: Check VMFS extent line field number
docs: updated qemu-img man page and qemu-doc to reflect VHDX support.
block: vhdx - improve error message, and .bdrv_check implementation
block/iscsi: Fix compilation for libiscsi 1.4.0 (API change)
qapi-schema: fix QEMU 1.8 references
dataplane: replace hostmem with memory_region_find
dataplane: change vring API to use VirtQueueElement
vring: factor common code for error exits
vring: create a common function to parse descriptors
sheepdog: fix dynamic grow for running qcow2 format
Message-id: 1387554416-5837-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
acpi,pci,pc,fedora,virtio fixes and enhancements
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony:
target-arm: fix build with gcc 4.8.2
virtio: add back call to virtio_bus_device_unplugged
piix: fix 32bit pci hole
qdev: switch reset to post-order
qdev: allow both pre- and post-order vists in qdev walking functions
pci: clean up resetting of IRQs
pci: do not export pci_bus_reset
ACPI/DSDT-CPU: cleanup bogus comment
ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler
acpi: ich9: allow guest to clear SCI rised by GPE
acpi: factor out common pm_update_sci() into acpi core
acpi: piix4: remove not needed GPE0 mask
i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash
i440fx-test: generate temporary firmware blob
i440fx-test: give each GTest case its own qtest
i440fx-test: qtest_start() should be paired with qtest_end()
hw/i386/pc_sysfw: support two flash drives
pc_piix: document gigabyte_align
piix: gigabyte alignment for ram
Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
QOM CPUState refactorings / X86CPU
* TLB invalidation optimizations
* X86CPU initialization cleanups
* Preparations for X86CPU hot-unplug
# gpg: Signature made Tue 24 Dec 2013 04:51:52 AM PST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 174F 0347 1BCC 221A 6175 6F96 FA2E D12D 3E7E 013F
* afaerber/tags/qom-cpu-for-anthony:
target-i386: Cleanup 'foo=val' feature handling
target-i386: Cleanup 'foo' feature handling
target-i386: Convert 'check' and 'enforce' to static properties
target-i386: Convert 'hv_spinlocks' to static property
target-i386: Convert 'hv_vapic' to static property
target-i386: Convert 'hv_relaxed' to static property
cpu-exec: Optimize X86CPU usage in cpu_exec()
target-i386: Move apic_state field from CPUX86State to X86CPU
cputlb: Tidy memset() of arrays
cputlb: Use memset() when flushing entries
target-arm queue:
* further A64 decoder patches, including enabling the aarch64-linux-user
target; this includes full floating point support. Neon is not yet
supported.
* cadence UART model fixes.
* some minor bug fixes and cleanups.
* all the softfloat fixes required by the new A64 instructions;
several of these will also be used by PPC.
* pmaydell/tags/pull-target-arm-20140107: (61 commits)
target-arm: A64: Add support for FCVT between half, single and double
target-arm: A64: Add 1-source 32-to-32 and 64-to-64 FP instructions
target-arm: A64: Add floating-point<->integer conversion instructions
target-arm: A64: Add floating-point<->fixed-point instructions
target-arm: A64: Add extra VFP fixed point conversion helpers
target-arm: Ignore most exceptions from scalbn when doing fixpoint conversion
target-arm: Rename A32 VFP conversion helpers
target-arm: Prepare VFP_CONV_FIX helpers for A64 uses
softfloat: Add support for ties-away rounding
softfloat: Refactor code handling various rounding modes
softfloat: Add float16 <=> float64 conversion functions
softfloat: Factor out RoundAndPackFloat16 and NormalizeFloat16Subnormal
softfloat: Provide complete set of accessors for fp state
softfloat: Fix float64_to_uint32_round_to_zero
softfloat: Fix float64_to_uint32
softfloat: Fix float64_to_uint64_round_to_zero
softfloat: Add float32_to_uint64()
softfloat: Fix factor 2 error for scalbn on denormal inputs
softfloat: Only raise Invalid when conversions to int are out of range
softfloat: Fix float64_to_uint64
...
Conflicts:
target-arm/cpu.h
aliguori: resolved trivial conflict
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
QOM infrastructure fixes and device conversions
* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model
# gpg: Signature made Tue 24 Dec 2013 09:04:05 AM PST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 174F 0347 1BCC 221A 6175 6F96 FA2E D12D 3E7E 013F
* afaerber/tags/qom-devices-for-anthony: (24 commits)
qdev-monitor: Improve error message for -device nonexistant
ioapic: QOM'ify ioapic
ioapic: Cleanup for QOM'ification
icc_bus: QOM'ify ICC
apic: QOM'ify APIC
apic: Cleanup for QOM'ification
qdev: Drop misleading qbus_free() function
qom: Detect bad reentrance during object_class_foreach()
tests: Test QOM interface casting
qom: Do not register interface "types" in the type table and fix names
qom: Split out object and class caches
qdev: Document that pointer properties kill device_add
hw: cannot_instantiate_with_device_add_yet due to pointer props
qdev-monitor: Avoid device_add crashing on non-device driver name
qdev: Do not let the user try to device_add when it cannot work
isa: Clean up use of cannot_instantiate_with_device_add_yet
vt82c686: Clean up use of cannot_instantiate_with_device_add_yet
piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
ich9: Document why cannot_instantiate_with_device_add_yet
pci-host: Consistently set cannot_instantiate_with_device_add_yet
...
* mjt/trivial-patches:
acpi unit-test: Remove temporary disk after test
mainstone: Fix duplicate array values for key 'space'
pxa27x: Add 'const' attribute to keyboard maps
pxa27x: Reduce size of keyboard matrix mapping
doc: Mention chardev:id in available devices for -serial
configure: Python tests must be done before help message
configure: Rewrite code for help message
fix -boot strict regressed in commit 6ef4716
vl: make boot_strict variable static (not used outside vl.c)
x86: only allow real mode to access 32bit without LMA
linux-user: Use macro TARGET_NSIG_WORDS where possible
exynos4210: Use macro ARRAY_SIZE where possible
ui/cocoa: Use macro ARRAY_SIZE where possible
misc: Use macro ARRAY_SIZE where possible
openrisc: Fix spelling in comment (transaltion -> translation)
hw/arm/highbank: Simplify code (memory region in device state)
Message-id: 1388182050-10270-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
target-arm queue:
* further A64 decoder patches, including enabling the aarch64-linux-user
target; this includes full floating point support. Neon is not yet
supported.
* cadence UART model fixes.
* some minor bug fixes and cleanups.
* all the softfloat fixes required by the new A64 instructions;
several of these will also be used by PPC.
# gpg: Signature made Wed 08 Jan 2014 11:25:12 AM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
* pmaydell/tags/pull-target-arm-20140108: (76 commits)
target-arm: A64: Add support for FCVT between half, single and double
target-arm: A64: Add 1-source 32-to-32 and 64-to-64 FP instructions
target-arm: A64: Add floating-point<->integer conversion instructions
target-arm: A64: Add floating-point<->fixed-point instructions
target-arm: A64: Add extra VFP fixed point conversion helpers
target-arm: Ignore most exceptions from scalbn when doing fixpoint conversion
target-arm: Rename A32 VFP conversion helpers
target-arm: Prepare VFP_CONV_FIX helpers for A64 uses
softfloat: Add support for ties-away rounding
softfloat: Refactor code handling various rounding modes
softfloat: Add float16 <=> float64 conversion functions
softfloat: Factor out RoundAndPackFloat16 and NormalizeFloat16Subnormal
softfloat: Provide complete set of accessors for fp state
softfloat: Fix float64_to_uint32_round_to_zero
softfloat: Fix float64_to_uint32
softfloat: Fix float64_to_uint64_round_to_zero
softfloat: Add float32_to_uint64()
softfloat: Fix factor 2 error for scalbn on denormal inputs
softfloat: Only raise Invalid when conversions to int are out of range
softfloat: Fix float64_to_uint64
...
Message-id: 1389209439-25448-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Add support for FCVT between half, single and double precision.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for those instructions in the "Floating-point
data-processing (1 source)" group which are simple 32-bit-to-32-bit
or 64-bit-to-64-bit operations (ie everything except FCVT between
single/double/half precision).
We put the new round-to-int helpers in helper.c because they will
also be used by the new ARMv8 A32/T32 rounding instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches,
updated to new infrastructure.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: reworked decode, split FCVT out into their own patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the AArch64 floating-point <-> integer conversion
instructions to disas_fpintconv. In the process we can rearrange
and simplify the detection of unallocated encodings a little.
We also correct a typo in the instruction encoding diagram for this
instruction group: bit 21 is 1, not 0.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the instruction group labeled
"Floating-point <-> fixed-point conversions" in the ARM ARM.
Namely this includes the instructions SCVTF, UCVTF, FCVTZS, FCVTZU
(scalar, fixed-point).
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased, updated to new infrastructure.
Applied bug fixes from Michael Matz and Janne Grunau.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: significant cleanup]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Define the full set of floating point to fixed point conversion
helpers required to support AArch64.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The VFP fixed point conversion helpers first call float_scalbn and
then convert the result to an integer. This scalbn operation may
set floating point exception flags for:
* overflow & inexact (if it overflows to infinity)
* input denormal squashed to zero
* output denormal squashed to zero
Of these, we only care about the input-denormal flag, since
the output of the whole scale-and-convert operation will be
an integer (so squashed-output-denormal and overflow don't
apply). Suppress the others by saving the pre-scalb exception
flags and only copying across a potential input-denormal flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The VFP conversion helpers for A32 round to zero as this is the only
rounding mode supported. Rename these helpers to make it clear that
they round to zero and are not suitable for use in the AArch64 code.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Make the VFP_CONV_FIX helpers a little more flexible in
preparation for the A64 uses. This requires two changes:
* use the correct softfloat conversion function based on itype
rather than always the int32 one; this is possible now that
softfloat provides int16 versions and necessary for the
future conversion-to-int64 A64 variants. This also allows
us to drop the awkward 'sign' macro argument.
* split the 'fsz' argument which currently controls both
width of the input float type and width of the output
integer type into two; this will allow us to specify the
A64 64-bit-int-to-single conversion function, where the
two widths are different.
We can also drop the (itype##_t) cast now that softfloat
guarantees that all the itype##_to_float* functions take
an integer argument of exactly the correct type.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
IEEE754-2008 specifies a new rounding mode:
"roundTiesToAway: the floating-point number nearest to the infinitely
precise result shall be delivered; if the two nearest floating-point
numbers bracketing an unrepresentable infinitely precise result are
equally near, the one with larger magnitude shall be delivered."
Implement this new mode (it is needed for ARM). The general principle
is that the required code is exactly like the ties-to-even code,
except that we do not need to do the "in case of exact tie clear LSB
to round-to-even", because the rounding operation naturally causes
the exact tie to round up in magnitude.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Refactor the code in various functions which calculates rounding
increments given the current rounding mode, so that instead of a
set of nested if statements we have a simple switch statement.
This will give us a clean place to add the case for the new
tiesAway rounding mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the conversion functions float16_to_float64() and
float64_to_float16(), which will be needed for the ARM
A64 instruction set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding conversions between float16 and float64,
factor out code currently done inline in the float16<=>float32
conversion functions into functions RoundAndPackFloat16 and
NormalizeFloat16Subnormal along the lines of the existing versions
for the other float types.
Note that we change the handling of zExp from the inline code
to match the API of the other RoundAndPackFloat functions; however
we leave the positioning of the binary point between bits 22 and 23
rather than shifting it up to the high end of the word.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tidy up the get/set accessors for the fp state to add missing ones
and make them all inline in softfloat.h rather than some inline and
some not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint32_round_to_zero routine is incorrect.
For example, the following test pattern:
425F81378DC0CD1F / 0x1.f81378dc0cd1fp+38
will erroneously set the inexact flag.
This patch re-implements the routine to use the float64_to_uint64_round_to_zero
routine. If saturation occurs we ignore any flags set by the
conversion function and raise only Invalid.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-6-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint32 has several flaws:
- for numbers between 2**32 and 2**64, the inexact exception flag
may get incorrectly set. In this case, only the invalid flag
should be set.
test pattern: 425F81378DC0CD1F / 0x1.f81378dc0cd1fp+38
- for numbers between 2**63 and 2**64, incorrect results may
be produced:
test pattern: 43EAAF73F1F0B8BD / 0x1.aaf73f1f0b8bdp+63
This patch re-implements float64_to_uint32 to re-use the
float64_to_uint64 routine (instead of float64_to_int64). For the
saturation case, we ignore any flags which the conversion routine
has set and raise only the invalid flag.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-5-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint64_round_to_zero routine is incorrect.
For example, the following test pattern:
46697351FF4AEC29 / 0x1.97351ff4aec29p+103
currently produces 8000000000000000 instead of FFFFFFFFFFFFFFFF.
This patch re-implements the routine to temporarily force the
rounding mode and use the float64_to_uint64 routine.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-4-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds the float32_to_uint64() routine, which converts a
32-bit floating point number to an unsigned 64 bit number.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed harmless but silly int64_t casts]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
If the input to float*_scalbn() is denormal then it represents
a number 0.[mantissabits] * 2^(1-exponentbias) (and the actual
exponent field is all zeroes). This means that when we convert
it to our unpacked encoding the unpacked exponent must be one
greater than for a normal number, which represents
1.[mantissabits] * 2^(e-exponentbias) for an exponent field e.
This meant we were giving answers too small by a factor of 2 for
all denormal inputs.
Note that the float-to-int routines also have this behaviour
of not adjusting the exponent for denormals; however there it is
harmless because denormals will all convert to integer zero anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We implement a number of float-to-integer conversions using conversion
to an integer type with a wider range and then a check against the
narrower range we are actually converting to. If we find the result to
be out of range we correctly raise the Invalid exception, but we must
also suppress other exceptions which might have been raised by the
conversion function we called.
This won't throw away exceptions we should have preserved, because for
the 'core' exception flags the IEEE spec mandates that the only valid
combinations of exception that can be raised by a single operation are
Inexact + Overflow and Inexact + Underflow. For the non-IEEE softfloat
flag for input denormals, we can guarantee that that flag won't have
been set for out of range float-to-int conversions because a squashed
denormal by definition goes to plus or minus zero, which is always in
range after conversion to integer zero.
This bug has been fixed for some of the float-to-int conversion routines
by previous patches; fix it for the remaining functions as well, so
that they all restore the pre-conversion status flags prior to raising
Invalid.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The comment preceding the float64_to_uint64 routine suggests that
the implementation is broken. And this is, indeed, the case.
This patch properly implements the conversion of a 64-bit floating
point number to an unsigned, 64 bit integer.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Currently the int-to-float functions take types which are specified
as "at least X bits wide", rather than "exactly X bits wide". This is
confusing and unhelpful since it means that the callers have to include
an explicit cast to [u]intXX_t to ensure the correct behaviour. Fix
them all to take the exactly-X-bits-wide types instead.
Note that this doesn't change behaviour at all since at the moment
we happen to define the 'int32' and 'uint32' types as exactly 32 bits
wide, and the 'int64' and 'uint64' types as exactly 64 bits wide.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the float to 16 bit integer conversion routines. These can be
trivially implemented in terms of the int32_to_float* routines, but
providing them makes our API more symmetrical and can simplify callers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
ARMv8 requires support for converting 32 and 64bit floating point
values to signed and unsigned 16bit integers.
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: updated not to incorrectly set Inexact for Invalid inputs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Our float32 to float16 conversion routine was generating the correct
numerical answers, but not always setting the right set of exception
flags. Fix this, mostly by rearranging the code to more closely
resemble RoundAndPackFloat*, and in particular:
* non-IEEE halfprec always raises Invalid for input NaNs
* we need to check for the overflow case before underflow
* we weren't getting the tininess-detected-after-rounding
case correct (somewhat academic since only ARM uses halfprec
and it is always tininess-detected-before-rounding)
* non-IEEE halfprec overflow raises only Invalid, not
Invalid + Inexact
* we weren't setting Inexact when we should
Also add some clarifying comments about what the code is doing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
commit 5ce4f35781
"target-arm: A64: add set_pc cpu method"
introduces an array aarch64_cpus which is zero
size if this code is built without CONFIG_USER_ONLY.
In particular an attempt to iterate over this array produces a warning
under gcc 4.8.2:
CC aarch64-softmmu/target-arm/cpu64.o
/scm/qemu/target-arm/cpu64.c: In function ‘aarch64_cpu_register_types’:
/scm/qemu/target-arm/cpu64.c:124:5: error: comparison of unsigned
expression < 0 is always false [-Werror=type-limits]
for (i = 0; i < ARRAY_SIZE(aarch64_cpus); i++) {
^
cc1: all warnings being treated as errors
This is the result of ARRAY_SIZE being an unsigned type,
causing "i" to be promoted to unsigned int as well.
As zero size arrays are a gcc extension, it seems
cleanest to add a dummy element with NULL name,
and test for it during registration.
We'll be able to drop this when we add more CPUs.
Cc: Alexander Graf <agraf@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20131223145216.GA22663@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't conditionalise GEM instantiation on networking attachments. The
device should always be present even if not attached to a network.
This allows for probing of the device by expectant guests (such as
OS's). This is needed because sysbus (or AXI in Xilinx's real hw case)
is not self identifying so the guest has no dynamic way of detecting
device absence.
Also allows for testing of the GEM in loopback mode with -net none.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 55649779a68ee3ff54b24c339b6fdbdccd1f0ed7.1388800598.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The can_receive logic was only taking into account the RxFIFO
occupancy. RxFIFO population is only used for the echo and normal modes
however. Improve the logic to correctly return the true number of
receivable characters based on the current mode:
Normal mode: RxFIFO vacancy.
Remote loopback: TxFIFO vacancy.
Echo mode: The min of the TxFIFO and RxFIFO vacancies.
Local Loopback: Return non-zero (to implement droppage)
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 36a58440c9ca5080151e95765c2c81342de8a8df.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tx timer implementation is flawed. Despite the controller
attempting to time the guest visable assertion of the TX-empty status
bit (and corresponding interrupt) the controller is still transmitting
characters instantaneously. There is also no sense of multiple character
delay.
The only side effect of this timer is assertion of tx-empty status. So
just remove the timer completely and hold tx-empty as permanently
asserted (its reset status). This matches the actual behaviour of
instantaneous transmission.
While we are VMSD version bumping, add the tx_fifo as device state to
prepare for upcomming TxFIFO flow control. Implement the interrupt
generation logic for the TxFIFO occupancy.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7a208a7eb8d79d6429fe28b1396c3104371807b2.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When setting rounding modes we currently just hardcode the numeric values
for rounding modes in a big switch statement.
With AArch64 support coming, we will need to refer to these rounding modes
at different places throughout the code though, so let's better give them
names so we don't get confused by accident.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, use names from ARM ARM.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the fmov instruction working on scalars
with an immediate payload.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebase and use new infrastructure.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Floating-point data-processing (3 source)"
group of instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches.
Implement using muladd as suggested by Richard Henderson.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: pull field decode up a level, use register accessors]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Floating-point data-processing (2 source)"
group of instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merge single and double precision patches. Rebase
and update to new infrastructure. Incorporate FMIN/FMAX support patch by
Michael Matz.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM:
* added convenience accessors for FP s and d regs
* pulled the field decode and opcode validity check up a level]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Use the VFP_BINOP macro to provide helpers for min, max, minnum
and maxnum, rather than hand-rolling them. (The float64 max
version is not used by A32 but will be needed for A64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The A64 128 bit vector registers are stored as a pair of
uint64_t values in the register array. This means that if
we're directly loading or storing a value of size less than
64 bits we must adjust the offset appropriately to account
for whether the host is bigendian or not. Provide utility
functions to abstract away the offsetof() calculations for
the FP registers.
For do_fp_st() we can sidestep most of the issues for 64 bit
and smaller reg-to-mem transfers by always doing a 64 bit
load from the register and writing just the piece we need
to memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When dumping the current CPU state, we can also get a request
to dump the FPU state along with the CPU's integer state.
Add support to dump the VFP state when that flag is set, so that
we can properly debug code that modifies floating point registers.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased. Output all registers, two per-line.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add a config for aarch64-linux-user, thereby enabling it as
a valid target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Now the AArch64 targets are in mainline we can include them in our
Travis test matrix.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the helpers provided for getting the correct FPSR and FPCR
values for the signal context.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The AArch64 linux-user support was written before but merged after
commit 4ce6243dc6 which cleaned up the handling of the clone()
syscall argument order, so we failed to notice that AArch64 also needs
TARGET_CLONE_BACKWARDS to be defined. Add this define so that clone
and fork syscalls work correctly.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This implement exclusive loads/stores for aarch64 along the lines of
arm32 and ppc implementations. The exclusive load remembers the address
and loaded value. The exclusive store throws an an exception which uses
those values to check for equality in a proper exclusive region.
This is not actually the architecture mandated semantics (for either
AArch32 or AArch64) but it is close enough for typical guest code
sequences to work correctly, and saves us from having to monitor all
guest stores. It's fairly easy to come up with test cases where we
don't behave like hardware - we don't for example model cache line
behaviour. However in the common patterns this works, and the existing
32 bit ARM exclusive access implementation has the same limitations.
AArch64 also implements new acquire/release loads/stores (which may be
either exclusive or non-exclusive). These imposes extra ordering
constraints on memory operations (ie they act as if they have an implicit
barrier built into them). As TCG is single-threaded all our barriers
are no-ops, so these just behave like normal loads and stores.
Signed-off-by: Michael Matz <matz@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.
The changes in semantics for the variables are:
exclusive_addr -> extended to 64 bits; -1ULL for "monitor lost",
otherwise always < 2^32 for AArch32
exclusive_val -> extended to 64 bits. 64 bit exclusives in AArch32 now
use the high half of exclusive_val instead of a separate exclusive_high
exclusive_high -> is no longer used in AArch32; extended to 64 bits as
it will be needed for AArch64's pair-of-64-bit-values exclusives.
exclusive_test -> extended to 64 bits, as it is an address. Since this is
a linux-user-only field, in arm-linux-user it will always have the top
32 bits zero.
exclusive_info -> stays 32 bits, as it is neither data nor address, but
simply holds register indexes etc. AArch64 will be able to fit all its
information into 32 bits as well.
Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reduce ifdefs, share more code between paths, reduce the number of TCG
ops generated. Avoid re-computing the size of the operation across
gen_pop_T0 and gen_pop_update.
Add forgotten zero-extension in the TARGET_X86_64, !CODE64, ss32 case.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reduce ifdefs, share more code between paths, reduce the number of TCG
ops generated.
Add forgotten zero-extension in the TARGET_X86_64, !CODE64, ss32 case.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Unlike the addr32, there was no bug. But we can use the same
technique to reduce the number of TCG ops.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Changing the domain to TCGMemOp makes it easier to interoperate
with other portions of the rest of the translator.
We now only have one domain for size operands inside the translator,
which makes things less confusing all the way around. There are
still a number of helpers that continue to use the log2-1 domain.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change the domain of the parameter and update all callers.
Which lets us defer completely to gen_op_mov_reg_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Changing the domain to TCGMemOp makes it easier to interoperate
with other portions of the rest of the translator.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change the domain of the parameter and update all callers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
These functions used the aflags/dflags domain, which is log2-1
of the byte size. Confusingly, they used enumeration values
from the log2 domain.
Change the domain of the parameter and update all callers.
Since we're now in a common domain, defer the deposit/extend/mov
decision to gen_op_mov_reg_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The 'ot' variables (operand type?) hold the log2(byte size) of
the operand being manipulated. This is the same as the MO_SIZE
subset of the TCGMemOp. Indeed, we often pass 'ot' to the
tcg_gen_qemu_ld/st functions.
Changing the type from 'int' makes it easier to see what domain
the variable should be.
This does require adding some default cases to some switch statements,
to avoid the 'unhandled enumeration value' warning that would result
from the change of type.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace it with tcg_gen_ext16u_tl, and in two cases merge with a
previous move from cpu_regs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace it with tcg_gen_ext16u_tl. In four places we can combine that
with a previous move into cpu_T[0], and in one place we can infer that
the zero-extension has already happened via the previous load.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Propagate the definitions into all users. In two cases, this allows
us to share code between the 32-bit and 64-bit immediate moves.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Propagate the definitions into all users. The only time that
gen_op_movl_T1_imu was used, the input was type 'unsigned',
so the replacement works identically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Propagate the definition of gen_op_movl_T0_im to all users.
The function gen_op_movl_T0_imu was unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the known MO_32/MO_64 cases, we don't need to extend a 32-bit temp
into a 64-bit temp before storing into the hardware register.
We do need the extension for the MO_8/MO_16 cases, in order for the
deposit_tl operation to work, so leave those alone.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can now use tcg_gen_qemu_st_i32 directly to avoid the extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can now use tcg_gen_qemu_ld_i32 directly to avoid the truncation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the 16 and 32-bit cases, we don't need to truncate via
a temporary register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The reg_ptr and offset_ptr outputs are universally unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Always perform a sign-extending load. In the extremely unlikely
case that we've used an 0x66 prefix, the extension to 64-bits is
unnecessary but not wrong; the store will still examine only 16 bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can use the MO_SIGN bit to tidy the reg-reg switch statement
as well as pass it on to gen_op_ld_v, eliminating one call.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
By inspection, obviously we should be storing T[1] not T[0].
This could only happen for x86_64 in 64-bit mode with 0x66
prefix to call insn -- i.e. never.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Too many places have the same test vs OR_TMP0 to indicate
a write back to memory. Hoist that to a subroutine.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace its users by gen_op_ld_v with the MO_SIGN bit set.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The MO_8/16/32/64 constants have the same encoding and meaning
as the OT_BYTE/WORD/LONG/QUAD. Since we rely on them being the
same, for the qemu_ld/st helpers, standardize on the common names.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add support for FCVT between half, single and double precision.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for those instructions in the "Floating-point
data-processing (1 source)" group which are simple 32-bit-to-32-bit
or 64-bit-to-64-bit operations (ie everything except FCVT between
single/double/half precision).
We put the new round-to-int helpers in helper.c because they will
also be used by the new ARMv8 A32/T32 rounding instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches,
updated to new infrastructure.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: reworked decode, split FCVT out into their own patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the AArch64 floating-point <-> integer conversion
instructions to disas_fpintconv. In the process we can rearrange
and simplify the detection of unallocated encodings a little.
We also correct a typo in the instruction encoding diagram for this
instruction group: bit 21 is 1, not 0.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the instruction group labeled
"Floating-point <-> fixed-point conversions" in the ARM ARM.
Namely this includes the instructions SCVTF, UCVTF, FCVTZS, FCVTZU
(scalar, fixed-point).
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased, updated to new infrastructure.
Applied bug fixes from Michael Matz and Janne Grunau.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: significant cleanup]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Define the full set of floating point to fixed point conversion
helpers required to support AArch64.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The VFP fixed point conversion helpers first call float_scalbn and
then convert the result to an integer. This scalbn operation may
set floating point exception flags for:
* overflow & inexact (if it overflows to infinity)
* input denormal squashed to zero
* output denormal squashed to zero
Of these, we only care about the input-denormal flag, since
the output of the whole scale-and-convert operation will be
an integer (so squashed-output-denormal and overflow don't
apply). Suppress the others by saving the pre-scalb exception
flags and only copying across a potential input-denormal flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The VFP conversion helpers for A32 round to zero as this is the only
rounding mode supported. Rename these helpers to make it clear that
they round to zero and are not suitable for use in the AArch64 code.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Make the VFP_CONV_FIX helpers a little more flexible in
preparation for the A64 uses. This requires two changes:
* use the correct softfloat conversion function based on itype
rather than always the int32 one; this is possible now that
softfloat provides int16 versions and necessary for the
future conversion-to-int64 A64 variants. This also allows
us to drop the awkward 'sign' macro argument.
* split the 'fsz' argument which currently controls both
width of the input float type and width of the output
integer type into two; this will allow us to specify the
A64 64-bit-int-to-single conversion function, where the
two widths are different.
We can also drop the (itype##_t) cast now that softfloat
guarantees that all the itype##_to_float* functions take
an integer argument of exactly the correct type.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
IEEE754-2008 specifies a new rounding mode:
"roundTiesToAway: the floating-point number nearest to the infinitely
precise result shall be delivered; if the two nearest floating-point
numbers bracketing an unrepresentable infinitely precise result are
equally near, the one with larger magnitude shall be delivered."
Implement this new mode (it is needed for ARM). The general principle
is that the required code is exactly like the ties-to-even code,
except that we do not need to do the "in case of exact tie clear LSB
to round-to-even", because the rounding operation naturally causes
the exact tie to round up in magnitude.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Refactor the code in various functions which calculates rounding
increments given the current rounding mode, so that instead of a
set of nested if statements we have a simple switch statement.
This will give us a clean place to add the case for the new
tiesAway rounding mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the conversion functions float16_to_float64() and
float64_to_float16(), which will be needed for the ARM
A64 instruction set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding conversions between float16 and float64,
factor out code currently done inline in the float16<=>float32
conversion functions into functions RoundAndPackFloat16 and
NormalizeFloat16Subnormal along the lines of the existing versions
for the other float types.
Note that we change the handling of zExp from the inline code
to match the API of the other RoundAndPackFloat functions; however
we leave the positioning of the binary point between bits 22 and 23
rather than shifting it up to the high end of the word.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tidy up the get/set accessors for the fp state to add missing ones
and make them all inline in softfloat.h rather than some inline and
some not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint32_round_to_zero routine is incorrect.
For example, the following test pattern:
425F81378DC0CD1F / 0x1.f81378dc0cd1fp+38
will erroneously set the inexact flag.
This patch re-implements the routine to use the float64_to_uint64_round_to_zero
routine. If saturation occurs we ignore any flags set by the
conversion function and raise only Invalid.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-6-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint32 has several flaws:
- for numbers between 2**32 and 2**64, the inexact exception flag
may get incorrectly set. In this case, only the invalid flag
should be set.
test pattern: 425F81378DC0CD1F / 0x1.f81378dc0cd1fp+38
- for numbers between 2**63 and 2**64, incorrect results may
be produced:
test pattern: 43EAAF73F1F0B8BD / 0x1.aaf73f1f0b8bdp+63
This patch re-implements float64_to_uint32 to re-use the
float64_to_uint64 routine (instead of float64_to_int64). For the
saturation case, we ignore any flags which the conversion routine
has set and raise only the invalid flag.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-5-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint64_round_to_zero routine is incorrect.
For example, the following test pattern:
46697351FF4AEC29 / 0x1.97351ff4aec29p+103
currently produces 8000000000000000 instead of FFFFFFFFFFFFFFFF.
This patch re-implements the routine to temporarily force the
rounding mode and use the float64_to_uint64 routine.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-4-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds the float32_to_uint64() routine, which converts a
32-bit floating point number to an unsigned 64 bit number.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed harmless but silly int64_t casts]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
If the input to float*_scalbn() is denormal then it represents
a number 0.[mantissabits] * 2^(1-exponentbias) (and the actual
exponent field is all zeroes). This means that when we convert
it to our unpacked encoding the unpacked exponent must be one
greater than for a normal number, which represents
1.[mantissabits] * 2^(e-exponentbias) for an exponent field e.
This meant we were giving answers too small by a factor of 2 for
all denormal inputs.
Note that the float-to-int routines also have this behaviour
of not adjusting the exponent for denormals; however there it is
harmless because denormals will all convert to integer zero anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We implement a number of float-to-integer conversions using conversion
to an integer type with a wider range and then a check against the
narrower range we are actually converting to. If we find the result to
be out of range we correctly raise the Invalid exception, but we must
also suppress other exceptions which might have been raised by the
conversion function we called.
This won't throw away exceptions we should have preserved, because for
the 'core' exception flags the IEEE spec mandates that the only valid
combinations of exception that can be raised by a single operation are
Inexact + Overflow and Inexact + Underflow. For the non-IEEE softfloat
flag for input denormals, we can guarantee that that flag won't have
been set for out of range float-to-int conversions because a squashed
denormal by definition goes to plus or minus zero, which is always in
range after conversion to integer zero.
This bug has been fixed for some of the float-to-int conversion routines
by previous patches; fix it for the remaining functions as well, so
that they all restore the pre-conversion status flags prior to raising
Invalid.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The comment preceding the float64_to_uint64 routine suggests that
the implementation is broken. And this is, indeed, the case.
This patch properly implements the conversion of a 64-bit floating
point number to an unsigned, 64 bit integer.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Currently the int-to-float functions take types which are specified
as "at least X bits wide", rather than "exactly X bits wide". This is
confusing and unhelpful since it means that the callers have to include
an explicit cast to [u]intXX_t to ensure the correct behaviour. Fix
them all to take the exactly-X-bits-wide types instead.
Note that this doesn't change behaviour at all since at the moment
we happen to define the 'int32' and 'uint32' types as exactly 32 bits
wide, and the 'int64' and 'uint64' types as exactly 64 bits wide.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the float to 16 bit integer conversion routines. These can be
trivially implemented in terms of the int32_to_float* routines, but
providing them makes our API more symmetrical and can simplify callers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
ARMv8 requires support for converting 32 and 64bit floating point
values to signed and unsigned 16bit integers.
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: updated not to incorrectly set Inexact for Invalid inputs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Our float32 to float16 conversion routine was generating the correct
numerical answers, but not always setting the right set of exception
flags. Fix this, mostly by rearranging the code to more closely
resemble RoundAndPackFloat*, and in particular:
* non-IEEE halfprec always raises Invalid for input NaNs
* we need to check for the overflow case before underflow
* we weren't getting the tininess-detected-after-rounding
case correct (somewhat academic since only ARM uses halfprec
and it is always tininess-detected-before-rounding)
* non-IEEE halfprec overflow raises only Invalid, not
Invalid + Inexact
* we weren't setting Inexact when we should
Also add some clarifying comments about what the code is doing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
commit 5ce4f35781
"target-arm: A64: add set_pc cpu method"
introduces an array aarch64_cpus which is zero
size if this code is built without CONFIG_USER_ONLY.
In particular an attempt to iterate over this array produces a warning
under gcc 4.8.2:
CC aarch64-softmmu/target-arm/cpu64.o
/scm/qemu/target-arm/cpu64.c: In function ‘aarch64_cpu_register_types’:
/scm/qemu/target-arm/cpu64.c:124:5: error: comparison of unsigned
expression < 0 is always false [-Werror=type-limits]
for (i = 0; i < ARRAY_SIZE(aarch64_cpus); i++) {
^
cc1: all warnings being treated as errors
This is the result of ARRAY_SIZE being an unsigned type,
causing "i" to be promoted to unsigned int as well.
As zero size arrays are a gcc extension, it seems
cleanest to add a dummy element with NULL name,
and test for it during registration.
We'll be able to drop this when we add more CPUs.
Cc: Alexander Graf <agraf@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20131223145216.GA22663@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't conditionalise GEM instantiation on networking attachments. The
device should always be present even if not attached to a network.
This allows for probing of the device by expectant guests (such as
OS's). This is needed because sysbus (or AXI in Xilinx's real hw case)
is not self identifying so the guest has no dynamic way of detecting
device absence.
Also allows for testing of the GEM in loopback mode with -net none.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 55649779a68ee3ff54b24c339b6fdbdccd1f0ed7.1388800598.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The can_receive logic was only taking into account the RxFIFO
occupancy. RxFIFO population is only used for the echo and normal modes
however. Improve the logic to correctly return the true number of
receivable characters based on the current mode:
Normal mode: RxFIFO vacancy.
Remote loopback: TxFIFO vacancy.
Echo mode: The min of the TxFIFO and RxFIFO vacancies.
Local Loopback: Return non-zero (to implement droppage)
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 36a58440c9ca5080151e95765c2c81342de8a8df.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tx timer implementation is flawed. Despite the controller
attempting to time the guest visable assertion of the TX-empty status
bit (and corresponding interrupt) the controller is still transmitting
characters instantaneously. There is also no sense of multiple character
delay.
The only side effect of this timer is assertion of tx-empty status. So
just remove the timer completely and hold tx-empty as permanently
asserted (its reset status). This matches the actual behaviour of
instantaneous transmission.
While we are VMSD version bumping, add the tx_fifo as device state to
prepare for upcomming TxFIFO flow control. Implement the interrupt
generation logic for the TxFIFO occupancy.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7a208a7eb8d79d6429fe28b1396c3104371807b2.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When setting rounding modes we currently just hardcode the numeric values
for rounding modes in a big switch statement.
With AArch64 support coming, we will need to refer to these rounding modes
at different places throughout the code though, so let's better give them
names so we don't get confused by accident.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, use names from ARM ARM.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the fmov instruction working on scalars
with an immediate payload.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebase and use new infrastructure.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Floating-point data-processing (3 source)"
group of instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches.
Implement using muladd as suggested by Richard Henderson.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: pull field decode up a level, use register accessors]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Floating-point data-processing (2 source)"
group of instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merge single and double precision patches. Rebase
and update to new infrastructure. Incorporate FMIN/FMAX support patch by
Michael Matz.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM:
* added convenience accessors for FP s and d regs
* pulled the field decode and opcode validity check up a level]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Use the VFP_BINOP macro to provide helpers for min, max, minnum
and maxnum, rather than hand-rolling them. (The float64 max
version is not used by A32 but will be needed for A64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The A64 128 bit vector registers are stored as a pair of
uint64_t values in the register array. This means that if
we're directly loading or storing a value of size less than
64 bits we must adjust the offset appropriately to account
for whether the host is bigendian or not. Provide utility
functions to abstract away the offsetof() calculations for
the FP registers.
For do_fp_st() we can sidestep most of the issues for 64 bit
and smaller reg-to-mem transfers by always doing a 64 bit
load from the register and writing just the piece we need
to memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When dumping the current CPU state, we can also get a request
to dump the FPU state along with the CPU's integer state.
Add support to dump the VFP state when that flag is set, so that
we can properly debug code that modifies floating point registers.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased. Output all registers, two per-line.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add a config for aarch64-linux-user, thereby enabling it as
a valid target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Now the AArch64 targets are in mainline we can include them in our
Travis test matrix.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the helpers provided for getting the correct FPSR and FPCR
values for the signal context.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The AArch64 linux-user support was written before but merged after
commit 4ce6243dc6 which cleaned up the handling of the clone()
syscall argument order, so we failed to notice that AArch64 also needs
TARGET_CLONE_BACKWARDS to be defined. Add this define so that clone
and fork syscalls work correctly.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This implement exclusive loads/stores for aarch64 along the lines of
arm32 and ppc implementations. The exclusive load remembers the address
and loaded value. The exclusive store throws an an exception which uses
those values to check for equality in a proper exclusive region.
This is not actually the architecture mandated semantics (for either
AArch32 or AArch64) but it is close enough for typical guest code
sequences to work correctly, and saves us from having to monitor all
guest stores. It's fairly easy to come up with test cases where we
don't behave like hardware - we don't for example model cache line
behaviour. However in the common patterns this works, and the existing
32 bit ARM exclusive access implementation has the same limitations.
AArch64 also implements new acquire/release loads/stores (which may be
either exclusive or non-exclusive). These imposes extra ordering
constraints on memory operations (ie they act as if they have an implicit
barrier built into them). As TCG is single-threaded all our barriers
are no-ops, so these just behave like normal loads and stores.
Signed-off-by: Michael Matz <matz@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.
The changes in semantics for the variables are:
exclusive_addr -> extended to 64 bits; -1ULL for "monitor lost",
otherwise always < 2^32 for AArch32
exclusive_val -> extended to 64 bits. 64 bit exclusives in AArch32 now
use the high half of exclusive_val instead of a separate exclusive_high
exclusive_high -> is no longer used in AArch32; extended to 64 bits as
it will be needed for AArch64's pair-of-64-bit-values exclusives.
exclusive_test -> extended to 64 bits, as it is an address. Since this is
a linux-user-only field, in arm-linux-user it will always have the top
32 bits zero.
exclusive_info -> stays 32 bits, as it is neither data nor address, but
simply holds register indexes etc. AArch64 will be able to fit all its
information into 32 bits as well.
Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The common pattern for system registers in a 64-bit capable ARM
CPU is that when in AArch32 the cp15 register is a view of the
bottom 32 bits of the 64-bit AArch64 system register; writes in
AArch32 leave the top half unchanged. The most natural way to
model this is to have the state field in the CPU struct be a
64 bit value, and simply have the AArch32 TCG code operate on
a pointer to its lower half.
For aarch64-linux-user the only registers we need to share like
this are the thread-local-storage ones. Widen their fields to
64 bits and provide the 64 bit reginfo struct to make them
visible in AArch64 state. Note that minor cleanup of the AArch64
system register encoding space means We can share the TPIDR_EL1
reginfo but need split encodings for TPIDR_EL0 and TPIDRRO_EL0.
Since we're touching almost every line in QEMU that uses the
c13_tls* fields in this patch anyway, we take the opportunity
to rename them in line with the standard ARM architectural names
for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The common pattern for system registers in a 64-bit capable ARM
CPU is that when in AArch32 the cp15 register is a view of the
bottom 32 bits of the 64-bit AArch64 system register; writes in
AArch32 leave the top half unchanged. The most natural way to
model this is to have the state field in the CPU struct be a
64 bit value, and simply have the AArch32 TCG code operate on
a pointer to its lower half.
For aarch64-linux-user the only registers we need to share like
this are the thread-local-storage ones. Widen their fields to
64 bits and provide the 64 bit reginfo struct to make them
visible in AArch64 state. Note that minor cleanup of the AArch64
system register encoding space means We can share the TPIDR_EL1
reginfo but need split encodings for TPIDR_EL0 and TPIDRRO_EL0.
Since we're touching almost every line in QEMU that uses the
c13_tls* fields in this patch anyway, we take the opportunity
to rename them in line with the standard ARM architectural names
for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement an initial minimal set of EL0-visible system registers:
* NZCV
* FPCR
* FPSR
* CTR_EL0
* DCZID_EL0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The AArch64 equivalent of the traditional AArch32
cp15 coprocessor registers is the set of instructions
MRS/MSR/SYS/SYSL, which cover between them both true
system registers and the "operations with side effects"
such as cache maintenance which in AArch32 are mixed
in with other cp15 registers. Implement these instructions
to look in the cpregs hashtable for the register or
operation.
Since we don't yet populate the cpregs hashtable with
any registers with the "AA64" bit set, everything will
still UNDEF at this point.
MSR/MRS is the first user of is_jmp = DISAS_UPDATE, so
fix an infelicity in its handling where the main loop
was requiring the caller to do the update of PC rather
than just doing it itself.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The cpregs APIs used by the decoder (get_arm_cp_reginfo() and
cp_access_ok()) currently take either a CPUARMState* or an ARMCPU*.
This is problematic for the A64 decoder, which doesn't pass the
environment pointer around everywhere the way the 32 bit decoder
does. Adjust the parameters these functions take so that we can
copy only the relevant info from the CPUARMState into the
DisasContext and then use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preference to the older helpers. Stores only in this patch.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In preference to the older helpers. Loads only in this patch.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Now that we don't combine mem_index with operand size info,
we don't need to encode it. Which tidies many places that
access it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rather than add s->mem_index into a combined size+mem_index
argument, pass the context down. This will allow cleaning
up s->mem_index later.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The previous placement could result in duplicate logging while
still processing interrupts.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If a user or QMP client enter a bad syntax for the migrate
command in QMP/HMP, then the migrate command will never succeed
from that point on.
For example, if you enter:
(qemu) migrate tcp;0:4444
migrate: Parameter 'uri' expects a valid migration protocol
Then the migrate command will always fail from now on:
(qemu) migrate tcp:0:4444
migrate: There's a migration process in progress
The problem is that qmp_migrate() sets the migration status to
MIG_STATE_SETUP and doesn't reset it on syntax error. This bug
was introduced by commit 29ae8a4133.
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Replace assert_no_error() usages with the error_abort system.
&error_abort is passed into API calls to signal to the Error sub-system
that any errors are fatal. Removes need for caller assertions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add a special Error * that can be passed to error handling APIs to
signal that any errors are fatal and should abort QEMU. There are two
advantages to this:
- allows for brevity when wishing to assert success of Error **
accepting APIs. No need for this pattern:
Error * local_err = NULL;
api_call(foo, bar, &local_err);
assert_no_error(local_err);
This also removes the need for _nofail variants of APIs with
asserting call sites now reduced to 1LOC.
- SIGABRT happens from within the offending API. When a fatal error
occurs in an API call (when the caller is asserting sucess) failure
often means the API itself is broken. With the abort happening in the
API call now, the stack frames into the call are available at debug
time. In the assert_no_error scheme the abort happens after the fact.
The exact semantic is that when an error is raised, if the argument
Error ** matches &error_abort, then the abort occurs immediately. The
error messaged is reported.
For error_propagate, if the destination error is &error_abort, then
the abort happens at propagation time.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add two commands that are the monitor counterparts of -object. The commands
have the same Visitor-based implementation, but use different kinds of
visitors so that the HMP command has a DWIM string-based syntax, while
the QMP variant accepts a stricter JSON-based properties dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The file descriptor is never initialized to -1, which makes rng-random
close stdin if an object is created and immediately destroyed. If we
change it to -1, we also need to protect qemu_set_fd_handler from
receiving a bogus file descriptor.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Update the generic cpreg support code to also handle AArch64:
AArch64-visible registers coexist in the same hash table with
AArch32-visible ones, with a bit in the hash key distinguishing
them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
define_one_arm_cp_reg_with_opaque() has a set of nested loops which
insert a cpreg entry into the hashtable for each of the possible
opc/crn/crm values allowed by wildcard specifications. We're about
to add an extra loop to this nesting, so pull the core of the loop
(which adds a single entry to the hashtable) out into its own
function for clarity.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
cgcc reported a duplicate initialisation. Mainstone includes a matrix
keyboard where two different positions map to 'space'.
QEMU uses the reversed mapping and does not map 'space' to two different
matrix positions.
Some other keys are either missing or might be mapped wrongly (cf. Linux
kernel code). Don't fix these until someone can test them with real
hardware, but add TODO comments.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mapping is a hardware feature, so it is relatively constant.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The row and column values use only a very limited range (-1 ... 7),
so a byte value is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It is possible to pre-define a character device with the -chardev option
and reference its id as serial device. The man page does not mention this
feature.
Use case: Use stdio as serial, but do not terminate VM on Ctrl-C
-chardev stdio,id=mystdio,signal=off -serial chardev:mystdio
Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The help message uses $python and displays its value, so that macro
should be tested and set early.
With this modification, configure --help displays the correct value
(usually python -B) and no longer creates several *.pyc files.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the new form most lines of the code now look like the final output:
there is no leading echo command and the lines are shorter.
The resulting output is nearly identical: the only difference is a blank
character which was deliberately removed:
@@ -8,7 +8,7 @@
--interp-prefix=PREFIX where to find shared libraries, etc.
use %M for cpu name [/usr/gnemul/qemu-%M]
--target-list=LIST set target list (default: build everything)
- Available targets: alpha-softmmu arm-softmmu
+ Available targets: alpha-softmmu arm-softmmu
cris-softmmu i386-softmmu lm32-softmmu m68k-softmmu
microblaze-softmmu microblazeel-softmmu mips-softmmu
mips64-softmmu mips64el-softmmu mipsel-softmmu
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix off-by-one error (noticed by Andrea Arcangeli).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Once upon a time, the error message was:
qemu: -device nonexistant: Device "nonexistant" not found. Try -device '?' for a list.
But progress marches on, and conversion to QError (commit 0204276)
changed it into:
Invalid parameter 'driver'
Try with argument '?' for a list.
Progress didn't stop there, of course. After a couple of iterations,
we arrived at the current message (commit 6acbe4c):
qemu: -device nonexistant: Parameter 'driver' expects device type
Mission accomplished: this is complete mush.
We've since abandoned our quest for "rich" error objects, fortunately
before it turned all error messages into mush. Time to undo the
damage to this one. Make it:
qemu: -device nonexistant: nonexistant is not a valid device model name
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Convert 'init' function to QOM's 'realize' for ioapic and kvm-ioapic.
Change variable 'ioapic_no' from static to global. Then we can drop
the 'instance_no' function argument.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some cleanups:
* ioapic_common.c: Rename 'register_types' to 'ioapic_common_register_types'
* Replace inline 'DEVICE(s)' with local 'DeviceState *dev' variable
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Convert 'init' function to QOM's 'realize' for apic, kvm/apic and
xen/xen_apic.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Do some cleanup, including:
1. Remove DO_UPCAST() for APICCommonState
2. Change DeviceState pointers from 'd' to 'dev', better to understand
3. Rename 'register_types' to specifically 'apic_common_register_types'
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Same reasoning as commit 02a5c4c974
("qdev: Drop misleading qdev_free() function"). The qbus_free()
function removes the child from the namespace and decrements the
reference count. It does not, however, guarantee to free the child
since the refcount may still be held.
Just call object_unparent() directly.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We should not modify the type hash table while it is being iterated on.
Assert that it does not happen.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add basic regression testing for QOM Interface usage.
Test checks casting to interface type/class for following cases:
- interface implementation in leaf class
- interface implementation in intermediate (parent) class
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There should be no need to look up nor enumerate the interface "types",
whose "classes" are really just vtables. Just create the types and
add them to the interface list of the parent type.
Interfaces not registering their type anymore means that accessing
superclass::interface by type name will fail when initializing
subclass::interface. Thus, we need to pre-initialize the subclass's
parent_type field before calling type_initialize. Apart from this, the
interface "types" should never be used and thus it is harmless to leave
them out of the hashtable.
Further, the interface types had a bug with interfaces that are
inherited from a superclass: The implementation type name was wrong
(for example it was subclass::superclass::interface rather than
just subclass::interface). This patch fixes this as well.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The object-cast and class-cast caches cannot be shared because class
caching is conditional on the target type not being an interface and
object caching is unconditional. Leads to a bug when a class cast
to an interface follows an object cast to the same interface type:
FooObject = FOO(obj);
FooClass = FOO_GET_CLASS(obj);
Where TYPE_FOO is an interface. The first (object) cast will be
successful and cache the casting result (i.e. TYPE_FOO will be cached).
The second (class) cast will then check the shared cast cache
and register a hit. The issue is, when a class cast hits in the cache
it just returns a pointer cast of the input class (i.e. the concrete
class).
When casting to an interface, the cast itself must return the
interface class, not the concrete class. The implementation of class
cast caching already ensures that the returned cast result is only
a pointer cast before caching. The object cast logic however does
not have this check.
Resolve by just splitting the object and class caches.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Nathan Rossi <nathan.rossi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Ask users of DEFINE_PROP_PTR() to set
cannot_instantiate_with_device_add_yet, or explain why it's not
needed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Pointer properties can be set only by code, not by device_add. A
device with a pointer property can work with device_add only when the
property may remain null.
This is the case for property "interrupt_vector" of device
"etraxfs,pic". Add a comment there.
Set cannot_instantiate_with_device_add_yet for the other devices with
pointer properties, with a comment explaining why.
Juha Riihimäki and Peter Maydell deserve my thanks for making "pointer
property must not remain null" blatantly obvious in the OMAP devices.
Only device "smbus-eeprom" is actually changed. The others are all
sysbus devices, which get cannot_instantiate_with_device_add_yet set
in their abstract base's class init function. Setting it again in
their class init function is technically redundant, but serves as
insurance for when sysbus devices become available with device_add,
and as documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for ETRAX)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Watch this:
$ upstream-qemu -nodefaults -S -display none -monitor stdio
QEMU 1.7.50 monitor - type 'help' for more information
(qemu) device_add rng-egd
/work/armbru/qemu/qdev-monitor.c:491:qdev_device_add: Object 0x2089b00 is not an instance of type device
Aborted (core dumped)
Crashes because "rng-egd" exists, but isn't a subtype of TYPE_DEVICE.
Broken in commit 18b6dad.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Features family, model, stepping, level, hv_spinlocks are treated similarly
when passed from command line, so it's not necessary to handle each of them
individually. Collapse them to one catch-all branch which will treat
any not explicitly handled feature in format 'foo=val'.
Any unknown feature will be rejected by property setter so there is no
need to check for unknown feature in cpu_x86_parse_featurestr(), therefore
it's replaced by above mentioned catch-all handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Features check, enforce, hv_relaxed and hv_vapic are treated as boolean
set to 'on' when passed from command line, so it's not necessary to
handle each of them separately. Collapse them to one catch-all branch
which will treat any feature in format 'foo' as boolean set to 'on'.
Any unknown feature will be rejected by CPU property setter so there is no
need to check for unknown feature in cpu_x86_parse_featurestr(), therefore
it's replaced by above mentioned catch-all handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* Additionally convert check_cpuid & enforce_cpuid to bool and make them
members of X86CPU
* Make 'enforce' feature independent from 'check'
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace growing numbers of inline x86_env_get_cpu() with x86_cpu variable.
Reviewed-by: Chen Fan <chen.fan@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Implement FMOV, ie non-converting moves between general purpose
registers and floating point registers. This is a subtype of
the floating point <-> integer instruction class.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add a top level decoder skeleton for FP instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add decoding for the exception generating instructions, and implement
SVC (syscalls) and BRK (software breakpoint).
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Data-processing (3 source)"
family of instructions, namely MADD, MSUB, SMADDL, SMSUBL, SMULH,
UMADDL, UMSUBL, UMULH.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the non-carry forms of addition and subtraction
(immediate, extended register and shifted register).
This includes the code to calculate NZCV if the instruction
calls for setting the flags.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the pre/post-index ld/st forms with immediate
offsets as well as the un-scaled immediate form (which are all
variations on the same 9-bit immediate instruction form).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch support the basic load and store pair instructions and
includes the generic helper functions:
* do_gpr_st()
* do_fp_st()
* do_gpr_ld()
* do_fp_ld()
* read_cpu_reg_sp()
* gen_check_sp_alignment()
The last function gen_check_sp_alignment() is a NULL op currently but
put in place to make it easy to add SP alignment checking later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
commit 5ce4f35781
"target-arm: A64: add set_pc cpu method"
introduces an array aarch64_cpus which is zero
size if this code is built without CONFIG_USER_ONLY.
In particular an attempt to iterate over this array produces a warning
under gcc 4.8.2:
CC aarch64-softmmu/target-arm/cpu64.o
/scm/qemu/target-arm/cpu64.c: In function ‘aarch64_cpu_register_types’:
/scm/qemu/target-arm/cpu64.c:124:5: error: comparison of unsigned
expression < 0 is always false [-Werror=type-limits]
for (i = 0; i < ARRAY_SIZE(aarch64_cpus); i++) {
^
cc1: all warnings being treated as errors
This is the result of ARRAY_SIZE being an unsigned type,
causing "i" to be promoted to unsigned int as well.
As zero size arrays are a gcc extension, it seems
cleanest to add a dummy element with NULL name,
and test for it during registration.
We'll be able to drop this when we add more CPUs.
Cc: Alexander Graf <agraf@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Make the 32bit pci hole start at end of ram, so all possible address
space is covered.
We used to try and make addresses aligned so they are easier to cover
with MTRRs, but since they are cosmetic on KVM, this is probably not
worth worrying about.
Of course the firmware can use less than that. Leaving space unused is
no problem, mapping pci bars outside the hole causes problems though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Don't duplicate the array length computation in the memset()
when plain sizeof() can produce the correct results.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The size of tlb_table is 4k on a 64-bit host. For overwriting
memory at this size, cacheline tricks can help.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 6ef4716 cleaned up parsing of -boot option argument, but
accidentally dropped parameter strict. It should have been updated
exactly like parameter menu. Do that.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When we're running in non-64bit mode with qemu-system-x86_64 we can
still end up with virtual addresses that are above the 32bit boundary
if a segment offset is set up.
GNU Hurd does exactly that. It sets the segment offset to 0x80000000 and
puts its EIP value to 0x8xxxxxxx to access low memory.
This doesn't hit us when we enable paging, as there we just mask away the
unused bits. But with real mode, we assume that vaddr == paddr which is
wrong in this case. Real hardware wraps the virtual address around at the
32bit boundary. So let's do the same.
This fixes booting GNU Hurd in qemu-system-x86_64 for me.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
I also removed two hyphens in the same comment.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Post-order is the only sensible direction for the reset signals.
For example, suppose pre-order is used and the parent has some data
structures that cache children state (for example a list of active
requests). When the reset method is invoked on the parent, these caches
could be in any state.
If post-order is used, on the other hand, these will be in a known state
when the reset method is invoked on the parent.
This change means that it is no longer possible to block the visit of
the devices, so the callback is changed to return void. This is not
a problem, because PCI was returning 1 exactly in order to achieve the
same ordering that this patch implements.
PCI can then rely on the qdev core having sent a "reset signal" (whatever
that means) to the device, and only do the PCI-specific initialization
with pci_do_device_reset.
MST: fixed up virtio-ccw
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Resetting should be done in post-order, not pre-order. However,
qdev_walk_children and qbus_walk_children do not allow this. Fix
it by adding two extra arguments to the functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_device_reset will deassert the INTX pins, and this will make the
irq_count array all-zeroes. Check that this is the case, and remove
the existing loop which might even unsync irq_count and irq_state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qbus_reset_all can be used instead. There is no semantic change
because pcibus_reset returns 1 and takes care of the device
tree traversal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix bogus CPU hotplug GPE handler.
Make Q35 CPU hotplug GPE handler match PIIX4 one, since
CPU hotplug event is triggered by GPE0.2 register.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it fixes IRQ storm since guest isn't able to lower SCI IRQ
after it has been handled when it clears GPE event.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... and rename it into acpi_update_sci() since it changes
SCI on only on PM registers status.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hardcoded GPE0 mask isn't really needed. Since GPE0_STS initialized
with all bits cleared and only QEMU itself can set bits there (i.e.
guest can only clear bits in it). So guest can't triger SCI
by setting _STS & _EN bits and there is not reason to mask out not
supported _STS bits since they shouldn't be set by QEMU in the first
place.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check whether the firmware is not hidden by other memory regions.
Qemu is started in paused mode: it shouldn't try to interpret generated
garbage.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The blob is 64K in size and contains 0x00..0xFF repeatedly.
The client code added to main() wouldn't make much sense in the long term.
It helps with debugging and it silences gcc about create_blob_file() being
unused, and we'll replace it in the next patch anyway.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current two GTest cases, /i440fx/defaults and /i440fx/pam can share a
qemu process, but the next two cases will need dedicated instances. It is
messy (and order-dependent) to dynamically configure GTest cases one by
one to start, stop, or keep the current qtest (*); let's just have each
GTest work with its own qtest. The performance difference should be
negligible.
(*) As g_test_run() can be invoked at most once per process startup, and
it runs GTest cases in sequence, we'd need clumsy data structures to
control each GTest case to start/stop/keep the qemu instance. Or, we'd
have to code the same information into the test methods themselves, which
would make them even more order-dependent.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similarly to commit 1d9358e6
("libqtest: New qtest_end() to go with qtest_start()").
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch allows the user to usefully specify
-drive file=img_1,if=pflash,format=raw,readonly \
-drive file=img_2,if=pflash,format=raw
on the command line. The flash images will be mapped under 4G in their
reverse unit order -- that is, with their base addresses progressing
downwards, in increasing unit order.
(The unit number increases with command line order if not explicitly
specified.)
This accommodates the following use case: suppose that OVMF is split in
two parts, a writeable host file for non-volatile variable storage, and a
read-only part for bootstrap and decompressible executable code.
The binary code part would be read-only, centrally managed on the host
system, and passed in as unit 0. The variable store would be writeable,
VM-specific, and passed in as unit 1.
00000000ffe00000-00000000ffe1ffff (prio 0, R-): system.flash1
00000000ffe20000-00000000ffffffff (prio 0, R-): system.flash0
(If the guest tries to write to the flash range that is backed by the
read-only drive, pflash_update() is never called; various flash
programming/erase errors are returned to the guest instead. See the
callers of pflash_update(), and the initialization of "pfl->ro", in
"hw/block/pflash_cfi01.c".)
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Map 3G (i440fx) of memory below 4G, so the RAM pieces
are nicely aligned to gigabyte borders.
Keep old memory layout for (a) old machine types and (b) in case all
memory fits below 4G and thus we don't have to split RAM into pieces
in the first place. The later makes sure this change doesn't take
away memory from 32bit guests.
So, with i440fx and up to 3.5 GB of memory, all of it will be mapped
below 4G. With more than 3.5 GB of memory 3 GB will be mapped below
4G and the remaining amount will be mapped above 4G.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Such devices have always been unavailable and omitted from the list of
available devices shown by device_add help. Until commit 18b6dad
silently broke the former, setting up nasty traps for unwary users,
like this one:
$ qemu-system-x86_64 -nodefaults -monitor stdio -display none
QEMU 1.6.50 monitor - type 'help' for more information
(qemu) device_add apic
Segmentation fault (core dumped)
I call that a regression. Fix it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Drop it when there's no obvious reason why device_add could not work.
Else keep and document why.
* isa-fdc: drop
* i8042: drop, even though its I/O base is hardcoded (because you
could conceivably still add one to a board that has none), and even
though PC board code wires up the A20 line (because that wiring is
optional)
* port92: keep because it needs additional wiring by port92_init()
* mc146818rtc: keep because it needs to be wired up by rtc_init()
* m48t59_isa: keep because needs to be wired up by m48t59_init_isa()
* isa-pit, kvm-pit: keep (in their abstract base pic-common) because
the PIT needs additional wiring by board code, depending on HPET
presence
* pcspk: keep because of pointer property pit, and because realize
sets global pcspk_state
* vmmouse: keep because of pointer property ps2_mouse
* vmport: keep because realize sets global port_state
* isa-i8259, kvm-i8259: keep (in their abstract base pic-common),
because the PICs' IRQ input lines are set up by board code, and the
wiring of the slave to the master is hard-coded in device model code
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A VT82C686B southbridge has multiple functions. We model each
function as a separate qdev. One of them need some special wiring set
up in mips_fulong2e_init() to work: the ISA bridge at 05.0.
The IDE controller at 05.1 (via-ide) has always had
cannot_instantiate_with_device_add_yet set, but there is no obvious
reason why device_add could not work for them. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A PIIX3/PIIX4 southbridge has multiple functions. We model each
function as a separate qdev. Two of them need some special wiring set
up in pc_init1() or mips_malta_init() to work: the ISA bridge at 01.0,
and the SMBus controller at 01.3.
The IDE controller at 01.1 (piix3-ide, piix3-ide-xen, piix4-ide) has
always had cannot_instantiate_with_device_add_yet set, but there is no
obvious reason why device_add could not work for them. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
An ICH9 southbridge contains several PCI devices, some of them with
multiple functions. We model each function as a separate qdev. Two
of them need some special wiring set up in pc_q35_init() to work: the
LPC controller at 00:1f.0, and the SMBus controller at 00:1f.3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Many PCI host bridges consist of a sysbus device and a PCI device.
You need both for the thing to work. Arguably, these bridges should
be modelled as a single, composite devices instead of pairs of
seemingly independent devices you can only use together, but we're not
there, yet.
Since the sysbus part can't be instantiated with device_add, yet,
permitting it with the PCI part is useless. We shouldn't offer
useless options to the user, so let's set
cannot_instantiate_with_device_add_yet for them.
It's already set for Bonito, Grackle, i440FX and Raven. Document why.
Set it for the others: dec-21154, e500-host-bridge, gt64120_pci, mch,
pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp,
uni-north-internal-pci, uni-north-pci, and versatile_pci_host.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
device_add plugs devices into suitable bus. For "real" buses, that
actually connects the device. For sysbus, the connections need to be
made separately, and device_add can't do that. The device would be
left unconnected, and could not possibly work.
Quite a few, but not all sysbus devices already set
cannot_instantiate_with_device_add_yet in their class init function.
Set it in their abstract base's class init function
sysbus_device_class_init(), and remove the now redundant assignments
from device class init functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In an ideal world, machines can be built by wiring devices together
with configuration, not code. Unfortunately, that's not the world we
live in right now. We still have quite a few devices that need to be
wired up by code. If you try to device_add such a device, it'll fail
in sometimes mysterious ways. If you're lucky, you get an
unmysterious immediate crash.
To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad. The device model is still omitted from
help, but is available anyway.
Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.
This commit clarifies no_user's purpose. Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy. While there, make it
bool.
Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale. The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.
With that done, the regression fix is hopefully acceptable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The recent VSX patches broken compilation of QEMU when configurated
with --enable-debug, as it was treating "target long" TCG variables
as "i64" which is not true for 32bit targets.
This patch fixes all the places that the compiler has found to use
the correct variable type and if necessary manually cast.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Linux prefers WRITE SAME to UNMAP if the limits are zero, and WRITE
SAME does not discard anything unless the device can guarantee that
the resulting block is zero.
Setting the maximum unmap block and descriptor counts to non-zero
makes Linux choose UNMAP and fixes thin provisioning on glusterfs.
While the maximum unmap block count can have some effect on performance,
the (suggested) maximum number of descriptors is not particularly
important so I didn't add a customization option. SCSI drivers are
used to online firmware updates so I'm not yet adding versioning support
for SCSI, but we're probably getting close to the point when it's worth
thinking about it.
Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Patch queue for s390 - 2013-12-18
This covers mostly minor bug fixes and implements the SIGP START
hypercall which allows to start a remote CPU without changing its
state.
Cornelia Huck (1):
s390x/kvm: Fix diagnose handling.
Thomas Huth (7):
s390x/kvm: Removed duplicated SIGP defines
s390x/kvm: Removed s390_store_status stub
s390x/kvm: Fix coding style in handle_sigp()
s390x/kvm: Implemented SIGP START
s390x/kvm: Simplified the calculation of the SIGP order code
s390x/kvm: Fixed condition code for unknown SIGP orders
s390x/ioinst: CHSC has to set a condition code
* tag 'signed-s390-for-upstream' of git://github.com/agraf/qemu:
s390x/ioinst: CHSC has to set a condition code
s390x/kvm: Fixed condition code for unknown SIGP orders
s390x/kvm: Simplified the calculation of the SIGP order code
s390x/kvm: Implemented SIGP START
s390x/kvm: Fix coding style in handle_sigp()
s390x/kvm: Removed s390_store_status stub
s390x/kvm: Removed duplicated SIGP defines
s390x/kvm: Fix diagnose handling.
The comments apply to 8-bit stores, not 8-byte stores.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We support top == active for commit now, remove the check and add an
assertion here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Factor out commit test common logic into super class, and update test
of committing the active image.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If active is top, it will be mirrored to base, (with block/mirror.c
code), then the image is switched when user completes the block job.
QMP documentation is updated.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit_active_start is implemented in block/mirror.c, It will create a
job with "commit" type and designated base in block-commit command. This
will be used for committing active layer of device.
Sync mode is removed from MirrorBlockJob because there's no proper type
for commit. The used information is is_none_mode.
The common part of mirror_start and commit_active_start is moved to
mirror_start_job().
Fix the comment wording for commit_start.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows setting the base before entering mirror_run, commit will
make use of it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Let reference count manage target and don't call bdrv_close here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 75884afd5c ("virtio-blk: Convert to
QOM realize") dropped a duplicate error_report() call. Now we no longer
get the following error message twice:
QEMU_PROG: -drive if=virtio: Device initialization failed.
Update qemu-iotests 051.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This improves vmdk_create to use bdrv_* functions to replace qemu_open
and other fd functions. The error handling are improved as well. One
difference is that bdrv_pwrite will round up buffer to sectors, so for
description file, an extra bdrv_truncate is used in the end to drop
inding zeros.
Notes:
- A bonus bug fix is correct endian is used in initializing GD entries.
- ROUND_UP and DIV_ROUND_UP are used where possible.
I tested that new code produces exactly the same file as previously.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMFS extent line in description file should be with 4 fields:
RW <size> VMFS "file-name.vmdk"
Check the number explicitly and report error if offset is appended as
FLAT, which should be invalid format.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The man page for qemu-img, and the qemu-doc, did not mention VHDX
as a supported format. This adds in reference to VHDX in those
documents.
[Stefan Weil <sw@weilnetz.de> suggested s/Block Size/Block size/ for
consistency. I have made this change.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If there is a dirty log file to be replayed in a VHDX image, it is
replayed in .vhdx_open(). However, if the file is opened read-only,
then a somewhat cryptic error message results.
This adds a more helpful error message for the user. If an image file
contains a log to be replayed, and is opened read-only, the user is
instructed to run 'qemu-img check -r all' on the image file.
Running qemu-img check -r all will cause the image file to be opened
r/w, which will replay the log file. If a log file replay is detected,
this is flagged, and bdrv_check will increase the corruptions_fixed
count for the image.
[Fixed typo in error message that was pointed out by Eric Blake
<eblake@redhat.com>.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Function iscsi_read10_task got additional parameters starting with version
libiscsi 1.5.0.
libiscsi 1.4.0 is still widely used (Debian wheezy, jessie and other Linux
distributions currently provide packages for QEMU which use it), so we
still need support for this older API.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We are moving boldly on to QEMU 2.0 in the next release. Some patches
written at a time where we assumed 1.8 would be the next version number
managed to sneak in.
s/1.8/2.0/ in qapi-schema.json
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When running qcow2 over sheepdog, we might meet following problem
qemu-system-x86_64: shrinking is not supported
And cause IO errors to Guest. This is because we abuse bs->total_sectors, which
is manipulated by generic block layer and race with sheepdog code.
We should directly check if offset > vdi_size to dynamically enlarge the volume
instead of 'offset > bs->total_sectors', which will cause problem when following
case happens:
vdi_size > offset > bs->total_sectors
# then trigger sd_truncate() to shrink the volume wrongly.
Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reported-by: Hadrien KOHL <hadrien.kohl@gmail.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Patch queue for ppc - 2013-12-20
Alexander Graf (3):
PPC: Use default pci bus name for grackle and heathrow
roms: Flush icache when writing roms to guest memory
PPC: Add VSX to hflags
Alexey Kardashevskiy (5):
powerpc: add PVR mask support
target-ppc: move POWER7+ to a separate family
spapr-rtas: replace return code constants with macros
spapr-rtas: add ibm, (get|set)-system-parameter
spapr: make sure RMA is in first mode of first memory node
Greg Kurz (1):
target-ppc: add stubs for KVM breakpoints
Paolo Bonzini (1):
spapr: tie spapr-nvram to -pflash
Paul Mackerras (1):
spapr: limit numa memory regions by ram size
Peter Crosthwaite (2):
device_tree: s/qemu_devtree/qemu_fdt globally
device_tree: qemu_fdt_setprop: Rename val_array arg
Tom Musta (19):
Declare and Enable VSX
Add MSR VSX and Associated Exception
Add VSX Instruction Decoders
Add VSR to Global Registers
Add lxvd2x
Add stxvd2x
Add xxpermdi
Add lxsdx
Add lxvdsx
Add lxvw4x
Add stxsdx
Add stxvw4x
Add VSX Scalar Move Instructions
Add VSX Vector Move Instructions
Add Power7 VSX Logical Instructions
Add xxmrgh/xxmrgl
Add xxsel
Add xxspltw
Add xxsldwi
* agraf/tags/signed-ppc-for-upstream: (32 commits)
spapr: limit numa memory regions by ram size
spapr: make sure RMA is in first mode of first memory node
device_tree: qemu_fdt_setprop: Rename val_array arg
device_tree: s/qemu_devtree/qemu_fdt globally
PPC: Add VSX to hflags
Add xxsldwi
Add xxspltw
Add xxsel
Add xxmrgh/xxmrgl
Add Power7 VSX Logical Instructions
Add VSX Vector Move Instructions
Add VSX Scalar Move Instructions
roms: Flush icache when writing roms to guest memory
spapr: tie spapr-nvram to -pflash
PPC: Use default pci bus name for grackle and heathrow
spapr-rtas: add ibm, (get|set)-system-parameter
spapr-rtas: replace return code constants with macros
target-ppc: move POWER7+ to a separate family
Add stxvw4x
Add stxsdx
...
This makes sure that all NUMA memory blocks reside within RAM or
have zero length.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The SPAPR specification says that the RMA starts at the LPAR's logical
address 0 and is the first logical memory block reported in
the LPAR’s device tree.
So SLOF only maps the first block and that block needs to span
the full RMA.
This makes sure that the RMA area is where SLOF expects it.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Looking at the implementation, this doesn't really have a lot to do
with arrays. Its just a pointer to a buffer and is passed through
to the wrapped fn (qemu_fdt_setprop) unchanged. So rename to make it
consistent with libfdt, which in the wrapped function just calls it
"val".
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The qemu_devtree API is a wrapper around the fdt_ set of APIs.
Rename accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[agraf: also convert hw/arm/virt.c]
Signed-off-by: Alexander Graf <agraf@suse.de>
We generate different code depending on whether MSR_VSX is set or
clear, so it needs to be part of our hflags too which indicate whether
we're still in the same translation block cache bucket.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Shift Left Double by Word Immediate
(xxsldwi) instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Splat Word (xxsplatw) instruction.
This is the first instruction to use the UIM immediate field
and consequently a decoder is also added.
V2: reworked implementation per Richard Henderson's comments.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Select (xxsel) instruction.
The xxsel instruction has four VSR operands. Thus the xC
instruction decoder is added.
The xxsel instruction is massively overloaded in the opcode
table since only bits 26 and 27 are opcode bits. This
overloading is done in matrix fashion with two macros
(GEN_XXSEL_ROW and GEN_XX_SEL).
V2: (1) eliminated unecessary XXSEL macro (2) tighter implementation
using tcg_gen_andc_i64.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Merge High Word and VSX Merge Low Word
instructions.
V2: Now implemented using deposit (per Richard Henderson's comment)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX logical instructions that are defined
by the Version 2.06 Power ISA (aka Power7):
- xxland
- xxlandc
- xxlor
- xxlxor
- xxlnor
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX scalar move instructions:
- xsabsdp (Scalar Absolute Value Double-Precision)
- xsnabspd (Scalar Negative Absolute Value Double-Precision)
- xsnegdp (Scalar Negate Double-Precision)
- xscpsgndp (Scalar Copy Sign Double-Precision)
A common generator macro (VSX_SCALAR_MOVE) is added since these
instructions vary only slightly from each other.
Macros to support VSX XX2 and XX3 form opcodes are also added.
These macros handle the overloading of "opcode 2" space (instruction
bits 26:30) caused by AX and BX bits (29 and 30, respectively).
V3: Per feedback from Paolo Bonzini, moved the sign mask into a
temporary and used andc.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We use the rom infrastructure to write firmware and/or initial kernel
blobs into guest address space. So we're basically emulating the cache
off phase on very early system bootup.
That phase is usually responsible for clearing the instruction cache for
anything it writes into cachable memory, to ensure that after reboot we
don't happen to execute stale bits from the instruction cache.
So we need to invalidate the icache every time we write a rom into guest
address space. We do not need to do this for every DMA since the guest
expects it has to flush the icache manually in that case.
This fixes random reboot issues on e5500 (booke ppc) for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
spapr-nvram's drive property is currently connected to a non-existent
"-machine nvram=<drivename>" option. Instead, tie it to -pflash like
other non-volatile RAM devices. This provides the following possibilities
for adding a backend for the sPAPR non-volatile RAM:
* -pflash filename
* -drive if=pflash,file=filename,format=raw,...
* -drive if=none,file=filename,format=raw,id=foo,... -global spapr-nvram.drive=foo
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
There's no good reason to call our bus "pci" rather than let the default
bus name take over ("pci.0").
The big downside to calling it different from anyone else is that tools
that pass -device get confused. They are looking for a bus "pci.0" rather
than "pci".
To make life easier for everyone, let's just drop the name override.
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds very basic handlers for ibm,get-system-parameter and
ibm,set-system-parameter RTAS calls.
The only parameter handled at the moment is
"platform-processor-diagnostics-run-mode" which is always disabled and
does not support changing. This is expected to make
"ppc64_cpu --run-mode=1" happy.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: s/papameter/parameter/g]
Signed-off-by: Alexander Graf <agraf@suse.de>
So far POWER7+ was a part of POWER7 family. However it has a different
PVR base value so in order to support PVR masks, it needs a separate
family class.
This adds a new family class, PVR base and mask values and moves
Power7+ v2.1 CPU to a new family. The class init function is copied
from the POWER7 family.
This defines a firmware name for the new family as "PowerPC,POWER7+"
instead of previously used "PowerPC,POWER7" from the POWER7 family.
The reason for that is that the Sapphire firmware (a h0st firmware)
uses "PowerPC,POWER7+" already and since no specification defines
exactly the CPU nodes naming in the device tree, we better stay
in sync with the host firmware.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store VSX Vector Word*4 Indexed (stxvw4x)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store VSX Scalar Doubleword Indexed (stxsdx)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Vector Word*4 Indexed (lxvw4x)
instruction.
V2: changed to use deposit_i64 per Richard Henderson's review.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Vector Doubleword & Splat Indexed
(lxvdsx) instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Scalar Doubleowrd Indexed (lxsdx)
instruction.
The lower 8 bytes of the target register are undefined; this
implementation leaves those bytes unaltered.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the xxpermdi instruction. The instruction
uses bits 22, 23, 29 and 30 for non-opcode fields (DM, AX
and BX). This results in overloading of the opcode table
with aliases, which can be seen in the GEN_XX3FORM_DM
macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds VSX VSRs to the the list of global register indices.
More specifically, it adds the lower halves of the first 32 VSRs to
the list of global register indices. The upper halves of the first
32 VSRs are already defined via cpu_fpr[]. And the second 32 VSRs
are already defined via the cpu_avrh[] and cpu_avrl[] arrays.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds decoders for the VSX fields XT, XS, XA, XB and
DM. The first four are split fields and a general helper for
these types of fields is also added.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for the VSX bit of the PowerPC Machine
State Register (MSR) as well as the corresponding VSX Unavailable
exception.
The VSX bit is added to the defined bits masks of the Power7 and
Power8 CPU models.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the flag POWERPC_FLAG_VSX to the list of defined
flags and also adds this flag to the list of supported features of
the Power7 and Power8 CPUs. Additionally, the VSX instructions
are added to the list of TCG-enabled instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
IBM POWERPC processors encode PVR as a CPU family in higher 16 bits and
a CPU version in lower 16 bits. Since there is no significant change
in behavior between versions, there is no point to add every single CPU
version in QEMU's CPU list. Also, new CPU versions of already supported
CPU won't break the existing code.
This adds PVR value/mask support for KVM, i.e. for -cpu host option.
As CPU family class name for POWER7 is "POWER7-family", there is no need
to touch aliases.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The latest update to v3.13-rc3 (bf63839f) breaks the
ppc build with KVM:
kvm-all.o: In function `kvm_update_guest_debug':
kvm-all.c:1910: undefined reference to `kvm_arch_update_guest_debug'
kvm-all.o: In function `kvm_insert_breakpoint':
kvm-all.c:1937: undefined reference to `kvm_arch_insert_sw_breakpoint'
kvm-all.c:1945: undefined reference to `kvm_arch_insert_hw_breakpoint'
kvm-all.o: In function `kvm_remove_breakpoint':
kvm-all.c:1977: undefined reference to `kvm_arch_remove_sw_breakpoint'
kvm-all.c:1985: undefined reference to `kvm_arch_remove_hw_breakpoint'
kvm-all.o: In function `kvm_remove_all_breakpoints':
kvm-all.c:2009: undefined reference to `kvm_arch_remove_sw_breakpoint'
kvm-all.c:2006: undefined reference to `kvm_arch_remove_sw_breakpoint'
kvm-all.c:2017: undefined reference to `kvm_arch_remove_all_hw_breakpoints'
We need stubs until something gets implemented.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
target-arm queue:
* AES instruction support for 32 bit ARM
* pflash01: much better emulation of 2x16bit and similar configs
where multiple flash devices are banked together
* fixed CBAR handling on Zynq, Highbank
* initial AArch64 KVM control support
* first two chunks of patches for A64 instruction emulation
* new board: canon-a1100 (Canon DIGIC SoC)
* new board: cubieboard (Allwinner A10 SoC)
# gpg: Signature made Tue 17 Dec 2013 12:18:39 PM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Alexander Graf (14) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20131217: (62 commits)
MAINTAINERS: add myself to maintain allwinner-a10
hw/arm: add cubieboard support
hw/arm: add allwinner a10 SoC support
hw/intc: add allwinner A10 interrupt controller
hw/timer: add allwinner a10 timer
vmstate: Add support for an array of ptimer_state *
MAINTAINERS: Document 'Canon DIGIC' machine
hw/arm/digic: add NOR ROM support
hw/arm/digic: add UART support
hw/arm/digic: add timer support
hw/arm/digic: prepare DIGIC-based boards support
hw/arm: add very initial support for Canon DIGIC SoC
target-arm: A64: add support for logical (immediate) insns
target-arm: A64: add support for 1-src CLS insn
host-utils: add clrsb32/64 - count leading redundant sign bits
target-arm: A64: add support for bitfield insns
target-arm: A64: add support for 1-src REV insns
target-arm: A64: add support for 1-src RBIT insn
target-arm: A64: add support for 1-src data processing and CLZ
target-arm: A64: add support for 2-src shift reg insns
...
Message-id: 1387312160-12318-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
I missed to set the CC in the CHSC instruction when I refactored
the CC setting in the IO instructions with the following commit:
5d9bf1c07c
s390/ioinst: Moved the CC setting to the IO instruction handlers
This patch now restores the correct behaviour of CHSC by setting the
condition code 0 at the end of the instruction.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
If SIGP is called with an unknown order code, it has to return CC1
instead of CC3 and set the "invalid order" bit in the return status.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We've already got a helper function for calculating the
base/displacement of RS formatted instructions, so we can
get rid of the manual calculation of the SIGP order code.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The instruction intercept handler for diagnose used only the displacement
when trying to calculate the function code. This is only correct for base
0, however; we need to perform a complete base/displacement address
calculation and use bits 48-63 as the function code.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
If the guest is running in nested mode on system reset, clearing the
feature MSR signals the kernel to leave this mode. Recent kernels
processes this properly, but leave the VCPU state undefined behind. It
is the job of userspace to bring it to a proper shape. Therefore, write
this specific MSR first so that no state transfer gets lost.
This allows to cleanly reset a guest with VMX in use.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support for C3.4.4 Logical (immediate),
which include AND, ANDS, ORR, EOR.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder, function renaming,
removed a TCG temp variable]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM: cleaned up some unnecessary code in logic_imm_decode_wmask
and added clarifying commentary on what it's actually doing.
Dropped an ext32u that's not needed if we've just done an AND.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
this patch introduces wrappers for the clrsb builtins,
which count the leading redundant sign bits.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the C5.6.147 RBIT instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder, use bswap64,
make RBIT part standalone from the rest of the patch,
splitting REV into a separate patch]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for decoding 1-src data processing insns,
and the first user, C5.6.40 CLZ (count leading zeroes).
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for decoding 2-src data processing insns,
and the first users, UDIV and SDIV.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder adding the 2-src decoding level,
always zero-extend result in 32bit mode]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation support for the EXTR instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted for new decoder, removed a few temporaries,
fixed the 32bit bug, added checks for more
unallocated cases]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the instructions described in
"C3.4.6 PC-rel. addressing" (ADR and ADRP).
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder structure]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the instructions described in "C3.5.10 Logical
(shifted register)".
We store the flags in the same locations as the 32 bit decoder.
This is slightly awkward when calculating 64 bit results, but seems
a better tradeoff than having to rework the whole 32 bit decoder
and also make 32 bit result calculation in A64 awkward.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: some refactoring to avoid hidden allocation of temps,
rework flags, use enums for shift types,
renaming of functions]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM: Use TCG's andc/orc/eqv ops rather than manually inverting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for the instruction group "C3.5.6
Conditional select": CSEL, CSINC, CSINV, CSNEG.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM: Improved code generated in the nomatch case as per RTH suggestions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the compare and branch insns,
CBZ and CBNZ.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder,
compare with immediate 0,
introduce read_cpu_reg to get the 0 extension on (!sf)]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the test and branch insns,
TBZ and TBNZ.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio:
adapted for new decoder
always compare with 0
remove a TCG temporary
]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the conditional branch (b.cond) instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder structure,
reused arm infrastructure for checking the flags]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement BR, BLR and RET. This is all of the 'unconditional
branch (register)' instruction category except for ERET
and DPRS (which are system mode only).
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: reimplemented on top of new decoder structure]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the B and BL instructions (PC relative branches and calls).
For convenience in managing TCG temporaries which might be generated
if a source register is the zero-register XZR, we provide a simple
mechanism for creating a new temp which is automatically freed at the
end of decode of the instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: renamed functions, adapted to new decoder layout]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Decode the various kinds of system instructions:
hints (HINT), which include NOP, YIELD, WFE, WFI, SEV, SEL
sync instructions, which include CLREX, DSB, DMB, ISB
msr_i, which move immediate to processor state field
sys, which include all SYS and SYSL instructions
msr, which move from a gp register to a system register
mrs, which move from a system register to a gp register
Provide implementations where they are trivial nops.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Provide a skeleton for a64 instruction decoding in translate-a64.c,
by dividing instructions into the classes defined by the
ARM Architecture Reference Manual(DDI0487A_a) section C3.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We will need helpers that only make sense with AArch64. Add
helper-a64.{c,h} files as stubs that we can fill with these
helpers in the following patches.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The information which AArch32 holds in the FPSCR is split for
AArch64 into two logically distinct registers, FPSR and FPCR.
Since they are carefully arranged to use non-overlapping bits,
we leave the underlying state in the same place, and provide
accessor functions which just update the appropriate bits
via vfp_get_fpscr() and vfp_set_fpscr().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When executing translation blocks we need to be able to recover
our program counter. Add a method to set it for AArch64 CPUs.
This covers user-mode, but for system mode emulation we will
need to check if the CPU is in an AArch32 execution state.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The A32/T32 gen_intermediate_code_internal() is complicated because it
has to deal with:
* conditionally executed instructions
* Thumb IT blocks
* kernel helper page
* M profile exception-exit special casing
None of these apply to A64, so putting the "this is A64 so
call the A64 decoder" check in the middle of the A32/T32
loop is confusing and means the A64 decoder's handling of
things like conditional jump and singlestepping has to take
account of the conditional-execution jumps the main loop
might emit.
Refactor the code to give A64 its own gen_intermediate_code_internal
function instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This commit adds support for booting a single AArch64 CPU by setting
appropriate registers. The bootloader includes placeholders for Board-ID
that are used to implement uniform indexing across different bootloaders.
Signed-off-by: Mian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-7-git-send-email-peter.maydell@linaro.org
[PMM:
* updated to use ARMInsnFixup style bootloader fragments
* dropped virt.c additions
* use runtime checks for "is this an AArch64 core" rather than ifdefs
* drop some unnecessary setting of registers in reset hook
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
For AArch64 we will obviously require a different set of
primary and secondary boot loader code fragments. However currently
we hardcode the offsets into the loader code where we must write
the entrypoint and other data into arm_load_kernel(). This makes it
hard to substitute a different loader fragment, so switch to a more
flexible scheme where instead of a raw array of instructions we use
an array of (instruction, fixup-type) pairs that indicate which
words need special action or data written into them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-6-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Enable KVM if the host and target CPU are both aarch64. Note
that host aarch64 + target arm is not valid for KVM acceleration:
the 64 bit kernel does not support the ioctl interface for
32 bit CPUs. 32 bit VMs on 64 bit hosts need to be created
using the 64 bit ioctl interface; when QEMU supports this it
will be on the arch64-softmmu target with a -cpu parameter for
a 32 bit CPU, which is still an aarch64/aarch64 combination
as far as configure is concerned.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Add the bare minimum set of functions needed for control of an
AArch64 KVM vcpu:
* CPU initialization
* minimal get/put register functions which only handle the
basic state of the CPU
Signed-off-by: Mian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-4-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled; most notably:
* code lives in kvm64.c rather than using #ifdefs
* support '-cpu host' rather than implicitly using whatever the
host's CPU is regardless of what the user requests
* fix bug attempting to get/set nonexistent X[31]
* fix bug writing 64 bit kernel pstate into uint32_t env field
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
The env->pstate field is a little odd since it doesn't strictly
speaking represent an architectural register. However it's convenient
for QEMU to use it to hold the various PSTATE architectural bits
in the same format the architecture specifies for SPSR registers
(since this is the same format the kernel uses for signal handlers
and the KVM register). Add some structure to how we deal with it:
* document what env->pstate is
* add some #defines for various bits in it
* add helpers for reading/writing it taking account of caching
of NZCV, and use them where appropriate
* reset it on startup
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Fix the CBAR initialisation by using the newly defined static property.
CBAR is now set before realization, so the intended value is now
actually used.
So I have kind of tested this. I booted an ARM kernel on Highbank with
the stock Highbank DTB. It doesn't boot (and I will be doing something
wrong), but before this patch I got this:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /workspaces/pcrost/public/linux2.git/arch/arm/mm/ioremap.c:301 __arm_ioremap_pfn_caller+0x180/0x198()
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.13.0-rc1-next-20131126-dirty #2
[<c0015164>] (unwind_backtrace) from [<c00118c0>] (show_stack+0x10/0x14)
[<c00118c0>] (show_stack) from [<c02bd5fc>] (dump_stack+0x78/0x90)
[<c02bd5fc>] (dump_stack) from [<c001f110>] (warn_slowpath_common+0x68/0x84)
[<c001f110>] (warn_slowpath_common) from [<c001f1f4>] (warn_slowpath_null+0x1c/0x24)
[<c001f1f4>] (warn_slowpath_null) from [<c0017c6c>] (__arm_ioremap_pfn_caller+0x180/0x198)
[<c0017c6c>] (__arm_ioremap_pfn_caller) from [<c0017cd8>] (__arm_ioremap_caller+0x54/0x5c)
[<c0017cd8>] (__arm_ioremap_caller) from [<c0017d10>] (__arm_ioremap+0x18/0x1c)
[<c0017d10>] (__arm_ioremap) from [<c03913c0>] (highbank_init_irq+0x34/0x8c)
[<c03913c0>] (highbank_init_irq) from [<c038c228>] (init_IRQ+0x28/0x2c)
[<c038c228>] (init_IRQ) from [<c03899ec>] (start_kernel+0x234/0x398)
[<c03899ec>] (start_kernel) from [<00008074>] (0x8074)
---[ end trace 3406ff24bd97382f ]---
Which disappears with this patch.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: fedec366aaa512d75093635f523d1dbcb3358361.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some processors (notably A9 within Highbank) define and use the
CP15 configuration base address (CBAR). This is vendor specific
so its best implemented as a CPU property (otherwise we would need
vendor specific child classes for every ARM implementation).
This patch prepares support for converting CBAR reset value to
a CPU property by moving the CP registration out of the CPU
init fn, as registration will need to happen at realize time
to pick up any property updates. The easiest way to do this
is via definition of a new ARM_FEATURE to flag the existence
of the register.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 9f697ef1e2ee60a3b9ef971a7f3bc3fa6752a9b7.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix NOR flash manufacturer and device ID reading. This now
properly takes into account device widths and device max widths
as required. The reading of these IDs uses the same max_width
dependent addressing as CFI queries.
The old code remains for chips that don't specify a device width,
as the new code relies on a device width being set in order to
properly operate. The existing code seems very broken.
Only ident0 and ident1 are used in the new code, as other fields
relate to the lock state of blocks in flash.
The VExpress flash configuration has been updated to match
the new code, as the existing definition was 'wrong' in order
to return the expected results with the broken device ID code.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-8-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change fixes the CFI query responses to handle NOR device
widths that are different from the bank width. Support is also
added for multi-width devices in a x8 configuration. This is
typically x8/x16 devices, but the CFI specification mentions
x8/x32 devices so those should be supported as well if they
exist.
The query response data is now replicated per-device in the bank,
and is adjusted for x16 or x32 parts configured in x8 mode.
The existing code is left in place for boards that have not
been updated to specify an explicit device_width. The VExpress
board has been updated in an earlier patch in this series so
this is the only board currently affected.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-7-git-send-email-roy.franz@linaro.org
[PMM: fixed a few formatting nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For handling CFI and device ID reads, we need to not only know the
width that a NOR flash device is configured for, but also its maximum
width. The maximum width addressing mode is used for multi-width
parts no matter which width they are configured for. The most common
case is x16 parts that also support x8 mode. When configured for x8
operation these devices respond to CFI and device ID requests differently
than native x8 NOR parts.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-6-git-send-email-roy.franz@linaro.org
[PMM: Added comment explaining the semantics of width vs device-width
vs max-device-width]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create vexpress specific pflash registration
function which properly configures the device-width
of 16 bits (2 bytes) for the NOR flash on the
vexpress platform. This change is required for
buffered flash writes to work properly.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-5-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we know how wide each flash device that makes up the bank is,
return status for each device in the bank. Leave existing code
that treats 32 bit wide banks as composed of two 16 bit devices as otherwise
we may break configurations that do not set the device_width propery.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-4-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The width of the devices that make up the flash interface
is required to mask certain commands, in particular the
write length for buffered writes. This length will be presented
to each device on the interface by the program writing the flash,
and the flash emulation code needs to be able to determine
the length of the write as recieved by each flash device.
The device-width defaults to the bank width which should
maintain existing behavior for platforms that don't need
this change.
This change is required to support buffered writes on the
vexpress platform that has a 32 bit flash interface with 2
16 bit devices on it.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-3-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_opts_parse() can always return NULL, even if the QemuOptsList.desc in
question would be trivial to satisfy (eg. because it's empty). For
example:
qemu_opts_parse()
opts_parse()
qemu_opts_create()
id_wellformed()
In practice:
$ .../qemu-system-x86_64 -acpitable id=3
qemu-system-x86_64: -acpitable id=3: Parameter 'id' expects an identifier
**
ERROR:vl.c:3491:main: assertion failed: (opts != NULL)
Aborted (core dumped)
$ .../qemu-system-x86_64 -smbios id=3
qemu-system-x86_64: -smbios id=3: Parameter 'id' expects an identifier
Segmentation fault (core dumped)
I checked all qemu_opts_parse() invocations (and all drive_def()
invocations too, because it blindly forwards the former's retval). Only
the two above examples look problematic.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1385658779-7529-1-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Collection of little cleanups anf bugfixes.
nbd patches in preparation of spice-nbd.
# gpg: Signature made Mon 16 Dec 2013 01:27:45 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
# By Marc-André Lureau (12) and Gerd Hoffmann (4)
# Via Gerd Hoffmann
* spice/tags/pull-spice-1:
spice: stop server for qxl hard reset
spice: move spice_server_vm_{start,stop} calls into qemu_spice_display_*()
spice: move qemu_spice_display_*() from spice-graphics to spice-core
nbd: avoid uninitialized warnings
nbd: finish any pending coroutine
nbd: make nbd_client_session_close() idempotent
nbd: pass export name as init argument
nbd: don't change socket block during negotiate
Split nbd block client code
spice-char: implement chardev port event
char: add qemu_chr_fe_event()
include: add missing config-host.h include
qmp_change_blockdev() remove unused has_format
spice-char: remove unused field
vscclient: do not add a socket watch if there is not data to send
spice: flip streaming video mode to off by default
Block patches
# gpg: Signature made Fri 13 Dec 2013 09:47:03 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
# By Peter Lieven (2) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony:
blkdebug: Use QLIST_FOREACH_SAFE to resume IO
qemu-img: make progress output more accurate during convert
block: expect get_block_status errors in bdrv_make_zero
block/vvfat: Fix compiler warnings for OpenBSD
qapi-schema.json: Change 1.8 reference to 2.0
sheepdog: check if '-o redundancy' is passed from user
Message-id: 1386956943-19474-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
this fixes a potential segfault and performance regression.
If the coroutine is reentered directly in the iscsi_co_generic_cb
iscsi_process_{read,write} are interrupted and reentered any
time later. One the one hand this could happen after an iscsi_close
where the iscsi context is already gone (segfault). On the
other hand this limits the number of processed callbacks
in each aio_dispatch to one (potential performance regression).
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hard reset can happen at any time. We should be able to put qxl into a
known-good state no matter what. Stop spice server thread for reset so
it can't be confused by fetching stale commands lingering around in the
rings while we reset is ongoing.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no need to keep the export name around, and it seems a better
fit as an argument in the init() call.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The caller might handle non-blocking using coroutine. Leave the choice
to the caller to use a blocking or non-blocking negotiate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Teach the chardev frontend to send event. This is used by the Spice port
chardev currently.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Video streaming detection heuristics in spice-server have problems
keeping modern desktop animations (as done by gnome shell) and real
video playback apart. This leads to jpeg compression artefacts on
your desktop, due to spice using mjpeg to send what it thinks is
a video stream.
Turn off video detection by default to avoid these artifacts.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
acpi.pci,pc,memory core fixes
Most notably this includes changes to exec to support
full 64 bit addresses.
This also flushes out patches that got queued during 1.7 freeze.
There are new tests, and a bunch of bug fixes all over the place.
There are also some changes mostly useful for downstreams.
I'm also listing myself as pc co-maintainer. I'm doing this reluctantly,
but this seems to be necessary to make sure patches are not lost or delayed too
much, and posting the MAINTAINERS patch did not seem to make anyone else
volunteer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 11 Dec 2013 10:21:51 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (14) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony: (28 commits)
pc: use macro for HPET type
hpet: fix build with CONFIG_HPET off
acpi unit-test: adjust the test data structure for better handling
acpi unit-test: load and check facs table
exec: separate sections and nodes per address space
memory.c: bugfix - ref counting mismatch in memory_region_find
hpet: enable to entitle more irq pins for hpet
hpet: inverse polarity when pin above ISA_NUM_IRQS
pci: fix pci bridge fw path
ACPI DSDT: Make control method `IQCR` serialized
acpi: strip compiler info in built-in DSDT
acpi unit-test: verify signature and checksum
smbios: Set system manufacturer, product & version by default
exec: reduce L2_PAGE_SIZE
exec: make address spaces 64-bit wide
exec: memory radix tree page level compression
exec: pass hw address to phys_page_find
exec: extend skip field to 6 bit, page entry to 32 bit
exec: replace leaf with skip
split definitions for exec.c and translate-all.c radix trees
...
Message-id: cover.1386786228.git.mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
help: add id suboption to -iscsi
scsi-disk: fix WRITE SAME with large non-zero payload
block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
scsi-disk: fix VERIFY emulation
scsi-bus: fix transfer length and direction for VERIFY command
Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Qemu-iotest 030 was broken.
When the coroutine runs and finishes, it will remove itself from the req
list, so let's use safe version of foreach to avoid use after free.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the progress output is very bumpy if the input images contains
a significant portion of unallocated sectors. This patch
checks how much sectors are allocated a priori if progress
output is selected.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
during testing around with 4k LUNs a bad target implementation
triggert an -EIO in iscsi_get_block_status, but it got never caught
resulting in an infinite loop.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The buildbot shows these compiler warnings:
block/vvfat.c: In function 'create_short_and_long_name':
block/vvfat.c:620: warning: array size (8) smaller than bound length (11)
block/vvfat.c:620: warning: array size (8) smaller than bound length (11)
block/vvfat.c:635: warning: array size (8) smaller than bound length (11)
block/vvfat.c:635: warning: array size (8) smaller than bound length (11)
They are caused by tricky code where 8 characters for the name are followed
by 3 characters for the extension, and some operations touch both name and
extension.
Using an 11 character name which includes the extension fixes the compiler
warning, satisfies cppcheck, valgrind and maybe other static and dynamic
code checkers, and even simplifies some parts of the code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We use the rom infrastructure to write firmware and/or initial kernel
blobs into guest address space. So we're basically emulating the cache
off phase on very early system bootup.
That phase is usually responsible for clearing the instruction cache for
anything it writes into cachable memory, to ensure that after reboot we
don't happen to execute stale bits from the instruction cache.
So we need to invalidate the icache every time we write a rom into guest
address space. We do not need to do this for every DMA since the guest
expects it has to flush the icache manually in that case.
This fixes random reboot issues on e5500 (booke ppc) for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VCPU TSC is not cleared by a warm reset (*), which leaves some types of Linux
guests (non-pvops guests and those with the kernel parameter no-kvmclock set)
vulnerable to the overflow in cyc2ns_offset fixed by upstream commit
9993bc635d01a6ee7f6b833b4ee65ce7c06350b1 ("sched/x86: Fix overflow in
cyc2ns_offset").
To put it in a nutshell, if such a Linux guest without the patch above applied
has been up more than 208 days and attempts a warm reset chances are that
the newly booted kernel will panic or hang.
(*) Intel Xeon E5 processors show the same broken behavior due to
the errata "TSC is Not Affected by Warm Reset" (Intel® Xeon®
Processor E5 Family Specification Update - August 2013): "The
TSC (Time Stamp Counter MSR 10H) should be cleared on
reset. Due to this erratum the TSC is not affected by warm
reset."
Cc: Will Auld <will.auld@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp>
Newer kernels are capable of synchronizing TSC values of multiple VCPUs
on writeback, but we were excluding the power up case, which is not needed
anymore.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp>
Add some MPX related definiation, and hardcode sizes and offsets
of xsave features 3 and 4. It also add corresponding part to
kvm_get/put_xsave, and vmstate.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
make hpet_find inline so we don't need
to build hpet.c to check if hpet is enabled.
Fixes link error with CONFIG_HPET off.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ensure more then one instance of test_data may exist
at a given time. It will help to compare different
acpi table versions.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
FACS table does not have a checksum, so we can
check at least the signature (existence).
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Every address space has its own nodes and sections, but
it uses the same global arrays of nodes/section.
This limits the number of devices that can be attached
to the guest to 20-30 devices. It happens because:
- The sections array is limited to 2^12 entries.
- The main memory has at least 100 sections.
- Each device address space is actually an alias to
main memory, multiplying its number of nodes/sections.
Remove the limitation by using separate arrays of
nodes and sections for each address space.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'address_space_get_flatview' gets a reference to a FlatView.
If the flatview lookup fails, the code returns without
"unreferencing" the view.
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Owning to some different hardware design, piix and q35 need
different compat. So making them diverge.
On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23
can be assigned to hpet as guest chooses. So we introduce intcap
property to do that.
Consider the compat and piix/q35, we finally have the following
value for intcap: For piix, hpet's intcap is hard coded as IRQ2.
For pc-q35-1.7 and earlier, we use IRQ2 for compat reason. Otherwise
IRQ2, IRQ8, and IRQ16~23 are allowed.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to hpet spec, hpet irq is high active. But according to
ICH spec, there is inversion before the input of ioapic. So the OS
will expect low active on this IRQ line. (On bare metal, if OS driver
claims high active on this line, spurious irq is generated)
We fold the emulation of this inversion inside the hpet logic.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu uses "pci" as name for pci bridges in the firmware device path.
seabios expects "pci-bridge". Result is that bootorder is broken for
devices behind pci bridges.
Some googling suggests that "pci-bridge" is the correct one. At least
PPC-based Apple machines are using this. See question "How do I boot
from a device attached to a PCI card" here:
http://www.netbsd.org/ports/macppc/faq.html
So lets change qemu to use "pci-bridge" too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Vincenzo Maffione (2) and others
# Via Stefan Hajnoczi
* stefanha/net-next:
net: Update netdev peer on link change
virtio-net: don't update mac_table in error state
MAINTAINERS: Add netmap maintainers
net: Adding netmap network backend
Message-id: 1386594692-21278-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
target-arm queue:
* support REFCNT register on integrator/cp board
* implement the A9MP's global timer
* add the 'virt' platform
* support '-cpu host' on KVM/ARM
* Cadence GEM ethernet device bugfixes
* Implement 32-bit ARMv8 VSEL, VMAXNM, VMINNM
* fix TTBCR write masking
* update 32 bit decoder to use new qemu_ld/st TCG opcodes
# gpg: Signature made Tue 10 Dec 2013 06:22:01 AM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Peter Crosthwaite (16) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20131210: (37 commits)
target-arm: fix TTBCR write masking
target-arm: Use new qemu_ld/st opcodes
target-arm: Implement ARMv8 SIMD VMAXNM and VMINNM instructions.
target-arm: Implement ARMv8 FP VMAXNM and VMINNM instructions.
softfloat: Add minNum() and maxNum() functions to softfloat.
softfloat: Remove unused argument from MINMAX macro.
target-arm: Implement ARMv8 VSEL instruction.
target-arm: Move call to disas_vfp_insn out of disas_coproc_insn.
net/cadence_gem: Don't rx packets when no rx buffer available
net/cadence_gem: Improve can_receive debug printfery
net/cadence_gem: Fix register w1c logic
net/cadence_gem: Fix small packet FCS stripping
net/cadence_gem: Fix rx multi-fragment packets
net/cadence_gem: Add missing VMSTATE_END_OF_LIST
net/cadence_gem: Implement SAR (de)activation
net/cadence_gem: Implement SAR match bit in rx desc
net/cadence_gem: Implement RX descriptor match mode flags
net/cadence_gem: Prefetch rx descriptors ASAP
net/cadence_gem: simplify rx buf descriptor walking
net/cadence_gem: Don't assert against 0 buffer address
...
Message-id: 1386686613-2390-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Change audio wakeup rate from 250 Hz to 100 Hz.
Emulation bugfixes for intel-hda and adlib.
# gpg: Signature made Mon 09 Dec 2013 06:04:16 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
# By Gerd Hoffmann (2) and others
# Via Gerd Hoffmann
* kraxel/tags/pull-audio-1:
intel-hda: fix position buffer
adlib: fix patching of port I/O addresses
audio: adjust pulse to 100Hz wakeup rate
audio: Lower default wakeup rate to 100 times / second
Message-id: 1386597974-26506-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We previously allocated 32-bits per temp for the next_free_temp entry.
We now allocate 4 bits per temp across the 4 bitmaps.
Using a linked list meant that if a translator is tweeked, resulting in
temps being freed in a different order, that would have follow-on effects
throughout the TB. Always allocating the lowest free temp means that
follow-on effects are minimized, which can make it easier to diff output
when debugging the translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Current implementation is not accurate according to ARMv7-AR reference
manual. See "B4.1.153 TTBCR, Translation Table Base Control Register,
VMSA | TTBCR format when using the Long-descriptor translation table
format". When LPAE feature is supported, EAE, bit[31] selects
translation descriptor format and, therefore, TTBCR format.
Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386657709-23399-1-git-send-email-s.fedorov@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add 'virt' platform support corresponding to arch/arm/mach-virt
in the Linux kernel tree. This has no platform-specific code but
can use any device whose kernel driver is is able to work purely
from a device tree node. We use this to instantiate a minimal
set of devices: a GIC and some virtio-mmio transports.
Signed-off-by: John Rigby <john.rigby@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-8-git-send-email-peter.maydell@linaro.org
[PMM:
Significantly overhauled:
* renamed user-facing machine to just "virt"
* removed the A9 support (it can't work since the A9 has no
generic timers)
* added virtio-mmio transports instead of random set of 'soc' devices
(though we retain a pl011 UART)
* instead of updating io_base as we step through adding devices,
define a memory map with an array (similar to vexpress)
* similarly, define irqmap with an array
* folded in some minor fixes from John's aarch64-support patch
* rather than explicitly doing endian-swapping on FDT cells,
use fdt APIs that let us just pass in host-endian values
and let the fdt layer take care of the swapping
* miscellaneous minor code cleanups and style fixes
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New ARM boards are generally expected to boot their secondary CPUs
via the PSCI interface, rather than ad-hoc "loop around in holding
pen code" as hw/arm/boot.c implements. In particular this is
necessary for mach-virt kernels. For KVM we achieve this by creating
the VCPUs with a feature flag marking them as starting in PSCI
powered-down state; the guest kernel will then make a PSCI call
(implemented in the host kernel) to start the secondaries at
an address of its choosing once it has got the primary CPU up.
Implement this setting of the feature flag, controlled by a
qdev property for ARMCPU, which board code can set if it is a
PSCI system.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-7-git-send-email-peter.maydell@linaro.org
Linux requires device tree CPU nodes to include a 'compatible'
string describing the CPU. Add a field in the ARMCPU struct for
this so that boards which construct a device tree can insert
the correct CPU nodes.
Note that there is currently no officially specified 'compatible'
string for the TI925T, Cortex-M3 or SA1110 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-6-git-send-email-peter.maydell@linaro.org
Device trees created with create_device_tree() may not have any
entries in their reservemap, because the FDT API requires that the
reservemap is completed before any FDT nodes are added, and
create_device_tree() itself creates a node. However we were not
calling fdt_finish_reservemap(), which meant that there was no
terminator in the reservemap list and whatever happened to be at the
start of the FDT data section would end up being interpreted as
reservemap entries. Avoid this by calling fdt_finish_reservemap()
to add the terminator.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1385140638-10444-3-git-send-email-peter.maydell@linaro.org
There are a number of places where it would be convenient for ARM
code to have working definitions of KVM constants even in code
which is compiled with CONFIG_KVM not set. In this situation we
can't simply include the kernel KVM headers (which might conflict
with host header definitions or not even compile on the compiler
we're using) so we have to redefine equivalent constants.
Provide a mechanism for doing this and checking that the values
match, and use it for the constants we're currently exposing
via an ad-hoc mechanism.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-2-git-send-email-peter.maydell@linaro.org
The ARM A9 MPCore has a timer that is global to all cores in the cluster.
The timer is shared but each core has a private independent comparator
and interrupt.
Based on version contributed by Francois LEGAL.
Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com
[PC changes:
* New commit message
* Re-implemented as single timer model
* Fixed backwards counting issue in polled mode
* completed VMSD fields
* macroified magic numbers (and headerified reg definitions)
* split of as device-model-only patch
* use bitops for 64 bit register access
* Fixed auto increment mode to check condition properly
* general cleanup (names/style etc).
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM:
* minor typo fixes
* added missing return after error_setg()
* dropped setting dc->no_user = 1
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Forward-port the following commit from seabios:
commit 995bbeef78b338370f426bf8d0399038c3fa259c
Author: Paul Menzel <paulepanter@users.sourceforge.net>
Date: Thu Oct 3 11:30:52 2013 +0200
The ASL Optimizing Compiler version 20130823-32 [Sep 11 2013] issues the
following warning.
$ make
[…]
Compiling IASL out/src/fw/acpi-dsdt.hex
out/src/fw/acpi-dsdt.dsl.i 360: Method(IQCR, 1, NotSerialized) {
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)
[…]
ASL Input: out/src/fw/acpi-dsdt.dsl.i - 475 lines, 19181 bytes, 316 keywords
AML Output: out/src/fw/acpi-dsdt.aml - 4407 bytes, 159 named objects, 157 executable opcodes
Listing File: out/src/fw/acpi-dsdt.lst - 143715 bytes
Hex Dump: out/src/fw/acpi-dsdt.hex - 41661 bytes
Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 246 Optimizations
[…]
After changing the parameter from `NotSerialized` to `Serialized`, the
remark is indeed gone and there is no size change.
The remark was added in ACPICA version 20130517 [1] and gives the
following explanation.
If a thread blocks within the method for any reason, and another thread
enters the method, the method will fail because an attempt will be
made to create the same (named) object twice.
In this case, issue a remark that the method should be marked
serialized. ACPICA BZ 909.
[1] ba84d0fc18
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reported-by: Marcel Apfelbaum <marcel.a@redhat.com>
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IASL stores it's revision in each table header it generates.
That's not nice since guests will see a change each time they move
between hypervisors. We generally fill our own info for tables, but we
(and seabios) forgot to do this for the built-in DSDT.
Modifications in DSDT table:
OEM ID: "BXPC" -> "BOCHS "
OEM Table ID: "BXDSDT" -> "BXPCDSDT"
Compiler ID: "INTL" -> "BXPC"
Compiler Version: 0x20130823 -> 0x00000001
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Read all ACPI tables from guest - will be useful for further unit tests.
Follow pointers between ACPI tables checking signature and format for
correctness. Verify checksum for all tables.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, we get SeaBIOS defaults: manufacturer Bochs, product Bochs,
no version. Best SeaBIOS can do, but we can provide better defaults:
manufacturer QEMU, product & version taken from QEMUMachine desc and
name.
Take care to do this only for new machine types, of course.
Note: Michael Tsirkin doesn't trust us to keep values of QEMUMachine member
product stable in the future. Use copies instead, and in a way that
makes it obvious that they're guest ABI.
Note that we can be trusted to keep values of member name, because
that has always been ABI.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With the single exception of ppc with 16M pages,
we get the same number of levels
with L2_PAGE_SIZE = 10 as with L2_PAGE_SIZE = 9.
by doing this we reduce memory footprint of a single level
in the node memory map by 2x without runtime overhead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As an alternative to commit 818f86b (exec: limit system memory
size, 2013-11-04) let's just make all address spaces 64-bit wide.
This eliminates problems with phys_page_find ignoring bits above
TARGET_PHYS_ADDR_SPACE_BITS and address_space_translate_internal
consequently messing up the computations.
In Luiz's reported crash, at startup gdb attempts to read from address
0xffffffffffffffe6 to 0xffffffffffffffff inclusive. The region it gets
is the newly introduced master abort region, which is as big as the PCI
address space (see pci_bus_init). Due to a typo that's only 2^63-1,
not 2^64. But we get it anyway because phys_page_find ignores the upper
bits of the physical address. In address_space_translate_internal then
diff = int128_sub(section->mr->size, int128_make64(addr));
*plen = int128_get64(int128_min(diff, int128_make64(*plen)));
diff becomes negative, and int128_get64 booms.
The size of the PCI address space region should be fixed anyway.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the moment, memory radix tree is already variable width, but it can
only skip the low bits of address.
This is efficient if we have huge memory regions but inefficient if we
are only using a tiny portion of the address space.
After we have built up the map, detect
configurations where a single L2 entry is valid.
We then speed up the lookup by skipping one or more levels.
In case any levels were skipped, we might end up in a valid section
instead of erroring out. We handle this by checking that
the address is in range of the resulting section.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend skip to 6 bit. As page entry doesn't fit in 16 bit
any longer anyway, extend it to 32 bit.
This doubles node map memory requirements, but follow-up
patches will save this memory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In preparation for dynamic radix tree depth support, rename is_leaf
field to skip, telling us how many bits to skip to next level.
Set to 0 for leaf.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The exec.c and translate-all.c radix trees are quite different, and
the exec.c one in particular is not limited to the CPU---it can be
used also by devices that do DMA, and in that case the address space
is not limited to TARGET_PHYS_ADDR_SPACE_BITS bits.
We want to make exec.c's radix trees 64-bit wide. As a first step,
stop sharing the constants between exec.c and translate-all.c.
exec.c gets P_L2_* constants, translate-all.c gets V_L2_*, for
consistency with the existing V_L1_* symbols. Though actually
in the softmmu case translate-all.c is also indexed by physical
addresses...
This patch has no semantic change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It doesn't make sense for a region to be INT64_MAX in size:
memory core uses UINT64_MAX as a special value meaning
"all 64 bit" this is what was meant here.
While this should never affect the spapr system which at the moment always
has < 63 bit size, this makes us hit all kind of corner case bugs with
sub-pages, so users are probably better off if we just use UINT64_MAX
instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
It doesn't make sense for a region to be INT64_MAX in size:
memory core uses UINT64_MAX as a special value meaning
"all 64 bit" this is what was meant here.
While this should never affect the PC system which at the moment always
has < 63 bit size, this makes us hit all kind of corner case bugs with
sub-pages, so users are probably better off if we just use UINT64_MAX
instead.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Address space size for bridge should be full 64 bit,
so we should use UINT64_MAX not INT64_MAX as it's size.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a bunch of files missing, and add self as maintainer. Since I'm
hacking on these anyway, it will be helpful if people Cc me on patches.
Anthony gets to review everything anyway ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We run bios, and boot a minimal boot sector that immediately halts.
Then poke at memory to find ACPI tables.
This only checks that RSDP is there.
More will be added later.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qtest uses the icount infrastructure to implement a test-driven vm_clock. This
however is not necessary when using -qtest as a "probe" together with a normal
TCG-, KVM- or Xen-based virtual machine. Hence, split out the call to
configure_icount into a new function that is called only for "-machine
accel=qtest"; and disable those commands when running with an accelerator
other than qtest.
This also fixes an assertion failure with "qemu-system-x86_64 -machine
accel=qtest" but no -qtest option. This is a valid case, albeit somewhat
weird; nothing will happen in the VM but you'll still be able to
interact with the monitor or the GUI.
Now that qtest_init is not limited to an int(void) function, change
global variables that are not used outside qtest_init to arguments.
And finally, cleanup useless parts of include/sysemu/qtest.h. The file
is not used at all for user-only emulation, and qtest is not available
on Win32 due to its usage of sigwait.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With a help of negative memory region priority PCI address space
is mapped underneath RAM regions effectively catching every access
to addresses not mapped by any other region.
It simplifies PCI address space mapping into system address space.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Temporarily allow either VirtioDeviceClass::init or
VirtioDeviceClass::realize.
Introduce VirtioDeviceClass::unrealize for symmetry.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename qdev -> dev since that's what realize's argument is called by
convention. No need to keep more "qdev" around than necessary.
Avoid duplicate VIRTIO_DEVICE() cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename qdev -> dev because that's what realize's argument is called by
convention. No need to keep more "qdev" around than necessary.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename qdev -> dev since that's what realize's argument is called by
convention. No need to keep more "qdev" around than necessary.
Avoid duplicate VIRTIO_DEVICE() cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename variable qdev -> dev since that's what realize's argument is
called by convention.
Avoid duplicate VIRTIO_DEVICE() cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename variable qdev -> dev since that's what realize's argument is called
by convention.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a crash in hot-unplug of virtio-pci devices behind a PCIe
switch. The crash happens because the ioeventfd is still set whent the
child is destroyed (destruction happens in postorder). Then the proxy
tries to unset to ioeventfd, but the virtqueue structure that holds the
EventNotifier has been trashed in the meanwhile. kvm_set_ioeventfd_pio
does not expect failure and aborts.
The fix is simply to move parts of uninitialization to a new
device_unplugged callback, which is called before the child is destroyed.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now we have these pairs:
- virtio_bus_plug_device/virtio_bus_destroy_device. The first
takes a VirtIODevice, the second takes a VirtioBusState
- device_plugged/device_unplug callbacks in the VirtioBusClass
(here it's just the naming that is inconsistent)
- virtio_bus_destroy_device is not called by anyone (and since
it calls qdev_free, it would be called by the proxies---but
then the callback is useless since the proxies can do whatever
they want before calling virtio_bus_destroy_device)
And there is a k->init but no k->exit, hence virtio_device_exit is
overwritten by subclasses (except virtio-9p). This cleans it up by:
- renaming the device_unplug callback to device_unplugged
- renaming virtio_bus_plug_device to virtio_bus_device_plugged,
matching the callback name
- renaming virtio_bus_destroy_device to virtio_bus_device_unplugged,
removing the qdev_free, making it take a VirtIODevice and calling it
from virtio_device_exit
- adding a k->exit callback
virtio_device_exit is still overwritten, the next patches will fix that.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to the PCI bug that prompted these patches, virtio-ccw will
segfault after the reworking of hotplug/hot-unplug. Prepare for
this by moving virtio_ccw_stop_ioeventfd to before the freeing
of the proxy device.
A better place for this could be the device_unplugged callback
for the virtio-ccw bus. However, we do not yet have a callback
that works: this patch avoids the problem while leaving the tree
bisectable.
Cc: qemu-stable@nongnu.org
Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Suggested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FR bit should be initialized to 1 for MIPS64, under condition that this
bit is writable and that CPU has an FPU unit. It should be initialized to
zero for MIPS32.
This fixes different MIPS32 issues with FPU instructions whose behaviour
defaulted to 64-bit FPU mode.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Everything before CPU_COMMON in the structure is cleared as part of a
CPU reset. This included the features flag, which indicates whether SH4A
instructions are supported or not. As a result, a CPU reset downgraded
the CPU from an SH4A to an SH4.
Signed-off-by: Bobby Bingham <koorogi@koorogi.info>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When a link change occurs on a backend (like tap), we currently do
not propage such change to the nic. As a result, when someone turns
off a link on a tap device, for instance, then a guest doesn't see
that change and continues to try to send traffic or run DHCP even
though the lower-layer is disconnected. This is OK when the network
is set up as a HUB since the the guest may be connected to other HUB
ports too, but when it's set up as a netdev, it makes thinkgs worse.
The patch addresses this by setting the peers link down only when the
peer is not a HUBPORT device. With this patch, in the following config
-netdev tap,id=net0 -device e1000,mac=XXXXX,netdev=net0
when net0 link is turned off, the guest e1000 shows lower-layer link
down. This allows guests to boot much faster in such configurations.
With windows guest, it also allows the network to recover properly
since windows will not configure the link-local IPv4 address, and
when the link is turned on, the proper address address is configured.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
mac_table was always cleaned up first in handling
VIRTIO_NET_CTRL_MAC_TABLE_SET command, and we din't recover
mac_table content in error state, it's not correct.
This patch makes all the changes in temporal variables,
only update the real mac_table if everything is ok.
We won't change mac_table in error state, so rxfilter
notification isn't needed.
This patch also fixed same problame in
http://lists.nongnu.org/archive/html/qemu-devel/2013-11/msg01188.html
(not merge)
I will send patch for virtio spec to clarifying this change.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.
To compile QEMU with netmap support, use the following configure
options:
./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
http://info.iet.unipi.it/~luigi/netmap/
The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this converts read, write and flush functions from aio to coroutines
eliminating almost 200 lines of code.
The requirement for libiscsi is bumped to version 1.4.0 which was
released in may 2012.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VERIFY emulation was completely botched (and remained botched through
all the refactorings). The command must be emulated both in check-medium
mode (BYTCHK=00, which we implement by doing nothing) and in check-bytes
mode (which we do not implement yet). Unlike WRITE AND VERIFY (which we
treat simply as WRITE with FUA bit set), VERIFY cannot be handled like
READ. In fact the device is _receiving_ data for VERIFY, not _sending_
it like READ.
Cc: qemu-stable@nongnu.org
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
See https://bugs.launchpad.net/bugs/1258168
libcacard/vscclient.c: In function 'do_socket_read':
libcacard/vscclient.c:410: warning: implicit declaration of function 'g_warn_if_reached'
libcacard/vscclient.c:410: warning: nested extern declaration of 'g_warn_if_reached'
libcacard/vscclient.c: In function 'main':
libcacard/vscclient.c:763: warning: implicit declaration of function 'g_byte_array_unref'
libcacard/vscclient.c:763: warning: nested extern declaration of 'g_byte_array_unref'
...
libcacard/vscclient.o: In function `do_socket_read':
libcacard/vscclient.c:410: undefined reference to `g_warn_if_reached'
libcacard/vscclient.o: In function `main':
libcacard/vscclient.c:763: undefined reference to `g_byte_array_unref'
g_warn_if_reached was added in glib 2.16, and g_byte_array_unref is
supported since glib 2.22. QEMU requires glib 2.12, so both names must
not be used.
Instead of showing a warning for code which should not be reached,
vscclient better stop running, so g_warn_if_reached is not useful for
vscclient.
In libcacard/vsclient.c, g_byte_array_unref can be replaced by
g_byte_array_free. This is not generally true, so adding a compatibility
layer in include/glib-compat.h is no option here.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reported-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Commit ac86048bcd removed trace.h from
console.h and ignored the fact that qxl-render.c needs this file
(it includes qxl.h which includes console.h which included trace.h).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-07 22:26:07 +04:00
1195 changed files with 77787 additions and 23400 deletions
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
