According to Error API, usage of ERRP_GUARD() or a local Error instead
of errp is needed if errp is passed to void functions, where it is later
dereferenced to see if an error occurred.
There are several places in multifd.c that use local Error although it
is not needed. Change these places to use errp directly.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20231231093016.14204-12-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
According to Error API, usage of ERRP_GUARD() or a local Error instead
of errp is needed if errp is passed to void functions, where it is later
dereferenced to see if an error occurred.
There are several places in migration.c that use local Error although it
is not needed. Change these places to use errp directly.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20231231093016.14204-11-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
migration_channel_read_peek() calls qio_channel_readv_full() and handles
both cases of return value == 0 and return value < 0 the same way, by
calling error_setg() with errp. However, if return value < 0, errp is
already set, so calling error_setg() with errp will lead to an assert.
Fix it by handling these cases separately, calling error_setg() with
errp only in return value == 0 case.
Fixes: 6720c2b327 ("migration: check magic value for deciding the mapping of channels")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20231231093016.14204-10-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
If multifd_load_setup() fails in migration_ioc_process_incoming(),
error_setg() is called with errp. This will lead to an assert because in
that case errp already contains an error.
Fix it by removing the redundant error_setg().
Fixes: 6720c2b327 ("migration: check magic value for deciding the mapping of channels")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20231231093016.14204-9-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
If there is an error in multifd TLS handshake task,
multifd_tls_outgoing_handshake() retrieves the error with
qio_task_propagate_error() but never frees it.
Fix it by freeing the obtained Error.
In addition, the error is not reported at all, so report it with
migrate_set_error().
Fixes: 2964714015 ("migration/tls: add support for multifd tls-handshake")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20231231093016.14204-8-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add an option to suspend the src in a-b-bootblock.S, which puts the guest
in S3 state after one round of writing to memory. The option is enabled by
poking a 1 into the suspend_me word in the boot block prior to starting the
src vm. Generate symbol offsets in a-b-bootblock.h so that the suspend_me
offset is known. Generate the bootblock for each test, because suspend_me
may differ for each.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/1704312341-66640-11-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Restoring a snapshot can break a suspended guest. Snapshots suffer from
the same suspended-state issues that affect live migration, plus they must
handle an additional problematic scenario, which is that a running vm must
remain running if it loads a suspended snapshot.
To save, the existing vm_stop call now completely stops the suspended
state. Finish with vm_resume to leave the vm in the state it had prior
to the save, correctly restoring the suspended state.
To load, if the snapshot is not suspended, then vm_stop + vm_resume
correctly handles all states, and leaves the vm in the state it had prior
to the load. However, if the snapshot is suspended, restoration is
trickier. First, call vm_resume to restore the state to suspended so the
current state matches the saved state. Then, if the pre-load state is
running, call wakeup to resume running.
Prior to these changes, the vm_stop to RUN_STATE_SAVE_VM and
RUN_STATE_RESTORE_VM did not change runstate if the current state was
suspended, but now it does, so allow these transitions.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-8-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
A guest that is migrated in the suspended state automaticaly wakes and
continues execution. This is wrong; the guest should end migration in
the same state it started. The root cause is that the outgoing migration
code automatically wakes the guest, then saves the RUNNING runstate in
global_state_store(), hence the incoming migration code thinks the guest is
running and continues the guest if autostart is true.
On the outgoing side, delete the call to qemu_system_wakeup_request().
Now that vm_stop completely stops a vm in the suspended state (from the
preceding patches), the existing call to vm_stop_force_state is sufficient
to correctly migrate all vmstate.
On the incoming side, call vm_start if the pre-migration state was running
or suspended. For the latter, vm_start correctly restores the suspended
state, and a future system_wakeup monitor request will cause the vm to
resume running.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-7-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
When a vm transitions from running to suspended, runstate notifiers are
not called, so the notifiers still think the vm is running. Hence, when
we call vm_start to restore the suspended state, we call vm_state_notify
with running=1. However, some notifiers check for RUN_STATE_RUNNING.
They must check the running boolean instead.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-4-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Currently, a vm in the suspended state is not completely stopped. The VCPUs
have been paused, but the cpu clock still runs, and runstate notifiers for
the transition to stopped have not been called. This causes problems for
live migration. Stale cpu timers_state is saved to the migration stream,
causing time errors in the guest when it wakes from suspend, and state that
would have been modified by runstate notifiers is wrong.
Modify vm_stop to completely stop the vm if the current state is suspended,
transition to RUN_STATE_PAUSED, and remember that the machine was suspended.
Modify vm_start to restore the suspended state.
This affects all callers of vm_stop and vm_start, notably, the qapi stop and
cont commands:
old behavior:
RUN_STATE_SUSPENDED --> stop --> RUN_STATE_SUSPENDED
new behavior:
RUN_STATE_SUSPENDED --> stop --> RUN_STATE_PAUSED
RUN_STATE_PAUSED --> cont --> RUN_STATE_SUSPENDED
For example:
(qemu) info status
VM status: paused (suspended)
(qemu) stop
(qemu) info status
VM status: paused
(qemu) system_wakeup
Error: Unable to wake up: guest is not in suspended state
(qemu) cont
(qemu) info status
VM status: paused (suspended)
(qemu) system_wakeup
(qemu) info status
VM status: running
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
virtio,pc,pci: features, cleanups, fixes
vhost-scsi support for worker ioctls
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmWKohIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpG2YH/1rJGV8TQm4V8kcGP9wOknPAMFADnEFdFmrB
# V+JEDnyKrdcEZLPRh0b846peWRJhC13iL7Ks3VNjeVsfE9TyzNyNDpUzCJPfYFjR
# 3m8ChLDvE9tKBA5/hXMIcgDXaYcPIrPvHyl4HG8EQn7oaeMpS2uecKqDpDDvNXGq
# oNamNvqimFSqA+3ChzA+0Qt07Ts7xFEw4OEXSwfRXlsam/dhQG0SI+crRheHuvFb
# HR8EwmNydA1D/M51AuBNuvX36u3SnPWm7Anp5711SZ1b59unshI0ztIqIJnGkvYe
# qpUJSmxR6ulwWe4nQfb+GhBsuJ2j2ORC7YfXyAT7mw8rds8loaI=
# =cNy2
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Dec 2023 04:51:14 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (21 commits)
vdpa: move memory listener to vhost_vdpa_shared
vdpa: use dev_shared in vdpa_iommu
vdpa: use VhostVDPAShared in vdpa_dma_map and unmap
vdpa: move iommu_list to vhost_vdpa_shared
vdpa: remove msg type of vhost_vdpa
vdpa: move backend_cap to vhost_vdpa_shared
vdpa: move iotlb_batch_begin_sent to vhost_vdpa_shared
vdpa: move file descriptor to vhost_vdpa_shared
vdpa: use vdpa shared for tracing
vdpa: move shadow_data to vhost_vdpa_shared
vdpa: move iova_range to vhost_vdpa_shared
vdpa: move iova tree to the shared struct
vdpa: add VhostVDPAShared
vdpa: do not set virtio status bits if unneeded
Fix bugs when VM shutdown with virtio-gpu unplugged
vhost-scsi: fix usage of error_reportf_err()
hw/acpi: propagate vcpu hotplug after switch to modern interface
vhost-scsi: Add support for a worker thread per virtqueue
vhost: Add worker backend callouts
tests: bios-tables-test: Rename smbios type 4 related test functions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
dirtylimit dirtyrate pull request 20231225
Nitpick about an unused parameter
Please apply, thanks,
Yong
# -----BEGIN PGP SIGNATURE-----
#
# iQJKBAABCAA0FiEEaF0CINwmSCgVLlfC3/Ij1rP+y5wFAmWJVtkWHHlvbmcuaHVh
# bmdAc21hcnR4LmNvbQAKCRDf8iPWs/7LnLexEADjuQ7dtbv2vq1ksqDq6fct++FK
# sGPe6P9UAyJrB0qxW3jKRn2P4E/xiPHpmi+BbOOu8PppeZt86NFlzun681vMpkKu
# d3oAlwRtX8eklk3oub+yBXzkAfsGr+EHEWms/12ATsd6apItxi47zUUw/2aznujz
# TlZR7qOD1kjvPHOVnP07fQ3NYiPIITpzSqVgo3fxE+upmb+dnELIkyGTAvJY2Pjz
# Uh4CtG/sQq8OJJwUn1TFmhB1Ujw9oo8v/lOtIpsxfcKtQcAwyvgmyfndOMZ/h6O3
# ri3axypg8PyGyidYEh0JSoR3OVUIt5eoqPNp+sQTNeZsjTIwKjpBGUOLXbIA56nB
# Z/ZRbxSKj+JRD9qQZ2NODE1QurgEuT51aWkEeBEsx0OtUINcjZkwWeQmiasJQw1T
# 4z4Hez0ipuET9MmeTbWkVh9rO3Bsxi9QxiXEiN6YPNqTqLhwomXU+MIlrCsZQzjB
# l4Jij9byeWL9ntx3qwtSWJGHV6Qql16UkPo+c2Co/q2rdx/FqiYrMgCtLee1yo5n
# lSCKmrVMLaLyQv7jnLY8txhU7/CXNnwij4YSgfi7nujOgM6L3uwYc9Tp5kcQHE/b
# o/Mr6oOi79Z+rdByk4pPUKaJV7FnbWMoUgjsqWPJgedGt0K9StRsXCGR1wYMUVdU
# R8Dv0IZyyGuSf6MhNw==
# =Y00D
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Dec 2023 05:18:01 EST
# gpg: using RSA key 685D0220DC264828152E57C2DFF223D6B3FECB9C
# gpg: issuer "yong.huang@smartx.com"
# gpg: Good signature from "Yong Huang <yong.huang@smartx.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 685D 0220 DC26 4828 152E 57C2 DFF2 23D6 B3FE CB9C
* tag 'dirtylimit-dirtyrate-pull-request-20231225' of https://github.com/newfriday/qemu:
migration/dirtyrate: Remove an extra parameter
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the memory listener to a common place rather than always in the
first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-14-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iommu_list member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-11-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the backend_cap member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-9-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iotlb_batch_begin_sent member to VhostVDPAShared so all
vhost_vdpa can use it, rather than always in the first / last
vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-8-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the file descriptor to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-7-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the shadow_data member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-5-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iova range to VhostVDPAShared so all vhost_vdpa can use it,
rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-4-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iova tree to VhostVDPAShared so all vhost_vdpa can use it,
rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-3-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will hold properties shared among all vhost_vdpa instances associated
with of the same device. For example, we just need one iova_tree or one
memory listener for the entire device.
Next patches will register the vhost_vdpa memory listener at the
beginning of the VM migration at the destination. This enables QEMU to
map the memory to the device before stopping the VM at the source,
instead of doing while both source and destination are stopped, thus
minimizing the downtime.
However, the destination QEMU is unaware of which vhost_vdpa struct will
register its memory_listener. If the source guest has CVQ enabled, it
will be the one associated with the CVQ. Otherwise, it will be the
first one.
Save the memory operations related members in a common place rather than
always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-2-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio-gpu malloc memory for the queue when it realized, but the queues was not
released when it unrealized, which resulting in a memory leak. In addition,
vm_change_state_handler is not cleaned up, which is related to vdev and will
lead to segmentation fault when VM shutdown.
Signed-off-by: wangmeiling <wangmeiling21@huawei.com>
Signed-off-by: Binfeng Wu <wubinfeng@huawei.com>
Message-Id: <7bbbc0f3-2ad9-83ca-b39b-f976d0837daf@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is required to use error_report() instead of error_reportf_err(), if the
prior function does not take local_err as the argument. As a result, the
local_err is always NULL and segment fault may happen.
vhost_scsi_start()
-> vhost_scsi_set_endpoint(s) --> does not allocate local_err
-> error_reportf_err()
-> error_vprepend()
-> g_string_append(newmsg, (*errp)->msg) --> (*errp) is NULL
In addition, add ": " at the end of other error_reportf_err() logs.
Fixes: 7962e432b4 ("vhost-user-scsi: support reconnect to backend")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20231214003117.43960-1-dongli.zhang@oracle.com>
Reviewed-by: Feng Li <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If a vcpu with an apic-id that is not supported by the legacy
interface (>255) is hot-plugged, the legacy code will dynamically switch
to the modern interface. However, the hotplug event is not forwarded to
the new interface resulting in the vcpu not being fully/properly added
to the machine config. This BUG is evidenced by OVMF when it
it attempts to count the vcpus and reports an inconsistent vcpu count
reported by the fw_cfg interface and the modern hotpug interface.
Fix is to propagate the hotplug event after making the switch from
the legacy interface to the modern interface.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Aaron Young <aaron.young@oracle.com>
Message-Id: <0e8a9baebbb29f2a6c87fd08e43dc2ac4019759a.1702398644.git.Aaron.Young@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support for vhost-scsi to be able to create a worker thread
per virtqueue. Right now for vhost-net we get a worker thread per
tx/rx virtqueue pair which scales nicely as we add more virtqueues and
CPUs, but for scsi we get the single worker thread that's shared by all
virtqueues. When trying to send IO to more than 2 virtqueues the single
thread becomes a bottlneck.
This patch adds a new setting, worker_per_virtqueue, which can be set
to:
false: Existing behavior where we get the single worker thread.
true: Create a worker per IO virtqueue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204231618.21962-3-michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Since the driver doesn't support interrupts, we must return early when
index is set to VIRTIO_CONFIG_IRQ_IDX. Basically the same thing Viresh
did for "91208dd297f2 virtio: i2c: Check notifier helpers for
VIRTIO_CONFIG_IRQ_IDX".
Fixes: 544f0278af ("virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX")
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Message-Id: <20231025171841.3379663-1-mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some options for -display cocoa were not described or not listed at all.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Apparently the help entries were not merged when the patches got in.
Fixes: f844cdb997 ("ui/cocoa: capture all keys and combos when mouse is grabbed")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
These are now redundant with the scr2 and old_scr2 fields in NeXTPC. Rename
the function from nextscr2_write() to next_scr2_rtc_update() to better
reflect its purpose. At the same time replace the manual bit manipulation with
the extract32() and deposit32() functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the old_scr2 variable to NeXTPC so that the old SCR2 register state is
stored along with the current SCR2 state.
Since the SCR2 register is 32-bits wide, convert old_scr2 to uint32_t and
update the SCR2 register access code to allow unaligned writes.
Note that this is a migration break, but as nothing will currently boot then
we do not need to worry about this now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The phase variable represents part of the state machine used to clock data out
of the NextRtc device.
Note that this is a migration break for the NeXTRtc struct, but as nothing will
currently boot then we simply bump the migration version for now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Rename dma_ops to next_dma_ops and the read/write functions to next_dma_read()
and next_dma_write() respectively, mark next_dma_ops as DEVICE_BIG_ENDIAN and
also improve the consistency of the val variable in next_dma_read() and
next_dma_write().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The old QEMU memory accessors used in the original NextCube patch series had
separate functions for 1, 2 and 4 byte accessors. When the series was finally
merged a simple wrapper function was written to dispatch the memory accesses
using the original functions.
Convert scr_ops to use the memory API directly renaming it to next_scr_ops,
marking it as DEVICE_BIG_ENDIAN, and handling any unaligned accesses.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The old QEMU memory accessors used in the original NextCube patch series had
separate functions for 1, 2 and 4 byte accessors. When the series was finally
merged a simple wrapper function was written to dispatch the memory accesses
using the original functions.
Convert mmio_ops to use the memory API directly renaming it to next_mmio_ops,
marking it as DEVICE_BIG_ENDIAN, and handling any unaligned accesses.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Normally a DMA FLUSH command is used to ensure that data is completely written
to the device and/or memory, so remove the pulse of the SCSI DMA IRQ if a DMA
FLUSH command is received. This enables the NeXT ROM monitor to start to load
from a SCSI disk.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
pull-loongarch-20231221
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZYPyvQAKCRBAov/yOSY+
# 38/vBADT3b+Wo/2AeXOO3OXOM1VBhIvzDjY1OWytuJpkF3JGW45cMLqgtIgMj8h7
# NtzRS3JbFYbYuxITeeo1Ppl6dAD0pCZjIU6OCBxAJ6ADPsE/xD8nYWrMGqYVXg7E
# hN0Cno2sf6dmJ0QxUxn7G+cUuvNtnGaDSZE+RAkjtzq1nvx7CQ==
# =mte5
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Dec 2023 03:09:33 EST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20231221' of https://gitlab.com/gaosong/qemu:
target/loongarch: Add timer information dump support
hw/loongarch/virt: Align high memory base address with super page size
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the iothread-vq-mapping parameter to assign virtqueues to IOThreads.
Store the vq:AioContext mapping in the new struct
VirtIOBlockDataPlane->vq_aio_context[] field and refactor the code to
use the per-vq AioContext instead of the BlockDriverState's AioContext.
Reimplement --device virtio-blk-pci,iothread= and non-IOThread mode by
assigning all virtqueues to the IOThread and main loop's AioContext in
vq_aio_context[], respectively.
The comment in struct VirtIOBlockDataPlane about EventNotifiers is
stale. Remove it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231220134755.814917-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio-blk and virtio-scsi devices will need a way to specify the
mapping between IOThreads and virtqueues. At the moment all virtqueues
are assigned to a single IOThread or the main loop. This single thread
can be a CPU bottleneck, so it is necessary to allow finer-grained
assignment to spread the load.
Introduce DEFINE_PROP_IOTHREAD_VQ_MAPPING_LIST() so devices can take a
parameter that maps virtqueues to IOThreads. The command-line syntax for
this new property is as follows:
--device '{"driver":"foo","iothread-vq-mapping":[{"iothread":"iothread0","vqs":[0,1,2]},...]}'
IOThreads are specified by name and virtqueues are specified by 0-based
index.
It will be common to simply assign virtqueues round-robin across a set
of IOThreads. A convenient syntax that does not require specifying
individual virtqueue indices is available:
--device '{"driver":"foo","iothread-vq-mapping":[{"iothread":"iothread0"},{"iothread":"iothread1"},...]}'
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231220134755.814917-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qdev_alias_all_properties() aliases a DeviceState's qdev properties onto
an Object. This is used for VirtioPCIProxy types so that --device
virtio-blk-pci has properties of its embedded --device virtio-blk-device
object.
Currently this function is implemented using qdev properties. Change the
function to use QOM object class properties instead. This works because
qdev properties create QOM object class properties, but it also catches
any QOM object class-only properties that have no qdev properties.
This change ensures that properties of devices are shown with --device
foo,\? even if they are QOM object class properties.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231220134755.814917-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
StringOutputVisitor crashes when it visits a struct because
->start_struct() is NULL.
Show "<omitted>" instead of crashing. This is necessary because the
virtio-blk-pci iothread-vq-mapping parameter that I'd like to introduce
soon is a list of IOThreadMapping structs.
This patch is a quick fix to solve the crash, but the long-term solution
is replacing StringOutputVisitor with something that can handle the full
gamut of values in QEMU.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231212134934.500289-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use qemu_get_current_aio_context() in mixed wrappers and coroutine
wrappers so that code runs in the caller's AioContext instead of moving
to the BlockDriverState's AioContext. This change is necessary for the
multi-queue block layer where any thread can call into the block layer.
Most wrappers are IO_CODE where it's safe to use the current AioContext
nowadays. BlockDrivers and the core block layer use their own locks and
no longer depend on the AioContext lock for thread-safety.
The bdrv_create() wrapper invokes GLOBAL_STATE code. Using the current
AioContext is safe because this code is only called with the BQL held
from the main loop thread.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230912231037.826804-6-stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The AioContext lock no longer exists.
There is one noteworthy change:
- * More specifically, these functions use BDRV_POLL_WHILE(bs), which
- * requires the caller to be either in the main thread and hold
- * the BlockdriverState (bs) AioContext lock, or directly in the
- * home thread that runs the bs AioContext. Calling them from
- * another thread in another AioContext would cause deadlocks.
+ * More specifically, these functions use BDRV_POLL_WHILE(bs), which requires
+ * the caller to be either in the main thread or directly in the home thread
+ * that runs the bs AioContext. Calling them from another thread in another
+ * AioContext would cause deadlocks.
I am not sure whether deadlocks are still possible. Maybe they have just
moved to the fine-grained locks that have replaced the AioContext. Since
I am not sure if the deadlocks are gone, I have kept the substance
unchanged and just removed mention of the AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-15-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The SCSI subsystem no longer uses the AioContext lock. Request
processing runs exclusively in the BlockBackend's AioContext since
"scsi: only access SCSIDevice->requests from one thread" and hence the
lock is unnecessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-13-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Delete these functions because nothing calls these functions anymore.
I introduced these APIs in commit 98563fc3ec ("aio: add
aio_context_acquire() and aio_context_release()") in 2014. It's with a
sigh of relief that I delete these APIs almost 10 years later.
Thanks to Paolo Bonzini's vision for multi-queue QEMU, we got an
understanding of where the code needed to go in order to remove the
limitations that the original dataplane and the IOThread/AioContext
approach that followed it.
Emanuele Giuseppe Esposito had the splendid determination to convert
large parts of the codebase so that they no longer needed the AioContext
lock. This was a painstaking process, both in the actual code changes
required and the iterations of code review that Emanuele eked out of
Kevin and me over many months.
Kevin Wolf tackled multitudes of graph locking conversions to protect
in-flight I/O from run-time changes to the block graph as well as the
clang Thread Safety Analysis annotations that allow the compiler to
check whether the graph lock is being used correctly.
And me, well, I'm just here to add some pizzazz to the QEMU multi-queue
block layer :). Thank you to everyone who helped with this effort,
including Eric Blake, code reviewer extraordinaire, and others who I've
forgotten to mention.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-11-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is the big patch that removes
aio_context_acquire()/aio_context_release() from the block layer and
affected block layer users.
There isn't a clean way to split this patch and the reviewers are likely
the same group of people, so I decided to do it in one patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-ID: <20231205182011.1976568-7-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stop acquiring/releasing the AioContext lock in
bdrv_graph_wrlock()/bdrv_graph_unlock() since the lock no longer has any
effect.
The distinction between bdrv_graph_wrunlock() and
bdrv_graph_wrunlock_ctx() becomes meaningless and they can be collapsed
into one function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231205182011.1976568-6-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
aio_context_acquire()/aio_context_release() has been replaced by
fine-grained locking to protect state shared by multiple threads. The
AioContext lock still plays the role of balancing locking in
AIO_WAIT_WHILE() and many functions in QEMU either require that the
AioContext lock is held or not held for this reason. In other words, the
AioContext lock is purely there for consistency with itself and serves
no real purpose anymore.
Stop actually acquiring/releasing the lock in
aio_context_acquire()/aio_context_release() so that subsequent patches
can remove callers across the codebase incrementally.
I have performed "make check" and qemu-iotests stress tests across
x86-64, ppc64le, and aarch64 to confirm that there are no failures as a
result of eliminating the lock.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231205182011.1976568-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the removal of AioContext locking, the correctness of the code
relies on running requests from a single AioContext at any given time.
Add assertions that verify that callbacks are invoked in the correct
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231205182011.1976568-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Protect the Task Management Function BH state with a lock. The TMF BH
runs in the main loop thread. An IOThread might process a TMF at the
same time as the TMF BH is running. Therefore tmf_bh_list and tmf_bh
must be protected by a lock.
Run TMF request completion in the IOThread using aio_wait_bh_oneshot().
This avoids more locking to protect the virtqueue and SCSI layer state.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231205182011.1976568-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit abfcd2760b ("dma-helpers: prevent dma_blk_cb() vs
dma_aio_cancel() race") acquired the AioContext lock inside dma_blk_cb()
to avoid a race with scsi_device_purge_requests() running in the main
loop thread.
The SCSI code no longer calls dma_aio_cancel() from the main loop thread
while I/O is running in the IOThread AioContext. Therefore it is no
longer necessary to take this lock to protect DMAAIOCB fields. The
->cb() function also does not require the lock because blk_aio_*() and
friends do not need the AioContext lock.
Both hw/ide/core.c and hw/ide/macio.c also call dma_blk_io() but don't
rely on it taking the AioContext lock, so this change is safe.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231204164259.1515217-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio_queue_aio_attach_host_notifier() does not require the AioContext
lock. Stop taking the lock and add an explicit smp_wmb() because we were
relying on the implicit barrier in the AioContext lock before.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231204164259.1515217-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stop depending on the AioContext lock and instead access
SCSIDevice->requests from only one thread at a time:
- When the VM is running only the BlockBackend's AioContext may access
the requests list.
- When the VM is stopped only the main loop may access the requests
list.
These constraints protect the requests list without the need for locking
in the I/O code path.
Note that multiple IOThreads are not supported yet because the code
assumes all SCSIRequests are executed from a single AioContext. Leave
that as future work.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231204164259.1515217-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have a few test cases that include tests for corner case aspects of
internal snapshots, but nothing that tests that they actually function
as snapshots or that involves deleting a snapshot. Add a test for this
kind of basic internal snapshot functionality.
The error cases include a regression test for the crash we just fixed
with snapshot operations on inactive images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, the conflict between -incoming and -loadvm is only detected
when loading the snapshot fails because the image is still inactive for
the incoming migration. This results in a suboptimal error message:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: Device 'ide0-hd0' is writable but does not support snapshots
Catch the situation already in qemu_validate_options() to improve the
message:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: 'incoming' and 'loadvm' options are mutually exclusive
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_read_only() only checks if the node is configured to be
read-only eventually, but even if it returns false, writing to the node
may not be permitted at the moment (because it's inactive).
bdrv_is_writable() checks that the node can be written to right now, and
this is what the snapshot operations really need.
Change bdrv_can_snapshot() to use bdrv_is_writable() to fix crashes like
the following:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: ../block/io.c:1990: int bdrv_co_write_req_prepare(BdrvChild *, int64_t, int64_t, BdrvTrackedRequest *, int): Assertion `!(bs->open_flags & BDRV_O_INACTIVE)' failed.
The resulting error message after this patch isn't perfect yet, but at
least it doesn't crash any more:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: Device 'ide0-hd0' is writable but does not support snapshots
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The file-posix block driver currently only sets up Linux AIO and
io_uring in the BDS's AioContext. In the multi-queue block layer we must
be able to submit I/O requests in AioContexts that do not have Linux AIO
and io_uring set up yet since any thread can call into the block driver.
Set up Linux AIO and io_uring for the current AioContext during request
submission. We lose the ability to return an error from
.bdrv_file_open() when Linux AIO and io_uring setup fails (e.g. due to
resource limits). Instead the user only gets warnings and we fall back
to aio=threads. This is still better than a fatal error after startup.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230914140101.1065008-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
NBDClient has a number of fields that are accessed by both the export
AioContext and the main loop thread. When the AioContext lock is removed
these fields will need another form of protection.
Add NBDClient->lock and protect fields that are accessed by both
threads. Also add assertions where possible and otherwise add doc
comments stating assumptions about which thread and lock holding.
Note this patch moves the client->recv_coroutine assertion from
nbd_co_receive_request() to nbd_trip() where client->lock is held.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231221192452.1785567-7-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The NBD clients list is currently accessed from both the export
AioContext and the main loop thread. When the AioContext lock is removed
there will be nothing protecting the clients list.
Adding a lock around the clients list is tricky because NBDClient
structs are refcounted and may be freed from the export AioContext or
the main loop thread. nbd_export_request_shutdown() -> client_close() ->
nbd_client_put() is also tricky because the list lock would be held
while indirectly dropping references to NDBClients.
A simpler approach is to only allow nbd_client_put() and client_close()
calls from the main loop thread. Then the NBD clients list is only
accessed from the main loop thread and no fancy locking is needed.
nbd_trip() just needs to reschedule itself in the main loop AioContext
before calling nbd_client_put() and client_close(). This costs more CPU
cycles per NBD request so add nbd_client_put_nonzero() to optimize the
common case where more references to NBDClient remain.
Note that nbd_client_get() can still be called from either thread, so
make NBDClient->refcount atomic.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231221192452.1785567-6-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
nbd_trip() processes a single NBD request from start to finish and holds
an NBDClient reference throughout. NBDRequest does not outlive the scope
of nbd_trip(). Therefore it is unnecessary to ref/unref NBDClient for
each NBDRequest.
Removing these nbd_client_get()/nbd_client_put() calls will make
thread-safety easier in the commits that follow.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20231221192452.1785567-5-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With LoongArch virt machine, there is low memory space with region
0--0x10000000, and high memory space with started from 0x90000000.
High memory space is aligned with 256M, it will be better if it is
aligned with 1G, which is super page aligned for 4K page size.
Currently linux kernel and uefi bios has no limitation with high
memory base address, it is ok to set high memory base address
with 0x80000000.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231127040231.4123715-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* Add compat machines for QEMU 9.0
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWCtYsRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWLnw//cNJrxG0V+j0iakX+C7HRumVrLBDI4KYY
# Cp2Hx92SyeQ0Kk8DJS6JueTV0SLjMsV77APu2YPH7ELmPlk+CB9gqmV7xVoYNvsm
# QbRPlIjFw8MHLekadc2A+C+pn48tWACoOdBEDIfazKrxybnf0B57RC/fIfMKHjbs
# 2ALCoFbbgphs7yWuzTHK8ayKaGMhUVkWfzHQwpnq899olHyZBhkl951uKJA6VmLx
# KvggePkpszLjmmXA8MH1hDCcizki31cB0ZKTbQFCyE42s2S3Hvg0GueU90O7Y1cj
# lS5tPVQxyEhUYMLL+/hudlf2OYqVn2BalB7ieUQIy6rG8yoc9zxfIKQi0ccl+2oA
# s8HRq5S0bSjtilQogU1LQL/Gk6W1/N9MmnhKvCGB+BTK5KX7s4EQk02y9gGZm/8s
# pMErMyaXTG4dLiTAK42VgMVDqCYvzBmE+Gj91OmoUR7fb+VMrsWxeBFxMPDn+VtL
# TMJegIFsjw2QCSitcU4v+nP0qtKgXGbuZtrGXKabrxH5PmeQFJDSM7TwpTK4qvjK
# QMIQKBbz8BfJnUzN8qAaaJEpp1T5tcMJClKtfcgxq/+VyaSaHLmD0cljqBC+g+y7
# FTo+fa7oYx44sAlqapdEXBSGn4T+J26iuCef13CCCiPfYBv/tk3b2E0AWHj4y58I
# +VpInjUaPBQ=
# =TA1/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Dec 2023 04:36:11 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu:
tests/unit/test-qmp-event: Replace fixture by global variables
tests/unit/test-qmp-event: Simplify event emission check
tests/unit/test-qmp-event: Drop superfluous mutex
tests/qtest/npcm7xx_pwm-test: Only do full testing in slow mode
qemu-options: Clarify handling of commas in options parameters
tests/qtest/migration-test: Fix analyze-migration.py for s390x
qom/object: Limit type names to alphanumerical and some few special characters
tests/unit/test-io-task: Rename "qemu:dummy" to avoid colon in the name
memory: Remove "qemu:" prefix from the "qemu:ram-discard-manager" type name
hw: Replace anti-social QOM type names (again)
docs/system/arm: Fix for rename of type "xlnx.bbram-ctrl"
target: Restrict 'sysemu/reset.h' to system emulation
hw/s390x/ipl: Remove unused 'exec/exec-all.h' included header
hw/misc/mips_itu: Remove unnecessary 'exec/exec-all.h' header
hw/ppc/spapr_hcall: Remove unused 'exec/exec-all.h' included header
system/qtest: Restrict QTest API to system emulation
system/qtest: Include missing 'hw/core/cpu.h' header
MAINTAINERS: Add some more vmware-related files to the corresponding section
hw: Add compat machines for 9.0
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
target-arm queue:
* arm/kvm: drop the split between "common KVM support" and
"64-bit KVM support", since 32-bit Arm KVM no longer exists
* arm/kvm: clean up APIs to be consistent about CPU arguments
* Don't implement *32_EL2 registers when EL1 is AArch64 only
* Restrict DC CVAP & DC CVADP instructions to TCG accel
* Restrict TCG specific helpers
* Propagate MDCR_EL2.HPMN into PMCR_EL0.N
* Include missing 'exec/exec-all.h' header
* fsl-imx: add simple RTC emulation for i.MX6 and i.MX7 boards
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmWB6o0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3mxMEACRpRxJ81pLs8fFYC5BgRhU
# BCxr+ZqarBygzsH9YWUN2TFFKlEZi7mLu6lzFsfN/qEmYCg8VslPbulQHqcGkx51
# kVxXFp/KuGlKt4zGRagZUJxgYAwwU5mnK6dTZT5/ZF6yWX67dXn8V7MP9lqqEPw5
# 5gut7Mu4f7MiAQbwZY1CWP+iu5uZmdsBuKxA6zkxOWJh/A1SfaqQRO6xVQttLAxS
# DPMTpQGmwPS4I+3gGNnqlSu6etp2tdy2K0cW3fhMp6hx70uNMHmFNzRhT/6TaKka
# 9AqXQsFHQiFXDGAm6PmCvfQI6KpLljDyNL/TuUkQWi72bGEHjUsJAdG0aXVOa30W
# uC7vuJkdZrP/t5P1AkZhWQUrlawDRV2YHNDD+gY4fxJL/STkGyU6M8R1nm1J+InN
# n0SeK0VHRC6DRPXCMQhC5QwKUH6ZjFZRs/r2opTu9p+ThQAQRmZBiVfdISCDMYnN
# DCiSb78gIFaUkwtiP44qq8MJQjsHnXtTD1Akqyo2fXSKs66jDK9Gnc8gENYdpghe
# 7V36bOp6scROHOB2a/r8gT42RKzSN6uh6xByaaToza63/bPgvHnn8vvQQbB01AgX
# zJC1xs3dwY8JMyqDefda0K0NDPS8TzNsXYmgxxxcQJpUvB4VVjet9VIMF3T+d8HO
# Pas41Z1gsQY+rcaRk/9mPA==
# =GWIA
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Dec 2023 14:10:05 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20231219' of https://git.linaro.org/people/pmaydell/qemu-arm: (43 commits)
fsl-imx: add simple RTC emulation for i.MX6 and i.MX7 boards
target/arm/helper: Propagate MDCR_EL2.HPMN into PMCR_EL0.N
target/arm/tcg: Including missing 'exec/exec-all.h' header
target/arm: Restrict DC CVAP & DC CVADP instructions to TCG accel
target/arm: Restrict TCG specific helpers
target/arm: Don't implement *32_EL2 registers when EL1 is AArch64 only
target/arm/kvm: Have kvm_arm_hw_debug_active take a ARMCPU argument
target/arm/kvm: Have kvm_arm_handle_debug take a ARMCPU argument
target/arm/kvm: Have kvm_arm_handle_dabt_nisv take a ARMCPU argument
target/arm/kvm: Have kvm_arm_verify_ext_dabt_pending take a ARMCPU arg
target/arm/kvm: Have kvm_arm_[get|put]_virtual_time take ARMCPU argument
target/arm/kvm: Have kvm_arm_vcpu_finalize take a ARMCPU argument
target/arm/kvm: Have kvm_arm_vcpu_init take a ARMCPU argument
target/arm/kvm: Have kvm_arm_pmu_set_irq take a ARMCPU argument
target/arm/kvm: Have kvm_arm_pmu_init take a ARMCPU argument
target/arm/kvm: Have kvm_arm_pvtime_init take a ARMCPU argument
target/arm/kvm: Have kvm_arm_set_device_attr take a ARMCPU argument
target/arm/kvm: Have kvm_arm_sve_get_vls take a ARMCPU argument
target/arm/kvm: Have kvm_arm_sve_set_vls take a ARMCPU argument
target/arm/kvm: Have kvm_arm_add_vcpu_properties take a ARMCPU argument
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vfio queue:
* Introduce an IOMMU interface backend for VFIO devices
* Convert IOMMU type1 and sPAPR IOMMU to respective backends
* Introduce a new IOMMUFD backend for ARM, x86_64 and s390x platforms
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmWB34AACgkQUaNDx8/7
# 7KGOMxAAqXegvAneHqIlu4c8TzTuUR2rkYgev9RdfIHRDuY2XtaX14xlWn/rpTXZ
# qSgeta+iT8Cv4YV1POJeHWFDNs9E29p1w+R7nLcH1qTIIaZHtxwbVVQ3s7kAo1Vb
# 1S1G0/zIznzGVI50a0lj1gO2yQJnu/79nXpnICgA5REW0CscMssnvboQODlwq17V
# ZLNVM8CSAvKl6ppkmzRdfNXCfq6x7bf4MsvnuXsqda4TBbvyyTjAqdo/8sjKiGly
# gSDQqhgy6cvEXIF0UUHPJzFApf0YdXUDlL8hzH90hvRVu4W/t24dPmT7UkVIX9Ek
# TA7RVxv7iJlHtFDqfSTAJFr7nKO9Tm2V9N7xbD1OJUKrMoPZRT6+0R1hMKqsZ5z+
# nG6khqHGzuo/aI9n70YxYIPXt+vs/EHI4WUtslGLUTL0xv8lUzk6cxyIJupFRmDS
# ix6GM9TXOV8RyOveL2knHVymlFnAR6dekkMB+6ljUTuzDwG0oco4vno8z9bi7Vct
# j36bM56U3lhY+w+Ljoy0gPwgrw/FROnGG3mp1mwp1KRHqtEDnUQu8CaLbJOBsBGE
# JJDP6AKAYMczdmYVkd4CvE0WaeSxtOUxW5H5NCPjtaFQt0qEcght2lA2K15g521q
# jeojoJ/QK5949jnNCqm1Z66/YQVL79lPyL0E+mxEohwu+yTORk4=
# =U0x5
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Dec 2023 13:22:56 EST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20231219' of https://github.com/legoater/qemu: (47 commits)
hw/ppc/Kconfig: Imply VFIO_PCI
docs/devel: Add VFIO iommufd backend documentation
vfio: Introduce a helper function to initialize VFIODevice
vfio/ccw: Move VFIODevice initializations in vfio_ccw_instance_init
vfio/ap: Move VFIODevice initializations in vfio_ap_instance_init
vfio/platform: Move VFIODevice initializations in vfio_platform_instance_init
vfio/pci: Move VFIODevice initializations in vfio_instance_init
hw/i386: Activate IOMMUFD for q35 machines
kconfig: Activate IOMMUFD for s390x machines
hw/arm: Activate IOMMUFD for virt machines
vfio: Make VFIOContainerBase poiner parameter const in VFIOIOMMUOps callbacks
vfio/ccw: Make vfio cdev pre-openable by passing a file handle
vfio/ccw: Allow the selection of a given iommu backend
vfio/ap: Make vfio cdev pre-openable by passing a file handle
vfio/ap: Allow the selection of a given iommu backend
vfio/platform: Make vfio cdev pre-openable by passing a file handle
vfio/platform: Allow the selection of a given iommu backend
vfio/pci: Make vfio cdev pre-openable by passing a file handle
vfio/pci: Allow the selection of a given iommu backend
vfio/iommufd: Enable pci hot reset through iommufd cdev interface
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The generated qapi_event_send_FOO() call an event emitter function.
It's test_qapi_event_emit() in this test. It compares the actual
event to the expected event, and sets a flag to record it was called.
The test functions set expected data and clear the flag before calling
qapi_event_send_FOO(), and check the flag afterwards.
Make test_qapi_event_emit() consume expected data, and the test
functions check it was consumed. Delete the flag. This is simpler.
It also catches extraneous calls of test_qapi_event_emit(). Catching
that is not worthwhile, but since the cost is negative...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231122072456.2518816-3-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mutex @test_event_lock is held from fixture setup to teardown,
protecting global variable @test_event_data. But tests always run one
after the other, so this is superfluous. It also confuses Coverity.
Drop the mutex.
Fixes: CID 1527425
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231122072456.2518816-2-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The npcm7xx_pwm-test can take quite a while when running with
--enable-debug on a loaded system. The tests here are quite
repetitive - by default it should be fine if we only execute
some of them and only execute all when running in slow testing mode.
Message-ID: <20231215143524.49241-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The migration stream on s390x contains data for the storage_attributes
which the analyze-migration.py cannot handle yet. Add the basic code
for handling this, so we can re-enable the check in the migration-test.
Message-ID: <20231120113951.162090-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QOM names currently don't have any enforced naming rules. This
can be problematic, e.g. when they are used on the command line
for the "-device" option (where the comma is used to separate
properties). To avoid that such problematic type names come in
again, let's restrict the set of acceptable characters during the
type registration.
Ideally, we'd apply here the same rules as for QAPI, i.e. all type
names should begin with a letter, and contain only ASCII letters,
digits, hyphen, and underscore. However, we already have so many
pre-existing types like:
486-x86_64-cpu
cfi.pflash01
power5+_v2.1-spapr-cpu-core
virt-2.6-machine
pc-i440fx-3.0-machine
... so that we have to allow "." and "+" for now, too. While the
dot is used in a lot of places, the "+" can fortunately be limited
to two classes of legacy names ("power" and "Sun-UltraSparc" CPUs).
We also cannot enforce the rule that names must start with a letter
yet, since there are lot of types that start with a digit. Still,
at least limiting the first characters to the alphanumerical range
should be way better than nothing.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231117114457.177308-6-thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Type names should not contain special characters like ":" (so that
they are easier to use with QAPI and other parts). We are going to
forbid such names in an upcoming patch. Thus let's replace the ":"
here with a "-".
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231117114457.177308-5-thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Type names should not contain special characters like ":". Let's
remove the whole prefix here since it does not really seem to be
helpful to have such a prefix here. The type name is only used
internally for an interface type, so the renaming should not affect
the user interface or migration.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231117114457.177308-4-thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QOM type names containing ',' result in awful UI. We got rid of them
in v6.0.0 (commit e178113ff6 hw: Replace anti-social QOM type names).
A few have crept back since:
xlnx,cframe-reg
xlnx,efuse
xlnx,pmc-efuse-cache
xlnx,versal-cfu-apb
xlnx,versal-cfu-fdro
xlnx,versal-cfu-sfr
xlnx,versal-crl
xlnx,versal-efuse
xlnx,zynqmp-efuse
These are all device types. They can't be plugged with -device /
device_add, except for "xlnx,efuse" (I'm not sure that one is
intentional).
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-aarch64 -device xlnx,,pmc-efuse-cache,help
They can also be used with -global, where you must *not* double the
comma:
$ qemu-system-aarch64 -global xlnx,efuse.drive-index=2
Trap for the unwary.
"xlnx,efuse", "xlnx,versal-efuse", "xlnx,pmc-efuse-cache",
"xlnx-zynqmp-efuse" are from v6.2.0, "xlnx,versal-crl" is from v7.1.0,
and the remainder are new.
Rename them all to "xlnx-FOO", like commit e178113ff6 did.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-ID: <20231117114457.177308-3-thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"hw/core/cpu.h" declares 'first_cpu'. Include it to avoid
when unrelated headers are refactored:
system/qtest.c:548:33: error: use of undeclared identifier 'first_cpu'
address_space_write(first_cpu->as, addr, MEMTXATTRS_UNSPECIFIED,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231212113016.29808-2-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the legacy and iommufd backends were introduced, a set of common
vfio-pci routines were exported in pci.c for both backends to use :
vfio_pci_pre_reset
vfio_pci_get_pci_hot_reset_info
vfio_pci_host_match
vfio_pci_post_reset
This introduced a build failure on PPC when --without-default-devices
is use because VFIO is always selected in ppc/Kconfig but VFIO_PCI is
not.
Use an 'imply VFIO_PCI' in ppc/Kconfig and bypass compilation of the
VFIO EEH hooks routines defined in hw/ppc/spapr_pci_vfio.c with
CONFIG_VFIO_PCI.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce a helper function to replace the common code to initialize
VFIODevice in pci, platform, ap and ccw VFIO device.
No functional change intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Some of the VFIODevice initializations is in vfio_ccw_realize,
move all of them in vfio_ccw_instance_init.
No functional change intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Some of the VFIODevice initializations is in vfio_ap_realize,
move all of them in vfio_ap_instance_init.
No functional change intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Some of the VFIODevice initializations is in vfio_platform_realize,
move all of them in vfio_platform_instance_init.
No functional change intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Some of the VFIODevice initializations is in vfio_realize,
move all of them in vfio_instance_init.
No functional change intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Some of the callbacks in VFIOIOMMUOps pass VFIOContainerBase poiner,
those callbacks only need read access to the sub object of VFIOContainerBase.
So make VFIOContainerBase, VFIOContainer and VFIOIOMMUFDContainer as const
in these callbacks.
Local functions called by those callbacks also need same changes to avoid
build error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This gives management tools like libvirt a chance to open the vfio
cdev with privilege and pass FD to qemu. This way qemu never needs
to have privilege to open a VFIO or iommu cdev node.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Now we support two types of iommu backends, let's add the capability
to select one of them. This depends on whether an iommufd object has
been linked with the vfio-ccw device:
If the user wants to use the legacy backend, it shall not
link the vfio-ccw device with any iommufd object:
-device vfio-ccw,sysfsdev=/sys/bus/mdev/devices/XXX
This is called the legacy mode/backend.
If the user wants to use the iommufd backend (/dev/iommu) it
shall pass an iommufd object id in the vfio-ccw device options:
-object iommufd,id=iommufd0
-device vfio-ccw,sysfsdev=/sys/bus/mdev/devices/XXX,iommufd=iommufd0
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This gives management tools like libvirt a chance to open the vfio
cdev with privilege and pass FD to qemu. This way qemu never needs
to have privilege to open a VFIO or iommu cdev node.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Now we support two types of iommu backends, let's add the capability
to select one of them. This depends on whether an iommufd object has
been linked with the vfio-ap device:
if the user wants to use the legacy backend, it shall not
link the vfio-ap device with any iommufd object:
-device vfio-ap,sysfsdev=/sys/bus/mdev/devices/XXX
This is called the legacy mode/backend.
If the user wants to use the iommufd backend (/dev/iommu) it
shall pass an iommufd object id in the vfio-ap device options:
-object iommufd,id=iommufd0
-device vfio-ap,sysfsdev=/sys/bus/mdev/devices/XXX,iommufd=iommufd0
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This gives management tools like libvirt a chance to open the vfio
cdev with privilege and pass FD to qemu. This way qemu never needs
to have privilege to open a VFIO or iommu cdev node.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Now we support two types of iommu backends, let's add the capability
to select one of them. This depends on whether an iommufd object has
been linked with the vfio-platform device:
If the user wants to use the legacy backend, it shall not
link the vfio-platform device with any iommufd object:
-device vfio-platform,host=XXX
This is called the legacy mode/backend.
If the user wants to use the iommufd backend (/dev/iommu) it
shall pass an iommufd object id in the vfio-platform device options:
-object iommufd,id=iommufd0
-device vfio-platform,host=XXX,iommufd=iommufd0
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This gives management tools like libvirt a chance to open the vfio
cdev with privilege and pass FD to qemu. This way qemu never needs
to have privilege to open a VFIO or iommu cdev node.
Together with the earlier support of pre-opening /dev/iommu device,
now we have full support of passing a vfio device to unprivileged
qemu by management tool. This mode is no more considered for the
legacy backend. So let's remove the "TODO" comment.
Add helper functions vfio_device_set_fd() and vfio_device_get_name()
to set fd and get device name, they will also be used by other vfio
devices.
There is no easy way to check if a device is mdev with FD passing,
so fail the x-balloon-allowed check unconditionally in this case.
There is also no easy way to get BDF as name with FD passing, so
we fake a name by VFIO_FD[fd].
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Now we support two types of iommu backends, let's add the capability
to select one of them. This depends on whether an iommufd object has
been linked with the vfio-pci device:
If the user wants to use the legacy backend, it shall not
link the vfio-pci device with any iommufd object:
-device vfio-pci,host=0000:02:00.0
This is called the legacy mode/backend.
If the user wants to use the iommufd backend (/dev/iommu) it
shall pass an iommufd object id in the vfio-pci device options:
-object iommufd,id=iommufd0
-device vfio-pci,host=0000:02:00.0,iommufd=iommufd0
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Legacy vfio pci and iommufd cdev have different process to hot reset
vfio device, expand current code to abstract out pci_hot_reset callback
for legacy vfio, this same interface will also be used by iommufd
cdev vfio device.
Rename vfio_pci_hot_reset to vfio_legacy_pci_hot_reset and move it
into container.c.
vfio_pci_[pre/post]_reset and vfio_pci_host_match are exported so
they could be called in legacy and iommufd pci_hot_reset callback.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Some vIOMMU such as virtio-iommu use IOVA ranges from host side to
setup reserved ranges for passthrough device, so that guest will not
use an IOVA range beyond host support.
Use an uAPI of IOMMUFD to get IOVA ranges of host side and pass to
vIOMMU just like the legacy backend, if this fails, fallback to
64bit IOVA range.
Also use out_iova_alignment returned from uAPI as pgsizes instead of
qemu_real_host_page_size() as a fallback.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently iommufd doesn't support dirty page sync yet,
but it will not block us doing live migration if VFIO
migration is force enabled.
So in this case we allow set_dirty_page_tracking to be NULL.
Note we don't need same change for query_dirty_bitmap because
when dirty page sync isn't supported, query_dirty_bitmap will
never be called.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The iommufd backend is implemented based on the new /dev/iommu user API.
This backend obviously depends on CONFIG_IOMMUFD.
So far, the iommufd backend doesn't support dirty page sync yet.
Co-authored-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This is a trivial optimization. If there is active container in space,
vfio_reset_handler will never be unregistered. So revert the check of
space->containers and return early.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce an iommufd object which allows the interaction
with the host /dev/iommu device.
The /dev/iommu can have been already pre-opened outside of qemu,
in which case the fd can be passed directly along with the
iommufd object:
This allows the iommufd object to be shared accross several
subsystems (VFIO, VDPA, ...). For example, libvirt would open
the /dev/iommu once.
If no fd is passed along with the iommufd object, the /dev/iommu
is opened by the qemu code.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce an empty spapr backend which will hold spapr specific
content, currently only prereg_listener and hostwin_list.
Also introduce two spapr specific callbacks add/del_window into
VFIOIOMMUOps. Instantiate a spapr ops with a helper setup_spapr_ops
and assign it to bcontainer->ops.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Meanwhile remove the helper function vfio_free_container as it
only calls g_free now.
No functional change intended.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In the prospect to get rid of VFIOContainer refs
in common.c lets convert misc functions to use the base
container object instead:
vfio_devices_all_dirty_tracking
vfio_devices_all_device_dirty_tracking
vfio_devices_all_running_and_mig_active
vfio_devices_query_dirty_bitmap
vfio_get_dirty_bitmap
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIO Device is also changed to point to base container instead of
legacy container.
No functional change intended.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This adds two helper functions vfio_container_init/destroy which will be
used by both legacy and iommufd containers to do base container specific
initialization and release.
No functional change intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This empty VFIOIOMMUOps named vfio_legacy_ops will hold all general
IOMMU ops of legacy container.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce a dumb VFIOContainerBase object and its targeted interface.
This is willingly not a QOM object because we don't want it to be
visible from the user interface. The VFIOContainerBase will be
smoothly populated in subsequent patches as well as interfaces.
No functional change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The system registers DBGVCR32_EL2, FPEXC32_EL2, DACR32_EL2 and
IFSR32_EL2 are present only to allow an AArch64 EL2 or EL3 to read
and write the contents of an AArch32-only system register. The
architecture requires that they are present only when EL1 can be
AArch32, but we implement them unconditionally. This was OK when all
our CPUs supported AArch32 EL1, but we have quite a lot of CPU models
now which only support AArch64 at EL1:
a64fx
cortex-a76
cortex-a710
neoverse-n1
neoverse-n2
neoverse-v1
Only define these registers for CPUs which allow AArch32 EL1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231121144605.3980419-1-peter.maydell@linaro.org
Drop fprintfs and actually use the return values in the callers.
This is OK to do since commit 7191f24c7f which added the
error-check to the generic accel/kvm functions that eventually
call into these ones.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: tweak commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since kvm32.c was removed, there is no need to keep them separate.
This will allow more symbols to be unexported.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: retain copyright lines from kvm64.c in kvm.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 32-bit mode, pc = eip + cs_base is also 32-bit, and must wrap.
Failure to do so results in incorrect memory exceptions to the guest.
Before 732d548732, this was implicitly done via truncation to
target_ulong but only in qemu-system-i386, not qemu-system-x86_64.
To fix this, we must add conditional zero-extensions.
Since we have to test for 32 vs 64-bit anyway, note that cs_base
is always zero in 64-bit mode.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2022
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231212172510.103305-1-richard.henderson@linaro.org>
I noticed the code blocks where not rendering properly so thought I'd
better fix things up. So:
- Use better title for the machine type
- Explain why Xen is a little different
- Add a proper anchor to the tpm-device link
- add newline so code block properly renders
- add some indentation to make continuation clearer
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231207130623.360473-1-alex.bennee@linaro.org>
GUEST_VIRTIO_MMIO_* was added in Xen 4.17, so only define them
for CONFIG_XEN_CTRL_INTERFACE_VERSIONs up to 4.16.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A misspelled condition in xen_native.h is hiding a bug in the enablement of
Xen for qemu-system-aarch64. The bug becomes apparent when building for
Xen 4.18.
While the i386 emulator provides the xenpv machine type for multiple architectures,
and therefore can be compiled with Xen enabled even when the host is Arm, the
opposite is not true: qemu-system-aarch64 can only be compiled with Xen support
enabled when the host is Arm.
Expand the computation of accelerator_targets['CONFIG_XEN'] similar to what is
already there for KVM.
Cc: Stefano Stabellini <stefano.stabellini@amd.com>
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reported-by: Michael Young <m.a.young@durham.ac.uk>
Fixes: 0c8ab1cddd ("xen_arm: Create virtio-mmio devices during initialization", 2023-08-30)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 7191f24c7f ("accel/kvm/kvm-all: Handle register access errors")
added error checking for KVM_SET_SREGS/KVM_SET_SREGS2. In doing so, it
exposed a long-running bug in current KVM support for SEV-ES where the
kernel assumes that MSR_EFER_LMA will be set explicitly by the guest
kernel, in which case EFER write traps would result in KVM eventually
seeing MSR_EFER_LMA get set and recording it in such a way that it would
be subsequently visible when accessing it via KVM_GET_SREGS/etc.
However, guest kernels currently rely on MSR_EFER_LMA getting set
automatically when MSR_EFER_LME is set and paging is enabled via
CR0_PG_MASK. As a result, the EFER write traps don't actually expose the
MSR_EFER_LMA bit, even though it is set internally, and when QEMU
subsequently tries to pass this EFER value back to KVM via
KVM_SET_SREGS* it will fail various sanity checks and return -EINVAL,
which is now considered fatal due to the aforementioned QEMU commit.
This can be addressed by inferring the MSR_EFER_LMA bit being set when
paging is enabled and MSR_EFER_LME is set, and synthesizing it to ensure
the expected bits are all present in subsequent handling on the host
side.
Ultimately, this handling will be implemented in the host kernel, but to
avoid breaking QEMU's SEV-ES support when using older host kernels, the
same handling can be done in QEMU just after fetching the register
values via KVM_GET_SREGS*. Implement that here.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Lara Lazier <laramglazier@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: <kvm@vger.kernel.org>
Fixes: 7191f24c7f ("accel/kvm/kvm-all: Handle register access errors")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231206155821.1194551-1-michael.roth@amd.com>
ufs fixes for 8.2
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmVurjcACgkQEuIgTA5d
# tgLWVBAAkzus4nN2+Z0H23VUmeBPCLPFXRSkK8mOWC3ymbX3kiy/IjgM7Ept6QWA
# btssTf3YEeDtycgbrb5GZ4kEfKThDN7bbGRHvCW5bjwkyLQN1Ys2K61CTRX0VhSi
# U4HDE3gCm+LpO28BuV/1KunlSH4TWjt76AB6YG5PuyzSH+AbC8yY7m+VSJTmCw1k
# cZv0TQ+9lqWc4C6ziETV8UqhhltBmd/57P3xFDKhYNl0EtzxnKGSZ2szzWqE7guY
# DsmTlfB5bnkYPE51xxTcJnRj907utNrIfa2kbu9wXU/GuPuEf9QkDo1Dt3t1Z0Zm
# OZPkloXC2eNufVcGYVJa2PylRjwFlg01IuhYmlhsgerg5LZz2RIyrWM61JTONF2J
# 6EvO89e2S3XpBbnl2ugf2rMIdW1tlLSWhnLZD+jZzOu+V2TeLm6/onHWCVQ02sLr
# ddDVpf2djvUsmRvcBBYlI40FcC9Wt828Spm+wkRsGHC+VbAg2al6jRNXyJ2LWeiS
# wGsAwRV6XhQz996uMOWTA7jEsAawHUFgYCsH4bgiqiWEn+FblufY2iicRxY4ZsJA
# GXpvxGoUHWE8e0XjXG1BnRFo2Q5ns9SRl5gx5X7rcmIKUGGCh3ZI72zfeVgCjm7b
# 5/CV/YzKuCRWJCYcORguli1GVuPO01FJrBloTJc0OSaDAtZL2Mg=
# =o2kr
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Dec 2023 23:59:35 EST
# gpg: using RSA key 5017D831597C78A3D907EEF712E2204C0E5DB602
# gpg: Good signature from "Jeuk Kim <jeuk20.kim@samsung.com>" [unknown]
# gpg: aka "Jeuk Kim <jeuk20.kim@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5017 D831 597C 78A3 D907 EEF7 12E2 204C 0E5D B602
* tag 'pull-ufs-20231205' of https://gitlab.com/jeuk20.kim/qemu:
hw/ufs: avoid generating the same ID string for different LU devices
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU would not start when trying to create two UFS host controllers and
a UFS logical unit for each with the following options:
-device ufs,id=bus0 \
-device ufs-lu,drive=drive1,bus=bus0,lun=0 \
-device ufs,id=bus1 \
-device ufs-lu,drive=drive2,bus=bus1,lun=0 \
This is because the same ID string ("0:0:0/scsi-disk") is generated
for both UFS logical units.
To fix this issue, prepend the parent pci device's path to make
the ID string unique.
("0000:00:03.0/0:0:0/scsi-disk" and "0000:00:04.0/0:0:0/scsi-disk")
Resolves: #2018
Fixes: 096434fea1 ("hw/ufs: Modify lu.c to share codes with SCSI subsystem")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231204150543.48252-1-akinobu.mita@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
KVM_RISCV_GET_CSR() and KVM_RISCV_SET_CSR() use an 'int ret' variable
that is used to do an early 'return' if ret > 0. Both are being called
in functions that are also declaring a 'ret' integer, initialized with
'0', and this integer is used as return of the function.
The result is that the compiler is less than pleased and is pointing
shadowing errors:
../target/riscv/kvm/kvm-cpu.c: In function 'kvm_riscv_get_regs_csr':
../target/riscv/kvm/kvm-cpu.c:90:13: error: declaration of 'ret' shadows a previous local [-Werror=shadow=compatible-local]
90 | int ret = kvm_get_one_reg(cs, RISCV_CSR_REG(env, csr), ®); \
| ^~~
../target/riscv/kvm/kvm-cpu.c:539:5: note: in expansion of macro 'KVM_RISCV_GET_CSR'
539 | KVM_RISCV_GET_CSR(cs, env, sstatus, env->mstatus);
| ^~~~~~~~~~~~~~~~~
../target/riscv/kvm/kvm-cpu.c:536:9: note: shadowed declaration is here
536 | int ret = 0;
| ^~~
../target/riscv/kvm/kvm-cpu.c: In function 'kvm_riscv_put_regs_csr':
../target/riscv/kvm/kvm-cpu.c:98:13: error: declaration of 'ret' shadows a previous local [-Werror=shadow=compatible-local]
98 | int ret = kvm_set_one_reg(cs, RISCV_CSR_REG(env, csr), ®); \
| ^~~
../target/riscv/kvm/kvm-cpu.c:556:5: note: in expansion of macro 'KVM_RISCV_SET_CSR'
556 | KVM_RISCV_SET_CSR(cs, env, sstatus, env->mstatus);
| ^~~~~~~~~~~~~~~~~
../target/riscv/kvm/kvm-cpu.c:553:9: note: shadowed declaration is here
553 | int ret = 0;
| ^~~
The macros are doing early returns for non-zero returns and the local
'ret' variable for both functions is used just to do 'return 0', so
remove them from kvm_riscv_get_regs_csr() and kvm_riscv_put_regs_csr()
and do a straight 'return 0' in the end.
For good measure let's also rename the 'ret' variables in
KVM_RISCV_GET_CSR() and KVM_RISCV_SET_CSR() to '_ret' to make them more
resilient to these kind of errors.
Fixes: 937f0b4512 ("target/riscv: Implement kvm_arch_get_registers")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231123101338.1040134-1-dbarboza@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There is no architectural requirement that SME implies SVE, but
our implementation currently assumes it. (FEAT_SME_FA64 does
imply SVE.) So if you try to run a CPU with eg "-cpu max,sve=off"
you quickly run into an assert when the guest tries to write to
SMCR_EL1:
#6 0x00007ffff4b38e96 in __GI___assert_fail
(assertion=0x5555566e69cb "sm", file=0x5555566e5b24 "../../target/arm/helper.c", line=6865, function=0x5555566e82f0 <__PRETTY_FUNCTION__.31> "sve_vqm1_for_el_sm") at ./assert/assert.c:101
#7 0x0000555555ee33aa in sve_vqm1_for_el_sm (env=0x555557d291f0, el=2, sm=false) at ../../target/arm/helper.c:6865
#8 0x0000555555ee3407 in sve_vqm1_for_el (env=0x555557d291f0, el=2) at ../../target/arm/helper.c:6871
#9 0x0000555555ee3724 in smcr_write (env=0x555557d291f0, ri=0x555557da23b0, value=2147483663) at ../../target/arm/helper.c:6995
#10 0x0000555555fd1dba in helper_set_cp_reg64 (env=0x555557d291f0, rip=0x555557da23b0, value=2147483663) at ../../target/arm/tcg/op_helper.c:839
#11 0x00007fff60056781 in code_gen_buffer ()
Avoid this unsupported and slightly odd combination by
disabling SME when SVE is not present.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2005
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231127173318.674758-1-peter.maydell@linaro.org
Flaky avocado tests, gdbstub and gitlab tweaks
- gdbstub, properly halt when QEMU is having IO issues
- convert skipIf(GITLAB_CI) to skipUnless(QEMU_TEST_FLAKY_TESTS)
- tag sbsa-ref tests as TCG only
- build the correct microblaze for avocado-system-ubuntu
- add optional flaky tests job to CI
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVqHFgACgkQ+9DbCVqe
# KkQHLwgAjP2iL5LSa3FaMUoESJQqRB0rpoJ80gtEtmvmgRF0fHsRfHtDdMN9h2Ed
# YilCDhMKLyr2ZoK4atyuc5SR6vCXI5RAvfTddex0xSxlvBX5Z5+1FMC6yA8SDJM7
# ezEXACEKHiGv+l8gvOZOf9ZYEgh8DMJYFMbrtxuxKWw/kAjZ3R3X/ChCL94ZCPRe
# 486wqPIQfp5EPs2ddsW4DYFTjLpK5ImX+u/5kdaEGXwcg8UoLmQ9BVIrN/hYJ6u5
# t/mAp1qVIQwSOSUBnerQ4ZkVQfCgLtEtiDtt8EZjUbQD3DcLjfHFjTwVlpqcC1zs
# wHXYpLbD5jkthqav5E0DObCF9gIZdA==
# =qtvU
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Dec 2023 12:48:08 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-more-8.2-fixes-011223-2' of https://gitlab.com/stsquad/qemu:
gitlab: add optional job to run flaky avocado tests
gitlab: build the correct microblaze target
tests/avocado: tag sbsa tests as tcg only
docs/devel: rationalise unstable gitlab tests under FLAKY_TESTS
gdbstub: use a better signal when we halt for IO reasons
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-sound device is currently not migratable. QEMU crashes
on the source machine at some point during the migration with a
segmentation fault.
Even with this bug fixed, the virtio-sound device doesn't migrate
the state of the audio streams. For example, running streams leave
the device on the destination machine in a broken condition.
Mark the device as unmigratable until these issues have been fixed.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231204072837.6058-1-vr_qemu@t-online.de>
Commit d921fea338 ("ui/vnc-clipboard: fix infinite loop in
inflate_buffer (CVE-2023-3255)") removed this hunk, but it is still
required, because it can happen that stream.avail_in becomes zero
before coming across a return value of Z_STREAM_END in the loop.
This fixes the host->guest direction of the clipboard with noVNC and
TigerVNC as clients.
Fixes: d921fea338 ("ui/vnc-clipboard: fix infinite loop in inflate_buffer (CVE-2023-3255)")
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231122125826.228189-1-f.ebner@proxmox.com>
Commit 6f189a08c1 ("ui/gtk-egl: Check EGLSurface before doing
scanout") introduced a regression when QEMU is running with a
virtio-gpu-gl-device on a host under X11. After the guest has
initialized the virtio-gpu-gl-device, the guest screen only
shows "Display output is not active.".
Commit 6f189a08c1 moved all function calls in
gd_egl_scanout_texture() to a code path which is only called
once after gd_egl_init() succeeds in gd_egl_scanout_texture().
Move all function calls in gd_egl_scanout_texture() back to
the regular code path so they get always called if one of the
gd_egl_init() calls was successful.
Fixes: 6f189a08c1 ("ui/gtk-egl: Check EGLSurface before doing scanout")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231111104020.26183-1-vr_qemu@t-online.de>
The code already checks iommu_mr is not NULL so there is no
need to check container_of() is not NULL. Remove the check.
Fixes: CID 1523901
Fixes: 09b4c3d6a2 ("virtio-iommu: Record whether a probe request has
been issued")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Coverity (CID 1523901)
Message-Id: <20231109170715.259520-1-eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`kvm_enabled()` is compiled down to `0` and short-circuit logic is
used to remove references to undefined symbols at the compile stage.
Some build configurations with some compilers don't attempt to
simplify this logic down in some cases (the pattern appears to be
that the literal false must be the first term) and this was causing
some builds to emit references to undefined symbols.
An example of such a configuration is clang 16.0.6 with the following
configure: ./configure --enable-debug --without-default-features
--target-list=x86_64-softmmu --enable-tcg-interpreter
Signed-off-by: Daniel Hoffman <dhoff749@gmail.com>
Message-Id: <20231119203116.3027230-1-dhoff749@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
erst_realizefn() passes @errp to functions without checking for
failure. If it runs into another failure, it trips error_setv()'s
assertion.
Use the ERRP_GUARD() macro and check *errp, as suggested in commit
ae7c80a7bd ("error: New macro ERRP_GUARD()").
Cc: qemu-stable@nongnu.org
Fixes: f7e26ffa59 ("ACPI ERST: support for ACPI ERST feature")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231120130017.81286-1-philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU crashes on exit when a virtio-sound device has failed to
realise. Its vmstate field was not cleaned up properly with
qemu_del_vm_change_state_handler().
This patch changes the realize() order as
1. Validate the given configuration values (no resources allocated
by us either on success or failure)
2. Try AUD_register_card() and return on failure (no resources allocated
by us on failure)
3. Initialize vmstate, virtio device, heap allocations and stream
parameters at once.
If error occurs, goto error_cleanup label which calls
virtio_snd_unrealize(). This cleans up all resources made in steps
1-3.
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Fixes: 2880e676c0 ("Add virtio-sound device stub")
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231116072046.4002957-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Commit b7639b7dd0 ("hw/audio: Simplify hda audio init") inverted
the sense of hda codec property mixer during initialization.
Change the code so that mixer=on enables the hda mixer emulation
and mixer=off disables the hda mixer emulation.
With this change audio playback and recording streams don't start
muted by default.
Fixes: b7639b7dd0 ("hw/audio: Simplify hda audio init")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231105172552.8405-2-vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After a relatively short time, there is an multiplication overflow
when multiplying (now - buft_start) with hda_bytes_per_second().
While the uptime now - buft_start only overflows after 2**63 ns
= 292.27 years, this happens hda_bytes_per_second() times faster
with the multiplication. At 44100 samples/s * 2 channels
* 2 bytes/channel = 176400 bytes/s that is 14.52 hours. After the
multiplication overflow the affected audio stream stalls.
Replace the multiplication and following division with muldiv64()
to prevent a multiplication overflow.
Fixes: 280c1e1cdb ("audio/hda: create millisecond timers that handle IO")
Reported-by: M_O_Bz <m_o_bz@163.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231105172552.8405-1-vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio sound device is currently an unclassified PCI device.
~> sudo lspci -s '00:02.0' -v -nn | head -n 2
00:02.0 Unclassified device [00ff]:
Red Hat, Inc. Device [1af4:1059] (rev 01)
Subsystem: Red Hat, Inc. Device [1af4:1100]
Set the correct PCI class code to change the device to a
multimedia audio controller.
~> sudo lspci -s '00:02.0' -v -nn | head -n 2
00:02.0 Multimedia audio controller [0401]:
Red Hat, Inc. Device [1af4:1059] (rev 01)
Subsystem: Red Hat, Inc. Device [1af4:1100]
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231107185034.6434-1-vr_qemu@t-online.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When dumping table blobs using rebuild-expected-aml.sh, table blobs from all
test variants are dumped regardless of whether there are any actual changes to
the tables or not. This creates lot of new files for various test variants that
are not part of the git repository. This is because we do not check in all table
blobs for all test variants into the repository. Only those blobs for those
variants that are different from the generic test-variant agnostic blob are
checked in.
This change makes the test smarter by checking if at all there are any changes
in the tables from the checked-in gold master blobs and take actions
accordingly.
When there are no changes:
- No new table blobs would be written.
- Existing table blobs will be refreshed (git diff will show no changes).
When there are changes:
- New table blob files will be dumped.
- Existing table blobs will be refreshed (git diff will show that the files
changed, asl diff will show the actual changes).
When new tables are introduced:
- Zero byte empty file blobs for new tables as instructed in the header of
bios-tables-test.c will be regenerated to actual table blobs.
This would make analyzing changes to tables less confusing and there would
be no need to clean useless untracked files when there are no table changes.
CC: peter.maydell@linaro.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231107044952.5461-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
It doesn't make sense to have two classes of flaky tests. While it may
take the constrained environment of CI to trigger failures easily it
doesn't mean they don't occasionally happen on developer machines. As
CI is the gating factor to passing there is no point developers
running the tests locally anyway unless they are trying to fix things.
While we are at it update the language in the docs to discourage the
QEMU_TEST_FLAKY_TESTS becoming a permanent solution.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-3-alex.bennee@linaro.org>
netdev test keeps failing sometimes.
I don't think we should increase the timeout some more:
let's try something else instead, testing how busy the
system is.
Seems to work for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
getloadavg is supported on Linux, BSDs, Solaris.
Following man page:
RETURN VALUE
If the load average was unobtainable, -1 is returned; otherwise,
the number of samples actually retrieved is returned.
accordingly, make stub for systems which don't support this function return -1
for consistency.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Add a default BIOS for the new amigaone machine so it does not
require out of tree binary blob.
* SLOF update to fix virtio serial bugs.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmVof8kACgkQZ7MCdqhi
# HK71ng//TCpoi02/aZY5kAd1a1NxvRDd/gR9d5y79TaixgJ9FoV7joNg7Labu21r
# Gezghpgj7Ph+Wy175/qYhIJJ6JheK6xsAb7JmCJUq5HeOixJHkK0xHCJ0uGf1tcb
# c24+6JYa7K1Yd48EhGQUDwd+7J7QeAKPyJLSZHG2Qg9+sPX2koxa9tzZMoaWoA2L
# pMfXhUTBiK6Q93FtrQw16pRUcGrY542wLeA/nRaUFtuPdv38TDmJ4ktnid27fIh5
# 1+QVGQD0HCO29SVT/VP1TJenJukrYVjBfT8ulVC/wo53tZHhNSDVffXbRijrVFlX
# CPowJ2UebPwpvnvv8F8CSGPL4XPI+IBVdUOwZZMkH5oGaMXQW6mP4zsB7TK+g5z3
# 8+hQ0VZS0MzrrfSqufup8SUJAqJ1Sckx104clrpXtrBSAoiF634Qi1+UurwDVLFS
# VibKnMl31LauNRIWXVfj4BYOdH9oHOEHR5ghoaRguOAe58N7fGNiXC/WnScWbp8r
# PXE9D7SUMPtxNejDFRam+Df7JwTY+CdB56uvZ/behgs3FABfMmqBX+WgBbNhLaP4
# B4Wa0MTOAHz3itXRHYtvd6n3M9ts4nU88Srkuf0akAzp4Nv4b3+isuIncUazDREt
# q2z94oolhuZarLhsi/8Qo2G/SfJBNM0s4fmx4NTrqscupl5SadM=
# =7rvy
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Nov 2023 07:27:53 EST
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-8.2-20231130' of https://gitlab.com/npiggin/qemu:
ppc/amigaone: Allow running AmigaOS without firmware image
pseries: Update SLOF firmware image
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The machine uses a modified U-Boot under GPL license but the sources
of it are lost with only a binary available so it cannot be included
in QEMU. Allow running without the firmware image which can be used
when calling a boot loader directly and thus simplifying booting
guests. We need a small routine that AmigaOS calls from ROM which is
added in this case to allow booting AmigaOS without external firmware
image.
Fixes: d9656f860a ("hw/ppc: Add emulation of AmigaOne XE board")
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
It's been a while. This fixes compile warning, typos and
a bug with virtio-serial being used after it was shutdown
at "quiesce".
The full changelog is here:
Alexey Kardashevskiy (2):
Remove ?PICK
version: update to 20230918
Jordan Niethe (1):
virtio-serial: Do not close stdout on quiesce
Kautuk Consul (1):
virtio-serial: Make read and write methods report failure
Thomas Huth (10):
lib/libnet/ipv6: Silence compiler warning from Clang
Fix typos in the board-qemu folder
Fix typos in the lib/libnet folder
Fix typos in the remaining lib folders
Fix typos in the slof folder
Fix typos in the board-js2x folder
Fix typos in the llfw folder
Fix typos in the board-js2x folder
Fix typos in the clients folder
Fix remaining typos in various folders
Compiled with gcc-12.1.0-nolibc
Tested with (sorry, no KVM):
/home/aik/b/q-slof/qemu-system-ppc64 \
-nodefaults \
-chardev stdio,id=STDIO0,signal=off,mux=on \
-device spapr-vty,id=svty0,reg=0x71000110,chardev=STDIO0 \
-mon id=MON0,chardev=STDIO0,mode=readline \
-nographic \
-vga none \
-m 2G \
-kernel /home/aik/t/vml4150le \
-initrd /home/aik/t/le.cpio \
-machine pseries,cap-cfpc=broken,cap-sbbc=broken,cap-ibs=broken,cap-ccf-assist=off \
-bios pc-bios/slof.bin \
-trace events=/home/aik/qemu_trace_events \
-d guest_errors \
-chardev socket,id=SOCKET0,server=on,wait=off,path=qemu.mon.604650 \
-mon chardev=SOCKET0,mode=control \
-name 604650,debug-threads=on
[ npiggin: Also tested with KVM, including with virtio-console. ]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since socket_parse() will allocate memory for 'saddr',and its value
will pass to 'addr' that allocated by migrate_uri_parse(),
then 'saddr' will no longer used,need to free.
But due to 'saddr->u' is shallow copying the contents of the union,
the members of this union containing allocated strings,and will be used after that.
So just free 'saddr' itself without doing a deep free on the contents of the SocketAddress.
Fixes: 72a8192e22 ("migration: convert migration 'uri' into 'MigrateAddress'")
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231120031428.908295-1-zhouzongmin@kylinos.cn>
Return default value in legacy mode for BAR4 when unset. This can't be
set in reset method because BARs are cleared on reset so we return it
instead when BARs are read in legacy mode. This fixes UDMA on amigaone
with AmigaOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20231125140135.AF6A075A4C3@zero.eik.bme.hu>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vhost-user-blk export implement AioContext switches in its drain
implementation. This means that on drain_begin, it detaches the server
from its AioContext and on drain_end, attaches it again and schedules
the server->co_trip coroutine in the updated AioContext.
However, nothing guarantees that server->co_trip is even safe to be
scheduled. Not only is it unclear that the coroutine is actually in a
state where it can be reentered externally without causing problems, but
with two consecutive drains, it is possible that the scheduled coroutine
didn't have a chance yet to run and trying to schedule an already
scheduled coroutine a second time crashes with an assertion failure.
Following the model of NBD, this commit makes the vhost-user-blk export
shut down server->co_trip during drain so that resuming the export means
creating and scheduling a new coroutine, which is always safe.
There is one exception: If the drain call didn't poll (for example, this
happens in the context of bdrv_graph_wrlock()), then the coroutine
didn't have a chance to shut down. However, in this case the AioContext
can't have changed; changing the AioContext always involves a polling
drain. So in this case we can simply assert that the AioContext is
unchanged and just leave the coroutine running or wake it up if it has
yielded to wait for the AioContext to be attached again.
Fixes: e1054cd4aa
Fixes: https://issues.redhat.com/browse/RHEL-1708
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231127115755.22846-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The machine type is being detected based on "-M help" output, and we're
searching for the line ending with " (default)". However, in downstream
one of the machine types s marked as deprecated might become the
default, in which case this logic breaks as the line would now end with
" (default) (deprecated)". To fix potential issues here, let's relax
that requirement and detect the mere presence of " (default)" line
instead.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20231122121538.32903-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
From s390_possible_cpu_arch_ids() in hw/s390x/s390-virtio-ccw.c, the
"core-id" is the index of possible_cpus->cpus[], so it should only be
less than possible_cpus->len, which is equal to ms->smp.max_cpus.
Fix the wrong "core-id" 112, because it isn't less than maxcpus (36) in
-smp, and the valid core ids are 0-35 inclusive.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231127134917.568552-1-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The chip has 4 pins (called PIRQA-D in VT82C686B and PINTA-D in
VT8231) that are meant to be connected to PCI IRQ lines and allow
routing PCI interrupts to the ISA PIC. Route these in
via_isa_set_irq() to make it possible to share them with internal
functions that can also be routed to the same ISA IRQs.
Fixes: 2fdadd02e6
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <8c4513d8b78fac40e6d4e65a0a4b3a7f2f278a4b.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The VIA integrated south bridge chips combine several functions and
allow routing their interrupts to any of the ISA IRQs also allowing
multiple sources to share the same ISA IRQ. E.g. pegasos2 firmware
configures everything to use IRQ 9 but amigaone routes them to
separate ISA IRQs so the current simplified routing does not work.
Bring back via_isa_set_irq() and change it to take the component that
wants to change an IRQ and keep track of interrupt status of each
source separately and do the mapping to ISA IRQ within the ISA bridge.
This may not handle cases when an ISA IRQ is controlled by devices
directly, not going through via_isa_set_irq() such as serial, parallel
or keyboard but these IRQs being conventionally fixed are not likely
to be change by guests or share with other devices so this does not
cause a problem in practice.
This reverts commit 4e5a20b6da.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <1c3902d4166234bef0a476026441eaac3dd6cda5.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
With the introduction of list-based array properties in qdev, the string
output visitor has to deal with lists of non-integer elements now ('info
qtree' prints all properties with the string output visitor).
Currently there is no explicit support for such lists, and the resulting
output is only the last element because string_output_set() always
replaces the output with the latest value. Instead of replacing the old
value, append comma separated values in list context.
The difference can be observed in 'info qtree' with a 'rocker' device
that has a 'ports' list with more than one element.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231121173416.346610-3-kwolf@redhat.com>
Passing an uninitialised list to visit_start_list() happens to work for
the QObject output visitor because it treats the pointer as an opaque
value and never dereferences it, but the string output visitor expects a
valid list to check if it has more than one element.
The existing code crashes with the string output visitor if the
uninitialised value is non-NULL. Passing an explicit NULL would fix the
crash, but still result in wrong output.
Rework get_prop_array() so that it conforms to the expectations that the
string output visitor has. This includes building a real list first and
using visit_next_list() to iterate it.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1993
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Dan Hoffman <dhoff749@gmail.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231121173416.346610-2-kwolf@redhat.com>
The spips, qspips, and zynqmp-qspips share the same realize function
(xilinx_spips_realize) and initialize their io memory region with different
mmio_ops passed through the class. The size of the memory region is set to
the largest area (0x200 bytes for zynqmp-qspips) thus it is possible to write
out of s->regs[addr] in xilinx_spips_write for spips and qspips.
This fixes that wrong behavior.
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20231124143505.1493184-2-fkonrad@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit a75f336b97 added:
DEFINE_PROP_ARRAY("keycodes", StellarisGamepad, num_buttons,
keycodes, qdev_prop_uint32, uint32_t),
but forgot to free the 'keycodes' array. Do it in the instance_finalize
handler.
Fixes: a75f336b97 ("hw/input/stellaris_input: Convert to qdev")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-7-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit 9e4aa1fafe added:
DEFINE_PROP_ARRAY("pg0-lock",
XlnxVersalEFuseCtrl, extra_pg0_lock_n16,
extra_pg0_lock_spec, qdev_prop_uint16, uint16_t),
but forgot to free the 'extra_pg0_lock_spec' array. Do it in the
instance_finalize() handler.
Cc: qemu-stable@nongnu.org
Fixes: 9e4aa1fafe ("hw/nvram: Xilinx Versal eFuse device") # v6.2.0+
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-6-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit 68fbcc344e added:
DEFINE_PROP_ARRAY("read-only", XlnxEFuse, ro_bits_cnt, ro_bits,
qdev_prop_uint32, uint32_t),
but forgot to free the 'ro_bits' array. Do it in the instance_finalize
handler.
Cc: qemu-stable@nongnu.org
Fixes: 68fbcc344e ("hw/nvram: Introduce Xilinx eFuse QOM") # v6.2.0+
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-5-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit 4fb013afcc added:
DEFINE_PROP_ARRAY("oscclk", MPS2SCC, num_oscclk, oscclk_reset,
qdev_prop_uint32, uint32_t),
but forgot to free the 'oscclk_reset' array. Do it in the
instance_finalize() handler.
Cc: qemu-stable@nongnu.org
Fixes: 4fb013afcc ("hw/misc/mps2-scc: Support configurable number of OSCCLK values") # v6.0.0+
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-4-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit 8077b8e549 added:
DEFINE_PROP_ARRAY("reserved-regions", VirtIOIOMMUPCI,
vdev.nb_reserved_regions, vdev.reserved_regions,
qdev_prop_reserved_region, ReservedRegion),
but forgot to free the 'vdev.reserved_regions' array. Do it in the
instance_finalize() handler.
Cc: qemu-stable@nongnu.org
Fixes: 8077b8e549 ("virtio-iommu-pci: Add array of Interval properties") # v5.1.0+
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20231121174051.63038-3-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit edac4d8a16 back in 2015 when we added support for
the virtual timer offset CNTVOFF_EL2, we didn't correctly update
the timer-recalculation code that figures out when the timer
interrupt is next going to change state. We got it wrong in
two ways:
* for the 0->1 transition, we didn't notice that gt->cval + offset
can overflow a uint64_t
* for the 1->0 transition, we didn't notice that the transition
might now happen before the count rolls over, if offset > count
In the former case, we end up trying to set the next interrupt
for a time in the past, which results in QEMU hanging as the
timer fires continuously.
In the latter case, we would fail to update the interrupt
status when we are supposed to.
Fix the calculations in both cases.
The test case is Alex Bennée's from the bug report, and tests
the 0->1 transition overflow case.
Fixes: edac4d8a16 ("target-arm: Add CNTVOFF_EL2")
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/60
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231120173506.3729884-1-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The syndrome register value always has an IL field at bit 25, which
is 0 for a trap on a 16 bit instruction, and 1 for a trap on a 32
bit instruction (or for exceptions which aren't traps on a known
instruction, like PC alignment faults). This means that our
syn_*() functions should always either take an is_16bit argument to
determine whether to set the IL bit, or else unconditionally set it.
We missed setting the IL bit for the syndrome for three kinds of trap:
* an SVE access exception
* a pointer authentication check failure
* a BTI (branch target identification) check failure
All of these traps are AArch64 only, and so the instruction causing
the trap is always 64 bit. This means we can unconditionally set
the IL bit in the syn_*() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231120150121.3458408-1-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The URL to the Coverity tools download has changed; the old one points
to an obsolete version that is not supported anymore. Adjust to point
to the correct and supported tools.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pseudo-"in source tree" build used to run make in the build directory
as many times as goals. Worse, although .NOTPARALLEL is specified,
it does not work for patterns, and run make in parallel, which can break
things.
Add a new rule "build", and let it call make. The pattern rule only
needs to specify "build" as its prerequisite and have a no-op recipe so
that it does more than canceling built-in implicit rules.
Fixes: dedad02720 ("configure: add support for pseudo-"in source tree" builds")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20231119101604.47325-1-akihiko.odaki@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Propagate the buffer size to format_dec() and use snprintf().
This should silence this UBSan -Wformat-overflow warning:
In file included from /usr/include/stdio.h:906,
from include/qemu/osdep.h:114,
from ../disas/cris.c:21:
In function 'sprintf',
inlined from 'format_dec' at ../disas/cris.c:1737:3,
inlined from 'print_with_operands' at ../disas/cris.c:2477:12,
inlined from 'print_insn_cris_generic.constprop' at ../disas/cris.c:2690:8:
/usr/include/bits/stdio2.h:30:10: warning: null destination pointer [-Wformat-overflow=]
30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
31 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
32 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
Reported-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231120132222.82138-1-philmd@linaro.org>
[Rewritten to fix logic and avoid repeated expression. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Upgrade libvirt-ci so it covers macOS 14. Add a manual entry
(QEMU_JOB_OPTIONAL: 1) to test on Sonoma release. Refresh the
lci-tool generated files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231109160504.93677-3-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Given the recent confusion around how QEMU detects the system
Meson installation, and/or decides to install its own, it is
time to fill in the "Python virtual environments and the QEMU
build system" section of the documentation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
various random fixes for 8.2
- replace fedora-i386 cross compiler with debian
- update cirrus MacOS image to Ventura
- merge debian-native and debian-amd64 docker images
- fix compile of plugins on Windows mingw cross
- add some doc notes on semihosting READC
- add some doc notes on gdbstub
- skip loading debug symbols if we have failed
- enable arm-softmmu TCG tests
- don't attempt to use native cross builds for linux-user
- clean up registers gdb test case (ppc64/s390x)
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVfXowACgkQ+9DbCVqe
# KkQY6Af5AVjPG2aHmixvhTjxEx5dXAH3cGYsWbny3EByT2RijaTBBK/A4OB7RTVV
# fr11kGpCkJDk4JPoUz4yTuw6Q+7WBmB0tJJ5wcGyC9cyCjI/PttSTJUC7hiikifw
# dg1IVrJZX0ahOpUiDXAtDbeHK1/i95mDRtot40mnyv5HHYHlJKohKsUVtiQEWMeq
# 0/X/M5Zq8oJ6wCkbw1nsCqkWpZa7eh4YcB9cGNf87dd0ZJ9M93CbjdSQlsugF2gB
# pH+5ZGOj+L/zkbEKoaWJNwYzF4G6hJeLpqP2rLMqRfA5MM43wdd0dJ6gK0ylKeuR
# Bo7jC1oEOcuLibZY40OhlOwLTMWiDg==
# =ME/l
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 23 Nov 2023 09:15:40 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-for-8.2-fixes-231123-1' of https://gitlab.com/stsquad/qemu:
tests/tcg: finesse the registers check for "hidden" regs
configure: don't try a "native" cross for linux-user
tests/tcg: enable semiconsole test for Arm
tests/tcg: enable arm softmmu tests
testing: move arm system tests into their own folder
hw/core: skip loading debug on all failures
docs/system: clarify limits of using gdbstub in system emulation
docs/emulation: expand warning about semihosting
tests/tcg: fixup Aarch64 semiconsole test
target/nios2: Deprecate the Nios II architecture
plugins: fix win plugin tests on cross compile
tests/docker: merge debian-native with debian-amd64
.gitlab-ci.d/cirrus: Upgrade macOS to 13 (Ventura)
tests/docker: replace fedora-i386 with debian-i686
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pass the content of $mkvenv_flags (which is either "--online"
or empty) down to tests/Makefile.include.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unfortunately Coverity doesn't follow the logic aroung "len" and "l"
variables in stacks finishing with flatview_{read,write}_continue() and
generate a lot of OVERRUN false-positives. When small buffer (2 or 4
bytes) is passed to mem read/write path, Coverity assumes the worst
case of sz=8 in stn_he_p()/ldn_he_p() (defined in
include/qemu/bswap.h), and reports buffer overrun.
To silence these false-positives we have model functions, which hide
real logic from Coverity.
However, it turned out that these new two assertions are enough to
quiet Coverity.
Assertions are better than hiding the logic, so let's drop the
modelling and move to assertions for memory r/w call stacks.
After patch, the sequence
cov-make-library --output-file /tmp/master.xmldb \
scripts/coverity-scan/model.c
cov-build --dir ~/covtmp/master make -j9
cov-analyze --user-model-file /tmp/master.xmldb \
--dir ~/covtmp/master --all --strip-path "$(pwd)
cov-format-errors --dir ~/covtmp/master \
--html-output ~/covtmp/master_html_report
Generate for me the same big set of CIDs excepept for 6 disappeared (so
it becomes even better).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231005140326.332830-1-vsementsov@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The reason the ppc64 and s390x test where failing was because gdb
hides them although they are still accessible via regnum. We can
re-arrange the test a little bit and include these two arches in our
test.
We also need to be a bit more careful handling remote-registers as the
format isn't easily parsed with pure white space separation. Once we
fold types like "long long" and "long double" into a single word we
can now assert all registers are either listed or elided.
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: <qemu-s390x@nongnu.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: <qemu-ppc@nongnu.org>
Cc: Luis Machado <luis.machado@arm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231121153606.542101-1-alex.bennee@linaro.org>
As 32 bit x86 become rarer we are starting to run into problems with
search paths. Although we switched to a Debian container we still
favour the native CC on a Bookworm host. As a result we have a broken
cross compile setup which then fails to build with:
BUILD i386-linux-user guest-tests
In file included from /usr/include/linux/stat.h:5,
from /usr/include/bits/statx.h:31,
from /usr/include/sys/stat.h:465,
from /home/alex/lsrc/qemu.git/tests/tcg/multiarch/linux/linux-test.c:28:
/usr/include/linux/types.h:5:10: fatal error: asm/types.h: No such file or directory
5 | #include <asm/types.h>
| ^~~~~~~~~~~~~
compilation terminated.
make[1]: *** [Makefile:119: linux-test] Error 1
make: *** [/home/alex/lsrc/qemu.git/tests/Makefile.include:50: build-tcg-tests-i386-linux-user] Error 2
This is likely to affect more and more linux-user builds so wrap the
whole check in a test for softmmu targets (aka bare metal) which don't
worry about such header niceties. This allows us to keep using the
host compiler for softmmu tests and the roms.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-14-alex.bennee@linaro.org>
We need to ensure we squash the serial port if we want to hand craft
our muxed input. As a bonus emit the example with a V=1 build to make
it easier for people to figure out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-7-alex.bennee@linaro.org>
debian-native isn't really needed and suffers from the problem of
tracking a distros dependencies rather than the projects. With a
little surgery we can make the debian-amd64 container architecture
neutral and allow people to use it to build a native QEMU.
Rename it so it follows the same non-arch pattern of the other distro
containers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-4-alex.bennee@linaro.org>
Fourth RISC-V PR for 8.2
This is a few bug fixes for the 8.2 release
* Add Zicboz block size to hwprobe
* Creat the virt machine FDT before machine init is complete
* Don't verify ISA compatibility for zicntr and zihpm
* Fix SiFive E CLINT clock frequency
* Fix invalid exception on MMU translation stage
* Fix mxr bit behavior
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmVdk4sACgkQr3yVEwxT
# gBP6gQ/+NzdRT8Wx/9ynnKs0XwXBwOjQTHDcxCIKLWYrM26c3M+4XEU6IBdg2X1T
# qRv9Xal/pXqvAz8tIunF1fNd0Syom4UezcjvLjzipWwS32+D9KEKhKz89aoQc2SQ
# lnTBYz6lSUNppp3wj68gNAyPpht+5zVwYZDsjeZCRlAS00dcl26Xde8kt9tJW7zy
# tPBvHtJP9AVc+HJdClytEZ79G+EHN5Y4ScoJsVinXSBZs9lIQD+nPmFbxopre6kg
# +RUk56eATIlVMISD5pCYyCr3jTebMqVIFY9xtQxb4R09aLYN6+k13NfsJeIcQgaF
# MbhAGE0WbXEhKyHe4BuVtyz2k+zYtoh6YSE2Czub2pzPAfpKKWiu4Odi7vHlYejw
# Nksn3N7LR3FbhrDst71+EQ28vUuEYfECEFICjzHb+DhxlPxHW9WC4f8ciTUpT57O
# HPWYN7zn5Yw97nGBVuITVO7DfcQcw8MS8HcFEelkeDOephiDKr327SWTL+lp5+P5
# fm7PM4Z92GRvT3Voj4mebVxC62CGqehDotWRvXCvc87m4DfLsmpt0nNeX9q18zw+
# phEZ5Q8AMmEnRzpmoXEzzcDWyJIO6huJFad0imTR6MqvXYxsJYIr+wURDB6POelP
# SfMqdX9cTu8xJ7Hw4gJT9ZgcTlKsTq5LNpGZ/kLPXS6/y7fgC5Y=
# =QK14
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 Nov 2023 00:37:15 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20231122' of https://github.com/alistair23/qemu:
target/riscv/cpu_helper.c: Fix mxr bit behavior
target/riscv/cpu_helper.c: Invalid exception on MMU translation stage
riscv: Fix SiFive E CLINT clock frequency
target/riscv: don't verify ISA compatibility for zicntr and zihpm
hw/riscv/virt.c: do create_fdt() earlier, add finalize_fdt()
linux-user/riscv: Add Zicboz block size to hwprobe
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
SeaBIOS-hppa v13
Please pull an update of SeaBIOS-hppa to v13 to fix
a system reboot crash in qemu-system-hppa as reported in
https://gitlab.com/qemu-project/qemu/-/issues/1991
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZV0uiQAKCRD3ErUQojoP
# X/UEAP4vVLO/21SwO8/UpmImQPGTpoGUxA2DWYHBfjmyVGEoqwEA1sfhqpdahDJ0
# FLSculh9fFG7vWOMCZo2Xnur+X9ahgQ=
# =FaBT
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 17:26:17 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'seabios-hppa-v13-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 13
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
According to RISCV Specification sect 9.5 on two stage translation when
V=1 the vsstatus(mstatus in QEMU's terms) field MXR, which makes
execute-only pages readable, only overrides VS-stage page protection.
Setting MXR at HS-level(mstatus_hs), however, overrides both VS-stage
and G-stage execute-only permissions.
The hypervisor extension changes the behavior of MXR\MPV\MPRV bits.
Due to RISCV Specification sect. 9.4.1 when MPRV=1, explicit memory
accesses are translated and protected, and endianness is applied, as
though the current virtualization mode were set to MPV and the current
nominal privilege mode were set to MPP. vsstatus.MXR makes readable
those pages marked executable at the VS translation stage.
Fixes: 36a18664ba ("target/riscv: Implement second stage MMU")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231121071757.7178-3-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to RISCV privileged spec sect. 5.3.2 Virtual Address Translation Process
access-fault exceptions may raise only after PMA/PMP check. Current implementation
generates an access-fault for mbare mode even if there were no PMA/PMP errors.
This patch removes the erroneous MMU mode check and generates an access-fault
exception based on the pmp_violation flag only.
Fixes: 1448689c7b ("target/riscv: Allow specifying MMU stage")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231121071757.7178-2-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The extensions zicntr and zihpm were officially added in the privilege
instruction set specification 1.12. However, QEMU has been implemented
them long before it and thus they are forced to be on during the cpu
initialization to ensure compatibility (see riscv_cpu_init).
riscv_cpu_disable_priv_spec_isa_exts was not updated when the above
behavior was introduced, resulting in these extensions to be disabled
after all.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Fixes: c004099330 ("target/riscv: add zicntr extension flag for TCG")
Fixes: 0824121660 ("target/riscv: add zihpm extension flag for TCG")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231114123913.536194-1-chigot@adacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 49554856f0 fixed a problem, where TPM devices were not appearing
in the FDT, by delaying the FDT creation up until virt_machine_done().
This create a side effect (see gitlab #1925) - devices that need access
to the '/chosen' FDT node during realize() stopped working because, at
that point, we don't have a FDT.
This happens because our FDT creation is monolithic, but it doesn't need
to be. We can add the needed FDT components for realize() time and, at
the same time, do another FDT round where we account for dynamic sysbus
devices. In other words, the problem fixed by 49554856f0 could also be
fixed by postponing only create_fdt_sockets() and its dependencies,
leaving everything else from create_fdt() to be done during init().
Split the FDT creation in two parts:
- create_fdt(), now moved back to virt_machine_init(), will create FDT
nodes that doesn't depend on additional (dynamic) devices from the
sysbus;
- a new finalize_fdt() step is added, where create_fdt_sockets() and
friends is executed, accounting for the dynamic sysbus devices that
were added during realize().
This will make both use cases happy: TPM devices are still working as
intended, and devices such as 'guest-loader' have a FDT to work on
during realize().
Fixes: 49554856f0 ("riscv: Generate devicetree only after machine initialization is complete")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1925
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231110172559.73209-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Allow the VIA IDE controller to switch between both legacy and native modes by
calling pci_ide_update_mode() to reconfigure the device whenever PCI_CLASS_PROG
is updated.
This patch moves the initial setting of PCI_CLASS_PROG from via_ide_realize() to
via_ide_reset(), and removes the direct setting of PCI_INTERRUPT_PIN during PCI
bus reset since this is now managed by pci_ide_update_mode(). This ensures that
the device configuration is always consistent with respect to the currently
selected mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20231116103355.588580-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The via-ide device currently attempts to set the default BAR addresses to the
values shown in the datasheet, but this doesn't work for 2 reasons: firstly
BARS 1-4 do not set the bottom 2 bits to PCI_BASE_ADDRESS_SPACE_IO, and
secondly the initial PCI bus reset clears the values of all PCI device BARs
after the device itself has been reset.
Remove the setting of the default BAR addresses from via_ide_reset() to ensure
there is no doubt that these values are never exposed to the guest.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20231116103355.588580-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function reads the value of the PCI_CLASS_PROG register for PCI IDE
controllers and configures the PCI BARs and/or IDE ioports accordingly.
In the case where we switch to legacy mode, the PCI BARs are set to return zero
(as suggested in the "PCI IDE Controller" specification), the legacy IDE ioports
are enabled, and the PCI interrupt pin cleared to indicate legacy IRQ routing.
Conversely when we switch to native mode, the legacy IDE ioports are disabled
and the PCI interrupt pin set to indicate native IRQ routing. The contents of
the PCI BARs are unspecified, but this is not an issue since if a PCI IDE
controller has been switched to native mode then its BARs will need to be
programmed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20231116103355.588580-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests two parallel stream jobs that will complete around the same
time and run on two different disks in the same iothreads. It is loosely
based on the bug report at https://issues.redhat.com/browse/RHEL-1761.
For me, this test hangs reliably with the originally reported bug in
blk_remove_bs(). After fixing it, it intermittently hangs for the bugs
fixed after it, missing AioContext unlocking in bdrv_graph_wrunlock()
and in stream_prepare(). The deadlocks seem to happen more frequently
when the test directory is on tmpfs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-5-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In stream_prepare(), we need to temporarily drop the AioContext lock
that job_prepare_locked() took for us while calling the graph write lock
functions which can poll.
All block nodes related to this block job are in the same AioContext, so
we can pass any of them to bdrv_graph_wrlock()/ bdrv_graph_wrunlock().
Unfortunately, the one that we picked is base, which can be NULL - and
in this case the AioContext lock is not released and deadlocks can
occur.
Fix this by passing s->target_bs, which is never NULL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-4-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_graph_wrunlock() calls aio_poll(), which may run callbacks that
have a nested event loop. Nested event loops can depend on other
iothreads making progress, so in order to allow them to make progress it
must not hold the AioContext lock of another thread while calling
aio_poll().
This introduces a @bs parameter to bdrv_graph_wrunlock() whose
AioContext is temporarily dropped (which matches bdrv_graph_wrlock()),
and a bdrv_graph_wrunlock_ctx() that can be used if the BlockDriverState
doesn't necessarily exist any more when unlocking.
This also requires a change to bdrv_schedule_unref(), which was relying
on the incorrectly taken lock. It needs to take the lock itself now.
While this is a separate bug, it can't be fixed a separate patch because
otherwise the intermediate state would either deadlock or try to release
a lock that we don't even hold.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[kwolf: Fixed up bdrv_schedule_unref()]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While not all callers of blk_remove_bs() are correct in this respect,
the assumption in the function is that callers hold the AioContext lock
of the BlockBackend (this is required by the drain calls in it).
In order to avoid deadlock in the nested event loop, bdrv_graph_wrlock()
has then to be called with the root BlockDriverState as its parameter
instead of NULL, so that this AioContext lock is temporarily dropped.
Fixes: https://issues.redhat.com/browse/RHEL-1761
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-2-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Legacy software contains a standard mechanism for generating a reset to a
Serial ATA device - setting the SRST (software reset) bit in the Device
Control register.
Serial ATA has a more robust mechanism called COMRESET, also referred to
as port reset. A port reset is the preferred mechanism for error
recovery and should be used in place of software reset.
Commit e2a5d9b3d9 ("hw/ide/ahci: simplify and document PxCI handling")
improved the handling of PxCI, such that PxCI gets cleared after handling
a non-NCQ, or NCQ command (instead of incorrectly clearing PxCI after
receiving anything - even a FIS that failed to parse, which should NOT
clear PxCI, so that you can see which command slot that caused an error).
However, simply clearing PxCI after a non-NCQ, or NCQ command, is not
enough, we also need to clear PxCI when receiving a SRST in the Device
Control register.
A legacy software reset is performed by the host sending two H2D FISes,
the first H2D FIS asserts SRST, and the second H2D FIS deasserts SRST.
The first H2D FIS will not get a D2H reply, and requires the FIS to have
the C bit set to one, such that the HBA itself will clear the bit in PxCI.
The second H2D FIS will get a D2H reply once the diagnostic is completed.
The clearing of the bit in PxCI for this command should ideally be done
in ahci_init_d2h() (if it was a legacy software reset that caused the
reset (a COMRESET does not use a command slot)). However, since the reset
value for PxCI is 0, modify ahci_reset_port() to actually clear PxCI to 0,
that way we can avoid complex logic in ahci_init_d2h().
This fixes an issue for FreeBSD where the device would fail to reset.
The problem was not noticed in Linux, because Linux uses a COMRESET
instead of a legacy software reset by default.
Fixes: e2a5d9b3d9 ("hw/ide/ahci: simplify and document PxCI handling")
Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-ID: <20231108222657.117984-1-nks@flawful.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Coverity couldn't see that nr_existing was always going to be zero when
qemu_xen_xs_directory() returned NULL in the ENOENT case (CID 1523906).
Perhaps more to the point, neither could Peter at first glance. Improve
the code to hopefully make it clearer to Coverity and human reviewers
alike.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
If a Xen console is configured on the command line, do not add a default
serial port.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
target-arm queue:
* enable FEAT_RNG on Neoverse-N2
* hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ
* Fix SME FMOPA (16-bit), BFMOPA
* hw/core/machine: Constify MachineClass::valid_cpu_types[]
* stm32f* machines: Report error when user asks for wrong CPU type
* hw/arm/fsl-imx: Do not ignore Error argument
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmVchLYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3kHMD/47tKxzrsXc6+V9esRQGi2H
# 1hAgLBwglEdxLXokF+Di41sh/fvK7wYVXO/hiWlq+9h3kG3D/u1N5r1TdMPMUb9j
# 4Sg3rOejn7nzkxVZ6MZ/K/1j84C9bfrt4sboVHZVRvWuvbiyuTuivEr4IqLYO4x3
# AIwhFMQ5gbNrmClZh/DBxj0keO13cp63Fg2JSSICdi+1Dw9rRXTyhJloMu1omeqc
# k/BXzjSeNXpLSMyGWBR3uaPcJBaGC1xnz3Z1V7fUY1EYD2Cu1oo5lEZ9aNO5t30d
# XW/qVGLa3b1Cb7WuEO247RnU3N2oZotozjFtdj/8IQoYWspM9RHyipEimUlegVdO
# 3fpu8QGsN1ljNiwjdk0i6OwS7SGxcPtteFOaqEf/Yogj4EOKTn/Rx5TT4vJ5DhmI
# 2w/9J15JWDIE1paNwecuFWbxCOOzSsOtSxzuyLSZDU3GlNfJ4zoF6YboROLYfejy
# NXZABFhGd/0ykX7r0VY1GGYXUQ+akv6q+VDmVZCP9gMiRUiqmFPwMLMLlcuHb8G5
# 8UztN5SvOG2EYXj28Zx0BnGCNiGdI15rWMb0veqAtbnn3yEdltW3O475BAhZ0PB7
# OVpLWnXwmWURm/BGlwb1PH5s3kgWgzOebcBgcnCftwFQ8EedQAQDA5FmT+nK5SfV
# VoOf89PngTubU6B3BOfeBw==
# =thIa
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 05:21:42 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20231121' of https://git.linaro.org/people/pmaydell/qemu-arm:
hw/arm/fsl-imx: Do not ignore Error argument
hw/arm/stm32f100: Report error when incorrect CPU is used
hw/arm/stm32f205: Report error when incorrect CPU is used
hw/arm/stm32f405: Report error when incorrect CPU is used
hw/core/machine: Constify MachineClass::valid_cpu_types[]
target/arm: Fix SME FMOPA (16-bit), BFMOPA
hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ
target/arm: enable FEAT_RNG on Neoverse-N2
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fixes tcg_out_mov aborted.
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZVwXJgAKCRBAov/yOSY+
# 30HKBAC4+3oAaMqRDEBTlYT0oHmU3IVRv7Pkuht72YZ57qQwjq21jMpxRdeuAAT2
# McGzDIH/IbF0qG1HBako00jiwgGpx90aBU0KwOVgBjyjvUK2VXE268UoRs+WYVG/
# 7ljOHEnpvwJVTquAtDNFZIw0EFwiF75MP2rKvrSG8KmmrSu4hg==
# =oHNA
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 20 Nov 2023 21:34:14 EST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20231121' of https://gitlab.com/gaosong/qemu:
tcg/loongarch64: Fix tcg_out_mov() Aborted
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In the minimal pixman API stub that is used when the real pixman
dependency is missing a NULL dereference happens when
virtio-gpu-rutabaga allocates a pixman image with bits = NULL and
rowstride_bytes = zero. A buffer of rowstride_bytes * height is
allocated which is NULL. However, in that scenario pixman calculates a
new stride value based on given width, height and format size.
This commit adds a helper function that performs the same logic as
pixman.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231121093840.2121195-1-manos.pitsidianakis@linaro.org>
We should also consider -display vnc= as setting up a remote display,
and not attempt to add another default one.
The display_remote++ in qemu_setup_display() isn't necessary at this
point, but is there for completeness and further usages of the variable.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1988
Fixes: commit 484629fc81 ("vl: simplify display_remote logic ")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When display is "none", we may still have remote displays (I think it
would be simpler if VNC/Spice were regular display btw). Return the
default VC then, and set them up to fix a regression when using remote
display and it used the TTY instead.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1989
Fixes: commit 1bec1cc0d ("ui/console: allow to override the default VC")
Reported-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Those display have their own implementation of "vc" chardev, which
doesn't use pixman. They also don't implement the width/height/cols/rows
options, so qemu_display_get_vc() should return a compatible argument.
This patch was meant to be with the pixman series, when the "vc" field
was introduced. It fixes a regression where VC are created on the
tty (or null) instead of the display own "vc" implementation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Commit 1bec1cc0d ("ui/console: allow to override the default VC") changed
the behaviour of the "-display none" option, so that it now creates a
QEMU monitor on the terminal. "-display none" should not be tangled up
with whether we create a monitor or a serial terminal; it should purely
and only disable the graphical window. Changing its behaviour like this
breaks command lines which, for example, use semihosting for their
output and don't want a graphical window, as they now get a monitor they
never asked for.
It also breaks the command line we document for Xen in
docs/system/i386/xen.html:
$ ./qemu-system-x86_64 --accel kvm,xen-version=0x40011,kernel-irqchip=split \
-display none -chardev stdio,mux=on,id=char0,signal=off -mon char0 \
-device xen-console,chardev=char0 -drive file=${GUEST_IMAGE},if=xen
qemu-system-x86_64: cannot use stdio by multiple character devices
qemu-system-x86_64: could not connect serial device to character backend
'stdio'
When qemu is compiled without PIXMAN, by default the serials aren't
muxed with the monitor anymore on stdio. The serials are redirected to
"null" instead, and the monitor isn't set up.
Fixes: commit 1bec1cc0d ("ui/console: allow to override the default VC")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
In net_cleanup() we only need to delete the netdevs, as those may have
state which outlives Qemu when it exits, and thus may actually need to
be cleaned up on exit.
The nics, on the other hand, are owned by the device which created them.
Most devices don't bother to clean up on exit because they don't have
any state which will outlive Qemu... but XenBus devices do need to clean
up their nodes in XenStore, and do have an exit handler to delete them.
When the XenBus exit handler destroys the xen-net-device, it attempts
to delete its nic after net_cleanup() had already done so. And crashes.
Fix this by only deleting netdevs as we walk the list. As the comment
notes, we can't use QTAILQ_FOREACH_SAFE() as each deletion may remove
*multiple* entries, including the "safely" saved 'next' pointer. But
we can store the *previous* entry, since nics are safe.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
This implementation follows what bottom half does, but it does not add
a tracepoint for the case that the network device backend started
delivering a packet to a device which is already engaging in I/O. This
is because such reentrancy frequently happens for
qemu_flush_queued_packets() and is insignificant.
Fixes: CVE-2023-3019
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
In preparation for such a change, add MemReentrancyGuard * as a
parameter of qemu_new_nic().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The PNV I2C Controller was clearing the status register
after a reset without repopulating the "upper threshold
for I2C ports", "Command Complete" and the SCL/SDA input
level fields.
Fixed this for resets caused by a system reset as well
as from writing to the "Immediate Reset" register.
Fixes: 263b81ee15 ("ppc/pnv: Add an I2C controller model")
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PNV I2C engines for power9 and power10 were being assigned a base
XSCOM address that was off by one I2C engine's address range such
that engine 0 had engine 1's address and so on. The xscom address
assignment was being based on the device tree engine numbering, which
starts at 1. Rather than changing the device tree numbering to start
with 0, the addressing was changed to be based on the existing device
tree numbers minus one.
Fixes: 1ceda19c28 ("ppc/pnv: Connect PNV I2C controller to powernv10)
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The patch below fixes a bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2
macros in target/ppc/fpu_helper.c where a non-NaN floating point value from the
source vector is incorrectly converted to 0, 0x80000000, or 0x8000000000000000
instead of the expected value if a preceding source floating point value from
the same source vector was a NaN.
The bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2 macros in
target/ppc/fpu_helper.c was introduced with commit c3f24257e3.
This patch also adds a new vsx_f2i_nan test in tests/tcg/ppc64 that checks that
the VSX xvcvspsxws, xvcvspuxws, xvcvspsxds, xvcvspuxds, xvcvdpsxws, xvcvdpuxws,
xvcvdpsxds, and xvcvdpuxds instructions correctly convert non-NaN floating point
values to integer values if the source vector contains NaN floating point values.
Fixes: c3f24257e3 ("target/ppc: Clear fpstatus flags on helpers missing it")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1941
Signed-off-by: John Platts <john_platts@hotmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Coverity warns that "i2c_bus_busy(i2c->busses[i]) << i" might overflow
because the expression is evaluated using 32-bit arithmetic and then
used in a context expecting a uint64_t.
While we are at it, introduce a PNV_I2C_MAX_BUSSES constant and check
the number of busses at realize time.
Fixes: Coverity CID 1523918
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
On LoongArch host, we got an Aborted from tcg_out_mov().
qemu-x86_64 configure with '--enable-debug'.
> (gdb) b /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312
> Breakpoint 1 at 0x2576f0: file /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc, line 312.
> (gdb) run hello
[...]
> Thread 1 "qemu-x86_64" hit Breakpoint 1, tcg_out_mov (s=0xaaaae91760 <tcg_init_ctx>, type=TCG_TYPE_V128, ret=TCG_REG_V2,
> arg=TCG_REG_V0) at /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312
> 312 g_assert_not_reached();
> (gdb) bt
> #0 tcg_out_mov (s=0xaaaae91760 <tcg_init_ctx>, type=TCG_TYPE_V128, ret=TCG_REG_V2, arg=TCG_REG_V0)
> at /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312
> #1 0x000000aaaad0fee0 in tcg_reg_alloc_mov (s=0xaaaae91760 <tcg_init_ctx>, op=0xaaaaf67c20) at ../tcg/tcg.c:4632
> #2 0x000000aaaad142f4 in tcg_gen_code (s=0xaaaae91760 <tcg_init_ctx>, tb=0xffe8030340 <code_gen_buffer+197328>,
> pc_start=4346094) at ../tcg/tcg.c:6135
[...]
> (gdb) c
> Continuing.
> **
> ERROR:/home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312:tcg_out_mov: code should not be reached
> Bail out! ERROR:/home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312:tcg_out_mov: code should not be reached
>
> Thread 1 "qemu-x86_64" received signal SIGABRT, Aborted.
> 0x000000fff7b1c390 in raise () from /lib64/libc.so.6
> (gdb) q
Fixes: 16288ded94 ("tcg/loongarch64: Lower basic tcg vec ops to LSX")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231120065916.374045-1-gaosong@loongson.cn>
Both i.MX25 and i.MX6 SoC models ignore the Error argument when
setting the PHY number. Pick &error_abort which is the error
used by the i.MX7 SoC (see commit 1f7197deb0 "ability to change
the FEC PHY on i.MX7 processor").
Fixes: 74c1330582 ("ability to change the FEC PHY on i.MX25 processor")
Fixes: a9c167a3c4 ("ability to change the FEC PHY on i.MX6 processor")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231120115116.76858-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'stm32vldiscovery' machine ignores the CPU type requested by
the command line. This might confuse users, since the following
will create a machine with a Cortex-M3 CPU:
$ qemu-system-aarch64 -M stm32vldiscovery -cpu neoverse-n1
Set the MachineClass::valid_cpu_types field (introduced in commit
c9cf636d48 "machine: Add a valid_cpu_types property").
Remove the now unused MachineClass::default_cpu_type field.
We now get:
$ qemu-system-aarch64 -M stm32vldiscovery -cpu neoverse-n1
qemu-system-aarch64: Invalid CPU type: neoverse-n1-arm-cpu
The valid types are: cortex-m3-arm-cpu
Since the SoC family can only use Cortex-M3 CPUs, hard-code the
CPU type name at the SoC level, removing the QOM property
entirely.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231117071704.35040-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'netduino2' machine ignores the CPU type requested by the
command line. This might confuse users, since the following will
create a machine with a Cortex-M3 CPU:
$ qemu-system-arm -M netduino2 -cpu cortex-a9
Set the MachineClass::valid_cpu_types field (introduced in commit
c9cf636d48 "machine: Add a valid_cpu_types property").
Remove the now unused MachineClass::default_cpu_type field.
We now get:
$ qemu-system-arm -M netduino2 -cpu cortex-a9
qemu-system-arm: Invalid CPU type: cortex-a9-arm-cpu
The valid types are: cortex-m3-arm-cpu
Since the SoC family can only use Cortex-M3 CPUs, hard-code the
CPU type name at the SoC level, removing the QOM property
entirely.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231117071704.35040-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both 'netduinoplus2' and 'olimex-stm32-h405' machines ignore the
CPU type requested by the command line. This might confuse users,
since the following will create a machine with a Cortex-M4 CPU:
$ qemu-system-aarch64 -M netduinoplus2 -cpu cortex-r5f
Set the MachineClass::valid_cpu_types field (introduced in commit
c9cf636d48 "machine: Add a valid_cpu_types property").
Remove the now unused MachineClass::default_cpu_type field.
We now get:
$ qemu-system-aarch64 -M netduinoplus2 -cpu cortex-r5f
qemu-system-aarch64: Invalid CPU type: cortex-r5f-arm-cpu
The valid types are: cortex-m4-arm-cpu
Since the SoC family can only use Cortex-M4 CPUs, hard-code the
CPU type name at the SoC level, removing the QOM property
entirely.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231117071704.35040-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ICC_PMR_ELx and ICV_PMR_ELx bit masks returned from
ic{c,v}_fullprio_mask should technically also remove any
bit above 7 as these are marked reserved (read 0) and should
therefore should not be written as anything other than 0.
This was noted during a run of a proprietary test system and
discused on the mailing list [1] and initially thought not to
be an issue due to RES0 being technically allowed to be
written to and read back as long as the implementation does
not use the RES0 bits. It is very possible that the values
are used in comparison without masking, as pointed out by
Peter in [2], if (cs->hppi.prio >= cs->icc_pmr_el1) may well
do the wrong thing.
Masking these values in ic{c,v}_fullprio_mask() should fix
this and prevent any future problems with playing with the
values.
[1]: https://lists.nongnu.org/archive/html/qemu-arm/2023-11/msg00607.html
[2]: https://lists.nongnu.org/archive/html/qemu-arm/2023-11/msg00737.html
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Message-id: 20231116172818.792364-1-ben.dooks@codethink.co.uk
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HPPA64-PATCHES-for-8.2
Two patches for 8.2.
The SHRPD patch fixes a real translation bug which then allows to boot
the 64-bit Linux kernels of the Debian-11 and Debian-12 installation CDs.
The second patch adds the instruction byte sequence to the
assembly log. This is not an actual bug fix, but it's important since
it helps a lot when trying to fix qemu translation bugs on hppa.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZVfHPwAKCRD3ErUQojoP
# X3TrAQD2SfFsTWIYqTamh1ZHmydaJRL1xhXmPMqXgXFkDmiyhQD/VeyIyWEGj5Oe
# x70WR8HrtkadsUddgSGzFRChaVb0/wI=
# =Sapq
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Nov 2023 15:04:15 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa64-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
disas/hppa: Show hexcode of instruction along with disassembly
target/hppa: Fix 64-bit SHRPD instruction
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In FDPIC signal handlers are passed around as FD pointers. Actual code
address and GOT pointer must be fetched from memory by the QEMU code
that implements kernel signal delivery functionality. This change is
equivalent to the following kernel change:
9c2cc74fb31e ("xtensa: fix signal delivery to FDPIC process")
Cc: qemu-stable@nongnu.org
Fixes: d2796be69d ("linux-user: add support for xtensa FDPIC")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
On hppa many instructions can be expressed by different bytecodes.
To be able to debug qemu translation bugs it's therefore necessary to see the
currently executed byte codes without the need to lookup the sequence without
the full executable.
With this patch the instruction byte code is shown beside the disassembly.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When shifting the two joined 64-bit registers right, shift the upper
64-bit register to the left and the lower 64-bit register to the right
before merging them with OR.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Improve
$ qemu-system-x86_64 -device max-x86_64-cpu,vendor=me
qemu-system-x86_64: -device max-x86_64-cpu,vendor=me: Property '.vendor' doesn't take value 'me'
to
qemu-system-x86_64: -device max-x86_64-cpu,vendor=0123456789abc: value of property 'vendor' must consist of exactly 12 characters
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Typo corrected]
The error message
{"execute": "balloon", "arguments":{"value": -1}}
{"error": {"class": "GenericError", "desc": "Parameter 'target' expects a size"}}
points to 'target' instead of 'value'. Fix:
{"error": {"class": "GenericError", "desc": "Parameter 'value' expects a size"}}
Root cause: qmp_balloon()'s parameter is named @target. Rename it to
@value to match the QAPI schema.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-7-armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
The error message
$ qemu-system-x86_64 -netdev user,id=net0,ipv6-net=fec0::0/
qemu-system-x86_64: -netdev user,id=net0,ipv6-net=fec0::0/: Parameter 'ipv6-prefixlen' expects a number
points to ipv6-prefixlen instead of ipv6-net. Fix:
qemu-system-x86_64: -netdev user,id=net0,ipv6-net=fec0::0/: parameter 'ipv6-net' expects a number after '/'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-6-armbru@redhat.com>
set_password with "protocol": "vnc" supports only "connected": "keep".
Any other value is rejected with
Invalid parameter 'connected'
Improve this to
parameter 'connected' must be 'keep' when 'protocol' is 'vnc'
client_migrate_info requires "port" or "tls-port". When both are
missing, it fails with
Parameter 'port/tls-port' is missing
Improve this to
parameter 'port' or 'tls-port' is required
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When dynamic-reconfiguration is off, hot plug / unplug can fail with
"Bus 'spapr-pci-host-bridge' does not support hotplugging".
spapr-pci-host-bridge is a device, not a bus. Report the name of the
bus it provides instead: 'pci.0'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-2-armbru@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Like replay_linux.py, reverse_debugging.py starts the vm with console
set but does not interact with it (e.g., with wait_for_console_pattern).
In this situation, the console should have a drainer attached so the
socket does not fill. replay_linux.py has a drainer, but it is missing
from reverse_debugging.py.
Per analysis in Link: this can cause the console socket/pipe to fill and
QEMU get stuck in qemu_chr_write_buffer, leading to strange test case
failures (ppc64 fails because it prints a lot to console in early bios).
Attaching a drainer prevents this.
Note, this commit does not fix bugs introduced by the commits referenced
in the first two Fixes: tags, but together those commits conspire to
irritate the problem and cause test case failure, which this commit
fixes.
Link: https://lore.kernel.org/qemu-devel/ZVT-bY9YOr69QTPX@redhat.com/
Fixes: 1d4796cd00 ("python/machine: use socketpair() for console connections")
Fixes: 761a13b239 ("tests/avocado: ppc64 reverse debugging tests for pseries and powernv")
Fixes: be52eca309 ("tests/acceptance: add reverse debugging test")
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20231116115354.228678-1-npiggin@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In a perfect world we'd have reproducible tests,
but then we'd be sure we run the same binaries.
If a binary artifact isn't hashed, we have no idea
what we are running. Therefore enforce hashing for
all our artifacts.
With this change, unhashed artifacts produce:
$ avocado run tests/avocado/multiprocess.py
(1/2) tests/avocado/multiprocess.py:Multiprocess.test_multiprocess_x86_64:
ERROR: QemuBaseTest.fetch_asset() missing 1 required positional argument: 'asset_hash' (0.19 s)
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20231115205149.90765-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The multiprocess test is currently succeeding with an annoying warning:
(1/2) tests/avocado/multiprocess.py:Multiprocess.test_multiprocess_x86_64:
WARN: Test passed but there were warnings during execution. Check
the log for details
In the log, you can find an entry like:
WARNI| No hash provided. Cannot check the asset file integrity.
Add the proper asset hashes to avoid those warnings.
Message-ID: <20231115145852.494052-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "edid" feature has been added to vhost-user-gpu in commit
c06444261e ("contrib/vhost-user-gpu: implement get_edid feature"),
so waiting for "features: +virgl -edid" in the test does not work
anymore, it's "+edid" instead of "-edid" now!
While we're at it, move the expected string to the preceeding
exec_command_and_wait_for_pattern() instead (since waiting for
empty string here does not make too much sense).
Message-ID: <20231114203456.319093-1-thuth@redhat.com>
Reviewed-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes: 2e12dd405c "util/filemonitor-inotify: qemu_file_monitor_watch(): assert no overflow"
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: bb67ec32a0 "target/hppa: Include PSW_P in tb flags and mmu index"
Fixes: d7553f3591 "target/hppa: Populate an interval tree with valid tlb entries"
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 593c28c02c "migration/doc: How to migrate when hosts have different features"
Fixes: 1aefe2ca14 "migration/doc: Add documentation for backwards compatiblity"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 761e3c1088 "gdbstub: fixes cases where wrong threads were reported to GDB on SIGINT"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 388d6b574e "hw/cxl: Use switch statements for read and write of cachemem registers"
Fixes: 3314efd276 "hw/cxl/mbox: Add Physical Switch Identify command."
Fixes: 004e3a93b8 "hw/cxl: Add tunneled command support to mailbox for switch cci."
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: a99d740347 "bsd-user: Implement do_obreak function"
Fixes: 8632729060 "bsd-user: Implement freebsd_exec_common, used in implementing execve/fexecve."
Fixes: bf14f13d8b "bsd-user: Implement stat related syscalls"
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qdict.txt only consists of more or less random test data. We
can simply drop the lines with the problematic words here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The tests/decode/ folder belongs to scripts/decodetree.py, so
it should be listed in the same section as the script.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Aspeed watchdog doesn't use anything from the System Control Unit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Without this, we just dirty a single byte, and so if the caller writes
more than one byte to the host memory then we won't have invalidated any
translation blocks that start after the first byte and overlap those
writes. In particular, AArch64's DC ZVA implementation uses probe_access
(via probe_write), and so we don't invalidate the entire block, only the
TB overlapping the first byte (and, in the unusual case an unaligned VA
is given to the instruction, we also probe that specific address in
order to get the right VA reported on an exception, so will invalidate a
TB overlapping that address too). Since our IC IVAU implementation is a
no-op for system emulation that relies on the softmmu already having
detected self-modifying code via this mechanism, this means we have
observably wrong behaviour when jumping to code that has been DC ZVA'ed.
In practice this is an unusual thing for software to do, as in reality
the OS will DC ZVA the page and the application will go and write actual
instructions to it that aren't UDF #0, but you can write a test that
clearly shows the faulty behaviour.
For functions other than probe_access it's not clear what size to use
when 0 is passed in. Arguably a size of 0 shouldn't dirty at all, since
if you want to actually write then you should pass in a real size, but I
have conservatively kept the implementation as dirtying the first byte
in that case so as to avoid breaking any assumptions about that
behaviour.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20231104031232.3246614-1-jrtc27@jrtc27.com>
[rth: Move the dirtysize computation next to notdirty_write.]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PV dumps block vcpu runs until dump end is reached. If there's an
error between PV dump init and PV dump end the vm will never be able
to run again. One example of such an error is insufficient disk space
for the dump file.
Let's add a cleanup function that tries to do a dump end. The dump
completion data is discarded but there's no point in writing it to a
file anyway if there's a possibility that other PV dump data is
missing.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20231109120443.185979-4-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Python 3.12 now warns about backslashes in strings that aren't used
for escaping a special character from Python. Silence the warning
by using raw strings here instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231113140721.46903-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The new SeaBIOS-hppa version 12 includes the necessary fixes to
support emulated PA2.0 CPUs and which allows starting 64-bit Linux
kernels in the guest.
To boot a 64-bit machine use the "-machine C3700" qemu option.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
SEABIOS_HPPA_VERSION 12 contains those fixes and enhancements:
- Reduce debug level
- Update README file for PA-RISC
- Fix debug name of CPU_HPA_xx if xx >= 10
- Disable device indexing
SEABIOS_HPPA_VERSION 11 contains those fixes and enhancements
(mostly to enable support for 64-bit Linux kernel):
- Fixed 64-bit CPU detection via "mfctl,w" instruction
- Implement PDC_PSW for 64-bit CPUs
- Added PAT PDC functions:
- PDC_PAT_CELL
- PDC_PAT_CHASSIS_LOG
- PDC_PAT_PD_GET_ADDR_MAP
- PDC_PAT_CPU
- Fix return value of PDC_CACHE_RET_SPID space-id bits
- Introduce new default software IDs for the machines
- Fix CPU and FPU model numbers
- Fix 64-bit SMP rendezvous
- Fix Linux 64-bit kernel crash in STI due to usage of unsigned
32-bit "next_font" pointer in sti header files
- Fix graphics output to LASI artist card on PA2.0 machines
- More USB OHCI endianess fixes
- Fixes which make ODE run on B160L
- Fixes which make ODE detect Astro Runway port and CPUs
- Implement "firmware unlocking" via PDC_MODEL/PDC_MODEL_CAPABILITIES call
- Add subfunction 2 for PDC_MODEL_VERSIONS
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Something appears to be off between the 64-bit CPU, the 32-bit PDC
(SeaBIOS-hppa firmware), and the 64-bit kernel in addressing the
power button address in high-mapped firmware memory.
Use a 32-bit value at PAGE0->pad0[4] instead.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Apply the "32-bit PCI addressing on 40-bit Runway" as the default
iommu transformation. This allows PCI devices to dma PDC memory.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is the value that is supported by both PA-8500 and Astro.
If we support a larger address space than expected, we trip up
software that did not fill in all of the page table bits,
expecting them to be ignored.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Align the language with pa2.0, separating absolute and physical.
The translation from absolute to physical depends on PSW.W, and
we prefer not to flush between changes, therefore use 2 mmu_idx.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Coverty found that the shift of TARGET_PAGE_SIZE (32-bit type) might
overflow. Fix it by casting TARGET_PAGE_SIZE to a 64-bit type before
doing the shift (CID 1523902 and CID 1523908).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <ZU6F/H8CZr3q4pP/@p100>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Need to use iasq_b and iaoq_b to determine back register of CR_IIASQ.
This fixes random faults when booting up Linux user space.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Direct privilege level to mmu_idx mapping has been
false for some time. Provide the correct value to
hppa_get_physical_address.
Fixes: fa824d99f9 ("target/hppa: Switch to use MMU indices 11-15")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
During the conversion to decodetree, the 2-bit mask was lost.
Fixes: deee69a19f ("target/hppa: Convert memory management insns")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to the technical reference manual, the Cortex-A9
has a Perfomance Unit Monitor (PMU):
https://developer.arm.com/documentation/100511/0401/performance-monitoring-unit/about-the-performance-monitoring-unit
The Cortex-A8 does also.
We already already define the PMU registers when emulating the
Cortex-A8 and Cortex-A9, because we put them in v7_cp_reginfo[]
rather than guarding them behind ARM_FEATURE_PMU. So the only thing
that setting the feature bit changes is that the registers actually
do something.
Enable ARM_FEATURE_PMU for Cortex-A8 and Cortex-A9, to avoid
this anomaly.
(The A8 and A9 PMU predates the standardisation of ID_DFR0.PerfMon,
so the field there is 0, but the PMU is still present.)
Signed-off-by: Nikita Ostrenkov <n.ostrenkov@gmail.com>
Message-id: 20231112165658.2335-1-n.ostrenkov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message; also enable PMU for A8]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU has validations to make sure that a VM is not started with more memory
(static and hotpluggable memory) than what the guest processor can address
directly with its addressing bits. This change adds a test to make sure QEMU
fails to start with a specific error message when an attempt is made to
start a VM with more memory than what the processor can directly address.
The test also checks for passing cases when the address space of the processor
is capable of addressing all memory. Boundary cases are tested.
CC: imammedo@redhat.com
CC: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20231109045601.33349-1-anisinha@redhat.com>
Message-ID: <D5D8D419-76BA-4FB0-9BAC-4F7470A052FC@redhat.com>
[PMD: Use SPDX tag]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When calling trace_vmware_verify_rect_greater_than_bound() replace
"y" with "h" and y with h
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 02218aedb1 ("hw/display/vmware_vga: replace fprintf calls with trace events")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231110174104.13280-1-adiupina@astralinux.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When we are doing a FEAT_MOPS copy that must be performed backwards,
we call mte_mops_probe_rev(), passing it the address of the last byte
in the region we are probing. However, allocation_tag_mem_probe()
wants the address of the first byte to get the tag memory for.
Because we passed it (ptr, size) we could incorrectly trip the
allocation_tag_mem_probe() check for "does this access run across to
the following page", and if that following page happened not to be
valid then we would assert.
We know we will always be only dealing with a single page because the
code that calls mte_mops_probe_rev() ensures that. We could make
mte_mops_probe_rev() pass 'ptr - (size - 1)' to
allocation_tag_mem_probe(), but then we would have to adjust the
returned 'mem' pointer to get back to the tag RAM for the last byte
of the region. It's simpler to just pass in a size of 1 byte,
because we know that allocation_tag_mem_probe() in pure-probe
single-page mode doesn't care about the size.
Fixes: 69c51dc372 ("target/arm: Implement MTE tag-checking functions for FEAT_MOPS copies")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231110162546.2192512-1-peter.maydell@linaro.org
Since commit 9036e917f8 ("{include/}hw/arm: refactor virt PPI logic"),
GIC maintenance IRQ registration fails on arm64:
[ 0.979743] kvm [1]: Cannot register interrupt 9
That commit re-defined VIRTUAL_PMU_IRQ to be a INTID but missed a case
where the maintenance IRQ is actually referred by its PPI index. Just
like commit fa68ecb330 ("hw/arm/virt: fix PMU IRQ registration"), use
INITID_TO_PPI(). A search of "GIC_FDT_IRQ_TYPE_PPI" indicates that there
shouldn't be more similar issues.
Fixes: 9036e917f8 ("{include/}hw/arm: refactor virt PPI logic")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20231110090557.3219206-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hi,
"Host Memory Backends" and "Memory devices" queue ("mem"):
- One virtio-mem fix leading to a QEMU crash in QEMU debug builds
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEG9nKrXNcTDpGDfzKTd4Q9wD/g1oFAmVR4DsRHGRhdmlkQHJl
# ZGhhdC5jb20ACgkQTd4Q9wD/g1qKMQ//fe/4mJOXQ8l5OZ3ScpC2K7yoB9dowJiQ
# vobja0X0UhyMIOEH4V5RDtMrW3WcYzD2rVwehpLel3QbwcGa7TTB8NtkTx/t4L8P
# tRQe3epGvz+0Kkx4kBFcNBYNR5Skl1rg9kcDhYxNmoOLngWjJcDqRBryfc3V9pEs
# dl9sWXaQn82MGNQGuWFnTOUeOgg1LIdKMRcU2AzhAhrA/e4BqOof/JW+PVdQfzDq
# 4Jhq74pDmKiuH9GmRZgbNlNFX+GxRk63jJrRw4HDAbSD5dBmVnLAjgFZ0sBcKxe0
# HyiGrZOZNIMhMl/GwwQ7NilN03Hl6Hqlx03nz96/2DbiEKr6sOAErIclkUOVlr7k
# YeJvFv+iijqyC4XF43OqoIOz8mtkxan8CuiZW/6/FV9mS/Rb3r8of/BnrK2a8/Kh
# RJLX3tsmrxFdFDxVXWPw+UYrJy8g0xQP2Ils3OReO8QO9qqCytPqJFQsSHDlK3T3
# 2K5FiDpMu7cjFezLyRF0LkPSWg1CV7D6Vc8mp+amc2K4Ltiyhp4xZ2TBKrEC8HHE
# zs+EyEIfsna4SaKwVUVRimWF3+B4GojoAcAD0zju+uhD8Zw+z553zXpr5TSx0Une
# cbMs1n5MTzE6pQo1MmL3hu1xaf6Xdx7hnJPlcnjlKXGFol8ghv6tBkHbOQA5B1/H
# 7hVX43f3epM=
# =7M1K
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Nov 2023 03:37:15 EST
# gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg: issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [unknown]
# gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
# gpg: aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D FCCA 4DDE 10F7 00FF 835A
* tag 'mem-2023-11-13' of https://github.com/davidhildenbrand/qemu:
virtio-mem: fix division by zero in virtio_mem_activate_memslots_to_plug()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Coverity complains about passing "&expected" to "run_range_inverse_array",
which dereferences null "expected". I guess the problem is that the
compare_ranges() loop dereferences 'e' without testing it. However the
loop condition is based on 'ranges' which is garanteed to have
the same length as 'expected' given the g_assert_cmpint() just
before the loop. So the code looks safe to me.
Nevertheless adding a test on expected before the loop to get rid of the
warning.
Fixes: CID 1523901
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Coverity (CID 1523901)
Message-ID: <20231110083654.277345-1-eric.auger@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We requiere the 'ninja-build', which depends on 'python311':
$ pkgin show-deps ninja-build
direct dependencies for ninja-build-1.11.1nb1
python311>=3.11.0
So we end up installing both Python v3.10 and v3.11:
[31/76] installing python311-3.11.5...
[54/76] installing python310-3.10.13...
[74/76] installing py310-expat-3.10.13nb1...
Then the build system picks Python v3.11, and doesn't find
py-expat because we only installed the 3.10 version:
python determined to be '/usr/pkg/bin/python3.11'
python version: Python 3.11.5
*** Ouch! ***
Python's pyexpat module is not found.
It's normally part of the Python standard library, maybe your distribution packages it separately?
Either install pyexpat, or alleviate the need for it in the first place by installing pip and setuptools for '/usr/pkg/bin/python3.11'.
(Hint: NetBSD's pkgsrc debundles this to e.g. 'py310-expat'.)
ERROR: python venv creation failed
Fix by installing py-expat for v3.11. Remove the v3.10
packages since we aren't using them anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231109150900.91186-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's a little bit weird that the files in target/i386/ which
are not in a subfolder there do not have any associated
maintainer (and thus nobody might be CC:-ed on changes to
these files). We should have a general x86 section for these
files, similar to what we already have for s390x and mips.
Since Paolo is already listed as maintainer for both, the
x86 KVM and TCG CPUs, I'd like to suggest him as maintainer
for the general files, too.
Message-ID: <20230929134551.395438-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This header include/hw/timer/stellaris-gptm.h obviously belongs to the
Stellaris machines, so let's add it to the corresponding section.
And hw/display/ssd0303.c and hw/display/ssd0323.c are only used
by hw/arm/stellaris.c, so add them to the corresponding section
in the MAINTAINERS file, too.
Message-ID: <20231020060936.524988-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The current code assumes that there is always a vfio group, but
that's no longer guaranteed with the iommufd backend when using
cdev. In this case, we don't need to track the vfio dma limit
anyway.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20231110175108.465851-2-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling QEMU with Clang 17 on a s390x, the compilation fails:
In file included from ../accel/tcg/cputlb.c:32:
In file included from /root/qemu/include/exec/helper-proto-common.h:10:
In file included from /root/qemu/include/qemu/atomic128.h:62:
/root/qemu/host/include/generic/host/atomic128-ldst.h:68:15: error:
__sync builtin operation MUST have natural alignment (consider using __
atomic). [-Werror,-Wsync-alignment]
68 | } while (!__sync_bool_compare_and_swap_16(ptr_align, old, new.i));
| ^
In file included from ../accel/tcg/cputlb.c:32:
In file included from /root/qemu/include/exec/helper-proto-common.h:10:
In file included from /root/qemu/include/qemu/atomic128.h:61:
/root/qemu/host/include/generic/host/atomic128-cas.h:36:11: error:
__sync builtin operation MUST have natural alignment (consider using __a
tomic). [-Werror,-Wsync-alignment]
36 | r.i = __sync_val_compare_and_swap_16(ptr_align, c.i, n.i);
| ^
2 errors generated.
It's arguably a bug in Clang since we already use __builtin_assume_aligned()
to tell the compiler that the pointer is properly aligned. But according to
https://github.com/llvm/llvm-project/issues/69146 it seems like the Clang
folks don't see an easy fix on their side and recommend to use a type
declared with __attribute__((aligned(16))) to work around this problem.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1934
Message-ID: <20231108085954.313071-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pylint warns:
tests/qapi-schema/test-qapi.py:139:13: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
tests/qapi-schema/test-qapi.py:143:13: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
Add encoding='utf-8'.
Pylint advises:
tests/qapi-schema/test-qapi.py:143:13: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
Silence this by returning the value directly.
Pylint advises:
tests/qapi-schema/test-qapi.py:221:4: R1722: Consider using sys.exit() (consider-using-sys-exit)
tests/qapi-schema/test-qapi.py:226:4: R1722: Consider using sys.exit() (consider-using-sys-exit)
Sure, why not.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231025092925.1785934-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Pylint advises:
docs/sphinx/qapidoc.py:518:12: W0707: Consider explicitly re-raising using 'raise ExtensionError(str(err)) from err' (raise-missing-from)
>From its manual:
Python's exception chaining shows the traceback of the current
exception, but also of the original exception. When you raise a
new exception after another exception was caught it's likely that
the second exception is a friendly re-wrapping of the first
exception. In such cases `raise from` provides a better link
between the two tracebacks in the final error.
Makes sense, so do it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231025092159.1782638-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: commit bbde656263 (migration/rdma: Fix save_page method to
fail on polling error).
Enable -Wshadow=local to prevent such issues. Possible thanks to
recent cleanups. Enabling -Wshadow would prevent more issues, but
we're not yet ready for that.
As usual, the warning is only enabled when the compiler recognizes it.
GCC does, Clang doesn't.
Some shadowed locals remain in bsd-user. Since BSD prefers Clang,
let's not wait for its cleanup.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231026053115.2066744-2-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When running with "dynamic-memslots=off", we enter
virtio_mem_activate_memslots_to_plug() to return immediately again
because "vmem->dynamic_memslots == false". However, the compiler might
not optimize out calculating start_idx+end_idx, where we divide by
vmem->memslot_size. In such a configuration, the memslot size is 0 and
we'll get a division by zero:
(qemu) qom-set vmem0 requested-size 3G
(qemu) q35.sh: line 38: 622940 Floating point exception(core dumped)
The same is true for virtio_mem_deactivate_unplugged_memslots(), however
we never really reach that code without a prior
virtio_mem_activate_memslots_to_plug() call.
Let's fix it by simply calling these functions only with
"dynamic-memslots=on".
This was found when using a debug build of QEMU.
Message-ID: <20231023111341.219317-1-david@redhat.com>
Reprted-by: Mario Casquero <mcasquer@redhat.com>
Fixes: 177f9b1ee4 ("virtio-mem: Expose device memory dynamically via multiple memslots if enabled")
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
The Intel 82576EB GbE Controller say that the Physical and Virtual
Functions support Function Level Reset. Add the capability to the PF
device model using device property "x-pcie-flr-init" which is "on" by
default and "off" for machines <= 8.1 to preserve compatibility.
The FLR capability of the VF model is defined according to the FLR
property of the PF, this to avoid adding an extra compatibility
property.
Cc: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
No need to declare a new variable in the the inner code block
here, we can re-use the "ret" variable that has been declared
at the beginning of the function. With this change, the code
can now be successfully compiled with -Wshadow=local again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231023175038.111607-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The system mask is a restricted subset of the psw, with only
a couple of reserved bits. It is better to handle this up
front in the translator than require helper_swap_system_mask
to use cpu_hppa_get_psw and cpu_hppa_put_psw.
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Handle this in expand_sm_imm not helper_swap_system_mask.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qdev: Make array properties user accessible again
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmVOZicRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9arpw/+NKGRhSMrSq9Az+z5+ANUfw5SNLJYf1hH
# jm5ITA1Gr9htqHtBfEOdkms2wef6m7onF72rHVUlBKdqCPNMGLme5B0oQ8PZ1X1t
# OxAZ8KYwlO98QvOYl617SA/8wxc0U4/zi192kJpbRkKF6KdbbMGtLKjHyEitA/Yv
# izx1vkKOgQyMFGF1JgIyG4R3WmsKQW1XLqb3emVNRzCqmJpkvMJZQG8tnyEAXlIS
# gkY69cTpaKVaM1OxdB45gjlKTGzLWC/3tTGH+u8q356fvgm/QIgrokCirCZFPIl0
# C8hvzPm/L8hkvWtUb3EZx0DLiunWcAGvoLgBNODHojKRtQ6X9TRTrjJ41ZCLXVqv
# tVJm+XGKC0CZ/WW5yqVOmnzfPH4z8ubzSoRv5ryz3xDb5B/Zr10+ScE+/Ee24wJ2
# HIehxc1LgVGGpikP88/Ns/nAlIVUQxxYvSJ23R5D1+UpP6FCy6Y1pKyRtZGzPCIe
# N4Y+52GtelBR8gOjay5INn/Yf8Fh6sFxX556BW0XKYcbQgvl2bxASe/KVnAVZ1NB
# 8DsaAWlK+hPGopwyp2lDRuGd4kusNbzQvIUZ0mr1g9HQ/iSnT/9RFdExsj+K6QTr
# pX42QCe4mWHPAKx38cez+Bhx4TEOw+GmHuTp/oLdBRuY8DPu/I0Ny364uiW+At/R
# 8jF+jt5uVZc=
# =MV6O
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 11 Nov 2023 01:19:35 HKT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'qdev-array-prop' of https://repo.or.cz/qemu/kevin:
qdev: Rework array properties based on list visitor
qdev: Make netdev properties work as list elements
qom: Add object_property_set_default_list()
hw/rx/rx62n: Use qdev_prop_set_array()
hw/arm/xlnx-versal: Use qdev_prop_set_array()
hw/arm/virt: Use qdev_prop_set_array()
hw/arm/vexpress: Use qdev_prop_set_array()
hw/arm/sbsa-ref: Use qdev_prop_set_array()
hw/arm/mps2: Use qdev_prop_set_array()
hw/arm/mps2-tz: Use qdev_prop_set_array()
hw/i386/pc: Use qdev_prop_set_array()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-11 11:23:25 +08:00
520 changed files with 11040 additions and 7220 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
