Compare commits

..

79 Commits

Author SHA1 Message Date
Michael Roth
fcf75ad007 Update version for 2.6.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-17 10:24:53 -05:00
Gonglei
5125bef25a timer: set vm_clock disabled default
(commit 80dcfb8532)
Upon migration, the code use a timer based on vm_clock for 1ns
in the future from post_load to do the event send in case host_connected
differs between migration source and target.

However, it's not guaranteed that the apic is ready to inject irqs into
the guest, and the irq line remained high, resulting in any future interrupts
going unnoticed by the guest as well.

That's because 1) the migration coroutine is not blocked when it get EAGAIN
while reading QEMUFile. 2) The vm_clock is enabled default currently, it doesn't
rely on the calling of vm_start(), that means vm_clock timers can run before
VCPUs are running.

So, let's set the vm_clock disabled default, keep the initial intention of
design for vm_clock timers.

Meanwhile, change the test-aio usecase, using QEMU_CLOCK_REALTIME instead of
QEMU_CLOCK_VIRTUAL as the block code does.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1470728955-90600-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 3fdd0ee393)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-15 08:57:36 -05:00
Bruce Rogers
beeff749f6 Xen PCI passthrough: fix passthrough failure when no interrupt pin
Commit 5a11d0f7 mistakenly converted a log message into an error
condition when no pin interrupt is found for the pci device being
passed through. Revert that part of the commit.

Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
(cherry picked from commit 0968c91ce0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-15 08:57:24 -05:00
Laurent Vivier
1f1b96a1df ppc64: fix compressed dump with pseries kernel
If we don't provide the page size in target-ppc:cpu_get_dump_info(),
the default one (TARGET_PAGE_SIZE, 4KB) is used to create
the compressed dump. It works fine with Macintosh, but not with
pseries as the kernel default page size is 64KB.

Without this patch, if we generate a compressed dump in the QEMU monitor:

    (qemu) dump-guest-memory -z qemu.dump

This dump cannot be read by crash:

    # crash vmlinux qemu.dump
    ...
    WARNING: cannot translate vmemmap kernel virtual addresses:
             commands requiring page structure contents will fail
    ...

Page_size is used to determine the dumpfile's block size. The
block size needs to be at least the page size, but a multiple of page
size works fine too. For PPC64, linux supports either 4KB or 64KB software
page size. So we define the page_size to 64KB.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 760d88d1d0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-15 08:55:58 -05:00
Prasad J Pandit
236039b89d scsi: esp: check TI buffer index before read/write
The 53C9X Fast SCSI Controller(FSC) comes with internal 16-byte
FIFO buffers. One is used to handle commands and other is for
information transfer. Three control variables 'ti_rptr',
'ti_wptr' and 'ti_size' are used to control r/w access to the
information transfer buffer ti_buf[TI_BUFSZ=16]. In that,

'ti_rptr' is used as read index, where read occurs.
'ti_wptr' is a write index, where write would occur.
'ti_size' indicates total bytes to be read from the buffer.

While reading/writing to this buffer, index could exceed its
size. Add check to avoid OOB r/w access.

Reported-by: Huawei PSIRT <psirt@huawei.com>
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1465230883-22303-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit ff589551c8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 16:01:08 -05:00
Prasad J Pandit
407fb6fce9 scsi: megasas: null terminate bios version buffer
While reading information via 'megasas_ctrl_get_info' routine,
a local bios version buffer isn't null terminated. Add the
terminating null byte to avoid any OOB access.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 844864fbae)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:31:33 -05:00
Prasad J Pandit
27fa5e735a scsi: esp: make cmdbuf big enough for maximum CDB size
While doing DMA read into ESP command buffer 's->cmdbuf', it could
write past the 's->cmdbuf' area, if it was transferring more than 16
bytes.  Increase the command buffer size to 32, which is maximum when
's->do_cmd' is set, and add a check on 'len' to avoid OOB access.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 926cde5f3e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:31:04 -05:00
Paolo Bonzini
8c04a291c9 scsi: esp: clean up handle_ti/esp_do_dma if s->do_cmd
Avoid duplicated code between esp_do_dma and handle_ti.  esp_do_dma
has the same code that handle_ti contains after the call to esp_do_dma;
but the code in handle_ti is never reached because it is in an "else if".
Remove the else and also the pointless return.

esp_do_dma also has a partially dead assignment of the to_device
variable.  Sink it to the point where it's actually used.

Finally, assert that the other caller of esp_do_dma (esp_transfer_data)
only transfers data and not a command.  This is true because get_cmd
cancels the old request synchronously before its caller handle_satn_stop
sets do_cmd to 1.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7f0b6e114a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:30:50 -05:00
Paolo Bonzini
aa6905db96 scsi: esp: respect FIFO invariant after message phase
The FIFO contains two bytes; hence the write ptr should be two bytes ahead
of the read pointer.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d020aa504c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:30:39 -05:00
Prasad J Pandit
e5c4e642be scsi: esp: check buffer length before reading scsi command
The 53C9X Fast SCSI Controller(FSC) comes with an internal 16-byte
FIFO buffer. It is used to handle command and data transfer.
Routine get_cmd() in non-DMA mode, uses 'ti_size' to read scsi
command into a buffer. Add check to validate command length against
buffer size to avoid any overrun.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464717207-7549-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d3cdc49138)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:30:23 -05:00
Prasad J Pandit
80eb9b8c44 scsi: megasas: check 'read_queue_head' index value
While doing MegaRAID SAS controller command frame lookup, routine
'megasas_lookup_frame' uses 'read_queue_head' value as an index
into 'frames[MEGASAS_MAX_FRAMES=2048]' array. Limit its value
within array bounds to avoid any OOB access.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464179110-18593-1-git-send-email-ppandit@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b60bdd1f1e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:30:08 -05:00
Prasad J Pandit
19dcd481ac scsi: megasas: initialise local configuration data buffer
When reading MegaRAID SAS controller configuration via MegaRAID
Firmware Interface(MFI) commands, routine megasas_dcmd_cfg_read
uses an uninitialised local data buffer. Initialise this buffer
to avoid stack information leakage.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464178304-12831-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d37af74073)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:29:51 -05:00
Prasad J Pandit
1467b936d9 scsi: megasas: use appropriate property buffer size
When setting MegaRAID SAS controller properties via MegaRAID
Firmware Interface(MFI) commands, a user supplied size parameter
is used to set property value. Use appropriate size value to avoid
OOB access issues.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464172291-2856-2-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1b85898025)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:28:56 -05:00
Prasad J Pandit
7a2c32ec06 net: mipsnet: check packet length against buffer
When receiving packets over MIPSnet network device, it uses
receive buffer of size 1514 bytes. In case the controller
accepts large(MTU) packets, it could lead to memory corruption.
Add check to avoid it.

Reported by: Oleksandr Bazhaniuk <oleksandr.bazhaniuk@intel.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

(cherry picked from commit 3af9187fc6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:28:45 -05:00
Cole Robinson
780d8317c8 hw/arm/virt: Reject gic-version=host for non-KVM
If you try to gic-version=host with TCG on a KVM aarch64 host,
qemu segfaults, since host requires KVM APIs.

Explicitly reject gic-version=host if KVM is not enabled

https://bugzilla.redhat.com/show_bug.cgi?id=1339977
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: b1b3b0dd143b7995a7f4062966b80a2cf3e3c71e.1464273085.git.crobinso@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 0bf8039dca)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:28:21 -05:00
Cole Robinson
c5ba71b6b9 ui: spice: Exit if gl=on EGL init fails
The user explicitly requested spice GL, so if we know it isn't
going to work we should exit

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: e3789e35b16f9e3cc6f2652f91c52d88ba6d6936.1463588606.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit daafc661cc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:27:59 -05:00
Gerd Hoffmann
84da2c6701 sdl2: skip init without outputs
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
Message-id: 1464790116-32405-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 8efa5f29f8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:27:37 -05:00
Cole Robinson
ccecdf758d ui: sdl2: Release grab before opening console window
sdl 2.0.4 currently has a bug which causes our UI shortcuts to fire
rapidly in succession:

  https://bugzilla.libsdl.org/show_bug.cgi?id=3287

It's a toss up whether ctrl+alt+f or ctrl+alt+2 will fire an
odd or even number of times, thus determining whether the action
succeeds or fails.

Opening monitor/serial windows is doubly broken, since it will often
lock the UI trying to grab the pointer:

  0x00007fffef3720a5 in SDL_Delay_REAL () at /lib64/libSDL2-2.0.so.0
  0x00007fffef3688ba in X11_SetWindowGrab () at /lib64/libSDL2-2.0.so.0
  0x00007fffef2f2da7 in SDL_SendWindowEvent () at /lib64/libSDL2-2.0.so.0
  0x00007fffef2f080b in SDL_SetKeyboardFocus () at /lib64/libSDL2-2.0.so.0
  0x00007fffef35d784 in X11_DispatchFocusIn.isra.8 () at /lib64/libSDL2-2.0.so.0
  0x00007fffef35dbce in X11_DispatchEvent () at /lib64/libSDL2-2.0.so.0
  0x00007fffef35ee4a in X11_PumpEvents () at /lib64/libSDL2-2.0.so.0
  0x00007fffef2eea6a in SDL_PumpEvents_REAL () at /lib64/libSDL2-2.0.so.0
  0x00007fffef2eeab5 in SDL_WaitEventTimeout_REAL () at /lib64/libSDL2-2.0.so.0
  0x000055555597eed0 in sdl2_poll_events (scon=0x55555876f928) at ui/sdl2.c:593

We can work around that hang by ungrabbing the pointer before launching
a new window. This roughly matches what our sdl1 code does

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: 31c9ab6540b031f7a614c59edcecea9877685612.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 56f289f383)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:25:57 -05:00
Cole Robinson
0f9745afaa ui: gtk: fix crash when terminal inner-border is NULL
VTE terminal inner-border can be NULL. The vte-0.36 (API 2.90)
code checks for the condition too so I assume it's not just a bug

Fixes a crash on Fedora 24 with gtk 3.20

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: 2b2e85d403e8760ea53afd735a170500d5c17716.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 4fd811a6bd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:25:53 -05:00
Marc-André Lureau
94c8340d93 ahci: free irqs array
Each irq is referenced by the IDEBus in ide_init2(), thus we can free
the no longer used array.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 9d324b0e67)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:25:31 -05:00
Marc-André Lureau
3d34297e9c ahci: fix sglist leak on retry
ahci-test /x86_64/ahci/io/dma/lba28/retry triggers the following leak:

Direct leak of 16 byte(s) in 1 object(s) allocated from:
    #0 0x7fc4b2a25e20 in malloc (/lib64/libasan.so.3+0xc6e20)
    #1 0x7fc4993bce58 in g_malloc (/lib64/libglib-2.0.so.0+0x4ee58)
    #2 0x556a187d4b34 in ahci_populate_sglist hw/ide/ahci.c:896
    #3 0x556a187d8237 in ahci_dma_prepare_buf hw/ide/ahci.c:1367
    #4 0x556a187b5a1a in ide_dma_cb hw/ide/core.c:844
    #5 0x556a187d7eec in ahci_start_dma hw/ide/ahci.c:1333
    #6 0x556a187b650b in ide_start_dma hw/ide/core.c:921
    #7 0x556a187b61e6 in ide_sector_start_dma hw/ide/core.c:911
    #8 0x556a187b9e26 in cmd_write_dma hw/ide/core.c:1486
    #9 0x556a187bd519 in ide_exec_cmd hw/ide/core.c:2027
    #10 0x556a187d71c5 in handle_reg_h2d_fis hw/ide/ahci.c:1204
    #11 0x556a187d7681 in handle_cmd hw/ide/ahci.c:1254
    #12 0x556a187d168a in check_cmd hw/ide/ahci.c:510
    #13 0x556a187d0afc in ahci_port_write hw/ide/ahci.c:314
    #14 0x556a187d105d in ahci_mem_write hw/ide/ahci.c:435
    #15 0x556a1831d959 in memory_region_write_accessor /home/elmarco/src/qemu/memory.c:525
    #16 0x556a1831dc35 in access_with_adjusted_size /home/elmarco/src/qemu/memory.c:591
    #17 0x556a18323ce3 in memory_region_dispatch_write /home/elmarco/src/qemu/memory.c:1262
    #18 0x556a1828cf67 in address_space_write_continue /home/elmarco/src/qemu/exec.c:2578
    #19 0x556a1828d20b in address_space_write /home/elmarco/src/qemu/exec.c:2635
    #20 0x556a1828d92b in address_space_rw /home/elmarco/src/qemu/exec.c:2737
    #21 0x556a1828daf7 in cpu_physical_memory_rw /home/elmarco/src/qemu/exec.c:2746
    #22 0x556a183068d3 in cpu_physical_memory_write /home/elmarco/src/qemu/include/exec/cpu-common.h:72
    #23 0x556a18308194 in qtest_process_command /home/elmarco/src/qemu/qtest.c:382
    #24 0x556a18309999 in qtest_process_inbuf /home/elmarco/src/qemu/qtest.c:573
    #25 0x556a18309a4a in qtest_read /home/elmarco/src/qemu/qtest.c:585
    #26 0x556a18598b85 in qemu_chr_be_write_impl /home/elmarco/src/qemu/qemu-char.c:387
    #27 0x556a18598c52 in qemu_chr_be_write /home/elmarco/src/qemu/qemu-char.c:399
    #28 0x556a185a2afa in tcp_chr_read /home/elmarco/src/qemu/qemu-char.c:2902
    #29 0x556a18cbaf52 in qio_channel_fd_source_dispatch io/channel-watch.c:84

Follow John Snow recommendation:
  Everywhere else ncq_err is used, it is accompanied by a list cleanup
  except for ncq_cb, which is the case you are fixing here.

  Move the sglist destruction inside of ncq_err and then delete it from
  the other two locations to keep it tidy.

  Call dma_buf_commit in ide_dma_cb after the early return. Though, this
  is also a little wonky because this routine does more than clear the
  list, but it is at the moment the centralized "we're done with the
  sglist" function and none of the other side effects that occur in
  dma_buf_commit will interfere with the reset that occurs from
  ide_restart_bh, I think

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 5839df7b71)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:25:23 -05:00
Mark Cave-Ayland
ff71767e06 macio: set res_count value to 0 after non-block ATAPI DMA transfers
res_count should be set to the number of outstanding bytes after a DBDMA
request. Unfortunately this wasn't being set to zero by the non-block
transfer codepath meaning drivers that checked the descriptor result for
such requests (e.g reading the CDROM TOC) would assume from a non-zero result
that the transfer had failed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

(cherry picked from commit 16275edb34)
Conflicts:
	hw/ide/macio.c

* removed context dependancy on ddd495e5

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:24:25 -05:00
John Snow
ec211e7426 atapi: fix halted DMA reset
Followup to 87ac25fd, this time for ATAPI DMA.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1470164128-28158-1-git-send-email-jsnow@redhat.com
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 7f951b2d77)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:16:18 -05:00
John Snow
16a87c4a5d ide: fix halted IO segfault at reset
If one attempts to perform a system_reset after a failed IO request
that causes the VM to enter a paused state, QEMU will segfault trying
to free up the pending IO requests.

These requests have already been completed and freed, though, so all
we need to do is NULL them before we enter the paused state.

Existing AHCI tests verify that halted requests are still resumed
successfully after a STOP event.

Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1469635201-11918-2-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 87ac25fd1f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:59:20 -05:00
Stefan Hajnoczi
86cc089aa7 virtio: error out if guest exceeds virtqueue size
A broken or malicious guest can submit more requests than the virtqueue
size permits, causing unbounded memory allocation in QEMU.

The guest can submit requests without bothering to wait for completion
and is therefore not bound by virtqueue size.  This requires reusing
vring descriptors in more than one request, which is not allowed by the
VIRTIO 1.0 specification.

In "3.2.1 Supplying Buffers to The Device", the VIRTIO 1.0 specification
says:

  1. The driver places the buffer into free descriptor(s) in the
     descriptor table, chaining as necessary

and

  Note that the above code does not take precautions against the
  available ring buffer wrapping around: this is not possible since the
  ring buffer is the same size as the descriptor table, so step (1) will
  prevent such a condition.

This implies that placing more buffers into the virtqueue than the
descriptor table size is not allowed.

QEMU is missing the check to prevent this case.  Processing a request
allocates a VirtQueueElement leading to unbounded memory allocation
controlled by the guest.

Exit with an error if the guest provides more requests than the
virtqueue size permits.  This bounds memory allocation and makes the
buggy guest visible to the user.

This patch fixes CVE-2016-5403 and was reported by Zhenhao Hong from 360
Marvel Team, China.

Reported-by: Zhenhao Hong <hongzhenhao@360.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit afd9096eb1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:56:53 -05:00
Dave Hansen
502c8e86ea target-i386: fix typo in xsetbv implementation
QEMU 2.6 added support for the XSAVE family of instructions, which
includes the XSETBV instruction which allows setting the XCR0
register.

But, when booting Linux kernels with XSAVE support enabled, I was
getting very early crashes where the instruction pointer was set
to 0x3.  I tracked it down to a jump instruction generated by this:

        gen_jmp_im(s->pc - pc_start);

where s->pc is pointing to the instruction after XSETBV and pc_start
is pointing _at_ XSETBV.  Subtract the two and you get 0x3.  Whoops.

The fix is to replace this typo with the pattern found everywhere
else in the file when folks want to end the translation buffer.

Richard Henderson confirmed that this is a bug and that this is the
correct fix.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: qemu-stable@nongnu.org
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit ba03584f4f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:56:11 -05:00
Michael S. Tsirkin
a87cef825a pcie: fix link active status bit migration
We changed link status register in pci express endpoint capability
over time. Specifically,

commit b2101eae63 ("pcie: Set the "link
active" in the link status register") set data link layer link active
bit in this register without adding compatibility to old machine types.

When migrating from qemu 2.3 and older this affects xhci devices which
under machine type 2.0 and older have a pci express endpoint capability
even if they are on a pci bus.

Add compatibility flags to make this bit value match what it was under
2.3.

Additionally, to avoid breaking migration from qemu 2.3 and up,
suppress checking link status during migration: this seems sane
since hardware can change link status at any time.

https://bugzilla.redhat.com/show_bug.cgi?id=1352860

Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: b2101eae63
    ("pcie: Set the "link active" in the link status register")
Cc: qemu-stable@nongnu.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit 6b4495401b)
Conflicts:
	hw/pci/pcie.c

* removed functional dependency on 6383292

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:45:19 -05:00
Eric Blake
97b5a97f2f nbd: Limit nbdflags to 16 bits
Rather than asserting that nbdflags is within range, just give
it the correct type to begin with :)  nbdflags corresponds to
the per-export portion of NBD Protocol "transmission flags", which
is 16 bits in response to NBD_OPT_EXPORT_NAME and NBD_OPT_GO.

Furthermore, upstream NBD has never passed the global flags to
the kernel via ioctl(NBD_SET_FLAGS) (the ioctl was first
introduced in NBD 2.9.22; then a latent bug in NBD 3.1 actually
tried to OR the global flags with the transmission flags, with
the disaster that the addition of NBD_FLAG_NO_ZEROES in 3.9
caused all earlier NBD 3.x clients to treat every export as
read-only; NBD 3.10 and later intentionally clip things to 16
bits to pass only transmission flags).  Qemu should follow suit,
since the current two global flags (NBD_FLAG_FIXED_NEWSTYLE
and NBD_FLAG_NO_ZEROES) have no impact on the kernel's behavior
during transmission.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>

Message-Id: <1469129688-22848-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7423f41782)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:19:20 -05:00
Peter Maydell
2317b328bc nbd: Don't use *_to_cpup() functions
The *_to_cpup() functions are not very useful, as they simply do
a pointer dereference and then a *_to_cpu(). Instead use either:
 * ld*_*_p(), if the data is at an address that might not be
   correctly aligned for the load
 * a local dereference and *_to_cpu(), if the pointer is
   the correct type and known to be correctly aligned

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1465570836-22211-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 773dce3c72)
* context prereq for 7423f417
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:19:04 -05:00
Eric Blake
ce00e529bc nbd: More debug typo fixes, use correct formats
Clean up some debug message oddities missed earlier; this includes
some typos, and recognizing that %d is not necessarily compatible
with uint32_t. Also add a couple messages that I found useful
while debugging things.

Signed-off-by: Eric Blake <eblake@redhat.com>

Message-Id: <1463006384-7734-3-git-send-email-eblake@redhat.com>
[Do not use PRIx16, clang complains. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

(cherry picked from commit 2cb347493c)
* context prereq for 7423f41
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:15:11 -05:00
Stefan Weil
28eae0af65 Fix some typos found by codespell
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit cb8d4c8f54)
* context prereq for 2cb34749
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:14:47 -05:00
Peter Lieven
5634eb8ffb block/iscsi: fix rounding in iscsi_allocationmap_set
when setting clusters as alloacted the boundaries have
to be expanded. As Paolo pointed out the calculation of
the number of clusters is wrong:

Suppose cluster_sectors is 2, sector_num = 1, nb_sectors = 6:

In the "mark allocated" case, you want to set 0..8, i.e.
cluster_num=0, nb_clusters=4.

   0--.--2--.--4--.--6--.--8
   <--|_________________|-->  (<--> = expanded)

Instead you are setting nb_clusters=3, so that 6..8 is not marked.

   0--.--2--.--4--.--6--.--8
   <--|______________|!!!     (! = wrong)

Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468831940-15556-2-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit eb36b953e0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:03:41 -05:00
Fam Zheng
b6ece2c6f3 util: Fix MIN_NON_ZERO
MIN_NON_ZERO(1, 0) is evaluated to 0. Rewrite the macro to fix it.

Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1468306113-847-1-git-send-email-famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d27ba624aa)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:03:16 -05:00
Alberto Garcia
8d7d7764d5 qemu-iotests: Test naming of throttling groups
Throttling groups are named using the 'group' parameter of the
block_set_io_throttle command and the throttling.group command-line
option. If that parameter is unspecified the groups get the name of
the block device.

This patch adds a new test to check the naming of throttling groups.

Signed-off-by: Alberto Garcia <berto@igalia.com>
* backport of 435d5ee
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:01:24 -05:00
Alberto Garcia
704ab2fce4 blockdev: Fix regression with the default naming of throttling groups
When I/O limits are set for a block device, the name of the throttling
group is taken from the BlockBackend if the user doesn't specify one.

Commit efaa7c4eeb moved the naming of the BlockBackend in
blockdev_init() to the end of the function, after I/O limits are set.
The consequence is that the throttling group gets an empty name.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-stable@nongnu.org
* backport of ff356ee
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:01:21 -05:00
David Hildenbrand
025c4e39f4 s390x/ipl: fix reboots for migration from different bios
When migrating from a different QEMU version, the start_address and
bios_start_address may differ. During migration these values are migrated
and overwrite the values that were detected by QEMU itself.

On a reboot, QEMU will reload its own BIOS, but use the migrated start
addresses, which does not work if the values differ.

Fix this by not relying on the migrated values anymore, but still
provide them during migration, so existing QEMUs continue to work.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit bb0995468a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:26:37 -05:00
Michael S. Tsirkin
82c8516779 Revert "virtio-net: unbreak self announcement and guest offloads after migration"
This reverts commit 1f8828ef57.

Cc: qemu-stable@nongnu.org
Reported-by: Robin Geuze <robing@transip.nl>
Tested-by: Robin Geuze <robing@transip.nl>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 6c6668232e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:23:40 -05:00
Michael S. Tsirkin
909d87d347 virtio: set low features early on load
virtio migrates the low 32 feature bits twice, the first copy is there
for compatibility but ever since
019a3edbb2: ("virtio: make features 64bit
wide") it's ignored on load. This is wrong since virtio_net_load tests
self announcement and guest offloads before the second copy including
high feature bits is loaded.  This means that self announcement, control
vq and guest offloads are all broken after migration.

Fix it up by loading low feature bits: somewhat ugly since high and low
bits become out of sync temporarily, but seems unavoidable for
compatibility.  The right thing to do for new features is probably to
test the host features, anyway.

Fixes: 019a3edbb2
    ("virtio: make features 64bit wide")
Cc: qemu-stable@nongnu.org
Reported-by: Robin Geuze <robing@transip.nl>
Tested-by: Robin Geuze <robing@transip.nl>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit 62cee1a28a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:23:27 -05:00
Artyom Tarasenko
9566ceeef4 target-sparc: fix register corruption in ldstub if there is no write permission
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
(cherry picked from commit b64d2e57e7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:10:07 -05:00
Eric Blake
44152ece75 scsi: Advertise limits by blocksize, not 512
s->blocksize may be larger than 512, in which case our
tweaks to max_xfer_len and opt_xfer_len must be scaled
appropriately.

CC: qemu-stable@nongnu.org
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit efaf4781a9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:09:13 -05:00
Fam Zheng
c9fb07ba56 scsi-generic: Merge block max xfer len in INQUIRY response
The rationale is similar to the above mode sense response interception:
this is practically the only channel to communicate restraints from
elsewhere such as host and block driver.

The scsi bus we attach onto can have a larger max xfer len than what is
accepted by the host file system (guarding between the host scsi LUN and
QEMU), in which case the SG_IO we generate would get -EINVAL.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464243305-10661-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 063143d5b1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:08:54 -05:00
Eric Blake
ab2aac59e8 nbd: Allow larger requests
The NBD layer was breaking up request at a limit of 2040 sectors
(just under 1M) to cater to old qemu-nbd. But the server limit
was raised to 32M in commit 2d8214885 to match the kernel, more
than three years ago; and the upstream NBD Protocol is proposing
documentation that without any explicit communication to state
otherwise, a client should be able to safely assume that a 32M
transaction will work.  It is time to rely on the larger sizing,
and any downstream distro that cares about maximum
interoperability to older qemu-nbd servers can just tweak the
value of #define NBD_MAX_SECTORS.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

(cherry picked from commit 476b923c32)
Conflicts:
	include/block/nbd.h

* removed context dependency on 943cec86

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 14:34:45 -05:00
Alex Williamson
e19b9ad27c vfio/pci: Fix VGA quirks
Commit 2d82f8a3cd ("vfio/pci: Convert all MemoryRegion to dynamic
alloc and consistent functions") converted VFIOPCIDevice.vga to be
dynamically allocted, negating the need for VFIOPCIDevice.has_vga.
Unfortunately not all of the has_vga users were converted, nor was
the field removed from the structure.  Correct these oversights.

Reported-by: Peter Maloney <peter.maloney@brockmann-consult.de>
Tested-by: Peter Maloney <peter.maloney@brockmann-consult.de>
Fixes: 2d82f8a3cd ("vfio/pci: Convert all MemoryRegion to dynamic alloc and consistent functions")
Fixes: https://bugs.launchpad.net/qemu/+bug/1591628
Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
(cherry picked from commit 4d3fc4fdc6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 14:30:32 -05:00
4f696c8533 pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c
In function pci_assign_dev_load_option_rom, For those pci devices don't
have 'rom' file under sysfs or if loading ROM from external file, The
function returns NULL, and won't set the passed 'size' variable.

In these 2 cases, qemu still reports "Invalid ROM" error message, Users
may be confused by it.

Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <1466010327-22368-1-git-send-email-lma@suse.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit be968c721e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 14:29:49 -05:00
Eric Blake
a50bb5fd5f qapi: Fix crash on missing alternate member of QAPI struct
If a QAPI struct has a mandatory alternate member which is not
present on input, the input visitor reports an error for the
missing alternate without setting the discriminator, but the
cleanup code for the struct still tries to use the dealloc
visitor to clean up the alternate.

Commit dbf11922 changed visit_start_alternate to set *obj to NULL
when an error occurs, where it was previously left untouched.
Thus, before the patch, the dealloc visitor is blindly trying to
cleanup whatever branch corresponds to (*obj)->type == 0 (that is,
QTYPE_NONE, because *obj still pointed to zeroed memory), which
selects the default branch of the switch and sets an error, but
this second error is ignored by the way the dealloc visitor is
used; but after the patch, the attempt to switch dereferences NULL.

When cleaning up after a partial object parse, we specifically
check for !*obj after visit_start_struct() (see gen_visit_object());
doing the same for alternates fixes the crash. Enhance the testsuite
to give coverage for both missing struct and missing alternate
members.

Also add an abort - we expect visit_start_alternate() to either set an
error or to set (*obj)->type to a valid QType that corresponds to
actual user input, and QTYPE_NONE should never be reachable from valid
input.  Had the abort() been in place earlier, we might have noticed
the dealloc visitor dereferencing bogus zeroed memory prior to when
commit dbf11922 forced our hand by setting *obj to NULL and causing a
fault.

Test case:

{'execute':'blockdev-add', 'arguments':{'options':{'driver':'raw'}}}

The choice of 'driver':'raw' selects a BlockdevOptionsGenericFormat
struct, which has a mandatory 'file':'BlockdevRef' in QAPI.  Since
'file' is missing as a sibling of 'driver', this should report a
graceful error rather than fault.  After this patch, we are back to:

{"error": {"class": "GenericError", "desc": "Parameter 'file' is missing"}}

Generated code in qapi-visit.c changes as:

|@@ -2444,6 +2444,9 @@ void visit_type_BlockdevRef(Visitor *v,
|     if (err) {
|         goto out;
|     }
|+    if (!*obj) {
|+        goto out_obj;
|+    }
|     switch ((*obj)->type) {
|     case QTYPE_QDICT:
|         visit_start_struct(v, name, NULL, 0, &err);
|@@ -2459,10 +2462,13 @@ void visit_type_BlockdevRef(Visitor *v,
|     case QTYPE_QSTRING:
|         visit_type_str(v, name, &(*obj)->u.reference, &err);
|         break;
|+    case QTYPE_NONE:
|+        abort();
|     default:
|         error_setg(&err, QERR_INVALID_PARAMETER_TYPE, name ? name : "null",
|                    "BlockdevRef");
|     }
|+out_obj:
|     visit_end_alternate(v);

Reported by Kashyap Chamarthy <kchamart@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1466012271-5204-1-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

(cherry picked from commit 9b4e38fe6a)
Conflicts:
	tests/test-qmp-input-visitor.c

* removed contexual/functional dependencies on 68ab47e

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 14:28:18 -05:00
Max Reitz
4bfe16ba7b qcow2: Avoid making the L1 table too big
We refuse to open images whose L1 table we deem "too big". Consequently,
we should not produce such images ourselves.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160615153630.2116-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Added QEMU_BUILD_BUG_ON()]
Signed-off-by: Max Reitz <mreitz@redhat.com>

(cherry picked from commit 84c26520d3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:55:23 -05:00
Kevin Wolf
683c1c5ea5 backup: Don't leak BackupBlockJob in error path
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
(cherry picked from commit 91ab688379)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:54:51 -05:00
Peter Lieven
45f4e4be09 net: fix qemu_announce_self not emitting packets
commit fefe2a78 accidently dropped the code path for injecting
raw packets. This feature is needed for sending gratuitous ARPs
after an incoming migration has completed. The result is increased
network downtime for vservers where the network card is not virtio-net
with the VIRTIO_NET_F_GUEST_ANNOUNCE feature.

Fixes: fefe2a78ab
Cc: qemu-stable@nongnu.org
Cc: hongyang.yang@easystack.cn
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit ca1ee3d6b5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:45:18 -05:00
Daniel P. Berrange
d1911a6fa7 ui: fix regression in printing VNC host/port on startup
If VNC is chosen as the compile time default display backend,
QEMU will print the host/port it listens on at startup.
Previously this would look like

  VNC server running on '::1:5900'

but in 04d2529da2 the ':' was
accidentally replaced with a ';'. This the ':' back.

Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1465382576-25552-1-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 83cf07b0b5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:44:54 -05:00
Daniel P. Berrange
510531ea44 io: remove mistaken call to object_ref on QTask
The QTask struct is just a standalone struct, not a QOM Object,
so calling object_ref() on it is not appropriate. This results
in mangling the 'destroy' field in the QTask struct, causing
the later call to qtask_free() to try to call the function
at address 0x1, with predictably segfault happy results.

There is in fact no need for ref counting with QTask, as the
call to qtask_abort() or qtask_complete() will automatically
free associated memory.

This fixes the crash shown in

  https://bugs.launchpad.net/qemu/+bug/1589923

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit bc35d51077)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:44:29 -05:00
Gerd Hoffmann
d59d37dea4 vmsvga: don't process more than 1024 fifo commands at once
vmsvga_fifo_run is called in regular intervals (on each display update)
and will resume where it left off.  So we can simply exit the loop,
without having to worry about how processing will continue.

Fixes: CVE-2016-4453
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-5-git-send-email-kraxel@redhat.com
(cherry picked from commit 4e68a0ee17)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:37:49 -05:00
Gerd Hoffmann
71798fda8b vmsvga: shadow fifo registers
The fifo is normal ram.  So kvm vcpu threads and qemu iothread can
access the fifo in parallel without syncronization.  Which in turn
implies we can't use the fifo pointers in-place because the guest
can try changing them underneath us.  So add shadows for them, to
make sure the guest can't modify them after we've applied sanity
checks.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-4-git-send-email-kraxel@redhat.com
(cherry picked from commit 7e486f7577)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:37:40 -05:00
Gerd Hoffmann
3141be668f vmsvga: add more fifo checks
Make sure all fifo ptrs are within range.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-3-git-send-email-kraxel@redhat.com
(cherry picked from commit c2e3c54d39)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:37:21 -05:00
Gerd Hoffmann
394647d711 vmsvga: move fifo sanity checks to vmsvga_fifo_length
Sanity checks are applied when the fifo is enabled by the guest
(SVGA_REG_CONFIG_DONE write).  Which doesn't help much if the guest
changes the fifo registers afterwards.  Move the checks to
vmsvga_fifo_length so they are done each time qemu is about to read
from the fifo.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-2-git-send-email-kraxel@redhat.com
(cherry picked from commit 5213602678)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:37:08 -05:00
Fam Zheng
63a396d151 block: Drop bdrv_ioctl_bh_cb
Similar to the "!drv || !drv->bdrv_aio_ioctl" case above, here it is
okay to set co.ret and return. As pointed out by Paolo, a BH will be
created as necessary by the caller (bdrv_co_maybe_schedule_bh).
Besides, as pointed out by Kevin, "data" was leaked before.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20160601015223.19277-1-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit c8a9fd8071)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:33:39 -05:00
Prasad J Pandit
f882993a8c scsi: mptsas: infinite loop while fetching requests
The LSI SAS1068 Host Bus Adapter emulator in Qemu, periodically
looks for requests and fetches them. A loop doing that in
mptsas_fetch_requests() could run infinitely if 's->state' was
not operational. Move check to avoid such a loop.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Message-Id: <1464077264-25473-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 06630554cc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:32:04 -05:00
Prasad J Pandit
8b95d8e1d5 scsi: pvscsi: check command descriptor ring buffer size (CVE-2016-4952)
Vmware Paravirtual SCSI emulation uses command descriptors to
process SCSI commands. These descriptors come with their ring
buffers. A guest could set the ring buffer size to an arbitrary
value leading to OOB access issue. Add check to avoid it.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Message-Id: <1464000485-27041-1-git-send-email-ppandit@redhat.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 3e831b40e0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:31:47 -05:00
Steven Luo
54eb4cf5fc Fix configure test for PBKDF2 in nettle
On my Debian jessie system, including nettle/pbkdf2.h does not cause
NULL to be defined, which causes the test to fail to compile.  Include
stddef.h to bring in a definition of NULL.

Cc: qemu-trivial@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 9e87a691bd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:30:59 -05:00
Greg Kurz
e81a24a748 savevm: fail if migration blockers are present
QEMU has currently two ways to prevent migration to occur:
- migration blocker when it depends on runtime state
- VMStateDescription.unmigratable when migration is not supported at all

This patch gathers all the logic into a single function to be called from
both the savevm and the migrate paths.

This fixes a bug with 9p, at least, where savevm would succeed and the
following would happen in the guest after loadvm:

$ ls /host
ls: cannot access /host: Protocol error

With this patch:

(qemu) savevm foo
Migration is disabled when VirtFS export path '/' is mounted in the guest
using mount_tag 'host'

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <146239057139.11271.9011797645454781543.stgit@bahia.huguette.org>

[Update subject according to Paolo's suggestion - Amit]

Signed-off-by: Amit Shah <amit.shah@redhat.com>
(cherry picked from commit 24f3902b08)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:29:25 -05:00
Eric Blake
fb26337641 nbd: Don't trim unrequested bytes
Similar to commit df7b97ff, we are mishandling clients that
give an unaligned NBD_CMD_TRIM request, and potentially
trimming bytes that occur before their request; which in turn
can cause potential unintended data loss (unlikely in
practice, since most clients are sane and issue aligned trim
requests).  However, while we fixed read and write by switching
to the byte interfaces of blk_, we don't yet have a byte
interface for discard.  On the other hand, trim is advisory, so
rounding the user's request to simply ignore the first and last
unaligned sectors (or the entire request, if it is sub-sector
in length) is just fine.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1464173965-9694-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 353ab96973)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:28:06 -05:00
Peter Lieven
509e13298f block/iscsi: avoid potential overflow of acb->task->cdb
at least in the path via virtio-blk the maximum size is not
restricted.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1464080368-29584-1-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a6b3167fa0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:24:41 -05:00
Gavin Shan
6e7ee9862b vfio: Fix broken EEH
vfio_eeh_container_op() is the backend that communicates with
host kernel to support EEH functionality in QEMU. However, the
functon should return the value from host kernel instead of 0
unconditionally.

dwg: Specifically the problem occurs for the handful of EEH
sub-operations which can return a non-zero, non-error result.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[dwg: clarification to commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

(cherry picked from commit d917e88d85)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:23:19 -05:00
Gerd Hoffmann
7ff5dc445d vga: add sr_vbe register set
Commit "fd3c136 vga: make sure vga register setup for vbe stays intact
(CVE-2016-3712)." causes a regression.  The win7 installer is unhappy
because it can't freely modify vga registers any more while in vbe mode.

This patch introduces a new sr_vbe register set.  The vbe_update_vgaregs
will fill sr_vbe[] instead of sr[].  Normal vga register reads and
writes go to sr[].  Any sr register read access happens through a new
sr() helper function which will read from sr_vbe[] with vbe active and
from sr[] otherwise.

This way we can allow guests update sr[] registers as they want, without
allowing them disrupt vbe video modes that way.

Cc: qemu-stable@nongnu.org
Reported-by: Thomas Lamprecht <thomas@lamprecht.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1463475294-14119-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 94ef4f337f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:46:46 -05:00
Thomas Huth
a1f006fe93 usb/ohci: Fix crash with when specifying too many num-ports
QEMU currently crashes when an OHCI controller is instantiated with
too many ports, e.g. "-device pci-ohci,num-ports=100,masterbus=1".
Thus add a proper check in usb_ohci_init() to make sure that we
do not use more than OHCI_MAX_PORTS = 15 ports here.

Ticket: https://bugs.launchpad.net/qemu/+bug/1581308
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1463995387-11710-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit d400fc018b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:43:40 -05:00
Peter Lieven
cba9a8042f block/nfs: refuse readahead if cache.direct is on
if we open a NFS export with disabled cache we should refuse
the readahead feature as it will cache data inside libnfs.

If a export was opened with readahead enabled it should
futher not be allowed to disable the cache while running.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1463662083-20814-2-git-send-email-pl@kamp.de
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit 38f8d5e025)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:42:32 -05:00
Prasad J Pandit
9b28a7fc88 esp: check dma length before reading scsi command(CVE-2016-4441)
The 53C9X Fast SCSI Controller(FSC) comes with an internal 16-byte
FIFO buffer. It is used to handle command and data transfer.
Routine get_cmd() uses DMA to read scsi commands into this buffer.
Add check to validate DMA length against buffer size to avoid any
overrun.

Fixes CVE-2016-4441.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1463654371-11169-3-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 6c1fef6b59)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:42:05 -05:00
Prasad J Pandit
0a5e3685ea esp: check command buffer length before write(CVE-2016-4439)
The 53C9X Fast SCSI Controller(FSC) comes with an internal 16-byte
FIFO buffer. It is used to handle command and data transfer. While
writing to this command buffer 's->cmdbuf[TI_BUFSZ=16]', a check
was missing to validate input length. Add check to avoid OOB write
access.

Fixes CVE-2016-4439.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1463654371-11169-2-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit c98c6c105f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:41:59 -05:00
Paolo Bonzini
2522f0fcd1 json-streamer: fix double-free on exiting during a parse
Now that json-streamer tries not to leak tokens on incomplete parse,
the tokens can be freed twice if QEMU destroys the json-streamer
object during the parser->emit call.  To fix this, create the new
empty GQueue earlier, so that it is already in place when the old
one is passed to parser->emit.

Reported-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1467636059-12557-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a942d8fa01)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:34:29 -05:00
Eric Blake
ebe0376e8c json-streamer: Don't leak tokens on incomplete parse
Valgrind complained about a number of leaks in
tests/check-qobject-json:

==12657==    definitely lost: 17,247 bytes in 1,234 blocks

All of which had the same root cause: on an incomplete parse,
we were abandoning the token queue without cleaning up the
allocated data within each queue element.  Introduced in
commit 95385fe, when we switched from QList (which recursively
frees contents) to g_queue (which does not).

We don't yet require glib 2.32 with its g_queue_free_full(),
so open-code it instead.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1463608012-12760-1-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit ba4dba5434)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:34:10 -05:00
Greg Kurz
9520c6cb1f migration: regain control of images when migration fails to complete
We currently have an error path during migration that can cause
the source QEMU to abort:

migration_thread()
  migration_completion()
    runstate_is_running() ----------------> true if guest is running
    bdrv_inactivate_all() ----------------> inactivate images
    qemu_savevm_state_complete_precopy()
     ... qemu_fflush()
           socket_writev_buffer() --------> error because destination fails
         qemu_fflush() -------------------> set error on migration stream
  migration_completion() -----------------> set migrate state to FAILED
migration_thread() -----------------------> break migration loop
  vm_start() -----------------------------> restart guest with inactive
                                            images

and you get:

qemu-system-ppc64: socket_writev_buffer: Got err=104 for (32768/18446744073709551615)
qemu-system-ppc64: /home/greg/Work/qemu/qemu-master/block/io.c:1342:bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed.
Aborted (core dumped)

If we try postcopy with a similar scenario, we also get the writev error
message but QEMU leaves the guest paused because entered_postcopy is true.

We could possibly do the same with precopy and leave the guest paused.
But since the historical default for migration errors is to restart the
source, this patch adds a call to bdrv_invalidate_cache_all() instead.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Message-Id: <146357896785.6003.11983081732454362715.stgit@bahia.huguette.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
(cherry picked from commit fe904ea824)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:31:03 -05:00
Stefan Weil
dbbadeb48c configure: Allow builds with extra warnings
The clang compiler supports a useful compiler option -Weverything,
and GCC also has other warnings not enabled by -Wall.

If glib header files trigger a warning, however, testing glib with
-Werror will always fail. A size mismatch is also detected without
-Werror, so simply remove it.

Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <1461879221-13338-1-git-send-email-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5919e0328b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:30:30 -05:00
Paolo Bonzini
bd5d278668 target-i386: key sfence availability on CPUID_SSE, not CPUID_SSE2
sfence was introduced before lfence and mfence.  This fixes Linux
2.4's measurement of checksumming speeds for the pIII_sse
algorithm:

md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :   384.400 MB/sec
   32regs    :   259.200 MB/sec
invalid operand: 0000
CPU:    0
EIP:    0010:[<c0240b2a>]    Not tainted
EFLAGS: 00000246
eax: c15d8000   ebx: 00000000   ecx: 00000000   edx: c15d5000
esi: 8005003b   edi: 00000004   ebp: 00000000   esp: c15bdf50
ds: 0018   es: 0018   ss: 0018
Process swapper (pid: 1, stackpage=c15bd000)
Stack: 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
       00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
       00000000 00000206 c0241c6c 00001000 c15d4000 c15d7000 c15d4000
c15d4000
Call Trace:    [<c0241c6c>] [<c0105000>] [<c0241db4>] [<c010503b>]
[<c0105000>]
  [<c0107416>] [<c0105030>]

Code: 0f ae f8 0f 10 04 24 0f 10 4c 24 10 0f 10 54 24 20 0f 10 5c
 <0>Kernel panic: Attempted to kill init!

Reported-by: Stefan Weil <sw@weilnetz.de>
Fixes: 121f315788
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 14cb949a3e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:29:06 -05:00
Aurelien Jarno
a525decfaa target-mips: fix call to memset in soft reset code
Recent versions of GCC report the following error when compiling
target-mips/helper.c:

  qemu/target-mips/helper.c:542:9: warning: ‘memset’ used with length
  equal to number of elements without multiplication by element size
  [-Wmemset-elt-size]

This is indeed correct and due to a wrong usage of sizeof(). Fix that.

Cc: Stefan Weil <sw@weilnetz.de>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: qemu-stable@nongnu.org
LP: https://bugs.launchpad.net/qemu/+bug/1577841
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
(cherry picked from commit 9d989c732b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:27:40 -05:00
Roman Kagan
2cf1a1223b usb:xhci: no DMA on HC reset
This patch is a rough fix to a memory corruption we are observing when
running VMs with xhci USB controller and OVMF firmware.

Specifically, on the following call chain

xhci_reset
  xhci_disable_slot
    xhci_disable_ep
      xhci_set_ep_state

QEMU overwrites guest memory using stale guest addresses.

This doesn't happen when the guest (firmware) driver sets up xhci for
the first time as there are no slots configured yet.  However when the
firmware hands over the control to the OS some slots and endpoints are
already set up with their context in the guest RAM.  Now the OS' driver
resets the controller again and xhci_set_ep_state then reads and writes
that memory which is now owned by the OS.

As a quick fix, skip calling xhci_set_ep_state in xhci_disable_ep if the
device context base address array pointer is zero (indicating we're in
the HC reset and no DMA is possible).

Cc: qemu-stable@nongnu.org
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-id: 1462384435-1034-1-git-send-email-rkagan@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 491d68d938)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:26:45 -05:00
Dominik Dingel
ea819be42b exec.c: Ensure right alignment also for file backed ram
While in the anonymous ram case we already take care of the right alignment
such an alignment gurantee does not exist for file backed ram allocation.

Instead, pagesize is used for alignment. On s390 this is not enough for gmap,
as we need to satisfy an alignment up to segments.

Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>

Message-Id: <1461585338-45863-1-git-send-email-dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d2f39add72)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:24:41 -05:00
Hemant Kumar
5a908cb1a8 tools: kvm_stat: Powerpc related fixes
kvm_stat script is failing to execute on powerpc :
 # ./kvm_stat
Traceback (most recent call last):
  File "./kvm_stat", line 825, in <module>
    main()
  File "./kvm_stat", line 813, in main
    providers = get_providers(options)
  File "./kvm_stat", line 778, in get_providers
    providers.append(TracepointProvider())
  File "./kvm_stat", line 416, in __init__
    self.filters = get_filters()
  File "./kvm_stat", line 315, in get_filters
    if ARCH.exit_reasons:
AttributeError: 'ArchPPC' object has no attribute 'exit_reasons'

This is because, its trying to access a non-defined attribute.

Also, the IOCTL number of RESET is incorrect for powerpc. The correct
number has been added.

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* cherry-picked from linux commit c7d4fb5a
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:23:35 -05:00
Li Zhijian
07a3a482c3 vl: change runstate only if new state is different from current state
Previously, qemu will abort at following scenario:
(qemu) stop
(qemu) system_reset
(qemu) system_reset
(qemu) 2016-04-13T20:54:38.979158Z qemu-system-x86_64: invalid runstate transition: 'prelaunch' -> 'prelaunch'

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1460604352-18630-1-git-send-email-lizhijian@cn.fujitsu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e92a2d9cb3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:01:36 -05:00
Gerd Hoffmann
5b6c12e245 spice/gl: add & use qemu_spice_gl_monitor_config
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit 39414ef4e9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:00:18 -05:00
Prasad J Pandit
d00ba3fa9b i386: kvmvapic: initialise imm32 variable
When processing Task Priorty Register(TPR) access, it could leak
automatic stack variable 'imm32' in patch_instruction().
Initialise the variable to avoid it.

Reported by: Donghai Zdh <donghai.zdh@alibaba-inc.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1460013608-16670-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

(cherry picked from commit 691a02e2ce)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 15:52:54 -05:00
6931 changed files with 497168 additions and 1278066 deletions

View File

@@ -1,27 +0,0 @@
env:
CIRRUS_CLONE_DEPTH: 1
freebsd_12_task:
freebsd_instance:
image: freebsd-12-0-release-amd64
cpu: 8
memory: 8G
install_script: pkg install -y
bash bison curl cyrus-sasl git glib gmake gnutls gsed
nettle perl5 pixman pkgconf png usbredir
script:
- mkdir build
- cd build
- ../configure || { cat config.log; exit 1; }
- gmake -j8
- gmake -j8 V=1 check
macos_task:
osx_instance:
image: mojave-base
install_script:
- brew install pkg-config python gnu-sed glib pixman make sdl2
script:
- ./configure --python=/usr/local/bin/python3 || { cat config.log; exit 1; }
- gmake -j$(sysctl -n hw.ncpu)
- gmake check -j$(sysctl -n hw.ncpu)

View File

@@ -1,43 +0,0 @@
# EditorConfig is a file format and collection of text editor plugins
# for maintaining consistent coding styles between different editors
# and IDEs. Most popular editors support this either natively or via
# plugin.
#
# Check https://editorconfig.org for details.
root = true
[*]
end_of_line = lf
insert_final_newline = true
charset = utf-8
[*.mak]
indent_style = tab
indent_size = 8
file_type_emacs = makefile
[Makefile*]
indent_style = tab
indent_size = 8
file_type_emacs = makefile
[*.{c,h}]
indent_style = space
indent_size = 4
[*.sh]
indent_style = space
indent_size = 4
[*.{s,S}]
indent_style = tab
indent_size = 8
file_type_emacs = asm
[*.{vert,frag}]
file_type_emacs = glsl
[*.json]
indent_style = space
file_type_emacs = python

View File

@@ -1,8 +0,0 @@
# GDB may have ./.gdbinit loading disabled by default. In that case you can
# follow the instructions it prints. They boil down to adding the following to
# your home directory's ~/.gdbinit file:
#
# add-auto-load-safe-path /path/to/qemu/.gdbinit
# Load QEMU-specific sub-commands and settings
source scripts/qemu-gdb.py

93
.gitignore vendored
View File

@@ -1,4 +1,3 @@
/.doctrees
/config-devices.*
/config-all-devices.*
/config-all-disas.*
@@ -6,18 +5,20 @@
/config-target.*
/config.status
/config-temp
/elf2dmp
/trace-events-all
/trace/generated-tracers.h
/trace/generated-tracers.c
/trace/generated-tracers-dtrace.h
/trace/generated-tracers.dtrace
/trace/generated-events.h
/trace/generated-events.c
/trace/generated-helpers-wrappers.h
/trace/generated-helpers.h
/trace/generated-helpers.c
/trace/generated-tcg-tracers.h
/trace/generated-ust-provider.h
/trace/generated-ust.c
/ui/shader/texture-blit-frag.h
/ui/shader/texture-blit-vert.h
/ui/shader/texture-blit-flip-vert.h
/ui/input-keymap-*.c
*-timestamp
/*-softmmu
/*-darwin-user
@@ -29,24 +30,17 @@
/libuser
/linux-headers/asm
/qga/qapi-generated
/qapi-gen-timestamp
/qapi/qapi-builtin-types.[ch]
/qapi/qapi-builtin-visit.[ch]
/qapi/qapi-commands-*.[ch]
/qapi/qapi-commands.[ch]
/qapi/qapi-emit-events.[ch]
/qapi/qapi-events-*.[ch]
/qapi/qapi-events.[ch]
/qapi/qapi-introspect.[ch]
/qapi/qapi-types-*.[ch]
/qapi/qapi-types.[ch]
/qapi/qapi-visit-*.[ch]
/qapi/qapi-visit.[ch]
/qapi/qapi-doc.texi
/qapi-generated
/qapi-types.[ch]
/qapi-visit.[ch]
/qapi-event.[ch]
/qmp-commands.h
/qmp-introspect.[ch]
/qmp-marshal.c
/qemu-doc.html
/qemu-tech.html
/qemu-doc.info
/qemu-doc.txt
/qemu-edid
/qemu-tech.info
/qemu-img
/qemu-nbd
/qemu-options.def
@@ -56,21 +50,16 @@
/qemu-io
/qemu-ga
/qemu-bridge-helper
/qemu-keymap
/qemu-monitor.texi
/qemu-monitor-info.texi
/qemu-version.h
/qemu-version.h.tmp
/module_block.h
/scsi/qemu-pr-helper
/vhost-user-scsi
/vhost-user-blk
/qmp-commands.txt
/vscclient
/fsdev/virtfs-proxy-helper
*.tmp
*.[1-9]
*.a
*.aux
*.cp
*.dvi
*.exe
*.msi
*.dll
@@ -92,25 +81,19 @@
*.d
!/scripts/qemu-guest-agent/fsfreeze-hook.d
*.o
*.lo
*.la
*.pc
.libs
.sdk
*.gcda
*.gcno
*.gcov
/pc-bios/bios-pq/status
/pc-bios/edk2-*.fd
/pc-bios/vgabios-pq/status
/pc-bios/optionrom/linuxboot.asm
/pc-bios/optionrom/linuxboot.bin
/pc-bios/optionrom/linuxboot.raw
/pc-bios/optionrom/linuxboot.img
/pc-bios/optionrom/linuxboot_dma.asm
/pc-bios/optionrom/linuxboot_dma.bin
/pc-bios/optionrom/linuxboot_dma.raw
/pc-bios/optionrom/linuxboot_dma.img
/pc-bios/optionrom/pvh.asm
/pc-bios/optionrom/pvh.bin
/pc-bios/optionrom/pvh.raw
/pc-bios/optionrom/pvh.img
/pc-bios/optionrom/multiboot.asm
/pc-bios/optionrom/multiboot.bin
/pc-bios/optionrom/multiboot.raw
@@ -121,40 +104,8 @@
/pc-bios/optionrom/kvmvapic.img
/pc-bios/s390-ccw/s390-ccw.elf
/pc-bios/s390-ccw/s390-ccw.img
/docs/built
/docs/interop/qemu-ga-qapi.texi
/docs/interop/qemu-ga-ref.html
/docs/interop/qemu-ga-ref.info*
/docs/interop/qemu-ga-ref.txt
/docs/interop/qemu-qmp-qapi.texi
/docs/interop/qemu-qmp-ref.html
/docs/interop/qemu-qmp-ref.info*
/docs/interop/qemu-qmp-ref.txt
/docs/version.texi
*.tps
.stgit-*
.git-submodule-status
cscope.*
tags
TAGS
docker-src.*
*~
*.ast_raw
*.depend_raw
trace.h
trace.c
trace-ust.h
trace-ust.h
trace-dtrace.h
trace-dtrace.dtrace
trace-root.h
trace-root.c
trace-ust-root.h
trace-ust-root.h
trace-ust-all.h
trace-ust-all.c
trace-dtrace-root.h
trace-dtrace-root.dtrace
trace-ust-all.h
trace-ust-all.c
/target/arm/decode-sve.inc.c

View File

@@ -1,88 +0,0 @@
before_script:
- apt-get update -qq
- apt-get install -y -qq flex bison libglib2.0-dev libpixman-1-dev genisoimage
build-system1:
script:
- apt-get install -y -qq libgtk-3-dev libvte-dev nettle-dev libcacard-dev
libusb-dev libvde-dev libspice-protocol-dev libgl1-mesa-dev
- ./configure --enable-werror --target-list="aarch64-softmmu alpha-softmmu
cris-softmmu hppa-softmmu lm32-softmmu moxie-softmmu microblazeel-softmmu
mips64el-softmmu m68k-softmmu ppc-softmmu riscv64-softmmu sparc-softmmu"
- make -j2
- make -j2 check
build-system2:
script:
- apt-get install -y -qq libsdl2-dev libgcrypt-dev libbrlapi-dev libaio-dev
libfdt-dev liblzo2-dev librdmacm-dev libibverbs-dev libibumad-dev
- ./configure --enable-werror --target-list="tricore-softmmu unicore32-softmmu
microblaze-softmmu mips-softmmu riscv32-softmmu s390x-softmmu sh4-softmmu
sparc64-softmmu x86_64-softmmu xtensa-softmmu nios2-softmmu or1k-softmmu"
- make -j2
- make -j2 check
build-disabled:
script:
- ./configure --enable-werror --disable-rdma --disable-slirp --disable-curl
--disable-capstone --disable-live-block-migration --disable-glusterfs
--disable-replication --disable-coroutine-pool --disable-smartcard
--disable-guest-agent --disable-curses --disable-libxml2 --disable-tpm
--disable-qom-cast-debug --disable-spice --disable-vhost-vsock
--disable-vhost-net --disable-vhost-crypto --disable-vhost-user
--target-list="i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user"
- make -j2
- make -j2 check-qtest SPEED=slow
build-tcg-disabled:
script:
- apt-get install -y -qq clang libgtk-3-dev libbluetooth-dev libusb-dev
- ./configure --cc=clang --enable-werror --disable-tcg --audio-drv-list=""
- make -j2
- make check-unit
- make check-qapi-schema
- cd tests/qemu-iotests/
- ./check -raw 001 002 003 004 005 008 009 010 011 012 021 025 032 033 048
052 063 077 086 101 104 106 113 147 148 150 151 152 157 159 160
163 170 171 183 184 192 194 197 205 208 215 221 222 226 227 236
- ./check -qcow2 001 002 003 004 005 007 008 009 010 011 012 013 017 018 019
020 021 022 024 025 027 028 029 031 032 033 034 035 036 037 038
039 040 042 043 046 047 048 049 050 051 052 053 054 056 057 058
060 061 062 063 065 066 067 068 069 071 072 073 074 079 080 082
085 086 089 090 091 095 096 097 098 099 102 103 104 105 107 108
110 111 114 117 120 122 124 126 127 129 130 132 133 134 137 138
139 140 141 142 143 144 145 147 150 151 152 154 155 156 157 158
161 165 170 172 174 176 177 179 184 186 187 190 192 194 195 196
197 200 202 203 205 208 209 214 215 216 217 218 222 226 227 229 234
build-user:
script:
- ./configure --enable-werror --disable-system --disable-guest-agent
--disable-capstone --disable-slirp --disable-fdt
- make -j2
- make run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
build-clang:
script:
- apt-get install -y -qq clang libsdl2-dev
xfslibs-dev libiscsi-dev libnfs-dev libseccomp-dev gnutls-dev librbd-dev
- ./configure --cc=clang --cxx=clang++ --enable-werror
--target-list="alpha-softmmu arm-softmmu m68k-softmmu mips64-softmmu
ppc-softmmu s390x-softmmu x86_64-softmmu arm-linux-user"
- make -j2
- make -j2 check
build-tci:
script:
- TARGETS="aarch64 alpha arm hppa m68k microblaze moxie ppc64 s390x x86_64"
- ./configure --enable-tcg-interpreter
--target-list="$(for tg in $TARGETS; do echo -n ${tg}'-softmmu '; done)"
- make -j2
- make tests/boot-serial-test tests/cdrom-test tests/pxe-test
- for tg in $TARGETS ; do
export QTEST_QEMU_BINARY="${tg}-softmmu/qemu-system-${tg}" ;
./tests/boot-serial-test || exit 1 ;
./tests/cdrom-test || exit 1 ;
done
- QTEST_QEMU_BINARY="x86_64-softmmu/qemu-system-x86_64" ./tests/pxe-test
- QTEST_QEMU_BINARY="s390x-softmmu/qemu-system-s390x" ./tests/pxe-test -m slow

54
.gitmodules vendored
View File

@@ -1,57 +1,33 @@
[submodule "roms/vgabios"]
path = roms/vgabios
url = git://git.qemu-project.org/vgabios.git/
[submodule "roms/seabios"]
path = roms/seabios
url = https://git.qemu.org/git/seabios.git/
url = git://git.qemu-project.org/seabios.git/
[submodule "roms/SLOF"]
path = roms/SLOF
url = https://git.qemu.org/git/SLOF.git
url = git://git.qemu-project.org/SLOF.git
[submodule "roms/ipxe"]
path = roms/ipxe
url = https://git.qemu.org/git/ipxe.git
url = git://git.qemu-project.org/ipxe.git
[submodule "roms/openbios"]
path = roms/openbios
url = https://git.qemu.org/git/openbios.git
url = git://git.qemu-project.org/openbios.git
[submodule "roms/openhackware"]
path = roms/openhackware
url = https://git.qemu.org/git/openhackware.git
url = git://git.qemu-project.org/openhackware.git
[submodule "roms/qemu-palcode"]
path = roms/qemu-palcode
url = https://git.qemu.org/git/qemu-palcode.git
url = git://github.com/rth7680/qemu-palcode.git
[submodule "roms/sgabios"]
path = roms/sgabios
url = https://git.qemu.org/git/sgabios.git
url = git://git.qemu-project.org/sgabios.git
[submodule "pixman"]
path = pixman
url = git://anongit.freedesktop.org/pixman
[submodule "dtc"]
path = dtc
url = https://git.qemu.org/git/dtc.git
url = git://git.qemu-project.org/dtc.git
[submodule "roms/u-boot"]
path = roms/u-boot
url = https://git.qemu.org/git/u-boot.git
[submodule "roms/skiboot"]
path = roms/skiboot
url = https://git.qemu.org/git/skiboot.git
[submodule "roms/QemuMacDrivers"]
path = roms/QemuMacDrivers
url = https://git.qemu.org/git/QemuMacDrivers.git
[submodule "ui/keycodemapdb"]
path = ui/keycodemapdb
url = https://git.qemu.org/git/keycodemapdb.git
[submodule "capstone"]
path = capstone
url = https://git.qemu.org/git/capstone.git
[submodule "roms/seabios-hppa"]
path = roms/seabios-hppa
url = https://git.qemu.org/git/seabios-hppa.git
[submodule "roms/u-boot-sam460ex"]
path = roms/u-boot-sam460ex
url = https://git.qemu.org/git/u-boot-sam460ex.git
[submodule "tests/fp/berkeley-testfloat-3"]
path = tests/fp/berkeley-testfloat-3
url = https://git.qemu.org/git/berkeley-testfloat-3.git
[submodule "tests/fp/berkeley-softfloat-3"]
path = tests/fp/berkeley-softfloat-3
url = https://git.qemu.org/git/berkeley-softfloat-3.git
[submodule "roms/edk2"]
path = roms/edk2
url = https://git.qemu.org/git/edk2.git
[submodule "slirp"]
path = slirp
url = https://git.qemu.org/git/libslirp.git
url = git://git.qemu-project.org/u-boot.git

View File

@@ -1,51 +0,0 @@
#
# Common git-publish profiles that can be used to send patches to QEMU upstream.
#
# See https://github.com/stefanha/git-publish for more information
#
[gitpublishprofile "default"]
base = master
to = qemu-devel@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "rfc"]
base = master
prefix = RFC PATCH
to = qemu-devel@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "stable"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-stable@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "trivial"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-trivial@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "block"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-block@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "arm"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-arm@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "s390"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-s390@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "ppc"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-ppc@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null

View File

@@ -1,7 +1,6 @@
# This mailmap fixes up author names/addresses.
# The first section translates weird addresses from the original git import
# into proper addresses so that they are counted properly by git shortlog.
# This mailmap just translates the weird addresses from the original import into git
# into proper addresses so that they are counted properly in git shortlog output.
#
Andrzej Zaborowski <balrogg@gmail.com> balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
Anthony Liguori <anthony@codemonkey.ws> aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162>
Anthony Liguori <anthony@codemonkey.ws> Anthony Liguori <aliguori@us.ibm.com>
@@ -9,31 +8,10 @@ Aurelien Jarno <aurelien@aurel32.net> aurel32 <aurel32@c046a42c-6fe2-441c-8c8c-7
Blue Swirl <blauwirbel@gmail.com> blueswir1 <blueswir1@c046a42c-6fe2-441c-8c8c-71466251a162>
Edgar E. Iglesias <edgar.iglesias@gmail.com> edgar_igl <edgar_igl@c046a42c-6fe2-441c-8c8c-71466251a162>
Fabrice Bellard <fabrice@bellard.org> bellard <bellard@c046a42c-6fe2-441c-8c8c-71466251a162>
James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
Jocelyn Mayer <l_indien@magic.fr> j_mayer <j_mayer@c046a42c-6fe2-441c-8c8c-71466251a162>
Paul Brook <paul@codesourcery.com> pbrook <pbrook@c046a42c-6fe2-441c-8c8c-71466251a162>
Yongbok Kim <yongbok.kim@mips.com> <yongbok.kim@imgtec.com>
Aleksandar Markovic <amarkovic@wavecomp.com> <aleksandar.markovic@mips.com>
Aleksandar Markovic <amarkovic@wavecomp.com> <aleksandar.markovic@imgtec.com>
Paul Burton <pburton@wavecomp.com> <paul.burton@mips.com>
Paul Burton <pburton@wavecomp.com> <paul.burton@imgtec.com>
Paul Burton <pburton@wavecomp.com> <paul@archlinuxmips.org>
Thiemo Seufer <ths@networkno.de> ths <ths@c046a42c-6fe2-441c-8c8c-71466251a162>
malc <av1474@comtv.ru> malc <malc@c046a42c-6fe2-441c-8c8c-71466251a162>
# There is also a:
# (no author) <(no author)@c046a42c-6fe2-441c-8c8c-71466251a162>
# for the cvs2svn initialization commit e63c3dc74bf.
# Next, translate a few commits where mailman rewrote the From: line due
# to strict SPF, although we prefer to avoid adding more entries like that.
Ed Swierk <eswierk@skyportsystems.com> Ed Swierk via Qemu-devel <qemu-devel@nongnu.org>
Ian McKellar <ianloic@google.com> Ian McKellar via Qemu-devel <qemu-devel@nongnu.org>
Julia Suvorova <jusual@mail.ru> Julia Suvorova via Qemu-devel <qemu-devel@nongnu.org>
Justin Terry (VM) <juterry@microsoft.com> Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
# Also list preferred name forms where people have changed their
# git author config, or had utf8/latin1 encoding issues.
Daniel P. Berrangé <berrange@redhat.com>
Reimar Döffinger <Reimar.Doeffinger@gmx.de>

View File

@@ -1,302 +0,0 @@
---
# Note: this file is still unused. It serves as a documentation for the
# Patchew configuration in case patchew.org disappears or has to be
# reinstalled.
#
# Patchew configuration is available to project administrators at
# https://patchew.org/api/v1/projects/1/config/ and can be configured
# to YAML using the following Python script:
#
# import json
# import sys
# import ruamel.yaml
#
# json_str = sys.stdin.read()
# yaml = ruamel.yaml.YAML()
# yaml.explicit_start = True
# data = json.loads(json_str, object_pairs_hook=ruamel.yaml.comments.CommentedMap)
# ruamel.yaml.scalarstring.walk_tree(data)
# yaml.dump(data, sys.stdout)
email:
notifications:
timeouts:
event: TestingReport
enabled: true
to_user: false
reply_subject: true
set_reply_to: true
in_reply_to: true
reply_to_all: false
subject_template: none
to: fam@euphon.net
cc: ''
body_template: |
{% if not is_timeout %} {{ cancel }} {% endif %}
Test '{{ test }}' timeout, log:
{{ log }}
ENOSPC:
event: TestingReport
enabled: true
to_user: false
reply_subject: false
set_reply_to: false
in_reply_to: true
reply_to_all: false
subject_template: Out of space error
to: fam@euphon.net
cc: ''
body_template: |
{% if passed %}
{{ cancel }}
{% endif %}
{% if 'No space left on device' in log %}
Tester {{ tester }} out of space when running {{ test }}
{{ log }}
{% else %}
{{ cancel }}
{% endif %}
FailureShort:
event: TestingReport
enabled: true
to_user: false
reply_subject: true
set_reply_to: true
in_reply_to: true
reply_to_all: true
subject_template: Testing failed
to: ''
cc: ''
body_template: |
{% if passed or not obj.message_id or is_timeout %}
{{ cancel }}
{% endif %}
{% if 'No space left on device' in log %}
{{ cancel }}
{% endif %}
Patchew URL: https://patchew.org/QEMU/{{ obj.message_id }}/
{% ansi2text log as logtext %}
{% if test == "checkpatch" %}
Hi,
This series seems to have some coding style problems. See output below for
more information:
{{ logtext }}
{% elif test == "docker-mingw@fedora" or test == "docker-quick@centos7" or test == "asan" %}
Hi,
This series failed the {{ test }} build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
{% lines_between logtext start="^=== TEST SCRIPT BEGIN ===$" stop="^=== TEST SCRIPT END ===$" %}
{% lines_between logtext start="^=== OUTPUT BEGIN ===$" stop="=== OUTPUT END ===$" as output %}
{% grep_C output regex="\b(FAIL|XPASS|ERROR|WARN|error:|warning:)" n=3 %}
{% elif test == "s390x" or test == "FreeBSD" or test == "ppcle" or test == "ppcbe" %}
Hi,
This series failed build test on {{test}} host. Please find the details below.
{% lines_between logtext start="^=== TEST SCRIPT BEGIN ===$" stop="^=== TEST SCRIPT END ===$" %}
{% lines_between logtext start="^=== OUTPUT BEGIN ===$" stop="=== OUTPUT END ===$" as output %}
{% grep_C output regex="\b(FAIL|XPASS|ERROR|WARN|error:|warning:)" n=3 %}
{% else %}
{{ cancel }}
{% endif %}
The full log is available at
{{ log_url }}.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
testing:
tests:
asan:
enabled: true
requirements: docker
timeout: 3600
script: |
#!/bin/bash
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1
docker-quick@centos7:
enabled: false
requirements: docker,x86_64
timeout: 3600
script: |
#!/bin/bash
time make docker-test-quick@centos7 SHOW_ENV=1 J=14 NETWORK=1
checkpatch:
enabled: true
requirements: ''
timeout: 600
script: |
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
docker-mingw@fedora:
enabled: true
requirements: docker,x86_64
timeout: 3600
script: |
#! /bin/bash
test "$(uname -m)" = "x86_64"
ppcle:
enabled: false
requirements: ppcle
timeout: 3600
script: |
#!/bin/bash
# Testing script will be invoked under the git checkout with
# HEAD pointing to a commit that has the patches applied on top of "base"
# branch
set -e
CC=$HOME/bin/cc
INSTALL=$PWD/install
BUILD=$PWD/build
mkdir -p $BUILD $INSTALL
SRC=$PWD
cd $BUILD
$SRC/configure --cc=$CC --prefix=$INSTALL
make -j4
# XXX: we need reliable clean up
# make check -j4 V=1
make install
echo
echo "=== ENV ==="
env
echo
echo "=== PACKAGES ==="
rpm -qa
ppcbe:
enabled: false
requirements: ppcbe
timeout: 3600
script: |
#!/bin/bash
# Testing script will be invoked under the git checkout with
# HEAD pointing to a commit that has the patches applied on top of "base"
# branch
set -e
CC=$HOME/bin/cc
INSTALL=$PWD/install
BUILD=$PWD/build
mkdir -p $BUILD $INSTALL
SRC=$PWD
cd $BUILD
$SRC/configure --cc=$CC --prefix=$INSTALL
make -j4
# XXX: we need reliable clean up
# make check -j4 V=1
make install
echo
echo "=== ENV ==="
env
echo
echo "=== PACKAGES ==="
rpm -qa
FreeBSD:
enabled: true
requirements: qemu-x86,x86_64,git
timeout: 3600
script: |
#!/bin/bash
# Testing script will be invoked under the git checkout with
# HEAD pointing to a commit that has the patches applied on top of "base"
# branch
if qemu-system-x86_64 --help >/dev/null 2>&1; then
QEMU=qemu-system-x86_64
elif /usr/libexec/qemu-kvm --help >/dev/null 2>&1; then
QEMU=/usr/libexec/qemu-kvm
else
exit 1
fi
make vm-build-freebsd J=21 QEMU=$QEMU
exit 0
docker-clang@ubuntu:
enabled: true
requirements: docker,x86_64
timeout: 3600
script: |
#!/bin/bash
time make docker-test-clang@ubuntu SHOW_ENV=1 J=14 NETWORK=1
s390x:
enabled: true
requirements: s390x
timeout: 3600
script: |
#!/bin/bash
# Testing script will be invoked under the git checkout with
# HEAD pointing to a commit that has the patches applied on top of "base"
# branch
set -e
CC=$HOME/bin/cc
INSTALL=$PWD/install
BUILD=$PWD/build
mkdir -p $BUILD $INSTALL
SRC=$PWD
cd $BUILD
$SRC/configure --cc=$CC --prefix=$INSTALL
make -j4
# XXX: we need reliable clean up
# make check -j4 V=1
make install
echo
echo "=== ENV ==="
env
echo
echo "=== PACKAGES ==="
rpm -qa
requirements:
x86_64:
script: |
#! /bin/bash
test "$(uname -m)" = "x86_64"
qemu-x86:
script: |
#!/bin/bash
if qemu-system-x86_64 --help >/dev/null 2>&1; then
:
elif /usr/libexec/qemu-kvm --help >/dev/null 2>&1; then
:
else
exit 1
fi
ppcle:
script: |
#!/bin/bash
test "$(uname -m)" = "ppc64le"
ppcbe:
script: |
#!/bin/bash
test "$(uname -m)" = "ppc64"
git:
script: |
#! /bin/bash
git config user.name > /dev/null 2>&1
docker:
script: |
#!/bin/bash
docker ps || sudo -n docker ps
s390x:
script: |
#!/bin/bash
test "$(uname -m)" = "s390x"
git:
push_to: git@github.com:patchew-project/qemu
public_repo: https://github.com/patchew-project/qemu
url_template: https://github.com/patchew-project/qemu/tree/%t

View File

@@ -1,40 +0,0 @@
language: c
git:
submodules: false
env:
global:
- LC_ALL=C
matrix:
- IMAGE=debian-amd64
TARGET_LIST=x86_64-softmmu,x86_64-linux-user
# currently disabled as the mxe.cc repos are down
# - IMAGE=debian-win32-cross
# TARGET_LIST=arm-softmmu,i386-softmmu,lm32-softmmu
# - IMAGE=debian-win64-cross
# TARGET_LIST=aarch64-softmmu,sparc64-softmmu,x86_64-softmmu
- IMAGE=debian-armel-cross
TARGET_LIST=arm-softmmu,arm-linux-user,armeb-linux-user
- IMAGE=debian-armhf-cross
TARGET_LIST=arm-softmmu,arm-linux-user,armeb-linux-user
- IMAGE=debian-arm64-cross
TARGET_LIST=aarch64-softmmu,aarch64-linux-user
- IMAGE=debian-s390x-cross
TARGET_LIST=s390x-softmmu,s390x-linux-user
- IMAGE=debian-mips-cross
TARGET_LIST=mips-softmmu,mipsel-linux-user
- IMAGE=debian-mips64el-cross
TARGET_LIST=mips64el-softmmu,mips64el-linux-user
- IMAGE=debian-ppc64el-cross
TARGET_LIST=ppc64-softmmu,ppc64-linux-user,ppc64abi32-linux-user
build:
pre_ci:
- make docker-image-${IMAGE} V=1
pre_ci_boot:
image_name: qemu
image_tag: ${IMAGE}
pull: false
options: "-e HOME=/root"
ci:
- unset CC
- ./configure ${QEMU_CONFIGURE_OPTS} --target-list=${TARGET_LIST}
- make -j$(($(getconf _NPROCESSORS_ONLN) + 1))

View File

@@ -1,28 +1,23 @@
# The current Travis default is a VM based 16.04 Xenial on GCE
# Additional builds with specific requirements for a full VM need to
# be added as additional matrix: entries later on
dist: xenial
sudo: false
language: c
python:
- "2.4"
compiler:
- gcc
- clang
cache: ccache
addons:
apt:
packages:
# Build dependencies
- libaio-dev
- libattr1-dev
- libbrlapi-dev
- libcap-ng-dev
- libgcc-4.8-dev
- libgnutls-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
- libncurses5-dev
- libnfs-dev
- libnss3-dev
- libpixman-1-dev
- libpng12-dev
@@ -31,267 +26,65 @@ addons:
- libseccomp-dev
- libspice-protocol-dev
- libspice-server-dev
- libssh-dev
- libssh2-1-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvte-2.91-dev
- libvte-2.90-dev
- sparse
- uuid-dev
- gcovr
homebrew:
packages:
- glib
- pixman
- gnu-sed
# The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu
# to prevent IRC notifications from forks. This was created using:
# $ travis encrypt -r "qemu/qemu" "irc.oftc.net#qemu"
notifications:
irc:
channels:
- secure: "F7GDRgjuOo5IUyRLqSkmDL7kvdU4UcH3Lm/W2db2JnDHTGCqgEdaYEYKciyCLZ57vOTsTsOgesN8iUT7hNHBd1KWKjZe9KDTZWppWRYVwAwQMzVeSOsbbU4tRoJ6Pp+3qhH1Z0eGYR9ZgKYAoTumDFgSAYRp4IscKS8jkoedOqM="
- "irc.oftc.net#qemu"
on_success: change
on_failure: always
env:
global:
- SRC_DIR="."
- BUILD_DIR="."
- BASE_CONFIG="--disable-docs --disable-tools"
- TEST_CMD="make check -j3 V=1"
# This is broadly a list of "mainline" softmmu targets which have support across the major distros
- MAIN_SOFTMMU_TARGETS="aarch64-softmmu,arm-softmmu,i386-softmmu,mips-softmmu,mips64-softmmu,ppc64-softmmu,riscv64-softmmu,s390x-softmmu,x86_64-softmmu"
- TEST_CMD="make check"
matrix:
- CONFIG=""
- CONFIG="--enable-debug --enable-debug-tcg --enable-trace-backends=log"
- CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-uuid --disable-libusb"
- CONFIG="--enable-modules"
- CONFIG="--with-coroutine=ucontext"
- CONFIG="--with-coroutine=sigaltstack"
git:
# we want to do this ourselves
submodules: false
before_install:
- if [ "$TRAVIS_OS_NAME" == "osx" ]; then brew update ; fi
- if [ "$TRAVIS_OS_NAME" == "osx" ]; then brew install libffi gettext glib pixman ; fi
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
before_script:
- mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
- ${SRC_DIR}/configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
- ./configure ${CONFIG}
script:
- make -j3 && ${TEST_CMD}
matrix:
include:
- env:
- CONFIG="--disable-system"
# we split the system builds as it takes a while to build them all
- env:
- CONFIG="--disable-user --target-list=${MAIN_SOFTMMU_TARGETS}"
- env:
- CONFIG="--disable-user --target-list-exclude=${MAIN_SOFTMMU_TARGETS}"
# Just build tools and run minimal unit and softfloat checks
- env:
- BASE_CONFIG="--enable-tools"
- CONFIG="--disable-user --disable-system"
- TEST_CMD="make check-unit check-softfloat -j3"
- env:
- CONFIG="--enable-debug --enable-debug-tcg --disable-user"
# TCG debug can be run just on it's own and is mostly agnostic to user/softmmu distinctions
- env:
- CONFIG="--enable-debug-tcg --disable-system"
- env:
- CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-libusb --disable-replication --target-list=${MAIN_SOFTMMU_TARGETS}"
# Module builds are mostly of interest to major distros
- env:
- CONFIG="--enable-modules --target-list=${MAIN_SOFTMMU_TARGETS}"
# Alternate coroutines implementations are only really of interest to KVM users
# However we can't test against KVM on Travis so we can only run unit tests
- env:
- CONFIG="--with-coroutine=ucontext --disable-tcg"
- TEST_CMD="make check-unit -j3 V=1"
- env:
- CONFIG="--with-coroutine=sigaltstack --disable-tcg"
- TEST_CMD="make check-unit -j3 V=1"
# Check we can build docs and tools (out of tree)
- env:
- BUILD_DIR="out-of-tree/build/dir" SRC_DIR="../../.."
- BASE_CONFIG="--enable-tools --enable-docs"
- CONFIG="--target-list=x86_64-softmmu,aarch64-linux-user"
addons:
apt:
packages:
- python-sphinx
- texinfo
- perl
# Test with Clang for compile portability (Travis uses clang-5.0)
- env:
- CONFIG="--disable-system"
compiler: clang
- env:
- CONFIG="--disable-user --target-list=${MAIN_SOFTMMU_TARGETS}"
compiler: clang
- env:
- CONFIG="--target-list=${MAIN_SOFTMMU_TARGETS} "
compiler: clang
before_script:
- ./configure ${CONFIG} --extra-cflags="-fsanitize=undefined -Werror" || { cat config.log && exit 1; }
- env:
- CONFIG="--disable-user --target-list-exclude=${MAIN_SOFTMMU_TARGETS}"
compiler: clang
# Sparse is GCC only
- env: CONFIG="--enable-sparse"
compiler: gcc
# gprof/gcov are GCC features
- env:
- CONFIG="--enable-gprof --enable-gcov --disable-pie --target-list=${MAIN_SOFTMMU_TARGETS}"
after_success:
- ${SRC_DIR}/scripts/travis/coverage-summary.sh
- env: CONFIG="--enable-gprof --enable-gcov --disable-pie"
compiler: gcc
# We manually include builds which we disable "make check" for
- env:
- CONFIG="--without-default-devices --disable-user"
- TEST_CMD=""
# We manually include builds which we disable "make check" for
- env:
- CONFIG="--enable-debug --enable-tcg-interpreter"
- TEST_CMD=""
# We don't need to exercise every backend with every front-end
- env:
- CONFIG="--enable-trace-backends=log,simple,syslog --disable-system"
- TEST_CMD=""
- env:
- CONFIG="--enable-trace-backends=ftrace --target-list=x86_64-softmmu"
- TEST_CMD=""
- env:
- CONFIG="--enable-trace-backends=ust --target-list=x86_64-softmmu"
- TEST_CMD=""
# MacOSX builds
- env:
- CONFIG="--target-list=${MAIN_SOFTMMU_TARGETS}"
- env: CONFIG="--enable-debug --enable-tcg-interpreter"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--enable-trace-backends=simple"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--enable-trace-backends=ftrace"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--enable-trace-backends=ust"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--with-coroutine=gthread"
TEST_CMD=""
compiler: gcc
- env: CONFIG=""
os: osx
osx_image: xcode9.4
compiler: clang
- env:
- CONFIG="--target-list=i386-softmmu,ppc-softmmu,ppc64-softmmu,m68k-softmmu,x86_64-softmmu"
os: osx
osx_image: xcode10.2
compiler: clang
# Python builds
- env:
- CONFIG="--target-list=x86_64-softmmu"
language: python
python:
- "3.4"
- env:
- CONFIG="--target-list=x86_64-softmmu"
language: python
python:
- "3.6"
# Acceptance (Functional) tests
- env:
- CONFIG="--python=/usr/bin/python3 --target-list=x86_64-softmmu,mips-softmmu,mips64el-softmmu,aarch64-softmmu,arm-softmmu,s390x-softmmu,alpha-softmmu"
- TEST_CMD="make check-acceptance"
after_failure:
- cat tests/results/latest/job.log
addons:
apt:
packages:
- python3-pip
- python3.5-venv
# Using newer GCC with sanitizers
- addons:
apt:
update: true
sources:
# PPAs for newer toolchains
- ubuntu-toolchain-r-test
packages:
# Extra toolchains
- gcc-9
- g++-9
# Build dependencies
- libaio-dev
- libattr1-dev
- libbrlapi-dev
- libcap-ng-dev
- libgnutls-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
- libnfs-dev
- libncurses5-dev
- libnss3-dev
- libpixman-1-dev
- libpng12-dev
- librados-dev
- libsdl1.2-dev
- libseccomp-dev
- libspice-protocol-dev
- libspice-server-dev
- libssh-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvte-2.91-dev
- sparse
- uuid-dev
language: generic
compiler: none
env:
- COMPILER_NAME=gcc CXX=g++-9 CC=gcc-9
- CONFIG="--cc=gcc-9 --cxx=g++-9 --disable-pie --disable-linux-user"
- TEST_CMD=""
before_script:
- ./configure ${CONFIG} --extra-cflags="-g3 -O0 -Wno-error=stringop-truncation -fsanitize=thread -fuse-ld=gold" || { cat config.log && exit 1; }
# Run check-tcg against linux-user
- env:
- CONFIG="--disable-system"
- TEST_CMD="make -j3 check-tcg V=1"
# Run check-tcg against softmmu targets
- env:
- CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
- TEST_CMD="make -j3 check-tcg V=1"

View File

@@ -9,7 +9,7 @@ patches before submitting.
Of course, the most important aspect in any coding style is whitespace.
Crusty old coders who have trouble spotting the glasses on their noses
can tell the difference between a tab and eight spaces from a distance
of approximately fifteen parsecs. Many a flamewar has been fought and
of approximately fifteen parsecs. Many a flamewar have been fought and
lost on this issue.
QEMU indents are four spaces. Tabs are never used, except in Makefiles
@@ -29,52 +29,9 @@ Spaces of course are superior to tabs because:
Do not leave whitespace dangling off the ends of lines.
1.1 Multiline Indent
There are several places where indent is necessary:
- if/else
- while/for
- function definition & call
When breaking up a long line to fit within line width, we need a proper indent
for the following lines.
In case of if/else, while/for, align the secondary lines just after the
opening parenthesis of the first.
For example:
if (a == 1 &&
b == 2) {
while (a == 1 &&
b == 2) {
In case of function, there are several variants:
* 4 spaces indent from the beginning
* align the secondary lines just after the opening parenthesis of the
first
For example:
do_something(x, y,
z);
do_something(x, y,
z);
do_something(x, do_another(y,
z));
2. Line width
Lines should be 80 characters; try not to make them longer.
Sometimes it is hard to do, especially when dealing with QEMU subsystems
that use long function or symbol names. Even in that case, do not make
lines much longer than 80 characters.
Lines are 80 characters; not longer.
Rationale:
- Some people like to tile their 24" screens with a 6x4 matrix of 80x24
@@ -82,8 +39,6 @@ Rationale:
let them keep doing it.
- Code and especially patches is much more readable if limited to a sane
line length. Eighty is traditional.
- The four-space indentation makes the most common excuse ("But look
at all that white space on the left!") moot.
- It is the QEMU coding style.
3. Naming
@@ -147,70 +102,11 @@ block to a separate function altogether.
When comparing a variable for (in)equality with a constant, list the
constant on the right, as in:
if (a == 1) {
/* Reads like: "If a equals 1" */
do_something();
}
if (a == 1) {
/* Reads like: "If a equals 1" */
do_something();
}
Rationale: Yoda conditions (as in 'if (1 == a)') are awkward to read.
Besides, good compilers already warn users when '==' is mis-typed as '=',
even when the constant is on the right.
7. Comment style
We use traditional C-style /* */ comments and avoid // comments.
Rationale: The // form is valid in C99, so this is purely a matter of
consistency of style. The checkpatch script will warn you about this.
Multiline comment blocks should have a row of stars on the left,
and the initial /* and terminating */ both on their own lines:
/*
* like
* this
*/
This is the same format required by the Linux kernel coding style.
(Some of the existing comments in the codebase use the GNU Coding
Standards form which does not have stars on the left, or other
variations; avoid these when writing new comments, but don't worry
about converting to the preferred form unless you're editing that
comment anyway.)
Rationale: Consistency, and ease of visually picking out a multiline
comment from the surrounding code.
8. trace-events style
8.1 0x prefix
In trace-events files, use a '0x' prefix to specify hex numbers, as in:
some_trace(unsigned x, uint64_t y) "x 0x%x y 0x" PRIx64
An exception is made for groups of numbers that are hexadecimal by
convention and separated by the symbols '.', '/', ':', or ' ' (such as
PCI bus id):
another_trace(int cssid, int ssid, int dev_num) "bus id: %x.%x.%04x"
However, you can use '0x' for such groups if you want. Anyway, be sure that
it is obvious that numbers are in hex, ex.:
data_dump(uint8_t c1, uint8_t c2, uint8_t c3) "bytes (in hex): %02x %02x %02x"
Rationale: hex numbers are hard to read in logs when there is no 0x prefix,
especially when (occasionally) the representation doesn't contain any letters
and especially in one line with other decimal numbers. Number groups are allowed
to not use '0x' because for some things notations like %x.%x.%x are used not
only in Qemu. Also dumping raw data bytes with '0x' is less readable.
8.2 '#' printf flag
Do not use printf flag '#', like '%#x'.
Rationale: there are two ways to add a '0x' prefix to printed number: '0x%...'
and '%#...'. For consistency the only one way should be used. Arguments for
'0x%' are:
- it is more popular
- '%#' omits the 0x for the value 0 which makes output inconsistent

View File

@@ -1,8 +1,8 @@
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
@@ -10,7 +10,7 @@
as the successor of the GNU Library Public License, version 2, hence
the version number 2.1.]
Preamble
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
@@ -112,7 +112,7 @@ modification follow. Pay close attention to the difference between a
former contains code derived from the library, whereas the latter must
be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other
@@ -146,7 +146,7 @@ such a program is covered only if its contents constitute a work based
on the Library (independent of the use of the Library in a tool for
writing it). Whether that is true depends on what the Library does
and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
@@ -432,7 +432,7 @@ decision will be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
@@ -455,7 +455,7 @@ FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
@@ -476,7 +476,7 @@ convey the exclusion of warranty; and each file should have at least the
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -485,7 +485,7 @@ convey the exclusion of warranty; and each file should have at least the
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
@@ -500,3 +500,5 @@ necessary. Here is a sample; alter the names:
Ty Coon, President of Vice
That's all there is to it!

View File

@@ -1,6 +1,6 @@
This file documents changes for QEMU releases 0.12 and earlier.
For changelog information for later releases, see
https://wiki.qemu.org/ChangeLog or look at the git history for
http://wiki.qemu-project.org/ChangeLog or look at the git history for
more detailed information.

31
HACKING
View File

@@ -1,28 +1,10 @@
1. Preprocessor
1.1. Variadic macros
For variadic macros, stick with this C99-like syntax:
#define DPRINTF(fmt, ...) \
do { printf("IRQ: " fmt, ## __VA_ARGS__); } while (0)
1.2. Include directives
Order include directives as follows:
#include "qemu/osdep.h" /* Always first... */
#include <...> /* then system headers... */
#include "..." /* and finally QEMU headers. */
The "qemu/osdep.h" header contains preprocessor macros that affect the behavior
of core system headers like <stdint.h>. It must be the first include so that
core system headers included by external libraries get the preprocessor macros
that QEMU depends on.
Do not include "qemu/osdep.h" from header files since the .c file will have
already included it.
2. C types
It should be common sense to use the right type, but we have collected
@@ -118,15 +100,6 @@ Please note that g_malloc will exit on allocation failure, so there
is no need to test for failure (as you would have to with malloc).
Calling g_malloc with a zero size is valid and will return NULL.
Prefer g_new(T, n) instead of g_malloc(sizeof(T) * n) for the following
reasons:
a. It catches multiplication overflowing size_t;
b. It returns T * instead of void *, letting compiler catch more type
errors.
Declarations like T *v = g_malloc(sizeof(*v)) are acceptable, though.
Memory allocated by qemu_memalign or qemu_blockalign must be freed with
qemu_vfree, since breaking this will cause problems on Win32.
@@ -185,10 +158,6 @@ painful. These are:
* you may assume that right shift of a signed integer duplicates
the sign bit (ie it is an arithmetic shift, not a logical shift)
In addition, QEMU assumes that the compiler does not use the latitude
given in C99 and C11 to treat aspects of signed '<<' as undefined, as
documented in the GNU Compiler Collection manual starting at version 4.0.
7. Error handling and reporting
7.1 Reporting errors to the human user

View File

@@ -1,36 +0,0 @@
# These are "proxy" symbols used to pass config-host.mak values
# down to Kconfig. See also MINIKCONF_ARGS in the Makefile:
# these two need to be kept in sync.
config KVM
bool
config LINUX
bool
config OPENGL
bool
config X11
bool
config SPICE
bool
config IVSHMEM
bool
config TPM
bool
config VHOST_USER
bool
config XEN
bool
config VIRTFS
bool
config PVRDMA
bool

File diff suppressed because it is too large Load Diff

992
Makefile

File diff suppressed because it is too large Load Diff

View File

@@ -1,23 +1,20 @@
#######################################################################
# Common libraries for tools and emulators
stub-obj-y = stubs/ util/ crypto/
stub-obj-y = stubs/ crypto/
util-obj-y = util/ qobject/ qapi/
chardev-obj-y = chardev/
#######################################################################
# authz-obj-y is code used by both qemu system emulation and qemu-img
authz-obj-y = authz/
util-obj-y += qmp-introspect.o qapi-types.o qapi-visit.o qapi-event.o
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y = nbd/
block-obj-y += block.o blockjob.o job.o
block-obj-y += block/ scsi/
block-obj-y = async.o thread-pool.o
block-obj-y += nbd/
block-obj-y += block.o blockjob.o
block-obj-y += main-loop.o iohandler.o qemu-timer.o
block-obj-$(CONFIG_POSIX) += aio-posix.o
block-obj-$(CONFIG_WIN32) += aio-win32.o
block-obj-y += block/
block-obj-y += qemu-io-cmds.o
block-obj-$(CONFIG_REPLICATION) += replication.o
block-obj-m = block/
@@ -25,7 +22,7 @@ block-obj-m = block/
# crypto-obj-y is code used by both qemu system emulation and qemu-img
crypto-obj-y = crypto/
crypto-user-obj-y = crypto/
crypto-aes-obj-y = crypto/
#######################################################################
# qom-obj-y is code used by both qemu system emulation and qemu-img
@@ -44,9 +41,7 @@ io-obj-y = io/
ifeq ($(CONFIG_SOFTMMU),y)
common-obj-y = blockdev.o blockdev-nbd.o block/
common-obj-y += bootdevice.o iothread.o
common-obj-y += job-qmp.o
common-obj-y += monitor/
common-obj-y += iothread.o
common-obj-y += net/
common-obj-y += qdev-monitor.o device-hotplug.o
common-obj-$(CONFIG_WIN32) += os-win32.o
@@ -55,42 +50,46 @@ common-obj-$(CONFIG_POSIX) += os-posix.o
common-obj-$(CONFIG_LINUX) += fsdev/
common-obj-y += migration/
common-obj-y += qemu-char.o #aio.o
common-obj-y += page_cache.o
common-obj-y += qjson.o
common-obj-$(CONFIG_SPICE) += spice-qemu-char.o
common-obj-y += audio/
common-obj-m += audio/
common-obj-y += hw/
common-obj-y += accel.o
common-obj-y += replay/
common-obj-y += ui/
common-obj-m += ui/
common-obj-y += bt-host.o bt-vhci.o
bt-host.o-cflags := $(BLUEZ_CFLAGS)
common-obj-y += dma-helpers.o
common-obj-y += vl.o
vl.o-cflags := $(GPROF_CFLAGS) $(SDL_CFLAGS)
common-obj-$(CONFIG_TPM) += tpm.o
common-obj-y += tpm.o
common-obj-$(CONFIG_SLIRP) += slirp/
common-obj-y += backends/
common-obj-y += chardev/
common-obj-$(CONFIG_SECCOMP) += qemu-seccomp.o
qemu-seccomp.o-cflags := $(SECCOMP_CFLAGS)
qemu-seccomp.o-libs := $(SECCOMP_LIBS)
common-obj-$(CONFIG_FDT) += device_tree.o
######################################################################
# qapi
common-obj-y += qapi/
common-obj-y += monitor/
common-obj-y += qmp-marshal.o
common-obj-y += qmp-introspect.o
common-obj-y += qmp.o hmp.o
endif
#######################################################################
# Target-independent parts used in system and user emulation
common-obj-y += cpus-common.o
common-obj-y += tcg-runtime.o
common-obj-y += hw/
common-obj-y += qom/
common-obj-y += disas/
@@ -98,116 +97,22 @@ common-obj-y += disas/
######################################################################
# Resource file for Windows executables
version-obj-$(CONFIG_WIN32) += $(BUILD_DIR)/version.o
version-lobj-$(CONFIG_WIN32) += $(BUILD_DIR)/version.lo
######################################################################
# tracing
util-obj-y += trace/
target-obj-y += trace/
######################################################################
# guest agent
# FIXME: a few definitions from qapi/qapi-types.o and
# qapi/qapi-visit.o are needed by libqemuutil.a. These should be
# extracted into a QAPI schema module, or perhaps a separate schema.
# FIXME: a few definitions from qapi-types.o/qapi-visit.o are needed
# by libqemuutil.a. These should be moved to a separate .json schema.
qga-obj-y = qga/
qga-vss-dll-obj-y = qga/
######################################################################
# contrib
elf2dmp-obj-y = contrib/elf2dmp/
ivshmem-client-obj-$(CONFIG_IVSHMEM) = contrib/ivshmem-client/
ivshmem-server-obj-$(CONFIG_IVSHMEM) = contrib/ivshmem-server/
libvhost-user-obj-y = contrib/libvhost-user/
vhost-user-scsi.o-cflags := $(LIBISCSI_CFLAGS)
vhost-user-scsi.o-libs := $(LIBISCSI_LIBS)
vhost-user-scsi-obj-y = contrib/vhost-user-scsi/
vhost-user-blk-obj-y = contrib/vhost-user-blk/
rdmacm-mux-obj-y = contrib/rdmacm-mux/
vhost-user-input-obj-y = contrib/vhost-user-input/
vhost-user-gpu-obj-y = contrib/vhost-user-gpu/
######################################################################
trace-events-subdirs =
trace-events-subdirs += accel/kvm
trace-events-subdirs += accel/tcg
trace-events-subdirs += crypto
trace-events-subdirs += monitor
ifeq ($(CONFIG_USER_ONLY),y)
trace-events-subdirs += linux-user
endif
ifeq ($(CONFIG_BLOCK),y)
trace-events-subdirs += authz
trace-events-subdirs += block
trace-events-subdirs += io
trace-events-subdirs += nbd
trace-events-subdirs += scsi
endif
ifeq ($(CONFIG_SOFTMMU),y)
trace-events-subdirs += chardev
trace-events-subdirs += audio
trace-events-subdirs += hw/9pfs
trace-events-subdirs += hw/acpi
trace-events-subdirs += hw/alpha
trace-events-subdirs += hw/arm
trace-events-subdirs += hw/audio
trace-events-subdirs += hw/block
trace-events-subdirs += hw/block/dataplane
trace-events-subdirs += hw/char
trace-events-subdirs += hw/dma
trace-events-subdirs += hw/hppa
trace-events-subdirs += hw/i2c
trace-events-subdirs += hw/i386
trace-events-subdirs += hw/i386/xen
trace-events-subdirs += hw/ide
trace-events-subdirs += hw/input
trace-events-subdirs += hw/intc
trace-events-subdirs += hw/isa
trace-events-subdirs += hw/mem
trace-events-subdirs += hw/mips
trace-events-subdirs += hw/misc
trace-events-subdirs += hw/misc/macio
trace-events-subdirs += hw/net
trace-events-subdirs += hw/nvram
trace-events-subdirs += hw/pci
trace-events-subdirs += hw/pci-host
trace-events-subdirs += hw/ppc
trace-events-subdirs += hw/rdma
trace-events-subdirs += hw/rdma/vmw
trace-events-subdirs += hw/s390x
trace-events-subdirs += hw/scsi
trace-events-subdirs += hw/sd
trace-events-subdirs += hw/sparc
trace-events-subdirs += hw/sparc64
trace-events-subdirs += hw/timer
trace-events-subdirs += hw/tpm
trace-events-subdirs += hw/usb
trace-events-subdirs += hw/vfio
trace-events-subdirs += hw/virtio
trace-events-subdirs += hw/watchdog
trace-events-subdirs += hw/xen
trace-events-subdirs += hw/gpio
trace-events-subdirs += hw/riscv
trace-events-subdirs += migration
trace-events-subdirs += net
trace-events-subdirs += ui
endif
trace-events-subdirs += hw/display
trace-events-subdirs += qapi
trace-events-subdirs += qom
trace-events-subdirs += target/arm
trace-events-subdirs += target/hppa
trace-events-subdirs += target/i386
trace-events-subdirs += target/mips
trace-events-subdirs += target/ppc
trace-events-subdirs += target/riscv
trace-events-subdirs += target/s390x
trace-events-subdirs += target/sparc
trace-events-subdirs += util
trace-events-files = $(SRC_PATH)/trace-events $(trace-events-subdirs:%=$(SRC_PATH)/%/trace-events)
trace-obj-y = trace-root.o
trace-obj-y += $(trace-events-subdirs:%=%/trace.o)
trace-obj-$(CONFIG_TRACE_UST) += trace-ust-all.o
trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace-root.o
trace-obj-$(CONFIG_TRACE_DTRACE) += $(trace-events-subdirs:%=%/trace-dtrace.o)
ivshmem-client-obj-y = contrib/ivshmem-client/
ivshmem-server-obj-y = contrib/ivshmem-server/

View File

@@ -4,19 +4,16 @@ BUILD_DIR?=$(CURDIR)/..
include ../config-host.mak
include config-target.mak
include $(SRC_PATH)/rules.mak
ifdef CONFIG_SOFTMMU
include config-devices.mak
endif
include $(SRC_PATH)/rules.mak
$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
ifdef CONFIG_LINUX
QEMU_CFLAGS += -I../linux-headers
endif
QEMU_CFLAGS += -iquote .. -iquote $(SRC_PATH)/target/$(TARGET_BASE_ARCH) -DNEED_CPU_H
QEMU_CFLAGS += -I.. -I$(SRC_PATH)/target-$(TARGET_BASE_ARCH) -DNEED_CPU_H
QEMU_CFLAGS+=-iquote $(SRC_PATH)/include
QEMU_CFLAGS+=-I$(SRC_PATH)/include
ifdef CONFIG_USER_ONLY
# user emulator name
@@ -25,11 +22,11 @@ QEMU_PROG_BUILD = $(QEMU_PROG)
else
# system emulator name
QEMU_PROG=qemu-system-$(TARGET_NAME)$(EXESUF)
ifneq (,$(findstring -mwindows,$(SDL_LIBS)))
ifneq (,$(findstring -mwindows,$(libs_softmmu)))
# Terminate program name with a 'w' because the linker builds a windows executable.
QEMU_PROGW=qemu-system-$(TARGET_NAME)w$(EXESUF)
$(QEMU_PROG): $(QEMU_PROGW)
$(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG),"GEN","$(TARGET_DIR)$(QEMU_PROG)")
$(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG)," GEN $(TARGET_DIR)$(QEMU_PROG)")
QEMU_PROG_BUILD = $(QEMU_PROGW)
else
QEMU_PROG_BUILD = $(QEMU_PROG)
@@ -39,14 +36,11 @@ endif
PROGS=$(QEMU_PROG) $(QEMU_PROGW)
STPFILES=
# Makefile Tests
include $(SRC_PATH)/tests/tcg/Makefile.include
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp $(QEMU_PROG)-log.stp
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
@@ -54,81 +48,70 @@ else
TARGET_TYPE=system
endif
tracetool-y = $(SRC_PATH)/scripts/tracetool.py
tracetool-y += $(shell find $(SRC_PATH)/scripts/tracetool -name "*.py")
$(QEMU_PROG).stp-installed: $(BUILD_DIR)/trace-events-all $(tracetool-y)
$(QEMU_PROG).stp-installed: $(SRC_PATH)/trace-events
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=stap \
--backends=$(TRACE_BACKENDS) \
--binary=$(bindir)/$(QEMU_PROG) \
--target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG).stp-installed")
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG).stp-installed")
$(QEMU_PROG).stp: $(BUILD_DIR)/trace-events-all $(tracetool-y)
$(QEMU_PROG).stp: $(SRC_PATH)/trace-events
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=stap \
--backends=$(TRACE_BACKENDS) \
--binary=$(realpath .)/$(QEMU_PROG) \
--target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG).stp")
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG).stp")
$(QEMU_PROG)-simpletrace.stp: $(BUILD_DIR)/trace-events-all $(tracetool-y)
$(QEMU_PROG)-simpletrace.stp: $(SRC_PATH)/trace-events
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=simpletrace-stap \
--backends=$(TRACE_BACKENDS) \
--probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
$(QEMU_PROG)-log.stp: $(BUILD_DIR)/trace-events-all $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=log-stap \
--backends=$(TRACE_BACKENDS) \
--probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-log.stp")
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
else
stap:
endif
.PHONY: stap
all: $(PROGS) stap
# Dummy command so that make thinks it has done something
@true
obj-y += trace/
#########################################################
# cpu emulator library
obj-y += exec.o
obj-y += accel/
obj-$(CONFIG_TCG) += tcg/tcg.o tcg/tcg-op.o tcg/tcg-op-vec.o tcg/tcg-op-gvec.o
obj-$(CONFIG_TCG) += tcg/tcg-common.o tcg/optimize.o
obj-$(CONFIG_TCG_INTERPRETER) += tcg/tci.o
obj-y = exec.o translate-all.o cpu-exec.o
obj-y += translate-common.o
obj-y += cpu-exec-common.o
obj-y += tcg/tcg.o tcg/tcg-op.o tcg/optimize.o
obj-$(CONFIG_TCG_INTERPRETER) += tci.o
obj-y += tcg/tcg-common.o
obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
obj-$(CONFIG_TCG) += fpu/softfloat.o
obj-y += target/$(TARGET_BASE_ARCH)/
obj-y += fpu/softfloat.o
obj-y += target-$(TARGET_BASE_ARCH)/
obj-y += disas.o
obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decContext.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decNumber.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal32.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal64.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal128.o
#########################################################
# Linux user emulator target
ifdef CONFIG_LINUX_USER
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) \
-I$(SRC_PATH)/linux-user/host/$(ARCH) \
-I$(SRC_PATH)/linux-user
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) -I$(SRC_PATH)/linux-user
obj-y += linux-user/
obj-y += gdbstub.o thunk.o
obj-y += gdbstub.o thunk.o user-exec.o
endif #CONFIG_LINUX_USER
@@ -141,25 +124,29 @@ QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR) \
-I$(SRC_PATH)/bsd-user/$(HOST_VARIANT_DIR)
obj-y += bsd-user/
obj-y += gdbstub.o
obj-y += gdbstub.o user-exec.o
endif #CONFIG_BSD_USER
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
obj-y += arch_init.o cpus.o gdbstub.o balloon.o ioport.o numa.o
obj-y += qtest.o
obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o numa.o
obj-y += qtest.o bootdevice.o
obj-y += hw/
obj-y += monitor/
obj-y += qapi/
obj-y += memory.o
obj-$(CONFIG_KVM) += kvm-all.o
obj-y += memory.o cputlb.o
obj-y += memory_mapping.o
obj-y += dump.o
obj-$(TARGET_X86_64) += win_dump.o
obj-y += migration/ram.o
obj-y += migration/ram.o migration/savevm.o
LIBS := $(libs_softmmu) $(LIBS)
# xen support
obj-$(CONFIG_XEN) += xen-common.o
obj-$(CONFIG_XEN_I386) += xen-hvm.o xen-mapcache.o
obj-$(call lnot,$(CONFIG_XEN)) += xen-common-stub.o
obj-$(call lnot,$(CONFIG_XEN_I386)) += xen-hvm-stub.o
# Hardware support
ifeq ($(TARGET_NAME), sparc64)
obj-y += hw/sparc64/
@@ -167,61 +154,66 @@ else
obj-y += hw/$(TARGET_BASE_ARCH)/
endif
generated-files-y += hmp-commands.h hmp-commands-info.h
GENERATED_HEADERS += hmp-commands.h hmp-commands-info.h qmp-commands-old.h
endif # CONFIG_SOFTMMU
# Workaround for http://gcc.gnu.org/PR55489, see configure.
%/translate.o: QEMU_CFLAGS += $(TRANSLATE_OPT_CFLAGS)
dummy := $(call unnest-vars,,obj-y)
all-obj-y := $(obj-y)
target-obj-y :=
block-obj-y :=
common-obj-y :=
include $(SRC_PATH)/Makefile.objs
dummy := $(call unnest-vars,,target-obj-y)
target-obj-y-save := $(target-obj-y)
dummy := $(call unnest-vars,.., \
authz-obj-y \
block-obj-y \
block-obj-m \
chardev-obj-y \
crypto-obj-y \
crypto-user-obj-y \
crypto-aes-obj-y \
qom-obj-y \
io-obj-y \
common-obj-y \
common-obj-m)
target-obj-y := $(target-obj-y-save)
all-obj-y += $(common-obj-y)
all-obj-y += $(target-obj-y)
all-obj-y += $(qom-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(authz-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y)
all-obj-$(CONFIG_USER_ONLY) += $(crypto-user-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y)
all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
ifdef CONFIG_SOFTMMU
$(QEMU_PROG_BUILD): config-devices.mak
endif
COMMON_LDADDS = ../libqemuutil.a
# build either PROG or PROGW
$(QEMU_PROG_BUILD): $(all-obj-y) $(COMMON_LDADDS)
$(QEMU_PROG_BUILD): $(all-obj-y) ../libqemuutil.a ../libqemustub.a
$(call LINK, $(filter-out %.mak, $^))
ifdef CONFIG_DARWIN
$(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@,"REZ","$(TARGET_DIR)$@")
$(call quiet-command,SetFile -a C $@,"SETFILE","$(TARGET_DIR)$@")
$(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@," REZ $(TARGET_DIR)$@")
$(call quiet-command,SetFile -a C $@," SETFILE $(TARGET_DIR)$@")
endif
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES),"GEN","$(TARGET_DIR)$@")
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES)," GEN $(TARGET_DIR)$@")
hmp-commands.h: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$(TARGET_DIR)$@")
hmp-commands.h: $(SRC_PATH)/hmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
hmp-commands-info.h: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$(TARGET_DIR)$@")
hmp-commands-info.h: $(SRC_PATH)/hmp-commands-info.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
clean: clean-target
qmp-commands-old.h: $(SRC_PATH)/qmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
clean:
rm -f *.a *~ $(PROGS)
rm -f $(shell find . -name '*.[od]')
rm -f hmp-commands.h gdbstub-xml.c
rm -f trace/generated-helpers.c trace/generated-helpers.c-timestamp
rm -f hmp-commands.h qmp-commands-old.h gdbstub-xml.c
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
@@ -234,24 +226,7 @@ ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
$(INSTALL_DATA) $(QEMU_PROG)-simpletrace.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-simpletrace.stp"
$(INSTALL_DATA) $(QEMU_PROG)-log.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-log.stp"
endif
generated-files-y += config-target.h
Makefile: $(generated-files-y)
# Reports/Analysis
#
# The target specific coverage report only cares about target specific
# blobs and not the shared code.
#
%/coverage-report.html:
@mkdir -p $*
$(call quiet-command,\
gcovr -r $(SRC_PATH) --object-directory $(CURDIR) \
-p --html --html-details -o $@, \
"GEN", "coverage-report.html")
.PHONY: coverage-report
coverage-report: $(CURDIR)/reports/coverage/coverage-report.html
GENERATED_HEADERS += config-target.h
Makefile: $(GENERATED_HEADERS)

54
README
View File

@@ -42,11 +42,12 @@ of other UNIX targets. The simple steps to build QEMU are:
../configure
make
Complete details of the process for building and configuring QEMU for
all supported host platforms can be found in the qemu-tech.html file.
Additional information can also be found online via the QEMU website:
https://qemu.org/Hosts/Linux
https://qemu.org/Hosts/Mac
https://qemu.org/Hosts/W32
http://qemu-project.org/Hosts/Linux
http://qemu-project.org/Hosts/W32
Submitting patches
@@ -54,9 +55,9 @@ Submitting patches
The QEMU source code is maintained under the GIT version control system.
git clone https://git.qemu.org/git/qemu.git
git clone git://git.qemu-project.org/qemu.git
When submitting patches, one common approach is to use 'git
When submitting patches, the preferred approach is to use 'git
format-patch' and/or 'git send-email' to format & send the mail to the
qemu-devel@nongnu.org mailing list. All patches submitted must contain
a 'Signed-off-by' line from the author. Patches should follow the
@@ -65,42 +66,9 @@ guidelines set out in the HACKING and CODING_STYLE files.
Additional information on submitting patches can be found online via
the QEMU website
https://qemu.org/Contribute/SubmitAPatch
https://qemu.org/Contribute/TrivialPatches
http://qemu-project.org/Contribute/SubmitAPatch
http://qemu-project.org/Contribute/TrivialPatches
The QEMU website is also maintained under source control.
git clone https://git.qemu.org/git/qemu-web.git
https://www.qemu.org/2017/02/04/the-new-qemu-website-is-up/
A 'git-publish' utility was created to make above process less
cumbersome, and is highly recommended for making regular contributions,
or even just for sending consecutive patch series revisions. It also
requires a working 'git send-email' setup, and by default doesn't
automate everything, so you may want to go through the above steps
manually for once.
For installation instructions, please go to
https://github.com/stefanha/git-publish
The workflow with 'git-publish' is:
$ git checkout master -b my-feature
$ # work on new commits, add your 'Signed-off-by' lines to each
$ git publish
Your patch series will be sent and tagged as my-feature-v1 if you need to refer
back to it in the future.
Sending v2:
$ git checkout my-feature # same topic branch
$ # making changes to the commits (using 'git rebase', for example)
$ git publish
Your patch series will be sent with 'v2' tag in the subject and the git tip
will be tagged as my-feature-v2.
Bug reporting
=============
@@ -118,7 +86,7 @@ reported via launchpad.
For additional information on bug reporting consult:
https://qemu.org/Contribute/ReportABug
http://qemu-project.org/Contribute/ReportABug
Contact
@@ -128,12 +96,12 @@ The QEMU community can be contacted in a number of ways, with the two
main methods being email and IRC
- qemu-devel@nongnu.org
https://lists.nongnu.org/mailman/listinfo/qemu-devel
http://lists.nongnu.org/mailman/listinfo/qemu-devel
- #qemu on irc.oftc.net
Information on additional methods of contacting the community can be
found online via the QEMU website:
https://qemu.org/Contribute/StartHere
http://qemu-project.org/Contribute/StartHere
-- End

View File

@@ -1 +1 @@
4.0.50
2.6.1

158
accel.c Normal file
View File

@@ -0,0 +1,158 @@
/*
* QEMU System Emulator, accelerator interfaces
*
* Copyright (c) 2003-2008 Fabrice Bellard
* Copyright (c) 2014 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "sysemu/accel.h"
#include "hw/boards.h"
#include "qemu-common.h"
#include "sysemu/arch_init.h"
#include "sysemu/sysemu.h"
#include "sysemu/kvm.h"
#include "sysemu/qtest.h"
#include "hw/xen/xen.h"
#include "qom/object.h"
#include "hw/boards.h"
int tcg_tb_size;
static bool tcg_allowed = true;
static int tcg_init(MachineState *ms)
{
tcg_exec_init(tcg_tb_size * 1024 * 1024);
return 0;
}
static const TypeInfo accel_type = {
.name = TYPE_ACCEL,
.parent = TYPE_OBJECT,
.class_size = sizeof(AccelClass),
.instance_size = sizeof(AccelState),
};
/* Lookup AccelClass from opt_name. Returns NULL if not found */
static AccelClass *accel_find(const char *opt_name)
{
char *class_name = g_strdup_printf(ACCEL_CLASS_NAME("%s"), opt_name);
AccelClass *ac = ACCEL_CLASS(object_class_by_name(class_name));
g_free(class_name);
return ac;
}
static int accel_init_machine(AccelClass *acc, MachineState *ms)
{
ObjectClass *oc = OBJECT_CLASS(acc);
const char *cname = object_class_get_name(oc);
AccelState *accel = ACCEL(object_new(cname));
int ret;
ms->accelerator = accel;
*(acc->allowed) = true;
ret = acc->init_machine(ms);
if (ret < 0) {
ms->accelerator = NULL;
*(acc->allowed) = false;
object_unref(OBJECT(accel));
}
return ret;
}
int configure_accelerator(MachineState *ms)
{
const char *p;
char buf[10];
int ret;
bool accel_initialised = false;
bool init_failed = false;
AccelClass *acc = NULL;
p = qemu_opt_get(qemu_get_machine_opts(), "accel");
if (p == NULL) {
/* Use the default "accelerator", tcg */
p = "tcg";
}
while (!accel_initialised && *p != '\0') {
if (*p == ':') {
p++;
}
p = get_opt_name(buf, sizeof(buf), p, ':');
acc = accel_find(buf);
if (!acc) {
fprintf(stderr, "\"%s\" accelerator not found.\n", buf);
continue;
}
if (acc->available && !acc->available()) {
printf("%s not supported for this target\n",
acc->name);
continue;
}
ret = accel_init_machine(acc, ms);
if (ret < 0) {
init_failed = true;
fprintf(stderr, "failed to initialize %s: %s\n",
acc->name,
strerror(-ret));
} else {
accel_initialised = true;
}
}
if (!accel_initialised) {
if (!init_failed) {
fprintf(stderr, "No accelerator found!\n");
}
exit(1);
}
if (init_failed) {
fprintf(stderr, "Back to %s accelerator.\n", acc->name);
}
return !accel_initialised;
}
static void tcg_accel_class_init(ObjectClass *oc, void *data)
{
AccelClass *ac = ACCEL_CLASS(oc);
ac->name = "tcg";
ac->init_machine = tcg_init;
ac->allowed = &tcg_allowed;
}
#define TYPE_TCG_ACCEL ACCEL_CLASS_NAME("tcg")
static const TypeInfo tcg_accel_type = {
.name = TYPE_TCG_ACCEL,
.parent = TYPE_ACCEL,
.class_init = tcg_accel_class_init,
};
static void register_accel_types(void)
{
type_register_static(&accel_type);
type_register_static(&tcg_accel_type);
}
type_init(register_accel_types);

View File

@@ -1,5 +0,0 @@
obj-$(CONFIG_SOFTMMU) += accel.o
obj-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_POSIX)) += qtest.o
obj-$(CONFIG_KVM) += kvm/
obj-$(CONFIG_TCG) += tcg/
obj-y += stubs/

View File

@@ -1,147 +0,0 @@
/*
* QEMU System Emulator, accelerator interfaces
*
* Copyright (c) 2003-2008 Fabrice Bellard
* Copyright (c) 2014 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "sysemu/accel.h"
#include "hw/boards.h"
#include "sysemu/arch_init.h"
#include "sysemu/sysemu.h"
#include "sysemu/kvm.h"
#include "sysemu/qtest.h"
#include "hw/xen/xen.h"
#include "qom/object.h"
#include "qemu/error-report.h"
#include "qemu/option.h"
#include "qapi/error.h"
static const TypeInfo accel_type = {
.name = TYPE_ACCEL,
.parent = TYPE_OBJECT,
.class_size = sizeof(AccelClass),
.instance_size = sizeof(AccelState),
};
/* Lookup AccelClass from opt_name. Returns NULL if not found */
static AccelClass *accel_find(const char *opt_name)
{
char *class_name = g_strdup_printf(ACCEL_CLASS_NAME("%s"), opt_name);
AccelClass *ac = ACCEL_CLASS(object_class_by_name(class_name));
g_free(class_name);
return ac;
}
static int accel_init_machine(AccelClass *acc, MachineState *ms)
{
ObjectClass *oc = OBJECT_CLASS(acc);
const char *cname = object_class_get_name(oc);
AccelState *accel = ACCEL(object_new(cname));
int ret;
ms->accelerator = accel;
*(acc->allowed) = true;
ret = acc->init_machine(ms);
if (ret < 0) {
ms->accelerator = NULL;
*(acc->allowed) = false;
object_unref(OBJECT(accel));
} else {
object_set_accelerator_compat_props(acc->compat_props);
}
return ret;
}
void configure_accelerator(MachineState *ms, const char *progname)
{
const char *accel;
char **accel_list, **tmp;
int ret;
bool accel_initialised = false;
bool init_failed = false;
AccelClass *acc = NULL;
accel = qemu_opt_get(qemu_get_machine_opts(), "accel");
if (accel == NULL) {
/* Select the default accelerator */
int pnlen = strlen(progname);
if (pnlen >= 3 && g_str_equal(&progname[pnlen - 3], "kvm")) {
/* If the program name ends with "kvm", we prefer KVM */
accel = "kvm:tcg";
} else {
#if defined(CONFIG_TCG)
accel = "tcg";
#elif defined(CONFIG_KVM)
accel = "kvm";
#else
error_report("No accelerator selected and"
" no default accelerator available");
exit(1);
#endif
}
}
accel_list = g_strsplit(accel, ":", 0);
for (tmp = accel_list; !accel_initialised && tmp && *tmp; tmp++) {
acc = accel_find(*tmp);
if (!acc) {
continue;
}
ret = accel_init_machine(acc, ms);
if (ret < 0) {
init_failed = true;
error_report("failed to initialize %s: %s",
acc->name, strerror(-ret));
} else {
accel_initialised = true;
}
}
g_strfreev(accel_list);
if (!accel_initialised) {
if (!init_failed) {
error_report("-machine accel=%s: No accelerator found", accel);
}
exit(1);
}
if (init_failed) {
error_report("Back to %s accelerator", acc->name);
}
}
void accel_setup_post(MachineState *ms)
{
AccelState *accel = ms->accelerator;
AccelClass *acc = ACCEL_GET_CLASS(accel);
if (acc->setup_post) {
acc->setup_post(ms, accel);
}
}
static void register_accel_types(void)
{
type_register_static(&accel_type);
}
type_init(register_accel_types);

View File

@@ -1,2 +0,0 @@
obj-y += kvm-all.o
obj-$(call lnot,$(CONFIG_SEV)) += sev-stub.o

View File

@@ -1,26 +0,0 @@
/*
* QEMU SEV stub
*
* Copyright Advanced Micro Devices 2018
*
* Authors:
* Brijesh Singh <brijesh.singh@amd.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "sysemu/sev.h"
int sev_encrypt_data(void *handle, uint8_t *ptr, uint64_t len)
{
abort();
}
void *sev_guest_init(const char *id)
{
return NULL;
}

View File

@@ -1,18 +0,0 @@
# See docs/devel/tracing.txt for syntax documentation.
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
kvm_vm_ioctl(int type, void *arg) "type 0x%x, arg %p"
kvm_vcpu_ioctl(int cpu_index, int type, void *arg) "cpu_index %d, type 0x%x, arg %p"
kvm_run_exit(int cpu_index, uint32_t reason) "cpu_index %d, reason %d"
kvm_device_ioctl(int fd, int type, void *arg) "dev fd %d, type 0x%x, arg %p"
kvm_failed_reg_get(uint64_t id, const char *msg) "Warning: Unable to retrieve ONEREG %" PRIu64 " from KVM: %s"
kvm_failed_reg_set(uint64_t id, const char *msg) "Warning: Unable to set ONEREG %" PRIu64 " to KVM: %s"
kvm_irqchip_commit_routes(void) ""
kvm_irqchip_add_msi_route(char *name, int vector, int virq) "dev %s vector %d virq %d"
kvm_irqchip_update_msi_route(int virq) "Updating MSI route virq=%d"
kvm_irqchip_release_virq(int virq) "virq %d"
kvm_set_ioeventfd_mmio(int fd, uint64_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%" PRIx64 " val=0x%x assign: %d size: %d match: %d"
kvm_set_ioeventfd_pio(int fd, uint16_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%x val=0x%x assign: %d size: %d match: %d"
kvm_set_user_memory(uint32_t slot, uint32_t flags, uint64_t guest_phys_addr, uint64_t memory_size, uint64_t userspace_addr, int ret) "Slot#%d flags=0x%x gpa=0x%"PRIx64 " size=0x%"PRIx64 " ua=0x%"PRIx64 " ret=%d"

View File

@@ -1,54 +0,0 @@
/*
* QTest accelerator code
*
* Copyright IBM, Corp. 2011
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/module.h"
#include "qemu/option.h"
#include "qemu/config-file.h"
#include "sysemu/accel.h"
#include "sysemu/qtest.h"
#include "sysemu/cpus.h"
static int qtest_init_accel(MachineState *ms)
{
QemuOpts *opts = qemu_opts_create(qemu_find_opts("icount"), NULL, 0,
&error_abort);
qemu_opt_set(opts, "shift", "0", &error_abort);
configure_icount(opts, &error_abort);
qemu_opts_del(opts);
return 0;
}
static void qtest_accel_class_init(ObjectClass *oc, void *data)
{
AccelClass *ac = ACCEL_CLASS(oc);
ac->name = "QTest";
ac->init_machine = qtest_init_accel;
ac->allowed = &qtest_allowed;
}
#define TYPE_QTEST_ACCEL ACCEL_CLASS_NAME("qtest")
static const TypeInfo qtest_accel_type = {
.name = TYPE_QTEST_ACCEL,
.parent = TYPE_ACCEL,
.class_init = qtest_accel_class_init,
};
static void qtest_type_init(void)
{
type_register_static(&qtest_accel_type);
}
type_init(qtest_type_init);

View File

@@ -1,5 +0,0 @@
obj-$(call lnot,$(CONFIG_HAX)) += hax-stub.o
obj-$(call lnot,$(CONFIG_HVF)) += hvf-stub.o
obj-$(call lnot,$(CONFIG_WHPX)) += whpx-stub.o
obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
obj-$(call lnot,$(CONFIG_TCG)) += tcg-stub.o

View File

@@ -1,33 +0,0 @@
/*
* QEMU HAXM support
*
* Copyright (c) 2015, Intel Corporation
*
* Copyright 2016 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "sysemu/hax.h"
int hax_sync_vcpus(void)
{
return 0;
}
int hax_init_vcpu(CPUState *cpu)
{
return -ENOSYS;
}
int hax_smp_cpu_exec(CPUState *cpu)
{
return -ENOSYS;
}

View File

@@ -1,30 +0,0 @@
/*
* QEMU HVF support
*
* Copyright 2017 Red Hat, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2 or later, as published by the Free Software Foundation,
* and may be copied, distributed, and modified under those terms.
*
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "sysemu/hvf.h"
int hvf_init_vcpu(CPUState *cpu)
{
return -ENOSYS;
}
int hvf_vcpu_exec(CPUState *cpu)
{
return -ENOSYS;
}
void hvf_vcpu_destroy(CPUState *cpu)
{
}

View File

@@ -1,172 +0,0 @@
/*
* QEMU KVM stub
*
* Copyright Red Hat, Inc. 2010
*
* Author: Paolo Bonzini <pbonzini@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "sysemu/kvm.h"
#ifndef CONFIG_USER_ONLY
#include "hw/pci/msi.h"
#endif
KVMState *kvm_state;
bool kvm_kernel_irqchip;
bool kvm_async_interrupts_allowed;
bool kvm_eventfds_allowed;
bool kvm_irqfds_allowed;
bool kvm_resamplefds_allowed;
bool kvm_msi_via_irqfd_allowed;
bool kvm_gsi_routing_allowed;
bool kvm_gsi_direct_mapping;
bool kvm_allowed;
bool kvm_readonly_mem_allowed;
bool kvm_ioeventfd_any_length_allowed;
bool kvm_msi_use_devid;
int kvm_destroy_vcpu(CPUState *cpu)
{
return -ENOSYS;
}
int kvm_init_vcpu(CPUState *cpu)
{
return -ENOSYS;
}
void kvm_flush_coalesced_mmio_buffer(void)
{
}
void kvm_cpu_synchronize_state(CPUState *cpu)
{
}
void kvm_cpu_synchronize_post_reset(CPUState *cpu)
{
}
void kvm_cpu_synchronize_post_init(CPUState *cpu)
{
}
int kvm_cpu_exec(CPUState *cpu)
{
abort();
}
bool kvm_has_sync_mmu(void)
{
return false;
}
int kvm_has_many_ioeventfds(void)
{
return 0;
}
int kvm_update_guest_debug(CPUState *cpu, unsigned long reinject_trap)
{
return -ENOSYS;
}
int kvm_insert_breakpoint(CPUState *cpu, target_ulong addr,
target_ulong len, int type)
{
return -EINVAL;
}
int kvm_remove_breakpoint(CPUState *cpu, target_ulong addr,
target_ulong len, int type)
{
return -EINVAL;
}
void kvm_remove_all_breakpoints(CPUState *cpu)
{
}
int kvm_on_sigbus_vcpu(CPUState *cpu, int code, void *addr)
{
return 1;
}
int kvm_on_sigbus(int code, void *addr)
{
return 1;
}
bool kvm_memcrypt_enabled(void)
{
return false;
}
int kvm_memcrypt_encrypt_data(uint8_t *ptr, uint64_t len)
{
return 1;
}
#ifndef CONFIG_USER_ONLY
int kvm_irqchip_add_msi_route(KVMState *s, int vector, PCIDevice *dev)
{
return -ENOSYS;
}
void kvm_init_irq_routing(KVMState *s)
{
}
void kvm_irqchip_release_virq(KVMState *s, int virq)
{
}
int kvm_irqchip_update_msi_route(KVMState *s, int virq, MSIMessage msg,
PCIDevice *dev)
{
return -ENOSYS;
}
void kvm_irqchip_commit_routes(KVMState *s)
{
}
int kvm_irqchip_add_adapter_route(KVMState *s, AdapterInfo *adapter)
{
return -ENOSYS;
}
int kvm_irqchip_add_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
EventNotifier *rn, int virq)
{
return -ENOSYS;
}
int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
int virq)
{
return -ENOSYS;
}
bool kvm_has_free_slot(MachineState *ms)
{
return false;
}
void kvm_init_cpu_signals(CPUState *cpu)
{
abort();
}
bool kvm_arm_supports_user_irq(void)
{
return false;
}
#endif

View File

@@ -1,26 +0,0 @@
/*
* QEMU TCG accelerator stub
*
* Copyright Red Hat, Inc. 2013
*
* Author: Paolo Bonzini <pbonzini@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "tcg/tcg.h"
#include "exec/cpu-common.h"
#include "exec/exec-all.h"
void tb_flush(CPUState *cpu)
{
}
void tlb_set_dirty(CPUState *cpu, target_ulong vaddr)
{
}

View File

@@ -1,47 +0,0 @@
/*
* QEMU Windows Hypervisor Platform accelerator (WHPX) stub
*
* Copyright Microsoft Corp. 2017
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "sysemu/whpx.h"
int whpx_init_vcpu(CPUState *cpu)
{
return -1;
}
int whpx_vcpu_exec(CPUState *cpu)
{
return -1;
}
void whpx_destroy_vcpu(CPUState *cpu)
{
}
void whpx_vcpu_kick(CPUState *cpu)
{
}
void whpx_cpu_synchronize_state(CPUState *cpu)
{
}
void whpx_cpu_synchronize_post_reset(CPUState *cpu)
{
}
void whpx_cpu_synchronize_post_init(CPUState *cpu)
{
}
void whpx_cpu_synchronize_pre_loadvm(CPUState *cpu)
{
}

View File

@@ -1,8 +0,0 @@
obj-$(CONFIG_SOFTMMU) += tcg-all.o
obj-$(CONFIG_SOFTMMU) += cputlb.o
obj-y += tcg-runtime.o tcg-runtime-gvec.o
obj-y += cpu-exec.o cpu-exec-common.o translate-all.o
obj-y += translator.o
obj-$(CONFIG_USER_ONLY) += user-exec.o
obj-$(call lnot,$(CONFIG_SOFTMMU)) += user-exec-stub.o

View File

@@ -1,368 +0,0 @@
/*
* Atomic helper templates
* Included from tcg-runtime.c and cputlb.c.
*
* Copyright (c) 2016 Red Hat, Inc
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "trace/mem.h"
#if DATA_SIZE == 16
# define SUFFIX o
# define DATA_TYPE Int128
# define BSWAP bswap128
# define SHIFT 4
#elif DATA_SIZE == 8
# define SUFFIX q
# define DATA_TYPE uint64_t
# define SDATA_TYPE int64_t
# define BSWAP bswap64
# define SHIFT 3
#elif DATA_SIZE == 4
# define SUFFIX l
# define DATA_TYPE uint32_t
# define SDATA_TYPE int32_t
# define BSWAP bswap32
# define SHIFT 2
#elif DATA_SIZE == 2
# define SUFFIX w
# define DATA_TYPE uint16_t
# define SDATA_TYPE int16_t
# define BSWAP bswap16
# define SHIFT 1
#elif DATA_SIZE == 1
# define SUFFIX b
# define DATA_TYPE uint8_t
# define SDATA_TYPE int8_t
# define BSWAP
# define SHIFT 0
#else
# error unsupported data size
#endif
#if DATA_SIZE >= 4
# define ABI_TYPE DATA_TYPE
#else
# define ABI_TYPE uint32_t
#endif
#define ATOMIC_TRACE_RMW do { \
uint8_t info = glue(trace_mem_build_info_no_se, MEND)(SHIFT, false); \
\
trace_guest_mem_before_exec(env_cpu(env), addr, info); \
trace_guest_mem_before_exec(env_cpu(env), addr, \
info | TRACE_MEM_ST); \
} while (0)
#define ATOMIC_TRACE_LD do { \
uint8_t info = glue(trace_mem_build_info_no_se, MEND)(SHIFT, false); \
\
trace_guest_mem_before_exec(env_cpu(env), addr, info); \
} while (0)
# define ATOMIC_TRACE_ST do { \
uint8_t info = glue(trace_mem_build_info_no_se, MEND)(SHIFT, true); \
\
trace_guest_mem_before_exec(env_cpu(env), addr, info); \
} while (0)
/* Define host-endian atomic operations. Note that END is used within
the ATOMIC_NAME macro, and redefined below. */
#if DATA_SIZE == 1
# define END
# define MEND _be /* either le or be would be fine */
#elif defined(HOST_WORDS_BIGENDIAN)
# define END _be
# define MEND _be
#else
# define END _le
# define MEND _le
#endif
ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE cmpv, ABI_TYPE newv EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
ATOMIC_TRACE_RMW;
#if DATA_SIZE == 16
ret = atomic16_cmpxchg(haddr, cmpv, newv);
#else
ret = atomic_cmpxchg__nocheck(haddr, cmpv, newv);
#endif
ATOMIC_MMU_CLEANUP;
return ret;
}
#if DATA_SIZE >= 16
#if HAVE_ATOMIC128
ABI_TYPE ATOMIC_NAME(ld)(CPUArchState *env, target_ulong addr EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE val, *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_LD;
val = atomic16_read(haddr);
ATOMIC_MMU_CLEANUP;
return val;
}
void ATOMIC_NAME(st)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_ST;
atomic16_set(haddr, val);
ATOMIC_MMU_CLEANUP;
}
#endif
#else
ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
ATOMIC_TRACE_RMW;
ret = atomic_xchg__nocheck(haddr, val);
ATOMIC_MMU_CLEANUP;
return ret;
}
#define GEN_ATOMIC_HELPER(X) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE val EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
DATA_TYPE ret; \
\
ATOMIC_TRACE_RMW; \
ret = atomic_##X(haddr, val); \
ATOMIC_MMU_CLEANUP; \
return ret; \
}
GEN_ATOMIC_HELPER(fetch_add)
GEN_ATOMIC_HELPER(fetch_and)
GEN_ATOMIC_HELPER(fetch_or)
GEN_ATOMIC_HELPER(fetch_xor)
GEN_ATOMIC_HELPER(add_fetch)
GEN_ATOMIC_HELPER(and_fetch)
GEN_ATOMIC_HELPER(or_fetch)
GEN_ATOMIC_HELPER(xor_fetch)
#undef GEN_ATOMIC_HELPER
/* These helpers are, as a whole, full barriers. Within the helper,
* the leading barrier is explicit and the trailing barrier is within
* cmpxchg primitive.
*
* Trace this load + RMW loop as a single RMW op. This way, regardless
* of CF_PARALLEL's value, we'll trace just a read and a write.
*/
#define GEN_ATOMIC_HELPER_FN(X, FN, XDATA_TYPE, RET) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE xval EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
XDATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
XDATA_TYPE cmp, old, new, val = xval; \
\
ATOMIC_TRACE_RMW; \
smp_mb(); \
cmp = atomic_read__nocheck(haddr); \
do { \
old = cmp; new = FN(old, val); \
cmp = atomic_cmpxchg__nocheck(haddr, old, new); \
} while (cmp != old); \
ATOMIC_MMU_CLEANUP; \
return RET; \
}
GEN_ATOMIC_HELPER_FN(fetch_smin, MIN, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umin, MIN, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_smax, MAX, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umax, MAX, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(smin_fetch, MIN, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umin_fetch, MIN, DATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(smax_fetch, MAX, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umax_fetch, MAX, DATA_TYPE, new)
#undef GEN_ATOMIC_HELPER_FN
#endif /* DATA SIZE >= 16 */
#undef END
#undef MEND
#if DATA_SIZE > 1
/* Define reverse-host-endian atomic operations. Note that END is used
within the ATOMIC_NAME macro. */
#ifdef HOST_WORDS_BIGENDIAN
# define END _le
# define MEND _le
#else
# define END _be
# define MEND _be
#endif
ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE cmpv, ABI_TYPE newv EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
ATOMIC_TRACE_RMW;
#if DATA_SIZE == 16
ret = atomic16_cmpxchg(haddr, BSWAP(cmpv), BSWAP(newv));
#else
ret = atomic_cmpxchg__nocheck(haddr, BSWAP(cmpv), BSWAP(newv));
#endif
ATOMIC_MMU_CLEANUP;
return BSWAP(ret);
}
#if DATA_SIZE >= 16
#if HAVE_ATOMIC128
ABI_TYPE ATOMIC_NAME(ld)(CPUArchState *env, target_ulong addr EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE val, *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_LD;
val = atomic16_read(haddr);
ATOMIC_MMU_CLEANUP;
return BSWAP(val);
}
void ATOMIC_NAME(st)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_ST;
val = BSWAP(val);
atomic16_set(haddr, val);
ATOMIC_MMU_CLEANUP;
}
#endif
#else
ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
ABI_TYPE ret;
ATOMIC_TRACE_RMW;
ret = atomic_xchg__nocheck(haddr, BSWAP(val));
ATOMIC_MMU_CLEANUP;
return BSWAP(ret);
}
#define GEN_ATOMIC_HELPER(X) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE val EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
DATA_TYPE ret; \
\
ATOMIC_TRACE_RMW; \
ret = atomic_##X(haddr, BSWAP(val)); \
ATOMIC_MMU_CLEANUP; \
return BSWAP(ret); \
}
GEN_ATOMIC_HELPER(fetch_and)
GEN_ATOMIC_HELPER(fetch_or)
GEN_ATOMIC_HELPER(fetch_xor)
GEN_ATOMIC_HELPER(and_fetch)
GEN_ATOMIC_HELPER(or_fetch)
GEN_ATOMIC_HELPER(xor_fetch)
#undef GEN_ATOMIC_HELPER
/* These helpers are, as a whole, full barriers. Within the helper,
* the leading barrier is explicit and the trailing barrier is within
* cmpxchg primitive.
*
* Trace this load + RMW loop as a single RMW op. This way, regardless
* of CF_PARALLEL's value, we'll trace just a read and a write.
*/
#define GEN_ATOMIC_HELPER_FN(X, FN, XDATA_TYPE, RET) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE xval EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
XDATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
XDATA_TYPE ldo, ldn, old, new, val = xval; \
\
ATOMIC_TRACE_RMW; \
smp_mb(); \
ldn = atomic_read__nocheck(haddr); \
do { \
ldo = ldn; old = BSWAP(ldo); new = FN(old, val); \
ldn = atomic_cmpxchg__nocheck(haddr, ldo, BSWAP(new)); \
} while (ldo != ldn); \
ATOMIC_MMU_CLEANUP; \
return RET; \
}
GEN_ATOMIC_HELPER_FN(fetch_smin, MIN, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umin, MIN, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_smax, MAX, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umax, MAX, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(smin_fetch, MIN, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umin_fetch, MIN, DATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(smax_fetch, MAX, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umax_fetch, MAX, DATA_TYPE, new)
/* Note that for addition, we need to use a separate cmpxchg loop instead
of bswaps for the reverse-host-endian helpers. */
#define ADD(X, Y) (X + Y)
GEN_ATOMIC_HELPER_FN(fetch_add, ADD, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(add_fetch, ADD, DATA_TYPE, new)
#undef ADD
#undef GEN_ATOMIC_HELPER_FN
#endif /* DATA_SIZE >= 16 */
#undef END
#undef MEND
#endif /* DATA_SIZE > 1 */
#undef ATOMIC_TRACE_ST
#undef ATOMIC_TRACE_LD
#undef ATOMIC_TRACE_RMW
#undef BSWAP
#undef ABI_TYPE
#undef DATA_TYPE
#undef SDATA_TYPE
#undef SUFFIX
#undef DATA_SIZE
#undef SHIFT

View File

@@ -1,743 +0,0 @@
/*
* emulator main execution loop
*
* Copyright (c) 2003-2005 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "trace.h"
#include "disas/disas.h"
#include "exec/exec-all.h"
#include "tcg.h"
#include "qemu/atomic.h"
#include "sysemu/qtest.h"
#include "qemu/timer.h"
#include "qemu/rcu.h"
#include "exec/tb-hash.h"
#include "exec/tb-lookup.h"
#include "exec/log.h"
#include "qemu/main-loop.h"
#if defined(TARGET_I386) && !defined(CONFIG_USER_ONLY)
#include "hw/i386/apic.h"
#endif
#include "sysemu/cpus.h"
#include "sysemu/replay.h"
/* -icount align implementation. */
typedef struct SyncClocks {
int64_t diff_clk;
int64_t last_cpu_icount;
int64_t realtime_clock;
} SyncClocks;
#if !defined(CONFIG_USER_ONLY)
/* Allow the guest to have a max 3ms advance.
* The difference between the 2 clocks could therefore
* oscillate around 0.
*/
#define VM_CLOCK_ADVANCE 3000000
#define THRESHOLD_REDUCE 1.5
#define MAX_DELAY_PRINT_RATE 2000000000LL
#define MAX_NB_PRINTS 100
static void align_clocks(SyncClocks *sc, CPUState *cpu)
{
int64_t cpu_icount;
if (!icount_align_option) {
return;
}
cpu_icount = cpu->icount_extra + cpu_neg(cpu)->icount_decr.u16.low;
sc->diff_clk += cpu_icount_to_ns(sc->last_cpu_icount - cpu_icount);
sc->last_cpu_icount = cpu_icount;
if (sc->diff_clk > VM_CLOCK_ADVANCE) {
#ifndef _WIN32
struct timespec sleep_delay, rem_delay;
sleep_delay.tv_sec = sc->diff_clk / 1000000000LL;
sleep_delay.tv_nsec = sc->diff_clk % 1000000000LL;
if (nanosleep(&sleep_delay, &rem_delay) < 0) {
sc->diff_clk = rem_delay.tv_sec * 1000000000LL + rem_delay.tv_nsec;
} else {
sc->diff_clk = 0;
}
#else
Sleep(sc->diff_clk / SCALE_MS);
sc->diff_clk = 0;
#endif
}
}
static void print_delay(const SyncClocks *sc)
{
static float threshold_delay;
static int64_t last_realtime_clock;
static int nb_prints;
if (icount_align_option &&
sc->realtime_clock - last_realtime_clock >= MAX_DELAY_PRINT_RATE &&
nb_prints < MAX_NB_PRINTS) {
if ((-sc->diff_clk / (float)1000000000LL > threshold_delay) ||
(-sc->diff_clk / (float)1000000000LL <
(threshold_delay - THRESHOLD_REDUCE))) {
threshold_delay = (-sc->diff_clk / 1000000000LL) + 1;
printf("Warning: The guest is now late by %.1f to %.1f seconds\n",
threshold_delay - 1,
threshold_delay);
nb_prints++;
last_realtime_clock = sc->realtime_clock;
}
}
}
static void init_delay_params(SyncClocks *sc, CPUState *cpu)
{
if (!icount_align_option) {
return;
}
sc->realtime_clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL_RT);
sc->diff_clk = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - sc->realtime_clock;
sc->last_cpu_icount
= cpu->icount_extra + cpu_neg(cpu)->icount_decr.u16.low;
if (sc->diff_clk < max_delay) {
max_delay = sc->diff_clk;
}
if (sc->diff_clk > max_advance) {
max_advance = sc->diff_clk;
}
/* Print every 2s max if the guest is late. We limit the number
of printed messages to NB_PRINT_MAX(currently 100) */
print_delay(sc);
}
#else
static void align_clocks(SyncClocks *sc, const CPUState *cpu)
{
}
static void init_delay_params(SyncClocks *sc, const CPUState *cpu)
{
}
#endif /* CONFIG USER ONLY */
/* Execute a TB, and fix up the CPU state afterwards if necessary */
static inline tcg_target_ulong cpu_tb_exec(CPUState *cpu, TranslationBlock *itb)
{
CPUArchState *env = cpu->env_ptr;
uintptr_t ret;
TranslationBlock *last_tb;
int tb_exit;
uint8_t *tb_ptr = itb->tc.ptr;
qemu_log_mask_and_addr(CPU_LOG_EXEC, itb->pc,
"Trace %d: %p ["
TARGET_FMT_lx "/" TARGET_FMT_lx "/%#x] %s\n",
cpu->cpu_index, itb->tc.ptr,
itb->cs_base, itb->pc, itb->flags,
lookup_symbol(itb->pc));
#if defined(DEBUG_DISAS)
if (qemu_loglevel_mask(CPU_LOG_TB_CPU)
&& qemu_log_in_addr_range(itb->pc)) {
qemu_log_lock();
int flags = 0;
if (qemu_loglevel_mask(CPU_LOG_TB_FPU)) {
flags |= CPU_DUMP_FPU;
}
#if defined(TARGET_I386)
flags |= CPU_DUMP_CCOP;
#endif
log_cpu_state(cpu, flags);
qemu_log_unlock();
}
#endif /* DEBUG_DISAS */
cpu->can_do_io = !use_icount;
ret = tcg_qemu_tb_exec(env, tb_ptr);
cpu->can_do_io = 1;
last_tb = (TranslationBlock *)(ret & ~TB_EXIT_MASK);
tb_exit = ret & TB_EXIT_MASK;
trace_exec_tb_exit(last_tb, tb_exit);
if (tb_exit > TB_EXIT_IDX1) {
/* We didn't start executing this TB (eg because the instruction
* counter hit zero); we must restore the guest PC to the address
* of the start of the TB.
*/
CPUClass *cc = CPU_GET_CLASS(cpu);
qemu_log_mask_and_addr(CPU_LOG_EXEC, last_tb->pc,
"Stopped execution of TB chain before %p ["
TARGET_FMT_lx "] %s\n",
last_tb->tc.ptr, last_tb->pc,
lookup_symbol(last_tb->pc));
if (cc->synchronize_from_tb) {
cc->synchronize_from_tb(cpu, last_tb);
} else {
assert(cc->set_pc);
cc->set_pc(cpu, last_tb->pc);
}
}
return ret;
}
#ifndef CONFIG_USER_ONLY
/* Execute the code without caching the generated code. An interpreter
could be used if available. */
static void cpu_exec_nocache(CPUState *cpu, int max_cycles,
TranslationBlock *orig_tb, bool ignore_icount)
{
TranslationBlock *tb;
uint32_t cflags = curr_cflags() | CF_NOCACHE;
if (ignore_icount) {
cflags &= ~CF_USE_ICOUNT;
}
/* Should never happen.
We only end up here when an existing TB is too long. */
cflags |= MIN(max_cycles, CF_COUNT_MASK);
mmap_lock();
tb = tb_gen_code(cpu, orig_tb->pc, orig_tb->cs_base,
orig_tb->flags, cflags);
tb->orig_tb = orig_tb;
mmap_unlock();
/* execute the generated code */
trace_exec_tb_nocache(tb, tb->pc);
cpu_tb_exec(cpu, tb);
mmap_lock();
tb_phys_invalidate(tb, -1);
mmap_unlock();
tcg_tb_remove(tb);
}
#endif
void cpu_exec_step_atomic(CPUState *cpu)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
TranslationBlock *tb;
target_ulong cs_base, pc;
uint32_t flags;
uint32_t cflags = 1;
uint32_t cf_mask = cflags & CF_HASH_MASK;
/* volatile because we modify it between setjmp and longjmp */
volatile bool in_exclusive_region = false;
if (sigsetjmp(cpu->jmp_env, 0) == 0) {
tb = tb_lookup__cpu_state(cpu, &pc, &cs_base, &flags, cf_mask);
if (tb == NULL) {
mmap_lock();
tb = tb_gen_code(cpu, pc, cs_base, flags, cflags);
mmap_unlock();
}
start_exclusive();
/* Since we got here, we know that parallel_cpus must be true. */
parallel_cpus = false;
in_exclusive_region = true;
cc->cpu_exec_enter(cpu);
/* execute the generated code */
trace_exec_tb(tb, pc);
cpu_tb_exec(cpu, tb);
cc->cpu_exec_exit(cpu);
} else {
/*
* The mmap_lock is dropped by tb_gen_code if it runs out of
* memory.
*/
#ifndef CONFIG_SOFTMMU
tcg_debug_assert(!have_mmap_lock());
#endif
if (qemu_mutex_iothread_locked()) {
qemu_mutex_unlock_iothread();
}
assert_no_pages_locked();
}
if (in_exclusive_region) {
/* We might longjump out of either the codegen or the
* execution, so must make sure we only end the exclusive
* region if we started it.
*/
parallel_cpus = true;
end_exclusive();
}
}
struct tb_desc {
target_ulong pc;
target_ulong cs_base;
CPUArchState *env;
tb_page_addr_t phys_page1;
uint32_t flags;
uint32_t cf_mask;
uint32_t trace_vcpu_dstate;
};
static bool tb_lookup_cmp(const void *p, const void *d)
{
const TranslationBlock *tb = p;
const struct tb_desc *desc = d;
if (tb->pc == desc->pc &&
tb->page_addr[0] == desc->phys_page1 &&
tb->cs_base == desc->cs_base &&
tb->flags == desc->flags &&
tb->trace_vcpu_dstate == desc->trace_vcpu_dstate &&
(tb_cflags(tb) & (CF_HASH_MASK | CF_INVALID)) == desc->cf_mask) {
/* check next page if needed */
if (tb->page_addr[1] == -1) {
return true;
} else {
tb_page_addr_t phys_page2;
target_ulong virt_page2;
virt_page2 = (desc->pc & TARGET_PAGE_MASK) + TARGET_PAGE_SIZE;
phys_page2 = get_page_addr_code(desc->env, virt_page2);
if (tb->page_addr[1] == phys_page2) {
return true;
}
}
}
return false;
}
TranslationBlock *tb_htable_lookup(CPUState *cpu, target_ulong pc,
target_ulong cs_base, uint32_t flags,
uint32_t cf_mask)
{
tb_page_addr_t phys_pc;
struct tb_desc desc;
uint32_t h;
desc.env = (CPUArchState *)cpu->env_ptr;
desc.cs_base = cs_base;
desc.flags = flags;
desc.cf_mask = cf_mask;
desc.trace_vcpu_dstate = *cpu->trace_dstate;
desc.pc = pc;
phys_pc = get_page_addr_code(desc.env, pc);
if (phys_pc == -1) {
return NULL;
}
desc.phys_page1 = phys_pc & TARGET_PAGE_MASK;
h = tb_hash_func(phys_pc, pc, flags, cf_mask, *cpu->trace_dstate);
return qht_lookup_custom(&tb_ctx.htable, &desc, h, tb_lookup_cmp);
}
void tb_set_jmp_target(TranslationBlock *tb, int n, uintptr_t addr)
{
if (TCG_TARGET_HAS_direct_jump) {
uintptr_t offset = tb->jmp_target_arg[n];
uintptr_t tc_ptr = (uintptr_t)tb->tc.ptr;
tb_target_set_jmp_target(tc_ptr, tc_ptr + offset, addr);
} else {
tb->jmp_target_arg[n] = addr;
}
}
static inline void tb_add_jump(TranslationBlock *tb, int n,
TranslationBlock *tb_next)
{
uintptr_t old;
assert(n < ARRAY_SIZE(tb->jmp_list_next));
qemu_spin_lock(&tb_next->jmp_lock);
/* make sure the destination TB is valid */
if (tb_next->cflags & CF_INVALID) {
goto out_unlock_next;
}
/* Atomically claim the jump destination slot only if it was NULL */
old = atomic_cmpxchg(&tb->jmp_dest[n], (uintptr_t)NULL, (uintptr_t)tb_next);
if (old) {
goto out_unlock_next;
}
/* patch the native jump address */
tb_set_jmp_target(tb, n, (uintptr_t)tb_next->tc.ptr);
/* add in TB jmp list */
tb->jmp_list_next[n] = tb_next->jmp_list_head;
tb_next->jmp_list_head = (uintptr_t)tb | n;
qemu_spin_unlock(&tb_next->jmp_lock);
qemu_log_mask_and_addr(CPU_LOG_EXEC, tb->pc,
"Linking TBs %p [" TARGET_FMT_lx
"] index %d -> %p [" TARGET_FMT_lx "]\n",
tb->tc.ptr, tb->pc, n,
tb_next->tc.ptr, tb_next->pc);
return;
out_unlock_next:
qemu_spin_unlock(&tb_next->jmp_lock);
return;
}
static inline TranslationBlock *tb_find(CPUState *cpu,
TranslationBlock *last_tb,
int tb_exit, uint32_t cf_mask)
{
TranslationBlock *tb;
target_ulong cs_base, pc;
uint32_t flags;
tb = tb_lookup__cpu_state(cpu, &pc, &cs_base, &flags, cf_mask);
if (tb == NULL) {
mmap_lock();
tb = tb_gen_code(cpu, pc, cs_base, flags, cf_mask);
mmap_unlock();
/* We add the TB in the virtual pc hash table for the fast lookup */
atomic_set(&cpu->tb_jmp_cache[tb_jmp_cache_hash_func(pc)], tb);
}
#ifndef CONFIG_USER_ONLY
/* We don't take care of direct jumps when address mapping changes in
* system emulation. So it's not safe to make a direct jump to a TB
* spanning two pages because the mapping for the second page can change.
*/
if (tb->page_addr[1] != -1) {
last_tb = NULL;
}
#endif
/* See if we can patch the calling TB. */
if (last_tb) {
tb_add_jump(last_tb, tb_exit, tb);
}
return tb;
}
static inline bool cpu_handle_halt(CPUState *cpu)
{
if (cpu->halted) {
#if defined(TARGET_I386) && !defined(CONFIG_USER_ONLY)
if ((cpu->interrupt_request & CPU_INTERRUPT_POLL)
&& replay_interrupt()) {
X86CPU *x86_cpu = X86_CPU(cpu);
qemu_mutex_lock_iothread();
apic_poll_irq(x86_cpu->apic_state);
cpu_reset_interrupt(cpu, CPU_INTERRUPT_POLL);
qemu_mutex_unlock_iothread();
}
#endif
if (!cpu_has_work(cpu)) {
return true;
}
cpu->halted = 0;
}
return false;
}
static inline void cpu_handle_debug_exception(CPUState *cpu)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
CPUWatchpoint *wp;
if (!cpu->watchpoint_hit) {
QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {
wp->flags &= ~BP_WATCHPOINT_HIT;
}
}
cc->debug_excp_handler(cpu);
}
static inline bool cpu_handle_exception(CPUState *cpu, int *ret)
{
if (cpu->exception_index < 0) {
#ifndef CONFIG_USER_ONLY
if (replay_has_exception()
&& cpu_neg(cpu)->icount_decr.u16.low + cpu->icount_extra == 0) {
/* try to cause an exception pending in the log */
cpu_exec_nocache(cpu, 1, tb_find(cpu, NULL, 0, curr_cflags()), true);
}
#endif
if (cpu->exception_index < 0) {
return false;
}
}
if (cpu->exception_index >= EXCP_INTERRUPT) {
/* exit request from the cpu execution loop */
*ret = cpu->exception_index;
if (*ret == EXCP_DEBUG) {
cpu_handle_debug_exception(cpu);
}
cpu->exception_index = -1;
return true;
} else {
#if defined(CONFIG_USER_ONLY)
/* if user mode only, we simulate a fake exception
which will be handled outside the cpu execution
loop */
#if defined(TARGET_I386)
CPUClass *cc = CPU_GET_CLASS(cpu);
cc->do_interrupt(cpu);
#endif
*ret = cpu->exception_index;
cpu->exception_index = -1;
return true;
#else
if (replay_exception()) {
CPUClass *cc = CPU_GET_CLASS(cpu);
qemu_mutex_lock_iothread();
cc->do_interrupt(cpu);
qemu_mutex_unlock_iothread();
cpu->exception_index = -1;
} else if (!replay_has_interrupt()) {
/* give a chance to iothread in replay mode */
*ret = EXCP_INTERRUPT;
return true;
}
#endif
}
return false;
}
static inline bool cpu_handle_interrupt(CPUState *cpu,
TranslationBlock **last_tb)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
/* Clear the interrupt flag now since we're processing
* cpu->interrupt_request and cpu->exit_request.
* Ensure zeroing happens before reading cpu->exit_request or
* cpu->interrupt_request (see also smp_wmb in cpu_exit())
*/
atomic_mb_set(&cpu_neg(cpu)->icount_decr.u16.high, 0);
if (unlikely(atomic_read(&cpu->interrupt_request))) {
int interrupt_request;
qemu_mutex_lock_iothread();
interrupt_request = cpu->interrupt_request;
if (unlikely(cpu->singlestep_enabled & SSTEP_NOIRQ)) {
/* Mask out external interrupts for this step. */
interrupt_request &= ~CPU_INTERRUPT_SSTEP_MASK;
}
if (interrupt_request & CPU_INTERRUPT_DEBUG) {
cpu->interrupt_request &= ~CPU_INTERRUPT_DEBUG;
cpu->exception_index = EXCP_DEBUG;
qemu_mutex_unlock_iothread();
return true;
}
if (replay_mode == REPLAY_MODE_PLAY && !replay_has_interrupt()) {
/* Do nothing */
} else if (interrupt_request & CPU_INTERRUPT_HALT) {
replay_interrupt();
cpu->interrupt_request &= ~CPU_INTERRUPT_HALT;
cpu->halted = 1;
cpu->exception_index = EXCP_HLT;
qemu_mutex_unlock_iothread();
return true;
}
#if defined(TARGET_I386)
else if (interrupt_request & CPU_INTERRUPT_INIT) {
X86CPU *x86_cpu = X86_CPU(cpu);
CPUArchState *env = &x86_cpu->env;
replay_interrupt();
cpu_svm_check_intercept_param(env, SVM_EXIT_INIT, 0, 0);
do_cpu_init(x86_cpu);
cpu->exception_index = EXCP_HALTED;
qemu_mutex_unlock_iothread();
return true;
}
#else
else if (interrupt_request & CPU_INTERRUPT_RESET) {
replay_interrupt();
cpu_reset(cpu);
qemu_mutex_unlock_iothread();
return true;
}
#endif
/* The target hook has 3 exit conditions:
False when the interrupt isn't processed,
True when it is, and we should restart on a new TB,
and via longjmp via cpu_loop_exit. */
else {
if (cc->cpu_exec_interrupt(cpu, interrupt_request)) {
replay_interrupt();
cpu->exception_index = -1;
*last_tb = NULL;
}
/* The target hook may have updated the 'cpu->interrupt_request';
* reload the 'interrupt_request' value */
interrupt_request = cpu->interrupt_request;
}
if (interrupt_request & CPU_INTERRUPT_EXITTB) {
cpu->interrupt_request &= ~CPU_INTERRUPT_EXITTB;
/* ensure that no TB jump will be modified as
the program flow was changed */
*last_tb = NULL;
}
/* If we exit via cpu_loop_exit/longjmp it is reset in cpu_exec */
qemu_mutex_unlock_iothread();
}
/* Finally, check if we need to exit to the main loop. */
if (unlikely(atomic_read(&cpu->exit_request))
|| (use_icount
&& cpu_neg(cpu)->icount_decr.u16.low + cpu->icount_extra == 0)) {
atomic_set(&cpu->exit_request, 0);
if (cpu->exception_index == -1) {
cpu->exception_index = EXCP_INTERRUPT;
}
return true;
}
return false;
}
static inline void cpu_loop_exec_tb(CPUState *cpu, TranslationBlock *tb,
TranslationBlock **last_tb, int *tb_exit)
{
uintptr_t ret;
int32_t insns_left;
trace_exec_tb(tb, tb->pc);
ret = cpu_tb_exec(cpu, tb);
tb = (TranslationBlock *)(ret & ~TB_EXIT_MASK);
*tb_exit = ret & TB_EXIT_MASK;
if (*tb_exit != TB_EXIT_REQUESTED) {
*last_tb = tb;
return;
}
*last_tb = NULL;
insns_left = atomic_read(&cpu_neg(cpu)->icount_decr.u32);
if (insns_left < 0) {
/* Something asked us to stop executing chained TBs; just
* continue round the main loop. Whatever requested the exit
* will also have set something else (eg exit_request or
* interrupt_request) which will be handled by
* cpu_handle_interrupt. cpu_handle_interrupt will also
* clear cpu->icount_decr.u16.high.
*/
return;
}
/* Instruction counter expired. */
assert(use_icount);
#ifndef CONFIG_USER_ONLY
/* Ensure global icount has gone forward */
cpu_update_icount(cpu);
/* Refill decrementer and continue execution. */
insns_left = MIN(0xffff, cpu->icount_budget);
cpu_neg(cpu)->icount_decr.u16.low = insns_left;
cpu->icount_extra = cpu->icount_budget - insns_left;
if (!cpu->icount_extra) {
/* Execute any remaining instructions, then let the main loop
* handle the next event.
*/
if (insns_left > 0) {
cpu_exec_nocache(cpu, insns_left, tb, false);
}
}
#endif
}
/* main execution loop */
int cpu_exec(CPUState *cpu)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
int ret;
SyncClocks sc = { 0 };
/* replay_interrupt may need current_cpu */
current_cpu = cpu;
if (cpu_handle_halt(cpu)) {
return EXCP_HALTED;
}
rcu_read_lock();
cc->cpu_exec_enter(cpu);
/* Calculate difference between guest clock and host clock.
* This delay includes the delay of the last cycle, so
* what we have to do is sleep until it is 0. As for the
* advance/delay we gain here, we try to fix it next time.
*/
init_delay_params(&sc, cpu);
/* prepare setjmp context for exception handling */
if (sigsetjmp(cpu->jmp_env, 0) != 0) {
#if defined(__clang__) || !QEMU_GNUC_PREREQ(4, 6)
/* Some compilers wrongly smash all local variables after
* siglongjmp. There were bug reports for gcc 4.5.0 and clang.
* Reload essential local variables here for those compilers.
* Newer versions of gcc would complain about this code (-Wclobbered). */
cpu = current_cpu;
cc = CPU_GET_CLASS(cpu);
#else /* buggy compiler */
/* Assert that the compiler does not smash local variables. */
g_assert(cpu == current_cpu);
g_assert(cc == CPU_GET_CLASS(cpu));
#endif /* buggy compiler */
#ifndef CONFIG_SOFTMMU
tcg_debug_assert(!have_mmap_lock());
#endif
if (qemu_mutex_iothread_locked()) {
qemu_mutex_unlock_iothread();
}
assert_no_pages_locked();
}
/* if an exception is pending, we execute it here */
while (!cpu_handle_exception(cpu, &ret)) {
TranslationBlock *last_tb = NULL;
int tb_exit = 0;
while (!cpu_handle_interrupt(cpu, &last_tb)) {
uint32_t cflags = cpu->cflags_next_tb;
TranslationBlock *tb;
/* When requested, use an exact setting for cflags for the next
execution. This is used for icount, precise smc, and stop-
after-access watchpoints. Since this request should never
have CF_INVALID set, -1 is a convenient invalid value that
does not require tcg headers for cpu_common_reset. */
if (cflags == -1) {
cflags = curr_cflags();
} else {
cpu->cflags_next_tb = -1;
}
tb = tb_find(cpu, last_tb, tb_exit, cflags);
cpu_loop_exec_tb(cpu, tb, &last_tb, &tb_exit);
/* Try to align the host and virtual clocks
if the guest is in advance */
align_clocks(&sc, cpu);
}
}
cc->cpu_exec_exit(cpu);
rcu_read_unlock();
return ret;
}

File diff suppressed because it is too large Load Diff

View File

@@ -1,90 +0,0 @@
/*
* QEMU System Emulator, accelerator interfaces
*
* Copyright (c) 2003-2008 Fabrice Bellard
* Copyright (c) 2014 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "sysemu/accel.h"
#include "sysemu/sysemu.h"
#include "sysemu/tcg.h"
#include "qom/object.h"
#include "cpu.h"
#include "sysemu/cpus.h"
#include "qemu/main-loop.h"
unsigned long tcg_tb_size;
/* mask must never be zero, except for A20 change call */
static void tcg_handle_interrupt(CPUState *cpu, int mask)
{
int old_mask;
g_assert(qemu_mutex_iothread_locked());
old_mask = cpu->interrupt_request;
cpu->interrupt_request |= mask;
/*
* If called from iothread context, wake the target cpu in
* case its halted.
*/
if (!qemu_cpu_is_self(cpu)) {
qemu_cpu_kick(cpu);
} else {
atomic_set(&cpu_neg(cpu)->icount_decr.u16.high, -1);
if (use_icount &&
!cpu->can_do_io
&& (mask & ~old_mask) != 0) {
cpu_abort(cpu, "Raised interrupt while not in I/O function");
}
}
}
static int tcg_init(MachineState *ms)
{
tcg_exec_init(tcg_tb_size * 1024 * 1024);
cpu_interrupt_handler = tcg_handle_interrupt;
return 0;
}
static void tcg_accel_class_init(ObjectClass *oc, void *data)
{
AccelClass *ac = ACCEL_CLASS(oc);
ac->name = "tcg";
ac->init_machine = tcg_init;
ac->allowed = &tcg_allowed;
}
#define TYPE_TCG_ACCEL ACCEL_CLASS_NAME("tcg")
static const TypeInfo tcg_accel_type = {
.name = TYPE_TCG_ACCEL,
.parent = TYPE_ACCEL,
.class_init = tcg_accel_class_init,
};
static void register_accel_types(void)
{
type_register_static(&tcg_accel_type);
}
type_init(register_accel_types);

File diff suppressed because it is too large Load Diff

View File

@@ -1,169 +0,0 @@
/*
* Tiny Code Generator for QEMU
*
* Copyright (c) 2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/host-utils.h"
#include "cpu.h"
#include "exec/helper-proto.h"
#include "exec/cpu_ldst.h"
#include "exec/exec-all.h"
#include "exec/tb-lookup.h"
#include "disas/disas.h"
#include "exec/log.h"
/* 32-bit helpers */
int32_t HELPER(div_i32)(int32_t arg1, int32_t arg2)
{
return arg1 / arg2;
}
int32_t HELPER(rem_i32)(int32_t arg1, int32_t arg2)
{
return arg1 % arg2;
}
uint32_t HELPER(divu_i32)(uint32_t arg1, uint32_t arg2)
{
return arg1 / arg2;
}
uint32_t HELPER(remu_i32)(uint32_t arg1, uint32_t arg2)
{
return arg1 % arg2;
}
/* 64-bit helpers */
uint64_t HELPER(shl_i64)(uint64_t arg1, uint64_t arg2)
{
return arg1 << arg2;
}
uint64_t HELPER(shr_i64)(uint64_t arg1, uint64_t arg2)
{
return arg1 >> arg2;
}
int64_t HELPER(sar_i64)(int64_t arg1, int64_t arg2)
{
return arg1 >> arg2;
}
int64_t HELPER(div_i64)(int64_t arg1, int64_t arg2)
{
return arg1 / arg2;
}
int64_t HELPER(rem_i64)(int64_t arg1, int64_t arg2)
{
return arg1 % arg2;
}
uint64_t HELPER(divu_i64)(uint64_t arg1, uint64_t arg2)
{
return arg1 / arg2;
}
uint64_t HELPER(remu_i64)(uint64_t arg1, uint64_t arg2)
{
return arg1 % arg2;
}
uint64_t HELPER(muluh_i64)(uint64_t arg1, uint64_t arg2)
{
uint64_t l, h;
mulu64(&l, &h, arg1, arg2);
return h;
}
int64_t HELPER(mulsh_i64)(int64_t arg1, int64_t arg2)
{
uint64_t l, h;
muls64(&l, &h, arg1, arg2);
return h;
}
uint32_t HELPER(clz_i32)(uint32_t arg, uint32_t zero_val)
{
return arg ? clz32(arg) : zero_val;
}
uint32_t HELPER(ctz_i32)(uint32_t arg, uint32_t zero_val)
{
return arg ? ctz32(arg) : zero_val;
}
uint64_t HELPER(clz_i64)(uint64_t arg, uint64_t zero_val)
{
return arg ? clz64(arg) : zero_val;
}
uint64_t HELPER(ctz_i64)(uint64_t arg, uint64_t zero_val)
{
return arg ? ctz64(arg) : zero_val;
}
uint32_t HELPER(clrsb_i32)(uint32_t arg)
{
return clrsb32(arg);
}
uint64_t HELPER(clrsb_i64)(uint64_t arg)
{
return clrsb64(arg);
}
uint32_t HELPER(ctpop_i32)(uint32_t arg)
{
return ctpop32(arg);
}
uint64_t HELPER(ctpop_i64)(uint64_t arg)
{
return ctpop64(arg);
}
void *HELPER(lookup_tb_ptr)(CPUArchState *env)
{
CPUState *cpu = env_cpu(env);
TranslationBlock *tb;
target_ulong cs_base, pc;
uint32_t flags;
tb = tb_lookup__cpu_state(cpu, &pc, &cs_base, &flags, curr_cflags());
if (tb == NULL) {
return tcg_ctx->code_gen_epilogue;
}
qemu_log_mask_and_addr(CPU_LOG_EXEC, pc,
"Chain %d: %p ["
TARGET_FMT_lx "/" TARGET_FMT_lx "/%#x] %s\n",
cpu->cpu_index, tb->tc.ptr, cs_base, pc, flags,
lookup_symbol(pc));
return tb->tc.ptr;
}
void HELPER(exit_atomic)(CPUArchState *env)
{
cpu_loop_exit_atomic(env_cpu(env), GETPC());
}

View File

@@ -1,307 +0,0 @@
DEF_HELPER_FLAGS_2(div_i32, TCG_CALL_NO_RWG_SE, s32, s32, s32)
DEF_HELPER_FLAGS_2(rem_i32, TCG_CALL_NO_RWG_SE, s32, s32, s32)
DEF_HELPER_FLAGS_2(divu_i32, TCG_CALL_NO_RWG_SE, i32, i32, i32)
DEF_HELPER_FLAGS_2(remu_i32, TCG_CALL_NO_RWG_SE, i32, i32, i32)
DEF_HELPER_FLAGS_2(div_i64, TCG_CALL_NO_RWG_SE, s64, s64, s64)
DEF_HELPER_FLAGS_2(rem_i64, TCG_CALL_NO_RWG_SE, s64, s64, s64)
DEF_HELPER_FLAGS_2(divu_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(remu_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(shl_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(shr_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(sar_i64, TCG_CALL_NO_RWG_SE, s64, s64, s64)
DEF_HELPER_FLAGS_2(mulsh_i64, TCG_CALL_NO_RWG_SE, s64, s64, s64)
DEF_HELPER_FLAGS_2(muluh_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(clz_i32, TCG_CALL_NO_RWG_SE, i32, i32, i32)
DEF_HELPER_FLAGS_2(ctz_i32, TCG_CALL_NO_RWG_SE, i32, i32, i32)
DEF_HELPER_FLAGS_2(clz_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(ctz_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_1(clrsb_i32, TCG_CALL_NO_RWG_SE, i32, i32)
DEF_HELPER_FLAGS_1(clrsb_i64, TCG_CALL_NO_RWG_SE, i64, i64)
DEF_HELPER_FLAGS_1(ctpop_i32, TCG_CALL_NO_RWG_SE, i32, i32)
DEF_HELPER_FLAGS_1(ctpop_i64, TCG_CALL_NO_RWG_SE, i64, i64)
DEF_HELPER_FLAGS_1(lookup_tb_ptr, TCG_CALL_NO_WG_SE, ptr, env)
DEF_HELPER_FLAGS_1(exit_atomic, TCG_CALL_NO_WG, noreturn, env)
#ifdef CONFIG_SOFTMMU
DEF_HELPER_FLAGS_5(atomic_cmpxchgb, TCG_CALL_NO_WG,
i32, env, tl, i32, i32, i32)
DEF_HELPER_FLAGS_5(atomic_cmpxchgw_be, TCG_CALL_NO_WG,
i32, env, tl, i32, i32, i32)
DEF_HELPER_FLAGS_5(atomic_cmpxchgw_le, TCG_CALL_NO_WG,
i32, env, tl, i32, i32, i32)
DEF_HELPER_FLAGS_5(atomic_cmpxchgl_be, TCG_CALL_NO_WG,
i32, env, tl, i32, i32, i32)
DEF_HELPER_FLAGS_5(atomic_cmpxchgl_le, TCG_CALL_NO_WG,
i32, env, tl, i32, i32, i32)
#ifdef CONFIG_ATOMIC64
DEF_HELPER_FLAGS_5(atomic_cmpxchgq_be, TCG_CALL_NO_WG,
i64, env, tl, i64, i64, i32)
DEF_HELPER_FLAGS_5(atomic_cmpxchgq_le, TCG_CALL_NO_WG,
i64, env, tl, i64, i64, i32)
#endif
#ifdef CONFIG_ATOMIC64
#define GEN_ATOMIC_HELPERS(NAME) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), b), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), w_le), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), w_be), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), l_le), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), l_be), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), q_le), \
TCG_CALL_NO_WG, i64, env, tl, i64, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), q_be), \
TCG_CALL_NO_WG, i64, env, tl, i64, i32)
#else
#define GEN_ATOMIC_HELPERS(NAME) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), b), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), w_le), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), w_be), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), l_le), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), l_be), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32)
#endif /* CONFIG_ATOMIC64 */
#else
DEF_HELPER_FLAGS_4(atomic_cmpxchgb, TCG_CALL_NO_WG, i32, env, tl, i32, i32)
DEF_HELPER_FLAGS_4(atomic_cmpxchgw_be, TCG_CALL_NO_WG, i32, env, tl, i32, i32)
DEF_HELPER_FLAGS_4(atomic_cmpxchgw_le, TCG_CALL_NO_WG, i32, env, tl, i32, i32)
DEF_HELPER_FLAGS_4(atomic_cmpxchgl_be, TCG_CALL_NO_WG, i32, env, tl, i32, i32)
DEF_HELPER_FLAGS_4(atomic_cmpxchgl_le, TCG_CALL_NO_WG, i32, env, tl, i32, i32)
#ifdef CONFIG_ATOMIC64
DEF_HELPER_FLAGS_4(atomic_cmpxchgq_be, TCG_CALL_NO_WG, i64, env, tl, i64, i64)
DEF_HELPER_FLAGS_4(atomic_cmpxchgq_le, TCG_CALL_NO_WG, i64, env, tl, i64, i64)
#endif
#ifdef CONFIG_ATOMIC64
#define GEN_ATOMIC_HELPERS(NAME) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), b), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), w_le), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), w_be), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), l_le), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), l_be), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), q_le), \
TCG_CALL_NO_WG, i64, env, tl, i64) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), q_be), \
TCG_CALL_NO_WG, i64, env, tl, i64)
#else
#define GEN_ATOMIC_HELPERS(NAME) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), b), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), w_le), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), w_be), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), l_le), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), l_be), \
TCG_CALL_NO_WG, i32, env, tl, i32)
#endif /* CONFIG_ATOMIC64 */
#endif /* CONFIG_SOFTMMU */
GEN_ATOMIC_HELPERS(fetch_add)
GEN_ATOMIC_HELPERS(fetch_and)
GEN_ATOMIC_HELPERS(fetch_or)
GEN_ATOMIC_HELPERS(fetch_xor)
GEN_ATOMIC_HELPERS(fetch_smin)
GEN_ATOMIC_HELPERS(fetch_umin)
GEN_ATOMIC_HELPERS(fetch_smax)
GEN_ATOMIC_HELPERS(fetch_umax)
GEN_ATOMIC_HELPERS(add_fetch)
GEN_ATOMIC_HELPERS(and_fetch)
GEN_ATOMIC_HELPERS(or_fetch)
GEN_ATOMIC_HELPERS(xor_fetch)
GEN_ATOMIC_HELPERS(smin_fetch)
GEN_ATOMIC_HELPERS(umin_fetch)
GEN_ATOMIC_HELPERS(smax_fetch)
GEN_ATOMIC_HELPERS(umax_fetch)
GEN_ATOMIC_HELPERS(xchg)
#undef GEN_ATOMIC_HELPERS
DEF_HELPER_FLAGS_3(gvec_mov, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_dup8, TCG_CALL_NO_RWG, void, ptr, i32, i32)
DEF_HELPER_FLAGS_3(gvec_dup16, TCG_CALL_NO_RWG, void, ptr, i32, i32)
DEF_HELPER_FLAGS_3(gvec_dup32, TCG_CALL_NO_RWG, void, ptr, i32, i32)
DEF_HELPER_FLAGS_3(gvec_dup64, TCG_CALL_NO_RWG, void, ptr, i32, i64)
DEF_HELPER_FLAGS_4(gvec_add8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_add16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_add32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_add64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_adds8, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_adds16, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_adds32, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_adds64, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_sub8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sub16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sub32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sub64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_subs8, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_subs16, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_subs32, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_subs64, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_mul8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_mul16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_mul32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_mul64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_muls8, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_muls16, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_muls32, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_muls64, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_ssadd8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ssadd16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ssadd32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ssadd64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sssub8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sssub16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sssub32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sssub64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_usadd8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_usadd16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_usadd32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_usadd64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg8, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg16, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg32, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg64, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_abs8, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_abs16, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_abs32, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_abs64, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_not, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_and, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_or, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_xor, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_andc, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_orc, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_nand, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_nor, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eqv, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ands, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_xors, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_ors, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_3(gvec_shl8i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shl16i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shl32i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shl64i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shr8i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shr16i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shr32i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shr64i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_sar8i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_sar16i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_sar32i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_sar64i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shl8v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shl16v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shl32v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shl64v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shr8v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shr16v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shr32v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shr64v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sar8v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sar16v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sar32v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sar64v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ne8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ne16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ne32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ne64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_lt8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_lt16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_lt32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_lt64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_le8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_le16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_le32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_le64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ltu8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ltu16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ltu32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ltu64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_5(gvec_bitsel, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)

View File

@@ -1,10 +0,0 @@
# See docs/devel/tracing.txt for syntax documentation.
# TCG related tracing (mostly disabled by default)
# cpu-exec.c
disable exec_tb(void *tb, uintptr_t pc) "tb:%p pc=0x%"PRIxPTR
disable exec_tb_nocache(void *tb, uintptr_t pc) "tb:%p pc=0x%"PRIxPTR
disable exec_tb_exit(void *last_tb, unsigned int flags) "tb:%p flags=0x%x"
# translate-all.c
translate_block(void *tb, uintptr_t pc, uint8_t *tb_code) "tb:%p, pc:0x%"PRIxPTR", tb_code:%p"

File diff suppressed because it is too large Load Diff

View File

@@ -1,39 +0,0 @@
/*
* Translated block handling
*
* Copyright (c) 2003 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef TRANSLATE_ALL_H
#define TRANSLATE_ALL_H
#include "exec/exec-all.h"
/* translate-all.c */
struct page_collection *page_collection_lock(tb_page_addr_t start,
tb_page_addr_t end);
void page_collection_unlock(struct page_collection *set);
void tb_invalidate_phys_page_fast(struct page_collection *pages,
tb_page_addr_t start, int len);
void tb_invalidate_phys_page_range(tb_page_addr_t start, tb_page_addr_t end,
int is_cpu_write_access);
void tb_check_watchpoint(CPUState *cpu);
#ifdef CONFIG_USER_ONLY
int page_unprotect(target_ulong address, uintptr_t pc);
#endif
#endif /* TRANSLATE_ALL_H */

View File

@@ -1,129 +0,0 @@
/*
* Generic intermediate code generation.
*
* Copyright (C) 2016-2017 Lluís Vilanova <vilanova@ac.upc.edu>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/error-report.h"
#include "cpu.h"
#include "tcg/tcg.h"
#include "tcg/tcg-op.h"
#include "exec/exec-all.h"
#include "exec/gen-icount.h"
#include "exec/log.h"
#include "exec/translator.h"
/* Pairs with tcg_clear_temp_count.
To be called by #TranslatorOps.{translate_insn,tb_stop} if
(1) the target is sufficiently clean to support reporting,
(2) as and when all temporaries are known to be consumed.
For most targets, (2) is at the end of translate_insn. */
void translator_loop_temp_check(DisasContextBase *db)
{
if (tcg_check_temp_count()) {
qemu_log("warning: TCG temporary leaks before "
TARGET_FMT_lx "\n", db->pc_next);
}
}
void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
CPUState *cpu, TranslationBlock *tb, int max_insns)
{
int bp_insn = 0;
/* Initialize DisasContext */
db->tb = tb;
db->pc_first = tb->pc;
db->pc_next = db->pc_first;
db->is_jmp = DISAS_NEXT;
db->num_insns = 0;
db->max_insns = max_insns;
db->singlestep_enabled = cpu->singlestep_enabled;
ops->init_disas_context(db, cpu);
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
/* Reset the temp count so that we can identify leaks */
tcg_clear_temp_count();
/* Start translating. */
gen_tb_start(db->tb);
ops->tb_start(db, cpu);
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
while (true) {
db->num_insns++;
ops->insn_start(db, cpu);
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
/* Pass breakpoint hits to target for further processing */
if (!db->singlestep_enabled
&& unlikely(!QTAILQ_EMPTY(&cpu->breakpoints))) {
CPUBreakpoint *bp;
QTAILQ_FOREACH(bp, &cpu->breakpoints, entry) {
if (bp->pc == db->pc_next) {
if (ops->breakpoint_check(db, cpu, bp)) {
bp_insn = 1;
break;
}
}
}
/* The breakpoint_check hook may use DISAS_TOO_MANY to indicate
that only one more instruction is to be executed. Otherwise
it should use DISAS_NORETURN when generating an exception,
but may use a DISAS_TARGET_* value for Something Else. */
if (db->is_jmp > DISAS_TOO_MANY) {
break;
}
}
/* Disassemble one instruction. The translate_insn hook should
update db->pc_next and db->is_jmp to indicate what should be
done next -- either exiting this loop or locate the start of
the next instruction. */
if (db->num_insns == db->max_insns
&& (tb_cflags(db->tb) & CF_LAST_IO)) {
/* Accept I/O on the last instruction. */
gen_io_start();
ops->translate_insn(db, cpu);
gen_io_end();
} else {
ops->translate_insn(db, cpu);
}
/* Stop translation if translate_insn so indicated. */
if (db->is_jmp != DISAS_NEXT) {
break;
}
/* Stop translation if the output buffer is full,
or we have executed all of the allowed instructions. */
if (tcg_op_buf_full() || db->num_insns >= db->max_insns) {
db->is_jmp = DISAS_TOO_MANY;
break;
}
}
/* Emit code to exit the TB, as indicated by db->is_jmp. */
ops->tb_stop(db, cpu);
gen_tb_end(db->tb, db->num_insns - bp_insn);
/* The disas_log hook may use these values rather than recompute. */
db->tb->size = db->pc_next - db->pc_first;
db->tb->icount = db->num_insns;
#ifdef DEBUG_DISAS
if (qemu_loglevel_mask(CPU_LOG_TB_IN_ASM)
&& qemu_log_in_addr_range(db->pc_first)) {
qemu_log_lock();
qemu_log("----------------\n");
ops->disas_log(db, cpu);
qemu_log("\n");
qemu_log_unlock();
}
#endif
}

View File

@@ -1,36 +0,0 @@
#include "qemu/osdep.h"
#include "qom/cpu.h"
#include "sysemu/replay.h"
#include "sysemu/sysemu.h"
bool enable_cpu_pm = false;
void cpu_resume(CPUState *cpu)
{
}
void qemu_init_vcpu(CPUState *cpu)
{
}
/* User mode emulation does not support record/replay yet. */
bool replay_exception(void)
{
return true;
}
bool replay_has_exception(void)
{
return false;
}
bool replay_interrupt(void)
{
return true;
}
bool replay_has_interrupt(void)
{
return false;
}

View File

@@ -1,727 +0,0 @@
/*
* User emulator execution
*
* Copyright (c) 2003-2005 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "disas/disas.h"
#include "exec/exec-all.h"
#include "tcg.h"
#include "qemu/bitops.h"
#include "exec/cpu_ldst.h"
#include "translate-all.h"
#include "exec/helper-proto.h"
#include "qemu/atomic128.h"
#undef EAX
#undef ECX
#undef EDX
#undef EBX
#undef ESP
#undef EBP
#undef ESI
#undef EDI
#undef EIP
#ifdef __linux__
#include <sys/ucontext.h>
#endif
__thread uintptr_t helper_retaddr;
//#define DEBUG_SIGNAL
/* exit the current TB from a signal handler. The host registers are
restored in a state compatible with the CPU emulator
*/
static void cpu_exit_tb_from_sighandler(CPUState *cpu, sigset_t *old_set)
{
/* XXX: use siglongjmp ? */
sigprocmask(SIG_SETMASK, old_set, NULL);
cpu_loop_exit_noexc(cpu);
}
/* 'pc' is the host PC at which the exception was raised. 'address' is
the effective address of the memory exception. 'is_write' is 1 if a
write caused the exception and otherwise 0'. 'old_set' is the
signal set which should be restored */
static inline int handle_cpu_signal(uintptr_t pc, siginfo_t *info,
int is_write, sigset_t *old_set)
{
CPUState *cpu = current_cpu;
CPUClass *cc;
unsigned long address = (unsigned long)info->si_addr;
MMUAccessType access_type;
/* We must handle PC addresses from two different sources:
* a call return address and a signal frame address.
*
* Within cpu_restore_state_from_tb we assume the former and adjust
* the address by -GETPC_ADJ so that the address is within the call
* insn so that addr does not accidentally match the beginning of the
* next guest insn.
*
* However, when the PC comes from the signal frame, it points to
* the actual faulting host insn and not a call insn. Subtracting
* GETPC_ADJ in that case may accidentally match the previous guest insn.
*
* So for the later case, adjust forward to compensate for what
* will be done later by cpu_restore_state_from_tb.
*/
if (helper_retaddr) {
pc = helper_retaddr;
} else {
pc += GETPC_ADJ;
}
/* For synchronous signals we expect to be coming from the vCPU
* thread (so current_cpu should be valid) and either from running
* code or during translation which can fault as we cross pages.
*
* If neither is true then something has gone wrong and we should
* abort rather than try and restart the vCPU execution.
*/
if (!cpu || !cpu->running) {
printf("qemu:%s received signal outside vCPU context @ pc=0x%"
PRIxPTR "\n", __func__, pc);
abort();
}
#if defined(DEBUG_SIGNAL)
printf("qemu: SIGSEGV pc=0x%08lx address=%08lx w=%d oldset=0x%08lx\n",
pc, address, is_write, *(unsigned long *)old_set);
#endif
/* XXX: locking issue */
/* Note that it is important that we don't call page_unprotect() unless
* this is really a "write to nonwriteable page" fault, because
* page_unprotect() assumes that if it is called for an access to
* a page that's writeable this means we had two threads racing and
* another thread got there first and already made the page writeable;
* so we will retry the access. If we were to call page_unprotect()
* for some other kind of fault that should really be passed to the
* guest, we'd end up in an infinite loop of retrying the faulting
* access.
*/
if (is_write && info->si_signo == SIGSEGV && info->si_code == SEGV_ACCERR &&
h2g_valid(address)) {
switch (page_unprotect(h2g(address), pc)) {
case 0:
/* Fault not caused by a page marked unwritable to protect
* cached translations, must be the guest binary's problem.
*/
break;
case 1:
/* Fault caused by protection of cached translation; TBs
* invalidated, so resume execution. Retain helper_retaddr
* for a possible second fault.
*/
return 1;
case 2:
/* Fault caused by protection of cached translation, and the
* currently executing TB was modified and must be exited
* immediately. Clear helper_retaddr for next execution.
*/
helper_retaddr = 0;
cpu_exit_tb_from_sighandler(cpu, old_set);
/* NORETURN */
default:
g_assert_not_reached();
}
}
/* Convert forcefully to guest address space, invalid addresses
are still valid segv ones */
address = h2g_nocheck(address);
/*
* There is no way the target can handle this other than raising
* an exception. Undo signal and retaddr state prior to longjmp.
*/
sigprocmask(SIG_SETMASK, old_set, NULL);
helper_retaddr = 0;
cc = CPU_GET_CLASS(cpu);
access_type = is_write ? MMU_DATA_STORE : MMU_DATA_LOAD;
cc->tlb_fill(cpu, address, 0, access_type, MMU_USER_IDX, false, pc);
g_assert_not_reached();
}
#if defined(__i386__)
#if defined(__NetBSD__)
#include <ucontext.h>
#define EIP_sig(context) ((context)->uc_mcontext.__gregs[_REG_EIP])
#define TRAP_sig(context) ((context)->uc_mcontext.__gregs[_REG_TRAPNO])
#define ERROR_sig(context) ((context)->uc_mcontext.__gregs[_REG_ERR])
#define MASK_sig(context) ((context)->uc_sigmask)
#elif defined(__FreeBSD__) || defined(__DragonFly__)
#include <ucontext.h>
#define EIP_sig(context) (*((unsigned long *)&(context)->uc_mcontext.mc_eip))
#define TRAP_sig(context) ((context)->uc_mcontext.mc_trapno)
#define ERROR_sig(context) ((context)->uc_mcontext.mc_err)
#define MASK_sig(context) ((context)->uc_sigmask)
#elif defined(__OpenBSD__)
#define EIP_sig(context) ((context)->sc_eip)
#define TRAP_sig(context) ((context)->sc_trapno)
#define ERROR_sig(context) ((context)->sc_err)
#define MASK_sig(context) ((context)->sc_mask)
#else
#define EIP_sig(context) ((context)->uc_mcontext.gregs[REG_EIP])
#define TRAP_sig(context) ((context)->uc_mcontext.gregs[REG_TRAPNO])
#define ERROR_sig(context) ((context)->uc_mcontext.gregs[REG_ERR])
#define MASK_sig(context) ((context)->uc_sigmask)
#endif
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
#if defined(__NetBSD__) || defined(__FreeBSD__) || defined(__DragonFly__)
ucontext_t *uc = puc;
#elif defined(__OpenBSD__)
struct sigcontext *uc = puc;
#else
ucontext_t *uc = puc;
#endif
unsigned long pc;
int trapno;
#ifndef REG_EIP
/* for glibc 2.1 */
#define REG_EIP EIP
#define REG_ERR ERR
#define REG_TRAPNO TRAPNO
#endif
pc = EIP_sig(uc);
trapno = TRAP_sig(uc);
return handle_cpu_signal(pc, info,
trapno == 0xe ? (ERROR_sig(uc) >> 1) & 1 : 0,
&MASK_sig(uc));
}
#elif defined(__x86_64__)
#ifdef __NetBSD__
#define PC_sig(context) _UC_MACHINE_PC(context)
#define TRAP_sig(context) ((context)->uc_mcontext.__gregs[_REG_TRAPNO])
#define ERROR_sig(context) ((context)->uc_mcontext.__gregs[_REG_ERR])
#define MASK_sig(context) ((context)->uc_sigmask)
#elif defined(__OpenBSD__)
#define PC_sig(context) ((context)->sc_rip)
#define TRAP_sig(context) ((context)->sc_trapno)
#define ERROR_sig(context) ((context)->sc_err)
#define MASK_sig(context) ((context)->sc_mask)
#elif defined(__FreeBSD__) || defined(__DragonFly__)
#include <ucontext.h>
#define PC_sig(context) (*((unsigned long *)&(context)->uc_mcontext.mc_rip))
#define TRAP_sig(context) ((context)->uc_mcontext.mc_trapno)
#define ERROR_sig(context) ((context)->uc_mcontext.mc_err)
#define MASK_sig(context) ((context)->uc_sigmask)
#else
#define PC_sig(context) ((context)->uc_mcontext.gregs[REG_RIP])
#define TRAP_sig(context) ((context)->uc_mcontext.gregs[REG_TRAPNO])
#define ERROR_sig(context) ((context)->uc_mcontext.gregs[REG_ERR])
#define MASK_sig(context) ((context)->uc_sigmask)
#endif
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
unsigned long pc;
#if defined(__NetBSD__) || defined(__FreeBSD__) || defined(__DragonFly__)
ucontext_t *uc = puc;
#elif defined(__OpenBSD__)
struct sigcontext *uc = puc;
#else
ucontext_t *uc = puc;
#endif
pc = PC_sig(uc);
return handle_cpu_signal(pc, info,
TRAP_sig(uc) == 0xe ? (ERROR_sig(uc) >> 1) & 1 : 0,
&MASK_sig(uc));
}
#elif defined(_ARCH_PPC)
/***********************************************************************
* signal context platform-specific definitions
* From Wine
*/
#ifdef linux
/* All Registers access - only for local access */
#define REG_sig(reg_name, context) \
((context)->uc_mcontext.regs->reg_name)
/* Gpr Registers access */
#define GPR_sig(reg_num, context) REG_sig(gpr[reg_num], context)
/* Program counter */
#define IAR_sig(context) REG_sig(nip, context)
/* Machine State Register (Supervisor) */
#define MSR_sig(context) REG_sig(msr, context)
/* Count register */
#define CTR_sig(context) REG_sig(ctr, context)
/* User's integer exception register */
#define XER_sig(context) REG_sig(xer, context)
/* Link register */
#define LR_sig(context) REG_sig(link, context)
/* Condition register */
#define CR_sig(context) REG_sig(ccr, context)
/* Float Registers access */
#define FLOAT_sig(reg_num, context) \
(((double *)((char *)((context)->uc_mcontext.regs + 48 * 4)))[reg_num])
#define FPSCR_sig(context) \
(*(int *)((char *)((context)->uc_mcontext.regs + (48 + 32 * 2) * 4)))
/* Exception Registers access */
#define DAR_sig(context) REG_sig(dar, context)
#define DSISR_sig(context) REG_sig(dsisr, context)
#define TRAP_sig(context) REG_sig(trap, context)
#endif /* linux */
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
#include <ucontext.h>
#define IAR_sig(context) ((context)->uc_mcontext.mc_srr0)
#define MSR_sig(context) ((context)->uc_mcontext.mc_srr1)
#define CTR_sig(context) ((context)->uc_mcontext.mc_ctr)
#define XER_sig(context) ((context)->uc_mcontext.mc_xer)
#define LR_sig(context) ((context)->uc_mcontext.mc_lr)
#define CR_sig(context) ((context)->uc_mcontext.mc_cr)
/* Exception Registers access */
#define DAR_sig(context) ((context)->uc_mcontext.mc_dar)
#define DSISR_sig(context) ((context)->uc_mcontext.mc_dsisr)
#define TRAP_sig(context) ((context)->uc_mcontext.mc_exc)
#endif /* __FreeBSD__|| __FreeBSD_kernel__ */
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
ucontext_t *uc = puc;
#else
ucontext_t *uc = puc;
#endif
unsigned long pc;
int is_write;
pc = IAR_sig(uc);
is_write = 0;
#if 0
/* ppc 4xx case */
if (DSISR_sig(uc) & 0x00800000) {
is_write = 1;
}
#else
if (TRAP_sig(uc) != 0x400 && (DSISR_sig(uc) & 0x02000000)) {
is_write = 1;
}
#endif
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__alpha__)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
uint32_t *pc = uc->uc_mcontext.sc_pc;
uint32_t insn = *pc;
int is_write = 0;
/* XXX: need kernel patch to get write flag faster */
switch (insn >> 26) {
case 0x0d: /* stw */
case 0x0e: /* stb */
case 0x0f: /* stq_u */
case 0x24: /* stf */
case 0x25: /* stg */
case 0x26: /* sts */
case 0x27: /* stt */
case 0x2c: /* stl */
case 0x2d: /* stq */
case 0x2e: /* stl_c */
case 0x2f: /* stq_c */
is_write = 1;
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__sparc__)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
int is_write;
uint32_t insn;
#if !defined(__arch64__) || defined(CONFIG_SOLARIS)
uint32_t *regs = (uint32_t *)(info + 1);
void *sigmask = (regs + 20);
/* XXX: is there a standard glibc define ? */
unsigned long pc = regs[1];
#else
#ifdef __linux__
struct sigcontext *sc = puc;
unsigned long pc = sc->sigc_regs.tpc;
void *sigmask = (void *)sc->sigc_mask;
#elif defined(__OpenBSD__)
struct sigcontext *uc = puc;
unsigned long pc = uc->sc_pc;
void *sigmask = (void *)(long)uc->sc_mask;
#elif defined(__NetBSD__)
ucontext_t *uc = puc;
unsigned long pc = _UC_MACHINE_PC(uc);
void *sigmask = (void *)&uc->uc_sigmask;
#endif
#endif
/* XXX: need kernel patch to get write flag faster */
is_write = 0;
insn = *(uint32_t *)pc;
if ((insn >> 30) == 3) {
switch ((insn >> 19) & 0x3f) {
case 0x05: /* stb */
case 0x15: /* stba */
case 0x06: /* sth */
case 0x16: /* stha */
case 0x04: /* st */
case 0x14: /* sta */
case 0x07: /* std */
case 0x17: /* stda */
case 0x0e: /* stx */
case 0x1e: /* stxa */
case 0x24: /* stf */
case 0x34: /* stfa */
case 0x27: /* stdf */
case 0x37: /* stdfa */
case 0x26: /* stqf */
case 0x36: /* stqfa */
case 0x25: /* stfsr */
case 0x3c: /* casa */
case 0x3e: /* casxa */
is_write = 1;
break;
}
}
return handle_cpu_signal(pc, info, is_write, sigmask);
}
#elif defined(__arm__)
#if defined(__NetBSD__)
#include <ucontext.h>
#endif
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
#if defined(__NetBSD__)
ucontext_t *uc = puc;
#else
ucontext_t *uc = puc;
#endif
unsigned long pc;
int is_write;
#if defined(__NetBSD__)
pc = uc->uc_mcontext.__gregs[_REG_R15];
#elif defined(__GLIBC__) && (__GLIBC__ < 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ <= 3))
pc = uc->uc_mcontext.gregs[R15];
#else
pc = uc->uc_mcontext.arm_pc;
#endif
/* error_code is the FSR value, in which bit 11 is WnR (assuming a v6 or
* later processor; on v5 we will always report this as a read).
*/
is_write = extract32(uc->uc_mcontext.error_code, 11, 1);
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__aarch64__)
#ifndef ESR_MAGIC
/* Pre-3.16 kernel headers don't have these, so provide fallback definitions */
#define ESR_MAGIC 0x45535201
struct esr_context {
struct _aarch64_ctx head;
uint64_t esr;
};
#endif
static inline struct _aarch64_ctx *first_ctx(ucontext_t *uc)
{
return (struct _aarch64_ctx *)&uc->uc_mcontext.__reserved;
}
static inline struct _aarch64_ctx *next_ctx(struct _aarch64_ctx *hdr)
{
return (struct _aarch64_ctx *)((char *)hdr + hdr->size);
}
int cpu_signal_handler(int host_signum, void *pinfo, void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
uintptr_t pc = uc->uc_mcontext.pc;
bool is_write;
struct _aarch64_ctx *hdr;
struct esr_context const *esrctx = NULL;
/* Find the esr_context, which has the WnR bit in it */
for (hdr = first_ctx(uc); hdr->magic; hdr = next_ctx(hdr)) {
if (hdr->magic == ESR_MAGIC) {
esrctx = (struct esr_context const *)hdr;
break;
}
}
if (esrctx) {
/* For data aborts ESR.EC is 0b10010x: then bit 6 is the WnR bit */
uint64_t esr = esrctx->esr;
is_write = extract32(esr, 27, 5) == 0x12 && extract32(esr, 6, 1) == 1;
} else {
/*
* Fall back to parsing instructions; will only be needed
* for really ancient (pre-3.16) kernels.
*/
uint32_t insn = *(uint32_t *)pc;
is_write = ((insn & 0xbfff0000) == 0x0c000000 /* C3.3.1 */
|| (insn & 0xbfe00000) == 0x0c800000 /* C3.3.2 */
|| (insn & 0xbfdf0000) == 0x0d000000 /* C3.3.3 */
|| (insn & 0xbfc00000) == 0x0d800000 /* C3.3.4 */
|| (insn & 0x3f400000) == 0x08000000 /* C3.3.6 */
|| (insn & 0x3bc00000) == 0x39000000 /* C3.3.13 */
|| (insn & 0x3fc00000) == 0x3d800000 /* ... 128bit */
/* Ignore bits 10, 11 & 21, controlling indexing. */
|| (insn & 0x3bc00000) == 0x38000000 /* C3.3.8-12 */
|| (insn & 0x3fe00000) == 0x3c800000 /* ... 128bit */
/* Ignore bits 23 & 24, controlling indexing. */
|| (insn & 0x3a400000) == 0x28000000); /* C3.3.7,14-16 */
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__s390__)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
unsigned long pc;
uint16_t *pinsn;
int is_write = 0;
pc = uc->uc_mcontext.psw.addr;
/* ??? On linux, the non-rt signal handler has 4 (!) arguments instead
of the normal 2 arguments. The 3rd argument contains the "int_code"
from the hardware which does in fact contain the is_write value.
The rt signal handler, as far as I can tell, does not give this value
at all. Not that we could get to it from here even if it were. */
/* ??? This is not even close to complete, since it ignores all
of the read-modify-write instructions. */
pinsn = (uint16_t *)pc;
switch (pinsn[0] >> 8) {
case 0x50: /* ST */
case 0x42: /* STC */
case 0x40: /* STH */
is_write = 1;
break;
case 0xc4: /* RIL format insns */
switch (pinsn[0] & 0xf) {
case 0xf: /* STRL */
case 0xb: /* STGRL */
case 0x7: /* STHRL */
is_write = 1;
}
break;
case 0xe3: /* RXY format insns */
switch (pinsn[2] & 0xff) {
case 0x50: /* STY */
case 0x24: /* STG */
case 0x72: /* STCY */
case 0x70: /* STHY */
case 0x8e: /* STPQ */
case 0x3f: /* STRVH */
case 0x3e: /* STRV */
case 0x2f: /* STRVG */
is_write = 1;
}
break;
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__mips__)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
greg_t pc = uc->uc_mcontext.pc;
int is_write;
/* XXX: compute is_write */
is_write = 0;
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__riscv)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
greg_t pc = uc->uc_mcontext.__gregs[REG_PC];
uint32_t insn = *(uint32_t *)pc;
int is_write = 0;
/* Detect store by reading the instruction at the program
counter. Note: we currently only generate 32-bit
instructions so we thus only detect 32-bit stores */
switch (((insn >> 0) & 0b11)) {
case 3:
switch (((insn >> 2) & 0b11111)) {
case 8:
switch (((insn >> 12) & 0b111)) {
case 0: /* sb */
case 1: /* sh */
case 2: /* sw */
case 3: /* sd */
case 4: /* sq */
is_write = 1;
break;
default:
break;
}
break;
case 9:
switch (((insn >> 12) & 0b111)) {
case 2: /* fsw */
case 3: /* fsd */
case 4: /* fsq */
is_write = 1;
break;
default:
break;
}
break;
default:
break;
}
}
/* Check for compressed instructions */
switch (((insn >> 13) & 0b111)) {
case 7:
switch (insn & 0b11) {
case 0: /*c.sd */
case 2: /* c.sdsp */
is_write = 1;
break;
default:
break;
}
break;
case 6:
switch (insn & 0b11) {
case 0: /* c.sw */
case 3: /* c.swsp */
is_write = 1;
break;
default:
break;
}
break;
default:
break;
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#else
#error host CPU specific signal handler needed
#endif
/* The softmmu versions of these helpers are in cputlb.c. */
/* Do not allow unaligned operations to proceed. Return the host address. */
static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
int size, uintptr_t retaddr)
{
/* Enforce qemu required alignment. */
if (unlikely(addr & (size - 1))) {
cpu_loop_exit_atomic(env_cpu(env), retaddr);
}
helper_retaddr = retaddr;
return g2h(addr);
}
/* Macro to call the above, with local variables from the use context. */
#define ATOMIC_MMU_DECLS do {} while (0)
#define ATOMIC_MMU_LOOKUP atomic_mmu_lookup(env, addr, DATA_SIZE, GETPC())
#define ATOMIC_MMU_CLEANUP do { helper_retaddr = 0; } while (0)
#define ATOMIC_NAME(X) HELPER(glue(glue(atomic_ ## X, SUFFIX), END))
#define EXTRA_ARGS
#define DATA_SIZE 1
#include "atomic_template.h"
#define DATA_SIZE 2
#include "atomic_template.h"
#define DATA_SIZE 4
#include "atomic_template.h"
#ifdef CONFIG_ATOMIC64
#define DATA_SIZE 8
#include "atomic_template.h"
#endif
/* The following is only callable from other helpers, and matches up
with the softmmu version. */
#if HAVE_ATOMIC128 || HAVE_CMPXCHG128
#undef EXTRA_ARGS
#undef ATOMIC_NAME
#undef ATOMIC_MMU_LOOKUP
#define EXTRA_ARGS , TCGMemOpIdx oi, uintptr_t retaddr
#define ATOMIC_NAME(X) \
HELPER(glue(glue(glue(atomic_ ## X, SUFFIX), END), _mmu))
#define ATOMIC_MMU_LOOKUP atomic_mmu_lookup(env, addr, DATA_SIZE, retaddr)
#define DATA_SIZE 16
#include "atomic_template.h"
#endif

499
aio-posix.c Normal file
View File

@@ -0,0 +1,499 @@
/*
* QEMU aio implementation
*
* Copyright IBM, Corp. 2008
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "block/block.h"
#include "qemu/queue.h"
#include "qemu/sockets.h"
#ifdef CONFIG_EPOLL_CREATE1
#include <sys/epoll.h>
#endif
struct AioHandler
{
GPollFD pfd;
IOHandler *io_read;
IOHandler *io_write;
int deleted;
void *opaque;
bool is_external;
QLIST_ENTRY(AioHandler) node;
};
#ifdef CONFIG_EPOLL_CREATE1
/* The fd number threashold to switch to epoll */
#define EPOLL_ENABLE_THRESHOLD 64
static void aio_epoll_disable(AioContext *ctx)
{
ctx->epoll_available = false;
if (!ctx->epoll_enabled) {
return;
}
ctx->epoll_enabled = false;
close(ctx->epollfd);
}
static inline int epoll_events_from_pfd(int pfd_events)
{
return (pfd_events & G_IO_IN ? EPOLLIN : 0) |
(pfd_events & G_IO_OUT ? EPOLLOUT : 0) |
(pfd_events & G_IO_HUP ? EPOLLHUP : 0) |
(pfd_events & G_IO_ERR ? EPOLLERR : 0);
}
static bool aio_epoll_try_enable(AioContext *ctx)
{
AioHandler *node;
struct epoll_event event;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
int r;
if (node->deleted || !node->pfd.events) {
continue;
}
event.events = epoll_events_from_pfd(node->pfd.events);
event.data.ptr = node;
r = epoll_ctl(ctx->epollfd, EPOLL_CTL_ADD, node->pfd.fd, &event);
if (r) {
return false;
}
}
ctx->epoll_enabled = true;
return true;
}
static void aio_epoll_update(AioContext *ctx, AioHandler *node, bool is_new)
{
struct epoll_event event;
int r;
if (!ctx->epoll_enabled) {
return;
}
if (!node->pfd.events) {
r = epoll_ctl(ctx->epollfd, EPOLL_CTL_DEL, node->pfd.fd, &event);
if (r) {
aio_epoll_disable(ctx);
}
} else {
event.data.ptr = node;
event.events = epoll_events_from_pfd(node->pfd.events);
if (is_new) {
r = epoll_ctl(ctx->epollfd, EPOLL_CTL_ADD, node->pfd.fd, &event);
if (r) {
aio_epoll_disable(ctx);
}
} else {
r = epoll_ctl(ctx->epollfd, EPOLL_CTL_MOD, node->pfd.fd, &event);
if (r) {
aio_epoll_disable(ctx);
}
}
}
}
static int aio_epoll(AioContext *ctx, GPollFD *pfds,
unsigned npfd, int64_t timeout)
{
AioHandler *node;
int i, ret = 0;
struct epoll_event events[128];
assert(npfd == 1);
assert(pfds[0].fd == ctx->epollfd);
if (timeout > 0) {
ret = qemu_poll_ns(pfds, npfd, timeout);
}
if (timeout <= 0 || ret > 0) {
ret = epoll_wait(ctx->epollfd, events,
sizeof(events) / sizeof(events[0]),
timeout);
if (ret <= 0) {
goto out;
}
for (i = 0; i < ret; i++) {
int ev = events[i].events;
node = events[i].data.ptr;
node->pfd.revents = (ev & EPOLLIN ? G_IO_IN : 0) |
(ev & EPOLLOUT ? G_IO_OUT : 0) |
(ev & EPOLLHUP ? G_IO_HUP : 0) |
(ev & EPOLLERR ? G_IO_ERR : 0);
}
}
out:
return ret;
}
static bool aio_epoll_enabled(AioContext *ctx)
{
/* Fall back to ppoll when external clients are disabled. */
return !aio_external_disabled(ctx) && ctx->epoll_enabled;
}
static bool aio_epoll_check_poll(AioContext *ctx, GPollFD *pfds,
unsigned npfd, int64_t timeout)
{
if (!ctx->epoll_available) {
return false;
}
if (aio_epoll_enabled(ctx)) {
return true;
}
if (npfd >= EPOLL_ENABLE_THRESHOLD) {
if (aio_epoll_try_enable(ctx)) {
return true;
} else {
aio_epoll_disable(ctx);
}
}
return false;
}
#else
static void aio_epoll_update(AioContext *ctx, AioHandler *node, bool is_new)
{
}
static int aio_epoll(AioContext *ctx, GPollFD *pfds,
unsigned npfd, int64_t timeout)
{
assert(false);
}
static bool aio_epoll_enabled(AioContext *ctx)
{
return false;
}
static bool aio_epoll_check_poll(AioContext *ctx, GPollFD *pfds,
unsigned npfd, int64_t timeout)
{
return false;
}
#endif
static AioHandler *find_aio_handler(AioContext *ctx, int fd)
{
AioHandler *node;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (node->pfd.fd == fd)
if (!node->deleted)
return node;
}
return NULL;
}
void aio_set_fd_handler(AioContext *ctx,
int fd,
bool is_external,
IOHandler *io_read,
IOHandler *io_write,
void *opaque)
{
AioHandler *node;
bool is_new = false;
bool deleted = false;
node = find_aio_handler(ctx, fd);
/* Are we deleting the fd handler? */
if (!io_read && !io_write) {
if (node) {
g_source_remove_poll(&ctx->source, &node->pfd);
/* If the lock is held, just mark the node as deleted */
if (ctx->walking_handlers) {
node->deleted = 1;
node->pfd.revents = 0;
} else {
/* Otherwise, delete it for real. We can't just mark it as
* deleted because deleted nodes are only cleaned up after
* releasing the walking_handlers lock.
*/
QLIST_REMOVE(node, node);
deleted = true;
}
}
} else {
if (node == NULL) {
/* Alloc and insert if it's not already there */
node = g_new0(AioHandler, 1);
node->pfd.fd = fd;
QLIST_INSERT_HEAD(&ctx->aio_handlers, node, node);
g_source_add_poll(&ctx->source, &node->pfd);
is_new = true;
}
/* Update handler with latest information */
node->io_read = io_read;
node->io_write = io_write;
node->opaque = opaque;
node->is_external = is_external;
node->pfd.events = (io_read ? G_IO_IN | G_IO_HUP | G_IO_ERR : 0);
node->pfd.events |= (io_write ? G_IO_OUT | G_IO_ERR : 0);
}
aio_epoll_update(ctx, node, is_new);
aio_notify(ctx);
if (deleted) {
g_free(node);
}
}
void aio_set_event_notifier(AioContext *ctx,
EventNotifier *notifier,
bool is_external,
EventNotifierHandler *io_read)
{
aio_set_fd_handler(ctx, event_notifier_get_fd(notifier),
is_external, (IOHandler *)io_read, NULL, notifier);
}
bool aio_prepare(AioContext *ctx)
{
return false;
}
bool aio_pending(AioContext *ctx)
{
AioHandler *node;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
int revents;
revents = node->pfd.revents & node->pfd.events;
if (revents & (G_IO_IN | G_IO_HUP | G_IO_ERR) && node->io_read &&
aio_node_check(ctx, node->is_external)) {
return true;
}
if (revents & (G_IO_OUT | G_IO_ERR) && node->io_write &&
aio_node_check(ctx, node->is_external)) {
return true;
}
}
return false;
}
bool aio_dispatch(AioContext *ctx)
{
AioHandler *node;
bool progress = false;
/*
* If there are callbacks left that have been queued, we need to call them.
* Do not call select in this case, because it is possible that the caller
* does not need a complete flush (as is the case for aio_poll loops).
*/
if (aio_bh_poll(ctx)) {
progress = true;
}
/*
* We have to walk very carefully in case aio_set_fd_handler is
* called while we're walking.
*/
node = QLIST_FIRST(&ctx->aio_handlers);
while (node) {
AioHandler *tmp;
int revents;
ctx->walking_handlers++;
revents = node->pfd.revents & node->pfd.events;
node->pfd.revents = 0;
if (!node->deleted &&
(revents & (G_IO_IN | G_IO_HUP | G_IO_ERR)) &&
aio_node_check(ctx, node->is_external) &&
node->io_read) {
node->io_read(node->opaque);
/* aio_notify() does not count as progress */
if (node->opaque != &ctx->notifier) {
progress = true;
}
}
if (!node->deleted &&
(revents & (G_IO_OUT | G_IO_ERR)) &&
aio_node_check(ctx, node->is_external) &&
node->io_write) {
node->io_write(node->opaque);
progress = true;
}
tmp = node;
node = QLIST_NEXT(node, node);
ctx->walking_handlers--;
if (!ctx->walking_handlers && tmp->deleted) {
QLIST_REMOVE(tmp, node);
g_free(tmp);
}
}
/* Run our timers */
progress |= timerlistgroup_run_timers(&ctx->tlg);
return progress;
}
/* These thread-local variables are used only in a small part of aio_poll
* around the call to the poll() system call. In particular they are not
* used while aio_poll is performing callbacks, which makes it much easier
* to think about reentrancy!
*
* Stack-allocated arrays would be perfect but they have size limitations;
* heap allocation is expensive enough that we want to reuse arrays across
* calls to aio_poll(). And because poll() has to be called without holding
* any lock, the arrays cannot be stored in AioContext. Thread-local data
* has none of the disadvantages of these three options.
*/
static __thread GPollFD *pollfds;
static __thread AioHandler **nodes;
static __thread unsigned npfd, nalloc;
static __thread Notifier pollfds_cleanup_notifier;
static void pollfds_cleanup(Notifier *n, void *unused)
{
g_assert(npfd == 0);
g_free(pollfds);
g_free(nodes);
nalloc = 0;
}
static void add_pollfd(AioHandler *node)
{
if (npfd == nalloc) {
if (nalloc == 0) {
pollfds_cleanup_notifier.notify = pollfds_cleanup;
qemu_thread_atexit_add(&pollfds_cleanup_notifier);
nalloc = 8;
} else {
g_assert(nalloc <= INT_MAX);
nalloc *= 2;
}
pollfds = g_renew(GPollFD, pollfds, nalloc);
nodes = g_renew(AioHandler *, nodes, nalloc);
}
nodes[npfd] = node;
pollfds[npfd] = (GPollFD) {
.fd = node->pfd.fd,
.events = node->pfd.events,
};
npfd++;
}
bool aio_poll(AioContext *ctx, bool blocking)
{
AioHandler *node;
int i, ret;
bool progress;
int64_t timeout;
aio_context_acquire(ctx);
progress = false;
/* aio_notify can avoid the expensive event_notifier_set if
* everything (file descriptors, bottom halves, timers) will
* be re-evaluated before the next blocking poll(). This is
* already true when aio_poll is called with blocking == false;
* if blocking == true, it is only true after poll() returns,
* so disable the optimization now.
*/
if (blocking) {
atomic_add(&ctx->notify_me, 2);
}
ctx->walking_handlers++;
assert(npfd == 0);
/* fill pollfds */
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (!node->deleted && node->pfd.events
&& !aio_epoll_enabled(ctx)
&& aio_node_check(ctx, node->is_external)) {
add_pollfd(node);
}
}
timeout = blocking ? aio_compute_timeout(ctx) : 0;
/* wait until next event */
if (timeout) {
aio_context_release(ctx);
}
if (aio_epoll_check_poll(ctx, pollfds, npfd, timeout)) {
AioHandler epoll_handler;
epoll_handler.pfd.fd = ctx->epollfd;
epoll_handler.pfd.events = G_IO_IN | G_IO_OUT | G_IO_HUP | G_IO_ERR;
npfd = 0;
add_pollfd(&epoll_handler);
ret = aio_epoll(ctx, pollfds, npfd, timeout);
} else {
ret = qemu_poll_ns(pollfds, npfd, timeout);
}
if (blocking) {
atomic_sub(&ctx->notify_me, 2);
}
if (timeout) {
aio_context_acquire(ctx);
}
aio_notify_accept(ctx);
/* if we have any readable fds, dispatch event */
if (ret > 0) {
for (i = 0; i < npfd; i++) {
nodes[i]->pfd.revents = pollfds[i].revents;
}
}
npfd = 0;
ctx->walking_handlers--;
/* Run dispatch even if there were no readable fds to run timers */
if (aio_dispatch(ctx)) {
progress = true;
}
aio_context_release(ctx);
return progress;
}
void aio_context_setup(AioContext *ctx, Error **errp)
{
#ifdef CONFIG_EPOLL_CREATE1
assert(!ctx->epollfd);
ctx->epollfd = epoll_create1(EPOLL_CLOEXEC);
if (ctx->epollfd == -1) {
ctx->epoll_available = false;
} else {
ctx->epoll_available = true;
}
#endif
}

376
aio-win32.c Normal file
View File

@@ -0,0 +1,376 @@
/*
* QEMU aio implementation
*
* Copyright IBM Corp., 2008
* Copyright Red Hat Inc., 2012
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
* Paolo Bonzini <pbonzini@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "block/block.h"
#include "qemu/queue.h"
#include "qemu/sockets.h"
struct AioHandler {
EventNotifier *e;
IOHandler *io_read;
IOHandler *io_write;
EventNotifierHandler *io_notify;
GPollFD pfd;
int deleted;
void *opaque;
bool is_external;
QLIST_ENTRY(AioHandler) node;
};
void aio_set_fd_handler(AioContext *ctx,
int fd,
bool is_external,
IOHandler *io_read,
IOHandler *io_write,
void *opaque)
{
/* fd is a SOCKET in our case */
AioHandler *node;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (node->pfd.fd == fd && !node->deleted) {
break;
}
}
/* Are we deleting the fd handler? */
if (!io_read && !io_write) {
if (node) {
/* If the lock is held, just mark the node as deleted */
if (ctx->walking_handlers) {
node->deleted = 1;
node->pfd.revents = 0;
} else {
/* Otherwise, delete it for real. We can't just mark it as
* deleted because deleted nodes are only cleaned up after
* releasing the walking_handlers lock.
*/
QLIST_REMOVE(node, node);
g_free(node);
}
}
} else {
HANDLE event;
if (node == NULL) {
/* Alloc and insert if it's not already there */
node = g_new0(AioHandler, 1);
node->pfd.fd = fd;
QLIST_INSERT_HEAD(&ctx->aio_handlers, node, node);
}
node->pfd.events = 0;
if (node->io_read) {
node->pfd.events |= G_IO_IN;
}
if (node->io_write) {
node->pfd.events |= G_IO_OUT;
}
node->e = &ctx->notifier;
/* Update handler with latest information */
node->opaque = opaque;
node->io_read = io_read;
node->io_write = io_write;
node->is_external = is_external;
event = event_notifier_get_handle(&ctx->notifier);
WSAEventSelect(node->pfd.fd, event,
FD_READ | FD_ACCEPT | FD_CLOSE |
FD_CONNECT | FD_WRITE | FD_OOB);
}
aio_notify(ctx);
}
void aio_set_event_notifier(AioContext *ctx,
EventNotifier *e,
bool is_external,
EventNotifierHandler *io_notify)
{
AioHandler *node;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (node->e == e && !node->deleted) {
break;
}
}
/* Are we deleting the fd handler? */
if (!io_notify) {
if (node) {
g_source_remove_poll(&ctx->source, &node->pfd);
/* If the lock is held, just mark the node as deleted */
if (ctx->walking_handlers) {
node->deleted = 1;
node->pfd.revents = 0;
} else {
/* Otherwise, delete it for real. We can't just mark it as
* deleted because deleted nodes are only cleaned up after
* releasing the walking_handlers lock.
*/
QLIST_REMOVE(node, node);
g_free(node);
}
}
} else {
if (node == NULL) {
/* Alloc and insert if it's not already there */
node = g_new0(AioHandler, 1);
node->e = e;
node->pfd.fd = (uintptr_t)event_notifier_get_handle(e);
node->pfd.events = G_IO_IN;
node->is_external = is_external;
QLIST_INSERT_HEAD(&ctx->aio_handlers, node, node);
g_source_add_poll(&ctx->source, &node->pfd);
}
/* Update handler with latest information */
node->io_notify = io_notify;
}
aio_notify(ctx);
}
bool aio_prepare(AioContext *ctx)
{
static struct timeval tv0;
AioHandler *node;
bool have_select_revents = false;
fd_set rfds, wfds;
/* fill fd sets */
FD_ZERO(&rfds);
FD_ZERO(&wfds);
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (node->io_read) {
FD_SET ((SOCKET)node->pfd.fd, &rfds);
}
if (node->io_write) {
FD_SET ((SOCKET)node->pfd.fd, &wfds);
}
}
if (select(0, &rfds, &wfds, NULL, &tv0) > 0) {
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
node->pfd.revents = 0;
if (FD_ISSET(node->pfd.fd, &rfds)) {
node->pfd.revents |= G_IO_IN;
have_select_revents = true;
}
if (FD_ISSET(node->pfd.fd, &wfds)) {
node->pfd.revents |= G_IO_OUT;
have_select_revents = true;
}
}
}
return have_select_revents;
}
bool aio_pending(AioContext *ctx)
{
AioHandler *node;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (node->pfd.revents && node->io_notify) {
return true;
}
if ((node->pfd.revents & G_IO_IN) && node->io_read) {
return true;
}
if ((node->pfd.revents & G_IO_OUT) && node->io_write) {
return true;
}
}
return false;
}
static bool aio_dispatch_handlers(AioContext *ctx, HANDLE event)
{
AioHandler *node;
bool progress = false;
/*
* We have to walk very carefully in case aio_set_fd_handler is
* called while we're walking.
*/
node = QLIST_FIRST(&ctx->aio_handlers);
while (node) {
AioHandler *tmp;
int revents = node->pfd.revents;
ctx->walking_handlers++;
if (!node->deleted &&
(revents || event_notifier_get_handle(node->e) == event) &&
node->io_notify) {
node->pfd.revents = 0;
node->io_notify(node->e);
/* aio_notify() does not count as progress */
if (node->e != &ctx->notifier) {
progress = true;
}
}
if (!node->deleted &&
(node->io_read || node->io_write)) {
node->pfd.revents = 0;
if ((revents & G_IO_IN) && node->io_read) {
node->io_read(node->opaque);
progress = true;
}
if ((revents & G_IO_OUT) && node->io_write) {
node->io_write(node->opaque);
progress = true;
}
/* if the next select() will return an event, we have progressed */
if (event == event_notifier_get_handle(&ctx->notifier)) {
WSANETWORKEVENTS ev;
WSAEnumNetworkEvents(node->pfd.fd, event, &ev);
if (ev.lNetworkEvents) {
progress = true;
}
}
}
tmp = node;
node = QLIST_NEXT(node, node);
ctx->walking_handlers--;
if (!ctx->walking_handlers && tmp->deleted) {
QLIST_REMOVE(tmp, node);
g_free(tmp);
}
}
return progress;
}
bool aio_dispatch(AioContext *ctx)
{
bool progress;
progress = aio_bh_poll(ctx);
progress |= aio_dispatch_handlers(ctx, INVALID_HANDLE_VALUE);
progress |= timerlistgroup_run_timers(&ctx->tlg);
return progress;
}
bool aio_poll(AioContext *ctx, bool blocking)
{
AioHandler *node;
HANDLE events[MAXIMUM_WAIT_OBJECTS + 1];
bool progress, have_select_revents, first;
int count;
int timeout;
aio_context_acquire(ctx);
progress = false;
/* aio_notify can avoid the expensive event_notifier_set if
* everything (file descriptors, bottom halves, timers) will
* be re-evaluated before the next blocking poll(). This is
* already true when aio_poll is called with blocking == false;
* if blocking == true, it is only true after poll() returns,
* so disable the optimization now.
*/
if (blocking) {
atomic_add(&ctx->notify_me, 2);
}
have_select_revents = aio_prepare(ctx);
ctx->walking_handlers++;
/* fill fd sets */
count = 0;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (!node->deleted && node->io_notify
&& aio_node_check(ctx, node->is_external)) {
events[count++] = event_notifier_get_handle(node->e);
}
}
ctx->walking_handlers--;
first = true;
/* ctx->notifier is always registered. */
assert(count > 0);
/* Multiple iterations, all of them non-blocking except the first,
* may be necessary to process all pending events. After the first
* WaitForMultipleObjects call ctx->notify_me will be decremented.
*/
do {
HANDLE event;
int ret;
timeout = blocking && !have_select_revents
? qemu_timeout_ns_to_ms(aio_compute_timeout(ctx)) : 0;
if (timeout) {
aio_context_release(ctx);
}
ret = WaitForMultipleObjects(count, events, FALSE, timeout);
if (blocking) {
assert(first);
atomic_sub(&ctx->notify_me, 2);
}
if (timeout) {
aio_context_acquire(ctx);
}
if (first) {
aio_notify_accept(ctx);
progress |= aio_bh_poll(ctx);
first = false;
}
/* if we have any signaled events, dispatch event */
event = NULL;
if ((DWORD) (ret - WAIT_OBJECT_0) < count) {
event = events[ret - WAIT_OBJECT_0];
events[ret - WAIT_OBJECT_0] = events[--count];
} else if (!have_select_revents) {
break;
}
have_select_revents = false;
blocking = false;
progress |= aio_dispatch_handlers(ctx, event);
} while (count > 0);
progress |= timerlistgroup_run_timers(&ctx->tlg);
aio_context_release(ctx);
return progress;
}
void aio_context_setup(AioContext *ctx, Error **errp)
{
}

View File

@@ -22,15 +22,14 @@
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "sysemu/sysemu.h"
#include "sysemu/arch_init.h"
#include "hw/pci/pci.h"
#include "hw/audio/soundhw.h"
#include "qapi/qapi-commands-misc.h"
#include "qapi/error.h"
#include "hw/audio/audio.h"
#include "hw/smbios/smbios.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "qmp-commands.h"
#include "hw/acpi/acpi.h"
#include "qemu/help_option.h"
@@ -51,44 +50,235 @@ int graphic_depth = 32;
#define QEMU_ARCH QEMU_ARCH_ARM
#elif defined(TARGET_CRIS)
#define QEMU_ARCH QEMU_ARCH_CRIS
#elif defined(TARGET_HPPA)
#define QEMU_ARCH QEMU_ARCH_HPPA
#elif defined(TARGET_I386)
#define QEMU_ARCH QEMU_ARCH_I386
#elif defined(TARGET_LM32)
#define QEMU_ARCH QEMU_ARCH_LM32
#elif defined(TARGET_M68K)
#define QEMU_ARCH QEMU_ARCH_M68K
#elif defined(TARGET_LM32)
#define QEMU_ARCH QEMU_ARCH_LM32
#elif defined(TARGET_MICROBLAZE)
#define QEMU_ARCH QEMU_ARCH_MICROBLAZE
#elif defined(TARGET_MIPS)
#define QEMU_ARCH QEMU_ARCH_MIPS
#elif defined(TARGET_MOXIE)
#define QEMU_ARCH QEMU_ARCH_MOXIE
#elif defined(TARGET_NIOS2)
#define QEMU_ARCH QEMU_ARCH_NIOS2
#elif defined(TARGET_OPENRISC)
#define QEMU_ARCH QEMU_ARCH_OPENRISC
#elif defined(TARGET_PPC)
#define QEMU_ARCH QEMU_ARCH_PPC
#elif defined(TARGET_RISCV)
#define QEMU_ARCH QEMU_ARCH_RISCV
#elif defined(TARGET_S390X)
#define QEMU_ARCH QEMU_ARCH_S390X
#elif defined(TARGET_SH4)
#define QEMU_ARCH QEMU_ARCH_SH4
#elif defined(TARGET_SPARC)
#define QEMU_ARCH QEMU_ARCH_SPARC
#elif defined(TARGET_TRICORE)
#define QEMU_ARCH QEMU_ARCH_TRICORE
#elif defined(TARGET_UNICORE32)
#define QEMU_ARCH QEMU_ARCH_UNICORE32
#elif defined(TARGET_XTENSA)
#define QEMU_ARCH QEMU_ARCH_XTENSA
#elif defined(TARGET_UNICORE32)
#define QEMU_ARCH QEMU_ARCH_UNICORE32
#elif defined(TARGET_TRICORE)
#define QEMU_ARCH QEMU_ARCH_TRICORE
#endif
const uint32_t arch_type = QEMU_ARCH;
static struct defconfig_file {
const char *filename;
/* Indicates it is an user config file (disabled by -no-user-config) */
bool userconfig;
} default_config_files[] = {
{ CONFIG_QEMU_CONFDIR "/qemu.conf", true },
{ NULL }, /* end of list */
};
int qemu_read_default_config_files(bool userconfig)
{
int ret;
struct defconfig_file *f;
for (f = default_config_files; f->filename; f++) {
if (!userconfig && f->userconfig) {
continue;
}
ret = qemu_read_config_file(f->filename);
if (ret < 0 && ret != -ENOENT) {
return ret;
}
}
return 0;
}
struct soundhw {
const char *name;
const char *descr;
int enabled;
int isa;
union {
int (*init_isa) (ISABus *bus);
int (*init_pci) (PCIBus *bus);
} init;
};
static struct soundhw soundhw[9];
static int soundhw_count;
void isa_register_soundhw(const char *name, const char *descr,
int (*init_isa)(ISABus *bus))
{
assert(soundhw_count < ARRAY_SIZE(soundhw) - 1);
soundhw[soundhw_count].name = name;
soundhw[soundhw_count].descr = descr;
soundhw[soundhw_count].isa = 1;
soundhw[soundhw_count].init.init_isa = init_isa;
soundhw_count++;
}
void pci_register_soundhw(const char *name, const char *descr,
int (*init_pci)(PCIBus *bus))
{
assert(soundhw_count < ARRAY_SIZE(soundhw) - 1);
soundhw[soundhw_count].name = name;
soundhw[soundhw_count].descr = descr;
soundhw[soundhw_count].isa = 0;
soundhw[soundhw_count].init.init_pci = init_pci;
soundhw_count++;
}
void select_soundhw(const char *optarg)
{
struct soundhw *c;
if (is_help_option(optarg)) {
show_valid_cards:
if (soundhw_count) {
printf("Valid sound card names (comma separated):\n");
for (c = soundhw; c->name; ++c) {
printf ("%-11s %s\n", c->name, c->descr);
}
printf("\n-soundhw all will enable all of the above\n");
} else {
printf("Machine has no user-selectable audio hardware "
"(it may or may not have always-present audio hardware).\n");
}
exit(!is_help_option(optarg));
}
else {
size_t l;
const char *p;
char *e;
int bad_card = 0;
if (!strcmp(optarg, "all")) {
for (c = soundhw; c->name; ++c) {
c->enabled = 1;
}
return;
}
p = optarg;
while (*p) {
e = strchr(p, ',');
l = !e ? strlen(p) : (size_t) (e - p);
for (c = soundhw; c->name; ++c) {
if (!strncmp(c->name, p, l) && !c->name[l]) {
c->enabled = 1;
break;
}
}
if (!c->name) {
if (l > 80) {
error_report("Unknown sound card name (too big to show)");
}
else {
error_report("Unknown sound card name `%.*s'",
(int) l, p);
}
bad_card = 1;
}
p += l + (e != NULL);
}
if (bad_card) {
goto show_valid_cards;
}
}
}
void audio_init(void)
{
struct soundhw *c;
ISABus *isa_bus = (ISABus *) object_resolve_path_type("", TYPE_ISA_BUS, NULL);
PCIBus *pci_bus = (PCIBus *) object_resolve_path_type("", TYPE_PCI_BUS, NULL);
for (c = soundhw; c->name; ++c) {
if (c->enabled) {
if (c->isa) {
if (!isa_bus) {
error_report("ISA bus not available for %s", c->name);
exit(1);
}
c->init.init_isa(isa_bus);
} else {
if (!pci_bus) {
error_report("PCI bus not available for %s", c->name);
exit(1);
}
c->init.init_pci(pci_bus);
}
}
}
}
int qemu_uuid_parse(const char *str, uint8_t *uuid)
{
int ret;
if (strlen(str) != 36) {
return -1;
}
ret = sscanf(str, UUID_FMT, &uuid[0], &uuid[1], &uuid[2], &uuid[3],
&uuid[4], &uuid[5], &uuid[6], &uuid[7], &uuid[8], &uuid[9],
&uuid[10], &uuid[11], &uuid[12], &uuid[13], &uuid[14],
&uuid[15]);
if (ret != 16) {
return -1;
}
return 0;
}
void do_acpitable_option(const QemuOpts *opts)
{
#ifdef TARGET_I386
Error *err = NULL;
acpi_table_add(opts, &err);
if (err) {
error_reportf_err(err, "Wrong acpi table provided: ");
exit(1);
}
#endif
}
void do_smbios_option(QemuOpts *opts)
{
#ifdef TARGET_I386
smbios_entry_add(opts);
#endif
}
void cpudef_init(void)
{
#if defined(cpudef_setup)
cpudef_setup(); /* parse cpu definitions in target config file */
#endif
}
int kvm_available(void)
{
#ifdef CONFIG_KVM
@@ -112,8 +302,7 @@ TargetInfo *qmp_query_target(Error **errp)
{
TargetInfo *info = g_malloc0(sizeof(*info));
info->arch = qapi_enum_parse(&SysEmuTarget_lookup, TARGET_NAME, -1,
&error_abort);
info->arch = g_strdup(TARGET_NAME);
return info;
}

379
async.c Normal file
View File

@@ -0,0 +1,379 @@
/*
* QEMU System Emulator
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu-common.h"
#include "block/aio.h"
#include "block/thread-pool.h"
#include "qemu/main-loop.h"
#include "qemu/atomic.h"
/***********************************************************/
/* bottom halves (can be seen as timers which expire ASAP) */
struct QEMUBH {
AioContext *ctx;
QEMUBHFunc *cb;
void *opaque;
QEMUBH *next;
bool scheduled;
bool idle;
bool deleted;
};
QEMUBH *aio_bh_new(AioContext *ctx, QEMUBHFunc *cb, void *opaque)
{
QEMUBH *bh;
bh = g_new(QEMUBH, 1);
*bh = (QEMUBH){
.ctx = ctx,
.cb = cb,
.opaque = opaque,
};
qemu_mutex_lock(&ctx->bh_lock);
bh->next = ctx->first_bh;
/* Make sure that the members are ready before putting bh into list */
smp_wmb();
ctx->first_bh = bh;
qemu_mutex_unlock(&ctx->bh_lock);
return bh;
}
void aio_bh_call(QEMUBH *bh)
{
bh->cb(bh->opaque);
}
/* Multiple occurrences of aio_bh_poll cannot be called concurrently */
int aio_bh_poll(AioContext *ctx)
{
QEMUBH *bh, **bhp, *next;
int ret;
ctx->walking_bh++;
ret = 0;
for (bh = ctx->first_bh; bh; bh = next) {
/* Make sure that fetching bh happens before accessing its members */
smp_read_barrier_depends();
next = bh->next;
/* The atomic_xchg is paired with the one in qemu_bh_schedule. The
* implicit memory barrier ensures that the callback sees all writes
* done by the scheduling thread. It also ensures that the scheduling
* thread sees the zero before bh->cb has run, and thus will call
* aio_notify again if necessary.
*/
if (!bh->deleted && atomic_xchg(&bh->scheduled, 0)) {
/* Idle BHs and the notify BH don't count as progress */
if (!bh->idle && bh != ctx->notify_dummy_bh) {
ret = 1;
}
bh->idle = 0;
aio_bh_call(bh);
}
}
ctx->walking_bh--;
/* remove deleted bhs */
if (!ctx->walking_bh) {
qemu_mutex_lock(&ctx->bh_lock);
bhp = &ctx->first_bh;
while (*bhp) {
bh = *bhp;
if (bh->deleted) {
*bhp = bh->next;
g_free(bh);
} else {
bhp = &bh->next;
}
}
qemu_mutex_unlock(&ctx->bh_lock);
}
return ret;
}
void qemu_bh_schedule_idle(QEMUBH *bh)
{
bh->idle = 1;
/* Make sure that idle & any writes needed by the callback are done
* before the locations are read in the aio_bh_poll.
*/
atomic_mb_set(&bh->scheduled, 1);
}
void qemu_bh_schedule(QEMUBH *bh)
{
AioContext *ctx;
ctx = bh->ctx;
bh->idle = 0;
/* The memory barrier implicit in atomic_xchg makes sure that:
* 1. idle & any writes needed by the callback are done before the
* locations are read in the aio_bh_poll.
* 2. ctx is loaded before scheduled is set and the callback has a chance
* to execute.
*/
if (atomic_xchg(&bh->scheduled, 1) == 0) {
aio_notify(ctx);
}
}
/* This func is async.
*/
void qemu_bh_cancel(QEMUBH *bh)
{
bh->scheduled = 0;
}
/* This func is async.The bottom half will do the delete action at the finial
* end.
*/
void qemu_bh_delete(QEMUBH *bh)
{
bh->scheduled = 0;
bh->deleted = 1;
}
int64_t
aio_compute_timeout(AioContext *ctx)
{
int64_t deadline;
int timeout = -1;
QEMUBH *bh;
for (bh = ctx->first_bh; bh; bh = bh->next) {
if (!bh->deleted && bh->scheduled) {
if (bh->idle) {
/* idle bottom halves will be polled at least
* every 10ms */
timeout = 10000000;
} else {
/* non-idle bottom halves will be executed
* immediately */
return 0;
}
}
}
deadline = timerlistgroup_deadline_ns(&ctx->tlg);
if (deadline == 0) {
return 0;
} else {
return qemu_soonest_timeout(timeout, deadline);
}
}
static gboolean
aio_ctx_prepare(GSource *source, gint *timeout)
{
AioContext *ctx = (AioContext *) source;
atomic_or(&ctx->notify_me, 1);
/* We assume there is no timeout already supplied */
*timeout = qemu_timeout_ns_to_ms(aio_compute_timeout(ctx));
if (aio_prepare(ctx)) {
*timeout = 0;
}
return *timeout == 0;
}
static gboolean
aio_ctx_check(GSource *source)
{
AioContext *ctx = (AioContext *) source;
QEMUBH *bh;
atomic_and(&ctx->notify_me, ~1);
aio_notify_accept(ctx);
for (bh = ctx->first_bh; bh; bh = bh->next) {
if (!bh->deleted && bh->scheduled) {
return true;
}
}
return aio_pending(ctx) || (timerlistgroup_deadline_ns(&ctx->tlg) == 0);
}
static gboolean
aio_ctx_dispatch(GSource *source,
GSourceFunc callback,
gpointer user_data)
{
AioContext *ctx = (AioContext *) source;
assert(callback == NULL);
aio_dispatch(ctx);
return true;
}
static void
aio_ctx_finalize(GSource *source)
{
AioContext *ctx = (AioContext *) source;
qemu_bh_delete(ctx->notify_dummy_bh);
thread_pool_free(ctx->thread_pool);
qemu_mutex_lock(&ctx->bh_lock);
while (ctx->first_bh) {
QEMUBH *next = ctx->first_bh->next;
/* qemu_bh_delete() must have been called on BHs in this AioContext */
assert(ctx->first_bh->deleted);
g_free(ctx->first_bh);
ctx->first_bh = next;
}
qemu_mutex_unlock(&ctx->bh_lock);
aio_set_event_notifier(ctx, &ctx->notifier, false, NULL);
event_notifier_cleanup(&ctx->notifier);
rfifolock_destroy(&ctx->lock);
qemu_mutex_destroy(&ctx->bh_lock);
timerlistgroup_deinit(&ctx->tlg);
}
static GSourceFuncs aio_source_funcs = {
aio_ctx_prepare,
aio_ctx_check,
aio_ctx_dispatch,
aio_ctx_finalize
};
GSource *aio_get_g_source(AioContext *ctx)
{
g_source_ref(&ctx->source);
return &ctx->source;
}
ThreadPool *aio_get_thread_pool(AioContext *ctx)
{
if (!ctx->thread_pool) {
ctx->thread_pool = thread_pool_new(ctx);
}
return ctx->thread_pool;
}
void aio_notify(AioContext *ctx)
{
/* Write e.g. bh->scheduled before reading ctx->notify_me. Pairs
* with atomic_or in aio_ctx_prepare or atomic_add in aio_poll.
*/
smp_mb();
if (ctx->notify_me) {
event_notifier_set(&ctx->notifier);
atomic_mb_set(&ctx->notified, true);
}
}
void aio_notify_accept(AioContext *ctx)
{
if (atomic_xchg(&ctx->notified, false)) {
event_notifier_test_and_clear(&ctx->notifier);
}
}
static void aio_timerlist_notify(void *opaque)
{
aio_notify(opaque);
}
static void aio_rfifolock_cb(void *opaque)
{
AioContext *ctx = opaque;
/* Kick owner thread in case they are blocked in aio_poll() */
qemu_bh_schedule(ctx->notify_dummy_bh);
}
static void notify_dummy_bh(void *opaque)
{
/* Do nothing, we were invoked just to force the event loop to iterate */
}
static void event_notifier_dummy_cb(EventNotifier *e)
{
}
AioContext *aio_context_new(Error **errp)
{
int ret;
AioContext *ctx;
Error *local_err = NULL;
ctx = (AioContext *) g_source_new(&aio_source_funcs, sizeof(AioContext));
aio_context_setup(ctx, &local_err);
if (local_err) {
error_propagate(errp, local_err);
goto fail;
}
ret = event_notifier_init(&ctx->notifier, false);
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to initialize event notifier");
goto fail;
}
g_source_set_can_recurse(&ctx->source, true);
aio_set_event_notifier(ctx, &ctx->notifier,
false,
(EventNotifierHandler *)
event_notifier_dummy_cb);
ctx->thread_pool = NULL;
qemu_mutex_init(&ctx->bh_lock);
rfifolock_init(&ctx->lock, aio_rfifolock_cb, ctx);
timerlistgroup_init(&ctx->tlg, aio_timerlist_notify, ctx);
ctx->notify_dummy_bh = aio_bh_new(ctx, notify_dummy_bh, NULL);
return ctx;
fail:
g_source_destroy(&ctx->source);
return NULL;
}
void aio_context_ref(AioContext *ctx)
{
g_source_ref(&ctx->source);
}
void aio_context_unref(AioContext *ctx)
{
g_source_unref(&ctx->source);
}
void aio_context_acquire(AioContext *ctx)
{
rfifolock_lock(&ctx->lock);
}
void aio_context_release(AioContext *ctx)
{
rfifolock_unlock(&ctx->lock);
}

View File

@@ -1,31 +1,13 @@
common-obj-y = audio.o audio_legacy.o noaudio.o wavaudio.o mixeng.o
common-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
common-obj-$(CONFIG_SDL) += sdlaudio.o
common-obj-$(CONFIG_OSS) += ossaudio.o
common-obj-$(CONFIG_SPICE) += spiceaudio.o
common-obj-$(CONFIG_AUDIO_COREAUDIO) += coreaudio.o
common-obj-$(CONFIG_AUDIO_DSOUND) += dsoundaudio.o
common-obj-$(CONFIG_COREAUDIO) += coreaudio.o
common-obj-$(CONFIG_ALSA) += alsaaudio.o
common-obj-$(CONFIG_DSOUND) += dsoundaudio.o
common-obj-$(CONFIG_PA) += paaudio.o
common-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
common-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o
common-obj-y += wavcapture.o
coreaudio.o-libs := $(COREAUDIO_LIBS)
dsoundaudio.o-libs := $(DSOUND_LIBS)
# alsa module
common-obj-$(CONFIG_AUDIO_ALSA) += alsa.mo
alsa.mo-objs = alsaaudio.o
alsa.mo-libs := $(ALSA_LIBS)
# oss module
common-obj-$(CONFIG_AUDIO_OSS) += oss.mo
oss.mo-objs = ossaudio.o
oss.mo-libs := $(OSS_LIBS)
# pulseaudio module
common-obj-$(CONFIG_AUDIO_PA) += pa.mo
pa.mo-objs = paaudio.o
pa.mo-libs := $(PULSE_LIBS)
# sdl module
common-obj-$(CONFIG_AUDIO_SDL) += sdl.mo
sdl.mo-objs = sdlaudio.o
sdl.mo-cflags := $(SDL_CFLAGS)
sdl.mo-libs := $(SDL_LIBS)
sdlaudio.o-cflags := $(SDL_CFLAGS)

View File

@@ -21,22 +21,42 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <alsa/asoundlib.h>
#include "qemu-common.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
#include "audio.h"
#include "trace.h"
#if QEMU_GNUC_PREREQ(4, 3)
#pragma GCC diagnostic ignored "-Waddress"
#endif
#define AUDIO_CAP "alsa"
#include "audio_int.h"
typedef struct ALSAConf {
int size_in_usec_in;
int size_in_usec_out;
const char *pcm_name_in;
const char *pcm_name_out;
unsigned int buffer_size_in;
unsigned int period_size_in;
unsigned int buffer_size_out;
unsigned int period_size_out;
unsigned int threshold;
int buffer_size_in_overridden;
int period_size_in_overridden;
int buffer_size_out_overridden;
int period_size_out_overridden;
} ALSAConf;
struct pollhlp {
snd_pcm_t *handle;
struct pollfd *pfds;
ALSAConf *conf;
int count;
int mask;
};
@@ -48,7 +68,6 @@ typedef struct ALSAVoiceOut {
void *pcm_buf;
snd_pcm_t *handle;
struct pollhlp pollhlp;
Audiodev *dev;
} ALSAVoiceOut;
typedef struct ALSAVoiceIn {
@@ -56,18 +75,21 @@ typedef struct ALSAVoiceIn {
snd_pcm_t *handle;
void *pcm_buf;
struct pollhlp pollhlp;
Audiodev *dev;
} ALSAVoiceIn;
struct alsa_params_req {
int freq;
snd_pcm_format_t fmt;
int nchannels;
int size_in_usec;
int override_mask;
unsigned int buffer_size;
unsigned int period_size;
};
struct alsa_params_obt {
int freq;
AudioFormat fmt;
audfmt_e fmt;
int endianness;
int nchannels;
snd_pcm_uframes_t samples;
@@ -274,16 +296,16 @@ static int alsa_write (SWVoiceOut *sw, void *buf, int len)
return audio_pcm_sw_write (sw, buf, len);
}
static snd_pcm_format_t aud_to_alsafmt (AudioFormat fmt, int endianness)
static snd_pcm_format_t aud_to_alsafmt (audfmt_e fmt, int endianness)
{
switch (fmt) {
case AUDIO_FORMAT_S8:
case AUD_FMT_S8:
return SND_PCM_FORMAT_S8;
case AUDIO_FORMAT_U8:
case AUD_FMT_U8:
return SND_PCM_FORMAT_U8;
case AUDIO_FORMAT_S16:
case AUD_FMT_S16:
if (endianness) {
return SND_PCM_FORMAT_S16_BE;
}
@@ -291,7 +313,7 @@ static snd_pcm_format_t aud_to_alsafmt (AudioFormat fmt, int endianness)
return SND_PCM_FORMAT_S16_LE;
}
case AUDIO_FORMAT_U16:
case AUD_FMT_U16:
if (endianness) {
return SND_PCM_FORMAT_U16_BE;
}
@@ -299,7 +321,7 @@ static snd_pcm_format_t aud_to_alsafmt (AudioFormat fmt, int endianness)
return SND_PCM_FORMAT_U16_LE;
}
case AUDIO_FORMAT_S32:
case AUD_FMT_S32:
if (endianness) {
return SND_PCM_FORMAT_S32_BE;
}
@@ -307,7 +329,7 @@ static snd_pcm_format_t aud_to_alsafmt (AudioFormat fmt, int endianness)
return SND_PCM_FORMAT_S32_LE;
}
case AUDIO_FORMAT_U32:
case AUD_FMT_U32:
if (endianness) {
return SND_PCM_FORMAT_U32_BE;
}
@@ -324,58 +346,58 @@ static snd_pcm_format_t aud_to_alsafmt (AudioFormat fmt, int endianness)
}
}
static int alsa_to_audfmt (snd_pcm_format_t alsafmt, AudioFormat *fmt,
static int alsa_to_audfmt (snd_pcm_format_t alsafmt, audfmt_e *fmt,
int *endianness)
{
switch (alsafmt) {
case SND_PCM_FORMAT_S8:
*endianness = 0;
*fmt = AUDIO_FORMAT_S8;
*fmt = AUD_FMT_S8;
break;
case SND_PCM_FORMAT_U8:
*endianness = 0;
*fmt = AUDIO_FORMAT_U8;
*fmt = AUD_FMT_U8;
break;
case SND_PCM_FORMAT_S16_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case SND_PCM_FORMAT_U16_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
case SND_PCM_FORMAT_S16_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case SND_PCM_FORMAT_U16_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
case SND_PCM_FORMAT_S32_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_S32;
*fmt = AUD_FMT_S32;
break;
case SND_PCM_FORMAT_U32_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_U32;
*fmt = AUD_FMT_U32;
break;
case SND_PCM_FORMAT_S32_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_S32;
*fmt = AUD_FMT_S32;
break;
case SND_PCM_FORMAT_U32_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_U32;
*fmt = AUD_FMT_U32;
break;
default:
@@ -388,18 +410,17 @@ static int alsa_to_audfmt (snd_pcm_format_t alsafmt, AudioFormat *fmt,
static void alsa_dump_info (struct alsa_params_req *req,
struct alsa_params_obt *obt,
snd_pcm_format_t obtfmt,
AudiodevAlsaPerDirectionOptions *apdo)
snd_pcm_format_t obtfmt)
{
dolog("parameter | requested value | obtained value\n");
dolog("format | %10d | %10d\n", req->fmt, obtfmt);
dolog("channels | %10d | %10d\n",
req->nchannels, obt->nchannels);
dolog("frequency | %10d | %10d\n", req->freq, obt->freq);
dolog("============================================\n");
dolog("requested: buffer len %" PRId32 " period len %" PRId32 "\n",
apdo->buffer_length, apdo->period_length);
dolog("obtained: samples %ld\n", obt->samples);
dolog ("parameter | requested value | obtained value\n");
dolog ("format | %10d | %10d\n", req->fmt, obtfmt);
dolog ("channels | %10d | %10d\n",
req->nchannels, obt->nchannels);
dolog ("frequency | %10d | %10d\n", req->freq, obt->freq);
dolog ("============================================\n");
dolog ("requested: buffer size %d period size %d\n",
req->buffer_size, req->period_size);
dolog ("obtained: samples %ld\n", obt->samples);
}
static void alsa_set_threshold (snd_pcm_t *handle, snd_pcm_uframes_t threshold)
@@ -432,23 +453,23 @@ static void alsa_set_threshold (snd_pcm_t *handle, snd_pcm_uframes_t threshold)
}
}
static int alsa_open(bool in, struct alsa_params_req *req,
struct alsa_params_obt *obt, snd_pcm_t **handlep,
Audiodev *dev)
static int alsa_open (int in, struct alsa_params_req *req,
struct alsa_params_obt *obt, snd_pcm_t **handlep,
ALSAConf *conf)
{
AudiodevAlsaOptions *aopts = &dev->u.alsa;
AudiodevAlsaPerDirectionOptions *apdo = in ? aopts->in : aopts->out;
snd_pcm_t *handle;
snd_pcm_hw_params_t *hw_params;
int err;
int size_in_usec;
unsigned int freq, nchannels;
const char *pcm_name = apdo->has_dev ? apdo->dev : "default";
const char *pcm_name = in ? conf->pcm_name_in : conf->pcm_name_out;
snd_pcm_uframes_t obt_buffer_size;
const char *typ = in ? "ADC" : "DAC";
snd_pcm_format_t obtfmt;
freq = req->freq;
nchannels = req->nchannels;
size_in_usec = req->size_in_usec;
snd_pcm_hw_params_alloca (&hw_params);
@@ -508,42 +529,79 @@ static int alsa_open(bool in, struct alsa_params_req *req,
goto err;
}
if (apdo->buffer_length) {
int dir = 0;
unsigned int btime = apdo->buffer_length;
if (req->buffer_size) {
unsigned long obt;
err = snd_pcm_hw_params_set_buffer_time_near(
handle, hw_params, &btime, &dir);
if (size_in_usec) {
int dir = 0;
unsigned int btime = req->buffer_size;
err = snd_pcm_hw_params_set_buffer_time_near (
handle,
hw_params,
&btime,
&dir
);
obt = btime;
}
else {
snd_pcm_uframes_t bsize = req->buffer_size;
err = snd_pcm_hw_params_set_buffer_size_near (
handle,
hw_params,
&bsize
);
obt = bsize;
}
if (err < 0) {
alsa_logerr2(err, typ, "Failed to set buffer time to %" PRId32 "\n",
apdo->buffer_length);
alsa_logerr2 (err, typ, "Failed to set buffer %s to %d\n",
size_in_usec ? "time" : "size", req->buffer_size);
goto err;
}
if (apdo->has_buffer_length && btime != apdo->buffer_length) {
dolog("Requested buffer time %" PRId32
" was rejected, using %u\n", apdo->buffer_length, btime);
}
if ((req->override_mask & 2) && (obt - req->buffer_size))
dolog ("Requested buffer %s %u was rejected, using %lu\n",
size_in_usec ? "time" : "size", req->buffer_size, obt);
}
if (apdo->period_length) {
int dir = 0;
unsigned int ptime = apdo->period_length;
if (req->period_size) {
unsigned long obt;
err = snd_pcm_hw_params_set_period_time_near(handle, hw_params, &ptime,
&dir);
if (size_in_usec) {
int dir = 0;
unsigned int ptime = req->period_size;
err = snd_pcm_hw_params_set_period_time_near (
handle,
hw_params,
&ptime,
&dir
);
obt = ptime;
}
else {
int dir = 0;
snd_pcm_uframes_t psize = req->period_size;
err = snd_pcm_hw_params_set_period_size_near (
handle,
hw_params,
&psize,
&dir
);
obt = psize;
}
if (err < 0) {
alsa_logerr2(err, typ, "Failed to set period time to %" PRId32 "\n",
apdo->period_length);
alsa_logerr2 (err, typ, "Failed to set period %s to %d\n",
size_in_usec ? "time" : "size", req->period_size);
goto err;
}
if (apdo->has_period_length && ptime != apdo->period_length) {
dolog("Requested period time %" PRId32 " was rejected, using %d\n",
apdo->period_length, ptime);
}
if (((req->override_mask & 1) && (obt - req->period_size)))
dolog ("Requested period %s %u was rejected, using %lu\n",
size_in_usec ? "time" : "size", req->period_size, obt);
}
err = snd_pcm_hw_params (handle, hw_params);
@@ -575,12 +633,30 @@ static int alsa_open(bool in, struct alsa_params_req *req,
goto err;
}
if (!in && aopts->has_threshold && aopts->threshold) {
struct audsettings as = { .freq = freq };
alsa_set_threshold(
handle,
audio_buffer_frames(qapi_AudiodevAlsaPerDirectionOptions_base(apdo),
&as, aopts->threshold));
if (!in && conf->threshold) {
snd_pcm_uframes_t threshold;
int bytes_per_sec;
bytes_per_sec = freq << (nchannels == 2);
switch (obt->fmt) {
case AUD_FMT_S8:
case AUD_FMT_U8:
break;
case AUD_FMT_S16:
case AUD_FMT_U16:
bytes_per_sec <<= 1;
break;
case AUD_FMT_S32:
case AUD_FMT_U32:
bytes_per_sec <<= 2;
break;
}
threshold = (conf->threshold * bytes_per_sec) / 1000;
alsa_set_threshold (handle, threshold);
}
obt->nchannels = nchannels;
@@ -593,11 +669,11 @@ static int alsa_open(bool in, struct alsa_params_req *req,
obt->nchannels != req->nchannels ||
obt->freq != req->freq) {
dolog ("Audio parameters for %s\n", typ);
alsa_dump_info(req, obt, obtfmt, apdo);
alsa_dump_info (req, obt, obtfmt);
}
#ifdef DEBUG
alsa_dump_info(req, obt, obtfmt, pdo);
alsa_dump_info (req, obt, obtfmt);
#endif
return 0;
@@ -723,13 +799,19 @@ static int alsa_init_out(HWVoiceOut *hw, struct audsettings *as,
struct alsa_params_obt obt;
snd_pcm_t *handle;
struct audsettings obt_as;
Audiodev *dev = drv_opaque;
ALSAConf *conf = drv_opaque;
req.fmt = aud_to_alsafmt (as->fmt, as->endianness);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.period_size = conf->period_size_out;
req.buffer_size = conf->buffer_size_out;
req.size_in_usec = conf->size_in_usec_out;
req.override_mask =
(conf->period_size_out_overridden ? 1 : 0) |
(conf->buffer_size_out_overridden ? 2 : 0);
if (alsa_open(0, &req, &obt, &handle, dev)) {
if (alsa_open (0, &req, &obt, &handle, conf)) {
return -1;
}
@@ -741,7 +823,7 @@ static int alsa_init_out(HWVoiceOut *hw, struct audsettings *as,
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = obt.samples;
alsa->pcm_buf = audio_calloc(__func__, obt.samples, 1 << hw->info.shift);
alsa->pcm_buf = audio_calloc (AUDIO_FUNC, obt.samples, 1 << hw->info.shift);
if (!alsa->pcm_buf) {
dolog ("Could not allocate DAC buffer (%d samples, each %d bytes)\n",
hw->samples, 1 << hw->info.shift);
@@ -750,7 +832,7 @@ static int alsa_init_out(HWVoiceOut *hw, struct audsettings *as,
}
alsa->handle = handle;
alsa->dev = dev;
alsa->pollhlp.conf = conf;
return 0;
}
@@ -790,12 +872,16 @@ static int alsa_voice_ctl (snd_pcm_t *handle, const char *typ, int ctl)
static int alsa_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
ALSAVoiceOut *alsa = (ALSAVoiceOut *) hw;
AudiodevAlsaPerDirectionOptions *apdo = alsa->dev->u.alsa.out;
switch (cmd) {
case VOICE_ENABLE:
{
bool poll_mode = apdo->try_poll;
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
ldebug ("enabling voice\n");
if (poll_mode && alsa_poll_out (hw)) {
@@ -824,13 +910,19 @@ static int alsa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
struct alsa_params_obt obt;
snd_pcm_t *handle;
struct audsettings obt_as;
Audiodev *dev = drv_opaque;
ALSAConf *conf = drv_opaque;
req.fmt = aud_to_alsafmt (as->fmt, as->endianness);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.period_size = conf->period_size_in;
req.buffer_size = conf->buffer_size_in;
req.size_in_usec = conf->size_in_usec_in;
req.override_mask =
(conf->period_size_in_overridden ? 1 : 0) |
(conf->buffer_size_in_overridden ? 2 : 0);
if (alsa_open(1, &req, &obt, &handle, dev)) {
if (alsa_open (1, &req, &obt, &handle, conf)) {
return -1;
}
@@ -842,7 +934,7 @@ static int alsa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = obt.samples;
alsa->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
alsa->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
if (!alsa->pcm_buf) {
dolog ("Could not allocate ADC buffer (%d samples, each %d bytes)\n",
hw->samples, 1 << hw->info.shift);
@@ -851,7 +943,7 @@ static int alsa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
}
alsa->handle = handle;
alsa->dev = dev;
alsa->pollhlp.conf = conf;
return 0;
}
@@ -993,12 +1085,16 @@ static int alsa_read (SWVoiceIn *sw, void *buf, int size)
static int alsa_ctl_in (HWVoiceIn *hw, int cmd, ...)
{
ALSAVoiceIn *alsa = (ALSAVoiceIn *) hw;
AudiodevAlsaPerDirectionOptions *apdo = alsa->dev->u.alsa.in;
switch (cmd) {
case VOICE_ENABLE:
{
bool poll_mode = apdo->try_poll;
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
ldebug ("enabling voice\n");
if (poll_mode && alsa_poll_in (hw)) {
@@ -1021,54 +1117,88 @@ static int alsa_ctl_in (HWVoiceIn *hw, int cmd, ...)
return -1;
}
static void alsa_init_per_direction(AudiodevAlsaPerDirectionOptions *apdo)
static ALSAConf glob_conf = {
.buffer_size_out = 4096,
.period_size_out = 1024,
.pcm_name_out = "default",
.pcm_name_in = "default",
};
static void *alsa_audio_init (void)
{
if (!apdo->has_try_poll) {
apdo->try_poll = true;
apdo->has_try_poll = true;
}
}
static void *alsa_audio_init(Audiodev *dev)
{
AudiodevAlsaOptions *aopts;
assert(dev->driver == AUDIODEV_DRIVER_ALSA);
aopts = &dev->u.alsa;
alsa_init_per_direction(aopts->in);
alsa_init_per_direction(aopts->out);
/*
* need to define them, as otherwise alsa produces no sound
* doesn't set has_* so alsa_open can identify it wasn't set by the user
*/
if (!dev->u.alsa.out->has_period_length) {
/* 1024 frames assuming 44100Hz */
dev->u.alsa.out->period_length = 1024 * 1000000 / 44100;
}
if (!dev->u.alsa.out->has_buffer_length) {
/* 4096 frames assuming 44100Hz */
dev->u.alsa.out->buffer_length = 4096ll * 1000000 / 44100;
}
/*
* OptsVisitor sets unspecified optional fields to zero, but do not depend
* on it...
*/
if (!dev->u.alsa.in->has_period_length) {
dev->u.alsa.in->period_length = 0;
}
if (!dev->u.alsa.in->has_buffer_length) {
dev->u.alsa.in->buffer_length = 0;
}
return dev;
ALSAConf *conf = g_malloc(sizeof(ALSAConf));
*conf = glob_conf;
return conf;
}
static void alsa_audio_fini (void *opaque)
{
g_free(opaque);
}
static struct audio_option alsa_options[] = {
{
.name = "DAC_SIZE_IN_USEC",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.size_in_usec_out,
.descr = "DAC period/buffer size in microseconds (otherwise in frames)"
},
{
.name = "DAC_PERIOD_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.period_size_out,
.descr = "DAC period size (0 to go with system default)",
.overriddenp = &glob_conf.period_size_out_overridden
},
{
.name = "DAC_BUFFER_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.buffer_size_out,
.descr = "DAC buffer size (0 to go with system default)",
.overriddenp = &glob_conf.buffer_size_out_overridden
},
{
.name = "ADC_SIZE_IN_USEC",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.size_in_usec_in,
.descr =
"ADC period/buffer size in microseconds (otherwise in frames)"
},
{
.name = "ADC_PERIOD_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.period_size_in,
.descr = "ADC period size (0 to go with system default)",
.overriddenp = &glob_conf.period_size_in_overridden
},
{
.name = "ADC_BUFFER_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.buffer_size_in,
.descr = "ADC buffer size (0 to go with system default)",
.overriddenp = &glob_conf.buffer_size_in_overridden
},
{
.name = "THRESHOLD",
.tag = AUD_OPT_INT,
.valp = &glob_conf.threshold,
.descr = "(undocumented)"
},
{
.name = "DAC_DEV",
.tag = AUD_OPT_STR,
.valp = &glob_conf.pcm_name_out,
.descr = "DAC device name (for instance dmix)"
},
{
.name = "ADC_DEV",
.tag = AUD_OPT_STR,
.valp = &glob_conf.pcm_name_in,
.descr = "ADC device name"
},
{ /* End of list */ }
};
static struct audio_pcm_ops alsa_pcm_ops = {
.init_out = alsa_init_out,
.fini_out = alsa_fini_out,
@@ -1083,9 +1213,10 @@ static struct audio_pcm_ops alsa_pcm_ops = {
.ctl_in = alsa_ctl_in,
};
static struct audio_driver alsa_audio_driver = {
struct audio_driver alsa_audio_driver = {
.name = "alsa",
.descr = "ALSA http://www.alsa-project.org",
.options = alsa_options,
.init = alsa_audio_init,
.fini = alsa_audio_fini,
.pcm_ops = &alsa_pcm_ops,
@@ -1095,9 +1226,3 @@ static struct audio_driver alsa_audio_driver = {
.voice_size_out = sizeof (ALSAVoiceOut),
.voice_size_in = sizeof (ALSAVoiceIn)
};
static void register_audio_alsa(void)
{
audio_driver_register(&alsa_audio_driver);
}
type_init(register_audio_alsa);

File diff suppressed because it is too large Load Diff

View File

@@ -21,36 +21,34 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef QEMU_AUDIO_H
#define QEMU_AUDIO_H
#include "qemu/queue.h"
#include "qapi/qapi-types-audio.h"
typedef void (*audio_callback_fn) (void *opaque, int avail);
typedef enum {
AUD_FMT_U8,
AUD_FMT_S8,
AUD_FMT_U16,
AUD_FMT_S16,
AUD_FMT_U32,
AUD_FMT_S32
} audfmt_e;
#ifdef HOST_WORDS_BIGENDIAN
#define AUDIO_HOST_ENDIANNESS 1
#else
#define AUDIO_HOST_ENDIANNESS 0
#endif
typedef struct audsettings {
struct audsettings {
int freq;
int nchannels;
AudioFormat fmt;
audfmt_e fmt;
int endianness;
} audsettings;
audsettings audiodev_to_audsettings(AudiodevPerDirectionOptions *pdo);
int audioformat_bytes_per_sample(AudioFormat fmt);
int audio_buffer_frames(AudiodevPerDirectionOptions *pdo,
audsettings *as, int def_usecs);
int audio_buffer_samples(AudiodevPerDirectionOptions *pdo,
audsettings *as, int def_usecs);
int audio_buffer_bytes(AudiodevPerDirectionOptions *pdo,
audsettings *as, int def_usecs);
};
typedef enum {
AUD_CNOTIFY_ENABLE,
@@ -90,6 +88,7 @@ typedef struct QEMUAudioTimeStamp {
void AUD_vlog (const char *cap, const char *fmt, va_list ap) GCC_FMT_ATTR(2, 0);
void AUD_log (const char *cap, const char *fmt, ...) GCC_FMT_ATTR(2, 3);
void AUD_help (void);
void AUD_register_card (const char *name, QEMUSoundCard *card);
void AUD_remove_card (QEMUSoundCard *card);
CaptureVoiceOut *AUD_add_capture (
@@ -163,16 +162,4 @@ static inline void *advance (void *p, int incr)
int wav_start_capture (CaptureState *s, const char *path, int freq,
int bits, int nchannels);
bool audio_is_cleaning_up(void);
void audio_cleanup(void);
void audio_sample_to_uint64(void *samples, int pos,
uint64_t *left, uint64_t *right);
void audio_sample_from_uint64(void *samples, int pos,
uint64_t left, uint64_t right);
void audio_parse_option(const char *opt);
void audio_init_audiodevs(void);
void audio_legacy_help(void);
#endif /* QEMU_AUDIO_H */
#endif /* audio.h */

View File

@@ -21,11 +21,10 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef QEMU_AUDIO_INT_H
#define QEMU_AUDIO_INT_H
#ifdef CONFIG_AUDIO_COREAUDIO
#ifdef CONFIG_COREAUDIO
#define FLOAT_MIXENG
/* #define RECIPROCAL */
#endif
@@ -33,6 +32,22 @@
struct audio_pcm_ops;
typedef enum {
AUD_OPT_INT,
AUD_OPT_FMT,
AUD_OPT_STR,
AUD_OPT_BOOL
} audio_option_tag_e;
struct audio_option {
const char *name;
audio_option_tag_e tag;
void *valp;
const char *descr;
int *overriddenp;
int overridden;
};
struct audio_callback {
void *opaque;
audio_callback_fn fn;
@@ -125,11 +140,11 @@ struct SWVoiceIn {
QLIST_ENTRY (SWVoiceIn) entries;
};
typedef struct audio_driver audio_driver;
struct audio_driver {
const char *name;
const char *descr;
void *(*init) (Audiodev *);
struct audio_option *options;
void *(*init) (void);
void (*fini) (void *);
struct audio_pcm_ops *pcm_ops;
int can_be_default;
@@ -138,7 +153,6 @@ struct audio_driver {
int voice_size_out;
int voice_size_in;
int ctl_caps;
QLIST_ENTRY(audio_driver) next;
};
struct audio_pcm_ops {
@@ -174,9 +188,8 @@ struct SWVoiceCap {
QLIST_ENTRY (SWVoiceCap) entries;
};
typedef struct AudioState {
struct AudioState {
struct audio_driver *drv;
Audiodev *dev;
void *drv_opaque;
QEMUTimer *ts;
@@ -187,16 +200,19 @@ typedef struct AudioState {
int nb_hw_voices_out;
int nb_hw_voices_in;
int vm_running;
int64_t period_ticks;
} AudioState;
};
extern struct audio_driver no_audio_driver;
extern struct audio_driver oss_audio_driver;
extern struct audio_driver sdl_audio_driver;
extern struct audio_driver wav_audio_driver;
extern struct audio_driver alsa_audio_driver;
extern struct audio_driver coreaudio_audio_driver;
extern struct audio_driver dsound_audio_driver;
extern struct audio_driver pa_audio_driver;
extern struct audio_driver spice_audio_driver;
extern const struct mixeng_volume nominal_volume;
extern const char *audio_prio_list[];
void audio_driver_register(audio_driver *drv);
audio_driver *audio_driver_lookup(const char *name);
void audio_pcm_init_info (struct audio_pcm_info *info, struct audsettings *as);
void audio_pcm_info_clear_buf (struct audio_pcm_info *info, void *buf, int len);
@@ -235,18 +251,10 @@ static inline int audio_ring_dist (int dst, int src, int len)
#define AUDIO_STRINGIFY_(n) #n
#define AUDIO_STRINGIFY(n) AUDIO_STRINGIFY_(n)
typedef struct AudiodevListEntry {
Audiodev *dev;
QSIMPLEQ_ENTRY(AudiodevListEntry) next;
} AudiodevListEntry;
#if defined _MSC_VER || defined __GNUC__
#define AUDIO_FUNC __FUNCTION__
#else
#define AUDIO_FUNC __FILE__ ":" AUDIO_STRINGIFY (__LINE__)
#endif
typedef QSIMPLEQ_HEAD(, AudiodevListEntry) AudiodevListHead;
AudiodevListHead audio_handle_legacy_opts(void);
void audio_free_audiodev_list(AudiodevListHead *head);
void audio_create_pdos(Audiodev *dev);
AudiodevPerDirectionOptions *audio_get_pdo_in(Audiodev *dev);
AudiodevPerDirectionOptions *audio_get_pdo_out(Audiodev *dev);
#endif /* QEMU_AUDIO_INT_H */
#endif /* audio_int.h */

View File

@@ -1,549 +0,0 @@
/*
* QEMU Audio subsystem: legacy configuration handling
*
* Copyright (c) 2015-2019 Zoltán Kővágó <DirtY.iCE.hu@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "audio.h"
#include "audio_int.h"
#include "qemu/cutils.h"
#include "qemu/timer.h"
#include "qapi/error.h"
#include "qapi/qapi-visit-audio.h"
#include "qapi/visitor-impl.h"
#define AUDIO_CAP "audio-legacy"
#include "audio_int.h"
static uint32_t toui32(const char *str)
{
unsigned long long ret;
if (parse_uint_full(str, &ret, 10) || ret > UINT32_MAX) {
dolog("Invalid integer value `%s'\n", str);
exit(1);
}
return ret;
}
/* helper functions to convert env variables */
static void get_bool(const char *env, bool *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
*dst = toui32(val) != 0;
*has_dst = true;
}
}
static void get_int(const char *env, uint32_t *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
*dst = toui32(val);
*has_dst = true;
}
}
static void get_str(const char *env, char **dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
if (*has_dst) {
g_free(*dst);
}
*dst = g_strdup(val);
*has_dst = true;
}
}
static void get_fmt(const char *env, AudioFormat *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
size_t i;
for (i = 0; AudioFormat_lookup.size; ++i) {
if (strcasecmp(val, AudioFormat_lookup.array[i]) == 0) {
*dst = i;
*has_dst = true;
return;
}
}
dolog("Invalid audio format `%s'\n", val);
exit(1);
}
}
static void get_millis_to_usecs(const char *env, uint32_t *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
*dst = toui32(val) * 1000;
*has_dst = true;
}
}
static uint32_t frames_to_usecs(uint32_t frames,
AudiodevPerDirectionOptions *pdo)
{
uint32_t freq = pdo->has_frequency ? pdo->frequency : 44100;
return (frames * 1000000 + freq / 2) / freq;
}
static void get_frames_to_usecs(const char *env, uint32_t *dst, bool *has_dst,
AudiodevPerDirectionOptions *pdo)
{
const char *val = getenv(env);
if (val) {
*dst = frames_to_usecs(toui32(val), pdo);
*has_dst = true;
}
}
static uint32_t samples_to_usecs(uint32_t samples,
AudiodevPerDirectionOptions *pdo)
{
uint32_t channels = pdo->has_channels ? pdo->channels : 2;
return frames_to_usecs(samples / channels, pdo);
}
static void get_samples_to_usecs(const char *env, uint32_t *dst, bool *has_dst,
AudiodevPerDirectionOptions *pdo)
{
const char *val = getenv(env);
if (val) {
*dst = samples_to_usecs(toui32(val), pdo);
*has_dst = true;
}
}
static uint32_t bytes_to_usecs(uint32_t bytes, AudiodevPerDirectionOptions *pdo)
{
AudioFormat fmt = pdo->has_format ? pdo->format : AUDIO_FORMAT_S16;
uint32_t bytes_per_sample = audioformat_bytes_per_sample(fmt);
return samples_to_usecs(bytes / bytes_per_sample, pdo);
}
static void get_bytes_to_usecs(const char *env, uint32_t *dst, bool *has_dst,
AudiodevPerDirectionOptions *pdo)
{
const char *val = getenv(env);
if (val) {
*dst = bytes_to_usecs(toui32(val), pdo);
*has_dst = true;
}
}
/* backend specific functions */
/* ALSA */
static void handle_alsa_per_direction(
AudiodevAlsaPerDirectionOptions *apdo, const char *prefix)
{
char buf[64];
size_t len = strlen(prefix);
bool size_in_usecs = false;
bool dummy;
memcpy(buf, prefix, len);
strcpy(buf + len, "TRY_POLL");
get_bool(buf, &apdo->try_poll, &apdo->has_try_poll);
strcpy(buf + len, "DEV");
get_str(buf, &apdo->dev, &apdo->has_dev);
strcpy(buf + len, "SIZE_IN_USEC");
get_bool(buf, &size_in_usecs, &dummy);
strcpy(buf + len, "PERIOD_SIZE");
get_int(buf, &apdo->period_length, &apdo->has_period_length);
if (apdo->has_period_length && !size_in_usecs) {
apdo->period_length = frames_to_usecs(
apdo->period_length,
qapi_AudiodevAlsaPerDirectionOptions_base(apdo));
}
strcpy(buf + len, "BUFFER_SIZE");
get_int(buf, &apdo->buffer_length, &apdo->has_buffer_length);
if (apdo->has_buffer_length && !size_in_usecs) {
apdo->buffer_length = frames_to_usecs(
apdo->buffer_length,
qapi_AudiodevAlsaPerDirectionOptions_base(apdo));
}
}
static void handle_alsa(Audiodev *dev)
{
AudiodevAlsaOptions *aopt = &dev->u.alsa;
handle_alsa_per_direction(aopt->in, "QEMU_ALSA_ADC_");
handle_alsa_per_direction(aopt->out, "QEMU_ALSA_DAC_");
get_millis_to_usecs("QEMU_ALSA_THRESHOLD",
&aopt->threshold, &aopt->has_threshold);
}
/* coreaudio */
static void handle_coreaudio(Audiodev *dev)
{
get_frames_to_usecs(
"QEMU_COREAUDIO_BUFFER_SIZE",
&dev->u.coreaudio.out->buffer_length,
&dev->u.coreaudio.out->has_buffer_length,
qapi_AudiodevCoreaudioPerDirectionOptions_base(dev->u.coreaudio.out));
get_int("QEMU_COREAUDIO_BUFFER_COUNT",
&dev->u.coreaudio.out->buffer_count,
&dev->u.coreaudio.out->has_buffer_count);
}
/* dsound */
static void handle_dsound(Audiodev *dev)
{
get_millis_to_usecs("QEMU_DSOUND_LATENCY_MILLIS",
&dev->u.dsound.latency, &dev->u.dsound.has_latency);
get_bytes_to_usecs("QEMU_DSOUND_BUFSIZE_OUT",
&dev->u.dsound.out->buffer_length,
&dev->u.dsound.out->has_buffer_length,
dev->u.dsound.out);
get_bytes_to_usecs("QEMU_DSOUND_BUFSIZE_IN",
&dev->u.dsound.in->buffer_length,
&dev->u.dsound.in->has_buffer_length,
dev->u.dsound.in);
}
/* OSS */
static void handle_oss_per_direction(
AudiodevOssPerDirectionOptions *opdo, const char *try_poll_env,
const char *dev_env)
{
get_bool(try_poll_env, &opdo->try_poll, &opdo->has_try_poll);
get_str(dev_env, &opdo->dev, &opdo->has_dev);
get_bytes_to_usecs("QEMU_OSS_FRAGSIZE",
&opdo->buffer_length, &opdo->has_buffer_length,
qapi_AudiodevOssPerDirectionOptions_base(opdo));
get_int("QEMU_OSS_NFRAGS", &opdo->buffer_count,
&opdo->has_buffer_count);
}
static void handle_oss(Audiodev *dev)
{
AudiodevOssOptions *oopt = &dev->u.oss;
handle_oss_per_direction(oopt->in, "QEMU_AUDIO_ADC_TRY_POLL",
"QEMU_OSS_ADC_DEV");
handle_oss_per_direction(oopt->out, "QEMU_AUDIO_DAC_TRY_POLL",
"QEMU_OSS_DAC_DEV");
get_bool("QEMU_OSS_MMAP", &oopt->try_mmap, &oopt->has_try_mmap);
get_bool("QEMU_OSS_EXCLUSIVE", &oopt->exclusive, &oopt->has_exclusive);
get_int("QEMU_OSS_POLICY", &oopt->dsp_policy, &oopt->has_dsp_policy);
}
/* pulseaudio */
static void handle_pa_per_direction(
AudiodevPaPerDirectionOptions *ppdo, const char *env)
{
get_str(env, &ppdo->name, &ppdo->has_name);
}
static void handle_pa(Audiodev *dev)
{
handle_pa_per_direction(dev->u.pa.in, "QEMU_PA_SOURCE");
handle_pa_per_direction(dev->u.pa.out, "QEMU_PA_SINK");
get_samples_to_usecs(
"QEMU_PA_SAMPLES", &dev->u.pa.in->buffer_length,
&dev->u.pa.in->has_buffer_length,
qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.in));
get_samples_to_usecs(
"QEMU_PA_SAMPLES", &dev->u.pa.out->buffer_length,
&dev->u.pa.out->has_buffer_length,
qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.out));
get_str("QEMU_PA_SERVER", &dev->u.pa.server, &dev->u.pa.has_server);
}
/* SDL */
static void handle_sdl(Audiodev *dev)
{
/* SDL is output only */
get_samples_to_usecs("QEMU_SDL_SAMPLES", &dev->u.sdl.out->buffer_length,
&dev->u.sdl.out->has_buffer_length, dev->u.sdl.out);
}
/* wav */
static void handle_wav(Audiodev *dev)
{
get_int("QEMU_WAV_FREQUENCY",
&dev->u.wav.out->frequency, &dev->u.wav.out->has_frequency);
get_fmt("QEMU_WAV_FORMAT", &dev->u.wav.out->format,
&dev->u.wav.out->has_format);
get_int("QEMU_WAV_DAC_FIXED_CHANNELS",
&dev->u.wav.out->channels, &dev->u.wav.out->has_channels);
get_str("QEMU_WAV_PATH", &dev->u.wav.path, &dev->u.wav.has_path);
}
/* general */
static void handle_per_direction(
AudiodevPerDirectionOptions *pdo, const char *prefix)
{
char buf[64];
size_t len = strlen(prefix);
memcpy(buf, prefix, len);
strcpy(buf + len, "FIXED_SETTINGS");
get_bool(buf, &pdo->fixed_settings, &pdo->has_fixed_settings);
strcpy(buf + len, "FIXED_FREQ");
get_int(buf, &pdo->frequency, &pdo->has_frequency);
strcpy(buf + len, "FIXED_FMT");
get_fmt(buf, &pdo->format, &pdo->has_format);
strcpy(buf + len, "FIXED_CHANNELS");
get_int(buf, &pdo->channels, &pdo->has_channels);
strcpy(buf + len, "VOICES");
get_int(buf, &pdo->voices, &pdo->has_voices);
}
static AudiodevListEntry *legacy_opt(const char *drvname)
{
AudiodevListEntry *e = g_malloc0(sizeof(AudiodevListEntry));
e->dev = g_malloc0(sizeof(Audiodev));
e->dev->id = g_strdup(drvname);
e->dev->driver = qapi_enum_parse(
&AudiodevDriver_lookup, drvname, -1, &error_abort);
audio_create_pdos(e->dev);
handle_per_direction(audio_get_pdo_in(e->dev), "QEMU_AUDIO_ADC_");
handle_per_direction(audio_get_pdo_out(e->dev), "QEMU_AUDIO_DAC_");
/* Original description: Timer period in HZ (0 - use lowest possible) */
get_int("QEMU_AUDIO_TIMER_PERIOD",
&e->dev->timer_period, &e->dev->has_timer_period);
if (e->dev->has_timer_period && e->dev->timer_period) {
e->dev->timer_period = NANOSECONDS_PER_SECOND / 1000 /
e->dev->timer_period;
}
switch (e->dev->driver) {
case AUDIODEV_DRIVER_ALSA:
handle_alsa(e->dev);
break;
case AUDIODEV_DRIVER_COREAUDIO:
handle_coreaudio(e->dev);
break;
case AUDIODEV_DRIVER_DSOUND:
handle_dsound(e->dev);
break;
case AUDIODEV_DRIVER_OSS:
handle_oss(e->dev);
break;
case AUDIODEV_DRIVER_PA:
handle_pa(e->dev);
break;
case AUDIODEV_DRIVER_SDL:
handle_sdl(e->dev);
break;
case AUDIODEV_DRIVER_WAV:
handle_wav(e->dev);
break;
default:
break;
}
return e;
}
AudiodevListHead audio_handle_legacy_opts(void)
{
const char *drvname = getenv("QEMU_AUDIO_DRV");
AudiodevListHead head = QSIMPLEQ_HEAD_INITIALIZER(head);
if (drvname) {
AudiodevListEntry *e;
audio_driver *driver = audio_driver_lookup(drvname);
if (!driver) {
dolog("Unknown audio driver `%s'\n", drvname);
exit(1);
}
e = legacy_opt(drvname);
QSIMPLEQ_INSERT_TAIL(&head, e, next);
} else {
for (int i = 0; audio_prio_list[i]; i++) {
audio_driver *driver = audio_driver_lookup(audio_prio_list[i]);
if (driver && driver->can_be_default) {
AudiodevListEntry *e = legacy_opt(driver->name);
QSIMPLEQ_INSERT_TAIL(&head, e, next);
}
}
if (QSIMPLEQ_EMPTY(&head)) {
dolog("Internal error: no default audio driver available\n");
exit(1);
}
}
return head;
}
/* visitor to print -audiodev option */
typedef struct {
Visitor visitor;
bool comma;
GList *path;
} LegacyPrintVisitor;
static void lv_start_struct(Visitor *v, const char *name, void **obj,
size_t size, Error **errp)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
lv->path = g_list_append(lv->path, g_strdup(name));
}
static void lv_end_struct(Visitor *v, void **obj)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
lv->path = g_list_delete_link(lv->path, g_list_last(lv->path));
}
static void lv_print_key(Visitor *v, const char *name)
{
GList *e;
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
if (lv->comma) {
putchar(',');
} else {
lv->comma = true;
}
for (e = lv->path; e; e = e->next) {
if (e->data) {
printf("%s.", (const char *) e->data);
}
}
printf("%s=", name);
}
static void lv_type_int64(Visitor *v, const char *name, int64_t *obj,
Error **errp)
{
lv_print_key(v, name);
printf("%" PRIi64, *obj);
}
static void lv_type_uint64(Visitor *v, const char *name, uint64_t *obj,
Error **errp)
{
lv_print_key(v, name);
printf("%" PRIu64, *obj);
}
static void lv_type_bool(Visitor *v, const char *name, bool *obj, Error **errp)
{
lv_print_key(v, name);
printf("%s", *obj ? "on" : "off");
}
static void lv_type_str(Visitor *v, const char *name, char **obj, Error **errp)
{
const char *str = *obj;
lv_print_key(v, name);
while (*str) {
if (*str == ',') {
putchar(',');
}
putchar(*str++);
}
}
static void lv_complete(Visitor *v, void *opaque)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
assert(lv->path == NULL);
}
static void lv_free(Visitor *v)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
g_list_free_full(lv->path, g_free);
g_free(lv);
}
static Visitor *legacy_visitor_new(void)
{
LegacyPrintVisitor *lv = g_malloc0(sizeof(LegacyPrintVisitor));
lv->visitor.start_struct = lv_start_struct;
lv->visitor.end_struct = lv_end_struct;
/* lists not supported */
lv->visitor.type_int64 = lv_type_int64;
lv->visitor.type_uint64 = lv_type_uint64;
lv->visitor.type_bool = lv_type_bool;
lv->visitor.type_str = lv_type_str;
lv->visitor.type = VISITOR_OUTPUT;
lv->visitor.complete = lv_complete;
lv->visitor.free = lv_free;
return &lv->visitor;
}
void audio_legacy_help(void)
{
AudiodevListHead head;
AudiodevListEntry *e;
printf("Environment variable based configuration deprecated.\n");
printf("Please use the new -audiodev option.\n");
head = audio_handle_legacy_opts();
printf("\nEquivalent -audiodev to your current environment variables:\n");
if (!getenv("QEMU_AUDIO_DRV")) {
printf("(Since you didn't specify QEMU_AUDIO_DRV, I'll list all "
"possibilities)\n");
}
QSIMPLEQ_FOREACH(e, &head, next) {
Visitor *v;
Audiodev *dev = e->dev;
printf("-audiodev ");
v = legacy_visitor_new();
visit_type_Audiodev(v, NULL, &dev, &error_abort);
visit_free(v);
printf("\n");
}
audio_free_audiodev_list(&head);
}

View File

@@ -1,4 +1,5 @@
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "audio.h"
#define AUDIO_CAP "audio-pt"
@@ -30,7 +31,7 @@ int audio_pt_init (struct audio_pt *p, void *(*func) (void *),
err = sigfillset (&set);
if (err) {
logerr(p, errno, "%s(%s): sigfillset failed", cap, __func__);
logerr (p, errno, "%s(%s): sigfillset failed", cap, AUDIO_FUNC);
return -1;
}
@@ -56,8 +57,8 @@ int audio_pt_init (struct audio_pt *p, void *(*func) (void *),
err2 = pthread_sigmask (SIG_SETMASK, &old_set, NULL);
if (err2) {
logerr(p, err2, "%s(%s): pthread_sigmask (restore) failed",
cap, __func__);
logerr (p, err2, "%s(%s): pthread_sigmask (restore) failed",
cap, AUDIO_FUNC);
/* We have failed to restore original signal mask, all bets are off,
so terminate the process */
exit (EXIT_FAILURE);
@@ -73,17 +74,17 @@ int audio_pt_init (struct audio_pt *p, void *(*func) (void *),
err2:
err2 = pthread_cond_destroy (&p->cond);
if (err2) {
logerr(p, err2, "%s(%s): pthread_cond_destroy failed", cap, __func__);
logerr (p, err2, "%s(%s): pthread_cond_destroy failed", cap, AUDIO_FUNC);
}
err1:
err2 = pthread_mutex_destroy (&p->mutex);
if (err2) {
logerr(p, err2, "%s(%s): pthread_mutex_destroy failed", cap, __func__);
logerr (p, err2, "%s(%s): pthread_mutex_destroy failed", cap, AUDIO_FUNC);
}
err0:
logerr(p, err, "%s(%s): %s failed", cap, __func__, efunc);
logerr (p, err, "%s(%s): %s failed", cap, AUDIO_FUNC, efunc);
return -1;
}
@@ -93,13 +94,13 @@ int audio_pt_fini (struct audio_pt *p, const char *cap)
err = pthread_cond_destroy (&p->cond);
if (err) {
logerr(p, err, "%s(%s): pthread_cond_destroy failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_cond_destroy failed", cap, AUDIO_FUNC);
ret = -1;
}
err = pthread_mutex_destroy (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_destroy failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_mutex_destroy failed", cap, AUDIO_FUNC);
ret = -1;
}
return ret;
@@ -111,7 +112,7 @@ int audio_pt_lock (struct audio_pt *p, const char *cap)
err = pthread_mutex_lock (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_lock failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_mutex_lock failed", cap, AUDIO_FUNC);
return -1;
}
return 0;
@@ -123,7 +124,7 @@ int audio_pt_unlock (struct audio_pt *p, const char *cap)
err = pthread_mutex_unlock (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_unlock failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_mutex_unlock failed", cap, AUDIO_FUNC);
return -1;
}
return 0;
@@ -135,7 +136,7 @@ int audio_pt_wait (struct audio_pt *p, const char *cap)
err = pthread_cond_wait (&p->cond, &p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_cond_wait failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_cond_wait failed", cap, AUDIO_FUNC);
return -1;
}
return 0;
@@ -147,12 +148,12 @@ int audio_pt_unlock_and_signal (struct audio_pt *p, const char *cap)
err = pthread_mutex_unlock (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_unlock failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_mutex_unlock failed", cap, AUDIO_FUNC);
return -1;
}
err = pthread_cond_signal (&p->cond);
if (err) {
logerr(p, err, "%s(%s): pthread_cond_signal failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_cond_signal failed", cap, AUDIO_FUNC);
return -1;
}
return 0;
@@ -165,7 +166,7 @@ int audio_pt_join (struct audio_pt *p, void **arg, const char *cap)
err = pthread_join (p->thread, &ret);
if (err) {
logerr(p, err, "%s(%s): pthread_join failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_join failed", cap, AUDIO_FUNC);
return -1;
}
*arg = ret;

View File

@@ -19,4 +19,4 @@ int audio_pt_wait (struct audio_pt *, const char *);
int audio_pt_unlock_and_signal (struct audio_pt *, const char *);
int audio_pt_join (struct audio_pt *, void **, const char *);
#endif /* QEMU_AUDIO_PT_INT_H */
#endif /* audio_pt_int.h */

View File

@@ -57,13 +57,13 @@ static void glue (audio_init_nb_voices_, TYPE) (struct audio_driver *drv)
glue (s->nb_hw_voices_, TYPE) = max_voices;
}
if (audio_bug(__func__, !voice_size && max_voices)) {
if (audio_bug (AUDIO_FUNC, !voice_size && max_voices)) {
dolog ("drv=`%s' voice_size=0 max_voices=%d\n",
drv->name, max_voices);
glue (s->nb_hw_voices_, TYPE) = 0;
}
if (audio_bug(__func__, voice_size && !max_voices)) {
if (audio_bug (AUDIO_FUNC, voice_size && !max_voices)) {
dolog ("drv=`%s' voice_size=%d max_voices=0\n",
drv->name, voice_size);
}
@@ -77,7 +77,7 @@ static void glue (audio_pcm_hw_free_resources_, TYPE) (HW *hw)
static int glue (audio_pcm_hw_alloc_resources_, TYPE) (HW *hw)
{
HWBUF = audio_calloc(__func__, hw->samples, sizeof(struct st_sample));
HWBUF = audio_calloc (AUDIO_FUNC, hw->samples, sizeof (struct st_sample));
if (!HWBUF) {
dolog ("Could not allocate " NAME " buffer (%d samples)\n",
hw->samples);
@@ -105,7 +105,7 @@ static int glue (audio_pcm_sw_alloc_resources_, TYPE) (SW *sw)
samples = ((int64_t) sw->hw->samples << 32) / sw->ratio;
sw->buf = audio_calloc(__func__, samples, sizeof(struct st_sample));
sw->buf = audio_calloc (AUDIO_FUNC, samples, sizeof (struct st_sample));
if (!sw->buf) {
dolog ("Could not allocate buffer for `%s' (%d samples)\n",
SW_NAME (sw), samples);
@@ -238,17 +238,17 @@ static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
return NULL;
}
if (audio_bug(__func__, !drv)) {
if (audio_bug (AUDIO_FUNC, !drv)) {
dolog ("No host audio driver\n");
return NULL;
}
if (audio_bug(__func__, !drv->pcm_ops)) {
if (audio_bug (AUDIO_FUNC, !drv->pcm_ops)) {
dolog ("Host audio driver without pcm_ops\n");
return NULL;
}
hw = audio_calloc(__func__, 1, glue(drv->voice_size_, TYPE));
hw = audio_calloc (AUDIO_FUNC, 1, glue (drv->voice_size_, TYPE));
if (!hw) {
dolog ("Can not allocate voice `%s' size %d\n",
drv->name, glue (drv->voice_size_, TYPE));
@@ -266,7 +266,7 @@ static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
goto err0;
}
if (audio_bug(__func__, hw->samples <= 0)) {
if (audio_bug (AUDIO_FUNC, hw->samples <= 0)) {
dolog ("hw->samples=%d\n", hw->samples);
goto err1;
}
@@ -299,42 +299,11 @@ static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
return NULL;
}
AudiodevPerDirectionOptions *glue(audio_get_pdo_, TYPE)(Audiodev *dev)
{
switch (dev->driver) {
case AUDIODEV_DRIVER_NONE:
return dev->u.none.TYPE;
case AUDIODEV_DRIVER_ALSA:
return qapi_AudiodevAlsaPerDirectionOptions_base(dev->u.alsa.TYPE);
case AUDIODEV_DRIVER_COREAUDIO:
return qapi_AudiodevCoreaudioPerDirectionOptions_base(
dev->u.coreaudio.TYPE);
case AUDIODEV_DRIVER_DSOUND:
return dev->u.dsound.TYPE;
case AUDIODEV_DRIVER_OSS:
return qapi_AudiodevOssPerDirectionOptions_base(dev->u.oss.TYPE);
case AUDIODEV_DRIVER_PA:
return qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.TYPE);
case AUDIODEV_DRIVER_SDL:
return dev->u.sdl.TYPE;
case AUDIODEV_DRIVER_SPICE:
return dev->u.spice.TYPE;
case AUDIODEV_DRIVER_WAV:
return dev->u.wav.TYPE;
case AUDIODEV_DRIVER__MAX:
break;
}
abort();
}
static HW *glue (audio_pcm_hw_add_, TYPE) (struct audsettings *as)
{
HW *hw;
AudioState *s = &glob_audio_state;
AudiodevPerDirectionOptions *pdo = glue(audio_get_pdo_, TYPE)(s->dev);
if (pdo->fixed_settings) {
if (glue (conf.fixed_, TYPE).enabled && glue (conf.fixed_, TYPE).greedy) {
hw = glue (audio_pcm_hw_add_new_, TYPE) (as);
if (hw) {
return hw;
@@ -362,17 +331,15 @@ static SW *glue (audio_pcm_create_voice_pair_, TYPE) (
SW *sw;
HW *hw;
struct audsettings hw_as;
AudioState *s = &glob_audio_state;
AudiodevPerDirectionOptions *pdo = glue(audio_get_pdo_, TYPE)(s->dev);
if (pdo->fixed_settings) {
hw_as = audiodev_to_audsettings(pdo);
if (glue (conf.fixed_, TYPE).enabled) {
hw_as = glue (conf.fixed_, TYPE).settings;
}
else {
hw_as = *as;
}
sw = audio_calloc(__func__, 1, sizeof(*sw));
sw = audio_calloc (AUDIO_FUNC, 1, sizeof (*sw));
if (!sw) {
dolog ("Could not allocate soft voice `%s' (%zu bytes)\n",
sw_name ? sw_name : "unknown", sizeof (*sw));
@@ -412,7 +379,7 @@ static void glue (audio_close_, TYPE) (SW *sw)
void glue (AUD_close_, TYPE) (QEMUSoundCard *card, SW *sw)
{
if (sw) {
if (audio_bug(__func__, !card)) {
if (audio_bug (AUDIO_FUNC, !card)) {
dolog ("card=%p\n", card);
return;
}
@@ -431,9 +398,8 @@ SW *glue (AUD_open_, TYPE) (
)
{
AudioState *s = &glob_audio_state;
AudiodevPerDirectionOptions *pdo = glue(audio_get_pdo_, TYPE)(s->dev);
if (audio_bug(__func__, !card || !name || !callback_fn || !as)) {
if (audio_bug (AUDIO_FUNC, !card || !name || !callback_fn || !as)) {
dolog ("card=%p name=%p callback_fn=%p as=%p\n",
card, name, callback_fn, as);
goto fail;
@@ -442,12 +408,12 @@ SW *glue (AUD_open_, TYPE) (
ldebug ("open %s, freq %d, nchannels %d, fmt %d\n",
name, as->freq, as->nchannels, as->fmt);
if (audio_bug(__func__, audio_validate_settings(as))) {
if (audio_bug (AUDIO_FUNC, audio_validate_settings (as))) {
audio_print_settings (as);
goto fail;
}
if (audio_bug(__func__, !s->drv)) {
if (audio_bug (AUDIO_FUNC, !s->drv)) {
dolog ("Can not open `%s' (no host audio driver)\n", name);
goto fail;
}
@@ -456,7 +422,7 @@ SW *glue (AUD_open_, TYPE) (
return sw;
}
if (!pdo->fixed_settings && sw) {
if (!glue (conf.fixed_, TYPE).enabled && sw) {
glue (AUD_close_, TYPE) (card, sw);
sw = NULL;
}

View File

@@ -24,20 +24,20 @@ int waveformat_from_audio_settings (WAVEFORMATEX *wfx,
wfx->cbSize = 0;
switch (as->fmt) {
case AUDIO_FORMAT_S8:
case AUDIO_FORMAT_U8:
case AUD_FMT_S8:
case AUD_FMT_U8:
wfx->wBitsPerSample = 8;
break;
case AUDIO_FORMAT_S16:
case AUDIO_FORMAT_U16:
case AUD_FMT_S16:
case AUD_FMT_U16:
wfx->wBitsPerSample = 16;
wfx->nAvgBytesPerSec <<= 1;
wfx->nBlockAlign <<= 1;
break;
case AUDIO_FORMAT_S32:
case AUDIO_FORMAT_U32:
case AUD_FMT_S32:
case AUD_FMT_U32:
wfx->wBitsPerSample = 32;
wfx->nAvgBytesPerSec <<= 2;
wfx->nBlockAlign <<= 2;
@@ -85,15 +85,15 @@ int waveformat_to_audio_settings (WAVEFORMATEX *wfx,
switch (wfx->wBitsPerSample) {
case 8:
as->fmt = AUDIO_FORMAT_U8;
as->fmt = AUD_FMT_U8;
break;
case 16:
as->fmt = AUDIO_FORMAT_S16;
as->fmt = AUD_FMT_S16;
break;
case 32:
as->fmt = AUDIO_FORMAT_S32;
as->fmt = AUD_FMT_S32;
break;
default:

View File

@@ -26,7 +26,7 @@
#include <CoreAudio/CoreAudio.h>
#include <pthread.h> /* pthread_X */
#include "qemu/module.h"
#include "qemu-common.h"
#include "audio.h"
#define AUDIO_CAP "coreaudio"
@@ -36,6 +36,13 @@
#define MAC_OS_X_VERSION_10_6 1060
#endif
static int isAtexit;
typedef struct {
int buffer_frames;
int nbuffers;
} CoreaudioConf;
typedef struct coreaudioVoiceOut {
HWVoiceOut hw;
pthread_mutex_t mutex;
@@ -371,6 +378,11 @@ static inline UInt32 isPlaying (AudioDeviceID outputDeviceID)
return result;
}
static void coreaudio_atexit (void)
{
isAtexit = 1;
}
static int coreaudio_lock (coreaudioVoiceOut *core, const char *fn_name)
{
int err;
@@ -502,9 +514,7 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
int err;
const char *typ = "playback";
AudioValueRange frameRange;
Audiodev *dev = drv_opaque;
AudiodevCoreaudioPerDirectionOptions *cpdo = dev->u.coreaudio.out;
int frames;
CoreaudioConf *conf = drv_opaque;
/* create mutex */
err = pthread_mutex_init(&core->mutex, NULL);
@@ -535,17 +545,16 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
return -1;
}
frames = audio_buffer_frames(
qapi_AudiodevCoreaudioPerDirectionOptions_base(cpdo), as, 11610);
if (frameRange.mMinimum > frames) {
if (frameRange.mMinimum > conf->buffer_frames) {
core->audioDevicePropertyBufferFrameSize = (UInt32) frameRange.mMinimum;
dolog ("warning: Upsizing Buffer Frames to %f\n", frameRange.mMinimum);
} else if (frameRange.mMaximum < frames) {
}
else if (frameRange.mMaximum < conf->buffer_frames) {
core->audioDevicePropertyBufferFrameSize = (UInt32) frameRange.mMaximum;
dolog ("warning: Downsizing Buffer Frames to %f\n", frameRange.mMaximum);
}
else {
core->audioDevicePropertyBufferFrameSize = frames;
core->audioDevicePropertyBufferFrameSize = conf->buffer_frames;
}
/* set Buffer Frame Size */
@@ -566,8 +575,7 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
"Could not get device buffer frame size\n");
return -1;
}
hw->samples = (cpdo->has_buffer_count ? cpdo->buffer_count : 4) *
core->audioDevicePropertyBufferFrameSize;
hw->samples = conf->nbuffers * core->audioDevicePropertyBufferFrameSize;
/* get StreamFormat */
status = coreaudio_get_streamformat(core->outputDeviceID,
@@ -622,7 +630,7 @@ static void coreaudio_fini_out (HWVoiceOut *hw)
int err;
coreaudioVoiceOut *core = (coreaudioVoiceOut *) hw;
if (!audio_is_cleaning_up()) {
if (!isAtexit) {
/* stop playback */
if (isPlaying(core->outputDeviceID)) {
status = AudioDeviceStop(core->outputDeviceID, core->ioprocid);
@@ -665,7 +673,7 @@ static int coreaudio_ctl_out (HWVoiceOut *hw, int cmd, ...)
case VOICE_DISABLE:
/* stop playback */
if (!audio_is_cleaning_up()) {
if (!isAtexit) {
if (isPlaying(core->outputDeviceID)) {
status = AudioDeviceStop(core->outputDeviceID,
core->ioprocid);
@@ -679,15 +687,41 @@ static int coreaudio_ctl_out (HWVoiceOut *hw, int cmd, ...)
return 0;
}
static void *coreaudio_audio_init(Audiodev *dev)
static CoreaudioConf glob_conf = {
.buffer_frames = 512,
.nbuffers = 4,
};
static void *coreaudio_audio_init (void)
{
return dev;
CoreaudioConf *conf = g_malloc(sizeof(CoreaudioConf));
*conf = glob_conf;
atexit(coreaudio_atexit);
return conf;
}
static void coreaudio_audio_fini (void *opaque)
{
g_free(opaque);
}
static struct audio_option coreaudio_options[] = {
{
.name = "BUFFER_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.buffer_frames,
.descr = "Size of the buffer in frames"
},
{
.name = "BUFFER_COUNT",
.tag = AUD_OPT_INT,
.valp = &glob_conf.nbuffers,
.descr = "Number of buffers"
},
{ /* End of list */ }
};
static struct audio_pcm_ops coreaudio_pcm_ops = {
.init_out = coreaudio_init_out,
.fini_out = coreaudio_fini_out,
@@ -696,9 +730,10 @@ static struct audio_pcm_ops coreaudio_pcm_ops = {
.ctl_out = coreaudio_ctl_out
};
static struct audio_driver coreaudio_audio_driver = {
struct audio_driver coreaudio_audio_driver = {
.name = "coreaudio",
.descr = "CoreAudio http://developer.apple.com/audio/coreaudio.html",
.options = coreaudio_options,
.init = coreaudio_audio_init,
.fini = coreaudio_audio_fini,
.pcm_ops = &coreaudio_pcm_ops,
@@ -708,9 +743,3 @@ static struct audio_driver coreaudio_audio_driver = {
.voice_size_out = sizeof (coreaudioVoiceOut),
.voice_size_in = 0
};
static void register_audio_coreaudio(void)
{
audio_driver_register(&coreaudio_audio_driver);
}
type_init(register_audio_coreaudio);

View File

@@ -167,18 +167,17 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
dsound *s = drv_opaque;
WAVEFORMATEX wfx;
struct audsettings obt_as;
DSoundConf *conf = &s->conf;
#ifdef DSBTYPE_IN
const char *typ = "ADC";
DSoundVoiceIn *ds = (DSoundVoiceIn *) hw;
DSCBUFFERDESC bd;
DSCBCAPS bc;
AudiodevPerDirectionOptions *pdo = s->dev->u.dsound.in;
#else
const char *typ = "DAC";
DSoundVoiceOut *ds = (DSoundVoiceOut *) hw;
DSBUFFERDESC bd;
DSBCAPS bc;
AudiodevPerDirectionOptions *pdo = s->dev->u.dsound.out;
#endif
if (!s->FIELD2) {
@@ -194,8 +193,8 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
memset (&bd, 0, sizeof (bd));
bd.dwSize = sizeof (bd);
bd.lpwfxFormat = &wfx;
bd.dwBufferBytes = audio_buffer_bytes(pdo, as, 92880);
#ifdef DSBTYPE_IN
bd.dwBufferBytes = conf->bufsize_in;
hr = IDirectSoundCapture_CreateCaptureBuffer (
s->dsound_capture,
&bd,
@@ -204,6 +203,7 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
);
#else
bd.dwFlags = DSBCAPS_STICKYFOCUS | DSBCAPS_GETCURRENTPOSITION2;
bd.dwBufferBytes = conf->bufsize_out;
hr = IDirectSound_CreateSoundBuffer (
s->dsound,
&bd,

View File

@@ -27,12 +27,11 @@
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "audio.h"
#define AUDIO_CAP "dsound"
#include "audio_int.h"
#include "qemu/host-utils.h"
#include "qemu/module.h"
#include <windows.h>
#include <mmsystem.h>
@@ -43,11 +42,17 @@
/* #define DEBUG_DSOUND */
typedef struct {
int bufsize_in;
int bufsize_out;
int latency_millis;
} DSoundConf;
typedef struct {
LPDIRECTSOUND dsound;
LPDIRECTSOUNDCAPTURE dsound_capture;
struct audsettings settings;
Audiodev *dev;
DSoundConf conf;
} dsound;
typedef struct {
@@ -243,9 +248,9 @@ static void GCC_FMT_ATTR (3, 4) dsound_logerr2 (
dsound_log_hresult (hr);
}
static uint64_t usecs_to_bytes(struct audio_pcm_info *info, uint32_t usecs)
static DWORD millis_to_bytes (struct audio_pcm_info *info, DWORD millis)
{
return muldiv64(usecs, info->bytes_per_second, 1000000);
return (millis * info->bytes_per_second) / 1000;
}
#ifdef DEBUG_DSOUND
@@ -473,7 +478,7 @@ static int dsound_run_out (HWVoiceOut *hw, int live)
LPVOID p1, p2;
int bufsize;
dsound *s = ds->s;
AudiodevDsoundOptions *dso = &s->dev->u.dsound;
DSoundConf *conf = &s->conf;
if (!dsb) {
dolog ("Attempt to run empty with playback buffer\n");
@@ -496,14 +501,14 @@ static int dsound_run_out (HWVoiceOut *hw, int live)
len = live << hwshift;
if (ds->first_time) {
if (dso->latency) {
if (conf->latency_millis) {
DWORD cur_blat;
cur_blat = audio_ring_dist (wpos, ppos, bufsize);
ds->first_time = 0;
old_pos = wpos;
old_pos +=
usecs_to_bytes(&hw->info, dso->latency) - cur_blat;
millis_to_bytes (&hw->info, conf->latency_millis) - cur_blat;
old_pos %= bufsize;
old_pos &= ~hw->info.align;
}
@@ -538,7 +543,7 @@ static int dsound_run_out (HWVoiceOut *hw, int live)
}
}
if (audio_bug(__func__, len < 0 || len > bufsize)) {
if (audio_bug (AUDIO_FUNC, len < 0 || len > bufsize)) {
dolog ("len=%d bufsize=%d old_pos=%ld ppos=%ld\n",
len, bufsize, old_pos, ppos);
return 0;
@@ -742,6 +747,12 @@ static int dsound_run_in (HWVoiceIn *hw)
return decr;
}
static DSoundConf glob_conf = {
.bufsize_in = 16384,
.bufsize_out = 16384,
.latency_millis = 10
};
static void dsound_audio_fini (void *opaque)
{
HRESULT hr;
@@ -772,22 +783,13 @@ static void dsound_audio_fini (void *opaque)
g_free(s);
}
static void *dsound_audio_init(Audiodev *dev)
static void *dsound_audio_init (void)
{
int err;
HRESULT hr;
dsound *s = g_malloc0(sizeof(dsound));
AudiodevDsoundOptions *dso;
assert(dev->driver == AUDIODEV_DRIVER_DSOUND);
s->dev = dev;
dso = &dev->u.dsound;
if (!dso->has_latency) {
dso->has_latency = true;
dso->latency = 10000; /* 10 ms */
}
s->conf = glob_conf;
hr = CoInitialize (NULL);
if (FAILED (hr)) {
dsound_logerr (hr, "Could not initialize COM\n");
@@ -852,6 +854,28 @@ static void *dsound_audio_init(Audiodev *dev)
return s;
}
static struct audio_option dsound_options[] = {
{
.name = "LATENCY_MILLIS",
.tag = AUD_OPT_INT,
.valp = &glob_conf.latency_millis,
.descr = "(undocumented)"
},
{
.name = "BUFSIZE_OUT",
.tag = AUD_OPT_INT,
.valp = &glob_conf.bufsize_out,
.descr = "(undocumented)"
},
{
.name = "BUFSIZE_IN",
.tag = AUD_OPT_INT,
.valp = &glob_conf.bufsize_in,
.descr = "(undocumented)"
},
{ /* End of list */ }
};
static struct audio_pcm_ops dsound_pcm_ops = {
.init_out = dsound_init_out,
.fini_out = dsound_fini_out,
@@ -866,9 +890,10 @@ static struct audio_pcm_ops dsound_pcm_ops = {
.ctl_in = dsound_ctl_in
};
static struct audio_driver dsound_audio_driver = {
struct audio_driver dsound_audio_driver = {
.name = "dsound",
.descr = "DirectSound http://wikipedia.org/wiki/DirectSound",
.options = dsound_options,
.init = dsound_audio_init,
.fini = dsound_audio_fini,
.pcm_ops = &dsound_pcm_ops,
@@ -878,9 +903,3 @@ static struct audio_driver dsound_audio_driver = {
.voice_size_out = sizeof (DSoundVoiceOut),
.voice_size_in = sizeof (DSoundVoiceIn)
};
static void register_audio_dsound(void)
{
audio_driver_register(&dsound_audio_driver);
}
type_init(register_audio_dsound);

View File

@@ -23,8 +23,7 @@
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/bswap.h"
#include "qemu/error-report.h"
#include "qemu-common.h"
#include "audio.h"
#define AUDIO_CAP "mixeng"
@@ -267,37 +266,6 @@ f_sample *mixeng_clip[2][2][2][3] = {
}
};
void audio_sample_to_uint64(void *samples, int pos,
uint64_t *left, uint64_t *right)
{
struct st_sample *sample = samples;
sample += pos;
#ifdef FLOAT_MIXENG
error_report(
"Coreaudio and floating point samples are not supported by replay yet");
abort();
#else
*left = sample->l;
*right = sample->r;
#endif
}
void audio_sample_from_uint64(void *samples, int pos,
uint64_t left, uint64_t right)
{
struct st_sample *sample = samples;
sample += pos;
#ifdef FLOAT_MIXENG
error_report(
"Coreaudio and floating point samples are not supported by replay yet");
abort();
#else
sample->l = left;
sample->r = right;
#endif
}
/*
* August 21, 1998
* Copyright 1998 Fabrice Bellard.
@@ -343,7 +311,7 @@ struct rate {
*/
void *st_rate_start (int inrate, int outrate)
{
struct rate *rate = audio_calloc(__func__, 1, sizeof(*rate));
struct rate *rate = audio_calloc (AUDIO_FUNC, 1, sizeof (*rate));
if (!rate) {
dolog ("Could not allocate resampler (%zu bytes)\n", sizeof (*rate));

View File

@@ -21,7 +21,6 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef QEMU_MIXENG_H
#define QEMU_MIXENG_H
@@ -49,4 +48,4 @@ void st_rate_stop (void *opaque);
void mixeng_clear (struct st_sample *buf, int len);
void mixeng_volume (struct st_sample *buf, int len, struct mixeng_volume *vol);
#endif /* QEMU_MIXENG_H */
#endif /* mixeng.h */

View File

@@ -21,10 +21,8 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/host-utils.h"
#include "qemu/module.h"
#include "qemu-common.h"
#include "audio.h"
#include "qemu/timer.h"
@@ -137,7 +135,7 @@ static int no_ctl_in (HWVoiceIn *hw, int cmd, ...)
return 0;
}
static void *no_audio_init(Audiodev *dev)
static void *no_audio_init (void)
{
return &no_audio_init;
}
@@ -161,9 +159,10 @@ static struct audio_pcm_ops no_pcm_ops = {
.ctl_in = no_ctl_in
};
static struct audio_driver no_audio_driver = {
struct audio_driver no_audio_driver = {
.name = "none",
.descr = "Timer based audio emulation",
.options = NULL,
.init = no_audio_init,
.fini = no_audio_fini,
.pcm_ops = &no_pcm_ops,
@@ -173,9 +172,3 @@ static struct audio_driver no_audio_driver = {
.voice_size_out = sizeof (NoVoiceOut),
.voice_size_in = sizeof (NoVoiceIn)
};
static void register_audio_none(void)
{
audio_driver_register(&no_audio_driver);
}
type_init(register_audio_none);

View File

@@ -21,12 +21,12 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <sys/mman.h>
#include <sys/ioctl.h>
#include <sys/soundcard.h>
#include "qemu-common.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
#include "qemu/host-utils.h"
#include "audio.h"
#include "trace.h"
@@ -38,6 +38,16 @@
#define USE_DSP_POLICY
#endif
typedef struct OSSConf {
int try_mmap;
int nfrags;
int fragsize;
const char *devpath_out;
const char *devpath_in;
int exclusive;
int policy;
} OSSConf;
typedef struct OSSVoiceOut {
HWVoiceOut hw;
void *pcm_buf;
@@ -47,7 +57,7 @@ typedef struct OSSVoiceOut {
int fragsize;
int mmapped;
int pending;
Audiodev *dev;
OSSConf *conf;
} OSSVoiceOut;
typedef struct OSSVoiceIn {
@@ -56,12 +66,12 @@ typedef struct OSSVoiceIn {
int fd;
int nfrags;
int fragsize;
Audiodev *dev;
OSSConf *conf;
} OSSVoiceIn;
struct oss_params {
int freq;
int fmt;
audfmt_e fmt;
int nchannels;
int nfrags;
int fragsize;
@@ -139,16 +149,16 @@ static int oss_write (SWVoiceOut *sw, void *buf, int len)
return audio_pcm_sw_write (sw, buf, len);
}
static int aud_to_ossfmt (AudioFormat fmt, int endianness)
static int aud_to_ossfmt (audfmt_e fmt, int endianness)
{
switch (fmt) {
case AUDIO_FORMAT_S8:
case AUD_FMT_S8:
return AFMT_S8;
case AUDIO_FORMAT_U8:
case AUD_FMT_U8:
return AFMT_U8;
case AUDIO_FORMAT_S16:
case AUD_FMT_S16:
if (endianness) {
return AFMT_S16_BE;
}
@@ -156,7 +166,7 @@ static int aud_to_ossfmt (AudioFormat fmt, int endianness)
return AFMT_S16_LE;
}
case AUDIO_FORMAT_U16:
case AUD_FMT_U16:
if (endianness) {
return AFMT_U16_BE;
}
@@ -173,37 +183,37 @@ static int aud_to_ossfmt (AudioFormat fmt, int endianness)
}
}
static int oss_to_audfmt (int ossfmt, AudioFormat *fmt, int *endianness)
static int oss_to_audfmt (int ossfmt, audfmt_e *fmt, int *endianness)
{
switch (ossfmt) {
case AFMT_S8:
*endianness = 0;
*fmt = AUDIO_FORMAT_S8;
*fmt = AUD_FMT_S8;
break;
case AFMT_U8:
*endianness = 0;
*fmt = AUDIO_FORMAT_U8;
*fmt = AUD_FMT_U8;
break;
case AFMT_S16_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AFMT_U16_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
case AFMT_S16_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AFMT_U16_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
default:
@@ -253,25 +263,19 @@ static int oss_get_version (int fd, int *version, const char *typ)
}
#endif
static int oss_open(int in, struct oss_params *req, audsettings *as,
struct oss_params *obt, int *pfd, Audiodev *dev)
static int oss_open (int in, struct oss_params *req,
struct oss_params *obt, int *pfd, OSSConf* conf)
{
AudiodevOssOptions *oopts = &dev->u.oss;
AudiodevOssPerDirectionOptions *opdo = in ? oopts->in : oopts->out;
int fd;
int oflags = (oopts->has_exclusive && oopts->exclusive) ? O_EXCL : 0;
int oflags = conf->exclusive ? O_EXCL : 0;
audio_buf_info abinfo;
int fmt, freq, nchannels;
int setfragment = 1;
const char *dspname = opdo->has_dev ? opdo->dev : "/dev/dsp";
const char *dspname = in ? conf->devpath_in : conf->devpath_out;
const char *typ = in ? "ADC" : "DAC";
#ifdef USE_DSP_POLICY
int policy = oopts->has_dsp_policy ? oopts->dsp_policy : 5;
#endif
/* Kludge needed to have working mmap on Linux */
oflags |= (oopts->has_try_mmap && oopts->try_mmap) ?
O_RDWR : (in ? O_RDONLY : O_WRONLY);
oflags |= conf->try_mmap ? O_RDWR : (in ? O_RDONLY : O_WRONLY);
fd = open (dspname, oflags | O_NONBLOCK);
if (-1 == fd) {
@@ -282,9 +286,6 @@ static int oss_open(int in, struct oss_params *req, audsettings *as,
freq = req->freq;
nchannels = req->nchannels;
fmt = req->fmt;
req->nfrags = opdo->has_buffer_count ? opdo->buffer_count : 4;
req->fragsize = audio_buffer_bytes(
qapi_AudiodevOssPerDirectionOptions_base(opdo), as, 23220);
if (ioctl (fd, SNDCTL_DSP_SAMPLESIZE, &fmt)) {
oss_logerr2 (errno, typ, "Failed to set sample size %d\n", req->fmt);
@@ -308,18 +309,18 @@ static int oss_open(int in, struct oss_params *req, audsettings *as,
}
#ifdef USE_DSP_POLICY
if (policy >= 0) {
if (conf->policy >= 0) {
int version;
if (!oss_get_version (fd, &version, typ)) {
trace_oss_version(version);
if (version >= 0x040000) {
int policy2 = policy;
if (ioctl(fd, SNDCTL_DSP_POLICY, &policy2)) {
int policy = conf->policy;
if (ioctl (fd, SNDCTL_DSP_POLICY, &policy)) {
oss_logerr2 (errno, typ,
"Failed to set timing policy to %d\n",
policy);
conf->policy);
goto err;
}
setfragment = 0;
@@ -500,18 +501,19 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
int endianness;
int err;
int fd;
AudioFormat effective_fmt;
audfmt_e effective_fmt;
struct audsettings obt_as;
Audiodev *dev = drv_opaque;
AudiodevOssOptions *oopts = &dev->u.oss;
OSSConf *conf = drv_opaque;
oss->fd = -1;
req.fmt = aud_to_ossfmt (as->fmt, as->endianness);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.fragsize = conf->fragsize;
req.nfrags = conf->nfrags;
if (oss_open(0, &req, as, &obt, &fd, dev)) {
if (oss_open (0, &req, &obt, &fd, conf)) {
return -1;
}
@@ -538,7 +540,7 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
hw->samples = (obt.nfrags * obt.fragsize) >> hw->info.shift;
oss->mmapped = 0;
if (oopts->has_try_mmap && oopts->try_mmap) {
if (conf->try_mmap) {
oss->pcm_buf = mmap (
NULL,
hw->samples << hw->info.shift,
@@ -581,9 +583,11 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
}
if (!oss->mmapped) {
oss->pcm_buf = audio_calloc(__func__,
hw->samples,
1 << hw->info.shift);
oss->pcm_buf = audio_calloc (
AUDIO_FUNC,
hw->samples,
1 << hw->info.shift
);
if (!oss->pcm_buf) {
dolog (
"Could not allocate DAC buffer (%d samples, each %d bytes)\n",
@@ -596,7 +600,7 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
}
oss->fd = fd;
oss->dev = dev;
oss->conf = conf;
return 0;
}
@@ -604,12 +608,16 @@ static int oss_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
int trig;
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
AudiodevOssPerDirectionOptions *opdo = oss->dev->u.oss.out;
switch (cmd) {
case VOICE_ENABLE:
{
bool poll_mode = opdo->try_poll;
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
ldebug ("enabling voice\n");
if (poll_mode) {
@@ -662,16 +670,18 @@ static int oss_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
int endianness;
int err;
int fd;
AudioFormat effective_fmt;
audfmt_e effective_fmt;
struct audsettings obt_as;
Audiodev *dev = drv_opaque;
OSSConf *conf = drv_opaque;
oss->fd = -1;
req.fmt = aud_to_ossfmt (as->fmt, as->endianness);
req.freq = as->freq;
req.nchannels = as->nchannels;
if (oss_open(1, &req, as, &obt, &fd, dev)) {
req.fragsize = conf->fragsize;
req.nfrags = conf->nfrags;
if (oss_open (1, &req, &obt, &fd, conf)) {
return -1;
}
@@ -696,7 +706,7 @@ static int oss_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
}
hw->samples = (obt.nfrags * obt.fragsize) >> hw->info.shift;
oss->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
oss->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
if (!oss->pcm_buf) {
dolog ("Could not allocate ADC buffer (%d samples, each %d bytes)\n",
hw->samples, 1 << hw->info.shift);
@@ -705,7 +715,7 @@ static int oss_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
}
oss->fd = fd;
oss->dev = dev;
oss->conf = conf;
return 0;
}
@@ -796,12 +806,16 @@ static int oss_read (SWVoiceIn *sw, void *buf, int size)
static int oss_ctl_in (HWVoiceIn *hw, int cmd, ...)
{
OSSVoiceIn *oss = (OSSVoiceIn *) hw;
AudiodevOssPerDirectionOptions *opdo = oss->dev->u.oss.out;
switch (cmd) {
case VOICE_ENABLE:
{
bool poll_mode = opdo->try_poll;
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
if (poll_mode) {
oss_poll_in (hw);
@@ -821,36 +835,82 @@ static int oss_ctl_in (HWVoiceIn *hw, int cmd, ...)
return 0;
}
static void oss_init_per_direction(AudiodevOssPerDirectionOptions *opdo)
static OSSConf glob_conf = {
.try_mmap = 0,
.nfrags = 4,
.fragsize = 4096,
.devpath_out = "/dev/dsp",
.devpath_in = "/dev/dsp",
.exclusive = 0,
.policy = 5
};
static void *oss_audio_init (void)
{
if (!opdo->has_try_poll) {
opdo->try_poll = true;
opdo->has_try_poll = true;
}
}
OSSConf *conf = g_malloc(sizeof(OSSConf));
*conf = glob_conf;
static void *oss_audio_init(Audiodev *dev)
{
AudiodevOssOptions *oopts;
assert(dev->driver == AUDIODEV_DRIVER_OSS);
oopts = &dev->u.oss;
oss_init_per_direction(oopts->in);
oss_init_per_direction(oopts->out);
if (access(oopts->in->has_dev ? oopts->in->dev : "/dev/dsp",
R_OK | W_OK) < 0 ||
access(oopts->out->has_dev ? oopts->out->dev : "/dev/dsp",
R_OK | W_OK) < 0) {
if (access(conf->devpath_in, R_OK | W_OK) < 0 ||
access(conf->devpath_out, R_OK | W_OK) < 0) {
g_free(conf);
return NULL;
}
return dev;
return conf;
}
static void oss_audio_fini (void *opaque)
{
g_free(opaque);
}
static struct audio_option oss_options[] = {
{
.name = "FRAGSIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.fragsize,
.descr = "Fragment size in bytes"
},
{
.name = "NFRAGS",
.tag = AUD_OPT_INT,
.valp = &glob_conf.nfrags,
.descr = "Number of fragments"
},
{
.name = "MMAP",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.try_mmap,
.descr = "Try using memory mapped access"
},
{
.name = "DAC_DEV",
.tag = AUD_OPT_STR,
.valp = &glob_conf.devpath_out,
.descr = "Path to DAC device"
},
{
.name = "ADC_DEV",
.tag = AUD_OPT_STR,
.valp = &glob_conf.devpath_in,
.descr = "Path to ADC device"
},
{
.name = "EXCLUSIVE",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.exclusive,
.descr = "Open device in exclusive mode (vmix won't work)"
},
#ifdef USE_DSP_POLICY
{
.name = "POLICY",
.tag = AUD_OPT_INT,
.valp = &glob_conf.policy,
.descr = "Set the timing policy of the device, -1 to use fragment mode",
},
#endif
{ /* End of list */ }
};
static struct audio_pcm_ops oss_pcm_ops = {
.init_out = oss_init_out,
.fini_out = oss_fini_out,
@@ -865,9 +925,10 @@ static struct audio_pcm_ops oss_pcm_ops = {
.ctl_in = oss_ctl_in
};
static struct audio_driver oss_audio_driver = {
struct audio_driver oss_audio_driver = {
.name = "oss",
.descr = "OSS http://www.opensound.com",
.options = oss_options,
.init = oss_audio_init,
.fini = oss_audio_fini,
.pcm_ops = &oss_pcm_ops,
@@ -877,9 +938,3 @@ static struct audio_driver oss_audio_driver = {
.voice_size_out = sizeof (OSSVoiceOut),
.voice_size_in = sizeof (OSSVoiceIn)
};
static void register_audio_oss(void)
{
audio_driver_register(&oss_audio_driver);
}
type_init(register_audio_oss);

View File

@@ -1,9 +1,7 @@
/* public domain */
#include "qemu/osdep.h"
#include "qemu/module.h"
#include "qemu-common.h"
#include "audio.h"
#include "qapi/opts-visitor.h"
#include <pulse/pulseaudio.h>
@@ -12,7 +10,14 @@
#include "audio_pt_int.h"
typedef struct {
Audiodev *dev;
int samples;
char *server;
char *sink;
char *source;
} PAConf;
typedef struct {
PAConf conf;
pa_threaded_mainloop *mainloop;
pa_context *context;
} paaudio;
@@ -27,7 +32,6 @@ typedef struct {
void *pcm_buf;
struct audio_pt pt;
paaudio *g;
int samples;
} PAVoiceOut;
typedef struct {
@@ -42,7 +46,6 @@ typedef struct {
const void *read_data;
size_t read_index, read_length;
paaudio *g;
int samples;
} PAVoiceIn;
static void qpa_audio_fini(void *opaque);
@@ -86,7 +89,7 @@ static inline int PA_STREAM_IS_GOOD(pa_stream_state_t x)
} \
goto label; \
} \
} while (0)
} while (0);
#define CHECK_DEAD_GOTO(c, stream, rerror, label) \
do { \
@@ -104,7 +107,7 @@ static inline int PA_STREAM_IS_GOOD(pa_stream_state_t x)
} \
goto label; \
} \
} while (0)
} while (0);
static int qpa_simple_read (PAVoiceIn *p, void *data, size_t length, int *rerror)
{
@@ -203,7 +206,7 @@ static void *qpa_thread_out (void *arg)
PAVoiceOut *pa = arg;
HWVoiceOut *hw = &pa->hw;
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -219,15 +222,15 @@ static void *qpa_thread_out (void *arg)
break;
}
if (audio_pt_wait(&pa->pt, __func__)) {
if (audio_pt_wait (&pa->pt, AUDIO_FUNC)) {
goto exit;
}
}
decr = to_mix = audio_MIN(pa->live, pa->samples >> 5);
decr = to_mix = audio_MIN (pa->live, pa->g->conf.samples >> 2);
rpos = pa->rpos;
if (audio_pt_unlock(&pa->pt, __func__)) {
if (audio_pt_unlock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -248,7 +251,7 @@ static void *qpa_thread_out (void *arg)
to_mix -= chunk;
}
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -258,7 +261,7 @@ static void *qpa_thread_out (void *arg)
}
exit:
audio_pt_unlock(&pa->pt, __func__);
audio_pt_unlock (&pa->pt, AUDIO_FUNC);
return NULL;
}
@@ -267,7 +270,7 @@ static int qpa_run_out (HWVoiceOut *hw, int live)
int decr;
PAVoiceOut *pa = (PAVoiceOut *) hw;
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return 0;
}
@@ -276,10 +279,10 @@ static int qpa_run_out (HWVoiceOut *hw, int live)
pa->live = live - decr;
hw->rpos = pa->rpos;
if (pa->live > 0) {
audio_pt_unlock_and_signal(&pa->pt, __func__);
audio_pt_unlock_and_signal (&pa->pt, AUDIO_FUNC);
}
else {
audio_pt_unlock(&pa->pt, __func__);
audio_pt_unlock (&pa->pt, AUDIO_FUNC);
}
return decr;
}
@@ -295,7 +298,7 @@ static void *qpa_thread_in (void *arg)
PAVoiceIn *pa = arg;
HWVoiceIn *hw = &pa->hw;
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -311,15 +314,15 @@ static void *qpa_thread_in (void *arg)
break;
}
if (audio_pt_wait(&pa->pt, __func__)) {
if (audio_pt_wait (&pa->pt, AUDIO_FUNC)) {
goto exit;
}
}
incr = to_grab = audio_MIN(pa->dead, pa->samples >> 5);
incr = to_grab = audio_MIN (pa->dead, pa->g->conf.samples >> 2);
wpos = pa->wpos;
if (audio_pt_unlock(&pa->pt, __func__)) {
if (audio_pt_unlock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -339,7 +342,7 @@ static void *qpa_thread_in (void *arg)
to_grab -= chunk;
}
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -349,7 +352,7 @@ static void *qpa_thread_in (void *arg)
}
exit:
audio_pt_unlock(&pa->pt, __func__);
audio_pt_unlock (&pa->pt, AUDIO_FUNC);
return NULL;
}
@@ -358,7 +361,7 @@ static int qpa_run_in (HWVoiceIn *hw)
int live, incr, dead;
PAVoiceIn *pa = (PAVoiceIn *) hw;
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return 0;
}
@@ -369,10 +372,10 @@ static int qpa_run_in (HWVoiceIn *hw)
pa->dead = dead - incr;
hw->wpos = pa->wpos;
if (pa->dead > 0) {
audio_pt_unlock_and_signal(&pa->pt, __func__);
audio_pt_unlock_and_signal (&pa->pt, AUDIO_FUNC);
}
else {
audio_pt_unlock(&pa->pt, __func__);
audio_pt_unlock (&pa->pt, AUDIO_FUNC);
}
return incr;
}
@@ -382,21 +385,21 @@ static int qpa_read (SWVoiceIn *sw, void *buf, int len)
return audio_pcm_sw_read (sw, buf, len);
}
static pa_sample_format_t audfmt_to_pa (AudioFormat afmt, int endianness)
static pa_sample_format_t audfmt_to_pa (audfmt_e afmt, int endianness)
{
int format;
switch (afmt) {
case AUDIO_FORMAT_S8:
case AUDIO_FORMAT_U8:
case AUD_FMT_S8:
case AUD_FMT_U8:
format = PA_SAMPLE_U8;
break;
case AUDIO_FORMAT_S16:
case AUDIO_FORMAT_U16:
case AUD_FMT_S16:
case AUD_FMT_U16:
format = endianness ? PA_SAMPLE_S16BE : PA_SAMPLE_S16LE;
break;
case AUDIO_FORMAT_S32:
case AUDIO_FORMAT_U32:
case AUD_FMT_S32:
case AUD_FMT_U32:
format = endianness ? PA_SAMPLE_S32BE : PA_SAMPLE_S32LE;
break;
default:
@@ -407,26 +410,26 @@ static pa_sample_format_t audfmt_to_pa (AudioFormat afmt, int endianness)
return format;
}
static AudioFormat pa_to_audfmt (pa_sample_format_t fmt, int *endianness)
static audfmt_e pa_to_audfmt (pa_sample_format_t fmt, int *endianness)
{
switch (fmt) {
case PA_SAMPLE_U8:
return AUDIO_FORMAT_U8;
return AUD_FMT_U8;
case PA_SAMPLE_S16BE:
*endianness = 1;
return AUDIO_FORMAT_S16;
return AUD_FMT_S16;
case PA_SAMPLE_S16LE:
*endianness = 0;
return AUDIO_FORMAT_S16;
return AUD_FMT_S16;
case PA_SAMPLE_S32BE:
*endianness = 1;
return AUDIO_FORMAT_S32;
return AUD_FMT_S32;
case PA_SAMPLE_S32LE:
*endianness = 0;
return AUDIO_FORMAT_S32;
return AUD_FMT_S32;
default:
dolog ("Internal logic error: Bad pa_sample_format %d\n", fmt);
return AUDIO_FORMAT_U8;
return AUD_FMT_U8;
}
}
@@ -543,15 +546,17 @@ static int qpa_init_out(HWVoiceOut *hw, struct audsettings *as,
struct audsettings obt_as = *as;
PAVoiceOut *pa = (PAVoiceOut *) hw;
paaudio *g = pa->g = drv_opaque;
AudiodevPaOptions *popts = &g->dev->u.pa;
AudiodevPaPerDirectionOptions *ppdo = popts->out;
ss.format = audfmt_to_pa (as->fmt, as->endianness);
ss.channels = as->nchannels;
ss.rate = as->freq;
ba.tlength = pa_usec_to_bytes(ppdo->latency, &ss);
ba.minreq = -1;
/*
* qemu audio tick runs at 100 Hz (by default), so processing
* data chunks worth 10 ms of sound should be a good fit.
*/
ba.tlength = pa_usec_to_bytes (10 * 1000, &ss);
ba.minreq = pa_usec_to_bytes (5 * 1000, &ss);
ba.maxlength = -1;
ba.prebuf = -1;
@@ -561,7 +566,7 @@ static int qpa_init_out(HWVoiceOut *hw, struct audsettings *as,
g,
"qemu",
PA_STREAM_PLAYBACK,
ppdo->has_name ? ppdo->name : NULL,
g->conf.sink,
&ss,
NULL, /* channel map */
&ba, /* buffering attributes */
@@ -573,10 +578,8 @@ static int qpa_init_out(HWVoiceOut *hw, struct audsettings *as,
}
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = pa->samples = audio_buffer_samples(
qapi_AudiodevPaPerDirectionOptions_base(ppdo),
&obt_as, ppdo->buffer_length);
pa->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
hw->samples = g->conf.samples;
pa->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
pa->rpos = hw->rpos;
if (!pa->pcm_buf) {
dolog ("Could not allocate buffer (%d bytes)\n",
@@ -584,7 +587,7 @@ static int qpa_init_out(HWVoiceOut *hw, struct audsettings *as,
goto fail2;
}
if (audio_pt_init(&pa->pt, qpa_thread_out, hw, AUDIO_CAP, __func__)) {
if (audio_pt_init (&pa->pt, qpa_thread_out, hw, AUDIO_CAP, AUDIO_FUNC)) {
goto fail3;
}
@@ -606,32 +609,24 @@ static int qpa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
{
int error;
pa_sample_spec ss;
pa_buffer_attr ba;
struct audsettings obt_as = *as;
PAVoiceIn *pa = (PAVoiceIn *) hw;
paaudio *g = pa->g = drv_opaque;
AudiodevPaOptions *popts = &g->dev->u.pa;
AudiodevPaPerDirectionOptions *ppdo = popts->in;
ss.format = audfmt_to_pa (as->fmt, as->endianness);
ss.channels = as->nchannels;
ss.rate = as->freq;
ba.fragsize = pa_usec_to_bytes(ppdo->latency, &ss);
ba.maxlength = -1;
ba.minreq = -1;
ba.prebuf = -1;
obt_as.fmt = pa_to_audfmt (ss.format, &obt_as.endianness);
pa->stream = qpa_simple_new (
g,
"qemu",
PA_STREAM_RECORD,
ppdo->has_name ? ppdo->name : NULL,
g->conf.source,
&ss,
NULL, /* channel map */
&ba, /* buffering attributes */
NULL, /* buffering attributes */
&error
);
if (!pa->stream) {
@@ -640,10 +635,8 @@ static int qpa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
}
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = pa->samples = audio_buffer_samples(
qapi_AudiodevPaPerDirectionOptions_base(ppdo),
&obt_as, ppdo->buffer_length);
pa->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
hw->samples = g->conf.samples;
pa->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
pa->wpos = hw->wpos;
if (!pa->pcm_buf) {
dolog ("Could not allocate buffer (%d bytes)\n",
@@ -651,7 +644,7 @@ static int qpa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
goto fail2;
}
if (audio_pt_init(&pa->pt, qpa_thread_in, hw, AUDIO_CAP, __func__)) {
if (audio_pt_init (&pa->pt, qpa_thread_in, hw, AUDIO_CAP, AUDIO_FUNC)) {
goto fail3;
}
@@ -674,17 +667,17 @@ static void qpa_fini_out (HWVoiceOut *hw)
void *ret;
PAVoiceOut *pa = (PAVoiceOut *) hw;
audio_pt_lock(&pa->pt, __func__);
audio_pt_lock (&pa->pt, AUDIO_FUNC);
pa->done = 1;
audio_pt_unlock_and_signal(&pa->pt, __func__);
audio_pt_join(&pa->pt, &ret, __func__);
audio_pt_unlock_and_signal (&pa->pt, AUDIO_FUNC);
audio_pt_join (&pa->pt, &ret, AUDIO_FUNC);
if (pa->stream) {
pa_stream_unref (pa->stream);
pa->stream = NULL;
}
audio_pt_fini(&pa->pt, __func__);
audio_pt_fini (&pa->pt, AUDIO_FUNC);
g_free (pa->pcm_buf);
pa->pcm_buf = NULL;
}
@@ -694,17 +687,17 @@ static void qpa_fini_in (HWVoiceIn *hw)
void *ret;
PAVoiceIn *pa = (PAVoiceIn *) hw;
audio_pt_lock(&pa->pt, __func__);
audio_pt_lock (&pa->pt, AUDIO_FUNC);
pa->done = 1;
audio_pt_unlock_and_signal(&pa->pt, __func__);
audio_pt_join(&pa->pt, &ret, __func__);
audio_pt_unlock_and_signal (&pa->pt, AUDIO_FUNC);
audio_pt_join (&pa->pt, &ret, AUDIO_FUNC);
if (pa->stream) {
pa_stream_unref (pa->stream);
pa->stream = NULL;
}
audio_pt_fini(&pa->pt, __func__);
audio_pt_fini (&pa->pt, AUDIO_FUNC);
g_free (pa->pcm_buf);
pa->pcm_buf = NULL;
}
@@ -788,22 +781,23 @@ static int qpa_ctl_in (HWVoiceIn *hw, int cmd, ...)
pa_threaded_mainloop_lock (g->mainloop);
op = pa_context_set_source_output_volume (g->context,
pa_stream_get_index (pa->stream),
/* FIXME: use the upcoming "set_source_output_{volume,mute}" */
op = pa_context_set_source_volume_by_index (g->context,
pa_stream_get_device_index (pa->stream),
&v, NULL, NULL);
if (!op) {
qpa_logerr (pa_context_errno (g->context),
"set_source_output_volume() failed\n");
"set_source_volume() failed\n");
} else {
pa_operation_unref(op);
}
op = pa_context_set_source_output_mute (g->context,
op = pa_context_set_source_mute_by_index (g->context,
pa_stream_get_index (pa->stream),
sw->vol.mute, NULL, NULL);
if (!op) {
qpa_logerr (pa_context_errno (g->context),
"set_source_output_mute() failed\n");
"set_source_mute() failed\n");
} else {
pa_operation_unref (op);
}
@@ -814,54 +808,15 @@ static int qpa_ctl_in (HWVoiceIn *hw, int cmd, ...)
return 0;
}
static int qpa_validate_per_direction_opts(Audiodev *dev,
AudiodevPaPerDirectionOptions *pdo)
/* common */
static PAConf glob_conf = {
.samples = 4096,
};
static void *qpa_audio_init (void)
{
if (!pdo->has_buffer_length) {
pdo->has_buffer_length = true;
pdo->buffer_length = 46440;
}
if (!pdo->has_latency) {
pdo->has_latency = true;
pdo->latency = 15000;
}
return 1;
}
static void *qpa_audio_init(Audiodev *dev)
{
paaudio *g;
AudiodevPaOptions *popts = &dev->u.pa;
const char *server;
if (!popts->has_server) {
char pidfile[64];
char *runtime;
struct stat st;
runtime = getenv("XDG_RUNTIME_DIR");
if (!runtime) {
return NULL;
}
snprintf(pidfile, sizeof(pidfile), "%s/pulse/pid", runtime);
if (stat(pidfile, &st) != 0) {
return NULL;
}
}
assert(dev->driver == AUDIODEV_DRIVER_PA);
g = g_malloc(sizeof(paaudio));
server = popts->has_server ? popts->server : NULL;
if (!qpa_validate_per_direction_opts(dev, popts->in)) {
goto fail;
}
if (!qpa_validate_per_direction_opts(dev, popts->out)) {
goto fail;
}
g->dev = dev;
paaudio *g = g_malloc(sizeof(paaudio));
g->conf = glob_conf;
g->mainloop = NULL;
g->context = NULL;
@@ -871,14 +826,14 @@ static void *qpa_audio_init(Audiodev *dev)
}
g->context = pa_context_new (pa_threaded_mainloop_get_api (g->mainloop),
server);
g->conf.server);
if (!g->context) {
goto fail;
}
pa_context_set_state_callback (g->context, context_state_cb, g);
if (pa_context_connect(g->context, server, 0, NULL) < 0) {
if (pa_context_connect (g->context, g->conf.server, 0, NULL) < 0) {
qpa_logerr (pa_context_errno (g->context),
"pa_context_connect() failed\n");
goto fail;
@@ -941,6 +896,34 @@ static void qpa_audio_fini (void *opaque)
g_free(g);
}
struct audio_option qpa_options[] = {
{
.name = "SAMPLES",
.tag = AUD_OPT_INT,
.valp = &glob_conf.samples,
.descr = "buffer size in samples"
},
{
.name = "SERVER",
.tag = AUD_OPT_STR,
.valp = &glob_conf.server,
.descr = "server address"
},
{
.name = "SINK",
.tag = AUD_OPT_STR,
.valp = &glob_conf.sink,
.descr = "sink device name"
},
{
.name = "SOURCE",
.tag = AUD_OPT_STR,
.valp = &glob_conf.source,
.descr = "source device name"
},
{ /* End of list */ }
};
static struct audio_pcm_ops qpa_pcm_ops = {
.init_out = qpa_init_out,
.fini_out = qpa_fini_out,
@@ -955,9 +938,10 @@ static struct audio_pcm_ops qpa_pcm_ops = {
.ctl_in = qpa_ctl_in
};
static struct audio_driver pa_audio_driver = {
struct audio_driver pa_audio_driver = {
.name = "pa",
.descr = "http://www.pulseaudio.org/",
.options = qpa_options,
.init = qpa_audio_init,
.fini = qpa_audio_fini,
.pcm_ops = &qpa_pcm_ops,
@@ -968,9 +952,3 @@ static struct audio_driver pa_audio_driver = {
.voice_size_in = sizeof (PAVoiceIn),
.ctl_caps = VOICE_VOLUME_CAP
};
static void register_audio_pa(void)
{
audio_driver_register(&pa_audio_driver);
}
type_init(register_audio_pa);

View File

@@ -71,12 +71,6 @@ void NAME (void *opaque, struct st_sample *ibuf, struct st_sample *obuf,
while (rate->ipos <= (rate->opos >> 32)) {
ilast = *ibuf++;
rate->ipos++;
/* if ipos overflow, there is a infinite loop */
if (rate->ipos == 0xffffffff) {
rate->ipos = 1;
rate->opos = rate->opos & 0xffffffff;
}
/* See if we finished the input buffer yet */
if (ibuf >= iend) {
goto the_end;

View File

@@ -21,11 +21,10 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <SDL.h>
#include <SDL_thread.h>
#include "qemu/module.h"
#include "qemu-common.h"
#include "audio.h"
#ifndef _WIN32
@@ -42,14 +41,22 @@
typedef struct SDLVoiceOut {
HWVoiceOut hw;
int live;
int rpos;
int decr;
} SDLVoiceOut;
static struct {
int nb_samples;
} conf = {
.nb_samples = 1024
};
static struct SDLAudioState {
int exit;
SDL_mutex *mutex;
SDL_sem *sem;
int initialized;
bool driver_created;
Audiodev *dev;
} glob_sdl;
typedef struct SDLAudioState SDLAudioState;
@@ -64,19 +71,64 @@ static void GCC_FMT_ATTR (1, 2) sdl_logerr (const char *fmt, ...)
AUD_log (AUDIO_CAP, "Reason: %s\n", SDL_GetError ());
}
static int aud_to_sdlfmt (AudioFormat fmt)
static int sdl_lock (SDLAudioState *s, const char *forfn)
{
if (SDL_LockMutex (s->mutex)) {
sdl_logerr ("SDL_LockMutex for %s failed\n", forfn);
return -1;
}
return 0;
}
static int sdl_unlock (SDLAudioState *s, const char *forfn)
{
if (SDL_UnlockMutex (s->mutex)) {
sdl_logerr ("SDL_UnlockMutex for %s failed\n", forfn);
return -1;
}
return 0;
}
static int sdl_post (SDLAudioState *s, const char *forfn)
{
if (SDL_SemPost (s->sem)) {
sdl_logerr ("SDL_SemPost for %s failed\n", forfn);
return -1;
}
return 0;
}
static int sdl_wait (SDLAudioState *s, const char *forfn)
{
if (SDL_SemWait (s->sem)) {
sdl_logerr ("SDL_SemWait for %s failed\n", forfn);
return -1;
}
return 0;
}
static int sdl_unlock_and_post (SDLAudioState *s, const char *forfn)
{
if (sdl_unlock (s, forfn)) {
return -1;
}
return sdl_post (s, forfn);
}
static int aud_to_sdlfmt (audfmt_e fmt)
{
switch (fmt) {
case AUDIO_FORMAT_S8:
case AUD_FMT_S8:
return AUDIO_S8;
case AUDIO_FORMAT_U8:
case AUD_FMT_U8:
return AUDIO_U8;
case AUDIO_FORMAT_S16:
case AUD_FMT_S16:
return AUDIO_S16LSB;
case AUDIO_FORMAT_U16:
case AUD_FMT_U16:
return AUDIO_U16LSB;
default:
@@ -88,37 +140,37 @@ static int aud_to_sdlfmt (AudioFormat fmt)
}
}
static int sdl_to_audfmt(int sdlfmt, AudioFormat *fmt, int *endianness)
static int sdl_to_audfmt(int sdlfmt, audfmt_e *fmt, int *endianness)
{
switch (sdlfmt) {
case AUDIO_S8:
*endianness = 0;
*fmt = AUDIO_FORMAT_S8;
*fmt = AUD_FMT_S8;
break;
case AUDIO_U8:
*endianness = 0;
*fmt = AUDIO_FORMAT_U8;
*fmt = AUD_FMT_U8;
break;
case AUDIO_S16LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AUDIO_U16LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
case AUDIO_S16MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AUDIO_U16MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
default:
@@ -170,9 +222,9 @@ static int sdl_open (SDL_AudioSpec *req, SDL_AudioSpec *obt)
static void sdl_close (SDLAudioState *s)
{
if (s->initialized) {
SDL_LockAudio();
sdl_lock (s, "sdl_close");
s->exit = 1;
SDL_UnlockAudio();
sdl_unlock_and_post (s, "sdl_close");
SDL_PauseAudio (1);
SDL_CloseAudio ();
s->initialized = 0;
@@ -185,36 +237,57 @@ static void sdl_callback (void *opaque, Uint8 *buf, int len)
SDLAudioState *s = &glob_sdl;
HWVoiceOut *hw = &sdl->hw;
int samples = len >> hw->info.shift;
int to_mix, decr;
if (s->exit || !sdl->live) {
if (s->exit) {
return;
}
/* dolog ("in callback samples=%d live=%d\n", samples, sdl->live); */
while (samples) {
int to_mix, decr;
to_mix = audio_MIN(samples, sdl->live);
decr = to_mix;
while (to_mix) {
int chunk = audio_MIN(to_mix, hw->samples - hw->rpos);
struct st_sample *src = hw->mix_buf + hw->rpos;
/* dolog ("in callback samples=%d\n", samples); */
sdl_wait (s, "sdl_callback");
if (s->exit) {
return;
}
/* dolog ("in callback to_mix %d, chunk %d\n", to_mix, chunk); */
hw->clip(buf, src, chunk);
hw->rpos = (hw->rpos + chunk) % hw->samples;
to_mix -= chunk;
buf += chunk << hw->info.shift;
if (sdl_lock (s, "sdl_callback")) {
return;
}
if (audio_bug (AUDIO_FUNC, sdl->live < 0 || sdl->live > hw->samples)) {
dolog ("sdl->live=%d hw->samples=%d\n",
sdl->live, hw->samples);
return;
}
if (!sdl->live) {
goto again;
}
/* dolog ("in callback live=%d\n", live); */
to_mix = audio_MIN (samples, sdl->live);
decr = to_mix;
while (to_mix) {
int chunk = audio_MIN (to_mix, hw->samples - hw->rpos);
struct st_sample *src = hw->mix_buf + hw->rpos;
/* dolog ("in callback to_mix %d, chunk %d\n", to_mix, chunk); */
hw->clip (buf, src, chunk);
sdl->rpos = (sdl->rpos + chunk) % hw->samples;
to_mix -= chunk;
buf += chunk << hw->info.shift;
}
samples -= decr;
sdl->live -= decr;
sdl->decr += decr;
again:
if (sdl_unlock (s, "sdl_callback")) {
return;
}
}
samples -= decr;
sdl->live -= decr;
sdl->decr += decr;
/* dolog ("done len=%d\n", len); */
/* SDL2 does not clear the remaining buffer for us, so do it on our own */
if (samples) {
memset(buf, 0, samples << hw->info.shift);
}
}
static int sdl_write_out (SWVoiceOut *sw, void *buf, int len)
@@ -226,8 +299,11 @@ static int sdl_run_out (HWVoiceOut *hw, int live)
{
int decr;
SDLVoiceOut *sdl = (SDLVoiceOut *) hw;
SDLAudioState *s = &glob_sdl;
SDL_LockAudio();
if (sdl_lock (s, "sdl_run_out")) {
return 0;
}
if (sdl->decr > live) {
ldebug ("sdl->decr %d live %d sdl->live %d\n",
@@ -239,10 +315,15 @@ static int sdl_run_out (HWVoiceOut *hw, int live)
decr = audio_MIN (sdl->decr, live);
sdl->decr -= decr;
sdl->live = live;
SDL_UnlockAudio();
sdl->live = live - decr;
hw->rpos = sdl->rpos;
if (sdl->live > 0) {
sdl_unlock_and_post (s, "sdl_run_out");
}
else {
sdl_unlock (s, "sdl_run_out");
}
return decr;
}
@@ -261,13 +342,13 @@ static int sdl_init_out(HWVoiceOut *hw, struct audsettings *as,
SDL_AudioSpec req, obt;
int endianness;
int err;
AudioFormat effective_fmt;
audfmt_e effective_fmt;
struct audsettings obt_as;
req.freq = as->freq;
req.format = aud_to_sdlfmt (as->fmt);
req.channels = as->nchannels;
req.samples = audio_buffer_samples(s->dev->u.sdl.out, as, 11610);
req.samples = conf.nb_samples;
req.callback = sdl_callback;
req.userdata = sdl;
@@ -311,7 +392,7 @@ static int sdl_ctl_out (HWVoiceOut *hw, int cmd, ...)
return 0;
}
static void *sdl_audio_init(Audiodev *dev)
static void *sdl_audio_init (void)
{
SDLAudioState *s = &glob_sdl;
if (s->driver_created) {
@@ -324,8 +405,22 @@ static void *sdl_audio_init(Audiodev *dev)
return NULL;
}
s->mutex = SDL_CreateMutex ();
if (!s->mutex) {
sdl_logerr ("Failed to create SDL mutex\n");
SDL_QuitSubSystem (SDL_INIT_AUDIO);
return NULL;
}
s->sem = SDL_CreateSemaphore (0);
if (!s->sem) {
sdl_logerr ("Failed to create SDL semaphore\n");
SDL_DestroyMutex (s->mutex);
SDL_QuitSubSystem (SDL_INIT_AUDIO);
return NULL;
}
s->driver_created = true;
s->dev = dev;
return s;
}
@@ -333,11 +428,22 @@ static void sdl_audio_fini (void *opaque)
{
SDLAudioState *s = opaque;
sdl_close (s);
SDL_DestroySemaphore (s->sem);
SDL_DestroyMutex (s->mutex);
SDL_QuitSubSystem (SDL_INIT_AUDIO);
s->driver_created = false;
s->dev = NULL;
}
static struct audio_option sdl_options[] = {
{
.name = "SAMPLES",
.tag = AUD_OPT_INT,
.valp = &conf.nb_samples,
.descr = "Size of SDL buffer in samples"
},
{ /* End of list */ }
};
static struct audio_pcm_ops sdl_pcm_ops = {
.init_out = sdl_init_out,
.fini_out = sdl_fini_out,
@@ -346,9 +452,10 @@ static struct audio_pcm_ops sdl_pcm_ops = {
.ctl_out = sdl_ctl_out,
};
static struct audio_driver sdl_audio_driver = {
struct audio_driver sdl_audio_driver = {
.name = "sdl",
.descr = "SDL http://www.libsdl.org",
.options = sdl_options,
.init = sdl_audio_init,
.fini = sdl_audio_fini,
.pcm_ops = &sdl_pcm_ops,
@@ -358,9 +465,3 @@ static struct audio_driver sdl_audio_driver = {
.voice_size_out = sizeof (SDLVoiceOut),
.voice_size_in = 0
};
static void register_audio_sdl(void)
{
audio_driver_register(&sdl_audio_driver);
}
type_init(register_audio_sdl);

View File

@@ -19,8 +19,6 @@
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "qemu/host-utils.h"
#include "qemu/module.h"
#include "qemu/error-report.h"
#include "qemu/timer.h"
#include "ui/qemu-spice.h"
@@ -78,7 +76,7 @@ static const SpiceRecordInterface record_sif = {
.base.minor_version = SPICE_INTERFACE_RECORD_MINOR,
};
static void *spice_audio_init(Audiodev *dev)
static void *spice_audio_init (void)
{
if (!using_spice) {
return NULL;
@@ -131,7 +129,7 @@ static int line_out_init(HWVoiceOut *hw, struct audsettings *as,
settings.freq = SPICE_INTERFACE_PLAYBACK_FREQ;
#endif
settings.nchannels = SPICE_INTERFACE_PLAYBACK_CHAN;
settings.fmt = AUDIO_FORMAT_S16;
settings.fmt = AUD_FMT_S16;
settings.endianness = AUDIO_HOST_ENDIANNESS;
audio_pcm_init_info (&hw->info, &settings);
@@ -259,7 +257,7 @@ static int line_in_init(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
settings.freq = SPICE_INTERFACE_RECORD_FREQ;
#endif
settings.nchannels = SPICE_INTERFACE_RECORD_CHAN;
settings.fmt = AUDIO_FORMAT_S16;
settings.fmt = AUD_FMT_S16;
settings.endianness = AUDIO_HOST_ENDIANNESS;
audio_pcm_init_info (&hw->info, &settings);
@@ -374,6 +372,10 @@ static int line_in_ctl (HWVoiceIn *hw, int cmd, ...)
return 0;
}
static struct audio_option audio_options[] = {
{ /* end of list */ },
};
static struct audio_pcm_ops audio_callbacks = {
.init_out = line_out_init,
.fini_out = line_out_fini,
@@ -388,9 +390,10 @@ static struct audio_pcm_ops audio_callbacks = {
.ctl_in = line_in_ctl,
};
static struct audio_driver spice_audio_driver = {
struct audio_driver spice_audio_driver = {
.name = "spice",
.descr = "spice audio driver",
.options = audio_options,
.init = spice_audio_init,
.fini = spice_audio_fini,
.pcm_ops = &audio_callbacks,
@@ -407,9 +410,3 @@ void qemu_spice_audio_init (void)
{
spice_audio_driver.can_be_default = 1;
}
static void register_audio_spice(void)
{
audio_driver_register(&spice_audio_driver);
}
type_init(register_audio_spice);

View File

@@ -1,22 +0,0 @@
# See docs/devel/tracing.txt for syntax documentation.
# alsaaudio.c
alsa_revents(int revents) "revents = %d"
alsa_pollout(int i, int fd) "i = %d fd = %d"
alsa_set_handler(int events, int index, int fd, int err) "events=0x%x index=%d fd=%d err=%d"
alsa_wrote_zero(int len) "Failed to write %d frames (wrote zero)"
alsa_read_zero(long len) "Failed to read %ld frames (read zero)"
alsa_xrun_out(void) "Recovering from playback xrun"
alsa_xrun_in(void) "Recovering from capture xrun"
alsa_resume_out(void) "Resuming suspended output stream"
alsa_resume_in(void) "Resuming suspended input stream"
alsa_no_frames(int state) "No frames available and ALSA state is %d"
# ossaudio.c
oss_version(int version) "OSS version = 0x%x"
oss_invalid_available_size(int size, int bufsize) "Invalid available size, size=%d bufsize=%d"
# audio.c
audio_timer_start(int interval) "interval %d ms"
audio_timer_stop(void) ""
audio_timer_delayed(int interval) "interval %d ms"

View File

@@ -21,12 +21,9 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/host-utils.h"
#include "qemu/module.h"
#include "hw/hw.h"
#include "qemu/timer.h"
#include "qapi/opts-visitor.h"
#include "audio.h"
#define AUDIO_CAP "wav"
@@ -40,6 +37,11 @@ typedef struct WAVVoiceOut {
int total_samples;
} WAVVoiceOut;
typedef struct {
struct audsettings settings;
const char *wav_path;
} WAVConf;
static int wav_run_out (HWVoiceOut *hw, int live)
{
WAVVoiceOut *wav = (WAVVoiceOut *) hw;
@@ -110,30 +112,25 @@ static int wav_init_out(HWVoiceOut *hw, struct audsettings *as,
0x02, 0x00, 0x44, 0xac, 0x00, 0x00, 0x10, 0xb1, 0x02, 0x00, 0x04,
0x00, 0x10, 0x00, 0x64, 0x61, 0x74, 0x61, 0x00, 0x00, 0x00, 0x00
};
Audiodev *dev = drv_opaque;
AudiodevWavOptions *wopts = &dev->u.wav;
struct audsettings wav_as = audiodev_to_audsettings(dev->u.wav.out);
const char *wav_path = wopts->has_path ? wopts->path : "qemu.wav";
WAVConf *conf = drv_opaque;
struct audsettings wav_as = conf->settings;
stereo = wav_as.nchannels == 2;
switch (wav_as.fmt) {
case AUDIO_FORMAT_S8:
case AUDIO_FORMAT_U8:
case AUD_FMT_S8:
case AUD_FMT_U8:
bits16 = 0;
break;
case AUDIO_FORMAT_S16:
case AUDIO_FORMAT_U16:
case AUD_FMT_S16:
case AUD_FMT_U16:
bits16 = 1;
break;
case AUDIO_FORMAT_S32:
case AUDIO_FORMAT_U32:
case AUD_FMT_S32:
case AUD_FMT_U32:
dolog ("WAVE files can not handle 32bit formats\n");
return -1;
default:
abort();
}
hdr[34] = bits16 ? 0x10 : 0x08;
@@ -142,7 +139,7 @@ static int wav_init_out(HWVoiceOut *hw, struct audsettings *as,
audio_pcm_init_info (&hw->info, &wav_as);
hw->samples = 1024;
wav->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
wav->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
if (!wav->pcm_buf) {
dolog ("Could not allocate buffer (%d bytes)\n",
hw->samples << hw->info.shift);
@@ -154,10 +151,10 @@ static int wav_init_out(HWVoiceOut *hw, struct audsettings *as,
le_store (hdr + 28, hw->info.freq << (bits16 + stereo), 4);
le_store (hdr + 32, 1 << (bits16 + stereo), 2);
wav->f = fopen(wav_path, "wb");
wav->f = fopen (conf->wav_path, "wb");
if (!wav->f) {
dolog ("Failed to open wave file `%s'\nReason: %s\n",
wav_path, strerror(errno));
conf->wav_path, strerror (errno));
g_free (wav->pcm_buf);
wav->pcm_buf = NULL;
return -1;
@@ -225,17 +222,54 @@ static int wav_ctl_out (HWVoiceOut *hw, int cmd, ...)
return 0;
}
static void *wav_audio_init(Audiodev *dev)
static WAVConf glob_conf = {
.settings.freq = 44100,
.settings.nchannels = 2,
.settings.fmt = AUD_FMT_S16,
.wav_path = "qemu.wav"
};
static void *wav_audio_init (void)
{
assert(dev->driver == AUDIODEV_DRIVER_WAV);
return dev;
WAVConf *conf = g_malloc(sizeof(WAVConf));
*conf = glob_conf;
return conf;
}
static void wav_audio_fini (void *opaque)
{
ldebug ("wav_fini");
g_free(opaque);
}
static struct audio_option wav_options[] = {
{
.name = "FREQUENCY",
.tag = AUD_OPT_INT,
.valp = &glob_conf.settings.freq,
.descr = "Frequency"
},
{
.name = "FORMAT",
.tag = AUD_OPT_FMT,
.valp = &glob_conf.settings.fmt,
.descr = "Format"
},
{
.name = "DAC_FIXED_CHANNELS",
.tag = AUD_OPT_INT,
.valp = &glob_conf.settings.nchannels,
.descr = "Number of channels (1 - mono, 2 - stereo)"
},
{
.name = "PATH",
.tag = AUD_OPT_STR,
.valp = &glob_conf.wav_path,
.descr = "Path to wave file"
},
{ /* End of list */ }
};
static struct audio_pcm_ops wav_pcm_ops = {
.init_out = wav_init_out,
.fini_out = wav_fini_out,
@@ -244,9 +278,10 @@ static struct audio_pcm_ops wav_pcm_ops = {
.ctl_out = wav_ctl_out,
};
static struct audio_driver wav_audio_driver = {
struct audio_driver wav_audio_driver = {
.name = "wav",
.descr = "WAV renderer http://wikipedia.org/wiki/WAV",
.options = wav_options,
.init = wav_audio_init,
.fini = wav_audio_fini,
.pcm_ops = &wav_pcm_ops,
@@ -256,9 +291,3 @@ static struct audio_driver wav_audio_driver = {
.voice_size_out = sizeof (WAVVoiceOut),
.voice_size_in = 0
};
static void register_audio_wav(void)
{
audio_driver_register(&wav_audio_driver);
}
type_init(register_audio_wav);

View File

@@ -1,7 +1,6 @@
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "monitor/monitor.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "audio.h"
@@ -38,29 +37,30 @@ static void wav_destroy (void *opaque)
uint8_t dlen[4];
uint32_t datalen = wav->bytes;
uint32_t rifflen = datalen + 36;
Monitor *mon = cur_mon;
if (wav->f) {
le_store (rlen, rifflen, 4);
le_store (dlen, datalen, 4);
if (fseek (wav->f, 4, SEEK_SET)) {
error_report("wav_destroy: rlen fseek failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: rlen fseek failed\nReason: %s\n",
strerror (errno));
goto doclose;
}
if (fwrite (rlen, 4, 1, wav->f) != 1) {
error_report("wav_destroy: rlen fwrite failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: rlen fwrite failed\nReason %s\n",
strerror (errno));
goto doclose;
}
if (fseek (wav->f, 32, SEEK_CUR)) {
error_report("wav_destroy: dlen fseek failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: dlen fseek failed\nReason %s\n",
strerror (errno));
goto doclose;
}
if (fwrite (dlen, 1, 4, wav->f) != 4) {
error_report("wav_destroy: dlen fwrite failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: dlen fwrite failed\nReason %s\n",
strerror (errno));
goto doclose;
}
doclose:
@@ -77,7 +77,8 @@ static void wav_capture (void *opaque, void *buf, int size)
WAVState *wav = opaque;
if (fwrite (buf, size, 1, wav->f) != 1) {
error_report("wav_capture: fwrite error: %s", strerror(errno));
monitor_printf (cur_mon, "wav_capture: fwrite error\nReason: %s",
strerror (errno));
}
wav->bytes += size;
}
@@ -87,7 +88,6 @@ static void wav_capture_destroy (void *opaque)
WAVState *wav = opaque;
AUD_del_capture (wav->cap, wav);
g_free (wav);
}
static void wav_capture_info (void *opaque)
@@ -108,6 +108,7 @@ static struct capture_ops wav_capture_ops = {
int wav_start_capture (CaptureState *s, const char *path, int freq,
int bits, int nchannels)
{
Monitor *mon = cur_mon;
WAVState *wav;
uint8_t hdr[] = {
0x52, 0x49, 0x46, 0x46, 0x00, 0x00, 0x00, 0x00, 0x57, 0x41, 0x56,
@@ -121,13 +122,13 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
CaptureVoiceOut *cap;
if (bits != 8 && bits != 16) {
error_report("incorrect bit count %d, must be 8 or 16", bits);
monitor_printf (mon, "incorrect bit count %d, must be 8 or 16\n", bits);
return -1;
}
if (nchannels != 1 && nchannels != 2) {
error_report("incorrect channel count %d, must be 1 or 2",
nchannels);
monitor_printf (mon, "incorrect channel count %d, must be 1 or 2\n",
nchannels);
return -1;
}
@@ -136,7 +137,7 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
as.freq = freq;
as.nchannels = 1 << stereo;
as.fmt = bits16 ? AUDIO_FORMAT_S16 : AUDIO_FORMAT_U8;
as.fmt = bits16 ? AUD_FMT_S16 : AUD_FMT_U8;
as.endianness = 0;
ops.notify = wav_notify;
@@ -155,8 +156,8 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
wav->f = fopen (path, "wb");
if (!wav->f) {
error_report("Failed to open wave file `%s': %s",
path, strerror(errno));
monitor_printf (mon, "Failed to open wave file `%s'\nReason: %s\n",
path, strerror (errno));
g_free (wav);
return -1;
}
@@ -167,13 +168,14 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
wav->freq = freq;
if (fwrite (hdr, sizeof (hdr), 1, wav->f) != 1) {
error_report("Failed to write header: %s", strerror(errno));
monitor_printf (mon, "Failed to write header\nReason: %s\n",
strerror (errno));
goto error_free;
}
cap = AUD_add_capture (&as, &ops, wav);
if (!cap) {
error_report("Failed to add audio capture");
monitor_printf (mon, "Failed to add audio capture\n");
goto error_free;
}
@@ -185,7 +187,8 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
error_free:
g_free (wav->path);
if (fclose (wav->f)) {
error_report("Failed to close wave file: %s", strerror(errno));
monitor_printf (mon, "Failed to close wave file\nReason: %s\n",
strerror (errno));
}
g_free (wav);
return -1;

View File

@@ -1,7 +0,0 @@
authz-obj-y += base.o
authz-obj-y += simple.o
authz-obj-y += list.o
authz-obj-y += listfile.o
authz-obj-$(CONFIG_AUTH_PAM) += pamacct.o
pamacct.o-libs = -lpam

View File

@@ -1,83 +0,0 @@
/*
* QEMU authorization framework base class
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/base.h"
#include "qemu/module.h"
#include "trace.h"
bool qauthz_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZClass *cls = QAUTHZ_GET_CLASS(authz);
bool allowed;
allowed = cls->is_allowed(authz, identity, errp);
trace_qauthz_is_allowed(authz, identity, allowed);
return allowed;
}
bool qauthz_is_allowed_by_id(const char *authzid,
const char *identity,
Error **errp)
{
QAuthZ *authz;
Object *obj;
Object *container;
container = object_get_objects_root();
obj = object_resolve_path_component(container,
authzid);
if (!obj) {
error_setg(errp, "Cannot find QAuthZ object ID %s",
authzid);
return false;
}
if (!object_dynamic_cast(obj, TYPE_QAUTHZ)) {
error_setg(errp, "Object '%s' is not a QAuthZ subclass",
authzid);
return false;
}
authz = QAUTHZ(obj);
return qauthz_is_allowed(authz, identity, errp);
}
static const TypeInfo authz_info = {
.parent = TYPE_OBJECT,
.name = TYPE_QAUTHZ,
.instance_size = sizeof(QAuthZ),
.class_size = sizeof(QAuthZClass),
.abstract = true,
};
static void qauthz_register_types(void)
{
type_register_static(&authz_info);
}
type_init(qauthz_register_types)

View File

@@ -1,272 +0,0 @@
/*
* QEMU access control list authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/list.h"
#include "trace.h"
#include "qom/object_interfaces.h"
#include "qapi/qapi-visit-authz.h"
#include "qemu/module.h"
static bool qauthz_list_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(authz);
QAuthZListRuleList *rules = lauthz->rules;
while (rules) {
QAuthZListRule *rule = rules->value;
QAuthZListFormat format = rule->has_format ? rule->format :
QAUTHZ_LIST_FORMAT_EXACT;
trace_qauthz_list_check_rule(authz, rule->match, identity,
format, rule->policy);
switch (format) {
case QAUTHZ_LIST_FORMAT_EXACT:
if (g_str_equal(rule->match, identity)) {
return rule->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
break;
case QAUTHZ_LIST_FORMAT_GLOB:
if (g_pattern_match_simple(rule->match, identity)) {
return rule->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
break;
default:
g_warn_if_reached();
return false;
}
rules = rules->next;
}
trace_qauthz_list_default_policy(authz, identity, lauthz->policy);
return lauthz->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
static void
qauthz_list_prop_set_policy(Object *obj,
int value,
Error **errp G_GNUC_UNUSED)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
lauthz->policy = value;
}
static int
qauthz_list_prop_get_policy(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
return lauthz->policy;
}
static void
qauthz_list_prop_get_rules(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
visit_type_QAuthZListRuleList(v, name, &lauthz->rules, errp);
}
static void
qauthz_list_prop_set_rules(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
QAuthZListRuleList *oldrules;
oldrules = lauthz->rules;
visit_type_QAuthZListRuleList(v, name, &lauthz->rules, errp);
qapi_free_QAuthZListRuleList(oldrules);
}
static void
qauthz_list_finalize(Object *obj)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
qapi_free_QAuthZListRuleList(lauthz->rules);
}
static void
qauthz_list_class_init(ObjectClass *oc, void *data)
{
QAuthZClass *authz = QAUTHZ_CLASS(oc);
object_class_property_add_enum(oc, "policy",
"QAuthZListPolicy",
&QAuthZListPolicy_lookup,
qauthz_list_prop_get_policy,
qauthz_list_prop_set_policy,
NULL);
object_class_property_add(oc, "rules", "QAuthZListRule",
qauthz_list_prop_get_rules,
qauthz_list_prop_set_rules,
NULL, NULL, NULL);
authz->is_allowed = qauthz_list_is_allowed;
}
QAuthZList *qauthz_list_new(const char *id,
QAuthZListPolicy policy,
Error **errp)
{
return QAUTHZ_LIST(
object_new_with_props(TYPE_QAUTHZ_LIST,
object_get_objects_root(),
id, errp,
"policy", QAuthZListPolicy_str(policy),
NULL));
}
ssize_t qauthz_list_append_rule(QAuthZList *auth,
const char *match,
QAuthZListPolicy policy,
QAuthZListFormat format,
Error **errp)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *tmp;
size_t i = 0;
rule = g_new0(QAuthZListRule, 1);
rule->policy = policy;
rule->match = g_strdup(match);
rule->format = format;
rule->has_format = true;
tmp = g_new0(QAuthZListRuleList, 1);
tmp->value = rule;
rules = auth->rules;
if (rules) {
while (rules->next) {
i++;
rules = rules->next;
}
rules->next = tmp;
return i + 1;
} else {
auth->rules = tmp;
return 0;
}
}
ssize_t qauthz_list_insert_rule(QAuthZList *auth,
const char *match,
QAuthZListPolicy policy,
QAuthZListFormat format,
size_t index,
Error **errp)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *tmp;
size_t i = 0;
rule = g_new0(QAuthZListRule, 1);
rule->policy = policy;
rule->match = g_strdup(match);
rule->format = format;
rule->has_format = true;
tmp = g_new0(QAuthZListRuleList, 1);
tmp->value = rule;
rules = auth->rules;
if (rules && index > 0) {
while (rules->next && i < (index - 1)) {
i++;
rules = rules->next;
}
tmp->next = rules->next;
rules->next = tmp;
return i + 1;
} else {
tmp->next = auth->rules;
auth->rules = tmp;
return 0;
}
}
ssize_t qauthz_list_delete_rule(QAuthZList *auth, const char *match)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *prev;
size_t i = 0;
prev = NULL;
rules = auth->rules;
while (rules) {
rule = rules->value;
if (g_str_equal(rule->match, match)) {
if (prev) {
prev->next = rules->next;
} else {
auth->rules = rules->next;
}
rules->next = NULL;
qapi_free_QAuthZListRuleList(rules);
return i;
}
prev = rules;
rules = rules->next;
i++;
}
return -1;
}
static const TypeInfo qauthz_list_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_LIST,
.instance_size = sizeof(QAuthZList),
.instance_finalize = qauthz_list_finalize,
.class_size = sizeof(QAuthZListClass),
.class_init = qauthz_list_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_list_register_types(void)
{
type_register_static(&qauthz_list_info);
}
type_init(qauthz_list_register_types);

View File

@@ -1,284 +0,0 @@
/*
* QEMU access control list file authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/listfile.h"
#include "trace.h"
#include "qemu/error-report.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
#include "qemu/sockets.h"
#include "qemu/filemonitor.h"
#include "qom/object_interfaces.h"
#include "qapi/qapi-visit-authz.h"
#include "qapi/qmp/qjson.h"
#include "qapi/qmp/qobject.h"
#include "qapi/qmp/qerror.h"
#include "qapi/qobject-input-visitor.h"
static bool
qauthz_list_file_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(authz);
if (fauthz->list) {
return qauthz_is_allowed(fauthz->list, identity, errp);
}
return false;
}
static QAuthZ *
qauthz_list_file_load(QAuthZListFile *fauthz, Error **errp)
{
GError *err = NULL;
gchar *content = NULL;
gsize len;
QObject *obj = NULL;
QDict *pdict;
Visitor *v = NULL;
QAuthZ *ret = NULL;
trace_qauthz_list_file_load(fauthz, fauthz->filename);
if (!g_file_get_contents(fauthz->filename, &content, &len, &err)) {
error_setg(errp, "Unable to read '%s': %s",
fauthz->filename, err->message);
goto cleanup;
}
obj = qobject_from_json(content, errp);
if (!obj) {
goto cleanup;
}
pdict = qobject_to(QDict, obj);
if (!pdict) {
error_setg(errp, QERR_INVALID_PARAMETER_TYPE, "obj", "dict");
goto cleanup;
}
v = qobject_input_visitor_new(obj);
ret = (QAuthZ *)user_creatable_add_type(TYPE_QAUTHZ_LIST,
NULL, pdict, v, errp);
cleanup:
visit_free(v);
qobject_unref(obj);
if (err) {
g_error_free(err);
}
g_free(content);
return ret;
}
static void
qauthz_list_file_event(int64_t wd G_GNUC_UNUSED,
QFileMonitorEvent ev G_GNUC_UNUSED,
const char *name G_GNUC_UNUSED,
void *opaque)
{
QAuthZListFile *fauthz = opaque;
Error *err = NULL;
if (ev != QFILE_MONITOR_EVENT_MODIFIED &&
ev != QFILE_MONITOR_EVENT_CREATED) {
return;
}
object_unref(OBJECT(fauthz->list));
fauthz->list = qauthz_list_file_load(fauthz, &err);
trace_qauthz_list_file_refresh(fauthz,
fauthz->filename, fauthz->list ? 1 : 0);
if (!fauthz->list) {
error_report_err(err);
}
}
static void
qauthz_list_file_complete(UserCreatable *uc, Error **errp)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(uc);
gchar *dir = NULL, *file = NULL;
fauthz->list = qauthz_list_file_load(fauthz, errp);
if (!fauthz->refresh) {
return;
}
fauthz->file_monitor = qemu_file_monitor_new(errp);
if (!fauthz->file_monitor) {
return;
}
dir = g_path_get_dirname(fauthz->filename);
if (g_str_equal(dir, ".")) {
error_setg(errp, "Filename must be an absolute path");
goto cleanup;
}
file = g_path_get_basename(fauthz->filename);
if (g_str_equal(file, ".")) {
error_setg(errp, "Path has no trailing filename component");
goto cleanup;
}
fauthz->file_watch = qemu_file_monitor_add_watch(
fauthz->file_monitor, dir, file,
qauthz_list_file_event, fauthz, errp);
if (fauthz->file_watch < 0) {
goto cleanup;
}
cleanup:
g_free(file);
g_free(dir);
}
static void
qauthz_list_file_prop_set_filename(Object *obj,
const char *value,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
g_free(fauthz->filename);
fauthz->filename = g_strdup(value);
}
static char *
qauthz_list_file_prop_get_filename(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
return g_strdup(fauthz->filename);
}
static void
qauthz_list_file_prop_set_refresh(Object *obj,
bool value,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
fauthz->refresh = value;
}
static bool
qauthz_list_file_prop_get_refresh(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
return fauthz->refresh;
}
static void
qauthz_list_file_finalize(Object *obj)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
object_unref(OBJECT(fauthz->list));
g_free(fauthz->filename);
qemu_file_monitor_free(fauthz->file_monitor);
}
static void
qauthz_list_file_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
QAuthZClass *authz = QAUTHZ_CLASS(oc);
ucc->complete = qauthz_list_file_complete;
object_class_property_add_str(oc, "filename",
qauthz_list_file_prop_get_filename,
qauthz_list_file_prop_set_filename,
NULL);
object_class_property_add_bool(oc, "refresh",
qauthz_list_file_prop_get_refresh,
qauthz_list_file_prop_set_refresh,
NULL);
authz->is_allowed = qauthz_list_file_is_allowed;
}
static void
qauthz_list_file_init(Object *obj)
{
QAuthZListFile *authz = QAUTHZ_LIST_FILE(obj);
authz->file_watch = -1;
#ifdef CONFIG_INOTIFY1
authz->refresh = TRUE;
#endif
}
QAuthZListFile *qauthz_list_file_new(const char *id,
const char *filename,
bool refresh,
Error **errp)
{
return QAUTHZ_LIST_FILE(
object_new_with_props(TYPE_QAUTHZ_LIST_FILE,
object_get_objects_root(),
id, errp,
"filename", filename,
"refresh", refresh ? "yes" : "no",
NULL));
}
static const TypeInfo qauthz_list_file_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_LIST_FILE,
.instance_init = qauthz_list_file_init,
.instance_size = sizeof(QAuthZListFile),
.instance_finalize = qauthz_list_file_finalize,
.class_size = sizeof(QAuthZListFileClass),
.class_init = qauthz_list_file_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_list_file_register_types(void)
{
type_register_static(&qauthz_list_file_info);
}
type_init(qauthz_list_file_register_types);

View File

@@ -1,149 +0,0 @@
/*
* QEMU PAM authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/pamacct.h"
#include "trace.h"
#include "qemu/module.h"
#include "qom/object_interfaces.h"
#include <security/pam_appl.h>
static bool qauthz_pam_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(authz);
const struct pam_conv pam_conversation = { 0 };
pam_handle_t *pamh = NULL;
int ret;
trace_qauthz_pam_check(authz, identity, pauthz->service);
ret = pam_start(pauthz->service,
identity,
&pam_conversation,
&pamh);
if (ret != PAM_SUCCESS) {
error_setg(errp, "Unable to start PAM transaction: %s",
pam_strerror(NULL, ret));
return false;
}
ret = pam_acct_mgmt(pamh, PAM_SILENT);
pam_end(pamh, ret);
if (ret != PAM_SUCCESS) {
error_setg(errp, "Unable to authorize user '%s': %s",
identity, pam_strerror(pamh, ret));
return false;
}
return true;
}
static void
qauthz_pam_prop_set_service(Object *obj,
const char *service,
Error **errp G_GNUC_UNUSED)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
g_free(pauthz->service);
pauthz->service = g_strdup(service);
}
static char *
qauthz_pam_prop_get_service(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
return g_strdup(pauthz->service);
}
static void
qauthz_pam_complete(UserCreatable *uc, Error **errp)
{
}
static void
qauthz_pam_finalize(Object *obj)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
g_free(pauthz->service);
}
static void
qauthz_pam_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
QAuthZClass *authz = QAUTHZ_CLASS(oc);
ucc->complete = qauthz_pam_complete;
authz->is_allowed = qauthz_pam_is_allowed;
object_class_property_add_str(oc, "service",
qauthz_pam_prop_get_service,
qauthz_pam_prop_set_service,
NULL);
}
QAuthZPAM *qauthz_pam_new(const char *id,
const char *service,
Error **errp)
{
return QAUTHZ_PAM(
object_new_with_props(TYPE_QAUTHZ_PAM,
object_get_objects_root(),
id, errp,
"service", service,
NULL));
}
static const TypeInfo qauthz_pam_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_PAM,
.instance_size = sizeof(QAuthZPAM),
.instance_finalize = qauthz_pam_finalize,
.class_size = sizeof(QAuthZPAMClass),
.class_init = qauthz_pam_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_pam_register_types(void)
{
type_register_static(&qauthz_pam_info);
}
type_init(qauthz_pam_register_types);

View File

@@ -1,116 +0,0 @@
/*
* QEMU simple authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/simple.h"
#include "trace.h"
#include "qemu/module.h"
#include "qom/object_interfaces.h"
static bool qauthz_simple_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(authz);
trace_qauthz_simple_is_allowed(authz, sauthz->identity, identity);
return g_str_equal(identity, sauthz->identity);
}
static void
qauthz_simple_prop_set_identity(Object *obj,
const char *value,
Error **errp G_GNUC_UNUSED)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
g_free(sauthz->identity);
sauthz->identity = g_strdup(value);
}
static char *
qauthz_simple_prop_get_identity(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
return g_strdup(sauthz->identity);
}
static void
qauthz_simple_finalize(Object *obj)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
g_free(sauthz->identity);
}
static void
qauthz_simple_class_init(ObjectClass *oc, void *data)
{
QAuthZClass *authz = QAUTHZ_CLASS(oc);
authz->is_allowed = qauthz_simple_is_allowed;
object_class_property_add_str(oc, "identity",
qauthz_simple_prop_get_identity,
qauthz_simple_prop_set_identity,
NULL);
}
QAuthZSimple *qauthz_simple_new(const char *id,
const char *identity,
Error **errp)
{
return QAUTHZ_SIMPLE(
object_new_with_props(TYPE_QAUTHZ_SIMPLE,
object_get_objects_root(),
id, errp,
"identity", identity,
NULL));
}
static const TypeInfo qauthz_simple_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_SIMPLE,
.instance_size = sizeof(QAuthZSimple),
.instance_finalize = qauthz_simple_finalize,
.class_size = sizeof(QAuthZSimpleClass),
.class_init = qauthz_simple_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_simple_register_types(void)
{
type_register_static(&qauthz_simple_info);
}
type_init(qauthz_simple_register_types);

View File

@@ -1,18 +0,0 @@
# See docs/devel/tracing.txt for syntax documentation.
# base.c
qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d"
# simple.c
qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s"
# list.c
qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d"
qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d"
# listfile.c
qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s"
qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"
# pamacct.c
qauthz_pam_check(void *authz, const char *identity, const char *service) "AuthZ PAM %p identity=%s service=%s"

View File

@@ -1,19 +1,11 @@
common-obj-y += rng.o rng-egd.o
common-obj-$(CONFIG_POSIX) += rng-random.o
common-obj-y += msmouse.o testdev.o
common-obj-$(CONFIG_BRLAPI) += baum.o
baum.o-cflags := $(SDL_CFLAGS)
common-obj-$(CONFIG_TPM) += tpm.o
common-obj-y += hostmem.o hostmem-ram.o
common-obj-$(CONFIG_POSIX) += hostmem-file.o
common-obj-y += cryptodev.o
common-obj-y += cryptodev-builtin.o
ifeq ($(CONFIG_VIRTIO_CRYPTO),y)
common-obj-y += cryptodev-vhost.o
common-obj-$(CONFIG_VHOST_CRYPTO) += cryptodev-vhost-user.o
endif
common-obj-$(call land,$(CONFIG_VHOST_USER),$(CONFIG_VIRTIO)) += vhost-user.o
common-obj-$(CONFIG_LINUX) += hostmem-memfd.o
common-obj-$(CONFIG_LINUX) += hostmem-file.o

649
backends/baum.c Normal file
View File

@@ -0,0 +1,649 @@
/*
* QEMU Baum Braille Device
*
* Copyright (c) 2008 Samuel Thibault
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu-common.h"
#include "sysemu/char.h"
#include "qemu/timer.h"
#include "hw/usb.h"
#include <brlapi.h>
#include <brlapi_constants.h>
#include <brlapi_keycodes.h>
#ifdef CONFIG_SDL
#include <SDL_syswm.h>
#endif
#if 0
#define DPRINTF(fmt, ...) \
printf(fmt, ## __VA_ARGS__)
#else
#define DPRINTF(fmt, ...)
#endif
#define ESC 0x1B
#define BAUM_REQ_DisplayData 0x01
#define BAUM_REQ_GetVersionNumber 0x05
#define BAUM_REQ_GetKeys 0x08
#define BAUM_REQ_SetMode 0x12
#define BAUM_REQ_SetProtocol 0x15
#define BAUM_REQ_GetDeviceIdentity 0x84
#define BAUM_REQ_GetSerialNumber 0x8A
#define BAUM_RSP_CellCount 0x01
#define BAUM_RSP_VersionNumber 0x05
#define BAUM_RSP_ModeSetting 0x11
#define BAUM_RSP_CommunicationChannel 0x16
#define BAUM_RSP_PowerdownSignal 0x17
#define BAUM_RSP_HorizontalSensors 0x20
#define BAUM_RSP_VerticalSensors 0x21
#define BAUM_RSP_RoutingKeys 0x22
#define BAUM_RSP_Switches 0x23
#define BAUM_RSP_TopKeys 0x24
#define BAUM_RSP_HorizontalSensor 0x25
#define BAUM_RSP_VerticalSensor 0x26
#define BAUM_RSP_RoutingKey 0x27
#define BAUM_RSP_FrontKeys6 0x28
#define BAUM_RSP_BackKeys6 0x29
#define BAUM_RSP_CommandKeys 0x2B
#define BAUM_RSP_FrontKeys10 0x2C
#define BAUM_RSP_BackKeys10 0x2D
#define BAUM_RSP_EntryKeys 0x33
#define BAUM_RSP_JoyStick 0x34
#define BAUM_RSP_ErrorCode 0x40
#define BAUM_RSP_InfoBlock 0x42
#define BAUM_RSP_DeviceIdentity 0x84
#define BAUM_RSP_SerialNumber 0x8A
#define BAUM_RSP_BluetoothName 0x8C
#define BAUM_TL1 0x01
#define BAUM_TL2 0x02
#define BAUM_TL3 0x04
#define BAUM_TR1 0x08
#define BAUM_TR2 0x10
#define BAUM_TR3 0x20
#define BUF_SIZE 256
typedef struct {
CharDriverState *chr;
brlapi_handle_t *brlapi;
int brlapi_fd;
unsigned int x, y;
uint8_t in_buf[BUF_SIZE];
uint8_t in_buf_used;
uint8_t out_buf[BUF_SIZE];
uint8_t out_buf_used, out_buf_ptr;
QEMUTimer *cellCount_timer;
} BaumDriverState;
/* Let's assume NABCC by default */
static const uint8_t nabcc_translation[256] = {
[0] = ' ',
#ifndef BRLAPI_DOTS
#define BRLAPI_DOTS(d1,d2,d3,d4,d5,d6,d7,d8) \
((d1?BRLAPI_DOT1:0)|\
(d2?BRLAPI_DOT2:0)|\
(d3?BRLAPI_DOT3:0)|\
(d4?BRLAPI_DOT4:0)|\
(d5?BRLAPI_DOT5:0)|\
(d6?BRLAPI_DOT6:0)|\
(d7?BRLAPI_DOT7:0)|\
(d8?BRLAPI_DOT8:0))
#endif
[BRLAPI_DOTS(1,0,0,0,0,0,0,0)] = 'a',
[BRLAPI_DOTS(1,1,0,0,0,0,0,0)] = 'b',
[BRLAPI_DOTS(1,0,0,1,0,0,0,0)] = 'c',
[BRLAPI_DOTS(1,0,0,1,1,0,0,0)] = 'd',
[BRLAPI_DOTS(1,0,0,0,1,0,0,0)] = 'e',
[BRLAPI_DOTS(1,1,0,1,0,0,0,0)] = 'f',
[BRLAPI_DOTS(1,1,0,1,1,0,0,0)] = 'g',
[BRLAPI_DOTS(1,1,0,0,1,0,0,0)] = 'h',
[BRLAPI_DOTS(0,1,0,1,0,0,0,0)] = 'i',
[BRLAPI_DOTS(0,1,0,1,1,0,0,0)] = 'j',
[BRLAPI_DOTS(1,0,1,0,0,0,0,0)] = 'k',
[BRLAPI_DOTS(1,1,1,0,0,0,0,0)] = 'l',
[BRLAPI_DOTS(1,0,1,1,0,0,0,0)] = 'm',
[BRLAPI_DOTS(1,0,1,1,1,0,0,0)] = 'n',
[BRLAPI_DOTS(1,0,1,0,1,0,0,0)] = 'o',
[BRLAPI_DOTS(1,1,1,1,0,0,0,0)] = 'p',
[BRLAPI_DOTS(1,1,1,1,1,0,0,0)] = 'q',
[BRLAPI_DOTS(1,1,1,0,1,0,0,0)] = 'r',
[BRLAPI_DOTS(0,1,1,1,0,0,0,0)] = 's',
[BRLAPI_DOTS(0,1,1,1,1,0,0,0)] = 't',
[BRLAPI_DOTS(1,0,1,0,0,1,0,0)] = 'u',
[BRLAPI_DOTS(1,1,1,0,0,1,0,0)] = 'v',
[BRLAPI_DOTS(0,1,0,1,1,1,0,0)] = 'w',
[BRLAPI_DOTS(1,0,1,1,0,1,0,0)] = 'x',
[BRLAPI_DOTS(1,0,1,1,1,1,0,0)] = 'y',
[BRLAPI_DOTS(1,0,1,0,1,1,0,0)] = 'z',
[BRLAPI_DOTS(1,0,0,0,0,0,1,0)] = 'A',
[BRLAPI_DOTS(1,1,0,0,0,0,1,0)] = 'B',
[BRLAPI_DOTS(1,0,0,1,0,0,1,0)] = 'C',
[BRLAPI_DOTS(1,0,0,1,1,0,1,0)] = 'D',
[BRLAPI_DOTS(1,0,0,0,1,0,1,0)] = 'E',
[BRLAPI_DOTS(1,1,0,1,0,0,1,0)] = 'F',
[BRLAPI_DOTS(1,1,0,1,1,0,1,0)] = 'G',
[BRLAPI_DOTS(1,1,0,0,1,0,1,0)] = 'H',
[BRLAPI_DOTS(0,1,0,1,0,0,1,0)] = 'I',
[BRLAPI_DOTS(0,1,0,1,1,0,1,0)] = 'J',
[BRLAPI_DOTS(1,0,1,0,0,0,1,0)] = 'K',
[BRLAPI_DOTS(1,1,1,0,0,0,1,0)] = 'L',
[BRLAPI_DOTS(1,0,1,1,0,0,1,0)] = 'M',
[BRLAPI_DOTS(1,0,1,1,1,0,1,0)] = 'N',
[BRLAPI_DOTS(1,0,1,0,1,0,1,0)] = 'O',
[BRLAPI_DOTS(1,1,1,1,0,0,1,0)] = 'P',
[BRLAPI_DOTS(1,1,1,1,1,0,1,0)] = 'Q',
[BRLAPI_DOTS(1,1,1,0,1,0,1,0)] = 'R',
[BRLAPI_DOTS(0,1,1,1,0,0,1,0)] = 'S',
[BRLAPI_DOTS(0,1,1,1,1,0,1,0)] = 'T',
[BRLAPI_DOTS(1,0,1,0,0,1,1,0)] = 'U',
[BRLAPI_DOTS(1,1,1,0,0,1,1,0)] = 'V',
[BRLAPI_DOTS(0,1,0,1,1,1,1,0)] = 'W',
[BRLAPI_DOTS(1,0,1,1,0,1,1,0)] = 'X',
[BRLAPI_DOTS(1,0,1,1,1,1,1,0)] = 'Y',
[BRLAPI_DOTS(1,0,1,0,1,1,1,0)] = 'Z',
[BRLAPI_DOTS(0,0,1,0,1,1,0,0)] = '0',
[BRLAPI_DOTS(0,1,0,0,0,0,0,0)] = '1',
[BRLAPI_DOTS(0,1,1,0,0,0,0,0)] = '2',
[BRLAPI_DOTS(0,1,0,0,1,0,0,0)] = '3',
[BRLAPI_DOTS(0,1,0,0,1,1,0,0)] = '4',
[BRLAPI_DOTS(0,1,0,0,0,1,0,0)] = '5',
[BRLAPI_DOTS(0,1,1,0,1,0,0,0)] = '6',
[BRLAPI_DOTS(0,1,1,0,1,1,0,0)] = '7',
[BRLAPI_DOTS(0,1,1,0,0,1,0,0)] = '8',
[BRLAPI_DOTS(0,0,1,0,1,0,0,0)] = '9',
[BRLAPI_DOTS(0,0,0,1,0,1,0,0)] = '.',
[BRLAPI_DOTS(0,0,1,1,0,1,0,0)] = '+',
[BRLAPI_DOTS(0,0,1,0,0,1,0,0)] = '-',
[BRLAPI_DOTS(1,0,0,0,0,1,0,0)] = '*',
[BRLAPI_DOTS(0,0,1,1,0,0,0,0)] = '/',
[BRLAPI_DOTS(1,1,1,0,1,1,0,0)] = '(',
[BRLAPI_DOTS(0,1,1,1,1,1,0,0)] = ')',
[BRLAPI_DOTS(1,1,1,1,0,1,0,0)] = '&',
[BRLAPI_DOTS(0,0,1,1,1,1,0,0)] = '#',
[BRLAPI_DOTS(0,0,0,0,0,1,0,0)] = ',',
[BRLAPI_DOTS(0,0,0,0,1,1,0,0)] = ';',
[BRLAPI_DOTS(1,0,0,0,1,1,0,0)] = ':',
[BRLAPI_DOTS(0,1,1,1,0,1,0,0)] = '!',
[BRLAPI_DOTS(1,0,0,1,1,1,0,0)] = '?',
[BRLAPI_DOTS(0,0,0,0,1,0,0,0)] = '"',
[BRLAPI_DOTS(0,0,1,0,0,0,0,0)] ='\'',
[BRLAPI_DOTS(0,0,0,1,0,0,0,0)] = '`',
[BRLAPI_DOTS(0,0,0,1,1,0,1,0)] = '^',
[BRLAPI_DOTS(0,0,0,1,1,0,0,0)] = '~',
[BRLAPI_DOTS(0,1,0,1,0,1,1,0)] = '[',
[BRLAPI_DOTS(1,1,0,1,1,1,1,0)] = ']',
[BRLAPI_DOTS(0,1,0,1,0,1,0,0)] = '{',
[BRLAPI_DOTS(1,1,0,1,1,1,0,0)] = '}',
[BRLAPI_DOTS(1,1,1,1,1,1,0,0)] = '=',
[BRLAPI_DOTS(1,1,0,0,0,1,0,0)] = '<',
[BRLAPI_DOTS(0,0,1,1,1,0,0,0)] = '>',
[BRLAPI_DOTS(1,1,0,1,0,1,0,0)] = '$',
[BRLAPI_DOTS(1,0,0,1,0,1,0,0)] = '%',
[BRLAPI_DOTS(0,0,0,1,0,0,1,0)] = '@',
[BRLAPI_DOTS(1,1,0,0,1,1,0,0)] = '|',
[BRLAPI_DOTS(1,1,0,0,1,1,1,0)] ='\\',
[BRLAPI_DOTS(0,0,0,1,1,1,0,0)] = '_',
};
/* The serial port can receive more of our data */
static void baum_accept_input(struct CharDriverState *chr)
{
BaumDriverState *baum = chr->opaque;
int room, first;
if (!baum->out_buf_used)
return;
room = qemu_chr_be_can_write(chr);
if (!room)
return;
if (room > baum->out_buf_used)
room = baum->out_buf_used;
first = BUF_SIZE - baum->out_buf_ptr;
if (room > first) {
qemu_chr_be_write(chr, baum->out_buf + baum->out_buf_ptr, first);
baum->out_buf_ptr = 0;
baum->out_buf_used -= first;
room -= first;
}
qemu_chr_be_write(chr, baum->out_buf + baum->out_buf_ptr, room);
baum->out_buf_ptr += room;
baum->out_buf_used -= room;
}
/* We want to send a packet */
static void baum_write_packet(BaumDriverState *baum, const uint8_t *buf, int len)
{
uint8_t io_buf[1 + 2 * len], *cur = io_buf;
int room;
*cur++ = ESC;
while (len--)
if ((*cur++ = *buf++) == ESC)
*cur++ = ESC;
room = qemu_chr_be_can_write(baum->chr);
len = cur - io_buf;
if (len <= room) {
/* Fits */
qemu_chr_be_write(baum->chr, io_buf, len);
} else {
int first;
uint8_t out;
/* Can't fit all, send what can be, and store the rest. */
qemu_chr_be_write(baum->chr, io_buf, room);
len -= room;
cur = io_buf + room;
if (len > BUF_SIZE - baum->out_buf_used) {
/* Can't even store it, drop the previous data... */
assert(len <= BUF_SIZE);
baum->out_buf_used = 0;
baum->out_buf_ptr = 0;
}
out = baum->out_buf_ptr;
baum->out_buf_used += len;
first = BUF_SIZE - baum->out_buf_ptr;
if (len > first) {
memcpy(baum->out_buf + out, cur, first);
out = 0;
len -= first;
cur += first;
}
memcpy(baum->out_buf + out, cur, len);
}
}
/* Called when the other end seems to have a wrong idea of our display size */
static void baum_cellCount_timer_cb(void *opaque)
{
BaumDriverState *baum = opaque;
uint8_t cell_count[] = { BAUM_RSP_CellCount, baum->x * baum->y };
DPRINTF("Timeout waiting for DisplayData, sending cell count\n");
baum_write_packet(baum, cell_count, sizeof(cell_count));
}
/* Try to interpret a whole incoming packet */
static int baum_eat_packet(BaumDriverState *baum, const uint8_t *buf, int len)
{
const uint8_t *cur = buf;
uint8_t req = 0;
if (!len--)
return 0;
if (*cur++ != ESC) {
while (*cur != ESC) {
if (!len--)
return 0;
cur++;
}
DPRINTF("Dropped %td bytes!\n", cur - buf);
}
#define EAT(c) do {\
if (!len--) \
return 0; \
if ((c = *cur++) == ESC) { \
if (!len--) \
return 0; \
if (*cur++ != ESC) { \
DPRINTF("Broken packet %#2x, tossing\n", req); \
if (timer_pending(baum->cellCount_timer)) { \
timer_del(baum->cellCount_timer); \
baum_cellCount_timer_cb(baum); \
} \
return (cur - 2 - buf); \
} \
} \
} while (0)
EAT(req);
switch (req) {
case BAUM_REQ_DisplayData:
{
uint8_t cells[baum->x * baum->y], c;
uint8_t text[baum->x * baum->y];
uint8_t zero[baum->x * baum->y];
int cursor = BRLAPI_CURSOR_OFF;
int i;
/* Allow 100ms to complete the DisplayData packet */
timer_mod(baum->cellCount_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
NANOSECONDS_PER_SECOND / 10);
for (i = 0; i < baum->x * baum->y ; i++) {
EAT(c);
cells[i] = c;
if ((c & (BRLAPI_DOT7|BRLAPI_DOT8))
== (BRLAPI_DOT7|BRLAPI_DOT8)) {
cursor = i + 1;
c &= ~(BRLAPI_DOT7|BRLAPI_DOT8);
}
if (!(c = nabcc_translation[c]))
c = '?';
text[i] = c;
}
timer_del(baum->cellCount_timer);
memset(zero, 0, sizeof(zero));
brlapi_writeArguments_t wa = {
.displayNumber = BRLAPI_DISPLAY_DEFAULT,
.regionBegin = 1,
.regionSize = baum->x * baum->y,
.text = (char *)text,
.textSize = baum->x * baum->y,
.andMask = zero,
.orMask = cells,
.cursor = cursor,
.charset = (char *)"ISO-8859-1",
};
if (brlapi__write(baum->brlapi, &wa) == -1)
brlapi_perror("baum brlapi_write");
break;
}
case BAUM_REQ_SetMode:
{
uint8_t mode, setting;
DPRINTF("SetMode\n");
EAT(mode);
EAT(setting);
/* ignore */
break;
}
case BAUM_REQ_SetProtocol:
{
uint8_t protocol;
DPRINTF("SetProtocol\n");
EAT(protocol);
/* ignore */
break;
}
case BAUM_REQ_GetDeviceIdentity:
{
uint8_t identity[17] = { BAUM_RSP_DeviceIdentity,
'B','a','u','m',' ','V','a','r','i','o' };
DPRINTF("GetDeviceIdentity\n");
identity[11] = '0' + baum->x / 10;
identity[12] = '0' + baum->x % 10;
baum_write_packet(baum, identity, sizeof(identity));
break;
}
case BAUM_REQ_GetVersionNumber:
{
uint8_t version[] = { BAUM_RSP_VersionNumber, 1 }; /* ? */
DPRINTF("GetVersionNumber\n");
baum_write_packet(baum, version, sizeof(version));
break;
}
case BAUM_REQ_GetSerialNumber:
{
uint8_t serial[] = { BAUM_RSP_SerialNumber,
'0','0','0','0','0','0','0','0' };
DPRINTF("GetSerialNumber\n");
baum_write_packet(baum, serial, sizeof(serial));
break;
}
case BAUM_REQ_GetKeys:
{
DPRINTF("Get%0#2x\n", req);
/* ignore */
break;
}
default:
DPRINTF("unrecognized request %0#2x\n", req);
do
if (!len--)
return 0;
while (*cur++ != ESC);
cur--;
break;
}
return cur - buf;
}
/* The other end is writing some data. Store it and try to interpret */
static int baum_write(CharDriverState *chr, const uint8_t *buf, int len)
{
BaumDriverState *baum = chr->opaque;
int tocopy, cur, eaten, orig_len = len;
if (!len)
return 0;
if (!baum->brlapi)
return len;
while (len) {
/* Complete our buffer as much as possible */
tocopy = len;
if (tocopy > BUF_SIZE - baum->in_buf_used)
tocopy = BUF_SIZE - baum->in_buf_used;
memcpy(baum->in_buf + baum->in_buf_used, buf, tocopy);
baum->in_buf_used += tocopy;
buf += tocopy;
len -= tocopy;
/* Interpret it as much as possible */
cur = 0;
while (cur < baum->in_buf_used &&
(eaten = baum_eat_packet(baum, baum->in_buf + cur, baum->in_buf_used - cur)))
cur += eaten;
/* Shift the remainder */
if (cur) {
memmove(baum->in_buf, baum->in_buf + cur, baum->in_buf_used - cur);
baum->in_buf_used -= cur;
}
/* And continue if any data left */
}
return orig_len;
}
/* Send the key code to the other end */
static void baum_send_key(BaumDriverState *baum, uint8_t type, uint8_t value) {
uint8_t packet[] = { type, value };
DPRINTF("writing key %x %x\n", type, value);
baum_write_packet(baum, packet, sizeof(packet));
}
/* We got some data on the BrlAPI socket */
static void baum_chr_read(void *opaque)
{
BaumDriverState *baum = opaque;
brlapi_keyCode_t code;
int ret;
if (!baum->brlapi)
return;
while ((ret = brlapi__readKey(baum->brlapi, 0, &code)) == 1) {
DPRINTF("got key %"BRLAPI_PRIxKEYCODE"\n", code);
/* Emulate */
switch (code & BRLAPI_KEY_TYPE_MASK) {
case BRLAPI_KEY_TYPE_CMD:
switch (code & BRLAPI_KEY_CMD_BLK_MASK) {
case BRLAPI_KEY_CMD_ROUTE:
baum_send_key(baum, BAUM_RSP_RoutingKey, (code & BRLAPI_KEY_CMD_ARG_MASK)+1);
baum_send_key(baum, BAUM_RSP_RoutingKey, 0);
break;
case 0:
switch (code & BRLAPI_KEY_CMD_ARG_MASK) {
case BRLAPI_KEY_CMD_FWINLT:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL2);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_FWINRT:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TR2);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_LNUP:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TR1);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_LNDN:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TR3);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_TOP:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL1|BAUM_TR1);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_BOT:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL3|BAUM_TR3);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_TOP_LEFT:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL2|BAUM_TR1);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_BOT_LEFT:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL2|BAUM_TR3);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_HOME:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL2|BAUM_TR1|BAUM_TR3);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_PREFMENU:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL1|BAUM_TL3|BAUM_TR1);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
}
}
break;
case BRLAPI_KEY_TYPE_SYM:
break;
}
}
if (ret == -1 && (brlapi_errno != BRLAPI_ERROR_LIBCERR || errno != EINTR)) {
brlapi_perror("baum: brlapi_readKey");
brlapi__closeConnection(baum->brlapi);
g_free(baum->brlapi);
baum->brlapi = NULL;
}
}
static void baum_close(struct CharDriverState *chr)
{
BaumDriverState *baum = chr->opaque;
timer_free(baum->cellCount_timer);
if (baum->brlapi) {
brlapi__closeConnection(baum->brlapi);
g_free(baum->brlapi);
}
g_free(baum);
}
static CharDriverState *chr_baum_init(const char *id,
ChardevBackend *backend,
ChardevReturn *ret,
Error **errp)
{
ChardevCommon *common = backend->u.braille.data;
BaumDriverState *baum;
CharDriverState *chr;
brlapi_handle_t *handle;
#if defined(CONFIG_SDL)
#if SDL_COMPILEDVERSION < SDL_VERSIONNUM(2, 0, 0)
SDL_SysWMinfo info;
#endif
#endif
int tty;
chr = qemu_chr_alloc(common, errp);
if (!chr) {
return NULL;
}
baum = g_malloc0(sizeof(BaumDriverState));
baum->chr = chr;
chr->opaque = baum;
chr->chr_write = baum_write;
chr->chr_accept_input = baum_accept_input;
chr->chr_close = baum_close;
handle = g_malloc0(brlapi_getHandleSize());
baum->brlapi = handle;
baum->brlapi_fd = brlapi__openConnection(handle, NULL, NULL);
if (baum->brlapi_fd == -1) {
error_setg(errp, "brlapi__openConnection: %s",
brlapi_strerror(brlapi_error_location()));
goto fail_handle;
}
baum->cellCount_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, baum_cellCount_timer_cb, baum);
if (brlapi__getDisplaySize(handle, &baum->x, &baum->y) == -1) {
error_setg(errp, "brlapi__getDisplaySize: %s",
brlapi_strerror(brlapi_error_location()));
goto fail;
}
#if defined(CONFIG_SDL)
#if SDL_COMPILEDVERSION < SDL_VERSIONNUM(2, 0, 0)
memset(&info, 0, sizeof(info));
SDL_VERSION(&info.version);
if (SDL_GetWMInfo(&info))
tty = info.info.x11.wmwindow;
else
#endif
#endif
tty = BRLAPI_TTY_DEFAULT;
if (brlapi__enterTtyMode(handle, tty, NULL) == -1) {
error_setg(errp, "brlapi__enterTtyMode: %s",
brlapi_strerror(brlapi_error_location()));
goto fail;
}
qemu_set_fd_handler(baum->brlapi_fd, baum_chr_read, NULL, baum);
return chr;
fail:
timer_free(baum->cellCount_timer);
brlapi__closeConnection(handle);
fail_handle:
g_free(handle);
g_free(chr);
g_free(baum);
return NULL;
}
static void register_types(void)
{
register_char_driver("braille", CHARDEV_BACKEND_KIND_BRAILLE, NULL,
chr_baum_init);
}
type_init(register_types);

View File

@@ -1,401 +0,0 @@
/*
* QEMU Cryptodev backend for QEMU cipher APIs
*
* Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
*
* Authors:
* Gonglei <arei.gonglei@huawei.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "sysemu/cryptodev.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "standard-headers/linux/virtio_crypto.h"
#include "crypto/cipher.h"
/**
* @TYPE_CRYPTODEV_BACKEND_BUILTIN:
* name of backend that uses QEMU cipher API
*/
#define TYPE_CRYPTODEV_BACKEND_BUILTIN "cryptodev-backend-builtin"
#define CRYPTODEV_BACKEND_BUILTIN(obj) \
OBJECT_CHECK(CryptoDevBackendBuiltin, \
(obj), TYPE_CRYPTODEV_BACKEND_BUILTIN)
typedef struct CryptoDevBackendBuiltin
CryptoDevBackendBuiltin;
typedef struct CryptoDevBackendBuiltinSession {
QCryptoCipher *cipher;
uint8_t direction; /* encryption or decryption */
uint8_t type; /* cipher? hash? aead? */
QTAILQ_ENTRY(CryptoDevBackendBuiltinSession) next;
} CryptoDevBackendBuiltinSession;
/* Max number of symmetric sessions */
#define MAX_NUM_SESSIONS 256
#define CRYPTODEV_BUITLIN_MAX_AUTH_KEY_LEN 512
#define CRYPTODEV_BUITLIN_MAX_CIPHER_KEY_LEN 64
struct CryptoDevBackendBuiltin {
CryptoDevBackend parent_obj;
CryptoDevBackendBuiltinSession *sessions[MAX_NUM_SESSIONS];
};
static void cryptodev_builtin_init(
CryptoDevBackend *backend, Error **errp)
{
/* Only support one queue */
int queues = backend->conf.peers.queues;
CryptoDevBackendClient *cc;
if (queues != 1) {
error_setg(errp,
"Only support one queue in cryptdov-builtin backend");
return;
}
cc = cryptodev_backend_new_client(
"cryptodev-builtin", NULL);
cc->info_str = g_strdup_printf("cryptodev-builtin0");
cc->queue_index = 0;
cc->type = CRYPTODEV_BACKEND_TYPE_BUILTIN;
backend->conf.peers.ccs[0] = cc;
backend->conf.crypto_services =
1u << VIRTIO_CRYPTO_SERVICE_CIPHER |
1u << VIRTIO_CRYPTO_SERVICE_HASH |
1u << VIRTIO_CRYPTO_SERVICE_MAC;
backend->conf.cipher_algo_l = 1u << VIRTIO_CRYPTO_CIPHER_AES_CBC;
backend->conf.hash_algo = 1u << VIRTIO_CRYPTO_HASH_SHA1;
/*
* Set the Maximum length of crypto request.
* Why this value? Just avoid to overflow when
* memory allocation for each crypto request.
*/
backend->conf.max_size = LONG_MAX - sizeof(CryptoDevBackendSymOpInfo);
backend->conf.max_cipher_key_len = CRYPTODEV_BUITLIN_MAX_CIPHER_KEY_LEN;
backend->conf.max_auth_key_len = CRYPTODEV_BUITLIN_MAX_AUTH_KEY_LEN;
cryptodev_backend_set_ready(backend, true);
}
static int
cryptodev_builtin_get_unused_session_index(
CryptoDevBackendBuiltin *builtin)
{
size_t i;
for (i = 0; i < MAX_NUM_SESSIONS; i++) {
if (builtin->sessions[i] == NULL) {
return i;
}
}
return -1;
}
#define AES_KEYSIZE_128 16
#define AES_KEYSIZE_192 24
#define AES_KEYSIZE_256 32
#define AES_KEYSIZE_128_XTS AES_KEYSIZE_256
#define AES_KEYSIZE_256_XTS 64
static int
cryptodev_builtin_get_aes_algo(uint32_t key_len, int mode, Error **errp)
{
int algo;
if (key_len == AES_KEYSIZE_128) {
algo = QCRYPTO_CIPHER_ALG_AES_128;
} else if (key_len == AES_KEYSIZE_192) {
algo = QCRYPTO_CIPHER_ALG_AES_192;
} else if (key_len == AES_KEYSIZE_256) { /* equals AES_KEYSIZE_128_XTS */
if (mode == QCRYPTO_CIPHER_MODE_XTS) {
algo = QCRYPTO_CIPHER_ALG_AES_128;
} else {
algo = QCRYPTO_CIPHER_ALG_AES_256;
}
} else if (key_len == AES_KEYSIZE_256_XTS) {
if (mode == QCRYPTO_CIPHER_MODE_XTS) {
algo = QCRYPTO_CIPHER_ALG_AES_256;
} else {
goto err;
}
} else {
goto err;
}
return algo;
err:
error_setg(errp, "Unsupported key length :%u", key_len);
return -1;
}
static int cryptodev_builtin_create_cipher_session(
CryptoDevBackendBuiltin *builtin,
CryptoDevBackendSymSessionInfo *sess_info,
Error **errp)
{
int algo;
int mode;
QCryptoCipher *cipher;
int index;
CryptoDevBackendBuiltinSession *sess;
if (sess_info->op_type != VIRTIO_CRYPTO_SYM_OP_CIPHER) {
error_setg(errp, "Unsupported optype :%u", sess_info->op_type);
return -1;
}
index = cryptodev_builtin_get_unused_session_index(builtin);
if (index < 0) {
error_setg(errp, "Total number of sessions created exceeds %u",
MAX_NUM_SESSIONS);
return -1;
}
switch (sess_info->cipher_alg) {
case VIRTIO_CRYPTO_CIPHER_AES_ECB:
mode = QCRYPTO_CIPHER_MODE_ECB;
algo = cryptodev_builtin_get_aes_algo(sess_info->key_len,
mode, errp);
if (algo < 0) {
return -1;
}
break;
case VIRTIO_CRYPTO_CIPHER_AES_CBC:
mode = QCRYPTO_CIPHER_MODE_CBC;
algo = cryptodev_builtin_get_aes_algo(sess_info->key_len,
mode, errp);
if (algo < 0) {
return -1;
}
break;
case VIRTIO_CRYPTO_CIPHER_AES_CTR:
mode = QCRYPTO_CIPHER_MODE_CTR;
algo = cryptodev_builtin_get_aes_algo(sess_info->key_len,
mode, errp);
if (algo < 0) {
return -1;
}
break;
case VIRTIO_CRYPTO_CIPHER_AES_XTS:
mode = QCRYPTO_CIPHER_MODE_XTS;
algo = cryptodev_builtin_get_aes_algo(sess_info->key_len,
mode, errp);
if (algo < 0) {
return -1;
}
break;
case VIRTIO_CRYPTO_CIPHER_3DES_ECB:
mode = QCRYPTO_CIPHER_MODE_ECB;
algo = QCRYPTO_CIPHER_ALG_3DES;
break;
case VIRTIO_CRYPTO_CIPHER_3DES_CBC:
mode = QCRYPTO_CIPHER_MODE_CBC;
algo = QCRYPTO_CIPHER_ALG_3DES;
break;
case VIRTIO_CRYPTO_CIPHER_3DES_CTR:
mode = QCRYPTO_CIPHER_MODE_CTR;
algo = QCRYPTO_CIPHER_ALG_3DES;
break;
default:
error_setg(errp, "Unsupported cipher alg :%u",
sess_info->cipher_alg);
return -1;
}
cipher = qcrypto_cipher_new(algo, mode,
sess_info->cipher_key,
sess_info->key_len,
errp);
if (!cipher) {
return -1;
}
sess = g_new0(CryptoDevBackendBuiltinSession, 1);
sess->cipher = cipher;
sess->direction = sess_info->direction;
sess->type = sess_info->op_type;
builtin->sessions[index] = sess;
return index;
}
static int64_t cryptodev_builtin_sym_create_session(
CryptoDevBackend *backend,
CryptoDevBackendSymSessionInfo *sess_info,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendBuiltin *builtin =
CRYPTODEV_BACKEND_BUILTIN(backend);
int64_t session_id = -1;
int ret;
switch (sess_info->op_code) {
case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION:
ret = cryptodev_builtin_create_cipher_session(
builtin, sess_info, errp);
if (ret < 0) {
return ret;
} else {
session_id = ret;
}
break;
case VIRTIO_CRYPTO_HASH_CREATE_SESSION:
case VIRTIO_CRYPTO_MAC_CREATE_SESSION:
default:
error_setg(errp, "Unsupported opcode :%" PRIu32 "",
sess_info->op_code);
return -1;
}
return session_id;
}
static int cryptodev_builtin_sym_close_session(
CryptoDevBackend *backend,
uint64_t session_id,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendBuiltin *builtin =
CRYPTODEV_BACKEND_BUILTIN(backend);
if (session_id >= MAX_NUM_SESSIONS ||
builtin->sessions[session_id] == NULL) {
error_setg(errp, "Cannot find a valid session id: %" PRIu64 "",
session_id);
return -1;
}
qcrypto_cipher_free(builtin->sessions[session_id]->cipher);
g_free(builtin->sessions[session_id]);
builtin->sessions[session_id] = NULL;
return 0;
}
static int cryptodev_builtin_sym_operation(
CryptoDevBackend *backend,
CryptoDevBackendSymOpInfo *op_info,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendBuiltin *builtin =
CRYPTODEV_BACKEND_BUILTIN(backend);
CryptoDevBackendBuiltinSession *sess;
int ret;
if (op_info->session_id >= MAX_NUM_SESSIONS ||
builtin->sessions[op_info->session_id] == NULL) {
error_setg(errp, "Cannot find a valid session id: %" PRIu64 "",
op_info->session_id);
return -VIRTIO_CRYPTO_INVSESS;
}
if (op_info->op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
error_setg(errp,
"Algorithm chain is unsupported for cryptdoev-builtin");
return -VIRTIO_CRYPTO_NOTSUPP;
}
sess = builtin->sessions[op_info->session_id];
if (op_info->iv_len > 0) {
ret = qcrypto_cipher_setiv(sess->cipher, op_info->iv,
op_info->iv_len, errp);
if (ret < 0) {
return -VIRTIO_CRYPTO_ERR;
}
}
if (sess->direction == VIRTIO_CRYPTO_OP_ENCRYPT) {
ret = qcrypto_cipher_encrypt(sess->cipher, op_info->src,
op_info->dst, op_info->src_len, errp);
if (ret < 0) {
return -VIRTIO_CRYPTO_ERR;
}
} else {
ret = qcrypto_cipher_decrypt(sess->cipher, op_info->src,
op_info->dst, op_info->src_len, errp);
if (ret < 0) {
return -VIRTIO_CRYPTO_ERR;
}
}
return VIRTIO_CRYPTO_OK;
}
static void cryptodev_builtin_cleanup(
CryptoDevBackend *backend,
Error **errp)
{
CryptoDevBackendBuiltin *builtin =
CRYPTODEV_BACKEND_BUILTIN(backend);
size_t i;
int queues = backend->conf.peers.queues;
CryptoDevBackendClient *cc;
for (i = 0; i < MAX_NUM_SESSIONS; i++) {
if (builtin->sessions[i] != NULL) {
cryptodev_builtin_sym_close_session(
backend, i, 0, errp);
}
}
for (i = 0; i < queues; i++) {
cc = backend->conf.peers.ccs[i];
if (cc) {
cryptodev_backend_free_client(cc);
backend->conf.peers.ccs[i] = NULL;
}
}
cryptodev_backend_set_ready(backend, false);
}
static void
cryptodev_builtin_class_init(ObjectClass *oc, void *data)
{
CryptoDevBackendClass *bc = CRYPTODEV_BACKEND_CLASS(oc);
bc->init = cryptodev_builtin_init;
bc->cleanup = cryptodev_builtin_cleanup;
bc->create_session = cryptodev_builtin_sym_create_session;
bc->close_session = cryptodev_builtin_sym_close_session;
bc->do_sym_op = cryptodev_builtin_sym_operation;
}
static const TypeInfo cryptodev_builtin_info = {
.name = TYPE_CRYPTODEV_BACKEND_BUILTIN,
.parent = TYPE_CRYPTODEV_BACKEND,
.class_init = cryptodev_builtin_class_init,
.instance_size = sizeof(CryptoDevBackendBuiltin),
};
static void
cryptodev_builtin_register_types(void)
{
type_register_static(&cryptodev_builtin_info);
}
type_init(cryptodev_builtin_register_types);

View File

@@ -1,380 +0,0 @@
/*
* QEMU Cryptodev backend for QEMU cipher APIs
*
* Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
*
* Authors:
* Gonglei <arei.gonglei@huawei.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
#include "hw/virtio/vhost-user.h"
#include "standard-headers/linux/virtio_crypto.h"
#include "sysemu/cryptodev-vhost.h"
#include "chardev/char-fe.h"
#include "sysemu/cryptodev-vhost-user.h"
/**
* @TYPE_CRYPTODEV_BACKEND_VHOST_USER:
* name of backend that uses vhost user server
*/
#define TYPE_CRYPTODEV_BACKEND_VHOST_USER "cryptodev-vhost-user"
#define CRYPTODEV_BACKEND_VHOST_USER(obj) \
OBJECT_CHECK(CryptoDevBackendVhostUser, \
(obj), TYPE_CRYPTODEV_BACKEND_VHOST_USER)
typedef struct CryptoDevBackendVhostUser {
CryptoDevBackend parent_obj;
VhostUserState vhost_user;
CharBackend chr;
char *chr_name;
bool opened;
CryptoDevBackendVhost *vhost_crypto[MAX_CRYPTO_QUEUE_NUM];
} CryptoDevBackendVhostUser;
static int
cryptodev_vhost_user_running(
CryptoDevBackendVhost *crypto)
{
return crypto ? 1 : 0;
}
CryptoDevBackendVhost *
cryptodev_vhost_user_get_vhost(
CryptoDevBackendClient *cc,
CryptoDevBackend *b,
uint16_t queue)
{
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(b);
assert(cc->type == CRYPTODEV_BACKEND_TYPE_VHOST_USER);
assert(queue < MAX_CRYPTO_QUEUE_NUM);
return s->vhost_crypto[queue];
}
static void cryptodev_vhost_user_stop(int queues,
CryptoDevBackendVhostUser *s)
{
size_t i;
for (i = 0; i < queues; i++) {
if (!cryptodev_vhost_user_running(s->vhost_crypto[i])) {
continue;
}
cryptodev_vhost_cleanup(s->vhost_crypto[i]);
s->vhost_crypto[i] = NULL;
}
}
static int
cryptodev_vhost_user_start(int queues,
CryptoDevBackendVhostUser *s)
{
CryptoDevBackendVhostOptions options;
CryptoDevBackend *b = CRYPTODEV_BACKEND(s);
int max_queues;
size_t i;
for (i = 0; i < queues; i++) {
if (cryptodev_vhost_user_running(s->vhost_crypto[i])) {
continue;
}
options.opaque = &s->vhost_user;
options.backend_type = VHOST_BACKEND_TYPE_USER;
options.cc = b->conf.peers.ccs[i];
s->vhost_crypto[i] = cryptodev_vhost_init(&options);
if (!s->vhost_crypto[i]) {
error_report("failed to init vhost_crypto for queue %zu", i);
goto err;
}
if (i == 0) {
max_queues =
cryptodev_vhost_get_max_queues(s->vhost_crypto[i]);
if (queues > max_queues) {
error_report("you are asking more queues than supported: %d",
max_queues);
goto err;
}
}
}
return 0;
err:
cryptodev_vhost_user_stop(i + 1, s);
return -1;
}
static Chardev *
cryptodev_vhost_claim_chardev(CryptoDevBackendVhostUser *s,
Error **errp)
{
Chardev *chr;
if (s->chr_name == NULL) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
"chardev", "a valid character device");
return NULL;
}
chr = qemu_chr_find(s->chr_name);
if (chr == NULL) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", s->chr_name);
return NULL;
}
return chr;
}
static void cryptodev_vhost_user_event(void *opaque, int event)
{
CryptoDevBackendVhostUser *s = opaque;
CryptoDevBackend *b = CRYPTODEV_BACKEND(s);
int queues = b->conf.peers.queues;
assert(queues < MAX_CRYPTO_QUEUE_NUM);
switch (event) {
case CHR_EVENT_OPENED:
if (cryptodev_vhost_user_start(queues, s) < 0) {
exit(1);
}
b->ready = true;
break;
case CHR_EVENT_CLOSED:
b->ready = false;
cryptodev_vhost_user_stop(queues, s);
break;
}
}
static void cryptodev_vhost_user_init(
CryptoDevBackend *backend, Error **errp)
{
int queues = backend->conf.peers.queues;
size_t i;
Error *local_err = NULL;
Chardev *chr;
CryptoDevBackendClient *cc;
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(backend);
chr = cryptodev_vhost_claim_chardev(s, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
s->opened = true;
for (i = 0; i < queues; i++) {
cc = cryptodev_backend_new_client(
"cryptodev-vhost-user", NULL);
cc->info_str = g_strdup_printf("cryptodev-vhost-user%zu to %s ",
i, chr->label);
cc->queue_index = i;
cc->type = CRYPTODEV_BACKEND_TYPE_VHOST_USER;
backend->conf.peers.ccs[i] = cc;
if (i == 0) {
if (!qemu_chr_fe_init(&s->chr, chr, &local_err)) {
error_propagate(errp, local_err);
return;
}
}
}
if (!vhost_user_init(&s->vhost_user, &s->chr, errp)) {
return;
}
qemu_chr_fe_set_handlers(&s->chr, NULL, NULL,
cryptodev_vhost_user_event, NULL, s, NULL, true);
backend->conf.crypto_services =
1u << VIRTIO_CRYPTO_SERVICE_CIPHER |
1u << VIRTIO_CRYPTO_SERVICE_HASH |
1u << VIRTIO_CRYPTO_SERVICE_MAC;
backend->conf.cipher_algo_l = 1u << VIRTIO_CRYPTO_CIPHER_AES_CBC;
backend->conf.hash_algo = 1u << VIRTIO_CRYPTO_HASH_SHA1;
backend->conf.max_size = UINT64_MAX;
backend->conf.max_cipher_key_len = VHOST_USER_MAX_CIPHER_KEY_LEN;
backend->conf.max_auth_key_len = VHOST_USER_MAX_AUTH_KEY_LEN;
}
static int64_t cryptodev_vhost_user_sym_create_session(
CryptoDevBackend *backend,
CryptoDevBackendSymSessionInfo *sess_info,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendClient *cc =
backend->conf.peers.ccs[queue_index];
CryptoDevBackendVhost *vhost_crypto;
uint64_t session_id = 0;
int ret;
vhost_crypto = cryptodev_vhost_user_get_vhost(cc, backend, queue_index);
if (vhost_crypto) {
struct vhost_dev *dev = &(vhost_crypto->dev);
ret = dev->vhost_ops->vhost_crypto_create_session(dev,
sess_info,
&session_id);
if (ret < 0) {
return -1;
} else {
return session_id;
}
}
return -1;
}
static int cryptodev_vhost_user_sym_close_session(
CryptoDevBackend *backend,
uint64_t session_id,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendClient *cc =
backend->conf.peers.ccs[queue_index];
CryptoDevBackendVhost *vhost_crypto;
int ret;
vhost_crypto = cryptodev_vhost_user_get_vhost(cc, backend, queue_index);
if (vhost_crypto) {
struct vhost_dev *dev = &(vhost_crypto->dev);
ret = dev->vhost_ops->vhost_crypto_close_session(dev,
session_id);
if (ret < 0) {
return -1;
} else {
return 0;
}
}
return -1;
}
static void cryptodev_vhost_user_cleanup(
CryptoDevBackend *backend,
Error **errp)
{
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(backend);
size_t i;
int queues = backend->conf.peers.queues;
CryptoDevBackendClient *cc;
cryptodev_vhost_user_stop(queues, s);
for (i = 0; i < queues; i++) {
cc = backend->conf.peers.ccs[i];
if (cc) {
cryptodev_backend_free_client(cc);
backend->conf.peers.ccs[i] = NULL;
}
}
vhost_user_cleanup(&s->vhost_user);
}
static void cryptodev_vhost_user_set_chardev(Object *obj,
const char *value, Error **errp)
{
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(obj);
if (s->opened) {
error_setg(errp, QERR_PERMISSION_DENIED);
} else {
g_free(s->chr_name);
s->chr_name = g_strdup(value);
}
}
static char *
cryptodev_vhost_user_get_chardev(Object *obj, Error **errp)
{
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(obj);
Chardev *chr = qemu_chr_fe_get_driver(&s->chr);
if (chr && chr->label) {
return g_strdup(chr->label);
}
return NULL;
}
static void cryptodev_vhost_user_instance_int(Object *obj)
{
object_property_add_str(obj, "chardev",
cryptodev_vhost_user_get_chardev,
cryptodev_vhost_user_set_chardev,
NULL);
}
static void cryptodev_vhost_user_finalize(Object *obj)
{
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(obj);
qemu_chr_fe_deinit(&s->chr, false);
g_free(s->chr_name);
}
static void
cryptodev_vhost_user_class_init(ObjectClass *oc, void *data)
{
CryptoDevBackendClass *bc = CRYPTODEV_BACKEND_CLASS(oc);
bc->init = cryptodev_vhost_user_init;
bc->cleanup = cryptodev_vhost_user_cleanup;
bc->create_session = cryptodev_vhost_user_sym_create_session;
bc->close_session = cryptodev_vhost_user_sym_close_session;
bc->do_sym_op = NULL;
}
static const TypeInfo cryptodev_vhost_user_info = {
.name = TYPE_CRYPTODEV_BACKEND_VHOST_USER,
.parent = TYPE_CRYPTODEV_BACKEND,
.class_init = cryptodev_vhost_user_class_init,
.instance_init = cryptodev_vhost_user_instance_int,
.instance_finalize = cryptodev_vhost_user_finalize,
.instance_size = sizeof(CryptoDevBackendVhostUser),
};
static void
cryptodev_vhost_user_register_types(void)
{
type_register_static(&cryptodev_vhost_user_info);
}
type_init(cryptodev_vhost_user_register_types);

View File

@@ -1,347 +0,0 @@
/*
* QEMU Cryptodev backend for QEMU cipher APIs
*
* Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
*
* Authors:
* Gonglei <arei.gonglei@huawei.com>
* Jay Zhou <jianjay.zhou@huawei.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "hw/virtio/virtio-bus.h"
#include "sysemu/cryptodev-vhost.h"
#ifdef CONFIG_VHOST_CRYPTO
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
#include "hw/virtio/virtio-crypto.h"
#include "sysemu/cryptodev-vhost-user.h"
uint64_t
cryptodev_vhost_get_max_queues(
CryptoDevBackendVhost *crypto)
{
return crypto->dev.max_queues;
}
void cryptodev_vhost_cleanup(CryptoDevBackendVhost *crypto)
{
vhost_dev_cleanup(&crypto->dev);
g_free(crypto);
}
struct CryptoDevBackendVhost *
cryptodev_vhost_init(
CryptoDevBackendVhostOptions *options)
{
int r;
CryptoDevBackendVhost *crypto;
crypto = g_new(CryptoDevBackendVhost, 1);
crypto->dev.max_queues = 1;
crypto->dev.nvqs = 1;
crypto->dev.vqs = crypto->vqs;
crypto->cc = options->cc;
crypto->dev.protocol_features = 0;
crypto->backend = -1;
/* vhost-user needs vq_index to initiate a specific queue pair */
crypto->dev.vq_index = crypto->cc->queue_index * crypto->dev.nvqs;
r = vhost_dev_init(&crypto->dev, options->opaque, options->backend_type, 0);
if (r < 0) {
goto fail;
}
return crypto;
fail:
g_free(crypto);
return NULL;
}
static int
cryptodev_vhost_start_one(CryptoDevBackendVhost *crypto,
VirtIODevice *dev)
{
int r;
crypto->dev.nvqs = 1;
crypto->dev.vqs = crypto->vqs;
r = vhost_dev_enable_notifiers(&crypto->dev, dev);
if (r < 0) {
goto fail_notifiers;
}
r = vhost_dev_start(&crypto->dev, dev);
if (r < 0) {
goto fail_start;
}
return 0;
fail_start:
vhost_dev_disable_notifiers(&crypto->dev, dev);
fail_notifiers:
return r;
}
static void
cryptodev_vhost_stop_one(CryptoDevBackendVhost *crypto,
VirtIODevice *dev)
{
vhost_dev_stop(&crypto->dev, dev);
vhost_dev_disable_notifiers(&crypto->dev, dev);
}
CryptoDevBackendVhost *
cryptodev_get_vhost(CryptoDevBackendClient *cc,
CryptoDevBackend *b,
uint16_t queue)
{
CryptoDevBackendVhost *vhost_crypto = NULL;
if (!cc) {
return NULL;
}
switch (cc->type) {
#if defined(CONFIG_VHOST_USER) && defined(CONFIG_LINUX)
case CRYPTODEV_BACKEND_TYPE_VHOST_USER:
vhost_crypto = cryptodev_vhost_user_get_vhost(cc, b, queue);
break;
#endif
default:
break;
}
return vhost_crypto;
}
static void
cryptodev_vhost_set_vq_index(CryptoDevBackendVhost *crypto,
int vq_index)
{
crypto->dev.vq_index = vq_index;
}
static int
vhost_set_vring_enable(CryptoDevBackendClient *cc,
CryptoDevBackend *b,
uint16_t queue, int enable)
{
CryptoDevBackendVhost *crypto =
cryptodev_get_vhost(cc, b, queue);
const VhostOps *vhost_ops;
cc->vring_enable = enable;
if (!crypto) {
return 0;
}
vhost_ops = crypto->dev.vhost_ops;
if (vhost_ops->vhost_set_vring_enable) {
return vhost_ops->vhost_set_vring_enable(&crypto->dev, enable);
}
return 0;
}
int cryptodev_vhost_start(VirtIODevice *dev, int total_queues)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev);
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(dev)));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(vbus);
int r, e;
int i;
CryptoDevBackend *b = vcrypto->cryptodev;
CryptoDevBackendVhost *vhost_crypto;
CryptoDevBackendClient *cc;
if (!k->set_guest_notifiers) {
error_report("binding does not support guest notifiers");
return -ENOSYS;
}
for (i = 0; i < total_queues; i++) {
cc = b->conf.peers.ccs[i];
vhost_crypto = cryptodev_get_vhost(cc, b, i);
cryptodev_vhost_set_vq_index(vhost_crypto, i);
/* Suppress the masking guest notifiers on vhost user
* because vhost user doesn't interrupt masking/unmasking
* properly.
*/
if (cc->type == CRYPTODEV_BACKEND_TYPE_VHOST_USER) {
dev->use_guest_notifier_mask = false;
}
}
r = k->set_guest_notifiers(qbus->parent, total_queues, true);
if (r < 0) {
error_report("error binding guest notifier: %d", -r);
goto err;
}
for (i = 0; i < total_queues; i++) {
cc = b->conf.peers.ccs[i];
vhost_crypto = cryptodev_get_vhost(cc, b, i);
r = cryptodev_vhost_start_one(vhost_crypto, dev);
if (r < 0) {
goto err_start;
}
if (cc->vring_enable) {
/* restore vring enable state */
r = vhost_set_vring_enable(cc, b, i, cc->vring_enable);
if (r < 0) {
goto err_start;
}
}
}
return 0;
err_start:
while (--i >= 0) {
cc = b->conf.peers.ccs[i];
vhost_crypto = cryptodev_get_vhost(cc, b, i);
cryptodev_vhost_stop_one(vhost_crypto, dev);
}
e = k->set_guest_notifiers(qbus->parent, total_queues, false);
if (e < 0) {
error_report("vhost guest notifier cleanup failed: %d", e);
}
err:
return r;
}
void cryptodev_vhost_stop(VirtIODevice *dev, int total_queues)
{
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(dev)));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(vbus);
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev);
CryptoDevBackend *b = vcrypto->cryptodev;
CryptoDevBackendVhost *vhost_crypto;
CryptoDevBackendClient *cc;
size_t i;
int r;
for (i = 0; i < total_queues; i++) {
cc = b->conf.peers.ccs[i];
vhost_crypto = cryptodev_get_vhost(cc, b, i);
cryptodev_vhost_stop_one(vhost_crypto, dev);
}
r = k->set_guest_notifiers(qbus->parent, total_queues, false);
if (r < 0) {
error_report("vhost guest notifier cleanup failed: %d", r);
}
assert(r >= 0);
}
void cryptodev_vhost_virtqueue_mask(VirtIODevice *dev,
int queue,
int idx, bool mask)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev);
CryptoDevBackend *b = vcrypto->cryptodev;
CryptoDevBackendVhost *vhost_crypto;
CryptoDevBackendClient *cc;
assert(queue < MAX_CRYPTO_QUEUE_NUM);
cc = b->conf.peers.ccs[queue];
vhost_crypto = cryptodev_get_vhost(cc, b, queue);
vhost_virtqueue_mask(&vhost_crypto->dev, dev, idx, mask);
}
bool cryptodev_vhost_virtqueue_pending(VirtIODevice *dev,
int queue, int idx)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev);
CryptoDevBackend *b = vcrypto->cryptodev;
CryptoDevBackendVhost *vhost_crypto;
CryptoDevBackendClient *cc;
assert(queue < MAX_CRYPTO_QUEUE_NUM);
cc = b->conf.peers.ccs[queue];
vhost_crypto = cryptodev_get_vhost(cc, b, queue);
return vhost_virtqueue_pending(&vhost_crypto->dev, idx);
}
#else
uint64_t
cryptodev_vhost_get_max_queues(CryptoDevBackendVhost *crypto)
{
return 0;
}
void cryptodev_vhost_cleanup(CryptoDevBackendVhost *crypto)
{
}
struct CryptoDevBackendVhost *
cryptodev_vhost_init(CryptoDevBackendVhostOptions *options)
{
return NULL;
}
CryptoDevBackendVhost *
cryptodev_get_vhost(CryptoDevBackendClient *cc,
CryptoDevBackend *b,
uint16_t queue)
{
return NULL;
}
int cryptodev_vhost_start(VirtIODevice *dev, int total_queues)
{
return -1;
}
void cryptodev_vhost_stop(VirtIODevice *dev, int total_queues)
{
}
void cryptodev_vhost_virtqueue_mask(VirtIODevice *dev,
int queue,
int idx, bool mask)
{
}
bool cryptodev_vhost_virtqueue_pending(VirtIODevice *dev,
int queue, int idx)
{
return false;
}
#endif

View File

@@ -1,269 +0,0 @@
/*
* QEMU Crypto Device Implementation
*
* Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
*
* Authors:
* Gonglei <arei.gonglei@huawei.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "sysemu/cryptodev.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "qemu/config-file.h"
#include "qom/object_interfaces.h"
#include "hw/virtio/virtio-crypto.h"
static QTAILQ_HEAD(, CryptoDevBackendClient) crypto_clients;
CryptoDevBackendClient *
cryptodev_backend_new_client(const char *model,
const char *name)
{
CryptoDevBackendClient *cc;
cc = g_malloc0(sizeof(CryptoDevBackendClient));
cc->model = g_strdup(model);
if (name) {
cc->name = g_strdup(name);
}
QTAILQ_INSERT_TAIL(&crypto_clients, cc, next);
return cc;
}
void cryptodev_backend_free_client(
CryptoDevBackendClient *cc)
{
QTAILQ_REMOVE(&crypto_clients, cc, next);
g_free(cc->name);
g_free(cc->model);
g_free(cc->info_str);
g_free(cc);
}
void cryptodev_backend_cleanup(
CryptoDevBackend *backend,
Error **errp)
{
CryptoDevBackendClass *bc =
CRYPTODEV_BACKEND_GET_CLASS(backend);
if (bc->cleanup) {
bc->cleanup(backend, errp);
}
}
int64_t cryptodev_backend_sym_create_session(
CryptoDevBackend *backend,
CryptoDevBackendSymSessionInfo *sess_info,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendClass *bc =
CRYPTODEV_BACKEND_GET_CLASS(backend);
if (bc->create_session) {
return bc->create_session(backend, sess_info, queue_index, errp);
}
return -1;
}
int cryptodev_backend_sym_close_session(
CryptoDevBackend *backend,
uint64_t session_id,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendClass *bc =
CRYPTODEV_BACKEND_GET_CLASS(backend);
if (bc->close_session) {
return bc->close_session(backend, session_id, queue_index, errp);
}
return -1;
}
static int cryptodev_backend_sym_operation(
CryptoDevBackend *backend,
CryptoDevBackendSymOpInfo *op_info,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendClass *bc =
CRYPTODEV_BACKEND_GET_CLASS(backend);
if (bc->do_sym_op) {
return bc->do_sym_op(backend, op_info, queue_index, errp);
}
return -VIRTIO_CRYPTO_ERR;
}
int cryptodev_backend_crypto_operation(
CryptoDevBackend *backend,
void *opaque,
uint32_t queue_index, Error **errp)
{
VirtIOCryptoReq *req = opaque;
if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) {
CryptoDevBackendSymOpInfo *op_info;
op_info = req->u.sym_op_info;
return cryptodev_backend_sym_operation(backend,
op_info, queue_index, errp);
} else {
error_setg(errp, "Unsupported cryptodev alg type: %" PRIu32 "",
req->flags);
return -VIRTIO_CRYPTO_NOTSUPP;
}
return -VIRTIO_CRYPTO_ERR;
}
static void
cryptodev_backend_get_queues(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
CryptoDevBackend *backend = CRYPTODEV_BACKEND(obj);
uint32_t value = backend->conf.peers.queues;
visit_type_uint32(v, name, &value, errp);
}
static void
cryptodev_backend_set_queues(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
CryptoDevBackend *backend = CRYPTODEV_BACKEND(obj);
Error *local_err = NULL;
uint32_t value;
visit_type_uint32(v, name, &value, &local_err);
if (local_err) {
goto out;
}
if (!value) {
error_setg(&local_err, "Property '%s.%s' doesn't take value '%"
PRIu32 "'", object_get_typename(obj), name, value);
goto out;
}
backend->conf.peers.queues = value;
out:
error_propagate(errp, local_err);
}
static void
cryptodev_backend_complete(UserCreatable *uc, Error **errp)
{
CryptoDevBackend *backend = CRYPTODEV_BACKEND(uc);
CryptoDevBackendClass *bc = CRYPTODEV_BACKEND_GET_CLASS(uc);
Error *local_err = NULL;
if (bc->init) {
bc->init(backend, &local_err);
if (local_err) {
goto out;
}
}
return;
out:
error_propagate(errp, local_err);
}
void cryptodev_backend_set_used(CryptoDevBackend *backend, bool used)
{
backend->is_used = used;
}
bool cryptodev_backend_is_used(CryptoDevBackend *backend)
{
return backend->is_used;
}
void cryptodev_backend_set_ready(CryptoDevBackend *backend, bool ready)
{
backend->ready = ready;
}
bool cryptodev_backend_is_ready(CryptoDevBackend *backend)
{
return backend->ready;
}
static bool
cryptodev_backend_can_be_deleted(UserCreatable *uc)
{
return !cryptodev_backend_is_used(CRYPTODEV_BACKEND(uc));
}
static void cryptodev_backend_instance_init(Object *obj)
{
object_property_add(obj, "queues", "uint32",
cryptodev_backend_get_queues,
cryptodev_backend_set_queues,
NULL, NULL, NULL);
/* Initialize devices' queues property to 1 */
object_property_set_int(obj, 1, "queues", NULL);
}
static void cryptodev_backend_finalize(Object *obj)
{
CryptoDevBackend *backend = CRYPTODEV_BACKEND(obj);
cryptodev_backend_cleanup(backend, NULL);
}
static void
cryptodev_backend_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
ucc->complete = cryptodev_backend_complete;
ucc->can_be_deleted = cryptodev_backend_can_be_deleted;
QTAILQ_INIT(&crypto_clients);
}
static const TypeInfo cryptodev_backend_info = {
.name = TYPE_CRYPTODEV_BACKEND,
.parent = TYPE_OBJECT,
.instance_size = sizeof(CryptoDevBackend),
.instance_init = cryptodev_backend_instance_init,
.instance_finalize = cryptodev_backend_finalize,
.class_size = sizeof(CryptoDevBackendClass),
.class_init = cryptodev_backend_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
cryptodev_backend_register_types(void)
{
type_register_static(&cryptodev_backend_info);
}
type_init(cryptodev_backend_register_types);

View File

@@ -9,11 +9,9 @@
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "qemu-common.h"
#include "sysemu/hostmem.h"
#include "sysemu/sysemu.h"
#include "qom/object_interfaces.h"
@@ -33,21 +31,14 @@ typedef struct HostMemoryBackendFile HostMemoryBackendFile;
struct HostMemoryBackendFile {
HostMemoryBackend parent_obj;
bool share;
char *mem_path;
uint64_t align;
bool discard_data;
bool is_pmem;
};
static void
file_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
{
#ifndef CONFIG_POSIX
error_setg(errp, "backend '%s' not supported on this host",
object_get_typename(OBJECT(backend)));
#else
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(backend);
gchar *name;
if (!backend->size) {
error_setg(errp, "can't create backend with size 0");
@@ -57,41 +48,30 @@ file_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
error_setg(errp, "mem-path property not set");
return;
}
/*
* Verify pmem file size since starting a guest with an incorrect size
* leads to confusing failures inside the guest.
*/
if (fb->is_pmem) {
Error *local_err = NULL;
uint64_t size;
size = qemu_get_pmem_size(fb->mem_path, &local_err);
if (!size) {
error_propagate(errp, local_err);
return;
}
if (backend->size > size) {
error_setg(errp, "size property %" PRIu64 " is larger than "
"pmem file \"%s\" size %" PRIu64, backend->size,
fb->mem_path, size);
return;
}
#ifndef CONFIG_LINUX
error_setg(errp, "-mem-path not supported on this host");
#else
if (!memory_region_size(&backend->mr)) {
gchar *path;
backend->force_prealloc = mem_prealloc;
path = object_get_canonical_path(OBJECT(backend));
memory_region_init_ram_from_file(&backend->mr, OBJECT(backend),
path,
backend->size, fb->share,
fb->mem_path, errp);
g_free(path);
}
backend->force_prealloc = mem_prealloc;
name = host_memory_backend_get_name(backend);
memory_region_init_ram_from_file(&backend->mr, OBJECT(backend),
name,
backend->size, fb->align,
(backend->share ? RAM_SHARED : 0) |
(fb->is_pmem ? RAM_PMEM : 0),
fb->mem_path, errp);
g_free(name);
#endif
}
static void
file_backend_class_init(ObjectClass *oc, void *data)
{
HostMemoryBackendClass *bc = MEMORY_BACKEND_CLASS(oc);
bc->alloc = file_backend_memory_alloc;
}
static char *get_mem_path(Object *o, Error **errp)
{
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
@@ -104,128 +84,41 @@ static void set_mem_path(Object *o, const char *str, Error **errp)
HostMemoryBackend *backend = MEMORY_BACKEND(o);
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property 'mem-path' of %s",
object_get_typename(o));
if (memory_region_size(&backend->mr)) {
error_setg(errp, "cannot change property value");
return;
}
g_free(fb->mem_path);
fb->mem_path = g_strdup(str);
}
static bool file_memory_backend_get_discard_data(Object *o, Error **errp)
{
return MEMORY_BACKEND_FILE(o)->discard_data;
}
static void file_memory_backend_set_discard_data(Object *o, bool value,
Error **errp)
{
MEMORY_BACKEND_FILE(o)->discard_data = value;
}
static void file_memory_backend_get_align(Object *o, Visitor *v,
const char *name, void *opaque,
Error **errp)
static bool file_memory_backend_get_share(Object *o, Error **errp)
{
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
uint64_t val = fb->align;
visit_type_size(v, name, &val, errp);
return fb->share;
}
static void file_memory_backend_set_align(Object *o, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
Error *local_err = NULL;
uint64_t val;
if (host_memory_backend_mr_inited(backend)) {
error_setg(&local_err, "cannot change property '%s' of %s",
name, object_get_typename(o));
goto out;
}
visit_type_size(v, name, &val, &local_err);
if (local_err) {
goto out;
}
fb->align = val;
out:
error_propagate(errp, local_err);
}
static bool file_memory_backend_get_pmem(Object *o, Error **errp)
{
return MEMORY_BACKEND_FILE(o)->is_pmem;
}
static void file_memory_backend_set_pmem(Object *o, bool value, Error **errp)
static void file_memory_backend_set_share(Object *o, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property 'pmem' of %s.",
object_get_typename(o));
if (memory_region_size(&backend->mr)) {
error_setg(errp, "cannot change property value");
return;
}
#ifndef CONFIG_LIBPMEM
if (value) {
Error *local_err = NULL;
error_setg(&local_err,
"Lack of libpmem support while setting the 'pmem=on'"
" of %s. We can't ensure data persistence.",
object_get_typename(o));
error_propagate(errp, local_err);
return;
}
#endif
fb->is_pmem = value;
}
static void file_backend_unparent(Object *obj)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(obj);
if (host_memory_backend_mr_inited(backend) && fb->discard_data) {
void *ptr = memory_region_get_ram_ptr(&backend->mr);
uint64_t sz = memory_region_size(&backend->mr);
qemu_madvise(ptr, sz, QEMU_MADV_REMOVE);
}
fb->share = value;
}
static void
file_backend_class_init(ObjectClass *oc, void *data)
file_backend_instance_init(Object *o)
{
HostMemoryBackendClass *bc = MEMORY_BACKEND_CLASS(oc);
bc->alloc = file_backend_memory_alloc;
oc->unparent = file_backend_unparent;
object_class_property_add_bool(oc, "discard-data",
file_memory_backend_get_discard_data, file_memory_backend_set_discard_data,
&error_abort);
object_class_property_add_str(oc, "mem-path",
get_mem_path, set_mem_path,
&error_abort);
object_class_property_add(oc, "align", "int",
file_memory_backend_get_align,
file_memory_backend_set_align,
NULL, NULL, &error_abort);
object_class_property_add_bool(oc, "pmem",
file_memory_backend_get_pmem, file_memory_backend_set_pmem,
&error_abort);
object_property_add_bool(o, "share",
file_memory_backend_get_share,
file_memory_backend_set_share, NULL);
object_property_add_str(o, "mem-path", get_mem_path,
set_mem_path, NULL);
}
static void file_backend_instance_finalize(Object *o)
@@ -239,6 +132,7 @@ static const TypeInfo file_backend_info = {
.name = TYPE_MEMORY_BACKEND_FILE,
.parent = TYPE_MEMORY_BACKEND,
.class_init = file_backend_class_init,
.instance_init = file_backend_instance_init,
.instance_finalize = file_backend_instance_finalize,
.instance_size = sizeof(HostMemoryBackendFile),
};

View File

@@ -1,182 +0,0 @@
/*
* QEMU host memfd memory backend
*
* Copyright (C) 2018 Red Hat Inc
*
* Authors:
* Marc-André Lureau <marcandre.lureau@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/hostmem.h"
#include "sysemu/sysemu.h"
#include "qom/object_interfaces.h"
#include "qemu/memfd.h"
#include "qemu/module.h"
#include "qapi/error.h"
#define TYPE_MEMORY_BACKEND_MEMFD "memory-backend-memfd"
#define MEMORY_BACKEND_MEMFD(obj) \
OBJECT_CHECK(HostMemoryBackendMemfd, (obj), TYPE_MEMORY_BACKEND_MEMFD)
typedef struct HostMemoryBackendMemfd HostMemoryBackendMemfd;
struct HostMemoryBackendMemfd {
HostMemoryBackend parent_obj;
bool hugetlb;
uint64_t hugetlbsize;
bool seal;
};
static void
memfd_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
{
HostMemoryBackendMemfd *m = MEMORY_BACKEND_MEMFD(backend);
char *name;
int fd;
if (!backend->size) {
error_setg(errp, "can't create backend with size 0");
return;
}
backend->force_prealloc = mem_prealloc;
fd = qemu_memfd_create(TYPE_MEMORY_BACKEND_MEMFD, backend->size,
m->hugetlb, m->hugetlbsize, m->seal ?
F_SEAL_GROW | F_SEAL_SHRINK | F_SEAL_SEAL : 0,
errp);
if (fd == -1) {
return;
}
name = host_memory_backend_get_name(backend);
memory_region_init_ram_from_fd(&backend->mr, OBJECT(backend),
name, backend->size,
backend->share, fd, errp);
g_free(name);
}
static bool
memfd_backend_get_hugetlb(Object *o, Error **errp)
{
return MEMORY_BACKEND_MEMFD(o)->hugetlb;
}
static void
memfd_backend_set_hugetlb(Object *o, bool value, Error **errp)
{
MEMORY_BACKEND_MEMFD(o)->hugetlb = value;
}
static void
memfd_backend_set_hugetlbsize(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
HostMemoryBackendMemfd *m = MEMORY_BACKEND_MEMFD(obj);
Error *local_err = NULL;
uint64_t value;
if (host_memory_backend_mr_inited(MEMORY_BACKEND(obj))) {
error_setg(&local_err, "cannot change property value");
goto out;
}
visit_type_size(v, name, &value, &local_err);
if (local_err) {
goto out;
}
if (!value) {
error_setg(&local_err, "Property '%s.%s' doesn't take value '%"
PRIu64 "'", object_get_typename(obj), name, value);
goto out;
}
m->hugetlbsize = value;
out:
error_propagate(errp, local_err);
}
static void
memfd_backend_get_hugetlbsize(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
HostMemoryBackendMemfd *m = MEMORY_BACKEND_MEMFD(obj);
uint64_t value = m->hugetlbsize;
visit_type_size(v, name, &value, errp);
}
static bool
memfd_backend_get_seal(Object *o, Error **errp)
{
return MEMORY_BACKEND_MEMFD(o)->seal;
}
static void
memfd_backend_set_seal(Object *o, bool value, Error **errp)
{
MEMORY_BACKEND_MEMFD(o)->seal = value;
}
static void
memfd_backend_instance_init(Object *obj)
{
HostMemoryBackendMemfd *m = MEMORY_BACKEND_MEMFD(obj);
/* default to sealed file */
m->seal = true;
MEMORY_BACKEND(m)->share = true;
}
static void
memfd_backend_class_init(ObjectClass *oc, void *data)
{
HostMemoryBackendClass *bc = MEMORY_BACKEND_CLASS(oc);
bc->alloc = memfd_backend_memory_alloc;
if (qemu_memfd_check(MFD_HUGETLB)) {
object_class_property_add_bool(oc, "hugetlb",
memfd_backend_get_hugetlb,
memfd_backend_set_hugetlb,
&error_abort);
object_class_property_set_description(oc, "hugetlb",
"Use huge pages",
&error_abort);
object_class_property_add(oc, "hugetlbsize", "int",
memfd_backend_get_hugetlbsize,
memfd_backend_set_hugetlbsize,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "hugetlbsize",
"Huge pages size (ex: 2M, 1G)",
&error_abort);
}
object_class_property_add_bool(oc, "seal",
memfd_backend_get_seal,
memfd_backend_set_seal,
&error_abort);
object_class_property_set_description(oc, "seal",
"Seal growing & shrinking",
&error_abort);
}
static const TypeInfo memfd_backend_info = {
.name = TYPE_MEMORY_BACKEND_MEMFD,
.parent = TYPE_MEMORY_BACKEND,
.instance_init = memfd_backend_instance_init,
.class_init = memfd_backend_class_init,
.instance_size = sizeof(HostMemoryBackendMemfd),
};
static void register_types(void)
{
if (qemu_memfd_check(MFD_ALLOW_SEALING)) {
type_register_static(&memfd_backend_info);
}
}
type_init(register_types);

View File

@@ -9,29 +9,28 @@
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/hostmem.h"
#include "qapi/error.h"
#include "qemu/module.h"
#include "qom/object_interfaces.h"
#define TYPE_MEMORY_BACKEND_RAM "memory-backend-ram"
static void
ram_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
{
char *name;
char *path;
if (!backend->size) {
error_setg(errp, "can't create backend with size 0");
return;
}
name = host_memory_backend_get_name(backend);
memory_region_init_ram_shared_nomigrate(&backend->mr, OBJECT(backend), name,
backend->size, backend->share, errp);
g_free(name);
path = object_get_canonical_path_component(OBJECT(backend));
memory_region_init_ram(&backend->mr, OBJECT(backend), path,
backend->size, errp);
g_free(path);
}
static void

View File

@@ -9,16 +9,15 @@
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/hostmem.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "qapi/qapi-builtin-visit.h"
#include "qapi/visitor.h"
#include "qapi-types.h"
#include "qapi-visit.h"
#include "qemu/config-file.h"
#include "qom/object_interfaces.h"
#include "qemu/mmap-alloc.h"
#ifdef CONFIG_NUMA
#include <numaif.h>
@@ -28,16 +27,6 @@ QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_BIND != MPOL_BIND);
QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_INTERLEAVE != MPOL_INTERLEAVE);
#endif
char *
host_memory_backend_get_name(HostMemoryBackend *backend)
{
if (!backend->use_canonical_path) {
return object_get_canonical_path_component(OBJECT(backend));
}
return object_get_canonical_path(OBJECT(backend));
}
static void
host_memory_backend_get_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
@@ -56,9 +45,8 @@ host_memory_backend_set_size(Object *obj, Visitor *v, const char *name,
Error *local_err = NULL;
uint64_t value;
if (host_memory_backend_mr_inited(backend)) {
error_setg(&local_err, "cannot change property %s of %s ",
name, object_get_typename(obj));
if (memory_region_size(&backend->mr)) {
error_setg(&local_err, "cannot change property value");
goto out;
}
@@ -67,9 +55,8 @@ host_memory_backend_set_size(Object *obj, Visitor *v, const char *name,
goto out;
}
if (!value) {
error_setg(&local_err,
"property '%s' of %s doesn't take value '%" PRIu64 "'",
name, object_get_typename(obj), value);
error_setg(&local_err, "Property '%s.%s' doesn't take value '%"
PRIu64 "'", object_get_typename(obj), name, value);
goto out;
}
backend->size = value;
@@ -88,7 +75,7 @@ host_memory_backend_get_host_nodes(Object *obj, Visitor *v, const char *name,
value = find_first_bit(backend->host_nodes, MAX_NODES);
if (value == MAX_NODES) {
goto ret;
return;
}
*node = g_malloc0(sizeof(**node));
@@ -106,7 +93,6 @@ host_memory_backend_get_host_nodes(Object *obj, Visitor *v, const char *name,
node = &(*node)->next;
} while (true);
ret:
visit_type_uint16List(v, name, &host_nodes, errp);
}
@@ -116,23 +102,14 @@ host_memory_backend_set_host_nodes(Object *obj, Visitor *v, const char *name,
{
#ifdef CONFIG_NUMA
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint16List *l, *host_nodes = NULL;
uint16List *l = NULL;
visit_type_uint16List(v, name, &host_nodes, errp);
visit_type_uint16List(v, name, &l, errp);
for (l = host_nodes; l; l = l->next) {
if (l->value >= MAX_NODES) {
error_setg(errp, "Invalid host-nodes value: %d", l->value);
goto out;
}
}
for (l = host_nodes; l; l = l->next) {
while (l) {
bitmap_set(backend->host_nodes, l->value, 1);
l = l->next;
}
out:
qapi_free_uint16List(host_nodes);
#else
error_setg(errp, "NUMA node binding are not supported by this QEMU");
#endif
@@ -169,7 +146,7 @@ static void host_memory_backend_set_merge(Object *obj, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
if (!host_memory_backend_mr_inited(backend)) {
if (!memory_region_size(&backend->mr)) {
backend->merge = value;
return;
}
@@ -195,7 +172,7 @@ static void host_memory_backend_set_dump(Object *obj, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
if (!host_memory_backend_mr_inited(backend)) {
if (!memory_region_size(&backend->mr)) {
backend->dump = value;
return;
}
@@ -220,7 +197,6 @@ static bool host_memory_backend_get_prealloc(Object *obj, Error **errp)
static void host_memory_backend_set_prealloc(Object *obj, bool value,
Error **errp)
{
Error *local_err = NULL;
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
if (backend->force_prealloc) {
@@ -231,7 +207,7 @@ static void host_memory_backend_set_prealloc(Object *obj, bool value,
}
}
if (!host_memory_backend_mr_inited(backend)) {
if (!memory_region_size(&backend->mr)) {
backend->prealloc = value;
return;
}
@@ -241,11 +217,7 @@ static void host_memory_backend_set_prealloc(Object *obj, bool value,
void *ptr = memory_region_get_ram_ptr(&backend->mr);
uint64_t sz = memory_region_size(&backend->mr);
os_mem_prealloc(fd, ptr, sz, smp_cpus, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
os_mem_prealloc(fd, ptr, sz);
backend->prealloc = true;
}
}
@@ -258,54 +230,34 @@ static void host_memory_backend_init(Object *obj)
backend->merge = machine_mem_merge(machine);
backend->dump = machine_dump_guest_core(machine);
backend->prealloc = mem_prealloc;
object_property_add_bool(obj, "merge",
host_memory_backend_get_merge,
host_memory_backend_set_merge, NULL);
object_property_add_bool(obj, "dump",
host_memory_backend_get_dump,
host_memory_backend_set_dump, NULL);
object_property_add_bool(obj, "prealloc",
host_memory_backend_get_prealloc,
host_memory_backend_set_prealloc, NULL);
object_property_add(obj, "size", "int",
host_memory_backend_get_size,
host_memory_backend_set_size, NULL, NULL, NULL);
object_property_add(obj, "host-nodes", "int",
host_memory_backend_get_host_nodes,
host_memory_backend_set_host_nodes, NULL, NULL, NULL);
object_property_add_enum(obj, "policy", "HostMemPolicy",
HostMemPolicy_lookup,
host_memory_backend_get_policy,
host_memory_backend_set_policy, NULL);
}
static void host_memory_backend_post_init(Object *obj)
MemoryRegion *
host_memory_backend_get_memory(HostMemoryBackend *backend, Error **errp)
{
object_apply_compat_props(obj);
return memory_region_size(&backend->mr) ? &backend->mr : NULL;
}
bool host_memory_backend_mr_inited(HostMemoryBackend *backend)
{
/*
* NOTE: We forbid zero-length memory backend, so here zero means
* "we haven't inited the backend memory region yet".
*/
return memory_region_size(&backend->mr) != 0;
}
MemoryRegion *host_memory_backend_get_memory(HostMemoryBackend *backend)
{
return host_memory_backend_mr_inited(backend) ? &backend->mr : NULL;
}
void host_memory_backend_set_mapped(HostMemoryBackend *backend, bool mapped)
{
backend->is_mapped = mapped;
}
bool host_memory_backend_is_mapped(HostMemoryBackend *backend)
{
return backend->is_mapped;
}
#ifdef __linux__
size_t host_memory_backend_pagesize(HostMemoryBackend *memdev)
{
Object *obj = OBJECT(memdev);
char *path = object_property_get_str(obj, "mem-path", NULL);
size_t pagesize = qemu_mempath_getpagesize(path);
g_free(path);
return pagesize;
}
#else
size_t host_memory_backend_pagesize(HostMemoryBackend *memdev)
{
return getpagesize();
}
#endif
static void
host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
{
@@ -318,7 +270,8 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
if (bc->alloc) {
bc->alloc(backend, &local_err);
if (local_err) {
goto out;
error_propagate(errp, local_err);
return;
}
ptr = memory_region_get_ram_ptr(&backend->mr);
@@ -348,7 +301,7 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
return;
} else if (maxnode == 0 && backend->policy != MPOL_DEFAULT) {
error_setg(errp, "host-nodes must be set for policy %s",
HostMemPolicy_str(backend->policy));
HostMemPolicy_lookup[backend->policy]);
return;
}
@@ -374,62 +327,24 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
* specified NUMA policy in place.
*/
if (backend->prealloc) {
os_mem_prealloc(memory_region_get_fd(&backend->mr), ptr, sz,
smp_cpus, &local_err);
if (local_err) {
goto out;
}
os_mem_prealloc(memory_region_get_fd(&backend->mr), ptr, sz);
}
}
out:
error_propagate(errp, local_err);
}
static bool
host_memory_backend_can_be_deleted(UserCreatable *uc)
host_memory_backend_can_be_deleted(UserCreatable *uc, Error **errp)
{
if (host_memory_backend_is_mapped(MEMORY_BACKEND(uc))) {
MemoryRegion *mr;
mr = host_memory_backend_get_memory(MEMORY_BACKEND(uc), errp);
if (memory_region_is_mapped(mr)) {
return false;
} else {
return true;
}
}
static bool host_memory_backend_get_share(Object *o, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
return backend->share;
}
static void host_memory_backend_set_share(Object *o, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property value");
return;
}
backend->share = value;
}
static bool
host_memory_backend_get_use_canonical_path(Object *obj, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
return backend->use_canonical_path;
}
static void
host_memory_backend_set_use_canonical_path(Object *obj, bool value,
Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
backend->use_canonical_path = value;
}
static void
host_memory_backend_class_init(ObjectClass *oc, void *data)
{
@@ -437,48 +352,6 @@ host_memory_backend_class_init(ObjectClass *oc, void *data)
ucc->complete = host_memory_backend_memory_complete;
ucc->can_be_deleted = host_memory_backend_can_be_deleted;
object_class_property_add_bool(oc, "merge",
host_memory_backend_get_merge,
host_memory_backend_set_merge, &error_abort);
object_class_property_set_description(oc, "merge",
"Mark memory as mergeable", &error_abort);
object_class_property_add_bool(oc, "dump",
host_memory_backend_get_dump,
host_memory_backend_set_dump, &error_abort);
object_class_property_set_description(oc, "dump",
"Set to 'off' to exclude from core dump", &error_abort);
object_class_property_add_bool(oc, "prealloc",
host_memory_backend_get_prealloc,
host_memory_backend_set_prealloc, &error_abort);
object_class_property_set_description(oc, "prealloc",
"Preallocate memory", &error_abort);
object_class_property_add(oc, "size", "int",
host_memory_backend_get_size,
host_memory_backend_set_size,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "size",
"Size of the memory region (ex: 500M)", &error_abort);
object_class_property_add(oc, "host-nodes", "int",
host_memory_backend_get_host_nodes,
host_memory_backend_set_host_nodes,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "host-nodes",
"Binds memory to the list of NUMA host nodes", &error_abort);
object_class_property_add_enum(oc, "policy", "HostMemPolicy",
&HostMemPolicy_lookup,
host_memory_backend_get_policy,
host_memory_backend_set_policy, &error_abort);
object_class_property_set_description(oc, "policy",
"Set the NUMA policy", &error_abort);
object_class_property_add_bool(oc, "share",
host_memory_backend_get_share, host_memory_backend_set_share,
&error_abort);
object_class_property_set_description(oc, "share",
"Mark the memory as private to QEMU or shared", &error_abort);
object_class_property_add_bool(oc, "x-use-canonical-path-for-ramblock-id",
host_memory_backend_get_use_canonical_path,
host_memory_backend_set_use_canonical_path, &error_abort);
}
static const TypeInfo host_memory_backend_info = {
@@ -489,7 +362,6 @@ static const TypeInfo host_memory_backend_info = {
.class_init = host_memory_backend_class_init,
.instance_size = sizeof(HostMemoryBackend),
.instance_init = host_memory_backend_init,
.instance_post_init = host_memory_backend_post_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }

93
backends/msmouse.c Normal file
View File

@@ -0,0 +1,93 @@
/*
* QEMU Microsoft serial mouse emulation
*
* Copyright (c) 2008 Lubomir Rintel
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "sysemu/char.h"
#include "ui/console.h"
#define MSMOUSE_LO6(n) ((n) & 0x3f)
#define MSMOUSE_HI2(n) (((n) & 0xc0) >> 6)
static void msmouse_event(void *opaque,
int dx, int dy, int dz, int buttons_state)
{
CharDriverState *chr = (CharDriverState *)opaque;
unsigned char bytes[4] = { 0x40, 0x00, 0x00, 0x00 };
/* Movement deltas */
bytes[0] |= (MSMOUSE_HI2(dy) << 2) | MSMOUSE_HI2(dx);
bytes[1] |= MSMOUSE_LO6(dx);
bytes[2] |= MSMOUSE_LO6(dy);
/* Buttons */
bytes[0] |= (buttons_state & 0x01 ? 0x20 : 0x00);
bytes[0] |= (buttons_state & 0x02 ? 0x10 : 0x00);
bytes[3] |= (buttons_state & 0x04 ? 0x20 : 0x00);
/* We always send the packet of, so that we do not have to keep track
of previous state of the middle button. This can potentially confuse
some very old drivers for two button mice though. */
qemu_chr_be_write(chr, bytes, 4);
}
static int msmouse_chr_write (struct CharDriverState *s, const uint8_t *buf, int len)
{
/* Ignore writes to mouse port */
return len;
}
static void msmouse_chr_close (struct CharDriverState *chr)
{
g_free (chr);
}
static CharDriverState *qemu_chr_open_msmouse(const char *id,
ChardevBackend *backend,
ChardevReturn *ret,
Error **errp)
{
ChardevCommon *common = backend->u.msmouse.data;
CharDriverState *chr;
chr = qemu_chr_alloc(common, errp);
if (!chr) {
return NULL;
}
chr->chr_write = msmouse_chr_write;
chr->chr_close = msmouse_chr_close;
chr->explicit_be_open = true;
qemu_add_mouse_event_handler(msmouse_event, chr, 0, "QEMU Microsoft Mouse");
return chr;
}
static void register_types(void)
{
register_char_driver("msmouse", CHARDEV_BACKEND_KIND_MSMOUSE, NULL,
qemu_chr_open_msmouse);
}
type_init(register_types);

View File

@@ -12,10 +12,10 @@
#include "qemu/osdep.h"
#include "sysemu/rng.h"
#include "chardev/char-fe.h"
#include "sysemu/char.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/module.h"
#include "hw/qdev.h" /* just for DEFINE_PROP_CHR */
#define TYPE_RNG_EGD "rng-egd"
#define RNG_EGD(obj) OBJECT_CHECK(RngEgd, (obj), TYPE_RNG_EGD)
@@ -24,7 +24,7 @@ typedef struct RngEgd
{
RngBackend parent;
CharBackend chr;
CharDriverState *chr;
char *chr_name;
} RngEgd;
@@ -41,9 +41,7 @@ static void rng_egd_request_entropy(RngBackend *b, RngRequest *req)
header[0] = 0x02;
header[1] = len;
/* XXX this blocks entire thread. Rewrite to use
* qemu_chr_fe_write and background I/O callbacks */
qemu_chr_fe_write_all(&s->chr, header, sizeof(header));
qemu_chr_fe_write(s->chr, header, sizeof(header));
size -= len;
}
@@ -87,7 +85,6 @@ static void rng_egd_chr_read(void *opaque, const uint8_t *buf, int size)
static void rng_egd_opened(RngBackend *b, Error **errp)
{
RngEgd *s = RNG_EGD(b);
Chardev *chr;
if (s->chr_name == NULL) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
@@ -95,19 +92,21 @@ static void rng_egd_opened(RngBackend *b, Error **errp)
return;
}
chr = qemu_chr_find(s->chr_name);
if (chr == NULL) {
s->chr = qemu_chr_find(s->chr_name);
if (s->chr == NULL) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", s->chr_name);
return;
}
if (!qemu_chr_fe_init(&s->chr, chr, errp)) {
if (qemu_chr_fe_claim(s->chr) != 0) {
error_setg(errp, QERR_DEVICE_IN_USE, s->chr_name);
return;
}
/* FIXME we should resubmit pending requests when the CDS reconnects. */
qemu_chr_fe_set_handlers(&s->chr, rng_egd_chr_can_read,
rng_egd_chr_read, NULL, NULL, s, NULL, true);
qemu_chr_add_handlers(s->chr, rng_egd_chr_can_read, rng_egd_chr_read,
NULL, s);
}
static void rng_egd_set_chardev(Object *obj, const char *value, Error **errp)
@@ -126,10 +125,9 @@ static void rng_egd_set_chardev(Object *obj, const char *value, Error **errp)
static char *rng_egd_get_chardev(Object *obj, Error **errp)
{
RngEgd *s = RNG_EGD(obj);
Chardev *chr = qemu_chr_fe_get_driver(&s->chr);
if (chr && chr->label) {
return g_strdup(chr->label);
if (s->chr && s->chr->label) {
return g_strdup(s->chr->label);
}
return NULL;
@@ -146,7 +144,11 @@ static void rng_egd_finalize(Object *obj)
{
RngEgd *s = RNG_EGD(obj);
qemu_chr_fe_deinit(&s->chr, false);
if (s->chr) {
qemu_chr_add_handlers(s->chr, NULL, NULL, NULL, NULL);
qemu_chr_fe_release(s->chr);
}
g_free(s->chr_name);
}

View File

@@ -16,9 +16,8 @@
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
struct RngRandom
struct RndRandom
{
RngBackend parent;
@@ -35,7 +34,7 @@ struct RngRandom
static void entropy_available(void *opaque)
{
RngRandom *s = RNG_RANDOM(opaque);
RndRandom *s = RNG_RANDOM(opaque);
while (!QSIMPLEQ_EMPTY(&s->parent.requests)) {
RngRequest *req = QSIMPLEQ_FIRST(&s->parent.requests);
@@ -58,7 +57,7 @@ static void entropy_available(void *opaque)
static void rng_random_request_entropy(RngBackend *b, RngRequest *req)
{
RngRandom *s = RNG_RANDOM(b);
RndRandom *s = RNG_RANDOM(b);
if (QSIMPLEQ_EMPTY(&s->parent.requests)) {
/* If there are no pending requests yet, we need to
@@ -69,7 +68,7 @@ static void rng_random_request_entropy(RngBackend *b, RngRequest *req)
static void rng_random_opened(RngBackend *b, Error **errp)
{
RngRandom *s = RNG_RANDOM(b);
RndRandom *s = RNG_RANDOM(b);
if (s->filename == NULL) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
@@ -84,7 +83,7 @@ static void rng_random_opened(RngBackend *b, Error **errp)
static char *rng_random_get_filename(Object *obj, Error **errp)
{
RngRandom *s = RNG_RANDOM(obj);
RndRandom *s = RNG_RANDOM(obj);
return g_strdup(s->filename);
}
@@ -93,7 +92,7 @@ static void rng_random_set_filename(Object *obj, const char *filename,
Error **errp)
{
RngBackend *b = RNG_BACKEND(obj);
RngRandom *s = RNG_RANDOM(obj);
RndRandom *s = RNG_RANDOM(obj);
if (b->opened) {
error_setg(errp, QERR_PERMISSION_DENIED);
@@ -106,7 +105,7 @@ static void rng_random_set_filename(Object *obj, const char *filename,
static void rng_random_init(Object *obj)
{
RngRandom *s = RNG_RANDOM(obj);
RndRandom *s = RNG_RANDOM(obj);
object_property_add_str(obj, "filename",
rng_random_get_filename,
@@ -119,7 +118,7 @@ static void rng_random_init(Object *obj)
static void rng_random_finalize(Object *obj)
{
RngRandom *s = RNG_RANDOM(obj);
RndRandom *s = RNG_RANDOM(obj);
if (s->fd != -1) {
qemu_set_fd_handler(s->fd, NULL, NULL, NULL);
@@ -140,7 +139,7 @@ static void rng_random_class_init(ObjectClass *klass, void *data)
static const TypeInfo rng_random_info = {
.name = TYPE_RNG_RANDOM,
.parent = TYPE_RNG_BACKEND,
.instance_size = sizeof(RngRandom),
.instance_size = sizeof(RndRandom),
.class_init = rng_random_class_init,
.instance_init = rng_random_init,
.instance_finalize = rng_random_finalize,

View File

@@ -14,7 +14,6 @@
#include "sysemu/rng.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/module.h"
#include "qom/object_interfaces.h"
void rng_backend_request_entropy(RngBackend *s, size_t size,

136
backends/testdev.c Normal file
View File

@@ -0,0 +1,136 @@
/*
* QEMU Char Device for testsuite control
*
* Copyright (c) 2014 Red Hat, Inc.
*
* Author: Paolo Bonzini <pbonzini@redhat.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "sysemu/char.h"
#define BUF_SIZE 32
typedef struct {
CharDriverState *chr;
uint8_t in_buf[32];
int in_buf_used;
} TestdevCharState;
/* Try to interpret a whole incoming packet */
static int testdev_eat_packet(TestdevCharState *testdev)
{
const uint8_t *cur = testdev->in_buf;
int len = testdev->in_buf_used;
uint8_t c;
int arg;
#define EAT(c) do { \
if (!len--) { \
return 0; \
} \
c = *cur++; \
} while (0)
EAT(c);
while (isspace(c)) {
EAT(c);
}
arg = 0;
while (isdigit(c)) {
arg = arg * 10 + c - '0';
EAT(c);
}
while (isspace(c)) {
EAT(c);
}
switch (c) {
case 'q':
exit((arg << 1) | 1);
break;
default:
break;
}
return cur - testdev->in_buf;
}
/* The other end is writing some data. Store it and try to interpret */
static int testdev_write(CharDriverState *chr, const uint8_t *buf, int len)
{
TestdevCharState *testdev = chr->opaque;
int tocopy, eaten, orig_len = len;
while (len) {
/* Complete our buffer as much as possible */
tocopy = MIN(len, BUF_SIZE - testdev->in_buf_used);
memcpy(testdev->in_buf + testdev->in_buf_used, buf, tocopy);
testdev->in_buf_used += tocopy;
buf += tocopy;
len -= tocopy;
/* Interpret it as much as possible */
while (testdev->in_buf_used > 0 &&
(eaten = testdev_eat_packet(testdev)) > 0) {
memmove(testdev->in_buf, testdev->in_buf + eaten,
testdev->in_buf_used - eaten);
testdev->in_buf_used -= eaten;
}
}
return orig_len;
}
static void testdev_close(struct CharDriverState *chr)
{
TestdevCharState *testdev = chr->opaque;
g_free(testdev);
}
static CharDriverState *chr_testdev_init(const char *id,
ChardevBackend *backend,
ChardevReturn *ret,
Error **errp)
{
TestdevCharState *testdev;
CharDriverState *chr;
testdev = g_new0(TestdevCharState, 1);
testdev->chr = chr = g_new0(CharDriverState, 1);
chr->opaque = testdev;
chr->chr_write = testdev_write;
chr->chr_close = testdev_close;
return chr;
}
static void register_types(void)
{
register_char_driver("testdev", CHARDEV_BACKEND_KIND_TESTDEV, NULL,
chr_testdev_init);
}
type_init(register_types);

View File

@@ -15,194 +15,184 @@
#include "qemu/osdep.h"
#include "sysemu/tpm_backend.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "sysemu/tpm.h"
#include "qemu/thread.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
#include "block/thread-pool.h"
#include "qemu/error-report.h"
static void tpm_backend_request_completed(void *opaque, int ret)
{
TPMBackend *s = TPM_BACKEND(opaque);
TPMIfClass *tic = TPM_IF_GET_CLASS(s->tpmif);
tic->request_completed(s->tpmif, ret);
/* no need for atomic, as long the BQL is taken */
s->cmd = NULL;
object_unref(OBJECT(s));
}
static int tpm_backend_worker_thread(gpointer data)
{
TPMBackend *s = TPM_BACKEND(data);
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
Error *err = NULL;
k->handle_request(s, s->cmd, &err);
if (err) {
error_report_err(err);
return -1;
}
return 0;
}
void tpm_backend_finish_sync(TPMBackend *s)
{
while (s->cmd) {
aio_poll(qemu_get_aio_context(), true);
}
}
#include "sysemu/tpm_backend_int.h"
enum TpmType tpm_backend_get_type(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->type;
return k->ops->type;
}
int tpm_backend_init(TPMBackend *s, TPMIf *tpmif, Error **errp)
const char *tpm_backend_get_desc(TPMBackend *s)
{
if (s->tpmif) {
error_setg(errp, "TPM backend '%s' is already initialized", s->id);
return -1;
}
s->tpmif = tpmif;
object_ref(OBJECT(tpmif));
s->had_startup_error = false;
return 0;
}
int tpm_backend_startup_tpm(TPMBackend *s, size_t buffersize)
{
int res = 0;
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
/* terminate a running TPM */
tpm_backend_finish_sync(s);
return k->ops->desc();
}
res = k->startup_tpm ? k->startup_tpm(s, buffersize) : 0;
void tpm_backend_destroy(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
s->had_startup_error = (res != 0);
k->ops->destroy(s);
}
return res;
int tpm_backend_init(TPMBackend *s, TPMState *state,
TPMRecvDataCB *datacb)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->ops->init(s, state, datacb);
}
int tpm_backend_startup_tpm(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->ops->startup_tpm(s);
}
bool tpm_backend_had_startup_error(TPMBackend *s)
{
return s->had_startup_error;
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->ops->had_startup_error(s);
}
void tpm_backend_deliver_request(TPMBackend *s, TPMBackendCmd *cmd)
size_t tpm_backend_realloc_buffer(TPMBackend *s, TPMSizedBuffer *sb)
{
ThreadPool *pool = aio_get_thread_pool(qemu_get_aio_context());
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
if (s->cmd != NULL) {
error_report("There is a TPM request pending");
return;
}
return k->ops->realloc_buffer(sb);
}
s->cmd = cmd;
object_ref(OBJECT(s));
thread_pool_submit_aio(pool, tpm_backend_worker_thread, s,
tpm_backend_request_completed, s);
void tpm_backend_deliver_request(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
k->ops->deliver_request(s);
}
void tpm_backend_reset(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
if (k->reset) {
k->reset(s);
}
tpm_backend_finish_sync(s);
s->had_startup_error = false;
k->ops->reset(s);
}
void tpm_backend_cancel_cmd(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
k->cancel_cmd(s);
k->ops->cancel_cmd(s);
}
bool tpm_backend_get_tpm_established_flag(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->get_tpm_established_flag ?
k->get_tpm_established_flag(s) : false;
return k->ops->get_tpm_established_flag(s);
}
int tpm_backend_reset_tpm_established_flag(TPMBackend *s, uint8_t locty)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->reset_tpm_established_flag ?
k->reset_tpm_established_flag(s, locty) : 0;
return k->ops->reset_tpm_established_flag(s, locty);
}
TPMVersion tpm_backend_get_tpm_version(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->get_tpm_version(s);
return k->ops->get_tpm_version(s);
}
size_t tpm_backend_get_buffer_size(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->get_buffer_size(s);
}
TPMInfo *tpm_backend_query_tpm(TPMBackend *s)
{
TPMInfo *info = g_new0(TPMInfo, 1);
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
TPMIfClass *tic = TPM_IF_GET_CLASS(s->tpmif);
info->id = g_strdup(s->id);
info->model = tic->model;
info->options = k->get_tpm_options(s);
return info;
}
static void tpm_backend_instance_finalize(Object *obj)
static bool tpm_backend_prop_get_opened(Object *obj, Error **errp)
{
TPMBackend *s = TPM_BACKEND(obj);
object_unref(OBJECT(s->tpmif));
g_free(s->id);
return s->opened;
}
void tpm_backend_open(TPMBackend *s, Error **errp)
{
object_property_set_bool(OBJECT(s), true, "opened", errp);
}
static void tpm_backend_prop_set_opened(Object *obj, bool value, Error **errp)
{
TPMBackend *s = TPM_BACKEND(obj);
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
Error *local_err = NULL;
if (value == s->opened) {
return;
}
if (!value && s->opened) {
error_setg(errp, QERR_PERMISSION_DENIED);
return;
}
if (k->opened) {
k->opened(s, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
}
s->opened = true;
}
static void tpm_backend_instance_init(Object *obj)
{
object_property_add_bool(obj, "opened",
tpm_backend_prop_get_opened,
tpm_backend_prop_set_opened,
NULL);
}
void tpm_backend_thread_deliver_request(TPMBackendThread *tbt)
{
g_thread_pool_push(tbt->pool, (gpointer)TPM_BACKEND_CMD_PROCESS_CMD, NULL);
}
void tpm_backend_thread_create(TPMBackendThread *tbt,
GFunc func, gpointer user_data)
{
if (!tbt->pool) {
tbt->pool = g_thread_pool_new(func, user_data, 1, TRUE, NULL);
g_thread_pool_push(tbt->pool, (gpointer)TPM_BACKEND_CMD_INIT, NULL);
}
}
void tpm_backend_thread_end(TPMBackendThread *tbt)
{
if (tbt->pool) {
g_thread_pool_push(tbt->pool, (gpointer)TPM_BACKEND_CMD_END, NULL);
g_thread_pool_free(tbt->pool, FALSE, TRUE);
tbt->pool = NULL;
}
}
static const TypeInfo tpm_backend_info = {
.name = TYPE_TPM_BACKEND,
.parent = TYPE_OBJECT,
.instance_size = sizeof(TPMBackend),
.instance_finalize = tpm_backend_instance_finalize,
.instance_init = tpm_backend_instance_init,
.class_size = sizeof(TPMBackendClass),
.abstract = true,
};
static const TypeInfo tpm_if_info = {
.name = TYPE_TPM_IF,
.parent = TYPE_INTERFACE,
.class_size = sizeof(TPMIfClass),
};
static void register_types(void)
{
type_register_static(&tpm_backend_info);
type_register_static(&tpm_if_info);
}
type_init(register_types);

Some files were not shown because too many files have changed in this diff Show More