Compare commits

..

60 Commits

Author SHA1 Message Date
Michael Roth
32d24131b2 Update version for 2.4.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-31 12:39:47 -05:00
Pavel Butsykin
fc63922556 virtio: sync the dataplane vring state to the virtqueue before virtio_save
When creating snapshot with the dataplane enabled, the snapshot file gets
not the actual state of virtqueue, because the current state is stored in
VirtIOBlockDataPlane. Therefore, before saving snapshot need to sync
the dataplane vring state to the virtqueue. The dataplane will resume its
work at the next notify virtqueue.

When snapshot loads with loadvm we get a message:
VQ 0 size 0x80 Guest index 0x15f5 inconsistent with Host index 0x0:
    delta 0x15f5
error while loading state for instance 0x0 of device
    '0000:00:08.0/virtio-blk'
Error -1 while loading VM state

to reproduce the error I used the following hmp commands:
savevm snap1
loadvm snap1

qemu parameters:
--enable-kvm -smp 4 -m 1024 -drive file=/var/lib/libvirt/images/centos6.4.qcow2,if=none,id=drive-virtio-disk0,format=qcow2,cache=none,aio=native -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x8,drive=drive-virtio-disk0,id=virtio-disk0 -set device.virtio-disk0.x-data-plane=on

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1445859777-2982-1-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 10a06fd65f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-31 12:39:47 -05:00
Max Filippov
36e1eee760 target-xtensa: add window overflow check to L32E/S32E
Despite L32E and S32E primary use is for window underflow and overflow
exception handlers they are just normal instructions, and thus need to
check for window overflow.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit f822b7e497)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-31 12:35:17 -05:00
Michael S. Tsirkin
9137bd24c8 net: don't set native endianness
commit 5be7d9f1b1
    vhost-net: tell tap backend about the vnet endianness
makes vhost net always try to set LE - even if that matches the
native endian-ness.

This makes it fail on older kernels on x86 without TUNSETVNETLE support.

To fix, make qemu_set_vnet_le/qemu_set_vnet_be skip the
ioctl if it matches the host endian-ness.

Reported-by: Marcel Apfelbaum <marcel@redhat.com>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
(cherry picked from commit 052bd52fa9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-31 12:35:16 -05:00
Markus Armbruster
08231cbb76 device-introspect-test: New, covering device introspection
The test doesn't check that the output makes any sense, only that QEMU
survives.  Useful since we've had an astounding number of crash bugs
around there.

In fact, we have a bunch of them right now: a few devices crash or
hang, and some leave dangling pointers behind.  The test skips testing
the broken parts.  The next commits will fix them up, and drop the
skipping.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1443689999-12182-8-git-send-email-armbru@redhat.com>
(cherry picked from commit 2d1abb850f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-28 14:50:11 -05:00
Markus Armbruster
70a4483abb libqtest: New hmp() & friends
New convenience function hmp() to facilitate use of
human-monitor-command in tests.  Use it to simplify its existing uses.

To blend into existing libqtest code, also add qtest_hmpv() and
qtest_hmp().  That, and the egregiously verbose GTK-Doc comment format
make this patch look bigger than it is.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1443689999-12182-7-git-send-email-armbru@redhat.com>
(cherry picked from commit 5fb48d9673)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-28 14:50:05 -05:00
Markus Armbruster
39809852a7 tests: Fix how qom-test is run
We want to run qom-test for every architecture, without having to
manually add it to every architecture's list of tests.  Commit 3687d53
accomplished this by adding it to every architecture's list
automatically.

However, some architectures inherit their tests from others, like this:

    check-qtest-x86_64-y = $(check-qtest-i386-y)
    check-qtest-microblazeel-y = $(check-qtest-microblaze-y)
    check-qtest-xtensaeb-y = $(check-qtest-xtensa-y)

For such architectures, we ended up running the (slow!) test twice.
Commit 2b8419c attempted to avoid this by adding the test only when
it's not already present.  Works only as long as we consider adding
the test to the architectures on the left hand side *after* the ones
on the right hand side: x86_64 after i386, microblazeel after
microblaze, xtensaeb after xtensa.

Turns out we consider them in $(SYSEMU_TARGET_LIST) order.  Defined as

    SYSEMU_TARGET_LIST := $(subst -softmmu.mak,,$(notdir \
       $(wildcard $(SRC_PATH)/default-configs/*-softmmu.mak)))

On my machine, this results in the oder xtensa, x86_64, microblazeel,
microblaze, i386.  Consequently, qom-test runs twice for microblazeel
and x86_64.

Replace this complex and flawed machinery with a much simpler one: add
generic tests (currently just qom-test) to check-qtest-generic-y
instead of check-qtest-$(target)-y for every target, then run
$(check-qtest-generic-y) for every target.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-Id: <1443689999-12182-5-git-send-email-armbru@redhat.com>
(cherry picked from commit e253c28715)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-28 14:50:00 -05:00
Paolo Bonzini
db97d9d886 macio: move DBDMA_init from instance_init to realize
DBDMA_init is not idempotent, and calling it from instance_init
breaks a simple object_new/object_unref pair.  Work around this,
pending qdev-ification of DBDMA, by moving the call to realize.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1443689999-12182-4-git-send-email-armbru@redhat.com>
(cherry picked from commit c710440235)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-28 14:49:54 -05:00
Paolo Bonzini
243b80c9c5 hw: do not pass NULL to memory_region_init from instance_init
This causes the region to outlive the object, because it attaches the
region to /machine.  This is not nice for the "realize" method, but
much worse for "instance_init" because it can cause dangling pointers
after a simple object_new/object_unref pair.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1443689999-12182-3-git-send-email-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 81e0ab48dd)

Conflicts:
	hw/display/cg3.c
	hw/display/tcx.c

* removed context dependencies on &error_fatal/&error_abort

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-28 14:48:40 -05:00
Paolo Bonzini
91232d98da memory: allow destroying a non-empty MemoryRegion
This is legal; the MemoryRegion will simply unreference all the
existing subregions and possibly bring them down with it as well.
However, it requires a bit of care to avoid an infinite loop.
Finalizing a memory region cannot trigger an address space update,
but memory_region_del_subregion errs on the side of caution and
might trigger a spurious update: avoid that by resetting mr->enabled
first.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1443689999-12182-2-git-send-email-armbru@redhat.com>
(cherry picked from commit 2e2b8eb70f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-28 14:46:06 -05:00
Markus Armbruster
d68ba3cab3 update-linux-headers: Rename SW_MAX to SW_MAX_
The next commit will compile hw/input/virtio-input.c and
hw/input/virtio-input-hid.c even when CONFIG_LINUX is off.  These
files include both "include/standard-headers/linux/input.h" and
<windows.h> then.  Doesn't work, because both define SW_MAX.  We don't
actually use it.  Patch input.h to define SW_MAX_ instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1444320700-26260-2-git-send-email-armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit ac98fa849e)

Conflicts:
	scripts/update-linux-headers.sh

* remove dependency on eddb4de3

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-28 14:45:14 -05:00
Paolo Bonzini
381a290266 trace: remove malloc tracing
The malloc vtable is not supported anymore in glib, because it broke
when constructors called g_malloc.  Remove tracing of g_malloc,
g_realloc and g_free calls.

Note that, for systemtap users, glib also provides tracepoints
glib.mem_alloc, glib.mem_free, glib.mem_realloc, glib.slice_alloc
and glib.slice_free.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1442417924-25831-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 98cf48f60a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-28 14:34:11 -05:00
Jason Wang
696317f189 virtio-net: correctly drop truncated packets
When packet is truncated during receiving, we drop the packets but
neither discard the descriptor nor add and signal used
descriptor. This will lead several issues:

- sg mappings are leaked
- rx will be stalled if a lots of packets were truncated

In order to be consistent with vhost, fix by discarding the descriptor
in this case.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit 0cf33fb6b4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 13:40:28 -05:00
Jason Wang
c2a550d3df virtio: introduce virtqueue_discard()
This patch introduces virtqueue_discard() to discard a descriptor and
unmap the sgs. This will be used by the patch that will discard
descriptor when packet is truncated.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit 29b9f5efd7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 13:40:24 -05:00
Jason Wang
a64d4cafa9 virtio: introduce virtqueue_unmap_sg()
Factor out sg unmapping logic. This will be reused by the patch that
can discard descriptor.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Andrew James <andrew.james@hpe.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit ce31746157)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 13:40:18 -05:00
Gerd Hoffmann
2f99c80963 virtio-input: ignore events until the guest driver is ready
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit d9460a7557)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 12:35:21 -05:00
Dr. David Alan Gilbert
f62c10bd20 Migration: Generate the completed event only when we complete
The current migration-completed event is generated a bit too early,
which means that an eager libvirt that's ready to go as soon
as it sees the event ends up racing with the actual end of migration.

This corresponds to RH bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1271145

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
xSigned-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit ed1f3e0090)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 11:28:59 -05:00
Tony Krowiak
8c4fa92d01 util/qemu-config: fix missing machine command line options
Commit 0a7cf217 ("util/qemu-config: fix regression of
qmp_query_command_line_options") aimed to restore parsing of global
machine options, but missed two: "aes-key-wrap" and
"dea-key-wrap" (which were present in the initial version of that
patch). Let's add them to the machine_opts again.

Fixes: 0a7cf217 ("util/qemu-config: fix regression of
                  qmp_query_command_line_options")
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1444664181-28023-1-git-send-email-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

(cherry picked from commit 5bcfa0c543)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 11:27:15 -05:00
Christian Borntraeger
7c22dcdeb8 s390x/kvm: Fix vector validity bit in device machine checks
Device hotplugs trigger a crw machine check. All machine checks
have validity bits for certain register types. With vector support
we also have to claim that vector registers are valid.
This is a band-aid suitable for stable. Long term we should
create the full  mcic value dynamically depending on the active
features in the kernel interrupt handler.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit 2ab75df38e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 11:26:52 -05:00
Peter Crosthwaite
16514367ef misc: zynq_slcr: Fix MMIO writes
The /4 for offset calculation in MMIO writes was happening twice giving
wrong write offsets. Fix.

While touching the code, change the if-else to be a short returning if
and convert the debug message to a GUEST_ERROR, which is more accurate
for this condition.

Cc: qemu-stable@nongnu.org
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit c209b05372)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 11:17:10 -05:00
Markus Armbruster
55b4efb034 Revert "qdev: Use qdev_get_device_class() for -device <type>,help"
This reverts commit 31bed5509d.

The reverted commit changed qdev_device_help() to reject abstract
devices and devices that have cannot_instantiate_with_device_add_yet
set, to fix crash bugs like -device x86_64-cpu,help.

Rejecting abstract devices makes sense: they're purely internal, and
the implementation of the help feature can't cope with them.

Rejecting non-pluggable devices makes less sense: even though you
can't use them with -device, the help may still be useful elsewhere,
for instance with -global.  This is a regression: -device FOO,help
used to help even for FOO that aren't pluggable.

The previous two commits fixed the crash bug at a lower layer, so
reverting this one is now safe.  Fixes the -device FOO,help
regression, except for the broken devices marked
cannot_even_create_with_object_new_yet.  For those, the error message
is improved.

Example of a device where the regression is fixed:

    $ qemu-system-x86_64 -device PIIX4_PM,help
    PIIX4_PM.command_serr_enable=bool (on/off)
    PIIX4_PM.multifunction=bool (on/off)
    PIIX4_PM.rombar=uint32
    PIIX4_PM.romfile=str
    PIIX4_PM.addr=int32 (Slot and optional function number, example: 06.0 or 06)
    PIIX4_PM.memory-hotplug-support=bool
    PIIX4_PM.acpi-pci-hotplug-with-bridge-support=bool
    PIIX4_PM.s4_val=uint8
    PIIX4_PM.disable_s4=uint8
    PIIX4_PM.disable_s3=uint8
    PIIX4_PM.smb_io_base=uint32

Example of a device where it isn't fixed:

    $ qemu-system-x86_64 -device host-x86_64-cpu,help
    Can't list properties of device 'host-x86_64-cpu'

Both failed with "Parameter 'driver' expects pluggable device type"
before.

Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-11-git-send-email-armbru@redhat.com>
(cherry picked from commit 33fe968330)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 10:52:19 -05:00
Markus Armbruster
2874c6565e qdev: Protect device-list-properties against broken devices
Several devices don't survive object_unref(object_new(T)): they crash
or hang during cleanup, or they leave dangling pointers behind.

This breaks at least device-list-properties, because
qmp_device_list_properties() needs to create a device to find its
properties.  Broken in commit f4eb32b "qmp: show QOM properties in
device-list-properties", v2.1.  Example reproducer:

    $ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio
    {"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}}
    { "execute": "qmp_capabilities" }
    {"return": {}}
    { "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } }
    qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
    Aborted (core dumped)
    [Exit 134 (SIGABRT)]

Unfortunately, I can't fix the problems in these devices right now.
Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet
to mark them:

* Hang during cleanup (didn't debug, so I can't say why):
  "realview_pci", "versatile_pci".

* Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic",
  "fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such
  CPUs

* Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu",
  "host-powerpc64-cpu", "host-embedded-powerpc-cpu",
  "host-powerpc-cpu" (the powerpc ones can't currently reach the
  assertion, because the CPUs are only registered when KVM is enabled,
  but the assertion is arguably in the wrong place all the same)

Make qmp_device_list_properties() fail cleanly when the device is so
marked.  This improves device-list-properties from "crashes, hangs or
leaves dangling pointers behind" to "fails".  Not a complete fix, just
a better-than-nothing work-around.  In the above reproducer,
device-list-properties now fails with "Can't list properties of device
'pxa2xx-pcmcia'".

This also protects -device FOO,help, which uses the same machinery
since commit ef52358 "qdev-monitor: include QOM properties in -device
FOO, help output", v2.2.  Example reproducer:

    $ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help

Before:

    qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.

After:

    Can't list properties of device 'pxa2xx-pcmcia'

Cc: "Andreas Färber" <afaerber@suse.de>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Green <green@moxielogic.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Jia Liu <proljc@gmail.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
(cherry picked from commit 4c315c2766)

Conflicts:
	hw/arm/fsl-imx25.c
	hw/arm/fsl-imx31.c
	target-tilegx/cpu.c
	tests/device-introspect-test.c

* removed hunks pertaining to devices/tests not in 2.4

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 10:49:58 -05:00
Markus Armbruster
2d0583fc79 qmp: Fix device-list-properties not to crash for abstract device
Broken in commit f4eb32b "qmp: show QOM properties in
device-list-properties", v2.1.

Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-Id: <1443689999-12182-9-git-send-email-armbru@redhat.com>
(cherry picked from commit edb1523d90)

Conflicts:
	tests/device-introspect-test.c

* removed hunk specific to QAPI introspection (not in 2.4)

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 10:46:48 -05:00
Fam Zheng
40161bf27b vmxnet3: Drop net_vmxnet3_info.can_receive
Commit 6e99c63 ("net/socket: Drop net_socket_can_send") changed the
semantics around .can_receive for sockets to now require the device to
flush queued pkts when transitioning to a .can_receive=true state. But
it's OK to drop incoming packets when the link is not active.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 2734a20b81)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 10:42:31 -05:00
Jason Wang
2935ae915a virtio-net: unbreak self announcement and guest offloads after migration
After commit 019a3edbb2 ("virtio: make
features 64bit wide"). Device's guest_features was actually set after
vdc->load(). This breaks the assumption that device specific load()
function can check guest_features. For virtio-net, self announcement
and guest offloads won't work after migration.

Fixing this by defer them to virtio_net_load() where guest_features
were guaranteed to be set. Other virtio devices looks fine.

Fixes: 019a3edbb2
       ("virtio: make features 64bit wide")
Cc: qemu-stable@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>

(cherry picked from commit 1f8828ef57)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 10:36:28 -05:00
Cornelia Huck
2f3c310818 virtio: avoid leading underscores for helpers
Commit ef546f1275 ("virtio: add
feature checking helpers") introduced a helper __virtio_has_feature.
We don't want to use reserved identifiers, though, so let's
rename __virtio_has_feature to virtio_has_feature and virtio_has_feature
to virtio_vdev_has_feature.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit 95129d6fc9)
* prereq for 1f8828e
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-21 10:36:05 -05:00
Aurelien Jarno
1f21d3b8dc target-ppc: fix xscmpodp and xscmpudp decoding
The xscmpodp and xscmpudp instructions only have the AX, BX bits in
there encoding, the lowest bit (usually TX) is marked as an invalid
bit. We therefore can't decode them with GEN_XX2FORM, which decodes
the two lowest bit.

Introduce a new form GEN_XX2FORM, which decodes AX and BX and mark
the lowest bit as invalid.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 8f60f8e2e5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 23:04:01 -05:00
Aurelien Jarno
bac9ce97d3 target-ppc: fix vcipher, vcipherlast, vncipherlast and vpermxor
For vector instructions, the helpers get pointers to the vector register
in arguments. Some operands might point to the same register, including
the operand holding the result.

When emulating instructions which access the vector elements in a
non-linear way, we need to store the result in an temporary variable.

This fixes openssl when emulating a POWER8 CPU.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 65cf1f65be)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 23:03:39 -05:00
James Hogan
33fca8589c tcg/mips: Fix clobbering of qemu_ld inputs
The MIPS TCG backend implements qemu_ld with 64-bit targets using the v0
register (base) as a temporary to load the upper half of the QEMU TLB
comparator (see line 5 below), however this happens before the input
address is used (line 8 to mask off the low bits for the TLB
comparison, and line 12 to add the host-guest offset). If the input
address (addrl) also happens to have been placed in v0 (as in the second
column below), it gets clobbered before it is used.

     addrl in t2              addrl in v0

 1 srl     a0,t2,0x7        srl     a0,v0,0x7
 2 andi    a0,a0,0x1fe0     andi    a0,a0,0x1fe0
 3 addu    a0,a0,s0         addu    a0,a0,s0
 4 lw      at,9136(a0)      lw      at,9136(a0)      set TCG_TMP0 (at)
 5 lw      v0,9140(a0)      lw      v0,9140(a0)      set base (v0)
 6 li      t9,-4093         li      t9,-4093
 7 lw      a0,9160(a0)      lw      a0,9160(a0)      set addend (a0)
 8 and     t9,t9,t2         and     t9,t9,v0         use addrl
 9 bne     at,t9,0x836d8c8  bne     at,t9,0x836d838  use TCG_TMP0
10  nop                      nop
11 bne     v0,t8,0x836d8c8  bne     v0,a1,0x836d838  use base
12  addu   v0,a0,t2          addu   v0,a0,v0         use addrl, addend
13 lw      t0,0(v0)         lw      t0,0(v0)

Fix by using TCG_TMP0 (at) as the temporary instead of v0 (base),
pushing the load on line 5 forward into the delay slot of the low
comparison (line 10). The early load of the addend on line 7 also needs
pushing even further for 64-bit targets, or it will clobber a0 before
we're done with it. The output for 32-bit targets is unaffected.

 srl     a0,v0,0x7
 andi    a0,a0,0x1fe0
 addu    a0,a0,s0
 lw      at,9136(a0)
-lw      v0,9140(a0)      load high comparator
 li      t9,-4093
-lw      a0,9160(a0)      load addend
 and     t9,t9,v0
 bne     at,t9,0x836d838
- nop
+ lw     at,9140(a0)      load high comparator
+lw      a0,9160(a0)      load addend
-bne     v0,a1,0x836d838
+bne     at,a1,0x836d838
  addu   v0,a0,v0
 lw      t0,0(v0)

Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 5eb4f645eb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 23:00:05 -05:00
Markus Armbruster
a479b21c11 qom: Fix invalid error check in property_get_str()
When a function returns a null pointer on error and only on error, you
can do

    if (!foo(foos, errp)) {
        ... handle error ...
    }

instead of the more cumbersome

    Error *err = NULL;

    if (!foo(foos, &err)) {
        error_propagate(errp, err);
        ... handle error ...
    }

A StringProperty's getter, however, may return null on success!  We
then fail to call visit_type_str().

Screwed up in 6a146eb, v1.1.

Fails tests/qom-test in my current, heavily hacked QAPI branch.  No
reproducer for master known (but I didn't look hard).

Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit e1c8237df5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 22:57:42 -05:00
Markus Armbruster
d11ff15fd5 qom: Do not reuse errp after a possible error
The argument for an Error **errp parameter must point to a null
pointer.  If it doesn't, and an error happens, error_set() fails its
assertion.

Instead of

    foo(foos, errp);
    bar(bars, errp);

you need to do something like

    Error *err = NULL;

    foo(foos, &err);
    if (err) {
        error_propagate(errp, err);
        goto out;
    }

    bar(bars, errp);
out:

Screwed up in commit 0e55884 (v1.3.0): property_get_bool().

Screwed up in commit 1f21772 (v2.1.0): object_property_get_enum() and
object_property_get_uint16List().

Screwed up in commit a8e3fbe (v2.4.0): property_get_enum(),
property_set_enum().

Found by inspection, no actual crashes observed.

Fix them up.

Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Hu Tao <hutao@cn.fujitsu.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 4715d42efe)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 22:57:17 -05:00
John Snow
1b8e1f7ad9 ide: unify io_buffer_offset increments
IDEState's io_buffer_offset was originally added to keep track of offsets
in AHCI rather exclusively, but it was added to IDEState instead of an
AHCI-specific structure.

AHCI fakes all PIO transfers using DMA and a scatter-gather list. When
the core or atapi layers invoke HBA-specific mechanisms for transfers,
they do not always know that it is being backed by DMA or a sglist, so
this offset is not always updated by the HBA code everywhere.

If we modify it in dma_buf_commit, however, any HBA that needs to use
this offset to manage operating on only part of a sglist will have
access to it.

This will fix ATAPI PIO transfers performed through the AHCI HBA,
which were previously not modifying this value appropriately.

This will fix ATAPI PIO transfers larger than one sector.

Reported-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1440546331-29087-2-git-send-email-jsnow@redhat.com
CC: qemu-stable@nongnu.org
(cherry picked from commit aaeda4a3c9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 22:56:27 -05:00
Stefan Weil
e00bf9ee70 slirp: Fix non blocking connect for w32
Signed-off-by: Stefan Weil <sw@weilnetz.de>
(cherry picked from commit a246a01631)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 22:55:32 -05:00
Wen Congyang
78aeb6984c nbd: release exp->blk after all clients are closed
If the socket fd is shutdown, there may be some data which is received before
shutdown. We will read the data and do read/write in nbd_trip(). But the exp's
blk is NULL, and it will cause qemu crashed.

Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Message-Id: <55F929E2.1020501@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d626834849)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 22:55:05 -05:00
Michael Roth
6d62d0e3dd spapr_pci: fix device tree props for MSI/MSI-X
PAPR requires ibm,req#msi and ibm,req#msi-x to be present in the
device node to define the number of msi/msi-x interrupts the device
supports, respectively.

Currently we have ibm,req#msi-x hardcoded to a non-sensical constant
that happens to be 2, and are missing ibm,req#msi entirely. The result
of that is that msi-x capable devices get limited to 2 msi-x
interrupts (which can impact performance), and msi-only devices likely
wouldn't work at all. Additionally, if devices expect a minimum that
exceeds 2, the guest driver may fail to load entirely.

SLOF still owns the generation of these properties at boot-time
(although other device properties have since been offloaded to QEMU),
but for hotplugged devices we rely on the values generated by QEMU
and thus hit the limitations above.

Fix this by generating these properties in QEMU as expected by guests.

In the future it may make sense to modify SLOF to pass through these
values directly as we do with other props since we're duplicating SLOF
code.

Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit a8ad731a00)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 22:53:50 -05:00
Alberto Garcia
5644f6f924 gtk: use setlocale() for LC_MESSAGES only
The QEMU code is not internationalized and assumes that it runs under
the C locale, but if we use the GTK+ UI we'll end up importing the
locale settings from the environment. This can break things, such as
the JSON generator and iotest 120 in locales that use a decimal comma.

We do however have translations for a few simple strings for the GTK+
menu items, so in order to run QEMU using the C locale, and yet have a
translated UI let's use setlocale() for LC_MESSAGES only.

Cc: qemu-stable@nongnu.org
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 2cb5d2a47c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 22:51:42 -05:00
John Snow
63d761388d ide: fix ATAPI command permissions
We're a little too lenient with what we'll let an ATAPI drive handle.
Clamp down on the IDE command execution table to remove CD_OK permissions
from commands that are not and have never been ATAPI commands.

For ATAPI command validity, please see:
- ATA4 Section 6.5 ("PACKET Command feature set")
- ATA8/ACS Section 4.3 ("The PACKET feature set")
- ACS3 Section 4.3 ("The PACKET feature set")

ACS3 has a historical command validity table in Table B.4
("Historical Command Assignments") that can be referenced to find when
a command was introduced, deprecated, obsoleted, etc.

The only reference for ATAPI command validity is by checking that
version's PACKET feature set section.

ATAPI was introduced by T13 into ATA4, all commands retired prior to ATA4
therefore are assumed to have never been ATAPI commands.

Mandatory commands, as listed in ATA8-ACS3, are:

- DEVICE RESET
- EXECUTE DEVICE DIAGNOSTIC
- IDENTIFY DEVICE
- IDENTIFY PACKET DEVICE
- NOP
- PACKET
- READ SECTOR(S)
- SET FEATURES

Optional commands as listed in ATA8-ACS3, are:

- FLUSH CACHE
- READ LOG DMA EXT
- READ LOG EXT
- WRITE LOG DMA EXT
- WRITE LOG EXT

All other commands are illegal to send to an ATAPI device and should
be rejected by the device.

CD_OK removal justifications:

0x06 WIN_DSM              Defined in ACS2. Not valid for ATAPI.
0x21 WIN_READ_ONCE        Retired in ATA5. Not ATAPI in ATA4.
0x94 WIN_STANDBYNOW2      Retired in ATA4. Did not coexist with ATAPI.
0x95 WIN_IDLEIMMEDIATE2   Retired in ATA4. Did not coexist with ATAPI.
0x96 WIN_STANDBY2         Retired in ATA4. Did not coexist with ATAPI.
0x97 WIN_SETIDLE2         Retired in ATA4. Did not coexist with ATAPI.
0x98 WIN_CHECKPOWERMODE2  Retired in ATA4. Did not coexist with ATAPI.
0x99 WIN_SLEEPNOW2        Retired in ATA4. Did not coexist with ATAPI.
0xE0 WIN_STANDBYNOW1      Not part of ATAPI in ATA4, ACS or ACS3.
0xE1 WIN_IDLEIMMDIATE     Not part of ATAPI in ATA4, ACS or ACS3.
0xE2 WIN_STANDBY          Not part of ATAPI in ATA4, ACS or ACS3.
0xE3 WIN_SETIDLE1         Not part of ATAPI in ATA4, ACS or ACS3.
0xE4 WIN_CHECKPOWERMODE1  Not part of ATAPI in ATA4, ACS or ACS3.
0xE5 WIN_SLEEPNOW1        Not part of ATAPI in ATA4, ACS or ACS3.
0xF8 WIN_READ_NATIVE_MAX  Obsoleted in ACS3. Not ATAPI in ATA4 or ACS.

This patch fixes a divide by zero fault that can be caused by sending
the WIN_READ_NATIVE_MAX command to an ATAPI drive, which causes it to
attempt to use zeroed CHS values to perform sector arithmetic.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1441816082-21031-1-git-send-email-jsnow@redhat.com
CC: qemu-stable@nongnu.org
(cherry picked from commit d9033e1d3a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 22:47:36 -05:00
Max Reitz
c13b1c8314 qcow2: Make size_to_clusters() return uint64_t
Sadly, some images may have more clusters than what can be represented
using a plain int. We should be prepared for that case (in
qcow2_check_refcounts() we actually were trying to catch that case, but
since size_to_clusters() truncated the returned value, that check never
did anything useful).

Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b6d36def6d)

Conflicts:
	block/qcow2-cluster.c
	block/qcow2.h

* removed context dependency on ff99129a
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 20:18:17 -05:00
Richard Henderson
052677b2c8 target-arm: Share all common TCG temporaries
This is a bug fix for aarch64.  At present, we have branches using
the 32-bit (translate.c) versions of cpu_[NZCV]F, but we set the flags
using the 64-bit (translate-a64.c) versions of cpu_[NZCV]F.  From
the view of the TCG code generator, these are unrelated variables.

The bug is hard to see because we currently only read these variables
from branches, and upon reaching a branch TCG will first spill live
variables and then reload the arguments of the branch.  Since the
32-bit versions were never live until reaching the branch, we'd re-read
the data that had just been spilled from the 64-bit versions.

There is currently no such problem with the cpu_exclusive_* variables,
but there's no point in tempting fate.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-2-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 78bcaa3e37)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 20:12:11 -05:00
Pierre Morel
0fdf9f756f virtio dataplane: adapt dataplane for virtio Version 1
Let dataplane allocate different region for the desc/avail/used
ring regions.
Take VIRTIO_RING_F_EVENT_IDX into account to increase the used/avail
rings accordingly.

[Fix 32-bit builds by changing 16lx format specifier to HWADDR_PRIx.
--Stefan]

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Message-id: 1441625636-23773-1-git-send-email-pmorel@linux.vnet.ibm.com
(changed __virtio16 into uint16_t,
 map descriptor table and available ring read-only)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

(cherry picked from commit a9718ef000)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 20:08:04 -05:00
Aníbal Limón
d077545dfe cpus.c: qemu_mutex_lock_iothread fix race condition at cpu thread init
When QEMU starts the RCU thread executes qemu_mutex_lock_thread
causing error "qemu:qemu_cpu_kick_thread: No such process" and exits.

This isn't occur frequently but in glibc the thread id can exist and
this not guarantee that the thread is on active/running state. If is
inserted a sleep(1) after newthread assignment [1] the issue appears.

So not make assumption that thread exist if first_cpu->thread is set
then change the validation of cpu to created that is set into cpu
threads (kvm, tcg, dummy).

[1] https://sourceware.org/git/?p=glibc.git;a=blob;f=nptl/pthread_create.c;h=d10f4ea8004e1d8f3a268b95cc0f8d93b8d89867;hb=HEAD#l621

Cc: qemu-stable@nongnu.org
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Message-Id: <1441313313-3040-1-git-send-email-anibal.limon@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 46036b2462)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 20:00:17 -05:00
Vladislav Yasevich
f6737604da rtl8139: Do not consume the packet during overflow in standard mode.
When operation in standard mode, we currently return the size
of packet during buffer overflow.  This consumes the overflow
packet.  Return 0 instead so we can re-process the overflow packet
when we have room.

This fixes issues with lost/dropped fragments of large messages.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1441121206-6997-3-git-send-email-vyasevic@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 26c4e7ca72)
*removed dependency on b76f21a7
*removed context dependency on 4cbea598
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 19:57:30 -05:00
Vladislav Yasevich
d2b0f96fe2 rtl8139: Fix receive buffer overflow check
rtl8139_do_receive() tries to check for the overflow condition
by making sure that packet_size + 8 does not exceed the
available buffer space.  The issue here is that RxBuffAddr,
used to calculate available buffer space, is aligned to a
a 4 byte boundry after every update.  So it is possible that
every packet ends up being slightly padded when written
to the receive buffer.  This padding is not taken into
account when checking for overflow and we may end up missing
the overflow condition can causing buffer overwrite.

This patch takes alignment into consideration when
checking for overflow condition.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1441121206-6997-2-git-send-email-vyasevic@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit fabdcd3392)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-20 13:30:05 -05:00
Cornelia Huck
a00431853f s390x/css: start with cleared cstat/dstat
When executing the start function, we should start with a clear state
regarding subchannel and device status; it is easy to forget updating one
of them after the ccw has been processed.

Note that we don't need to care about resetting the various control
fields: They are cleared by tsch(), and if they were still pending,
we wouldn't be able to execute the start function in the first
place.

Also note that we don't want to clear cstat/dstat if a suspended
subchannel is resumed.

This fixes a bug where we would continue to present channel-program
check in cstat even though later ccw requests for the subchannel
finished without error (i.e. cstat should be 0).

Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
(cherry picked from commit 6b7741c2be)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 23:20:42 -05:00
Alexander Graf
b51715e1c0 PPC: E500: Update u-boot to commit 79c884d7e4
The current U-Boot binary in QEMU has a bug where it fails to support
dynamic CCSR addressing. Without this support, u-boot can not boot the
ppce500 machine anymore. This has been fixed upstream in u-boot commit
e834975b.

Update the u-boot blob we carry in QEMU to the latest u-boot upstream,
so that we can successfully run u-boot with the ppce500 machine again.

CC: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit d4574435a6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 23:20:08 -05:00
Michael S. Tsirkin
267bc47438 scripts/dump-guest-memory.py: fix after RAMBlock change
commit 9b8424d573
    "exec: split length -> used_length/max_length"
changed field names in struct RAMBlock

It turns out that scripts/dump-guest-memory.py was
poking at this field, update it accordingly.

Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1440666378-3152-1-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 0c71d41e2a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 23:17:43 -05:00
Gonglei
955ff148de vhost-scsi: fix wrong vhost-scsi firmware path
vhost-scsi bootindex does't work because Qemu passes
wrong fireware path to seabios.

before:
  /pci@i0cf8/scsi@7channel@0/vhost-scsi@0,0
after applying the patch:
  /pci@i0cf8/scsi@7/channel@0/vhost-scsi@0,0

Reported-by: Subo <subo7@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1440553971-11108-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit f42bf6a262)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 23:15:39 -05:00
Mark Cave-Ayland
71b685832d mac_dbdma: always clear FLUSH bit once DBDMA channel flush is complete
The code to flush the DBDMA channel was effectively duplicated in
dbdma_control_write(), except for the fact that the copy executed outside of a
RUN bit transition was broken by not clearing the FLUSH bit once the flush was
complete.

Newer PPC Linux kernels would timeout waiting for the FLUSH bit to clear again
after submitting a FLUSH command. Fix this by always clearing the FLUSH bit
once the channel flush is complete and removing the repeated code.

Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 1cde732d88)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 18:19:14 -05:00
Max Reitz
9a20ccaecd qemu-img: Fix crash in amend invocation
Example:
$ ./qemu-img create -f qcow2 /tmp/t.qcow2 64M
$ ./qemu-img amend -f qcow2 -o backing_file=/tmp/t.qcow2, -o help \
    /tmp/t.qcow2

This should not crash. This actually is tested by iotest 082, but not
caught due to the segmentation fault being silent (which is something
that needs to be fixed, too).

Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit e814dffcc9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 18:18:12 -05:00
Peter Lieven
d9af73191c block/nfs: fix calculation of allocated file size
st.st_blocks is always counted in 512 byte units. Do not
use st.st_blksize as multiplicator which may be larger.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1440067607-14547-1-git-send-email-pl@kamp.de
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit 055c6f912c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 18:17:25 -05:00
Peter Crosthwaite
637dd0bb7c exec-all: Translate TCI return addresses backwards too
This subtraction of return addresses applies directly to TCI as well as
host-TCG. This fixes Linux boots for at least Microblaze, CRIS, ARM and
SH4 when using TCI.

[sw: Removed indentation for preprocessor statement]
[sw: The patch also fixes Linux boot for x86_64]

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
(cherry picked from commit a17d448274)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 18:15:48 -05:00
Peter Lieven
2ac9fa162e block/iscsi: validate block size returned from target
It has been reported that at least tgtd returns a block size of 0
for LUN 0. To avoid running into divide by zero later on and protect
against other problematic block sizes validate the block size right
at connection time.

Cc: qemu-stable@nongnu.org
Reported-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1439552016-8557-1-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 6d1f252d8c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 18:14:37 -05:00
Peter Maydell
5b7d840e74 target-arm/arm-semi.c: Fix broken SYS_WRITE0 via gdb
A spurious trailing "\n" in the gdb syscall format string used
for SYS_WRITE0 meant that gdb would reject the remote syscall,
with the effect that the output from the guest was silently dropped.
Remove the newline so that gdb accepts the packet.

Cc: qemu-stable@nongnu.org

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 857b55adb7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 18:13:53 -05:00
Kevin Wolf
0de7d2b793 mirror: Fix coroutine reentrance
This fixes a regression introduced by commit dcfb3beb ("mirror: Do zero
write on target if sectors not allocated"), which was reported to cause
aborts with the message "Co-routine re-entered recursively".

The cause for this bug is the following code in mirror_iteration_done():

    if (s->common.busy) {
        qemu_coroutine_enter(s->common.co, NULL);
    }

This has always been ugly because - unlike most places that reenter - it
doesn't have a specific yield that it pairs with, but is more
uncontrolled.  What we really mean here is "reenter the coroutine if
it's in one of the four explicit yields in mirror.c".

This used to be equivalent with s->common.busy because neither
mirror_run() nor mirror_iteration() call any function that could yield.
However since commit dcfb3beb this doesn't hold true any more:
bdrv_get_block_status_above() can yield.

So what happens is that bdrv_get_block_status_above() wants to take a
lock that is already held, so it adds itself to the queue of waiting
coroutines and yields. Instead of being woken up by the unlock function,
however, it gets woken up by mirror_iteration_done(), which is obviously
wrong.

In most cases the code actually happens to cope fairly well with such
cases, but in this specific case, the unlock must already have scheduled
the coroutine for wakeup when mirror_iteration_done() reentered it. And
then the coroutine happened to process the scheduled restarts and tried
to reenter itself recursively.

This patch fixes the problem by pairing the reenter in
mirror_iteration_done() with specific yields instead of abusing
s->common.busy.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1439455310-11263-1-git-send-email-kwolf@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit e424aff5f3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 18:13:21 -05:00
Fam Zheng
f399ea092e scsi-disk: Fix assertion failure on WRITE SAME
The last portion of an unaligned WRITE SAME command could fail the
assertion in bdrv_aligned_pwritev:

    assert(!qiov || bytes == qiov->size);

Because we updated data->iov.iov_len right above this if block, but
data->qiov still has the old size.

Reinitialize the qiov to make them equal and keep block layer happy.

Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1438159512-3871-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a56537a127)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-17 18:03:09 -05:00
Michael Roth
83c92b4514 Update version for 2.4.0.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-22 16:53:29 -05:00
P J P
5a1ccdfe44 net: avoid infinite loop when receiving packets(CVE-2015-5278)
Ne2000 NIC uses ring buffer of NE2000_MEM_SIZE(49152)
bytes to process network packets. While receiving packets
via ne2000_receive() routine, a local 'index' variable
could exceed the ring buffer size, leading to an infinite
loop situation.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: P J P <pjp@fedoraproject.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 737d2b3c41)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-21 17:04:22 -05:00
P J P
7aa2bcad0c net: add checks to validate ring buffer pointers(CVE-2015-5279)
Ne2000 NIC uses ring buffer of NE2000_MEM_SIZE(49152)
bytes to process network packets. While receiving packets
via ne2000_receive() routine, a local 'index' variable
could exceed the ring buffer size, which could lead to a
memory buffer overflow. Added other checks at initialisation.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: P J P <pjp@fedoraproject.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 9bbdbc66e5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-21 17:04:14 -05:00
P J P
3a56af1fbc e1000: Avoid infinite loop in processing transmit descriptor (CVE-2015-6815)
While processing transmit descriptors, it could lead to an infinite
loop if 'bytes' was to become zero; Add a check to avoid it.

[The guest can force 'bytes' to 0 by setting the hdr_len and mss
descriptor fields to 0.
--Stefan]

Signed-off-by: P J P <pjp@fedoraproject.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1441383666-6590-1-git-send-email-stefanha@redhat.com
(cherry picked from commit b947ac2bf2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-21 17:04:05 -05:00
Gerd Hoffmann
efec4dcd25 vnc: fix memory corruption (CVE-2015-5225)
The _cmp_bytes variable added by commit "bea60dd ui/vnc: fix potential
memory corruption issues" can become negative.  Result is (possibly
exploitable) memory corruption.  Reason for that is it uses the stride
instead of bytes per scanline to apply limits.

For the server surface is is actually fine.  vnc creates that itself,
there is never any padding and thus scanline length always equals stride.

For the guest surface scanline length and stride are typically identical
too, but it doesn't has to be that way.  So add and use a new variable
(guest_ll) for the guest scanline length.  Also rename min_stride to
line_bytes to make more clear what it actually is.  Finally sprinkle
in an assert() to make sure we never use a negative _cmp_bytes again.

Reported-by: 范祚至(库特) <zuozhi.fzz@alibaba-inc.com>
Reviewed-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit eb8934b041)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-21 17:03:16 -05:00
6506 changed files with 511566 additions and 1291890 deletions

View File

@@ -1,16 +0,0 @@
freebsd_12_task:
freebsd_instance:
image: freebsd-12-0-release-amd64
cpu: 8
memory: 8G
env:
CIRRUS_CLONE_DEPTH: 1
install_script: pkg install -y
bison curl cyrus-sasl git glib gmake gnutls
nettle perl5 pixman pkgconf png usbredir
script:
- mkdir build
- cd build
- ../configure || { cat config.log; exit 1; }
- gmake -j8
- gmake -j8 V=1 check

View File

@@ -1,2 +0,0 @@
((c-mode . ((c-file-style . "stroustrup")
(indent-tabs-mode . nil))))

View File

@@ -1,34 +0,0 @@
# EditorConfig is a file format and collection of text editor plugins
# for maintaining consistent coding styles between different editors
# and IDEs. Most popular editors support this either natively or via
# plugin.
#
# Check https://editorconfig.org for details.
root = true
[*]
end_of_line = lf
insert_final_newline = true
charset = utf-8
[*.mak]
indent_style = tab
indent_size = 8
file_type_emacs = makefile
[Makefile*]
indent_style = tab
indent_size = 8
file_type_emacs = makefile
[*.{c,h}]
indent_style = space
indent_size = 4
[*.{vert,frag}]
file_type_emacs = glsl
[*.json]
indent_style = space
file_type_emacs = python

View File

@@ -1,8 +0,0 @@
# GDB may have ./.gdbinit loading disabled by default. In that case you can
# follow the instructions it prints. They boil down to adding the following to
# your home directory's ~/.gdbinit file:
#
# add-auto-load-safe-path /path/to/qemu/.gdbinit
# Load QEMU-specific sub-commands and settings
source scripts/qemu-gdb.py

93
.gitignore vendored
View File

@@ -5,46 +5,40 @@
/config-target.*
/config.status
/config-temp
/trace-events-all
/trace/generated-tracers.h
/trace/generated-tracers.c
/trace/generated-tracers-dtrace.h
/trace/generated-tracers.dtrace
/trace/generated-events.h
/trace/generated-events.c
/trace/generated-helpers-wrappers.h
/trace/generated-helpers.h
/trace/generated-helpers.c
/trace/generated-tcg-tracers.h
/trace/generated-ust-provider.h
/trace/generated-ust.c
/ui/shader/texture-blit-frag.h
/ui/shader/texture-blit-vert.h
/ui/shader/texture-blit-flip-vert.h
/ui/input-keymap-*.c
/libcacard/trace/generated-tracers.c
*-timestamp
/*-softmmu
/*-darwin-user
/*-linux-user
/*-bsd-user
/ivshmem-client
/ivshmem-server
/libdis*
/libuser
/linux-headers/asm
/qga/qapi-generated
/qapi-gen-timestamp
/qapi/qapi-builtin-types.[ch]
/qapi/qapi-builtin-visit.[ch]
/qapi/qapi-commands-*.[ch]
/qapi/qapi-commands.[ch]
/qapi/qapi-emit-events.[ch]
/qapi/qapi-events-*.[ch]
/qapi/qapi-events.[ch]
/qapi/qapi-introspect.[ch]
/qapi/qapi-types-*.[ch]
/qapi/qapi-types.[ch]
/qapi/qapi-visit-*.[ch]
/qapi/qapi-visit.[ch]
/qapi/qapi-doc.texi
/qapi-generated
/qapi-types.[ch]
/qapi-visit.[ch]
/qapi-event.[ch]
/qmp-commands.h
/qmp-marshal.c
/qemu-doc.html
/qemu-tech.html
/qemu-doc.info
/qemu-doc.txt
/qemu-edid
/qemu-tech.info
/qemu-img
/qemu-nbd
/qemu-options.def
@@ -54,23 +48,16 @@
/qemu-io
/qemu-ga
/qemu-bridge-helper
/qemu-keymap
/qemu-monitor.texi
/qemu-monitor-info.texi
/qemu-version.h
/qemu-version.h.tmp
/module_block.h
/scsi/qemu-pr-helper
/vhost-user-scsi
/vhost-user-blk
/qmp-commands.txt
/vscclient
/fsdev/virtfs-proxy-helper
*.tmp
*.[1-9]
*.a
*.aux
*.cp
*.dvi
*.exe
*.msi
*.dll
*.so
*.mo
@@ -90,24 +77,19 @@
*.d
!/scripts/qemu-guest-agent/fsfreeze-hook.d
*.o
*.lo
*.la
*.pc
.libs
.sdk
*.gcda
*.gcno
*.gcov
/pc-bios/bios-pq/status
/pc-bios/vgabios-pq/status
/pc-bios/optionrom/linuxboot.asm
/pc-bios/optionrom/linuxboot.bin
/pc-bios/optionrom/linuxboot.raw
/pc-bios/optionrom/linuxboot.img
/pc-bios/optionrom/linuxboot_dma.asm
/pc-bios/optionrom/linuxboot_dma.bin
/pc-bios/optionrom/linuxboot_dma.raw
/pc-bios/optionrom/linuxboot_dma.img
/pc-bios/optionrom/pvh.asm
/pc-bios/optionrom/pvh.bin
/pc-bios/optionrom/pvh.raw
/pc-bios/optionrom/pvh.img
/pc-bios/optionrom/multiboot.asm
/pc-bios/optionrom/multiboot.bin
/pc-bios/optionrom/multiboot.raw
@@ -118,39 +100,8 @@
/pc-bios/optionrom/kvmvapic.img
/pc-bios/s390-ccw/s390-ccw.elf
/pc-bios/s390-ccw/s390-ccw.img
/docs/interop/qemu-ga-qapi.texi
/docs/interop/qemu-ga-ref.html
/docs/interop/qemu-ga-ref.info*
/docs/interop/qemu-ga-ref.txt
/docs/interop/qemu-qmp-qapi.texi
/docs/interop/qemu-qmp-ref.html
/docs/interop/qemu-qmp-ref.info*
/docs/interop/qemu-qmp-ref.txt
/docs/version.texi
*.tps
.stgit-*
.git-submodule-status
cscope.*
tags
TAGS
docker-src.*
*~
*.ast_raw
*.depend_raw
trace.h
trace.c
trace-ust.h
trace-ust.h
trace-dtrace.h
trace-dtrace.dtrace
trace-root.h
trace-root.c
trace-ust-root.h
trace-ust-root.h
trace-ust-all.h
trace-ust-all.c
trace-dtrace-root.h
trace-dtrace-root.dtrace
trace-ust-all.h
trace-ust-all.c
/target/arm/decode-sve.inc.c

View File

@@ -1,73 +0,0 @@
before_script:
- apt-get update -qq
- apt-get install -y -qq flex bison libglib2.0-dev libpixman-1-dev genisoimage
build-system1:
script:
- apt-get install -y -qq libgtk-3-dev libvte-dev nettle-dev libcacard-dev
libusb-dev libvde-dev libspice-protocol-dev libgl1-mesa-dev
- ./configure --enable-werror --target-list="aarch64-softmmu alpha-softmmu
cris-softmmu hppa-softmmu lm32-softmmu moxie-softmmu microblazeel-softmmu
mips64el-softmmu m68k-softmmu ppc-softmmu riscv64-softmmu sparc-softmmu"
- make -j2
- make -j2 check
build-system2:
script:
- apt-get install -y -qq libsdl2-dev libgcrypt-dev libbrlapi-dev libaio-dev
libfdt-dev liblzo2-dev librdmacm-dev libibverbs-dev libibumad-dev
- ./configure --enable-werror --target-list="tricore-softmmu unicore32-softmmu
microblaze-softmmu mips-softmmu riscv32-softmmu s390x-softmmu sh4-softmmu
sparc64-softmmu x86_64-softmmu xtensa-softmmu nios2-softmmu or1k-softmmu"
- make -j2
- make -j2 check
build-disabled:
script:
- ./configure --enable-werror --disable-rdma --disable-slirp --disable-curl
--disable-capstone --disable-live-block-migration --disable-glusterfs
--disable-replication --disable-coroutine-pool --disable-smartcard
--disable-guest-agent --disable-curses --disable-libxml2 --disable-tpm
--disable-qom-cast-debug --disable-spice --disable-vhost-vsock
--disable-vhost-net --disable-vhost-crypto --disable-vhost-user
--target-list="i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user"
- make -j2
- make -j2 check-qtest SPEED=slow
build-tcg-disabled:
script:
- apt-get install -y -qq clang libgtk-3-dev libbluetooth-dev libusb-dev
- ./configure --cc=clang --enable-werror --disable-tcg --audio-drv-list=""
- make -j2
- make check-unit
- make check-qapi-schema
- cd tests/qemu-iotests/
- ./check -raw 001 002 003 004 005 008 009 010 011 012 021 025 032 033 048
052 063 077 086 101 104 106 113 147 148 150 151 152 157 159 160
163 170 171 183 184 192 194 197 205 208 215 221 222 226 227 236
- ./check -qcow2 001 002 003 004 005 007 008 009 010 011 012 013 017 018 019
020 021 022 024 025 027 028 029 031 032 033 034 035 036 037 038
039 040 042 043 046 047 048 049 050 051 052 053 054 056 057 058
060 061 062 063 065 066 067 068 069 071 072 073 074 079 080 082
085 086 089 090 091 095 096 097 098 099 102 103 104 105 107 108
110 111 114 117 120 122 124 126 127 129 130 132 133 134 137 138
139 140 141 142 143 144 145 147 150 151 152 154 155 156 157 158
161 165 170 172 174 176 177 179 184 186 187 190 192 194 195 196
197 200 202 203 205 208 209 214 215 216 217 218 222 226 227 229 234
build-user:
script:
- ./configure --enable-werror --disable-system --disable-guest-agent
--disable-capstone --disable-slirp --disable-fdt
- make -j2
- make run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
build-clang:
script:
- apt-get install -y -qq clang libsdl2-dev
xfslibs-dev libiscsi-dev libnfs-dev libseccomp-dev gnutls-dev librbd-dev
- ./configure --cc=clang --cxx=clang++ --enable-werror
--target-list="alpha-softmmu arm-softmmu m68k-softmmu mips64-softmmu
ppc-softmmu s390x-softmmu x86_64-softmmu arm-linux-user"
- make -j2
- make -j2 check

48
.gitmodules vendored
View File

@@ -1,51 +1,33 @@
[submodule "roms/vgabios"]
path = roms/vgabios
url = git://git.qemu-project.org/vgabios.git/
[submodule "roms/seabios"]
path = roms/seabios
url = https://git.qemu.org/git/seabios.git/
url = git://git.qemu-project.org/seabios.git/
[submodule "roms/SLOF"]
path = roms/SLOF
url = https://git.qemu.org/git/SLOF.git
url = git://git.qemu-project.org/SLOF.git
[submodule "roms/ipxe"]
path = roms/ipxe
url = https://git.qemu.org/git/ipxe.git
url = git://git.qemu-project.org/ipxe.git
[submodule "roms/openbios"]
path = roms/openbios
url = https://git.qemu.org/git/openbios.git
url = git://git.qemu-project.org/openbios.git
[submodule "roms/openhackware"]
path = roms/openhackware
url = https://git.qemu.org/git/openhackware.git
url = git://git.qemu-project.org/openhackware.git
[submodule "roms/qemu-palcode"]
path = roms/qemu-palcode
url = https://git.qemu.org/git/qemu-palcode.git
url = git://github.com/rth7680/qemu-palcode.git
[submodule "roms/sgabios"]
path = roms/sgabios
url = https://git.qemu.org/git/sgabios.git
url = git://git.qemu-project.org/sgabios.git
[submodule "pixman"]
path = pixman
url = git://anongit.freedesktop.org/pixman
[submodule "dtc"]
path = dtc
url = https://git.qemu.org/git/dtc.git
url = git://git.qemu-project.org/dtc.git
[submodule "roms/u-boot"]
path = roms/u-boot
url = https://git.qemu.org/git/u-boot.git
[submodule "roms/skiboot"]
path = roms/skiboot
url = https://git.qemu.org/git/skiboot.git
[submodule "roms/QemuMacDrivers"]
path = roms/QemuMacDrivers
url = https://git.qemu.org/git/QemuMacDrivers.git
[submodule "ui/keycodemapdb"]
path = ui/keycodemapdb
url = https://git.qemu.org/git/keycodemapdb.git
[submodule "capstone"]
path = capstone
url = https://git.qemu.org/git/capstone.git
[submodule "roms/seabios-hppa"]
path = roms/seabios-hppa
url = https://github.com/hdeller/seabios-hppa.git
[submodule "roms/u-boot-sam460ex"]
path = roms/u-boot-sam460ex
url = https://git.qemu.org/git/u-boot-sam460ex.git
[submodule "tests/fp/berkeley-testfloat-3"]
path = tests/fp/berkeley-testfloat-3
url = https://github.com/cota/berkeley-testfloat-3
[submodule "tests/fp/berkeley-softfloat-3"]
path = tests/fp/berkeley-softfloat-3
url = https://github.com/cota/berkeley-softfloat-3
url = git://git.qemu-project.org/u-boot.git

View File

@@ -1,51 +0,0 @@
#
# Common git-publish profiles that can be used to send patches to QEMU upstream.
#
# See https://github.com/stefanha/git-publish for more information
#
[gitpublishprofile "default"]
base = master
to = qemu-devel@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "rfc"]
base = master
prefix = RFC PATCH
to = qemu-devel@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "stable"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-stable@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "trivial"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-trivial@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "block"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-block@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "arm"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-arm@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "s390"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-s390@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null
[gitpublishprofile "ppc"]
base = master
to = qemu-devel@nongnu.org
cc = qemu-ppc@nongnu.org
cccmd = scripts/get_maintainer.pl --noroles --norolestats --nogit --nogit-fallback 2>/dev/null

View File

@@ -1,7 +1,6 @@
# This mailmap fixes up author names/addresses.
# The first section translates weird addresses from the original git import
# into proper addresses so that they are counted properly by git shortlog.
# This mailmap just translates the weird addresses from the original import into git
# into proper addresses so that they are counted properly in git shortlog output.
#
Andrzej Zaborowski <balrogg@gmail.com> balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
Anthony Liguori <anthony@codemonkey.ws> aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162>
Anthony Liguori <anthony@codemonkey.ws> Anthony Liguori <aliguori@us.ibm.com>
@@ -9,31 +8,10 @@ Aurelien Jarno <aurelien@aurel32.net> aurel32 <aurel32@c046a42c-6fe2-441c-8c8c-7
Blue Swirl <blauwirbel@gmail.com> blueswir1 <blueswir1@c046a42c-6fe2-441c-8c8c-71466251a162>
Edgar E. Iglesias <edgar.iglesias@gmail.com> edgar_igl <edgar_igl@c046a42c-6fe2-441c-8c8c-71466251a162>
Fabrice Bellard <fabrice@bellard.org> bellard <bellard@c046a42c-6fe2-441c-8c8c-71466251a162>
James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
Jocelyn Mayer <l_indien@magic.fr> j_mayer <j_mayer@c046a42c-6fe2-441c-8c8c-71466251a162>
Paul Brook <paul@codesourcery.com> pbrook <pbrook@c046a42c-6fe2-441c-8c8c-71466251a162>
Yongbok Kim <yongbok.kim@mips.com> <yongbok.kim@imgtec.com>
Aleksandar Markovic <amarkovic@wavecomp.com> <aleksandar.markovic@mips.com>
Aleksandar Markovic <amarkovic@wavecomp.com> <aleksandar.markovic@imgtec.com>
Paul Burton <pburton@wavecomp.com> <paul.burton@mips.com>
Paul Burton <pburton@wavecomp.com> <paul.burton@imgtec.com>
Paul Burton <pburton@wavecomp.com> <paul@archlinuxmips.org>
Thiemo Seufer <ths@networkno.de> ths <ths@c046a42c-6fe2-441c-8c8c-71466251a162>
malc <av1474@comtv.ru> malc <malc@c046a42c-6fe2-441c-8c8c-71466251a162>
# There is also a:
# (no author) <(no author)@c046a42c-6fe2-441c-8c8c-71466251a162>
# for the cvs2svn initialization commit e63c3dc74bf.
# Next, translate a few commits where mailman rewrote the From: line due
# to strict SPF, although we prefer to avoid adding more entries like that.
Ed Swierk <eswierk@skyportsystems.com> Ed Swierk via Qemu-devel <qemu-devel@nongnu.org>
Ian McKellar <ianloic@google.com> Ian McKellar via Qemu-devel <qemu-devel@nongnu.org>
Julia Suvorova <jusual@mail.ru> Julia Suvorova via Qemu-devel <qemu-devel@nongnu.org>
Justin Terry (VM) <juterry@microsoft.com> Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
# Also list preferred name forms where people have changed their
# git author config, or had utf8/latin1 encoding issues.
Daniel P. Berrangé <berrange@redhat.com>
Reimar Döffinger <Reimar.Doeffinger@gmx.de>

View File

@@ -1,40 +0,0 @@
language: c
git:
submodules: false
env:
global:
- LC_ALL=C
matrix:
- IMAGE=debian-amd64
TARGET_LIST=x86_64-softmmu,x86_64-linux-user
# currently disabled as the mxe.cc repos are down
# - IMAGE=debian-win32-cross
# TARGET_LIST=arm-softmmu,i386-softmmu,lm32-softmmu
# - IMAGE=debian-win64-cross
# TARGET_LIST=aarch64-softmmu,sparc64-softmmu,x86_64-softmmu
- IMAGE=debian-armel-cross
TARGET_LIST=arm-softmmu,arm-linux-user,armeb-linux-user
- IMAGE=debian-armhf-cross
TARGET_LIST=arm-softmmu,arm-linux-user,armeb-linux-user
- IMAGE=debian-arm64-cross
TARGET_LIST=aarch64-softmmu,aarch64-linux-user
- IMAGE=debian-s390x-cross
TARGET_LIST=s390x-softmmu,s390x-linux-user
- IMAGE=debian-mips-cross
TARGET_LIST=mips-softmmu,mipsel-linux-user
- IMAGE=debian-mips64el-cross
TARGET_LIST=mips64el-softmmu,mips64el-linux-user
- IMAGE=debian-ppc64el-cross
TARGET_LIST=ppc64-softmmu,ppc64-linux-user,ppc64abi32-linux-user
build:
pre_ci:
- make docker-image-${IMAGE} V=1
pre_ci_boot:
image_name: qemu
image_tag: ${IMAGE}
pull: false
options: "-e HOME=/root"
ci:
- unset CC
- ./configure ${QEMU_CONFIGURE_OPTS} --target-list=${TARGET_LIST}
- make -j$(($(getconf _NPROCESSORS_ONLN) + 1))

View File

@@ -1,254 +1,103 @@
# The current Travis default is a VM based 16.04 Xenial on GCE
# Additional builds with specific requirements for a full VM need to
# be added as additional matrix: entries later on
dist: xenial
language: c
python:
- "2.4"
compiler:
- gcc
cache: ccache
addons:
apt:
packages:
# Build dependencies
- libaio-dev
- libattr1-dev
- libbrlapi-dev
- libcap-ng-dev
- libgcc-4.8-dev
- libgnutls-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
- libncurses5-dev
- libnfs-dev
- libnss3-dev
- libpixman-1-dev
- libpng12-dev
- librados-dev
- libsdl1.2-dev
- libseccomp-dev
- libspice-protocol-dev
- libspice-server-dev
- libssh2-1-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvte-2.91-dev
- sparse
- uuid-dev
- gcovr
homebrew:
packages:
- glib
- pixman
# The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu
# to prevent IRC notifications from forks. This was created using:
# $ travis encrypt -r "qemu/qemu" "irc.oftc.net#qemu"
- clang
notifications:
irc:
channels:
- secure: "F7GDRgjuOo5IUyRLqSkmDL7kvdU4UcH3Lm/W2db2JnDHTGCqgEdaYEYKciyCLZ57vOTsTsOgesN8iUT7hNHBd1KWKjZe9KDTZWppWRYVwAwQMzVeSOsbbU4tRoJ6Pp+3qhH1Z0eGYR9ZgKYAoTumDFgSAYRp4IscKS8jkoedOqM="
- "irc.oftc.net#qemu"
on_success: change
on_failure: always
env:
global:
- SRC_DIR="."
- BUILD_DIR="."
- BASE_CONFIG="--disable-docs --disable-tools"
- TEST_CMD="make check -j3 V=1"
- TEST_CMD=""
- EXTRA_CONFIG=""
# Development packages, EXTRA_PKGS saved for additional builds
- CORE_PKGS="libusb-1.0-0-dev libiscsi-dev librados-dev libncurses5-dev"
- NET_PKGS="libseccomp-dev libgnutls-dev libssh2-1-dev libspice-server-dev libspice-protocol-dev libnss3-dev"
- GUI_PKGS="libgtk-3-dev libvte-2.90-dev libsdl1.2-dev libpng12-dev libpixman-1-dev"
- EXTRA_PKGS=""
matrix:
# Group major targets together with their linux-user counterparts
- TARGETS=alpha-softmmu,alpha-linux-user
- TARGETS=arm-softmmu,arm-linux-user,armeb-linux-user,aarch64-softmmu,aarch64-linux-user
- TARGETS=cris-softmmu,cris-linux-user
- TARGETS=i386-softmmu,i386-linux-user,x86_64-softmmu,x86_64-linux-user
- TARGETS=m68k-softmmu,m68k-linux-user
- TARGETS=microblaze-softmmu,microblazeel-softmmu,microblaze-linux-user,microblazeel-linux-user
- TARGETS=mips-softmmu,mips64-softmmu,mips64el-softmmu,mipsel-softmmu
- TARGETS=mips-linux-user,mips64-linux-user,mips64el-linux-user,mipsel-linux-user,mipsn32-linux-user,mipsn32el-linux-user
- TARGETS=or32-softmmu,or32-linux-user
- TARGETS=ppc-softmmu,ppc64-softmmu,ppcemb-softmmu,ppc-linux-user,ppc64-linux-user,ppc64abi32-linux-user,ppc64le-linux-user
- TARGETS=s390x-softmmu,s390x-linux-user
- TARGETS=sh4-softmmu,sh4eb-softmmu,sh4-linux-user sh4eb-linux-user
- TARGETS=sparc-softmmu,sparc64-softmmu,sparc-linux-user,sparc32plus-linux-user,sparc64-linux-user
- TARGETS=unicore32-softmmu,unicore32-linux-user
# Group remaining softmmu only targets into one build
- TARGETS=lm32-softmmu,moxie-softmmu,tricore-softmmu,xtensa-softmmu,xtensaeb-softmmu
git:
# we want to do this ourselves
submodules: false
before_install:
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
- sudo apt-get update -qq
- sudo apt-get install -qq ${CORE_PKGS} ${NET_PKGS} ${GUI_PKGS} ${EXTRA_PKGS}
before_script:
- mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
- ${SRC_DIR}/configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
- ./configure --target-list=${TARGETS} --enable-debug-tcg ${EXTRA_CONFIG}
script:
- make -j3 && ${TEST_CMD}
- make -j2 && ${TEST_CMD}
matrix:
# We manually include a number of additional build for non-standard bits
include:
# Make check target (we only do this once)
- env:
- CONFIG="--disable-system"
- env:
- CONFIG="--disable-user"
- env:
- CONFIG="--enable-debug --enable-debug-tcg --disable-user"
# TCG debug can be run just on it's own and is mostly agnostic to user/softmmu distinctions
- env:
- CONFIG="--enable-debug-tcg --disable-system"
- env:
- CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-libusb --disable-user --disable-replication"
- env:
- CONFIG="--enable-modules --disable-linux-user"
# Alternate coroutines implementations are only really of interest to KVM users
# However we can't test against KVM on Travis so we can only run unit tests
- env:
- CONFIG="--with-coroutine=ucontext --disable-tcg"
- TEST_CMD="make check-unit -j3 V=1"
- env:
- CONFIG="--with-coroutine=sigaltstack --disable-tcg"
- TEST_CMD="make check-unit -j3 V=1"
# Check we can build docs and tools
- env:
- BASE_CONFIG="--enable-tools --enable-docs"
- CONFIG="--target-list=x86_64-softmmu,aarch64-linux-user"
addons:
apt:
packages:
- python-sphinx
- texinfo
- perl
# Test out-of-tree builds
- env:
- CONFIG="--enable-debug --enable-debug-tcg"
- BUILD_DIR="out-of-tree/build/dir" SRC_DIR="../../.."
# Test with Clang for compile portability (Travis uses clang-5.0)
- env:
- CONFIG="--disable-system"
compiler: clang
- env:
- CONFIG="--disable-user"
compiler: clang
# gprof/gcov are GCC features
- env:
- CONFIG="--enable-gprof --enable-gcov --disable-pie --target-list=aarch64-softmmu,arm-softmmu,i386-softmmu,mips-softmmu,mips64-softmmu,ppc64-softmmu,riscv64-softmmu,s390x-softmmu,x86_64-softmmu"
after_success:
- ${SRC_DIR}/scripts/travis/coverage-summary.sh
# We manually include builds which we disable "make check" for
- env:
- CONFIG="--enable-debug --enable-tcg-interpreter"
- TEST_CMD=""
# We don't need to exercise every backend with every front-end
- env:
- CONFIG="--enable-trace-backends=log,simple,syslog --disable-system"
- TEST_CMD=""
- env:
- CONFIG="--enable-trace-backends=ftrace --target-list=x86_64-softmmu"
- TEST_CMD=""
- env:
- CONFIG="--enable-trace-backends=ust --target-list=x86_64-softmmu"
- TEST_CMD=""
# MacOSX builds
- env:
- CONFIG="--target-list=aarch64-softmmu,arm-softmmu,i386-softmmu,mips-softmmu,mips64-softmmu,ppc64-softmmu,riscv64-softmmu,s390x-softmmu,x86_64-softmmu"
os: osx
osx_image: xcode9.4
compiler: clang
# Python builds
- env:
- CONFIG="--target-list=x86_64-softmmu"
language: python
python:
- "3.4"
- env:
- CONFIG="--target-list=x86_64-softmmu"
language: python
python:
- "3.6"
# Acceptance (Functional) tests
- env:
- CONFIG="--python=/usr/bin/python3 --target-list=x86_64-softmmu"
- TEST_CMD="make AVOCADO_SHOW=app check-acceptance"
addons:
apt:
packages:
- python3-pip
- python3.5-venv
# Using newer GCC with sanitizers
- addons:
apt:
update: true
sources:
# PPAs for newer toolchains
- ubuntu-toolchain-r-test
packages:
# Extra toolchains
- gcc-7
- g++-7
# Build dependencies
- libaio-dev
- libattr1-dev
- libbrlapi-dev
- libcap-ng-dev
- libgnutls-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
- libnfs-dev
- libncurses5-dev
- libnss3-dev
- libpixman-1-dev
- libpng12-dev
- librados-dev
- libsdl1.2-dev
- libseccomp-dev
- libspice-protocol-dev
- libspice-server-dev
- libssh2-1-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvte-2.91-dev
- sparse
- uuid-dev
language: generic
compiler: none
env:
- COMPILER_NAME=gcc CXX=g++-7 CC=gcc-7
- CONFIG="--cc=gcc-7 --cxx=g++-7 --disable-pie --disable-linux-user"
- TEST_CMD=""
before_script:
- ./configure ${CONFIG} --extra-cflags="-g3 -O0 -fsanitize=thread -fuse-ld=gold" || { cat config.log && exit 1; }
- env:
- CONFIG="--disable-system"
- TEST_CMD="make -j3 check-tcg V=1"
- TARGETS=alpha-softmmu,arm-softmmu,aarch64-softmmu,cris-softmmu,
i386-softmmu,x86_64-softmmu,m68k-softmmu,microblaze-softmmu,
microblazeel-softmmu,mips-softmmu,mips64-softmmu,
mips64el-softmmu,mipsel-softmmu,or32-softmmu,ppc-softmmu,
ppc64-softmmu,ppcemb-softmmu,s390x-softmmu,sh4-softmmu,
sh4eb-softmmu,sparc-softmmu,sparc64-softmmu,
unicore32-softmmu,unicore32-linux-user,
lm32-softmmu,moxie-softmmu,tricore-softmmu,xtensa-softmmu,
xtensaeb-softmmu
TEST_CMD="make check"
compiler: gcc
# Debug related options
- env: TARGETS=i386-softmmu,x86_64-softmmu
EXTRA_CONFIG="--enable-debug"
compiler: gcc
- env: TARGETS=i386-softmmu,x86_64-softmmu
EXTRA_CONFIG="--enable-debug --enable-tcg-interpreter"
compiler: gcc
# All the extra -dev packages
- env: TARGETS=i386-softmmu,x86_64-softmmu
EXTRA_PKGS="libaio-dev libcap-ng-dev libattr1-dev libbrlapi-dev uuid-dev libusb-1.0.0-dev"
compiler: gcc
# Currently configure doesn't force --disable-pie
- env: TARGETS=i386-softmmu,x86_64-softmmu
EXTRA_CONFIG="--enable-gprof --enable-gcov --disable-pie"
compiler: gcc
- env: TARGETS=i386-softmmu,x86_64-softmmu
EXTRA_PKGS="sparse"
EXTRA_CONFIG="--enable-sparse"
compiler: gcc
# All the trace backends (apart from dtrace)
- env: TARGETS=i386-softmmu,x86_64-softmmu
EXTRA_CONFIG="--enable-trace-backends=stderr"
compiler: gcc
- env: TARGETS=i386-softmmu,x86_64-softmmu
EXTRA_CONFIG="--enable-trace-backends=simple"
compiler: gcc
- env: TARGETS=i386-softmmu,x86_64-softmmu
EXTRA_CONFIG="--enable-trace-backends=ftrace"
compiler: gcc
- env: TARGETS=i386-softmmu,x86_64-softmmu
EXTRA_PKGS="liblttng-ust-dev liburcu-dev"
EXTRA_CONFIG="--enable-trace-backends=ust"
compiler: gcc
- env: TARGETS=i386-softmmu,x86_64-softmmu
EXTRA_CONFIG="--enable-modules"
compiler: gcc

View File

@@ -9,7 +9,7 @@ patches before submitting.
Of course, the most important aspect in any coding style is whitespace.
Crusty old coders who have trouble spotting the glasses on their noses
can tell the difference between a tab and eight spaces from a distance
of approximately fifteen parsecs. Many a flamewar has been fought and
of approximately fifteen parsecs. Many a flamewar have been fought and
lost on this issue.
QEMU indents are four spaces. Tabs are never used, except in Makefiles
@@ -31,11 +31,7 @@ Do not leave whitespace dangling off the ends of lines.
2. Line width
Lines should be 80 characters; try not to make them longer.
Sometimes it is hard to do, especially when dealing with QEMU subsystems
that use long function or symbol names. Even in that case, do not make
lines much longer than 80 characters.
Lines are 80 characters; not longer.
Rationale:
- Some people like to tile their 24" screens with a 6x4 matrix of 80x24
@@ -43,8 +39,6 @@ Rationale:
let them keep doing it.
- Code and especially patches is much more readable if limited to a sane
line length. Eighty is traditional.
- The four-space indentation makes the most common excuse ("But look
at all that white space on the left!") moot.
- It is the QEMU coding style.
3. Naming
@@ -93,15 +87,10 @@ Furthermore, it is the QEMU coding style.
5. Declarations
Mixed declarations (interleaving statements and declarations within
blocks) are generally not allowed; declarations should be at the beginning
of blocks.
Every now and then, an exception is made for declarations inside a
#ifdef or #ifndef block: if the code looks nicer, such declarations can
be placed at the top of the block even if there are statements above.
On the other hand, however, it's often best to move that #ifdef/#ifndef
block to a separate function altogether.
Mixed declarations (interleaving statements and declarations within blocks)
are not allowed; declarations should be at the beginning of blocks. In other
words, the code should not generate warnings if using GCC's
-Wdeclaration-after-statement option.
6. Conditional statements
@@ -116,62 +105,3 @@ if (a == 1) {
Rationale: Yoda conditions (as in 'if (1 == a)') are awkward to read.
Besides, good compilers already warn users when '==' is mis-typed as '=',
even when the constant is on the right.
7. Comment style
We use traditional C-style /* */ comments and avoid // comments.
Rationale: The // form is valid in C99, so this is purely a matter of
consistency of style. The checkpatch script will warn you about this.
Multiline comment blocks should have a row of stars on the left,
and the initial /* and terminating */ both on their own lines:
/*
* like
* this
*/
This is the same format required by the Linux kernel coding style.
(Some of the existing comments in the codebase use the GNU Coding
Standards form which does not have stars on the left, or other
variations; avoid these when writing new comments, but don't worry
about converting to the preferred form unless you're editing that
comment anyway.)
Rationale: Consistency, and ease of visually picking out a multiline
comment from the surrounding code.
8. trace-events style
8.1 0x prefix
In trace-events files, use a '0x' prefix to specify hex numbers, as in:
some_trace(unsigned x, uint64_t y) "x 0x%x y 0x" PRIx64
An exception is made for groups of numbers that are hexadecimal by
convention and separated by the symbols '.', '/', ':', or ' ' (such as
PCI bus id):
another_trace(int cssid, int ssid, int dev_num) "bus id: %x.%x.%04x"
However, you can use '0x' for such groups if you want. Anyway, be sure that
it is obvious that numbers are in hex, ex.:
data_dump(uint8_t c1, uint8_t c2, uint8_t c3) "bytes (in hex): %02x %02x %02x"
Rationale: hex numbers are hard to read in logs when there is no 0x prefix,
especially when (occasionally) the representation doesn't contain any letters
and especially in one line with other decimal numbers. Number groups are allowed
to not use '0x' because for some things notations like %x.%x.%x are used not
only in Qemu. Also dumping raw data bytes with '0x' is less readable.
8.2 '#' printf flag
Do not use printf flag '#', like '%#x'.
Rationale: there are two ways to add a '0x' prefix to printed number: '0x%...'
and '%#...'. For consistency the only one way should be used. Arguments for
'0x%' are:
- it is more popular
- '%#' omits the 0x for the value 0 which makes output inconsistent

View File

@@ -1,8 +1,8 @@
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
@@ -10,7 +10,7 @@
as the successor of the GNU Library Public License, version 2, hence
the version number 2.1.]
Preamble
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
@@ -112,7 +112,7 @@ modification follow. Pay close attention to the difference between a
former contains code derived from the library, whereas the latter must
be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other
@@ -146,7 +146,7 @@ such a program is covered only if its contents constitute a work based
on the Library (independent of the use of the Library in a tool for
writing it). Whether that is true depends on what the Library does
and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
@@ -432,7 +432,7 @@ decision will be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
@@ -455,7 +455,7 @@ FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
@@ -476,7 +476,7 @@ convey the exclusion of warranty; and each file should have at least the
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -485,7 +485,7 @@ convey the exclusion of warranty; and each file should have at least the
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
@@ -500,3 +500,5 @@ necessary. Here is a sample; alter the names:
Ty Coon, President of Vice
That's all there is to it!

View File

@@ -1,6 +1,6 @@
This file documents changes for QEMU releases 0.12 and earlier.
For changelog information for later releases, see
https://wiki.qemu.org/ChangeLog or look at the git history for
http://wiki.qemu-project.org/ChangeLog or look at the git history for
more detailed information.

86
HACKING
View File

@@ -1,28 +1,10 @@
1. Preprocessor
1.1. Variadic macros
For variadic macros, stick with this C99-like syntax:
#define DPRINTF(fmt, ...) \
do { printf("IRQ: " fmt, ## __VA_ARGS__); } while (0)
1.2. Include directives
Order include directives as follows:
#include "qemu/osdep.h" /* Always first... */
#include <...> /* then system headers... */
#include "..." /* and finally QEMU headers. */
The "qemu/osdep.h" header contains preprocessor macros that affect the behavior
of core system headers like <stdint.h>. It must be the first include so that
core system headers included by external libraries get the preprocessor macros
that QEMU depends on.
Do not include "qemu/osdep.h" from header files since the .c file will have
already included it.
2. C types
It should be common sense to use the right type, but we have collected
@@ -118,15 +100,6 @@ Please note that g_malloc will exit on allocation failure, so there
is no need to test for failure (as you would have to with malloc).
Calling g_malloc with a zero size is valid and will return NULL.
Prefer g_new(T, n) instead of g_malloc(sizeof(T) * n) for the following
reasons:
a. It catches multiplication overflowing size_t;
b. It returns T * instead of void *, letting compiler catch more type
errors.
Declarations like T *v = g_malloc(sizeof(*v)) are acceptable, though.
Memory allocated by qemu_memalign or qemu_blockalign must be freed with
qemu_vfree, since breaking this will cause problems on Win32.
@@ -184,62 +157,3 @@ painful. These are:
* you may assume that integers are 2s complement representation
* you may assume that right shift of a signed integer duplicates
the sign bit (ie it is an arithmetic shift, not a logical shift)
In addition, QEMU assumes that the compiler does not use the latitude
given in C99 and C11 to treat aspects of signed '<<' as undefined, as
documented in the GNU Compiler Collection manual starting at version 4.0.
7. Error handling and reporting
7.1 Reporting errors to the human user
Do not use printf(), fprintf() or monitor_printf(). Instead, use
error_report() or error_vreport() from error-report.h. This ensures the
error is reported in the right place (current monitor or stderr), and in
a uniform format.
Use error_printf() & friends to print additional information.
error_report() prints the current location. In certain common cases
like command line parsing, the current location is tracked
automatically. To manipulate it manually, use the loc_*() from
error-report.h.
7.2 Propagating errors
An error can't always be reported to the user right where it's detected,
but often needs to be propagated up the call chain to a place that can
handle it. This can be done in various ways.
The most flexible one is Error objects. See error.h for usage
information.
Use the simplest suitable method to communicate success / failure to
callers. Stick to common methods: non-negative on success / -1 on
error, non-negative / -errno, non-null / null, or Error objects.
Example: when a function returns a non-null pointer on success, and it
can fail only in one way (as far as the caller is concerned), returning
null on failure is just fine, and certainly simpler and a lot easier on
the eyes than propagating an Error object through an Error ** parameter.
Example: when a function's callers need to report details on failure
only the function really knows, use Error **, and set suitable errors.
Do not report an error to the user when you're also returning an error
for somebody else to handle. Leave the reporting to the place that
consumes the error returned.
7.3 Handling errors
Calling exit() is fine when handling configuration errors during
startup. It's problematic during normal operation. In particular,
monitor commands should never exit().
Do not call exit() or abort() to handle an error that can be triggered
by the guest (e.g., some unimplemented corner case in guest code
translation or device emulation). Guests should not be able to
terminate QEMU.
Note that &error_fatal is just another way to exit(1), and &error_abort
is just another way to abort().

File diff suppressed because it is too large Load Diff

840
Makefile

File diff suppressed because it is too large Load Diff

View File

@@ -1,42 +1,38 @@
#######################################################################
# Common libraries for tools and emulators
stub-obj-y = stubs/ util/ crypto/
util-obj-y = util/ qobject/ qapi/
chardev-obj-y = chardev/
slirp-obj-$(CONFIG_SLIRP) = slirp/
#######################################################################
# authz-obj-y is code used by both qemu system emulation and qemu-img
authz-obj-y = authz/
stub-obj-y = stubs/
util-obj-y = util/ qobject/ qapi/ qapi-types.o qapi-visit.o qapi-event.o
util-obj-y += crypto/
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y += nbd/
block-obj-y += block.o blockjob.o job.o
block-obj-y += block/ scsi/
block-obj-y = async.o thread-pool.o
block-obj-y += nbd.o block.o blockjob.o
block-obj-y += main-loop.o iohandler.o qemu-timer.o
block-obj-$(CONFIG_POSIX) += aio-posix.o
block-obj-$(CONFIG_WIN32) += aio-win32.o
block-obj-y += block/
block-obj-y += qemu-io-cmds.o
block-obj-$(CONFIG_REPLICATION) += replication.o
block-obj-y += qemu-coroutine.o qemu-coroutine-lock.o qemu-coroutine-io.o
block-obj-y += qemu-coroutine-sleep.o
block-obj-y += coroutine-$(CONFIG_COROUTINE_BACKEND).o
block-obj-m = block/
#######################################################################
# crypto-obj-y is code used by both qemu system emulation and qemu-img
crypto-obj-y = crypto/
crypto-aes-obj-y = crypto/
######################################################################
# smartcard
#######################################################################
# qom-obj-y is code used by both qemu system emulation and qemu-img
qom-obj-y = qom/
#######################################################################
# io-obj-y is code used by both qemu system emulation and qemu-img
io-obj-y = io/
libcacard-y += libcacard/cac.o libcacard/event.o
libcacard-y += libcacard/vcard.o libcacard/vreader.o
libcacard-y += libcacard/vcard_emul_nss.o
libcacard-y += libcacard/vcard_emul_type.o
libcacard-y += libcacard/card_7816.o
libcacard-y += libcacard/vcardt.o
libcacard/vcard_emul_nss.o-cflags := $(NSS_CFLAGS)
libcacard/vcard_emul_nss.o-libs := $(NSS_LIBS)
######################################################################
# Target independent part of system emulation. The long term path is to
@@ -45,8 +41,7 @@ io-obj-y = io/
ifeq ($(CONFIG_SOFTMMU),y)
common-obj-y = blockdev.o blockdev-nbd.o block/
common-obj-y += bootdevice.o iothread.o
common-obj-y += job-qmp.o
common-obj-y += iothread.o
common-obj-y += net/
common-obj-y += qdev-monitor.o device-hotplug.o
common-obj-$(CONFIG_WIN32) += os-win32.o
@@ -55,42 +50,46 @@ common-obj-$(CONFIG_POSIX) += os-posix.o
common-obj-$(CONFIG_LINUX) += fsdev/
common-obj-y += migration/
common-obj-y += qemu-char.o #aio.o
common-obj-y += page_cache.o
common-obj-y += qjson.o
common-obj-$(CONFIG_SPICE) += spice-qemu-char.o
common-obj-y += audio/
common-obj-m += audio/
common-obj-y += hw/
common-obj-y += replay/
common-obj-y += accel.o
common-obj-y += ui/
common-obj-m += ui/
common-obj-y += bt-host.o bt-vhci.o
bt-host.o-cflags := $(BLUEZ_CFLAGS)
common-obj-y += dma-helpers.o
common-obj-y += vl.o
vl.o-cflags := $(GPROF_CFLAGS) $(SDL_CFLAGS)
common-obj-$(CONFIG_TPM) += tpm.o
common-obj-y += tpm.o
common-obj-$(CONFIG_SLIRP) += slirp/
common-obj-y += backends/
common-obj-y += chardev/
common-obj-$(CONFIG_SECCOMP) += qemu-seccomp.o
qemu-seccomp.o-cflags := $(SECCOMP_CFLAGS)
qemu-seccomp.o-libs := $(SECCOMP_LIBS)
common-obj-$(CONFIG_SMARTCARD_NSS) += $(libcacard-y)
common-obj-$(CONFIG_FDT) += device_tree.o
######################################################################
# qapi
common-obj-y += qmp-marshal.o
common-obj-y += qmp.o hmp.o
common-obj-y += qapi/
endif
#######################################################################
# Target-independent parts used in system and user emulation
common-obj-y += cpus-common.o
common-obj-y += qemu-log.o
common-obj-y += tcg-runtime.o
common-obj-y += hw/
common-obj-y += qom/
common-obj-y += disas/
@@ -98,6 +97,7 @@ common-obj-y += disas/
######################################################################
# Resource file for Windows executables
version-obj-$(CONFIG_WIN32) += $(BUILD_DIR)/version.o
version-lobj-$(CONFIG_WIN32) += $(BUILD_DIR)/version.lo
######################################################################
# tracing
@@ -107,95 +107,7 @@ target-obj-y += trace/
######################################################################
# guest agent
# FIXME: a few definitions from qapi/qapi-types.o and
# qapi/qapi-visit.o are needed by libqemuutil.a. These should be
# extracted into a QAPI schema module, or perhaps a separate schema.
# FIXME: a few definitions from qapi-types.o/qapi-visit.o are needed
# by libqemuutil.a. These should be moved to a separate .json schema.
qga-obj-y = qga/
qga-vss-dll-obj-y = qga/
######################################################################
# contrib
elf2dmp-obj-y = contrib/elf2dmp/
ivshmem-client-obj-$(CONFIG_IVSHMEM) = contrib/ivshmem-client/
ivshmem-server-obj-$(CONFIG_IVSHMEM) = contrib/ivshmem-server/
libvhost-user-obj-y = contrib/libvhost-user/
vhost-user-scsi.o-cflags := $(LIBISCSI_CFLAGS)
vhost-user-scsi.o-libs := $(LIBISCSI_LIBS)
vhost-user-scsi-obj-y = contrib/vhost-user-scsi/
vhost-user-blk-obj-y = contrib/vhost-user-blk/
rdmacm-mux-obj-y = contrib/rdmacm-mux/
######################################################################
trace-events-subdirs =
trace-events-subdirs += accel/kvm
trace-events-subdirs += accel/tcg
trace-events-subdirs += audio
trace-events-subdirs += authz
trace-events-subdirs += block
trace-events-subdirs += chardev
trace-events-subdirs += crypto
trace-events-subdirs += hw/9pfs
trace-events-subdirs += hw/acpi
trace-events-subdirs += hw/alpha
trace-events-subdirs += hw/arm
trace-events-subdirs += hw/audio
trace-events-subdirs += hw/block
trace-events-subdirs += hw/block/dataplane
trace-events-subdirs += hw/char
trace-events-subdirs += hw/display
trace-events-subdirs += hw/dma
trace-events-subdirs += hw/hppa
trace-events-subdirs += hw/i2c
trace-events-subdirs += hw/i386
trace-events-subdirs += hw/i386/xen
trace-events-subdirs += hw/ide
trace-events-subdirs += hw/input
trace-events-subdirs += hw/intc
trace-events-subdirs += hw/isa
trace-events-subdirs += hw/mem
trace-events-subdirs += hw/misc
trace-events-subdirs += hw/misc/macio
trace-events-subdirs += hw/net
trace-events-subdirs += hw/nvram
trace-events-subdirs += hw/pci
trace-events-subdirs += hw/pci-host
trace-events-subdirs += hw/ppc
trace-events-subdirs += hw/rdma
trace-events-subdirs += hw/rdma/vmw
trace-events-subdirs += hw/s390x
trace-events-subdirs += hw/scsi
trace-events-subdirs += hw/sd
trace-events-subdirs += hw/sparc
trace-events-subdirs += hw/sparc64
trace-events-subdirs += hw/timer
trace-events-subdirs += hw/tpm
trace-events-subdirs += hw/usb
trace-events-subdirs += hw/vfio
trace-events-subdirs += hw/virtio
trace-events-subdirs += hw/watchdog
trace-events-subdirs += hw/xen
trace-events-subdirs += hw/gpio
trace-events-subdirs += io
trace-events-subdirs += linux-user
trace-events-subdirs += migration
trace-events-subdirs += nbd
trace-events-subdirs += net
trace-events-subdirs += qapi
trace-events-subdirs += qom
trace-events-subdirs += scsi
trace-events-subdirs += target/arm
trace-events-subdirs += target/i386
trace-events-subdirs += target/mips
trace-events-subdirs += target/ppc
trace-events-subdirs += target/s390x
trace-events-subdirs += target/sparc
trace-events-subdirs += ui
trace-events-subdirs += util
trace-events-files = $(SRC_PATH)/trace-events $(trace-events-subdirs:%=$(SRC_PATH)/%/trace-events)
trace-obj-y = trace-root.o
trace-obj-y += $(trace-events-subdirs:%=%/trace.o)
trace-obj-$(CONFIG_TRACE_UST) += trace-ust-all.o
trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace-root.o
trace-obj-$(CONFIG_TRACE_DTRACE) += $(trace-events-subdirs:%=%/trace-dtrace.o)

View File

@@ -7,13 +7,13 @@ include config-target.mak
include config-devices.mak
include $(SRC_PATH)/rules.mak
$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
$(call set-vpath, $(SRC_PATH))
ifdef CONFIG_LINUX
QEMU_CFLAGS += -I../linux-headers
endif
QEMU_CFLAGS += -iquote .. -iquote $(SRC_PATH)/target/$(TARGET_BASE_ARCH) -DNEED_CPU_H
QEMU_CFLAGS += -I.. -I$(SRC_PATH)/target-$(TARGET_BASE_ARCH) -DNEED_CPU_H
QEMU_CFLAGS+=-iquote $(SRC_PATH)/include
QEMU_CFLAGS+=-I$(SRC_PATH)/include
ifdef CONFIG_USER_ONLY
# user emulator name
@@ -22,11 +22,11 @@ QEMU_PROG_BUILD = $(QEMU_PROG)
else
# system emulator name
QEMU_PROG=qemu-system-$(TARGET_NAME)$(EXESUF)
ifneq (,$(findstring -mwindows,$(SDL_LIBS)))
ifneq (,$(findstring -mwindows,$(libs_softmmu)))
# Terminate program name with a 'w' because the linker builds a windows executable.
QEMU_PROGW=qemu-system-$(TARGET_NAME)w$(EXESUF)
$(QEMU_PROG): $(QEMU_PROGW)
$(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG),"GEN","$(TARGET_DIR)$(QEMU_PROG)")
$(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG)," GEN $(TARGET_DIR)$(QEMU_PROG)")
QEMU_PROG_BUILD = $(QEMU_PROGW)
else
QEMU_PROG_BUILD = $(QEMU_PROG)
@@ -36,16 +36,11 @@ endif
PROGS=$(QEMU_PROG) $(QEMU_PROGW)
STPFILES=
# Makefile Tests
ifdef CONFIG_USER_ONLY
include $(SRC_PATH)/tests/tcg/Makefile.include
endif
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp $(QEMU_PROG)-log.stp
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
@@ -53,49 +48,34 @@ else
TARGET_TYPE=system
endif
tracetool-y = $(SRC_PATH)/scripts/tracetool.py
tracetool-y += $(shell find $(SRC_PATH)/scripts/tracetool -name "*.py")
$(QEMU_PROG).stp-installed: $(BUILD_DIR)/trace-events-all $(tracetool-y)
$(QEMU_PROG).stp-installed: $(SRC_PATH)/trace-events
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=stap \
--backends=$(TRACE_BACKENDS) \
--binary=$(bindir)/$(QEMU_PROG) \
--target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG).stp-installed")
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG).stp-installed")
$(QEMU_PROG).stp: $(BUILD_DIR)/trace-events-all $(tracetool-y)
$(QEMU_PROG).stp: $(SRC_PATH)/trace-events
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=stap \
--backends=$(TRACE_BACKENDS) \
--binary=$(realpath .)/$(QEMU_PROG) \
--target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG).stp")
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG).stp")
$(QEMU_PROG)-simpletrace.stp: $(BUILD_DIR)/trace-events-all $(tracetool-y)
$(QEMU_PROG)-simpletrace.stp: $(SRC_PATH)/trace-events
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=simpletrace-stap \
--backends=$(TRACE_BACKENDS) \
--probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
$(QEMU_PROG)-log.stp: $(BUILD_DIR)/trace-events-all $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=log-stap \
--backends=$(TRACE_BACKENDS) \
--probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-log.stp")
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
else
stap:
endif
.PHONY: stap
all: $(PROGS) stap
@@ -104,28 +84,31 @@ all: $(PROGS) stap
#########################################################
# cpu emulator library
obj-y += exec.o
obj-y += accel/
obj-$(CONFIG_TCG) += tcg/tcg.o tcg/tcg-op.o tcg/tcg-op-vec.o tcg/tcg-op-gvec.o
obj-$(CONFIG_TCG) += tcg/tcg-common.o tcg/optimize.o
obj-$(CONFIG_TCG_INTERPRETER) += tcg/tci.o
obj-y = exec.o translate-all.o cpu-exec.o
obj-y += tcg/tcg.o tcg/tcg-op.o tcg/optimize.o
obj-$(CONFIG_TCG_INTERPRETER) += tci.o
obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
obj-$(CONFIG_TCG) += fpu/softfloat.o
obj-y += target/$(TARGET_BASE_ARCH)/
obj-y += fpu/softfloat.o
obj-y += target-$(TARGET_BASE_ARCH)/
obj-y += disas.o
obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decContext.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decNumber.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal32.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal64.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal128.o
#########################################################
# Linux user emulator target
ifdef CONFIG_LINUX_USER
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) \
-I$(SRC_PATH)/linux-user/host/$(ARCH) \
-I$(SRC_PATH)/linux-user
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) -I$(SRC_PATH)/linux-user
obj-y += linux-user/
obj-y += gdbstub.o thunk.o
obj-y += gdbstub.o thunk.o user-exec.o
endif #CONFIG_LINUX_USER
@@ -138,7 +121,7 @@ QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR) \
-I$(SRC_PATH)/bsd-user/$(HOST_VARIANT_DIR)
obj-y += bsd-user/
obj-y += gdbstub.o
obj-y += gdbstub.o user-exec.o
endif #CONFIG_BSD_USER
@@ -146,16 +129,21 @@ endif #CONFIG_BSD_USER
# System emulator target
ifdef CONFIG_SOFTMMU
obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o numa.o
obj-y += qtest.o
obj-y += qtest.o bootdevice.o
obj-y += hw/
obj-y += qapi/
obj-y += memory.o
obj-$(CONFIG_KVM) += kvm-all.o
obj-y += memory.o cputlb.o
obj-y += memory_mapping.o
obj-y += dump.o
obj-$(TARGET_X86_64) += win_dump.o
obj-y += migration/ram.o
obj-y += migration/ram.o migration/savevm.o
LIBS := $(libs_softmmu) $(LIBS)
# xen support
obj-$(CONFIG_XEN) += xen-common.o
obj-$(CONFIG_XEN_I386) += xen-hvm.o xen-mapcache.o
obj-$(call lnot,$(CONFIG_XEN)) += xen-common-stub.o
obj-$(call lnot,$(CONFIG_XEN_I386)) += xen-hvm-stub.o
# Hardware support
ifeq ($(TARGET_NAME), sparc64)
obj-y += hw/sparc64/
@@ -163,69 +151,55 @@ else
obj-y += hw/$(TARGET_BASE_ARCH)/
endif
GENERATED_FILES += hmp-commands.h hmp-commands-info.h
GENERATED_HEADERS += hmp-commands.h qmp-commands-old.h
endif # CONFIG_SOFTMMU
# Workaround for http://gcc.gnu.org/PR55489, see configure.
%/translate.o: QEMU_CFLAGS += $(TRANSLATE_OPT_CFLAGS)
dummy := $(call unnest-vars,,obj-y)
all-obj-y := $(obj-y)
target-obj-y :=
block-obj-y :=
common-obj-y :=
chardev-obj-y :=
slirp-obj-y :=
include $(SRC_PATH)/Makefile.objs
dummy := $(call unnest-vars,,target-obj-y)
target-obj-y-save := $(target-obj-y)
dummy := $(call unnest-vars,.., \
authz-obj-y \
block-obj-y \
block-obj-m \
chardev-obj-y \
crypto-obj-y \
crypto-aes-obj-y \
qom-obj-y \
io-obj-y \
common-obj-y \
common-obj-m \
slirp-obj-y)
common-obj-m)
target-obj-y := $(target-obj-y-save)
all-obj-y += $(common-obj-y)
all-obj-y += $(target-obj-y)
all-obj-y += $(qom-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(authz-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y)
all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(slirp-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y)
$(QEMU_PROG_BUILD): config-devices.mak
COMMON_LDADDS = ../libqemuutil.a
# build either PROG or PROGW
$(QEMU_PROG_BUILD): $(all-obj-y) $(COMMON_LDADDS)
$(QEMU_PROG_BUILD): $(all-obj-y) ../libqemuutil.a ../libqemustub.a
$(call LINK, $(filter-out %.mak, $^))
ifdef CONFIG_DARWIN
$(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@,"REZ","$(TARGET_DIR)$@")
$(call quiet-command,SetFile -a C $@,"SETFILE","$(TARGET_DIR)$@")
$(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@," REZ $(TARGET_DIR)$@")
$(call quiet-command,SetFile -a C $@," SETFILE $(TARGET_DIR)$@")
endif
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES),"GEN","$(TARGET_DIR)$@")
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES)," GEN $(TARGET_DIR)$@")
hmp-commands.h: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$(TARGET_DIR)$@")
hmp-commands.h: $(SRC_PATH)/hmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
hmp-commands-info.h: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$(TARGET_DIR)$@")
qmp-commands-old.h: $(SRC_PATH)/qmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
clean: clean-target
clean:
rm -f *.a *~ $(PROGS)
rm -f $(shell find . -name '*.[od]')
rm -f hmp-commands.h gdbstub-xml.c
rm -f hmp-commands.h qmp-commands-old.h gdbstub-xml.c
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
@@ -238,8 +212,7 @@ ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
$(INSTALL_DATA) $(QEMU_PROG)-simpletrace.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-simpletrace.stp"
$(INSTALL_DATA) $(QEMU_PROG)-log.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-log.stp"
endif
GENERATED_FILES += config-target.h
Makefile: $(GENERATED_FILES)
GENERATED_HEADERS += config-target.h
Makefile: $(GENERATED_HEADERS)

140
README
View File

@@ -1,139 +1,3 @@
QEMU README
===========
Read the documentation in qemu-doc.html or on http://wiki.qemu-project.org
QEMU is a generic and open source machine & userspace emulator and
virtualizer.
QEMU is capable of emulating a complete machine in software without any
need for hardware virtualization support. By using dynamic translation,
it achieves very good performance. QEMU can also integrate with the Xen
and KVM hypervisors to provide emulated hardware while allowing the
hypervisor to manage the CPU. With hypervisor support, QEMU can achieve
near native performance for CPUs. When QEMU emulates CPUs directly it is
capable of running operating systems made for one machine (e.g. an ARMv7
board) on a different machine (e.g. an x86_64 PC board).
QEMU is also capable of providing userspace API virtualization for Linux
and BSD kernel interfaces. This allows binaries compiled against one
architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a
different architecture ABI (e.g. the Linux x86_64 ABI). This does not
involve any hardware emulation, simply CPU and syscall emulation.
QEMU aims to fit into a variety of use cases. It can be invoked directly
by users wishing to have full control over its behaviour and settings.
It also aims to facilitate integration into higher level management
layers, by providing a stable command line interface and monitor API.
It is commonly invoked indirectly via the libvirt library when using
open source applications such as oVirt, OpenStack and virt-manager.
QEMU as a whole is released under the GNU General Public License,
version 2. For full licensing details, consult the LICENSE file.
Building
========
QEMU is multi-platform software intended to be buildable on all modern
Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety
of other UNIX targets. The simple steps to build QEMU are:
mkdir build
cd build
../configure
make
Additional information can also be found online via the QEMU website:
https://qemu.org/Hosts/Linux
https://qemu.org/Hosts/Mac
https://qemu.org/Hosts/W32
Submitting patches
==================
The QEMU source code is maintained under the GIT version control system.
git clone https://git.qemu.org/git/qemu.git
When submitting patches, one common approach is to use 'git
format-patch' and/or 'git send-email' to format & send the mail to the
qemu-devel@nongnu.org mailing list. All patches submitted must contain
a 'Signed-off-by' line from the author. Patches should follow the
guidelines set out in the HACKING and CODING_STYLE files.
Additional information on submitting patches can be found online via
the QEMU website
https://qemu.org/Contribute/SubmitAPatch
https://qemu.org/Contribute/TrivialPatches
The QEMU website is also maintained under source control.
git clone https://git.qemu.org/git/qemu-web.git
https://www.qemu.org/2017/02/04/the-new-qemu-website-is-up/
A 'git-publish' utility was created to make above process less
cumbersome, and is highly recommended for making regular contributions,
or even just for sending consecutive patch series revisions. It also
requires a working 'git send-email' setup, and by default doesn't
automate everything, so you may want to go through the above steps
manually for once.
For installation instructions, please go to
https://github.com/stefanha/git-publish
The workflow with 'git-publish' is:
$ git checkout master -b my-feature
$ # work on new commits, add your 'Signed-off-by' lines to each
$ git publish
Your patch series will be sent and tagged as my-feature-v1 if you need to refer
back to it in the future.
Sending v2:
$ git checkout my-feature # same topic branch
$ # making changes to the commits (using 'git rebase', for example)
$ git publish
Your patch series will be sent with 'v2' tag in the subject and the git tip
will be tagged as my-feature-v2.
Bug reporting
=============
The QEMU project uses Launchpad as its primary upstream bug tracker. Bugs
found when running code built from QEMU git or upstream released sources
should be reported via:
https://bugs.launchpad.net/qemu/
If using QEMU via an operating system vendor pre-built binary package, it
is preferable to report bugs to the vendor's own bug tracker first. If
the bug is also known to affect latest upstream code, it can also be
reported via launchpad.
For additional information on bug reporting consult:
https://qemu.org/Contribute/ReportABug
Contact
=======
The QEMU community can be contacted in a number of ways, with the two
main methods being email and IRC
- qemu-devel@nongnu.org
https://lists.nongnu.org/mailman/listinfo/qemu-devel
- #qemu on irc.oftc.net
Information on additional methods of contacting the community can be
found online via the QEMU website:
https://qemu.org/Contribute/StartHere
-- End
- QEMU team

View File

@@ -1 +1 @@
3.1.50
2.4.1

157
accel.c Normal file
View File

@@ -0,0 +1,157 @@
/*
* QEMU System Emulator, accelerator interfaces
*
* Copyright (c) 2003-2008 Fabrice Bellard
* Copyright (c) 2014 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "sysemu/accel.h"
#include "hw/boards.h"
#include "qemu-common.h"
#include "sysemu/arch_init.h"
#include "sysemu/sysemu.h"
#include "sysemu/kvm.h"
#include "sysemu/qtest.h"
#include "hw/xen/xen.h"
#include "qom/object.h"
#include "hw/boards.h"
int tcg_tb_size;
static bool tcg_allowed = true;
static int tcg_init(MachineState *ms)
{
tcg_exec_init(tcg_tb_size * 1024 * 1024);
return 0;
}
static const TypeInfo accel_type = {
.name = TYPE_ACCEL,
.parent = TYPE_OBJECT,
.class_size = sizeof(AccelClass),
.instance_size = sizeof(AccelState),
};
/* Lookup AccelClass from opt_name. Returns NULL if not found */
static AccelClass *accel_find(const char *opt_name)
{
char *class_name = g_strdup_printf(ACCEL_CLASS_NAME("%s"), opt_name);
AccelClass *ac = ACCEL_CLASS(object_class_by_name(class_name));
g_free(class_name);
return ac;
}
static int accel_init_machine(AccelClass *acc, MachineState *ms)
{
ObjectClass *oc = OBJECT_CLASS(acc);
const char *cname = object_class_get_name(oc);
AccelState *accel = ACCEL(object_new(cname));
int ret;
ms->accelerator = accel;
*(acc->allowed) = true;
ret = acc->init_machine(ms);
if (ret < 0) {
ms->accelerator = NULL;
*(acc->allowed) = false;
object_unref(OBJECT(accel));
}
return ret;
}
int configure_accelerator(MachineState *ms)
{
const char *p;
char buf[10];
int ret;
bool accel_initialised = false;
bool init_failed = false;
AccelClass *acc = NULL;
p = qemu_opt_get(qemu_get_machine_opts(), "accel");
if (p == NULL) {
/* Use the default "accelerator", tcg */
p = "tcg";
}
while (!accel_initialised && *p != '\0') {
if (*p == ':') {
p++;
}
p = get_opt_name(buf, sizeof(buf), p, ':');
acc = accel_find(buf);
if (!acc) {
fprintf(stderr, "\"%s\" accelerator not found.\n", buf);
continue;
}
if (acc->available && !acc->available()) {
printf("%s not supported for this target\n",
acc->name);
continue;
}
ret = accel_init_machine(acc, ms);
if (ret < 0) {
init_failed = true;
fprintf(stderr, "failed to initialize %s: %s\n",
acc->name,
strerror(-ret));
} else {
accel_initialised = true;
}
}
if (!accel_initialised) {
if (!init_failed) {
fprintf(stderr, "No accelerator found!\n");
}
exit(1);
}
if (init_failed) {
fprintf(stderr, "Back to %s accelerator.\n", acc->name);
}
return !accel_initialised;
}
static void tcg_accel_class_init(ObjectClass *oc, void *data)
{
AccelClass *ac = ACCEL_CLASS(oc);
ac->name = "tcg";
ac->init_machine = tcg_init;
ac->allowed = &tcg_allowed;
}
#define TYPE_TCG_ACCEL ACCEL_CLASS_NAME("tcg")
static const TypeInfo tcg_accel_type = {
.name = TYPE_TCG_ACCEL,
.parent = TYPE_ACCEL,
.class_init = tcg_accel_class_init,
};
static void register_accel_types(void)
{
type_register_static(&accel_type);
type_register_static(&tcg_accel_type);
}
type_init(register_accel_types);

View File

@@ -1,4 +0,0 @@
obj-$(CONFIG_SOFTMMU) += accel.o
obj-$(CONFIG_KVM) += kvm/
obj-$(CONFIG_TCG) += tcg/
obj-y += stubs/

View File

@@ -1,148 +0,0 @@
/*
* QEMU System Emulator, accelerator interfaces
*
* Copyright (c) 2003-2008 Fabrice Bellard
* Copyright (c) 2014 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "sysemu/accel.h"
#include "hw/boards.h"
#include "sysemu/arch_init.h"
#include "sysemu/sysemu.h"
#include "sysemu/kvm.h"
#include "sysemu/qtest.h"
#include "hw/xen/xen.h"
#include "qom/object.h"
#include "qemu/error-report.h"
#include "qemu/option.h"
#include "qapi/error.h"
static const TypeInfo accel_type = {
.name = TYPE_ACCEL,
.parent = TYPE_OBJECT,
.class_size = sizeof(AccelClass),
.instance_size = sizeof(AccelState),
};
/* Lookup AccelClass from opt_name. Returns NULL if not found */
static AccelClass *accel_find(const char *opt_name)
{
char *class_name = g_strdup_printf(ACCEL_CLASS_NAME("%s"), opt_name);
AccelClass *ac = ACCEL_CLASS(object_class_by_name(class_name));
g_free(class_name);
return ac;
}
static int accel_init_machine(AccelClass *acc, MachineState *ms)
{
ObjectClass *oc = OBJECT_CLASS(acc);
const char *cname = object_class_get_name(oc);
AccelState *accel = ACCEL(object_new(cname));
int ret;
ms->accelerator = accel;
*(acc->allowed) = true;
ret = acc->init_machine(ms);
if (ret < 0) {
ms->accelerator = NULL;
*(acc->allowed) = false;
object_unref(OBJECT(accel));
}
return ret;
}
void configure_accelerator(MachineState *ms, const char *progname)
{
const char *accel;
char **accel_list, **tmp;
int ret;
bool accel_initialised = false;
bool init_failed = false;
AccelClass *acc = NULL;
accel = qemu_opt_get(qemu_get_machine_opts(), "accel");
if (accel == NULL) {
/* Select the default accelerator */
int pnlen = strlen(progname);
if (pnlen >= 3 && g_str_equal(&progname[pnlen - 3], "kvm")) {
/* If the program name ends with "kvm", we prefer KVM */
accel = "kvm:tcg";
} else {
#if defined(CONFIG_TCG)
accel = "tcg";
#elif defined(CONFIG_KVM)
accel = "kvm";
#else
#error "No default accelerator available"
#endif
}
}
accel_list = g_strsplit(accel, ":", 0);
for (tmp = accel_list; !accel_initialised && tmp && *tmp; tmp++) {
acc = accel_find(*tmp);
if (!acc) {
continue;
}
if (acc->available && !acc->available()) {
printf("%s not supported for this target\n",
acc->name);
continue;
}
ret = accel_init_machine(acc, ms);
if (ret < 0) {
init_failed = true;
error_report("failed to initialize %s: %s",
acc->name, strerror(-ret));
} else {
accel_initialised = true;
}
}
g_strfreev(accel_list);
if (!accel_initialised) {
if (!init_failed) {
error_report("-machine accel=%s: No accelerator found", accel);
}
exit(1);
}
if (init_failed) {
error_report("Back to %s accelerator", acc->name);
}
}
void accel_setup_post(MachineState *ms)
{
AccelState *accel = ms->accelerator;
AccelClass *acc = ACCEL_GET_CLASS(accel);
if (acc->setup_post) {
acc->setup_post(ms, accel);
}
}
static void register_accel_types(void)
{
type_register_static(&accel_type);
}
type_init(register_accel_types);

View File

@@ -1,2 +0,0 @@
obj-y += kvm-all.o
obj-$(call lnot,$(CONFIG_SEV)) += sev-stub.o

File diff suppressed because it is too large Load Diff

View File

@@ -1,26 +0,0 @@
/*
* QEMU SEV stub
*
* Copyright Advanced Micro Devices 2018
*
* Authors:
* Brijesh Singh <brijesh.singh@amd.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "sysemu/sev.h"
int sev_encrypt_data(void *handle, uint8_t *ptr, uint64_t len)
{
abort();
}
void *sev_guest_init(const char *id)
{
return NULL;
}

View File

@@ -1,18 +0,0 @@
# Trace events for debugging and performance instrumentation
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
kvm_vm_ioctl(int type, void *arg) "type 0x%x, arg %p"
kvm_vcpu_ioctl(int cpu_index, int type, void *arg) "cpu_index %d, type 0x%x, arg %p"
kvm_run_exit(int cpu_index, uint32_t reason) "cpu_index %d, reason %d"
kvm_device_ioctl(int fd, int type, void *arg) "dev fd %d, type 0x%x, arg %p"
kvm_failed_reg_get(uint64_t id, const char *msg) "Warning: Unable to retrieve ONEREG %" PRIu64 " from KVM: %s"
kvm_failed_reg_set(uint64_t id, const char *msg) "Warning: Unable to set ONEREG %" PRIu64 " to KVM: %s"
kvm_irqchip_commit_routes(void) ""
kvm_irqchip_add_msi_route(char *name, int vector, int virq) "dev %s vector %d virq %d"
kvm_irqchip_update_msi_route(int virq) "Updating MSI route virq=%d"
kvm_irqchip_release_virq(int virq) "virq %d"
kvm_set_ioeventfd_mmio(int fd, uint64_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%" PRIx64 " val=0x%x assign: %d size: %d match: %d"
kvm_set_ioeventfd_pio(int fd, uint16_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%x val=0x%x assign: %d size: %d match: %d"
kvm_set_user_memory(uint32_t slot, uint32_t flags, uint64_t guest_phys_addr, uint64_t memory_size, uint64_t userspace_addr, int ret) "Slot#%d flags=0x%x gpa=0x%"PRIx64 " size=0x%"PRIx64 " ua=0x%"PRIx64 " ret=%d"

View File

@@ -1,5 +0,0 @@
obj-$(call lnot,$(CONFIG_HAX)) += hax-stub.o
obj-$(call lnot,$(CONFIG_HVF)) += hvf-stub.o
obj-$(call lnot,$(CONFIG_WHPX)) += whpx-stub.o
obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
obj-$(call lnot,$(CONFIG_TCG)) += tcg-stub.o

View File

@@ -1,34 +0,0 @@
/*
* QEMU HAXM support
*
* Copyright (c) 2015, Intel Corporation
*
* Copyright 2016 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "sysemu/hax.h"
int hax_sync_vcpus(void)
{
return 0;
}
int hax_init_vcpu(CPUState *cpu)
{
return -ENOSYS;
}
int hax_smp_cpu_exec(CPUState *cpu)
{
return -ENOSYS;
}

View File

@@ -1,31 +0,0 @@
/*
* QEMU HVF support
*
* Copyright 2017 Red Hat, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2 or later, as published by the Free Software Foundation,
* and may be copied, distributed, and modified under those terms.
*
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "sysemu/hvf.h"
int hvf_init_vcpu(CPUState *cpu)
{
return -ENOSYS;
}
int hvf_vcpu_exec(CPUState *cpu)
{
return -ENOSYS;
}
void hvf_vcpu_destroy(CPUState *cpu)
{
}

View File

@@ -1,177 +0,0 @@
/*
* QEMU KVM stub
*
* Copyright Red Hat, Inc. 2010
*
* Author: Paolo Bonzini <pbonzini@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "sysemu/kvm.h"
#ifndef CONFIG_USER_ONLY
#include "hw/pci/msi.h"
#endif
KVMState *kvm_state;
bool kvm_kernel_irqchip;
bool kvm_async_interrupts_allowed;
bool kvm_eventfds_allowed;
bool kvm_irqfds_allowed;
bool kvm_resamplefds_allowed;
bool kvm_msi_via_irqfd_allowed;
bool kvm_gsi_routing_allowed;
bool kvm_gsi_direct_mapping;
bool kvm_allowed;
bool kvm_readonly_mem_allowed;
bool kvm_ioeventfd_any_length_allowed;
bool kvm_msi_use_devid;
int kvm_destroy_vcpu(CPUState *cpu)
{
return -ENOSYS;
}
int kvm_init_vcpu(CPUState *cpu)
{
return -ENOSYS;
}
void kvm_flush_coalesced_mmio_buffer(void)
{
}
void kvm_cpu_synchronize_state(CPUState *cpu)
{
}
void kvm_cpu_synchronize_post_reset(CPUState *cpu)
{
}
void kvm_cpu_synchronize_post_init(CPUState *cpu)
{
}
int kvm_cpu_exec(CPUState *cpu)
{
abort();
}
bool kvm_has_sync_mmu(void)
{
return false;
}
int kvm_has_many_ioeventfds(void)
{
return 0;
}
int kvm_update_guest_debug(CPUState *cpu, unsigned long reinject_trap)
{
return -ENOSYS;
}
void kvm_set_singlestep(CPUState *cs, int enabled)
{
}
int kvm_insert_breakpoint(CPUState *cpu, target_ulong addr,
target_ulong len, int type)
{
return -EINVAL;
}
int kvm_remove_breakpoint(CPUState *cpu, target_ulong addr,
target_ulong len, int type)
{
return -EINVAL;
}
void kvm_remove_all_breakpoints(CPUState *cpu)
{
}
int kvm_on_sigbus_vcpu(CPUState *cpu, int code, void *addr)
{
return 1;
}
int kvm_on_sigbus(int code, void *addr)
{
return 1;
}
bool kvm_memcrypt_enabled(void)
{
return false;
}
int kvm_memcrypt_encrypt_data(uint8_t *ptr, uint64_t len)
{
return 1;
}
#ifndef CONFIG_USER_ONLY
int kvm_irqchip_add_msi_route(KVMState *s, int vector, PCIDevice *dev)
{
return -ENOSYS;
}
void kvm_init_irq_routing(KVMState *s)
{
}
void kvm_irqchip_release_virq(KVMState *s, int virq)
{
}
int kvm_irqchip_update_msi_route(KVMState *s, int virq, MSIMessage msg,
PCIDevice *dev)
{
return -ENOSYS;
}
void kvm_irqchip_commit_routes(KVMState *s)
{
}
int kvm_irqchip_add_adapter_route(KVMState *s, AdapterInfo *adapter)
{
return -ENOSYS;
}
int kvm_irqchip_add_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
EventNotifier *rn, int virq)
{
return -ENOSYS;
}
int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
int virq)
{
return -ENOSYS;
}
bool kvm_has_free_slot(MachineState *ms)
{
return false;
}
void kvm_init_cpu_signals(CPUState *cpu)
{
abort();
}
bool kvm_arm_supports_user_irq(void)
{
return false;
}
#endif

View File

@@ -1,26 +0,0 @@
/*
* QEMU TCG accelerator stub
*
* Copyright Red Hat, Inc. 2013
*
* Author: Paolo Bonzini <pbonzini@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "tcg/tcg.h"
#include "exec/cpu-common.h"
#include "exec/exec-all.h"
void tb_flush(CPUState *cpu)
{
}
void tlb_set_dirty(CPUState *cpu, target_ulong vaddr)
{
}

View File

@@ -1,48 +0,0 @@
/*
* QEMU Windows Hypervisor Platform accelerator (WHPX) stub
*
* Copyright Microsoft Corp. 2017
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "sysemu/whpx.h"
int whpx_init_vcpu(CPUState *cpu)
{
return -1;
}
int whpx_vcpu_exec(CPUState *cpu)
{
return -1;
}
void whpx_destroy_vcpu(CPUState *cpu)
{
}
void whpx_vcpu_kick(CPUState *cpu)
{
}
void whpx_cpu_synchronize_state(CPUState *cpu)
{
}
void whpx_cpu_synchronize_post_reset(CPUState *cpu)
{
}
void whpx_cpu_synchronize_post_init(CPUState *cpu)
{
}
void whpx_cpu_synchronize_pre_loadvm(CPUState *cpu)
{
}

View File

@@ -1,8 +0,0 @@
obj-$(CONFIG_SOFTMMU) += tcg-all.o
obj-$(CONFIG_SOFTMMU) += cputlb.o
obj-y += tcg-runtime.o tcg-runtime-gvec.o
obj-y += cpu-exec.o cpu-exec-common.o translate-all.o
obj-y += translator.o
obj-$(CONFIG_USER_ONLY) += user-exec.o
obj-$(call lnot,$(CONFIG_SOFTMMU)) += user-exec-stub.o

View File

@@ -1,368 +0,0 @@
/*
* Atomic helper templates
* Included from tcg-runtime.c and cputlb.c.
*
* Copyright (c) 2016 Red Hat, Inc
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "trace/mem.h"
#if DATA_SIZE == 16
# define SUFFIX o
# define DATA_TYPE Int128
# define BSWAP bswap128
# define SHIFT 4
#elif DATA_SIZE == 8
# define SUFFIX q
# define DATA_TYPE uint64_t
# define SDATA_TYPE int64_t
# define BSWAP bswap64
# define SHIFT 3
#elif DATA_SIZE == 4
# define SUFFIX l
# define DATA_TYPE uint32_t
# define SDATA_TYPE int32_t
# define BSWAP bswap32
# define SHIFT 2
#elif DATA_SIZE == 2
# define SUFFIX w
# define DATA_TYPE uint16_t
# define SDATA_TYPE int16_t
# define BSWAP bswap16
# define SHIFT 1
#elif DATA_SIZE == 1
# define SUFFIX b
# define DATA_TYPE uint8_t
# define SDATA_TYPE int8_t
# define BSWAP
# define SHIFT 0
#else
# error unsupported data size
#endif
#if DATA_SIZE >= 4
# define ABI_TYPE DATA_TYPE
#else
# define ABI_TYPE uint32_t
#endif
#define ATOMIC_TRACE_RMW do { \
uint8_t info = glue(trace_mem_build_info_no_se, MEND)(SHIFT, false); \
\
trace_guest_mem_before_exec(ENV_GET_CPU(env), addr, info); \
trace_guest_mem_before_exec(ENV_GET_CPU(env), addr, \
info | TRACE_MEM_ST); \
} while (0)
#define ATOMIC_TRACE_LD do { \
uint8_t info = glue(trace_mem_build_info_no_se, MEND)(SHIFT, false); \
\
trace_guest_mem_before_exec(ENV_GET_CPU(env), addr, info); \
} while (0)
# define ATOMIC_TRACE_ST do { \
uint8_t info = glue(trace_mem_build_info_no_se, MEND)(SHIFT, true); \
\
trace_guest_mem_before_exec(ENV_GET_CPU(env), addr, info); \
} while (0)
/* Define host-endian atomic operations. Note that END is used within
the ATOMIC_NAME macro, and redefined below. */
#if DATA_SIZE == 1
# define END
# define MEND _be /* either le or be would be fine */
#elif defined(HOST_WORDS_BIGENDIAN)
# define END _be
# define MEND _be
#else
# define END _le
# define MEND _le
#endif
ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE cmpv, ABI_TYPE newv EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
ATOMIC_TRACE_RMW;
#if DATA_SIZE == 16
ret = atomic16_cmpxchg(haddr, cmpv, newv);
#else
ret = atomic_cmpxchg__nocheck(haddr, cmpv, newv);
#endif
ATOMIC_MMU_CLEANUP;
return ret;
}
#if DATA_SIZE >= 16
#if HAVE_ATOMIC128
ABI_TYPE ATOMIC_NAME(ld)(CPUArchState *env, target_ulong addr EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE val, *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_LD;
val = atomic16_read(haddr);
ATOMIC_MMU_CLEANUP;
return val;
}
void ATOMIC_NAME(st)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_ST;
atomic16_set(haddr, val);
ATOMIC_MMU_CLEANUP;
}
#endif
#else
ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
ATOMIC_TRACE_RMW;
ret = atomic_xchg__nocheck(haddr, val);
ATOMIC_MMU_CLEANUP;
return ret;
}
#define GEN_ATOMIC_HELPER(X) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE val EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
DATA_TYPE ret; \
\
ATOMIC_TRACE_RMW; \
ret = atomic_##X(haddr, val); \
ATOMIC_MMU_CLEANUP; \
return ret; \
}
GEN_ATOMIC_HELPER(fetch_add)
GEN_ATOMIC_HELPER(fetch_and)
GEN_ATOMIC_HELPER(fetch_or)
GEN_ATOMIC_HELPER(fetch_xor)
GEN_ATOMIC_HELPER(add_fetch)
GEN_ATOMIC_HELPER(and_fetch)
GEN_ATOMIC_HELPER(or_fetch)
GEN_ATOMIC_HELPER(xor_fetch)
#undef GEN_ATOMIC_HELPER
/* These helpers are, as a whole, full barriers. Within the helper,
* the leading barrier is explicit and the trailing barrier is within
* cmpxchg primitive.
*
* Trace this load + RMW loop as a single RMW op. This way, regardless
* of CF_PARALLEL's value, we'll trace just a read and a write.
*/
#define GEN_ATOMIC_HELPER_FN(X, FN, XDATA_TYPE, RET) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE xval EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
XDATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
XDATA_TYPE cmp, old, new, val = xval; \
\
ATOMIC_TRACE_RMW; \
smp_mb(); \
cmp = atomic_read__nocheck(haddr); \
do { \
old = cmp; new = FN(old, val); \
cmp = atomic_cmpxchg__nocheck(haddr, old, new); \
} while (cmp != old); \
ATOMIC_MMU_CLEANUP; \
return RET; \
}
GEN_ATOMIC_HELPER_FN(fetch_smin, MIN, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umin, MIN, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_smax, MAX, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umax, MAX, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(smin_fetch, MIN, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umin_fetch, MIN, DATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(smax_fetch, MAX, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umax_fetch, MAX, DATA_TYPE, new)
#undef GEN_ATOMIC_HELPER_FN
#endif /* DATA SIZE >= 16 */
#undef END
#undef MEND
#if DATA_SIZE > 1
/* Define reverse-host-endian atomic operations. Note that END is used
within the ATOMIC_NAME macro. */
#ifdef HOST_WORDS_BIGENDIAN
# define END _le
# define MEND _le
#else
# define END _be
# define MEND _be
#endif
ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE cmpv, ABI_TYPE newv EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
ATOMIC_TRACE_RMW;
#if DATA_SIZE == 16
ret = atomic16_cmpxchg(haddr, BSWAP(cmpv), BSWAP(newv));
#else
ret = atomic_cmpxchg__nocheck(haddr, BSWAP(cmpv), BSWAP(newv));
#endif
ATOMIC_MMU_CLEANUP;
return BSWAP(ret);
}
#if DATA_SIZE >= 16
#if HAVE_ATOMIC128
ABI_TYPE ATOMIC_NAME(ld)(CPUArchState *env, target_ulong addr EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE val, *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_LD;
val = atomic16_read(haddr);
ATOMIC_MMU_CLEANUP;
return BSWAP(val);
}
void ATOMIC_NAME(st)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_ST;
val = BSWAP(val);
atomic16_set(haddr, val);
ATOMIC_MMU_CLEANUP;
}
#endif
#else
ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
ABI_TYPE ret;
ATOMIC_TRACE_RMW;
ret = atomic_xchg__nocheck(haddr, BSWAP(val));
ATOMIC_MMU_CLEANUP;
return BSWAP(ret);
}
#define GEN_ATOMIC_HELPER(X) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE val EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
DATA_TYPE ret; \
\
ATOMIC_TRACE_RMW; \
ret = atomic_##X(haddr, BSWAP(val)); \
ATOMIC_MMU_CLEANUP; \
return BSWAP(ret); \
}
GEN_ATOMIC_HELPER(fetch_and)
GEN_ATOMIC_HELPER(fetch_or)
GEN_ATOMIC_HELPER(fetch_xor)
GEN_ATOMIC_HELPER(and_fetch)
GEN_ATOMIC_HELPER(or_fetch)
GEN_ATOMIC_HELPER(xor_fetch)
#undef GEN_ATOMIC_HELPER
/* These helpers are, as a whole, full barriers. Within the helper,
* the leading barrier is explicit and the trailing barrier is within
* cmpxchg primitive.
*
* Trace this load + RMW loop as a single RMW op. This way, regardless
* of CF_PARALLEL's value, we'll trace just a read and a write.
*/
#define GEN_ATOMIC_HELPER_FN(X, FN, XDATA_TYPE, RET) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE xval EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
XDATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
XDATA_TYPE ldo, ldn, old, new, val = xval; \
\
ATOMIC_TRACE_RMW; \
smp_mb(); \
ldn = atomic_read__nocheck(haddr); \
do { \
ldo = ldn; old = BSWAP(ldo); new = FN(old, val); \
ldn = atomic_cmpxchg__nocheck(haddr, ldo, BSWAP(new)); \
} while (ldo != ldn); \
ATOMIC_MMU_CLEANUP; \
return RET; \
}
GEN_ATOMIC_HELPER_FN(fetch_smin, MIN, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umin, MIN, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_smax, MAX, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umax, MAX, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(smin_fetch, MIN, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umin_fetch, MIN, DATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(smax_fetch, MAX, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umax_fetch, MAX, DATA_TYPE, new)
/* Note that for addition, we need to use a separate cmpxchg loop instead
of bswaps for the reverse-host-endian helpers. */
#define ADD(X, Y) (X + Y)
GEN_ATOMIC_HELPER_FN(fetch_add, ADD, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(add_fetch, ADD, DATA_TYPE, new)
#undef ADD
#undef GEN_ATOMIC_HELPER_FN
#endif /* DATA_SIZE >= 16 */
#undef END
#undef MEND
#endif /* DATA_SIZE > 1 */
#undef ATOMIC_TRACE_ST
#undef ATOMIC_TRACE_LD
#undef ATOMIC_TRACE_RMW
#undef BSWAP
#undef ABI_TYPE
#undef DATA_TYPE
#undef SDATA_TYPE
#undef SUFFIX
#undef DATA_SIZE
#undef SHIFT

View File

@@ -1,83 +0,0 @@
/*
* emulator main execution loop
*
* Copyright (c) 2003-2005 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "sysemu/cpus.h"
#include "exec/exec-all.h"
bool tcg_allowed;
/* exit the current TB, but without causing any exception to be raised */
void cpu_loop_exit_noexc(CPUState *cpu)
{
cpu->exception_index = -1;
cpu_loop_exit(cpu);
}
#if defined(CONFIG_SOFTMMU)
void cpu_reloading_memory_map(void)
{
if (qemu_in_vcpu_thread() && current_cpu->running) {
/* The guest can in theory prolong the RCU critical section as long
* as it feels like. The major problem with this is that because it
* can do multiple reconfigurations of the memory map within the
* critical section, we could potentially accumulate an unbounded
* collection of memory data structures awaiting reclamation.
*
* Because the only thing we're currently protecting with RCU is the
* memory data structures, it's sufficient to break the critical section
* in this callback, which we know will get called every time the
* memory map is rearranged.
*
* (If we add anything else in the system that uses RCU to protect
* its data structures, we will need to implement some other mechanism
* to force TCG CPUs to exit the critical section, at which point this
* part of this callback might become unnecessary.)
*
* This pair matches cpu_exec's rcu_read_lock()/rcu_read_unlock(), which
* only protects cpu->as->dispatch. Since we know our caller is about
* to reload it, it's safe to split the critical section.
*/
rcu_read_unlock();
rcu_read_lock();
}
}
#endif
void cpu_loop_exit(CPUState *cpu)
{
/* Undo the setting in cpu_tb_exec. */
cpu->can_do_io = 1;
siglongjmp(cpu->jmp_env, 1);
}
void cpu_loop_exit_restore(CPUState *cpu, uintptr_t pc)
{
if (pc) {
cpu_restore_state(cpu, pc, true);
}
cpu_loop_exit(cpu);
}
void cpu_loop_exit_atomic(CPUState *cpu, uintptr_t pc)
{
cpu->exception_index = EXCP_ATOMIC;
cpu_loop_exit_restore(cpu, pc);
}

View File

@@ -1,740 +0,0 @@
/*
* emulator main execution loop
*
* Copyright (c) 2003-2005 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "trace.h"
#include "disas/disas.h"
#include "exec/exec-all.h"
#include "tcg.h"
#include "qemu/atomic.h"
#include "sysemu/qtest.h"
#include "qemu/timer.h"
#include "qemu/rcu.h"
#include "exec/tb-hash.h"
#include "exec/tb-lookup.h"
#include "exec/log.h"
#include "qemu/main-loop.h"
#if defined(TARGET_I386) && !defined(CONFIG_USER_ONLY)
#include "hw/i386/apic.h"
#endif
#include "sysemu/cpus.h"
#include "sysemu/replay.h"
/* -icount align implementation. */
typedef struct SyncClocks {
int64_t diff_clk;
int64_t last_cpu_icount;
int64_t realtime_clock;
} SyncClocks;
#if !defined(CONFIG_USER_ONLY)
/* Allow the guest to have a max 3ms advance.
* The difference between the 2 clocks could therefore
* oscillate around 0.
*/
#define VM_CLOCK_ADVANCE 3000000
#define THRESHOLD_REDUCE 1.5
#define MAX_DELAY_PRINT_RATE 2000000000LL
#define MAX_NB_PRINTS 100
static void align_clocks(SyncClocks *sc, const CPUState *cpu)
{
int64_t cpu_icount;
if (!icount_align_option) {
return;
}
cpu_icount = cpu->icount_extra + cpu->icount_decr.u16.low;
sc->diff_clk += cpu_icount_to_ns(sc->last_cpu_icount - cpu_icount);
sc->last_cpu_icount = cpu_icount;
if (sc->diff_clk > VM_CLOCK_ADVANCE) {
#ifndef _WIN32
struct timespec sleep_delay, rem_delay;
sleep_delay.tv_sec = sc->diff_clk / 1000000000LL;
sleep_delay.tv_nsec = sc->diff_clk % 1000000000LL;
if (nanosleep(&sleep_delay, &rem_delay) < 0) {
sc->diff_clk = rem_delay.tv_sec * 1000000000LL + rem_delay.tv_nsec;
} else {
sc->diff_clk = 0;
}
#else
Sleep(sc->diff_clk / SCALE_MS);
sc->diff_clk = 0;
#endif
}
}
static void print_delay(const SyncClocks *sc)
{
static float threshold_delay;
static int64_t last_realtime_clock;
static int nb_prints;
if (icount_align_option &&
sc->realtime_clock - last_realtime_clock >= MAX_DELAY_PRINT_RATE &&
nb_prints < MAX_NB_PRINTS) {
if ((-sc->diff_clk / (float)1000000000LL > threshold_delay) ||
(-sc->diff_clk / (float)1000000000LL <
(threshold_delay - THRESHOLD_REDUCE))) {
threshold_delay = (-sc->diff_clk / 1000000000LL) + 1;
printf("Warning: The guest is now late by %.1f to %.1f seconds\n",
threshold_delay - 1,
threshold_delay);
nb_prints++;
last_realtime_clock = sc->realtime_clock;
}
}
}
static void init_delay_params(SyncClocks *sc,
const CPUState *cpu)
{
if (!icount_align_option) {
return;
}
sc->realtime_clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL_RT);
sc->diff_clk = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - sc->realtime_clock;
sc->last_cpu_icount = cpu->icount_extra + cpu->icount_decr.u16.low;
if (sc->diff_clk < max_delay) {
max_delay = sc->diff_clk;
}
if (sc->diff_clk > max_advance) {
max_advance = sc->diff_clk;
}
/* Print every 2s max if the guest is late. We limit the number
of printed messages to NB_PRINT_MAX(currently 100) */
print_delay(sc);
}
#else
static void align_clocks(SyncClocks *sc, const CPUState *cpu)
{
}
static void init_delay_params(SyncClocks *sc, const CPUState *cpu)
{
}
#endif /* CONFIG USER ONLY */
/* Execute a TB, and fix up the CPU state afterwards if necessary */
static inline tcg_target_ulong cpu_tb_exec(CPUState *cpu, TranslationBlock *itb)
{
CPUArchState *env = cpu->env_ptr;
uintptr_t ret;
TranslationBlock *last_tb;
int tb_exit;
uint8_t *tb_ptr = itb->tc.ptr;
qemu_log_mask_and_addr(CPU_LOG_EXEC, itb->pc,
"Trace %d: %p ["
TARGET_FMT_lx "/" TARGET_FMT_lx "/%#x] %s\n",
cpu->cpu_index, itb->tc.ptr,
itb->cs_base, itb->pc, itb->flags,
lookup_symbol(itb->pc));
#if defined(DEBUG_DISAS)
if (qemu_loglevel_mask(CPU_LOG_TB_CPU)
&& qemu_log_in_addr_range(itb->pc)) {
qemu_log_lock();
int flags = 0;
if (qemu_loglevel_mask(CPU_LOG_TB_FPU)) {
flags |= CPU_DUMP_FPU;
}
#if defined(TARGET_I386)
flags |= CPU_DUMP_CCOP;
#endif
log_cpu_state(cpu, flags);
qemu_log_unlock();
}
#endif /* DEBUG_DISAS */
cpu->can_do_io = !use_icount;
ret = tcg_qemu_tb_exec(env, tb_ptr);
cpu->can_do_io = 1;
last_tb = (TranslationBlock *)(ret & ~TB_EXIT_MASK);
tb_exit = ret & TB_EXIT_MASK;
trace_exec_tb_exit(last_tb, tb_exit);
if (tb_exit > TB_EXIT_IDX1) {
/* We didn't start executing this TB (eg because the instruction
* counter hit zero); we must restore the guest PC to the address
* of the start of the TB.
*/
CPUClass *cc = CPU_GET_CLASS(cpu);
qemu_log_mask_and_addr(CPU_LOG_EXEC, last_tb->pc,
"Stopped execution of TB chain before %p ["
TARGET_FMT_lx "] %s\n",
last_tb->tc.ptr, last_tb->pc,
lookup_symbol(last_tb->pc));
if (cc->synchronize_from_tb) {
cc->synchronize_from_tb(cpu, last_tb);
} else {
assert(cc->set_pc);
cc->set_pc(cpu, last_tb->pc);
}
}
return ret;
}
#ifndef CONFIG_USER_ONLY
/* Execute the code without caching the generated code. An interpreter
could be used if available. */
static void cpu_exec_nocache(CPUState *cpu, int max_cycles,
TranslationBlock *orig_tb, bool ignore_icount)
{
TranslationBlock *tb;
uint32_t cflags = curr_cflags() | CF_NOCACHE;
if (ignore_icount) {
cflags &= ~CF_USE_ICOUNT;
}
/* Should never happen.
We only end up here when an existing TB is too long. */
cflags |= MIN(max_cycles, CF_COUNT_MASK);
mmap_lock();
tb = tb_gen_code(cpu, orig_tb->pc, orig_tb->cs_base,
orig_tb->flags, cflags);
tb->orig_tb = orig_tb;
mmap_unlock();
/* execute the generated code */
trace_exec_tb_nocache(tb, tb->pc);
cpu_tb_exec(cpu, tb);
mmap_lock();
tb_phys_invalidate(tb, -1);
mmap_unlock();
tcg_tb_remove(tb);
}
#endif
void cpu_exec_step_atomic(CPUState *cpu)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
TranslationBlock *tb;
target_ulong cs_base, pc;
uint32_t flags;
uint32_t cflags = 1;
uint32_t cf_mask = cflags & CF_HASH_MASK;
/* volatile because we modify it between setjmp and longjmp */
volatile bool in_exclusive_region = false;
if (sigsetjmp(cpu->jmp_env, 0) == 0) {
tb = tb_lookup__cpu_state(cpu, &pc, &cs_base, &flags, cf_mask);
if (tb == NULL) {
mmap_lock();
tb = tb_gen_code(cpu, pc, cs_base, flags, cflags);
mmap_unlock();
}
start_exclusive();
/* Since we got here, we know that parallel_cpus must be true. */
parallel_cpus = false;
in_exclusive_region = true;
cc->cpu_exec_enter(cpu);
/* execute the generated code */
trace_exec_tb(tb, pc);
cpu_tb_exec(cpu, tb);
cc->cpu_exec_exit(cpu);
} else {
/*
* The mmap_lock is dropped by tb_gen_code if it runs out of
* memory.
*/
#ifndef CONFIG_SOFTMMU
tcg_debug_assert(!have_mmap_lock());
#endif
if (qemu_mutex_iothread_locked()) {
qemu_mutex_unlock_iothread();
}
assert_no_pages_locked();
}
if (in_exclusive_region) {
/* We might longjump out of either the codegen or the
* execution, so must make sure we only end the exclusive
* region if we started it.
*/
parallel_cpus = true;
end_exclusive();
}
}
struct tb_desc {
target_ulong pc;
target_ulong cs_base;
CPUArchState *env;
tb_page_addr_t phys_page1;
uint32_t flags;
uint32_t cf_mask;
uint32_t trace_vcpu_dstate;
};
static bool tb_lookup_cmp(const void *p, const void *d)
{
const TranslationBlock *tb = p;
const struct tb_desc *desc = d;
if (tb->pc == desc->pc &&
tb->page_addr[0] == desc->phys_page1 &&
tb->cs_base == desc->cs_base &&
tb->flags == desc->flags &&
tb->trace_vcpu_dstate == desc->trace_vcpu_dstate &&
(tb_cflags(tb) & (CF_HASH_MASK | CF_INVALID)) == desc->cf_mask) {
/* check next page if needed */
if (tb->page_addr[1] == -1) {
return true;
} else {
tb_page_addr_t phys_page2;
target_ulong virt_page2;
virt_page2 = (desc->pc & TARGET_PAGE_MASK) + TARGET_PAGE_SIZE;
phys_page2 = get_page_addr_code(desc->env, virt_page2);
if (tb->page_addr[1] == phys_page2) {
return true;
}
}
}
return false;
}
TranslationBlock *tb_htable_lookup(CPUState *cpu, target_ulong pc,
target_ulong cs_base, uint32_t flags,
uint32_t cf_mask)
{
tb_page_addr_t phys_pc;
struct tb_desc desc;
uint32_t h;
desc.env = (CPUArchState *)cpu->env_ptr;
desc.cs_base = cs_base;
desc.flags = flags;
desc.cf_mask = cf_mask;
desc.trace_vcpu_dstate = *cpu->trace_dstate;
desc.pc = pc;
phys_pc = get_page_addr_code(desc.env, pc);
if (phys_pc == -1) {
return NULL;
}
desc.phys_page1 = phys_pc & TARGET_PAGE_MASK;
h = tb_hash_func(phys_pc, pc, flags, cf_mask, *cpu->trace_dstate);
return qht_lookup_custom(&tb_ctx.htable, &desc, h, tb_lookup_cmp);
}
void tb_set_jmp_target(TranslationBlock *tb, int n, uintptr_t addr)
{
if (TCG_TARGET_HAS_direct_jump) {
uintptr_t offset = tb->jmp_target_arg[n];
uintptr_t tc_ptr = (uintptr_t)tb->tc.ptr;
tb_target_set_jmp_target(tc_ptr, tc_ptr + offset, addr);
} else {
tb->jmp_target_arg[n] = addr;
}
}
static inline void tb_add_jump(TranslationBlock *tb, int n,
TranslationBlock *tb_next)
{
uintptr_t old;
assert(n < ARRAY_SIZE(tb->jmp_list_next));
qemu_spin_lock(&tb_next->jmp_lock);
/* make sure the destination TB is valid */
if (tb_next->cflags & CF_INVALID) {
goto out_unlock_next;
}
/* Atomically claim the jump destination slot only if it was NULL */
old = atomic_cmpxchg(&tb->jmp_dest[n], (uintptr_t)NULL, (uintptr_t)tb_next);
if (old) {
goto out_unlock_next;
}
/* patch the native jump address */
tb_set_jmp_target(tb, n, (uintptr_t)tb_next->tc.ptr);
/* add in TB jmp list */
tb->jmp_list_next[n] = tb_next->jmp_list_head;
tb_next->jmp_list_head = (uintptr_t)tb | n;
qemu_spin_unlock(&tb_next->jmp_lock);
qemu_log_mask_and_addr(CPU_LOG_EXEC, tb->pc,
"Linking TBs %p [" TARGET_FMT_lx
"] index %d -> %p [" TARGET_FMT_lx "]\n",
tb->tc.ptr, tb->pc, n,
tb_next->tc.ptr, tb_next->pc);
return;
out_unlock_next:
qemu_spin_unlock(&tb_next->jmp_lock);
return;
}
static inline TranslationBlock *tb_find(CPUState *cpu,
TranslationBlock *last_tb,
int tb_exit, uint32_t cf_mask)
{
TranslationBlock *tb;
target_ulong cs_base, pc;
uint32_t flags;
tb = tb_lookup__cpu_state(cpu, &pc, &cs_base, &flags, cf_mask);
if (tb == NULL) {
mmap_lock();
tb = tb_gen_code(cpu, pc, cs_base, flags, cf_mask);
mmap_unlock();
/* We add the TB in the virtual pc hash table for the fast lookup */
atomic_set(&cpu->tb_jmp_cache[tb_jmp_cache_hash_func(pc)], tb);
}
#ifndef CONFIG_USER_ONLY
/* We don't take care of direct jumps when address mapping changes in
* system emulation. So it's not safe to make a direct jump to a TB
* spanning two pages because the mapping for the second page can change.
*/
if (tb->page_addr[1] != -1) {
last_tb = NULL;
}
#endif
/* See if we can patch the calling TB. */
if (last_tb) {
tb_add_jump(last_tb, tb_exit, tb);
}
return tb;
}
static inline bool cpu_handle_halt(CPUState *cpu)
{
if (cpu->halted) {
#if defined(TARGET_I386) && !defined(CONFIG_USER_ONLY)
if ((cpu->interrupt_request & CPU_INTERRUPT_POLL)
&& replay_interrupt()) {
X86CPU *x86_cpu = X86_CPU(cpu);
qemu_mutex_lock_iothread();
apic_poll_irq(x86_cpu->apic_state);
cpu_reset_interrupt(cpu, CPU_INTERRUPT_POLL);
qemu_mutex_unlock_iothread();
}
#endif
if (!cpu_has_work(cpu)) {
return true;
}
cpu->halted = 0;
}
return false;
}
static inline void cpu_handle_debug_exception(CPUState *cpu)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
CPUWatchpoint *wp;
if (!cpu->watchpoint_hit) {
QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {
wp->flags &= ~BP_WATCHPOINT_HIT;
}
}
cc->debug_excp_handler(cpu);
}
static inline bool cpu_handle_exception(CPUState *cpu, int *ret)
{
if (cpu->exception_index < 0) {
#ifndef CONFIG_USER_ONLY
if (replay_has_exception()
&& cpu->icount_decr.u16.low + cpu->icount_extra == 0) {
/* try to cause an exception pending in the log */
cpu_exec_nocache(cpu, 1, tb_find(cpu, NULL, 0, curr_cflags()), true);
}
#endif
if (cpu->exception_index < 0) {
return false;
}
}
if (cpu->exception_index >= EXCP_INTERRUPT) {
/* exit request from the cpu execution loop */
*ret = cpu->exception_index;
if (*ret == EXCP_DEBUG) {
cpu_handle_debug_exception(cpu);
}
cpu->exception_index = -1;
return true;
} else {
#if defined(CONFIG_USER_ONLY)
/* if user mode only, we simulate a fake exception
which will be handled outside the cpu execution
loop */
#if defined(TARGET_I386)
CPUClass *cc = CPU_GET_CLASS(cpu);
cc->do_interrupt(cpu);
#endif
*ret = cpu->exception_index;
cpu->exception_index = -1;
return true;
#else
if (replay_exception()) {
CPUClass *cc = CPU_GET_CLASS(cpu);
qemu_mutex_lock_iothread();
cc->do_interrupt(cpu);
qemu_mutex_unlock_iothread();
cpu->exception_index = -1;
} else if (!replay_has_interrupt()) {
/* give a chance to iothread in replay mode */
*ret = EXCP_INTERRUPT;
return true;
}
#endif
}
return false;
}
static inline bool cpu_handle_interrupt(CPUState *cpu,
TranslationBlock **last_tb)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
/* Clear the interrupt flag now since we're processing
* cpu->interrupt_request and cpu->exit_request.
* Ensure zeroing happens before reading cpu->exit_request or
* cpu->interrupt_request (see also smp_wmb in cpu_exit())
*/
atomic_mb_set(&cpu->icount_decr.u16.high, 0);
if (unlikely(atomic_read(&cpu->interrupt_request))) {
int interrupt_request;
qemu_mutex_lock_iothread();
interrupt_request = cpu->interrupt_request;
if (unlikely(cpu->singlestep_enabled & SSTEP_NOIRQ)) {
/* Mask out external interrupts for this step. */
interrupt_request &= ~CPU_INTERRUPT_SSTEP_MASK;
}
if (interrupt_request & CPU_INTERRUPT_DEBUG) {
cpu->interrupt_request &= ~CPU_INTERRUPT_DEBUG;
cpu->exception_index = EXCP_DEBUG;
qemu_mutex_unlock_iothread();
return true;
}
if (replay_mode == REPLAY_MODE_PLAY && !replay_has_interrupt()) {
/* Do nothing */
} else if (interrupt_request & CPU_INTERRUPT_HALT) {
replay_interrupt();
cpu->interrupt_request &= ~CPU_INTERRUPT_HALT;
cpu->halted = 1;
cpu->exception_index = EXCP_HLT;
qemu_mutex_unlock_iothread();
return true;
}
#if defined(TARGET_I386)
else if (interrupt_request & CPU_INTERRUPT_INIT) {
X86CPU *x86_cpu = X86_CPU(cpu);
CPUArchState *env = &x86_cpu->env;
replay_interrupt();
cpu_svm_check_intercept_param(env, SVM_EXIT_INIT, 0, 0);
do_cpu_init(x86_cpu);
cpu->exception_index = EXCP_HALTED;
qemu_mutex_unlock_iothread();
return true;
}
#else
else if (interrupt_request & CPU_INTERRUPT_RESET) {
replay_interrupt();
cpu_reset(cpu);
qemu_mutex_unlock_iothread();
return true;
}
#endif
/* The target hook has 3 exit conditions:
False when the interrupt isn't processed,
True when it is, and we should restart on a new TB,
and via longjmp via cpu_loop_exit. */
else {
if (cc->cpu_exec_interrupt(cpu, interrupt_request)) {
replay_interrupt();
cpu->exception_index = -1;
*last_tb = NULL;
}
/* The target hook may have updated the 'cpu->interrupt_request';
* reload the 'interrupt_request' value */
interrupt_request = cpu->interrupt_request;
}
if (interrupt_request & CPU_INTERRUPT_EXITTB) {
cpu->interrupt_request &= ~CPU_INTERRUPT_EXITTB;
/* ensure that no TB jump will be modified as
the program flow was changed */
*last_tb = NULL;
}
/* If we exit via cpu_loop_exit/longjmp it is reset in cpu_exec */
qemu_mutex_unlock_iothread();
}
/* Finally, check if we need to exit to the main loop. */
if (unlikely(atomic_read(&cpu->exit_request)
|| (use_icount && cpu->icount_decr.u16.low + cpu->icount_extra == 0))) {
atomic_set(&cpu->exit_request, 0);
if (cpu->exception_index == -1) {
cpu->exception_index = EXCP_INTERRUPT;
}
return true;
}
return false;
}
static inline void cpu_loop_exec_tb(CPUState *cpu, TranslationBlock *tb,
TranslationBlock **last_tb, int *tb_exit)
{
uintptr_t ret;
int32_t insns_left;
trace_exec_tb(tb, tb->pc);
ret = cpu_tb_exec(cpu, tb);
tb = (TranslationBlock *)(ret & ~TB_EXIT_MASK);
*tb_exit = ret & TB_EXIT_MASK;
if (*tb_exit != TB_EXIT_REQUESTED) {
*last_tb = tb;
return;
}
*last_tb = NULL;
insns_left = atomic_read(&cpu->icount_decr.u32);
if (insns_left < 0) {
/* Something asked us to stop executing chained TBs; just
* continue round the main loop. Whatever requested the exit
* will also have set something else (eg exit_request or
* interrupt_request) which will be handled by
* cpu_handle_interrupt. cpu_handle_interrupt will also
* clear cpu->icount_decr.u16.high.
*/
return;
}
/* Instruction counter expired. */
assert(use_icount);
#ifndef CONFIG_USER_ONLY
/* Ensure global icount has gone forward */
cpu_update_icount(cpu);
/* Refill decrementer and continue execution. */
insns_left = MIN(0xffff, cpu->icount_budget);
cpu->icount_decr.u16.low = insns_left;
cpu->icount_extra = cpu->icount_budget - insns_left;
if (!cpu->icount_extra) {
/* Execute any remaining instructions, then let the main loop
* handle the next event.
*/
if (insns_left > 0) {
cpu_exec_nocache(cpu, insns_left, tb, false);
}
}
#endif
}
/* main execution loop */
int cpu_exec(CPUState *cpu)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
int ret;
SyncClocks sc = { 0 };
/* replay_interrupt may need current_cpu */
current_cpu = cpu;
if (cpu_handle_halt(cpu)) {
return EXCP_HALTED;
}
rcu_read_lock();
cc->cpu_exec_enter(cpu);
/* Calculate difference between guest clock and host clock.
* This delay includes the delay of the last cycle, so
* what we have to do is sleep until it is 0. As for the
* advance/delay we gain here, we try to fix it next time.
*/
init_delay_params(&sc, cpu);
/* prepare setjmp context for exception handling */
if (sigsetjmp(cpu->jmp_env, 0) != 0) {
#if defined(__clang__) || !QEMU_GNUC_PREREQ(4, 6)
/* Some compilers wrongly smash all local variables after
* siglongjmp. There were bug reports for gcc 4.5.0 and clang.
* Reload essential local variables here for those compilers.
* Newer versions of gcc would complain about this code (-Wclobbered). */
cpu = current_cpu;
cc = CPU_GET_CLASS(cpu);
#else /* buggy compiler */
/* Assert that the compiler does not smash local variables. */
g_assert(cpu == current_cpu);
g_assert(cc == CPU_GET_CLASS(cpu));
#endif /* buggy compiler */
#ifndef CONFIG_SOFTMMU
tcg_debug_assert(!have_mmap_lock());
#endif
if (qemu_mutex_iothread_locked()) {
qemu_mutex_unlock_iothread();
}
assert_no_pages_locked();
}
/* if an exception is pending, we execute it here */
while (!cpu_handle_exception(cpu, &ret)) {
TranslationBlock *last_tb = NULL;
int tb_exit = 0;
while (!cpu_handle_interrupt(cpu, &last_tb)) {
uint32_t cflags = cpu->cflags_next_tb;
TranslationBlock *tb;
/* When requested, use an exact setting for cflags for the next
execution. This is used for icount, precise smc, and stop-
after-access watchpoints. Since this request should never
have CF_INVALID set, -1 is a convenient invalid value that
does not require tcg headers for cpu_common_reset. */
if (cflags == -1) {
cflags = curr_cflags();
} else {
cpu->cflags_next_tb = -1;
}
tb = tb_find(cpu, last_tb, tb_exit, cflags);
cpu_loop_exec_tb(cpu, tb, &last_tb, &tb_exit);
/* Try to align the host and virtual clocks
if the guest is in advance */
align_clocks(&sc, cpu);
}
}
cc->cpu_exec_exit(cpu);
rcu_read_unlock();
return ret;
}

File diff suppressed because it is too large Load Diff

View File

@@ -1,454 +0,0 @@
/*
* Software MMU support
*
* Generate helpers used by TCG for qemu_ld/st ops and code load
* functions.
*
* Included from target op helpers and exec.c.
*
* Copyright (c) 2003 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#if DATA_SIZE == 8
#define SUFFIX q
#define LSUFFIX q
#define SDATA_TYPE int64_t
#define DATA_TYPE uint64_t
#elif DATA_SIZE == 4
#define SUFFIX l
#define LSUFFIX l
#define SDATA_TYPE int32_t
#define DATA_TYPE uint32_t
#elif DATA_SIZE == 2
#define SUFFIX w
#define LSUFFIX uw
#define SDATA_TYPE int16_t
#define DATA_TYPE uint16_t
#elif DATA_SIZE == 1
#define SUFFIX b
#define LSUFFIX ub
#define SDATA_TYPE int8_t
#define DATA_TYPE uint8_t
#else
#error unsupported data size
#endif
/* For the benefit of TCG generated code, we want to avoid the complication
of ABI-specific return type promotion and always return a value extended
to the register size of the host. This is tcg_target_long, except in the
case of a 32-bit host and 64-bit data, and for that we always have
uint64_t. Don't bother with this widened value for SOFTMMU_CODE_ACCESS. */
#if defined(SOFTMMU_CODE_ACCESS) || DATA_SIZE == 8
# define WORD_TYPE DATA_TYPE
# define USUFFIX SUFFIX
#else
# define WORD_TYPE tcg_target_ulong
# define USUFFIX glue(u, SUFFIX)
# define SSUFFIX glue(s, SUFFIX)
#endif
#ifdef SOFTMMU_CODE_ACCESS
#define READ_ACCESS_TYPE MMU_INST_FETCH
#define ADDR_READ addr_code
#else
#define READ_ACCESS_TYPE MMU_DATA_LOAD
#define ADDR_READ addr_read
#endif
#if DATA_SIZE == 8
# define BSWAP(X) bswap64(X)
#elif DATA_SIZE == 4
# define BSWAP(X) bswap32(X)
#elif DATA_SIZE == 2
# define BSWAP(X) bswap16(X)
#else
# define BSWAP(X) (X)
#endif
#if DATA_SIZE == 1
# define helper_le_ld_name glue(glue(helper_ret_ld, USUFFIX), MMUSUFFIX)
# define helper_be_ld_name helper_le_ld_name
# define helper_le_lds_name glue(glue(helper_ret_ld, SSUFFIX), MMUSUFFIX)
# define helper_be_lds_name helper_le_lds_name
# define helper_le_st_name glue(glue(helper_ret_st, SUFFIX), MMUSUFFIX)
# define helper_be_st_name helper_le_st_name
#else
# define helper_le_ld_name glue(glue(helper_le_ld, USUFFIX), MMUSUFFIX)
# define helper_be_ld_name glue(glue(helper_be_ld, USUFFIX), MMUSUFFIX)
# define helper_le_lds_name glue(glue(helper_le_ld, SSUFFIX), MMUSUFFIX)
# define helper_be_lds_name glue(glue(helper_be_ld, SSUFFIX), MMUSUFFIX)
# define helper_le_st_name glue(glue(helper_le_st, SUFFIX), MMUSUFFIX)
# define helper_be_st_name glue(glue(helper_be_st, SUFFIX), MMUSUFFIX)
#endif
#ifndef SOFTMMU_CODE_ACCESS
static inline DATA_TYPE glue(io_read, SUFFIX)(CPUArchState *env,
size_t mmu_idx, size_t index,
target_ulong addr,
uintptr_t retaddr,
bool recheck,
MMUAccessType access_type)
{
CPUIOTLBEntry *iotlbentry = &env->iotlb[mmu_idx][index];
return io_readx(env, iotlbentry, mmu_idx, addr, retaddr, recheck,
access_type, DATA_SIZE);
}
#endif
WORD_TYPE helper_le_ld_name(CPUArchState *env, target_ulong addr,
TCGMemOpIdx oi, uintptr_t retaddr)
{
uintptr_t mmu_idx = get_mmuidx(oi);
uintptr_t index = tlb_index(env, mmu_idx, addr);
CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr);
target_ulong tlb_addr = entry->ADDR_READ;
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
DATA_TYPE res;
if (addr & ((1 << a_bits) - 1)) {
cpu_unaligned_access(ENV_GET_CPU(env), addr, READ_ACCESS_TYPE,
mmu_idx, retaddr);
}
/* If the TLB entry is for a different page, reload and try again. */
if (!tlb_hit(tlb_addr, addr)) {
if (!VICTIM_TLB_HIT(ADDR_READ, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, READ_ACCESS_TYPE,
mmu_idx, retaddr);
index = tlb_index(env, mmu_idx, addr);
entry = tlb_entry(env, mmu_idx, addr);
}
tlb_addr = entry->ADDR_READ;
}
/* Handle an IO access. */
if (unlikely(tlb_addr & ~TARGET_PAGE_MASK)) {
if ((addr & (DATA_SIZE - 1)) != 0) {
goto do_unaligned_access;
}
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
res = glue(io_read, SUFFIX)(env, mmu_idx, index, addr, retaddr,
tlb_addr & TLB_RECHECK,
READ_ACCESS_TYPE);
res = TGT_LE(res);
return res;
}
/* Handle slow unaligned access (it spans two pages or IO). */
if (DATA_SIZE > 1
&& unlikely((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1
>= TARGET_PAGE_SIZE)) {
target_ulong addr1, addr2;
DATA_TYPE res1, res2;
unsigned shift;
do_unaligned_access:
addr1 = addr & ~(DATA_SIZE - 1);
addr2 = addr1 + DATA_SIZE;
res1 = helper_le_ld_name(env, addr1, oi, retaddr);
res2 = helper_le_ld_name(env, addr2, oi, retaddr);
shift = (addr & (DATA_SIZE - 1)) * 8;
/* Little-endian combine. */
res = (res1 >> shift) | (res2 << ((DATA_SIZE * 8) - shift));
return res;
}
haddr = addr + entry->addend;
#if DATA_SIZE == 1
res = glue(glue(ld, LSUFFIX), _p)((uint8_t *)haddr);
#else
res = glue(glue(ld, LSUFFIX), _le_p)((uint8_t *)haddr);
#endif
return res;
}
#if DATA_SIZE > 1
WORD_TYPE helper_be_ld_name(CPUArchState *env, target_ulong addr,
TCGMemOpIdx oi, uintptr_t retaddr)
{
uintptr_t mmu_idx = get_mmuidx(oi);
uintptr_t index = tlb_index(env, mmu_idx, addr);
CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr);
target_ulong tlb_addr = entry->ADDR_READ;
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
DATA_TYPE res;
if (addr & ((1 << a_bits) - 1)) {
cpu_unaligned_access(ENV_GET_CPU(env), addr, READ_ACCESS_TYPE,
mmu_idx, retaddr);
}
/* If the TLB entry is for a different page, reload and try again. */
if (!tlb_hit(tlb_addr, addr)) {
if (!VICTIM_TLB_HIT(ADDR_READ, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, READ_ACCESS_TYPE,
mmu_idx, retaddr);
index = tlb_index(env, mmu_idx, addr);
entry = tlb_entry(env, mmu_idx, addr);
}
tlb_addr = entry->ADDR_READ;
}
/* Handle an IO access. */
if (unlikely(tlb_addr & ~TARGET_PAGE_MASK)) {
if ((addr & (DATA_SIZE - 1)) != 0) {
goto do_unaligned_access;
}
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
res = glue(io_read, SUFFIX)(env, mmu_idx, index, addr, retaddr,
tlb_addr & TLB_RECHECK,
READ_ACCESS_TYPE);
res = TGT_BE(res);
return res;
}
/* Handle slow unaligned access (it spans two pages or IO). */
if (DATA_SIZE > 1
&& unlikely((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1
>= TARGET_PAGE_SIZE)) {
target_ulong addr1, addr2;
DATA_TYPE res1, res2;
unsigned shift;
do_unaligned_access:
addr1 = addr & ~(DATA_SIZE - 1);
addr2 = addr1 + DATA_SIZE;
res1 = helper_be_ld_name(env, addr1, oi, retaddr);
res2 = helper_be_ld_name(env, addr2, oi, retaddr);
shift = (addr & (DATA_SIZE - 1)) * 8;
/* Big-endian combine. */
res = (res1 << shift) | (res2 >> ((DATA_SIZE * 8) - shift));
return res;
}
haddr = addr + entry->addend;
res = glue(glue(ld, LSUFFIX), _be_p)((uint8_t *)haddr);
return res;
}
#endif /* DATA_SIZE > 1 */
#ifndef SOFTMMU_CODE_ACCESS
/* Provide signed versions of the load routines as well. We can of course
avoid this for 64-bit data, or for 32-bit data on 32-bit host. */
#if DATA_SIZE * 8 < TCG_TARGET_REG_BITS
WORD_TYPE helper_le_lds_name(CPUArchState *env, target_ulong addr,
TCGMemOpIdx oi, uintptr_t retaddr)
{
return (SDATA_TYPE)helper_le_ld_name(env, addr, oi, retaddr);
}
# if DATA_SIZE > 1
WORD_TYPE helper_be_lds_name(CPUArchState *env, target_ulong addr,
TCGMemOpIdx oi, uintptr_t retaddr)
{
return (SDATA_TYPE)helper_be_ld_name(env, addr, oi, retaddr);
}
# endif
#endif
static inline void glue(io_write, SUFFIX)(CPUArchState *env,
size_t mmu_idx, size_t index,
DATA_TYPE val,
target_ulong addr,
uintptr_t retaddr,
bool recheck)
{
CPUIOTLBEntry *iotlbentry = &env->iotlb[mmu_idx][index];
return io_writex(env, iotlbentry, mmu_idx, val, addr, retaddr,
recheck, DATA_SIZE);
}
void helper_le_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
TCGMemOpIdx oi, uintptr_t retaddr)
{
uintptr_t mmu_idx = get_mmuidx(oi);
uintptr_t index = tlb_index(env, mmu_idx, addr);
CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr);
target_ulong tlb_addr = tlb_addr_write(entry);
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
if (addr & ((1 << a_bits) - 1)) {
cpu_unaligned_access(ENV_GET_CPU(env), addr, MMU_DATA_STORE,
mmu_idx, retaddr);
}
/* If the TLB entry is for a different page, reload and try again. */
if (!tlb_hit(tlb_addr, addr)) {
if (!VICTIM_TLB_HIT(addr_write, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
index = tlb_index(env, mmu_idx, addr);
entry = tlb_entry(env, mmu_idx, addr);
}
tlb_addr = tlb_addr_write(entry) & ~TLB_INVALID_MASK;
}
/* Handle an IO access. */
if (unlikely(tlb_addr & ~TARGET_PAGE_MASK)) {
if ((addr & (DATA_SIZE - 1)) != 0) {
goto do_unaligned_access;
}
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
val = TGT_LE(val);
glue(io_write, SUFFIX)(env, mmu_idx, index, val, addr,
retaddr, tlb_addr & TLB_RECHECK);
return;
}
/* Handle slow unaligned access (it spans two pages or IO). */
if (DATA_SIZE > 1
&& unlikely((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1
>= TARGET_PAGE_SIZE)) {
int i;
target_ulong page2;
CPUTLBEntry *entry2;
do_unaligned_access:
/* Ensure the second page is in the TLB. Note that the first page
is already guaranteed to be filled, and that the second page
cannot evict the first. */
page2 = (addr + DATA_SIZE) & TARGET_PAGE_MASK;
entry2 = tlb_entry(env, mmu_idx, page2);
if (!tlb_hit_page(tlb_addr_write(entry2), page2)
&& !VICTIM_TLB_HIT(addr_write, page2)) {
tlb_fill(ENV_GET_CPU(env), page2, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
}
/* XXX: not efficient, but simple. */
/* This loop must go in the forward direction to avoid issues
with self-modifying code in Windows 64-bit. */
for (i = 0; i < DATA_SIZE; ++i) {
/* Little-endian extract. */
uint8_t val8 = val >> (i * 8);
glue(helper_ret_stb, MMUSUFFIX)(env, addr + i, val8,
oi, retaddr);
}
return;
}
haddr = addr + entry->addend;
#if DATA_SIZE == 1
glue(glue(st, SUFFIX), _p)((uint8_t *)haddr, val);
#else
glue(glue(st, SUFFIX), _le_p)((uint8_t *)haddr, val);
#endif
}
#if DATA_SIZE > 1
void helper_be_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
TCGMemOpIdx oi, uintptr_t retaddr)
{
uintptr_t mmu_idx = get_mmuidx(oi);
uintptr_t index = tlb_index(env, mmu_idx, addr);
CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr);
target_ulong tlb_addr = tlb_addr_write(entry);
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
if (addr & ((1 << a_bits) - 1)) {
cpu_unaligned_access(ENV_GET_CPU(env), addr, MMU_DATA_STORE,
mmu_idx, retaddr);
}
/* If the TLB entry is for a different page, reload and try again. */
if (!tlb_hit(tlb_addr, addr)) {
if (!VICTIM_TLB_HIT(addr_write, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
index = tlb_index(env, mmu_idx, addr);
entry = tlb_entry(env, mmu_idx, addr);
}
tlb_addr = tlb_addr_write(entry) & ~TLB_INVALID_MASK;
}
/* Handle an IO access. */
if (unlikely(tlb_addr & ~TARGET_PAGE_MASK)) {
if ((addr & (DATA_SIZE - 1)) != 0) {
goto do_unaligned_access;
}
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
val = TGT_BE(val);
glue(io_write, SUFFIX)(env, mmu_idx, index, val, addr, retaddr,
tlb_addr & TLB_RECHECK);
return;
}
/* Handle slow unaligned access (it spans two pages or IO). */
if (DATA_SIZE > 1
&& unlikely((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1
>= TARGET_PAGE_SIZE)) {
int i;
target_ulong page2;
CPUTLBEntry *entry2;
do_unaligned_access:
/* Ensure the second page is in the TLB. Note that the first page
is already guaranteed to be filled, and that the second page
cannot evict the first. */
page2 = (addr + DATA_SIZE) & TARGET_PAGE_MASK;
entry2 = tlb_entry(env, mmu_idx, page2);
if (!tlb_hit_page(tlb_addr_write(entry2), page2)
&& !VICTIM_TLB_HIT(addr_write, page2)) {
tlb_fill(ENV_GET_CPU(env), page2, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
}
/* XXX: not efficient, but simple */
/* This loop must go in the forward direction to avoid issues
with self-modifying code. */
for (i = 0; i < DATA_SIZE; ++i) {
/* Big-endian extract. */
uint8_t val8 = val >> (((DATA_SIZE - 1) * 8) - (i * 8));
glue(helper_ret_stb, MMUSUFFIX)(env, addr + i, val8,
oi, retaddr);
}
return;
}
haddr = addr + entry->addend;
glue(glue(st, SUFFIX), _be_p)((uint8_t *)haddr, val);
}
#endif /* DATA_SIZE > 1 */
#endif /* !defined(SOFTMMU_CODE_ACCESS) */
#undef READ_ACCESS_TYPE
#undef DATA_TYPE
#undef SUFFIX
#undef LSUFFIX
#undef DATA_SIZE
#undef ADDR_READ
#undef WORD_TYPE
#undef SDATA_TYPE
#undef USUFFIX
#undef SSUFFIX
#undef BSWAP
#undef helper_le_ld_name
#undef helper_be_ld_name
#undef helper_le_lds_name
#undef helper_be_lds_name
#undef helper_le_st_name
#undef helper_be_st_name

View File

@@ -1,92 +0,0 @@
/*
* QEMU System Emulator, accelerator interfaces
*
* Copyright (c) 2003-2008 Fabrice Bellard
* Copyright (c) 2014 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "sysemu/accel.h"
#include "sysemu/sysemu.h"
#include "qom/object.h"
#include "qemu-common.h"
#include "qom/cpu.h"
#include "sysemu/cpus.h"
#include "qemu/main-loop.h"
unsigned long tcg_tb_size;
#ifndef CONFIG_USER_ONLY
/* mask must never be zero, except for A20 change call */
static void tcg_handle_interrupt(CPUState *cpu, int mask)
{
int old_mask;
g_assert(qemu_mutex_iothread_locked());
old_mask = cpu->interrupt_request;
cpu->interrupt_request |= mask;
/*
* If called from iothread context, wake the target cpu in
* case its halted.
*/
if (!qemu_cpu_is_self(cpu)) {
qemu_cpu_kick(cpu);
} else {
atomic_set(&cpu->icount_decr.u16.high, -1);
if (use_icount &&
!cpu->can_do_io
&& (mask & ~old_mask) != 0) {
cpu_abort(cpu, "Raised interrupt while not in I/O function");
}
}
}
#endif
static int tcg_init(MachineState *ms)
{
tcg_exec_init(tcg_tb_size * 1024 * 1024);
cpu_interrupt_handler = tcg_handle_interrupt;
return 0;
}
static void tcg_accel_class_init(ObjectClass *oc, void *data)
{
AccelClass *ac = ACCEL_CLASS(oc);
ac->name = "tcg";
ac->init_machine = tcg_init;
ac->allowed = &tcg_allowed;
}
#define TYPE_TCG_ACCEL ACCEL_CLASS_NAME("tcg")
static const TypeInfo tcg_accel_type = {
.name = TYPE_TCG_ACCEL,
.parent = TYPE_ACCEL,
.class_init = tcg_accel_class_init,
};
static void register_accel_types(void)
{
type_register_static(&tcg_accel_type);
}
type_init(register_accel_types);

File diff suppressed because it is too large Load Diff

View File

@@ -1,169 +0,0 @@
/*
* Tiny Code Generator for QEMU
*
* Copyright (c) 2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/host-utils.h"
#include "cpu.h"
#include "exec/helper-proto.h"
#include "exec/cpu_ldst.h"
#include "exec/exec-all.h"
#include "exec/tb-lookup.h"
#include "disas/disas.h"
#include "exec/log.h"
/* 32-bit helpers */
int32_t HELPER(div_i32)(int32_t arg1, int32_t arg2)
{
return arg1 / arg2;
}
int32_t HELPER(rem_i32)(int32_t arg1, int32_t arg2)
{
return arg1 % arg2;
}
uint32_t HELPER(divu_i32)(uint32_t arg1, uint32_t arg2)
{
return arg1 / arg2;
}
uint32_t HELPER(remu_i32)(uint32_t arg1, uint32_t arg2)
{
return arg1 % arg2;
}
/* 64-bit helpers */
uint64_t HELPER(shl_i64)(uint64_t arg1, uint64_t arg2)
{
return arg1 << arg2;
}
uint64_t HELPER(shr_i64)(uint64_t arg1, uint64_t arg2)
{
return arg1 >> arg2;
}
int64_t HELPER(sar_i64)(int64_t arg1, int64_t arg2)
{
return arg1 >> arg2;
}
int64_t HELPER(div_i64)(int64_t arg1, int64_t arg2)
{
return arg1 / arg2;
}
int64_t HELPER(rem_i64)(int64_t arg1, int64_t arg2)
{
return arg1 % arg2;
}
uint64_t HELPER(divu_i64)(uint64_t arg1, uint64_t arg2)
{
return arg1 / arg2;
}
uint64_t HELPER(remu_i64)(uint64_t arg1, uint64_t arg2)
{
return arg1 % arg2;
}
uint64_t HELPER(muluh_i64)(uint64_t arg1, uint64_t arg2)
{
uint64_t l, h;
mulu64(&l, &h, arg1, arg2);
return h;
}
int64_t HELPER(mulsh_i64)(int64_t arg1, int64_t arg2)
{
uint64_t l, h;
muls64(&l, &h, arg1, arg2);
return h;
}
uint32_t HELPER(clz_i32)(uint32_t arg, uint32_t zero_val)
{
return arg ? clz32(arg) : zero_val;
}
uint32_t HELPER(ctz_i32)(uint32_t arg, uint32_t zero_val)
{
return arg ? ctz32(arg) : zero_val;
}
uint64_t HELPER(clz_i64)(uint64_t arg, uint64_t zero_val)
{
return arg ? clz64(arg) : zero_val;
}
uint64_t HELPER(ctz_i64)(uint64_t arg, uint64_t zero_val)
{
return arg ? ctz64(arg) : zero_val;
}
uint32_t HELPER(clrsb_i32)(uint32_t arg)
{
return clrsb32(arg);
}
uint64_t HELPER(clrsb_i64)(uint64_t arg)
{
return clrsb64(arg);
}
uint32_t HELPER(ctpop_i32)(uint32_t arg)
{
return ctpop32(arg);
}
uint64_t HELPER(ctpop_i64)(uint64_t arg)
{
return ctpop64(arg);
}
void *HELPER(lookup_tb_ptr)(CPUArchState *env)
{
CPUState *cpu = ENV_GET_CPU(env);
TranslationBlock *tb;
target_ulong cs_base, pc;
uint32_t flags;
tb = tb_lookup__cpu_state(cpu, &pc, &cs_base, &flags, curr_cflags());
if (tb == NULL) {
return tcg_ctx->code_gen_epilogue;
}
qemu_log_mask_and_addr(CPU_LOG_EXEC, pc,
"Chain %d: %p ["
TARGET_FMT_lx "/" TARGET_FMT_lx "/%#x] %s\n",
cpu->cpu_index, tb->tc.ptr, cs_base, pc, flags,
lookup_symbol(pc));
return tb->tc.ptr;
}
void HELPER(exit_atomic)(CPUArchState *env)
{
cpu_loop_exit_atomic(ENV_GET_CPU(env), GETPC());
}

View File

@@ -1,285 +0,0 @@
DEF_HELPER_FLAGS_2(div_i32, TCG_CALL_NO_RWG_SE, s32, s32, s32)
DEF_HELPER_FLAGS_2(rem_i32, TCG_CALL_NO_RWG_SE, s32, s32, s32)
DEF_HELPER_FLAGS_2(divu_i32, TCG_CALL_NO_RWG_SE, i32, i32, i32)
DEF_HELPER_FLAGS_2(remu_i32, TCG_CALL_NO_RWG_SE, i32, i32, i32)
DEF_HELPER_FLAGS_2(div_i64, TCG_CALL_NO_RWG_SE, s64, s64, s64)
DEF_HELPER_FLAGS_2(rem_i64, TCG_CALL_NO_RWG_SE, s64, s64, s64)
DEF_HELPER_FLAGS_2(divu_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(remu_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(shl_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(shr_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(sar_i64, TCG_CALL_NO_RWG_SE, s64, s64, s64)
DEF_HELPER_FLAGS_2(mulsh_i64, TCG_CALL_NO_RWG_SE, s64, s64, s64)
DEF_HELPER_FLAGS_2(muluh_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(clz_i32, TCG_CALL_NO_RWG_SE, i32, i32, i32)
DEF_HELPER_FLAGS_2(ctz_i32, TCG_CALL_NO_RWG_SE, i32, i32, i32)
DEF_HELPER_FLAGS_2(clz_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_2(ctz_i64, TCG_CALL_NO_RWG_SE, i64, i64, i64)
DEF_HELPER_FLAGS_1(clrsb_i32, TCG_CALL_NO_RWG_SE, i32, i32)
DEF_HELPER_FLAGS_1(clrsb_i64, TCG_CALL_NO_RWG_SE, i64, i64)
DEF_HELPER_FLAGS_1(ctpop_i32, TCG_CALL_NO_RWG_SE, i32, i32)
DEF_HELPER_FLAGS_1(ctpop_i64, TCG_CALL_NO_RWG_SE, i64, i64)
DEF_HELPER_FLAGS_1(lookup_tb_ptr, TCG_CALL_NO_WG_SE, ptr, env)
DEF_HELPER_FLAGS_1(exit_atomic, TCG_CALL_NO_WG, noreturn, env)
#ifdef CONFIG_SOFTMMU
DEF_HELPER_FLAGS_5(atomic_cmpxchgb, TCG_CALL_NO_WG,
i32, env, tl, i32, i32, i32)
DEF_HELPER_FLAGS_5(atomic_cmpxchgw_be, TCG_CALL_NO_WG,
i32, env, tl, i32, i32, i32)
DEF_HELPER_FLAGS_5(atomic_cmpxchgw_le, TCG_CALL_NO_WG,
i32, env, tl, i32, i32, i32)
DEF_HELPER_FLAGS_5(atomic_cmpxchgl_be, TCG_CALL_NO_WG,
i32, env, tl, i32, i32, i32)
DEF_HELPER_FLAGS_5(atomic_cmpxchgl_le, TCG_CALL_NO_WG,
i32, env, tl, i32, i32, i32)
#ifdef CONFIG_ATOMIC64
DEF_HELPER_FLAGS_5(atomic_cmpxchgq_be, TCG_CALL_NO_WG,
i64, env, tl, i64, i64, i32)
DEF_HELPER_FLAGS_5(atomic_cmpxchgq_le, TCG_CALL_NO_WG,
i64, env, tl, i64, i64, i32)
#endif
#ifdef CONFIG_ATOMIC64
#define GEN_ATOMIC_HELPERS(NAME) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), b), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), w_le), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), w_be), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), l_le), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), l_be), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), q_le), \
TCG_CALL_NO_WG, i64, env, tl, i64, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), q_be), \
TCG_CALL_NO_WG, i64, env, tl, i64, i32)
#else
#define GEN_ATOMIC_HELPERS(NAME) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), b), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), w_le), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), w_be), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), l_le), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32) \
DEF_HELPER_FLAGS_4(glue(glue(atomic_, NAME), l_be), \
TCG_CALL_NO_WG, i32, env, tl, i32, i32)
#endif /* CONFIG_ATOMIC64 */
#else
DEF_HELPER_FLAGS_4(atomic_cmpxchgb, TCG_CALL_NO_WG, i32, env, tl, i32, i32)
DEF_HELPER_FLAGS_4(atomic_cmpxchgw_be, TCG_CALL_NO_WG, i32, env, tl, i32, i32)
DEF_HELPER_FLAGS_4(atomic_cmpxchgw_le, TCG_CALL_NO_WG, i32, env, tl, i32, i32)
DEF_HELPER_FLAGS_4(atomic_cmpxchgl_be, TCG_CALL_NO_WG, i32, env, tl, i32, i32)
DEF_HELPER_FLAGS_4(atomic_cmpxchgl_le, TCG_CALL_NO_WG, i32, env, tl, i32, i32)
#ifdef CONFIG_ATOMIC64
DEF_HELPER_FLAGS_4(atomic_cmpxchgq_be, TCG_CALL_NO_WG, i64, env, tl, i64, i64)
DEF_HELPER_FLAGS_4(atomic_cmpxchgq_le, TCG_CALL_NO_WG, i64, env, tl, i64, i64)
#endif
#ifdef CONFIG_ATOMIC64
#define GEN_ATOMIC_HELPERS(NAME) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), b), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), w_le), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), w_be), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), l_le), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), l_be), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), q_le), \
TCG_CALL_NO_WG, i64, env, tl, i64) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), q_be), \
TCG_CALL_NO_WG, i64, env, tl, i64)
#else
#define GEN_ATOMIC_HELPERS(NAME) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), b), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), w_le), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), w_be), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), l_le), \
TCG_CALL_NO_WG, i32, env, tl, i32) \
DEF_HELPER_FLAGS_3(glue(glue(atomic_, NAME), l_be), \
TCG_CALL_NO_WG, i32, env, tl, i32)
#endif /* CONFIG_ATOMIC64 */
#endif /* CONFIG_SOFTMMU */
GEN_ATOMIC_HELPERS(fetch_add)
GEN_ATOMIC_HELPERS(fetch_and)
GEN_ATOMIC_HELPERS(fetch_or)
GEN_ATOMIC_HELPERS(fetch_xor)
GEN_ATOMIC_HELPERS(fetch_smin)
GEN_ATOMIC_HELPERS(fetch_umin)
GEN_ATOMIC_HELPERS(fetch_smax)
GEN_ATOMIC_HELPERS(fetch_umax)
GEN_ATOMIC_HELPERS(add_fetch)
GEN_ATOMIC_HELPERS(and_fetch)
GEN_ATOMIC_HELPERS(or_fetch)
GEN_ATOMIC_HELPERS(xor_fetch)
GEN_ATOMIC_HELPERS(smin_fetch)
GEN_ATOMIC_HELPERS(umin_fetch)
GEN_ATOMIC_HELPERS(smax_fetch)
GEN_ATOMIC_HELPERS(umax_fetch)
GEN_ATOMIC_HELPERS(xchg)
#undef GEN_ATOMIC_HELPERS
DEF_HELPER_FLAGS_3(gvec_mov, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_dup8, TCG_CALL_NO_RWG, void, ptr, i32, i32)
DEF_HELPER_FLAGS_3(gvec_dup16, TCG_CALL_NO_RWG, void, ptr, i32, i32)
DEF_HELPER_FLAGS_3(gvec_dup32, TCG_CALL_NO_RWG, void, ptr, i32, i32)
DEF_HELPER_FLAGS_3(gvec_dup64, TCG_CALL_NO_RWG, void, ptr, i32, i64)
DEF_HELPER_FLAGS_4(gvec_add8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_add16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_add32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_add64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_adds8, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_adds16, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_adds32, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_adds64, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_sub8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sub16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sub32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sub64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_subs8, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_subs16, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_subs32, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_subs64, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_mul8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_mul16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_mul32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_mul64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_muls8, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_muls16, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_muls32, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_muls64, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_ssadd8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ssadd16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ssadd32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ssadd64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sssub8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sssub16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sssub32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sssub64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_usadd8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_usadd16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_usadd32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_usadd64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg8, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg16, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg32, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg64, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_not, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_and, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_or, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_xor, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_andc, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_orc, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_nand, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_nor, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eqv, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ands, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_xors, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_ors, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_3(gvec_shl8i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shl16i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shl32i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shl64i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shr8i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shr16i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shr32i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_shr64i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_sar8i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_sar16i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_sar32i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_sar64i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ne8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ne16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ne32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ne64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_lt8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_lt16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_lt32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_lt64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_le8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_le16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_le32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_le64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ltu8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ltu16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ltu32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ltu64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)

View File

@@ -1,10 +0,0 @@
# Trace events for debugging and performance instrumentation
# TCG related tracing (mostly disabled by default)
# cpu-exec.c
disable exec_tb(void *tb, uintptr_t pc) "tb:%p pc=0x%"PRIxPTR
disable exec_tb_nocache(void *tb, uintptr_t pc) "tb:%p pc=0x%"PRIxPTR
disable exec_tb_exit(void *last_tb, unsigned int flags) "tb:%p flags=0x%x"
# translate-all.c
translate_block(void *tb, uintptr_t pc, uint8_t *tb_code) "tb:%p, pc:0x%"PRIxPTR", tb_code:%p"

File diff suppressed because it is too large Load Diff

View File

@@ -1,39 +0,0 @@
/*
* Translated block handling
*
* Copyright (c) 2003 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef TRANSLATE_ALL_H
#define TRANSLATE_ALL_H
#include "exec/exec-all.h"
/* translate-all.c */
struct page_collection *page_collection_lock(tb_page_addr_t start,
tb_page_addr_t end);
void page_collection_unlock(struct page_collection *set);
void tb_invalidate_phys_page_fast(struct page_collection *pages,
tb_page_addr_t start, int len);
void tb_invalidate_phys_page_range(tb_page_addr_t start, tb_page_addr_t end,
int is_cpu_write_access);
void tb_check_watchpoint(CPUState *cpu);
#ifdef CONFIG_USER_ONLY
int page_unprotect(target_ulong address, uintptr_t pc);
#endif
#endif /* TRANSLATE_ALL_H */

View File

@@ -1,141 +0,0 @@
/*
* Generic intermediate code generation.
*
* Copyright (C) 2016-2017 Lluís Vilanova <vilanova@ac.upc.edu>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/error-report.h"
#include "cpu.h"
#include "tcg/tcg.h"
#include "tcg/tcg-op.h"
#include "exec/exec-all.h"
#include "exec/gen-icount.h"
#include "exec/log.h"
#include "exec/translator.h"
/* Pairs with tcg_clear_temp_count.
To be called by #TranslatorOps.{translate_insn,tb_stop} if
(1) the target is sufficiently clean to support reporting,
(2) as and when all temporaries are known to be consumed.
For most targets, (2) is at the end of translate_insn. */
void translator_loop_temp_check(DisasContextBase *db)
{
if (tcg_check_temp_count()) {
qemu_log("warning: TCG temporary leaks before "
TARGET_FMT_lx "\n", db->pc_next);
}
}
void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
CPUState *cpu, TranslationBlock *tb)
{
int bp_insn = 0;
/* Initialize DisasContext */
db->tb = tb;
db->pc_first = tb->pc;
db->pc_next = db->pc_first;
db->is_jmp = DISAS_NEXT;
db->num_insns = 0;
db->singlestep_enabled = cpu->singlestep_enabled;
/* Instruction counting */
db->max_insns = tb_cflags(db->tb) & CF_COUNT_MASK;
if (db->max_insns == 0) {
db->max_insns = CF_COUNT_MASK;
}
if (db->max_insns > TCG_MAX_INSNS) {
db->max_insns = TCG_MAX_INSNS;
}
if (db->singlestep_enabled || singlestep) {
db->max_insns = 1;
}
ops->init_disas_context(db, cpu);
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
/* Reset the temp count so that we can identify leaks */
tcg_clear_temp_count();
/* Start translating. */
gen_tb_start(db->tb);
ops->tb_start(db, cpu);
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
while (true) {
db->num_insns++;
ops->insn_start(db, cpu);
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
/* Pass breakpoint hits to target for further processing */
if (!db->singlestep_enabled
&& unlikely(!QTAILQ_EMPTY(&cpu->breakpoints))) {
CPUBreakpoint *bp;
QTAILQ_FOREACH(bp, &cpu->breakpoints, entry) {
if (bp->pc == db->pc_next) {
if (ops->breakpoint_check(db, cpu, bp)) {
bp_insn = 1;
break;
}
}
}
/* The breakpoint_check hook may use DISAS_TOO_MANY to indicate
that only one more instruction is to be executed. Otherwise
it should use DISAS_NORETURN when generating an exception,
but may use a DISAS_TARGET_* value for Something Else. */
if (db->is_jmp > DISAS_TOO_MANY) {
break;
}
}
/* Disassemble one instruction. The translate_insn hook should
update db->pc_next and db->is_jmp to indicate what should be
done next -- either exiting this loop or locate the start of
the next instruction. */
if (db->num_insns == db->max_insns
&& (tb_cflags(db->tb) & CF_LAST_IO)) {
/* Accept I/O on the last instruction. */
gen_io_start();
ops->translate_insn(db, cpu);
gen_io_end();
} else {
ops->translate_insn(db, cpu);
}
/* Stop translation if translate_insn so indicated. */
if (db->is_jmp != DISAS_NEXT) {
break;
}
/* Stop translation if the output buffer is full,
or we have executed all of the allowed instructions. */
if (tcg_op_buf_full() || db->num_insns >= db->max_insns) {
db->is_jmp = DISAS_TOO_MANY;
break;
}
}
/* Emit code to exit the TB, as indicated by db->is_jmp. */
ops->tb_stop(db, cpu);
gen_tb_end(db->tb, db->num_insns - bp_insn);
/* The disas_log hook may use these values rather than recompute. */
db->tb->size = db->pc_next - db->pc_first;
db->tb->icount = db->num_insns;
#ifdef DEBUG_DISAS
if (qemu_loglevel_mask(CPU_LOG_TB_IN_ASM)
&& qemu_log_in_addr_range(db->pc_first)) {
qemu_log_lock();
qemu_log("----------------\n");
ops->disas_log(db, cpu);
qemu_log("\n");
qemu_log_unlock();
}
#endif
}

View File

@@ -1,37 +0,0 @@
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qom/cpu.h"
#include "sysemu/replay.h"
#include "sysemu/sysemu.h"
bool enable_cpu_pm = false;
void cpu_resume(CPUState *cpu)
{
}
void qemu_init_vcpu(CPUState *cpu)
{
}
/* User mode emulation does not support record/replay yet. */
bool replay_exception(void)
{
return true;
}
bool replay_has_exception(void)
{
return false;
}
bool replay_interrupt(void)
{
return true;
}
bool replay_has_interrupt(void)
{
return false;
}

View File

@@ -1,745 +0,0 @@
/*
* User emulator execution
*
* Copyright (c) 2003-2005 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "disas/disas.h"
#include "exec/exec-all.h"
#include "tcg.h"
#include "qemu/bitops.h"
#include "exec/cpu_ldst.h"
#include "translate-all.h"
#include "exec/helper-proto.h"
#include "qemu/atomic128.h"
#undef EAX
#undef ECX
#undef EDX
#undef EBX
#undef ESP
#undef EBP
#undef ESI
#undef EDI
#undef EIP
#ifdef __linux__
#include <sys/ucontext.h>
#endif
__thread uintptr_t helper_retaddr;
//#define DEBUG_SIGNAL
/* exit the current TB from a signal handler. The host registers are
restored in a state compatible with the CPU emulator
*/
static void cpu_exit_tb_from_sighandler(CPUState *cpu, sigset_t *old_set)
{
/* XXX: use siglongjmp ? */
sigprocmask(SIG_SETMASK, old_set, NULL);
cpu_loop_exit_noexc(cpu);
}
/* 'pc' is the host PC at which the exception was raised. 'address' is
the effective address of the memory exception. 'is_write' is 1 if a
write caused the exception and otherwise 0'. 'old_set' is the
signal set which should be restored */
static inline int handle_cpu_signal(uintptr_t pc, siginfo_t *info,
int is_write, sigset_t *old_set)
{
CPUState *cpu = current_cpu;
CPUClass *cc;
int ret;
unsigned long address = (unsigned long)info->si_addr;
/* We must handle PC addresses from two different sources:
* a call return address and a signal frame address.
*
* Within cpu_restore_state_from_tb we assume the former and adjust
* the address by -GETPC_ADJ so that the address is within the call
* insn so that addr does not accidentally match the beginning of the
* next guest insn.
*
* However, when the PC comes from the signal frame, it points to
* the actual faulting host insn and not a call insn. Subtracting
* GETPC_ADJ in that case may accidentally match the previous guest insn.
*
* So for the later case, adjust forward to compensate for what
* will be done later by cpu_restore_state_from_tb.
*/
if (helper_retaddr) {
pc = helper_retaddr;
} else {
pc += GETPC_ADJ;
}
/* For synchronous signals we expect to be coming from the vCPU
* thread (so current_cpu should be valid) and either from running
* code or during translation which can fault as we cross pages.
*
* If neither is true then something has gone wrong and we should
* abort rather than try and restart the vCPU execution.
*/
if (!cpu || !cpu->running) {
printf("qemu:%s received signal outside vCPU context @ pc=0x%"
PRIxPTR "\n", __func__, pc);
abort();
}
#if defined(DEBUG_SIGNAL)
printf("qemu: SIGSEGV pc=0x%08lx address=%08lx w=%d oldset=0x%08lx\n",
pc, address, is_write, *(unsigned long *)old_set);
#endif
/* XXX: locking issue */
/* Note that it is important that we don't call page_unprotect() unless
* this is really a "write to nonwriteable page" fault, because
* page_unprotect() assumes that if it is called for an access to
* a page that's writeable this means we had two threads racing and
* another thread got there first and already made the page writeable;
* so we will retry the access. If we were to call page_unprotect()
* for some other kind of fault that should really be passed to the
* guest, we'd end up in an infinite loop of retrying the faulting
* access.
*/
if (is_write && info->si_signo == SIGSEGV && info->si_code == SEGV_ACCERR &&
h2g_valid(address)) {
switch (page_unprotect(h2g(address), pc)) {
case 0:
/* Fault not caused by a page marked unwritable to protect
* cached translations, must be the guest binary's problem.
*/
break;
case 1:
/* Fault caused by protection of cached translation; TBs
* invalidated, so resume execution. Retain helper_retaddr
* for a possible second fault.
*/
return 1;
case 2:
/* Fault caused by protection of cached translation, and the
* currently executing TB was modified and must be exited
* immediately. Clear helper_retaddr for next execution.
*/
helper_retaddr = 0;
cpu_exit_tb_from_sighandler(cpu, old_set);
/* NORETURN */
default:
g_assert_not_reached();
}
}
/* Convert forcefully to guest address space, invalid addresses
are still valid segv ones */
address = h2g_nocheck(address);
cc = CPU_GET_CLASS(cpu);
/* see if it is an MMU fault */
g_assert(cc->handle_mmu_fault);
ret = cc->handle_mmu_fault(cpu, address, 0, is_write, MMU_USER_IDX);
if (ret == 0) {
/* The MMU fault was handled without causing real CPU fault.
* Retain helper_retaddr for a possible second fault.
*/
return 1;
}
/* All other paths lead to cpu_exit; clear helper_retaddr
* for next execution.
*/
helper_retaddr = 0;
if (ret < 0) {
return 0; /* not an MMU fault */
}
/* Now we have a real cpu fault. */
cpu_restore_state(cpu, pc, true);
sigprocmask(SIG_SETMASK, old_set, NULL);
cpu_loop_exit(cpu);
/* never comes here */
return 1;
}
#if defined(__i386__)
#if defined(__NetBSD__)
#include <ucontext.h>
#define EIP_sig(context) ((context)->uc_mcontext.__gregs[_REG_EIP])
#define TRAP_sig(context) ((context)->uc_mcontext.__gregs[_REG_TRAPNO])
#define ERROR_sig(context) ((context)->uc_mcontext.__gregs[_REG_ERR])
#define MASK_sig(context) ((context)->uc_sigmask)
#elif defined(__FreeBSD__) || defined(__DragonFly__)
#include <ucontext.h>
#define EIP_sig(context) (*((unsigned long *)&(context)->uc_mcontext.mc_eip))
#define TRAP_sig(context) ((context)->uc_mcontext.mc_trapno)
#define ERROR_sig(context) ((context)->uc_mcontext.mc_err)
#define MASK_sig(context) ((context)->uc_sigmask)
#elif defined(__OpenBSD__)
#define EIP_sig(context) ((context)->sc_eip)
#define TRAP_sig(context) ((context)->sc_trapno)
#define ERROR_sig(context) ((context)->sc_err)
#define MASK_sig(context) ((context)->sc_mask)
#else
#define EIP_sig(context) ((context)->uc_mcontext.gregs[REG_EIP])
#define TRAP_sig(context) ((context)->uc_mcontext.gregs[REG_TRAPNO])
#define ERROR_sig(context) ((context)->uc_mcontext.gregs[REG_ERR])
#define MASK_sig(context) ((context)->uc_sigmask)
#endif
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
#if defined(__NetBSD__) || defined(__FreeBSD__) || defined(__DragonFly__)
ucontext_t *uc = puc;
#elif defined(__OpenBSD__)
struct sigcontext *uc = puc;
#else
ucontext_t *uc = puc;
#endif
unsigned long pc;
int trapno;
#ifndef REG_EIP
/* for glibc 2.1 */
#define REG_EIP EIP
#define REG_ERR ERR
#define REG_TRAPNO TRAPNO
#endif
pc = EIP_sig(uc);
trapno = TRAP_sig(uc);
return handle_cpu_signal(pc, info,
trapno == 0xe ? (ERROR_sig(uc) >> 1) & 1 : 0,
&MASK_sig(uc));
}
#elif defined(__x86_64__)
#ifdef __NetBSD__
#define PC_sig(context) _UC_MACHINE_PC(context)
#define TRAP_sig(context) ((context)->uc_mcontext.__gregs[_REG_TRAPNO])
#define ERROR_sig(context) ((context)->uc_mcontext.__gregs[_REG_ERR])
#define MASK_sig(context) ((context)->uc_sigmask)
#elif defined(__OpenBSD__)
#define PC_sig(context) ((context)->sc_rip)
#define TRAP_sig(context) ((context)->sc_trapno)
#define ERROR_sig(context) ((context)->sc_err)
#define MASK_sig(context) ((context)->sc_mask)
#elif defined(__FreeBSD__) || defined(__DragonFly__)
#include <ucontext.h>
#define PC_sig(context) (*((unsigned long *)&(context)->uc_mcontext.mc_rip))
#define TRAP_sig(context) ((context)->uc_mcontext.mc_trapno)
#define ERROR_sig(context) ((context)->uc_mcontext.mc_err)
#define MASK_sig(context) ((context)->uc_sigmask)
#else
#define PC_sig(context) ((context)->uc_mcontext.gregs[REG_RIP])
#define TRAP_sig(context) ((context)->uc_mcontext.gregs[REG_TRAPNO])
#define ERROR_sig(context) ((context)->uc_mcontext.gregs[REG_ERR])
#define MASK_sig(context) ((context)->uc_sigmask)
#endif
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
unsigned long pc;
#if defined(__NetBSD__) || defined(__FreeBSD__) || defined(__DragonFly__)
ucontext_t *uc = puc;
#elif defined(__OpenBSD__)
struct sigcontext *uc = puc;
#else
ucontext_t *uc = puc;
#endif
pc = PC_sig(uc);
return handle_cpu_signal(pc, info,
TRAP_sig(uc) == 0xe ? (ERROR_sig(uc) >> 1) & 1 : 0,
&MASK_sig(uc));
}
#elif defined(_ARCH_PPC)
/***********************************************************************
* signal context platform-specific definitions
* From Wine
*/
#ifdef linux
/* All Registers access - only for local access */
#define REG_sig(reg_name, context) \
((context)->uc_mcontext.regs->reg_name)
/* Gpr Registers access */
#define GPR_sig(reg_num, context) REG_sig(gpr[reg_num], context)
/* Program counter */
#define IAR_sig(context) REG_sig(nip, context)
/* Machine State Register (Supervisor) */
#define MSR_sig(context) REG_sig(msr, context)
/* Count register */
#define CTR_sig(context) REG_sig(ctr, context)
/* User's integer exception register */
#define XER_sig(context) REG_sig(xer, context)
/* Link register */
#define LR_sig(context) REG_sig(link, context)
/* Condition register */
#define CR_sig(context) REG_sig(ccr, context)
/* Float Registers access */
#define FLOAT_sig(reg_num, context) \
(((double *)((char *)((context)->uc_mcontext.regs + 48 * 4)))[reg_num])
#define FPSCR_sig(context) \
(*(int *)((char *)((context)->uc_mcontext.regs + (48 + 32 * 2) * 4)))
/* Exception Registers access */
#define DAR_sig(context) REG_sig(dar, context)
#define DSISR_sig(context) REG_sig(dsisr, context)
#define TRAP_sig(context) REG_sig(trap, context)
#endif /* linux */
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
#include <ucontext.h>
#define IAR_sig(context) ((context)->uc_mcontext.mc_srr0)
#define MSR_sig(context) ((context)->uc_mcontext.mc_srr1)
#define CTR_sig(context) ((context)->uc_mcontext.mc_ctr)
#define XER_sig(context) ((context)->uc_mcontext.mc_xer)
#define LR_sig(context) ((context)->uc_mcontext.mc_lr)
#define CR_sig(context) ((context)->uc_mcontext.mc_cr)
/* Exception Registers access */
#define DAR_sig(context) ((context)->uc_mcontext.mc_dar)
#define DSISR_sig(context) ((context)->uc_mcontext.mc_dsisr)
#define TRAP_sig(context) ((context)->uc_mcontext.mc_exc)
#endif /* __FreeBSD__|| __FreeBSD_kernel__ */
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
ucontext_t *uc = puc;
#else
ucontext_t *uc = puc;
#endif
unsigned long pc;
int is_write;
pc = IAR_sig(uc);
is_write = 0;
#if 0
/* ppc 4xx case */
if (DSISR_sig(uc) & 0x00800000) {
is_write = 1;
}
#else
if (TRAP_sig(uc) != 0x400 && (DSISR_sig(uc) & 0x02000000)) {
is_write = 1;
}
#endif
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__alpha__)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
uint32_t *pc = uc->uc_mcontext.sc_pc;
uint32_t insn = *pc;
int is_write = 0;
/* XXX: need kernel patch to get write flag faster */
switch (insn >> 26) {
case 0x0d: /* stw */
case 0x0e: /* stb */
case 0x0f: /* stq_u */
case 0x24: /* stf */
case 0x25: /* stg */
case 0x26: /* sts */
case 0x27: /* stt */
case 0x2c: /* stl */
case 0x2d: /* stq */
case 0x2e: /* stl_c */
case 0x2f: /* stq_c */
is_write = 1;
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__sparc__)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
int is_write;
uint32_t insn;
#if !defined(__arch64__) || defined(CONFIG_SOLARIS)
uint32_t *regs = (uint32_t *)(info + 1);
void *sigmask = (regs + 20);
/* XXX: is there a standard glibc define ? */
unsigned long pc = regs[1];
#else
#ifdef __linux__
struct sigcontext *sc = puc;
unsigned long pc = sc->sigc_regs.tpc;
void *sigmask = (void *)sc->sigc_mask;
#elif defined(__OpenBSD__)
struct sigcontext *uc = puc;
unsigned long pc = uc->sc_pc;
void *sigmask = (void *)(long)uc->sc_mask;
#elif defined(__NetBSD__)
ucontext_t *uc = puc;
unsigned long pc = _UC_MACHINE_PC(uc);
void *sigmask = (void *)&uc->uc_sigmask;
#endif
#endif
/* XXX: need kernel patch to get write flag faster */
is_write = 0;
insn = *(uint32_t *)pc;
if ((insn >> 30) == 3) {
switch ((insn >> 19) & 0x3f) {
case 0x05: /* stb */
case 0x15: /* stba */
case 0x06: /* sth */
case 0x16: /* stha */
case 0x04: /* st */
case 0x14: /* sta */
case 0x07: /* std */
case 0x17: /* stda */
case 0x0e: /* stx */
case 0x1e: /* stxa */
case 0x24: /* stf */
case 0x34: /* stfa */
case 0x27: /* stdf */
case 0x37: /* stdfa */
case 0x26: /* stqf */
case 0x36: /* stqfa */
case 0x25: /* stfsr */
case 0x3c: /* casa */
case 0x3e: /* casxa */
is_write = 1;
break;
}
}
return handle_cpu_signal(pc, info, is_write, sigmask);
}
#elif defined(__arm__)
#if defined(__NetBSD__)
#include <ucontext.h>
#endif
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
#if defined(__NetBSD__)
ucontext_t *uc = puc;
#else
ucontext_t *uc = puc;
#endif
unsigned long pc;
int is_write;
#if defined(__NetBSD__)
pc = uc->uc_mcontext.__gregs[_REG_R15];
#elif defined(__GLIBC__) && (__GLIBC__ < 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ <= 3))
pc = uc->uc_mcontext.gregs[R15];
#else
pc = uc->uc_mcontext.arm_pc;
#endif
/* error_code is the FSR value, in which bit 11 is WnR (assuming a v6 or
* later processor; on v5 we will always report this as a read).
*/
is_write = extract32(uc->uc_mcontext.error_code, 11, 1);
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__aarch64__)
#ifndef ESR_MAGIC
/* Pre-3.16 kernel headers don't have these, so provide fallback definitions */
#define ESR_MAGIC 0x45535201
struct esr_context {
struct _aarch64_ctx head;
uint64_t esr;
};
#endif
static inline struct _aarch64_ctx *first_ctx(ucontext_t *uc)
{
return (struct _aarch64_ctx *)&uc->uc_mcontext.__reserved;
}
static inline struct _aarch64_ctx *next_ctx(struct _aarch64_ctx *hdr)
{
return (struct _aarch64_ctx *)((char *)hdr + hdr->size);
}
int cpu_signal_handler(int host_signum, void *pinfo, void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
uintptr_t pc = uc->uc_mcontext.pc;
bool is_write;
struct _aarch64_ctx *hdr;
struct esr_context const *esrctx = NULL;
/* Find the esr_context, which has the WnR bit in it */
for (hdr = first_ctx(uc); hdr->magic; hdr = next_ctx(hdr)) {
if (hdr->magic == ESR_MAGIC) {
esrctx = (struct esr_context const *)hdr;
break;
}
}
if (esrctx) {
/* For data aborts ESR.EC is 0b10010x: then bit 6 is the WnR bit */
uint64_t esr = esrctx->esr;
is_write = extract32(esr, 27, 5) == 0x12 && extract32(esr, 6, 1) == 1;
} else {
/*
* Fall back to parsing instructions; will only be needed
* for really ancient (pre-3.16) kernels.
*/
uint32_t insn = *(uint32_t *)pc;
is_write = ((insn & 0xbfff0000) == 0x0c000000 /* C3.3.1 */
|| (insn & 0xbfe00000) == 0x0c800000 /* C3.3.2 */
|| (insn & 0xbfdf0000) == 0x0d000000 /* C3.3.3 */
|| (insn & 0xbfc00000) == 0x0d800000 /* C3.3.4 */
|| (insn & 0x3f400000) == 0x08000000 /* C3.3.6 */
|| (insn & 0x3bc00000) == 0x39000000 /* C3.3.13 */
|| (insn & 0x3fc00000) == 0x3d800000 /* ... 128bit */
/* Ignore bits 10, 11 & 21, controlling indexing. */
|| (insn & 0x3bc00000) == 0x38000000 /* C3.3.8-12 */
|| (insn & 0x3fe00000) == 0x3c800000 /* ... 128bit */
/* Ignore bits 23 & 24, controlling indexing. */
|| (insn & 0x3a400000) == 0x28000000); /* C3.3.7,14-16 */
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__s390__)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
unsigned long pc;
uint16_t *pinsn;
int is_write = 0;
pc = uc->uc_mcontext.psw.addr;
/* ??? On linux, the non-rt signal handler has 4 (!) arguments instead
of the normal 2 arguments. The 3rd argument contains the "int_code"
from the hardware which does in fact contain the is_write value.
The rt signal handler, as far as I can tell, does not give this value
at all. Not that we could get to it from here even if it were. */
/* ??? This is not even close to complete, since it ignores all
of the read-modify-write instructions. */
pinsn = (uint16_t *)pc;
switch (pinsn[0] >> 8) {
case 0x50: /* ST */
case 0x42: /* STC */
case 0x40: /* STH */
is_write = 1;
break;
case 0xc4: /* RIL format insns */
switch (pinsn[0] & 0xf) {
case 0xf: /* STRL */
case 0xb: /* STGRL */
case 0x7: /* STHRL */
is_write = 1;
}
break;
case 0xe3: /* RXY format insns */
switch (pinsn[2] & 0xff) {
case 0x50: /* STY */
case 0x24: /* STG */
case 0x72: /* STCY */
case 0x70: /* STHY */
case 0x8e: /* STPQ */
case 0x3f: /* STRVH */
case 0x3e: /* STRV */
case 0x2f: /* STRVG */
is_write = 1;
}
break;
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__mips__)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
greg_t pc = uc->uc_mcontext.pc;
int is_write;
/* XXX: compute is_write */
is_write = 0;
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__riscv)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
greg_t pc = uc->uc_mcontext.__gregs[REG_PC];
uint32_t insn = *(uint32_t *)pc;
int is_write = 0;
/* Detect store by reading the instruction at the program
counter. Note: we currently only generate 32-bit
instructions so we thus only detect 32-bit stores */
switch (((insn >> 0) & 0b11)) {
case 3:
switch (((insn >> 2) & 0b11111)) {
case 8:
switch (((insn >> 12) & 0b111)) {
case 0: /* sb */
case 1: /* sh */
case 2: /* sw */
case 3: /* sd */
case 4: /* sq */
is_write = 1;
break;
default:
break;
}
break;
case 9:
switch (((insn >> 12) & 0b111)) {
case 2: /* fsw */
case 3: /* fsd */
case 4: /* fsq */
is_write = 1;
break;
default:
break;
}
break;
default:
break;
}
}
/* Check for compressed instructions */
switch (((insn >> 13) & 0b111)) {
case 7:
switch (insn & 0b11) {
case 0: /*c.sd */
case 2: /* c.sdsp */
is_write = 1;
break;
default:
break;
}
break;
case 6:
switch (insn & 0b11) {
case 0: /* c.sw */
case 3: /* c.swsp */
is_write = 1;
break;
default:
break;
}
break;
default:
break;
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#else
#error host CPU specific signal handler needed
#endif
/* The softmmu versions of these helpers are in cputlb.c. */
/* Do not allow unaligned operations to proceed. Return the host address. */
static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
int size, uintptr_t retaddr)
{
/* Enforce qemu required alignment. */
if (unlikely(addr & (size - 1))) {
cpu_loop_exit_atomic(ENV_GET_CPU(env), retaddr);
}
helper_retaddr = retaddr;
return g2h(addr);
}
/* Macro to call the above, with local variables from the use context. */
#define ATOMIC_MMU_DECLS do {} while (0)
#define ATOMIC_MMU_LOOKUP atomic_mmu_lookup(env, addr, DATA_SIZE, GETPC())
#define ATOMIC_MMU_CLEANUP do { helper_retaddr = 0; } while (0)
#define ATOMIC_NAME(X) HELPER(glue(glue(atomic_ ## X, SUFFIX), END))
#define EXTRA_ARGS
#define DATA_SIZE 1
#include "atomic_template.h"
#define DATA_SIZE 2
#include "atomic_template.h"
#define DATA_SIZE 4
#include "atomic_template.h"
#ifdef CONFIG_ATOMIC64
#define DATA_SIZE 8
#include "atomic_template.h"
#endif
/* The following is only callable from other helpers, and matches up
with the softmmu version. */
#if HAVE_ATOMIC128 || HAVE_CMPXCHG128
#undef EXTRA_ARGS
#undef ATOMIC_NAME
#undef ATOMIC_MMU_LOOKUP
#define EXTRA_ARGS , TCGMemOpIdx oi, uintptr_t retaddr
#define ATOMIC_NAME(X) \
HELPER(glue(glue(glue(atomic_ ## X, SUFFIX), END), _mmu))
#define ATOMIC_MMU_LOOKUP atomic_mmu_lookup(env, addr, DATA_SIZE, retaddr)
#define DATA_SIZE 16
#include "atomic_template.h"
#endif

299
aio-posix.c Normal file
View File

@@ -0,0 +1,299 @@
/*
* QEMU aio implementation
*
* Copyright IBM, Corp. 2008
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu-common.h"
#include "block/block.h"
#include "qemu/queue.h"
#include "qemu/sockets.h"
struct AioHandler
{
GPollFD pfd;
IOHandler *io_read;
IOHandler *io_write;
int deleted;
void *opaque;
QLIST_ENTRY(AioHandler) node;
};
static AioHandler *find_aio_handler(AioContext *ctx, int fd)
{
AioHandler *node;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (node->pfd.fd == fd)
if (!node->deleted)
return node;
}
return NULL;
}
void aio_set_fd_handler(AioContext *ctx,
int fd,
IOHandler *io_read,
IOHandler *io_write,
void *opaque)
{
AioHandler *node;
node = find_aio_handler(ctx, fd);
/* Are we deleting the fd handler? */
if (!io_read && !io_write) {
if (node) {
g_source_remove_poll(&ctx->source, &node->pfd);
/* If the lock is held, just mark the node as deleted */
if (ctx->walking_handlers) {
node->deleted = 1;
node->pfd.revents = 0;
} else {
/* Otherwise, delete it for real. We can't just mark it as
* deleted because deleted nodes are only cleaned up after
* releasing the walking_handlers lock.
*/
QLIST_REMOVE(node, node);
g_free(node);
}
}
} else {
if (node == NULL) {
/* Alloc and insert if it's not already there */
node = g_new0(AioHandler, 1);
node->pfd.fd = fd;
QLIST_INSERT_HEAD(&ctx->aio_handlers, node, node);
g_source_add_poll(&ctx->source, &node->pfd);
}
/* Update handler with latest information */
node->io_read = io_read;
node->io_write = io_write;
node->opaque = opaque;
node->pfd.events = (io_read ? G_IO_IN | G_IO_HUP | G_IO_ERR : 0);
node->pfd.events |= (io_write ? G_IO_OUT | G_IO_ERR : 0);
}
aio_notify(ctx);
}
void aio_set_event_notifier(AioContext *ctx,
EventNotifier *notifier,
EventNotifierHandler *io_read)
{
aio_set_fd_handler(ctx, event_notifier_get_fd(notifier),
(IOHandler *)io_read, NULL, notifier);
}
bool aio_prepare(AioContext *ctx)
{
return false;
}
bool aio_pending(AioContext *ctx)
{
AioHandler *node;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
int revents;
revents = node->pfd.revents & node->pfd.events;
if (revents & (G_IO_IN | G_IO_HUP | G_IO_ERR) && node->io_read) {
return true;
}
if (revents & (G_IO_OUT | G_IO_ERR) && node->io_write) {
return true;
}
}
return false;
}
bool aio_dispatch(AioContext *ctx)
{
AioHandler *node;
bool progress = false;
/*
* If there are callbacks left that have been queued, we need to call them.
* Do not call select in this case, because it is possible that the caller
* does not need a complete flush (as is the case for aio_poll loops).
*/
if (aio_bh_poll(ctx)) {
progress = true;
}
/*
* We have to walk very carefully in case aio_set_fd_handler is
* called while we're walking.
*/
node = QLIST_FIRST(&ctx->aio_handlers);
while (node) {
AioHandler *tmp;
int revents;
ctx->walking_handlers++;
revents = node->pfd.revents & node->pfd.events;
node->pfd.revents = 0;
if (!node->deleted &&
(revents & (G_IO_IN | G_IO_HUP | G_IO_ERR)) &&
node->io_read) {
node->io_read(node->opaque);
/* aio_notify() does not count as progress */
if (node->opaque != &ctx->notifier) {
progress = true;
}
}
if (!node->deleted &&
(revents & (G_IO_OUT | G_IO_ERR)) &&
node->io_write) {
node->io_write(node->opaque);
progress = true;
}
tmp = node;
node = QLIST_NEXT(node, node);
ctx->walking_handlers--;
if (!ctx->walking_handlers && tmp->deleted) {
QLIST_REMOVE(tmp, node);
g_free(tmp);
}
}
/* Run our timers */
progress |= timerlistgroup_run_timers(&ctx->tlg);
return progress;
}
/* These thread-local variables are used only in a small part of aio_poll
* around the call to the poll() system call. In particular they are not
* used while aio_poll is performing callbacks, which makes it much easier
* to think about reentrancy!
*
* Stack-allocated arrays would be perfect but they have size limitations;
* heap allocation is expensive enough that we want to reuse arrays across
* calls to aio_poll(). And because poll() has to be called without holding
* any lock, the arrays cannot be stored in AioContext. Thread-local data
* has none of the disadvantages of these three options.
*/
static __thread GPollFD *pollfds;
static __thread AioHandler **nodes;
static __thread unsigned npfd, nalloc;
static __thread Notifier pollfds_cleanup_notifier;
static void pollfds_cleanup(Notifier *n, void *unused)
{
g_assert(npfd == 0);
g_free(pollfds);
g_free(nodes);
nalloc = 0;
}
static void add_pollfd(AioHandler *node)
{
if (npfd == nalloc) {
if (nalloc == 0) {
pollfds_cleanup_notifier.notify = pollfds_cleanup;
qemu_thread_atexit_add(&pollfds_cleanup_notifier);
nalloc = 8;
} else {
g_assert(nalloc <= INT_MAX);
nalloc *= 2;
}
pollfds = g_renew(GPollFD, pollfds, nalloc);
nodes = g_renew(AioHandler *, nodes, nalloc);
}
nodes[npfd] = node;
pollfds[npfd] = (GPollFD) {
.fd = node->pfd.fd,
.events = node->pfd.events,
};
npfd++;
}
bool aio_poll(AioContext *ctx, bool blocking)
{
AioHandler *node;
int i, ret;
bool progress;
int64_t timeout;
aio_context_acquire(ctx);
progress = false;
/* aio_notify can avoid the expensive event_notifier_set if
* everything (file descriptors, bottom halves, timers) will
* be re-evaluated before the next blocking poll(). This is
* already true when aio_poll is called with blocking == false;
* if blocking == true, it is only true after poll() returns,
* so disable the optimization now.
*/
if (blocking) {
atomic_add(&ctx->notify_me, 2);
}
ctx->walking_handlers++;
assert(npfd == 0);
/* fill pollfds */
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (!node->deleted && node->pfd.events) {
add_pollfd(node);
}
}
timeout = blocking ? aio_compute_timeout(ctx) : 0;
/* wait until next event */
if (timeout) {
aio_context_release(ctx);
}
ret = qemu_poll_ns((GPollFD *)pollfds, npfd, timeout);
if (blocking) {
atomic_sub(&ctx->notify_me, 2);
}
if (timeout) {
aio_context_acquire(ctx);
}
aio_notify_accept(ctx);
/* if we have any readable fds, dispatch event */
if (ret > 0) {
for (i = 0; i < npfd; i++) {
nodes[i]->pfd.revents = pollfds[i].revents;
}
}
npfd = 0;
ctx->walking_handlers--;
/* Run dispatch even if there were no readable fds to run timers */
if (aio_dispatch(ctx)) {
progress = true;
}
aio_context_release(ctx);
return progress;
}

365
aio-win32.c Normal file
View File

@@ -0,0 +1,365 @@
/*
* QEMU aio implementation
*
* Copyright IBM Corp., 2008
* Copyright Red Hat Inc., 2012
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
* Paolo Bonzini <pbonzini@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu-common.h"
#include "block/block.h"
#include "qemu/queue.h"
#include "qemu/sockets.h"
struct AioHandler {
EventNotifier *e;
IOHandler *io_read;
IOHandler *io_write;
EventNotifierHandler *io_notify;
GPollFD pfd;
int deleted;
void *opaque;
QLIST_ENTRY(AioHandler) node;
};
void aio_set_fd_handler(AioContext *ctx,
int fd,
IOHandler *io_read,
IOHandler *io_write,
void *opaque)
{
/* fd is a SOCKET in our case */
AioHandler *node;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (node->pfd.fd == fd && !node->deleted) {
break;
}
}
/* Are we deleting the fd handler? */
if (!io_read && !io_write) {
if (node) {
/* If the lock is held, just mark the node as deleted */
if (ctx->walking_handlers) {
node->deleted = 1;
node->pfd.revents = 0;
} else {
/* Otherwise, delete it for real. We can't just mark it as
* deleted because deleted nodes are only cleaned up after
* releasing the walking_handlers lock.
*/
QLIST_REMOVE(node, node);
g_free(node);
}
}
} else {
HANDLE event;
if (node == NULL) {
/* Alloc and insert if it's not already there */
node = g_new0(AioHandler, 1);
node->pfd.fd = fd;
QLIST_INSERT_HEAD(&ctx->aio_handlers, node, node);
}
node->pfd.events = 0;
if (node->io_read) {
node->pfd.events |= G_IO_IN;
}
if (node->io_write) {
node->pfd.events |= G_IO_OUT;
}
node->e = &ctx->notifier;
/* Update handler with latest information */
node->opaque = opaque;
node->io_read = io_read;
node->io_write = io_write;
event = event_notifier_get_handle(&ctx->notifier);
WSAEventSelect(node->pfd.fd, event,
FD_READ | FD_ACCEPT | FD_CLOSE |
FD_CONNECT | FD_WRITE | FD_OOB);
}
aio_notify(ctx);
}
void aio_set_event_notifier(AioContext *ctx,
EventNotifier *e,
EventNotifierHandler *io_notify)
{
AioHandler *node;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (node->e == e && !node->deleted) {
break;
}
}
/* Are we deleting the fd handler? */
if (!io_notify) {
if (node) {
g_source_remove_poll(&ctx->source, &node->pfd);
/* If the lock is held, just mark the node as deleted */
if (ctx->walking_handlers) {
node->deleted = 1;
node->pfd.revents = 0;
} else {
/* Otherwise, delete it for real. We can't just mark it as
* deleted because deleted nodes are only cleaned up after
* releasing the walking_handlers lock.
*/
QLIST_REMOVE(node, node);
g_free(node);
}
}
} else {
if (node == NULL) {
/* Alloc and insert if it's not already there */
node = g_new0(AioHandler, 1);
node->e = e;
node->pfd.fd = (uintptr_t)event_notifier_get_handle(e);
node->pfd.events = G_IO_IN;
QLIST_INSERT_HEAD(&ctx->aio_handlers, node, node);
g_source_add_poll(&ctx->source, &node->pfd);
}
/* Update handler with latest information */
node->io_notify = io_notify;
}
aio_notify(ctx);
}
bool aio_prepare(AioContext *ctx)
{
static struct timeval tv0;
AioHandler *node;
bool have_select_revents = false;
fd_set rfds, wfds;
/* fill fd sets */
FD_ZERO(&rfds);
FD_ZERO(&wfds);
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (node->io_read) {
FD_SET ((SOCKET)node->pfd.fd, &rfds);
}
if (node->io_write) {
FD_SET ((SOCKET)node->pfd.fd, &wfds);
}
}
if (select(0, &rfds, &wfds, NULL, &tv0) > 0) {
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
node->pfd.revents = 0;
if (FD_ISSET(node->pfd.fd, &rfds)) {
node->pfd.revents |= G_IO_IN;
have_select_revents = true;
}
if (FD_ISSET(node->pfd.fd, &wfds)) {
node->pfd.revents |= G_IO_OUT;
have_select_revents = true;
}
}
}
return have_select_revents;
}
bool aio_pending(AioContext *ctx)
{
AioHandler *node;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (node->pfd.revents && node->io_notify) {
return true;
}
if ((node->pfd.revents & G_IO_IN) && node->io_read) {
return true;
}
if ((node->pfd.revents & G_IO_OUT) && node->io_write) {
return true;
}
}
return false;
}
static bool aio_dispatch_handlers(AioContext *ctx, HANDLE event)
{
AioHandler *node;
bool progress = false;
/*
* We have to walk very carefully in case aio_set_fd_handler is
* called while we're walking.
*/
node = QLIST_FIRST(&ctx->aio_handlers);
while (node) {
AioHandler *tmp;
int revents = node->pfd.revents;
ctx->walking_handlers++;
if (!node->deleted &&
(revents || event_notifier_get_handle(node->e) == event) &&
node->io_notify) {
node->pfd.revents = 0;
node->io_notify(node->e);
/* aio_notify() does not count as progress */
if (node->e != &ctx->notifier) {
progress = true;
}
}
if (!node->deleted &&
(node->io_read || node->io_write)) {
node->pfd.revents = 0;
if ((revents & G_IO_IN) && node->io_read) {
node->io_read(node->opaque);
progress = true;
}
if ((revents & G_IO_OUT) && node->io_write) {
node->io_write(node->opaque);
progress = true;
}
/* if the next select() will return an event, we have progressed */
if (event == event_notifier_get_handle(&ctx->notifier)) {
WSANETWORKEVENTS ev;
WSAEnumNetworkEvents(node->pfd.fd, event, &ev);
if (ev.lNetworkEvents) {
progress = true;
}
}
}
tmp = node;
node = QLIST_NEXT(node, node);
ctx->walking_handlers--;
if (!ctx->walking_handlers && tmp->deleted) {
QLIST_REMOVE(tmp, node);
g_free(tmp);
}
}
return progress;
}
bool aio_dispatch(AioContext *ctx)
{
bool progress;
progress = aio_bh_poll(ctx);
progress |= aio_dispatch_handlers(ctx, INVALID_HANDLE_VALUE);
progress |= timerlistgroup_run_timers(&ctx->tlg);
return progress;
}
bool aio_poll(AioContext *ctx, bool blocking)
{
AioHandler *node;
HANDLE events[MAXIMUM_WAIT_OBJECTS + 1];
bool progress, have_select_revents, first;
int count;
int timeout;
aio_context_acquire(ctx);
progress = false;
/* aio_notify can avoid the expensive event_notifier_set if
* everything (file descriptors, bottom halves, timers) will
* be re-evaluated before the next blocking poll(). This is
* already true when aio_poll is called with blocking == false;
* if blocking == true, it is only true after poll() returns,
* so disable the optimization now.
*/
if (blocking) {
atomic_add(&ctx->notify_me, 2);
}
have_select_revents = aio_prepare(ctx);
ctx->walking_handlers++;
/* fill fd sets */
count = 0;
QLIST_FOREACH(node, &ctx->aio_handlers, node) {
if (!node->deleted && node->io_notify) {
events[count++] = event_notifier_get_handle(node->e);
}
}
ctx->walking_handlers--;
first = true;
/* ctx->notifier is always registered. */
assert(count > 0);
/* Multiple iterations, all of them non-blocking except the first,
* may be necessary to process all pending events. After the first
* WaitForMultipleObjects call ctx->notify_me will be decremented.
*/
do {
HANDLE event;
int ret;
timeout = blocking && !have_select_revents
? qemu_timeout_ns_to_ms(aio_compute_timeout(ctx)) : 0;
if (timeout) {
aio_context_release(ctx);
}
ret = WaitForMultipleObjects(count, events, FALSE, timeout);
if (blocking) {
assert(first);
atomic_sub(&ctx->notify_me, 2);
}
if (timeout) {
aio_context_acquire(ctx);
}
if (first) {
aio_notify_accept(ctx);
progress |= aio_bh_poll(ctx);
first = false;
}
/* if we have any signaled events, dispatch event */
event = NULL;
if ((DWORD) (ret - WAIT_OBJECT_0) < count) {
event = events[ret - WAIT_OBJECT_0];
events[ret - WAIT_OBJECT_0] = events[--count];
} else if (!have_select_revents) {
break;
}
have_select_revents = false;
blocking = false;
progress |= aio_dispatch_handlers(ctx, event);
} while (count > 0);
progress |= timerlistgroup_run_timers(&ctx->tlg);
aio_context_release(ctx);
return progress;
}

View File

@@ -21,19 +21,16 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include <stdint.h>
#include "sysemu/sysemu.h"
#include "sysemu/arch_init.h"
#include "hw/pci/pci.h"
#include "hw/audio/soundhw.h"
#include "qapi/qapi-commands-misc.h"
#include "qapi/error.h"
#include "hw/audio/audio.h"
#include "hw/i386/smbios.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "qmp-commands.h"
#include "hw/acpi/acpi.h"
#include "qemu/help_option.h"
#ifdef TARGET_SPARC
int graphic_width = 1024;
@@ -52,44 +49,237 @@ int graphic_depth = 32;
#define QEMU_ARCH QEMU_ARCH_ARM
#elif defined(TARGET_CRIS)
#define QEMU_ARCH QEMU_ARCH_CRIS
#elif defined(TARGET_HPPA)
#define QEMU_ARCH QEMU_ARCH_HPPA
#elif defined(TARGET_I386)
#define QEMU_ARCH QEMU_ARCH_I386
#elif defined(TARGET_LM32)
#define QEMU_ARCH QEMU_ARCH_LM32
#elif defined(TARGET_M68K)
#define QEMU_ARCH QEMU_ARCH_M68K
#elif defined(TARGET_LM32)
#define QEMU_ARCH QEMU_ARCH_LM32
#elif defined(TARGET_MICROBLAZE)
#define QEMU_ARCH QEMU_ARCH_MICROBLAZE
#elif defined(TARGET_MIPS)
#define QEMU_ARCH QEMU_ARCH_MIPS
#elif defined(TARGET_MOXIE)
#define QEMU_ARCH QEMU_ARCH_MOXIE
#elif defined(TARGET_NIOS2)
#define QEMU_ARCH QEMU_ARCH_NIOS2
#elif defined(TARGET_OPENRISC)
#define QEMU_ARCH QEMU_ARCH_OPENRISC
#elif defined(TARGET_PPC)
#define QEMU_ARCH QEMU_ARCH_PPC
#elif defined(TARGET_RISCV)
#define QEMU_ARCH QEMU_ARCH_RISCV
#elif defined(TARGET_S390X)
#define QEMU_ARCH QEMU_ARCH_S390X
#elif defined(TARGET_SH4)
#define QEMU_ARCH QEMU_ARCH_SH4
#elif defined(TARGET_SPARC)
#define QEMU_ARCH QEMU_ARCH_SPARC
#elif defined(TARGET_TRICORE)
#define QEMU_ARCH QEMU_ARCH_TRICORE
#elif defined(TARGET_UNICORE32)
#define QEMU_ARCH QEMU_ARCH_UNICORE32
#elif defined(TARGET_XTENSA)
#define QEMU_ARCH QEMU_ARCH_XTENSA
#elif defined(TARGET_UNICORE32)
#define QEMU_ARCH QEMU_ARCH_UNICORE32
#elif defined(TARGET_TRICORE)
#define QEMU_ARCH QEMU_ARCH_TRICORE
#endif
const uint32_t arch_type = QEMU_ARCH;
static struct defconfig_file {
const char *filename;
/* Indicates it is an user config file (disabled by -no-user-config) */
bool userconfig;
} default_config_files[] = {
{ CONFIG_QEMU_CONFDIR "/qemu.conf", true },
{ NULL }, /* end of list */
};
int qemu_read_default_config_files(bool userconfig)
{
int ret;
struct defconfig_file *f;
for (f = default_config_files; f->filename; f++) {
if (!userconfig && f->userconfig) {
continue;
}
ret = qemu_read_config_file(f->filename);
if (ret < 0 && ret != -ENOENT) {
return ret;
}
}
return 0;
}
struct soundhw {
const char *name;
const char *descr;
int enabled;
int isa;
union {
int (*init_isa) (ISABus *bus);
int (*init_pci) (PCIBus *bus);
} init;
};
static struct soundhw soundhw[9];
static int soundhw_count;
void isa_register_soundhw(const char *name, const char *descr,
int (*init_isa)(ISABus *bus))
{
assert(soundhw_count < ARRAY_SIZE(soundhw) - 1);
soundhw[soundhw_count].name = name;
soundhw[soundhw_count].descr = descr;
soundhw[soundhw_count].isa = 1;
soundhw[soundhw_count].init.init_isa = init_isa;
soundhw_count++;
}
void pci_register_soundhw(const char *name, const char *descr,
int (*init_pci)(PCIBus *bus))
{
assert(soundhw_count < ARRAY_SIZE(soundhw) - 1);
soundhw[soundhw_count].name = name;
soundhw[soundhw_count].descr = descr;
soundhw[soundhw_count].isa = 0;
soundhw[soundhw_count].init.init_pci = init_pci;
soundhw_count++;
}
void select_soundhw(const char *optarg)
{
struct soundhw *c;
if (is_help_option(optarg)) {
show_valid_cards:
if (soundhw_count) {
printf("Valid sound card names (comma separated):\n");
for (c = soundhw; c->name; ++c) {
printf ("%-11s %s\n", c->name, c->descr);
}
printf("\n-soundhw all will enable all of the above\n");
} else {
printf("Machine has no user-selectable audio hardware "
"(it may or may not have always-present audio hardware).\n");
}
exit(!is_help_option(optarg));
}
else {
size_t l;
const char *p;
char *e;
int bad_card = 0;
if (!strcmp(optarg, "all")) {
for (c = soundhw; c->name; ++c) {
c->enabled = 1;
}
return;
}
p = optarg;
while (*p) {
e = strchr(p, ',');
l = !e ? strlen(p) : (size_t) (e - p);
for (c = soundhw; c->name; ++c) {
if (!strncmp(c->name, p, l) && !c->name[l]) {
c->enabled = 1;
break;
}
}
if (!c->name) {
if (l > 80) {
error_report("Unknown sound card name (too big to show)");
}
else {
error_report("Unknown sound card name `%.*s'",
(int) l, p);
}
bad_card = 1;
}
p += l + (e != NULL);
}
if (bad_card) {
goto show_valid_cards;
}
}
}
void audio_init(void)
{
struct soundhw *c;
ISABus *isa_bus = (ISABus *) object_resolve_path_type("", TYPE_ISA_BUS, NULL);
PCIBus *pci_bus = (PCIBus *) object_resolve_path_type("", TYPE_PCI_BUS, NULL);
for (c = soundhw; c->name; ++c) {
if (c->enabled) {
if (c->isa) {
if (!isa_bus) {
error_report("ISA bus not available for %s", c->name);
exit(1);
}
c->init.init_isa(isa_bus);
} else {
if (!pci_bus) {
error_report("PCI bus not available for %s", c->name);
exit(1);
}
c->init.init_pci(pci_bus);
}
}
}
}
int qemu_uuid_parse(const char *str, uint8_t *uuid)
{
int ret;
if (strlen(str) != 36) {
return -1;
}
ret = sscanf(str, UUID_FMT, &uuid[0], &uuid[1], &uuid[2], &uuid[3],
&uuid[4], &uuid[5], &uuid[6], &uuid[7], &uuid[8], &uuid[9],
&uuid[10], &uuid[11], &uuid[12], &uuid[13], &uuid[14],
&uuid[15]);
if (ret != 16) {
return -1;
}
return 0;
}
void do_acpitable_option(const QemuOpts *opts)
{
#ifdef TARGET_I386
Error *err = NULL;
acpi_table_add(opts, &err);
if (err) {
error_report("Wrong acpi table provided: %s",
error_get_pretty(err));
error_free(err);
exit(1);
}
#endif
}
void do_smbios_option(QemuOpts *opts)
{
#ifdef TARGET_I386
smbios_entry_add(opts);
#endif
}
void cpudef_init(void)
{
#if defined(cpudef_setup)
cpudef_setup(); /* parse cpu definitions in target config file */
#endif
}
int kvm_available(void)
{
#ifdef CONFIG_KVM
@@ -113,8 +303,7 @@ TargetInfo *qmp_query_target(Error **errp)
{
TargetInfo *info = g_malloc0(sizeof(*info));
info->arch = qapi_enum_parse(&SysEmuTarget_lookup, TARGET_NAME, -1,
&error_abort);
info->arch = g_strdup(TARGET_NAME);
return info;
}

362
async.c Normal file
View File

@@ -0,0 +1,362 @@
/*
* QEMU System Emulator
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu-common.h"
#include "block/aio.h"
#include "block/thread-pool.h"
#include "qemu/main-loop.h"
#include "qemu/atomic.h"
/***********************************************************/
/* bottom halves (can be seen as timers which expire ASAP) */
struct QEMUBH {
AioContext *ctx;
QEMUBHFunc *cb;
void *opaque;
QEMUBH *next;
bool scheduled;
bool idle;
bool deleted;
};
QEMUBH *aio_bh_new(AioContext *ctx, QEMUBHFunc *cb, void *opaque)
{
QEMUBH *bh;
bh = g_new(QEMUBH, 1);
*bh = (QEMUBH){
.ctx = ctx,
.cb = cb,
.opaque = opaque,
};
qemu_mutex_lock(&ctx->bh_lock);
bh->next = ctx->first_bh;
/* Make sure that the members are ready before putting bh into list */
smp_wmb();
ctx->first_bh = bh;
qemu_mutex_unlock(&ctx->bh_lock);
return bh;
}
/* Multiple occurrences of aio_bh_poll cannot be called concurrently */
int aio_bh_poll(AioContext *ctx)
{
QEMUBH *bh, **bhp, *next;
int ret;
ctx->walking_bh++;
ret = 0;
for (bh = ctx->first_bh; bh; bh = next) {
/* Make sure that fetching bh happens before accessing its members */
smp_read_barrier_depends();
next = bh->next;
/* The atomic_xchg is paired with the one in qemu_bh_schedule. The
* implicit memory barrier ensures that the callback sees all writes
* done by the scheduling thread. It also ensures that the scheduling
* thread sees the zero before bh->cb has run, and thus will call
* aio_notify again if necessary.
*/
if (!bh->deleted && atomic_xchg(&bh->scheduled, 0)) {
/* Idle BHs and the notify BH don't count as progress */
if (!bh->idle && bh != ctx->notify_dummy_bh) {
ret = 1;
}
bh->idle = 0;
bh->cb(bh->opaque);
}
}
ctx->walking_bh--;
/* remove deleted bhs */
if (!ctx->walking_bh) {
qemu_mutex_lock(&ctx->bh_lock);
bhp = &ctx->first_bh;
while (*bhp) {
bh = *bhp;
if (bh->deleted) {
*bhp = bh->next;
g_free(bh);
} else {
bhp = &bh->next;
}
}
qemu_mutex_unlock(&ctx->bh_lock);
}
return ret;
}
void qemu_bh_schedule_idle(QEMUBH *bh)
{
bh->idle = 1;
/* Make sure that idle & any writes needed by the callback are done
* before the locations are read in the aio_bh_poll.
*/
atomic_mb_set(&bh->scheduled, 1);
}
void qemu_bh_schedule(QEMUBH *bh)
{
AioContext *ctx;
ctx = bh->ctx;
bh->idle = 0;
/* The memory barrier implicit in atomic_xchg makes sure that:
* 1. idle & any writes needed by the callback are done before the
* locations are read in the aio_bh_poll.
* 2. ctx is loaded before scheduled is set and the callback has a chance
* to execute.
*/
if (atomic_xchg(&bh->scheduled, 1) == 0) {
aio_notify(ctx);
}
}
/* This func is async.
*/
void qemu_bh_cancel(QEMUBH *bh)
{
bh->scheduled = 0;
}
/* This func is async.The bottom half will do the delete action at the finial
* end.
*/
void qemu_bh_delete(QEMUBH *bh)
{
bh->scheduled = 0;
bh->deleted = 1;
}
int64_t
aio_compute_timeout(AioContext *ctx)
{
int64_t deadline;
int timeout = -1;
QEMUBH *bh;
for (bh = ctx->first_bh; bh; bh = bh->next) {
if (!bh->deleted && bh->scheduled) {
if (bh->idle) {
/* idle bottom halves will be polled at least
* every 10ms */
timeout = 10000000;
} else {
/* non-idle bottom halves will be executed
* immediately */
return 0;
}
}
}
deadline = timerlistgroup_deadline_ns(&ctx->tlg);
if (deadline == 0) {
return 0;
} else {
return qemu_soonest_timeout(timeout, deadline);
}
}
static gboolean
aio_ctx_prepare(GSource *source, gint *timeout)
{
AioContext *ctx = (AioContext *) source;
atomic_or(&ctx->notify_me, 1);
/* We assume there is no timeout already supplied */
*timeout = qemu_timeout_ns_to_ms(aio_compute_timeout(ctx));
if (aio_prepare(ctx)) {
*timeout = 0;
}
return *timeout == 0;
}
static gboolean
aio_ctx_check(GSource *source)
{
AioContext *ctx = (AioContext *) source;
QEMUBH *bh;
atomic_and(&ctx->notify_me, ~1);
aio_notify_accept(ctx);
for (bh = ctx->first_bh; bh; bh = bh->next) {
if (!bh->deleted && bh->scheduled) {
return true;
}
}
return aio_pending(ctx) || (timerlistgroup_deadline_ns(&ctx->tlg) == 0);
}
static gboolean
aio_ctx_dispatch(GSource *source,
GSourceFunc callback,
gpointer user_data)
{
AioContext *ctx = (AioContext *) source;
assert(callback == NULL);
aio_dispatch(ctx);
return true;
}
static void
aio_ctx_finalize(GSource *source)
{
AioContext *ctx = (AioContext *) source;
qemu_bh_delete(ctx->notify_dummy_bh);
thread_pool_free(ctx->thread_pool);
qemu_mutex_lock(&ctx->bh_lock);
while (ctx->first_bh) {
QEMUBH *next = ctx->first_bh->next;
/* qemu_bh_delete() must have been called on BHs in this AioContext */
assert(ctx->first_bh->deleted);
g_free(ctx->first_bh);
ctx->first_bh = next;
}
qemu_mutex_unlock(&ctx->bh_lock);
aio_set_event_notifier(ctx, &ctx->notifier, NULL);
event_notifier_cleanup(&ctx->notifier);
rfifolock_destroy(&ctx->lock);
qemu_mutex_destroy(&ctx->bh_lock);
timerlistgroup_deinit(&ctx->tlg);
}
static GSourceFuncs aio_source_funcs = {
aio_ctx_prepare,
aio_ctx_check,
aio_ctx_dispatch,
aio_ctx_finalize
};
GSource *aio_get_g_source(AioContext *ctx)
{
g_source_ref(&ctx->source);
return &ctx->source;
}
ThreadPool *aio_get_thread_pool(AioContext *ctx)
{
if (!ctx->thread_pool) {
ctx->thread_pool = thread_pool_new(ctx);
}
return ctx->thread_pool;
}
void aio_notify(AioContext *ctx)
{
/* Write e.g. bh->scheduled before reading ctx->notify_me. Pairs
* with atomic_or in aio_ctx_prepare or atomic_add in aio_poll.
*/
smp_mb();
if (ctx->notify_me) {
event_notifier_set(&ctx->notifier);
atomic_mb_set(&ctx->notified, true);
}
}
void aio_notify_accept(AioContext *ctx)
{
if (atomic_xchg(&ctx->notified, false)) {
event_notifier_test_and_clear(&ctx->notifier);
}
}
static void aio_timerlist_notify(void *opaque)
{
aio_notify(opaque);
}
static void aio_rfifolock_cb(void *opaque)
{
AioContext *ctx = opaque;
/* Kick owner thread in case they are blocked in aio_poll() */
qemu_bh_schedule(ctx->notify_dummy_bh);
}
static void notify_dummy_bh(void *opaque)
{
/* Do nothing, we were invoked just to force the event loop to iterate */
}
static void event_notifier_dummy_cb(EventNotifier *e)
{
}
AioContext *aio_context_new(Error **errp)
{
int ret;
AioContext *ctx;
ctx = (AioContext *) g_source_new(&aio_source_funcs, sizeof(AioContext));
ret = event_notifier_init(&ctx->notifier, false);
if (ret < 0) {
g_source_destroy(&ctx->source);
error_setg_errno(errp, -ret, "Failed to initialize event notifier");
return NULL;
}
g_source_set_can_recurse(&ctx->source, true);
aio_set_event_notifier(ctx, &ctx->notifier,
(EventNotifierHandler *)
event_notifier_dummy_cb);
ctx->thread_pool = NULL;
qemu_mutex_init(&ctx->bh_lock);
rfifolock_init(&ctx->lock, aio_rfifolock_cb, ctx);
timerlistgroup_init(&ctx->tlg, aio_timerlist_notify, ctx);
ctx->notify_dummy_bh = aio_bh_new(ctx, notify_dummy_bh, NULL);
return ctx;
}
void aio_context_ref(AioContext *ctx)
{
g_source_ref(&ctx->source);
}
void aio_context_unref(AioContext *ctx)
{
g_source_unref(&ctx->source);
}
void aio_context_acquire(AioContext *ctx)
{
rfifolock_lock(&ctx->lock);
}
void aio_context_release(AioContext *ctx)
{
rfifolock_unlock(&ctx->lock);
}

View File

@@ -1,31 +1,13 @@
common-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
common-obj-$(CONFIG_SDL) += sdlaudio.o
common-obj-$(CONFIG_OSS) += ossaudio.o
common-obj-$(CONFIG_SPICE) += spiceaudio.o
common-obj-$(CONFIG_AUDIO_COREAUDIO) += coreaudio.o
common-obj-$(CONFIG_AUDIO_DSOUND) += dsoundaudio.o
common-obj-$(CONFIG_COREAUDIO) += coreaudio.o
common-obj-$(CONFIG_ALSA) += alsaaudio.o
common-obj-$(CONFIG_DSOUND) += dsoundaudio.o
common-obj-$(CONFIG_PA) += paaudio.o
common-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
common-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o
common-obj-y += wavcapture.o
coreaudio.o-libs := $(COREAUDIO_LIBS)
dsoundaudio.o-libs := $(DSOUND_LIBS)
# alsa module
common-obj-$(CONFIG_AUDIO_ALSA) += alsa.mo
alsa.mo-objs = alsaaudio.o
alsa.mo-libs := $(ALSA_LIBS)
# oss module
common-obj-$(CONFIG_AUDIO_OSS) += oss.mo
oss.mo-objs = ossaudio.o
oss.mo-libs := $(OSS_LIBS)
# pulseaudio module
common-obj-$(CONFIG_AUDIO_PA) += pa.mo
pa.mo-objs = paaudio.o
pa.mo-libs := $(PULSE_LIBS)
# sdl module
common-obj-$(CONFIG_AUDIO_SDL) += sdl.mo
sdl.mo-objs = sdlaudio.o
sdl.mo-cflags := $(SDL_CFLAGS)
sdl.mo-libs := $(SDL_LIBS)
sdlaudio.o-cflags := $(SDL_CFLAGS)

View File

@@ -21,14 +21,15 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <alsa/asoundlib.h>
#include "qemu-common.h"
#include "qemu/main-loop.h"
#include "audio.h"
#include "trace.h"
#if QEMU_GNUC_PREREQ(4, 3)
#pragma GCC diagnostic ignored "-Waddress"
#endif
#define AUDIO_CAP "alsa"
#include "audio_int.h"
@@ -821,7 +822,7 @@ static int alsa_init_out(HWVoiceOut *hw, struct audsettings *as,
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = obt.samples;
alsa->pcm_buf = audio_calloc(__func__, obt.samples, 1 << hw->info.shift);
alsa->pcm_buf = audio_calloc (AUDIO_FUNC, obt.samples, 1 << hw->info.shift);
if (!alsa->pcm_buf) {
dolog ("Could not allocate DAC buffer (%d samples, each %d bytes)\n",
hw->samples, 1 << hw->info.shift);
@@ -932,7 +933,7 @@ static int alsa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = obt.samples;
alsa->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
alsa->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
if (!alsa->pcm_buf) {
dolog ("Could not allocate ADC buffer (%d samples, each %d bytes)\n",
hw->samples, 1 << hw->info.shift);
@@ -1211,7 +1212,7 @@ static struct audio_pcm_ops alsa_pcm_ops = {
.ctl_in = alsa_ctl_in,
};
static struct audio_driver alsa_audio_driver = {
struct audio_driver alsa_audio_driver = {
.name = "alsa",
.descr = "ALSA http://www.alsa-project.org",
.options = alsa_options,
@@ -1224,9 +1225,3 @@ static struct audio_driver alsa_audio_driver = {
.voice_size_out = sizeof (ALSAVoiceOut),
.voice_size_in = sizeof (ALSAVoiceIn)
};
static void register_audio_alsa(void)
{
audio_driver_register(&alsa_audio_driver);
}
type_init(register_audio_alsa);

View File

@@ -21,15 +21,11 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "audio.h"
#include "monitor/monitor.h"
#include "qemu/timer.h"
#include "sysemu/sysemu.h"
#include "qemu/cutils.h"
#include "sysemu/replay.h"
#include "trace.h"
#define AUDIO_CAP "audio"
#include "audio_int.h"
@@ -46,49 +42,15 @@
The 1st one is the one used by default, that is the reason
that we generate the list.
*/
static const char *audio_prio_list[] = {
"spice",
static struct audio_driver *drvtab[] = {
#ifdef CONFIG_SPICE
&spice_audio_driver,
#endif
CONFIG_AUDIO_DRIVERS
"none",
"wav",
&no_audio_driver,
&wav_audio_driver
};
static QLIST_HEAD(, audio_driver) audio_drivers;
void audio_driver_register(audio_driver *drv)
{
QLIST_INSERT_HEAD(&audio_drivers, drv, next);
}
audio_driver *audio_driver_lookup(const char *name)
{
struct audio_driver *d;
QLIST_FOREACH(d, &audio_drivers, next) {
if (strcmp(name, d->name) == 0) {
return d;
}
}
audio_module_load_one(name);
QLIST_FOREACH(d, &audio_drivers, next) {
if (strcmp(name, d->name) == 0) {
return d;
}
}
return NULL;
}
static void audio_module_load_all(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(audio_prio_list); i++) {
audio_driver_lookup(audio_prio_list[i]);
}
}
struct fixed_settings {
int enabled;
int nb_voices;
@@ -336,8 +298,9 @@ static int audio_get_conf_int (const char *key, int defval, int *defaultp)
char *strval;
strval = getenv (key);
if (strval && !qemu_strtoi(strval, NULL, 10, &val)) {
if (strval) {
*defaultp = 0;
val = atoi (strval);
return val;
}
else {
@@ -458,12 +421,12 @@ static void audio_process_options (const char *prefix,
const char qemu_prefix[] = "QEMU_";
size_t preflen, optlen;
if (audio_bug(__func__, !prefix)) {
if (audio_bug (AUDIO_FUNC, !prefix)) {
dolog ("prefix = NULL\n");
return;
}
if (audio_bug(__func__, !opt)) {
if (audio_bug (AUDIO_FUNC, !opt)) {
dolog ("opt = NULL\n");
return;
}
@@ -826,7 +789,7 @@ static int audio_attach_capture (HWVoiceOut *hw)
SWVoiceOut *sw;
HWVoiceOut *hw_cap = &cap->hw;
sc = audio_calloc(__func__, 1, sizeof(*sc));
sc = audio_calloc (AUDIO_FUNC, 1, sizeof (*sc));
if (!sc) {
dolog ("Could not allocate soft capture voice (%zu bytes)\n",
sizeof (*sc));
@@ -882,7 +845,7 @@ static int audio_pcm_hw_find_min_in (HWVoiceIn *hw)
int audio_pcm_hw_get_live_in (HWVoiceIn *hw)
{
int live = hw->total_samples_captured - audio_pcm_hw_find_min_in (hw);
if (audio_bug(__func__, live < 0 || live > hw->samples)) {
if (audio_bug (AUDIO_FUNC, live < 0 || live > hw->samples)) {
dolog ("live=%d hw->samples=%d\n", live, hw->samples);
return 0;
}
@@ -920,7 +883,7 @@ static int audio_pcm_sw_get_rpos_in (SWVoiceIn *sw)
int live = hw->total_samples_captured - sw->total_hw_samples_acquired;
int rpos;
if (audio_bug(__func__, live < 0 || live > hw->samples)) {
if (audio_bug (AUDIO_FUNC, live < 0 || live > hw->samples)) {
dolog ("live=%d hw->samples=%d\n", live, hw->samples);
return 0;
}
@@ -943,7 +906,7 @@ int audio_pcm_sw_read (SWVoiceIn *sw, void *buf, int size)
rpos = audio_pcm_sw_get_rpos_in (sw) % hw->samples;
live = hw->total_samples_captured - sw->total_hw_samples_acquired;
if (audio_bug(__func__, live < 0 || live > hw->samples)) {
if (audio_bug (AUDIO_FUNC, live < 0 || live > hw->samples)) {
dolog ("live_in=%d hw->samples=%d\n", live, hw->samples);
return 0;
}
@@ -969,7 +932,7 @@ int audio_pcm_sw_read (SWVoiceIn *sw, void *buf, int size)
}
osamp = swlim;
if (audio_bug(__func__, osamp < 0)) {
if (audio_bug (AUDIO_FUNC, osamp < 0)) {
dolog ("osamp=%d\n", osamp);
return 0;
}
@@ -1024,7 +987,7 @@ static int audio_pcm_hw_get_live_out (HWVoiceOut *hw, int *nb_live)
if (nb_live1) {
int live = smin;
if (audio_bug(__func__, live < 0 || live > hw->samples)) {
if (audio_bug (AUDIO_FUNC, live < 0 || live > hw->samples)) {
dolog ("live=%d hw->samples=%d\n", live, hw->samples);
return 0;
}
@@ -1048,7 +1011,7 @@ int audio_pcm_sw_write (SWVoiceOut *sw, void *buf, int size)
hwsamples = sw->hw->samples;
live = sw->total_hw_samples_mixed;
if (audio_bug(__func__, live < 0 || live > hwsamples)) {
if (audio_bug (AUDIO_FUNC, live < 0 || live > hwsamples)){
dolog ("live=%d hw->samples=%d\n", live, hwsamples);
return 0;
}
@@ -1130,10 +1093,6 @@ static void audio_pcm_print_info (const char *cap, struct audio_pcm_info *info)
/*
* Timer
*/
static bool audio_timer_running;
static uint64_t audio_timer_last;
static int audio_is_timer_needed (void)
{
HWVoiceIn *hwi = NULL;
@@ -1151,33 +1110,16 @@ static int audio_is_timer_needed (void)
static void audio_reset_timer (AudioState *s)
{
if (audio_is_timer_needed ()) {
timer_mod_anticipate_ns(s->ts,
timer_mod (s->ts,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + conf.period.ticks);
if (!audio_timer_running) {
audio_timer_running = true;
audio_timer_last = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
trace_audio_timer_start(conf.period.ticks / SCALE_MS);
}
} else {
timer_del(s->ts);
if (audio_timer_running) {
audio_timer_running = false;
trace_audio_timer_stop();
}
}
else {
timer_del (s->ts);
}
}
static void audio_timer (void *opaque)
{
int64_t now, diff;
now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
diff = now - audio_timer_last;
if (diff > conf.period.ticks * 3 / 2) {
trace_audio_timer_delayed(diff / SCALE_MS);
}
audio_timer_last = now;
audio_run ("timer");
audio_reset_timer (opaque);
}
@@ -1187,6 +1129,8 @@ static void audio_timer (void *opaque)
*/
int AUD_write (SWVoiceOut *sw, void *buf, int size)
{
int bytes;
if (!sw) {
/* XXX: Consider options */
return size;
@@ -1197,11 +1141,14 @@ int AUD_write (SWVoiceOut *sw, void *buf, int size)
return 0;
}
return sw->hw->pcm_ops->write(sw, buf, size);
bytes = sw->hw->pcm_ops->write (sw, buf, size);
return bytes;
}
int AUD_read (SWVoiceIn *sw, void *buf, int size)
{
int bytes;
if (!sw) {
/* XXX: Consider options */
return size;
@@ -1212,7 +1159,8 @@ int AUD_read (SWVoiceIn *sw, void *buf, int size)
return 0;
}
return sw->hw->pcm_ops->read(sw, buf, size);
bytes = sw->hw->pcm_ops->read (sw, buf, size);
return bytes;
}
int AUD_get_buffer_size_out (SWVoiceOut *sw)
@@ -1318,7 +1266,7 @@ static int audio_get_avail (SWVoiceIn *sw)
}
live = sw->hw->total_samples_captured - sw->total_hw_samples_acquired;
if (audio_bug(__func__, live < 0 || live > sw->hw->samples)) {
if (audio_bug (AUDIO_FUNC, live < 0 || live > sw->hw->samples)) {
dolog ("live=%d sw->hw->samples=%d\n", live, sw->hw->samples);
return 0;
}
@@ -1342,7 +1290,7 @@ static int audio_get_free (SWVoiceOut *sw)
live = sw->total_hw_samples_mixed;
if (audio_bug(__func__, live < 0 || live > sw->hw->samples)) {
if (audio_bug (AUDIO_FUNC, live < 0 || live > sw->hw->samples)) {
dolog ("live=%d sw->hw->samples=%d\n", live, sw->hw->samples);
return 0;
}
@@ -1409,7 +1357,7 @@ static void audio_run_out (AudioState *s)
live = 0;
}
if (audio_bug(__func__, live < 0 || live > hw->samples)) {
if (audio_bug (AUDIO_FUNC, live < 0 || live > hw->samples)) {
dolog ("live=%d hw->samples=%d\n", live, hw->samples);
continue;
}
@@ -1443,8 +1391,7 @@ static void audio_run_out (AudioState *s)
prev_rpos = hw->rpos;
played = hw->pcm_ops->run_out (hw, live);
replay_audio_out(&played);
if (audio_bug(__func__, hw->rpos >= hw->samples)) {
if (audio_bug (AUDIO_FUNC, hw->rpos >= hw->samples)) {
dolog ("hw->rpos=%d hw->samples=%d played=%d\n",
hw->rpos, hw->samples, played);
hw->rpos = 0;
@@ -1465,7 +1412,7 @@ static void audio_run_out (AudioState *s)
continue;
}
if (audio_bug(__func__, played > sw->total_hw_samples_mixed)) {
if (audio_bug (AUDIO_FUNC, played > sw->total_hw_samples_mixed)) {
dolog ("played=%d sw->total_hw_samples_mixed=%d\n",
played, sw->total_hw_samples_mixed);
played = sw->total_hw_samples_mixed;
@@ -1507,12 +1454,9 @@ static void audio_run_in (AudioState *s)
while ((hw = audio_pcm_hw_find_any_enabled_in (hw))) {
SWVoiceIn *sw;
int captured = 0, min;
int captured, min;
if (replay_mode != REPLAY_MODE_PLAY) {
captured = hw->pcm_ops->run_in(hw);
}
replay_audio_in(&captured, hw->conv_buf, &hw->wpos, hw->samples);
captured = hw->pcm_ops->run_in (hw);
min = audio_pcm_hw_find_min_in (hw);
hw->total_samples_captured += captured - min;
@@ -1568,7 +1512,7 @@ static void audio_run_capture (AudioState *s)
continue;
}
if (audio_bug(__func__, captured > sw->total_hw_samples_mixed)) {
if (audio_bug (AUDIO_FUNC, captured > sw->total_hw_samples_mixed)) {
dolog ("captured=%d sw->total_hw_samples_mixed=%d\n",
captured, sw->total_hw_samples_mixed);
captured = sw->total_hw_samples_mixed;
@@ -1711,13 +1655,11 @@ static void audio_pp_nb_voices (const char *typ, int nb)
void AUD_help (void)
{
struct audio_driver *d;
/* make sure we print the help text for modular drivers too */
audio_module_load_all();
size_t i;
audio_process_options ("AUDIO", audio_options);
QLIST_FOREACH(d, &audio_drivers, next) {
for (i = 0; i < ARRAY_SIZE (drvtab); i++) {
struct audio_driver *d = drvtab[i];
if (d->options) {
audio_process_options (d->name, d->options);
}
@@ -1729,7 +1671,8 @@ void AUD_help (void)
printf ("Available drivers:\n");
QLIST_FOREACH(d, &audio_drivers, next) {
for (i = 0; i < ARRAY_SIZE (drvtab); i++) {
struct audio_driver *d = drvtab[i];
printf ("Name: %s\n", d->name);
printf ("Description: %s\n", d->descr);
@@ -1762,7 +1705,7 @@ void AUD_help (void)
);
}
static int audio_driver_init(AudioState *s, struct audio_driver *drv, bool msg)
static int audio_driver_init (AudioState *s, struct audio_driver *drv)
{
if (drv->options) {
audio_process_options (drv->name, drv->options);
@@ -1776,9 +1719,7 @@ static int audio_driver_init(AudioState *s, struct audio_driver *drv, bool msg)
return 0;
}
else {
if (msg) {
dolog("Could not init `%s' audio driver\n", drv->name);
}
dolog ("Could not init `%s' audio driver\n", drv->name);
return -1;
}
}
@@ -1802,21 +1743,13 @@ static void audio_vm_change_state_handler (void *opaque, int running,
audio_reset_timer (s);
}
static bool is_cleaning_up;
bool audio_is_cleaning_up(void)
{
return is_cleaning_up;
}
void audio_cleanup(void)
static void audio_atexit (void)
{
AudioState *s = &glob_audio_state;
HWVoiceOut *hwo, *hwon;
HWVoiceIn *hwi, *hwin;
HWVoiceOut *hwo = NULL;
HWVoiceIn *hwi = NULL;
is_cleaning_up = true;
QLIST_FOREACH_SAFE(hwo, &glob_audio_state.hw_head_out, entries, hwon) {
while ((hwo = audio_pcm_hw_find_any_out (hwo))) {
SWVoiceCap *sc;
if (hwo->enabled) {
@@ -1832,20 +1765,17 @@ void audio_cleanup(void)
cb->ops.destroy (cb->opaque);
}
}
QLIST_REMOVE(hwo, entries);
}
QLIST_FOREACH_SAFE(hwi, &glob_audio_state.hw_head_in, entries, hwin) {
while ((hwi = audio_pcm_hw_find_any_in (hwi))) {
if (hwi->enabled) {
hwi->pcm_ops->ctl_in (hwi, VOICE_DISABLE);
}
hwi->pcm_ops->fini_in (hwi);
QLIST_REMOVE(hwi, entries);
}
if (s->drv) {
s->drv->fini (s->drv_opaque);
s->drv = NULL;
}
}
@@ -1865,7 +1795,6 @@ static void audio_init (void)
const char *drvname;
VMChangeStateEntry *e;
AudioState *s = &glob_audio_state;
struct audio_driver *driver;
if (s->drv) {
return;
@@ -1874,9 +1803,12 @@ static void audio_init (void)
QLIST_INIT (&s->hw_head_out);
QLIST_INIT (&s->hw_head_in);
QLIST_INIT (&s->cap_head);
atexit(audio_cleanup);
atexit (audio_atexit);
s->ts = timer_new_ns(QEMU_CLOCK_VIRTUAL, audio_timer, s);
if (!s->ts) {
hw_error("Could not create audio timer\n");
}
audio_process_options ("AUDIO", audio_options);
@@ -1901,29 +1833,38 @@ static void audio_init (void)
}
if (drvname) {
driver = audio_driver_lookup(drvname);
if (driver) {
done = !audio_driver_init(s, driver, true);
} else {
int found = 0;
for (i = 0; i < ARRAY_SIZE (drvtab); i++) {
if (!strcmp (drvname, drvtab[i]->name)) {
done = !audio_driver_init (s, drvtab[i]);
found = 1;
break;
}
}
if (!found) {
dolog ("Unknown audio driver `%s'\n", drvname);
dolog ("Run with -audio-help to list available drivers\n");
}
}
if (!done) {
for (i = 0; !done && i < ARRAY_SIZE(audio_prio_list); i++) {
driver = audio_driver_lookup(audio_prio_list[i]);
if (driver && driver->can_be_default) {
done = !audio_driver_init(s, driver, false);
for (i = 0; !done && i < ARRAY_SIZE (drvtab); i++) {
if (drvtab[i]->can_be_default) {
done = !audio_driver_init (s, drvtab[i]);
}
}
}
if (!done) {
driver = audio_driver_lookup("none");
done = !audio_driver_init(s, driver, false);
assert(done);
dolog("warning: Using timer based audio emulation\n");
done = !audio_driver_init (s, &no_audio_driver);
if (!done) {
hw_error("Could not initialize audio subsystem\n");
}
else {
dolog ("warning: Using timer based audio emulation\n");
}
}
if (conf.period.hertz <= 0) {
@@ -1934,7 +1875,8 @@ static void audio_init (void)
}
conf.period.ticks = 1;
} else {
conf.period.ticks = NANOSECONDS_PER_SECOND / conf.period.hertz;
conf.period.ticks =
muldiv64 (1, get_ticks_per_sec (), conf.period.hertz);
}
e = qemu_add_vm_change_state_handler (audio_vm_change_state_handler, s);
@@ -1978,7 +1920,7 @@ CaptureVoiceOut *AUD_add_capture (
goto err0;
}
cb = audio_calloc(__func__, 1, sizeof(*cb));
cb = audio_calloc (AUDIO_FUNC, 1, sizeof (*cb));
if (!cb) {
dolog ("Could not allocate capture callback information, size %zu\n",
sizeof (*cb));
@@ -1996,7 +1938,7 @@ CaptureVoiceOut *AUD_add_capture (
HWVoiceOut *hw;
CaptureVoiceOut *cap;
cap = audio_calloc(__func__, 1, sizeof(*cap));
cap = audio_calloc (AUDIO_FUNC, 1, sizeof (*cap));
if (!cap) {
dolog ("Could not allocate capture voice, size %zu\n",
sizeof (*cap));
@@ -2009,8 +1951,8 @@ CaptureVoiceOut *AUD_add_capture (
/* XXX find a more elegant way */
hw->samples = 4096 * 4;
hw->mix_buf = audio_calloc(__func__, hw->samples,
sizeof(struct st_sample));
hw->mix_buf = audio_calloc (AUDIO_FUNC, hw->samples,
sizeof (struct st_sample));
if (!hw->mix_buf) {
dolog ("Could not allocate capture mix buffer (%d samples)\n",
hw->samples);
@@ -2019,7 +1961,7 @@ CaptureVoiceOut *AUD_add_capture (
audio_pcm_init_info (&hw->info, as);
cap->buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
cap->buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
if (!cap->buf) {
dolog ("Could not allocate capture buffer "
"(%d samples, each %d bytes)\n",
@@ -2036,7 +1978,8 @@ CaptureVoiceOut *AUD_add_capture (
QLIST_INSERT_HEAD (&s->cap_head, cap, entries);
QLIST_INSERT_HEAD (&cap->cb_head, cb, entries);
QLIST_FOREACH(hw, &glob_audio_state.hw_head_out, entries) {
hw = NULL;
while ((hw = audio_pcm_hw_find_any_out (hw))) {
audio_attach_capture (hw);
}
return cap;
@@ -2082,8 +2025,6 @@ void AUD_del_capture (CaptureVoiceOut *cap, void *cb_opaque)
sw = sw1;
}
QLIST_REMOVE (cap, entries);
g_free (cap->hw.mix_buf);
g_free (cap->buf);
g_free (cap);
}
return;

View File

@@ -21,10 +21,10 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef QEMU_AUDIO_H
#define QEMU_AUDIO_H
#include "config-host.h"
#include "qemu/queue.h"
typedef void (*audio_callback_fn) (void *opaque, int avail);
@@ -163,12 +163,4 @@ static inline void *advance (void *p, int incr)
int wav_start_capture (CaptureState *s, const char *path, int freq,
int bits, int nchannels);
bool audio_is_cleaning_up(void);
void audio_cleanup(void);
void audio_sample_to_uint64(void *samples, int pos,
uint64_t *left, uint64_t *right);
void audio_sample_from_uint64(void *samples, int pos,
uint64_t left, uint64_t right);
#endif /* QEMU_AUDIO_H */
#endif /* audio.h */

View File

@@ -21,11 +21,10 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef QEMU_AUDIO_INT_H
#define QEMU_AUDIO_INT_H
#ifdef CONFIG_AUDIO_COREAUDIO
#ifdef CONFIG_COREAUDIO
#define FLOAT_MIXENG
/* #define RECIPROCAL */
#endif
@@ -141,7 +140,6 @@ struct SWVoiceIn {
QLIST_ENTRY (SWVoiceIn) entries;
};
typedef struct audio_driver audio_driver;
struct audio_driver {
const char *name;
const char *descr;
@@ -155,7 +153,6 @@ struct audio_driver {
int voice_size_out;
int voice_size_in;
int ctl_caps;
QLIST_ENTRY(audio_driver) next;
};
struct audio_pcm_ops {
@@ -191,7 +188,7 @@ struct SWVoiceCap {
QLIST_ENTRY (SWVoiceCap) entries;
};
typedef struct AudioState {
struct AudioState {
struct audio_driver *drv;
void *drv_opaque;
@@ -203,13 +200,19 @@ typedef struct AudioState {
int nb_hw_voices_out;
int nb_hw_voices_in;
int vm_running;
} AudioState;
};
extern struct audio_driver no_audio_driver;
extern struct audio_driver oss_audio_driver;
extern struct audio_driver sdl_audio_driver;
extern struct audio_driver wav_audio_driver;
extern struct audio_driver alsa_audio_driver;
extern struct audio_driver coreaudio_audio_driver;
extern struct audio_driver dsound_audio_driver;
extern struct audio_driver pa_audio_driver;
extern struct audio_driver spice_audio_driver;
extern const struct mixeng_volume nominal_volume;
void audio_driver_register(audio_driver *drv);
audio_driver *audio_driver_lookup(const char *name);
void audio_pcm_init_info (struct audio_pcm_info *info, struct audsettings *as);
void audio_pcm_info_clear_buf (struct audio_pcm_info *info, void *buf, int len);
@@ -248,4 +251,10 @@ static inline int audio_ring_dist (int dst, int src, int len)
#define AUDIO_STRINGIFY_(n) #n
#define AUDIO_STRINGIFY(n) AUDIO_STRINGIFY_(n)
#endif /* QEMU_AUDIO_INT_H */
#if defined _MSC_VER || defined __GNUC__
#define AUDIO_FUNC __FUNCTION__
#else
#define AUDIO_FUNC __FILE__ ":" AUDIO_STRINGIFY (__LINE__)
#endif
#endif /* audio_int.h */

View File

@@ -1,4 +1,3 @@
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "audio.h"
@@ -31,7 +30,7 @@ int audio_pt_init (struct audio_pt *p, void *(*func) (void *),
err = sigfillset (&set);
if (err) {
logerr(p, errno, "%s(%s): sigfillset failed", cap, __func__);
logerr (p, errno, "%s(%s): sigfillset failed", cap, AUDIO_FUNC);
return -1;
}
@@ -57,8 +56,8 @@ int audio_pt_init (struct audio_pt *p, void *(*func) (void *),
err2 = pthread_sigmask (SIG_SETMASK, &old_set, NULL);
if (err2) {
logerr(p, err2, "%s(%s): pthread_sigmask (restore) failed",
cap, __func__);
logerr (p, err2, "%s(%s): pthread_sigmask (restore) failed",
cap, AUDIO_FUNC);
/* We have failed to restore original signal mask, all bets are off,
so terminate the process */
exit (EXIT_FAILURE);
@@ -74,17 +73,17 @@ int audio_pt_init (struct audio_pt *p, void *(*func) (void *),
err2:
err2 = pthread_cond_destroy (&p->cond);
if (err2) {
logerr(p, err2, "%s(%s): pthread_cond_destroy failed", cap, __func__);
logerr (p, err2, "%s(%s): pthread_cond_destroy failed", cap, AUDIO_FUNC);
}
err1:
err2 = pthread_mutex_destroy (&p->mutex);
if (err2) {
logerr(p, err2, "%s(%s): pthread_mutex_destroy failed", cap, __func__);
logerr (p, err2, "%s(%s): pthread_mutex_destroy failed", cap, AUDIO_FUNC);
}
err0:
logerr(p, err, "%s(%s): %s failed", cap, __func__, efunc);
logerr (p, err, "%s(%s): %s failed", cap, AUDIO_FUNC, efunc);
return -1;
}
@@ -94,13 +93,13 @@ int audio_pt_fini (struct audio_pt *p, const char *cap)
err = pthread_cond_destroy (&p->cond);
if (err) {
logerr(p, err, "%s(%s): pthread_cond_destroy failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_cond_destroy failed", cap, AUDIO_FUNC);
ret = -1;
}
err = pthread_mutex_destroy (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_destroy failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_mutex_destroy failed", cap, AUDIO_FUNC);
ret = -1;
}
return ret;
@@ -112,7 +111,7 @@ int audio_pt_lock (struct audio_pt *p, const char *cap)
err = pthread_mutex_lock (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_lock failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_mutex_lock failed", cap, AUDIO_FUNC);
return -1;
}
return 0;
@@ -124,7 +123,7 @@ int audio_pt_unlock (struct audio_pt *p, const char *cap)
err = pthread_mutex_unlock (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_unlock failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_mutex_unlock failed", cap, AUDIO_FUNC);
return -1;
}
return 0;
@@ -136,7 +135,7 @@ int audio_pt_wait (struct audio_pt *p, const char *cap)
err = pthread_cond_wait (&p->cond, &p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_cond_wait failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_cond_wait failed", cap, AUDIO_FUNC);
return -1;
}
return 0;
@@ -148,12 +147,12 @@ int audio_pt_unlock_and_signal (struct audio_pt *p, const char *cap)
err = pthread_mutex_unlock (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_unlock failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_mutex_unlock failed", cap, AUDIO_FUNC);
return -1;
}
err = pthread_cond_signal (&p->cond);
if (err) {
logerr(p, err, "%s(%s): pthread_cond_signal failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_cond_signal failed", cap, AUDIO_FUNC);
return -1;
}
return 0;
@@ -166,7 +165,7 @@ int audio_pt_join (struct audio_pt *p, void **arg, const char *cap)
err = pthread_join (p->thread, &ret);
if (err) {
logerr(p, err, "%s(%s): pthread_join failed", cap, __func__);
logerr (p, err, "%s(%s): pthread_join failed", cap, AUDIO_FUNC);
return -1;
}
*arg = ret;

View File

@@ -19,4 +19,4 @@ int audio_pt_wait (struct audio_pt *, const char *);
int audio_pt_unlock_and_signal (struct audio_pt *, const char *);
int audio_pt_join (struct audio_pt *, void **, const char *);
#endif /* QEMU_AUDIO_PT_INT_H */
#endif /* audio_pt_int.h */

View File

@@ -57,13 +57,13 @@ static void glue (audio_init_nb_voices_, TYPE) (struct audio_driver *drv)
glue (s->nb_hw_voices_, TYPE) = max_voices;
}
if (audio_bug(__func__, !voice_size && max_voices)) {
if (audio_bug (AUDIO_FUNC, !voice_size && max_voices)) {
dolog ("drv=`%s' voice_size=0 max_voices=%d\n",
drv->name, max_voices);
glue (s->nb_hw_voices_, TYPE) = 0;
}
if (audio_bug(__func__, voice_size && !max_voices)) {
if (audio_bug (AUDIO_FUNC, voice_size && !max_voices)) {
dolog ("drv=`%s' voice_size=%d max_voices=0\n",
drv->name, voice_size);
}
@@ -77,7 +77,7 @@ static void glue (audio_pcm_hw_free_resources_, TYPE) (HW *hw)
static int glue (audio_pcm_hw_alloc_resources_, TYPE) (HW *hw)
{
HWBUF = audio_calloc(__func__, hw->samples, sizeof(struct st_sample));
HWBUF = audio_calloc (AUDIO_FUNC, hw->samples, sizeof (struct st_sample));
if (!HWBUF) {
dolog ("Could not allocate " NAME " buffer (%d samples)\n",
hw->samples);
@@ -105,7 +105,7 @@ static int glue (audio_pcm_sw_alloc_resources_, TYPE) (SW *sw)
samples = ((int64_t) sw->hw->samples << 32) / sw->ratio;
sw->buf = audio_calloc(__func__, samples, sizeof(struct st_sample));
sw->buf = audio_calloc (AUDIO_FUNC, samples, sizeof (struct st_sample));
if (!sw->buf) {
dolog ("Could not allocate buffer for `%s' (%d samples)\n",
SW_NAME (sw), samples);
@@ -238,17 +238,17 @@ static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
return NULL;
}
if (audio_bug(__func__, !drv)) {
if (audio_bug (AUDIO_FUNC, !drv)) {
dolog ("No host audio driver\n");
return NULL;
}
if (audio_bug(__func__, !drv->pcm_ops)) {
if (audio_bug (AUDIO_FUNC, !drv->pcm_ops)) {
dolog ("Host audio driver without pcm_ops\n");
return NULL;
}
hw = audio_calloc(__func__, 1, glue(drv->voice_size_, TYPE));
hw = audio_calloc (AUDIO_FUNC, 1, glue (drv->voice_size_, TYPE));
if (!hw) {
dolog ("Can not allocate voice `%s' size %d\n",
drv->name, glue (drv->voice_size_, TYPE));
@@ -266,7 +266,7 @@ static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
goto err0;
}
if (audio_bug(__func__, hw->samples <= 0)) {
if (audio_bug (AUDIO_FUNC, hw->samples <= 0)) {
dolog ("hw->samples=%d\n", hw->samples);
goto err1;
}
@@ -339,7 +339,7 @@ static SW *glue (audio_pcm_create_voice_pair_, TYPE) (
hw_as = *as;
}
sw = audio_calloc(__func__, 1, sizeof(*sw));
sw = audio_calloc (AUDIO_FUNC, 1, sizeof (*sw));
if (!sw) {
dolog ("Could not allocate soft voice `%s' (%zu bytes)\n",
sw_name ? sw_name : "unknown", sizeof (*sw));
@@ -379,7 +379,7 @@ static void glue (audio_close_, TYPE) (SW *sw)
void glue (AUD_close_, TYPE) (QEMUSoundCard *card, SW *sw)
{
if (sw) {
if (audio_bug(__func__, !card)) {
if (audio_bug (AUDIO_FUNC, !card)) {
dolog ("card=%p\n", card);
return;
}
@@ -399,7 +399,7 @@ SW *glue (AUD_open_, TYPE) (
{
AudioState *s = &glob_audio_state;
if (audio_bug(__func__, !card || !name || !callback_fn || !as)) {
if (audio_bug (AUDIO_FUNC, !card || !name || !callback_fn || !as)) {
dolog ("card=%p name=%p callback_fn=%p as=%p\n",
card, name, callback_fn, as);
goto fail;
@@ -408,12 +408,12 @@ SW *glue (AUD_open_, TYPE) (
ldebug ("open %s, freq %d, nchannels %d, fmt %d\n",
name, as->freq, as->nchannels, as->fmt);
if (audio_bug(__func__, audio_validate_settings(as))) {
if (audio_bug (AUDIO_FUNC, audio_validate_settings (as))) {
audio_print_settings (as);
goto fail;
}
if (audio_bug(__func__, !s->drv)) {
if (audio_bug (AUDIO_FUNC, !s->drv)) {
dolog ("Can not open `%s' (no host audio driver)\n", name);
goto fail;
}

View File

@@ -1,6 +1,5 @@
/* public domain */
#include "qemu/osdep.h"
#include "qemu-common.h"
#define AUDIO_CAP "win-int"

View File

@@ -22,8 +22,8 @@
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <CoreAudio/CoreAudio.h>
#include <string.h> /* strerror */
#include <pthread.h> /* pthread_X */
#include "qemu-common.h"
@@ -32,9 +32,7 @@
#define AUDIO_CAP "coreaudio"
#include "audio_int.h"
#ifndef MAC_OS_X_VERSION_10_6
#define MAC_OS_X_VERSION_10_6 1060
#endif
static int isAtexit;
typedef struct {
int buffer_frames;
@@ -47,233 +45,11 @@ typedef struct coreaudioVoiceOut {
AudioDeviceID outputDeviceID;
UInt32 audioDevicePropertyBufferFrameSize;
AudioStreamBasicDescription outputStreamBasicDescription;
AudioDeviceIOProcID ioprocid;
int live;
int decr;
int rpos;
} coreaudioVoiceOut;
#if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_6
/* The APIs used here only become available from 10.6 */
static OSStatus coreaudio_get_voice(AudioDeviceID *id)
{
UInt32 size = sizeof(*id);
AudioObjectPropertyAddress addr = {
kAudioHardwarePropertyDefaultOutputDevice,
kAudioObjectPropertyScopeGlobal,
kAudioObjectPropertyElementMaster
};
return AudioObjectGetPropertyData(kAudioObjectSystemObject,
&addr,
0,
NULL,
&size,
id);
}
static OSStatus coreaudio_get_framesizerange(AudioDeviceID id,
AudioValueRange *framerange)
{
UInt32 size = sizeof(*framerange);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyBufferFrameSizeRange,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectGetPropertyData(id,
&addr,
0,
NULL,
&size,
framerange);
}
static OSStatus coreaudio_get_framesize(AudioDeviceID id, UInt32 *framesize)
{
UInt32 size = sizeof(*framesize);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyBufferFrameSize,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectGetPropertyData(id,
&addr,
0,
NULL,
&size,
framesize);
}
static OSStatus coreaudio_set_framesize(AudioDeviceID id, UInt32 *framesize)
{
UInt32 size = sizeof(*framesize);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyBufferFrameSize,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectSetPropertyData(id,
&addr,
0,
NULL,
size,
framesize);
}
static OSStatus coreaudio_get_streamformat(AudioDeviceID id,
AudioStreamBasicDescription *d)
{
UInt32 size = sizeof(*d);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyStreamFormat,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectGetPropertyData(id,
&addr,
0,
NULL,
&size,
d);
}
static OSStatus coreaudio_set_streamformat(AudioDeviceID id,
AudioStreamBasicDescription *d)
{
UInt32 size = sizeof(*d);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyStreamFormat,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectSetPropertyData(id,
&addr,
0,
NULL,
size,
d);
}
static OSStatus coreaudio_get_isrunning(AudioDeviceID id, UInt32 *result)
{
UInt32 size = sizeof(*result);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyDeviceIsRunning,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectGetPropertyData(id,
&addr,
0,
NULL,
&size,
result);
}
#else
/* Legacy versions of functions using deprecated APIs */
static OSStatus coreaudio_get_voice(AudioDeviceID *id)
{
UInt32 size = sizeof(*id);
return AudioHardwareGetProperty(
kAudioHardwarePropertyDefaultOutputDevice,
&size,
id);
}
static OSStatus coreaudio_get_framesizerange(AudioDeviceID id,
AudioValueRange *framerange)
{
UInt32 size = sizeof(*framerange);
return AudioDeviceGetProperty(
id,
0,
0,
kAudioDevicePropertyBufferFrameSizeRange,
&size,
framerange);
}
static OSStatus coreaudio_get_framesize(AudioDeviceID id, UInt32 *framesize)
{
UInt32 size = sizeof(*framesize);
return AudioDeviceGetProperty(
id,
0,
false,
kAudioDevicePropertyBufferFrameSize,
&size,
framesize);
}
static OSStatus coreaudio_set_framesize(AudioDeviceID id, UInt32 *framesize)
{
UInt32 size = sizeof(*framesize);
return AudioDeviceSetProperty(
id,
NULL,
0,
false,
kAudioDevicePropertyBufferFrameSize,
size,
framesize);
}
static OSStatus coreaudio_get_streamformat(AudioDeviceID id,
AudioStreamBasicDescription *d)
{
UInt32 size = sizeof(*d);
return AudioDeviceGetProperty(
id,
0,
false,
kAudioDevicePropertyStreamFormat,
&size,
d);
}
static OSStatus coreaudio_set_streamformat(AudioDeviceID id,
AudioStreamBasicDescription *d)
{
UInt32 size = sizeof(*d);
return AudioDeviceSetProperty(
id,
0,
0,
0,
kAudioDevicePropertyStreamFormat,
size,
d);
}
static OSStatus coreaudio_get_isrunning(AudioDeviceID id, UInt32 *result)
{
UInt32 size = sizeof(*result);
return AudioDeviceGetProperty(
id,
0,
0,
kAudioDevicePropertyDeviceIsRunning,
&size,
result);
}
#endif
static void coreaudio_logstatus (OSStatus status)
{
const char *str = "BUG";
@@ -368,7 +144,10 @@ static inline UInt32 isPlaying (AudioDeviceID outputDeviceID)
{
OSStatus status;
UInt32 result = 0;
status = coreaudio_get_isrunning(outputDeviceID, &result);
UInt32 propertySize = sizeof(outputDeviceID);
status = AudioDeviceGetProperty(
outputDeviceID, 0, 0,
kAudioDevicePropertyDeviceIsRunning, &propertySize, &result);
if (status != kAudioHardwareNoError) {
coreaudio_logerr(status,
"Could not determine whether Device is playing\n");
@@ -376,6 +155,11 @@ static inline UInt32 isPlaying (AudioDeviceID outputDeviceID)
return result;
}
static void coreaudio_atexit (void)
{
isAtexit = 1;
}
static int coreaudio_lock (coreaudioVoiceOut *core, const char *fn_name)
{
int err;
@@ -504,6 +288,7 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
{
OSStatus status;
coreaudioVoiceOut *core = (coreaudioVoiceOut *) hw;
UInt32 propertySize;
int err;
const char *typ = "playback";
AudioValueRange frameRange;
@@ -518,7 +303,12 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
audio_pcm_init_info (&hw->info, as);
status = coreaudio_get_voice(&core->outputDeviceID);
/* open default output device */
propertySize = sizeof(core->outputDeviceID);
status = AudioHardwareGetProperty(
kAudioHardwarePropertyDefaultOutputDevice,
&propertySize,
&core->outputDeviceID);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ,
"Could not get default output Device\n");
@@ -530,8 +320,14 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
}
/* get minimum and maximum buffer frame sizes */
status = coreaudio_get_framesizerange(core->outputDeviceID,
&frameRange);
propertySize = sizeof(frameRange);
status = AudioDeviceGetProperty(
core->outputDeviceID,
0,
0,
kAudioDevicePropertyBufferFrameSizeRange,
&propertySize,
&frameRange);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ,
"Could not get device buffer frame range\n");
@@ -551,8 +347,15 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
}
/* set Buffer Frame Size */
status = coreaudio_set_framesize(core->outputDeviceID,
&core->audioDevicePropertyBufferFrameSize);
propertySize = sizeof(core->audioDevicePropertyBufferFrameSize);
status = AudioDeviceSetProperty(
core->outputDeviceID,
NULL,
0,
false,
kAudioDevicePropertyBufferFrameSize,
propertySize,
&core->audioDevicePropertyBufferFrameSize);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ,
"Could not set device buffer frame size %" PRIu32 "\n",
@@ -561,8 +364,14 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
}
/* get Buffer Frame Size */
status = coreaudio_get_framesize(core->outputDeviceID,
&core->audioDevicePropertyBufferFrameSize);
propertySize = sizeof(core->audioDevicePropertyBufferFrameSize);
status = AudioDeviceGetProperty(
core->outputDeviceID,
0,
false,
kAudioDevicePropertyBufferFrameSize,
&propertySize,
&core->audioDevicePropertyBufferFrameSize);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ,
"Could not get device buffer frame size\n");
@@ -571,8 +380,14 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
hw->samples = conf->nbuffers * core->audioDevicePropertyBufferFrameSize;
/* get StreamFormat */
status = coreaudio_get_streamformat(core->outputDeviceID,
&core->outputStreamBasicDescription);
propertySize = sizeof(core->outputStreamBasicDescription);
status = AudioDeviceGetProperty(
core->outputDeviceID,
0,
false,
kAudioDevicePropertyStreamFormat,
&propertySize,
&core->outputStreamBasicDescription);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ,
"Could not get Device Stream properties\n");
@@ -582,8 +397,15 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
/* set Samplerate */
core->outputStreamBasicDescription.mSampleRate = (Float64) as->freq;
status = coreaudio_set_streamformat(core->outputDeviceID,
&core->outputStreamBasicDescription);
propertySize = sizeof(core->outputStreamBasicDescription);
status = AudioDeviceSetProperty(
core->outputDeviceID,
0,
0,
0,
kAudioDevicePropertyStreamFormat,
propertySize,
&core->outputStreamBasicDescription);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ, "Could not set samplerate %d\n",
as->freq);
@@ -592,12 +414,8 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
}
/* set Callback */
core->ioprocid = NULL;
status = AudioDeviceCreateIOProcID(core->outputDeviceID,
audioDeviceIOProc,
hw,
&core->ioprocid);
if (status != kAudioHardwareNoError || core->ioprocid == NULL) {
status = AudioDeviceAddIOProc(core->outputDeviceID, audioDeviceIOProc, hw);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ, "Could not set IOProc\n");
core->outputDeviceID = kAudioDeviceUnknown;
return -1;
@@ -605,10 +423,10 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
/* start Playback */
if (!isPlaying(core->outputDeviceID)) {
status = AudioDeviceStart(core->outputDeviceID, core->ioprocid);
status = AudioDeviceStart(core->outputDeviceID, audioDeviceIOProc);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ, "Could not start playback\n");
AudioDeviceDestroyIOProcID(core->outputDeviceID, core->ioprocid);
AudioDeviceRemoveIOProc(core->outputDeviceID, audioDeviceIOProc);
core->outputDeviceID = kAudioDeviceUnknown;
return -1;
}
@@ -623,18 +441,18 @@ static void coreaudio_fini_out (HWVoiceOut *hw)
int err;
coreaudioVoiceOut *core = (coreaudioVoiceOut *) hw;
if (!audio_is_cleaning_up()) {
if (!isAtexit) {
/* stop playback */
if (isPlaying(core->outputDeviceID)) {
status = AudioDeviceStop(core->outputDeviceID, core->ioprocid);
status = AudioDeviceStop(core->outputDeviceID, audioDeviceIOProc);
if (status != kAudioHardwareNoError) {
coreaudio_logerr (status, "Could not stop playback\n");
}
}
/* remove callback */
status = AudioDeviceDestroyIOProcID(core->outputDeviceID,
core->ioprocid);
status = AudioDeviceRemoveIOProc(core->outputDeviceID,
audioDeviceIOProc);
if (status != kAudioHardwareNoError) {
coreaudio_logerr (status, "Could not remove IOProc\n");
}
@@ -657,7 +475,7 @@ static int coreaudio_ctl_out (HWVoiceOut *hw, int cmd, ...)
case VOICE_ENABLE:
/* start playback */
if (!isPlaying(core->outputDeviceID)) {
status = AudioDeviceStart(core->outputDeviceID, core->ioprocid);
status = AudioDeviceStart(core->outputDeviceID, audioDeviceIOProc);
if (status != kAudioHardwareNoError) {
coreaudio_logerr (status, "Could not resume playback\n");
}
@@ -666,10 +484,9 @@ static int coreaudio_ctl_out (HWVoiceOut *hw, int cmd, ...)
case VOICE_DISABLE:
/* stop playback */
if (!audio_is_cleaning_up()) {
if (!isAtexit) {
if (isPlaying(core->outputDeviceID)) {
status = AudioDeviceStop(core->outputDeviceID,
core->ioprocid);
status = AudioDeviceStop(core->outputDeviceID, audioDeviceIOProc);
if (status != kAudioHardwareNoError) {
coreaudio_logerr (status, "Could not pause playback\n");
}
@@ -690,6 +507,7 @@ static void *coreaudio_audio_init (void)
CoreaudioConf *conf = g_malloc(sizeof(CoreaudioConf));
*conf = glob_conf;
atexit(coreaudio_atexit);
return conf;
}
@@ -722,7 +540,7 @@ static struct audio_pcm_ops coreaudio_pcm_ops = {
.ctl_out = coreaudio_ctl_out
};
static struct audio_driver coreaudio_audio_driver = {
struct audio_driver coreaudio_audio_driver = {
.name = "coreaudio",
.descr = "CoreAudio http://developer.apple.com/audio/coreaudio.html",
.options = coreaudio_options,
@@ -735,9 +553,3 @@ static struct audio_driver coreaudio_audio_driver = {
.voice_size_out = sizeof (coreaudioVoiceOut),
.voice_size_in = 0
};
static void register_audio_coreaudio(void)
{
audio_driver_register(&coreaudio_audio_driver);
}
type_init(register_audio_coreaudio);

View File

@@ -26,7 +26,6 @@
* SEAL 1.07 by Carlos 'pel' Hasan was used as documentation
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "audio.h"
@@ -543,7 +542,7 @@ static int dsound_run_out (HWVoiceOut *hw, int live)
}
}
if (audio_bug(__func__, len < 0 || len > bufsize)) {
if (audio_bug (AUDIO_FUNC, len < 0 || len > bufsize)) {
dolog ("len=%d bufsize=%d old_pos=%ld ppos=%ld\n",
len, bufsize, old_pos, ppos);
return 0;
@@ -890,7 +889,7 @@ static struct audio_pcm_ops dsound_pcm_ops = {
.ctl_in = dsound_ctl_in
};
static struct audio_driver dsound_audio_driver = {
struct audio_driver dsound_audio_driver = {
.name = "dsound",
.descr = "DirectSound http://wikipedia.org/wiki/DirectSound",
.options = dsound_options,
@@ -903,9 +902,3 @@ static struct audio_driver dsound_audio_driver = {
.voice_size_out = sizeof (DSoundVoiceOut),
.voice_size_in = sizeof (DSoundVoiceIn)
};
static void register_audio_dsound(void)
{
audio_driver_register(&dsound_audio_driver);
}
type_init(register_audio_dsound);

View File

@@ -22,10 +22,7 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/bswap.h"
#include "qemu/error-report.h"
#include "audio.h"
#define AUDIO_CAP "mixeng"
@@ -268,42 +265,11 @@ f_sample *mixeng_clip[2][2][2][3] = {
}
};
void audio_sample_to_uint64(void *samples, int pos,
uint64_t *left, uint64_t *right)
{
struct st_sample *sample = samples;
sample += pos;
#ifdef FLOAT_MIXENG
error_report(
"Coreaudio and floating point samples are not supported by replay yet");
abort();
#else
*left = sample->l;
*right = sample->r;
#endif
}
void audio_sample_from_uint64(void *samples, int pos,
uint64_t left, uint64_t right)
{
struct st_sample *sample = samples;
sample += pos;
#ifdef FLOAT_MIXENG
error_report(
"Coreaudio and floating point samples are not supported by replay yet");
abort();
#else
sample->l = left;
sample->r = right;
#endif
}
/*
* August 21, 1998
* Copyright 1998 Fabrice Bellard.
*
* [Rewrote completely the code of Lance Norskog And Sundry
* [Rewrote completly the code of Lance Norskog And Sundry
* Contributors with a more efficient algorithm.]
*
* This source code is freely redistributable and may be used for
@@ -344,7 +310,7 @@ struct rate {
*/
void *st_rate_start (int inrate, int outrate)
{
struct rate *rate = audio_calloc(__func__, 1, sizeof(*rate));
struct rate *rate = audio_calloc (AUDIO_FUNC, 1, sizeof (*rate));
if (!rate) {
dolog ("Could not allocate resampler (%zu bytes)\n", sizeof (*rate));

View File

@@ -21,7 +21,6 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef QEMU_MIXENG_H
#define QEMU_MIXENG_H
@@ -49,4 +48,4 @@ void st_rate_stop (void *opaque);
void mixeng_clear (struct st_sample *buf, int len);
void mixeng_volume (struct st_sample *buf, int len, struct mixeng_volume *vol);
#endif /* QEMU_MIXENG_H */
#endif /* mixeng.h */

View File

@@ -21,9 +21,7 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/host-utils.h"
#include "audio.h"
#include "qemu/timer.h"
@@ -50,8 +48,8 @@ static int no_run_out (HWVoiceOut *hw, int live)
now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
ticks = now - no->old_ticks;
bytes = muldiv64(ticks, hw->info.bytes_per_second, NANOSECONDS_PER_SECOND);
bytes = audio_MIN(bytes, INT_MAX);
bytes = muldiv64 (ticks, hw->info.bytes_per_second, get_ticks_per_sec ());
bytes = audio_MIN (bytes, INT_MAX);
samples = bytes >> hw->info.shift;
no->old_ticks = now;
@@ -62,7 +60,7 @@ static int no_run_out (HWVoiceOut *hw, int live)
static int no_write (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write(sw, buf, len);
return audio_pcm_sw_write (sw, buf, len);
}
static int no_init_out(HWVoiceOut *hw, struct audsettings *as, void *drv_opaque)
@@ -107,7 +105,7 @@ static int no_run_in (HWVoiceIn *hw)
int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
int64_t ticks = now - no->old_ticks;
int64_t bytes =
muldiv64(ticks, hw->info.bytes_per_second, NANOSECONDS_PER_SECOND);
muldiv64 (ticks, hw->info.bytes_per_second, get_ticks_per_sec ());
no->old_ticks = now;
bytes = audio_MIN (bytes, INT_MAX);
@@ -160,7 +158,7 @@ static struct audio_pcm_ops no_pcm_ops = {
.ctl_in = no_ctl_in
};
static struct audio_driver no_audio_driver = {
struct audio_driver no_audio_driver = {
.name = "none",
.descr = "Timer based audio emulation",
.options = NULL,
@@ -173,9 +171,3 @@ static struct audio_driver no_audio_driver = {
.voice_size_out = sizeof (NoVoiceOut),
.voice_size_in = sizeof (NoVoiceIn)
};
static void register_audio_none(void)
{
audio_driver_register(&no_audio_driver);
}
type_init(register_audio_none);

View File

@@ -21,7 +21,9 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <stdlib.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/soundcard.h>
#include "qemu-common.h"
@@ -582,9 +584,11 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
}
if (!oss->mmapped) {
oss->pcm_buf = audio_calloc(__func__,
hw->samples,
1 << hw->info.shift);
oss->pcm_buf = audio_calloc (
AUDIO_FUNC,
hw->samples,
1 << hw->info.shift
);
if (!oss->pcm_buf) {
dolog (
"Could not allocate DAC buffer (%d samples, each %d bytes)\n",
@@ -703,7 +707,7 @@ static int oss_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
}
hw->samples = (obt.nfrags * obt.fragsize) >> hw->info.shift;
oss->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
oss->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
if (!oss->pcm_buf) {
dolog ("Could not allocate ADC buffer (%d samples, each %d bytes)\n",
hw->samples, 1 << hw->info.shift);
@@ -895,7 +899,7 @@ static struct audio_option oss_options[] = {
.name = "EXCLUSIVE",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.exclusive,
.descr = "Open device in exclusive mode (vmix won't work)"
.descr = "Open device in exclusive mode (vmix wont work)"
},
#ifdef USE_DSP_POLICY
{
@@ -922,7 +926,7 @@ static struct audio_pcm_ops oss_pcm_ops = {
.ctl_in = oss_ctl_in
};
static struct audio_driver oss_audio_driver = {
struct audio_driver oss_audio_driver = {
.name = "oss",
.descr = "OSS http://www.opensound.com",
.options = oss_options,
@@ -935,9 +939,3 @@ static struct audio_driver oss_audio_driver = {
.voice_size_out = sizeof (OSSVoiceOut),
.voice_size_in = sizeof (OSSVoiceIn)
};
static void register_audio_oss(void)
{
audio_driver_register(&oss_audio_driver);
}
type_init(register_audio_oss);

View File

@@ -1,5 +1,4 @@
/* public domain */
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "audio.h"
@@ -89,7 +88,7 @@ static inline int PA_STREAM_IS_GOOD(pa_stream_state_t x)
} \
goto label; \
} \
} while (0)
} while (0);
#define CHECK_DEAD_GOTO(c, stream, rerror, label) \
do { \
@@ -107,7 +106,7 @@ static inline int PA_STREAM_IS_GOOD(pa_stream_state_t x)
} \
goto label; \
} \
} while (0)
} while (0);
static int qpa_simple_read (PAVoiceIn *p, void *data, size_t length, int *rerror)
{
@@ -206,7 +205,7 @@ static void *qpa_thread_out (void *arg)
PAVoiceOut *pa = arg;
HWVoiceOut *hw = &pa->hw;
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -222,15 +221,15 @@ static void *qpa_thread_out (void *arg)
break;
}
if (audio_pt_wait(&pa->pt, __func__)) {
if (audio_pt_wait (&pa->pt, AUDIO_FUNC)) {
goto exit;
}
}
decr = to_mix = audio_MIN(pa->live, pa->g->conf.samples >> 5);
decr = to_mix = audio_MIN (pa->live, pa->g->conf.samples >> 2);
rpos = pa->rpos;
if (audio_pt_unlock(&pa->pt, __func__)) {
if (audio_pt_unlock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -251,7 +250,7 @@ static void *qpa_thread_out (void *arg)
to_mix -= chunk;
}
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -261,7 +260,7 @@ static void *qpa_thread_out (void *arg)
}
exit:
audio_pt_unlock(&pa->pt, __func__);
audio_pt_unlock (&pa->pt, AUDIO_FUNC);
return NULL;
}
@@ -270,7 +269,7 @@ static int qpa_run_out (HWVoiceOut *hw, int live)
int decr;
PAVoiceOut *pa = (PAVoiceOut *) hw;
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return 0;
}
@@ -279,10 +278,10 @@ static int qpa_run_out (HWVoiceOut *hw, int live)
pa->live = live - decr;
hw->rpos = pa->rpos;
if (pa->live > 0) {
audio_pt_unlock_and_signal(&pa->pt, __func__);
audio_pt_unlock_and_signal (&pa->pt, AUDIO_FUNC);
}
else {
audio_pt_unlock(&pa->pt, __func__);
audio_pt_unlock (&pa->pt, AUDIO_FUNC);
}
return decr;
}
@@ -298,7 +297,7 @@ static void *qpa_thread_in (void *arg)
PAVoiceIn *pa = arg;
HWVoiceIn *hw = &pa->hw;
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -314,15 +313,15 @@ static void *qpa_thread_in (void *arg)
break;
}
if (audio_pt_wait(&pa->pt, __func__)) {
if (audio_pt_wait (&pa->pt, AUDIO_FUNC)) {
goto exit;
}
}
incr = to_grab = audio_MIN(pa->dead, pa->g->conf.samples >> 5);
incr = to_grab = audio_MIN (pa->dead, pa->g->conf.samples >> 2);
wpos = pa->wpos;
if (audio_pt_unlock(&pa->pt, __func__)) {
if (audio_pt_unlock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -342,7 +341,7 @@ static void *qpa_thread_in (void *arg)
to_grab -= chunk;
}
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return NULL;
}
@@ -352,7 +351,7 @@ static void *qpa_thread_in (void *arg)
}
exit:
audio_pt_unlock(&pa->pt, __func__);
audio_pt_unlock (&pa->pt, AUDIO_FUNC);
return NULL;
}
@@ -361,7 +360,7 @@ static int qpa_run_in (HWVoiceIn *hw)
int live, incr, dead;
PAVoiceIn *pa = (PAVoiceIn *) hw;
if (audio_pt_lock(&pa->pt, __func__)) {
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return 0;
}
@@ -372,10 +371,10 @@ static int qpa_run_in (HWVoiceIn *hw)
pa->dead = dead - incr;
hw->wpos = pa->wpos;
if (pa->dead > 0) {
audio_pt_unlock_and_signal(&pa->pt, __func__);
audio_pt_unlock_and_signal (&pa->pt, AUDIO_FUNC);
}
else {
audio_pt_unlock(&pa->pt, __func__);
audio_pt_unlock (&pa->pt, AUDIO_FUNC);
}
return incr;
}
@@ -579,7 +578,7 @@ static int qpa_init_out(HWVoiceOut *hw, struct audsettings *as,
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = g->conf.samples;
pa->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
pa->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
pa->rpos = hw->rpos;
if (!pa->pcm_buf) {
dolog ("Could not allocate buffer (%d bytes)\n",
@@ -587,7 +586,7 @@ static int qpa_init_out(HWVoiceOut *hw, struct audsettings *as,
goto fail2;
}
if (audio_pt_init(&pa->pt, qpa_thread_out, hw, AUDIO_CAP, __func__)) {
if (audio_pt_init (&pa->pt, qpa_thread_out, hw, AUDIO_CAP, AUDIO_FUNC)) {
goto fail3;
}
@@ -636,7 +635,7 @@ static int qpa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = g->conf.samples;
pa->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
pa->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
pa->wpos = hw->wpos;
if (!pa->pcm_buf) {
dolog ("Could not allocate buffer (%d bytes)\n",
@@ -644,7 +643,7 @@ static int qpa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
goto fail2;
}
if (audio_pt_init(&pa->pt, qpa_thread_in, hw, AUDIO_CAP, __func__)) {
if (audio_pt_init (&pa->pt, qpa_thread_in, hw, AUDIO_CAP, AUDIO_FUNC)) {
goto fail3;
}
@@ -667,17 +666,17 @@ static void qpa_fini_out (HWVoiceOut *hw)
void *ret;
PAVoiceOut *pa = (PAVoiceOut *) hw;
audio_pt_lock(&pa->pt, __func__);
audio_pt_lock (&pa->pt, AUDIO_FUNC);
pa->done = 1;
audio_pt_unlock_and_signal(&pa->pt, __func__);
audio_pt_join(&pa->pt, &ret, __func__);
audio_pt_unlock_and_signal (&pa->pt, AUDIO_FUNC);
audio_pt_join (&pa->pt, &ret, AUDIO_FUNC);
if (pa->stream) {
pa_stream_unref (pa->stream);
pa->stream = NULL;
}
audio_pt_fini(&pa->pt, __func__);
audio_pt_fini (&pa->pt, AUDIO_FUNC);
g_free (pa->pcm_buf);
pa->pcm_buf = NULL;
}
@@ -687,17 +686,17 @@ static void qpa_fini_in (HWVoiceIn *hw)
void *ret;
PAVoiceIn *pa = (PAVoiceIn *) hw;
audio_pt_lock(&pa->pt, __func__);
audio_pt_lock (&pa->pt, AUDIO_FUNC);
pa->done = 1;
audio_pt_unlock_and_signal(&pa->pt, __func__);
audio_pt_join(&pa->pt, &ret, __func__);
audio_pt_unlock_and_signal (&pa->pt, AUDIO_FUNC);
audio_pt_join (&pa->pt, &ret, AUDIO_FUNC);
if (pa->stream) {
pa_stream_unref (pa->stream);
pa->stream = NULL;
}
audio_pt_fini(&pa->pt, __func__);
audio_pt_fini (&pa->pt, AUDIO_FUNC);
g_free (pa->pcm_buf);
pa->pcm_buf = NULL;
}
@@ -781,22 +780,23 @@ static int qpa_ctl_in (HWVoiceIn *hw, int cmd, ...)
pa_threaded_mainloop_lock (g->mainloop);
op = pa_context_set_source_output_volume (g->context,
pa_stream_get_index (pa->stream),
/* FIXME: use the upcoming "set_source_output_{volume,mute}" */
op = pa_context_set_source_volume_by_index (g->context,
pa_stream_get_device_index (pa->stream),
&v, NULL, NULL);
if (!op) {
qpa_logerr (pa_context_errno (g->context),
"set_source_output_volume() failed\n");
"set_source_volume() failed\n");
} else {
pa_operation_unref(op);
}
op = pa_context_set_source_output_mute (g->context,
op = pa_context_set_source_mute_by_index (g->context,
pa_stream_get_index (pa->stream),
sw->vol.mute, NULL, NULL);
if (!op) {
qpa_logerr (pa_context_errno (g->context),
"set_source_output_mute() failed\n");
"set_source_mute() failed\n");
} else {
pa_operation_unref (op);
}
@@ -814,21 +814,6 @@ static PAConf glob_conf = {
static void *qpa_audio_init (void)
{
if (glob_conf.server == NULL) {
char pidfile[64];
char *runtime;
struct stat st;
runtime = getenv("XDG_RUNTIME_DIR");
if (!runtime) {
return NULL;
}
snprintf(pidfile, sizeof(pidfile), "%s/pulse/pid", runtime);
if (stat(pidfile, &st) != 0) {
return NULL;
}
}
paaudio *g = g_malloc(sizeof(paaudio));
g->conf = glob_conf;
g->mainloop = NULL;
@@ -952,7 +937,7 @@ static struct audio_pcm_ops qpa_pcm_ops = {
.ctl_in = qpa_ctl_in
};
static struct audio_driver pa_audio_driver = {
struct audio_driver pa_audio_driver = {
.name = "pa",
.descr = "http://www.pulseaudio.org/",
.options = qpa_options,
@@ -966,9 +951,3 @@ static struct audio_driver pa_audio_driver = {
.voice_size_in = sizeof (PAVoiceIn),
.ctl_caps = VOICE_VOLUME_CAP
};
static void register_audio_pa(void)
{
audio_driver_register(&pa_audio_driver);
}
type_init(register_audio_pa);

View File

@@ -71,12 +71,6 @@ void NAME (void *opaque, struct st_sample *ibuf, struct st_sample *obuf,
while (rate->ipos <= (rate->opos >> 32)) {
ilast = *ibuf++;
rate->ipos++;
/* if ipos overflow, there is a infinite loop */
if (rate->ipos == 0xffffffff) {
rate->ipos = 1;
rate->opos = rate->opos & 0xffffffff;
}
/* See if we finished the input buffer yet */
if (ibuf >= iend) {
goto the_end;

View File

@@ -21,7 +21,6 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <SDL.h>
#include <SDL_thread.h>
#include "qemu-common.h"
@@ -38,14 +37,10 @@
#define AUDIO_CAP "sdl"
#include "audio_int.h"
#define USE_SEMAPHORE (SDL_MAJOR_VERSION < 2)
typedef struct SDLVoiceOut {
HWVoiceOut hw;
int live;
#if USE_SEMAPHORE
int rpos;
#endif
int decr;
} SDLVoiceOut;
@@ -57,10 +52,8 @@ static struct {
static struct SDLAudioState {
int exit;
#if USE_SEMAPHORE
SDL_mutex *mutex;
SDL_sem *sem;
#endif
int initialized;
bool driver_created;
} glob_sdl;
@@ -79,45 +72,31 @@ static void GCC_FMT_ATTR (1, 2) sdl_logerr (const char *fmt, ...)
static int sdl_lock (SDLAudioState *s, const char *forfn)
{
#if USE_SEMAPHORE
if (SDL_LockMutex (s->mutex)) {
sdl_logerr ("SDL_LockMutex for %s failed\n", forfn);
return -1;
}
#else
SDL_LockAudio();
#endif
return 0;
}
static int sdl_unlock (SDLAudioState *s, const char *forfn)
{
#if USE_SEMAPHORE
if (SDL_UnlockMutex (s->mutex)) {
sdl_logerr ("SDL_UnlockMutex for %s failed\n", forfn);
return -1;
}
#else
SDL_UnlockAudio();
#endif
return 0;
}
static int sdl_post (SDLAudioState *s, const char *forfn)
{
#if USE_SEMAPHORE
if (SDL_SemPost (s->sem)) {
sdl_logerr ("SDL_SemPost for %s failed\n", forfn);
return -1;
}
#endif
return 0;
}
#if USE_SEMAPHORE
static int sdl_wait (SDLAudioState *s, const char *forfn)
{
if (SDL_SemWait (s->sem)) {
@@ -126,7 +105,6 @@ static int sdl_wait (SDLAudioState *s, const char *forfn)
}
return 0;
}
#endif
static int sdl_unlock_and_post (SDLAudioState *s, const char *forfn)
{
@@ -267,7 +245,6 @@ static void sdl_callback (void *opaque, Uint8 *buf, int len)
int to_mix, decr;
/* dolog ("in callback samples=%d\n", samples); */
#if USE_SEMAPHORE
sdl_wait (s, "sdl_callback");
if (s->exit) {
return;
@@ -277,7 +254,7 @@ static void sdl_callback (void *opaque, Uint8 *buf, int len)
return;
}
if (audio_bug(__func__, sdl->live < 0 || sdl->live > hw->samples)) {
if (audio_bug (AUDIO_FUNC, sdl->live < 0 || sdl->live > hw->samples)) {
dolog ("sdl->live=%d hw->samples=%d\n",
sdl->live, hw->samples);
return;
@@ -286,11 +263,6 @@ static void sdl_callback (void *opaque, Uint8 *buf, int len)
if (!sdl->live) {
goto again;
}
#else
if (s->exit || !sdl->live) {
break;
}
#endif
/* dolog ("in callback live=%d\n", live); */
to_mix = audio_MIN (samples, sdl->live);
@@ -301,11 +273,7 @@ static void sdl_callback (void *opaque, Uint8 *buf, int len)
/* dolog ("in callback to_mix %d, chunk %d\n", to_mix, chunk); */
hw->clip (buf, src, chunk);
#if USE_SEMAPHORE
sdl->rpos = (sdl->rpos + chunk) % hw->samples;
#else
hw->rpos = (hw->rpos + chunk) % hw->samples;
#endif
to_mix -= chunk;
buf += chunk << hw->info.shift;
}
@@ -313,21 +281,12 @@ static void sdl_callback (void *opaque, Uint8 *buf, int len)
sdl->live -= decr;
sdl->decr += decr;
#if USE_SEMAPHORE
again:
if (sdl_unlock (s, "sdl_callback")) {
return;
}
#endif
}
/* dolog ("done len=%d\n", len); */
#if (SDL_MAJOR_VERSION >= 2)
/* SDL2 does not clear the remaining buffer for us, so do it on our own */
if (samples) {
memset(buf, 0, samples << hw->info.shift);
}
#endif
}
static int sdl_write_out (SWVoiceOut *sw, void *buf, int len)
@@ -355,12 +314,8 @@ static int sdl_run_out (HWVoiceOut *hw, int live)
decr = audio_MIN (sdl->decr, live);
sdl->decr -= decr;
#if USE_SEMAPHORE
sdl->live = live - decr;
hw->rpos = sdl->rpos;
#else
sdl->live = live;
#endif
if (sdl->live > 0) {
sdl_unlock_and_post (s, "sdl_run_out");
@@ -449,7 +404,6 @@ static void *sdl_audio_init (void)
return NULL;
}
#if USE_SEMAPHORE
s->mutex = SDL_CreateMutex ();
if (!s->mutex) {
sdl_logerr ("Failed to create SDL mutex\n");
@@ -464,7 +418,6 @@ static void *sdl_audio_init (void)
SDL_QuitSubSystem (SDL_INIT_AUDIO);
return NULL;
}
#endif
s->driver_created = true;
return s;
@@ -474,10 +427,8 @@ static void sdl_audio_fini (void *opaque)
{
SDLAudioState *s = opaque;
sdl_close (s);
#if USE_SEMAPHORE
SDL_DestroySemaphore (s->sem);
SDL_DestroyMutex (s->mutex);
#endif
SDL_QuitSubSystem (SDL_INIT_AUDIO);
s->driver_created = false;
}
@@ -500,7 +451,7 @@ static struct audio_pcm_ops sdl_pcm_ops = {
.ctl_out = sdl_ctl_out,
};
static struct audio_driver sdl_audio_driver = {
struct audio_driver sdl_audio_driver = {
.name = "sdl",
.descr = "SDL http://www.libsdl.org",
.options = sdl_options,
@@ -513,9 +464,3 @@ static struct audio_driver sdl_audio_driver = {
.voice_size_out = sizeof (SDLVoiceOut),
.voice_size_in = 0
};
static void register_audio_sdl(void)
{
audio_driver_register(&sdl_audio_driver);
}
type_init(register_audio_sdl);

View File

@@ -17,9 +17,7 @@
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "qemu/host-utils.h"
#include "qemu/error-report.h"
#include "qemu/timer.h"
#include "ui/qemu-spice.h"
@@ -105,11 +103,11 @@ static int rate_get_samples (struct audio_pcm_info *info, SpiceRateCtl *rate)
now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
ticks = now - rate->start_ticks;
bytes = muldiv64(ticks, info->bytes_per_second, NANOSECONDS_PER_SECOND);
bytes = muldiv64 (ticks, info->bytes_per_second, get_ticks_per_sec ());
samples = (bytes - rate->bytes_sent) >> info->shift;
if (samples < 0 || samples > 65536) {
error_report("Resetting rate control (%" PRId64 " samples)", samples);
rate_start(rate);
rate_start (rate);
samples = 0;
}
rate->bytes_sent += samples << info->shift;
@@ -391,7 +389,7 @@ static struct audio_pcm_ops audio_callbacks = {
.ctl_in = line_in_ctl,
};
static struct audio_driver spice_audio_driver = {
struct audio_driver spice_audio_driver = {
.name = "spice",
.descr = "spice audio driver",
.options = audio_options,
@@ -411,9 +409,3 @@ void qemu_spice_audio_init (void)
{
spice_audio_driver.can_be_default = 1;
}
static void register_audio_spice(void)
{
audio_driver_register(&spice_audio_driver);
}
type_init(register_audio_spice);

View File

@@ -1,22 +0,0 @@
# See docs/devel/tracing.txt for syntax documentation.
# audio/alsaaudio.c
alsa_revents(int revents) "revents = %d"
alsa_pollout(int i, int fd) "i = %d fd = %d"
alsa_set_handler(int events, int index, int fd, int err) "events=0x%x index=%d fd=%d err=%d"
alsa_wrote_zero(int len) "Failed to write %d frames (wrote zero)"
alsa_read_zero(long len) "Failed to read %ld frames (read zero)"
alsa_xrun_out(void) "Recovering from playback xrun"
alsa_xrun_in(void) "Recovering from capture xrun"
alsa_resume_out(void) "Resuming suspended output stream"
alsa_resume_in(void) "Resuming suspended input stream"
alsa_no_frames(int state) "No frames available and ALSA state is %d"
# audio/ossaudio.c
oss_version(int version) "OSS version = 0x%x"
oss_invalid_available_size(int size, int bufsize) "Invalid available size, size=%d bufsize=%d"
# audio/audio.c
audio_timer_start(int interval) "interval %d ms"
audio_timer_stop(void) ""
audio_timer_delayed(int interval) "interval %d ms"

View File

@@ -21,8 +21,7 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/host-utils.h"
#include "hw/hw.h"
#include "qemu/timer.h"
#include "audio.h"
@@ -51,7 +50,7 @@ static int wav_run_out (HWVoiceOut *hw, int live)
int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
int64_t ticks = now - wav->old_ticks;
int64_t bytes =
muldiv64(ticks, hw->info.bytes_per_second, NANOSECONDS_PER_SECOND);
muldiv64 (ticks, hw->info.bytes_per_second, get_ticks_per_sec ());
if (bytes > INT_MAX) {
samples = INT_MAX >> hw->info.shift;
@@ -139,7 +138,7 @@ static int wav_init_out(HWVoiceOut *hw, struct audsettings *as,
audio_pcm_init_info (&hw->info, &wav_as);
hw->samples = 1024;
wav->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
wav->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
if (!wav->pcm_buf) {
dolog ("Could not allocate buffer (%d bytes)\n",
hw->samples << hw->info.shift);
@@ -278,7 +277,7 @@ static struct audio_pcm_ops wav_pcm_ops = {
.ctl_out = wav_ctl_out,
};
static struct audio_driver wav_audio_driver = {
struct audio_driver wav_audio_driver = {
.name = "wav",
.descr = "WAV renderer http://wikipedia.org/wiki/WAV",
.options = wav_options,
@@ -291,9 +290,3 @@ static struct audio_driver wav_audio_driver = {
.voice_size_out = sizeof (WAVVoiceOut),
.voice_size_in = 0
};
static void register_audio_wav(void)
{
audio_driver_register(&wav_audio_driver);
}
type_init(register_audio_wav);

View File

@@ -1,7 +1,5 @@
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "monitor/monitor.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "audio.h"
@@ -38,29 +36,30 @@ static void wav_destroy (void *opaque)
uint8_t dlen[4];
uint32_t datalen = wav->bytes;
uint32_t rifflen = datalen + 36;
Monitor *mon = cur_mon;
if (wav->f) {
le_store (rlen, rifflen, 4);
le_store (dlen, datalen, 4);
if (fseek (wav->f, 4, SEEK_SET)) {
error_report("wav_destroy: rlen fseek failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: rlen fseek failed\nReason: %s\n",
strerror (errno));
goto doclose;
}
if (fwrite (rlen, 4, 1, wav->f) != 1) {
error_report("wav_destroy: rlen fwrite failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: rlen fwrite failed\nReason %s\n",
strerror (errno));
goto doclose;
}
if (fseek (wav->f, 32, SEEK_CUR)) {
error_report("wav_destroy: dlen fseek failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: dlen fseek failed\nReason %s\n",
strerror (errno));
goto doclose;
}
if (fwrite (dlen, 1, 4, wav->f) != 4) {
error_report("wav_destroy: dlen fwrite failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: dlen fwrite failed\nReason %s\n",
strerror (errno));
goto doclose;
}
doclose:
@@ -77,7 +76,8 @@ static void wav_capture (void *opaque, void *buf, int size)
WAVState *wav = opaque;
if (fwrite (buf, size, 1, wav->f) != 1) {
error_report("wav_capture: fwrite error: %s", strerror(errno));
monitor_printf (cur_mon, "wav_capture: fwrite error\nReason: %s",
strerror (errno));
}
wav->bytes += size;
}
@@ -87,7 +87,6 @@ static void wav_capture_destroy (void *opaque)
WAVState *wav = opaque;
AUD_del_capture (wav->cap, wav);
g_free (wav);
}
static void wav_capture_info (void *opaque)
@@ -108,6 +107,7 @@ static struct capture_ops wav_capture_ops = {
int wav_start_capture (CaptureState *s, const char *path, int freq,
int bits, int nchannels)
{
Monitor *mon = cur_mon;
WAVState *wav;
uint8_t hdr[] = {
0x52, 0x49, 0x46, 0x46, 0x00, 0x00, 0x00, 0x00, 0x57, 0x41, 0x56,
@@ -121,13 +121,13 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
CaptureVoiceOut *cap;
if (bits != 8 && bits != 16) {
error_report("incorrect bit count %d, must be 8 or 16", bits);
monitor_printf (mon, "incorrect bit count %d, must be 8 or 16\n", bits);
return -1;
}
if (nchannels != 1 && nchannels != 2) {
error_report("incorrect channel count %d, must be 1 or 2",
nchannels);
monitor_printf (mon, "incorrect channel count %d, must be 1 or 2\n",
nchannels);
return -1;
}
@@ -155,8 +155,8 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
wav->f = fopen (path, "wb");
if (!wav->f) {
error_report("Failed to open wave file `%s': %s",
path, strerror(errno));
monitor_printf (mon, "Failed to open wave file `%s'\nReason: %s\n",
path, strerror (errno));
g_free (wav);
return -1;
}
@@ -167,13 +167,14 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
wav->freq = freq;
if (fwrite (hdr, sizeof (hdr), 1, wav->f) != 1) {
error_report("Failed to write header: %s", strerror(errno));
monitor_printf (mon, "Failed to write header\nReason: %s\n",
strerror (errno));
goto error_free;
}
cap = AUD_add_capture (&as, &ops, wav);
if (!cap) {
error_report("Failed to add audio capture");
monitor_printf (mon, "Failed to add audio capture\n");
goto error_free;
}
@@ -185,7 +186,8 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
error_free:
g_free (wav->path);
if (fclose (wav->f)) {
error_report("Failed to close wave file: %s", strerror(errno));
monitor_printf (mon, "Failed to close wave file\nReason: %s\n",
strerror (errno));
}
g_free (wav);
return -1;

View File

@@ -1,7 +0,0 @@
authz-obj-y += base.o
authz-obj-y += simple.o
authz-obj-y += list.o
authz-obj-y += listfile.o
authz-obj-$(CONFIG_AUTH_PAM) += pamacct.o
pamacct.o-libs = -lpam

View File

@@ -1,82 +0,0 @@
/*
* QEMU authorization framework base class
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/base.h"
#include "authz/trace.h"
bool qauthz_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZClass *cls = QAUTHZ_GET_CLASS(authz);
bool allowed;
allowed = cls->is_allowed(authz, identity, errp);
trace_qauthz_is_allowed(authz, identity, allowed);
return allowed;
}
bool qauthz_is_allowed_by_id(const char *authzid,
const char *identity,
Error **errp)
{
QAuthZ *authz;
Object *obj;
Object *container;
container = object_get_objects_root();
obj = object_resolve_path_component(container,
authzid);
if (!obj) {
error_setg(errp, "Cannot find QAuthZ object ID %s",
authzid);
return false;
}
if (!object_dynamic_cast(obj, TYPE_QAUTHZ)) {
error_setg(errp, "Object '%s' is not a QAuthZ subclass",
authzid);
return false;
}
authz = QAUTHZ(obj);
return qauthz_is_allowed(authz, identity, errp);
}
static const TypeInfo authz_info = {
.parent = TYPE_OBJECT,
.name = TYPE_QAUTHZ,
.instance_size = sizeof(QAuthZ),
.class_size = sizeof(QAuthZClass),
.abstract = true,
};
static void qauthz_register_types(void)
{
type_register_static(&authz_info);
}
type_init(qauthz_register_types)

View File

@@ -1,271 +0,0 @@
/*
* QEMU access control list authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/list.h"
#include "authz/trace.h"
#include "qom/object_interfaces.h"
#include "qapi/qapi-visit-authz.h"
static bool qauthz_list_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(authz);
QAuthZListRuleList *rules = lauthz->rules;
while (rules) {
QAuthZListRule *rule = rules->value;
QAuthZListFormat format = rule->has_format ? rule->format :
QAUTHZ_LIST_FORMAT_EXACT;
trace_qauthz_list_check_rule(authz, rule->match, identity,
format, rule->policy);
switch (format) {
case QAUTHZ_LIST_FORMAT_EXACT:
if (g_str_equal(rule->match, identity)) {
return rule->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
break;
case QAUTHZ_LIST_FORMAT_GLOB:
if (g_pattern_match_simple(rule->match, identity)) {
return rule->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
break;
default:
g_warn_if_reached();
return false;
}
rules = rules->next;
}
trace_qauthz_list_default_policy(authz, identity, lauthz->policy);
return lauthz->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
static void
qauthz_list_prop_set_policy(Object *obj,
int value,
Error **errp G_GNUC_UNUSED)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
lauthz->policy = value;
}
static int
qauthz_list_prop_get_policy(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
return lauthz->policy;
}
static void
qauthz_list_prop_get_rules(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
visit_type_QAuthZListRuleList(v, name, &lauthz->rules, errp);
}
static void
qauthz_list_prop_set_rules(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
QAuthZListRuleList *oldrules;
oldrules = lauthz->rules;
visit_type_QAuthZListRuleList(v, name, &lauthz->rules, errp);
qapi_free_QAuthZListRuleList(oldrules);
}
static void
qauthz_list_finalize(Object *obj)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
qapi_free_QAuthZListRuleList(lauthz->rules);
}
static void
qauthz_list_class_init(ObjectClass *oc, void *data)
{
QAuthZClass *authz = QAUTHZ_CLASS(oc);
object_class_property_add_enum(oc, "policy",
"QAuthZListPolicy",
&QAuthZListPolicy_lookup,
qauthz_list_prop_get_policy,
qauthz_list_prop_set_policy,
NULL);
object_class_property_add(oc, "rules", "QAuthZListRule",
qauthz_list_prop_get_rules,
qauthz_list_prop_set_rules,
NULL, NULL, NULL);
authz->is_allowed = qauthz_list_is_allowed;
}
QAuthZList *qauthz_list_new(const char *id,
QAuthZListPolicy policy,
Error **errp)
{
return QAUTHZ_LIST(
object_new_with_props(TYPE_QAUTHZ_LIST,
object_get_objects_root(),
id, errp,
"policy", QAuthZListPolicy_str(policy),
NULL));
}
ssize_t qauthz_list_append_rule(QAuthZList *auth,
const char *match,
QAuthZListPolicy policy,
QAuthZListFormat format,
Error **errp)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *tmp;
size_t i = 0;
rule = g_new0(QAuthZListRule, 1);
rule->policy = policy;
rule->match = g_strdup(match);
rule->format = format;
rule->has_format = true;
tmp = g_new0(QAuthZListRuleList, 1);
tmp->value = rule;
rules = auth->rules;
if (rules) {
while (rules->next) {
i++;
rules = rules->next;
}
rules->next = tmp;
return i + 1;
} else {
auth->rules = tmp;
return 0;
}
}
ssize_t qauthz_list_insert_rule(QAuthZList *auth,
const char *match,
QAuthZListPolicy policy,
QAuthZListFormat format,
size_t index,
Error **errp)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *tmp;
size_t i = 0;
rule = g_new0(QAuthZListRule, 1);
rule->policy = policy;
rule->match = g_strdup(match);
rule->format = format;
rule->has_format = true;
tmp = g_new0(QAuthZListRuleList, 1);
tmp->value = rule;
rules = auth->rules;
if (rules && index > 0) {
while (rules->next && i < (index - 1)) {
i++;
rules = rules->next;
}
tmp->next = rules->next;
rules->next = tmp;
return i + 1;
} else {
tmp->next = auth->rules;
auth->rules = tmp;
return 0;
}
}
ssize_t qauthz_list_delete_rule(QAuthZList *auth, const char *match)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *prev;
size_t i = 0;
prev = NULL;
rules = auth->rules;
while (rules) {
rule = rules->value;
if (g_str_equal(rule->match, match)) {
if (prev) {
prev->next = rules->next;
} else {
auth->rules = rules->next;
}
rules->next = NULL;
qapi_free_QAuthZListRuleList(rules);
return i;
}
prev = rules;
rules = rules->next;
i++;
}
return -1;
}
static const TypeInfo qauthz_list_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_LIST,
.instance_size = sizeof(QAuthZList),
.instance_finalize = qauthz_list_finalize,
.class_size = sizeof(QAuthZListClass),
.class_init = qauthz_list_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_list_register_types(void)
{
type_register_static(&qauthz_list_info);
}
type_init(qauthz_list_register_types);

View File

@@ -1,283 +0,0 @@
/*
* QEMU access control list file authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/listfile.h"
#include "authz/trace.h"
#include "qemu/error-report.h"
#include "qemu/main-loop.h"
#include "qemu/sockets.h"
#include "qemu/filemonitor.h"
#include "qom/object_interfaces.h"
#include "qapi/qapi-visit-authz.h"
#include "qapi/qmp/qjson.h"
#include "qapi/qmp/qobject.h"
#include "qapi/qmp/qerror.h"
#include "qapi/qobject-input-visitor.h"
static bool
qauthz_list_file_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(authz);
if (fauthz->list) {
return qauthz_is_allowed(fauthz->list, identity, errp);
}
return false;
}
static QAuthZ *
qauthz_list_file_load(QAuthZListFile *fauthz, Error **errp)
{
GError *err = NULL;
gchar *content = NULL;
gsize len;
QObject *obj = NULL;
QDict *pdict;
Visitor *v = NULL;
QAuthZ *ret = NULL;
trace_qauthz_list_file_load(fauthz, fauthz->filename);
if (!g_file_get_contents(fauthz->filename, &content, &len, &err)) {
error_setg(errp, "Unable to read '%s': %s",
fauthz->filename, err->message);
goto cleanup;
}
obj = qobject_from_json(content, errp);
if (!obj) {
goto cleanup;
}
pdict = qobject_to(QDict, obj);
if (!pdict) {
error_setg(errp, QERR_INVALID_PARAMETER_TYPE, "obj", "dict");
goto cleanup;
}
v = qobject_input_visitor_new(obj);
ret = (QAuthZ *)user_creatable_add_type(TYPE_QAUTHZ_LIST,
NULL, pdict, v, errp);
cleanup:
visit_free(v);
qobject_unref(obj);
if (err) {
g_error_free(err);
}
g_free(content);
return ret;
}
static void
qauthz_list_file_event(int wd G_GNUC_UNUSED,
QFileMonitorEvent ev G_GNUC_UNUSED,
const char *name G_GNUC_UNUSED,
void *opaque)
{
QAuthZListFile *fauthz = opaque;
Error *err = NULL;
if (ev != QFILE_MONITOR_EVENT_MODIFIED &&
ev != QFILE_MONITOR_EVENT_CREATED) {
return;
}
object_unref(OBJECT(fauthz->list));
fauthz->list = qauthz_list_file_load(fauthz, &err);
trace_qauthz_list_file_refresh(fauthz,
fauthz->filename, fauthz->list ? 1 : 0);
if (!fauthz->list) {
error_report_err(err);
}
}
static void
qauthz_list_file_complete(UserCreatable *uc, Error **errp)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(uc);
gchar *dir = NULL, *file = NULL;
fauthz->list = qauthz_list_file_load(fauthz, errp);
if (!fauthz->refresh) {
return;
}
fauthz->file_monitor = qemu_file_monitor_new(errp);
if (!fauthz->file_monitor) {
return;
}
dir = g_path_get_dirname(fauthz->filename);
if (g_str_equal(dir, ".")) {
error_setg(errp, "Filename must be an absolute path");
goto cleanup;
}
file = g_path_get_basename(fauthz->filename);
if (g_str_equal(file, ".")) {
error_setg(errp, "Path has no trailing filename component");
goto cleanup;
}
fauthz->file_watch = qemu_file_monitor_add_watch(
fauthz->file_monitor, dir, file,
qauthz_list_file_event, fauthz, errp);
if (fauthz->file_watch < 0) {
goto cleanup;
}
cleanup:
g_free(file);
g_free(dir);
}
static void
qauthz_list_file_prop_set_filename(Object *obj,
const char *value,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
g_free(fauthz->filename);
fauthz->filename = g_strdup(value);
}
static char *
qauthz_list_file_prop_get_filename(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
return g_strdup(fauthz->filename);
}
static void
qauthz_list_file_prop_set_refresh(Object *obj,
bool value,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
fauthz->refresh = value;
}
static bool
qauthz_list_file_prop_get_refresh(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
return fauthz->refresh;
}
static void
qauthz_list_file_finalize(Object *obj)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
object_unref(OBJECT(fauthz->list));
g_free(fauthz->filename);
qemu_file_monitor_free(fauthz->file_monitor);
}
static void
qauthz_list_file_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
QAuthZClass *authz = QAUTHZ_CLASS(oc);
ucc->complete = qauthz_list_file_complete;
object_class_property_add_str(oc, "filename",
qauthz_list_file_prop_get_filename,
qauthz_list_file_prop_set_filename,
NULL);
object_class_property_add_bool(oc, "refresh",
qauthz_list_file_prop_get_refresh,
qauthz_list_file_prop_set_refresh,
NULL);
authz->is_allowed = qauthz_list_file_is_allowed;
}
static void
qauthz_list_file_init(Object *obj)
{
QAuthZListFile *authz = QAUTHZ_LIST_FILE(obj);
authz->file_watch = -1;
#ifdef CONFIG_INOTIFY1
authz->refresh = TRUE;
#endif
}
QAuthZListFile *qauthz_list_file_new(const char *id,
const char *filename,
bool refresh,
Error **errp)
{
return QAUTHZ_LIST_FILE(
object_new_with_props(TYPE_QAUTHZ_LIST_FILE,
object_get_objects_root(),
id, errp,
"filename", filename,
"refresh", refresh ? "yes" : "no",
NULL));
}
static const TypeInfo qauthz_list_file_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_LIST_FILE,
.instance_init = qauthz_list_file_init,
.instance_size = sizeof(QAuthZListFile),
.instance_finalize = qauthz_list_file_finalize,
.class_size = sizeof(QAuthZListFileClass),
.class_init = qauthz_list_file_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_list_file_register_types(void)
{
type_register_static(&qauthz_list_file_info);
}
type_init(qauthz_list_file_register_types);

View File

@@ -1,148 +0,0 @@
/*
* QEMU PAM authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/pamacct.h"
#include "authz/trace.h"
#include "qom/object_interfaces.h"
#include <security/pam_appl.h>
static bool qauthz_pam_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(authz);
const struct pam_conv pam_conversation = { 0 };
pam_handle_t *pamh = NULL;
int ret;
trace_qauthz_pam_check(authz, identity, pauthz->service);
ret = pam_start(pauthz->service,
identity,
&pam_conversation,
&pamh);
if (ret != PAM_SUCCESS) {
error_setg(errp, "Unable to start PAM transaction: %s",
pam_strerror(NULL, ret));
return false;
}
ret = pam_acct_mgmt(pamh, PAM_SILENT);
pam_end(pamh, ret);
if (ret != PAM_SUCCESS) {
error_setg(errp, "Unable to authorize user '%s': %s",
identity, pam_strerror(pamh, ret));
return false;
}
return true;
}
static void
qauthz_pam_prop_set_service(Object *obj,
const char *service,
Error **errp G_GNUC_UNUSED)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
g_free(pauthz->service);
pauthz->service = g_strdup(service);
}
static char *
qauthz_pam_prop_get_service(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
return g_strdup(pauthz->service);
}
static void
qauthz_pam_complete(UserCreatable *uc, Error **errp)
{
}
static void
qauthz_pam_finalize(Object *obj)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
g_free(pauthz->service);
}
static void
qauthz_pam_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
QAuthZClass *authz = QAUTHZ_CLASS(oc);
ucc->complete = qauthz_pam_complete;
authz->is_allowed = qauthz_pam_is_allowed;
object_class_property_add_str(oc, "service",
qauthz_pam_prop_get_service,
qauthz_pam_prop_set_service,
NULL);
}
QAuthZPAM *qauthz_pam_new(const char *id,
const char *service,
Error **errp)
{
return QAUTHZ_PAM(
object_new_with_props(TYPE_QAUTHZ_PAM,
object_get_objects_root(),
id, errp,
"service", service,
NULL));
}
static const TypeInfo qauthz_pam_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_PAM,
.instance_size = sizeof(QAuthZPAM),
.instance_finalize = qauthz_pam_finalize,
.class_size = sizeof(QAuthZPAMClass),
.class_init = qauthz_pam_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_pam_register_types(void)
{
type_register_static(&qauthz_pam_info);
}
type_init(qauthz_pam_register_types);

View File

@@ -1,115 +0,0 @@
/*
* QEMU simple authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/simple.h"
#include "authz/trace.h"
#include "qom/object_interfaces.h"
static bool qauthz_simple_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(authz);
trace_qauthz_simple_is_allowed(authz, sauthz->identity, identity);
return g_str_equal(identity, sauthz->identity);
}
static void
qauthz_simple_prop_set_identity(Object *obj,
const char *value,
Error **errp G_GNUC_UNUSED)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
g_free(sauthz->identity);
sauthz->identity = g_strdup(value);
}
static char *
qauthz_simple_prop_get_identity(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
return g_strdup(sauthz->identity);
}
static void
qauthz_simple_finalize(Object *obj)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
g_free(sauthz->identity);
}
static void
qauthz_simple_class_init(ObjectClass *oc, void *data)
{
QAuthZClass *authz = QAUTHZ_CLASS(oc);
authz->is_allowed = qauthz_simple_is_allowed;
object_class_property_add_str(oc, "identity",
qauthz_simple_prop_get_identity,
qauthz_simple_prop_set_identity,
NULL);
}
QAuthZSimple *qauthz_simple_new(const char *id,
const char *identity,
Error **errp)
{
return QAUTHZ_SIMPLE(
object_new_with_props(TYPE_QAUTHZ_SIMPLE,
object_get_objects_root(),
id, errp,
"identity", identity,
NULL));
}
static const TypeInfo qauthz_simple_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_SIMPLE,
.instance_size = sizeof(QAuthZSimple),
.instance_finalize = qauthz_simple_finalize,
.class_size = sizeof(QAuthZSimpleClass),
.class_init = qauthz_simple_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_simple_register_types(void)
{
type_register_static(&qauthz_simple_info);
}
type_init(qauthz_simple_register_types);

View File

@@ -1,18 +0,0 @@
# See docs/devel/tracing.txt for syntax documentation.
# authz/base.c
qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d"
# auth/simple.c
qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s"
# auth/list.c
qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d"
qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d"
# auth/listfile.c
qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s"
qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"
# auth/pam.c
qauthz_pam_check(void *authz, const char *identity, const char *service) "AuthZ PAM %p identity=%s service=%s"

View File

@@ -1,18 +1,11 @@
common-obj-y += rng.o rng-egd.o
common-obj-$(CONFIG_POSIX) += rng-random.o
common-obj-y += msmouse.o testdev.o
common-obj-$(CONFIG_BRLAPI) += baum.o
baum.o-cflags := $(SDL_CFLAGS)
common-obj-$(CONFIG_TPM) += tpm.o
common-obj-y += hostmem.o hostmem-ram.o
common-obj-$(CONFIG_POSIX) += hostmem-file.o
common-obj-y += cryptodev.o
common-obj-y += cryptodev-builtin.o
ifeq ($(CONFIG_VIRTIO),y)
common-obj-y += cryptodev-vhost.o
common-obj-$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX)) += \
cryptodev-vhost-user.o
endif
common-obj-$(CONFIG_LINUX) += hostmem-memfd.o
common-obj-$(CONFIG_LINUX) += hostmem-file.o

635
backends/baum.c Normal file
View File

@@ -0,0 +1,635 @@
/*
* QEMU Baum Braille Device
*
* Copyright (c) 2008 Samuel Thibault
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu-common.h"
#include "sysemu/char.h"
#include "qemu/timer.h"
#include "hw/usb.h"
#include <brlapi.h>
#include <brlapi_constants.h>
#include <brlapi_keycodes.h>
#ifdef CONFIG_SDL
#include <SDL_syswm.h>
#endif
#if 0
#define DPRINTF(fmt, ...) \
printf(fmt, ## __VA_ARGS__)
#else
#define DPRINTF(fmt, ...)
#endif
#define ESC 0x1B
#define BAUM_REQ_DisplayData 0x01
#define BAUM_REQ_GetVersionNumber 0x05
#define BAUM_REQ_GetKeys 0x08
#define BAUM_REQ_SetMode 0x12
#define BAUM_REQ_SetProtocol 0x15
#define BAUM_REQ_GetDeviceIdentity 0x84
#define BAUM_REQ_GetSerialNumber 0x8A
#define BAUM_RSP_CellCount 0x01
#define BAUM_RSP_VersionNumber 0x05
#define BAUM_RSP_ModeSetting 0x11
#define BAUM_RSP_CommunicationChannel 0x16
#define BAUM_RSP_PowerdownSignal 0x17
#define BAUM_RSP_HorizontalSensors 0x20
#define BAUM_RSP_VerticalSensors 0x21
#define BAUM_RSP_RoutingKeys 0x22
#define BAUM_RSP_Switches 0x23
#define BAUM_RSP_TopKeys 0x24
#define BAUM_RSP_HorizontalSensor 0x25
#define BAUM_RSP_VerticalSensor 0x26
#define BAUM_RSP_RoutingKey 0x27
#define BAUM_RSP_FrontKeys6 0x28
#define BAUM_RSP_BackKeys6 0x29
#define BAUM_RSP_CommandKeys 0x2B
#define BAUM_RSP_FrontKeys10 0x2C
#define BAUM_RSP_BackKeys10 0x2D
#define BAUM_RSP_EntryKeys 0x33
#define BAUM_RSP_JoyStick 0x34
#define BAUM_RSP_ErrorCode 0x40
#define BAUM_RSP_InfoBlock 0x42
#define BAUM_RSP_DeviceIdentity 0x84
#define BAUM_RSP_SerialNumber 0x8A
#define BAUM_RSP_BluetoothName 0x8C
#define BAUM_TL1 0x01
#define BAUM_TL2 0x02
#define BAUM_TL3 0x04
#define BAUM_TR1 0x08
#define BAUM_TR2 0x10
#define BAUM_TR3 0x20
#define BUF_SIZE 256
typedef struct {
CharDriverState *chr;
brlapi_handle_t *brlapi;
int brlapi_fd;
unsigned int x, y;
uint8_t in_buf[BUF_SIZE];
uint8_t in_buf_used;
uint8_t out_buf[BUF_SIZE];
uint8_t out_buf_used, out_buf_ptr;
QEMUTimer *cellCount_timer;
} BaumDriverState;
/* Let's assume NABCC by default */
static const uint8_t nabcc_translation[256] = {
[0] = ' ',
#ifndef BRLAPI_DOTS
#define BRLAPI_DOTS(d1,d2,d3,d4,d5,d6,d7,d8) \
((d1?BRLAPI_DOT1:0)|\
(d2?BRLAPI_DOT2:0)|\
(d3?BRLAPI_DOT3:0)|\
(d4?BRLAPI_DOT4:0)|\
(d5?BRLAPI_DOT5:0)|\
(d6?BRLAPI_DOT6:0)|\
(d7?BRLAPI_DOT7:0)|\
(d8?BRLAPI_DOT8:0))
#endif
[BRLAPI_DOTS(1,0,0,0,0,0,0,0)] = 'a',
[BRLAPI_DOTS(1,1,0,0,0,0,0,0)] = 'b',
[BRLAPI_DOTS(1,0,0,1,0,0,0,0)] = 'c',
[BRLAPI_DOTS(1,0,0,1,1,0,0,0)] = 'd',
[BRLAPI_DOTS(1,0,0,0,1,0,0,0)] = 'e',
[BRLAPI_DOTS(1,1,0,1,0,0,0,0)] = 'f',
[BRLAPI_DOTS(1,1,0,1,1,0,0,0)] = 'g',
[BRLAPI_DOTS(1,1,0,0,1,0,0,0)] = 'h',
[BRLAPI_DOTS(0,1,0,1,0,0,0,0)] = 'i',
[BRLAPI_DOTS(0,1,0,1,1,0,0,0)] = 'j',
[BRLAPI_DOTS(1,0,1,0,0,0,0,0)] = 'k',
[BRLAPI_DOTS(1,1,1,0,0,0,0,0)] = 'l',
[BRLAPI_DOTS(1,0,1,1,0,0,0,0)] = 'm',
[BRLAPI_DOTS(1,0,1,1,1,0,0,0)] = 'n',
[BRLAPI_DOTS(1,0,1,0,1,0,0,0)] = 'o',
[BRLAPI_DOTS(1,1,1,1,0,0,0,0)] = 'p',
[BRLAPI_DOTS(1,1,1,1,1,0,0,0)] = 'q',
[BRLAPI_DOTS(1,1,1,0,1,0,0,0)] = 'r',
[BRLAPI_DOTS(0,1,1,1,0,0,0,0)] = 's',
[BRLAPI_DOTS(0,1,1,1,1,0,0,0)] = 't',
[BRLAPI_DOTS(1,0,1,0,0,1,0,0)] = 'u',
[BRLAPI_DOTS(1,1,1,0,0,1,0,0)] = 'v',
[BRLAPI_DOTS(0,1,0,1,1,1,0,0)] = 'w',
[BRLAPI_DOTS(1,0,1,1,0,1,0,0)] = 'x',
[BRLAPI_DOTS(1,0,1,1,1,1,0,0)] = 'y',
[BRLAPI_DOTS(1,0,1,0,1,1,0,0)] = 'z',
[BRLAPI_DOTS(1,0,0,0,0,0,1,0)] = 'A',
[BRLAPI_DOTS(1,1,0,0,0,0,1,0)] = 'B',
[BRLAPI_DOTS(1,0,0,1,0,0,1,0)] = 'C',
[BRLAPI_DOTS(1,0,0,1,1,0,1,0)] = 'D',
[BRLAPI_DOTS(1,0,0,0,1,0,1,0)] = 'E',
[BRLAPI_DOTS(1,1,0,1,0,0,1,0)] = 'F',
[BRLAPI_DOTS(1,1,0,1,1,0,1,0)] = 'G',
[BRLAPI_DOTS(1,1,0,0,1,0,1,0)] = 'H',
[BRLAPI_DOTS(0,1,0,1,0,0,1,0)] = 'I',
[BRLAPI_DOTS(0,1,0,1,1,0,1,0)] = 'J',
[BRLAPI_DOTS(1,0,1,0,0,0,1,0)] = 'K',
[BRLAPI_DOTS(1,1,1,0,0,0,1,0)] = 'L',
[BRLAPI_DOTS(1,0,1,1,0,0,1,0)] = 'M',
[BRLAPI_DOTS(1,0,1,1,1,0,1,0)] = 'N',
[BRLAPI_DOTS(1,0,1,0,1,0,1,0)] = 'O',
[BRLAPI_DOTS(1,1,1,1,0,0,1,0)] = 'P',
[BRLAPI_DOTS(1,1,1,1,1,0,1,0)] = 'Q',
[BRLAPI_DOTS(1,1,1,0,1,0,1,0)] = 'R',
[BRLAPI_DOTS(0,1,1,1,0,0,1,0)] = 'S',
[BRLAPI_DOTS(0,1,1,1,1,0,1,0)] = 'T',
[BRLAPI_DOTS(1,0,1,0,0,1,1,0)] = 'U',
[BRLAPI_DOTS(1,1,1,0,0,1,1,0)] = 'V',
[BRLAPI_DOTS(0,1,0,1,1,1,1,0)] = 'W',
[BRLAPI_DOTS(1,0,1,1,0,1,1,0)] = 'X',
[BRLAPI_DOTS(1,0,1,1,1,1,1,0)] = 'Y',
[BRLAPI_DOTS(1,0,1,0,1,1,1,0)] = 'Z',
[BRLAPI_DOTS(0,0,1,0,1,1,0,0)] = '0',
[BRLAPI_DOTS(0,1,0,0,0,0,0,0)] = '1',
[BRLAPI_DOTS(0,1,1,0,0,0,0,0)] = '2',
[BRLAPI_DOTS(0,1,0,0,1,0,0,0)] = '3',
[BRLAPI_DOTS(0,1,0,0,1,1,0,0)] = '4',
[BRLAPI_DOTS(0,1,0,0,0,1,0,0)] = '5',
[BRLAPI_DOTS(0,1,1,0,1,0,0,0)] = '6',
[BRLAPI_DOTS(0,1,1,0,1,1,0,0)] = '7',
[BRLAPI_DOTS(0,1,1,0,0,1,0,0)] = '8',
[BRLAPI_DOTS(0,0,1,0,1,0,0,0)] = '9',
[BRLAPI_DOTS(0,0,0,1,0,1,0,0)] = '.',
[BRLAPI_DOTS(0,0,1,1,0,1,0,0)] = '+',
[BRLAPI_DOTS(0,0,1,0,0,1,0,0)] = '-',
[BRLAPI_DOTS(1,0,0,0,0,1,0,0)] = '*',
[BRLAPI_DOTS(0,0,1,1,0,0,0,0)] = '/',
[BRLAPI_DOTS(1,1,1,0,1,1,0,0)] = '(',
[BRLAPI_DOTS(0,1,1,1,1,1,0,0)] = ')',
[BRLAPI_DOTS(1,1,1,1,0,1,0,0)] = '&',
[BRLAPI_DOTS(0,0,1,1,1,1,0,0)] = '#',
[BRLAPI_DOTS(0,0,0,0,0,1,0,0)] = ',',
[BRLAPI_DOTS(0,0,0,0,1,1,0,0)] = ';',
[BRLAPI_DOTS(1,0,0,0,1,1,0,0)] = ':',
[BRLAPI_DOTS(0,1,1,1,0,1,0,0)] = '!',
[BRLAPI_DOTS(1,0,0,1,1,1,0,0)] = '?',
[BRLAPI_DOTS(0,0,0,0,1,0,0,0)] = '"',
[BRLAPI_DOTS(0,0,1,0,0,0,0,0)] ='\'',
[BRLAPI_DOTS(0,0,0,1,0,0,0,0)] = '`',
[BRLAPI_DOTS(0,0,0,1,1,0,1,0)] = '^',
[BRLAPI_DOTS(0,0,0,1,1,0,0,0)] = '~',
[BRLAPI_DOTS(0,1,0,1,0,1,1,0)] = '[',
[BRLAPI_DOTS(1,1,0,1,1,1,1,0)] = ']',
[BRLAPI_DOTS(0,1,0,1,0,1,0,0)] = '{',
[BRLAPI_DOTS(1,1,0,1,1,1,0,0)] = '}',
[BRLAPI_DOTS(1,1,1,1,1,1,0,0)] = '=',
[BRLAPI_DOTS(1,1,0,0,0,1,0,0)] = '<',
[BRLAPI_DOTS(0,0,1,1,1,0,0,0)] = '>',
[BRLAPI_DOTS(1,1,0,1,0,1,0,0)] = '$',
[BRLAPI_DOTS(1,0,0,1,0,1,0,0)] = '%',
[BRLAPI_DOTS(0,0,0,1,0,0,1,0)] = '@',
[BRLAPI_DOTS(1,1,0,0,1,1,0,0)] = '|',
[BRLAPI_DOTS(1,1,0,0,1,1,1,0)] ='\\',
[BRLAPI_DOTS(0,0,0,1,1,1,0,0)] = '_',
};
/* The serial port can receive more of our data */
static void baum_accept_input(struct CharDriverState *chr)
{
BaumDriverState *baum = chr->opaque;
int room, first;
if (!baum->out_buf_used)
return;
room = qemu_chr_be_can_write(chr);
if (!room)
return;
if (room > baum->out_buf_used)
room = baum->out_buf_used;
first = BUF_SIZE - baum->out_buf_ptr;
if (room > first) {
qemu_chr_be_write(chr, baum->out_buf + baum->out_buf_ptr, first);
baum->out_buf_ptr = 0;
baum->out_buf_used -= first;
room -= first;
}
qemu_chr_be_write(chr, baum->out_buf + baum->out_buf_ptr, room);
baum->out_buf_ptr += room;
baum->out_buf_used -= room;
}
/* We want to send a packet */
static void baum_write_packet(BaumDriverState *baum, const uint8_t *buf, int len)
{
uint8_t io_buf[1 + 2 * len], *cur = io_buf;
int room;
*cur++ = ESC;
while (len--)
if ((*cur++ = *buf++) == ESC)
*cur++ = ESC;
room = qemu_chr_be_can_write(baum->chr);
len = cur - io_buf;
if (len <= room) {
/* Fits */
qemu_chr_be_write(baum->chr, io_buf, len);
} else {
int first;
uint8_t out;
/* Can't fit all, send what can be, and store the rest. */
qemu_chr_be_write(baum->chr, io_buf, room);
len -= room;
cur = io_buf + room;
if (len > BUF_SIZE - baum->out_buf_used) {
/* Can't even store it, drop the previous data... */
assert(len <= BUF_SIZE);
baum->out_buf_used = 0;
baum->out_buf_ptr = 0;
}
out = baum->out_buf_ptr;
baum->out_buf_used += len;
first = BUF_SIZE - baum->out_buf_ptr;
if (len > first) {
memcpy(baum->out_buf + out, cur, first);
out = 0;
len -= first;
cur += first;
}
memcpy(baum->out_buf + out, cur, len);
}
}
/* Called when the other end seems to have a wrong idea of our display size */
static void baum_cellCount_timer_cb(void *opaque)
{
BaumDriverState *baum = opaque;
uint8_t cell_count[] = { BAUM_RSP_CellCount, baum->x * baum->y };
DPRINTF("Timeout waiting for DisplayData, sending cell count\n");
baum_write_packet(baum, cell_count, sizeof(cell_count));
}
/* Try to interpret a whole incoming packet */
static int baum_eat_packet(BaumDriverState *baum, const uint8_t *buf, int len)
{
const uint8_t *cur = buf;
uint8_t req = 0;
if (!len--)
return 0;
if (*cur++ != ESC) {
while (*cur != ESC) {
if (!len--)
return 0;
cur++;
}
DPRINTF("Dropped %d bytes!\n", cur - buf);
}
#define EAT(c) do {\
if (!len--) \
return 0; \
if ((c = *cur++) == ESC) { \
if (!len--) \
return 0; \
if (*cur++ != ESC) { \
DPRINTF("Broken packet %#2x, tossing\n", req); \
if (timer_pending(baum->cellCount_timer)) { \
timer_del(baum->cellCount_timer); \
baum_cellCount_timer_cb(baum); \
} \
return (cur - 2 - buf); \
} \
} \
} while (0)
EAT(req);
switch (req) {
case BAUM_REQ_DisplayData:
{
uint8_t cells[baum->x * baum->y], c;
uint8_t text[baum->x * baum->y];
uint8_t zero[baum->x * baum->y];
int cursor = BRLAPI_CURSOR_OFF;
int i;
/* Allow 100ms to complete the DisplayData packet */
timer_mod(baum->cellCount_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
get_ticks_per_sec() / 10);
for (i = 0; i < baum->x * baum->y ; i++) {
EAT(c);
cells[i] = c;
if ((c & (BRLAPI_DOT7|BRLAPI_DOT8))
== (BRLAPI_DOT7|BRLAPI_DOT8)) {
cursor = i + 1;
c &= ~(BRLAPI_DOT7|BRLAPI_DOT8);
}
if (!(c = nabcc_translation[c]))
c = '?';
text[i] = c;
}
timer_del(baum->cellCount_timer);
memset(zero, 0, sizeof(zero));
brlapi_writeArguments_t wa = {
.displayNumber = BRLAPI_DISPLAY_DEFAULT,
.regionBegin = 1,
.regionSize = baum->x * baum->y,
.text = (char *)text,
.textSize = baum->x * baum->y,
.andMask = zero,
.orMask = cells,
.cursor = cursor,
.charset = (char *)"ISO-8859-1",
};
if (brlapi__write(baum->brlapi, &wa) == -1)
brlapi_perror("baum brlapi_write");
break;
}
case BAUM_REQ_SetMode:
{
uint8_t mode, setting;
DPRINTF("SetMode\n");
EAT(mode);
EAT(setting);
/* ignore */
break;
}
case BAUM_REQ_SetProtocol:
{
uint8_t protocol;
DPRINTF("SetProtocol\n");
EAT(protocol);
/* ignore */
break;
}
case BAUM_REQ_GetDeviceIdentity:
{
uint8_t identity[17] = { BAUM_RSP_DeviceIdentity,
'B','a','u','m',' ','V','a','r','i','o' };
DPRINTF("GetDeviceIdentity\n");
identity[11] = '0' + baum->x / 10;
identity[12] = '0' + baum->x % 10;
baum_write_packet(baum, identity, sizeof(identity));
break;
}
case BAUM_REQ_GetVersionNumber:
{
uint8_t version[] = { BAUM_RSP_VersionNumber, 1 }; /* ? */
DPRINTF("GetVersionNumber\n");
baum_write_packet(baum, version, sizeof(version));
break;
}
case BAUM_REQ_GetSerialNumber:
{
uint8_t serial[] = { BAUM_RSP_SerialNumber,
'0','0','0','0','0','0','0','0' };
DPRINTF("GetSerialNumber\n");
baum_write_packet(baum, serial, sizeof(serial));
break;
}
case BAUM_REQ_GetKeys:
{
DPRINTF("Get%0#2x\n", req);
/* ignore */
break;
}
default:
DPRINTF("unrecognized request %0#2x\n", req);
do
if (!len--)
return 0;
while (*cur++ != ESC);
cur--;
break;
}
return cur - buf;
}
/* The other end is writing some data. Store it and try to interpret */
static int baum_write(CharDriverState *chr, const uint8_t *buf, int len)
{
BaumDriverState *baum = chr->opaque;
int tocopy, cur, eaten, orig_len = len;
if (!len)
return 0;
if (!baum->brlapi)
return len;
while (len) {
/* Complete our buffer as much as possible */
tocopy = len;
if (tocopy > BUF_SIZE - baum->in_buf_used)
tocopy = BUF_SIZE - baum->in_buf_used;
memcpy(baum->in_buf + baum->in_buf_used, buf, tocopy);
baum->in_buf_used += tocopy;
buf += tocopy;
len -= tocopy;
/* Interpret it as much as possible */
cur = 0;
while (cur < baum->in_buf_used &&
(eaten = baum_eat_packet(baum, baum->in_buf + cur, baum->in_buf_used - cur)))
cur += eaten;
/* Shift the remainder */
if (cur) {
memmove(baum->in_buf, baum->in_buf + cur, baum->in_buf_used - cur);
baum->in_buf_used -= cur;
}
/* And continue if any data left */
}
return orig_len;
}
/* Send the key code to the other end */
static void baum_send_key(BaumDriverState *baum, uint8_t type, uint8_t value) {
uint8_t packet[] = { type, value };
DPRINTF("writing key %x %x\n", type, value);
baum_write_packet(baum, packet, sizeof(packet));
}
/* We got some data on the BrlAPI socket */
static void baum_chr_read(void *opaque)
{
BaumDriverState *baum = opaque;
brlapi_keyCode_t code;
int ret;
if (!baum->brlapi)
return;
while ((ret = brlapi__readKey(baum->brlapi, 0, &code)) == 1) {
DPRINTF("got key %"BRLAPI_PRIxKEYCODE"\n", code);
/* Emulate */
switch (code & BRLAPI_KEY_TYPE_MASK) {
case BRLAPI_KEY_TYPE_CMD:
switch (code & BRLAPI_KEY_CMD_BLK_MASK) {
case BRLAPI_KEY_CMD_ROUTE:
baum_send_key(baum, BAUM_RSP_RoutingKey, (code & BRLAPI_KEY_CMD_ARG_MASK)+1);
baum_send_key(baum, BAUM_RSP_RoutingKey, 0);
break;
case 0:
switch (code & BRLAPI_KEY_CMD_ARG_MASK) {
case BRLAPI_KEY_CMD_FWINLT:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL2);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_FWINRT:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TR2);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_LNUP:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TR1);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_LNDN:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TR3);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_TOP:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL1|BAUM_TR1);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_BOT:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL3|BAUM_TR3);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_TOP_LEFT:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL2|BAUM_TR1);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_BOT_LEFT:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL2|BAUM_TR3);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_HOME:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL2|BAUM_TR1|BAUM_TR3);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
case BRLAPI_KEY_CMD_PREFMENU:
baum_send_key(baum, BAUM_RSP_TopKeys, BAUM_TL1|BAUM_TL3|BAUM_TR1);
baum_send_key(baum, BAUM_RSP_TopKeys, 0);
break;
}
}
break;
case BRLAPI_KEY_TYPE_SYM:
break;
}
}
if (ret == -1 && (brlapi_errno != BRLAPI_ERROR_LIBCERR || errno != EINTR)) {
brlapi_perror("baum: brlapi_readKey");
brlapi__closeConnection(baum->brlapi);
g_free(baum->brlapi);
baum->brlapi = NULL;
}
}
static void baum_close(struct CharDriverState *chr)
{
BaumDriverState *baum = chr->opaque;
timer_free(baum->cellCount_timer);
if (baum->brlapi) {
brlapi__closeConnection(baum->brlapi);
g_free(baum->brlapi);
}
g_free(baum);
}
CharDriverState *chr_baum_init(void)
{
BaumDriverState *baum;
CharDriverState *chr;
brlapi_handle_t *handle;
#if defined(CONFIG_SDL)
#if SDL_COMPILEDVERSION < SDL_VERSIONNUM(2, 0, 0)
SDL_SysWMinfo info;
#endif
#endif
int tty;
baum = g_malloc0(sizeof(BaumDriverState));
baum->chr = chr = qemu_chr_alloc();
chr->opaque = baum;
chr->chr_write = baum_write;
chr->chr_accept_input = baum_accept_input;
chr->chr_close = baum_close;
handle = g_malloc0(brlapi_getHandleSize());
baum->brlapi = handle;
baum->brlapi_fd = brlapi__openConnection(handle, NULL, NULL);
if (baum->brlapi_fd == -1) {
brlapi_perror("baum_init: brlapi_openConnection");
goto fail_handle;
}
baum->cellCount_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, baum_cellCount_timer_cb, baum);
if (brlapi__getDisplaySize(handle, &baum->x, &baum->y) == -1) {
brlapi_perror("baum_init: brlapi_getDisplaySize");
goto fail;
}
#if defined(CONFIG_SDL)
#if SDL_COMPILEDVERSION < SDL_VERSIONNUM(2, 0, 0)
memset(&info, 0, sizeof(info));
SDL_VERSION(&info.version);
if (SDL_GetWMInfo(&info))
tty = info.info.x11.wmwindow;
else
#endif
#endif
tty = BRLAPI_TTY_DEFAULT;
if (brlapi__enterTtyMode(handle, tty, NULL) == -1) {
brlapi_perror("baum_init: brlapi_enterTtyMode");
goto fail;
}
qemu_set_fd_handler(baum->brlapi_fd, baum_chr_read, NULL, baum);
return chr;
fail:
timer_free(baum->cellCount_timer);
brlapi__closeConnection(handle);
fail_handle:
g_free(handle);
g_free(chr);
g_free(baum);
return NULL;
}
static void register_types(void)
{
register_char_driver("braille", CHARDEV_BACKEND_KIND_BRAILLE, NULL);
}
type_init(register_types);

View File

@@ -1,401 +0,0 @@
/*
* QEMU Cryptodev backend for QEMU cipher APIs
*
* Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
*
* Authors:
* Gonglei <arei.gonglei@huawei.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "sysemu/cryptodev.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "standard-headers/linux/virtio_crypto.h"
#include "crypto/cipher.h"
/**
* @TYPE_CRYPTODEV_BACKEND_BUILTIN:
* name of backend that uses QEMU cipher API
*/
#define TYPE_CRYPTODEV_BACKEND_BUILTIN "cryptodev-backend-builtin"
#define CRYPTODEV_BACKEND_BUILTIN(obj) \
OBJECT_CHECK(CryptoDevBackendBuiltin, \
(obj), TYPE_CRYPTODEV_BACKEND_BUILTIN)
typedef struct CryptoDevBackendBuiltin
CryptoDevBackendBuiltin;
typedef struct CryptoDevBackendBuiltinSession {
QCryptoCipher *cipher;
uint8_t direction; /* encryption or decryption */
uint8_t type; /* cipher? hash? aead? */
QTAILQ_ENTRY(CryptoDevBackendBuiltinSession) next;
} CryptoDevBackendBuiltinSession;
/* Max number of symmetric sessions */
#define MAX_NUM_SESSIONS 256
#define CRYPTODEV_BUITLIN_MAX_AUTH_KEY_LEN 512
#define CRYPTODEV_BUITLIN_MAX_CIPHER_KEY_LEN 64
struct CryptoDevBackendBuiltin {
CryptoDevBackend parent_obj;
CryptoDevBackendBuiltinSession *sessions[MAX_NUM_SESSIONS];
};
static void cryptodev_builtin_init(
CryptoDevBackend *backend, Error **errp)
{
/* Only support one queue */
int queues = backend->conf.peers.queues;
CryptoDevBackendClient *cc;
if (queues != 1) {
error_setg(errp,
"Only support one queue in cryptdov-builtin backend");
return;
}
cc = cryptodev_backend_new_client(
"cryptodev-builtin", NULL);
cc->info_str = g_strdup_printf("cryptodev-builtin0");
cc->queue_index = 0;
cc->type = CRYPTODEV_BACKEND_TYPE_BUILTIN;
backend->conf.peers.ccs[0] = cc;
backend->conf.crypto_services =
1u << VIRTIO_CRYPTO_SERVICE_CIPHER |
1u << VIRTIO_CRYPTO_SERVICE_HASH |
1u << VIRTIO_CRYPTO_SERVICE_MAC;
backend->conf.cipher_algo_l = 1u << VIRTIO_CRYPTO_CIPHER_AES_CBC;
backend->conf.hash_algo = 1u << VIRTIO_CRYPTO_HASH_SHA1;
/*
* Set the Maximum length of crypto request.
* Why this value? Just avoid to overflow when
* memory allocation for each crypto request.
*/
backend->conf.max_size = LONG_MAX - sizeof(CryptoDevBackendSymOpInfo);
backend->conf.max_cipher_key_len = CRYPTODEV_BUITLIN_MAX_CIPHER_KEY_LEN;
backend->conf.max_auth_key_len = CRYPTODEV_BUITLIN_MAX_AUTH_KEY_LEN;
cryptodev_backend_set_ready(backend, true);
}
static int
cryptodev_builtin_get_unused_session_index(
CryptoDevBackendBuiltin *builtin)
{
size_t i;
for (i = 0; i < MAX_NUM_SESSIONS; i++) {
if (builtin->sessions[i] == NULL) {
return i;
}
}
return -1;
}
#define AES_KEYSIZE_128 16
#define AES_KEYSIZE_192 24
#define AES_KEYSIZE_256 32
#define AES_KEYSIZE_128_XTS AES_KEYSIZE_256
#define AES_KEYSIZE_256_XTS 64
static int
cryptodev_builtin_get_aes_algo(uint32_t key_len, int mode, Error **errp)
{
int algo;
if (key_len == AES_KEYSIZE_128) {
algo = QCRYPTO_CIPHER_ALG_AES_128;
} else if (key_len == AES_KEYSIZE_192) {
algo = QCRYPTO_CIPHER_ALG_AES_192;
} else if (key_len == AES_KEYSIZE_256) { /* equals AES_KEYSIZE_128_XTS */
if (mode == QCRYPTO_CIPHER_MODE_XTS) {
algo = QCRYPTO_CIPHER_ALG_AES_128;
} else {
algo = QCRYPTO_CIPHER_ALG_AES_256;
}
} else if (key_len == AES_KEYSIZE_256_XTS) {
if (mode == QCRYPTO_CIPHER_MODE_XTS) {
algo = QCRYPTO_CIPHER_ALG_AES_256;
} else {
goto err;
}
} else {
goto err;
}
return algo;
err:
error_setg(errp, "Unsupported key length :%u", key_len);
return -1;
}
static int cryptodev_builtin_create_cipher_session(
CryptoDevBackendBuiltin *builtin,
CryptoDevBackendSymSessionInfo *sess_info,
Error **errp)
{
int algo;
int mode;
QCryptoCipher *cipher;
int index;
CryptoDevBackendBuiltinSession *sess;
if (sess_info->op_type != VIRTIO_CRYPTO_SYM_OP_CIPHER) {
error_setg(errp, "Unsupported optype :%u", sess_info->op_type);
return -1;
}
index = cryptodev_builtin_get_unused_session_index(builtin);
if (index < 0) {
error_setg(errp, "Total number of sessions created exceeds %u",
MAX_NUM_SESSIONS);
return -1;
}
switch (sess_info->cipher_alg) {
case VIRTIO_CRYPTO_CIPHER_AES_ECB:
mode = QCRYPTO_CIPHER_MODE_ECB;
algo = cryptodev_builtin_get_aes_algo(sess_info->key_len,
mode, errp);
if (algo < 0) {
return -1;
}
break;
case VIRTIO_CRYPTO_CIPHER_AES_CBC:
mode = QCRYPTO_CIPHER_MODE_CBC;
algo = cryptodev_builtin_get_aes_algo(sess_info->key_len,
mode, errp);
if (algo < 0) {
return -1;
}
break;
case VIRTIO_CRYPTO_CIPHER_AES_CTR:
mode = QCRYPTO_CIPHER_MODE_CTR;
algo = cryptodev_builtin_get_aes_algo(sess_info->key_len,
mode, errp);
if (algo < 0) {
return -1;
}
break;
case VIRTIO_CRYPTO_CIPHER_AES_XTS:
mode = QCRYPTO_CIPHER_MODE_XTS;
algo = cryptodev_builtin_get_aes_algo(sess_info->key_len,
mode, errp);
if (algo < 0) {
return -1;
}
break;
case VIRTIO_CRYPTO_CIPHER_3DES_ECB:
mode = QCRYPTO_CIPHER_MODE_ECB;
algo = QCRYPTO_CIPHER_ALG_3DES;
break;
case VIRTIO_CRYPTO_CIPHER_3DES_CBC:
mode = QCRYPTO_CIPHER_MODE_CBC;
algo = QCRYPTO_CIPHER_ALG_3DES;
break;
case VIRTIO_CRYPTO_CIPHER_3DES_CTR:
mode = QCRYPTO_CIPHER_MODE_CTR;
algo = QCRYPTO_CIPHER_ALG_3DES;
break;
default:
error_setg(errp, "Unsupported cipher alg :%u",
sess_info->cipher_alg);
return -1;
}
cipher = qcrypto_cipher_new(algo, mode,
sess_info->cipher_key,
sess_info->key_len,
errp);
if (!cipher) {
return -1;
}
sess = g_new0(CryptoDevBackendBuiltinSession, 1);
sess->cipher = cipher;
sess->direction = sess_info->direction;
sess->type = sess_info->op_type;
builtin->sessions[index] = sess;
return index;
}
static int64_t cryptodev_builtin_sym_create_session(
CryptoDevBackend *backend,
CryptoDevBackendSymSessionInfo *sess_info,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendBuiltin *builtin =
CRYPTODEV_BACKEND_BUILTIN(backend);
int64_t session_id = -1;
int ret;
switch (sess_info->op_code) {
case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION:
ret = cryptodev_builtin_create_cipher_session(
builtin, sess_info, errp);
if (ret < 0) {
return ret;
} else {
session_id = ret;
}
break;
case VIRTIO_CRYPTO_HASH_CREATE_SESSION:
case VIRTIO_CRYPTO_MAC_CREATE_SESSION:
default:
error_setg(errp, "Unsupported opcode :%" PRIu32 "",
sess_info->op_code);
return -1;
}
return session_id;
}
static int cryptodev_builtin_sym_close_session(
CryptoDevBackend *backend,
uint64_t session_id,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendBuiltin *builtin =
CRYPTODEV_BACKEND_BUILTIN(backend);
if (session_id >= MAX_NUM_SESSIONS ||
builtin->sessions[session_id] == NULL) {
error_setg(errp, "Cannot find a valid session id: %" PRIu64 "",
session_id);
return -1;
}
qcrypto_cipher_free(builtin->sessions[session_id]->cipher);
g_free(builtin->sessions[session_id]);
builtin->sessions[session_id] = NULL;
return 0;
}
static int cryptodev_builtin_sym_operation(
CryptoDevBackend *backend,
CryptoDevBackendSymOpInfo *op_info,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendBuiltin *builtin =
CRYPTODEV_BACKEND_BUILTIN(backend);
CryptoDevBackendBuiltinSession *sess;
int ret;
if (op_info->session_id >= MAX_NUM_SESSIONS ||
builtin->sessions[op_info->session_id] == NULL) {
error_setg(errp, "Cannot find a valid session id: %" PRIu64 "",
op_info->session_id);
return -VIRTIO_CRYPTO_INVSESS;
}
if (op_info->op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
error_setg(errp,
"Algorithm chain is unsupported for cryptdoev-builtin");
return -VIRTIO_CRYPTO_NOTSUPP;
}
sess = builtin->sessions[op_info->session_id];
if (op_info->iv_len > 0) {
ret = qcrypto_cipher_setiv(sess->cipher, op_info->iv,
op_info->iv_len, errp);
if (ret < 0) {
return -VIRTIO_CRYPTO_ERR;
}
}
if (sess->direction == VIRTIO_CRYPTO_OP_ENCRYPT) {
ret = qcrypto_cipher_encrypt(sess->cipher, op_info->src,
op_info->dst, op_info->src_len, errp);
if (ret < 0) {
return -VIRTIO_CRYPTO_ERR;
}
} else {
ret = qcrypto_cipher_decrypt(sess->cipher, op_info->src,
op_info->dst, op_info->src_len, errp);
if (ret < 0) {
return -VIRTIO_CRYPTO_ERR;
}
}
return VIRTIO_CRYPTO_OK;
}
static void cryptodev_builtin_cleanup(
CryptoDevBackend *backend,
Error **errp)
{
CryptoDevBackendBuiltin *builtin =
CRYPTODEV_BACKEND_BUILTIN(backend);
size_t i;
int queues = backend->conf.peers.queues;
CryptoDevBackendClient *cc;
for (i = 0; i < MAX_NUM_SESSIONS; i++) {
if (builtin->sessions[i] != NULL) {
cryptodev_builtin_sym_close_session(
backend, i, 0, errp);
}
}
for (i = 0; i < queues; i++) {
cc = backend->conf.peers.ccs[i];
if (cc) {
cryptodev_backend_free_client(cc);
backend->conf.peers.ccs[i] = NULL;
}
}
cryptodev_backend_set_ready(backend, false);
}
static void
cryptodev_builtin_class_init(ObjectClass *oc, void *data)
{
CryptoDevBackendClass *bc = CRYPTODEV_BACKEND_CLASS(oc);
bc->init = cryptodev_builtin_init;
bc->cleanup = cryptodev_builtin_cleanup;
bc->create_session = cryptodev_builtin_sym_create_session;
bc->close_session = cryptodev_builtin_sym_close_session;
bc->do_sym_op = cryptodev_builtin_sym_operation;
}
static const TypeInfo cryptodev_builtin_info = {
.name = TYPE_CRYPTODEV_BACKEND_BUILTIN,
.parent = TYPE_CRYPTODEV_BACKEND,
.class_init = cryptodev_builtin_class_init,
.instance_size = sizeof(CryptoDevBackendBuiltin),
};
static void
cryptodev_builtin_register_types(void)
{
type_register_static(&cryptodev_builtin_info);
}
type_init(cryptodev_builtin_register_types);

View File

@@ -1,390 +0,0 @@
/*
* QEMU Cryptodev backend for QEMU cipher APIs
*
* Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
*
* Authors:
* Gonglei <arei.gonglei@huawei.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
#include "hw/virtio/vhost-user.h"
#include "standard-headers/linux/virtio_crypto.h"
#include "sysemu/cryptodev-vhost.h"
#include "chardev/char-fe.h"
#include "sysemu/cryptodev-vhost-user.h"
/**
* @TYPE_CRYPTODEV_BACKEND_VHOST_USER:
* name of backend that uses vhost user server
*/
#define TYPE_CRYPTODEV_BACKEND_VHOST_USER "cryptodev-vhost-user"
#define CRYPTODEV_BACKEND_VHOST_USER(obj) \
OBJECT_CHECK(CryptoDevBackendVhostUser, \
(obj), TYPE_CRYPTODEV_BACKEND_VHOST_USER)
typedef struct CryptoDevBackendVhostUser {
CryptoDevBackend parent_obj;
VhostUserState *vhost_user;
CharBackend chr;
char *chr_name;
bool opened;
CryptoDevBackendVhost *vhost_crypto[MAX_CRYPTO_QUEUE_NUM];
} CryptoDevBackendVhostUser;
static int
cryptodev_vhost_user_running(
CryptoDevBackendVhost *crypto)
{
return crypto ? 1 : 0;
}
CryptoDevBackendVhost *
cryptodev_vhost_user_get_vhost(
CryptoDevBackendClient *cc,
CryptoDevBackend *b,
uint16_t queue)
{
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(b);
assert(cc->type == CRYPTODEV_BACKEND_TYPE_VHOST_USER);
assert(queue < MAX_CRYPTO_QUEUE_NUM);
return s->vhost_crypto[queue];
}
static void cryptodev_vhost_user_stop(int queues,
CryptoDevBackendVhostUser *s)
{
size_t i;
for (i = 0; i < queues; i++) {
if (!cryptodev_vhost_user_running(s->vhost_crypto[i])) {
continue;
}
cryptodev_vhost_cleanup(s->vhost_crypto[i]);
s->vhost_crypto[i] = NULL;
}
}
static int
cryptodev_vhost_user_start(int queues,
CryptoDevBackendVhostUser *s)
{
CryptoDevBackendVhostOptions options;
CryptoDevBackend *b = CRYPTODEV_BACKEND(s);
int max_queues;
size_t i;
for (i = 0; i < queues; i++) {
if (cryptodev_vhost_user_running(s->vhost_crypto[i])) {
continue;
}
options.opaque = s->vhost_user;
options.backend_type = VHOST_BACKEND_TYPE_USER;
options.cc = b->conf.peers.ccs[i];
s->vhost_crypto[i] = cryptodev_vhost_init(&options);
if (!s->vhost_crypto[i]) {
error_report("failed to init vhost_crypto for queue %zu", i);
goto err;
}
if (i == 0) {
max_queues =
cryptodev_vhost_get_max_queues(s->vhost_crypto[i]);
if (queues > max_queues) {
error_report("you are asking more queues than supported: %d",
max_queues);
goto err;
}
}
}
return 0;
err:
cryptodev_vhost_user_stop(i + 1, s);
return -1;
}
static Chardev *
cryptodev_vhost_claim_chardev(CryptoDevBackendVhostUser *s,
Error **errp)
{
Chardev *chr;
if (s->chr_name == NULL) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
"chardev", "a valid character device");
return NULL;
}
chr = qemu_chr_find(s->chr_name);
if (chr == NULL) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", s->chr_name);
return NULL;
}
return chr;
}
static void cryptodev_vhost_user_event(void *opaque, int event)
{
CryptoDevBackendVhostUser *s = opaque;
CryptoDevBackend *b = CRYPTODEV_BACKEND(s);
int queues = b->conf.peers.queues;
assert(queues < MAX_CRYPTO_QUEUE_NUM);
switch (event) {
case CHR_EVENT_OPENED:
if (cryptodev_vhost_user_start(queues, s) < 0) {
exit(1);
}
b->ready = true;
break;
case CHR_EVENT_CLOSED:
b->ready = false;
cryptodev_vhost_user_stop(queues, s);
break;
}
}
static void cryptodev_vhost_user_init(
CryptoDevBackend *backend, Error **errp)
{
int queues = backend->conf.peers.queues;
size_t i;
Error *local_err = NULL;
Chardev *chr;
VhostUserState *user;
CryptoDevBackendClient *cc;
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(backend);
chr = cryptodev_vhost_claim_chardev(s, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
s->opened = true;
for (i = 0; i < queues; i++) {
cc = cryptodev_backend_new_client(
"cryptodev-vhost-user", NULL);
cc->info_str = g_strdup_printf("cryptodev-vhost-user%zu to %s ",
i, chr->label);
cc->queue_index = i;
cc->type = CRYPTODEV_BACKEND_TYPE_VHOST_USER;
backend->conf.peers.ccs[i] = cc;
if (i == 0) {
if (!qemu_chr_fe_init(&s->chr, chr, &local_err)) {
error_propagate(errp, local_err);
return;
}
}
}
user = vhost_user_init();
if (!user) {
error_setg(errp, "Failed to init vhost_user");
return;
}
user->chr = &s->chr;
s->vhost_user = user;
qemu_chr_fe_set_handlers(&s->chr, NULL, NULL,
cryptodev_vhost_user_event, NULL, s, NULL, true);
backend->conf.crypto_services =
1u << VIRTIO_CRYPTO_SERVICE_CIPHER |
1u << VIRTIO_CRYPTO_SERVICE_HASH |
1u << VIRTIO_CRYPTO_SERVICE_MAC;
backend->conf.cipher_algo_l = 1u << VIRTIO_CRYPTO_CIPHER_AES_CBC;
backend->conf.hash_algo = 1u << VIRTIO_CRYPTO_HASH_SHA1;
backend->conf.max_size = UINT64_MAX;
backend->conf.max_cipher_key_len = VHOST_USER_MAX_CIPHER_KEY_LEN;
backend->conf.max_auth_key_len = VHOST_USER_MAX_AUTH_KEY_LEN;
}
static int64_t cryptodev_vhost_user_sym_create_session(
CryptoDevBackend *backend,
CryptoDevBackendSymSessionInfo *sess_info,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendClient *cc =
backend->conf.peers.ccs[queue_index];
CryptoDevBackendVhost *vhost_crypto;
uint64_t session_id = 0;
int ret;
vhost_crypto = cryptodev_vhost_user_get_vhost(cc, backend, queue_index);
if (vhost_crypto) {
struct vhost_dev *dev = &(vhost_crypto->dev);
ret = dev->vhost_ops->vhost_crypto_create_session(dev,
sess_info,
&session_id);
if (ret < 0) {
return -1;
} else {
return session_id;
}
}
return -1;
}
static int cryptodev_vhost_user_sym_close_session(
CryptoDevBackend *backend,
uint64_t session_id,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendClient *cc =
backend->conf.peers.ccs[queue_index];
CryptoDevBackendVhost *vhost_crypto;
int ret;
vhost_crypto = cryptodev_vhost_user_get_vhost(cc, backend, queue_index);
if (vhost_crypto) {
struct vhost_dev *dev = &(vhost_crypto->dev);
ret = dev->vhost_ops->vhost_crypto_close_session(dev,
session_id);
if (ret < 0) {
return -1;
} else {
return 0;
}
}
return -1;
}
static void cryptodev_vhost_user_cleanup(
CryptoDevBackend *backend,
Error **errp)
{
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(backend);
size_t i;
int queues = backend->conf.peers.queues;
CryptoDevBackendClient *cc;
cryptodev_vhost_user_stop(queues, s);
for (i = 0; i < queues; i++) {
cc = backend->conf.peers.ccs[i];
if (cc) {
cryptodev_backend_free_client(cc);
backend->conf.peers.ccs[i] = NULL;
}
}
if (s->vhost_user) {
vhost_user_cleanup(s->vhost_user);
g_free(s->vhost_user);
s->vhost_user = NULL;
}
}
static void cryptodev_vhost_user_set_chardev(Object *obj,
const char *value, Error **errp)
{
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(obj);
if (s->opened) {
error_setg(errp, QERR_PERMISSION_DENIED);
} else {
g_free(s->chr_name);
s->chr_name = g_strdup(value);
}
}
static char *
cryptodev_vhost_user_get_chardev(Object *obj, Error **errp)
{
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(obj);
Chardev *chr = qemu_chr_fe_get_driver(&s->chr);
if (chr && chr->label) {
return g_strdup(chr->label);
}
return NULL;
}
static void cryptodev_vhost_user_instance_int(Object *obj)
{
object_property_add_str(obj, "chardev",
cryptodev_vhost_user_get_chardev,
cryptodev_vhost_user_set_chardev,
NULL);
}
static void cryptodev_vhost_user_finalize(Object *obj)
{
CryptoDevBackendVhostUser *s =
CRYPTODEV_BACKEND_VHOST_USER(obj);
qemu_chr_fe_deinit(&s->chr, false);
g_free(s->chr_name);
}
static void
cryptodev_vhost_user_class_init(ObjectClass *oc, void *data)
{
CryptoDevBackendClass *bc = CRYPTODEV_BACKEND_CLASS(oc);
bc->init = cryptodev_vhost_user_init;
bc->cleanup = cryptodev_vhost_user_cleanup;
bc->create_session = cryptodev_vhost_user_sym_create_session;
bc->close_session = cryptodev_vhost_user_sym_close_session;
bc->do_sym_op = NULL;
}
static const TypeInfo cryptodev_vhost_user_info = {
.name = TYPE_CRYPTODEV_BACKEND_VHOST_USER,
.parent = TYPE_CRYPTODEV_BACKEND,
.class_init = cryptodev_vhost_user_class_init,
.instance_init = cryptodev_vhost_user_instance_int,
.instance_finalize = cryptodev_vhost_user_finalize,
.instance_size = sizeof(CryptoDevBackendVhostUser),
};
static void
cryptodev_vhost_user_register_types(void)
{
type_register_static(&cryptodev_vhost_user_info);
}
type_init(cryptodev_vhost_user_register_types);

View File

@@ -1,347 +0,0 @@
/*
* QEMU Cryptodev backend for QEMU cipher APIs
*
* Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
*
* Authors:
* Gonglei <arei.gonglei@huawei.com>
* Jay Zhou <jianjay.zhou@huawei.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "hw/virtio/virtio-bus.h"
#include "sysemu/cryptodev-vhost.h"
#ifdef CONFIG_VHOST_CRYPTO
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
#include "hw/virtio/virtio-crypto.h"
#include "sysemu/cryptodev-vhost-user.h"
uint64_t
cryptodev_vhost_get_max_queues(
CryptoDevBackendVhost *crypto)
{
return crypto->dev.max_queues;
}
void cryptodev_vhost_cleanup(CryptoDevBackendVhost *crypto)
{
vhost_dev_cleanup(&crypto->dev);
g_free(crypto);
}
struct CryptoDevBackendVhost *
cryptodev_vhost_init(
CryptoDevBackendVhostOptions *options)
{
int r;
CryptoDevBackendVhost *crypto;
crypto = g_new(CryptoDevBackendVhost, 1);
crypto->dev.max_queues = 1;
crypto->dev.nvqs = 1;
crypto->dev.vqs = crypto->vqs;
crypto->cc = options->cc;
crypto->dev.protocol_features = 0;
crypto->backend = -1;
/* vhost-user needs vq_index to initiate a specific queue pair */
crypto->dev.vq_index = crypto->cc->queue_index * crypto->dev.nvqs;
r = vhost_dev_init(&crypto->dev, options->opaque, options->backend_type, 0);
if (r < 0) {
goto fail;
}
return crypto;
fail:
g_free(crypto);
return NULL;
}
static int
cryptodev_vhost_start_one(CryptoDevBackendVhost *crypto,
VirtIODevice *dev)
{
int r;
crypto->dev.nvqs = 1;
crypto->dev.vqs = crypto->vqs;
r = vhost_dev_enable_notifiers(&crypto->dev, dev);
if (r < 0) {
goto fail_notifiers;
}
r = vhost_dev_start(&crypto->dev, dev);
if (r < 0) {
goto fail_start;
}
return 0;
fail_start:
vhost_dev_disable_notifiers(&crypto->dev, dev);
fail_notifiers:
return r;
}
static void
cryptodev_vhost_stop_one(CryptoDevBackendVhost *crypto,
VirtIODevice *dev)
{
vhost_dev_stop(&crypto->dev, dev);
vhost_dev_disable_notifiers(&crypto->dev, dev);
}
CryptoDevBackendVhost *
cryptodev_get_vhost(CryptoDevBackendClient *cc,
CryptoDevBackend *b,
uint16_t queue)
{
CryptoDevBackendVhost *vhost_crypto = NULL;
if (!cc) {
return NULL;
}
switch (cc->type) {
#if defined(CONFIG_VHOST_USER) && defined(CONFIG_LINUX)
case CRYPTODEV_BACKEND_TYPE_VHOST_USER:
vhost_crypto = cryptodev_vhost_user_get_vhost(cc, b, queue);
break;
#endif
default:
break;
}
return vhost_crypto;
}
static void
cryptodev_vhost_set_vq_index(CryptoDevBackendVhost *crypto,
int vq_index)
{
crypto->dev.vq_index = vq_index;
}
static int
vhost_set_vring_enable(CryptoDevBackendClient *cc,
CryptoDevBackend *b,
uint16_t queue, int enable)
{
CryptoDevBackendVhost *crypto =
cryptodev_get_vhost(cc, b, queue);
const VhostOps *vhost_ops;
cc->vring_enable = enable;
if (!crypto) {
return 0;
}
vhost_ops = crypto->dev.vhost_ops;
if (vhost_ops->vhost_set_vring_enable) {
return vhost_ops->vhost_set_vring_enable(&crypto->dev, enable);
}
return 0;
}
int cryptodev_vhost_start(VirtIODevice *dev, int total_queues)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev);
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(dev)));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(vbus);
int r, e;
int i;
CryptoDevBackend *b = vcrypto->cryptodev;
CryptoDevBackendVhost *vhost_crypto;
CryptoDevBackendClient *cc;
if (!k->set_guest_notifiers) {
error_report("binding does not support guest notifiers");
return -ENOSYS;
}
for (i = 0; i < total_queues; i++) {
cc = b->conf.peers.ccs[i];
vhost_crypto = cryptodev_get_vhost(cc, b, i);
cryptodev_vhost_set_vq_index(vhost_crypto, i);
/* Suppress the masking guest notifiers on vhost user
* because vhost user doesn't interrupt masking/unmasking
* properly.
*/
if (cc->type == CRYPTODEV_BACKEND_TYPE_VHOST_USER) {
dev->use_guest_notifier_mask = false;
}
}
r = k->set_guest_notifiers(qbus->parent, total_queues, true);
if (r < 0) {
error_report("error binding guest notifier: %d", -r);
goto err;
}
for (i = 0; i < total_queues; i++) {
cc = b->conf.peers.ccs[i];
vhost_crypto = cryptodev_get_vhost(cc, b, i);
r = cryptodev_vhost_start_one(vhost_crypto, dev);
if (r < 0) {
goto err_start;
}
if (cc->vring_enable) {
/* restore vring enable state */
r = vhost_set_vring_enable(cc, b, i, cc->vring_enable);
if (r < 0) {
goto err_start;
}
}
}
return 0;
err_start:
while (--i >= 0) {
cc = b->conf.peers.ccs[i];
vhost_crypto = cryptodev_get_vhost(cc, b, i);
cryptodev_vhost_stop_one(vhost_crypto, dev);
}
e = k->set_guest_notifiers(qbus->parent, total_queues, false);
if (e < 0) {
error_report("vhost guest notifier cleanup failed: %d", e);
}
err:
return r;
}
void cryptodev_vhost_stop(VirtIODevice *dev, int total_queues)
{
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(dev)));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(vbus);
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev);
CryptoDevBackend *b = vcrypto->cryptodev;
CryptoDevBackendVhost *vhost_crypto;
CryptoDevBackendClient *cc;
size_t i;
int r;
for (i = 0; i < total_queues; i++) {
cc = b->conf.peers.ccs[i];
vhost_crypto = cryptodev_get_vhost(cc, b, i);
cryptodev_vhost_stop_one(vhost_crypto, dev);
}
r = k->set_guest_notifiers(qbus->parent, total_queues, false);
if (r < 0) {
error_report("vhost guest notifier cleanup failed: %d", r);
}
assert(r >= 0);
}
void cryptodev_vhost_virtqueue_mask(VirtIODevice *dev,
int queue,
int idx, bool mask)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev);
CryptoDevBackend *b = vcrypto->cryptodev;
CryptoDevBackendVhost *vhost_crypto;
CryptoDevBackendClient *cc;
assert(queue < MAX_CRYPTO_QUEUE_NUM);
cc = b->conf.peers.ccs[queue];
vhost_crypto = cryptodev_get_vhost(cc, b, queue);
vhost_virtqueue_mask(&vhost_crypto->dev, dev, idx, mask);
}
bool cryptodev_vhost_virtqueue_pending(VirtIODevice *dev,
int queue, int idx)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev);
CryptoDevBackend *b = vcrypto->cryptodev;
CryptoDevBackendVhost *vhost_crypto;
CryptoDevBackendClient *cc;
assert(queue < MAX_CRYPTO_QUEUE_NUM);
cc = b->conf.peers.ccs[queue];
vhost_crypto = cryptodev_get_vhost(cc, b, queue);
return vhost_virtqueue_pending(&vhost_crypto->dev, idx);
}
#else
uint64_t
cryptodev_vhost_get_max_queues(CryptoDevBackendVhost *crypto)
{
return 0;
}
void cryptodev_vhost_cleanup(CryptoDevBackendVhost *crypto)
{
}
struct CryptoDevBackendVhost *
cryptodev_vhost_init(CryptoDevBackendVhostOptions *options)
{
return NULL;
}
CryptoDevBackendVhost *
cryptodev_get_vhost(CryptoDevBackendClient *cc,
CryptoDevBackend *b,
uint16_t queue)
{
return NULL;
}
int cryptodev_vhost_start(VirtIODevice *dev, int total_queues)
{
return -1;
}
void cryptodev_vhost_stop(VirtIODevice *dev, int total_queues)
{
}
void cryptodev_vhost_virtqueue_mask(VirtIODevice *dev,
int queue,
int idx, bool mask)
{
}
bool cryptodev_vhost_virtqueue_pending(VirtIODevice *dev,
int queue, int idx)
{
return false;
}
#endif

View File

@@ -1,269 +0,0 @@
/*
* QEMU Crypto Device Implementation
*
* Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
*
* Authors:
* Gonglei <arei.gonglei@huawei.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "sysemu/cryptodev.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "qemu/config-file.h"
#include "qom/object_interfaces.h"
#include "hw/virtio/virtio-crypto.h"
static QTAILQ_HEAD(, CryptoDevBackendClient) crypto_clients;
CryptoDevBackendClient *
cryptodev_backend_new_client(const char *model,
const char *name)
{
CryptoDevBackendClient *cc;
cc = g_malloc0(sizeof(CryptoDevBackendClient));
cc->model = g_strdup(model);
if (name) {
cc->name = g_strdup(name);
}
QTAILQ_INSERT_TAIL(&crypto_clients, cc, next);
return cc;
}
void cryptodev_backend_free_client(
CryptoDevBackendClient *cc)
{
QTAILQ_REMOVE(&crypto_clients, cc, next);
g_free(cc->name);
g_free(cc->model);
g_free(cc->info_str);
g_free(cc);
}
void cryptodev_backend_cleanup(
CryptoDevBackend *backend,
Error **errp)
{
CryptoDevBackendClass *bc =
CRYPTODEV_BACKEND_GET_CLASS(backend);
if (bc->cleanup) {
bc->cleanup(backend, errp);
}
}
int64_t cryptodev_backend_sym_create_session(
CryptoDevBackend *backend,
CryptoDevBackendSymSessionInfo *sess_info,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendClass *bc =
CRYPTODEV_BACKEND_GET_CLASS(backend);
if (bc->create_session) {
return bc->create_session(backend, sess_info, queue_index, errp);
}
return -1;
}
int cryptodev_backend_sym_close_session(
CryptoDevBackend *backend,
uint64_t session_id,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendClass *bc =
CRYPTODEV_BACKEND_GET_CLASS(backend);
if (bc->close_session) {
return bc->close_session(backend, session_id, queue_index, errp);
}
return -1;
}
static int cryptodev_backend_sym_operation(
CryptoDevBackend *backend,
CryptoDevBackendSymOpInfo *op_info,
uint32_t queue_index, Error **errp)
{
CryptoDevBackendClass *bc =
CRYPTODEV_BACKEND_GET_CLASS(backend);
if (bc->do_sym_op) {
return bc->do_sym_op(backend, op_info, queue_index, errp);
}
return -VIRTIO_CRYPTO_ERR;
}
int cryptodev_backend_crypto_operation(
CryptoDevBackend *backend,
void *opaque,
uint32_t queue_index, Error **errp)
{
VirtIOCryptoReq *req = opaque;
if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) {
CryptoDevBackendSymOpInfo *op_info;
op_info = req->u.sym_op_info;
return cryptodev_backend_sym_operation(backend,
op_info, queue_index, errp);
} else {
error_setg(errp, "Unsupported cryptodev alg type: %" PRIu32 "",
req->flags);
return -VIRTIO_CRYPTO_NOTSUPP;
}
return -VIRTIO_CRYPTO_ERR;
}
static void
cryptodev_backend_get_queues(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
CryptoDevBackend *backend = CRYPTODEV_BACKEND(obj);
uint32_t value = backend->conf.peers.queues;
visit_type_uint32(v, name, &value, errp);
}
static void
cryptodev_backend_set_queues(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
CryptoDevBackend *backend = CRYPTODEV_BACKEND(obj);
Error *local_err = NULL;
uint32_t value;
visit_type_uint32(v, name, &value, &local_err);
if (local_err) {
goto out;
}
if (!value) {
error_setg(&local_err, "Property '%s.%s' doesn't take value '%"
PRIu32 "'", object_get_typename(obj), name, value);
goto out;
}
backend->conf.peers.queues = value;
out:
error_propagate(errp, local_err);
}
static void
cryptodev_backend_complete(UserCreatable *uc, Error **errp)
{
CryptoDevBackend *backend = CRYPTODEV_BACKEND(uc);
CryptoDevBackendClass *bc = CRYPTODEV_BACKEND_GET_CLASS(uc);
Error *local_err = NULL;
if (bc->init) {
bc->init(backend, &local_err);
if (local_err) {
goto out;
}
}
return;
out:
error_propagate(errp, local_err);
}
void cryptodev_backend_set_used(CryptoDevBackend *backend, bool used)
{
backend->is_used = used;
}
bool cryptodev_backend_is_used(CryptoDevBackend *backend)
{
return backend->is_used;
}
void cryptodev_backend_set_ready(CryptoDevBackend *backend, bool ready)
{
backend->ready = ready;
}
bool cryptodev_backend_is_ready(CryptoDevBackend *backend)
{
return backend->ready;
}
static bool
cryptodev_backend_can_be_deleted(UserCreatable *uc)
{
return !cryptodev_backend_is_used(CRYPTODEV_BACKEND(uc));
}
static void cryptodev_backend_instance_init(Object *obj)
{
object_property_add(obj, "queues", "uint32",
cryptodev_backend_get_queues,
cryptodev_backend_set_queues,
NULL, NULL, NULL);
/* Initialize devices' queues property to 1 */
object_property_set_int(obj, 1, "queues", NULL);
}
static void cryptodev_backend_finalize(Object *obj)
{
CryptoDevBackend *backend = CRYPTODEV_BACKEND(obj);
cryptodev_backend_cleanup(backend, NULL);
}
static void
cryptodev_backend_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
ucc->complete = cryptodev_backend_complete;
ucc->can_be_deleted = cryptodev_backend_can_be_deleted;
QTAILQ_INIT(&crypto_clients);
}
static const TypeInfo cryptodev_backend_info = {
.name = TYPE_CRYPTODEV_BACKEND,
.parent = TYPE_OBJECT,
.instance_size = sizeof(CryptoDevBackend),
.instance_init = cryptodev_backend_instance_init,
.instance_finalize = cryptodev_backend_finalize,
.class_size = sizeof(CryptoDevBackendClass),
.class_init = cryptodev_backend_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
cryptodev_backend_register_types(void)
{
type_register_static(&cryptodev_backend_info);
}
type_init(cryptodev_backend_register_types);

View File

@@ -9,10 +9,7 @@
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu-common.h"
#include "qemu/error-report.h"
#include "sysemu/hostmem.h"
#include "sysemu/sysemu.h"
#include "qom/object_interfaces.h"
@@ -32,19 +29,14 @@ typedef struct HostMemoryBackendFile HostMemoryBackendFile;
struct HostMemoryBackendFile {
HostMemoryBackend parent_obj;
bool share;
char *mem_path;
uint64_t align;
bool discard_data;
bool is_pmem;
};
static void
file_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
{
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(backend);
#ifdef CONFIG_POSIX
gchar *name;
#endif
if (!backend->size) {
error_setg(errp, "can't create backend with size 0");
@@ -54,21 +46,27 @@ file_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
error_setg(errp, "mem-path property not set");
return;
}
#ifndef CONFIG_POSIX
#ifndef CONFIG_LINUX
error_setg(errp, "-mem-path not supported on this host");
#else
backend->force_prealloc = mem_prealloc;
name = host_memory_backend_get_name(backend);
memory_region_init_ram_from_file(&backend->mr, OBJECT(backend),
name,
backend->size, fb->align,
(backend->share ? RAM_SHARED : 0) |
(fb->is_pmem ? RAM_PMEM : 0),
fb->mem_path, errp);
g_free(name);
if (!memory_region_size(&backend->mr)) {
backend->force_prealloc = mem_prealloc;
memory_region_init_ram_from_file(&backend->mr, OBJECT(backend),
object_get_canonical_path(OBJECT(backend)),
backend->size, fb->share,
fb->mem_path, errp);
}
#endif
}
static void
file_backend_class_init(ObjectClass *oc, void *data)
{
HostMemoryBackendClass *bc = MEMORY_BACKEND_CLASS(oc);
bc->alloc = file_backend_memory_alloc;
}
static char *get_mem_path(Object *o, Error **errp)
{
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
@@ -81,142 +79,50 @@ static void set_mem_path(Object *o, const char *str, Error **errp)
HostMemoryBackend *backend = MEMORY_BACKEND(o);
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property 'mem-path' of %s",
object_get_typename(o));
if (memory_region_size(&backend->mr)) {
error_setg(errp, "cannot change property value");
return;
}
g_free(fb->mem_path);
if (fb->mem_path) {
g_free(fb->mem_path);
}
fb->mem_path = g_strdup(str);
}
static bool file_memory_backend_get_discard_data(Object *o, Error **errp)
{
return MEMORY_BACKEND_FILE(o)->discard_data;
}
static void file_memory_backend_set_discard_data(Object *o, bool value,
Error **errp)
{
MEMORY_BACKEND_FILE(o)->discard_data = value;
}
static void file_memory_backend_get_align(Object *o, Visitor *v,
const char *name, void *opaque,
Error **errp)
static bool file_memory_backend_get_share(Object *o, Error **errp)
{
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
uint64_t val = fb->align;
visit_type_size(v, name, &val, errp);
return fb->share;
}
static void file_memory_backend_set_align(Object *o, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
Error *local_err = NULL;
uint64_t val;
if (host_memory_backend_mr_inited(backend)) {
error_setg(&local_err, "cannot change property '%s' of %s",
name, object_get_typename(o));
goto out;
}
visit_type_size(v, name, &val, &local_err);
if (local_err) {
goto out;
}
fb->align = val;
out:
error_propagate(errp, local_err);
}
static bool file_memory_backend_get_pmem(Object *o, Error **errp)
{
return MEMORY_BACKEND_FILE(o)->is_pmem;
}
static void file_memory_backend_set_pmem(Object *o, bool value, Error **errp)
static void file_memory_backend_set_share(Object *o, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property 'pmem' of %s.",
object_get_typename(o));
if (memory_region_size(&backend->mr)) {
error_setg(errp, "cannot change property value");
return;
}
#ifndef CONFIG_LIBPMEM
if (value) {
Error *local_err = NULL;
error_setg(&local_err,
"Lack of libpmem support while setting the 'pmem=on'"
" of %s. We can't ensure data persistence.",
object_get_typename(o));
error_propagate(errp, local_err);
return;
}
#endif
fb->is_pmem = value;
}
static void file_backend_unparent(Object *obj)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(obj);
if (host_memory_backend_mr_inited(backend) && fb->discard_data) {
void *ptr = memory_region_get_ram_ptr(&backend->mr);
uint64_t sz = memory_region_size(&backend->mr);
qemu_madvise(ptr, sz, QEMU_MADV_REMOVE);
}
fb->share = value;
}
static void
file_backend_class_init(ObjectClass *oc, void *data)
file_backend_instance_init(Object *o)
{
HostMemoryBackendClass *bc = MEMORY_BACKEND_CLASS(oc);
bc->alloc = file_backend_memory_alloc;
oc->unparent = file_backend_unparent;
object_class_property_add_bool(oc, "discard-data",
file_memory_backend_get_discard_data, file_memory_backend_set_discard_data,
&error_abort);
object_class_property_add_str(oc, "mem-path",
get_mem_path, set_mem_path,
&error_abort);
object_class_property_add(oc, "align", "int",
file_memory_backend_get_align,
file_memory_backend_set_align,
NULL, NULL, &error_abort);
object_class_property_add_bool(oc, "pmem",
file_memory_backend_get_pmem, file_memory_backend_set_pmem,
&error_abort);
}
static void file_backend_instance_finalize(Object *o)
{
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
g_free(fb->mem_path);
object_property_add_bool(o, "share",
file_memory_backend_get_share,
file_memory_backend_set_share, NULL);
object_property_add_str(o, "mem-path", get_mem_path,
set_mem_path, NULL);
}
static const TypeInfo file_backend_info = {
.name = TYPE_MEMORY_BACKEND_FILE,
.parent = TYPE_MEMORY_BACKEND,
.class_init = file_backend_class_init,
.instance_finalize = file_backend_instance_finalize,
.instance_init = file_backend_instance_init,
.instance_size = sizeof(HostMemoryBackendFile),
};

View File

@@ -1,183 +0,0 @@
/*
* QEMU host memfd memory backend
*
* Copyright (C) 2018 Red Hat Inc
*
* Authors:
* Marc-André Lureau <marcandre.lureau@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "sysemu/hostmem.h"
#include "sysemu/sysemu.h"
#include "qom/object_interfaces.h"
#include "qemu/memfd.h"
#include "qapi/error.h"
#define TYPE_MEMORY_BACKEND_MEMFD "memory-backend-memfd"
#define MEMORY_BACKEND_MEMFD(obj) \
OBJECT_CHECK(HostMemoryBackendMemfd, (obj), TYPE_MEMORY_BACKEND_MEMFD)
typedef struct HostMemoryBackendMemfd HostMemoryBackendMemfd;
struct HostMemoryBackendMemfd {
HostMemoryBackend parent_obj;
bool hugetlb;
uint64_t hugetlbsize;
bool seal;
};
static void
memfd_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
{
HostMemoryBackendMemfd *m = MEMORY_BACKEND_MEMFD(backend);
char *name;
int fd;
if (!backend->size) {
error_setg(errp, "can't create backend with size 0");
return;
}
backend->force_prealloc = mem_prealloc;
fd = qemu_memfd_create(TYPE_MEMORY_BACKEND_MEMFD, backend->size,
m->hugetlb, m->hugetlbsize, m->seal ?
F_SEAL_GROW | F_SEAL_SHRINK | F_SEAL_SEAL : 0,
errp);
if (fd == -1) {
return;
}
name = host_memory_backend_get_name(backend);
memory_region_init_ram_from_fd(&backend->mr, OBJECT(backend),
name, backend->size,
backend->share, fd, errp);
g_free(name);
}
static bool
memfd_backend_get_hugetlb(Object *o, Error **errp)
{
return MEMORY_BACKEND_MEMFD(o)->hugetlb;
}
static void
memfd_backend_set_hugetlb(Object *o, bool value, Error **errp)
{
MEMORY_BACKEND_MEMFD(o)->hugetlb = value;
}
static void
memfd_backend_set_hugetlbsize(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
HostMemoryBackendMemfd *m = MEMORY_BACKEND_MEMFD(obj);
Error *local_err = NULL;
uint64_t value;
if (host_memory_backend_mr_inited(MEMORY_BACKEND(obj))) {
error_setg(&local_err, "cannot change property value");
goto out;
}
visit_type_size(v, name, &value, &local_err);
if (local_err) {
goto out;
}
if (!value) {
error_setg(&local_err, "Property '%s.%s' doesn't take value '%"
PRIu64 "'", object_get_typename(obj), name, value);
goto out;
}
m->hugetlbsize = value;
out:
error_propagate(errp, local_err);
}
static void
memfd_backend_get_hugetlbsize(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
HostMemoryBackendMemfd *m = MEMORY_BACKEND_MEMFD(obj);
uint64_t value = m->hugetlbsize;
visit_type_size(v, name, &value, errp);
}
static bool
memfd_backend_get_seal(Object *o, Error **errp)
{
return MEMORY_BACKEND_MEMFD(o)->seal;
}
static void
memfd_backend_set_seal(Object *o, bool value, Error **errp)
{
MEMORY_BACKEND_MEMFD(o)->seal = value;
}
static void
memfd_backend_instance_init(Object *obj)
{
HostMemoryBackendMemfd *m = MEMORY_BACKEND_MEMFD(obj);
/* default to sealed file */
m->seal = true;
MEMORY_BACKEND(m)->share = true;
}
static void
memfd_backend_class_init(ObjectClass *oc, void *data)
{
HostMemoryBackendClass *bc = MEMORY_BACKEND_CLASS(oc);
bc->alloc = memfd_backend_memory_alloc;
if (qemu_memfd_check(MFD_HUGETLB)) {
object_class_property_add_bool(oc, "hugetlb",
memfd_backend_get_hugetlb,
memfd_backend_set_hugetlb,
&error_abort);
object_class_property_set_description(oc, "hugetlb",
"Use huge pages",
&error_abort);
object_class_property_add(oc, "hugetlbsize", "int",
memfd_backend_get_hugetlbsize,
memfd_backend_set_hugetlbsize,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "hugetlbsize",
"Huge pages size (ex: 2M, 1G)",
&error_abort);
}
if (qemu_memfd_check(MFD_ALLOW_SEALING)) {
object_class_property_add_bool(oc, "seal",
memfd_backend_get_seal,
memfd_backend_set_seal,
&error_abort);
object_class_property_set_description(oc, "seal",
"Seal growing & shrinking",
&error_abort);
}
}
static const TypeInfo memfd_backend_info = {
.name = TYPE_MEMORY_BACKEND_MEMFD,
.parent = TYPE_MEMORY_BACKEND,
.instance_init = memfd_backend_instance_init,
.class_init = memfd_backend_class_init,
.instance_size = sizeof(HostMemoryBackendMemfd),
};
static void register_types(void)
{
if (qemu_memfd_check(0)) {
type_register_static(&memfd_backend_info);
}
}
type_init(register_types);

View File

@@ -9,27 +9,26 @@
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/hostmem.h"
#include "qapi/error.h"
#include "qom/object_interfaces.h"
#define TYPE_MEMORY_BACKEND_RAM "memory-backend-ram"
static void
ram_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
{
char *name;
char *path;
if (!backend->size) {
error_setg(errp, "can't create backend with size 0");
return;
}
name = host_memory_backend_get_name(backend);
memory_region_init_ram_shared_nomigrate(&backend->mr, OBJECT(backend), name,
backend->size, backend->share, errp);
g_free(name);
path = object_get_canonical_path_component(OBJECT(backend));
memory_region_init_ram(&backend->mr, OBJECT(backend), path,
backend->size, errp);
g_free(path);
}
static void

View File

@@ -9,16 +9,13 @@
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/hostmem.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "qapi/qapi-builtin-visit.h"
#include "qapi/visitor.h"
#include "qapi-types.h"
#include "qapi-visit.h"
#include "qemu/config-file.h"
#include "qom/object_interfaces.h"
#include "qemu/mmap-alloc.h"
#ifdef CONFIG_NUMA
#include <numaif.h>
@@ -28,48 +25,36 @@ QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_BIND != MPOL_BIND);
QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_INTERLEAVE != MPOL_INTERLEAVE);
#endif
char *
host_memory_backend_get_name(HostMemoryBackend *backend)
{
if (!backend->use_canonical_path) {
return object_get_canonical_path_component(OBJECT(backend));
}
return object_get_canonical_path(OBJECT(backend));
}
static void
host_memory_backend_get_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
host_memory_backend_get_size(Object *obj, Visitor *v, void *opaque,
const char *name, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint64_t value = backend->size;
visit_type_size(v, name, &value, errp);
visit_type_size(v, &value, name, errp);
}
static void
host_memory_backend_set_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
host_memory_backend_set_size(Object *obj, Visitor *v, void *opaque,
const char *name, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
Error *local_err = NULL;
uint64_t value;
if (host_memory_backend_mr_inited(backend)) {
error_setg(&local_err, "cannot change property %s of %s ",
name, object_get_typename(obj));
if (memory_region_size(&backend->mr)) {
error_setg(&local_err, "cannot change property value");
goto out;
}
visit_type_size(v, name, &value, &local_err);
visit_type_size(v, &value, name, &local_err);
if (local_err) {
goto out;
}
if (!value) {
error_setg(&local_err,
"property '%s' of %s doesn't take value '%" PRIu64 "'",
name, object_get_typename(obj), value);
error_setg(&local_err, "Property '%s.%s' doesn't take value '%"
PRIu64 "'", object_get_typename(obj), name, value);
goto out;
}
backend->size = value;
@@ -78,8 +63,8 @@ out:
}
static void
host_memory_backend_get_host_nodes(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
host_memory_backend_get_host_nodes(Object *obj, Visitor *v, void *opaque,
const char *name, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint16List *host_nodes = NULL;
@@ -106,32 +91,23 @@ host_memory_backend_get_host_nodes(Object *obj, Visitor *v, const char *name,
node = &(*node)->next;
} while (true);
visit_type_uint16List(v, name, &host_nodes, errp);
visit_type_uint16List(v, &host_nodes, name, errp);
}
static void
host_memory_backend_set_host_nodes(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
host_memory_backend_set_host_nodes(Object *obj, Visitor *v, void *opaque,
const char *name, Error **errp)
{
#ifdef CONFIG_NUMA
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint16List *l, *host_nodes = NULL;
uint16List *l = NULL;
visit_type_uint16List(v, name, &host_nodes, errp);
visit_type_uint16List(v, &l, name, errp);
for (l = host_nodes; l; l = l->next) {
if (l->value >= MAX_NODES) {
error_setg(errp, "Invalid host-nodes value: %d", l->value);
goto out;
}
}
for (l = host_nodes; l; l = l->next) {
while (l) {
bitmap_set(backend->host_nodes, l->value, 1);
l = l->next;
}
out:
qapi_free_uint16List(host_nodes);
#else
error_setg(errp, "NUMA node binding are not supported by this QEMU");
#endif
@@ -168,7 +144,7 @@ static void host_memory_backend_set_merge(Object *obj, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
if (!host_memory_backend_mr_inited(backend)) {
if (!memory_region_size(&backend->mr)) {
backend->merge = value;
return;
}
@@ -194,7 +170,7 @@ static void host_memory_backend_set_dump(Object *obj, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
if (!host_memory_backend_mr_inited(backend)) {
if (!memory_region_size(&backend->mr)) {
backend->dump = value;
return;
}
@@ -219,7 +195,6 @@ static bool host_memory_backend_get_prealloc(Object *obj, Error **errp)
static void host_memory_backend_set_prealloc(Object *obj, bool value,
Error **errp)
{
Error *local_err = NULL;
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
if (backend->force_prealloc) {
@@ -230,7 +205,7 @@ static void host_memory_backend_set_prealloc(Object *obj, bool value,
}
}
if (!host_memory_backend_mr_inited(backend)) {
if (!memory_region_size(&backend->mr)) {
backend->prealloc = value;
return;
}
@@ -240,11 +215,7 @@ static void host_memory_backend_set_prealloc(Object *obj, bool value,
void *ptr = memory_region_get_ram_ptr(&backend->mr);
uint64_t sz = memory_region_size(&backend->mr);
os_mem_prealloc(fd, ptr, sz, smp_cpus, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
os_mem_prealloc(fd, ptr, sz);
backend->prealloc = true;
}
}
@@ -257,54 +228,34 @@ static void host_memory_backend_init(Object *obj)
backend->merge = machine_mem_merge(machine);
backend->dump = machine_dump_guest_core(machine);
backend->prealloc = mem_prealloc;
object_property_add_bool(obj, "merge",
host_memory_backend_get_merge,
host_memory_backend_set_merge, NULL);
object_property_add_bool(obj, "dump",
host_memory_backend_get_dump,
host_memory_backend_set_dump, NULL);
object_property_add_bool(obj, "prealloc",
host_memory_backend_get_prealloc,
host_memory_backend_set_prealloc, NULL);
object_property_add(obj, "size", "int",
host_memory_backend_get_size,
host_memory_backend_set_size, NULL, NULL, NULL);
object_property_add(obj, "host-nodes", "int",
host_memory_backend_get_host_nodes,
host_memory_backend_set_host_nodes, NULL, NULL, NULL);
object_property_add_enum(obj, "policy", "HostMemPolicy",
HostMemPolicy_lookup,
host_memory_backend_get_policy,
host_memory_backend_set_policy, NULL);
}
static void host_memory_backend_post_init(Object *obj)
MemoryRegion *
host_memory_backend_get_memory(HostMemoryBackend *backend, Error **errp)
{
object_apply_compat_props(obj);
return memory_region_size(&backend->mr) ? &backend->mr : NULL;
}
bool host_memory_backend_mr_inited(HostMemoryBackend *backend)
{
/*
* NOTE: We forbid zero-length memory backend, so here zero means
* "we haven't inited the backend memory region yet".
*/
return memory_region_size(&backend->mr) != 0;
}
MemoryRegion *host_memory_backend_get_memory(HostMemoryBackend *backend)
{
return host_memory_backend_mr_inited(backend) ? &backend->mr : NULL;
}
void host_memory_backend_set_mapped(HostMemoryBackend *backend, bool mapped)
{
backend->is_mapped = mapped;
}
bool host_memory_backend_is_mapped(HostMemoryBackend *backend)
{
return backend->is_mapped;
}
#ifdef __linux__
size_t host_memory_backend_pagesize(HostMemoryBackend *memdev)
{
Object *obj = OBJECT(memdev);
char *path = object_property_get_str(obj, "mem-path", NULL);
size_t pagesize = qemu_mempath_getpagesize(path);
g_free(path);
return pagesize;
}
#else
size_t host_memory_backend_pagesize(HostMemoryBackend *memdev)
{
return getpagesize();
}
#endif
static void
host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
{
@@ -317,7 +268,8 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
if (bc->alloc) {
bc->alloc(backend, &local_err);
if (local_err) {
goto out;
error_propagate(errp, local_err);
return;
}
ptr = memory_region_get_ram_ptr(&backend->mr);
@@ -347,7 +299,7 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
return;
} else if (maxnode == 0 && backend->policy != MPOL_DEFAULT) {
error_setg(errp, "host-nodes must be set for policy %s",
HostMemPolicy_str(backend->policy));
HostMemPolicy_lookup[backend->policy]);
return;
}
@@ -361,11 +313,9 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
assert(maxnode <= MAX_NODES);
if (mbind(ptr, sz, backend->policy,
maxnode ? backend->host_nodes : NULL, maxnode + 1, flags)) {
if (backend->policy != MPOL_DEFAULT || errno != ENOSYS) {
error_setg_errno(errp, errno,
"cannot bind memory to host NUMA nodes");
return;
}
error_setg_errno(errp, errno,
"cannot bind memory to host NUMA nodes");
return;
}
#endif
/* Preallocate memory after the NUMA policy has been instantiated.
@@ -373,62 +323,24 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
* specified NUMA policy in place.
*/
if (backend->prealloc) {
os_mem_prealloc(memory_region_get_fd(&backend->mr), ptr, sz,
smp_cpus, &local_err);
if (local_err) {
goto out;
}
os_mem_prealloc(memory_region_get_fd(&backend->mr), ptr, sz);
}
}
out:
error_propagate(errp, local_err);
}
static bool
host_memory_backend_can_be_deleted(UserCreatable *uc)
host_memory_backend_can_be_deleted(UserCreatable *uc, Error **errp)
{
if (host_memory_backend_is_mapped(MEMORY_BACKEND(uc))) {
MemoryRegion *mr;
mr = host_memory_backend_get_memory(MEMORY_BACKEND(uc), errp);
if (memory_region_is_mapped(mr)) {
return false;
} else {
return true;
}
}
static bool host_memory_backend_get_share(Object *o, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
return backend->share;
}
static void host_memory_backend_set_share(Object *o, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property value");
return;
}
backend->share = value;
}
static bool
host_memory_backend_get_use_canonical_path(Object *obj, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
return backend->use_canonical_path;
}
static void
host_memory_backend_set_use_canonical_path(Object *obj, bool value,
Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
backend->use_canonical_path = value;
}
static void
host_memory_backend_class_init(ObjectClass *oc, void *data)
{
@@ -436,48 +348,6 @@ host_memory_backend_class_init(ObjectClass *oc, void *data)
ucc->complete = host_memory_backend_memory_complete;
ucc->can_be_deleted = host_memory_backend_can_be_deleted;
object_class_property_add_bool(oc, "merge",
host_memory_backend_get_merge,
host_memory_backend_set_merge, &error_abort);
object_class_property_set_description(oc, "merge",
"Mark memory as mergeable", &error_abort);
object_class_property_add_bool(oc, "dump",
host_memory_backend_get_dump,
host_memory_backend_set_dump, &error_abort);
object_class_property_set_description(oc, "dump",
"Set to 'off' to exclude from core dump", &error_abort);
object_class_property_add_bool(oc, "prealloc",
host_memory_backend_get_prealloc,
host_memory_backend_set_prealloc, &error_abort);
object_class_property_set_description(oc, "prealloc",
"Preallocate memory", &error_abort);
object_class_property_add(oc, "size", "int",
host_memory_backend_get_size,
host_memory_backend_set_size,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "size",
"Size of the memory region (ex: 500M)", &error_abort);
object_class_property_add(oc, "host-nodes", "int",
host_memory_backend_get_host_nodes,
host_memory_backend_set_host_nodes,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "host-nodes",
"Binds memory to the list of NUMA host nodes", &error_abort);
object_class_property_add_enum(oc, "policy", "HostMemPolicy",
&HostMemPolicy_lookup,
host_memory_backend_get_policy,
host_memory_backend_set_policy, &error_abort);
object_class_property_set_description(oc, "policy",
"Set the NUMA policy", &error_abort);
object_class_property_add_bool(oc, "share",
host_memory_backend_get_share, host_memory_backend_set_share,
&error_abort);
object_class_property_set_description(oc, "share",
"Mark the memory as private to QEMU or shared", &error_abort);
object_class_property_add_bool(oc, "x-use-canonical-path-for-ramblock-id",
host_memory_backend_get_use_canonical_path,
host_memory_backend_set_use_canonical_path, &error_abort);
}
static const TypeInfo host_memory_backend_info = {
@@ -488,7 +358,6 @@ static const TypeInfo host_memory_backend_info = {
.class_init = host_memory_backend_class_init,
.instance_size = sizeof(HostMemoryBackend),
.instance_init = host_memory_backend_init,
.instance_post_init = host_memory_backend_post_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }

85
backends/msmouse.c Normal file
View File

@@ -0,0 +1,85 @@
/*
* QEMU Microsoft serial mouse emulation
*
* Copyright (c) 2008 Lubomir Rintel
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdlib.h>
#include "qemu-common.h"
#include "sysemu/char.h"
#include "ui/console.h"
#define MSMOUSE_LO6(n) ((n) & 0x3f)
#define MSMOUSE_HI2(n) (((n) & 0xc0) >> 6)
static void msmouse_event(void *opaque,
int dx, int dy, int dz, int buttons_state)
{
CharDriverState *chr = (CharDriverState *)opaque;
unsigned char bytes[4] = { 0x40, 0x00, 0x00, 0x00 };
/* Movement deltas */
bytes[0] |= (MSMOUSE_HI2(dy) << 2) | MSMOUSE_HI2(dx);
bytes[1] |= MSMOUSE_LO6(dx);
bytes[2] |= MSMOUSE_LO6(dy);
/* Buttons */
bytes[0] |= (buttons_state & 0x01 ? 0x20 : 0x00);
bytes[0] |= (buttons_state & 0x02 ? 0x10 : 0x00);
bytes[3] |= (buttons_state & 0x04 ? 0x20 : 0x00);
/* We always send the packet of, so that we do not have to keep track
of previous state of the middle button. This can potentially confuse
some very old drivers for two button mice though. */
qemu_chr_be_write(chr, bytes, 4);
}
static int msmouse_chr_write (struct CharDriverState *s, const uint8_t *buf, int len)
{
/* Ignore writes to mouse port */
return len;
}
static void msmouse_chr_close (struct CharDriverState *chr)
{
g_free (chr);
}
CharDriverState *qemu_chr_open_msmouse(void)
{
CharDriverState *chr;
chr = qemu_chr_alloc();
chr->chr_write = msmouse_chr_write;
chr->chr_close = msmouse_chr_close;
chr->explicit_be_open = true;
qemu_add_mouse_event_handler(msmouse_event, chr, 0, "QEMU Microsoft Mouse");
return chr;
}
static void register_types(void)
{
register_char_driver("msmouse", CHARDEV_BACKEND_KIND_MSMOUSE, NULL);
}
type_init(register_types);

View File

@@ -10,11 +10,10 @@
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/rng.h"
#include "chardev/char-fe.h"
#include "qapi/error.h"
#include "sysemu/char.h"
#include "qapi/qmp/qerror.h"
#include "hw/qdev.h" /* just for DEFINE_PROP_CHR */
#define TYPE_RNG_EGD "rng-egd"
#define RNG_EGD(obj) OBJECT_CHECK(RngEgd, (obj), TYPE_RNG_EGD)
@@ -23,14 +22,35 @@ typedef struct RngEgd
{
RngBackend parent;
CharBackend chr;
CharDriverState *chr;
char *chr_name;
GSList *requests;
} RngEgd;
static void rng_egd_request_entropy(RngBackend *b, RngRequest *req)
typedef struct RngRequest
{
EntropyReceiveFunc *receive_entropy;
uint8_t *data;
void *opaque;
size_t offset;
size_t size;
} RngRequest;
static void rng_egd_request_entropy(RngBackend *b, size_t size,
EntropyReceiveFunc *receive_entropy,
void *opaque)
{
RngEgd *s = RNG_EGD(b);
size_t size = req->size;
RngRequest *req;
req = g_malloc(sizeof(*req));
req->offset = 0;
req->size = size;
req->receive_entropy = receive_entropy;
req->opaque = opaque;
req->data = g_malloc(req->size);
while (size > 0) {
uint8_t header[2];
@@ -40,21 +60,28 @@ static void rng_egd_request_entropy(RngBackend *b, RngRequest *req)
header[0] = 0x02;
header[1] = len;
/* XXX this blocks entire thread. Rewrite to use
* qemu_chr_fe_write and background I/O callbacks */
qemu_chr_fe_write_all(&s->chr, header, sizeof(header));
qemu_chr_fe_write(s->chr, header, sizeof(header));
size -= len;
}
s->requests = g_slist_append(s->requests, req);
}
static void rng_egd_free_request(RngRequest *req)
{
g_free(req->data);
g_free(req);
}
static int rng_egd_chr_can_read(void *opaque)
{
RngEgd *s = RNG_EGD(opaque);
RngRequest *req;
GSList *i;
int size = 0;
QSIMPLEQ_FOREACH(req, &s->parent.requests, next) {
for (i = s->requests; i; i = i->next) {
RngRequest *req = i->data;
size += req->size - req->offset;
}
@@ -66,8 +93,8 @@ static void rng_egd_chr_read(void *opaque, const uint8_t *buf, int size)
RngEgd *s = RNG_EGD(opaque);
size_t buf_offset = 0;
while (size > 0 && !QSIMPLEQ_EMPTY(&s->parent.requests)) {
RngRequest *req = QSIMPLEQ_FIRST(&s->parent.requests);
while (size > 0 && s->requests) {
RngRequest *req = s->requests->data;
int len = MIN(size, req->size - req->offset);
memcpy(req->data + req->offset, buf + buf_offset, len);
@@ -76,17 +103,41 @@ static void rng_egd_chr_read(void *opaque, const uint8_t *buf, int size)
size -= len;
if (req->offset == req->size) {
s->requests = g_slist_remove_link(s->requests, s->requests);
req->receive_entropy(req->opaque, req->data, req->size);
rng_backend_finalize_request(&s->parent, req);
rng_egd_free_request(req);
}
}
}
static void rng_egd_free_requests(RngEgd *s)
{
GSList *i;
for (i = s->requests; i; i = i->next) {
rng_egd_free_request(i->data);
}
g_slist_free(s->requests);
s->requests = NULL;
}
static void rng_egd_cancel_requests(RngBackend *b)
{
RngEgd *s = RNG_EGD(b);
/* We simply delete the list of pending requests. If there is data in the
* queue waiting to be read, this is okay, because there will always be
* more data than we requested originally
*/
rng_egd_free_requests(s);
}
static void rng_egd_opened(RngBackend *b, Error **errp)
{
RngEgd *s = RNG_EGD(b);
Chardev *chr;
if (s->chr_name == NULL) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
@@ -94,19 +145,21 @@ static void rng_egd_opened(RngBackend *b, Error **errp)
return;
}
chr = qemu_chr_find(s->chr_name);
if (chr == NULL) {
s->chr = qemu_chr_find(s->chr_name);
if (s->chr == NULL) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", s->chr_name);
return;
}
if (!qemu_chr_fe_init(&s->chr, chr, errp)) {
if (qemu_chr_fe_claim(s->chr) != 0) {
error_setg(errp, QERR_DEVICE_IN_USE, s->chr_name);
return;
}
/* FIXME we should resubmit pending requests when the CDS reconnects. */
qemu_chr_fe_set_handlers(&s->chr, rng_egd_chr_can_read,
rng_egd_chr_read, NULL, NULL, s, NULL, true);
qemu_chr_add_handlers(s->chr, rng_egd_chr_can_read, rng_egd_chr_read,
NULL, s);
}
static void rng_egd_set_chardev(Object *obj, const char *value, Error **errp)
@@ -125,10 +178,9 @@ static void rng_egd_set_chardev(Object *obj, const char *value, Error **errp)
static char *rng_egd_get_chardev(Object *obj, Error **errp)
{
RngEgd *s = RNG_EGD(obj);
Chardev *chr = qemu_chr_fe_get_driver(&s->chr);
if (chr && chr->label) {
return g_strdup(chr->label);
if (s->chr && s->chr->label) {
return g_strdup(s->chr->label);
}
return NULL;
@@ -145,8 +197,14 @@ static void rng_egd_finalize(Object *obj)
{
RngEgd *s = RNG_EGD(obj);
qemu_chr_fe_deinit(&s->chr, false);
if (s->chr) {
qemu_chr_add_handlers(s->chr, NULL, NULL, NULL, NULL);
qemu_chr_fe_release(s->chr);
}
g_free(s->chr_name);
rng_egd_free_requests(s);
}
static void rng_egd_class_init(ObjectClass *klass, void *data)
@@ -154,6 +212,7 @@ static void rng_egd_class_init(ObjectClass *klass, void *data)
RngBackendClass *rbc = RNG_BACKEND_CLASS(klass);
rbc->request_entropy = rng_egd_request_entropy;
rbc->cancel_requests = rng_egd_cancel_requests;
rbc->opened = rng_egd_opened;
}

View File

@@ -10,19 +10,21 @@
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/rng-random.h"
#include "sysemu/rng.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/main-loop.h"
struct RngRandom
struct RndRandom
{
RngBackend parent;
int fd;
char *filename;
EntropyReceiveFunc *receive_func;
void *opaque;
size_t size;
};
/**
@@ -34,41 +36,42 @@ struct RngRandom
static void entropy_available(void *opaque)
{
RngRandom *s = RNG_RANDOM(opaque);
RndRandom *s = RNG_RANDOM(opaque);
uint8_t buffer[s->size];
ssize_t len;
while (!QSIMPLEQ_EMPTY(&s->parent.requests)) {
RngRequest *req = QSIMPLEQ_FIRST(&s->parent.requests);
ssize_t len;
len = read(s->fd, req->data, req->size);
if (len < 0 && errno == EAGAIN) {
return;
}
g_assert(len != -1);
req->receive_entropy(req->opaque, req->data, len);
rng_backend_finalize_request(&s->parent, req);
len = read(s->fd, buffer, s->size);
if (len < 0 && errno == EAGAIN) {
return;
}
g_assert(len != -1);
s->receive_func(s->opaque, buffer, len);
s->receive_func = NULL;
/* We've drained all requests, the fd handler can be reset. */
qemu_set_fd_handler(s->fd, NULL, NULL, NULL);
}
static void rng_random_request_entropy(RngBackend *b, RngRequest *req)
static void rng_random_request_entropy(RngBackend *b, size_t size,
EntropyReceiveFunc *receive_entropy,
void *opaque)
{
RngRandom *s = RNG_RANDOM(b);
RndRandom *s = RNG_RANDOM(b);
if (QSIMPLEQ_EMPTY(&s->parent.requests)) {
/* If there are no pending requests yet, we need to
* install our fd handler. */
qemu_set_fd_handler(s->fd, entropy_available, NULL, s);
if (s->receive_func) {
s->receive_func(s->opaque, NULL, 0);
}
s->receive_func = receive_entropy;
s->opaque = opaque;
s->size = size;
qemu_set_fd_handler(s->fd, entropy_available, NULL, s);
}
static void rng_random_opened(RngBackend *b, Error **errp)
{
RngRandom *s = RNG_RANDOM(b);
RndRandom *s = RNG_RANDOM(b);
if (s->filename == NULL) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
@@ -83,7 +86,7 @@ static void rng_random_opened(RngBackend *b, Error **errp)
static char *rng_random_get_filename(Object *obj, Error **errp)
{
RngRandom *s = RNG_RANDOM(obj);
RndRandom *s = RNG_RANDOM(obj);
return g_strdup(s->filename);
}
@@ -92,7 +95,7 @@ static void rng_random_set_filename(Object *obj, const char *filename,
Error **errp)
{
RngBackend *b = RNG_BACKEND(obj);
RngRandom *s = RNG_RANDOM(obj);
RndRandom *s = RNG_RANDOM(obj);
if (b->opened) {
error_setg(errp, QERR_PERMISSION_DENIED);
@@ -105,7 +108,7 @@ static void rng_random_set_filename(Object *obj, const char *filename,
static void rng_random_init(Object *obj)
{
RngRandom *s = RNG_RANDOM(obj);
RndRandom *s = RNG_RANDOM(obj);
object_property_add_str(obj, "filename",
rng_random_get_filename,
@@ -118,7 +121,7 @@ static void rng_random_init(Object *obj)
static void rng_random_finalize(Object *obj)
{
RngRandom *s = RNG_RANDOM(obj);
RndRandom *s = RNG_RANDOM(obj);
if (s->fd != -1) {
qemu_set_fd_handler(s->fd, NULL, NULL, NULL);
@@ -139,7 +142,7 @@ static void rng_random_class_init(ObjectClass *klass, void *data)
static const TypeInfo rng_random_info = {
.name = TYPE_RNG_RANDOM,
.parent = TYPE_RNG_BACKEND,
.instance_size = sizeof(RngRandom),
.instance_size = sizeof(RndRandom),
.class_init = rng_random_class_init,
.instance_init = rng_random_init,
.instance_finalize = rng_random_finalize,

View File

@@ -10,9 +10,7 @@
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/rng.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qom/object_interfaces.h"
@@ -21,20 +19,18 @@ void rng_backend_request_entropy(RngBackend *s, size_t size,
void *opaque)
{
RngBackendClass *k = RNG_BACKEND_GET_CLASS(s);
RngRequest *req;
if (k->request_entropy) {
req = g_malloc(sizeof(*req));
k->request_entropy(s, size, receive_entropy, opaque);
}
}
req->offset = 0;
req->size = size;
req->receive_entropy = receive_entropy;
req->opaque = opaque;
req->data = g_malloc(req->size);
void rng_backend_cancel_requests(RngBackend *s)
{
RngBackendClass *k = RNG_BACKEND_GET_CLASS(s);
k->request_entropy(s, req);
QSIMPLEQ_INSERT_TAIL(&s->requests, req, next);
if (k->cancel_requests) {
k->cancel_requests(s);
}
}
@@ -76,48 +72,14 @@ static void rng_backend_prop_set_opened(Object *obj, bool value, Error **errp)
s->opened = true;
}
static void rng_backend_free_request(RngRequest *req)
{
g_free(req->data);
g_free(req);
}
static void rng_backend_free_requests(RngBackend *s)
{
RngRequest *req, *next;
QSIMPLEQ_FOREACH_SAFE(req, &s->requests, next, next) {
rng_backend_free_request(req);
}
QSIMPLEQ_INIT(&s->requests);
}
void rng_backend_finalize_request(RngBackend *s, RngRequest *req)
{
QSIMPLEQ_REMOVE(&s->requests, req, RngRequest, next);
rng_backend_free_request(req);
}
static void rng_backend_init(Object *obj)
{
RngBackend *s = RNG_BACKEND(obj);
QSIMPLEQ_INIT(&s->requests);
object_property_add_bool(obj, "opened",
rng_backend_prop_get_opened,
rng_backend_prop_set_opened,
NULL);
}
static void rng_backend_finalize(Object *obj)
{
RngBackend *s = RNG_BACKEND(obj);
rng_backend_free_requests(s);
}
static void rng_backend_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
@@ -130,7 +92,6 @@ static const TypeInfo rng_backend_info = {
.parent = TYPE_OBJECT,
.instance_size = sizeof(RngBackend),
.instance_init = rng_backend_init,
.instance_finalize = rng_backend_finalize,
.class_size = sizeof(RngBackendClass),
.class_init = rng_backend_class_init,
.abstract = true,

View File

@@ -23,25 +23,19 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "chardev/char.h"
#include "sysemu/char.h"
#define BUF_SIZE 32
typedef struct {
Chardev parent;
CharDriverState *chr;
uint8_t in_buf[32];
int in_buf_used;
} TestdevChardev;
#define TYPE_CHARDEV_TESTDEV "chardev-testdev"
#define TESTDEV_CHARDEV(obj) \
OBJECT_CHECK(TestdevChardev, (obj), TYPE_CHARDEV_TESTDEV)
} TestdevCharState;
/* Try to interpret a whole incoming packet */
static int testdev_eat_packet(TestdevChardev *testdev)
static int testdev_eat_packet(TestdevCharState *testdev)
{
const uint8_t *cur = testdev->in_buf;
int len = testdev->in_buf_used;
@@ -82,9 +76,9 @@ static int testdev_eat_packet(TestdevChardev *testdev)
}
/* The other end is writing some data. Store it and try to interpret */
static int testdev_chr_write(Chardev *chr, const uint8_t *buf, int len)
static int testdev_write(CharDriverState *chr, const uint8_t *buf, int len)
{
TestdevChardev *testdev = TESTDEV_CHARDEV(chr);
TestdevCharState *testdev = chr->opaque;
int tocopy, eaten, orig_len = len;
while (len) {
@@ -107,23 +101,31 @@ static int testdev_chr_write(Chardev *chr, const uint8_t *buf, int len)
return orig_len;
}
static void char_testdev_class_init(ObjectClass *oc, void *data)
static void testdev_close(struct CharDriverState *chr)
{
ChardevClass *cc = CHARDEV_CLASS(oc);
TestdevCharState *testdev = chr->opaque;
cc->chr_write = testdev_chr_write;
g_free(testdev);
}
static const TypeInfo char_testdev_type_info = {
.name = TYPE_CHARDEV_TESTDEV,
.parent = TYPE_CHARDEV,
.instance_size = sizeof(TestdevChardev),
.class_init = char_testdev_class_init,
};
CharDriverState *chr_testdev_init(void)
{
TestdevCharState *testdev;
CharDriverState *chr;
testdev = g_malloc0(sizeof(TestdevCharState));
testdev->chr = chr = g_malloc0(sizeof(CharDriverState));
chr->opaque = testdev;
chr->chr_write = testdev_write;
chr->chr_close = testdev_close;
return chr;
}
static void register_types(void)
{
type_register_static(&char_testdev_type_info);
register_char_driver("testdev", CHARDEV_BACKEND_KIND_TESTDEV, NULL);
}
type_init(register_types);

View File

@@ -12,196 +12,185 @@
* Based on backends/rng.c by Anthony Liguori
*/
#include "qemu/osdep.h"
#include "sysemu/tpm_backend.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "sysemu/tpm.h"
#include "qemu/thread.h"
#include "qemu/main-loop.h"
#include "block/thread-pool.h"
#include "qemu/error-report.h"
static void tpm_backend_request_completed(void *opaque, int ret)
{
TPMBackend *s = TPM_BACKEND(opaque);
TPMIfClass *tic = TPM_IF_GET_CLASS(s->tpmif);
tic->request_completed(s->tpmif, ret);
/* no need for atomic, as long the BQL is taken */
s->cmd = NULL;
object_unref(OBJECT(s));
}
static int tpm_backend_worker_thread(gpointer data)
{
TPMBackend *s = TPM_BACKEND(data);
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
Error *err = NULL;
k->handle_request(s, s->cmd, &err);
if (err) {
error_report_err(err);
return -1;
}
return 0;
}
void tpm_backend_finish_sync(TPMBackend *s)
{
while (s->cmd) {
aio_poll(qemu_get_aio_context(), true);
}
}
#include "sysemu/tpm_backend_int.h"
enum TpmType tpm_backend_get_type(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->type;
return k->ops->type;
}
int tpm_backend_init(TPMBackend *s, TPMIf *tpmif, Error **errp)
const char *tpm_backend_get_desc(TPMBackend *s)
{
if (s->tpmif) {
error_setg(errp, "TPM backend '%s' is already initialized", s->id);
return -1;
}
s->tpmif = tpmif;
object_ref(OBJECT(tpmif));
s->had_startup_error = false;
return 0;
}
int tpm_backend_startup_tpm(TPMBackend *s, size_t buffersize)
{
int res = 0;
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
/* terminate a running TPM */
tpm_backend_finish_sync(s);
return k->ops->desc();
}
res = k->startup_tpm ? k->startup_tpm(s, buffersize) : 0;
void tpm_backend_destroy(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
s->had_startup_error = (res != 0);
k->ops->destroy(s);
}
return res;
int tpm_backend_init(TPMBackend *s, TPMState *state,
TPMRecvDataCB *datacb)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->ops->init(s, state, datacb);
}
int tpm_backend_startup_tpm(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->ops->startup_tpm(s);
}
bool tpm_backend_had_startup_error(TPMBackend *s)
{
return s->had_startup_error;
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->ops->had_startup_error(s);
}
void tpm_backend_deliver_request(TPMBackend *s, TPMBackendCmd *cmd)
size_t tpm_backend_realloc_buffer(TPMBackend *s, TPMSizedBuffer *sb)
{
ThreadPool *pool = aio_get_thread_pool(qemu_get_aio_context());
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
if (s->cmd != NULL) {
error_report("There is a TPM request pending");
return;
}
return k->ops->realloc_buffer(sb);
}
s->cmd = cmd;
object_ref(OBJECT(s));
thread_pool_submit_aio(pool, tpm_backend_worker_thread, s,
tpm_backend_request_completed, s);
void tpm_backend_deliver_request(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
k->ops->deliver_request(s);
}
void tpm_backend_reset(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
if (k->reset) {
k->reset(s);
}
tpm_backend_finish_sync(s);
s->had_startup_error = false;
k->ops->reset(s);
}
void tpm_backend_cancel_cmd(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
k->cancel_cmd(s);
k->ops->cancel_cmd(s);
}
bool tpm_backend_get_tpm_established_flag(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->get_tpm_established_flag ?
k->get_tpm_established_flag(s) : false;
return k->ops->get_tpm_established_flag(s);
}
int tpm_backend_reset_tpm_established_flag(TPMBackend *s, uint8_t locty)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->reset_tpm_established_flag ?
k->reset_tpm_established_flag(s, locty) : 0;
return k->ops->reset_tpm_established_flag(s, locty);
}
TPMVersion tpm_backend_get_tpm_version(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->get_tpm_version(s);
return k->ops->get_tpm_version(s);
}
size_t tpm_backend_get_buffer_size(TPMBackend *s)
{
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
return k->get_buffer_size(s);
}
TPMInfo *tpm_backend_query_tpm(TPMBackend *s)
{
TPMInfo *info = g_new0(TPMInfo, 1);
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
TPMIfClass *tic = TPM_IF_GET_CLASS(s->tpmif);
info->id = g_strdup(s->id);
info->model = tic->model;
info->options = k->get_tpm_options(s);
return info;
}
static void tpm_backend_instance_finalize(Object *obj)
static bool tpm_backend_prop_get_opened(Object *obj, Error **errp)
{
TPMBackend *s = TPM_BACKEND(obj);
object_unref(OBJECT(s->tpmif));
g_free(s->id);
return s->opened;
}
void tpm_backend_open(TPMBackend *s, Error **errp)
{
object_property_set_bool(OBJECT(s), true, "opened", errp);
}
static void tpm_backend_prop_set_opened(Object *obj, bool value, Error **errp)
{
TPMBackend *s = TPM_BACKEND(obj);
TPMBackendClass *k = TPM_BACKEND_GET_CLASS(s);
Error *local_err = NULL;
if (value == s->opened) {
return;
}
if (!value && s->opened) {
error_setg(errp, QERR_PERMISSION_DENIED);
return;
}
if (k->opened) {
k->opened(s, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
}
s->opened = true;
}
static void tpm_backend_instance_init(Object *obj)
{
object_property_add_bool(obj, "opened",
tpm_backend_prop_get_opened,
tpm_backend_prop_set_opened,
NULL);
}
void tpm_backend_thread_deliver_request(TPMBackendThread *tbt)
{
g_thread_pool_push(tbt->pool, (gpointer)TPM_BACKEND_CMD_PROCESS_CMD, NULL);
}
void tpm_backend_thread_create(TPMBackendThread *tbt,
GFunc func, gpointer user_data)
{
if (!tbt->pool) {
tbt->pool = g_thread_pool_new(func, user_data, 1, TRUE, NULL);
g_thread_pool_push(tbt->pool, (gpointer)TPM_BACKEND_CMD_INIT, NULL);
}
}
void tpm_backend_thread_end(TPMBackendThread *tbt)
{
if (tbt->pool) {
g_thread_pool_push(tbt->pool, (gpointer)TPM_BACKEND_CMD_END, NULL);
g_thread_pool_free(tbt->pool, FALSE, TRUE);
tbt->pool = NULL;
}
}
static const TypeInfo tpm_backend_info = {
.name = TYPE_TPM_BACKEND,
.parent = TYPE_OBJECT,
.instance_size = sizeof(TPMBackend),
.instance_finalize = tpm_backend_instance_finalize,
.instance_init = tpm_backend_instance_init,
.class_size = sizeof(TPMBackendClass),
.abstract = true,
};
static const TypeInfo tpm_if_info = {
.name = TYPE_TPM_IF,
.parent = TYPE_INTERFACE,
.class_size = sizeof(TPMIfClass),
};
static void register_types(void)
{
type_register_static(&tpm_backend_info);
type_register_static(&tpm_if_info);
}
type_init(register_types);

View File

@@ -24,37 +24,18 @@
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/atomic.h"
#include "exec/cpu-common.h"
#include "sysemu/kvm.h"
#include "sysemu/balloon.h"
#include "trace-root.h"
#include "qapi/error.h"
#include "qapi/qapi-commands-misc.h"
#include "trace.h"
#include "qmp-commands.h"
#include "qapi/qmp/qerror.h"
#include "qapi/qmp/qjson.h"
static QEMUBalloonEvent *balloon_event_fn;
static QEMUBalloonStatus *balloon_stat_fn;
static void *balloon_opaque;
static int balloon_inhibit_count;
bool qemu_balloon_is_inhibited(void)
{
return atomic_read(&balloon_inhibit_count) > 0;
}
void qemu_balloon_inhibit(bool state)
{
if (state) {
atomic_inc(&balloon_inhibit_count);
} else {
atomic_dec(&balloon_inhibit_count);
}
assert(atomic_read(&balloon_inhibit_count) >= 0);
}
static bool have_balloon(Error **errp)
{

Some files were not shown because too many files have changed in this diff Show More