Update for 0.12.4 release

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Changelog

@@ -1,3 +1,177 @@
+version 0.12.4
+ - Workaround for broken OSS_GETVERSION on FreeBSD, part two (Juergen Lock)
+ - oss: fix fragment setting (malc)
+ - oss: issue OSS_GETVERSION ioctl only when needed (malc)
+ - oss: refactor code around policy setting (malc)
+ - oss: workaround for cases when OSS_GETVERSION is not defined (malc)
+ - block: Free iovec arrays allocated by multiwrite_merge() (Stefan Hajnoczi)
+ - lsi: fix segfault in lsi_command_complete (Gerd Hoffmann)
+ - lsi: pass lsi_request to lsi_reselect (Gerd Hoffmann)
+ - lsi: move dma_len+dma_buf into lsi_request (Gerd Hoffmann)
+ - lsi: move current_dev into lsi_request (Gerd Hoffmann)
+ - lsi: have lsi_request for the whole life time of the request. (Gerd Hoffmann)
+ - lsi: use QTAILQ for lsi_queue (Gerd Hoffmann)
+ - tcp/mips: Change TCG_AREG0 (fp -> s0) (Stefan Weil)
+ - sh_pci: fix memory and I/O access (Aurelien Jarno)
+ - Fix incoming migration with iothread (Marcelo Tosatti)
+ - Fix SIGFPE for vnc display of width/height = 1 (Chris Webb)
+ - net: remove broken net_set_boot_mask() boot device validation (Eduardo Habkost)
+ - qcow2: Remove request from in-flight list after error (Kevin Wolf)
+ - qcow2: Don't ignore immediate read/write failures (Kevin Wolf)
+ - block: Fix multiwrite memory leak in error case (Kevin Wolf)
+ - block: Fix error code in multiwrite for immediate failures (Kevin Wolf)
+ - block: Fix multiwrite error handling (Kevin Wolf)
+ - scsi-disk: fix buffer overflow (Gerd Hoffmann)
+ - qcow2: Rewrite alloc_refcount_block/grow_refcount_table (Kevin Wolf)
+ - qcow2: Factor next_refcount_table_size out (Kevin Wolf)
+ - block: avoid creating too large iovecs in multiwrite_merge (Christoph Hellwig)
+ - json-parser: Fix segfault on malformed input (Kevin Wolf)
+ - linux-user: switch default ppc64 CPU to 970fx from 970 (Aurelien Jarno)
+ - target-sh4: MMU: fix store queue addresses (Aurelien Jarno)
+ - target-sh4: MMU: fix ITLB priviledge check (Aurelien Jarno)
+ - target-sh4: MMU: fix mem_idx computation (Aurelien Jarno)
+ - sh7750: handle MMUCR TI bit (Aurelien Jarno)
+ - UHCI spurious interrut fix (Paul Brook)
+ - tcg/mips: fix branch offset during retranslation (Aurelien Jarno)
+ - tcg/arm: correctly save/restore registers in prologue/epilogue (Aurelien Jarno)
+ - workaround for cmd646 bmdma register access while no dma is active (Igor V. Kovalenko)
+ - Fix corner case in chardev udp: parameter (Jan Kiszka)
+ - Don't set default monitor when there is a mux'ed one (Jan Kiszka)
+ - spelling typo (compatibilty) in hw/fw_cfg.c (Vagrant Cascadian)
+ - fdc: fix drive property handling. (Gerd Hoffmann)
+ - target-i386: fix commit c22549204a6edc431e8e4358e61bd56386ff6957 (TeLeMan)
+ - target-i386: fix SIB decoding with index = 4 (Aurelien Jarno)
+ - Fix segfault with ram_size > 4095M without kvm (Ryan Harper)
+ - target-i386: Fix long jumps/calls in long mode with REX.W set (malc)
+ - target-i386: fix lddqu SSE instruction (Aurelien Jarno)
+ - qemu-char.c: drop debug printfs from qemu_chr_parse_compat (Jan Kiszka)
+ - fix undefined shifts by >32 (Paolo Bonzini)
+ - Fix qemu -net user,hostfwd= example (Aurelien Jarno)
+
+version 0.12.3
+  - kvm: Fix eflags corruption in kvm mode (Jan Kiszka)
+  - qcow2: Fix access after end of array (Kevin Wolf)
+  - ide save/restore pio/atapi cmd transfer fields and io buffer (Marcelo Tosatti)
+  - net: Monitor command set_link finds only VLAN clients, fix (Markus Armbruster)
+  - net: info network shows only VLAN clients, fix (Markus Armbruster)
+  - net: net_check_clients() checks only VLAN clients, fix (Markus Armbruster)
+  - net: Fix bogus "Warning: vlan 0 with no nics" with -device (Markus Armbruster)
+  - net: net_check_clients() runs too early to see -device, fix (Markus Armbruster)
+  - net: Remove unused net_client_uninit() (Markus Armbruster)
+  - don't dereference NULL after failed strdup (Jim Meyering)
+  - virtio-net: fix network stall under load (Tom Lendacky)
+  - json: fix PRId64 on Win32 (Roy Tam)
+  - fix inet_parse typo (Marcelo Tosatti)
+  - iothread: fix vcpu stop with smp tcg (Marcelo Tosatti)
+  - segfault due to buffer overrun in usb-serial (David S. Ahern)
+  - qcow2: Fix signedness bugs (Kevin Wolf)
+  - Do not ignore error, if open file failed (-serial /dev/tty) (Evgeniy Dushistov)
+  - pc-bios: update to newer version of (stable) seabios (Anthony Liguori)
+  - target-mips: fix ROTR and DROTR by zero (Aurelien Jarno)
+  - target-mips: fix CpU exception for coprocessor 0 (Nathan Froyd)
+  - tcg/mips: fix crash in tcg_out_qemu_ld() (Aurelien Jarno)
+  - target-mips: don't call cpu_loop_exit() from helper.c (Aurelien Jarno)
+  - virtio-blk: Fix error cases which ignored rerror/werror (Kevin Wolf)
+  - virtio-blk: Fix restart after read error (Kevin Wolf)
+  - virtio_blk: Factor virtio_blk_handle_request out (Kevin Wolf)
+  - cirrus: Properly re-register cirrus_linear_io_addr on vram unmap (Jan Kiszka)
+  - qcow2: Don't ignore qcow2_alloc_clusters return value (Kevin Wolf)
+  - qcow2: Don't ignore update_refcount return value (Kevin Wolf)
+  - qcow2: Allow updating no refcounts (Kevin Wolf)
+  - qcow2: Improve error handling in update_refcount (Kevin Wolf)
+  - qcow2: Fix error handling in grow_refcount_table (Kevin Wolf)
+  - block: Return original error codes in bdrv_pread/write (Kevin Wolf)
+  - qcow2: Return 0/-errno in qcow2_alloc_cluster_offset (Kevin Wolf)
+  - qcow2: Return 0/-errno in get_cluster_table (Kevin Wolf)
+  - qcow2: Fix error handling in qcow_save_vmstate (Kevin Wolf)
+  - qcow2: Fix error handling in qcow2_grow_l1_table (Kevin Wolf)
+  - win32/sdl: Fix toggle full screen (Herve Poussineau)
+  - win32: pair qemu_memalign() with qemu_vfree() (Herve Poussineau)
+  - vnc_refresh: calling vnc_update_client might free vs (Stefano Stabellini)
+  - Musicpal: Fix descriptor walk in eth_send (Jan Kiszka)
+  - Musicpal: Fix wm8750 I2C address (Jan Kiszka)
+  - fix savevm command without id or tag (Marcelo Tosatti)
+  - reduce number of reinjects on ACK (Gleb Natapov)
+  - QMP: Fix asynchronous events delivery (Luiz Capitulino)
+  - Documentation: Add missing documentation for qdev related command line options (Stefan Weil)
+  - pc: add driver version compat properties (Gerd Hoffmann)
+  - scsi: device version property (Gerd Hoffmann)
+  - ide: device version property (Gerd Hoffmann)
+  - QMP: Emit asynchronous events on all QMP monitors (Adam Litke)
+  - Fix QEMU_WARN_UNUSED_RESULT (Kevin Wolf)
+
+version 0.12.2:
+  - Qemu's internal TFTP server breaks lock-step-iness of TFTP (Milan Plzik)
+  - osdep.c: Fix accept4 fallback (Kevin Wolf)
+  - pc: add rombar to compat properties for pc-0.10 and pc-0.11 (Gerd Hoffmann)
+  - pci: allow loading roms via fw_cfg. (Gerd Hoffmann)
+  - roms: rework rom loading via fw (Gerd Hoffmann)
+  - fw_cfg: rom loader tweaks. (Gerd Hoffmann)
+  - roms: minor fixes and cleanups. (Gerd Hoffmann)
+  - pc: add machine type for 0.12 (Gerd Hoffmann)
+  - loader: more ignores for rom intended to be loaded by the bios (Aurelien Jarno)
+  - vnc_refresh: return if vd->timer is NULL (Stefano Stabellini)
+  - QMP: Don't free async event's 'data' (Luiz Capitulino)
+  - Handle TFTP ERROR from client (Thomas Horsten)
+  - dmg: fix ->open failure (Christoph Hellwig)
+  - virtio-pci: thinko fix (Michael S. Tsirkin)
+  - pc-bios: Update README (SeaBIOS) (Stefan Weil)
+  - vmware_vga: Check cursor dimensions passed from guest to avoid buffer overflow (Roland Dreier)
+  - remove pending exception on vcpu reset. (Gleb Natapov)
+  - Fix CPU topology initialization (Jiri Denemark)
+  - MCE: Fix bug of IA32_MCG_STATUS after system reset (Huang Ying)
+  - linuxboot: fix gdt address calculation (Avi Kivity)
+  - QMP: Drop wrong assert() (Luiz Capitulino)
+  - vnc: Fix artifacts in hextile decoding (Anthony Liguori)
+  - target-i386: Fix "call im" on x86_64 when executing 32-bit code (Aurelien Jarno)
+  - Add missing newline at the end of options list (Michael Tokarev)
+  - Don't load options roms intended to be loaded by the bios in qemu (Avi Kivity)
+  - USB: Improve usbdevice error messages (Scott Tsai)
+  - cpu-all.h: fix cpu_get_real_ticks() #ifdef (Aurelien Jarno)
+  - alpha: fix compile (Blue Swirl)
+  - user_only: compile everything with -fpie (Kirill A. Shutemov)
+  - fdc/sparc32: don't hang on detection under OBP (Artyom Tarasenko)
+  - scsi-disk: Inquiry with allocation length of CDB < 36 (v4) (Artyom Tarasenko)
+  - e1000: fix init values for command register (Michael S. Tsirkin)
+
+version 0.12.1:
+  - loader: fix rom loading at address 0 (fixes target-arm) (Aurelien Jarno)
+  - loader: fix rom_copy (fixes multiboot) (Kevin Wolf)
+
+version 0.12.0:
+
+  - Update to SeaBIOS 0.5.0
+  - e1000: fix device link status in Linux (Anthony Liguori)
+  - monitor: fix QMP for balloon command (Luiz Capitulino)
+  - QMP: Return an empty dict by default (Luiz Capitulino)
+  - QMP: Only handle converted commands (Luiz Capitulino)
+  - pci: support PCI based option rom loading (Gerd Hoffman/Anthony Liguori)
+  - Fix backcompat for hotplug of SCSI controllers (Daniel P. Berrange)
+  - fdc: fix migration from 0.11 (Juan Quintela)
+  - vmware-vga: fix segv on cursor resize. (Dave Airlie)
+  - vmware-vga: various fixes (Dave Airlie/Anthony Liguori)
+  - qdev: improve property error reporting. (Gerd Hoffmann)
+  - fix vga names in default_list (Gerd Hoffmann)
+  - usb-host: check mon before using it. (Gerd Hoffmann)
+  - usb-net: use qdev for -usbdevice (Gerd Hoffmann)
+  - monitor: Catch printing to non-existent monitor (Luiz Capitulino)
+  - Avoid permanently disabled QEMU monitor when UNIX migration fails (Daniel P. Berrange)
+  - Fix loading of ELF multiboot kernels (Kevin Wolf)
+  - qemu-io: Fix memory leak (Kevin Wolf)
+  - Fix thinko in linuxboot.S (Paolo Bonzini)
+  - target-i386: Fix evaluation of DR7 register (Jan Kiszka)
+  - vnc: hextile: do not generate ForegroundSpecified and SubrectsColoured tiles (Anthony Liguori)
+  - S390: Bail out without KVM (Alexander Graf)
+  - S390: Don't tell guest we're updating config space (Alexander Graf)
+  - target-s390: Fail on unknown instructions (Alexander Graf)
+  - osdep: Fix runtime failure on older Linux kernels (Andre Przywara)
+  - Fix a make -j race (Juergen Lock)
+  - target-alpha: Fix generic ctz64. (Richard Henderson)
+  - s390: Fix buggy assignment (Stefan Weil)
+  - target-mips: fix user-mode emulation startup (Nathan Froyd)
+  - target-i386: Update CPUID feature set for TCG (Andre Przywara)
+  - s390: fix build on 32 bit host (Michael S. Tsirkin)
+	
 version 0.12.0-rc2:
 
   - v2: properly save kvm system time msr registers (Glauber Costa)

Makefile

@@ -70,7 +70,7 @@ $(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
 
 $(filter %-user,$(SUBDIR_RULES)): libuser.a
 
-libuser.a:
+libuser.a: $(GENERATED_HEADERS)
 	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C libuser V="$(V)" TARGET_DIR="libuser/" all,)
 
 ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))

Makefile.user

@@ -2,10 +2,15 @@
 
 include ../config-host.mak
 include $(SRC_PATH)/rules.mak
+-include config.mak
 
 .PHONY: all
 
-VPATH=$(SRC_PATH)
+# Do not take %.o from $(SRC_PATH), only %.c and %.h
+# All %.o for user targets should be built with -fpie, when
+# configured with --enable-user-pie, so we don't want to
+# take %.o from $(SRC_PATH), since they built without -fpie
+vpath %.c %.h $(SRC_PATH)
 
 QEMU_CFLAGS+=-I..
 

QMP/README

@@ -4,45 +4,57 @@
 Introduction
 -------------
 
-The QEMU Monitor Protocol (QMP) is a JSON[1] based protocol for QEMU.
+The QEMU Monitor Protocol (QMP) allows applications to communicate with
+QEMU's Monitor.
 
-By using it applications can control QEMU in reliable and "parseable" way,
-QMP also provides asynchronous events support.
+QMP is JSON[1] based and has the following features:
+
+- Lightweight, text-based, easy to parse data format
+- Asynchronous events support 
+- Stability
 
 For more information, please, refer to the following files:
 
-o qmp-spec.txt    QEMU Monitor Protocol current draft specification
+o qmp-spec.txt    QEMU Monitor Protocol current specification
 o qmp-events.txt  List of available asynchronous events
 
 There are also two simple Python scripts available:
 
 o qmp-shell       A shell
-o vm-info         Show some informations about the Virtal Machine
+o vm-info         Show some information about the Virtual Machine
 
 [1] http://www.json.org
 
 Usage
 -----
 
-To enable QMP, QEMU has to be started in "control mode". This is done
-by passing the flag "control" to the "-monitor" command-line option.
+To enable QMP, QEMU has to be started in "control mode". There are
+two ways of doing this, the simplest one is using the the '-qmp'
+command-line option.
 
 For example:
 
-$ qemu [...] -monitor control,tcp:localhost:4444,server
+$ qemu [...] -qmp tcp:localhost:4444,server
 
 Will start QEMU in control mode, waiting for a client TCP connection
 on localhost port 4444.
 
-To manually test it you can connect with telnet and issue commands:
+It is also possible to use the '-mon' command-line option to have
+more complex combinations. Please, refer to the QEMU's manpage for
+more information.
+
+Simple Testing
+--------------
+
+To manually test QMP one can connect with telnet and issue commands:
 
 $ telnet localhost 4444
-Trying ::1...
+Trying 127.0.0.1...
 Connected to localhost.
 Escape character is '^]'.
 {"QMP": {"capabilities": []}}
 { "execute": "query-version" }
-{"return": "0.11.50"}
+{"return": {"qemu": "0.11.50", "package": ""}}
 
 Contact
 -------

QMP/qmp-spec.txt

@@ -1,4 +1,4 @@
-           QEMU Monitor Protocol Draft Specification - Version 0.1
+           QEMU Monitor Protocol Specification - Version 0.1
 
 1. Introduction
 ===============
@@ -27,9 +27,9 @@ the JSON standard:
 
 http://www.ietf.org/rfc/rfc4627.txt
 
-For convenience, json-objects mentioned in this document will have its members
-in a certain order. However, in real protocol usage json-objects members can
-be in ANY order, thus no particular order should be assumed.
+For convenience, json-object members and json-array elements mentioned in
+this document will be in a certain order. However, in real protocol usage
+they can be in ANY order, thus no particular order should be assumed.
 
 2.1 General Definitions
 -----------------------
@@ -85,12 +85,13 @@ without errors.
 
 The format is:
 
-{ "return": json-value, "id": json-value }
+{ "return": json-object, "id": json-value }
 
  Where,
 
 - The "return" member contains the command returned data, which is defined
-  in a per-command basis or "OK" if the command does not return data
+  in a per-command basis or an empty json-object if the command does not
+  return data
 - The "id" member contains the transaction identification associated
   with the command execution (if issued by the Client)
 
@@ -102,7 +103,7 @@ completed because of an error condition.
 
 The format is:
 
-{ "error": { "class": json-string, "data": json-value, "desc": json-string },
+{ "error": { "class": json-string, "data": json-object, "desc": json-string },
   "id": json-value }
 
  Where,
@@ -110,7 +111,7 @@ The format is:
 - The "class" member contains the error class name (eg. "ServiceUnavailable")
 - The "data" member contains specific error data and is defined in a
   per-command basis, it will be an empty json-object if the error has no data
-- The "desc" member is a human-readable error message.  Clients should
+- The "desc" member is a human-readable error message. Clients should
   not attempt to parse this message.
 - The "id" member contains the transaction identification associated with
   the command execution (if issued by the Client)
@@ -127,7 +128,7 @@ to the Client at any time. They are called 'asynchronous events'.
 
 The format is:
 
-{ "event": json-string, "data": json-value,
+{ "event": json-string, "data": json-object,
   "timestamp": { "seconds": json-number, "microseconds": json-number } }
 
  Where,
@@ -135,7 +136,7 @@ The format is:
 - The "event" member contains the event's name
 - The "data" member contains event specific data, which is defined in a
   per-event basis, it is optional
-- The "timestamp" member contains the exact time of when the event ocurred
+- The "timestamp" member contains the exact time of when the event occurred
   in the Server. It is a fixed json-object with time in seconds and
   microseconds
 
@@ -157,19 +158,20 @@ S: {"QMP": {"capabilities": []}}
 ---------------------------
 
 C: { "execute": "stop" }
-S: {"return": "OK"}
+S: {"return": {}}
 
 3.3 KVM information
 -------------------
 
-C: {"execute": "query-kvm", "id": "example"}
-S: {"return": "enabled", "id": "example"}
+C: { "execute": "query-kvm", "id": "example" }
+S: {"return": {"enabled": true, "present": true}, "id": "example"}
 
 3.4 Parsing error
 ------------------
 
 C: { "execute": }
-S: {"error": {"class": "JSONParsing", "data": {}}}
+S: {"error": {"class": "JSONParsing", "desc": "Invalid JSON syntax", "data":
+{}}}
 
 3.5 Powerdown event
 -------------------
@@ -177,19 +179,25 @@ S: {"error": {"class": "JSONParsing", "data": {}}}
 S: {"timestamp": {"seconds": 1258551470, "microseconds": 802384}, "event":
 "POWERDOWN"}
 
-4. Notes to Client implementors
--------------------------------
+4. Compatibility Considerations
+--------------------------------
 
-4.1 It is recommended to always start the Server in pause mode, thus the
-    Client is able to perform any setup procedure without the risk of
-    race conditions and related problems
+In order to achieve maximum compatibility between versions, Clients must not 
+assume any particular:
 
-4.2 It is recommended to always check the capabilities json-array, issued
-    with the greeting message, at connection time
+- Size of json-objects or length of json-arrays
+- Order of json-object members or json-array elements
+- Amount of errors generated by a command, that is, new errors can be added
+  to any existing command in newer versions of the Server
 
-4.3 Json-objects or json-arrays mentioned in this document are not fixed
-    and no particular size or number of members/elements should be assumed.
-    New members/elements can be added at any time.
+Additionally, Clients should always:
 
-4.4 No particular order of json-objects members should be assumed, they
-    can change at any time
+- Check the capabilities json-array at connection time
+- Check the availability of commands with 'query-commands' before issuing them
+
+5. Recommendations to Client implementors
+-----------------------------------------
+
+5.1 The Server should be always started in pause mode, thus the Client is
+    able to perform any setup procedure without the risk of race conditions
+    and related problems

VERSION

@@ -1 +1 @@
-0.11.92
+0.12.4

audio/ossaudio.c

@@ -38,6 +38,10 @@
 #define AUDIO_CAP "oss"
 #include "audio_int.h"
 
+#if defined OSS_GETVERSION && defined SNDCTL_DSP_POLICY
+#define USE_DSP_POLICY
+#endif
+
 typedef struct OSSVoiceOut {
     HWVoiceOut hw;
     void *pcm_buf;
@@ -236,14 +240,39 @@ static void oss_dump_info (struct oss_params *req, struct oss_params *obt)
 }
 #endif
 
+#ifdef USE_DSP_POLICY
+static int oss_get_version (int fd, int *version, const char *typ)
+{
+    if (ioctl (fd, OSS_GETVERSION, &version)) {
+#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
+        /*
+         * Looks like atm (20100109) FreeBSD knows OSS_GETVERSION
+         * since 7.x, but currently only on the mixer device (or in
+         * the Linuxolator), and in the native version that part of
+         * the code is in fact never reached so the ioctl fails anyway.
+         * Until this is fixed, just check the errno and if its what
+         * FreeBSD's sound drivers return atm assume they are new enough.
+         */
+        if (errno == EINVAL) {
+            *version = 0x040000;
+            return 0;
+        }
+#endif
+        oss_logerr2 (errno, typ, "Failed to get OSS version\n");
+        return -1;
+    }
+    return 0;
+}
+#endif
+
 static int oss_open (int in, struct oss_params *req,
                      struct oss_params *obt, int *pfd)
 {
     int fd;
-    int version;
     int oflags = conf.exclusive ? O_EXCL : 0;
     audio_buf_info abinfo;
     int fmt, freq, nchannels;
+    int setfragment = 1;
     const char *dspname = in ? conf.devpath_in : conf.devpath_out;
     const char *typ = in ? "ADC" : "DAC";
 
@@ -281,27 +310,30 @@ static int oss_open (int in, struct oss_params *req,
         goto err;
     }
 
-    if (ioctl (fd, OSS_GETVERSION, &version)) {
-        oss_logerr2 (errno, typ, "Failed to get OSS version\n");
-        version = 0;
-    }
+#ifdef USE_DSP_POLICY
+    if (conf.policy >= 0) {
+        int version;
 
-    if (conf.debug) {
-        dolog ("OSS version = %#x\n", version);
-    }
+        if (!oss_get_version (fd, &version, typ)) {
+            if (conf.debug) {
+                dolog ("OSS version = %#x\n", version);
+            }
 
-#ifdef SNDCTL_DSP_POLICY
-    if (conf.policy >= 0 && version >= 0x040000) {
-        int policy = conf.policy;
-        if (ioctl (fd, SNDCTL_DSP_POLICY, &policy)) {
-            oss_logerr2 (errno, typ, "Failed to set timing policy to %d\n",
-                         conf.policy);
-            goto err;
+            if (version >= 0x040000) {
+                int policy = conf.policy;
+                if (ioctl (fd, SNDCTL_DSP_POLICY, &policy)) {
+                    oss_logerr2 (errno, typ,
+                                 "Failed to set timing policy to %d\n",
+                                 conf.policy);
+                    goto err;
+                }
+                setfragment = 0;
+            }
         }
     }
-    else
 #endif
-    {
+
+    if (setfragment) {
         int mmmmssss = (req->nfrags << 16) | ctz32 (req->fragsize);
         if (ioctl (fd, SNDCTL_DSP_SETFRAGMENT, &mmmmssss)) {
             oss_logerr2 (errno, typ, "Failed to set buffer length (%d, %d)\n",
@@ -857,7 +889,7 @@ static struct audio_option oss_options[] = {
         .valp  = &conf.exclusive,
         .descr = "Open device in exclusive mode (vmix wont work)"
     },
-#ifdef SNDCTL_DSP_POLICY
+#ifdef USE_DSP_POLICY
     {
         .name  = "POLICY",
         .tag   = AUD_OPT_INT,

block.c

@@ -691,6 +691,7 @@ int bdrv_pread(BlockDriverState *bs, int64_t offset,
     uint8_t tmp_buf[BDRV_SECTOR_SIZE];
     int len, nb_sectors, count;
     int64_t sector_num;
+    int ret;
 
     count = count1;
     /* first read to align to sector start */
@@ -699,8 +700,8 @@ int bdrv_pread(BlockDriverState *bs, int64_t offset,
         len = count;
     sector_num = offset >> BDRV_SECTOR_BITS;
     if (len > 0) {
-        if (bdrv_read(bs, sector_num, tmp_buf, 1) < 0)
-            return -EIO;
+        if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
+            return ret;
         memcpy(buf, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), len);
         count -= len;
         if (count == 0)
@@ -712,8 +713,8 @@ int bdrv_pread(BlockDriverState *bs, int64_t offset,
     /* read the sectors "in place" */
     nb_sectors = count >> BDRV_SECTOR_BITS;
     if (nb_sectors > 0) {
-        if (bdrv_read(bs, sector_num, buf, nb_sectors) < 0)
-            return -EIO;
+        if ((ret = bdrv_read(bs, sector_num, buf, nb_sectors)) < 0)
+            return ret;
         sector_num += nb_sectors;
         len = nb_sectors << BDRV_SECTOR_BITS;
         buf += len;
@@ -722,8 +723,8 @@ int bdrv_pread(BlockDriverState *bs, int64_t offset,
 
     /* add data from the last sector */
     if (count > 0) {
-        if (bdrv_read(bs, sector_num, tmp_buf, 1) < 0)
-            return -EIO;
+        if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
+            return ret;
         memcpy(buf, tmp_buf, count);
     }
     return count1;
@@ -735,6 +736,7 @@ int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
     uint8_t tmp_buf[BDRV_SECTOR_SIZE];
     int len, nb_sectors, count;
     int64_t sector_num;
+    int ret;
 
     count = count1;
     /* first write to align to sector start */
@@ -743,11 +745,11 @@ int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
         len = count;
     sector_num = offset >> BDRV_SECTOR_BITS;
     if (len > 0) {
-        if (bdrv_read(bs, sector_num, tmp_buf, 1) < 0)
-            return -EIO;
+        if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
+            return ret;
         memcpy(tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), buf, len);
-        if (bdrv_write(bs, sector_num, tmp_buf, 1) < 0)
-            return -EIO;
+        if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
+            return ret;
         count -= len;
         if (count == 0)
             return count1;
@@ -758,8 +760,8 @@ int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
     /* write the sectors "in place" */
     nb_sectors = count >> BDRV_SECTOR_BITS;
     if (nb_sectors > 0) {
-        if (bdrv_write(bs, sector_num, buf, nb_sectors) < 0)
-            return -EIO;
+        if ((ret = bdrv_write(bs, sector_num, buf, nb_sectors)) < 0)
+            return ret;
         sector_num += nb_sectors;
         len = nb_sectors << BDRV_SECTOR_BITS;
         buf += len;
@@ -768,11 +770,11 @@ int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
 
     /* add data from the last sector */
     if (count > 0) {
-        if (bdrv_read(bs, sector_num, tmp_buf, 1) < 0)
-            return -EIO;
+        if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
+            return ret;
         memcpy(tmp_buf, buf, count);
-        if (bdrv_write(bs, sector_num, tmp_buf, 1) < 0)
-            return -EIO;
+        if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
+            return ret;
     }
     return count1;
 }
@@ -1606,8 +1608,11 @@ static void multiwrite_user_cb(MultiwriteCB *mcb)
 
     for (i = 0; i < mcb->num_callbacks; i++) {
         mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
+        if (mcb->callbacks[i].free_qiov) {
+            qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
+        }
         qemu_free(mcb->callbacks[i].free_qiov);
-        qemu_free(mcb->callbacks[i].free_buf);
+        qemu_vfree(mcb->callbacks[i].free_buf);
     }
 }
 
@@ -1615,7 +1620,7 @@ static void multiwrite_cb(void *opaque, int ret)
 {
     MultiwriteCB *mcb = opaque;
 
-    if (ret < 0) {
+    if (ret < 0 && !mcb->error) {
         mcb->error = ret;
         multiwrite_user_cb(mcb);
     }
@@ -1667,6 +1672,10 @@ static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
             merge = bs->drv->bdrv_merge_requests(bs, &reqs[outidx], &reqs[i]);
         }
 
+        if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
+            merge = 0;
+        }
+
         if (merge) {
             size_t size;
             QEMUIOVector *qiov = qemu_mallocz(sizeof(*qiov));
@@ -1752,10 +1761,11 @@ int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
             // submitted yet. Otherwise we'll wait for the submitted AIOs to
             // complete and report the error in the callback.
             if (mcb->num_requests == 0) {
-                reqs[i].error = EIO;
+                reqs[i].error = -EIO;
                 goto fail;
             } else {
-                mcb->error = EIO;
+                mcb->num_requests++;
+                multiwrite_cb(mcb, -EIO);
                 break;
             }
         } else {

block/curl.c

@@ -309,7 +309,7 @@ static int curl_open(BlockDriverState *bs, const char *filename, int flags)
 
     static int inited = 0;
 
-    file = strdup(filename);
+    file = qemu_strdup(filename);
     s->readahead_size = READ_AHEAD_SIZE;
 
     /* Parse a trailing ":readahead=#:" param, if present. */

block/dmg.c

@@ -90,24 +90,21 @@ static int dmg_open(BlockDriverState *bs, const char *filename, int flags)
 
     /* read offset of info blocks */
     if(lseek(s->fd,-0x1d8,SEEK_END)<0) {
-dmg_close:
-	close(s->fd);
-	/* open raw instead */
-	bs->drv=bdrv_find_format("raw");
-	return bs->drv->bdrv_open(bs, filename, flags);
+        goto fail;
     }
+
     info_begin=read_off(s->fd);
     if(info_begin==0)
-	goto dmg_close;
+	goto fail;
     if(lseek(s->fd,info_begin,SEEK_SET)<0)
-	goto dmg_close;
+	goto fail;
     if(read_uint32(s->fd)!=0x100)
-	goto dmg_close;
+	goto fail;
     if((count = read_uint32(s->fd))==0)
-	goto dmg_close;
+	goto fail;
     info_end = info_begin+count;
     if(lseek(s->fd,0xf8,SEEK_CUR)<0)
-	goto dmg_close;
+	goto fail;
 
     /* read offsets */
     last_in_offset = last_out_offset = 0;
@@ -116,14 +113,14 @@ dmg_close:
 
 	count = read_uint32(s->fd);
 	if(count==0)
-	    goto dmg_close;
+	    goto fail;
 	type = read_uint32(s->fd);
 	if(type!=0x6d697368 || count<244)
 	    lseek(s->fd,count-4,SEEK_CUR);
 	else {
 	    int new_size, chunk_count;
 	    if(lseek(s->fd,200,SEEK_CUR)<0)
-	        goto dmg_close;
+	        goto fail;
 	    chunk_count = (count-204)/40;
 	    new_size = sizeof(uint64_t) * (s->n_chunks + chunk_count);
 	    s->types = qemu_realloc(s->types, new_size/2);
@@ -142,7 +139,7 @@ dmg_close:
 		    chunk_count--;
 		    i--;
 		    if(lseek(s->fd,36,SEEK_CUR)<0)
-			goto dmg_close;
+			goto fail;
 		    continue;
 		}
 		read_uint32(s->fd);
@@ -163,11 +160,14 @@ dmg_close:
     s->compressed_chunk = qemu_malloc(max_compressed_size+1);
     s->uncompressed_chunk = qemu_malloc(512*max_sectors_per_chunk);
     if(inflateInit(&s->zstream) != Z_OK)
-	goto dmg_close;
+	goto fail;
 
     s->current_chunk = s->n_chunks;
 
     return 0;
+fail:
+    close(s->fd);
+    return -1;
 }
 
 static inline int is_sector_in_chunk(BDRVDMGState* s,

block/qcow2-cluster.c

@@ -33,7 +33,7 @@ int qcow2_grow_l1_table(BlockDriverState *bs, int min_size)
     BDRVQcowState *s = bs->opaque;
     int new_l1_size, new_l1_size2, ret, i;
     uint64_t *new_l1_table;
-    uint64_t new_l1_table_offset;
+    int64_t new_l1_table_offset;
     uint8_t data[12];
 
     new_l1_size = s->l1_size;
@@ -55,6 +55,10 @@ int qcow2_grow_l1_table(BlockDriverState *bs, int min_size)
 
     /* write new table (align to cluster) */
     new_l1_table_offset = qcow2_alloc_clusters(bs, new_l1_size2);
+    if (new_l1_table_offset < 0) {
+        qemu_free(new_l1_table);
+        return new_l1_table_offset;
+    }
 
     for(i = 0; i < s->l1_size; i++)
         new_l1_table[i] = cpu_to_be64(new_l1_table[i]);
@@ -67,9 +71,10 @@ int qcow2_grow_l1_table(BlockDriverState *bs, int min_size)
     /* set new table */
     cpu_to_be32w((uint32_t*)data, new_l1_size);
     cpu_to_be64w((uint64_t*)(data + 4), new_l1_table_offset);
-    if (bdrv_pwrite(s->hd, offsetof(QCowHeader, l1_size), data,
-                sizeof(data)) != sizeof(data))
+    ret = bdrv_pwrite(s->hd, offsetof(QCowHeader, l1_size), data,sizeof(data));
+    if (ret != sizeof(data)) {
         goto fail;
+    }
     qemu_free(s->l1_table);
     qcow2_free_clusters(bs, s->l1_table_offset, s->l1_size * sizeof(uint64_t));
     s->l1_table_offset = new_l1_table_offset;
@@ -77,8 +82,9 @@ int qcow2_grow_l1_table(BlockDriverState *bs, int min_size)
     s->l1_size = new_l1_size;
     return 0;
  fail:
-    qemu_free(s->l1_table);
-    return -EIO;
+    qemu_free(new_l1_table);
+    qcow2_free_clusters(bs, new_l1_table_offset, new_l1_size2);
+    return ret < 0 ? ret : -EIO;
 }
 
 void qcow2_l2_cache_reset(BlockDriverState *bs)
@@ -213,13 +219,17 @@ static uint64_t *l2_allocate(BlockDriverState *bs, int l1_index)
     BDRVQcowState *s = bs->opaque;
     int min_index;
     uint64_t old_l2_offset;
-    uint64_t *l2_table, l2_offset;
+    uint64_t *l2_table;
+    int64_t l2_offset;
 
     old_l2_offset = s->l1_table[l1_index];
 
     /* allocate a new l2 entry */
 
     l2_offset = qcow2_alloc_clusters(bs, s->l2_size * sizeof(uint64_t));
+    if (l2_offset < 0) {
+        return NULL;
+    }
 
     /* update the L1 entry */
 
@@ -479,8 +489,8 @@ out:
  * the l2 table offset in the qcow2 file and the cluster index
  * in the l2 table are given to the caller.
  *
+ * Returns 0 on success, -errno in failure case
  */
-
 static int get_cluster_table(BlockDriverState *bs, uint64_t offset,
                              uint64_t **new_l2_table,
                              uint64_t *new_l2_offset,
@@ -496,8 +506,9 @@ static int get_cluster_table(BlockDriverState *bs, uint64_t offset,
     l1_index = offset >> (s->l2_bits + s->cluster_bits);
     if (l1_index >= s->l1_size) {
         ret = qcow2_grow_l1_table(bs, l1_index + 1);
-        if (ret < 0)
-            return 0;
+        if (ret < 0) {
+            return ret;
+        }
     }
     l2_offset = s->l1_table[l1_index];
 
@@ -507,14 +518,16 @@ static int get_cluster_table(BlockDriverState *bs, uint64_t offset,
         /* load the l2 table in memory */
         l2_offset &= ~QCOW_OFLAG_COPIED;
         l2_table = l2_load(bs, l2_offset);
-        if (l2_table == NULL)
-            return 0;
+        if (l2_table == NULL) {
+            return -EIO;
+        }
     } else {
         if (l2_offset)
             qcow2_free_clusters(bs, l2_offset, s->l2_size * sizeof(uint64_t));
         l2_table = l2_allocate(bs, l1_index);
-        if (l2_table == NULL)
-            return 0;
+        if (l2_table == NULL) {
+            return -EIO;
+        }
         l2_offset = s->l1_table[l1_index] & ~QCOW_OFLAG_COPIED;
     }
 
@@ -526,7 +539,7 @@ static int get_cluster_table(BlockDriverState *bs, uint64_t offset,
     *new_l2_offset = l2_offset;
     *new_l2_index = l2_index;
 
-    return 1;
+    return 0;
 }
 
 /*
@@ -548,12 +561,14 @@ uint64_t qcow2_alloc_compressed_cluster_offset(BlockDriverState *bs,
 {
     BDRVQcowState *s = bs->opaque;
     int l2_index, ret;
-    uint64_t l2_offset, *l2_table, cluster_offset;
+    uint64_t l2_offset, *l2_table;
+    int64_t cluster_offset;
     int nb_csectors;
 
     ret = get_cluster_table(bs, offset, &l2_table, &l2_offset, &l2_index);
-    if (ret == 0)
+    if (ret < 0) {
         return 0;
+    }
 
     cluster_offset = be64_to_cpu(l2_table[l2_index]);
     if (cluster_offset & QCOW_OFLAG_COPIED)
@@ -563,6 +578,10 @@ uint64_t qcow2_alloc_compressed_cluster_offset(BlockDriverState *bs,
         qcow2_free_any_clusters(bs, cluster_offset, 1);
 
     cluster_offset = qcow2_alloc_bytes(bs, compressed_size);
+    if (cluster_offset < 0) {
+        return 0;
+    }
+
     nb_csectors = ((cluster_offset + compressed_size - 1) >> 9) -
                   (cluster_offset >> 9);
 
@@ -605,12 +624,12 @@ static int write_l2_entries(BDRVQcowState *s, uint64_t *l2_table,
     return 0;
 }
 
-int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, uint64_t cluster_offset,
-    QCowL2Meta *m)
+int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m)
 {
     BDRVQcowState *s = bs->opaque;
     int i, j = 0, l2_index, ret;
     uint64_t *old_cluster, start_sect, l2_offset, *l2_table;
+    uint64_t cluster_offset = m->cluster_offset;
 
     if (m->nb_clusters == 0)
         return 0;
@@ -633,10 +652,11 @@ int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, uint64_t cluster_offset,
             goto err;
     }
 
-    ret = -EIO;
     /* update L2 table */
-    if (!get_cluster_table(bs, m->offset, &l2_table, &l2_offset, &l2_index))
+    ret = get_cluster_table(bs, m->offset, &l2_table, &l2_offset, &l2_index);
+    if (ret < 0) {
         goto err;
+    }
 
     for (i = 0; i < m->nb_clusters; i++) {
         /* if two concurrent writes happen to the same unallocated cluster
@@ -670,30 +690,36 @@ err:
 /*
  * alloc_cluster_offset
  *
- * For a given offset of the disk image, return cluster offset in
- * qcow2 file.
- *
+ * For a given offset of the disk image, return cluster offset in qcow2 file.
  * If the offset is not found, allocate a new cluster.
  *
- * Return the cluster offset if successful,
- * Return 0, otherwise.
+ * If the cluster was already allocated, m->nb_clusters is set to 0,
+ * m->depends_on is set to NULL and the other fields in m are meaningless.
  *
+ * If the cluster is newly allocated, m->nb_clusters is set to the number of
+ * contiguous clusters that have been allocated. This may be 0 if the request
+ * conflict with another write request in flight; in this case, m->depends_on
+ * is set and the remaining fields of m are meaningless.
+ *
+ * If m->nb_clusters is non-zero, the other fields of m are valid and contain
+ * information about the first allocated cluster.
+ *
+ * Return 0 on success and -errno in error cases
  */
-
-uint64_t qcow2_alloc_cluster_offset(BlockDriverState *bs,
-                                    uint64_t offset,
-                                    int n_start, int n_end,
-                                    int *num, QCowL2Meta *m)
+int qcow2_alloc_cluster_offset(BlockDriverState *bs, uint64_t offset,
+    int n_start, int n_end, int *num, QCowL2Meta *m)
 {
     BDRVQcowState *s = bs->opaque;
     int l2_index, ret;
-    uint64_t l2_offset, *l2_table, cluster_offset;
+    uint64_t l2_offset, *l2_table;
+    int64_t cluster_offset;
     unsigned int nb_clusters, i = 0;
     QCowL2Meta *old_alloc;
 
     ret = get_cluster_table(bs, offset, &l2_table, &l2_offset, &l2_index);
-    if (ret == 0)
-        return 0;
+    if (ret < 0) {
+        return ret;
+    }
 
     nb_clusters = size_to_clusters(s, n_end << 9);
 
@@ -709,6 +735,7 @@ uint64_t qcow2_alloc_cluster_offset(BlockDriverState *bs,
 
         cluster_offset &= ~QCOW_OFLAG_COPIED;
         m->nb_clusters = 0;
+        m->depends_on = NULL;
 
         goto out;
     }
@@ -723,12 +750,15 @@ uint64_t qcow2_alloc_cluster_offset(BlockDriverState *bs,
     while (i < nb_clusters) {
         i += count_contiguous_clusters(nb_clusters - i, s->cluster_size,
                 &l2_table[l2_index], i, 0);
-
-        if(be64_to_cpu(l2_table[l2_index + i]))
+        if ((i >= nb_clusters) || be64_to_cpu(l2_table[l2_index + i])) {
             break;
+        }
 
         i += count_contiguous_free_clusters(nb_clusters - i,
                 &l2_table[l2_index + i]);
+        if (i >= nb_clusters) {
+            break;
+        }
 
         cluster_offset = be64_to_cpu(l2_table[l2_index + i]);
 
@@ -736,6 +766,7 @@ uint64_t qcow2_alloc_cluster_offset(BlockDriverState *bs,
                 (cluster_offset & QCOW_OFLAG_COMPRESSED))
             break;
     }
+    assert(i <= nb_clusters);
     nb_clusters = i;
 
     /*
@@ -779,6 +810,10 @@ uint64_t qcow2_alloc_cluster_offset(BlockDriverState *bs,
     /* allocate a new cluster */
 
     cluster_offset = qcow2_alloc_clusters(bs, nb_clusters * s->cluster_size);
+    if (cluster_offset < 0) {
+        QLIST_REMOVE(m, next_in_flight);
+        return cluster_offset;
+    }
 
     /* save info needed for meta data update */
     m->offset = offset;
@@ -787,10 +822,11 @@ uint64_t qcow2_alloc_cluster_offset(BlockDriverState *bs,
 
 out:
     m->nb_available = MIN(nb_clusters << (s->cluster_bits - 9), n_end);
+    m->cluster_offset = cluster_offset;
 
     *num = m->nb_available - n_start;
 
-    return cluster_offset;
+    return 0;
 }
 
 static int decompress_buffer(uint8_t *out_buf, int out_buf_size,

block/qcow2-refcount.c

@@ -27,7 +27,7 @@
 #include "block/qcow2.h"
 
 static int64_t alloc_clusters_noref(BlockDriverState *bs, int64_t size);
-static int update_refcount(BlockDriverState *bs,
+static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
                             int64_t offset, int64_t length,
                             int addend);
 
@@ -123,121 +123,266 @@ static int get_refcount(BlockDriverState *bs, int64_t cluster_index)
     return be16_to_cpu(s->refcount_block_cache[block_index]);
 }
 
-static int grow_refcount_table(BlockDriverState *bs, int min_size)
+/*
+ * Rounds the refcount table size up to avoid growing the table for each single
+ * refcount block that is allocated.
+ */
+static unsigned int next_refcount_table_size(BDRVQcowState *s,
+    unsigned int min_size)
 {
-    BDRVQcowState *s = bs->opaque;
-    int new_table_size, new_table_size2, refcount_table_clusters, i, ret;
-    uint64_t *new_table;
-    int64_t table_offset;
-    uint8_t data[12];
-    int old_table_size;
-    int64_t old_table_offset;
+    unsigned int min_clusters = (min_size >> (s->cluster_bits - 3)) + 1;
+    unsigned int refcount_table_clusters =
+        MAX(1, s->refcount_table_size >> (s->cluster_bits - 3));
 
-    if (min_size <= s->refcount_table_size)
-        return 0;
-    /* compute new table size */
-    refcount_table_clusters = s->refcount_table_size >> (s->cluster_bits - 3);
-    for(;;) {
-        if (refcount_table_clusters == 0) {
-            refcount_table_clusters = 1;
-        } else {
-            refcount_table_clusters = (refcount_table_clusters * 3 + 1) / 2;
-        }
-        new_table_size = refcount_table_clusters << (s->cluster_bits - 3);
-        if (min_size <= new_table_size)
-            break;
+    while (min_clusters > refcount_table_clusters) {
+        refcount_table_clusters = (refcount_table_clusters * 3 + 1) / 2;
     }
-#ifdef DEBUG_ALLOC2
-    printf("grow_refcount_table from %d to %d\n",
-           s->refcount_table_size,
-           new_table_size);
-#endif
-    new_table_size2 = new_table_size * sizeof(uint64_t);
-    new_table = qemu_mallocz(new_table_size2);
-    memcpy(new_table, s->refcount_table,
-           s->refcount_table_size * sizeof(uint64_t));
-    for(i = 0; i < s->refcount_table_size; i++)
-        cpu_to_be64s(&new_table[i]);
-    /* Note: we cannot update the refcount now to avoid recursion */
-    table_offset = alloc_clusters_noref(bs, new_table_size2);
-    ret = bdrv_pwrite(s->hd, table_offset, new_table, new_table_size2);
-    if (ret != new_table_size2)
-        goto fail;
-    for(i = 0; i < s->refcount_table_size; i++)
-        be64_to_cpus(&new_table[i]);
 
-    cpu_to_be64w((uint64_t*)data, table_offset);
-    cpu_to_be32w((uint32_t*)(data + 8), refcount_table_clusters);
-    if (bdrv_pwrite(s->hd, offsetof(QCowHeader, refcount_table_offset),
-                    data, sizeof(data)) != sizeof(data))
-        goto fail;
-    qemu_free(s->refcount_table);
-    old_table_offset = s->refcount_table_offset;
-    old_table_size = s->refcount_table_size;
-    s->refcount_table = new_table;
-    s->refcount_table_size = new_table_size;
-    s->refcount_table_offset = table_offset;
-
-    update_refcount(bs, table_offset, new_table_size2, 1);
-    qcow2_free_clusters(bs, old_table_offset, old_table_size * sizeof(uint64_t));
-    return 0;
- fail:
-    qemu_free(new_table);
-    return -EIO;
+    return refcount_table_clusters << (s->cluster_bits - 3);
 }
 
 
+/* Checks if two offsets are described by the same refcount block */
+static int in_same_refcount_block(BDRVQcowState *s, uint64_t offset_a,
+    uint64_t offset_b)
+{
+    uint64_t block_a = offset_a >> (2 * s->cluster_bits - REFCOUNT_SHIFT);
+    uint64_t block_b = offset_b >> (2 * s->cluster_bits - REFCOUNT_SHIFT);
+
+    return (block_a == block_b);
+}
+
+/*
+ * Loads a refcount block. If it doesn't exist yet, it is allocated first
+ * (including growing the refcount table if needed).
+ *
+ * Returns the offset of the refcount block on success or -errno in error case
+ */
 static int64_t alloc_refcount_block(BlockDriverState *bs, int64_t cluster_index)
 {
     BDRVQcowState *s = bs->opaque;
-    int64_t offset, refcount_block_offset;
     unsigned int refcount_table_index;
     int ret;
-    uint64_t data64;
-    int cache = cache_refcount_updates;
 
-    /* Find L1 index and grow refcount table if needed */
+    /* Find the refcount block for the given cluster */
     refcount_table_index = cluster_index >> (s->cluster_bits - REFCOUNT_SHIFT);
-    if (refcount_table_index >= s->refcount_table_size) {
-        ret = grow_refcount_table(bs, refcount_table_index + 1);
-        if (ret < 0)
+
+    if (refcount_table_index < s->refcount_table_size) {
+
+        uint64_t refcount_block_offset =
+            s->refcount_table[refcount_table_index];
+
+        /* If it's already there, we're done */
+        if (refcount_block_offset) {
+            if (refcount_block_offset != s->refcount_block_cache_offset) {
+                ret = load_refcount_block(bs, refcount_block_offset);
+                if (ret < 0) {
+                    return ret;
+                }
+            }
+            return refcount_block_offset;
+        }
+    }
+
+    /*
+     * If we came here, we need to allocate something. Something is at least
+     * a cluster for the new refcount block. It may also include a new refcount
+     * table if the old refcount table is too small.
+     *
+     * Note that allocating clusters here needs some special care:
+     *
+     * - We can't use the normal qcow2_alloc_clusters(), it would try to
+     *   increase the refcount and very likely we would end up with an endless
+     *   recursion. Instead we must place the refcount blocks in a way that
+     *   they can describe them themselves.
+     *
+     * - We need to consider that at this point we are inside update_refcounts
+     *   and doing the initial refcount increase. This means that some clusters
+     *   have already been allocated by the caller, but their refcount isn't
+     *   accurate yet. free_cluster_index tells us where this allocation ends
+     *   as long as we don't overwrite it by freeing clusters.
+     *
+     * - alloc_clusters_noref and qcow2_free_clusters may load a different
+     *   refcount block into the cache
+     */
+
+    if (cache_refcount_updates) {
+        ret = write_refcount_block(s);
+        if (ret < 0) {
             return ret;
+        }
     }
 
-    /* Load or allocate the refcount block */
-    refcount_block_offset = s->refcount_table[refcount_table_index];
-    if (!refcount_block_offset) {
-        if (cache_refcount_updates) {
-            write_refcount_block(s);
-            cache_refcount_updates = 0;
-        }
-        /* create a new refcount block */
-        /* Note: we cannot update the refcount now to avoid recursion */
-        offset = alloc_clusters_noref(bs, s->cluster_size);
-        memset(s->refcount_block_cache, 0, s->cluster_size);
-        ret = bdrv_pwrite(s->hd, offset, s->refcount_block_cache, s->cluster_size);
-        if (ret != s->cluster_size)
-            return -EINVAL;
-        s->refcount_table[refcount_table_index] = offset;
-        data64 = cpu_to_be64(offset);
-        ret = bdrv_pwrite(s->hd, s->refcount_table_offset +
-                          refcount_table_index * sizeof(uint64_t),
-                          &data64, sizeof(data64));
-        if (ret != sizeof(data64))
-            return -EINVAL;
+    /* Allocate the refcount block itself and mark it as used */
+    uint64_t new_block = alloc_clusters_noref(bs, s->cluster_size);
+    memset(s->refcount_block_cache, 0, s->cluster_size);
+    s->refcount_block_cache_offset = new_block;
 
-        refcount_block_offset = offset;
-        s->refcount_block_cache_offset = offset;
-        update_refcount(bs, offset, s->cluster_size, 1);
-        cache_refcount_updates = cache;
+#ifdef DEBUG_ALLOC2
+    fprintf(stderr, "qcow2: Allocate refcount block %d for %" PRIx64
+        " at %" PRIx64 "\n",
+        refcount_table_index, cluster_index << s->cluster_bits, new_block);
+#endif
+
+    if (in_same_refcount_block(s, new_block, cluster_index << s->cluster_bits)) {
+        /* The block describes itself, need to update the cache */
+        int block_index = (new_block >> s->cluster_bits) &
+            ((1 << (s->cluster_bits - REFCOUNT_SHIFT)) - 1);
+        s->refcount_block_cache[block_index] = cpu_to_be16(1);
     } else {
-        if (refcount_block_offset != s->refcount_block_cache_offset) {
-            if (load_refcount_block(bs, refcount_block_offset) < 0)
-                return -EIO;
+        /* Described somewhere else. This can recurse at most twice before we
+         * arrive at a block that describes itself. */
+        ret = update_refcount(bs, new_block, s->cluster_size, 1);
+        if (ret < 0) {
+            goto fail_block;
         }
     }
 
-    return refcount_block_offset;
+    /* Now the new refcount block needs to be written to disk */
+    ret = bdrv_pwrite(s->hd, new_block, s->refcount_block_cache,
+        s->cluster_size);
+    if (ret < 0) {
+        goto fail_block;
+    }
+
+    /* If the refcount table is big enough, just hook the block up there */
+    if (refcount_table_index < s->refcount_table_size) {
+        uint64_t data64 = cpu_to_be64(new_block);
+        ret = bdrv_pwrite(s->hd,
+            s->refcount_table_offset + refcount_table_index * sizeof(uint64_t),
+            &data64, sizeof(data64));
+        if (ret < 0) {
+            goto fail_block;
+        }
+
+        s->refcount_table[refcount_table_index] = new_block;
+        return new_block;
+    }
+
+    /*
+     * If we come here, we need to grow the refcount table. Again, a new
+     * refcount table needs some space and we can't simply allocate to avoid
+     * endless recursion.
+     *
+     * Therefore let's grab new refcount blocks at the end of the image, which
+     * will describe themselves and the new refcount table. This way we can
+     * reference them only in the new table and do the switch to the new
+     * refcount table at once without producing an inconsistent state in
+     * between.
+     */
+    /* Calculate the number of refcount blocks needed so far */
+    uint64_t refcount_block_clusters = 1 << (s->cluster_bits - REFCOUNT_SHIFT);
+    uint64_t blocks_used = (s->free_cluster_index +
+        refcount_block_clusters - 1) / refcount_block_clusters;
+
+    /* And now we need at least one block more for the new metadata */
+    uint64_t table_size = next_refcount_table_size(s, blocks_used + 1);
+    uint64_t last_table_size;
+    uint64_t blocks_clusters;
+    do {
+        uint64_t table_clusters = size_to_clusters(s, table_size);
+        blocks_clusters = 1 +
+            ((table_clusters + refcount_block_clusters - 1)
+            / refcount_block_clusters);
+        uint64_t meta_clusters = table_clusters + blocks_clusters;
+
+        last_table_size = table_size;
+        table_size = next_refcount_table_size(s, blocks_used +
+            ((meta_clusters + refcount_block_clusters - 1)
+            / refcount_block_clusters));
+
+    } while (last_table_size != table_size);
+
+#ifdef DEBUG_ALLOC2
+    fprintf(stderr, "qcow2: Grow refcount table %" PRId32 " => %" PRId64 "\n",
+        s->refcount_table_size, table_size);
+#endif
+
+    /* Create the new refcount table and blocks */
+    uint64_t meta_offset = (blocks_used * refcount_block_clusters) *
+        s->cluster_size;
+    uint64_t table_offset = meta_offset + blocks_clusters * s->cluster_size;
+    uint16_t *new_blocks = qemu_mallocz(blocks_clusters * s->cluster_size);
+    uint64_t *new_table = qemu_mallocz(table_size * sizeof(uint64_t));
+
+    assert(meta_offset >= (s->free_cluster_index * s->cluster_size));
+
+    /* Fill the new refcount table */
+    memcpy(new_table, s->refcount_table,
+        s->refcount_table_size * sizeof(uint64_t));
+    new_table[refcount_table_index] = new_block;
+
+    int i;
+    for (i = 0; i < blocks_clusters; i++) {
+        new_table[blocks_used + i] = meta_offset + (i * s->cluster_size);
+    }
+
+    /* Fill the refcount blocks */
+    uint64_t table_clusters = size_to_clusters(s, table_size * sizeof(uint64_t));
+    int block = 0;
+    for (i = 0; i < table_clusters + blocks_clusters; i++) {
+        new_blocks[block++] = cpu_to_be16(1);
+    }
+
+    /* Write refcount blocks to disk */
+    ret = bdrv_pwrite(s->hd, meta_offset, new_blocks,
+        blocks_clusters * s->cluster_size);
+    qemu_free(new_blocks);
+    if (ret < 0) {
+        goto fail_table;
+    }
+
+    /* Write refcount table to disk */
+    for(i = 0; i < table_size; i++) {
+        cpu_to_be64s(&new_table[i]);
+    }
+
+    ret = bdrv_pwrite(s->hd, table_offset, new_table,
+        table_size * sizeof(uint64_t));
+    if (ret < 0) {
+        goto fail_table;
+    }
+
+    for(i = 0; i < table_size; i++) {
+        cpu_to_be64s(&new_table[i]);
+    }
+
+    /* Hook up the new refcount table in the qcow2 header */
+    uint8_t data[12];
+    cpu_to_be64w((uint64_t*)data, table_offset);
+    cpu_to_be32w((uint32_t*)(data + 8), table_clusters);
+    ret = bdrv_pwrite(s->hd, offsetof(QCowHeader, refcount_table_offset),
+        data, sizeof(data));
+    if (ret < 0) {
+        goto fail_table;
+    }
+
+    /* And switch it in memory */
+    uint64_t old_table_offset = s->refcount_table_offset;
+    uint64_t old_table_size = s->refcount_table_size;
+
+    qemu_free(s->refcount_table);
+    s->refcount_table = new_table;
+    s->refcount_table_size = table_size;
+    s->refcount_table_offset = table_offset;
+
+    /* Free old table. Remember, we must not change free_cluster_index */
+    uint64_t old_free_cluster_index = s->free_cluster_index;
+    qcow2_free_clusters(bs, old_table_offset, old_table_size * sizeof(uint64_t));
+    s->free_cluster_index = old_free_cluster_index;
+
+    ret = load_refcount_block(bs, new_block);
+    if (ret < 0) {
+        goto fail_block;
+    }
+
+    return new_block;
+
+fail_table:
+    qemu_free(new_table);
+fail_block:
+    s->refcount_block_cache_offset = 0;
+    return ret;
 }
 
 #define REFCOUNTS_PER_SECTOR (512 >> REFCOUNT_SHIFT)
@@ -266,22 +411,26 @@ static int write_refcount_block_entries(BDRVQcowState *s,
 }
 
 /* XXX: cache several refcount block clusters ? */
-static int update_refcount(BlockDriverState *bs,
-                            int64_t offset, int64_t length,
-                            int addend)
+static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
+    int64_t offset, int64_t length, int addend)
 {
     BDRVQcowState *s = bs->opaque;
     int64_t start, last, cluster_offset;
     int64_t refcount_block_offset = 0;
     int64_t table_index = -1, old_table_index;
     int first_index = -1, last_index = -1;
+    int ret;
 
 #ifdef DEBUG_ALLOC2
     printf("update_refcount: offset=%" PRId64 " size=%" PRId64 " addend=%d\n",
            offset, length, addend);
 #endif
-    if (length <= 0)
+    if (length < 0) {
         return -EINVAL;
+    } else if (length == 0) {
+        return 0;
+    }
+
     start = offset & ~(s->cluster_size - 1);
     last = (offset + length - 1) & ~(s->cluster_size - 1);
     for(cluster_offset = start; cluster_offset <= last;
@@ -289,6 +438,7 @@ static int update_refcount(BlockDriverState *bs,
     {
         int block_index, refcount;
         int64_t cluster_index = cluster_offset >> s->cluster_bits;
+        int64_t new_block;
 
         /* Only write refcount block to disk when we are done with it */
         old_table_index = table_index;
@@ -306,10 +456,12 @@ static int update_refcount(BlockDriverState *bs,
         }
 
         /* Load the refcount block and allocate it if needed */
-        refcount_block_offset = alloc_refcount_block(bs, cluster_index);
-        if (refcount_block_offset < 0) {
-            return refcount_block_offset;
+        new_block = alloc_refcount_block(bs, cluster_index);
+        if (new_block < 0) {
+            ret = new_block;
+            goto fail;
         }
+        refcount_block_offset = new_block;
 
         /* we can update the count and save it */
         block_index = cluster_index &
@@ -323,24 +475,38 @@ static int update_refcount(BlockDriverState *bs,
 
         refcount = be16_to_cpu(s->refcount_block_cache[block_index]);
         refcount += addend;
-        if (refcount < 0 || refcount > 0xffff)
-            return -EINVAL;
+        if (refcount < 0 || refcount > 0xffff) {
+            ret = -EINVAL;
+            goto fail;
+        }
         if (refcount == 0 && cluster_index < s->free_cluster_index) {
             s->free_cluster_index = cluster_index;
         }
         s->refcount_block_cache[block_index] = cpu_to_be16(refcount);
     }
 
+    ret = 0;
+fail:
+
     /* Write last changed block to disk */
     if (refcount_block_offset != 0) {
         if (write_refcount_block_entries(s, refcount_block_offset,
             first_index, last_index) < 0)
         {
-            return -EIO;
+            return ret < 0 ? ret : -EIO;
         }
     }
 
-    return 0;
+    /*
+     * Try do undo any updates if an error is returned (This may succeed in
+     * some cases like ENOSPC for allocating a new refcount block)
+     */
+    if (ret < 0) {
+        int dummy;
+        dummy = update_refcount(bs, offset, cluster_offset - offset, -addend);
+    }
+
+    return ret;
 }
 
 /* addend must be 1 or -1 */
@@ -390,9 +556,13 @@ retry:
 int64_t qcow2_alloc_clusters(BlockDriverState *bs, int64_t size)
 {
     int64_t offset;
+    int ret;
 
     offset = alloc_clusters_noref(bs, size);
-    update_refcount(bs, offset, size, 1);
+    ret = update_refcount(bs, offset, size, 1);
+    if (ret < 0) {
+        return ret;
+    }
     return offset;
 }
 
@@ -407,6 +577,9 @@ int64_t qcow2_alloc_bytes(BlockDriverState *bs, int size)
     assert(size > 0 && size <= s->cluster_size);
     if (s->free_byte_offset == 0) {
         s->free_byte_offset = qcow2_alloc_clusters(bs, s->cluster_size);
+        if (s->free_byte_offset < 0) {
+            return s->free_byte_offset;
+        }
     }
  redo:
     free_in_cluster = s->cluster_size -
@@ -422,6 +595,9 @@ int64_t qcow2_alloc_bytes(BlockDriverState *bs, int size)
             update_cluster_refcount(bs, offset >> s->cluster_bits, 1);
     } else {
         offset = qcow2_alloc_clusters(bs, s->cluster_size);
+        if (offset < 0) {
+            return offset;
+        }
         cluster_offset = s->free_byte_offset & ~(s->cluster_size - 1);
         if ((cluster_offset + s->cluster_size) == offset) {
             /* we are lucky: contiguous data */
@@ -439,7 +615,13 @@ int64_t qcow2_alloc_bytes(BlockDriverState *bs, int size)
 void qcow2_free_clusters(BlockDriverState *bs,
                           int64_t offset, int64_t size)
 {
-    update_refcount(bs, offset, size, -1);
+    int ret;
+
+    ret = update_refcount(bs, offset, size, -1);
+    if (ret < 0) {
+        fprintf(stderr, "qcow2_free_clusters failed: %s\n", strerror(-ret));
+        abort();
+    }
 }
 
 /*
@@ -549,9 +731,15 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
                     if (offset & QCOW_OFLAG_COMPRESSED) {
                         nb_csectors = ((offset >> s->csize_shift) &
                                        s->csize_mask) + 1;
-                        if (addend != 0)
-                            update_refcount(bs, (offset & s->cluster_offset_mask) & ~511,
-                                            nb_csectors * 512, addend);
+                        if (addend != 0) {
+                            int ret;
+                            ret = update_refcount(bs,
+                                (offset & s->cluster_offset_mask) & ~511,
+                                nb_csectors * 512, addend);
+                            if (ret < 0) {
+                                goto fail;
+                            }
+                        }
                         /* compressed clusters are never modified */
                         refcount = 2;
                     } else {

block/qcow2-snapshot.c

@@ -139,6 +139,9 @@ static int qcow_write_snapshots(BlockDriverState *bs)
 
     snapshots_offset = qcow2_alloc_clusters(bs, snapshots_size);
     offset = snapshots_offset;
+    if (offset < 0) {
+        return offset;
+    }
 
     for(i = 0; i < s->nb_snapshots; i++) {
         sn = s->snapshots + i;
@@ -235,6 +238,7 @@ int qcow2_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info)
     QCowSnapshot *snapshots1, sn1, *sn = &sn1;
     int i, ret;
     uint64_t *l1_table = NULL;
+    int64_t l1_table_offset;
 
     memset(sn, 0, sizeof(*sn));
 
@@ -263,7 +267,12 @@ int qcow2_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info)
         goto fail;
 
     /* create the L1 table of the snapshot */
-    sn->l1_table_offset = qcow2_alloc_clusters(bs, s->l1_size * sizeof(uint64_t));
+    l1_table_offset = qcow2_alloc_clusters(bs, s->l1_size * sizeof(uint64_t));
+    if (l1_table_offset < 0) {
+        goto fail;
+    }
+
+    sn->l1_table_offset = l1_table_offset;
     sn->l1_size = s->l1_size;
 
     if (s->l1_size != 0) {

block/qcow2.c

@@ -467,8 +467,10 @@ static void qcow_aio_read_cb(void *opaque, int ret)
         acb->hd_aiocb = bdrv_aio_readv(s->hd,
                             (acb->cluster_offset >> 9) + index_in_cluster,
                             &acb->hd_qiov, acb->n, qcow_aio_read_cb, acb);
-        if (acb->hd_aiocb == NULL)
+        if (acb->hd_aiocb == NULL) {
+            ret = -EIO;
             goto done;
+        }
     }
 
     return;
@@ -561,7 +563,7 @@ static void qcow_aio_write_cb(void *opaque, int ret)
     acb->hd_aiocb = NULL;
 
     if (ret >= 0) {
-        ret = qcow2_alloc_cluster_link_l2(bs, acb->cluster_offset, &acb->l2meta);
+        ret = qcow2_alloc_cluster_link_l2(bs, &acb->l2meta);
     }
 
     run_dependent_requests(&acb->l2meta);
@@ -585,21 +587,23 @@ static void qcow_aio_write_cb(void *opaque, int ret)
         n_end > QCOW_MAX_CRYPT_CLUSTERS * s->cluster_sectors)
         n_end = QCOW_MAX_CRYPT_CLUSTERS * s->cluster_sectors;
 
-    acb->cluster_offset = qcow2_alloc_cluster_offset(bs, acb->sector_num << 9,
-                                          index_in_cluster,
-                                          n_end, &acb->n, &acb->l2meta);
+    ret = qcow2_alloc_cluster_offset(bs, acb->sector_num << 9,
+        index_in_cluster, n_end, &acb->n, &acb->l2meta);
+    if (ret < 0) {
+        goto done;
+    }
+
+    acb->cluster_offset = acb->l2meta.cluster_offset;
 
     /* Need to wait for another request? If so, we are done for now. */
-    if (!acb->cluster_offset && acb->l2meta.depends_on != NULL) {
+    if (acb->l2meta.nb_clusters == 0 && acb->l2meta.depends_on != NULL) {
         QLIST_INSERT_HEAD(&acb->l2meta.depends_on->dependent_requests,
             acb, next_depend);
         return;
     }
 
-    if (!acb->cluster_offset || (acb->cluster_offset & 511) != 0) {
-        ret = -EIO;
-        goto done;
-    }
+    assert((acb->cluster_offset & 511) == 0);
+
     if (s->crypt_method) {
         if (!acb->cluster_data) {
             acb->cluster_data = qemu_mallocz(QCOW_MAX_CRYPT_CLUSTERS *
@@ -618,11 +622,17 @@ static void qcow_aio_write_cb(void *opaque, int ret)
                                     (acb->cluster_offset >> 9) + index_in_cluster,
                                     &acb->hd_qiov, acb->n,
                                     qcow_aio_write_cb, acb);
-    if (acb->hd_aiocb == NULL)
-        goto done;
+    if (acb->hd_aiocb == NULL) {
+        ret = -EIO;
+        goto fail;
+    }
 
     return;
 
+fail:
+    if (acb->l2meta.nb_clusters != 0) {
+        QLIST_REMOVE(&acb->l2meta, next_in_flight);
+    }
 done:
     if (acb->qiov->niov > 1)
         qemu_vfree(acb->orig_buf);
@@ -683,27 +693,27 @@ static int get_bits_from_size(size_t size)
 static int preallocate(BlockDriverState *bs)
 {
     BDRVQcowState *s = bs->opaque;
-    uint64_t cluster_offset = 0;
     uint64_t nb_sectors;
     uint64_t offset;
     int num;
+    int ret;
     QCowL2Meta meta;
 
     nb_sectors = bdrv_getlength(bs) >> 9;
     offset = 0;
     QLIST_INIT(&meta.dependent_requests);
+    meta.cluster_offset = 0;
 
     while (nb_sectors) {
         num = MIN(nb_sectors, INT_MAX >> 9);
-        cluster_offset = qcow2_alloc_cluster_offset(bs, offset, 0, num, &num,
-            &meta);
+        ret = qcow2_alloc_cluster_offset(bs, offset, 0, num, &num, &meta);
 
-        if (cluster_offset == 0) {
+        if (ret < 0) {
             return -1;
         }
 
-        if (qcow2_alloc_cluster_link_l2(bs, cluster_offset, &meta) < 0) {
-            qcow2_free_any_clusters(bs, cluster_offset, meta.nb_clusters);
+        if (qcow2_alloc_cluster_link_l2(bs, &meta) < 0) {
+            qcow2_free_any_clusters(bs, meta.cluster_offset, meta.nb_clusters);
             return -1;
         }
 
@@ -722,10 +732,10 @@ static int preallocate(BlockDriverState *bs)
      * all of the allocated clusters (otherwise we get failing reads after
      * EOF). Extend the image to the last allocated sector.
      */
-    if (cluster_offset != 0) {
+    if (meta.cluster_offset != 0) {
         uint8_t buf[512];
         memset(buf, 0, 512);
-        bdrv_write(s->hd, (cluster_offset >> 9) + num - 1, buf, 1);
+        bdrv_write(s->hd, (meta.cluster_offset >> 9) + num - 1, buf, 1);
     }
 
     return 0;
@@ -1056,12 +1066,13 @@ static int qcow_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
 {
     BDRVQcowState *s = bs->opaque;
     int growable = bs->growable;
+    int ret;
 
     bs->growable = 1;
-    bdrv_pwrite(bs, qcow_vm_state_offset(s) + pos, buf, size);
+    ret = bdrv_pwrite(bs, qcow_vm_state_offset(s) + pos, buf, size);
     bs->growable = growable;
 
-    return size;
+    return ret;
 }
 
 static int qcow_load_vmstate(BlockDriverState *bs, uint8_t *buf,

block/qcow2.h

@@ -135,6 +135,7 @@ struct QCowAIOCB;
 typedef struct QCowL2Meta
 {
     uint64_t offset;
+    uint64_t cluster_offset;
     int n_start;
     int nb_available;
     int nb_clusters;
@@ -191,16 +192,13 @@ void qcow2_encrypt_sectors(BDRVQcowState *s, int64_t sector_num,
 
 uint64_t qcow2_get_cluster_offset(BlockDriverState *bs, uint64_t offset,
     int *num);
-uint64_t qcow2_alloc_cluster_offset(BlockDriverState *bs,
-                              uint64_t offset,
-                              int n_start, int n_end,
-                              int *num, QCowL2Meta *m);
+int qcow2_alloc_cluster_offset(BlockDriverState *bs, uint64_t offset,
+    int n_start, int n_end, int *num, QCowL2Meta *m);
 uint64_t qcow2_alloc_compressed_cluster_offset(BlockDriverState *bs,
                                          uint64_t offset,
                                          int compressed_size);
 
-int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, uint64_t cluster_offset,
-    QCowL2Meta *m);
+int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m);
 
 /* qcow2-snapshot.c functions */
 int qcow2_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info);

block/raw-posix.c

@@ -595,7 +595,7 @@ static void raw_close(BlockDriverState *bs)
         close(s->fd);
         s->fd = -1;
         if (s->aligned_buf != NULL)
-            qemu_free(s->aligned_buf);
+            qemu_vfree(s->aligned_buf);
     }
 }
 

block/vvfat.c

@@ -882,7 +882,7 @@ static int init_directories(BDRVVVFATState* s,
     mapping->dir_index = 0;
     mapping->info.dir.parent_mapping_index = -1;
     mapping->first_mapping_index = -1;
-    mapping->path = strdup(dirname);
+    mapping->path = qemu_strdup(dirname);
     i = strlen(mapping->path);
     if (i > 0 && mapping->path[i - 1] == '/')
 	mapping->path[i - 1] = '\0';
@@ -1632,10 +1632,10 @@ static uint32_t get_cluster_count_for_direntry(BDRVVVFATState* s,
 
 	    /* rename */
 	    if (strcmp(basename, basename2))
-		schedule_rename(s, cluster_num, strdup(path));
+		schedule_rename(s, cluster_num, qemu_strdup(path));
 	} else if (is_file(direntry))
 	    /* new file */
-	    schedule_new_file(s, strdup(path), cluster_num);
+	    schedule_new_file(s, qemu_strdup(path), cluster_num);
 	else {
 	    assert(0);
 	    return 0;
@@ -1752,10 +1752,10 @@ static int check_directory_consistency(BDRVVVFATState *s,
 	mapping->mode &= ~MODE_DELETED;
 
 	if (strcmp(basename, basename2))
-	    schedule_rename(s, cluster_num, strdup(path));
+	    schedule_rename(s, cluster_num, qemu_strdup(path));
     } else
 	/* new directory */
-	schedule_mkdir(s, cluster_num, strdup(path));
+	schedule_mkdir(s, cluster_num, qemu_strdup(path));
 
     lfn_init(&lfn);
     do {

check-qdict.c

@@ -205,6 +205,8 @@ START_TEST(qdict_put_exists_test)
 
     value = qdict_get_int(tests_dict, key);
     fail_unless(value == 2);
+
+    fail_unless(qdict_size(tests_dict) == 1);
 }
 END_TEST
 

configure

@@ -2652,3 +2652,6 @@ d=libuser
 mkdir -p $d
 rm -f $d/Makefile
 ln -s $source_path/Makefile.user $d/Makefile
+if test "$static" = "no" -a "$user_pie" = "yes" ; then
+  echo "QEMU_CFLAGS+=-fpie" > $d/config.mak
+fi

cpu-all.h

@@ -1017,7 +1017,8 @@ static inline int64_t cpu_get_real_ticks (void)
 #endif
 }
 
-#elif (defined(__mips_isa_rev) && __mips_isa_rev >= 2) || defined(__linux__)
+#elif defined(__mips__) && \
+      ((defined(__mips_isa_rev) && __mips_isa_rev >= 2) || defined(__linux__))
 /*
  * binutils wants to use rdhwr only on mips32r2
  * but as linux kernel emulate it, it's fine

cpu-defs.h

@@ -179,7 +179,7 @@ typedef struct CPUWatchpoint {
                                                                         \
     /* Core interrupt code */                                           \
     jmp_buf jmp_env;                                                    \
-    int32_t exception_index;                                            \
+    int exception_index;                                                \
                                                                         \
     CPUState *next_cpu; /* next CPU sharing TB cache */                 \
     int cpu_index; /* CPU index (informative) */                        \

cpu-exec.c

@@ -232,11 +232,13 @@ int cpu_exec(CPUState *env1)
 
     env_to_regs();
 #if defined(TARGET_I386)
-    /* put eflags in CPU temporary format */
-    CC_SRC = env->eflags & (CC_O | CC_S | CC_Z | CC_A | CC_P | CC_C);
-    DF = 1 - (2 * ((env->eflags >> 10) & 1));
-    CC_OP = CC_OP_EFLAGS;
-    env->eflags &= ~(DF_MASK | CC_O | CC_S | CC_Z | CC_A | CC_P | CC_C);
+    if (!kvm_enabled()) {
+        /* put eflags in CPU temporary format */
+        CC_SRC = env->eflags & (CC_O | CC_S | CC_Z | CC_A | CC_P | CC_C);
+        DF = 1 - (2 * ((env->eflags >> 10) & 1));
+        CC_OP = CC_OP_EFLAGS;
+        env->eflags &= ~(DF_MASK | CC_O | CC_S | CC_Z | CC_A | CC_P | CC_C);
+    }
 #elif defined(TARGET_SPARC)
 #elif defined(TARGET_M68K)
     env->cc_op = CC_OP_FLAGS;

default-configs/sh4-softmmu.mak

@@ -2,3 +2,4 @@
 
 CONFIG_USB_OHCI=y
 CONFIG_PTIMER=y
+CONFIG_ISA_MMIO=y

default-configs/sh4eb-softmmu.mak

@@ -2,3 +2,4 @@
 
 CONFIG_USB_OHCI=y
 CONFIG_PTIMER=y
+CONFIG_ISA_MMIO=y

dyngen-exec.h

@@ -69,9 +69,9 @@ extern int printf(const char *, ...);
 #define AREG1 "r14"
 #define AREG2 "r15"
 #elif defined(__mips__)
-#define AREG0 "fp"
-#define AREG1 "s0"
-#define AREG2 "s1"
+#define AREG0 "s0"
+#define AREG1 "s1"
+#define AREG2 "fp"
 #elif defined(__sparc__)
 #ifdef CONFIG_SOLARIS
 #define AREG0 "g2"

exec.c

@@ -3307,7 +3307,7 @@ void cpu_physical_memory_unmap(void *buffer, target_phys_addr_t len,
     if (is_write) {
         cpu_physical_memory_write(bounce.addr, bounce.buffer, access_len);
     }
-    qemu_free(bounce.buffer);
+    qemu_vfree(bounce.buffer);
     bounce.buffer = NULL;
     cpu_notify_map_clients();
 }

host-utils.h

@@ -164,7 +164,7 @@ static inline int ctz64(uint64_t val)
 {
 #if QEMU_GNUC_PREREQ(3, 4)
     if (val)
-        return __builtin_ctz(val);
+        return __builtin_ctzll(val);
     else
         return 64;
 #else

hw/boards.h

@@ -22,7 +22,10 @@ typedef struct QEMUMachine {
     int no_serial:1,
         no_parallel:1,
         use_virtcon:1,
-        no_vga:1;
+        no_vga:1,
+        no_floppy:1,
+        no_cdrom:1,
+        no_sdcard:1;
     int is_default;
     GlobalProperty *compat_props;
     struct QEMUMachine *next;

hw/cirrus_vga.c

@@ -2585,9 +2585,11 @@ static void map_linear_vram(CirrusVGAState *s)
 
 static void unmap_linear_vram(CirrusVGAState *s)
 {
-    if (s->vga.map_addr && s->vga.lfb_addr && s->vga.lfb_end)
+    if (s->vga.map_addr && s->vga.lfb_addr && s->vga.lfb_end) {
         s->vga.map_addr = s->vga.map_end = 0;
-
+         cpu_register_physical_memory(s->vga.lfb_addr, s->vga.vram_size,
+                                      s->cirrus_linear_io_addr);
+    }
     cpu_register_physical_memory(isa_mem_base + 0xa0000, 0x20000,
                                  s->vga.vga_io_memory);
 }
@@ -3209,9 +3211,6 @@ static int pci_cirrus_vga_initfn(PCIDevice *dev)
          pci_register_bar((PCIDevice *)d, 1, CIRRUS_PNPMMIO_SIZE,
                           PCI_BASE_ADDRESS_SPACE_MEMORY, cirrus_pci_mmio_map);
      }
-
-     /* ROM BIOS */
-     rom_add_vga(VGABIOS_CIRRUS_FILENAME);
      return 0;
 }
 
@@ -3226,6 +3225,7 @@ static PCIDeviceInfo cirrus_vga_info = {
     .qdev.size    = sizeof(PCICirrusVGAState),
     .qdev.vmsd    = &vmstate_pci_cirrus_vga,
     .init         = pci_cirrus_vga_initfn,
+    .romfile      = VGABIOS_CIRRUS_FILENAME,
     .config_write = pci_cirrus_write_config,
 };
 

hw/e1000.c

@@ -1089,7 +1089,6 @@ static int pci_e1000_init(PCIDevice *pci_dev)
 
     pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
     pci_config_set_device_id(pci_conf, E1000_DEVID);
-    *(uint16_t *)(pci_conf+0x04) = cpu_to_le16(0x0407);
     *(uint16_t *)(pci_conf+0x06) = cpu_to_le16(0x0010);
     pci_conf[0x08] = 0x03;
     pci_config_set_class(pci_conf, PCI_CLASS_NETWORK_ETHERNET);
@@ -1121,14 +1120,6 @@ static int pci_e1000_init(PCIDevice *pci_dev)
                           d->dev.qdev.info->name, d->dev.qdev.id, d);
 
     qemu_format_nic_info_str(&d->nic->nc, macaddr);
-
-    if (!pci_dev->qdev.hotplugged) {
-        static int loaded = 0;
-        if (!loaded) {
-            rom_add_option("pxe-e1000.bin");
-            loaded = 1;
-        }
-    }
     return 0;
 }
 
@@ -1146,6 +1137,7 @@ static PCIDeviceInfo e1000_info = {
     .qdev.vmsd  = &vmstate_e1000,
     .init       = pci_e1000_init,
     .exit       = pci_e1000_uninit,
+    .romfile    = "pxe-e1000.bin",
     .qdev.props = (Property[]) {
         DEFINE_NIC_PROPERTIES(E1000State, conf),
         DEFINE_PROP_END_OF_LIST(),

hw/fdc.c

@@ -661,7 +661,7 @@ static int fdc_post_load(void *opaque, int version_id)
 }
 
 static const VMStateDescription vmstate_fdc = {
-    .name = "fdctrl",
+    .name = "fdc",
     .version_id = 2,
     .minimum_version_id = 2,
     .minimum_version_id_old = 2,
@@ -699,31 +699,6 @@ static const VMStateDescription vmstate_fdc = {
     }
 };
 
-static const VMStateDescription vmstate_fdc_isa = {
-    .name = "fdc",
-    .version_id = 2,
-    .minimum_version_id = 2,
-    .minimum_version_id_old = 2,
-    .fields      = (VMStateField []) {
-        /* Controller State */
-        VMSTATE_STRUCT(state, fdctrl_isabus_t, 0, vmstate_fdc, fdctrl_t),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
-static const VMStateDescription vmstate_fdc_sysbus = {
-    .name = "fdc",
-    .version_id = 2,
-    .minimum_version_id = 2,
-    .minimum_version_id_old = 2,
-    .fields      = (VMStateField []) {
-        /* Controller State */
-        VMSTATE_STRUCT(state, fdctrl_sysbus_t, 0, vmstate_fdc, fdctrl_t),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
-
 static void fdctrl_external_reset_sysbus(DeviceState *d)
 {
     fdctrl_sysbus_t *sys = container_of(d, fdctrl_sysbus_t, busdev.qdev);
@@ -960,6 +935,12 @@ static uint32_t fdctrl_read_main_status (fdctrl_t *fdctrl)
     fdctrl->dsr &= ~FD_DSR_PWRDOWN;
     fdctrl->dor |= FD_DOR_nRESET;
 
+    /* Sparc mutation */
+    if (fdctrl->sun4m) {
+        retval |= FD_MSR_DIO;
+        fdctrl_reset_irq(fdctrl);
+    };
+
     FLOPPY_DPRINTF("main status register: 0x%02x\n", retval);
 
     return retval;
@@ -1879,8 +1860,12 @@ fdctrl_t *fdctrl_init_isa(DriveInfo **fds)
     ISADevice *dev;
 
     dev = isa_create("isa-fdc");
-    qdev_prop_set_drive(&dev->qdev, "driveA", fds[0]);
-    qdev_prop_set_drive(&dev->qdev, "driveB", fds[1]);
+    if (fds[0]) {
+        qdev_prop_set_drive(&dev->qdev, "driveA", fds[0]);
+    }
+    if (fds[1]) {
+        qdev_prop_set_drive(&dev->qdev, "driveB", fds[1]);
+    }
     if (qdev_init(&dev->qdev) < 0)
         return NULL;
     return &(DO_UPCAST(fdctrl_isabus_t, busdev, dev)->state);
@@ -1898,8 +1883,12 @@ fdctrl_t *fdctrl_init_sysbus(qemu_irq irq, int dma_chann,
     sys = DO_UPCAST(fdctrl_sysbus_t, busdev.qdev, dev);
     fdctrl = &sys->state;
     fdctrl->dma_chann = dma_chann; /* FIXME */
-    qdev_prop_set_drive(dev, "driveA", fds[0]);
-    qdev_prop_set_drive(dev, "driveB", fds[1]);
+    if (fds[0]) {
+        qdev_prop_set_drive(dev, "driveA", fds[0]);
+    }
+    if (fds[1]) {
+        qdev_prop_set_drive(dev, "driveB", fds[1]);
+    }
     qdev_init_nofail(dev);
     sysbus_connect_irq(&sys->busdev, 0, irq);
     sysbus_mmio_map(&sys->busdev, 0, mmio_base);
@@ -1915,7 +1904,9 @@ fdctrl_t *sun4m_fdctrl_init (qemu_irq irq, target_phys_addr_t io_base,
     fdctrl_t *fdctrl;
 
     dev = qdev_create(NULL, "SUNW,fdtwo");
-    qdev_prop_set_drive(dev, "drive", fds[0]);
+    if (fds[0]) {
+        qdev_prop_set_drive(dev, "drive", fds[0]);
+    }
     qdev_init_nofail(dev);
     sys = DO_UPCAST(fdctrl_sysbus_t, busdev.qdev, dev);
     fdctrl = &sys->state;
@@ -1926,7 +1917,7 @@ fdctrl_t *sun4m_fdctrl_init (qemu_irq irq, target_phys_addr_t io_base,
     return fdctrl;
 }
 
-static int fdctrl_init_common(fdctrl_t *fdctrl)
+static int fdctrl_init_common(fdctrl_t *fdctrl, target_phys_addr_t io_base)
 {
     int i, j;
     static int command_tables_inited = 0;
@@ -1957,6 +1948,7 @@ static int fdctrl_init_common(fdctrl_t *fdctrl)
         DMA_register_channel(fdctrl->dma_chann, &fdctrl_transfer_handler, fdctrl);
     fdctrl_connect_drives(fdctrl);
 
+    vmstate_register(io_base, &vmstate_fdc, fdctrl);
     return 0;
 }
 
@@ -1980,7 +1972,7 @@ static int isabus_fdc_init1(ISADevice *dev)
     isa_init_irq(&isa->busdev, &fdctrl->irq, isairq);
     fdctrl->dma_chann = dma_chann;
 
-    ret = fdctrl_init_common(fdctrl);
+    ret = fdctrl_init_common(fdctrl, iobase);
 
     return ret;
 }
@@ -1998,7 +1990,7 @@ static int sysbus_fdc_init1(SysBusDevice *dev)
     qdev_init_gpio_in(&dev->qdev, fdctrl_handle_tc, 1);
     fdctrl->dma_chann = -1;
 
-    ret = fdctrl_init_common(fdctrl);
+    ret = fdctrl_init_common(fdctrl, io);
 
     return ret;
 }
@@ -2015,7 +2007,7 @@ static int sun4m_fdc_init1(SysBusDevice *dev)
     qdev_init_gpio_in(&dev->qdev, fdctrl_handle_tc, 1);
 
     fdctrl->sun4m = 1;
-    return fdctrl_init_common(fdctrl);
+    return fdctrl_init_common(fdctrl, io);
 }
 
 static ISADeviceInfo isa_fdc_info = {
@@ -2023,7 +2015,6 @@ static ISADeviceInfo isa_fdc_info = {
     .qdev.name  = "isa-fdc",
     .qdev.size  = sizeof(fdctrl_isabus_t),
     .qdev.no_user = 1,
-    .qdev.vmsd  = &vmstate_fdc_isa,
     .qdev.reset = fdctrl_external_reset_isa,
     .qdev.props = (Property[]) {
         DEFINE_PROP_DRIVE("driveA", fdctrl_isabus_t, state.drives[0].dinfo),
@@ -2036,7 +2027,6 @@ static SysBusDeviceInfo sysbus_fdc_info = {
     .init = sysbus_fdc_init1,
     .qdev.name  = "sysbus-fdc",
     .qdev.size  = sizeof(fdctrl_sysbus_t),
-    .qdev.vmsd  = &vmstate_fdc_sysbus,
     .qdev.reset = fdctrl_external_reset_sysbus,
     .qdev.props = (Property[]) {
         DEFINE_PROP_DRIVE("driveA", fdctrl_sysbus_t, state.drives[0].dinfo),
@@ -2049,7 +2039,6 @@ static SysBusDeviceInfo sun4m_fdc_info = {
     .init = sun4m_fdc_init1,
     .qdev.name  = "SUNW,fdtwo",
     .qdev.size  = sizeof(fdctrl_sysbus_t),
-    .qdev.vmsd  = &vmstate_fdc_sysbus,
     .qdev.reset = fdctrl_external_reset_sysbus,
     .qdev.props = (Property[]) {
         DEFINE_PROP_DRIVE("drive", fdctrl_sysbus_t, state.drives[0].dinfo),

hw/fw_cfg.c

@@ -45,11 +45,12 @@ typedef struct _FWCfgEntry {
     FWCfgCallback callback;
 } FWCfgEntry;
 
-typedef struct _FWCfgState {
+struct _FWCfgState {
     FWCfgEntry entries[2][FW_CFG_MAX_ENTRY];
+    FWCfgFiles *files;
     uint16_t cur_entry;
     uint32_t cur_offset;
-} FWCfgState;
+};
 
 static void fw_cfg_write(FWCfgState *s, uint8_t value)
 {
@@ -178,7 +179,7 @@ static int get_uint32_as_uint16(QEMUFile *f, void *pv, size_t size)
 
 static void put_unused(QEMUFile *f, void *pv, size_t size)
 {
-    fprintf(stderr, "uint32_as_uint16 is only used for backward compatibilty.\n");
+    fprintf(stderr, "uint32_as_uint16 is only used for backward compatibility.\n");
     fprintf(stderr, "This functions shouldn't be called.\n");
 }
 
@@ -210,9 +211,8 @@ static const VMStateDescription vmstate_fw_cfg = {
     }
 };
 
-int fw_cfg_add_bytes(void *opaque, uint16_t key, uint8_t *data, uint32_t len)
+int fw_cfg_add_bytes(FWCfgState *s, uint16_t key, uint8_t *data, uint32_t len)
 {
-    FWCfgState *s = opaque;
     int arch = !!(key & FW_CFG_ARCH_LOCAL);
 
     key &= FW_CFG_ENTRY_MASK;
@@ -226,37 +226,36 @@ int fw_cfg_add_bytes(void *opaque, uint16_t key, uint8_t *data, uint32_t len)
     return 1;
 }
 
-int fw_cfg_add_i16(void *opaque, uint16_t key, uint16_t value)
+int fw_cfg_add_i16(FWCfgState *s, uint16_t key, uint16_t value)
 {
     uint16_t *copy;
 
     copy = qemu_malloc(sizeof(value));
     *copy = cpu_to_le16(value);
-    return fw_cfg_add_bytes(opaque, key, (uint8_t *)copy, sizeof(value));
+    return fw_cfg_add_bytes(s, key, (uint8_t *)copy, sizeof(value));
 }
 
-int fw_cfg_add_i32(void *opaque, uint16_t key, uint32_t value)
+int fw_cfg_add_i32(FWCfgState *s, uint16_t key, uint32_t value)
 {
     uint32_t *copy;
 
     copy = qemu_malloc(sizeof(value));
     *copy = cpu_to_le32(value);
-    return fw_cfg_add_bytes(opaque, key, (uint8_t *)copy, sizeof(value));
+    return fw_cfg_add_bytes(s, key, (uint8_t *)copy, sizeof(value));
 }
 
-int fw_cfg_add_i64(void *opaque, uint16_t key, uint64_t value)
+int fw_cfg_add_i64(FWCfgState *s, uint16_t key, uint64_t value)
 {
     uint64_t *copy;
 
     copy = qemu_malloc(sizeof(value));
     *copy = cpu_to_le64(value);
-    return fw_cfg_add_bytes(opaque, key, (uint8_t *)copy, sizeof(value));
+    return fw_cfg_add_bytes(s, key, (uint8_t *)copy, sizeof(value));
 }
 
-int fw_cfg_add_callback(void *opaque, uint16_t key, FWCfgCallback callback,
+int fw_cfg_add_callback(FWCfgState *s, uint16_t key, FWCfgCallback callback,
                         void *callback_opaque, uint8_t *data, size_t len)
 {
-    FWCfgState *s = opaque;
     int arch = !!(key & FW_CFG_ARCH_LOCAL);
 
     if (!(key & FW_CFG_WRITE_CHANNEL))
@@ -275,8 +274,54 @@ int fw_cfg_add_callback(void *opaque, uint16_t key, FWCfgCallback callback,
     return 1;
 }
 
-void *fw_cfg_init(uint32_t ctl_port, uint32_t data_port,
-		target_phys_addr_t ctl_addr, target_phys_addr_t data_addr)
+int fw_cfg_add_file(FWCfgState *s,  const char *dir, const char *filename,
+                    uint8_t *data, uint32_t len)
+{
+    const char *basename;
+    int i, index;
+
+    if (!s->files) {
+        int dsize = sizeof(uint32_t) + sizeof(FWCfgFile) * FW_CFG_FILE_SLOTS;
+        s->files = qemu_mallocz(dsize);
+        fw_cfg_add_bytes(s, FW_CFG_FILE_DIR, (uint8_t*)s->files, dsize);
+    }
+
+    index = be32_to_cpu(s->files->count);
+    if (index == FW_CFG_FILE_SLOTS) {
+        fprintf(stderr, "fw_cfg: out of file slots\n");
+        return 0;
+    }
+
+    fw_cfg_add_bytes(s, FW_CFG_FILE_FIRST + index, data, len);
+
+    basename = strrchr(filename, '/');
+    if (basename) {
+        basename++;
+    } else {
+        basename = filename;
+    }
+
+    snprintf(s->files->f[index].name, sizeof(s->files->f[index].name),
+             "%s/%s", dir, basename);
+    for (i = 0; i < index; i++) {
+        if (strcmp(s->files->f[index].name, s->files->f[i].name) == 0) {
+            FW_CFG_DPRINTF("%s: skip duplicate: %s\n", __FUNCTION__,
+                           s->files->f[index].name);
+            return 1;
+        }
+    }
+
+    s->files->f[index].size   = cpu_to_be32(len);
+    s->files->f[index].select = cpu_to_be16(FW_CFG_FILE_FIRST + index);
+    FW_CFG_DPRINTF("%s: #%d: %s (%d bytes)\n", __FUNCTION__,
+                   index, s->files->f[index].name, len);
+
+    s->files->count = cpu_to_be32(index+1);
+    return 1;
+}
+
+FWCfgState *fw_cfg_init(uint32_t ctl_port, uint32_t data_port,
+                        target_phys_addr_t ctl_addr, target_phys_addr_t data_addr)
 {
     FWCfgState *s;
     int io_ctl_memory, io_data_memory;

hw/fw_cfg.h

@@ -26,7 +26,11 @@
 #define FW_CFG_SETUP_ADDR       0x16
 #define FW_CFG_SETUP_SIZE       0x17
 #define FW_CFG_SETUP_DATA       0x18
-#define FW_CFG_MAX_ENTRY        0x19
+#define FW_CFG_FILE_DIR         0x19
+
+#define FW_CFG_FILE_FIRST       0x20
+#define FW_CFG_FILE_SLOTS       0x10
+#define FW_CFG_MAX_ENTRY        (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS)
 
 #define FW_CFG_WRITE_CHANNEL    0x4000
 #define FW_CFG_ARCH_LOCAL       0x8000
@@ -35,16 +39,31 @@
 #define FW_CFG_INVALID          0xffff
 
 #ifndef NO_QEMU_PROTOS
+typedef struct FWCfgFile {
+    uint32_t  size;        /* file size */
+    uint16_t  select;      /* write this to 0x510 to read it */
+    uint16_t  reserved;
+    char      name[56];
+} FWCfgFile;
+
+typedef struct FWCfgFiles {
+    uint32_t  count;
+    FWCfgFile f[];
+} FWCfgFiles;
+
 typedef void (*FWCfgCallback)(void *opaque, uint8_t *data);
 
-int fw_cfg_add_bytes(void *opaque, uint16_t key, uint8_t *data, uint32_t len);
-int fw_cfg_add_i16(void *opaque, uint16_t key, uint16_t value);
-int fw_cfg_add_i32(void *opaque, uint16_t key, uint32_t value);
-int fw_cfg_add_i64(void *opaque, uint16_t key, uint64_t value);
-int fw_cfg_add_callback(void *opaque, uint16_t key, FWCfgCallback callback,
+typedef struct _FWCfgState FWCfgState;
+int fw_cfg_add_bytes(FWCfgState *s, uint16_t key, uint8_t *data, uint32_t len);
+int fw_cfg_add_i16(FWCfgState *s, uint16_t key, uint16_t value);
+int fw_cfg_add_i32(FWCfgState *s, uint16_t key, uint32_t value);
+int fw_cfg_add_i64(FWCfgState *s, uint16_t key, uint64_t value);
+int fw_cfg_add_callback(FWCfgState *s, uint16_t key, FWCfgCallback callback,
                         void *callback_opaque, uint8_t *data, size_t len);
-void *fw_cfg_init(uint32_t ctl_port, uint32_t data_port,
-		target_phys_addr_t crl_addr, target_phys_addr_t data_addr);
+int fw_cfg_add_file(FWCfgState *s, const char *dir, const char *filename,
+                    uint8_t *data, uint32_t len);
+FWCfgState *fw_cfg_init(uint32_t ctl_port, uint32_t data_port,
+                        target_phys_addr_t crl_addr, target_phys_addr_t data_addr);
 
 #endif /* NO_QEMU_PROTOS */
 

hw/ide/cmd646.c

@@ -70,11 +70,7 @@ static void ide_map(PCIDevice *pci_dev, int region_num,
 
 static PCIIDEState *pci_from_bm(BMDMAState *bm)
 {
-    if (bm->unit == 0) {
-        return container_of(bm, PCIIDEState, bmdma[0]);
-    } else {
-        return container_of(bm, PCIIDEState, bmdma[1]);
-    }
+    return bm->pci_dev;
 }
 
 static uint32_t bmdma_readb(void *opaque, uint32_t addr)
@@ -145,6 +141,7 @@ static void bmdma_map(PCIDevice *pci_dev, int region_num,
         BMDMAState *bm = &d->bmdma[i];
         d->bus[i].bmdma = bm;
         bm->bus = d->bus+i;
+        bm->pci_dev = d;
         qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
 
         register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);

hw/ide/core.c

@@ -115,7 +115,7 @@ static void ide_identify(IDEState *s)
     put_le16(p + 20, 3); /* XXX: retired, remove ? */
     put_le16(p + 21, 512); /* cache size in sectors */
     put_le16(p + 22, 4); /* ecc bytes */
-    padstr((char *)(p + 23), QEMU_VERSION, 8); /* firmware version */
+    padstr((char *)(p + 23), s->version, 8); /* firmware version */
     padstr((char *)(p + 27), "QEMU HARDDISK", 40); /* model */
 #if MAX_MULT_SECTORS > 1
     put_le16(p + 47, 0x8000 | MAX_MULT_SECTORS);
@@ -186,7 +186,7 @@ static void ide_atapi_identify(IDEState *s)
     put_le16(p + 20, 3); /* buffer type */
     put_le16(p + 21, 512); /* cache size in sectors */
     put_le16(p + 22, 4); /* ecc bytes */
-    padstr((char *)(p + 23), QEMU_VERSION, 8); /* firmware version */
+    padstr((char *)(p + 23), s->version, 8); /* firmware version */
     padstr((char *)(p + 27), "QEMU DVD-ROM", 40); /* model */
     put_le16(p + 48, 1); /* dword I/O (XXX: should not be set on CDROM) */
 #ifdef USE_DMA_CDROM
@@ -238,7 +238,7 @@ static void ide_cfata_identify(IDEState *s)
     put_le16(p + 8, s->nb_sectors);		/* Sectors per card */
     padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */
     put_le16(p + 22, 0x0004);			/* ECC bytes */
-    padstr((char *) (p + 23), QEMU_VERSION, 8);	/* Firmware Revision */
+    padstr((char *) (p + 23), s->version, 8);	/* Firmware Revision */
     padstr((char *) (p + 27), "QEMU MICRODRIVE", 40);/* Model number */
 #if MAX_MULT_SECTORS > 1
     put_le16(p + 47, 0x8000 | MAX_MULT_SECTORS);
@@ -1591,7 +1591,7 @@ static void ide_atapi_cmd(IDEState *s)
         buf[7] = 0; /* reserved */
         padstr8(buf + 8, 8, "QEMU");
         padstr8(buf + 16, 16, "QEMU DVD-ROM");
-        padstr8(buf + 32, 4, QEMU_VERSION);
+        padstr8(buf + 32, 4, s->version);
         ide_atapi_cmd_reply(s, 36, max_len);
         break;
     case GPCMD_GET_CONFIGURATION:
@@ -2590,7 +2590,7 @@ void ide_bus_reset(IDEBus *bus)
     ide_clear_hob(bus);
 }
 
-void ide_init_drive(IDEState *s, DriveInfo *dinfo)
+void ide_init_drive(IDEState *s, DriveInfo *dinfo, const char *version)
 {
     int cylinders, heads, secs;
     uint64_t nb_sectors;
@@ -2619,6 +2619,11 @@ void ide_init_drive(IDEState *s, DriveInfo *dinfo)
     if (strlen(s->drive_serial_str) == 0)
         snprintf(s->drive_serial_str, sizeof(s->drive_serial_str),
                  "QM%05d", s->drive_serial);
+    if (version) {
+        pstrcpy(s->version, sizeof(s->version), version);
+    } else {
+        pstrcpy(s->version, sizeof(s->version), QEMU_VERSION);
+    }
     ide_reset(s);
 }
 
@@ -2635,13 +2640,14 @@ void ide_init2(IDEBus *bus, DriveInfo *hd0, DriveInfo *hd1,
         s->unit = i;
         s->drive_serial = drive_serial++;
         s->io_buffer = qemu_blockalign(s->bs, IDE_DMA_BUF_SECTORS*512 + 4);
+        s->io_buffer_total_len = IDE_DMA_BUF_SECTORS*512 + 4;
         s->smart_selftest_data = qemu_blockalign(s->bs, 512);
         s->sector_write_timer = qemu_new_timer(vm_clock,
                                                ide_sector_write_timer_cb, s);
         if (i == 0)
-            ide_init_drive(s, hd0);
+            ide_init_drive(s, hd0, NULL);
         if (i == 1)
-            ide_init_drive(s, hd1);
+            ide_init_drive(s, hd1, NULL);
     }
     bus->irq = irq;
 }
@@ -2669,6 +2675,25 @@ static bool is_identify_set(void *opaque, int version_id)
     return s->identify_set != 0;
 }
 
+static EndTransferFunc* transfer_end_table[] = {
+        ide_sector_read,
+        ide_sector_write,
+        ide_transfer_stop,
+        ide_atapi_cmd_reply_end,
+        ide_atapi_cmd,
+};
+
+static int transfer_end_table_idx(EndTransferFunc *fn)
+{
+    int i;
+
+    for (i = 0; i < ARRAY_SIZE(transfer_end_table); i++)
+        if (transfer_end_table[i] == fn)
+            return i;
+
+    return -1;
+}
+
 static int ide_drive_post_load(void *opaque, int version_id)
 {
     IDEState *s = opaque;
@@ -2679,14 +2704,42 @@ static int ide_drive_post_load(void *opaque, int version_id)
             s->cdrom_changed = 1;
         }
     }
+
+    if (s->cur_io_buffer_len) {
+        s->end_transfer_func = transfer_end_table[s->end_transfer_fn_idx];
+        s->data_ptr = s->io_buffer + s->cur_io_buffer_offset;
+        s->data_end = s->data_ptr + s->cur_io_buffer_len;
+    }
+        
     return 0;
 }
 
+static void ide_drive_pre_save(void *opaque)
+{
+    IDEState *s = opaque;
+
+    s->cur_io_buffer_len = 0;
+
+    if (!(s->status & DRQ_STAT))
+        return;
+
+    s->cur_io_buffer_offset = s->data_ptr - s->io_buffer;
+    s->cur_io_buffer_len = s->data_end - s->data_ptr;
+
+    s->end_transfer_fn_idx = transfer_end_table_idx(s->end_transfer_func);
+    if (s->end_transfer_fn_idx == -1) {
+        fprintf(stderr, "%s: invalid end_transfer_func for DRQ_STAT\n",
+                        __func__);
+        s->end_transfer_fn_idx = 2;
+    }
+}
+
 const VMStateDescription vmstate_ide_drive = {
     .name = "ide_drive",
-    .version_id = 3,
+    .version_id = 4,
     .minimum_version_id = 0,
     .minimum_version_id_old = 0,
+    .pre_save = ide_drive_pre_save,
     .post_load = ide_drive_post_load,
     .fields      = (VMStateField []) {
         VMSTATE_INT32(mult_sectors, IDEState),
@@ -2709,7 +2762,14 @@ const VMStateDescription vmstate_ide_drive = {
         VMSTATE_UINT8(sense_key, IDEState),
         VMSTATE_UINT8(asc, IDEState),
         VMSTATE_UINT8_V(cdrom_changed, IDEState, 3),
-        /* XXX: if a transfer is pending, we do not save it yet */
+        VMSTATE_INT32_V(req_nb_sectors, IDEState, 4),
+        VMSTATE_VARRAY_INT32(io_buffer, IDEState, io_buffer_total_len, 4,
+			     vmstate_info_uint8, uint8_t),
+        VMSTATE_INT32_V(cur_io_buffer_offset, IDEState, 4),
+        VMSTATE_INT32_V(cur_io_buffer_len, IDEState, 4),
+        VMSTATE_UINT8_V(end_transfer_fn_idx, IDEState, 4),
+        VMSTATE_INT32_V(elementary_transfer_size, IDEState, 4),
+        VMSTATE_INT32_V(packet_transfer_size, IDEState, 4),
         VMSTATE_END_OF_LIST()
     }
 };

hw/ide/internal.h

@@ -397,6 +397,7 @@ struct IDEState {
     /* set for lba48 access */
     uint8_t lba48;
     BlockDriverState *bs;
+    char version[9];
     /* ATAPI specific */
     uint8_t sense_key;
     uint8_t asc;
@@ -416,6 +417,11 @@ struct IDEState {
     uint8_t *data_ptr;
     uint8_t *data_end;
     uint8_t *io_buffer;
+    /* PIO save/restore */
+    int32_t io_buffer_total_len;
+    int cur_io_buffer_offset;
+    int cur_io_buffer_len;
+    uint8_t end_transfer_fn_idx;
     QEMUTimer *sector_write_timer; /* only used for win2k install hack */
     uint32_t irq_count; /* counts IRQs when using win2k install hack */
     /* CF-ATA extended error */
@@ -449,6 +455,7 @@ struct IDEDevice {
     DeviceState qdev;
     uint32_t unit;
     DriveInfo *dinfo;
+    char *version;
 };
 
 typedef int (*ide_qdev_initfn)(IDEDevice *dev);
@@ -474,6 +481,7 @@ struct BMDMAState {
     uint8_t status;
     uint32_t addr;
 
+    struct PCIIDEState *pci_dev;
     IDEBus *bus;
     /* current transfer state */
     uint32_t cur_addr;
@@ -548,7 +556,7 @@ uint32_t ide_data_readw(void *opaque, uint32_t addr);
 void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
 uint32_t ide_data_readl(void *opaque, uint32_t addr);
 
-void ide_init_drive(IDEState *s, DriveInfo *dinfo);
+void ide_init_drive(IDEState *s, DriveInfo *dinfo, const char *version);
 void ide_init2(IDEBus *bus, DriveInfo *hd0, DriveInfo *hd1,
                qemu_irq irq);
 void ide_init_ioport(IDEBus *bus, int iobase, int iobase2);

hw/ide/piix.c

@@ -78,6 +78,7 @@ static void bmdma_map(PCIDevice *pci_dev, int region_num,
         BMDMAState *bm = &d->bmdma[i];
         d->bus[i].bmdma = bm;
         bm->bus = d->bus+i;
+        bm->pci_dev = d;
         qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
 
         register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);

hw/ide/qdev.c

@@ -99,7 +99,7 @@ typedef struct IDEDrive {
 static int ide_drive_initfn(IDEDevice *dev)
 {
     IDEBus *bus = DO_UPCAST(IDEBus, qbus, dev->qdev.parent_bus);
-    ide_init_drive(bus->ifs + dev->unit, dev->dinfo);
+    ide_init_drive(bus->ifs + dev->unit, dev->dinfo, dev->version);
     return 0;
 }
 
@@ -110,6 +110,7 @@ static IDEDeviceInfo ide_drive_info = {
     .qdev.props = (Property[]) {
         DEFINE_PROP_UINT32("unit", IDEDrive, dev.unit, -1),
         DEFINE_PROP_DRIVE("drive", IDEDrive, dev.dinfo),
+        DEFINE_PROP_STRING("ver",  IDEDrive, dev.version),
         DEFINE_PROP_END_OF_LIST(),
     }
 };

hw/loader.c

@@ -48,6 +48,7 @@
 #include "sysemu.h"
 #include "uboot_image.h"
 #include "loader.h"
+#include "fw_cfg.h"
 
 #include <zlib.h>
 
@@ -526,15 +527,15 @@ struct Rom {
     char *path;
     size_t romsize;
     uint8_t *data;
-    int align;
     int isrom;
+    char *fw_dir;
+    char *fw_file;
 
-    target_phys_addr_t min;
-    target_phys_addr_t max;
     target_phys_addr_t addr;
     QTAILQ_ENTRY(Rom) next;
 };
 
+static FWCfgState *fw_cfg;
 static QTAILQ_HEAD(, Rom) roms = QTAILQ_HEAD_INITIALIZER(roms);
 int rom_enable_driver_roms;
 
@@ -548,7 +549,7 @@ static void rom_insert(Rom *rom)
 
     /* list is ordered by load address */
     QTAILQ_FOREACH(item, &roms, next) {
-        if (rom->min >= item->min)
+        if (rom->addr >= item->addr)
             continue;
         QTAILQ_INSERT_BEFORE(item, rom, next);
         return;
@@ -556,8 +557,8 @@ static void rom_insert(Rom *rom)
     QTAILQ_INSERT_TAIL(&roms, rom, next);
 }
 
-int rom_add_file(const char *file,
-                 target_phys_addr_t min, target_phys_addr_t max, int align)
+int rom_add_file(const char *file, const char *fw_dir,
+                 target_phys_addr_t addr)
 {
     Rom *rom;
     int rc, fd = -1;
@@ -576,9 +577,11 @@ int rom_add_file(const char *file,
         goto err;
     }
 
-    rom->align   = align;
-    rom->min     = min;
-    rom->max     = max;
+    if (fw_dir) {
+        rom->fw_dir  = qemu_strdup(fw_dir);
+        rom->fw_file = qemu_strdup(file);
+    }
+    rom->addr    = addr;
     rom->romsize = lseek(fd, 0, SEEK_END);
     rom->data    = qemu_mallocz(rom->romsize);
     lseek(fd, 0, SEEK_SET);
@@ -590,6 +593,8 @@ int rom_add_file(const char *file,
     }
     close(fd);
     rom_insert(rom);
+    if (rom->fw_file && fw_cfg)
+        fw_cfg_add_file(fw_cfg, rom->fw_dir, rom->fw_file, rom->data, rom->romsize);
     return 0;
 
 err:
@@ -603,15 +608,13 @@ err:
 }
 
 int rom_add_blob(const char *name, const void *blob, size_t len,
-                 target_phys_addr_t min, target_phys_addr_t max, int align)
+                 target_phys_addr_t addr)
 {
     Rom *rom;
 
     rom = qemu_mallocz(sizeof(*rom));
     rom->name    = qemu_strdup(name);
-    rom->align   = align;
-    rom->min     = min;
-    rom->max     = max;
+    rom->addr    = addr;
     rom->romsize = len;
     rom->data    = qemu_mallocz(rom->romsize);
     memcpy(rom->data, blob, len);
@@ -623,14 +626,14 @@ int rom_add_vga(const char *file)
 {
     if (!rom_enable_driver_roms)
         return 0;
-    return rom_add_file(file, PC_ROM_MIN_VGA, PC_ROM_MAX, PC_ROM_ALIGN);
+    return rom_add_file(file, "vgaroms", 0);
 }
 
 int rom_add_option(const char *file)
 {
     if (!rom_enable_driver_roms)
         return 0;
-    return rom_add_file(file, PC_ROM_MIN_OPTION, PC_ROM_MAX, PC_ROM_ALIGN);
+    return rom_add_file(file, "genroms", 0);
 }
 
 static void rom_reset(void *unused)
@@ -638,8 +641,12 @@ static void rom_reset(void *unused)
     Rom *rom;
 
     QTAILQ_FOREACH(rom, &roms, next) {
-        if (rom->data == NULL)
+        if (rom->fw_file) {
             continue;
+        }
+        if (rom->data == NULL) {
+            continue;
+        }
         cpu_physical_memory_write_rom(rom->addr, rom->data, rom->romsize);
         if (rom->isrom) {
             /* rom needs to be written only once */
@@ -656,32 +663,17 @@ int rom_load_all(void)
     Rom *rom;
 
     QTAILQ_FOREACH(rom, &roms, next) {
-        if (addr < rom->min)
-            addr = rom->min;
-        if (rom->max) {
-            /* load address range */
-            if (rom->align) {
-                addr += (rom->align-1);
-                addr &= ~(rom->align-1);
-            }
-            if (addr + rom->romsize > rom->max) {
-                fprintf(stderr, "rom: out of memory (rom %s, "
-                        "addr 0x" TARGET_FMT_plx
-                        ", size 0x%zx, max 0x" TARGET_FMT_plx ")\n",
-                        rom->name, addr, rom->romsize, rom->max);
-                return -1;
-            }
-        } else {
-            /* fixed address requested */
-            if (addr != rom->min) {
-                fprintf(stderr, "rom: requested regions overlap "
-                        "(rom %s. free=0x" TARGET_FMT_plx
-                        ", addr=0x" TARGET_FMT_plx ")\n",
-                        rom->name, addr, rom->min);
-                return -1;
-            }
+        if (rom->fw_file) {
+            continue;
         }
-        rom->addr = addr;
+        if (addr > rom->addr) {
+            fprintf(stderr, "rom: requested regions overlap "
+                    "(rom %s. free=0x" TARGET_FMT_plx
+                    ", addr=0x" TARGET_FMT_plx ")\n",
+                    rom->name, addr, rom->addr);
+            return -1;
+        }
+        addr  = rom->addr;
         addr += rom->romsize;
         memtype = cpu_get_physical_page_desc(rom->addr) & (3 << IO_MEM_SHIFT);
         if (memtype == IO_MEM_ROM)
@@ -692,22 +684,35 @@ int rom_load_all(void)
     return 0;
 }
 
+void rom_set_fw(void *f)
+{
+    fw_cfg = f;
+}
+
 static Rom *find_rom(target_phys_addr_t addr)
 {
     Rom *rom;
 
     QTAILQ_FOREACH(rom, &roms, next) {
-        if (rom->max)
+        if (rom->fw_file) {
             continue;
-        if (rom->min > addr)
+        }
+        if (rom->addr > addr) {
             continue;
-        if (rom->min + rom->romsize < addr)
+        }
+        if (rom->addr + rom->romsize < addr) {
             continue;
+        }
         return rom;
     }
     return NULL;
 }
 
+/*
+ * Copies memory from registered ROMs to dest. Any memory that is contained in
+ * a ROM between addr and addr + size is copied. Note that this can involve
+ * multiple ROMs, which need not start at addr and need not end at addr + size.
+ */
 int rom_copy(uint8_t *dest, target_phys_addr_t addr, size_t size)
 {
     target_phys_addr_t end = addr + size;
@@ -716,25 +721,27 @@ int rom_copy(uint8_t *dest, target_phys_addr_t addr, size_t size)
     Rom *rom;
 
     QTAILQ_FOREACH(rom, &roms, next) {
-        if (rom->max)
+        if (rom->fw_file) {
             continue;
-        if (rom->min > addr)
+        }
+        if (rom->addr + rom->romsize < addr) {
             continue;
-        if (rom->min + rom->romsize < addr)
-            continue;
-        if (rom->min > end)
+        }
+        if (rom->addr > end) {
             break;
-        if (!rom->data)
+        }
+        if (!rom->data) {
             continue;
+        }
 
-        d = dest + (rom->min - addr);
+        d = dest + (rom->addr - addr);
         s = rom->data;
         l = rom->romsize;
 
-        if (rom->min < addr) {
+        if (rom->addr < addr) {
             d = dest;
-            s += (addr - rom->min);
-            l -= (addr - rom->min);
+            s += (addr - rom->addr);
+            l -= (addr - rom->addr);
         }
         if ((d + l) > (dest + size)) {
             l = dest - d;
@@ -753,7 +760,7 @@ void *rom_ptr(target_phys_addr_t addr)
     rom = find_rom(addr);
     if (!rom || !rom->data)
         return NULL;
-    return rom->data + (addr - rom->min);
+    return rom->data + (addr - rom->addr);
 }
 
 void do_info_roms(Monitor *mon)
@@ -761,10 +768,19 @@ void do_info_roms(Monitor *mon)
     Rom *rom;
 
     QTAILQ_FOREACH(rom, &roms, next) {
-        monitor_printf(mon, "addr=" TARGET_FMT_plx
-                       " size=0x%06zx mem=%s name=\"%s\" \n",
-                       rom->addr, rom->romsize,
-                       rom->isrom ? "rom" : "ram",
-                       rom->name);
+        if (!rom->fw_file) {
+            monitor_printf(mon, "addr=" TARGET_FMT_plx
+                           " size=0x%06zx mem=%s name=\"%s\" \n",
+                           rom->addr, rom->romsize,
+                           rom->isrom ? "rom" : "ram",
+                           rom->name);
+        } else {
+            monitor_printf(mon, "fw=%s/%s"
+                           " size=0x%06zx name=\"%s\" \n",
+                           rom->fw_dir,
+                           rom->fw_file,
+                           rom->romsize,
+                           rom->name);
+        }
     }
 }

hw/loader.h

@@ -19,19 +19,21 @@ void pstrcpy_targphys(const char *name,
                       target_phys_addr_t dest, int buf_size,
                       const char *source);
 
-int rom_add_file(const char *file,
-                 target_phys_addr_t min, target_phys_addr_t max, int align);
+
+int rom_add_file(const char *file, const char *fw_dir,
+                 target_phys_addr_t addr);
 int rom_add_blob(const char *name, const void *blob, size_t len,
-                 target_phys_addr_t min, target_phys_addr_t max, int align);
+                 target_phys_addr_t addr);
 int rom_load_all(void);
+void rom_set_fw(void *f);
 int rom_copy(uint8_t *dest, target_phys_addr_t addr, size_t size);
 void *rom_ptr(target_phys_addr_t addr);
 void do_info_roms(Monitor *mon);
 
 #define rom_add_file_fixed(_f, _a)              \
-    rom_add_file(_f, _a, 0, 0)
+    rom_add_file(_f, NULL, _a)
 #define rom_add_blob_fixed(_f, _b, _l, _a)      \
-    rom_add_blob(_f, _b, _l, _a, 0, 0)
+    rom_add_blob(_f, _b, _l, _a)
 
 #define PC_ROM_MIN_VGA     0xc0000
 #define PC_ROM_MIN_OPTION  0xc8000

hw/lsi53c895a.c

@@ -173,11 +173,15 @@ do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__);} while (0)
 /* Flag set if this is a tagged command.  */
 #define LSI_TAG_VALID     (1 << 16)
 
-typedef struct {
+typedef struct lsi_request {
     uint32_t tag;
+    SCSIDevice *dev;
+    uint32_t dma_len;
+    uint8_t *dma_buf;
     uint32_t pending;
     int out;
-} lsi_queue;
+    QTAILQ_ENTRY(lsi_request) next;
+} lsi_request;
 
 typedef struct {
     PCIDevice dev;
@@ -198,16 +202,13 @@ typedef struct {
      * 3 if a DMA operation is in progress.  */
     int waiting;
     SCSIBus bus;
-    SCSIDevice *current_dev;
+    SCSIDevice *select_dev;
     int current_lun;
     /* The tag is a combination of the device ID and the SCSI tag.  */
-    uint32_t current_tag;
-    uint32_t current_dma_len;
+    uint32_t select_tag;
     int command_complete;
-    uint8_t *dma_buf;
-    lsi_queue *queue;
-    int queue_len;
-    int active_commands;
+    QTAILQ_HEAD(, lsi_request) queue;
+    lsi_request *current;
 
     uint32_t dsa;
     uint32_t temp;
@@ -370,7 +371,7 @@ static int lsi_dma_64bit(LSIState *s)
 static uint8_t lsi_reg_readb(LSIState *s, int offset);
 static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val);
 static void lsi_execute_script(LSIState *s);
-static void lsi_reselect(LSIState *s, uint32_t tag);
+static void lsi_reselect(LSIState *s, lsi_request *p);
 
 static inline uint32_t read_dword(LSIState *s, uint32_t addr)
 {
@@ -391,9 +392,9 @@ static void lsi_stop_script(LSIState *s)
 
 static void lsi_update_irq(LSIState *s)
 {
-    int i;
     int level;
     static int last_level;
+    lsi_request *p;
 
     /* It's unclear whether the DIP/SIP bits should be cleared when the
        Interrupt Status Registers are cleared or when istat0 is read.
@@ -427,9 +428,9 @@ static void lsi_update_irq(LSIState *s)
     if (!level && lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON)) {
         DPRINTF("Handled IRQs & disconnected, looking for pending "
                 "processes\n");
-        for (i = 0; i < s->active_commands; i++) {
-            if (s->queue[i].pending) {
-                lsi_reselect(s, s->queue[i].tag);
+        QTAILQ_FOREACH(p, &s->queue, next) {
+            if (p->pending) {
+                lsi_reselect(s, p);
                 break;
             }
         }
@@ -508,15 +509,16 @@ static void lsi_do_dma(LSIState *s, int out)
     uint32_t count;
     target_phys_addr_t addr;
 
-    if (!s->current_dma_len) {
+    assert(s->current);
+    if (!s->current->dma_len) {
         /* Wait until data is available.  */
         DPRINTF("DMA no data available\n");
         return;
     }
 
     count = s->dbc;
-    if (count > s->current_dma_len)
-        count = s->current_dma_len;
+    if (count > s->current->dma_len)
+        count = s->current->dma_len;
 
     addr = s->dnad;
     /* both 40 and Table Indirect 64-bit DMAs store upper bits in dnad64 */
@@ -532,29 +534,29 @@ static void lsi_do_dma(LSIState *s, int out)
     s->dnad += count;
     s->dbc -= count;
 
-    if (s->dma_buf == NULL) {
-        s->dma_buf = s->current_dev->info->get_buf(s->current_dev,
-                                                   s->current_tag);
+    if (s->current->dma_buf == NULL) {
+        s->current->dma_buf = s->current->dev->info->get_buf(s->current->dev,
+                                                             s->current->tag);
     }
 
     /* ??? Set SFBR to first data byte.  */
     if (out) {
-        cpu_physical_memory_read(addr, s->dma_buf, count);
+        cpu_physical_memory_read(addr, s->current->dma_buf, count);
     } else {
-        cpu_physical_memory_write(addr, s->dma_buf, count);
+        cpu_physical_memory_write(addr, s->current->dma_buf, count);
     }
-    s->current_dma_len -= count;
-    if (s->current_dma_len == 0) {
-        s->dma_buf = NULL;
+    s->current->dma_len -= count;
+    if (s->current->dma_len == 0) {
+        s->current->dma_buf = NULL;
         if (out) {
             /* Write the data.  */
-            s->current_dev->info->write_data(s->current_dev, s->current_tag);
+            s->current->dev->info->write_data(s->current->dev, s->current->tag);
         } else {
             /* Request any remaining data.  */
-            s->current_dev->info->read_data(s->current_dev, s->current_tag);
+            s->current->dev->info->read_data(s->current->dev, s->current->tag);
         }
     } else {
-        s->dma_buf += count;
+        s->current->dma_buf += count;
         lsi_resume_script(s);
     }
 }
@@ -563,15 +565,14 @@ static void lsi_do_dma(LSIState *s, int out)
 /* Add a command to the queue.  */
 static void lsi_queue_command(LSIState *s)
 {
-    lsi_queue *p;
+    lsi_request *p = s->current;
 
     DPRINTF("Queueing tag=0x%x\n", s->current_tag);
-    if (s->queue_len == s->active_commands) {
-        s->queue_len++;
-        s->queue = qemu_realloc(s->queue, s->queue_len * sizeof(lsi_queue));
-    }
-    p = &s->queue[s->active_commands++];
-    p->tag = s->current_tag;
+    assert(s->current != NULL);
+    assert(s->current->dma_len == 0);
+    QTAILQ_INSERT_TAIL(&s->queue, s->current, next);
+    s->current = NULL;
+
     p->pending = 0;
     p->out = (s->sstat1 & PHASE_MASK) == PHASE_DO;
 }
@@ -588,45 +589,29 @@ static void lsi_add_msg_byte(LSIState *s, uint8_t data)
 }
 
 /* Perform reselection to continue a command.  */
-static void lsi_reselect(LSIState *s, uint32_t tag)
+static void lsi_reselect(LSIState *s, lsi_request *p)
 {
-    lsi_queue *p;
-    int n;
     int id;
 
-    p = NULL;
-    for (n = 0; n < s->active_commands; n++) {
-        p = &s->queue[n];
-        if (p->tag == tag)
-            break;
-    }
-    if (n == s->active_commands) {
-        BADF("Reselected non-existant command tag=0x%x\n", tag);
-        return;
-    }
-    id = (tag >> 8) & 0xf;
+    assert(s->current == NULL);
+    QTAILQ_REMOVE(&s->queue, p, next);
+    s->current = p;
+
+    id = (p->tag >> 8) & 0xf;
     s->ssid = id | 0x80;
     /* LSI53C700 Family Compatibility, see LSI53C895A 4-73 */
     if (!s->dcntl & LSI_DCNTL_COM) {
         s->sfbr = 1 << (id & 0x7);
     }
     DPRINTF("Reselected target %d\n", id);
-    s->current_dev = s->bus.devs[id];
-    s->current_tag = tag;
     s->scntl1 |= LSI_SCNTL1_CON;
     lsi_set_phase(s, PHASE_MI);
     s->msg_action = p->out ? 2 : 3;
-    s->current_dma_len = p->pending;
-    s->dma_buf = NULL;
+    s->current->dma_len = p->pending;
     lsi_add_msg_byte(s, 0x80);
-    if (s->current_tag & LSI_TAG_VALID) {
+    if (s->current->tag & LSI_TAG_VALID) {
         lsi_add_msg_byte(s, 0x20);
-        lsi_add_msg_byte(s, tag & 0xff);
-    }
-
-    s->active_commands--;
-    if (n != s->active_commands) {
-        s->queue[n] = s->queue[s->active_commands];
+        lsi_add_msg_byte(s, p->tag & 0xff);
     }
 
     if (lsi_irq_on_rsl(s)) {
@@ -638,10 +623,9 @@ static void lsi_reselect(LSIState *s, uint32_t tag)
    the device was reselected, nonzero if the IO is deferred.  */
 static int lsi_queue_tag(LSIState *s, uint32_t tag, uint32_t arg)
 {
-    lsi_queue *p;
-    int i;
-    for (i = 0; i < s->active_commands; i++) {
-        p = &s->queue[i];
+    lsi_request *p;
+
+    QTAILQ_FOREACH(p, &s->queue, next) {
         if (p->tag == tag) {
             if (p->pending) {
                 BADF("Multiple IO pending for tag %d\n", tag);
@@ -656,10 +640,10 @@ static int lsi_queue_tag(LSIState *s, uint32_t tag, uint32_t arg)
                 (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON) &&
                  !(s->istat0 & (LSI_ISTAT0_SIP | LSI_ISTAT0_DIP)))) {
                 /* Reselect device.  */
-                lsi_reselect(s, tag);
+                lsi_reselect(s, p);
                 return 0;
             } else {
-               DPRINTF("Queueing IO tag=0x%x\n", tag);
+                DPRINTF("Queueing IO tag=0x%x\n", tag);
                 p->pending = arg;
                 return 1;
             }
@@ -687,11 +671,15 @@ static void lsi_command_complete(SCSIBus *bus, int reason, uint32_t tag,
         } else {
             lsi_set_phase(s, PHASE_ST);
         }
+
+        qemu_free(s->current);
+        s->current = NULL;
+
         lsi_resume_script(s);
         return;
     }
 
-    if (s->waiting == 1 || tag != s->current_tag ||
+    if (s->waiting == 1 || !s->current || tag != s->current->tag ||
         (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON))) {
         if (lsi_queue_tag(s, tag, arg))
             return;
@@ -699,7 +687,7 @@ static void lsi_command_complete(SCSIBus *bus, int reason, uint32_t tag,
 
     /* host adapter (re)connected */
     DPRINTF("Data ready tag=0x%x len=%d\n", tag, arg);
-    s->current_dma_len = arg;
+    s->current->dma_len = arg;
     s->command_complete = 1;
     if (!s->waiting)
         return;
@@ -721,14 +709,20 @@ static void lsi_do_command(LSIState *s)
     cpu_physical_memory_read(s->dnad, buf, s->dbc);
     s->sfbr = buf[0];
     s->command_complete = 0;
-    n = s->current_dev->info->send_command(s->current_dev, s->current_tag, buf,
-                                           s->current_lun);
+
+    assert(s->current == NULL);
+    s->current = qemu_mallocz(sizeof(lsi_request));
+    s->current->tag = s->select_tag;
+    s->current->dev = s->select_dev;
+
+    n = s->current->dev->info->send_command(s->current->dev, s->current->tag, buf,
+                                            s->current_lun);
     if (n > 0) {
         lsi_set_phase(s, PHASE_DI);
-        s->current_dev->info->read_data(s->current_dev, s->current_tag);
+        s->current->dev->info->read_data(s->current->dev, s->current->tag);
     } else if (n < 0) {
         lsi_set_phase(s, PHASE_DO);
-        s->current_dev->info->write_data(s->current_dev, s->current_tag);
+        s->current->dev->info->write_data(s->current->dev, s->current->tag);
     }
 
     if (!s->command_complete) {
@@ -851,16 +845,16 @@ static void lsi_do_msgout(LSIState *s)
             }
             break;
         case 0x20: /* SIMPLE queue */
-            s->current_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
+            s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
             DPRINTF("SIMPLE queue tag=0x%x\n", s->current_tag & 0xff);
             break;
         case 0x21: /* HEAD of queue */
             BADF("HEAD queue not implemented\n");
-            s->current_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
+            s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
             break;
         case 0x22: /* ORDERED queue */
             BADF("ORDERED queue not implemented\n");
-            s->current_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
+            s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
             break;
         default:
             if ((msg & 0x80) == 0) {
@@ -905,17 +899,17 @@ static void lsi_memcpy(LSIState *s, uint32_t dest, uint32_t src, int count)
 
 static void lsi_wait_reselect(LSIState *s)
 {
-    int i;
+    lsi_request *p;
+
     DPRINTF("Wait Reselect\n");
-    if (s->current_dma_len)
-        BADF("Reselect with pending DMA\n");
-    for (i = 0; i < s->active_commands; i++) {
-        if (s->queue[i].pending) {
-            lsi_reselect(s, s->queue[i].tag);
+
+    QTAILQ_FOREACH(p, &s->queue, next) {
+        if (p->pending) {
+            lsi_reselect(s, p);
             break;
         }
     }
-    if (s->current_dma_len == 0) {
+    if (s->current == NULL) {
         s->waiting = 1;
     }
 }
@@ -1093,8 +1087,8 @@ again:
                 /* ??? Linux drivers compain when this is set.  Maybe
                    it only applies in low-level mode (unimplemented).
                 lsi_script_scsi_interrupt(s, LSI_SIST0_CMP, 0); */
-                s->current_dev = s->bus.devs[id];
-                s->current_tag = id << 8;
+                s->select_dev = s->bus.devs[id];
+                s->select_tag = id << 8;
                 s->scntl1 |= LSI_SCNTL1_CON;
                 if (insn & (1 << 3)) {
                     s->socl |= LSI_SOCL_ATN;
@@ -2006,9 +2000,11 @@ static void lsi_pre_save(void *opaque)
 {
     LSIState *s = opaque;
 
-    assert(s->dma_buf == NULL);
-    assert(s->current_dma_len == 0);
-    assert(s->active_commands == 0);
+    if (s->current) {
+        assert(s->current->dma_buf == NULL);
+        assert(s->current->dma_len == 0);
+    }
+    assert(QTAILQ_EMPTY(&s->queue));
 }
 
 static const VMStateDescription vmstate_lsi_scsi = {
@@ -2101,8 +2097,6 @@ static int lsi_scsi_uninit(PCIDevice *d)
     cpu_unregister_io_memory(s->mmio_io_addr);
     cpu_unregister_io_memory(s->ram_io_addr);
 
-    qemu_free(s->queue);
-
     return 0;
 }
 
@@ -2138,9 +2132,7 @@ static int lsi_scsi_init(PCIDevice *dev)
                            PCI_BASE_ADDRESS_SPACE_MEMORY, lsi_mmio_mapfunc);
     pci_register_bar((struct PCIDevice *)s, 2, 0x2000,
                            PCI_BASE_ADDRESS_SPACE_MEMORY, lsi_ram_mapfunc);
-    s->queue = qemu_malloc(sizeof(lsi_queue));
-    s->queue_len = 1;
-    s->active_commands = 0;
+    QTAILQ_INIT(&s->queue);
 
     lsi_soft_reset(s);
 

hw/mc146818rtc.c

@@ -30,7 +30,7 @@
 
 //#define DEBUG_CMOS
 
-#define RTC_REINJECT_ON_ACK_COUNT 1000
+#define RTC_REINJECT_ON_ACK_COUNT 20
 
 #define RTC_SECONDS             0
 #define RTC_SECONDS_ALARM       1

hw/musicpal.c

@@ -67,7 +67,7 @@
 #define MP_AUDIO_IRQ            30
 
 /* Wolfson 8750 I2C address */
-#define MP_WM_ADDR              0x34
+#define MP_WM_ADDR              0x1A
 
 /* Ethernet register offsets */
 #define MP_ETH_SMIR             0x010
@@ -238,14 +238,13 @@ static void eth_send(mv88w8618_eth_state *s, int queue_index)
 {
     uint32_t desc_addr = s->tx_queue[queue_index];
     mv88w8618_tx_desc desc;
+    uint32_t next_desc;
     uint8_t buf[2048];
     int len;
 
-    if (!desc_addr) {
-        return;
-    }
     do {
         eth_tx_desc_get(desc_addr, &desc);
+        next_desc = desc.next;
         if (desc.cmdstat & MP_ETH_TX_OWN) {
             len = desc.bytes;
             if (len < 2048) {
@@ -256,7 +255,7 @@ static void eth_send(mv88w8618_eth_state *s, int queue_index)
             s->icr |= 1 << (MP_ETH_IRQ_TXLO_BIT - queue_index);
             eth_tx_desc_put(desc_addr, &desc);
         }
-        desc_addr = desc.next;
+        desc_addr = next_desc;
     } while (desc_addr != s->tx_queue[queue_index]);
 }
 

hw/pc.c

@@ -560,19 +560,21 @@ static int load_multiboot(void *fw_cfg,
     }
     if (!(flags & 0x00010000)) { /* MULTIBOOT_HEADER_HAS_ADDR */
         uint64_t elf_entry;
+        uint64_t elf_low, elf_high;
         int kernel_size;
         fclose(f);
-        kernel_size = load_elf(kernel_filename, 0, &elf_entry, NULL, NULL,
+        kernel_size = load_elf(kernel_filename, 0, &elf_entry, &elf_low, &elf_high,
                                0, ELF_MACHINE, 0);
         if (kernel_size < 0) {
             fprintf(stderr, "Error while loading elf kernel\n");
             exit(1);
         }
-        mh_load_addr = mh_entry_addr = elf_entry;
-        mb_kernel_size = kernel_size;
+        mh_load_addr = elf_low;
+        mb_kernel_size = elf_high - elf_low;
+        mh_entry_addr = elf_entry;
 
         mb_kernel_data = qemu_malloc(mb_kernel_size);
-        if (rom_copy(mb_kernel_data, elf_entry, kernel_size) != kernel_size) {
+        if (rom_copy(mb_kernel_data, mh_load_addr, mb_kernel_size) != mb_kernel_size) {
             fprintf(stderr, "Error while fetching elf kernel from rom\n");
             exit(1);
         }
@@ -1088,6 +1090,7 @@ static void pc_init1(ram_addr_t ram_size,
                                  bios_size, bios_offset | IO_MEM_ROM);
 
     fw_cfg = bochs_bios_init();
+    rom_set_fw(fw_cfg);
 
     if (linux_boot) {
         load_linux(fw_cfg, kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size);
@@ -1285,7 +1288,7 @@ void cmos_set_s3_resume(void)
 }
 
 static QEMUMachine pc_machine = {
-    .name = "pc-0.11",
+    .name = "pc-0.12",
     .alias = "pc",
     .desc = "Standard PC",
     .init = pc_init_pci,
@@ -1293,6 +1296,33 @@ static QEMUMachine pc_machine = {
     .is_default = 1,
 };
 
+static QEMUMachine pc_machine_v0_11 = {
+    .name = "pc-0.11",
+    .desc = "Standard PC, qemu 0.11",
+    .init = pc_init_pci,
+    .max_cpus = 255,
+    .compat_props = (GlobalProperty[]) {
+        {
+            .driver   = "virtio-blk-pci",
+            .property = "vectors",
+            .value    = stringify(0),
+        },{
+            .driver   = "ide-drive",
+            .property = "ver",
+            .value    = "0.11",
+        },{
+            .driver   = "scsi-disk",
+            .property = "ver",
+            .value    = "0.11",
+        },{
+            .driver   = "PCI",
+            .property = "rombar",
+            .value    = stringify(0),
+        },
+        { /* end of list */ }
+    }
+};
+
 static QEMUMachine pc_machine_v0_10 = {
     .name = "pc-0.10",
     .desc = "Standard PC, qemu 0.10",
@@ -1315,6 +1345,18 @@ static QEMUMachine pc_machine_v0_10 = {
             .driver   = "virtio-blk-pci",
             .property = "vectors",
             .value    = stringify(0),
+        },{
+            .driver   = "ide-drive",
+            .property = "ver",
+            .value    = "0.10",
+        },{
+            .driver   = "scsi-disk",
+            .property = "ver",
+            .value    = "0.10",
+        },{
+            .driver   = "PCI",
+            .property = "rombar",
+            .value    = stringify(0),
         },
         { /* end of list */ }
     },
@@ -1330,6 +1372,7 @@ static QEMUMachine isapc_machine = {
 static void pc_machine_init(void)
 {
     qemu_register_machine(&pc_machine);
+    qemu_register_machine(&pc_machine_v0_11);
     qemu_register_machine(&pc_machine_v0_10);
     qemu_register_machine(&isapc_machine);
 }

hw/pci-hotplug.c

@@ -199,14 +199,10 @@ static PCIDevice *qemu_pci_hot_add_storage(Monitor *mon,
 
     switch (type) {
     case IF_SCSI:
-        if (!dinfo) {
-            monitor_printf(mon, "scsi requires a backing file/device.\n");
-            return NULL;
-        }
         dev = pci_create(bus, devfn, "lsi53c895a");
         if (qdev_init(&dev->qdev) < 0)
             dev = NULL;
-        if (dev) {
+        if (dev && dinfo) {
             if (scsi_hot_add(&dev->qdev, dinfo, 0) != 0) {
                 qdev_unplug(&dev->qdev);
                 dev = NULL;

hw/pci.c

@@ -26,6 +26,7 @@
 #include "monitor.h"
 #include "net.h"
 #include "sysemu.h"
+#include "loader.h"
 
 //#define DEBUG_PCI
 #ifdef DEBUG_PCI
@@ -62,12 +63,15 @@ static struct BusInfo pci_bus_info = {
     .print_dev  = pcibus_dev_print,
     .props      = (Property[]) {
         DEFINE_PROP_PCI_DEVFN("addr", PCIDevice, devfn, -1),
+        DEFINE_PROP_STRING("romfile", PCIDevice, romfile),
+        DEFINE_PROP_UINT32("rombar",  PCIDevice, rom_bar, 1),
         DEFINE_PROP_END_OF_LIST()
     }
 };
 
 static void pci_update_mappings(PCIDevice *d);
 static void pci_set_irq(void *opaque, int irq_num, int level);
+static int pci_add_option_rom(PCIDevice *pdev);
 
 target_phys_addr_t pci_mem_base;
 static uint16_t pci_default_sub_vendor_id = PCI_SUBVENDOR_ID_REDHAT_QUMRANET;
@@ -518,8 +522,7 @@ static void pci_init_wmask(PCIDevice *dev)
     dev->wmask[PCI_CACHE_LINE_SIZE] = 0xff;
     dev->wmask[PCI_INTERRUPT_LINE] = 0xff;
     pci_set_word(dev->wmask + PCI_COMMAND,
-                 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-                 PCI_COMMAND_INTX_DISABLE);
+                 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 
     memset(dev->wmask + PCI_CONFIG_HEADER_SIZE, 0xff,
            config_size - PCI_CONFIG_HEADER_SIZE);
@@ -944,25 +947,6 @@ static void pci_update_mappings(PCIDevice *d)
     }
 }
 
-static inline int pci_irq_disabled(PCIDevice *d)
-{
-    return pci_get_word(d->config + PCI_COMMAND) & PCI_COMMAND_INTX_DISABLE;
-}
-
-/* Called after interrupt disabled field update in config space,
- * assert/deassert interrupts if necessary.
- * Gets original interrupt disable bit value (before update). */
-static void pci_update_irq_disabled(PCIDevice *d, int was_irq_disabled)
-{
-    int i, disabled = pci_irq_disabled(d);
-    if (disabled == was_irq_disabled)
-        return;
-    for (i = 0; i < PCI_NUM_PINS; ++i) {
-        int state = pci_irq_state(d, i);
-        pci_change_irq_level(d, i, disabled ? -state : state);
-    }
-}
-
 uint32_t pci_default_read_config(PCIDevice *d,
                                  uint32_t address, int len)
 {
@@ -975,7 +959,7 @@ uint32_t pci_default_read_config(PCIDevice *d,
 
 void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l)
 {
-    int i, was_irq_disabled = pci_irq_disabled(d);
+    int i;
     uint32_t config_size = pci_config_size(d);
 
     for (i = 0; i < l && addr + i < config_size; val >>= 8, ++i) {
@@ -987,9 +971,6 @@ void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l)
         ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) ||
         range_covers_byte(addr, l, PCI_COMMAND))
         pci_update_mappings(d);
-
-    if (range_covers_byte(addr, l, PCI_COMMAND))
-        pci_update_irq_disabled(d, was_irq_disabled);
 }
 
 /***********************************************************/
@@ -1007,8 +988,6 @@ static void pci_set_irq(void *opaque, int irq_num, int level)
 
     pci_set_irq_state(pci_dev, irq_num, level);
     pci_update_irq_status(pci_dev);
-    if (pci_irq_disabled(pci_dev))
-        return;
     pci_change_irq_level(pci_dev, irq_num, change);
 }
 
@@ -1386,6 +1365,12 @@ static int pci_qdev_init(DeviceState *qdev, DeviceInfo *base)
     rc = info->init(pci_dev);
     if (rc != 0)
         return rc;
+
+    /* rom loading */
+    if (pci_dev->romfile == NULL && info->romfile != NULL)
+        pci_dev->romfile = qemu_strdup(info->romfile);
+    pci_add_option_rom(pci_dev);
+
     if (qdev->hotplugged)
         bus->hotplug(pci_dev, 1);
     return 0;
@@ -1463,6 +1448,64 @@ static uint8_t pci_find_capability_list(PCIDevice *pdev, uint8_t cap_id,
     return next;
 }
 
+static void pci_map_option_rom(PCIDevice *pdev, int region_num, pcibus_t addr, pcibus_t size, int type)
+{
+    cpu_register_physical_memory(addr, size, pdev->rom_offset);
+}
+
+/* Add an option rom for the device */
+static int pci_add_option_rom(PCIDevice *pdev)
+{
+    int size;
+    char *path;
+    void *ptr;
+
+    if (!pdev->romfile)
+        return 0;
+    if (strlen(pdev->romfile) == 0)
+        return 0;
+
+    if (!pdev->rom_bar) {
+        /*
+         * Load rom via fw_cfg instead of creating a rom bar,
+         * for 0.11 compatibility.
+         */
+        int class = pci_get_word(pdev->config + PCI_CLASS_DEVICE);
+        if (class == 0x0300) {
+            rom_add_vga(pdev->romfile);
+        } else {
+            rom_add_option(pdev->romfile);
+        }
+        return 0;
+    }
+
+    path = qemu_find_file(QEMU_FILE_TYPE_BIOS, pdev->romfile);
+    if (path == NULL) {
+        path = qemu_strdup(pdev->romfile);
+    }
+
+    size = get_image_size(path);
+    if (size < 0) {
+        qemu_error("%s: failed to find romfile \"%s\"\n", __FUNCTION__,
+                   pdev->romfile);
+        return -1;
+    }
+    if (size & (size - 1)) {
+        size = 1 << qemu_fls(size);
+    }
+
+    pdev->rom_offset = qemu_ram_alloc(size);
+
+    ptr = qemu_get_ram_ptr(pdev->rom_offset);
+    load_image(path, ptr);
+    qemu_free(path);
+
+    pci_register_bar(pdev, PCI_ROM_SLOT, size,
+                     0, pci_map_option_rom);
+
+    return 0;
+}
+
 /* Reserve space and add capability to the linked list in pci config space */
 int pci_add_capability(PCIDevice *pdev, uint8_t cap_id, uint8_t size)
 {

hw/pci.h

@@ -101,7 +101,6 @@ typedef struct PCIIORegion {
 #define  PCI_COMMAND_IO		0x1	/* Enable response in I/O space */
 #define  PCI_COMMAND_MEMORY	0x2	/* Enable response in Memory space */
 #define  PCI_COMMAND_MASTER	0x4	/* Enable bus master */
-#define  PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
 #define PCI_STATUS              0x06    /* 16 bits */
 #define  PCI_STATUS_INTERRUPT   0x08
 #define PCI_REVISION_ID         0x08    /* 8 bits  */
@@ -243,6 +242,11 @@ struct PCIDevice {
     uint32_t msix_bar_size;
     /* Version id needed for VMState */
     int32_t version_id;
+
+    /* Location of option rom */
+    char *romfile;
+    ram_addr_t rom_offset;
+    uint32_t rom_bar;
 };
 
 PCIDevice *pci_register_device(PCIBus *bus, const char *name,
@@ -381,6 +385,9 @@ typedef struct {
 
     /* pcie stuff */
     int is_express;   /* is this device pci express? */
+
+    /* rom bar */
+    const char *romfile;
 } PCIDeviceInfo;
 
 void pci_qdev_register(PCIDeviceInfo *info);

hw/qdev-properties.c

@@ -500,7 +500,12 @@ int qdev_prop_parse(DeviceState *dev, const char *name, const char *value)
                 dev->info->name, name);
         return -1;
     }
-    return prop->info->parse(dev, prop, value);
+    if (prop->info->parse(dev, prop, value) != 0) {
+        fprintf(stderr, "property \"%s.%s\": failed to parse \"%s\"\n",
+                dev->info->name, name, value);
+        return -1;
+    }
+    return 0;
 }
 
 void qdev_prop_set(DeviceState *dev, const char *name, void *src, enum PropertyType type)
@@ -619,7 +624,7 @@ void qdev_prop_set_globals(DeviceState *dev)
             continue;
         }
         if (qdev_prop_parse(dev, prop->property, prop->value) != 0) {
-            abort();
+            exit(1);
         }
     }
 }

hw/rtl8139.c

@@ -3353,14 +3353,6 @@ static int pci_rtl8139_init(PCIDevice *dev)
     qemu_mod_timer(s->timer,
         rtl8139_get_next_tctr_time(s,qemu_get_clock(vm_clock)));
 #endif /* RTL8139_ONBOARD_TIMER */
-
-    if (!dev->qdev.hotplugged) {
-        static int loaded = 0;
-        if (!loaded) {
-            rom_add_option("pxe-rtl8139.bin");
-            loaded = 1;
-        }
-    }
     return 0;
 }
 
@@ -3371,6 +3363,7 @@ static PCIDeviceInfo rtl8139_info = {
     .qdev.vmsd  = &vmstate_rtl8139,
     .init       = pci_rtl8139_init,
     .exit       = pci_rtl8139_uninit,
+    .romfile    = "pxe-rtl8139.bin",
     .qdev.props = (Property[]) {
         DEFINE_NIC_PROPERTIES(RTL8139State, conf),
         DEFINE_PROP_END_OF_LIST(),

hw/s390-virtio-bus.c

@@ -307,7 +307,7 @@ static void virtio_s390_notify(void *opaque, uint16_t vector)
     uint64_t token = s390_virtio_device_vq_token(dev, vector);
 
     /* XXX kvm dependency! */
-    kvm_s390_virtio_irq(s390_cpu_addr2state(0), 1, token);
+    kvm_s390_virtio_irq(s390_cpu_addr2state(0), 0, token);
 }
 
 /**************** S390 Virtio Bus Device Descriptions *******************/

hw/s390-virtio.c

@@ -142,6 +142,13 @@ static void s390_init(ram_addr_t ram_size,
     ram_addr_t initrd_size = 0;
     int i;
 
+    /* XXX we only work on KVM for now */
+
+    if (!kvm_enabled()) {
+        fprintf(stderr, "The S390 target only works with KVM enabled\n");
+        exit(1);
+    }
+
     /* get a BUS */
     s390_bus = s390_virtio_bus_init(&ram_size);
 
@@ -181,7 +188,7 @@ static void s390_init(ram_addr_t ram_size,
 
         cpu_synchronize_state(env);
         env->psw.addr = KERN_IMAGE_START;
-        env->psw.mask = 0x0000000180000000UL;
+        env->psw.mask = 0x0000000180000000ULL;
     }
 
     if (initrd_filename) {
@@ -201,7 +208,11 @@ static void s390_init(ram_addr_t ram_size,
     }
 
     /* Create VirtIO console */
-    qdev_init_nofail(qdev_create((BusState *)s390_bus, "virtio-console-s390"));
+    for(i = 0; i < MAX_VIRTIO_CONSOLES; i++) {
+        if (virtcon_hds[i]) {
+            qdev_init_nofail(qdev_create((BusState *)s390_bus, "virtio-console-s390"));
+        }
+    }
 
     /* Create VirtIO network adapters */
     for(i = 0; i < nb_nics; i++) {
@@ -209,7 +220,7 @@ static void s390_init(ram_addr_t ram_size,
         DeviceState *dev;
 
         if (!nd->model) {
-            nd->model = (char*)"virtio";
+            nd->model = qemu_strdup("virtio");
         }
 
         if (strcmp(nd->model, "virtio")) {
@@ -245,7 +256,7 @@ static QEMUMachine s390_machine = {
     .init = s390_init,
     .no_serial = 1,
     .no_parallel = 1,
-    .use_virtcon = 1.
+    .use_virtcon = 1,
     .no_vga = 1,
     .max_cpus = 255,
     .is_default = 1,

hw/scsi-disk.c

@@ -5,6 +5,12 @@
  * Based on code by Fabrice Bellard
  *
  * Written by Paul Brook
+ * Modifications:
+ *  2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
+ *                                 when the allocation length of CDB is smaller
+ *                                 than 36.
+ *  2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
+ *                                 MODE SENSE response.
  *
  * This code is licenced under the LGPL.
  *
@@ -59,6 +65,7 @@ struct SCSIDiskState
     int cluster_size;
     uint64_t max_lba;
     QEMUBH *bh;
+    char *version;
 };
 
 static SCSIDiskReq *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun)
@@ -74,7 +81,7 @@ static SCSIDiskReq *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun)
 
 static void scsi_remove_request(SCSIDiskReq *r)
 {
-    qemu_free(r->iov.iov_base);
+    qemu_vfree(r->iov.iov_base);
     scsi_req_free(&r->req);
 }
 
@@ -309,6 +316,7 @@ static uint8_t *scsi_get_buf(SCSIDevice *d, uint32_t tag)
 static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
 {
     BlockDriverState *bdrv = req->dev->dinfo->bdrv;
+    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
     int buflen = 0;
 
     if (req->cmd.buf[1] & 0x2) {
@@ -406,11 +414,6 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
         return -1;
     }
 
-    if (req->cmd.xfer < 36) {
-        BADF("Error: Inquiry (STANDARD) buffer size %zd "
-             "is less than 36 (TODO: only 5 required)\n", req->cmd.xfer);
-    }
-
     buflen = req->cmd.xfer;
     if (buflen > SCSI_MAX_INQUIRY_LEN)
         buflen = SCSI_MAX_INQUIRY_LEN;
@@ -431,12 +434,22 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
         memcpy(&outbuf[16], "QEMU HARDDISK   ", 16);
     }
     memcpy(&outbuf[8], "QEMU    ", 8);
-    memcpy(&outbuf[32], QEMU_VERSION, 4);
+    memset(&outbuf[32], 0, 4);
+    memcpy(&outbuf[32], s->version ? s->version : QEMU_VERSION,
+           MIN(4, strlen(s->version ? s->version : QEMU_VERSION)));
     /* Identify device as SCSI-3 rev 1.
        Some later commands are also implemented. */
     outbuf[2] = 3;
     outbuf[3] = 2; /* Format 2 */
-    outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
+
+    if (buflen > 36) {
+        outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
+    } else {
+        /* If the allocation length of CDB is too small,
+               the additional length is not adjusted */
+        outbuf[4] = 36 - 5;
+    }
+
     /* Sync data transfer and TCQ.  */
     outbuf[7] = 0x10 | (req->bus->tcq ? 0x02 : 0);
     return buflen;
@@ -1020,6 +1033,7 @@ static SCSIDeviceInfo scsi_disk_info = {
     .get_buf      = scsi_get_buf,
     .qdev.props   = (Property[]) {
         DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.dinfo),
+        DEFINE_PROP_STRING("ver",  SCSIDiskState, version),
         DEFINE_PROP_END_OF_LIST(),
     },
 };

hw/sh7750.c

@@ -396,8 +396,11 @@ static void sh7750_mem_writel(void *opaque, target_phys_addr_t addr,
 	portb_changed(s, temp);
 	return;
     case SH7750_MMUCR_A7:
-	s->cpu->mmucr = mem_value;
-	return;
+        if (mem_value & MMUCR_TI) {
+            cpu_sh4_invalidate_tlb(s->cpu);
+        }
+        s->cpu->mmucr = mem_value & ~MMUCR_TI;
+        return;
     case SH7750_PTEH_A7:
         /* If asid changes, clear all registered tlb entries. */
 	if ((s->cpu->pteh & 0xff) != (mem_value & 0xff))

hw/sh_pci.c

@@ -47,10 +47,15 @@ static void sh_pci_reg_write (void *p, target_phys_addr_t addr, uint32_t val)
         pcic->par = val;
         break;
     case 0x1c4:
-        pcic->mbr = val;
+        pcic->mbr = val & 0xff000001;
         break;
     case 0x1c8:
-        pcic->iobr = val;
+        if ((val & 0xfffc0000) != (pcic->iobr & 0xfffc0000)) {
+            cpu_register_physical_memory(pcic->iobr & 0xfffc0000, 0x40000,
+                                         IO_MEM_UNASSIGNED);
+            pcic->iobr = val & 0xfffc0001;
+            isa_mmio_init(pcic->iobr & 0xfffc0000, 0x40000);
+        }
         break;
     case 0x220:
         pci_data_write(pcic->bus, pcic->par, val, 4);
@@ -66,89 +71,16 @@ static uint32_t sh_pci_reg_read (void *p, target_phys_addr_t addr)
         return le32_to_cpup((uint32_t*)(pcic->dev->config + addr));
     case 0x1c0:
         return pcic->par;
+    case 0x1c4:
+        return pcic->mbr;
+    case 0x1c8:
+        return pcic->iobr;
     case 0x220:
         return pci_data_read(pcic->bus, pcic->par, 4);
     }
     return 0;
 }
 
-static void sh_pci_data_write (SHPCIC *pcic, target_phys_addr_t addr,
-                               uint32_t val, int size)
-{
-    pci_data_write(pcic->bus, addr + pcic->mbr, val, size);
-}
-
-static uint32_t sh_pci_mem_read (SHPCIC *pcic, target_phys_addr_t addr,
-                                 int size)
-{
-    return pci_data_read(pcic->bus, addr + pcic->mbr, size);
-}
-
-static void sh_pci_writeb (void *p, target_phys_addr_t addr, uint32_t val)
-{
-    sh_pci_data_write(p, addr, val, 1);
-}
-
-static void sh_pci_writew (void *p, target_phys_addr_t addr, uint32_t val)
-{
-    sh_pci_data_write(p, addr, val, 2);
-}
-
-static void sh_pci_writel (void *p, target_phys_addr_t addr, uint32_t val)
-{
-    sh_pci_data_write(p, addr, val, 4);
-}
-
-static uint32_t sh_pci_readb (void *p, target_phys_addr_t addr)
-{
-    return sh_pci_mem_read(p, addr, 1);
-}
-
-static uint32_t sh_pci_readw (void *p, target_phys_addr_t addr)
-{
-    return sh_pci_mem_read(p, addr, 2);
-}
-
-static uint32_t sh_pci_readl (void *p, target_phys_addr_t addr)
-{
-    return sh_pci_mem_read(p, addr, 4);
-}
-
-static int sh_pci_addr2port(SHPCIC *pcic, target_phys_addr_t addr)
-{
-    return addr + pcic->iobr;
-}
-
-static void sh_pci_outb (void *p, target_phys_addr_t addr, uint32_t val)
-{
-    cpu_outb(sh_pci_addr2port(p, addr), val);
-}
-
-static void sh_pci_outw (void *p, target_phys_addr_t addr, uint32_t val)
-{
-    cpu_outw(sh_pci_addr2port(p, addr), val);
-}
-
-static void sh_pci_outl (void *p, target_phys_addr_t addr, uint32_t val)
-{
-    cpu_outl(sh_pci_addr2port(p, addr), val);
-}
-
-static uint32_t sh_pci_inb (void *p, target_phys_addr_t addr)
-{
-    return cpu_inb(sh_pci_addr2port(p, addr));
-}
-
-static uint32_t sh_pci_inw (void *p, target_phys_addr_t addr)
-{
-    return cpu_inw(sh_pci_addr2port(p, addr));
-}
-
-static uint32_t sh_pci_inl (void *p, target_phys_addr_t addr)
-{
-    return cpu_inl(sh_pci_addr2port(p, addr));
-}
-
 typedef struct {
     CPUReadMemoryFunc * const r[3];
     CPUWriteMemoryFunc * const w[3];
@@ -159,21 +91,11 @@ static MemOp sh_pci_reg = {
     { NULL, NULL, sh_pci_reg_write },
 };
 
-static MemOp sh_pci_mem = {
-    { sh_pci_readb, sh_pci_readw, sh_pci_readl },
-    { sh_pci_writeb, sh_pci_writew, sh_pci_writel },
-};
-
-static MemOp sh_pci_iop = {
-    { sh_pci_inb, sh_pci_inw, sh_pci_inl },
-    { sh_pci_outb, sh_pci_outw, sh_pci_outl },
-};
-
 PCIBus *sh_pci_register_bus(pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
                             void *opaque, int devfn_min, int nirq)
 {
     SHPCIC *p;
-    int mem, reg, iop;
+    int reg;
 
     p = qemu_mallocz(sizeof(SHPCIC));
     p->bus = pci_register_bus(NULL, "pci",
@@ -182,14 +104,11 @@ PCIBus *sh_pci_register_bus(pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
     p->dev = pci_register_device(p->bus, "SH PCIC", sizeof(PCIDevice),
                                  -1, NULL, NULL);
     reg = cpu_register_io_memory(sh_pci_reg.r, sh_pci_reg.w, p);
-    iop = cpu_register_io_memory(sh_pci_iop.r, sh_pci_iop.w, p);
-    mem = cpu_register_io_memory(sh_pci_mem.r, sh_pci_mem.w, p);
     cpu_register_physical_memory(0x1e200000, 0x224, reg);
-    cpu_register_physical_memory(0x1e240000, 0x40000, iop);
-    cpu_register_physical_memory(0x1d000000, 0x1000000, mem);
     cpu_register_physical_memory(0xfe200000, 0x224, reg);
-    cpu_register_physical_memory(0xfe240000, 0x40000, iop);
-    cpu_register_physical_memory(0xfd000000, 0x1000000, mem);
+
+    p->iobr = 0xfe240000;
+    isa_mmio_init(p->iobr, 0x40000);
 
     pci_config_set_vendor_id(p->dev->config, PCI_VENDOR_ID_HITACHI);
     pci_config_set_device_id(p->dev->config, PCI_DEVICE_ID_HITACHI_SH7751R);

hw/unin_pci.c

@@ -148,7 +148,7 @@ PCIBus *pci_pmac_init(qemu_irq *pic)
 
     /* Use values found on a real PowerMac */
     /* Uninorth main bus */
-    dev = qdev_create(NULL, "uni-north-main");
+    dev = qdev_create(NULL, "uni-north");
     qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     d = FROM_SYSBUS(UNINState, s);
@@ -157,7 +157,7 @@ PCIBus *pci_pmac_init(qemu_irq *pic)
                                          pic, 11 << 3, 4);
 
 #if 0
-    pci_create_simple(d->host_state.bus, 11 << 3, "uni-north-main");
+    pci_create_simple(d->host_state.bus, 11 << 3, "uni-north");
 #endif
 
     sysbus_mmio_map(s, 0, 0xf2800000);
@@ -170,8 +170,8 @@ PCIBus *pci_pmac_init(qemu_irq *pic)
 #endif
 
     /* Uninorth AGP bus */
-    pci_create_simple(d->host_state.bus, 11 << 3, "uni-north-AGP");
-    dev = qdev_create(NULL, "uni-north-AGP");
+    pci_create_simple(d->host_state.bus, 11 << 3, "uni-north-agp");
+    dev = qdev_create(NULL, "uni-north-agp");
     qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     sysbus_mmio_map(s, 0, 0xf0800000);
@@ -180,8 +180,8 @@ PCIBus *pci_pmac_init(qemu_irq *pic)
     /* Uninorth internal bus */
 #if 0
     /* XXX: not needed for now */
-    pci_create_simple(d->host_state.bus, 14 << 3, "uni-north-internal");
-    dev = qdev_create(NULL, "uni-north-internal");
+    pci_create_simple(d->host_state.bus, 14 << 3, "uni-north-pci");
+    dev = qdev_create(NULL, "uni-north-pci");
     qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     sysbus_mmio_map(s, 0, 0xf4800000);
@@ -260,7 +260,7 @@ static int unin_internal_pci_host_init(PCIDevice *d)
 }
 
 static PCIDeviceInfo unin_main_pci_host_info = {
-    .qdev.name = "uni-north-main",
+    .qdev.name = "uni-north",
     .qdev.size = sizeof(PCIDevice),
     .init      = unin_main_pci_host_init,
 };
@@ -272,29 +272,29 @@ static PCIDeviceInfo dec_21154_pci_host_info = {
 };
 
 static PCIDeviceInfo unin_agp_pci_host_info = {
-    .qdev.name = "uni-north-AGP",
+    .qdev.name = "uni-north-agp",
     .qdev.size = sizeof(PCIDevice),
     .init      = unin_agp_pci_host_init,
 };
 
 static PCIDeviceInfo unin_internal_pci_host_info = {
-    .qdev.name = "uni-north-internal",
+    .qdev.name = "uni-north-pci",
     .qdev.size = sizeof(PCIDevice),
     .init      = unin_internal_pci_host_init,
 };
 
 static void unin_register_devices(void)
 {
-    sysbus_register_dev("uni-north-main", sizeof(UNINState),
+    sysbus_register_dev("uni-north", sizeof(UNINState),
                         pci_unin_main_init_device);
     pci_qdev_register(&unin_main_pci_host_info);
     sysbus_register_dev("dec-21154", sizeof(UNINState),
                         pci_dec_21154_init_device);
     pci_qdev_register(&dec_21154_pci_host_info);
-    sysbus_register_dev("uni-north-AGP", sizeof(UNINState),
+    sysbus_register_dev("uni-north-agp", sizeof(UNINState),
                         pci_unin_agp_init_device);
     pci_qdev_register(&unin_agp_pci_host_info);
-    sysbus_register_dev("uni-north-internal", sizeof(UNINState),
+    sysbus_register_dev("uni-north-pci", sizeof(UNINState),
                         pci_unin_internal_init_device);
     pci_qdev_register(&unin_internal_pci_host_info);
 }

hw/usb-net.c

@@ -1420,8 +1420,7 @@ static void usbnet_cleanup(VLANClientState *nc)
 {
     USBNetState *s = DO_UPCAST(NICState, nc, nc)->opaque;
 
-    rndis_clear_responsequeue(s);
-    qemu_free(s);
+    s->nic = NULL;
 }
 
 static void usb_net_handle_destroy(USBDevice *dev)
@@ -1429,9 +1428,18 @@ static void usb_net_handle_destroy(USBDevice *dev)
     USBNetState *s = (USBNetState *) dev;
 
     /* TODO: remove the nd_table[] entry */
+    rndis_clear_responsequeue(s);
     qemu_del_vlan_client(&s->nic->nc);
 }
 
+static NetClientInfo net_usbnet_info = {
+    .type = NET_CLIENT_TYPE_NIC,
+    .size = sizeof(NICState),
+    .can_receive = usbnet_can_receive,
+    .receive = usbnet_receive,
+    .cleanup = usbnet_cleanup,
+};
+
 static int usb_net_initfn(USBDevice *dev)
 {
     USBNetState *s = DO_UPCAST(USBNetState, dev, dev);
@@ -1447,43 +1455,45 @@ static int usb_net_initfn(USBDevice *dev)
     s->media_state = 0;	/* NDIS_MEDIA_STATE_CONNECTED */;
     s->filter = 0;
     s->vendorid = 0x1234;
+
+    qemu_macaddr_default_if_unset(&s->conf.macaddr);
+    s->nic = qemu_new_nic(&net_usbnet_info, &s->conf,
+                          s->dev.qdev.info->name, s->dev.qdev.id, s);
+    qemu_format_nic_info_str(&s->nic->nc, s->conf.macaddr.a);
+    snprintf(s->usbstring_mac, sizeof(s->usbstring_mac),
+             "%02x%02x%02x%02x%02x%02x",
+             0x40,
+             s->conf.macaddr.a[1],
+             s->conf.macaddr.a[2],
+             s->conf.macaddr.a[3],
+             s->conf.macaddr.a[4],
+             s->conf.macaddr.a[5]);
+
     return 0;
 }
 
-static NetClientInfo net_usbnet_info = {
-    .type = NET_CLIENT_TYPE_NIC,
-    .size = sizeof(NICState),
-    .can_receive = usbnet_can_receive,
-    .receive = usbnet_receive,
-    .cleanup = usbnet_cleanup,
-};
-
-USBDevice *usb_net_init(NICInfo *nd)
+static USBDevice *usb_net_init(const char *cmdline)
 {
     USBDevice *dev;
-    USBNetState *s;
+    QemuOpts *opts;
+    int idx;
 
-    dev = usb_create_simple(NULL /* FIXME */, "usb-net");
-    s = DO_UPCAST(USBNetState, dev, dev);
+    opts = qemu_opts_parse(&qemu_net_opts, cmdline, NULL);
+    if (!opts) {
+        return NULL;
+    }
+    qemu_opt_set(opts, "type", "nic");
+    qemu_opt_set(opts, "model", "usb");
 
-    memcpy(s->conf.macaddr.a, nd->macaddr, sizeof(nd->macaddr));
-    s->conf.vlan = nd->vlan;
-    s->conf.peer = nd->netdev;
+    idx = net_client_init(NULL, opts, 0);
+    if (idx == -1) {
+        return NULL;
+    }
 
-    s->nic = qemu_new_nic(&net_usbnet_info, &s->conf,
-                          nd->model, nd->name, s);
-
-    qemu_format_nic_info_str(&s->nic->nc, s->conf.macaddr.a);
-
-    snprintf(s->usbstring_mac, sizeof(s->usbstring_mac),
-                    "%02x%02x%02x%02x%02x%02x",
-                    0x40, s->conf.macaddr.a[1], s->conf.macaddr.a[2],
-                    s->conf.macaddr.a[3], s->conf.macaddr.a[4], s->conf.macaddr.a[5]);
-    fprintf(stderr, "usbnet: initialized mac %02x:%02x:%02x:%02x:%02x:%02x\n",
-                    s->conf.macaddr.a[0], s->conf.macaddr.a[1], s->conf.macaddr.a[2],
-                    s->conf.macaddr.a[3], s->conf.macaddr.a[4], s->conf.macaddr.a[5]);
-
-    return (USBDevice *) s;
+    dev = usb_create(NULL /* FIXME */, "usb-net");
+    qdev_set_nic_properties(&dev->qdev, &nd_table[idx]);
+    qdev_init_nofail(&dev->qdev);
+    return dev;
 }
 
 static struct USBDeviceInfo net_info = {
@@ -1496,6 +1506,12 @@ static struct USBDeviceInfo net_info = {
     .handle_control = usb_net_handle_control,
     .handle_data    = usb_net_handle_data,
     .handle_destroy = usb_net_handle_destroy,
+    .usbdevice_name = "net",
+    .usbdevice_init = usb_net_init,
+    .qdev.props     = (Property[]) {
+        DEFINE_NIC_PROPERTIES(USBNetState, conf),
+        DEFINE_PROP_END_OF_LIST(),
+    }
 };
 
 static void usb_net_register_devices(void)

hw/usb-serial.c

@@ -497,12 +497,28 @@ static int usb_serial_can_read(void *opaque)
 static void usb_serial_read(void *opaque, const uint8_t *buf, int size)
 {
     USBSerialState *s = opaque;
-    int first_size = RECV_BUF - s->recv_ptr;
-    if (first_size > size)
-        first_size = size;
-    memcpy(s->recv_buf + s->recv_ptr + s->recv_used, buf, first_size);
-    if (size > first_size)
-        memcpy(s->recv_buf, buf + first_size, size - first_size);
+    int first_size, start;
+
+    /* room in the buffer? */
+    if (size > (RECV_BUF - s->recv_used))
+        size = RECV_BUF - s->recv_used;
+
+    start = s->recv_ptr + s->recv_used;
+    if (start < RECV_BUF) {
+        /* copy data to end of buffer */
+        first_size = RECV_BUF - start;
+        if (first_size > size)
+            first_size = size;
+
+        memcpy(s->recv_buf + start, buf, first_size);
+
+        /* wrap around to front if needed */
+        if (size > first_size)
+            memcpy(s->recv_buf, buf + first_size, size - first_size);
+    } else {
+        start -= RECV_BUF;
+        memcpy(s->recv_buf + start, buf, size);
+    }
     s->recv_used += size;
 }
 
@@ -583,7 +599,7 @@ static USBDevice *usb_serial_init(const char *filename)
         qdev_prop_set_uint16(&dev->qdev, "vendorid", vendorid);
     if (productid)
         qdev_prop_set_uint16(&dev->qdev, "productid", productid);
-    qdev_init(&dev->qdev);
+    qdev_init_nofail(&dev->qdev);
 
     return dev;
 }
@@ -599,7 +615,7 @@ static USBDevice *usb_braille_init(const char *unused)
 
     dev = usb_create(NULL /* FIXME */, "usb-braille");
     qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);
-    qdev_init(&dev->qdev);
+    qdev_init_nofail(&dev->qdev);
 
     return dev;
 }

hw/usb-uhci.c

@@ -677,9 +677,6 @@ static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_
 
     ret = async->packet.len;
 
-    if (td->ctrl & TD_CTRL_IOC)
-        *int_mask |= 0x01;
-
     if (td->ctrl & TD_CTRL_IOS)
         td->ctrl &= ~TD_CTRL_ACTIVE;
 
@@ -693,6 +690,8 @@ static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_
        here.  The docs are somewhat unclear, but win2k relies on this
        behavior.  */
     td->ctrl &= ~(TD_CTRL_ACTIVE | TD_CTRL_NAK);
+    if (td->ctrl & TD_CTRL_IOC)
+        *int_mask |= 0x01;
 
     if (pid == USB_TOKEN_IN) {
         if (len > max_len) {
@@ -750,6 +749,8 @@ out:
         if (err == 0) {
             td->ctrl &= ~TD_CTRL_ACTIVE;
             s->status |= UHCI_STS_USBERR;
+            if (td->ctrl & TD_CTRL_IOC)
+                *int_mask |= 0x01;
             uhci_update_irq(s);
         }
     }

hw/usb.h

@@ -258,9 +258,6 @@ void usb_host_info(Monitor *mon);
 /* usb-hid.c */
 void usb_hid_datain_cb(USBDevice *dev, void *opaque, void (*datain)(void *));
 
-/* usb-net.c */
-USBDevice *usb_net_init(NICInfo *nd);
-
 /* usb-bt.c */
 USBDevice *usb_bt_init(HCIInfo *hci);
 

hw/vga-isa.c

@@ -42,11 +42,7 @@ int isa_vga_init(void)
     s->ds = graphic_console_init(s->update, s->invalidate,
                                  s->screen_dump, s->text_update, s);
 
-#ifdef CONFIG_BOCHS_VBE
-    /* XXX: use optimized standard vga accesses */
-    cpu_register_physical_memory(VBE_DISPI_LFB_PHYSICAL_ADDRESS,
-                                 VGA_RAM_SIZE, s->vram_offset);
-#endif
+    vga_init_vbe(s);
     /* ROM BIOS */
     rom_add_vga(VGABIOS_FILENAME);
     return 0;

hw/vga-pci.c

@@ -106,12 +106,7 @@ static int pci_vga_initfn(PCIDevice *dev)
                          PCI_BASE_ADDRESS_MEM_PREFETCH, vga_map);
      }
 
-#ifdef CONFIG_BOCHS_VBE
-    /* XXX: use optimized standard vga accesses */
-    cpu_register_physical_memory(VBE_DISPI_LFB_PHYSICAL_ADDRESS,
-                                 VGA_RAM_SIZE, s->vram_offset);
-#endif
-
+    vga_init_vbe(s);
      /* ROM BIOS */
      rom_add_vga(VGABIOS_FILENAME);
      return 0;

hw/vga.c

@@ -1581,6 +1581,14 @@ static void vga_sync_dirty_bitmap(VGACommonState *s)
         cpu_physical_sync_dirty_bitmap(isa_mem_base + 0xa0000, 0xa8000);
         cpu_physical_sync_dirty_bitmap(isa_mem_base + 0xa8000, 0xb0000);
     }
+
+#ifdef CONFIG_BOCHS_VBE
+    if (s->vbe_mapped) {
+        cpu_physical_sync_dirty_bitmap(VBE_DISPI_LFB_PHYSICAL_ADDRESS,
+                                       VBE_DISPI_LFB_PHYSICAL_ADDRESS + s->vram_size);
+    }
+#endif
+
 }
 
 void vga_dirty_log_start(VGACommonState *s)
@@ -1592,6 +1600,35 @@ void vga_dirty_log_start(VGACommonState *s)
         kvm_log_start(isa_mem_base + 0xa0000, 0x8000);
         kvm_log_start(isa_mem_base + 0xa8000, 0x8000);
     }
+
+#ifdef CONFIG_BOCHS_VBE
+    if (kvm_enabled() && s->vbe_mapped) {
+        kvm_log_start(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
+    }
+#endif
+}
+
+void vga_dirty_log_stop(VGACommonState *s)
+{
+    if (kvm_enabled() && s->map_addr)
+	kvm_log_stop(s->map_addr, s->map_end - s->map_addr);
+
+    if (kvm_enabled() && s->lfb_vram_mapped) {
+	kvm_log_stop(isa_mem_base + 0xa0000, 0x80000);
+	kvm_log_stop(isa_mem_base + 0xa8000, 0x80000);
+    }
+
+#ifdef CONFIG_BOCHS_VBE
+    if (kvm_enabled() && s->vbe_mapped) {
+	kvm_log_stop(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
+    }
+#endif
+}
+
+void vga_dirty_log_restart(VGACommonState *s)
+{
+    vga_dirty_log_stop(s);
+    vga_dirty_log_start(s);
 }
 
 /*
@@ -2294,6 +2331,15 @@ void vga_init(VGACommonState *s)
     qemu_register_coalesced_mmio(isa_mem_base + 0x000a0000, 0x20000);
 }
 
+void vga_init_vbe(VGACommonState *s)
+{
+#ifdef CONFIG_BOCHS_VBE
+    /* XXX: use optimized standard vga accesses */
+    cpu_register_physical_memory(VBE_DISPI_LFB_PHYSICAL_ADDRESS,
+                                 VGA_RAM_SIZE, s->vram_offset);
+    s->vbe_mapped = 1;
+#endif 
+}
 /********************************************************/
 /* vga screen dump */
 

hw/vga_int.h

@@ -71,8 +71,8 @@
     uint16_t vbe_regs[VBE_DISPI_INDEX_NB];      \
     uint32_t vbe_start_addr;                    \
     uint32_t vbe_line_offset;                   \
-    uint32_t vbe_bank_mask;
-
+    uint32_t vbe_bank_mask;			\
+    int vbe_mapped;
 #else
 
 #define VGA_STATE_COMMON_BOCHS_VBE
@@ -194,6 +194,8 @@ void vga_init(VGACommonState *s);
 void vga_common_reset(VGACommonState *s);
 
 void vga_dirty_log_start(VGACommonState *s);
+void vga_dirty_log_stop(VGACommonState *s);
+void vga_dirty_log_restart(VGACommonState *s);
 
 extern const VMStateDescription vmstate_vga_common;
 uint32_t vga_ioport_read(void *opaque, uint32_t addr);
@@ -217,6 +219,7 @@ void vga_draw_cursor_line_32(uint8_t *d1, const uint8_t *src1,
                              unsigned int color_xor);
 
 int vga_ioport_invalid(VGACommonState *s, uint32_t addr);
+void vga_init_vbe(VGACommonState *s);
 
 extern const uint8_t sr_mask[8];
 extern const uint8_t gr_mask[16];

hw/virtio-blk.c

@@ -272,7 +272,7 @@ static void do_multiwrite(BlockDriverState *bs, BlockRequest *blkreq,
     if (ret != 0) {
         for (i = 0; i < num_writes; i++) {
             if (blkreq[i].error) {
-                virtio_blk_req_complete(blkreq[i].opaque, VIRTIO_BLK_S_IOERR);
+                virtio_blk_rw_complete(blkreq[i].opaque, -EIO);
             }
         }
     }
@@ -316,7 +316,46 @@ static void virtio_blk_handle_read(VirtIOBlockReq *req)
     acb = bdrv_aio_readv(req->dev->bs, req->out->sector, &req->qiov,
                          req->qiov.size / 512, virtio_blk_rw_complete, req);
     if (!acb) {
-        virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR);
+        virtio_blk_rw_complete(req, -EIO);
+    }
+}
+
+typedef struct MultiReqBuffer {
+    BlockRequest        blkreq[32];
+    int                 num_writes;
+    BlockDriverState    *old_bs;
+} MultiReqBuffer;
+
+static void virtio_blk_handle_request(VirtIOBlockReq *req,
+    MultiReqBuffer *mrb)
+{
+    if (req->elem.out_num < 1 || req->elem.in_num < 1) {
+        fprintf(stderr, "virtio-blk missing headers\n");
+        exit(1);
+    }
+
+    if (req->elem.out_sg[0].iov_len < sizeof(*req->out) ||
+        req->elem.in_sg[req->elem.in_num - 1].iov_len < sizeof(*req->in)) {
+        fprintf(stderr, "virtio-blk header not in correct element\n");
+        exit(1);
+    }
+
+    req->out = (void *)req->elem.out_sg[0].iov_base;
+    req->in = (void *)req->elem.in_sg[req->elem.in_num - 1].iov_base;
+
+    if (req->out->type & VIRTIO_BLK_T_FLUSH) {
+        virtio_blk_handle_flush(req);
+    } else if (req->out->type & VIRTIO_BLK_T_SCSI_CMD) {
+        virtio_blk_handle_scsi(req);
+    } else if (req->out->type & VIRTIO_BLK_T_OUT) {
+        qemu_iovec_init_external(&req->qiov, &req->elem.out_sg[1],
+                                 req->elem.out_num - 1);
+        virtio_blk_handle_write(mrb->blkreq, &mrb->num_writes,
+            req, &mrb->old_bs);
+    } else {
+        qemu_iovec_init_external(&req->qiov, &req->elem.in_sg[0],
+                                 req->elem.in_num - 1);
+        virtio_blk_handle_read(req);
     }
 }
 
@@ -324,42 +363,17 @@ static void virtio_blk_handle_output(VirtIODevice *vdev, VirtQueue *vq)
 {
     VirtIOBlock *s = to_virtio_blk(vdev);
     VirtIOBlockReq *req;
-    BlockRequest blkreq[32];
-    int num_writes = 0;
-    BlockDriverState *old_bs = NULL;
+    MultiReqBuffer mrb = {
+        .num_writes = 0,
+        .old_bs = NULL,
+    };
 
     while ((req = virtio_blk_get_request(s))) {
-        if (req->elem.out_num < 1 || req->elem.in_num < 1) {
-            fprintf(stderr, "virtio-blk missing headers\n");
-            exit(1);
-        }
-
-        if (req->elem.out_sg[0].iov_len < sizeof(*req->out) ||
-            req->elem.in_sg[req->elem.in_num - 1].iov_len < sizeof(*req->in)) {
-            fprintf(stderr, "virtio-blk header not in correct element\n");
-            exit(1);
-        }
-
-        req->out = (void *)req->elem.out_sg[0].iov_base;
-        req->in = (void *)req->elem.in_sg[req->elem.in_num - 1].iov_base;
-
-        if (req->out->type & VIRTIO_BLK_T_FLUSH) {
-            virtio_blk_handle_flush(req);
-        } else if (req->out->type & VIRTIO_BLK_T_SCSI_CMD) {
-            virtio_blk_handle_scsi(req);
-        } else if (req->out->type & VIRTIO_BLK_T_OUT) {
-            qemu_iovec_init_external(&req->qiov, &req->elem.out_sg[1],
-                                     req->elem.out_num - 1);
-            virtio_blk_handle_write(blkreq, &num_writes, req, &old_bs);
-        } else {
-            qemu_iovec_init_external(&req->qiov, &req->elem.in_sg[0],
-                                     req->elem.in_num - 1);
-            virtio_blk_handle_read(req);
-        }
+        virtio_blk_handle_request(req, &mrb);
     }
 
-    if (num_writes > 0) {
-        do_multiwrite(old_bs, blkreq, num_writes);
+    if (mrb.num_writes > 0) {
+        do_multiwrite(mrb.old_bs, mrb.blkreq, mrb.num_writes);
     }
 
     /*
@@ -373,6 +387,10 @@ static void virtio_blk_dma_restart_bh(void *opaque)
 {
     VirtIOBlock *s = opaque;
     VirtIOBlockReq *req = s->rq;
+    MultiReqBuffer mrb = {
+        .num_writes = 0,
+        .old_bs = NULL,
+    };
 
     qemu_bh_delete(s->bh);
     s->bh = NULL;
@@ -380,10 +398,13 @@ static void virtio_blk_dma_restart_bh(void *opaque)
     s->rq = NULL;
 
     while (req) {
-        bdrv_aio_writev(req->dev->bs, req->out->sector, &req->qiov,
-            req->qiov.size / 512, virtio_blk_rw_complete, req);
+        virtio_blk_handle_request(req, &mrb);
         req = req->next;
     }
+
+    if (mrb.num_writes > 0) {
+        do_multiwrite(mrb.old_bs, mrb.blkreq, mrb.num_writes);
+    }
 }
 
 static void virtio_blk_dma_restart_cb(void *opaque, int running, int reason)

hw/virtio-net.c

@@ -384,7 +384,15 @@ static int virtio_net_has_buffers(VirtIONet *n, int bufsize)
         (n->mergeable_rx_bufs &&
          !virtqueue_avail_bytes(n->rx_vq, bufsize, 0))) {
         virtio_queue_set_notification(n->rx_vq, 1);
-        return 0;
+
+        /* To avoid a race condition where the guest has made some buffers
+         * available after the above check but before notification was
+         * enabled, check for available buffers again.
+         */
+        if (virtio_queue_empty(n->rx_vq) ||
+            (n->mergeable_rx_bufs &&
+             !virtqueue_avail_bytes(n->rx_vq, bufsize, 0)))
+            return 0;
     }
 
     virtio_queue_set_notification(n->rx_vq, 0);

hw/virtio-pci.c

@@ -372,7 +372,7 @@ static void virtio_write_config(PCIDevice *pci_dev, uint32_t address,
 
     if (PCI_COMMAND == address) {
         if (!(val & PCI_COMMAND_MASTER)) {
-            proxy->vdev->status &= !VIRTIO_CONFIG_S_DRIVER_OK;
+            proxy->vdev->status &= ~VIRTIO_CONFIG_S_DRIVER_OK;
         }
     }
 
@@ -518,14 +518,6 @@ static int virtio_net_init_pci(PCIDevice *pci_dev)
 
     /* make the actual value visible */
     proxy->nvectors = vdev->nvectors;
-
-    if (!pci_dev->qdev.hotplugged) {
-        static int loaded = 0;
-        if (!loaded) {
-            rom_add_option("pxe-virtio.bin");
-            loaded = 1;
-        }
-    }
     return 0;
 }
 
@@ -569,6 +561,7 @@ static PCIDeviceInfo virtio_info[] = {
         .qdev.size  = sizeof(VirtIOPCIProxy),
         .init       = virtio_net_init_pci,
         .exit       = virtio_net_exit_pci,
+        .romfile    = "pxe-virtio.bin",
         .qdev.props = (Property[]) {
             DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 3),
             DEFINE_NIC_PROPERTIES(VirtIOPCIProxy, nic),

hw/vmware_vga.c

@@ -67,6 +67,11 @@ struct vmsvga_state_s {
     int syncing;
     int fb_size;
 
+    ram_addr_t fifo_offset;
+    uint8_t *fifo_ptr;
+    unsigned int fifo_size;
+    target_phys_addr_t fifo_base;
+
     union {
         uint32_t *fifo;
         struct __attribute__((__packed__)) {
@@ -462,7 +467,7 @@ struct vmsvga_cursor_definition_s {
     int hot_x;
     int hot_y;
     uint32_t mask[1024];
-    uint32_t image[1024];
+    uint32_t image[4096];
 };
 
 #define SVGA_BITMAP_SIZE(w, h)		((((w) + 31) >> 5) * (h))
@@ -557,6 +562,13 @@ static void vmsvga_fifo_run(struct vmsvga_state_s *s)
             cursor.height = y = vmsvga_fifo_read(s);
             vmsvga_fifo_read(s);
             cursor.bpp = vmsvga_fifo_read(s);
+
+	    if (SVGA_BITMAP_SIZE(x, y) > sizeof cursor.mask ||
+		SVGA_PIXMAP_SIZE(x, y, cursor.bpp) > sizeof cursor.image) {
+		    args = SVGA_BITMAP_SIZE(x, y) + SVGA_PIXMAP_SIZE(x, y, cursor.bpp);
+		    goto badcmd;
+	    }
+
             for (args = 0; args < SVGA_BITMAP_SIZE(x, y); args ++)
                 cursor.mask[args] = vmsvga_fifo_read_raw(s);
             for (args = 0; args < SVGA_PIXMAP_SIZE(x, y, cursor.bpp); args ++)
@@ -680,7 +692,7 @@ static uint32_t vmsvga_value_read(void *opaque, uint32_t address)
         return 0x0;
 
     case SVGA_REG_VRAM_SIZE:
-        return s->vga.vram_size - SVGA_FIFO_SIZE;
+        return s->vga.vram_size;
 
     case SVGA_REG_FB_SIZE:
         return s->fb_size;
@@ -701,10 +713,10 @@ static uint32_t vmsvga_value_read(void *opaque, uint32_t address)
         return caps;
 
     case SVGA_REG_MEM_START:
-        return s->vram_base + s->vga.vram_size - SVGA_FIFO_SIZE;
+        return s->fifo_base;
 
     case SVGA_REG_MEM_SIZE:
-        return SVGA_FIFO_SIZE;
+        return s->fifo_size;
 
     case SVGA_REG_CONFIG_DONE:
         return s->config;
@@ -766,8 +778,12 @@ static void vmsvga_value_write(void *opaque, uint32_t address, uint32_t value)
         s->height = -1;
         s->invalidated = 1;
         s->vga.invalidate(&s->vga);
-        if (s->enable)
-            s->fb_size = ((s->depth + 7) >> 3) * s->new_width * s->new_height;
+        if (s->enable) {
+	  s->fb_size = ((s->depth + 7) >> 3) * s->new_width * s->new_height;
+	  vga_dirty_log_stop(&s->vga);
+	} else {
+	  vga_dirty_log_start(&s->vga);
+	}
         break;
 
     case SVGA_REG_WIDTH:
@@ -790,7 +806,7 @@ static void vmsvga_value_write(void *opaque, uint32_t address, uint32_t value)
 
     case SVGA_REG_CONFIG_DONE:
         if (value) {
-            s->fifo = (uint32_t *) &s->vga.vram_ptr[s->vga.vram_size - SVGA_FIFO_SIZE];
+            s->fifo = (uint32_t *) s->fifo_ptr;
             /* Check range and alignment.  */
             if ((CMD(min) | CMD(max) |
                         CMD(next_cmd) | CMD(stop)) & 3)
@@ -910,8 +926,8 @@ static void vmsvga_reset(struct vmsvga_state_s *s)
     s->width = -1;
     s->height = -1;
     s->svgaid = SVGA_ID;
-    s->depth = 24;
-    s->bypp = (s->depth + 7) >> 3;
+    s->depth = ds_get_bits_per_pixel(s->vga.ds);
+    s->bypp = ds_get_bytes_per_pixel(s->vga.ds);
     s->cursor.on = 0;
     s->redraw_fifo_first = 0;
     s->redraw_fifo_last = 0;
@@ -943,6 +959,8 @@ static void vmsvga_reset(struct vmsvga_state_s *s)
         break;
     }
     s->syncing = 0;
+
+    vga_dirty_log_start(&s->vga);
 }
 
 static void vmsvga_invalidate_display(void *opaque)
@@ -1059,7 +1077,7 @@ static int vmsvga_post_load(void *opaque, int version_id)
 
     s->invalidated = 1;
     if (s->config)
-        s->fifo = (uint32_t *) &s->vga.vram_ptr[s->vga.vram_size - SVGA_FIFO_SIZE];
+        s->fifo = (uint32_t *) s->fifo_ptr;
 
     return 0;
 }
@@ -1109,23 +1127,25 @@ static void vmsvga_init(struct vmsvga_state_s *s, int vga_ram_size)
     s->scratch_size = SVGA_SCRATCH_SIZE;
     s->scratch = qemu_malloc(s->scratch_size * 4);
 
-    vmsvga_reset(s);
-
-    vga_common_init(&s->vga, vga_ram_size);
-    vga_init(&s->vga);
-    vmstate_register(0, &vmstate_vga_common, &s->vga);
-
     s->vga.ds = graphic_console_init(vmsvga_update_display,
                                      vmsvga_invalidate_display,
                                      vmsvga_screen_dump,
                                      vmsvga_text_update, s);
 
-#ifdef CONFIG_BOCHS_VBE
-    /* XXX: use optimized standard vga accesses */
-    cpu_register_physical_memory(VBE_DISPI_LFB_PHYSICAL_ADDRESS,
-                                 vga_ram_size, s->vga.vram_offset);
-#endif
-     rom_add_vga(VGABIOS_FILENAME);
+
+    s->fifo_size = SVGA_FIFO_SIZE;
+    s->fifo_offset = qemu_ram_alloc(s->fifo_size);
+    s->fifo_ptr = qemu_get_ram_ptr(s->fifo_offset);
+
+    vga_common_init(&s->vga, vga_ram_size);
+    vga_init(&s->vga);
+    vmstate_register(0, &vmstate_vga_common, &s->vga);
+
+    vga_init_vbe(&s->vga);
+
+    rom_add_vga(VGABIOS_FILENAME);
+
+    vmsvga_reset(s);
 }
 
 static void pci_vmsvga_map_ioport(PCIDevice *pci_dev, int region_num,
@@ -1164,6 +1184,23 @@ static void pci_vmsvga_map_mem(PCIDevice *pci_dev, int region_num,
 #endif
     cpu_register_physical_memory(s->vram_base, s->vga.vram_size,
                     iomemtype);
+
+    s->vga.map_addr = addr;
+    s->vga.map_end = addr + s->vga.vram_size;
+    vga_dirty_log_restart(&s->vga);
+}
+
+static void pci_vmsvga_map_fifo(PCIDevice *pci_dev, int region_num,
+                pcibus_t addr, pcibus_t size, int type)
+{
+    struct pci_vmsvga_state_s *d = (struct pci_vmsvga_state_s *) pci_dev;
+    struct vmsvga_state_s *s = &d->chip;
+    ram_addr_t iomemtype;
+
+    s->fifo_base = addr;
+    iomemtype = s->fifo_offset | IO_MEM_RAM;
+    cpu_register_physical_memory(s->fifo_base, s->fifo_size,
+                    iomemtype);
 }
 
 static int pci_vmsvga_initfn(PCIDevice *dev)
@@ -1189,6 +1226,9 @@ static int pci_vmsvga_initfn(PCIDevice *dev)
     pci_register_bar(&s->card, 1, VGA_RAM_SIZE,
                     PCI_BASE_ADDRESS_MEM_PREFETCH, pci_vmsvga_map_mem);
 
+    pci_register_bar(&s->card, 2, SVGA_FIFO_SIZE,
+		     PCI_BASE_ADDRESS_MEM_PREFETCH, pci_vmsvga_map_fifo);
+
     vmsvga_init(&s->chip, VGA_RAM_SIZE);
 
     return 0;

json-lexer.c

@@ -54,6 +54,9 @@ enum json_lexer_state {
     IN_ESCAPE,
     IN_ESCAPE_L,
     IN_ESCAPE_LL,
+    IN_ESCAPE_I,
+    IN_ESCAPE_I6,
+    IN_ESCAPE_I64,
     IN_ESCAPE_DONE,
     IN_WHITESPACE,
     IN_OPERATOR_DONE,
@@ -223,6 +226,18 @@ static const uint8_t json_lexer[][256] =  {
         ['l'] = IN_ESCAPE_LL,
     },
 
+    [IN_ESCAPE_I64] = {
+        ['d'] = IN_ESCAPE_DONE,
+    },
+
+    [IN_ESCAPE_I6] = {
+        ['4'] = IN_ESCAPE_I64,
+    },
+
+    [IN_ESCAPE_I] = {
+        ['6'] = IN_ESCAPE_I6,
+    },
+
     [IN_ESCAPE] = {
         ['d'] = IN_ESCAPE_DONE,
         ['i'] = IN_ESCAPE_DONE,
@@ -230,6 +245,7 @@ static const uint8_t json_lexer[][256] =  {
         ['s'] = IN_ESCAPE_DONE,
         ['f'] = IN_ESCAPE_DONE,
         ['l'] = IN_ESCAPE_L,
+        ['I'] = IN_ESCAPE_I,
     },
 
     /* top level rule */

json-parser.c

@@ -266,7 +266,7 @@ static int parse_pair(JSONParserContext *ctxt, QDict *dict, QList **tokens, va_l
 
     peek = qlist_peek(working);
     key = parse_value(ctxt, &working, ap);
-    if (qobject_type(key) != QTYPE_QSTRING) {
+    if (!key || qobject_type(key) != QTYPE_QSTRING) {
         parse_error(ctxt, peek, "key is not a string in object");
         goto out;
     }
@@ -476,7 +476,8 @@ static QObject *parse_escape(JSONParserContext *ctxt, QList **tokens, va_list *a
         obj = QOBJECT(qint_from_int(va_arg(*ap, int)));
     } else if (token_is_escape(token, "%ld")) {
         obj = QOBJECT(qint_from_int(va_arg(*ap, long)));
-    } else if (token_is_escape(token, "%lld")) {
+    } else if (token_is_escape(token, "%lld") ||
+               token_is_escape(token, "%I64d")) {
         obj = QOBJECT(qint_from_int(va_arg(*ap, long long)));
     } else if (token_is_escape(token, "%s")) {
         obj = QOBJECT(qstring_from_str(va_arg(*ap, const char *)));

linux-user/main.c

@@ -2684,7 +2684,7 @@ int main(int argc, char **argv, char **envp)
 #endif
 #elif defined(TARGET_PPC)
 #ifdef TARGET_PPC64
-        cpu_model = "970";
+        cpu_model = "970fx";
 #else
         cpu_model = "750";
 #endif

migration-unix.c

@@ -112,10 +112,6 @@ MigrationState *unix_start_outgoing_migration(Monitor *mon,
 
     socket_set_nonblock(s->fd);
 
-    if (!detach) {
-        migrate_fd_monitor_suspend(s, mon);
-    }
-
     do {
         ret = connect(s->fd, (struct sockaddr *)&addr, sizeof(addr));
         if (ret == -1)
@@ -128,7 +124,13 @@ MigrationState *unix_start_outgoing_migration(Monitor *mon,
     if (ret < 0 && ret != -EINPROGRESS && ret != -EWOULDBLOCK) {
         dprintf("connect failed\n");
         goto err_after_open;
-    } else if (ret >= 0)
+    }
+
+    if (!detach) {
+        migrate_fd_monitor_suspend(s, mon);
+    }
+
+    if (ret >= 0)
         migrate_fd_connect(s);
 
     return &s->mig_state;

migration.c

@@ -106,7 +106,7 @@ void do_migrate_cancel(Monitor *mon, const QDict *qdict, QObject **ret_data)
         s->cancel(s);
 }
 
-void do_migrate_set_speed(Monitor *mon, const QDict *qdict, QObject **ret_data)
+void do_migrate_set_speed(Monitor *mon, const QDict *qdict)
 {
     double d;
     char *ptr;

migration.h

@@ -56,7 +56,7 @@ void do_migrate(Monitor *mon, const QDict *qdict, QObject **ret_data);
 
 void do_migrate_cancel(Monitor *mon, const QDict *qdict, QObject **ret_data);
 
-void do_migrate_set_speed(Monitor *mon, const QDict *qdict, QObject **ret_data);
+void do_migrate_set_speed(Monitor *mon, const QDict *qdict);
 
 uint64_t migrate_max_downtime(void);
 

monitor.c

@@ -140,6 +140,9 @@ static inline int monitor_ctrl_mode(const Monitor *mon)
 
 static void monitor_read_command(Monitor *mon, int show_prompt)
 {
+    if (!mon->rs)
+        return;
+
     readline_start(mon->rs, "(qemu) ", 0, monitor_command_cb, NULL);
     if (show_prompt)
         readline_show_prompt(mon->rs);
@@ -174,9 +177,6 @@ static void monitor_puts(Monitor *mon, const char *str)
 {
     char c;
 
-    if (!mon)
-        return;
-
     for(;;) {
         c = *str++;
         if (c == '\0')
@@ -192,6 +192,9 @@ static void monitor_puts(Monitor *mon, const char *str)
 
 void monitor_vprintf(Monitor *mon, const char *fmt, va_list ap)
 {
+    if (!mon)
+        return;
+
     if (mon->mc && !mon->mc->print_enabled) {
         qemu_error_new(QERR_UNDEFINED_ERROR);
     } else {
@@ -283,7 +286,8 @@ static void monitor_protocol_emitter(Monitor *mon, QObject *data)
             qobject_incref(data);
             qdict_put_obj(qmp, "return", data);
         } else {
-            qdict_put(qmp, "return", qstring_from_str("OK"));
+            /* return an empty QDict by default */
+            qdict_put(qmp, "return", qdict_new());
         }
     } else {
         /* error response */
@@ -330,13 +334,10 @@ void monitor_protocol_event(MonitorEvent event, QObject *data)
 {
     QDict *qmp;
     const char *event_name;
-    Monitor *mon = cur_mon;
+    Monitor *mon;
 
     assert(event < QEVENT_MAX);
 
-    if (!monitor_ctrl_mode(mon))
-        return;
-
     switch (event) {
         case QEVENT_DEBUG:
             event_name = "DEBUG";
@@ -361,10 +362,16 @@ void monitor_protocol_event(MonitorEvent event, QObject *data)
     qmp = qdict_new();
     timestamp_put(qmp);
     qdict_put(qmp, "event", qstring_from_str(event_name));
-    if (data)
+    if (data) {
+        qobject_incref(data);
         qdict_put_obj(qmp, "data", data);
+    }
 
-    monitor_json_emitter(mon, QOBJECT(qmp));
+    QLIST_FOREACH(mon, &mon_list, entry) {
+        if (monitor_ctrl_mode(mon)) {
+            monitor_json_emitter(mon, QOBJECT(qmp));
+        }
+    }
     QDECREF(qmp);
 }
 
@@ -864,7 +871,7 @@ static void do_eject(Monitor *mon, const QDict *qdict, QObject **ret_data)
 {
     BlockDriverState *bs;
     int force = qdict_get_int(qdict, "force");
-    const char *filename = qdict_get_str(qdict, "filename");
+    const char *filename = qdict_get_str(qdict, "device");
 
     bs = bdrv_find(filename);
     if (!bs) {
@@ -2053,14 +2060,33 @@ static void do_info_status(Monitor *mon, QObject **ret_data)
                                     vm_running, singlestep);
 }
 
+static ram_addr_t balloon_get_value(void)
+{
+    ram_addr_t actual;
+
+    if (kvm_enabled() && !kvm_has_sync_mmu()) {
+        qemu_error_new(QERR_KVM_MISSING_CAP, "synchronous MMU", "balloon");
+        return 0;
+    }
+
+    actual = qemu_balloon_status();
+    if (actual == 0) {
+        qemu_error_new(QERR_DEVICE_NOT_ACTIVE, "balloon");
+        return 0;
+    }
+
+    return actual;
+}
+
 /**
  * do_balloon(): Request VM to change its memory allocation
  */
 static void do_balloon(Monitor *mon, const QDict *qdict, QObject **ret_data)
 {
-    int value = qdict_get_int(qdict, "value");
-    ram_addr_t target = value;
-    qemu_balloon(target << 20);
+    if (balloon_get_value()) {
+        /* ballooning is active */
+        qemu_balloon(qdict_get_int(qdict, "value"));
+    }
 }
 
 static void monitor_print_balloon(Monitor *mon, const QObject *data)
@@ -2088,14 +2114,11 @@ static void do_info_balloon(Monitor *mon, QObject **ret_data)
 {
     ram_addr_t actual;
 
-    actual = qemu_balloon_status();
-    if (kvm_enabled() && !kvm_has_sync_mmu())
-        qemu_error_new(QERR_KVM_MISSING_CAP, "synchronous MMU", "balloon");
-    else if (actual == 0)
-        qemu_error_new(QERR_DEVICE_NOT_ACTIVE, "balloon");
-    else
+    actual = balloon_get_value();
+    if (actual != 0) {
         *ret_data = qobject_from_jsonf("{ 'balloon': %" PRId64 "}",
                                        (int64_t) actual);
+    }
 }
 
 static qemu_acl *find_acl(Monitor *mon, const char *name)
@@ -3479,6 +3502,7 @@ static const mon_cmd_t *monitor_parse_command(Monitor *mon,
             break;
         case 'i':
         case 'l':
+        case 'M':
             {
                 int64_t val;
 
@@ -3509,6 +3533,8 @@ static const mon_cmd_t *monitor_parse_command(Monitor *mon,
                     monitor_printf(mon, "\'%s\' has failed: ", cmdname);
                     monitor_printf(mon, "integer is for 32-bit values\n");
                     goto fail;
+                } else if (c == 'M') {
+                    val <<= 20;
                 }
                 qdict_put(qdict, key, qint_from_int(val));
             }
@@ -3844,7 +3870,7 @@ static int monitor_can_read(void *opaque)
 {
     Monitor *mon = opaque;
 
-    return (mon->suspend_cnt == 0) ? 128 : 0;
+    return (mon->suspend_cnt == 0) ? 1 : 0;
 }
 
 typedef struct CmdArgs {
@@ -3913,6 +3939,7 @@ static int check_arg(const CmdArgs *cmd_args, QDict *args)
         }
         case 'i':
         case 'l':
+        case 'M':
             if (qobject_type(value) != QTYPE_QINT) {
                 qemu_error_new(QERR_INVALID_PARAMETER_TYPE, name, "int");
                 return -1;
@@ -4050,7 +4077,7 @@ static void handle_qmp_command(JSONMessageParser *parser, QList *tokens)
                       qobject_from_jsonf("{ 'item': %s }", info_item));
     } else {
         cmd = monitor_find_command(cmd_name);
-        if (!cmd) {
+        if (!cmd || !monitor_handler_ported(cmd)) {
             qemu_error_new(QERR_COMMAND_NOT_FOUND, cmd_name);
             goto err_input;
         }

net.c

@@ -96,7 +96,7 @@ int parse_host_src_port(struct sockaddr_in *haddr,
                         struct sockaddr_in *saddr,
                         const char *input_str)
 {
-    char *str = strdup(input_str);
+    char *str = qemu_strdup(input_str);
     char *host_str = str;
     char *src_str;
     const char *src_str2;
@@ -812,9 +812,6 @@ static int net_init_nic(QemuOpts *opts,
     }
 
     nd->used = 1;
-    if (vlan) {
-        nd->vlan->nb_guest_devs++;
-    }
     nb_nics++;
 
     return idx;
@@ -1128,20 +1125,6 @@ int net_client_init(Monitor *mon, QemuOpts *opts, int is_netdev)
     return -1;
 }
 
-void net_client_uninit(NICInfo *nd)
-{
-    if (nd->vlan) {
-        nd->vlan->nb_guest_devs--;
-    }
-    nb_nics--;
-
-    qemu_free(nd->model);
-    qemu_free(nd->name);
-    qemu_free(nd->devaddr);
-
-    nd->used = 0;
-}
-
 static int net_host_check_device(const char *device)
 {
     int i;
@@ -1204,39 +1187,26 @@ void net_host_device_remove(Monitor *mon, const QDict *qdict)
     qemu_del_vlan_client(vc);
 }
 
-void net_set_boot_mask(int net_boot_mask)
-{
-    int i;
-
-    /* Only the first four NICs may be bootable */
-    net_boot_mask = net_boot_mask & 0xF;
-
-    for (i = 0; i < nb_nics; i++) {
-        if (net_boot_mask & (1 << i)) {
-            nd_table[i].bootable = 1;
-            net_boot_mask &= ~(1 << i);
-        }
-    }
-
-    if (net_boot_mask) {
-        fprintf(stderr, "Cannot boot from non-existent NIC\n");
-        exit(1);
-    }
-}
-
 void do_info_network(Monitor *mon)
 {
     VLANState *vlan;
+    VLANClientState *vc;
 
     QTAILQ_FOREACH(vlan, &vlans, next) {
-        VLANClientState *vc;
-
         monitor_printf(mon, "VLAN %d devices:\n", vlan->id);
 
         QTAILQ_FOREACH(vc, &vlan->clients, next) {
             monitor_printf(mon, "  %s: %s\n", vc->name, vc->info_str);
         }
     }
+    monitor_printf(mon, "Devices not on any VLAN:\n");
+    QTAILQ_FOREACH(vc, &non_vlan_clients, next) {
+        monitor_printf(mon, "  %s: %s", vc->name, vc->info_str);
+        if (vc->peer) {
+            monitor_printf(mon, " peer=%s", vc->peer->name);
+        }
+        monitor_printf(mon, "\n");
+    }
 }
 
 void do_set_link(Monitor *mon, const QDict *qdict)
@@ -1253,6 +1223,7 @@ void do_set_link(Monitor *mon, const QDict *qdict)
             }
         }
     }
+    vc = qemu_find_netdev(name);
 done:
 
     if (!vc) {
@@ -1289,20 +1260,41 @@ void net_cleanup(void)
     }
 }
 
-static void net_check_clients(void)
+void net_check_clients(void)
 {
     VLANState *vlan;
+    VLANClientState *vc;
+    int has_nic, has_host_dev;
 
     QTAILQ_FOREACH(vlan, &vlans, next) {
-        if (vlan->nb_guest_devs == 0 && vlan->nb_host_devs == 0)
-            continue;
-        if (vlan->nb_guest_devs == 0)
+        QTAILQ_FOREACH(vc, &vlan->clients, next) {
+            switch (vc->info->type) {
+            case NET_CLIENT_TYPE_NIC:
+                has_nic = 1;
+                break;
+            case NET_CLIENT_TYPE_SLIRP:
+            case NET_CLIENT_TYPE_TAP:
+            case NET_CLIENT_TYPE_SOCKET:
+            case NET_CLIENT_TYPE_VDE:
+                has_host_dev = 1;
+                break;
+            default: ;
+            }
+        }
+        if (has_host_dev && !has_nic)
             fprintf(stderr, "Warning: vlan %d with no nics\n", vlan->id);
-        if (vlan->nb_host_devs == 0)
+        if (has_nic && !has_host_dev)
             fprintf(stderr,
                     "Warning: vlan %d is not connected to host network\n",
                     vlan->id);
     }
+    QTAILQ_FOREACH(vc, &non_vlan_clients, next) {
+        if (!vc->peer) {
+            fprintf(stderr, "Warning: %s %s has no peer\n",
+                    vc->info->type == NET_CLIENT_TYPE_NIC ? "nic" : "netdev",
+                    vc->name);
+        }
+    }
 }
 
 static int net_init_client(QemuOpts *opts, void *dummy)
@@ -1337,8 +1329,6 @@ int net_init_clients(void)
         return -1;
     }
 
-    net_check_clients();
-
     return 0;
 }
 

net.h

@@ -76,7 +76,6 @@ struct VLANState {
     int id;
     QTAILQ_HEAD(, VLANClientState) clients;
     QTAILQ_ENTRY(VLANState) next;
-    unsigned int nb_guest_devs, nb_host_devs;
     NetQueue *send_queue;
 };
 
@@ -160,11 +159,10 @@ extern const char *legacy_tftp_prefix;
 extern const char *legacy_bootp_filename;
 
 int net_client_init(Monitor *mon, QemuOpts *opts, int is_netdev);
-void net_client_uninit(NICInfo *nd);
 int net_client_parse(QemuOptsList *opts_list, const char *str);
 int net_init_clients(void);
+void net_check_clients(void);
 void net_cleanup(void);
-void net_set_boot_mask(int boot_mask);
 void net_host_device_add(Monitor *mon, const QDict *qdict);
 void net_host_device_remove(Monitor *mon, const QDict *qdict);
 

net/slirp.c

@@ -728,10 +728,6 @@ int net_init_slirp(QemuOpts *opts,
         qemu_free(config);
     }
 
-    if (ret != -1 && vlan) {
-        vlan->nb_host_devs++;
-    }
-
     qemu_free(vnet);
 
     return ret;

net/socket.c

@@ -569,9 +569,5 @@ int net_init_socket(QemuOpts *opts,
         return -1;
     }
 
-    if (vlan) {
-        vlan->nb_host_devs++;
-    }
-
     return 0;
 }

net/tap-win32.c

@@ -714,10 +714,6 @@ int net_init_tap(QemuOpts *opts, Monitor *mon, const char *name, VLANState *vlan
         return -1;
     }
 
-    if (vlan) {
-        vlan->nb_host_devs++;
-    }
-
     return 0;
 }
 

net/tap.c

@@ -441,9 +441,5 @@ int net_init_tap(QemuOpts *opts, Monitor *mon, const char *name, VLANState *vlan
         }
     }
 
-    if (vlan) {
-        vlan->nb_host_devs++;
-    }
-
     return 0;
 }

net/vde.c

@@ -127,9 +127,5 @@ int net_init_vde(QemuOpts *opts, Monitor *mon, const char *name, VLANState *vlan
         return -1;
     }
 
-    if (vlan) {
-        vlan->nb_host_devs++;
-    }
-
     return 0;
 }

osdep.c

@@ -262,13 +262,15 @@ int qemu_pipe(int pipefd[2])
 
 #ifdef CONFIG_PIPE2
     ret = pipe2(pipefd, O_CLOEXEC);
-#else
+    if (ret != -1 || errno != ENOSYS) {
+        return ret;
+    }
+#endif
     ret = pipe(pipefd);
     if (ret == 0) {
         qemu_set_cloexec(pipefd[0]);
         qemu_set_cloexec(pipefd[1]);
     }
-#endif
 
     return ret;
 }
@@ -283,12 +285,14 @@ int qemu_socket(int domain, int type, int protocol)
 
 #ifdef SOCK_CLOEXEC
     ret = socket(domain, type | SOCK_CLOEXEC, protocol);
-#else
+    if (ret != -1 || errno != EINVAL) {
+        return ret;
+    }
+#endif
     ret = socket(domain, type, protocol);
     if (ret >= 0) {
         qemu_set_cloexec(ret);
     }
-#endif
 
     return ret;
 }
@@ -302,12 +306,14 @@ int qemu_accept(int s, struct sockaddr *addr, socklen_t *addrlen)
 
 #ifdef CONFIG_ACCEPT4
     ret = accept4(s, addr, addrlen, SOCK_CLOEXEC);
-#else
+    if (ret != -1 || errno != ENOSYS) {
+        return ret;
+    }
+#endif
     ret = accept(s, addr, addrlen);
     if (ret >= 0) {
         qemu_set_cloexec(ret);
     }
-#endif
 
     return ret;
 }

pc-bios/README

@@ -1,4 +1,5 @@
-- The PC BIOS comes from the Bochs project (http://bochs.sourceforge.net/).
+- SeaBIOS (bios.bin) is the successor of pc bios.
+  See http://www.seabios.org/ for more information.
 
 - The VGA BIOS and the Cirrus VGA BIOS come from the LGPL VGA bios
   project (http://www.nongnu.org/vgabios/).

pc-bios/optionrom/linuxboot.S

@@ -79,24 +79,21 @@ copy_kernel:
 	   mode, so let's get into 32 bit mode, write the kernel and jump
 	   back again. */
 
-	/* Set DS to SS+SP - 0x10, so we can write our GDT descriptor there */
-	mov		%ss, %eax
-	shl		$4, %eax
-	add		%esp, %eax
-	sub		$0x10, %eax
-	shr		$4, %eax
+	/* Reserve space on the stack for our GDT descriptor. */
+	mov		%esp, %ebp
+	sub		$16, %esp
 
 	/* Now create the GDT descriptor */
+	movw		$((3 * 8) - 1), -16(%bp)
 	mov		%cs, %eax
+	movzwl		%ax, %eax
 	shl		$4, %eax
-	movw		$((3 * 8) - 1), %bx
-	movw		%bx, %gs:0
-	movl		$gdt, %ebx
-	add		%eax, %ebx
-	movl		%ebx, %gs:2
+	addl		$gdt, %eax
+	movl		%eax, -14(%bp)
 
 	/* And load the GDT */
-	data32 lgdt	%gs:0
+	data32 lgdt	-16(%bp)
+	mov		%ebp, %esp
 
 	/* Get us to protected mode now */
 	mov		$1, %eax

qdict.c

@@ -122,9 +122,8 @@ void qdict_put_obj(QDict *qdict, const char *key, QObject *value)
         /* allocate a new entry */
         entry = alloc_entry(key, value);
         QLIST_INSERT_HEAD(&qdict->table[hash], entry, next);
+        qdict->size++;
     }
-
-    qdict->size++;
 }
 
 /**

qemu-char.c

@@ -1180,6 +1180,9 @@ static CharDriverState *qemu_chr_open_tty(QemuOpts *opts)
     int fd;
 
     TFR(fd = open(filename, O_RDWR | O_NONBLOCK));
+    if (fd < 0) {
+        return NULL;
+    }
     tty_serial_init(fd, 115200, 'N', 8, 1);
     chr = qemu_chr_open_fd(fd, fd);
     if (!chr) {
@@ -2314,8 +2317,7 @@ QemuOpts *qemu_chr_parse_compat(const char *label, const char *filename)
         qemu_opt_set(opts, "backend", "udp");
         if (sscanf(p, "%64[^:]:%32[^@,]%n", host, port, &pos) < 2) {
             host[0] = 0;
-            if (sscanf(p, ":%32[^,]%n", port, &pos) < 1) {
-                fprintf(stderr, "udp #1\n");
+            if (sscanf(p, ":%32[^@,]%n", port, &pos) < 1) {
                 goto fail;
             }
         }
@@ -2326,7 +2328,6 @@ QemuOpts *qemu_chr_parse_compat(const char *label, const char *filename)
             if (sscanf(p, "%64[^:]:%32[^,]%n", host, port, &pos) < 2) {
                 host[0] = 0;
                 if (sscanf(p, ":%32[^,]%n", port, &pos) < 1) {
-                    fprintf(stderr, "udp #2\n");
                     goto fail;
                 }
             }
@@ -2354,7 +2355,6 @@ QemuOpts *qemu_chr_parse_compat(const char *label, const char *filename)
     }
 
 fail:
-    fprintf(stderr, "%s: fail on \"%s\"\n", __FUNCTION__, filename);
     qemu_opts_del(opts);
     return NULL;
 }

qemu-common.h

@@ -2,6 +2,8 @@
 #ifndef QEMU_COMMON_H
 #define QEMU_COMMON_H
 
+#include "config-host.h"
+
 #define QEMU_NORETURN __attribute__ ((__noreturn__))
 #ifdef CONFIG_GCC_ATTRIBUTE_WARN_UNUSED_RESULT
 #define QEMU_WARN_UNUSED_RESULT __attribute__((warn_unused_result))
@@ -29,7 +31,6 @@
 #include <fcntl.h>
 #include <sys/stat.h>
 #include <assert.h>
-#include "config-host.h"
 
 #ifndef O_LARGEFILE
 #define O_LARGEFILE 0
@@ -53,6 +54,10 @@ struct iovec {
     void *iov_base;
     size_t iov_len;
 };
+/*
+ * Use the same value as Linux for now.
+ */
+#define IOV_MAX		1024
 #else
 #include <sys/uio.h>
 #endif

qemu-config.h

@@ -7,6 +7,7 @@ extern QemuOptsList qemu_device_opts;
 extern QemuOptsList qemu_netdev_opts;
 extern QemuOptsList qemu_net_opts;
 extern QemuOptsList qemu_rtc_opts;
+extern QemuOptsList qemu_global_opts;
 extern QemuOptsList qemu_mon_opts;
 
 int qemu_set_option(const char *str);

qemu-io.c

@@ -129,7 +129,8 @@ create_iovec(QEMUIOVector *qiov, char **argv, int nr_iov, int pattern)
 {
 	size_t *sizes = calloc(nr_iov, sizeof(size_t));
 	size_t count = 0;
-	void *buf, *p;
+	void *buf = NULL;
+	void *p;
 	int i;
 
 	for (i = 0; i < nr_iov; i++) {
@@ -139,19 +140,19 @@ create_iovec(QEMUIOVector *qiov, char **argv, int nr_iov, int pattern)
 		len = cvtnum(arg);
 		if (len < 0) {
 			printf("non-numeric length argument -- %s\n", arg);
-			return NULL;
+			goto fail;
 		}
 
 		/* should be SIZE_T_MAX, but that doesn't exist */
 		if (len > UINT_MAX) {
 			printf("too large length argument -- %s\n", arg);
-			return NULL;
+			goto fail;
 		}
 
 		if (len & 0x1ff) {
 			printf("length argument %lld is not sector aligned\n",
 				len);
-			return NULL;
+			goto fail;
 		}
 
 		sizes[i] = len;
@@ -167,6 +168,7 @@ create_iovec(QEMUIOVector *qiov, char **argv, int nr_iov, int pattern)
 		p += sizes[i];
 	}
 
+fail:
 	free(sizes);
 	return buf;
 }

qemu-monitor.hx

@@ -130,7 +130,7 @@ ETEXI
 
     {
         .name       = "eject",
-        .args_type  = "force:-f,filename:B",
+        .args_type  = "force:-f,device:B",
         .params     = "[-f] device",
         .help       = "eject a removable medium (use -f to force it)",
         .user_print = monitor_user_noop,
@@ -763,8 +763,7 @@ ETEXI
         .args_type  = "value:s",
         .params     = "value",
         .help       = "set maximum speed (in bytes) for migrations",
-        .user_print = monitor_user_noop,
-        .mhandler.cmd_new = do_migrate_set_speed,
+        .mhandler.cmd = do_migrate_set_speed,
     },
 
 STEXI
@@ -887,7 +886,7 @@ ETEXI
 
     {
         .name       = "balloon",
-        .args_type  = "value:i",
+        .args_type  = "value:M",
         .params     = "target",
         .help       = "request VM to change it's memory allocation (in MB)",
         .user_print = monitor_user_noop,

qemu-nbd.c

@@ -467,7 +467,7 @@ int main(int argc, char **argv)
             }
         }
     } while (persistent || nb_fds > 1);
-    qemu_free(data);
+    qemu_vfree(data);
 
     close(sharing_fds[0]);
     bdrv_close(bs);

qemu-options.hx

@@ -404,6 +404,12 @@ ETEXI
 
 DEF("device", HAS_ARG, QEMU_OPTION_device,
     "-device driver[,options]  add device\n")
+STEXI
+@item -device @var{driver}[,@var{option}[,...]]
+Add device @var{driver}. Depending on the device type,
+@var{option} (typically @var{key}=@var{value}) may be useful.
+ETEXI
+
 DEF("name", HAS_ARG, QEMU_OPTION_name,
     "-name string1[,process=string2]    set the name of the guest\n"
     "            string1 sets the window title and string2 the process name (on Linux)\n")
@@ -962,7 +968,7 @@ the guest, use the following:
 
 @example
 # on the host
-qemu -net user,hostfwd=tcp:5555::23 [...]
+qemu -net user,hostfwd=tcp::5555-:23 [...]
 telnet localhost 5555
 @end example
 
@@ -1893,6 +1899,8 @@ ETEXI
 DEF("nodefaults", 0, QEMU_OPTION_nodefaults, \
     "-nodefaults     don't create default devices.\n")
 STEXI
+@item -nodefaults
+Don't create default devices.
 ETEXI
 
 #ifndef _WIN32
@@ -1915,10 +1923,6 @@ Immediately before starting guest execution, drop root privileges, switching
 to the specified user.
 ETEXI
 
-STEXI
-@end table
-ETEXI
-
 #if defined(TARGET_SPARC) || defined(TARGET_PPC)
 DEF("prom-env", HAS_ARG, QEMU_OPTION_prom_env,
     "-prom-env variable=value\n"
@@ -1934,6 +1938,19 @@ DEF("old-param", 0, QEMU_OPTION_old_param,
 #endif
 DEF("readconfig", HAS_ARG, QEMU_OPTION_readconfig,
     "-readconfig <file>\n")
+STEXI
+@item -readconfig @var{file}
+Read device configuration from @var{file}.
+ETEXI
 DEF("writeconfig", HAS_ARG, QEMU_OPTION_writeconfig,
     "-writeconfig <file>\n"
-    "                read/write config file")
+    "                read/write config file\n")
+STEXI
+@item -writeconfig @var{file}
+Write device configuration to @var{file}.
+ETEXI
+
+HXCOMM This is the last statement. Insert new options before this line!
+STEXI
+@end table
+ETEXI

qemu-sockets.c

@@ -424,7 +424,7 @@ static int inet_parse(QemuOpts *opts, const char *str)
                     __FUNCTION__, str);
             return -1;
         }
-        qemu_opt_set(opts, "ipv6", "yes");
+        qemu_opt_set(opts, "ipv6", "on");
     } else if (qemu_isdigit(str[0])) {
         /* IPv4 addr */
         if (2 != sscanf(str,"%64[0-9.]:%32[^,]%n",addr,port,&pos)) {
@@ -432,7 +432,7 @@ static int inet_parse(QemuOpts *opts, const char *str)
                     __FUNCTION__, str);
             return -1;
         }
-        qemu_opt_set(opts, "ipv4", "yes");
+        qemu_opt_set(opts, "ipv4", "on");
     } else {
         /* hostname */
         if (2 != sscanf(str,"%64[^:]:%32[^,]%n",addr,port,&pos)) {
@@ -450,9 +450,9 @@ static int inet_parse(QemuOpts *opts, const char *str)
     if (h)
         qemu_opt_set(opts, "to", h+4);
     if (strstr(optstr, ",ipv4"))
-        qemu_opt_set(opts, "ipv4", "yes");
+        qemu_opt_set(opts, "ipv4", "on");
     if (strstr(optstr, ",ipv6"))
-        qemu_opt_set(opts, "ipv6", "yes");
+        qemu_opt_set(opts, "ipv6", "on");
     return 0;
 }
 

savevm.c

@@ -1696,7 +1696,7 @@ void do_savevm(Monitor *mon, const QDict *qdict)
     sn->vm_clock_nsec = qemu_get_clock(vm_clock);
 
     /* Delete old snapshots of the same name */
-    if (del_existing_snapshots(mon, name) < 0) {
+    if (name && del_existing_snapshots(mon, name) < 0) {
         goto the_end;
     }
 

sdl.c

@@ -525,6 +525,7 @@ static void sdl_send_mouse_event(int dx, int dy, int dz, int x, int y, int state
 static void toggle_full_screen(DisplayState *ds)
 {
     gui_fullscreen = !gui_fullscreen;
+    do_sdl_resize(real_screen->w, real_screen->h, real_screen->format->BitsPerPixel);
     if (gui_fullscreen) {
         scaling_active = 0;
         gui_saved_grab = gui_grab;

slirp/misc.c

@@ -179,7 +179,7 @@ fork_exec(struct socket *so, const char *ex, int do_pty)
 		   close(s);
 
 		i = 0;
-		bptr = strdup(ex); /* No need to free() this */
+		bptr = qemu_strdup(ex); /* No need to free() this */
 		if (do_pty == 1) {
 			/* Setup "slirp.telnetd -x" */
 			argv[i++] = "slirp.telnetd";

slirp/tftp.c

@@ -264,6 +264,12 @@ static void tftp_handle_rrq(Slirp *slirp, struct tftp_t *tp, int pktlen)
   size_t prefix_len;
   char *req_fname;
 
+  /* check if a session already exists and if so terminate it */
+  s = tftp_session_find(slirp, tp);
+  if (s >= 0) {
+    tftp_session_terminate(&slirp->tftp_sessions[s]);
+  }
+
   s = tftp_session_allocate(slirp, tp);
 
   if (s < 0) {
@@ -362,6 +368,7 @@ static void tftp_handle_rrq(Slirp *slirp, struct tftp_t *tp, int pktlen)
 	  }
 
 	  tftp_send_oack(spt, "tsize", tsize, tp);
+	  return;
       }
   }
 
@@ -385,6 +392,19 @@ static void tftp_handle_ack(Slirp *slirp, struct tftp_t *tp, int pktlen)
   }
 }
 
+static void tftp_handle_error(Slirp *slirp, struct tftp_t *tp, int pktlen)
+{
+  int s;
+
+  s = tftp_session_find(slirp, tp);
+
+  if (s < 0) {
+    return;
+  }
+
+  tftp_session_terminate(&slirp->tftp_sessions[s]);
+}
+
 void tftp_input(struct mbuf *m)
 {
   struct tftp_t *tp = (struct tftp_t *)m->m_data;
@@ -397,5 +417,9 @@ void tftp_input(struct mbuf *m)
   case TFTP_ACK:
     tftp_handle_ack(m->slirp, tp, m->m_len);
     break;
+
+  case TFTP_ERROR:
+    tftp_handle_error(m->slirp, tp, m->m_len);
+    break;
   }
 }