Compare commits

..

112 Commits

Author SHA1 Message Date
Anthony Liguori
9e3a7df77c Update for 0.10.5 release
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 15:42:42 -05:00
Mark McLoughlin
0926c7a4e5 kvm: work around supported cpuid ioctl() brokenness
KVM_GET_SUPPORTED_CPUID has been known to fail to return -E2BIG
when it runs out of entries. Detect this by always trying again
with a bigger table if the ioctl() fills the table.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 15:21:28 -05:00
Anthony Liguori
a02ba54eed Remove noisy printf when KVM masks CPU features
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 15:21:24 -05:00
Avi Kivity
578485d835 kvm: Trim cpu features not supported by kvm
Remove cpu features that are not supported by kvm from the cpuid features
reported to the guest.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 15:21:20 -05:00
Avi Kivity
a675d9b8b5 Fix x86 feature modifications for features that set multiple bits
QEMU allows adding or removing cpu features by using the syntax '-cpu +feature'
or '-cpu -feature'.  Some cpuid features cause more than one bit to be set or
cleared; but QEMU stops after just one bit has been modified, causing the
feature bits to be inconsistent.

Fix by allowing all feature bits corresponding to a given name to be set.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 15:21:14 -05:00
Avi Kivity
ce60db1da2 Make x86 cpuid feature names available in file scope
To be used later.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 15:21:09 -05:00
Avi Kivity
428009b4aa kvm: Add support for querying supported cpu features
kvm does not support all cpu features; add support for dunamically querying
the supported feature set.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 15:21:04 -05:00
Anthony Liguori
c87a097b4a Introduce kvm_check_extension to check if KVM extensions are supported
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 15:20:56 -05:00
Mark McLoughlin
2fbc3b4c81 kvm: add error message for when SMP is requested
Right now, if you try e.g. '-smp 2' you just get 'failed to
initialize KVM'.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 13:21:36 -05:00
Richard W.M. Jones
8765893e9e Remove initrd warning message
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 13:21:36 -05:00
Jean-Christophe Dubois
822624e5d6 initialize struct sigevent before timer_create
When qemu is run under valgrind, valgrind shows the following output
on exit:

==3648== 1 errors in context 2 of 2:
==3648== Syscall param timer_create(evp) points to uninitialised byte(s)
==3648==    at 0x54E936A: timer_create (in /lib/librt-2.9.so)
==3648==    by 0x405DCF: dynticks_start_timer (vl.c:1549)
==3648==    by 0x40A966: main (vl.c:1726)
==3648==  Address 0x7fefffb34 is on thread 1's stack
==3648==  Uninitialised value was created by a stack allocation
==3648==    at 0x405D60: dynticks_start_timer (vl.c:1534)

This patch is a simple fix to remove this potential problem.

Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 13:21:36 -05:00
Jean-Christophe Dubois
fe54857a13 Fix NULL alarm_timer pointer at exit
This fixes a SIGSEGV error on qemu exit.

Here is the valgrind output related to this error

==3648== Process terminating with default action of signal 11 (SIGSEGV)
==3648==  Access not within mapped region at address 0x8
==3648==    at 0x40636B: host_alarm_handler (vl.c:1345)
==3648==    by 0x52D807F: (within /lib/libpthread-2.9.so)
==3648==    by 0x5C0A12E: tcsetattr (in /lib/libc-2.9.so)
==3648==    by 0x4DD601: term_exit (qemu-char.c:700)
==3648==    by 0x5B636EC: exit (in /lib/libc-2.9.so)
==3648==    by 0x5B4B5AC: (below main) (in /lib/libc-2.9.so)

This simple fix check for a valid pointer as host_alarm_handler is
also called after alarm_timer is released in the exit path.

Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 13:21:36 -05:00
Glauber Costa
ee60269c23 keep initrd in below 4g area.
initrd must be kept on the memory area below 4g. By not doing this,
we're seeing guests break while using -initrd and values of -mem
superior to 4096.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 13:21:36 -05:00
Uri Lublin
3978d7b4c8 migrate.c: migrate_fd_put_buffer: Do not busyloop: stop writing if EWOULDBLOCK
The migration code is non-blocking, designed for live migration.

Practically migrate_fd_put_buffer busy-loops trying to write, as
on many machines EWOULDBLOCK==EAGAIN (look in include/asm-generic/errno.h).

Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 13:21:24 -05:00
Hollis Blanchard
dc0be040c2 remove gcc 3.x requirement from documentation
This text is no longer accurate. After the patch is applied, the
generated version at http://www.nongnu.org/qemu/qemu-doc.html should be
regenerated.

This patch is also a candidate for the stable branch. (The URL above is
probably generated from the stable branch anyways, so maybe it goes
without saying.)

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20 13:19:43 -05:00
Edgar E. Iglesias
1570841432 ETRAX: Correct passing of kernel command line.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-15 21:43:56 +02:00
Edgar E. Iglesias
a59cc95e23 ETRAX: Correct setting of ethernet station address.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-15 21:43:44 +02:00
Edgar E. Iglesias
2058679372 CRIS: Fix bmi.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-15 21:43:31 +02:00
aliguori
f1cfb26c5a Fix DMA API when handling an immediate error from block layer (Avi Kivity)
The block layer may signal an immediate error on an asynchronous request
by returning NULL.  The DMA API did not handle this correctly, returning
an AIO request which would never complete (and which would crash if
cancelled).

Fix by detecting the failure and propagating it.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6893 c046a42c-6fe2-441c-8c8c-71466251a162
2009-05-14 08:09:31 -05:00
aliguori
662524f5dc Fix vectored aio bounce handling immediate errors (Avi Kivity)
If a bounced vectored aio fails immediately (the inner aio submission
returning NULL) then the bounce handler erronously returns an aio
request which will never be completed (and which crashes when cancelled).

Fix by detecting that the inner request has failed and propagating the
error.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6892 c046a42c-6fe2-441c-8c8c-71466251a162
2009-05-14 08:09:24 -05:00
aliguori
5f6521c78e Move block dma helpers aiocb to store dma state (Avi Kivity)
Use the dedicated dma aiocb to store intermediate state for dma block
transactions.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6874 c046a42c-6fe2-441c-8c8c-71466251a162
2009-05-14 08:09:17 -05:00
aliguori
abe73c324e Use vectored aiocb storage to store vector translation state (Avi Kivity)
Now that we have a dedicated acb pool for vector translation acbs, we can
store the vector translation state in the acbs instead of in an external
structure.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6873 c046a42c-6fe2-441c-8c8c-71466251a162
2009-05-14 08:09:10 -05:00
Glauber Costa
ed16937820 reset state for load_linux
The linux loader is just an option rom like any other, just with
some special requirements. Right now, our option rom resetting
mechanism is not being applied to it. As a result, users using
-kernel will not be able to successfully reboot their machines

This patch fixes it by saving all the data we generated in
the load_linux() function, to be used later by the option rom
resetting mechanism.

This also includes Mark's fix for -kernel

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-13 08:08:09 -05:00
Anthony Liguori
faf8a63492 Revert "reset state for load_linux"
This reverts commit 2da1e39864.

This fix on the stable branch:

  commit 2da1e39864
  Author: Glauber Costa <glommer@redhat.com>
  Date:   Fri May 8 02:22:13 2009 -0300

    reset state for load_linux

Caused -kernel to break.

The problem is that we're passing the ROM's ram_addr_t to
load_linux() rather than its target_phys_addr_t. We also
need to register the memory before trying to write to
it.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-13 08:06:54 -05:00
Anthony Liguori
34aee2552f Update for 0.10.4 release
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-11 13:13:19 -05:00
Kevin Wolf
9fd0e57dc9 Improve block range checks
This patch makes the range checks for block requests more strict: It fixes a
potential integer overflow and checks for negative offsets. Also, it adds the
check for compressed writes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-08 16:04:20 -05:00
Amit Shah
2fd0f93286 e1000: Do not reinit pci config space to 0
pci_register_device already mallocs the pci config space buffer filled
with zeroes.

Doing this again breaks some default config space writes like
setting the subsystem vendor id and subsystem device id.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-08 15:57:41 -05:00
Alexander Graf
8bd8199f70 AIO deletion race fix
When deleting an fd event there is a chance the object doesn't get
deleted, but only ->deleted set positive and deleted somewhere later.

Now, if we create a handler for the fd again before the actual
deletion occurs, we end up writing data into an object that has
->deleted set, which is obviously wrong.

I see two ways to fix this:

1. Don't return ->deleted objects in the search
2. Unset ->deleted in the search

This patch implements 1. which feels safer to do. It fixes AIO issues
I've seen with curl, as libcurl unsets fd event listeners pretty
frequently.

Signed-off-by: Alexander Graf <alex@csgraf.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-08 15:57:33 -05:00
Glauber Costa
2da1e39864 reset state for load_linux
The linux loader is just an option rom like any other, just with
some special requirements. Right now, our option rom resetting
mechanism is not being applied to it. As a result, users using
-kernel will not be able to successfully reboot their machines

This patch fixes it by saving all the data we generated in
the load_linux() function, to be used later by the option rom
resetting mechanism.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-08 15:57:20 -05:00
Glauber Costa
b468f27acd register reset handler for option_roms
Currently, boot options are not preserved across a system reset.
option roms can modify themselves, or can for instance restore the real
int 0x19 vector after they tried to boot from it.

To properly do that, we need a reset handler registered to deal with option
roms. This patch is based on current version on qemu-kvm.git

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-08 15:55:22 -05:00
Gleb Natapov
8bc2ad6a6a Fix cluster freeing in qcow2
Need to drop QCOW_OFLAG_COPIED from a cluster pointer before freeing it.

Add an explanation how thing meant to work.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-08 15:54:06 -05:00
Anthony Liguori
f24f1e2a85 Enable power button even generation.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-08 10:20:48 -05:00
Anthony Liguori
5d00b89b12 Update version for 0.10.3 release
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01 11:57:29 -05:00
aliguori
a2b8ec7d7d Implement cancellation method for dma async I/O (Avi Kivity)
Move the dma helpers to a private aio pool, and implement a cancellation
method for them.  Should prevent issues when cancelling I/O while dma is
in progress.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6872 c046a42c-6fe2-441c-8c8c-71466251a162
2009-05-01 11:06:12 -05:00
aliguori
a95ad7bcbb Convert vectored aio emulation to use a dedicated pool (Avi Kivity)
This allows us to remove a hack in the vectored aio cancellation code.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6871 c046a42c-6fe2-441c-8c8c-71466251a162
2009-05-01 11:06:04 -05:00
aliguori
3d2d1e3960 Refactor aio callback allocation to use an aiocb pool (Avi Kivity)
Move the AIOCB allocation code to use a dedicate structure, AIOPool.  AIOCB
specific information, such as the AIOCB size and cancellation routine, is
moved into the pool.

At present, there is exactly one pool per block format driver, maintaining
the status quo.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6870 c046a42c-6fe2-441c-8c8c-71466251a162
2009-05-01 11:05:57 -05:00
Alex Williamson
3382d425bc Fix hw/acpi.c build w/ DEBUG enabled
Trivial build warning/fixes when the local DEBUG define is enabled.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01 10:13:40 -05:00
Anthony Liguori
2031cfc4ea Make sure not to fall through on error in loadvm
This is from the KVM tree

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01 10:13:32 -05:00
Chris Wright
260437cba3 Pci nic: pci_register_device can fail
The pci_register_device() call in PCI nic initialization routines can
fail.  Handle this failure and propagate a meaningful error message to
the user instead of generating a SEGV.

Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01 10:13:24 -05:00
Anthony Liguori
233e01e475 Fix serial option with -drive
This is from the KVM tree.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01 10:13:17 -05:00
Glauber Costa
544995e22e suport device driver initialization model
According to PnP specification, Appendix B, Option ROMs
that support DDIM (device driver initialization model) should
have their memory space writeable.

KVM deviates from us here, by removing the IO_MEM_ROM flag,
to allow for PCI option ROMs (they require DDIM). However,
there's absolutely no reason we can't do the same.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01 10:12:27 -05:00
Jan Kiszka
57ba0792ca kvm: Avoid COW if KVM MMU is asynchronous
Avi Kivity wrote:
> Suggest wrapping in a function and hiding it deep inside kvm-all.c.
>

Done in v2:

---------->

If the KVM MMU is asynchronous (kernel does not support MMU_NOTIFIER),
we have to avoid COW for the guest memory. Otherwise we risk serious
breakage when guest pages change there physical locations due to COW
after fork. Seen when forking smbd during runtime via -smb.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01 10:11:02 -05:00
Gerd Hoffmann
a2daabc49a vnc: windup keypad keys for qemu console emulation
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01 10:08:16 -05:00
aliguori
530a491fc3 block-vpc: Don't silently create smaller image than requested (Kevin Wolf)
The algorithm from the VHD specification for CHS calculation silently limits
images to 127 GB which may confuse a user who requested a larger image. Better
output an error message and abort.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7183 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18 15:39:10 +00:00
aliguori
2fcc1d5b69 Regenerate BIOS for stable branch
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7173 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 21:12:04 +00:00
aliguori
cb2768eb3c Fix non-ACPI Timer Interrupt Routing (Beth Kon)
Replicate ACPI irq0->inti2 override in mp table for non-acpi case.

v1 -> v2 adds comment suggested by Ryan.

Signed-off-by: Beth Kon <eak@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7172 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 21:09:14 +00:00
aliguori
202e9d440e hpet: Fix emulation of HPET_TN_SETVAL (Jan Kiszka)
While Intel's spec is not that clear here, latest changes to Linux' HPET
code (commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403, "x86: hpet: stop
HPET_COUNTER when programming periodic mode") strongly suggest that
HPET_TN_SETVAL rather means: Set _both_ the comparator value and
register.

With this patch applied, I'm again able to boot 2.6.30-rc kernels as
they no longer panic like this (which was due to the comparator
register remaining 0):

ENABLING IO-APIC IRQs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 2) ...
....... failed.
...trying to set up timer as Virtual Wire IRQ...
..... failed.
...trying to set up timer as ExtINT IRQ...
..... failed :(.
Kernel panic - not syncing: IO-APIC + timer doesn't work! [...]

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7171 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 21:05:45 +00:00
aliguori
3c398c0f86 kvm: Fix cpuid initialization (Jan Kiszka)
Fix (more or less) spurious guest boot failures due to corrupted cpuid
states. The reason was insufficient initialization of cpuid entries
before passing them to the kernel.

At this chance also fix improper entry pointer progression and simplify
the code a bit.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7170 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 21:05:41 +00:00
aliguori
4df8f71ee5 qcow2 corruption: Fix alloc_cluster_link_l2 (Kevin Wolf)
This patch fixes a qcow2 corruption bug introduced in SVN Rev 5861. L2 tables
are big endian, so entries must be converted before being passed to functions.

This bug is easy to trigger. The following script will create and destroy a
qcow2 image (the header is gone after three loop iterations):

    #!/bin/bash
    qemu-img create -f qcow2 test.qcow 1M
    for i in $(seq 1 10); do
    qemu-system-x86_64 -hda test.qcow -monitor stdio > /dev/null 2>&1 <<EOF
    savevm test-$i
    quit
    EOF
    done

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7166 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 20:44:41 +00:00
aliguori
84eba9b8f1 Free VLANClientState using qemu_free() (Mark McLoughlin)
It's allocated using qemu_mallocz(), so ...

The name and model strings are strdup() allocated, so free()
is still appropriate for them.

Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7161 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 18:07:01 +00:00
aliguori
a34b6eb776 Introduce VLANClientState::cleanup() (Mark McLoughlin)
We're currently leaking memory and file descriptors on device
hot-unplug.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7160 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 18:06:56 +00:00
aliguori
1ed3d07a22 Use NICInfo::model for eepro100 savevm ID string (Mark McLoughlin)
NICInfo::model will always be identical to the device name strings
we're currently passing to nic_init(). Just re-use NICInfo::model.

This makes it clear why we use vc->model for unregister_savevm()
in a subsequent patch.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7159 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 18:06:50 +00:00
aliguori
00f56b3dcf Add unregister_savevm() (Mark McLoughlin)
Currently there's no way to unregister a savevm callback, so
e.g. if a NIC is hot-unplugged and a savevm is issued, we'll
segfault.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7158 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 18:06:46 +00:00
aliguori
71dc1b6fcb Remove NICInfo from e1000 and mipsnet state (Mark McLoughlin)
NICInfo isn't used after initialization, so remove it from the driver
state structures.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7157 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 18:06:42 +00:00
aliguori
eb5951f333 Remove some useless malloc() checking (Mark McLoughlin)
Now that we abort() on malloc, neither qemu_find_vlan() nor
net_tap_fd_init() can fail.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7156 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 18:06:38 +00:00
aliguori
8cacc9ad14 Don't fail PCI hotplug if no NIC model is supplied (Mark McLoughlin)
It's perfectly fine to not supply a NIC model when adding
a new NIC - we supply the default model to pci_nic_init()
and it uses that if one wasn't explicitly supplied.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7155 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 18:06:34 +00:00
aliguori
76dcd4921c Fix error handling in net_client_init() (Mark McLoughlin)
We weren't freeing the name string everywhere.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7154 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 18:06:31 +00:00
aliguori
0ee50993ce struct iovec is now universally available (Mark McLoughlin)
struct iovec is now defined in qemu-common.h if needed, so we don't need
the tap code to handle !defined(HAVE_IOVEC).

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7153 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 18:06:27 +00:00
aliguori
7020c09209 Remove stray GSO code from virtio_net (Mark McLoughlin)
Obviously merged from kvm-userspace accidentally.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7152 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17 18:06:24 +00:00
aliguori
8bb66d8601 Recognise evdev(xx)_aliases(yy) and xfree86(xx)_aliases(yy) as keymap names.
Newer Xorg use these with non-default kemaps (such as the ThinkPad keymap).

aliguori: this is from r7097 in trunk by balrog

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7098 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-13 13:29:40 +00:00
aliguori
bcb8c5535d Make PCI config status register read-only
From the documentation I can find, this register is supposed to be read-only.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7071 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10 20:49:44 +00:00
aliguori
da95f49a9d Fix crash on resolution change -> screen dump -> vga redraw (Avi Kivity)
The vga screen dump function updates last_width and last_height,
but does not change the DisplaySurface that these variables describe.
A consequent vga_draw_graphic() will therefore fail to resize the
surface and crash.

Fix by invalidating the display state after a screen dump, forcing
vga_draw_graphic() to reallocate the DisplaySurface.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7069 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10 18:36:38 +00:00
aliguori
06b393452f Update version for release
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7012 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-07 01:57:17 +00:00
aliguori
b7d11af2e0 Fix find_device_type() to correctly identify floppy disk devices; (Luca Tettamanti)
they are reported as DRIVE_REMOVABLE by win32.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7011 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-07 01:46:18 +00:00
aliguori
8d47bb6162 Fix savevm after BDRV_FILE size enforcement
We now enforce that you cannot write beyond the end of a non-growable file.
 qcow2 files are not growable but we rely on them being growable to do
 savevm/loadvm.  Temporarily allow them to be growable by introducing a new
 API specifically for savevm read/write operations.
 
 Reported-by: malc
 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
 


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7005 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05 21:07:26 +00:00
aliguori
80acab6c50 stop dirty tracking just at the end of migration (Glauber Costa)
If there is still work to do, it is not safe to assume we
can end the dirty tracking. Specifically, kvm can update the dirty
tracking log inside ram_save_block(), leaving pages still out of sync
if we go with the current code.

Based on a patch by Yaniv Kamay

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7002 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05 19:33:41 +00:00
aliguori
da0ac2bc13 create qemu_file_set_error (Glauber Costa)
This is mainly for consistency, since we don't want
anything outside of savevm setting it explicitly. There
are current no users of that in qemu tree, but there
are potential candidates on kvm-userspace. And avi
is a nice guy, let's be nice with him.

Based on a patch by Yaniv Kamay

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7001 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05 19:33:37 +00:00
aliguori
d3c2632047 propagate error on failed completion (Glauber Costa)
migrate_fd_put_ready() calls qemu_savevm_state_complete(),
but the later can fail.

If it happens, re-start the vm and propagate the error up

Based on a patch by Yaniv Kamay

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@7000 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05 19:33:33 +00:00
aliguori
7cc73776e7 qcow2: fix image creation for large, > ~2TB, images (Chris Wright)
When creating large disk images w/ qcow2 format, qcow2_create is hard
coded to creating a single refcount block.  This is insufficient for
large images, and will cause qemu-img to segfault as it walks off the
end of the refcount block.  Keep track of the space needed during image
create and create proper number of refcount blocks accordingly.

https://bugzilla.redhat.com/show_bug.cgi?id=491943

Signed-off-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6988 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05 18:16:10 +00:00
aliguori
937e9a1c83 pci_add storage: fix error handling for 'if' parameter (Eduardo Habkost)
This fixes:

 - The error message to show the actual if= argument value. It was showing
   the filename instead, because 'buf' is reaused on the filename parsing.
 - A bug that makes a block device to be created even when an unsupported if= arg
   is passed to pci_add.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6987 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05 18:16:04 +00:00
aliguori
4498819404 Fix (at least one cause of) qcow2 corruption. (Nolan Leake)
qcow2's get_cluster_offset() scans forward in the l2 table to find other
clusters that have the same allocation status as the first cluster.
This is used by (among others) qcow_is_allocated().

Unfortunately, it was not checking to be sure that it didn't fall off
the end of the l2 table.  This patch adds that check.

The symptom that motivated me to look into this was that
bdrv_is_allocated() was returning false when there was in fact data
there.  This is one of many ways this bug could lead to data corruption.

I checked the other place that scans for consecutive unallocated blocks
(alloc_cluster_offset()) and it appears to be OK:
    nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
appears to prevent the same problem from occurring.

Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6986 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05 18:15:59 +00:00
aliguori
c61ad61830 Fix oops on 2.6.25 guest (Rusty Russell)
I believe this is behind the following:
https://bugs.edge.launchpad.net/ubuntu/jaunty/+source/linux/+bug/331128

virtio_pci in 2.6.25 didn't do feature negotiation correctly: it acked every
bit.  Fortunately, we can detect this.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6985 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05 18:15:54 +00:00
aurel32
65297bc408 SH4: Add support for kernel cmdline
Backport of revisions 6792, 6916, 6919 from trunk.



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6960 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-31 05:55:16 +00:00
aliguori
02d400ead7 char: Fix closing of various char devices (Jan Kiszka)
This patch fixes several issues around closing char devices. Affected
were pty (timer was left behind, even running), udp (no close handling
at all) and tcp (missing async IO handler cleanup). The bugs either
caused segfaults or stalled the qemu process. So far, hot-unplugging USB
serial adapters suffered from this.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6912 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-28 18:01:29 +00:00
aliguori
20a9c6ac7f host_device_remove: remove incorrect check for device name (Eduardo Habkost)
There is no need to check for valid prefixes on the the device name
when removing it. If the device name is found on the vlan client list,
it can be removed, regardless of the prefix used on its name.

To reproduce the bug, just run this on the monitor:

 (qemu) host_net_add user name=foobar
 (qemu) host_net_remove 0 foobar
 invalid host network device foobar
 (qemu)

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6890 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-28 15:51:46 +00:00
aliguori
bd0b264c21 Enable -k option on Win32 (Herve Poussineau)
Attached patch enables -k option on Win32. There is no reason to disable it.

Signed-off-by: Herve Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6889 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-28 15:46:15 +00:00
aliguori
0f31aac44f configure sensitive to user locale (Andreas Faerber)
On German Fedora 9, no KVM errors are displayed.
This is because configure greps for "error:", which is locale-sensitive.

Use LANG=C for configure to find and display errors as expected.

Signed-off-by: Andreas Faerber <andreas.faerber@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6883 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-22 03:01:39 +00:00
aliguori
30b15843b2 Fix VGA issue introduced by r6349 (malc)
Thanks to Robert Riebisch for bisection

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6882 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-22 02:59:21 +00:00
aliguori
04ffdd7f94 Update version for release
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6880 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-21 23:02:41 +00:00
aliguori
7648bb760d Rename stable branch
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6879 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-21 23:00:32 +00:00
aliguori
ebb7184720 Restore old stable branch
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6878 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-21 22:59:47 +00:00
aliguori
3f546bd0b1 Add release_0_10_1 tag
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10@6876 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-21 22:34:21 +00:00
aliguori
00614a4cb4 Update Changelog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6869 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-20 16:22:31 +00:00
aliguori
7c14db42cb virtio: Allow guest to defer VIRTIO_F_NOTIFY_ON_EMPTY (Alex Williamson)
There may be cases where the guest does not want the avail queue
interrupt, even when it's empty.  For the virtio-net case, the
guest may use a different buffering scheme or decide polling for
used buffers is more efficient.  This can be accomplished by simply
checking for whether the guest has acknowledged the existing notify
on empty flag.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6868 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-20 16:18:45 +00:00
aliguori
e58843d0f1 e1000: Fix RX descriptor low threshold interrupt logic (Alex Williamson)
The RXDMT0 interrupt is supposed to fire when the number of free
RX descriptors drops to some fraction of the total descriptors.
However in practice, it seems like we're adding this interrupt
cause on every RX.  Fix the logic to treat (tail - head) as the
number of free entries rather than the number of used entries.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6867 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-20 16:18:39 +00:00
aliguori
0e39d3f89b x86: Add NULL check to lsl (Jan Kiszka)
According to the Intel specs, lsl performs a check against NULL for the
provided selector, just like lar does. helper_lar() includes the
corresponding code, helper_lsl() was lacking it so far.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6866 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-20 16:18:35 +00:00
aliguori
5389a9df53 temporarily disable logging around pci config writes (Avi Kivity)
A pci config write may remap the vga linear frame buffer, confusing the
memory slot dirty logging logic.

Fixed Windows with -vga std.

Signed-off-by: Avi Kivity <avi@redhat.com>
Sigend-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6854 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 18:11:21 +00:00
aliguori
21fd832512 stop dirty logging while updating cirrus bank memory (Glauber Costa)
Otherwise, slot tracking gets confused.

This fixes a screen corruption bug with Ubuntu guest installation.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6853 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 18:11:17 +00:00
aliguori
15d4afd55b Update changelog
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6848 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 16:22:40 +00:00
aliguori
3df962a30d qemu:virtio-net: Check return size on the correct sg list (Alex Williamson)
When checking that the size of the control virtqueue return field
is sufficient, use the correct sg list.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6847 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 16:19:04 +00:00
aliguori
4827c90cef make qemu_announce_self handle non contiguous net tables (Marcelo Tosatti)
With hotplug nd_table might contain holes.

Noticed by Eduardo Habkost.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6846 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 16:18:57 +00:00
aliguori
0f56231dce Revert r6404
This series is broken by design as it requires expensive IO operations at
open time causing very long delays when starting a virtual machine for the
first time.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6821 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-11 20:16:16 +00:00
aliguori
523faf1b92 Revert r6405
This series is broken by design as it requires expensive IO operations at
open time causing very long delays when starting a virtual machine for the
first time.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6820 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-11 20:16:12 +00:00
aliguori
414c078104 Revert r6406
This series is broken by design as it requires expensive IO operations at
open time causing very long delays when starting a virtual machine for the
first time.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6819 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-11 20:16:05 +00:00
aliguori
9cecf0f570 Revert r6407
This series is broken by design as it requires expensive IO operations at
open time causing very long delays when starting a virtual machine for the
first time.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6818 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-11 20:16:01 +00:00
aliguori
4ca9f3dd71 Revert r6408
This series is broken by design as it requires expensive IO operations at
open time causing very long delays when starting a virtual machine for the
first time.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6817 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-11 20:15:55 +00:00
aurel32
f902c4192e qemu-img: fix help message
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6788 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-08 19:52:43 +00:00
aliguori
b96a313d3d Remove unnecessary prefix on SDL_syswm.h. This fixes the build for certain
installs of SDL.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6781 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-08 15:04:13 +00:00
aurel32
d9aa1fce5a Clear CPU_INTERRUPT_EXIT on VM load
CPU_INTERRUPT_EXIT is not set anymore in env->interrupt_request since
revision 6729. Make sure the bit is cleared on VM load.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6760 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07 21:08:39 +00:00
aurel32
8a11f5ff08 Fix race condition on access to env->interrupt_request
env->interrupt_request is accessed as the bit level from both main code
and signal handler, making a race condition possible even on CISC CPU.
This causes freeze of QEMU under high load when running the dyntick
clock.

The patch below move the bit corresponding to CPU_INTERRUPT_EXIT in a
separate variable, declared as volatile sig_atomic_t, so it should be
work even on RISC CPU.

We may want to move the cpu_interrupt(env, CPU_INTERRUPT_EXIT) case in
its own function and get rid of CPU_INTERRUPT_EXIT. That can be done
later, I wanted to keep the patch short for easier review.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6729 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:49:37 +00:00
aliguori
b786b7ccbd monitor: Rework early disk password inquiry (Jan Kiszka)
Reading the passwords for encrypted hard disks during early startup is
broken (I guess for quiet a while now):
 - No monitor terminal is ready for input at this point
 - Forcing all mux'ed terminals into monitor mode can confuse other
   users of that channels

To overcome these issues and to lay the ground for a clean decoupling of
monitor terminals, this patch changes the initial password inquiry as
follows:
 - Prevent autostart if there is some encrypted disk
 - Once the user tries to resume the VM, prompt for all missing
   passwords
 - Only resume if all passwords were accepted

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6699 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 19:42:40 +00:00
aliguori
d3be2b2f71 monitor: Report encrypted disks in snapshot mode (Jan Kiszka)
If the backing file is encrypted, 'info block' currently does not report
the disk as encrypted. Fix this by using the standard API to check disk
encryption mode. Moreover, switch to a canonical output format.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6698 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 19:42:36 +00:00
aliguori
e36fb2a3a2 monitor: Use reasonable default virtual console size (Jan Kiszka)
If a target uses a tiny display (like the MusicPal), the default monitor
is currently set to the same size. Fix this by applying the same
defaults like already used serial and virtio consoles.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6697 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 19:42:30 +00:00
aliguori
4978045781 block: Introduce bdrv_get_encrypted_filename (Jan Kiszka)
Introduce bdrv_get_encrypted_filename service to allow more informative
password prompting.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6696 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 19:42:19 +00:00
aliguori
cb5745c529 block: Improve bdrv_iterate (Jan Kiszka)
Make bdrv_iterate more useful by passing the BlockDriverState to the
iterator instead of the device name.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6695 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 19:42:15 +00:00
aliguori
295b492cfa block: Polish error handling of brdv_open2 (Jan Kiszka)
Make sure that we always delete temporary disk images on error, remove
obsolete malloc error checks and return proper error codes.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6694 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 19:42:11 +00:00
aliguori
af8222c0f8 char-mux: Use separate input buffers (Jan Kiszka)
Currently, the intermediate input buffer of mux'ed character devices
records data across all sub-devices. This has the side effect that we
easily leak data recorded over one sub-devices to another once we switch
the focus. Avoid data loss and confusion by defining exclusive buffers.

Note: In contrast to the original author's claim, the buffering concept
still breaks down when the fifo of the currently active sub-device is
full. As we cannot accept futher data from this point on without risking
to loose it, we will also miss escape sequences, just like without all
that buffering. In short: There is no reliable escape sequence handling
without infinite buffers or the risk of loosing some data.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6693 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 19:42:07 +00:00
aliguori
249139f4e6 char: Fix initial reset (Jan Kiszka)
Recent changes to the graphical console initialization broke the initial
CHR_EVENT_RESET distribution. The reset BHs generated on char device
initialization are now already consumed during machine init (ide init
... -> qemu_aio_wait -> qemu_bh_poll). Therefore, this patch moves the
initial qemu_chr_reset calls into a separate funtion which is called
after machine init.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6692 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 19:42:04 +00:00
aliguori
8ae0978ed5 Fix cpuid KVM crash on i386 (Lubomir Rintel)
Cpuid should return into vec, not overwrite past address in count.
Changeset 6565 broke this.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6691 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 19:01:53 +00:00
aliguori
c0024a8257 lsi: add ISTAT1 register read (Ryan Harper)
SLES10 SP2 installer complains when probing a scsi disk and exits qemu
when failing to read one of the registers.

lsi_scsi: error: readb 0x15


-- 
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
ryanh@us.ibm.com



diffstat output:
 lsi53c895a.c |    2 ++
 1 files changed, 2 insertions(+)

Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
---
Subject: [PATCH] lsi: add ISTAT1 register read
From: Ryan Harper <ryanh@us.ibm.com>
Cc: kvm@vger.kernel.org

SLES10 SP2 installer complains when probing a scsi disk and exits qemu when
failing to read one of the registers.

lsi_scsi: error: readb 0x15

Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6690 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 19:01:46 +00:00
aliguori
e9af78a859 Add stable branch
git-svn-id: svn://svn.savannah.nongnu.org/qemu/branches/stable_0_10_0@6687 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 18:52:51 +00:00
aliguori
25c4fde177 Add property to tag
git-svn-id: svn://svn.savannah.nongnu.org/qemu/tags/release_0_10_0@6686 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05 18:51:35 +00:00
1267 changed files with 85918 additions and 253829 deletions

26
.gitignore vendored
View File

@@ -1,20 +1,9 @@
config-devices.*
config-all-devices.*
config-host.*
config-target.*
trace.h
trace.c
trace-dtrace.h
trace-dtrace.dtrace
*-timestamp
i386
*-softmmu
*-darwin-user
*-linux-user
*-bsd-user
libdis*
libhw32
libhw64
libuser
qemu-doc.html
qemu-tech.html
qemu-doc.info
@@ -27,13 +16,6 @@ qemu-img
qemu-nbd
qemu-nbd.8
qemu-nbd.pod
qemu-options.def
qemu-options.texi
qemu-img-cmds.texi
qemu-img-cmds.h
qemu-io
qemu-monitor.texi
QMP/qmp-commands.txt
.gdbinit
*.a
*.aux
@@ -43,9 +25,7 @@ QMP/qmp-commands.txt
*.fn
*.ky
*.log
*.pdf
*.pg
*.pyc
*.toc
*.tp
*.vr
@@ -55,8 +35,4 @@ QMP/qmp-commands.txt
patches
pc-bios/bios-pq/status
pc-bios/vgabios-pq/status
pc-bios/optionrom/linuxboot.bin
pc-bios/optionrom/multiboot.bin
pc-bios/optionrom/multiboot.raw
.stgit-*
cscope.*

6
.gitmodules vendored
View File

@@ -1,6 +0,0 @@
[submodule "roms/vgabios"]
path = roms/vgabios
url = git://git.qemu.org/vgabios.git/
[submodule "roms/seabios"]
path = roms/seabios
url = git://git.qemu.org/seabios.git/

View File

@@ -1,81 +0,0 @@
Qemu Coding Style
=================
Please use the script checkpatch.pl in the scripts directory to check
patches before submitting.
1. Whitespace
Of course, the most important aspect in any coding style is whitespace.
Crusty old coders who have trouble spotting the glasses on their noses
can tell the difference between a tab and eight spaces from a distance
of approximately fifteen parsecs. Many a flamewar have been fought and
lost on this issue.
QEMU indents are four spaces. Tabs are never used, except in Makefiles
where they have been irreversibly coded into the syntax.
Spaces of course are superior to tabs because:
- You have just one way to specify whitespace, not two. Ambiguity breeds
mistakes.
- The confusion surrounding 'use tabs to indent, spaces to justify' is gone.
- Tab indents push your code to the right, making your screen seriously
unbalanced.
- Tabs will be rendered incorrectly on editors who are misconfigured not
to use tab stops of eight positions.
- Tabs are rendered badly in patches, causing off-by-one errors in almost
every line.
- It is the QEMU coding style.
Do not leave whitespace dangling off the ends of lines.
2. Line width
Lines are 80 characters; not longer.
Rationale:
- Some people like to tile their 24" screens with a 6x4 matrix of 80x24
xterms and use vi in all of them. The best way to punish them is to
let them keep doing it.
- Code and especially patches is much more readable if limited to a sane
line length. Eighty is traditional.
- It is the QEMU coding style.
3. Naming
Variables are lower_case_with_underscores; easy to type and read. Structured
type names are in CamelCase; harder to type but standing out. Scalar type
names are lower_case_with_underscores_ending_with_a_t, like the POSIX
uint64_t and family. Note that this last convention contradicts POSIX
and is therefore likely to be changed.
When wrapping standard library functions, use the prefix qemu_ to alert
readers that they are seeing a wrapped version; otherwise avoid this prefix.
4. Block structure
Every indented statement is braced; even if the block contains just one
statement. The opening brace is on the line that contains the control
flow statement that introduces the new block; the closing brace is on the
same line as the else keyword, or on a line by itself if there is no else
keyword. Example:
if (a == 5) {
printf("a was 5.\n");
} else if (a == 6) {
printf("a was 6.\n");
} else {
printf("a was something else entirely.\n");
}
An exception is the opening brace for a function; for reasons of tradition
and clarity it comes on a line by itself:
void a_function(void)
{
do_something();
}
Rationale: a consistent (except for functions...) bracing style reduces
ambiguity and avoids needless churn when lines are added or removed.
Furthermore, it is the QEMU coding style.

108
Changelog
View File

@@ -1,72 +1,41 @@
version 0.12.0:
version 0.10.5:
- kvm: trim unsupported cpu features from cpuid (Avi Kivity)
- kvm: provide a better error message for -smp > 1 (Mark McLoughlin)
- Remove initrd printfs (Richard Jones)
- Initial variables found by valgrind (Jean-Christophe Dubois)
- Fix -initrd with > 4GB guests (Glauber Costa)
- Fix busy loop on live migration for certain platforms (Uri Lublin)
- Remove GCC 3.x requirements from docs (Hollis Blanchard)
- ETRAX: fixes for kernel command line, ethernet address, bmi (Edgar Iglesias)
- CRIS: Fix bmi (Edgar Iglesias)
- Fix bounce buffer errors (Avi Kivity)
- Fix regression in -kernel (Anthony Liguori)
- Update to SeaBIOS 0.5.0
- e1000: fix device link status in Linux (Anthony Liguori)
- monitor: fix QMP for balloon command (Luiz Capitulino)
- QMP: Return an empty dict by default (Luiz Capitulino)
- QMP: Only handle converted commands (Luiz Capitulino)
- pci: support PCI based option rom loading (Gerd Hoffman/Anthony Liguori)
- Fix backcompat for hotplug of SCSI controllers (Daniel P. Berrange)
- fdc: fix migration from 0.11 (Juan Quintela)
- vmware-vga: fix segv on cursor resize. (Dave Airlie)
- vmware-vga: various fixes (Dave Airlie/Anthony Liguori)
- qdev: improve property error reporting. (Gerd Hoffmann)
- fix vga names in default_list (Gerd Hoffmann)
- usb-host: check mon before using it. (Gerd Hoffmann)
- usb-net: use qdev for -usbdevice (Gerd Hoffmann)
- monitor: Catch printing to non-existent monitor (Luiz Capitulino)
- Avoid permanently disabled QEMU monitor when UNIX migration fails (Daniel P. Berrange)
- Fix loading of ELF multiboot kernels (Kevin Wolf)
- qemu-io: Fix memory leak (Kevin Wolf)
- Fix thinko in linuxboot.S (Paolo Bonzini)
- target-i386: Fix evaluation of DR7 register (Jan Kiszka)
- vnc: hextile: do not generate ForegroundSpecified and SubrectsColoured tiles (Anthony Liguori)
- S390: Bail out without KVM (Alexander Graf)
- S390: Don't tell guest we're updating config space (Alexander Graf)
- target-s390: Fail on unknown instructions (Alexander Graf)
- osdep: Fix runtime failure on older Linux kernels (Andre Przywara)
- Fix a make -j race (Juergen Lock)
- target-alpha: Fix generic ctz64. (Richard Henderson)
- s390: Fix buggy assignment (Stefan Weil)
- target-mips: fix user-mode emulation startup (Nathan Froyd)
- target-i386: Update CPUID feature set for TCG (Andre Przywara)
- s390: fix build on 32 bit host (Michael S. Tsirkin)
version 0.12.0-rc2:
version 0.10.4:
- Improve block range checks to remove integer overflow (Kevin Wolf)
- e1000: do not re-init PCI config space 0 (Amit Shah)
- fix AIO deletion race (Alex Graf)
- reset option roms on reboot (Glauber Costa)
- fix qcow2 corruption in cluster freeing (Gleb Natapov)
- Enable power button event generation (Gleb Natapov)
- v2: properly save kvm system time msr registers (Glauber Costa)
- convert more monitor commands to qmp (Luiz Capitulino)
- vnc: fix capslock tracking logic. (Gerd Hoffmann)
- QemuOpts: allow larger option values. (Gerd Hoffmann)
- scsi: fix drive hotplug. (Gerd Hoffmann)
- pci: don't hw_error() when no slot is available. (Gerd Hoffmann)
- pci: don't abort() when trying to hotplug with acpi off. (Gerd Hoffmann)
- allow default devices to be implemented in config file (Gerd Hoffman)
- vc: colorize chardev title line with blue background. (Gerd Hoffmann)
- chardev: make chardevs specified in config file work. (Gerd Hoffmann)
- qdev: also match bus name for global properties (Gerd Hoffmann)
- qdev: add command line option to set global defaults for properties. (Gerd Hoffmann)
- kvm: x86: Save/restore exception_index (Jan Kiszka)
- qdev: Replace device names containing whitespace (Markus Armbruster)
- fix rtc-td-hack on host without high-res timers (Gleb Natapov)
- virtio: verify features on load (Michael S. Tsirkin)
- vmware_vga: add rom file so that it boots. (Dave Airlie)
- Do not abort on qemu_malloc(0) in production builds (Anthony Liguori)
- Fix ARM userspace strex implementation. (Paul Brook)
- qemu: delete rule target on error (Michael S. Tsirkin)
- QMP: add human-readable description to error response (Markus Armbruster)
- convert more monitor commands to QError (Markus Armbruster)
- monitor: Fix double-prompt after "change vnc passwd BLA" (Markus Armbruster)
- monitor: do_cont(): Don't ask for passwords (Luiz Capitulino)
- monitor: Introduce 'block_passwd' command (Luiz Capitulino)
- pci: interrupt disable bit support (Michael S. Tsirkin)
- pci: interrupt status bit implementation (Michael S. Tsirkin)
- pci: prepare irq code for interrupt state (Michael S. Tsirkin)
- msix: function mask support (Michael S. Tsirkin)
- msix: macro rename for function mask support (Michael S. Tsirkin)
- cpuid: Fix multicore setup on Intel (Andre Przywara)
- kvm: x86: Fix initial kvm_has_msr_star (Jan Kiszka)
- Update OpenBIOS images to r640 (Aurelien Jarno)
version 0.10.3:
- fix AIO cancellations (Avi Kivity)
- fix live migration error path on incoming
- avoid SEGV on pci hotplug failure (Chris Wright)
- fix serial option in -drive
- support DDIM for option roms (Glauber Costa)
- avoid fork/exec on pre-2.6.27 kernels with KVM (Jan Kiszka)
- block-vpc: don't silently create smaller images than requested (Kevin Wolf)
- Fix non-ACPI timer interrupt routing (Beth Kon)
- hpet: fix emulation of HPET_TN_SETVAL (Jan Kiszka)
- kvm: fix cpuid initialization (Jan Kiszka)
- qcow2: fix corruption on little endian hosts (Kevin Wolf)
- avoid leaing memory on hot unplug (Mark McLoughlin)
- fix savevm/migration after hot unplug (Mark McLoughlin)
- Fix keyboard mapping on newer Xords with non-default keymaps (balrog)
- Make PCI config status register read-only (Anthony Liguori)
- Fix crash on resolution change -> screen dump -> vga redraw (Avi Kivity)
version 0.10.2:
@@ -86,6 +55,11 @@ version 0.10.2:
version 0.10.1:
- virtio-net: allow masking of notifications on empty queue (Alex Williamson)
- e1000: fix rx descriptor low threshold logic (Alex Willaimson)
- x86 tcg: add NULL checks to lsl instruction (Jan Kiszka)
- kvm vga: fix screen corruption with -std-vga and Windows (Avi Kivity)
- kvm vga: fix screen corruption with Ubuntu installations (Glauber Costa)
- virtio-net: check right return size on sg list (Alex Williamson)
- Make qemu_announce_self handle holes (live migration after hotplug)
(Marcelo Tosatti)

125
HACKING
View File

@@ -1,125 +0,0 @@
1. Preprocessor
For variadic macros, stick with this C99-like syntax:
#define DPRINTF(fmt, ...) \
do { printf("IRQ: " fmt, ## __VA_ARGS__); } while (0)
2. C types
It should be common sense to use the right type, but we have collected
a few useful guidelines here.
2.1. Scalars
If you're using "int" or "long", odds are good that there's a better type.
If a variable is counting something, it should be declared with an
unsigned type.
If it's host memory-size related, size_t should be a good choice (use
ssize_t only if required). Guest RAM memory offsets must use ram_addr_t,
but only for RAM, it may not cover whole guest address space.
If it's file-size related, use off_t.
If it's file-offset related (i.e., signed), use off_t.
If it's just counting small numbers use "unsigned int";
(on all but oddball embedded systems, you can assume that that
type is at least four bytes wide).
In the event that you require a specific width, use a standard type
like int32_t, uint32_t, uint64_t, etc. The specific types are
mandatory for VMState fields.
Don't use Linux kernel internal types like u32, __u32 or __le32.
Use target_phys_addr_t for guest physical addresses except pcibus_t
for PCI addresses. In addition, ram_addr_t is a QEMU internal address
space that maps guest RAM physical addresses into an intermediate
address space that can map to host virtual address spaces. Generally
speaking, the size of guest memory can always fit into ram_addr_t but
it would not be correct to store an actual guest physical address in a
ram_addr_t.
Use target_ulong (or abi_ulong) for CPU virtual addresses, however
devices should not need to use target_ulong.
Of course, take all of the above with a grain of salt. If you're about
to use some system interface that requires a type like size_t, pid_t or
off_t, use matching types for any corresponding variables.
Also, if you try to use e.g., "unsigned int" as a type, and that
conflicts with the signedness of a related variable, sometimes
it's best just to use the *wrong* type, if "pulling the thread"
and fixing all related variables would be too invasive.
Finally, while using descriptive types is important, be careful not to
go overboard. If whatever you're doing causes warnings, or requires
casts, then reconsider or ask for help.
2.2. Pointers
Ensure that all of your pointers are "const-correct".
Unless a pointer is used to modify the pointed-to storage,
give it the "const" attribute. That way, the reader knows
up-front that this is a read-only pointer. Perhaps more
importantly, if we're diligent about this, when you see a non-const
pointer, you're guaranteed that it is used to modify the storage
it points to, or it is aliased to another pointer that is.
2.3. Typedefs
Typedefs are used to eliminate the redundant 'struct' keyword.
2.4. Reserved namespaces in C and POSIX
Underscore capital, double underscore, and underscore 't' suffixes should be
avoided.
3. Low level memory management
Use of the malloc/free/realloc/calloc/valloc/memalign/posix_memalign
APIs is not allowed in the QEMU codebase. Instead of these routines,
use the replacement qemu_malloc/qemu_mallocz/qemu_realloc/qemu_free or
qemu_vmalloc/qemu_memalign/qemu_vfree APIs.
Please note that NULL check for the qemu_malloc result is redundant and
that qemu_malloc() call with zero size is not allowed.
Memory allocated by qemu_vmalloc or qemu_memalign must be freed with
qemu_vfree, since breaking this will cause problems on Win32 and user
emulators.
4. String manipulation
Do not use the strncpy function. According to the man page, it does
*not* guarantee a NULL-terminated buffer, which makes it extremely dangerous
to use. Instead, use functionally equivalent function:
void pstrcpy(char *buf, int buf_size, const char *str)
Don't use strcat because it can't check for buffer overflows, but:
char *pstrcat(char *buf, int buf_size, const char *s)
The same limitation exists with sprintf and vsprintf, so use snprintf and
vsnprintf.
QEMU provides other useful string functions:
int strstart(const char *str, const char *val, const char **ptr)
int stristart(const char *str, const char *val, const char **ptr)
int qemu_strnlen(const char *s, int max_len)
There are also replacement character processing macros for isxyz and toxyz,
so instead of e.g. isalnum you should use qemu_isalnum.
Because of the memory management rules, you must use qemu_strdup/qemu_strndup
instead of plain strdup/strndup.
5. Printf-style functions
Whenever you add a new printf-style function, i.e., one with a format
string argument and following "..." in its prototype, be sure to use
gcc's printf attribute directive in the prototype.
This makes it so gcc's -Wformat and -Wformat-security options can do
their jobs and cross-check format strings with the number and types
of arguments.
Currently many functions in QEMU are not following this rule but
patches to add the attribute would be very much appreciated.

View File

@@ -1,489 +1,82 @@
QEMU Maintainers
================
The intention of this file is not to establish who owns what portions of the
code base, but to provide a set of names that developers can consult when they
have a question about a particular subset and also to provide a set of names
to be CC'd when submitting a patch to obtain appropriate review.
In general, if you have a question about inclusion of a patch, you should
consult qemu-devel and not any specific individual privately.
Descriptions of section entries:
M: Mail patches to: FullName <address@domain>
L: Mailing list that is relevant to this area
W: Web-page with status/info
Q: Patchwork web based patch tracking system site
T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
Maintained: Someone actually looks after it.
Odd Fixes: It has a maintainer but they don't have time to do
much other than throw the odd patch in. See below..
Orphan: No current maintainer [but maybe you could take the
role as you write your new code].
Obsolete: Old code. Something tagged obsolete generally means
it has been replaced by a better system and you
should be using that.
F: Files and directories with wildcard patterns.
A trailing slash includes all files and subdirectory files.
F: drivers/net/ all files in and below drivers/net
F: drivers/net/* all files in drivers/net, but not below
F: */net/* all files in "any top level directory"/net
One pattern per line. Multiple F: lines acceptable.
X: Files and directories that are NOT maintained, same rules as F:
Files exclusions are tested before file matches.
Can be useful for excluding a specific subdirectory, for instance:
F: net/
X: net/ipv6/
matches all files in and below net excluding net/ipv6/
K: Keyword perl extended regex pattern to match content in a
patch or file. For instance:
K: of_get_profile
matches patches or files that contain "of_get_profile"
K: \b(printk|pr_(info|err))\b
matches patches or files that contain one or more of the words
printk, pr_info or pr_err
One regex pattern per line. Multiple K: lines acceptable.
General Project Administration
------------------------------
M: Anthony Liguori <aliguori@us.ibm.com>
M: Paul Brook <paul@codesourcery.com>
Guest CPU cores (TCG):
----------------------
Alpha
M: qemu-devel@nongnu.org
S: Orphan
F: target-alpha/
ARM
M: Paul Brook <paul@codesourcery.com>
S: Maintained
F: target-arm/
CRIS
M: Edgar E. Iglesias <edgar.iglesias@gmail.com>
S: Maintained
F: target-cris/
M68K
M: Paul Brook <paul@codesourcery.com>
S: Maintained
F: target-m68k/
MicroBlaze
M: Edgar E. Iglesias <edgar.iglesias@gmail.com>
S: Maintained
F: target-microblaze/
MIPS
M: Aurelien Jarno <aurelien@aurel32.net>
S: Maintained
F: target-mips/
PowerPC
M: Alexander Graf <agraf@suse.de>
S: Maintained
F: target-ppc/
S390
M: Alexander Graf <agraf@suse.de>
S: Maintained
F: target-s390x/
SH4
M: Aurelien Jarno <aurelien@aurel32.net>
S: Maintained
F: target-sh4/
SPARC
M: Blue Swirl <blauwirbel@gmail.com>
S: Maintained
F: target-sparc/
X86
M: qemu-devel@nongnu.org
S: Odd Fixes
F: target-i386/
Guest CPU Cores (KVM):
----------------------
Overall
M: Avi Kivity <avi@redhat.com>
M: Marcelo Tosatti <mtosatti@redhat.com>
L: kvm@vger.kernel.org
S: Supported
F: kvm-*
F: */kvm.*
PPC
M: Alexander Graf <agraf@suse.de>
S: Maintained
F: target-ppc/kvm.c
S390
M: Alexander Graf <agraf@suse.de>
S: Maintained
F: target-s390x/kvm.c
X86
M: Avi Kivity <avi@redhat.com>
M: Marcelo Tosatti <mtosatti@redhat.com>
L: kvm@vger.kernel.org
S: Supported
F: target-i386/kvm.c
ARM Machines
------------
Gumstix
M: qemu-devel@nongnu.org
S: Orphan
F: hw/gumstix.c
Integrator CP
M: Paul Brook <paul@codesourcery.com>
S: Maintained
F: hw/integratorcp.c
Mainstone
M: qemu-devel@nongnu.org
S: Orphan
F: hw/mainstone.c
Musicpal
M: Jan Kiszka <jan.kiszka@web.de>
S: Maintained
F: hw/musicpal.c
nSeries
M: Andrzej Zaborowski <balrogg@gmail.com>
S: Maintained
F: hw/nseries.c
Palm
M: Andrzej Zaborowski <balrogg@gmail.com>
S: Maintained
F: hw/palm.c
Real View
M: Paul Brook <paul@codesourcery.com>
S: Maintained
F: hw/realview*
Spitz
M: Andrzej Zaborowski <balrogg@gmail.com>
S: Maintained
F: hw/spitz.c
Stellaris
M: Paul Brook <paul@codesourcery.com>
S: Maintained
F: hw/stellaris.c
Versatile PB
M: Paul Brook <paul@codesourcery.com>
S: Maintained
F: hw/versatilepb.c
CRIS Machines
-------------
Axis Dev88
M: Edgar E. Iglesias <edgar.iglesias@gmail.com>
S: Maintained
F: hw/axis_dev88.c
etraxfs
M: Edgar E. Iglesias <edgar.iglesias@gmail.com>
S: Maintained
F: hw/etraxfs.c
M68K Machines
-------------
an5206
M: Paul Brook <paul@codesourcery.com>
S: Maintained
F: hw/an5206.c
dummy_m68k
M: Paul Brook <paul@codesourcery.com>
S: Maintained
F: hw/dummy_m68k.c
mcf5208
M: Paul Brook <paul@codesourcery.com>
S: Maintained
F: hw/mcf5208.c
MicroBlaze Machines
-------------------
petalogix_s3adsp1800
M: Edgar E. Iglesias <edgar.iglesias@gmail.com>
S: Maintained
F: hw/petalogix_s3adsp1800.c
MIPS Machines
-------------
Jazz
M: Hervé Poussineau <hpoussin@reactos.org>
S: Maintained
F: hw/mips_jazz.c
Malta
M: Aurelien Jarno <aurelien@aurel32.net>
S: Maintained
F: hw/mips_malta.c
Mipssim
M: qemu-devel@nongnu.org
S: Orphan
F: hw/mips_mipssim.c
R4000
M: Aurelien Jarno <aurelien@aurel32.net>
S: Maintained
F: hw/mips_r4k.c
PowerPC Machines
Project leaders:
----------------
405
M: Alexander Graf <agraf@suse.de>
S: Maintained
F: hw/ppc405_boards.c
New World
M: Alexander Graf <agraf@suse.de>
S: Maintained
F: hw/ppc_newworld.c
Fabrice Bellard
Paul Brook
Old World
M: Alexander Graf <agraf@suse.de>
S: Maintained
F: hw/ppc_oldworld.c
Prep
M: qemu-devel@nongnu.org
S: Orphan
F: hw/ppc_prep.c
SH4 Machines
------------
R2D
M: Magnus Damm <magnus.damm@gmail.com>
S: Maintained
F: hw/r2d.c
Shix
M: Magnus Damm <magnus.damm@gmail.com>
S: Orphan
F: hw/shix.c
SPARC Machines
--------------
Sun4m
M: Blue Swirl <blauwirbel@gmail.com>
S: Maintained
F: hw/sun4m.c
Sun4u
M: Blue Swirl <blauwirbel@gmail.com>
S: Maintained
F: hw/sun4u.c
S390 Machines
-------------
S390 Virtio
M: Alexander Graf <agraf@suse.de>
S: Maintained
F: hw/s390-*.c
X86 Machines
------------
PC
M: Anthony Liguori <aliguori@us.ibm.com>
S: Supported
F: hw/pc.[ch] hw/pc_piix.c
Devices
-------
IDE
M: Kevin Wolf <kwolf@redhat.com>
S: Odd Fixes
F: hw/ide/
PCI
M: Michael S. Tsirkin <mst@redhat.com>
S: Supported
F: hw/pci*
F: hw/piix*
SCSI
M: Paul Brook <paul@codesourcery.com>
M: Kevin Wolf <kwolf@redhat.com>
S: Odd Fixes
F: hw/lsi53c895a.c
F: hw/scsi*
USB
M: Gerd Hoffmann <kraxel@redhat.com>
S: Maintained
F: hw/usb*
vhost
M: Michael S. Tsirkin <mst@redhat.com>
S: Supported
F: hw/vhost*
virtio
M: Anthony Liguori <aliguori@us.ibm.com>
S: Supported
F: hw/virtio*
virtio-9p
M: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
S: Supported
F: hw/virtio-9p*
virtio-blk
M: Kevin Wolf <kwolf@redhat.com>
S: Supported
F: hw/virtio-blk*
virtio-serial
M: Amit Shah <amit.shah@redhat.com>
S: Supported
F: hw/virtio-serial*
F: hw/virtio-console*
Subsystems
CPU cores:
----------
Audio
M: Vassili Karpov (malc) <av1474@comtv.ru>
S: Maintained
F: audio/
Block
M: Kevin Wolf <kwolf@redhat.com>
S: Supported
F: block*
F: block/
x86 Fabrice Bellard
ARM Paul Brook
SPARC Blue Swirl
MIPS Thiemo Seufer
PowerPC ?
M68K Paul Brook
SH4 ?
CRIS Edgar E. Iglesias
Alpha ?
Character Devices
M: Anthony Liguori <aliguori@us.ibm.com>
S: Maintained
F: qemu-char.c
GDB stub
M: qemu-devel@nongnu.org
S: Odd Fixes
F: gdbstub*
F: gdb-xml/
SPICE
M: Gerd Hoffmann <kraxel@redhat.com>
S: Supported
F: ui/qemu-spice.h
F: ui/spice-*.c
F: audio/spiceaudio.c
F: hw/qxl*
Graphics
M: Anthony Liguori <aliguori@us.ibm.com>
S: Maintained
F: ui/
Main loop
M: Anthony Liguori <aliguori@us.ibm.com>
S: Supported
F: vl.c
Monitor (QMP/HMP)
M: Luiz Capitulino <lcapitulino@redhat.com>
M: Markus Armbruster <armbru@redhat.com>
S: Supported
F: monitor.c
Network device layer
M: Anthony Liguori <aliguori@us.ibm.com>
M: Mark McLoughlin <markmc@redhat.com>
S: Maintained
F: net/
SLIRP
M: qemu-devel@nongnu.org
S: Orphan
F: slirp/
Usermode Emulation
------------------
BSD user
M: Blue Swirl <blauwirbel@gmail.com>
S: Maintained
F: bsd-user/
Darwin user
M: qemu-devel@nongnu.org
S: Orphan
F: darwin-user/
Linux user
M: Riku Voipio <riku.voipio@iki.fi>
S: Maintained
F: linux-user/
Tiny Code Generator (TCG)
Machines (sorted by CPU):
-------------------------
Common code
M: qemu-devel@nongnu.org
S: Maintained
F: tcg/
ARM target
M: Andrzej Zaborowski <balrogg@gmail.com>
S: Maintained
F: tcg/arm/
x86
pc.c Fabrice Bellard (new maintainer needed)
ARM
integratorcp.c Paul Brook
versatilepb.c Paul Brook
Real View Paul Brook
spitz.c Andrzej Zaborowski
palm.c Andrzej Zaborowski
nseries.c Andrzej Zaborowski
stellaris.c Paul Brook
gumstix.c Thorsten Zitterell
mainstone.c Armin Kuster
musicpal.c Jan Kiszka
SPARC
sun4u.c Blue Swirl
sun4m.c Blue Swirl
MIPS
mips_r4k.c Aurelien Jarno
mips_malta.c Aurelien Jarno
mips_jazz.c Hervé Poussineau
mips_mipssim.c Thiemo Seufer
PowerPC
ppc_prep.c ?
ppc_oldworld.c Fabrice Bellard
ppc_chrp.c Fabrice Bellard
ppc405_boards.c ?
M86K
mcf5208.c Paul Brook
an5206.c Paul Brook
dummy_m68k.c Paul Brook
SH4
shix.c ?
r2d.c Magnus Damm
CRIS
etraxfs.c Edgar E. Iglesias
Alpha
HPPA target
M: Richard Henderson <rth@twiddle.net>
S: Maintained
F: tcg/hppa/
Generic Subsystems:
-------------------
i386 target
M: qemu-devel@nongnu.org
S: Maintained
F: tcg/i386/
IA64 target
M: Aurelien Jarno <aurelien@aurel32.net>
S: Maintained
F: tcg/ia64/
MIPS target
M: Aurelien Jarno <aurelien@aurel32.ne>
S: Maintained
F: tcg/mips/
PPC
M: Vassili Karpov (malc) <av1474@comtv.ru>
S: Maintained
F: tcg/ppc/
PPC64 target
M: Vassili Karpov (malc) <av1474@comtv.ru>
S: Maintained
F: tcg/ppc64/
S390 target
M: Alexander Graf <agraf@suse.de>
M: Richard Henderson <rth@twiddle.net>
S: Maintained
F: tcg/s390/
SPARC target
M: Blue Swirl <blauwirbel@gmail.com>
S: Maintained
F: tcg/sparc/
Dynamic translator Fabrice Bellard
Main loop Fabrice Bellard (new maintainer needed)
TCG Fabrice Bellard
kqemu interface Fabrice Bellard
IDE device ?
SCSI device Paul Brook
PCI layer ?
USB layer ?
Block layer ?
Graphic layer ?
Audio device layer Vassili Karpov (malc)
Character device layer ?
Network device layer ?
GDB stub ?
Linux user ?
Darwin user ?
SLIRP ?

468
Makefile
View File

@@ -1,201 +1,208 @@
# Makefile for QEMU.
GENERATED_HEADERS = config-host.h trace.h qemu-options.def
ifeq ($(TRACE_BACKEND),dtrace)
GENERATED_HEADERS += trace-dtrace.h
endif
ifneq ($(wildcard config-host.mak),)
# Put the all: rule here so that config-host.mak can contain dependencies.
all: build-all
include config-host.mak
include $(SRC_PATH)/rules.mak
config-host.mak: $(SRC_PATH)/configure
@echo $@ is out-of-date, running configure
@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
else
config-host.mak:
@echo "Please call configure before running make!"
@exit 1
endif
# Don't try to regenerate Makefile or configure
# We don't generate any of them
Makefile: ;
configure: ;
.PHONY: all clean cscope distclean dvi html info install install-doc \
pdf recurse-all speed tar tarbin test build-all
recurse-all speed tar tarbin test
$(call set-vpath, $(SRC_PATH):$(SRC_PATH)/hw)
VPATH=$(SRC_PATH):$(SRC_PATH)/hw
LIBS+=-lz $(LIBS_TOOLS)
CFLAGS += $(OS_CFLAGS) $(ARCH_CFLAGS)
LDFLAGS += $(OS_LDFLAGS) $(ARCH_LDFLAGS)
CPPFLAGS += -I. -I$(SRC_PATH) -MMD -MP -MT $@
CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
LIBS=
ifdef CONFIG_STATIC
LDFLAGS += -static
endif
ifdef BUILD_DOCS
DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 QMP/qmp-commands.txt
DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8
else
DOCS=
endif
SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %/config-devices.mak.d, $(TARGET_DIRS))
LIBS+=$(AIOLIBS)
config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
$(call quiet-command,cat $(SUBDIR_DEVICES_MAK) | grep =y | sort -u > $@," GEN $@")
ifdef CONFIG_SOLARIS
LIBS+=-lsocket -lnsl -lresolv
endif
-include $(SUBDIR_DEVICES_MAK_DEP)
ifdef CONFIG_WIN32
LIBS+=-lwinmm -lws2_32 -liphlpapi
endif
%/config-devices.mak: default-configs/%.mak
$(call quiet-command,$(SHELL) $(SRC_PATH)/scripts/make_device_config.sh $@ $<, " GEN $@")
@if test -f $@; then \
if cmp -s $@.old $@; then \
mv $@.tmp $@; \
cp -p $@ $@.old; \
else \
if test -f $@.old; then \
echo "WARNING: $@ (user modified) out of date.";\
else \
echo "WARNING: $@ out of date.";\
fi; \
echo "Run \"make defconfig\" to regenerate."; \
rm $@.tmp; \
fi; \
else \
mv $@.tmp $@; \
cp -p $@ $@.old; \
fi
defconfig:
rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
-include config-all-devices.mak
build-all: $(DOCS) $(TOOLS) recurse-all
config-host.h: config-host.h-timestamp
config-host.h-timestamp: config-host.mak
qemu-options.def: $(SRC_PATH)/qemu-options.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $@")
all: $(TOOLS) $(DOCS) recurse-all
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
subdir-%: $(GENERATED_HEADERS)
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
subdir-%:
$(call quiet-command,$(MAKE) -C $* V="$(V)" TARGET_DIR="$*/" all,)
ifneq ($(wildcard config-host.mak),)
include $(SRC_PATH)/Makefile.objs
endif
$(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
$(filter %-user,$(SUBDIR_RULES)): libqemu_user.a
$(common-obj-y): $(GENERATED_HEADERS)
$(filter %-softmmu,$(SUBDIR_RULES)): $(trace-obj-y) $(common-obj-y) subdir-libdis
recurse-all: $(SUBDIR_RULES)
$(filter %-user,$(SUBDIR_RULES)): $(GENERATED_HEADERS) $(trace-obj-y) subdir-libdis-user subdir-libuser
#######################################################################
# BLOCK_OBJS is code used by both qemu system emulation and qemu-img
ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
romsubdir-%:
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",)
BLOCK_OBJS=cutils.o qemu-malloc.o
BLOCK_OBJS+=block-cow.o block-qcow.o aes.o block-vmdk.o block-cloop.o
BLOCK_OBJS+=block-dmg.o block-bochs.o block-vpc.o block-vvfat.o
BLOCK_OBJS+=block-qcow2.o block-parallels.o block-nbd.o
BLOCK_OBJS+=nbd.o block.o aio.o
ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS)
QEMU_CFLAGS+=$(CURL_CFLAGS)
ui/cocoa.o: ui/cocoa.m
ui/sdl.o audio/sdlaudio.o ui/sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS)
ui/vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
ifeq ($(TRACE_BACKEND),dtrace)
trace.h: trace.h-timestamp trace-dtrace.h
ifdef CONFIG_WIN32
BLOCK_OBJS += block-raw-win32.o
else
trace.h: trace.h-timestamp
ifdef CONFIG_AIO
BLOCK_OBJS += posix-aio-compat.o
endif
BLOCK_OBJS += block-raw-posix.o
endif
trace.h-timestamp: $(SRC_PATH)/trace-events config-host.mak
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -h < $< > $@," GEN trace.h")
@cmp -s $@ trace.h || cp $@ trace.h
trace.c: trace.c-timestamp
trace.c-timestamp: $(SRC_PATH)/trace-events config-host.mak
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -c < $< > $@," GEN trace.c")
@cmp -s $@ trace.c || cp $@ trace.c
######################################################################
# libqemu_common.a: Target independent part of system emulation. The
# long term path is to suppress *all* target specific code in case of
# system emulation, i.e. a single QEMU executable should support all
# CPUs and machines.
trace.o: trace.c $(GENERATED_HEADERS)
OBJS=$(BLOCK_OBJS)
OBJS+=readline.o console.o
trace-dtrace.h: trace-dtrace.dtrace
$(call quiet-command,dtrace -o $@ -h -s $<, " GEN trace-dtrace.h")
OBJS+=irq.o
OBJS+=i2c.o smbus.o smbus_eeprom.o max7310.o max111x.o wm8750.o
OBJS+=ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
OBJS+=tmp105.o lm832x.o
OBJS+=scsi-disk.o cdrom.o
OBJS+=scsi-generic.o
OBJS+=usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
OBJS+=usb-serial.o usb-net.o
OBJS+=sd.o ssi-sd.o
OBJS+=bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
OBJS+=buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
OBJS+=qemu-char.o aio.o net-checksum.o savevm.o cache-utils.o
# Normal practice is to name DTrace probe file with a '.d' extension
# but that gets picked up by QEMU's Makefile as an external dependancy
# rule file. So we use '.dtrace' instead
trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events config-host.mak
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -d < $< > $@," GEN trace-dtrace.dtrace")
@cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
ifdef CONFIG_BRLAPI
OBJS+= baum.o
LIBS+=-lbrlapi
endif
trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS)
$(call quiet-command,dtrace -o $@ -G -s $<, " GEN trace-dtrace.o")
ifdef CONFIG_WIN32
OBJS+=tap-win32.o
else
OBJS+=migration-exec.o
endif
simpletrace.o: simpletrace.c $(GENERATED_HEADERS)
AUDIO_OBJS = audio.o noaudio.o wavaudio.o mixeng.o
ifdef CONFIG_SDL
AUDIO_OBJS += sdlaudio.o
endif
ifdef CONFIG_OSS
AUDIO_OBJS += ossaudio.o
endif
ifdef CONFIG_COREAUDIO
AUDIO_OBJS += coreaudio.o
AUDIO_PT = yes
endif
ifdef CONFIG_ALSA
AUDIO_OBJS += alsaaudio.o
endif
ifdef CONFIG_DSOUND
AUDIO_OBJS += dsoundaudio.o
endif
ifdef CONFIG_FMOD
AUDIO_OBJS += fmodaudio.o
audio/audio.o audio/fmodaudio.o: CPPFLAGS := -I$(CONFIG_FMOD_INC) $(CPPFLAGS)
endif
ifdef CONFIG_ESD
AUDIO_PT = yes
AUDIO_PT_INT = yes
AUDIO_OBJS += esdaudio.o
endif
ifdef CONFIG_PA
AUDIO_PT = yes
AUDIO_PT_INT = yes
AUDIO_OBJS += paaudio.o
endif
ifdef AUDIO_PT
LDFLAGS += -pthread
endif
ifdef AUDIO_PT_INT
AUDIO_OBJS += audio_pt_int.o
endif
AUDIO_OBJS+= wavcapture.o
OBJS+=$(addprefix audio/, $(AUDIO_OBJS))
version.o: $(SRC_PATH)/version.rc config-host.mak
$(call quiet-command,$(WINDRES) -I. -o $@ $<," RC $(TARGET_DIR)$@")
ifdef CONFIG_SDL
OBJS+=sdl.o x_keymap.o
endif
ifdef CONFIG_CURSES
OBJS+=curses.o
endif
OBJS+=vnc.o d3des.o
ifdef CONFIG_COCOA
OBJS+=cocoa.o
endif
ifdef CONFIG_SLIRP
CPPFLAGS+=-I$(SRC_PATH)/slirp
SLIRP_OBJS=cksum.o if.o ip_icmp.o ip_input.o ip_output.o \
slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o \
tcp_subr.o tcp_timer.o udp.o bootp.o debug.o tftp.o
OBJS+=$(addprefix slirp/, $(SLIRP_OBJS))
endif
LIBS+=$(VDE_LIBS)
cocoa.o: cocoa.m
sdl.o: sdl.c keymaps.c sdl_keysym.h
sdl.o audio/sdlaudio.o: CFLAGS += $(SDL_CFLAGS)
vnc.o: vnc.c keymaps.c sdl_keysym.h vnchextile.h d3des.c d3des.h
vnc.o: CFLAGS += $(CONFIG_VNC_TLS_CFLAGS)
curses.o: curses.c keymaps.c curses_keys.h
bt-host.o: CFLAGS += $(CONFIG_BLUEZ_CFLAGS)
libqemu_common.a: $(OBJS)
#######################################################################
# USER_OBJS is code used by qemu userspace emulation
USER_OBJS=cutils.o cache-utils.o
libqemu_user.a: $(USER_OBJS)
version-obj-$(CONFIG_WIN32) += version.o
######################################################################
qemu-img.o: qemu-img-cmds.h
qemu-img.o qemu-tool.o qemu-nbd.o qemu-io.o cmd.o: $(GENERATED_HEADERS)
qemu-img$(EXESUF): qemu-img.o qemu-tool.o osdep.o $(BLOCK_OBJS)
qemu-img$(EXESUF): qemu-img.o qemu-tool.o qemu-error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y) qemu-timer-common.o
qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o osdep.o $(BLOCK_OBJS)
qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o qemu-error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y) qemu-timer-common.o
qemu-io$(EXESUF): qemu-io.o cmd.o qemu-tool.o qemu-error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y) qemu-timer-common.o
qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $@")
check-qint.o check-qstring.o check-qdict.o check-qlist.o check-qfloat.o check-qjson.o: $(GENERATED_HEADERS)
CHECK_PROG_DEPS = qemu-malloc.o $(oslib-obj-y) $(trace-obj-y)
check-qint: check-qint.o qint.o $(CHECK_PROG_DEPS)
check-qstring: check-qstring.o qstring.o $(CHECK_PROG_DEPS)
check-qdict: check-qdict.o qdict.o qfloat.o qint.o qstring.o qbool.o qlist.o $(CHECK_PROG_DEPS)
check-qlist: check-qlist.o qlist.o qint.o $(CHECK_PROG_DEPS)
check-qfloat: check-qfloat.o qfloat.o $(CHECK_PROG_DEPS)
check-qjson: check-qjson.o qfloat.o qint.o qdict.o qstring.o qlist.o qbool.o qjson.o json-streamer.o json-lexer.o json-parser.o $(CHECK_PROG_DEPS)
qemu-img$(EXESUF) qemu-nbd$(EXESUF): LIBS += -lz
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f qemu-options.def
rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d
rm -f qemu-img-cmds.h
rm -f trace.c trace.h trace.c-timestamp trace.h-timestamp
rm -f trace-dtrace.dtrace trace-dtrace.dtrace-timestamp
rm -f trace-dtrace.h trace-dtrace.h-timestamp
rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d
$(MAKE) -C tests clean
for d in $(ALL_SUBDIRS) libhw32 libhw64 libuser libdis libdis-user; do \
if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
rm -f $$d/qemu-options.def; \
for d in $(TARGET_DIRS); do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
distclean: clean
rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi
rm -f config-all-devices.mak
rm -f roms/seabios/config.mak roms/vgabios/config.mak
rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.dvi qemu-doc.fn qemu-doc.info qemu-doc.ky qemu-doc.log qemu-doc.pdf qemu-doc.pg qemu-doc.toc qemu-doc.tp qemu-doc.vr
rm -f qemu-tech.info qemu-tech.aux qemu-tech.cp qemu-tech.dvi qemu-tech.fn qemu-tech.info qemu-tech.ky qemu-tech.log qemu-tech.pdf qemu-tech.pg qemu-tech.toc qemu-tech.tp qemu-tech.vr
for d in $(TARGET_DIRS) libhw32 libhw64 libuser libdis libdis-user; do \
rm -f config-host.mak config-host.h $(DOCS)
rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
for d in $(TARGET_DIRS); do \
rm -rf $$d || exit 1 ; \
done
@@ -204,49 +211,41 @@ ar de en-us fi fr-be hr it lv nl pl ru th \
common de-ch es fo fr-ca hu ja mk nl-be pt sl tr
ifdef INSTALL_BLOBS
BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin \
vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin \
ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc \
gpxe-eepro100-80861209.rom \
pxe-e1000.bin \
pxe-ne2k_pci.bin pxe-pcnet.bin \
pxe-rtl8139.bin pxe-virtio.bin \
bamboo.dtb petalogix-s3adsp1800.dtb \
multiboot.bin linuxboot.bin \
s390-zipl.rom
BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \
video.x openbios-sparc32 openbios-sparc64 openbios-ppc \
pxe-ne2k_pci.bin pxe-rtl8139.bin pxe-pcnet.bin pxe-e1000.bin \
bamboo.dtb
else
BLOBS=
endif
install-doc: $(DOCS)
$(INSTALL_DIR) "$(DESTDIR)$(docdir)"
$(INSTALL_DATA) qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)"
ifdef CONFIG_POSIX
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
mkdir -p "$(DESTDIR)$(docdir)"
$(INSTALL) -m 644 qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)"
ifndef CONFIG_WIN32
mkdir -p "$(DESTDIR)$(mandir)/man1"
$(INSTALL) -m 644 qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
mkdir -p "$(DESTDIR)$(mandir)/man8"
$(INSTALL) -m 644 qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
install-sysconfig:
$(INSTALL_DIR) "$(DESTDIR)$(sysconfdir)/qemu"
$(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf "$(DESTDIR)$(sysconfdir)/qemu"
install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig
$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
install: all $(if $(BUILD_DOCS),install-doc)
mkdir -p "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
$(INSTALL) -m 755 -s $(TOOLS) "$(DESTDIR)$(bindir)"
endif
ifneq ($(BLOBS),)
$(INSTALL_DIR) "$(DESTDIR)$(datadir)"
mkdir -p "$(DESTDIR)$(datadir)"
set -e; for x in $(BLOBS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
$(INSTALL) -m 644 $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
done
endif
$(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
ifndef CONFIG_WIN32
mkdir -p "$(DESTDIR)$(datadir)/keymaps"
set -e; for x in $(KEYMAPS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
$(INSTALL) -m 644 $(SRC_PATH)/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
done
endif
for d in $(TARGET_DIRS); do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
@@ -255,9 +254,8 @@ endif
test speed: all
$(MAKE) -C tests $@
.PHONY: TAGS
TAGS:
find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags
etags *.[ch] tests/*.[ch]
cscope:
rm -f ./cscope.*
@@ -265,60 +263,34 @@ cscope:
cscope -b
# documentation
MAKEINFO=makeinfo
MAKEINFOFLAGS=--no-headers --no-split --number-sections
TEXIFLAG=$(if $(V),,--quiet)
%.dvi: %.texi
$(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<," GEN $@")
%.html: %.texi
$(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) --html $< -o $@, \
" GEN $@")
texi2html -monolithic -number $<
%.info: %.texi
$(call quiet-command,$(MAKEINFO) $< -o $@," GEN $@")
makeinfo $< -o $@
%.pdf: %.texi
$(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<," GEN $@")
%.dvi: %.texi
texi2dvi $<
qemu-options.texi: $(SRC_PATH)/qemu-options.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
qemu.1: qemu-doc.texi
$(SRC_PATH)/texi2pod.pl $< qemu.pod
pod2man --section=1 --center=" " --release=" " qemu.pod > $@
qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
QMP/qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -q < $< > $@," GEN $@")
qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu.pod && \
pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
" GEN $@")
qemu-img.1: qemu-img.texi qemu-img-cmds.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-img.pod && \
pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
" GEN $@")
qemu-img.1: qemu-img.texi
$(SRC_PATH)/texi2pod.pl $< qemu-img.pod
pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@
qemu-nbd.8: qemu-nbd.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-nbd.pod && \
pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
" GEN $@")
$(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod
pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@
info: qemu-doc.info qemu-tech.info
dvi: qemu-doc.dvi qemu-tech.dvi
html: qemu-doc.html qemu-tech.html
info: qemu-doc.info qemu-tech.info
pdf: qemu-doc.pdf qemu-tech.pdf
qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \
qemu-img.texi qemu-nbd.texi qemu-options.texi \
qemu-monitor.texi qemu-img-cmds.texi
html: qemu-doc.html qemu-tech.html
qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi
VERSION ?= $(shell cat VERSION)
FILE = qemu-$(VERSION)
@@ -330,28 +302,48 @@ tar:
cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn
rm -rf /tmp/$(FILE)
SYSTEM_TARGETS=$(filter %-softmmu,$(TARGET_DIRS))
SYSTEM_PROGS=$(patsubst qemu-system-i386,qemu, \
$(patsubst %-softmmu,qemu-system-%, \
$(SYSTEM_TARGETS)))
USER_TARGETS=$(filter %-user,$(TARGET_DIRS))
USER_PROGS=$(patsubst %-bsd-user,qemu-%, \
$(patsubst %-darwin-user,qemu-%, \
$(patsubst %-linux-user,qemu-%, \
$(USER_TARGETS))))
# generate a binary distribution
tarbin:
cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
$(patsubst %,$(bindir)/%, $(SYSTEM_PROGS)) \
$(patsubst %,$(bindir)/%, $(USER_PROGS)) \
$(bindir)/qemu \
$(bindir)/qemu-system-x86_64 \
$(bindir)/qemu-system-arm \
$(bindir)/qemu-system-cris \
$(bindir)/qemu-system-m68k \
$(bindir)/qemu-system-mips \
$(bindir)/qemu-system-mipsel \
$(bindir)/qemu-system-mips64 \
$(bindir)/qemu-system-mips64el \
$(bindir)/qemu-system-ppc \
$(bindir)/qemu-system-ppcemb \
$(bindir)/qemu-system-ppc64 \
$(bindir)/qemu-system-sh4 \
$(bindir)/qemu-system-sh4eb \
$(bindir)/qemu-system-sparc \
$(bindir)/qemu-i386 \
$(bindir)/qemu-x86_64 \
$(bindir)/qemu-alpha \
$(bindir)/qemu-arm \
$(bindir)/qemu-armeb \
$(bindir)/qemu-cris \
$(bindir)/qemu-m68k \
$(bindir)/qemu-mips \
$(bindir)/qemu-mipsel \
$(bindir)/qemu-ppc \
$(bindir)/qemu-ppc64 \
$(bindir)/qemu-ppc64abi32 \
$(bindir)/qemu-sh4 \
$(bindir)/qemu-sh4eb \
$(bindir)/qemu-sparc \
$(bindir)/qemu-sparc64 \
$(bindir)/qemu-sparc32plus \
$(bindir)/qemu-img \
$(bindir)/qemu-nbd \
$(datadir)/bios.bin \
$(datadir)/vgabios.bin \
$(datadir)/vgabios-cirrus.bin \
$(datadir)/ppc_rom.bin \
$(datadir)/video.x \
$(datadir)/openbios-sparc32 \
$(datadir)/openbios-sparc64 \
$(datadir)/openbios-ppc \
@@ -366,4 +358,4 @@ tarbin:
$(mandir)/man8/qemu-nbd.8
# Include automatically generated dependency files
-include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d ui/*.d)
-include $(wildcard *.d audio/*.d slirp/*.d)

View File

@@ -1,23 +0,0 @@
# Makefile for disassemblers.
include ../config-host.mak
include config.mak
include $(SRC_PATH)/rules.mak
.PHONY: all
$(call set-vpath, $(SRC_PATH))
QEMU_CFLAGS+=-I..
include $(SRC_PATH)/Makefile.objs
all: $(libdis-y)
# Dummy command so that make thinks it has done something
@true
clean:
rm -f *.o *.d *.a *~
# Include automatically generated dependency files
-include $(wildcard *.d */*.d)

View File

@@ -1,24 +0,0 @@
# Makefile for qemu target independent devices.
include ../config-host.mak
include ../config-all-devices.mak
include config.mak
include $(SRC_PATH)/rules.mak
.PHONY: all
$(call set-vpath, $(SRC_PATH):$(SRC_PATH)/hw)
QEMU_CFLAGS+=-I.. -I$(SRC_PATH)/fpu
include $(SRC_PATH)/Makefile.objs
all: $(hw-obj-y)
# Dummy command so that make thinks it has done something
@true
clean:
rm -f *.o */*.o *.d */*.d *.a */*.a *~ */*~
# Include automatically generated dependency files
-include $(wildcard *.d */*.d)

View File

@@ -1,319 +0,0 @@
#######################################################################
# QObject
qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o
qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o
qobject-obj-y += qerror.o
#######################################################################
# oslib-obj-y is code depending on the OS (win32 vs posix)
oslib-obj-y = osdep.o
oslib-obj-$(CONFIG_WIN32) += oslib-win32.o
oslib-obj-$(CONFIG_POSIX) += oslib-posix.o
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
block-obj-y += nbd.o block.o aio.o aes.o qemu-config.o
block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o qcow2-cache.o
block-nested-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
block-nested-y += qed-check.o
block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
block-nested-$(CONFIG_WIN32) += raw-win32.o
block-nested-$(CONFIG_POSIX) += raw-posix.o
block-nested-$(CONFIG_CURL) += curl.o
block-nested-$(CONFIG_RBD) += rbd.o
block-obj-y += $(addprefix block/, $(block-nested-y))
net-obj-y = net.o
net-nested-y = queue.o checksum.o util.o
net-nested-y += socket.o
net-nested-y += dump.o
net-nested-$(CONFIG_POSIX) += tap.o
net-nested-$(CONFIG_LINUX) += tap-linux.o
net-nested-$(CONFIG_WIN32) += tap-win32.o
net-nested-$(CONFIG_BSD) += tap-bsd.o
net-nested-$(CONFIG_SOLARIS) += tap-solaris.o
net-nested-$(CONFIG_AIX) += tap-aix.o
net-nested-$(CONFIG_HAIKU) += tap-haiku.o
net-nested-$(CONFIG_SLIRP) += slirp.o
net-nested-$(CONFIG_VDE) += vde.o
net-obj-y += $(addprefix net/, $(net-nested-y))
ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS),yy)
# Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
# only pull in the actual virtio-9p device if we also enabled virtio.
CONFIG_REALLY_VIRTFS=y
endif
fsdev-nested-$(CONFIG_VIRTFS) = qemu-fsdev.o
fsdev-obj-$(CONFIG_VIRTFS) += $(addprefix fsdev/, $(fsdev-nested-y))
######################################################################
# libqemu_common.a: Target independent part of system emulation. The
# long term path is to suppress *all* target specific code in case of
# system emulation, i.e. a single QEMU executable should support all
# CPUs and machines.
common-obj-y = $(block-obj-y) blockdev.o
common-obj-y += $(net-obj-y)
common-obj-y += $(qobject-obj-y)
common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))
common-obj-y += readline.o console.o cursor.o async.o qemu-error.o
common-obj-y += $(oslib-obj-y)
common-obj-$(CONFIG_WIN32) += os-win32.o
common-obj-$(CONFIG_POSIX) += os-posix.o
common-obj-y += tcg-runtime.o host-utils.o
common-obj-y += irq.o ioport.o input.o
common-obj-$(CONFIG_PTIMER) += ptimer.o
common-obj-$(CONFIG_MAX7310) += max7310.o
common-obj-$(CONFIG_WM8750) += wm8750.o
common-obj-$(CONFIG_TWL92230) += twl92230.o
common-obj-$(CONFIG_TSC2005) += tsc2005.o
common-obj-$(CONFIG_LM832X) += lm832x.o
common-obj-$(CONFIG_TMP105) += tmp105.o
common-obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
common-obj-$(CONFIG_SSD0303) += ssd0303.o
common-obj-$(CONFIG_SSD0323) += ssd0323.o
common-obj-$(CONFIG_ADS7846) += ads7846.o
common-obj-$(CONFIG_MAX111X) += max111x.o
common-obj-$(CONFIG_DS1338) += ds1338.o
common-obj-y += i2c.o smbus.o smbus_eeprom.o
common-obj-y += eeprom93xx.o
common-obj-y += scsi-disk.o cdrom.o
common-obj-y += scsi-generic.o scsi-bus.o
common-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
common-obj-y += usb-serial.o usb-net.o usb-bus.o usb-desc.o
common-obj-$(CONFIG_SSI) += ssi.o
common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
common-obj-$(CONFIG_SD) += sd.o
common-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
common-obj-y += bt-hci-csr.o
common-obj-y += buffered_file.o migration.o migration-tcp.o qemu-sockets.o
common-obj-y += qemu-char.o savevm.o #aio.o
common-obj-y += msmouse.o ps2.o
common-obj-y += qdev.o qdev-properties.o
common-obj-y += block-migration.o
common-obj-y += pflib.o
common-obj-$(CONFIG_BRLAPI) += baum.o
common-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
common-obj-$(CONFIG_WIN32) += version.o
common-obj-$(CONFIG_SPICE) += ui/spice-core.o ui/spice-input.o ui/spice-display.o spice-qemu-char.o
audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
audio-obj-$(CONFIG_SDL) += sdlaudio.o
audio-obj-$(CONFIG_OSS) += ossaudio.o
audio-obj-$(CONFIG_SPICE) += spiceaudio.o
audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
audio-obj-$(CONFIG_ALSA) += alsaaudio.o
audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
audio-obj-$(CONFIG_FMOD) += fmodaudio.o
audio-obj-$(CONFIG_ESD) += esdaudio.o
audio-obj-$(CONFIG_PA) += paaudio.o
audio-obj-$(CONFIG_WINWAVE) += winwaveaudio.o
audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
audio-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o
audio-obj-y += wavcapture.o
common-obj-y += $(addprefix audio/, $(audio-obj-y))
ui-obj-y += keymaps.o
ui-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
ui-obj-$(CONFIG_CURSES) += curses.o
ui-obj-y += vnc.o d3des.o
ui-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
ui-obj-y += vnc-enc-tight.o vnc-palette.o
ui-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
ui-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
ui-obj-$(CONFIG_COCOA) += cocoa.o
ifdef CONFIG_VNC_THREAD
ui-obj-y += vnc-jobs-async.o
else
ui-obj-y += vnc-jobs-sync.o
endif
common-obj-y += $(addprefix ui/, $(ui-obj-y))
common-obj-y += iov.o acl.o
common-obj-$(CONFIG_THREAD) += qemu-thread.o
common-obj-$(CONFIG_IOTHREAD) += compatfd.o
common-obj-y += notify.o event_notifier.o
common-obj-y += qemu-timer.o qemu-timer-common.o
slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o
common-obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
# xen backend driver support
common-obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o
common-obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o
######################################################################
# libuser
user-obj-y =
user-obj-y += envlist.o path.o
user-obj-y += tcg-runtime.o host-utils.o
user-obj-y += cutils.o cache-utils.o
######################################################################
# libhw
hw-obj-y =
hw-obj-y += vl.o loader.o
hw-obj-$(CONFIG_VIRTIO) += virtio.o virtio-console.o
hw-obj-y += fw_cfg.o
hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
hw-obj-$(CONFIG_PCI) += msix.o msi.o
hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
hw-obj-y += watchdog.o
hw-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
hw-obj-$(CONFIG_ECC) += ecc.o
hw-obj-$(CONFIG_NAND) += nand.o
hw-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
hw-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
hw-obj-$(CONFIG_M48T59) += m48t59.o
hw-obj-$(CONFIG_ESCC) += escc.o
hw-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
hw-obj-$(CONFIG_SERIAL) += serial.o
hw-obj-$(CONFIG_PARALLEL) += parallel.o
hw-obj-$(CONFIG_I8254) += i8254.o
hw-obj-$(CONFIG_PCSPK) += pcspk.o
hw-obj-$(CONFIG_PCKBD) += pckbd.o
hw-obj-$(CONFIG_USB_UHCI) += usb-uhci.o
hw-obj-$(CONFIG_USB_OHCI) += usb-ohci.o
hw-obj-$(CONFIG_FDC) += fdc.o
hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o
hw-obj-$(CONFIG_DMA) += dma.o
# PPC devices
hw-obj-$(CONFIG_OPENPIC) += openpic.o
hw-obj-$(CONFIG_PREP_PCI) += prep_pci.o
# Mac shared devices
hw-obj-$(CONFIG_MACIO) += macio.o
hw-obj-$(CONFIG_CUDA) += cuda.o
hw-obj-$(CONFIG_ADB) += adb.o
hw-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o
hw-obj-$(CONFIG_MAC_DBDMA) += mac_dbdma.o
# OldWorld PowerMac
hw-obj-$(CONFIG_HEATHROW_PIC) += heathrow_pic.o
hw-obj-$(CONFIG_GRACKLE_PCI) += grackle_pci.o
# NewWorld PowerMac
hw-obj-$(CONFIG_UNIN_PCI) += unin_pci.o
hw-obj-$(CONFIG_DEC_PCI) += dec_pci.o
# PowerPC E500 boards
hw-obj-$(CONFIG_PPCE500_PCI) += ppce500_pci.o
# MIPS devices
hw-obj-$(CONFIG_PIIX4) += piix4.o
# PCI watchdog devices
hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o
hw-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o
# PCI network cards
hw-obj-$(CONFIG_NE2000_PCI) += ne2000.o
hw-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
hw-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
hw-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
hw-obj-$(CONFIG_E1000_PCI) += e1000.o
hw-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
hw-obj-$(CONFIG_SMC91C111) += smc91c111.o
hw-obj-$(CONFIG_LAN9118) += lan9118.o
hw-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
# IDE
hw-obj-$(CONFIG_IDE_CORE) += ide/core.o
hw-obj-$(CONFIG_IDE_QDEV) += ide/qdev.o
hw-obj-$(CONFIG_IDE_PCI) += ide/pci.o
hw-obj-$(CONFIG_IDE_ISA) += ide/isa.o
hw-obj-$(CONFIG_IDE_PIIX) += ide/piix.o
hw-obj-$(CONFIG_IDE_CMD646) += ide/cmd646.o
hw-obj-$(CONFIG_IDE_MACIO) += ide/macio.o
hw-obj-$(CONFIG_IDE_VIA) += ide/via.o
hw-obj-$(CONFIG_AHCI) += ide/ahci.o
hw-obj-$(CONFIG_AHCI) += ide/ich.o
# SCSI layer
hw-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
hw-obj-$(CONFIG_ESP) += esp.o
hw-obj-y += dma-helpers.o sysbus.o isa-bus.o
hw-obj-y += qdev-addr.o
# VGA
hw-obj-$(CONFIG_VGA_PCI) += vga-pci.o
hw-obj-$(CONFIG_VGA_ISA) += vga-isa.o
hw-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o
hw-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o
hw-obj-$(CONFIG_RC4030) += rc4030.o
hw-obj-$(CONFIG_DP8393X) += dp8393x.o
hw-obj-$(CONFIG_DS1225Y) += ds1225y.o
hw-obj-$(CONFIG_MIPSNET) += mipsnet.o
# Sound
sound-obj-y =
sound-obj-$(CONFIG_SB16) += sb16.o
sound-obj-$(CONFIG_ES1370) += es1370.o
sound-obj-$(CONFIG_AC97) += ac97.o
sound-obj-$(CONFIG_ADLIB) += fmopl.o adlib.o
sound-obj-$(CONFIG_GUS) += gus.o gusemu_hal.o gusemu_mixer.o
sound-obj-$(CONFIG_CS4231A) += cs4231a.o
sound-obj-$(CONFIG_HDA) += intel-hda.o hda-audio.o
adlib.o fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0
hw-obj-$(CONFIG_SOUND) += $(sound-obj-y)
hw-obj-$(CONFIG_REALLY_VIRTFS) += virtio-9p-debug.o
hw-obj-$(CONFIG_VIRTFS) += virtio-9p-local.o virtio-9p-xattr.o
hw-obj-$(CONFIG_VIRTFS) += virtio-9p-xattr-user.o virtio-9p-posix-acl.o
######################################################################
# libdis
# NOTE: the disassembler code is only needed for debugging
libdis-y =
libdis-$(CONFIG_ALPHA_DIS) += alpha-dis.o
libdis-$(CONFIG_ARM_DIS) += arm-dis.o
libdis-$(CONFIG_CRIS_DIS) += cris-dis.o
libdis-$(CONFIG_HPPA_DIS) += hppa-dis.o
libdis-$(CONFIG_I386_DIS) += i386-dis.o
libdis-$(CONFIG_IA64_DIS) += ia64-dis.o
libdis-$(CONFIG_M68K_DIS) += m68k-dis.o
libdis-$(CONFIG_MICROBLAZE_DIS) += microblaze-dis.o
libdis-$(CONFIG_MIPS_DIS) += mips-dis.o
libdis-$(CONFIG_PPC_DIS) += ppc-dis.o
libdis-$(CONFIG_S390_DIS) += s390-dis.o
libdis-$(CONFIG_SH4_DIS) += sh4-dis.o
libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o
######################################################################
# trace
ifeq ($(TRACE_BACKEND),dtrace)
trace-obj-y = trace-dtrace.o
else
trace-obj-y = trace.o
ifeq ($(TRACE_BACKEND),simple)
trace-obj-y += simpletrace.o
user-obj-y += qemu-timer-common.o
endif
endif
vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)

View File

@@ -1,22 +1,62 @@
# -*- Mode: makefile -*-
GENERATED_HEADERS = config-target.h
CONFIG_NO_PCI = $(if $(subst n,,$(CONFIG_PCI)),n,y)
CONFIG_NO_KVM = $(if $(subst n,,$(CONFIG_KVM)),n,y)
include ../config-host.mak
include config-devices.mak
include config-target.mak
include config.mak
include $(SRC_PATH)/rules.mak
ifneq ($(HWDIR),)
include $(HWDIR)/config.mak
TARGET_BASE_ARCH:=$(TARGET_ARCH)
ifeq ($(TARGET_ARCH), x86_64)
TARGET_BASE_ARCH:=i386
endif
ifeq ($(TARGET_ARCH), mipsn32)
TARGET_BASE_ARCH:=mips
endif
ifeq ($(TARGET_ARCH), mips64)
TARGET_BASE_ARCH:=mips
endif
ifeq ($(TARGET_ARCH), ppc64)
TARGET_BASE_ARCH:=ppc
endif
ifeq ($(TARGET_ARCH), ppc64h)
TARGET_BASE_ARCH:=ppc
endif
ifeq ($(TARGET_ARCH), ppcemb)
TARGET_BASE_ARCH:=ppc
endif
ifeq ($(TARGET_ARCH), sparc64)
TARGET_BASE_ARCH:=sparc
endif
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
$(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
QEMU_CFLAGS+= -I.. -I$(TARGET_PATH) -DNEED_CPU_H
include $(SRC_PATH)/Makefile.objs
VPATH=$(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw
CPPFLAGS=-I. -I.. -I$(TARGET_PATH) -I$(SRC_PATH) -MMD -MT $@ -MP -DNEED_CPU_H
#CFLAGS+=-Werror
LIBS=
# user emulator name
ifndef TARGET_ARCH2
TARGET_ARCH2=$(TARGET_ARCH)
endif
ifeq ($(TARGET_ARCH),arm)
ifeq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=armeb
endif
endif
ifeq ($(TARGET_ARCH),sh4)
ifeq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=sh4eb
endif
endif
ifeq ($(TARGET_ARCH),mips)
ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=mipsel
endif
endif
ifeq ($(TARGET_ARCH),mipsn32)
ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=mipsn32el
endif
endif
ifeq ($(TARGET_ARCH),mips64)
ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=mips64el
endif
endif
ifdef CONFIG_USER_ONLY
# user emulator name
@@ -31,61 +71,147 @@ endif
endif
PROGS=$(QEMU_PROG)
STPFILES=
ifndef CONFIG_HAIKU
# cc-option
# Usage: CFLAGS+=$(call cc-option, $(CFLAGS), -falign-functions=0, -malign-functions=0)
cc-option = $(shell if $(CC) $(1) $(2) -S -o /dev/null -xc /dev/null \
> /dev/null 2>&1; then echo "$(2)"; else echo "$(3)"; fi ;)
HELPER_CFLAGS=
ifeq ($(ARCH),i386)
HELPER_CFLAGS+=-fomit-frame-pointer
endif
ifeq ($(ARCH),sparc)
CFLAGS+=-ffixed-g2 -ffixed-g3
ifneq ($(CONFIG_SOLARIS),yes)
CFLAGS+=-ffixed-g1 -ffixed-g6
HELPER_CFLAGS+=-ffixed-i0
endif
endif
ifeq ($(ARCH),sparc64)
ifneq ($(CONFIG_SOLARIS),yes)
CFLAGS+=-ffixed-g5 -ffixed-g6 -ffixed-g7
else
CFLAGS+=-ffixed-g1 -ffixed-g4 -ffixed-g5 -ffixed-g7
endif
endif
ifeq ($(ARCH),alpha)
# Ensure there's only a single GP
CFLAGS+=-msmall-data
endif
ifeq ($(ARCH),hppa)
BASE_LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),ia64)
CFLAGS+=-mno-sdata
endif
CFLAGS+=$(OS_CFLAGS) $(ARCH_CFLAGS)
LDFLAGS+=$(OS_LDFLAGS) $(ARCH_LDFLAGS)
CPPFLAGS+=-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
LIBS+=-lm
ifdef CONFIG_WIN32
LIBS+=-lwinmm -lws2_32 -liphlpapi
endif
ifdef CONFIG_SOLARIS
LIBS+=-lsocket -lnsl -lresolv
ifdef NEEDS_LIBSUNMATH
LIBS+=-lsunmath
LDFLAGS+=-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib
CFLAGS+=-I/opt/SUNWspro/prod/include/cc
endif
endif
kvm.o kvm-all.o vhost.o vhost_net.o: QEMU_CFLAGS+=$(KVM_CFLAGS)
kvm.o: CFLAGS+=$(KVM_CFLAGS)
kvm-all.o: CFLAGS+=$(KVM_CFLAGS)
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_SYSTEMTAP_TRACE
stap: $(QEMU_PROG).stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
else
TARGET_TYPE=system
endif
$(QEMU_PROG).stp:
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool \
--$(TRACE_BACKEND) \
--binary $(bindir)/$(QEMU_PROG) \
--target-arch $(TARGET_ARCH) \
--target-type $(TARGET_TYPE) \
--stap < $(SRC_PATH)/trace-events > $(QEMU_PROG).stp," GEN $(QEMU_PROG).stp")
else
stap:
endif
all: $(PROGS) stap
# Dummy command so that make thinks it has done something
@true
all: $(PROGS)
#########################################################
# cpu emulator library
libobj-y = exec.o translate-all.o cpu-exec.o translate.o
libobj-y += tcg/tcg.o
libobj-$(CONFIG_SOFTFLOAT) += fpu/softfloat.o
libobj-$(CONFIG_NOSOFTFLOAT) += fpu/softfloat-native.o
libobj-y += op_helper.o helper.o
ifeq ($(TARGET_BASE_ARCH), i386)
libobj-y += cpuid.o
LIBOBJS=exec.o kqemu.o translate-all.o cpu-exec.o\
translate.o host-utils.o
# TCG code generator
LIBOBJS+= tcg/tcg.o tcg/tcg-runtime.o
CPPFLAGS+=-I$(SRC_PATH)/tcg -I$(SRC_PATH)/tcg/$(ARCH)
ifeq ($(ARCH),sparc64)
CPPFLAGS+=-I$(SRC_PATH)/tcg/sparc
endif
libobj-$(CONFIG_NEED_MMU) += mmu.o
libobj-$(TARGET_ARM) += neon_helper.o iwmmxt_helper.o
ifdef CONFIG_SOFTFLOAT
LIBOBJS+=fpu/softfloat.o
else
LIBOBJS+=fpu/softfloat-native.o
endif
CPPFLAGS+=-I$(SRC_PATH)/fpu
LIBOBJS+= op_helper.o helper.o
libobj-y += disas.o
ifeq ($(TARGET_BASE_ARCH), arm)
LIBOBJS+= neon_helper.o iwmmxt_helper.o
endif
$(libobj-y): $(GENERATED_HEADERS)
ifeq ($(TARGET_BASE_ARCH), alpha)
LIBOBJS+= alpha_palcode.o
endif
ifeq ($(TARGET_BASE_ARCH), cris)
LIBOBJS+= cris-dis.o
ifndef CONFIG_USER_ONLY
LIBOBJS+= mmu.o
endif
endif
# NOTE: the disassembler code is only needed for debugging
LIBOBJS+=disas.o
ifeq ($(findstring i386, $(TARGET_ARCH) $(ARCH)),i386)
USE_I386_DIS=y
endif
ifeq ($(findstring x86_64, $(TARGET_ARCH) $(ARCH)),x86_64)
USE_I386_DIS=y
endif
ifdef USE_I386_DIS
LIBOBJS+=i386-dis.o
endif
ifeq ($(findstring alpha, $(TARGET_ARCH) $(ARCH)),alpha)
LIBOBJS+=alpha-dis.o
endif
ifeq ($(findstring ppc, $(TARGET_BASE_ARCH) $(ARCH)),ppc)
LIBOBJS+=ppc-dis.o
endif
ifeq ($(findstring mips, $(TARGET_BASE_ARCH) $(ARCH)),mips)
LIBOBJS+=mips-dis.o
endif
ifeq ($(findstring sparc, $(TARGET_BASE_ARCH) $(ARCH)),sparc)
LIBOBJS+=sparc-dis.o
endif
ifeq ($(findstring arm, $(TARGET_ARCH) $(ARCH)),arm)
LIBOBJS+=arm-dis.o
endif
ifeq ($(findstring m68k, $(TARGET_ARCH) $(ARCH)),m68k)
LIBOBJS+=m68k-dis.o
endif
ifeq ($(findstring sh4, $(TARGET_ARCH) $(ARCH)),sh4)
LIBOBJS+=sh4-dis.o
endif
ifeq ($(findstring hppa, $(TARGET_BASE_ARCH) $(ARCH)),hppa)
LIBOBJS+=hppa-dis.o
endif
ifeq ($(findstring s390, $(TARGET_ARCH) $(ARCH)),s390)
LIBOBJS+=s390-dis.o
endif
# libqemu
libqemu.a: $(LIBOBJS)
translate.o: translate.c cpu.h
translate-all.o: translate-all.c cpu.h
@@ -94,42 +220,145 @@ tcg/tcg.o: cpu.h
# HELPER_CFLAGS is used for all the code compiled with static register
# variables
op_helper.o cpu-exec.o: QEMU_CFLAGS += $(HELPER_CFLAGS)
op_helper.o: CFLAGS += $(HELPER_CFLAGS) $(I386_CFLAGS)
# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in cpu-exec.c.
signal.o: QEMU_CFLAGS += $(HELPER_CFLAGS)
cpu-exec.o: CFLAGS += $(HELPER_CFLAGS)
#########################################################
# Linux user emulator target
ifdef CONFIG_LINUX_USER
$(call set-vpath, $(SRC_PATH)/linux-user:$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR))
ifndef TARGET_ABI_DIR
TARGET_ABI_DIR=$(TARGET_ARCH)
endif
VPATH+=:$(SRC_PATH)/linux-user:$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
CPPFLAGS+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
obj-y = main.o syscall.o strace.o mmap.o signal.o thunk.o \
elfload.o linuxload.o uaccess.o gdbstub.o cpu-uname.o \
qemu-malloc.o $(oslib-obj-y)
ifdef CONFIG_STATIC
LDFLAGS+=-static
endif
obj-$(TARGET_HAS_BFLT) += flatload.o
ifeq ($(ARCH),i386)
ifdef TARGET_GPROF
USE_I386_LD=y
endif
ifdef CONFIG_STATIC
USE_I386_LD=y
endif
ifdef USE_I386_LD
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
# WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
# that the kernel ELF loader considers as an executable. I think this
# is the simplest way to make it self virtualizable!
LDFLAGS+=-Wl,-shared
endif
endif
obj-$(TARGET_I386) += vm86.o
ifeq ($(ARCH),x86_64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
obj-i386-y += ioport-user.o
ifeq ($(ARCH),ppc)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
nwfpe-obj-y = fpa11.o fpa11_cpdo.o fpa11_cpdt.o fpa11_cprt.o fpopcode.o
nwfpe-obj-y += single_cpdo.o double_cpdo.o extended_cpdo.o
obj-arm-y += $(addprefix nwfpe/, $(nwfpe-obj-y))
obj-arm-y += arm-semi.o
ifeq ($(ARCH),ppc64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
obj-m68k-y += m68k-sim.o m68k-semi.o
ifeq ($(ARCH),s390)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
ifeq ($(ARCH),sparc)
# -static is used to avoid g1/g3 usage by the dynamic linker
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld -static
endif
obj-y += $(addprefix ../libuser/, $(user-obj-y))
obj-y += $(addprefix ../libdis-user/, $(libdis-y))
obj-y += $(libobj-y)
ifeq ($(ARCH),sparc64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),alpha)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),ia64)
LDFLAGS+=-Wl,-G0 -Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),arm)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),m68k)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),mips)
ifeq ($(WORDS_BIGENDIAN),yes)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH)el.ld
endif
endif
ifeq ($(ARCH),mips64)
ifeq ($(WORDS_BIGENDIAN),yes)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH)el.ld
endif
endif
# profiling code
ifdef TARGET_GPROF
LDFLAGS+=-p
CFLAGS+=-p
endif
OBJS= main.o syscall.o strace.o mmap.o signal.o path.o thunk.o \
elfload.o linuxload.o uaccess.o envlist.o
LIBS+= $(AIOLIBS)
ifdef TARGET_HAS_BFLT
OBJS+= flatload.o
endif
ifdef TARGET_HAS_ELFLOAD32
OBJS+= elfload32.o
elfload32.o: elfload.c
endif
ifeq ($(TARGET_ARCH), i386)
OBJS+= vm86.o
endif
ifeq ($(TARGET_ARCH), arm)
OBJS+=nwfpe/fpa11.o nwfpe/fpa11_cpdo.o \
nwfpe/fpa11_cpdt.o nwfpe/fpa11_cprt.o nwfpe/fpopcode.o nwfpe/single_cpdo.o \
nwfpe/double_cpdo.o nwfpe/extended_cpdo.o arm-semi.o
endif
ifeq ($(TARGET_ARCH), m68k)
OBJS+= m68k-sim.o m68k-semi.o
endif
ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o gdbstub-xml.o
endif
OBJS+= libqemu.a
# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in cpu-exec.c.
signal.o: CFLAGS += $(HELPER_CFLAGS)
$(QEMU_PROG): $(OBJS) ../libqemu_user.a
$(LINK)
ifeq ($(ARCH),alpha)
# Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
# the address space (31 bit so sign extending doesn't matter)
echo -ne '\001\000\000\000' | dd of=qemu bs=1 seek=48 count=4 conv=notrunc
endif
endif #CONFIG_LINUX_USER
@@ -138,25 +367,28 @@ endif #CONFIG_LINUX_USER
ifdef CONFIG_DARWIN_USER
$(call set-vpath, $(SRC_PATH)/darwin-user)
QEMU_CFLAGS+=-I$(SRC_PATH)/darwin-user -I$(SRC_PATH)/darwin-user/$(TARGET_ARCH)
VPATH+=:$(SRC_PATH)/darwin-user
CPPFLAGS+=-I$(SRC_PATH)/darwin-user -I$(SRC_PATH)/darwin-user/$(TARGET_ARCH)
# Leave some space for the regular program loading zone
LDFLAGS+=-Wl,-segaddr,__STD_PROG_ZONE,0x1000 -image_base 0x0e000000
LIBS+=-lmx
obj-y = main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o \
gdbstub.o
OBJS= main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o
obj-i386-y += ioport-user.o
OBJS+= libqemu.a
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o gdbstub-xml.o
endif
obj-y += $(addprefix ../libuser/, $(user-obj-y))
obj-y += $(addprefix ../libdis-user/, $(libdis-y))
obj-y += $(libobj-y)
# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in cpu-exec.c.
signal.o: CFLAGS += $(HELPER_CFLAGS)
$(QEMU_PROG): $(OBJS)
$(LINK)
endif #CONFIG_DARWIN_USER
@@ -165,215 +397,355 @@ endif #CONFIG_DARWIN_USER
ifdef CONFIG_BSD_USER
$(call set-vpath, $(SRC_PATH)/bsd-user)
VPATH+=:$(SRC_PATH)/bsd-user
CPPFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)
QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)
ifdef CONFIG_STATIC
LDFLAGS+=-static
endif
obj-y = main.o bsdload.o elfload.o mmap.o signal.o strace.o syscall.o \
gdbstub.o uaccess.o
ifeq ($(ARCH),i386)
ifdef TARGET_GPROF
USE_I386_LD=y
endif
ifdef CONFIG_STATIC
USE_I386_LD=y
endif
ifdef USE_I386_LD
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
# WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
# that the kernel ELF loader considers as an executable. I think this
# is the simplest way to make it self virtualizable!
LDFLAGS+=-Wl,-shared
endif
endif
obj-i386-y += ioport-user.o
ifeq ($(ARCH),x86_64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
ifeq ($(ARCH),ppc)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
obj-y += $(addprefix ../libuser/, $(user-obj-y))
obj-y += $(addprefix ../libdis-user/, $(libdis-y))
obj-y += $(libobj-y)
ifeq ($(ARCH),ppc64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),s390)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),sparc)
# -static is used to avoid g1/g3 usage by the dynamic linker
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld -static
endif
ifeq ($(ARCH),sparc64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),alpha)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),ia64)
LDFLAGS+=-Wl,-G0 -Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),arm)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),m68k)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),mips)
ifeq ($(WORDS_BIGENDIAN),yes)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH)el.ld
endif
endif
ifeq ($(ARCH),mips64)
ifeq ($(WORDS_BIGENDIAN),yes)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH)el.ld
endif
endif
OBJS= main.o bsdload.o elfload.o mmap.o path.o signal.o strace.o syscall.o
OBJS+= uaccess.o
OBJS+= libqemu.a
ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o
endif
# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in cpu-exec.c.
signal.o: CFLAGS += $(HELPER_CFLAGS)
$(QEMU_PROG): $(OBJS) ../libqemu_user.a
$(LINK)
endif #CONFIG_BSD_USER
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
ifndef CONFIG_USER_ONLY
obj-y = arch_init.o cpus.o monitor.o machine.o gdbstub.o balloon.o
OBJS=vl.o osdep.o monitor.o pci.o loader.o isa_mmio.o machine.o dma-helpers.o
# virtio has to be here due to weird dependency between PCI and virtio-net.
# need to fix this properly
obj-$(CONFIG_NO_PCI) += pci-stub.o
obj-$(CONFIG_VIRTIO) += virtio-blk.o virtio-balloon.o virtio-net.o virtio-serial-bus.o
obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
obj-y += vhost_net.o
obj-$(CONFIG_VHOST_NET) += vhost.o
obj-$(CONFIG_REALLY_VIRTFS) += virtio-9p.o
obj-y += rwhandler.o
obj-$(CONFIG_KVM) += kvm.o kvm-all.o
obj-$(CONFIG_NO_KVM) += kvm-stub.o
LIBS+=-lz
QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
QEMU_CFLAGS += $(VNC_SASL_CFLAGS)
QEMU_CFLAGS += $(VNC_JPEG_CFLAGS)
QEMU_CFLAGS += $(VNC_PNG_CFLAGS)
# xen backend driver support
obj-$(CONFIG_XEN) += xen_machine_pv.o xen_domainbuild.o
# Inter-VM PCI shared memory
obj-$(CONFIG_KVM) += ivshmem.o
# Hardware support
obj-i386-y += vga.o
obj-i386-y += mc146818rtc.o i8259.o pc.o
obj-i386-y += cirrus_vga.o apic.o ioapic.o piix_pci.o
obj-i386-y += vmmouse.o vmport.o hpet.o applesmc.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
obj-i386-y += pc_piix.o
obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
# shared objects
obj-ppc-y = ppc.o
obj-ppc-y += vga.o
# PREP target
obj-ppc-y += i8259.o mc146818rtc.o
obj-ppc-y += ppc_prep.o
# OldWorld PowerMac
obj-ppc-y += ppc_oldworld.o
# NewWorld PowerMac
obj-ppc-y += ppc_newworld.o
# PowerPC 4xx boards
obj-ppc-y += ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
obj-ppc-y += ppc440.o ppc440_bamboo.o
# PowerPC E500 boards
obj-ppc-y += ppce500_mpc8544ds.o
# PowerPC 440 Xilinx ML507 reference board.
obj-ppc-y += virtex_ml507.o
obj-ppc-$(CONFIG_KVM) += kvm_ppc.o
obj-ppc-$(CONFIG_FDT) += device_tree.o
# Xilinx PPC peripherals
obj-ppc-y += xilinx_intc.o
obj-ppc-y += xilinx_timer.o
obj-ppc-y += xilinx_uartlite.o
obj-ppc-y += xilinx_ethlite.o
obj-mips-y = mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
obj-mips-y += mips_addr.o mips_timer.o mips_int.o
obj-mips-y += vga.o i8259.o
obj-mips-y += g364fb.o jazz_led.o
obj-mips-y += gt64xxx.o mc146818rtc.o
obj-mips-y += cirrus_vga.o
obj-mips-$(CONFIG_FULONG) += bonito.o vt82c686.o mips_fulong2e.o
obj-microblaze-y = petalogix_s3adsp1800_mmu.o
obj-microblaze-y += microblaze_pic_cpu.o
obj-microblaze-y += xilinx_intc.o
obj-microblaze-y += xilinx_timer.o
obj-microblaze-y += xilinx_uartlite.o
obj-microblaze-y += xilinx_ethlite.o
obj-microblaze-$(CONFIG_FDT) += device_tree.o
# Boards
obj-cris-y = cris_pic_cpu.o
obj-cris-y += cris-boot.o
obj-cris-y += etraxfs.o axis_dev88.o
obj-cris-y += axis_dev88.o
# IO blocks
obj-cris-y += etraxfs_dma.o
obj-cris-y += etraxfs_pic.o
obj-cris-y += etraxfs_eth.o
obj-cris-y += etraxfs_timer.o
obj-cris-y += etraxfs_ser.o
ifeq ($(TARGET_ARCH), sparc64)
obj-sparc-y = sun4u.o apb_pci.o
obj-sparc-y += vga.o
obj-sparc-y += mc146818rtc.o
obj-sparc-y += cirrus_vga.o
OBJS+=virtio.o virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o
OBJS+=fw_cfg.o
ifdef CONFIG_KVM
OBJS+=kvm.o kvm-all.o
endif
ifdef CONFIG_WIN32
OBJS+=block-raw-win32.o
else
obj-sparc-y = sun4m.o lance.o tcx.o sun4m_iommu.o slavio_intctl.o
obj-sparc-y += slavio_timer.o slavio_misc.o sparc32_dma.o
obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o leon3.o
# GRLIB
obj-sparc-y += grlib_gptimer.o grlib_irqmp.o grlib_apbuart.o
ifdef CONFIG_AIO
OBJS+=posix-aio-compat.o
endif
OBJS+=block-raw-posix.o
endif
obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
obj-arm-y += pl061.o
obj-arm-y += arm-semi.o
obj-arm-y += pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
obj-arm-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
obj-arm-y += gumstix.o
obj-arm-y += zaurus.o ide/microdrive.o spitz.o tosa.o tc6393xb.o
obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o \
omap_gpio.o omap_intc.o omap_uart.o
obj-arm-y += omap2.o omap_dss.o soc_dma.o omap_gptimer.o omap_synctimer.o \
omap_gpmc.o omap_sdrc.o omap_spi.o omap_tap.o omap_l4.o
obj-arm-y += omap_sx1.o palm.o tsc210x.o
obj-arm-y += nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
obj-arm-y += mst_fpga.o mainstone.o
obj-arm-y += musicpal.o bitbang_i2c.o marvell_88w8618_audio.o
obj-arm-y += framebuffer.o
obj-arm-y += syborg.o syborg_fb.o syborg_interrupt.o syborg_keyboard.o
obj-arm-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o
obj-arm-y += syborg_virtio.o
LIBS+=-lz
ifdef CONFIG_ALSA
LIBS += -lasound
endif
ifdef CONFIG_ESD
LIBS += -lesd
endif
ifdef CONFIG_PA
LIBS += -lpulse-simple
endif
ifdef CONFIG_DSOUND
LIBS += -lole32 -ldxguid
endif
ifdef CONFIG_FMOD
LIBS += $(CONFIG_FMOD_LIB)
endif
ifdef CONFIG_OSS
LIBS += $(CONFIG_OSS_LIB)
endif
obj-sh4-y = shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
obj-sh4-y += sh_timer.o sh_serial.o sh_intc.o sh_pci.o sm501.o
obj-sh4-y += ide/mmio.o
SOUND_HW = sb16.o es1370.o ac97.o
ifdef CONFIG_ADLIB
SOUND_HW += fmopl.o adlib.o
adlib.o fmopl.o: CFLAGS := ${CFLAGS} -DBUILD_Y8950=0
endif
ifdef CONFIG_GUS
SOUND_HW += gus.o gusemu_hal.o gusemu_mixer.o
endif
ifdef CONFIG_CS4231A
SOUND_HW += cs4231a.o
endif
obj-m68k-y = an5206.o mcf5206.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
obj-m68k-y += m68k-semi.o dummy_m68k.o
ifdef CONFIG_VNC_TLS
CPPFLAGS += $(CONFIG_VNC_TLS_CFLAGS)
LIBS += $(CONFIG_VNC_TLS_LIBS)
endif
obj-s390x-y = s390-virtio-bus.o s390-virtio.o
ifdef CONFIG_BLUEZ
LIBS += $(CONFIG_BLUEZ_LIBS)
endif
obj-alpha-y = alpha_palcode.o
# SCSI layer
OBJS+= lsi53c895a.o esp.o
main.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
# USB layer
OBJS+= usb-ohci.o
monitor.o: hmp-commands.h qmp-commands.h
# EEPROM emulation
OBJS += eeprom93xx.o
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
# PCI network cards
OBJS += eepro100.o
OBJS += ne2000.o
OBJS += pcnet.o
OBJS += rtl8139.o
OBJS += e1000.o
obj-y += $(addprefix ../, $(common-obj-y))
obj-y += $(addprefix ../libdis/, $(libdis-y))
obj-y += $(libobj-y)
obj-y += $(addprefix $(HWDIR)/, $(hw-obj-y))
# Serial mouse
OBJS += msmouse.o
endif # CONFIG_SOFTMMU
ifeq ($(TARGET_BASE_ARCH), i386)
# Hardware support
OBJS+= ide.o pckbd.o ps2.o vga.o $(SOUND_HW) dma.o
OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
OBJS+= cirrus_vga.o apic.o parallel.o acpi.o piix_pci.o
OBJS+= usb-uhci.o vmmouse.o vmport.o vmware_vga.o hpet.o
OBJS += device-hotplug.o pci-hotplug.o
CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
endif
ifeq ($(TARGET_BASE_ARCH), ppc)
CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
# shared objects
OBJS+= ppc.o ide.o vga.o $(SOUND_HW) dma.o openpic.o
# PREP target
OBJS+= pckbd.o ps2.o serial.o i8259.o i8254.o fdc.o m48t59.o mc146818rtc.o
OBJS+= prep_pci.o ppc_prep.o
# Mac shared devices
OBJS+= macio.o cuda.o adb.o mac_nvram.o mac_dbdma.o escc.o
# OldWorld PowerMac
OBJS+= heathrow_pic.o grackle_pci.o ppc_oldworld.o
# NewWorld PowerMac
OBJS+= unin_pci.o ppc_newworld.o
# PowerPC 4xx boards
OBJS+= pflash_cfi02.o ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
OBJS+= ppc440.o ppc440_bamboo.o
# PowerPC E500 boards
OBJS+= ppce500_pci.o ppce500_mpc8544ds.o
ifdef FDT_LIBS
OBJS+= device_tree.o
LIBS+= $(FDT_LIBS)
endif
ifdef CONFIG_KVM
OBJS+= kvm_ppc.o
endif
endif
ifeq ($(TARGET_BASE_ARCH), mips)
OBJS+= mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
OBJS+= mips_timer.o mips_int.o dma.o vga.o serial.o i8254.o i8259.o rc4030.o
OBJS+= g364fb.o jazz_led.o
OBJS+= ide.o gt64xxx.o pckbd.o ps2.o fdc.o mc146818rtc.o usb-uhci.o acpi.o ds1225y.o
OBJS+= piix_pci.o parallel.o cirrus_vga.o pcspk.o $(SOUND_HW)
OBJS+= mipsnet.o
OBJS+= pflash_cfi01.o
OBJS+= vmware_vga.o
CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
endif
ifeq ($(TARGET_BASE_ARCH), cris)
# Boards
OBJS+= etraxfs.o axis_dev88.o
obj-y += $(addprefix ../, $(trace-obj-y))
obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o
# IO blocks
OBJS+= etraxfs_dma.o
OBJS+= etraxfs_pic.o
OBJS+= etraxfs_eth.o
OBJS+= etraxfs_timer.o
OBJS+= etraxfs_ser.o
$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)
$(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y))
OBJS+= ptimer.o
OBJS+= pflash_cfi02.o nand.o
endif
ifeq ($(TARGET_BASE_ARCH), sparc)
ifeq ($(TARGET_ARCH), sparc64)
OBJS+= sun4u.o ide.o pckbd.o ps2.o vga.o apb_pci.o
OBJS+= fdc.o mc146818rtc.o serial.o m48t59.o
OBJS+= cirrus_vga.o parallel.o ptimer.o
else
OBJS+= sun4m.o tcx.o pcnet.o iommu.o m48t59.o slavio_intctl.o
OBJS+= slavio_timer.o escc.o slavio_misc.o fdc.o sparc32_dma.o
OBJS+= cs4231.o ptimer.o eccmemctl.o sbi.o sun4c_intctl.o
endif
endif
ifeq ($(TARGET_BASE_ARCH), arm)
OBJS+= integratorcp.o versatilepb.o ps2.o smc91c111.o arm_pic.o arm_timer.o
OBJS+= arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
OBJS+= versatile_pci.o ptimer.o
OBJS+= realview_gic.o realview.o arm_sysctl.o mpcore.o
OBJS+= armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
OBJS+= pl061.o
OBJS+= arm-semi.o
OBJS+= pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
OBJS+= pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
OBJS+= pflash_cfi01.o gumstix.o
OBJS+= zaurus.o ide.o serial.o nand.o ecc.o spitz.o tosa.o tc6393xb.o
OBJS+= omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o
OBJS+= omap2.o omap_dss.o soc_dma.o
OBJS+= omap_sx1.o palm.o tsc210x.o
OBJS+= nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
OBJS+= tsc2005.o bt-hci-csr.o
OBJS+= mst_fpga.o mainstone.o
OBJS+= musicpal.o pflash_cfi02.o
CPPFLAGS += -DHAS_AUDIO
endif
ifeq ($(TARGET_BASE_ARCH), sh4)
OBJS+= shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
OBJS+= sh_timer.o ptimer.o sh_serial.o sh_intc.o sh_pci.o sm501.o serial.o
OBJS+= ide.o
endif
ifeq ($(TARGET_BASE_ARCH), m68k)
OBJS+= an5206.o mcf5206.o ptimer.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
OBJS+= m68k-semi.o dummy_m68k.o
endif
ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o gdbstub-xml.o
endif
ifdef CONFIG_COCOA
COCOA_LIBS=-F/System/Library/Frameworks -framework Cocoa -framework IOKit
ifdef CONFIG_COREAUDIO
COCOA_LIBS+=-framework CoreAudio
endif
endif
ifdef CONFIG_SLIRP
CPPFLAGS+=-I$(SRC_PATH)/slirp
endif
LIBS+=$(AIOLIBS)
# specific flags are needed for non soft mmu emulator
ifdef CONFIG_STATIC
LDFLAGS+=-static
endif
ifndef CONFIG_DARWIN
ifndef CONFIG_WIN32
ifndef CONFIG_SOLARIS
ifndef CONFIG_AIX
LIBS+=-lutil
endif
endif
endif
endif
ifdef TARGET_GPROF
vl.o: CFLAGS+=-p
LDFLAGS+=-p
endif
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES)," GEN $(TARGET_DIR)$@")
ifeq ($(ARCH),ia64)
LDFLAGS+=-Wl,-G0 -Wl,-T,$(SRC_PATH)/ia64.ld
endif
hmp-commands.h: $(SRC_PATH)/hmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
ifdef CONFIG_WIN32
SDL_LIBS := $(filter-out -mwindows, $(SDL_LIBS)) -mconsole
endif
qmp-commands.h: $(SRC_PATH)/qmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
# profiling code
ifdef TARGET_GPROF
LDFLAGS+=-p
main.o: CFLAGS+=-p
endif
$(QEMU_PROG): LIBS += $(SDL_LIBS) $(COCOA_LIBS) $(CURSES_LIBS) $(BRLAPI_LIBS) $(VDE_LIBS)
$(QEMU_PROG): $(OBJS) ../libqemu_common.a libqemu.a
$(LINK)
endif # !CONFIG_USER_ONLY
gdbstub-xml.c: $(TARGET_XML_FILES) feature_to_c.sh
rm -f $@
ifeq ($(TARGET_XML_FILES),)
echo > $@
else
$(SHELL) $(SRC_PATH)/feature_to_c.sh $@ $(TARGET_XML_FILES)
endif
clean:
rm -f *.o *.a *~ $(PROGS) nwfpe/*.o fpu/*.o
rm -f *.d */*.d tcg/*.o ide/*.o
rm -f hmp-commands.h qmp-commands.h gdbstub-xml.c
ifdef CONFIG_SYSTEMTAP_TRACE
rm -f *.stp
endif
rm -f *.d */*.d tcg/*.o
install: all
ifneq ($(PROGS),)
$(INSTALL) -m 755 $(PROGS) "$(DESTDIR)$(bindir)"
ifneq ($(STRIP),)
$(STRIP) $(patsubst %,"$(DESTDIR)$(bindir)/%",$(PROGS))
endif
endif
ifdef CONFIG_SYSTEMTAP_TRACE
$(INSTALL_DIR) "$(DESTDIR)$(datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp "$(DESTDIR)$(datadir)/../systemtap/tapset"
$(INSTALL) -m 755 -s $(PROGS) "$(DESTDIR)$(bindir)"
endif
# Include automatically generated dependency files

View File

@@ -1,23 +0,0 @@
# Makefile for qemu target independent user files.
include ../config-host.mak
include $(SRC_PATH)/rules.mak
-include config.mak
.PHONY: all
$(call set-vpath, $(SRC_PATH))
QEMU_CFLAGS+=-I..
include $(SRC_PATH)/Makefile.objs
all: $(user-obj-y)
# Dummy command so that make thinks it has done something
@true
clean:
rm -f *.o *.d *.a *~
# Include automatically generated dependency files
-include $(wildcard *.d */*.d)

View File

@@ -1,88 +0,0 @@
QEMU Monitor Protocol
=====================
Introduction
-------------
The QEMU Monitor Protocol (QMP) allows applications to communicate with
QEMU's Monitor.
QMP is JSON[1] based and currently has the following features:
- Lightweight, text-based, easy to parse data format
- Asynchronous messages support (ie. events)
- Capabilities Negotiation
For detailed information on QMP's usage, please, refer to the following files:
o qmp-spec.txt QEMU Monitor Protocol current specification
o qmp-commands.txt QMP supported commands (auto-generated at build-time)
o qmp-events.txt List of available asynchronous events
There is also a simple Python script called 'qmp-shell' available.
IMPORTANT: It's strongly recommended to read the 'Stability Considerations'
section in the qmp-commands.txt file before making any serious use of QMP.
[1] http://www.json.org
Usage
-----
To enable QMP, you need a QEMU monitor instance in "control mode". There are
two ways of doing this.
The simplest one is using the '-qmp' command-line option. The following
example makes QMP available on localhost port 4444:
$ qemu [...] -qmp tcp:localhost:4444,server
However, in order to have more complex combinations, like multiple monitors,
the '-mon' command-line option should be used along with the '-chardev' one.
For instance, the following example creates one user monitor on stdio and one
QMP monitor on localhost port 4444.
$ qemu [...] -chardev stdio,id=mon0 -mon chardev=mon0,mode=readline \
-chardev socket,id=mon1,host=localhost,port=4444,server \
-mon chardev=mon1,mode=control
Please, refer to QEMU's manpage for more information.
Simple Testing
--------------
To manually test QMP one can connect with telnet and issue commands by hand:
$ telnet localhost 4444
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 13, "major": 0}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "query-version" }
{"return": {"qemu": {"micro": 50, "minor": 13, "major": 0}, "package": ""}}
Development Process
-------------------
When changing QMP's interface (by adding new commands, events or modifying
existing ones) it's mandatory to update the relevant documentation, which is
one (or more) of the files listed in the 'Introduction' section*.
Also, it's strongly recommended to send the documentation patch first, before
doing any code change. This is so because:
1. Avoids the code dictating the interface
2. Review can improve your interface. Letting that happen before
you implement it can save you work.
* The qmp-commands.txt file is generated from the qmp-commands.hx one, which
is the file that should be edited.
Homepage
--------
http://wiki.qemu.org/QMP

View File

@@ -1,266 +0,0 @@
QEMU Monitor Protocol Events
============================
BLOCK_IO_ERROR
--------------
Emitted when a disk I/O error occurs.
Data:
- "device": device name (json-string)
- "operation": I/O operation (json-string, "read" or "write")
- "action": action that has been taken, it's one of the following (json-string):
"ignore": error has been ignored
"report": error has been reported to the device
"stop": error caused VM to be stopped
Example:
{ "event": "BLOCK_IO_ERROR",
"data": { "device": "ide0-hd1",
"operation": "write",
"action": "stop" },
"timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
Note: If action is "stop", a STOP event will eventually follow the
BLOCK_IO_ERROR event.
RESET
-----
Emitted when the Virtual Machine is reseted.
Data: None.
Example:
{ "event": "RESET",
"timestamp": { "seconds": 1267041653, "microseconds": 9518 } }
RESUME
------
Emitted when the Virtual Machine resumes execution.
Data: None.
Example:
{ "event": "RESUME",
"timestamp": { "seconds": 1271770767, "microseconds": 582542 } }
RTC_CHANGE
----------
Emitted when the guest changes the RTC time.
Data:
- "offset": delta against the host UTC in seconds (json-number)
Example:
{ "event": "RTC_CHANGE",
"data": { "offset": 78 },
"timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
SHUTDOWN
--------
Emitted when the Virtual Machine is powered down.
Data: None.
Example:
{ "event": "SHUTDOWN",
"timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
Note: If the command-line option "-no-shutdown" has been specified, a STOP
event will eventually follow the SHUTDOWN event.
STOP
----
Emitted when the Virtual Machine is stopped.
Data: None.
Example:
{ "event": "STOP",
"timestamp": { "seconds": 1267041730, "microseconds": 281295 } }
VNC_CONNECTED
-------------
Emitted when a VNC client establishes a connection.
Data:
- "server": Server information (json-object)
- "host": IP address (json-string)
- "service": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
- "auth": authentication method (json-string, optional)
- "client": Client information (json-object)
- "host": IP address (json-string)
- "service": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
Example:
{ "event": "VNC_CONNECTED",
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0" },
"client": { "family": "ipv4", "service": "58425",
"host": "127.0.0.1" } },
"timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
Note: This event is emitted before any authentication takes place, thus
the authentication ID is not provided.
VNC_DISCONNECTED
----------------
Emitted when the conection is closed.
Data:
- "server": Server information (json-object)
- "host": IP address (json-string)
- "service": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
- "auth": authentication method (json-string, optional)
- "client": Client information (json-object)
- "host": IP address (json-string)
- "service": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
- "x509_dname": TLS dname (json-string, optional)
- "sasl_username": SASL username (json-string, optional)
Example:
{ "event": "VNC_DISCONNECTED",
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0" },
"client": { "family": "ipv4", "service": "58425",
"host": "127.0.0.1", "sasl_username": "luiz" } },
"timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
VNC_INITIALIZED
---------------
Emitted after authentication takes place (if any) and the VNC session is
made active.
Data:
- "server": Server information (json-object)
- "host": IP address (json-string)
- "service": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
- "auth": authentication method (json-string, optional)
- "client": Client information (json-object)
- "host": IP address (json-string)
- "service": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
- "x509_dname": TLS dname (json-string, optional)
- "sasl_username": SASL username (json-string, optional)
Example:
{ "event": "VNC_INITIALIZED",
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0"},
"client": { "family": "ipv4", "service": "46089",
"host": "127.0.0.1", "sasl_username": "luiz" } },
"timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
SPICE_CONNECTED, SPICE_DISCONNECTED
-----------------------------------
Emitted when a SPICE client connects or disconnects.
Data:
- "server": Server information (json-object)
- "host": IP address (json-string)
- "port": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
- "client": Client information (json-object)
- "host": IP address (json-string)
- "port": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
Example:
{ "timestamp": {"seconds": 1290688046, "microseconds": 388707},
"event": "SPICE_CONNECTED",
"data": {
"server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
"client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
}}
SPICE_INITIALIZED
-----------------
Emitted after initial handshake and authentication takes place (if any)
and the SPICE channel is up'n'running
Data:
- "server": Server information (json-object)
- "host": IP address (json-string)
- "port": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
- "auth": authentication method (json-string, optional)
- "client": Client information (json-object)
- "host": IP address (json-string)
- "port": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
- "connection-id": spice connection id. All channels with the same id
belong to the same spice session (json-int)
- "channel-type": channel type. "1" is the main control channel, filter for
this one if you want track spice sessions only (json-int)
- "channel-id": channel id. Usually "0", might be different needed when
multiple channels of the same type exist, such as multiple
display channels in a multihead setup (json-int)
- "tls": whevener the channel is encrypted (json-bool)
Example:
{ "timestamp": {"seconds": 1290688046, "microseconds": 417172},
"event": "SPICE_INITIALIZED",
"data": {"server": {"auth": "spice", "port": "5921",
"family": "ipv4", "host": "127.0.0.1"},
"client": {"port": "49004", "family": "ipv4", "channel-type": 3,
"connection-id": 1804289383, "host": "127.0.0.1",
"channel-id": 0, "tls": true}
}}
WATCHDOG
--------
Emitted when the watchdog device's timer is expired.
Data:
- "action": Action that has been taken, it's one of the following (json-string):
"reset", "shutdown", "poweroff", "pause", "debug", or "none"
Example:
{ "event": "WATCHDOG",
"data": { "action": "reset" },
"timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is
followed respectively by the RESET, SHUTDOWN, or STOP events.

View File

@@ -1,259 +0,0 @@
#!/usr/bin/python
#
# Low-level QEMU shell on top of QMP.
#
# Copyright (C) 2009, 2010 Red Hat Inc.
#
# Authors:
# Luiz Capitulino <lcapitulino@redhat.com>
#
# This work is licensed under the terms of the GNU GPL, version 2. See
# the COPYING file in the top-level directory.
#
# Usage:
#
# Start QEMU with:
#
# # qemu [...] -qmp unix:./qmp-sock,server
#
# Run the shell:
#
# $ qmp-shell ./qmp-sock
#
# Commands have the following format:
#
# < command-name > [ arg-name1=arg1 ] ... [ arg-nameN=argN ]
#
# For example:
#
# (QEMU) device_add driver=e1000 id=net1
# {u'return': {}}
# (QEMU)
import qmp
import readline
import sys
class QMPCompleter(list):
def complete(self, text, state):
for cmd in self:
if cmd.startswith(text):
if not state:
return cmd
else:
state -= 1
class QMPShellError(Exception):
pass
class QMPShellBadPort(QMPShellError):
pass
# TODO: QMPShell's interface is a bit ugly (eg. _fill_completion() and
# _execute_cmd()). Let's design a better one.
class QMPShell(qmp.QEMUMonitorProtocol):
def __init__(self, address):
qmp.QEMUMonitorProtocol.__init__(self, self.__get_address(address))
self._greeting = None
self._completer = None
def __get_address(self, arg):
"""
Figure out if the argument is in the port:host form, if it's not it's
probably a file path.
"""
addr = arg.split(':')
if len(addr) == 2:
try:
port = int(addr[1])
except ValueError:
raise QMPShellBadPort
return ( addr[0], port )
# socket path
return arg
def _fill_completion(self):
for cmd in self.cmd('query-commands')['return']:
self._completer.append(cmd['name'])
def __completer_setup(self):
self._completer = QMPCompleter()
self._fill_completion()
readline.set_completer(self._completer.complete)
readline.parse_and_bind("tab: complete")
# XXX: default delimiters conflict with some command names (eg. query-),
# clearing everything as it doesn't seem to matter
readline.set_completer_delims('')
def __build_cmd(self, cmdline):
"""
Build a QMP input object from a user provided command-line in the
following format:
< command-name > [ arg-name1=arg1 ] ... [ arg-nameN=argN ]
"""
cmdargs = cmdline.split()
qmpcmd = { 'execute': cmdargs[0], 'arguments': {} }
for arg in cmdargs[1:]:
opt = arg.split('=')
try:
value = int(opt[1])
except ValueError:
value = opt[1]
qmpcmd['arguments'][opt[0]] = value
return qmpcmd
def _execute_cmd(self, cmdline):
try:
qmpcmd = self.__build_cmd(cmdline)
except:
print 'command format: <command-name> ',
print '[arg-name1=arg1] ... [arg-nameN=argN]'
return True
resp = self.cmd_obj(qmpcmd)
if resp is None:
print 'Disconnected'
return False
print resp
return True
def connect(self):
self._greeting = qmp.QEMUMonitorProtocol.connect(self)
self.__completer_setup()
def show_banner(self, msg='Welcome to the QMP low-level shell!'):
print msg
version = self._greeting['QMP']['version']['qemu']
print 'Connected to QEMU %d.%d.%d\n' % (version['major'],version['minor'],version['micro'])
def read_exec_command(self, prompt):
"""
Read and execute a command.
@return True if execution was ok, return False if disconnected.
"""
try:
cmdline = raw_input(prompt)
except EOFError:
print
return False
if cmdline == '':
for ev in self.get_events():
print ev
self.clear_events()
return True
else:
return self._execute_cmd(cmdline)
class HMPShell(QMPShell):
def __init__(self, address):
QMPShell.__init__(self, address)
self.__cpu_index = 0
def __cmd_completion(self):
for cmd in self.__cmd_passthrough('help')['return'].split('\r\n'):
if cmd and cmd[0] != '[' and cmd[0] != '\t':
name = cmd.split()[0] # drop help text
if name == 'info':
continue
if name.find('|') != -1:
# Command in the form 'foobar|f' or 'f|foobar', take the
# full name
opt = name.split('|')
if len(opt[0]) == 1:
name = opt[1]
else:
name = opt[0]
self._completer.append(name)
self._completer.append('help ' + name) # help completion
def __info_completion(self):
for cmd in self.__cmd_passthrough('info')['return'].split('\r\n'):
if cmd:
self._completer.append('info ' + cmd.split()[1])
def __other_completion(self):
# special cases
self._completer.append('help info')
def _fill_completion(self):
self.__cmd_completion()
self.__info_completion()
self.__other_completion()
def __cmd_passthrough(self, cmdline, cpu_index = 0):
return self.cmd_obj({ 'execute': 'human-monitor-command', 'arguments':
{ 'command-line': cmdline,
'cpu-index': cpu_index } })
def _execute_cmd(self, cmdline):
if cmdline.split()[0] == "cpu":
# trap the cpu command, it requires special setting
try:
idx = int(cmdline.split()[1])
if not 'return' in self.__cmd_passthrough('info version', idx):
print 'bad CPU index'
return True
self.__cpu_index = idx
except ValueError:
print 'cpu command takes an integer argument'
return True
resp = self.__cmd_passthrough(cmdline, self.__cpu_index)
if resp is None:
print 'Disconnected'
return False
assert 'return' in resp or 'error' in resp
if 'return' in resp:
# Success
if len(resp['return']) > 0:
print resp['return'],
else:
# Error
print '%s: %s' % (resp['error']['class'], resp['error']['desc'])
return True
def show_banner(self):
QMPShell.show_banner(self, msg='Welcome to the HMP shell!')
def die(msg):
sys.stderr.write('ERROR: %s\n' % msg)
sys.exit(1)
def fail_cmdline(option=None):
if option:
sys.stderr.write('ERROR: bad command-line option \'%s\'\n' % option)
sys.stderr.write('qemu-shell [ -H ] < UNIX socket path> | < TCP address:port >\n')
sys.exit(1)
def main():
addr = ''
try:
if len(sys.argv) == 2:
qemu = QMPShell(sys.argv[1])
addr = sys.argv[1]
elif len(sys.argv) == 3:
if sys.argv[1] != '-H':
fail_cmdline(sys.argv[1])
qemu = HMPShell(sys.argv[2])
addr = sys.argv[2]
else:
fail_cmdline()
except QMPShellBadPort:
die('bad port number in command-line')
try:
qemu.connect()
except qmp.QMPConnectError:
die('Didn\'t get QMP greeting message')
except qmp.QMPCapabilitiesError:
die('Could not negotiate capabilities')
except qemu.error:
die('Could not connect to %s' % addr)
qemu.show_banner()
while qemu.read_exec_command('(QEMU) '):
pass
qemu.close()
if __name__ == '__main__':
main()

View File

@@ -1,272 +0,0 @@
QEMU Monitor Protocol Specification - Version 0.1
1. Introduction
===============
This document specifies the QEMU Monitor Protocol (QMP), a JSON-based protocol
which is available for applications to control QEMU at the machine-level.
To enable QMP support, QEMU has to be run in "control mode". This is done by
starting QEMU with the appropriate command-line options. Please, refer to the
QEMU manual page for more information.
2. Protocol Specification
=========================
This section details the protocol format. For the purpose of this document
"Client" is any application which is communicating with QEMU in control mode,
and "Server" is QEMU itself.
JSON data structures, when mentioned in this document, are always in the
following format:
json-DATA-STRUCTURE-NAME
Where DATA-STRUCTURE-NAME is any valid JSON data structure, as defined by
the JSON standard:
http://www.ietf.org/rfc/rfc4627.txt
For convenience, json-object members and json-array elements mentioned in
this document will be in a certain order. However, in real protocol usage
they can be in ANY order, thus no particular order should be assumed.
2.1 General Definitions
-----------------------
2.1.1 All interactions transmitted by the Server are json-objects, always
terminating with CRLF
2.1.2 All json-objects members are mandatory when not specified otherwise
2.2 Server Greeting
-------------------
Right when connected the Server will issue a greeting message, which signals
that the connection has been successfully established and that the Server is
ready for capabilities negotiation (for more information refer to section
'4. Capabilities Negotiation').
The format is:
{ "QMP": { "version": json-object, "capabilities": json-array } }
Where,
- The "version" member contains the Server's version information (the format
is the same of the 'query-version' command)
- The "capabilities" member specify the availability of features beyond the
baseline specification
2.3 Issuing Commands
--------------------
The format for command execution is:
{ "execute": json-string, "arguments": json-object, "id": json-value }
Where,
- The "execute" member identifies the command to be executed by the Server
- The "arguments" member is used to pass any arguments required for the
execution of the command, it is optional when no arguments are required
- The "id" member is a transaction identification associated with the
command execution, it is optional and will be part of the response if
provided
2.4 Commands Responses
----------------------
There are two possible responses which the Server will issue as the result
of a command execution: success or error.
2.4.1 success
-------------
The success response is issued when the command execution has finished
without errors.
The format is:
{ "return": json-object, "id": json-value }
Where,
- The "return" member contains the command returned data, which is defined
in a per-command basis or an empty json-object if the command does not
return data
- The "id" member contains the transaction identification associated
with the command execution (if issued by the Client)
2.4.2 error
-----------
The error response is issued when the command execution could not be
completed because of an error condition.
The format is:
{ "error": { "class": json-string, "data": json-object, "desc": json-string },
"id": json-value }
Where,
- The "class" member contains the error class name (eg. "ServiceUnavailable")
- The "data" member contains specific error data and is defined in a
per-command basis, it will be an empty json-object if the error has no data
- The "desc" member is a human-readable error message. Clients should
not attempt to parse this message.
- The "id" member contains the transaction identification associated with
the command execution (if issued by the Client)
NOTE: Some errors can occur before the Server is able to read the "id" member,
in these cases the "id" member will not be part of the error response, even
if provided by the client.
2.5 Asynchronous events
-----------------------
As a result of state changes, the Server may send messages unilaterally
to the Client at any time. They are called 'asynchronous events'.
The format is:
{ "event": json-string, "data": json-object,
"timestamp": { "seconds": json-number, "microseconds": json-number } }
Where,
- The "event" member contains the event's name
- The "data" member contains event specific data, which is defined in a
per-event basis, it is optional
- The "timestamp" member contains the exact time of when the event occurred
in the Server. It is a fixed json-object with time in seconds and
microseconds
For a listing of supported asynchronous events, please, refer to the
qmp-events.txt file.
3. QMP Examples
===============
This section provides some examples of real QMP usage, in all of them
'C' stands for 'Client' and 'S' stands for 'Server'.
3.1 Server greeting
-------------------
S: {"QMP": {"version": {"qemu": "0.12.50", "package": ""}, "capabilities": []}}
3.2 Simple 'stop' execution
---------------------------
C: { "execute": "stop" }
S: {"return": {}}
3.3 KVM information
-------------------
C: { "execute": "query-kvm", "id": "example" }
S: {"return": {"enabled": true, "present": true}, "id": "example"}
3.4 Parsing error
------------------
C: { "execute": }
S: {"error": {"class": "JSONParsing", "desc": "Invalid JSON syntax", "data":
{}}}
3.5 Powerdown event
-------------------
S: {"timestamp": {"seconds": 1258551470, "microseconds": 802384}, "event":
"POWERDOWN"}
4. Capabilities Negotiation
----------------------------
When a Client successfully establishes a connection, the Server is in
Capabilities Negotiation mode.
In this mode only the 'qmp_capabilities' command is allowed to run, all
other commands will return the CommandNotFound error. Asynchronous messages
are not delivered either.
Clients should use the 'qmp_capabilities' command to enable capabilities
advertised in the Server's greeting (section '2.2 Server Greeting') they
support.
When the 'qmp_capabilities' command is issued, and if it does not return an
error, the Server enters in Command mode where capabilities changes take
effect, all commands (except 'qmp_capabilities') are allowed and asynchronous
messages are delivered.
5 Compatibility Considerations
------------------------------
All protocol changes or new features which modify the protocol format in an
incompatible way are disabled by default and will be advertised by the
capabilities array (section '2.2 Server Greeting'). Thus, Clients can check
that array and enable the capabilities they support.
Additionally, Clients must not assume any particular:
- Size of json-objects or length of json-arrays
- Order of json-object members or json-array elements
- Amount of errors generated by a command, that is, new errors can be added
to any existing command in newer versions of the Server
6. Downstream extension of QMP
------------------------------
We recommend that downstream consumers of QEMU do *not* modify QMP.
Management tools should be able to support both upstream and downstream
versions of QMP without special logic, and downstream extensions are
inherently at odds with that.
However, we recognize that it is sometimes impossible for downstreams to
avoid modifying QMP. Both upstream and downstream need to take care to
preserve long-term compatibility and interoperability.
To help with that, QMP reserves JSON object member names beginning with
'__' (double underscore) for downstream use ("downstream names"). This
means upstream will never use any downstream names for its commands,
arguments, errors, asynchronous events, and so forth.
Any new names downstream wishes to add must begin with '__'. To
ensure compatibility with other downstreams, it is strongly
recommended that you prefix your downstram names with '__RFQDN_' where
RFQDN is a valid, reverse fully qualified domain name which you
control. For example, a qemu-kvm specific monitor command would be:
(qemu) __org.linux-kvm_enable_irqchip
Downstream must not change the server greeting (section 2.2) other than
to offer additional capabilities. But see below for why even that is
discouraged.
Section '5 Compatibility Considerations' applies to downstream as well
as to upstream, obviously. It follows that downstream must behave
exactly like upstream for any input not containing members with
downstream names ("downstream members"), except it may add members
with downstream names to its output.
Thus, a client should not be able to distinguish downstream from
upstream as long as it doesn't send input with downstream members, and
properly ignores any downstream members in the output it receives.
Advice on downstream modifications:
1. Introducing new commands is okay. If you want to extend an existing
command, consider introducing a new one with the new behaviour
instead.
2. Introducing new asynchronous messages is okay. If you want to extend
an existing message, consider adding a new one instead.
3. Introducing new errors for use in new commands is okay. Adding new
errors to existing commands counts as extension, so 1. applies.
4. New capabilities are strongly discouraged. Capabilities are for
evolving the basic protocol, and multiple diverging basic protocol
dialects are most undesirable.

View File

@@ -1,131 +0,0 @@
# QEMU Monitor Protocol Python class
#
# Copyright (C) 2009, 2010 Red Hat Inc.
#
# Authors:
# Luiz Capitulino <lcapitulino@redhat.com>
#
# This work is licensed under the terms of the GNU GPL, version 2. See
# the COPYING file in the top-level directory.
import json
import errno
import socket
class QMPError(Exception):
pass
class QMPConnectError(QMPError):
pass
class QMPCapabilitiesError(QMPError):
pass
class QEMUMonitorProtocol:
def __init__(self, address):
"""
Create a QEMUMonitorProtocol class.
@param address: QEMU address, can be either a unix socket path (string)
or a tuple in the form ( address, port ) for a TCP
connection
@note No connection is established, this is done by the connect() method
"""
self.__events = []
self.__address = address
self.__sock = self.__get_sock()
self.__sockfile = self.__sock.makefile()
def __get_sock(self):
if isinstance(self.__address, tuple):
family = socket.AF_INET
else:
family = socket.AF_UNIX
return socket.socket(family, socket.SOCK_STREAM)
def __json_read(self):
while True:
data = self.__sockfile.readline()
if not data:
return
resp = json.loads(data)
if 'event' in resp:
self.__events.append(resp)
continue
return resp
error = socket.error
def connect(self):
"""
Connect to the QMP Monitor and perform capabilities negotiation.
@return QMP greeting dict
@raise socket.error on socket connection errors
@raise QMPConnectError if the greeting is not received
@raise QMPCapabilitiesError if fails to negotiate capabilities
"""
self.__sock.connect(self.__address)
greeting = self.__json_read()
if greeting is None or not greeting.has_key('QMP'):
raise QMPConnectError
# Greeting seems ok, negotiate capabilities
resp = self.cmd('qmp_capabilities')
if "return" in resp:
return greeting
raise QMPCapabilitiesError
def cmd_obj(self, qmp_cmd):
"""
Send a QMP command to the QMP Monitor.
@param qmp_cmd: QMP command to be sent as a Python dict
@return QMP response as a Python dict or None if the connection has
been closed
"""
try:
self.__sock.sendall(json.dumps(qmp_cmd))
except socket.error, err:
if err[0] == errno.EPIPE:
return
raise socket.error(err)
return self.__json_read()
def cmd(self, name, args=None, id=None):
"""
Build a QMP command and send it to the QMP Monitor.
@param name: command name (string)
@param args: command arguments (dict)
@param id: command id (dict, list, string or int)
"""
qmp_cmd = { 'execute': name }
if args:
qmp_cmd['arguments'] = args
if id:
qmp_cmd['id'] = id
return self.cmd_obj(qmp_cmd)
def get_events(self):
"""
Get a list of available QMP events.
"""
self.__sock.setblocking(0)
try:
self.__json_read()
except socket.error, err:
if err[0] == errno.EAGAIN:
# No data available
pass
self.__sock.setblocking(1)
return self.__events
def clear_events(self):
"""
Clear current list of pending events.
"""
self.__events = []
def close(self):
self.__sock.close()
self.__sockfile.close()

View File

@@ -1 +1 @@
0.13.92
0.10.5

185
acl.c
View File

@@ -1,185 +0,0 @@
/*
* QEMU access control list management
*
* Copyright (C) 2009 Red Hat, Inc
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu-common.h"
#include "sysemu.h"
#include "acl.h"
#ifdef CONFIG_FNMATCH
#include <fnmatch.h>
#endif
static unsigned int nacls = 0;
static qemu_acl **acls = NULL;
qemu_acl *qemu_acl_find(const char *aclname)
{
int i;
for (i = 0 ; i < nacls ; i++) {
if (strcmp(acls[i]->aclname, aclname) == 0)
return acls[i];
}
return NULL;
}
qemu_acl *qemu_acl_init(const char *aclname)
{
qemu_acl *acl;
acl = qemu_acl_find(aclname);
if (acl)
return acl;
acl = qemu_malloc(sizeof(*acl));
acl->aclname = qemu_strdup(aclname);
/* Deny by default, so there is no window of "open
* access" between QEMU starting, and the user setting
* up ACLs in the monitor */
acl->defaultDeny = 1;
acl->nentries = 0;
QTAILQ_INIT(&acl->entries);
acls = qemu_realloc(acls, sizeof(*acls) * (nacls +1));
acls[nacls] = acl;
nacls++;
return acl;
}
int qemu_acl_party_is_allowed(qemu_acl *acl,
const char *party)
{
qemu_acl_entry *entry;
QTAILQ_FOREACH(entry, &acl->entries, next) {
#ifdef CONFIG_FNMATCH
if (fnmatch(entry->match, party, 0) == 0)
return entry->deny ? 0 : 1;
#else
/* No fnmatch, so fallback to exact string matching
* instead of allowing wildcards */
if (strcmp(entry->match, party) == 0)
return entry->deny ? 0 : 1;
#endif
}
return acl->defaultDeny ? 0 : 1;
}
void qemu_acl_reset(qemu_acl *acl)
{
qemu_acl_entry *entry;
/* Put back to deny by default, so there is no window
* of "open access" while the user re-initializes the
* access control list */
acl->defaultDeny = 1;
QTAILQ_FOREACH(entry, &acl->entries, next) {
QTAILQ_REMOVE(&acl->entries, entry, next);
free(entry->match);
free(entry);
}
acl->nentries = 0;
}
int qemu_acl_append(qemu_acl *acl,
int deny,
const char *match)
{
qemu_acl_entry *entry;
entry = qemu_malloc(sizeof(*entry));
entry->match = qemu_strdup(match);
entry->deny = deny;
QTAILQ_INSERT_TAIL(&acl->entries, entry, next);
acl->nentries++;
return acl->nentries;
}
int qemu_acl_insert(qemu_acl *acl,
int deny,
const char *match,
int index)
{
qemu_acl_entry *entry;
qemu_acl_entry *tmp;
int i = 0;
if (index <= 0)
return -1;
if (index >= acl->nentries)
return qemu_acl_append(acl, deny, match);
entry = qemu_malloc(sizeof(*entry));
entry->match = qemu_strdup(match);
entry->deny = deny;
QTAILQ_FOREACH(tmp, &acl->entries, next) {
i++;
if (i == index) {
QTAILQ_INSERT_BEFORE(tmp, entry, next);
acl->nentries++;
break;
}
}
return i;
}
int qemu_acl_remove(qemu_acl *acl,
const char *match)
{
qemu_acl_entry *entry;
int i = 0;
QTAILQ_FOREACH(entry, &acl->entries, next) {
i++;
if (strcmp(entry->match, match) == 0) {
QTAILQ_REMOVE(&acl->entries, entry, next);
return i;
}
}
return -1;
}
/*
* Local variables:
* c-indent-level: 4
* c-basic-offset: 4
* tab-width: 8
* End:
*/

74
acl.h
View File

@@ -1,74 +0,0 @@
/*
* QEMU access control list management
*
* Copyright (C) 2009 Red Hat, Inc
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef __QEMU_ACL_H__
#define __QEMU_ACL_H__
#include "qemu-queue.h"
typedef struct qemu_acl_entry qemu_acl_entry;
typedef struct qemu_acl qemu_acl;
struct qemu_acl_entry {
char *match;
int deny;
QTAILQ_ENTRY(qemu_acl_entry) next;
};
struct qemu_acl {
char *aclname;
unsigned int nentries;
QTAILQ_HEAD(,qemu_acl_entry) entries;
int defaultDeny;
};
qemu_acl *qemu_acl_init(const char *aclname);
qemu_acl *qemu_acl_find(const char *aclname);
int qemu_acl_party_is_allowed(qemu_acl *acl,
const char *party);
void qemu_acl_reset(qemu_acl *acl);
int qemu_acl_append(qemu_acl *acl,
int deny,
const char *match);
int qemu_acl_insert(qemu_acl *acl,
int deny,
const char *match,
int index);
int qemu_acl_remove(qemu_acl *acl,
const char *match);
#endif /* __QEMU_ACL_H__ */
/*
* Local variables:
* c-indent-level: 4
* c-basic-offset: 4
* tab-width: 8
* End:
*/

6
aes.c
View File

@@ -34,10 +34,16 @@
#define NDEBUG
#endif
#include <assert.h>
typedef uint32_t u32;
typedef uint16_t u16;
typedef uint8_t u8;
#define MAXKC (256/32)
#define MAXKB (256/8)
#define MAXNR 14
/* This controls loop-unrolling in aes_core.c */
#undef FULL_UNROLL
# define GETU32(pt) (((u32)(pt)[0] << 24) ^ ((u32)(pt)[1] << 16) ^ ((u32)(pt)[2] << 8) ^ ((u32)(pt)[3]))

66
aio.c
View File

@@ -13,13 +13,13 @@
#include "qemu-common.h"
#include "block.h"
#include "qemu-queue.h"
#include "sys-queue.h"
#include "qemu_socket.h"
typedef struct AioHandler AioHandler;
/* The list of registered AIO handlers */
static QLIST_HEAD(, AioHandler) aio_handlers;
static LIST_HEAD(, AioHandler) aio_handlers;
/* This is a simple lock used to protect the aio_handlers list. Specifically,
* it's used to ensure that no callbacks are removed while we're walking and
@@ -33,17 +33,16 @@ struct AioHandler
IOHandler *io_read;
IOHandler *io_write;
AioFlushHandler *io_flush;
AioProcessQueue *io_process_queue;
int deleted;
void *opaque;
QLIST_ENTRY(AioHandler) node;
LIST_ENTRY(AioHandler) node;
};
static AioHandler *find_aio_handler(int fd)
{
AioHandler *node;
QLIST_FOREACH(node, &aio_handlers, node) {
LIST_FOREACH(node, &aio_handlers, node) {
if (node->fd == fd)
if (!node->deleted)
return node;
@@ -56,7 +55,6 @@ int qemu_aio_set_fd_handler(int fd,
IOHandler *io_read,
IOHandler *io_write,
AioFlushHandler *io_flush,
AioProcessQueue *io_process_queue,
void *opaque)
{
AioHandler *node;
@@ -74,7 +72,7 @@ int qemu_aio_set_fd_handler(int fd,
* deleted because deleted nodes are only cleaned up after
* releasing the walking_handlers lock.
*/
QLIST_REMOVE(node, node);
LIST_REMOVE(node, node);
qemu_free(node);
}
}
@@ -83,13 +81,12 @@ int qemu_aio_set_fd_handler(int fd,
/* Alloc and insert if it's not already there */
node = qemu_mallocz(sizeof(AioHandler));
node->fd = fd;
QLIST_INSERT_HEAD(&aio_handlers, node, node);
LIST_INSERT_HEAD(&aio_handlers, node, node);
}
/* Update handler with latest information */
node->io_read = io_read;
node->io_write = io_write;
node->io_flush = io_flush;
node->io_process_queue = io_process_queue;
node->opaque = opaque;
}
@@ -106,38 +103,12 @@ void qemu_aio_flush(void)
do {
ret = 0;
/*
* If there are pending emulated aio start them now so flush
* will be able to return 1.
*/
LIST_FOREACH(node, &aio_handlers, node) {
ret |= node->io_flush(node->opaque);
}
qemu_aio_wait();
QLIST_FOREACH(node, &aio_handlers, node) {
if (node->io_flush) {
ret |= node->io_flush(node->opaque);
}
}
} while (qemu_bh_poll() || ret > 0);
}
int qemu_aio_process_queue(void)
{
AioHandler *node;
int ret = 0;
walking_handlers = 1;
QLIST_FOREACH(node, &aio_handlers, node) {
if (node->io_process_queue) {
if (node->io_process_queue(node->opaque)) {
ret = 1;
}
}
}
walking_handlers = 0;
return ret;
} while (ret > 0);
}
void qemu_aio_wait(void)
@@ -147,13 +118,6 @@ void qemu_aio_wait(void)
if (qemu_bh_poll())
return;
/*
* If there are callbacks left that have been queued, we need to call then.
* Return afterwards to avoid waiting needlessly in select().
*/
if (qemu_aio_process_queue())
return;
do {
AioHandler *node;
fd_set rdfds, wrfds;
@@ -165,7 +129,7 @@ void qemu_aio_wait(void)
FD_ZERO(&wrfds);
/* fill fd sets */
QLIST_FOREACH(node, &aio_handlers, node) {
LIST_FOREACH(node, &aio_handlers, node) {
/* If there aren't pending AIO operations, don't invoke callbacks.
* Otherwise, if there are no AIO requests, qemu_aio_wait() would
* wait indefinitely.
@@ -200,7 +164,7 @@ void qemu_aio_wait(void)
/* we have to walk very carefully in case
* qemu_aio_set_fd_handler is called while we're walking */
node = QLIST_FIRST(&aio_handlers);
node = LIST_FIRST(&aio_handlers);
while (node) {
AioHandler *tmp;
@@ -216,10 +180,10 @@ void qemu_aio_wait(void)
}
tmp = node;
node = QLIST_NEXT(node, node);
node = LIST_NEXT(node, node);
if (tmp->deleted) {
QLIST_REMOVE(tmp, node);
LIST_REMOVE(tmp, node);
qemu_free(tmp);
}
}

View File

@@ -16,15 +16,13 @@ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
the GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this file; see the file COPYING. If not, see
<http://www.gnu.org/licenses/>. */
along with this file; see the file COPYING. If not, write to the Free
Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
02110-1301, USA. */
#include <stdio.h>
#include "dis-asm.h"
/* MAX is redefined below, so remove any previous definition. */
#undef MAX
/* The opcode table is an array of struct alpha_opcode. */
struct alpha_opcode
@@ -111,8 +109,8 @@ struct alpha_operand
string (the operand will be inserted in any case). If the
operand value is legal, *ERRMSG will be unchanged (most operands
can accept any value). */
unsigned (*insert) (unsigned instruction, int op,
const char **errmsg);
unsigned (*insert) PARAMS ((unsigned instruction, int op,
const char **errmsg));
/* Extraction function. This is used by the disassembler. To
extract this operand type from an instruction, check this field.
@@ -131,7 +129,7 @@ struct alpha_operand
non-zero if this operand type can not actually be extracted from
this operand (i.e., the instruction does not match). If the
operand is valid, *INVALID will not be changed. */
int (*extract) (unsigned instruction, int *invalid);
int (*extract) PARAMS ((unsigned instruction, int *invalid));
};
/* Elements in the table are retrieved by indexing with values from
@@ -161,7 +159,7 @@ extern const unsigned alpha_num_operands;
instructions which want their operands to look like "Ra,disp(Rb)". */
#define AXP_OPERAND_PARENS 02
/* Used in combination with PARENS, this suppresses the suppression of
/* Used in combination with PARENS, this supresses the supression of
the comma. This is used for "jmp Ra,(Rb),hint". */
#define AXP_OPERAND_COMMA 04
@@ -182,7 +180,7 @@ extern const unsigned alpha_num_operands;
a flags value of 0 can be treated as end-of-arguments. */
#define AXP_OPERAND_UNSIGNED 0200
/* Suppress overflow detection on this field. This is used for hints. */
/* Supress overflow detection on this field. This is used for hints. */
#define AXP_OPERAND_NOOVERFLOW 0400
/* Mask for optional argument default value. */
@@ -276,23 +274,23 @@ enum bfd_reloc_code_real {
/* Local insertion and extraction functions */
static unsigned insert_rba (unsigned, int, const char **);
static unsigned insert_rca (unsigned, int, const char **);
static unsigned insert_za (unsigned, int, const char **);
static unsigned insert_zb (unsigned, int, const char **);
static unsigned insert_zc (unsigned, int, const char **);
static unsigned insert_bdisp (unsigned, int, const char **);
static unsigned insert_jhint (unsigned, int, const char **);
static unsigned insert_ev6hwjhint (unsigned, int, const char **);
static unsigned insert_rba PARAMS((unsigned, int, const char **));
static unsigned insert_rca PARAMS((unsigned, int, const char **));
static unsigned insert_za PARAMS((unsigned, int, const char **));
static unsigned insert_zb PARAMS((unsigned, int, const char **));
static unsigned insert_zc PARAMS((unsigned, int, const char **));
static unsigned insert_bdisp PARAMS((unsigned, int, const char **));
static unsigned insert_jhint PARAMS((unsigned, int, const char **));
static unsigned insert_ev6hwjhint PARAMS((unsigned, int, const char **));
static int extract_rba (unsigned, int *);
static int extract_rca (unsigned, int *);
static int extract_za (unsigned, int *);
static int extract_zb (unsigned, int *);
static int extract_zc (unsigned, int *);
static int extract_bdisp (unsigned, int *);
static int extract_jhint (unsigned, int *);
static int extract_ev6hwjhint (unsigned, int *);
static int extract_rba PARAMS((unsigned, int *));
static int extract_rca PARAMS((unsigned, int *));
static int extract_za PARAMS((unsigned, int *));
static int extract_zb PARAMS((unsigned, int *));
static int extract_zc PARAMS((unsigned, int *));
static int extract_bdisp PARAMS((unsigned, int *));
static int extract_jhint PARAMS((unsigned, int *));
static int extract_ev6hwjhint PARAMS((unsigned, int *));
/* The operands table */
@@ -437,13 +435,18 @@ const unsigned alpha_num_operands = sizeof(alpha_operands)/sizeof(*alpha_operand
/*ARGSUSED*/
static unsigned
insert_rba(unsigned insn, int value ATTRIBUTE_UNUSED, const char **errmsg ATTRIBUTE_UNUSED)
insert_rba(insn, value, errmsg)
unsigned insn;
int value ATTRIBUTE_UNUSED;
const char **errmsg ATTRIBUTE_UNUSED;
{
return insn | (((insn >> 21) & 0x1f) << 16);
}
static int
extract_rba(unsigned insn, int *invalid)
extract_rba(insn, invalid)
unsigned insn;
int *invalid;
{
if (invalid != (int *) NULL
&& ((insn >> 21) & 0x1f) != ((insn >> 16) & 0x1f))
@@ -456,13 +459,18 @@ extract_rba(unsigned insn, int *invalid)
/*ARGSUSED*/
static unsigned
insert_rca(unsigned insn, int value ATTRIBUTE_UNUSED, const char **errmsg ATTRIBUTE_UNUSED)
insert_rca(insn, value, errmsg)
unsigned insn;
int value ATTRIBUTE_UNUSED;
const char **errmsg ATTRIBUTE_UNUSED;
{
return insn | ((insn >> 21) & 0x1f);
}
static int
extract_rca(unsigned insn, int *invalid)
extract_rca(insn, invalid)
unsigned insn;
int *invalid;
{
if (invalid != (int *) NULL
&& ((insn >> 21) & 0x1f) != (insn & 0x1f))
@@ -475,13 +483,18 @@ extract_rca(unsigned insn, int *invalid)
/*ARGSUSED*/
static unsigned
insert_za(unsigned insn, int value ATTRIBUTE_UNUSED, const char **errmsg ATTRIBUTE_UNUSED)
insert_za(insn, value, errmsg)
unsigned insn;
int value ATTRIBUTE_UNUSED;
const char **errmsg ATTRIBUTE_UNUSED;
{
return insn | (31 << 21);
}
static int
extract_za(unsigned insn, int *invalid)
extract_za(insn, invalid)
unsigned insn;
int *invalid;
{
if (invalid != (int *) NULL && ((insn >> 21) & 0x1f) != 31)
*invalid = 1;
@@ -490,13 +503,18 @@ extract_za(unsigned insn, int *invalid)
/*ARGSUSED*/
static unsigned
insert_zb(unsigned insn, int value ATTRIBUTE_UNUSED, const char **errmsg ATTRIBUTE_UNUSED)
insert_zb(insn, value, errmsg)
unsigned insn;
int value ATTRIBUTE_UNUSED;
const char **errmsg ATTRIBUTE_UNUSED;
{
return insn | (31 << 16);
}
static int
extract_zb(unsigned insn, int *invalid)
extract_zb(insn, invalid)
unsigned insn;
int *invalid;
{
if (invalid != (int *) NULL && ((insn >> 16) & 0x1f) != 31)
*invalid = 1;
@@ -505,13 +523,18 @@ extract_zb(unsigned insn, int *invalid)
/*ARGSUSED*/
static unsigned
insert_zc(unsigned insn, int value ATTRIBUTE_UNUSED, const char **errmsg ATTRIBUTE_UNUSED)
insert_zc(insn, value, errmsg)
unsigned insn;
int value ATTRIBUTE_UNUSED;
const char **errmsg ATTRIBUTE_UNUSED;
{
return insn | 31;
}
static int
extract_zc(unsigned insn, int *invalid)
extract_zc(insn, invalid)
unsigned insn;
int *invalid;
{
if (invalid != (int *) NULL && (insn & 0x1f) != 31)
*invalid = 1;
@@ -522,7 +545,10 @@ extract_zc(unsigned insn, int *invalid)
/* The displacement field of a Branch format insn. */
static unsigned
insert_bdisp(unsigned insn, int value, const char **errmsg)
insert_bdisp(insn, value, errmsg)
unsigned insn;
int value;
const char **errmsg;
{
if (errmsg != (const char **)NULL && (value & 3))
*errmsg = _("branch operand unaligned");
@@ -531,7 +557,9 @@ insert_bdisp(unsigned insn, int value, const char **errmsg)
/*ARGSUSED*/
static int
extract_bdisp(unsigned insn, int *invalid ATTRIBUTE_UNUSED)
extract_bdisp(insn, invalid)
unsigned insn;
int *invalid ATTRIBUTE_UNUSED;
{
return 4 * (((insn & 0x1FFFFF) ^ 0x100000) - 0x100000);
}
@@ -540,7 +568,10 @@ extract_bdisp(unsigned insn, int *invalid ATTRIBUTE_UNUSED)
/* The hint field of a JMP/JSR insn. */
static unsigned
insert_jhint(unsigned insn, int value, const char **errmsg)
insert_jhint(insn, value, errmsg)
unsigned insn;
int value;
const char **errmsg;
{
if (errmsg != (const char **)NULL && (value & 3))
*errmsg = _("jump hint unaligned");
@@ -549,7 +580,9 @@ insert_jhint(unsigned insn, int value, const char **errmsg)
/*ARGSUSED*/
static int
extract_jhint(unsigned insn, int *invalid ATTRIBUTE_UNUSED)
extract_jhint(insn, invalid)
unsigned insn;
int *invalid ATTRIBUTE_UNUSED;
{
return 4 * (((insn & 0x3FFF) ^ 0x2000) - 0x2000);
}
@@ -557,7 +590,10 @@ extract_jhint(unsigned insn, int *invalid ATTRIBUTE_UNUSED)
/* The hint field of an EV6 HW_JMP/JSR insn. */
static unsigned
insert_ev6hwjhint(unsigned insn, int value, const char **errmsg)
insert_ev6hwjhint(insn, value, errmsg)
unsigned insn;
int value;
const char **errmsg;
{
if (errmsg != (const char **)NULL && (value & 3))
*errmsg = _("jump hint unaligned");
@@ -566,7 +602,9 @@ insert_ev6hwjhint(unsigned insn, int value, const char **errmsg)
/*ARGSUSED*/
static int
extract_ev6hwjhint(unsigned insn, int *invalid ATTRIBUTE_UNUSED)
extract_ev6hwjhint(insn, invalid)
unsigned insn;
int *invalid ATTRIBUTE_UNUSED;
{
return 4 * (((insn & 0x1FFF) ^ 0x1000) - 0x1000);
}
@@ -1767,7 +1805,9 @@ static const char * const vms_regnames[64] = {
/* Disassemble Alpha instructions. */
int
print_insn_alpha (bfd_vma memaddr, struct disassemble_info *info)
print_insn_alpha (memaddr, info)
bfd_vma memaddr;
struct disassemble_info *info;
{
static const struct alpha_opcode *opcode_index[AXP_NOPS+1];
const char * const * regnames;

View File

@@ -2,6 +2,7 @@ OUTPUT_FORMAT("elf64-alpha", "elf64-alpha",
"elf64-alpha")
OUTPUT_ARCH(alpha)
ENTRY(__start)
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/alpha-unknown-linux-gnu/lib);
SECTIONS
{
/* Read-only sections, merged into text segment: */

View File

@@ -1,726 +0,0 @@
/*
* QEMU System Emulator
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdint.h>
#include <stdarg.h>
#include <stdlib.h>
#ifndef _WIN32
#include <sys/types.h>
#include <sys/mman.h>
#endif
#include "config.h"
#include "monitor.h"
#include "sysemu.h"
#include "arch_init.h"
#include "audio/audio.h"
#include "hw/pc.h"
#include "hw/pci.h"
#include "hw/audiodev.h"
#include "kvm.h"
#include "migration.h"
#include "net.h"
#include "gdbstub.h"
#include "hw/smbios.h"
#ifdef TARGET_SPARC
int graphic_width = 1024;
int graphic_height = 768;
int graphic_depth = 8;
#else
int graphic_width = 800;
int graphic_height = 600;
int graphic_depth = 15;
#endif
const char arch_config_name[] = CONFIG_QEMU_CONFDIR "/target-" TARGET_ARCH ".conf";
#if defined(TARGET_ALPHA)
#define QEMU_ARCH QEMU_ARCH_ALPHA
#elif defined(TARGET_ARM)
#define QEMU_ARCH QEMU_ARCH_ARM
#elif defined(TARGET_CRIS)
#define QEMU_ARCH QEMU_ARCH_CRIS
#elif defined(TARGET_I386)
#define QEMU_ARCH QEMU_ARCH_I386
#elif defined(TARGET_M68K)
#define QEMU_ARCH QEMU_ARCH_M68K
#elif defined(TARGET_MICROBLAZE)
#define QEMU_ARCH QEMU_ARCH_MICROBLAZE
#elif defined(TARGET_MIPS)
#define QEMU_ARCH QEMU_ARCH_MIPS
#elif defined(TARGET_PPC)
#define QEMU_ARCH QEMU_ARCH_PPC
#elif defined(TARGET_S390X)
#define QEMU_ARCH QEMU_ARCH_S390X
#elif defined(TARGET_SH4)
#define QEMU_ARCH QEMU_ARCH_SH4
#elif defined(TARGET_SPARC)
#define QEMU_ARCH QEMU_ARCH_SPARC
#endif
const uint32_t arch_type = QEMU_ARCH;
/***********************************************************/
/* ram save/restore */
#define RAM_SAVE_FLAG_FULL 0x01 /* Obsolete, not used anymore */
#define RAM_SAVE_FLAG_COMPRESS 0x02
#define RAM_SAVE_FLAG_MEM_SIZE 0x04
#define RAM_SAVE_FLAG_PAGE 0x08
#define RAM_SAVE_FLAG_EOS 0x10
#define RAM_SAVE_FLAG_CONTINUE 0x20
static int is_dup_page(uint8_t *page, uint8_t ch)
{
uint32_t val = ch << 24 | ch << 16 | ch << 8 | ch;
uint32_t *array = (uint32_t *)page;
int i;
for (i = 0; i < (TARGET_PAGE_SIZE / 4); i++) {
if (array[i] != val) {
return 0;
}
}
return 1;
}
static RAMBlock *last_block;
static ram_addr_t last_offset;
static int ram_save_block(QEMUFile *f)
{
RAMBlock *block = last_block;
ram_addr_t offset = last_offset;
ram_addr_t current_addr;
int bytes_sent = 0;
if (!block)
block = QLIST_FIRST(&ram_list.blocks);
current_addr = block->offset + offset;
do {
if (cpu_physical_memory_get_dirty(current_addr, MIGRATION_DIRTY_FLAG)) {
uint8_t *p;
int cont = (block == last_block) ? RAM_SAVE_FLAG_CONTINUE : 0;
cpu_physical_memory_reset_dirty(current_addr,
current_addr + TARGET_PAGE_SIZE,
MIGRATION_DIRTY_FLAG);
p = block->host + offset;
if (is_dup_page(p, *p)) {
qemu_put_be64(f, offset | cont | RAM_SAVE_FLAG_COMPRESS);
if (!cont) {
qemu_put_byte(f, strlen(block->idstr));
qemu_put_buffer(f, (uint8_t *)block->idstr,
strlen(block->idstr));
}
qemu_put_byte(f, *p);
bytes_sent = 1;
} else {
qemu_put_be64(f, offset | cont | RAM_SAVE_FLAG_PAGE);
if (!cont) {
qemu_put_byte(f, strlen(block->idstr));
qemu_put_buffer(f, (uint8_t *)block->idstr,
strlen(block->idstr));
}
qemu_put_buffer(f, p, TARGET_PAGE_SIZE);
bytes_sent = TARGET_PAGE_SIZE;
}
break;
}
offset += TARGET_PAGE_SIZE;
if (offset >= block->length) {
offset = 0;
block = QLIST_NEXT(block, next);
if (!block)
block = QLIST_FIRST(&ram_list.blocks);
}
current_addr = block->offset + offset;
} while (current_addr != last_block->offset + last_offset);
last_block = block;
last_offset = offset;
return bytes_sent;
}
static uint64_t bytes_transferred;
static ram_addr_t ram_save_remaining(void)
{
RAMBlock *block;
ram_addr_t count = 0;
QLIST_FOREACH(block, &ram_list.blocks, next) {
ram_addr_t addr;
for (addr = block->offset; addr < block->offset + block->length;
addr += TARGET_PAGE_SIZE) {
if (cpu_physical_memory_get_dirty(addr, MIGRATION_DIRTY_FLAG)) {
count++;
}
}
}
return count;
}
uint64_t ram_bytes_remaining(void)
{
return ram_save_remaining() * TARGET_PAGE_SIZE;
}
uint64_t ram_bytes_transferred(void)
{
return bytes_transferred;
}
uint64_t ram_bytes_total(void)
{
RAMBlock *block;
uint64_t total = 0;
QLIST_FOREACH(block, &ram_list.blocks, next)
total += block->length;
return total;
}
static int block_compar(const void *a, const void *b)
{
RAMBlock * const *ablock = a;
RAMBlock * const *bblock = b;
if ((*ablock)->offset < (*bblock)->offset) {
return -1;
} else if ((*ablock)->offset > (*bblock)->offset) {
return 1;
}
return 0;
}
static void sort_ram_list(void)
{
RAMBlock *block, *nblock, **blocks;
int n;
n = 0;
QLIST_FOREACH(block, &ram_list.blocks, next) {
++n;
}
blocks = qemu_malloc(n * sizeof *blocks);
n = 0;
QLIST_FOREACH_SAFE(block, &ram_list.blocks, next, nblock) {
blocks[n++] = block;
QLIST_REMOVE(block, next);
}
qsort(blocks, n, sizeof *blocks, block_compar);
while (--n >= 0) {
QLIST_INSERT_HEAD(&ram_list.blocks, blocks[n], next);
}
qemu_free(blocks);
}
int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque)
{
ram_addr_t addr;
uint64_t bytes_transferred_last;
double bwidth = 0;
uint64_t expected_time = 0;
if (stage < 0) {
cpu_physical_memory_set_dirty_tracking(0);
return 0;
}
if (cpu_physical_sync_dirty_bitmap(0, TARGET_PHYS_ADDR_MAX) != 0) {
qemu_file_set_error(f);
return 0;
}
if (stage == 1) {
RAMBlock *block;
bytes_transferred = 0;
last_block = NULL;
last_offset = 0;
sort_ram_list();
/* Make sure all dirty bits are set */
QLIST_FOREACH(block, &ram_list.blocks, next) {
for (addr = block->offset; addr < block->offset + block->length;
addr += TARGET_PAGE_SIZE) {
if (!cpu_physical_memory_get_dirty(addr,
MIGRATION_DIRTY_FLAG)) {
cpu_physical_memory_set_dirty(addr);
}
}
}
/* Enable dirty memory tracking */
cpu_physical_memory_set_dirty_tracking(1);
qemu_put_be64(f, ram_bytes_total() | RAM_SAVE_FLAG_MEM_SIZE);
QLIST_FOREACH(block, &ram_list.blocks, next) {
qemu_put_byte(f, strlen(block->idstr));
qemu_put_buffer(f, (uint8_t *)block->idstr, strlen(block->idstr));
qemu_put_be64(f, block->length);
}
}
bytes_transferred_last = bytes_transferred;
bwidth = qemu_get_clock_ns(rt_clock);
while (!qemu_file_rate_limit(f)) {
int bytes_sent;
bytes_sent = ram_save_block(f);
bytes_transferred += bytes_sent;
if (bytes_sent == 0) { /* no more blocks */
break;
}
}
bwidth = qemu_get_clock_ns(rt_clock) - bwidth;
bwidth = (bytes_transferred - bytes_transferred_last) / bwidth;
/* if we haven't transferred anything this round, force expected_time to a
* a very high value, but without crashing */
if (bwidth == 0) {
bwidth = 0.000001;
}
/* try transferring iterative blocks of memory */
if (stage == 3) {
int bytes_sent;
/* flush all remaining blocks regardless of rate limiting */
while ((bytes_sent = ram_save_block(f)) != 0) {
bytes_transferred += bytes_sent;
}
cpu_physical_memory_set_dirty_tracking(0);
}
qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
expected_time = ram_save_remaining() * TARGET_PAGE_SIZE / bwidth;
return (stage == 2) && (expected_time <= migrate_max_downtime());
}
static inline void *host_from_stream_offset(QEMUFile *f,
ram_addr_t offset,
int flags)
{
static RAMBlock *block = NULL;
char id[256];
uint8_t len;
if (flags & RAM_SAVE_FLAG_CONTINUE) {
if (!block) {
fprintf(stderr, "Ack, bad migration stream!\n");
return NULL;
}
return block->host + offset;
}
len = qemu_get_byte(f);
qemu_get_buffer(f, (uint8_t *)id, len);
id[len] = 0;
QLIST_FOREACH(block, &ram_list.blocks, next) {
if (!strncmp(id, block->idstr, sizeof(id)))
return block->host + offset;
}
fprintf(stderr, "Can't find block %s!\n", id);
return NULL;
}
int ram_load(QEMUFile *f, void *opaque, int version_id)
{
ram_addr_t addr;
int flags;
if (version_id < 3 || version_id > 4) {
return -EINVAL;
}
do {
addr = qemu_get_be64(f);
flags = addr & ~TARGET_PAGE_MASK;
addr &= TARGET_PAGE_MASK;
if (flags & RAM_SAVE_FLAG_MEM_SIZE) {
if (version_id == 3) {
if (addr != ram_bytes_total()) {
return -EINVAL;
}
} else {
/* Synchronize RAM block list */
char id[256];
ram_addr_t length;
ram_addr_t total_ram_bytes = addr;
while (total_ram_bytes) {
RAMBlock *block;
uint8_t len;
len = qemu_get_byte(f);
qemu_get_buffer(f, (uint8_t *)id, len);
id[len] = 0;
length = qemu_get_be64(f);
QLIST_FOREACH(block, &ram_list.blocks, next) {
if (!strncmp(id, block->idstr, sizeof(id))) {
if (block->length != length)
return -EINVAL;
break;
}
}
if (!block) {
fprintf(stderr, "Unknown ramblock \"%s\", cannot "
"accept migration\n", id);
return -EINVAL;
}
total_ram_bytes -= length;
}
}
}
if (flags & RAM_SAVE_FLAG_COMPRESS) {
void *host;
uint8_t ch;
if (version_id == 3)
host = qemu_get_ram_ptr(addr);
else
host = host_from_stream_offset(f, addr, flags);
if (!host) {
return -EINVAL;
}
ch = qemu_get_byte(f);
memset(host, ch, TARGET_PAGE_SIZE);
#ifndef _WIN32
if (ch == 0 &&
(!kvm_enabled() || kvm_has_sync_mmu())) {
qemu_madvise(host, TARGET_PAGE_SIZE, QEMU_MADV_DONTNEED);
}
#endif
} else if (flags & RAM_SAVE_FLAG_PAGE) {
void *host;
if (version_id == 3)
host = qemu_get_ram_ptr(addr);
else
host = host_from_stream_offset(f, addr, flags);
qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
}
if (qemu_file_has_error(f)) {
return -EIO;
}
} while (!(flags & RAM_SAVE_FLAG_EOS));
return 0;
}
void qemu_service_io(void)
{
qemu_notify_event();
}
#ifdef HAS_AUDIO
struct soundhw {
const char *name;
const char *descr;
int enabled;
int isa;
union {
int (*init_isa) (qemu_irq *pic);
int (*init_pci) (PCIBus *bus);
} init;
};
static struct soundhw soundhw[] = {
#ifdef HAS_AUDIO_CHOICE
#if defined(TARGET_I386) || defined(TARGET_MIPS)
{
"pcspk",
"PC speaker",
0,
1,
{ .init_isa = pcspk_audio_init }
},
#endif
#ifdef CONFIG_SB16
{
"sb16",
"Creative Sound Blaster 16",
0,
1,
{ .init_isa = SB16_init }
},
#endif
#ifdef CONFIG_CS4231A
{
"cs4231a",
"CS4231A",
0,
1,
{ .init_isa = cs4231a_init }
},
#endif
#ifdef CONFIG_ADLIB
{
"adlib",
#ifdef HAS_YMF262
"Yamaha YMF262 (OPL3)",
#else
"Yamaha YM3812 (OPL2)",
#endif
0,
1,
{ .init_isa = Adlib_init }
},
#endif
#ifdef CONFIG_GUS
{
"gus",
"Gravis Ultrasound GF1",
0,
1,
{ .init_isa = GUS_init }
},
#endif
#ifdef CONFIG_AC97
{
"ac97",
"Intel 82801AA AC97 Audio",
0,
0,
{ .init_pci = ac97_init }
},
#endif
#ifdef CONFIG_ES1370
{
"es1370",
"ENSONIQ AudioPCI ES1370",
0,
0,
{ .init_pci = es1370_init }
},
#endif
#ifdef CONFIG_HDA
{
"hda",
"Intel HD Audio",
0,
0,
{ .init_pci = intel_hda_and_codec_init }
},
#endif
#endif /* HAS_AUDIO_CHOICE */
{ NULL, NULL, 0, 0, { NULL } }
};
void select_soundhw(const char *optarg)
{
struct soundhw *c;
if (*optarg == '?') {
show_valid_cards:
printf("Valid sound card names (comma separated):\n");
for (c = soundhw; c->name; ++c) {
printf ("%-11s %s\n", c->name, c->descr);
}
printf("\n-soundhw all will enable all of the above\n");
exit(*optarg != '?');
}
else {
size_t l;
const char *p;
char *e;
int bad_card = 0;
if (!strcmp(optarg, "all")) {
for (c = soundhw; c->name; ++c) {
c->enabled = 1;
}
return;
}
p = optarg;
while (*p) {
e = strchr(p, ',');
l = !e ? strlen(p) : (size_t) (e - p);
for (c = soundhw; c->name; ++c) {
if (!strncmp(c->name, p, l) && !c->name[l]) {
c->enabled = 1;
break;
}
}
if (!c->name) {
if (l > 80) {
fprintf(stderr,
"Unknown sound card name (too big to show)\n");
}
else {
fprintf(stderr, "Unknown sound card name `%.*s'\n",
(int) l, p);
}
bad_card = 1;
}
p += l + (e != NULL);
}
if (bad_card) {
goto show_valid_cards;
}
}
}
void audio_init(qemu_irq *isa_pic, PCIBus *pci_bus)
{
struct soundhw *c;
for (c = soundhw; c->name; ++c) {
if (c->enabled) {
if (c->isa) {
if (isa_pic) {
c->init.init_isa(isa_pic);
}
} else {
if (pci_bus) {
c->init.init_pci(pci_bus);
}
}
}
}
}
#else
void select_soundhw(const char *optarg)
{
}
void audio_init(qemu_irq *isa_pic, PCIBus *pci_bus)
{
}
#endif
int qemu_uuid_parse(const char *str, uint8_t *uuid)
{
int ret;
if (strlen(str) != 36) {
return -1;
}
ret = sscanf(str, UUID_FMT, &uuid[0], &uuid[1], &uuid[2], &uuid[3],
&uuid[4], &uuid[5], &uuid[6], &uuid[7], &uuid[8], &uuid[9],
&uuid[10], &uuid[11], &uuid[12], &uuid[13], &uuid[14],
&uuid[15]);
if (ret != 16) {
return -1;
}
#ifdef TARGET_I386
smbios_add_field(1, offsetof(struct smbios_type_1, uuid), 16, uuid);
#endif
return 0;
}
void do_acpitable_option(const char *optarg)
{
#ifdef TARGET_I386
if (acpi_table_add(optarg) < 0) {
fprintf(stderr, "Wrong acpi table provided\n");
exit(1);
}
#endif
}
void do_smbios_option(const char *optarg)
{
#ifdef TARGET_I386
if (smbios_entry_add(optarg) < 0) {
fprintf(stderr, "Wrong smbios provided\n");
exit(1);
}
#endif
}
void cpudef_init(void)
{
#if defined(cpudef_setup)
cpudef_setup(); /* parse cpu definitions in target config file */
#endif
}
int audio_available(void)
{
#ifdef HAS_AUDIO
return 1;
#else
return 0;
#endif
}
int kvm_available(void)
{
#ifdef CONFIG_KVM
return 1;
#else
return 0;
#endif
}
int xen_available(void)
{
#ifdef CONFIG_XEN
return 1;
#else
return 0;
#endif
}

View File

@@ -1,34 +0,0 @@
#ifndef QEMU_ARCH_INIT_H
#define QEMU_ARCH_INIT_H
extern const char arch_config_name[];
enum {
QEMU_ARCH_ALL = -1,
QEMU_ARCH_ALPHA = 1,
QEMU_ARCH_ARM = 2,
QEMU_ARCH_CRIS = 4,
QEMU_ARCH_I386 = 8,
QEMU_ARCH_M68K = 16,
QEMU_ARCH_MICROBLAZE = 32,
QEMU_ARCH_MIPS = 64,
QEMU_ARCH_PPC = 128,
QEMU_ARCH_S390X = 256,
QEMU_ARCH_SH4 = 512,
QEMU_ARCH_SPARC = 1024,
};
extern const uint32_t arch_type;
void select_soundhw(const char *optarg);
int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque);
int ram_load(QEMUFile *f, void *opaque, int version_id);
void do_acpitable_option(const char *optarg);
void do_smbios_option(const char *optarg);
void cpudef_init(void);
int audio_available(void);
void audio_init(qemu_irq *isa_pic, PCIBus *pci_bus);
int kvm_available(void);
int xen_available(void);
#endif

163
arm-dis.c
View File

@@ -17,12 +17,15 @@
more details.
You should have received a copy of the GNU General Public License
along with this program; if not, see <http://www.gnu.org/licenses/>. */
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
/* Start of qemu specific additions. Mostly this is stub definitions
for things we don't care about. */
#include "dis-asm.h"
#define FALSE 0
#define TRUE (!FALSE)
#define ATTRIBUTE_UNUSED __attribute__((unused))
#define ISSPACE(x) ((x) == ' ' || (x) == '\t' || (x) == '\n')
@@ -60,8 +63,10 @@
#define FPU_VFP_EXT_V3 0
#define FPU_NEON_EXT_V1 0
int floatformat_ieee_single_little;
/* Assume host uses ieee float. */
static void floatformat_to_double (unsigned char *data, double *dest)
static void floatformat_to_double (int *ignored, unsigned char *data,
double *dest)
{
union {
uint32_t i;
@@ -1527,7 +1532,7 @@ static unsigned int regname_selected = 1;
#define NUM_ARM_REGNAMES NUM_ELEM (regnames)
#define arm_regnames regnames[regname_selected].reg_names
static bfd_boolean force_thumb = false;
static bfd_boolean force_thumb = FALSE;
/* Current IT instruction state. This contains the same state as the IT
bits in the CPSR. */
@@ -1549,6 +1554,32 @@ enum map_type last_type;
int last_mapping_sym = -1;
bfd_vma last_mapping_addr = 0;
/* Functions. */
int
get_arm_regname_num_options (void)
{
return NUM_ARM_REGNAMES;
}
int
set_arm_regname_option (int option)
{
int old = regname_selected;
regname_selected = option;
return old;
}
int
get_arm_regnames (int option, const char **setname, const char **setdescription,
const char *const **register_names)
{
*setname = regnames[option].name;
*setdescription = regnames[option].description;
*register_names = regnames[option].reg_names;
return 16;
}
/* Decode a bitfield of the form matching regexp (N(-N)?,)*N(-N)?.
Returns pointer to following character of the format string and
fills in *VALUEP and *WIDTHP with the extracted value and number of
@@ -1587,7 +1618,7 @@ arm_decode_bitfield (const char *ptr, unsigned long insn,
}
static void
arm_decode_shift (long given, fprintf_function func, void *stream,
arm_decode_shift (long given, fprintf_ftype func, void *stream,
int print_shift)
{
func (stream, "%s", arm_regnames[given & 0xf]);
@@ -1624,7 +1655,7 @@ arm_decode_shift (long given, fprintf_function func, void *stream,
}
/* Print one coprocessor instruction on INFO->STREAM.
Return true if the instuction matched, false if this is not a
Return TRUE if the instuction matched, FALSE if this is not a
recognised coprocessor instruction. */
static bfd_boolean
@@ -1633,7 +1664,7 @@ print_insn_coprocessor (bfd_vma pc, struct disassemble_info *info, long given,
{
const struct opcode32 *insn;
void *stream = info->stream;
fprintf_function func = info->fprintf_func;
fprintf_ftype func = info->fprintf_func;
unsigned long mask;
unsigned long value;
int cond;
@@ -2117,17 +2148,17 @@ print_insn_coprocessor (bfd_vma pc, struct disassemble_info *info, long given,
else
func (stream, "%c", *c);
}
return true;
return TRUE;
}
}
return false;
return FALSE;
}
static void
print_arm_address (bfd_vma pc, struct disassemble_info *info, long given)
{
void *stream = info->stream;
fprintf_function func = info->fprintf_func;
fprintf_ftype func = info->fprintf_func;
if (((given & 0x000f0000) == 0x000f0000)
&& ((given & 0x02000000) == 0))
@@ -2214,7 +2245,7 @@ print_arm_address (bfd_vma pc, struct disassemble_info *info, long given)
}
/* Print one neon instruction on INFO->STREAM.
Return true if the instuction matched, false if this is not a
Return TRUE if the instuction matched, FALSE if this is not a
recognised neon instruction. */
static bfd_boolean
@@ -2222,7 +2253,7 @@ print_insn_neon (struct disassemble_info *info, long given, bfd_boolean thumb)
{
const struct opcode32 *insn;
void *stream = info->stream;
fprintf_function func = info->fprintf_func;
fprintf_ftype func = info->fprintf_func;
if (thumb)
{
@@ -2240,7 +2271,7 @@ print_insn_neon (struct disassemble_info *info, long given, bfd_boolean thumb)
else if ((given & 0xff000000) == 0xf9000000)
given ^= 0xf9000000 ^ 0xf4000000;
else
return false;
return FALSE;
}
for (insn = neon_opcodes; insn->assembler; insn++)
@@ -2330,34 +2361,34 @@ print_insn_neon (struct disassemble_info *info, long given, bfd_boolean thumb)
{
int amask = (1 << size) - 1;
if ((idx_align & (1 << size)) != 0)
return false;
return FALSE;
if (size > 0)
{
if ((idx_align & amask) == amask)
align = 8 << size;
else if ((idx_align & amask) != 0)
return false;
return FALSE;
}
}
break;
case 2:
if (size == 2 && (idx_align & 2) != 0)
return false;
return FALSE;
align = (idx_align & 1) ? 16 << size : 0;
break;
case 3:
if ((size == 2 && (idx_align & 3) != 0)
|| (idx_align & 1) != 0)
return false;
return FALSE;
break;
case 4:
if (size == 2)
{
if ((idx_align & 3) == 3)
return false;
return FALSE;
align = (idx_align & 3) * 64;
}
else
@@ -2515,6 +2546,7 @@ print_insn_neon (struct disassemble_info *info, long given, bfd_boolean thumb)
{
func (stream, "<illegal constant %.8x:%x:%x>",
bits, cmode, op);
size = 32;
break;
}
switch (size)
@@ -2540,7 +2572,9 @@ print_insn_neon (struct disassemble_info *info, long given, bfd_boolean thumb)
valbytes[2] = (value >> 16) & 0xff;
valbytes[3] = (value >> 24) & 0xff;
floatformat_to_double (valbytes, &fvalue);
floatformat_to_double
(&floatformat_ieee_single_little, valbytes,
&fvalue);
func (stream, "#%.7g\t; 0x%.8lx", fvalue,
value);
@@ -2663,10 +2697,10 @@ print_insn_neon (struct disassemble_info *info, long given, bfd_boolean thumb)
else
func (stream, "%c", *c);
}
return true;
return TRUE;
}
}
return false;
return FALSE;
}
/* Print one ARM instruction from PC on INFO->STREAM. */
@@ -2676,12 +2710,12 @@ print_insn_arm_internal (bfd_vma pc, struct disassemble_info *info, long given)
{
const struct opcode32 *insn;
void *stream = info->stream;
fprintf_function func = info->fprintf_func;
fprintf_ftype func = info->fprintf_func;
if (print_insn_coprocessor (pc, info, given, false))
if (print_insn_coprocessor (pc, info, given, FALSE))
return;
if (print_insn_neon (info, given, false))
if (print_insn_neon (info, given, FALSE))
return;
for (insn = arm_opcodes; insn->assembler; insn++)
@@ -3036,7 +3070,7 @@ print_insn_thumb16 (bfd_vma pc, struct disassemble_info *info, long given)
{
const struct opcode16 *insn;
void *stream = info->stream;
fprintf_function func = info->fprintf_func;
fprintf_ftype func = info->fprintf_func;
for (insn = thumb_opcodes; insn->assembler; insn++)
if ((given & insn->mask) == insn->value)
@@ -3148,14 +3182,14 @@ print_insn_thumb16 (bfd_vma pc, struct disassemble_info *info, long given)
if (started)
func (stream, ", ");
started = 1;
func (stream, "%s", arm_regnames[14] /* "lr" */);
func (stream, arm_regnames[14] /* "lr" */);
}
if (domaskpc)
{
if (started)
func (stream, ", ");
func (stream, "%s", arm_regnames[15] /* "pc" */);
func (stream, arm_regnames[15] /* "pc" */);
}
func (stream, "}");
@@ -3312,12 +3346,12 @@ print_insn_thumb32 (bfd_vma pc, struct disassemble_info *info, long given)
{
const struct opcode32 *insn;
void *stream = info->stream;
fprintf_function func = info->fprintf_func;
fprintf_ftype func = info->fprintf_func;
if (print_insn_coprocessor (pc, info, given, true))
if (print_insn_coprocessor (pc, info, given, TRUE))
return;
if (print_insn_neon (info, given, true))
if (print_insn_neon (info, given, TRUE))
return;
for (insn = thumb32_opcodes; insn->assembler; insn++)
@@ -3452,7 +3486,7 @@ print_insn_thumb32 (bfd_vma pc, struct disassemble_info *info, long given)
unsigned int op = (given & 0x00000f00) >> 8;
unsigned int i12 = (given & 0x00000fff);
unsigned int i8 = (given & 0x000000ff);
bfd_boolean writeback = false, postind = false;
bfd_boolean writeback = FALSE, postind = FALSE;
int offset = 0;
func (stream, "[%s", arm_regnames[Rn]);
@@ -3482,22 +3516,22 @@ print_insn_thumb32 (bfd_vma pc, struct disassemble_info *info, long given)
case 0xF: /* 8-bit + preindex with wb */
offset = i8;
writeback = true;
writeback = TRUE;
break;
case 0xD: /* 8-bit - preindex with wb */
offset = -i8;
writeback = true;
writeback = TRUE;
break;
case 0xB: /* 8-bit + postindex */
offset = i8;
postind = true;
postind = TRUE;
break;
case 0x9: /* 8-bit - postindex */
offset = -i8;
postind = true;
postind = TRUE;
break;
default:
@@ -3698,7 +3732,7 @@ print_insn_thumb32 (bfd_vma pc, struct disassemble_info *info, long given)
}
else
{
func (stream, "%s", psr_name (given & 0xff));
func (stream, psr_name (given & 0xff));
}
break;
@@ -3706,7 +3740,7 @@ print_insn_thumb32 (bfd_vma pc, struct disassemble_info *info, long given)
if ((given & 0xff) == 0)
func (stream, "%cPSR", (given & 0x100000) ? 'S' : 'C');
else
func (stream, "%s", psr_name (given & 0xff));
func (stream, psr_name (given & 0xff));
break;
case '0': case '1': case '2': case '3': case '4':
@@ -3870,12 +3904,12 @@ print_insn_arm (bfd_vma pc, struct disassemble_info *info)
unsigned char b[4];
long given;
int status;
int is_thumb = false;
int is_data = false;
int is_thumb = FALSE;
int is_data = FALSE;
unsigned int size = 4;
void (*printer) (bfd_vma, struct disassemble_info *, long);
#if 0
bfd_boolean found = false;
bfd_boolean found = FALSE;
if (info->disassembler_options)
{
@@ -3898,7 +3932,7 @@ print_insn_arm (bfd_vma pc, struct disassemble_info *info)
if (pc <= last_mapping_addr)
last_mapping_sym = -1;
is_thumb = (last_type == MAP_THUMB);
found = false;
found = FALSE;
/* Start scanning at the start of the function, or wherever
we finished last time. */
n = info->symtab_pos + 1;
@@ -3916,7 +3950,7 @@ print_insn_arm (bfd_vma pc, struct disassemble_info *info)
&& get_sym_code_type (info, n, &type))
{
last_sym = n;
found = true;
found = TRUE;
}
}
@@ -3933,7 +3967,7 @@ print_insn_arm (bfd_vma pc, struct disassemble_info *info)
if (get_sym_code_type (info, n, &type))
{
last_sym = n;
found = true;
found = TRUE;
break;
}
}
@@ -4005,7 +4039,7 @@ print_insn_arm (bfd_vma pc, struct disassemble_info *info)
#endif
if (force_thumb)
is_thumb = true;
is_thumb = TRUE;
info->bytes_per_line = 4;
@@ -4101,30 +4135,6 @@ print_insn_arm (bfd_vma pc, struct disassemble_info *info)
addresses, since the addend is not currently pc-relative. */
pc = 0;
/* We include the hexdump of the instruction. The format here
matches that used by objdump and the ARM ARM (in particular,
32 bit Thumb instructions are displayed as pairs of halfwords,
not as a single word.) */
if (is_thumb)
{
if (size == 2)
{
info->fprintf_func(info->stream, "%04lx ",
((unsigned long)given) & 0xffff);
}
else
{
info->fprintf_func(info->stream, "%04lx %04lx ",
(((unsigned long)given) >> 16) & 0xffff,
((unsigned long)given) & 0xffff);
}
}
else
{
info->fprintf_func(info->stream, "%08lx ",
((unsigned long)given) & 0xffffffff);
}
printer (pc, info, given);
if (is_thumb)
@@ -4134,3 +4144,22 @@ print_insn_arm (bfd_vma pc, struct disassemble_info *info)
}
return size;
}
void
print_arm_disassembler_options (FILE *stream)
{
int i;
fprintf (stream, _("\n\
The following ARM specific disassembler options are supported for use with\n\
the -M switch:\n"));
for (i = NUM_ARM_REGNAMES; i--;)
fprintf (stream, " reg-names-%s %*c%s\n",
regnames[i].name,
(int)(14 - strlen (regnames[i].name)), ' ',
regnames[i].description);
fprintf (stream, " force-thumb Assume all insns are Thumb insns\n");
fprintf (stream, " no-force-thumb Examine preceeding label to determine an insn's type\n\n");
}

View File

@@ -15,7 +15,9 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <sys/types.h>
@@ -373,64 +375,45 @@ uint32_t do_arm_semihosting(CPUState *env)
#ifdef CONFIG_USER_ONLY
/* Build a commandline from the original argv. */
{
char *arm_cmdline_buffer;
const char *host_cmdline_buffer;
char **arg = ts->info->host_argv;
int len = ARG(1);
/* lock the buffer on the ARM side */
char *cmdline_buffer = (char*)lock_user(VERIFY_WRITE, ARG(0), len, 0);
unsigned int i;
unsigned int arm_cmdline_len = ARG(1);
unsigned int host_cmdline_len =
ts->info->arg_end-ts->info->arg_start;
if (!cmdline_buffer)
/* FIXME - should this error code be -TARGET_EFAULT ? */
return (uint32_t)-1;
if (!arm_cmdline_len || host_cmdline_len > arm_cmdline_len) {
return -1; /* not enough space to store command line */
}
s = cmdline_buffer;
while (*arg && len > 2) {
int n = strlen(*arg);
if (!host_cmdline_len) {
/* We special-case the "empty command line" case (argc==0).
Just provide the terminating 0. */
arm_cmdline_buffer = lock_user(VERIFY_WRITE, ARG(0), 1, 0);
arm_cmdline_buffer[0] = 0;
unlock_user(arm_cmdline_buffer, ARG(0), 1);
/* Adjust the commandline length argument. */
SET_ARG(1, 0);
return 0;
}
/* lock the buffers on the ARM side */
arm_cmdline_buffer =
lock_user(VERIFY_WRITE, ARG(0), host_cmdline_len, 0);
host_cmdline_buffer =
lock_user(VERIFY_READ, ts->info->arg_start,
host_cmdline_len, 1);
if (arm_cmdline_buffer && host_cmdline_buffer)
{
/* the last argument is zero-terminated;
no need for additional termination */
memcpy(arm_cmdline_buffer, host_cmdline_buffer,
host_cmdline_len);
/* separate arguments by white spaces */
for (i = 0; i < host_cmdline_len-1; i++) {
if (arm_cmdline_buffer[i] == 0) {
arm_cmdline_buffer[i] = ' ';
}
if (s != cmdline_buffer) {
*(s++) = ' ';
len--;
}
/* Adjust the commandline length argument. */
SET_ARG(1, host_cmdline_len-1);
if (n >= len)
n = len - 1;
memcpy(s, *arg, n);
s += n;
len -= n;
arg++;
}
/* Null terminate the string. */
*s = 0;
len = s - cmdline_buffer;
/* Unlock the buffers on the ARM side. */
unlock_user(arm_cmdline_buffer, ARG(0), host_cmdline_len);
unlock_user((void*)host_cmdline_buffer, ts->info->arg_start, 0);
/* Unlock the buffer on the ARM side. */
unlock_user(cmdline_buffer, ARG(0), len);
/* Return success if we could return a commandline. */
return (arm_cmdline_buffer && host_cmdline_buffer) ? 0 : -1;
/* Adjust the commandline length argument. */
SET_ARG(1, len);
/* Return success if commandline fit into buffer. */
return *arg ? -1 : 0;
}
#else
return -1;
return -1;
#endif
case SYS_HEAPINFO:
{
@@ -478,7 +461,6 @@ uint32_t do_arm_semihosting(CPUState *env)
return 0;
}
case SYS_EXIT:
gdb_exit(env, 0);
exit(0);
default:
fprintf(stderr, "qemu: Unsupported SemiHosting SWI 0x%02x\n", nr);

1
arm.ld
View File

@@ -2,6 +2,7 @@ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm",
"elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/alpha-unknown-linux-gnu/lib);
SECTIONS
{
/* Read-only sections, merged into text segment: */

216
async.c
View File

@@ -1,216 +0,0 @@
/*
* QEMU System Emulator
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu-common.h"
#include "qemu-aio.h"
/*
* An AsyncContext protects the callbacks of AIO requests and Bottom Halves
* against interfering with each other. A typical example is qcow2 that accepts
* asynchronous requests, but relies for manipulation of its metadata on
* synchronous bdrv_read/write that doesn't trigger any callbacks.
*
* However, these functions are often emulated using AIO which means that AIO
* callbacks must be run - but at the same time we must not run callbacks of
* other requests as they might start to modify metadata and corrupt the
* internal state of the caller of bdrv_read/write.
*
* To achieve the desired semantics we switch into a new AsyncContext.
* Callbacks must only be run if they belong to the current AsyncContext.
* Otherwise they need to be queued until their own context is active again.
* This is how you can make qemu_aio_wait() wait only for your own callbacks.
*
* The AsyncContexts form a stack. When you leave a AsyncContexts, you always
* return to the old ("parent") context.
*/
struct AsyncContext {
/* Consecutive number of the AsyncContext (position in the stack) */
int id;
/* Anchor of the list of Bottom Halves belonging to the context */
struct QEMUBH *first_bh;
/* Link to parent context */
struct AsyncContext *parent;
};
/* The currently active AsyncContext */
static struct AsyncContext *async_context = &(struct AsyncContext) { 0 };
/*
* Enter a new AsyncContext. Already scheduled Bottom Halves and AIO callbacks
* won't be called until this context is left again.
*/
void async_context_push(void)
{
struct AsyncContext *new = qemu_mallocz(sizeof(*new));
new->parent = async_context;
new->id = async_context->id + 1;
async_context = new;
}
/* Run queued AIO completions and destroy Bottom Half */
static void bh_run_aio_completions(void *opaque)
{
QEMUBH **bh = opaque;
qemu_bh_delete(*bh);
qemu_free(bh);
qemu_aio_process_queue();
}
/*
* Leave the currently active AsyncContext. All Bottom Halves belonging to the
* old context are executed before changing the context.
*/
void async_context_pop(void)
{
struct AsyncContext *old = async_context;
QEMUBH **bh;
/* Flush the bottom halves, we don't want to lose them */
while (qemu_bh_poll());
/* Switch back to the parent context */
async_context = async_context->parent;
qemu_free(old);
if (async_context == NULL) {
abort();
}
/* Schedule BH to run any queued AIO completions as soon as possible */
bh = qemu_malloc(sizeof(*bh));
*bh = qemu_bh_new(bh_run_aio_completions, bh);
qemu_bh_schedule(*bh);
}
/*
* Returns the ID of the currently active AsyncContext
*/
int get_async_context_id(void)
{
return async_context->id;
}
/***********************************************************/
/* bottom halves (can be seen as timers which expire ASAP) */
struct QEMUBH {
QEMUBHFunc *cb;
void *opaque;
int scheduled;
int idle;
int deleted;
QEMUBH *next;
};
QEMUBH *qemu_bh_new(QEMUBHFunc *cb, void *opaque)
{
QEMUBH *bh;
bh = qemu_mallocz(sizeof(QEMUBH));
bh->cb = cb;
bh->opaque = opaque;
bh->next = async_context->first_bh;
async_context->first_bh = bh;
return bh;
}
int qemu_bh_poll(void)
{
QEMUBH *bh, **bhp;
int ret;
ret = 0;
for (bh = async_context->first_bh; bh; bh = bh->next) {
if (!bh->deleted && bh->scheduled) {
bh->scheduled = 0;
if (!bh->idle)
ret = 1;
bh->idle = 0;
bh->cb(bh->opaque);
}
}
/* remove deleted bhs */
bhp = &async_context->first_bh;
while (*bhp) {
bh = *bhp;
if (bh->deleted) {
*bhp = bh->next;
qemu_free(bh);
} else
bhp = &bh->next;
}
return ret;
}
void qemu_bh_schedule_idle(QEMUBH *bh)
{
if (bh->scheduled)
return;
bh->scheduled = 1;
bh->idle = 1;
}
void qemu_bh_schedule(QEMUBH *bh)
{
if (bh->scheduled)
return;
bh->scheduled = 1;
bh->idle = 0;
/* stop the currently executing CPU to execute the BH ASAP */
qemu_notify_event();
}
void qemu_bh_cancel(QEMUBH *bh)
{
bh->scheduled = 0;
}
void qemu_bh_delete(QEMUBH *bh)
{
bh->scheduled = 0;
bh->deleted = 1;
}
void qemu_bh_update_timeout(int *timeout)
{
QEMUBH *bh;
for (bh = async_context->first_bh; bh; bh = bh->next) {
if (!bh->deleted && bh->scheduled) {
if (bh->idle) {
/* idle bottom halves will be polled at least
* every 10ms */
*timeout = MIN(10, *timeout);
} else {
/* non-idle bottom halves will be executed
* immediately */
*timeout = 0;
break;
}
}
}
}

View File

@@ -23,37 +23,21 @@
*/
#include <alsa/asoundlib.h>
#include "qemu-common.h"
#include "qemu-char.h"
#include "audio.h"
#if QEMU_GNUC_PREREQ(4, 3)
#pragma GCC diagnostic ignored "-Waddress"
#endif
#define AUDIO_CAP "alsa"
#include "audio_int.h"
struct pollhlp {
snd_pcm_t *handle;
struct pollfd *pfds;
int count;
int mask;
};
typedef struct ALSAVoiceOut {
HWVoiceOut hw;
int wpos;
int pending;
void *pcm_buf;
snd_pcm_t *handle;
struct pollhlp pollhlp;
} ALSAVoiceOut;
typedef struct ALSAVoiceIn {
HWVoiceIn hw;
snd_pcm_t *handle;
void *pcm_buf;
struct pollhlp pollhlp;
} ALSAVoiceIn;
static struct {
@@ -74,8 +58,7 @@ static struct {
int period_size_out_overridden;
int verbose;
} conf = {
.buffer_size_out = 4096,
.period_size_out = 1024,
.buffer_size_out = 1024,
.pcm_name_out = "default",
.pcm_name_in = "default",
};
@@ -127,23 +110,7 @@ static void GCC_FMT_ATTR (3, 4) alsa_logerr2 (
AUD_log (AUDIO_CAP, "Reason: %s\n", snd_strerror (err));
}
static void alsa_fini_poll (struct pollhlp *hlp)
{
int i;
struct pollfd *pfds = hlp->pfds;
if (pfds) {
for (i = 0; i < hlp->count; ++i) {
qemu_set_fd_handler (pfds[i].fd, NULL, NULL, NULL);
}
qemu_free (pfds);
}
hlp->pfds = NULL;
hlp->count = 0;
hlp->handle = NULL;
}
static void alsa_anal_close1 (snd_pcm_t **handlep)
static void alsa_anal_close (snd_pcm_t **handlep)
{
int err = snd_pcm_close (*handlep);
if (err) {
@@ -152,173 +119,12 @@ static void alsa_anal_close1 (snd_pcm_t **handlep)
*handlep = NULL;
}
static void alsa_anal_close (snd_pcm_t **handlep, struct pollhlp *hlp)
{
alsa_fini_poll (hlp);
alsa_anal_close1 (handlep);
}
static int alsa_recover (snd_pcm_t *handle)
{
int err = snd_pcm_prepare (handle);
if (err < 0) {
alsa_logerr (err, "Failed to prepare handle %p\n", handle);
return -1;
}
return 0;
}
static int alsa_resume (snd_pcm_t *handle)
{
int err = snd_pcm_resume (handle);
if (err < 0) {
alsa_logerr (err, "Failed to resume handle %p\n", handle);
return -1;
}
return 0;
}
static void alsa_poll_handler (void *opaque)
{
int err, count;
snd_pcm_state_t state;
struct pollhlp *hlp = opaque;
unsigned short revents;
count = poll (hlp->pfds, hlp->count, 0);
if (count < 0) {
dolog ("alsa_poll_handler: poll %s\n", strerror (errno));
return;
}
if (!count) {
return;
}
/* XXX: ALSA example uses initial count, not the one returned by
poll, correct? */
err = snd_pcm_poll_descriptors_revents (hlp->handle, hlp->pfds,
hlp->count, &revents);
if (err < 0) {
alsa_logerr (err, "snd_pcm_poll_descriptors_revents");
return;
}
if (!(revents & hlp->mask)) {
if (conf.verbose) {
dolog ("revents = %d\n", revents);
}
return;
}
state = snd_pcm_state (hlp->handle);
switch (state) {
case SND_PCM_STATE_SETUP:
alsa_recover (hlp->handle);
break;
case SND_PCM_STATE_XRUN:
alsa_recover (hlp->handle);
break;
case SND_PCM_STATE_SUSPENDED:
alsa_resume (hlp->handle);
break;
case SND_PCM_STATE_PREPARED:
audio_run ("alsa run (prepared)");
break;
case SND_PCM_STATE_RUNNING:
audio_run ("alsa run (running)");
break;
default:
dolog ("Unexpected state %d\n", state);
}
}
static int alsa_poll_helper (snd_pcm_t *handle, struct pollhlp *hlp, int mask)
{
int i, count, err;
struct pollfd *pfds;
count = snd_pcm_poll_descriptors_count (handle);
if (count <= 0) {
dolog ("Could not initialize poll mode\n"
"Invalid number of poll descriptors %d\n", count);
return -1;
}
pfds = audio_calloc ("alsa_poll_helper", count, sizeof (*pfds));
if (!pfds) {
dolog ("Could not initialize poll mode\n");
return -1;
}
err = snd_pcm_poll_descriptors (handle, pfds, count);
if (err < 0) {
alsa_logerr (err, "Could not initialize poll mode\n"
"Could not obtain poll descriptors\n");
qemu_free (pfds);
return -1;
}
for (i = 0; i < count; ++i) {
if (pfds[i].events & POLLIN) {
err = qemu_set_fd_handler (pfds[i].fd, alsa_poll_handler,
NULL, hlp);
}
if (pfds[i].events & POLLOUT) {
if (conf.verbose) {
dolog ("POLLOUT %d %d\n", i, pfds[i].fd);
}
err = qemu_set_fd_handler (pfds[i].fd, NULL,
alsa_poll_handler, hlp);
}
if (conf.verbose) {
dolog ("Set handler events=%#x index=%d fd=%d err=%d\n",
pfds[i].events, i, pfds[i].fd, err);
}
if (err) {
dolog ("Failed to set handler events=%#x index=%d fd=%d err=%d\n",
pfds[i].events, i, pfds[i].fd, err);
while (i--) {
qemu_set_fd_handler (pfds[i].fd, NULL, NULL, NULL);
}
qemu_free (pfds);
return -1;
}
}
hlp->pfds = pfds;
hlp->count = count;
hlp->handle = handle;
hlp->mask = mask;
return 0;
}
static int alsa_poll_out (HWVoiceOut *hw)
{
ALSAVoiceOut *alsa = (ALSAVoiceOut *) hw;
return alsa_poll_helper (alsa->handle, &alsa->pollhlp, POLLOUT);
}
static int alsa_poll_in (HWVoiceIn *hw)
{
ALSAVoiceIn *alsa = (ALSAVoiceIn *) hw;
return alsa_poll_helper (alsa->handle, &alsa->pollhlp, POLLIN);
}
static int alsa_write (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write (sw, buf, len);
}
static snd_pcm_format_t aud_to_alsafmt (audfmt_e fmt, int endianness)
static snd_pcm_format_t aud_to_alsafmt (audfmt_e fmt)
{
switch (fmt) {
case AUD_FMT_S8:
@@ -328,36 +134,16 @@ static snd_pcm_format_t aud_to_alsafmt (audfmt_e fmt, int endianness)
return SND_PCM_FORMAT_U8;
case AUD_FMT_S16:
if (endianness) {
return SND_PCM_FORMAT_S16_BE;
}
else {
return SND_PCM_FORMAT_S16_LE;
}
return SND_PCM_FORMAT_S16_LE;
case AUD_FMT_U16:
if (endianness) {
return SND_PCM_FORMAT_U16_BE;
}
else {
return SND_PCM_FORMAT_U16_LE;
}
return SND_PCM_FORMAT_U16_LE;
case AUD_FMT_S32:
if (endianness) {
return SND_PCM_FORMAT_S32_BE;
}
else {
return SND_PCM_FORMAT_S32_LE;
}
return SND_PCM_FORMAT_S32_LE;
case AUD_FMT_U32:
if (endianness) {
return SND_PCM_FORMAT_U32_BE;
}
else {
return SND_PCM_FORMAT_U32_LE;
}
return SND_PCM_FORMAT_U32_LE;
default:
dolog ("Internal logic error: Bad audio format %d\n", fmt);
@@ -431,11 +217,10 @@ static int alsa_to_audfmt (snd_pcm_format_t alsafmt, audfmt_e *fmt,
}
static void alsa_dump_info (struct alsa_params_req *req,
struct alsa_params_obt *obt,
snd_pcm_format_t obtfmt)
struct alsa_params_obt *obt)
{
dolog ("parameter | requested value | obtained value\n");
dolog ("format | %10d | %10d\n", req->fmt, obtfmt);
dolog ("format | %10d | %10d\n", req->fmt, obt->fmt);
dolog ("channels | %10d | %10d\n",
req->nchannels, obt->nchannels);
dolog ("frequency | %10d | %10d\n", req->freq, obt->freq);
@@ -620,7 +405,7 @@ static int alsa_open (int in, struct alsa_params_req *req,
goto err;
}
if (((req->override_mask & 1) && (obt - req->period_size)))
if ((req->override_mask & 1) && (obt - req->period_size))
dolog ("Requested period %s %u was rejected, using %lu\n",
size_in_usec ? "time" : "size", req->period_size, obt);
}
@@ -687,23 +472,33 @@ static int alsa_open (int in, struct alsa_params_req *req,
*handlep = handle;
if (conf.verbose &&
(obtfmt != req->fmt ||
(obt->fmt != req->fmt ||
obt->nchannels != req->nchannels ||
obt->freq != req->freq)) {
dolog ("Audio parameters for %s\n", typ);
alsa_dump_info (req, obt, obtfmt);
dolog ("Audio paramters for %s\n", typ);
alsa_dump_info (req, obt);
}
#ifdef DEBUG
alsa_dump_info (req, obt, obtfmt);
alsa_dump_info (req, obt);
#endif
return 0;
err:
alsa_anal_close1 (&handle);
alsa_anal_close (&handle);
return -1;
}
static int alsa_recover (snd_pcm_t *handle)
{
int err = snd_pcm_prepare (handle);
if (err < 0) {
alsa_logerr (err, "Failed to prepare handle %p\n", handle);
return -1;
}
return 0;
}
static snd_pcm_sframes_t alsa_get_avail (snd_pcm_t *handle)
{
snd_pcm_sframes_t avail;
@@ -726,75 +521,20 @@ static snd_pcm_sframes_t alsa_get_avail (snd_pcm_t *handle)
return avail;
}
static void alsa_write_pending (ALSAVoiceOut *alsa)
{
HWVoiceOut *hw = &alsa->hw;
while (alsa->pending) {
int left_till_end_samples = hw->samples - alsa->wpos;
int len = audio_MIN (alsa->pending, left_till_end_samples);
char *src = advance (alsa->pcm_buf, alsa->wpos << hw->info.shift);
while (len) {
snd_pcm_sframes_t written;
written = snd_pcm_writei (alsa->handle, src, len);
if (written <= 0) {
switch (written) {
case 0:
if (conf.verbose) {
dolog ("Failed to write %d frames (wrote zero)\n", len);
}
return;
case -EPIPE:
if (alsa_recover (alsa->handle)) {
alsa_logerr (written, "Failed to write %d frames\n",
len);
return;
}
if (conf.verbose) {
dolog ("Recovering from playback xrun\n");
}
continue;
case -ESTRPIPE:
/* stream is suspended and waiting for an
application recovery */
if (alsa_resume (alsa->handle)) {
alsa_logerr (written, "Failed to write %d frames\n",
len);
return;
}
if (conf.verbose) {
dolog ("Resuming suspended output stream\n");
}
continue;
case -EAGAIN:
return;
default:
alsa_logerr (written, "Failed to write %d frames from %p\n",
len, src);
return;
}
}
alsa->wpos = (alsa->wpos + written) % hw->samples;
alsa->pending -= written;
len -= written;
}
}
}
static int alsa_run_out (HWVoiceOut *hw, int live)
static int alsa_run_out (HWVoiceOut *hw)
{
ALSAVoiceOut *alsa = (ALSAVoiceOut *) hw;
int decr;
int rpos, live, decr;
int samples;
uint8_t *dst;
struct st_sample *src;
snd_pcm_sframes_t avail;
live = audio_pcm_hw_get_live_out (hw);
if (!live) {
return 0;
}
avail = alsa_get_avail (alsa->handle);
if (avail < 0) {
dolog ("Could not get number of available playback frames\n");
@@ -802,9 +542,60 @@ static int alsa_run_out (HWVoiceOut *hw, int live)
}
decr = audio_MIN (live, avail);
decr = audio_pcm_hw_clip_out (hw, alsa->pcm_buf, decr, alsa->pending);
alsa->pending += decr;
alsa_write_pending (alsa);
samples = decr;
rpos = hw->rpos;
while (samples) {
int left_till_end_samples = hw->samples - rpos;
int len = audio_MIN (samples, left_till_end_samples);
snd_pcm_sframes_t written;
src = hw->mix_buf + rpos;
dst = advance (alsa->pcm_buf, rpos << hw->info.shift);
hw->clip (dst, src, len);
while (len) {
written = snd_pcm_writei (alsa->handle, dst, len);
if (written <= 0) {
switch (written) {
case 0:
if (conf.verbose) {
dolog ("Failed to write %d frames (wrote zero)\n", len);
}
goto exit;
case -EPIPE:
if (alsa_recover (alsa->handle)) {
alsa_logerr (written, "Failed to write %d frames\n",
len);
goto exit;
}
if (conf.verbose) {
dolog ("Recovering from playback xrun\n");
}
continue;
case -EAGAIN:
goto exit;
default:
alsa_logerr (written, "Failed to write %d frames to %p\n",
len, dst);
goto exit;
}
}
rpos = (rpos + written) % hw->samples;
samples -= written;
len -= written;
dst = advance (dst, written << hw->info.shift);
src += written;
}
}
exit:
hw->rpos = rpos;
return decr;
}
@@ -813,7 +604,7 @@ static void alsa_fini_out (HWVoiceOut *hw)
ALSAVoiceOut *alsa = (ALSAVoiceOut *) hw;
ldebug ("alsa_fini\n");
alsa_anal_close (&alsa->handle, &alsa->pollhlp);
alsa_anal_close (&alsa->handle);
if (alsa->pcm_buf) {
qemu_free (alsa->pcm_buf);
@@ -829,15 +620,14 @@ static int alsa_init_out (HWVoiceOut *hw, struct audsettings *as)
snd_pcm_t *handle;
struct audsettings obt_as;
req.fmt = aud_to_alsafmt (as->fmt, as->endianness);
req.fmt = aud_to_alsafmt (as->fmt);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.period_size = conf.period_size_out;
req.buffer_size = conf.buffer_size_out;
req.size_in_usec = conf.size_in_usec_out;
req.override_mask =
(conf.period_size_out_overridden ? 1 : 0) |
(conf.buffer_size_out_overridden ? 2 : 0);
req.override_mask = !!conf.period_size_out_overridden
| (!!conf.buffer_size_out_overridden << 1);
if (alsa_open (0, &req, &obt, &handle)) {
return -1;
@@ -855,7 +645,7 @@ static int alsa_init_out (HWVoiceOut *hw, struct audsettings *as)
if (!alsa->pcm_buf) {
dolog ("Could not allocate DAC buffer (%d samples, each %d bytes)\n",
hw->samples, 1 << hw->info.shift);
alsa_anal_close1 (&handle);
alsa_anal_close (&handle);
return -1;
}
@@ -863,15 +653,11 @@ static int alsa_init_out (HWVoiceOut *hw, struct audsettings *as)
return 0;
}
#define VOICE_CTL_PAUSE 0
#define VOICE_CTL_PREPARE 1
#define VOICE_CTL_START 2
static int alsa_voice_ctl (snd_pcm_t *handle, const char *typ, int ctl)
static int alsa_voice_ctl (snd_pcm_t *handle, const char *typ, int pause)
{
int err;
if (ctl == VOICE_CTL_PAUSE) {
if (pause) {
err = snd_pcm_drop (handle);
if (err < 0) {
alsa_logerr (err, "Could not stop %s\n", typ);
@@ -884,13 +670,6 @@ static int alsa_voice_ctl (snd_pcm_t *handle, const char *typ, int ctl)
alsa_logerr (err, "Could not prepare handle for %s\n", typ);
return -1;
}
if (ctl == VOICE_CTL_START) {
err = snd_pcm_start(handle);
if (err < 0) {
alsa_logerr (err, "Could not start handle for %s\n", typ);
return -1;
}
}
}
return 0;
@@ -902,29 +681,12 @@ static int alsa_ctl_out (HWVoiceOut *hw, int cmd, ...)
switch (cmd) {
case VOICE_ENABLE:
{
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
ldebug ("enabling voice\n");
if (poll_mode && alsa_poll_out (hw)) {
poll_mode = 0;
}
hw->poll_mode = poll_mode;
return alsa_voice_ctl (alsa->handle, "playback", VOICE_CTL_PREPARE);
}
ldebug ("enabling voice\n");
return alsa_voice_ctl (alsa->handle, "playback", 0);
case VOICE_DISABLE:
ldebug ("disabling voice\n");
if (hw->poll_mode) {
hw->poll_mode = 0;
alsa_fini_poll (&alsa->pollhlp);
}
return alsa_voice_ctl (alsa->handle, "playback", VOICE_CTL_PAUSE);
return alsa_voice_ctl (alsa->handle, "playback", 1);
}
return -1;
@@ -938,15 +700,14 @@ static int alsa_init_in (HWVoiceIn *hw, struct audsettings *as)
snd_pcm_t *handle;
struct audsettings obt_as;
req.fmt = aud_to_alsafmt (as->fmt, as->endianness);
req.fmt = aud_to_alsafmt (as->fmt);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.period_size = conf.period_size_in;
req.buffer_size = conf.buffer_size_in;
req.size_in_usec = conf.size_in_usec_in;
req.override_mask =
(conf.period_size_in_overridden ? 1 : 0) |
(conf.buffer_size_in_overridden ? 2 : 0);
req.override_mask = !!conf.period_size_in_overridden
| (!!conf.buffer_size_in_overridden << 1);
if (alsa_open (1, &req, &obt, &handle)) {
return -1;
@@ -964,7 +725,7 @@ static int alsa_init_in (HWVoiceIn *hw, struct audsettings *as)
if (!alsa->pcm_buf) {
dolog ("Could not allocate ADC buffer (%d samples, each %d bytes)\n",
hw->samples, 1 << hw->info.shift);
alsa_anal_close1 (&handle);
alsa_anal_close (&handle);
return -1;
}
@@ -976,7 +737,7 @@ static void alsa_fini_in (HWVoiceIn *hw)
{
ALSAVoiceIn *alsa = (ALSAVoiceIn *) hw;
alsa_anal_close (&alsa->handle, &alsa->pollhlp);
alsa_anal_close (&alsa->handle);
if (alsa->pcm_buf) {
qemu_free (alsa->pcm_buf);
@@ -996,8 +757,8 @@ static int alsa_run_in (HWVoiceIn *hw)
int add;
int len;
} bufs[2] = {
{ .add = hw->wpos, .len = 0 },
{ .add = 0, .len = 0 }
{ hw->wpos, 0 },
{ 0, 0 }
};
snd_pcm_sframes_t avail;
snd_pcm_uframes_t read_samples = 0;
@@ -1012,30 +773,8 @@ static int alsa_run_in (HWVoiceIn *hw)
return 0;
}
if (!avail) {
snd_pcm_state_t state;
state = snd_pcm_state (alsa->handle);
switch (state) {
case SND_PCM_STATE_PREPARED:
avail = hw->samples;
break;
case SND_PCM_STATE_SUSPENDED:
/* stream is suspended and waiting for an application recovery */
if (alsa_resume (alsa->handle)) {
dolog ("Failed to resume suspended input stream\n");
return 0;
}
if (conf.verbose) {
dolog ("Resuming suspended input stream\n");
}
break;
default:
if (conf.verbose) {
dolog ("No frames available and ALSA state is %d\n", state);
}
return 0;
}
if (!avail && (snd_pcm_state (alsa->handle) == SND_PCM_STATE_PREPARED)) {
avail = hw->samples;
}
decr = audio_MIN (dead, avail);
@@ -1097,7 +836,7 @@ static int alsa_run_in (HWVoiceIn *hw)
}
}
hw->conv (dst, src, nread);
hw->conv (dst, src, nread, &nominal_volume);
src = advance (src, nread << hwshift);
dst += nread;
@@ -1123,30 +862,12 @@ static int alsa_ctl_in (HWVoiceIn *hw, int cmd, ...)
switch (cmd) {
case VOICE_ENABLE:
{
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
ldebug ("enabling voice\n");
if (poll_mode && alsa_poll_in (hw)) {
poll_mode = 0;
}
hw->poll_mode = poll_mode;
return alsa_voice_ctl (alsa->handle, "capture", VOICE_CTL_START);
}
ldebug ("enabling voice\n");
return alsa_voice_ctl (alsa->handle, "capture", 0);
case VOICE_DISABLE:
ldebug ("disabling voice\n");
if (hw->poll_mode) {
hw->poll_mode = 0;
alsa_fini_poll (&alsa->pollhlp);
}
return alsa_voice_ctl (alsa->handle, "capture", VOICE_CTL_PAUSE);
return alsa_voice_ctl (alsa->handle, "capture", 1);
}
return -1;
@@ -1163,98 +884,63 @@ static void alsa_audio_fini (void *opaque)
}
static struct audio_option alsa_options[] = {
{
.name = "DAC_SIZE_IN_USEC",
.tag = AUD_OPT_BOOL,
.valp = &conf.size_in_usec_out,
.descr = "DAC period/buffer size in microseconds (otherwise in frames)"
},
{
.name = "DAC_PERIOD_SIZE",
.tag = AUD_OPT_INT,
.valp = &conf.period_size_out,
.descr = "DAC period size (0 to go with system default)",
.overriddenp = &conf.period_size_out_overridden
},
{
.name = "DAC_BUFFER_SIZE",
.tag = AUD_OPT_INT,
.valp = &conf.buffer_size_out,
.descr = "DAC buffer size (0 to go with system default)",
.overriddenp = &conf.buffer_size_out_overridden
},
{
.name = "ADC_SIZE_IN_USEC",
.tag = AUD_OPT_BOOL,
.valp = &conf.size_in_usec_in,
.descr =
"ADC period/buffer size in microseconds (otherwise in frames)"
},
{
.name = "ADC_PERIOD_SIZE",
.tag = AUD_OPT_INT,
.valp = &conf.period_size_in,
.descr = "ADC period size (0 to go with system default)",
.overriddenp = &conf.period_size_in_overridden
},
{
.name = "ADC_BUFFER_SIZE",
.tag = AUD_OPT_INT,
.valp = &conf.buffer_size_in,
.descr = "ADC buffer size (0 to go with system default)",
.overriddenp = &conf.buffer_size_in_overridden
},
{
.name = "THRESHOLD",
.tag = AUD_OPT_INT,
.valp = &conf.threshold,
.descr = "(undocumented)"
},
{
.name = "DAC_DEV",
.tag = AUD_OPT_STR,
.valp = &conf.pcm_name_out,
.descr = "DAC device name (for instance dmix)"
},
{
.name = "ADC_DEV",
.tag = AUD_OPT_STR,
.valp = &conf.pcm_name_in,
.descr = "ADC device name"
},
{
.name = "VERBOSE",
.tag = AUD_OPT_BOOL,
.valp = &conf.verbose,
.descr = "Behave in a more verbose way"
},
{ /* End of list */ }
{"DAC_SIZE_IN_USEC", AUD_OPT_BOOL, &conf.size_in_usec_out,
"DAC period/buffer size in microseconds (otherwise in frames)", NULL, 0},
{"DAC_PERIOD_SIZE", AUD_OPT_INT, &conf.period_size_out,
"DAC period size (0 to go with system default)",
&conf.period_size_out_overridden, 0},
{"DAC_BUFFER_SIZE", AUD_OPT_INT, &conf.buffer_size_out,
"DAC buffer size (0 to go with system default)",
&conf.buffer_size_out_overridden, 0},
{"ADC_SIZE_IN_USEC", AUD_OPT_BOOL, &conf.size_in_usec_in,
"ADC period/buffer size in microseconds (otherwise in frames)", NULL, 0},
{"ADC_PERIOD_SIZE", AUD_OPT_INT, &conf.period_size_in,
"ADC period size (0 to go with system default)",
&conf.period_size_in_overridden, 0},
{"ADC_BUFFER_SIZE", AUD_OPT_INT, &conf.buffer_size_in,
"ADC buffer size (0 to go with system default)",
&conf.buffer_size_in_overridden, 0},
{"THRESHOLD", AUD_OPT_INT, &conf.threshold,
"(undocumented)", NULL, 0},
{"DAC_DEV", AUD_OPT_STR, &conf.pcm_name_out,
"DAC device name (for instance dmix)", NULL, 0},
{"ADC_DEV", AUD_OPT_STR, &conf.pcm_name_in,
"ADC device name", NULL, 0},
{"VERBOSE", AUD_OPT_BOOL, &conf.verbose,
"Behave in a more verbose way", NULL, 0},
{NULL, 0, NULL, NULL, NULL, 0}
};
static struct audio_pcm_ops alsa_pcm_ops = {
.init_out = alsa_init_out,
.fini_out = alsa_fini_out,
.run_out = alsa_run_out,
.write = alsa_write,
.ctl_out = alsa_ctl_out,
alsa_init_out,
alsa_fini_out,
alsa_run_out,
alsa_write,
alsa_ctl_out,
.init_in = alsa_init_in,
.fini_in = alsa_fini_in,
.run_in = alsa_run_in,
.read = alsa_read,
.ctl_in = alsa_ctl_in,
alsa_init_in,
alsa_fini_in,
alsa_run_in,
alsa_read,
alsa_ctl_in
};
struct audio_driver alsa_audio_driver = {
.name = "alsa",
.descr = "ALSA http://www.alsa-project.org",
.options = alsa_options,
.init = alsa_audio_init,
.fini = alsa_audio_fini,
.pcm_ops = &alsa_pcm_ops,
.can_be_default = 1,
.max_voices_out = INT_MAX,
.max_voices_in = INT_MAX,
.voice_size_out = sizeof (ALSAVoiceOut),
.voice_size_in = sizeof (ALSAVoiceIn)
INIT_FIELD (name = ) "alsa",
INIT_FIELD (descr = ) "ALSA http://www.alsa-project.org",
INIT_FIELD (options = ) alsa_options,
INIT_FIELD (init = ) alsa_audio_init,
INIT_FIELD (fini = ) alsa_audio_fini,
INIT_FIELD (pcm_ops = ) &alsa_pcm_ops,
INIT_FIELD (can_be_default = ) 1,
INIT_FIELD (max_voices_out = ) INT_MAX,
INIT_FIELD (max_voices_in = ) INT_MAX,
INIT_FIELD (voice_size_out = ) sizeof (ALSAVoiceOut),
INIT_FIELD (voice_size_in = ) sizeof (ALSAVoiceIn)
};

View File

@@ -23,7 +23,7 @@
*/
#include "hw/hw.h"
#include "audio.h"
#include "monitor.h"
#include "console.h"
#include "qemu-timer.h"
#include "sysemu.h"
@@ -34,20 +34,11 @@
/* #define DEBUG_LIVE */
/* #define DEBUG_OUT */
/* #define DEBUG_CAPTURE */
/* #define DEBUG_POLL */
#define SW_NAME(sw) (sw)->name ? (sw)->name : "unknown"
/* Order of CONFIG_AUDIO_DRIVERS is import.
The 1st one is the one used by default, that is the reason
that we generate the list.
*/
static struct audio_driver *drvtab[] = {
#ifdef CONFIG_SPICE
&spice_audio_driver,
#endif
CONFIG_AUDIO_DRIVERS
AUDIO_DRIVERS
&no_audio_driver,
&wav_audio_driver
};
@@ -68,59 +59,69 @@ static struct {
} period;
int plive;
int log_to_monitor;
int try_poll_in;
int try_poll_out;
} conf = {
.fixed_out = { /* DAC fixed settings */
.enabled = 1,
.nb_voices = 1,
.greedy = 1,
.settings = {
.freq = 44100,
.nchannels = 2,
.fmt = AUD_FMT_S16,
.endianness = AUDIO_HOST_ENDIANNESS,
{ /* DAC fixed settings */
1, /* enabled */
1, /* nb_voices */
1, /* greedy */
{
44100, /* freq */
2, /* nchannels */
AUD_FMT_S16, /* fmt */
AUDIO_HOST_ENDIANNESS
}
},
.fixed_in = { /* ADC fixed settings */
.enabled = 1,
.nb_voices = 1,
.greedy = 1,
.settings = {
.freq = 44100,
.nchannels = 2,
.fmt = AUD_FMT_S16,
.endianness = AUDIO_HOST_ENDIANNESS,
{ /* ADC fixed settings */
1, /* enabled */
1, /* nb_voices */
1, /* greedy */
{
44100, /* freq */
2, /* nchannels */
AUD_FMT_S16, /* fmt */
AUDIO_HOST_ENDIANNESS
}
},
.period = { .hertz = 250 },
.plive = 0,
.log_to_monitor = 0,
.try_poll_in = 1,
.try_poll_out = 1,
{ 250 }, /* period */
0, /* plive */
0 /* log_to_monitor */
};
static AudioState glob_audio_state;
const struct mixeng_volume nominal_volume = {
.mute = 0,
struct mixeng_volume nominal_volume = {
0,
#ifdef FLOAT_MIXENG
.r = 1.0,
.l = 1.0,
1.0,
1.0
#else
.r = 1ULL << 32,
.l = 1ULL << 32,
1ULL << 32,
1ULL << 32
#endif
};
/* http://www.df.lth.se/~john_e/gems/gem002d.html */
/* http://www.multi-platforms.com/Tips/PopCount.htm */
uint32_t popcount (uint32_t u)
{
u = ((u&0x55555555) + ((u>>1)&0x55555555));
u = ((u&0x33333333) + ((u>>2)&0x33333333));
u = ((u&0x0f0f0f0f) + ((u>>4)&0x0f0f0f0f));
u = ((u&0x00ff00ff) + ((u>>8)&0x00ff00ff));
u = ( u&0x0000ffff) + (u>>16);
return u;
}
inline uint32_t lsbindex (uint32_t u)
{
return popcount ((u&-u)-1);
}
#ifdef AUDIO_IS_FLAWLESS_AND_NO_CHECKS_ARE_REQURIED
#error No its not
#else
static void audio_print_options (const char *prefix,
struct audio_option *opt);
int audio_bug (const char *funcname, int cond)
{
if (cond) {
@@ -128,16 +129,10 @@ int audio_bug (const char *funcname, int cond)
AUD_log (NULL, "A bug was just triggered in %s\n", funcname);
if (!shown) {
struct audio_driver *d;
shown = 1;
AUD_log (NULL, "Save all your work and restart without audio\n");
AUD_log (NULL, "Please send bug report to av1474@comtv.ru\n");
AUD_log (NULL, "Please send bug report to malc@pulsesoft.com\n");
AUD_log (NULL, "I am sorry\n");
d = glob_audio_state.drv;
if (d) {
audio_print_options (d->name, d->options);
}
}
AUD_log (NULL, "Context:\n");
@@ -333,10 +328,10 @@ void AUD_vlog (const char *cap, const char *fmt, va_list ap)
{
if (conf.log_to_monitor) {
if (cap) {
monitor_printf(default_mon, "%s: ", cap);
term_printf ("%s: ", cap);
}
monitor_vprintf(default_mon, fmt, ap);
term_vprintf (fmt, ap);
}
else {
if (cap) {
@@ -702,19 +697,21 @@ void audio_pcm_info_clear_buf (struct audio_pcm_info *info, void *buf, int len)
/*
* Capture
*/
static void noop_conv (struct st_sample *dst, const void *src, int samples)
static void noop_conv (struct st_sample *dst, const void *src,
int samples, struct mixeng_volume *vol)
{
(void) src;
(void) dst;
(void) samples;
(void) vol;
}
static CaptureVoiceOut *audio_pcm_capture_find_specific (
AudioState *s,
struct audsettings *as
)
{
CaptureVoiceOut *cap;
AudioState *s = &glob_audio_state;
for (cap = s->cap_head.lh_first; cap; cap = cap->entries.le_next) {
if (audio_pcm_info_eq (&cap->hw.info, as)) {
@@ -776,8 +773,8 @@ static void audio_detach_capture (HWVoiceOut *hw)
sw->rate = NULL;
}
QLIST_REMOVE (sw, entries);
QLIST_REMOVE (sc, entries);
LIST_REMOVE (sw, entries);
LIST_REMOVE (sc, entries);
qemu_free (sc);
if (was_active) {
/* We have removed soft voice from the capture:
@@ -789,9 +786,8 @@ static void audio_detach_capture (HWVoiceOut *hw)
}
}
static int audio_attach_capture (HWVoiceOut *hw)
static int audio_attach_capture (AudioState *s, HWVoiceOut *hw)
{
AudioState *s = &glob_audio_state;
CaptureVoiceOut *cap;
audio_detach_capture (hw);
@@ -821,8 +817,8 @@ static int audio_attach_capture (HWVoiceOut *hw)
qemu_free (sw);
return -1;
}
QLIST_INSERT_HEAD (&hw_cap->sw_head, sw, entries);
QLIST_INSERT_HEAD (&hw->cap_head, sc, entries);
LIST_INSERT_HEAD (&hw_cap->sw_head, sw, entries);
LIST_INSERT_HEAD (&hw->cap_head, sc, entries);
#ifdef DEBUG_CAPTURE
asprintf (&sw->name, "for %p %d,%d,%d",
hw, sw->info.freq, sw->info.bits, sw->info.nchannels);
@@ -861,28 +857,6 @@ int audio_pcm_hw_get_live_in (HWVoiceIn *hw)
return live;
}
int audio_pcm_hw_clip_out (HWVoiceOut *hw, void *pcm_buf,
int live, int pending)
{
int left = hw->samples - pending;
int len = audio_MIN (left, live);
int clipped = 0;
while (len) {
struct st_sample *src = hw->mix_buf + hw->rpos;
uint8_t *dst = advance (pcm_buf, hw->rpos << hw->info.shift);
int samples_till_end_of_buf = hw->samples - hw->rpos;
int samples_to_clip = audio_MIN (len, samples_till_end_of_buf);
hw->clip (dst, src, samples_to_clip);
hw->rpos = (hw->rpos + samples_to_clip) % hw->samples;
len -= samples_to_clip;
clipped += samples_to_clip;
}
return clipped;
}
/*
* Soft voice (capture)
*/
@@ -954,8 +928,6 @@ int audio_pcm_sw_read (SWVoiceIn *sw, void *buf, int size)
total += isamp;
}
mixeng_volume (sw->buf, ret, &sw->vol);
sw->clip (buf, sw->buf, ret);
sw->total_hw_samples_acquired += total;
return ret << sw->info.shift;
@@ -981,17 +953,16 @@ static int audio_pcm_hw_find_min_out (HWVoiceOut *hw, int *nb_livep)
return m;
}
static int audio_pcm_hw_get_live_out (HWVoiceOut *hw, int *nb_live)
int audio_pcm_hw_get_live_out2 (HWVoiceOut *hw, int *nb_live)
{
int smin;
int nb_live1;
smin = audio_pcm_hw_find_min_out (hw, &nb_live1);
if (nb_live) {
*nb_live = nb_live1;
smin = audio_pcm_hw_find_min_out (hw, nb_live);
if (!*nb_live) {
return 0;
}
if (nb_live1) {
else {
int live = smin;
if (audio_bug (AUDIO_FUNC, live < 0 || live > hw->samples)) {
@@ -1000,7 +971,19 @@ static int audio_pcm_hw_get_live_out (HWVoiceOut *hw, int *nb_live)
}
return live;
}
return 0;
}
int audio_pcm_hw_get_live_out (HWVoiceOut *hw)
{
int nb_live;
int live;
live = audio_pcm_hw_get_live_out2 (hw, &nb_live);
if (audio_bug (AUDIO_FUNC, live < 0 || live > hw->samples)) {
dolog ("live=%d hw->samples=%d\n", live, hw->samples);
return 0;
}
return live;
}
/*
@@ -1037,8 +1020,7 @@ int audio_pcm_sw_write (SWVoiceOut *sw, void *buf, int size)
swlim = ((int64_t) dead << 32) / sw->ratio;
swlim = audio_MIN (swlim, samples);
if (swlim) {
sw->conv (sw->buf, buf, swlim);
mixeng_volume (sw->buf, swlim, &sw->vol);
sw->conv (sw->buf, buf, swlim, &sw->vol);
}
while (swlim) {
@@ -1094,42 +1076,6 @@ static void audio_pcm_print_info (const char *cap, struct audio_pcm_info *info)
#undef DAC
#include "audio_template.h"
/*
* Timer
*/
static int audio_is_timer_needed (void)
{
HWVoiceIn *hwi = NULL;
HWVoiceOut *hwo = NULL;
while ((hwo = audio_pcm_hw_find_any_enabled_out (hwo))) {
if (!hwo->poll_mode) return 1;
}
while ((hwi = audio_pcm_hw_find_any_enabled_in (hwi))) {
if (!hwi->poll_mode) return 1;
}
return 0;
}
static void audio_reset_timer (AudioState *s)
{
if (audio_is_timer_needed ()) {
qemu_mod_timer (s->ts, qemu_get_clock (vm_clock) + 1);
}
else {
qemu_del_timer (s->ts);
}
}
static void audio_timer (void *opaque)
{
audio_run ("timer");
audio_reset_timer (opaque);
}
/*
* Public API
*/
int AUD_write (SWVoiceOut *sw, void *buf, int size)
{
int bytes;
@@ -1190,8 +1136,7 @@ void AUD_set_active_out (SWVoiceOut *sw, int on)
if (!hw->enabled) {
hw->enabled = 1;
if (s->vm_running) {
hw->pcm_ops->ctl_out (hw, VOICE_ENABLE, conf.try_poll_out);
audio_reset_timer (s);
hw->pcm_ops->ctl_out (hw, VOICE_ENABLE);
}
}
}
@@ -1235,8 +1180,7 @@ void AUD_set_active_in (SWVoiceIn *sw, int on)
if (!hw->enabled) {
hw->enabled = 1;
if (s->vm_running) {
hw->pcm_ops->ctl_in (hw, VOICE_ENABLE, conf.try_poll_in);
audio_reset_timer (s);
hw->pcm_ops->ctl_in (hw, VOICE_ENABLE);
}
}
sw->total_hw_samples_acquired = hw->total_samples_captured;
@@ -1351,11 +1295,11 @@ static void audio_run_out (AudioState *s)
HWVoiceOut *hw = NULL;
SWVoiceOut *sw;
while ((hw = audio_pcm_hw_find_any_enabled_out (hw))) {
while ((hw = audio_pcm_hw_find_any_enabled_out (s, hw))) {
int played;
int live, free, nb_live, cleanup_required, prev_rpos;
live = audio_pcm_hw_get_live_out (hw, &nb_live);
live = audio_pcm_hw_get_live_out2 (hw, &nb_live);
if (!nb_live) {
live = 0;
}
@@ -1393,7 +1337,7 @@ static void audio_run_out (AudioState *s)
}
prev_rpos = hw->rpos;
played = hw->pcm_ops->run_out (hw, live);
played = hw->pcm_ops->run_out (hw);
if (audio_bug (AUDIO_FUNC, hw->rpos >= hw->samples)) {
dolog ("hw->rpos=%d hw->samples=%d played=%d\n",
hw->rpos, hw->samples, played);
@@ -1446,7 +1390,7 @@ static void audio_run_out (AudioState *s)
#ifdef DEBUG_PLIVE
dolog ("Finishing with old voice\n");
#endif
audio_close_out (sw);
audio_close_out (s, sw);
}
sw = sw1;
}
@@ -1458,7 +1402,7 @@ static void audio_run_in (AudioState *s)
{
HWVoiceIn *hw = NULL;
while ((hw = audio_pcm_hw_find_any_enabled_in (hw))) {
while ((hw = audio_pcm_hw_find_any_enabled_in (s, hw))) {
SWVoiceIn *sw;
int captured, min;
@@ -1492,7 +1436,7 @@ static void audio_run_capture (AudioState *s)
HWVoiceOut *hw = &cap->hw;
SWVoiceOut *sw;
captured = live = audio_pcm_hw_get_live_out (hw, NULL);
captured = live = audio_pcm_hw_get_live_out (hw);
rpos = hw->rpos;
while (live) {
int left = hw->samples - rpos;
@@ -1530,126 +1474,61 @@ static void audio_run_capture (AudioState *s)
}
}
void audio_run (const char *msg)
static void audio_timer (void *opaque)
{
AudioState *s = &glob_audio_state;
AudioState *s = opaque;
audio_run_out (s);
audio_run_in (s);
audio_run_capture (s);
#ifdef DEBUG_POLL
{
static double prevtime;
double currtime;
struct timeval tv;
if (gettimeofday (&tv, NULL)) {
perror ("audio_run: gettimeofday");
return;
}
currtime = tv.tv_sec + tv.tv_usec * 1e-6;
dolog ("Elapsed since last %s: %f\n", msg, currtime - prevtime);
prevtime = currtime;
}
#endif
qemu_mod_timer (s->ts, qemu_get_clock (vm_clock) + conf.period.ticks);
}
static struct audio_option audio_options[] = {
/* DAC */
{
.name = "DAC_FIXED_SETTINGS",
.tag = AUD_OPT_BOOL,
.valp = &conf.fixed_out.enabled,
.descr = "Use fixed settings for host DAC"
},
{
.name = "DAC_FIXED_FREQ",
.tag = AUD_OPT_INT,
.valp = &conf.fixed_out.settings.freq,
.descr = "Frequency for fixed host DAC"
},
{
.name = "DAC_FIXED_FMT",
.tag = AUD_OPT_FMT,
.valp = &conf.fixed_out.settings.fmt,
.descr = "Format for fixed host DAC"
},
{
.name = "DAC_FIXED_CHANNELS",
.tag = AUD_OPT_INT,
.valp = &conf.fixed_out.settings.nchannels,
.descr = "Number of channels for fixed DAC (1 - mono, 2 - stereo)"
},
{
.name = "DAC_VOICES",
.tag = AUD_OPT_INT,
.valp = &conf.fixed_out.nb_voices,
.descr = "Number of voices for DAC"
},
{
.name = "DAC_TRY_POLL",
.tag = AUD_OPT_BOOL,
.valp = &conf.try_poll_out,
.descr = "Attempt using poll mode for DAC"
},
{"DAC_FIXED_SETTINGS", AUD_OPT_BOOL, &conf.fixed_out.enabled,
"Use fixed settings for host DAC", NULL, 0},
{"DAC_FIXED_FREQ", AUD_OPT_INT, &conf.fixed_out.settings.freq,
"Frequency for fixed host DAC", NULL, 0},
{"DAC_FIXED_FMT", AUD_OPT_FMT, &conf.fixed_out.settings.fmt,
"Format for fixed host DAC", NULL, 0},
{"DAC_FIXED_CHANNELS", AUD_OPT_INT, &conf.fixed_out.settings.nchannels,
"Number of channels for fixed DAC (1 - mono, 2 - stereo)", NULL, 0},
{"DAC_VOICES", AUD_OPT_INT, &conf.fixed_out.nb_voices,
"Number of voices for DAC", NULL, 0},
/* ADC */
{
.name = "ADC_FIXED_SETTINGS",
.tag = AUD_OPT_BOOL,
.valp = &conf.fixed_in.enabled,
.descr = "Use fixed settings for host ADC"
},
{
.name = "ADC_FIXED_FREQ",
.tag = AUD_OPT_INT,
.valp = &conf.fixed_in.settings.freq,
.descr = "Frequency for fixed host ADC"
},
{
.name = "ADC_FIXED_FMT",
.tag = AUD_OPT_FMT,
.valp = &conf.fixed_in.settings.fmt,
.descr = "Format for fixed host ADC"
},
{
.name = "ADC_FIXED_CHANNELS",
.tag = AUD_OPT_INT,
.valp = &conf.fixed_in.settings.nchannels,
.descr = "Number of channels for fixed ADC (1 - mono, 2 - stereo)"
},
{
.name = "ADC_VOICES",
.tag = AUD_OPT_INT,
.valp = &conf.fixed_in.nb_voices,
.descr = "Number of voices for ADC"
},
{
.name = "ADC_TRY_POLL",
.tag = AUD_OPT_BOOL,
.valp = &conf.try_poll_in,
.descr = "Attempt using poll mode for ADC"
},
{"ADC_FIXED_SETTINGS", AUD_OPT_BOOL, &conf.fixed_in.enabled,
"Use fixed settings for host ADC", NULL, 0},
{"ADC_FIXED_FREQ", AUD_OPT_INT, &conf.fixed_in.settings.freq,
"Frequency for fixed host ADC", NULL, 0},
{"ADC_FIXED_FMT", AUD_OPT_FMT, &conf.fixed_in.settings.fmt,
"Format for fixed host ADC", NULL, 0},
{"ADC_FIXED_CHANNELS", AUD_OPT_INT, &conf.fixed_in.settings.nchannels,
"Number of channels for fixed ADC (1 - mono, 2 - stereo)", NULL, 0},
{"ADC_VOICES", AUD_OPT_INT, &conf.fixed_in.nb_voices,
"Number of voices for ADC", NULL, 0},
/* Misc */
{
.name = "TIMER_PERIOD",
.tag = AUD_OPT_INT,
.valp = &conf.period.hertz,
.descr = "Timer period in HZ (0 - use lowest possible)"
},
{
.name = "PLIVE",
.tag = AUD_OPT_BOOL,
.valp = &conf.plive,
.descr = "(undocumented)"
},
{
.name = "LOG_TO_MONITOR",
.tag = AUD_OPT_BOOL,
.valp = &conf.log_to_monitor,
.descr = "Print logging messages to monitor instead of stderr"
},
{ /* End of list */ }
{"TIMER_PERIOD", AUD_OPT_INT, &conf.period.hertz,
"Timer period in HZ (0 - use lowest possible)", NULL, 0},
{"PLIVE", AUD_OPT_BOOL, &conf.plive,
"(undocumented)", NULL, 0},
{"LOG_TO_MONITOR", AUD_OPT_BOOL, &conf.log_to_monitor,
"print logging messages to monitor instead of stderr", NULL, 0},
{NULL, 0, NULL, NULL, NULL, 0}
};
static void audio_pp_nb_voices (const char *typ, int nb)
@@ -1731,8 +1610,8 @@ static int audio_driver_init (AudioState *s, struct audio_driver *drv)
s->drv_opaque = drv->init ();
if (s->drv_opaque) {
audio_init_nb_voices_out (drv);
audio_init_nb_voices_in (drv);
audio_init_nb_voices_out (s, drv);
audio_init_nb_voices_in (s, drv);
s->drv = drv;
return 0;
}
@@ -1751,14 +1630,13 @@ static void audio_vm_change_state_handler (void *opaque, int running,
int op = running ? VOICE_ENABLE : VOICE_DISABLE;
s->vm_running = running;
while ((hwo = audio_pcm_hw_find_any_enabled_out (hwo))) {
hwo->pcm_ops->ctl_out (hwo, op, conf.try_poll_out);
while ((hwo = audio_pcm_hw_find_any_enabled_out (s, hwo))) {
hwo->pcm_ops->ctl_out (hwo, op);
}
while ((hwi = audio_pcm_hw_find_any_enabled_in (hwi))) {
hwi->pcm_ops->ctl_in (hwi, op, conf.try_poll_in);
while ((hwi = audio_pcm_hw_find_any_enabled_in (s, hwi))) {
hwi->pcm_ops->ctl_in (hwi, op);
}
audio_reset_timer (s);
}
static void audio_atexit (void)
@@ -1767,7 +1645,7 @@ static void audio_atexit (void)
HWVoiceOut *hwo = NULL;
HWVoiceIn *hwi = NULL;
while ((hwo = audio_pcm_hw_find_any_enabled_out (hwo))) {
while ((hwo = audio_pcm_hw_find_any_enabled_out (s, hwo))) {
SWVoiceCap *sc;
hwo->pcm_ops->ctl_out (hwo, VOICE_DISABLE);
@@ -1783,7 +1661,7 @@ static void audio_atexit (void)
}
}
while ((hwi = audio_pcm_hw_find_any_enabled_in (hwi))) {
while ((hwi = audio_pcm_hw_find_any_enabled_in (s, hwi))) {
hwi->pcm_ops->ctl_in (hwi, VOICE_DISABLE);
hwi->pcm_ops->fini_in (hwi);
}
@@ -1793,36 +1671,55 @@ static void audio_atexit (void)
}
}
static const VMStateDescription vmstate_audio = {
.name = "audio",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField []) {
VMSTATE_END_OF_LIST()
}
};
static void audio_save (QEMUFile *f, void *opaque)
{
(void) f;
(void) opaque;
}
static void audio_init (void)
static int audio_load (QEMUFile *f, void *opaque, int version_id)
{
(void) f;
(void) opaque;
if (version_id != 1) {
return -EINVAL;
}
return 0;
}
void AUD_register_card (AudioState *s, const char *name, QEMUSoundCard *card)
{
card->audio = s;
card->name = qemu_strdup (name);
memset (&card->entries, 0, sizeof (card->entries));
LIST_INSERT_HEAD (&s->card_head, card, entries);
}
void AUD_remove_card (QEMUSoundCard *card)
{
LIST_REMOVE (card, entries);
card->audio = NULL;
qemu_free (card->name);
}
AudioState *AUD_init (void)
{
size_t i;
int done = 0;
const char *drvname;
VMChangeStateEntry *e;
AudioState *s = &glob_audio_state;
if (s->drv) {
return;
}
QLIST_INIT (&s->hw_head_out);
QLIST_INIT (&s->hw_head_in);
QLIST_INIT (&s->cap_head);
LIST_INIT (&s->hw_head_out);
LIST_INIT (&s->hw_head_in);
LIST_INIT (&s->cap_head);
atexit (audio_atexit);
s->ts = qemu_new_timer (vm_clock, audio_timer, s);
if (!s->ts) {
hw_error("Could not create audio timer\n");
dolog ("Could not create audio timer\n");
return NULL;
}
audio_process_options ("AUDIO", audio_options);
@@ -1875,60 +1772,60 @@ static void audio_init (void)
if (!done) {
done = !audio_driver_init (s, &no_audio_driver);
if (!done) {
hw_error("Could not initialize audio subsystem\n");
dolog ("Could not initialize audio subsystem\n");
}
else {
dolog ("warning: Using timer based audio emulation\n");
}
}
if (conf.period.hertz <= 0) {
if (conf.period.hertz < 0) {
dolog ("warning: Timer period is negative - %d "
"treating as zero\n",
conf.period.hertz);
if (done) {
VMChangeStateEntry *e;
if (conf.period.hertz <= 0) {
if (conf.period.hertz < 0) {
dolog ("warning: Timer period is negative - %d "
"treating as zero\n",
conf.period.hertz);
}
conf.period.ticks = 1;
}
conf.period.ticks = 1;
} else {
conf.period.ticks =
muldiv64 (1, get_ticks_per_sec (), conf.period.hertz);
else {
conf.period.ticks = ticks_per_sec / conf.period.hertz;
}
e = qemu_add_vm_change_state_handler (audio_vm_change_state_handler, s);
if (!e) {
dolog ("warning: Could not register change state handler\n"
"(Audio can continue looping even after stopping the VM)\n");
}
}
else {
qemu_del_timer (s->ts);
return NULL;
}
e = qemu_add_vm_change_state_handler (audio_vm_change_state_handler, s);
if (!e) {
dolog ("warning: Could not register change state handler\n"
"(Audio can continue looping even after stopping the VM)\n");
}
QLIST_INIT (&s->card_head);
vmstate_register (NULL, 0, &vmstate_audio, s);
LIST_INIT (&s->card_head);
register_savevm ("audio", 0, 1, audio_save, audio_load, s);
qemu_mod_timer (s->ts, qemu_get_clock (vm_clock) + conf.period.ticks);
return s;
}
void AUD_register_card (const char *name, QEMUSoundCard *card)
{
audio_init ();
card->name = qemu_strdup (name);
memset (&card->entries, 0, sizeof (card->entries));
QLIST_INSERT_HEAD (&glob_audio_state.card_head, card, entries);
}
void AUD_remove_card (QEMUSoundCard *card)
{
QLIST_REMOVE (card, entries);
qemu_free (card->name);
}
CaptureVoiceOut *AUD_add_capture (
AudioState *s,
struct audsettings *as,
struct audio_capture_ops *ops,
void *cb_opaque
)
{
AudioState *s = &glob_audio_state;
CaptureVoiceOut *cap;
struct capture_callback *cb;
if (!s) {
/* XXX suppress */
s = &glob_audio_state;
}
if (audio_validate_settings (as)) {
dolog ("Invalid settings were passed when trying to add capture\n");
audio_print_settings (as);
@@ -1944,9 +1841,9 @@ CaptureVoiceOut *AUD_add_capture (
cb->ops = *ops;
cb->opaque = cb_opaque;
cap = audio_pcm_capture_find_specific (as);
cap = audio_pcm_capture_find_specific (s, as);
if (cap) {
QLIST_INSERT_HEAD (&cap->cb_head, cb, entries);
LIST_INSERT_HEAD (&cap->cb_head, cb, entries);
return cap;
}
else {
@@ -1961,8 +1858,8 @@ CaptureVoiceOut *AUD_add_capture (
}
hw = &cap->hw;
QLIST_INIT (&hw->sw_head);
QLIST_INIT (&cap->cb_head);
LIST_INIT (&hw->sw_head);
LIST_INIT (&cap->cb_head);
/* XXX find a more elegant way */
hw->samples = 4096 * 4;
@@ -1990,12 +1887,12 @@ CaptureVoiceOut *AUD_add_capture (
[hw->info.swap_endianness]
[audio_bits_to_index (hw->info.bits)];
QLIST_INSERT_HEAD (&s->cap_head, cap, entries);
QLIST_INSERT_HEAD (&cap->cb_head, cb, entries);
LIST_INSERT_HEAD (&s->cap_head, cap, entries);
LIST_INSERT_HEAD (&cap->cb_head, cb, entries);
hw = NULL;
while ((hw = audio_pcm_hw_find_any_out (hw))) {
audio_attach_capture (hw);
while ((hw = audio_pcm_hw_find_any_out (s, hw))) {
audio_attach_capture (s, hw);
}
return cap;
@@ -2017,7 +1914,7 @@ void AUD_del_capture (CaptureVoiceOut *cap, void *cb_opaque)
for (cb = cap->cb_head.lh_first; cb; cb = cb->entries.le_next) {
if (cb->opaque == cb_opaque) {
cb->ops.destroy (cb_opaque);
QLIST_REMOVE (cb, entries);
LIST_REMOVE (cb, entries);
qemu_free (cb);
if (!cap->cb_head.lh_first) {
@@ -2034,12 +1931,12 @@ void AUD_del_capture (CaptureVoiceOut *cap, void *cb_opaque)
st_rate_stop (sw->rate);
sw->rate = NULL;
}
QLIST_REMOVE (sw, entries);
QLIST_REMOVE (sc, entries);
LIST_REMOVE (sw, entries);
LIST_REMOVE (sc, entries);
qemu_free (sc);
sw = sw1;
}
QLIST_REMOVE (cap, entries);
LIST_REMOVE (cap, entries);
qemu_free (cap);
}
return;

View File

@@ -25,9 +25,9 @@
#define QEMU_AUDIO_H
#include "config-host.h"
#include "qemu-queue.h"
#include "sys-queue.h"
typedef void (*audio_callback_fn) (void *opaque, int avail);
typedef void (*audio_callback_fn_t) (void *opaque, int avail);
typedef enum {
AUD_FMT_U8,
@@ -38,7 +38,7 @@ typedef enum {
AUD_FMT_S32
} audfmt_e;
#ifdef HOST_WORDS_BIGENDIAN
#ifdef WORDS_BIGENDIAN
#define AUDIO_HOST_ENDIANNESS 1
#else
#define AUDIO_HOST_ENDIANNESS 0
@@ -70,7 +70,7 @@ struct capture_ops {
typedef struct CaptureState {
void *opaque;
struct capture_ops ops;
QLIST_ENTRY (CaptureState) entries;
LIST_ENTRY (CaptureState) entries;
} CaptureState;
typedef struct SWVoiceOut SWVoiceOut;
@@ -78,21 +78,28 @@ typedef struct CaptureVoiceOut CaptureVoiceOut;
typedef struct SWVoiceIn SWVoiceIn;
typedef struct QEMUSoundCard {
AudioState *audio;
char *name;
QLIST_ENTRY (QEMUSoundCard) entries;
LIST_ENTRY (QEMUSoundCard) entries;
} QEMUSoundCard;
typedef struct QEMUAudioTimeStamp {
uint64_t old_ts;
} QEMUAudioTimeStamp;
void AUD_vlog (const char *cap, const char *fmt, va_list ap) GCC_FMT_ATTR(2, 0);
void AUD_log (const char *cap, const char *fmt, ...) GCC_FMT_ATTR(2, 3);
void AUD_vlog (const char *cap, const char *fmt, va_list ap);
void AUD_log (const char *cap, const char *fmt, ...)
#ifdef __GNUC__
__attribute__ ((__format__ (__printf__, 2, 3)))
#endif
;
AudioState *AUD_init (void);
void AUD_help (void);
void AUD_register_card (const char *name, QEMUSoundCard *card);
void AUD_register_card (AudioState *s, const char *name, QEMUSoundCard *card);
void AUD_remove_card (QEMUSoundCard *card);
CaptureVoiceOut *AUD_add_capture (
AudioState *s,
struct audsettings *as,
struct audio_capture_ops *ops,
void *opaque
@@ -104,7 +111,7 @@ SWVoiceOut *AUD_open_out (
SWVoiceOut *sw,
const char *name,
void *callback_opaque,
audio_callback_fn callback_fn,
audio_callback_fn_t callback_fn,
struct audsettings *settings
);
@@ -125,7 +132,7 @@ SWVoiceIn *AUD_open_in (
SWVoiceIn *sw,
const char *name,
void *callback_opaque,
audio_callback_fn callback_fn,
audio_callback_fn_t callback_fn,
struct audsettings *settings
);
@@ -143,6 +150,9 @@ static inline void *advance (void *p, int incr)
return (d + incr);
}
uint32_t popcount (uint32_t u);
uint32_t lsbindex (uint32_t u);
#ifdef __GNUC__
#define audio_MIN(a, b) ( __extension__ ({ \
__typeof (a) ta = a; \

View File

@@ -50,7 +50,7 @@ struct audio_option {
struct audio_callback {
void *opaque;
audio_callback_fn fn;
audio_callback_fn_t fn;
};
struct audio_pcm_info {
@@ -68,7 +68,6 @@ typedef struct SWVoiceCap SWVoiceCap;
typedef struct HWVoiceOut {
int enabled;
int poll_mode;
int pending_disable;
struct audio_pcm_info info;
@@ -80,15 +79,14 @@ typedef struct HWVoiceOut {
struct st_sample *mix_buf;
int samples;
QLIST_HEAD (sw_out_listhead, SWVoiceOut) sw_head;
QLIST_HEAD (sw_cap_listhead, SWVoiceCap) cap_head;
LIST_HEAD (sw_out_listhead, SWVoiceOut) sw_head;
LIST_HEAD (sw_cap_listhead, SWVoiceCap) cap_head;
struct audio_pcm_ops *pcm_ops;
QLIST_ENTRY (HWVoiceOut) entries;
LIST_ENTRY (HWVoiceOut) entries;
} HWVoiceOut;
typedef struct HWVoiceIn {
int enabled;
int poll_mode;
struct audio_pcm_info info;
t_sample *conv;
@@ -100,13 +98,12 @@ typedef struct HWVoiceIn {
struct st_sample *conv_buf;
int samples;
QLIST_HEAD (sw_in_listhead, SWVoiceIn) sw_head;
LIST_HEAD (sw_in_listhead, SWVoiceIn) sw_head;
struct audio_pcm_ops *pcm_ops;
QLIST_ENTRY (HWVoiceIn) entries;
LIST_ENTRY (HWVoiceIn) entries;
} HWVoiceIn;
struct SWVoiceOut {
QEMUSoundCard *card;
struct audio_pcm_info info;
t_sample *conv;
int64_t ratio;
@@ -119,11 +116,10 @@ struct SWVoiceOut {
char *name;
struct mixeng_volume vol;
struct audio_callback callback;
QLIST_ENTRY (SWVoiceOut) entries;
LIST_ENTRY (SWVoiceOut) entries;
};
struct SWVoiceIn {
QEMUSoundCard *card;
int active;
struct audio_pcm_info info;
int64_t ratio;
@@ -135,7 +131,7 @@ struct SWVoiceIn {
char *name;
struct mixeng_volume vol;
struct audio_callback callback;
QLIST_ENTRY (SWVoiceIn) entries;
LIST_ENTRY (SWVoiceIn) entries;
};
struct audio_driver {
@@ -155,7 +151,7 @@ struct audio_driver {
struct audio_pcm_ops {
int (*init_out)(HWVoiceOut *hw, struct audsettings *as);
void (*fini_out)(HWVoiceOut *hw);
int (*run_out) (HWVoiceOut *hw, int live);
int (*run_out) (HWVoiceOut *hw);
int (*write) (SWVoiceOut *sw, void *buf, int size);
int (*ctl_out) (HWVoiceOut *hw, int cmd, ...);
@@ -169,20 +165,20 @@ struct audio_pcm_ops {
struct capture_callback {
struct audio_capture_ops ops;
void *opaque;
QLIST_ENTRY (capture_callback) entries;
LIST_ENTRY (capture_callback) entries;
};
struct CaptureVoiceOut {
HWVoiceOut hw;
void *buf;
QLIST_HEAD (cb_listhead, capture_callback) cb_head;
QLIST_ENTRY (CaptureVoiceOut) entries;
LIST_HEAD (cb_listhead, capture_callback) cb_head;
LIST_ENTRY (CaptureVoiceOut) entries;
};
struct SWVoiceCap {
SWVoiceOut sw;
CaptureVoiceOut *cap;
QLIST_ENTRY (SWVoiceCap) entries;
LIST_ENTRY (SWVoiceCap) entries;
};
struct AudioState {
@@ -190,10 +186,10 @@ struct AudioState {
void *drv_opaque;
QEMUTimer *ts;
QLIST_HEAD (card_listhead, QEMUSoundCard) card_head;
QLIST_HEAD (hw_in_listhead, HWVoiceIn) hw_head_in;
QLIST_HEAD (hw_out_listhead, HWVoiceOut) hw_head_out;
QLIST_HEAD (cap_listhead, CaptureVoiceOut) cap_head;
LIST_HEAD (card_listhead, QEMUSoundCard) card_head;
LIST_HEAD (hw_in_listhead, HWVoiceIn) hw_head_in;
LIST_HEAD (hw_out_listhead, HWVoiceOut) hw_head_out;
LIST_HEAD (cap_listhead, CaptureVoiceOut) cap_head;
int nb_hw_voices_out;
int nb_hw_voices_in;
int vm_running;
@@ -209,9 +205,7 @@ extern struct audio_driver coreaudio_audio_driver;
extern struct audio_driver dsound_audio_driver;
extern struct audio_driver esd_audio_driver;
extern struct audio_driver pa_audio_driver;
extern struct audio_driver spice_audio_driver;
extern struct audio_driver winwave_audio_driver;
extern const struct mixeng_volume nominal_volume;
extern struct mixeng_volume nominal_volume;
void audio_pcm_init_info (struct audio_pcm_info *info, struct audsettings *as);
void audio_pcm_info_clear_buf (struct audio_pcm_info *info, void *buf, int len);
@@ -220,15 +214,12 @@ int audio_pcm_sw_write (SWVoiceOut *sw, void *buf, int len);
int audio_pcm_hw_get_live_in (HWVoiceIn *hw);
int audio_pcm_sw_read (SWVoiceIn *sw, void *buf, int len);
int audio_pcm_hw_clip_out (HWVoiceOut *hw, void *pcm_buf,
int live, int pending);
int audio_pcm_hw_get_live_out (HWVoiceOut *hw);
int audio_pcm_hw_get_live_out2 (HWVoiceOut *hw, int *nb_live);
int audio_bug (const char *funcname, int cond);
void *audio_calloc (const char *funcname, int nmemb, size_t size);
void audio_run (const char *msg);
#define VOICE_ENABLE 1
#define VOICE_DISABLE 2
@@ -237,6 +228,16 @@ static inline int audio_ring_dist (int dst, int src, int len)
return (dst >= src) ? (dst - src) : (len - src + dst);
}
#if defined __GNUC__
#define GCC_ATTR __attribute__ ((__unused__, __format__ (__printf__, 1, 2)))
#define INIT_FIELD(f) . f
#define GCC_FMT_ATTR(n, m) __attribute__ ((__format__ (__printf__, n, m)))
#else
#define GCC_ATTR /**/
#define INIT_FIELD(f) /**/
#define GCC_FMT_ATTR(n, m)
#endif
static void GCC_ATTR dolog (const char *fmt, ...)
{
va_list ap;

View File

@@ -6,10 +6,7 @@
#include "audio_int.h"
#include "audio_pt_int.h"
#include <signal.h>
static void GCC_FMT_ATTR(3, 4) logerr (struct audio_pt *pt, int err,
const char *fmt, ...)
static void logerr (struct audio_pt *pt, int err, const char *fmt, ...)
{
va_list ap;
@@ -26,16 +23,9 @@ int audio_pt_init (struct audio_pt *p, void *(*func) (void *),
{
int err, err2;
const char *efunc;
sigset_t set, old_set;
p->drv = drv;
err = sigfillset (&set);
if (err) {
logerr (p, errno, "%s(%s): sigfillset failed", cap, AUDIO_FUNC);
return -1;
}
err = pthread_mutex_init (&p->mutex, NULL);
if (err) {
efunc = "pthread_mutex_init";
@@ -48,23 +38,7 @@ int audio_pt_init (struct audio_pt *p, void *(*func) (void *),
goto err1;
}
err = pthread_sigmask (SIG_BLOCK, &set, &old_set);
if (err) {
efunc = "pthread_sigmask";
goto err2;
}
err = pthread_create (&p->thread, NULL, func, opaque);
err2 = pthread_sigmask (SIG_SETMASK, &old_set, NULL);
if (err2) {
logerr (p, err2, "%s(%s): pthread_sigmask (restore) failed",
cap, AUDIO_FUNC);
/* We have failed to restore original signal mask, all bets are off,
so terminate the process */
exit (EXIT_FAILURE);
}
if (err) {
efunc = "pthread_create";
goto err2;

View File

@@ -36,9 +36,11 @@
#define HWBUF hw->conv_buf
#endif
static void glue (audio_init_nb_voices_, TYPE) (struct audio_driver *drv)
static void glue (audio_init_nb_voices_, TYPE) (
AudioState *s,
struct audio_driver *drv
)
{
AudioState *s = &glob_audio_state;
int max_voices = glue (drv->max_voices_, TYPE);
int voice_size = glue (drv->voice_size_, TYPE);
@@ -108,7 +110,11 @@ static int glue (audio_pcm_sw_alloc_resources_, TYPE) (SW *sw)
{
int samples;
#ifdef DAC
samples = sw->hw->samples;
#else
samples = ((int64_t) sw->hw->samples << 32) / sw->ratio;
#endif
sw->buf = audio_calloc (AUDIO_FUNC, samples, sizeof (struct st_sample));
if (!sw->buf) {
@@ -180,24 +186,23 @@ static void glue (audio_pcm_sw_fini_, TYPE) (SW *sw)
static void glue (audio_pcm_hw_add_sw_, TYPE) (HW *hw, SW *sw)
{
QLIST_INSERT_HEAD (&hw->sw_head, sw, entries);
LIST_INSERT_HEAD (&hw->sw_head, sw, entries);
}
static void glue (audio_pcm_hw_del_sw_, TYPE) (SW *sw)
{
QLIST_REMOVE (sw, entries);
LIST_REMOVE (sw, entries);
}
static void glue (audio_pcm_hw_gc_, TYPE) (HW **hwp)
static void glue (audio_pcm_hw_gc_, TYPE) (AudioState *s, HW **hwp)
{
AudioState *s = &glob_audio_state;
HW *hw = *hwp;
if (!hw->sw_head.lh_first) {
#ifdef DAC
audio_detach_capture (hw);
#endif
QLIST_REMOVE (hw, entries);
LIST_REMOVE (hw, entries);
glue (s->nb_hw_voices_, TYPE) += 1;
glue (audio_pcm_hw_free_resources_ ,TYPE) (hw);
glue (hw->pcm_ops->fini_, TYPE) (hw);
@@ -206,15 +211,14 @@ static void glue (audio_pcm_hw_gc_, TYPE) (HW **hwp)
}
}
static HW *glue (audio_pcm_hw_find_any_, TYPE) (HW *hw)
static HW *glue (audio_pcm_hw_find_any_, TYPE) (AudioState *s, HW *hw)
{
AudioState *s = &glob_audio_state;
return hw ? hw->entries.le_next : glue (s->hw_head_, TYPE).lh_first;
return hw ? hw->entries.le_next : s->glue (hw_head_, TYPE).lh_first;
}
static HW *glue (audio_pcm_hw_find_any_enabled_, TYPE) (HW *hw)
static HW *glue (audio_pcm_hw_find_any_enabled_, TYPE) (AudioState *s, HW *hw)
{
while ((hw = glue (audio_pcm_hw_find_any_, TYPE) (hw))) {
while ((hw = glue (audio_pcm_hw_find_any_, TYPE) (s, hw))) {
if (hw->enabled) {
return hw;
}
@@ -223,11 +227,12 @@ static HW *glue (audio_pcm_hw_find_any_enabled_, TYPE) (HW *hw)
}
static HW *glue (audio_pcm_hw_find_specific_, TYPE) (
AudioState *s,
HW *hw,
struct audsettings *as
)
{
while ((hw = glue (audio_pcm_hw_find_any_, TYPE) (hw))) {
while ((hw = glue (audio_pcm_hw_find_any_, TYPE) (s, hw))) {
if (audio_pcm_info_eq (&hw->info, as)) {
return hw;
}
@@ -235,10 +240,10 @@ static HW *glue (audio_pcm_hw_find_specific_, TYPE) (
return NULL;
}
static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
static HW *glue (audio_pcm_hw_add_new_, TYPE) (AudioState *s,
struct audsettings *as)
{
HW *hw;
AudioState *s = &glob_audio_state;
struct audio_driver *drv = s->drv;
if (!glue (s->nb_hw_voices_, TYPE)) {
@@ -263,9 +268,9 @@ static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
}
hw->pcm_ops = drv->pcm_ops;
QLIST_INIT (&hw->sw_head);
LIST_INIT (&hw->sw_head);
#ifdef DAC
QLIST_INIT (&hw->cap_head);
LIST_INIT (&hw->cap_head);
#endif
if (glue (hw->pcm_ops->init_, TYPE) (hw, as)) {
goto err0;
@@ -290,10 +295,10 @@ static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
goto err1;
}
QLIST_INSERT_HEAD (&s->glue (hw_head_, TYPE), hw, entries);
LIST_INSERT_HEAD (&s->glue (hw_head_, TYPE), hw, entries);
glue (s->nb_hw_voices_, TYPE) -= 1;
#ifdef DAC
audio_attach_capture (hw);
audio_attach_capture (s, hw);
#endif
return hw;
@@ -304,31 +309,33 @@ static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
return NULL;
}
static HW *glue (audio_pcm_hw_add_, TYPE) (struct audsettings *as)
static HW *glue (audio_pcm_hw_add_, TYPE) (AudioState *s,
struct audsettings *as)
{
HW *hw;
if (glue (conf.fixed_, TYPE).enabled && glue (conf.fixed_, TYPE).greedy) {
hw = glue (audio_pcm_hw_add_new_, TYPE) (as);
hw = glue (audio_pcm_hw_add_new_, TYPE) (s, as);
if (hw) {
return hw;
}
}
hw = glue (audio_pcm_hw_find_specific_, TYPE) (NULL, as);
hw = glue (audio_pcm_hw_find_specific_, TYPE) (s, NULL, as);
if (hw) {
return hw;
}
hw = glue (audio_pcm_hw_add_new_, TYPE) (as);
hw = glue (audio_pcm_hw_add_new_, TYPE) (s, as);
if (hw) {
return hw;
}
return glue (audio_pcm_hw_find_any_, TYPE) (NULL);
return glue (audio_pcm_hw_find_any_, TYPE) (s, NULL);
}
static SW *glue (audio_pcm_create_voice_pair_, TYPE) (
AudioState *s,
const char *sw_name,
struct audsettings *as
)
@@ -351,7 +358,7 @@ static SW *glue (audio_pcm_create_voice_pair_, TYPE) (
goto err1;
}
hw = glue (audio_pcm_hw_add_, TYPE) (&hw_as);
hw = glue (audio_pcm_hw_add_, TYPE) (s, &hw_as);
if (!hw) {
goto err2;
}
@@ -366,30 +373,31 @@ static SW *glue (audio_pcm_create_voice_pair_, TYPE) (
err3:
glue (audio_pcm_hw_del_sw_, TYPE) (sw);
glue (audio_pcm_hw_gc_, TYPE) (&hw);
glue (audio_pcm_hw_gc_, TYPE) (s, &hw);
err2:
qemu_free (sw);
err1:
return NULL;
}
static void glue (audio_close_, TYPE) (SW *sw)
static void glue (audio_close_, TYPE) (AudioState *s, SW *sw)
{
glue (audio_pcm_sw_fini_, TYPE) (sw);
glue (audio_pcm_hw_del_sw_, TYPE) (sw);
glue (audio_pcm_hw_gc_, TYPE) (&sw->hw);
glue (audio_pcm_hw_gc_, TYPE) (s, &sw->hw);
qemu_free (sw);
}
void glue (AUD_close_, TYPE) (QEMUSoundCard *card, SW *sw)
{
if (sw) {
if (audio_bug (AUDIO_FUNC, !card)) {
dolog ("card=%p\n", card);
if (audio_bug (AUDIO_FUNC, !card || !card->audio)) {
dolog ("card=%p card->audio=%p\n",
card, card ? card->audio : NULL);
return;
}
glue (audio_close_, TYPE) (sw);
glue (audio_close_, TYPE) (card->audio, sw);
}
}
@@ -398,11 +406,11 @@ SW *glue (AUD_open_, TYPE) (
SW *sw,
const char *name,
void *callback_opaque ,
audio_callback_fn callback_fn,
audio_callback_fn_t callback_fn,
struct audsettings *as
)
{
AudioState *s = &glob_audio_state;
AudioState *s;
#ifdef DAC
int live = 0;
SW *old_sw = NULL;
@@ -411,12 +419,15 @@ SW *glue (AUD_open_, TYPE) (
ldebug ("open %s, freq %d, nchannels %d, fmt %d\n",
name, as->freq, as->nchannels, as->fmt);
if (audio_bug (AUDIO_FUNC, !card || !name || !callback_fn || !as)) {
dolog ("card=%p name=%p callback_fn=%p as=%p\n",
card, name, callback_fn, as);
if (audio_bug (AUDIO_FUNC,
!card || !card->audio || !name || !callback_fn || !as)) {
dolog ("card=%p card->audio=%p name=%p callback_fn=%p as=%p\n",
card, card ? card->audio : NULL, name, callback_fn, as);
goto fail;
}
s = card->audio;
if (audio_bug (AUDIO_FUNC, audio_validate_settings (as))) {
audio_print_settings (as);
goto fail;
@@ -441,9 +452,9 @@ SW *glue (AUD_open_, TYPE) (
SW_NAME (sw), sw->info.freq, sw->info.bits, sw->info.nchannels);
dolog ("New %s freq %d, bits %d, channels %d\n",
name,
as->freq,
(as->fmt == AUD_FMT_S16 || as->fmt == AUD_FMT_U16) ? 16 : 8,
as->nchannels);
freq,
(fmt == AUD_FMT_S16 || fmt == AUD_FMT_U16) ? 16 : 8,
nchannels);
#endif
if (live) {
@@ -474,37 +485,38 @@ SW *glue (AUD_open_, TYPE) (
}
}
else {
sw = glue (audio_pcm_create_voice_pair_, TYPE) (name, as);
sw = glue (audio_pcm_create_voice_pair_, TYPE) (s, name, as);
if (!sw) {
dolog ("Failed to create voice `%s'\n", name);
return NULL;
}
}
sw->card = card;
sw->vol = nominal_volume;
sw->callback.fn = callback_fn;
sw->callback.opaque = callback_opaque;
if (sw) {
sw->vol = nominal_volume;
sw->callback.fn = callback_fn;
sw->callback.opaque = callback_opaque;
#ifdef DAC
if (live) {
int mixed =
(live << old_sw->info.shift)
* old_sw->info.bytes_per_second
/ sw->info.bytes_per_second;
if (live) {
int mixed =
(live << old_sw->info.shift)
* old_sw->info.bytes_per_second
/ sw->info.bytes_per_second;
#ifdef DEBUG_PLIVE
dolog ("Silence will be mixed %d\n", mixed);
dolog ("Silence will be mixed %d\n", mixed);
#endif
sw->total_hw_samples_mixed += mixed;
}
sw->total_hw_samples_mixed += mixed;
}
#endif
#ifdef DEBUG_AUDIO
dolog ("%s\n", name);
audio_pcm_print_info ("hw", &sw->hw->info);
audio_pcm_print_info ("sw", &sw->info);
dolog ("%s\n", name);
audio_pcm_print_info ("hw", &sw->hw->info);
audio_pcm_print_info ("sw", &sw->info);
#endif
}
return sw;
@@ -537,7 +549,7 @@ uint64_t glue (AUD_get_elapsed_usec_, TYPE) (SW *sw, QEMUAudioTimeStamp *ts)
cur_ts = sw->hw->ts_helper;
old_ts = ts->old_ts;
/* dolog ("cur %" PRId64 " old %" PRId64 "\n", cur_ts, old_ts); */
/* dolog ("cur %lld old %lld\n", cur_ts, old_ts); */
if (cur_ts >= old_ts) {
delta = cur_ts - old_ts;
@@ -550,7 +562,7 @@ uint64_t glue (AUD_get_elapsed_usec_, TYPE) (SW *sw, QEMUAudioTimeStamp *ts)
return 0;
}
return muldiv64 (delta, sw->hw->info.freq, 1000000);
return (delta * sw->hw->info.freq) / 1000000;
}
#undef TYPE

View File

@@ -1,108 +0,0 @@
/* public domain */
#include "qemu-common.h"
#include "audio.h"
#define AUDIO_CAP "win-int"
#include <windows.h>
#include <mmsystem.h>
#include "audio.h"
#include "audio_int.h"
#include "audio_win_int.h"
int waveformat_from_audio_settings (WAVEFORMATEX *wfx,
struct audsettings *as)
{
memset (wfx, 0, sizeof (*wfx));
wfx->wFormatTag = WAVE_FORMAT_PCM;
wfx->nChannels = as->nchannels;
wfx->nSamplesPerSec = as->freq;
wfx->nAvgBytesPerSec = as->freq << (as->nchannels == 2);
wfx->nBlockAlign = 1 << (as->nchannels == 2);
wfx->cbSize = 0;
switch (as->fmt) {
case AUD_FMT_S8:
case AUD_FMT_U8:
wfx->wBitsPerSample = 8;
break;
case AUD_FMT_S16:
case AUD_FMT_U16:
wfx->wBitsPerSample = 16;
wfx->nAvgBytesPerSec <<= 1;
wfx->nBlockAlign <<= 1;
break;
case AUD_FMT_S32:
case AUD_FMT_U32:
wfx->wBitsPerSample = 32;
wfx->nAvgBytesPerSec <<= 2;
wfx->nBlockAlign <<= 2;
break;
default:
dolog ("Internal logic error: Bad audio format %d\n", as->freq);
return -1;
}
return 0;
}
int waveformat_to_audio_settings (WAVEFORMATEX *wfx,
struct audsettings *as)
{
if (wfx->wFormatTag != WAVE_FORMAT_PCM) {
dolog ("Invalid wave format, tag is not PCM, but %d\n",
wfx->wFormatTag);
return -1;
}
if (!wfx->nSamplesPerSec) {
dolog ("Invalid wave format, frequency is zero\n");
return -1;
}
as->freq = wfx->nSamplesPerSec;
switch (wfx->nChannels) {
case 1:
as->nchannels = 1;
break;
case 2:
as->nchannels = 2;
break;
default:
dolog (
"Invalid wave format, number of channels is not 1 or 2, but %d\n",
wfx->nChannels
);
return -1;
}
switch (wfx->wBitsPerSample) {
case 8:
as->fmt = AUD_FMT_U8;
break;
case 16:
as->fmt = AUD_FMT_S16;
break;
case 32:
as->fmt = AUD_FMT_S32;
break;
default:
dolog ("Invalid wave format, bits per sample is not "
"8, 16 or 32, but %d\n",
wfx->wBitsPerSample);
return -1;
}
return 0;
}

View File

@@ -1,10 +0,0 @@
#ifndef AUDIO_WIN_INT_H
#define AUDIO_WIN_INT_H
int waveformat_from_audio_settings (WAVEFORMATEX *wfx,
struct audsettings *as);
int waveformat_to_audio_settings (WAVEFORMATEX *wfx,
struct audsettings *as);
#endif /* AUDIO_WIN_INT_H */

View File

@@ -190,15 +190,17 @@ static int coreaudio_unlock (coreaudioVoiceOut *core, const char *fn_name)
return 0;
}
static int coreaudio_run_out (HWVoiceOut *hw, int live)
static int coreaudio_run_out (HWVoiceOut *hw)
{
int decr;
int live, decr;
coreaudioVoiceOut *core = (coreaudioVoiceOut *) hw;
if (coreaudio_lock (core, "coreaudio_run_out")) {
return 0;
}
live = audio_pcm_hw_get_live_out (hw);
if (core->decr > live) {
ldebug ("core->decr %d live %d core->live %d\n",
core->decr,
@@ -511,39 +513,38 @@ static void coreaudio_audio_fini (void *opaque)
}
static struct audio_option coreaudio_options[] = {
{
.name = "BUFFER_SIZE",
.tag = AUD_OPT_INT,
.valp = &conf.buffer_frames,
.descr = "Size of the buffer in frames"
},
{
.name = "BUFFER_COUNT",
.tag = AUD_OPT_INT,
.valp = &conf.nbuffers,
.descr = "Number of buffers"
},
{ /* End of list */ }
{"BUFFER_SIZE", AUD_OPT_INT, &conf.buffer_frames,
"Size of the buffer in frames", NULL, 0},
{"BUFFER_COUNT", AUD_OPT_INT, &conf.nbuffers,
"Number of buffers", NULL, 0},
{NULL, 0, NULL, NULL, NULL, 0}
};
static struct audio_pcm_ops coreaudio_pcm_ops = {
.init_out = coreaudio_init_out,
.fini_out = coreaudio_fini_out,
.run_out = coreaudio_run_out,
.write = coreaudio_write,
.ctl_out = coreaudio_ctl_out
coreaudio_init_out,
coreaudio_fini_out,
coreaudio_run_out,
coreaudio_write,
coreaudio_ctl_out,
NULL,
NULL,
NULL,
NULL,
NULL
};
struct audio_driver coreaudio_audio_driver = {
.name = "coreaudio",
.descr = "CoreAudio http://developer.apple.com/audio/coreaudio.html",
.options = coreaudio_options,
.init = coreaudio_audio_init,
.fini = coreaudio_audio_fini,
.pcm_ops = &coreaudio_pcm_ops,
.can_be_default = 1,
.max_voices_out = 1,
.max_voices_in = 0,
.voice_size_out = sizeof (coreaudioVoiceOut),
.voice_size_in = 0
INIT_FIELD (name = ) "coreaudio",
INIT_FIELD (descr = )
"CoreAudio http://developer.apple.com/audio/coreaudio.html",
INIT_FIELD (options = ) coreaudio_options,
INIT_FIELD (init = ) coreaudio_audio_init,
INIT_FIELD (fini = ) coreaudio_audio_fini,
INIT_FIELD (pcm_ops = ) &coreaudio_pcm_ops,
INIT_FIELD (can_be_default = ) 1,
INIT_FIELD (max_voices_out = ) 1,
INIT_FIELD (max_voices_in = ) 0,
INIT_FIELD (voice_size_out = ) sizeof (coreaudioVoiceOut),
INIT_FIELD (voice_size_in = ) 0
};

View File

@@ -32,13 +32,12 @@
#define AUDIO_CAP "dsound"
#include "audio_int.h"
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#include <mmsystem.h>
#include <objbase.h>
#include <dsound.h>
#include "audio_win_int.h"
/* #define DEBUG_DSOUND */
static struct {
@@ -51,16 +50,18 @@ static struct {
struct audsettings settings;
int latency_millis;
} conf = {
.lock_retries = 1,
.restore_retries = 1,
.getstatus_retries = 1,
.set_primary = 0,
.bufsize_in = 16384,
.bufsize_out = 16384,
.settings.freq = 44100,
.settings.nchannels = 2,
.settings.fmt = AUD_FMT_S16,
.latency_millis = 10
1,
1,
1,
0,
16384,
16384,
{
44100,
2,
AUD_FMT_S16
},
10
};
typedef struct {
@@ -306,6 +307,101 @@ static int dsound_restore_out (LPDIRECTSOUNDBUFFER dsb)
return -1;
}
static int waveformat_from_audio_settings (WAVEFORMATEX *wfx,
struct audsettings *as)
{
memset (wfx, 0, sizeof (*wfx));
wfx->wFormatTag = WAVE_FORMAT_PCM;
wfx->nChannels = as->nchannels;
wfx->nSamplesPerSec = as->freq;
wfx->nAvgBytesPerSec = as->freq << (as->nchannels == 2);
wfx->nBlockAlign = 1 << (as->nchannels == 2);
wfx->cbSize = 0;
switch (as->fmt) {
case AUD_FMT_S8:
case AUD_FMT_U8:
wfx->wBitsPerSample = 8;
break;
case AUD_FMT_S16:
case AUD_FMT_U16:
wfx->wBitsPerSample = 16;
wfx->nAvgBytesPerSec <<= 1;
wfx->nBlockAlign <<= 1;
break;
case AUD_FMT_S32:
case AUD_FMT_U32:
wfx->wBitsPerSample = 32;
wfx->nAvgBytesPerSec <<= 2;
wfx->nBlockAlign <<= 2;
break;
default:
dolog ("Internal logic error: Bad audio format %d\n", as->freq);
return -1;
}
return 0;
}
static int waveformat_to_audio_settings (WAVEFORMATEX *wfx,
struct audsettings *as)
{
if (wfx->wFormatTag != WAVE_FORMAT_PCM) {
dolog ("Invalid wave format, tag is not PCM, but %d\n",
wfx->wFormatTag);
return -1;
}
if (!wfx->nSamplesPerSec) {
dolog ("Invalid wave format, frequency is zero\n");
return -1;
}
as->freq = wfx->nSamplesPerSec;
switch (wfx->nChannels) {
case 1:
as->nchannels = 1;
break;
case 2:
as->nchannels = 2;
break;
default:
dolog (
"Invalid wave format, number of channels is not 1 or 2, but %d\n",
wfx->nChannels
);
return -1;
}
switch (wfx->wBitsPerSample) {
case 8:
as->fmt = AUD_FMT_U8;
break;
case 16:
as->fmt = AUD_FMT_S16;
break;
case 32:
as->fmt = AUD_FMT_S32;
break;
default:
dolog ("Invalid wave format, bits per sample is not "
"8, 16 or 32, but %d\n",
wfx->wBitsPerSample);
return -1;
}
return 0;
}
#include "dsound_template.h"
#define DSBTYPE_IN
#include "dsound_template.h"
@@ -565,13 +661,13 @@ static int dsound_write (SWVoiceOut *sw, void *buf, int len)
return audio_pcm_sw_write (sw, buf, len);
}
static int dsound_run_out (HWVoiceOut *hw, int live)
static int dsound_run_out (HWVoiceOut *hw)
{
int err;
HRESULT hr;
DSoundVoiceOut *ds = (DSoundVoiceOut *) hw;
LPDIRECTSOUNDBUFFER dsb = ds->dsound_buffer;
int len, hwshift;
int live, len, hwshift;
DWORD blen1, blen2;
DWORD len1, len2;
DWORD decr;
@@ -587,6 +683,8 @@ static int dsound_run_out (HWVoiceOut *hw, int live)
hwshift = hw->info.shift;
bufsize = hw->samples << hwshift;
live = audio_pcm_hw_get_live_out (hw);
hr = IDirectSoundBuffer_GetCurrentPosition (
dsb,
&ppos,
@@ -831,11 +929,11 @@ static int dsound_run_in (HWVoiceIn *hw)
decr = len1 + len2;
if (p1 && len1) {
hw->conv (hw->conv_buf + hw->wpos, p1, len1);
hw->conv (hw->conv_buf + hw->wpos, p1, len1, &nominal_volume);
}
if (p2 && len2) {
hw->conv (hw->conv_buf, p2, len2);
hw->conv (hw->conv_buf, p2, len2, &nominal_volume);
}
dsound_unlock_in (dscb, p1, p2, blen1, blen2);
@@ -938,93 +1036,54 @@ static void *dsound_audio_init (void)
}
static struct audio_option dsound_options[] = {
{
.name = "LOCK_RETRIES",
.tag = AUD_OPT_INT,
.valp = &conf.lock_retries,
.descr = "Number of times to attempt locking the buffer"
},
{
.name = "RESTOURE_RETRIES",
.tag = AUD_OPT_INT,
.valp = &conf.restore_retries,
.descr = "Number of times to attempt restoring the buffer"
},
{
.name = "GETSTATUS_RETRIES",
.tag = AUD_OPT_INT,
.valp = &conf.getstatus_retries,
.descr = "Number of times to attempt getting status of the buffer"
},
{
.name = "SET_PRIMARY",
.tag = AUD_OPT_BOOL,
.valp = &conf.set_primary,
.descr = "Set the parameters of primary buffer"
},
{
.name = "LATENCY_MILLIS",
.tag = AUD_OPT_INT,
.valp = &conf.latency_millis,
.descr = "(undocumented)"
},
{
.name = "PRIMARY_FREQ",
.tag = AUD_OPT_INT,
.valp = &conf.settings.freq,
.descr = "Primary buffer frequency"
},
{
.name = "PRIMARY_CHANNELS",
.tag = AUD_OPT_INT,
.valp = &conf.settings.nchannels,
.descr = "Primary buffer number of channels (1 - mono, 2 - stereo)"
},
{
.name = "PRIMARY_FMT",
.tag = AUD_OPT_FMT,
.valp = &conf.settings.fmt,
.descr = "Primary buffer format"
},
{
.name = "BUFSIZE_OUT",
.tag = AUD_OPT_INT,
.valp = &conf.bufsize_out,
.descr = "(undocumented)"
},
{
.name = "BUFSIZE_IN",
.tag = AUD_OPT_INT,
.valp = &conf.bufsize_in,
.descr = "(undocumented)"
},
{ /* End of list */ }
{"LOCK_RETRIES", AUD_OPT_INT, &conf.lock_retries,
"Number of times to attempt locking the buffer", NULL, 0},
{"RESTOURE_RETRIES", AUD_OPT_INT, &conf.restore_retries,
"Number of times to attempt restoring the buffer", NULL, 0},
{"GETSTATUS_RETRIES", AUD_OPT_INT, &conf.getstatus_retries,
"Number of times to attempt getting status of the buffer", NULL, 0},
{"SET_PRIMARY", AUD_OPT_BOOL, &conf.set_primary,
"Set the parameters of primary buffer", NULL, 0},
{"LATENCY_MILLIS", AUD_OPT_INT, &conf.latency_millis,
"(undocumented)", NULL, 0},
{"PRIMARY_FREQ", AUD_OPT_INT, &conf.settings.freq,
"Primary buffer frequency", NULL, 0},
{"PRIMARY_CHANNELS", AUD_OPT_INT, &conf.settings.nchannels,
"Primary buffer number of channels (1 - mono, 2 - stereo)", NULL, 0},
{"PRIMARY_FMT", AUD_OPT_FMT, &conf.settings.fmt,
"Primary buffer format", NULL, 0},
{"BUFSIZE_OUT", AUD_OPT_INT, &conf.bufsize_out,
"(undocumented)", NULL, 0},
{"BUFSIZE_IN", AUD_OPT_INT, &conf.bufsize_in,
"(undocumented)", NULL, 0},
{NULL, 0, NULL, NULL, NULL, 0}
};
static struct audio_pcm_ops dsound_pcm_ops = {
.init_out = dsound_init_out,
.fini_out = dsound_fini_out,
.run_out = dsound_run_out,
.write = dsound_write,
.ctl_out = dsound_ctl_out,
dsound_init_out,
dsound_fini_out,
dsound_run_out,
dsound_write,
dsound_ctl_out,
.init_in = dsound_init_in,
.fini_in = dsound_fini_in,
.run_in = dsound_run_in,
.read = dsound_read,
.ctl_in = dsound_ctl_in
dsound_init_in,
dsound_fini_in,
dsound_run_in,
dsound_read,
dsound_ctl_in
};
struct audio_driver dsound_audio_driver = {
.name = "dsound",
.descr = "DirectSound http://wikipedia.org/wiki/DirectSound",
.options = dsound_options,
.init = dsound_audio_init,
.fini = dsound_audio_fini,
.pcm_ops = &dsound_pcm_ops,
.can_be_default = 1,
.max_voices_out = INT_MAX,
.max_voices_in = 1,
.voice_size_out = sizeof (DSoundVoiceOut),
.voice_size_in = sizeof (DSoundVoiceIn)
INIT_FIELD (name = ) "dsound",
INIT_FIELD (descr = )
"DirectSound http://wikipedia.org/wiki/DirectSound",
INIT_FIELD (options = ) dsound_options,
INIT_FIELD (init = ) dsound_audio_init,
INIT_FIELD (fini = ) dsound_audio_fini,
INIT_FIELD (pcm_ops = ) &dsound_pcm_ops,
INIT_FIELD (can_be_default = ) 1,
INIT_FIELD (max_voices_out = ) INT_MAX,
INIT_FIELD (max_voices_in = ) 1,
INIT_FIELD (voice_size_out = ) sizeof (DSoundVoiceOut),
INIT_FIELD (voice_size_in = ) sizeof (DSoundVoiceIn)
};

View File

@@ -24,6 +24,7 @@
#include <esd.h>
#include "qemu-common.h"
#include "audio.h"
#include <signal.h>
#define AUDIO_CAP "esd"
#include "audio_int.h"
@@ -57,8 +58,10 @@ static struct {
char *dac_host;
char *adc_host;
} conf = {
.samples = 1024,
.divisor = 2,
1024,
2,
NULL,
NULL
};
static void GCC_FMT_ATTR (2, 3) qesd_logerr (int err, const char *fmt, ...)
@@ -130,7 +133,7 @@ static void *qesd_thread_out (void *arg)
int wsamples = written >> hw->info.shift;
int wbytes = wsamples << hw->info.shift;
if (wbytes != written) {
dolog ("warning: Misaligned write %d (requested %zd), "
dolog ("warning: Misaligned write %d (requested %d), "
"alignment %d\n",
wbytes, written, hw->info.align + 1);
}
@@ -157,15 +160,16 @@ static void *qesd_thread_out (void *arg)
return NULL;
}
static int qesd_run_out (HWVoiceOut *hw, int live)
static int qesd_run_out (HWVoiceOut *hw)
{
int decr;
int live, decr;
ESDVoiceOut *esd = (ESDVoiceOut *) hw;
if (audio_pt_lock (&esd->pt, AUDIO_FUNC)) {
return 0;
}
live = audio_pcm_hw_get_live_out (hw);
decr = audio_MIN (live, esd->decr);
esd->decr -= decr;
esd->live = live - decr;
@@ -189,6 +193,10 @@ static int qesd_init_out (HWVoiceOut *hw, struct audsettings *as)
ESDVoiceOut *esd = (ESDVoiceOut *) hw;
struct audsettings obt_as = *as;
int esdfmt = ESD_STREAM | ESD_PLAY;
int err;
sigset_t set, old_set;
sigfillset (&set);
esdfmt |= (as->nchannels == 2) ? ESD_STEREO : ESD_MONO;
switch (as->fmt) {
@@ -226,25 +234,43 @@ static int qesd_init_out (HWVoiceOut *hw, struct audsettings *as)
return -1;
}
esd->fd = esd_play_stream (esdfmt, as->freq, conf.dac_host, NULL);
if (esd->fd < 0) {
qesd_logerr (errno, "esd_play_stream failed\n");
esd->fd = -1;
err = pthread_sigmask (SIG_BLOCK, &set, &old_set);
if (err) {
qesd_logerr (err, "pthread_sigmask failed\n");
goto fail1;
}
if (audio_pt_init (&esd->pt, qesd_thread_out, esd, AUDIO_CAP, AUDIO_FUNC)) {
esd->fd = esd_play_stream (esdfmt, as->freq, conf.dac_host, NULL);
if (esd->fd < 0) {
qesd_logerr (errno, "esd_play_stream failed\n");
goto fail2;
}
if (audio_pt_init (&esd->pt, qesd_thread_out, esd, AUDIO_CAP, AUDIO_FUNC)) {
goto fail3;
}
err = pthread_sigmask (SIG_SETMASK, &old_set, NULL);
if (err) {
qesd_logerr (err, "pthread_sigmask(restore) failed\n");
}
return 0;
fail2:
fail3:
if (close (esd->fd)) {
qesd_logerr (errno, "%s: close on esd socket(%d) failed\n",
AUDIO_FUNC, esd->fd);
}
esd->fd = -1;
fail2:
err = pthread_sigmask (SIG_SETMASK, &old_set, NULL);
if (err) {
qesd_logerr (err, "pthread_sigmask(restore) failed\n");
}
fail1:
qemu_free (esd->pcm_buf);
esd->pcm_buf = NULL;
@@ -337,7 +363,7 @@ static void *qesd_thread_in (void *arg)
int rsamples = nread >> hw->info.shift;
int rbytes = rsamples << hw->info.shift;
if (rbytes != nread) {
dolog ("warning: Misaligned write %d (requested %zd), "
dolog ("warning: Misaligned write %d (requested %d), "
"alignment %d\n",
rbytes, nread, hw->info.align + 1);
}
@@ -346,7 +372,8 @@ static void *qesd_thread_in (void *arg)
break;
}
hw->conv (hw->conv_buf + wpos, buf, nread >> hw->info.shift);
hw->conv (hw->conv_buf + wpos, buf, nread >> hw->info.shift,
&nominal_volume);
wpos = (wpos + chunk) % hw->samples;
to_grab -= chunk;
}
@@ -399,6 +426,10 @@ static int qesd_init_in (HWVoiceIn *hw, struct audsettings *as)
ESDVoiceIn *esd = (ESDVoiceIn *) hw;
struct audsettings obt_as = *as;
int esdfmt = ESD_STREAM | ESD_RECORD;
int err;
sigset_t set, old_set;
sigfillset (&set);
esdfmt |= (as->nchannels == 2) ? ESD_STEREO : ESD_MONO;
switch (as->fmt) {
@@ -433,25 +464,44 @@ static int qesd_init_in (HWVoiceIn *hw, struct audsettings *as)
return -1;
}
esd->fd = esd_record_stream (esdfmt, as->freq, conf.adc_host, NULL);
if (esd->fd < 0) {
qesd_logerr (errno, "esd_record_stream failed\n");
esd->fd = -1;
err = pthread_sigmask (SIG_BLOCK, &set, &old_set);
if (err) {
qesd_logerr (err, "pthread_sigmask failed\n");
goto fail1;
}
if (audio_pt_init (&esd->pt, qesd_thread_in, esd, AUDIO_CAP, AUDIO_FUNC)) {
esd->fd = esd_record_stream (esdfmt, as->freq, conf.adc_host, NULL);
if (esd->fd < 0) {
qesd_logerr (errno, "esd_record_stream failed\n");
goto fail2;
}
if (audio_pt_init (&esd->pt, qesd_thread_in, esd, AUDIO_CAP, AUDIO_FUNC)) {
goto fail3;
}
err = pthread_sigmask (SIG_SETMASK, &old_set, NULL);
if (err) {
qesd_logerr (err, "pthread_sigmask(restore) failed\n");
}
return 0;
fail2:
fail3:
if (close (esd->fd)) {
qesd_logerr (errno, "%s: close on esd socket(%d) failed\n",
AUDIO_FUNC, esd->fd);
}
esd->fd = -1;
fail2:
err = pthread_sigmask (SIG_SETMASK, &old_set, NULL);
if (err) {
qesd_logerr (err, "pthread_sigmask(restore) failed\n");
}
fail1:
qemu_free (esd->pcm_buf);
esd->pcm_buf = NULL;
@@ -501,57 +551,46 @@ static void qesd_audio_fini (void *opaque)
}
struct audio_option qesd_options[] = {
{
.name = "SAMPLES",
.tag = AUD_OPT_INT,
.valp = &conf.samples,
.descr = "buffer size in samples"
},
{
.name = "DIVISOR",
.tag = AUD_OPT_INT,
.valp = &conf.divisor,
.descr = "threshold divisor"
},
{
.name = "DAC_HOST",
.tag = AUD_OPT_STR,
.valp = &conf.dac_host,
.descr = "playback host"
},
{
.name = "ADC_HOST",
.tag = AUD_OPT_STR,
.valp = &conf.adc_host,
.descr = "capture host"
},
{ /* End of list */ }
{"SAMPLES", AUD_OPT_INT, &conf.samples,
"buffer size in samples", NULL, 0},
{"DIVISOR", AUD_OPT_INT, &conf.divisor,
"threshold divisor", NULL, 0},
{"DAC_HOST", AUD_OPT_STR, &conf.dac_host,
"playback host", NULL, 0},
{"ADC_HOST", AUD_OPT_STR, &conf.adc_host,
"capture host", NULL, 0},
{NULL, 0, NULL, NULL, NULL, 0}
};
static struct audio_pcm_ops qesd_pcm_ops = {
.init_out = qesd_init_out,
.fini_out = qesd_fini_out,
.run_out = qesd_run_out,
.write = qesd_write,
.ctl_out = qesd_ctl_out,
qesd_init_out,
qesd_fini_out,
qesd_run_out,
qesd_write,
qesd_ctl_out,
.init_in = qesd_init_in,
.fini_in = qesd_fini_in,
.run_in = qesd_run_in,
.read = qesd_read,
.ctl_in = qesd_ctl_in,
qesd_init_in,
qesd_fini_in,
qesd_run_in,
qesd_read,
qesd_ctl_in,
};
struct audio_driver esd_audio_driver = {
.name = "esd",
.descr = "http://en.wikipedia.org/wiki/Esound",
.options = qesd_options,
.init = qesd_audio_init,
.fini = qesd_audio_fini,
.pcm_ops = &qesd_pcm_ops,
.can_be_default = 0,
.max_voices_out = INT_MAX,
.max_voices_in = INT_MAX,
.voice_size_out = sizeof (ESDVoiceOut),
.voice_size_in = sizeof (ESDVoiceIn)
INIT_FIELD (name = ) "esd",
INIT_FIELD (descr = )
"http://en.wikipedia.org/wiki/Esound",
INIT_FIELD (options = ) qesd_options,
INIT_FIELD (init = ) qesd_audio_init,
INIT_FIELD (fini = ) qesd_audio_fini,
INIT_FIELD (pcm_ops = ) &qesd_pcm_ops,
INIT_FIELD (can_be_default = ) 0,
INIT_FIELD (max_voices_out = ) INT_MAX,
INIT_FIELD (max_voices_in = ) INT_MAX,
INIT_FIELD (voice_size_out = ) sizeof (ESDVoiceOut),
INIT_FIELD (voice_size_in = ) sizeof (ESDVoiceIn)
};

View File

@@ -47,11 +47,16 @@ static struct {
int freq;
int nb_channels;
int bufsize;
int threshold;
int broken_adc;
} conf = {
.nb_samples = 2048 * 2,
.freq = 44100,
.nb_channels = 2,
NULL,
2048 * 2,
44100,
2,
0,
0,
0
};
static void GCC_FMT_ATTR (1, 2) fmod_logerr (const char *fmt, ...)
@@ -224,15 +229,24 @@ static int fmod_lock_sample (
return 0;
}
static int fmod_run_out (HWVoiceOut *hw, int live)
static int fmod_run_out (HWVoiceOut *hw)
{
FMODVoiceOut *fmd = (FMODVoiceOut *) hw;
int decr;
int live, decr;
void *p1 = 0, *p2 = 0;
unsigned int blen1 = 0, blen2 = 0;
unsigned int len1 = 0, len2 = 0;
int nb_live;
if (!hw->pending_disable) {
live = audio_pcm_hw_get_live_out2 (hw, &nb_live);
if (!live) {
return 0;
}
if (!hw->pending_disable
&& nb_live
&& (conf.threshold && live <= conf.threshold)) {
ldebug ("live=%d nb_live=%d\n", live, nb_live);
return 0;
}
@@ -488,10 +502,10 @@ static int fmod_run_in (HWVoiceIn *hw)
decr = len1 + len2;
if (p1 && blen1) {
hw->conv (hw->conv_buf + hw->wpos, p1, len1);
hw->conv (hw->conv_buf + hw->wpos, p1, len1, &nominal_volume);
}
if (p2 && len2) {
hw->conv (hw->conv_buf, p2, len2);
hw->conv (hw->conv_buf, p2, len2, &nominal_volume);
}
fmod_unlock_sample (fmd->fmod_sample, p1, p2, blen1, blen2);
@@ -503,27 +517,27 @@ static struct {
const char *name;
int type;
} drvtab[] = {
{ .name = "none", .type = FSOUND_OUTPUT_NOSOUND },
{"none", FSOUND_OUTPUT_NOSOUND},
#ifdef _WIN32
{ .name = "winmm", .type = FSOUND_OUTPUT_WINMM },
{ .name = "dsound", .type = FSOUND_OUTPUT_DSOUND },
{ .name = "a3d", .type = FSOUND_OUTPUT_A3D },
{ .name = "asio", .type = FSOUND_OUTPUT_ASIO },
{"winmm", FSOUND_OUTPUT_WINMM},
{"dsound", FSOUND_OUTPUT_DSOUND},
{"a3d", FSOUND_OUTPUT_A3D},
{"asio", FSOUND_OUTPUT_ASIO},
#endif
#ifdef __linux__
{ .name = "oss", .type = FSOUND_OUTPUT_OSS },
{ .name = "alsa", .type = FSOUND_OUTPUT_ALSA },
{ .name = "esd", .type = FSOUND_OUTPUT_ESD },
{"oss", FSOUND_OUTPUT_OSS},
{"alsa", FSOUND_OUTPUT_ALSA},
{"esd", FSOUND_OUTPUT_ESD},
#endif
#ifdef __APPLE__
{ .name = "mac", .type = FSOUND_OUTPUT_MAC },
{"mac", FSOUND_OUTPUT_MAC},
#endif
#if 0
{ .name = "xbox", .type = FSOUND_OUTPUT_XBOX },
{ .name = "ps2", .type = FSOUND_OUTPUT_PS2 },
{ .name = "gcube", .type = FSOUND_OUTPUT_GC },
{"xbox", FSOUND_OUTPUT_XBOX},
{"ps2", FSOUND_OUTPUT_PS2},
{"gcube", FSOUND_OUTPUT_GC},
#endif
{ .name = "none-realtime", .type = FSOUND_OUTPUT_NOSOUND_NONREALTIME }
{"none-realtime", FSOUND_OUTPUT_NOSOUND_NONREALTIME}
};
static void *fmod_audio_init (void)
@@ -625,63 +639,48 @@ static void fmod_audio_fini (void *opaque)
}
static struct audio_option fmod_options[] = {
{
.name = "DRV",
.tag = AUD_OPT_STR,
.valp = &conf.drvname,
.descr = "FMOD driver"
},
{
.name = "FREQ",
.tag = AUD_OPT_INT,
.valp = &conf.freq,
.descr = "Default frequency"
},
{
.name = "SAMPLES",
.tag = AUD_OPT_INT,
.valp = &conf.nb_samples,
.descr = "Buffer size in samples"
},
{
.name = "CHANNELS",
.tag = AUD_OPT_INT,
.valp = &conf.nb_channels,
.descr = "Number of default channels (1 - mono, 2 - stereo)"
},
{
.name = "BUFSIZE",
.tag = AUD_OPT_INT,
.valp = &conf.bufsize,
.descr = "(undocumented)"
},
{ /* End of list */ }
{"DRV", AUD_OPT_STR, &conf.drvname,
"FMOD driver", NULL, 0},
{"FREQ", AUD_OPT_INT, &conf.freq,
"Default frequency", NULL, 0},
{"SAMPLES", AUD_OPT_INT, &conf.nb_samples,
"Buffer size in samples", NULL, 0},
{"CHANNELS", AUD_OPT_INT, &conf.nb_channels,
"Number of default channels (1 - mono, 2 - stereo)", NULL, 0},
{"BUFSIZE", AUD_OPT_INT, &conf.bufsize,
"(undocumented)", NULL, 0},
#if 0
{"THRESHOLD", AUD_OPT_INT, &conf.threshold,
"(undocumented)"},
#endif
{NULL, 0, NULL, NULL, NULL, 0}
};
static struct audio_pcm_ops fmod_pcm_ops = {
.init_out = fmod_init_out,
.fini_out = fmod_fini_out,
.run_out = fmod_run_out,
.write = fmod_write,
.ctl_out = fmod_ctl_out,
fmod_init_out,
fmod_fini_out,
fmod_run_out,
fmod_write,
fmod_ctl_out,
.init_in = fmod_init_in,
.fini_in = fmod_fini_in,
.run_in = fmod_run_in,
.read = fmod_read,
.ctl_in = fmod_ctl_in
fmod_init_in,
fmod_fini_in,
fmod_run_in,
fmod_read,
fmod_ctl_in
};
struct audio_driver fmod_audio_driver = {
.name = "fmod",
.descr = "FMOD 3.xx http://www.fmod.org",
.options = fmod_options,
.init = fmod_audio_init,
.fini = fmod_audio_fini,
.pcm_ops = &fmod_pcm_ops,
.can_be_default = 1,
.max_voices_out = INT_MAX,
.max_voices_in = INT_MAX,
.voice_size_out = sizeof (FMODVoiceOut),
.voice_size_in = sizeof (FMODVoiceIn)
INIT_FIELD (name = ) "fmod",
INIT_FIELD (descr = ) "FMOD 3.xx http://www.fmod.org",
INIT_FIELD (options = ) fmod_options,
INIT_FIELD (init = ) fmod_audio_init,
INIT_FIELD (fini = ) fmod_audio_fini,
INIT_FIELD (pcm_ops = ) &fmod_pcm_ops,
INIT_FIELD (can_be_default = ) 1,
INIT_FIELD (max_voices_out = ) INT_MAX,
INIT_FIELD (max_voices_in = ) INT_MAX,
INIT_FIELD (voice_size_out = ) sizeof (FMODVoiceOut),
INIT_FIELD (voice_size_in = ) sizeof (FMODVoiceIn)
};

View File

@@ -123,7 +123,7 @@
#undef IN_T
#undef SHIFT
/* Unsigned 32 bit */
/* Unsigned 16 bit */
#define IN_T uint32_t
#define IN_MIN 0
#define IN_MAX UINT32_MAX
@@ -333,28 +333,3 @@ void mixeng_clear (struct st_sample *buf, int len)
{
memset (buf, 0, len * sizeof (struct st_sample));
}
void mixeng_volume (struct st_sample *buf, int len, struct mixeng_volume *vol)
{
#ifdef CONFIG_MIXEMU
if (vol->mute) {
mixeng_clear (buf, len);
return;
}
while (len--) {
#ifdef FLOAT_MIXENG
buf->l = buf->l * vol->l;
buf->r = buf->r * vol->r;
#else
buf->l = (buf->l * vol->l) >> 32;
buf->r = (buf->r * vol->r) >> 32;
#endif
buf += 1;
}
#else
(void) buf;
(void) len;
(void) vol;
#endif
}

View File

@@ -27,13 +27,14 @@
#ifdef FLOAT_MIXENG
typedef float mixeng_real;
struct mixeng_volume { int mute; mixeng_real r; mixeng_real l; };
struct st_sample { mixeng_real l; mixeng_real r; };
struct mixeng_sample { mixeng_real l; mixeng_real r; };
#else
struct mixeng_volume { int mute; int64_t r; int64_t l; };
struct st_sample { int64_t l; int64_t r; };
#endif
typedef void (t_sample) (struct st_sample *dst, const void *src, int samples);
typedef void (t_sample) (struct st_sample *dst, const void *src,
int samples, struct mixeng_volume *vol);
typedef void (f_sample) (void *dst, const struct st_sample *src, int samples);
extern t_sample *mixeng_conv[2][2][2][3];
@@ -46,6 +47,5 @@ void st_rate_flow_mix (void *opaque, struct st_sample *ibuf, struct st_sample *o
int *isamp, int *osamp);
void st_rate_stop (void *opaque);
void mixeng_clear (struct st_sample *buf, int len);
void mixeng_volume (struct st_sample *buf, int len, struct mixeng_volume *vol);
#endif /* mixeng.h */

View File

@@ -31,6 +31,16 @@
#define HALF (IN_MAX >> 1)
#endif
#ifdef CONFIG_MIXEMU
#ifdef FLOAT_MIXENG
#define VOL(a, b) ((a) * (b))
#else
#define VOL(a, b) ((a) * (b)) >> 32
#endif
#else
#define VOL(a, b) a
#endif
#define ET glue (ENDIAN_CONVERSION, glue (_, IN_T))
#ifdef FLOAT_MIXENG
@@ -99,26 +109,40 @@ static inline IN_T glue (clip_, ET) (int64_t v)
#endif
static void glue (glue (conv_, ET), _to_stereo)
(struct st_sample *dst, const void *src, int samples)
(struct st_sample *dst, const void *src, int samples, struct mixeng_volume *vol)
{
struct st_sample *out = dst;
IN_T *in = (IN_T *) src;
#ifdef CONFIG_MIXEMU
if (vol->mute) {
mixeng_clear (dst, samples);
return;
}
#else
(void) vol;
#endif
while (samples--) {
out->l = glue (conv_, ET) (*in++);
out->r = glue (conv_, ET) (*in++);
out->l = VOL (glue (conv_, ET) (*in++), vol->l);
out->r = VOL (glue (conv_, ET) (*in++), vol->r);
out += 1;
}
}
static void glue (glue (conv_, ET), _to_mono)
(struct st_sample *dst, const void *src, int samples)
(struct st_sample *dst, const void *src, int samples, struct mixeng_volume *vol)
{
struct st_sample *out = dst;
IN_T *in = (IN_T *) src;
#ifdef CONFIG_MIXEMU
if (vol->mute) {
mixeng_clear (dst, samples);
return;
}
#else
(void) vol;
#endif
while (samples--) {
out->l = glue (conv_, ET) (in[0]);
out->l = VOL (glue (conv_, ET) (in[0]), vol->l);
out->r = out->l;
out += 1;
in += 1;
@@ -150,3 +174,4 @@ static void glue (glue (clip_, ET), _from_mono)
#undef ET
#undef HALF
#undef VOL

View File

@@ -38,17 +38,22 @@ typedef struct NoVoiceIn {
int64_t old_ticks;
} NoVoiceIn;
static int no_run_out (HWVoiceOut *hw, int live)
static int no_run_out (HWVoiceOut *hw)
{
NoVoiceOut *no = (NoVoiceOut *) hw;
int decr, samples;
int live, decr, samples;
int64_t now;
int64_t ticks;
int64_t bytes;
live = audio_pcm_hw_get_live_out (&no->hw);
if (!live) {
return 0;
}
now = qemu_get_clock (vm_clock);
ticks = now - no->old_ticks;
bytes = muldiv64 (ticks, hw->info.bytes_per_second, get_ticks_per_sec ());
bytes = (ticks * hw->info.bytes_per_second) / ticks_per_sec;
bytes = audio_MIN (bytes, INT_MAX);
samples = bytes >> hw->info.shift;
@@ -104,8 +109,7 @@ static int no_run_in (HWVoiceIn *hw)
if (dead) {
int64_t now = qemu_get_clock (vm_clock);
int64_t ticks = now - no->old_ticks;
int64_t bytes =
muldiv64 (ticks, hw->info.bytes_per_second, get_ticks_per_sec ());
int64_t bytes = (ticks * hw->info.bytes_per_second) / ticks_per_sec;
no->old_ticks = now;
bytes = audio_MIN (bytes, INT_MAX);
@@ -117,14 +121,11 @@ static int no_run_in (HWVoiceIn *hw)
static int no_read (SWVoiceIn *sw, void *buf, int size)
{
/* use custom code here instead of audio_pcm_sw_read() to avoid
* useless resampling/mixing */
int samples = size >> sw->info.shift;
int total = sw->hw->total_samples_captured - sw->total_hw_samples_acquired;
int to_clear = audio_MIN (samples, total);
sw->total_hw_samples_acquired += total;
audio_pcm_info_clear_buf (&sw->info, buf, to_clear);
return to_clear << sw->info.shift;
return to_clear;
}
static int no_ctl_in (HWVoiceIn *hw, int cmd, ...)
@@ -145,29 +146,29 @@ static void no_audio_fini (void *opaque)
}
static struct audio_pcm_ops no_pcm_ops = {
.init_out = no_init_out,
.fini_out = no_fini_out,
.run_out = no_run_out,
.write = no_write,
.ctl_out = no_ctl_out,
no_init_out,
no_fini_out,
no_run_out,
no_write,
no_ctl_out,
.init_in = no_init_in,
.fini_in = no_fini_in,
.run_in = no_run_in,
.read = no_read,
.ctl_in = no_ctl_in
no_init_in,
no_fini_in,
no_run_in,
no_read,
no_ctl_in
};
struct audio_driver no_audio_driver = {
.name = "none",
.descr = "Timer based audio emulation",
.options = NULL,
.init = no_audio_init,
.fini = no_audio_fini,
.pcm_ops = &no_pcm_ops,
.can_be_default = 1,
.max_voices_out = INT_MAX,
.max_voices_in = INT_MAX,
.voice_size_out = sizeof (NoVoiceOut),
.voice_size_in = sizeof (NoVoiceIn)
INIT_FIELD (name = ) "none",
INIT_FIELD (descr = ) "Timer based audio emulation",
INIT_FIELD (options = ) NULL,
INIT_FIELD (init = ) no_audio_init,
INIT_FIELD (fini = ) no_audio_fini,
INIT_FIELD (pcm_ops = ) &no_pcm_ops,
INIT_FIELD (can_be_default = ) 1,
INIT_FIELD (max_voices_out = ) INT_MAX,
INIT_FIELD (max_voices_in = ) INT_MAX,
INIT_FIELD (voice_size_out = ) sizeof (NoVoiceOut),
INIT_FIELD (voice_size_in = ) sizeof (NoVoiceIn)
};

View File

@@ -31,26 +31,19 @@
#include <sys/soundcard.h>
#endif
#include "qemu-common.h"
#include "host-utils.h"
#include "qemu-char.h"
#include "audio.h"
#define AUDIO_CAP "oss"
#include "audio_int.h"
#if defined OSS_GETVERSION && defined SNDCTL_DSP_POLICY
#define USE_DSP_POLICY
#endif
typedef struct OSSVoiceOut {
HWVoiceOut hw;
void *pcm_buf;
int fd;
int wpos;
int nfrags;
int fragsize;
int mmapped;
int pending;
int old_optr;
} OSSVoiceOut;
typedef struct OSSVoiceIn {
@@ -59,6 +52,7 @@ typedef struct OSSVoiceIn {
int fd;
int nfrags;
int fragsize;
int old_optr;
} OSSVoiceIn;
static struct {
@@ -68,17 +62,13 @@ static struct {
const char *devpath_out;
const char *devpath_in;
int debug;
int exclusive;
int policy;
} conf = {
.try_mmap = 0,
.nfrags = 4,
.fragsize = 4096,
.devpath_out = "/dev/dsp",
.devpath_in = "/dev/dsp",
.debug = 0,
.exclusive = 0,
.policy = 5
.debug = 0
};
struct oss_params {
@@ -120,48 +110,19 @@ static void GCC_FMT_ATTR (3, 4) oss_logerr2 (
static void oss_anal_close (int *fdp)
{
int err;
qemu_set_fd_handler (*fdp, NULL, NULL, NULL);
err = close (*fdp);
int err = close (*fdp);
if (err) {
oss_logerr (errno, "Failed to close file(fd=%d)\n", *fdp);
}
*fdp = -1;
}
static void oss_helper_poll_out (void *opaque)
{
(void) opaque;
audio_run ("oss_poll_out");
}
static void oss_helper_poll_in (void *opaque)
{
(void) opaque;
audio_run ("oss_poll_in");
}
static int oss_poll_out (HWVoiceOut *hw)
{
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
return qemu_set_fd_handler (oss->fd, NULL, oss_helper_poll_out, NULL);
}
static int oss_poll_in (HWVoiceIn *hw)
{
OSSVoiceIn *oss = (OSSVoiceIn *) hw;
return qemu_set_fd_handler (oss->fd, oss_helper_poll_in, NULL, NULL);
}
static int oss_write (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write (sw, buf, len);
}
static int aud_to_ossfmt (audfmt_e fmt, int endianness)
static int aud_to_ossfmt (audfmt_e fmt)
{
switch (fmt) {
case AUD_FMT_S8:
@@ -171,20 +132,10 @@ static int aud_to_ossfmt (audfmt_e fmt, int endianness)
return AFMT_U8;
case AUD_FMT_S16:
if (endianness) {
return AFMT_S16_BE;
}
else {
return AFMT_S16_LE;
}
return AFMT_S16_LE;
case AUD_FMT_U16:
if (endianness) {
return AFMT_U16_BE;
}
else {
return AFMT_U16_LE;
}
return AFMT_U16_LE;
default:
dolog ("Internal logic error: Bad audio format %d\n", fmt);
@@ -250,46 +201,17 @@ static void oss_dump_info (struct oss_params *req, struct oss_params *obt)
}
#endif
#ifdef USE_DSP_POLICY
static int oss_get_version (int fd, int *version, const char *typ)
{
if (ioctl (fd, OSS_GETVERSION, &version)) {
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
/*
* Looks like atm (20100109) FreeBSD knows OSS_GETVERSION
* since 7.x, but currently only on the mixer device (or in
* the Linuxolator), and in the native version that part of
* the code is in fact never reached so the ioctl fails anyway.
* Until this is fixed, just check the errno and if its what
* FreeBSD's sound drivers return atm assume they are new enough.
*/
if (errno == EINVAL) {
*version = 0x040000;
return 0;
}
#endif
oss_logerr2 (errno, typ, "Failed to get OSS version\n");
return -1;
}
return 0;
}
#endif
static int oss_open (int in, struct oss_params *req,
struct oss_params *obt, int *pfd)
{
int fd;
int oflags = conf.exclusive ? O_EXCL : 0;
int mmmmssss;
audio_buf_info abinfo;
int fmt, freq, nchannels;
int setfragment = 1;
const char *dspname = in ? conf.devpath_in : conf.devpath_out;
const char *typ = in ? "ADC" : "DAC";
/* Kludge needed to have working mmap on Linux */
oflags |= conf.try_mmap ? O_RDWR : (in ? O_RDONLY : O_WRONLY);
fd = open (dspname, oflags | O_NONBLOCK);
fd = open (dspname, (in ? O_RDONLY : O_WRONLY) | O_NONBLOCK);
if (-1 == fd) {
oss_logerr2 (errno, typ, "Failed to open `%s'\n", dspname);
return -1;
@@ -320,36 +242,11 @@ static int oss_open (int in, struct oss_params *req,
goto err;
}
#ifdef USE_DSP_POLICY
if (conf.policy >= 0) {
int version;
if (!oss_get_version (fd, &version, typ)) {
if (conf.debug) {
dolog ("OSS version = %#x\n", version);
}
if (version >= 0x040000) {
int policy = conf.policy;
if (ioctl (fd, SNDCTL_DSP_POLICY, &policy)) {
oss_logerr2 (errno, typ,
"Failed to set timing policy to %d\n",
conf.policy);
goto err;
}
setfragment = 0;
}
}
}
#endif
if (setfragment) {
int mmmmssss = (req->nfrags << 16) | ctz32 (req->fragsize);
if (ioctl (fd, SNDCTL_DSP_SETFRAGMENT, &mmmmssss)) {
oss_logerr2 (errno, typ, "Failed to set buffer length (%d, %d)\n",
req->nfrags, req->fragsize);
goto err;
}
mmmmssss = (req->nfrags << 16) | lsbindex (req->fragsize);
if (ioctl (fd, SNDCTL_DSP_SETFRAGMENT, &mmmmssss)) {
oss_logerr2 (errno, typ, "Failed to set buffer length (%d, %d)\n",
req->nfrags, req->fragsize);
goto err;
}
if (ioctl (fd, in ? SNDCTL_DSP_GETISPACE : SNDCTL_DSP_GETOSPACE, &abinfo)) {
@@ -391,58 +288,26 @@ static int oss_open (int in, struct oss_params *req,
return -1;
}
static void oss_write_pending (OSSVoiceOut *oss)
{
HWVoiceOut *hw = &oss->hw;
if (oss->mmapped) {
return;
}
while (oss->pending) {
int samples_written;
ssize_t bytes_written;
int samples_till_end = hw->samples - oss->wpos;
int samples_to_write = audio_MIN (oss->pending, samples_till_end);
int bytes_to_write = samples_to_write << hw->info.shift;
void *pcm = advance (oss->pcm_buf, oss->wpos << hw->info.shift);
bytes_written = write (oss->fd, pcm, bytes_to_write);
if (bytes_written < 0) {
if (errno != EAGAIN) {
oss_logerr (errno, "failed to write %d bytes\n",
bytes_to_write);
}
break;
}
if (bytes_written & hw->info.align) {
dolog ("misaligned write asked for %d, but got %zd\n",
bytes_to_write, bytes_written);
return;
}
samples_written = bytes_written >> hw->info.shift;
oss->pending -= samples_written;
oss->wpos = (oss->wpos + samples_written) % hw->samples;
if (bytes_written - bytes_to_write) {
break;
}
}
}
static int oss_run_out (HWVoiceOut *hw, int live)
static int oss_run_out (HWVoiceOut *hw)
{
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
int err, decr;
int err, rpos, live, decr;
int samples;
uint8_t *dst;
struct st_sample *src;
struct audio_buf_info abinfo;
struct count_info cntinfo;
int bufsize;
live = audio_pcm_hw_get_live_out (hw);
if (!live) {
return 0;
}
bufsize = hw->samples << hw->info.shift;
if (oss->mmapped) {
int bytes, pos;
int bytes;
err = ioctl (oss->fd, SNDCTL_DSP_GETOPTR, &cntinfo);
if (err < 0) {
@@ -450,8 +315,20 @@ static int oss_run_out (HWVoiceOut *hw, int live)
return 0;
}
pos = hw->rpos << hw->info.shift;
bytes = audio_ring_dist (cntinfo.ptr, pos, bufsize);
if (cntinfo.ptr == oss->old_optr) {
if (abs (hw->samples - live) < 64) {
dolog ("warning: Overrun\n");
}
return 0;
}
if (cntinfo.ptr > oss->old_optr) {
bytes = cntinfo.ptr - oss->old_optr;
}
else {
bytes = bufsize + cntinfo.ptr - oss->old_optr;
}
decr = audio_MIN (bytes >> hw->info.shift, live);
}
else {
@@ -464,7 +341,7 @@ static int oss_run_out (HWVoiceOut *hw, int live)
if (abinfo.bytes > bufsize) {
if (conf.debug) {
dolog ("warning: Invalid available size, size=%d bufsize=%d\n"
"please report your OS/audio hw to av1474@comtv.ru\n",
"please report your OS/audio hw to malc@pulsesoft.com\n",
abinfo.bytes, bufsize);
}
abinfo.bytes = bufsize;
@@ -484,10 +361,53 @@ static int oss_run_out (HWVoiceOut *hw, int live)
}
}
decr = audio_pcm_hw_clip_out (hw, oss->pcm_buf, decr, oss->pending);
oss->pending += decr;
oss_write_pending (oss);
samples = decr;
rpos = hw->rpos;
while (samples) {
int left_till_end_samples = hw->samples - rpos;
int convert_samples = audio_MIN (samples, left_till_end_samples);
src = hw->mix_buf + rpos;
dst = advance (oss->pcm_buf, rpos << hw->info.shift);
hw->clip (dst, src, convert_samples);
if (!oss->mmapped) {
int written;
written = write (oss->fd, dst, convert_samples << hw->info.shift);
/* XXX: follow errno recommendations ? */
if (written == -1) {
oss_logerr (
errno,
"Failed to write %d bytes of audio data from %p\n",
convert_samples << hw->info.shift,
dst
);
continue;
}
if (written != convert_samples << hw->info.shift) {
int wsamples = written >> hw->info.shift;
int wbytes = wsamples << hw->info.shift;
if (wbytes != written) {
dolog ("warning: Misaligned write %d (requested %d), "
"alignment %d\n",
wbytes, written, hw->info.align + 1);
}
decr -= wsamples;
rpos = (rpos + wsamples) % hw->samples;
break;
}
}
rpos = (rpos + convert_samples) % hw->samples;
samples -= convert_samples;
}
if (oss->mmapped) {
oss->old_optr = cntinfo.ptr;
}
hw->rpos = rpos;
return decr;
}
@@ -526,7 +446,7 @@ static int oss_init_out (HWVoiceOut *hw, struct audsettings *as)
oss->fd = -1;
req.fmt = aud_to_ossfmt (as->fmt, as->endianness);
req.fmt = aud_to_ossfmt (as->fmt);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.fragsize = conf.fragsize;
@@ -561,7 +481,7 @@ static int oss_init_out (HWVoiceOut *hw, struct audsettings *as)
oss->mmapped = 0;
if (conf.try_mmap) {
oss->pcm_buf = mmap (
NULL,
0,
hw->samples << hw->info.shift,
PROT_READ | PROT_WRITE,
MAP_SHARED,
@@ -571,8 +491,7 @@ static int oss_init_out (HWVoiceOut *hw, struct audsettings *as)
if (oss->pcm_buf == MAP_FAILED) {
oss_logerr (errno, "Failed to map %d bytes of DAC\n",
hw->samples << hw->info.shift);
}
else {
} else {
int err;
int trig = 0;
if (ioctl (fd, SNDCTL_DSP_SETTRIGGER, &trig) < 0) {
@@ -627,48 +546,25 @@ static int oss_ctl_out (HWVoiceOut *hw, int cmd, ...)
int trig;
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
if (!oss->mmapped) {
return 0;
}
switch (cmd) {
case VOICE_ENABLE:
{
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
ldebug ("enabling voice\n");
if (poll_mode && oss_poll_out (hw)) {
poll_mode = 0;
}
hw->poll_mode = poll_mode;
if (!oss->mmapped) {
return 0;
}
audio_pcm_info_clear_buf (&hw->info, oss->pcm_buf, hw->samples);
trig = PCM_ENABLE_OUTPUT;
if (ioctl (oss->fd, SNDCTL_DSP_SETTRIGGER, &trig) < 0) {
oss_logerr (
errno,
"SNDCTL_DSP_SETTRIGGER PCM_ENABLE_OUTPUT failed\n"
);
return -1;
}
ldebug ("enabling voice\n");
audio_pcm_info_clear_buf (&hw->info, oss->pcm_buf, hw->samples);
trig = PCM_ENABLE_OUTPUT;
if (ioctl (oss->fd, SNDCTL_DSP_SETTRIGGER, &trig) < 0) {
oss_logerr (
errno,
"SNDCTL_DSP_SETTRIGGER PCM_ENABLE_OUTPUT failed\n"
);
return -1;
}
break;
case VOICE_DISABLE:
if (hw->poll_mode) {
qemu_set_fd_handler (oss->fd, NULL, NULL, NULL);
hw->poll_mode = 0;
}
if (!oss->mmapped) {
return 0;
}
ldebug ("disabling voice\n");
trig = 0;
if (ioctl (oss->fd, SNDCTL_DSP_SETTRIGGER, &trig) < 0) {
@@ -692,7 +588,7 @@ static int oss_init_in (HWVoiceIn *hw, struct audsettings *as)
oss->fd = -1;
req.fmt = aud_to_ossfmt (as->fmt, as->endianness);
req.fmt = aud_to_ossfmt (as->fmt);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.fragsize = conf.fragsize;
@@ -758,8 +654,8 @@ static int oss_run_in (HWVoiceIn *hw)
int add;
int len;
} bufs[2] = {
{ .add = hw->wpos, .len = 0 },
{ .add = 0, .len = 0 }
{ hw->wpos, 0 },
{ 0, 0 }
};
if (!dead) {
@@ -774,6 +670,7 @@ static int oss_run_in (HWVoiceIn *hw)
bufs[0].len = dead << hwshift;
}
for (i = 0; i < 2; ++i) {
ssize_t nread;
@@ -788,7 +685,8 @@ static int oss_run_in (HWVoiceIn *hw)
hw->info.align + 1);
}
read_samples += nread >> hwshift;
hw->conv (hw->conv_buf + bufs[i].add, p, nread >> hwshift);
hw->conv (hw->conv_buf + bufs[i].add, p, nread >> hwshift,
&nominal_volume);
}
if (bufs[i].len - nread) {
@@ -822,32 +720,8 @@ static int oss_read (SWVoiceIn *sw, void *buf, int size)
static int oss_ctl_in (HWVoiceIn *hw, int cmd, ...)
{
OSSVoiceIn *oss = (OSSVoiceIn *) hw;
switch (cmd) {
case VOICE_ENABLE:
{
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
if (poll_mode && oss_poll_in (hw)) {
poll_mode = 0;
}
hw->poll_mode = poll_mode;
}
break;
case VOICE_DISABLE:
if (hw->poll_mode) {
hw->poll_mode = 0;
qemu_set_fd_handler (oss->fd, NULL, NULL, NULL);
}
break;
}
(void) hw;
(void) cmd;
return 0;
}
@@ -862,83 +736,45 @@ static void oss_audio_fini (void *opaque)
}
static struct audio_option oss_options[] = {
{
.name = "FRAGSIZE",
.tag = AUD_OPT_INT,
.valp = &conf.fragsize,
.descr = "Fragment size in bytes"
},
{
.name = "NFRAGS",
.tag = AUD_OPT_INT,
.valp = &conf.nfrags,
.descr = "Number of fragments"
},
{
.name = "MMAP",
.tag = AUD_OPT_BOOL,
.valp = &conf.try_mmap,
.descr = "Try using memory mapped access"
},
{
.name = "DAC_DEV",
.tag = AUD_OPT_STR,
.valp = &conf.devpath_out,
.descr = "Path to DAC device"
},
{
.name = "ADC_DEV",
.tag = AUD_OPT_STR,
.valp = &conf.devpath_in,
.descr = "Path to ADC device"
},
{
.name = "EXCLUSIVE",
.tag = AUD_OPT_BOOL,
.valp = &conf.exclusive,
.descr = "Open device in exclusive mode (vmix wont work)"
},
#ifdef USE_DSP_POLICY
{
.name = "POLICY",
.tag = AUD_OPT_INT,
.valp = &conf.policy,
.descr = "Set the timing policy of the device, -1 to use fragment mode",
},
#endif
{
.name = "DEBUG",
.tag = AUD_OPT_BOOL,
.valp = &conf.debug,
.descr = "Turn on some debugging messages"
},
{ /* End of list */ }
{"FRAGSIZE", AUD_OPT_INT, &conf.fragsize,
"Fragment size in bytes", NULL, 0},
{"NFRAGS", AUD_OPT_INT, &conf.nfrags,
"Number of fragments", NULL, 0},
{"MMAP", AUD_OPT_BOOL, &conf.try_mmap,
"Try using memory mapped access", NULL, 0},
{"DAC_DEV", AUD_OPT_STR, &conf.devpath_out,
"Path to DAC device", NULL, 0},
{"ADC_DEV", AUD_OPT_STR, &conf.devpath_in,
"Path to ADC device", NULL, 0},
{"DEBUG", AUD_OPT_BOOL, &conf.debug,
"Turn on some debugging messages", NULL, 0},
{NULL, 0, NULL, NULL, NULL, 0}
};
static struct audio_pcm_ops oss_pcm_ops = {
.init_out = oss_init_out,
.fini_out = oss_fini_out,
.run_out = oss_run_out,
.write = oss_write,
.ctl_out = oss_ctl_out,
oss_init_out,
oss_fini_out,
oss_run_out,
oss_write,
oss_ctl_out,
.init_in = oss_init_in,
.fini_in = oss_fini_in,
.run_in = oss_run_in,
.read = oss_read,
.ctl_in = oss_ctl_in
oss_init_in,
oss_fini_in,
oss_run_in,
oss_read,
oss_ctl_in
};
struct audio_driver oss_audio_driver = {
.name = "oss",
.descr = "OSS http://www.opensound.com",
.options = oss_options,
.init = oss_audio_init,
.fini = oss_audio_fini,
.pcm_ops = &oss_pcm_ops,
.can_be_default = 1,
.max_voices_out = INT_MAX,
.max_voices_in = INT_MAX,
.voice_size_out = sizeof (OSSVoiceOut),
.voice_size_in = sizeof (OSSVoiceIn)
INIT_FIELD (name = ) "oss",
INIT_FIELD (descr = ) "OSS http://www.opensound.com",
INIT_FIELD (options = ) oss_options,
INIT_FIELD (init = ) oss_audio_init,
INIT_FIELD (fini = ) oss_audio_fini,
INIT_FIELD (pcm_ops = ) &oss_pcm_ops,
INIT_FIELD (can_be_default = ) 1,
INIT_FIELD (max_voices_out = ) INT_MAX,
INIT_FIELD (max_voices_in = ) INT_MAX,
INIT_FIELD (voice_size_out = ) sizeof (OSSVoiceOut),
INIT_FIELD (voice_size_in = ) sizeof (OSSVoiceIn)
};

View File

@@ -33,11 +33,16 @@ typedef struct {
static struct {
int samples;
int divisor;
char *server;
char *sink;
char *source;
} conf = {
.samples = 4096,
1024,
2,
NULL,
NULL,
NULL
};
static void GCC_FMT_ATTR (2, 3) qpa_logerr (int err, const char *fmt, ...)
@@ -55,6 +60,9 @@ static void *qpa_thread_out (void *arg)
{
PAVoiceOut *pa = arg;
HWVoiceOut *hw = &pa->hw;
int threshold;
threshold = conf.divisor ? hw->samples / conf.divisor : 0;
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return NULL;
@@ -68,7 +76,7 @@ static void *qpa_thread_out (void *arg)
goto exit;
}
if (pa->live > 0) {
if (pa->live > threshold) {
break;
}
@@ -77,8 +85,8 @@ static void *qpa_thread_out (void *arg)
}
}
decr = to_mix = audio_MIN (pa->live, conf.samples >> 2);
rpos = pa->rpos;
decr = to_mix = pa->live;
rpos = hw->rpos;
if (audio_pt_unlock (&pa->pt, AUDIO_FUNC)) {
return NULL;
@@ -115,15 +123,16 @@ static void *qpa_thread_out (void *arg)
return NULL;
}
static int qpa_run_out (HWVoiceOut *hw, int live)
static int qpa_run_out (HWVoiceOut *hw)
{
int decr;
int live, decr;
PAVoiceOut *pa = (PAVoiceOut *) hw;
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return 0;
}
live = audio_pcm_hw_get_live_out (hw);
decr = audio_MIN (live, pa->decr);
pa->decr -= decr;
pa->live = live - decr;
@@ -147,6 +156,9 @@ static void *qpa_thread_in (void *arg)
{
PAVoiceIn *pa = arg;
HWVoiceIn *hw = &pa->hw;
int threshold;
threshold = conf.divisor ? hw->samples / conf.divisor : 0;
if (audio_pt_lock (&pa->pt, AUDIO_FUNC)) {
return NULL;
@@ -160,7 +172,7 @@ static void *qpa_thread_in (void *arg)
goto exit;
}
if (pa->dead > 0) {
if (pa->dead > threshold) {
break;
}
@@ -169,8 +181,8 @@ static void *qpa_thread_in (void *arg)
}
}
incr = to_grab = audio_MIN (pa->dead, conf.samples >> 2);
wpos = pa->wpos;
incr = to_grab = pa->dead;
wpos = hw->wpos;
if (audio_pt_unlock (&pa->pt, AUDIO_FUNC)) {
return NULL;
@@ -187,7 +199,7 @@ static void *qpa_thread_in (void *arg)
return NULL;
}
hw->conv (hw->conv_buf + wpos, buf, chunk);
hw->conv (hw->conv_buf + wpos, buf, chunk, &nominal_volume);
wpos = (wpos + chunk) % hw->samples;
to_grab -= chunk;
}
@@ -287,7 +299,6 @@ static int qpa_init_out (HWVoiceOut *hw, struct audsettings *as)
{
int error;
static pa_sample_spec ss;
static pa_buffer_attr ba;
struct audsettings obt_as = *as;
PAVoiceOut *pa = (PAVoiceOut *) hw;
@@ -295,15 +306,6 @@ static int qpa_init_out (HWVoiceOut *hw, struct audsettings *as)
ss.channels = as->nchannels;
ss.rate = as->freq;
/*
* qemu audio tick runs at 250 Hz (by default), so processing
* data chunks worth 4 ms of sound should be a good fit.
*/
ba.tlength = pa_usec_to_bytes (4 * 1000, &ss);
ba.minreq = pa_usec_to_bytes (2 * 1000, &ss);
ba.maxlength = -1;
ba.prebuf = -1;
obt_as.fmt = pa_to_audfmt (ss.format, &obt_as.endianness);
pa->s = pa_simple_new (
@@ -314,7 +316,7 @@ static int qpa_init_out (HWVoiceOut *hw, struct audsettings *as)
"pcm.playback",
&ss,
NULL, /* channel map */
&ba, /* buffering attributes */
NULL, /* buffering attributes */
&error
);
if (!pa->s) {
@@ -325,7 +327,6 @@ static int qpa_init_out (HWVoiceOut *hw, struct audsettings *as)
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = conf.samples;
pa->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
pa->rpos = hw->rpos;
if (!pa->pcm_buf) {
dolog ("Could not allocate buffer (%d bytes)\n",
hw->samples << hw->info.shift);
@@ -339,7 +340,7 @@ static int qpa_init_out (HWVoiceOut *hw, struct audsettings *as)
return 0;
fail3:
qemu_free (pa->pcm_buf);
free (pa->pcm_buf);
pa->pcm_buf = NULL;
fail2:
pa_simple_free (pa->s);
@@ -380,7 +381,6 @@ static int qpa_init_in (HWVoiceIn *hw, struct audsettings *as)
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = conf.samples;
pa->pcm_buf = audio_calloc (AUDIO_FUNC, hw->samples, 1 << hw->info.shift);
pa->wpos = hw->wpos;
if (!pa->pcm_buf) {
dolog ("Could not allocate buffer (%d bytes)\n",
hw->samples << hw->info.shift);
@@ -394,7 +394,7 @@ static int qpa_init_in (HWVoiceIn *hw, struct audsettings *as)
return 0;
fail3:
qemu_free (pa->pcm_buf);
free (pa->pcm_buf);
pa->pcm_buf = NULL;
fail2:
pa_simple_free (pa->s);
@@ -469,57 +469,47 @@ static void qpa_audio_fini (void *opaque)
}
struct audio_option qpa_options[] = {
{
.name = "SAMPLES",
.tag = AUD_OPT_INT,
.valp = &conf.samples,
.descr = "buffer size in samples"
},
{
.name = "SERVER",
.tag = AUD_OPT_STR,
.valp = &conf.server,
.descr = "server address"
},
{
.name = "SINK",
.tag = AUD_OPT_STR,
.valp = &conf.sink,
.descr = "sink device name"
},
{
.name = "SOURCE",
.tag = AUD_OPT_STR,
.valp = &conf.source,
.descr = "source device name"
},
{ /* End of list */ }
{"SAMPLES", AUD_OPT_INT, &conf.samples,
"buffer size in samples", NULL, 0},
{"DIVISOR", AUD_OPT_INT, &conf.divisor,
"threshold divisor", NULL, 0},
{"SERVER", AUD_OPT_STR, &conf.server,
"server address", NULL, 0},
{"SINK", AUD_OPT_STR, &conf.sink,
"sink device name", NULL, 0},
{"SOURCE", AUD_OPT_STR, &conf.source,
"source device name", NULL, 0},
{NULL, 0, NULL, NULL, NULL, 0}
};
static struct audio_pcm_ops qpa_pcm_ops = {
.init_out = qpa_init_out,
.fini_out = qpa_fini_out,
.run_out = qpa_run_out,
.write = qpa_write,
.ctl_out = qpa_ctl_out,
.init_in = qpa_init_in,
.fini_in = qpa_fini_in,
.run_in = qpa_run_in,
.read = qpa_read,
.ctl_in = qpa_ctl_in
qpa_init_out,
qpa_fini_out,
qpa_run_out,
qpa_write,
qpa_ctl_out,
qpa_init_in,
qpa_fini_in,
qpa_run_in,
qpa_read,
qpa_ctl_in
};
struct audio_driver pa_audio_driver = {
.name = "pa",
.descr = "http://www.pulseaudio.org/",
.options = qpa_options,
.init = qpa_audio_init,
.fini = qpa_audio_fini,
.pcm_ops = &qpa_pcm_ops,
.can_be_default = 1,
.max_voices_out = INT_MAX,
.max_voices_in = INT_MAX,
.voice_size_out = sizeof (PAVoiceOut),
.voice_size_in = sizeof (PAVoiceIn)
INIT_FIELD (name = ) "pa",
INIT_FIELD (descr = ) "http://www.pulseaudio.org/",
INIT_FIELD (options = ) qpa_options,
INIT_FIELD (init = ) qpa_audio_init,
INIT_FIELD (fini = ) qpa_audio_fini,
INIT_FIELD (pcm_ops = ) &qpa_pcm_ops,
INIT_FIELD (can_be_default = ) 0,
INIT_FIELD (max_voices_out = ) INT_MAX,
INIT_FIELD (max_voices_in = ) INT_MAX,
INIT_FIELD (voice_size_out = ) sizeof (PAVoiceOut),
INIT_FIELD (voice_size_in = ) sizeof (PAVoiceIn)
};

View File

@@ -29,7 +29,7 @@
#ifndef _WIN32
#ifdef __sun__
#define _POSIX_PTHREAD_SEMANTICS 1
#elif defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__DragonFly__)
#elif defined(__OpenBSD__) || defined(__FreeBSD__)
#include <pthread.h>
#endif
#include <signal.h>
@@ -48,7 +48,7 @@ typedef struct SDLVoiceOut {
static struct {
int nb_samples;
} conf = {
.nb_samples = 1024
1024
};
static struct SDLAudioState {
@@ -115,19 +115,23 @@ static int sdl_unlock_and_post (SDLAudioState *s, const char *forfn)
return sdl_post (s, forfn);
}
static int aud_to_sdlfmt (audfmt_e fmt)
static int aud_to_sdlfmt (audfmt_e fmt, int *shift)
{
switch (fmt) {
case AUD_FMT_S8:
*shift = 0;
return AUDIO_S8;
case AUD_FMT_U8:
*shift = 0;
return AUDIO_U8;
case AUD_FMT_S16:
*shift = 1;
return AUDIO_S16LSB;
case AUD_FMT_U16:
*shift = 1;
return AUDIO_U16LSB;
default:
@@ -184,20 +188,11 @@ static int sdl_open (SDL_AudioSpec *req, SDL_AudioSpec *obt)
{
int status;
#ifndef _WIN32
int err;
sigset_t new, old;
/* Make sure potential threads created by SDL don't hog signals. */
err = sigfillset (&new);
if (err) {
dolog ("sdl_open: sigfillset failed: %s\n", strerror (errno));
return -1;
}
err = pthread_sigmask (SIG_BLOCK, &new, &old);
if (err) {
dolog ("sdl_open: pthread_sigmask failed: %s\n", strerror (err));
return -1;
}
sigfillset (&new);
pthread_sigmask (SIG_BLOCK, &new, &old);
#endif
status = SDL_OpenAudio (req, obt);
@@ -206,14 +201,7 @@ static int sdl_open (SDL_AudioSpec *req, SDL_AudioSpec *obt)
}
#ifndef _WIN32
err = pthread_sigmask (SIG_SETMASK, &old, NULL);
if (err) {
dolog ("sdl_open: pthread_sigmask (restore) failed: %s\n",
strerror (errno));
/* We have failed to restore original signal mask, all bets are off,
so exit the process */
exit (EXIT_FAILURE);
}
pthread_sigmask (SIG_SETMASK, &old, 0);
#endif
return status;
}
@@ -294,16 +282,18 @@ static int sdl_write_out (SWVoiceOut *sw, void *buf, int len)
return audio_pcm_sw_write (sw, buf, len);
}
static int sdl_run_out (HWVoiceOut *hw, int live)
static int sdl_run_out (HWVoiceOut *hw)
{
int decr;
int decr, live;
SDLVoiceOut *sdl = (SDLVoiceOut *) hw;
SDLAudioState *s = &glob_sdl;
if (sdl_lock (s, "sdl_run_out")) {
if (sdl_lock (s, "sdl_callback")) {
return 0;
}
live = audio_pcm_hw_get_live_out (hw);
if (sdl->decr > live) {
ldebug ("sdl->decr %d live %d sdl->live %d\n",
sdl->decr,
@@ -318,10 +308,10 @@ static int sdl_run_out (HWVoiceOut *hw, int live)
hw->rpos = sdl->rpos;
if (sdl->live > 0) {
sdl_unlock_and_post (s, "sdl_run_out");
sdl_unlock_and_post (s, "sdl_callback");
}
else {
sdl_unlock (s, "sdl_run_out");
sdl_unlock (s, "sdl_callback");
}
return decr;
}
@@ -338,13 +328,16 @@ static int sdl_init_out (HWVoiceOut *hw, struct audsettings *as)
SDLVoiceOut *sdl = (SDLVoiceOut *) hw;
SDLAudioState *s = &glob_sdl;
SDL_AudioSpec req, obt;
int shift;
int endianess;
int err;
audfmt_e effective_fmt;
struct audsettings obt_as;
shift <<= as->nchannels == 2;
req.freq = as->freq;
req.format = aud_to_sdlfmt (as->fmt);
req.format = aud_to_sdlfmt (as->fmt, &shift);
req.channels = as->nchannels;
req.samples = conf.nb_samples;
req.callback = sdl_callback;
@@ -427,33 +420,35 @@ static void sdl_audio_fini (void *opaque)
}
static struct audio_option sdl_options[] = {
{
.name = "SAMPLES",
.tag = AUD_OPT_INT,
.valp = &conf.nb_samples,
.descr = "Size of SDL buffer in samples"
},
{ /* End of list */ }
{"SAMPLES", AUD_OPT_INT, &conf.nb_samples,
"Size of SDL buffer in samples", NULL, 0},
{NULL, 0, NULL, NULL, NULL, 0}
};
static struct audio_pcm_ops sdl_pcm_ops = {
.init_out = sdl_init_out,
.fini_out = sdl_fini_out,
.run_out = sdl_run_out,
.write = sdl_write_out,
.ctl_out = sdl_ctl_out,
sdl_init_out,
sdl_fini_out,
sdl_run_out,
sdl_write_out,
sdl_ctl_out,
NULL,
NULL,
NULL,
NULL,
NULL
};
struct audio_driver sdl_audio_driver = {
.name = "sdl",
.descr = "SDL http://www.libsdl.org",
.options = sdl_options,
.init = sdl_audio_init,
.fini = sdl_audio_fini,
.pcm_ops = &sdl_pcm_ops,
.can_be_default = 1,
.max_voices_out = 1,
.max_voices_in = 0,
.voice_size_out = sizeof (SDLVoiceOut),
.voice_size_in = 0
INIT_FIELD (name = ) "sdl",
INIT_FIELD (descr = ) "SDL http://www.libsdl.org",
INIT_FIELD (options = ) sdl_options,
INIT_FIELD (init = ) sdl_audio_init,
INIT_FIELD (fini = ) sdl_audio_fini,
INIT_FIELD (pcm_ops = ) &sdl_pcm_ops,
INIT_FIELD (can_be_default = ) 1,
INIT_FIELD (max_voices_out = ) 1,
INIT_FIELD (max_voices_in = ) 0,
INIT_FIELD (voice_size_out = ) sizeof (SDLVoiceOut),
INIT_FIELD (voice_size_in = ) 0
};

View File

@@ -1,345 +0,0 @@
/*
* Copyright (C) 2010 Red Hat, Inc.
*
* maintained by Gerd Hoffmann <kraxel@redhat.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 or
* (at your option) version 3 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "hw/hw.h"
#include "qemu-timer.h"
#include "ui/qemu-spice.h"
#define AUDIO_CAP "spice"
#include "audio.h"
#include "audio_int.h"
#define LINE_IN_SAMPLES 1024
#define LINE_OUT_SAMPLES 1024
typedef struct SpiceRateCtl {
int64_t start_ticks;
int64_t bytes_sent;
} SpiceRateCtl;
typedef struct SpiceVoiceOut {
HWVoiceOut hw;
SpicePlaybackInstance sin;
SpiceRateCtl rate;
int active;
uint32_t *frame;
uint32_t *fpos;
uint32_t fsize;
} SpiceVoiceOut;
typedef struct SpiceVoiceIn {
HWVoiceIn hw;
SpiceRecordInstance sin;
SpiceRateCtl rate;
int active;
uint32_t samples[LINE_IN_SAMPLES];
} SpiceVoiceIn;
static const SpicePlaybackInterface playback_sif = {
.base.type = SPICE_INTERFACE_PLAYBACK,
.base.description = "playback",
.base.major_version = SPICE_INTERFACE_PLAYBACK_MAJOR,
.base.minor_version = SPICE_INTERFACE_PLAYBACK_MINOR,
};
static const SpiceRecordInterface record_sif = {
.base.type = SPICE_INTERFACE_RECORD,
.base.description = "record",
.base.major_version = SPICE_INTERFACE_RECORD_MAJOR,
.base.minor_version = SPICE_INTERFACE_RECORD_MINOR,
};
static void *spice_audio_init (void)
{
if (!using_spice) {
return NULL;
}
return &spice_audio_init;
}
static void spice_audio_fini (void *opaque)
{
/* nothing */
}
static void rate_start (SpiceRateCtl *rate)
{
memset (rate, 0, sizeof (*rate));
rate->start_ticks = qemu_get_clock (vm_clock);
}
static int rate_get_samples (struct audio_pcm_info *info, SpiceRateCtl *rate)
{
int64_t now;
int64_t ticks;
int64_t bytes;
int64_t samples;
now = qemu_get_clock (vm_clock);
ticks = now - rate->start_ticks;
bytes = muldiv64 (ticks, info->bytes_per_second, get_ticks_per_sec ());
samples = (bytes - rate->bytes_sent) >> info->shift;
if (samples < 0 || samples > 65536) {
fprintf (stderr, "Resetting rate control (%" PRId64 " samples)\n", samples);
rate_start (rate);
samples = 0;
}
rate->bytes_sent += samples << info->shift;
return samples;
}
/* playback */
static int line_out_init (HWVoiceOut *hw, struct audsettings *as)
{
SpiceVoiceOut *out = container_of (hw, SpiceVoiceOut, hw);
struct audsettings settings;
settings.freq = SPICE_INTERFACE_PLAYBACK_FREQ;
settings.nchannels = SPICE_INTERFACE_PLAYBACK_CHAN;
settings.fmt = AUD_FMT_S16;
settings.endianness = AUDIO_HOST_ENDIANNESS;
audio_pcm_init_info (&hw->info, &settings);
hw->samples = LINE_OUT_SAMPLES;
out->active = 0;
out->sin.base.sif = &playback_sif.base;
qemu_spice_add_interface (&out->sin.base);
return 0;
}
static void line_out_fini (HWVoiceOut *hw)
{
SpiceVoiceOut *out = container_of (hw, SpiceVoiceOut, hw);
spice_server_remove_interface (&out->sin.base);
}
static int line_out_run (HWVoiceOut *hw, int live)
{
SpiceVoiceOut *out = container_of (hw, SpiceVoiceOut, hw);
int rpos, decr;
int samples;
if (!live) {
return 0;
}
decr = rate_get_samples (&hw->info, &out->rate);
decr = audio_MIN (live, decr);
samples = decr;
rpos = hw->rpos;
while (samples) {
int left_till_end_samples = hw->samples - rpos;
int len = audio_MIN (samples, left_till_end_samples);
if (!out->frame) {
spice_server_playback_get_buffer (&out->sin, &out->frame, &out->fsize);
out->fpos = out->frame;
}
if (out->frame) {
len = audio_MIN (len, out->fsize);
hw->clip (out->fpos, hw->mix_buf + rpos, len);
out->fsize -= len;
out->fpos += len;
if (out->fsize == 0) {
spice_server_playback_put_samples (&out->sin, out->frame);
out->frame = out->fpos = NULL;
}
}
rpos = (rpos + len) % hw->samples;
samples -= len;
}
hw->rpos = rpos;
return decr;
}
static int line_out_write (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write (sw, buf, len);
}
static int line_out_ctl (HWVoiceOut *hw, int cmd, ...)
{
SpiceVoiceOut *out = container_of (hw, SpiceVoiceOut, hw);
switch (cmd) {
case VOICE_ENABLE:
if (out->active) {
break;
}
out->active = 1;
rate_start (&out->rate);
spice_server_playback_start (&out->sin);
break;
case VOICE_DISABLE:
if (!out->active) {
break;
}
out->active = 0;
if (out->frame) {
memset (out->fpos, 0, out->fsize << 2);
spice_server_playback_put_samples (&out->sin, out->frame);
out->frame = out->fpos = NULL;
}
spice_server_playback_stop (&out->sin);
break;
}
return 0;
}
/* record */
static int line_in_init (HWVoiceIn *hw, struct audsettings *as)
{
SpiceVoiceIn *in = container_of (hw, SpiceVoiceIn, hw);
struct audsettings settings;
settings.freq = SPICE_INTERFACE_RECORD_FREQ;
settings.nchannels = SPICE_INTERFACE_RECORD_CHAN;
settings.fmt = AUD_FMT_S16;
settings.endianness = AUDIO_HOST_ENDIANNESS;
audio_pcm_init_info (&hw->info, &settings);
hw->samples = LINE_IN_SAMPLES;
in->active = 0;
in->sin.base.sif = &record_sif.base;
qemu_spice_add_interface (&in->sin.base);
return 0;
}
static void line_in_fini (HWVoiceIn *hw)
{
SpiceVoiceIn *in = container_of (hw, SpiceVoiceIn, hw);
spice_server_remove_interface (&in->sin.base);
}
static int line_in_run (HWVoiceIn *hw)
{
SpiceVoiceIn *in = container_of (hw, SpiceVoiceIn, hw);
int num_samples;
int ready;
int len[2];
uint64_t delta_samp;
const uint32_t *samples;
if (!(num_samples = hw->samples - audio_pcm_hw_get_live_in (hw))) {
return 0;
}
delta_samp = rate_get_samples (&hw->info, &in->rate);
num_samples = audio_MIN (num_samples, delta_samp);
ready = spice_server_record_get_samples (&in->sin, in->samples, num_samples);
samples = in->samples;
if (ready == 0) {
static const uint32_t silence[LINE_IN_SAMPLES];
samples = silence;
ready = LINE_IN_SAMPLES;
}
num_samples = audio_MIN (ready, num_samples);
if (hw->wpos + num_samples > hw->samples) {
len[0] = hw->samples - hw->wpos;
len[1] = num_samples - len[0];
} else {
len[0] = num_samples;
len[1] = 0;
}
hw->conv (hw->conv_buf + hw->wpos, samples, len[0]);
if (len[1]) {
hw->conv (hw->conv_buf, samples + len[0], len[1]);
}
hw->wpos = (hw->wpos + num_samples) % hw->samples;
return num_samples;
}
static int line_in_read (SWVoiceIn *sw, void *buf, int size)
{
return audio_pcm_sw_read (sw, buf, size);
}
static int line_in_ctl (HWVoiceIn *hw, int cmd, ...)
{
SpiceVoiceIn *in = container_of (hw, SpiceVoiceIn, hw);
switch (cmd) {
case VOICE_ENABLE:
if (in->active) {
break;
}
in->active = 1;
rate_start (&in->rate);
spice_server_record_start (&in->sin);
break;
case VOICE_DISABLE:
if (!in->active) {
break;
}
in->active = 0;
spice_server_record_stop (&in->sin);
break;
}
return 0;
}
static struct audio_option audio_options[] = {
{ /* end of list */ },
};
static struct audio_pcm_ops audio_callbacks = {
.init_out = line_out_init,
.fini_out = line_out_fini,
.run_out = line_out_run,
.write = line_out_write,
.ctl_out = line_out_ctl,
.init_in = line_in_init,
.fini_in = line_in_fini,
.run_in = line_in_run,
.read = line_in_read,
.ctl_in = line_in_ctl,
};
struct audio_driver spice_audio_driver = {
.name = "spice",
.descr = "spice audio driver",
.options = audio_options,
.init = spice_audio_init,
.fini = spice_audio_fini,
.pcm_ops = &audio_callbacks,
.max_voices_out = 1,
.max_voices_in = 1,
.voice_size_out = sizeof (SpiceVoiceOut),
.voice_size_in = sizeof (SpiceVoiceIn),
};
void qemu_spice_audio_init (void)
{
spice_audio_driver.can_be_default = 1;
}

View File

@@ -40,22 +40,24 @@ static struct {
struct audsettings settings;
const char *wav_path;
} conf = {
.settings.freq = 44100,
.settings.nchannels = 2,
.settings.fmt = AUD_FMT_S16,
.wav_path = "qemu.wav"
{
44100,
2,
AUD_FMT_S16,
0
},
"qemu.wav"
};
static int wav_run_out (HWVoiceOut *hw, int live)
static int wav_run_out (HWVoiceOut *hw)
{
WAVVoiceOut *wav = (WAVVoiceOut *) hw;
int rpos, decr, samples;
int rpos, live, decr, samples;
uint8_t *dst;
struct st_sample *src;
int64_t now = qemu_get_clock (vm_clock);
int64_t ticks = now - wav->old_ticks;
int64_t bytes =
muldiv64 (ticks, hw->info.bytes_per_second, get_ticks_per_sec ());
int64_t bytes = (ticks * hw->info.bytes_per_second) / ticks_per_sec;
if (bytes > INT_MAX) {
samples = INT_MAX >> hw->info.shift;
@@ -64,6 +66,11 @@ static int wav_run_out (HWVoiceOut *hw, int live)
samples = bytes >> hw->info.shift;
}
live = audio_pcm_hw_get_live_out (hw);
if (!live) {
return 0;
}
wav->old_ticks = now;
decr = audio_MIN (live, samples);
samples = decr;
@@ -212,51 +219,45 @@ static void wav_audio_fini (void *opaque)
}
static struct audio_option wav_options[] = {
{
.name = "FREQUENCY",
.tag = AUD_OPT_INT,
.valp = &conf.settings.freq,
.descr = "Frequency"
},
{
.name = "FORMAT",
.tag = AUD_OPT_FMT,
.valp = &conf.settings.fmt,
.descr = "Format"
},
{
.name = "DAC_FIXED_CHANNELS",
.tag = AUD_OPT_INT,
.valp = &conf.settings.nchannels,
.descr = "Number of channels (1 - mono, 2 - stereo)"
},
{
.name = "PATH",
.tag = AUD_OPT_STR,
.valp = &conf.wav_path,
.descr = "Path to wave file"
},
{ /* End of list */ }
{"FREQUENCY", AUD_OPT_INT, &conf.settings.freq,
"Frequency", NULL, 0},
{"FORMAT", AUD_OPT_FMT, &conf.settings.fmt,
"Format", NULL, 0},
{"DAC_FIXED_CHANNELS", AUD_OPT_INT, &conf.settings.nchannels,
"Number of channels (1 - mono, 2 - stereo)", NULL, 0},
{"PATH", AUD_OPT_STR, &conf.wav_path,
"Path to wave file", NULL, 0},
{NULL, 0, NULL, NULL, NULL, 0}
};
static struct audio_pcm_ops wav_pcm_ops = {
.init_out = wav_init_out,
.fini_out = wav_fini_out,
.run_out = wav_run_out,
.write = wav_write_out,
.ctl_out = wav_ctl_out,
wav_init_out,
wav_fini_out,
wav_run_out,
wav_write_out,
wav_ctl_out,
NULL,
NULL,
NULL,
NULL,
NULL
};
struct audio_driver wav_audio_driver = {
.name = "wav",
.descr = "WAV renderer http://wikipedia.org/wiki/WAV",
.options = wav_options,
.init = wav_audio_init,
.fini = wav_audio_fini,
.pcm_ops = &wav_pcm_ops,
.can_be_default = 0,
.max_voices_out = 1,
.max_voices_in = 0,
.voice_size_out = sizeof (WAVVoiceOut),
.voice_size_in = 0
INIT_FIELD (name = ) "wav",
INIT_FIELD (descr = )
"WAV renderer http://wikipedia.org/wiki/WAV",
INIT_FIELD (options = ) wav_options,
INIT_FIELD (init = ) wav_audio_init,
INIT_FIELD (fini = ) wav_audio_fini,
INIT_FIELD (pcm_ops = ) &wav_pcm_ops,
INIT_FIELD (can_be_default = ) 0,
INIT_FIELD (max_voices_out = ) 1,
INIT_FIELD (max_voices_in = ) 0,
INIT_FIELD (voice_size_out = ) sizeof (WAVVoiceOut),
INIT_FIELD (voice_size_in = ) 0
};

View File

@@ -1,5 +1,5 @@
#include "hw/hw.h"
#include "monitor.h"
#include "console.h"
#include "audio.h"
typedef struct {
@@ -71,9 +71,9 @@ static void wav_capture_info (void *opaque)
WAVState *wav = opaque;
char *path = wav->path;
monitor_printf(cur_mon, "Capturing audio(%d,%d,%d) to %s: %d bytes\n",
wav->freq, wav->bits, wav->nchannels,
path ? path : "<not available>", wav->bytes);
term_printf ("Capturing audio(%d,%d,%d) to %s: %d bytes\n",
wav->freq, wav->bits, wav->nchannels,
path ? path : "<not available>", wav->bytes);
}
static struct capture_ops wav_capture_ops = {
@@ -84,7 +84,6 @@ static struct capture_ops wav_capture_ops = {
int wav_start_capture (CaptureState *s, const char *path, int freq,
int bits, int nchannels)
{
Monitor *mon = cur_mon;
WAVState *wav;
uint8_t hdr[] = {
0x52, 0x49, 0x46, 0x46, 0x00, 0x00, 0x00, 0x00, 0x57, 0x41, 0x56,
@@ -98,13 +97,13 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
CaptureVoiceOut *cap;
if (bits != 8 && bits != 16) {
monitor_printf(mon, "incorrect bit count %d, must be 8 or 16\n", bits);
term_printf ("incorrect bit count %d, must be 8 or 16\n", bits);
return -1;
}
if (nchannels != 1 && nchannels != 2) {
monitor_printf(mon, "incorrect channel count %d, must be 1 or 2\n",
nchannels);
term_printf ("incorrect channel count %d, must be 1 or 2\n",
nchannels);
return -1;
}
@@ -132,8 +131,8 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
wav->f = qemu_fopen (path, "wb");
if (!wav->f) {
monitor_printf(mon, "Failed to open wave file `%s'\nReason: %s\n",
path, strerror (errno));
term_printf ("Failed to open wave file `%s'\nReason: %s\n",
path, strerror (errno));
qemu_free (wav);
return -1;
}
@@ -145,9 +144,9 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
qemu_put_buffer (wav->f, hdr, sizeof (hdr));
cap = AUD_add_capture (&as, &ops, wav);
cap = AUD_add_capture (NULL, &as, &ops, wav);
if (!cap) {
monitor_printf(mon, "Failed to add audio capture\n");
term_printf ("Failed to add audio capture\n");
qemu_free (wav->path);
qemu_fclose (wav->f);
qemu_free (wav);

View File

@@ -1,723 +0,0 @@
/* public domain */
#include "qemu-common.h"
#include "sysemu.h"
#include "audio.h"
#define AUDIO_CAP "winwave"
#include "audio_int.h"
#include <windows.h>
#include <mmsystem.h>
#include "audio_win_int.h"
static struct {
int dac_headers;
int dac_samples;
int adc_headers;
int adc_samples;
} conf = {
.dac_headers = 4,
.dac_samples = 1024,
.adc_headers = 4,
.adc_samples = 1024
};
typedef struct {
HWVoiceOut hw;
HWAVEOUT hwo;
WAVEHDR *hdrs;
HANDLE event;
void *pcm_buf;
int avail;
int pending;
int curhdr;
int paused;
CRITICAL_SECTION crit_sect;
} WaveVoiceOut;
typedef struct {
HWVoiceIn hw;
HWAVEIN hwi;
WAVEHDR *hdrs;
HANDLE event;
void *pcm_buf;
int curhdr;
int paused;
int rpos;
int avail;
CRITICAL_SECTION crit_sect;
} WaveVoiceIn;
static void winwave_log_mmresult (MMRESULT mr)
{
const char *str = "BUG";
switch (mr) {
case MMSYSERR_NOERROR:
str = "Success";
break;
case MMSYSERR_INVALHANDLE:
str = "Specified device handle is invalid";
break;
case MMSYSERR_BADDEVICEID:
str = "Specified device id is out of range";
break;
case MMSYSERR_NODRIVER:
str = "No device driver is present";
break;
case MMSYSERR_NOMEM:
str = "Unable to allocate or locl memory";
break;
case WAVERR_SYNC:
str = "Device is synchronous but waveOutOpen was called "
"without using the WINWAVE_ALLOWSYNC flag";
break;
case WAVERR_UNPREPARED:
str = "The data block pointed to by the pwh parameter "
"hasn't been prepared";
break;
case WAVERR_STILLPLAYING:
str = "There are still buffers in the queue";
break;
default:
dolog ("Reason: Unknown (MMRESULT %#x)\n", mr);
return;
}
dolog ("Reason: %s\n", str);
}
static void GCC_FMT_ATTR (2, 3) winwave_logerr (
MMRESULT mr,
const char *fmt,
...
)
{
va_list ap;
va_start (ap, fmt);
AUD_vlog (AUDIO_CAP, fmt, ap);
va_end (ap);
AUD_log (NULL, " failed\n");
winwave_log_mmresult (mr);
}
static void winwave_anal_close_out (WaveVoiceOut *wave)
{
MMRESULT mr;
mr = waveOutClose (wave->hwo);
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveOutClose");
}
wave->hwo = NULL;
}
static void CALLBACK winwave_callback_out (
HWAVEOUT hwo,
UINT msg,
DWORD_PTR dwInstance,
DWORD_PTR dwParam1,
DWORD_PTR dwParam2
)
{
WaveVoiceOut *wave = (WaveVoiceOut *) dwInstance;
switch (msg) {
case WOM_DONE:
{
WAVEHDR *h = (WAVEHDR *) dwParam1;
if (!h->dwUser) {
h->dwUser = 1;
EnterCriticalSection (&wave->crit_sect);
{
wave->avail += conf.dac_samples;
}
LeaveCriticalSection (&wave->crit_sect);
if (wave->hw.poll_mode) {
if (!SetEvent (wave->event)) {
dolog ("DAC SetEvent failed %lx\n", GetLastError ());
}
}
}
}
break;
case WOM_CLOSE:
case WOM_OPEN:
break;
default:
dolog ("unknown wave out callback msg %x\n", msg);
}
}
static int winwave_init_out (HWVoiceOut *hw, struct audsettings *as)
{
int i;
int err;
MMRESULT mr;
WAVEFORMATEX wfx;
WaveVoiceOut *wave;
wave = (WaveVoiceOut *) hw;
InitializeCriticalSection (&wave->crit_sect);
err = waveformat_from_audio_settings (&wfx, as);
if (err) {
goto err0;
}
mr = waveOutOpen (&wave->hwo, WAVE_MAPPER, &wfx,
(DWORD_PTR) winwave_callback_out,
(DWORD_PTR) wave, CALLBACK_FUNCTION);
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveOutOpen");
goto err1;
}
wave->hdrs = audio_calloc (AUDIO_FUNC, conf.dac_headers,
sizeof (*wave->hdrs));
if (!wave->hdrs) {
goto err2;
}
audio_pcm_init_info (&hw->info, as);
hw->samples = conf.dac_samples * conf.dac_headers;
wave->avail = hw->samples;
wave->pcm_buf = audio_calloc (AUDIO_FUNC, conf.dac_samples,
conf.dac_headers << hw->info.shift);
if (!wave->pcm_buf) {
goto err3;
}
for (i = 0; i < conf.dac_headers; ++i) {
WAVEHDR *h = &wave->hdrs[i];
h->dwUser = 0;
h->dwBufferLength = conf.dac_samples << hw->info.shift;
h->lpData = advance (wave->pcm_buf, i * h->dwBufferLength);
h->dwFlags = 0;
mr = waveOutPrepareHeader (wave->hwo, h, sizeof (*h));
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveOutPrepareHeader(%d)", i);
goto err4;
}
}
return 0;
err4:
qemu_free (wave->pcm_buf);
err3:
qemu_free (wave->hdrs);
err2:
winwave_anal_close_out (wave);
err1:
err0:
return -1;
}
static int winwave_write (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write (sw, buf, len);
}
static int winwave_run_out (HWVoiceOut *hw, int live)
{
WaveVoiceOut *wave = (WaveVoiceOut *) hw;
int decr;
int doreset;
EnterCriticalSection (&wave->crit_sect);
{
decr = audio_MIN (live, wave->avail);
decr = audio_pcm_hw_clip_out (hw, wave->pcm_buf, decr, wave->pending);
wave->pending += decr;
wave->avail -= decr;
}
LeaveCriticalSection (&wave->crit_sect);
doreset = hw->poll_mode && (wave->pending >= conf.dac_samples);
if (doreset && !ResetEvent (wave->event)) {
dolog ("DAC ResetEvent failed %lx\n", GetLastError ());
}
while (wave->pending >= conf.dac_samples) {
MMRESULT mr;
WAVEHDR *h = &wave->hdrs[wave->curhdr];
h->dwUser = 0;
mr = waveOutWrite (wave->hwo, h, sizeof (*h));
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveOutWrite(%d)", wave->curhdr);
break;
}
wave->pending -= conf.dac_samples;
wave->curhdr = (wave->curhdr + 1) % conf.dac_headers;
}
return decr;
}
static void winwave_poll (void *opaque)
{
(void) opaque;
audio_run ("winwave_poll");
}
static void winwave_fini_out (HWVoiceOut *hw)
{
int i;
MMRESULT mr;
WaveVoiceOut *wave = (WaveVoiceOut *) hw;
mr = waveOutReset (wave->hwo);
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveOutReset");
}
for (i = 0; i < conf.dac_headers; ++i) {
mr = waveOutUnprepareHeader (wave->hwo, &wave->hdrs[i],
sizeof (wave->hdrs[i]));
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveOutUnprepareHeader(%d)", i);
}
}
winwave_anal_close_out (wave);
if (wave->event) {
qemu_del_wait_object (wave->event, winwave_poll, wave);
if (!CloseHandle (wave->event)) {
dolog ("DAC CloseHandle failed %lx\n", GetLastError ());
}
wave->event = NULL;
}
qemu_free (wave->pcm_buf);
wave->pcm_buf = NULL;
qemu_free (wave->hdrs);
wave->hdrs = NULL;
}
static int winwave_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
MMRESULT mr;
WaveVoiceOut *wave = (WaveVoiceOut *) hw;
switch (cmd) {
case VOICE_ENABLE:
{
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
if (poll_mode && !wave->event) {
wave->event = CreateEvent (NULL, TRUE, TRUE, NULL);
if (!wave->event) {
dolog ("DAC CreateEvent: %lx, poll mode will be disabled\n",
GetLastError ());
}
}
if (wave->event) {
int ret;
ret = qemu_add_wait_object (wave->event, winwave_poll, wave);
hw->poll_mode = (ret == 0);
}
else {
hw->poll_mode = 0;
}
if (wave->paused) {
mr = waveOutRestart (wave->hwo);
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveOutRestart");
}
wave->paused = 0;
}
}
return 0;
case VOICE_DISABLE:
if (!wave->paused) {
mr = waveOutPause (wave->hwo);
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveOutPause");
}
else {
wave->paused = 1;
}
}
if (wave->event) {
qemu_del_wait_object (wave->event, winwave_poll, wave);
}
return 0;
}
return -1;
}
static void winwave_anal_close_in (WaveVoiceIn *wave)
{
MMRESULT mr;
mr = waveInClose (wave->hwi);
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveInClose");
}
wave->hwi = NULL;
}
static void CALLBACK winwave_callback_in (
HWAVEIN *hwi,
UINT msg,
DWORD_PTR dwInstance,
DWORD_PTR dwParam1,
DWORD_PTR dwParam2
)
{
WaveVoiceIn *wave = (WaveVoiceIn *) dwInstance;
switch (msg) {
case WIM_DATA:
{
WAVEHDR *h = (WAVEHDR *) dwParam1;
if (!h->dwUser) {
h->dwUser = 1;
EnterCriticalSection (&wave->crit_sect);
{
wave->avail += conf.adc_samples;
}
LeaveCriticalSection (&wave->crit_sect);
if (wave->hw.poll_mode) {
if (!SetEvent (wave->event)) {
dolog ("ADC SetEvent failed %lx\n", GetLastError ());
}
}
}
}
break;
case WIM_CLOSE:
case WIM_OPEN:
break;
default:
dolog ("unknown wave in callback msg %x\n", msg);
}
}
static void winwave_add_buffers (WaveVoiceIn *wave, int samples)
{
int doreset;
doreset = wave->hw.poll_mode && (samples >= conf.adc_samples);
if (doreset && !ResetEvent (wave->event)) {
dolog ("ADC ResetEvent failed %lx\n", GetLastError ());
}
while (samples >= conf.adc_samples) {
MMRESULT mr;
WAVEHDR *h = &wave->hdrs[wave->curhdr];
h->dwUser = 0;
mr = waveInAddBuffer (wave->hwi, h, sizeof (*h));
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveInAddBuffer(%d)", wave->curhdr);
}
wave->curhdr = (wave->curhdr + 1) % conf.adc_headers;
samples -= conf.adc_samples;
}
}
static int winwave_init_in (HWVoiceIn *hw, struct audsettings *as)
{
int i;
int err;
MMRESULT mr;
WAVEFORMATEX wfx;
WaveVoiceIn *wave;
wave = (WaveVoiceIn *) hw;
InitializeCriticalSection (&wave->crit_sect);
err = waveformat_from_audio_settings (&wfx, as);
if (err) {
goto err0;
}
mr = waveInOpen (&wave->hwi, WAVE_MAPPER, &wfx,
(DWORD_PTR) winwave_callback_in,
(DWORD_PTR) wave, CALLBACK_FUNCTION);
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveInOpen");
goto err1;
}
wave->hdrs = audio_calloc (AUDIO_FUNC, conf.dac_headers,
sizeof (*wave->hdrs));
if (!wave->hdrs) {
goto err2;
}
audio_pcm_init_info (&hw->info, as);
hw->samples = conf.adc_samples * conf.adc_headers;
wave->avail = 0;
wave->pcm_buf = audio_calloc (AUDIO_FUNC, conf.adc_samples,
conf.adc_headers << hw->info.shift);
if (!wave->pcm_buf) {
goto err3;
}
for (i = 0; i < conf.adc_headers; ++i) {
WAVEHDR *h = &wave->hdrs[i];
h->dwUser = 0;
h->dwBufferLength = conf.adc_samples << hw->info.shift;
h->lpData = advance (wave->pcm_buf, i * h->dwBufferLength);
h->dwFlags = 0;
mr = waveInPrepareHeader (wave->hwi, h, sizeof (*h));
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveInPrepareHeader(%d)", i);
goto err4;
}
}
wave->paused = 1;
winwave_add_buffers (wave, hw->samples);
return 0;
err4:
qemu_free (wave->pcm_buf);
err3:
qemu_free (wave->hdrs);
err2:
winwave_anal_close_in (wave);
err1:
err0:
return -1;
}
static void winwave_fini_in (HWVoiceIn *hw)
{
int i;
MMRESULT mr;
WaveVoiceIn *wave = (WaveVoiceIn *) hw;
mr = waveInReset (wave->hwi);
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveInReset");
}
for (i = 0; i < conf.adc_headers; ++i) {
mr = waveInUnprepareHeader (wave->hwi, &wave->hdrs[i],
sizeof (wave->hdrs[i]));
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveInUnprepareHeader(%d)", i);
}
}
winwave_anal_close_in (wave);
if (wave->event) {
qemu_del_wait_object (wave->event, winwave_poll, wave);
if (!CloseHandle (wave->event)) {
dolog ("ADC CloseHandle failed %lx\n", GetLastError ());
}
wave->event = NULL;
}
qemu_free (wave->pcm_buf);
wave->pcm_buf = NULL;
qemu_free (wave->hdrs);
wave->hdrs = NULL;
}
static int winwave_run_in (HWVoiceIn *hw)
{
WaveVoiceIn *wave = (WaveVoiceIn *) hw;
int live = audio_pcm_hw_get_live_in (hw);
int dead = hw->samples - live;
int decr, ret;
if (!dead) {
return 0;
}
EnterCriticalSection (&wave->crit_sect);
{
decr = audio_MIN (dead, wave->avail);
wave->avail -= decr;
}
LeaveCriticalSection (&wave->crit_sect);
ret = decr;
while (decr) {
int left = hw->samples - hw->wpos;
int conv = audio_MIN (left, decr);
hw->conv (hw->conv_buf + hw->wpos,
advance (wave->pcm_buf, wave->rpos << hw->info.shift),
conv);
wave->rpos = (wave->rpos + conv) % hw->samples;
hw->wpos = (hw->wpos + conv) % hw->samples;
decr -= conv;
}
winwave_add_buffers (wave, ret);
return ret;
}
static int winwave_read (SWVoiceIn *sw, void *buf, int size)
{
return audio_pcm_sw_read (sw, buf, size);
}
static int winwave_ctl_in (HWVoiceIn *hw, int cmd, ...)
{
MMRESULT mr;
WaveVoiceIn *wave = (WaveVoiceIn *) hw;
switch (cmd) {
case VOICE_ENABLE:
{
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
if (poll_mode && !wave->event) {
wave->event = CreateEvent (NULL, TRUE, TRUE, NULL);
if (!wave->event) {
dolog ("ADC CreateEvent: %lx, poll mode will be disabled\n",
GetLastError ());
}
}
if (wave->event) {
int ret;
ret = qemu_add_wait_object (wave->event, winwave_poll, wave);
hw->poll_mode = (ret == 0);
}
else {
hw->poll_mode = 0;
}
if (wave->paused) {
mr = waveInStart (wave->hwi);
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveInStart");
}
wave->paused = 0;
}
}
return 0;
case VOICE_DISABLE:
if (!wave->paused) {
mr = waveInStop (wave->hwi);
if (mr != MMSYSERR_NOERROR) {
winwave_logerr (mr, "waveInStop");
}
else {
wave->paused = 1;
}
}
if (wave->event) {
qemu_del_wait_object (wave->event, winwave_poll, wave);
}
return 0;
}
return 0;
}
static void *winwave_audio_init (void)
{
return &conf;
}
static void winwave_audio_fini (void *opaque)
{
(void) opaque;
}
static struct audio_option winwave_options[] = {
{
.name = "DAC_HEADERS",
.tag = AUD_OPT_INT,
.valp = &conf.dac_headers,
.descr = "DAC number of headers",
},
{
.name = "DAC_SAMPLES",
.tag = AUD_OPT_INT,
.valp = &conf.dac_samples,
.descr = "DAC number of samples per header",
},
{
.name = "ADC_HEADERS",
.tag = AUD_OPT_INT,
.valp = &conf.adc_headers,
.descr = "ADC number of headers",
},
{
.name = "ADC_SAMPLES",
.tag = AUD_OPT_INT,
.valp = &conf.adc_samples,
.descr = "ADC number of samples per header",
},
{ /* End of list */ }
};
static struct audio_pcm_ops winwave_pcm_ops = {
.init_out = winwave_init_out,
.fini_out = winwave_fini_out,
.run_out = winwave_run_out,
.write = winwave_write,
.ctl_out = winwave_ctl_out,
.init_in = winwave_init_in,
.fini_in = winwave_fini_in,
.run_in = winwave_run_in,
.read = winwave_read,
.ctl_in = winwave_ctl_in
};
struct audio_driver winwave_audio_driver = {
.name = "winwave",
.descr = "Windows Waveform Audio http://msdn.microsoft.com",
.options = winwave_options,
.init = winwave_audio_init,
.fini = winwave_audio_fini,
.pcm_ops = &winwave_pcm_ops,
.can_be_default = 1,
.max_voices_out = INT_MAX,
.max_voices_in = INT_MAX,
.voice_size_out = sizeof (WaveVoiceOut),
.voice_size_in = sizeof (WaveVoiceIn)
};

148
balloon.c
View File

@@ -1,148 +0,0 @@
/*
* QEMU System Emulator
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "sysemu.h"
#include "monitor.h"
#include "qjson.h"
#include "qint.h"
#include "cpu-common.h"
#include "kvm.h"
#include "balloon.h"
#include "trace.h"
static QEMUBalloonEvent *qemu_balloon_event;
void *qemu_balloon_event_opaque;
void qemu_add_balloon_handler(QEMUBalloonEvent *func, void *opaque)
{
qemu_balloon_event = func;
qemu_balloon_event_opaque = opaque;
}
int qemu_balloon(ram_addr_t target, MonitorCompletion cb, void *opaque)
{
if (qemu_balloon_event) {
trace_balloon_event(qemu_balloon_event_opaque, target);
qemu_balloon_event(qemu_balloon_event_opaque, target, cb, opaque);
return 1;
} else {
return 0;
}
}
int qemu_balloon_status(MonitorCompletion cb, void *opaque)
{
if (qemu_balloon_event) {
qemu_balloon_event(qemu_balloon_event_opaque, 0, cb, opaque);
return 1;
} else {
return 0;
}
}
static void print_balloon_stat(const char *key, QObject *obj, void *opaque)
{
Monitor *mon = opaque;
if (strcmp(key, "actual"))
monitor_printf(mon, ",%s=%" PRId64, key,
qint_get_int(qobject_to_qint(obj)));
}
void monitor_print_balloon(Monitor *mon, const QObject *data)
{
QDict *qdict;
qdict = qobject_to_qdict(data);
if (!qdict_haskey(qdict, "actual"))
return;
monitor_printf(mon, "balloon: actual=%" PRId64,
qdict_get_int(qdict, "actual") >> 20);
qdict_iter(qdict, print_balloon_stat, mon);
monitor_printf(mon, "\n");
}
/**
* do_info_balloon(): Balloon information
*
* Make an asynchronous request for balloon info. When the request completes
* a QDict will be returned according to the following specification:
*
* - "actual": current balloon value in bytes
* The following fields may or may not be present:
* - "mem_swapped_in": Amount of memory swapped in (bytes)
* - "mem_swapped_out": Amount of memory swapped out (bytes)
* - "major_page_faults": Number of major faults
* - "minor_page_faults": Number of minor faults
* - "free_mem": Total amount of free and unused memory (bytes)
* - "total_mem": Total amount of available memory (bytes)
*
* Example:
*
* { "actual": 1073741824, "mem_swapped_in": 0, "mem_swapped_out": 0,
* "major_page_faults": 142, "minor_page_faults": 239245,
* "free_mem": 1014185984, "total_mem": 1044668416 }
*/
int do_info_balloon(Monitor *mon, MonitorCompletion cb, void *opaque)
{
int ret;
if (kvm_enabled() && !kvm_has_sync_mmu()) {
qerror_report(QERR_KVM_MISSING_CAP, "synchronous MMU", "balloon");
return -1;
}
ret = qemu_balloon_status(cb, opaque);
if (!ret) {
qerror_report(QERR_DEVICE_NOT_ACTIVE, "balloon");
return -1;
}
return 0;
}
/**
* do_balloon(): Request VM to change its memory allocation
*/
int do_balloon(Monitor *mon, const QDict *params,
MonitorCompletion cb, void *opaque)
{
int ret;
if (kvm_enabled() && !kvm_has_sync_mmu()) {
qerror_report(QERR_KVM_MISSING_CAP, "synchronous MMU", "balloon");
return -1;
}
ret = qemu_balloon(qdict_get_int(params, "value"), cb, opaque);
if (ret == 0) {
qerror_report(QERR_DEVICE_NOT_ACTIVE, "balloon");
return -1;
}
cb(opaque, NULL);
return 0;
}

View File

@@ -14,20 +14,14 @@
#ifndef _QEMU_BALLOON_H
#define _QEMU_BALLOON_H
#include "monitor.h"
#include "cpu-defs.h"
typedef void (QEMUBalloonEvent)(void *opaque, ram_addr_t target,
MonitorCompletion cb, void *cb_data);
typedef ram_addr_t (QEMUBalloonEvent)(void *opaque, ram_addr_t target);
void qemu_add_balloon_handler(QEMUBalloonEvent *func, void *opaque);
int qemu_balloon(ram_addr_t target, MonitorCompletion cb, void *opaque);
void qemu_balloon(ram_addr_t target);
int qemu_balloon_status(MonitorCompletion cb, void *opaque);
void monitor_print_balloon(Monitor *mon, const QObject *data);
int do_info_balloon(Monitor *mon, MonitorCompletion cb, void *opaque);
int do_balloon(Monitor *mon, const QDict *params,
MonitorCompletion cb, void *opaque);
ram_addr_t qemu_balloon_status(void);
#endif

View File

@@ -24,7 +24,6 @@
*/
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
/**************************************************************/
@@ -80,6 +79,8 @@ struct bochs_header {
};
typedef struct BDRVBochsState {
int fd;
uint32_t *catalog_bitmap;
int catalog_size;
@@ -107,16 +108,25 @@ static int bochs_probe(const uint8_t *buf, int buf_size, const char *filename)
return 0;
}
static int bochs_open(BlockDriverState *bs, int flags)
static int bochs_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVBochsState *s = bs->opaque;
int i;
int fd, i;
struct bochs_header bochs;
struct bochs_header_v1 header_v1;
fd = open(filename, O_RDWR | O_BINARY);
if (fd < 0) {
fd = open(filename, O_RDONLY | O_BINARY);
if (fd < 0)
return -1;
}
bs->read_only = 1; // no write support yet
if (bdrv_pread(bs->file, 0, &bochs, sizeof(bochs)) != sizeof(bochs)) {
s->fd = fd;
if (read(fd, &bochs, sizeof(bochs)) != sizeof(bochs)) {
goto fail;
}
@@ -135,10 +145,12 @@ static int bochs_open(BlockDriverState *bs, int flags)
bs->total_sectors = le64_to_cpu(bochs.extra.redolog.disk) / 512;
}
lseek(s->fd, le32_to_cpu(bochs.header), SEEK_SET);
s->catalog_size = le32_to_cpu(bochs.extra.redolog.catalog);
s->catalog_bitmap = qemu_malloc(s->catalog_size * 4);
if (bdrv_pread(bs->file, le32_to_cpu(bochs.header), s->catalog_bitmap,
s->catalog_size * 4) != s->catalog_size * 4)
if (read(s->fd, s->catalog_bitmap, s->catalog_size * 4) !=
s->catalog_size * 4)
goto fail;
for (i = 0; i < s->catalog_size; i++)
le32_to_cpus(&s->catalog_bitmap[i]);
@@ -152,53 +164,68 @@ static int bochs_open(BlockDriverState *bs, int flags)
return 0;
fail:
close(fd);
return -1;
}
static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
static inline int seek_to_sector(BlockDriverState *bs, int64_t sector_num)
{
BDRVBochsState *s = bs->opaque;
int64_t offset = sector_num * 512;
int64_t extent_index, extent_offset, bitmap_offset;
int64_t extent_index, extent_offset, bitmap_offset, block_offset;
char bitmap_entry;
// seek to sector
extent_index = offset / s->extent_size;
extent_offset = (offset % s->extent_size) / 512;
if (s->catalog_bitmap[extent_index] == 0xffffffff) {
return -1; /* not allocated */
if (s->catalog_bitmap[extent_index] == 0xffffffff)
{
// fprintf(stderr, "page not allocated [%x - %x:%x]\n",
// sector_num, extent_index, extent_offset);
return -1; // not allocated
}
bitmap_offset = s->data_offset + (512 * s->catalog_bitmap[extent_index] *
(s->extent_blocks + s->bitmap_blocks));
block_offset = bitmap_offset + (512 * (s->bitmap_blocks + extent_offset));
/* read in bitmap for current extent */
if (bdrv_pread(bs->file, bitmap_offset + (extent_offset / 8),
&bitmap_entry, 1) != 1) {
return -1;
// fprintf(stderr, "sect: %x [ext i: %x o: %x] -> %x bitmap: %x block: %x\n",
// sector_num, extent_index, extent_offset,
// le32_to_cpu(s->catalog_bitmap[extent_index]),
// bitmap_offset, block_offset);
// read in bitmap for current extent
lseek(s->fd, bitmap_offset + (extent_offset / 8), SEEK_SET);
read(s->fd, &bitmap_entry, 1);
if (!((bitmap_entry >> (extent_offset % 8)) & 1))
{
// fprintf(stderr, "sector (%x) in bitmap not allocated\n",
// sector_num);
return -1; // not allocated
}
if (!((bitmap_entry >> (extent_offset % 8)) & 1)) {
return -1; /* not allocated */
}
lseek(s->fd, block_offset, SEEK_SET);
return bitmap_offset + (512 * (s->bitmap_blocks + extent_offset));
return 0;
}
static int bochs_read(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors)
{
BDRVBochsState *s = bs->opaque;
int ret;
while (nb_sectors > 0) {
int64_t block_offset = seek_to_sector(bs, sector_num);
if (block_offset >= 0) {
ret = bdrv_pread(bs->file, block_offset, buf, 512);
if (ret != 512) {
return -1;
}
} else
if (!seek_to_sector(bs, sector_num))
{
ret = read(s->fd, buf, 512);
if (ret != 512)
return -1;
}
else
memset(buf, 0, 512);
nb_sectors--;
sector_num++;
@@ -211,20 +238,15 @@ static void bochs_close(BlockDriverState *bs)
{
BDRVBochsState *s = bs->opaque;
qemu_free(s->catalog_bitmap);
close(s->fd);
}
static BlockDriver bdrv_bochs = {
.format_name = "bochs",
.instance_size = sizeof(BDRVBochsState),
.bdrv_probe = bochs_probe,
.bdrv_open = bochs_open,
.bdrv_read = bochs_read,
.bdrv_close = bochs_close,
BlockDriver bdrv_bochs = {
"bochs",
sizeof(BDRVBochsState),
bochs_probe,
bochs_open,
bochs_read,
NULL,
bochs_close,
};
static void bdrv_bochs_init(void)
{
bdrv_register(&bdrv_bochs);
}
block_init(bdrv_bochs_init);

View File

@@ -23,10 +23,10 @@
*/
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
#include <zlib.h>
typedef struct BDRVCloopState {
int fd;
uint32_t block_size;
uint32_t n_blocks;
uint64_t* offsets;
@@ -50,31 +50,34 @@ static int cloop_probe(const uint8_t *buf, int buf_size, const char *filename)
return 0;
}
static int cloop_open(BlockDriverState *bs, int flags)
static int cloop_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVCloopState *s = bs->opaque;
uint32_t offsets_size,max_compressed_block_size=1,i;
s->fd = open(filename, O_RDONLY | O_BINARY);
if (s->fd < 0)
return -errno;
bs->read_only = 1;
/* read header */
if (bdrv_pread(bs->file, 128, &s->block_size, 4) < 4) {
goto cloop_close;
if(lseek(s->fd,128,SEEK_SET)<0) {
cloop_close:
close(s->fd);
return -1;
}
s->block_size = be32_to_cpu(s->block_size);
if (bdrv_pread(bs->file, 128 + 4, &s->n_blocks, 4) < 4) {
goto cloop_close;
}
s->n_blocks = be32_to_cpu(s->n_blocks);
if(read(s->fd,&s->block_size,4)<4)
goto cloop_close;
s->block_size=be32_to_cpu(s->block_size);
if(read(s->fd,&s->n_blocks,4)<4)
goto cloop_close;
s->n_blocks=be32_to_cpu(s->n_blocks);
/* read offsets */
offsets_size = s->n_blocks * sizeof(uint64_t);
s->offsets = qemu_malloc(offsets_size);
if (bdrv_pread(bs->file, 128 + 4 + 4, s->offsets, offsets_size) <
offsets_size) {
offsets_size=s->n_blocks*sizeof(uint64_t);
s->offsets=(uint64_t*)qemu_malloc(offsets_size);
if(read(s->fd,s->offsets,offsets_size)<offsets_size)
goto cloop_close;
}
for(i=0;i<s->n_blocks;i++) {
s->offsets[i]=be64_to_cpu(s->offsets[i]);
if(i>0) {
@@ -94,21 +97,16 @@ static int cloop_open(BlockDriverState *bs, int flags)
s->sectors_per_block = s->block_size/512;
bs->total_sectors = s->n_blocks*s->sectors_per_block;
return 0;
cloop_close:
return -1;
}
static inline int cloop_read_block(BlockDriverState *bs, int block_num)
static inline int cloop_read_block(BDRVCloopState *s,int block_num)
{
BDRVCloopState *s = bs->opaque;
if(s->current_block != block_num) {
int ret;
uint32_t bytes = s->offsets[block_num+1]-s->offsets[block_num];
ret = bdrv_pread(bs->file, s->offsets[block_num], s->compressed_block,
bytes);
lseek(s->fd, s->offsets[block_num], SEEK_SET);
ret = read(s->fd, s->compressed_block, bytes);
if (ret != bytes)
return -1;
@@ -137,7 +135,7 @@ static int cloop_read(BlockDriverState *bs, int64_t sector_num,
for(i=0;i<nb_sectors;i++) {
uint32_t sector_offset_in_block=((sector_num+i)%s->sectors_per_block),
block_num=(sector_num+i)/s->sectors_per_block;
if(cloop_read_block(bs, block_num) != 0)
if(cloop_read_block(s, block_num) != 0)
return -1;
memcpy(buf+i*512,s->uncompressed_block+sector_offset_in_block*512,512);
}
@@ -147,6 +145,7 @@ static int cloop_read(BlockDriverState *bs, int64_t sector_num,
static void cloop_close(BlockDriverState *bs)
{
BDRVCloopState *s = bs->opaque;
close(s->fd);
if(s->n_blocks>0)
free(s->offsets);
free(s->compressed_block);
@@ -154,18 +153,12 @@ static void cloop_close(BlockDriverState *bs)
inflateEnd(&s->zstream);
}
static BlockDriver bdrv_cloop = {
.format_name = "cloop",
.instance_size = sizeof(BDRVCloopState),
.bdrv_probe = cloop_probe,
.bdrv_open = cloop_open,
.bdrv_read = cloop_read,
.bdrv_close = cloop_close,
BlockDriver bdrv_cloop = {
"cloop",
sizeof(BDRVCloopState),
cloop_probe,
cloop_open,
cloop_read,
NULL,
cloop_close,
};
static void bdrv_cloop_init(void)
{
bdrv_register(&bdrv_cloop);
}
block_init(bdrv_cloop_init);

View File

@@ -21,9 +21,10 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef _WIN32
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
#include <sys/mman.h>
/**************************************************************/
/* COW block driver using file system holes */
@@ -42,6 +43,10 @@ struct cow_header_v2 {
};
typedef struct BDRVCowState {
int fd;
uint8_t *cow_bitmap; /* if non NULL, COW mappings are used first */
uint8_t *cow_bitmap_addr; /* mmap address of cow_bitmap */
int cow_bitmap_size;
int64_t cow_sectors_offset;
} BDRVCowState;
@@ -57,16 +62,22 @@ static int cow_probe(const uint8_t *buf, int buf_size, const char *filename)
return 0;
}
static int cow_open(BlockDriverState *bs, int flags)
static int cow_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVCowState *s = bs->opaque;
int fd;
struct cow_header_v2 cow_header;
int bitmap_size;
int64_t size;
fd = open(filename, O_RDWR | O_BINARY | O_LARGEFILE);
if (fd < 0) {
fd = open(filename, O_RDONLY | O_BINARY | O_LARGEFILE);
if (fd < 0)
return -1;
}
s->fd = fd;
/* see if it is a cow image */
if (bdrv_pread(bs->file, 0, &cow_header, sizeof(cow_header)) !=
sizeof(cow_header)) {
if (read(fd, &cow_header, sizeof(cow_header)) != sizeof(cow_header)) {
goto fail;
}
@@ -82,91 +93,61 @@ static int cow_open(BlockDriverState *bs, int flags)
pstrcpy(bs->backing_file, sizeof(bs->backing_file),
cow_header.backing_file);
bitmap_size = ((bs->total_sectors + 7) >> 3) + sizeof(cow_header);
s->cow_sectors_offset = (bitmap_size + 511) & ~511;
/* mmap the bitmap */
s->cow_bitmap_size = ((bs->total_sectors + 7) >> 3) + sizeof(cow_header);
s->cow_bitmap_addr = mmap(get_mmap_addr(s->cow_bitmap_size),
s->cow_bitmap_size,
PROT_READ | PROT_WRITE,
MAP_SHARED, s->fd, 0);
if (s->cow_bitmap_addr == MAP_FAILED)
goto fail;
s->cow_bitmap = s->cow_bitmap_addr + sizeof(cow_header);
s->cow_sectors_offset = (s->cow_bitmap_size + 511) & ~511;
return 0;
fail:
close(fd);
return -1;
}
/*
* XXX(hch): right now these functions are extremly ineffcient.
* We should just read the whole bitmap we'll need in one go instead.
*/
static inline int cow_set_bit(BlockDriverState *bs, int64_t bitnum)
static inline void cow_set_bit(uint8_t *bitmap, int64_t bitnum)
{
uint64_t offset = sizeof(struct cow_header_v2) + bitnum / 8;
uint8_t bitmap;
int ret;
ret = bdrv_pread(bs->file, offset, &bitmap, sizeof(bitmap));
if (ret < 0) {
return ret;
}
bitmap |= (1 << (bitnum % 8));
ret = bdrv_pwrite_sync(bs->file, offset, &bitmap, sizeof(bitmap));
if (ret < 0) {
return ret;
}
return 0;
bitmap[bitnum / 8] |= (1 << (bitnum%8));
}
static inline int is_bit_set(BlockDriverState *bs, int64_t bitnum)
static inline int is_bit_set(const uint8_t *bitmap, int64_t bitnum)
{
uint64_t offset = sizeof(struct cow_header_v2) + bitnum / 8;
uint8_t bitmap;
int ret;
ret = bdrv_pread(bs->file, offset, &bitmap, sizeof(bitmap));
if (ret < 0) {
return ret;
}
return !!(bitmap & (1 << (bitnum % 8)));
return !!(bitmap[bitnum / 8] & (1 << (bitnum%8)));
}
/* Return true if first block has been changed (ie. current version is
* in COW file). Set the number of continuous blocks for which that
* is true. */
static int cow_is_allocated(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, int *num_same)
static inline int is_changed(uint8_t *bitmap,
int64_t sector_num, int nb_sectors,
int *num_same)
{
int changed;
if (nb_sectors == 0) {
if (!bitmap || nb_sectors == 0) {
*num_same = nb_sectors;
return 0;
}
changed = is_bit_set(bs, sector_num);
if (changed < 0) {
return 0; /* XXX: how to return I/O errors? */
}
changed = is_bit_set(bitmap, sector_num);
for (*num_same = 1; *num_same < nb_sectors; (*num_same)++) {
if (is_bit_set(bs, sector_num + *num_same) != changed)
if (is_bit_set(bitmap, sector_num + *num_same) != changed)
break;
}
return changed;
}
static int cow_update_bitmap(BlockDriverState *bs, int64_t sector_num,
int nb_sectors)
static int cow_is_allocated(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, int *pnum)
{
int error = 0;
int i;
for (i = 0; i < nb_sectors; i++) {
error = cow_set_bit(bs, sector_num + i);
if (error) {
break;
}
}
return error;
BDRVCowState *s = bs->opaque;
return is_changed(s->cow_bitmap, sector_num, nb_sectors, pnum);
}
static int cow_read(BlockDriverState *bs, int64_t sector_num,
@@ -176,10 +157,9 @@ static int cow_read(BlockDriverState *bs, int64_t sector_num,
int ret, n;
while (nb_sectors > 0) {
if (cow_is_allocated(bs, sector_num, nb_sectors, &n)) {
ret = bdrv_pread(bs->file,
s->cow_sectors_offset + sector_num * 512,
buf, n * 512);
if (is_changed(s->cow_bitmap, sector_num, nb_sectors, &n)) {
lseek(s->fd, s->cow_sectors_offset + sector_num * 512, SEEK_SET);
ret = read(s->fd, buf, n * 512);
if (ret != n * 512)
return -1;
} else {
@@ -203,43 +183,38 @@ static int cow_write(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors)
{
BDRVCowState *s = bs->opaque;
int ret;
int ret, i;
ret = bdrv_pwrite(bs->file, s->cow_sectors_offset + sector_num * 512,
buf, nb_sectors * 512);
lseek(s->fd, s->cow_sectors_offset + sector_num * 512, SEEK_SET);
ret = write(s->fd, buf, nb_sectors * 512);
if (ret != nb_sectors * 512)
return -1;
return cow_update_bitmap(bs, sector_num, nb_sectors);
for (i = 0; i < nb_sectors; i++)
cow_set_bit(s->cow_bitmap, sector_num + i);
return 0;
}
static void cow_close(BlockDriverState *bs)
{
BDRVCowState *s = bs->opaque;
munmap(s->cow_bitmap_addr, s->cow_bitmap_size);
close(s->fd);
}
static int cow_create(const char *filename, QEMUOptionParameter *options)
static int cow_create(const char *filename, int64_t image_sectors,
const char *image_filename, int flags)
{
int fd, cow_fd;
struct cow_header_v2 cow_header;
struct stat st;
int64_t image_sectors = 0;
const char *image_filename = NULL;
int ret;
/* Read out options */
while (options && options->name) {
if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
image_sectors = options->value.n / 512;
} else if (!strcmp(options->name, BLOCK_OPT_BACKING_FILE)) {
image_filename = options->value.s;
}
options++;
}
if (flags)
return -ENOTSUP;
cow_fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
0644);
if (cow_fd < 0)
return -errno;
return -1;
memset(&cow_header, 0, sizeof(cow_header));
cow_header.magic = cpu_to_be32(COW_MAGIC);
cow_header.version = cpu_to_be32(COW_VERSION);
@@ -264,61 +239,29 @@ static int cow_create(const char *filename, QEMUOptionParameter *options)
}
cow_header.sectorsize = cpu_to_be32(512);
cow_header.size = cpu_to_be64(image_sectors * 512);
ret = qemu_write_full(cow_fd, &cow_header, sizeof(cow_header));
if (ret != sizeof(cow_header)) {
ret = -errno;
goto exit;
}
write(cow_fd, &cow_header, sizeof(cow_header));
/* resize to include at least all the bitmap */
ret = ftruncate(cow_fd, sizeof(cow_header) + ((image_sectors + 7) >> 3));
if (ret) {
ret = -errno;
goto exit;
}
exit:
ftruncate(cow_fd, sizeof(cow_header) + ((image_sectors + 7) >> 3));
close(cow_fd);
return ret;
return 0;
}
static int cow_flush(BlockDriverState *bs)
static void cow_flush(BlockDriverState *bs)
{
return bdrv_flush(bs->file);
BDRVCowState *s = bs->opaque;
fsync(s->fd);
}
static QEMUOptionParameter cow_create_options[] = {
{
.name = BLOCK_OPT_SIZE,
.type = OPT_SIZE,
.help = "Virtual disk size"
},
{
.name = BLOCK_OPT_BACKING_FILE,
.type = OPT_STRING,
.help = "File name of a base image"
},
{ NULL }
BlockDriver bdrv_cow = {
"cow",
sizeof(BDRVCowState),
cow_probe,
cow_open,
cow_read,
cow_write,
cow_close,
cow_create,
cow_flush,
cow_is_allocated,
};
static BlockDriver bdrv_cow = {
.format_name = "cow",
.instance_size = sizeof(BDRVCowState),
.bdrv_probe = cow_probe,
.bdrv_open = cow_open,
.bdrv_read = cow_read,
.bdrv_write = cow_write,
.bdrv_close = cow_close,
.bdrv_create = cow_create,
.bdrv_flush = cow_flush,
.bdrv_is_allocated = cow_is_allocated,
.create_options = cow_create_options,
};
static void bdrv_cow_init(void)
{
bdrv_register(&bdrv_cow);
}
block_init(bdrv_cow_init);
#endif

View File

@@ -24,10 +24,11 @@
#include "qemu-common.h"
#include "block_int.h"
#include "bswap.h"
#include "module.h"
#include <zlib.h>
typedef struct BDRVDMGState {
int fd;
/* each chunk contains a certain number of sectors,
* offsets[i] is the offset in the .dmg file,
* lengths[i] is the length of the compressed chunk,
@@ -56,75 +57,72 @@ static int dmg_probe(const uint8_t *buf, int buf_size, const char *filename)
return 0;
}
static off_t read_off(BlockDriverState *bs, int64_t offset)
static off_t read_off(int fd)
{
uint64_t buffer;
if (bdrv_pread(bs->file, offset, &buffer, 8) < 8)
if(read(fd,&buffer,8)<8)
return 0;
return be64_to_cpu(buffer);
}
static off_t read_uint32(BlockDriverState *bs, int64_t offset)
static off_t read_uint32(int fd)
{
uint32_t buffer;
if (bdrv_pread(bs->file, offset, &buffer, 4) < 4)
if(read(fd,&buffer,4)<4)
return 0;
return be32_to_cpu(buffer);
}
static int dmg_open(BlockDriverState *bs, int flags)
static int dmg_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVDMGState *s = bs->opaque;
off_t info_begin,info_end,last_in_offset,last_out_offset;
uint32_t count;
uint32_t max_compressed_size=1,max_sectors_per_chunk=1,i;
int64_t offset;
s->fd = open(filename, O_RDONLY | O_BINARY);
if (s->fd < 0)
return -errno;
bs->read_only = 1;
s->n_chunks = 0;
s->offsets = s->lengths = s->sectors = s->sectorcounts = NULL;
s->offsets = s->lengths = s->sectors = s->sectorcounts = 0;
/* read offset of info blocks */
offset = bdrv_getlength(bs->file);
if (offset < 0) {
goto fail;
if(lseek(s->fd,-0x1d8,SEEK_END)<0) {
dmg_close:
close(s->fd);
/* open raw instead */
bs->drv=&bdrv_raw;
return bs->drv->bdrv_open(bs, filename, flags);
}
offset -= 0x1d8;
info_begin = read_off(bs, offset);
if (info_begin == 0) {
goto fail;
}
if (read_uint32(bs, info_begin) != 0x100) {
goto fail;
}
count = read_uint32(bs, info_begin + 4);
if (count == 0) {
goto fail;
}
info_end = info_begin + count;
offset = info_begin + 0x100;
info_begin=read_off(s->fd);
if(info_begin==0)
goto dmg_close;
if(lseek(s->fd,info_begin,SEEK_SET)<0)
goto dmg_close;
if(read_uint32(s->fd)!=0x100)
goto dmg_close;
if((count = read_uint32(s->fd))==0)
goto dmg_close;
info_end = info_begin+count;
if(lseek(s->fd,0xf8,SEEK_CUR)<0)
goto dmg_close;
/* read offsets */
last_in_offset = last_out_offset = 0;
while (offset < info_end) {
while(lseek(s->fd,0,SEEK_CUR)<info_end) {
uint32_t type;
count = read_uint32(bs, offset);
count = read_uint32(s->fd);
if(count==0)
goto fail;
offset += 4;
type = read_uint32(bs, offset);
if (type == 0x6d697368 && count >= 244) {
goto dmg_close;
type = read_uint32(s->fd);
if(type!=0x6d697368 || count<244)
lseek(s->fd,count-4,SEEK_CUR);
else {
int new_size, chunk_count;
offset += 4;
offset += 200;
if(lseek(s->fd,200,SEEK_CUR)<0)
goto dmg_close;
chunk_count = (count-204)/40;
new_size = sizeof(uint64_t) * (s->n_chunks + chunk_count);
s->types = qemu_realloc(s->types, new_size/2);
@@ -134,8 +132,7 @@ static int dmg_open(BlockDriverState *bs, int flags)
s->sectorcounts = qemu_realloc(s->sectorcounts, new_size);
for(i=s->n_chunks;i<s->n_chunks+chunk_count;i++) {
s->types[i] = read_uint32(bs, offset);
offset += 4;
s->types[i] = read_uint32(s->fd);
if(s->types[i]!=0x80000005 && s->types[i]!=1 && s->types[i]!=2) {
if(s->types[i]==0xffffffff) {
last_in_offset = s->offsets[i-1]+s->lengths[i-1];
@@ -143,23 +140,15 @@ static int dmg_open(BlockDriverState *bs, int flags)
}
chunk_count--;
i--;
offset += 36;
if(lseek(s->fd,36,SEEK_CUR)<0)
goto dmg_close;
continue;
}
offset += 4;
s->sectors[i] = last_out_offset+read_off(bs, offset);
offset += 8;
s->sectorcounts[i] = read_off(bs, offset);
offset += 8;
s->offsets[i] = last_in_offset+read_off(bs, offset);
offset += 8;
s->lengths[i] = read_off(bs, offset);
offset += 8;
read_uint32(s->fd);
s->sectors[i] = last_out_offset+read_off(s->fd);
s->sectorcounts[i] = read_off(s->fd);
s->offsets[i] = last_in_offset+read_off(s->fd);
s->lengths[i] = read_off(s->fd);
if(s->lengths[i]>max_compressed_size)
max_compressed_size = s->lengths[i];
if(s->sectorcounts[i]>max_sectors_per_chunk)
@@ -173,13 +162,11 @@ static int dmg_open(BlockDriverState *bs, int flags)
s->compressed_chunk = qemu_malloc(max_compressed_size+1);
s->uncompressed_chunk = qemu_malloc(512*max_sectors_per_chunk);
if(inflateInit(&s->zstream) != Z_OK)
goto fail;
goto dmg_close;
s->current_chunk = s->n_chunks;
return 0;
fail:
return -1;
}
static inline int is_sector_in_chunk(BDRVDMGState* s,
@@ -208,10 +195,8 @@ static inline uint32_t search_chunk(BDRVDMGState* s,int sector_num)
return s->n_chunks; /* error */
}
static inline int dmg_read_chunk(BlockDriverState *bs, int sector_num)
static inline int dmg_read_chunk(BDRVDMGState *s,int sector_num)
{
BDRVDMGState *s = bs->opaque;
if(!is_sector_in_chunk(s,s->current_chunk,sector_num)) {
int ret;
uint32_t chunk = search_chunk(s,sector_num);
@@ -224,12 +209,15 @@ static inline int dmg_read_chunk(BlockDriverState *bs, int sector_num)
case 0x80000005: { /* zlib compressed */
int i;
ret = lseek(s->fd, s->offsets[chunk], SEEK_SET);
if(ret<0)
return -1;
/* we need to buffer, because only the chunk as whole can be
* inflated. */
i=0;
do {
ret = bdrv_pread(bs->file, s->offsets[chunk] + i,
s->compressed_chunk+i, s->lengths[chunk]-i);
ret = read(s->fd, s->compressed_chunk+i, s->lengths[chunk]-i);
if(ret<0 && errno==EINTR)
ret=0;
i+=ret;
@@ -250,8 +238,7 @@ static inline int dmg_read_chunk(BlockDriverState *bs, int sector_num)
return -1;
break; }
case 1: /* copy */
ret = bdrv_pread(bs->file, s->offsets[chunk],
s->uncompressed_chunk, s->lengths[chunk]);
ret = read(s->fd, s->uncompressed_chunk, s->lengths[chunk]);
if (ret != s->lengths[chunk])
return -1;
break;
@@ -272,7 +259,7 @@ static int dmg_read(BlockDriverState *bs, int64_t sector_num,
for(i=0;i<nb_sectors;i++) {
uint32_t sector_offset_in_chunk;
if(dmg_read_chunk(bs, sector_num+i) != 0)
if(dmg_read_chunk(s, sector_num+i) != 0)
return -1;
sector_offset_in_chunk = sector_num+i-s->sectors[s->current_chunk];
memcpy(buf+i*512,s->uncompressed_chunk+sector_offset_in_chunk*512,512);
@@ -283,6 +270,7 @@ static int dmg_read(BlockDriverState *bs, int64_t sector_num,
static void dmg_close(BlockDriverState *bs)
{
BDRVDMGState *s = bs->opaque;
close(s->fd);
if(s->n_chunks>0) {
free(s->types);
free(s->offsets);
@@ -295,18 +283,12 @@ static void dmg_close(BlockDriverState *bs)
inflateEnd(&s->zstream);
}
static BlockDriver bdrv_dmg = {
.format_name = "dmg",
.instance_size = sizeof(BDRVDMGState),
.bdrv_probe = dmg_probe,
.bdrv_open = dmg_open,
.bdrv_read = dmg_read,
.bdrv_close = dmg_close,
BlockDriver bdrv_dmg = {
"dmg",
sizeof(BDRVDMGState),
dmg_probe,
dmg_open,
dmg_read,
NULL,
dmg_close,
};
static void bdrv_dmg_init(void)
{
bdrv_register(&bdrv_dmg);
}
block_init(bdrv_dmg_init);

View File

@@ -1,732 +0,0 @@
/*
* QEMU live block migration
*
* Copyright IBM, Corp. 2009
*
* Authors:
* Liran Schour <lirans@il.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#include "qemu-common.h"
#include "block_int.h"
#include "hw/hw.h"
#include "qemu-queue.h"
#include "qemu-timer.h"
#include "monitor.h"
#include "block-migration.h"
#include "migration.h"
#include "blockdev.h"
#include <assert.h>
#define BLOCK_SIZE (BDRV_SECTORS_PER_DIRTY_CHUNK << BDRV_SECTOR_BITS)
#define BLK_MIG_FLAG_DEVICE_BLOCK 0x01
#define BLK_MIG_FLAG_EOS 0x02
#define BLK_MIG_FLAG_PROGRESS 0x04
#define MAX_IS_ALLOCATED_SEARCH 65536
//#define DEBUG_BLK_MIGRATION
#ifdef DEBUG_BLK_MIGRATION
#define DPRINTF(fmt, ...) \
do { printf("blk_migration: " fmt, ## __VA_ARGS__); } while (0)
#else
#define DPRINTF(fmt, ...) \
do { } while (0)
#endif
typedef struct BlkMigDevState {
BlockDriverState *bs;
int bulk_completed;
int shared_base;
int64_t cur_sector;
int64_t cur_dirty;
int64_t completed_sectors;
int64_t total_sectors;
int64_t dirty;
QSIMPLEQ_ENTRY(BlkMigDevState) entry;
unsigned long *aio_bitmap;
} BlkMigDevState;
typedef struct BlkMigBlock {
uint8_t *buf;
BlkMigDevState *bmds;
int64_t sector;
int nr_sectors;
struct iovec iov;
QEMUIOVector qiov;
BlockDriverAIOCB *aiocb;
int ret;
int64_t time;
QSIMPLEQ_ENTRY(BlkMigBlock) entry;
} BlkMigBlock;
typedef struct BlkMigState {
int blk_enable;
int shared_base;
QSIMPLEQ_HEAD(bmds_list, BlkMigDevState) bmds_list;
QSIMPLEQ_HEAD(blk_list, BlkMigBlock) blk_list;
int submitted;
int read_done;
int transferred;
int64_t total_sector_sum;
int prev_progress;
int bulk_completed;
long double total_time;
int reads;
} BlkMigState;
static BlkMigState block_mig_state;
static void blk_send(QEMUFile *f, BlkMigBlock * blk)
{
int len;
/* sector number and flags */
qemu_put_be64(f, (blk->sector << BDRV_SECTOR_BITS)
| BLK_MIG_FLAG_DEVICE_BLOCK);
/* device name */
len = strlen(blk->bmds->bs->device_name);
qemu_put_byte(f, len);
qemu_put_buffer(f, (uint8_t *)blk->bmds->bs->device_name, len);
qemu_put_buffer(f, blk->buf, BLOCK_SIZE);
}
int blk_mig_active(void)
{
return !QSIMPLEQ_EMPTY(&block_mig_state.bmds_list);
}
uint64_t blk_mig_bytes_transferred(void)
{
BlkMigDevState *bmds;
uint64_t sum = 0;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
sum += bmds->completed_sectors;
}
return sum << BDRV_SECTOR_BITS;
}
uint64_t blk_mig_bytes_remaining(void)
{
return blk_mig_bytes_total() - blk_mig_bytes_transferred();
}
uint64_t blk_mig_bytes_total(void)
{
BlkMigDevState *bmds;
uint64_t sum = 0;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
sum += bmds->total_sectors;
}
return sum << BDRV_SECTOR_BITS;
}
static inline void add_avg_read_time(int64_t time)
{
block_mig_state.reads++;
block_mig_state.total_time += time;
}
static inline long double compute_read_bwidth(void)
{
assert(block_mig_state.total_time != 0);
return (block_mig_state.reads * BLOCK_SIZE)/ block_mig_state.total_time;
}
static int bmds_aio_inflight(BlkMigDevState *bmds, int64_t sector)
{
int64_t chunk = sector / (int64_t)BDRV_SECTORS_PER_DIRTY_CHUNK;
if ((sector << BDRV_SECTOR_BITS) < bdrv_getlength(bmds->bs)) {
return !!(bmds->aio_bitmap[chunk / (sizeof(unsigned long) * 8)] &
(1UL << (chunk % (sizeof(unsigned long) * 8))));
} else {
return 0;
}
}
static void bmds_set_aio_inflight(BlkMigDevState *bmds, int64_t sector_num,
int nb_sectors, int set)
{
int64_t start, end;
unsigned long val, idx, bit;
start = sector_num / BDRV_SECTORS_PER_DIRTY_CHUNK;
end = (sector_num + nb_sectors - 1) / BDRV_SECTORS_PER_DIRTY_CHUNK;
for (; start <= end; start++) {
idx = start / (sizeof(unsigned long) * 8);
bit = start % (sizeof(unsigned long) * 8);
val = bmds->aio_bitmap[idx];
if (set) {
val |= 1UL << bit;
} else {
val &= ~(1UL << bit);
}
bmds->aio_bitmap[idx] = val;
}
}
static void alloc_aio_bitmap(BlkMigDevState *bmds)
{
BlockDriverState *bs = bmds->bs;
int64_t bitmap_size;
bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS) +
BDRV_SECTORS_PER_DIRTY_CHUNK * 8 - 1;
bitmap_size /= BDRV_SECTORS_PER_DIRTY_CHUNK * 8;
bmds->aio_bitmap = qemu_mallocz(bitmap_size);
}
static void blk_mig_read_cb(void *opaque, int ret)
{
BlkMigBlock *blk = opaque;
blk->ret = ret;
blk->time = qemu_get_clock_ns(rt_clock) - blk->time;
add_avg_read_time(blk->time);
QSIMPLEQ_INSERT_TAIL(&block_mig_state.blk_list, blk, entry);
bmds_set_aio_inflight(blk->bmds, blk->sector, blk->nr_sectors, 0);
block_mig_state.submitted--;
block_mig_state.read_done++;
assert(block_mig_state.submitted >= 0);
}
static int mig_save_device_bulk(Monitor *mon, QEMUFile *f,
BlkMigDevState *bmds)
{
int64_t total_sectors = bmds->total_sectors;
int64_t cur_sector = bmds->cur_sector;
BlockDriverState *bs = bmds->bs;
BlkMigBlock *blk;
int nr_sectors;
if (bmds->shared_base) {
while (cur_sector < total_sectors &&
!bdrv_is_allocated(bs, cur_sector, MAX_IS_ALLOCATED_SEARCH,
&nr_sectors)) {
cur_sector += nr_sectors;
}
}
if (cur_sector >= total_sectors) {
bmds->cur_sector = bmds->completed_sectors = total_sectors;
return 1;
}
bmds->completed_sectors = cur_sector;
cur_sector &= ~((int64_t)BDRV_SECTORS_PER_DIRTY_CHUNK - 1);
/* we are going to transfer a full block even if it is not allocated */
nr_sectors = BDRV_SECTORS_PER_DIRTY_CHUNK;
if (total_sectors - cur_sector < BDRV_SECTORS_PER_DIRTY_CHUNK) {
nr_sectors = total_sectors - cur_sector;
}
blk = qemu_malloc(sizeof(BlkMigBlock));
blk->buf = qemu_malloc(BLOCK_SIZE);
blk->bmds = bmds;
blk->sector = cur_sector;
blk->nr_sectors = nr_sectors;
blk->iov.iov_base = blk->buf;
blk->iov.iov_len = nr_sectors * BDRV_SECTOR_SIZE;
qemu_iovec_init_external(&blk->qiov, &blk->iov, 1);
blk->time = qemu_get_clock_ns(rt_clock);
blk->aiocb = bdrv_aio_readv(bs, cur_sector, &blk->qiov,
nr_sectors, blk_mig_read_cb, blk);
if (!blk->aiocb) {
goto error;
}
block_mig_state.submitted++;
bdrv_reset_dirty(bs, cur_sector, nr_sectors);
bmds->cur_sector = cur_sector + nr_sectors;
return (bmds->cur_sector >= total_sectors);
error:
monitor_printf(mon, "Error reading sector %" PRId64 "\n", cur_sector);
qemu_file_set_error(f);
qemu_free(blk->buf);
qemu_free(blk);
return 0;
}
static void set_dirty_tracking(int enable)
{
BlkMigDevState *bmds;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
bdrv_set_dirty_tracking(bmds->bs, enable);
}
}
static void init_blk_migration_it(void *opaque, BlockDriverState *bs)
{
Monitor *mon = opaque;
BlkMigDevState *bmds;
int64_t sectors;
if (!bdrv_is_read_only(bs)) {
sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
if (sectors <= 0) {
return;
}
bmds = qemu_mallocz(sizeof(BlkMigDevState));
bmds->bs = bs;
bmds->bulk_completed = 0;
bmds->total_sectors = sectors;
bmds->completed_sectors = 0;
bmds->shared_base = block_mig_state.shared_base;
alloc_aio_bitmap(bmds);
drive_get_ref(drive_get_by_blockdev(bs));
bdrv_set_in_use(bs, 1);
block_mig_state.total_sector_sum += sectors;
if (bmds->shared_base) {
monitor_printf(mon, "Start migration for %s with shared base "
"image\n",
bs->device_name);
} else {
monitor_printf(mon, "Start full migration for %s\n",
bs->device_name);
}
QSIMPLEQ_INSERT_TAIL(&block_mig_state.bmds_list, bmds, entry);
}
}
static void init_blk_migration(Monitor *mon, QEMUFile *f)
{
block_mig_state.submitted = 0;
block_mig_state.read_done = 0;
block_mig_state.transferred = 0;
block_mig_state.total_sector_sum = 0;
block_mig_state.prev_progress = -1;
block_mig_state.bulk_completed = 0;
block_mig_state.total_time = 0;
block_mig_state.reads = 0;
bdrv_iterate(init_blk_migration_it, mon);
}
static int blk_mig_save_bulked_block(Monitor *mon, QEMUFile *f)
{
int64_t completed_sector_sum = 0;
BlkMigDevState *bmds;
int progress;
int ret = 0;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
if (bmds->bulk_completed == 0) {
if (mig_save_device_bulk(mon, f, bmds) == 1) {
/* completed bulk section for this device */
bmds->bulk_completed = 1;
}
completed_sector_sum += bmds->completed_sectors;
ret = 1;
break;
} else {
completed_sector_sum += bmds->completed_sectors;
}
}
if (block_mig_state.total_sector_sum != 0) {
progress = completed_sector_sum * 100 /
block_mig_state.total_sector_sum;
} else {
progress = 100;
}
if (progress != block_mig_state.prev_progress) {
block_mig_state.prev_progress = progress;
qemu_put_be64(f, (progress << BDRV_SECTOR_BITS)
| BLK_MIG_FLAG_PROGRESS);
monitor_printf(mon, "Completed %d %%\r", progress);
monitor_flush(mon);
}
return ret;
}
static void blk_mig_reset_dirty_cursor(void)
{
BlkMigDevState *bmds;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
bmds->cur_dirty = 0;
}
}
static int mig_save_device_dirty(Monitor *mon, QEMUFile *f,
BlkMigDevState *bmds, int is_async)
{
BlkMigBlock *blk;
int64_t total_sectors = bmds->total_sectors;
int64_t sector;
int nr_sectors;
for (sector = bmds->cur_dirty; sector < bmds->total_sectors;) {
if (bmds_aio_inflight(bmds, sector)) {
qemu_aio_flush();
}
if (bdrv_get_dirty(bmds->bs, sector)) {
if (total_sectors - sector < BDRV_SECTORS_PER_DIRTY_CHUNK) {
nr_sectors = total_sectors - sector;
} else {
nr_sectors = BDRV_SECTORS_PER_DIRTY_CHUNK;
}
blk = qemu_malloc(sizeof(BlkMigBlock));
blk->buf = qemu_malloc(BLOCK_SIZE);
blk->bmds = bmds;
blk->sector = sector;
blk->nr_sectors = nr_sectors;
if (is_async) {
blk->iov.iov_base = blk->buf;
blk->iov.iov_len = nr_sectors * BDRV_SECTOR_SIZE;
qemu_iovec_init_external(&blk->qiov, &blk->iov, 1);
blk->time = qemu_get_clock_ns(rt_clock);
blk->aiocb = bdrv_aio_readv(bmds->bs, sector, &blk->qiov,
nr_sectors, blk_mig_read_cb, blk);
if (!blk->aiocb) {
goto error;
}
block_mig_state.submitted++;
bmds_set_aio_inflight(bmds, sector, nr_sectors, 1);
} else {
if (bdrv_read(bmds->bs, sector, blk->buf,
nr_sectors) < 0) {
goto error;
}
blk_send(f, blk);
qemu_free(blk->buf);
qemu_free(blk);
}
bdrv_reset_dirty(bmds->bs, sector, nr_sectors);
break;
}
sector += BDRV_SECTORS_PER_DIRTY_CHUNK;
bmds->cur_dirty = sector;
}
return (bmds->cur_dirty >= bmds->total_sectors);
error:
monitor_printf(mon, "Error reading sector %" PRId64 "\n", sector);
qemu_file_set_error(f);
qemu_free(blk->buf);
qemu_free(blk);
return 0;
}
static int blk_mig_save_dirty_block(Monitor *mon, QEMUFile *f, int is_async)
{
BlkMigDevState *bmds;
int ret = 0;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
if (mig_save_device_dirty(mon, f, bmds, is_async) == 0) {
ret = 1;
break;
}
}
return ret;
}
static void flush_blks(QEMUFile* f)
{
BlkMigBlock *blk;
DPRINTF("%s Enter submitted %d read_done %d transferred %d\n",
__FUNCTION__, block_mig_state.submitted, block_mig_state.read_done,
block_mig_state.transferred);
while ((blk = QSIMPLEQ_FIRST(&block_mig_state.blk_list)) != NULL) {
if (qemu_file_rate_limit(f)) {
break;
}
if (blk->ret < 0) {
qemu_file_set_error(f);
break;
}
blk_send(f, blk);
QSIMPLEQ_REMOVE_HEAD(&block_mig_state.blk_list, entry);
qemu_free(blk->buf);
qemu_free(blk);
block_mig_state.read_done--;
block_mig_state.transferred++;
assert(block_mig_state.read_done >= 0);
}
DPRINTF("%s Exit submitted %d read_done %d transferred %d\n", __FUNCTION__,
block_mig_state.submitted, block_mig_state.read_done,
block_mig_state.transferred);
}
static int64_t get_remaining_dirty(void)
{
BlkMigDevState *bmds;
int64_t dirty = 0;
QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
dirty += bdrv_get_dirty_count(bmds->bs);
}
return dirty * BLOCK_SIZE;
}
static int is_stage2_completed(void)
{
int64_t remaining_dirty;
long double bwidth;
if (block_mig_state.bulk_completed == 1) {
remaining_dirty = get_remaining_dirty();
if (remaining_dirty == 0) {
return 1;
}
bwidth = compute_read_bwidth();
if ((remaining_dirty / bwidth) <=
migrate_max_downtime()) {
/* finish stage2 because we think that we can finish remaing work
below max_downtime */
return 1;
}
}
return 0;
}
static void blk_mig_cleanup(Monitor *mon)
{
BlkMigDevState *bmds;
BlkMigBlock *blk;
set_dirty_tracking(0);
while ((bmds = QSIMPLEQ_FIRST(&block_mig_state.bmds_list)) != NULL) {
QSIMPLEQ_REMOVE_HEAD(&block_mig_state.bmds_list, entry);
bdrv_set_in_use(bmds->bs, 0);
drive_put_ref(drive_get_by_blockdev(bmds->bs));
qemu_free(bmds->aio_bitmap);
qemu_free(bmds);
}
while ((blk = QSIMPLEQ_FIRST(&block_mig_state.blk_list)) != NULL) {
QSIMPLEQ_REMOVE_HEAD(&block_mig_state.blk_list, entry);
qemu_free(blk->buf);
qemu_free(blk);
}
monitor_printf(mon, "\n");
}
static int block_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque)
{
DPRINTF("Enter save live stage %d submitted %d transferred %d\n",
stage, block_mig_state.submitted, block_mig_state.transferred);
if (stage < 0) {
blk_mig_cleanup(mon);
return 0;
}
if (block_mig_state.blk_enable != 1) {
/* no need to migrate storage */
qemu_put_be64(f, BLK_MIG_FLAG_EOS);
return 1;
}
if (stage == 1) {
init_blk_migration(mon, f);
/* start track dirty blocks */
set_dirty_tracking(1);
}
flush_blks(f);
if (qemu_file_has_error(f)) {
blk_mig_cleanup(mon);
return 0;
}
blk_mig_reset_dirty_cursor();
if (stage == 2) {
/* control the rate of transfer */
while ((block_mig_state.submitted +
block_mig_state.read_done) * BLOCK_SIZE <
qemu_file_get_rate_limit(f)) {
if (block_mig_state.bulk_completed == 0) {
/* first finish the bulk phase */
if (blk_mig_save_bulked_block(mon, f) == 0) {
/* finished saving bulk on all devices */
block_mig_state.bulk_completed = 1;
}
} else {
if (blk_mig_save_dirty_block(mon, f, 1) == 0) {
/* no more dirty blocks */
break;
}
}
}
flush_blks(f);
if (qemu_file_has_error(f)) {
blk_mig_cleanup(mon);
return 0;
}
}
if (stage == 3) {
/* we know for sure that save bulk is completed and
all async read completed */
assert(block_mig_state.submitted == 0);
while (blk_mig_save_dirty_block(mon, f, 0) != 0);
blk_mig_cleanup(mon);
/* report completion */
qemu_put_be64(f, (100 << BDRV_SECTOR_BITS) | BLK_MIG_FLAG_PROGRESS);
if (qemu_file_has_error(f)) {
return 0;
}
monitor_printf(mon, "Block migration completed\n");
}
qemu_put_be64(f, BLK_MIG_FLAG_EOS);
return ((stage == 2) && is_stage2_completed());
}
static int block_load(QEMUFile *f, void *opaque, int version_id)
{
static int banner_printed;
int len, flags;
char device_name[256];
int64_t addr;
BlockDriverState *bs, *bs_prev = NULL;
uint8_t *buf;
int64_t total_sectors = 0;
int nr_sectors;
do {
addr = qemu_get_be64(f);
flags = addr & ~BDRV_SECTOR_MASK;
addr >>= BDRV_SECTOR_BITS;
if (flags & BLK_MIG_FLAG_DEVICE_BLOCK) {
int ret;
/* get device name */
len = qemu_get_byte(f);
qemu_get_buffer(f, (uint8_t *)device_name, len);
device_name[len] = '\0';
bs = bdrv_find(device_name);
if (!bs) {
fprintf(stderr, "Error unknown block device %s\n",
device_name);
return -EINVAL;
}
if (bs != bs_prev) {
bs_prev = bs;
total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
if (total_sectors <= 0) {
error_report("Error getting length of block device %s\n",
device_name);
return -EINVAL;
}
}
if (total_sectors - addr < BDRV_SECTORS_PER_DIRTY_CHUNK) {
nr_sectors = total_sectors - addr;
} else {
nr_sectors = BDRV_SECTORS_PER_DIRTY_CHUNK;
}
buf = qemu_malloc(BLOCK_SIZE);
qemu_get_buffer(f, buf, BLOCK_SIZE);
ret = bdrv_write(bs, addr, buf, nr_sectors);
qemu_free(buf);
if (ret < 0) {
return ret;
}
} else if (flags & BLK_MIG_FLAG_PROGRESS) {
if (!banner_printed) {
printf("Receiving block device images\n");
banner_printed = 1;
}
printf("Completed %d %%%c", (int)addr,
(addr == 100) ? '\n' : '\r');
fflush(stdout);
} else if (!(flags & BLK_MIG_FLAG_EOS)) {
fprintf(stderr, "Unknown flags\n");
return -EINVAL;
}
if (qemu_file_has_error(f)) {
return -EIO;
}
} while (!(flags & BLK_MIG_FLAG_EOS));
return 0;
}
static void block_set_params(int blk_enable, int shared_base, void *opaque)
{
block_mig_state.blk_enable = blk_enable;
block_mig_state.shared_base = shared_base;
/* shared base means that blk_enable = 1 */
block_mig_state.blk_enable |= shared_base;
}
void blk_mig_init(void)
{
QSIMPLEQ_INIT(&block_mig_state.bmds_list);
QSIMPLEQ_INIT(&block_mig_state.blk_list);
register_savevm_live(NULL, "block", 0, 1, block_set_params,
block_save_live, NULL, block_load, &block_mig_state);
}

View File

@@ -1,23 +0,0 @@
/*
* QEMU live block migration
*
* Copyright IBM, Corp. 2009
*
* Authors:
* Liran Schour <lirans@il.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#ifndef BLOCK_MIGRATION_H
#define BLOCK_MIGRATION_H
void blk_mig_init(void);
int blk_mig_active(void);
uint64_t blk_mig_bytes_transferred(void);
uint64_t blk_mig_bytes_remaining(void);
uint64_t blk_mig_bytes_total(void);
#endif /* BLOCK_MIGRATION_H */

View File

@@ -28,13 +28,10 @@
#include "qemu-common.h"
#include "nbd.h"
#include "module.h"
#include <sys/types.h>
#include <unistd.h>
#define EN_OPTSTR ":exportname="
typedef struct BDRVNBDState {
int sock;
off_t size;
@@ -44,81 +41,58 @@ typedef struct BDRVNBDState {
static int nbd_open(BlockDriverState *bs, const char* filename, int flags)
{
BDRVNBDState *s = bs->opaque;
uint32_t nbdflags;
char *file;
char *name;
const char *host;
const char *unixpath;
int sock;
off_t size;
size_t blocksize;
int ret;
int err = -EINVAL;
file = qemu_strdup(filename);
if ((flags & BDRV_O_CREAT))
return -EINVAL;
name = strstr(file, EN_OPTSTR);
if (name) {
if (name[strlen(EN_OPTSTR)] == 0) {
goto out;
}
name[0] = 0;
name += strlen(EN_OPTSTR);
}
if (!strstart(file, "nbd:", &host)) {
goto out;
}
if (!strstart(filename, "nbd:", &host))
return -EINVAL;
if (strstart(host, "unix:", &unixpath)) {
if (unixpath[0] != '/') {
goto out;
}
if (unixpath[0] != '/')
return -EINVAL;
sock = unix_socket_outgoing(unixpath);
} else {
uint16_t port = NBD_DEFAULT_PORT;
uint16_t port;
char *p, *r;
char hostname[128];
pstrcpy(hostname, 128, host);
p = strchr(hostname, ':');
if (p != NULL) {
*p = '\0';
p++;
if (p == NULL)
return -EINVAL;
port = strtol(p, &r, 0);
if (r == p) {
goto out;
}
}
*p = '\0';
p++;
port = strtol(p, &r, 0);
if (r == p)
return -EINVAL;
sock = tcp_socket_outgoing(hostname, port);
}
if (sock == -1) {
err = -errno;
goto out;
}
if (sock == -1)
return -errno;
ret = nbd_receive_negotiate(sock, name, &nbdflags, &size, &blocksize);
if (ret == -1) {
err = -errno;
goto out;
}
ret = nbd_receive_negotiate(sock, &size, &blocksize);
if (ret == -1)
return -errno;
s->sock = sock;
s->size = size;
s->blocksize = blocksize;
err = 0;
out:
qemu_free(file);
return err;
return 0;
}
static int nbd_read(BlockDriverState *bs, int64_t sector_num,
@@ -202,20 +176,14 @@ static int64_t nbd_getlength(BlockDriverState *bs)
return s->size;
}
static BlockDriver bdrv_nbd = {
.format_name = "nbd",
.instance_size = sizeof(BDRVNBDState),
.bdrv_file_open = nbd_open,
.bdrv_read = nbd_read,
.bdrv_write = nbd_write,
.bdrv_close = nbd_close,
.bdrv_getlength = nbd_getlength,
.protocol_name = "nbd",
BlockDriver bdrv_nbd = {
"nbd",
sizeof(BDRVNBDState),
NULL, /* no probe for protocols */
nbd_open,
nbd_read,
nbd_write,
nbd_close,
.bdrv_getlength = nbd_getlength,
.protocol_name = "nbd",
};
static void bdrv_nbd_init(void)
{
bdrv_register(&bdrv_nbd);
}
block_init(bdrv_nbd_init);

View File

@@ -25,7 +25,6 @@
*/
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
/**************************************************************/
@@ -46,6 +45,7 @@ struct parallels_header {
} __attribute__((packed));
typedef struct BDRVParallelsState {
int fd;
uint32_t *catalog_bitmap;
int catalog_size;
@@ -67,15 +67,24 @@ static int parallels_probe(const uint8_t *buf, int buf_size, const char *filenam
return 0;
}
static int parallels_open(BlockDriverState *bs, int flags)
static int parallels_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVParallelsState *s = bs->opaque;
int i;
int fd, i;
struct parallels_header ph;
fd = open(filename, O_RDWR | O_BINARY | O_LARGEFILE);
if (fd < 0) {
fd = open(filename, O_RDONLY | O_BINARY | O_LARGEFILE);
if (fd < 0)
return -1;
}
bs->read_only = 1; // no write support yet
if (bdrv_pread(bs->file, 0, &ph, sizeof(ph)) != sizeof(ph))
s->fd = fd;
if (read(fd, &ph, sizeof(ph)) != sizeof(ph))
goto fail;
if (memcmp(ph.magic, HEADER_MAGIC, 16) ||
@@ -85,11 +94,14 @@ static int parallels_open(BlockDriverState *bs, int flags)
bs->total_sectors = le32_to_cpu(ph.nb_sectors);
if (lseek(s->fd, 64, SEEK_SET) != 64)
goto fail;
s->tracks = le32_to_cpu(ph.tracks);
s->catalog_size = le32_to_cpu(ph.catalog_entries);
s->catalog_bitmap = qemu_malloc(s->catalog_size * 4);
if (bdrv_pread(bs->file, 64, s->catalog_bitmap, s->catalog_size * 4) !=
if (read(s->fd, s->catalog_bitmap, s->catalog_size * 4) !=
s->catalog_size * 4)
goto fail;
for (i = 0; i < s->catalog_size; i++)
@@ -99,34 +111,44 @@ static int parallels_open(BlockDriverState *bs, int flags)
fail:
if (s->catalog_bitmap)
qemu_free(s->catalog_bitmap);
close(fd);
return -1;
}
static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
static inline int seek_to_sector(BlockDriverState *bs, int64_t sector_num)
{
BDRVParallelsState *s = bs->opaque;
uint32_t index, offset;
uint32_t index, offset, position;
index = sector_num / s->tracks;
offset = sector_num % s->tracks;
/* not allocated */
// not allocated
if ((index > s->catalog_size) || (s->catalog_bitmap[index] == 0))
return -1;
return (uint64_t)(s->catalog_bitmap[index] + offset) * 512;
position = (s->catalog_bitmap[index] + offset) * 512;
// fprintf(stderr, "sector: %llx index=%x offset=%x pointer=%x position=%x\n",
// sector_num, index, offset, s->catalog_bitmap[index], position);
if (lseek(s->fd, position, SEEK_SET) != position)
return -1;
return 0;
}
static int parallels_read(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors)
{
BDRVParallelsState *s = bs->opaque;
while (nb_sectors > 0) {
int64_t position = seek_to_sector(bs, sector_num);
if (position >= 0) {
if (bdrv_pread(bs->file, position, buf, 512) != 512)
return -1;
} else {
if (!seek_to_sector(bs, sector_num)) {
if (read(s->fd, buf, 512) != 512)
return -1;
} else
memset(buf, 0, 512);
}
nb_sectors--;
sector_num++;
buf += 512;
@@ -138,20 +160,15 @@ static void parallels_close(BlockDriverState *bs)
{
BDRVParallelsState *s = bs->opaque;
qemu_free(s->catalog_bitmap);
close(s->fd);
}
static BlockDriver bdrv_parallels = {
.format_name = "parallels",
.instance_size = sizeof(BDRVParallelsState),
.bdrv_probe = parallels_probe,
.bdrv_open = parallels_open,
.bdrv_read = parallels_read,
.bdrv_close = parallels_close,
BlockDriver bdrv_parallels = {
"parallels",
sizeof(BDRVParallelsState),
parallels_probe,
parallels_open,
parallels_read,
NULL,
parallels_close,
};
static void bdrv_parallels_init(void)
{
bdrv_register(&bdrv_parallels);
}
block_init(bdrv_parallels_init);

View File

@@ -23,7 +23,6 @@
*/
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
#include <zlib.h>
#include "aes.h"
@@ -54,6 +53,7 @@ typedef struct QCowHeader {
#define L2_CACHE_SIZE 16
typedef struct BDRVQcowState {
BlockDriverState *hd;
int cluster_bits;
int cluster_size;
int cluster_sectors;
@@ -75,7 +75,7 @@ typedef struct BDRVQcowState {
AES_KEY aes_decrypt_key;
} BDRVQcowState;
static int decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset);
static int decompress_cluster(BDRVQcowState *s, uint64_t cluster_offset);
static int qcow_probe(const uint8_t *buf, int buf_size, const char *filename)
{
@@ -89,13 +89,16 @@ static int qcow_probe(const uint8_t *buf, int buf_size, const char *filename)
return 0;
}
static int qcow_open(BlockDriverState *bs, int flags)
static int qcow_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVQcowState *s = bs->opaque;
int len, i, shift;
int len, i, shift, ret;
QCowHeader header;
if (bdrv_pread(bs->file, 0, &header, sizeof(header)) != sizeof(header))
ret = bdrv_file_open(&s->hd, filename, flags);
if (ret < 0)
return ret;
if (bdrv_pread(s->hd, 0, &header, sizeof(header)) != sizeof(header))
goto fail;
be32_to_cpus(&header.magic);
be32_to_cpus(&header.version);
@@ -131,7 +134,7 @@ static int qcow_open(BlockDriverState *bs, int flags)
s->l1_table = qemu_malloc(s->l1_size * sizeof(uint64_t));
if (!s->l1_table)
goto fail;
if (bdrv_pread(bs->file, s->l1_table_offset, s->l1_table, s->l1_size * sizeof(uint64_t)) !=
if (bdrv_pread(s->hd, s->l1_table_offset, s->l1_table, s->l1_size * sizeof(uint64_t)) !=
s->l1_size * sizeof(uint64_t))
goto fail;
for(i = 0;i < s->l1_size; i++) {
@@ -154,7 +157,7 @@ static int qcow_open(BlockDriverState *bs, int flags)
len = header.backing_file_size;
if (len > 1023)
len = 1023;
if (bdrv_pread(bs->file, header.backing_file_offset, bs->backing_file, len) != len)
if (bdrv_pread(s->hd, header.backing_file_offset, bs->backing_file, len) != len)
goto fail;
bs->backing_file[len] = '\0';
}
@@ -165,6 +168,7 @@ static int qcow_open(BlockDriverState *bs, int flags)
qemu_free(s->l2_cache);
qemu_free(s->cluster_cache);
qemu_free(s->cluster_data);
bdrv_delete(s->hd);
return -1;
}
@@ -266,15 +270,14 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
if (!allocate)
return 0;
/* allocate a new l2 entry */
l2_offset = bdrv_getlength(bs->file);
l2_offset = bdrv_getlength(s->hd);
/* round to cluster size */
l2_offset = (l2_offset + s->cluster_size - 1) & ~(s->cluster_size - 1);
/* update the L1 entry */
s->l1_table[l1_index] = l2_offset;
tmp = cpu_to_be64(l2_offset);
if (bdrv_pwrite_sync(bs->file,
s->l1_table_offset + l1_index * sizeof(tmp),
&tmp, sizeof(tmp)) < 0)
if (bdrv_pwrite(s->hd, s->l1_table_offset + l1_index * sizeof(tmp),
&tmp, sizeof(tmp)) != sizeof(tmp))
return 0;
new_l2_table = 1;
}
@@ -302,11 +305,11 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
l2_table = s->l2_cache + (min_index << s->l2_bits);
if (new_l2_table) {
memset(l2_table, 0, s->l2_size * sizeof(uint64_t));
if (bdrv_pwrite_sync(bs->file, l2_offset, l2_table,
s->l2_size * sizeof(uint64_t)) < 0)
if (bdrv_pwrite(s->hd, l2_offset, l2_table, s->l2_size * sizeof(uint64_t)) !=
s->l2_size * sizeof(uint64_t))
return 0;
} else {
if (bdrv_pread(bs->file, l2_offset, l2_table, s->l2_size * sizeof(uint64_t)) !=
if (bdrv_pread(s->hd, l2_offset, l2_table, s->l2_size * sizeof(uint64_t)) !=
s->l2_size * sizeof(uint64_t))
return 0;
}
@@ -325,22 +328,22 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
/* if the cluster is already compressed, we must
decompress it in the case it is not completely
overwritten */
if (decompress_cluster(bs, cluster_offset) < 0)
if (decompress_cluster(s, cluster_offset) < 0)
return 0;
cluster_offset = bdrv_getlength(bs->file);
cluster_offset = bdrv_getlength(s->hd);
cluster_offset = (cluster_offset + s->cluster_size - 1) &
~(s->cluster_size - 1);
/* write the cluster content */
if (bdrv_pwrite(bs->file, cluster_offset, s->cluster_cache, s->cluster_size) !=
if (bdrv_pwrite(s->hd, cluster_offset, s->cluster_cache, s->cluster_size) !=
s->cluster_size)
return -1;
} else {
cluster_offset = bdrv_getlength(bs->file);
cluster_offset = bdrv_getlength(s->hd);
if (allocate == 1) {
/* round to cluster size */
cluster_offset = (cluster_offset + s->cluster_size - 1) &
~(s->cluster_size - 1);
bdrv_truncate(bs->file, cluster_offset + s->cluster_size);
bdrv_truncate(s->hd, cluster_offset + s->cluster_size);
/* if encrypted, we must initialize the cluster
content which won't be written */
if (s->crypt_method &&
@@ -354,7 +357,7 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
s->cluster_data,
s->cluster_data + 512, 1, 1,
&s->aes_encrypt_key);
if (bdrv_pwrite(bs->file, cluster_offset + i * 512,
if (bdrv_pwrite(s->hd, cluster_offset + i * 512,
s->cluster_data, 512) != 512)
return -1;
}
@@ -368,8 +371,8 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
/* update L2 table */
tmp = cpu_to_be64(cluster_offset);
l2_table[l2_index] = tmp;
if (bdrv_pwrite_sync(bs->file, l2_offset + l2_index * sizeof(tmp),
&tmp, sizeof(tmp)) < 0)
if (bdrv_pwrite(s->hd,
l2_offset + l2_index * sizeof(tmp), &tmp, sizeof(tmp)) != sizeof(tmp))
return 0;
}
return cluster_offset;
@@ -418,9 +421,8 @@ static int decompress_buffer(uint8_t *out_buf, int out_buf_size,
return 0;
}
static int decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset)
static int decompress_cluster(BDRVQcowState *s, uint64_t cluster_offset)
{
BDRVQcowState *s = bs->opaque;
int ret, csize;
uint64_t coffset;
@@ -428,7 +430,7 @@ static int decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset)
if (s->cluster_cache_offset != coffset) {
csize = cluster_offset >> (63 - s->cluster_bits);
csize &= (s->cluster_size - 1);
ret = bdrv_pread(bs->file, coffset, s->cluster_data, csize);
ret = bdrv_pread(s->hd, coffset, s->cluster_data, csize);
if (ret != csize)
return -1;
if (decompress_buffer(s->cluster_cache, s->cluster_size,
@@ -465,11 +467,11 @@ static int qcow_read(BlockDriverState *bs, int64_t sector_num,
memset(buf, 0, 512 * n);
}
} else if (cluster_offset & QCOW_OFLAG_COMPRESSED) {
if (decompress_cluster(bs, cluster_offset) < 0)
if (decompress_cluster(s, cluster_offset) < 0)
return -1;
memcpy(buf, s->cluster_cache + index_in_cluster * 512, 512 * n);
} else {
ret = bdrv_pread(bs->file, cluster_offset + index_in_cluster * 512, buf, n * 512);
ret = bdrv_pread(s->hd, cluster_offset + index_in_cluster * 512, buf, n * 512);
if (ret != n * 512)
return -1;
if (s->crypt_method) {
@@ -485,59 +487,52 @@ static int qcow_read(BlockDriverState *bs, int64_t sector_num,
}
#endif
static int qcow_write(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors)
{
BDRVQcowState *s = bs->opaque;
int ret, index_in_cluster, n;
uint64_t cluster_offset;
while (nb_sectors > 0) {
index_in_cluster = sector_num & (s->cluster_sectors - 1);
n = s->cluster_sectors - index_in_cluster;
if (n > nb_sectors)
n = nb_sectors;
cluster_offset = get_cluster_offset(bs, sector_num << 9, 1, 0,
index_in_cluster,
index_in_cluster + n);
if (!cluster_offset)
return -1;
if (s->crypt_method) {
encrypt_sectors(s, sector_num, s->cluster_data, buf, n, 1,
&s->aes_encrypt_key);
ret = bdrv_pwrite(s->hd, cluster_offset + index_in_cluster * 512,
s->cluster_data, n * 512);
} else {
ret = bdrv_pwrite(s->hd, cluster_offset + index_in_cluster * 512, buf, n * 512);
}
if (ret != n * 512)
return -1;
nb_sectors -= n;
sector_num += n;
buf += n * 512;
}
s->cluster_cache_offset = -1; /* disable compressed cache */
return 0;
}
typedef struct QCowAIOCB {
BlockDriverAIOCB common;
int64_t sector_num;
QEMUIOVector *qiov;
uint8_t *buf;
void *orig_buf;
int nb_sectors;
int n;
uint64_t cluster_offset;
uint8_t *cluster_data;
struct iovec hd_iov;
QEMUIOVector hd_qiov;
BlockDriverAIOCB *hd_aiocb;
} QCowAIOCB;
static void qcow_aio_cancel(BlockDriverAIOCB *blockacb)
{
QCowAIOCB *acb = container_of(blockacb, QCowAIOCB, common);
if (acb->hd_aiocb)
bdrv_aio_cancel(acb->hd_aiocb);
qemu_aio_release(acb);
}
static AIOPool qcow_aio_pool = {
.aiocb_size = sizeof(QCowAIOCB),
.cancel = qcow_aio_cancel,
};
static QCowAIOCB *qcow_aio_setup(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque, int is_write)
{
QCowAIOCB *acb;
acb = qemu_aio_get(&qcow_aio_pool, bs, cb, opaque);
if (!acb)
return NULL;
acb->hd_aiocb = NULL;
acb->sector_num = sector_num;
acb->qiov = qiov;
if (qiov->niov > 1) {
acb->buf = acb->orig_buf = qemu_blockalign(bs, qiov->size);
if (is_write)
qemu_iovec_to_buffer(qiov, acb->buf);
} else {
acb->buf = (uint8_t *)qiov->iov->iov_base;
}
acb->nb_sectors = nb_sectors;
acb->n = 0;
acb->cluster_offset = 0;
return acb;
}
static void qcow_aio_read_cb(void *opaque, int ret)
{
QCowAIOCB *acb = opaque;
@@ -546,8 +541,12 @@ static void qcow_aio_read_cb(void *opaque, int ret)
int index_in_cluster;
acb->hd_aiocb = NULL;
if (ret < 0)
goto done;
if (ret < 0) {
fail:
acb->common.cb(acb->common.opaque, ret);
qemu_aio_release(acb);
return;
}
redo:
/* post process the read buffer */
@@ -569,8 +568,9 @@ static void qcow_aio_read_cb(void *opaque, int ret)
if (acb->nb_sectors == 0) {
/* request completed */
ret = 0;
goto done;
acb->common.cb(acb->common.opaque, 0);
qemu_aio_release(acb);
return;
}
/* prepare next AIO request */
@@ -584,13 +584,10 @@ static void qcow_aio_read_cb(void *opaque, int ret)
if (!acb->cluster_offset) {
if (bs->backing_hd) {
/* read from the base image */
acb->hd_iov.iov_base = (void *)acb->buf;
acb->hd_iov.iov_len = acb->n * 512;
qemu_iovec_init_external(&acb->hd_qiov, &acb->hd_iov, 1);
acb->hd_aiocb = bdrv_aio_readv(bs->backing_hd, acb->sector_num,
&acb->hd_qiov, acb->n, qcow_aio_read_cb, acb);
acb->hd_aiocb = bdrv_aio_read(bs->backing_hd,
acb->sector_num, acb->buf, acb->n, qcow_aio_read_cb, acb);
if (acb->hd_aiocb == NULL)
goto done;
goto fail;
} else {
/* Note: in this case, no need to wait */
memset(acb->buf, 0, 512 * acb->n);
@@ -598,46 +595,39 @@ static void qcow_aio_read_cb(void *opaque, int ret)
}
} else if (acb->cluster_offset & QCOW_OFLAG_COMPRESSED) {
/* add AIO support for compressed blocks ? */
if (decompress_cluster(bs, acb->cluster_offset) < 0)
goto done;
if (decompress_cluster(s, acb->cluster_offset) < 0)
goto fail;
memcpy(acb->buf,
s->cluster_cache + index_in_cluster * 512, 512 * acb->n);
goto redo;
} else {
if ((acb->cluster_offset & 511) != 0) {
ret = -EIO;
goto done;
goto fail;
}
acb->hd_iov.iov_base = (void *)acb->buf;
acb->hd_iov.iov_len = acb->n * 512;
qemu_iovec_init_external(&acb->hd_qiov, &acb->hd_iov, 1);
acb->hd_aiocb = bdrv_aio_readv(bs->file,
acb->hd_aiocb = bdrv_aio_read(s->hd,
(acb->cluster_offset >> 9) + index_in_cluster,
&acb->hd_qiov, acb->n, qcow_aio_read_cb, acb);
acb->buf, acb->n, qcow_aio_read_cb, acb);
if (acb->hd_aiocb == NULL)
goto done;
goto fail;
}
return;
done:
if (acb->qiov->niov > 1) {
qemu_iovec_from_buffer(acb->qiov, acb->orig_buf, acb->qiov->size);
qemu_vfree(acb->orig_buf);
}
acb->common.cb(acb->common.opaque, ret);
qemu_aio_release(acb);
}
static BlockDriverAIOCB *qcow_aio_readv(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
static BlockDriverAIOCB *qcow_aio_read(BlockDriverState *bs,
int64_t sector_num, uint8_t *buf, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
QCowAIOCB *acb;
acb = qcow_aio_setup(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
acb = qemu_aio_get(bs, cb, opaque);
if (!acb)
return NULL;
acb->hd_aiocb = NULL;
acb->sector_num = sector_num;
acb->buf = buf;
acb->nb_sectors = nb_sectors;
acb->n = 0;
acb->cluster_offset = 0;
qcow_aio_read_cb(acb, 0);
return &acb->common;
@@ -654,8 +644,12 @@ static void qcow_aio_write_cb(void *opaque, int ret)
acb->hd_aiocb = NULL;
if (ret < 0)
goto done;
if (ret < 0) {
fail:
acb->common.cb(acb->common.opaque, ret);
qemu_aio_release(acb);
return;
}
acb->nb_sectors -= acb->n;
acb->sector_num += acb->n;
@@ -663,8 +657,9 @@ static void qcow_aio_write_cb(void *opaque, int ret)
if (acb->nb_sectors == 0) {
/* request completed */
ret = 0;
goto done;
acb->common.cb(acb->common.opaque, 0);
qemu_aio_release(acb);
return;
}
index_in_cluster = acb->sector_num & (s->cluster_sectors - 1);
@@ -676,14 +671,14 @@ static void qcow_aio_write_cb(void *opaque, int ret)
index_in_cluster + acb->n);
if (!cluster_offset || (cluster_offset & 511) != 0) {
ret = -EIO;
goto done;
goto fail;
}
if (s->crypt_method) {
if (!acb->cluster_data) {
acb->cluster_data = qemu_mallocz(s->cluster_size);
if (!acb->cluster_data) {
ret = -ENOMEM;
goto done;
goto fail;
}
}
encrypt_sectors(s, acb->sector_num, acb->cluster_data, acb->buf,
@@ -692,27 +687,16 @@ static void qcow_aio_write_cb(void *opaque, int ret)
} else {
src_buf = acb->buf;
}
acb->hd_iov.iov_base = (void *)src_buf;
acb->hd_iov.iov_len = acb->n * 512;
qemu_iovec_init_external(&acb->hd_qiov, &acb->hd_iov, 1);
acb->hd_aiocb = bdrv_aio_writev(bs->file,
(cluster_offset >> 9) + index_in_cluster,
&acb->hd_qiov, acb->n,
qcow_aio_write_cb, acb);
acb->hd_aiocb = bdrv_aio_write(s->hd,
(cluster_offset >> 9) + index_in_cluster,
src_buf, acb->n,
qcow_aio_write_cb, acb);
if (acb->hd_aiocb == NULL)
goto done;
return;
done:
if (acb->qiov->niov > 1)
qemu_vfree(acb->orig_buf);
acb->common.cb(acb->common.opaque, ret);
qemu_aio_release(acb);
goto fail;
}
static BlockDriverAIOCB *qcow_aio_writev(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
static BlockDriverAIOCB *qcow_aio_write(BlockDriverState *bs,
int64_t sector_num, const uint8_t *buf, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
BDRVQcowState *s = bs->opaque;
@@ -720,15 +704,27 @@ static BlockDriverAIOCB *qcow_aio_writev(BlockDriverState *bs,
s->cluster_cache_offset = -1; /* disable compressed cache */
acb = qcow_aio_setup(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
acb = qemu_aio_get(bs, cb, opaque);
if (!acb)
return NULL;
acb->hd_aiocb = NULL;
acb->sector_num = sector_num;
acb->buf = (uint8_t *)buf;
acb->nb_sectors = nb_sectors;
acb->n = 0;
qcow_aio_write_cb(acb, 0);
return &acb->common;
}
static void qcow_aio_cancel(BlockDriverAIOCB *blockacb)
{
QCowAIOCB *acb = (QCowAIOCB *)blockacb;
if (acb->hd_aiocb)
bdrv_aio_cancel(acb->hd_aiocb);
qemu_aio_release(acb);
}
static void qcow_close(BlockDriverState *bs)
{
BDRVQcowState *s = bs->opaque;
@@ -736,33 +732,19 @@ static void qcow_close(BlockDriverState *bs)
qemu_free(s->l2_cache);
qemu_free(s->cluster_cache);
qemu_free(s->cluster_data);
bdrv_delete(s->hd);
}
static int qcow_create(const char *filename, QEMUOptionParameter *options)
static int qcow_create(const char *filename, int64_t total_size,
const char *backing_file, int flags)
{
int fd, header_size, backing_filename_len, l1_size, i, shift;
QCowHeader header;
uint64_t tmp;
int64_t total_size = 0;
const char *backing_file = NULL;
int flags = 0;
int ret;
/* Read out options */
while (options && options->name) {
if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
total_size = options->value.n / 512;
} else if (!strcmp(options->name, BLOCK_OPT_BACKING_FILE)) {
backing_file = options->value.s;
} else if (!strcmp(options->name, BLOCK_OPT_ENCRYPT)) {
flags |= options->value.n ? BLOCK_FLAG_ENCRYPT : 0;
}
options++;
}
fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, 0644);
if (fd < 0)
return -errno;
return -1;
memset(&header, 0, sizeof(header));
header.magic = cpu_to_be32(QCOW_MAGIC);
header.version = cpu_to_be32(QCOW_VERSION);
@@ -798,34 +780,17 @@ static int qcow_create(const char *filename, QEMUOptionParameter *options)
}
/* write all the data */
ret = qemu_write_full(fd, &header, sizeof(header));
if (ret != sizeof(header)) {
ret = -errno;
goto exit;
}
write(fd, &header, sizeof(header));
if (backing_file) {
ret = qemu_write_full(fd, backing_file, backing_filename_len);
if (ret != backing_filename_len) {
ret = -errno;
goto exit;
}
write(fd, backing_file, backing_filename_len);
}
lseek(fd, header_size, SEEK_SET);
tmp = 0;
for(i = 0;i < l1_size; i++) {
ret = qemu_write_full(fd, &tmp, sizeof(tmp));
if (ret != sizeof(tmp)) {
ret = -errno;
goto exit;
}
write(fd, &tmp, sizeof(tmp));
}
ret = 0;
exit:
close(fd);
return ret;
return 0;
}
static int qcow_make_empty(BlockDriverState *bs)
@@ -835,10 +800,9 @@ static int qcow_make_empty(BlockDriverState *bs)
int ret;
memset(s->l1_table, 0, l1_length);
if (bdrv_pwrite_sync(bs->file, s->l1_table_offset, s->l1_table,
l1_length) < 0)
return -1;
ret = bdrv_truncate(bs->file, s->l1_table_offset + l1_length);
if (bdrv_pwrite(s->hd, s->l1_table_offset, s->l1_table, l1_length) < 0)
return -1;
ret = bdrv_truncate(s->hd, s->l1_table_offset + l1_length);
if (ret < 0)
return ret;
@@ -894,12 +858,12 @@ static int qcow_write_compressed(BlockDriverState *bs, int64_t sector_num,
if (ret != Z_STREAM_END || out_len >= s->cluster_size) {
/* could not compress: write normal cluster */
bdrv_write(bs, sector_num, buf, s->cluster_sectors);
qcow_write(bs, sector_num, buf, s->cluster_sectors);
} else {
cluster_offset = get_cluster_offset(bs, sector_num << 9, 2,
out_len, 0, 0);
cluster_offset &= s->cluster_offset_mask;
if (bdrv_pwrite(bs->file, cluster_offset, out_buf, out_len) != out_len) {
if (bdrv_pwrite(s->hd, cluster_offset, out_buf, out_len) != out_len) {
qemu_free(out_buf);
return -1;
}
@@ -909,15 +873,10 @@ static int qcow_write_compressed(BlockDriverState *bs, int64_t sector_num,
return 0;
}
static int qcow_flush(BlockDriverState *bs)
static void qcow_flush(BlockDriverState *bs)
{
return bdrv_flush(bs->file);
}
static BlockDriverAIOCB *qcow_aio_flush(BlockDriverState *bs,
BlockDriverCompletionFunc *cb, void *opaque)
{
return bdrv_aio_flush(bs->file, cb, opaque);
BDRVQcowState *s = bs->opaque;
bdrv_flush(s->hd);
}
static int qcow_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
@@ -927,49 +886,24 @@ static int qcow_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
return 0;
}
BlockDriver bdrv_qcow = {
"qcow",
sizeof(BDRVQcowState),
qcow_probe,
qcow_open,
NULL,
NULL,
qcow_close,
qcow_create,
qcow_flush,
qcow_is_allocated,
qcow_set_key,
qcow_make_empty,
static QEMUOptionParameter qcow_create_options[] = {
{
.name = BLOCK_OPT_SIZE,
.type = OPT_SIZE,
.help = "Virtual disk size"
},
{
.name = BLOCK_OPT_BACKING_FILE,
.type = OPT_STRING,
.help = "File name of a base image"
},
{
.name = BLOCK_OPT_ENCRYPT,
.type = OPT_FLAG,
.help = "Encrypt the image"
},
{ NULL }
};
static BlockDriver bdrv_qcow = {
.format_name = "qcow",
.instance_size = sizeof(BDRVQcowState),
.bdrv_probe = qcow_probe,
.bdrv_open = qcow_open,
.bdrv_close = qcow_close,
.bdrv_create = qcow_create,
.bdrv_flush = qcow_flush,
.bdrv_is_allocated = qcow_is_allocated,
.bdrv_set_key = qcow_set_key,
.bdrv_make_empty = qcow_make_empty,
.bdrv_aio_readv = qcow_aio_readv,
.bdrv_aio_writev = qcow_aio_writev,
.bdrv_aio_flush = qcow_aio_flush,
.bdrv_aio_read = qcow_aio_read,
.bdrv_aio_write = qcow_aio_write,
.bdrv_aio_cancel = qcow_aio_cancel,
.aiocb_size = sizeof(QCowAIOCB),
.bdrv_write_compressed = qcow_write_compressed,
.bdrv_get_info = qcow_get_info,
.create_options = qcow_create_options,
.bdrv_get_info = qcow_get_info,
};
static void bdrv_qcow_init(void)
{
bdrv_register(&bdrv_qcow);
}
block_init(bdrv_qcow_init);

2664
block-qcow2.c Normal file

File diff suppressed because it is too large Load Diff

1197
block-raw-posix.c Normal file

File diff suppressed because it is too large Load Diff

View File

@@ -24,10 +24,11 @@
#include "qemu-common.h"
#include "qemu-timer.h"
#include "block_int.h"
#include "module.h"
#include <windows.h>
#include <assert.h>
#include <winioctl.h>
//#define WIN32_AIO
#define FTYPE_FILE 0
#define FTYPE_CD 1
#define FTYPE_HARDDISK 2
@@ -38,6 +39,13 @@ typedef struct BDRVRawState {
char drive_path[16]; /* format: "d:\" */
} BDRVRawState;
typedef struct RawAIOCB {
BlockDriverAIOCB common;
HANDLE hEvent;
OVERLAPPED ov;
int count;
} RawAIOCB;
int qemu_ftruncate64(int fd, int64_t length)
{
LARGE_INTEGER li;
@@ -76,25 +84,33 @@ static int set_sparse(int fd)
static int raw_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVRawState *s = bs->opaque;
int access_flags;
int access_flags, create_flags;
DWORD overlapped;
s->type = FTYPE_FILE;
if (flags & BDRV_O_RDWR) {
if ((flags & BDRV_O_ACCESS) == O_RDWR) {
access_flags = GENERIC_READ | GENERIC_WRITE;
} else {
access_flags = GENERIC_READ;
}
if (flags & BDRV_O_CREAT) {
create_flags = CREATE_ALWAYS;
} else {
create_flags = OPEN_EXISTING;
}
#ifdef WIN32_AIO
overlapped = FILE_FLAG_OVERLAPPED;
#else
overlapped = FILE_ATTRIBUTE_NORMAL;
#endif
if ((flags & BDRV_O_NOCACHE))
overlapped |= FILE_FLAG_NO_BUFFERING | FILE_FLAG_WRITE_THROUGH;
else if (!(flags & BDRV_O_CACHE_WB))
overlapped |= FILE_FLAG_WRITE_THROUGH;
s->hfile = CreateFile(filename, access_flags,
FILE_SHARE_READ, NULL,
OPEN_EXISTING, overlapped, NULL);
create_flags, overlapped, NULL);
if (s->hfile == INVALID_HANDLE_VALUE) {
int err = GetLastError();
@@ -105,59 +121,153 @@ static int raw_open(BlockDriverState *bs, const char *filename, int flags)
return 0;
}
static int raw_read(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors)
static int raw_pread(BlockDriverState *bs, int64_t offset,
uint8_t *buf, int count)
{
BDRVRawState *s = bs->opaque;
OVERLAPPED ov;
DWORD ret_count;
int ret;
int64_t offset = sector_num * 512;
int count = nb_sectors * 512;
memset(&ov, 0, sizeof(ov));
ov.Offset = offset;
ov.OffsetHigh = offset >> 32;
ret = ReadFile(s->hfile, buf, count, &ret_count, &ov);
if (!ret)
return ret_count;
if (ret_count == count)
ret_count = 0;
if (!ret) {
#ifdef WIN32_AIO
ret = GetOverlappedResult(s->hfile, &ov, &ret_count, TRUE);
if (!ret)
return -EIO;
else
#endif
return ret_count;
}
return ret_count;
}
static int raw_write(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors)
static int raw_pwrite(BlockDriverState *bs, int64_t offset,
const uint8_t *buf, int count)
{
BDRVRawState *s = bs->opaque;
OVERLAPPED ov;
DWORD ret_count;
int ret;
int64_t offset = sector_num * 512;
int count = nb_sectors * 512;
memset(&ov, 0, sizeof(ov));
ov.Offset = offset;
ov.OffsetHigh = offset >> 32;
ret = WriteFile(s->hfile, buf, count, &ret_count, &ov);
if (!ret)
return ret_count;
if (ret_count == count)
ret_count = 0;
if (!ret) {
#ifdef WIN32_AIO
ret = GetOverlappedResult(s->hfile, &ov, &ret_count, TRUE);
if (!ret)
return -EIO;
else
#endif
return ret_count;
}
return ret_count;
}
static int raw_flush(BlockDriverState *bs)
#ifdef WIN32_AIO
static void raw_aio_cb(void *opaque)
{
RawAIOCB *acb = opaque;
BlockDriverState *bs = acb->common.bs;
BDRVRawState *s = bs->opaque;
DWORD ret_count;
int ret;
ret = FlushFileBuffers(s->hfile);
if (ret == 0) {
return -EIO;
ret = GetOverlappedResult(s->hfile, &acb->ov, &ret_count, TRUE);
if (!ret || ret_count != acb->count) {
acb->common.cb(acb->common.opaque, -EIO);
} else {
acb->common.cb(acb->common.opaque, 0);
}
}
return 0;
static RawAIOCB *raw_aio_setup(BlockDriverState *bs,
int64_t sector_num, uint8_t *buf, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
RawAIOCB *acb;
int64_t offset;
acb = qemu_aio_get(bs, cb, opaque);
if (acb->hEvent) {
acb->hEvent = CreateEvent(NULL, TRUE, FALSE, NULL);
if (!acb->hEvent) {
qemu_aio_release(acb);
return NULL;
}
}
memset(&acb->ov, 0, sizeof(acb->ov));
offset = sector_num * 512;
acb->ov.Offset = offset;
acb->ov.OffsetHigh = offset >> 32;
acb->ov.hEvent = acb->hEvent;
acb->count = nb_sectors * 512;
qemu_add_wait_object(acb->ov.hEvent, raw_aio_cb, acb);
return acb;
}
static BlockDriverAIOCB *raw_aio_read(BlockDriverState *bs,
int64_t sector_num, uint8_t *buf, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
RawAIOCB *acb;
int ret;
acb = raw_aio_setup(bs, sector_num, buf, nb_sectors, cb, opaque);
if (!acb)
return NULL;
ret = ReadFile(s->hfile, buf, acb->count, NULL, &acb->ov);
if (!ret) {
qemu_aio_release(acb);
return NULL;
}
qemu_aio_release(acb);
return (BlockDriverAIOCB *)acb;
}
static BlockDriverAIOCB *raw_aio_write(BlockDriverState *bs,
int64_t sector_num, uint8_t *buf, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
RawAIOCB *acb;
int ret;
acb = raw_aio_setup(bs, sector_num, buf, nb_sectors, cb, opaque);
if (!acb)
return NULL;
ret = WriteFile(s->hfile, buf, acb->count, NULL, &acb->ov);
if (!ret) {
qemu_aio_release(acb);
return NULL;
}
qemu_aio_release(acb);
return (BlockDriverAIOCB *)acb;
}
static void raw_aio_cancel(BlockDriverAIOCB *blockacb)
{
RawAIOCB *acb = (RawAIOCB *)blockacb;
BlockDriverState *bs = acb->common.bs;
BDRVRawState *s = bs->opaque;
qemu_del_wait_object(acb->ov.hEvent, raw_aio_cb, acb);
/* XXX: if more than one async I/O it is not correct */
CancelIo(s->hfile);
qemu_aio_release(acb);
}
#endif /* #if WIN32_AIO */
static void raw_flush(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
FlushFileBuffers(s->hfile);
}
static void raw_close(BlockDriverState *bs)
@@ -169,7 +279,7 @@ static void raw_close(BlockDriverState *bs)
static int raw_truncate(BlockDriverState *bs, int64_t offset)
{
BDRVRawState *s = bs->opaque;
LONG low, high;
DWORD low, high;
low = offset;
high = offset >> 32;
@@ -191,7 +301,7 @@ static int64_t raw_getlength(BlockDriverState *bs)
switch(s->type) {
case FTYPE_FILE:
l.LowPart = GetFileSize(s->hfile, (PDWORD)&l.HighPart);
l.LowPart = GetFileSize(s->hfile, &l.HighPart);
if (l.LowPart == 0xffffffffUL && GetLastError() != NO_ERROR)
return -EIO;
break;
@@ -213,18 +323,13 @@ static int64_t raw_getlength(BlockDriverState *bs)
return l.QuadPart;
}
static int raw_create(const char *filename, QEMUOptionParameter *options)
static int raw_create(const char *filename, int64_t total_size,
const char *backing_file, int flags)
{
int fd;
int64_t total_size = 0;
/* Read out options */
while (options && options->name) {
if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
total_size = options->value.n / 512;
}
options++;
}
if (flags || backing_file)
return -ENOTSUP;
fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
0644);
@@ -236,29 +341,27 @@ static int raw_create(const char *filename, QEMUOptionParameter *options)
return 0;
}
static QEMUOptionParameter raw_create_options[] = {
{
.name = BLOCK_OPT_SIZE,
.type = OPT_SIZE,
.help = "Virtual disk size"
},
{ NULL }
};
BlockDriver bdrv_raw = {
"raw",
sizeof(BDRVRawState),
NULL, /* no probe for protocols */
raw_open,
NULL,
NULL,
raw_close,
raw_create,
raw_flush,
static BlockDriver bdrv_file = {
.format_name = "file",
.protocol_name = "file",
.instance_size = sizeof(BDRVRawState),
.bdrv_file_open = raw_open,
.bdrv_close = raw_close,
.bdrv_create = raw_create,
.bdrv_flush = raw_flush,
.bdrv_read = raw_read,
.bdrv_write = raw_write,
.bdrv_truncate = raw_truncate,
.bdrv_getlength = raw_getlength,
.create_options = raw_create_options,
#ifdef WIN32_AIO
.bdrv_aio_read = raw_aio_read,
.bdrv_aio_write = raw_aio_write,
.bdrv_aio_cancel = raw_aio_cancel,
.aiocb_size = sizeof(RawAIOCB);
#endif
.bdrv_pread = raw_pread,
.bdrv_pwrite = raw_pwrite,
.bdrv_truncate = raw_truncate,
.bdrv_getlength = raw_getlength,
};
/***********************************************/
@@ -310,15 +413,6 @@ static int find_device_type(BlockDriverState *bs, const char *filename)
}
}
static int hdev_probe_device(const char *filename)
{
if (strstart(filename, "/dev/cdrom", NULL))
return 100;
if (is_windows_drive(filename))
return 100;
return 0;
}
static int hdev_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVRawState *s = bs->opaque;
@@ -341,14 +435,18 @@ static int hdev_open(BlockDriverState *bs, const char *filename, int flags)
}
s->type = find_device_type(bs, filename);
if (flags & BDRV_O_RDWR) {
if ((flags & BDRV_O_ACCESS) == O_RDWR) {
access_flags = GENERIC_READ | GENERIC_WRITE;
} else {
access_flags = GENERIC_READ;
}
create_flags = OPEN_EXISTING;
#ifdef WIN32_AIO
overlapped = FILE_FLAG_OVERLAPPED;
#else
overlapped = FILE_ATTRIBUTE_NORMAL;
#endif
if ((flags & BDRV_O_NOCACHE))
overlapped |= FILE_FLAG_NO_BUFFERING | FILE_FLAG_WRITE_THROUGH;
else if (!(flags & BDRV_O_CACHE_WB))
@@ -401,30 +499,24 @@ static int raw_set_locked(BlockDriverState *bs, int locked)
}
#endif
static int hdev_has_zero_init(BlockDriverState *bs)
{
return 0;
}
BlockDriver bdrv_host_device = {
"host_device",
sizeof(BDRVRawState),
NULL, /* no probe for protocols */
hdev_open,
NULL,
NULL,
raw_close,
NULL,
raw_flush,
static BlockDriver bdrv_host_device = {
.format_name = "host_device",
.protocol_name = "host_device",
.instance_size = sizeof(BDRVRawState),
.bdrv_probe_device = hdev_probe_device,
.bdrv_file_open = hdev_open,
.bdrv_close = raw_close,
.bdrv_flush = raw_flush,
.bdrv_has_zero_init = hdev_has_zero_init,
.bdrv_read = raw_read,
.bdrv_write = raw_write,
.bdrv_getlength = raw_getlength,
#ifdef WIN32_AIO
.bdrv_aio_read = raw_aio_read,
.bdrv_aio_write = raw_aio_write,
.bdrv_aio_cancel = raw_aio_cancel,
.aiocb_size = sizeof(RawAIOCB);
#endif
.bdrv_pread = raw_pread,
.bdrv_pwrite = raw_pwrite,
.bdrv_getlength = raw_getlength,
};
static void bdrv_file_init(void)
{
bdrv_register(&bdrv_file);
bdrv_register(&bdrv_host_device);
}
block_init(bdrv_file_init);

View File

@@ -25,7 +25,6 @@
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
#define VMDK3_MAGIC (('C' << 24) | ('O' << 16) | ('W' << 8) | 'D')
#define VMDK4_MAGIC (('K' << 24) | ('D' << 16) | ('M' << 8) | 'V')
@@ -61,6 +60,7 @@ typedef struct {
#define L2_CACHE_SIZE 16
typedef struct BDRVVmdkState {
BlockDriverState *hd;
int64_t l1_table_offset;
int64_t l1_backup_table_offset;
uint32_t *l1_table;
@@ -75,6 +75,7 @@ typedef struct BDRVVmdkState {
unsigned int cluster_sectors;
uint32_t parent_cid;
int is_parent;
} BDRVVmdkState;
typedef struct VmdkMetaData {
@@ -85,6 +86,14 @@ typedef struct VmdkMetaData {
int valid;
} VmdkMetaData;
typedef struct ActiveBDRVState{
BlockDriverState *hd; // active image handler
uint64_t cluster_offset; // current write offset
}ActiveBDRVState;
static ActiveBDRVState activeBDRV;
static int vmdk_probe(const uint8_t *buf, int buf_size, const char *filename)
{
uint32_t magic;
@@ -107,13 +116,14 @@ static int vmdk_probe(const uint8_t *buf, int buf_size, const char *filename)
static uint32_t vmdk_read_cid(BlockDriverState *bs, int parent)
{
BDRVVmdkState *s = bs->opaque;
char desc[DESC_SIZE];
uint32_t cid;
const char *p_name, *cid_str;
size_t cid_str_size;
/* the descriptor offset = 0x200 */
if (bdrv_pread(bs->file, 0x200, desc, DESC_SIZE) != DESC_SIZE)
if (bdrv_pread(s->hd, 0x200, desc, DESC_SIZE) != DESC_SIZE)
return 0;
if (parent) {
@@ -124,7 +134,7 @@ static uint32_t vmdk_read_cid(BlockDriverState *bs, int parent)
cid_str_size = sizeof("CID");
}
if ((p_name = strstr(desc,cid_str)) != NULL) {
if ((p_name = strstr(desc,cid_str)) != 0) {
p_name += cid_str_size;
sscanf(p_name,"%x",&cid);
}
@@ -134,22 +144,23 @@ static uint32_t vmdk_read_cid(BlockDriverState *bs, int parent)
static int vmdk_write_cid(BlockDriverState *bs, uint32_t cid)
{
BDRVVmdkState *s = bs->opaque;
char desc[DESC_SIZE], tmp_desc[DESC_SIZE];
char *p_name, *tmp_str;
/* the descriptor offset = 0x200 */
if (bdrv_pread(bs->file, 0x200, desc, DESC_SIZE) != DESC_SIZE)
if (bdrv_pread(s->hd, 0x200, desc, DESC_SIZE) != DESC_SIZE)
return -1;
tmp_str = strstr(desc,"parentCID");
pstrcpy(tmp_desc, sizeof(tmp_desc), tmp_str);
if ((p_name = strstr(desc,"CID")) != NULL) {
if ((p_name = strstr(desc,"CID")) != 0) {
p_name += sizeof("CID");
snprintf(p_name, sizeof(desc) - (p_name - desc), "%x\n", cid);
pstrcat(desc, sizeof(desc), tmp_desc);
}
if (bdrv_pwrite_sync(bs->file, 0x200, desc, DESC_SIZE) < 0)
if (bdrv_pwrite(s->hd, 0x200, desc, DESC_SIZE) != DESC_SIZE)
return -1;
return 0;
}
@@ -158,7 +169,7 @@ static int vmdk_is_cid_valid(BlockDriverState *bs)
{
#ifdef CHECK_CID
BDRVVmdkState *s = bs->opaque;
BlockDriverState *p_bs = bs->backing_hd;
BlockDriverState *p_bs = s->hd->backing_hd;
uint32_t cur_pcid;
if (p_bs) {
@@ -175,7 +186,6 @@ static int vmdk_is_cid_valid(BlockDriverState *bs)
static int vmdk_snapshot_create(const char *filename, const char *backing_file)
{
int snp_fd, p_fd;
int ret;
uint32_t p_cid;
char *p_name, *gd_buf, *rgd_buf;
const char *real_filename, *temp_str;
@@ -200,51 +210,36 @@ static int vmdk_snapshot_create(const char *filename, const char *backing_file)
snp_fd = open(filename, O_RDWR | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE, 0644);
if (snp_fd < 0)
return -errno;
return -1;
p_fd = open(backing_file, O_RDONLY | O_BINARY | O_LARGEFILE);
if (p_fd < 0) {
close(snp_fd);
return -errno;
return -1;
}
/* read the header */
if (lseek(p_fd, 0x0, SEEK_SET) == -1) {
ret = -errno;
if (lseek(p_fd, 0x0, SEEK_SET) == -1)
goto fail;
}
if (read(p_fd, hdr, HEADER_SIZE) != HEADER_SIZE) {
ret = -errno;
if (read(p_fd, hdr, HEADER_SIZE) != HEADER_SIZE)
goto fail;
}
/* write the header */
if (lseek(snp_fd, 0x0, SEEK_SET) == -1) {
ret = -errno;
if (lseek(snp_fd, 0x0, SEEK_SET) == -1)
goto fail;
}
if (write(snp_fd, hdr, HEADER_SIZE) == -1) {
ret = -errno;
if (write(snp_fd, hdr, HEADER_SIZE) == -1)
goto fail;
}
memset(&header, 0, sizeof(header));
memcpy(&header,&hdr[4], sizeof(header)); // skip the VMDK4_MAGIC
if (ftruncate(snp_fd, header.grain_offset << 9)) {
ret = -errno;
goto fail;
}
ftruncate(snp_fd, header.grain_offset << 9);
/* the descriptor offset = 0x200 */
if (lseek(p_fd, 0x200, SEEK_SET) == -1) {
ret = -errno;
if (lseek(p_fd, 0x200, SEEK_SET) == -1)
goto fail;
}
if (read(p_fd, p_desc, DESC_SIZE) != DESC_SIZE) {
ret = -errno;
if (read(p_fd, p_desc, DESC_SIZE) != DESC_SIZE)
goto fail;
}
if ((p_name = strstr(p_desc,"CID")) != NULL) {
if ((p_name = strstr(p_desc,"CID")) != 0) {
p_name += sizeof("CID");
sscanf(p_name,"%x",&p_cid);
}
@@ -261,14 +256,10 @@ static int vmdk_snapshot_create(const char *filename, const char *backing_file)
(uint32_t)header.capacity, real_filename);
/* write the descriptor */
if (lseek(snp_fd, 0x200, SEEK_SET) == -1) {
ret = -errno;
if (lseek(snp_fd, 0x200, SEEK_SET) == -1)
goto fail;
}
if (write(snp_fd, s_desc, strlen(s_desc)) == -1) {
ret = -errno;
if (write(snp_fd, s_desc, strlen(s_desc)) == -1)
goto fail;
}
gd_offset = header.gd_offset * SECTOR_SIZE; // offset of GD table
rgd_offset = header.rgd_offset * SECTOR_SIZE; // offset of RGD table
@@ -278,100 +269,122 @@ static int vmdk_snapshot_create(const char *filename, const char *backing_file)
* 512 GTE per GT, each GTE points to grain
*/
gt_size = (int64_t)header.num_gtes_per_gte * header.granularity * SECTOR_SIZE;
if (!gt_size) {
ret = -EINVAL;
if (!gt_size)
goto fail;
}
gde_entries = (uint32_t)(capacity / gt_size); // number of gde/rgde
gd_size = gde_entries * sizeof(uint32_t);
/* write RGD */
rgd_buf = qemu_malloc(gd_size);
if (lseek(p_fd, rgd_offset, SEEK_SET) == -1) {
ret = -errno;
if (lseek(p_fd, rgd_offset, SEEK_SET) == -1)
goto fail_rgd;
}
if (read(p_fd, rgd_buf, gd_size) != gd_size) {
ret = -errno;
if (read(p_fd, rgd_buf, gd_size) != gd_size)
goto fail_rgd;
}
if (lseek(snp_fd, rgd_offset, SEEK_SET) == -1) {
ret = -errno;
if (lseek(snp_fd, rgd_offset, SEEK_SET) == -1)
goto fail_rgd;
}
if (write(snp_fd, rgd_buf, gd_size) == -1) {
ret = -errno;
if (write(snp_fd, rgd_buf, gd_size) == -1)
goto fail_rgd;
}
qemu_free(rgd_buf);
/* write GD */
gd_buf = qemu_malloc(gd_size);
if (lseek(p_fd, gd_offset, SEEK_SET) == -1) {
ret = -errno;
if (lseek(p_fd, gd_offset, SEEK_SET) == -1)
goto fail_gd;
}
if (read(p_fd, gd_buf, gd_size) != gd_size) {
ret = -errno;
if (read(p_fd, gd_buf, gd_size) != gd_size)
goto fail_gd;
}
if (lseek(snp_fd, gd_offset, SEEK_SET) == -1) {
ret = -errno;
if (lseek(snp_fd, gd_offset, SEEK_SET) == -1)
goto fail_gd;
}
if (write(snp_fd, gd_buf, gd_size) == -1) {
ret = -errno;
if (write(snp_fd, gd_buf, gd_size) == -1)
goto fail_gd;
}
ret = 0;
fail_gd:
qemu_free(gd_buf);
fail_rgd:
qemu_free(rgd_buf);
fail:
close(p_fd);
close(snp_fd);
return ret;
return 0;
fail_gd:
qemu_free(gd_buf);
fail_rgd:
qemu_free(rgd_buf);
fail:
close(p_fd);
close(snp_fd);
return -1;
}
static int vmdk_parent_open(BlockDriverState *bs)
static void vmdk_parent_close(BlockDriverState *bs)
{
if (bs->backing_hd)
bdrv_close(bs->backing_hd);
}
static int parent_open = 0;
static int vmdk_parent_open(BlockDriverState *bs, const char * filename)
{
BDRVVmdkState *s = bs->opaque;
char *p_name;
char desc[DESC_SIZE];
char parent_img_name[1024];
/* the descriptor offset = 0x200 */
if (bdrv_pread(bs->file, 0x200, desc, DESC_SIZE) != DESC_SIZE)
if (bdrv_pread(s->hd, 0x200, desc, DESC_SIZE) != DESC_SIZE)
return -1;
if ((p_name = strstr(desc,"parentFileNameHint")) != NULL) {
if ((p_name = strstr(desc,"parentFileNameHint")) != 0) {
char *end_name;
struct stat file_buf;
p_name += sizeof("parentFileNameHint") + 1;
if ((end_name = strchr(p_name,'\"')) == NULL)
if ((end_name = strchr(p_name,'\"')) == 0)
return -1;
if ((end_name - p_name) > sizeof (bs->backing_file) - 1)
if ((end_name - p_name) > sizeof (s->hd->backing_file) - 1)
return -1;
pstrcpy(bs->backing_file, end_name - p_name + 1, p_name);
pstrcpy(s->hd->backing_file, end_name - p_name + 1, p_name);
if (stat(s->hd->backing_file, &file_buf) != 0) {
path_combine(parent_img_name, sizeof(parent_img_name),
filename, s->hd->backing_file);
} else {
pstrcpy(parent_img_name, sizeof(parent_img_name),
s->hd->backing_file);
}
s->hd->backing_hd = bdrv_new("");
if (!s->hd->backing_hd) {
failure:
bdrv_close(s->hd);
return -1;
}
parent_open = 1;
if (bdrv_open(s->hd->backing_hd, parent_img_name, BDRV_O_RDONLY) < 0)
goto failure;
parent_open = 0;
}
return 0;
}
static int vmdk_open(BlockDriverState *bs, int flags)
static int vmdk_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVVmdkState *s = bs->opaque;
uint32_t magic;
int l1_size, i;
int l1_size, i, ret;
if (bdrv_pread(bs->file, 0, &magic, sizeof(magic)) != sizeof(magic))
if (parent_open)
// Parent must be opened as RO.
flags = BDRV_O_RDONLY;
ret = bdrv_file_open(&s->hd, filename, flags);
if (ret < 0)
return ret;
if (bdrv_pread(s->hd, 0, &magic, sizeof(magic)) != sizeof(magic))
goto fail;
magic = be32_to_cpu(magic);
if (magic == VMDK3_MAGIC) {
VMDK3Header header;
if (bdrv_pread(bs->file, sizeof(magic), &header, sizeof(header)) != sizeof(header))
if (bdrv_pread(s->hd, sizeof(magic), &header, sizeof(header)) != sizeof(header))
goto fail;
s->cluster_sectors = le32_to_cpu(header.granularity);
s->l2_size = 1 << 9;
@@ -383,7 +396,7 @@ static int vmdk_open(BlockDriverState *bs, int flags)
} else if (magic == VMDK4_MAGIC) {
VMDK4Header header;
if (bdrv_pread(bs->file, sizeof(magic), &header, sizeof(header)) != sizeof(header))
if (bdrv_pread(s->hd, sizeof(magic), &header, sizeof(header)) != sizeof(header))
goto fail;
bs->total_sectors = le64_to_cpu(header.capacity);
s->cluster_sectors = le64_to_cpu(header.granularity);
@@ -396,8 +409,13 @@ static int vmdk_open(BlockDriverState *bs, int flags)
s->l1_table_offset = le64_to_cpu(header.rgd_offset) << 9;
s->l1_backup_table_offset = le64_to_cpu(header.gd_offset) << 9;
if (parent_open)
s->is_parent = 1;
else
s->is_parent = 0;
// try to open parent images, if exist
if (vmdk_parent_open(bs) != 0)
if (vmdk_parent_open(bs, filename) != 0)
goto fail;
// write the CID once after the image creation
s->parent_cid = vmdk_read_cid(bs,1);
@@ -408,7 +426,7 @@ static int vmdk_open(BlockDriverState *bs, int flags)
/* read the L1 table */
l1_size = s->l1_size * sizeof(uint32_t);
s->l1_table = qemu_malloc(l1_size);
if (bdrv_pread(bs->file, s->l1_table_offset, s->l1_table, l1_size) != l1_size)
if (bdrv_pread(s->hd, s->l1_table_offset, s->l1_table, l1_size) != l1_size)
goto fail;
for(i = 0; i < s->l1_size; i++) {
le32_to_cpus(&s->l1_table[i]);
@@ -416,7 +434,7 @@ static int vmdk_open(BlockDriverState *bs, int flags)
if (s->l1_backup_table_offset) {
s->l1_backup_table = qemu_malloc(l1_size);
if (bdrv_pread(bs->file, s->l1_backup_table_offset, s->l1_backup_table, l1_size) != l1_size)
if (bdrv_pread(s->hd, s->l1_backup_table_offset, s->l1_backup_table, l1_size) != l1_size)
goto fail;
for(i = 0; i < s->l1_size; i++) {
le32_to_cpus(&s->l1_backup_table[i]);
@@ -429,6 +447,7 @@ static int vmdk_open(BlockDriverState *bs, int flags)
qemu_free(s->l1_backup_table);
qemu_free(s->l1_table);
qemu_free(s->l2_cache);
bdrv_delete(s->hd);
return -1;
}
@@ -438,28 +457,29 @@ static uint64_t get_cluster_offset(BlockDriverState *bs, VmdkMetaData *m_data,
static int get_whole_cluster(BlockDriverState *bs, uint64_t cluster_offset,
uint64_t offset, int allocate)
{
uint64_t parent_cluster_offset;
BDRVVmdkState *s = bs->opaque;
uint8_t whole_grain[s->cluster_sectors*512]; // 128 sectors * 512 bytes each = grain size 64KB
// we will be here if it's first write on non-exist grain(cluster).
// try to read from parent image, if exist
if (bs->backing_hd) {
int ret;
if (s->hd->backing_hd) {
BDRVVmdkState *ps = s->hd->backing_hd->opaque;
if (!vmdk_is_cid_valid(bs))
return -1;
ret = bdrv_read(bs->backing_hd, offset >> 9, whole_grain,
s->cluster_sectors);
if (ret < 0) {
return -1;
}
parent_cluster_offset = get_cluster_offset(s->hd->backing_hd, NULL, offset, allocate);
//Write grain only into the active image
ret = bdrv_write(bs->file, cluster_offset, whole_grain,
s->cluster_sectors);
if (ret < 0) {
return -1;
if (parent_cluster_offset) {
BDRVVmdkState *act_s = activeBDRV.hd->opaque;
if (bdrv_pread(ps->hd, parent_cluster_offset, whole_grain, ps->cluster_sectors*512) != ps->cluster_sectors*512)
return -1;
//Write grain only into the active image
if (bdrv_pwrite(act_s->hd, activeBDRV.cluster_offset << 9, whole_grain, sizeof(whole_grain)) != sizeof(whole_grain))
return -1;
}
}
return 0;
@@ -470,14 +490,14 @@ static int vmdk_L2update(BlockDriverState *bs, VmdkMetaData *m_data)
BDRVVmdkState *s = bs->opaque;
/* update L2 table */
if (bdrv_pwrite_sync(bs->file, ((int64_t)m_data->l2_offset * 512) + (m_data->l2_index * sizeof(m_data->offset)),
&(m_data->offset), sizeof(m_data->offset)) < 0)
if (bdrv_pwrite(s->hd, ((int64_t)m_data->l2_offset * 512) + (m_data->l2_index * sizeof(m_data->offset)),
&(m_data->offset), sizeof(m_data->offset)) != sizeof(m_data->offset))
return -1;
/* update backup L2 table */
if (s->l1_backup_table_offset != 0) {
m_data->l2_offset = s->l1_backup_table[m_data->l1_index];
if (bdrv_pwrite_sync(bs->file, ((int64_t)m_data->l2_offset * 512) + (m_data->l2_index * sizeof(m_data->offset)),
&(m_data->offset), sizeof(m_data->offset)) < 0)
if (bdrv_pwrite(s->hd, ((int64_t)m_data->l2_offset * 512) + (m_data->l2_index * sizeof(m_data->offset)),
&(m_data->offset), sizeof(m_data->offset)) != sizeof(m_data->offset))
return -1;
}
@@ -524,7 +544,7 @@ static uint64_t get_cluster_offset(BlockDriverState *bs, VmdkMetaData *m_data,
}
}
l2_table = s->l2_cache + (min_index * s->l2_size);
if (bdrv_pread(bs->file, (int64_t)l2_offset * 512, l2_table, s->l2_size * sizeof(uint32_t)) !=
if (bdrv_pread(s->hd, (int64_t)l2_offset * 512, l2_table, s->l2_size * sizeof(uint32_t)) !=
s->l2_size * sizeof(uint32_t))
return 0;
@@ -537,15 +557,18 @@ static uint64_t get_cluster_offset(BlockDriverState *bs, VmdkMetaData *m_data,
if (!cluster_offset) {
if (!allocate)
return 0;
// Avoid the L2 tables update for the images that have snapshots.
cluster_offset = bdrv_getlength(bs->file);
bdrv_truncate(bs->file, cluster_offset + (s->cluster_sectors << 9));
cluster_offset >>= 9;
tmp = cpu_to_le32(cluster_offset);
l2_table[l2_index] = tmp;
if (!s->is_parent) {
cluster_offset = bdrv_getlength(s->hd);
bdrv_truncate(s->hd, cluster_offset + (s->cluster_sectors << 9));
cluster_offset >>= 9;
tmp = cpu_to_le32(cluster_offset);
l2_table[l2_index] = tmp;
// Save the active image state
activeBDRV.cluster_offset = cluster_offset;
activeBDRV.hd = bs;
}
/* First of all we write grain itself, to avoid race condition
* that may to corrupt the image.
* This problem may occur because of insufficient space on host disk
@@ -597,17 +620,17 @@ static int vmdk_read(BlockDriverState *bs, int64_t sector_num,
n = nb_sectors;
if (!cluster_offset) {
// try to read from parent image, if exist
if (bs->backing_hd) {
if (s->hd->backing_hd) {
if (!vmdk_is_cid_valid(bs))
return -1;
ret = bdrv_read(bs->backing_hd, sector_num, buf, n);
ret = bdrv_read(s->hd->backing_hd, sector_num, buf, n);
if (ret < 0)
return -1;
} else {
memset(buf, 0, 512 * n);
}
} else {
if(bdrv_pread(bs->file, cluster_offset + index_in_cluster * 512, buf, n * 512) != n * 512)
if(bdrv_pread(s->hd, cluster_offset + index_in_cluster * 512, buf, n * 512) != n * 512)
return -1;
}
nb_sectors -= n;
@@ -643,7 +666,7 @@ static int vmdk_write(BlockDriverState *bs, int64_t sector_num,
if (!cluster_offset)
return -1;
if (bdrv_pwrite(bs->file, cluster_offset + index_in_cluster * 512, buf, n * 512) != n * 512)
if (bdrv_pwrite(s->hd, cluster_offset + index_in_cluster * 512, buf, n * 512) != n * 512)
return -1;
if (m_data.valid) {
/* update L2 tables */
@@ -663,7 +686,8 @@ static int vmdk_write(BlockDriverState *bs, int64_t sector_num,
return 0;
}
static int vmdk_create(const char *filename, QEMUOptionParameter *options)
static int vmdk_create(const char *filename, int64_t total_size,
const char *backing_file, int flags)
{
int fd, i;
VMDK4Header header;
@@ -688,22 +712,6 @@ static int vmdk_create(const char *filename, QEMUOptionParameter *options)
"ddb.adapterType = \"ide\"\n";
char desc[1024];
const char *real_filename, *temp_str;
int64_t total_size = 0;
const char *backing_file = NULL;
int flags = 0;
int ret;
// Read out options
while (options && options->name) {
if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
total_size = options->value.n / 512;
} else if (!strcmp(options->name, BLOCK_OPT_BACKING_FILE)) {
backing_file = options->value.s;
} else if (!strcmp(options->name, BLOCK_OPT_COMPAT6)) {
flags |= options->value.n ? BLOCK_FLAG_COMPAT6: 0;
}
options++;
}
/* XXX: add support for backing file */
if (backing_file) {
@@ -713,7 +721,7 @@ static int vmdk_create(const char *filename, QEMUOptionParameter *options)
fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
0644);
if (fd < 0)
return -errno;
return -1;
magic = cpu_to_be32(VMDK4_MAGIC);
memset(&header, 0, sizeof(header));
header.version = cpu_to_le32(1);
@@ -748,44 +756,22 @@ static int vmdk_create(const char *filename, QEMUOptionParameter *options)
header.check_bytes[3] = 0xa;
/* write all the data */
ret = qemu_write_full(fd, &magic, sizeof(magic));
if (ret != sizeof(magic)) {
ret = -errno;
goto exit;
}
ret = qemu_write_full(fd, &header, sizeof(header));
if (ret != sizeof(header)) {
ret = -errno;
goto exit;
}
write(fd, &magic, sizeof(magic));
write(fd, &header, sizeof(header));
ret = ftruncate(fd, header.grain_offset << 9);
if (ret < 0) {
ret = -errno;
goto exit;
}
ftruncate(fd, header.grain_offset << 9);
/* write grain directory */
lseek(fd, le64_to_cpu(header.rgd_offset) << 9, SEEK_SET);
for (i = 0, tmp = header.rgd_offset + gd_size;
i < gt_count; i++, tmp += gt_size) {
ret = qemu_write_full(fd, &tmp, sizeof(tmp));
if (ret != sizeof(tmp)) {
ret = -errno;
goto exit;
}
}
i < gt_count; i++, tmp += gt_size)
write(fd, &tmp, sizeof(tmp));
/* write backup grain directory */
lseek(fd, le64_to_cpu(header.gd_offset) << 9, SEEK_SET);
for (i = 0, tmp = header.gd_offset + gd_size;
i < gt_count; i++, tmp += gt_size) {
ret = qemu_write_full(fd, &tmp, sizeof(tmp));
if (ret != sizeof(tmp)) {
ret = -errno;
goto exit;
}
}
i < gt_count; i++, tmp += gt_size)
write(fd, &tmp, sizeof(tmp));
/* compose the descriptor */
real_filename = filename;
@@ -802,16 +788,10 @@ static int vmdk_create(const char *filename, QEMUOptionParameter *options)
/* write the descriptor */
lseek(fd, le64_to_cpu(header.desc_offset) << 9, SEEK_SET);
ret = qemu_write_full(fd, desc, strlen(desc));
if (ret != strlen(desc)) {
ret = -errno;
goto exit;
}
write(fd, desc, strlen(desc));
ret = 0;
exit:
close(fd);
return ret;
return 0;
}
static void vmdk_close(BlockDriverState *bs)
@@ -820,51 +800,26 @@ static void vmdk_close(BlockDriverState *bs)
qemu_free(s->l1_table);
qemu_free(s->l2_cache);
// try to close parent image, if exist
vmdk_parent_close(s->hd);
bdrv_delete(s->hd);
}
static int vmdk_flush(BlockDriverState *bs)
static void vmdk_flush(BlockDriverState *bs)
{
return bdrv_flush(bs->file);
BDRVVmdkState *s = bs->opaque;
bdrv_flush(s->hd);
}
static QEMUOptionParameter vmdk_create_options[] = {
{
.name = BLOCK_OPT_SIZE,
.type = OPT_SIZE,
.help = "Virtual disk size"
},
{
.name = BLOCK_OPT_BACKING_FILE,
.type = OPT_STRING,
.help = "File name of a base image"
},
{
.name = BLOCK_OPT_COMPAT6,
.type = OPT_FLAG,
.help = "VMDK version 6 image"
},
{ NULL }
BlockDriver bdrv_vmdk = {
"vmdk",
sizeof(BDRVVmdkState),
vmdk_probe,
vmdk_open,
vmdk_read,
vmdk_write,
vmdk_close,
vmdk_create,
vmdk_flush,
vmdk_is_allocated,
};
static BlockDriver bdrv_vmdk = {
.format_name = "vmdk",
.instance_size = sizeof(BDRVVmdkState),
.bdrv_probe = vmdk_probe,
.bdrv_open = vmdk_open,
.bdrv_read = vmdk_read,
.bdrv_write = vmdk_write,
.bdrv_close = vmdk_close,
.bdrv_create = vmdk_create,
.bdrv_flush = vmdk_flush,
.bdrv_is_allocated = vmdk_is_allocated,
.create_options = vmdk_create_options,
};
static void bdrv_vmdk_init(void)
{
bdrv_register(&bdrv_vmdk);
}
block_init(bdrv_vmdk_init);

View File

@@ -1,5 +1,5 @@
/*
* Block driver for Connectix / Microsoft Virtual PC images
* Block driver for Conectix/Microsoft Virtual PC images
*
* Copyright (c) 2005 Alex Beregszaszi
* Copyright (c) 2009 Kevin Wolf <kwolf@suse.de>
@@ -24,7 +24,6 @@
*/
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
/**************************************************************/
@@ -110,6 +109,8 @@ struct vhd_dyndisk_header {
};
typedef struct BDRVVPCState {
BlockDriverState *hd;
uint8_t footer_buf[HEADER_SIZE];
uint64_t free_data_block_offset;
int max_table_entries;
@@ -148,16 +149,20 @@ static int vpc_probe(const uint8_t *buf, int buf_size, const char *filename)
return 0;
}
static int vpc_open(BlockDriverState *bs, int flags)
static int vpc_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVVPCState *s = bs->opaque;
int i;
int ret, i;
struct vhd_footer* footer;
struct vhd_dyndisk_header* dyndisk_header;
uint8_t buf[HEADER_SIZE];
uint32_t checksum;
if (bdrv_pread(bs->file, 0, s->footer_buf, HEADER_SIZE) != HEADER_SIZE)
ret = bdrv_file_open(&s->hd, filename, flags);
if (ret < 0)
return ret;
if (bdrv_pread(s->hd, 0, s->footer_buf, HEADER_SIZE) != HEADER_SIZE)
goto fail;
footer = (struct vhd_footer*) s->footer_buf;
@@ -168,7 +173,7 @@ static int vpc_open(BlockDriverState *bs, int flags)
footer->checksum = 0;
if (vpc_checksum(s->footer_buf, HEADER_SIZE) != checksum)
fprintf(stderr, "block-vpc: The header checksum of '%s' is "
"incorrect.\n", bs->filename);
"incorrect.\n", filename);
// The visible size of a image in Virtual PC depends on the geometry
// rather than on the size stored in the footer (the size in the footer
@@ -176,7 +181,7 @@ static int vpc_open(BlockDriverState *bs, int flags)
bs->total_sectors = (int64_t)
be16_to_cpu(footer->cyls) * footer->heads * footer->secs_per_cyl;
if (bdrv_pread(bs->file, be64_to_cpu(footer->data_offset), buf, HEADER_SIZE)
if (bdrv_pread(s->hd, be64_to_cpu(footer->data_offset), buf, HEADER_SIZE)
!= HEADER_SIZE)
goto fail;
@@ -193,7 +198,7 @@ static int vpc_open(BlockDriverState *bs, int flags)
s->pagetable = qemu_malloc(s->max_table_entries * 4);
s->bat_offset = be64_to_cpu(dyndisk_header->table_offset);
if (bdrv_pread(bs->file, s->bat_offset, s->pagetable,
if (bdrv_pread(s->hd, s->bat_offset, s->pagetable,
s->max_table_entries * 4) != s->max_table_entries * 4)
goto fail;
@@ -222,6 +227,7 @@ static int vpc_open(BlockDriverState *bs, int flags)
return 0;
fail:
bdrv_delete(s->hd);
return -1;
}
@@ -259,7 +265,7 @@ static inline int64_t get_sector_offset(BlockDriverState *bs,
s->last_bitmap_offset = bitmap_offset;
memset(bitmap, 0xff, s->bitmap_size);
bdrv_pwrite_sync(bs->file, bitmap_offset, bitmap, s->bitmap_size);
bdrv_pwrite(s->hd, bitmap_offset, bitmap, s->bitmap_size);
}
// printf("sector: %" PRIx64 ", index: %x, offset: %x, bioff: %" PRIx64 ", bloff: %" PRIx64 "\n",
@@ -309,7 +315,7 @@ static int rewrite_footer(BlockDriverState* bs)
BDRVVPCState *s = bs->opaque;
int64_t offset = s->free_data_block_offset;
ret = bdrv_pwrite_sync(bs->file, offset, s->footer_buf, HEADER_SIZE);
ret = bdrv_pwrite(s->hd, offset, s->footer_buf, HEADER_SIZE);
if (ret < 0)
return ret;
@@ -344,8 +350,7 @@ static int64_t alloc_block(BlockDriverState* bs, int64_t sector_num)
// Initialize the block's bitmap
memset(bitmap, 0xff, s->bitmap_size);
bdrv_pwrite_sync(bs->file, s->free_data_block_offset, bitmap,
s->bitmap_size);
bdrv_pwrite(s->hd, s->free_data_block_offset, bitmap, s->bitmap_size);
// Write new footer (the old one will be overwritten)
s->free_data_block_offset += s->block_size + s->bitmap_size;
@@ -356,7 +361,7 @@ static int64_t alloc_block(BlockDriverState* bs, int64_t sector_num)
// Write BAT entry to disk
bat_offset = s->bat_offset + (4 * index);
bat_value = be32_to_cpu(s->pagetable[index]);
ret = bdrv_pwrite_sync(bs->file, bat_offset, &bat_value, 4);
ret = bdrv_pwrite(s->hd, bat_offset, &bat_value, 4);
if (ret < 0)
goto fail;
@@ -373,30 +378,21 @@ static int vpc_read(BlockDriverState *bs, int64_t sector_num,
BDRVVPCState *s = bs->opaque;
int ret;
int64_t offset;
int64_t sectors, sectors_per_block;
while (nb_sectors > 0) {
offset = get_sector_offset(bs, sector_num, 0);
sectors_per_block = s->block_size >> BDRV_SECTOR_BITS;
sectors = sectors_per_block - (sector_num % sectors_per_block);
if (sectors > nb_sectors) {
sectors = nb_sectors;
}
if (offset == -1) {
memset(buf, 0, sectors * BDRV_SECTOR_SIZE);
memset(buf, 0, 512);
} else {
ret = bdrv_pread(bs->file, offset, buf,
sectors * BDRV_SECTOR_SIZE);
if (ret != sectors * BDRV_SECTOR_SIZE) {
ret = bdrv_pread(s->hd, offset, buf, 512);
if (ret != 512)
return -1;
}
}
nb_sectors -= sectors;
sector_num += sectors;
buf += sectors * BDRV_SECTOR_SIZE;
nb_sectors--;
sector_num++;
buf += 512;
}
return 0;
}
@@ -406,41 +402,29 @@ static int vpc_write(BlockDriverState *bs, int64_t sector_num,
{
BDRVVPCState *s = bs->opaque;
int64_t offset;
int64_t sectors, sectors_per_block;
int ret;
while (nb_sectors > 0) {
offset = get_sector_offset(bs, sector_num, 1);
sectors_per_block = s->block_size >> BDRV_SECTOR_BITS;
sectors = sectors_per_block - (sector_num % sectors_per_block);
if (sectors > nb_sectors) {
sectors = nb_sectors;
}
if (offset == -1) {
offset = alloc_block(bs, sector_num);
if (offset < 0)
return -1;
}
ret = bdrv_pwrite(bs->file, offset, buf, sectors * BDRV_SECTOR_SIZE);
if (ret != sectors * BDRV_SECTOR_SIZE) {
ret = bdrv_pwrite(s->hd, offset, buf, 512);
if (ret != 512)
return -1;
}
nb_sectors -= sectors;
sector_num += sectors;
buf += sectors * BDRV_SECTOR_SIZE;
nb_sectors--;
sector_num++;
buf += 512;
}
return 0;
}
static int vpc_flush(BlockDriverState *bs)
{
return bdrv_flush(bs->file);
}
/*
* Calculates the number of cylinders, heads and sectors per cylinder
@@ -485,56 +469,45 @@ static int calculate_geometry(int64_t total_sectors, uint16_t* cyls,
}
}
*cyls = cyls_times_heads / *heads;
// Note: Rounding up deviates from the Virtual PC behaviour
// However, we need this to avoid truncating images in qemu-img convert
*cyls = (cyls_times_heads + *heads - 1) / *heads;
return 0;
}
static int vpc_create(const char *filename, QEMUOptionParameter *options)
static int vpc_create(const char *filename, int64_t total_sectors,
const char *backing_file, int flags)
{
uint8_t buf[1024];
struct vhd_footer* footer = (struct vhd_footer*) buf;
struct vhd_dyndisk_header* dyndisk_header =
(struct vhd_dyndisk_header*) buf;
int fd, i;
uint16_t cyls = 0;
uint8_t heads = 0;
uint8_t secs_per_cyl = 0;
uint16_t cyls;
uint8_t heads;
uint8_t secs_per_cyl;
size_t block_size, num_bat_entries;
int64_t total_sectors = 0;
int ret = -EIO;
// Read out options
while (options && options->name) {
if (!strcmp(options->name, "size")) {
total_sectors = options->value.n / 512;
}
options++;
}
if (backing_file != NULL)
return -ENOTSUP;
// Create the file
fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, 0644);
if (fd < 0)
return -EIO;
/* Calculate matching total_size and geometry. Increase the number of
sectors requested until we get enough (or fail). */
for (i = 0; total_sectors > (int64_t)cyls * heads * secs_per_cyl; i++) {
if (calculate_geometry(total_sectors + i,
&cyls, &heads, &secs_per_cyl)) {
ret = -EFBIG;
goto fail;
}
}
// Calculate matching total_size and geometry
if (calculate_geometry(total_sectors, &cyls, &heads, &secs_per_cyl))
return -EFBIG;
total_sectors = (int64_t) cyls * heads * secs_per_cyl;
// Prepare the Hard Disk Footer
memset(buf, 0, 1024);
memcpy(footer->creator, "conectix", 8);
strncpy(footer->creator, "conectix", 8);
// TODO Check if "qemu" creator_app is ok for VPC
memcpy(footer->creator_app, "qemu", 4);
memcpy(footer->creator_os, "Wi2k", 4);
strncpy(footer->creator_app, "qemu", 4);
strncpy(footer->creator_os, "Wi2k", 4);
footer->features = be32_to_cpu(0x02);
footer->version = be32_to_cpu(0x00010000);
@@ -562,34 +535,28 @@ static int vpc_create(const char *filename, QEMUOptionParameter *options)
block_size = 0x200000;
num_bat_entries = (total_sectors + block_size / 512) / (block_size / 512);
if (write(fd, buf, HEADER_SIZE) != HEADER_SIZE) {
goto fail;
}
if (write(fd, buf, HEADER_SIZE) != HEADER_SIZE)
return -EIO;
if (lseek(fd, 1536 + ((num_bat_entries * 4 + 511) & ~511), SEEK_SET) < 0) {
goto fail;
}
if (write(fd, buf, HEADER_SIZE) != HEADER_SIZE) {
goto fail;
}
if (lseek(fd, 1536 + ((num_bat_entries * 4 + 511) & ~511), SEEK_SET) < 0)
return -EIO;
if (write(fd, buf, HEADER_SIZE) != HEADER_SIZE)
return -EIO;
// Write the initial BAT
if (lseek(fd, 3 * 512, SEEK_SET) < 0) {
goto fail;
}
if (lseek(fd, 3 * 512, SEEK_SET) < 0)
return -EIO;
memset(buf, 0xFF, 512);
for (i = 0; i < (num_bat_entries * 4 + 511) / 512; i++) {
if (write(fd, buf, 512) != 512) {
goto fail;
}
}
for (i = 0; i < (num_bat_entries * 4 + 511) / 512; i++)
if (write(fd, buf, 512) != 512)
return -EIO;
// Prepare the Dynamic Disk Header
memset(buf, 0, 1024);
memcpy(dyndisk_header->magic, "cxsparse", 8);
strncpy(dyndisk_header->magic, "cxsparse", 8);
dyndisk_header->data_offset = be64_to_cpu(0xFFFFFFFF);
dyndisk_header->table_offset = be64_to_cpu(3 * 512);
@@ -600,18 +567,13 @@ static int vpc_create(const char *filename, QEMUOptionParameter *options)
dyndisk_header->checksum = be32_to_cpu(vpc_checksum(buf, 1024));
// Write the header
if (lseek(fd, 512, SEEK_SET) < 0) {
goto fail;
}
if (lseek(fd, 512, SEEK_SET) < 0)
return -EIO;
if (write(fd, buf, 1024) != 1024)
return -EIO;
if (write(fd, buf, 1024) != 1024) {
goto fail;
}
ret = 0;
fail:
close(fd);
return ret;
return 0;
}
static void vpc_close(BlockDriverState *bs)
@@ -621,34 +583,16 @@ static void vpc_close(BlockDriverState *bs)
#ifdef CACHE
qemu_free(s->pageentry_u8);
#endif
bdrv_delete(s->hd);
}
static QEMUOptionParameter vpc_create_options[] = {
{
.name = BLOCK_OPT_SIZE,
.type = OPT_SIZE,
.help = "Virtual disk size"
},
{ NULL }
BlockDriver bdrv_vpc = {
"vpc",
sizeof(BDRVVPCState),
vpc_probe,
vpc_open,
vpc_read,
vpc_write,
vpc_close,
vpc_create,
};
static BlockDriver bdrv_vpc = {
.format_name = "vpc",
.instance_size = sizeof(BDRVVPCState),
.bdrv_probe = vpc_probe,
.bdrv_open = vpc_open,
.bdrv_read = vpc_read,
.bdrv_write = vpc_write,
.bdrv_flush = vpc_flush,
.bdrv_close = vpc_close,
.bdrv_create = vpc_create,
.create_options = vpc_create_options,
};
static void bdrv_vpc_init(void)
{
bdrv_register(&bdrv_vpc);
}
block_init(bdrv_vpc_init);

View File

@@ -24,9 +24,9 @@
*/
#include <sys/stat.h>
#include <dirent.h>
#include <assert.h>
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
#ifndef S_IWGRP
#define S_IWGRP 0
@@ -78,7 +78,7 @@ typedef struct array_t {
static inline void array_init(array_t* array,unsigned int item_size)
{
array->pointer = NULL;
array->pointer=0;
array->size=0;
array->next=0;
array->item_size=item_size;
@@ -129,7 +129,7 @@ static inline void* array_insert(array_t* array,unsigned int index,unsigned int
int increment=count*array->item_size;
array->pointer=qemu_realloc(array->pointer,array->size+increment);
if(!array->pointer)
return NULL;
return 0;
array->size+=increment;
}
memmove(array->pointer+(index+count)*array->item_size,
@@ -379,7 +379,7 @@ static void init_mbr(BDRVVVFATState* s)
{
/* TODO: if the files mbr.img and bootsect.img exist, use them */
mbr_t* real_mbr=(mbr_t*)s->first_sectors;
partition_t* partition = &(real_mbr->partition[0]);
partition_t* partition=&(real_mbr->partition[0]);
int lba;
memset(s->first_sectors,0,512);
@@ -509,12 +509,9 @@ static inline uint8_t fat_chksum(const direntry_t* entry)
uint8_t chksum=0;
int i;
for(i=0;i<11;i++) {
unsigned char c;
c = (i < 8) ? entry->name[i] : entry->extension[i-8];
chksum=(((chksum&0xfe)>>1)|((chksum&0x01)?0x80:0)) + c;
}
for(i=0;i<11;i++)
chksum=(((chksum&0xfe)>>1)|((chksum&0x01)?0x80:0))
+(unsigned char)entry->name[i];
return chksum;
}
@@ -526,7 +523,7 @@ static uint16_t fat_datetime(time_t time,int return_time) {
t=localtime(&time); /* this is not thread safe */
#else
struct tm t1;
t = &t1;
t=&t1;
localtime_r(&time,t);
#endif
if(return_time)
@@ -607,8 +604,8 @@ static inline direntry_t* create_short_and_long_name(BDRVVVFATState* s,
unsigned int directory_start, const char* filename, int is_dot)
{
int i,j,long_index=s->directory.next;
direntry_t* entry = NULL;
direntry_t* entry_long = NULL;
direntry_t* entry=0;
direntry_t* entry_long=0;
if(is_dot) {
entry=array_get_next(&(s->directory));
@@ -699,7 +696,7 @@ static int read_directory(BDRVVVFATState* s, int mapping_index)
int first_cluster = mapping->begin;
int parent_index = mapping->info.dir.parent_mapping_index;
mapping_t* parent_mapping = (mapping_t*)
(parent_index >= 0 ? array_get(&(s->mapping), parent_index) : NULL);
(parent_index >= 0 ? array_get(&(s->mapping), parent_index) : 0);
int first_cluster_of_parent = parent_mapping ? parent_mapping->begin : -1;
DIR* dir=opendir(dirname);
@@ -756,7 +753,6 @@ static int read_directory(BDRVVVFATState* s, int mapping_index)
if (st.st_size > 0x7fffffff) {
fprintf(stderr, "File %s is larger than 2GB\n", buffer);
free(buffer);
closedir(dir);
return -2;
}
direntry->size=cpu_to_le32(S_ISDIR(st.st_mode)?0:st.st_size);
@@ -869,8 +865,7 @@ static int init_directories(BDRVVVFATState* s,
{
direntry_t* entry=array_get_next(&(s->directory));
entry->attributes=0x28; /* archive | volume label */
memcpy(entry->name,"QEMU VVF",8);
memcpy(entry->extension,"AT ",3);
snprintf((char*)entry->name,11,"QEMU VVFAT");
}
/* Now build FAT, and write back information into directory */
@@ -884,7 +879,7 @@ static int init_directories(BDRVVVFATState* s,
mapping->dir_index = 0;
mapping->info.dir.parent_mapping_index = -1;
mapping->first_mapping_index = -1;
mapping->path = qemu_strdup(dirname);
mapping->path = strdup(dirname);
i = strlen(mapping->path);
if (i > 0 && mapping->path[i - 1] == '/')
mapping->path[i - 1] = '\0';
@@ -1100,8 +1095,8 @@ static inline void vvfat_close_current_file(BDRVVVFATState *s)
*/
static inline int find_mapping_for_cluster_aux(BDRVVVFATState* s,int cluster_num,int index1,int index2)
{
int index3=index1+1;
while(1) {
int index3;
mapping_t* mapping;
index3=(index1+index2)/2;
mapping=array_get(&(s->mapping),index3);
@@ -1130,10 +1125,10 @@ static inline mapping_t* find_mapping_for_cluster(BDRVVVFATState* s,int cluster_
int index=find_mapping_for_cluster_aux(s,cluster_num,0,s->mapping.next);
mapping_t* mapping;
if(index>=s->mapping.next)
return NULL;
return 0;
mapping=array_get(&(s->mapping),index);
if(mapping->begin>cluster_num)
return NULL;
return 0;
assert(mapping->begin<=cluster_num && mapping->end>cluster_num);
return mapping;
}
@@ -1245,7 +1240,7 @@ static void print_direntry(const direntry_t* direntry)
int j = 0;
char buffer[1024];
fprintf(stderr, "direntry %p: ", direntry);
fprintf(stderr, "direntry 0x%x: ", (int)direntry);
if(!direntry)
return;
if(is_long_name(direntry)) {
@@ -1274,11 +1269,7 @@ static void print_direntry(const direntry_t* direntry)
static void print_mapping(const mapping_t* mapping)
{
fprintf(stderr, "mapping (%p): begin, end = %d, %d, dir_index = %d, "
"first_mapping_index = %d, name = %s, mode = 0x%x, " ,
mapping, mapping->begin, mapping->end, mapping->dir_index,
mapping->first_mapping_index, mapping->path, mapping->mode);
fprintf(stderr, "mapping (0x%x): begin, end = %d, %d, dir_index = %d, first_mapping_index = %d, name = %s, mode = 0x%x, " , (int)mapping, mapping->begin, mapping->end, mapping->dir_index, mapping->first_mapping_index, mapping->path, mapping->mode);
if (mapping->mode & MODE_DIRECTORY)
fprintf(stderr, "parent_mapping_index = %d, first_dir_index = %d\n", mapping->info.dir.parent_mapping_index, mapping->info.dir.first_dir_index);
else
@@ -1638,12 +1629,12 @@ static uint32_t get_cluster_count_for_direntry(BDRVVVFATState* s,
/* rename */
if (strcmp(basename, basename2))
schedule_rename(s, cluster_num, qemu_strdup(path));
schedule_rename(s, cluster_num, strdup(path));
} else if (is_file(direntry))
/* new file */
schedule_new_file(s, qemu_strdup(path), cluster_num);
schedule_new_file(s, strdup(path), cluster_num);
else {
abort();
assert(0);
return 0;
}
}
@@ -1664,7 +1655,7 @@ static uint32_t get_cluster_count_for_direntry(BDRVVVFATState* s,
if (offset != mapping->info.file.offset + s->cluster_size
* (cluster_num - mapping->begin)) {
/* offset of this cluster in file chain has changed */
abort();
assert(0);
copy_it = 1;
} else if (offset == 0) {
const char* basename = get_basename(mapping->path);
@@ -1676,7 +1667,7 @@ static uint32_t get_cluster_count_for_direntry(BDRVVVFATState* s,
if (mapping->first_mapping_index != first_mapping_index
&& mapping->info.file.offset > 0) {
abort();
assert(0);
copy_it = 1;
}
@@ -1758,10 +1749,10 @@ static int check_directory_consistency(BDRVVVFATState *s,
mapping->mode &= ~MODE_DELETED;
if (strcmp(basename, basename2))
schedule_rename(s, cluster_num, qemu_strdup(path));
schedule_rename(s, cluster_num, strdup(path));
} else
/* new directory */
schedule_mkdir(s, cluster_num, qemu_strdup(path));
schedule_mkdir(s, cluster_num, strdup(path));
lfn_init(&lfn);
do {
@@ -1787,7 +1778,7 @@ DLOG(fprintf(stderr, "read cluster %d (sector %d)\n", (int)cluster_num, (int)clu
}
for (i = 0; i < 0x10 * s->sectors_per_cluster; i++) {
int cluster_count = 0;
int cluster_count;
DLOG(fprintf(stderr, "check direntry %d: \n", i); print_direntry(direntries + i));
if (is_volume_label(direntries + i) || is_dot(direntries + i) ||
@@ -1842,7 +1833,7 @@ DLOG(fprintf(stderr, "check direntry %d: \n", i); print_direntry(direntries + i)
goto fail;
}
} else
abort(); /* cluster_count = 0; */
assert(0); /* cluster_count = 0; */
ret += cluster_count;
}
@@ -2262,11 +2253,7 @@ static int commit_one_file(BDRVVVFATState* s,
c = c1;
}
if (ftruncate(fd, size)) {
perror("ftruncate()");
close(fd);
return -4;
}
ftruncate(fd, size);
close(fd);
return commit_mappings(s, first_cluster, dir_index);
@@ -2283,6 +2270,7 @@ static void check1(BDRVVVFATState* s)
fprintf(stderr, "deleted\n");
continue;
}
assert(mapping->dir_index >= 0);
assert(mapping->dir_index < s->directory.next);
direntry_t* direntry = array_get(&(s->directory), mapping->dir_index);
assert(mapping->begin == begin_of_direntry(direntry) || mapping->first_mapping_index >= 0);
@@ -2462,17 +2450,14 @@ static int handle_commits(BDRVVVFATState* s)
commit_t* commit = array_get(&(s->commits), i);
switch(commit->action) {
case ACTION_RENAME: case ACTION_MKDIR:
abort();
assert(0);
fail = -2;
break;
case ACTION_WRITEOUT: {
#ifndef NDEBUG
/* these variables are only used by assert() below */
direntry_t* entry = array_get(&(s->directory),
commit->param.writeout.dir_index);
uint32_t begin = begin_of_direntry(entry);
mapping_t* mapping = find_mapping_for_cluster(s, begin);
#endif
assert(mapping);
assert(mapping->begin == begin);
@@ -2523,7 +2508,7 @@ static int handle_commits(BDRVVVFATState* s)
break;
}
default:
abort();
assert(0);
}
}
if (i > 0 && array_remove_slice(&(s->commits), 0, i))
@@ -2611,7 +2596,7 @@ static int do_commit(BDRVVVFATState* s)
ret = handle_renames_and_mkdirs(s);
if (ret) {
fprintf(stderr, "Error handling renames (%d)\n", ret);
abort();
assert(0);
return ret;
}
@@ -2622,21 +2607,21 @@ static int do_commit(BDRVVVFATState* s)
ret = commit_direntries(s, 0, -1);
if (ret) {
fprintf(stderr, "Fatal: error while committing (%d)\n", ret);
abort();
assert(0);
return ret;
}
ret = handle_commits(s);
if (ret) {
fprintf(stderr, "Error handling commits (%d)\n", ret);
abort();
assert(0);
return ret;
}
ret = handle_deletes(s);
if (ret) {
fprintf(stderr, "Error deleting\n");
abort();
assert(0);
return ret;
}
@@ -2665,11 +2650,6 @@ static int vvfat_write(BlockDriverState *bs, int64_t sector_num,
DLOG(checkpoint());
/* Check if we're operating in read-only mode */
if (s->qcow == NULL) {
return -EACCES;
}
vvfat_close_current_file(s);
/*
@@ -2768,27 +2748,25 @@ static int vvfat_is_allocated(BlockDriverState *bs,
static int write_target_commit(BlockDriverState *bs, int64_t sector_num,
const uint8_t* buffer, int nb_sectors) {
BDRVVVFATState* s = *((BDRVVVFATState**) bs->opaque);
BDRVVVFATState* s = bs->opaque;
return try_commit(s);
}
static void write_target_close(BlockDriverState *bs) {
BDRVVVFATState* s = *((BDRVVVFATState**) bs->opaque);
BDRVVVFATState* s = bs->opaque;
bdrv_delete(s->qcow);
free(s->qcow_filename);
}
static BlockDriver vvfat_write_target = {
.format_name = "vvfat_write_target",
.bdrv_write = write_target_commit,
.bdrv_close = write_target_close,
"vvfat_write_target", 0, NULL, NULL, NULL,
write_target_commit,
write_target_close,
NULL, NULL, NULL
};
static int enable_write_target(BDRVVVFATState *s)
{
BlockDriver *bdrv_qcow;
QEMUOptionParameter *options;
int ret;
int size = sector2cluster(s, s->sector_count);
s->used_clusters = calloc(size, 1);
@@ -2796,25 +2774,12 @@ static int enable_write_target(BDRVVVFATState *s)
s->qcow_filename = qemu_malloc(1024);
get_tmp_filename(s->qcow_filename, 1024);
bdrv_qcow = bdrv_find_format("qcow");
options = parse_option_parameters("", bdrv_qcow->create_options, NULL);
set_option_parameter_int(options, BLOCK_OPT_SIZE, s->sector_count * 512);
set_option_parameter(options, BLOCK_OPT_BACKING_FILE, "fat:");
if (bdrv_create(bdrv_qcow, s->qcow_filename, options) < 0)
if (bdrv_create(&bdrv_qcow,
s->qcow_filename, s->sector_count, "fat:", 0) < 0)
return -1;
s->qcow = bdrv_new("");
if (s->qcow == NULL) {
return -1;
}
ret = bdrv_open(s->qcow, s->qcow_filename,
BDRV_O_RDWR | BDRV_O_CACHE_WB | BDRV_O_NO_FLUSH, bdrv_qcow);
if (ret < 0) {
return ret;
}
if (s->qcow == NULL || bdrv_open(s->qcow, s->qcow_filename, 0) < 0)
return -1;
#ifndef _WIN32
unlink(s->qcow_filename);
@@ -2822,8 +2787,7 @@ static int enable_write_target(BDRVVVFATState *s)
s->bs->backing_hd = calloc(sizeof(BlockDriverState), 1);
s->bs->backing_hd->drv = &vvfat_write_target;
s->bs->backing_hd->opaque = qemu_malloc(sizeof(void*));
*(void**)s->bs->backing_hd->opaque = s;
s->bs->backing_hd->opaque = s;
return 0;
}
@@ -2840,24 +2804,20 @@ static void vvfat_close(BlockDriverState *bs)
free(s->cluster_buffer);
}
static BlockDriver bdrv_vvfat = {
.format_name = "vvfat",
.instance_size = sizeof(BDRVVVFATState),
.bdrv_file_open = vvfat_open,
.bdrv_read = vvfat_read,
.bdrv_write = vvfat_write,
.bdrv_close = vvfat_close,
.bdrv_is_allocated = vvfat_is_allocated,
.protocol_name = "fat",
BlockDriver bdrv_vvfat = {
"vvfat",
sizeof(BDRVVVFATState),
NULL, /* no probe for protocols */
vvfat_open,
vvfat_read,
vvfat_write,
vvfat_close,
NULL, /* ??? Not sure if we can do any meaningful flushing. */
NULL,
vvfat_is_allocated,
.protocol_name = "fat",
};
static void bdrv_vvfat_init(void)
{
bdrv_register(&bdrv_vvfat);
}
block_init(bdrv_vvfat_init);
#ifdef DEBUG
static void checkpoint(void) {
assert(((mapping_t*)array_get(&(vvv->mapping), 0))->end == 2);
@@ -2881,7 +2841,7 @@ static void checkpoint(void) {
return;
/* avoid compiler warnings: */
hexdump(NULL, 100);
remove_mapping(vvv, 0);
remove_mapping(vvv, NULL);
print_mapping(NULL);
print_direntry(NULL);
}

2279
block.c

File diff suppressed because it is too large Load Diff

213
block.h
View File

@@ -3,12 +3,24 @@
#include "qemu-aio.h"
#include "qemu-common.h"
#include "qemu-option.h"
#include "qobject.h"
/* block.c */
typedef struct BlockDriver BlockDriver;
extern BlockDriver bdrv_raw;
extern BlockDriver bdrv_host_device;
extern BlockDriver bdrv_cow;
extern BlockDriver bdrv_qcow;
extern BlockDriver bdrv_vmdk;
extern BlockDriver bdrv_cloop;
extern BlockDriver bdrv_dmg;
extern BlockDriver bdrv_bochs;
extern BlockDriver bdrv_vpc;
extern BlockDriver bdrv_vvfat;
extern BlockDriver bdrv_qcow2;
extern BlockDriver bdrv_parallels;
extern BlockDriver bdrv_nbd;
typedef struct BlockDriverInfo {
/* in bytes, 0 if irrelevant */
int cluster_size;
@@ -27,53 +39,36 @@ typedef struct QEMUSnapshotInfo {
uint64_t vm_clock_nsec; /* VM clock relative to boot */
} QEMUSnapshotInfo;
#define BDRV_O_RDONLY 0x0000
#define BDRV_O_RDWR 0x0002
#define BDRV_O_ACCESS 0x0003
#define BDRV_O_CREAT 0x0004 /* create an empty file */
#define BDRV_O_SNAPSHOT 0x0008 /* open the file read only and save writes in a snapshot */
#define BDRV_O_FILE 0x0010 /* open as a raw file (do not try to
use a disk image format on top of
it (default for
bdrv_file_open()) */
#define BDRV_O_NOCACHE 0x0020 /* do not use the host page cache */
#define BDRV_O_CACHE_WB 0x0040 /* use write-back caching */
#define BDRV_O_NATIVE_AIO 0x0080 /* use native AIO instead of the thread pool */
#define BDRV_O_NO_BACKING 0x0100 /* don't open the backing file */
#define BDRV_O_NO_FLUSH 0x0200 /* disable flushing on this disk */
#define BDRV_O_CACHE_DEF 0x0080 /* use default caching */
#define BDRV_O_CACHE_MASK (BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NO_FLUSH)
#define BDRV_O_CACHE_MASK (BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_CACHE_DEF)
#define BDRV_SECTOR_BITS 9
#define BDRV_SECTOR_SIZE (1ULL << BDRV_SECTOR_BITS)
#define BDRV_SECTOR_MASK ~(BDRV_SECTOR_SIZE - 1)
typedef enum {
BLOCK_ERR_REPORT, BLOCK_ERR_IGNORE, BLOCK_ERR_STOP_ENOSPC,
BLOCK_ERR_STOP_ANY
} BlockErrorAction;
typedef enum {
BDRV_ACTION_REPORT, BDRV_ACTION_IGNORE, BDRV_ACTION_STOP
} BlockMonEventAction;
void bdrv_mon_event(const BlockDriverState *bdrv,
BlockMonEventAction action, int is_read);
void bdrv_info_print(Monitor *mon, const QObject *data);
void bdrv_info(Monitor *mon, QObject **ret_data);
void bdrv_stats_print(Monitor *mon, const QObject *data);
void bdrv_info_stats(Monitor *mon, QObject **ret_data);
void bdrv_info(void);
void bdrv_info_stats(void);
void bdrv_init(void);
void bdrv_init_with_whitelist(void);
BlockDriver *bdrv_find_protocol(const char *filename);
BlockDriver *bdrv_find_format(const char *format_name);
BlockDriver *bdrv_find_whitelisted_format(const char *format_name);
int bdrv_create(BlockDriver *drv, const char* filename,
QEMUOptionParameter *options);
int bdrv_create_file(const char* filename, QEMUOptionParameter *options);
int bdrv_create(BlockDriver *drv,
const char *filename, int64_t size_in_sectors,
const char *backing_file, int flags);
BlockDriverState *bdrv_new(const char *device_name);
void bdrv_delete(BlockDriverState *bs);
int bdrv_file_open(BlockDriverState **pbs, const char *filename, int flags);
int bdrv_open(BlockDriverState *bs, const char *filename, int flags,
BlockDriver *drv);
int bdrv_open(BlockDriverState *bs, const char *filename, int flags);
int bdrv_open2(BlockDriverState *bs, const char *filename, int flags,
BlockDriver *drv);
void bdrv_close(BlockDriverState *bs);
int bdrv_attach(BlockDriverState *bs, DeviceState *qdev);
void bdrv_detach(BlockDriverState *bs, DeviceState *qdev);
DeviceState *bdrv_get_attached(BlockDriverState *bs);
int bdrv_read(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors);
int bdrv_write(BlockDriverState *bs, int64_t sector_num,
@@ -82,72 +77,34 @@ int bdrv_pread(BlockDriverState *bs, int64_t offset,
void *buf, int count);
int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
const void *buf, int count);
int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
const void *buf, int count);
int bdrv_write_sync(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors);
int bdrv_truncate(BlockDriverState *bs, int64_t offset);
int64_t bdrv_getlength(BlockDriverState *bs);
void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr);
void bdrv_guess_geometry(BlockDriverState *bs, int *pcyls, int *pheads, int *psecs);
int bdrv_commit(BlockDriverState *bs);
void bdrv_commit_all(void);
int bdrv_change_backing_file(BlockDriverState *bs,
const char *backing_file, const char *backing_fmt);
void bdrv_register(BlockDriver *bdrv);
typedef struct BdrvCheckResult {
int corruptions;
int leaks;
int check_errors;
} BdrvCheckResult;
int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res);
/* async block I/O */
typedef struct BlockDriverAIOCB BlockDriverAIOCB;
typedef void BlockDriverCompletionFunc(void *opaque, int ret);
typedef void BlockDriverDirtyHandler(BlockDriverState *bs, int64_t sector,
int sector_num);
BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
QEMUIOVector *iov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
QEMUIOVector *iov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
BlockDriverCompletionFunc *cb, void *opaque);
BlockDriverAIOCB *bdrv_aio_read(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
BlockDriverAIOCB *bdrv_aio_write(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
void bdrv_aio_cancel(BlockDriverAIOCB *acb);
typedef struct BlockRequest {
/* Fields to be filled by multiwrite caller */
int64_t sector;
int nb_sectors;
QEMUIOVector *qiov;
BlockDriverCompletionFunc *cb;
void *opaque;
/* Filled by multiwrite implementation */
int error;
} BlockRequest;
int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs,
int num_reqs);
/* sg packet commands */
int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf);
BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
unsigned long int req, void *buf,
BlockDriverCompletionFunc *cb, void *opaque);
/* Ensure contents are flushed to disk. */
int bdrv_flush(BlockDriverState *bs);
void bdrv_flush(BlockDriverState *bs);
void bdrv_flush_all(void);
void bdrv_close_all(void);
int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors);
int bdrv_has_zero_init(BlockDriverState *bs);
int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
int *pnum);
@@ -168,25 +125,18 @@ void bdrv_get_geometry_hint(BlockDriverState *bs,
int *pcyls, int *pheads, int *psecs);
int bdrv_get_type_hint(BlockDriverState *bs);
int bdrv_get_translation_hint(BlockDriverState *bs);
void bdrv_set_on_error(BlockDriverState *bs, BlockErrorAction on_read_error,
BlockErrorAction on_write_error);
BlockErrorAction bdrv_get_on_error(BlockDriverState *bs, int is_read);
void bdrv_set_removable(BlockDriverState *bs, int removable);
int bdrv_is_removable(BlockDriverState *bs);
int bdrv_is_read_only(BlockDriverState *bs);
int bdrv_is_sg(BlockDriverState *bs);
int bdrv_enable_write_cache(BlockDriverState *bs);
int bdrv_is_inserted(BlockDriverState *bs);
int bdrv_media_changed(BlockDriverState *bs);
int bdrv_is_locked(BlockDriverState *bs);
void bdrv_set_locked(BlockDriverState *bs, int locked);
int bdrv_eject(BlockDriverState *bs, int eject_flag);
void bdrv_eject(BlockDriverState *bs, int eject_flag);
void bdrv_set_change_cb(BlockDriverState *bs,
void (*change_cb)(void *opaque, int reason),
void *opaque);
void (*change_cb)(void *opaque), void *opaque);
void bdrv_get_format(BlockDriverState *bs, char *buf, int buf_size);
BlockDriverState *bdrv_find(const char *name);
BlockDriverState *bdrv_next(BlockDriverState *bs);
void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs),
void *opaque);
int bdrv_is_encrypted(BlockDriverState *bs);
@@ -203,9 +153,6 @@ int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi);
const char *bdrv_get_encrypted_filename(BlockDriverState *bs);
void bdrv_get_backing_filename(BlockDriverState *bs,
char *filename, int filename_size);
int bdrv_can_snapshot(BlockDriverState *bs);
int bdrv_is_snapshot(BlockDriverState *bs);
BlockDriverState *bdrv_snapshots(void);
int bdrv_snapshot_create(BlockDriverState *bs,
QEMUSnapshotInfo *sn_info);
int bdrv_snapshot_goto(BlockDriverState *bs,
@@ -213,9 +160,8 @@ int bdrv_snapshot_goto(BlockDriverState *bs,
int bdrv_snapshot_delete(BlockDriverState *bs, const char *snapshot_id);
int bdrv_snapshot_list(BlockDriverState *bs,
QEMUSnapshotInfo **psn_info);
int bdrv_snapshot_load_tmp(BlockDriverState *bs,
const char *snapshot_name);
char *bdrv_snapshot_dump(char *buf, int buf_size, QEMUSnapshotInfo *sn);
int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf);
char *get_human_readable_size(char *buf, int buf_size, int64_t size);
int path_is_absolute(const char *path);
@@ -223,76 +169,9 @@ void path_combine(char *dest, int dest_size,
const char *base_path,
const char *filename);
int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
int64_t pos, int size);
int bdrv_put_buffer(BlockDriverState *bs, const uint8_t *buf,
int64_t pos, int size);
int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
int64_t pos, int size);
int bdrv_img_create(const char *filename, const char *fmt,
const char *base_filename, const char *base_fmt,
char *options, uint64_t img_size, int flags);
#define BDRV_SECTORS_PER_DIRTY_CHUNK 2048
void bdrv_set_dirty_tracking(BlockDriverState *bs, int enable);
int bdrv_get_dirty(BlockDriverState *bs, int64_t sector);
void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector,
int nr_sectors);
int64_t bdrv_get_dirty_count(BlockDriverState *bs);
void bdrv_set_in_use(BlockDriverState *bs, int in_use);
int bdrv_in_use(BlockDriverState *bs);
typedef enum {
BLKDBG_L1_UPDATE,
BLKDBG_L1_GROW_ALLOC_TABLE,
BLKDBG_L1_GROW_WRITE_TABLE,
BLKDBG_L1_GROW_ACTIVATE_TABLE,
BLKDBG_L2_LOAD,
BLKDBG_L2_UPDATE,
BLKDBG_L2_UPDATE_COMPRESSED,
BLKDBG_L2_ALLOC_COW_READ,
BLKDBG_L2_ALLOC_WRITE,
BLKDBG_READ,
BLKDBG_READ_AIO,
BLKDBG_READ_BACKING,
BLKDBG_READ_BACKING_AIO,
BLKDBG_READ_COMPRESSED,
BLKDBG_WRITE_AIO,
BLKDBG_WRITE_COMPRESSED,
BLKDBG_VMSTATE_LOAD,
BLKDBG_VMSTATE_SAVE,
BLKDBG_COW_READ,
BLKDBG_COW_WRITE,
BLKDBG_REFTABLE_LOAD,
BLKDBG_REFTABLE_GROW,
BLKDBG_REFBLOCK_LOAD,
BLKDBG_REFBLOCK_UPDATE,
BLKDBG_REFBLOCK_UPDATE_PART,
BLKDBG_REFBLOCK_ALLOC,
BLKDBG_REFBLOCK_ALLOC_HOOKUP,
BLKDBG_REFBLOCK_ALLOC_WRITE,
BLKDBG_REFBLOCK_ALLOC_WRITE_BLOCKS,
BLKDBG_REFBLOCK_ALLOC_WRITE_TABLE,
BLKDBG_REFBLOCK_ALLOC_SWITCH_TABLE,
BLKDBG_CLUSTER_ALLOC,
BLKDBG_CLUSTER_ALLOC_BYTES,
BLKDBG_CLUSTER_FREE,
BLKDBG_EVENT_MAX,
} BlkDebugEvent;
#define BLKDBG_EVENT(bs, evt) bdrv_debug_event(bs, evt)
void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event);
int bdrv_get_buffer(BlockDriverState *bs, uint8_t *buf, int64_t pos, int size);
#endif

View File

@@ -1,471 +0,0 @@
/*
* Block protocol for I/O error injection
*
* Copyright (c) 2010 Kevin Wolf <kwolf@redhat.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
typedef struct BlkdebugVars {
int state;
/* If inject_errno != 0, an error is injected for requests */
int inject_errno;
/* Decides if all future requests fail (false) or only the next one and
* after the next request inject_errno is reset to 0 (true) */
bool inject_once;
/* Decides if aio_readv/writev fails right away (true) or returns an error
* return value only in the callback (false) */
bool inject_immediately;
} BlkdebugVars;
typedef struct BDRVBlkdebugState {
BlkdebugVars vars;
QLIST_HEAD(list, BlkdebugRule) rules[BLKDBG_EVENT_MAX];
} BDRVBlkdebugState;
typedef struct BlkdebugAIOCB {
BlockDriverAIOCB common;
QEMUBH *bh;
int ret;
} BlkdebugAIOCB;
static void blkdebug_aio_cancel(BlockDriverAIOCB *blockacb);
static AIOPool blkdebug_aio_pool = {
.aiocb_size = sizeof(BlkdebugAIOCB),
.cancel = blkdebug_aio_cancel,
};
enum {
ACTION_INJECT_ERROR,
ACTION_SET_STATE,
};
typedef struct BlkdebugRule {
BlkDebugEvent event;
int action;
int state;
union {
struct {
int error;
int immediately;
int once;
} inject;
struct {
int new_state;
} set_state;
} options;
QLIST_ENTRY(BlkdebugRule) next;
} BlkdebugRule;
static QemuOptsList inject_error_opts = {
.name = "inject-error",
.head = QTAILQ_HEAD_INITIALIZER(inject_error_opts.head),
.desc = {
{
.name = "event",
.type = QEMU_OPT_STRING,
},
{
.name = "state",
.type = QEMU_OPT_NUMBER,
},
{
.name = "errno",
.type = QEMU_OPT_NUMBER,
},
{
.name = "once",
.type = QEMU_OPT_BOOL,
},
{
.name = "immediately",
.type = QEMU_OPT_BOOL,
},
{ /* end of list */ }
},
};
static QemuOptsList set_state_opts = {
.name = "set-state",
.head = QTAILQ_HEAD_INITIALIZER(set_state_opts.head),
.desc = {
{
.name = "event",
.type = QEMU_OPT_STRING,
},
{
.name = "state",
.type = QEMU_OPT_NUMBER,
},
{
.name = "new_state",
.type = QEMU_OPT_NUMBER,
},
{ /* end of list */ }
},
};
static QemuOptsList *config_groups[] = {
&inject_error_opts,
&set_state_opts,
NULL
};
static const char *event_names[BLKDBG_EVENT_MAX] = {
[BLKDBG_L1_UPDATE] = "l1_update",
[BLKDBG_L1_GROW_ALLOC_TABLE] = "l1_grow.alloc_table",
[BLKDBG_L1_GROW_WRITE_TABLE] = "l1_grow.write_table",
[BLKDBG_L1_GROW_ACTIVATE_TABLE] = "l1_grow.activate_table",
[BLKDBG_L2_LOAD] = "l2_load",
[BLKDBG_L2_UPDATE] = "l2_update",
[BLKDBG_L2_UPDATE_COMPRESSED] = "l2_update_compressed",
[BLKDBG_L2_ALLOC_COW_READ] = "l2_alloc.cow_read",
[BLKDBG_L2_ALLOC_WRITE] = "l2_alloc.write",
[BLKDBG_READ] = "read",
[BLKDBG_READ_AIO] = "read_aio",
[BLKDBG_READ_BACKING] = "read_backing",
[BLKDBG_READ_BACKING_AIO] = "read_backing_aio",
[BLKDBG_READ_COMPRESSED] = "read_compressed",
[BLKDBG_WRITE_AIO] = "write_aio",
[BLKDBG_WRITE_COMPRESSED] = "write_compressed",
[BLKDBG_VMSTATE_LOAD] = "vmstate_load",
[BLKDBG_VMSTATE_SAVE] = "vmstate_save",
[BLKDBG_COW_READ] = "cow_read",
[BLKDBG_COW_WRITE] = "cow_write",
[BLKDBG_REFTABLE_LOAD] = "reftable_load",
[BLKDBG_REFTABLE_GROW] = "reftable_grow",
[BLKDBG_REFBLOCK_LOAD] = "refblock_load",
[BLKDBG_REFBLOCK_UPDATE] = "refblock_update",
[BLKDBG_REFBLOCK_UPDATE_PART] = "refblock_update_part",
[BLKDBG_REFBLOCK_ALLOC] = "refblock_alloc",
[BLKDBG_REFBLOCK_ALLOC_HOOKUP] = "refblock_alloc.hookup",
[BLKDBG_REFBLOCK_ALLOC_WRITE] = "refblock_alloc.write",
[BLKDBG_REFBLOCK_ALLOC_WRITE_BLOCKS] = "refblock_alloc.write_blocks",
[BLKDBG_REFBLOCK_ALLOC_WRITE_TABLE] = "refblock_alloc.write_table",
[BLKDBG_REFBLOCK_ALLOC_SWITCH_TABLE] = "refblock_alloc.switch_table",
[BLKDBG_CLUSTER_ALLOC] = "cluster_alloc",
[BLKDBG_CLUSTER_ALLOC_BYTES] = "cluster_alloc_bytes",
[BLKDBG_CLUSTER_FREE] = "cluster_free",
};
static int get_event_by_name(const char *name, BlkDebugEvent *event)
{
int i;
for (i = 0; i < BLKDBG_EVENT_MAX; i++) {
if (!strcmp(event_names[i], name)) {
*event = i;
return 0;
}
}
return -1;
}
struct add_rule_data {
BDRVBlkdebugState *s;
int action;
};
static int add_rule(QemuOpts *opts, void *opaque)
{
struct add_rule_data *d = opaque;
BDRVBlkdebugState *s = d->s;
const char* event_name;
BlkDebugEvent event;
struct BlkdebugRule *rule;
/* Find the right event for the rule */
event_name = qemu_opt_get(opts, "event");
if (!event_name || get_event_by_name(event_name, &event) < 0) {
return -1;
}
/* Set attributes common for all actions */
rule = qemu_mallocz(sizeof(*rule));
*rule = (struct BlkdebugRule) {
.event = event,
.action = d->action,
.state = qemu_opt_get_number(opts, "state", 0),
};
/* Parse action-specific options */
switch (d->action) {
case ACTION_INJECT_ERROR:
rule->options.inject.error = qemu_opt_get_number(opts, "errno", EIO);
rule->options.inject.once = qemu_opt_get_bool(opts, "once", 0);
rule->options.inject.immediately =
qemu_opt_get_bool(opts, "immediately", 0);
break;
case ACTION_SET_STATE:
rule->options.set_state.new_state =
qemu_opt_get_number(opts, "new_state", 0);
break;
};
/* Add the rule */
QLIST_INSERT_HEAD(&s->rules[event], rule, next);
return 0;
}
static int read_config(BDRVBlkdebugState *s, const char *filename)
{
FILE *f;
int ret;
struct add_rule_data d;
f = fopen(filename, "r");
if (f == NULL) {
return -errno;
}
ret = qemu_config_parse(f, config_groups, filename);
if (ret < 0) {
goto fail;
}
d.s = s;
d.action = ACTION_INJECT_ERROR;
qemu_opts_foreach(&inject_error_opts, add_rule, &d, 0);
d.action = ACTION_SET_STATE;
qemu_opts_foreach(&set_state_opts, add_rule, &d, 0);
ret = 0;
fail:
qemu_opts_reset(&inject_error_opts);
qemu_opts_reset(&set_state_opts);
fclose(f);
return ret;
}
/* Valid blkdebug filenames look like blkdebug:path/to/config:path/to/image */
static int blkdebug_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVBlkdebugState *s = bs->opaque;
int ret;
char *config, *c;
/* Parse the blkdebug: prefix */
if (strncmp(filename, "blkdebug:", strlen("blkdebug:"))) {
return -EINVAL;
}
filename += strlen("blkdebug:");
/* Read rules from config file */
c = strchr(filename, ':');
if (c == NULL) {
return -EINVAL;
}
config = strdup(filename);
config[c - filename] = '\0';
ret = read_config(s, config);
free(config);
if (ret < 0) {
return ret;
}
filename = c + 1;
/* Set initial state */
s->vars.state = 1;
/* Open the backing file */
ret = bdrv_file_open(&bs->file, filename, flags);
if (ret < 0) {
return ret;
}
return 0;
}
static void error_callback_bh(void *opaque)
{
struct BlkdebugAIOCB *acb = opaque;
qemu_bh_delete(acb->bh);
acb->common.cb(acb->common.opaque, acb->ret);
qemu_aio_release(acb);
}
static void blkdebug_aio_cancel(BlockDriverAIOCB *blockacb)
{
BlkdebugAIOCB *acb = container_of(blockacb, BlkdebugAIOCB, common);
qemu_aio_release(acb);
}
static BlockDriverAIOCB *inject_error(BlockDriverState *bs,
BlockDriverCompletionFunc *cb, void *opaque)
{
BDRVBlkdebugState *s = bs->opaque;
int error = s->vars.inject_errno;
struct BlkdebugAIOCB *acb;
QEMUBH *bh;
if (s->vars.inject_once) {
s->vars.inject_errno = 0;
}
if (s->vars.inject_immediately) {
return NULL;
}
acb = qemu_aio_get(&blkdebug_aio_pool, bs, cb, opaque);
acb->ret = -error;
bh = qemu_bh_new(error_callback_bh, acb);
acb->bh = bh;
qemu_bh_schedule(bh);
return &acb->common;
}
static BlockDriverAIOCB *blkdebug_aio_readv(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
BDRVBlkdebugState *s = bs->opaque;
if (s->vars.inject_errno) {
return inject_error(bs, cb, opaque);
}
BlockDriverAIOCB *acb =
bdrv_aio_readv(bs->file, sector_num, qiov, nb_sectors, cb, opaque);
return acb;
}
static BlockDriverAIOCB *blkdebug_aio_writev(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
BDRVBlkdebugState *s = bs->opaque;
if (s->vars.inject_errno) {
return inject_error(bs, cb, opaque);
}
BlockDriverAIOCB *acb =
bdrv_aio_writev(bs->file, sector_num, qiov, nb_sectors, cb, opaque);
return acb;
}
static void blkdebug_close(BlockDriverState *bs)
{
BDRVBlkdebugState *s = bs->opaque;
BlkdebugRule *rule, *next;
int i;
for (i = 0; i < BLKDBG_EVENT_MAX; i++) {
QLIST_FOREACH_SAFE(rule, &s->rules[i], next, next) {
QLIST_REMOVE(rule, next);
qemu_free(rule);
}
}
}
static int blkdebug_flush(BlockDriverState *bs)
{
return bdrv_flush(bs->file);
}
static BlockDriverAIOCB *blkdebug_aio_flush(BlockDriverState *bs,
BlockDriverCompletionFunc *cb, void *opaque)
{
return bdrv_aio_flush(bs->file, cb, opaque);
}
static void process_rule(BlockDriverState *bs, struct BlkdebugRule *rule,
BlkdebugVars *old_vars)
{
BDRVBlkdebugState *s = bs->opaque;
BlkdebugVars *vars = &s->vars;
/* Only process rules for the current state */
if (rule->state && rule->state != old_vars->state) {
return;
}
/* Take the action */
switch (rule->action) {
case ACTION_INJECT_ERROR:
vars->inject_errno = rule->options.inject.error;
vars->inject_once = rule->options.inject.once;
vars->inject_immediately = rule->options.inject.immediately;
break;
case ACTION_SET_STATE:
vars->state = rule->options.set_state.new_state;
break;
}
}
static void blkdebug_debug_event(BlockDriverState *bs, BlkDebugEvent event)
{
BDRVBlkdebugState *s = bs->opaque;
struct BlkdebugRule *rule;
BlkdebugVars old_vars = s->vars;
assert((int)event >= 0 && event < BLKDBG_EVENT_MAX);
QLIST_FOREACH(rule, &s->rules[event], next) {
process_rule(bs, rule, &old_vars);
}
}
static BlockDriver bdrv_blkdebug = {
.format_name = "blkdebug",
.protocol_name = "blkdebug",
.instance_size = sizeof(BDRVBlkdebugState),
.bdrv_file_open = blkdebug_open,
.bdrv_close = blkdebug_close,
.bdrv_flush = blkdebug_flush,
.bdrv_aio_readv = blkdebug_aio_readv,
.bdrv_aio_writev = blkdebug_aio_writev,
.bdrv_aio_flush = blkdebug_aio_flush,
.bdrv_debug_event = blkdebug_debug_event,
};
static void bdrv_blkdebug_init(void)
{
bdrv_register(&bdrv_blkdebug);
}
block_init(bdrv_blkdebug_init);

View File

@@ -1,383 +0,0 @@
/*
* Block protocol for block driver correctness testing
*
* Copyright (C) 2010 IBM, Corp.
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include <stdarg.h>
#include "qemu_socket.h" /* for EINPROGRESS on Windows */
#include "block_int.h"
typedef struct {
BlockDriverState *test_file;
} BDRVBlkverifyState;
typedef struct BlkverifyAIOCB BlkverifyAIOCB;
struct BlkverifyAIOCB {
BlockDriverAIOCB common;
QEMUBH *bh;
/* Request metadata */
bool is_write;
int64_t sector_num;
int nb_sectors;
int ret; /* first completed request's result */
unsigned int done; /* completion counter */
bool *finished; /* completion signal for cancel */
QEMUIOVector *qiov; /* user I/O vector */
QEMUIOVector raw_qiov; /* cloned I/O vector for raw file */
void *buf; /* buffer for raw file I/O */
void (*verify)(BlkverifyAIOCB *acb);
};
static void blkverify_aio_cancel(BlockDriverAIOCB *blockacb)
{
BlkverifyAIOCB *acb = (BlkverifyAIOCB *)blockacb;
bool finished = false;
/* Wait until request completes, invokes its callback, and frees itself */
acb->finished = &finished;
while (!finished) {
qemu_aio_wait();
}
}
static AIOPool blkverify_aio_pool = {
.aiocb_size = sizeof(BlkverifyAIOCB),
.cancel = blkverify_aio_cancel,
};
static void GCC_FMT_ATTR(2, 3) blkverify_err(BlkverifyAIOCB *acb,
const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
fprintf(stderr, "blkverify: %s sector_num=%" PRId64 " nb_sectors=%d ",
acb->is_write ? "write" : "read", acb->sector_num,
acb->nb_sectors);
vfprintf(stderr, fmt, ap);
fprintf(stderr, "\n");
va_end(ap);
exit(1);
}
/* Valid blkverify filenames look like blkverify:path/to/raw_image:path/to/image */
static int blkverify_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVBlkverifyState *s = bs->opaque;
int ret;
char *raw, *c;
/* Parse the blkverify: prefix */
if (strncmp(filename, "blkverify:", strlen("blkverify:"))) {
return -EINVAL;
}
filename += strlen("blkverify:");
/* Parse the raw image filename */
c = strchr(filename, ':');
if (c == NULL) {
return -EINVAL;
}
raw = strdup(filename);
raw[c - filename] = '\0';
ret = bdrv_file_open(&bs->file, raw, flags);
free(raw);
if (ret < 0) {
return ret;
}
filename = c + 1;
/* Open the test file */
s->test_file = bdrv_new("");
ret = bdrv_open(s->test_file, filename, flags, NULL);
if (ret < 0) {
bdrv_delete(s->test_file);
s->test_file = NULL;
return ret;
}
return 0;
}
static void blkverify_close(BlockDriverState *bs)
{
BDRVBlkverifyState *s = bs->opaque;
bdrv_delete(s->test_file);
s->test_file = NULL;
}
static int blkverify_flush(BlockDriverState *bs)
{
BDRVBlkverifyState *s = bs->opaque;
/* Only flush test file, the raw file is not important */
return bdrv_flush(s->test_file);
}
static int64_t blkverify_getlength(BlockDriverState *bs)
{
BDRVBlkverifyState *s = bs->opaque;
return bdrv_getlength(s->test_file);
}
/**
* Check that I/O vector contents are identical
*
* @a: I/O vector
* @b: I/O vector
* @ret: Offset to first mismatching byte or -1 if match
*/
static ssize_t blkverify_iovec_compare(QEMUIOVector *a, QEMUIOVector *b)
{
int i;
ssize_t offset = 0;
assert(a->niov == b->niov);
for (i = 0; i < a->niov; i++) {
size_t len = 0;
uint8_t *p = (uint8_t *)a->iov[i].iov_base;
uint8_t *q = (uint8_t *)b->iov[i].iov_base;
assert(a->iov[i].iov_len == b->iov[i].iov_len);
while (len < a->iov[i].iov_len && *p++ == *q++) {
len++;
}
offset += len;
if (len != a->iov[i].iov_len) {
return offset;
}
}
return -1;
}
typedef struct {
int src_index;
struct iovec *src_iov;
void *dest_base;
} IOVectorSortElem;
static int sortelem_cmp_src_base(const void *a, const void *b)
{
const IOVectorSortElem *elem_a = a;
const IOVectorSortElem *elem_b = b;
/* Don't overflow */
if (elem_a->src_iov->iov_base < elem_b->src_iov->iov_base) {
return -1;
} else if (elem_a->src_iov->iov_base > elem_b->src_iov->iov_base) {
return 1;
} else {
return 0;
}
}
static int sortelem_cmp_src_index(const void *a, const void *b)
{
const IOVectorSortElem *elem_a = a;
const IOVectorSortElem *elem_b = b;
return elem_a->src_index - elem_b->src_index;
}
/**
* Copy contents of I/O vector
*
* The relative relationships of overlapping iovecs are preserved. This is
* necessary to ensure identical semantics in the cloned I/O vector.
*/
static void blkverify_iovec_clone(QEMUIOVector *dest, const QEMUIOVector *src,
void *buf)
{
IOVectorSortElem sortelems[src->niov];
void *last_end;
int i;
/* Sort by source iovecs by base address */
for (i = 0; i < src->niov; i++) {
sortelems[i].src_index = i;
sortelems[i].src_iov = &src->iov[i];
}
qsort(sortelems, src->niov, sizeof(sortelems[0]), sortelem_cmp_src_base);
/* Allocate buffer space taking into account overlapping iovecs */
last_end = NULL;
for (i = 0; i < src->niov; i++) {
struct iovec *cur = sortelems[i].src_iov;
ptrdiff_t rewind = 0;
/* Detect overlap */
if (last_end && last_end > cur->iov_base) {
rewind = last_end - cur->iov_base;
}
sortelems[i].dest_base = buf - rewind;
buf += cur->iov_len - MIN(rewind, cur->iov_len);
last_end = MAX(cur->iov_base + cur->iov_len, last_end);
}
/* Sort by source iovec index and build destination iovec */
qsort(sortelems, src->niov, sizeof(sortelems[0]), sortelem_cmp_src_index);
for (i = 0; i < src->niov; i++) {
qemu_iovec_add(dest, sortelems[i].dest_base, src->iov[i].iov_len);
}
}
static BlkverifyAIOCB *blkverify_aio_get(BlockDriverState *bs, bool is_write,
int64_t sector_num, QEMUIOVector *qiov,
int nb_sectors,
BlockDriverCompletionFunc *cb,
void *opaque)
{
BlkverifyAIOCB *acb = qemu_aio_get(&blkverify_aio_pool, bs, cb, opaque);
acb->bh = NULL;
acb->is_write = is_write;
acb->sector_num = sector_num;
acb->nb_sectors = nb_sectors;
acb->ret = -EINPROGRESS;
acb->done = 0;
acb->qiov = qiov;
acb->buf = NULL;
acb->verify = NULL;
acb->finished = NULL;
return acb;
}
static void blkverify_aio_bh(void *opaque)
{
BlkverifyAIOCB *acb = opaque;
qemu_bh_delete(acb->bh);
if (acb->buf) {
qemu_iovec_destroy(&acb->raw_qiov);
qemu_vfree(acb->buf);
}
acb->common.cb(acb->common.opaque, acb->ret);
if (acb->finished) {
*acb->finished = true;
}
qemu_aio_release(acb);
}
static void blkverify_aio_cb(void *opaque, int ret)
{
BlkverifyAIOCB *acb = opaque;
switch (++acb->done) {
case 1:
acb->ret = ret;
break;
case 2:
if (acb->ret != ret) {
blkverify_err(acb, "return value mismatch %d != %d", acb->ret, ret);
}
if (acb->verify) {
acb->verify(acb);
}
acb->bh = qemu_bh_new(blkverify_aio_bh, acb);
qemu_bh_schedule(acb->bh);
break;
}
}
static void blkverify_verify_readv(BlkverifyAIOCB *acb)
{
ssize_t offset = blkverify_iovec_compare(acb->qiov, &acb->raw_qiov);
if (offset != -1) {
blkverify_err(acb, "contents mismatch in sector %" PRId64,
acb->sector_num + (int64_t)(offset / BDRV_SECTOR_SIZE));
}
}
static BlockDriverAIOCB *blkverify_aio_readv(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
BDRVBlkverifyState *s = bs->opaque;
BlkverifyAIOCB *acb = blkverify_aio_get(bs, false, sector_num, qiov,
nb_sectors, cb, opaque);
acb->verify = blkverify_verify_readv;
acb->buf = qemu_blockalign(bs->file, qiov->size);
qemu_iovec_init(&acb->raw_qiov, acb->qiov->niov);
blkverify_iovec_clone(&acb->raw_qiov, qiov, acb->buf);
if (!bdrv_aio_readv(s->test_file, sector_num, qiov, nb_sectors,
blkverify_aio_cb, acb)) {
blkverify_aio_cb(acb, -EIO);
}
if (!bdrv_aio_readv(bs->file, sector_num, &acb->raw_qiov, nb_sectors,
blkverify_aio_cb, acb)) {
blkverify_aio_cb(acb, -EIO);
}
return &acb->common;
}
static BlockDriverAIOCB *blkverify_aio_writev(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
BDRVBlkverifyState *s = bs->opaque;
BlkverifyAIOCB *acb = blkverify_aio_get(bs, true, sector_num, qiov,
nb_sectors, cb, opaque);
if (!bdrv_aio_writev(s->test_file, sector_num, qiov, nb_sectors,
blkverify_aio_cb, acb)) {
blkverify_aio_cb(acb, -EIO);
}
if (!bdrv_aio_writev(bs->file, sector_num, qiov, nb_sectors,
blkverify_aio_cb, acb)) {
blkverify_aio_cb(acb, -EIO);
}
return &acb->common;
}
static BlockDriverAIOCB *blkverify_aio_flush(BlockDriverState *bs,
BlockDriverCompletionFunc *cb,
void *opaque)
{
BDRVBlkverifyState *s = bs->opaque;
/* Only flush test file, the raw file is not important */
return bdrv_aio_flush(s->test_file, cb, opaque);
}
static BlockDriver bdrv_blkverify = {
.format_name = "blkverify",
.protocol_name = "blkverify",
.instance_size = sizeof(BDRVBlkverifyState),
.bdrv_getlength = blkverify_getlength,
.bdrv_file_open = blkverify_open,
.bdrv_close = blkverify_close,
.bdrv_flush = blkverify_flush,
.bdrv_aio_readv = blkverify_aio_readv,
.bdrv_aio_writev = blkverify_aio_writev,
.bdrv_aio_flush = blkverify_aio_flush,
};
static void bdrv_blkverify_init(void)
{
bdrv_register(&bdrv_blkverify);
}
block_init(bdrv_blkverify_init);

View File

@@ -1,564 +0,0 @@
/*
* QEMU Block driver for CURL images
*
* Copyright (c) 2009 Alexander Graf <agraf@suse.de>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu-common.h"
#include "block_int.h"
#include <curl/curl.h>
// #define DEBUG
// #define DEBUG_VERBOSE
#ifdef DEBUG_CURL
#define DPRINTF(fmt, ...) do { printf(fmt, ## __VA_ARGS__); } while (0)
#else
#define DPRINTF(fmt, ...) do { } while (0)
#endif
#define CURL_NUM_STATES 8
#define CURL_NUM_ACB 8
#define SECTOR_SIZE 512
#define READ_AHEAD_SIZE (256 * 1024)
#define FIND_RET_NONE 0
#define FIND_RET_OK 1
#define FIND_RET_WAIT 2
struct BDRVCURLState;
typedef struct CURLAIOCB {
BlockDriverAIOCB common;
QEMUIOVector *qiov;
size_t start;
size_t end;
} CURLAIOCB;
typedef struct CURLState
{
struct BDRVCURLState *s;
CURLAIOCB *acb[CURL_NUM_ACB];
CURL *curl;
char *orig_buf;
size_t buf_start;
size_t buf_off;
size_t buf_len;
char range[128];
char errmsg[CURL_ERROR_SIZE];
char in_use;
} CURLState;
typedef struct BDRVCURLState {
CURLM *multi;
size_t len;
CURLState states[CURL_NUM_STATES];
char *url;
size_t readahead_size;
} BDRVCURLState;
static void curl_clean_state(CURLState *s);
static void curl_multi_do(void *arg);
static int curl_sock_cb(CURL *curl, curl_socket_t fd, int action,
void *s, void *sp)
{
DPRINTF("CURL (AIO): Sock action %d on fd %d\n", action, fd);
switch (action) {
case CURL_POLL_IN:
qemu_aio_set_fd_handler(fd, curl_multi_do, NULL, NULL, NULL, s);
break;
case CURL_POLL_OUT:
qemu_aio_set_fd_handler(fd, NULL, curl_multi_do, NULL, NULL, s);
break;
case CURL_POLL_INOUT:
qemu_aio_set_fd_handler(fd, curl_multi_do,
curl_multi_do, NULL, NULL, s);
break;
case CURL_POLL_REMOVE:
qemu_aio_set_fd_handler(fd, NULL, NULL, NULL, NULL, NULL);
break;
}
return 0;
}
static size_t curl_size_cb(void *ptr, size_t size, size_t nmemb, void *opaque)
{
CURLState *s = ((CURLState*)opaque);
size_t realsize = size * nmemb;
size_t fsize;
if(sscanf(ptr, "Content-Length: %zd", &fsize) == 1) {
s->s->len = fsize;
}
return realsize;
}
static size_t curl_read_cb(void *ptr, size_t size, size_t nmemb, void *opaque)
{
CURLState *s = ((CURLState*)opaque);
size_t realsize = size * nmemb;
int i;
DPRINTF("CURL: Just reading %zd bytes\n", realsize);
if (!s || !s->orig_buf)
goto read_end;
memcpy(s->orig_buf + s->buf_off, ptr, realsize);
s->buf_off += realsize;
for(i=0; i<CURL_NUM_ACB; i++) {
CURLAIOCB *acb = s->acb[i];
if (!acb)
continue;
if ((s->buf_off >= acb->end)) {
qemu_iovec_from_buffer(acb->qiov, s->orig_buf + acb->start,
acb->end - acb->start);
acb->common.cb(acb->common.opaque, 0);
qemu_aio_release(acb);
s->acb[i] = NULL;
}
}
read_end:
return realsize;
}
static int curl_find_buf(BDRVCURLState *s, size_t start, size_t len,
CURLAIOCB *acb)
{
int i;
size_t end = start + len;
for (i=0; i<CURL_NUM_STATES; i++) {
CURLState *state = &s->states[i];
size_t buf_end = (state->buf_start + state->buf_off);
size_t buf_fend = (state->buf_start + state->buf_len);
if (!state->orig_buf)
continue;
if (!state->buf_off)
continue;
// Does the existing buffer cover our section?
if ((start >= state->buf_start) &&
(start <= buf_end) &&
(end >= state->buf_start) &&
(end <= buf_end))
{
char *buf = state->orig_buf + (start - state->buf_start);
qemu_iovec_from_buffer(acb->qiov, buf, len);
acb->common.cb(acb->common.opaque, 0);
return FIND_RET_OK;
}
// Wait for unfinished chunks
if ((start >= state->buf_start) &&
(start <= buf_fend) &&
(end >= state->buf_start) &&
(end <= buf_fend))
{
int j;
acb->start = start - state->buf_start;
acb->end = acb->start + len;
for (j=0; j<CURL_NUM_ACB; j++) {
if (!state->acb[j]) {
state->acb[j] = acb;
return FIND_RET_WAIT;
}
}
}
}
return FIND_RET_NONE;
}
static void curl_multi_do(void *arg)
{
BDRVCURLState *s = (BDRVCURLState *)arg;
int running;
int r;
int msgs_in_queue;
if (!s->multi)
return;
do {
r = curl_multi_socket_all(s->multi, &running);
} while(r == CURLM_CALL_MULTI_PERFORM);
/* Try to find done transfers, so we can free the easy
* handle again. */
do {
CURLMsg *msg;
msg = curl_multi_info_read(s->multi, &msgs_in_queue);
if (!msg)
break;
if (msg->msg == CURLMSG_NONE)
break;
switch (msg->msg) {
case CURLMSG_DONE:
{
CURLState *state = NULL;
curl_easy_getinfo(msg->easy_handle, CURLINFO_PRIVATE, (char**)&state);
curl_clean_state(state);
break;
}
default:
msgs_in_queue = 0;
break;
}
} while(msgs_in_queue);
}
static CURLState *curl_init_state(BDRVCURLState *s)
{
CURLState *state = NULL;
int i, j;
do {
for (i=0; i<CURL_NUM_STATES; i++) {
for (j=0; j<CURL_NUM_ACB; j++)
if (s->states[i].acb[j])
continue;
if (s->states[i].in_use)
continue;
state = &s->states[i];
state->in_use = 1;
break;
}
if (!state) {
usleep(100);
curl_multi_do(s);
}
} while(!state);
if (state->curl)
goto has_curl;
state->curl = curl_easy_init();
if (!state->curl)
return NULL;
curl_easy_setopt(state->curl, CURLOPT_URL, s->url);
curl_easy_setopt(state->curl, CURLOPT_TIMEOUT, 5);
curl_easy_setopt(state->curl, CURLOPT_WRITEFUNCTION, (void *)curl_read_cb);
curl_easy_setopt(state->curl, CURLOPT_WRITEDATA, (void *)state);
curl_easy_setopt(state->curl, CURLOPT_PRIVATE, (void *)state);
curl_easy_setopt(state->curl, CURLOPT_AUTOREFERER, 1);
curl_easy_setopt(state->curl, CURLOPT_FOLLOWLOCATION, 1);
curl_easy_setopt(state->curl, CURLOPT_NOSIGNAL, 1);
curl_easy_setopt(state->curl, CURLOPT_ERRORBUFFER, state->errmsg);
#ifdef DEBUG_VERBOSE
curl_easy_setopt(state->curl, CURLOPT_VERBOSE, 1);
#endif
has_curl:
state->s = s;
return state;
}
static void curl_clean_state(CURLState *s)
{
if (s->s->multi)
curl_multi_remove_handle(s->s->multi, s->curl);
s->in_use = 0;
}
static int curl_open(BlockDriverState *bs, const char *filename, int flags)
{
BDRVCURLState *s = bs->opaque;
CURLState *state = NULL;
double d;
#define RA_OPTSTR ":readahead="
char *file;
char *ra;
const char *ra_val;
int parse_state = 0;
static int inited = 0;
file = qemu_strdup(filename);
s->readahead_size = READ_AHEAD_SIZE;
/* Parse a trailing ":readahead=#:" param, if present. */
ra = file + strlen(file) - 1;
while (ra >= file) {
if (parse_state == 0) {
if (*ra == ':')
parse_state++;
else
break;
} else if (parse_state == 1) {
if (*ra > '9' || *ra < '0') {
char *opt_start = ra - strlen(RA_OPTSTR) + 1;
if (opt_start > file &&
strncmp(opt_start, RA_OPTSTR, strlen(RA_OPTSTR)) == 0) {
ra_val = ra + 1;
ra -= strlen(RA_OPTSTR) - 1;
*ra = '\0';
s->readahead_size = atoi(ra_val);
break;
} else {
break;
}
}
}
ra--;
}
if ((s->readahead_size & 0x1ff) != 0) {
fprintf(stderr, "HTTP_READAHEAD_SIZE %zd is not a multiple of 512\n",
s->readahead_size);
goto out_noclean;
}
if (!inited) {
curl_global_init(CURL_GLOBAL_ALL);
inited = 1;
}
DPRINTF("CURL: Opening %s\n", file);
s->url = file;
state = curl_init_state(s);
if (!state)
goto out_noclean;
// Get file size
curl_easy_setopt(state->curl, CURLOPT_NOBODY, 1);
curl_easy_setopt(state->curl, CURLOPT_WRITEFUNCTION, (void *)curl_size_cb);
if (curl_easy_perform(state->curl))
goto out;
curl_easy_getinfo(state->curl, CURLINFO_CONTENT_LENGTH_DOWNLOAD, &d);
curl_easy_setopt(state->curl, CURLOPT_WRITEFUNCTION, (void *)curl_read_cb);
curl_easy_setopt(state->curl, CURLOPT_NOBODY, 0);
if (d)
s->len = (size_t)d;
else if(!s->len)
goto out;
DPRINTF("CURL: Size = %zd\n", s->len);
curl_clean_state(state);
curl_easy_cleanup(state->curl);
state->curl = NULL;
// Now we know the file exists and its size, so let's
// initialize the multi interface!
s->multi = curl_multi_init();
curl_multi_setopt( s->multi, CURLMOPT_SOCKETDATA, s);
curl_multi_setopt( s->multi, CURLMOPT_SOCKETFUNCTION, curl_sock_cb );
curl_multi_do(s);
return 0;
out:
fprintf(stderr, "CURL: Error opening file: %s\n", state->errmsg);
curl_easy_cleanup(state->curl);
state->curl = NULL;
out_noclean:
qemu_free(file);
return -EINVAL;
}
static void curl_aio_cancel(BlockDriverAIOCB *blockacb)
{
// Do we have to implement canceling? Seems to work without...
}
static AIOPool curl_aio_pool = {
.aiocb_size = sizeof(CURLAIOCB),
.cancel = curl_aio_cancel,
};
static BlockDriverAIOCB *curl_aio_readv(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
BDRVCURLState *s = bs->opaque;
CURLAIOCB *acb;
size_t start = sector_num * SECTOR_SIZE;
size_t end;
CURLState *state;
acb = qemu_aio_get(&curl_aio_pool, bs, cb, opaque);
if (!acb)
return NULL;
acb->qiov = qiov;
// In case we have the requested data already (e.g. read-ahead),
// we can just call the callback and be done.
switch (curl_find_buf(s, start, nb_sectors * SECTOR_SIZE, acb)) {
case FIND_RET_OK:
qemu_aio_release(acb);
// fall through
case FIND_RET_WAIT:
return &acb->common;
default:
break;
}
// No cache found, so let's start a new request
state = curl_init_state(s);
if (!state)
return NULL;
acb->start = 0;
acb->end = (nb_sectors * SECTOR_SIZE);
state->buf_off = 0;
if (state->orig_buf)
qemu_free(state->orig_buf);
state->buf_start = start;
state->buf_len = acb->end + s->readahead_size;
end = MIN(start + state->buf_len, s->len) - 1;
state->orig_buf = qemu_malloc(state->buf_len);
state->acb[0] = acb;
snprintf(state->range, 127, "%zd-%zd", start, end);
DPRINTF("CURL (AIO): Reading %d at %zd (%s)\n",
(nb_sectors * SECTOR_SIZE), start, state->range);
curl_easy_setopt(state->curl, CURLOPT_RANGE, state->range);
curl_multi_add_handle(s->multi, state->curl);
curl_multi_do(s);
return &acb->common;
}
static void curl_close(BlockDriverState *bs)
{
BDRVCURLState *s = bs->opaque;
int i;
DPRINTF("CURL: Close\n");
for (i=0; i<CURL_NUM_STATES; i++) {
if (s->states[i].in_use)
curl_clean_state(&s->states[i]);
if (s->states[i].curl) {
curl_easy_cleanup(s->states[i].curl);
s->states[i].curl = NULL;
}
if (s->states[i].orig_buf) {
qemu_free(s->states[i].orig_buf);
s->states[i].orig_buf = NULL;
}
}
if (s->multi)
curl_multi_cleanup(s->multi);
if (s->url)
free(s->url);
}
static int64_t curl_getlength(BlockDriverState *bs)
{
BDRVCURLState *s = bs->opaque;
return s->len;
}
static BlockDriver bdrv_http = {
.format_name = "http",
.protocol_name = "http",
.instance_size = sizeof(BDRVCURLState),
.bdrv_file_open = curl_open,
.bdrv_close = curl_close,
.bdrv_getlength = curl_getlength,
.bdrv_aio_readv = curl_aio_readv,
};
static BlockDriver bdrv_https = {
.format_name = "https",
.protocol_name = "https",
.instance_size = sizeof(BDRVCURLState),
.bdrv_file_open = curl_open,
.bdrv_close = curl_close,
.bdrv_getlength = curl_getlength,
.bdrv_aio_readv = curl_aio_readv,
};
static BlockDriver bdrv_ftp = {
.format_name = "ftp",
.protocol_name = "ftp",
.instance_size = sizeof(BDRVCURLState),
.bdrv_file_open = curl_open,
.bdrv_close = curl_close,
.bdrv_getlength = curl_getlength,
.bdrv_aio_readv = curl_aio_readv,
};
static BlockDriver bdrv_ftps = {
.format_name = "ftps",
.protocol_name = "ftps",
.instance_size = sizeof(BDRVCURLState),
.bdrv_file_open = curl_open,
.bdrv_close = curl_close,
.bdrv_getlength = curl_getlength,
.bdrv_aio_readv = curl_aio_readv,
};
static BlockDriver bdrv_tftp = {
.format_name = "tftp",
.protocol_name = "tftp",
.instance_size = sizeof(BDRVCURLState),
.bdrv_file_open = curl_open,
.bdrv_close = curl_close,
.bdrv_getlength = curl_getlength,
.bdrv_aio_readv = curl_aio_readv,
};
static void curl_block_init(void)
{
bdrv_register(&bdrv_http);
bdrv_register(&bdrv_https);
bdrv_register(&bdrv_ftp);
bdrv_register(&bdrv_ftps);
bdrv_register(&bdrv_tftp);
}
block_init(curl_block_init);

View File

@@ -1,314 +0,0 @@
/*
* L2/refcount table cache for the QCOW2 format
*
* Copyright (c) 2010 Kevin Wolf <kwolf@redhat.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "block_int.h"
#include "qemu-common.h"
#include "qcow2.h"
typedef struct Qcow2CachedTable {
void* table;
int64_t offset;
bool dirty;
int cache_hits;
int ref;
} Qcow2CachedTable;
struct Qcow2Cache {
Qcow2CachedTable* entries;
struct Qcow2Cache* depends;
int size;
bool depends_on_flush;
bool writethrough;
};
Qcow2Cache *qcow2_cache_create(BlockDriverState *bs, int num_tables,
bool writethrough)
{
BDRVQcowState *s = bs->opaque;
Qcow2Cache *c;
int i;
c = qemu_mallocz(sizeof(*c));
c->size = num_tables;
c->entries = qemu_mallocz(sizeof(*c->entries) * num_tables);
c->writethrough = writethrough;
for (i = 0; i < c->size; i++) {
c->entries[i].table = qemu_blockalign(bs, s->cluster_size);
}
return c;
}
int qcow2_cache_destroy(BlockDriverState* bs, Qcow2Cache *c)
{
int i;
for (i = 0; i < c->size; i++) {
assert(c->entries[i].ref == 0);
qemu_vfree(c->entries[i].table);
}
qemu_free(c->entries);
qemu_free(c);
return 0;
}
static int qcow2_cache_flush_dependency(BlockDriverState *bs, Qcow2Cache *c)
{
int ret;
ret = qcow2_cache_flush(bs, c->depends);
if (ret < 0) {
return ret;
}
c->depends = NULL;
c->depends_on_flush = false;
return 0;
}
static int qcow2_cache_entry_flush(BlockDriverState *bs, Qcow2Cache *c, int i)
{
BDRVQcowState *s = bs->opaque;
int ret = 0;
if (!c->entries[i].dirty || !c->entries[i].offset) {
return 0;
}
if (c->depends) {
ret = qcow2_cache_flush_dependency(bs, c);
} else if (c->depends_on_flush) {
ret = bdrv_flush(bs->file);
if (ret >= 0) {
c->depends_on_flush = false;
}
}
if (ret < 0) {
return ret;
}
if (c == s->refcount_block_cache) {
BLKDBG_EVENT(bs->file, BLKDBG_REFBLOCK_UPDATE_PART);
} else if (c == s->l2_table_cache) {
BLKDBG_EVENT(bs->file, BLKDBG_L2_UPDATE);
}
ret = bdrv_pwrite(bs->file, c->entries[i].offset, c->entries[i].table,
s->cluster_size);
if (ret < 0) {
return ret;
}
c->entries[i].dirty = false;
return 0;
}
int qcow2_cache_flush(BlockDriverState *bs, Qcow2Cache *c)
{
int result = 0;
int ret;
int i;
for (i = 0; i < c->size; i++) {
ret = qcow2_cache_entry_flush(bs, c, i);
if (ret < 0 && result != -ENOSPC) {
result = ret;
}
}
if (result == 0) {
ret = bdrv_flush(bs->file);
if (ret < 0) {
result = ret;
}
}
return result;
}
int qcow2_cache_set_dependency(BlockDriverState *bs, Qcow2Cache *c,
Qcow2Cache *dependency)
{
int ret;
if (dependency->depends) {
ret = qcow2_cache_flush_dependency(bs, dependency);
if (ret < 0) {
return ret;
}
}
if (c->depends && (c->depends != dependency)) {
ret = qcow2_cache_flush_dependency(bs, c);
if (ret < 0) {
return ret;
}
}
c->depends = dependency;
return 0;
}
void qcow2_cache_depends_on_flush(Qcow2Cache *c)
{
c->depends_on_flush = true;
}
static int qcow2_cache_find_entry_to_replace(Qcow2Cache *c)
{
int i;
int min_count = INT_MAX;
int min_index = -1;
for (i = 0; i < c->size; i++) {
if (c->entries[i].ref) {
continue;
}
if (c->entries[i].cache_hits < min_count) {
min_index = i;
min_count = c->entries[i].cache_hits;
}
/* Give newer hits priority */
/* TODO Check how to optimize the replacement strategy */
c->entries[i].cache_hits /= 2;
}
if (min_index == -1) {
/* This can't happen in current synchronous code, but leave the check
* here as a reminder for whoever starts using AIO with the cache */
abort();
}
return min_index;
}
static int qcow2_cache_do_get(BlockDriverState *bs, Qcow2Cache *c,
uint64_t offset, void **table, bool read_from_disk)
{
BDRVQcowState *s = bs->opaque;
int i;
int ret;
/* Check if the table is already cached */
for (i = 0; i < c->size; i++) {
if (c->entries[i].offset == offset) {
goto found;
}
}
/* If not, write a table back and replace it */
i = qcow2_cache_find_entry_to_replace(c);
if (i < 0) {
return i;
}
ret = qcow2_cache_entry_flush(bs, c, i);
if (ret < 0) {
return ret;
}
c->entries[i].offset = 0;
if (read_from_disk) {
if (c == s->l2_table_cache) {
BLKDBG_EVENT(bs->file, BLKDBG_L2_LOAD);
}
ret = bdrv_pread(bs->file, offset, c->entries[i].table, s->cluster_size);
if (ret < 0) {
return ret;
}
}
/* Give the table some hits for the start so that it won't be replaced
* immediately. The number 32 is completely arbitrary. */
c->entries[i].cache_hits = 32;
c->entries[i].offset = offset;
/* And return the right table */
found:
c->entries[i].cache_hits++;
c->entries[i].ref++;
*table = c->entries[i].table;
return 0;
}
int qcow2_cache_get(BlockDriverState *bs, Qcow2Cache *c, uint64_t offset,
void **table)
{
return qcow2_cache_do_get(bs, c, offset, table, true);
}
int qcow2_cache_get_empty(BlockDriverState *bs, Qcow2Cache *c, uint64_t offset,
void **table)
{
return qcow2_cache_do_get(bs, c, offset, table, false);
}
int qcow2_cache_put(BlockDriverState *bs, Qcow2Cache *c, void **table)
{
int i;
for (i = 0; i < c->size; i++) {
if (c->entries[i].table == *table) {
goto found;
}
}
return -ENOENT;
found:
c->entries[i].ref--;
*table = NULL;
assert(c->entries[i].ref >= 0);
if (c->writethrough) {
return qcow2_cache_entry_flush(bs, c, i);
} else {
return 0;
}
}
void qcow2_cache_entry_mark_dirty(Qcow2Cache *c, void *table)
{
int i;
for (i = 0; i < c->size; i++) {
if (c->entries[i].table == table) {
goto found;
}
}
abort();
found:
c->entries[i].dirty = true;
}

View File

@@ -1,975 +0,0 @@
/*
* Block driver for the QCOW version 2 format
*
* Copyright (c) 2004-2006 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <zlib.h>
#include "qemu-common.h"
#include "block_int.h"
#include "block/qcow2.h"
int qcow2_grow_l1_table(BlockDriverState *bs, int min_size, bool exact_size)
{
BDRVQcowState *s = bs->opaque;
int new_l1_size, new_l1_size2, ret, i;
uint64_t *new_l1_table;
int64_t new_l1_table_offset;
uint8_t data[12];
if (min_size <= s->l1_size)
return 0;
if (exact_size) {
new_l1_size = min_size;
} else {
/* Bump size up to reduce the number of times we have to grow */
new_l1_size = s->l1_size;
if (new_l1_size == 0) {
new_l1_size = 1;
}
while (min_size > new_l1_size) {
new_l1_size = (new_l1_size * 3 + 1) / 2;
}
}
#ifdef DEBUG_ALLOC2
printf("grow l1_table from %d to %d\n", s->l1_size, new_l1_size);
#endif
new_l1_size2 = sizeof(uint64_t) * new_l1_size;
new_l1_table = qemu_mallocz(align_offset(new_l1_size2, 512));
memcpy(new_l1_table, s->l1_table, s->l1_size * sizeof(uint64_t));
/* write new table (align to cluster) */
BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_ALLOC_TABLE);
new_l1_table_offset = qcow2_alloc_clusters(bs, new_l1_size2);
if (new_l1_table_offset < 0) {
qemu_free(new_l1_table);
return new_l1_table_offset;
}
ret = qcow2_cache_flush(bs, s->refcount_block_cache);
if (ret < 0) {
return ret;
}
BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_WRITE_TABLE);
for(i = 0; i < s->l1_size; i++)
new_l1_table[i] = cpu_to_be64(new_l1_table[i]);
ret = bdrv_pwrite_sync(bs->file, new_l1_table_offset, new_l1_table, new_l1_size2);
if (ret < 0)
goto fail;
for(i = 0; i < s->l1_size; i++)
new_l1_table[i] = be64_to_cpu(new_l1_table[i]);
/* set new table */
BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_ACTIVATE_TABLE);
cpu_to_be32w((uint32_t*)data, new_l1_size);
cpu_to_be64wu((uint64_t*)(data + 4), new_l1_table_offset);
ret = bdrv_pwrite_sync(bs->file, offsetof(QCowHeader, l1_size), data,sizeof(data));
if (ret < 0) {
goto fail;
}
qemu_free(s->l1_table);
qcow2_free_clusters(bs, s->l1_table_offset, s->l1_size * sizeof(uint64_t));
s->l1_table_offset = new_l1_table_offset;
s->l1_table = new_l1_table;
s->l1_size = new_l1_size;
return 0;
fail:
qemu_free(new_l1_table);
qcow2_free_clusters(bs, new_l1_table_offset, new_l1_size2);
return ret;
}
/*
* l2_load
*
* Loads a L2 table into memory. If the table is in the cache, the cache
* is used; otherwise the L2 table is loaded from the image file.
*
* Returns a pointer to the L2 table on success, or NULL if the read from
* the image file failed.
*/
static int l2_load(BlockDriverState *bs, uint64_t l2_offset,
uint64_t **l2_table)
{
BDRVQcowState *s = bs->opaque;
int ret;
ret = qcow2_cache_get(bs, s->l2_table_cache, l2_offset, (void**) l2_table);
return ret;
}
/*
* Writes one sector of the L1 table to the disk (can't update single entries
* and we really don't want bdrv_pread to perform a read-modify-write)
*/
#define L1_ENTRIES_PER_SECTOR (512 / 8)
static int write_l1_entry(BlockDriverState *bs, int l1_index)
{
BDRVQcowState *s = bs->opaque;
uint64_t buf[L1_ENTRIES_PER_SECTOR];
int l1_start_index;
int i, ret;
l1_start_index = l1_index & ~(L1_ENTRIES_PER_SECTOR - 1);
for (i = 0; i < L1_ENTRIES_PER_SECTOR; i++) {
buf[i] = cpu_to_be64(s->l1_table[l1_start_index + i]);
}
BLKDBG_EVENT(bs->file, BLKDBG_L1_UPDATE);
ret = bdrv_pwrite_sync(bs->file, s->l1_table_offset + 8 * l1_start_index,
buf, sizeof(buf));
if (ret < 0) {
return ret;
}
return 0;
}
/*
* l2_allocate
*
* Allocate a new l2 entry in the file. If l1_index points to an already
* used entry in the L2 table (i.e. we are doing a copy on write for the L2
* table) copy the contents of the old L2 table into the newly allocated one.
* Otherwise the new table is initialized with zeros.
*
*/
static int l2_allocate(BlockDriverState *bs, int l1_index, uint64_t **table)
{
BDRVQcowState *s = bs->opaque;
uint64_t old_l2_offset;
uint64_t *l2_table;
int64_t l2_offset;
int ret;
old_l2_offset = s->l1_table[l1_index];
/* allocate a new l2 entry */
l2_offset = qcow2_alloc_clusters(bs, s->l2_size * sizeof(uint64_t));
if (l2_offset < 0) {
return l2_offset;
}
ret = qcow2_cache_flush(bs, s->refcount_block_cache);
if (ret < 0) {
goto fail;
}
/* allocate a new entry in the l2 cache */
ret = qcow2_cache_get_empty(bs, s->l2_table_cache, l2_offset, (void**) table);
if (ret < 0) {
return ret;
}
l2_table = *table;
if (old_l2_offset == 0) {
/* if there was no old l2 table, clear the new table */
memset(l2_table, 0, s->l2_size * sizeof(uint64_t));
} else {
uint64_t* old_table;
/* if there was an old l2 table, read it from the disk */
BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_COW_READ);
ret = qcow2_cache_get(bs, s->l2_table_cache, old_l2_offset,
(void**) &old_table);
if (ret < 0) {
goto fail;
}
memcpy(l2_table, old_table, s->cluster_size);
ret = qcow2_cache_put(bs, s->l2_table_cache, (void**) &old_table);
if (ret < 0) {
goto fail;
}
}
/* write the l2 table to the file */
BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_WRITE);
qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_table);
ret = qcow2_cache_flush(bs, s->l2_table_cache);
if (ret < 0) {
goto fail;
}
/* update the L1 entry */
s->l1_table[l1_index] = l2_offset | QCOW_OFLAG_COPIED;
ret = write_l1_entry(bs, l1_index);
if (ret < 0) {
goto fail;
}
*table = l2_table;
return 0;
fail:
qcow2_cache_put(bs, s->l2_table_cache, (void**) table);
s->l1_table[l1_index] = old_l2_offset;
return ret;
}
static int count_contiguous_clusters(uint64_t nb_clusters, int cluster_size,
uint64_t *l2_table, uint64_t start, uint64_t mask)
{
int i;
uint64_t offset = be64_to_cpu(l2_table[0]) & ~mask;
if (!offset)
return 0;
for (i = start; i < start + nb_clusters; i++)
if (offset + (uint64_t) i * cluster_size != (be64_to_cpu(l2_table[i]) & ~mask))
break;
return (i - start);
}
static int count_contiguous_free_clusters(uint64_t nb_clusters, uint64_t *l2_table)
{
int i = 0;
while(nb_clusters-- && l2_table[i] == 0)
i++;
return i;
}
/* The crypt function is compatible with the linux cryptoloop
algorithm for < 4 GB images. NOTE: out_buf == in_buf is
supported */
void qcow2_encrypt_sectors(BDRVQcowState *s, int64_t sector_num,
uint8_t *out_buf, const uint8_t *in_buf,
int nb_sectors, int enc,
const AES_KEY *key)
{
union {
uint64_t ll[2];
uint8_t b[16];
} ivec;
int i;
for(i = 0; i < nb_sectors; i++) {
ivec.ll[0] = cpu_to_le64(sector_num);
ivec.ll[1] = 0;
AES_cbc_encrypt(in_buf, out_buf, 512, key,
ivec.b, enc);
sector_num++;
in_buf += 512;
out_buf += 512;
}
}
static int qcow2_read(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors)
{
BDRVQcowState *s = bs->opaque;
int ret, index_in_cluster, n, n1;
uint64_t cluster_offset;
struct iovec iov;
QEMUIOVector qiov;
while (nb_sectors > 0) {
n = nb_sectors;
ret = qcow2_get_cluster_offset(bs, sector_num << 9, &n,
&cluster_offset);
if (ret < 0) {
return ret;
}
index_in_cluster = sector_num & (s->cluster_sectors - 1);
if (!cluster_offset) {
if (bs->backing_hd) {
/* read from the base image */
iov.iov_base = buf;
iov.iov_len = n * 512;
qemu_iovec_init_external(&qiov, &iov, 1);
n1 = qcow2_backing_read1(bs->backing_hd, &qiov, sector_num, n);
if (n1 > 0) {
BLKDBG_EVENT(bs->file, BLKDBG_READ_BACKING);
ret = bdrv_read(bs->backing_hd, sector_num, buf, n1);
if (ret < 0)
return -1;
}
} else {
memset(buf, 0, 512 * n);
}
} else if (cluster_offset & QCOW_OFLAG_COMPRESSED) {
if (qcow2_decompress_cluster(bs, cluster_offset) < 0)
return -1;
memcpy(buf, s->cluster_cache + index_in_cluster * 512, 512 * n);
} else {
BLKDBG_EVENT(bs->file, BLKDBG_READ);
ret = bdrv_pread(bs->file, cluster_offset + index_in_cluster * 512, buf, n * 512);
if (ret != n * 512)
return -1;
if (s->crypt_method) {
qcow2_encrypt_sectors(s, sector_num, buf, buf, n, 0,
&s->aes_decrypt_key);
}
}
nb_sectors -= n;
sector_num += n;
buf += n * 512;
}
return 0;
}
static int copy_sectors(BlockDriverState *bs, uint64_t start_sect,
uint64_t cluster_offset, int n_start, int n_end)
{
BDRVQcowState *s = bs->opaque;
int n, ret;
n = n_end - n_start;
if (n <= 0)
return 0;
BLKDBG_EVENT(bs->file, BLKDBG_COW_READ);
ret = qcow2_read(bs, start_sect + n_start, s->cluster_data, n);
if (ret < 0)
return ret;
if (s->crypt_method) {
qcow2_encrypt_sectors(s, start_sect + n_start,
s->cluster_data,
s->cluster_data, n, 1,
&s->aes_encrypt_key);
}
BLKDBG_EVENT(bs->file, BLKDBG_COW_WRITE);
ret = bdrv_write(bs->file, (cluster_offset >> 9) + n_start,
s->cluster_data, n);
if (ret < 0)
return ret;
return 0;
}
/*
* get_cluster_offset
*
* For a given offset of the disk image, find the cluster offset in
* qcow2 file. The offset is stored in *cluster_offset.
*
* on entry, *num is the number of contiguous clusters we'd like to
* access following offset.
*
* on exit, *num is the number of contiguous clusters we can read.
*
* Return 0, if the offset is found
* Return -errno, otherwise.
*
*/
int qcow2_get_cluster_offset(BlockDriverState *bs, uint64_t offset,
int *num, uint64_t *cluster_offset)
{
BDRVQcowState *s = bs->opaque;
unsigned int l1_index, l2_index;
uint64_t l2_offset, *l2_table;
int l1_bits, c;
unsigned int index_in_cluster, nb_clusters;
uint64_t nb_available, nb_needed;
int ret;
index_in_cluster = (offset >> 9) & (s->cluster_sectors - 1);
nb_needed = *num + index_in_cluster;
l1_bits = s->l2_bits + s->cluster_bits;
/* compute how many bytes there are between the offset and
* the end of the l1 entry
*/
nb_available = (1ULL << l1_bits) - (offset & ((1ULL << l1_bits) - 1));
/* compute the number of available sectors */
nb_available = (nb_available >> 9) + index_in_cluster;
if (nb_needed > nb_available) {
nb_needed = nb_available;
}
*cluster_offset = 0;
/* seek the the l2 offset in the l1 table */
l1_index = offset >> l1_bits;
if (l1_index >= s->l1_size)
goto out;
l2_offset = s->l1_table[l1_index];
/* seek the l2 table of the given l2 offset */
if (!l2_offset)
goto out;
/* load the l2 table in memory */
l2_offset &= ~QCOW_OFLAG_COPIED;
ret = l2_load(bs, l2_offset, &l2_table);
if (ret < 0) {
return ret;
}
/* find the cluster offset for the given disk offset */
l2_index = (offset >> s->cluster_bits) & (s->l2_size - 1);
*cluster_offset = be64_to_cpu(l2_table[l2_index]);
nb_clusters = size_to_clusters(s, nb_needed << 9);
if (!*cluster_offset) {
/* how many empty clusters ? */
c = count_contiguous_free_clusters(nb_clusters, &l2_table[l2_index]);
} else {
/* how many allocated clusters ? */
c = count_contiguous_clusters(nb_clusters, s->cluster_size,
&l2_table[l2_index], 0, QCOW_OFLAG_COPIED);
}
qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
nb_available = (c * s->cluster_sectors);
out:
if (nb_available > nb_needed)
nb_available = nb_needed;
*num = nb_available - index_in_cluster;
*cluster_offset &=~QCOW_OFLAG_COPIED;
return 0;
}
/*
* get_cluster_table
*
* for a given disk offset, load (and allocate if needed)
* the l2 table.
*
* the l2 table offset in the qcow2 file and the cluster index
* in the l2 table are given to the caller.
*
* Returns 0 on success, -errno in failure case
*/
static int get_cluster_table(BlockDriverState *bs, uint64_t offset,
uint64_t **new_l2_table,
uint64_t *new_l2_offset,
int *new_l2_index)
{
BDRVQcowState *s = bs->opaque;
unsigned int l1_index, l2_index;
uint64_t l2_offset;
uint64_t *l2_table = NULL;
int ret;
/* seek the the l2 offset in the l1 table */
l1_index = offset >> (s->l2_bits + s->cluster_bits);
if (l1_index >= s->l1_size) {
ret = qcow2_grow_l1_table(bs, l1_index + 1, false);
if (ret < 0) {
return ret;
}
}
l2_offset = s->l1_table[l1_index];
/* seek the l2 table of the given l2 offset */
if (l2_offset & QCOW_OFLAG_COPIED) {
/* load the l2 table in memory */
l2_offset &= ~QCOW_OFLAG_COPIED;
ret = l2_load(bs, l2_offset, &l2_table);
if (ret < 0) {
return ret;
}
} else {
/* First allocate a new L2 table (and do COW if needed) */
ret = l2_allocate(bs, l1_index, &l2_table);
if (ret < 0) {
return ret;
}
/* Then decrease the refcount of the old table */
if (l2_offset) {
qcow2_free_clusters(bs, l2_offset, s->l2_size * sizeof(uint64_t));
}
l2_offset = s->l1_table[l1_index] & ~QCOW_OFLAG_COPIED;
}
/* find the cluster offset for the given disk offset */
l2_index = (offset >> s->cluster_bits) & (s->l2_size - 1);
*new_l2_table = l2_table;
*new_l2_offset = l2_offset;
*new_l2_index = l2_index;
return 0;
}
/*
* alloc_compressed_cluster_offset
*
* For a given offset of the disk image, return cluster offset in
* qcow2 file.
*
* If the offset is not found, allocate a new compressed cluster.
*
* Return the cluster offset if successful,
* Return 0, otherwise.
*
*/
uint64_t qcow2_alloc_compressed_cluster_offset(BlockDriverState *bs,
uint64_t offset,
int compressed_size)
{
BDRVQcowState *s = bs->opaque;
int l2_index, ret;
uint64_t l2_offset, *l2_table;
int64_t cluster_offset;
int nb_csectors;
ret = get_cluster_table(bs, offset, &l2_table, &l2_offset, &l2_index);
if (ret < 0) {
return 0;
}
cluster_offset = be64_to_cpu(l2_table[l2_index]);
if (cluster_offset & QCOW_OFLAG_COPIED)
return cluster_offset & ~QCOW_OFLAG_COPIED;
if (cluster_offset)
qcow2_free_any_clusters(bs, cluster_offset, 1);
cluster_offset = qcow2_alloc_bytes(bs, compressed_size);
if (cluster_offset < 0) {
qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
return 0;
}
nb_csectors = ((cluster_offset + compressed_size - 1) >> 9) -
(cluster_offset >> 9);
cluster_offset |= QCOW_OFLAG_COMPRESSED |
((uint64_t)nb_csectors << s->csize_shift);
/* update L2 table */
/* compressed clusters never have the copied flag */
BLKDBG_EVENT(bs->file, BLKDBG_L2_UPDATE_COMPRESSED);
qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_table);
l2_table[l2_index] = cpu_to_be64(cluster_offset);
ret = qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
if (ret < 0) {
return 0;
}
return cluster_offset;
}
int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m)
{
BDRVQcowState *s = bs->opaque;
int i, j = 0, l2_index, ret;
uint64_t *old_cluster, start_sect, l2_offset, *l2_table;
uint64_t cluster_offset = m->cluster_offset;
bool cow = false;
if (m->nb_clusters == 0)
return 0;
old_cluster = qemu_malloc(m->nb_clusters * sizeof(uint64_t));
/* copy content of unmodified sectors */
start_sect = (m->offset & ~(s->cluster_size - 1)) >> 9;
if (m->n_start) {
cow = true;
ret = copy_sectors(bs, start_sect, cluster_offset, 0, m->n_start);
if (ret < 0)
goto err;
}
if (m->nb_available & (s->cluster_sectors - 1)) {
uint64_t end = m->nb_available & ~(uint64_t)(s->cluster_sectors - 1);
cow = true;
ret = copy_sectors(bs, start_sect + end, cluster_offset + (end << 9),
m->nb_available - end, s->cluster_sectors);
if (ret < 0)
goto err;
}
/*
* Update L2 table.
*
* Before we update the L2 table to actually point to the new cluster, we
* need to be sure that the refcounts have been increased and COW was
* handled.
*/
if (cow) {
qcow2_cache_depends_on_flush(s->l2_table_cache);
}
qcow2_cache_set_dependency(bs, s->l2_table_cache, s->refcount_block_cache);
ret = get_cluster_table(bs, m->offset, &l2_table, &l2_offset, &l2_index);
if (ret < 0) {
goto err;
}
qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_table);
for (i = 0; i < m->nb_clusters; i++) {
/* if two concurrent writes happen to the same unallocated cluster
* each write allocates separate cluster and writes data concurrently.
* The first one to complete updates l2 table with pointer to its
* cluster the second one has to do RMW (which is done above by
* copy_sectors()), update l2 table with its cluster pointer and free
* old cluster. This is what this loop does */
if(l2_table[l2_index + i] != 0)
old_cluster[j++] = l2_table[l2_index + i];
l2_table[l2_index + i] = cpu_to_be64((cluster_offset +
(i << s->cluster_bits)) | QCOW_OFLAG_COPIED);
}
ret = qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
if (ret < 0) {
goto err;
}
/*
* If this was a COW, we need to decrease the refcount of the old cluster.
* Also flush bs->file to get the right order for L2 and refcount update.
*/
if (j != 0) {
for (i = 0; i < j; i++) {
qcow2_free_any_clusters(bs,
be64_to_cpu(old_cluster[i]) & ~QCOW_OFLAG_COPIED, 1);
}
}
ret = 0;
err:
qemu_free(old_cluster);
return ret;
}
/*
* alloc_cluster_offset
*
* For a given offset of the disk image, return cluster offset in qcow2 file.
* If the offset is not found, allocate a new cluster.
*
* If the cluster was already allocated, m->nb_clusters is set to 0,
* m->depends_on is set to NULL and the other fields in m are meaningless.
*
* If the cluster is newly allocated, m->nb_clusters is set to the number of
* contiguous clusters that have been allocated. This may be 0 if the request
* conflict with another write request in flight; in this case, m->depends_on
* is set and the remaining fields of m are meaningless.
*
* If m->nb_clusters is non-zero, the other fields of m are valid and contain
* information about the first allocated cluster.
*
* Return 0 on success and -errno in error cases
*/
int qcow2_alloc_cluster_offset(BlockDriverState *bs, uint64_t offset,
int n_start, int n_end, int *num, QCowL2Meta *m)
{
BDRVQcowState *s = bs->opaque;
int l2_index, ret;
uint64_t l2_offset, *l2_table;
int64_t cluster_offset;
unsigned int nb_clusters, i = 0;
QCowL2Meta *old_alloc;
ret = get_cluster_table(bs, offset, &l2_table, &l2_offset, &l2_index);
if (ret < 0) {
return ret;
}
nb_clusters = size_to_clusters(s, n_end << 9);
nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
cluster_offset = be64_to_cpu(l2_table[l2_index]);
/* We keep all QCOW_OFLAG_COPIED clusters */
if (cluster_offset & QCOW_OFLAG_COPIED) {
nb_clusters = count_contiguous_clusters(nb_clusters, s->cluster_size,
&l2_table[l2_index], 0, 0);
cluster_offset &= ~QCOW_OFLAG_COPIED;
m->nb_clusters = 0;
m->depends_on = NULL;
goto out;
}
/* for the moment, multiple compressed clusters are not managed */
if (cluster_offset & QCOW_OFLAG_COMPRESSED)
nb_clusters = 1;
/* how many available clusters ? */
while (i < nb_clusters) {
i += count_contiguous_clusters(nb_clusters - i, s->cluster_size,
&l2_table[l2_index], i, 0);
if ((i >= nb_clusters) || be64_to_cpu(l2_table[l2_index + i])) {
break;
}
i += count_contiguous_free_clusters(nb_clusters - i,
&l2_table[l2_index + i]);
if (i >= nb_clusters) {
break;
}
cluster_offset = be64_to_cpu(l2_table[l2_index + i]);
if ((cluster_offset & QCOW_OFLAG_COPIED) ||
(cluster_offset & QCOW_OFLAG_COMPRESSED))
break;
}
assert(i <= nb_clusters);
nb_clusters = i;
/*
* Check if there already is an AIO write request in flight which allocates
* the same cluster. In this case we need to wait until the previous
* request has completed and updated the L2 table accordingly.
*/
QLIST_FOREACH(old_alloc, &s->cluster_allocs, next_in_flight) {
uint64_t end_offset = offset + nb_clusters * s->cluster_size;
uint64_t old_offset = old_alloc->offset;
uint64_t old_end_offset = old_alloc->offset +
old_alloc->nb_clusters * s->cluster_size;
if (end_offset < old_offset || offset > old_end_offset) {
/* No intersection */
} else {
if (offset < old_offset) {
/* Stop at the start of a running allocation */
nb_clusters = (old_offset - offset) >> s->cluster_bits;
} else {
nb_clusters = 0;
}
if (nb_clusters == 0) {
/* Set dependency and wait for a callback */
m->depends_on = old_alloc;
m->nb_clusters = 0;
*num = 0;
ret = 0;
goto fail;
}
}
}
if (!nb_clusters) {
abort();
}
QLIST_INSERT_HEAD(&s->cluster_allocs, m, next_in_flight);
/* allocate a new cluster */
cluster_offset = qcow2_alloc_clusters(bs, nb_clusters * s->cluster_size);
if (cluster_offset < 0) {
QLIST_REMOVE(m, next_in_flight);
ret = cluster_offset;
goto fail;
}
/* save info needed for meta data update */
m->offset = offset;
m->n_start = n_start;
m->nb_clusters = nb_clusters;
out:
ret = qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
if (ret < 0) {
return ret;
}
m->nb_available = MIN(nb_clusters << (s->cluster_bits - 9), n_end);
m->cluster_offset = cluster_offset;
*num = m->nb_available - n_start;
return 0;
fail:
qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
return ret;
}
static int decompress_buffer(uint8_t *out_buf, int out_buf_size,
const uint8_t *buf, int buf_size)
{
z_stream strm1, *strm = &strm1;
int ret, out_len;
memset(strm, 0, sizeof(*strm));
strm->next_in = (uint8_t *)buf;
strm->avail_in = buf_size;
strm->next_out = out_buf;
strm->avail_out = out_buf_size;
ret = inflateInit2(strm, -12);
if (ret != Z_OK)
return -1;
ret = inflate(strm, Z_FINISH);
out_len = strm->next_out - out_buf;
if ((ret != Z_STREAM_END && ret != Z_BUF_ERROR) ||
out_len != out_buf_size) {
inflateEnd(strm);
return -1;
}
inflateEnd(strm);
return 0;
}
int qcow2_decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset)
{
BDRVQcowState *s = bs->opaque;
int ret, csize, nb_csectors, sector_offset;
uint64_t coffset;
coffset = cluster_offset & s->cluster_offset_mask;
if (s->cluster_cache_offset != coffset) {
nb_csectors = ((cluster_offset >> s->csize_shift) & s->csize_mask) + 1;
sector_offset = coffset & 511;
csize = nb_csectors * 512 - sector_offset;
BLKDBG_EVENT(bs->file, BLKDBG_READ_COMPRESSED);
ret = bdrv_read(bs->file, coffset >> 9, s->cluster_data, nb_csectors);
if (ret < 0) {
return ret;
}
if (decompress_buffer(s->cluster_cache, s->cluster_size,
s->cluster_data + sector_offset, csize) < 0) {
return -EIO;
}
s->cluster_cache_offset = coffset;
}
return 0;
}
/*
* This discards as many clusters of nb_clusters as possible at once (i.e.
* all clusters in the same L2 table) and returns the number of discarded
* clusters.
*/
static int discard_single_l2(BlockDriverState *bs, uint64_t offset,
unsigned int nb_clusters)
{
BDRVQcowState *s = bs->opaque;
uint64_t l2_offset, *l2_table;
int l2_index;
int ret;
int i;
ret = get_cluster_table(bs, offset, &l2_table, &l2_offset, &l2_index);
if (ret < 0) {
return ret;
}
/* Limit nb_clusters to one L2 table */
nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
for (i = 0; i < nb_clusters; i++) {
uint64_t old_offset;
old_offset = be64_to_cpu(l2_table[l2_index + i]);
old_offset &= ~QCOW_OFLAG_COPIED;
if (old_offset == 0) {
continue;
}
/* First remove L2 entries */
qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_table);
l2_table[l2_index + i] = cpu_to_be64(0);
/* Then decrease the refcount */
qcow2_free_any_clusters(bs, old_offset, 1);
}
ret = qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
if (ret < 0) {
return ret;
}
return nb_clusters;
}
int qcow2_discard_clusters(BlockDriverState *bs, uint64_t offset,
int nb_sectors)
{
BDRVQcowState *s = bs->opaque;
uint64_t end_offset;
unsigned int nb_clusters;
int ret;
end_offset = offset + (nb_sectors << BDRV_SECTOR_BITS);
/* Round start up and end down */
offset = align_offset(offset, s->cluster_size);
end_offset &= ~(s->cluster_size - 1);
if (offset > end_offset) {
return 0;
}
nb_clusters = size_to_clusters(s, end_offset - offset);
/* Each L2 table is handled by its own loop iteration */
while (nb_clusters > 0) {
ret = discard_single_l2(bs, offset, nb_clusters);
if (ret < 0) {
return ret;
}
nb_clusters -= ret;
offset += (ret * s->cluster_size);
}
return 0;
}

File diff suppressed because it is too large Load Diff

View File

@@ -1,451 +0,0 @@
/*
* Block driver for the QCOW version 2 format
*
* Copyright (c) 2004-2006 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu-common.h"
#include "block_int.h"
#include "block/qcow2.h"
typedef struct __attribute__((packed)) QCowSnapshotHeader {
/* header is 8 byte aligned */
uint64_t l1_table_offset;
uint32_t l1_size;
uint16_t id_str_size;
uint16_t name_size;
uint32_t date_sec;
uint32_t date_nsec;
uint64_t vm_clock_nsec;
uint32_t vm_state_size;
uint32_t extra_data_size; /* for extension */
/* extra data follows */
/* id_str follows */
/* name follows */
} QCowSnapshotHeader;
void qcow2_free_snapshots(BlockDriverState *bs)
{
BDRVQcowState *s = bs->opaque;
int i;
for(i = 0; i < s->nb_snapshots; i++) {
qemu_free(s->snapshots[i].name);
qemu_free(s->snapshots[i].id_str);
}
qemu_free(s->snapshots);
s->snapshots = NULL;
s->nb_snapshots = 0;
}
int qcow2_read_snapshots(BlockDriverState *bs)
{
BDRVQcowState *s = bs->opaque;
QCowSnapshotHeader h;
QCowSnapshot *sn;
int i, id_str_size, name_size;
int64_t offset;
uint32_t extra_data_size;
if (!s->nb_snapshots) {
s->snapshots = NULL;
s->snapshots_size = 0;
return 0;
}
offset = s->snapshots_offset;
s->snapshots = qemu_mallocz(s->nb_snapshots * sizeof(QCowSnapshot));
for(i = 0; i < s->nb_snapshots; i++) {
offset = align_offset(offset, 8);
if (bdrv_pread(bs->file, offset, &h, sizeof(h)) != sizeof(h))
goto fail;
offset += sizeof(h);
sn = s->snapshots + i;
sn->l1_table_offset = be64_to_cpu(h.l1_table_offset);
sn->l1_size = be32_to_cpu(h.l1_size);
sn->vm_state_size = be32_to_cpu(h.vm_state_size);
sn->date_sec = be32_to_cpu(h.date_sec);
sn->date_nsec = be32_to_cpu(h.date_nsec);
sn->vm_clock_nsec = be64_to_cpu(h.vm_clock_nsec);
extra_data_size = be32_to_cpu(h.extra_data_size);
id_str_size = be16_to_cpu(h.id_str_size);
name_size = be16_to_cpu(h.name_size);
offset += extra_data_size;
sn->id_str = qemu_malloc(id_str_size + 1);
if (bdrv_pread(bs->file, offset, sn->id_str, id_str_size) != id_str_size)
goto fail;
offset += id_str_size;
sn->id_str[id_str_size] = '\0';
sn->name = qemu_malloc(name_size + 1);
if (bdrv_pread(bs->file, offset, sn->name, name_size) != name_size)
goto fail;
offset += name_size;
sn->name[name_size] = '\0';
}
s->snapshots_size = offset - s->snapshots_offset;
return 0;
fail:
qcow2_free_snapshots(bs);
return -1;
}
/* add at the end of the file a new list of snapshots */
static int qcow2_write_snapshots(BlockDriverState *bs)
{
BDRVQcowState *s = bs->opaque;
QCowSnapshot *sn;
QCowSnapshotHeader h;
int i, name_size, id_str_size, snapshots_size;
uint64_t data64;
uint32_t data32;
int64_t offset, snapshots_offset;
/* compute the size of the snapshots */
offset = 0;
for(i = 0; i < s->nb_snapshots; i++) {
sn = s->snapshots + i;
offset = align_offset(offset, 8);
offset += sizeof(h);
offset += strlen(sn->id_str);
offset += strlen(sn->name);
}
snapshots_size = offset;
snapshots_offset = qcow2_alloc_clusters(bs, snapshots_size);
bdrv_flush(bs->file);
offset = snapshots_offset;
if (offset < 0) {
return offset;
}
for(i = 0; i < s->nb_snapshots; i++) {
sn = s->snapshots + i;
memset(&h, 0, sizeof(h));
h.l1_table_offset = cpu_to_be64(sn->l1_table_offset);
h.l1_size = cpu_to_be32(sn->l1_size);
h.vm_state_size = cpu_to_be32(sn->vm_state_size);
h.date_sec = cpu_to_be32(sn->date_sec);
h.date_nsec = cpu_to_be32(sn->date_nsec);
h.vm_clock_nsec = cpu_to_be64(sn->vm_clock_nsec);
id_str_size = strlen(sn->id_str);
name_size = strlen(sn->name);
h.id_str_size = cpu_to_be16(id_str_size);
h.name_size = cpu_to_be16(name_size);
offset = align_offset(offset, 8);
if (bdrv_pwrite_sync(bs->file, offset, &h, sizeof(h)) < 0)
goto fail;
offset += sizeof(h);
if (bdrv_pwrite_sync(bs->file, offset, sn->id_str, id_str_size) < 0)
goto fail;
offset += id_str_size;
if (bdrv_pwrite_sync(bs->file, offset, sn->name, name_size) < 0)
goto fail;
offset += name_size;
}
/* update the various header fields */
data64 = cpu_to_be64(snapshots_offset);
if (bdrv_pwrite_sync(bs->file, offsetof(QCowHeader, snapshots_offset),
&data64, sizeof(data64)) < 0)
goto fail;
data32 = cpu_to_be32(s->nb_snapshots);
if (bdrv_pwrite_sync(bs->file, offsetof(QCowHeader, nb_snapshots),
&data32, sizeof(data32)) < 0)
goto fail;
/* free the old snapshot table */
qcow2_free_clusters(bs, s->snapshots_offset, s->snapshots_size);
s->snapshots_offset = snapshots_offset;
s->snapshots_size = snapshots_size;
return 0;
fail:
return -1;
}
static void find_new_snapshot_id(BlockDriverState *bs,
char *id_str, int id_str_size)
{
BDRVQcowState *s = bs->opaque;
QCowSnapshot *sn;
int i, id, id_max = 0;
for(i = 0; i < s->nb_snapshots; i++) {
sn = s->snapshots + i;
id = strtoul(sn->id_str, NULL, 10);
if (id > id_max)
id_max = id;
}
snprintf(id_str, id_str_size, "%d", id_max + 1);
}
static int find_snapshot_by_id(BlockDriverState *bs, const char *id_str)
{
BDRVQcowState *s = bs->opaque;
int i;
for(i = 0; i < s->nb_snapshots; i++) {
if (!strcmp(s->snapshots[i].id_str, id_str))
return i;
}
return -1;
}
static int find_snapshot_by_id_or_name(BlockDriverState *bs, const char *name)
{
BDRVQcowState *s = bs->opaque;
int i, ret;
ret = find_snapshot_by_id(bs, name);
if (ret >= 0)
return ret;
for(i = 0; i < s->nb_snapshots; i++) {
if (!strcmp(s->snapshots[i].name, name))
return i;
}
return -1;
}
/* if no id is provided, a new one is constructed */
int qcow2_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info)
{
BDRVQcowState *s = bs->opaque;
QCowSnapshot *snapshots1, sn1, *sn = &sn1;
int i, ret;
uint64_t *l1_table = NULL;
int64_t l1_table_offset;
memset(sn, 0, sizeof(*sn));
if (sn_info->id_str[0] == '\0') {
/* compute a new id */
find_new_snapshot_id(bs, sn_info->id_str, sizeof(sn_info->id_str));
}
/* check that the ID is unique */
if (find_snapshot_by_id(bs, sn_info->id_str) >= 0)
return -ENOENT;
sn->id_str = qemu_strdup(sn_info->id_str);
if (!sn->id_str)
goto fail;
sn->name = qemu_strdup(sn_info->name);
if (!sn->name)
goto fail;
sn->vm_state_size = sn_info->vm_state_size;
sn->date_sec = sn_info->date_sec;
sn->date_nsec = sn_info->date_nsec;
sn->vm_clock_nsec = sn_info->vm_clock_nsec;
ret = qcow2_update_snapshot_refcount(bs, s->l1_table_offset, s->l1_size, 1);
if (ret < 0)
goto fail;
/* create the L1 table of the snapshot */
l1_table_offset = qcow2_alloc_clusters(bs, s->l1_size * sizeof(uint64_t));
if (l1_table_offset < 0) {
goto fail;
}
bdrv_flush(bs->file);
sn->l1_table_offset = l1_table_offset;
sn->l1_size = s->l1_size;
if (s->l1_size != 0) {
l1_table = qemu_malloc(s->l1_size * sizeof(uint64_t));
} else {
l1_table = NULL;
}
for(i = 0; i < s->l1_size; i++) {
l1_table[i] = cpu_to_be64(s->l1_table[i]);
}
if (bdrv_pwrite_sync(bs->file, sn->l1_table_offset,
l1_table, s->l1_size * sizeof(uint64_t)) < 0)
goto fail;
qemu_free(l1_table);
l1_table = NULL;
snapshots1 = qemu_malloc((s->nb_snapshots + 1) * sizeof(QCowSnapshot));
if (s->snapshots) {
memcpy(snapshots1, s->snapshots, s->nb_snapshots * sizeof(QCowSnapshot));
qemu_free(s->snapshots);
}
s->snapshots = snapshots1;
s->snapshots[s->nb_snapshots++] = *sn;
if (qcow2_write_snapshots(bs) < 0)
goto fail;
#ifdef DEBUG_ALLOC
qcow2_check_refcounts(bs);
#endif
return 0;
fail:
qemu_free(sn->name);
qemu_free(l1_table);
return -1;
}
/* copy the snapshot 'snapshot_name' into the current disk image */
int qcow2_snapshot_goto(BlockDriverState *bs, const char *snapshot_id)
{
BDRVQcowState *s = bs->opaque;
QCowSnapshot *sn;
int i, snapshot_index, l1_size2;
snapshot_index = find_snapshot_by_id_or_name(bs, snapshot_id);
if (snapshot_index < 0)
return -ENOENT;
sn = &s->snapshots[snapshot_index];
if (qcow2_update_snapshot_refcount(bs, s->l1_table_offset, s->l1_size, -1) < 0)
goto fail;
if (qcow2_grow_l1_table(bs, sn->l1_size, true) < 0)
goto fail;
s->l1_size = sn->l1_size;
l1_size2 = s->l1_size * sizeof(uint64_t);
/* copy the snapshot l1 table to the current l1 table */
if (bdrv_pread(bs->file, sn->l1_table_offset,
s->l1_table, l1_size2) != l1_size2)
goto fail;
if (bdrv_pwrite_sync(bs->file, s->l1_table_offset,
s->l1_table, l1_size2) < 0)
goto fail;
for(i = 0;i < s->l1_size; i++) {
be64_to_cpus(&s->l1_table[i]);
}
if (qcow2_update_snapshot_refcount(bs, s->l1_table_offset, s->l1_size, 1) < 0)
goto fail;
#ifdef DEBUG_ALLOC
qcow2_check_refcounts(bs);
#endif
return 0;
fail:
return -EIO;
}
int qcow2_snapshot_delete(BlockDriverState *bs, const char *snapshot_id)
{
BDRVQcowState *s = bs->opaque;
QCowSnapshot *sn;
int snapshot_index, ret;
snapshot_index = find_snapshot_by_id_or_name(bs, snapshot_id);
if (snapshot_index < 0)
return -ENOENT;
sn = &s->snapshots[snapshot_index];
ret = qcow2_update_snapshot_refcount(bs, sn->l1_table_offset, sn->l1_size, -1);
if (ret < 0)
return ret;
/* must update the copied flag on the current cluster offsets */
ret = qcow2_update_snapshot_refcount(bs, s->l1_table_offset, s->l1_size, 0);
if (ret < 0)
return ret;
qcow2_free_clusters(bs, sn->l1_table_offset, sn->l1_size * sizeof(uint64_t));
qemu_free(sn->id_str);
qemu_free(sn->name);
memmove(sn, sn + 1, (s->nb_snapshots - snapshot_index - 1) * sizeof(*sn));
s->nb_snapshots--;
ret = qcow2_write_snapshots(bs);
if (ret < 0) {
/* XXX: restore snapshot if error ? */
return ret;
}
#ifdef DEBUG_ALLOC
qcow2_check_refcounts(bs);
#endif
return 0;
}
int qcow2_snapshot_list(BlockDriverState *bs, QEMUSnapshotInfo **psn_tab)
{
BDRVQcowState *s = bs->opaque;
QEMUSnapshotInfo *sn_tab, *sn_info;
QCowSnapshot *sn;
int i;
if (!s->nb_snapshots) {
*psn_tab = NULL;
return s->nb_snapshots;
}
sn_tab = qemu_mallocz(s->nb_snapshots * sizeof(QEMUSnapshotInfo));
for(i = 0; i < s->nb_snapshots; i++) {
sn_info = sn_tab + i;
sn = s->snapshots + i;
pstrcpy(sn_info->id_str, sizeof(sn_info->id_str),
sn->id_str);
pstrcpy(sn_info->name, sizeof(sn_info->name),
sn->name);
sn_info->vm_state_size = sn->vm_state_size;
sn_info->date_sec = sn->date_sec;
sn_info->date_nsec = sn->date_nsec;
sn_info->vm_clock_nsec = sn->vm_clock_nsec;
}
*psn_tab = sn_tab;
return s->nb_snapshots;
}
int qcow2_snapshot_load_tmp(BlockDriverState *bs, const char *snapshot_name)
{
int i, snapshot_index, l1_size2;
BDRVQcowState *s = bs->opaque;
QCowSnapshot *sn;
snapshot_index = find_snapshot_by_id_or_name(bs, snapshot_name);
if (snapshot_index < 0) {
return -ENOENT;
}
sn = &s->snapshots[snapshot_index];
s->l1_size = sn->l1_size;
l1_size2 = s->l1_size * sizeof(uint64_t);
if (s->l1_table != NULL) {
qemu_free(s->l1_table);
}
s->l1_table_offset = sn->l1_table_offset;
s->l1_table = qemu_mallocz(align_offset(l1_size2, 512));
if (bdrv_pread(bs->file, sn->l1_table_offset,
s->l1_table, l1_size2) != l1_size2) {
return -1;
}
for(i = 0;i < s->l1_size; i++) {
be64_to_cpus(&s->l1_table[i]);
}
return 0;
}

File diff suppressed because it is too large Load Diff

View File

@@ -1,242 +0,0 @@
/*
* Block driver for the QCOW version 2 format
*
* Copyright (c) 2004-2006 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef BLOCK_QCOW2_H
#define BLOCK_QCOW2_H
#include "aes.h"
//#define DEBUG_ALLOC
//#define DEBUG_ALLOC2
//#define DEBUG_EXT
#define QCOW_MAGIC (('Q' << 24) | ('F' << 16) | ('I' << 8) | 0xfb)
#define QCOW_VERSION 2
#define QCOW_CRYPT_NONE 0
#define QCOW_CRYPT_AES 1
#define QCOW_MAX_CRYPT_CLUSTERS 32
/* indicate that the refcount of the referenced cluster is exactly one. */
#define QCOW_OFLAG_COPIED (1LL << 63)
/* indicate that the cluster is compressed (they never have the copied flag) */
#define QCOW_OFLAG_COMPRESSED (1LL << 62)
#define REFCOUNT_SHIFT 1 /* refcount size is 2 bytes */
#define MIN_CLUSTER_BITS 9
#define MAX_CLUSTER_BITS 21
#define L2_CACHE_SIZE 16
/* Must be at least 4 to cover all cases of refcount table growth */
#define REFCOUNT_CACHE_SIZE 4
typedef struct QCowHeader {
uint32_t magic;
uint32_t version;
uint64_t backing_file_offset;
uint32_t backing_file_size;
uint32_t cluster_bits;
uint64_t size; /* in bytes */
uint32_t crypt_method;
uint32_t l1_size; /* XXX: save number of clusters instead ? */
uint64_t l1_table_offset;
uint64_t refcount_table_offset;
uint32_t refcount_table_clusters;
uint32_t nb_snapshots;
uint64_t snapshots_offset;
} QCowHeader;
typedef struct QCowSnapshot {
uint64_t l1_table_offset;
uint32_t l1_size;
char *id_str;
char *name;
uint32_t vm_state_size;
uint32_t date_sec;
uint32_t date_nsec;
uint64_t vm_clock_nsec;
} QCowSnapshot;
struct Qcow2Cache;
typedef struct Qcow2Cache Qcow2Cache;
typedef struct BDRVQcowState {
int cluster_bits;
int cluster_size;
int cluster_sectors;
int l2_bits;
int l2_size;
int l1_size;
int l1_vm_state_index;
int csize_shift;
int csize_mask;
uint64_t cluster_offset_mask;
uint64_t l1_table_offset;
uint64_t *l1_table;
Qcow2Cache* l2_table_cache;
Qcow2Cache* refcount_block_cache;
uint8_t *cluster_cache;
uint8_t *cluster_data;
uint64_t cluster_cache_offset;
QLIST_HEAD(QCowClusterAlloc, QCowL2Meta) cluster_allocs;
uint64_t *refcount_table;
uint64_t refcount_table_offset;
uint32_t refcount_table_size;
int64_t free_cluster_index;
int64_t free_byte_offset;
uint32_t crypt_method; /* current crypt method, 0 if no key yet */
uint32_t crypt_method_header;
AES_KEY aes_encrypt_key;
AES_KEY aes_decrypt_key;
uint64_t snapshots_offset;
int snapshots_size;
int nb_snapshots;
QCowSnapshot *snapshots;
} BDRVQcowState;
/* XXX: use std qcow open function ? */
typedef struct QCowCreateState {
int cluster_size;
int cluster_bits;
uint16_t *refcount_block;
uint64_t *refcount_table;
int64_t l1_table_offset;
int64_t refcount_table_offset;
int64_t refcount_block_offset;
} QCowCreateState;
struct QCowAIOCB;
/* XXX This could be private for qcow2-cluster.c */
typedef struct QCowL2Meta
{
uint64_t offset;
uint64_t cluster_offset;
int n_start;
int nb_available;
int nb_clusters;
struct QCowL2Meta *depends_on;
QLIST_HEAD(QCowAioDependencies, QCowAIOCB) dependent_requests;
QLIST_ENTRY(QCowL2Meta) next_in_flight;
} QCowL2Meta;
static inline int size_to_clusters(BDRVQcowState *s, int64_t size)
{
return (size + (s->cluster_size - 1)) >> s->cluster_bits;
}
static inline int size_to_l1(BDRVQcowState *s, int64_t size)
{
int shift = s->cluster_bits + s->l2_bits;
return (size + (1ULL << shift) - 1) >> shift;
}
static inline int64_t align_offset(int64_t offset, int n)
{
offset = (offset + n - 1) & ~(n - 1);
return offset;
}
// FIXME Need qcow2_ prefix to global functions
/* qcow2.c functions */
int qcow2_backing_read1(BlockDriverState *bs, QEMUIOVector *qiov,
int64_t sector_num, int nb_sectors);
/* qcow2-refcount.c functions */
int qcow2_refcount_init(BlockDriverState *bs);
void qcow2_refcount_close(BlockDriverState *bs);
int64_t qcow2_alloc_clusters(BlockDriverState *bs, int64_t size);
int64_t qcow2_alloc_bytes(BlockDriverState *bs, int size);
void qcow2_free_clusters(BlockDriverState *bs,
int64_t offset, int64_t size);
void qcow2_free_any_clusters(BlockDriverState *bs,
uint64_t cluster_offset, int nb_clusters);
void qcow2_create_refcount_update(QCowCreateState *s, int64_t offset,
int64_t size);
int qcow2_update_snapshot_refcount(BlockDriverState *bs,
int64_t l1_table_offset, int l1_size, int addend);
int qcow2_check_refcounts(BlockDriverState *bs, BdrvCheckResult *res);
/* qcow2-cluster.c functions */
int qcow2_grow_l1_table(BlockDriverState *bs, int min_size, bool exact_size);
void qcow2_l2_cache_reset(BlockDriverState *bs);
int qcow2_decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset);
void qcow2_encrypt_sectors(BDRVQcowState *s, int64_t sector_num,
uint8_t *out_buf, const uint8_t *in_buf,
int nb_sectors, int enc,
const AES_KEY *key);
int qcow2_get_cluster_offset(BlockDriverState *bs, uint64_t offset,
int *num, uint64_t *cluster_offset);
int qcow2_alloc_cluster_offset(BlockDriverState *bs, uint64_t offset,
int n_start, int n_end, int *num, QCowL2Meta *m);
uint64_t qcow2_alloc_compressed_cluster_offset(BlockDriverState *bs,
uint64_t offset,
int compressed_size);
int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m);
int qcow2_discard_clusters(BlockDriverState *bs, uint64_t offset,
int nb_sectors);
/* qcow2-snapshot.c functions */
int qcow2_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info);
int qcow2_snapshot_goto(BlockDriverState *bs, const char *snapshot_id);
int qcow2_snapshot_delete(BlockDriverState *bs, const char *snapshot_id);
int qcow2_snapshot_list(BlockDriverState *bs, QEMUSnapshotInfo **psn_tab);
int qcow2_snapshot_load_tmp(BlockDriverState *bs, const char *snapshot_name);
void qcow2_free_snapshots(BlockDriverState *bs);
int qcow2_read_snapshots(BlockDriverState *bs);
/* qcow2-cache.c functions */
Qcow2Cache *qcow2_cache_create(BlockDriverState *bs, int num_tables,
bool writethrough);
int qcow2_cache_destroy(BlockDriverState* bs, Qcow2Cache *c);
void qcow2_cache_entry_mark_dirty(Qcow2Cache *c, void *table);
int qcow2_cache_flush(BlockDriverState *bs, Qcow2Cache *c);
int qcow2_cache_set_dependency(BlockDriverState *bs, Qcow2Cache *c,
Qcow2Cache *dependency);
void qcow2_cache_depends_on_flush(Qcow2Cache *c);
int qcow2_cache_get(BlockDriverState *bs, Qcow2Cache *c, uint64_t offset,
void **table);
int qcow2_cache_get_empty(BlockDriverState *bs, Qcow2Cache *c, uint64_t offset,
void **table);
int qcow2_cache_put(BlockDriverState *bs, Qcow2Cache *c, void **table);
#endif

View File

@@ -1,210 +0,0 @@
/*
* QEMU Enhanced Disk Format Consistency Check
*
* Copyright IBM, Corp. 2010
*
* Authors:
* Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
*
* This work is licensed under the terms of the GNU LGPL, version 2 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
#include "qed.h"
typedef struct {
BDRVQEDState *s;
BdrvCheckResult *result;
bool fix; /* whether to fix invalid offsets */
size_t nclusters;
uint32_t *used_clusters; /* referenced cluster bitmap */
QEDRequest request;
} QEDCheck;
static bool qed_test_bit(uint32_t *bitmap, uint64_t n) {
return !!(bitmap[n / 32] & (1 << (n % 32)));
}
static void qed_set_bit(uint32_t *bitmap, uint64_t n) {
bitmap[n / 32] |= 1 << (n % 32);
}
/**
* Set bitmap bits for clusters
*
* @check: Check structure
* @offset: Starting offset in bytes
* @n: Number of clusters
*/
static bool qed_set_used_clusters(QEDCheck *check, uint64_t offset,
unsigned int n)
{
uint64_t cluster = qed_bytes_to_clusters(check->s, offset);
unsigned int corruptions = 0;
while (n-- != 0) {
/* Clusters should only be referenced once */
if (qed_test_bit(check->used_clusters, cluster)) {
corruptions++;
}
qed_set_bit(check->used_clusters, cluster);
cluster++;
}
check->result->corruptions += corruptions;
return corruptions == 0;
}
/**
* Check an L2 table
*
* @ret: Number of invalid cluster offsets
*/
static unsigned int qed_check_l2_table(QEDCheck *check, QEDTable *table)
{
BDRVQEDState *s = check->s;
unsigned int i, num_invalid = 0;
for (i = 0; i < s->table_nelems; i++) {
uint64_t offset = table->offsets[i];
if (!offset) {
continue;
}
/* Detect invalid cluster offset */
if (!qed_check_cluster_offset(s, offset)) {
if (check->fix) {
table->offsets[i] = 0;
} else {
check->result->corruptions++;
}
num_invalid++;
continue;
}
qed_set_used_clusters(check, offset, 1);
}
return num_invalid;
}
/**
* Descend tables and check each cluster is referenced once only
*/
static int qed_check_l1_table(QEDCheck *check, QEDTable *table)
{
BDRVQEDState *s = check->s;
unsigned int i, num_invalid_l1 = 0;
int ret, last_error = 0;
/* Mark L1 table clusters used */
qed_set_used_clusters(check, s->header.l1_table_offset,
s->header.table_size);
for (i = 0; i < s->table_nelems; i++) {
unsigned int num_invalid_l2;
uint64_t offset = table->offsets[i];
if (!offset) {
continue;
}
/* Detect invalid L2 offset */
if (!qed_check_table_offset(s, offset)) {
/* Clear invalid offset */
if (check->fix) {
table->offsets[i] = 0;
} else {
check->result->corruptions++;
}
num_invalid_l1++;
continue;
}
if (!qed_set_used_clusters(check, offset, s->header.table_size)) {
continue; /* skip an invalid table */
}
ret = qed_read_l2_table_sync(s, &check->request, offset);
if (ret) {
check->result->check_errors++;
last_error = ret;
continue;
}
num_invalid_l2 = qed_check_l2_table(check,
check->request.l2_table->table);
/* Write out fixed L2 table */
if (num_invalid_l2 > 0 && check->fix) {
ret = qed_write_l2_table_sync(s, &check->request, 0,
s->table_nelems, false);
if (ret) {
check->result->check_errors++;
last_error = ret;
continue;
}
}
}
/* Drop reference to final table */
qed_unref_l2_cache_entry(check->request.l2_table);
check->request.l2_table = NULL;
/* Write out fixed L1 table */
if (num_invalid_l1 > 0 && check->fix) {
ret = qed_write_l1_table_sync(s, 0, s->table_nelems);
if (ret) {
check->result->check_errors++;
last_error = ret;
}
}
return last_error;
}
/**
* Check for unreferenced (leaked) clusters
*/
static void qed_check_for_leaks(QEDCheck *check)
{
BDRVQEDState *s = check->s;
size_t i;
for (i = s->header.header_size; i < check->nclusters; i++) {
if (!qed_test_bit(check->used_clusters, i)) {
check->result->leaks++;
}
}
}
int qed_check(BDRVQEDState *s, BdrvCheckResult *result, bool fix)
{
QEDCheck check = {
.s = s,
.result = result,
.nclusters = qed_bytes_to_clusters(s, s->file_size),
.request = { .l2_table = NULL },
.fix = fix,
};
int ret;
check.used_clusters = qemu_mallocz(((check.nclusters + 31) / 32) *
sizeof(check.used_clusters[0]));
ret = qed_check_l1_table(&check, s->l1_table);
if (ret == 0) {
/* Only check for leaks if entire image was scanned successfully */
qed_check_for_leaks(&check);
}
qemu_free(check.used_clusters);
return ret;
}

View File

@@ -1,154 +0,0 @@
/*
* QEMU Enhanced Disk Format Cluster functions
*
* Copyright IBM, Corp. 2010
*
* Authors:
* Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU LGPL, version 2 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
#include "qed.h"
/**
* Count the number of contiguous data clusters
*
* @s: QED state
* @table: L2 table
* @index: First cluster index
* @n: Maximum number of clusters
* @offset: Set to first cluster offset
*
* This function scans tables for contiguous allocated or free clusters.
*/
static unsigned int qed_count_contiguous_clusters(BDRVQEDState *s,
QEDTable *table,
unsigned int index,
unsigned int n,
uint64_t *offset)
{
unsigned int end = MIN(index + n, s->table_nelems);
uint64_t last = table->offsets[index];
unsigned int i;
*offset = last;
for (i = index + 1; i < end; i++) {
if (last == 0) {
/* Counting free clusters */
if (table->offsets[i] != 0) {
break;
}
} else {
/* Counting allocated clusters */
if (table->offsets[i] != last + s->header.cluster_size) {
break;
}
last = table->offsets[i];
}
}
return i - index;
}
typedef struct {
BDRVQEDState *s;
uint64_t pos;
size_t len;
QEDRequest *request;
/* User callback */
QEDFindClusterFunc *cb;
void *opaque;
} QEDFindClusterCB;
static void qed_find_cluster_cb(void *opaque, int ret)
{
QEDFindClusterCB *find_cluster_cb = opaque;
BDRVQEDState *s = find_cluster_cb->s;
QEDRequest *request = find_cluster_cb->request;
uint64_t offset = 0;
size_t len = 0;
unsigned int index;
unsigned int n;
if (ret) {
goto out;
}
index = qed_l2_index(s, find_cluster_cb->pos);
n = qed_bytes_to_clusters(s,
qed_offset_into_cluster(s, find_cluster_cb->pos) +
find_cluster_cb->len);
n = qed_count_contiguous_clusters(s, request->l2_table->table,
index, n, &offset);
ret = offset ? QED_CLUSTER_FOUND : QED_CLUSTER_L2;
len = MIN(find_cluster_cb->len, n * s->header.cluster_size -
qed_offset_into_cluster(s, find_cluster_cb->pos));
if (offset && !qed_check_cluster_offset(s, offset)) {
ret = -EINVAL;
}
out:
find_cluster_cb->cb(find_cluster_cb->opaque, ret, offset, len);
qemu_free(find_cluster_cb);
}
/**
* Find the offset of a data cluster
*
* @s: QED state
* @request: L2 cache entry
* @pos: Byte position in device
* @len: Number of bytes
* @cb: Completion function
* @opaque: User data for completion function
*
* This function translates a position in the block device to an offset in the
* image file. It invokes the cb completion callback to report back the
* translated offset or unallocated range in the image file.
*
* If the L2 table exists, request->l2_table points to the L2 table cache entry
* and the caller must free the reference when they are finished. The cache
* entry is exposed in this way to avoid callers having to read the L2 table
* again later during request processing. If request->l2_table is non-NULL it
* will be unreferenced before taking on the new cache entry.
*/
void qed_find_cluster(BDRVQEDState *s, QEDRequest *request, uint64_t pos,
size_t len, QEDFindClusterFunc *cb, void *opaque)
{
QEDFindClusterCB *find_cluster_cb;
uint64_t l2_offset;
/* Limit length to L2 boundary. Requests are broken up at the L2 boundary
* so that a request acts on one L2 table at a time.
*/
len = MIN(len, (((pos >> s->l1_shift) + 1) << s->l1_shift) - pos);
l2_offset = s->l1_table->offsets[qed_l1_index(s, pos)];
if (!l2_offset) {
cb(opaque, QED_CLUSTER_L1, 0, len);
return;
}
if (!qed_check_table_offset(s, l2_offset)) {
cb(opaque, -EINVAL, 0, 0);
return;
}
find_cluster_cb = qemu_malloc(sizeof(*find_cluster_cb));
find_cluster_cb->s = s;
find_cluster_cb->pos = pos;
find_cluster_cb->len = len;
find_cluster_cb->cb = cb;
find_cluster_cb->opaque = opaque;
find_cluster_cb->request = request;
qed_read_l2_table(s, request, l2_offset,
qed_find_cluster_cb, find_cluster_cb);
}

View File

@@ -1,32 +0,0 @@
/*
* QEMU Enhanced Disk Format
*
* Copyright IBM, Corp. 2010
*
* Authors:
* Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
*
* This work is licensed under the terms of the GNU LGPL, version 2 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
#include "qed.h"
void *gencb_alloc(size_t len, BlockDriverCompletionFunc *cb, void *opaque)
{
GenericCB *gencb = qemu_malloc(len);
gencb->cb = cb;
gencb->opaque = opaque;
return gencb;
}
void gencb_complete(void *opaque, int ret)
{
GenericCB *gencb = opaque;
BlockDriverCompletionFunc *cb = gencb->cb;
void *user_opaque = gencb->opaque;
qemu_free(gencb);
cb(user_opaque, ret);
}

View File

@@ -1,173 +0,0 @@
/*
* QEMU Enhanced Disk Format L2 Cache
*
* Copyright IBM, Corp. 2010
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU LGPL, version 2 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
/*
* L2 table cache usage is as follows:
*
* An open image has one L2 table cache that is used to avoid accessing the
* image file for recently referenced L2 tables.
*
* Cluster offset lookup translates the logical offset within the block device
* to a cluster offset within the image file. This is done by indexing into
* the L1 and L2 tables which store cluster offsets. It is here where the L2
* table cache serves up recently referenced L2 tables.
*
* If there is a cache miss, that L2 table is read from the image file and
* committed to the cache. Subsequent accesses to that L2 table will be served
* from the cache until the table is evicted from the cache.
*
* L2 tables are also committed to the cache when new L2 tables are allocated
* in the image file. Since the L2 table cache is write-through, the new L2
* table is first written out to the image file and then committed to the
* cache.
*
* Multiple I/O requests may be using an L2 table cache entry at any given
* time. That means an entry may be in use across several requests and
* reference counting is needed to free the entry at the correct time. In
* particular, an entry evicted from the cache will only be freed once all
* references are dropped.
*
* An in-flight I/O request will hold a reference to a L2 table cache entry for
* the period during which it needs to access the L2 table. This includes
* cluster offset lookup, L2 table allocation, and L2 table update when a new
* data cluster has been allocated.
*
* An interesting case occurs when two requests need to access an L2 table that
* is not in the cache. Since the operation to read the table from the image
* file takes some time to complete, both requests may see a cache miss and
* start reading the L2 table from the image file. The first to finish will
* commit its L2 table into the cache. When the second tries to commit its
* table will be deleted in favor of the existing cache entry.
*/
#include "trace.h"
#include "qed.h"
/* Each L2 holds 2GB so this let's us fully cache a 100GB disk */
#define MAX_L2_CACHE_SIZE 50
/**
* Initialize the L2 cache
*/
void qed_init_l2_cache(L2TableCache *l2_cache)
{
QTAILQ_INIT(&l2_cache->entries);
l2_cache->n_entries = 0;
}
/**
* Free the L2 cache
*/
void qed_free_l2_cache(L2TableCache *l2_cache)
{
CachedL2Table *entry, *next_entry;
QTAILQ_FOREACH_SAFE(entry, &l2_cache->entries, node, next_entry) {
qemu_vfree(entry->table);
qemu_free(entry);
}
}
/**
* Allocate an uninitialized entry from the cache
*
* The returned entry has a reference count of 1 and is owned by the caller.
* The caller must allocate the actual table field for this entry and it must
* be freeable using qemu_vfree().
*/
CachedL2Table *qed_alloc_l2_cache_entry(L2TableCache *l2_cache)
{
CachedL2Table *entry;
entry = qemu_mallocz(sizeof(*entry));
entry->ref++;
trace_qed_alloc_l2_cache_entry(l2_cache, entry);
return entry;
}
/**
* Decrease an entry's reference count and free if necessary when the reference
* count drops to zero.
*/
void qed_unref_l2_cache_entry(CachedL2Table *entry)
{
if (!entry) {
return;
}
entry->ref--;
trace_qed_unref_l2_cache_entry(entry, entry->ref);
if (entry->ref == 0) {
qemu_vfree(entry->table);
qemu_free(entry);
}
}
/**
* Find an entry in the L2 cache. This may return NULL and it's up to the
* caller to satisfy the cache miss.
*
* For a cached entry, this function increases the reference count and returns
* the entry.
*/
CachedL2Table *qed_find_l2_cache_entry(L2TableCache *l2_cache, uint64_t offset)
{
CachedL2Table *entry;
QTAILQ_FOREACH(entry, &l2_cache->entries, node) {
if (entry->offset == offset) {
trace_qed_find_l2_cache_entry(l2_cache, entry, offset, entry->ref);
entry->ref++;
return entry;
}
}
return NULL;
}
/**
* Commit an L2 cache entry into the cache. This is meant to be used as part of
* the process to satisfy a cache miss. A caller would allocate an entry which
* is not actually in the L2 cache and then once the entry was valid and
* present on disk, the entry can be committed into the cache.
*
* Since the cache is write-through, it's important that this function is not
* called until the entry is present on disk and the L1 has been updated to
* point to the entry.
*
* N.B. This function steals a reference to the l2_table from the caller so the
* caller must obtain a new reference by issuing a call to
* qed_find_l2_cache_entry().
*/
void qed_commit_l2_cache_entry(L2TableCache *l2_cache, CachedL2Table *l2_table)
{
CachedL2Table *entry;
entry = qed_find_l2_cache_entry(l2_cache, l2_table->offset);
if (entry) {
qed_unref_l2_cache_entry(entry);
qed_unref_l2_cache_entry(l2_table);
return;
}
if (l2_cache->n_entries >= MAX_L2_CACHE_SIZE) {
entry = QTAILQ_FIRST(&l2_cache->entries);
QTAILQ_REMOVE(&l2_cache->entries, entry, node);
l2_cache->n_entries--;
qed_unref_l2_cache_entry(entry);
}
l2_cache->n_entries++;
QTAILQ_INSERT_TAIL(&l2_cache->entries, l2_table, node);
}

View File

@@ -1,319 +0,0 @@
/*
* QEMU Enhanced Disk Format Table I/O
*
* Copyright IBM, Corp. 2010
*
* Authors:
* Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU LGPL, version 2 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
#include "trace.h"
#include "qemu_socket.h" /* for EINPROGRESS on Windows */
#include "qed.h"
typedef struct {
GenericCB gencb;
BDRVQEDState *s;
QEDTable *table;
struct iovec iov;
QEMUIOVector qiov;
} QEDReadTableCB;
static void qed_read_table_cb(void *opaque, int ret)
{
QEDReadTableCB *read_table_cb = opaque;
QEDTable *table = read_table_cb->table;
int noffsets = read_table_cb->iov.iov_len / sizeof(uint64_t);
int i;
/* Handle I/O error */
if (ret) {
goto out;
}
/* Byteswap offsets */
for (i = 0; i < noffsets; i++) {
table->offsets[i] = le64_to_cpu(table->offsets[i]);
}
out:
/* Completion */
trace_qed_read_table_cb(read_table_cb->s, read_table_cb->table, ret);
gencb_complete(&read_table_cb->gencb, ret);
}
static void qed_read_table(BDRVQEDState *s, uint64_t offset, QEDTable *table,
BlockDriverCompletionFunc *cb, void *opaque)
{
QEDReadTableCB *read_table_cb = gencb_alloc(sizeof(*read_table_cb),
cb, opaque);
QEMUIOVector *qiov = &read_table_cb->qiov;
BlockDriverAIOCB *aiocb;
trace_qed_read_table(s, offset, table);
read_table_cb->s = s;
read_table_cb->table = table;
read_table_cb->iov.iov_base = table->offsets,
read_table_cb->iov.iov_len = s->header.cluster_size * s->header.table_size,
qemu_iovec_init_external(qiov, &read_table_cb->iov, 1);
aiocb = bdrv_aio_readv(s->bs->file, offset / BDRV_SECTOR_SIZE, qiov,
read_table_cb->iov.iov_len / BDRV_SECTOR_SIZE,
qed_read_table_cb, read_table_cb);
if (!aiocb) {
qed_read_table_cb(read_table_cb, -EIO);
}
}
typedef struct {
GenericCB gencb;
BDRVQEDState *s;
QEDTable *orig_table;
QEDTable *table;
bool flush; /* flush after write? */
struct iovec iov;
QEMUIOVector qiov;
} QEDWriteTableCB;
static void qed_write_table_cb(void *opaque, int ret)
{
QEDWriteTableCB *write_table_cb = opaque;
trace_qed_write_table_cb(write_table_cb->s,
write_table_cb->orig_table,
write_table_cb->flush,
ret);
if (ret) {
goto out;
}
if (write_table_cb->flush) {
/* We still need to flush first */
write_table_cb->flush = false;
bdrv_aio_flush(write_table_cb->s->bs, qed_write_table_cb,
write_table_cb);
return;
}
out:
qemu_vfree(write_table_cb->table);
gencb_complete(&write_table_cb->gencb, ret);
return;
}
/**
* Write out an updated part or all of a table
*
* @s: QED state
* @offset: Offset of table in image file, in bytes
* @table: Table
* @index: Index of first element
* @n: Number of elements
* @flush: Whether or not to sync to disk
* @cb: Completion function
* @opaque: Argument for completion function
*/
static void qed_write_table(BDRVQEDState *s, uint64_t offset, QEDTable *table,
unsigned int index, unsigned int n, bool flush,
BlockDriverCompletionFunc *cb, void *opaque)
{
QEDWriteTableCB *write_table_cb;
BlockDriverAIOCB *aiocb;
unsigned int sector_mask = BDRV_SECTOR_SIZE / sizeof(uint64_t) - 1;
unsigned int start, end, i;
size_t len_bytes;
trace_qed_write_table(s, offset, table, index, n);
/* Calculate indices of the first and one after last elements */
start = index & ~sector_mask;
end = (index + n + sector_mask) & ~sector_mask;
len_bytes = (end - start) * sizeof(uint64_t);
write_table_cb = gencb_alloc(sizeof(*write_table_cb), cb, opaque);
write_table_cb->s = s;
write_table_cb->orig_table = table;
write_table_cb->flush = flush;
write_table_cb->table = qemu_blockalign(s->bs, len_bytes);
write_table_cb->iov.iov_base = write_table_cb->table->offsets;
write_table_cb->iov.iov_len = len_bytes;
qemu_iovec_init_external(&write_table_cb->qiov, &write_table_cb->iov, 1);
/* Byteswap table */
for (i = start; i < end; i++) {
uint64_t le_offset = cpu_to_le64(table->offsets[i]);
write_table_cb->table->offsets[i - start] = le_offset;
}
/* Adjust for offset into table */
offset += start * sizeof(uint64_t);
aiocb = bdrv_aio_writev(s->bs->file, offset / BDRV_SECTOR_SIZE,
&write_table_cb->qiov,
write_table_cb->iov.iov_len / BDRV_SECTOR_SIZE,
qed_write_table_cb, write_table_cb);
if (!aiocb) {
qed_write_table_cb(write_table_cb, -EIO);
}
}
/**
* Propagate return value from async callback
*/
static void qed_sync_cb(void *opaque, int ret)
{
*(int *)opaque = ret;
}
int qed_read_l1_table_sync(BDRVQEDState *s)
{
int ret = -EINPROGRESS;
async_context_push();
qed_read_table(s, s->header.l1_table_offset,
s->l1_table, qed_sync_cb, &ret);
while (ret == -EINPROGRESS) {
qemu_aio_wait();
}
async_context_pop();
return ret;
}
void qed_write_l1_table(BDRVQEDState *s, unsigned int index, unsigned int n,
BlockDriverCompletionFunc *cb, void *opaque)
{
BLKDBG_EVENT(s->bs->file, BLKDBG_L1_UPDATE);
qed_write_table(s, s->header.l1_table_offset,
s->l1_table, index, n, false, cb, opaque);
}
int qed_write_l1_table_sync(BDRVQEDState *s, unsigned int index,
unsigned int n)
{
int ret = -EINPROGRESS;
async_context_push();
qed_write_l1_table(s, index, n, qed_sync_cb, &ret);
while (ret == -EINPROGRESS) {
qemu_aio_wait();
}
async_context_pop();
return ret;
}
typedef struct {
GenericCB gencb;
BDRVQEDState *s;
uint64_t l2_offset;
QEDRequest *request;
} QEDReadL2TableCB;
static void qed_read_l2_table_cb(void *opaque, int ret)
{
QEDReadL2TableCB *read_l2_table_cb = opaque;
QEDRequest *request = read_l2_table_cb->request;
BDRVQEDState *s = read_l2_table_cb->s;
CachedL2Table *l2_table = request->l2_table;
if (ret) {
/* can't trust loaded L2 table anymore */
qed_unref_l2_cache_entry(l2_table);
request->l2_table = NULL;
} else {
l2_table->offset = read_l2_table_cb->l2_offset;
qed_commit_l2_cache_entry(&s->l2_cache, l2_table);
/* This is guaranteed to succeed because we just committed the entry
* to the cache.
*/
request->l2_table = qed_find_l2_cache_entry(&s->l2_cache,
l2_table->offset);
assert(request->l2_table != NULL);
}
gencb_complete(&read_l2_table_cb->gencb, ret);
}
void qed_read_l2_table(BDRVQEDState *s, QEDRequest *request, uint64_t offset,
BlockDriverCompletionFunc *cb, void *opaque)
{
QEDReadL2TableCB *read_l2_table_cb;
qed_unref_l2_cache_entry(request->l2_table);
/* Check for cached L2 entry */
request->l2_table = qed_find_l2_cache_entry(&s->l2_cache, offset);
if (request->l2_table) {
cb(opaque, 0);
return;
}
request->l2_table = qed_alloc_l2_cache_entry(&s->l2_cache);
request->l2_table->table = qed_alloc_table(s);
read_l2_table_cb = gencb_alloc(sizeof(*read_l2_table_cb), cb, opaque);
read_l2_table_cb->s = s;
read_l2_table_cb->l2_offset = offset;
read_l2_table_cb->request = request;
BLKDBG_EVENT(s->bs->file, BLKDBG_L2_LOAD);
qed_read_table(s, offset, request->l2_table->table,
qed_read_l2_table_cb, read_l2_table_cb);
}
int qed_read_l2_table_sync(BDRVQEDState *s, QEDRequest *request, uint64_t offset)
{
int ret = -EINPROGRESS;
async_context_push();
qed_read_l2_table(s, request, offset, qed_sync_cb, &ret);
while (ret == -EINPROGRESS) {
qemu_aio_wait();
}
async_context_pop();
return ret;
}
void qed_write_l2_table(BDRVQEDState *s, QEDRequest *request,
unsigned int index, unsigned int n, bool flush,
BlockDriverCompletionFunc *cb, void *opaque)
{
BLKDBG_EVENT(s->bs->file, BLKDBG_L2_UPDATE);
qed_write_table(s, request->l2_table->offset,
request->l2_table->table, index, n, flush, cb, opaque);
}
int qed_write_l2_table_sync(BDRVQEDState *s, QEDRequest *request,
unsigned int index, unsigned int n, bool flush)
{
int ret = -EINPROGRESS;
async_context_push();
qed_write_l2_table(s, request, index, n, flush, qed_sync_cb, &ret);
while (ret == -EINPROGRESS) {
qemu_aio_wait();
}
async_context_pop();
return ret;
}

File diff suppressed because it is too large Load Diff

View File

@@ -1,301 +0,0 @@
/*
* QEMU Enhanced Disk Format
*
* Copyright IBM, Corp. 2010
*
* Authors:
* Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU LGPL, version 2 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
#ifndef BLOCK_QED_H
#define BLOCK_QED_H
#include "block_int.h"
/* The layout of a QED file is as follows:
*
* +--------+----------+----------+----------+-----+
* | header | L1 table | cluster0 | cluster1 | ... |
* +--------+----------+----------+----------+-----+
*
* There is a 2-level pagetable for cluster allocation:
*
* +----------+
* | L1 table |
* +----------+
* ,------' | '------.
* +----------+ | +----------+
* | L2 table | ... | L2 table |
* +----------+ +----------+
* ,------' | '------.
* +----------+ | +----------+
* | Data | ... | Data |
* +----------+ +----------+
*
* The L1 table is fixed size and always present. L2 tables are allocated on
* demand. The L1 table size determines the maximum possible image size; it
* can be influenced using the cluster_size and table_size values.
*
* All fields are little-endian on disk.
*/
enum {
QED_MAGIC = 'Q' | 'E' << 8 | 'D' << 16 | '\0' << 24,
/* The image supports a backing file */
QED_F_BACKING_FILE = 0x01,
/* The image needs a consistency check before use */
QED_F_NEED_CHECK = 0x02,
/* The backing file format must not be probed, treat as raw image */
QED_F_BACKING_FORMAT_NO_PROBE = 0x04,
/* Feature bits must be used when the on-disk format changes */
QED_FEATURE_MASK = QED_F_BACKING_FILE | /* supported feature bits */
QED_F_NEED_CHECK |
QED_F_BACKING_FORMAT_NO_PROBE,
QED_COMPAT_FEATURE_MASK = 0, /* supported compat feature bits */
QED_AUTOCLEAR_FEATURE_MASK = 0, /* supported autoclear feature bits */
/* Data is stored in groups of sectors called clusters. Cluster size must
* be large to avoid keeping too much metadata. I/O requests that have
* sub-cluster size will require read-modify-write.
*/
QED_MIN_CLUSTER_SIZE = 4 * 1024, /* in bytes */
QED_MAX_CLUSTER_SIZE = 64 * 1024 * 1024,
QED_DEFAULT_CLUSTER_SIZE = 64 * 1024,
/* Allocated clusters are tracked using a 2-level pagetable. Table size is
* a multiple of clusters so large maximum image sizes can be supported
* without jacking up the cluster size too much.
*/
QED_MIN_TABLE_SIZE = 1, /* in clusters */
QED_MAX_TABLE_SIZE = 16,
QED_DEFAULT_TABLE_SIZE = 4,
};
typedef struct {
uint32_t magic; /* QED\0 */
uint32_t cluster_size; /* in bytes */
uint32_t table_size; /* for L1 and L2 tables, in clusters */
uint32_t header_size; /* in clusters */
uint64_t features; /* format feature bits */
uint64_t compat_features; /* compatible feature bits */
uint64_t autoclear_features; /* self-resetting feature bits */
uint64_t l1_table_offset; /* in bytes */
uint64_t image_size; /* total logical image size, in bytes */
/* if (features & QED_F_BACKING_FILE) */
uint32_t backing_filename_offset; /* in bytes from start of header */
uint32_t backing_filename_size; /* in bytes */
} QEDHeader;
typedef struct {
uint64_t offsets[0]; /* in bytes */
} QEDTable;
/* The L2 cache is a simple write-through cache for L2 structures */
typedef struct CachedL2Table {
QEDTable *table;
uint64_t offset; /* offset=0 indicates an invalidate entry */
QTAILQ_ENTRY(CachedL2Table) node;
int ref;
} CachedL2Table;
typedef struct {
QTAILQ_HEAD(, CachedL2Table) entries;
unsigned int n_entries;
} L2TableCache;
typedef struct QEDRequest {
CachedL2Table *l2_table;
} QEDRequest;
typedef struct QEDAIOCB {
BlockDriverAIOCB common;
QEMUBH *bh;
int bh_ret; /* final return status for completion bh */
QSIMPLEQ_ENTRY(QEDAIOCB) next; /* next request */
bool is_write; /* false - read, true - write */
bool *finished; /* signal for cancel completion */
uint64_t end_pos; /* request end on block device, in bytes */
/* User scatter-gather list */
QEMUIOVector *qiov;
size_t qiov_offset; /* byte count already processed */
/* Current cluster scatter-gather list */
QEMUIOVector cur_qiov;
uint64_t cur_pos; /* position on block device, in bytes */
uint64_t cur_cluster; /* cluster offset in image file */
unsigned int cur_nclusters; /* number of clusters being accessed */
int find_cluster_ret; /* used for L1/L2 update */
QEDRequest request;
} QEDAIOCB;
typedef struct {
BlockDriverState *bs; /* device */
uint64_t file_size; /* length of image file, in bytes */
QEDHeader header; /* always cpu-endian */
QEDTable *l1_table;
L2TableCache l2_cache; /* l2 table cache */
uint32_t table_nelems;
uint32_t l1_shift;
uint32_t l2_shift;
uint32_t l2_mask;
/* Allocating write request queue */
QSIMPLEQ_HEAD(, QEDAIOCB) allocating_write_reqs;
} BDRVQEDState;
enum {
QED_CLUSTER_FOUND, /* cluster found */
QED_CLUSTER_L2, /* cluster missing in L2 */
QED_CLUSTER_L1, /* cluster missing in L1 */
};
/**
* qed_find_cluster() completion callback
*
* @opaque: User data for completion callback
* @ret: QED_CLUSTER_FOUND Success
* QED_CLUSTER_L2 Data cluster unallocated in L2
* QED_CLUSTER_L1 L2 unallocated in L1
* -errno POSIX error occurred
* @offset: Data cluster offset
* @len: Contiguous bytes starting from cluster offset
*
* This function is invoked when qed_find_cluster() completes.
*
* On success ret is QED_CLUSTER_FOUND and offset/len are a contiguous range
* in the image file.
*
* On failure ret is QED_CLUSTER_L2 or QED_CLUSTER_L1 for missing L2 or L1
* table offset, respectively. len is number of contiguous unallocated bytes.
*/
typedef void QEDFindClusterFunc(void *opaque, int ret, uint64_t offset, size_t len);
/**
* Generic callback for chaining async callbacks
*/
typedef struct {
BlockDriverCompletionFunc *cb;
void *opaque;
} GenericCB;
void *gencb_alloc(size_t len, BlockDriverCompletionFunc *cb, void *opaque);
void gencb_complete(void *opaque, int ret);
/**
* L2 cache functions
*/
void qed_init_l2_cache(L2TableCache *l2_cache);
void qed_free_l2_cache(L2TableCache *l2_cache);
CachedL2Table *qed_alloc_l2_cache_entry(L2TableCache *l2_cache);
void qed_unref_l2_cache_entry(CachedL2Table *entry);
CachedL2Table *qed_find_l2_cache_entry(L2TableCache *l2_cache, uint64_t offset);
void qed_commit_l2_cache_entry(L2TableCache *l2_cache, CachedL2Table *l2_table);
/**
* Table I/O functions
*/
int qed_read_l1_table_sync(BDRVQEDState *s);
void qed_write_l1_table(BDRVQEDState *s, unsigned int index, unsigned int n,
BlockDriverCompletionFunc *cb, void *opaque);
int qed_write_l1_table_sync(BDRVQEDState *s, unsigned int index,
unsigned int n);
int qed_read_l2_table_sync(BDRVQEDState *s, QEDRequest *request,
uint64_t offset);
void qed_read_l2_table(BDRVQEDState *s, QEDRequest *request, uint64_t offset,
BlockDriverCompletionFunc *cb, void *opaque);
void qed_write_l2_table(BDRVQEDState *s, QEDRequest *request,
unsigned int index, unsigned int n, bool flush,
BlockDriverCompletionFunc *cb, void *opaque);
int qed_write_l2_table_sync(BDRVQEDState *s, QEDRequest *request,
unsigned int index, unsigned int n, bool flush);
/**
* Cluster functions
*/
void qed_find_cluster(BDRVQEDState *s, QEDRequest *request, uint64_t pos,
size_t len, QEDFindClusterFunc *cb, void *opaque);
/**
* Consistency check
*/
int qed_check(BDRVQEDState *s, BdrvCheckResult *result, bool fix);
QEDTable *qed_alloc_table(BDRVQEDState *s);
/**
* Round down to the start of a cluster
*/
static inline uint64_t qed_start_of_cluster(BDRVQEDState *s, uint64_t offset)
{
return offset & ~(uint64_t)(s->header.cluster_size - 1);
}
static inline uint64_t qed_offset_into_cluster(BDRVQEDState *s, uint64_t offset)
{
return offset & (s->header.cluster_size - 1);
}
static inline unsigned int qed_bytes_to_clusters(BDRVQEDState *s, size_t bytes)
{
return qed_start_of_cluster(s, bytes + (s->header.cluster_size - 1)) /
(s->header.cluster_size - 1);
}
static inline unsigned int qed_l1_index(BDRVQEDState *s, uint64_t pos)
{
return pos >> s->l1_shift;
}
static inline unsigned int qed_l2_index(BDRVQEDState *s, uint64_t pos)
{
return (pos >> s->l2_shift) & s->l2_mask;
}
/**
* Test if a cluster offset is valid
*/
static inline bool qed_check_cluster_offset(BDRVQEDState *s, uint64_t offset)
{
uint64_t header_size = (uint64_t)s->header.header_size *
s->header.cluster_size;
if (offset & (s->header.cluster_size - 1)) {
return false;
}
return offset >= header_size && offset < s->file_size;
}
/**
* Test if a table offset is valid
*/
static inline bool qed_check_table_offset(BDRVQEDState *s, uint64_t offset)
{
uint64_t end_offset = offset + (s->header.table_size - 1) *
s->header.cluster_size;
/* Overflow check */
if (end_offset <= offset) {
return false;
}
return qed_check_cluster_offset(s, offset) &&
qed_check_cluster_offset(s, end_offset);
}
#endif /* BLOCK_QED_H */

View File

@@ -1,43 +0,0 @@
/*
* QEMU Posix block I/O backend AIO support
*
* Copyright IBM, Corp. 2008
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#ifndef QEMU_RAW_POSIX_AIO_H
#define QEMU_RAW_POSIX_AIO_H
/* AIO request types */
#define QEMU_AIO_READ 0x0001
#define QEMU_AIO_WRITE 0x0002
#define QEMU_AIO_IOCTL 0x0004
#define QEMU_AIO_FLUSH 0x0008
#define QEMU_AIO_TYPE_MASK \
(QEMU_AIO_READ|QEMU_AIO_WRITE|QEMU_AIO_IOCTL|QEMU_AIO_FLUSH)
/* AIO flags */
#define QEMU_AIO_MISALIGNED 0x1000
/* posix-aio-compat.c - thread pool based implementation */
int paio_init(void);
BlockDriverAIOCB *paio_submit(BlockDriverState *bs, int fd,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque, int type);
BlockDriverAIOCB *paio_ioctl(BlockDriverState *bs, int fd,
unsigned long int req, void *buf,
BlockDriverCompletionFunc *cb, void *opaque);
/* linux-aio.c - Linux native implementation */
void *laio_init(void);
BlockDriverAIOCB *laio_submit(BlockDriverState *bs, void *aio_ctx, int fd,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque, int type);
#endif /* QEMU_RAW_POSIX_AIO_H */

File diff suppressed because it is too large Load Diff

View File

@@ -1,156 +0,0 @@
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
static int raw_open(BlockDriverState *bs, int flags)
{
bs->sg = bs->file->sg;
return 0;
}
static int raw_read(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors)
{
return bdrv_read(bs->file, sector_num, buf, nb_sectors);
}
static int raw_write(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors)
{
return bdrv_write(bs->file, sector_num, buf, nb_sectors);
}
static BlockDriverAIOCB *raw_aio_readv(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
return bdrv_aio_readv(bs->file, sector_num, qiov, nb_sectors, cb, opaque);
}
static BlockDriverAIOCB *raw_aio_writev(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
return bdrv_aio_writev(bs->file, sector_num, qiov, nb_sectors, cb, opaque);
}
static void raw_close(BlockDriverState *bs)
{
}
static int raw_flush(BlockDriverState *bs)
{
return bdrv_flush(bs->file);
}
static BlockDriverAIOCB *raw_aio_flush(BlockDriverState *bs,
BlockDriverCompletionFunc *cb, void *opaque)
{
return bdrv_aio_flush(bs->file, cb, opaque);
}
static int64_t raw_getlength(BlockDriverState *bs)
{
return bdrv_getlength(bs->file);
}
static int raw_truncate(BlockDriverState *bs, int64_t offset)
{
return bdrv_truncate(bs->file, offset);
}
static int raw_probe(const uint8_t *buf, int buf_size, const char *filename)
{
return 1; /* everything can be opened as raw image */
}
static int raw_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
{
return bdrv_discard(bs->file, sector_num, nb_sectors);
}
static int raw_is_inserted(BlockDriverState *bs)
{
return bdrv_is_inserted(bs->file);
}
static int raw_eject(BlockDriverState *bs, int eject_flag)
{
return bdrv_eject(bs->file, eject_flag);
}
static int raw_set_locked(BlockDriverState *bs, int locked)
{
bdrv_set_locked(bs->file, locked);
return 0;
}
static int raw_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
{
return bdrv_ioctl(bs->file, req, buf);
}
static BlockDriverAIOCB *raw_aio_ioctl(BlockDriverState *bs,
unsigned long int req, void *buf,
BlockDriverCompletionFunc *cb, void *opaque)
{
return bdrv_aio_ioctl(bs->file, req, buf, cb, opaque);
}
static int raw_create(const char *filename, QEMUOptionParameter *options)
{
return bdrv_create_file(filename, options);
}
static QEMUOptionParameter raw_create_options[] = {
{
.name = BLOCK_OPT_SIZE,
.type = OPT_SIZE,
.help = "Virtual disk size"
},
{ NULL }
};
static int raw_has_zero_init(BlockDriverState *bs)
{
return bdrv_has_zero_init(bs->file);
}
static BlockDriver bdrv_raw = {
.format_name = "raw",
/* It's really 0, but we need to make qemu_malloc() happy */
.instance_size = 1,
.bdrv_open = raw_open,
.bdrv_close = raw_close,
.bdrv_read = raw_read,
.bdrv_write = raw_write,
.bdrv_flush = raw_flush,
.bdrv_probe = raw_probe,
.bdrv_getlength = raw_getlength,
.bdrv_truncate = raw_truncate,
.bdrv_aio_readv = raw_aio_readv,
.bdrv_aio_writev = raw_aio_writev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_discard = raw_discard,
.bdrv_is_inserted = raw_is_inserted,
.bdrv_eject = raw_eject,
.bdrv_set_locked = raw_set_locked,
.bdrv_ioctl = raw_ioctl,
.bdrv_aio_ioctl = raw_aio_ioctl,
.bdrv_create = raw_create,
.create_options = raw_create_options,
.bdrv_has_zero_init = raw_has_zero_init,
};
static void bdrv_raw_init(void)
{
bdrv_register(&bdrv_raw);
}
block_init(bdrv_raw_init);

File diff suppressed because it is too large Load Diff

View File

@@ -1,71 +0,0 @@
/*
* Ceph - scalable distributed file system
*
* Copyright (C) 2004-2010 Sage Weil <sage@newdream.net>
*
* This is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1, as published by the Free Software
* Foundation. See file COPYING.LIB.
*
*/
#ifndef CEPH_RBD_TYPES_H
#define CEPH_RBD_TYPES_H
/*
* rbd image 'foo' consists of objects
* foo.rbd - image metadata
* foo.00000000
* foo.00000001
* ... - data
*/
#define RBD_SUFFIX ".rbd"
#define RBD_DIRECTORY "rbd_directory"
#define RBD_INFO "rbd_info"
#define RBD_DEFAULT_OBJ_ORDER 22 /* 4MB */
#define RBD_MAX_OBJ_NAME_SIZE 96
#define RBD_MAX_BLOCK_NAME_SIZE 24
#define RBD_MAX_SEG_NAME_SIZE 128
#define RBD_COMP_NONE 0
#define RBD_CRYPT_NONE 0
#define RBD_HEADER_TEXT "<<< Rados Block Device Image >>>\n"
#define RBD_HEADER_SIGNATURE "RBD"
#define RBD_HEADER_VERSION "001.005"
struct rbd_info {
uint64_t max_id;
} __attribute__ ((packed));
struct rbd_obj_snap_ondisk {
uint64_t id;
uint64_t image_size;
} __attribute__((packed));
struct rbd_obj_header_ondisk {
char text[40];
char block_name[RBD_MAX_BLOCK_NAME_SIZE];
char signature[4];
char version[8];
struct {
uint8_t order;
uint8_t crypt_type;
uint8_t comp_type;
uint8_t unused;
} __attribute__((packed)) options;
uint64_t image_size;
uint64_t snap_seq;
uint32_t snap_count;
uint32_t reserved;
uint64_t snap_names_len;
struct rbd_obj_snap_ondisk snaps[0];
} __attribute__((packed));
#endif

File diff suppressed because it is too large Load Diff

View File

@@ -1,961 +0,0 @@
/*
* Block driver for the Virtual Disk Image (VDI) format
*
* Copyright (c) 2009 Stefan Weil
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) version 3 or any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Reference:
* http://forums.virtualbox.org/viewtopic.php?t=8046
*
* This driver supports create / read / write operations on VDI images.
*
* Todo (see also TODO in code):
*
* Some features like snapshots are still missing.
*
* Deallocation of zero-filled blocks and shrinking images are missing, too
* (might be added to common block layer).
*
* Allocation of blocks could be optimized (less writes to block map and
* header).
*
* Read and write of adjacents blocks could be done in one operation
* (current code uses one operation per block (1 MiB).
*
* The code is not thread safe (missing locks for changes in header and
* block table, no problem with current QEMU).
*
* Hints:
*
* Blocks (VDI documentation) correspond to clusters (QEMU).
* QEMU's backing files could be implemented using VDI snapshot files (TODO).
* VDI snapshot files may also contain the complete machine state.
* Maybe this machine state can be converted to QEMU PC machine snapshot data.
*
* The driver keeps a block cache (little endian entries) in memory.
* For the standard block size (1 MiB), a 1 TiB disk will use 4 MiB RAM,
* so this seems to be reasonable.
*/
#include "qemu-common.h"
#include "block_int.h"
#include "module.h"
#if defined(CONFIG_UUID)
#include <uuid/uuid.h>
#else
/* TODO: move uuid emulation to some central place in QEMU. */
#include "sysemu.h" /* UUID_FMT */
typedef unsigned char uuid_t[16];
void uuid_generate(uuid_t out);
int uuid_is_null(const uuid_t uu);
void uuid_unparse(const uuid_t uu, char *out);
#endif
/* Code configuration options. */
/* Enable debug messages. */
//~ #define CONFIG_VDI_DEBUG
/* Support write operations on VDI images. */
#define CONFIG_VDI_WRITE
/* Support non-standard block (cluster) size. This is untested.
* Maybe it will be needed for very large images.
*/
//~ #define CONFIG_VDI_BLOCK_SIZE
/* Support static (fixed, pre-allocated) images. */
#define CONFIG_VDI_STATIC_IMAGE
/* Command line option for static images. */
#define BLOCK_OPT_STATIC "static"
#define KiB 1024
#define MiB (KiB * KiB)
#define SECTOR_SIZE 512
#if defined(CONFIG_VDI_DEBUG)
#define logout(fmt, ...) \
fprintf(stderr, "vdi\t%-24s" fmt, __func__, ##__VA_ARGS__)
#else
#define logout(fmt, ...) ((void)0)
#endif
/* Image signature. */
#define VDI_SIGNATURE 0xbeda107f
/* Image version. */
#define VDI_VERSION_1_1 0x00010001
/* Image type. */
#define VDI_TYPE_DYNAMIC 1
#define VDI_TYPE_STATIC 2
/* Innotek / SUN images use these strings in header.text:
* "<<< innotek VirtualBox Disk Image >>>\n"
* "<<< Sun xVM VirtualBox Disk Image >>>\n"
* "<<< Sun VirtualBox Disk Image >>>\n"
* The value does not matter, so QEMU created images use a different text.
*/
#define VDI_TEXT "<<< QEMU VM Virtual Disk Image >>>\n"
/* Unallocated blocks use this index (no need to convert endianess). */
#define VDI_UNALLOCATED UINT32_MAX
#if !defined(CONFIG_UUID)
void uuid_generate(uuid_t out)
{
memset(out, 0, sizeof(uuid_t));
}
int uuid_is_null(const uuid_t uu)
{
uuid_t null_uuid = { 0 };
return memcmp(uu, null_uuid, sizeof(uuid_t)) == 0;
}
void uuid_unparse(const uuid_t uu, char *out)
{
snprintf(out, 37, UUID_FMT,
uu[0], uu[1], uu[2], uu[3], uu[4], uu[5], uu[6], uu[7],
uu[8], uu[9], uu[10], uu[11], uu[12], uu[13], uu[14], uu[15]);
}
#endif
typedef struct {
BlockDriverAIOCB common;
int64_t sector_num;
QEMUIOVector *qiov;
uint8_t *buf;
/* Total number of sectors. */
int nb_sectors;
/* Number of sectors for current AIO. */
int n_sectors;
/* New allocated block map entry. */
uint32_t bmap_first;
uint32_t bmap_last;
/* Buffer for new allocated block. */
void *block_buffer;
void *orig_buf;
int header_modified;
BlockDriverAIOCB *hd_aiocb;
struct iovec hd_iov;
QEMUIOVector hd_qiov;
QEMUBH *bh;
} VdiAIOCB;
typedef struct {
char text[0x40];
uint32_t signature;
uint32_t version;
uint32_t header_size;
uint32_t image_type;
uint32_t image_flags;
char description[256];
uint32_t offset_bmap;
uint32_t offset_data;
uint32_t cylinders; /* disk geometry, unused here */
uint32_t heads; /* disk geometry, unused here */
uint32_t sectors; /* disk geometry, unused here */
uint32_t sector_size;
uint32_t unused1;
uint64_t disk_size;
uint32_t block_size;
uint32_t block_extra; /* unused here */
uint32_t blocks_in_image;
uint32_t blocks_allocated;
uuid_t uuid_image;
uuid_t uuid_last_snap;
uuid_t uuid_link;
uuid_t uuid_parent;
uint64_t unused2[7];
} VdiHeader;
typedef struct {
/* The block map entries are little endian (even in memory). */
uint32_t *bmap;
/* Size of block (bytes). */
uint32_t block_size;
/* Size of block (sectors). */
uint32_t block_sectors;
/* First sector of block map. */
uint32_t bmap_sector;
/* VDI header (converted to host endianess). */
VdiHeader header;
} BDRVVdiState;
/* Change UUID from little endian (IPRT = VirtualBox format) to big endian
* format (network byte order, standard, see RFC 4122) and vice versa.
*/
static void uuid_convert(uuid_t uuid)
{
bswap32s((uint32_t *)&uuid[0]);
bswap16s((uint16_t *)&uuid[4]);
bswap16s((uint16_t *)&uuid[6]);
}
static void vdi_header_to_cpu(VdiHeader *header)
{
le32_to_cpus(&header->signature);
le32_to_cpus(&header->version);
le32_to_cpus(&header->header_size);
le32_to_cpus(&header->image_type);
le32_to_cpus(&header->image_flags);
le32_to_cpus(&header->offset_bmap);
le32_to_cpus(&header->offset_data);
le32_to_cpus(&header->cylinders);
le32_to_cpus(&header->heads);
le32_to_cpus(&header->sectors);
le32_to_cpus(&header->sector_size);
le64_to_cpus(&header->disk_size);
le32_to_cpus(&header->block_size);
le32_to_cpus(&header->block_extra);
le32_to_cpus(&header->blocks_in_image);
le32_to_cpus(&header->blocks_allocated);
uuid_convert(header->uuid_image);
uuid_convert(header->uuid_last_snap);
uuid_convert(header->uuid_link);
uuid_convert(header->uuid_parent);
}
static void vdi_header_to_le(VdiHeader *header)
{
cpu_to_le32s(&header->signature);
cpu_to_le32s(&header->version);
cpu_to_le32s(&header->header_size);
cpu_to_le32s(&header->image_type);
cpu_to_le32s(&header->image_flags);
cpu_to_le32s(&header->offset_bmap);
cpu_to_le32s(&header->offset_data);
cpu_to_le32s(&header->cylinders);
cpu_to_le32s(&header->heads);
cpu_to_le32s(&header->sectors);
cpu_to_le32s(&header->sector_size);
cpu_to_le64s(&header->disk_size);
cpu_to_le32s(&header->block_size);
cpu_to_le32s(&header->block_extra);
cpu_to_le32s(&header->blocks_in_image);
cpu_to_le32s(&header->blocks_allocated);
cpu_to_le32s(&header->blocks_allocated);
uuid_convert(header->uuid_image);
uuid_convert(header->uuid_last_snap);
uuid_convert(header->uuid_link);
uuid_convert(header->uuid_parent);
}
#if defined(CONFIG_VDI_DEBUG)
static void vdi_header_print(VdiHeader *header)
{
char uuid[37];
logout("text %s", header->text);
logout("signature 0x%04x\n", header->signature);
logout("header size 0x%04x\n", header->header_size);
logout("image type 0x%04x\n", header->image_type);
logout("image flags 0x%04x\n", header->image_flags);
logout("description %s\n", header->description);
logout("offset bmap 0x%04x\n", header->offset_bmap);
logout("offset data 0x%04x\n", header->offset_data);
logout("cylinders 0x%04x\n", header->cylinders);
logout("heads 0x%04x\n", header->heads);
logout("sectors 0x%04x\n", header->sectors);
logout("sector size 0x%04x\n", header->sector_size);
logout("image size 0x%" PRIx64 " B (%" PRIu64 " MiB)\n",
header->disk_size, header->disk_size / MiB);
logout("block size 0x%04x\n", header->block_size);
logout("block extra 0x%04x\n", header->block_extra);
logout("blocks tot. 0x%04x\n", header->blocks_in_image);
logout("blocks all. 0x%04x\n", header->blocks_allocated);
uuid_unparse(header->uuid_image, uuid);
logout("uuid image %s\n", uuid);
uuid_unparse(header->uuid_last_snap, uuid);
logout("uuid snap %s\n", uuid);
uuid_unparse(header->uuid_link, uuid);
logout("uuid link %s\n", uuid);
uuid_unparse(header->uuid_parent, uuid);
logout("uuid parent %s\n", uuid);
}
#endif
static int vdi_check(BlockDriverState *bs, BdrvCheckResult *res)
{
/* TODO: additional checks possible. */
BDRVVdiState *s = (BDRVVdiState *)bs->opaque;
uint32_t blocks_allocated = 0;
uint32_t block;
uint32_t *bmap;
logout("\n");
bmap = qemu_malloc(s->header.blocks_in_image * sizeof(uint32_t));
memset(bmap, 0xff, s->header.blocks_in_image * sizeof(uint32_t));
/* Check block map and value of blocks_allocated. */
for (block = 0; block < s->header.blocks_in_image; block++) {
uint32_t bmap_entry = le32_to_cpu(s->bmap[block]);
if (bmap_entry != VDI_UNALLOCATED) {
if (bmap_entry < s->header.blocks_in_image) {
blocks_allocated++;
if (bmap[bmap_entry] == VDI_UNALLOCATED) {
bmap[bmap_entry] = bmap_entry;
} else {
fprintf(stderr, "ERROR: block index %" PRIu32
" also used by %" PRIu32 "\n", bmap[bmap_entry], bmap_entry);
res->corruptions++;
}
} else {
fprintf(stderr, "ERROR: block index %" PRIu32
" too large, is %" PRIu32 "\n", block, bmap_entry);
res->corruptions++;
}
}
}
if (blocks_allocated != s->header.blocks_allocated) {
fprintf(stderr, "ERROR: allocated blocks mismatch, is %" PRIu32
", should be %" PRIu32 "\n",
blocks_allocated, s->header.blocks_allocated);
res->corruptions++;
}
qemu_free(bmap);
return 0;
}
static int vdi_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
{
/* TODO: vdi_get_info would be needed for machine snapshots.
vm_state_offset is still missing. */
BDRVVdiState *s = (BDRVVdiState *)bs->opaque;
logout("\n");
bdi->cluster_size = s->block_size;
bdi->vm_state_offset = 0;
return 0;
}
static int vdi_make_empty(BlockDriverState *bs)
{
/* TODO: missing code. */
logout("\n");
/* The return value for missing code must be 0, see block.c. */
return 0;
}
static int vdi_probe(const uint8_t *buf, int buf_size, const char *filename)
{
const VdiHeader *header = (const VdiHeader *)buf;
int result = 0;
logout("\n");
if (buf_size < sizeof(*header)) {
/* Header too small, no VDI. */
} else if (le32_to_cpu(header->signature) == VDI_SIGNATURE) {
result = 100;
}
if (result == 0) {
logout("no vdi image\n");
} else {
logout("%s", header->text);
}
return result;
}
static int vdi_open(BlockDriverState *bs, int flags)
{
BDRVVdiState *s = bs->opaque;
VdiHeader header;
size_t bmap_size;
logout("\n");
if (bdrv_read(bs->file, 0, (uint8_t *)&header, 1) < 0) {
goto fail;
}
vdi_header_to_cpu(&header);
#if defined(CONFIG_VDI_DEBUG)
vdi_header_print(&header);
#endif
if (header.disk_size % SECTOR_SIZE != 0) {
/* 'VBoxManage convertfromraw' can create images with odd disk sizes.
We accept them but round the disk size to the next multiple of
SECTOR_SIZE. */
logout("odd disk size %" PRIu64 " B, round up\n", header.disk_size);
header.disk_size += SECTOR_SIZE - 1;
header.disk_size &= ~(SECTOR_SIZE - 1);
}
if (header.version != VDI_VERSION_1_1) {
logout("unsupported version %u.%u\n",
header.version >> 16, header.version & 0xffff);
goto fail;
} else if (header.offset_bmap % SECTOR_SIZE != 0) {
/* We only support block maps which start on a sector boundary. */
logout("unsupported block map offset 0x%x B\n", header.offset_bmap);
goto fail;
} else if (header.offset_data % SECTOR_SIZE != 0) {
/* We only support data blocks which start on a sector boundary. */
logout("unsupported data offset 0x%x B\n", header.offset_data);
goto fail;
} else if (header.sector_size != SECTOR_SIZE) {
logout("unsupported sector size %u B\n", header.sector_size);
goto fail;
} else if (header.block_size != 1 * MiB) {
logout("unsupported block size %u B\n", header.block_size);
goto fail;
} else if (header.disk_size >
(uint64_t)header.blocks_in_image * header.block_size) {
logout("unsupported disk size %" PRIu64 " B\n", header.disk_size);
goto fail;
} else if (!uuid_is_null(header.uuid_link)) {
logout("link uuid != 0, unsupported\n");
goto fail;
} else if (!uuid_is_null(header.uuid_parent)) {
logout("parent uuid != 0, unsupported\n");
goto fail;
}
bs->total_sectors = header.disk_size / SECTOR_SIZE;
s->block_size = header.block_size;
s->block_sectors = header.block_size / SECTOR_SIZE;
s->bmap_sector = header.offset_bmap / SECTOR_SIZE;
s->header = header;
bmap_size = header.blocks_in_image * sizeof(uint32_t);
bmap_size = (bmap_size + SECTOR_SIZE - 1) / SECTOR_SIZE;
if (bmap_size > 0) {
s->bmap = qemu_malloc(bmap_size * SECTOR_SIZE);
}
if (bdrv_read(bs->file, s->bmap_sector, (uint8_t *)s->bmap, bmap_size) < 0) {
goto fail_free_bmap;
}
return 0;
fail_free_bmap:
qemu_free(s->bmap);
fail:
return -1;
}
static int vdi_is_allocated(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, int *pnum)
{
/* TODO: Check for too large sector_num (in bdrv_is_allocated or here). */
BDRVVdiState *s = (BDRVVdiState *)bs->opaque;
size_t bmap_index = sector_num / s->block_sectors;
size_t sector_in_block = sector_num % s->block_sectors;
int n_sectors = s->block_sectors - sector_in_block;
uint32_t bmap_entry = le32_to_cpu(s->bmap[bmap_index]);
logout("%p, %" PRId64 ", %d, %p\n", bs, sector_num, nb_sectors, pnum);
if (n_sectors > nb_sectors) {
n_sectors = nb_sectors;
}
*pnum = n_sectors;
return bmap_entry != VDI_UNALLOCATED;
}
static void vdi_aio_cancel(BlockDriverAIOCB *blockacb)
{
/* TODO: This code is untested. How can I get it executed? */
VdiAIOCB *acb = container_of(blockacb, VdiAIOCB, common);
logout("\n");
if (acb->hd_aiocb) {
bdrv_aio_cancel(acb->hd_aiocb);
}
qemu_aio_release(acb);
}
static AIOPool vdi_aio_pool = {
.aiocb_size = sizeof(VdiAIOCB),
.cancel = vdi_aio_cancel,
};
static VdiAIOCB *vdi_aio_setup(BlockDriverState *bs, int64_t sector_num,
QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque, int is_write)
{
VdiAIOCB *acb;
logout("%p, %" PRId64 ", %p, %d, %p, %p, %d\n",
bs, sector_num, qiov, nb_sectors, cb, opaque, is_write);
acb = qemu_aio_get(&vdi_aio_pool, bs, cb, opaque);
if (acb) {
acb->hd_aiocb = NULL;
acb->sector_num = sector_num;
acb->qiov = qiov;
if (qiov->niov > 1) {
acb->buf = qemu_blockalign(bs, qiov->size);
acb->orig_buf = acb->buf;
if (is_write) {
qemu_iovec_to_buffer(qiov, acb->buf);
}
} else {
acb->buf = (uint8_t *)qiov->iov->iov_base;
}
acb->nb_sectors = nb_sectors;
acb->n_sectors = 0;
acb->bmap_first = VDI_UNALLOCATED;
acb->bmap_last = VDI_UNALLOCATED;
acb->block_buffer = NULL;
acb->header_modified = 0;
}
return acb;
}
static int vdi_schedule_bh(QEMUBHFunc *cb, VdiAIOCB *acb)
{
logout("\n");
if (acb->bh) {
return -EIO;
}
acb->bh = qemu_bh_new(cb, acb);
if (!acb->bh) {
return -EIO;
}
qemu_bh_schedule(acb->bh);
return 0;
}
static void vdi_aio_read_cb(void *opaque, int ret);
static void vdi_aio_read_bh(void *opaque)
{
VdiAIOCB *acb = opaque;
logout("\n");
qemu_bh_delete(acb->bh);
acb->bh = NULL;
vdi_aio_read_cb(opaque, 0);
}
static void vdi_aio_read_cb(void *opaque, int ret)
{
VdiAIOCB *acb = opaque;
BlockDriverState *bs = acb->common.bs;
BDRVVdiState *s = bs->opaque;
uint32_t bmap_entry;
uint32_t block_index;
uint32_t sector_in_block;
uint32_t n_sectors;
logout("%u sectors read\n", acb->n_sectors);
acb->hd_aiocb = NULL;
if (ret < 0) {
goto done;
}
acb->nb_sectors -= acb->n_sectors;
if (acb->nb_sectors == 0) {
/* request completed */
ret = 0;
goto done;
}
acb->sector_num += acb->n_sectors;
acb->buf += acb->n_sectors * SECTOR_SIZE;
block_index = acb->sector_num / s->block_sectors;
sector_in_block = acb->sector_num % s->block_sectors;
n_sectors = s->block_sectors - sector_in_block;
if (n_sectors > acb->nb_sectors) {
n_sectors = acb->nb_sectors;
}
logout("will read %u sectors starting at sector %" PRIu64 "\n",
n_sectors, acb->sector_num);
/* prepare next AIO request */
acb->n_sectors = n_sectors;
bmap_entry = le32_to_cpu(s->bmap[block_index]);
if (bmap_entry == VDI_UNALLOCATED) {
/* Block not allocated, return zeros, no need to wait. */
memset(acb->buf, 0, n_sectors * SECTOR_SIZE);
ret = vdi_schedule_bh(vdi_aio_read_bh, acb);
if (ret < 0) {
goto done;
}
} else {
uint64_t offset = s->header.offset_data / SECTOR_SIZE +
(uint64_t)bmap_entry * s->block_sectors +
sector_in_block;
acb->hd_iov.iov_base = (void *)acb->buf;
acb->hd_iov.iov_len = n_sectors * SECTOR_SIZE;
qemu_iovec_init_external(&acb->hd_qiov, &acb->hd_iov, 1);
acb->hd_aiocb = bdrv_aio_readv(bs->file, offset, &acb->hd_qiov,
n_sectors, vdi_aio_read_cb, acb);
if (acb->hd_aiocb == NULL) {
goto done;
}
}
return;
done:
if (acb->qiov->niov > 1) {
qemu_iovec_from_buffer(acb->qiov, acb->orig_buf, acb->qiov->size);
qemu_vfree(acb->orig_buf);
}
acb->common.cb(acb->common.opaque, ret);
qemu_aio_release(acb);
}
static BlockDriverAIOCB *vdi_aio_readv(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
VdiAIOCB *acb;
logout("\n");
acb = vdi_aio_setup(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
if (!acb) {
return NULL;
}
vdi_aio_read_cb(acb, 0);
return &acb->common;
}
static void vdi_aio_write_cb(void *opaque, int ret)
{
VdiAIOCB *acb = opaque;
BlockDriverState *bs = acb->common.bs;
BDRVVdiState *s = bs->opaque;
uint32_t bmap_entry;
uint32_t block_index;
uint32_t sector_in_block;
uint32_t n_sectors;
acb->hd_aiocb = NULL;
if (ret < 0) {
goto done;
}
acb->nb_sectors -= acb->n_sectors;
acb->sector_num += acb->n_sectors;
acb->buf += acb->n_sectors * SECTOR_SIZE;
if (acb->nb_sectors == 0) {
logout("finished data write\n");
acb->n_sectors = 0;
if (acb->header_modified) {
VdiHeader *header = acb->block_buffer;
logout("now writing modified header\n");
assert(acb->bmap_first != VDI_UNALLOCATED);
*header = s->header;
vdi_header_to_le(header);
acb->header_modified = 0;
acb->hd_iov.iov_base = acb->block_buffer;
acb->hd_iov.iov_len = SECTOR_SIZE;
qemu_iovec_init_external(&acb->hd_qiov, &acb->hd_iov, 1);
acb->hd_aiocb = bdrv_aio_writev(bs->file, 0, &acb->hd_qiov, 1,
vdi_aio_write_cb, acb);
if (acb->hd_aiocb == NULL) {
goto done;
}
return;
} else if (acb->bmap_first != VDI_UNALLOCATED) {
/* One or more new blocks were allocated. */
uint64_t offset;
uint32_t bmap_first;
uint32_t bmap_last;
qemu_free(acb->block_buffer);
acb->block_buffer = NULL;
bmap_first = acb->bmap_first;
bmap_last = acb->bmap_last;
logout("now writing modified block map entry %u...%u\n",
bmap_first, bmap_last);
/* Write modified sectors from block map. */
bmap_first /= (SECTOR_SIZE / sizeof(uint32_t));
bmap_last /= (SECTOR_SIZE / sizeof(uint32_t));
n_sectors = bmap_last - bmap_first + 1;
offset = s->bmap_sector + bmap_first;
acb->bmap_first = VDI_UNALLOCATED;
acb->hd_iov.iov_base = (void *)((uint8_t *)&s->bmap[0] +
bmap_first * SECTOR_SIZE);
acb->hd_iov.iov_len = n_sectors * SECTOR_SIZE;
qemu_iovec_init_external(&acb->hd_qiov, &acb->hd_iov, 1);
logout("will write %u block map sectors starting from entry %u\n",
n_sectors, bmap_first);
acb->hd_aiocb = bdrv_aio_writev(bs->file, offset, &acb->hd_qiov,
n_sectors, vdi_aio_write_cb, acb);
if (acb->hd_aiocb == NULL) {
goto done;
}
return;
}
ret = 0;
goto done;
}
logout("%u sectors written\n", acb->n_sectors);
block_index = acb->sector_num / s->block_sectors;
sector_in_block = acb->sector_num % s->block_sectors;
n_sectors = s->block_sectors - sector_in_block;
if (n_sectors > acb->nb_sectors) {
n_sectors = acb->nb_sectors;
}
logout("will write %u sectors starting at sector %" PRIu64 "\n",
n_sectors, acb->sector_num);
/* prepare next AIO request */
acb->n_sectors = n_sectors;
bmap_entry = le32_to_cpu(s->bmap[block_index]);
if (bmap_entry == VDI_UNALLOCATED) {
/* Allocate new block and write to it. */
uint64_t offset;
uint8_t *block;
bmap_entry = s->header.blocks_allocated;
s->bmap[block_index] = cpu_to_le32(bmap_entry);
s->header.blocks_allocated++;
offset = s->header.offset_data / SECTOR_SIZE +
(uint64_t)bmap_entry * s->block_sectors;
block = acb->block_buffer;
if (block == NULL) {
block = qemu_mallocz(s->block_size);
acb->block_buffer = block;
acb->bmap_first = block_index;
assert(!acb->header_modified);
acb->header_modified = 1;
}
acb->bmap_last = block_index;
memcpy(block + sector_in_block * SECTOR_SIZE,
acb->buf, n_sectors * SECTOR_SIZE);
acb->hd_iov.iov_base = (void *)block;
acb->hd_iov.iov_len = s->block_size;
qemu_iovec_init_external(&acb->hd_qiov, &acb->hd_iov, 1);
acb->hd_aiocb = bdrv_aio_writev(bs->file, offset,
&acb->hd_qiov, s->block_sectors,
vdi_aio_write_cb, acb);
if (acb->hd_aiocb == NULL) {
goto done;
}
} else {
uint64_t offset = s->header.offset_data / SECTOR_SIZE +
(uint64_t)bmap_entry * s->block_sectors +
sector_in_block;
acb->hd_iov.iov_base = (void *)acb->buf;
acb->hd_iov.iov_len = n_sectors * SECTOR_SIZE;
qemu_iovec_init_external(&acb->hd_qiov, &acb->hd_iov, 1);
acb->hd_aiocb = bdrv_aio_writev(bs->file, offset, &acb->hd_qiov,
n_sectors, vdi_aio_write_cb, acb);
if (acb->hd_aiocb == NULL) {
goto done;
}
}
return;
done:
if (acb->qiov->niov > 1) {
qemu_vfree(acb->orig_buf);
}
acb->common.cb(acb->common.opaque, ret);
qemu_aio_release(acb);
}
static BlockDriverAIOCB *vdi_aio_writev(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque)
{
VdiAIOCB *acb;
logout("\n");
acb = vdi_aio_setup(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
if (!acb) {
return NULL;
}
vdi_aio_write_cb(acb, 0);
return &acb->common;
}
static int vdi_create(const char *filename, QEMUOptionParameter *options)
{
int fd;
int result = 0;
uint64_t bytes = 0;
uint32_t blocks;
size_t block_size = 1 * MiB;
uint32_t image_type = VDI_TYPE_DYNAMIC;
VdiHeader header;
size_t i;
size_t bmap_size;
uint32_t *bmap;
logout("\n");
/* Read out options. */
while (options && options->name) {
if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
bytes = options->value.n;
#if defined(CONFIG_VDI_BLOCK_SIZE)
} else if (!strcmp(options->name, BLOCK_OPT_CLUSTER_SIZE)) {
if (options->value.n) {
/* TODO: Additional checks (SECTOR_SIZE * 2^n, ...). */
block_size = options->value.n;
}
#endif
#if defined(CONFIG_VDI_STATIC_IMAGE)
} else if (!strcmp(options->name, BLOCK_OPT_STATIC)) {
if (options->value.n) {
image_type = VDI_TYPE_STATIC;
}
#endif
}
options++;
}
fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
0644);
if (fd < 0) {
return -errno;
}
/* We need enough blocks to store the given disk size,
so always round up. */
blocks = (bytes + block_size - 1) / block_size;
bmap_size = blocks * sizeof(uint32_t);
bmap_size = ((bmap_size + SECTOR_SIZE - 1) & ~(SECTOR_SIZE -1));
memset(&header, 0, sizeof(header));
pstrcpy(header.text, sizeof(header.text), VDI_TEXT);
header.signature = VDI_SIGNATURE;
header.version = VDI_VERSION_1_1;
header.header_size = 0x180;
header.image_type = image_type;
header.offset_bmap = 0x200;
header.offset_data = 0x200 + bmap_size;
header.sector_size = SECTOR_SIZE;
header.disk_size = bytes;
header.block_size = block_size;
header.blocks_in_image = blocks;
if (image_type == VDI_TYPE_STATIC) {
header.blocks_allocated = blocks;
}
uuid_generate(header.uuid_image);
uuid_generate(header.uuid_last_snap);
/* There is no need to set header.uuid_link or header.uuid_parent here. */
#if defined(CONFIG_VDI_DEBUG)
vdi_header_print(&header);
#endif
vdi_header_to_le(&header);
if (write(fd, &header, sizeof(header)) < 0) {
result = -errno;
}
bmap = NULL;
if (bmap_size > 0) {
bmap = (uint32_t *)qemu_mallocz(bmap_size);
}
for (i = 0; i < blocks; i++) {
if (image_type == VDI_TYPE_STATIC) {
bmap[i] = i;
} else {
bmap[i] = VDI_UNALLOCATED;
}
}
if (write(fd, bmap, bmap_size) < 0) {
result = -errno;
}
qemu_free(bmap);
if (image_type == VDI_TYPE_STATIC) {
if (ftruncate(fd, sizeof(header) + bmap_size + blocks * block_size)) {
result = -errno;
}
}
if (close(fd) < 0) {
result = -errno;
}
return result;
}
static void vdi_close(BlockDriverState *bs)
{
}
static int vdi_flush(BlockDriverState *bs)
{
logout("\n");
return bdrv_flush(bs->file);
}
static QEMUOptionParameter vdi_create_options[] = {
{
.name = BLOCK_OPT_SIZE,
.type = OPT_SIZE,
.help = "Virtual disk size"
},
#if defined(CONFIG_VDI_BLOCK_SIZE)
{
.name = BLOCK_OPT_CLUSTER_SIZE,
.type = OPT_SIZE,
.help = "VDI cluster (block) size"
},
#endif
#if defined(CONFIG_VDI_STATIC_IMAGE)
{
.name = BLOCK_OPT_STATIC,
.type = OPT_FLAG,
.help = "VDI static (pre-allocated) image"
},
#endif
/* TODO: An additional option to set UUID values might be useful. */
{ NULL }
};
static BlockDriver bdrv_vdi = {
.format_name = "vdi",
.instance_size = sizeof(BDRVVdiState),
.bdrv_probe = vdi_probe,
.bdrv_open = vdi_open,
.bdrv_close = vdi_close,
.bdrv_create = vdi_create,
.bdrv_flush = vdi_flush,
.bdrv_is_allocated = vdi_is_allocated,
.bdrv_make_empty = vdi_make_empty,
.bdrv_aio_readv = vdi_aio_readv,
#if defined(CONFIG_VDI_WRITE)
.bdrv_aio_writev = vdi_aio_writev,
#endif
.bdrv_get_info = vdi_get_info,
.create_options = vdi_create_options,
.bdrv_check = vdi_check,
};
static void bdrv_vdi_init(void)
{
logout("\n");
bdrv_register(&bdrv_vdi);
}
block_init(bdrv_vdi_init);

View File

@@ -25,21 +25,11 @@
#define BLOCK_INT_H
#include "block.h"
#include "qemu-option.h"
#include "qemu-queue.h"
#define BLOCK_FLAG_ENCRYPT 1
#define BLOCK_FLAG_COMPRESS 2
#define BLOCK_FLAG_COMPAT6 4
#define BLOCK_OPT_SIZE "size"
#define BLOCK_OPT_ENCRYPT "encryption"
#define BLOCK_OPT_COMPAT6 "compat6"
#define BLOCK_OPT_BACKING_FILE "backing_file"
#define BLOCK_OPT_BACKING_FMT "backing_fmt"
#define BLOCK_OPT_CLUSTER_SIZE "cluster_size"
#define BLOCK_OPT_TABLE_SIZE "table_size"
#define BLOCK_OPT_PREALLOC "preallocation"
typedef struct AIOPool {
void (*cancel)(BlockDriverAIOCB *acb);
int aiocb_size;
@@ -50,39 +40,34 @@ struct BlockDriver {
const char *format_name;
int instance_size;
int (*bdrv_probe)(const uint8_t *buf, int buf_size, const char *filename);
int (*bdrv_probe_device)(const char *filename);
int (*bdrv_open)(BlockDriverState *bs, int flags);
int (*bdrv_file_open)(BlockDriverState *bs, const char *filename, int flags);
int (*bdrv_open)(BlockDriverState *bs, const char *filename, int flags);
int (*bdrv_read)(BlockDriverState *bs, int64_t sector_num,
uint8_t *buf, int nb_sectors);
int (*bdrv_write)(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors);
void (*bdrv_close)(BlockDriverState *bs);
int (*bdrv_create)(const char *filename, QEMUOptionParameter *options);
int (*bdrv_flush)(BlockDriverState *bs);
int (*bdrv_create)(const char *filename, int64_t total_sectors,
const char *backing_file, int flags);
void (*bdrv_flush)(BlockDriverState *bs);
int (*bdrv_is_allocated)(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, int *pnum);
int (*bdrv_set_key)(BlockDriverState *bs, const char *key);
int (*bdrv_make_empty)(BlockDriverState *bs);
/* aio */
BlockDriverAIOCB *(*bdrv_aio_readv)(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverAIOCB *(*bdrv_aio_read)(BlockDriverState *bs,
int64_t sector_num, uint8_t *buf, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
BlockDriverAIOCB *(*bdrv_aio_writev)(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverAIOCB *(*bdrv_aio_write)(BlockDriverState *bs,
int64_t sector_num, const uint8_t *buf, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
BlockDriverAIOCB *(*bdrv_aio_flush)(BlockDriverState *bs,
BlockDriverCompletionFunc *cb, void *opaque);
int (*bdrv_discard)(BlockDriverState *bs, int64_t sector_num,
int nb_sectors);
int (*bdrv_aio_multiwrite)(BlockDriverState *bs, BlockRequest *reqs,
int num_reqs);
int (*bdrv_merge_requests)(BlockDriverState *bs, BlockRequest* a,
BlockRequest *b);
void (*bdrv_aio_cancel)(BlockDriverAIOCB *acb);
int aiocb_size;
const char *protocol_name;
int (*bdrv_pread)(BlockDriverState *bs, int64_t offset,
uint8_t *buf, int count);
int (*bdrv_pwrite)(BlockDriverState *bs, int64_t offset,
const uint8_t *buf, int count);
int (*bdrv_truncate)(BlockDriverState *bs, int64_t offset);
int64_t (*bdrv_getlength)(BlockDriverState *bs);
int (*bdrv_write_compressed)(BlockDriverState *bs, int64_t sector_num,
@@ -95,17 +80,12 @@ struct BlockDriver {
int (*bdrv_snapshot_delete)(BlockDriverState *bs, const char *snapshot_id);
int (*bdrv_snapshot_list)(BlockDriverState *bs,
QEMUSnapshotInfo **psn_info);
int (*bdrv_snapshot_load_tmp)(BlockDriverState *bs,
const char *snapshot_name);
int (*bdrv_get_info)(BlockDriverState *bs, BlockDriverInfo *bdi);
int (*bdrv_save_vmstate)(BlockDriverState *bs, const uint8_t *buf,
int64_t pos, int size);
int (*bdrv_load_vmstate)(BlockDriverState *bs, uint8_t *buf,
int64_t pos, int size);
int (*bdrv_change_backing_file)(BlockDriverState *bs,
const char *backing_file, const char *backing_fmt);
int (*bdrv_put_buffer)(BlockDriverState *bs, const uint8_t *buf,
int64_t pos, int size);
int (*bdrv_get_buffer)(BlockDriverState *bs, uint8_t *buf,
int64_t pos, int size);
/* removable device specific */
int (*bdrv_is_inserted)(BlockDriverState *bs);
@@ -115,62 +95,34 @@ struct BlockDriver {
/* to control generic scsi devices */
int (*bdrv_ioctl)(BlockDriverState *bs, unsigned long int req, void *buf);
BlockDriverAIOCB *(*bdrv_aio_ioctl)(BlockDriverState *bs,
unsigned long int req, void *buf,
BlockDriverCompletionFunc *cb, void *opaque);
/* List of options for creating images, terminated by name == NULL */
QEMUOptionParameter *create_options;
/*
* Returns 0 for completed check, -errno for internal errors.
* The check results are stored in result.
*/
int (*bdrv_check)(BlockDriverState* bs, BdrvCheckResult *result);
void (*bdrv_debug_event)(BlockDriverState *bs, BlkDebugEvent event);
/*
* Returns 1 if newly created images are guaranteed to contain only
* zeros, 0 otherwise.
*/
int (*bdrv_has_zero_init)(BlockDriverState *bs);
QLIST_ENTRY(BlockDriver) list;
AIOPool aio_pool;
struct BlockDriver *next;
};
struct BlockDriverState {
int64_t total_sectors; /* if we are reading a disk image, give its
size in sectors */
int read_only; /* if true, the media is read only */
int keep_read_only; /* if true, the media was requested to stay read only */
int open_flags; /* flags used to open the file, re-used for re-open */
int removable; /* if true, the media can be removed */
int locked; /* if true, the media cannot temporarily be ejected */
int tray_open; /* if true, the virtual tray is open */
int encrypted; /* if true, the media is encrypted */
int valid_key; /* if true, a valid encryption key has been set */
int sg; /* if true, the device is a /dev/sg* */
/* event callback when inserting/removing */
void (*change_cb)(void *opaque, int reason);
void (*change_cb)(void *opaque);
void *change_opaque;
BlockDriver *drv; /* NULL means no media */
void *opaque;
DeviceState *peer;
char filename[1024];
char backing_file[1024]; /* if non zero, the image is a diff of
this file image */
char backing_format[16]; /* if non-zero and backing_file exists */
int is_temporary;
int media_changed;
BlockDriverState *backing_hd;
BlockDriverState *file;
/* async read/write emulation */
void *sync_aiocb;
@@ -180,33 +132,19 @@ struct BlockDriverState {
uint64_t wr_bytes;
uint64_t rd_ops;
uint64_t wr_ops;
uint64_t wr_highest_sector;
/* Whether the disk can expand beyond total_sectors */
int growable;
/* the memory alignment required for the buffers handled by this driver */
int buffer_alignment;
/* do we need to tell the quest if we have a volatile write cache? */
int enable_write_cache;
/* NOTE: the following infos are only hints for real hardware
drivers. They are not used by the block driver */
int cyls, heads, secs, translation;
int type;
BlockErrorAction on_read_error, on_write_error;
char device_name[32];
unsigned long *dirty_bitmap;
int64_t dirty_count;
int in_use; /* users other than guest access, eg. block migration */
QTAILQ_ENTRY(BlockDriverState) list;
BlockDriverState *next;
void *private;
};
#define CHANGE_MEDIA 0x01
#define CHANGE_SIZE 0x02
struct BlockDriverAIOCB {
AIOPool *pool;
BlockDriverState *bs;
@@ -217,49 +155,15 @@ struct BlockDriverAIOCB {
void get_tmp_filename(char *filename, int size);
void *qemu_aio_get(AIOPool *pool, BlockDriverState *bs,
BlockDriverCompletionFunc *cb, void *opaque);
void aio_pool_init(AIOPool *pool, int aiocb_size,
void (*cancel)(BlockDriverAIOCB *acb));
void *qemu_aio_get(BlockDriverState *bs, BlockDriverCompletionFunc *cb,
void *opaque);
void *qemu_aio_get_pool(AIOPool *pool, BlockDriverState *bs,
BlockDriverCompletionFunc *cb, void *opaque);
void qemu_aio_release(void *p);
void *qemu_blockalign(BlockDriverState *bs, size_t size);
#ifdef _WIN32
int is_windows_drive(const char *filename);
#endif
typedef struct BlockConf {
BlockDriverState *bs;
uint16_t physical_block_size;
uint16_t logical_block_size;
uint16_t min_io_size;
uint32_t opt_io_size;
int32_t bootindex;
uint32_t discard_granularity;
} BlockConf;
static inline unsigned int get_physical_block_exp(BlockConf *conf)
{
unsigned int exp = 0, size;
for (size = conf->physical_block_size;
size > conf->logical_block_size;
size >>= 1) {
exp++;
}
return exp;
}
#define DEFINE_BLOCK_PROPERTIES(_state, _conf) \
DEFINE_PROP_DRIVE("drive", _state, _conf.bs), \
DEFINE_PROP_UINT16("logical_block_size", _state, \
_conf.logical_block_size, 512), \
DEFINE_PROP_UINT16("physical_block_size", _state, \
_conf.physical_block_size, 512), \
DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \
DEFINE_PROP_UINT32("opt_io_size", _state, _conf.opt_io_size, 0), \
DEFINE_PROP_INT32("bootindex", _state, _conf.bootindex, -1), \
DEFINE_PROP_UINT32("discard_granularity", _state, \
_conf.discard_granularity, 0)
extern BlockDriverState *bdrv_first;
#endif /* BLOCK_INT_H */

View File

@@ -1,796 +0,0 @@
/*
* QEMU host block devices
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* This work is licensed under the terms of the GNU GPL, version 2 or
* later. See the COPYING file in the top-level directory.
*/
#include "block.h"
#include "blockdev.h"
#include "monitor.h"
#include "qerror.h"
#include "qemu-option.h"
#include "qemu-config.h"
#include "sysemu.h"
#include "hw/qdev.h"
#include "block_int.h"
static QTAILQ_HEAD(drivelist, DriveInfo) drives = QTAILQ_HEAD_INITIALIZER(drives);
static const char *const if_name[IF_COUNT] = {
[IF_NONE] = "none",
[IF_IDE] = "ide",
[IF_SCSI] = "scsi",
[IF_FLOPPY] = "floppy",
[IF_PFLASH] = "pflash",
[IF_MTD] = "mtd",
[IF_SD] = "sd",
[IF_VIRTIO] = "virtio",
[IF_XEN] = "xen",
};
static const int if_max_devs[IF_COUNT] = {
/*
* Do not change these numbers! They govern how drive option
* index maps to unit and bus. That mapping is ABI.
*
* All controllers used to imlement if=T drives need to support
* if_max_devs[T] units, for any T with if_max_devs[T] != 0.
* Otherwise, some index values map to "impossible" bus, unit
* values.
*
* For instance, if you change [IF_SCSI] to 255, -drive
* if=scsi,index=12 no longer means bus=1,unit=5, but
* bus=0,unit=12. With an lsi53c895a controller (7 units max),
* the drive can't be set up. Regression.
*/
[IF_IDE] = 2,
[IF_SCSI] = 7,
};
/*
* We automatically delete the drive when a device using it gets
* unplugged. Questionable feature, but we can't just drop it.
* Device models call blockdev_mark_auto_del() to schedule the
* automatic deletion, and generic qdev code calls blockdev_auto_del()
* when deletion is actually safe.
*/
void blockdev_mark_auto_del(BlockDriverState *bs)
{
DriveInfo *dinfo = drive_get_by_blockdev(bs);
if (dinfo) {
dinfo->auto_del = 1;
}
}
void blockdev_auto_del(BlockDriverState *bs)
{
DriveInfo *dinfo = drive_get_by_blockdev(bs);
if (dinfo && dinfo->auto_del) {
drive_put_ref(dinfo);
}
}
static int drive_index_to_bus_id(BlockInterfaceType type, int index)
{
int max_devs = if_max_devs[type];
return max_devs ? index / max_devs : 0;
}
static int drive_index_to_unit_id(BlockInterfaceType type, int index)
{
int max_devs = if_max_devs[type];
return max_devs ? index % max_devs : index;
}
QemuOpts *drive_def(const char *optstr)
{
return qemu_opts_parse(qemu_find_opts("drive"), optstr, 0);
}
QemuOpts *drive_add(BlockInterfaceType type, int index, const char *file,
const char *optstr)
{
QemuOpts *opts;
char buf[32];
opts = drive_def(optstr);
if (!opts) {
return NULL;
}
if (type != IF_DEFAULT) {
qemu_opt_set(opts, "if", if_name[type]);
}
if (index >= 0) {
snprintf(buf, sizeof(buf), "%d", index);
qemu_opt_set(opts, "index", buf);
}
if (file)
qemu_opt_set(opts, "file", file);
return opts;
}
DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit)
{
DriveInfo *dinfo;
/* seek interface, bus and unit */
QTAILQ_FOREACH(dinfo, &drives, next) {
if (dinfo->type == type &&
dinfo->bus == bus &&
dinfo->unit == unit)
return dinfo;
}
return NULL;
}
DriveInfo *drive_get_by_index(BlockInterfaceType type, int index)
{
return drive_get(type,
drive_index_to_bus_id(type, index),
drive_index_to_unit_id(type, index));
}
int drive_get_max_bus(BlockInterfaceType type)
{
int max_bus;
DriveInfo *dinfo;
max_bus = -1;
QTAILQ_FOREACH(dinfo, &drives, next) {
if(dinfo->type == type &&
dinfo->bus > max_bus)
max_bus = dinfo->bus;
}
return max_bus;
}
/* Get a block device. This should only be used for single-drive devices
(e.g. SD/Floppy/MTD). Multi-disk devices (scsi/ide) should use the
appropriate bus. */
DriveInfo *drive_get_next(BlockInterfaceType type)
{
static int next_block_unit[IF_COUNT];
return drive_get(type, 0, next_block_unit[type]++);
}
DriveInfo *drive_get_by_blockdev(BlockDriverState *bs)
{
DriveInfo *dinfo;
QTAILQ_FOREACH(dinfo, &drives, next) {
if (dinfo->bdrv == bs) {
return dinfo;
}
}
return NULL;
}
static void bdrv_format_print(void *opaque, const char *name)
{
error_printf(" %s", name);
}
static void drive_uninit(DriveInfo *dinfo)
{
qemu_opts_del(dinfo->opts);
bdrv_delete(dinfo->bdrv);
qemu_free(dinfo->id);
QTAILQ_REMOVE(&drives, dinfo, next);
qemu_free(dinfo);
}
void drive_put_ref(DriveInfo *dinfo)
{
assert(dinfo->refcount);
if (--dinfo->refcount == 0) {
drive_uninit(dinfo);
}
}
void drive_get_ref(DriveInfo *dinfo)
{
dinfo->refcount++;
}
static int parse_block_error_action(const char *buf, int is_read)
{
if (!strcmp(buf, "ignore")) {
return BLOCK_ERR_IGNORE;
} else if (!is_read && !strcmp(buf, "enospc")) {
return BLOCK_ERR_STOP_ENOSPC;
} else if (!strcmp(buf, "stop")) {
return BLOCK_ERR_STOP_ANY;
} else if (!strcmp(buf, "report")) {
return BLOCK_ERR_REPORT;
} else {
error_report("'%s' invalid %s error action",
buf, is_read ? "read" : "write");
return -1;
}
}
DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
{
const char *buf;
const char *file = NULL;
char devname[128];
const char *serial;
const char *mediastr = "";
BlockInterfaceType type;
enum { MEDIA_DISK, MEDIA_CDROM } media;
int bus_id, unit_id;
int cyls, heads, secs, translation;
BlockDriver *drv = NULL;
int max_devs;
int index;
int ro = 0;
int bdrv_flags = 0;
int on_read_error, on_write_error;
const char *devaddr;
DriveInfo *dinfo;
int snapshot = 0;
int ret;
translation = BIOS_ATA_TRANSLATION_AUTO;
if (default_to_scsi) {
type = IF_SCSI;
pstrcpy(devname, sizeof(devname), "scsi");
} else {
type = IF_IDE;
pstrcpy(devname, sizeof(devname), "ide");
}
media = MEDIA_DISK;
/* extract parameters */
bus_id = qemu_opt_get_number(opts, "bus", 0);
unit_id = qemu_opt_get_number(opts, "unit", -1);
index = qemu_opt_get_number(opts, "index", -1);
cyls = qemu_opt_get_number(opts, "cyls", 0);
heads = qemu_opt_get_number(opts, "heads", 0);
secs = qemu_opt_get_number(opts, "secs", 0);
snapshot = qemu_opt_get_bool(opts, "snapshot", 0);
ro = qemu_opt_get_bool(opts, "readonly", 0);
file = qemu_opt_get(opts, "file");
serial = qemu_opt_get(opts, "serial");
if ((buf = qemu_opt_get(opts, "if")) != NULL) {
pstrcpy(devname, sizeof(devname), buf);
for (type = 0; type < IF_COUNT && strcmp(buf, if_name[type]); type++)
;
if (type == IF_COUNT) {
error_report("unsupported bus type '%s'", buf);
return NULL;
}
}
max_devs = if_max_devs[type];
if (cyls || heads || secs) {
if (cyls < 1 || (type == IF_IDE && cyls > 16383)) {
error_report("invalid physical cyls number");
return NULL;
}
if (heads < 1 || (type == IF_IDE && heads > 16)) {
error_report("invalid physical heads number");
return NULL;
}
if (secs < 1 || (type == IF_IDE && secs > 63)) {
error_report("invalid physical secs number");
return NULL;
}
}
if ((buf = qemu_opt_get(opts, "trans")) != NULL) {
if (!cyls) {
error_report("'%s' trans must be used with cyls,heads and secs",
buf);
return NULL;
}
if (!strcmp(buf, "none"))
translation = BIOS_ATA_TRANSLATION_NONE;
else if (!strcmp(buf, "lba"))
translation = BIOS_ATA_TRANSLATION_LBA;
else if (!strcmp(buf, "auto"))
translation = BIOS_ATA_TRANSLATION_AUTO;
else {
error_report("'%s' invalid translation type", buf);
return NULL;
}
}
if ((buf = qemu_opt_get(opts, "media")) != NULL) {
if (!strcmp(buf, "disk")) {
media = MEDIA_DISK;
} else if (!strcmp(buf, "cdrom")) {
if (cyls || secs || heads) {
error_report("'%s' invalid physical CHS format", buf);
return NULL;
}
media = MEDIA_CDROM;
} else {
error_report("'%s' invalid media", buf);
return NULL;
}
}
if ((buf = qemu_opt_get(opts, "cache")) != NULL) {
if (!strcmp(buf, "off") || !strcmp(buf, "none")) {
bdrv_flags |= BDRV_O_NOCACHE;
} else if (!strcmp(buf, "writeback")) {
bdrv_flags |= BDRV_O_CACHE_WB;
} else if (!strcmp(buf, "unsafe")) {
bdrv_flags |= BDRV_O_CACHE_WB;
bdrv_flags |= BDRV_O_NO_FLUSH;
} else if (!strcmp(buf, "writethrough")) {
/* this is the default */
} else {
error_report("invalid cache option");
return NULL;
}
}
#ifdef CONFIG_LINUX_AIO
if ((buf = qemu_opt_get(opts, "aio")) != NULL) {
if (!strcmp(buf, "native")) {
bdrv_flags |= BDRV_O_NATIVE_AIO;
} else if (!strcmp(buf, "threads")) {
/* this is the default */
} else {
error_report("invalid aio option");
return NULL;
}
}
#endif
if ((buf = qemu_opt_get(opts, "format")) != NULL) {
if (strcmp(buf, "?") == 0) {
error_printf("Supported formats:");
bdrv_iterate_format(bdrv_format_print, NULL);
error_printf("\n");
return NULL;
}
drv = bdrv_find_whitelisted_format(buf);
if (!drv) {
error_report("'%s' invalid format", buf);
return NULL;
}
}
on_write_error = BLOCK_ERR_STOP_ENOSPC;
if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO && type != IF_NONE) {
error_report("werror is not supported by this bus type");
return NULL;
}
on_write_error = parse_block_error_action(buf, 0);
if (on_write_error < 0) {
return NULL;
}
}
on_read_error = BLOCK_ERR_REPORT;
if ((buf = qemu_opt_get(opts, "rerror")) != NULL) {
if (type != IF_IDE && type != IF_VIRTIO && type != IF_SCSI && type != IF_NONE) {
error_report("rerror is not supported by this bus type");
return NULL;
}
on_read_error = parse_block_error_action(buf, 1);
if (on_read_error < 0) {
return NULL;
}
}
if ((devaddr = qemu_opt_get(opts, "addr")) != NULL) {
if (type != IF_VIRTIO) {
error_report("addr is not supported by this bus type");
return NULL;
}
}
/* compute bus and unit according index */
if (index != -1) {
if (bus_id != 0 || unit_id != -1) {
error_report("index cannot be used with bus and unit");
return NULL;
}
bus_id = drive_index_to_bus_id(type, index);
unit_id = drive_index_to_unit_id(type, index);
}
/* if user doesn't specify a unit_id,
* try to find the first free
*/
if (unit_id == -1) {
unit_id = 0;
while (drive_get(type, bus_id, unit_id) != NULL) {
unit_id++;
if (max_devs && unit_id >= max_devs) {
unit_id -= max_devs;
bus_id++;
}
}
}
/* check unit id */
if (max_devs && unit_id >= max_devs) {
error_report("unit %d too big (max is %d)",
unit_id, max_devs - 1);
return NULL;
}
/*
* catch multiple definitions
*/
if (drive_get(type, bus_id, unit_id) != NULL) {
error_report("drive with bus=%d, unit=%d (index=%d) exists",
bus_id, unit_id, index);
return NULL;
}
/* init */
dinfo = qemu_mallocz(sizeof(*dinfo));
if ((buf = qemu_opts_id(opts)) != NULL) {
dinfo->id = qemu_strdup(buf);
} else {
/* no id supplied -> create one */
dinfo->id = qemu_mallocz(32);
if (type == IF_IDE || type == IF_SCSI)
mediastr = (media == MEDIA_CDROM) ? "-cd" : "-hd";
if (max_devs)
snprintf(dinfo->id, 32, "%s%i%s%i",
devname, bus_id, mediastr, unit_id);
else
snprintf(dinfo->id, 32, "%s%s%i",
devname, mediastr, unit_id);
}
dinfo->bdrv = bdrv_new(dinfo->id);
dinfo->devaddr = devaddr;
dinfo->type = type;
dinfo->bus = bus_id;
dinfo->unit = unit_id;
dinfo->opts = opts;
dinfo->refcount = 1;
if (serial)
strncpy(dinfo->serial, serial, sizeof(dinfo->serial) - 1);
QTAILQ_INSERT_TAIL(&drives, dinfo, next);
bdrv_set_on_error(dinfo->bdrv, on_read_error, on_write_error);
switch(type) {
case IF_IDE:
case IF_SCSI:
case IF_XEN:
case IF_NONE:
switch(media) {
case MEDIA_DISK:
if (cyls != 0) {
bdrv_set_geometry_hint(dinfo->bdrv, cyls, heads, secs);
bdrv_set_translation_hint(dinfo->bdrv, translation);
}
break;
case MEDIA_CDROM:
bdrv_set_type_hint(dinfo->bdrv, BDRV_TYPE_CDROM);
break;
}
break;
case IF_SD:
/* FIXME: This isn't really a floppy, but it's a reasonable
approximation. */
case IF_FLOPPY:
bdrv_set_type_hint(dinfo->bdrv, BDRV_TYPE_FLOPPY);
break;
case IF_PFLASH:
case IF_MTD:
break;
case IF_VIRTIO:
/* add virtio block device */
opts = qemu_opts_create(qemu_find_opts("device"), NULL, 0);
qemu_opt_set(opts, "driver", "virtio-blk-pci");
qemu_opt_set(opts, "drive", dinfo->id);
if (devaddr)
qemu_opt_set(opts, "addr", devaddr);
break;
default:
abort();
}
if (!file || !*file) {
return dinfo;
}
if (snapshot) {
/* always use cache=unsafe with snapshot */
bdrv_flags &= ~BDRV_O_CACHE_MASK;
bdrv_flags |= (BDRV_O_SNAPSHOT|BDRV_O_CACHE_WB|BDRV_O_NO_FLUSH);
}
if (media == MEDIA_CDROM) {
/* CDROM is fine for any interface, don't check. */
ro = 1;
} else if (ro == 1) {
if (type != IF_SCSI && type != IF_VIRTIO && type != IF_FLOPPY && type != IF_NONE) {
error_report("readonly not supported by this bus type");
goto err;
}
}
bdrv_flags |= ro ? 0 : BDRV_O_RDWR;
ret = bdrv_open(dinfo->bdrv, file, bdrv_flags, drv);
if (ret < 0) {
error_report("could not open disk image %s: %s",
file, strerror(-ret));
goto err;
}
if (bdrv_key_required(dinfo->bdrv))
autostart = 0;
return dinfo;
err:
bdrv_delete(dinfo->bdrv);
qemu_free(dinfo->id);
QTAILQ_REMOVE(&drives, dinfo, next);
qemu_free(dinfo);
return NULL;
}
void do_commit(Monitor *mon, const QDict *qdict)
{
const char *device = qdict_get_str(qdict, "device");
BlockDriverState *bs;
if (!strcmp(device, "all")) {
bdrv_commit_all();
} else {
bs = bdrv_find(device);
if (!bs) {
qerror_report(QERR_DEVICE_NOT_FOUND, device);
return;
}
bdrv_commit(bs);
}
}
int do_snapshot_blkdev(Monitor *mon, const QDict *qdict, QObject **ret_data)
{
const char *device = qdict_get_str(qdict, "device");
const char *filename = qdict_get_try_str(qdict, "snapshot_file");
const char *format = qdict_get_try_str(qdict, "format");
BlockDriverState *bs;
BlockDriver *drv, *proto_drv;
int ret = 0;
int flags;
if (!filename) {
qerror_report(QERR_MISSING_PARAMETER, "snapshot_file");
ret = -1;
goto out;
}
bs = bdrv_find(device);
if (!bs) {
qerror_report(QERR_DEVICE_NOT_FOUND, device);
ret = -1;
goto out;
}
if (!format) {
format = "qcow2";
}
drv = bdrv_find_format(format);
if (!drv) {
qerror_report(QERR_INVALID_BLOCK_FORMAT, format);
ret = -1;
goto out;
}
proto_drv = bdrv_find_protocol(filename);
if (!proto_drv) {
qerror_report(QERR_INVALID_BLOCK_FORMAT, format);
ret = -1;
goto out;
}
ret = bdrv_img_create(filename, format, bs->filename,
bs->drv->format_name, NULL, -1, bs->open_flags);
if (ret) {
goto out;
}
qemu_aio_flush();
bdrv_flush(bs);
flags = bs->open_flags;
bdrv_close(bs);
ret = bdrv_open(bs, filename, flags, drv);
/*
* If reopening the image file we just created fails, we really
* are in trouble :(
*/
if (ret != 0) {
abort();
}
out:
if (ret) {
ret = -1;
}
return ret;
}
static int eject_device(Monitor *mon, BlockDriverState *bs, int force)
{
if (!force) {
if (!bdrv_is_removable(bs)) {
qerror_report(QERR_DEVICE_NOT_REMOVABLE,
bdrv_get_device_name(bs));
return -1;
}
if (bdrv_is_locked(bs)) {
qerror_report(QERR_DEVICE_LOCKED, bdrv_get_device_name(bs));
return -1;
}
}
bdrv_close(bs);
return 0;
}
int do_eject(Monitor *mon, const QDict *qdict, QObject **ret_data)
{
BlockDriverState *bs;
int force = qdict_get_try_bool(qdict, "force", 0);
const char *filename = qdict_get_str(qdict, "device");
bs = bdrv_find(filename);
if (!bs) {
qerror_report(QERR_DEVICE_NOT_FOUND, filename);
return -1;
}
return eject_device(mon, bs, force);
}
int do_block_set_passwd(Monitor *mon, const QDict *qdict,
QObject **ret_data)
{
BlockDriverState *bs;
int err;
bs = bdrv_find(qdict_get_str(qdict, "device"));
if (!bs) {
qerror_report(QERR_DEVICE_NOT_FOUND, qdict_get_str(qdict, "device"));
return -1;
}
err = bdrv_set_key(bs, qdict_get_str(qdict, "password"));
if (err == -EINVAL) {
qerror_report(QERR_DEVICE_NOT_ENCRYPTED, bdrv_get_device_name(bs));
return -1;
} else if (err < 0) {
qerror_report(QERR_INVALID_PASSWORD);
return -1;
}
return 0;
}
int do_change_block(Monitor *mon, const char *device,
const char *filename, const char *fmt)
{
BlockDriverState *bs;
BlockDriver *drv = NULL;
int bdrv_flags;
bs = bdrv_find(device);
if (!bs) {
qerror_report(QERR_DEVICE_NOT_FOUND, device);
return -1;
}
if (fmt) {
drv = bdrv_find_whitelisted_format(fmt);
if (!drv) {
qerror_report(QERR_INVALID_BLOCK_FORMAT, fmt);
return -1;
}
}
if (eject_device(mon, bs, 0) < 0) {
return -1;
}
bdrv_flags = bdrv_is_read_only(bs) ? 0 : BDRV_O_RDWR;
bdrv_flags |= bdrv_is_snapshot(bs) ? BDRV_O_SNAPSHOT : 0;
if (bdrv_open(bs, filename, bdrv_flags, drv) < 0) {
qerror_report(QERR_OPEN_FILE_FAILED, filename);
return -1;
}
return monitor_read_bdrv_key_start(mon, bs, NULL, NULL);
}
int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
{
const char *id = qdict_get_str(qdict, "id");
BlockDriverState *bs;
BlockDriverState **ptr;
Property *prop;
bs = bdrv_find(id);
if (!bs) {
qerror_report(QERR_DEVICE_NOT_FOUND, id);
return -1;
}
if (bdrv_in_use(bs)) {
qerror_report(QERR_DEVICE_IN_USE, id);
return -1;
}
/* quiesce block driver; prevent further io */
qemu_aio_flush();
bdrv_flush(bs);
bdrv_close(bs);
/* clean up guest state from pointing to host resource by
* finding and removing DeviceState "drive" property */
if (bs->peer) {
for (prop = bs->peer->info->props; prop && prop->name; prop++) {
if (prop->info->type == PROP_TYPE_DRIVE) {
ptr = qdev_get_prop_ptr(bs->peer, prop);
if (*ptr == bs) {
bdrv_detach(bs, bs->peer);
*ptr = NULL;
break;
}
}
}
}
/* clean up host side */
drive_uninit(drive_get_by_blockdev(bs));
return 0;
}
/*
* XXX: replace the QERR_UNDEFINED_ERROR errors with real values once the
* existing QERR_ macro mess is cleaned up. A good example for better
* error reports can be found in the qemu-img resize code.
*/
int do_block_resize(Monitor *mon, const QDict *qdict, QObject **ret_data)
{
const char *device = qdict_get_str(qdict, "device");
int64_t size = qdict_get_int(qdict, "size");
BlockDriverState *bs;
bs = bdrv_find(device);
if (!bs) {
qerror_report(QERR_DEVICE_NOT_FOUND, device);
return -1;
}
if (size < 0) {
qerror_report(QERR_UNDEFINED_ERROR);
return -1;
}
if (bdrv_truncate(bs, size)) {
qerror_report(QERR_UNDEFINED_ERROR);
return -1;
}
return 0;
}

View File

@@ -1,68 +0,0 @@
/*
* QEMU host block devices
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* This work is licensed under the terms of the GNU GPL, version 2 or
* later. See the COPYING file in the top-level directory.
*/
#ifndef BLOCKDEV_H
#define BLOCKDEV_H
#include "block.h"
#include "qemu-queue.h"
void blockdev_mark_auto_del(BlockDriverState *bs);
void blockdev_auto_del(BlockDriverState *bs);
#define BLOCK_SERIAL_STRLEN 20
typedef enum {
IF_DEFAULT = -1, /* for use with drive_add() only */
IF_NONE,
IF_IDE, IF_SCSI, IF_FLOPPY, IF_PFLASH, IF_MTD, IF_SD, IF_VIRTIO, IF_XEN,
IF_COUNT
} BlockInterfaceType;
struct DriveInfo {
BlockDriverState *bdrv;
char *id;
const char *devaddr;
BlockInterfaceType type;
int bus;
int unit;
int auto_del; /* see blockdev_mark_auto_del() */
QemuOpts *opts;
char serial[BLOCK_SERIAL_STRLEN + 1];
QTAILQ_ENTRY(DriveInfo) next;
int refcount;
};
DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit);
DriveInfo *drive_get_by_index(BlockInterfaceType type, int index);
int drive_get_max_bus(BlockInterfaceType type);
DriveInfo *drive_get_next(BlockInterfaceType type);
void drive_get_ref(DriveInfo *dinfo);
void drive_put_ref(DriveInfo *dinfo);
DriveInfo *drive_get_by_blockdev(BlockDriverState *bs);
QemuOpts *drive_def(const char *optstr);
QemuOpts *drive_add(BlockInterfaceType type, int index, const char *file,
const char *optstr);
DriveInfo *drive_init(QemuOpts *arg, int default_to_scsi);
/* device-hotplug */
DriveInfo *add_init_drive(const char *opts);
void do_commit(Monitor *mon, const QDict *qdict);
int do_eject(Monitor *mon, const QDict *qdict, QObject **ret_data);
int do_block_set_passwd(Monitor *mon, const QDict *qdict, QObject **ret_data);
int do_change_block(Monitor *mon, const char *device,
const char *filename, const char *fmt);
int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data);
int do_snapshot_blkdev(Monitor *mon, const QDict *qdict, QObject **ret_data);
int do_block_resize(Monitor *mon, const QDict *qdict, QObject **ret_data);
#endif

View File

@@ -10,7 +10,7 @@
#include "qemu.h"
#define TARGET_NGROUPS 32
#define NGROUPS 32
/* ??? This should really be somewhere else. */
abi_long memcpy_to_target(abi_ulong dest, const void *src,
@@ -31,9 +31,9 @@ static int in_group_p(gid_t g)
/* return TRUE if we're in the specified group, FALSE otherwise */
int ngroup;
int i;
gid_t grouplist[TARGET_NGROUPS];
gid_t grouplist[NGROUPS];
ngroup = getgroups(TARGET_NGROUPS, grouplist);
ngroup = getgroups(NGROUPS, grouplist);
for(i = 0; i < ngroup; i++) {
if(grouplist[i] == g) {
return 1;
@@ -163,7 +163,7 @@ int loader_exec(const char * filename, char ** argv, char ** envp,
bprm.p = TARGET_PAGE_SIZE*MAX_ARG_PAGES-sizeof(unsigned int);
for (i=0 ; i<MAX_ARG_PAGES ; i++) /* clear page-table */
bprm.page[i] = NULL;
bprm.page[i] = 0;
retval = open(filename, O_RDONLY);
if (retval < 0)
return retval;
@@ -176,6 +176,8 @@ int loader_exec(const char * filename, char ** argv, char ** envp,
retval = prepare_binprm(&bprm);
infop->host_argv = argv;
if(retval>=0) {
if (bprm.buf[0] == 0x7f
&& bprm.buf[1] == 'E'

View File

@@ -126,9 +126,6 @@ static inline void init_thread(struct target_pt_regs *regs, struct image_info *i
regs->rax = 0;
regs->rsp = infop->start_stack;
regs->rip = infop->entry;
if (bsd_type == target_freebsd) {
regs->rdi = infop->start_stack;
}
}
#else
@@ -252,13 +249,8 @@ static inline void init_thread(struct target_pt_regs *regs, struct image_info *i
#else
if (personality(infop->personality) == PER_LINUX32)
regs->u_regs[14] = infop->start_stack - 16 * 4;
else {
else
regs->u_regs[14] = infop->start_stack - 16 * 8 - STACK_BIAS;
if (bsd_type == target_freebsd) {
regs->u_regs[8] = infop->start_stack;
regs->u_regs[11] = infop->start_stack;
}
}
#endif
}
@@ -553,6 +545,8 @@ static inline void memcpy_fromfs(void * to, const void * from, unsigned long n)
memcpy(to, from, n);
}
extern unsigned long x86_stack_size;
static int load_aout_interp(void * exptr, int interp_fd);
#ifdef BSWAP_NEEDED
@@ -1020,7 +1014,7 @@ static const char *lookup_symbolxx(struct syminfo *s, target_ulong orig_addr)
key.st_value = orig_addr;
sym = bsearch(&key, syms, s->disas_num_syms, sizeof(*syms), symfind);
if (sym != NULL) {
if (sym != 0) {
return s->disas_strtab + sym->st_name;
}
@@ -1044,7 +1038,7 @@ static void load_symbols(struct elfhdr *hdr, int fd)
struct elf_shdr sechdr, symtab, strtab;
char *strings;
struct syminfo *s;
struct elf_sym *syms, *new_syms;
struct elf_sym *syms;
lseek(fd, hdr->e_shoff, SEEK_SET);
for (i = 0; i < hdr->e_shnum; i++) {
@@ -1072,24 +1066,15 @@ static void load_symbols(struct elfhdr *hdr, int fd)
/* Now know where the strtab and symtab are. Snarf them. */
s = malloc(sizeof(*s));
syms = malloc(symtab.sh_size);
if (!syms) {
free(s);
if (!syms)
return;
}
s->disas_strtab = strings = malloc(strtab.sh_size);
if (!s->disas_strtab) {
free(s);
free(syms);
if (!s->disas_strtab)
return;
}
lseek(fd, symtab.sh_offset, SEEK_SET);
if (read(fd, syms, symtab.sh_size) != symtab.sh_size) {
free(s);
free(syms);
free(strings);
if (read(fd, syms, symtab.sh_size) != symtab.sh_size)
return;
}
nsyms = symtab.sh_size / sizeof(struct elf_sym);
@@ -1114,36 +1099,20 @@ static void load_symbols(struct elfhdr *hdr, int fd)
#endif
i++;
}
/* Attempt to free the storage associated with the local symbols
that we threw away. Whether or not this has any effect on the
memory allocation depends on the malloc implementation and how
many symbols we managed to discard. */
new_syms = realloc(syms, nsyms * sizeof(*syms));
if (new_syms == NULL) {
free(s);
free(syms);
free(strings);
return;
}
syms = new_syms;
syms = realloc(syms, nsyms * sizeof(*syms));
qsort(syms, nsyms, sizeof(*syms), symcmp);
lseek(fd, strtab.sh_offset, SEEK_SET);
if (read(fd, strings, strtab.sh_size) != strtab.sh_size) {
free(s);
free(syms);
free(strings);
if (read(fd, strings, strtab.sh_size) != strtab.sh_size)
return;
}
s->disas_num_syms = nsyms;
#if ELF_CLASS == ELFCLASS32
s->disas_symtab.elf32 = syms;
s->lookup_symbol = (lookup_symbol_t)lookup_symbolxx;
s->lookup_symbol = lookup_symbolxx;
#else
s->disas_symtab.elf64 = syms;
s->lookup_symbol = (lookup_symbol_t)lookup_symbolxx;
s->lookup_symbol = lookup_symbolxx;
#endif
s->next = syminfos;
syminfos = s;
@@ -1279,7 +1248,7 @@ int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
}
#if 0
printf("Using ELF interpreter %s\n", path(elf_interpreter));
printf("Using ELF interpreter %s\n", elf_interpreter);
#endif
if (retval >= 0) {
retval = open(path(elf_interpreter), O_RDONLY);
@@ -1301,7 +1270,7 @@ int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
}
if (retval >= 0) {
interp_ex = *((struct exec *) bprm->buf); /* aout exec-header */
interp_elf_ex = *((struct elfhdr *) bprm->buf); /* elf exec-header */
interp_elf_ex=*((struct elfhdr *) bprm->buf); /* elf exec-header */
}
if (retval < 0) {
perror("load_elf_binary3");
@@ -1326,7 +1295,7 @@ int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
}
if (interp_elf_ex.e_ident[0] != 0x7f ||
strncmp((char *)&interp_elf_ex.e_ident[1], "ELF",3) != 0) {
strncmp(&interp_elf_ex.e_ident[1], "ELF",3) != 0) {
interpreter_type &= ~INTERPRETER_ELF;
}
@@ -1370,29 +1339,6 @@ int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
info->mmap = 0;
elf_entry = (abi_ulong) elf_ex.e_entry;
#if defined(CONFIG_USE_GUEST_BASE)
/*
* In case where user has not explicitly set the guest_base, we
* probe here that should we set it automatically.
*/
if (!have_guest_base) {
/*
* Go through ELF program header table and find out whether
* any of the segments drop below our current mmap_min_addr and
* in that case set guest_base to corresponding address.
*/
for (i = 0, elf_ppnt = elf_phdata; i < elf_ex.e_phnum;
i++, elf_ppnt++) {
if (elf_ppnt->p_type != PT_LOAD)
continue;
if (HOST_PAGE_ALIGN(elf_ppnt->p_vaddr) < mmap_min_addr) {
guest_base = HOST_PAGE_ALIGN(mmap_min_addr);
break;
}
}
}
#endif /* CONFIG_USE_GUEST_BASE */
/* Do this so that we can load the interpreter, if need be. We will
change some of these later */
info->rss = 0;

Some files were not shown because too many files have changed in this diff Show More