Set SelectiveSuspendEnabled registy entry to one.
This makes Windows use remote suspend by default,
without manual registry fiddeling.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for special usb descriptors used by microsoft
windows. They allow more fine-grained control over driver binding and
adding entries to the registry for configuration.
As this is a guest-visible change the "msos-desc" compat property
has been added to turn this off for 1.7 + older
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use fprintf(stderr instead. This removes dependency of libqemuutil.a
on the monitor.
We can further justify this change, in that this code path should only
trigger under a fatal error condition. fprintf-stderr is probably the
appropriate medium as under a fatal error conidition the monitor itself
may be down and out for the count. So assertion failure messages should
go lowest common denominator - straight to stderr.
Fixes the build as reported by Kevin Wolf. Issue debugged and change
suggested by Luiz Capitulino. Issue introduced by
5d24ee70bc.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This patch uses inbound GPIO lines (IRQ and FIR) for
interrupts instead of using the old pic_cpu method,
which doesn't correspond to real hardware.
This creates the CPU's inbound IRQ and FIR GPIO lines and
updates the Microblaze boards to use this new method.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reveiwed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Switch the ARMCPUInfo arrays in cpu.c and cpu64.c to use a terminator
entry rather than looping based on ARRAY_SIZE. The latter causes
compile warnings on some versions of gcc if the configure options
happen to result in an empty array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
migration.next for 20140113
# gpg: Signature made Mon 13 Jan 2014 09:38:27 AM PST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* quintela/tags/migration/20140113: (49 commits)
migration: synchronize memory bitmap 64bits at a time
ram: split function that synchronizes a range
memory: syncronize kvm bitmap using bitmaps operations
memory: move bitmap synchronization to its own function
kvm: refactor start address calculation
kvm: use directly cpu_physical_memory_* api for tracking dirty pages
memory: unfold memory_region_test_and_clear()
memory: split cpu_physical_memory_* functions to its own include
memory: cpu_physical_memory_set_dirty_tracking() should return void
memory: make cpu_physical_memory_reset_dirty() take a length parameter
memory: s/dirty/clean/ in cpu_physical_memory_is_dirty()
memory: cpu_physical_memory_clear_dirty_range() now uses bitmap operations
memory: cpu_physical_memory_set_dirty_range() now uses bitmap operations
memory: use find_next_bit() to find dirty bits
memory: s/mask/clear/ cpu_physical_memory_mask_dirty_range
memory: cpu_physical_memory_get_dirty() is used as returning a bool
memory: make cpu_physical_memory_get_dirty() the main function
memory: unfold cpu_physical_memory_set_dirty_flag()
memory: unfold cpu_physical_memory_set_dirty() in its only user
memory: unfold cpu_physical_memory_clear_dirty_flag() in its only user
...
Message-id: 1389634834-24181-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This function is the only bit where we care about speed.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
If bitmaps are aligned properly, use bitmap operations. If they are
not, just use old bit at a time code.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
We want to have all the functions that handle directly the dirty
bitmap near. We will change it later.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Performance is important in this function, and we want to optimize even further.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
All the functions that use ram_addr_t should be here.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Result was always 0, and not used anywhere. Once there, use bool type
for the parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
We have an end parameter in all the callers, and this make it coherent
with the rest of cpu_physical_memory_* functions, that also take a
length parameter.
Once here, move the start/end calculation to
tlb_reset_dirty_range_all() as we don't need it here anymore.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
We were setting a range of bits, so use bitmap_set().
Note: xen has always been wrong, and should have used start instead
of addr from the beginning.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
And make cpu_physical_memory_get_dirty_flag() to use it. It used to
be the other way around.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
After all the previous patches, spliting the bitmap gets direct.
Note: For some reason, I have to move DIRTY_MEMORY_* definitions to
the beginning of memory.h to make compilation work.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
For historical reasons it was bit 3. Once there, create a constant to
know the number of clients.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
So remove the flag argument and do it directly. After this change,
there is nothing else using cpu_physical_memory_set_dirty_flags() so
remove it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Move index and size fields from int to long. We need that for
migration. long is 64 bits on sane architectures, and 32bits should
be enough on all the 32bits architectures.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
This will allow unit tests to be written for VMState code without
pulling dependencies from the savevm code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The VMState code will be moved to vmstate.c and it uses some of the
QEMU_VM_* constants, so move it to a header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The QEMUFile code will be moved to qemu-file.c. This will require making
the following functions non-static because they are used by the savevm.c
code:
* qemu_peek_byte()
* qemu_peek_buffer()
* qemu_file_skip()
* qemu_file_set_error()
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The migration thread appears to want to allow writeout to occur at full
speed rather than being rate limited during completion of state saving,
but sets the limit to INT_MAX when xfer_limit is INT64_MAX. This causes
problems if there's more than 2GB of state left to save at this point. It
probably ought to just be INT64_MAX instead.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Avoid a bogus COMPLETED->CANCELLED transition.
There is a period of time from the timing of setting COMPLETED state to that of migration thread exits, so during which it's problematic in COMPLETED->CANCELLED transition.
Signed-off-by: Zeng Junliang <zengjunliang@huawei.com>
Signed-off-by: Zhang Haoyu <haoyu.zhang@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
cocoa queue:
* pass command key to guest when VM has mousegrab
* add .qcow2 to extension list for image load dialog
* fix bugs in code for starting QEMU via image load dialog
* fix resize/redraw interaction
* draw window black if guest hasn't sent anything to screen
* minor style/typo fixes
* add myself as cocoa co-maintainer
# gpg: Signature made Sun 12 Jan 2014 02:45:52 PM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
* pmaydell/tags/pull-cocoa-20140112:
MAINTAINERS: add myself as cocoa UI co-maintainer
ui/cocoa: Remove stray tabs
ui/cocoa: Draw black rectangle if we have no data yet
ui/cocoa: Redraw at correct size when switching surface
ui/cocoa: Fix code for starting QEMU via image file load dialog
ui/cocoa: Add ".qcow2" to extension list for image load dialog
ui/cocoa: Send warning message to stderr, not stdout
ui/cocoa: Correct typos in comments and variable names
ui/cocoa: Pass command key through to guest when VM has mousegrab
Message-id: 1389567158-31066-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
target-arm queue:
* build fix for bigendian hosts
# gpg: Signature made Sun 12 Jan 2014 01:38:22 PM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
* pmaydell/tags/pull-target-arm-20140112:
arm: fix compile on bigendian host
Message-id: 1389562970-30944-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
If our redraw method is called before we have any data from the guest,
then draw a black rectangle rather than leaving the window empty.
This mostly only matters when the guest machine has no framebuffer
device, but it is more in line with the behaviour of other QEMU UIs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387853507-26298-3-git-send-email-peter.maydell@linaro.org
If the surface switch involved a resize, we were doing the redraw
at the old size rather than the new, because the update of
screen.width and screen.height was being done after the setFrame
method calls which triggered a redraw. Normally this isn't very
noticeable because typically after the guest triggers the window
resize it also draws something to it, which will in turn cause
us to redraw. However, the combination of a guest which never
draws to the display and a command line setting of a screen size
larger than the default can reveal odd effects.
Move most of the handling of resizes to the top of the method,
and guard it with a check that the surface size actually changed,
to avoid unnecessary operations (including some user visible ones
like "recenter the window on the screen") if the surface is the
same size as the old one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387853507-26298-2-git-send-email-peter.maydell@linaro.org
Fix a number of bugs in the code for starting QEMU via the image
file load dialog:
* use the actual argv[0] rather than "qemu": this avoids failures to
find BIOS image files caused by not looking in the correct directory
relative to the executable path
* allocate a large enough argv array to NULL terminate it
* use g_strdup(X) rather than g_strdup_printf("%s", X) or
g_strdup_printf(X)
* disable the printing of the simulated command line argument
(which is presumably intended for debug only)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-6-git-send-email-peter.maydell@linaro.org
The guest might want to be able to use the command key for its won
purposes (as command if it is MacOS X, or for the Windows key if
it is a PC guest, for instance). In line with other UI frontends,
pass it through if the guest has mousegrab, and only use it for UI
menu accelerators if not grabbed.
Thanks to John Arbuckle for reporting this problem, helping
us work through what the best solution would be and providing
a patch which was the initial inspiration for this one.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-2-git-send-email-peter.maydell@linaro.org
* stefanha/block:
commit: Remove unused check
qemu-iotests: Update test cases for commit active
commit: Support commit active layer
block: Add commit_active_start()
mirror: Move base to MirrorBlockJob
mirror: Don't close target
qemu-iotests: drop duplicate virtio-blk initialization failure
vmdk: Allow vmdk_create to work with protocol
vmdk: Check VMFS extent line field number
docs: updated qemu-img man page and qemu-doc to reflect VHDX support.
block: vhdx - improve error message, and .bdrv_check implementation
block/iscsi: Fix compilation for libiscsi 1.4.0 (API change)
qapi-schema: fix QEMU 1.8 references
dataplane: replace hostmem with memory_region_find
dataplane: change vring API to use VirtQueueElement
vring: factor common code for error exits
vring: create a common function to parse descriptors
sheepdog: fix dynamic grow for running qcow2 format
Message-id: 1387554416-5837-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
acpi,pci,pc,fedora,virtio fixes and enhancements
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony:
target-arm: fix build with gcc 4.8.2
virtio: add back call to virtio_bus_device_unplugged
piix: fix 32bit pci hole
qdev: switch reset to post-order
qdev: allow both pre- and post-order vists in qdev walking functions
pci: clean up resetting of IRQs
pci: do not export pci_bus_reset
ACPI/DSDT-CPU: cleanup bogus comment
ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler
acpi: ich9: allow guest to clear SCI rised by GPE
acpi: factor out common pm_update_sci() into acpi core
acpi: piix4: remove not needed GPE0 mask
i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash
i440fx-test: generate temporary firmware blob
i440fx-test: give each GTest case its own qtest
i440fx-test: qtest_start() should be paired with qtest_end()
hw/i386/pc_sysfw: support two flash drives
pc_piix: document gigabyte_align
piix: gigabyte alignment for ram
Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
QOM CPUState refactorings / X86CPU
* TLB invalidation optimizations
* X86CPU initialization cleanups
* Preparations for X86CPU hot-unplug
# gpg: Signature made Tue 24 Dec 2013 04:51:52 AM PST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 174F 0347 1BCC 221A 6175 6F96 FA2E D12D 3E7E 013F
* afaerber/tags/qom-cpu-for-anthony:
target-i386: Cleanup 'foo=val' feature handling
target-i386: Cleanup 'foo' feature handling
target-i386: Convert 'check' and 'enforce' to static properties
target-i386: Convert 'hv_spinlocks' to static property
target-i386: Convert 'hv_vapic' to static property
target-i386: Convert 'hv_relaxed' to static property
cpu-exec: Optimize X86CPU usage in cpu_exec()
target-i386: Move apic_state field from CPUX86State to X86CPU
cputlb: Tidy memset() of arrays
cputlb: Use memset() when flushing entries
target-arm queue:
* further A64 decoder patches, including enabling the aarch64-linux-user
target; this includes full floating point support. Neon is not yet
supported.
* cadence UART model fixes.
* some minor bug fixes and cleanups.
* all the softfloat fixes required by the new A64 instructions;
several of these will also be used by PPC.
* pmaydell/tags/pull-target-arm-20140107: (61 commits)
target-arm: A64: Add support for FCVT between half, single and double
target-arm: A64: Add 1-source 32-to-32 and 64-to-64 FP instructions
target-arm: A64: Add floating-point<->integer conversion instructions
target-arm: A64: Add floating-point<->fixed-point instructions
target-arm: A64: Add extra VFP fixed point conversion helpers
target-arm: Ignore most exceptions from scalbn when doing fixpoint conversion
target-arm: Rename A32 VFP conversion helpers
target-arm: Prepare VFP_CONV_FIX helpers for A64 uses
softfloat: Add support for ties-away rounding
softfloat: Refactor code handling various rounding modes
softfloat: Add float16 <=> float64 conversion functions
softfloat: Factor out RoundAndPackFloat16 and NormalizeFloat16Subnormal
softfloat: Provide complete set of accessors for fp state
softfloat: Fix float64_to_uint32_round_to_zero
softfloat: Fix float64_to_uint32
softfloat: Fix float64_to_uint64_round_to_zero
softfloat: Add float32_to_uint64()
softfloat: Fix factor 2 error for scalbn on denormal inputs
softfloat: Only raise Invalid when conversions to int are out of range
softfloat: Fix float64_to_uint64
...
Conflicts:
target-arm/cpu.h
aliguori: resolved trivial conflict
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
QOM infrastructure fixes and device conversions
* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model
# gpg: Signature made Tue 24 Dec 2013 09:04:05 AM PST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 174F 0347 1BCC 221A 6175 6F96 FA2E D12D 3E7E 013F
* afaerber/tags/qom-devices-for-anthony: (24 commits)
qdev-monitor: Improve error message for -device nonexistant
ioapic: QOM'ify ioapic
ioapic: Cleanup for QOM'ification
icc_bus: QOM'ify ICC
apic: QOM'ify APIC
apic: Cleanup for QOM'ification
qdev: Drop misleading qbus_free() function
qom: Detect bad reentrance during object_class_foreach()
tests: Test QOM interface casting
qom: Do not register interface "types" in the type table and fix names
qom: Split out object and class caches
qdev: Document that pointer properties kill device_add
hw: cannot_instantiate_with_device_add_yet due to pointer props
qdev-monitor: Avoid device_add crashing on non-device driver name
qdev: Do not let the user try to device_add when it cannot work
isa: Clean up use of cannot_instantiate_with_device_add_yet
vt82c686: Clean up use of cannot_instantiate_with_device_add_yet
piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
ich9: Document why cannot_instantiate_with_device_add_yet
pci-host: Consistently set cannot_instantiate_with_device_add_yet
...
* mjt/trivial-patches:
acpi unit-test: Remove temporary disk after test
mainstone: Fix duplicate array values for key 'space'
pxa27x: Add 'const' attribute to keyboard maps
pxa27x: Reduce size of keyboard matrix mapping
doc: Mention chardev:id in available devices for -serial
configure: Python tests must be done before help message
configure: Rewrite code for help message
fix -boot strict regressed in commit 6ef4716
vl: make boot_strict variable static (not used outside vl.c)
x86: only allow real mode to access 32bit without LMA
linux-user: Use macro TARGET_NSIG_WORDS where possible
exynos4210: Use macro ARRAY_SIZE where possible
ui/cocoa: Use macro ARRAY_SIZE where possible
misc: Use macro ARRAY_SIZE where possible
openrisc: Fix spelling in comment (transaltion -> translation)
hw/arm/highbank: Simplify code (memory region in device state)
Message-id: 1388182050-10270-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
target-arm queue:
* further A64 decoder patches, including enabling the aarch64-linux-user
target; this includes full floating point support. Neon is not yet
supported.
* cadence UART model fixes.
* some minor bug fixes and cleanups.
* all the softfloat fixes required by the new A64 instructions;
several of these will also be used by PPC.
# gpg: Signature made Wed 08 Jan 2014 11:25:12 AM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
* pmaydell/tags/pull-target-arm-20140108: (76 commits)
target-arm: A64: Add support for FCVT between half, single and double
target-arm: A64: Add 1-source 32-to-32 and 64-to-64 FP instructions
target-arm: A64: Add floating-point<->integer conversion instructions
target-arm: A64: Add floating-point<->fixed-point instructions
target-arm: A64: Add extra VFP fixed point conversion helpers
target-arm: Ignore most exceptions from scalbn when doing fixpoint conversion
target-arm: Rename A32 VFP conversion helpers
target-arm: Prepare VFP_CONV_FIX helpers for A64 uses
softfloat: Add support for ties-away rounding
softfloat: Refactor code handling various rounding modes
softfloat: Add float16 <=> float64 conversion functions
softfloat: Factor out RoundAndPackFloat16 and NormalizeFloat16Subnormal
softfloat: Provide complete set of accessors for fp state
softfloat: Fix float64_to_uint32_round_to_zero
softfloat: Fix float64_to_uint32
softfloat: Fix float64_to_uint64_round_to_zero
softfloat: Add float32_to_uint64()
softfloat: Fix factor 2 error for scalbn on denormal inputs
softfloat: Only raise Invalid when conversions to int are out of range
softfloat: Fix float64_to_uint64
...
Message-id: 1389209439-25448-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Add support for FCVT between half, single and double precision.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for those instructions in the "Floating-point
data-processing (1 source)" group which are simple 32-bit-to-32-bit
or 64-bit-to-64-bit operations (ie everything except FCVT between
single/double/half precision).
We put the new round-to-int helpers in helper.c because they will
also be used by the new ARMv8 A32/T32 rounding instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches,
updated to new infrastructure.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: reworked decode, split FCVT out into their own patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the AArch64 floating-point <-> integer conversion
instructions to disas_fpintconv. In the process we can rearrange
and simplify the detection of unallocated encodings a little.
We also correct a typo in the instruction encoding diagram for this
instruction group: bit 21 is 1, not 0.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the instruction group labeled
"Floating-point <-> fixed-point conversions" in the ARM ARM.
Namely this includes the instructions SCVTF, UCVTF, FCVTZS, FCVTZU
(scalar, fixed-point).
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased, updated to new infrastructure.
Applied bug fixes from Michael Matz and Janne Grunau.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: significant cleanup]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Define the full set of floating point to fixed point conversion
helpers required to support AArch64.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The VFP fixed point conversion helpers first call float_scalbn and
then convert the result to an integer. This scalbn operation may
set floating point exception flags for:
* overflow & inexact (if it overflows to infinity)
* input denormal squashed to zero
* output denormal squashed to zero
Of these, we only care about the input-denormal flag, since
the output of the whole scale-and-convert operation will be
an integer (so squashed-output-denormal and overflow don't
apply). Suppress the others by saving the pre-scalb exception
flags and only copying across a potential input-denormal flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The VFP conversion helpers for A32 round to zero as this is the only
rounding mode supported. Rename these helpers to make it clear that
they round to zero and are not suitable for use in the AArch64 code.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Make the VFP_CONV_FIX helpers a little more flexible in
preparation for the A64 uses. This requires two changes:
* use the correct softfloat conversion function based on itype
rather than always the int32 one; this is possible now that
softfloat provides int16 versions and necessary for the
future conversion-to-int64 A64 variants. This also allows
us to drop the awkward 'sign' macro argument.
* split the 'fsz' argument which currently controls both
width of the input float type and width of the output
integer type into two; this will allow us to specify the
A64 64-bit-int-to-single conversion function, where the
two widths are different.
We can also drop the (itype##_t) cast now that softfloat
guarantees that all the itype##_to_float* functions take
an integer argument of exactly the correct type.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
IEEE754-2008 specifies a new rounding mode:
"roundTiesToAway: the floating-point number nearest to the infinitely
precise result shall be delivered; if the two nearest floating-point
numbers bracketing an unrepresentable infinitely precise result are
equally near, the one with larger magnitude shall be delivered."
Implement this new mode (it is needed for ARM). The general principle
is that the required code is exactly like the ties-to-even code,
except that we do not need to do the "in case of exact tie clear LSB
to round-to-even", because the rounding operation naturally causes
the exact tie to round up in magnitude.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Refactor the code in various functions which calculates rounding
increments given the current rounding mode, so that instead of a
set of nested if statements we have a simple switch statement.
This will give us a clean place to add the case for the new
tiesAway rounding mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the conversion functions float16_to_float64() and
float64_to_float16(), which will be needed for the ARM
A64 instruction set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding conversions between float16 and float64,
factor out code currently done inline in the float16<=>float32
conversion functions into functions RoundAndPackFloat16 and
NormalizeFloat16Subnormal along the lines of the existing versions
for the other float types.
Note that we change the handling of zExp from the inline code
to match the API of the other RoundAndPackFloat functions; however
we leave the positioning of the binary point between bits 22 and 23
rather than shifting it up to the high end of the word.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tidy up the get/set accessors for the fp state to add missing ones
and make them all inline in softfloat.h rather than some inline and
some not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint32_round_to_zero routine is incorrect.
For example, the following test pattern:
425F81378DC0CD1F / 0x1.f81378dc0cd1fp+38
will erroneously set the inexact flag.
This patch re-implements the routine to use the float64_to_uint64_round_to_zero
routine. If saturation occurs we ignore any flags set by the
conversion function and raise only Invalid.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-6-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint32 has several flaws:
- for numbers between 2**32 and 2**64, the inexact exception flag
may get incorrectly set. In this case, only the invalid flag
should be set.
test pattern: 425F81378DC0CD1F / 0x1.f81378dc0cd1fp+38
- for numbers between 2**63 and 2**64, incorrect results may
be produced:
test pattern: 43EAAF73F1F0B8BD / 0x1.aaf73f1f0b8bdp+63
This patch re-implements float64_to_uint32 to re-use the
float64_to_uint64 routine (instead of float64_to_int64). For the
saturation case, we ignore any flags which the conversion routine
has set and raise only the invalid flag.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-5-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint64_round_to_zero routine is incorrect.
For example, the following test pattern:
46697351FF4AEC29 / 0x1.97351ff4aec29p+103
currently produces 8000000000000000 instead of FFFFFFFFFFFFFFFF.
This patch re-implements the routine to temporarily force the
rounding mode and use the float64_to_uint64 routine.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-4-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds the float32_to_uint64() routine, which converts a
32-bit floating point number to an unsigned 64 bit number.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed harmless but silly int64_t casts]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
If the input to float*_scalbn() is denormal then it represents
a number 0.[mantissabits] * 2^(1-exponentbias) (and the actual
exponent field is all zeroes). This means that when we convert
it to our unpacked encoding the unpacked exponent must be one
greater than for a normal number, which represents
1.[mantissabits] * 2^(e-exponentbias) for an exponent field e.
This meant we were giving answers too small by a factor of 2 for
all denormal inputs.
Note that the float-to-int routines also have this behaviour
of not adjusting the exponent for denormals; however there it is
harmless because denormals will all convert to integer zero anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We implement a number of float-to-integer conversions using conversion
to an integer type with a wider range and then a check against the
narrower range we are actually converting to. If we find the result to
be out of range we correctly raise the Invalid exception, but we must
also suppress other exceptions which might have been raised by the
conversion function we called.
This won't throw away exceptions we should have preserved, because for
the 'core' exception flags the IEEE spec mandates that the only valid
combinations of exception that can be raised by a single operation are
Inexact + Overflow and Inexact + Underflow. For the non-IEEE softfloat
flag for input denormals, we can guarantee that that flag won't have
been set for out of range float-to-int conversions because a squashed
denormal by definition goes to plus or minus zero, which is always in
range after conversion to integer zero.
This bug has been fixed for some of the float-to-int conversion routines
by previous patches; fix it for the remaining functions as well, so
that they all restore the pre-conversion status flags prior to raising
Invalid.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The comment preceding the float64_to_uint64 routine suggests that
the implementation is broken. And this is, indeed, the case.
This patch properly implements the conversion of a 64-bit floating
point number to an unsigned, 64 bit integer.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Currently the int-to-float functions take types which are specified
as "at least X bits wide", rather than "exactly X bits wide". This is
confusing and unhelpful since it means that the callers have to include
an explicit cast to [u]intXX_t to ensure the correct behaviour. Fix
them all to take the exactly-X-bits-wide types instead.
Note that this doesn't change behaviour at all since at the moment
we happen to define the 'int32' and 'uint32' types as exactly 32 bits
wide, and the 'int64' and 'uint64' types as exactly 64 bits wide.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the float to 16 bit integer conversion routines. These can be
trivially implemented in terms of the int32_to_float* routines, but
providing them makes our API more symmetrical and can simplify callers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
ARMv8 requires support for converting 32 and 64bit floating point
values to signed and unsigned 16bit integers.
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: updated not to incorrectly set Inexact for Invalid inputs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Our float32 to float16 conversion routine was generating the correct
numerical answers, but not always setting the right set of exception
flags. Fix this, mostly by rearranging the code to more closely
resemble RoundAndPackFloat*, and in particular:
* non-IEEE halfprec always raises Invalid for input NaNs
* we need to check for the overflow case before underflow
* we weren't getting the tininess-detected-after-rounding
case correct (somewhat academic since only ARM uses halfprec
and it is always tininess-detected-before-rounding)
* non-IEEE halfprec overflow raises only Invalid, not
Invalid + Inexact
* we weren't setting Inexact when we should
Also add some clarifying comments about what the code is doing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
commit 5ce4f35781
"target-arm: A64: add set_pc cpu method"
introduces an array aarch64_cpus which is zero
size if this code is built without CONFIG_USER_ONLY.
In particular an attempt to iterate over this array produces a warning
under gcc 4.8.2:
CC aarch64-softmmu/target-arm/cpu64.o
/scm/qemu/target-arm/cpu64.c: In function ‘aarch64_cpu_register_types’:
/scm/qemu/target-arm/cpu64.c:124:5: error: comparison of unsigned
expression < 0 is always false [-Werror=type-limits]
for (i = 0; i < ARRAY_SIZE(aarch64_cpus); i++) {
^
cc1: all warnings being treated as errors
This is the result of ARRAY_SIZE being an unsigned type,
causing "i" to be promoted to unsigned int as well.
As zero size arrays are a gcc extension, it seems
cleanest to add a dummy element with NULL name,
and test for it during registration.
We'll be able to drop this when we add more CPUs.
Cc: Alexander Graf <agraf@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20131223145216.GA22663@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't conditionalise GEM instantiation on networking attachments. The
device should always be present even if not attached to a network.
This allows for probing of the device by expectant guests (such as
OS's). This is needed because sysbus (or AXI in Xilinx's real hw case)
is not self identifying so the guest has no dynamic way of detecting
device absence.
Also allows for testing of the GEM in loopback mode with -net none.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 55649779a68ee3ff54b24c339b6fdbdccd1f0ed7.1388800598.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The can_receive logic was only taking into account the RxFIFO
occupancy. RxFIFO population is only used for the echo and normal modes
however. Improve the logic to correctly return the true number of
receivable characters based on the current mode:
Normal mode: RxFIFO vacancy.
Remote loopback: TxFIFO vacancy.
Echo mode: The min of the TxFIFO and RxFIFO vacancies.
Local Loopback: Return non-zero (to implement droppage)
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 36a58440c9ca5080151e95765c2c81342de8a8df.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tx timer implementation is flawed. Despite the controller
attempting to time the guest visable assertion of the TX-empty status
bit (and corresponding interrupt) the controller is still transmitting
characters instantaneously. There is also no sense of multiple character
delay.
The only side effect of this timer is assertion of tx-empty status. So
just remove the timer completely and hold tx-empty as permanently
asserted (its reset status). This matches the actual behaviour of
instantaneous transmission.
While we are VMSD version bumping, add the tx_fifo as device state to
prepare for upcomming TxFIFO flow control. Implement the interrupt
generation logic for the TxFIFO occupancy.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7a208a7eb8d79d6429fe28b1396c3104371807b2.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When setting rounding modes we currently just hardcode the numeric values
for rounding modes in a big switch statement.
With AArch64 support coming, we will need to refer to these rounding modes
at different places throughout the code though, so let's better give them
names so we don't get confused by accident.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, use names from ARM ARM.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the fmov instruction working on scalars
with an immediate payload.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebase and use new infrastructure.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Floating-point data-processing (3 source)"
group of instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches.
Implement using muladd as suggested by Richard Henderson.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: pull field decode up a level, use register accessors]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Floating-point data-processing (2 source)"
group of instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merge single and double precision patches. Rebase
and update to new infrastructure. Incorporate FMIN/FMAX support patch by
Michael Matz.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM:
* added convenience accessors for FP s and d regs
* pulled the field decode and opcode validity check up a level]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Use the VFP_BINOP macro to provide helpers for min, max, minnum
and maxnum, rather than hand-rolling them. (The float64 max
version is not used by A32 but will be needed for A64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The A64 128 bit vector registers are stored as a pair of
uint64_t values in the register array. This means that if
we're directly loading or storing a value of size less than
64 bits we must adjust the offset appropriately to account
for whether the host is bigendian or not. Provide utility
functions to abstract away the offsetof() calculations for
the FP registers.
For do_fp_st() we can sidestep most of the issues for 64 bit
and smaller reg-to-mem transfers by always doing a 64 bit
load from the register and writing just the piece we need
to memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When dumping the current CPU state, we can also get a request
to dump the FPU state along with the CPU's integer state.
Add support to dump the VFP state when that flag is set, so that
we can properly debug code that modifies floating point registers.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased. Output all registers, two per-line.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add a config for aarch64-linux-user, thereby enabling it as
a valid target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Now the AArch64 targets are in mainline we can include them in our
Travis test matrix.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the helpers provided for getting the correct FPSR and FPCR
values for the signal context.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The AArch64 linux-user support was written before but merged after
commit 4ce6243dc6 which cleaned up the handling of the clone()
syscall argument order, so we failed to notice that AArch64 also needs
TARGET_CLONE_BACKWARDS to be defined. Add this define so that clone
and fork syscalls work correctly.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This implement exclusive loads/stores for aarch64 along the lines of
arm32 and ppc implementations. The exclusive load remembers the address
and loaded value. The exclusive store throws an an exception which uses
those values to check for equality in a proper exclusive region.
This is not actually the architecture mandated semantics (for either
AArch32 or AArch64) but it is close enough for typical guest code
sequences to work correctly, and saves us from having to monitor all
guest stores. It's fairly easy to come up with test cases where we
don't behave like hardware - we don't for example model cache line
behaviour. However in the common patterns this works, and the existing
32 bit ARM exclusive access implementation has the same limitations.
AArch64 also implements new acquire/release loads/stores (which may be
either exclusive or non-exclusive). These imposes extra ordering
constraints on memory operations (ie they act as if they have an implicit
barrier built into them). As TCG is single-threaded all our barriers
are no-ops, so these just behave like normal loads and stores.
Signed-off-by: Michael Matz <matz@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.
The changes in semantics for the variables are:
exclusive_addr -> extended to 64 bits; -1ULL for "monitor lost",
otherwise always < 2^32 for AArch32
exclusive_val -> extended to 64 bits. 64 bit exclusives in AArch32 now
use the high half of exclusive_val instead of a separate exclusive_high
exclusive_high -> is no longer used in AArch32; extended to 64 bits as
it will be needed for AArch64's pair-of-64-bit-values exclusives.
exclusive_test -> extended to 64 bits, as it is an address. Since this is
a linux-user-only field, in arm-linux-user it will always have the top
32 bits zero.
exclusive_info -> stays 32 bits, as it is neither data nor address, but
simply holds register indexes etc. AArch64 will be able to fit all its
information into 32 bits as well.
Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reduce ifdefs, share more code between paths, reduce the number of TCG
ops generated. Avoid re-computing the size of the operation across
gen_pop_T0 and gen_pop_update.
Add forgotten zero-extension in the TARGET_X86_64, !CODE64, ss32 case.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reduce ifdefs, share more code between paths, reduce the number of TCG
ops generated.
Add forgotten zero-extension in the TARGET_X86_64, !CODE64, ss32 case.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Unlike the addr32, there was no bug. But we can use the same
technique to reduce the number of TCG ops.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Changing the domain to TCGMemOp makes it easier to interoperate
with other portions of the rest of the translator.
We now only have one domain for size operands inside the translator,
which makes things less confusing all the way around. There are
still a number of helpers that continue to use the log2-1 domain.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change the domain of the parameter and update all callers.
Which lets us defer completely to gen_op_mov_reg_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Changing the domain to TCGMemOp makes it easier to interoperate
with other portions of the rest of the translator.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change the domain of the parameter and update all callers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
These functions used the aflags/dflags domain, which is log2-1
of the byte size. Confusingly, they used enumeration values
from the log2 domain.
Change the domain of the parameter and update all callers.
Since we're now in a common domain, defer the deposit/extend/mov
decision to gen_op_mov_reg_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The 'ot' variables (operand type?) hold the log2(byte size) of
the operand being manipulated. This is the same as the MO_SIZE
subset of the TCGMemOp. Indeed, we often pass 'ot' to the
tcg_gen_qemu_ld/st functions.
Changing the type from 'int' makes it easier to see what domain
the variable should be.
This does require adding some default cases to some switch statements,
to avoid the 'unhandled enumeration value' warning that would result
from the change of type.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace it with tcg_gen_ext16u_tl, and in two cases merge with a
previous move from cpu_regs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace it with tcg_gen_ext16u_tl. In four places we can combine that
with a previous move into cpu_T[0], and in one place we can infer that
the zero-extension has already happened via the previous load.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Propagate the definitions into all users. In two cases, this allows
us to share code between the 32-bit and 64-bit immediate moves.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Propagate the definitions into all users. The only time that
gen_op_movl_T1_imu was used, the input was type 'unsigned',
so the replacement works identically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Propagate the definition of gen_op_movl_T0_im to all users.
The function gen_op_movl_T0_imu was unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the known MO_32/MO_64 cases, we don't need to extend a 32-bit temp
into a 64-bit temp before storing into the hardware register.
We do need the extension for the MO_8/MO_16 cases, in order for the
deposit_tl operation to work, so leave those alone.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can now use tcg_gen_qemu_st_i32 directly to avoid the extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can now use tcg_gen_qemu_ld_i32 directly to avoid the truncation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the 16 and 32-bit cases, we don't need to truncate via
a temporary register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The reg_ptr and offset_ptr outputs are universally unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Always perform a sign-extending load. In the extremely unlikely
case that we've used an 0x66 prefix, the extension to 64-bits is
unnecessary but not wrong; the store will still examine only 16 bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can use the MO_SIGN bit to tidy the reg-reg switch statement
as well as pass it on to gen_op_ld_v, eliminating one call.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
By inspection, obviously we should be storing T[1] not T[0].
This could only happen for x86_64 in 64-bit mode with 0x66
prefix to call insn -- i.e. never.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Too many places have the same test vs OR_TMP0 to indicate
a write back to memory. Hoist that to a subroutine.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace its users by gen_op_ld_v with the MO_SIGN bit set.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The MO_8/16/32/64 constants have the same encoding and meaning
as the OT_BYTE/WORD/LONG/QUAD. Since we rely on them being the
same, for the qemu_ld/st helpers, standardize on the common names.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add support for FCVT between half, single and double precision.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for those instructions in the "Floating-point
data-processing (1 source)" group which are simple 32-bit-to-32-bit
or 64-bit-to-64-bit operations (ie everything except FCVT between
single/double/half precision).
We put the new round-to-int helpers in helper.c because they will
also be used by the new ARMv8 A32/T32 rounding instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches,
updated to new infrastructure.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: reworked decode, split FCVT out into their own patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the AArch64 floating-point <-> integer conversion
instructions to disas_fpintconv. In the process we can rearrange
and simplify the detection of unallocated encodings a little.
We also correct a typo in the instruction encoding diagram for this
instruction group: bit 21 is 1, not 0.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the instruction group labeled
"Floating-point <-> fixed-point conversions" in the ARM ARM.
Namely this includes the instructions SCVTF, UCVTF, FCVTZS, FCVTZU
(scalar, fixed-point).
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased, updated to new infrastructure.
Applied bug fixes from Michael Matz and Janne Grunau.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: significant cleanup]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Define the full set of floating point to fixed point conversion
helpers required to support AArch64.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The VFP fixed point conversion helpers first call float_scalbn and
then convert the result to an integer. This scalbn operation may
set floating point exception flags for:
* overflow & inexact (if it overflows to infinity)
* input denormal squashed to zero
* output denormal squashed to zero
Of these, we only care about the input-denormal flag, since
the output of the whole scale-and-convert operation will be
an integer (so squashed-output-denormal and overflow don't
apply). Suppress the others by saving the pre-scalb exception
flags and only copying across a potential input-denormal flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The VFP conversion helpers for A32 round to zero as this is the only
rounding mode supported. Rename these helpers to make it clear that
they round to zero and are not suitable for use in the AArch64 code.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Make the VFP_CONV_FIX helpers a little more flexible in
preparation for the A64 uses. This requires two changes:
* use the correct softfloat conversion function based on itype
rather than always the int32 one; this is possible now that
softfloat provides int16 versions and necessary for the
future conversion-to-int64 A64 variants. This also allows
us to drop the awkward 'sign' macro argument.
* split the 'fsz' argument which currently controls both
width of the input float type and width of the output
integer type into two; this will allow us to specify the
A64 64-bit-int-to-single conversion function, where the
two widths are different.
We can also drop the (itype##_t) cast now that softfloat
guarantees that all the itype##_to_float* functions take
an integer argument of exactly the correct type.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
IEEE754-2008 specifies a new rounding mode:
"roundTiesToAway: the floating-point number nearest to the infinitely
precise result shall be delivered; if the two nearest floating-point
numbers bracketing an unrepresentable infinitely precise result are
equally near, the one with larger magnitude shall be delivered."
Implement this new mode (it is needed for ARM). The general principle
is that the required code is exactly like the ties-to-even code,
except that we do not need to do the "in case of exact tie clear LSB
to round-to-even", because the rounding operation naturally causes
the exact tie to round up in magnitude.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Refactor the code in various functions which calculates rounding
increments given the current rounding mode, so that instead of a
set of nested if statements we have a simple switch statement.
This will give us a clean place to add the case for the new
tiesAway rounding mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the conversion functions float16_to_float64() and
float64_to_float16(), which will be needed for the ARM
A64 instruction set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding conversions between float16 and float64,
factor out code currently done inline in the float16<=>float32
conversion functions into functions RoundAndPackFloat16 and
NormalizeFloat16Subnormal along the lines of the existing versions
for the other float types.
Note that we change the handling of zExp from the inline code
to match the API of the other RoundAndPackFloat functions; however
we leave the positioning of the binary point between bits 22 and 23
rather than shifting it up to the high end of the word.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tidy up the get/set accessors for the fp state to add missing ones
and make them all inline in softfloat.h rather than some inline and
some not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint32_round_to_zero routine is incorrect.
For example, the following test pattern:
425F81378DC0CD1F / 0x1.f81378dc0cd1fp+38
will erroneously set the inexact flag.
This patch re-implements the routine to use the float64_to_uint64_round_to_zero
routine. If saturation occurs we ignore any flags set by the
conversion function and raise only Invalid.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-6-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint32 has several flaws:
- for numbers between 2**32 and 2**64, the inexact exception flag
may get incorrectly set. In this case, only the invalid flag
should be set.
test pattern: 425F81378DC0CD1F / 0x1.f81378dc0cd1fp+38
- for numbers between 2**63 and 2**64, incorrect results may
be produced:
test pattern: 43EAAF73F1F0B8BD / 0x1.aaf73f1f0b8bdp+63
This patch re-implements float64_to_uint32 to re-use the
float64_to_uint64 routine (instead of float64_to_int64). For the
saturation case, we ignore any flags which the conversion routine
has set and raise only the invalid flag.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-5-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The float64_to_uint64_round_to_zero routine is incorrect.
For example, the following test pattern:
46697351FF4AEC29 / 0x1.97351ff4aec29p+103
currently produces 8000000000000000 instead of FFFFFFFFFFFFFFFF.
This patch re-implements the routine to temporarily force the
rounding mode and use the float64_to_uint64 routine.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Message-id: 1387397961-4894-4-git-send-email-tommusta@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds the float32_to_uint64() routine, which converts a
32-bit floating point number to an unsigned 64 bit number.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed harmless but silly int64_t casts]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
If the input to float*_scalbn() is denormal then it represents
a number 0.[mantissabits] * 2^(1-exponentbias) (and the actual
exponent field is all zeroes). This means that when we convert
it to our unpacked encoding the unpacked exponent must be one
greater than for a normal number, which represents
1.[mantissabits] * 2^(e-exponentbias) for an exponent field e.
This meant we were giving answers too small by a factor of 2 for
all denormal inputs.
Note that the float-to-int routines also have this behaviour
of not adjusting the exponent for denormals; however there it is
harmless because denormals will all convert to integer zero anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We implement a number of float-to-integer conversions using conversion
to an integer type with a wider range and then a check against the
narrower range we are actually converting to. If we find the result to
be out of range we correctly raise the Invalid exception, but we must
also suppress other exceptions which might have been raised by the
conversion function we called.
This won't throw away exceptions we should have preserved, because for
the 'core' exception flags the IEEE spec mandates that the only valid
combinations of exception that can be raised by a single operation are
Inexact + Overflow and Inexact + Underflow. For the non-IEEE softfloat
flag for input denormals, we can guarantee that that flag won't have
been set for out of range float-to-int conversions because a squashed
denormal by definition goes to plus or minus zero, which is always in
range after conversion to integer zero.
This bug has been fixed for some of the float-to-int conversion routines
by previous patches; fix it for the remaining functions as well, so
that they all restore the pre-conversion status flags prior to raising
Invalid.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The comment preceding the float64_to_uint64 routine suggests that
the implementation is broken. And this is, indeed, the case.
This patch properly implements the conversion of a 64-bit floating
point number to an unsigned, 64 bit integer.
This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Currently the int-to-float functions take types which are specified
as "at least X bits wide", rather than "exactly X bits wide". This is
confusing and unhelpful since it means that the callers have to include
an explicit cast to [u]intXX_t to ensure the correct behaviour. Fix
them all to take the exactly-X-bits-wide types instead.
Note that this doesn't change behaviour at all since at the moment
we happen to define the 'int32' and 'uint32' types as exactly 32 bits
wide, and the 'int64' and 'uint64' types as exactly 64 bits wide.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the float to 16 bit integer conversion routines. These can be
trivially implemented in terms of the int32_to_float* routines, but
providing them makes our API more symmetrical and can simplify callers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
ARMv8 requires support for converting 32 and 64bit floating point
values to signed and unsigned 16bit integers.
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: updated not to incorrectly set Inexact for Invalid inputs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Our float32 to float16 conversion routine was generating the correct
numerical answers, but not always setting the right set of exception
flags. Fix this, mostly by rearranging the code to more closely
resemble RoundAndPackFloat*, and in particular:
* non-IEEE halfprec always raises Invalid for input NaNs
* we need to check for the overflow case before underflow
* we weren't getting the tininess-detected-after-rounding
case correct (somewhat academic since only ARM uses halfprec
and it is always tininess-detected-before-rounding)
* non-IEEE halfprec overflow raises only Invalid, not
Invalid + Inexact
* we weren't setting Inexact when we should
Also add some clarifying comments about what the code is doing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
commit 5ce4f35781
"target-arm: A64: add set_pc cpu method"
introduces an array aarch64_cpus which is zero
size if this code is built without CONFIG_USER_ONLY.
In particular an attempt to iterate over this array produces a warning
under gcc 4.8.2:
CC aarch64-softmmu/target-arm/cpu64.o
/scm/qemu/target-arm/cpu64.c: In function ‘aarch64_cpu_register_types’:
/scm/qemu/target-arm/cpu64.c:124:5: error: comparison of unsigned
expression < 0 is always false [-Werror=type-limits]
for (i = 0; i < ARRAY_SIZE(aarch64_cpus); i++) {
^
cc1: all warnings being treated as errors
This is the result of ARRAY_SIZE being an unsigned type,
causing "i" to be promoted to unsigned int as well.
As zero size arrays are a gcc extension, it seems
cleanest to add a dummy element with NULL name,
and test for it during registration.
We'll be able to drop this when we add more CPUs.
Cc: Alexander Graf <agraf@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20131223145216.GA22663@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't conditionalise GEM instantiation on networking attachments. The
device should always be present even if not attached to a network.
This allows for probing of the device by expectant guests (such as
OS's). This is needed because sysbus (or AXI in Xilinx's real hw case)
is not self identifying so the guest has no dynamic way of detecting
device absence.
Also allows for testing of the GEM in loopback mode with -net none.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 55649779a68ee3ff54b24c339b6fdbdccd1f0ed7.1388800598.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The can_receive logic was only taking into account the RxFIFO
occupancy. RxFIFO population is only used for the echo and normal modes
however. Improve the logic to correctly return the true number of
receivable characters based on the current mode:
Normal mode: RxFIFO vacancy.
Remote loopback: TxFIFO vacancy.
Echo mode: The min of the TxFIFO and RxFIFO vacancies.
Local Loopback: Return non-zero (to implement droppage)
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 36a58440c9ca5080151e95765c2c81342de8a8df.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tx timer implementation is flawed. Despite the controller
attempting to time the guest visable assertion of the TX-empty status
bit (and corresponding interrupt) the controller is still transmitting
characters instantaneously. There is also no sense of multiple character
delay.
The only side effect of this timer is assertion of tx-empty status. So
just remove the timer completely and hold tx-empty as permanently
asserted (its reset status). This matches the actual behaviour of
instantaneous transmission.
While we are VMSD version bumping, add the tx_fifo as device state to
prepare for upcomming TxFIFO flow control. Implement the interrupt
generation logic for the TxFIFO occupancy.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7a208a7eb8d79d6429fe28b1396c3104371807b2.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When setting rounding modes we currently just hardcode the numeric values
for rounding modes in a big switch statement.
With AArch64 support coming, we will need to refer to these rounding modes
at different places throughout the code though, so let's better give them
names so we don't get confused by accident.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, use names from ARM ARM.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the fmov instruction working on scalars
with an immediate payload.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebase and use new infrastructure.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Floating-point data-processing (3 source)"
group of instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches.
Implement using muladd as suggested by Richard Henderson.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: pull field decode up a level, use register accessors]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Floating-point data-processing (2 source)"
group of instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merge single and double precision patches. Rebase
and update to new infrastructure. Incorporate FMIN/FMAX support patch by
Michael Matz.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM:
* added convenience accessors for FP s and d regs
* pulled the field decode and opcode validity check up a level]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Use the VFP_BINOP macro to provide helpers for min, max, minnum
and maxnum, rather than hand-rolling them. (The float64 max
version is not used by A32 but will be needed for A64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The A64 128 bit vector registers are stored as a pair of
uint64_t values in the register array. This means that if
we're directly loading or storing a value of size less than
64 bits we must adjust the offset appropriately to account
for whether the host is bigendian or not. Provide utility
functions to abstract away the offsetof() calculations for
the FP registers.
For do_fp_st() we can sidestep most of the issues for 64 bit
and smaller reg-to-mem transfers by always doing a 64 bit
load from the register and writing just the piece we need
to memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When dumping the current CPU state, we can also get a request
to dump the FPU state along with the CPU's integer state.
Add support to dump the VFP state when that flag is set, so that
we can properly debug code that modifies floating point registers.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased. Output all registers, two per-line.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add a config for aarch64-linux-user, thereby enabling it as
a valid target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Now the AArch64 targets are in mainline we can include them in our
Travis test matrix.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the helpers provided for getting the correct FPSR and FPCR
values for the signal context.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The AArch64 linux-user support was written before but merged after
commit 4ce6243dc6 which cleaned up the handling of the clone()
syscall argument order, so we failed to notice that AArch64 also needs
TARGET_CLONE_BACKWARDS to be defined. Add this define so that clone
and fork syscalls work correctly.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This implement exclusive loads/stores for aarch64 along the lines of
arm32 and ppc implementations. The exclusive load remembers the address
and loaded value. The exclusive store throws an an exception which uses
those values to check for equality in a proper exclusive region.
This is not actually the architecture mandated semantics (for either
AArch32 or AArch64) but it is close enough for typical guest code
sequences to work correctly, and saves us from having to monitor all
guest stores. It's fairly easy to come up with test cases where we
don't behave like hardware - we don't for example model cache line
behaviour. However in the common patterns this works, and the existing
32 bit ARM exclusive access implementation has the same limitations.
AArch64 also implements new acquire/release loads/stores (which may be
either exclusive or non-exclusive). These imposes extra ordering
constraints on memory operations (ie they act as if they have an implicit
barrier built into them). As TCG is single-threaded all our barriers
are no-ops, so these just behave like normal loads and stores.
Signed-off-by: Michael Matz <matz@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.
The changes in semantics for the variables are:
exclusive_addr -> extended to 64 bits; -1ULL for "monitor lost",
otherwise always < 2^32 for AArch32
exclusive_val -> extended to 64 bits. 64 bit exclusives in AArch32 now
use the high half of exclusive_val instead of a separate exclusive_high
exclusive_high -> is no longer used in AArch32; extended to 64 bits as
it will be needed for AArch64's pair-of-64-bit-values exclusives.
exclusive_test -> extended to 64 bits, as it is an address. Since this is
a linux-user-only field, in arm-linux-user it will always have the top
32 bits zero.
exclusive_info -> stays 32 bits, as it is neither data nor address, but
simply holds register indexes etc. AArch64 will be able to fit all its
information into 32 bits as well.
Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The common pattern for system registers in a 64-bit capable ARM
CPU is that when in AArch32 the cp15 register is a view of the
bottom 32 bits of the 64-bit AArch64 system register; writes in
AArch32 leave the top half unchanged. The most natural way to
model this is to have the state field in the CPU struct be a
64 bit value, and simply have the AArch32 TCG code operate on
a pointer to its lower half.
For aarch64-linux-user the only registers we need to share like
this are the thread-local-storage ones. Widen their fields to
64 bits and provide the 64 bit reginfo struct to make them
visible in AArch64 state. Note that minor cleanup of the AArch64
system register encoding space means We can share the TPIDR_EL1
reginfo but need split encodings for TPIDR_EL0 and TPIDRRO_EL0.
Since we're touching almost every line in QEMU that uses the
c13_tls* fields in this patch anyway, we take the opportunity
to rename them in line with the standard ARM architectural names
for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The common pattern for system registers in a 64-bit capable ARM
CPU is that when in AArch32 the cp15 register is a view of the
bottom 32 bits of the 64-bit AArch64 system register; writes in
AArch32 leave the top half unchanged. The most natural way to
model this is to have the state field in the CPU struct be a
64 bit value, and simply have the AArch32 TCG code operate on
a pointer to its lower half.
For aarch64-linux-user the only registers we need to share like
this are the thread-local-storage ones. Widen their fields to
64 bits and provide the 64 bit reginfo struct to make them
visible in AArch64 state. Note that minor cleanup of the AArch64
system register encoding space means We can share the TPIDR_EL1
reginfo but need split encodings for TPIDR_EL0 and TPIDRRO_EL0.
Since we're touching almost every line in QEMU that uses the
c13_tls* fields in this patch anyway, we take the opportunity
to rename them in line with the standard ARM architectural names
for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement an initial minimal set of EL0-visible system registers:
* NZCV
* FPCR
* FPSR
* CTR_EL0
* DCZID_EL0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The AArch64 equivalent of the traditional AArch32
cp15 coprocessor registers is the set of instructions
MRS/MSR/SYS/SYSL, which cover between them both true
system registers and the "operations with side effects"
such as cache maintenance which in AArch32 are mixed
in with other cp15 registers. Implement these instructions
to look in the cpregs hashtable for the register or
operation.
Since we don't yet populate the cpregs hashtable with
any registers with the "AA64" bit set, everything will
still UNDEF at this point.
MSR/MRS is the first user of is_jmp = DISAS_UPDATE, so
fix an infelicity in its handling where the main loop
was requiring the caller to do the update of PC rather
than just doing it itself.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The cpregs APIs used by the decoder (get_arm_cp_reginfo() and
cp_access_ok()) currently take either a CPUARMState* or an ARMCPU*.
This is problematic for the A64 decoder, which doesn't pass the
environment pointer around everywhere the way the 32 bit decoder
does. Adjust the parameters these functions take so that we can
copy only the relevant info from the CPUARMState into the
DisasContext and then use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preference to the older helpers. Stores only in this patch.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In preference to the older helpers. Loads only in this patch.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Now that we don't combine mem_index with operand size info,
we don't need to encode it. Which tidies many places that
access it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rather than add s->mem_index into a combined size+mem_index
argument, pass the context down. This will allow cleaning
up s->mem_index later.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The previous placement could result in duplicate logging while
still processing interrupts.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If a user or QMP client enter a bad syntax for the migrate
command in QMP/HMP, then the migrate command will never succeed
from that point on.
For example, if you enter:
(qemu) migrate tcp;0:4444
migrate: Parameter 'uri' expects a valid migration protocol
Then the migrate command will always fail from now on:
(qemu) migrate tcp:0:4444
migrate: There's a migration process in progress
The problem is that qmp_migrate() sets the migration status to
MIG_STATE_SETUP and doesn't reset it on syntax error. This bug
was introduced by commit 29ae8a4133.
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Replace assert_no_error() usages with the error_abort system.
&error_abort is passed into API calls to signal to the Error sub-system
that any errors are fatal. Removes need for caller assertions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add a special Error * that can be passed to error handling APIs to
signal that any errors are fatal and should abort QEMU. There are two
advantages to this:
- allows for brevity when wishing to assert success of Error **
accepting APIs. No need for this pattern:
Error * local_err = NULL;
api_call(foo, bar, &local_err);
assert_no_error(local_err);
This also removes the need for _nofail variants of APIs with
asserting call sites now reduced to 1LOC.
- SIGABRT happens from within the offending API. When a fatal error
occurs in an API call (when the caller is asserting sucess) failure
often means the API itself is broken. With the abort happening in the
API call now, the stack frames into the call are available at debug
time. In the assert_no_error scheme the abort happens after the fact.
The exact semantic is that when an error is raised, if the argument
Error ** matches &error_abort, then the abort occurs immediately. The
error messaged is reported.
For error_propagate, if the destination error is &error_abort, then
the abort happens at propagation time.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add two commands that are the monitor counterparts of -object. The commands
have the same Visitor-based implementation, but use different kinds of
visitors so that the HMP command has a DWIM string-based syntax, while
the QMP variant accepts a stricter JSON-based properties dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The file descriptor is never initialized to -1, which makes rng-random
close stdin if an object is created and immediately destroyed. If we
change it to -1, we also need to protect qemu_set_fd_handler from
receiving a bogus file descriptor.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Update the generic cpreg support code to also handle AArch64:
AArch64-visible registers coexist in the same hash table with
AArch32-visible ones, with a bit in the hash key distinguishing
them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
define_one_arm_cp_reg_with_opaque() has a set of nested loops which
insert a cpreg entry into the hashtable for each of the possible
opc/crn/crm values allowed by wildcard specifications. We're about
to add an extra loop to this nesting, so pull the core of the loop
(which adds a single entry to the hashtable) out into its own
function for clarity.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
cgcc reported a duplicate initialisation. Mainstone includes a matrix
keyboard where two different positions map to 'space'.
QEMU uses the reversed mapping and does not map 'space' to two different
matrix positions.
Some other keys are either missing or might be mapped wrongly (cf. Linux
kernel code). Don't fix these until someone can test them with real
hardware, but add TODO comments.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mapping is a hardware feature, so it is relatively constant.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The row and column values use only a very limited range (-1 ... 7),
so a byte value is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It is possible to pre-define a character device with the -chardev option
and reference its id as serial device. The man page does not mention this
feature.
Use case: Use stdio as serial, but do not terminate VM on Ctrl-C
-chardev stdio,id=mystdio,signal=off -serial chardev:mystdio
Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The help message uses $python and displays its value, so that macro
should be tested and set early.
With this modification, configure --help displays the correct value
(usually python -B) and no longer creates several *.pyc files.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the new form most lines of the code now look like the final output:
there is no leading echo command and the lines are shorter.
The resulting output is nearly identical: the only difference is a blank
character which was deliberately removed:
@@ -8,7 +8,7 @@
--interp-prefix=PREFIX where to find shared libraries, etc.
use %M for cpu name [/usr/gnemul/qemu-%M]
--target-list=LIST set target list (default: build everything)
- Available targets: alpha-softmmu arm-softmmu
+ Available targets: alpha-softmmu arm-softmmu
cris-softmmu i386-softmmu lm32-softmmu m68k-softmmu
microblaze-softmmu microblazeel-softmmu mips-softmmu
mips64-softmmu mips64el-softmmu mipsel-softmmu
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Once upon a time, the error message was:
qemu: -device nonexistant: Device "nonexistant" not found. Try -device '?' for a list.
But progress marches on, and conversion to QError (commit 0204276)
changed it into:
Invalid parameter 'driver'
Try with argument '?' for a list.
Progress didn't stop there, of course. After a couple of iterations,
we arrived at the current message (commit 6acbe4c):
qemu: -device nonexistant: Parameter 'driver' expects device type
Mission accomplished: this is complete mush.
We've since abandoned our quest for "rich" error objects, fortunately
before it turned all error messages into mush. Time to undo the
damage to this one. Make it:
qemu: -device nonexistant: nonexistant is not a valid device model name
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Convert 'init' function to QOM's 'realize' for ioapic and kvm-ioapic.
Change variable 'ioapic_no' from static to global. Then we can drop
the 'instance_no' function argument.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some cleanups:
* ioapic_common.c: Rename 'register_types' to 'ioapic_common_register_types'
* Replace inline 'DEVICE(s)' with local 'DeviceState *dev' variable
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Convert 'init' function to QOM's 'realize' for apic, kvm/apic and
xen/xen_apic.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Do some cleanup, including:
1. Remove DO_UPCAST() for APICCommonState
2. Change DeviceState pointers from 'd' to 'dev', better to understand
3. Rename 'register_types' to specifically 'apic_common_register_types'
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Same reasoning as commit 02a5c4c974
("qdev: Drop misleading qdev_free() function"). The qbus_free()
function removes the child from the namespace and decrements the
reference count. It does not, however, guarantee to free the child
since the refcount may still be held.
Just call object_unparent() directly.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We should not modify the type hash table while it is being iterated on.
Assert that it does not happen.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add basic regression testing for QOM Interface usage.
Test checks casting to interface type/class for following cases:
- interface implementation in leaf class
- interface implementation in intermediate (parent) class
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There should be no need to look up nor enumerate the interface "types",
whose "classes" are really just vtables. Just create the types and
add them to the interface list of the parent type.
Interfaces not registering their type anymore means that accessing
superclass::interface by type name will fail when initializing
subclass::interface. Thus, we need to pre-initialize the subclass's
parent_type field before calling type_initialize. Apart from this, the
interface "types" should never be used and thus it is harmless to leave
them out of the hashtable.
Further, the interface types had a bug with interfaces that are
inherited from a superclass: The implementation type name was wrong
(for example it was subclass::superclass::interface rather than
just subclass::interface). This patch fixes this as well.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The object-cast and class-cast caches cannot be shared because class
caching is conditional on the target type not being an interface and
object caching is unconditional. Leads to a bug when a class cast
to an interface follows an object cast to the same interface type:
FooObject = FOO(obj);
FooClass = FOO_GET_CLASS(obj);
Where TYPE_FOO is an interface. The first (object) cast will be
successful and cache the casting result (i.e. TYPE_FOO will be cached).
The second (class) cast will then check the shared cast cache
and register a hit. The issue is, when a class cast hits in the cache
it just returns a pointer cast of the input class (i.e. the concrete
class).
When casting to an interface, the cast itself must return the
interface class, not the concrete class. The implementation of class
cast caching already ensures that the returned cast result is only
a pointer cast before caching. The object cast logic however does
not have this check.
Resolve by just splitting the object and class caches.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Nathan Rossi <nathan.rossi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Ask users of DEFINE_PROP_PTR() to set
cannot_instantiate_with_device_add_yet, or explain why it's not
needed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Pointer properties can be set only by code, not by device_add. A
device with a pointer property can work with device_add only when the
property may remain null.
This is the case for property "interrupt_vector" of device
"etraxfs,pic". Add a comment there.
Set cannot_instantiate_with_device_add_yet for the other devices with
pointer properties, with a comment explaining why.
Juha Riihimäki and Peter Maydell deserve my thanks for making "pointer
property must not remain null" blatantly obvious in the OMAP devices.
Only device "smbus-eeprom" is actually changed. The others are all
sysbus devices, which get cannot_instantiate_with_device_add_yet set
in their abstract base's class init function. Setting it again in
their class init function is technically redundant, but serves as
insurance for when sysbus devices become available with device_add,
and as documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for ETRAX)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Watch this:
$ upstream-qemu -nodefaults -S -display none -monitor stdio
QEMU 1.7.50 monitor - type 'help' for more information
(qemu) device_add rng-egd
/work/armbru/qemu/qdev-monitor.c:491:qdev_device_add: Object 0x2089b00 is not an instance of type device
Aborted (core dumped)
Crashes because "rng-egd" exists, but isn't a subtype of TYPE_DEVICE.
Broken in commit 18b6dad.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Features family, model, stepping, level, hv_spinlocks are treated similarly
when passed from command line, so it's not necessary to handle each of them
individually. Collapse them to one catch-all branch which will treat
any not explicitly handled feature in format 'foo=val'.
Any unknown feature will be rejected by property setter so there is no
need to check for unknown feature in cpu_x86_parse_featurestr(), therefore
it's replaced by above mentioned catch-all handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Features check, enforce, hv_relaxed and hv_vapic are treated as boolean
set to 'on' when passed from command line, so it's not necessary to
handle each of them separately. Collapse them to one catch-all branch
which will treat any feature in format 'foo' as boolean set to 'on'.
Any unknown feature will be rejected by CPU property setter so there is no
need to check for unknown feature in cpu_x86_parse_featurestr(), therefore
it's replaced by above mentioned catch-all handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* Additionally convert check_cpuid & enforce_cpuid to bool and make them
members of X86CPU
* Make 'enforce' feature independent from 'check'
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace growing numbers of inline x86_env_get_cpu() with x86_cpu variable.
Reviewed-by: Chen Fan <chen.fan@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Implement FMOV, ie non-converting moves between general purpose
registers and floating point registers. This is a subtype of
the floating point <-> integer instruction class.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add a top level decoder skeleton for FP instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add decoding for the exception generating instructions, and implement
SVC (syscalls) and BRK (software breakpoint).
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Data-processing (3 source)"
family of instructions, namely MADD, MSUB, SMADDL, SMSUBL, SMULH,
UMADDL, UMSUBL, UMULH.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the non-carry forms of addition and subtraction
(immediate, extended register and shifted register).
This includes the code to calculate NZCV if the instruction
calls for setting the flags.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the pre/post-index ld/st forms with immediate
offsets as well as the un-scaled immediate form (which are all
variations on the same 9-bit immediate instruction form).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch support the basic load and store pair instructions and
includes the generic helper functions:
* do_gpr_st()
* do_fp_st()
* do_gpr_ld()
* do_fp_ld()
* read_cpu_reg_sp()
* gen_check_sp_alignment()
The last function gen_check_sp_alignment() is a NULL op currently but
put in place to make it easy to add SP alignment checking later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
commit 5ce4f35781
"target-arm: A64: add set_pc cpu method"
introduces an array aarch64_cpus which is zero
size if this code is built without CONFIG_USER_ONLY.
In particular an attempt to iterate over this array produces a warning
under gcc 4.8.2:
CC aarch64-softmmu/target-arm/cpu64.o
/scm/qemu/target-arm/cpu64.c: In function ‘aarch64_cpu_register_types’:
/scm/qemu/target-arm/cpu64.c:124:5: error: comparison of unsigned
expression < 0 is always false [-Werror=type-limits]
for (i = 0; i < ARRAY_SIZE(aarch64_cpus); i++) {
^
cc1: all warnings being treated as errors
This is the result of ARRAY_SIZE being an unsigned type,
causing "i" to be promoted to unsigned int as well.
As zero size arrays are a gcc extension, it seems
cleanest to add a dummy element with NULL name,
and test for it during registration.
We'll be able to drop this when we add more CPUs.
Cc: Alexander Graf <agraf@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Make the 32bit pci hole start at end of ram, so all possible address
space is covered.
We used to try and make addresses aligned so they are easier to cover
with MTRRs, but since they are cosmetic on KVM, this is probably not
worth worrying about.
Of course the firmware can use less than that. Leaving space unused is
no problem, mapping pci bars outside the hole causes problems though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Don't duplicate the array length computation in the memset()
when plain sizeof() can produce the correct results.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The size of tlb_table is 4k on a 64-bit host. For overwriting
memory at this size, cacheline tricks can help.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 6ef4716 cleaned up parsing of -boot option argument, but
accidentally dropped parameter strict. It should have been updated
exactly like parameter menu. Do that.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When we're running in non-64bit mode with qemu-system-x86_64 we can
still end up with virtual addresses that are above the 32bit boundary
if a segment offset is set up.
GNU Hurd does exactly that. It sets the segment offset to 0x80000000 and
puts its EIP value to 0x8xxxxxxx to access low memory.
This doesn't hit us when we enable paging, as there we just mask away the
unused bits. But with real mode, we assume that vaddr == paddr which is
wrong in this case. Real hardware wraps the virtual address around at the
32bit boundary. So let's do the same.
This fixes booting GNU Hurd in qemu-system-x86_64 for me.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
I also removed two hyphens in the same comment.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Post-order is the only sensible direction for the reset signals.
For example, suppose pre-order is used and the parent has some data
structures that cache children state (for example a list of active
requests). When the reset method is invoked on the parent, these caches
could be in any state.
If post-order is used, on the other hand, these will be in a known state
when the reset method is invoked on the parent.
This change means that it is no longer possible to block the visit of
the devices, so the callback is changed to return void. This is not
a problem, because PCI was returning 1 exactly in order to achieve the
same ordering that this patch implements.
PCI can then rely on the qdev core having sent a "reset signal" (whatever
that means) to the device, and only do the PCI-specific initialization
with pci_do_device_reset.
MST: fixed up virtio-ccw
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Resetting should be done in post-order, not pre-order. However,
qdev_walk_children and qbus_walk_children do not allow this. Fix
it by adding two extra arguments to the functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_device_reset will deassert the INTX pins, and this will make the
irq_count array all-zeroes. Check that this is the case, and remove
the existing loop which might even unsync irq_count and irq_state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qbus_reset_all can be used instead. There is no semantic change
because pcibus_reset returns 1 and takes care of the device
tree traversal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix bogus CPU hotplug GPE handler.
Make Q35 CPU hotplug GPE handler match PIIX4 one, since
CPU hotplug event is triggered by GPE0.2 register.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it fixes IRQ storm since guest isn't able to lower SCI IRQ
after it has been handled when it clears GPE event.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... and rename it into acpi_update_sci() since it changes
SCI on only on PM registers status.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hardcoded GPE0 mask isn't really needed. Since GPE0_STS initialized
with all bits cleared and only QEMU itself can set bits there (i.e.
guest can only clear bits in it). So guest can't triger SCI
by setting _STS & _EN bits and there is not reason to mask out not
supported _STS bits since they shouldn't be set by QEMU in the first
place.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check whether the firmware is not hidden by other memory regions.
Qemu is started in paused mode: it shouldn't try to interpret generated
garbage.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The blob is 64K in size and contains 0x00..0xFF repeatedly.
The client code added to main() wouldn't make much sense in the long term.
It helps with debugging and it silences gcc about create_blob_file() being
unused, and we'll replace it in the next patch anyway.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current two GTest cases, /i440fx/defaults and /i440fx/pam can share a
qemu process, but the next two cases will need dedicated instances. It is
messy (and order-dependent) to dynamically configure GTest cases one by
one to start, stop, or keep the current qtest (*); let's just have each
GTest work with its own qtest. The performance difference should be
negligible.
(*) As g_test_run() can be invoked at most once per process startup, and
it runs GTest cases in sequence, we'd need clumsy data structures to
control each GTest case to start/stop/keep the qemu instance. Or, we'd
have to code the same information into the test methods themselves, which
would make them even more order-dependent.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similarly to commit 1d9358e6
("libqtest: New qtest_end() to go with qtest_start()").
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch allows the user to usefully specify
-drive file=img_1,if=pflash,format=raw,readonly \
-drive file=img_2,if=pflash,format=raw
on the command line. The flash images will be mapped under 4G in their
reverse unit order -- that is, with their base addresses progressing
downwards, in increasing unit order.
(The unit number increases with command line order if not explicitly
specified.)
This accommodates the following use case: suppose that OVMF is split in
two parts, a writeable host file for non-volatile variable storage, and a
read-only part for bootstrap and decompressible executable code.
The binary code part would be read-only, centrally managed on the host
system, and passed in as unit 0. The variable store would be writeable,
VM-specific, and passed in as unit 1.
00000000ffe00000-00000000ffe1ffff (prio 0, R-): system.flash1
00000000ffe20000-00000000ffffffff (prio 0, R-): system.flash0
(If the guest tries to write to the flash range that is backed by the
read-only drive, pflash_update() is never called; various flash
programming/erase errors are returned to the guest instead. See the
callers of pflash_update(), and the initialization of "pfl->ro", in
"hw/block/pflash_cfi01.c".)
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Map 3G (i440fx) of memory below 4G, so the RAM pieces
are nicely aligned to gigabyte borders.
Keep old memory layout for (a) old machine types and (b) in case all
memory fits below 4G and thus we don't have to split RAM into pieces
in the first place. The later makes sure this change doesn't take
away memory from 32bit guests.
So, with i440fx and up to 3.5 GB of memory, all of it will be mapped
below 4G. With more than 3.5 GB of memory 3 GB will be mapped below
4G and the remaining amount will be mapped above 4G.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Such devices have always been unavailable and omitted from the list of
available devices shown by device_add help. Until commit 18b6dad
silently broke the former, setting up nasty traps for unwary users,
like this one:
$ qemu-system-x86_64 -nodefaults -monitor stdio -display none
QEMU 1.6.50 monitor - type 'help' for more information
(qemu) device_add apic
Segmentation fault (core dumped)
I call that a regression. Fix it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Drop it when there's no obvious reason why device_add could not work.
Else keep and document why.
* isa-fdc: drop
* i8042: drop, even though its I/O base is hardcoded (because you
could conceivably still add one to a board that has none), and even
though PC board code wires up the A20 line (because that wiring is
optional)
* port92: keep because it needs additional wiring by port92_init()
* mc146818rtc: keep because it needs to be wired up by rtc_init()
* m48t59_isa: keep because needs to be wired up by m48t59_init_isa()
* isa-pit, kvm-pit: keep (in their abstract base pic-common) because
the PIT needs additional wiring by board code, depending on HPET
presence
* pcspk: keep because of pointer property pit, and because realize
sets global pcspk_state
* vmmouse: keep because of pointer property ps2_mouse
* vmport: keep because realize sets global port_state
* isa-i8259, kvm-i8259: keep (in their abstract base pic-common),
because the PICs' IRQ input lines are set up by board code, and the
wiring of the slave to the master is hard-coded in device model code
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A VT82C686B southbridge has multiple functions. We model each
function as a separate qdev. One of them need some special wiring set
up in mips_fulong2e_init() to work: the ISA bridge at 05.0.
The IDE controller at 05.1 (via-ide) has always had
cannot_instantiate_with_device_add_yet set, but there is no obvious
reason why device_add could not work for them. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A PIIX3/PIIX4 southbridge has multiple functions. We model each
function as a separate qdev. Two of them need some special wiring set
up in pc_init1() or mips_malta_init() to work: the ISA bridge at 01.0,
and the SMBus controller at 01.3.
The IDE controller at 01.1 (piix3-ide, piix3-ide-xen, piix4-ide) has
always had cannot_instantiate_with_device_add_yet set, but there is no
obvious reason why device_add could not work for them. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
An ICH9 southbridge contains several PCI devices, some of them with
multiple functions. We model each function as a separate qdev. Two
of them need some special wiring set up in pc_q35_init() to work: the
LPC controller at 00:1f.0, and the SMBus controller at 00:1f.3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Many PCI host bridges consist of a sysbus device and a PCI device.
You need both for the thing to work. Arguably, these bridges should
be modelled as a single, composite devices instead of pairs of
seemingly independent devices you can only use together, but we're not
there, yet.
Since the sysbus part can't be instantiated with device_add, yet,
permitting it with the PCI part is useless. We shouldn't offer
useless options to the user, so let's set
cannot_instantiate_with_device_add_yet for them.
It's already set for Bonito, Grackle, i440FX and Raven. Document why.
Set it for the others: dec-21154, e500-host-bridge, gt64120_pci, mch,
pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp,
uni-north-internal-pci, uni-north-pci, and versatile_pci_host.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
device_add plugs devices into suitable bus. For "real" buses, that
actually connects the device. For sysbus, the connections need to be
made separately, and device_add can't do that. The device would be
left unconnected, and could not possibly work.
Quite a few, but not all sysbus devices already set
cannot_instantiate_with_device_add_yet in their class init function.
Set it in their abstract base's class init function
sysbus_device_class_init(), and remove the now redundant assignments
from device class init functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In an ideal world, machines can be built by wiring devices together
with configuration, not code. Unfortunately, that's not the world we
live in right now. We still have quite a few devices that need to be
wired up by code. If you try to device_add such a device, it'll fail
in sometimes mysterious ways. If you're lucky, you get an
unmysterious immediate crash.
To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad. The device model is still omitted from
help, but is available anyway.
Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.
This commit clarifies no_user's purpose. Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy. While there, make it
bool.
Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale. The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.
With that done, the regression fix is hopefully acceptable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The recent VSX patches broken compilation of QEMU when configurated
with --enable-debug, as it was treating "target long" TCG variables
as "i64" which is not true for 32bit targets.
This patch fixes all the places that the compiler has found to use
the correct variable type and if necessary manually cast.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Linux prefers WRITE SAME to UNMAP if the limits are zero, and WRITE
SAME does not discard anything unless the device can guarantee that
the resulting block is zero.
Setting the maximum unmap block and descriptor counts to non-zero
makes Linux choose UNMAP and fixes thin provisioning on glusterfs.
While the maximum unmap block count can have some effect on performance,
the (suggested) maximum number of descriptors is not particularly
important so I didn't add a customization option. SCSI drivers are
used to online firmware updates so I'm not yet adding versioning support
for SCSI, but we're probably getting close to the point when it's worth
thinking about it.
Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Patch queue for s390 - 2013-12-18
This covers mostly minor bug fixes and implements the SIGP START
hypercall which allows to start a remote CPU without changing its
state.
Cornelia Huck (1):
s390x/kvm: Fix diagnose handling.
Thomas Huth (7):
s390x/kvm: Removed duplicated SIGP defines
s390x/kvm: Removed s390_store_status stub
s390x/kvm: Fix coding style in handle_sigp()
s390x/kvm: Implemented SIGP START
s390x/kvm: Simplified the calculation of the SIGP order code
s390x/kvm: Fixed condition code for unknown SIGP orders
s390x/ioinst: CHSC has to set a condition code
* tag 'signed-s390-for-upstream' of git://github.com/agraf/qemu:
s390x/ioinst: CHSC has to set a condition code
s390x/kvm: Fixed condition code for unknown SIGP orders
s390x/kvm: Simplified the calculation of the SIGP order code
s390x/kvm: Implemented SIGP START
s390x/kvm: Fix coding style in handle_sigp()
s390x/kvm: Removed s390_store_status stub
s390x/kvm: Removed duplicated SIGP defines
s390x/kvm: Fix diagnose handling.
The comments apply to 8-bit stores, not 8-byte stores.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We support top == active for commit now, remove the check and add an
assertion here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Factor out commit test common logic into super class, and update test
of committing the active image.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If active is top, it will be mirrored to base, (with block/mirror.c
code), then the image is switched when user completes the block job.
QMP documentation is updated.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit_active_start is implemented in block/mirror.c, It will create a
job with "commit" type and designated base in block-commit command. This
will be used for committing active layer of device.
Sync mode is removed from MirrorBlockJob because there's no proper type
for commit. The used information is is_none_mode.
The common part of mirror_start and commit_active_start is moved to
mirror_start_job().
Fix the comment wording for commit_start.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows setting the base before entering mirror_run, commit will
make use of it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Let reference count manage target and don't call bdrv_close here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 75884afd5c ("virtio-blk: Convert to
QOM realize") dropped a duplicate error_report() call. Now we no longer
get the following error message twice:
QEMU_PROG: -drive if=virtio: Device initialization failed.
Update qemu-iotests 051.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This improves vmdk_create to use bdrv_* functions to replace qemu_open
and other fd functions. The error handling are improved as well. One
difference is that bdrv_pwrite will round up buffer to sectors, so for
description file, an extra bdrv_truncate is used in the end to drop
inding zeros.
Notes:
- A bonus bug fix is correct endian is used in initializing GD entries.
- ROUND_UP and DIV_ROUND_UP are used where possible.
I tested that new code produces exactly the same file as previously.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMFS extent line in description file should be with 4 fields:
RW <size> VMFS "file-name.vmdk"
Check the number explicitly and report error if offset is appended as
FLAT, which should be invalid format.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The man page for qemu-img, and the qemu-doc, did not mention VHDX
as a supported format. This adds in reference to VHDX in those
documents.
[Stefan Weil <sw@weilnetz.de> suggested s/Block Size/Block size/ for
consistency. I have made this change.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If there is a dirty log file to be replayed in a VHDX image, it is
replayed in .vhdx_open(). However, if the file is opened read-only,
then a somewhat cryptic error message results.
This adds a more helpful error message for the user. If an image file
contains a log to be replayed, and is opened read-only, the user is
instructed to run 'qemu-img check -r all' on the image file.
Running qemu-img check -r all will cause the image file to be opened
r/w, which will replay the log file. If a log file replay is detected,
this is flagged, and bdrv_check will increase the corruptions_fixed
count for the image.
[Fixed typo in error message that was pointed out by Eric Blake
<eblake@redhat.com>.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Function iscsi_read10_task got additional parameters starting with version
libiscsi 1.5.0.
libiscsi 1.4.0 is still widely used (Debian wheezy, jessie and other Linux
distributions currently provide packages for QEMU which use it), so we
still need support for this older API.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We are moving boldly on to QEMU 2.0 in the next release. Some patches
written at a time where we assumed 1.8 would be the next version number
managed to sneak in.
s/1.8/2.0/ in qapi-schema.json
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When running qcow2 over sheepdog, we might meet following problem
qemu-system-x86_64: shrinking is not supported
And cause IO errors to Guest. This is because we abuse bs->total_sectors, which
is manipulated by generic block layer and race with sheepdog code.
We should directly check if offset > vdi_size to dynamically enlarge the volume
instead of 'offset > bs->total_sectors', which will cause problem when following
case happens:
vdi_size > offset > bs->total_sectors
# then trigger sd_truncate() to shrink the volume wrongly.
Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reported-by: Hadrien KOHL <hadrien.kohl@gmail.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Patch queue for ppc - 2013-12-20
Alexander Graf (3):
PPC: Use default pci bus name for grackle and heathrow
roms: Flush icache when writing roms to guest memory
PPC: Add VSX to hflags
Alexey Kardashevskiy (5):
powerpc: add PVR mask support
target-ppc: move POWER7+ to a separate family
spapr-rtas: replace return code constants with macros
spapr-rtas: add ibm, (get|set)-system-parameter
spapr: make sure RMA is in first mode of first memory node
Greg Kurz (1):
target-ppc: add stubs for KVM breakpoints
Paolo Bonzini (1):
spapr: tie spapr-nvram to -pflash
Paul Mackerras (1):
spapr: limit numa memory regions by ram size
Peter Crosthwaite (2):
device_tree: s/qemu_devtree/qemu_fdt globally
device_tree: qemu_fdt_setprop: Rename val_array arg
Tom Musta (19):
Declare and Enable VSX
Add MSR VSX and Associated Exception
Add VSX Instruction Decoders
Add VSR to Global Registers
Add lxvd2x
Add stxvd2x
Add xxpermdi
Add lxsdx
Add lxvdsx
Add lxvw4x
Add stxsdx
Add stxvw4x
Add VSX Scalar Move Instructions
Add VSX Vector Move Instructions
Add Power7 VSX Logical Instructions
Add xxmrgh/xxmrgl
Add xxsel
Add xxspltw
Add xxsldwi
* agraf/tags/signed-ppc-for-upstream: (32 commits)
spapr: limit numa memory regions by ram size
spapr: make sure RMA is in first mode of first memory node
device_tree: qemu_fdt_setprop: Rename val_array arg
device_tree: s/qemu_devtree/qemu_fdt globally
PPC: Add VSX to hflags
Add xxsldwi
Add xxspltw
Add xxsel
Add xxmrgh/xxmrgl
Add Power7 VSX Logical Instructions
Add VSX Vector Move Instructions
Add VSX Scalar Move Instructions
roms: Flush icache when writing roms to guest memory
spapr: tie spapr-nvram to -pflash
PPC: Use default pci bus name for grackle and heathrow
spapr-rtas: add ibm, (get|set)-system-parameter
spapr-rtas: replace return code constants with macros
target-ppc: move POWER7+ to a separate family
Add stxvw4x
Add stxsdx
...
This makes sure that all NUMA memory blocks reside within RAM or
have zero length.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The SPAPR specification says that the RMA starts at the LPAR's logical
address 0 and is the first logical memory block reported in
the LPAR’s device tree.
So SLOF only maps the first block and that block needs to span
the full RMA.
This makes sure that the RMA area is where SLOF expects it.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Looking at the implementation, this doesn't really have a lot to do
with arrays. Its just a pointer to a buffer and is passed through
to the wrapped fn (qemu_fdt_setprop) unchanged. So rename to make it
consistent with libfdt, which in the wrapped function just calls it
"val".
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The qemu_devtree API is a wrapper around the fdt_ set of APIs.
Rename accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[agraf: also convert hw/arm/virt.c]
Signed-off-by: Alexander Graf <agraf@suse.de>
We generate different code depending on whether MSR_VSX is set or
clear, so it needs to be part of our hflags too which indicate whether
we're still in the same translation block cache bucket.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Shift Left Double by Word Immediate
(xxsldwi) instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Splat Word (xxsplatw) instruction.
This is the first instruction to use the UIM immediate field
and consequently a decoder is also added.
V2: reworked implementation per Richard Henderson's comments.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Select (xxsel) instruction.
The xxsel instruction has four VSR operands. Thus the xC
instruction decoder is added.
The xxsel instruction is massively overloaded in the opcode
table since only bits 26 and 27 are opcode bits. This
overloading is done in matrix fashion with two macros
(GEN_XXSEL_ROW and GEN_XX_SEL).
V2: (1) eliminated unecessary XXSEL macro (2) tighter implementation
using tcg_gen_andc_i64.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Merge High Word and VSX Merge Low Word
instructions.
V2: Now implemented using deposit (per Richard Henderson's comment)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX logical instructions that are defined
by the Version 2.06 Power ISA (aka Power7):
- xxland
- xxlandc
- xxlor
- xxlxor
- xxlnor
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX scalar move instructions:
- xsabsdp (Scalar Absolute Value Double-Precision)
- xsnabspd (Scalar Negative Absolute Value Double-Precision)
- xsnegdp (Scalar Negate Double-Precision)
- xscpsgndp (Scalar Copy Sign Double-Precision)
A common generator macro (VSX_SCALAR_MOVE) is added since these
instructions vary only slightly from each other.
Macros to support VSX XX2 and XX3 form opcodes are also added.
These macros handle the overloading of "opcode 2" space (instruction
bits 26:30) caused by AX and BX bits (29 and 30, respectively).
V3: Per feedback from Paolo Bonzini, moved the sign mask into a
temporary and used andc.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We use the rom infrastructure to write firmware and/or initial kernel
blobs into guest address space. So we're basically emulating the cache
off phase on very early system bootup.
That phase is usually responsible for clearing the instruction cache for
anything it writes into cachable memory, to ensure that after reboot we
don't happen to execute stale bits from the instruction cache.
So we need to invalidate the icache every time we write a rom into guest
address space. We do not need to do this for every DMA since the guest
expects it has to flush the icache manually in that case.
This fixes random reboot issues on e5500 (booke ppc) for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
spapr-nvram's drive property is currently connected to a non-existent
"-machine nvram=<drivename>" option. Instead, tie it to -pflash like
other non-volatile RAM devices. This provides the following possibilities
for adding a backend for the sPAPR non-volatile RAM:
* -pflash filename
* -drive if=pflash,file=filename,format=raw,...
* -drive if=none,file=filename,format=raw,id=foo,... -global spapr-nvram.drive=foo
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
There's no good reason to call our bus "pci" rather than let the default
bus name take over ("pci.0").
The big downside to calling it different from anyone else is that tools
that pass -device get confused. They are looking for a bus "pci.0" rather
than "pci".
To make life easier for everyone, let's just drop the name override.
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds very basic handlers for ibm,get-system-parameter and
ibm,set-system-parameter RTAS calls.
The only parameter handled at the moment is
"platform-processor-diagnostics-run-mode" which is always disabled and
does not support changing. This is expected to make
"ppc64_cpu --run-mode=1" happy.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: s/papameter/parameter/g]
Signed-off-by: Alexander Graf <agraf@suse.de>
So far POWER7+ was a part of POWER7 family. However it has a different
PVR base value so in order to support PVR masks, it needs a separate
family class.
This adds a new family class, PVR base and mask values and moves
Power7+ v2.1 CPU to a new family. The class init function is copied
from the POWER7 family.
This defines a firmware name for the new family as "PowerPC,POWER7+"
instead of previously used "PowerPC,POWER7" from the POWER7 family.
The reason for that is that the Sapphire firmware (a h0st firmware)
uses "PowerPC,POWER7+" already and since no specification defines
exactly the CPU nodes naming in the device tree, we better stay
in sync with the host firmware.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store VSX Vector Word*4 Indexed (stxvw4x)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store VSX Scalar Doubleword Indexed (stxsdx)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Vector Word*4 Indexed (lxvw4x)
instruction.
V2: changed to use deposit_i64 per Richard Henderson's review.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Vector Doubleword & Splat Indexed
(lxvdsx) instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Scalar Doubleowrd Indexed (lxsdx)
instruction.
The lower 8 bytes of the target register are undefined; this
implementation leaves those bytes unaltered.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the xxpermdi instruction. The instruction
uses bits 22, 23, 29 and 30 for non-opcode fields (DM, AX
and BX). This results in overloading of the opcode table
with aliases, which can be seen in the GEN_XX3FORM_DM
macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds VSX VSRs to the the list of global register indices.
More specifically, it adds the lower halves of the first 32 VSRs to
the list of global register indices. The upper halves of the first
32 VSRs are already defined via cpu_fpr[]. And the second 32 VSRs
are already defined via the cpu_avrh[] and cpu_avrl[] arrays.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds decoders for the VSX fields XT, XS, XA, XB and
DM. The first four are split fields and a general helper for
these types of fields is also added.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for the VSX bit of the PowerPC Machine
State Register (MSR) as well as the corresponding VSX Unavailable
exception.
The VSX bit is added to the defined bits masks of the Power7 and
Power8 CPU models.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the flag POWERPC_FLAG_VSX to the list of defined
flags and also adds this flag to the list of supported features of
the Power7 and Power8 CPUs. Additionally, the VSX instructions
are added to the list of TCG-enabled instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
IBM POWERPC processors encode PVR as a CPU family in higher 16 bits and
a CPU version in lower 16 bits. Since there is no significant change
in behavior between versions, there is no point to add every single CPU
version in QEMU's CPU list. Also, new CPU versions of already supported
CPU won't break the existing code.
This adds PVR value/mask support for KVM, i.e. for -cpu host option.
As CPU family class name for POWER7 is "POWER7-family", there is no need
to touch aliases.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The latest update to v3.13-rc3 (bf63839f) breaks the
ppc build with KVM:
kvm-all.o: In function `kvm_update_guest_debug':
kvm-all.c:1910: undefined reference to `kvm_arch_update_guest_debug'
kvm-all.o: In function `kvm_insert_breakpoint':
kvm-all.c:1937: undefined reference to `kvm_arch_insert_sw_breakpoint'
kvm-all.c:1945: undefined reference to `kvm_arch_insert_hw_breakpoint'
kvm-all.o: In function `kvm_remove_breakpoint':
kvm-all.c:1977: undefined reference to `kvm_arch_remove_sw_breakpoint'
kvm-all.c:1985: undefined reference to `kvm_arch_remove_hw_breakpoint'
kvm-all.o: In function `kvm_remove_all_breakpoints':
kvm-all.c:2009: undefined reference to `kvm_arch_remove_sw_breakpoint'
kvm-all.c:2006: undefined reference to `kvm_arch_remove_sw_breakpoint'
kvm-all.c:2017: undefined reference to `kvm_arch_remove_all_hw_breakpoints'
We need stubs until something gets implemented.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
target-arm queue:
* AES instruction support for 32 bit ARM
* pflash01: much better emulation of 2x16bit and similar configs
where multiple flash devices are banked together
* fixed CBAR handling on Zynq, Highbank
* initial AArch64 KVM control support
* first two chunks of patches for A64 instruction emulation
* new board: canon-a1100 (Canon DIGIC SoC)
* new board: cubieboard (Allwinner A10 SoC)
# gpg: Signature made Tue 17 Dec 2013 12:18:39 PM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Alexander Graf (14) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20131217: (62 commits)
MAINTAINERS: add myself to maintain allwinner-a10
hw/arm: add cubieboard support
hw/arm: add allwinner a10 SoC support
hw/intc: add allwinner A10 interrupt controller
hw/timer: add allwinner a10 timer
vmstate: Add support for an array of ptimer_state *
MAINTAINERS: Document 'Canon DIGIC' machine
hw/arm/digic: add NOR ROM support
hw/arm/digic: add UART support
hw/arm/digic: add timer support
hw/arm/digic: prepare DIGIC-based boards support
hw/arm: add very initial support for Canon DIGIC SoC
target-arm: A64: add support for logical (immediate) insns
target-arm: A64: add support for 1-src CLS insn
host-utils: add clrsb32/64 - count leading redundant sign bits
target-arm: A64: add support for bitfield insns
target-arm: A64: add support for 1-src REV insns
target-arm: A64: add support for 1-src RBIT insn
target-arm: A64: add support for 1-src data processing and CLZ
target-arm: A64: add support for 2-src shift reg insns
...
Message-id: 1387312160-12318-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
I missed to set the CC in the CHSC instruction when I refactored
the CC setting in the IO instructions with the following commit:
5d9bf1c07c
s390/ioinst: Moved the CC setting to the IO instruction handlers
This patch now restores the correct behaviour of CHSC by setting the
condition code 0 at the end of the instruction.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
If SIGP is called with an unknown order code, it has to return CC1
instead of CC3 and set the "invalid order" bit in the return status.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We've already got a helper function for calculating the
base/displacement of RS formatted instructions, so we can
get rid of the manual calculation of the SIGP order code.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The instruction intercept handler for diagnose used only the displacement
when trying to calculate the function code. This is only correct for base
0, however; we need to perform a complete base/displacement address
calculation and use bits 48-63 as the function code.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for C3.4.4 Logical (immediate),
which include AND, ANDS, ORR, EOR.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder, function renaming,
removed a TCG temp variable]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM: cleaned up some unnecessary code in logic_imm_decode_wmask
and added clarifying commentary on what it's actually doing.
Dropped an ext32u that's not needed if we've just done an AND.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
this patch introduces wrappers for the clrsb builtins,
which count the leading redundant sign bits.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the C5.6.147 RBIT instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder, use bswap64,
make RBIT part standalone from the rest of the patch,
splitting REV into a separate patch]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for decoding 1-src data processing insns,
and the first user, C5.6.40 CLZ (count leading zeroes).
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for decoding 2-src data processing insns,
and the first users, UDIV and SDIV.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder adding the 2-src decoding level,
always zero-extend result in 32bit mode]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation support for the EXTR instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted for new decoder, removed a few temporaries,
fixed the 32bit bug, added checks for more
unallocated cases]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the instructions described in
"C3.4.6 PC-rel. addressing" (ADR and ADRP).
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder structure]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the instructions described in "C3.5.10 Logical
(shifted register)".
We store the flags in the same locations as the 32 bit decoder.
This is slightly awkward when calculating 64 bit results, but seems
a better tradeoff than having to rework the whole 32 bit decoder
and also make 32 bit result calculation in A64 awkward.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: some refactoring to avoid hidden allocation of temps,
rework flags, use enums for shift types,
renaming of functions]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM: Use TCG's andc/orc/eqv ops rather than manually inverting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for the instruction group "C3.5.6
Conditional select": CSEL, CSINC, CSINV, CSNEG.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM: Improved code generated in the nomatch case as per RTH suggestions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the compare and branch insns,
CBZ and CBNZ.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder,
compare with immediate 0,
introduce read_cpu_reg to get the 0 extension on (!sf)]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the test and branch insns,
TBZ and TBNZ.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio:
adapted for new decoder
always compare with 0
remove a TCG temporary
]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the conditional branch (b.cond) instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder structure,
reused arm infrastructure for checking the flags]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement BR, BLR and RET. This is all of the 'unconditional
branch (register)' instruction category except for ERET
and DPRS (which are system mode only).
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: reimplemented on top of new decoder structure]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the B and BL instructions (PC relative branches and calls).
For convenience in managing TCG temporaries which might be generated
if a source register is the zero-register XZR, we provide a simple
mechanism for creating a new temp which is automatically freed at the
end of decode of the instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: renamed functions, adapted to new decoder layout]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Decode the various kinds of system instructions:
hints (HINT), which include NOP, YIELD, WFE, WFI, SEV, SEL
sync instructions, which include CLREX, DSB, DMB, ISB
msr_i, which move immediate to processor state field
sys, which include all SYS and SYSL instructions
msr, which move from a gp register to a system register
mrs, which move from a system register to a gp register
Provide implementations where they are trivial nops.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Provide a skeleton for a64 instruction decoding in translate-a64.c,
by dividing instructions into the classes defined by the
ARM Architecture Reference Manual(DDI0487A_a) section C3.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We will need helpers that only make sense with AArch64. Add
helper-a64.{c,h} files as stubs that we can fill with these
helpers in the following patches.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The information which AArch32 holds in the FPSCR is split for
AArch64 into two logically distinct registers, FPSR and FPCR.
Since they are carefully arranged to use non-overlapping bits,
we leave the underlying state in the same place, and provide
accessor functions which just update the appropriate bits
via vfp_get_fpscr() and vfp_set_fpscr().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When executing translation blocks we need to be able to recover
our program counter. Add a method to set it for AArch64 CPUs.
This covers user-mode, but for system mode emulation we will
need to check if the CPU is in an AArch32 execution state.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The A32/T32 gen_intermediate_code_internal() is complicated because it
has to deal with:
* conditionally executed instructions
* Thumb IT blocks
* kernel helper page
* M profile exception-exit special casing
None of these apply to A64, so putting the "this is A64 so
call the A64 decoder" check in the middle of the A32/T32
loop is confusing and means the A64 decoder's handling of
things like conditional jump and singlestepping has to take
account of the conditional-execution jumps the main loop
might emit.
Refactor the code to give A64 its own gen_intermediate_code_internal
function instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This commit adds support for booting a single AArch64 CPU by setting
appropriate registers. The bootloader includes placeholders for Board-ID
that are used to implement uniform indexing across different bootloaders.
Signed-off-by: Mian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-7-git-send-email-peter.maydell@linaro.org
[PMM:
* updated to use ARMInsnFixup style bootloader fragments
* dropped virt.c additions
* use runtime checks for "is this an AArch64 core" rather than ifdefs
* drop some unnecessary setting of registers in reset hook
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
For AArch64 we will obviously require a different set of
primary and secondary boot loader code fragments. However currently
we hardcode the offsets into the loader code where we must write
the entrypoint and other data into arm_load_kernel(). This makes it
hard to substitute a different loader fragment, so switch to a more
flexible scheme where instead of a raw array of instructions we use
an array of (instruction, fixup-type) pairs that indicate which
words need special action or data written into them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-6-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Enable KVM if the host and target CPU are both aarch64. Note
that host aarch64 + target arm is not valid for KVM acceleration:
the 64 bit kernel does not support the ioctl interface for
32 bit CPUs. 32 bit VMs on 64 bit hosts need to be created
using the 64 bit ioctl interface; when QEMU supports this it
will be on the arch64-softmmu target with a -cpu parameter for
a 32 bit CPU, which is still an aarch64/aarch64 combination
as far as configure is concerned.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Add the bare minimum set of functions needed for control of an
AArch64 KVM vcpu:
* CPU initialization
* minimal get/put register functions which only handle the
basic state of the CPU
Signed-off-by: Mian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-4-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled; most notably:
* code lives in kvm64.c rather than using #ifdefs
* support '-cpu host' rather than implicitly using whatever the
host's CPU is regardless of what the user requests
* fix bug attempting to get/set nonexistent X[31]
* fix bug writing 64 bit kernel pstate into uint32_t env field
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
The env->pstate field is a little odd since it doesn't strictly
speaking represent an architectural register. However it's convenient
for QEMU to use it to hold the various PSTATE architectural bits
in the same format the architecture specifies for SPSR registers
(since this is the same format the kernel uses for signal handlers
and the KVM register). Add some structure to how we deal with it:
* document what env->pstate is
* add some #defines for various bits in it
* add helpers for reading/writing it taking account of caching
of NZCV, and use them where appropriate
* reset it on startup
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Fix the CBAR initialisation by using the newly defined static property.
CBAR is now set before realization, so the intended value is now
actually used.
So I have kind of tested this. I booted an ARM kernel on Highbank with
the stock Highbank DTB. It doesn't boot (and I will be doing something
wrong), but before this patch I got this:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /workspaces/pcrost/public/linux2.git/arch/arm/mm/ioremap.c:301 __arm_ioremap_pfn_caller+0x180/0x198()
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.13.0-rc1-next-20131126-dirty #2
[<c0015164>] (unwind_backtrace) from [<c00118c0>] (show_stack+0x10/0x14)
[<c00118c0>] (show_stack) from [<c02bd5fc>] (dump_stack+0x78/0x90)
[<c02bd5fc>] (dump_stack) from [<c001f110>] (warn_slowpath_common+0x68/0x84)
[<c001f110>] (warn_slowpath_common) from [<c001f1f4>] (warn_slowpath_null+0x1c/0x24)
[<c001f1f4>] (warn_slowpath_null) from [<c0017c6c>] (__arm_ioremap_pfn_caller+0x180/0x198)
[<c0017c6c>] (__arm_ioremap_pfn_caller) from [<c0017cd8>] (__arm_ioremap_caller+0x54/0x5c)
[<c0017cd8>] (__arm_ioremap_caller) from [<c0017d10>] (__arm_ioremap+0x18/0x1c)
[<c0017d10>] (__arm_ioremap) from [<c03913c0>] (highbank_init_irq+0x34/0x8c)
[<c03913c0>] (highbank_init_irq) from [<c038c228>] (init_IRQ+0x28/0x2c)
[<c038c228>] (init_IRQ) from [<c03899ec>] (start_kernel+0x234/0x398)
[<c03899ec>] (start_kernel) from [<00008074>] (0x8074)
---[ end trace 3406ff24bd97382f ]---
Which disappears with this patch.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: fedec366aaa512d75093635f523d1dbcb3358361.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some processors (notably A9 within Highbank) define and use the
CP15 configuration base address (CBAR). This is vendor specific
so its best implemented as a CPU property (otherwise we would need
vendor specific child classes for every ARM implementation).
This patch prepares support for converting CBAR reset value to
a CPU property by moving the CP registration out of the CPU
init fn, as registration will need to happen at realize time
to pick up any property updates. The easiest way to do this
is via definition of a new ARM_FEATURE to flag the existence
of the register.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 9f697ef1e2ee60a3b9ef971a7f3bc3fa6752a9b7.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix NOR flash manufacturer and device ID reading. This now
properly takes into account device widths and device max widths
as required. The reading of these IDs uses the same max_width
dependent addressing as CFI queries.
The old code remains for chips that don't specify a device width,
as the new code relies on a device width being set in order to
properly operate. The existing code seems very broken.
Only ident0 and ident1 are used in the new code, as other fields
relate to the lock state of blocks in flash.
The VExpress flash configuration has been updated to match
the new code, as the existing definition was 'wrong' in order
to return the expected results with the broken device ID code.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-8-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change fixes the CFI query responses to handle NOR device
widths that are different from the bank width. Support is also
added for multi-width devices in a x8 configuration. This is
typically x8/x16 devices, but the CFI specification mentions
x8/x32 devices so those should be supported as well if they
exist.
The query response data is now replicated per-device in the bank,
and is adjusted for x16 or x32 parts configured in x8 mode.
The existing code is left in place for boards that have not
been updated to specify an explicit device_width. The VExpress
board has been updated in an earlier patch in this series so
this is the only board currently affected.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-7-git-send-email-roy.franz@linaro.org
[PMM: fixed a few formatting nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For handling CFI and device ID reads, we need to not only know the
width that a NOR flash device is configured for, but also its maximum
width. The maximum width addressing mode is used for multi-width
parts no matter which width they are configured for. The most common
case is x16 parts that also support x8 mode. When configured for x8
operation these devices respond to CFI and device ID requests differently
than native x8 NOR parts.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-6-git-send-email-roy.franz@linaro.org
[PMM: Added comment explaining the semantics of width vs device-width
vs max-device-width]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create vexpress specific pflash registration
function which properly configures the device-width
of 16 bits (2 bytes) for the NOR flash on the
vexpress platform. This change is required for
buffered flash writes to work properly.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-5-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we know how wide each flash device that makes up the bank is,
return status for each device in the bank. Leave existing code
that treats 32 bit wide banks as composed of two 16 bit devices as otherwise
we may break configurations that do not set the device_width propery.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-4-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The width of the devices that make up the flash interface
is required to mask certain commands, in particular the
write length for buffered writes. This length will be presented
to each device on the interface by the program writing the flash,
and the flash emulation code needs to be able to determine
the length of the write as recieved by each flash device.
The device-width defaults to the bank width which should
maintain existing behavior for platforms that don't need
this change.
This change is required to support buffered writes on the
vexpress platform that has a 32 bit flash interface with 2
16 bit devices on it.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-3-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_opts_parse() can always return NULL, even if the QemuOptsList.desc in
question would be trivial to satisfy (eg. because it's empty). For
example:
qemu_opts_parse()
opts_parse()
qemu_opts_create()
id_wellformed()
In practice:
$ .../qemu-system-x86_64 -acpitable id=3
qemu-system-x86_64: -acpitable id=3: Parameter 'id' expects an identifier
**
ERROR:vl.c:3491:main: assertion failed: (opts != NULL)
Aborted (core dumped)
$ .../qemu-system-x86_64 -smbios id=3
qemu-system-x86_64: -smbios id=3: Parameter 'id' expects an identifier
Segmentation fault (core dumped)
I checked all qemu_opts_parse() invocations (and all drive_def()
invocations too, because it blindly forwards the former's retval). Only
the two above examples look problematic.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1385658779-7529-1-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Collection of little cleanups anf bugfixes.
nbd patches in preparation of spice-nbd.
# gpg: Signature made Mon 16 Dec 2013 01:27:45 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
# By Marc-André Lureau (12) and Gerd Hoffmann (4)
# Via Gerd Hoffmann
* spice/tags/pull-spice-1:
spice: stop server for qxl hard reset
spice: move spice_server_vm_{start,stop} calls into qemu_spice_display_*()
spice: move qemu_spice_display_*() from spice-graphics to spice-core
nbd: avoid uninitialized warnings
nbd: finish any pending coroutine
nbd: make nbd_client_session_close() idempotent
nbd: pass export name as init argument
nbd: don't change socket block during negotiate
Split nbd block client code
spice-char: implement chardev port event
char: add qemu_chr_fe_event()
include: add missing config-host.h include
qmp_change_blockdev() remove unused has_format
spice-char: remove unused field
vscclient: do not add a socket watch if there is not data to send
spice: flip streaming video mode to off by default
Block patches
# gpg: Signature made Fri 13 Dec 2013 09:47:03 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
# By Peter Lieven (2) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony:
blkdebug: Use QLIST_FOREACH_SAFE to resume IO
qemu-img: make progress output more accurate during convert
block: expect get_block_status errors in bdrv_make_zero
block/vvfat: Fix compiler warnings for OpenBSD
qapi-schema.json: Change 1.8 reference to 2.0
sheepdog: check if '-o redundancy' is passed from user
Message-id: 1386956943-19474-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
this fixes a potential segfault and performance regression.
If the coroutine is reentered directly in the iscsi_co_generic_cb
iscsi_process_{read,write} are interrupted and reentered any
time later. One the one hand this could happen after an iscsi_close
where the iscsi context is already gone (segfault). On the
other hand this limits the number of processed callbacks
in each aio_dispatch to one (potential performance regression).
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hard reset can happen at any time. We should be able to put qxl into a
known-good state no matter what. Stop spice server thread for reset so
it can't be confused by fetching stale commands lingering around in the
rings while we reset is ongoing.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no need to keep the export name around, and it seems a better
fit as an argument in the init() call.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The caller might handle non-blocking using coroutine. Leave the choice
to the caller to use a blocking or non-blocking negotiate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Teach the chardev frontend to send event. This is used by the Spice port
chardev currently.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Video streaming detection heuristics in spice-server have problems
keeping modern desktop animations (as done by gnome shell) and real
video playback apart. This leads to jpeg compression artefacts on
your desktop, due to spice using mjpeg to send what it thinks is
a video stream.
Turn off video detection by default to avoid these artifacts.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
acpi.pci,pc,memory core fixes
Most notably this includes changes to exec to support
full 64 bit addresses.
This also flushes out patches that got queued during 1.7 freeze.
There are new tests, and a bunch of bug fixes all over the place.
There are also some changes mostly useful for downstreams.
I'm also listing myself as pc co-maintainer. I'm doing this reluctantly,
but this seems to be necessary to make sure patches are not lost or delayed too
much, and posting the MAINTAINERS patch did not seem to make anyone else
volunteer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 11 Dec 2013 10:21:51 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (14) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony: (28 commits)
pc: use macro for HPET type
hpet: fix build with CONFIG_HPET off
acpi unit-test: adjust the test data structure for better handling
acpi unit-test: load and check facs table
exec: separate sections and nodes per address space
memory.c: bugfix - ref counting mismatch in memory_region_find
hpet: enable to entitle more irq pins for hpet
hpet: inverse polarity when pin above ISA_NUM_IRQS
pci: fix pci bridge fw path
ACPI DSDT: Make control method `IQCR` serialized
acpi: strip compiler info in built-in DSDT
acpi unit-test: verify signature and checksum
smbios: Set system manufacturer, product & version by default
exec: reduce L2_PAGE_SIZE
exec: make address spaces 64-bit wide
exec: memory radix tree page level compression
exec: pass hw address to phys_page_find
exec: extend skip field to 6 bit, page entry to 32 bit
exec: replace leaf with skip
split definitions for exec.c and translate-all.c radix trees
...
Message-id: cover.1386786228.git.mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
help: add id suboption to -iscsi
scsi-disk: fix WRITE SAME with large non-zero payload
block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
scsi-disk: fix VERIFY emulation
scsi-bus: fix transfer length and direction for VERIFY command
Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Qemu-iotest 030 was broken.
When the coroutine runs and finishes, it will remove itself from the req
list, so let's use safe version of foreach to avoid use after free.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the progress output is very bumpy if the input images contains
a significant portion of unallocated sectors. This patch
checks how much sectors are allocated a priori if progress
output is selected.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
during testing around with 4k LUNs a bad target implementation
triggert an -EIO in iscsi_get_block_status, but it got never caught
resulting in an infinite loop.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The buildbot shows these compiler warnings:
block/vvfat.c: In function 'create_short_and_long_name':
block/vvfat.c:620: warning: array size (8) smaller than bound length (11)
block/vvfat.c:620: warning: array size (8) smaller than bound length (11)
block/vvfat.c:635: warning: array size (8) smaller than bound length (11)
block/vvfat.c:635: warning: array size (8) smaller than bound length (11)
They are caused by tricky code where 8 characters for the name are followed
by 3 characters for the extension, and some operations touch both name and
extension.
Using an 11 character name which includes the extension fixes the compiler
warning, satisfies cppcheck, valgrind and maybe other static and dynamic
code checkers, and even simplifies some parts of the code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
make hpet_find inline so we don't need
to build hpet.c to check if hpet is enabled.
Fixes link error with CONFIG_HPET off.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ensure more then one instance of test_data may exist
at a given time. It will help to compare different
acpi table versions.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
FACS table does not have a checksum, so we can
check at least the signature (existence).
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Every address space has its own nodes and sections, but
it uses the same global arrays of nodes/section.
This limits the number of devices that can be attached
to the guest to 20-30 devices. It happens because:
- The sections array is limited to 2^12 entries.
- The main memory has at least 100 sections.
- Each device address space is actually an alias to
main memory, multiplying its number of nodes/sections.
Remove the limitation by using separate arrays of
nodes and sections for each address space.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'address_space_get_flatview' gets a reference to a FlatView.
If the flatview lookup fails, the code returns without
"unreferencing" the view.
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Owning to some different hardware design, piix and q35 need
different compat. So making them diverge.
On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23
can be assigned to hpet as guest chooses. So we introduce intcap
property to do that.
Consider the compat and piix/q35, we finally have the following
value for intcap: For piix, hpet's intcap is hard coded as IRQ2.
For pc-q35-1.7 and earlier, we use IRQ2 for compat reason. Otherwise
IRQ2, IRQ8, and IRQ16~23 are allowed.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to hpet spec, hpet irq is high active. But according to
ICH spec, there is inversion before the input of ioapic. So the OS
will expect low active on this IRQ line. (On bare metal, if OS driver
claims high active on this line, spurious irq is generated)
We fold the emulation of this inversion inside the hpet logic.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu uses "pci" as name for pci bridges in the firmware device path.
seabios expects "pci-bridge". Result is that bootorder is broken for
devices behind pci bridges.
Some googling suggests that "pci-bridge" is the correct one. At least
PPC-based Apple machines are using this. See question "How do I boot
from a device attached to a PCI card" here:
http://www.netbsd.org/ports/macppc/faq.html
So lets change qemu to use "pci-bridge" too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Vincenzo Maffione (2) and others
# Via Stefan Hajnoczi
* stefanha/net-next:
net: Update netdev peer on link change
virtio-net: don't update mac_table in error state
MAINTAINERS: Add netmap maintainers
net: Adding netmap network backend
Message-id: 1386594692-21278-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
target-arm queue:
* support REFCNT register on integrator/cp board
* implement the A9MP's global timer
* add the 'virt' platform
* support '-cpu host' on KVM/ARM
* Cadence GEM ethernet device bugfixes
* Implement 32-bit ARMv8 VSEL, VMAXNM, VMINNM
* fix TTBCR write masking
* update 32 bit decoder to use new qemu_ld/st TCG opcodes
# gpg: Signature made Tue 10 Dec 2013 06:22:01 AM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Peter Crosthwaite (16) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20131210: (37 commits)
target-arm: fix TTBCR write masking
target-arm: Use new qemu_ld/st opcodes
target-arm: Implement ARMv8 SIMD VMAXNM and VMINNM instructions.
target-arm: Implement ARMv8 FP VMAXNM and VMINNM instructions.
softfloat: Add minNum() and maxNum() functions to softfloat.
softfloat: Remove unused argument from MINMAX macro.
target-arm: Implement ARMv8 VSEL instruction.
target-arm: Move call to disas_vfp_insn out of disas_coproc_insn.
net/cadence_gem: Don't rx packets when no rx buffer available
net/cadence_gem: Improve can_receive debug printfery
net/cadence_gem: Fix register w1c logic
net/cadence_gem: Fix small packet FCS stripping
net/cadence_gem: Fix rx multi-fragment packets
net/cadence_gem: Add missing VMSTATE_END_OF_LIST
net/cadence_gem: Implement SAR (de)activation
net/cadence_gem: Implement SAR match bit in rx desc
net/cadence_gem: Implement RX descriptor match mode flags
net/cadence_gem: Prefetch rx descriptors ASAP
net/cadence_gem: simplify rx buf descriptor walking
net/cadence_gem: Don't assert against 0 buffer address
...
Message-id: 1386686613-2390-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Change audio wakeup rate from 250 Hz to 100 Hz.
Emulation bugfixes for intel-hda and adlib.
# gpg: Signature made Mon 09 Dec 2013 06:04:16 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
# By Gerd Hoffmann (2) and others
# Via Gerd Hoffmann
* kraxel/tags/pull-audio-1:
intel-hda: fix position buffer
adlib: fix patching of port I/O addresses
audio: adjust pulse to 100Hz wakeup rate
audio: Lower default wakeup rate to 100 times / second
Message-id: 1386597974-26506-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We previously allocated 32-bits per temp for the next_free_temp entry.
We now allocate 4 bits per temp across the 4 bitmaps.
Using a linked list meant that if a translator is tweeked, resulting in
temps being freed in a different order, that would have follow-on effects
throughout the TB. Always allocating the lowest free temp means that
follow-on effects are minimized, which can make it easier to diff output
when debugging the translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Current implementation is not accurate according to ARMv7-AR reference
manual. See "B4.1.153 TTBCR, Translation Table Base Control Register,
VMSA | TTBCR format when using the Long-descriptor translation table
format". When LPAE feature is supported, EAE, bit[31] selects
translation descriptor format and, therefore, TTBCR format.
Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386657709-23399-1-git-send-email-s.fedorov@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add 'virt' platform support corresponding to arch/arm/mach-virt
in the Linux kernel tree. This has no platform-specific code but
can use any device whose kernel driver is is able to work purely
from a device tree node. We use this to instantiate a minimal
set of devices: a GIC and some virtio-mmio transports.
Signed-off-by: John Rigby <john.rigby@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-8-git-send-email-peter.maydell@linaro.org
[PMM:
Significantly overhauled:
* renamed user-facing machine to just "virt"
* removed the A9 support (it can't work since the A9 has no
generic timers)
* added virtio-mmio transports instead of random set of 'soc' devices
(though we retain a pl011 UART)
* instead of updating io_base as we step through adding devices,
define a memory map with an array (similar to vexpress)
* similarly, define irqmap with an array
* folded in some minor fixes from John's aarch64-support patch
* rather than explicitly doing endian-swapping on FDT cells,
use fdt APIs that let us just pass in host-endian values
and let the fdt layer take care of the swapping
* miscellaneous minor code cleanups and style fixes
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New ARM boards are generally expected to boot their secondary CPUs
via the PSCI interface, rather than ad-hoc "loop around in holding
pen code" as hw/arm/boot.c implements. In particular this is
necessary for mach-virt kernels. For KVM we achieve this by creating
the VCPUs with a feature flag marking them as starting in PSCI
powered-down state; the guest kernel will then make a PSCI call
(implemented in the host kernel) to start the secondaries at
an address of its choosing once it has got the primary CPU up.
Implement this setting of the feature flag, controlled by a
qdev property for ARMCPU, which board code can set if it is a
PSCI system.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-7-git-send-email-peter.maydell@linaro.org
Linux requires device tree CPU nodes to include a 'compatible'
string describing the CPU. Add a field in the ARMCPU struct for
this so that boards which construct a device tree can insert
the correct CPU nodes.
Note that there is currently no officially specified 'compatible'
string for the TI925T, Cortex-M3 or SA1110 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-6-git-send-email-peter.maydell@linaro.org
Device trees created with create_device_tree() may not have any
entries in their reservemap, because the FDT API requires that the
reservemap is completed before any FDT nodes are added, and
create_device_tree() itself creates a node. However we were not
calling fdt_finish_reservemap(), which meant that there was no
terminator in the reservemap list and whatever happened to be at the
start of the FDT data section would end up being interpreted as
reservemap entries. Avoid this by calling fdt_finish_reservemap()
to add the terminator.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1385140638-10444-3-git-send-email-peter.maydell@linaro.org
There are a number of places where it would be convenient for ARM
code to have working definitions of KVM constants even in code
which is compiled with CONFIG_KVM not set. In this situation we
can't simply include the kernel KVM headers (which might conflict
with host header definitions or not even compile on the compiler
we're using) so we have to redefine equivalent constants.
Provide a mechanism for doing this and checking that the values
match, and use it for the constants we're currently exposing
via an ad-hoc mechanism.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-2-git-send-email-peter.maydell@linaro.org
The ARM A9 MPCore has a timer that is global to all cores in the cluster.
The timer is shared but each core has a private independent comparator
and interrupt.
Based on version contributed by Francois LEGAL.
Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com
[PC changes:
* New commit message
* Re-implemented as single timer model
* Fixed backwards counting issue in polled mode
* completed VMSD fields
* macroified magic numbers (and headerified reg definitions)
* split of as device-model-only patch
* use bitops for 64 bit register access
* Fixed auto increment mode to check condition properly
* general cleanup (names/style etc).
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM:
* minor typo fixes
* added missing return after error_setg()
* dropped setting dc->no_user = 1
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Forward-port the following commit from seabios:
commit 995bbeef78b338370f426bf8d0399038c3fa259c
Author: Paul Menzel <paulepanter@users.sourceforge.net>
Date: Thu Oct 3 11:30:52 2013 +0200
The ASL Optimizing Compiler version 20130823-32 [Sep 11 2013] issues the
following warning.
$ make
[…]
Compiling IASL out/src/fw/acpi-dsdt.hex
out/src/fw/acpi-dsdt.dsl.i 360: Method(IQCR, 1, NotSerialized) {
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)
[…]
ASL Input: out/src/fw/acpi-dsdt.dsl.i - 475 lines, 19181 bytes, 316 keywords
AML Output: out/src/fw/acpi-dsdt.aml - 4407 bytes, 159 named objects, 157 executable opcodes
Listing File: out/src/fw/acpi-dsdt.lst - 143715 bytes
Hex Dump: out/src/fw/acpi-dsdt.hex - 41661 bytes
Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 246 Optimizations
[…]
After changing the parameter from `NotSerialized` to `Serialized`, the
remark is indeed gone and there is no size change.
The remark was added in ACPICA version 20130517 [1] and gives the
following explanation.
If a thread blocks within the method for any reason, and another thread
enters the method, the method will fail because an attempt will be
made to create the same (named) object twice.
In this case, issue a remark that the method should be marked
serialized. ACPICA BZ 909.
[1] ba84d0fc18
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reported-by: Marcel Apfelbaum <marcel.a@redhat.com>
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IASL stores it's revision in each table header it generates.
That's not nice since guests will see a change each time they move
between hypervisors. We generally fill our own info for tables, but we
(and seabios) forgot to do this for the built-in DSDT.
Modifications in DSDT table:
OEM ID: "BXPC" -> "BOCHS "
OEM Table ID: "BXDSDT" -> "BXPCDSDT"
Compiler ID: "INTL" -> "BXPC"
Compiler Version: 0x20130823 -> 0x00000001
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Read all ACPI tables from guest - will be useful for further unit tests.
Follow pointers between ACPI tables checking signature and format for
correctness. Verify checksum for all tables.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, we get SeaBIOS defaults: manufacturer Bochs, product Bochs,
no version. Best SeaBIOS can do, but we can provide better defaults:
manufacturer QEMU, product & version taken from QEMUMachine desc and
name.
Take care to do this only for new machine types, of course.
Note: Michael Tsirkin doesn't trust us to keep values of QEMUMachine member
product stable in the future. Use copies instead, and in a way that
makes it obvious that they're guest ABI.
Note that we can be trusted to keep values of member name, because
that has always been ABI.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With the single exception of ppc with 16M pages,
we get the same number of levels
with L2_PAGE_SIZE = 10 as with L2_PAGE_SIZE = 9.
by doing this we reduce memory footprint of a single level
in the node memory map by 2x without runtime overhead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As an alternative to commit 818f86b (exec: limit system memory
size, 2013-11-04) let's just make all address spaces 64-bit wide.
This eliminates problems with phys_page_find ignoring bits above
TARGET_PHYS_ADDR_SPACE_BITS and address_space_translate_internal
consequently messing up the computations.
In Luiz's reported crash, at startup gdb attempts to read from address
0xffffffffffffffe6 to 0xffffffffffffffff inclusive. The region it gets
is the newly introduced master abort region, which is as big as the PCI
address space (see pci_bus_init). Due to a typo that's only 2^63-1,
not 2^64. But we get it anyway because phys_page_find ignores the upper
bits of the physical address. In address_space_translate_internal then
diff = int128_sub(section->mr->size, int128_make64(addr));
*plen = int128_get64(int128_min(diff, int128_make64(*plen)));
diff becomes negative, and int128_get64 booms.
The size of the PCI address space region should be fixed anyway.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the moment, memory radix tree is already variable width, but it can
only skip the low bits of address.
This is efficient if we have huge memory regions but inefficient if we
are only using a tiny portion of the address space.
After we have built up the map, detect
configurations where a single L2 entry is valid.
We then speed up the lookup by skipping one or more levels.
In case any levels were skipped, we might end up in a valid section
instead of erroring out. We handle this by checking that
the address is in range of the resulting section.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend skip to 6 bit. As page entry doesn't fit in 16 bit
any longer anyway, extend it to 32 bit.
This doubles node map memory requirements, but follow-up
patches will save this memory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In preparation for dynamic radix tree depth support, rename is_leaf
field to skip, telling us how many bits to skip to next level.
Set to 0 for leaf.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The exec.c and translate-all.c radix trees are quite different, and
the exec.c one in particular is not limited to the CPU---it can be
used also by devices that do DMA, and in that case the address space
is not limited to TARGET_PHYS_ADDR_SPACE_BITS bits.
We want to make exec.c's radix trees 64-bit wide. As a first step,
stop sharing the constants between exec.c and translate-all.c.
exec.c gets P_L2_* constants, translate-all.c gets V_L2_*, for
consistency with the existing V_L1_* symbols. Though actually
in the softmmu case translate-all.c is also indexed by physical
addresses...
This patch has no semantic change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It doesn't make sense for a region to be INT64_MAX in size:
memory core uses UINT64_MAX as a special value meaning
"all 64 bit" this is what was meant here.
While this should never affect the spapr system which at the moment always
has < 63 bit size, this makes us hit all kind of corner case bugs with
sub-pages, so users are probably better off if we just use UINT64_MAX
instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
It doesn't make sense for a region to be INT64_MAX in size:
memory core uses UINT64_MAX as a special value meaning
"all 64 bit" this is what was meant here.
While this should never affect the PC system which at the moment always
has < 63 bit size, this makes us hit all kind of corner case bugs with
sub-pages, so users are probably better off if we just use UINT64_MAX
instead.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Address space size for bridge should be full 64 bit,
so we should use UINT64_MAX not INT64_MAX as it's size.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a bunch of files missing, and add self as maintainer. Since I'm
hacking on these anyway, it will be helpful if people Cc me on patches.
Anthony gets to review everything anyway ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We run bios, and boot a minimal boot sector that immediately halts.
Then poke at memory to find ACPI tables.
This only checks that RSDP is there.
More will be added later.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qtest uses the icount infrastructure to implement a test-driven vm_clock. This
however is not necessary when using -qtest as a "probe" together with a normal
TCG-, KVM- or Xen-based virtual machine. Hence, split out the call to
configure_icount into a new function that is called only for "-machine
accel=qtest"; and disable those commands when running with an accelerator
other than qtest.
This also fixes an assertion failure with "qemu-system-x86_64 -machine
accel=qtest" but no -qtest option. This is a valid case, albeit somewhat
weird; nothing will happen in the VM but you'll still be able to
interact with the monitor or the GUI.
Now that qtest_init is not limited to an int(void) function, change
global variables that are not used outside qtest_init to arguments.
And finally, cleanup useless parts of include/sysemu/qtest.h. The file
is not used at all for user-only emulation, and qtest is not available
on Win32 due to its usage of sigwait.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With a help of negative memory region priority PCI address space
is mapped underneath RAM regions effectively catching every access
to addresses not mapped by any other region.
It simplifies PCI address space mapping into system address space.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Temporarily allow either VirtioDeviceClass::init or
VirtioDeviceClass::realize.
Introduce VirtioDeviceClass::unrealize for symmetry.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename qdev -> dev since that's what realize's argument is called by
convention. No need to keep more "qdev" around than necessary.
Avoid duplicate VIRTIO_DEVICE() cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename qdev -> dev because that's what realize's argument is called by
convention. No need to keep more "qdev" around than necessary.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename qdev -> dev since that's what realize's argument is called by
convention. No need to keep more "qdev" around than necessary.
Avoid duplicate VIRTIO_DEVICE() cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename variable qdev -> dev since that's what realize's argument is
called by convention.
Avoid duplicate VIRTIO_DEVICE() cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename variable qdev -> dev since that's what realize's argument is called
by convention.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a crash in hot-unplug of virtio-pci devices behind a PCIe
switch. The crash happens because the ioeventfd is still set whent the
child is destroyed (destruction happens in postorder). Then the proxy
tries to unset to ioeventfd, but the virtqueue structure that holds the
EventNotifier has been trashed in the meanwhile. kvm_set_ioeventfd_pio
does not expect failure and aborts.
The fix is simply to move parts of uninitialization to a new
device_unplugged callback, which is called before the child is destroyed.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now we have these pairs:
- virtio_bus_plug_device/virtio_bus_destroy_device. The first
takes a VirtIODevice, the second takes a VirtioBusState
- device_plugged/device_unplug callbacks in the VirtioBusClass
(here it's just the naming that is inconsistent)
- virtio_bus_destroy_device is not called by anyone (and since
it calls qdev_free, it would be called by the proxies---but
then the callback is useless since the proxies can do whatever
they want before calling virtio_bus_destroy_device)
And there is a k->init but no k->exit, hence virtio_device_exit is
overwritten by subclasses (except virtio-9p). This cleans it up by:
- renaming the device_unplug callback to device_unplugged
- renaming virtio_bus_plug_device to virtio_bus_device_plugged,
matching the callback name
- renaming virtio_bus_destroy_device to virtio_bus_device_unplugged,
removing the qdev_free, making it take a VirtIODevice and calling it
from virtio_device_exit
- adding a k->exit callback
virtio_device_exit is still overwritten, the next patches will fix that.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to the PCI bug that prompted these patches, virtio-ccw will
segfault after the reworking of hotplug/hot-unplug. Prepare for
this by moving virtio_ccw_stop_ioeventfd to before the freeing
of the proxy device.
A better place for this could be the device_unplugged callback
for the virtio-ccw bus. However, we do not yet have a callback
that works: this patch avoids the problem while leaving the tree
bisectable.
Cc: qemu-stable@nongnu.org
Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Suggested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FR bit should be initialized to 1 for MIPS64, under condition that this
bit is writable and that CPU has an FPU unit. It should be initialized to
zero for MIPS32.
This fixes different MIPS32 issues with FPU instructions whose behaviour
defaulted to 64-bit FPU mode.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Everything before CPU_COMMON in the structure is cleared as part of a
CPU reset. This included the features flag, which indicates whether SH4A
instructions are supported or not. As a result, a CPU reset downgraded
the CPU from an SH4A to an SH4.
Signed-off-by: Bobby Bingham <koorogi@koorogi.info>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When a link change occurs on a backend (like tap), we currently do
not propage such change to the nic. As a result, when someone turns
off a link on a tap device, for instance, then a guest doesn't see
that change and continues to try to send traffic or run DHCP even
though the lower-layer is disconnected. This is OK when the network
is set up as a HUB since the the guest may be connected to other HUB
ports too, but when it's set up as a netdev, it makes thinkgs worse.
The patch addresses this by setting the peers link down only when the
peer is not a HUBPORT device. With this patch, in the following config
-netdev tap,id=net0 -device e1000,mac=XXXXX,netdev=net0
when net0 link is turned off, the guest e1000 shows lower-layer link
down. This allows guests to boot much faster in such configurations.
With windows guest, it also allows the network to recover properly
since windows will not configure the link-local IPv4 address, and
when the link is turned on, the proper address address is configured.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
mac_table was always cleaned up first in handling
VIRTIO_NET_CTRL_MAC_TABLE_SET command, and we din't recover
mac_table content in error state, it's not correct.
This patch makes all the changes in temporal variables,
only update the real mac_table if everything is ok.
We won't change mac_table in error state, so rxfilter
notification isn't needed.
This patch also fixed same problame in
http://lists.nongnu.org/archive/html/qemu-devel/2013-11/msg01188.html
(not merge)
I will send patch for virtio spec to clarifying this change.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.
To compile QEMU with netmap support, use the following configure
options:
./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
http://info.iet.unipi.it/~luigi/netmap/
The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this converts read, write and flush functions from aio to coroutines
eliminating almost 200 lines of code.
The requirement for libiscsi is bumped to version 1.4.0 which was
released in may 2012.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VERIFY emulation was completely botched (and remained botched through
all the refactorings). The command must be emulated both in check-medium
mode (BYTCHK=00, which we implement by doing nothing) and in check-bytes
mode (which we do not implement yet). Unlike WRITE AND VERIFY (which we
treat simply as WRITE with FUA bit set), VERIFY cannot be handled like
READ. In fact the device is _receiving_ data for VERIFY, not _sending_
it like READ.
Cc: qemu-stable@nongnu.org
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
See https://bugs.launchpad.net/bugs/1258168
libcacard/vscclient.c: In function 'do_socket_read':
libcacard/vscclient.c:410: warning: implicit declaration of function 'g_warn_if_reached'
libcacard/vscclient.c:410: warning: nested extern declaration of 'g_warn_if_reached'
libcacard/vscclient.c: In function 'main':
libcacard/vscclient.c:763: warning: implicit declaration of function 'g_byte_array_unref'
libcacard/vscclient.c:763: warning: nested extern declaration of 'g_byte_array_unref'
...
libcacard/vscclient.o: In function `do_socket_read':
libcacard/vscclient.c:410: undefined reference to `g_warn_if_reached'
libcacard/vscclient.o: In function `main':
libcacard/vscclient.c:763: undefined reference to `g_byte_array_unref'
g_warn_if_reached was added in glib 2.16, and g_byte_array_unref is
supported since glib 2.22. QEMU requires glib 2.12, so both names must
not be used.
Instead of showing a warning for code which should not be reached,
vscclient better stop running, so g_warn_if_reached is not useful for
vscclient.
In libcacard/vsclient.c, g_byte_array_unref can be replaced by
g_byte_array_free. This is not generally true, so adding a compatibility
layer in include/glib-compat.h is no option here.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reported-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Fix position buffer updates to use the correct stream offset.
Without this patch both IN (record) and OUT (playback) streams
will update the IN buffer positions. The linux kernel notices
and complains:
hda-intel: Invalid position buffer, using LPIB read method instead.
The bug may also lead to glitches when recording and playing
at the same time:
https://bugzilla.redhat.com/show_bug.cgi?id=947785
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is more then plenty to keep audio card fifos filles / emptied.
This drops host cpu-load for audio playback inside a linux vm from
13% to 9%.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit ac86048bcd removed trace.h from
console.h and ignored the fact that qxl-render.c needs this file
(it includes qxl.h which includes console.h which included trace.h).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vfio-pci updates include:
- Update linux-headers to include KVM-VFIO device support
- Enable QEMU support for KVM-VFIO device
- Additional Nvidia x-vga quirk to ACK MSI interrupts
- Debug options to disable MSI/X KVM acceleration
- Fix to cleanup MSI-X vectors on shutdown and avoid IRQ route leaks
The KVM-VFIO device support enables KVM to manage how it handles
coherency instructions in the presence of non-coherent I/O. Dave
Airlie had noted that the Nvidia MSI ACK support here may just be
scratching the surface, but it's better than what we have now and
it's only enabled via the x-vga option, so I'm willing to add since
it does enable some users.
# gpg: Signature made Fri 06 Dec 2013 12:28:19 PM PST using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found
# By Alex Williamson
# Via Alex Williamson
* awilliam/tags/vfio-pci-for-qemu-20131206.0:
vfio-pci: Release all MSI-X vectors when disabled
vfio-pci: Add debug config options to disable MSI/X KVM support
vfio-pci: Fix Nvidia MSI ACK through 0x88000 quirk
vfio-pci: Make use of new KVM-VFIO device
linux-headers: Update from v3.13-rc3
Message-id: 20131206204715.16731.12627.stgit@bling.home
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Paolo Bonzini (17) and others
# Via Stefan Hajnoczi
* stefanha/block: (48 commits)
qemu-iotests: filter QEMU monitor \r\n
aio: make aio_poll(ctx, true) block with no fds
block: clean up bdrv_drain_all() throttling comments
qcow2: use start_of_cluster() and offset_into_cluster() everywhere
qemu-img: decrease progress update interval on convert
qemu-img: round down request length to an aligned sector
qemu-img: dynamically adjust iobuffer size during convert
block/iscsi: set bs->bl.opt_transfer_length
block: add opt_transfer_length to BlockLimits
block/iscsi: set bdi->cluster_size
qemu-img: fix usage instruction for qemu-img convert
qemu-img: add support for skipping zeroes in input during convert
qemu-nbd: add doc for option -f
qemu-iotests: add test for snapshot in qemu-img convert
qemu-img: add -l for snapshot in convert
qemu-iotests: add 058 internal snapshot export with qemu-nbd case
qemu-nbd: support internal snapshot export
snapshot: distinguish id and name in load_tmp
qemu-iotests: Split qcow2 only cases in 048
qemu-iotests: Clean up spaces in usage output
...
Message-id: 1386347807-27359-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Alex Williamson (1) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: fix cpuid leaf 0x0d
qemu: mempath: prefault pages manually (v4)
kvm: Query KVM for available memory slots
Message-id: 1386345276-9803-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Update seabios to master snapshot (pre-1.7.4).
Update vgabios, switch from lgplvgabios to seavgabios.
Update build process to build both 128k and 256k bios versions.
Use 256k bios for pc-*-2.0+ machine types.
# gpg: Signature made Fri 06 Dec 2013 12:01:24 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/tags/pull-seabios-31b8b4e-1:
pc: switch 2.0 machine types to large seabios binary
roms: update vgabios binaries
roms: update seabios binaries
roms: enable seabios cross builds
roms: build two seabios binaries
roms: update seabios submodule to 31b8b4eea9d9ad58a73b22a6060d3ac1c419c26d
add firmware to machine options
add pc-{i440fx,q35}-2.0 machine types
Message-id: 1386322527-23148-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Block patches for 2.0 (flushing block-next)
# gpg: Signature made Fri 29 Nov 2013 08:43:18 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
# By Peter Lieven (17) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony: (41 commits)
qemu-iotests: Add sample image and test for VMDK version 3
vmdk: Allow read only open of VMDK version 3
qemu-iotests: Filter out 'qemu-io> ' prompt
qemu-iotests: Filter qemu-io output in 025
block: Use BDRV_O_NO_BACKING where appropriate
qemu-iotests: Test snapshot mode
block: Enable BDRV_O_SNAPSHOT with driver-specific options
qemu-iotests: Make test case 030, 040 and 055 deterministic
qemu-iotest: Add pause_drive and resume_drive methods
blkdebug: add "remove_break" command
qemu-iotests: Drop local version of cancel_and_wait from 040
sheepdog: support user-defined redundancy option
sheepdog: refactor do_sd_create()
qdict: Optimise qdict_do_flatten()
qdict: Fix memory leak in qdict_do_flatten()
MAINTAINERS: add sheepdog development mailing list
COW: Extend checking allocated bits to beyond one sector
COW: Speed up writes
qapi: Change BlockDirtyInfo to list
block: per caller dirty bitmap
...
Message-id: 1385743555-27888-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Richard Henderson
# Via Richard Henderson
* rth/auxv-2:
linux-user: Use qemu_getauxval for AT_EXECFD
util: Use qemu_getauxval in linux qemu_cache_utils_init
tcg-s390: Use qemu_getauxval in query_facilities
tcg-arm: Use qemu_getauxval
tcg-ppc64: Use qemu_getauxval
osdep: Create qemu_getauxval and qemu_init_auxval
Message-id: 1385757754-10702-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Erik de Castro Lopo (2) and others
# Via Riku Voipio
* riku/linux-user-for-upstream:
linux-user: pass correct parameter to do_shmctl()
linux-user: create target_structs header to place ipc_perm and shmid_ds
flatload: fix non-GOT relocations
linux-user: Implement handling of 5 POSIX timer syscalls.
linux-user: Add target struct defs needed for POSIX timer syscalls.
Message-id: cover.1385732338.git.riku.voipio@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Improvements for usb3 bulk stream (usb core, xhci).
Bugfixes for uas emulation.
Add remote wakeup support for ehci.
Add suspend support for xhci.
Misc minor tweaks and fixes.
# gpg: Signature made Thu 28 Nov 2013 11:44:49 PM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
# By Hans de Goede (11) and others
# Via Gerd Hoffmann
* kraxel/tags/pull-usb-1:
usb: move usb_{hi,lo} helpers to header file.
usb: add vendor request defines
trace-events: Clean up after removal of old usb-host code
Revert "usb-tablet: Don't claim wakeup capability for USB-2 version"
ehci: implement port wakeup
xhci: Call usb_device_alloc/free_streams
usb: Add usb_device_alloc/free_streams
usb: Add max_streams attribute to endpoint info
uas: s/ui/iu/
uas: Fix response iu struct definition
uas: Bounds check tags when using streams
uas: Streams are numbered 1-y, rather then 0-x
uas: Fix / cleanup usb_uas_task error handling
uas: Only use report iu-s for task_mgmt status reporting
scsi: Add 2 new sense codes needed by uas
xhci: add support for suspend/resume
xhci: Add a few missing checks for disconnected devices
Message-id: 1385712381-30918-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
scripts/checkpatch.pl reports about some style problems,
this commit fixes some of them:
ERROR: space prohibited before open square bracket '['
+ .fields = (VMStateField []) {
ERROR: space prohibited after that '!' (ctx:BxW)
+ if (! eeprom->eecs && eecs) {
^
ERROR: space prohibited after that '!' (ctx:WxW)
+ } else if (eeprom->eecs && ! eecs) {
^
ERROR: space prohibited after that '!' (ctx:WxW)
+ } else if (eecs && ! eeprom->eesk && eesk) {
^
ERROR: switch and case should be at the same indent
switch (address >> (eeprom->addrbits - 2)) {
+ case 0:
[...]
+ case 1:
[...]
+ case 2:
[...]
+ case 3:
ERROR: return is not a function, parentheses are not required
+ return (eeprom->eedo);
ERROR: switch and case should be at the same indent
switch (nwords) {
+ case 16:
+ case 64:
[...]
+ case 128:
+ case 256:
[...]
+ default:
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We were relying on msix_unset_vector_notifiers() to release all the
vectors when we disable MSI-X, but this only happens when MSI-X is
still enabled on the device. Perform further cleanup by releasing
any remaining vectors listed as in-use after this call. This caused
a leak of IRQ routes on hotplug depending on how the guest OS prepared
the device for removal.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: qemu-stable@nongnu.org
When MSI is enabled on Nvidia GeForce cards the driver seems to
acknowledge the interrupt by writing a 0xff byte to the MSI capability
ID register using the PCI config space mirror at offset 0x88000 from
BAR0. Without this, the device will only fire a single interrupt.
VFIO handles the PCI capability ID/next registers as virtual w/o write
support, so any write through config space is currently dropped. Add
a check for this and allow the write through the BAR window. The
registers are read-only anyway.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add and remove groups from the KVM virtual VFIO device as we make
use of them. This allows KVM to optimize for performance and
correctness based on properties of the group.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
SMTP does not preserve newlines. This is normally not a problem if the
email body uses DOS or UNIX newlines consistently. In 051.out we mix
UNIX newlines with DOS newlines (since QEMU monitor output uses \r\n).
This patch filters the QEMU monitor output so the golden master file
uses UNIX newlines exclusively.
The result is that patches touching 051.out will apply cleanly without
mangling newlines after this commit.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch drops a special case where aio_poll(ctx, true) returns false
instead of blocking if no file descriptors are waiting on I/O. Now it
is possible to block in aio_poll() to wait for aio_notify().
This change eliminates busy waiting. bdrv_drain_all() used to rely on
busy waiting to completed throttled I/O requests but this is no longer
required so we can simplify aio_poll().
Note that aio_poll() still returns false when aio_notify() was used. In
other words, stopping a blocking aio_poll() wait is not considered
making progress.
Adjust test-aio /aio/bh/callback-delete/one which assumed aio_poll(ctx,
true) would immediately return false instead of blocking.
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since cc0681c454 ("block: Enable the new
throttling code in the block layer.") bdrv_drain_all() no longer spins.
The code used to look as follows:
do {
busy = qemu_aio_wait();
/* FIXME: We do not have timer support here, so this is effectively
* a busy wait.
*/
QTAILQ_FOREACH(bs, &bdrv_states, list) {
while (qemu_co_enter_next(&bs->throttled_reqs)) {
busy = true;
}
}
} while (busy);
Note that throttle requests are kicked but I/O throttling limits are
still in effect. The loop spins until the vm_clock time allows the
request to make progress and complete.
The new throttling code introduced bdrv_start_throttled_reqs(). This
function not only kicks throttled requests but also temporarily disables
throttling so requests can run.
The outdated FIXME comment can be removed. Also drop the busy = true
assignment since we overwrite it immediately afterwards.
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
when doing very large jobs updating the progress only every 2%
is too rare.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch shortens requests to end at an aligned sector so that
the next request starts aligned.
[Squashed Peter's fix for bdrv_get_info() failure discussed on the
mailing list.
--Stefan]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adding xhci support to seabios made it jump over the 128k line.
Changing the bios size breaks migration, so we have to keep a
128k seabios binary for old machine types. New machine types can
use a large 256k bios which should be big enougth for a while.
This patch updates the seabios build process to build seabios twice,
once full featured and once with xen and xhci turned off so the
resulting binary is small enougth to fit into 128k.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Updates seabios to git master snapshot. seabios is in freeze now,
update to final 1.7.4 will follow later this year.
Summary of major changes:
* Support for acpi table loading from qemu.
* Support for the xhci host adapter.
* Support for the pvscsi HBA.
* Various minor bug fixes.
* Lots of cleanups.
Full shortlog since 1.7.3 (note that some of these changes have been
cherry-picked into 1.7.3-stable):
Evgeny Budilovsky (1):
Add pvscsi boot support
Gerd Hoffmann (27):
coreboot: add cbmem console support
Add CONFIG_DEBUG_COREBOOT config option
apm: fix shutdown
ahci: add missing check for allocation failure
bochsvga: fallback to stdvga if dispi interface isn't present
Add generic qemu detection
Drop coreboot qemu detection
Add qemu detection to csm
uas: add (temporary) superspeed stopgap
usb: add usb_update_pipe()
usb: add xhci support
fix buildversion.sh
build: simplify cross builds
build: create output dirs in do-kconfig
build: explicitly set ROM size
Add qemu_cfg_e820 function.
Add support for etc/e820 fw_cfg file
pci: don't reorder entries when moving to 64bit list
pci: don't map usb host adapters above 4G
pci: align 64bit pci regions to 1G
pci: tweak + comment minimum allocations
pci: log pci windows
pci: map 64-bit BARs at location provided by emulator
ahci: zap real mode macros
ahci: remote some parentheses
ahci: alloc structs in high memory
add hw/serialio.c to SRC32SEG
Jonathan A. Kollasch (1):
vgahooks: add SM720 VGA BIOS hooks for WIN Enterprises MB-60470
Kevin O'Connor (80):
Fix USB EHCI detection that was broken in hlist conversion of PCIDevices.
Update README to include info on VARLOW variables.
PIC code cleanups.
Move internal timer code from clock.c to a new file timer.c.
Don't pass khz to pmtimer_setup - it's always PM_TIMER_FREQUENCY.
Add helper functions to convert timer irqs to milliseconds.
Improve accuracy of internal timers.
Rename cpu_khz to TimerKHz.
Shift CPU TSC down to reduce need for 64bit variables.
Rename check_timer() function (and similar) to irqtimer_check().
Rename check_tsc() (and similar) to timer_check() and use u32.
Separate out timer setup code.
Unify pmtimer_read() and pittimer_read() code.
Default unused UMB areas to be read-only.
Add missing mathcp_setup() call to CSM code.
Fix bug in CBFS file walking with compressed files.
Support custom boot menu prompt and custom boot menu key.
Minor cleanups to smm assembler.
Add config option to support memory allocations in 9-segment.
Minor - no need to declare MaxCountCPUs as VARFSEG.
Minor - simplify rom_reserve().
Rename tools/ directory to scripts/ directory.
Update kconfig to latest version.
build: Don't use vpath makefile directive.
Move code centered around specific hardware devices to src/hw/
Move code cenetered around firmware initialization to src/fw/
build: Reorder makefile source list to group like files together.
README: Update readme to note scripts/ directory rename and vgasrc/ directory.
vgabios: Rename stdvga_bpp_factor to stdvga_vram_ratio.
vgabios: Limit the range of the VBE number of "pages" parameter.
readme: Minor - fix typo in readme.
Split x86 specific functions out of util.c/h to new files x86.c/h.
Move keyboard calling code from util.c to boot.c.
Rename util.c to string.c and introduce string.h.
build: Perform compile checking on vgasrc code.
Move stacks.c definitions from util.h to new file stacks.h.
Move romfile definitions from util.h to new file romfile.h.
Move malloc code from pmm.c to new files malloc.c and malloc.h.
Move function definitions for output.c from util.h to new file output.h.
Move definition of struct segoff_s from farptr.h to types.h.
build: Fix import of gcc dependency files.
Move pirtable definitions from hw/pci.h to std/pirtable.h and util.h.
Move optionroms.h to std/optionrom.h and util.h.
Move vbe.h to std/vbe.h.
Move fw/LegacyBios.h to std/LegacyBios.h and remove csm.h.
Move fw/smbios.h to std/smbios.h.
Move fw/mptable.h to std/mptable.h.
Move fw/acpi.h to std/acpi.h.
Move pnpbios definition to new file std/pnpbios.h.
Move pmm definitions to new file std/pmm.h.
Split disk.h into block.h and std/disk.h.
Move standard bda type info from biosvar.h to std/bda.h.
Merge bmp.h, boot.h, jpeg.h, and post.h into util.h.
Sort the sections of util.h.
Move PIT setup from clock.c to hw/timer.c.
Rename hw/cmos.h to hw/rtc.h and copy RTC code from clock.c to hw/rtc.c.
Move dma code to new file hw/dma.c.
Remove ioport.h; disperse its contents to other header files.
Minor - update file comments in src/malloc.c.
Rename fields of 'struct chs_s' and use in floppy lba2chs().
Rearrange stack_hop_back() call in wait_irq, check_irqs, and _farcall16.
Minor - move call16 assembler in romlayout.S.
Make __call16 use C calling convention and support two passed parameters.
Update _farcall16() to pass segment of callregs explicitly.
Support call16() calls after entering 32bit mode from call32().
Run ahci code entirely in 32bit mode.
Build different final files for QEMU, coreboot, and CSM.
Convert op->drive_g from a 16bit pointer to a 32 bit "GLOBALFLAT" pointer.
megasas: Don't attempt to access 'struct pci_device' at runtime.
Minor - eliminate the SET_GLOBAL macro.
Move low-level hardware writing from output.c to new file hw/serialio.c.
vgabios: Load the DAC palette in "packed" modes on Cirrus and BochsVGA.
vgabios: Support custom fonts in vga framebuffer text writing.
vgabios: Add bochsvga "HDTV" resolutions.
vgabios: Avoid possible divide by zero in bochsvga_set_displaystart.
vgabios: Work around lack of support for "calll" in x86emu emulation.
Minor - update file comment on bootsplash.c.
vgabios: Support allocating an extra stack for vgabios calls and default on.
vgabios: Move initialization code to new file vgainit.c.
floppy: Minor - add warnings if timeouts occur.
Michael S. Tsirkin (6):
acpi: sync FADT flags from PIIX4 to Q35
acpi_extract.py: document DEVICE directives
biostables: support looking up RSDP
romfile_loader: utility to patch in-memory ROM files
acpi: load and link tables through romfile loader
acpi: strip compiler info in built-in DSDT if any
Paul Menzel (2):
ACPI DSDT: Make control method `IQCR` serialized
hw/usb-xhci.c: Code refactoring to not override initializers in `speed_from_xhci[16]`
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix cpuid leaf 0x0d which incorrectly parsed eax and ebx.
However, before this patch the CPUID worked fine -- the .offset
field contained the size _and_ was stored in the register that
is supposed to hold the size (eax), and likewise the .size field
contained the offset _and_ was stored in the register trhat is
supposed to hold the offset (ebx).
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
since the convert process is basically a sync operation it might
be benificial in some case to change the hardcoded I/O buffer
size to a greater value.
This patch increases the I/O buffer size if the output
driver advertises an optimal transfer length or discard alignment
that is greater than the default buffer size of 2M.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch aims to set bdi->cluster_size to the internal page size
of the iscsi target so that enabled callers can align requests
properly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
we currently do not check if a sector is allocated during convert.
This means if a sector is unallocated that we allocate a bounce
buffer of zeroes, find out its zero later and do not write it
in the best case. In the worst case this can lead to reading
blocks from a raw device (like iSCSI) altough we could easily
know via get_block_status that they are zero and simply skip them.
This patch also fixes the progress output not being at 100% after
a successful conversion.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now qemu-img convert have similar options as qemu-nbd for internal
snapshot.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This case can't run when IMGPROTO=nbd, since it needs to create some
internal snapshot which would fail for EOF write request, even when
TEST_IMG is exported with "-f raw" in common.rc, so set _supported_proto
to file.
_require_command() is changed to tip what util is missing, instead
of printing a blank.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now it is possible to directly export an internal snapshot, which
can be used to probe the snapshot's contents without qemu-img
convert.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since later this function will be used so improve it. The only caller of it
now is qemu-img, and it is not impacted by introduce function
bdrv_snapshot_load_tmp_by_id_or_name() that call bdrv_snapshot_load_tmp()
twice to keep old search logic. bdrv_snapshot_load_tmp_by_id_or_name() return
int to let caller know the errno, and errno will be used later.
Also fix a typo in comments of bdrv_snapshot_delete().
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Format "raw" doesn't always work on certain file systems (e.g. tmpfs).
Use qcow2 to make the allocation status explicit and split into a new
case.
[Resolved merge conflict due to "qemu-io> " prompt filter, added 074 to
group file, and fixed up s/048/074/ copy-paste mistake.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This replaces _unsupported_qemu_io_options and check for support of
current cache mode, and allow to provide a default if user didn't
specify.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The option sets cache mode used in the tests. "-nocache" is changed to
an alias to "-c none", and internally passes "-t none" to qemu-io.
Python scripts will make use of option this in the next commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Strictly speaking, this is only required for has_zero_init() == false,
but it's easy enough to just do a cluster-aligned write that is padded
with zeros after the header.
This fixes that after 'qemu-img create' header extensions are attempted
to be parsed that are really just random leftover data.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Leaving the backing file open although it is not needed anymore can
cause problems if it is opened through a block driver which allows
exclusive access only and if the create function of the block driver
used for the top image (the one being created) tries to close and reopen
the image file (which will include opening the backing file a second
time).
In particular, this will happen with a backing file opened through
qemu-nbd and using qcow2 as the top image file format (which reopens the
image to flush it to disk).
In addition, the BlockDriverState in bdrv_img_create() is used for the
backing file only; it should therefore be made local to the respective
block.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fetch the data to be written from the input buffer. If it is all zeroes,
we can use the write_zeroes call (possibly with the new MAY_UNMAP flag).
Otherwise, do as many write cycles as needed, writing 512k at a time.
Strictly speaking, this is still incorrect because a zero cluster should
only be written if the MAY_UNMAP flag is set. But this is a bug in qcow2
and the other formats, not in the SCSI code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since we report ANC_SUP==0 in VPD page B2h, we need to return
an error (ILLEGAL REQUEST/INVALID FIELD IN CDB) for all WRITE SAME
requests with ANCHOR==1.
Inspired by a similar patch to the LIO in-kernel target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the same that is already done for WRITE SAME.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The code is similar to the implementation of discard and write_zeroes
with UNMAP. However, failure must be propagated up to block.c.
The stale page cache problem can be reproduced as follows:
# modprobe scsi-debug lbpws=1 lbprz=1
# ./qemu-io /dev/sdXX
qemu-io> write -P 0xcc 0 2M
qemu-io> write -z 0 1M
qemu-io> read -P 0x00 0 512
Pattern verification failed at offset 0, 512 bytes
qemu-io> read -v 0 512
00000000: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
...
# ./qemu-io --cache=none /dev/sdXX
qemu-io> write -P 0xcc 0 2M
qemu-io> write -z 0 1M
qemu-io> read -P 0x00 0 512
qemu-io> read -v 0 512
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
...
And similarly with discard instead of "write -z".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
See the next commit for the description of the Linux kernel problem
that is worked around in raw_open_common.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Writing zeroes to a file can be done by punching a hole if
MAY_UNMAP is set.
Note that in this case ENOTSUP is not ignored, but makes
the block layer fall back to the generic implementation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The current check is right for MAY_UNMAP=1. For MAY_UNMAP=0, just
try and fall back to regular writes as soon as a WRITE SAME command
fails.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
added myself to reflect recent work on the iscsi block driver.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will let misaligned but large requests use zero clusters. This
is important because the cluster size is not guest visible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Right now, bdrv_co_do_write_zeroes will only try to align the
beginning of the request. However, it is simpler for many
formats to expect the block layer to separate both the head *and*
the tail. This makes sure that the format's bdrv_co_write_zeroes
function will be called with aligned sector_num and nb_sectors for
the bulk of the request.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Similar to write_zeroes, let the generic code receive a ENOTSUP for
discard operations. Since bdrv_discard has advisory semantics,
we can just swallow the error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This lets bdrv_co_do_rw receive flags, so that it can be used for
zero writes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_co_discard is only covering drivers which have a .bdrv_co_discard()
implementation, but not those with .bdrv_aio_discard(). Not very nice,
and easy to avoid.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The buffer for description file was 4096 which only covers a few
hundred of extents. This changes the buffer to dynamic allocated with
g_strdup_printf in order to support bigger cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prevent a call to put_kbd if null.
On shutdown of some OSes, the keyboard handler goes away before the
system is down. If a key is typed during this window, qemu crashes.
Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warning from ccc-analyzer:
libcacard/vcard_emul_nss.c:937:9: warning:
Value stored to 'cert_count' is never read
cert_count = options->vreader[i].cert_count;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warning from ccc-analyzer:
libcacard/cac.c:192:13: warning: Value stored to 'ret' is never read
ret = VCARD_DONE;
^ ~~~~~~~~~~
Here 'ret' is assigned a value inside of a switch statement and also after
that switch statement.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most code already used QEMUTimer without the redundant 'struct' keyword.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra):
CC qobject/qerror.o
qobject/qerror.c: In function ‘qerror_from_info’:
qobject/qerror.c:53:5: error:
function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
qerr->err_msg = g_strdup_vprintf(fmt, *va);
^
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra):
CC m68k-softmmu/hw/m68k/mcf5206.o
hw/i386/acpi-build.c: In function ‘build_append_nameseg’:
hw/i386/acpi-build.c:294:5: error:
function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
g_string_vprintf(s, format, args);
^
When this warning is fixed, there is a new compiler warning:
CC i386-softmmu/hw/i386/acpi-build.o
hw/i386/acpi-build.c: In function ‘build_append_notify’:
hw/i386/acpi-build.c:632:5: error:
format not a string literal and no format arguments [-Werror=format-security]
build_append_nameseg(method, name);
^
This is fixed here, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reduces the dependencies on trace.h.
Only one source file which needs hcd-ehci.h also needs trace.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reduces the dependencies on trace.h.
Only two source files which need console.h also need trace.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_co_queue_wait_insert_head() is unused in qemu code base now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds firmware to the machine options. -bios <file> becomes a
shortcut for -machine firmware=<file>. Advantage is that the firmware
can be specified via config file as -machine is parsed using QemuOpts
and it is also possible to use different defaults for different
machine types (via QEMUMachine->default_machine_opts).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The intention of the Xen PV device is that it is used as a parent
device for PV drivers in Xen HVM guests and the set of PV drivers that
bind to the device is determined by its device ID (and possibly
vendor ID and revision). As such, the device should not have a default
device ID, it should always be supplied by the Xen toolstack.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch fixes:
1. build error in xen_pt.c when XEN_PT_LOGGING_ENABLED is defined
2. debug output format string error when DEBUG_XEN is defined
In the second case I also have the output info in consistent with the
output in mapping function - that is, print start_addr instead of
phys_offset.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
With this we no longer pass down envp, and thus all systems can have
the same void prototype. So also eliminate a useless thunk.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
No need to set up a SIGILL signal handler for detection anymore.
Remove a ton of sanity checks that must be true, given that we're
requiring a 64-bit build (the note about 31-bit KVM is satisfied
by configuring with TCI).
Signed-off-by: Richard Henderson <rth@twiddle.net>
Allow host detection on linux systems without glibc 2.16 or later.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Allow host detection on linux systems without glibc 2.16 or later.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This removes "qemu-io> " prompt from qemu-io output in _filter_qemu_io,
and updates all the output files with the following command:
cd tests/qemu-iotests && sed -i "s/qemu-io> //g" *.out
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If you open an image temporarily just because you want to check its size
or get it flushed, there's no real reason to open the whole backing file
chain.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
In the case of snapshot=on, don't rely on the backing file path in the
temporary image any more, but override the backing file with the given
set of options. This way, block drivers that don't use a file name can
be accessed with snapshot=on, for example:
-drive file.driver=nbd,file.host=localhost,snapshot=on
Which becomes internally something like:
file.filename=/tmp/vl.AWQZCu,backing.file.driver=nbd,backing.file.host=localhost
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pause the drive and start the block job, so we won't miss the block job.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
They wrap blkdebug "break" and "remove_break".
Add optional argument "resume" to cancel_and_wait().
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds "remove_break" command which is the reverse of blkdebug
command "break": it removes all breakpoints with given tag and resumes
all the requests.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sheepdog support two kinds of redundancy, full replication and erasure coding.
# create a fully replicated vdi with x copies
-o redundancy=x (1 <= x <= SD_MAX_COPIES)
# create a erasure coded vdi with x data strips and y parity strips
-o redundancy=x:y (x must be one of {2,4,8,16} and 1 <= y < SD_EC_MAX_STRIP)
E.g, to convert a vdi into sheepdog vdi 'test' with 8:3 erasure coding scheme
$ qemu-img convert -o redundancy=8:3 linux-0.2.img sheepdog:test
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Nested QDicts used to be both entered recursively in order to move their
entries to the target QDict and also be moved themselves to the target
QDict like all other objects. This is harmless because for the top
level, qdict_do_flatten() will encounter the (now empty) QDict for a
second time and then delete it, but at the same time it's obviously
unnecessary overhead. Just delete nested QDicts directly after moving
all of their entries.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
cow_co_is_allocated() only checks one sector's worth of allocated bits
before returning. This is allowed but (slightly) inefficient, so extend
it to check all of the file's metadata sectors.
Signed-off-by: Charlie Shepherd <charlie@ctshepherd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[kwolf: silenced compiler warning (-Wmaybe-uninitialized for changed)]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Process a whole sector's worth of COW bits by reading a sector, setting
the bits after skipping any already set bits, then writing it out again.
Make sure we only flush once before writing metadata, and only if we
need to write metadata.
Signed-off-by: Charlie Shepherd <charlie@ctshepherd.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have multiple dirty bitmaps in BDS now, switch QAPI to allow query
it (BlockInfo.dirty_bitmaps), and also drop old BlockInfo.dirty.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously a BlockDriverState has only one dirty bitmap, so only one
caller (e.g. a block job) can keep track of writing. This changes the
dirty bitmap to a list and creates a BdrvDirtyBitmap for each caller, the
lifecycle is managed with these new functions:
bdrv_create_dirty_bitmap
bdrv_release_dirty_bitmap
Where BdrvDirtyBitmap is a linked list wrapper structure of HBitmap.
In place of bdrv_set_dirty_tracking, a BdrvDirtyBitmap pointer argument
is added to these functions, since each caller has its own dirty bitmap:
bdrv_get_dirty
bdrv_dirty_iter_init
bdrv_get_dirty_count
bdrv_set_dirty and bdrv_reset_dirty prototypes are unchanged but will
internally walk the list of all dirty bitmaps and set them one by one.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Creating target_structs header in linux-user/$arch/ and making
target_ipc_perm and target_shmid_ds its first inhabitants.
The struct defintions may/should be further fine-tuned by arch maintainers.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use target address rather than host address when performing
non-GOT relocations
Signed-off-by: Corey J. Boyle <corey@kansanian.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add defines for vendor specific usb control requests.
Group defines by Device / Interface / Endpoint while
being at it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit b5613fd neglected to drop the trace events along with the code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Update portsc register and raise irq in case a suspended
port is woken up, so remote wakeup works on our ehci ports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a block device is unbacked, a streaming blockjob should immediately
finish instead of beginning to try to stream, then noticing the backing
file does not contain even the first sector (since it does not exist)
and then finishing normally.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a test for coroutine execution order in test-coroutine -
this catches a bug in the CPC coroutine implementation.
Signed-off-by: Charlie Shepherd <charlie@ctshepherd.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There may be calls to error_setg() and especially error_setg_errno()
which blindly (and until now wrongly) assume these functions not to
clobber errno (e.g., they pass errno to error_setg_errno() and return
-errno afterwards). Instead of trying to find and fix all of these
constructs, just make sure error_setg() and error_setg_errno() indeed do
not clobber errno.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the target has_zero_init = 0, but supports efficiently
writing zeroes by unmapping we call bdrv_make_zero to
avoid fully allocating the target. This currently works
only for iscsi. It can be extended to raw with
BLKDISCARDZEROES for example.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch does 2 things:
a) only do additional call outs if BDRV_BLOCK_ZERO is not already set.
b) use the newly introduced bdrv_unallocated_blocks_are_zero()
to return the zero state of an unallocated block. the used callout
to bdrv_has_zero_init() is only valid right after bdrv_create.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch adds a call to completely zero out a block device.
the operation is sped up by checking the block status and
only writing zeroes to the device if they currently do not
return zeroes. optionally the zero writing can be sped up
by setting the flag BDRV_REQ_MAY_UNMAP to emulate the zero
write by unmapping if the driver supports it.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
now that bdrv_co_discard can handle limits we do not need
the request split logic here anymore.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch adds BlockLimits which introduces discard and write_zeroes
limits and alignment information to the BlockDriverState.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds 2 wrappers to read the unallocated_blocks_are_zero and
can_write_zeroes_with_unmap info from the BDI. The wrappers are
required to check for the existence of a backing_hd and
if the devices are opened with the correct flags.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For "none" sync mode in "absolute-paths" mode, the current image should
be used as the backing file for the newly created image.
The current behavior is:
a) If the image to be mirrored has a backing file, use that (which is
wrong, since the operations recorded by "none" are applied to the
image itself, not to its backing file).
b) If the image to be mirrored lacks a backing file, the target doesn't
have one either (which is not really wrong, but not really right,
either; "none" records a set of operations executed on the image
file, therefore having no backing file to apply these operations on
seems rather pointless).
For a, this is clearly a bugfix. For b, it is still a bugfix, although
it might break existing API - but since that case crashed qemu just
three weeks ago (before 1452686495), we
can safely assume there is no such API relying on that case yet.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1385407736-13941-2-git-send-email-mreitz@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Note this code is not as KISS as I would like, the reason for this is that
the Linux kernel interface wants streams on eps belonging to one interface
to be allocated in one call. Things will also work if we do this one ep at a
time (as long as all eps support the same amount of streams), but lets stick
to the kernel API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The various uas data structures are called IU-s, which is short for
Information Unit, rather then UI-s.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch mirrors a patch to the Linux uas kernel driver which I've just
submitted. It looks like the qemu uas struct definitions were taken from
the Linux kernel driver, and have inherited the same mistake.
Besides fixing the response iu struct, the patch also drops the add_info
parameter from the usb_uas_queue_response() function, it is always 0 anyways,
and expressing 3 zero-bytes as a function argument is a bit hard.
Below is the long explanation for this change taken from the kernel commit:
The response iu struct before this patch has a size of 7 bytes, which is weird
since all other iu-s are explictly padded to a multiple of 4 bytes.
Submitting a 7 byte bulk transfer to the status endpoint of a real uasp device
when expecting a response iu results in an USB babble error, as the device
actually sends 8 bytes.
Up on closer reading of the UAS spec:
http://www.t10.org/cgi-bin/ac.pl?t=f&f=uas2r00.pdf
The reason for this becomes clear, the 2 entries in "Table 17 — RESPONSE IU"
are numbered 4 and 6, looking at other iu definitions in the spec, esp.
multi-byte fields, this indicates that the ADDITIONAL RESPONSE INFORMATION
field is not a 2 byte field as one might assume at a first look, but is
a multi-byte field containing 3 bytes.
This also aligns with the SCSI Architecture Model 4 spec, which UAS is based
on which states in paragraph "7.1 Task management function procedure calls"
that the "Additional Response Information" output argument for a Task
management function procedure call is 3 bytes.
Last but not least I've verified this by sending a logical unit reset task
management call with an invalid lun to an actual uasp device, and received
back a response-iu with byte 6 being 0, and byte 7 being 9, which is the
responce code for an invalid iu, which confirms that the response code is
being reported in byte 7 of the response iu rather then in byte 6.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Disallow the guest to cause us to address the data3 and status3 arrays
out of bounds.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is easier to simply make the arrays one larger, rather then
substracting one everywhere.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-The correct error if we cannot find the dev is INCORRECT_LUN rather then
INVALID_INFO_UNIT
-Move the device not found check to the top so we only need to do it once
-Remove the dev->lun != lun checks, dev is returned by scsi_device_find
which searches by lun, so this will never trigger
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Regular scsi cmds should always report their status using a sense-iu, using
the sense code to report any errors.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The OS can ask the xhci controller to save and restore its
internal state, which is used by the OS when the system is
suspended and resumed.
This patch handles writes to the save + restore bits in the
command register. Only thing it does is updating the
restore error bit in the status register to signal an error
on restore. The guest OS should do a full reinitialization
after resume then.
This is the minimal patch which gets S3 going with xhci.
Implementing full save/restore support is TBD.
https://bugzilla.redhat.com/show_bug.cgi?id=1012365
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
One of the reworks of qemu's usb core made changes to usb-port's disconnect
handling. Now ports with a device will always have a non 0 dev member, but
if the device is not attached (which is possible with usb redirection),
dev->attached will be 0.
So supplement all checks for dev to also check dev->attached, and add an
extra check in a path where a device check was completely missing.
This fixes various crashes (asserts triggering) I've been seeing when xhci
attached usb devices get disconnected at the wrong time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The default granularity for the FIT timer on 440 is on every 0x1000th
transition of TB from 0 to 1. Translated that means 48828 times a second.
Since interrupts are quite expensive for 440 and we don't really care
about the accuracy of the FIT to that significance, let's force FIT and
WDT to at best millisecond granularity.
This basically restores behavior as it was in QEMU 1.6, where timers
could only deal with millisecond granularities at all.
This patch greatly improves performance with the 440 target and restores
roughly the same performance level that QEMU 1.6 had for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1385416015-22775-3-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Today we fire FIT and WDT timer events every time the respective bit
position in TB flips from 0 -> 1.
However, there is no need to do this if the end result would be that
we're changing a TSR bit that is set to 1 to 1 again. No guest visible
change would have occured.
So whenever we see that the TSR bit to our timer is already set, don't
even bother to update the timer that would potentially fire it off.
However, we do need to make sure that we update our timer that notifies
us of the TB flip when the respective TSR bit gets unset. In that case
we do care about the flip and need to notify the guest again. So add
a callback into our timer handlers when TSR bits get unset.
This improves performance for me when the guest is busy processing things.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1385416015-22775-2-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
pc very last minute fixes for 1.7
This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.
There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.
I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 25 Nov 2013 03:40:07 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (5) and Bandan Das (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
configure: make --iasl option actually work
Revert "e1000/rtl8139: update HMP NIC when every bit is written"
acpi-build: fix build on glib < 2.14
acpi-build: fix build on glib < 2.22
pci: unregister vmstate_pcibus on unplug
s390x: fix flat file load on 32 bit systems
Message-id: 1385379990-32093-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Here are a bunch of 1.7-tagged patches that I was afraid
were getting forgotten or that did not have a clear maintainer responsible
for making a pull request.
# gpg: Signature made Thu 21 Nov 2013 08:40:59 AM PST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found
# By Peter Maydell (3) and others
# Via Paolo Bonzini
* bonzini/tags/for-anthony:
qga: Fix compiler warnings (missing format attribute, wrong format strings)
mips jazz: do not raise data bus exception when accessing invalid addresses
target-i386: yield to another VCPU on PAUSE
rng-egd: offset the point when repeatedly read from the buffer
rng-egd: remove redundant free
target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()
vfio-pci: Fix multifunction=on
atomic.h: Fix build with clang
pc: get rid of builtin pvpanic for "-M pc-1.5"
configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0
sun4m: Add FCode ROM for TCX framebuffer
Message-id: 1385052578-32352-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
KVM reports the number of available memory slots (KVM_CAP_NR_MEMSLOTS)
using the extension interface. Both x86 and s390 implement this, ARM
and powerpc do not yet enable it. Convert the static slots array to
be dynamically allocated, supporting more slots when available.
Default to 32 when KVM_CAP_NR_MEMSLOTS is not implemented. The
motivation for this change is to support more assigned devices, where
memory mapped PCI MMIO BARs typically take one slot each.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
--iasl option was added to CC option parsing section by mistake,
it's not effective there and attempts to use cause
an 'unknown option' error.
Fix this up.
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, qemu-ga for Windows fails to execute guset-fsfreeze-freeze when
no user is logging in to Windows, with an error message:
{"error":{"class":"GenericError",
"desc":"failed to add C:\\ to snapshotset: (error: 8004230f)"}}
To enable guest-fsfreeze-freeze/thaw without logging in users, this installs
a service to execute qemu-ga VSS provider COM+ application that has full
access privileges to the local system. The service will automatically be
removed when the COM+ application is deregistered.
This patch replaces ICOMAdminCatalog interface with ICOMAdminCatalog2
interface that contains CreateServiceForApplication() method in addition.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Tested-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It is currently possible to specify things like:
-device e1000,netdev=foo,vlan=1
With this usage, whichever argument was specified last (vlan or netdev)
overwrites what was previousely set and results in a non-working
configuration. Even worse, when used with multiqueue devices,
it causes a segmentation fault on exit in qemu_free_net_client.
That patch treates the above command line options as invalid and
generates an error at start-up.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra):
CC qga/commands.o
qga/commands.c: In function ‘slog’:
qga/commands.c:28:5: error:
function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
g_logv("syslog", G_LOG_LEVEL_INFO, fmt, ap);
^
gcc 4.8.2 reports this warning when slog is declared with the
gnu_printf format attribute:
qga/commands-posix.c: In function ‘qmp_guest_file_open’:
qga/commands-posix.c:404:5: warning:
format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘int64_t’ [-Wformat=]
slog("guest-file-open, handle: %d", handle);
^
On 32 bit hosts there are three more warnings which are also fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses.
However, there is no easy way to prevent them. Creating a big memory region
for the whole address space doesn't prevent memory core to directly call
unassigned_mem_read/write which in turn call cpu->do_unassigned_access,
which (for MIPS CPU) raise an data bus exception.
This fixes a MIPS Jazz regression introduced in c658b94f6e.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify
or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown.
The problem shows up as soon as FreeBSD turns out its periodic (~1 ms)
tick, but the timers are only the trigger for a pre-existing problem.
Before the offending patch, setting a timer did a timer_settime system call.
After, setting the timer exits the event loop (which uses poll) and
reenters it with a new deadline. This does not cause any slowdown; the
difference is between one system call (timer_settime and a signal
delivery (SIGALRM) before the patch, and two system calls afterwards
(write to a pipe or eventfd + calling poll again when re-entering the
event loop).
Unfortunately, the exit/enter causes the main loop to grab the iothread
lock, which in turns kicks the VCPU thread out of execution. This
causes TCG to execute the next VCPU in its round-robin scheduling of
VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause"
instruction in its idle loop which only burns cycles without any
progress. As soon as the timer tick expires, the first VCPU runs
the interrupt handler but very soon it sets it again---and QEMU
then goes back doing nothing in the second VCPU.
The fix is to make the pause instruction do "cpu_loop_exit".
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The buffer content might be read out more than once, currently
we just repeatedly read the first data block, buffer offset is
missing.
Cc: qemu-stable@nongnu.org
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix build failures with clang when KVM is not enabled by
providing a stub version of kvm_arch_get_supported_cpuid().
We retain the compile time check that this function isn't
called when CONFIG_KVM is not set by guarding the stub with
ifndef __OPTIMIZE__ (we assume that an optimizing build will
do sufficient constant folding and dead code elimination to
remove the calls before linking).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an assigned device is initialized it copies the device config
space into the emulated config space. Unfortunately multifunction is
setup prior to the device initfn and gets clobbered. We need to
restore it just like pci-assign does.
Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
clang defines __ATOMIC_SEQ_CST but its implementation of the
__atomic_exchange() builtin differs from that of gcc. Move the
__clang__ branch of the ifdef ladder to the top and fix its
implementation (there is no such builtin as __sync_exchange),
so we can compile with clang again.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This causes two slight backwards-incompatibilities between "-M pc-1.5"
and 1.5's "-M pc":
(1) a fw_cfg file is removed with this patch. This is only a problem
if migration stops the virtual machine exactly during fw_cfg enumeration.
(2) after migration, a VM created without an explicit "-device pvpanic"
will stop reporting panics to management.
The first problem only occurs if migration is done at a very, very
early point (and I'm not sure it can happen in practice for reasonable-size
VMs, since it will likely take more time to send the RAM to destination,
than it will take for BIOS to scan fw_cfg).
The second problem only occurs if the guest panics _and_ has a guest
driver _and_ management knows to look at the crash event, so it is
mostly theoretical at this point in time.
Thus keep the code simple, and pretend it was never broken.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.
Thanks to Paul Smith for analyzing this bug for us.
Cc: qemu-stable@nongnu.org
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Upstream OpenBIOS now implements SBus probing in order to determine the
contents of a physical bus slot, which is required to allow OpenBIOS to
identify the framebuffer without help from the fw_cfg interface.
SBus probing works by detecting the presence of an FCode program
(effectively tokenised Forth) at the base address of each slot, and if
present executes it so that it creates its own device node in the
OpenBIOS device tree.
The FCode ROM is generated as part of the OpenBIOS build and should
generally be updated at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
clang defines __ATOMIC_SEQ_CST but its implementation of the
__atomic_exchange() builtin differs from that of gcc. Move the
__clang__ branch of the ifdef ladder to the top and fix its
implementation (there is no such builtin as __sync_exchange),
so we can compile with clang again.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1382435921-18438-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Commit 787aaf5 (target-i386: forward CPUID cache leaves when -cpu host is
used, 2013-09-02) brings bits 31..26 of CPUID leaf 04h out of sync with
the APIC IDs that QEMU reserves for each package. This number must come
from "-smp" options rather than from the host CPUID.
It also turns out that this unsyncing makes Windows Server 2012R2 fail
to boot.
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1384879786-6721-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses.
However, there is no easy way to prevent them. Creating a big memory region
for the whole address space doesn't prevent memory core to directly call
unassigned_mem_read/write which in turn call cpu->do_unassigned_access,
which (for MIPS CPU) raise an data bus exception.
This fixes a MIPS Jazz regression introduced in c658b94f6e.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1383603977-7003-1-git-send-email-hpoussin@reactos.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify
or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown.
The problem shows up as soon as FreeBSD turns out its periodic (~1 ms)
tick, but the timers are only the trigger for a pre-existing problem.
Before the offending patch, setting a timer did a timer_settime system call.
After, setting the timer exits the event loop (which uses poll) and
reenters it with a new deadline. This does not cause any slowdown; the
difference is between one system call (timer_settime and a signal
delivery (SIGALRM) before the patch, and two system calls afterwards
(write to a pipe or eventfd + calling poll again when re-entering the
event loop).
Unfortunately, the exit/enter causes the main loop to grab the iothread
lock, which in turns kicks the VCPU thread out of execution. This
causes TCG to execute the next VCPU in its round-robin scheduling of
VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause"
instruction in its idle loop which only burns cycles without any
progress. As soon as the timer tick expires, the first VCPU runs
the interrupt handler but very soon it sets it again---and QEMU
then goes back doing nothing in the second VCPU.
The fix is to make the pause instruction do "cpu_loop_exit".
Cc: Richard Henderson <rth@twiddle.net>
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1384948442-24217-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
If period is assigned to 0, limit timer will expire immediately.
It causes a qemu warning:
"main-loop: WARNING: I/O thread spun for 1000 iterations"
This limit is meaningless. This patch forbids to assign 0 to period.
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385031203-23790-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
pc-bios/s390-zipl.rom is a flat image so it's expected that
loading it as elf will fail.
It should fall back on loading a flat file, but doesn't
on 32 bit systems, instead it fails printing:
qemu: hardware error: could not load bootloader 's390-zipl.rom'
The result is boot failure.
The reason is that a 64 bit unsigned interger which is set
to -1 on error is compared to -1UL which on a 32 bit system
with gcc is a 32 bit unsigned interger.
Since both are unsigned, no sign extension takes place and
comparison evaluates to non-equal.
There's no reason to do clever tricks: all functions
we call actually return int so just use int.
And then we can use == -1 everywhere, consistently.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20131121133426.GA30827@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Jan Kiszka (1) and others
# Via Gleb Natapov
* qemu-kvm/uq/master:
kvm: Fix uninitialized cpuid_data
pci-assign: Remove dead code for direct I/O region access from userspace
KVM: x86: fix typo in KVM_GET_XCRS
Message-id: cover.1385040432.git.gleb@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Sebastian Macke
# Via Jia Liu
* jliu/or32:
target-openrisc: Correct carry flag check of l.addc and l.addic test cases
target-openrisc: Correct memory bounds checking for the tlb buffers
openrisc-timer: Reduce overhead, Separate clock update functions
target-openrisc: Correct wrong epcr register in interrupt handler
target-openrisc: Remove executable flag for every page
target-openrisc: Remove unnecessary code generated by jump instructions
target-openrisc: Speed up move instruction
Message-id: 1384958318-9145-1-git-send-email-proljc@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This reverts commit cd5be5829c.
Digging into hardware specs shows this does not
actually make QEMU behave more like hardware:
There are valid arguments backed by the spec to indicate why the version
of e1000 prior to cd5be582 was more correct: the high byte actually
includes a valid bit, this is why all guests write it last.
For rtl8139 there's actually a separate undocumented valid bit, but we
don't implement it yet.
To summarize all the drivers we know about behave in one way
that allows us to make an assumption about write order and avoid
spurious, incorrect mac address updates to the monitor.
Let's stick to the tried heuristic for 1.7 and
possibly revisit for 1.8.
Reported-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
g_array_get_element_size was only added in glib 2.14,
there's no way to find element size in with an older glib.
Fortunately we only use a single table (linker) where element size > 1.
Switch element size to 1 everywhere, then we can just look at len field
to get table size in bytes.
Add an assert to make sure we catch any violations of this rule.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
g_string_vprintf was only introduced in 2.24 so switch to vsnprintf
instead. A bit uglier but name size is fixed at 4 bytes here so it's
easy.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc-bios/s390-zipl.rom is a flat image so it's expected that
loading it as elf will fail.
It should fall back on loading a flat file, but doesn't
on 32 bit systems, instead it fails printing:
qemu: hardware error: could not load bootloader 's390-zipl.rom'
The result is boot failure.
The reason is that a 64 bit unsigned interger which is set
to -1 on error is compared to -1UL which on a 32 bit system
with gcc is a 32 bit unsigned interger.
Since both are unsigned, no sign extension takes place and
comparison evaluates to non-equal.
There's no reason to do clever tricks: all functions
we call actually return int so just use int.
And then we can use == -1 everywhere, consistently.
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The mtspr and mfspr routines didn't check for the correct memory boundaries.
This fixes a segmentation fault while booting Linux.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
The clock value is only evaluated when really necessary reducing
the overhead of the timer handling.
This also solves a problem in the way the Linux kernel
handles the timer and the expected accuracy.
The old version could lead to inaccurate timings.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
This patch corrects several misbehaviors during an interrupt process.
Most of the time the pc is already correct and therefore no special treatment
of the exceptions is necessary.
Tested by checking crashing programs which otherwise work in or1ksim.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
Pages should be flagged executable only if the tlb executable flag is
set or the mmu is off.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
The sr_f variable is only used for the l.bf and l.bnf instructions.
For clarity the code is also rewritten using a switch statement instead
of if chaining.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
The OpenRISC architecture does not have its own move register
instruction. Instead it uses either "l.addi rd, r0, x" or
"l.ori rd, rs, 0" or "l.or rd, rx, r0"
The l.ori instruction is automatically optimized but not the l.addi instruction.
This patch optimizes for this special case.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
In qemu_put_buffer(), bytes_xfer += size is wrong, it will be more
than expected, and should be bytes_xfer += l.
Signed-off-by: zhangmin <zhangmin6@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
QOM infrastructure fixes for 1.7
* QOM memory leak fix
# gpg: Signature made Tue 19 Nov 2013 01:58:58 AM PST using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Vlad Yasevich
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony:
qom: Fix memory leak in object_property_set_link()
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-ia64-17:
tcg-ia64: Introduce tcg_opc_bswap64_i
tcg-ia64: Introduce tcg_opc_ext_i
tcg-ia64: Introduce tcg_opc_movi_a
tcg-ia64: Introduce tcg_opc_mov_a
tcg-ia64: Use A3 form of logical operations
tcg-ia64: Use SUB_A3 and ADDS_A4 for subtraction
tcg-ia64: Use ADDS for small addition
tcg-ia64: Avoid unnecessary stop bit in tcg_out_alu
tcg-ia64: Move AREG0 to R32
tcg-ia64: Simplify brcond
tcg-ia64: Handle constant calls
tcg-ia64: Use shortcuts for nop insns
tcg-ia64: Use TCGMemOp within qemu_ldst routines
Message-id: 1384811395-7097-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
pc last minute fixes for 1.8
This has a patch that drops an unused FW CFG entry.
I think it's best to include it before 1.7 to avoid
the need to maintain it in compat machine types.
There's also a doc bugfix by Amos: I'm guessing
doc fixes are still fair game even at this late stage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 18 Nov 2013 03:48:14 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Amos Kong (1) and Igor Mammedov (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
doc: fix hardcoded helper path
pc: disable pci-info
Message-id: 1384775449-6693-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Block fixes for 1.7.0
# gpg: Signature made Fri 15 Nov 2013 09:51:25 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
# By Max Reitz (3) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony:
block: Fail if requested driver is not available
MAINTAINERS: add block driver sub-maintainers
qemu-img: Fix overwriting 'ret' before using
qemu-iotests: Test qcow2 count_contiguous_clusters()
qcow2: fix possible corruption when reading multiple clusters
qmp: access the local QemuOptsLists for drive option
MAINTAINERS: add block tree repo URLs
qemu-iotests: Extend 041 for unbacked mirroring
block/drive-mirror: Check for NULL backing_hd
qapi-schema: Update description for NewImageMode
block: Print its file name if backing file opening failed
Message-id: 1384537999-5972-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Patch queue for ppc - 2013-11-08
These are two patches that will hopefully make it into 1.7. The SLOF update
fixes -append kernel command line argument passing into the guest kernel. The
other patch makes VIO devices appear when using -device '?'.
# gpg: Signature made Thu 07 Nov 2013 07:34:54 PM PST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
# By Alexey Kardashevskiy
# Via Alexander Graf
* agraf/tags/signed-ppc-for-upstream-1.7:
pseries: Update SLOF firmware image
spapr: add vio-bus devices to categories
Message-id: 1383881766-13958-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The madvise for zeroed out pages was introduced when every transferred
zero page was memset to zero and thus allocated. Since commit
211ea740 we check for zeroness of a target page before we memset
it to zero. Additionally we memmap target memory so it is essentially
zero initialized (except for e.g. option roms and bios which are loaded
into target memory although they shouldn't).
It was reported recently that this madvise causes a performance degradation
in some situations. As the madvise should only be called rarely and if it's called
it is likely on a busy page (it was non-zero and changed to zero during migration)
drop it completely.
Reported-By: Zhang Haoyu <haoyu.zhang@huawei.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This avoids each test needing to add it to suppress windows popping up.
[Commit 7ceeedd016 ("blockdev-test: add
test case for drive_add duplicate IDs") and commit
43cd209803 ("qdev-monitor-test: add
device_add leak test cases") added qtest tests without specifying
-display none.
As a result, "make check" now tries to use graphics (GTK or SDL). Since
graphics are not used by the test and inappropriate for headless "make
check" runs, add the missing -display none.
This fixes "make check" in the QEMU buildbot.
-- Stefan]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The install directory of qemu-bridge-helper is configurable,
but we use a fixed path in the documentation.
DEFAULT_BRIDGE_HELPER macro isn't available in texi mode,
we should always use "/path/to/" prefix for dynamic paths
(e.g.: /path/to/image, /path/to/linux, etc).
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Being able to "extend" from 64-bits (with a mov) simplifies
a few places where the conditional breaks the train of thought.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can and/or/xor/andcm small constants, saving one cycle.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can subtract from more small constants that just 0 with one insn,
and we can add the negative for most small constants.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Avoids a wasted cycle loading up small constants.
Simplify the code assuming the tcg optimizer is going to work
and don't expect the first operand of the add to be constant.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When performing an operation with two input registers, we'd leave
the stop bit (and thus an extra cycle) that's only needed when one
or the other input is a constant.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since the move away from the global areg0, we're no longer globally
reserving areg0. Which means our use of R7 clobbers a call-saved
register. Shift areg0 into the windowed registers. Indeed, choose
the incoming parameter register that it comes to us by.
This requires moving the register holding the return address elsewhere.
Choose R33 for tidiness.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There was a misconception that a stop bit is required between a compare
and the branch that uses the predicate set by the compare. This lead to
the usage of an extra bundle in which to perform the compare. The extra
bundle left room for constants to be loaded for use with the compare insn.
If we pack the compare and the branch together in the same bundle, then
there's no longer any room for non-zero constants. At which point we
can eliminate half the function by not handling them.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Using only indirect calls results in 3 bundles (one to load the
descriptor address), and 4 stop bits. By looking through the
descriptor to the constants, we can perform the call with 2
bundles and only 1 stop bit.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There's no need to go through the full opcode-to-insn function call
to generate nops. This makes the source a bit more readable.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
$(PYTHON) is a Make variable which is set by configure.
In all other places over the tree, .py files are run from
Makefiles using this variable, except of a single leftover
in hw/i386/Makefile.obj (and a nearby place in there uses
$(PYTHON) correctly). Fix this leftover too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by:: Stefan Weil <sw@weilnetz.de>
Commit 1d984a67a9 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.
Now configure adds -B only if it is accepted by the Python interpreter.
This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For now guest agent uses following command to shutdown system:
shutdown -P +0 "blabla"
but this syntax works only with shutdown command from systemd or upstart,
because SysV shutdown requires -h switch.
Following patch changes the command so it works with systemd, upstart and SysV
With upstart/systemd qga use one of thee commands, depending on 'mode' parameter:
shutdown -P +0 "..."
shutdown -H +0 "..."
shutdown -r +0 "..."
SysV equivalents for these are:
shutdown -h -P +0 "..."
shutdown -h -H +0 "..."
shutdown -h -r +0 "..."
and these retain their meaning with upstart/systemd.
According to FreeBSD manpages, shutdown does not accept -P and -H options. Commands should be:
shutdown -p +0 "..."
shutdown -h +0 "..."
shutdown -r +0 "..."
shutdown in Solaris does not accept any of -hHpPr and does not accept time in "+0" format
Signed-off-by: Michael Avdienko <whitearchey@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If an explicit driver option is present, but doesn't specify a valid
driver, then bdrv_open() should fail instead of probing the format.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
There are a number of contributors who maintain block drivers (image
formats and protocols). They should be listed in the MAINTAINERS file
so that get_maintainer.pl lists them.
Note that commits are still merged through Kevin or Stefan's block tree
but the block driver sub-maintainers are usually the ones to review
patches.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Stefan Weil <sw@weilnetz.de>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jeff Cody <jcody@redhat.com>
Acked-by: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch moves ret assignment after reporting original error.
We were lucky to pass qemu-iotests 048 (qemu-img compare case) but when
I tried to run with TEST_DIR=/tmp (tmpfs), it fails with a "wrong"
mismatch offset. This fixes two bugs.
In the first if branch, setting ret to 1 before using it makes dead code
in the next line: pnum is never added to mismatch offset even if ret was
0.
In the other if branch, currently the output error is always -4:
strerror(-4) -> Unknown error -4
Added regression test in case 048.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
In case the smc91c111 interface signals that it cannot receive more
packets the packets are queued and further reception will be disabled.
In case the interface is again ready to receive packets notify the upper
layer.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
if multiple sectors spanning multiple clusters are read the
function count_contiguous_clusters should ensure that the
cluster type should not change between the clusters.
Especially the for-loop should break when we have one
or more normal clusters followed by a compressed cluster.
Unfortunately the wrong macro was used in the mask to
compare the flags.
This was discovered while debugging a data corruption
issue when converting a compressed qcow2 image to raw.
qemu-img reads 2MB chunks which span multiple clusters.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].
This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new test case in file 041 for mirroring unbacked images in
"absolute-paths" mode. This should work, if possible, but most
importantly, qemu should never crash.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It should be possible to execute the QMP "drive-mirror" command in
"none" sync mode and "absolute-paths" mode even for block devices
lacking a backing file.
"absolute-paths" does in fact not require a backing file to be present,
as can be seen from the "top" sync mode code path. "top" basically
states that the device should indeed have a backing file - however, the
current code catches the case if it doesn't and then simply treats it as
"full" sync mode, creating a target image without a backing file (in
"absolute-paths" mode). Thus, "absolute-paths" does not imply the target
file must indeed have a backing file.
Therefore, the target file may be left unbacked in case of "none" sync
mode as well, if the specified device is not backed either. Currently,
qemu will crash trying to dereference the backing file pointer since it
assumes that it will always be non-NULL in that case ("none" with
"absolute-paths").
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the NewImageMode is "absolute-paths" but no backing file is available
(e.g., when mirroring a device with an unbacked image), the target image
will not be backed either. This patch updates the documentation in
qapi-schema.json accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If backing file doesn't exist, the error message is confusing and
misleading:
$ qemu /tmp/a.qcow2
qemu: could not open disk image /tmp/a.qcow2: Could not open file: No
such file or directory
But...
$ ls /tmp/a.qcow2
/tmp/a.qcow2
$ qemu-img info /tmp/a.qcow2
image: /tmp/a.qcow2
file format: qcow2
virtual size: 8.0G (8589934592 bytes)
disk size: 196K
cluster_size: 65536
backing file: /tmp/b.qcow2
Because...
$ ls /tmp/b.qcow2
ls: cannot access /tmp/b.qcow2: No such file or directory
This is not intuitive. It's better to have the missing file's name in
the error message. With this patch:
$ qemu-io -c 'read 0 512' /tmp/a.qcow2
qemu-io: can't open device /tmp/a.qcow2: Could not open backing
file: Could not open '/stor/vm/arch.raw': No such file or directory
no file open, try 'help open'
Which is a little bit better.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BIOS that we ship in 1.7 does not use pci info
from host and so far isn't going to use it.
Taking in account problems it caused see 9604f70fdf and
to avoid future incompatibility issues, it's safest to
disable that interface by default for all machine types
including 1.7 as it was never exposed/used by guest.
And properly remove/cleanup it during 1.8 development cycle.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Luiz Capitulino (1) and Richard Henderson (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
MAINTAINERS: add git tree info for HMP, QMP and QAPI
Adjust qapi-visit for python-2.4.3
Message-id: 1384281985-11100-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
pci, pc, virtio bug fixes
This reverts PCI master abort support - we'll want it
eventually but it exposes too many core bugs to be safe for 1.7.
This also reverts a recent exec.c change that was an
attempt to work-around some of these core bugs.
Also included are small fixes in pc and virtio,
and a core loader fix for PPC bamboo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 10 Nov 2013 05:13:22 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
Revert "exec: limit system memory size"
Revert "hw/pci: partially handle pci master abort"
loader: drop return value for rom_add_blob_fixed
acpi-build: disable with -no-acpi
virtio-net: only delete bh that existed
Fix pc migration from qemu <= 1.5
Message-id: 1384159176-31662-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Dmitry Fleytman (1) and others
# Via Stefan Hajnoczi
* stefanha/net:
virtio-net: broken RX filtering logic fixed
net: fix qemu_flush_queued_packets() in presence of a hub
net: disallow to specify multicast MAC address
Message-id: 1383928804-28866-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Jeff Cody (26) and others
# Via Stefan Hajnoczi
* stefanha/block: (37 commits)
block: Round up total_sectors
block: vhdx qemu-iotest - log replay of data sector
block: qemu-iotests for vhdx, add write test support
block: vhdx - update _make_test_img() to filter out vhdx options
block: vhdx - add .bdrv_create() support
block: vhdx - fix comment typos in header, fix incorrect struct fields
block: vhdx - break out code operations to functions
block: vhdx - move more endian translations to vhdx-endian.c
block: vhdx - remove BAT file offset bit shifting
block: vhdx write support
block: vhdx - add log write support
block: vhdx - add region overlap detection for image files
block: vhdx - log parsing, replay, and flush support
block: vhdx code movement - move vhdx_close() above vhdx_open()
block: vhdx - update log guid in header, and first write tracker
block: vhdx - break endian translation functions out
block: vhdx - log support struct and defines
block: vhdx code movement - VHDXMetadataEntries and BDRVVHDXState to header.
block: vhdx - add header update capability.
block: vhdx - minor comments and typo correction.
...
Message-id: 1383905551-16411-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Two small fixes for 1.7:
- add missing debug feature to dc233c xtensa core;
- fix qemu abort caused by gdb attempt to invalidate a breakpoint by
virtual address for which there's no mapping.
# gpg: Signature made Thu 07 Nov 2013 09:32:19 PM PST using RSA key ID F83FA044
# gpg: Can't check signature: public key not found
# By Max Filippov
# Via Max Filippov
* filippov/tags/20131108-xtensa:
target-xtensa: add missing DEBUG section to dc233c config
exec: fix breakpoint_invalidate when pc may not be translated
Message-id: 1383889643-21621-1-git-send-email-jcmvbkbc@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Stefan Weil
# Via Stefan Weil
* sweil/mingw:
linux-user: Fix stat64 syscall for SPARC64
configure: Add config.status to recreate the current configuration
nsis: Improved support for parallel installation of 32 and 64 bit code
Message-id: 1383804909-376-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The local function console_print_text_attributes is no longer used since
commit 7d6ba01c37.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While MinGW-w64 can compile the qga code, MinGW from Debian lenny
(gcc-mingw32 4.4.2-3) shows these errors:
In file included from qga/vss-win32.c:17:
qga/vss-win32/requester.h:31:
error: expected »=«, »,«, »;«, »asm« or »__attribute__« before »requester_init«
qga/vss-win32/requester.h:32:
error: expected »=«, »,«, »;«, »asm« or »__attribute__« before »requester_deinit«
The macro STDAPI is unknown, so add the missing include file which
defines it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This adds a build matrix definition for travis-ci.org continuous
integration service. It is usable on any public repository hosted on
GitHub. Once you have created an account signed into Travis you can
enable it on selected projects via travis-ci.org/profile. Alternatively
you can configure the service hooks on GitHub via the repository
Settings tab,then Service Hooks and selecting Travis.
Once setup Travis will automatically test every push as well as any pull
requests submitted to that repository.
The build matrix is currently split by target architecture (see TARGETS
environment variable) because a full build of QEMU can take some time.
This way you get quick feedback for any obvious errors. The additional
environment variables exist to allow additional builds to tweak the
environment. These are:
EXTRA_CONFIG - extra terms passed to configure
EXTRA_PKGS - extra dev packages to install
TEST_CMD - default "make check", can be overridden
I've confined the additional stuff to x86/x86_64 for convenience.
As Travis supports clang the main builds are done twice (once for gcc
and once for clang). However clang is disabled for the debug/trace
builds for the purposes of brevity.
Other wrinkles:
* The lttng user-space tracing back-end is disabled
(it is currently horribly broken)
* The ftrace back-end doesn't run "make check"
(it requires a mounted debugfs to work)
* There are two debug enabled build (with and without TCG interpreter)
Signed-off-by: Alex Bennée <alex@bennee.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using multiple calls to error_report here means every line is
prefaced with the (potentially long) pci-assign command line
arguments.
Use a single error_printf to preserve the intended formatting.
Since this code path is always preceded by an error_report call,
we don't lose the command line reporting.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The following error occurs when building with no graphic output support:
vl.c: In function ‘main’:
vl.c:2829:19: error: variable ‘ds’ set but not used [-Werror=unused-but-set-variable]
DisplayState *ds;
^
cc1: all warnings being treated as errors
To reproduce this issue, just run:
$ ./configure \
--disable-curses \
--disable-sdl \
--disable-cocoa \
--disable-gtk \
--disable-vnc \
--enable-werror
$ make vl.o
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds all missing characters used in regional keymap
files which already exist in QEMU. I checked for the missing
characters by going through all of the keymaps and matching that
with records in vnc_keysym.h. If the key wasn't found I looked
it up in libxkbcommon library [1]. If I understood it correctly
this is also the same place where most of the keymaps were
exported from according to the comment on the first line in those
files. I was able to find all symbols except "quotebl" used
in Netherland keymap.
I tested this update with Czech keyboard by myself. I also asked
Matej Serc to test Slovenian keyboard layout - he reported problems
with it few days ago on this mailing list. Both layouts seems
to work fine. I wasn't able to test the remaining layouts but
since this change doesn't modify any existing symbols, just adds
new ones, I don't expect any sideeffects.
[1] http://cgit.freedesktop.org/xorg/lib/libxkbcommon
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds support for Unicode symbols in keymap files. This
feature was already used in some keyboard layouts in QEMU generated
from XKB (e.g. Arabic) but it wasn't implemented in QEMU source code.
There is no need for check of validity of the hex string after U character
because strtol returns 0 in case the conversion was unsuccessful.
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds Czech keyboard layout to available keymap files
and Makefile.
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds missing Czech characters to the VNC keysym table.
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We say we support python 2.4, but python 2.4.3 does not
support the "expr if test else expr" syntax used here.
This allows QEMU to compile on RHEL 5.3, the last release for ia64.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This reverts commit 818f86b883.
This was a work-around for bugs elsewhere in the system,
exposed by commit a53ae8e934:
"hw/pci: partially handle pci master abort"
since that's reverted now, the work-around is not required for 1.7
anymore.
The proper fix is supporting full 64 bit addresses in the radix tree.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
This reverts commit a53ae8e934.
The patch being reverted introduced a low-priority memory region
covering all 64 bit pci address space. This exposed the following bugs
elsewhere in the code:
1. Some memory regions have INT64_MAX size, where the
intent was all 64 bit address space.
This results in a sub-page region, should be UINT64_MAX.
2. page table rendering in exec.c ignores physical address bits
above TARGET_PHYS_ADDR_SPACE_BITS.
Access outside this range (e.g. from device DMA, or gdb stub)
ends up with a wrong region. Registering a region outside this
range leads to page table corruption.
3. Some regions overlap PCI hole and have same priority.
This only works as long as no device uses the overlapping address.
It doesn't look like we can resolve all issues in time for 1.7.
Let's fix the bugs first and apply afterwards for 1.8.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
rom_add_blob never fails, and neither does rom_add_blob_fixed,
so there's no need to return value from it.
In fact, rom_add_blob_fixed was erroneously returning -1 unconditionally
which made the only system that checked the return value -M bamboo fail
to start.
Drop the return value and drop checks from ppc440_bamboo to
fix this failure.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU will currently crash if started with -no-acpi flag
since acpi build code probes the PM device which isn't present
in this configuration.
To fix, don't expose ACPI tables to guest when acpi has been
disabled from command line.
Fixes LP# 1248854
https://bugs.launchpad.net/qemu/+bug/1248854
Reported-by: chao zhou <chao.zhou@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
We delete without check whether it existed during exit. This will lead NULL
pointer deference since it was created conditionally depends on guest driver
status and features. So add a check of existence before trying to delete it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following commit introduced a migration incompatibility:
commit 568f0690fd
Author: David Gibson <david@gibson.dropbear.id.au>
Date: Thu Jun 6 18:48:49 2013 +1000
pci: Replace pci_find_domain() with more general pci_root_bus_path()
The issue is that i440fx savevm idstr went from 0000:00:00.0/I440FX to
0000:00.0/I440FX. Unfortunately we are stuck with the breakage for
1.6 machine types.
Add a compat property to maintain the busted idstr for the 1.6 machine
types, but revert to the old style format for 1.7+, and <= 1.5.
Tested with migration from qemu 1.5, qemu 1.6, and qemu.git.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Upon processing of VIRTIO_NET_CTRL_MAC_TABLE_SET command
multicast list overwrites unicast list in mac_table.
This leads to broken logic for both unicast and multicast RX filtering.
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not return after net_hub_flush(). Always flush callee network client
incoming queue.
Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Assigning a multicast MAC address to a NIC leads to confusing behavior.
Reject multicast MAC addresses so users are alerted to their error
straight away.
The "net/eth.h" in6_addr rename prevents a name collision with
<netinet/in.h> on Linux.
-- Stefan]
Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since b94a2610, bdrv_getlength() is omitted when probing image. VMDK
monolithicFlat is broken by that because a file < 512 bytes can't be
read with its total_sectors truncated to 0. This patch round up the size
to BDRV_SECTOR_SIZE, when a image size is not sector aligned.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
SLOF git commit is e2e8ac901e617573ea383f9cffd136146d0675a4
The main changes are:
* fixed bug with not passing arguments from -append
* client-architecture-support hypercall
* netboot
* USB stack fixes
The full list of changes:
> client-architecture-support: fix wrong version read
> client-architecture-support: fix redundant stack drop
> Update device tree returned by CAS hypercall
> fdt: introduce fdt-init
> Add ibm,client-architecture-support method
> Kernel parameter passed from qemu commandline ignored
> Allow more than one client to open net devices simultaneously
> ci: add missing close in else condition
> Add GPT support
> pci: fix interrupt-map for bridges
> usb-ohci: preserve the toggleCarry bit in ED
> usb-ohci: done_head processing fixes
> usb-ohci: update init and rationalize timings
> usb-msc: handle stall and other fixes
> scsi: make probe more error resilient
> usb-core: Add CLEAR FEATURE api
> Implement range allocator
> Remove bcm57xx network driver as module
> Remove e1000 network driver as module
> Remove virtio-net network driver as module
> Remove veth network driver as module
> Add missing close-dev in ping
> Remove lodable network driver modules and related functions
> Add bcm57xx network driver in libbcm
> Add e1000 network driver in libe1k
> Add virtio-net driver in libvirtio
> Add veth driver in libveth
> Get MAC address for client interface module
> Add SLOF usleep wrapper
> Add SLOF pci wrapper functions
> Fix 'canon' client interface
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
In order to get devices appear in output of
"./qemu-system-ppc64 -device ?",
they must be assigned to one of DEVICE_CATEGORY_XXXX.
This puts VIO devices classes to corresponding categories.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This tests the replay of a data sector in a VHDX image file.
The image file is a 10G dynamic image, with 4MB block size. The
image was created with qemu-img, and the log left unplayed by
modification of the vhdx image format driver.
It was verified under both QEMU and Hyper-V that the image file,
post log replay, matched.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This removes the IMGFMT_GENERIC blocker for read-only, so existing
iotests run read/write tests for vhdx images created by qemu-img (e.g.
tests 001, 002, 003).
In addition, this updates the sample image test for the Hyper-V
created image, to verify we can write it as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The non-global option output is suppresed in _make_test_img() for
output verification in the 0?? tests. This adds suppression for
the vhdx-unique options as well. This allows check -vhdx to run
successfully.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for VHDX image creation, for images of type "Fixed"
and "Dynamic". "Differencing" types (i.e., VHDX images with backing
files) are currently not supported.
Options for image creation include:
* log size:
The size of the journaling log for VHDX. Minimum is 1MB,
and it must be a multiple of 1MB. Invalid log sizes will be
silently fixed by rounding up to the nearest MB.
Default is 1MB.
* block size:
This is the size of a payload block. The range is 1MB to 256MB,
inclusive, and must be a multiple of 1MB as well. Invalid sizes
and multiples will be silently fixed. If '0' is passed, then
a sane size is chosen (depending on virtual image size).
Default is 0 (Auto-select).
* subformat:
- "dynamic"
An image without data pre-allocated.
- "fixed"
An image with data pre-allocated.
Default is "dynamic"
When creating the image file, the lettered sections are created:
-----------------------------------------------------------------.
| (A) | (B) | (C) | (D) | (E)
| File ID | Header1 | Header 2 | Region Tbl 1 | Region Tbl 2
| | | | |
.-----------------------------------------------------------------.
0 64KB 128KB 192KB 256KB 320KB
.---- ~ ----------- ~ ------------ ~ ---------------- ~ -----------.
| (F) | (G) | (H) |
| Journal Log | BAT / Bitmap | Metadata | .... data ......
| | | |
.---- ~ ----------- ~ ------------ ~ ---------------- ~ -----------.
1MB (var.) (var.) (var.)
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VHDXPage83Data and VHDXParentLocatorHeader both incorrectly had their
MSGUID fields set as arrays of 16. This is incorrect (it stems from
an early version where those fields were uint_8 arrays). Those fields
were, up to this patch, unused.
Also, there were a couple of typos and incorrect wording in comments,
and those have been fixed up as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is preperation for vhdx_create(). The ability to write headers,
and calculate the number of BAT entries will be needed within the
create() functions, so move this relevant code into helper functions.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for vhdx_create(), move more endian translation
functions out to vhdx-endian.c.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Bit shifting can be fun, but in this case it was unnecessary. The
upper 44 bits of the 64-bit BAT entry is specifies the File Offset,
so we shifted the bits to get access to the value.
However, per the spec the value is in MB. So we dutifully shifted back
to the left by 20 bits, to convert to a true uint64_t file offset.
This replaces those steps with just a bit mask, to get rid of the lower
20 bits instead.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for writing to VHDX image files, using coroutines.
Writes into the BAT table goes through the VHDX log. Currently, BAT
table writes occur when expanding a dynamic VHDX file, and allocating a
new BAT entry.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for writing to the VHDX log.
For spec details, see VHDX Specification Format v1.00:
https://www.microsoft.com/en-us/download/details.aspx?id=34750
There are a few limitations to this log support:
1.) There is no caching yet
2.) The log is flushed after each entry
The primary write interface, vhdx_log_write_and_flush(), performs a log
write followed by an immediate flush of the log.
As each log entry sector is a minimum of 4KB, partial sector writes are
filled in with data from the disk write destination.
If the current file log GUID is 0, a new GUID is generated and updated
in the header.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Regions in the image file cannot overlap - the log, region tables,
and metdata must all be unique and non-overlapping.
This adds region checking by means of a QLIST; there can be a variable
number of regions and metadata (there may be metadata or region tables
that we do not recognize / know about, but are not required).
This adds the capability to register a region for later checking, and
to check against registered regions for any overlap.
Also, if neither the BAT or Metadata region tables are found, return
error.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for VHDX v0 logs, as specified in Microsoft's
VHDX Specification Format v1.00:
https://www.microsoft.com/en-us/download/details.aspx?id=34750
The following support is added:
* Log parsing, and validation - validate that an existing log
is correct.
* Log search - search through an existing log, to find any valid
sequence of entries.
* Log replay and flush - replay an existing log, and flush/clear
the log when complete.
The VHDX log is a circular buffer, with elements (sectors) of 4KB.
A log entry is a variably-length number of sectors, that is
comprised of a header and 'descriptors', that describe each sector.
A log may contain multiple entries, know as a log sequence. In a log
sequence, each log entry immediately follows the previous entry, with an
incrementing sequence number. There can only ever be one active and
valid sequence in the log.
Each log entry must match the file log GUID in order to be valid (along
with other criteria). Once we have flushed all valid log entries, we
marked the file log GUID to be zero, which indicates a buffer with no
valid entries.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow tracking of first file write in the VHDX image, as well as
the ability to update the GUID in the header. This is in preparation
for log support.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This moves the endian translation functions out from the vhdx.c source,
into a separate source file. In addition to the previously defined
endian functions, new endian translation functions for log support are
added as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds some magic number defines, and internal structure definitions
for VHDX log replay support. The struct VHDXLogEntries does not reflect
an on-disk data structure, and thus does not need to be packed.
Some minor code style fixes are applied as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for VHDX log support, move these structures to the
header.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds the ability to update the headers in a VHDX image, including
generating a new MS-compatible GUID.
As VHDX depends on uuid.h, VHDX is now a configurable build option. If
VHDX support is enabled, that will also enable uuid as well. The
default is to have VHDX enabled.
To enable/disable VHDX: --enable-vhdx, --disable-vhdx
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just a couple of minor comments to help note where allocated
buffers are freed, and a typo fix.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
error_setg_errno() may overwrite errno; therefore, its value should be
read before calling that function and not afterwards.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Ensure that the device_add error code path deletes device objects.
Failure to do so not only leaks the objects but can also keep other
objects (like drive or netdev) alive due to qdev properties holding
references.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The following should work:
(qemu) drive_add if=none,id=drive0
(qemu) drive_del drive0
(qemu) drive_add if=none,id=drive0
Previous versions of QEMU produced a duplicate ID error because
drive_add leaked the options.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a qtest qmp() function that returns the response object. This
allows test cases to verify the result or to check for error responses.
It also allows waiting for QMP events.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Existing qmp() callers do not expect a response object. In order to
implement real QMP test cases it will be necessary to inspect the
response object.
Rename qmp() to qmp_discard_response(). Later patches will introduce a
qmp() function that returns the response object and tests that use it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
These memory leaks also make drive_add if=none,id=drive0 without a file=
option leak the options list. This keeps ID "drive0" around forever.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When creating images with backing files in the test, the backing
file argument was not quoted properly. This caused the test to fail
when run from a pathname with a space. Pass the backing argument in
with the -b option to _make_test_img, so it can be properly quoted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There were still a couple of instances of unquoted usage of
$TEST_IMG and $TEST_IMG.orig. Quoted these so they will not fail
on pathnames with spaces in them.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test 039 had $TEST_IMG with duplicate double quotes - remove duplicate.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There were still instances of $TEST_IMG not being properly quoted.
This was in the usage of a string built up for a 'for' loop; modify
the loop so we can quote $TEST_IMG properly.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
$TEST_IMG.base is used unquoted. Add quotes so that pathnames with
spaces are supported.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
_make_test_img() currently works with spaced pathnames only when not
specifying a backing file. This fixes it so that the backing file
argument is properly quoted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The usage of $TEST_IMG was not properly quoted everywhere in
common.pattern.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The below patch is needed to compile qemu trunk on FreeBSD with gcc48,
clang will fail.... ;). Host x84_64-freebsd.
Signed-off-by: Andreas Tobler <andreast@FreeBSD.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The actual size of the image file may differ depending on the Linux
kernel currently running on the host. Filtering out this value makes
this test pass in such cases.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check whenever the device path (/dev/dsp by default) exists and qemu is
allowed to access it. Return NULL if it isn't, so ossaudio will not
be used on systems wihtout oss support (increasinly common on modern
linux systems).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This error was reported by valgrind when running qemu-system-x86_64
with kvm:
==975== Conditional jump or move depends on uninitialised value(s)
==975== at 0x521C38: cpuid_find_entry (kvm.c:176)
==975== by 0x5235BA: kvm_arch_init_vcpu (kvm.c:686)
==975== by 0x4D5175: kvm_init_vcpu (kvm-all.c:267)
==975== by 0x45035B: qemu_kvm_cpu_thread_fn (cpus.c:858)
==975== by 0xD361E0D: start_thread (pthread_create.c:311)
==975== by 0xD65E9EC: clone (clone.S:113)
==975== Uninitialised value was created by a stack allocation
==975== at 0x5226E4: kvm_arch_init_vcpu (kvm.c:446)
Instead of adding more memset calls for parts of cpuid_data, the existing
calls were removed and cpuid_data is now initialized completely in one
call.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This feature was already deprecated back then in qemu-kvm, ie. before
pci-assign went upstream. assigned_dev_ioport_rw will never be invoked
with resource_fd < 0.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Some targets use a stat64 structure for the stat64 syscall while others
use a stat structure. SPARC64 used the wrong kind.
Instead of extending the conditional compilation in syscall.c, now a
macro TARGET_HAS_STRUCT_STAT64 is defined whenever a target has a
target_stat64.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Erik de Castro Lopo <erikd@mega-nerd.com>
The latest configure invocation was saved in config-host.mak and could
be extracted from that file to recreate the configuration.
Now it is saved in a new file config.status which can be directly executed
to recreate the configuration. The file name and the comments were copied
from GNU autoconf.
Makefile now uses config.status, but also includes transitional code
for the old mechanism.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
32 and 64 bit variants of QEMU already had different default installation
directories, but used a common registry key for saving the choosen
directory. This is confusing for users who want to install both variants,
so fix it by using different registry keys.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Stop/cont commands are broken with -icount due to a deadlock. The
real problem is that the computation of timers_state.cpu_ticks_offset
makes no sense with -icount enabled: we set it to an icount clock value
in cpu_disable_ticks, and subtract a TSC (or similar, whatever
cpu_get_real_ticks happens to return) value in cpu_enable_ticks.
The fix is simple. timers_state.cpu_ticks_offset is only used
together with cpu_get_real_ticks, so we can use cpu_get_real_ticks
in cpu_disable_ticks. There is no need to update cpu_ticks_prev
at the time cpu_disable_ticks is called; instead, we can do it
the next time cpu_get_ticks is called.
The change to cpu_disable_ticks is the important part of the patch.
The rest modifies the code to always check timers_state.cpu_ticks_prev,
even when the ticks are not advancing (i.e. the VM is stopped). It also
makes a similar change to cpu_get_clock_locked, so that the code remains
similar for cpu_get_ticks and cpu_get_clock_locked.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1382977938-13844-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We currently just update the HMP NIC info when the last bit of macaddr
is written. This assumes that guest driver will write all the macaddr
from bit 0 to bit 5 when it changes the macaddr, this is the current
behavior of linux driver (e1000/rtl8139cp), but we can't do this
assumption.
The macaddr that is used for rx-filter will be updated when every bit
is changed. This patch updates the e1000/rtl8139 nic to update HMP NIC
info when every bit is changed. It will be same as virtio-net.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-id: 1383650238-16015-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
After calling dpy_gfx_replace_surface(s->con, surface), the outer
surface is invalid.
==5370== Invalid read of size 4
==5370== at 0x460229: surface_bits_per_pixel (console.h:250)
==5370== by 0x466A81: get_depth_index (vga.c:1173)
==5370== by 0x467EC2: vga_draw_graphic (vga.c:1718)
==5370== by 0x4687A5: vga_update_display (vga.c:1914)
==5370== by 0x2A782E: qxl_hw_update (qxl.c:1766)
==5370== by 0x3EB83B: graphic_hw_update (console.c:254)
==5370== by 0x3FBE31: qemu_spice_display_refresh (spice-display.c:418)
==5370== by 0x2A7D01: display_refresh (qxl.c:1886)
==5370== by 0x3EEE1C: dpy_refresh (console.c:1436)
==5370== by 0x3EB543: gui_update (console.c:192)
==5370== by 0x3C43B3: timerlist_run_timers (qemu-timer.c:488)
==5370== by 0x3C4416: qemu_clock_run_timers (qemu-timer.c:499)
==5370== Address 0x22ffb1e0 is 0 bytes inside a block of size 56 free'd
==5370== at 0x4A074C4: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==5370== by 0x4245FC: free_and_trace (vl.c:2771)
==5370== by 0x50899AE: g_free (gmem.c:252)
==5370== by 0x3EE8D3: qemu_free_displaysurface (console.c:1332)
==5370== by 0x3EEDB7: dpy_gfx_replace_surface (console.c:1427)
==5370== by 0x467EB6: vga_draw_graphic (vga.c:1714)
==5370== by 0x4687A5: vga_update_display (vga.c:1914)
==5370== by 0x2A782E: qxl_hw_update (qxl.c:1766)
==5370== by 0x3EB83B: graphic_hw_update (console.c:254)
==5370== by 0x3FBE31: qemu_spice_display_refresh (spice-display.c:418)
==5370== by 0x2A7D01: display_refresh (qxl.c:1886)
==5370== by 0x3EEE1C: dpy_refresh (console.c:1436)
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1383664554-15248-1-git-send-email-marcandre.lureau@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
On 32-bit hosts:
CC tests/test-opts-visitor.o
tests/test-opts-visitor.c: In function 'test_value':
tests/test-opts-visitor.c:128: warning: integer constant is too large for 'long' type
CC tests/test-bitops.o
tests/test-bitops.c:34: warning: integer constant is too large for 'long' type
tests/test-bitops.c:35: warning: integer constant is too large for 'long' type
tests/test-bitops.c:35: warning: integer constant is too large for 'long' type
CC tests/endianness-test.o
tests/endianness-test.c:47: warning: integer constant is too large for 'long' type
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1383669768-23926-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The documentation of how overlapping memory regions behave and how
the priority system works was rather brief, and confusion about
priorities seems to be quite common for developers trying to understand
how the memory region system works, so expand and clarify it.
This includes a worked example with overlaps, documentation of the
behaviour when an overlapped container has "holes", and mention
that it's valid for a region to have both MMIO callbacks and
subregions (and how this interacts with priorities when it does).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1381848154-31602-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
QOM device refactorings
* QTest coverage for all machines
* QOM realize for Milkymist UART
* QOM realize for ARM MPCore
* device_add bug fixes and cleanups
* QOM for PCMCIA/MicroDrive (last legacy IDE device)
# gpg: Signature made Tue 05 Nov 2013 09:07:03 AM PST using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (49) and others
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony: (54 commits)
pcmcia/pxa2xx: QOM'ify PXA2xxPCMCIAState
ide: Drop ide_init2_with_non_qdev_drives()
microdrive: Coding Style cleanups
pcmcia: QOM'ify PCMCIACardState and MicroDriveState
pxa: Fix typo "dettach"
qom: Fix pointer to int property helpers' documentation
qdev-monitor: Inline qdev_init() for device_add
qdev-monitor: Avoid qdev as variable name
qdev: Drop misleading qdev_free() function
qdev-monitor: Unref device when device_add fails
qdev-monitor: Fix crash when device_add is called with abstract driver
qdev-monitor: Clean up qdev_device_add() variable naming
arm11mpcore: Split off RealView MPCore
arm11mpcore: Prepare for QOM embedding
arm11mpcore: Convert mpcore_rirq_state to QOM realize
realview_gic: Prepare for QOM embedding
realview_gic: Convert to QOM realize
arm11mpcore: Convert ARM11MPCorePriveState to QOM realize
arm11mpcore: Split off SCU device
arm11mpcore: Create container MemoryRegion in instance_init
...
Turn it into a SysBusDevice and use a container MemoryRegion.
Add a link<pcmcia-card> property to the PCMCIACardState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Turn PCMCIACardState into a device.
Move callbacks to new PCMCIACardClass.
Derive TYPE_MICRODRIVE from TYPE_PCMCIA_CARD.
Replace ide_init2_with_non_qdev_drives().
Signed-off-by: Othmar Pasteka <pasteka@kabsi.at>
Signed-off-by: Andreas Färber <afaerber@suse.de>
For historic reasons, qdev_init() unparents the device on failure.
Inline this to make the error paths clearer and consistent.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for bringing error cleanup code into canonical QOM form.
Includes a whitespace removal after curly brace by Stefan.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The qdev_free() function name is misleading since all the function does
is unlink the device from its parent. The device is not necessarily
freed.
The device will be freed when its QObject refcount reaches zero. It is
usual for the parent (bus) to hold the final reference but there are
cases where something else holds a reference so "free" is a misleading
name.
Call object_unparent(obj) directly instead of having a qdev wrapper
function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
qdev_device_add() leaks the created device upon failure. I suspect this
problem crept in because qdev_free() unparents the device but does not
drop a reference - confusing name.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
User is able to crash running QEMU when following monitor
command is called:
device_add intel-hda-generic
Crash is caused by assertion in object_initialize_with_type()
when type is abstract.
Checking if type is abstract before instance is created in
qdev_device_add() allows to prevent crash on incorrect user input.
Cc: qemu-stable@nongnu.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Avoid confusion between object (obj) and object class (oc).
Tidy DeviceClass variable while at it (k -> dc).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move state struct, type constant and cast macro to a new header.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Embed ARM11MPCorePriveState and RealViewGICState and replace SysBus
initfn with realizefn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move state struct, type constant and cast macro to a new header.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Embed child devices and replace SysBus initfn with realizefn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This allows to map the region directly after object initialization.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rename NCPU to GIC_NCPU and move GICState away from gic_internal.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use of SysBusDevice::init is deprecated. Use Device::realize instead.
Also introduce TypeInfo::instance_init milkymist_uart_init().
Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instantiate all [*] machines per target, so that they get a bit of test
coverage at all. This has proven helpful during QOM refactorings.
[*] ppcemb target contains some non-working non-embedded machines, and
ppc405 CPUs are not available there either.
i386 and x86_64 do not cover pc*-x.y or xenfv.
Signed-off-by: Andreas Färber <afaerber@suse.de>
pci, pc, pvpanic bug fixes
This fixes strange pvpanic behaviour: you had to
pause to let VM continue (and potentially reboot on panic
if enabled).
This also fixes two bugs reported by Andreas.
One is a long-standing bug exposed by recent pci changes,
the other affects old piix machine types and was caused
by recent acpi changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
pci, pc, pvpanic bug fixes
This fixes strange pvpanic behaviour: you had to
pause to let VM continue (and potentially reboot on panic
if enabled).
This also fixes two bugs reported by Andreas.
One is a long-standing bug exposed by recent pci changes,
the other affects old piix machine types and was caused
by recent acpi changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 04 Nov 2013 05:42:46 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (2) and Paolo Bonzini (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
vl: allow "cont" from panicked state
exec: limit system memory size
pc: disable acpi info for isapc and old pc machine
Message-id: 1383572851-28326-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Only the first item of the array was ever looked at. No
practical effect, but still worth fixing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
After reporting the GUEST_PANICKED monitor event, QEMU stops the VM.
The reason for this is that events are edge-triggered, and can be lost if
management dies at the wrong time. Stopping a panicked VM lets management
know of a panic even if it has crashed; management can learn about the
panic when it restarts and queries running QEMU processes. The downside
is of course that the VM will be paused while management is not running,
but that is acceptable if it only happens with explicit "-device pvpanic".
Upon learning of a panic, management (if configured to do so) can pick a
variety of behaviors: leave the VM paused, reset it, destroy it. In
addition to all of these behaviors, it is possible to dump the VM core
from the host.
However, right now, the panicked state is irreversible, and can only be
exited by resetting the machine. This means that any policy decision
is entirely in the hands of the host. In particular there is no way to
use the "reboot on panic" option together with pvpanic.
This patch makes the panicked state reversible (and removes various
workarounds that were there because of the state being irreversible).
With this change, management has a wider set of possible policies: it
can just log the crash and leave policy to the guest, it can leave the
VM paused. In particular, the "log the crash and continue" is implemented
simply by sending a "cont" as soon as management learns about the panic.
Management could also implement the "irreversible paused state" itself.
And again, all such actions can be coupled with dumping the VM core.
Unfortunately we cannot change the behavior of 1.6.0. Thus, even if
it uses "-device pvpanic", management should check for "cont" failures.
If "cont" fails, management can then log that the VM remained paused
and urge the administrator to update QEMU.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The page table logic in exec.c assumes
that memory addresses are at most TARGET_PHYS_ADDR_SPACE_BITS.
But pci addresses are full 64 bit so if we try to render them ignoring
the extra bits, we get strange effects with sections overlapping each
other.
To fix, simply limit the system memory size to
1 << TARGET_PHYS_ADDR_SPACE_BITS,
pci addresses will be rendered within that.
Cc: qemu-stable@nongnu.org
Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable acpi build for isapc and no_kvmclock machine
types (used by xen), since acpi build currently expects pci.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
qxl creates a pipe, then writes something to it to wake up the iothread
from the spice server thread to raise an irq. These days qemu bottom
halves can be scheduled from threads and signals, so there is no reason
to do this any more. Time to clean it up.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unlike the existing FW_CFG_E820_TABLE entry which carries reservations
only the new etc/e820 file also has entries for RAM.
Format is simliar to the FW_CFG_E820_TABLE, it is a simple list of
e820_entry structs. Unlike FW_CFG_E820_TABLE it has no count though
as the number of entries can be figured from the file size.
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Block patches for 1.7.0-rc0 (v2)
# gpg: Signature made Thu 31 Oct 2013 04:44:39 PM CET using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
* kwolf/tags/for-anthony: (30 commits)
vmdk: Implment bdrv_get_specific_info
qapi: Add optional field 'compressed' to ImageInfo
qemu-iotests: prefill some data to test image
sheepdog: check simultaneous create in resend_aioreq
sheepdog: cancel aio requests if possible
sheepdog: make add_aio_request and send_aioreq void functions
sheepdog: try to reconnect to sheepdog after network error
coroutine: add co_aio_sleep_ns() to allow sleep in block drivers
sheepdog: reload inode outside of resend_aioreq
sheepdog: handle vdi objects in resend_aio_req
sheepdog: check return values of qemu_co_recv/send correctly
qemu-iotests: Test case for backing file deletion
qemu-iotests: drop duplicated "create_image"
qemu-iotests: Fix 051 reference output
block: Avoid unecessary drv->bdrv_getlength() calls
block: Disable BDRV_O_COPY_ON_READ for the backing file
ahci: fix win7 hang on boot
sheepdog: pass copy_policy in the request
sheepdog: explicitly set copies as type uint8_t
block: Don't copy backing file name on error
...
Message-id: 1383064269-27720-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
* agraf/ppc-for-upstream: (29 commits)
spapr: Use DeviceClass::fw_name for device tree CPU node
target-ppc: Fill in OpenFirmware names for some PowerPCCPU families
target-ppc: dump-guest-memory support
dump-guest-memory: Check for the correct return value
target-ppc: Use #define for max slb entries
target-ppc: Check for error on address translation in memsave command
target-ppc: Update slb array with correct index values.
spapr-pci: enable irqfd for INTx
xics-kvm: enable irqfd for MSI
xics: Implement H_XIRR_X
xics: Implement H_IPOLL
xics-kvm: Support for in-kernel XICS interrupt controller
xics: add cpu_setup callback
xics: split to xics and xics-common
xics: add missing const specifiers to TypeInfo
xics: convert init() to realize()
xics: add pre_save/post_load dispatchers
xics: replace fprintf with error_report
spapr: move cpu_setup after kvmppc_set_papr
xics: move reset and cpu_setup
...
Message-id: 1382736474-32128-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
* kraxel/usb.91:
usb-hcd-xhci: Update endpoint context dequeue pointer for streams too
usb-hcd-xhci: Report completion of active transfer with CC_STOPPED on ep stop
usb-hcd-xhci: Remove unused cancelled member from XHCITransfer
usb-hcd-xhci: Remove unused sstreamsm member from XHCIStreamContext
usb-host-libusb: Detach kernel drivers earlier
usb-host-libusb: Configuration 0 may be a valid configuration
usb-host-libusb: Fix reset handling
Message-id: 1382620267-18065-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Implement .bdrv_get_specific_info to return the extent information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel
as the value returned by unassigned_mem_read returned non-zero and left
the kernel looping forever waiting for it to change (see
integrator_led_set in the kernel code).
Relying on a varying implementation detail is incorrect anyway so this
introduces a basic stub of a memory region for the debug/LED section
on the integrator board.
Signed-off-by: Alex Bennée <alex@bennee.com>
Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org
[PMM: removed three unused fields from struct IntegratorDebugState]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The compare_u64 function was not sorting the KVM cpreg_list in the
right way due to the wrong returned value. Since we are comparing
two 64bit values we can't simply return their difference if the
returned type is int.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Message-id: 1381513125-26802-2-git-send-email-a.rigo@virtualopensystems.com
[PMM: fixed coding style, indent and commit message formatting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both KVM and TCG populate the cpreg_list with 64 bit register IDs,
but in the TCG side the cpreg_list is sorted using the 32 bit ID
version while in the kvm side the 64 bit ID version is used. This
patch makes the sorting of the cpreg_list consistent between KVM and
TCG.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Message-id: 1381513125-26802-1-git-send-email-a.rigo@virtualopensystems.com
[PMM: fixed indent, coding style and commit message formatting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Typically ARM boards will have some kind of flash which might contain
a boot ROM; it's therefore a valid use case to provide only an
image for the boot ROM and not require QEMU's internal boot loader
at all. Remove the fatal error if -kernel isn't specified.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1379980897-21277-2-git-send-email-peter.maydell@linaro.org
Case 030 occasionally fails because of block job compltes too fast to be
captured by script, and 'unexpected qmp event' of job completion causes
the test failure.
Simply fill in some data to the test image to make this false alarm less
likely to happen.
(For other benefits to prefill data to test image, see also commit
ab68cdfaa).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After reconnection happens, all the inflight requests are moved to the
failed request list. As a result, sd_co_rw_vector() can send another
create request before resend_aioreq() resends a create request from
the failed list.
This patch adds a helper function check_simultaneous_create() and
checks simultaneous create requests more strictly in resend_aioreq().
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch tries to cancel aio requests in pending queue and failed
queue. When the sheepdog driver cannot cancel the requests, it waits
for them to be completed.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This introduces a failed request queue and links all the inflight
requests to the list after network error happens. After QEMU
reconnects to the sheepdog server successfully, the sheepdog block
driver will retry all the requests in the failed queue.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test case for trying to open an image file where it is impossible
to open its backing file (in this case, because it was deleted). When
doing this, qemu (or qemu-io in this case) should not crash but rather
print an appropriate error message.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer generally keeps the size of an image cached in
bs->total_sectors so that it doesn't have to perform expensive
operations to get the size whenever it needs it.
This doesn't work however when using a backend that can change its size
without qemu being aware of it, i.e. passthrough of removable media like
CD-ROMs or floppy disks. For this reason, the caching is disabled when a
removable device is used.
It is obvious that checking whether the _guest_ device has removable
media isn't the right thing to do when we want to know whether the size
of the host backend can change. To make things worse, non-top-level
BlockDriverStates never have any device attached, which makes qemu
assume they are removable, so drv->bdrv_getlength() is always called on
the protocol layer. In the case of raw-posix, this causes unnecessary
lseek() system calls, which turned out to be rather expensive.
This patch completely changes the logic and disables bs->total_sectors
caching only for certain block driver types, for which a size change is
expected: host_cdrom and host_floppy on POSIX, host_device on win32; also
the raw format in case it sits on top of one of these protocols, but in
the common case the nested bdrv_getlength() call on the protocol driver
will use the cache again and avoid an expensive drv->bdrv_getlength()
call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 0ebd24e0a2,
bdrv_open_common will throw an error when trying to open a file
read-only with the BDRV_O_COPY_ON_READ flag set.
Although BDRV_O_RDWR is unset for the backing files,
BDRV_O_COPY_ON_READ is still passed on if copy-on-read was requested
for the drive. Let's unset this flag too before opening the backing
file, or bdrv_open_common will fail.
Signed-off-by: Thibaut LAURENT <thibaut.laurent@gmail.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When AHCI executes an asynchronous IDE command, it checked DRDY without
checking either DRQ or BSY. This sometimes caused interrupt to be sent
before command is actually completed.
This resulted in a race condition: if guest then managed to access the
device before command has completed, it would hang waiting for an
interrupt.
This was observed with windows 7 guests.
To fix, check for DRQ or BSY in additiona to DRDY, if set,
the command is asynchronous so delay the interrupt until
asynchronous done callback is invoked.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently copy_policy isn't used. Recent sheepdog supports erasure coding, which
make use of copy_policy internally, but require client explicitly passing
copy_policy from base inode to newly creately inode for snapshot related
operations.
If connected sheep daemon doesn't utilize copy_policy, passing it to sheep
daemon is just one extra null effect operation. So no compatibility problem.
With this patch, sheepdog can provide erasure coded volume for QEMU VM.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'copies' is actually uint8_t since day one, but request headers and some helper
functions parameterize it as uint32_t for unknown reasons and effectively
reserve 24 bytes for possible future use. This patch explicitly set the correct
for copies and reserve the left bytes.
This is a preparation patch that allow passing copy_policy in request header.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_open_backing_file() tries to copy the backing file name using
pstrcpy directly after calling bdrv_open() to open the backing file
without checking whether that was actually successful. If it was not,
ps->backing_hd->file will probably be NULL and qemu will crash.
Fix this by moving pstrcpy after checking whether bdrv_open() succeeded.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test case for Multiboot memory map in the tests/multiboot
directory, where future i386 test kernels can be dropped. Because this
requires an x86 build host and an installed 32 bit libgcc, the test is
not part of a regular 'make check'.
The reference output for the test is verified against test runs of the
same multiboot kernel booted by some GRUB 0.97.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a regression introduced by commit e3127ae0c, which kept the
allocation size of the bounce buffer limited to one page in order to
avoid unbounded allocations (as explained in the commit message of
6d16c2f88), but broke the reporting of the shortened bounce buffer to
the caller. The caller therefore assumes that the full requested size
was provided and causes memory corruption when writing beyond the end of
the actually allocated buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Opening the qcow2 image with BDRV_O_NO_FLUSH prevents any flushes during
the image creation. This means that the image has not yet been flushed
to disk when qemu-img create exits. This flush is delayed until the next
operation on the image involving opening it without BDRV_O_NO_FLUSH and
closing (or directly flushing) it. For large images and/or images with a
small cluster size and preallocated metadata, this flush may take a
significant amount of time and may occur unexpectedly.
Reopening the image without BDRV_O_NO_FLUSH right before the end of
qcow2_create2() results in hoisting the potentially costly flush into
the image creation, which is expected to take some time (whereas
successive image operations may be not).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix error: ‘inline’ is not at beginning of declaration
[-Werror=old-style-declaration]
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The QMP wire format uses "", not '', around strings.
* docs/qapi-code-gen.txt: Fix typo.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This file is moved out from QMP/ to BUILD dir, change the ignore file
too.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
compatiblity -> compatibility
continously -> continuously
existance -> existence
usefull -> useful
shoudl -> should
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In some cases when building with parallelism (make -jN),
build fails because the directory where output files are
supposed to be does not exist. In particular, when make
decides to build virtfs-proxy-helper.1 before other files
in fsdev/, build will fail with the following error:
perl -Ww -- BUILDDIR/scripts/texi2pod.pl BUILDDIR/fsdev/virtfs-proxy-helper.texi fsdev/virtfs-proxy-helper.pod && pod2man --utf8 --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > fsdev/virtfs-proxy-helper.1
opening "fsdev/virtfs-proxy-helper.pod": No such file or directory
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of relying on cpu_model, obtain the device tree node label
per CPU. Use DeviceClass::fw_name as source.
Whenever DeviceClass::fw_name is unknown, default to "PowerPC,UNKNOWN".
As a consequence, spapr_fixup_cpu_dt() can operate on each CPU's fw_name,
obsoleting sPAPREnvironment::cpu_model, and spapr_create_fdt_skel() can
drop its cpu_model argument.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Set the expected values for POWER7, POWER7+, POWER8 and POWER5+.
Note that POWER5+ and POWER7+ are intentionally lacking the '+', so the
lack of a POWER7P family constitutes no problem.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch add support for dumping guest memory using dump-guest-memory
monitor command.
Before patch:
(qemu) dump-guest-memory testcrash
this feature or command is not currently supported
(qemu)
After patch:
(qemu) dump-guest-memory testcrash
(qemu)
crash was able to read the file
crash> bt
PID: 0 TASK: c000000000c0d0d0 CPU: 0 COMMAND: "swapper/0"
R0: 0000000028000084 R1: c000000000cafa50 R2: c000000000cb05b0
R3: 0000000000000000 R4: c000000000bc4cb0 R5: 0000000000000000
R6: 001efe93b8000000 R7: 0000000000000000 R8: 0000000000000000
R9: b000000000001032 R10: 0000000000000001 R11: 0001eb2117e00d55
....
...
NOTE: Currently crash tools doesn't look at ELF notes in the dump on ppc64.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Instead of opencoding 64 use MAX_SLB_ENTRIES. We don't update the kernel
header here.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When we translate the virtual address to physical check for error.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Without this, a value of rb=0 and rs=0 results in replacing the 0th
index. This can be observed when using gdb remote debugging support.
(gdb) x/10i do_fork
0xc000000000085330 <do_fork>: Cannot access memory at address 0xc000000000085330
(gdb)
This is because when we do the slb sync via kvm_cpu_synchronize_state,
we overwrite the slb entry (0th entry) for 0xc000000000085330
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This enables IRQFD for LSI (level triggered INTx interrupts) by adding
a spapr_route_intx_pin_to_irq() callback to the sPAPR PCI host bus. This
callback is called to know the global interrupt number to link resampling fd
with IRQFD's fd in KVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This enables IRQFD support for sPAPR. The feature decreases the latency
of interrupt handling.
To enable IRQFD for MSI, this sets kvm_gsi_direct_mapping to true which
enables direct MSI mapping.
To enable IRQFD for LSI (level triggered INTx interrupts), a PCI host bus
callback is required. The patch for that is coming next.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This implements H_XIRR_X hypercall in addition to H_XIRR as
it is mandatory for PAPR+ and there is no way for the guest to
detect whether it is supported or not so just add it.
As the Partition Adjunct Option is not supported at the moment,
the CPPR parameter of the hypercall is ignored.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds support for the H_IPOLL hypercall which the guest
uses to poll for a pending interrupt. This hypercall is
mandatory for PAPR+ and there is no way for the guest to
detect whether it is supported or not so just add it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Recent (host) kernels support emulating the PAPR defined "XICS" interrupt
controller system within KVM. This patch allows qemu to initialize and
configure the in-kernel XICS, and keep its state in sync with qemu's XICS
state as necessary.
This should give considerable performance improvements. e.g. on a simple
IPI ping-pong test between hardware threads, using qemu XICS gives us
around 5,000 irqs/second, whereas the in-kernel XICS gives us around
70,000 irqs/s on the same hardware configuration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[Mike Qiu <qiudayu@linux.vnet.ibm.com>: fixed mistype which caused ics_set_kvm_state() to fail]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a cpu_setup callback to the XICS device class (as XICS-KVM
will do it different), xics_cpu_setup() will call it if it is set.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The upcoming XICS-KVM support will use bits of emulated XICS code.
So this introduces new level of hierarchy - "xics-common" class. Both
emulated XICS and XICS-KVM will inherit from it and override class
callbacks when required.
The new "xics-common" class implements:
1. replaces static "nr_irqs" and "nr_servers" properties with
the dynamic ones and adds callbacks to be executed when properties
are set.
2. xics_cpu_setup() callback renamed to xics_common_cpu_setup() as
it is a common part for both XICS'es
3. xics_reset() renamed to xics_common_reset() for the same reason.
The emulated XICS changes:
1. the part of xics_realize() which creates ICPs is moved to
the "nr_servers" property callback as realize() is too late to
create/initialize devices and instance_init() is too early to create
devices as the number of child devices comes via the "nr_servers"
property.
2. added ics_initfn() which does a little part of what xics_realize() did.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds missing const specifiers to ICS and ICP TypeInfo's.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This fixes XICS according new QOM rules.
This converts ICS's init() callbacks to realize().
This converts legacy qdev_init_nofail() to property_set(realized).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The upcoming support of in-kernel XICS will redefine migration callbacks
for both ICS and ICP so classes and callback pointers are added.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves the xics_cpu_setup() call after kvmppc_set_papr()
in order to get VCPUs initialized as this is required by upcoming
XICS-KVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Recent PowerKVM allows the kernel to intercept some RTAS calls from the
guest directly. This is used to implement the more efficient in-kernel
XICS for example. qemu is still responsible for assigning the RTAS token
numbers however, and needs to tell the kernel which RTAS function name is
assigned to a given token value. This patch adds a convenience wrapper for
the KVM_PPC_RTAS_DEFINE_TOKEN ioctl() which is used for this purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
On the real hardware, RTAS is called in real mode and therefore
top 4 bits of the address passed in the call are ignored.
So does the patch.
This converts h_rtas() to use existing rtas_ld() handlers.
This fixed rtas_ld()/rtas_st() to ignore top 4 bits.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR+ says that no "ibm,purr" tells the guest that H_PURR is not
supported. However some guests still try calling H_PURR on POWER7 unless
the property is present and equal to 0. This adds the property for CPUs
supporting the PURR special register.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment the size of the buffer is set to 64K which is
enough for approximately 150 VCPUs which is not the limit.
This increases the buffer up to 256K which allows having
a tree for approximately 600 VCPUs which is way beyond the real
number we need.
As only the real size of the tree is copied to the guest, there
will be no impact on existing configurations.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit 2345f1c01 was supposed to render L2CR writes into noops. Instead,
it made them illegal instruction traps which apparently didn't confuse
XNU, but can easily confuse other OSs.
Fix it up by actually doing nothing when we write to L2CR.
Reported-by: Julio Guerra <guerr@julio.in>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Julio Guerra <guerr@julio.in>
The Load Vector Element (lve*x) and Store Vector Element (stve*x)
instructions not only byte-swap in Little Endian mode, they also
invert the element that is accessed. For example, the RTL for
lvehx contains this:
eb <-- EA[60:63]
if Big-Endian byte ordering then
VRT[8*eb:8*eb+15] <-- MEM(EA,2)
else
VRT[112-(8*eb):127-(8*eb)] <-- MEM(EA,2)
This patch adds the element inversion, as described in the last line
of the RTL.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
The CFAR, DAR and DSISR registers are currently missing from the
dictionary of registers that may be printed in the QEMU console.
These are interesting registers when debugging. With this patch,
the following commands work properly:
(qemu) print $cfar
(qemu) print $dar
(qemu) print $dsisr
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Try loading the kernel as little endian if it fails big endian.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This has reworked USB OHCI and adds support of USB EHCI,
VIRTIO-SCSI and various fixes (IBM VSCSI, VGA and more).
The full list of fixes is:
* usb-ohci: Convert td-phys every time to td-virt
* usb-storage: Fix cbwflags field
* Add -fno-strict-aliasing in global CFLAGS
* usb: fix various issues found with js2x
* Move hex64-{decode,encode}-unit to node.fs
* usb: Use separate in-memory endian swap
* usb-ohci: collect TDs from done list
* js2x: more fixes
* js2x: Fix build of takeover image
* js2x: use new usb stack
* usb-ohci: Use proper memory barriers always
* usb: Fix a couple of warnings
* Fix $cat-instance-unit
* Cache phandle of /chosen
* Use root.fs on qemu as well
* usb-ehci: Add ehci handshake
* usb: add mb for write accessors
* usb-ohci: add missing memory barriers
* usb-ohci: suspend the controller in exit code path
* usb-ohci: Add a reset when closing the OHCI
* usb: Use proper accessors for MMIO and separate in-memory endian swap
* Use a global definition of sync() and mb()
* net-snk: Remove exception handling
* usb: unmap buffers
* slof: call quiesce on closing of stdin
* usb-kbd: accept "s" to drop to OF prompt
* USB storage driver
* usb-ohci: add Bulk transfer support
* usb-ehci: Add bulk support
* usb-core: add usb bulk support
* USB generic hub device driver
* usb-ehci: setup new device
* usb-ehci: Check ehci ports
* usb-ehci: initialize controller
* USB keyboard driver
* usb-core: setup new device
* usb-core: create dev pool allocation
* usb-ohci: implement ohci send control
* usb-core: usb send control
* usb-core: implement usb_{get,put}_pipe routines
* usb-ohci: allocate pipe pool
* usb-ohci: reset, init and check-ports
* Add standard header stdbool.h
* usb-slof: forth support routines for C
* usb-ehci: Add USB EHCI skeleton
* usb-core: Add register accessor functions
* Use __builtin_bswap routines for endianness swapping
* usb-core: hcd registration and query routines
* usb-core: adding generic dev-hci.fs
* usb-core: registration and makefiles
* Add new USB code
* Remove old usb code
* vga: fix hcall-invert-screen and hcall-blink-screen
* Enumerate disk/cdrom aliases for multiple disks or cdroms
* scsi: unify scsi probing code
* vscsi: generalizing probe code
* virtio-scsi: iterate through targets
* scsi: unify and use make-disk-alias
* nvram: remove unnecessary prints
* Add hack to client interface finddevice of "/memory"
* scsi: Fix cdrom boot crash when no medium present
* Look for /memory@0, not just /memory
* Fix instance>qname crashing when displaying instance arguments
* Fix js2x build
* scsi-disk: Bound check read-blocks
* Fix off by one error in scsi-disk get-capacity
* scsi: fix report-luns handling
* SLOF: virtio-scsi block driver code
* scsi: Move bits of vio-vscsi.fs to a common helpers file
* scsi: Move scsi-disk.fs to a generic place
* SLOF: virtio-scsi helper routines
* SLOF: virtio-scsi - add pci device file
* iso9660: Don't constantly reallocate the read buffer
* vscsi: Sanitize interface between scsi-disk.fs and vio-vscsi.fs
* vio-vscsi: Rework vio-vscsi support
* virtio: Add a virtio-set-qaddr helper
* disk-label: Allocate 4096 bytes for 4k block devices
* disk-label: Increase the max size of the PReP boot partition
* Make load-base a real environment variable
* vio-vscsi: Switch to using a wildcard "disk" node and make scsi-disk generic
* Fix disk-label package to use proper instance path
* Increase size of catpad
* Fix instance>path to contain unit address for wildcard nodes
* Fix handling of wildcard nodes in open-dev
* vio-vscsi: Get CRQ on open and release on close
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a test for saving a VM state from a qcow2 image and loading it back
(with having restarted qemu in between); this should work without any
problems.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This improves the reservation check for system emulation, making
it possible to catch stores that modify reserved word.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Microblaze carry is mirrored in MSR[31], pick it directly from
there. Also, no need to mask cpu_R[dc->ra] when calling
write_carry.
15% improvement in linux-user src loops.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
write_carry only looks at bit zero, no need to mask out the others.
Meassured a 12% speed improvement in linux-user srl loops.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
this adds a check that a dynamic VHD file has not been
accidently truncated (e.g. during transfer or upload).
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
currently it is not possible to distinguish by exitcode if there
has been an error or if bdrv_check is not supported by the image
format. Change the exitcode from 1 to 63 for the latter case.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Saving the VM state is done using bdrv_pwrite. This function may perform
a read-modify-write, which in this case results in data being read from
beyond the end of the virtual disk. Since we are actually trying to
access an area which is not a part of the virtual disk, zero_beyond_eof
has to be set to false before performing the partial write, otherwise
the VM state may become corrupted.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since df2a6f29a5, bdrv_co_do_writev increases the total_sectors value of
a growable block devices on writes after the current end. This leads to
the virtual disk apparently growing in qcow2_save_vmstate, which in turn
affects the disk size captured by the internal snapshot taken directly
afterwards through e.g. the HMP savevm command. Such a "grown" snapshot
cannot be loaded after reopening the qcow2 image, since its disk size
differs from the actual virtual disk size (writing a VM state does not
actually increase the virtual disk size).
Fix this by restoring total_sectors at the end of qcow2_save_vmstate.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we no longer have MIN_REARM_TIMER_NS a bug in the audio subsys has
clearly shown it self by trying to make a timer fire every nano second.
Note we have a similar problem in 1.6, 1.5 and older but there
MIN_REARM_TIMER_NS limits the wakeups caused by audio being active to
4000 times / second. This still causes a host cpu load of 50 % for simply
playing audio, where as with this patch git master is at 13%, so we should
backport this to 1.5 and 1.6 too.
Note this will not apply to 1.5 and 1.6 as is.
Cc: qemu-stable@nongnu.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With streams the endpoint context dequeue pointer should point to the
dequeue value for the currently active stream.
At least Linux guests expect it to point to value set by an set_ep_dequeue
upon completion of the set_ep_dequeue (before kicking the ep).
Otherwise the Linux kernel will complain (and things won't work):
xhci_hcd 0000:00:05.0: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
xhci_hcd 0000:00:05.0: ep deq seg = ffff8800366f0880, deq ptr = ffff8800366ec010
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As we should per the XHCI spec "4.6.9 Stop Endpoint".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since qemu's USB model is geared towards emulated devices cancellation
is instanteneous, so no need to wait for cancellation to complete, as
such there is no wait for cancellation code, and the cancelled bool
as well as the bogus comment about it can be removed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we detach the kernel drivers on the first set_config, then they will
be still attached when the device gets its initial reset. Causing the drivers
to re-initialize the device after the reset, dirtying the device state.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Quoting from: linux/Documentation/ABI/stable/sysfs-bus-usb:
Note that some devices, in violation of the USB spec, have a
configuration with a value equal to 0. Writing 0 to
bConfigurationValue for these devices will install that
configuration, rather then unconfigure the device.
So don't compare the configuration value against 0 to check for unconfigured
devices, instead check for a LIBUSB_ERROR_NOT_FOUND return from
libusb_get_active_config_descriptor().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The guest will issue an initial device reset when the device is attached, but
since the current usb-host-libusb code only actually does the reset when
udev->configuration != 0, and on attach the device is not yet configured,
the reset gets ignored. This means that the device gets passed to the guest
in an unknown state, which is not good.
The udev->configuration check is there because of the release / claim
interfaces done around the libusb_device_reset call, but these are not
necessary. If interfaces are claimed when libusb_device_reset gets called
libusb will release + reclaim them itself.
The usb_host_ep_update call also is not necessary. If the reset succeeds the
original config and interface alt settings will be restored.
Last if the reset fails, that means the device has either disconnected or
morphed into an another device and has been completely re-enumerated,
so it is treated by the host as a new device and our handle is invalid,
so on reset failure we need to call usb_host_nodev().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The QMP wire format uses "", not '', around strings.
* docs/qapi-code-gen.txt: Fix typo.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This lock does not protect anything that the BQL does not already
protect. Furthermore, with -nodefaults and no monitor, the mutex
is not initialized but monitor_protocol_event_queue is called
anyway, which causes a crash under mingw (and only works by luck.
under Linux or other POSIX OSes).
Reported-by: Orx Goshen <orx.goshen@intel.com>
Cc: Daniel Berrange <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Paolo Bonzini (2) and Jan Kiszka (1)
# Via Gleb Natapov
* qemu-kvm/uq/master:
kvmvapic: Prevent reading beyond the end of guest RAM
x86: cpuid: reconstruct leaf 0Dh data
x86: fix migration from pre-version 12
Message-id: 1382108641-4862-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Amos Kong
# Via Stefan Hajnoczi
* stefanha/net:
net/rtl8139: update network information when macaddr is changed in guest
net/e1000: update network information when macaddr is changed in guest
net: update nic info during device reset
Message-id: 1382103314-21608-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Fam Zheng (3) and others
# Via Stefan Hajnoczi
* stefanha/block:
vmdk: fix VMFS extent parsing
vmdk: Only read cid from image file when opening
virtio: Remove unneeded memcpy
block/raw-win32: Always use -errno in hdev_open
blockdev: fix cdrom read_only flag
sd: Avoid access to NULL BlockDriverState
hmp: drop bogus "[not inserted]"
Message-id: 1382105915-27735-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Paolo Bonzini (10) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
exec: remove qemu_safe_ram_ptr
icount: make it thread-safe
icount: document (future) locking rules for icount
icount: prepare the code for future races in calling qemu_clock_warp
icount: reorganize icount_warp_rt
icount: use cpu_get_icount() directly
timer: add timer_mod_anticipate and timer_mod_anticipate_ns
timer: extract timer_mod_ns_locked and timerlist_rearm
timer: make qemu_clock_enable sync between disable and timer's cb
qemu-thread: add QemuEvent
timer: protect timers_state's clock with seqlock
seqlock: introduce read-write seqlock
vga: Mark relevant portio lists regions as coalesced MMIO flushing
cirrus: Mark vga io region as coalesced MMIO flushing
portio: Allow to mark portio lists as coalesced MMIO flushing
compatfd: switch to QemuThread
memory: fix 128 arithmetic in info mtree
Message-id: 1382024935-28297-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Peter Maydell (3) and Ákos Kovács (2)
# Via Paolo Bonzini
* bonzini/configure:
ui/Makefile.objs: delete unnecessary cocoa.o dependency
default-configs/: CONFIG_GDBSTUB_XML removed
Makefile.target: CONFIG_NO_* variables removed
rules.mak: New string testing functions
rules.mak: New logical functions for handling y/n values
# By Gerd Hoffmann (2) and others
# Via Gerd Hoffmann
* spice/spice.v75:
spice: fix multihead support
spice-display: add display channel id to the debug messages.
Fix VNC SASL authentication when using a QXL device
spice: replace use of deprecated API
Message-id: 1382006760-19388-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
xtensa queue 2013-10-15
# gpg: Signature made Tue 15 Oct 2013 06:27:41 AM PDT using RSA key ID F83FA044
# gpg: Can't check signature: public key not found
# By Max Filippov
# Via Max Filippov
* filippov/tags/20131015-xtensa:
target-xtensa: add in_asm logging
Message-id: 1381844297-1728-1-git-send-email-jcmvbkbc@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The VMFS extent line in description file doesn't have start offset as
FLAT lines does, and it should be defaulted to 0. The flat_offset
variable is initialized to -1, so we need to set it in this case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Previously cid of parent is parsed from image file for every IO request.
We already have L1/L2 cache and don't have assumption that parent image
can be updated behind us, so remove this to get more efficiency.
The parent CID is checked only for once after opening.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
rtl8139 has same problem as e1000, nic info isn't updated when macaddr
is changed in guest.
This patch updates the nic info when the last bit of macaddr is written.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If we change macaddr in guest by 'ifconfig eth0 hw ether 12:12:12:34:35:36',
the mac register of e1000 is already updated, but we don't update
network information in qemu. Therefor, the information in monitor
is wrong.
This patch updates nic info when the second part of macaddr is written.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
macaddr is reset during device reset, but nic info
isn't updated, this problem exists in e1000 & rtl8139
Signed-off-by: Amos Kong <akong@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Report from valgrind:
==19521== Source and destination overlap in memcpy(0x31d38938, 0x31d38938, 64)
==19521== at 0x4A0A343: memcpy@@GLIBC_2.14 (in
/usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19521== by 0x42774E: virtio_blk_device_init (virtio-blk.c:686)
==19521== by 0x46EE9E: virtio_device_init (virtio.c:1158)
==19521== by 0x25405E: device_realize (qdev.c:178)
==19521== by 0x2559B5: device_set_realized (qdev.c:699)
==19521== by 0x3A819B: property_set_bool (object.c:1315)
==19521== by 0x3A6CE0: object_property_set (object.c:803)
Valgrind is right: blk == &s->blks, so it is a memcpy of 64 byte with
source == destination which can be removed.
Reported-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is not needed since the RAM list is not modified anymore by
qemu_get_ram_ptr. Replace it with qemu_get_ram_block.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Computing the deadline of all vm_clocks is somewhat expensive and calls
out to qemu-timer.c; two reasons not to do it in the seqlock's write-side
critical section. This however opens the door for races in setting and
reading vm_clock_warp_start.
To plug them, we need to cover the case where a new deadline slips in
between the call to qemu_clock_deadline_ns_all and the actual modification
of the icount_warp_timer. Restrict changes to vm_clock_warp_start and
the icount_warp_timer's expiration time, to only move them back (which
would simply cause an early wakeup).
If a vm_clock timer is cancelled while CPUs are idle, this might cause the
icount_warp_timer to fire unnecessarily. This is not a problem, after it
fires the timer becomes inactive and the next call to timer_mod_anticipate
will be precise.
In addition to this, we must deactivate the icount_warp_timer _before_
checking whether CPUs are idle. This way, if the "last" CPU becomes idle
during the call to timer_del we will still set up the icount_warp_timer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To prepare for future code changes, move the increment of qemu_icount_bias
outside the "if" statement.
Also, hoist outside the if the check for timers that expired due to the
"warping". The check is redundant when !runstate_is_running(), but
doing it this way helps because the code that increments qemu_icount_bias
will be a critical section.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will help later when we will have to place these calls in
a critical section, and thus call a version of cpu_get_icount()
that does not take the lock.
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These let a user anticipate the deadline of a timer, atomically with
other sites that call the function. This helps avoiding complicated
lock hierarchies.
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After disabling the QemuClock, we should make sure that no QemuTimers
are still in flight. To implement that with light overhead, we resort
to QemuEvent. The caller of disabling will wait on QemuEvent of each
timerlist.
Note, qemu_clock_enable(foo,false) can _not_ be called from timer's cb.
Also, the callers of qemu_clock_enable() should be protected by the BQL.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This emulates Win32 manual-reset events using futexes or conditional
variables. Typical ways to use them are with multi-producer,
single-consumer data structures, to test for a complex condition whose
elements come from different threads:
for (;;) {
qemu_event_reset(ev);
... test complex condition ...
if (condition is true) {
break;
}
qemu_event_wait(ev);
}
Or more efficiently (but with some duplication):
... evaluate condition ...
while (!condition) {
qemu_event_reset(ev);
... evaluate condition ...
if (!condition) {
qemu_event_wait(ev);
... evaluate condition ...
}
}
QemuEvent provides a very fast userspace path in the common case when
no other thread is waiting, or the event is not changing state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU_CLOCK_VIRTUAL may be read outside BQL. This will make its
foundation, i.e. cpu_clock_offset exposed to race condition.
Using private lock to protect it.
After this patch, reading QEMU_CLOCK_VIRTUAL is thread safe
unless use_icount is true, in which case the existing callers
still rely on the BQL.
Lock rule: private lock innermost, ie BQL->"this lock"
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Seqlock implementation for QEMU. Usage idiom
reader:
do {
start = seqlock_read_begin(&sl);
...
} while (seqlock_read_retry(&sl, start));
writer:
seqlock_write_lock(&sl);
...
seqlock_write_unlock(&sl);
initialization:
seqlock_init(QemuSeqLock *sl, QemuMutex *mutex)
mutex could be NULL if the caller will provide its own protection
for concurrent write sides (typically using the BQL).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows to remove the explicit qemu_flush_coalesced_mmio_buffer
calls.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows to remove the explicit qemu_flush_coalesced_mmio_buffer
calls - the memory core will invoke them now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will enable us to remove all remaining explicit calls of
qemu_flush_coalesced_mmio_buffer in IO handlers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_thread_create already does signal blocking and detaching for us.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mtree_print_mr() calls int128_get64() in 3 places but only 2 places
handle 2^64 correctly.
This fixes the third call of int128_get64().
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On one occasion, hdev_open() returned -1 in case of an unknown error
instead of a proper -errno value. Adjust this to match the behavior of
raw_open() (in raw-win32), which is to return -EINVAL in this case.
Also, change the call to error_setg*() to match the one in raw_open() as
well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have a fw_cfg entry to pass e820 entries from qemu to the firmware.
Today it's used to pass reservations only. This patch makes qemu pass
entries for RAM too.
This allows to pass RAM sizes larger than 1TB to the firmware and it
will also allow to pass non-contignous memory ramges should we decide
to implement that some day, say for our virtual numa nodes.
Obviously this needs some extra care to not break existing firware.
SeaBIOS loads the entries and happily adds them without looking at the
type. Which is problematic for memory below 4g as this will overwrite
reservations added for bios memory etc. For memory above 4g it works
just fine, seabios will merge the entry derived from cmos with the one
loaded from fw_cfg.
OVMF doesn't look at the fw_cfg e820 table.
coreboot doesn't look at the fw_cfg e820 table.
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
This patch fixes spice display initialization to handle
multihead properly.
spice-core now keeps track of which QemuConsole has a spice
display channel attached to it and which has not. It also
manages display channel ids.
spice-display looks at all QemuConsoles and will pick up any
graphic console not yet bound to a spice channel (which in practice
are all non-qxl graphic devices).
Result is that
(a) you'll get a spice client window for each graphical device
now (first only without this patch), and
(b) mixing qxl and non-qxl vga cards works properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ui/vnc.c:vnc_display_open() and spice-server/server/reds.c:do_spice_init()
are both calling sasl_server_init(). If spice_server_set_sasl_appname()
hasn't been called, spice-server will call it with "spice" as an appname,
causing cyrus-sasl to try to use a /etc/sasl2/spice.conf config file rather
than the /etc/sasl2/qemu.conf file that QEMU uses.
When using -spice sasl on the command line, QEMU properly calls
spice_server_set_sasl_appname() to set the SASL appname as "qemu",
but when using a QXL device without using SPICE, spice_server_init()
is called from qemu_spice_add_interface() without setting the appname
to "qemu", which then causes the VNC code to try to use spice.conf
instead of qemu.conf.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since 0ebd24e0, cdrom doesn't have read-only on by default, which will
error out when using an read only image. Fix it by setting the default
value when parsing opts.
Reported-by: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 4f8a066b5f (blockdev: Remove IF_*
check for read-only blockdev_init) added a usage of bdrv_is_read_only()
to sd_init(), which is called for versatilepb, versatileab and
xilinx-zynq-a9 machines among others with NULL argument by default,
causing the new qom-test to fail.
Add a check to prevent this.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 3e9fab690d ("block: Add support for
throttling burst max in QMP and the command line.") introduced bogus
"[not inserted]" output, possibly due to a merge failure. Remove this
artifact.
Output of 'info block'
scsi0-hd0: /images/f18-ppc64.qcow2 (qcow2)
[not inserted]
scsi0-cd2: [not inserted]
Removable device: not locked, tray closed
floppy0: [not inserted]
Removable device: not locked, tray closed
sd0: [not inserted]
Removable device: not locked, tray closed
There will be no additional lines between scsi0-hd0 and
scsi0-cd2.
At the same time, scsi0-hd0 already inserted, but still has
'[not inserted]' flag. This line should be removed.
This patch is to solve this.
Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Delete an unnecessary dependency for cocoa.o; we already have
a general rule that tells Make that we can build a .o file
from a .m source using an ObjC compiler, so this specific
rule is unnecessary. Further, it is using the dubious construct
"$(SRC_PATH)/$(obj)" to get at the source directory, which will
break when $(obj) is redefined as part of the preparation for
per-object library support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_NO_* variables replaced with the lnot logical function
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
[PMM: fixed a few CONFIG_NO_* uses that were missed]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new string testing functions which return a y/n result:
eq : are two strings equal (ignoring leading/trailing space)?
ne : are two strings unequal?
isempty : is a string empty?
notempty : is a string non-empty?
Based on an idea by Ákos Kovács <akoskovacs@gmx.com>.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new logical functions for handling y/n values like those we
use in CONFIG_FOO variables:
lnot : logical NOT
land : logical AND
lor : logical OR
lxor : logical XOR
leqv : logical equality, inverse of lxor
lif : like Make's $(if) but with an eq-like test
Based on an idea by Ákos Kovács <akoskovacs@gmx.com>.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-ldst-6:
target-alpha: Convert to new ldst opcodes
tcg-ppc64: Support new ldst opcodes
tcg-ppc: Support new ldst opcodes
tcg-ppc64: Convert to le/be ldst helpers
tcg-ppc: Convert to le/be ldst helpers
tcg-ppc64: Use TCGMemOp within qemu_ldst routines
tcg-ppc: Use TCGMemOp within qemu_ldst routines
tcg-arm: Improve GUEST_BASE qemu_ld/st
tcg-arm: Convert to new ldst opcodes
tcg-arm: Tidy variable naming convention in qemu_ld/st
tcg-arm: Convert to le/be ldst helpers
tcg-arm: Use TCGMemOp within qemu_ldst routines
tcg-i386: Support new ldst opcodes
tcg-i386: Remove "cb" output restriction from qemu_st8 for i386
tcg-i386: Tidy softmmu routines
tcg-i386: Use TCGMemOp within qemu_ldst routines
tcg: Use TCGMemOp for TCGLabelQemuLdst.opc
Message-id: 1381620683-4568-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Sebastian Macke
# Via Jia Liu
* jliu/or32:
target-openrisc: Removes a non-conforming behavior for the first page of the memory
target-openrisc: Correct handling of page faults.
Message-id: 1380789702-18935-1-git-send-email-proljc@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
vfio-pci updates include:
- Forgotten MSI affinity patch posted several months ago
- Lazy option ROM loading to delay load until after device/bus resets
- Error reporting cleanups
- PCI hot reset support introduced with Linux v3.12 development kernels
- Debug build fix for int128
The lazy ROM loading and hot reset should help VGA assignment as we can
now do a bus reset when there are multiple devices on the bus, ex.
multi-function graphics and audio cards.
# gpg: Signature made Thu 10 Oct 2013 11:26:39 AM PDT using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found
# By Alex Williamson (7) and Alexey Kardashevskiy (1)
# Via Alex Williamson
* awilliam/tags/vfio-pci-for-qemu-20131010.0:
vfio-pci: Fix endian issues in vfio_pci_size_rom()
vfio-pci: Add dummy PCI ROM write accessor
vfio: Fix debug output for int128 values
vfio-pci: Implement PCI hot reset
vfio-pci: Cleanup error_reports
vfio-pci: Lazy PCI option ROM loading
vfio-pci: Test device reset capabilities
vfio-pci: Add support for MSI affinity
Message-id: 20131010184122.31667.28382.stgit@bling.home
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
phys_mem_alloc and its assigned values qemu_anon_ram_alloc and
legacy_s390_alloc must have identical argument lists.
legacy_s390_alloc uses the size parameter to call mmap, so size_t is
good enough for all of them.
This patch fixes compiler errors on i686 Linux hosts:
CC alpha-softmmu/exec.o
exec.c:752:51: error:
initialization from incompatible pointer type [-Werror]
exec.c: In function 'qemu_ram_alloc_from_ptr':
exec.c:1139:32: error:
comparison of distinct pointer types lacks a cast [-Werror]
exec.c: In function 'qemu_ram_remap':
exec.c:1283:21: error:
comparison of distinct pointer types lacks a cast [-Werror]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1380481005-32399-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This adds C code for generating ACPI tables at runtime,
imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd
Although ACPI tables come from a system BIOS on real hw,
it makes sense that the ACPI tables are coupled with the
virtual machine, since they have to abstract the x86 machine to
the OS's.
This is widely desired as a way to avoid the churn
and proliferation of QEMU-specific interfaces
associated with ACPI tables in bios code.
Notes:
As BIOS can reprogram devices prior to loading
ACPI tables, we pre-format ACPI tables but defer loading
hardware configuration there until tables are loaded.
The code structure was intentionally kept as close
to the seabios original as possible, to simplify
comparison and making sure we didn't lose anything
in translation.
Minor code duplication results, to help ensure there are no functional
regressions, I think it's better to merge it like this and do more code
changes in follow-up patches.
Cross-version compatibility concerns have been addressed:
ACPI tables are exposed to guest as FW_CFG entries.
When running with -M 1.5 and older, this patch disables ACPI
table generation, and doesn't expose ACPI
tables to guest.
As table content is likely to change over time,
the following measures are taken to simplify
cross-version migration:
- All tables besides the RSDP are packed in a single FW CFG entry.
This entry size is currently 23K. We round it up to 64K
to avoid too much churn there.
- Tables are placed in special ROM blob (not mapped into guest memory)
which is automatically migrated together with the guest, same
as BIOS code.
- Offsets where hardware configuration is loaded in ACPI tables
are also migrated, this is in case future ACPI changes make us
rearrange the tables in memory.
This patch reuses some code from SeaBIOS, which was originally under
LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This
relicensing has been acked by all contributors that had contributed to the
code since the v2->v3 relicense. ACKs approving the v2+ relicensing are
listed below. The list might include ACKs from people not holding
copyright on any parts of the reused code, but it's better to err on the
side of caution and include them.
Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:
src/acpi-dsdt-cpu-hotplug.dsl
src/acpi-dsdt-dbug.dsl
src/acpi-dsdt-hpet.dsl
src/acpi-dsdt-isa.dsl
src/acpi-dsdt-pci-crs.dsl
src/acpi.c
src/acpi.h
src/ssdt-misc.dsl
src/ssdt-pcihp.dsl
src/ssdt-proc.dsl
tools/acpi_extract.py
tools/acpi_extract_preprocess.py
Each one of the listed people agreed to the following:
> If you allow the use of your contribution in QEMU under the
> terms of GPLv2 or later as proposed by this patch,
> please respond to this mail including the line:
>
> Acked-by: Name <email address>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Dave Frodin <dave.frodin@se-eng.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Magnus Christensson <magnus.christensson@intel.com>
Acked-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds APIs that will be used to fill in
acpi tables, implemented using QOM,
to various ich9 components.
Some information is still missing in QOM,
so we fall back on lookups by type instead.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds APIs that will be used to fill in guest acpi tables.
Some required information is still lacking in QOM, so we
fall back on lookups by type and returning explicit types.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds a dynamic bios linker/loader.
This will be used by acpi table generation
code to:
- load each table in the appropriate memory segment
- link tables to each other
- fix up checksums after said linking
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Detect presence of IASL compiler and use it
to process ASL source. If not there, use pre-compiled
files in-tree. Add script to update the in-tree files.
Note: distros are known to silently update iasl
so detect correct iasl flags for the installed version on each run as
opposed to at configure time.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds ASL code as well as scripts for processing it,
imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd
Will be used for runtime acpi table generation.
Note:
This patch reuses some code from SeaBIOS, which was originally under
LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This
relicensing has been acked by all contributors that had contributed to the
code since the v2->v3 relicense. ACKs approving the v2+ relicensing are
listed below. The list might include ACKs from people not holding
copyright on any parts of the reused code, but it's better to err on the
side of caution and include them.
Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:
src/acpi-dsdt-cpu-hotplug.dsl
src/acpi-dsdt-dbug.dsl
src/acpi-dsdt-hpet.dsl
src/acpi-dsdt-isa.dsl
src/acpi-dsdt-pci-crs.dsl
src/acpi.c
src/acpi.h
src/ssdt-misc.dsl
src/ssdt-pcihp.dsl
src/ssdt-proc.dsl
tools/acpi_extract.py
tools/acpi_extract_preprocess.py
Each one of the listed people agreed to the following:
> If you allow the use of your contribution in QEMU under the
> terms of GPLv2 or later as proposed by this patch,
> please respond to this mail including the line:
>
> Acked-by: Name <email address>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Dave Frodin <dave.frodin@se-eng.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Magnus Christensson <magnus.christensson@intel.com>
Acked-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support ROM blobs not mapped into guest memory:
same as ROM files really but use caller's buffer.
Support invoking callback on access and
return memory pointer making it easier
for caller to update memory if necessary.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
BAR base was calculated incorrectly.
Use existing pci_bar_address to get it right.
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qapi/error.h is simple enough to be included in qom/object.h
direcly and prepares qom/object.h to use Error typedef.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of exposing the the irq field,
pci wrappers to qemu_set_irq or qemu_irq_*
can be used.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The fields hpev_intx and aer_intx were removed because
both AER and hot-plug events must use device's interrupt.
Assert/deassert interrupts using pci irq wrappers instead.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.
An irq is allocated using pci_allocate_irq wrapper
only if is needed by non pci devices.
Removed irq related fields from state if not used anymore.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.
save INTX pin into the config register before calling
pci_set_irq
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_set_irq uses PCI_INTERRUPT_PIN config register
to compute device INTx pin to assert/deassert.
An assert is used to ensure that intx received
from the quest OS corresponds to PCI_INTERRUPT_PIN.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The PCI_INTERRUPT_PIN will be used by shpc init, so
was moved before the call to shpc_init.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Interrupt pin is selected and saved into PCI_INTERRUPT_PIN
register during device initialization. Devices should not call
directly qemu_set_irq and specify the INTx pin on each call.
Added pci_* wrappers to replace qemu_set_irq, qemu_irq_raise,
qemu_irq_lower and qemu_irq_pulse, setting the irq
based on PCI_INTERRUPT_PIN.
Added pci_allocate_irq wrapper to be used by devices that
still need PCIDevice infrastructure to assert irqs.
Renamed a static method which was named already pci_set_irq.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_allocate_irq returns a single qemu_irq.
The interface allows to specify an interrupt number.
qemu_free_irq frees it.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A MemoryRegion with negative priority was created and
it spans over all the pci address space.
It "intercepts" the accesses to unassigned pci
address space and will follow the pci spec:
1. returns -1 on read
2. does nothing on write
Note: setting the RECEIVED MASTER ABORT bit in the STATUS register
of the device that initiated the transaction will be
implemented in another series
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When memory regions overlap, priority can be used to specify
which of them takes priority. By making the priority values signed
rather than unsigned, we make it more convenient to implement
a situation where one "background" region should appear only
where no other region exists: rather than having to explicitly
specify a high priority for all the other regions, we can let them take
the default (zero) priority and specify a negative priority for the
background region.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When memory regions overlap, priority can be used to specify
which of them takes priority. By making the priority values signed
rather than unsigned, we make it more convenient to implement
a situation where one "background" region should appear only
where no other region exists: rather than having to explicitly
specify a high priority for all the other regions, we can let them take
the default (zero) priority and specify a negative priority for the
background region.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Or, partially. The fundamental primitives for the port are gen_load_mem
and gen_store_mem, which take a callback to emit the memory operation.
For that, we continue to use the original inline functions that forward
to the new ops, rather than replicate the same thing privately.
That said, all free-standing calls to tcg_gen_qemu_* have been converted.
The 32-bit floating-point references now use _i32 opcodes, eliminating
a truncate or extension.
Signed-off-by: Richard Henderson <rth@twiddle.net>
If we pull the code to emit the actual load/store into a subroutine,
we can share the reg+reg addressing mode code between softmmu and
usermode. This lets us load GUEST_BASE into a temporary register
rather than attempting to add it piece-wise to the address.
Which lets us use movw+movt for armv7, rather than (up to) 4 adds.
Code size for pre-armv7 stays the same.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Once we form a combined qemu_st_i32 opcode, we won't be able to
have separate constraints based on size. This one is fairly easy
to work around, since eax is available as a scratch register.
When storing variable data, this tends to merely exchange one mov
for another. E.g.
-: mov %esi,%ecx
...
-: mov %cl,(%edx)
+: mov %esi,%eax
+: mov %al,(%edx)
Where we do have a regression is when storing constant data, in which
we may load the constant into edi, when only ecx/ebx ought to be used.
The proper way to recover this regression is to allow constants as
arguments to qemu_st_i32, so that we never load the constant data into
a register at all, must less the wrong register. TBD.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Pass two TCGReg to tcg_out_tlb_load, rather than idx+args.
Move ldst_optimization routines just below tcg_out_tlb_load to avoid
the need for forward declarations.
Use TCGReg enum in preference to int where apprpriate.
Signed-off-by: Richard Henderson <rth@twiddle.net>
# By Mark Wu (2) and Tomoki Sekiyama (1)
# Via Michael Roth
* mdroth/qga-pull-2013-10-10:
qemu-ga: Extend 'guest-info' command to expose flag 'success-response'
qemu-ga: Add interface to traverse the qmp command list by QmpCommand
qemu-ga: execute fsfreeze-freeze in reverse order of mounts
Message-id: 1381435782-25524-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-pull:
exec: Add both big- and little-endian memory helpers
tcg: Add qemu_ld_st_i32/64
tcg: Add TCGMemOp
configure: Remove CONFIG_QEMU_LDST_OPTIMIZATION
tcg: Add tcg-be-ldst.h
tcg: Add tcg-be-null.h
exec: Delete is_tcg_gen_code and GETRA_EXT
tcg-aarch64: Update to helper_ret_*_mmu routines
tcg: Merge tcg_register_helper into tcg_context_init
tcg: Add tcg-runtime.c helpers to all_helpers
tcg: Put target helper data into an array.
tcg: Remove stray semi-colons from target-*/helper.h
tcg: Move helper registration into tcg_context_init
target-m68k: Rename helpers.h to helper.h
tcg: Use a GHashTable for tcg_find_helper
tcg: Delete tcg_helper_get_name declaration
tcg-hppa: Remove tcg backend
Message-id: 1381440525-6666-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Output is a long, unsorted list. Not very helpful. Print one list
per device category instead, with a header line identifying the
category, plus a list of uncategorized devices. Print each list in
case-insenitive alphabetical order.
Devices with multiple categories are listed multiple times.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1381410021-1538-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This reverts most of commit 3d1237fb2a.
The commit claims to sort the output of "-device help" "by
functionality rather than alphabetical". Issues:
* The output was unsorted before, not alphabetically sorted.
Misleading, but harmless enough.
* The commit doesn't just sort the output of "-device help" as it
claims, it adds categories to each line of "-device help", and it
prints devices once per category. In particular, devices without a
category aren't shown anymore. Maybe such devices should not exist,
but they do. Regression.
* Categories are also added to the output of "info qdm". Silent
change, not nice. Output remains unsorted, unlike "-device help".
I'm going to reimplement the feature we actually want, without the
warts. Reverting the flawed commit first should make it easier to
review. However, I can't revert it completely, since DeviceClass
member categories has been put to use. So leave that part in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1381410021-1538-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
qemu.org is held by a third-party and no core community contributor has
access to the DNS configuration. This leaves the website exposed to
outages due to DNS issues or IP address changes. For example, if the
web server IP address needs to change we cannot guarantee qemu.org will
point to it!
The newer qemu-project.org domain name is owned by Anthony Liguori
<anthony@codemonkey.ws>. You can confirm this by querying the whois
information. Also note that the #qemu IRC channel topic already
references qemu-project.org.
Short of having a dedicated legal entity to hold the domain name on
behalf of the community, qemu-project.org seems like the safest bet.
Let's replace references to qemu.org with qemu-project.org.
Note that git-submodule(1) does not detect URL changes. The following
commands clear out and re-initialize all submodules to ensure you are
using the latest URLs:
$ git submodule deinit . # you'll be warned if you have local changes
$ rm -rf .git/modules # also clear cached .git/ directories
$ git submodule update --init
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1381495958-8306-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Max Reitz (30) and others
# Via Kevin Wolf
* kwolf/for-anthony: (61 commits)
qemu-iotests: Add test for inactive L2 overlap
qemu-io: Let "open" pass options to block driver
vmdk: Fix vmdk_parse_extents
blockdev: blockdev_init() error conversion
blockdev: Don't disable COR automatically with blockdev-add
blockdev: Remove 'media' parameter from blockdev_init()
qemu-iotests: Check autodel behaviour for device_del
blockdev: Remove IF_* check for read-only blockdev_init
blockdev: Move virtio-blk device creation to drive_init
blockdev: Move bus/unit/index processing to drive_init
blockdev: Move parsing of 'boot' option to drive_init
blockdev: Moving parsing of geometry options to drive_init
blockdev: Move parsing of 'if' option to drive_init
blockdev: Move parsing of 'media' option to drive_init
blockdev: Pass QDict to blockdev_init()
blockdev: Separate ID generation from DriveInfo creation
blockdev: 'blockdev-add' QMP command
blockdev: Introduce DriveInfo.enable_auto_del
qapi-types/visit.py: Inheritance for structs
qapi-types/visit.py: Pass whole expr dict for structs
...
Message-id: 1381503951-27985-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Extend 060 by a test which creates a corrupted image with an active L2
entry pointing to an inactive L2 table and writes to the corresponding
guest offset.
Also, use overlap-check=all for all tests in 060.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an option to the open command to specify runtime options for the
block driver used.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An extra 'p++' after while loop when *p == '\n' will move p to unknown
data position, risking parsing junk data or memory access violation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This gives us meaningful error messages for the blockdev-add QMP
command.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a read-only device is configured with copy-on-read=on, the old code
only prints a warning and automatically disables copy on read. Make it
a real error for blockdev-add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The remaining users shouldn't be there with blockdev-add and are easy to
move to drive_init().
Bonus bug fix: As a side effect, CD-ROM drives can now use block drivers
on the read-only whitelist without explicitly specifying read-only=on,
even if a format is explicitly specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Block devices creates with -drive and drive_add should automatically
disappear if the guest device is unplugged. blockdev-add ones shouldn't.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
IF_NONE allows read-only, which makes forbidding it in this place
for other types pretty much pointless.
Instead, make sure that all devices for which the check would have
errored out check in their init function that they don't get a read-only
BlockDriverState. This catches even cases where IF_NONE and -device is
used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This requires moving the automatic ID generation at the same time, so
let's do that as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It's already ignored and only prints a deprecation message. No use in
making it available in new interfaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This moves all of the geometry options (cyls/heads/secs/trans) to
drive_init so that they can only be accessed using legacy functions, but
never with anything blockdev-add related.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This moves as much as possible of the processing of the 'media' option
to drive_init so that it can only be accessed using legacy functions,
but never with anything blockdev-add related.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Working on a QDict instead of a QemuOpts that accepts anything is more
in line with bdrv_open(). A QDict is what qmp_blockdev_add() already has
anyway, so this saves additional conversions. And last, but not least,
it allows later patches to easily extract legacy options into a
separate, typed QemuOpts for drive_init() (the untyped QemuOpts that
drive_init already has doesn't allow access to numbers, only strings,
and is therefore useless without conversion).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
BlockDriverStates shouldn't be affected by an unplugged guest device,
except if created with the legacy -drive command line option or the
drive_add HMP command.
Make the automatic deletion as well as cancelling of jobs conditional on
an enable_auto_del boolean that is only set in drive_init().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
This introduces a new 'base' key for struct definitions that refers to
another struct type. On the JSON level, the fields of the base type are
included directly into the same namespace as the fields of the defined
type, like with unions. On the C level, a pointer to a struct of the
base type is included.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Convert "fprintf(stderr,..." and standardize error messages:
Remove a few local_error's and use errp.
Remove "VMDK:" or "Vmdk:" prefixes in error message and fix to upper
case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This command will package the clean operations in tests. Now root Makefile
simply calls the command and do not care the details of it any more. Original
the built binaries for test will not be removed, now they will be deleted
in clean operation.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Usually we may configure and make, then goto ./tests/qemu-iotest,
check. In this case an error will happen since helper program
was not built. This patch simply build it by default. A better way
may be introducing Makefile in ./tests/qemu-iotest, but it is more
complicate to handle out of tree case, and a bit overkill
for a single file now, we can do that when more files come.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make use of the error parameter in the opening and creating functions in
block/raw-posix.c.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the blank line to above the test step banner, so it looks clearer
in blocks.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make use of the error parameter in the opening and creating functions in
block/raw-win32.c.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Propagate errors in raw_create rather than directly reporting and
afterwards discarding them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Evaluate the runtime overlap check options and set
BDRVQcowState.overlap_check appropriately.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduces the macros QCOW2_OL_CONSTANT and QCOW2_OL_ALL in addition to
the already existing QCOW2_OL_CACHED, signifying all metadata overlap
checks that can be performed in constant time (regardless of image size
etc.) and truly all available overlap checks, respectively.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an array which assigns the option string to its corresponding
overlap check bit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add runtime options to tune the overlap checks to be performed before
write accesses.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace the QCOW2_OL_DEFAULT macro by a variable overlap_check in
BDRVQcowState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_check_metadata_overlap and qcow2_pre_write_overlap_check,
change the parameter signifying the checks to perform from its current
positive form to a negative one, i.e., it will no longer explicitly
specify every check to perform but rather a mask of checks not to
perform.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The main intent of this patch is to consolidate the whitelist checks to
a single point in the code instead of spreading it everywhere. This adds
a nicer error message for read-only whitelisting, too, in places where
it was still missing.
The patch also contains a bonus bug fix: By finding the format first in
bdrv_open() and then independently checking against the whitelist only
later, we avoid the case that use of a non-whitelisted format results in
probing rather than an error message. Previously, this could happen when
using the driver=... option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
When trying to find a new snapshot ID, the existing ones are converted
to integers using strtoul. This function returns an unsigned long,
therefore its result should be saved in an unsigned long as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the new snapshot table could not be written in qcow2_snapshot_create,
the old snapshot table has to be restored in memory and the new one
released. This should include restoration of the old snapshot count as
well, which is added by this patch.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_write_compressed, if the compression fails, a normal cluster is
written to disk. This is done through bdrv_write on the qcow2 BDS
itself (using the guest offset), thus it is wrong to do a metadata
overlap check before.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The error message in qcow2_downgrade about an unsupported refcount
order is missing a space. This patch adds it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the VHDX format to the qemu-iotests format, and adds
a read test. The test reads from an existing sample image, that
was created with Hyper-V under Windwos Server 2012.
The image file is a 1GB dynamic image, with 32MB blocks.
The pattern 0xa5 exists from 0MB-33MB (past a block size boundary)
The pattern 0x96 exists from 33MB-66MB (past another block boundary,
and leaving a partial blank block)
From 66MB-1024MB, all reads should return 0.
Although 1GB dynamic image with 66MB of data, the bzip2'ed image
file size is only 874 bytes.
This also adds in the IMGFMT_GENERIC flag, so r/o images can be
tested (e.g. ./check -vhdx) without failing tests that assume
r/w support.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ATM we set AHCI mode on 1st GHC write.
Spec says we should set it on reset.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new test case for discarding preallocated zero clusters; doing
this should not result in any leaks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This field is used by blkverify to disable external snapshots creation.
It will also be used by block filters like quorum to disable external
snapshot creation.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
if a raw device like an iscsi target or host device is used
the current implementation makes a second call out to get
the block status of bs->file.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_write_snapshots relies on the length of every snapshot ID and name
fitting into an unsigned 16 bit integer. This is currently ensured by
QEMU through generally only allowing 128 byte IDs and 256 byte names.
However, if this should change in the future, the length written to the
image file should not be silently truncated (though the name itself
would be written completely).
Since this is currently not an issue but might require attention due to
internal QEMU changes in the future, an assert ensuring sanity is enough
for now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If an error occurs during qcow2_write_snapshots, the newly allocated
snapshot table clusters are leaked and should thus be freed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_write_snapshots does contain a fail label and there is no reason
not to use it on some errors; therefore, we should always jump there on
error.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_free_any_clusters, preallocated zero clusters should be freed
just as normal clusters are.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, qcow2_check_metadata_overlap uses bdrv_read to read inactive
L1 tables from disk. The number of sectors to read is calculated through
a truncating integer division, therefore, if the L1 table size is not a
multiple of the sector size, the final entries will not be read and
their entries in memory remain undefined (from the g_malloc).
Using bdrv_pread fixes this.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qcow2 specification does not explicitly state so far that every
snapshot table entry is aligned to 8 bytes. QEMU, in contrast, does this
alignment, thus it should be properly documented (which this patch
does).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for the additional information now provided by qemu-img info
when used on qcow2 images. It also tests the qemu QMP output from the
query-block command when running qemu with different runtime options
than specified in the image (ImageInfoSpecific should always refer to
the image).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In _img_info, filter out additional information specific to the image
format provided by qemu-img info, since tests designed for multiple
image formats would produce different outputs for every image format
otherwise.
In a human-readable dump, that new information will always be last for
each "image information block" (multiple blocks are emitted when
inspecting the backing file chain). Every block is separated by an empty
line. Therefore, in this case, everything starting with the line "Format
specific information:" up to that empty line (or EOF, if it is the last
block) has to be stripped.
The JSON dump will always emit pretty JSON data. Therefore, the opening
and closing braces of every object will be on lines which are indented
by exactly the same amount, and all lines in between will have more
indentation. Thus, in this case, everything starting with a line
matching the regular expression /^ *"format-specific": {/ until /^ *},?/
has to be stripped, where the number of spaces at the beginning of the
respective lines is equal.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new ImageInfoSpecificQCow2 type as a subtype of ImageInfoSpecific.
This contains the compatibility level as a string and an optional
lazy_refcounts boolean (optional means mandatory for compat >= 1.1 and
not available for compat == 0.10).
Also, add qcow2_get_specific_info, which returns this information.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function for generically dumping the ImageInfoSpecific information
in a human-readable format to block/qapi.c.
Use this function in bdrv_image_info_dump and qemu-io-cmds.c:info_f to
allow qemu-img info resp. qemu-io -c info to print that format specific
information.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function for retrieving an ImageInfoSpecific object from a block
driver.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new type ImageInfoSpecific as a union for image format specific
information in ImageInfo.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Switch the string to enum type BlockJobType in BlockJobDriver.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will replace the open coded block job type string for mirror,
commit and backup.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will use BlockJobType as the enum type name of block jobs in QAPI,
rename current BlockJobType to BlockJobDriver, which will eventually
become a set of operations, similar to block drivers.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Step three in the transition: helpers not tied to the target
"default" endianness. To be used when the guest uses a memory
operation with non-default endianness.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Step two in the transition, adding the new ldst opcodes. Keep the old
opcodes around until all backends support the new opcodes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
QOM CPUState refactorings / X86CPU
* Fix for X86CPU model field of qemu32/qemu64 CPU models
* Bug fix for longjmp on FreeBSD
* Removal of unused function
* Confinement of clone syscall infrastructure to linux-user
# gpg: Signature made Wed 09 Oct 2013 03:40:51 AM PDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (2) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
cpu: Drop cpu_model_str from CPU_COMMON
cpu: Move cpu_copy() into linux-user
cputlb: Remove dead function tlb_update_dirty()
cpu-exec: Also reload CPUClass *cc after longjmp return in cpu_exec()
target-i386: Set model=6 on qemu64 & qemu32 CPU models
# By Amit Shah
# Via Amit Shah
* amit/char-remove-watch-on-unplug:
char: remove watch callback on chardev detach from frontend
char: use common function to disable callbacks on chardev close
char: move backends' io watch tag to CharDriverState
Message-id: 20131004154802.GA25646@grmbl.mre
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Now we have several qemu-ga commands not returning response on success.
It has been documented in qga/qapi-schema.json already. This patch exposes
the 'success-response' flag by extending 'guest-info' command. With this
change, the clients can handle the command response more flexibly.
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*fixed up commit subject
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In the original code, qmp_get_command_list is used to construct
a list of all commands' name. To get the information of all qga
commands, it traverses the name list and search the command info
with its name. So it can cause O(n^2) in the number of commands.
This patch adds an interface to traverse the qmp command list by
QmpCommand to replace qmp_get_command_list. It can decrease the
complexity from O(n^2) to O(n).
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*fix up commit subject
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently, fsfreeze-freeze may cause deadlock if a guest has loopback mounts
of image files in its disk; e.g.:
# mount | grep ^/
/dev/vda1 / type ext4 (rw,noatime,seclabel,data=ordered)
/tmp/disk.img on /mnt type ext4 (rw,relatime,seclabel)
To avoid the deadlock, this freezes filesystems in reverse order of mounts.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*fix up commit msg
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This is a no-op backend data implementation, for those targets that
are not currently using the load/store optimization path.
This is prepatory to always requiring these functions in all backends.
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the few targets that actually use these, we'd not report
them symbolicly in the tcg opcode logs.
Signed-off-by: Richard Henderson <rth@twiddle.net>
One call inside of a loop to tcg_register_helper instead of hundreds
of sequential calls.
Presumably more icache and branch prediction friendly; resulting binary
size mostly unchanged on x86_64, as we're trading 32-bit rip-relative
references in .text for full 64-bit pointers in .rodata.
Signed-off-by: Richard Henderson <rth@twiddle.net>
During GEN_HELPER=1, these are actually stray top-level semi-colons
which are technically invalid ISO C, but GCC accepts as an extension.
If we added enough __extension__ markers that we could dare use
-Wpedantic, we'd see
warning: ISO C does not allow extra ‘;’ outside of a function
This will become a hard error in the next patch, wherein those ; will
appear in the middle of a data structure.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This brings the m68k target in line with all other targets.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Slightly changes the interface, in that we now return name
instead of a TCGHelperInfo structure, which goes away.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
# By Matthew Daley (1) and Roger Pau Monné (1)
# Via Stefano Stabellini
* sstabellini/xen-2013-10-10:
qemu/xen: make use of xenstore relative paths
xen_disk: mark ioreq as mapped before unmapping in error case
# By Asias He (1) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi: Allocate SCSITargetReq r->buf dynamically [CVE-2013-4344]
block/iscsi: reenable iscsi_co_get_block_status
Message-id: 1381332391-8781-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Qemu has several hardcoded xenstore paths that are only valid on Dom0.
Attempts to launch a Qemu instance (to act as a userspace backend for
PV disks) will fail because Qemu is not able to access those paths
when running on a domain different than Dom0.
Instead make the xenstore paths relative to the domain where Qemu is
actually running.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Cc: xen-devel@lists.xenproject.org
Cc: Anthony PERARD <anthony.perard@citrix.com>
Commit 4472beae modified the semantics of ioreq_{un,}map so that they are
idempotent if called when they're not needed (ie., twice in a row). However,
it neglected to handle the case where batch mapping is not being used (the
default), and one of the grants fails to map. In this case, ioreq_unmap will
be called to unwind and unmap any mappings already performed, but ioreq_unmap
simply returns due to the aforementioned change (the ioreq has not already
been marked as mapped).
The frontend user can therefore force xen_disk to leak grant mappings, a
per-domain limited resource.
Fix by marking the ioreq as mapped before calling ioreq_unmap in this
situation.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
r->buf is hardcoded to 2056 which is (256 + 1) * 8, allowing 256 luns at
most. If more than 256 luns are specified by user, we have buffer
overflow in scsi_target_emulate_report_luns.
To fix, we allocate the buffer dynamically.
Signed-off-by: Asias He <asias@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Max Reitz (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
block: use correct filename
qemu-iotests: Correct 026 output
qcow2: Free allocated L2 cluster on error
qcow2: Switch L1 table in a single sequence
block: vhdx - add migration blocker
block: use correct filename for error report
qcow2: CHECK_OFLAG_COPIED is obsolete
qcow2: Correct endianness in overlap check
Message-id: 1381145289-6591-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Stefan Weil (5) and others
# Via Michael Tokarev
* mjt/trivial-patches:
migration: Fix compiler warning ('caps' may be used uninitialized)
util/path: Fix type which is longer than 8 bit for MinGW
hw/9pfs: Fix errno value for xattr functions
vl: Clean up unnecessary boot_order complications
qemu-char: Fix potential out of bounds access to local arrays
pci-ohci: Add missing 'break' in ohci_service_td
sh4: Fix serial line access for Linux kernels later than 3.2
hw/alpha: Fix compiler warning (integer constant is too large)
target-i386: Fix compiler warning (integer constant is too large)
block: Remove unused assignment (fixes warning from clang)
exec: cleanup DEBUG_SUBPAGE
tests: Fix schema parser test for in-tree build
tests: Update .gitignore for test-int128 and test-bitops
.gitignore: ignore tests/qemu-iotests/socket_scm_helper
Message-id: 1381051979-25742-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-arm-pull:
tcg-arm: Move the tlb addend load earlier
tcg-arm: Remove restriction on qemu_ld output register
tcg-arm: Return register containing tlb addend
tcg-arm: Move load of tlb addend into tcg_out_tlb_read
tcg-arm: Use QEMU_BUILD_BUG_ON to verify constraints on tlb
tcg-arm: Use strd for tcg_out_arg_reg64
tcg-arm: Rearrange slow-path qemu_ld/st
tcg-arm: Use ldrd/strd for appropriate qemu_ld/st64
Message-id: 1380663109-14434-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Sebastian Ottlik
# Via Stefan Weil
* sweil/mingw:
util: call socket_set_fast_reuse instead of setting SO_REUSEADDR
slirp: call socket_set_fast_reuse instead of setting SO_REUSEADDR
net: call socket_set_fast_reuse instead of setting SO_REUSEADDR
gdbstub: call socket_set_fast_reuse instead of setting SO_REUSEADDR
util: add socket_set_fast_reuse function which will replace setting SO_REUSEADDR
Message-id: 1380735690-24009-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Stefan Weil
# Via Stefan Weil
* sweil/tci:
misc: Use new rotate functions
bitops: Add rotate functions (rol8, ror8, ...)
tci: Add implementation of rotl_i64, rotr_i64
Message-id: 1380137693-3729-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Commit f35c934a accidently disabled iscsi_co_get_block_status for all
libiscsi versions. Its not possible to check for enumeration constants
in the C preprocessor. This patch changes the check to the preprocessor
constant LIBISCSI_FEATURE_IOVECTOR which was introduced shortly after
get_lba_status support was added to libiscsi.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The content filename point to may be erased by qemu_opts_absorb_qdict()
in raw_open_common() in drv->bdrv_file_open()
So it's better to use bs->filename.
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Because l2_allocate now frees the unused L2 cluster on error, the
according test cases in 026 don't result in one leaked cluster anymore.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If an error occurs in l2_allocate, the allocated (but unused) L2 cluster
should be freed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since this is only read in cpu_copy() and linux-user has a global
cpu_model, drop the field from generic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It is only used there and is deemed very fragile if not incorrect in its
current memcpy() form. Moving it into linux-user will allow to move
parts into target_cpu.h headers and only copy what the ABI mandates.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Local variable CPUClass *cc needs to be reloaded after return from longjmp,
too. (This fixes a mips-softmmu crash observed on FreeBSD when QEMU is
built with clang.)
Reported-by: Dimitry Andric <dim@FreeBSD.org>
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
While dirent->d_type is 8 bit for most systems, it is 32 bit for MinGW.
Reducing it to 8 bit results in a compiler warning because the macro
is_dir_maybe compares that 8 bit value with 32 bit constants.
Using 'unsigned' instead of 'unsigned char' matches the declaration for
MinGW and does not harm the other systems.
MinGW-w64 is not affected: it does not declare d_type.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If there is no operation driver for the xattr type the
functions return '-1' and set errno to '-EOPNOTSUPP'.
When the calling code sets 'ret = -errno' this turns
into a large positive number.
In Linux 3.11, the kernel has switched to using 9p
version 9p2000.L, instead of 9p2000.u, which enables
support for xattr operations. This on its own is harmless,
but for another change which makes it request the xattr
with a name 'security.capability'.
The result is that the guest sees a succesful return
of 95 bytes of data, instead of a failure with errno
set to 95. Since the kernel expects a maximum of 20
bytes for an xattr return this gets translated to the
unexpected errno ERANGE.
This all means that when running a binary off a 9p fs
in 3.11 kernels you get a fun result of:
# ./date
sh: ./date: Numerical result out of range
The only workaround is to pass 'version=9p2000.u' when
mounting the 9p fs in the guest, to disable all use of
xattrs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Latest gcc-4.8 supports a new option -fsanitize=address which activates
an AddressSanitizer. This AddressSanitizer stops the QEMU system emulation
very early because two character arrays of size 8 are potentially written
with 9 bytes.
Commit 6ea314d914 added the code.
There is no obvious reason why width or height could need 8 characters,
so reduce it to 7 characters which together with the terminating '\0'
fit into the arrays.
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex@bennee.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
VFIO is always little endian so do byte swapping of our mask on the
way in and byte swapping of the size on the way out.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
rom_state_paddr is guest provided (caller address of outw(VAPIC_PORT) +
writen 16-bit value) and can be influenced to point beyond the end of
the host memory backing the guest's RAM. Make sure we do not use this
pointer to actually read beyond the limits.
Reading arbitrary guest bytes is harmless, the guest kernel has to
manage access to this I/O port anyway.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Memory regions can easily be 2^64 byte long and therefore overflow
for just a bit but that is enough for int128_get64() to assert.
This takes care of debug printing of huge section sizes.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Where *software* leaves 0x0000 - 0x2000 unmapped, the hardware should
still allow for this area to be mapped.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Reviewed-by: Jia Liu <proljc@gmail.com>
The result of (rw & 0) is always zero and therefore a logic false.
The whole comparison will therefore never be executed, it is a obvious bug,
we should use !(rw & 1) here.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Now that VFIO has a PCI hot reset interface, take advantage of it.
There are two modes that we need to consider. The first is when only
one device within the set of devices affected is actually assigned to
the guest. In this case the other devices are are just held by VFIO
for isolation and we can pretend they're not there, doing an entire
bus reset whenever the device reset callback is triggered. Supporting
this case separately allows us to do the best reset we can do of the
device even if the device is hotplugged.
The second mode is when multiple affected devices are all exposed to
the guest. In this case we can only do a hot reset when the entire
system is being reset. However, this also allows us to track which
individual devices are affected by a reset and only do them once.
We split our reset function into pre- and post-reset helper functions
prioritize the types of device resets available to us, and create
separate _one vs _multi reset interfaces to handle the distinct cases
above.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Device communication errors need to be reported to driver.
Add a debug message while at it.
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With Linux kernel version 3.3 or later, qemu fails with the following message:
sh_serial: unsupported read from 0x18
Aborted
Reported-and-analyzed-by: Rob Landley <rob@landley.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
From buildbot default_i386_rhel61:
CC alpha-softmmu/hw/alpha/typhoon.o
hw/alpha/typhoon.c: In function 'typhoon_translate_iommu':
hw/alpha/typhoon.c:703: warning: integer constant is too large for 'long' type
hw/alpha/typhoon.c:703: warning: integer constant is too large for 'long' type
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
From buildbot default_i386_rhel61:
CC i386-softmmu/target-i386/arch_memory_mapping.o
target-i386/arch_memory_mapping.c: In function 'walk_pde':
target-i386/arch_memory_mapping.c:110: warning:
integer constant is too large for 'long' type
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
blockdev.c:1929:13: warning: Value stored to 'ret' is never read
ret = 0;
^ ~
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
During vfio-pci initfn, the device is not always in a state where the
option ROM can be read. In the case of graphics cards, there's often
no per function reset, which means we have host driver state affecting
whether the option ROM is usable. Ideally we want to move reading the
option ROM past any co-assigned device resets to the point where the
guest first tries to read the ROM itself.
To accomplish this, we switch the memory region for the option rom to
an I/O region rather than a memory mapped region. This has the side
benefit that we don't waste KVM memory slots for a BAR where we don't
care about performance. This also allows us to delay loading the ROM
from the device until the first read by the guest. We then use the
PCI config space size of the ROM BAR when setting up the BAR through
QEMU PCI.
Another benefit of this approach is that previously when a user set
the ROM to a file using the romfile= option, we still probed VFIO for
the parameters of the ROM, which can result in dmesg errors about an
invalid ROM. We now only probe VFIO to get the ROM contents if the
guest actually tries to read the ROM.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Not all resets are created equal. PM reset is not very reliable,
especially for GPUs, so we might want to opt for a bus reset if a
standard reset will only do a D3hot->D0 transition. We can also
use this to tell if the standard reset will do a bus reset (if
neither has_pm_reset or has_flr is probed, but the device still
supports reset).
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When MSI is accelerated through KVM the vectors are only programmed
when the guest first enables MSI support. Subsequent writes to the
vector address or data fields are ignored. Unfortunately that means
we're ignore updates done to adjust SMP affinity of the vectors.
MSI SMP affinity already works in non-KVM mode because the address
and data fields are read from their backing store on each interrupt.
This patch stores the MSIMessage programmed into KVM so that we can
determine when changes are made and update the routes.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
An exception to this rule are multicast sockets where it is sensible to have
multiple sockets listen on the same ip and port and we should set SO_REUSEADDR
on windows.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
If a socket is closed it remains in TIME_WAIT state for some time. On operating
systems using BSD sockets the endpoint of the socket may not be reused while in
this state unless SO_REUSEADDR was set on the socket. On windows on the other
hand the default behaviour is to allow reuse (i.e. identical to SO_REUSEADDR on
other operating systems) and setting SO_REUSEADDR on a socket allows it to be
bound to a endpoint even if the endpoint is already used by another socket
independently of the other sockets state. This can even result in undefined
behaviour.
Many sockets used by QEMU should not block the use of their endpoint after being
closed while they are still in TIME_WAIT state. Currently QEMU sets SO_REUSEADDR
for such sockets, which can lead to problems on Windows. This patch introduces
the function socket_set_fast_reuse that should be used instead of setting
SO_REUSEADDR when fast socket reuse is desired and behaves correctly on all
operating systems.
As a failure of this function can only be caused by bad QEMU internal errors, an
assertion handles these situations. The return value is still passed on, to
minimize changes in client code and prevent unused variable warnings if NDEBUG
is defined.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The data in leaf 0Dh depends on information from other feature bits.
Instead of passing it blindly from the host, compute it based on
whether these feature bits are enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
On KVM, the KVM_SET_XSAVE would be executed with a 0 xstate_bv,
and not restore anything.
Since FP and SSE data are always valid, set them in xstate_bv at reset
time. In fact, that value is the same that KVM_GET_XSAVE returns on
pre-XSAVE hosts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
There's no Intel CPU with family=6,model=2, and Linux and Windows guests
disable SEP when seeing that combination due to Pentium Pro erratum #82.
In addition to just having SEP ignored by guests, Skype (and maybe other
applications) runs sysenter directly without passing through ntdll on
Windows, and crashes because Windows ignored the SEP CPUID bit.
So, having model > 2 is a better default on qemu64 and qemu32 for two
reasons: making SEP really available for guests, and avoiding crashing
applications that work on bare metal.
model=3 would fix the problem, but it causes CPU enumeration problems
for Windows guests[1]. So let's set model=6, that matches "Athlon
(PM core)" on AMD and "P2 with on-die L2 cache" on Intel and it allows
Windows to use all CPUs as well as fixing sysenter.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=508623
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Switching the L1 table in memory should be an atomic operation, as far
as possible. Calling qcow2_free_clusters on the old L1 table on disk is
not a good idea when the old L1 table is no longer valid and the address
to the new one hasn't yet been written into the corresponding
BDRVQcowState field. To be more specific, this can lead to segfaults due
to qcow2_check_metadata_overlap trying to access the L1 table during the
free operation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This blocks migration for VHDX image files, until the
functionality can be supported.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The content filename point to will be erased by qemu_opts_absorb_qdict()
in raw_open_common() in drv->bdrv_file_open()
So it's better to use bs->filename.
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
CHECK_OFLAG_COPIED as a parameter to check_refcounts_l1 and
check_refcounts_l2 is obselete now, since the OFLAG_COPIED consistency
check is actually no longer performed by these functions (but by
check_oflag_copied).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If an inactive L1 table is loaded from disk, its entries are in big
endian and have to be converted to host byte order before using them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are free scheduling slots between the sequence of
comparison instructions. This requires changing the
register in use to avoid conflict with those compares.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The main intent of the patch is to allow the tlb addend register
to be changed, without tying that change to the constraint. But
the most common side-effect seems to be to enable usage of ldrd
with the r0,r1 pair.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This allows us to make more intelligent decisions about the relative
offsets of the tlb comparator and the addend, avoiding any need of
writeback addressing.
Signed-off-by: Richard Henderson <rth@twiddle.net>
One of the two constraints we already checked via #if, but
the tlb offset distance was only checked at runtime.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use the new helper_ret_*_mmu routines. Use a conditional call
to arrange for a tail-call from the store path, and to load the
return address for the helper for the load path.
Signed-off-by: Richard Henderson <rth@twiddle.net>
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 29 Sep 2013 01:51:16 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (8) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
smbios: Factor out smbios_maybe_add_str()
smbios: Make multiple -smbios type= accumulate sanely
smbios: Improve diagnostics for conflicting entries
smbios: Convert to QemuOpts
smbios: Normalize smbios_entry_add()'s error handling to exit(1)
virtio-net: fix up HMP NIC info string on reset
pci: remove explicit check to 64K ioport size
piix4: disable io on reset
piix: use 64 bit window programmed by guest
q35: use 64 bit window programmed by guest
pci: add helper to retrieve the 64-bit range
range: add min/max operations on ranges
range: add Range to typedefs
q35: make pci window address/size match guest cfg
Message-id: 1380437951-21788-1-git-send-email-mst@redhat.com
# By Max Reitz (10) and others
# Via Kevin Wolf
* kwolf/for-anthony: (30 commits)
qcow2: Remove useless count_contiguous_clusters() parameter
qcow2: COMPRESSED on count_contiguous_clusters
qcow2: count_contiguous_clusters and compression
qcow2: Free only newly allocated clusters on error
qcow2: Always use error path in l2_allocate
qcow2: Don't put invalid L2 table into cache
qemu-iotests: Preallocated zero clusters in 061
qcow2: Correct bitmap size in zero expansion
qemu-iotests: Quote $TEST_IMG* and $TEST_DIR usage
qemu-iotests: Add basic ability to use binary sample images
qemu-iotests: fix qmp.py search path
block: use DIV_ROUND_UP in bdrv_co_do_readv
qcow2: Assert against currently impossible overflow
block: qed - use QEMU_PACKED for on-disk structures
block: qcow2 - used QEMU_PACKED for on-disk structures
block: vpc - use QEMU_PACKED for on-disk structures
block: vdi - use QEMU_PACKED for on-disk structures
rbd: avoid qemu_rbd_snap_list() memory leaks
qdict: Extract qdict_extract_subqdict
block: Fix compiler warning (-Werror=uninitialized)
...
Message-id: 1380296370-14523-1-git-send-email-kwolf@redhat.com
# By Richard Henderson (19) and Paolo Bonzini (2)
# Via Richard Henderson
* rth/tcg-ppc-pull: (21 commits)
tcg-ppc64: Implement CONFIG_QEMU_LDST_OPTIMIZATION
tcg-ppc64: Add _noaddr functions for emitting forward branches
tcg-ppc64: Streamline tcg_out_tlb_read
tcg-ppc64: Implement tcg_register_jit
tcg-ppc64: Handle long offsets better
tcg-ppc64: Tidy register allocation order
tcg-ppc64: Look through a constant function descriptor
tcg-ppc64: Fold constant call address into descriptor load
tcg-ppc64: Don't load the static chain from TCG
tcg-ppc64: Avoid code for nop move
tcg-ppc64: Use tcg_out64
tcg-ppc64: Use TCG_REG_Rn constants
tcg-ppc64: More use of TAI and SAI helper macros
tcg-ppc64: Reformat tcg-target.c
tcg-ppc: Fix and cleanup tcg_out_tlb_check
tcg-ppc: Use conditional branch and link to slow path
tcg-ppc: Cleanup tcg_out_qemu_ld/st_slow_path
tcg-ppc: Avoid code for nop move
tcg-ppc: use new return-argument ld/st helpers
tcg-ppc: fix qemu_ld/qemu_st for AIX ABI
...
Message-id: 1380126458-3247-1-git-send-email-rth@twiddle.net
# By Isaku Yamahata (4) and others
# Via Juan Quintela
* quintela/migration.next:
migration: ram_handle_compressed
arch_init: make is_zero_page accept size
migration: Fix debug print type
migration: add version supporting macros for struct pointer
rdma: constify ram_chunk_{index, start, end}
rdma: clean up of qemu_rdma_cleanup()
arch_init: right return for ram_save_iterate
savevm: fix wrong initialization by ram_control_load_hook
savevm: add comments for qemu_file_get_error()
Message-id: 1380024203-25897-1-git-send-email-quintela@redhat.com
# By Bandan Das (3) and Gerd Hoffmann (1)
# Via Gerd Hoffmann
* kraxel/audio.1:
audio: remove CONFIG_MIXEMU configure option
hda-codec: make mixemu selectable at runtime
hda-codec: refactor common definitions into a header file
audio maintainers update
Message-id: 1380011943-15083-1-git-send-email-kraxel@redhat.com
This is a bunch of fixes/changes for the s390 architecture. It also
contains the fixes from the previous pull request, which did not make
it yet.
Overall it contains
- a fix for kexec without kdump (which uses diag308 subcode 0 instead of 1)
- several sclp related fixes
- some initial sclp migration code
- the sclp line mode console
- A fix for a boot problem with the virtio ccw ipl bios
- zeroed out padding bytes for the notes section of dump-guest-memory
- some cleanups
# gpg: Signature made Tue 24 Sep 2013 02:18:44 AM CDT using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found
# By Christian Borntraeger (6) and others
# Via Christian Borntraeger
* borntraeger/tags/s390-next-20130924:
s390/sclplmconsole: Add support for SCLP line-mode console
s390/ebcdic: Move conversion tables to header file
s390/eventfacility: allow childs to handle more than 1 event type
s390/eventfacility: remove unused event_type variable
s390/eventfacility: Fix receive/send masks
s390/eventfacility: fix multiple Read Event Data sources
s390/sclp: add reset() functions
s390/sclpquiesce: Add code to support live migration
s390/sclpconsole: Add code to support live migration for sclpconsole
s390/sclpconsole: modify definition of input buffer
s390/kexec: Implement diag308 subcode 0
s390/ioinst: Moved the CC setting to the IO instruction handlers
s390/cpu: Make setcc() function available to other files
s390/ipl: Update the s390-ccw.img rom
s390/ipl: Fix waiting for virtio processing
s390/dump: zero out padding bytes in notes sections
s390/kvm: Add check for priviledged SCLP handler
Message-id: 1380007671-18976-1-git-send-email-borntraeger@de.ibm.com
'git shortlog d4f7d90f..ece025f5' says:
Alex Williamson (4):
seabios q35: Enable all PIRQn IRQs at startup
seabios q35: Add new PCI slot to irq routing function
seabios: Add a dummy PCI slot to irq mapping function
pciinit: Enable default VGA device
Asias He (2):
virtio-scsi: Set _DRIVER_OK flag before scsi target scanning
virtio-scsi: Pack struct virtio_scsi_{req_cmd,resp_cmd}
Avik Sil (1):
USB-EHCI: Fix null pointer assignment
Christian Gmeiner (5):
geodevga: fix errors in geode_fp_* functions
geodevga: move framebuffer setup
geodevga: move output setup to own function
geodevga: add debug to msr functions
geodevga: fix wrong define name
David Woodhouse (26):
Add macros for pushing and popping struct bregs
Clean up #if in pirtable.c. CONFIG_PIRTABLE can't be set if CONFIG_COREBOOT is
post: Export functions which will be used individually by CSM
Export callrom() for CSM to use
Export copy_smbios() from biostables.c
Import LegacyBios.h from OVMF
Complete and checksum EFI_COMPATIBILITY16_TABLE at build time
Add pic_save_mask() and pic_restore_mask() functions
Add CSM support
Add README.CSM
Add find_pmtimer() function
Enable PMTIMER for CSM build
Fix rom_reserve()/rom_confirm() for CSM oprom dispatch
Don't calibrate TSC if PMTIMER is already set up
Move find_pmtimer() to ACPI table setup where it logically belongs
Use find_pmtimer() after copying Xen ACPI tables
Use find_pmtimer() after copying coreboot ACPI tables
Unify return path for CSM to go via csm_return()
Make CONFIG_OPTIONROMS_DEPLOYED depend on CONFIG_QEMU
Implement !CONFIG_OPTIONROMS support for CSM
Implement !CONFIG_BOOT for CSM
Enable VGA output when settings bochs-specific mode
Disable CONFIG_THREAD_OPTIONROMS for CSM build
Fix return type of le64_to_cpu() and be64_to_cpu()
Rename find_pmtimer() to find_acpi_features()
Add acpi_reboot() reset method using RESET_REG
Gerd Hoffmann (6):
config: allow DEBUG_IO for !QEMU
coreboot: add qemu detection
tweak coreboot qemu detection
apm: fix shutdown
ahci: add missing check for allocation failure
fix buildversion.sh
Hu Tao (1):
Add pvpanic device driver
Kevin O'Connor (101):
pmm: Use 'struct segoff_s' in pmm header.
Minor: Update README - variable changes are now reset on soft-reboots.
Normalize POST initialization function name suffixes.
POST: Reorganize post init functions for better grouping and reusability.
Fix rebase error in commit 8a0a972f that broke LOWMEM variables.
Support calling a function other than maininit() from reloc_preinit().
Ensure exported symbols are visible in the final link
POST: Move QEMU specific ramsize and BIOS table setup to paravirt.c.
POST: Reorganize post entry and "preinit" functions.
POST: Move cpu caching and dma setup to platform_hardware_setup().
Undo incorrect assumptions about Xen in commit 6ca0460f.
Determine century during init and store in VARLOW mem during runtime.
No need to check both CONFIG_THREADS and CONFIG_THREAD_OPTIONROMS.
Add runningOnQEMU() and runningOnXen() for runtime platform detection.
Consistently use CONFIG_COREBOOT, CONFIG_QEMU, and runningOnXen().
Convert kvm_para_available() to runningOnKVM().
Minor - move definitions to paravirt.c from paravirt.h.
Only perform SMP setup on QEMU.
Start device_hardware_setup in mainint even with CONFIG_THREAD_OPTIONROMS.
The mathcp setup touches the PIC and thus move to the "setup" phase.
Update tools/acpi_extract.py to handle iasl 20130117 release.
Support skipping content when reading from QEMU fw_cfg romfile entries.
Convert fw_cfg ACPI entries into romfile entries.
Convert fw_cfg SMBIOS entries into romfile entries.
Convert basic integer fw_cfg entries into romfile entries.
Convert fw_cfg NUMA entries into a romfile entry.
Process fw_cfg e820 entries during the fw_cfg setup stage.
Integrate qemu_cfg_preinit() into qemu_romfile_init().
Group QEMU platform setup together and move to paravirt.c.
vgabios: Bochs/QEMU vgabios support should depend on CONFIG_QEMU.
Warn on unaligned PCI ROM structure in option roms.
Fix Makefile - don't reference "out/" directly, instead use "$(OUT)".
build: Don't require $(OUT) to be a sub-directory of the main directory.
Rename rom_get_top() to rom_get_max().
Report on f-segment UMB ram also.
Clarify build generated "zone low" values.
Verify CC is valid during build tests.
Disable handle_post() on CSM builds.
Remove unnecessary "export" declarations from assembler functions.
Minor assembler enhancements to __csm_return.
Introduce VARFSEG for variables that will reside in the f-segment.
Convert VAR16VISIBLE, VAR16EXPORT, and VAR32VISIBLE to VARFSEG.
Don't relocate "varlow" variable references at runtime.
Move malloc's ZoneFSeg and ZoneLow setup to malloc_init.
Calculate "RamSize" needed by 16bit interface dynamically.
Eliminate separate BiosTableSpace[] space for f-segment allocations.
Use CONFIG_ prefix for Kconfig variables; use BUILD_ for others.
Try to detect an unsuccessful hard-reboot to prevent soft-reboot loops.
Minor - fix confusing final_sec32low_start name in layoutrom.py.
Minor - introduce numeric defines for the IVT offset of hw irqs.
Separate out 16bit PCI-BIOS entry point from regular int 0x1a entry point.
Support using the "extra stack" for all 16bit irq entry points.
Minor - improve comments and grouping of handle_08().
floppy: Introduce 'struct floppy_pio_s' for floppy PIO ops.
floppy: Cleanup floppy irq wait handling.
floppy: Clean up Check Interrupt Status code.
floppy: Move recalibration and results parsing to floppy_cmd().
floppy: Improve floppy_pio() error checking.
floppy: Implement media format sensing.
floppy: Actually do controller reset in floppy_reset().
Minor - note that passing QEMU config via cmos is deprecated.
Cache boot-fail-wait to avoid romfile access after POST.
Rename src/ssdt-susp.dsl to src/ssdt-misc.dsl.
acpi: Eliminate BDAT parameter passing to DSDT code.
Add additional dependency checks to Makefile.
Don't use __FILE__ in virtio-ring.c.
shadow: Don't use PCIDevices list in make_bios_readonly().
smm: Don't use PCIDevices list in smm_setup().
Add VARVERIFY32INIT attribute for variables only available during "init".
Use VARVERIFY32INIT on global variables that point to "tmp" memory.
vgabios: Fix stdvga_perform_gray_scale_summing().
vgabios: Fix cirrus memory clear on mode switch.
Minor - add missing newline to floppy debug statement.
Fix bug in NUMA node setup - don't create SRAT if NUMA not present.
Update README - copy *.aml files for QEMU.
Add dependencies to vgafixup.py and buildversion.sh scripts.
Set ZF prior to keyboard read call in check_for_keystroke().
mptable: Don't describe pci-to-pci bridges.
mptable: Use same PCI irqs as ACPI code.
Cleanup QEMU_CFG_NUMA fw_cfg processing - split into two romfile entries.
Use container_of on romfile entries.
acpi: Move ACPI table definitions from acpi.c to acpi.h.
acpi: Remove dead code with descriptions of bit flags.
acpi: Use cpu_to_leXX() consistently.
Minor - explicitly close files in buildrom.py.
Minor - move "tracked memory alloc" code in pmm.c.
Introduce and convert pmm code to use standard list helpers.
Minor - relocate code in stacks.c to keep low-level thread code together.
Introduce helper function have_threads() in stacks.c.
Convert stacks.c to use standard list manipulation code.
Convert boot.c to use standard list manipulation code.
Convert pciinit.c to use standard list manipulation code.
Convert PCIDevices list to use standard list manipultion code.
Revert "Convert pciinit.c to use standard list manipulation code."
Fix error in hlist_for_each_entry_safe macro.
Convert pciinit.c to use standard list manipulation code.
make qemu_cfg_init depend on QEMU_HARDWARE instead of QEMU
Another fix for hlist_for_each_entry_safe.
Minor - remove debugging dprintf added to pciinit.c.
Fix USB EHCI detection that was broken in hlist conversion of PCIDevices.
Fix bug in CBFS file walking with compressed files.
Laszlo Ersek (1):
Enable VGA output when setting Cirrus-specific mode
Michael S. Tsirkin (2):
acpi: make default DSDT optional
acpi: sync FADT flags from PIIX4 to Q35
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add some logic to detect cross compilers. Add support for "make slof",
which should JustWork[tm] if you are on a ppx64 machine or have a ppc64
cross compiler installed somewhere in your path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Enable parallel ipxe builds. Reduce the recursive make calls. Call
recursive make properly using $(MAKE) $(MAKEFLAGS).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Recurse into vgabios once, adjust dependencies, call make using
$(MAKE) $(MAKEFLAGS) so jobserver mode works.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently, -smbios type=T,NAME=VAL,... adds one field (T,NAME) with
value VAL to fw_cfg for each unique NAME. If NAME occurs multiple
times, the last one's VAL is used (before the QemuOpts conversion, the
first one was used).
Multiple -smbios can add multiple fields with the same (T, NAME).
SeaBIOS reads all of them from fw_cfg, but uses only the first field
(T, NAME). The others are ignored.
"First one wins, subsequent ones get ignored silently" isn't nice. We
commonly let the last option win. Useful, because it lets you
-readconfig first, then selectively override with command line
options.
Clean up -smbios to work the common way. Accumulate the settings,
with later ones overwriting earlier ones. Put the result into fw_cfg
(no more useless duplicates).
Bonus cleanup: qemu_uuid_parse() no longer sets SMBIOS system uuid by
side effect.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We allow either tables or fields for the same type. Makes sense,
because SeaBIOS uses fields only when no tables are present.
We do this by searching the SMBIOS blob for a previously added table
or field. Error messages look like this:
qemu-system-x86_64: -smbios type=1,serial=42: SMBIOS type 1 table already defined, cannot add field
User needs to know that "table" is defined by -smbios file=..., and
"field" by -smbios type=...
Instead of searching the blob, record additions of interest, and check
that. Simpler, and makes better error messages possible:
qemu-system-x86_64: -smbios file=smbios_type_1.bin: Can't mix file= and type= for same type
qemu-system-x86_64: -smbios type=1,serial=42,serial=99: This is the conflicting setting
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So that it can be set in config file for -readconfig.
This tightens parsing of -smbios, and makes it more consistent with
other options: unknown parameters are rejected, numbers with trailing
junk are rejected, when a parameter is given multiple times, last
rather than first wins, ...
MST: drop one chunk to fix build errors
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It exits on all error conditions but one, where it returns -1.
Normalize, and return void.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All callers pass start = 0, and it's doubtful if any other value would
actually do what you expect. Remove the parameter.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Compressed clusters can never be contiguous, therefore the corresponding
flag does not need to be given explicitly to count_contiguous_clusters.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function is not intended to be used on compressed clusters and will
not work correctly, if used anyway, since L2E_OFFSET_MASK is not the
right mask for determining the offset of compressed clusters. Therefore,
assert that the first cluster is not compressed and always include the
compression flag in the mask of significant flags, i.e., stop the search
as soon as a compressed cluster occurs.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In expand_zero_clusters_in_l1, a new cluster is only allocated if it was
not already preallocated. On error, such preallocated clusters should
not be freed, but only the newly allocated ones.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just returning -errno in some cases prevents
trace_qcow2_l2_allocate_done from being executed (and, in one case, also
the unused allocated L2 table from being freed). Always going down the
error path fixes this.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In l2_allocate, the fail path is executed if qcow2_cache_flush fails.
However, the L2 table has not yet been fetched from the L2 table cache.
The qcow2_cache_put in the fail path therefore basically gives an
undefined argument as the L2 table address (in this case).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test case for zero cluster expansion on an image completely filled
with preallocated zero clusters to test 061.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the expanded_clusters bitmap is addressed using host offsets in
the underlying image file, the correct size to use for allocating the
bitmap is not determined by the guest disk image but by the underlying
host image file.
Furthermore, this size may change during the expansion due to cluster
allocations on growable image files. In this case, the bitmap needs to
be resized as well to reflect the growth.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A lot of image filename and paths are used unquoted. Quote these to
make sure that directories / filenames with spaces are not problematic.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For image formats that are not "QEMU native", but supported for
compatibility, it is useful to verify that an image created with
the 'gold standard' native tool can be read / written to successfully
by QEMU.
In addition to testing non-native images, this could also be useful to
test against image files created by older versions of QEMU.
This provides a directory to store small sample images, for use by
scripts in tests/qemu-iotests.
Image files should be compressed with bzip2.
To use a sample image from a bash script, the _use_sample_img function
will copy and decompress the image into $TEST_DIR, and set $TEST_IMG to
be the decompressed sample image copy. To cleanup, call
_cleanup_test_img as normal.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QMP/qmp.py is renamed to scripts/qmp/qmp.py, fix the search path in iotests.py.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If qcow2_alloc_cluster_link_l2 is called with a QCowL2Meta describing a
request crossing L2 boundaries, a buffer overflow will occur. This is
impossible right now since such requests are never generated (every
request is shortened to L2 boundaries before) and probably also
completely unintended (considering the name "QCowL2Meta"), however, it
is still worth an assertion.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEDHeader is read, and written, directly from on-disk images
via bdrv_pread()/write(). To avoid any unintentional padding,
these structs should be packed.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QCowHeader and QCowExtension are structs that reside in the on-disk
image format, and are read and written directly via bdrv_pread()/write(),
and as such should be packed to avoid any unintentional struct padding.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VHD footer and header structs (vhd_footer and vhd_dyndisk_header)
are on-disk structures for the image format, and as such should be
packed.
Go ahead and make these typedefs as well, with the preferred QEMU
naming convention, so that the packed attribute is used consistently
with the struct.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The header struct VdiHeader is an on-disk structure for the image
format, and as such should be packed.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is qemu patch 2 to fix Xen HVM S3 bug, adding qemu
xen logic. When qemu wakeup, qemu xen logic is notified and
hypercall to xen hypervisor to unpause domain.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Currently Xen hvm s3 has a bug coming from the difference between
qemu-traditioanl and qemu-xen. For qemu-traditional, the way to
resume from hvm s3 is via 'xl trigger' command. However, for
qemu-xen, the way to resume from hvm s3 inherited from standard
qemu, i.e. via QMP, and it doesn't work under Xen.
The root cause is, for qemu-xen, 'xl trigger' command didn't reset
devices, while QMP didn't unpause hvm domain though they did qemu
system reset.
We have two qemu patches and one xl patch to fix Xen hvm s3 bug.
This patch is the qemu patch 1. It adjusts qemu wakeup so that
Xen s3 resume logic (which will be implemented at qemu patch 2)
will be notified after qemu system reset.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Less conditional compilation. Merge an add insn with the indexed
memory load insn. Load the tlb addend earlier. Avoid the address
update memory form.
Fix a bug in not allowing large enough tlb offsets for some guests.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Previously we'd only handle 16-bit offsets from memory operand without falling
back to indexed, but it's easy to use ADDIS to handle full 32-bit offsets.
This also lets us unify code that existed inline in tcg_out_op for handling
addition of large constants.
The new R2 temporary was marked reserved for the AIX calling convention, but
the register really is call-clobbered and since tcg generated code has no use
for a TOC, it's available for use.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Remove conditionalization from tcg_target_reg_alloc_order, relying on
reserved_regs to prevent register allocation that shouldn't happen.
So R11 is now present in reg_alloc_order for __APPLE__, but also now
reserved.
Sort reg_alloc_order into call-saved, call-clobbered, and parameters.
This reduces the effect of values getting spilled and reloaded before
function calls.
Whether or not it is reserved, R2 (TOC) is always call-clobbered.
Signed-off-by: Richard Henderson <rth@twiddle.net>
While these are rare from code that's been through the optimizer,
it's not uncommon within the tcg backend.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead of bare N, for clarity. The only (intentional) exception made
is for insns that encode R|0, i.e. when R0 encoded into the insn is
interpreted as zero not the contents of the register.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The fix is that sparc has so many mmu modes that the last one overflowed
the 16-bit signed offset we assumed would fit. Handle this, and check
the new assumption at compile time.
Load the tlb addend earlier for the fast path.
Remove the explicit address + addend and make use of index addressing.
Adjust constraints for qemu_ld64 such that we don't clobber the address
register or tlb addend before loading both values.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Coding style fixes. Use TCGReg enumeration values instead of raw
numbers. Don't needlessly pull the whole TCGLabelQemuLdst struct
into local variables. Less conditional compilation.
No functional changes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
While these are rare from code that's been through the optimizer,
it's not uncommon within the tcg backend.
Signed-off-by: Richard Henderson <rth@twiddle.net>
These use a 32-bit load-of-immediate to save a mflr+addi+mtlr sequence.
Tested with a Windows 98 guest (pretty much the most recent thing I
could run on my PPC machine) and kvm-unit-tests's sieve.flat. The
speed up for sieve.flat is as high as 10% for qemu-system-i386, 25%
(no kidding) for qemu-system-x86_64 on my PowerBook G4.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the AIX ABI, the function pointer and small area pointer need
to be loaded in the trampoline. The trampoline instead is called
with a normal BL instruction.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When there are no snapshots qemu_rbd_snap_list() returns 0 and the
snapshot table pointer is NULL. Don't forget to free the snaps buffer
we allocated for librbd rbd_snap_list().
When the function succeeds don't forget to free the snaps buffer after
calling rbd_snap_list_end().
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch fixes a warning from gcc (Debian 4.6.3-14+rpi1) 4.6.3:
block/stream.c:141:22: error:
‘copy’ may be used uninitialized in this function [-Werror=uninitialized]
This is not a real bug - a better compiler would not complain.
Now 'copy' has always a defined value, so the check for ret >= 0
can be removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some drivers will have driver specifics options but no filename.
This new bool allow the block layer to treat them correctly.
The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and
not having .bdrv_open.
The first exception to this rule will be the quorum driver.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit "block: Error parameter for open functions", error output
is more verbose. Update test case output file to follow the change.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We use the extent size as cluster size for flat extents (where no L1/L2
table is allocated so it's safe) reuse sector calculating code with
sparse extents.
Don't pass in the cluster size for adding flat extent, just set it to
sectors later, then the cluster size checking will not fail.
The cluster_sectors is changed to int64_t to allow big flat extent.
Without this, flat extent opening is broken:
# qemu-img create -f vmdk -o subformat=monolithicFlat /tmp/a.vmdk 100G
Formatting '/tmp/a.vmdk', fmt=vmdk size=107374182400 compat6=off subformat='monolithicFlat' zeroed_grain=off
# qemu-img info /tmp/a.vmdk
image: /tmp/a.vmdk
file format: raw
virtual size: 0 (0 bytes)
disk size: 4.0K
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
if the call is invoked through bdrv_is_allocated the caller might
expect *pnum = 0 on error. however, a new implementation of
bdrv_get_block_status might only return a negative exit value on
error while keeping *pnum untouched.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When trying to update the refcounts for a snapshot, the return value of
update_refcount on a compressed cluster was pretty much ignored,
cancelling the update on error but returning 0. This is caused by an
inner "ret" variable shadowing the outer one (the latter is used in the
return statement).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 052 uses qemu-io -s which will result in bdrv_open trying to create
a temporary snapshot file in /tmp. However, since O_DIRECT and tmpfs
do not work well together, disable this test for -nocache.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test that backing.file.filename option can be parsed and override the
backing file from image (backing file reflected with "info block").
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Providing backing.file.filename doesn't override backing file as expected:
$ x86_64-softmmu/qemu-system-x86_64 -drive \
file=/tmp/child.qcow2,backing.file.filename=/tmp/fake.qcow2
qemu-system-x86_64: -drive \
file=/tmp/child.qcow2,backing.file.filename=/tmp/fake.qcow2: could not
open disk image /tmp/child.qcow2: Can't specify 'file' and 'filename'
options at the same time
With
$ qemu-img info /tmp/child.qcow2
image: /tmp/child.qcow2
file format: qcow2
virtual size: 1.0G (1073741824 bytes)
disk size: 196K
cluster_size: 65536
backing file: /tmp/fake.qcow2
This fixes it by calling bdrv_get_full_backing_filename only if
backing.file.filename is not provided. Also save the backing file name
to bs->backing_file so the information is correct with HMP "info block".
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ram_handle_compressed() should be aware of size > TARGET_PAGE_SIZE.
migration-rdma can call it with larger size.
Signed-off-by: Isaku Yamahata <yamahata@private.email.ne.jp>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Later is_zero_page will be used for non TARGET_PAGE_SIZE
range.
And rename it to is_zero_range as it isn't page size any more.
Signed-off-by: Isaku Yamahata <yamahata@private.email.ne.jp>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The printf args are uint64_t and with -Werr QEMU doesn't compile with
migration debugging turned on unless this is fixed. Fix it.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This adds version supporting macros VMSTATE_STRUCT_POINTER_TEST_V
and VMSTATE_STRUCT_POINTER_V in addition to the already existing
VMSTATE_STRUCT_POINTER and VMSTATE_STRUCT_POINTER_TEST macros.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
- It can't be determined by RDMAContext::cm_id != NULL if the connection
is established or not.
- RDMAContext::cm_id is leaked and not destroyed because it is set to NULL
too early.
- RDMAContext::qp is created by rdma_create_qp() so that it should be destroyed
by rdma_destroy_qp(). not ibv_destroy_qp()
Cc: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Isaku Yamahata <yamahata@private.email.ne.jp>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_file_rate_limit() never return negative value since the refactor
by Commit 1964a39, this patch gets rid of the negative check for it,
adjust bytes_transferred and return value correspondingly in
ram_save_iterate().
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add comments for qemu_file_get_error(), as its return value
is not very clear.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Define PARAM so that we have two versions of the "desc_codec
and family" structs. Add a property called "mixer" whose default
value depends on whether CONFIG_MIXEMU is defined or not which
will help us call the appropriate instance init functions.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move common defines and structs to a header file.
The next commit will include it twice, once for a device with a
mixer, and once for device without a mixer.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
av1474@comtv.ru bounces, and I havn't seen malc @ qemu-devel for quite a
while (anyone knows what is up?). Adding myself as audio maintainer, so
audio patches don't fall through the cracks that easily.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the host lacks SOCK_CLOEXEC, bail out with -EINVAL.
If the host lacks SOCK_ONONBLOCK, try to emulate it with fcntl()
and O_NONBLOCK.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
With nptl enabled, atomic_cmpxchg_32 and atomic_barrier
system calls are needed. This patch enabled really dummy
versions of the system calls, modeled after the m68k
kernel code.
With this patch I am able to execute m68k binaries
with qemu linux-user (busybox compiled for coldfire).
[v2] que an segfault instead of returning a EFAULT
to keep in line with kernel code.
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
microMIPS instructions that cause breakpoint exceptions come in
16-bit and 32-bit variants. When handling exceptions caused by
such instructions, the instruction type needs to be taken into
account when extracting the break code.
The code has also been restructured for better clarity.
Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Previous implementation does not take into account that SOL_SOCKET constant
can be arch specific. This change fixes some issues with sendmsg/recvmsg.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The binfmt_misc module can calculate the credentials and security
token according to the binary instead of to the interpreter if the
'C' flag is enabled.
To be able to execute non-readable binaries, this flag implies 'O'
flag. When 'O' flag is enabled, bintfmt_misc opens the file for
reading and pass the file descriptor to the interpreter.
References:
linux/Documentation/binfmt_misc.txt ['O' and 'C' description]
linux/fs/binfmt_misc.c linux/fs/binfmt_elf.c [ AT_EXECFD usage ]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch allows to have IP addresses in correct order
in the case of "netstat -nr" when the endianess of the
guest differs from one of the host.
For instance, an m68k guest on an x86_64 host:
WITHOUT this patch:
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 1.3.0.10 0.0.0.0 UG 0 0 0 eth0
0.3.0.10 0.0.0.0 0.255.255.255 U 0 0 0 eth0
$ cat /proc/net/route
Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT
eth0 00000000 0103000A 0003 0 0 0 000000000 0 0
eth0 0003000A 00000000 0001 0 0 0 00FFFFFF0 0 0
WITH this patch:
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 10.0.3.1 0.0.0.0 UG 0 0 0 eth0
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
$ cat /proc/net/route
Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT
eth0 00000000 0a000301 0003 0 0 0 000000000 0 0
eth0 0a000300 00000000 0001 0 0 0 ffffff000 0 0
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The name field of MIPS_SYS isn't actually used; it's just documentation.
But adjust the umount entries to match mips/syscall_nr.h anyway.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
It has been pointed out on LKML that the alpha umount syscall numbers
are named wrong, and a patch to rectify that has been posted for 3.11.
Glibc works around this by treating NR_umount as NR_umount2 if
NR_oldumount exists. That's more complicated than we need in QEMU,
given that we control linux-user/*/syscall_nr.h.
This is the last instance of TARGET_NR_oldumount, so delete that from
the strace.list.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
# By Aurelien Jarno (1) and Vincenzo Maffione (1)
# Via Stefan Hajnoczi
* stefanha/net:
e1000: NetClientInfo.receive_iov implemented
pcnet-pci: mark I/O and MMIO as LITTLE_ENDIAN
Message-id: 1379699613-5338-1-git-send-email-stefanha@redhat.com
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
virtio-blk: do not relay a previous driver's WCE configuration to the current
blockdev: do not default cache.no-flush to true
block: don't lose data from last incomplete sector
qcow2: Correct snapshots size for overlap check
coroutine: fix /perf/nesting coroutine benchmark
coroutine: add qemu_coroutine_yield benchmark
qemu-timer: do not take the lock in timer_pending
qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
qemu-timer: drop outdated signal safety comments
osdep: warn if open(O_DIRECT) on fails with EINVAL
libcacard: link against qemu-error.o for error_report()
Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: add feature kvm_pv_unhalt
linux-headers: update to 3.12-rc1
target-i386: forward CPUID cache leaves when -cpu host is used
linux-headers: update to 3.11
kvm: fix traces to use %x instead of %d
kvmvapic: Clear also physical ROM address when entering INACTIVE state
kvmvapic: Enter inactive state on hardware reset
kvmvapic: Catch invalid ROM size
kvm irqfd: support direct msimessage to irq translation
fix steal time MSR vmsd callback to proper opaque type
kvm: warn if num cpus is greater than num recommended
cpu: Move cpu state syncs up into cpu_dump_state()
exec: always use MADV_DONTFORK
Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
# By Hervé Poussineau (5) and Stefan Weil (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi
lsi: add 53C810 variant
lsi: remove todo
lsi: ignore write accesses to CTEST0 registers
lsi: check ssid versus sdid only if ssid is valid
lsi: use constant name instead of its value
KVM request types are normally defined using hex constants but QEMU traces
print decimal values instead, which is not very convenient.
This changes the request type format from %d to %x.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch implements the NetClientInfo.receive_iov method for the
e1000 device emulation. In this way a network backend that uses
qemu_sendv_packet() can deliver the fragmented packet without
requiring an additional copy in the frontend/backend network code
(nc_sendv_compat() function).
The existing method NetClientInfo.receive has been reimplemented
using the new method.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that the memory subsystem is propagating the endianness correctly,
the pcnet-pci device should have its I/O ports and MMIO memory marked
as LITTLE_ENDIAN, as PCI devices are little endian.
This makes the pcnet-pci NIC to work again on big endian MIPS Malta
(default NIC).
Cc: qemu-stable@nongnu.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following sequence happens:
- the SeaBIOS virtio-blk driver does not support the WCE feature, which
causes QEMU to disable writeback caching
- the Linux virtio-blk driver resets the device, finds WCE is available
but writeback caching is disabled; tells block layer to not send cache
flush commands
- the Linux virtio-blk driver sets the DRIVER_OK bit, which causes
writeback caching to be re-enabled, but the Linux virtio-blk driver does
not know of this side effect and cache flushes remain disabled
The bug is at the third step. If the guest does know about CONFIG_WCE,
QEMU should ignore the WCE feature's state. The guest will control the
cache mode solely using configuration space. This change makes Linux
do flushes correctly, but Linux will keep SeaBIOS's writethrough mode.
Hence, whenever the guest is reset, the cache mode of the disk should
be reset to whatever was specified in the "-drive" option. With this
change, the Linux virtio-blk driver finds that writeback caching is
enabled, and tells the block layer to send cache flush commands
appropriately.
Reported-by: Rusty Russell <rusty@au1.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
That's why all my VMs were so fast lately. :)
This changed in 1.6.0 by mistake in patch 29c4e2b (blockdev: Split up
'cache' option, 2013-07-18).
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To read the last sector that is not aligned to sector boundary, current
code for growable backends, since commit 893a8f6 "block: Produce zeros
when protocols reading beyond end of file", drops the data and directly
returns zeroes. That is incorrect.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 3435f39513 reduced the ifdeffery with
this result for MinGW:
exec.c: In function ‘qemu_ram_free’:
exec.c:1239:17: warning:
implicit declaration of function ‘munmap’ [-Wimplicit-function-declaration]
exec.c:1239:17: warning:
nested extern declaration of ‘munmap’ [-Wnested-externs]
exec.c:1239: undefined reference to `munmap'
Add some ifdeffery again to fix this.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Report from clang analyzer:
clock.c:42:15: warning:
Value stored to 'cpu' during its initialization is never read
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
error: suggest parentheses around comparison in operand of ‘&’ [-Werror=parentheses]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When in Long Mode, cpu_x86_seg_cache() logs "DS16" because the Default
operation size bit (D/B bit) is not set for Long Mode Data Segments since
there are only Data Segments in Long Mode and no explicit 16/32/64-bit
Descriptors.
This patch fixes this by checking the Long Mode Active bit of the hidden
flags variable and logging "DS" if it is set. (I.e. in Long Mode all Data
Segments are logged as "DS")
Signed-off-by: Tobias Markus <tobias@markus-regensburg.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Event qxl_render_blit_guest_primary_initialized is unused since commit
c58c7b9, drop it.
Commit 42e5b4c moved hw/ppc/xics.c to hw/intc/xics.c without updating
the comment in trace-events.
"scripts/cleanup-trace-events.pl trace-events | diff trace-events" is
now clean again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Debian busybox-static for alpha has a load address of 0x0000000120000000
which is mapped to 0x0000000020000000 for 32 bit hosts.
qemu-alpha uses the TCG opcodes qemu_ld32, qemu_ld64, qemu_st32 and
qemu_st64 which all raise the assertion (taddr == host_addr).
Remove all assertions of this type because they are either wrong or
unnecessary (when sizeof(tcg_target_ulong) >= sizeof(target_ulong)).
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a missing "function" and replace "and" by "any".
BSD and Linux use the same documentation here, so fix both.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
tci.c is also a maintained part of the TCI implementation.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The page dump writes a table with 3 abi_ulong values in each row.
These values take 8 or 16 characters (depending on sizeof abi_ulong).
Fix the table headings to be aligned with the table columns.
old:
start end size prot
0000000120000000-000000012021e000 000000000021e000 rwx
0000004000000000-0000004000002000 0000000000002000 ---
0000004000002000-0000004000802000 0000000000800000 rw-
new:
start end size prot
0000000120000000-000000012021e000 000000000021e000 rwx
0000004000000000-0000004000002000 0000000000002000 ---
0000004000002000-0000004000802000 0000000000800000 rw-
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, we are enforcing the _FORTIFY_SOURCE=2 without any
previous detection if the macro has been already defined, e.g.
by environment, or is just enabled by compiler by default.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Hans de Goede (6) and Gerd Hoffmann (1)
# Via Gerd Hoffmann
* kraxel/usb.90:
usb: Fix iovec memleak on combined-packet free
usb: Also reset max_packet_size on ep_reset
xhci: Fix memory leak on xhci_disable_ep
xhci: Add xhci_epid_to_usbep helper function
xhci: Init a transfers xhci, slotid and epid member on epctx alloc
xhci: Fix number of streams allocated when using streams
usb: remove old usb-host code
Message-id: 1379583298-7524-1-git-send-email-kraxel@redhat.com
Add simple support for SCLP line-mode also known as operating
system messages. This can be added in addition to or instead of
the SCLP full screen console with -device sclplmconsole.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Move conversion tables to header file.
- In SCLP line mode processing EBCDIC/ASCII conversion is needed.
- An additional EBCDIC to ASCII conversion function is added.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently all handlers (quiesce, console) only handle one event type.
Some drivers will handle multiple (compatible) event types. Rework the
code accordingly.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
The event_type variable is never used. Get rid of it.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Currently we announce interchanged receive/send masks. This did not
trigger a bug, since the sclp console has the same masks for
send/receive and the Linux guest does not check the sclp mask for simple
events like quiesce. With other event users like the sclp line mode
console, we will have different send/receive bits. Fix it.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Make the handler for SCLP Read Event Data deal with notifications
for multiple sources correctly.
Signed-off-by: Ralf Hoppe <rhoppe@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split bigger patch into smaller independent chunks]
Reviewed-by: Alexander Graf <agraf@suse.de>
Add reset() functions for event-facility, sclpconsole, and sclpquiesce.
The reset() functions perform variable initialization
at IPL and e.g. when monitor system_reset is called.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds the necessary life migration pieces to sclpquiesce
by using the vmstate_register.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds the necessary life migration pieces to the sclp code
by using vmstate_register.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
To use VMState for migration, we need to adapt some sclp code:
- allocate console buffer as part of the console
- change semantic of sclpconsole offset fields
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch implements subcode 0 of diag 308. This is necessary for kexec
(without kdump). The main difference to subcode 1 is that all CPUs get
a full reset, instead of the architectured CPU reset (which leaves all
registers untouched).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Using s->snapshots_size instead of snapshots_size for the metadata
overlap check in qcow2_write_snapshots leads to the detection of an
overlap with the main qcow2 image header when deleting the last
snapshot, since s->snapshots_size has not yet been updated and is
therefore non-zero. However, the offset returned by qcow2_alloc_clusters
will be zero since snapshots_size is zero. Therefore, an overlap is
detected albeit no such will occur.
This patch fixes this by replacing s->snapshots_size by snapshots_size
when calling qcow2_pre_write_overlap_check.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The IO instruction handlers now take care of setting the CC value on
their own, so that the confusing return code magic in kvm_handle_css_inst()
is not needed anymore.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Moved the setcc() function to cpu.h so that it can be used by other
files, too. It now also does not modify the kvm state anymore since
this gets updated during kvm_arch_put_registers() anyway.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Rebuild of the virtio-ccw rom containing these patches:
1. s390/ipl: Fix waiting for virtio processing
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The guest side must not manipulate the index for the used buffers. Instead,
remember the state of the used buffer locally and wait until it has moved.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The prstatus of an s390x dump contains several padding areas. Zero out
these bytes to make reading the notes section easier with a hexdump.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The SCLP instruction is priviledged, so we should make sure that
we generate an exception when it is called from the problem state.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
I don't know yet if want this feature on by default, so for now I'm
just adding support for "-cpu ...,+kvm_pv_unhalt".
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some users running cpu intensive tasks checking the cache CPUID leaves at
startup and making decisions based on the result reported that the guest was
not reflecting the host CPUID leaves when -cpu host is used.
This patch fix this.
Signed-off-by: Benoît Canet <benoit@irqsave.net>
[Rename new field to cache_info_passthrough - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM request types are normally defined using hex constants but QEMU traces
print decimal values instead, which is not very convenient.
This changes the request type format from %d to %x.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid misinterpreting INACTIVE after migration as old qemu-kvm's
STANDBY, also clear rom_state_paddr when going back to this state.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ROM layout may change after reset of devices are hotplugged, so we have
to pick up the physical address again when the ROM is initialized. This
is best achieved by resetting the state to INACTIVE.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If not caught early, a zero-length ROM will cause a NULL-pointer access
later on in patch_hypercalls when allocating a zero-length ROM copy and
trying to read from it.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On PPC64 systems MSI Messages are translated to system IRQ in a PCI
host bridge. This is already supported for emulated MSI/MSIX but
not for irqfd where the current QEMU allocates IRQ numbers from
irqchip and maps MSIMessages to IRQ in the host kernel.
This adds a new direct mapping flag which tells
the kvm_irqchip_add_msi_route() function that a new VIRQ
should not be allocated, instead the value from MSIMessage::data
should be used. It is up to the platform code to make sure that
this contains a valid IRQ number as sPAPR does in spapr_pci.c.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The comment in kvm_max_vcpus() states that it's using the recommended
procedure from the kernel API documentation to get the max number
of vcpus that kvm supports. It is, but by always returning the
maximum number supported. The maximum number should only be used
for development purposes. qemu should check KVM_CAP_NR_VCPUS for
the recommended number of vcpus. This patch adds a warning if a user
specifies a number of cpus between the recommended and max.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The x86 and ppc targets call cpu_synchronize_state() from their
*_cpu_dump_state() callbacks to ensure that up to date state is dumped
when KVM is enabled (for example when a KVM internal error occurs).
Move this call up into the generic cpu_dump_state() function so that
other KVM targets (namely MIPS) can take advantage of it.
This requires kvm_cpu_synchronize_state() and cpu_synchronize_state() to
be moved out of the #ifdef NEED_CPU_H in <sysemu/kvm.h> so that they're
accessible to qom/cpu.c.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: qemu-ppc@nongnu.org
Cc: kvm@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
MADV_DONTFORK prevents fork to fail with -ENOMEM if the default
overcommit heuristics decides there's too much anonymous virtual
memory allocated. If the KVM secondary MMU is synchronized with MMU
notifiers or not, doesn't make a difference in that regard.
Secondly it's always more efficient to avoid copying the guest
physical address space in the fork child (so we avoid to mark all the
guest memory readonly in the parent and so we skip the establishment
and teardown of lots of pagetables in the child).
In the common case we can ignore the error if MADV_DONTFORK is not
available. Leave a second invocation that errors out in the KVM path
if MMU notifiers are missing and KVM is enabled, to abort in such
case.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The /perf/nesting benchmark is broken because the counters are
not reset after each iteration. Therefore, nesting is done only
on the first iteration, and skipped on every other.
This patch fixes the issue, and reduces the number of iterations
to make it possible to run the benchmark in a reasonable amount of
time.
Signed-off-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Current coroutine performance benchmarks test only coroutine creation,
either directly or in a nested way. This patch adds a benchmark to
evaluate the performance of qemu_coroutine_yield.
Signed-off-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The USBPacket-s in the transfers need to be cleaned up so that the memory
allocated by the iovec in there gets freed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
And use it instead of prying the USBEndpoint out of the packet struct
in various places.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Transfers are part of an epctx, which is part of a slot, which is part of
a xhci. Transfers cannot dynamically be moved from one epctx to another,
so once created their xhci, slotid and epid are constant, so lets set these
up at creation time, rather then re-initializing them with the same
value each time a transfer gets submitted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the xhci spec the total number of streams is
2 ^ (MaxPStreams + 1), and this is also how the Linux xhci driver
uses this field.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The usb-host code has been rewritten for qemu 1.5 to use libusb,
the old code has been left in as temporary fallback. Now we are
two releases further out, targeting the 1.7 release. No major
issues with the new code poped up until now. Time to remove it
from tre tree. Should we ever need it again for some reason --
git has a copy for us in the history.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We can deduce the result from expire_time, by making it always -1 if
the timer is not in the active_timers list. We need to check against
negative times passed to timer_mod_ns; clamping them to zero is not
a problem because the only clock that has a zero value at VM startup
is QEMU_CLOCK_VIRTUAL, and it is monotonic so it cannot be non-zero.
QEMU_CLOCK_HOST, instead, is not monotonic but it cannot go to negative
values unless the host time is seriously screwed up and points to
the 1960s.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce QEMUTimerList->active_timers_lock to protect the linked list
of active timers. This allows qemu_timer_mod_ns() to be called from any
thread.
Note that vm_clock is not thread-safe and its use of
qemu_clock_has_timers() works fine today but is also not thread-safe.
The purpose of this patch is to eventually let device models set or
cancel timers from a vcpu thread without holding the global mutex.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
host_alarm_handler() is invoked from the signal processing thread
(currently the iothread). Previously we did processing in a real signal
handler with signalfd and therefore needed signal-safe timer code.
Today host_alarm_handler() just marks the alarm timer as expired/pending
and notifies the main loop using qemu_notify_event().
Therefore these outdated comments about signal safety can be dropped.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Print a warning when opening a file O_DIRECT fails with EINVAL. This
saves users a lot of time trying to figure out the EINVAL error, which
is typical when attempting to open a file O_DIRECT on Linux tmpfs.
Reported-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Drop unneeded info, fix some of the examples and rename QEMU Monitor
Protocol to QEMU Machine Protocol.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This file should be generated in the BUILD_DIR, as all other docs.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Populate it with all scripts stored in QMP/. Also fixes trailing
whitespaces in qmp-shell and qmp.py.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Nowdays rom size is fixed at 8192 for live migration compat reasons.
So we can ditch the pointless math trying to calculate the size needed.
Also make the size sanity check fail at compile time not runtime.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Debian wheezy includes libiscsi-dev 1.4.0 which does not provide
SCSI_PROVISIONING_TYPE_DEALLOCATED. Drop iscsi_co_get_block_status
in this case to allow compilation without errors.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Liu Ping Fan (3) and Jan Kiszka (1)
# Via Jan Kiszka
* kiszka/queues/slirp:
slirp: clean up slirp_update_timeout
slirp: set mainloop timeout with more precise value
slirp: define timeout as macro
slirp: make timeout local
Message-id: cover.1379415024.git.jan.kiszka@siemens.com
# By Max Reitz (16) and others
# Via Kevin Wolf
* kwolf/for-anthony: (33 commits)
qemu-iotests: Fix test 038
block: Assert validity of BdrvActionOps
qemu-iotests: Cleanup test image in test number 007
qemu-img: fix invalid JSON
coroutine: add ./configure --disable-coroutine-pool
qemu-iotests: Adjustments due to error propagation
qcow2: Use Error parameter
qemu-img create: Emit filename on error
block: Error parameter for create functions
block: Error parameter for open functions
bdrv: Use "Error" for creating images
bdrv: Use "Error" for opening images
qemu-iotests: add 057 internal snapshot for block device test case
hmp: add interface hmp_snapshot_delete_blkdev_internal
hmp: add interface hmp_snapshot_blkdev_internal
qmp: add interface blockdev-snapshot-delete-internal-sync
qmp: add interface blockdev-snapshot-internal-sync
qmp: add internal snapshot support in qmp_transaction
snapshot: distinguish id and name in snapshot delete
snapshot: new function bdrv_snapshot_find_by_id_and_name()
...
Message-id: 1379073063-14963-1-git-send-email-kwolf@redhat.com
# By Paolo Bonzini (1) and Peter Maydell (1)
# Via Richard Henderson
* rth/tgt-i386:
target-i386: Only provide CMOV and friends if feature bit set
target-i386: fix disassembly with PAE=1, PG=0
Message-id: 1379010496-5875-1-git-send-email-rth@twiddle.net
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
spapr-vscsi: Report error on unsupported MAD requests
spapr-vscsi: Adding VSCSI capabilities
iscsi: split discard requests in multiple parts
iscsi: add .bdrv_get_block_status
iscsi: add logical block provisioning information to iscsilun
hw/scsi/lsi53c895a: Use deposit32 rather than handcoded shift/mask
hw/scsi/lsi53c895a: Use sextract32 for sign-extension
scsi: Fix scsi_bus_legacy_add_drive() scsi-generic with serial
virtio-scsi: Make type virtio-scsi-common abstract
spapr-vscsi: add task management
scsi: prefer UUID to VM name for the initiator name
Message-id: 1378984634-765-1-git-send-email-pbonzini@redhat.com
If slirp needs to emulate tcp timeout, then the timeout value
for mainloop should be more precise, which is determined by
slirp's fasttimo or slowtimo. Achieve this by swap the logic
sequence of slirp_pollfds_fill and slirp_update_timeout.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Currently, treat it exactly as a 53C895A.
53C895A is a 53C810 with more capabilities, so this should work.
However, this lets us test different code paths on Linux, which
don't use lastest features if it detect a 810, or on some OSes
which only support 810 and not 895A (like very old Windows NT
versions).
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LSI emulation has been tested with Linux on PPC platform.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
53C895A datasheet says that this register is read/write, and that the value
returned on read access is dependant of DMA FIFO state. However, nothing is
said for written value.
53C810A datasheet gives more insight about this register:
"This was a general purpose read/write register in previous SYM53C8XX
family chips. Although it is still a read/write register, Symbios reserves
the right to use these bits for future 53C8XX family enhancements."
This prevents going to the default case, which prints an error message.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This prevents some (invalid) error messages on console.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This check is useless, as bigger addresses will be ignored when
added to 'io' MemoryRegion, which has a size of 64K.
However, some architectures don't use the 'io' MemoryRegion, like
the alpha and versatile platforms. They create a PCI I/O region
bigger than 64K, so let them handle PCI I/O BARs in the higher range.
MST: reinstated work-around for BAR sizing.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
io base register at 0x40 is cleared on reset,
but io is not disabled until some other event
happens to call pm_io_space_update.
Invoke pm_io_space_update directly to make this
consistent.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For Q35, MMCFG address and size are guest configurable.
Update w32 property to make it behave accordingly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Test 038 uses asynchronous I/O, resulting (potentially) in a different
output for every run (regarding the order of the I/O accesses). This can
be fixed by simply sorting the I/O access messages, since their order is
irrelevant anyway (for this asynchonous I/O).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The instructions CMOVcc, FCMOVcc and F[U]COMI[P] should only be
present if the CMOV feature bit is set. Add missing feature bit
checks so we correctly fault if emulating a 486 or 586.
This fixes bug LP:1201446.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
CR4.PAE=1 will not enable paging if CR0.PG=0, but the "if" chain
in x86_cpu_get_phys_page_debug says otherwise. Check CR0.PG
before everything else.
Fixes "-d in_asm" for a code section at the beginning of OVMF.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
We abort() on memory allocation failure. abort() is appropriate for
programming errors. Maybe most memory allocation failures are
programming errors, maybe not. But guest memory allocation failure
isn't, and aborting when the user asks for more memory than we can
provide is not nice. exit(1) instead, and do it in just one place, so
the error message is consistent.
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1375276272-15988-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Another issue missed in commit fdec991 is -mem-path: it needs to be
rejected only for old S390 KVM, not for any S390. Not that I
personally care, but the ifdeffery in qemu_ram_alloc_from_ptr() annoys
me.
Note that this doesn't actually make -mem-path work, as the kernel
doesn't (yet?) support large pages in the host for KVM guests. Clean
it up anyway.
Thanks to Christian Borntraeger for pointing out the S390 kernel
limitations.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1375276272-15988-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Old S390 KVM wants guest RAM mapped in a peculiar way. Commit 6b02494
implemented that.
When qemu_ram_remap() got added in commit cd19cfa, its code carefully
mimicked the allocation code: peculiar way if defined(TARGET_S390X) &&
defined(CONFIG_KVM), else normal way.
For new S390 KVM, we actually want the normal way. Commit fdec991
changed qemu_ram_alloc_from_ptr() accordingly, but forgot to update
qemu_ram_remap(). If qemu_ram_alloc_from_ptr() maps RAM the normal
way, but qemu_ram_remap() remaps it the peculiar way, remapping
changes protection and flags, which it shouldn't.
Fortunately, this can't happen, as we never remap on S390.
Replace the incorrect code with an assertion.
Thanks to Christian Borntraeger for help with assessing the bug's
(non-)impact.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
With -mem-path, qemu_ram_alloc_from_ptr() first tries to allocate
accordingly, but when it fails, it falls back to normal allocation.
The fall back allocation code used to be effectively identical to the
"-mem-path not given" code, until it started to diverge in commit
432d268. I believe the code still works, but clean it up anyway: drop
the special fall back allocation code, and fall back to the ordinary
"-mem-path not given" code instead.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
In qmp_transaction, assert that the BdrvActionOps to be used is actually
valid.
This assertion failing is very improbable, however, it might happen, if
a new TransactionActionKind is introduced "out of order" and the
actions[] array is not updated.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-iotests number 007 doesn't do test image cleanup. This will affect
those protocols that expect a clean state before every test. Hence
ensure that test image is cleaned up in this test.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The existing driver just dropped unsupported requests. This adds error
responses to those unhandled requests.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements capabilities exchange between vscsi host and client. As
at the moment no capability is supported, put zero flags everywhere and
return.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Replace .bdrv_aio_discard with .bdrv_co_discard so that discard
requests can be split in multiple parts, each for a small amount
of sectors.
This is useful because we expose a generic API with no limit
on the amount of sectors that can be unmapped in one request.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'gthread' coroutine backend was written before the freelist (aka
pool) existed in qemu-coroutine.c.
This means that every thread is expected to exit when its coroutine
terminates. It is not possible to reuse threads from a pool.
This patch automatically disables the pool when 'gthread' is used. This
allows the 'gthread' backend to work again (for example,
tests/test-coroutine completes successfully instead of hanging).
I considered implementing thread reuse but I don't want quirks like CPU
affinity differences due to coroutine threads being recycled. The
'gthread' backend is a reference backend and it's therefore okay to skip
the pool optimization.
Note this patch also makes it easy to toggle the pool for benchmarking
purposes:
./configure --with-coroutine-backend=ucontext \
--disable-coroutine-pool
Reported-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When opening/creating images, propagating errors instead of immediately
emitting them on occurrence results in errors generally being printed on
a single line rather than being split up into multiple ones. This in
turn requires adjustments to some test results.
Also, test 060 used a sed to filter out the test image directory and
format by removing everything from the affected line after a certain
keyword; this now also removes the error message itself, which can be
fixed by using _filter_testdir and _filter_imgfmt.
Finally, _make_test_img in common.rc did not filter out the test image
directory etc. from stderr. This has been fixed through a redirection of
stderr to stdout (which is already done in _check_test_img and
_img_info).
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_img_create generally does not emit the target filename, although
this is pretty important information. Therefore, prepend its error
message with the output filename (if an error occurs).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to bdrv_create and its associated functions to
allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Create in transaction and deletion in single command will be tested.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is hard to make both id and name optional in hmp console as qmp
interface, so this interface require user to specify name.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This interface use id and name as optional parameters, to handle the
case that one image contain multiple snapshots with same name which
may be '', but with different id.
Adding parameter id is for historical compatiability reason, and
that case is not possible in qemu's new interface for internal
snapshot at block device level, but still possible in qemu-img.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unlike savevm, the qmp_transaction interface will not generate
snapshot name automatically, saving trouble to return information
of the new created snapshot.
Although qcow2 support storing multiple snapshots with same name
but different ID, here it will fail when an snapshot with that name
already exist before the operation. Format such as rbd do not support
ID at all, and in most case, it means trouble to user when he faces
multiple snapshots with same name, so ban that case. Request with
empty name will be rejected.
Snapshot ID can't be specified in this interface.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Snapshot creation actually already distinguish id and name since it take
a structured parameter *sn, but delete can't. Later an accurate delete
is needed in qmp_transaction abort and blockdev-snapshot-delete-sync,
so change its prototype. Also *errp is added to tip error, but return
value is kepted to let caller check what kind of error happens. Existing
caller for it are savevm, delvm and qemu-img, they are not impacted by
introducing a new function bdrv_snapshot_delete_by_id_or_name(), which
check the return value and do the operation again.
Before this patch:
For qcow2, it search id first then name to find the one to delete.
For rbd, it search name.
For sheepdog, it does nothing.
After this patch:
For qcow2, logic is the same by call it twice in caller.
For rbd, it always fails in delete with id, but still search for name
in second try, no change to user.
Some code for *errp is based on Pavel's patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To make it clear about id and name in searching, add this API
to distinguish them. Caller can choose to search by id or name,
*errp will be set only for exception.
Some code are modified based on Pavel's patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add one test case for zero cluster expansion on qcow2 version downgrade
in shared L2 tables (i.e., L2 tables with a refcount > 1) and one for
zero expansion on backed clusters in shared L2 tables.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This case will test whether the monitor can receive fd at runtime.
To verify better, additional monitor is created to see if qemu
can handler two monitor instances correctly.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch make use of the compiled scm helper program to transfer
fd via unix socket at runtime.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This program can do a sendmsg call to transfer fd with unix
socket, which is not supported in python2.
The built binary will not be deleted in clean, but it is a
existing issue in ./tests, which should be solved in another
patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implement bdrv_amend_options for compat, size, backing_file, backing_fmt
and lazy_refcounts.
Downgrading images from compat=1.1 to compat=0.10 is achieved through
handling all incompatible flags accordingly, clearing all compatible and
autoclear flags and expanding all zero clusters.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Save the image refcount order in BDRVQcowState. This will be relevant
for future code supporting different refcount orders than four and also
for code that needs to verify a certain refcount order for an opened
image.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add functionality for expanding zero clusters. This is necessary for
downgrading the image version to one without zero cluster support.
For non-backed images, this function may also just discard zero clusters
instead of truly expanding them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function for emptying a cache, i.e., flushing it and marking all
elements invalid.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the "amend" option to qemu-img which allows changing
image options on existing image files. It also adds the generic bdrv
implementation which is basically just a wrapper for the image format
specific function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is a valid case that the read data's size is smaller than the
requested size since there could be files that are smaller than
the minimum block size (For ex. when a VMDK disk descriptor file)
Signed-off-by: Tal Kain <tal.kain@ravellosystems.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
During savevm, the VM state is written to the active L1 of the image and
then a snapshot is taken. After that, the VM state isn't needed any more
in the active L1 and should be discarded. This is implemented by this
patch.
The impact of not discarding the VM state is that a snapshot can never
become smaller than any previous snapshot (because it would be padded
with old VM state), and more importantly that future savevm operations
cause unnecessary COWs (with associated flushes), which makes subsequent
snapshots much slower.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The function will be used internally instead of only being called for
guest discard requests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
pty_chr_timer first calls pty_chr_update_read_handler(), then clears
timer_tag (because it is a one-shot timer). This is the wrong order
though. pty_chr_update_read_handler might re-arm time timer, and the
new timer_tag gets overwitten in that case.
This leads to crashes when unplugging a pty chardev: pty_chr_close
thinks no timer is running -> timer isn't canceled -> pty_chr_timer gets
called with stale CharDevState -> BOOM.
This patch fixes the ordering.
Kill the pointless goto while being at it.
https://bugzilla.redhat.com/show_bug.cgi?id=994414
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this patch adds a coroutine for .bdrv_co_block_status as well as
a generic framework that can be used to build coroutines in block/iscsi.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use deposit32() rather than handcoded shifts/masks to update the
scratch registers. This is cleaner and incidentally avoids a clang
sanitizer complaint ("runtime error: left shift of 255 by 24 places
cannot be represented in type 'int'").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use sextract32() for doing sign-extension rather than rolling
our own implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi_bus_legacy_add_drive() creates either a scsi-disk or a
scsi-generic device. It sets property "serial" to argument serial
unless null. Crashes with scsi-generic, because it doesn't have such
the property.
Only usb_msd_initfn_storage() passes non-null serial. Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -S -usb \
-drive if=none,file=/dev/sg1,id=usb-drv0 \
-device usb-storage,id=usb-msd0,drive=usb-drv0,serial=123
qemu-system-x86_64: -device usb-storage,id=usb-msd0,drive=usb-drv0,serial=123: Property '.serial' not found
Aborted (core dumped)
Fix by handling exactly like "removable": set the property only when
it exists.
Cc: qemu-stable@nongnu.org
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's the abstract base of virtio-scsi-device and vhost-scsi.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment the guest kernel issues two types of task management
requests to the hypervisor - task about and lun reset. This adds
handling for these tasks. As spapr-vscsi starts calling scsi_req_cancel(),
free_request callback was implemented.
As virtio-vscsi, spapr-vscsi does not handle CLEAR_ACA either as CDB
control byte does not seem to be used at all so NACA bit is not
set to the guest so the guest has no good reason to call CLEAR_ACA task.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[Fix choice of UCSOLCNT vs. SCSOLCNT. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The UUID is unique even across multiple hosts, thus it is
better than a VM name even if it is less user-friendly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM queue:
* aarch64 preparation patchset (excluding the defconfigs, so this
doesn't actually enable the new targets yet)
* minor bugfixes and cleanups
* disable "-cpu any" in system emulation mode
* fix ARMv7M stack alignment on reset
# gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Alexander Graf (13) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130910: (28 commits)
configure: Add handling code for AArch64 targets
linux-user: Add AArch64 support
linux-user: Allow targets to specify a minimum uname release
linux-user: Add AArch64 termbits.h definitions
linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64
linux-user: Make sure NWFPE code is 32 bit ARM only
linux-user: Add signal handling for AArch64
linux-user: Fix up AArch64 syscall handlers
linux-user: Add syscall number definitions for AArch64
linux-user: Add cpu loop for AArch64
linux-user: Don't treat AArch64 cpu names specially
target-arm: Add AArch64 gdbstub support
target-arm: Add AArch64 translation stub
target-arm: Prepare translation for AArch64 code
target-arm: Disable 32 bit CPUs in 64 bit linux-user builds
target-arm: Add new AArch64CPUInfo base class and subclasses
target-arm: Pass DisasContext* to gen_set_pc_im()
target-arm: Fix target_ulong/uint32_t confusions
target-arm: Export cpu_env
target-arm: Extract the disas struct to a header file
...
Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Gerd Hoffmann (2) and Christophe Fergeau (1)
# Via Gerd Hoffmann
* spice/spice.v73:
qxl: fix local renderer
qxl: trace io port name
spice-core: Use g_strdup_printf instead of snprintf
Message-id: 1378807572-27902-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Gerd Hoffmann (2) and Miroslav Rezanina (2)
# Via Gerd Hoffmann
* kraxel/usb.89:
ehci: save device pointer in EHCIState
Remove dev-bluetooth.c dependency from vl.c
Preparation for usb-bt-dongle conditional build
usb: sanity check setup_index+setup_len in post_load
Message-id: 1378806073-25197-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Tomoki Sekiyama (10) and Paul Burton (1)
# Via Michael Roth
* mdroth/qga-pull-2013-9-9:
QMP/qemu-ga-client: Make timeout longer for guest-fsfreeze-freeze command
qemu-ga: Install Windows VSS provider on `qemu-ga -s install'
qemu-ga: Call Windows VSS requester in fsfreeze command handler
qemu-ga: Add Windows VSS provider and requester as DLL
error: Add error_set_win32 and error_setg_win32
qemu-ga: Add configure options to specify path to Windows/VSS SDK
Add a script to extract VSS SDK headers on POSIX system
checkpatch.pl: Check .cpp files
Add c++ keywords to QAPI helper script
configure: Support configuring C++ compiler
mips_malta: support up to 2GiB RAM
Message-id: 1378755701-2051-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Paolo Bonzini (21) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
qemu-iotests: Fixed test case 026
qemu-iotests: Whitespace cleanup
dataplane: Fix startup race.
block: look for zero blocks in bs->file
block: add default get_block_status implementation for protocols
raw-posix: report unwritten extents as zero
raw-posix: return get_block_status data and flags
docs, qapi: document qemu-img map
qemu-img: add a "map" subcommand
block: return BDRV_BLOCK_ZERO past end of backing file
block: use bdrv_has_zero_init to return BDRV_BLOCK_ZERO
block: return get_block_status data and flags for formats
block: define get_block_status return value
block: introduce bdrv_get_block_status API
block: make bdrv_has_zero_init return false for copy-on-write-images
qemu-img: always probe the input image for allocated sectors
block: expect errors from bdrv_co_is_allocated
block: remove bdrv_is_allocated_above/bdrv_co_is_allocated_above distinction
block: do not use ->total_sectors in bdrv_co_is_allocated
block: make bdrv_co_is_allocated static
...
Message-id: 1378481953-23099-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Brad Smith (2) and others
# Via Stefan Hajnoczi
* stefanha/net:
ne2000: mark I/O as LITTLE_ENDIAN
vmxnet3: Eliminate __packed redefined warning
e1000: add interrupt mitigation support
net: Rename send_queue to incoming_queue
tap: Use numbered tap/tun devices on all *BSD OS's
Message-id: 1378481624-20964-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
For newer target architectures, glibc can be picky about the kernel
version: for example, it will not run on an aarch64 system unless
the kernel reports itself as at least 3.8.0. Accommodate this by
enhancing the existing support for faking the kernel version so
that each target can optionally specify a minimum version: if
the user doesn't force a specific fake version then we will override
with the minimum required version only if the real host kernel
version is insufficient.
Use this facility to let aarch64 report a minimum of 3.8.0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-21-git-send-email-peter.maydell@linaro.org
On ARM, linux-user emulation includes NWFPE support for emulating the
ancient FPA floating point coprocessor. This has long since been
superseded by VFP and is only required for legacy binaries. The
AArch64 linux-user target doesn't compile in NWFPE support, so make
sure the relevant code is protected by suitable ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-18-git-send-email-peter.maydell@linaro.org
Add the main linux-user cpu loop for AArch64. Since AArch64
has a different system call interface, doesn't need to worry
about FPA emulation and may in the future keep the prefetch/data
abort information in different system registers, it's simplest
just to use a completely separate loop from the 32 bit ARM
target, rather than peppering it with ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-14-git-send-email-peter.maydell@linaro.org
We should translate AArch64 mode separately from AArch32 mode. In AArch64 mode,
registers look vastly different, instruction encoding is completely different,
basically the system turns into a different machine.
So let's do a simple if() in translate.c to decide whether we can handle the
current code in the legacy AArch32 code or in the new AArch64 code.
So far, the translation always complains about unallocated instructions. There
is no emulator functionality in this patch!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-11-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-5-git-send-email-john.rigby@linaro.org
[PMM:
* provide no-op versions of a64 functions ifndef TARGET_AARCH64;
this lets us avoid #ifdefs in translate.c
* insert the missing call to disas_a64_insn()
* stash the insn in the DisasContext rather than reloading it in
real_unallocated_encoding()
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds all the prerequisites for AArch64 support that didn't
fit into split up patches. It extends important bits in the core cpu
headers to also take AArch64 mode into account.
Add new ARM_TBFLAG_AARCH64_STATE translation buffer flag
indicate an ARMv8 cpu running in aarch64 mode vs aarch32 mode.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-10-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-4-git-send-email-john.rigby@linaro.org
[PMM:
* rearranged tbflags so AArch64? is bit 31 and if it is set then
30..0 are freely available for whatever makes most sense for that mode
* added version bump since we change VFP migration state
* added a comment about how VFP/Neon register state works
* physical address space is 48 bits, not 64
* added ARM_FEATURE_AARCH64 flag to identify 64-bit capable CPUs
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AArch32 code (ie traditional 32 bit world) expects to be
able to pass a vaddr in a TCGv_i32. However when QEMU is
compiled with TARGET_LONG_BITS=32 the TCG load/store
functions take a TCGv_i64. Abstract out load/store with
a 32 bit vaddr so we have a place to put the zero extension
of the vaddr and the extension/truncation of the data value.
Apart from the function definitions most of this patch is
a simple s/tcg_gen_qemu_/gen_aa32_/.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-3-git-send-email-peter.maydell@linaro.org
The ARM EABI specifies that 64 bit integers should be
8 aligned; remove our incorrect setting of 4 alignment.
This has no actual effect since it only set the alignment
for the 'abi_ullong' and 'abi_llong' types, which are used
only inside code which is MIPS-specific, but it will
avoid problems later if we use the types elsewhere.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clarify a comment about the ID register value presented by
the PL110 variant present on the VersatilePB board (based
on testing what the actual hardware does), to indicate that
this is not an error in our emulation, and to remove an #if-0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the initial SP is loaded from the vector table on ARMv7M systems the two
least significant bits are ignored as the stack is always aligned at a four byte
boundary (see ARM DDI 0403C, B1.4.1 and B1.5.5). So far QEMU did not ignore
these bits leading to a stack alignment inconsitent with real hardware for
binaries that rely on this behaviour. This patch fixes this issue by masking the
two least significant bits when loading the SP.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378286595-27072-1-git-send-email-ottlik@fzi.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Avoid the undefined behaviour of "1 << 31" by using 1U to make
the shift be of an unsigned value rather than shifting into the
sign bit of a signed integer. For consistency, we make all the
CPSR_* constants unsigned, though the only one which triggers
undefined behaviour is CPSR_N.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1378391908-22137-3-git-send-email-peter.maydell@linaro.org
In the decode of ARM B and BL insns, swap the order of the
"append 2 implicit zeros to imm24" and the sign extend, and
use the new sextract32() utility function to do the latter.
This avoids a direct dependency on the undefined C behaviour
of shifting into the sign bit of an integer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1378391908-22137-2-git-send-email-peter.maydell@linaro.org
Make the 'any' CPU for target-arm available only in linux-user mode.
The ARM target provides a CPU named "any", which turns on support for
all user-level instruction set extensions we know about. This is
intended for linux-user emulation mode, where it is the default CPU type.
It makes no sense to try to use this for system emulation, since we don't
initialize it with any system-level information like feature register
values or implementation specific cp15 registers. (Unsurprisingly, some
boards won't boot at all, though you might get lucky in some cases where
the guest doesn't happen to prod things that aren't there.)
Prevent users from making this command line error by removing the
CPU definition from the softmmu build.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1378213995-12945-1-git-send-email-peter.maydell@linaro.org
Unlike other list types, enum wasn't adding any padding, which caused
a mismatch between the generated struct size and GenericList struct
size. More details in a678e26cbe
This crashed qemu if calling qmp query-tpm-types for example, which
upsets libvirt capabilities probing. Reproducer on i686:
(sleep 5; printf '{"execute":"qmp_capabilities"}\n{"execute":"query-tpm-types"}\n') | ./i386-softmmu/qemu-system-i386 -S -nodefaults -nographic -M none -qmp stdio
https://bugs.launchpad.net/qemu/+bug/1219207
Cc: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Use usb_legacy_register handling to create bt-dongle device and remove code
dependency from vl.c so CONFIG_USB_BLUETOOTH can be disabled.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To allow disable usb-bt-dongle device using CONFIG_BLUETOOTH option, some of
functions in vl.c file has to be made accessible in dev-bluetooth.c. This is
pure code moving.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The local spice renderer assumes the primary surface is located at the
start of the "ram" bar. This used to be a requirement in qxl hardware
revision 1. In revision 2+ this is relaxed. Nevertheless guest drivers
continued to use the traditional location, for historical and backward
compatibility reasons. The qxl kms driver doesn't though as it depends
on qxl revision 4+ anyway.
Result is that local rendering is hosed for recent linux guests, you'll
get pixel garbage with non-spice ui (gtk, sdl, vnc) and when doing
screendumps. Fix that by doing a proper mapping of the guest-specified
memory location.
https://bugzilla.redhat.com/show_bug.cgi?id=948717
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Several places in spice-core.c were using either g_malloc+snprintf
or snprintf+g_strdup to achieve the same result as g_strdup_printf.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
guest-fsfreeze-freeze command can take longer than 3 seconds when heavy
disk I/O is running. To avoid unexpected timeout, this changes the timeout
to 60 seconds (timeout of pre-commit phase of VSS).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Register QGA VSS provider library into Windows when qemu-ga is installed as
Windows service ('-s install' option). It is deregistered when the service
is uninstalled ('-s uninstall' option).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Support guest-fsfreeze-freeze and guest-fsfreeze-thaw commands for Windows
guests. When fsfreeze command is issued, it calls the VSS requester to
freeze filesystems and applications. On thaw command, it again tells the VSS
requester to thaw them.
This also adds calling of initialize functions for the VSS requester.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Adds VSS provider and requester as a qga-vss.dll, which is loaded by
Windows VSS service as well as by qemu-ga.
"provider.cpp" implements a basic stub of a software VSS provider.
Currently, this module only relays a frozen event from VSS service to the
agent, and thaw event from the agent to VSS service, to block VSS process
to keep the system frozen while snapshots are taken at the host.
To register the provider to the guest system as COM+ application, the type
library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl),
VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also
adds pre-compiled .tlb file in the repository in order to enable
cross-compile qemu-ga.exe for Windows with VSS support.
"requester.cpp" provides the VSS requester to kick the VSS snapshot process.
Qemu-ga.exe works without the DLL, although fsfreeze features are disabled.
These functions are only supported in Windows 2003 or later. In older
systems, fsfreeze features are disabled.
In several versions of Windows which don't support attribute
VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error
VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error.
To solve this fundamentally, we need a framework to handle mount writable
snapshot on guests, which is required by VSS auto-recovery feature
(cleanup phase after a snapshot is taken).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These functions help maintaining homogeneous formatting of error messages
with Windows error code and description (generated by
g_win32_error_message()).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
To enable VSS support in qemu-ga for Windows, header files included in
VSS SDK are required.
The VSS support is enabled by the configure option like below:
./configure --with-vss-sdk="/path/to/VSS SDK"
If the path is omitted, it tries to search the headers from default paths
and VSS support is enabled only if the SDK is found.
VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is
specified.
VSS SDK is available from:
http://www.microsoft.com/en-us/download/details.aspx?id=23490
To cross-compile using mingw, you need to setup the SDK on Windows
environments to extract headers. You can also extract the SDK headers on
POSIX environments using scripts/extract-vss-headers and msitools.
In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to
specify path to Windows SDK, which may be used for native-compile of .tlb
file of qemu-ga VSS provider. However, this is usually unnecessary because
pre-compiled .tlb file is included.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Enable checkpatch.pl to apply the same checks as C source files for
C++ files with .cpp extensions. It also adds some exceptions for C++
sources to suppress errors for:
- <> used in C++ template arguments (e.g. template <class T>)
- :: used to represent namespaces (e.g. SomeClass::method())
- : used in class declaration (e.g. class T : public Super)
- ~ used in destructor method name (e.g. T::~T())
- spacing around 'catch' (e.g. catch (...))
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add configuration for C++ compiler in configure and Makefiles.
The C++ compiler is choosed as following:
- ${CXX}, if it is specified.
- ${cross_prefix}g++, if ${cross_prefix} is specified.
- Otherwise, c++ is used.
Currently, usage of C++ language is only for access to Windows VSS
using COM+ services in qemu-guest-agent for Windows.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Micael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
A Malta board can support up to 2GiB of RAM. Since the unmapped kseg0/1
regions are only 512MiB large & the latter 256MiB of those are taken up
by the IO region, access to RAM beyond 256MiB must be done through a
mapped region. In the case of a Linux guest this means we need to use
highmem.
The mainline Linux kernel does not support highmem for Malta at this
time, however this can be tested using the linux-mti-3.8 kernel branch
available from:
git://git.linux-mips.org/pub/scm/linux-mti.git
You should be able to boot a Linux kernel built from the linux-mti-3.8
branch, with CONFIG_HIGHMEM enabled, using 2GiB RAM by passing "-m 2G"
to QEMU and appending the following kernel parameters:
mem=256m@0x0 mem=256m@0x90000000 mem=1536m@0x20000000
Note that the upper half of the physical address space of a Malta
mirrors the lower half (hence the 2GiB limit) except that the IO region
(0x10000000-0x1fffffff in the lower half) is not mirrored in the upper
half. That is, physical addresses 0x90000000-0x9fffffff access RAM
rather than the IO region, resulting in a physical address space
resembling the following:
0x00000000 -> 0x0fffffff RAM
0x10000000 -> 0x1fffffff I/O
0x20000000 -> 0x7fffffff RAM
0x80000000 -> 0x8fffffff RAM (mirror of 0x00000000 -> 0x0fffffff)
0x90000000 -> 0x9fffffff RAM
0xa0000000 -> 0xffffffff RAM (mirror of 0x20000000 -> 0x7fffffff)
The second mem parameter provided to the kernel above accesses the
second 256MiB of RAM through the upper half of the physical address
space, making use of the aliasing described above in order to avoid
the IO region and use the whole 2GiB RAM.
The memory setup may be seen as 'backwards' in this commit since the
'real' memory is mapped in the upper half of the physical address space
and the lower half contains the aliases. On real hardware it would be
typical to see the upper half of the physical address space as the alias
since the bus addresses generated match the lower half of the physical
address space. However since the memory accessible in the upper half of
the physical address space is uninterrupted by the IO region it is
easiest to map the RAM as a whole there, and functionally it makes no
difference to the target code.
Due to the requirements of accessing the second 256MiB of RAM through
a mapping to the upper half of the physical address space it is usual
for the bootloader to indicate a maximum of 256MiB memory to a kernel.
This allows kernels which do not support such access to boot on systems
with more than 256MiB of RAM. It is also the behaviour assumed by Linux.
QEMUs small generated bootloader is modified to provide this behaviour.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that the memory subsystem is propagating the endianness correctly,
the ne2000 device should have its I/O ports marked as LITTLE_ENDIAN, as
PCI devices are little endian.
This makes the ne2000 NIC to work again on PowerPC.
Cc: qemu-stable@nongnu.org
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This eliminates a warning about __packed being redefined as exposed by the
vmxnet3 code. __packed is not used anywhere in the vmxnet3 code.
CC hw/net/vmxnet3.o
In file included from hw/net/vmxnet3.c:29:
hw/net/vmxnet3.h:37:1: warning: "__packed" redefined
In file included from /usr/include/stdlib.h:38,
from /buildbot-qemu/default_openbsd_current/build/include/qemu-common.h:26,
from /buildbot-qemu/default_openbsd_current/build/include/hw/hw.h:5,
from hw/net/vmxnet3.c:18:
/usr/include/sys/cdefs.h:209:1: warning: this is the location of the previous definition
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch partially implements the e1000 interrupt mitigation mechanisms.
Using a single QEMUTimer, it emulates the ITR register (which is the newer
mitigation register, recommended by Intel) and approximately emulates
RADV and TADV registers. TIDV and RDTR register functionalities are not
emulated (RDTR is only used to validate RADV, according to the e1000 specs).
RADV, TADV, TIDV and RDTR registers make up the older e1000 mitigation
mechanism and would need a timer each to be completely emulated. However,
a single timer has been used in order to reach a good compromise between
emulation accuracy and simplicity/efficiency.
The implemented mechanism can be enabled/disabled specifying the command
line e1000-specific boolean parameter "mitigation", e.g.
qemu-system-x86_64 -device e1000,mitigation=on,... ...
For more information, see the Software developer's manual at
http://download.intel.com/design/network/manuals/8254x_GBe_SDM.pdf.
Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de> (for pc-* machines)
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Each networking client has a queue for packets that could not yet be
delivered to that client. Calling this queue "send_queue" is highly
confusing as it has nothing to to with packets send from this client but
to it. Avoid this confusing by renaming it to "incoming_queue".
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following patch simplifies the *BSD tap/tun code and makes use of numbered
tap/tun interfaces on all *BSD OS's. NetBSD has a patch in their pkgsrc tree
to make use of this feature and DragonFly also supports this as well.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The reference output for test case 026 hasn't been updated in a long
time and it's one of the "known failing" cases. This patch updates the
reference output so that unintentional changes can be reliably detected
again.
The problem with this test case is that it produces different output
depending on whether -nocache is used or not. The solution of this patch
is to actually have two different reference outputs. If nnn.out.nocache
exists, it is used as the reference output for -nocache; otherwise,
nnn.out stays valid for both cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These scripts used to have a four characters indentation, with eight
consecutive spaces converted into a tab. Convert everything into spaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Avoid trying to setup dataplane again if dataplane setup is already in
progress. This may happen if an eventfd is triggered during setup.
I saw this occasionally with an experimental s390 irqfd implementation:
virtio_blk_handle_output
-> virtio_blk_data_plane_start
-> virtio_ccw_set_host_notifier
...
-> virtio_queue_set_host_notifier_fd_handler
-> virtio_queue_host_notifier_read
-> virtio_queue_notify_vq
-> virtio_blk_handle_output
-> virtio_blk_data_plane_start
-> vring_setup
-> hostmem_init
-> memory_listener_register
-> BOOM
As virtio-ccw tries to follow what virtio-pci does, it might be triggerable
for other platforms as well.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Protocols return raw data, so you can assume the offsets to pass
through unchanged.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Eric Blake also requested including the output in qapi-schema.json,
so that it is published through the introspection mechanism.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This command dumps the metadata of an entire chain, in either tabular or JSON
format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the sectors are unallocated and we are past the end of the
backing file, they will read as zero.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alternatively, this could use a "discard zeroes data" flag returned
by bdrv_get_info.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define the return value of get_block_status. Bits 0, 1, 2 and 9-62
are valid; bit 63 (the sign bit) is reserved for errors. Bits 3-8
are left for future extensions.
The return code is compatible with the old is_allocated API: if a driver
only returns 0 or 1 (aka BDRV_BLOCK_DATA) like is_allocated used to,
clients of is_allocated will not have any change in behavior. Still,
we will return more precise information in the next patches and the
new definition of bdrv_is_allocated is already prepared for this.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For now, bdrv_get_block_status is just another name for bdrv_is_allocated.
The next patches will add more flags.
This also touches all block drivers with a mostly mechanical rename. The
sole exception is cow; because it calls cow_co_is_allocated from the read
code, we keep that function and make cow_co_get_block_status a wrapper.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img convert can assume "that sectors which are unallocated in the
input image are present in both the output's and input's base images".
However it is only doing this if the output image returns true for
bdrv_has_zero_init(). Testing bdrv_has_zero_init() does not make much
sense if the output image is copy-on-write, because a copy-on-write
image is never initialized to zero (it is initialized to the content
of the backing file).
There is nothing here that makes has_zero_init images special. The
input and output must be equal for the operation to make sense, and
that's it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some bdrv_is_allocated callers do not expect errors, but the fallback
in qcow2.c might make other callers trip on assertion failures or
infinite loops.
Fix the callers to always look for errors.
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that bdrv_is_allocated detects coroutine context, the two can
use the same code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is more robust when the device has removable media.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_is_allocated can detect coroutine context and go through a fast
path, similar to other block layer functions.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a BlockDriverState is growable, after every write we need to
check if bs->total_sectors might have changed. With this change,
bdrv_getlength does not need anymore a system call.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As we change bdrv_is_allocated to gather more information from bs and
bs->file, it will become a bit slower. It is still appropriate for online
jobs, but not for reads/writes. Call the internal function instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not do two reads for each sector; load each sector of the bitmap
and use bitmap operations to process it.
Writes are still dog slow!
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Block jobs used drive_get_ref(drive_get_by_blockdev(bs)) to avoid BDS
being deleted. Now we have BDS reference count, and block jobs don't
care about dinfo, so replace them to get cleaner code. It is also the
safe way when BDS has no drive info.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Previously, nbd calls drive_get_ref() on the drive of bs. A BDS doesn't
always have associated dinfo, which nbd doesn't care either. We already
have BDS ref count, so use it to make it safe for a BDS w/o blockdev.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We call bdrv_attach_dev when initializing whether or not bs is created
locally, so call bdrv_detach_dev and let the refcnt handle the
lifecycle.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
block-migration.c does not actually use DriveInfo anywhere. Hence it's
safe to drive ref code, we really only care about referencing BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.
This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce bdrv_ref/bdrv_unref to manage the lifecycle of
BlockDriverState. They are unused for now but will used to replace
bdrv_delete() later.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
BlockDriverState structure needs bdrv_new() to initialize refcnt, don't
allocate a local structure variable and memset to 0, becasue with coming
refcnt implementation, bdrv_unref will crash if bs->refcnt not
initialized to 1.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
we need bdrv_new() to properly initialize BDS, don't allocate memory
manually.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
tests/test-aio.c used pipe2 which is Linux only. Use qemu_pipe
and qemu_set_nonblock for portabillity. Addition of O_CLOEXEC
is a harmless bonus.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU failed to open host devices like \\.\PhysicalDrive0 (first hard disk)
since some time (commit 8a79380b8ef1b02d2abd705dd026a18863b09020?).
Those devices use hdev_open which did not use the latest API for options.
This resulted in a fatal runtime error:
Block protocol 'host_device' doesn't support the option 'filename'
Duplicate code from raw_open to fix this.
Cc: qemu-stable@nongnu.org
Reported-by: David Brenner <david.brenner3@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a -n option to skip volume creation on qemu-img convert.
This is useful for targets such as rbd / ceph, where the
target volume may already exist; we cannot always rely on
qemu-img convert to create the image, as dependent on the
output format, there may be parameters which are not possible
to specify through the qemu-img convert command line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The moved OFLAG_COPIED check in qcow2_check_refcounts results in a
different output from test 039 (mismatches are now found after the
general refcount check (as far as any remain)). This patch adjusts the
expected test result accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This feature can be used in case where users are avoiding the iops limit by
doing jumbo I/Os hammering the storage backend.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The max parameter of the leaky bucket throttling algorithm can be used to
allow the guest to do bursts.
The max value is a pool of I/O that the guest can use without being throttled
at all. Throttling is triggered once this pool is empty.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement the continuous leaky bucket algorithm devised on IRC as a separate
module.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Jan Kiszka (2) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
exec: do tcg_commit only when tcg_enabled
Revert "memory: Return -1 again on reads from unsigned regions"
memory: Provide separate handling of unassigned io ports accesses
exec: check offset_within_address_space for register subpage
exec: fix writing to MMIO area with non-power-of-two length
Message-id: 1378401455-583-1-git-send-email-pbonzini@redhat.com
Accesses to unassigned io ports shall return -1 on read and be ignored
on write. Ensure these properties via dedicated ops, decoupling us from
the memory core's handling of unassigned accesses.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The problem is introduced by commit 2332616 (exec: Support 64-bit
operations in address_space_rw, 2013-07-08). Before that commit,
memory_access_size would only return 1/2/4.
Since alignment is already handled above, reduce l to the largest
power of two that is smaller than l.
Cc: qemu-stable@nongnu.org
Reported-by: Oleksii Shevchuk <alxchk@gmail.com>
Tested-by: Oleksii Shevchuk <alxchk@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a frontend device releases the chardev (via unplug), the chr handlers
are set to NULL via qdev's exit callbacks invoking
qemu_chr_add_handlers(). If the chardev had a pending operation, a
callback will be invoked, which will try to access data in the
just-released frontend, causing a segfault.
Ensure the callbacks are disabled when frontends release chardevs.
This was seen when a virtio-serial port was unplugged when heavy
guest->host IO was in progress (causing a callback to be registered).
In the window in which the throttling was active, unplugging ports
caused a qemu segfault.
https://bugzilla.redhat.com/show_bug.cgi?id=985205
CC: <qemu-stable@nongnu.org>
Reported-by: Sibiao Luo <sluo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
All the backends implement an io watcher tag for callbacks. Move it to
CharDriverState from each backend's struct to make accessing the tag from
backend-neutral functions easier.
This will be used later to cancel a callback on chardev detach from a
frontend.
CC: <qemu-stable@nongnu.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
QOM CPUState refactorings / X86CPU
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info
# gpg: Signature made Tue 03 Sep 2013 10:59:22 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (3) and Eduardo Habkost (1)
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
target-i386: Use #defines instead of magic numbers for CPUID cache info
cpu: Replace qemu_for_each_cpu()
cpu: Use QTAILQ for CPU list
a15mpcore: Use qemu_get_cpu() for generic timers
# By Stefan Weil (6) and others
# Via Michael Tokarev
* mjt/trivial-patches:
aio / timers: use g_usleep() not sleep()
adlib: sort offsets in portio registration
qmp: fix integer usage in examples
tci: Remove function tcg_out64 (fix broken build)
target-arm: Report unimplemented opcodes (LOG_UNIMP)
pflash_cfi02.c: fix debug macro
configure: Remove unneeded redirections of stderr (pkg-config --exists)
configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)
configure: Don't write .pyc files by default (python -B)
curl: qemu_bh_new() can never return NULL
slirp/arp_table.c: Avoid shifting into sign bit of signed integers
configure: disable clang -Wstring-plus-int warning
rdma: silly ipv6 bugfix
misc: Fix some typos in names and comments
slirp: Port redirection option behave differently on Linux and Windows
Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio_pci: fix level interrupts with irqfd
pc: reduce duplication, fix PIIX descriptions
hw: Clean up bogus default boot order
pci: add config space access traces
pc: fix regression for 64 bit PCI memory
pci: Introduce helper to retrieve a PCI device's DMA address space
Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
QOM device refactorings
* Fix QOM and ISA documentation errors
* Extend object_initialize() et al. to check the instance size
# gpg: Signature made Fri 30 Aug 2013 02:19:48 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (14) and others
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony:
isa: Fix documentation of isa_register_portio_list()
qom: Assert instance size in object_initialize_with_type()
qom: Pass available size to object_initialize()
qdev: Pass size to qbus_create_inplace()
virtio-mmio: Pass size to virtio_mmio_bus_new()
virtio-ccw: Pass size to virtio_ccw_bus_new()
s390-virtio-bus: Pass size to virtio_s390_bus_new()
virtio-pci: Pass size to virtio_pci_bus_new()
usb: Pass size to usb_bus_new()
scsi: Pass size to scsi_bus_new()
pci: Pass size to pci_bus_new_inplace()
ide: Pass size to ide_bus_new()
ipack: Pass size to ipack_bus_new_inplace()
intel-hda: Pass size to hda_codec_bus_init()
qom: Fix object_initialize_with_type() argument name in documentation
virtio: Remove unnecessary OBJECT() casts
object: Fix typo in qom/object.h
This is an attempt to make the CPUID cache topology code clearer, by
replacing the magic numbers in the code with #defines, and moving all
the cache information to the same place in the file.
I took care of comparing the assembly output of compiling
target-i386/cpu.c before and after applying this change, to make sure
not a single bit was changed on cpu_x86_cpuid() before and after
applying this patch (unfortunately I had to manually check existing
differences, because of __LINE__ expansions on
object_class_dynamic_cast_assert() calls).
This even keeps the code bug-compatible with the previous version: today
the cache information returned on AMD cache information leaves (CPUID
0x80000005 & 0x80000006) do not match the information returned on CPUID
leaves 2 and 4. The L2 cache information on CPUID leaf 2 also doesn't
match the information on CPUID leaf 2. The new constants should make it
easier to eventually fix those inconsistencies. All inconsistencies I
have found are documented in code comments.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It was introduced to loop over CPUs from target-independent code, but
since commit 182735efaf target-independent
CPUState is used.
A loop can be considered more efficient than function calls in a loop,
and CPU_FOREACH() hides implementation details just as well, so use that
instead.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This simplifies the loop and aids with refactoring of CPU list.
Requested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* 'tcg-next' of git://github.com/rth7680/qemu: (29 commits)
tcg-i386: Make use of zero-extended memory helper routines
tcg: Introduce zero and sign-extended versions of load helpers
exec: Split softmmu_defs.h
target: Include softmmu_exec.h where forgotten
exec: Rename USUFFIX to LSUFFIX
tcg-i386: Don't perform GETPC adjustment in TCG code
exec: Reorganize the GETRA/GETPC macros
configure: Allow x32 as a host
tcg-i386: Adjust tcg_out_tlb_load for x32
tcg-i386: Use intptr_t appropriately
tcg: Fix jit debug for x32
tcg: Use appropriate types in tcg_reg_alloc_call
tcg: Change tcg_out_ld/st offset to intptr_t
tcg: Change tcg_gen_exit_tb argument to uintptr_t
tcg: Use uintptr_t in TCGHelperInfo
tcg: Change relocation offsets to intptr_t
tcg: Change memory offsets to intptr_t
tcg: Change frame pointer offsets to intptr_t
tcg: Define TCG_ptr properly
tcg: Define TCG_TYPE_PTR properly
...
* 'ppc-for-upstream' of git://github.com/agraf/qemu:
PPC: spapr: iommu: rework traces
spapr: add "stop-self" RTAS call required to support hot CPU unplug
PPC: KVM: Compile fix for qemu_notify_event
pseries: Add H_SET_MODE hcall to change guest exception endianness
xics: move registration of global state to realize()
spapr-pci: rework MSI/MSIX
target-ppc: Use #define instead of opencoding SLB valid bit
spapr-pci: fix config space access to support bridges
target-ppc: fix bit extraction for FPBF and FPL
ppc405_boards: Don't enforce presence of firmware for qtest
ppc405_uc: Disable debug output
ppc405_boards: Disable debug output
ppc: virtex_ml507: QEMU_OPTION_dtb support for this machine.
disas/ppc.c: Fix little endian disassembly
target-ppc: POWER7 supports the MSR_LE bit
target-ppc: USE LPCR_ILE to control exception endian on POWER7
pseries: Fix stalls on hypervisor virtual console
PPC: E500: Generate device tree on reset
On MIPS ext8s and ext16s ops are implemented with a dedicated
instruction only on MIPS32R2, otherwise the same kind of implementation
than at TCG level (shift left followed by shift right) is used.
Change that by only implementing the ext8s and ext16s ops on MIPS32R2 so
that optimizations can be done by the optimizer. Use an inline version to
avoid having to test again for MIPS32R2 instructions. Keep the shift
implementation for the ld/st routines.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use an inline version for the bswap16 and bswap32 ops to avoid
testing for MIPS32R2 instructions availability, as these ops are
only available in that case.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that TCG supports enabling and disabling ops at runtime, it's
possible to detect the available host instructions at runtime, and
enable the corresponding ops accordingly.
Unfortunately it's not easy to probe for available instructions on
MIPS, the information is partially available in /proc/cpuinfo, and
not available in AUXV. This patch therefore probes for the instructions
by trying to execute them and by catching a possible SIGILL signal.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For 8 and 16-bit unsigned loads, rely on the zero-extension
from the helper and use a smaller 32-bit move insn.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The _cmmu helpers can be moved to exec-all.h. The helpers that are
used from TCG will shortly need access to tcg_target_long so move
their declarations into tcg.h.
This requires minor include adjustments to all TCG backends.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Several targets forgot to include softmmu_exec.h, which would
break them with a header cleanup to follow.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In a following patch, there will be confusion between multiple "unsigned"
suffixes; rename this one so as to imply "load".
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since we now perform it inside the helper, no need to do it here.
This also lets us perform a tail-call from the store slow path to
the helper.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Always define GETRA; use __builtin_extract_return_addr, rather than
having a special case for s390. Split GETPC_ADJ out of GETPC; use 2
universally, rather than having a special case for arm.
Rename GETPC_LDST to GETRA_LDST to indicate that it does not
contain the GETPC_ADJ value. Likewise with GETPC_EXT to GETRA_EXT.
Perform the GETPC_ADJ adjustment inside helper_ret_ld/st. This will
allow backends to pass along the "true" return address rather than
the massaged GETPC value. In the meantime, double application of
GETPC_ADJ does not hurt, since the call insn in all ISAs is at least
4 bytes long.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There are several hosts for which it would be useful to use the
available 64-bit registers in a 32-bit pointer environment.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since FMT_timeval unconditionally uses %ld for both tv_sec and tv_usec,
and already casts tv_usec to long, also cast tv_sec to long.
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Using these instead of mulu2 and muls2 lets us avoid having to argument
overlap analysis in the backend. Normal register allocation will DTRT.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
With the optimization in tcg_liveness_analysis,
we can avoid the MFLO when it is unused.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use them in places where mulu2 and muls2 are used.
Optimize mulx2 with dead low part to mulxh.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This reverts commit a309ee6e0a.
This isn't in line with the usb specification and adds regressions,
win7 fails to drive the usb hub for example.
Was added because it "solved" the issue of hubs interacting badly
with the xhci host controller. Now with the root cause being fixed
in xhci (commit <FIXME>) we can revert this one.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb3 bulk endpoints with streams are implicitly pipelined now,
so the requests will actually be processed in parallel. Also
allow them to complete out-of-order.
Fixes stalls in the uas driver.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Respect the interval for interrupt endpoints, so we don't finish
transfers as fast as possible but at the rate configured by the guest.
Fixes guest deadlocks triggered by interrupt storms.
Cc:
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A new test on corrupted images with overlapping cluster allocations.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If no corruptions remain after an image repair (and no errors have been
encountered), clear the corrupt flag in qcow2_check.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the refcount of a refcount block is greater than one, we can at least
try to repair that problem by duplicating the affected block.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This converts old style fprintf to traces.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: change patch subject]
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR+ requires two RTAS calls to be supported by the hypervisor in
order to allow hotplugging VCPUs from the guest. The "start-cpu" RTAS
call was already there but "stop-self" was not.
This adds the "stop-self" RTAS call.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The function qemu_notify_event is defined by a header that we don't
include in the PPC KVM code. Include it to get the code building
again.
target-ppc/kvm_ppc.c: In function 'kvmppc_timer_hack':
target-ppc/kvm_ppc.c:26:5: error: implicit declaration of function 'qemu_notify_event' [-Werror=implicit-function-declaration]
target-ppc/kvm_ppc.c:26:5: error: nested extern declaration of 'qemu_notify_event' [-Werror=nested-externs]
Signed-off-by: Alexander Graf <agraf@suse.de>
H_SET_MODE is used for controlling various partition settings. One
of these settings is the endianness a guest takes its exceptions in.
Signed-off-by: Anton Blanchard <anton@samba.org>
[agraf: fix whitespace]
Signed-off-by: Alexander Graf <agraf@suse.de>
Registration of global state belongs into realize so move it there.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On the sPAPR platform a guest allocates MSI/MSIX vectors via RTAS
hypercalls which return global IRQ numbers to a guest so it only
operates with those and never touches MSIMessage.
Therefore MSIMessage handling is completely hidden in QEMU.
Previously every sPAPR PCI host bridge implemented its own MSI window
to catch msi_notify()/msix_notify() calls from QEMU devices (virtio-pci
or vfio) and route them to the guest via qemu_pulse_irq().
MSIMessage used to be encoded as:
.addr - address within the PHB MSI window;
.data - the device index on PHB plus vector number.
The MSI MR write function translated this MSIMessage to a global IRQ
number and called qemu_pulse_irq().
However the total number of IRQs is not really big (at the moment it is
1024 IRQs starting from 4096) and even 16bit data field of MSIMessage
seems to be enough to store an IRQ number there.
This simplifies MSI handling in sPAPR PHB. Specifically, this does:
1. remove a MSI window from a PHB;
2. add a single memory region for all MSIs to sPAPREnvironment
and spapr_pci_msi_init() to initialize it;
3. encode MSIMessage as:
* .addr - a fixed address of SPAPR_PCI_MSI_WINDOW==0x40000000000ULL;
* .data as an IRQ number.
4. change IRQ allocator to align first IRQ number in a block for MSI.
MSI uses lower bits to specify the vector number so the first IRQ has to
be aligned. MSIX does not need any special allocator though.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
spapr-pci config space accessors use find_dev() to find a PCI device.
However find_dev() only searched on a primary bus and did not do
recursive search through secondary buses so config space access was not
possible for devices other that on a primary bus.
This fixed find_dev() by using the PCI API pci_find_device() function.
This effectively enabled pci bridges on spapr.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Bit extraction for the FP BF and L field of the MTFSFI and MTFSF
instructions is wrong and doesn't match the reference manual (which
explain the bit number in big endian format). It has been broken in
commit 7d08d85645.
This patch fixes this, which in turn fixes the problem reported by
Khem Raj about the floor() function of libm.
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
CC: qemu-stable@nongnu.org (1.6)
Signed-off-by: Alexander Graf <agraf@suse.de>
QEMU has 'dtb' option for specifing the device tree file for the kernel.
The patch adds support for this option to the 'virtex_ml507' machine
implementation.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use info->endian to select the endian of the instruction to
be disassembled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On POWER7, LPCR_ILE is used to control what endian guests take
their exceptions in so use it instead of MSR_ILE.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
A number of users are reporting stalls when using the pseries
hypervisor virtual console.
A simple test case is to paste 15 or 17 characters at a time
into the console. Pasting 15 characters at a time works fine
but pasting 17 characters hangs for a random amount of time.
Other activity (network, qemu monitor etc) unblocks it.
If qemu-char tries to send more than 16 characters at once,
vty_can_receive returns false. At this point we have to
wait for the guest to consume that output. Everything is good
so far.
The problem occurs when the the guest does consume the output.
We need to signal back to the qemu-char layer that we are
ready for more input. Without this we block until something
else kicks us (eg network activity).
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Today we generate the device tree once on machine initialization and then
store the finalized blob in memory to reload it on reset.
This is bad for 2 reasons. First we potentially waste a bunch of RAM for no
good reason, as we have all information required to regenerate the device
tree available anyways.
The second reason is even more important. On machine init when we generate
the device tree for the first time, we don't have all of the devices fully
initialized yet. But the device tree needs to potentially walk devices to
put information about them into the device tree.
Move the generation into a reset function. That way we just generate it new
every time we reset, solving both of the above issues.
Signed-off-by: Alexander Graf <agraf@suse.de>
sleep() apparently doesn't exist under mingw. Use g_usleep for
portability.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes the following assert when -device adlib is used:
ioport.c:240: portio_list_add: Assertion `pio->offset >= off_last' failed.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Per the qapi schema, block_set_io_throttle takes most arguments
as ints, not strings.
* qmp-commands.hx (block_set_io_throttle): Use correct type. Fix
whitespace and a copy-paste bug in the process.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit ac26eb69a3 added tcg_out64 to tcg/tcg.c.
tcg/tci/tcg-target.c already had a nearly identical implementation which is
now removed to fix a compiler error.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
These unimplemented opcodes are handled like illegal opcodes, but
they are used in existing code. We should at least report when they
are executed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If PFLASH_DEBUG is enabled then we have some build errors:
hw/block/pflash_cfi02.c: In function ‘pflash_timer’:
hw/block/pflash_cfi02.c:128:5: error: expected ‘)’ before string constant
hw/block/pflash_cfi02.c:128:5: error: too few arguments to function ‘fprintf’
This patch fixes the problem.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Predicate options (--exists, --atleast-version, ...) of pkg-config dont't
print error messages to stderr, so redirecting stderr is not necessary.
Combining a predicate option with --modversion is not necessary for tests.
Instead of testing with --modversion, --exists can be used.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For existing libraries, pkg-config --cflags and pkg-config --libs won't
print error messages to stderr, so redirecting stderr is not necessary.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When a Python script is run, Python normally writes bytecode into a .pyc file.
QEMU's build process uses several Python scripts which are called from
configure or make.
The generated .pyc files take disk space without being of much use, because
those scripts are short, not time critical and only called a few times.
Python's option -B disables writing of .pyc files. QEMU now uses "python -B"
as default, but it is still possible to choose a different call by passing
--python=PYTHON to configure.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Drop error code path which cannot be taken since qemu_bh_new() does not
return NULL.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
"0xf << 28" shifts right into the sign bit, since 0xf is a signed
integer. Use the 'U' suffix to force an unsigned shift to avoid
this undefined behaviour and a clang sanitizer warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some versions of clang will warn about adding integers to strings:
disas/i386.c:4753:23: error: adding 'char' to a string does not append
to the string [-Werror,-Wstring-plus-int]
oappend ("%es:" + intel_syntax);
~~~~~~~^~~~~~~~~~~~~~
disas/i386.c:4753:23: note: use array indexing to silence this warning
oappend ("%es:" + intel_syntax);
^
& [ ]
disas/i386.c uses this idiom to to skip a "%" prefix if using intel
rather than AT&T syntax. This seems like a reasonable thing to do,
and I don't think anybody contributing to QEMU is likely to believe
that '+' is a string concatenation operator in C, so just disable
-Wstring-plus-int.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
My bad - but it's very important for us to warn the user that
IPv6 is broken on RoCE in linux right now, until linux releases
a fixed version.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most typos were found using a modified version of codespell:
accross -> across
issueing -> issuing
TICNT_THRESHHOLD -> TICNT_THRESHOLD
bandwith -> bandwidth
VCARD_7816_PROPIETARY -> VCARD_7816_PROPRIETARY
occured -> occurred
gaurantee -> guarantee
sofware -> software
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
port redirection code uses SO_REUSEADDR socket option before binding to
host port. Behavior of SO_REUSEADDR is different on Windows and Linux.
Relaunching QEMU with same host and guest port redirection values on Linux
throws error but on Windows it does not throw any error.
Problem is discussed in http://lists.gnu.org/archive/html/qemu-devel/2013-04/msg03089.html
Signed-off-by: Taimoor Mirza <tmirza@codesourcery.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
commit 62c96360ae
virtio-pci: fix level interrupts
only helps systems without irqfd: on systems with irqfd support we
passed in flag requesting irqfd even when msix is disabled.
As a result, for level interrupts we didn't install an fd handler so
unmasking an fd had no effect.
Fix this up.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We have a lot of code duplication between machine types,
this increases with each new machine type
and each new field.
This has already introduced a minor bug: description
for pc-1.3 says "Standard PC" while description for
pc-1.4 is "Standard PC (i440FX + PIIX, 1996)"
which makes you think 1.3 is somehow more standard,
or newer, while in fact it's a revision of the same PC.
This patch addresses this issue by using macros, along
the lines used by PC_COMPAT_X_X - only for
non-property options.
The approach can extend to non-PC machine types.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This catches objects initializing beyond allocated memory, e.g.,
when subtypes get extended with instance state of their own.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed on to object_initialize_with_type().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (virtio-ccw)
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to object_initialize().
Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to qbus_create_inplace().
Use DEVICE() cast to avoid a direct parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to qbus_create_inplace().
Use DEVICE() casts instead of direct parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to qbus_create_inplace().
Simplify DEVICE() cast to avoid parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There's no need to cast the first argument of object_initialize()
to Object. Remove these unnecessary casts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There's been a cut-and-paste error, it looks like, in the documentation
in qom/object.h.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Wenchao Xia (15) and Stefan Weil (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
monitor: improve auto complete of "help" for single command in sub group
monitor: allow "help" show message for single command in sub group
monitor: support sub command in auto completion
monitor: refine monitor_find_completion()
monitor: support sub command in help
monitor: refine parse_cmdline()
monitor: code move for parse_cmdline()
monitor: avoid direct use of global variable *mon_cmds
monitor: split off monitor_data_init()
monitor: call sortcmdlist() only one time
monitor: avoid use of global *cur_mon in readline_completion()
monitor: avoid use of global *cur_mon in monitor_find_completion()
monitor: avoid use of global *cur_mon in block_completion_it()
monitor: avoid use of global *cur_mon in file_completion()
monitor: avoid use of global *cur_mon in cmd_completion()
monitor: Add missing attributes to local function
Message-id: 1377865357-6742-1-git-send-email-lcapitulino@redhat.com
This is a set of patches dealing with kdump support for s390x/kvm.
kdump on s390x uses subcode 1 of diagnose 0x308 to put the hardware
in a defined state. This is different from a full reset, since it
does not touch all CPU registers.
These patches define the cpu resets, the subsystem reset a load
function and also wires up the "nmi" command to issue a RESTART
interrupt as defined in the z/Architecture principles of operation.
This allows recent guest kernels with properly setup userspace
to trigger kdump:
- via guest crash
- via nmi from the host
# gpg: Signature made Fri 30 Aug 2013 07:19:18 AM CDT using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found
# By Christian Borntraeger (5) and Eugene (jno) Dvurechenski (2)
# Via Christian Borntraeger
* borntraeger/tags/kdump:
s390: wire up nmi command to raise a RESTART interrupt on S390
s390: Implement load normal reset
s390/cpu: split CPU reset into architectured functions
s390: provide a cpu load normal function
s390: provide I/O subsystem reset
s390/kvm: basic implementation of diagnose 308 subcode 6
s390x/kvm: Fix switch/case indentation for handle_diag
Message-id: 1377810649-47484-1-git-send-email-borntraeger@de.ibm.com
Since the OFLAG_COPIED checks are now executed after the refcounts have
been repaired (if repairing), it is safe to assume that they are correct
but the OFLAG_COPIED flag may be not. Therefore, if its value differs
from what it should be (considering the according refcount), that
discrepancy can be repaired by correctly setting (or clearing that flag.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the OFLAG_COPIED checks out of check_refcounts_l1 and
check_refcounts_l2 and after the actual refcount checks/fixes (since the
refcounts might actually change there).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pre-write overlap check function is now called before most of the
qcow2 writes (aborting it on collision or other error).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Two new functions are added; the first one checks a given range in the
image file for overlaps with metadata (main header, L1 tables, L2
tables, refcount table and blocks).
The second one should be used immediately before writing to the image
file as it calls the first function and, upon collision, marks the
image as corrupt and makes the BDS unusable, thereby preventing
further access.
Both functions take a bitmask argument specifying the structures which
should be checked for overlaps, making it possible to also check
metadata writes against colliding with other structures.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds an incompatible bit indicating corruption to qcow2. Any image
with this bit set may not be written to unless for repairing (and
subsequently clearing the bit if the repair has been successful).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test creates an image with unallocated zero clusters, then creates
a snapshot. Afterwards, there should be neither any errors nor leaks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Account for all cluster types in qcow2_update_snapshot_refcounts;
this prevents this function from updating the refcount of unallocated
zero clusters which effectively led to wrong adjustments of the refcount
of cluster 0 (the main qcow2 header). This in turn resulted in images
with (unallocated) zero clusters having a cluster 0 refcount greater
than one after creating a snapshot.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adds an "assigned" flag to QEMUOptionParameter which is cleared at the
beginning of parse_option_parameters and set on (successful)
set_option_parameter and set_option_parameter_int.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently if gluster AIO callback thread fails to notify the QEMU thread about
AIO completion, we try graceful recovery by marking the disk drive as
inaccessible. This error recovery code is race-prone as found by Asias and
Stefan. However as found out by Paolo, this kind of error is impossible and
hence simplify the code that handles this error recovery.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"Incoming" function prototypes and "outgoing" function calls must match
reality. Implemented using the "struct BlockDriver" definition in
"include/block/block_int.h", and gcc errors & warnings.
v1->v2:
On 08/20/13 09:51, Kevin Wolf wrote:
> Am 18.08.2013 um 16:29 hat Paolo Bonzini geschrieben:
>> Il 16/08/2013 16:15, Laszlo Ersek ha scritto:
>>> +static int raw_reopen_prepare(BDRVReopenState *reopen_state,
>>> + BlockReopenQueue *queue, Error **errp)
>>> {
>>> - return bdrv_reopen_prepare(bs->file);
>>> + BDRVReopenState tmp = *reopen_state;
>>> +
>>> + tmp.bs = tmp.bs->file;
>>> + return bdrv_reopen_prepare(&tmp, queue, errp);
>>> }
>>
>> This should just return zero, my fault.
>
> Which is because bdrv_reopen_queue() already queues bs->file for reopen.
> The simple return 0; implementation is shared by all other format drivers
> that support reopening images.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On 08/05/13 15:03, Paolo Bonzini wrote:
>
> [...]
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*). You
> also need to pass the caller of bdrv_register to block_init.
Fill in the BlockDriver structure with the raw_*() functions that have
been added to "block/raw_bsd.c", in the order the fields are defined in
"include/block/block_int.h".
I needed more explanation / naming examples for registering the driver
than what Paolo gave me, so I copied / adapted from "block/qcow2.c". The
parts I took as basis for modification are blamed on
commit 5efa9d5a8b
Author: Anthony Liguori <aliguori@us.ibm.com>
Date: Sat May 9 17:03:42 2009 -0500
Convert block infrastructure to use new module init functionality
commit 20d97356c9
Author: Blue Swirl <blauwirbel@gmail.com>
Date: Fri Apr 23 20:19:47 2010 +0000
Fix OpenBSD build
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On 08/05/13 15:03, Paolo Bonzini wrote:
>
> [...]
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
Code taken and adapted from "block/qcow2.c", as suggested. The code being
copied/modified is blamed on
commit 20d97356c9
Author: Blue Swirl <blauwirbel@gmail.com>
Date: Fri Apr 23 20:19:47 2010 +0000
Fix OpenBSD build
and
commit 7c80ab3f21
Author: Jes Sorensen <Jes.Sorensen@redhat.com>
Date: Fri Dec 17 16:02:39 2010 +0100
block/qcow2.c: rename qcow_ functions to qcow2_
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On 08/05/13 15:03, Paolo Bonzini wrote:
>
> [...]
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
v1->v2:
On 08/20/13 10:11, Kevin Wolf wrote:
> Am 16.08.2013 um 16:15 hat Laszlo Ersek geschrieben:
>> +static int raw_probe(void)
>> +{
>> + return 1;
>> +}
>
> Maybe add a comment here like "smallest possible positive score so that
> raw is used if and only if no other block driver works".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On 08/05/13 15:03, Paolo Bonzini wrote:
>
> [...]
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function is
> bdrv_create_file.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On 08/05/13 15:03, Paolo Bonzini wrote:
>
> [...]
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above). There are
> 16 functions listed here, you can easily see how this already accounts
> for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also call
> BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The events
> to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The expression "1LL << 63" tries to shift the 1 into the sign bit of a
'long long', which provokes a clang sanitizer warning:
runtime error: left shift of 1 by 63 places cannot be represented in type 'long long'
Use "1ULL << 63" as the definition of QCOW_OFLAG_COPIED instead
to avoid this. For consistency, we also update the other QCOW_OFLAG
definitions to use the ULL suffix rather than LL, though only the
shift by 63 is undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The failing condition is checked immediately before the assertion, so
keeping the assertion is kind of redundant.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By the time that qemu 1.7 will be released, enough time will have passed
since qemu 1.1, which is the first version to understand version 3
images, that changing the default shouldn't hurt many people any more
and the benefits of using the new format outweigh the pain.
qemu-iotests already runs with compat=1.1 by default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There is the 'nmi' command that is used to trigger a guest dump via kdump feature on x86.
s390 uses RESTART interrupt to trigger kdump.
So, this patch provides a mean to use 'nmi' command on s390 to raise RESTART interrupt.
The CPU to receive the RESTART interrupt is the "default" one.
There is an infrastructure to select the "default" CPU using 'cpu' command.
The 'info cpus' command can be used to see which one is the "default".
In order to wire up the RESTART to 'nmi' command we had to:
1. implement the kvm_s390_cpu_restart function by exporting the existing code
2. implement s390_cpu_restart function as kvm-aware wrapper
3. modify the qmp_inject_nmi function to enable (for s390) the scan for
"default" CPU and call s390_cpu_restart for it;
3. fix some messages.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
kdump on s390 uses a load normal reset to bring the system in a defined
state by doing a subsystem reset. The issuing CPUs will have an initial
CPU reset, all other CPUs will have a CPU reset as defined in POP (no
register content will change).
Implement this as architectured.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
s390 provides several CPU resets:
- CPU reset, clears interrupts, stop processing, clears TLB, but does
not touch registers
- initial CPU reset, like CPU reset, but also clears PSW, prefix, FPC,
timer and control registers. It does not touch gprs, fprs and acrs (!)
- Power on reset: the full monty
wire up CPUClass reset to the full monty, but provide the lesser resets
as part of S390CPUClass.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
A new parameter type 'S' is introduced to allow user input any string.
"help info block" works normal now.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch allows auto completion work normal for sub command case,
"info block [DEVICE]" can auto complete now, by re-enter the completion
function. In original code "info" is treated as a special case, now it
is treated as a sub command group, global variable info_cmds is not used
any more.
"help" command is still treated as a special case, since it is not a sub
command group but want to auto complete command in root command table.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In order to support sub command in auto completion, a reentrant function
is needed, so monitor_find_completion() is split into two parts. The
first part does parsing of user input which need to be done only once,
the second part does the auto completion job according to the parsing
result, which contains the necessary code to support sub command and
works as the reentrant function. The global "info_cmds" is still used
in second part, which will be replaced by sub command code later.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The old code in help_cmd() uses global 'info_cmds' and treats it as a
special case. Actually 'info_cmds' is a sub command group of 'mon_cmds',
in order to avoid direct use of it, help_cmd() needs to change its work
mechanism to support sub command and not treat it as a special case
any more.
To support sub command, help_cmd() will first parse the input and then call
help_cmd_dump(), which works as a reentrant function. When it meets a sub
command, it simply enters the function again. Since help dumping needs to
know whole input to printf full help message include prefix, for example,
"help info block" need to printf prefix "info", so help_cmd_dump() takes all
args from input and extra parameter arg_index to identify the progress.
Another function help_cmd_dump_one() is introduced to printf the prefix
and command's help message.
Now help supports sub command, so later if another sub command group is
added in any depth, help will automatically work for it. Still "help info
block" will show error since command parser reject additional parameter,
which can be improved later. "log" is still treated as a special case.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since this function will be used by help_cmd() later, so improve
it to make it more generic and easier to use. free_cmdline_args()
is added too as paired function to free the result.
One change of this function is that, when the valid args in input
exceed the limit of MAX_ARGS, it fails now, instead of return with
MAX_ARGS of parsed args in old code. This should not impact much
since it is rare that user input many args in monitor's "help" and
auto complete scenario.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
help_cmd() need this function later, so move it. get_str() is called by
parse_cmdline() so it is moved also. Some code style error reported by
check script, is also fixed.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
New member *cmd_table is added in structure Monitor to avoid direct usage of
*mon_cmds. Now monitor have an associated command table, when global variable
*info_cmds is also discarded, structure Monitor would gain full control about
how to deal with user input.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In qmp_human_monitor_command(), the monitor need to initialized for
basic functionalities, and later more init code will be added, so
split off this function. Note that it is different with QMP mode
monitor which accept json string from monitor's input,
qmp_human_monitor_command() retrieve the human style command from
QMP input, then send the command to a normal mode monitor.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Now all completion functions do not use *cur_mon any more, instead
they use rs->mon. In short, structure ReadLineState decide where
the complete action would be taken now.
Tested with the case that qemu have two telnet monitors, auto
completion function works normal.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Parameter *mon is added, and local variable *mon added in previous patch
is removed. The caller readline_completion(), pass rs->mon as value, which
should be initialized in readline_init() called by monitor_init().
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
A new local variable *mon is added in monitor_find_completion()
to make compile pass, which will be removed later in
conversion patch for monitor_find_completion().
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Function expr_error gets a format string and variable arguments like printf.
It also never returns. Add the necessary attributes.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Some code needs to perform an IPL-like bootup that mimics the
ESA (31bit) restart. Provide a cpu class method that does so.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Provide a function that resets the I/O subsystem.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Linux uses a check for subcode 6 to decide if other subcodes are
available. Provide a minimal implementation for subcode 6, as well
as for subcode 5.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Move code from kvm.c into misc_helper.c]
This alignes case statements to switch statements in the handle_diag
function as mandated by coding style.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
* qemu-kvm/uq/master:
kvm-stub: fix compilation
kvm: shorten the parameter list for get_real_device()
kvm: i386: fix LAPIC TSC deadline timer save/restore
kvm-all.c: max_cpus should not exceed KVM vcpu limit
kvm: Simplify kvm_handle_io
kvm: x86: fix setting IA32_FEATURE_CONTROL with nested VMX disabled
kvm: add KVM_IRQFD_FLAG_RESAMPLE support
kvm: migrate vPMU state
target-i386: remove tabs from target-i386/cpu.h
Initialize IA32_FEATURE_CONTROL MSR in reset and migration
Conflicts:
target-i386/cpu.h
target-i386/kvm.c
aliguori: fixup trivial conflicts due to whitespace and added cpu
argument
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Stefan Weil
# Via Stefan Weil
* sweil/mingw:
gtk: Remove unused include statements which are not portable
w32: Add an icon resource
w32: Fix broken out-of-tree builds (missing version.o)
Message-id: 1377607132-21336-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups, future-proofing of ROM files,
and a virtio bugfix correcting splice on virtio console.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 26 Aug 2013 01:34:20 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Markus Armbruster (5) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio: virtqueue_get_avail_bytes: fix desc_pa when loop over the indirect descriptor table
pc_piix: Kill pc_init1() memory region args
pc: pc_compat_1_4() now can call pc_compat_1_5()
pc: Create pc_compat_*() functions
pc: Kill pc_init_pci_1_0()
pc: Don't explode QEMUMachineInitArgs into local variables needlessly
pc: Don't prematurely explode QEMUMachineInitArgs
ppc: Don't duplicate QEMUMachineInitArgs in PPCE500Params
ppc: Don't explode QEMUMachineInitArgs into local variables needlessly
sun4: Don't prematurely explode QEMUMachineInitArgs
q35: Add PCIe switch to example q35 configuration
loader: store FW CFG ROM files in RAM
arch_init: align MR size to target page size
pc: cleanup 1.4 compat support
Message-id: 1377535318-30491-1-git-send-email-mst@redhat.com
Indeed, remove it entirely and remove the is_tcg_gen_code check
from GETPC_EXT.
Fixes https://bugs.launchpad.net/qemu/+bug/1218098 wherein a call
to a "normal" helper function performed a sequence of tail calls
all the way into the memory helper functions, leading to a stack
frame in which the memory helper function appeared to be called
directly from tcg.
Signed-off-by: Richard Henderson <rth@twiddle.net>
In get_physical_address() is a qemu_log() call inside an #if 0 block.
When enabled the following build error is hit:
target-mips/helper.c In function ‘get_physical_address’:
target-mips/helper.c:220:13: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘hwaddr’ [-Werror=format]
Fix the *physical (hwaddr) formatting by using "%"HWADDR_PRIx instead of
TARGET_FMT_lx.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Non-KVM targets fail compilation on the uq/master branch.
Fix the prototype of kvm_irqchip_add_irqfd_notifier to match
the one in kvm-all.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.
Machines that care:
* pc and its variants
Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
'c', 'd' and 'n'. Reject all others (fatal with -boot).
* nseries (n800, n810)
Check whether order starts with 'n'. Silently ignored otherwise.
* prep, g3beige, mac99
Extract the first character the machine understands (subset of
'a'..'f'). Silently ignored otherwise.
* spapr
Accept an arbitrary string (vl.c restricts it to contain only
'a'..'p', no duplicates).
* sun4[mdc]
Use the first character. Silently ignored otherwise.
Strip characters these machines ignore from their default boot order.
For all other machines, remove the unused default boot order
alltogether.
Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds pci_cfg_read and pci_cfg_write traces for config spaces
accesses.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These include files don't exist for MinGW and are not needed for Linux
(and hopefully for other hosts as well), so remove them.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Commit 0b516ef0df added version.o to all
executables, but broke out-of-tree builds: for those builds the pattern
rule %.o: %.rc from rules.mak does not match, so version.o was no longer
built.
Adding explicit build rules fixes this.
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
commit 3984890181
pc: limit 64 bit hole to 2G by default
introduced a way for management to control
the window allocated to the 64 bit PCI hole.
This is useful, but existing management tools do not know how to set
this property. As a result, e.g. specifying a large ivshmem device with
size > 4G is broken by default. For example this configuration no
longer works:
-device ivshmem,size=4294967296,chardev=cfoo
-chardev socket,path=/tmp/sock,id=cfoo,server,nowait
Fix this by detecting that hole size was not specified
and defaulting to the backwards-compatible value of 1 << 62.
Cc: qemu-stable@nongnu.org
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A PCI device's DMA address space (possibly an IOMMU) is returned by a
method on the PCIBus. At the moment that only has one caller, so the
method is simply open coded. We'll need another caller for VFIO, so
this patch introduces a helper/wrapper function.
If IOMMU is not set, the pci_device_iommu_address_space() function
returns the parent's IOMMU skipping the "bus master" address space as
otherwise proper emulation would require more effort for no benefit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[aik: added inheritance from parent if iommu is not set for the current bus]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Discontinue the jump-around-jump-to-jump scheme, trading it for a single
immediate move instruction. The two extra jumps always consume 7 bytes,
whereas the immediate move is either 5 or 7 bytes depending on where the
code_gen_buffer gets located.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Avoid a loop in the tlb_fill path; the fill will either succeed or
generate an exception.
Inline the slow_ld/st function; it was a complete copy of the main
helper except for the actual cross-page unaligned code, and the
compiler was inlining it anyway.
Add unlikely markers optimizing for the most common case of simple
tlb miss.
Make sure the compiler can optimize away the unaligned paths for a
1 byte access.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Allow the code that tcg generates to be less obtuse, passing in
the return address directly instead of computing it in the helper.
Maintain the old entrance point unchanged as an alternate entry point.
Delete the helper_st*_cmmu prototypes; the implementations did not exist.
Signed-off-by: Richard Henderson <rth@twiddle.net>
No point in splitting the write into 32-bit pieces.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Aliasing was forcing s->code_ptr to be re-read after the store.
Keep the pointer in a local variable to help the compiler.
Signed-off-by: Richard Henderson <rth@twiddle.net>
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
win32-aio: drop win32_aio_flush_cb()
aio-win32: replace incorrect AioHandler->opaque usage with ->e
aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
aio / timers: Remove legacy interface
aio / timers: Switch entire codebase to the new timer API
aio / timers: Add scripts/switch-timer-api
aio / timers: Add test harness for AioContext timers
aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
aio / timers: Convert rtc_clock to be a QEMUClockType
aio / timers: Remove main_loop_timerlist
aio / timers: Rearrange timer.h & make legacy functions call non-legacy
aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
aio / timers: Remove alarm timers
aio / timers: Add documentation and new format calls
aio / timers: Use all timerlists in icount warp calculations
aio / timers: Introduce new API timer_new and friends
aio / timers: On timer modification, qemu_notify or aio_notify
aio / timers: Convert mainloop to use timeout
aio / timers: Convert aio_poll to use AioContext timers' deadline
...
Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
MAINTAINERS update for stable-0.15
# gpg: Signature made Thu 22 Aug 2013 10:59:31 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber
# Via Andreas Färber
* afaerber/tags/0.15-maintainer-for-anthony:
MAINTAINERS: Take over 0.15 maintenance
virtqueue_get_avail_bytes: when found a indirect desc, we need loop over it.
/* loop over the indirect descriptor table */
indirect = 1;
max = vring_desc_len(desc_pa, i) / sizeof(VRingDesc);
num_bufs = i = 0;
desc_pa = vring_desc_addr(desc_pa, i);
But, It init i to 0, then use i to update desc_pa. so we will always get:
desc_pa = vring_desc_addr(desc_pa, 0);
the last two line should swap.
Cc: qemu-stable@nongnu.org
Signed-off-by: Yin Yin <yin.yin@cs2c.com.cn>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This gives the dumped blob its correct address during disassembly,
which makes pc-relative insns much easier to interpret.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The script massages the output produced for architectures that are
not supported internally by qemu though an external objdump program
for disassembly.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The OBJD-[HT] tags will be used by a script to run the hex blob
through objdump --disassemble.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
get_real_device() has 5 parameters with the last 4 is contained in the first
structure.
This patch removes the last 4 parameters and directly use them from the first
parameter.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The io_flush argument to qemu_aio_set_event_notifier() has been removed
since the block layer learnt to drain requests by itself. Fix the
Windows build for win32-aio.o by updating the
qemu_aio_set_event_notifier() call and dropping win32_aio_flush_cb().
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The AioHandler->opaque field does not exist in aio-win32.c. The code
that uses it was incorrectly copied from aio-posix.c. For Windows we
can use AioHandler->e to match against AioContext->notifier.
This patch fixes the Windows build for aio-win32.o.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove dummy_io_handler_flush from tests/test-aio.c as it does
nothing now.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove the legacy interface from include/qemu/timers.h.
Ensure struct QEMUClock is not exposed at all.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add scripts/switch-timer-api to programatically rewrite source
files to use the new timer system.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test harness for AioContext timers. The g_source equivalent is
unsatisfactory as it suffers from false wakeups.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert block_job_sleep_ns and co_sleep_ns to use the new timer
API.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert rtc_clock to be a QEMUClockType
Move rtc_clock users to use the new API
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now we have timerlistgroups implemented and main_loop_tlg, we
no longer need the concept of a default timer list associated
with each clock. Remove it and simplify initialisation of
clocks and timer lists.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rearrange timer.h so it is in order by function type.
Make legacy functions call non-legacy functions rather than vice-versa.
Convert cpus.c to use new API.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add utility functions qemu_clock_get_ms and qemu_clock_get_us
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove qemu_clock_deadline and qemu_timerlist_deadline now we are using
the ns functions throughout.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove alarm timers from qemu-timers.c now we use g_poll / ppoll
instead.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add documentation for existing qemu timer calls. Add new format
calls of the format timer_XXX rather than qemu_XXX_timer
for consistency.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Notify all timerlists derived from vm_clock in icount warp
calculations.
When calculating timer delay based on vm_clock deadline, use
all timerlists.
For compatibility, maintain an apparent bug where when using
icount, if no vm_clock timer was set, qemu_clock_deadline
would return INT32_MAX and always set an icount clock expiry
about 2 seconds ahead.
NB: thread safety - when different timerlists sit on different
threads, this will need some locking.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce new API for creating timers - timer_new and
_ns, _ms, _us derivatives.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On qemu_mod_timer_ns, ensure qemu_notify or aio_notify is called to
end the appropriate poll(), irrespective of use_icount value.
On qemu_clock_enable, ensure qemu_notify or aio_notify is called for
all QEMUTimerLists attached to the QEMUClock.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert mainloop to use timeout from default timerlist group
(i.e. the current 3 static timers)
main-loop.c produces a (possibly spurious) warning about
multiple iterations. Adapt the way this works for a signed
timeout and make the warning a bit safer.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert aio_poll to use deadline based on AioContext's timers.
aio_poll has been changed to return accurately whether progress
has occurred. Prior to this commit, aio_poll always returned
true if g_poll was entered, whether or not any progress was
made. This required a change to tests/test-aio.c where an
assert was backwards.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add aio_timer_init and aio_timer_new wrapper functions.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Calculate the timeout in aio_ctx_prepare taking into account
the timers attached to the AioContext.
Alter aio_ctx_check similarly.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a notify pointer to QEMUTimerList so it knows what to notify
on a timer change.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a QEMUTimerListGroup each AioContext (meaning a QEMUTimerList
associated with each clock is added) and delete it when the
AioContext is freed.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add QEMUTimerListGroup and helper functions, to represent
a QEMUTimerList associated with each clock. Add a default
QEMUTimerListGroup representing the default timer lists
which are not associated with any other object (e.g.
an AioContext as added by future patches).
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Split QEMUClock into QEMUClock and QEMUTimerList so that we can
have more than one QEMUTimerList associated with the same clock.
Introduce a main_loop_timerlist concept and make existing
qemu_clock_* calls that actually should operate on a QEMUTimerList
call the relevant QEMUTimerList implementations, using the clock's
default timerlist. This vastly reduces the invasiveness of this
change and means the API stays constant for existing users.
Introduce a list of QEMUTimerLists associated with each clock
so that reenabling the clock can cause all the notifiers
to be called. Note the code to do the notifications is added
in a later patch.
Switch QEMUClockType to an enum. Remove global variables vm_clock,
host_clock and rt_clock and add compatibility defines. Do not
fix qemu_next_alarm_deadline as it's going to be deleted.
Add qemu_clock_use_for_deadline to indicate whether a particular
clock should be used for deadline calculations. When use_icount
is true, vm_clock should not be used for deadline calculations
as it does not contain a nanosecond count. Instead, icount
timeouts come from the execution thread doing aio_notify or
qemu_notify as appropriate. This function is used in the next
patch.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make qemu_run_timers and qemu_run_all_timers return progress
so that aio_poll etc. can determine whether a timer has been
run.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Where supported, called prctl(PR_SET_TIMERSLACK, 1, ...) to
set one nanosecond timer slack to increase precision of timer
calls.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add qemu_poll_ns which works like g_poll but takes a nanosecond
timeout.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
SUSE is shipping qemu-kvm 0.15.1 with SLES 11 SP2 so we will be actively
tracking all KVM-related issues. Therefore upgrade to Supported.
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Laszlo Ersek (8) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
scripts/qapi.py: Avoid syntax not supported by Python 2.4
monitor: print the invalid char in error message
OptsVisitor: introduce unit tests, with test cases for range flattening
add "test-int128" and "test-bitops" to .gitignore
OptsVisitor: don't try to flatten overlong integer ranges
OptsVisitor: opts_type_uint64(): recognize intervals when LM_IN_PROGRESS
OptsVisitor: rebase opts_type_uint64() to parse_uint_full()
OptsVisitor: opts_type_int(): recognize intervals when LM_IN_PROGRESS
OptsVisitor: introduce list modes for interval flattening
OptsVisitor: introduce basic list modes
Convert stderr message calling error_get_pretty() to error_report()
Message-id: 1377015041-6567-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Jia Liu
# Via Jia Liu
* jliu/or32:
hw/openrisc: Avoid undefined shift in openrisc_pic_cpu_handler()
hw/openrisc: Fix masking in openrisc_pic_cpu_handler()
hw/openrisc: Avoid using uninitialised variable 'entry'
Message-id: 1377050811-11116-1-git-send-email-proljc@gmail.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Make treatment of disabled clocks consistent in deadline calculation
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add utility functions to qemu-timer.c for nanosecond timing.
Add qemu_clock_deadline_ns to calculate deadlines to
nanosecond accuracy.
Add utility function qemu_soonest_timeout to calculate soonest deadline.
Add qemu_timeout_ns_to_ms to convert a timeout in nanoseconds back to
milliseconds for when ppoll is not used.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename qemu_new_clock to qemu_clock_new.
Expose clock types.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename four functions in preparation for new API.
Rename qemu_timer_expired to timer_expired
Rename qemu_timer_expire_time_ns to timer_expire_time_ns
Rename qemu_timer_pending to timer_pending
Rename qemu_timer_expired_ns to timer_expired_ns
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMware ESX hosts also use different create and extent types for flat
files, respectively "vmfs" and "VMFS". This is not documented, but it
can be found at http://kb.vmware.com/kb/10002511 (Recreating a missing
virtual machine disk (VMDK) descriptor file).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMware ESX hosts use a variant of the VMDK3 format, identified by the
vmfsSparse create type ad the VMFSSPARSE extent type.
It has 16 KB grain tables (L2) and a variable-size grain directory (L1).
In addition, the grain size is always 512, but that is not a problem
because it is included in the header.
The format of the extents is documented in the VMDK spec. The format
of the descriptor file is not documented precisely, but it can be
found at http://kb.vmware.com/kb/10026353 (Recreating a missing virtual
machine disk (VMDK) descriptor file for delta disks).
With these patches, vmfsSparse files only work if opened through the
descriptor file. Data files without descriptor files, as far as I
could understand, are not supported by ESX.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
--
v2: Rebase to patch 01.
Change le64_to_cpu to le32_to_cpu.
Rename vmdk_open_vmdk3 to vmdk_open_vmfs_sparse, which represents the
current usage of this format.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This header check is common to VMDK3 and VMDK4, so move it into
vmdk_add_extent().
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When user tries to use read-only whitelist format in the command line
option, failure message was "'foo' invalid format". It might be invalid
only for writable, but valid for read-only, so it is confusing. Give the
user easier to understand information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While Asias is debugging an issue creating qcow2 images on top of
non-file protocols. It boils down to this example using NBD:
$ qemu-io -c 'open -g nbd+unix:///?socket=/tmp/nbd.sock' -c 'read -v 0 512'
Notice the open -g option to set bs->growable. This means you can
read/write beyond end of file. Reading beyond end of file is supposed
to produce zeroes.
We rely on this behavior in qcow2_create2() during qcow2 image
creation. We create a new file and then write the qcow2 header
structure using bdrv_pwrite(). Since QCowHeader is not a multiple of
sector size, block.c first uses bdrv_read() on the empty file to fetch
the first sector (should be all zeroes).
Here is the output from the qemu-io NBD example above:
$ qemu-io -c 'open -g nbd+unix:///?socket=/tmp/nbd.sock' -c 'read -v 0 512'
00000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ................
00000010: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ................
00000020: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ................
...
We are not zeroing the buffer! As a result qcow2 image creation on top
of protocols is not guaranteed to work even when file creation is
supported by the protocol.
[Adapted this patch to use bs->zero_beyond_eof.
-- Stefan]
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In 4146b46c42e0989cb5842e04d88ab6ccb1713a48 (block: Produce zeros when
protocols reading beyond end of file), we break qemu-iotests ./check
-qcow2 022. This happens because qcow2 temporarily sets ->growable = 1
for vmstate accesses (which are stored beyond the end of regular image
data).
We introduce the bs->zero_beyond_eof to allow qcow2_load_vmstate() to
disable ->zero_beyond_eof temporarily in addition to enable ->growable.
[Since the broken patch "block: Produce zeros when protocols reading
beyond end of file" has not been merged yet, I have applied this fix
*first* and will then apply the next patch to keep the tree bisectable.
-- Stefan]
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
All callers always use the same values (get_system_memory(),
get_system_io()), so the parameters are pointless.
If one day we decide to eliminate get_system_memory() and
get_system_io(), we will be able to do that more easily by adding the
values to struct QEMUMachineInitArgs.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It just needs to set has_pvpanic=false after calling it. This way, it
won't be a special case anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Making the older compat functions call the newer compat functions at the
beginning allows the older functions undo what's done by newer compat
functions. e.g.: pc_compat_1_4() will be able to call pc_compat_1_5()
and then set has_pvpanic=false.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The pc_init_pci_1_2()/pc_init_pci_1_0() split was made on commit
6fd028f64f, in preparation for commit
9953f8822c. The latter was reverted, so there's
no reason to keep two separate functions that do exactly the same, anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Don't explode when the variable is used just a few times, and never
changed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pass on the generic arguments unadulterated, and the machine-specific
ones as separate argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Don't explode when the variable is used just once, and never changed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Don't explode QEMUMachineInitArgs before passing it to
sun4m_hw_init(), sun4uv_init().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By the time that qemu 1.7 will be released, enough time will have passed
since qemu 1.1, which is the first version to understand version 3
images, that changing the default shouldn't hurt many people any more
and the benefits of using the new format outweigh the pain.
qemu-iotests already runs with compat=1.1 by default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In C99 signed shift (1 << 31) is undefined behavior, since the result
exceeds INT_MAX. Use 1U instead and move the shift after the check.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Jia Liu <proljc@gmail.com>
Consider the masking of PICSR and PICMR:
((cpu->env.picsr && (1 << i)) && (cpu->env.picmr && (1 << i)))
To correctly mask bits, we should use the bitwise AND "&" rather than
the logical AND "&&". Also, the loop is not necessary for masking.
Simply use (cpu->env.picsr & cpu->env.picmr).
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Jia Liu <proljc@gmail.com>
clang warns that cpu_openrisc_load_kernel() can use 'entry' uninitialized:
hw/openrisc/openrisc_sim.c:69:9: error: variable 'entry' is used uninitialized
whenever '&&' condition is false [-Werror,-Wsometimes-uninitialized]
if (kernel_filename && !qtest_enabled()) {
^~~~~~~~~~~~~~~
hw/openrisc/openrisc_sim.c:91:19: note: uninitialized use occurs here
cpu->env.pc = entry;
^~~~~
Fix this by not attempting to change the CPU's starting PC unless
we actually loaded a kernel.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jia Liu <proljc@gmail.com>
ROM files that are put in FW CFG are copied to guest ram, by BIOS, but
they are not backed by RAM so they don't get migrated.
Each time we change two bytes in such a ROM this breaks cross-version
migration: since we can migrate after BIOS has read the first byte but
before it has read the second one, getting an inconsistent state.
Future-proof this by creating, for each such ROM,
an MR serving as the backing store.
This MR is never mapped into guest memory, but it's registered
as RAM so it's migrated with the guest.
Naturally, this only helps for -M 1.7 and up, older machine types
will still have the cross-version migration bug.
Luckily the race window for the problem to trigger is very small,
which is also likely why we didn't notice the cross-version
migration bug in testing yet.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Migration code assumes that each MR is a multiple of TARGET_PAGE_SIZE:
MR size is divided by TARGET_PAGE_SIZE, so if it isn't migration
never completes.
But this isn't really required for regions set up with
memory_region_init_ram, since that calls qemu_ram_alloc
which aligns size up using TARGET_PAGE_ALIGN.
Align MR size up to full target page sizes, this way
migration completes even if we create a RAM MR
which is not a full target page size.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make 1.4 compat code call the 1.6 one, reducing
code duplication. Add comment explaining why we can't
make 1.4 call 1.5 as usual.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
The configuration of the timer represented by MSR_IA32_TSCDEADLINE depends on:
- APIC LVT Timer register.
- TSC value.
Change the order to respect the dependency.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
maxcpus, which specifies the maximum number of hotpluggable CPUs,
should not exceed KVM's vcpu limit.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
[Reword message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that cpu_in/out is just a wrapper around address_space_rw, we can
also call the latter directly. As host endianness == guest endianness,
there is no need for the memory access helpers st*_p/ld*_p as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
target-arm queue
# gpg: Signature made Tue 20 Aug 2013 08:56:28 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Peter Maydell (20) and Peter Chubb (1)
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130820: (21 commits)
hw/timer/imx_epit: Simplify and fix imx_epit implementation
default-configs: Fix A9MP and A15MP config names
hw/cpu/a15mpcore: Wire generic timer outputs to GIC inputs
target-arm: Implement the generic timer
target-arm: Support coprocessor registers which do I/O
target-arm: Allow raw_read() and raw_write() to handle 64 bit regs
hw/arm/pic_cpu: Remove the now-unneeded arm_pic_init_cpu()
hw/arm/xilinx_zynq: Don't use arm_pic_init_cpu()
hw/arm/vexpress: Don't use arm_pic_init_cpu()
hw/arm/versatilepb: Don't use arm_pic_init_cpu()
hw/arm/strongarm: Don't use arm_pic_init_cpu()
hw/arm/realview: Don't use arm_pic_init_cpu()
hw/arm/omap*: Don't use arm_pic_init_cpu()
hw/arm/musicpal: Don't use arm_pic_init_cpu()
hw/arm/kzm: Don't use arm_pic_init_cpu()
hw/arm/integratorcp: Don't use arm_pic_init_cpu()
hw/arm/highbank: Don't use arm_pic_init_cpu()
hw/arm/exynos4210: Don't use arm_pic_init_cpu()
hw/arm/armv7m: Don't use arm_pic_init_cpu()
target-arm: Make IRQ and FIQ gpio lines on the CPU object
...
Message-id: 1377007680-4934-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
The Python "except Foo as x" syntax was only introduced in
Python 2.6, but we aim to support Python 2.4 and later.
Use the old-style "except Foo, x" syntax instead, thus
fixing configure/compile on systems with older Python.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It's more friendly to print which char is invalid to user, especially
when user tries to input a float value and expect the monitor to round
it to int. Since we don't round float number when we look for a integer,
telling which char is invalid is less confusing.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
According to commit 4f193e34
("tests: Use qapi-schema-test.json as schema parser test")
the "tests/qapi-schema/qapi-schema-test.out" file must be updated as well.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
"test-int128" was probably missed in commit 6046c620
("int128: optimize and add test cases").
"test-bitops" was probably missed in commit 3464700f
("tests: Add test-bitops.c with some sextract tests").
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Prevent mistyped command line options from incurring high memory and CPU
usage at startup. 64K elements in a range should be enough for everyone
(TM).
The OPTS_VISITOR_RANGE_MAX macro is public so that unit tests can
construct corner cases with it.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When a well-formed range value, bounded by unsigned integers, is
encountered while processing a repeated option, enter LM_UNSIGNED_INTERVAL
and return the low bound.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When a well-formed range value, bounded by signed integers, is encountered
while processing a repeated option, enter LM_SIGNED_INTERVAL and return
the low bound.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The new modes are equal-rank, exclusive alternatives of LM_IN_PROGRESS.
Teach opts_next_list(), opts_type_int() and opts_type_uint64() to handle
them.
Also enumerate explicitly what functions are valid to call in what modes:
- opts_next_list() is valid to call while flattening a range,
- opts_end_list(): ditto,
- lookup_scalar() is invalid to call during flattening; generated qapi
traversal code must continue asking for the same kind of signed/unsigned
list element until the interval is fully flattened,
- processed(): ditto.
List mode restrictions are always formulated in positive / inclusive
sense. The restrictions for lookup_scalar() and processed() are
automatically satisfied by current qapi traversals if the schema to build
is compatible with OptsVisitor.
The new list modes are not entered yet.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We're going to need more state while processing a list of repeated
options. This change eliminates "repeated_opts_first" and adds a new state
variable:
list_mode repeated_opts repeated_opts_first
-------------- ------------- -------------------
LM_NONE NULL false
LM_STARTED non-NULL true
LM_IN_PROGRESS non-NULL false
Additionally, it is documented that lookup_scalar() and processed(), both
called by opts_type_XXX(), are invalid in LM_STARTED -- generated qapi
code calls opts_next_list() to allocate the very first link before trying
to parse a scalar into it. List mode restrictions are expressed in
positive / inclusive form.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Convert stderr messages calling error_get_pretty()
to error_report().
Timestamp is prepended by -msg timstamp option with it.
Per Markus's comment below, A conversion from fprintf() to
error_report() is always an improvement, regardless of
error_get_pretty().
http://marc.info/?l=qemu-devel&m=137513283408601&w=2
But, it is not reasonable to convert them at one time
because fprintf() is used everwhere in qemu.
So, it should be done step by step with avoiding regression.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Stefan Hajnoczi
# Via Stefan Hajnoczi
* stefanha/block-next:
aio: drop io_flush argument
tests: drop event_active_cb()
thread-pool: drop thread_pool_active()
dataplane/virtio-blk: drop flush_true() and flush_io()
block/ssh: drop return_true()
block/sheepdog: drop have_co_req() and aio_flush_request()
block/rbd: drop qemu_rbd_aio_flush_cb()
block/nbd: drop nbd_have_request()
block/linux-aio: drop qemu_laio_completion_cb()
block/iscsi: drop iscsi_process_flush()
block/gluster: drop qemu_gluster_aio_flush_cb()
block/curl: drop curl_aio_flush()
aio: stop using .io_flush()
tests: adjust test-thread-pool to new aio_poll() semantics
tests: adjust test-aio to new aio_poll() semantics
dataplane/virtio-blk: check exit conditions before aio_poll()
block: stop relying on io_flush() in bdrv_drain_all()
block: ensure bdrv_drain_all() works during bdrv_delete()
Message-id: 1376921877-9576-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Richard Henderson
# Via Richard Henderson
* rth/axp-next:
target-alpha: Implement the typhoon iommu
target-alpha: Consider the superpage when threading and ending TBs
target-alpha: Use goto_tb in call_pal
target-alpha: Implement call_pal without an exception
Message-id: 1376720412-2165-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
QOM CPUState refactorings / X86CPU
* gdbstub coprocessor register count bugfix
* QOM instance_post_init infrastructure to override dynamic properties
* X86CPU HyperV preparations for CPU subclasses
# gpg: Signature made Fri 16 Aug 2013 11:49:02 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Eduardo Habkost (3) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
cpus: Use cpu_is_stopped() efficiently
target-i386: Move hyperv_* static globals to X86CPU
qdev: Set globals in instance_post_init function
qom: Introduce instance_post_init hook
tests: Unit tests for qdev global properties handling
gdbstub: Fix gdb_register_coprocessor() register counting
When imx_epit.c was last refactored, a common usecase (comparison
register zero) broke. This patch fixes that, and simplifies the code
yet more. It also fixes a major thinko in the reset path --- the
wrong bits in the control register were being cleared.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Reviewed-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When individual CONFIG_ switches for the A9MPcore and A15MPcore
devices were created, they were inadvertently given incorrect names
(CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are
"Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is
a different (rather older) CPU than the Cortex-A9. Rename the
CONFIG_ switches to bring them into line with the source file
names and CPU names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org
The ARMv7 architecture specifies a 'generic timer' which is implemented
via cp15 registers. Newer kernels will prefer to use this rather than
a devboard-level timer. Implement the generic timer for TCG; for KVM
we will already use the hardware's virtualized timer for this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1376065080-26661-4-git-send-email-peter.maydell@linaro.org
Add an ARM_CP_IO flag which an ARMCPRegInfo definition can use to
indicate that the register's implementation does I/O and thus
its accesses need to be surrounded by gen_io_start()/gen_io_end()
in order for icount to work. Most notably, cp registers which
implement clocks or timers need this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1376065080-26661-3-git-send-email-peter.maydell@linaro.org
Now that ARMCPU is a subclass of DeviceState, we can make the
CPU's inbound IRQ and FIQ lines be simply gpio lines, which
means we can remove the odd arm_pic shim.
We retain the arm_pic_init_cpu() function as a backwards
compatibility shim layer so we can convert the board models
to get the IRQ and FIQ lines directly from the ARMCPU
object one at a time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-2-git-send-email-peter.maydell@linaro.org
The 'int' loglevel for recording interrupts and exceptions
requires support in the target-specific code. Implement
it for ARM. This improves debug logging in some situations
that were otherwise pretty opaque, such as when we fault
trying to execute at an exception vector address, which
would otherwise cause an infinite loop of taking exceptions
without any indication in the debug log of what was going on.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1375700771-21665-1-git-send-email-peter.maydell@linaro.org
The .io_flush() handler no longer exists and has no users. Drop the
io_flush argument to aio_set_fd_handler() and related functions.
The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no
longer used and are dropped too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the io_flush argument to aio_set_event_notifier().
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.io_flush() is no longer called so drop thread_pool_active(). The block
layer is the only thread-pool.c user and it already tracks in-flight
requests, therefore we do not need thread_pool_active().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.io_flush() is no longer called so drop qemu_rbd_aio_flush_cb().
qemu_aio_count is unused now so drop it too.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.io_flush() is no longer called so drop nbd_have_request(). We cannot
drop in_flight since it is still used by other block/nbd.c code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.io_flush() is no longer called so drop qemu_laio_completion_cb(). It
turns out that count is now unused so drop that too.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since .io_flush() is no longer called we do not need
qemu_gluster_aio_flush_cb() anymore. It turns out that qemu_aio_count
is unused now and can be dropped.
Thanks to Bharata B Rao <bharata@linux.vnet.ibm.com> for catching a
build failure with CONFIG_GLUSTERFS_DISCARD, which has been fixed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.io_flush() is no longer called so drop curl_aio_flush(). The acb[]
array that the function checks is still used in other parts of
block/curl.c. Therefore we cannot remove acb[], it is needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that aio_poll() users check their termination condition themselves,
it is no longer necessary to call .io_flush() handlers.
The behavior of aio_poll() changes as follows:
1. .io_flush() is no longer invoked and file descriptors are *always*
monitored. Previously returning 0 from .io_flush() would skip this file
descriptor.
Due to this change it is essential to check that requests are pending
before calling qemu_aio_wait(). Failure to do so means we block, for
example, waiting for an idle iSCSI socket to become readable when there
are no requests. Currently all qemu_aio_wait()/aio_poll() callers check
before calling.
2. aio_poll() now returns true if progress was made (BH or fd handlers
executed) and false otherwise. Previously it would return true whenever
'busy', which means that .io_flush() returned true. The 'busy' concept
no longer exists so just progress is returned.
Due to this change we need to update tests/test-aio.c which asserts
aio_poll() return values. Note that QEMU doesn't actually rely on these
return values so only tests/test-aio.c cares.
Note that ctx->notifier, the EventNotifier fd used for aio_notify(), is
now handled as a special case. This is a little ugly but maintains
aio_poll() semantics, i.e. aio_notify() does not count as 'progress' and
aio_poll() avoids blocking when the user has not set any fd handlers yet.
Patches after this remove .io_flush() handler code until we can finally
drop the io_flush arguments to aio_set_fd_handler() and friends.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_poll(ctx, true) will soon block when fd handlers have been set.
Previously aio_poll() would return early if all .io_flush() returned
false. This means we need to check the equivalent of the .io_flush()
condition *before* calling aio_poll(ctx, true) to avoid deadlock.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_poll(ctx, true) will soon block if any fd handlers have been set.
Previously it would only block when .io_flush() returned true.
This means that callers must check their wait condition *before*
aio_poll() to avoid deadlock.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check exit conditions before entering blocking aio_poll(). This is
mainly for consistency since it's unlikely that we are stopping in the
first event loop iteration.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a block driver has no file descriptors to monitor but there are still
active requests, it can return 1 from .io_flush(). This is used to spin
during synchronous I/O.
Stop relying on .io_flush() and instead check
QLIST_EMPTY(&bs->tracked_requests) to decide whether there are active
requests.
This is the first step in removing .io_flush() so that event loops no
longer need to have the concept of synchronous I/O. Eventually we may
be able to kill synchronous I/O completely by running everything in a
coroutine, but that is future work.
Note this patch moves bs->throttled_reqs initialization to bdrv_new() so
that bdrv_requests_pending(bs) can safely access it. In practice bs is
g_malloc0() so the memory is already zeroed but it's safer to initialize
the queue properly.
We also need to fix up block/stream.c:close_unused_images() to prevent
traversing a dangling pointer while it rearranges the backing file
chain. This is necessary since the new bdrv_drain_all() traverses the
backing file chain.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In bdrv_delete() make sure to call bdrv_make_anon() *after* bdrv_close()
so that the device is still seen by bdrv_drain_all() when iterating
bdrv_states.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows significantly more threading, and occasionally larger TBs,
when processing code for the kernel and PALcode.
Signed-off-by: Richard Henderson <rth@twiddle.net>
With appropriate flushing when the PALBR changes, the target of
a CALL_PAL is so predictable we can chain to it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The destination of the call_pal, and the cpu state, is very predictable;
there's no need for exiting the cpu loop.
Signed-off-by: Richard Henderson <rth@twiddle.net>
- since hyperv_* helper functions are used only in target-i386/kvm.c
move them there as static helpers
Requested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This way, properties registered in the instance_init function of
child classes will be handled properly by qdev_prop_set_globals(), too.
Includes a unit test for the new functionality.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will allow classes to specify a function to be called after all
instance_init functions were called.
This will be used by DeviceState to call qdev_prop_set_globals() at the
right moment.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This tests the qdev global-properties handling code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit a0e372f0c4 reorganized the register
counting for GDB. While it seems correct not to let the total number of
registers skyrocket in an SMP scenario through a static variable, the
distinction between total register count and 'g' packet register count
(last_reg vs. num_g_regs) got lost among the way.
Fix this by introducing CPUState::gdb_num_g_regs and using that in
gdb_handle_packet().
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org (stable-1.6)
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since commit c658b94f6e, MIPS raises
exceptions when accessing invalid memory. This is not the correct
behaviour for MIPS Malta Core LV, as the GT-64120A system controller
just ignore undecoded access. This feature is used by the Linux kernel
to probe for some devices.
Emulate the correct behaviour in QEMU by adding an empty slot covering
the entire memory space decoded by the GT-64120A.
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit bd5c51e (qemu-char: don't issue CHR_EVENT_OPEN in a BH), an
infinite recursion occurs when putting the monitor on a pty (-monitor
pty) and connecting a terminal to the slave port.
This is because of the qemu_chr_be_event(s, CHR_EVENT_OPENED) added to
qemu_chr_be_generic_open(). This event is captured by monitor_event()
which prints a welcome message to the character device. The flush of
that welcome message retriggers another open event in pty_chr_state()
because it checks s->connected, but only sets it to 1 after calling
qemu_chr_be_generic_open().
I've fixed this by setting s->connected = 1 before the call to
qemu_chr_be_generic_open() instead of after, so that the recursive
pty_chr_state() doesn't call it again.
An example snippet of repeating backtrace:
...
#107486 0x007aec58 in monitor_flush (mon=0xf418b0) at qemu/monitor.c:288
#107487 0x007aee7c in monitor_puts (mon=0xf418b0, str=0x1176d07 "") at qemu/monitor.c:322
#107488 0x007aef20 in monitor_vprintf (mon=0xf418b0, fmt=0x8d4820 "QEMU %s monitor - type 'help' for more information\n",
ap=0x7f432be0) at qemu/monitor.c:339
#107489 0x007aefac in monitor_printf (mon=0xf418b0, fmt=0x8d4820 "QEMU %s monitor - type 'help' for more information\n")
at qemu/monitor.c:347
#107490 0x007ba4bc in monitor_event (opaque=0xf418b0, event=2) at qemu/monitor.c:4699
#107491 0x00684c28 in qemu_chr_be_event (s=0xf37788, event=2) at qemu/qemu-char.c:108
#107492 0x00684c70 in qemu_chr_be_generic_open (s=0xf37788) at qemu/qemu-char.c:113
#107493 0x006880a4 in pty_chr_state (chr=0xf37788, connected=1) at qemu/qemu-char.c:1145
#107494 0x00687fa4 in pty_chr_update_read_handler (chr=0xf37788) at qemu/qemu-char.c:1121
#107495 0x00687c9c in pty_chr_write (chr=0xf37788, buf=0x70b3c008 <Address 0x70b3c008 out of bounds>, len=538720)
at qemu/qemu-char.c:1063
#107496 0x00684cc4 in qemu_chr_fe_write (s=0xf37788, buf=0x70b3c008 <Address 0x70b3c008 out of bounds>, len=538720)
at qemu/qemu-char.c:118
...
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1375960178-10882-1-git-send-email-james.hogan@imgtec.com
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Context matching caused the 'has_pvpanic = true' to be applied to
the 1.6 machine type instead of the 1.5 machine type.
Reported-by: Markus Armbruster <armbru@redhat.com>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QOM CPUState refactorings
* Fix X86CPU Westmere CPUID for pc-*-1.4 and older
* afaerber/tags/qom-cpu-for-anthony:
pc: Remove PCLMULQDQ from Westmere on pc-*-1.4 and older
Conflicts:
hw/i386/pc_piix.c
hw/i386/pc_q35.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 41cb383f42 made a guest-visible
change by adding the PCLMULQDQ bit to Westmere without adding
compatibility code to keep the ABI for older machine-types.
Fix it by adding the missing compat code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We've gotten reports from multiple testers (including Frank Yangjie
and myself) that RDMA IPv6 support over RocE (Ethernet) is broken
in linux.
A patch to Linux is still in review:
http://comments.gmane.org/gmane.linux.drivers.rdma/16448
If the user is listening on '[::]', then we will not have a opened a device
yet and have no way of verifying if the device is RoCE or not.
In this case, the source VM will throw an error for ALL types of
connections (both IPv4 and IPv6) if the destination machine does not have
a regular infiniband network available for use.
The only way to gaurantee that an error is thrown for broken kernels is
for the management software to choose a *specific* interface at bind time
and validate what time of hardware it is.
Unfortunately, this puts the user in a fix:
If the source VM connects with an IPv4 address without knowing that the
destination has bound to '[::]' the migration will unconditionally fail
unless the management software is not explicitly listening on the the IPv4
address while using a RoCE-based device.
If the source VM connects with an IPv6 address, then we're OK because we can
throw an error on the source (and similarly on the destination).
But in mixed environments, this will be broken for a while until it is fixed
inside linux.
We do provide a *tiny* bit of help in mixed environments, though in this patch:
We can list all of the devices in the system and check to see if all the
devices are RoCE or Infiniband.
If we detect that we have a *pure* RoCE environment, then we can safely
thrown an error even if the management sofware has specified '[::]' as the
bind address.
However, if there is are multiple hetergeneous devices, then we cannot make
this assumption and the user just has to be sure they know what they are doing.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Message-id: 1376078746-24948-6-git-send-email-mrhines@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With the new semantics of pc_sysfw (no -pflash implies "old-style" ROM setup,
-pflash implies "new-style" ROM setup), there is no need anymore for a compat
property. Old machines simply will never use -pflash, and thus will always
use old-style setup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1376069702-22330-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The variable is not written anymore.
This cleans up after 9e1c2ec (which accidentally left variable
pc_sysfw_flash_vs_rom_bug_compatible behind, value always zero), and
buries dead code from commit dafb82e (which resurrected the pc_sysfw
code for pc_sysfw_flash_vs_rom_bug_compatible by mistake).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1376069702-22330-2-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU executables for w32, w64 had included meta information built from
version.rc. These rules were changed several times some months ago.
The latest version added version.o to the tools, but not to the system
emulations.
This patch adds the meta information to all system emulations again.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1375985887-3984-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 6d4cd40 fixed qemu_opts_set_defaults() for an existing corner
case, but broke it for another one that can't be reached in current
code.
Quote from its commit message:
I believe [opts_parse()] attempts to do the following:
If options don't yet exist, create new options
Else, if defaults, modify the existing options
Else, if list->merge_lists, modify the existing options
Else, fail
The only caller that passes true for defaults is
qemu_opts_set_defaults().
The commit message then claims:
A straightforward call of qemu_opts_create() does exactly that.
Wrong. When !list->merge_lists, and the option string doesn't contain
id=, and options without ID exist, then we don't actually modify the
existing options, we create new ones.
Not reachable, because we never pass lists with !list->merge_lists to
qemu_opts_set_defaults().
Guard against possible (if unlikely) future misuse with assert().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1375428840-5275-1-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
1) The GPL says that "if the Program does not specify a version number
of this License, you may choose any version ever published by the Free
Software Foundation". This is not true, QEMU includes parts that are
v2-only.
2) Provide a default for files with no licensing information.
3) It is not just hardware emulation that is under BSD license.
4) Restrict GPLv2-only contributions to user mode emulation (due to
code from Linux) and PCI passthrough (due to code from Neocleus).
5) The rules were initially set by Fabrice but are being amended by
other people (already in commit ee12e1f, LICENSE: There is no libqemu.a
anymore, 2011-11-15). Do not put words in his mouth.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375251592-2537-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci,virtio fixes for 1.6
This includes some last-minute bugfixes for 1.6.
All very small patches that also look very safe to me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 12 Aug 2013 04:28:57 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
vhost: clear signalled_used_valid on vhost stop
virtio: clear signalled_used_valid when switching from dataplane
i82801b11: Fix i82801b11 PCI host bridge config space
pc: disable pci-info for 1.6
Message-id: 1376308831-19978-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
arm-devs queue
# gpg: Signature made Mon 12 Aug 2013 05:58:14 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Peter Maydell
# Via Peter Maydell
* pmaydell/tags/pull-arm-devs-20130812:
hw/virtio/virtio-mmio: Make QueueNumMax read 0 for unavailable queues
hw/virtio/virtio: Don't allow guests to add/remove queues
Message-id: 1376305261-29561-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* origin/master:
mips: revert commit b332d24a8e
tcg/mips: fix invalid op definition errors
Necessary because patches got pushed by Aurelien before I pushed
the -rc2 tag.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When vhost device stops, its implementation synchronizes kernel state
back to virtio.c so we can continue emulating the device
in userspace.
This patch ensures that virtio.c's signalled_used_valid flag is reset so
that userspace does not suppress guest notifications due to stale
signalled_used values.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the dataplane thread stops, its vring.c implementation synchronizes
vring state back to virtio.c so we can continue emulating the virtio
device.
This patch ensures that virtio.c's signalled_used_valid flag is reset so
that we do not suppress guest notifications due to stale signalled_used
values.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The BIOS that we ship in 1.6 does not use pci info
from host (yet). Several issues turned up
(e.g. around winXP boot crashes). So it's safest to disable that
interface for 1.6 machine types for now, leave it on for 1.7
as we have enough time to fix issues if any.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added an EventNotifier* parameter to
kvm-all.c:kvm_irqchip_add_irqfd_notifier(), in order to give KVM
another eventfd to be used as "resamplefd". See the documentation
in the linux kernel sources in Documentation/virtual/kvm/api.txt
(section 4.75) for more details.
When the added parameter is passed NULL, the behaviour of the
function is unchanged with respect to the previous versions.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When use -drive file='xxx',format=qcow2,snapshot=on the error
message "Can't use snapshot=on with driver-specific options"
can be show, and fail to start the qemu.
This should not be happened, and there is no file.driver option
in qemu command line.
It is because the commit 74fe54f2a1,
it puts 'driver' option if the command line use 'format' option.
This patch is to solve this bug.
Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that this code path is not triggered anymore during the tests,
revert commit b332d24a8e. Booting a MIPS
target without kernel nor bios doesn't really make sense. At the same
time replace fprintf(stderr, ...) by error_report().
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
tcg/mips/tcg-target.h defines various operations conditionally depending
upon the isa revision, however these operations are included in
mips_op_defs[] unconditionally resulting in the following runtime errors
if CONFIG_DEBUG_TCG is defined:
Invalid op definition for movcond_i32
Invalid op definition for rotl_i32
Invalid op definition for rotr_i32
Invalid op definition for deposit_i32
Invalid op definition for bswap16_i32
Invalid op definition for bswap32_i32
tcg/tcg.c:1196: tcg fatal error
Fix with ifdefs like the i386 backend does for movcond_i32.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
While the machine is paused, in guest_phys_blocks_append() we register a
one-shot MemoryListener, solely for the initial collection of the valid
guest-physical memory ranges that happens at listener registration time.
For each range that is reported to guest_phys_blocks_region_add(), we
attempt to merge the range with the preceding one.
Ranges can only be joined if they are contiguous in both guest-physical
address space, and contiguous in host virtual address space.
The "maximal" ranges that remain in the end constitute the guest-physical
memory map that the dump will be based on.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The vmcore must use physical addresses that are visible to the guest, not
addresses that point into linear RAMBlocks. As first step, introduce the
list type into which we'll collect the physical mappings in effect at the
time of the dump.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Even a trusted & clean-state guest can map more memory than what it was
given. Since the vmcore contains RAMBlocks, mapping sizes should be
clamped to RAMBlock sizes. Otherwise such oversized mappings can exceed
the entire file size, and ELF parsers might refuse even the valid portion
of the PT_LOAD entry.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Running "make install" modified the *.po files because
they were no longer up to date.
Synchronize them with latest ui/gtk.c and modified build
rules which use paths relative to the project root.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1375731922-24259-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 03a15a5436 claimed to add a POWER7+
model but instead added a "POWER7P" model, with an unhelpful "POWER7P"
description on top. Fix this to "POWER7+" as we already have "POWER3+",
"POWER4+" and "POWER5+" and there being no reason to deviate with the
user-visible command line -cpu POWER7P from the marketing name POWER7+.
Further, don't needlessly deviate from the scheme of naming PVR constant,
QOM type and device description after the exact revision that is in fact
encoded in the PVR used.
That way, we can change the user-friendly alias -cpu POWER7+ to point to a
different revision if we so desire, while not polluting the type namespace.
This naming scheme is sensible and completely orthogonal to how PVRs may
or may not get matched to CPU types.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375736387-8429-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QOM CPUState refactorings
* Clean up X86CPU error handling
# gpg: Signature made Tue 06 Aug 2013 01:57:34 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
target-i386: Fix X86CPU error handling
# By Fam Zheng (8) and others
# Via Kevin Wolf
* kwolf/for-anthony:
vmdk: rename num_gtes_per_gte to num_gtes_per_gt
vmdk: use heap allocation for whole_grain
vmdk: check l1 size before opening image
vmdk: check l2 table size when opening
vmdk: check granularity field in opening
qemu-iotests: add empty test case for vmdk
qemu-iotests: add poke_file utility function
vmdk: use unsigned values for on disk header fields
vmdk: Make VMDK3Header and VmdkGrainMarker QEMU_PACKED
sheepdog: add missing .bdrv_has_zero_init
qemu-iotests: filter QEMU version in monitor banner
iov: handle EOF in iov_send_recv
ignore SIGPIPE in qemu-img and qemu-io
qemu-img: Error out for excess arguments
Message-id: 1375799990-995-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Error **errp argument is not for emitting warnings, it means an error
has occurred and the caller should not make any assumptions about the
state of other return values (unless otherwise documented).
Therefore cpu_x86_create() must unref the new X86CPU itself, and
pc_new_cpu() must check for an Error rather than NULL return value.
While at it, clean up a superfluous NULL check.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: qemu-stable@nongnu.org
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
num_gtes_per_gte is a historical typo, rename it to a more sensible
name. It means "number of GrainTableEntries per GrainTable".
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should never grow the stack beyond 1 MB, otherwise we'll fall off the
end. Thread stacks and coroutine stacks (1 MB) do not grow.
get_cluster_offset() allocates a big stack offset, it will fail for big
cluster images, change to heap allocated buffer.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
L1 table size is calculated from capacity, granularity and l2 table
size. If capacity is too big or later two are too small, the L1 table
will be too big to allocate in memory. Limit it to a reasonable range.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
header.num_gtes_per_gte determines size for L2 table. Check for too big
value before using it. Limit to 512M entries (2GB per one L2 table).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Granularity is used to calculate the cluster size and allocate r/w
buffer. Check the value from image before using it, so we don't abort()
for unbounded memory allocation.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new poke_file function sets bytes at an offset in a file given a
printf-style format string. It can be used to corrupt an image file for
test coverage of error paths.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The size and offset fields are all non-negative values, use uint64_t for
them to avoid getting negative in memory value by int overflow.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's best to make it consistent that all on disk structures are
QEMU_PACKED.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix incorrect assumption that DSP and non-DSP versions of the following
instructions have the same encoding:
MULT, MULTU, MADD, MADDU, MSUB, MSUBU, MFHI, MFLO, MTHI, MTLO.
Correct the existing (non-DSP) instructions and add DSP equivalents.
Reference:
MIPS Architecture for Programmers Volume II-B: The microMIPS32
Instruction Set
MIPS Architecture for Programmers Volume IV-e: The MIPS DSP Module for
the microMIPS32 Architecture
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 3ac21627 changed the behaviour of bdrv_has_zero_init() to default
to 0. In the review for Sheepdog it turned out that enabling it is safe,
so that commit updated one BlockDriver definition of sheepdog to use
bdrv_has_zero_init_1, missed however that there are more BlockDrivers in
the driver. Fix these now.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filter out the QEMU monitor version banner so that tests do not break
when the QEMU version number is changed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This prevents the tools from being stopped when they write data to a
closed connection in the other side.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Don't silently ignore excess arguments at the end of the command line,
but error out instead. This can catch typos like 'resize test.img + 1G',
which doesn't increase the image size by 1G as intended, but truncates
the image to 1G. Even for less dangerous commands, the old behaviour is
confusing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix following bugs in "fallback implementation of counting semaphores
with mutex+condvar" added in c166cb72f1:
- waiting threads are not restarted properly if more than one threads
are waiting unblock signals in qemu_sem_timedwait()
- possible missing pthread_cond_signal(3) calls when waiting threads
are returned by ETIMEDOUT
- fix an uninitialized variable
The problem is analyzed by and fix is provided by Noriyuki Soda.
Also put additional cleanup suggested by Laszlo Ersek:
- make QemuSemaphore.count unsigned (it won't be negative)
- check a return value of in pthread_cond_wait() in qemu_sem_wait()
Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1372841894-10634-1-git-send-email-tsutsui@ceres.dti.ne.jp
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
RDMA does not use sockets, so we cannot use many of the socket
helper functions, but we *do* use inet_parse() which gives
RDMA all the necessary details of the connection parameters.
However, when testing with libvirt, a simple IPv6 migration test failed
because we were not using getaddrinfo() properly.
This makes IPv6 migration over RDMA work.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Message-id: 1375584894-9917-2-git-send-email-mrhines@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pxa2xx_i2c_init() creates a pxa2xx-i2c-slave device on a second i2c-bus,
which has a NULL parent device. This causes an assertion in
object_get_canonical_path() when accessing pxa2xx-i2c-slave's
"parent_bus" link<bus> property in tosa and likely other PXA2xx machines.
Fix this by using the pxa2xx_i2c device, created just before, as parent.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375621501-5564-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Fam Zheng (1) and others
# Via Michael Tokarev
* mjt/trivial-patches:
vmdk: fix comment for vmdk_co_write_zeroes
memory.c: drop kvm.h dependency
block/iscsi.c: Fix printf format error.
qemu-ga: build it even if !system
Message-id: 1375453248-7178-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Analogously to other NICs, we have to inform the network layer when
the can_receive handler will no longer report 0. Without this, we may
get stuck waiting on queued incoming packets.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
34Kf core does support DSP ASE.
CP0_Config3 configuration for 34Kf and description are wrong.
Please refer to MIPS32(R) 34Kf(TM) Processor Core Datasheet
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We don't want to commit to the API yet before everything is worked out.
Like already for 1.5, disable it again for the 1.6 release. This commit
is meant to be reverted after the 1.6 release.
The disabling of the driver-specific options is achieved by applying the
old checks while parsing the command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The comment was truncated. Add the missing parts, especially explain why
we need zero_dry_run.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
memory.c does not use any kvm specific interfaces,
don't include kvm.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The error on armv7hl was:
block/iscsi.c: In function ‘is_request_lun_aligned’:
block/iscsi.c:251:26: error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘int64_t’ [-Werror=format=]
iscsilun->block_size, sector_num, nb_sectors);
^
This also splits the long line to comply with qemu coding guidelines.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move qemu-ga build check out of if softmmu.. into its own section.
We want to build qemu-ga for _guest_ even if system build isn't
done. It is controlled separately using --enable-guest-agent.
Additionally, give error message if guest agent is requested but
not supported.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QOM CPUState refactorings
* Clean up AlphaCPU and OpenRISCCPU migration
# gpg: Signature made Wed 31 Jul 2013 04:57:59 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
cpu: Fix VMSTATE_CPU() semantics
PReP machine and devices
* Fixes for i82378 PCI-ISA bridge endianness handling
# gpg: Signature made Wed 31 Jul 2013 04:25:51 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Hervé Poussineau
# Via Andreas Färber
* afaerber/tags/prep-for-upstream:
i82378: Cleanup implementation
pci-host/prep: Set isa_mem_base in the PCI host bridge
Reinitialize dev->cs to NULL after deleting it, to make sure it isn't
used afterwards.
Reported-by: Martin Cerveny <M.Cerveny@computer.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Guest trying to reset a endpoint of a disconnected device resulted in
xhci trying to dereference uport while being NULL, thereby crashing
qemu. Fix that by adding a check. Drop unused dev variable while
touching that code bit.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- i82378 only exists on PCI bus; do not split implementation in 2 structs
- remove BARs, which are not specified in datasheet
- replace custom isa_mmio implementation by PCI bus IO region usage
- use QOM casts when required
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: Style- and QOM-related changes, dropped no_user, reverted VMSD name]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Currently, it is done by i82378 PCI-ISA bridge, which shouldn't
care about it.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Commit 1a1562f5ea prepared a VMSTATE_CPU()
macro for device-style VMStateDescription registration, but missed to
adapt cpu_exec_init(), so that the "cpu_common" VMStateDescription was
still registered for AlphaCPU (fe31e73742)
and OpenRISCCPU (da69721460). Fix this.
Cc: Richard Henderson <rth@twiddle.net>
Tested-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This lowers time spent in helper_window_check as reported by perf top
from ~8% to ~0.15% accelerating register-intensive tests by ~20%.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This fixes the following test failure caused by access to undefined SR:
qemu-system-xtensa -M sim -cpu dc232b -nographic -semihosting -kernel ./test_sr.tst
QEMU 1.4.50 monitor - type 'help' for more information
(qemu) QEMU 1.4.50 monitor - type 'help' for more information
(qemu) qemu-system-xtensa: tcg/tcg.c:1673: temp_save: Assertion `s->temps[temp].val_type == 2 || s->temps[temp].fixed_reg' failed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
env->exception_taken is set every time an exception is taken. It is used
to allow single-stepping to stop at the first exception handler
instruction. This however must exclude debug exceptions, as otherwise
first step from the instruction where breakpoint was hit stops at that
same instruction.
Also don't check env->exception_taken directly from the
gen_intermediate_code_internal, instead allocate and use TB flag
XTENSA_TBFLAG_EXCEPTION.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The recent KVM patch adds IA32_FEATURE_CONTROL support. QEMU needs
to clear this MSR when reset vCPU and keep the value of it when
migration. This patch add this feature.
Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-07-25 13:09:08 +03:00
1221 changed files with 159791 additions and 104087 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
