Compare commits

..

631 Commits

Author SHA1 Message Date
Wolfgang Bumiller
c62e90af8c vnc: fix tls-creds error message
The parameter is called 'tls-creds', 'credid' is just the
variable name in the code.

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1452681360-29239-1-git-send-email-w.bumiller@proxmox.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-18 16:36:21 +01:00
Christophe Fergeau
06bb88145c Fix corner-case when using VNC+SASL+SPICE
Similarly to the commit 764eb39d1b fixing VNC+SASL+QXL, when starting
QEMU with SPICE but no SASL, and at the same time VNC with SASL, then
spice_server_init() will get called without a previous call to
spice_server_set_sasl_appname(), which will cause cyrus-sasl to
try to use /etc/sasl2/spice.conf (spice-server uses "spice" as its
default appname) rather than the expected /etc/sasl2/qemu.conf.

This commit unconditionally calls spice_server_set_sasl_appname()
before calling spice_server_init() in order to use the correct appname
even if SPICE without SASL was requested on qemu command line.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 1452607738-1521-1-git-send-email-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-18 16:36:21 +01:00
Wolfgang Bumiller
67c4c2bd95 vnc: clear vs->tlscreds after unparenting it
This pointer should be cleared in vnc_display_close()
otherwise a use-after-free can happen when when using the
old style 'x509' and 'tls' options rather than a persistent
tls-creds -object, by issuing monitor commands to change
the vnc server like so:

Start with: -vnc unix:test.socket,x509,tls
Then use the following monitor command:
  change vnc unix:test.socket

After this the pointer is still set but invalid and a crash
can be triggered for instance by issuing the same command a
second time which will try to object_unparent() the same
pointer again.

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-18 16:36:21 +01:00
Paolo Bonzini
fba958c692 gtk: implement set_echo
Even without line editing, this makes -qmp vc more pleasant with the
GTK+ backend.  The only issue is that set_echo is invoked very early,
long before a vc is actually associated with a VirtualConsole.  To work
around this, create a temporary VirtualConsole until then.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1450356422-31710-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-18 16:36:21 +01:00
Peter Maydell
4aaddc2976 Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging
qemu-sparc update

# gpg: Signature made Sat 16 Jan 2016 12:32:06 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"

* remotes/mcayland/tags/qemu-sparc-signed:
  target-sparc: Migrate CWP and PIL for SPARC64
  target-sparc: Use VMState arrays for SPARC64 TLB/MMU state
  target-sparc: Convert to VMStateDescription
  target-sparc: Don't flush TLB in cpu_load function
  target-sparc: Split cpu_put_psr into side-effect and no-side-effect parts
  vmstate: define vmstate_info_uinttl
  vmstate: Introduce VMSTATE_VARRAY_MULTPLY
  vmstate: introduce CPU_DoubleU arrays

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-18 09:33:36 +00:00
Peter Maydell
6d5322442a target-sparc: Migrate CWP and PIL for SPARC64
In SPARC32 the env->cwp and env->psrpil state is part of the PSR
register, and gets migrated as part of that register.
In SPARC64 this state is in separate CWP and PIL registers, but we
were not doing anything to migrate those.

Add the missing fields to the migration vmstate (which is a
migration break, but without these fields migration is completely
broken anyway).

This change means that trying a save/load of a SPARC64 target at
the boot rom prompt now produces a system which at least responds
to keyboard input after the restore.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-16 12:01:23 +00:00
Peter Maydell
0e88d45a33 target-sparc: Use VMState arrays for SPARC64 TLB/MMU state
Use VMState arrays for SPARC64 TLB/MMU state. This is
a migration-break for SPARC64 (but not for SPARC32),
which is acceptable because currently migration does not
work for any SPARC64 machines due to the lack of any migration
of interrupt controller state.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-16 12:01:23 +00:00
Juan Quintela
df32c8d436 target-sparc: Convert to VMStateDescription
Convert the SPARC CPU from cpu_load/save functions to VMStateDescription.
We preserve migration compatibility with the previous version
(required for SPARC32 but not necessarily for SPARC64).

Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM:
 * Rebase and update to apply to master
 * VMSTATE_STRUCT_POINTER now takes type, not pointer-to-type
 * QEMUTimer* are migrated via VMSTATE_TIMER_PTR
 * Put CPUTimer vmstate struct inside TARGET_SPARC64 ifdef
 * Convert handling of PSR to use a vmstate_psr, like Alpha and ARM
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-16 12:01:23 +00:00
Peter Maydell
232afac113 target-sparc: Don't flush TLB in cpu_load function
There's no need to flush the TLB in the SPARC cpu_load function: we're
guaranteed to be loading state into a fresh clean configuration.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-16 12:01:23 +00:00
Peter Maydell
4552a09dd4 target-sparc: Split cpu_put_psr into side-effect and no-side-effect parts
For inbound migration we really want to be able to set the PSR without
having any side effects, but cpu_put_psr() calls cpu_check_irqs() which
might try to deliver CPU interrupts. Split cpu_put_psr() into the
no-side-effect and side-effect parts.

This includes reordering the cpu_check_irqs() to the end of cpu_put_psr(),
because that function may actually end up calling cpu_interrupt(), which
does not seem like a good thing to happen in the middle of updating the PSR.

Suggested-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-16 12:01:23 +00:00
Juan Quintela
365162f7c0 vmstate: define vmstate_info_uinttl
We are going to define arrays of this type, so we need the integer type.

Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: updated to apply on current QEMU; renamed to 'uinttl'
 rather than 'uinttls' to match other vmstate naming]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-16 12:01:23 +00:00
Juan Quintela
b47d3af755 vmstate: Introduce VMSTATE_VARRAY_MULTPLY
This allows to send a partial array where the size is another
structure field multiplied by a constant.

Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: updated to current master]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-16 12:01:23 +00:00
Juan Quintela
551747491d vmstate: introduce CPU_DoubleU arrays
Add vmstate support for migrating arrays of CPU_DoubleU via
VMSTATE_CPUDOUBLE_ARRAY.

Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: rebased, since files have all moved since 2012;
 added VMSTATE_CPUDOUBLE_ARRAY_V for consistency with FLOAT64]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-16 12:01:23 +00:00
Peter Maydell
19b6d84316 Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* qemu-char logfile facility
* NBD coroutine based negotiation
* bugfixes

# gpg: Signature made Fri 15 Jan 2016 17:58:28 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream:
  qemu-char: do not leak QemuMutex when freeing a character device
  qemu-char: add logfile facility to all chardev backends
  nbd-server: do not exit on failed memory allocation
  nbd-server: do not check request length except for reads and writes
  nbd-server: Coroutine based negotiation
  nbd: Split nbd.c
  nbd: Always call "close_fn" in nbd_client_new
  SCSI device: fix to incomplete QOMify
  iscsi: send readcapacity10 when readcapacity16 failed
  qemu-char: delete send_all/recv_all helper methods
  vmw_pvscsi: x-disable-pcie, x-old-pci-configuration back-compat props are 2.5 specific
  scsi: initialise info object with appropriate size
  i386: avoid null pointer dereference
  target-i386: do not duplicate page protection checks
  scsi: revert change to scsi_req_cancel_async and add assertions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 18:01:43 +00:00
Paolo Bonzini
fefd749ce2 qemu-char: do not leak QemuMutex when freeing a character device
The leak is only apparent on Win32.  On POSIX platforms destroying a
mutex is not necessary.

Reported-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:02 +01:00
Daniel P. Berrange
d0d7708ba2 qemu-char: add logfile facility to all chardev backends
Typically a UNIX guest OS will log boot messages to a serial
port in addition to any graphical console. An admin user
may also wish to use the serial port for an interactive
console. A virtualization management system may wish to
collect system boot messages by logging the serial port,
but also wish to allow admins interactive access.

Currently providing such a feature forces the mgmt app
to either provide 2 separate serial ports, one for
logging boot messages and one for interactive console
login, or to proxy all output via a separate service
that can multiplex the two needs onto one serial port.
While both are valid approaches, they each have their
own downsides. The former causes confusion and extra
setup work for VM admins creating disk images. The latter
places an extra burden to re-implement much of the QEMU
chardev backends logic in libvirt or even higher level
mgmt apps and adds extra hops in the data transfer path.

A simpler approach that is satisfactory for many use
cases is to allow the QEMU chardev backends to have a
"logfile" property associated with them.

 $QEMU -chardev socket,host=localhost,port=9000,\
                server=on,nowait,id-charserial0,\
		logfile=/var/log/libvirt/qemu/test-serial0.log
       -device isa-serial,chardev=charserial0,id=serial0

This patch introduces a 'ChardevCommon' struct which
is setup as a base for all the ChardevBackend types.
Ideally this would be registered directly as a base
against ChardevBackend, rather than each type, but
the QAPI generator doesn't allow that since the
ChardevBackend is a non-discriminated union. The
ChardevCommon struct provides the optional 'logfile'
parameter, as well as 'logappend' which controls
whether QEMU truncates or appends (default truncate).

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1452516281-27519-1-git-send-email-berrange@redhat.com>
[Call qemu_chr_parse_common if cd->parse is NULL. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:02 +01:00
Paolo Bonzini
f1c17521e7 nbd-server: do not exit on failed memory allocation
The amount of memory allocated in nbd_co_receive_request is driven by the
NBD client (possibly a virtual machine).  Parallel I/O can cause the
server to allocate a large amount of memory; check for failures and
return ENOMEM in that case.

Cc: qemu-block@nongnu.org
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:02 +01:00
Paolo Bonzini
eb38c3b670 nbd-server: do not check request length except for reads and writes
Only reads and writes need to allocate memory correspondent to the
request length.  Other requests can be sent to the storage without
allocating any memory, and thus any request length is acceptable.

Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Cc: qemu-block@nongnu.org
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:02 +01:00
Fam Zheng
1a6245a5b0 nbd-server: Coroutine based negotiation
Create a coroutine in nbd_client_new, so that nbd_send_negotiate doesn't
need qemu_set_block().

Handlers need to be set temporarily for csock fd in case the coroutine
yields during I/O.

With this, if the other end disappears in the middle of the negotiation,
we don't block the whole event loop.

To make the code clearer, unify all function names that belong to
negotiate, so they are less likely to be misused. This is important
because we rely on negotiation staying in main loop, as commented in
nbd_negotiate_read/write().

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1452760863-25350-4-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:02 +01:00
Fam Zheng
798bfe0006 nbd: Split nbd.c
We have NBD server code and client code, all mixed in a file. Now split
them into separate files under nbd/, and update MAINTAINERS.

filter_nbd for iotest 083 is updated to keep the log filtered out.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1452760863-25350-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:02 +01:00
Fam Zheng
ee7d7aabda nbd: Always call "close_fn" in nbd_client_new
Rename the parameter "close" to "close_fn" to disambiguous with
close(2).

This unifies error handling paths of NBDClient allocation:
nbd_client_new will shutdown the socket and call the "close_fn" callback
if negotiation failed, so the caller don't need a different path than
the normal close.

The returned pointer is never used, make it void in preparation for the
next patch.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1452760863-25350-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:01 +01:00
Cao jin
e1dc68155c SCSI device: fix to incomplete QOMify
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1452073066-28319-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:01 +01:00
Zhu Lingshan
1cb6d137ff iscsi: send readcapacity10 when readcapacity16 failed
When play with Dell MD3000 target, for sure it
is a TYPE_DISK, but readcapacity16 would fail.
Then we find that readcapacity10 succeeded. It
looks like the target just support readcapacity10
even through it is a TYPE_DISK or have some
TYPE_ROM characteristics.

This patch can give a chance to send
readcapacity16 when readcapacity10 failed.
This patch is not harmful to original pathes

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Message-Id: <1451359934-9236-1-git-send-email-lszhu@suse.com>
[Don't fall through on UNIT ATTENTION. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:01 +01:00
Daniel P. Berrange
46f296cd3a qemu-char: delete send_all/recv_all helper methods
The qemu-char.c contains two helper methods send_all
and recv_all. These are in fact declared in sockets.h
so ought to have been in util/qemu-sockets.c. For added
fun the impl of recv_all is completely missing on Win32.

Fortunately there is only a single caller of these
methods, the TPM passthrough code, which is only
ever compiled on Linux. With only a single caller
these helpers are not compelling enough to keep so
inline them in the TPM code, avoiding the need to
fix the missing recv_all on Win32.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1450879144-17111-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:01 +01:00
Shmulik Ladkani
fca1031839 vmw_pvscsi: x-disable-pcie, x-old-pci-configuration back-compat props are 2.5 specific
pvscsi's x-disable-pcie and x-old-pci-configuration backward compat
properties were introduced in 952970b and d5da3ef:

  vmw_pvscsi: Introduce 'x-old-pci-configuration' backword compatability property
  vmw_pvscsi: Introduce 'x-disable-pcie' backword compatability property

and were placed into HW_COMPAT_2_4.

However since these commits were pulled post v2.5, move them to
HW_COMPAT_2_5.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1450900558-20113-1-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:01 +01:00
P J P
36fef36b91 scsi: initialise info object with appropriate size
While processing controller 'CTRL_GET_INFO' command, the routine
'megasas_ctrl_get_info' overflows the '&info' object size. Use its
appropriate size to null initialise it.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <alpine.LFD.2.20.1512211501420.22471@wniryva>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: P J P <ppandit@redhat.com>
2016-01-15 18:58:01 +01:00
P J P
4c1396cb57 i386: avoid null pointer dereference
Hello,

A null pointer dereference issue was reported by Mr Ling Liu, CC'd here. It
occurs while doing I/O port write operations via hmp interface. In that,
'current_cpu' remains null as it is not called from cpu_exec loop, which
results in the said issue.

Below is a proposed (tested)patch to fix this issue; Does it look okay?

===
From ae88a4947fab9a148cd794f8ad2d812e7f5a1d0f Mon Sep 17 00:00:00 2001
From: Prasad J Pandit <pjp@fedoraproject.org>
Date: Fri, 18 Dec 2015 11:16:07 +0530
Subject: [PATCH] i386: avoid null pointer dereference

When I/O port write operation is called from hmp interface,
'current_cpu' remains null, as it is not called from cpu_exec()
loop. This leads to a null pointer dereference in vapic_write
routine. Add check to avoid it.

Reported-by: Ling Liu <liuling-it@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <alpine.LFD.2.20.1512181129320.9805@wniryva>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: P J P <ppandit@redhat.com>
2016-01-15 18:58:01 +01:00
Paolo Bonzini
76c64d3360 target-i386: do not duplicate page protection checks
x86_cpu_handle_mmu_fault is currently checking twice for writability
and executability of pages; the first time to decide whether to
trigger a page fault, the second time to compute the "prot" argument
to tlb_set_page_with_attrs.

Reorganize code so that first "prot" is computed, then it is used
to check whether to raise a page fault, then finally PROT_WRITE is
removed if the D bit will have to be set.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:57:50 +01:00
Paolo Bonzini
3daa41078a scsi: revert change to scsi_req_cancel_async and add assertions
Fam Zheng noticed that the change in commit 36896bf ("scsi: always call
notifier on async cancellation", 2015-12-16) could cause a leak of
the request; scsi_req_cancel_async now calls scsi_req_ref
multiple times for multiple cancellations, but there is only
one call to scsi_req_cancel_complete.

So revert the patch and instead assert that the problematic case (a call
to scsi_req_cancel_async after the aiocb has been completed) cannot
happen.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:57:32 +01:00
Peter Maydell
5a57acb66f Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160115' into staging
target-arm queue:
 * use the right MMU index when handling unaligned accesses
 * xlnx-zynqmp: Add support for high DDR memory regions
 * target-arm: support QMP dump-guest-memory
 * ARM: virt: Don't generate RTC ACPI device when using UEFI

# gpg: Signature made Fri 15 Jan 2016 15:16:19 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160115:
  ARM: virt: Don't generate RTC ACPI device when using UEFI
  target-arm: dump-guest-memory: add vfp notes for arm
  elf: add arm note types
  target-arm: dump-guest-memory: add prfpreg notes for aarch64
  target-arm: support QMP dump-guest-memory
  dump: allow target to set the physical base
  dump: allow target to set the page size
  dump: qemunotes aren't commonly needed
  qapi-schema: dump-guest-memory: Improve text
  xlnx-zynqmp: Add support for high DDR memory regions
  target-arm: Use the right MMU index in arm_regime_using_lpae_format

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 15:49:43 +00:00
Shannon Zhao
67736a25f8 ARM: virt: Don't generate RTC ACPI device when using UEFI
When booting the VM with UEFI, UEFI takes ownership of the RTC hardware.
While UEFI can use libfdt to disable the RTC device node in the DTB that
it passes to the OS, it cannot modify AML. Therefore, we won't generate
the RTC ACPI device at all when using UEFI.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1452867091-4023-1-git-send-email-shannon.zhao@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:55:16 +00:00
Andrew Jones
ade0d0c0d3 target-arm: dump-guest-memory: add vfp notes for arm
gdb won't actually dump these with 'info all-registers' since
it first tries to confirm that it should by checking the VFP
hwcap in the .auxv note. Well, we don't generate an .auxv note.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-9-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:55:16 +00:00
Andrew Jones
7d68e47f12 elf: add arm note types
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-8-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:55:16 +00:00
Andrew Jones
bada8e4470 target-arm: dump-guest-memory: add prfpreg notes for aarch64
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-7-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:55:16 +00:00
Andrew Jones
da2b91409f target-arm: support QMP dump-guest-memory
Add the support needed for creating prstatus elf notes. This
allows us to use QMP dump-guest-memory.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1452542185-10914-6-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: moved setting of cpu::write_elf64_note inside !CONFIG_USER_ONLY
 ifdef to avoid compile failure for linux-user build]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:40:25 +00:00
Andrew Jones
b6e05aa473 dump: allow target to set the physical base
crash assumes the physical base in the kdump subheader of
makedumpfile formatted dumps is correct. Zero is not correct
for all architectures, so allow it to be changed.

(No functional change.)

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-5-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:40:25 +00:00
Andrew Jones
8161befdd1 dump: allow target to set the page size
This is necessary for targets that don't have TARGET_PAGE_SIZE ==
real-target-page-size. The target should set the page size to the
correct one, if known, or, if not known, to the maximum page size
it supports.

(No functional change.)

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-4-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:40:25 +00:00
Andrew Jones
b09afd58e4 dump: qemunotes aren't commonly needed
Only one of three architectures implementing qmp-dump-guest-memory write
qemu notes. And, another architecture (arm/aarch64) is coming, which
won't use them either. Make the common implementation truly common.

(No functional change.)

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:40:24 +00:00
Andrew Jones
f1cd483004 qapi-schema: dump-guest-memory: Improve text
dump-guest-memory is supported by more than just x86, however
the paging option is not.

(No functional change.)

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1452542185-10914-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:39:01 +00:00
Alistair Francis
dc3b89ef87 xlnx-zynqmp: Add support for high DDR memory regions
The Xilinx ZynqMP SoC and EP108 board supports three memory regions:
 - A 2GB region starting at 0
 - A 32GB region starting at 32GB
 - A 256GB region starting at 768GB

This patch adds support for the first two memory regions, which is
automatically created based on the size specified by the QEMU memory
command line argument.

On hardware the physical memory region is one continuous region, it is then
mapped into the three different regions by the DDRC. As we don't model the
DDRC this is done at startup by QEMU. The board creates the memory region and
then passes that memory region to the SoC. The SoC then maps the memory
regions.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: a1e47db941d65733724a300fcd98b74fbeeaaf22.1452637205.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:34:54 +00:00
Alvise Rigo
deb2db996c target-arm: Use the right MMU index in arm_regime_using_lpae_format
arm_regime_using_lpae_format checks whether the LPAE extension is used
for stage 1 translation regimes. MMU indexes not exclusively of a stage 1
regime won't work with this method.

In case of ARMMMUIdx_S12NSE0 or ARMMMUIdx_S12NSE1, offset these values
by ARMMMUIdx_S1NSE0 to get the right index indicating a stage 1
translation regime.

Rename also the function to arm_s1_regime_using_lpae_format and update
the comments to reflect the change.

Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Message-id: 1452854262-19550-1-git-send-email-a.rigo@virtualopensystems.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:10:02 +00:00
Peter Maydell
f02ccf5369 disas/libvixl: Really suppress gcc 4.6.3 sign-compare warnings
Commit 8acc216b95 attempted to silence some sign-compare
warnings in libvixl by adding -Wno-sign-compare to the CFLAGS
for the relevant objects. Unfortunately it was ineffective
because it was placed before $(QEMU_CFLAGS), so the -Wall in
the general flags overrode -Wno-sign-compare rather than
vice-versa. Reorder the flags so the warning suppression works.

Thanks to Franz-Josef Haider <Franz-Josef.Haider@student.uibk.ac.at>
for pointing out what was wrong with the original patch.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1452783202-576-1-git-send-email-peter.maydell@linaro.org
2016-01-14 17:57:51 +00:00
Peter Maydell
17c8a21978 Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-01-13' into staging
Error reporting patches for 2016-01-13

# gpg: Signature made Wed 13 Jan 2016 14:21:48 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-error-2016-01-13: (41 commits)
  checkpatch: Detect newlines in error_report and other error functions
  error: Consistently name Error * objects err, and not errp
  s390/sclp: Simplify control flow in sclp_realize()
  hw/s390x: Rename local variables Error *l_err to just err
  error: Clean up errors with embedded newlines (again)
  vhdx: Fix "log that needs to be replayed" error message
  pci-assign: Clean up "Failed to assign" error messages
  vmdk: Clean up "Invalid extent lines" error message
  vmdk: Clean up control flow in vmdk_parse_extents() a bit
  error: Strip trailing '\n' from error string arguments (again)
  qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()
  migration: Use error_reportf_err() instead of monitor_printf()
  spapr: Use error_reportf_err()
  error: Use error_prepend() where it makes obvious sense
  error: Use error_reportf_err() where it makes obvious sense
  error: Don't decorate original error message when adding to it
  error: New error_prepend(), error_reportf_err()
  test-throttle: Simplify qemu_init_main_loop() error handling
  qemu-nbd: Clean up "Failed to load snapshot" error message
  block: Clean up "Could not create temporary overlay" error message
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-14 13:07:38 +00:00
Peter Maydell
cd0b19a20b Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20160113' into staging
This first round of s390x patches includes:
- new compat machine
- remove the old s390-virtio machine
- fixes and some cleanup

# gpg: Signature made Wed 13 Jan 2016 14:55:55 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"

* remotes/cohuck/tags/s390x-20160113:
  s390x/pci: return real state during listing PCI
  virtio-ccw: fix sanity check for vector
  s390: Introduce CCW_COMPAT_2_5
  s390x/virtio: use qemu_check_nic_model()
  s390x/pci: code cleanup
  s390x/pci: reject some operations to disabled PCI function
  s390x: remove s390-virtio devices
  s390x: remove s390-virtio machine
  s390x: add 2.6 compat machine

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-14 12:42:08 +00:00
Peter Maydell
ed56fdb256 Merge remote-tracking branch 'remotes/amit/tags/vs-for-2.6-1' into staging
small change to qom'ify virtio-serial

# gpg: Signature made Wed 13 Jan 2016 09:51:18 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"

* remotes/amit/tags/vs-for-2.6-1:
  virtio serial port: fix to incomplete QOMify

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-14 11:16:50 +00:00
Peter Maydell
91728bda76 Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.6-1' into staging
migration fixes for postcopy, xbzrle, multithread decompression

# gpg: Signature made Wed 13 Jan 2016 10:34:49 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"

* remotes/amit-migration/tags/migration-for-2.6-1:
  multithread decompression: Avoid one copy
  Use qemu_get_buffer_in_place for xbzrle data
  Migration: Emit event at start of pass
  Postcopy: Send events/change state on incoming side
  migration: Add state records for migration incoming
  migration: Export migrate_set_state()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-14 10:25:33 +00:00
Jason J. Herne
5d596c245d checkpatch: Detect newlines in error_report and other error functions
We don't want newlines embedded in error messages. This seems to be a common
problem with new code so let's try to catch it with checkpatch.

This will not catch cases where newlines are inserted into the middle of an
existing multi-line statement. But those cases should be rare.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <1449858642-24267-1-git-send-email-jjherne@linux.vnet.ibm.com>
[Rephrased "Error function text" to "Error messages", dropped
error_vprintf, error_printf, error_printf from $qemu_error_funcs,
because they may legitimately print newlines]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-13 15:16:19 +01:00
Markus Armbruster
533fdaedeb error: Consistently name Error * objects err, and not errp
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-25-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13 15:16:19 +01:00
Markus Armbruster
24da21f265 s390/sclp: Simplify control flow in sclp_realize()
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-24-git-send-email-armbru@redhat.com>
2016-01-13 15:16:19 +01:00
Markus Armbruster
e6da780d5f hw/s390x: Rename local variables Error *l_err to just err
Let's follow established naming practice here as well.

Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-23-git-send-email-armbru@redhat.com>
2016-01-13 15:16:19 +01:00
Markus Armbruster
433672b0d5 error: Clean up errors with embedded newlines (again)
The arguments of error_report() should yield a short error string
without newlines.

A few places try to print additional help after the error message by
embedding newlines in the error string.  That's nice, but let's do it
the right way.  Commit 474c213 cleaned up some, but they keep coming
back.  Offenders tracked down with the Coccinelle semantic patch from
commit 312fd5f.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-13 15:16:18 +01:00
Markus Armbruster
bf89e87427 vhdx: Fix "log that needs to be replayed" error message
The arguments of error_setg_errno() should yield a short error string
without newlines.

Here, we try to append additional help to the error message by
embedding newlines in the error string.  That's nice, but it's doesn't
play nicely with the errno part.  tests/qemu-iotests/070.out shows the
resulting mess:

    can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed.  To replay the log, execute:
     qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx': Operation not permitted

Switch to error_setg() and error_append_hint().  Result:

    can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed
    To replay the log, run:
    qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx'

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-21-git-send-email-armbru@redhat.com>
2016-01-13 15:16:18 +01:00
Markus Armbruster
c3d2d68ad6 pci-assign: Clean up "Failed to assign" error messages
The arguments of error_setg() & friends should yield a short error
string without newlines.

Two places try to append additional help to the error message by
embedding newlines in the error string.  That's nice, but let's do it
the right way, with error_append_hint().

Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-20-git-send-email-armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2016-01-13 15:16:18 +01:00
Markus Armbruster
d28d737fb9 vmdk: Clean up "Invalid extent lines" error message
vmdk_parse_extents() reports parse errors like this:

    error_setg(errp, "Invalid extent lines:\n%s", p);

where p points to the beginning of the malformed line in the image
descriptor.  This results in a multi-line error message

    Invalid extent lines:
    <first line that doesn't parse>
    <remaining text that may or may not parse, if any>

Error messages should not have newlines embedded.  Since the remaining
text is not helpful, we can simply report:

    Invalid extent line: <first line that doesn't parse>

Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-19-git-send-email-armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
2016-01-13 15:16:18 +01:00
Markus Armbruster
e4937694b6 vmdk: Clean up control flow in vmdk_parse_extents() a bit
Factor out loop stepping to turn a while-loop with goto into a
for-loop with continue.

Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1450452927-8346-18-git-send-email-armbru@redhat.com>
2016-01-13 15:16:18 +01:00
Markus Armbruster
9af9e0fed7 error: Strip trailing '\n' from error string arguments (again)
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back.  Tracked down with the Coccinelle semantic patch
from commit 312fd5f.

Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
2016-01-13 15:16:18 +01:00
Markus Armbruster
b988468149 qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()
Just three instances left.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-16-git-send-email-armbru@redhat.com>
2016-01-13 15:16:18 +01:00
Markus Armbruster
d410fe1454 migration: Use error_reportf_err() instead of monitor_printf()
Both error_reportf_err() and monitor_printf() print to the same
destination when monitor_printf() is used correctly, i.e. within an
HMP monitor.  Elsewhere, monitor_printf() does nothing, while
error_reportf_err() reports to stderr.

Both changed functions are HMP command handlers.  These should only
run within an HMP monitor.

Unlike monitor_printf(), error_reportf_err() uses the error whole
instead of just its message obtained with error_get_pretty().  This
avoids suppressing its hint (see commit 50b7b00), but I don't think
the errors touched in this commit can come with hints.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-15-git-send-email-armbru@redhat.com>
2016-01-13 15:16:17 +01:00
Markus Armbruster
b83baa6025 spapr: Use error_reportf_err()
Not caught by Coccinelle, because we report the error only
conditionally here.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-14-git-send-email-armbru@redhat.com>
2016-01-13 15:16:17 +01:00
Markus Armbruster
e43bfd9c87 error: Use error_prepend() where it makes obvious sense
Done with this Coccinelle semantic patch

    @@
    expression FMT, E1, E2;
    expression list ARGS;
    @@
    -    error_setg(E1, FMT, ARGS, error_get_pretty(E2));
    +    error_propagate(E1, E2);/*###*/
    +    error_prepend(E1, FMT/*@@@*/, ARGS);

followed by manual cleanup, first because I can't figure out how to
make Coccinelle transform strings, and second to get rid of now
superfluous error_propagate().

We now use or propagate the original error whole instead of just its
message obtained with error_get_pretty().  This avoids suppressing its
hint (see commit 50b7b00), but I can't see how the errors touched in
this commit could come with hints.  It also improves the message
printed with &error_abort when we screw up (see commit 1e9b65b).

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13 15:16:17 +01:00
Markus Armbruster
c29b77f955 error: Use error_reportf_err() where it makes obvious sense
Done with this Coccinelle semantic patch

    @@
    expression FMT, E, S;
    expression list ARGS;
    @@
    -    error_report(FMT, ARGS, error_get_pretty(E));
    +    error_reportf_err(E, FMT/*@@@*/, ARGS);
    (
    -    error_free(E);
    |
	 exit(S);
    |
	 abort();
    )

followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.

We now use the error whole instead of just its message obtained with
error_get_pretty().  This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13 15:16:17 +01:00
Markus Armbruster
8aa802a6b7 error: Don't decorate original error message when adding to it
Prepend the additional information, colon, space to the original
message without enclosing it in parenthesis or quotes, like we do
elsewhere.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-11-git-send-email-armbru@redhat.com>
2016-01-13 15:16:17 +01:00
Markus Armbruster
8277d2aa58 error: New error_prepend(), error_reportf_err()
Instead of simply propagating an error verbatim, we sometimes want to
add to its message, like this:

    frobnicate(arg, &err);
    error_setg(errp, "Can't frobnicate %s: %s",
                     arg, error_get_pretty(err));
    error_free(err);

This is suboptimal, because it loses err's hint (if any).  Moreover,
when errp is &error_abort or is subsequently propagated to
&error_abort, the abort message points to the place where we last
added to the error, not to the place where it originated.

To avoid these issues, provide means to add to an error's message in
place:

    frobnicate(arg, errp);
    error_prepend(errp, "Can't frobnicate %s: ", arg);

Likewise, reporting an error like

    frobnicate(arg, &err);
    error_report("Can't frobnicate %s: %s", arg, error_get_pretty(err));

can lose err's hint.  To avoid:

    error_reportf_err(err, "Can't frobnicate %s: ", arg);

The next commits will put these functions to use.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-10-git-send-email-armbru@redhat.com>
2016-01-13 15:16:17 +01:00
Markus Armbruster
73eaa04777 test-throttle: Simplify qemu_init_main_loop() error handling
The code looks like it tries to check for both qemu_init_main_loop()
and qemu_get_aio_context() failure in one conditional.  In fact,
qemu_get_aio_context() can fail only after qemu_init_main_loop()
failed.

Simplify accordingly: check for qemu_init_main_loop() error directly,
without bothering to improve its error message.  Call
qemu_get_aio_context() only when qemu_get_aio_context() succeeded.  It
can't fail then, so no need to check.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-9-git-send-email-armbru@redhat.com>
2016-01-13 15:16:17 +01:00
Markus Armbruster
a4699e55f5 qemu-nbd: Clean up "Failed to load snapshot" error message
bdrv_snapshot_load_tmp() sets an error and returns -errno on failure.
We report both even though the error message is self-contained.  Drop
the redundant strerror().

While there: setting errno right before exit() is pointless, so drop
that, too.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-8-git-send-email-armbru@redhat.com>
2016-01-13 15:16:17 +01:00
Markus Armbruster
cd5c2dac2e block: Clean up "Could not create temporary overlay" error message
bdrv_create() sets an error and returns -errno on failure.  When the
latter is interesting, the error is created with error_setg_errno().

bdrv_append_temp_snapshot() uses the error's message to create a new
one with error_setg_errno().  This adds a strerror() that is either
uninteresting or duplicate.  Use error_setg() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-7-git-send-email-armbru@redhat.com>
2016-01-13 15:16:16 +01:00
Markus Armbruster
f4d0064afc error: Improve documentation
While there, tighten error_append_hint()'s assertion.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-6-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13 15:16:16 +01:00
Markus Armbruster
7828867198 error: Use error_report_err() instead of ad hoc prints
Unlike ad hoc prints, error_report_err() uses the error whole instead
of just its message obtained with error_get_pretty().  This avoids
suppressing its hint (see commit 50b7b00).  Example:

    $ bld/ivshmem-server -l 42@
    Parameter 'shm_size' expects a size
    You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes.

The last line is new with this patch.

While there, drop a "cannot parse shm size: " message prefix; it's
redundant, because the error message proper is always of the form
"Parameter 'shm_size' expects ...".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-5-git-send-email-armbru@redhat.com>
2016-01-13 15:16:16 +01:00
Markus Armbruster
193227f9e5 error: Use error_report_err() instead of monitor_printf()
Both error_report_err() and monitor_printf() print to the same
destination when monitor_printf() is used correctly, i.e. within an
HMP monitor.  Elsewhere, monitor_printf() does nothing, while
error_report_err() reports to stderr.

Most changed functions are HMP command handlers.  These should only
run within an HMP monitor.  The one exception is bdrv_password_cb(),
which should also only run within an HMP monitor.

Four command handlers prefix the error message with the command name:
balloon, migrate_set_capability, migrate_set_parameter, migrate.
Pointless, drop.

Unlike monitor_printf(), error_report_err() uses the error whole
instead of just its message obtained with error_get_pretty().  This
avoids suppressing its hint (see commit 50b7b00).  Example:

    (qemu) device_add ivshmem,id=666
    Parameter 'id' expects an identifier
    Identifiers consist of letters, digits, '-', '.', '_', starting with a letter.
    Try "help device_add" for more information

The "Identifiers consist of..." line is new with this patch.

Coccinelle semantic patch:

    @@
    expression M, E;
    @@
    -    monitor_printf(M, "%s\n", error_get_pretty(E));
    -    error_free(E);
    +    error_report_err(E);
    @r1@
    expression M, E;
    format F;
    position p;
    @@
    -    monitor_printf(M, "...%@F@\n", error_get_pretty(E));@p
    -    error_free(E);
    +    error_report_err(E);
    @script:python@
	p << r1.p;
    @@
    print "%s:%s:%s: prefix dropped" % (p[0].file, p[0].line, p[0].column)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-4-git-send-email-armbru@redhat.com>
2016-01-13 15:16:16 +01:00
Markus Armbruster
4fffeb5e19 error: Use error_report_err() where appropriate (again)
Same Coccinelle semantic patch as in commit 565f65d.

We now use the original error whole instead of just its message
obtained with error_get_pretty().  This avoids suppressing its hint
(see commit 50b7b00), but I don't think the errors touched in this
commit can come with hints.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-3-git-send-email-armbru@redhat.com>
2016-01-13 15:16:16 +01:00
Markus Armbruster
85b01e0960 qemu-nbd: Replace BSDism <err.h> by error_report()
Coccinelle semantic patch

    @@
    expression E;
    expression list ARGS;
    @@
    -       errx(E, ARGS);
    +       error_report(ARGS);
    +       exit(E);
    @@
    expression E, FMT;
    expression list ARGS;
    @@
    -       err(E, FMT, ARGS);
    +       error_report(FMT /*": %s"*/, ARGS, strerror(errno));
    +       exit(E);

followed by a replace of '"/*": %s"*/' by ' : %s"', because I can't
figure out how to make Coccinelle transform strings.

A few of the error messages touched have trailing newlines.  They'll
be stripped later in this series.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-2-git-send-email-armbru@redhat.com>
2016-01-13 15:16:16 +01:00
Markus Armbruster
acef5c02e5 xen-hvm: Mark inappropriate error handling FIXME
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: xen-devel@lists.xensource.com
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450370121-5768-14-git-send-email-armbru@redhat.com>
2016-01-13 15:16:16 +01:00
Markus Armbruster
7e274652e4 audio: Clean up inappropriate and unreachable use of hw_error()
audio_init() should not use hw_error(), because dumping CPU registers
is unhelpful there, and aborting is wrong, because it can be called
called from an audio device's realize() method.

The two uses of hw_error() come from commit 0d9acba:

* When qemu_new_timer() fails.  It couldn't fail back then, and it
  can't fail now.  Drop the unreachable error handling.

* When no_audio_driver can't be initialized.  It couldn't fail back
  then, and it can't fail now.  Replace the error handling by an
  assertion.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-13 15:16:16 +01:00
Markus Armbruster
675463d9b6 isa: Clean up inappropriate hw_error()
isa_bus_irqs(), isa_create() and isa_try_create() call hw_error() when
passed a null bus.  Use of hw_error() has always been questionable,
because these are used only during machine initialization, and
printing CPU registers isn't useful there.

Since the previous commit, passing a null bus is a programming error.
Drop the hw_error() and simply let it crash.

Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1450354795-31608-12-git-send-email-armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-01-13 15:15:57 +01:00
Markus Armbruster
d10e54329b isa: Clean up error handling around isa_bus_new()
We can have at most one ISA bus.  If you try to create another one,
isa_bus_new() complains to stderr and returns null.

isa_bus_new() is called in two contexts, machine's init() and device's
realize() methods.  Since complaining to stderr is not proper in the
latter context, convert isa_bus_new() to Error.

Machine's init():

* mips_jazz_init(), called from the init() methods of machines
  "magnum" and "pica"

* mips_r4k_init(), the init() method of machine "mips"

* pc_init1() called from the init() methods of non-q35 PC machines

* typhoon_init(), called from clipper_init(), the init() method of
  machine "clipper"

These callers always create the first ISA bus, hence isa_bus_new()
can't fail.  Simply pass &error_abort.

Device's realize():

* i82378_realize(), of PCI device "i82378"

* ich9_lpc_realize(), of PCI device "ICH9-LPC"

* pci_ebus_realize(), of PCI device "ebus"

* piix3_realize(), of PCI device "pci-piix3", abstract parent of
  "PIIX3" and "PIIX3-xen"

* piix4_realize(), of PCI device "PIIX4"

* vt82c686b_realize(), of PCI device "VT82C686B"

Propagate the error.  Note that these devices are typically created
only by machine init() methods with qdev_init_nofail() or similar.  If
we screwed up and created an ISA bus before that call, we now give up
right away.  Before, we'd hobble on, and typically die in
isa_bus_irqs().  Similar if someone finds a way to hot-plug one of
these critters.

Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1450370121-5768-11-git-send-email-armbru@redhat.com>
2016-01-13 11:58:59 +01:00
Markus Armbruster
3a80ceadcb isa: Trivially convert remaining PCI-ISA bridges to realize()
These are "ICH9-LPC" and "ebus".

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1450370121-5768-10-git-send-email-armbru@redhat.com>
2016-01-13 11:58:58 +01:00
Markus Armbruster
c72fbf98cb sysbus: Don't use hw_error() in machine_init_done_notifiers
platform_bus_map_irq() and platform_bus_map_mmio() use hw_error() to
fail.  They run in machine_init_done_notifiers, via
platform_bus_init_notify() and link_sysbus_device().  Printing CPU
registers is not helpful there.

Replace hw_error() by error_report(); exit(1).  If these are
programming errors, it should be replaced by an assertion instead.

While there, observe that both functions always return 0, and
link_sysbus_device() ignores the return value.  Change them to void.

Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-9-git-send-email-armbru@redhat.com>
2016-01-13 11:58:58 +01:00
Markus Armbruster
7b55044f9d hw/arm/virt: Fix property "gic-version" error handling
virt_set_gic_version() calls exit(1) when passed an invalid property
value.  Property setters are not supposed to do that.  Screwed up in
commit b92ad39.  Harmless, because the property belongs to a machine.
Set an error object instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-13 11:58:58 +01:00
Markus Armbruster
543202c0dd error: Don't append a newline when printing the error hint
Since commit 50b7b00, we have error_append_hint() to conveniently
accumulate Error member @hint.  error_report_err() prints it with a
newline appended.  Consequently, users of error_append_hint() need to
know whether theirs is the final line of the hint to decide whether it
needs a newline.  Not a nice interface.

Change error_report_err() to print just the hint, and the (still few)
users of error_append_hint() to add the required newline.

Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450370121-5768-7-git-send-email-armbru@redhat.com>
2016-01-13 11:58:58 +01:00
Markus Armbruster
9280eb34de raven: Mark use of hw_error() in realize() FIXME
Device realize() methods aren't supposed to call hw_error(), they
should set an error and fail cleanly.  Blindly doing that would be
easy enough, but then realize() would fail without undoing its side
effects.  Just mark it FIXME for now.

Cc: "Andreas Färber" <andreas.faerber@web.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-6-git-send-email-armbru@redhat.com>
2016-01-13 11:58:58 +01:00
Markus Armbruster
5a8de107e3 etraxfs_eth: Don't use hw_error() in init() method
Device init() methods aren't supposed to call hw_error(), they should
report the error and fail cleanly.  Do that.

Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1450370121-5768-5-git-send-email-armbru@redhat.com>
2016-01-13 11:58:58 +01:00
Markus Armbruster
b097e48121 arm_mptimer: Don't use hw_error() in realize() method
Device realize() methods aren't supposed to call hw_error(), they
should set an error and fail cleanly.  Do that.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1450370121-5768-4-git-send-email-armbru@redhat.com>
2016-01-13 11:58:58 +01:00
Markus Armbruster
84a3a53cf6 omap: Don't use hw_error() in device init() methods
Device init() methods aren't supposed to call hw_error(), they should
report the error and fail cleanly.  Do that.

The errors are all device misconfiguration.  All callers use
qdev_init_nofail(), so this patch merely converts hw_error() crashes
into &error_abort crashes.  Improvement, because now it crashes closer
to where the misconfiguration bug would be, and a few more bad
examples of hw_error() use are gone.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1450370121-5768-3-git-send-email-armbru@redhat.com>
2016-01-13 11:58:58 +01:00
Markus Armbruster
c525436e69 hw: Don't use hw_error() for machine initialization errors
Printing CPU registers is not helpful during machine initialization.
Moreover, these are straightforward configuration or "can get
resources" errors, so dumping core isn't appropriate either.  Replace
hw_error() by error_report(); exit(1).  Matches how we report these
errors in other machine initializations.

Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-2-git-send-email-armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-01-13 11:58:58 +01:00
Markus Armbruster
6231a6da9f hw: Inline the qdev_prop_set_drive_nofail() wrapper
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1449764955-10741-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-13 11:58:58 +01:00
Markus Armbruster
007b06578a Use error_fatal to simplify obvious fatal errors
Done with this Coccinelle semantic patch:

    @@
    type T;
    identifier FUN, RET;
    expression list ARGS;
    expression ERR, EC;
    @@
    (
    -    T RET = FUN(ARGS, &ERR);
    +    T RET = FUN(ARGS, &error_fatal);
    |
    -    RET = FUN(ARGS, &ERR);
    +    RET = FUN(ARGS, &error_fatal);
    |
    -    FUN(ARGS, &ERR);
    +    FUN(ARGS, &error_fatal);
    )
    -    if (ERR != NULL) {
    -        error_report_err(ERR);
    -        exit(EC);
    -    }

This is actually a more elegant version of my initial semantic patch
by courtesy of Eduardo.

It leaves dead Error * variables behind, cleaned up manually.

Cc: qemu-arm@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-01-13 11:58:58 +01:00
Markus Armbruster
8d780f4392 error: Document how to accumulate multiple errors
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447776349-2344-1-git-send-email-armbru@redhat.com>
2016-01-13 11:58:57 +01:00
Dr. David Alan Gilbert
c1bc66263c multithread decompression: Avoid one copy
qemu_get_buffer does a copy, we can avoid the memcpy, and
we can then remove the extra buffer.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-7-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13 16:03:01 +05:30
Dr. David Alan Gilbert
063e760a5f Use qemu_get_buffer_in_place for xbzrle data
Avoid a data copy (if we're lucky) in the xbzrle code.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-6-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13 16:02:37 +05:30
Dr. David Alan Gilbert
4addcd4fdc Migration: Emit event at start of pass
Emit an event each time we sync the dirty bitmap on the source;
this helps libvirt use postcopy by giving it a kick when it
might be a good idea to start the postcopy.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-5-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13 16:02:13 +05:30
Dr. David Alan Gilbert
6ba996bb45 Postcopy: Send events/change state on incoming side
I missed the calls to send migration events on the destination side
as we enter postcopy.
Take care when adding them not to do it after state has been freed.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-4-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13 16:02:06 +05:30
zhanghailiang
93d7af6ff0 migration: Add state records for migration incoming
For migration destination, we also need to know its state,
we will use it in COLO.

Here we add a new member 'state' for MigrationIncomingState,
and also use migrate_set_state() to modify its value.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>

dgilbert: Fixed early free of MigraitonIncomingState
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13 16:01:24 +05:30
zhanghailiang
48781e5bf2 migration: Export migrate_set_state()
Change the first parameter of migrate_set_state(), and export it.
We will use it in a later patch to update incoming state.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

dgilbert: Updated comment as per Juan's review
Message-Id: <1450266458-3178-2-git-send-email-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13 16:00:39 +05:30
Yi Min Zhao
88bfa2166a s390x/pci: return real state during listing PCI
At present, list_pci() shows all PCI devices as being in configured
state. As devices can be deconfigured by the guest, we need to show
the real configuration status instead.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-13 10:53:42 +01:00
Halil Pasic
1789f4e37c virtio-ccw: fix sanity check for vector
The commit 8dfbaa6ac ("virtio-ccw: introduce ccw specific queue limit")
did not touch the sanity check for the vector argument of the method
virtio_ccw_notify, despite intended as seen from
https://lists.nongnu.org/archive/html/qemu-devel/2015-04/msg02705.html
To be able to scale number of virtqueues using the constant this sanity
check needs to be altered.

Fixes: 8dfbaa6ac ("virtio-ccw: introduce ccw specific queue limit")
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-13 10:53:42 +01:00
Shmulik Ladkani
cf87e0a3ee s390: Introduce CCW_COMPAT_2_5
In 240240d5 'pc: Add pc-*-2.6 machine classes' HW_COMPAT_2_5 and
PC_COMPAT_2_5 were introduced.

Accordingly, introduce CCW_COMPAT_2_5 that uses HW_COMPAT_2_5.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1450899731-19517-1-git-send-email-shmulik.ladkani@ravellosystems.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-13 10:53:42 +01:00
Cornelia Huck
e11f463295 s390x/virtio: use qemu_check_nic_model()
Switching to the generally used interface changes the output of

s390x-softmmu/qemu-system-s390x -net nic,model=?

from

S390 only supports VirtIO nics

to the rather more useful

qemu: Supported NIC models: virtio

while still giving us a sensible error message for unsupported
models:

s390x-softmmu/qemu-system-s390x -net nic,model=foo
qemu-system-s390x: Unsupported NIC model: foo

Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-13 10:53:42 +01:00
Yi Min Zhao
de37b0b87f s390x/pci: code cleanup
Make use of the new FH_ENABLED define in existing code.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-13 10:53:42 +01:00
Yi Min Zhao
3be5c2078b s390x/pci: reject some operations to disabled PCI function
According to the s390 architecture, any mpcifc, pcilg, pcistg,
pcistb and rpcit instructions issued to disabled PCI functions
are rejected, and the instruction completes by setting condition
code 3. In addition, any DMA and MSIX interruption operations
are ignored.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-13 10:53:42 +01:00
Pierre Morel
7b3fdbd9a8 s390x: remove s390-virtio devices
The s390-virtio machine has been removed; remove the associated devices
as well.

hw/s390x/s390-virtio-bus.c and hw/s390x/s390-virtio-bus.h
have been deleted and removed from hw/s390x/Makefile.objs

virtio-size has no more meaning for the modern machine
and has been removed from helper.c and cpu.h

virtio-serial-s390 belonging to the old machine is
being removed from vl.c

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-13 10:53:42 +01:00
Pierre Morel
3538fb6f89 s390x: remove s390-virtio machine
Remove machine code for the s390-virtio machine, but keep functions
useful for the ccw machine.

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-13 10:53:41 +01:00
Cornelia Huck
b21b75981f s390x: add 2.6 compat machine
New qemu version, new machine.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-13 10:53:41 +01:00
Cao jin
d9eb0be229 virtio serial port: fix to incomplete QOMify
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1452068575-21543-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13 15:19:51 +05:30
Peter Maydell
649a1bbaf9 Merge remote-tracking branch 'remotes/kvaneesh/tags/for-upstream-signed' into staging
VirtFS update:

Cleanups mostly isolating virtio related details into separate files. This
is done to enable easy addition of Xen transport for VirtFS.

The changes include:

1. Rename a bunch of files and functions to make clear they are generic.
2. disentangle virtio transport code and generic 9pfs code.
3. Some function name clean-up.

# gpg: Signature made Tue 12 Jan 2016 06:04:35 GMT using RSA key ID 04C4E23A
# gpg: Good signature from "Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4846 9DE7 1860 360F A6E9  968C DE41 A4FE 04C4 E23A

* remotes/kvaneesh/tags/for-upstream-signed: (25 commits)
  9pfs: introduce V9fsVirtioState
  9pfs: factor out v9fs_device_{,un}realize_common
  9pfs: rename virtio-9p.c to 9p.c
  9pfs: rename virtio_9p_set_fd_limit to use v9fs_ prefix
  9pfs: move handle_9p_output and make it static function
  9pfs: export pdu_{submit,alloc,free}
  9pfs: factor out virtio_9p_push_and_notify
  9pfs: break out 9p.h from virtio-9p.h
  9pfs: break out virtio_init_iov_from_pdu
  9pfs: factor out pdu_push_and_notify
  9pfs: factor out virtio_pdu_{,un}marshal
  9pfs: make pdu_{,un}marshal proper functions
  9pfs: PDU processing functions should start pdu_ prefix
  9pfs: PDU processing functions don't need to take V9fsState as argument
  fsdev: rename virtio-9p-marshal.{c,h} to 9p-iov-marshal.{c,h}
  fsdev: break out 9p-marshal.{c,h} from virtio-9p-marshal.{c,h}
  9pfs: remove dead code
  9pfs: merge hw/virtio/virtio-9p.h into hw/9pfs/virtio-9p.h
  9pfs: rename virtio-9p-xattr{,-user}.{c,h} to 9p-xattr{,-user}.{c,h}
  9pfs: rename virtio-9p-synth.{c,h} to 9p-synth.{c,h}
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-12 17:37:22 +00:00
Peter Maydell
8acc216b95 disas/libvixl: Suppress gcc 4.6.3 sign-compare warnings
The VIXL code includes some equality comparisons between signed
and unsigned types. Modern gcc and clang do not complain about
these, but older versions of gcc such as gcc 4.6.3 do. Since
libvixl is an upstream library, the simplest approach is to
suppress the warnings by applying -Wno-sign-compare to the
relevant files.

(GCC 4.6 is not quite yet irrelevant for us; it is the gcc
shipped with Ubuntu Precise, for example, which is an LTS
release not yet out of its support period.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452604204-27202-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2016-01-12 16:45:45 +00:00
Peter Maydell
cf57c2f18b Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging
# gpg: Signature made Mon 11 Jan 2016 19:16:27 GMT using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"

* remotes/jnsnow/tags/ide-pull-request:
  libqos/ahci: organize header
  qtest/ahci: ATAPI data tests
  libqos/ahci: add ahci_exec
  libqos/ahci: allow nondata commands for ahci_io variants
  libqos: allow zero-size allocations
  libqos/ahci: Switch to mutable properties
  libqos/ahci: ATAPI identify
  libqos/ahci: ATAPI support
  ahci-test: fix memory leak
  ide: ahci: reset ncq object to unused on error
  macio: fix overflow in lba to offset conversion for ATAPI devices

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-12 10:38:08 +00:00
Wei Liu
00588a0aa2 9pfs: introduce V9fsVirtioState
V9fsState now only contains generic fields. Introduce V9fsVirtioState
for virtio transport.  Change virtio-pci and virtio-ccw to use
V9fsVirtioState.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-12 11:04:14 +05:30
John Snow
c5620e658e libqos/ahci: organize header
Organize the prototypes into nice little sections.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-10-git-send-email-jsnow@redhat.com
2016-01-11 14:10:44 -05:00
John Snow
e8109694c7 qtest/ahci: ATAPI data tests
Simple I/O tests for DMA and PIO pathways in the AHCI HBA.

I believe at this point in time all of the common, major IO pathways
in BMDMA and AHCI are covered by qtests now.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-9-git-send-email-jsnow@redhat.com
2016-01-11 14:10:43 -05:00
John Snow
9350df7cea libqos/ahci: add ahci_exec
add ahci_exec, which is a standard purpose flexible command dispatcher
and tester for the AHCI device. The intent is to eventually cut down on
the absurd amount of boilerplate inside of the AHCI qtest.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-8-git-send-email-jsnow@redhat.com
2016-01-11 14:10:43 -05:00
John Snow
b682d3a7cf libqos/ahci: allow nondata commands for ahci_io variants
These variants try to set a data offset, even if you don't specify one.
In the cases where the offset is zero and it's a nondata command, just
ignore the instruction.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-7-git-send-email-jsnow@redhat.com
2016-01-11 14:10:43 -05:00
John Snow
b1b66c3b5e libqos: allow zero-size allocations
As part of streamlining the AHCI tests interface, it'd be nice
if specying a size of zero could be handled without special branches
and the allocator could handle this special case gracefully.

This lets me use the "ahci_io" macros for non-data commands, too,
which moves me forward towards shepherding all AHCI qtests into
a common set of commands in a unified pipeline.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-6-git-send-email-jsnow@redhat.com
2016-01-11 14:10:43 -05:00
John Snow
b88641e236 libqos/ahci: Switch to mutable properties
ATAPI commands are, unfortunately, weird in that they can
be either DMA or PIO depending on a header bit. In order to
accommodate them, I'll need to make AHCI command properties
mutable so we can toggle between which "flavor" of ATAPI command
we want to test.

The default ATAPI transfer mechanism is PIO and the default
properties are adjusted accordingly.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-5-git-send-email-jsnow@redhat.com
2016-01-11 14:10:43 -05:00
John Snow
d0b282a58c libqos/ahci: ATAPI identify
We need to say "hello!" to our ATAPI friends
in a slightly different manner.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-4-git-send-email-jsnow@redhat.com
2016-01-11 14:10:42 -05:00
John Snow
54d268b26a libqos/ahci: ATAPI support
Add pathways to tolerate ATAPI commands.

Notably, unlike ATA, each SCSI command's layout is a little different,
so support will have to be patched in for each command as we want to
test them in e.g. ahci_command_set_sizes and ahci_command_set_offset.

For now, I'm adding support for 0x28, READ (10).

[Maintainer edit: replaced type-punning with stl_be_p(). --js]

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-3-git-send-email-jsnow@redhat.com
2016-01-11 14:10:42 -05:00
John Snow
248de4a899 ahci-test: fix memory leak
Use the proper free command to detroy an AHCICommand.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-2-git-send-email-jsnow@redhat.com
2016-01-11 14:10:42 -05:00
Prasad J Pandit
4ab0359a8a ide: ahci: reset ncq object to unused on error
When processing NCQ commands, AHCI device emulation prepares a
NCQ transfer object; To which an aio control block(aiocb) object
is assigned in 'execute_ncq_command'. In case, when the NCQ
command is invalid, the 'aiocb' object is not assigned, and NCQ
transfer object is left as 'used'. This leads to a use after
free kind of error in 'bdrv_aio_cancel_async' via 'ahci_reset_port'.
Reset NCQ transfer object to 'unused' to avoid it.

[Maintainer edit: s/ACHI/AHCI/ in the commit message. --js]

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1452282511-4116-1-git-send-email-ppandit@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2016-01-11 14:10:42 -05:00
Mark Cave-Ayland
97225170f6 macio: fix overflow in lba to offset conversion for ATAPI devices
As the IDEState lba field is an int32_t, make sure we cast to int64_t before
shifting to calculate the offset. Otherwise we end up with an overflow when
trying to access sectors beyond 2GB as can occur when using DVD images.

[Maintainer edit: fixed extraneous parentheses. --js]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1451928613-29476-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
2016-01-11 14:10:42 -05:00
Peter Maydell
7b8a354d47 Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160111-1' into staging
target-arm queue:
 * i.MX: move i.MX31 CCM object to register array
 * xilinx_axidma: remove dead code
 * disas/libvixl: Update to upstream VIXL 1.12
 * virt: Support legacy -nic command line syntax

# gpg: Signature made Mon 11 Jan 2016 16:05:58 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160111-1:
  hw/arm/virt: Support legacy -nic command line syntax
  disas/libvixl: Update to upstream VIXL 1.12
  hw/dma/xilinx_axidma: remove dead code
  i.MX: move i.MX31 CCM object to register array

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 16:09:50 +00:00
Ashok Kumar
fea9b3ca9c hw/arm/virt: Support legacy -nic command line syntax
Support the legacy -nic syntax for creating PCI network devices
as well as the new-style -device options. This makes life easier
for people moving from x86 KVM virtualization to ARM KVM virtualization
and expecting their network configuration options to work the same
way for both setups.

We use "virtio" as the default NIC model if the user doesn't specify one.

Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Message-id: 1452091659-17698-1-git-send-email-ashoks@broadcom.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expanded and clarified commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 16:04:50 +00:00
Peter Maydell
5de6f3c0f4 disas/libvixl: Update to upstream VIXL 1.12
Update our copy of libvixl to upstream's 1.12 release.
The major benefit from QEMU's point of view is that some instructions
previously disassembled as "unimplemented (System)" are now displayed
as something more useful. It also fixes some warnings about format
strings that newer w64-mingw32 compilers were emitting.

We didn't have any local changes to libvixl so nothing needed
to be forward-ported.

Although this is a large commit (due to upstream renaming most
of the files), only a few of the files changed in this commit
are not just straight copies of upstream libvixl files:
 disas/arm-a64.cc
 disas/libvixl/Makefile.objs
 disas/libvixl/README

Note that this commit introduces some signed-unsigned comparison
warnings on the old mingw compilers. Those compilers have broken
TLS support anyway so have only ever been much use for compile tests;
anybody still using them should add -Wno-sign-compare to their
--extra-cflags.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 16:04:50 +00:00
Andrew Jones
b3d21a04b8 hw/dma/xilinx_axidma: remove dead code
stream_desc_show() (and DEBUG_ENET) appear to be unused, as the
function isn't compilable (there are broken PRI format strings).

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1452084792-17424-1-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 15:52:18 +00:00
Jean-Christophe DUBOIS
fea01f9604 i.MX: move i.MX31 CCM object to register array
With this i.MX25 and i.MX31 will have closer implementations.

Moreover all i.MX31 CCM registers are now present.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 15:52:18 +00:00
Peter Maydell
ac0d9dbf33 Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160111' into staging
January 2016 Linux-user queque

# gpg: Signature made Mon 11 Jan 2016 14:13:57 GMT using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg:                 aka "Riku Voipio <riku.voipio@linaro.org>"

* remotes/riku/tags/pull-linux-user-20160111:
  linux-user/mmap.c: Use end instead of real_end in target_mmap
  linux-user: Add SOCKOP_sendmmsg and SOCKOP_recvmmsg socket call, wire them up.
  linux-user: Update m68k syscall definitions to match Linux 4.4.
  linux-user/syscall.c: Use SOL_SOCKET instead of level for setsockopt()
  linux-user: enable sigaltstack for all architectures
  unicore32: convert get_sp_from_cpustate from macro to inline
  linux-user/mmap.c: Always zero MAP_ANONYMOUS memory in mmap_frag()
  linux-user,sh4: fix signal retcode address
  linux-user: check fd is >= 0 in fd_trans_host_to_target_data/fd_trans_host_to_target_addr
  linux-user: manage bind with a socket of SOCK_PACKET type.
  linux-user: add a function hook to translate sockaddr
  linux-user: rename TargetFdFunc to TargetFdDataFunc, and structure fields accordingly
  linux-user: SOCK_PACKET uses network endian to encode protocol in socket()
  linux-user/syscall.c: malloc()/calloc() to g_malloc()/g_try_malloc()/g_new0()
  linux-user: in poll(), if nfds is 0, pfd can be NULL
  linux-user: correctly align target_epoll_event
  linux-user: add signalfd/signalfd4 syscalls

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 14:22:04 +00:00
Chen Gang
530c003252 linux-user/mmap.c: Use end instead of real_end in target_mmap
The fragment must effectively be mapped only to "end" not to "real_end"
(which is a host page aligned address, and thus this is not a fragment).
It is consistent with what it is done in the case of one single page.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-11 15:01:47 +02:00
Peter Maydell
692a5519ab Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2016-01-11' into staging
trivial patches for 2016-01-11

# gpg: Signature made Mon 11 Jan 2016 08:39:32 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2016-01-11:
  hw/s390x: Remove superfluous return statements
  hw/core/qdev: Remove superfluous return statement
  hw/acpi: Remove superfluous return statement
  hw/ide: Remove superfluous return statements
  osdep.h: Include glib-compat.h in osdep.h rather than qemu-common.h
  scripts/checkpatch.pl: Don't allow special cases of unspaced operators
  PCI Bonito: QOMify and cleanup
  SH PCI Host: convert to realize()
  gt64120: convert to realize()
  Add missing syscall nrs. according to more recent Linux kernels
  hw/misc/edu: Convert to realize()
  configure: fix trace backend check
  xen/Makefile.objs: simplify
  crypto: Fix typo in example
  MAINTAINERS: Add the correct device_tree.h file
  iscsi: fix readcapacity error message
  net: convert qemu_log to error_report, fix message
  linux-user: enable sigaltstack for all architectures
  unicore32: convert get_sp_from_cpustate from macro to inline

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 12:56:58 +00:00
John Paul Adrian Glaubitz
5a53dc5042 linux-user: Add SOCKOP_sendmmsg and SOCKOP_recvmmsg socket call, wire them up.
Adds the definitions for the socket calls SOCKOP_sendmmsg
and SOCKOP_recvmmsg and wires them up with the rest of the code.
The necessary function do_sendrecvmmsg() is already present in
linux-user/syscall.c. After adding these two definitions and wiring
them up, I no longer receive an error message about the
unimplemented socket calls when running "apt-get update" on Debian
unstable running on qemu with glibc_2.21 on m68k.

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-11 14:54:03 +02:00
John Paul Adrian Glaubitz
e73eecbdc2 linux-user: Update m68k syscall definitions to match Linux 4.4.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-11 14:53:01 +02:00
Peter Maydell
cc06ca4c97 Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 11 Jan 2016 05:22:16 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request: (24 commits)
  ether/slirp: Avoid redefinition of the same constants
  l2tpv3: fix cookie decoding
  net: ne2000: fix bounds check in ioport operations
  net: rocker: fix an incorrect array bounds check
  vmxnet3: Introduce 'x-disable-pcie' back-compat property
  vmxnet3: Report the Device Serial Number capability
  vmxnet3: The vmxnet3 device is a PCIE endpoint
  vmxnet3: coding: Introduce VMXNET3Class
  vmxnet3: Introduce 'x-old-msi-offsets' back-compat property
  vmxnet3: Change the offset of the MSIX PBA table
  vmxnet3: Change offsets of msi/msix pci capabilities
  net/filter: fix nf->netdev_id leak
  net/dump: fix nfds->filename leak
  net/vmxnet3: rename VMXNET3_DEVICE_VERSION to VMXNET3_UPT_REVISION
  net/vmxnet3: return 0 on unknown command
  net/vmxnet3: return correct value for VMXNET3_CMD_GET_DEV_EXTRA_INFO
  net/vmxnet3: return correct value for VMXNET3_CMD_GET_DID_* command
  net/vmxnet3: return 1 on device activation failure
  MAINTAINERS: Add an entry for the net/slirp.c file
  net: vmxnet3: avoid memory leakage in activate_device
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 12:30:02 +00:00
Peter Maydell
10e1b75961 Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160111' into staging
ppc patch queue 2016-01-11

Biggest content is a thorough cleanups of spapr machine type handling.
Also contains several other minor cleanups, bugfixes and extensions.

# gpg: Signature made Mon 11 Jan 2016 04:34:38 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.6-20160111:
  hw/ppc/spapr: fix spapr->kvm_type leak
  spapr vio: fix to incomplete QOMify
  hw/ppc/spapr: Use XHCI as host controller for new spapr machines
  pseries: Add pseries-2.6 machine type
  pseries: Improve setting of default machine version
  pseries: Restructure class_options functions
  pseries: DEFINE_SPAPR_MACHINE
  pseries: Use SET_MACHINE_COMPAT
  Move SET_MACHINE_COMPAT macro to boards.h
  pseries: Remove versions from mc->desc
  pseries: Remove redundant calls to spapr_machine_initfn()
  pseries: Rearrange versioned machine type code
  pseries: Remove redundant setting of mc->name for pseries-2.5 machine
  spapr: Add /system-id
  target-ppc: Define kvmppc_read_int_dt()
  hw/ppc/spapr_rtc: Remove bad class_size value

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 11:57:53 +00:00
Chen Gang
fad6c58a3d linux-user/syscall.c: Use SOL_SOCKET instead of level for setsockopt()
In this case, level is TARGET_SOL_SOCKET, but we need SOL_SOCKET for
setsockopt().

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-11 13:45:23 +02:00
Peter Maydell
d21ccd7bb9 Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi dsdt rework, misc fixes

This completes the dsdt rewrite, and includes misc fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sat 09 Jan 2016 21:20:34 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (59 commits)
  virtio: fix error message for number of queues
  ivshmem: Store file descriptor for vhost-user negotiation
  migration/virtio: Remove simple .get/.put use
  Add VMSTATE_STRUCT_VARRAY_KNOWN
  i386/pc: expose identifying the floppy controller
  pc: acpi: remove unused ASL templates and related blobs/utils
  pc: acpi: switch to AML API composed DSDT
  pc: acpi: q35: PCST, PCSB opregions and PCIB field into SSDT
  pc: acpi: q35: move PCI0 device definition into SSDT
  pc: acpi: q35: move PCI0._OSC() method into SSDT
  pc: acpi: q35: move _PIC() method into SSDT
  pc: acpi: q35: move PRTP routing table into SSDT
  pc: acpi: q35: move PRTA routing table into SSDT
  pc: acpi: q35: move _PRT() into SSDT
  pc: acpi: q35: move ISA bridge into SSDT
  pc: acpi: q35: move IQST() into SSDT
  pc: acpi: q35: move IQCR() into SSDT
  pc: acpi: q35: move link devices to SSDT
  pc: acpi: q35: move GSI links to SSDT
  pc: acpi: piix4: acpi move PCI0 device to SSDT
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 11:19:05 +00:00
Thomas Huth
fe02fc5209 hw/s390x: Remove superfluous return statements
The "return;" statements at the end of functions do not make
much sense, so let's remove them.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Thomas Huth
1063477834 hw/core/qdev: Remove superfluous return statement
The "return;" statement at the end of device_set_realized()
does not make much sense, so let's remove it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Thomas Huth
ff433bbb82 hw/acpi: Remove superfluous return statement
The "return;" statement at the end of acpi_memory_plug_cb()
does not make much sense, so let's remove it.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Thomas Huth
4e6f7cfbf9 hw/ide: Remove superfluous return statements
The "return;" statements at the end of functions do not make
much sense, so let's remove them.

Cc: qemu-block@nongnu.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Peter Maydell
529490e5d6 osdep.h: Include glib-compat.h in osdep.h rather than qemu-common.h
Our use of glib is now pervasive across QEMU. Move the include of glib-compat.h
from qemu-common.h to osdep.h so that it is more widely accessible and doesn't
get forgotten by accident. (Failure to include it will result in build failure
on old versions of glib which is likely to be unnoticed by most developers.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Peter Maydell
8f32510f1c scripts/checkpatch.pl: Don't allow special cases of unspaced operators
The checkpatch.pl script has a special case to permit the following
operators to have no spaces around them:
 <<  >>  &  ^  |  +  -  *  /  %

QEMU style prefers all operators to consistently have spacing around
them, so remove this special case handling. This avoids reviewers
having to manually note it during code review.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Cao jin
a2a645d967 PCI Bonito: QOMify and cleanup
Also clear the code

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Cao jin
9f23b27d0d SH PCI Host: convert to realize()
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Cao jin
b429d363ed gt64120: convert to realize()
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Johan Ouwerkerk
9763af08f8 Add missing syscall nrs. according to more recent Linux kernels
This change covers arm, aarch64, mips. Others to follow?

The change was prompted by QEMU warning about a syscall 384 (get_random())
with Debian armhf binaries (ARMv7).

Signed-off-by: Johan Ouwerkerk <jm.ouwerkerk@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Cao jin
f922254c87 hw/misc/edu: Convert to realize()
for educational PCI device

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Marc-André Lureau
713572a7b5 configure: fix trace backend check
Found thanks to shellcheck!

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Cao jin
66c058cb69 xen/Makefile.objs: simplify
merge last two lines, keep alphabetic order.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Eric Blake
b3afe33526 crypto: Fix typo in example
The example code wouldn't even compile, since it did not use
a consistent spelling for the Error ** parameter.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Thomas Huth
82407515fe MAINTAINERS: Add the correct device_tree.h file
device_tree.h is not in the main directory, but under
include/sysemu/ nowadays.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Zhu Lingshan
240125bc49 iscsi: fix readcapacity error message
fix:The error message for readcapacity 16 incorrectly mentioned
a readcapacity 10 failure, fixed the error message.

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Paolo Bonzini
34f22fc034 net: convert qemu_log to error_report, fix message
Ensure that the error is printed with the proper timestamp.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Michael Tokarev
477cea9e6d linux-user: enable sigaltstack for all architectures
There is no reason to limit sigaltstack syscall to just a few
architectures and pretend it is not implemented for others.

If some architecture is not ready for this, that architecture
should be fixed instead.

This fixes LP#1516408.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 11:39:13 +03:00
David Gibson
87bbdd9caf hw/ppc/spapr: fix spapr->kvm_type leak
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
[fixed return type of spapr_machine_finalizefn()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-11 15:29:05 +11:00
Cao jin
215e209846 spapr vio: fix to incomplete QOMify
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-11 15:29:05 +11:00
Thomas Huth
57040d4513 hw/ppc/spapr: Use XHCI as host controller for new spapr machines
The OHCI has some bugs and performance issues, so for
newer machines it's preferable to use XHCI instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-11 15:29:05 +11:00
David Gibson
4b23699c82 pseries: Add pseries-2.6 machine type
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-11 15:29:05 +11:00
David Gibson
fccbc78500 pseries: Improve setting of default machine version
This tweaks the way the default machine version is controlled, so that
there will be a bit less churn when each new version is introduced.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-11 15:29:05 +11:00
David Gibson
fc9f38c3c0 pseries: Restructure class_options functions
Currently each of the *_class_options() functions for the pseries-2.1 ..
pseries-2.5 machine types are standalone.  This will become harder to
maintain as new versions are added.

This patch restructures them similarly to x86 where each function calls
the one from the next version, then overrides anything necessary for
compatibility with the specific version and older.

The default behaviour - that for the most recent machine are set up in
the base class initializer spapr_machine_class_init().  Previously it had
some things set up to default to older behaviour with the more recent
machines overriding it.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-11 15:29:05 +11:00
David Gibson
5013c54746 pseries: DEFINE_SPAPR_MACHINE
At the moment all the class_init functions and TypeInfo structures for the
various versioned pseries machine types are open-coded.  As more versions
are created this is getting increasingly clumsy.

This patch borrows the approach used in PC, using a DEFINE_SPAPR_MACHINE()
macro to construct most of the boilerplate from simpler 'class_options' and
'instance_options' functions.

This patch makes a small semantic change - the versioned machine types are
now registered through machine_init() instead of type_init().  Since the
new way is how PC already did it, I'm assuming that's correct.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-11 15:29:05 +11:00
David Gibson
f949b4e5f5 pseries: Use SET_MACHINE_COMPAT
To make the spapr_machine_*_class_init() functions a little less bulky.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-11 15:29:05 +11:00
David Gibson
877f8931b9 Move SET_MACHINE_COMPAT macro to boards.h
pc.h defines a SET_MACHINE_COMPAT macro to make setting up compat_props
for the various PC machine versions less verbose.  There's nothing
inherently PC specific about it, though, so move it to boards.h where other
versioned machine types (like pseries-*) can use it.

While we're doing that, change it's indentation to be a bit more regular.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-11 15:29:05 +11:00
David Gibson
0eb9054c60 pseries: Remove versions from mc->desc
Currently, the versioned spapr machine types put the machine type version
into the description string.  PC does not do this, using just the name
itself to distinguish.  Doing the same lets us move setting the description
into the common base class, simplifying the code slightly.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-11 15:29:05 +11:00
David Gibson
64f0f70a00 pseries: Remove redundant calls to spapr_machine_initfn()
The instance_init() functions for several of the pseries-x.y versioned
machine types explicitly call spapr_machine_initfn().  But that's the
instance_init function for the common parent of all those machine types,
so will already have been called beforehand by the QOM infrastructure.

Remove the redundant calls.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-11 15:29:05 +11:00
David Gibson
1c5f29bbc8 pseries: Rearrange versioned machine type code
hw/ppc/spapr.c has a number of definitions related to the various versioned
machine types ("pseries-2.1" .. "pseries-2.5") it defines.  These are
mostly arranged by type of function first, then machine version second, and
it's not consistent about whether it goes in increasing or decreasing
version order.

This rearranges the code to keep all the definitions for a particular
machine version together, and arrange then consistently in order most
recent to least recent.

This brings us closer to matching the way PC does things, and makes later
cleanups easier to follow.

Apart from adding some comments marking each section, this is a pure
mechanical rearrangement with no semantic changes.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-11 15:29:04 +11:00
David Gibson
aec39c5349 pseries: Remove redundant setting of mc->name for pseries-2.5 machine
98cec76 "machine: Set MachineClass::name automatically" removed the setting
of mc->name for the pseries machine types, since it can be derived
automatically from the type names constructed with MACHINE_TYPE_NAME().

Unfortunately fb0fc8f "spapr: Create pseries-2.5 machine" went in later and
brought one of them back.

This removes it again.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-01-11 15:29:04 +11:00
Alexey Kardashevskiy
3dc0a66d26 spapr: Add /system-id
Section B.6.2.1 Root Node Properties of PAPR specification defines
a set of properties which shall be present in the device tree root,
one of these properties is "system-id" which "should be unique across
all systems and all manufacturers". Since UUID is meant to be unique,
it makes sense to use it as "system-id".

This adds "system-id" property to the device tree root when not empty.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-11 15:29:04 +11:00
Sukadev Bhattiprolu
7d94a30b54 target-ppc: Define kvmppc_read_int_dt()
Extract code from the function kvmppc_read_int_cpu_dt() that actually
reads the file into a separate function, so it can be called from
other places.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-11 15:28:49 +11:00
Dr. David Alan Gilbert
9c7ffe2664 ether/slirp: Avoid redefinition of the same constants
eth.h and slirp.h both define ETH_ALEN and ETH_P_IP
rtl8139.c and eth.h both define ETH_HLEN

Move the related constant (ETH_P_ARP) from slirp.h to eth.h, and
remove the duplicates; make slirp.h include eth.h

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:35 +08:00
Alexis Dambricourt
3be9b3528d l2tpv3: fix cookie decoding
If a 32 bits l2tpv3 frame cookie MSB if set to 1, the cast to uint64_t
cookie will spread 1 to the four most significant bytes.
Then the condition (cookie != s->rx_cookie) becomes false.

Signed-off-by: Alexis Dambricourt <alexis.dambricourt@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:35 +08:00
Prasad J Pandit
aa7f9966df net: ne2000: fix bounds check in ioport operations
While doing ioport r/w operations, ne2000 device emulation suffers
from OOB r/w errors. Update respective array bounds check to avoid
OOB access.

Reported-by: Ling Liu <liuling-it@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:35 +08:00
Prasad J Pandit
007cd223de net: rocker: fix an incorrect array bounds check
While processing transmit(tx) descriptors in 'tx_consume' routine
the switch emulator suffers from an off-by-one error, if a
descriptor was to have more than allowed(ROCKER_TX_FRAGS_MAX=16)
fragments. Fix an incorrect bounds check to avoid it.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:35 +08:00
Shmulik Ladkani
7d6d347d06 vmxnet3: Introduce 'x-disable-pcie' back-compat property
Following the previous patch which changed vmxnet3 to be a pci express
device, this patch introduces a boolean property 'x-disable-pcie' whose
default is false.

Setting 'x-disable-pcie' to 'on' preserves the old 'pci device' (non
express) behavior. This allows migration to older versions.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:35 +08:00
Shmulik Ladkani
3509866ab3 vmxnet3: Report the Device Serial Number capability
Report the DSN extended PCI capability at 0x100.
DSN value is a transformation of device MAC address, as calculated
by VMware virtual hardware.

DSN is reported only if device is pcie.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:35 +08:00
Shmulik Ladkani
f713d4d2f1 vmxnet3: The vmxnet3 device is a PCIE endpoint
Report the 'express endpoint' capability if on a PCIE bus.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:35 +08:00
Shmulik Ladkani
b79f17a9bc vmxnet3: coding: Introduce VMXNET3Class
Introduce a class type for vmxnet3, and the usual
DEVICE_CLASS/DEVICE_GET_CLASS macros.

No semantic change.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Shmulik Ladkani
b22e0aef46 vmxnet3: Introduce 'x-old-msi-offsets' back-compat property
Following the previous patches, where vmxnet3's pci's msi/msix
capability offsets and msix's PBA table offsets have been changed, this
patch introduces a boolean property 'x-old-msi-offsets' to vmxnet3,
whose default is false.

Setting 'x-old-msi-offsets' to 'on' preserves the old offsets behavior,
which allows migration to older versions.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Shmulik Ladkani
9c087a0504 vmxnet3: Change the offset of the MSIX PBA table
Place the PBA table at 0x1000, as placed by VMware virtual hardware.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Shmulik Ladkani
f9262dae13 vmxnet3: Change offsets of msi/msix pci capabilities
Place device reported PCI capabilities at the same offsets as placed by
the VMware virtual hardware: MSI at [84], MSI-X at [9c].

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Li Zhijian
671f66f87f net/filter: fix nf->netdev_id leak
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Li Zhijian
b50c7d452f net/dump: fix nfds->filename leak
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Miao Yan
c12d82ef15 net/vmxnet3: rename VMXNET3_DEVICE_VERSION to VMXNET3_UPT_REVISION
VMXNET3_DEVICE_VERSION is used as return value for accessing
UPT Revision Report and Selection register. So rename it
to VMXNET3_UPT_REVISION.

Signed-off-by: Miao Yan <yanmiaoebest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Miao Yan
8856be1512 net/vmxnet3: return 0 on unknown command
Return 0 on unknown command, this is what esxi (5.x+) behaves.

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Miao Yan
5ae3e91c35 net/vmxnet3: return correct value for VMXNET3_CMD_GET_DEV_EXTRA_INFO
VMXNET3_CMD_GET_DEV_EXTRA_INFO should return 0 for emulation
mode

This behavior can be observed by the following steps:

1) run a Linux distro on esxi server (5.x+)
2) modify vmxnet3 Linux driver to read the register:

  VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_DEV_EXTRA_INFO);
  ret =  VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
  pr_info("vmxnet3 dev_info: 0x%x\n", ret);

The kernel log will have some like the following message:

  [ 7005.111170] vmxnet3 dev_info: 0x0

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Miao Yan
c469669ef7 net/vmxnet3: return correct value for VMXNET3_CMD_GET_DID_* command
VMXNET3_CMD_GET_DID_LO should return PCI ID of the device
and VMXNET3_CMD_GET_DID_HI should return vmxnet3 revision ID.

This behavior can be observed by the following steps:

1) run a Linux distro on esxi server (5.x+)
2) modify vmxnet3 Linux driver to read DID_HI and DID_LO:

  VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_DID_LO);
  lo =  VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);

  VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_DID_HI);
  high =  VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
  pr_info("vmxnet3 DID lo: 0x%x, high: 0x%x\n", lo, high);

The kernel log will have something like the following message:

  [ 7005.111170] vmxnet3 DID lo: 0x7b0, high: 0x1

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Miao Yan
fde58177aa net/vmxnet3: return 1 on device activation failure
When reading device status, 0 means device is successfully
activated and 1 means error.

This behavior can be observed by the following steps:

1) run a Linux distro on esxi server (5.5+)
2) modify vmxnet3 Linux driver to give it an invalid
   address to 'adapter->shared_pa' which is the
   shared memory for guest/host communication

This will trigger device activation failure and kernel
log will have the following message:

   [ 7138.403256] vmxnet3 0000:03:00.0 eth1: Failed to activate dev: error 1

So return 1 on device activation failure instead of -1;

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Thomas Huth
663fb1e172 MAINTAINERS: Add an entry for the net/slirp.c file
The file net/slirp.c should be listed in the SLIRP section, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
P J P
aa4a3dce1c net: vmxnet3: avoid memory leakage in activate_device
Vmxnet3 device emulator does not check if the device is active
before activating it, also it did not free the transmit & receive
buffers while deactivating the device, thus resulting in memory
leakage on the host. This patch fixes both these issues to avoid
host memory leakage.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Miao Yan
dd3c168471 net/vmxnet3: remove redundant VMW_SHPRN(...) definition
Macro VMW_SHPRN(...) is already defined vmxnet3_debug.h,
so remove the duplication

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Miao Yan
71c2f5b9b3 net/vmxnet3: fix debug macro pattern for vmxnet3
Vmxnet3 uses the following debug macro style:

 #ifdef SOME_DEBUG
 #  define debug(...) do{ printf(...); } while (0)
 # else
 #  define debug(...) do{ } while (0)
 #endif

If SOME_DEBUG is undefined, then format string inside the
debug macro will never be checked by compiler. Code is
likely to break in the future when SOME_DEBUG is enabled
 because of lack of testing. This patch changes this
to the following:

 #define debug(...) \
  do { if (SOME_DEBUG_ENABLED) printf(...); } while (0)

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Miao Yan
2e4ca7dbc1 net/vmxnet3: use %zu for size_t in printf
Use %zu specifier for size_t in printf, otherwise build would fail
on platforms where size_t is not unsigned long

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:34 +08:00
Miao Yan
938cdfefee net/vmxnet3: fix a build error when enabling debug output
Macro MAC_FMT and MAC_ARG are not defined, but used in vmxnet3_net_init().
This will cause build error when debug level is raised in
vmxnet3_debug.h (enable all VMXNET3_DEBUG_xxx).

Use VMXNET_MF and VXMNET_MA instead.

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:32 +08:00
Thomas Huth
54c6de864f hw/ppc/spapr_rtc: Remove bad class_size value
class_size = sizeof(XICSStateClass) does not make much sense
in the RTC code and likely was just a copy-n-paste error.
Let's simply remove it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-11 13:25:40 +11:00
Michael Tokarev
6e50216461 unicore32: convert get_sp_from_cpustate from macro to inline
All other architectures define get_sp_from_cpustate as an inline function,
only unicore32 uses a #define.  With this, some usages are impossible, for
example, enabling sigaltstack in linux-user/syscall.c results in

linux-user/syscall.c: In function ‘do_syscall’:
linux-user/syscall.c:8299:39: error: dereferencing ‘void *’ pointer [-Werror]
  get_sp_from_cpustate(arg1, arg2, get_sp_from_cpustate((CPUArchState *)cpu_env));
                                       ^
linux-user/syscall.c:8299:39: error: request for member ‘regs’ in something not a structure or union

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-10 10:25:38 +03:00
Cornelia Huck
8a1be662a6 virtio: fix error message for number of queues
There's no such thing as "PCI queues" in the virtio core.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:20 +02:00
Tetsuya Mukawa
56a571d9c8 ivshmem: Store file descriptor for vhost-user negotiation
If virtio-net driver allocates memory in ivshmem shared memory,
vhost-net will work correctly, but vhost-user will not work because
a fd of shared memory will not be sent to vhost-user backend.
This patch fixes ivshmem to store file descriptor of shared memory.
It will be used when vhost-user negotiates vhost-user backend.

Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:20 +02:00
Dr. David Alan Gilbert
50e5ae4dc3 migration/virtio: Remove simple .get/.put use
The 'virtqueue_state' and 'ringsize' can be saved using VMSTATE
macros rather than hand coded .get/.put

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
2016-01-09 23:20:20 +02:00
Dr. David Alan Gilbert
2cf0148674 Add VMSTATE_STRUCT_VARRAY_KNOWN
At the moment we have VMSTATE_STRUCT_ARRAY that requires
the field is declared as an array of fixed size.
We also have VMSTATE_STRUCT_VARRAY_UINT* that allows
a field declared as a pointer, but requires that the length
is a field member in the structure being loaded/saved.

VMSTATE_STRUCT_VARRAY_KNOWN is for arrays defined as pointers
yet we somehow know the length of.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
2016-01-09 23:20:20 +02:00
Roman Kagan
424e4a87d2 i386/pc: expose identifying the floppy controller
Factor out and expose the function to locate the floppy controller in
the system.
It will allow to dynamically populate the relevant objects in the ACPI
tables.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:20 +02:00
Igor Mammedov
9fc6502606 pc: acpi: remove unused ASL templates and related blobs/utils
QEMU now uses internally composed DSDT so drop now
empty *.dsl templates and related *.generated
binary blobs.

Also since templates are not used anymore/obolete
remove utility scripts used for extracting/patching
AML blobs compiled by IASL and for updating them
in git tree.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
3db119da79 pc: acpi: switch to AML API composed DSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
9e4afc0995 pc: acpi: q35: PCST, PCSB opregions and PCIB field into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
afa06e1828 pc: acpi: q35: move PCI0 device definition into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
f97a88a85e pc: acpi: q35: move PCI0._OSC() method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
e9fce79861 pc: acpi: q35: move _PIC() method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
65aef4de5e pc: acpi: q35: move PRTP routing table into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
22b5b8bf31 pc: acpi: q35: move PRTA routing table into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
0dafe3b336 pc: acpi: q35: move _PRT() into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
41f95a5200 pc: acpi: q35: move ISA bridge into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
78e1ad0509 pc: acpi: q35: move IQST() into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
16682a9d86 pc: acpi: q35: move IQCR() into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
12e3b1f750 pc: acpi: q35: move link devices to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
80b32df529 pc: acpi: q35: move GSI links to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
32b9741f50 pc: acpi: piix4: acpi move PCI0 device to SSDT
leave Scope(\_SB) definition in DSDT so that iasl
would be able to compile DSDT since we are still
need definition block for table.
After Q35 ASL is converted, DSDT templates will
be completly replaced by AML API generated tables.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:19 +02:00
Igor Mammedov
b616ec4d6f pc: acpi: piix4: move remaining PCI hotplug bits into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
196e213783 pc: acpi: piix4: move PCI0._PRT() into SSDT
PCI routing table for expander buses is build with help
of build_prt() using AML API. And it's almost the same
as PRT for PCI0 bus except of power-management device.
So make existing build_prt() build PRT table for PCI0
bus as well.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
06989b8861 pc: acpi: piix4: move IQST() into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
100681ccf1 pc: acpi: piix4: move IQCR() into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
c35b6e8032 pc: acpi: pci: move link devices into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
4c5eebc1fa pc: acpi: move remaining GPE handlers into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
e4db279804 pc: acpi: move PIIX4 isa-bridge and pm devices into SSDT
and also move PRQx fields declaration as it can't be
split out into separate patch since fields use
PCI0.ISA.P40C operation region and OperationRegion
must be declared in the same table as a Field that
uses it. If this condition is not statisfied Windows
will BSOD ans IASL (make check) will error out as well.

For the same reason pm is moved together with isa-bridge
as the later refernces P13C OperationRegion from pm device.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
28f1f0e929 pc: acpi: move COM devices from DSDT to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
8b1da5f8fd pc: acpi: move LPT device from DSDT to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
95ed7e97e4 pc: acpi: move FDC0 device from DSDT to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
c355cb2c0f pc: acpi: move MOU device from DSDT to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
f58190e2c2 pc: acpi: move KBD device from DSDT to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
ee13584996 pc: acpi: move RTC device from DSDT to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
3892a2b741 pc: acpi: move DBUG() from DSDT to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
a57d708d17 pc: acpi: move HPET from DSDT to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
5ca5efa4a6 pc: acpi: factor out cpu hotplug code from build_ssdt() into separate function
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Igor Mammedov
6b30608774 pc: acpi: cpuhp: move \_GPE._E02() into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
f294ecbc13 pc: acpi: cpuhp: move PRSC() method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
40f981a02d pc: acpi: cpuhp: move CPST() method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
1d608d13eb pc: acpi: cpuhp: move CPMA() method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
fbd7a6b8e2 pc: acpi: cpuhp: move CPEJ() method to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
1295e21a17 pc: acpi: drop unused CPU_STATUS_LEN from DSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
f84548dda4 pc: acpi: memhp: drop not needed stringify(MEMORY_foo) usage
most of MEMORY_foo defines are not shared
with ASL anymore and are used only inside of
memory_hotplug_acpi_table.c, so move them
there and make them strings. As result we
can replace stringify(MEMORY_foo) with just
MEMORY_foo, which makes code a bit cleaner.

No AML change introduced by this patch.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
7f4495e1c1 pc: acpi: memhp: move \_GPE._E03 into SSDT
in addition remove no longer needed acpi-dsdt-mem-hotplug.dsl.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
f177d40ae2 pc: acpi: factor out memhp code from build_ssdt() into separate function
before consolidating memhp code in memory_hotplug_acpi_table.c
and for simplifying review, first factor out memhp code into
new function build_memory_devices() in i386/acpi-build.c

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
----
PS:
   no functional change, only code movement.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
2ca66546ce pc: acpi: memhp: move MHPD Device into SSDT
move remnants of MHPD device from DSDT into SSDT.
 i.e. Device(MHPD), _UID, _HID

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
c943764596 pc: acpi: memhp: move MHPD.MCRS method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:17 +02:00
Igor Mammedov
e328e31660 pc: acpi: memhp: move MHPD.MEJ0 method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
2fbd884372 pc: acpi: memhp: move MHPD.MOST method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
fb775d9074 pc: acpi: memhp: move MHPD.MPXM method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
b98401223d pc: acpi: memhp: move MHPD.MRST method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
e8f9db491d pc: acpi: memhp: move MHPD.MSCN method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
12fdadb574 pc: acpi: memhp: move MHPD.MLCK mutex into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
b2344f3e63 pc: acpi: memhp: move MHPD._STA method into SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:38 +02:00
Igor Mammedov
30bd0cf465 pc: acpi: memhp: prepare context in SSDT for moving memhp DSDT code
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:37 +02:00
Igor Mammedov
7cb08cb2d7 tests: acpi: print ASL diff in verbose mode
print ASL difference if there is any when
executing 'make V=1 check'.
Use 'DIFF' environment variable to determine
which diff utility to use and if it's not set
notify user by printing warning that DIFF is
not set if run in verbose mode and there is
difference in ASL.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:37 +02:00
Laszlo Ersek
f070efa8d9 hw/i386: fill in the CENTURY field of the FADT (FACP) ACPI table
The ACPI specification (minimally versions 1.0b through 6.0) define the
FADT.CENTURY field as:

  The RTC CMOS RAM index to the century of data value (hundred and
  thousand year decimals). If this field contains a zero, then the RTC
  centenary feature is not supported. If this field has a non-zero value,
  then this field contains an index into RTC RAM space that OSPM can use
  to program the centenary field.

The x86 targets generate ACPI payload, emulate an RTC
(CONFIG_MC146818RTC), and that RTC supports the "centenary feature" (see
occurrences of RTC_CENTURY in cmos_ioport_write() and cmos_ioport_read()
in "hw/timer/mc146818rtc.c".)

However, FADT.CENTURY is left at zero currently:

  [06Ch 0108   1]            RTC Century Index : 00

which -- according to analysis done by Ruiyu Ni at Intel -- should cause
Linux and Windows 8+ to think the RTC centenary feature is unavailable,
and cause Windows 7 to (incorrectly) assume that the offset to use is
constant 0x32. (0x32 happens to be the right value on QEMU, but Windows 7
is wrong to assume anything at all).

Exposing the right nonzero offset in FADT.CENTURY informs Linux and
Windows 8+ about the right capabilities of the hardware, plus it retrofits
our FADT to Windows 7's behavior.

Regression tested with the following guests (all UEFI installs):
- i386 Q35: Fedora 21 ("Fedlet" edition)
- x86_64:
  - i440fx:
    - Fedora 21
    - RHEL 6 and 7
    - Windows 7 and 10
    - Windows Server 2008 R2 and 2012 R2
  - Q35:
    - Fedora 22
    - Windows 8.1

Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard Henderson <rth@twiddle.net> (maintainer:X86)
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-08 16:01:37 +02:00
Cao jin
349a3b1cc9 igd-passthrough: fix use of host_pci_config_read
Fix the bug introduced by 595a4f07: function host_pci_config_read() should be
pass-by-reference, not value.
This probably means this function never worked for anyone.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:37 +02:00
Haozhong Zhang
c8e6c93857 nvdimm: fix header pointer in nvdimm_build_nfit()
In the current nvdimm_build_nfit(), the pointer 'header' initially equals
to table_data->data + table_data->len. However, the following
g_array_append_vals(table_data, structures->data, structures->len)
may resize and relocate table_data->data[]. Therefore, the usage of 'header'
afterwards may be illegal.

This patch fixes this issue by storing an offset within table_data->data[]
(rather than an address) in 'header'.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08 16:01:37 +02:00
Michael Tokarev
c0d3573632 linux-user: enable sigaltstack for all architectures
There is no reason to limit sigaltstack syscall to just a few
architectures and pretend it is not implemented for others.

If some architecture is not ready for this, that architecture
should be fixed instead.

This fixes LP#1516408.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:36:21 +02:00
Michael Tokarev
27e112f9fd unicore32: convert get_sp_from_cpustate from macro to inline
All other architectures define get_sp_from_cpustate as an inline function,
only unicore32 uses a #define.  With this, some usages are impossible, for
example, enabling sigaltstack in linux-user/syscall.c results in

linux-user/syscall.c: In function ‘do_syscall’:
linux-user/syscall.c:8299:39: error: dereferencing ‘void *’ pointer [-Werror]
  get_sp_from_cpustate(arg1, arg2, get_sp_from_cpustate((CPUArchState *)cpu_env));
                                       ^
linux-user/syscall.c:8299:39: error: request for member ‘regs’ in something not a structure or union

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:36:21 +02:00
Chen Gang
e6deac9cf9 linux-user/mmap.c: Always zero MAP_ANONYMOUS memory in mmap_frag()
When mapping MAP_ANONYMOUS memory fragments, still need notice about to
set it zero, or it will cause issues.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:26:16 +02:00
Laurent Vivier
2a0fa68fb9 linux-user,sh4: fix signal retcode address
To return from a signal, setup_frame() puts an instruction to
be executed in the stack. This sequence calls the syscall sigreturn().

The address of the instruction must be set in the PR register
to be executed.

This patch fixes this: the current code sets the register to the address
of the instruction in the host address space (which can be 64bit whereas
PR is only 32bit), but the virtual CPU can't access this address space,
so we put in PR the address of the instruction in the guest address space.

This patch also removes an useless variable (ret) in the modified functions.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:24:57 +02:00
Laurent Vivier
861d72cd28 linux-user: check fd is >= 0 in fd_trans_host_to_target_data/fd_trans_host_to_target_addr
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:20:35 +02:00
Laurent Vivier
0cf227229b linux-user: manage bind with a socket of SOCK_PACKET type.
This is obsolete, but if we want to use dhcp with an old distro (like debian
etch), we need it. Some users (like dhclient) use SOCK_PACKET with AF_PACKET
and the kernel allows that.

packet(7)

  In Linux 2.0, the only way to  get  a  packet  socket  was  by calling
  socket(AF_INET,  SOCK_PACKET,  protocol).   This is still supported but
  strongly deprecated.  The main difference between the  two methods  is
  that  SOCK_PACKET uses the old struct sockaddr_pkt to specify an inter‐
  face, which doesn't provide physical layer independence.

     struct sockaddr_pkt {
         unsigned short spkt_family;
         unsigned char  spkt_device[14];
         unsigned short spkt_protocol;
     };

  spkt_family contains the device type, spkt_protocol is the  IEEE 802.3
  protocol  type  as  defined  in <sys/if_ether.h> and spkt_device is the
  device name as a null-terminated string, for example, eth0.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:20:15 +02:00
Laurent Vivier
7b36f78274 linux-user: add a function hook to translate sockaddr
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:20:08 +02:00
Laurent Vivier
5d4d366585 linux-user: rename TargetFdFunc to TargetFdDataFunc, and structure fields accordingly
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:19:57 +02:00
Laurent Vivier
ff626f2d9e linux-user: SOCK_PACKET uses network endian to encode protocol in socket()
in PACKET(7) :

  packet_socket = socket(AF_PACKET, int socket_type, int protocol);
[...]
                                   protocol is the  IEEE  802.3 protocol
  number in network order.  See the <linux/if_ether.h> include file for a
  list of allowed protocols.  When protocol is  set  to htons(ETH_P_ALL)
  then all protocols are received.  All incoming packets of that protocol
  type will be passed to the packet socket before they are passed to the
  protocols implemented in the kernel.
[...]
Compatibility

  In Linux 2.0, the only way to  get  a  packet  socket  was  by  calling
  socket(AF_INET,  SOCK_PACKET,  protocol).

We need to tswap16() the protocol because on big-endian, the ABI is
waiting for, for instance for ETH_P_ALL, 0x0003 (big endian ==
network order), whereas on little-endian it is waiting for 0x0300.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:18:47 +02:00
Peter Maydell
6bb9ead762 Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20160108-1' into staging
sdl2/opengl: add opengl context and scanout support
ui/curses: Fix color attribute of monitor for curses

# gpg: Signature made Fri 08 Jan 2016 12:42:02 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-ui-20160108-1:
  sdl2/opengl: add opengl context and scanout support
  ui/curses: Fix color attribute of monitor for curses

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-08 12:50:19 +00:00
Peter Maydell
9df2513730 Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20160108-1' into staging
usb: mtp and ohci fixes.

# gpg: Signature made Fri 08 Jan 2016 10:14:59 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20160108-1:
  ohci: clear pending SOF on suspend
  ohci: delay first SOF interrupt
  usb-mtp: fix call to trace function
  usb-mtp: use safe variant when cleaning events list
  ohci: fix command HostControllerReset
  ohci: fix Host Controller USBRESET
  ohci: split reset method in 3 parts

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-08 11:24:15 +00:00
Gerd Hoffmann
cb47dc9ab9 sdl2/opengl: add opengl context and scanout support
This allows virtio-gpu to render in 3d mode.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-01-08 12:20:15 +01:00
OGAWA Hirofumi
4083733db5 ui/curses: Fix color attribute of monitor for curses
Current text_console_update() writes totally broken color attributes
to console_write_ch(). The format now is writing,

[WRONG]
	bold << 21 | fg << 12 | bg << 8 | char
	fg == 3bits curses color number
	bg == 3bits curses color number

I can't see this format is where come from. Anyway, this doesn't work
at all.

What curses expects is actually (and vga.c is using),

[RIGHT]
	bold << 21 | bg << 11 | fg << 8 | char
	fg == 3bits vga color number
	bg == 3bits vga color number

And curses set COLOR_PAIR() up to match this format, and curses's
chtype. I.e,

	bold | color_pair | char
	color_pair == (bg << 3 | fg)

To fix, this simply uses VGA color number everywhere except curses.c
internal. Then, convert it to above [RIGHT] format to write by
console_write_ch(). And as bonus, this reduces to expose curses define
to other parts (removes COLOR_* from console.c).

[Tested the first line is displayed as white on blue back for monitor
in curses console]

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Message-id: 87r3j95407.fsf@mail.parknet.co.jp
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08 12:20:07 +01:00
Peter Maydell
d9767f1bfa Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-for-peter-2016-01-07' into staging
Block patches from 2015-12-23 until 2016-01-07.

# gpg: Signature made Thu 07 Jan 2016 22:46:08 GMT using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"

* remotes/maxreitz/tags/pull-block-for-peter-2016-01-07: (21 commits)
  iotests: Add test cases for blockdev-mirror
  qmp: Add blockdev-mirror command
  block: Add check on mirror target
  block: Extract blockdev part of qmp_drive_mirror
  block: Rename BLOCK_OP_TYPE_MIRROR to BLOCK_OP_TYPE_MIRROR_SOURCE
  qemu-iotests: s390x: fix test 051
  iotests: 095: Filter _img_info output
  iotests: 095: Use TEST_IMG override instead of "mv"
  iotests: 050: Use TEST_IMG override instead of "mv"
  iotests: 038: Use TEST_IMG override instead of "mv"
  iotests: 037: Use TEST_IMG override instead of "mv"
  iotests: 034: Use TEST_IMG override instead of "mv"
  iotests: 028: Use TEST_IMG override instead of "mv"
  iotests: 024: Use TEST_IMG override instead of "mv"
  iotests: 020: Use TEST_IMG override instead of "mv"
  iotests: 019: Use TEST_IMG override instead of "mv"
  iotests: 018: Use TEST_IMG override instead of "mv"
  block/qapi: Clear err for further error
  block: use drained section in bdrv_close
  qemu-iotests: make check-block.sh work on out-of-tree builds
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-08 10:45:07 +00:00
Wei Liu
2a0c56aa4c 9pfs: factor out v9fs_device_{,un}realize_common
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 15:33:24 +05:30
Wei Liu
60ce86c714 9pfs: rename virtio-9p.c to 9p.c
Now that file only contains generic code.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 15:32:13 +05:30
Wei Liu
72a189770a 9pfs: rename virtio_9p_set_fd_limit to use v9fs_ prefix
It's not virtio specific.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
2016-01-08 15:31:49 +05:30
Wei Liu
0192cc5d79 9pfs: move handle_9p_output and make it static function
It's only used in virtio device.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 15:31:25 +05:30
Wei Liu
4b311c5f0b 9pfs: export pdu_{submit,alloc,free}
They will be used in later patches.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 15:30:39 +05:30
Wei Liu
0d3716b4e6 9pfs: factor out virtio_9p_push_and_notify
The new function resides in virtio specific file.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 15:30:03 +05:30
Wei Liu
ebe74f8ba2 9pfs: break out 9p.h from virtio-9p.h
Move out generic definitions from virtio-9p.h to 9p.h. Fix header
inclusions.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 15:25:30 +05:30
Wei Liu
592707af7f 9pfs: break out virtio_init_iov_from_pdu
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 15:23:02 +05:30
Wei Liu
f657b17a63 9pfs: factor out pdu_push_and_notify
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 15:20:02 +05:30
Wei Liu
fe9fa96d7c 9pfs: factor out virtio_pdu_{,un}marshal
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 15:19:40 +05:30
Harmandeep Kaur
0e173b24b5 linux-user/syscall.c: malloc()/calloc() to g_malloc()/g_try_malloc()/g_new0()
Convert malloc()/ calloc() calls to g_malloc()/ g_try_malloc()/ g_new0()

All heap memory allocation should go through glib so that we can take
advantage of a single memory allocator and its debugging/tracing features.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 11:36:13 +02:00
Laurent Vivier
3e24bb3f12 linux-user: in poll(), if nfds is 0, pfd can be NULL
This problem appears with yum in Fedora 20 / PPC64 container.

test case:

    #include <stdio.h>
    #include <poll.h>

    int main(void)
    {
        int ret;

        ret = poll(NULL, 0, 1000);
        printf("%d\n", ret);
    }

target test environment: Fedora 20 / PPC64
host test environment: Ubuntu 14.0.2 / x86_64

original test result: -1

    13451 poll(0,0,1000,274886297496,268566664,268566648) = -1 errno=14 (Bad address)

patched test result: 0

    13536 poll(0,0,1000,274886297496,268566664,268566648) = 0

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 11:36:13 +02:00
Laurent Vivier
928bed6a05 linux-user: correctly align target_epoll_event
According to comments in /usr/include/linux/eventpoll.h,
poll_event is packed only on x86_64.

And to be sure fields are correctly aligned in epoll_data,
use abi_XXX types for all of them.

Moreover, fd type is wrong: fd is int, not ulong.

This has been tested with a ppc guest on an x86_64 host:
without this patch, systemd crashes (core).

CC: Alexander Graf <agraf@suse.de>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 11:36:12 +02:00
Laurent Vivier
e36800c91a linux-user: add signalfd/signalfd4 syscalls
This patch introduces a system very similar to the one used in the kernel
to attach specific functions to a given file descriptor.

In this case, we attach a specific "host_to_target()" translator to the fd
returned by signalfd() to be able to byte-swap the signalfd_siginfo
structure provided by read().

This patch allows to execute the example program given by
man signalfd(2):

 #include <sys/signalfd.h>
 #include <signal.h>
 #include <unistd.h>
 #include <stdlib.h>
 #include <stdio.h>

 #define handle_error(msg) \
     do { perror(msg); exit(EXIT_FAILURE); } while (0)

 int
 main(int argc, char *argv[])
 {
     sigset_t mask;
     int sfd;
     struct signalfd_siginfo fdsi;
     ssize_t s;

     sigemptyset(&mask);
     sigaddset(&mask, SIGINT);
     sigaddset(&mask, SIGQUIT);

     /* Block signals so that they aren't handled
        according to their default dispositions */

     if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1)
         handle_error("sigprocmask");

     sfd = signalfd(-1, &mask, 0);
     if (sfd == -1)
         handle_error("signalfd");

     for (;;) {
         s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo));
         if (s != sizeof(struct signalfd_siginfo))
             handle_error("read");

         if (fdsi.ssi_signo == SIGINT) {
             printf("Got SIGINT\n");
         } else if (fdsi.ssi_signo == SIGQUIT) {
             printf("Got SIGQUIT\n");
             exit(EXIT_SUCCESS);
         } else {
             printf("Read unexpected signal\n");
         }
     }
 }

 $ ./signalfd_demo
 ^CGot SIGINT
 ^CGot SIGINT
 ^\Got SIGQUIT

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 11:36:12 +02:00
Wei Liu
0e2082d9e5 9pfs: make pdu_{,un}marshal proper functions
Factor out v9fs_iov_v{,un}marshal. Implement pdu_{,un}marshal with those
functions.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 14:53:39 +05:30
Wei Liu
dc295f8353 9pfs: PDU processing functions should start pdu_ prefix
This matches naming convention of pdu_marshal and pdu_unmarshal.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 14:35:59 +05:30
Wei Liu
ad38ce9ed1 9pfs: PDU processing functions don't need to take V9fsState as argument
V9fsState can be referenced by pdu->s. Initialise that in device
realization function.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 14:35:17 +05:30
Wei Liu
2209bd050a fsdev: rename virtio-9p-marshal.{c,h} to 9p-iov-marshal.{c,h}
And rename v9fs_marshal to v9fs_iov_marshal, v9fs_unmarshal to
v9fs_iov_unmarshal.

The rationale behind this change is that, this marshalling interface is
used both by virtio and proxy helper. Renaming files and functions to
reflect the true nature of this interface.

Xen transport is going to have its own marshalling interface.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 14:35:06 +05:30
Laurent Vivier
087462c773 ohci: clear pending SOF on suspend
On overcommitted CPU, kernel can be so slow that an interrupt can
be triggered by the device whereas the driver is not ready to receive
it. This drives us into an infinite loop.

On suspend, if a SOF interrupt is raised between the stop of the
device processing and the change of the device internal state to
OHCI_USB_SUSPEND (QEMU stops SOF timer on this state change), this
interrupt is never acknowledged.

This patch clears pending SOF interrupt on OHCI_USB_SUSPEND setting.

Some details:

- ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ
  only if the state of the driver (rh_state) is OHCI_STATE_RUNNING.
  So if this interrupt happens and the driver is not in this state,
  the function is called again and again, moving the system to a
  CPU starvation.

- ohci_rh_suspend(): the function stop the operation and acknowledge
  pending interrupts (but doesn't disable it). Later in the function,
  the device is moved to OHCI_SUSPEND_STATE, and the driver to
  OHCI_RH_SUSPENDED. If between the moment when the interrupt is
  acknowledged and the moment when the device is suspended a new
  interrupt is raised, it will be never acknowledged because the
  driver is now not in OHCI_RH_RUNNING state.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1452109525-32150-3-git-send-email-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08 09:29:24 +01:00
Laurent Vivier
fd0a10cd20 ohci: delay first SOF interrupt
On overcommitted CPU, kernel can be so slow that an interrupt can
be triggered by the device whereas the driver is not ready to receive
it. This drives us into an infinite loop.

This does not happen on real hardware because real hardware never send
interrupt immediately after the controller has been moved to OPERATION state.

This patch tries to delay the first SOF interrupt to let driver exits from
the critical section (which is not protected against interrupts...)

Some details:

- ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ
  only if the state of the driver (rh_state) is OHCI_STATE_RUNNING.
  So if this interrupt happens and the driver is not in this state,
  the function is called again and again, moving the system to a
  CPU starvation.

- ohci_rh_resume(): the driver re-enables operation with OHCI_USB_OPER.
  In QEMU this start the SOF timer and QEMU starts to send IRQs. As
  the driver is not in OHCI_STATE_RUNNING and not protected against IRQ,
  the ohci_irq() can be called and the driver never moved to
  OHCI_STATE_RUNNING.

Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1452109525-32150-2-git-send-email-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08 09:29:24 +01:00
Bandan Das
ec93e158b1 usb-mtp: fix call to trace function
trace_usb_mtp_inotify_event() was being called after the object was
being freed.

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1450861787-16213-3-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08 09:25:50 +01:00
Bandan Das
c22d5dcd7a usb-mtp: use safe variant when cleaning events list
usb_mtp_inotify_cleanup uses QLIST_FOREACH to pick events
from a list and free them which is incorrect. Use QLIST_FOREACH_SAFE
instead.

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1450861787-16213-2-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08 09:25:50 +01:00
Hervé Poussineau
0922c3f606 ohci: fix command HostControllerReset
Specification says that: "This bit is set by HCD to initiate a software reset of HC."

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-4-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08 09:25:50 +01:00
Hervé Poussineau
7d938fd14b ohci: fix Host Controller USBRESET
Specification says that, when entering this state, "the contents of the registers
(except Root Hub registers) are preserved by the HC. [...] The Root Hub is being reset,
which causes the Root Hub's downstream ports to be reset and possibly powered off."

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-3-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08 09:25:50 +01:00
Hervé Poussineau
84d04e2162 ohci: split reset method in 3 parts
The three parts are:
- root hub reset (ohci_roothub_reset)
- host controller soft reset (ohci_soft_reset)
- host controller hard reset (ohci_hard_reset)

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-2-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08 09:25:50 +01:00
Wei Liu
829dd2861a fsdev: break out 9p-marshal.{c,h} from virtio-9p-marshal.{c,h}
Break out some generic functions for marshaling 9p state. Pure code
motion plus minor fixes for build system.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 12:57:25 +05:30
Wei Liu
71042cffc0 9pfs: remove dead code
Some structures in virtio-9p.h have been unused since 2011 when relevant
functions switched to use coroutines.

The declaration of pdu_packunpack and function do_pdu_unpack are
useless.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 12:56:03 +05:30
Wei Liu
756cb74a59 9pfs: merge hw/virtio/virtio-9p.h into hw/9pfs/virtio-9p.h
The deleted file only contained V9fsConf which wasn't virtio specific.
Merge that to the general header of 9pfs.

Fixed header inclusions as I went along.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 12:48:11 +05:30
Wei Liu
267ae092e2 9pfs: rename virtio-9p-xattr{,-user}.{c,h} to 9p-xattr{,-user}.{c,h}
These three files are not virtio specific. Rename them to generic
names.

Fix comments and header inclusion in various files.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 12:47:35 +05:30
Wei Liu
364031f179 9pfs: rename virtio-9p-synth.{c,h} to 9p-synth.{c,h}
These two files are not virtio specific. Rename them to use generic
names.

Fix includes in various C files. Change define guards and comments
in header files.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 12:40:55 +05:30
Wei Liu
494a8ebe71 9pfs: rename virtio-9p-proxy.{c,h} to 9p-proxy.{c,h}
Those two files are not virtio specific. Rename them to use generic
names.

Fix includes in various C files. Change define guards and comments
in header files.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 12:38:15 +05:30
Wei Liu
d57b78002c 9pfs: rename virtio-9p-posix-acl.c to 9p-posix-acl.c
This file is not virtio specific. Rename it to use generic name.

Fix comment and remove unneeded inclusion of virtio.h.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 12:37:32 +05:30
Wei Liu
f00d4f596b 9pfs: rename virtio-9p-local.c to 9p-local.c
This file is not virtio specific. Rename it to use generic name.

Fix comment and remove unneeded inclusion of virtio.h.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 12:36:44 +05:30
Wei Liu
3b9ca04653 9pfs: rename virtio-9p-handle.c to 9p-handle.c
This file is not virtio specific. Rename it to use generic name.

Fix comment and remove unneeded inclusion of virtio.h.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 12:35:46 +05:30
Wei Liu
fe52840c87 9pfs: rename virtio-9p-coth.{c,h} to coth.{c,h}
Those two files are not virtio specific. Rename them to use generic
names.

Fix includes in various C files. Change define guards and comments in
header files.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-08 12:04:43 +05:30
Fam Zheng
94ca2c7395 iotests: Add test cases for blockdev-mirror
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450932306-13717-6-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:18 +01:00
Fam Zheng
df92562e68 qmp: Add blockdev-mirror command
This will start a mirror job from a named device to another named
device, its relation with drive-mirror is similar with blockdev-backup
to drive-backup.

In blockdev-mirror, the target node should be prepared by blockdev-add,
which will be responsible for assigning a name to the new node, so
we don't have 'node-name' parameter.

Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1450932306-13717-5-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:18 +01:00
Fam Zheng
e40e5027f6 block: Add check on mirror target
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450932306-13717-4-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:18 +01:00
Fam Zheng
4193cdd771 block: Extract blockdev part of qmp_drive_mirror
This is the part that will be reused by blockdev-mirror.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450932306-13717-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:18 +01:00
Fam Zheng
05e4d14bf3 block: Rename BLOCK_OP_TYPE_MIRROR to BLOCK_OP_TYPE_MIRROR_SOURCE
It's necessary to distinguish source and target before we can add
blockdev-mirror, because we would want a concrete type of operation to
check on target bs before starting.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450932306-13717-2-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Bo Tu
dd87de06fa qemu-iotests: s390x: fix test 051
Replace the remaining "-drive file..."
by "-drive file=...,if=none,id=$device_id", then x86 and s390x
can get the common output.
"if=ide, if=floppy, if=scsi" are not supported by s390x,
so these test cases are not executed for s390x platform.

Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
f943078e42 iotests: 095: Filter _img_info output
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1450752561-9300-12-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
61b422265e iotests: 095: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1450752561-9300-11-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
ae7e0bf461 iotests: 050: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-10-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
1b935e1dc9 iotests: 038: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-9-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
9b652fbe1d iotests: 037: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-8-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
5581018400 iotests: 034: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-7-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
49557d656c iotests: 028: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-6-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
f19f11896e iotests: 024: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-5-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
71ad761766 iotests: 020: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-4-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
f2bbcd3f7f iotests: 019: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
9b337ae90a iotests: 018: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-2-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Fam Zheng
0fa296eb00 block/qapi: Clear err for further error
Since a5002d5 (block/qapi: allow best-effort query) we don't return at
this error, however err must be cleared before passing to
bdrv_query_snapshot_info_list below, as required by error API.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1450779107-26765-1-git-send-email-famz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Paolo Bonzini
fc27291daf block: use drained section in bdrv_close
bdrv_close is used when ejecting a medium.  Use a drained section to ensure
that all I/O goes to either the old medium or the bitbucket.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1450867706-19860-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Paolo Bonzini
7467d94cc4 qemu-iotests: make check-block.sh work on out-of-tree builds
Since check-block.sh, the "check" script has learnt to find the source
path.  On the other hand, it expects common.env to be in the build tree
(both changes made in commit 76c7560, "configure: Enable out-of-tree
iotests", 2014-05-24).  So, it is wrong to invoke "check" from the source
path like check-block.sh does.  Fix it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1450867341-11100-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:16 +01:00
Fam Zheng
253597d8cf iotests: 086: Add raw format
Raw is as qualified as qcow2 for this test case, add it for more
coverage.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1450851979-15580-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:16 +01:00
Edgar E. Iglesias
a7e00e2536 petalogix-ml605: Set the MicroBlaze CPU version to 8.10.a
Set the MicroBlaze CPU version to 8.10.a avoiding a runtime
warning due to an unset CPU version.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-07 14:57:26 +01:00
Edgar E. Iglesias
ad24f947be s3adsp1800: Set the MicroBlaze CPU version to 7.10.d
Set the MicroBlaze CPU version to 7.10.d avoiding a runtime
warning due to an unset CPU version.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-07 14:57:26 +01:00
Peter Maydell
263699432c Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging
qemu-sparc update

# gpg: Signature made Thu 07 Jan 2016 13:20:13 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"

* remotes/mcayland/tags/qemu-sparc-signed:
  target-sparc: implement NPT timer bit
  sun4u: split NPT and INT_DIS accesses between timer and compare registers
  sun4u: split out NPT and INT_DIS into separate CPUTimer fields

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-07 13:33:19 +00:00
Mark Cave-Ayland
c9a464420d target-sparc: implement NPT timer bit
If the NPT bit is set in the timer register, all non-supervisor read accesses
to the register should fail with a privilege exception.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-07 12:21:06 +00:00
Mark Cave-Ayland
bf43330aa4 sun4u: split NPT and INT_DIS accesses between timer and compare registers
Accesses to the timer register high bit should only set NPT, whilst accesses
to the timer compare register high bit should only set INT_DIS. This fixes
issues with the timer being unexpectedly disabled whilst trying to boot
FreeBSD SPARC64.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-07 12:21:02 +00:00
Mark Cave-Ayland
e913cac71b sun4u: split out NPT and INT_DIS into separate CPUTimer fields
Currently there is confusion between use of these bits for the timer and timer
compare registers (while they both have the same value, the behaviour is
different). Split into two separate CPUTimer fields so we can always reference
the correct value.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-07 12:20:53 +00:00
Peter Maydell
ac93a06786 Merge remote-tracking branch 'remotes/kraxel/tags/pull-seabios-20160105-1' into staging
seabios: update to release 1.9.0

# gpg: Signature made Tue 05 Jan 2016 12:07:22 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-seabios-20160105-1:
  seabios: update binaries to release 1.9.0
  seabios: stop updating aml files
  seabios: update 128k bios config
  seabios: use new EXTRAVERSION to tag qemu builds
  seabios: update submodule to release 1.9.0

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-07 11:22:18 +00:00
Peter Maydell
4101dfe0cd Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Thu 07 Jan 2016 09:13:22 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/tracing-pull-request:
  trace: add make dependencies on tracetool source
  trace: fix make foo-timestamp rules
  trace: fix PRIx64 constants in trace-events
  trace: reflect the file name change

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-07 10:19:28 +00:00
Stefan Hajnoczi
cef517ca4b trace: add make dependencies on tracetool source
Patches that change tracetool can break the build if old build output
files are lying around.

This happens because the Makefile does not specify dependencies on
tracetool.  The build will use old object files that do not match the
current source code.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-07 16:59:56 +08:00
Stefan Hajnoczi
9967e4fec0 trace: fix make foo-timestamp rules
The Makefile uses intermediate timestamp files to avoid rebuilding if
tracetool output is unchanged.

Timestamps are implemented incorrectly.  This was fixed for rules.mak in
commit 4b25966ab9 ("rules.mak: cleanup
config generation rules") but never fixed in trace/Makefile.objs.

The problem with the old timestamp implementation was that make doesn't
notice the updated file modification time until the next time it is run.
It was necessary to run make twice in a row to achieve a full rebuild.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-07 16:59:38 +08:00
Mark Cave-Ayland
c6daed8654 trace: fix PRIx64 constants in trace-events
Commit c8ee0a4 introduced new events containing PRIx64 constants without
including the % prefix in the preceding string. This results in a compile
error during build if --enable-trace-backends is passed to configure.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450566522-6003-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-07 09:39:11 +08:00
Qinghua Jin
67a9faccef trace: reflect the file name change
Some functions was moved from block.c to block/io.c, so the trace-events file should reflect that change.

Signed-off-by: Qinghua Jin <qhjin_dev@163.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-07 09:39:11 +08:00
Gerd Hoffmann
4b9294c00e seabios: update binaries to release 1.9.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-05 13:04:15 +01:00
Gerd Hoffmann
bf864863f6 seabios: stop updating aml files
ACPI aml files traditionally have been managed in the seabios repo.
In qemu version 2.0 we've switched over to have qemu generate the
acpi tables and provide them to the firmware via fw_cfg.

The old aml files are still there and used for old machine types.
Well, actually the q35 file only, the piix4 version is compiled into
seabios (unless built with CONFIG_ACPI_DSDT=n) and is there for
reference only.

The aml files havn't been touched for a long time, and given that
new features requiring acpi changes are typically only added to new
machine types this is unlikely to change in the future.  So stop
updating them.

That allows to cleanup things a bit on the seabios side in the future.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-05 13:04:14 +01:00
Gerd Hoffmann
cae7e84eb7 seabios: update 128k bios config
Turn off OHCI + TPM support to keep the size below 128k.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-05 13:04:14 +01:00
Gerd Hoffmann
437b8d8c59 seabios: use new EXTRAVERSION to tag qemu builds
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-05 13:04:14 +01:00
Gerd Hoffmann
ad30c0b0d8 seabios: update submodule to release 1.9.0
Highlights / user visible changes in seabios:
 * boot menu key is ESC now.
 * virtio 1.0 support.
 * sdcard support.
 * fw_cfg dma suport.
 * usual share of bugfixes ;)

In vgabios:
 * Emulates leal instruction.  Works around a bug in old x86emu versions,
   which makes old xorg vesa drivers work (RHEL-5 for example).

full shortlog rel-1.8.2..rel-1.9.0
----------------------------------

Ameya Palande (1):
      x86: add barrier to read{b,w,l} and write{b,w,l} functions

Andreas Färber (1):
      checkrom: Fix typo in error message

Chen Fan (1):
      pci: enable SERR# for error forwarding in bridge control register

Gerd Hoffmann (28):
      vga: simplify vga builds
      vga: rework virtio-vga support
      vga: add virtio-vga to kconfig
      pci: allow to loop over capabilities
      virtio: run drivers in 32bit mode
      virtio: add struct vp_device
      virtio: pass struct pci_device to vp_init_simple
      virtio: add version 1.0 structs and #defines
      virtio: add version 0.9.5 struct
      virtio: find version 1.0 virtio capabilities
      virtio: create vp_cap struct for legacy bar
      virtio: add read/write functions and macros
      virtio: make features 64bit, support version 1.0 features
      virtio: add version 1.0 support to vp_{get,set}_status
      virtio: add version 1.0 support to vp_get_isr
      virtio: add version 1.0 support to vp_reset
      virtio: add version 1.0 support to vp_notify
      virtio: remove unused vp_del_vq
      virtio: add version 1.0 support to vp_find_vq
      virtio-scsi: fix initialization for version 1.0
      virtio-blk: fix initialization for version 1.0
      virtio: use version 1.0 if available (flip the big switch)
      virtio: also probe version 1.0 pci ids
      virtio: legacy cleanup
      virtio-blk: 32bit cleanup
      virtio-scsi: 32bit cleanup
      virtio-ring: 32bit cleanup
      virtio-pci: use high memory for rings

Julius Werner (1):
      xhci: Count new Max Scratchpad Bufs bits from XHCI 1.1

Kevin O'Connor (126):
      docs: add page for SeaVGABIOS
      docs: Add page describing the patch contribution process
      docs: Add page on available CBFS/fw_cfg runtime config files
      docs: Prefer triple backticks to multiple lines with single backticks
      smp: Fix smp race introduced in 0673b787
      docs: Note release date of 1.8.1
      vgabios: On bda_save_restore() the saved vbe_mode also has flags in it
      vgabios: Don't use extra stack if it appears a modern OS is in use
      docs: Clarify that pci-optionrom-exec doesn't apply to roms in cbfs
      checkstack: Replace function information tuple with class
      checkstack: Simplify yield calculations
      checkstack: Prefer passing "function" class instead of function address
      smbios: Use integer signature instead of string signature
      vgabios: Don't use "smsww" instruction - it confuses x86emu
      vgabios: Add config option for assembler fixups
      vgabios: Emulate "leal" instruction
      checkstack: Minor - continue if not a regular asm line
      Don't forward declare functions with "inline" in headers
      build: Support "make VERSION=xyz" to override the default build version
      tcg: Use seabios setup()/prepboot() calling convention for tcg
      build: CONFIG_VGA_FIXUP_ASM should depend on CONFIG_BUILD_VGABIOS
      bootorder: Update "extra pci root" buses bootorder format to match qemu
      Make sure all code checks for malloc failures
      docs: Note release date of 1.8.2
      block: Split process_op() command dispatch up into multiple functions
      block: Introduce default_process_op() with common command handling codes
      block: Route scsi style commands through 'struct disk_op_s'
      blockcmd: Introduce scsi_fill_cmd()
      ata: Handle ATA ATAPI drives directly via 'struct disk_op_s' requests
      ahci: Handle AHCI ATAPI drives directly via 'struct disk_op_s' requests
      usb-msc: Handle USB drives directly via 'struct disk_op_s' requests
      usb-uas: Handle USB drives directly via 'struct disk_op_s' requests
      lsi-scsi: Handle LSI drives directly via 'struct disk_op_s' requests
      esp-scsi: Handle ESP drives directly via 'struct disk_op_s' requests
      megasas: Handle Megasas drives directly via 'struct disk_op_s' requests
      virtio-scsi: Handle virtio drives directly via 'struct disk_op_s' requests
      pvscsi: Move pvscsi_fill_req() code into pvscsi_cmd()
      pvscsi: Handle pvscsi drives directly via 'struct disk_op_s' requests
      blockcmd: Remove unused scsi_process_op() and cdb_cmd_data()
      blockcmd: Convert cdb_is_read() to scsi_is_read()
      block: Rename process_XXX_op() functions to XXX_process_op()
      coreboot: Try to auto-detect if the CBFS anchor pointer is a relative pointer
      ps2: Support mode for polling the PS2 port instead of using irqs
      ata: Make sure "chanid" is relative to PCI device for bootorder file
      Don't enable interrupts prior to IVT and PIC setup
      ps2: Don't wait 100ms to discard possible extra reset receive byte
      timer: Delay timestamp counter init until after pmtimer is probed
      timer: Add CONFIG_TSC_TIMER build option to disable the CPU TSC timer
      ramdisk: Allow ramdisk support (CONFIG_FLASH_FLOPPY) under QEMU
      Minor - move declaration of CDRom_locks to code that uses it
      smm: ignore bits 16,18-31 of SMM revision ID at runtime too
      vgafb: Minor - move gfx_common() variables outside of switch statement
      sdcard: Check if card is present before sending commands to card
      sdcard: Implement controller frequency setting according to sdhci spec
      sdcard: Make sure controller support 3.3V before enabling it
      sdcard: Set timeout control register during init (to max allowed timeout)
      sdcard: Improve SD card initialization command sequence
      sdcard: Add proper delays during card power up
      mptable: Don't create mptable if it is very large
      optionroms: Don't run option rom on PCI bar if CBFS/fw_cfg version exists
      edd: Pass the segment/offset from int 1348 calls using a 'struct segoff_s'
      edd: Reduce parameters to fill_generic_edd()
      Move CanInterrupt check to check_irqs()
      Call cpu_relax() if yielding prior to interrupts being enabled
      sdcard: Fix typo - use sdcard_pio() instead of sdcard_pio_app()
      sdcard: Fill command bits according to spec
      sdcard: Support SDHCI v3.00 spec clock setting
      sdcard: Move power setup to new function sdcard_set_power()
      sdcard: Power controller up to maximum voltage supported
      sdcard: Power down controller on failure
      sdcard: The card should never be in a busy state at start of sdcard_pio()
      sdcard: Implement timeout on every block read in sdcard_pio_transfer()
      sdcard: Rename waitw() to sdcard_waitw() and simplify
      sdcard: Perform a controller reset at start of init
      sdcard: Check for error events during sdcard_pio()
      sdcard: Initial support for MMC cards
      sdcard: Allow the sdcard driver to run on real hardware
      rtc: Support disabling the RTC timer irq support
      Add minimal support for machines without hardware interrupts
      ps2: Eliminate "etc/ps2-poll-only"; use CONFIG_HARDWARE_IRQ instead
      sdcard: Allow sdcard addresses to be specified in CBFS files
      xhci: Minor - add USB port type comments to xhci_hub_reset()
      docs: Don't use an add-symbol-file offset when describing gdb debugging
      rtc: Disable NMI in rtc_mask()
      sdcard: Move sdcard_set_frequency()/sdcard_set_power() in sdcard.c
      sdcard: Move frequency setting into sdcard_card_setup()
      sdcard: Move drive registration to sdcard_card_setup()
      sdcard: Turn card_type into a bitmap and store if card is MMC type
      sdcard: Display sdcard product name in boot menu
      sdcard: Obtain card capacity and report it on the boot menu
      megasas: Use outl() on MFI_IDB register
      minor - correct spelling error in comment
      Simplify transition16/32 assembler code
      docs: Minor - add "code relocation" link to "Execution and code flow" document
      Unify smm/sloppy variants of call32_prep/post and call16_helper
      Rename Call32Data to Call16Data
      Unify inline assembler in variants of call16 functions
      Unify call32_sloppy() and call32()
      Use transition32_nmi_off from call32() and call16_back()
      Consolidate code16*() functions
      Always enable caching on transition32; backup/restore cr0 on call32
      e820: Introduce e820_remove() and avoid exporting E820_HOLE
      e820: Rename memmap.c to e820map.c and use consistent "e820_" prefix
      e820: Update debugging messages to report 64bit values
      virtio: Simplify vring alignment code
      virtio: Move standard definitions from virtio-ring.h to standard headers
      malloc: Use consistent naming for internal low-level "alloc" functions
      malloc: Introduce common helper alloc_new_detail()
      malloc: Add warning if free() called on invalid memory
      malloc: Don't mix virtual and physical addresses
      memmap: Introduce SYMBOL() macro to access linker script symbols
      build: Rework version generation; don't allow make version override
      build: Report gcc and binutils versions in debug log
      build: Generate "reproducible" version strings on "clean" builds
      stacks: Use macro wrappers for call32() and stack_hop_back()
      malloc: Rename csm_malloc_preinit() to malloc_csm_preinit()
      build: Be more permissive in buildversion.py tool version scan
      docs: Document 'make EXTRAVERSION=xyz' and scripts/tarball.sh
      build: Allow official tarball builds to be considered "clean"
      coreboot: Minor - avoid K&R style function declaration
      biostables: Minor - fix incorrect indentation
      virtio: Minor - replace tab characters with space
      docs: Minor - replace seavgabios text in Build_overview.md with link
      buildversion: Avoid subprocess.check_output() as that requires python2.7
      buildversion: Add debugging messages
      docs: Note v1.9.0 release

Kyösti Mälkki (1):
      PCI SDHCI driver: Fix base address

Magnus Granberg (1):
      build: use -fstack-check=no when available

Marc Marí (1):
      Add QEMU fw_cfg DMA interface

Marcel Apfelbaum (2):
      fw/pci: scan all buses if extraroots romfile is present
      fw/pci: map memory and IO regions for multiple pci root buses

Paolo Bonzini (4):
      boot.c: delay exiting boot if menu key is ESC
      boot: switch default menu key to ESC
      smm: ignore bits 16,18-31 of SMM revision ID
      smm: fix outl argument order

Paulo Alcantara (1):
      ich9: initialise RCBA register through LPC interface

Quan Xu (1):
      make SeaBios compatible with Xen vTPM.

Stefan Berger (9):
      Add an implementation of a TPM TIS driver
      Implementation of the TCG BIOS extensions
      Support for BIOS interrupt handler
      Add 'measurement' code to the BIOS
      tpm: Introduce a #define for command tag
      tpm: Be consistent with array sizes in tcgbios.c
      tpm: clean up parameters to build_and_send_cmd
      tpm: Clean up in tcgbios.h
      tpm: Move call to tpm_option_rom into init_optionrom

Stefan Weil (2):
      megasas: Fix outw, outl argument order
      Fix typos found by codespell

Vladimir Serbinenko (3):
      ahci: Ignore max_ports.
      Link rom.o with -N option.
      Add multiboot support.

tpearson@raptorengineeringinc.com (1):
      Add an option to only execute option ROMs contained in CBFS

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-05 13:01:02 +01:00
Peter Maydell
38a762fec6 Merge remote-tracking branch 'remotes/berrange/tags/pull-crypto-fixes-2015-12-23-1' into staging
Merge misc crypto changes & fixes

# gpg: Signature made Wed 23 Dec 2015 11:11:54 GMT using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"

* remotes/berrange/tags/pull-crypto-fixes-2015-12-23-1:
  crypto: fix transposed arguments in cipher error message
  crypto: ensure qapi/crypto.json is listed in qapi-modules
  crypto: move QCryptoCipherAlgorithm/Mode enum definitions into QAPI
  crypto: move QCryptoHashAlgorithm enum definition into QAPI
  crypto: add ability to query hash digest len
  crypto: add additional query accessors for cipher instances

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-23 13:53:32 +00:00
Peter Maydell
8b4f90316a Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Fix a 2.5 regression.

# gpg: Signature made Wed 23 Dec 2015 10:57:00 GMT using DSA key ID 0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg:                 aka "Greg Kurz <groug@free.fr>"
# gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg:                 aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg:                 aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* remotes/gkurz/tags/for-upstream:
  virtio-9p: use accessor to get thread_pool

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-23 13:29:47 +00:00
Peter Maydell
e833dfddb4 Merge remote-tracking branch 'remotes/berrange/tags/pull-io-fixes-2015-12-23-1' into staging
Merge misc I/O channel fixes

# gpg: Signature made Wed 23 Dec 2015 10:54:52 GMT using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"

* remotes/berrange/tags/pull-io-fixes-2015-12-23-1:
  io: fix stack allocation when sending of file descriptors
  io: fix setting of QIO_CHANNEL_FEATURE_FD_PASS on server connections
  io: bind to loopback IP addrs in test suite

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-23 12:55:55 +00:00
Peter Maydell
5fbba56073 Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, pc features

pxb support for q35
nvdimm support
most of ipmi support
part of DSDT rewrite

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 22 Dec 2015 16:47:18 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (55 commits)
  acpi: extend aml_and() to accept target argument
  acpi: extend aml_or() to accept target argument
  acpi add aml_dma()
  acpi: add aml_to_buffer()
  acpi: add aml_to_hexstring()
  acpi: extend aml_field() to support LockRule
  acpi: add aml_lgreater()
  acpi: add aml_lor()
  acpi: add aml_sleep()
  acpi: add aml_alias()
  acpi: extend aml_shiftright() to accept target argument
  acpi: add aml_to_integer()
  acpi: add aml_call0() helper
  acpi: add aml_decrement() and aml_subtract()
  acpi: extend aml_add() to accept target argument
  acpi: aml: add helper for Opcode Arg2 Arg2 [Dst] AML pattern
  acpi: add aml_create_qword_field()
  acpi: add aml_mutex(), aml_acquire(), aml_release()
  acpi: add aml_lgreater_equal()
  acpi: add aml_sizeof
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-23 12:27:51 +00:00
Peter Maydell
05bec7eb0e Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2015-12-22' into staging
Xen 2015/12/22

# gpg: Signature made Tue 22 Dec 2015 16:17:57 GMT using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"

* remotes/sstabellini/tags/xen-2015-12-22:
  xen_disk: treat "vhd" as "vpc"
  xen/pass-through: correctly deal with RW1C bits
  xen/MSI-X: really enforce alignment
  xen/MSI-X: latch MSI-X table writes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-23 12:04:01 +00:00
Daniel P. Berrange
50de626151 crypto: fix transposed arguments in cipher error message
When reporting an incorrect key length for a cipher, we
mixed up the actual vs expected arguments.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange
48befbc344 crypto: ensure qapi/crypto.json is listed in qapi-modules
The rebuild of qapi-types.c/h is not correctly triggered
when qapi/crypto.json is changed because it was missing
from the list of files in the qapi-modules variable.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange
d8c02bcc94 crypto: move QCryptoCipherAlgorithm/Mode enum definitions into QAPI
The QCryptoCipherAlgorithm and QCryptoCipherMode enums are
defined in the crypto/cipher.h header. In the future some
QAPI types will want to reference the hash enums, so move
the enum definition into QAPI too.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange
d84b79d358 crypto: move QCryptoHashAlgorithm enum definition into QAPI
The QCryptoHashAlgorithm enum is defined in the crypto/hash.h
header. In the future some QAPI types will want to reference
the hash enums, so move the enum definition into QAPI too.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange
7b36064c90 crypto: add ability to query hash digest len
Add a qcrypto_hash_digest_len() method which allows querying of
the raw digest size for a given hash algorithm.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange
dd2bf9eb95 crypto: add additional query accessors for cipher instances
Adds new methods to allow querying the length of the cipher
key, block size and initialization vectors.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange
7b3c618ad0 io: fix stack allocation when sending of file descriptors
When sending file descriptors over a socket, we have to
allocate a data buffer to hold the FDs in the scmsghdr.
Unfortunately we allocated the buffer on the stack inside
an if () {} block, but called sendmsg() outside the block.
So the stack bytes holding the FDs were liable to be
overwritten with other data. By luck this was not a problem
when sending 1 FD, but if sending 2 or more then it would
fail.

The fix is to simply move the variables outside the nested
'if' block. To keep valgrind quiet we also zero-initialize
the 'control' buffer.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 10:53:03 +00:00
Greg Kurz
4b3a4f2d45 virtio-9p: use accessor to get thread_pool
The aio_context_new() function does not allocate a thread pool. This is
deferred to the first call to the aio_get_thread_pool() accessor. It is
hence forbidden to access the thread_pool field directly, as it may be
NULL. The accessor *must* be used always.

Fixes: ebac1202c9
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-12-23 10:56:58 +01:00
Daniel P. Berrange
bead59946a io: fix setting of QIO_CHANNEL_FEATURE_FD_PASS on server connections
The QIO_CHANNEL_FEATURE_FD_PASS feature flag is set in the
qio_channel_socket_set_fd() method, however, this only deals
with client side connections.

To ensure server side connections also have the feature flag
set, we must set it in qio_channel_socket_accept() too. This
also highlighted a typo fix where the code updated the
sockaddr struct in the wrong object instance.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-22 18:19:32 +00:00
Daniel P. Berrange
e4d2edc9d0 io: bind to loopback IP addrs in test suite
The test suite currently binds to 0.0.0.0 or ::, which covers
all interfaces of the machine. It is bad practice for test
suite to open publically accessible ports on a machine, so
switch to use loopback addrs 127.0.0.1 or ::1.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-22 18:19:08 +00:00
Igor Mammedov
5530427f0c acpi: extend aml_and() to accept target argument
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
ca3df95df8 acpi: extend aml_or() to accept target argument
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
a23b887281 acpi add aml_dma()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
25c1432ebe acpi: add aml_to_buffer()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
6d5ea945ce acpi: add aml_to_hexstring()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
36de884a13 acpi: extend aml_field() to support LockRule
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
dabad78b0d acpi: add aml_lgreater()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
df241999b6 acpi: add aml_lor()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
0073518dd7 acpi: add aml_sleep()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
67a5c0faa6 acpi: add aml_alias()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
c360639aee acpi: extend aml_shiftright() to accept target argument
it allows to express ShiftRight(A,B,C) syntax

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
f411199de7 acpi: add aml_to_integer()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
7b38ba9cb6 acpi: add aml_call0() helper
it will help to call a method with 0 arguments

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
7059eb4262 acpi: add aml_decrement() and aml_subtract()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
20ca520884 acpi: extend aml_add() to accept target argument
it allows to express following ASL expression:
 Add(arg1, arg2, result)

usecases that do not need to store result
should pass NULL as 3rd arg that would express
 Add(arg1, arg2,)
construct.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:21 +02:00
Igor Mammedov
439e2a6e10 acpi: aml: add helper for Opcode Arg2 Arg2 [Dst] AML pattern
Currently AML API doesn't compose terms in form of
following pattern:

   Opcode Arg2 Arg2 [Dst]

but ASL used in piix4/q35 DSDT ACPI tables uses that
form, so for clean conversion of it, AML API should
be able to handle an optional 'Dst' argumet used there.

Since above pattern is used by arithmetic/bit ops,
introduce helper that they could reuse.
It reduces code duplication in existing 5 aml_foo()
functions and also will prevent more duplication
when exiting functions are extended to support
optional 'Dst' argument.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2015-12-22 18:39:20 +02:00
Igor Mammedov
7e192a383b acpi: add aml_create_qword_field()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:20 +02:00
Xiao Guangrong
6e1db3f263 acpi: add aml_mutex(), aml_acquire(), aml_release()
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Igor Mammedov
2d3f667dc6 acpi: add aml_lgreater_equal()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2015-12-22 18:39:20 +02:00
Xiao Guangrong
52483d147b acpi: add aml_sizeof
Implement SizeOf term which is used by NVDIMM _DSM method in later patch

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Xiao Guangrong
95cb066190 acpi: add aml_derefof
Implement DeRefOf term which is used by NVDIMM _DSM method in later patch

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Xiao Guangrong
70d1fb9c0b nvdimm: add maintain info
Add NVDIMM maintainer

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Xiao Guangrong
772863954c nvdimm acpi: build ACPI nvdimm devices
NVDIMM devices is defined in ACPI 6.0 9.20 NVDIMM Devices

There is a root device under \_SB and specified NVDIMM devices are under the
root device. Each NVDIMM device has _ADR which returns its handle used to
associate MEMDEV structure in NFIT

Currently, we do not support any function on _DSM, that means, NVDIMM
label data has not been supported yet

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Xiao Guangrong
87252e1b61 nvdimm acpi: build ACPI NFIT table
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)

Currently, we only support PMEM mode. Each device has 3 structures:
- SPA structure, defines the PMEM region info

- MEM DEV structure, it has the @handle which is used to associate specified
  ACPI NVDIMM  device we will introduce in later patch.
  Also we can happily ignored the memory device's interleave, the real
  nvdimm hardware access is hidden behind host

- DCR structure, it defines vendor ID used to associate specified vendor
  nvdimm driver. Since we only implement PMEM mode this time, Command
  window and Data window are not needed

The NVDIMM functionality is controlled by the parameter, 'nvdimm', which
is introduced for the machine, there is a example to enable it:
-machine pc,nvdimm -m 8G,maxmem=100G,slots=100  -object \
memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \
nvdimm,memdev=mem1,id=nv1

It is disabled on default

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Xiao Guangrong
8870ca0e94 acpi: support specified oem table id for build_header
Let build_header() support specified OEM table id so that we can build
multiple SSDT later

If the oem table id is not specified (aka, NULL), we use the default id
instead as the previous behavior

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Xiao Guangrong
5c42eef243 nvdimm: implement NVDIMM device abstract
Introduce "nvdimm" device which is based on pc-dimm device type

Currently, nothing is specific for nvdimm but hotplug is disabled

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Cao jin
40c520418b docs/pci_expander_bridge: fix typo
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 18:39:20 +02:00
Eduardo Habkost
c9c0afbb19 hw/compat.h: Change indentation of HW_COMPAT_* to 4 spaces
Cosmetic change only.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2015-12-22 18:39:20 +02:00
Eduardo Habkost
276a65ba4b pc: Change indentation of PC_COMPAT_* to 4 spaces
Cosmetic change only.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2015-12-22 18:39:20 +02:00
Eduardo Habkost
240240d5da pc: Add pc-*-2.6 machine classes
Add pc-i440fx-2.6 and pc-q35-2.6 machine classes.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2015-12-22 18:39:19 +02:00
Eduardo Habkost
1e37b7149a pc: Remove redundant code from pc-*-2.3 machine classes
Remove the redundant 'alias = NULL' and 'is_default = 0' lines
from older machine-types. pc_*_2_4_machine_options() already
clear those fields, so they don't need to be cleared by
pc_*_2_3_machine_options().

Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2015-12-22 18:39:19 +02:00
Gerd Hoffmann
aa8abbed00 q35: skip q35-acpi-dsdt.aml load if not needed
Only old machine types which don't use the acpi builder (qemu 1.7 + older)
have to load that file for proper acpi support.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
ad2a807718 ipmi: Add a force off function
Allow the IPMI interface to request a forced power off.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
44d3db0d96 ipmi: Add firmware registration to the ISA interface
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
90b6180500 ipmi: Add a firmware configuration repository
Add a way for IPMI devices to register their firmware information
with the IPMI subsystem so that various firmware entities can pull
that information later for adding to firmware tables.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
bd66bcfca5 ipmi: Add migration capability to the IPMI devices.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
f8490451ac ipmi: Add documentation
Add some basic documentation for the IPMI device.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
24f976d30a ipmi: Add tests
Test the KCS interface with a local BMC and a BT interface with an
external BMC.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
a9b74079cb ipmi: Add a BT low-level interface
This provides the simulation of the BT hardware interface for
IPMI.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
0719029c47 ipmi: Add an ISA KCS low-level interface
This provides the simulation of the KCS hardware interface.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
67aa56fc03 ipmi: Add an external connection simulation interface
This adds an interface for IPMI that connects to a remote
BMC over a chardev (generally a TCP socket).  The OpenIPMI
lanserv simulator describes this interface, see that for
interface details.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
8bfffbccad ipmi: Add a local BMC simulation
This provides a minimal local BMC, basically enough to comply with the
spec and provide a complete watchdog timer (including a sensor, SDR,
and event).

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard
23076bb34b Add a base IPMI interface
Add the basic IPMI types and infrastructure to QEMU.  Low-level
interfaces and simulation interfaces will register with this; it's
kind of the go-between to tie them together.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Eduardo Habkost
13fc834308 pc: Group and document related PCMachineState/PCMachineclass fields
Group related PCMachineState and PCMachineClass fields into
sections, and move existing field descriptions to doc comments.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 17:45:13 +02:00
Eduardo Habkost
34be1e7c92 q35: Remove MCHPCIState.guest_info field
The field is not used for anything.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 17:45:13 +02:00
Marcel Apfelbaum
81ed6482a3 hw/i386: extend pxb query for all PC machines
Add bus property to PC machines and use it when looking
for primary PCI root bus (bus 0).

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2015-12-22 17:45:13 +02:00
Marcel Apfelbaum
02b07434be hw/pxb: introduce pxb-pcie expander for PCIe machines
The pxb-pcie is the counterpart of pxb for PCI express machines.
The new device re-uses the pxb code, but appears to the guests
as a different device. The pxb-pcie device does not have an internal
pci-pci bridge and exposes a PCIe root bus instead of a PCI one.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 17:45:13 +02:00
Marcel Apfelbaum
d7fd0e6914 hw/acpi: merge pxb adjacent memory/IO ranges
A generic PCI Bus Expander doesn't necessary have a built-in PCI bridge.
Int this case the ACPI will include IO/MEM ranges per device. Try to merge
adjacent resources to reduce the ACPI tables length.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 17:45:12 +02:00
Eduardo Habkost
71ae9e94d9 pc: Move option_rom_has_mr/rom_file_has_mr globals to MachineClass
This way, these settings can be simply set on the corresponding
machine_options() function, instead of requiring code in
pc_compat_*() functions.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 17:45:12 +02:00
Eduardo Habkost
cdedce0564 pc: Remove enforce-aligned-dimm QOM property
The property is read-only and not used for anything.

Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 17:45:12 +02:00
Eduardo Habkost
16a9e8a5bc pc: Move enforce_aligned_dimm to PCMachineClass
enforce_aligned_dimm never changes after the machine is
initialized, so it can be simply set in PCMachineClass like all
the other compat fields.

Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 17:45:12 +02:00
Eduardo Habkost
cd4040ec18 pc: Move acpi_data_size global to PCMachineClass
This way we don't need code in pc_compat_*() functions to set the legacy
acpi_data_size value.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 17:45:12 +02:00
Eduardo Habkost
2b0ddf6612 pc: Move legacy_acpi_table_size global to PCMachineClass
This way we can set legacy_acpi_table_size on the machine_options()
functions, instead of requirng code in pc_compat_*() functions.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 17:45:12 +02:00
Eduardo Habkost
7102fa7073 pc: Move compat boolean globals to PCMachineClass
This way the compat flags can be initialized in the machine_options()
function. This will help us to eventually eliminate the pc_compat_*()
functions.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 17:45:12 +02:00
Michael S. Tsirkin
097a50d0d8 mmap-alloc: tweak a comment on ppc64
The comment I put in mmap-alloc to document the ppc64 rules
refers to the previous revision of the patch:
we don't look at memory alignment anymore, we check
the fs from which the fd is mapped, instead.

It's also not clear what does "in this case" refer
to, rearrange text to make it clearer.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 17:45:12 +02:00
Peter Maydell
5dc42c186d Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Tue 22 Dec 2015 08:52:55 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  sdhci: add optional quirk property to disable card insertion/removal interrupts
  sdhci: don't raise a command index error for an unexpected response
  sd: sdhci: Delete over-zealous power check
  scripts/gdb: Fix a python exception in mtree.py
  parallels: add format spec
  block/mirror: replace IOV_MAX with blk_get_max_iov()
  block: replace IOV_MAX with BlockLimits.max_iov
  block-backend: add blk_get_max_iov()
  block: add BlockLimits.max_iov field
  virtio-blk: trivial code optimization

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-22 14:21:42 +00:00
Andrew Baumann
723697551a sdhci: add optional quirk property to disable card insertion/removal interrupts
This is needed for a quirk of the Raspberry Pi (bcm2835/6) MMC
controller, where the card insert bit is documented as unimplemented
(always reads zero, doesn't generate interrupts) but is in fact
observed on hardware as set at power on, but is cleared (and remains
clear) on subsequent controller resets.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1450738069-18664-4-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:34:26 +08:00
Andrew Baumann
62d32ec817 sdhci: don't raise a command index error for an unexpected response
This deletes a block of code that raised a command index error if a
command returned response data, but the guest did not set the
appropriate bits in the response register to handle such a response. I
cannot find any documentation that suggests the controller should
behave in this way, the error code doesn't make sense (command index
error is defined for the case where the index in a response does not
match that of the issued command), and in at least one case (CMD23
issued by UEFI on Raspberry Pi 2), actual hardware does not do this.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1450738069-18664-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:34:26 +08:00
Peter Crosthwaite
6890a695d9 sd: sdhci: Delete over-zealous power check
This check was conditionalising SD card operation on the card being
powered by the SDHCI host controller. It is however possible
(particularly in embedded systems) for the power control of the SD card
to be managed outside of SDHCI. This can be as trivial as hard-wiring
the SD slot VCC to a constant power-rail.

This means the guest SDHCI can validly opt-out of the SDHCI power
control feature while still using the card. So delete this check to
allow operation of the card with SDHCI power control.

This is needed for at least Xilinx Zynq and Raspberry Pi, and
also makes Freescale i.MX25 work for me. The digilent Zybo board
has a public schematic which shows SD VCC hardwiring:

http://digilentinc.com/Data/Products/ZYBO/ZYBO_sch_VB.3.pdf
bottom of page 3.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1450738069-18664-2-git-send-email-Andrew.Baumann@microsoft.com
[AB: Add Pi to list of devices fixed in commit message]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:34:26 +08:00
Yang Wei
d6b6913276 scripts/gdb: Fix a python exception in mtree.py
The following exception is threw:
Python Exception <class 'NameError'> name 'long' is not defined:
Error occurred in Python command: name 'long' is not defined

Python 2.4+, int()/long() have been unified, so replace long
with int.

Signed-off-by: Yang Wei <w90p710@gmail.com>
Message-id: 1449316340-4030-1-git-send-email-w90p710@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:01:08 +08:00
Vladimir Sementsov-Ogievskiy
b4a9e25b7b parallels: add format spec
This specifies Parallels image format as implemented in Parallels Cloud
Server 6.10

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1448626806-17591-1-git-send-email-den@openvz.org
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:01:07 +08:00
Stefan Hajnoczi
3515727f31 block/mirror: replace IOV_MAX with blk_get_max_iov()
Use blk_get_max_iov() instead of hardcoding IOV_MAX, which may not apply
to all BlockDrivers.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:01:07 +08:00
Stefan Hajnoczi
222565f65c block: replace IOV_MAX with BlockLimits.max_iov
Request merging must not result in a huge request that exceeds the
maximum number of iovec elements.  Use BlockLimits.max_iov instead of
hardcoding IOV_MAX.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:01:07 +08:00
Stefan Hajnoczi
648296e067 block-backend: add blk_get_max_iov()
Add a function to query BlockLimits.max_iov.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:01:07 +08:00
Stefan Hajnoczi
bd44feb754 block: add BlockLimits.max_iov field
The maximum number of struct iovec elements depends on the
BlockDriverState.  The raw-posix and iSCSI protocols have a maximum of
IOV_MAX but others could have different values.

Cc: Peter Lieven <pl@kamp.de>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:01:07 +08:00
Gonglei
49cffbc607 virtio-blk: trivial code optimization
1. avoid possible superflous checking
2. make code more robustness

["make code more robustness" refers to avoiding integer
underflows/overflows.
--Stefan]

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1447207166-12612-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:01:07 +08:00
Peter Maydell
c595b21888 Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into staging
NUMA queue, 2015-12-18

# gpg: Signature made Fri 18 Dec 2015 17:53:48 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"

* remotes/ehabkost/tags/numa-pull-request:
  numa: Clean up query-memdev error handling

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-18 18:47:17 +00:00
Markus Armbruster
2f6f826e03 numa: Clean up query-memdev error handling
qmp_query_memdev() has two error paths:

* When object_get_objects_root() returns null.  It never does, so
  simply drop the useless error handling.

* When query_memdev() fails.  It leaks err then.  But any failure
  there is actually a programming error.  Switch it to &error_abort,
  and drop the useless error handling.

Messed up in commit 76b5d85 "qmp: add query-memdev".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-12-18 15:50:24 -02:00
Peter Maydell
c688084506 Merge remote-tracking branch 'remotes/berrange/tags/pull-qcrypto-secrets-base-2015-12-18-1' into staging
Merge QCryptoSecret object support

# gpg: Signature made Fri 18 Dec 2015 16:51:21 GMT using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"

* remotes/berrange/tags/pull-qcrypto-secrets-base-2015-12-18-1:
  crypto: add support for loading encrypted x509 keys
  crypto: add QCryptoSecret object class for password/key handling
  qga: convert to use error checked base64 decode
  qemu-char: convert to use error checked base64 decode
  util: add base64 decoding function

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-18 17:04:15 +00:00
Peter Maydell
de532ff1df Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches

# gpg: Signature made Fri 18 Dec 2015 13:41:03 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (48 commits)
  block/qapi: allow best-effort query
  qemu-img: abort when full_backing_filename not present
  block/qapi: explicitly warn if !has_full_backing_filename
  block/qapi: always report full_backing_filename
  block/qapi: do not redundantly print "actual path"
  qemu-iotests: s390x: fix test 068
  qemu-iotests: s390x: fix test 051
  qemu-iotests: refine common.config
  block: fix bdrv_ioctl called from coroutine
  block: use drained section around bdrv_snapshot_delete
  iotests: Update comments for bdrv_swap() in 094
  block: Remove prototype of bdrv_swap from header
  raw-posix: Make aio=native option binding
  qcow2: insert assert into qcow2_get_specific_info()
  iotests: Extend test 112 for qemu-img amend
  qcow2: Point to amend function in check
  qcow2: Invoke refcount order amendment function
  qcow2: Add function for refcount order amendment
  qcow2: Use intermediate helper CB for amend
  qcow2: Split upgrade/downgrade paths for amend
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-18 16:34:44 +00:00
Daniel P. Berrange
1d7b5b4afd crypto: add support for loading encrypted x509 keys
Make use of the QCryptoSecret object to support loading of
encrypted x509 keys. The optional 'passwordid' parameter
to the tls-creds-x509 object type, provides the ID of a
secret object instance that holds the decryption password
for the PEM file.

 # printf "123456" > mypasswd.txt
 # $QEMU \
    -object secret,id=sec0,filename=mypasswd.txt \
    -object tls-creds-x509,passwordid=sec0,id=creds0,\
            dir=/home/berrange/.pki/qemu,endpoint=server \
    -vnc :1,tls-creds=creds0

This requires QEMU to be linked to GNUTLS >= 3.1.11. If
GNUTLS is too old an error will be reported if an attempt
is made to pass a decryption password.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 16:25:08 +00:00
Daniel P. Berrange
ac1d887849 crypto: add QCryptoSecret object class for password/key handling
Introduce a new QCryptoSecret object class which will be used
for providing passwords and keys to other objects which need
sensitive credentials.

The new object can provide secret values directly as properties,
or indirectly via a file. The latter includes support for file
descriptor passing syntax on UNIX platforms. Ordinarily passing
secret values directly as properties is insecure, since they
are visible in process listings, or in log files showing the
CLI args / QMP commands. It is possible to use AES-256-CBC to
encrypt the secret values though, in which case all that is
visible is the ciphertext.  For ad hoc developer testing though,
it is fine to provide the secrets directly without encryption
so this is not explicitly forbidden.

The anticipated scenario is that libvirtd will create a random
master key per QEMU instance (eg /var/run/libvirt/qemu/$VMNAME.key)
and will use that key to encrypt all passwords it provides to
QEMU via '-object secret,....'.  This avoids the need for libvirt
(or other mgmt apps) to worry about file descriptor passing.

It also makes life easier for people who are scripting the
management of QEMU, for whom FD passing is significantly more
complex.

Providing data inline (insecure, only for ad hoc dev testing)

  $QEMU -object secret,id=sec0,data=letmein

Providing data indirectly in raw format

  printf "letmein" > mypasswd.txt
  $QEMU -object secret,id=sec0,file=mypasswd.txt

Providing data indirectly in base64 format

  $QEMU -object secret,id=sec0,file=mykey.b64,format=base64

Providing data with encryption

  $QEMU -object secret,id=master0,file=mykey.b64,format=base64 \
        -object secret,id=sec0,data=[base64 ciphertext],\
	           keyid=master0,iv=[base64 IV],format=base64

Note that 'format' here refers to the format of the ciphertext
data. The decrypted data must always be in raw byte format.

More examples are shown in the updated docs.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 16:25:08 +00:00
Daniel P. Berrange
920639cab0 qga: convert to use error checked base64 decode
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 16:25:08 +00:00
Daniel P. Berrange
e9cf2fe07f qemu-char: convert to use error checked base64 decode
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 16:25:08 +00:00
Daniel P. Berrange
89bc0b6cae util: add base64 decoding function
The standard glib provided g_base64_decode doesn't provide any
kind of sensible error checking on its input. Add a QEMU custom
wrapper qbase64_decode which can be used with untrustworthy
input that can contain invalid base64 characters, embedded
NUL characters, or not be NUL terminated at all.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 16:25:08 +00:00
Peter Maydell
b06f904f2e Merge remote-tracking branch 'remotes/berrange/tags/pull-io-channel-vnc-2015-12-18-1' into staging
Merge VNC conversion to I/O channels

# gpg: Signature made Fri 18 Dec 2015 15:44:30 GMT using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"

* remotes/berrange/tags/pull-io-channel-vnc-2015-12-18-1:
  ui: convert VNC server to use QIOChannelWebsock
  ui: convert VNC server to use QIOChannelTLS
  ui: convert VNC server to use QIOChannelSocket

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-18 16:04:31 +00:00
Peter Maydell
6126bc5522 Merge remote-tracking branch 'remotes/sstabellini/tags/xsa155' into staging
XSA-155 fixes

# gpg: Signature made Fri 18 Dec 2015 15:16:18 GMT using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"

* remotes/sstabellini/tags/xsa155:
  xenfb: avoid reading twice the same fields from the shared page
  xen/blkif: Avoid double access to src->nr_segments

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-18 15:32:32 +00:00
Stefano Stabellini
7ea11bf376 xenfb: avoid reading twice the same fields from the shared page
Reading twice the same field could give the guest an attack of
opportunity. In the case of event->type, gcc could compile the switch
statement into a jump table, effectively ending up reading the type
field multiple times.

This is part of XSA-155.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-12-18 15:10:09 +00:00
Stefano Stabellini
f9e98e5d7a xen/blkif: Avoid double access to src->nr_segments
src is stored in shared memory and src->nr_segments is dereferenced
twice at the end of the function.  If a compiler decides to compile this
into two separate memory accesses then the size limitation could be
bypassed.

Fix it by removing the double access to src->nr_segments.

This is part of XSA-155.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-12-18 15:09:58 +00:00
Daniel P. Berrange
d5f042232c ui: convert VNC server to use QIOChannelWebsock
Remove custom websock handling code from the VNC server and use
the QIOChannelWebsock class instead.

Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 15:02:11 +00:00
Daniel P. Berrange
2cc452281e ui: convert VNC server to use QIOChannelTLS
Switch VNC server over to using the QIOChannelTLS object for
the TLS session. This removes all remaining VNC specific code
for dealing with TLS handshakes.

Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 15:02:11 +00:00
Daniel P. Berrange
04d2529da2 ui: convert VNC server to use QIOChannelSocket
The minimal first step conversion to use QIOChannelSocket
classes instead of directly using POSIX sockets API. This
will later be extended to also cover the TLS, SASL and
websockets code.

Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 15:02:11 +00:00
Kevin Wolf
9d4a6cf0ea Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2015-12-18' into queue-block
block-next patches from before the 2.5.0 release.

# gpg: Signature made Fri Dec 18 14:38:44 2015 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"

* mreitz/tags/pull-block-for-kevin-2015-12-18:
  block/qapi: allow best-effort query
  qemu-img: abort when full_backing_filename not present
  block/qapi: explicitly warn if !has_full_backing_filename
  block/qapi: always report full_backing_filename
  block/qapi: do not redundantly print "actual path"
  qemu-iotests: s390x: fix test 068
  qemu-iotests: s390x: fix test 051
  qemu-iotests: refine common.config

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:40:35 +01:00
John Snow
a5002d5302 block/qapi: allow best-effort query
For more complex BDS trees that can be created under normal circumstances,
we lose the ability to issue query commands because of our inability to
re-construct the absolute filename.

Instead, omit this field when it is a problem and present as much information
as we can.

This will change the expected output in iotest 110, where we will now see a
json filename and the lack of an absolute filename instead of an error.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1450122916-4706-6-git-send-email-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:36:17 +01:00
John Snow
92d617abc5 qemu-img: abort when full_backing_filename not present
...But only if we have the backing_filename. It means something Scary
happened and we can't really be quite exactly sure if we can trust the
backing_filename.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450122916-4706-5-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:36:17 +01:00
John Snow
5c9d9ca597 block/qapi: explicitly warn if !has_full_backing_filename
Disambiguate "Backing filename and full backing filename are equivalent"
from "full backing filename could not be determined."

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1450122916-4706-4-git-send-email-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:36:17 +01:00
John Snow
12dcb1c018 block/qapi: always report full_backing_filename
Always report full_backing_filename, even if it's the same as
backing_filename. In the next patch, full_backing_filename may be
omitted if it cannot be generated instead of allowing e.g. drive_query
to abort if it runs into this scenario.

The presence or absence of the "full" field becomes useful information.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450122916-4706-3-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:36:17 +01:00
John Snow
548e1ff379 block/qapi: do not redundantly print "actual path"
If it happens to match the backing path, that was the actual path.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450122916-4706-2-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:36:17 +01:00
Bo Tu
a41aa71c15 qemu-iotests: s390x: fix test 068
Now, s390-virtio-ccw is default machine and s390-ccw.img is default boot
loader. If the s390-virtio-ccw machine finds no device to load from and
errors out, then emits a panic and exits the vm. This breaks test cases
068 for s390x.
Adding the parameter of "-no-shutdown" for s390-ccw-virtio will pause VM
before shutdown.

Acked-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1449136891-26850-4-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:36:17 +01:00
Bo Tu
289f3ebae8 qemu-iotests: s390x: fix test 051
The tests for ide device should only be tested for the pc
platform.
Set device_id to "drive0", and replace every "-drive file..."
by "-drive file=...,if=none,id=$device_id", then x86 and s390x
can get the common output in the test of "Snapshot mode".
Warning message expected for s390x when drive without device.
A x86 platform specific output file is also needed.

Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:36:17 +01:00
Bo Tu
8a7607c2e2 qemu-iotests: refine common.config
Replacing awk with sed, then it's easier to read.
Replacing "[ ! -z "$default_alias_machine" ]" with
"[[ $default_alias_machine ]]", then it's slightly shorter.

Reviewed-by: Max Reitz <mreitz@redhat.com>
Suggested-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Eric Blake   <eblake@redhat.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1449136891-26850-2-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:36:17 +01:00
Paolo Bonzini
ba88944495 block: fix bdrv_ioctl called from coroutine
When called from a coroutine, bdrv_ioctl must be asynchronous just like
e.g. bdrv_flush.  The code was incorrectly making it synchronous, fix
it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:44 +01:00
Paolo Bonzini
27a7649a48 block: use drained section around bdrv_snapshot_delete
Do not use bdrv_drain, since by itself it does not guarantee
anything.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:44 +01:00
Fam Zheng
8382ba6153 iotests: Update comments for bdrv_swap() in 094
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:44 +01:00
Fam Zheng
bbe1ef2686 block: Remove prototype of bdrv_swap from header
The function has gone.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
d657c0c289 raw-posix: Make aio=native option binding
Traditionally, aio=native was treated as an advice that could simply be
ignored if an error occurs while initialising Linux AIO or the feature
wasn't compiled in. This behaviour was deprecated in commit 96518254
(qemu 2.3; error during init) and commit 1501ecc1 (qemu 2.5; not
compiled in).

This patch changes raw-posix to error out in these cases instead of
printing a deprecation warning.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-18 14:34:43 +01:00
Denis V. Lunev
b1fc8f934b qcow2: insert assert into qcow2_get_specific_info()
s->qcow_version is always set to 2 or 3. Let's assert if this is wrong.

Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Max Reitz
e9dbdc5e46 iotests: Extend test 112 for qemu-img amend
Add tests for conversion between different refcount widths.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Max Reitz
03bb78ed25 qcow2: Point to amend function in check
If a reference count is not representable with the current refcount
order, the image check should point to qemu-img amend for increasing the
refcount order. However, qemu-img amend needs write access to the image
which cannot be provided if the image is marked corrupt; and the image
check will not mark the image consistent unless everything actually is
consistent.

Therefore, if an image is marked corrupt and the image check encounters
a reference count overflow, it cannot be fixed by using qemu-img amend
to increase the refcount order. Instead, one has to use qemu-img convert
to create a completely new copy of the image in this case.

Alternatively, we may want to give the user a way of manually removing
the corrupt flag, maybe through qemu-img amend, but this is not part of
this patch.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Max Reitz
61ce55fc02 qcow2: Invoke refcount order amendment function
Make use of qcow2_change_refcount_order() to support changing the
refcount order with qemu-img amend.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Max Reitz
791c9a004e qcow2: Add function for refcount order amendment
Add a function qcow2_change_refcount_order() which allows changing the
refcount order of a qcow2 image.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Max Reitz
c293a80927 qcow2: Use intermediate helper CB for amend
If there is more than one time-consuming operation to be performed for
qcow2_amend_options(), we need an intermediate CB which coordinates the
progress of the individual operations and passes the result to the
original status callback.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Max Reitz
1038bbb803 qcow2: Split upgrade/downgrade paths for amend
If the image version should be upgraded, that is the first we should do;
if it should be downgraded, that is the last we should do. So split the
version change block into an upgrade part at the start and a downgrade
part at the end.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Max Reitz
164e0f89cc qcow2: Use abort() instead of assert(false)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Max Reitz
29d72431ef qcow2: Use error_report() in qcow2_amend_options()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Max Reitz
8b13976d3f block: Add opaque value to the amend CB
Add an opaque value which is to be passed to the bdrv_amend_options()
status callback.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Max Reitz
bd5072d756 progress: Allow regressing progress
Progress may regress; this should be displayed correctly by
qemu_progress_print().

While touching that area of code, drop the redundant parentheses in the
same condition.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
0a8111e0fb qemu-iotests: Test reopen with node-name/driver options
'node-name' and 'driver' should not be changed during a reopen
operation. It is, however, valid to specify them with the same value as
they already had.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
8f7acbe6ea qemu-iotests: Test cache mode option inheritance
This is doing a more complete test on setting cache modes both while
opening an image (i.e. in a -drive command line) and in reopen
situations. It checks that reopen can specify options for child nodes
and that cache modes are correctly inherited from parent nodes where
they are not specified.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
768ee459f5 qemu-iotests: Try setting cache mode for children
This is a basic test for specifying cache modes for child nodes on the
command line. It doesn't take much time and works without O_DIRECT
support.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
c5e8bfb7cd blkdebug: Enable reopen
Just reopening the children (as block.c does now) is enough.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
91a097e747 block: Move cache options into options QDict
This adds the cache mode options to the QDict, so that they can be
specified for child nodes (e.g. backing.cache.direct=off).

The cache modes are not removed from the flags at this point; instead,
options and flags are kept in sync. If the user specifies both flags and
options, the options take precedence.

Child node inherit cache modes as options now, they don't use flags any
more.

Note that this forbids specifying the cache mode for empty drives. It
didn't make sense anyway to specify it there, because it didn't have any
effect. blockdev_init() considers the cache options now bdrv_open()
options and therefore doesn't create an empty drive any more but calls
into bdrv_open(). This in turn will fail with no driver and filename
specified.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
ccf9dc07b5 block: reopen: Extract QemuOpts for generic block layer options
This patch adds a QemuOpts for generic block layer options to
bdrv_reopen_prepare(). The only two options that currently exist
(node-name and driver) cannot be changed, so the only thing we do is
putting them right back into the QDict so that we check at the end that
they are indeed unchanged.

We will add new options soon that can actually be changed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
fc17c25931 qemu-iotests: Remove cache mode test without medium
Specifying the cache mode for a driver without a medium is not a useful
thing to do: As long as there is no medium, the cache mode doesn't make
a difference, and once the 'change' command is used to insert a medium,
it ignores the old cache mode and makes the new medium use
cache=writethrough.

Later patches will make it an error to specify the cache mode for an
empty drive. Remove the corresponding test case.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
39c4ae941e blockdev: Set 'format' indicates non-empty drive
Creating an empty drive while specifying 'format' doesn't make sense.
The specified format driver would simply be ignored.

Make a set 'format' option an indication that a non-empty drive should
be created. This makes 'format' consistent with 'driver' and allows
using it with a block driver that doesn't need any other options (like
null-co/null-aio).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
145f598e4a block: Introduce bs->explicit_options
bs->options doesn't only contain options that the user explicitly
requested, but also option that were derived from flags, the filename or
inherited from the parent node.

For reopen, it is important to know the difference because reopening the
parent can change inherited values in child nodes, but it shouldn't
change any options that were explicitly specified for the child.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
de3b53f007 block: Split out parse_json_protocol()
The next patch distinguishes options that were explicitly set and
options that were derived. bdrv_fill_option() added options of both
types: Options given by json: syntax should be counted as explicit, but
the rest is derived.

In preparation for the distinction, move json: parse to a separate
function.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:43 +01:00
Kevin Wolf
8e2160e2c7 block: Add infrastructure for option inheritance
Options are not actually inherited from the parent node yet, but this
commit lays the grounds for doing so.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:42 +01:00
Kevin Wolf
2851810223 block: reopen: Document option precedence and refactor accordingly
The interesting part of reopening an image is from which sources the
effective options should be taken, i.e. which options take precedence
over which other options. This patch documents the precedence that will
be implemented in the following patches.

It also refactors bdrv_reopen_queue(), so that the top-level reopened
node is handled the same way as children are. Option/flag inheritance
from the parent becomes just one item in the list and is done at the
beginning of the function, similar to how the other items are/will be
handled.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:42 +01:00
Kevin Wolf
4c9dfe5d8a block: Allow specifying child options in reopen
If the child was defined in the same context (-drive argument or
blockdev-add QMP command) as its parent, a reopen of the parent should
work the same and allow changing options of the child.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-18 14:34:42 +01:00
Kevin Wolf
62392ebb09 block: Keep "driver" in bs->options
Instead of passing a separate drv argument to bdrv_open_common(), just
make sure that a "driver" option is set in the QDict. This also means
that a "driver" entry is consistently present in bs->options now.

This is another step towards keeping all options in the QDict (which is
the represenation of the blockdev-add QMP command).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:42 +01:00
Kevin Wolf
4cdd01d32e block: Pass driver-specific options to .bdrv_refresh_filename()
In order to decide whether a blkdebug: filename can be produced or a
json: one is necessary, blkdebug checked whether bs->options had more
options than just "config", "x-image" or "image" (the latter including
nested options). That doesn't work well when generic block layer options
are present.

This patch passes an option QDict to the driver that contains only
driver-specific options, i.e. the options for the general block layer as
well as child nodes are already filtered out. Works much better this
way.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-18 14:34:42 +01:00
Kevin Wolf
260fecf13b block: Exclude nested options only for children in append_open_options()
Some drivers have nested options (e.g. blkdebug rule arrays), which
don't belong to a child node and shouldn't be removed. Don't remove all
options with "." in their name, but check for the complete prefixes of
actually existing child nodes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:42 +01:00
Kevin Wolf
9e700c1ac6 block: Consider all block layer options in append_open_options
The code already special-cased "node-name", which is currently the only
option passed in the QDict that isn't driver-specific. Generalise the
code to take all general block layer options into consideration.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-18 14:34:42 +01:00
Kevin Wolf
d9b7b05703 block: Allow references for backing files
For bs->file, using references to existing BDSes has been possible for a
while already. This patch enables the same for bs->backing.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:42 +01:00
Kevin Wolf
40365552c2 mirror: Error out when a BDS would get two BBs
bdrv_replace_in_backing_chain() asserts that not both old and new
BlockDdriverState have a BlockBackend attached to them because both
would have to end up pointing to the new BDS and we don't support more
than one BB per BDS yet.

Before we can safely allow references to existing nodes as backing
files, we need to make sure that even if a backing file has a BB on it,
this doesn't crash qemu.

There are probably also some cases with the 'replaces' option set where
drive-mirror could fail this assertion today. They are fixed with this
error check as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18 14:34:42 +01:00
Kevin Wolf
cddff5bae1 block: Fix reopen with semantically overlapping options
This fixes bdrv_reopen() calls like the following one:

    qemu-io -c 'open -o overlap-check.template=all /tmp/test.qcow2' \
    -c 'reopen -o overlap-check=none'

The approach taken so far would result in an options QDict that has both
"overlap-check.template=all" and "overlap-check=none", which obviously
conflicts. In this case, the old option should be overridden by the
newly specified option.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-18 14:34:42 +01:00
Kevin Wolf
5365f44dfa qcow2: Add .bdrv_join_options callback
qcow2 accepts a few driver-specific options that overlap semantically
(e.g. "overlap-check" is an alias of "overlap-check.template", and any
missing cache size option is derived from the given ones).

When bdrv_reopen() merges the set of updated options with left out
options that should be kept at their old value, we need to consider this
and filter out any duplicates (which would generally cause errors
because new and old value would contradict each other).

This patch adds a .bdrv_join_options callback to BlockDriver and
implements it for qcow2.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-18 14:34:42 +01:00
John Snow
35cea22373 iotests: 124: don't reopen qcow2
Don't create two interfaces to the same drive in the recently moved
failure test.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:42 +01:00
John Snow
ce2cbc4910 iotests: 124: move incremental failure test
Code motion only, in preparation for adjusting
the setUp procedure for this test.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:42 +01:00
John Snow
1b19bb9d17 iotests: 124: Split into two test classes
Split it into an abstract test class and an implementation class.

The split is primarily to facilitate more flexible setUp variations
for other kinds of tests without having to rewrite or shuffle around
all of these helpers.

See the following two patches for more of the "why."

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18 14:34:42 +01:00
Peter Maydell
18f49881cf configure: Fix shell syntax to placate OpenBSD's pdksh
Unfortunately the OpenBSD pdksh does not like brackets inside
the right part of a ${variable+word} parameter expansion:

  $ echo "${a+($b)}"
  ksh: ${a+($b)}": bad substitution

though both bash and dash accept them. In any case this line
was causing odd output in the case where nettle is not present:
  nettle    no ()

(because if nettle is not present then $nettle will be "no",
not a null string or unset).

Rewrite it to just use an if.

This bug was originally introduced in becaeb726 and was present
in the 2.4.0 release.

Fixes: https://bugs.launchpad.net/qemu/+bug/1525682
Reported-by: Dmitrij D. Czarkoff
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1450105357-8516-1-git-send-email-peter.maydell@linaro.org
2015-12-18 13:32:49 +00:00
Peter Maydell
67a7084062 Merge remote-tracking branch 'remotes/berrange/tags/pull-io-channel-base-2015-12-18-1' into staging
Merge I/O channels base classes

# gpg: Signature made Fri 18 Dec 2015 12:18:38 GMT using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"

* remotes/berrange/tags/pull-io-channel-base-2015-12-18-1:
  io: add QIOChannelBuffer class
  io: add QIOChannelCommand class
  io: add QIOChannelWebsock class
  io: add QIOChannelTLS class
  io: add QIOChannelFile class
  io: add QIOChannelSocket class
  io: add QIOTask class for async operations
  io: add helper module for creating watches on FDs
  io: add abstract QIOChannel classes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-18 12:42:10 +00:00
Daniel P. Berrange
d98e4eb7de io: add QIOChannelBuffer class
Add a QIOChannel subclass that is capable of performing I/O
to/from a memory buffer. This implementation does not attempt
to support concurrent readers & writers. It is designed for
serialized access where by a single thread at a time may write
data, seek and then read data back out.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 12:18:31 +00:00
Daniel P. Berrange
195e14d026 io: add QIOChannelCommand class
Add a QIOChannel subclass that is capable of performing I/O
to/from a separate process, via a pair of pipes. The command
can be used for unidirectional or bi-directional I/O.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 12:18:31 +00:00
Daniel P. Berrange
2d1d0e70cf io: add QIOChannelWebsock class
Add a QIOChannel subclass that can run the websocket protocol over
the top of another QIOChannel instance. This initial implementation
is only capable of acting as a websockets server. There is no support
for acting as a websockets client yet.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 12:18:31 +00:00
Daniel P. Berrange
ed8ee42c40 io: add QIOChannelTLS class
Add a QIOChannel subclass that can run the TLS protocol over
the top of another QIOChannel instance. The object provides a
simplified API to perform the handshake when starting the TLS
session. The layering of TLS over the underlying channel does
not have to be setup immediately. It is possible to take an
existing QIOChannel that has done some handshake and then swap
in the QIOChannelTLS layer. This allows for use with protocols
which start TLS right away, and those which start plain text
and then negotiate TLS.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 12:18:31 +00:00
Daniel P. Berrange
d6e48869a4 io: add QIOChannelFile class
Add a QIOChannel subclass that is capable of operating on things
that are files, such as plain files, pipes, character/block
devices, but notably not sockets.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 12:18:31 +00:00
Daniel P. Berrange
559607ea17 io: add QIOChannelSocket class
Implement a QIOChannel subclass that supports sockets I/O.
The implementation is able to manage a single socket file
descriptor, whether a TCP/UNIX listener, TCP/UNIX connection,
or a UDP datagram. It provides APIs which can listen and
connect either asynchronously or synchronously. Since there
is no asynchronous DNS lookup API available, it uses the
QIOTask helper for spawning a background thread to ensure
non-blocking operation.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 12:18:31 +00:00
Daniel P. Berrange
b02db2d920 io: add QIOTask class for async operations
A number of I/O operations need to be performed asynchronously
to avoid blocking the main loop. The caller of such APIs need
to provide a callback to be invoked on completion/error and
need access to the error, if any. The small QIOTask provides
a simple framework for dealing with such probes. The API
docs inline provide an outline of how this is to be used.

Some functions don't have the ability to run asynchronously
(eg getaddrinfo always blocks), so to facilitate their use,
the task class provides a mechanism to run a blocking
function in a thread, while triggering the completion
callback in the main event loop thread. This easily allows
any synchronous function to be made asynchronous, albeit
at the cost of spawning a thread.

In this series, the QIOTask class will be used for things like
the TLS handshake, the websockets handshake and TCP connect()
progress.

The concept of QIOTask is inspired by the GAsyncResult
interface / GTask class in the GIO libraries. The min
version requirements on glib don't allow those to be
used from QEMU, so QIOTask provides a facsimilie which
can be easily switched to GTask in the future if the
min version is increased.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 12:18:30 +00:00
Daniel P. Berrange
1c809fa01d io: add helper module for creating watches on FDs
A number of the channel implementations will require the
ability to create watches on file descriptors / sockets.
To avoid duplicating this code in each channel, provide a
helper API for dealing with file descriptor watches.

There are two watch implementations provided. The first
is useful for bi-directional file descriptors such as
sockets, regular files, character devices, etc. The
second works with a pair of unidirectional file descriptors
such as pipes.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 12:18:05 +00:00
Daniel P. Berrange
666a3af9c8 io: add abstract QIOChannel classes
Start the new generic I/O channel framework by defining a
QIOChannel abstract base class. This is designed to feel
similar to GLib's GIOChannel, but with the addition of
support for using iovecs, qemu error reporting, file
descriptor passing, coroutine integration and use of
the QOM framework for easier sub-classing.

The intention is that anywhere in QEMU that almost
anywhere that deals with sockets will use this new I/O
infrastructure, so that it becomes trivial to then layer
in support for TLS encryption. This will at least include
the VNC server, char device backend and migration code.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 12:18:05 +00:00
Peter Maydell
6a6533213d Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* KVM: synic support, split irqchip support
* memory: cleanups, optimizations, ioeventfd emulation
* SCSI: small fixes, vmw_pvscsi compatibility improvements
* qemu_log cleanups
* Coverity model improvements

# gpg: Signature made Thu 17 Dec 2015 16:35:21 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (45 commits)
  coverity: Model g_memdup()
  coverity: Model g_poll()
  scsi: always call notifier on async cancellation
  scsi: use scsi_req_cancel_async when purging requests
  target-i386: kvm: clear unusable segments' flags in migration
  rcu: optimize rcu_read_lock
  memory: try to inline constant-length reads
  memory: inline a few small accessors
  memory: extract first iteration of address_space_read and address_space_write
  memory: split address_space_read and address_space_write
  memory: avoid unnecessary object_ref/unref
  memory: reorder MemoryRegion fields
  exec: make qemu_ram_ptr_length more similar to qemu_get_ram_ptr
  exec: always call qemu_get_ram_ptr within rcu_read_lock
  linux-user: convert DEBUG_SIGNAL logging to tracepoints
  linux-user: avoid "naked" qemu_log
  user: introduce "-d page"
  xtensa: avoid "naked" qemu_log
  tricore: avoid "naked" qemu_log
  ppc: cleanup logging
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 18:07:09 +00:00
Markus Armbruster
29cd81ffe3 coverity: Model g_memdup()
We model all the non-deprecated memory allocation functions from
https://developer.gnome.org/glib/stable/glib-Memory-Allocation.html
except for g_memdup(), g_clear_pointer(), g_steal_pointer().  We don't
use the latter two.  Model the former.

Coverity now reports an OVERRUN
vl.c:2317: alloc_strlen: Allocating insufficient memory for the terminating null of the string.
Correct, but we omit the terminating null intentionally there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448901152-11716-1-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Markus Armbruster
1e819697c9 coverity: Model g_poll()
In my testing, Coverity reported two more CHECKED_RETURN:

* qemu-char.c:1248: fixed in commit c1f2448: "qemu-char: retry g_poll
  on EINTR".

* migration/qemu-file-unix.c:75: harmless, cleaned up in commit
  4e39f57 "migration: Clean up use of g_poll() in
  socket_writev_buffer()

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450336833-27710-1-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Paolo Bonzini
36896bffd1 scsi: always call notifier on async cancellation
This was found by code inspection.  If the request is cancelled twice,
the notifier is never called on the second cancellation request,
and hence for example a TMF might never finish.

All the calls in scsi_req_cancel_async are idempotent, so the change
is safe.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1450290827-30508-2-git-send-email-pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Paolo Bonzini
8aad35f678 scsi: use scsi_req_cancel_async when purging requests
This avoids calls to aio_poll without having acquired the context first.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1450290827-30508-1-git-send-email-pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Michael Chapman
4cae9c9796 target-i386: kvm: clear unusable segments' flags in migration
This commit fixes migration of a QEMU/KVM guest from kernel >= v3.9 to
kernel <= v3.7 (e.g. from RHEL 7 to RHEL 6). Without this commit a guest
migrated across these kernel versions fails to resume on the target host
as its segment descriptors are invalid.

Two separate kernel commits combined together to result in this bug:

  commit f0495f9b9992f80f82b14306946444b287193390
  Author: Avi Kivity <avi@redhat.com>
  Date:   Thu Jun 7 17:06:10 2012 +0300

      KVM: VMX: Relax check on unusable segment

      Some userspace (e.g. QEMU 1.1) munge the d and g bits of segment
      descriptors, causing us not to recognize them as unusable segments
      with emulate_invalid_guest_state=1.  Relax the check by testing for
      segment not present (a non-present segment cannot be usable).

      Signed-off-by: Avi Kivity <avi@redhat.com>

  commit 25391454e73e3156202264eb3c473825afe4bc94
  Author: Gleb Natapov <gleb@redhat.com>
  Date:   Mon Jan 21 15:36:46 2013 +0200

      KVM: VMX: don't clobber segment AR of unusable segments.

      Usability is returned in unusable field, so not need to clobber entire
      AR. Callers have to know how to deal with unusable segments already
      since if emulate_invalid_guest_state=true AR is not zeroed.

      Signed-off-by: Gleb Natapov <gleb@redhat.com>
      Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

The first commit changed the KVM_SET_SREGS ioctl so that it did no treat
segment flags == 0 as an unusable segment, instead only looking at the
"present" flag.

The second commit changed KVM_GET_SREGS so that it did not clear the
flags of an unusable segment.

Since QEMU does not itself maintain the "unusable" flag across a
migration, the end result is that unusable segments read from a kernel
with these commits and loaded into a kernel without these commits are
not properly recognised as being unusable.

This commit updates both get_seg and set_seg so that the problem is
avoided even when migrating to or migrating from a QEMU without this
commit. In get_seg, we clear the segment flags if the segment is marked
unusable. In set_seg, we mark the segment unusable if the segment's
"present" flag is not set.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Message-Id: <1449464047-17467-1-git-send-email-mike@very.puzzling.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Paolo Bonzini
f6d153f1bf rcu: optimize rcu_read_lock
rcu_read_lock cannot change rcu_gp_ongoing from true to false
(the previous value of p_rcu_reader->ctr is zero), hence
there is no need to check p_rcu_reader->waiting and wake up
a concurrent synchronize_rcu.

While at it mark the wakeup as unlikely in rcu_read_unlock.

Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1450265542-4323-1-git-send-email-pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Paolo Bonzini
3cc8f88499 memory: try to inline constant-length reads
memcpy can take a large amount of time for small reads and writes.
Handle the common case of reading s/g descriptors from memory (there
is no corresponding "write" case that is as common, because writes
often use address_space_st* functions) by inlining the relevant
parts of address_space_read into the caller.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Paolo Bonzini
1619d1fe73 memory: inline a few small accessors
These are used in the address_space_* fast paths.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Paolo Bonzini
a203ac702e memory: extract first iteration of address_space_read and address_space_write
We want to inline the case where there is only one iteration, because
then the compiler can also inline the memcpy.  As a start, extract
everything after the first address_space_translate call.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Paolo Bonzini
eb7eeb8862 memory: split address_space_read and address_space_write
Rather than dispatching on is_write for every iteration, make
address_space_rw call one of the two functions.  The amount of
duplicate logic is pretty small, and memory_access_is_direct can
be tweaked so that it inlines better in the callers.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
612263cf33 memory: avoid unnecessary object_ref/unref
For the common case of DMA into non-hotplugged RAM, it is unnecessary
but expensive to do object_ref/unref.  Add back an owner field to
MemoryRegion, so that these memory regions can skip the reference
counting.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
a676854f34 memory: reorder MemoryRegion fields
Order fields so that all fields accessed during a RAM read/write fit in
the same cache line.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
e81bcda529 exec: make qemu_ram_ptr_length more similar to qemu_get_ram_ptr
Notably, use qemu_get_ram_block to enjoy the MRU optimization.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
49b24afcb1 exec: always call qemu_get_ram_ptr within rcu_read_lock
Simplify the code and document the assumption.  The only caller
that is not within rcu_read_lock is memory_region_get_ram_ptr.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
c8ee0a445a linux-user: convert DEBUG_SIGNAL logging to tracepoints
"Unimplemented" messages go to stderr, everything else goes to tracepoints

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
120a9848c2 linux-user: avoid "naked" qemu_log
Ensure that all log writes are protected by qemu_loglevel_mask or,
in serious cases, go to both the log and stderr.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
1382902055 user: introduce "-d page"
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
c30f0d182f xtensa: avoid "naked" qemu_log
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
b81b971c7a tricore: avoid "naked" qemu_log
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
48880da696 ppc: cleanup logging
Avoid "naked" qemu_log, bring documentation for DEBUG #defines
up to date.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
aafcf80e22 s390x: avoid "naked" qemu_log
Convert to debug-only qemu_log.

Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
1d512a65ac microblaze: avoid "naked" qemu_log
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini
79e8ed3597 cris: avoid "naked" qemu_log
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:47 +01:00
Paolo Bonzini
c6ce9f176f alpha: convert "naked" qemu_log to tracepoint
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:47 +01:00
Paolo Bonzini
013a29424c qemu-log: introduce qemu_log_separate
In some cases, the same message is printed both on stderr and in the log.
Avoid duplicate output in the default case where stderr _is_ the log,
and standardize this to stderr+log where it used to use stdio+log.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:47 +01:00
Olga Krishtal
31e38a22a0 qemu-char: append opt to stop truncation of serial file
Our QA team wants to preserve serial output of the guest in between QEMU
runs to perform post-analysis.

By default this behavior is off (file is truncated each time QEMU is
started or device is plugged).

Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1449211324-17856-1-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:47 +01:00
Paolo Bonzini
15eafc2e60 kvm: x86: add support for KVM_CAP_SPLIT_IRQCHIP
This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:

    1.) The PIC, PIT, and IOAPIC are implemented in userspace while
    the LAPIC is implemented by KVM.

    2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
    kvm_set_irq. Interrupt delivery is configured via the MSI routing
    table, for which routes are reserved in target-i386/kvm.c then
    configured in hw/intc/ioapic.c

    3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
    which is handled in target-i386/kvm.c and relayed to the software
    IOAPIC via ioapic_eoi_broadcast.

Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:47 +01:00
Matt Gingell
32c18a2dba kvm: add support for -machine kernel_irqchip=split
This patch adds the initial plumbing for split IRQ chip mode via
KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of
kvm_*_in_kernel macros are defined to help clarify which component is
where.

Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:15:40 +01:00
Andrey Smetanin
ff99aa64b1 target-i386/kvm: Hyper-V SynIC timers MSR's support
Hyper-V SynIC timers are host timers that are configurable
by guest through corresponding MSR's (HV_X64_MSR_STIMER*).
Guest setup and use fired by host events(SynIC interrupt
and appropriate timer expiration message) as guest clock
events.

The state of Hyper-V SynIC timers are stored in corresponding
MSR's. This patch seria implements such MSR's support and migration.

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Denis V. Lunev <den@openvz.org>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: kvm@vger.kernel.org

Message-Id: <1448464885-8300-3-git-send-email-asmetanin@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:35 +01:00
Andrey Smetanin
b67dbb7070 hw/misc: Hyper-V test device 'hyperv-testdev'
'hyperv-testdev' will be used by kvm-unit-tests
to setup Hyper-V SynIC SINT's routing and to inject
Hyper-V SynIC SINT's.

Hyper-V test device is ISA type device that creates 0x3000
IO memory region and catches write access into it. Every
write operation data decoded into ctl code and parameters
for Hyper-V test device.

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:35 +01:00
Andrey Smetanin
50efe82c3c target-i386/hyperv: Hyper-V SynIC SINT routing and vcpu exit
Hyper-V SynIC(synthetic interrupt controller) helpers for
Hyper-V SynIC irq routing setup, irq injection, irq ack
notifications event/message pages changes tracking for future use.

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Andrey Smetanin
977a8d9c0d kvm: Hyper-V SynIC irq routing support
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Andrey Smetanin
866eea9a13 target-i386/kvm: Hyper-V SynIC MSR's support
This patch does Hyper-V Synthetic interrupt
controller(Hyper-V SynIC) MSR's support and
migration. Hyper-V SynIC is enabled by cpu's
'hv-synic' option.

This patch does not allow cpu creation if
'hv-synic' option specified but kernel
doesn't support Hyper-V SynIC.

Changes v3:
* removed 'msr_hv_synic_version' migration because
it's value always the same
* moved SynIC msr's initialization into kvm_arch_init_vcpu

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Paolo Bonzini
fff02bc00b linux-headers: update from kvm/next
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
d5da3ef2e2 vmw_pvscsi: Introduce 'x-disable-pcie' backword compatability property
Following the previous patch which changed pvscsi to be a pci express
device, this patch introduces a boolean property 'x-disable-pcie'.

Its default value is false, exposing pvscsi as a pcie device.

Setting 'x-disable-pcie' to 'on' preserves the old 'pci device' (non
express) behavior. This allows migration to older versions.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-7-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
1dd1305e66 vmw_pvscsi: The pvscsi device is a PCIE endpoint
Report the 'express endpoint' capability if on a PCIE bus.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-6-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
e2d4f3f75b vmw_pvscsi: coding: Introduce PVSCSIClass
Introduce a class type for pvscsi, and the usual
DEVICE_CLASS/DEVICE_GET_CLASS macros.

No semantic change.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-5-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
952970ba56 vmw_pvscsi: Introduce 'x-old-pci-configuration' backword compatability property
Following the previous patches, which introduced various changes in
pvscsi's pci configuration space (device subsystem id and revision, msi
offset), this patch introduces a boolean property
'x-old-pci-configuration' to pvscsi.

Its default value is false, exposing the above changes in the pci config
space.

Setting 'x-old-pci-configuration' to 'on' preserves the old behavior,
which allows migration to older versions.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-4-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
836fc48cbc vmw_pvscsi: Change offset of msi pci capability
Place device reported MSI capability at the same offset as placed by
the VMware virtual hardware - at offset 0x7c.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-3-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
d29d4ff8ef vmw_pvscsi: Set device subsystem and revision
To be VMware PVSCSI SCSI Controller, rev 02.
As reported by the VMware virtual hardware.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-2-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Pavel Fedin
8c56c1a592 memory: emulate ioeventfd
The ioeventfd mechanism is used by vhost, dataplane, and virtio-pci to
turn guest MMIO/PIO writes into eventfd file descriptor events.  This
allows arbitrary threads to be notified when the guest writes to a
specific MMIO/PIO address.

qtest and TCG do not support ioeventfd because memory writes are not
checked against registered ioeventfds in QEMU.  This patch implements
this in memory_region_dispatch_write() so qtest can use ioeventfd.

Also this patch fixes vhost aborting on some misconfigured old kernels
like 3.18.0 on ARM. It is possible to explicitly enable CONFIG_EVENTFD
in expert settings, while MMIO binding support in KVM will still be
missing.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <006e01d12377$0b9c2d40$22d487c0$@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Andrew Jones
bc92e4e97e kvm-all: PAGE_SIZE should be real host page size
Just noticed this while grepping TARGET_PAGE_SIZE for an unrelated
reason. I didn't use qemu_real_host_page_size as kvm_set_phys_mem()
does, because we'd need to make sure page_size_init() has run first.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1447115022-4142-1-git-send-email-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Eduardo Habkost
2f3a2bb15e exec: Remove unnecessary RAM_FILE flag
The only code that sets RAMBlock.fd is file_ram_alloc(), and the only
code that calls file_ram_alloc() sets the RAM_FILE flag. That means the
flag is always set when RAMBlock.fd >= 0, and the munmap() call at
reclaim_ramblock() is dead code that never runs.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446847881-9385-1-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Eduardo Habkost
fc3e7665d7 memory: Eliminate memory_region_destructor_ram_from_ptr()
The function is equivalent to memory_region_destructor_ram(), so
it's not needed anymore.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446844805-14492-3-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Eduardo Habkost
a29ac16632 exec: Eliminate qemu_ram_free_from_ptr()
Replace qemu_ram_free_from_ptr() with qemu_ram_free().

The only difference between qemu_ram_free_from_ptr() and
qemu_ram_free() is that g_free_rcu() is used instead of
call_rcu(reclaim_ramblock). We can safely replace it because:

* RAM blocks allocated by qemu_ram_alloc_from_ptr() always have
  RAM_PREALLOC set;
* reclaim_ramblock(block) will do nothing except g_free(block)
  if RAM_PREALLOC is set at block->flags.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446844805-14492-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:33 +01:00
Peter Maydell
e5fbe28e54 Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20151217-1' into staging
target-arm queue:
 * i.MX CCM patches
 * support guest debug for AArch64 KVM
 * support power button on virt board via GPIO
 * clean up AArch32 singlestep code
 * raise exception on misaligned LDREX operands
 * soc-dma: use hwaddr instead of target_ulong in printf
 * explicitly mark some ARM device loads as little-endian
 * i.MX: add support for lower and upper interrupt in GPIO

# gpg: Signature made Thu 17 Dec 2015 13:38:09 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20151217-1: (25 commits)
  i.MX: Add an i.MX25 specific CCM class/instance
  i.MX: Split the CCM class into an abstract base class and a concrete class
  i.MX: rename i.MX CCM get_clock() function and CLK ID enum names
  i.MX: Fix i.MX31 default/reset configuration
  tests/guest-debug: introduce basic gdbstub tests
  target-arm: kvm - re-inject guest debug exceptions
  target-arm: kvm - add support for HW assisted debug
  target-arm: kvm - support for single step
  target-arm: kvm - implement software breakpoints
  target-arm: kvm64 - introduce kvm_arm_init_debug()
  ARM: Virt: Add gpio-keys node for Poweroff using DT
  ARM: Virt: Add QEMU powerdown notifier and hook it to GPIO Pin 3
  ARM: ACPI: Add _E03 for Power Button
  ACPI: Add aml_gpio_int() wrapper for GPIO Interrupt Connection
  ACPI: Add GPIO Connection Descriptor
  ARM: ACPI: Add power button device in ACPI DSDT table
  ARM: ACPI: Add GPIO controller in ACPI DSDT table
  ARM: Virt: Add a GPIO controller
  acpi: extend aml_interrupt() to support multiple irqs
  acpi: support serialized method
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:38:34 +00:00
Jean-Christophe Dubois
92eccc6e13 i.MX: Add an i.MX25 specific CCM class/instance
With this CCM, i.MX25 timer is accurate with "real world time".

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:16 +00:00
Jean-Christophe Dubois
cb54d868c6 i.MX: Split the CCM class into an abstract base class and a concrete class
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.

IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.

For now the i.MX25 continues to use the i.MX31 CCM implementation.

An i.MX25 specific CCM will be introduced in a later patch.

We also rework initialization to stop using deprecated sysbus device init.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Jean-Christophe Dubois
aaa9ec3b4d i.MX: rename i.MX CCM get_clock() function and CLK ID enum names
This is to prepare for CCM code refactoring.

This is just a bit of function and enum values renaming.

We also remove some useless intermediate variables.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 53c4d9b9611988a5f56f178f285e04490747925e.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Jean-Christophe Dubois
9de46a0aa3 i.MX: Fix i.MX31 default/reset configuration
Linux on i.MX31/KZM is expecting the CCM to use the CKIH ref clock
instead of the CKIL plus the FPM multiplier.

We change the CCMR reg reset value to match linux expected config.

This allows the CCM to provide a 39MHz clk (as expected by linux)
instead of the actual 50MHz.

With this change the "sleep 60" command on linux is time accurate
with "real world time".

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 6dc5bc4e0a450b20cecdb2991112e7281b653345.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée
261f4d6d3e tests/guest-debug: introduce basic gdbstub tests
The aim of these tests is to combine with an appropriate kernel
image (with symbol-file vmlinux) and check it behaves as it should.
Given a kernel it checks:

  - single step
  - software breakpoint
  - hardware breakpoint
  - access, read and write watchpoints

On success it returns 0 to the calling process.

I've not plumbed this into the "make check" logic though as we need a
solution for providing non-host binaries to the tests. However the test
is structured to work with pretty much any Linux kernel image as it
uses the basic kernel_init code which is common across architectures.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-7-git-send-email-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée
34c45d5302 target-arm: kvm - re-inject guest debug exceptions
If we can't find details for the debug exception in our debug state
then we can assume the exception is due to debugging inside the guest.
To inject the exception into the guest state we re-use the TCG exception
code (do_interrupt).

However while guest debugging is in effect we currently can't handle the
guest using single step as we will keep trapping to back to userspace.
GDB makes heavy use of single-step behind the scenes which effectively
means the guest's ability to debug itself is disabled while it is being
debugged.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-6-git-send-email-alex.bennee@linaro.org
[PMM: Fixed a few typos in comments and commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée
e4482ab7e3 target-arm: kvm - add support for HW assisted debug
This adds basic support for HW assisted debug. The ioctl interface to
KVM allows us to pass an implementation defined number of break and
watch point registers. When KVM_GUESTDBG_USE_HW is specified these
debug registers will be installed in place on the world switch into the
guest.

The hardware is actually capable of more advanced matching but it is
unclear if this expressiveness is available via the gdbstub protocol.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-5-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée
26ae593485 target-arm: kvm - support for single step
This adds support for single-step. There isn't much to do on the QEMU
side as after we set-up the request for single step via the debug ioctl
it is all handled within the kernel.

The actual setting of the KVM_GUESTDBG_SINGLESTEP flag is already in the
common code. If the kernel doesn't support guest debug the ioctl will
simply error.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-4-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée
2ecb2027bc target-arm: kvm - implement software breakpoints
These don't involve messing around with debug registers, just setting
the breakpoint instruction in memory. GDB will not use this mechanism if
it can't access the memory to write the breakpoint.

All the kernel has to do is ensure the hypervisor traps the breakpoint
exceptions and returns to userspace.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-3-git-send-email-alex.bennee@linaro.org
[PMM: Fixed typo in comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Alex Bennée
29eb3d9a91 target-arm: kvm64 - introduce kvm_arm_init_debug()
As we haven't always had guest debug support we need to probe for it.
Additionally we don't do this in the start-up capability code so we
don't fall over on old kernels.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-2-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:14 +00:00
Shannon Zhao
3e6ebb64a3 ARM: Virt: Add gpio-keys node for Poweroff using DT
Add a gpio-keys node. This is used for Poweroff for the systems which
use DT not ACPI.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-11-git-send-email-zhaoshenglong@huawei.com
[PMM: use "standard-headers/linux/input.h" rather than <linux/input.h>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:14 +00:00
Shannon Zhao
4bedd8495b ARM: Virt: Add QEMU powerdown notifier and hook it to GPIO Pin 3
Currently mach-virt model doesn't support powerdown request. Guest VM
doesn't react to system_powerdown from monitor console (or QMP) because
there is no communication mechanism for such requests. This patch registers
GPIO Pin 3 with powerdown notification. So guest VM can receive notification
when such powerdown request is triggered.

Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-10-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:14 +00:00
Shannon Zhao
c1a158b7ed ARM: ACPI: Add _E03 for Power Button
Here GPIO pin 3 is used for Power Button, add _E03 in ACPI DSDT table.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-9-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:14 +00:00
Shannon Zhao
37d0e98006 ACPI: Add aml_gpio_int() wrapper for GPIO Interrupt Connection
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1449804086-3464-8-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:14 +00:00
Shannon Zhao
4ecdc746e9 ACPI: Add GPIO Connection Descriptor
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1449804086-3464-7-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:14 +00:00
Shannon Zhao
ac6aa59a21 ARM: ACPI: Add power button device in ACPI DSDT table
Add power button device in ACPI DSDT table.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1449804086-3464-6-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:14 +00:00
Shannon Zhao
aeb1a36d65 ARM: ACPI: Add GPIO controller in ACPI DSDT table
Add GPIO controller in ACPI DSDT table. It can be used for gpio event.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-5-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:14 +00:00
Shannon Zhao
b0a3721e44 ARM: Virt: Add a GPIO controller
ACPI 5.0 supports GPIO-signaled ACPI Events. This can be used for
powerdown, hotplug evnets. Add a GPIO controller in machine virt,
to support powerdown, maybe can be used for cpu hotplug. And
here we use pl061.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Igor Mammedov
45fcf53940 acpi: extend aml_interrupt() to support multiple irqs
ASL Interrupt() macro translates to Extended Interrupt Descriptor
which supports variable number of IRQs. It will be used for
conversion of ASL code for pc/q35 machines that use it for
returning several IRQs in _PSR object.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1449804086-3464-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Xiao Guangrong
4dbfc88149 acpi: support serialized method
Add serialized method support so that explicit Mutex can be
avoided

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1449804086-3464-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Sergey Fedorov
7999a5c8f6 target-arm: Fix and improve AA32 singlestep translation completion code
The AArch32 translation completion code for singlestep enabled/active
case was a way more confusing and too repetitive then it needs to be.
Probably that was the cause for a bug to be introduced into it at some
point. The bug was that SWI/HVC/SMC exception would be generated in
condition-failed instruction code path whereas it shouldn't.

This patch rewrites the code in a way similar to the non-singlestep
case.

In the condition-passed/unconditional instruction code path we need to:
 - Write the condexec bits back to the CPU state
 - Advance the singlestep state machine and generate a corresponding
   exception in case of SWI/HVC/SMC
 - Write the PC back to the CPU state if it hasn't already been written
   and generate an appropriate singlestep exception otherwise

In the condition-failed instruction code path we need to:
 - Set a TCG label to jump to it if the condition is failed
 - Write the condexec bits back to the CPU state
 - Write the PC back to the CPU state since it hasn't been written in
   this case
 - Generate an appropriate singlestep exception

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1448474560-22475-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Andrew Baumann
30901475b9 target-arm: raise exception on misaligned LDREX operands
Qemu does not generally perform alignment checks. However, the ARM ARM
requires implementation of alignment exceptions for a number of cases
including LDREX, and Windows-on-ARM relies on this.

This change adds plumbing to enable alignment checks on loads using
MO_ALIGN, a do_unaligned_access hook to raise the exception (data
abort), and uses the new aligned loads in LDREX (for all but
single-byte loads).

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1449167808-5656-1-git-send-email-Andrew.Baumann@microsoft.com
[PMM: set WnR bits in syndrome and FSR as appropriate]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Paolo Bonzini
580106df5f arm: soc-dma: use hwaddr instead of target_ulong in printf
This is a first baby step towards removing widespread inclusion of
cpu.h and compiling more devices once (so that arm, aarch64 and
in the future target-multi can share the object files).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: changed __FUNCTION__ to __func__ since we're touching
 these lines of code anyway]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Paolo Bonzini
58f6d82fc4 arm: explicitly mark device loads as little-endian
Behaviour of emulated devices should not depend on the endianness
of the CPU, so avoid using the endian-dependent load and store
functions in the PXA2xx and OMAP display devices. These devices
are little endian when they do DMA access.

(Since ARM softmmu is always compiled as little endian, this means
that the endian-dependent load and store functions are always little
endian, so this commit makes no functionally visible change.)

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Jean-Christophe Dubois
f1f7e4bf76 i.MX: add support for lower and upper interrupt in GPIO.
The i.MX6 GPIO device supports 2 interrupts instead of one.

* 1 for the lower 16 GPIOs.
* 1 for the upper 16 GPIOs.

i.MX31 and i.MX25 only support 1 interrupt for the 32 GPIOs.

So we add a property to turn the behavior on when required.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1447497668-1603-1-git-send-email-jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Peter Maydell
98557acf92 Merge remote-tracking branch 'remotes/kraxel/tags/pull-fw-cfg-20151217-1' into staging
fw_cfg: doc updates, various optimizations.

# gpg: Signature made Thu 17 Dec 2015 08:59:32 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-fw-cfg-20151217-1:
  fw_cfg: replace ioport data read with generic method
  fw_cfg: add generic non-DMA read method
  fw_cfg: avoid calculating invalid current entry pointer
  fw_cfg: remove offset argument from callback prototype
  fw_cfg: amend callback behavior spec to once per select
  fw_cfg: move internal function call docs to header file

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 12:40:07 +00:00
Peter Maydell
c1a5f950cd Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-12-17' into staging
QAPI patches for 2015-12-17

# gpg: Signature made Thu 17 Dec 2015 07:33:41 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-qapi-2015-12-17: (40 commits)
  qapi: Detect base class loops
  qapi: Move duplicate collision checks to schema check()
  qapi: Enforce (or whitelist) case conventions on qapi members
  qapi: Track enum values by QAPISchemaMember, not string
  qapi: Prepare new QAPISchemaMember base class
  qapi: Shorter visits of optional fields
  qapi: Simplify visits of optional fields
  qapi: Fix alternates that accept 'number' but not 'int'
  qapi: Inline _make_implicit_tag()
  qapi-types: Drop unnedeed ._fwdefn
  qapi: Simplify visiting of alternate types
  qapi: Convert QType into QAPI built-in enum type
  qobject: Rename qtype_code to QType
  qobject: Simplify QObject
  qapi: Change munging of CamelCase enum values
  qapi: Add alias for ErrorClass
  cpu: Convert CpuInfo into flat union
  qapi: Remove obsolete tests for MAX collision
  qapi: Don't let implicit enum MAX member collide
  qapi: Tighten the regex on valid names
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 11:50:46 +00:00
Peter Maydell
fc77eb20d7 Merge remote-tracking branch 'remotes/kraxel/tags/pull-audio-20151215-1' into staging
coreaudio: use new-in-OSX-10.6 APIs, cleanups.

# gpg: Signature made Tue 15 Dec 2015 10:15:24 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-audio-20151215-1:
  audio/coreaudio.c: Avoid deprecated AudioDeviceAdd/RemoveIOProc APIs
  audio/coreaudio.c: Use new-in-OSX-10.6 APIs when available
  audio/coreaudio.c: Factor out uses of AudioDeviceGet/SetProperty
  audio/coreaudio.c: Use new-in-OSX-10.6 API for getting default voice
  audio/coreaudio.c: Factor out use of AudioHardwareGetProperty

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 11:10:03 +00:00
Peter Maydell
dc337c6e26 Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20151215-1' into staging
usb: ehci idt fix, event support for mtp

# gpg: Signature made Tue 15 Dec 2015 09:54:22 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20151215-1:
  ehci: make idt processing more robust
  usb-mtp: add support for basic mtp events
  usb-mtp: Add support for inotify based file monitoring
  usb-mtp: free objects on a mtp reset
  usb-mtp: use a list for keeping track of children

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 10:26:17 +00:00
Peter Maydell
71f3ef0836 Open 2.6 development tree
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 10:17:08 +00:00
Eric Blake
bac5429ccb qapi: Detect base class loops
It should be fairly obvious that qapi base classes need to
form an acyclic graph, since QMP cannot specify the same
key more than once, while base classes are included as flat
members alongside other members added by the child.  But the
old check_member_clash() parser function was not prepared to
check for this, and entered an infinite recursion (at least
until Python gives up, complaining about nesting too deep).

Now that check_member_clash() has been recently removed,
attempts at self-inheritance trigger an assertion failure
introduced by commit ac88219a.  The obvious fix is to turn
the assertion into a conditional.

This patch includes both the tests (base-cycle-direct and
base-cycle-indirect) and the fix, since the .err file output
for the unfixed case is not useful (particularly when it was
warning about unbounded recursion, as that limit may be
platform-specific).

We don't need to worry about cycles in flat unions (neither
the base type nor the type of a variant can be a union) nor
in alternates (alternate branches cannot themselves be an
alternate).  But if we later allow a union type as a variant,
we will still be okay, as QAPISchemaObjectTypeVariants.check()
triggers the same QAPISchemaObjectType.check() that will
detect any loops.

Likewise, we need not worry about the case of diamond
inheritance where the same class is used for a flat union base
class and one of its variants; either both uses will introduce
a collision in trying to insert the same member name twice, or
the shared type is empty and changes nothing.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-16-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:29 +01:00
Eric Blake
01cfbaa4c3 qapi: Move duplicate collision checks to schema check()
With the recent commit 'qapi: Detect collisions in C member
names', we have two different locations for detecting clashes -
one at parse time, and another at QAPISchema*.check() time.
Remove all of the ad hoc parser checks, and delete associated
code (for example, the global check_member_clash() method is
no longer needed).

Testing this showed that the test union-bad-branch wasn't adding
much: union-clash-branches also exposes the error message when
branches collide, and we've recently fixed things to avoid an
implicit collision with max.  Likewise, the error for
enum-clash-member changes to report our new detection of
upper case in a value name, unless we modify the test to use
all lower case.

The wording of several error messages has changed, but the
change is generally an improvement rather than a regression.

No change to generated code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-15-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:29 +01:00
Eric Blake
893e1f2c51 qapi: Enforce (or whitelist) case conventions on qapi members
We document that members of enums and objects should be
'lower-case', although we were not enforcing it.  We have to
whitelist a few pre-existing entities that violate the norms.
Add three new tests to expose the new error message, each of
which first uses the whitelisted name 'UuidInfo' to prove the
whitelist works, then triggers the failure (this is the same
pattern used in the existing returns-whitelist.json test).

Note that by adding this check, we have effectively forbidden
an entity with a case-insensitive clash of member names, for
any entity that is not on the whitelist (although there is
still the possibility to clash via '-' vs. '_').

Not done here: a future patch should also add naming convention
support and whitelist exceptions for command, event, and type
names.

The additions to QAPISchemaMember.check_clash() check whether
info['name'] is in the whitelist (the top-most entity name at
the point 'info' tracks), rather than self.owner (the type,
possibly implicit, that directly owns the member), because it
is easier to maintain the whitelist by the names actually in
the user's .json file, rather than worrying about the names
of implicit types.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-14-git-send-email-eblake@redhat.com>
[Simplified a bit as per discussion with Eric]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:29 +01:00
Eric Blake
93bda4dd46 qapi: Track enum values by QAPISchemaMember, not string
Rather than using just an array of strings, make enum.values be
an array of the new QAPISchemaMember type, and add a helper
member_names() method to get back at the original list of names.
Likewise, creating an enum requires wrapping strings, via a new
QAPISchema._make_enum_members() method.  The benefit of wrapping
enum members in a QAPISchemaMember Python object is that we now
share the existing code for C name clash detection (although the
code is not yet active until a later commit removes the earlier
ad hoc parser checks).

In a related change, the QAPISchemaMember._pretty_owner() method
needs to learn about one more implicit type name: the generated
enum associated with a simple union.

In the interest of keeping the changes of this patch local to one
file, the visitor interface still passes just a list of names
rather than the full list of QAPISchemaMember instances.  We may
want to revisit this in the future, if the consistency with
visit_object_type() is worth it.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-12-git-send-email-eblake@redhat.com>
[Eric's simplifying followup squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:29 +01:00
Eric Blake
d44f9ac80c qapi: Prepare new QAPISchemaMember base class
We want to share some clash detection code between enum values
and object type members.  To assist with that, split off part
of QAPISchemaObjectTypeMember into a new base class
QAPISchemaMember that tracks name, owner, and common clash
detection code; while the former keeps the additional fields
for type and optional flag.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-11-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:29 +01:00
Eric Blake
29637a6ee9 qapi: Shorter visits of optional fields
For less code, reflect the determined boolean value of an optional
visit back to the caller instead of making the caller read the
boolean after the fact.

The resulting generated code has the following diff:

|-    visit_optional(v, &has_fdset_id, "fdset-id");
|-    if (has_fdset_id) {
|+    if (visit_optional(v, &has_fdset_id, "fdset-id")) {
|         visit_type_int(v, &fdset_id, "fdset-id", &err);
|         if (err) {
|             goto out;
|         }
|     }

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-10-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:29 +01:00
Eric Blake
5cdc8831a7 qapi: Simplify visits of optional fields
None of the visitor callbacks would set an error when testing
if an optional field was present; make this part of the interface
contract by eliminating the errp argument.

The resulting generated code has a nice diff:

|-    visit_optional(v, &has_fdset_id, "fdset-id", &err);
|-    if (err) {
|-        goto out;
|-    }
|+    visit_optional(v, &has_fdset_id, "fdset-id");
|     if (has_fdset_id) {
|         visit_type_int(v, &fdset_id, "fdset-id", &err);
|         if (err) {
|             goto out;
|         }
|     }

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-9-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:29 +01:00
Eric Blake
d00341af38 qapi: Fix alternates that accept 'number' but not 'int'
The QMP input visitor allows integral values to be assigned by
promotion to a QTYPE_QFLOAT.  However, when parsing an alternate,
we did not take this into account, such that an alternate that
accepts 'number' and some other type, but not 'int', would reject
integral values.

With this patch, we now have the following desirable table:

    alternate has      case selected for
    'int'  'number'    QTYPE_QINT  QTYPE_QFLOAT
      no        no     error       error
      no       yes     'number'    'number'
     yes        no     'int'       error
     yes       yes     'int'       'number'

While it is unlikely that we will ever use 'number' in an
alternate other than in the testsuite, it never hurts to be
more precise in what we allow.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
9d3f3494c5 qapi: Inline _make_implicit_tag()
Now that alternates no longer use an implicit tag, we can
inline _make_implicit_tag() into its one caller,
_def_union_type().

No change to generated code.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
0b2e84ba77 qapi-types: Drop unnedeed ._fwdefn
Previously, the generated code in qapi-types.c initialized all
enum lookup tables first, prior to any other definitions.  But
there are no topological sorting requirements that mandate this
layout, so we can drop the QAPISchemaGenTypeVisitor._fwdefn
field and just generate all definitions in visitation order.

The generated code shows some churn due to reordering, but it
is still fairly straightforward to follow (all the deletions
occur in one hunk, and all the deleted lines are re-inserted
in the same order later in the same files, just spread across
multiple insertion points).

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
0426d53c65 qapi: Simplify visiting of alternate types
Previously, working with alternates required two lookup arrays
and some indirection: for type Foo, we created Foo_qtypes[]
which maps each qtype to a value of the generated FooKind enum,
then look up that value in FooKind_lookup[] like we do for other
union types.

This has a couple of subtle bugs.  First, the generator was
creating a call with a parameter '(int *) &(*obj)->type' where
type is an enum type; this is unsafe if the compiler chooses
to store the enum type in a different size than int, where
assigning through the wrong size pointer can corrupt data or
cause a SIGBUS.

Related bug, not not fixed in this patch: qapi-visit.py's
gen_visit_enum() generates a cast of its enum * argument to
int *. Marked FIXME.

Second, since the values of the FooKind enum start at zero, all
entries of the Foo_qtypes[] array that were not explicitly
initialized will map to the same branch of the union as the
first member of the alternate, rather than triggering a desired
failure in visit_get_next_type().  Fortunately, the bug seldom
bites; the very next thing the input visitor does is try to
parse the incoming JSON with the wrong parser, which normally
fails; the output visitor is not used with a C struct in that
state, and the dealloc visitor has nothing to clean up (so
there is no leak).

However, the second bug IS observable in one case: parsing an
integer causes unusual behavior in an alternate that contains
at least a 'number' member but no 'int' member, because the
'number' parser accepts QTYPE_QINT in addition to the expected
QTYPE_QFLOAT (that is, since 'int' is not a member, the type
QTYPE_QINT accidentally maps to FooKind 0; if this enum value
is the 'number' branch the integer parses successfully, but if
the 'number' branch is not first, some other branch tries to
parse the integer and rejects it).  A later patch will worry
about fixing alternates to always parse all inputs that a
non-alternate 'number' would accept, for now this is still
marked FIXME in the updated test-qmp-input-visitor.c, to
merely point out that new undesired behavior of 'ans' matches
the existing undesired behavior of 'asn'.

This patch fixes the default-initialization bug by deleting the
indirection, and modifying get_next_type() to directly assign a
QTypeCode parameter.  This in turn fixes the type-casting bug,
as we are no longer casting a pointer to enum to a questionable
size. There is no longer a need to generate an implicit FooKind
enum associated with the alternate type (since the QMP wire
format never uses the stringized counterparts of the C union
member names).  Since the updated visit_get_next_type() does not
know which qtypes are expected, the generated visitor is
modified to generate an error statement if an unexpected type is
encountered.

Callers now have to know the QTYPE_* mapping when looking at the
discriminator; but so far, only the testsuite was even using the
C struct of an alternate types.  I considered the possibility of
keeping the internal enum FooKind, but initialized differently
than most generated arrays, as in:
  typedef enum FooKind {
      FOO_KIND_A = QTYPE_QDICT,
      FOO_KIND_B = QTYPE_QINT,
  } FooKind;
to create nicer aliases for knowing when to use foo->a or foo->b
when inspecting foo->type; but it turned out to add too much
complexity, especially without a client.

There is a user-visible side effect to this change, but I
consider it to be an improvement. Previously,
the invalid QMP command:
  {"execute":"blockdev-add", "arguments":{"options":
    {"driver":"raw", "id":"a", "file":true}}}
failed with:
  {"error": {"class": "GenericError",
    "desc": "Invalid parameter type for 'file', expected: QDict"}}
(visit_get_next_type() succeeded, and the error comes from the
visit_type_BlockdevOptions() expecting {}; there is no mention of
the fact that a string would also work).  Now it fails with:
  {"error": {"class": "GenericError",
    "desc": "Invalid parameter type for 'file', expected: BlockdevRef"}}
(the error when the next type doesn't match any expected types for
the overall alternate).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-5-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
7264f5c50c qapi: Convert QType into QAPI built-in enum type
What's more meta than using qapi to define qapi? :)

Convert QType into a full-fledged[*] builtin qapi enum type, so
that a subsequent patch can then use it as the discriminator
type of qapi alternate types.  Fortunately, the judicious use of
'prefix' in the qapi definition avoids churn to the spelling of
the enum constants.

To avoid circular definitions, we have to flip the order of
inclusion between "qobject.h" vs. "qapi-types.h".  Back in commit
28770e0, we had the latter include the former, so that we could
use 'QObject *' for our implementation of 'any'.  But that usage
also works with only a forward declaration, whereas the
definition of QObject requires QType to be a complete type.

[*] The type has to be builtin, rather than declared in
qapi/common.json, because we want to use it for alternates even
when common.json is not included. But since it is the first
builtin enum type, we have to add special cases to qapi-types
and qapi-visit to only emit definitions once, even when two
qapi files are being compiled into the same binary (the way we
already handled builtin list types like 'intList').  We may
need to revisit how multiple qapi files share common types,
but that's a project for another day.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
1310a3d3bd qobject: Rename qtype_code to QType
The name QType matches our CODING_STYLE conventions for type names
in CamelCase.  It also matches the fact that we are already naming
all the enum members with a prefix of QTYPE, not QTYPE_CODE.  And
doing the rename will also make it easier for the next patch to use
QAPI for providing the enum, which also wants CamelCase type names.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-3-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
55e1819c50 qobject: Simplify QObject
The QObject hierarchy is small enough, and unlikely to grow further
(since we only use it to map to JSON and already cover all JSON
types), that we can simplify things by not tracking a separate
vtable, but just inline the code element of the vtable QType
directly into QObject (renamed to type), and track a separate array
of destroy functions.  We can drop qnull_destroy_obj() in the
process.

The remaining QObject subclasses must export their destructor.

This also has the nice benefit of moving the typename 'QType'
out of the way, so that the next patch can repurpose it for a
nicer name for 'qtype_code'.

The various objects are still the same size (so no change in cache
line pressure), but now have less indirection (although I didn't
bother benchmarking to see if there is a noticeable speedup, as
we don't have hard evidence that this was in a performance hotspot
in the first place).

A future patch could drop the refcnt size to 32 bits for a smaller
struct on 64-bit architectures, if desired (we have limits on the
largest JSON that we are willing to parse, and will probably never
need to take full advantage of a 64-bit refcnt).

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
d20a580bc0 qapi: Change munging of CamelCase enum values
When munging enum values, the fact that we were passing the entire
prefix + value through camel_to_upper() meant that enum values
spelled with CamelCase could be turned into CAMEL_CASE.  However,
this provides a potential collision (both OneTwo and One-Two would
munge into ONE_TWO) for enum types, when the same two names are
valid side-by-side as QAPI member names.  By changing the generation
of enum constants to always be prefix + '_' + c_name(value,
False).upper(), and ensuring that there are no case collisions (in
the next patches), we no longer have to worry about names that
would be distinct as QAPI members but collide as variant tag names,
without having to think about what munging the heuristics in
camel_to_upper() will actually perform on an enum value.

Making the change will affect enums that did not follow coding
conventions, using 'CamelCase' rather than desired 'lower-case'.

Thankfully, there are only two culprits: InputButton and ErrorClass.
We already tweaked ErrorClass to make it an alias of QapiErrorClass,
where only the alias needs changing rather than the whole tree.  So
the bulk of this change is modifying INPUT_BUTTON_WHEEL_UP to the
new INPUT_BUTTON_WHEELUP (and likewise for WHEELDOWN).  That part
of this commit may later need reverting if we rename the enum
constants from 'WheelUp' to 'wheel-up' as part of moving
x-input-send-event to a stable interface; but at least we have
documentation bread crumbs in place to remind us (commit 513e7cd),
and it matches the fact that SDL constants are also spelled
SDL_BUTTON_WHEELUP.

Suggested by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-27-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
f22a28b898 qapi: Add alias for ErrorClass
The qapi enum ErrorClass is unusual that it uses 'CamelCase' names,
contrary to our documented convention of preferring 'lower-case'.
However, this enum is entrenched in the API; we cannot change
what strings QMP outputs.  Meanwhile, we want to simplify how
c_enum_const() is used to generate enum constants, by moving away
from the heuristics of camel_to_upper() to a more straightforward
c_name(N).upper() - but doing so will rename all of the ErrorClass
constants and cause churn to all client files, where the new names
are aesthetically less pleasing (ERROR_CLASS_DEVICENOTFOUND looks
like we can't make up our minds on whether to break between words).

So as always in computer science, solve the problem by some more
indirection: rename the qapi type to QapiErrorClass, and add a
new enum ErrorClass in error.h whose members are aliases of the
qapi type, but with the spelling expected elsewhere in the tree.
Then, when c_enum_const() changes the munging, we only have to
adjust the one alias spot.

Suggested by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-26-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
86f4b6871c cpu: Convert CpuInfo into flat union
The CpuInfo struct is used only by the 'query-cpus' output
command, so we are free to modify it by adding fields (clients
are already supposed to ignore unknown output fields), or by
changing optional members to mandatory, while still keeping
QMP wire compatibility with older versions of qemu.

When qapi type CpuInfo was originally created for 0.14, we had
no notion of a flat union, and instead just listed a bunch of
optional fields with documentation about the mutually-exclusive
choice of which instruction pointer field(s) would be provided
for a given architecture.  But now that we have flat unions and
introspection, it is better to segregate off which fields will
be provided according to the actual architecture.  With this in
place, we no longer need the fields to be optional, because the
choice of the new 'arch' discriminator serves that role.

This has an additional benefit: the old all-in-one struct was
the only place in the code base that had a case-sensitive
naming of members 'pc' vs. 'PC'.  Separating these spellings
into different branches of the flat union will allow us to add
restrictions against future case-insensitive collisions, since
that is generally a poor interface practice.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-25-git-send-email-eblake@redhat.com>
[Spelling of CPUInfo{SPARC,PPC,MIPS} fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
04e0639d4e qapi: Remove obsolete tests for MAX collision
Now that we no longer collide with an implicit _MAX enum member,
we no longer need to reject it in the ad hoc parser, and can
remove several tests that are no longer needed.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-24-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
7fb1cf1606 qapi: Don't let implicit enum MAX member collide
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes.  Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.

This patch was mostly generated by applying a temporary patch:

|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
|     max_index = c_enum_const(name, 'MAX', prefix)
|     ret += mcgen('''
|     [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
|                max_index=max_index)

then running:

$ cat qapi-{types,event}.c tests/test-qapi-types.c |
    sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list

The only things not generated are the changes in scripts/qapi.py.

Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:28 +01:00
Eric Blake
59a92feedc qapi: Tighten the regex on valid names
We already documented that qapi names should match specific
patterns (such as starting with a letter unless it was an enum
value or a downstream extension).  Tighten that from a suggestion
into a hard requirement, which frees up names beginning with a
single underscore for qapi internal usage.

The tighter regex doesn't forbid everything insane that a user
could provide (for example, a user could name a type 'Foo-lookup'
to collide with the generated 'Foo_lookup[]' for an enum 'Foo'),
but does a good job at protecting the most obvious uses, and
also happens to reserve single leading underscore for later use.

The handling of enum values starting with a digit is tricky:
commit 9fb081e introduced a subtle bug by using c_name() on
a munged value, which would allow an enum to include the
member 'q-int' in spite of our reservation.  Furthermore,
munging with a leading '_' would fail our tighter regex.  So
fix it by only munging for leading digits (which are never
ticklish in c_name()) and by using a different prefix (I
picked 'D', although any letter should do).

Add new tests, reserved-member-underscore and reserved-enum-q,
to demonstrate the tighter checking.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-22-git-send-email-eblake@redhat.com>
Message-Id: <1447883135-18020-1-git-send-email-eblake@redhat.com>
[Eric's fixup squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:27 +01:00
Eric Blake
5be5b7764f blkdebug: Avoid '.' in enum values
Our qapi conventions document that '.' should only be used in
the prefix of downstream names.  BlkdebugEvent was a lone
exception to this.  Changing this is not backwards compatible
to the 'blockdev-add' QMP command; however, that command is
not yet fully stable.  It can also be argued that the testsuite
is the biggest user of blkdebug, and that any other user can
be taught to deal with the change by paying attention to
introspection results.

Done with:

$ for str in \
     l1_grow.{alloc,write,activate}_table \
     l2_alloc.{cow_read,write} \
     refblock_alloc.{hookup,write,write_blocks,write_table,switch_table} \
     pwritev_rmw.{head,after_head,tail,after_tail}; do
   str1=$(echo "$str" | sed 's/\./\\./')
   str2=$(echo "$str" | sed 's/\./_/')
   git grep -l "$str1" | xargs -r sed -i "s/$str1/$str2/g"
 done

followed by a manual touchup to test 77 to keep the test working.

Reported-by: Markus Armbruster <armbru@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-21-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:27 +01:00
Eric Blake
a31939e6c8 blkdebug: Merge hand-rolled and qapi BlkdebugEvent enum
No need to keep two separate enums, where editing one is likely
to forget the other.  Now that we can specify a qapi enum prefix,
we don't even have to change the bulk of the uses.

get_event_by_name() could perhaps be replaced by qapi_enum_parse(),
but I left that for another day.

CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:27 +01:00
Eric Blake
7549457200 qapi: Remove dead visitor code
Commit cbc95538 removed unused start_handle() and end_handle(),
but forgot to remove their declarations.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:27 +01:00
Eric Blake
c43567c120 qapi: Fix c_name() munging
The method c_name() is supposed to do two different actions: munge
'-' into '_', and add a 'q_' prefix to ticklish names.  But it did
these steps out of order, making it possible to submit input that
is not ticklish until after munging, where the output then lacked
the desired prefix.

The failure is exposed easily if you have a compiler that recognizes
C11 keywords, and try to name a member '_Thread-local', as it would
result in trying to compile the declaration 'uint64_t _Thread_local;'
which is not valid.  However, this name violates our conventions
(ultimately, want to enforce that no qapi names start with single
underscore), so the test is slightly weaker by instead testing
'wchar-t'; the declaration 'uint64_t wchar_t;' is valid in C (where
wchar_t is only a typedef) but would fail with a C++ compiler (where
it is a keyword).

Fix things by reversing the order of actions within c_name().

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-18-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:27 +01:00
Eric Blake
27b60ab93b qapi: Detect collisions in C member names
Detect attempts to declare two object members that would result
in the same C member name, by keying the 'seen' dictionary off
of the C name rather than the qapi name.  It also requires passing
info through the check_clash() methods.

This addresses a TODO and fixes the previously-broken
args-name-clash test.  The resulting error message demonstrates
the utility of the .describe() method added previously.  No change
to generated code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-17-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:27 +01:00
Eric Blake
88d4ef8b5c qapi: Track owner of each object member
Future commits will migrate semantic checking away from parsing
and over to the various QAPISchema*.check() methods.  But to
report an error message about an incorrect semantic use of a
member of an object type, it helps to know which type, command,
or event owns the member.  In particular, when a member is
inherited from a base type, it is desirable to associate the
member name with the base type (and not the type calling
member.check()).

Rather than packing additional information into the seen array
passed to each member.check() (as in seen[m.name] = {'member':m,
'owner':type}), it is easier to have each member track the name
of the owner type in the first place (keeping things simpler
with the existing seen[m.name] = m).  The new member.owner field
is set via a new set_owner() method, called when registering
the members and variants arrays with an object or variant type.
Track only a name, and not the actual type object, to avoid
creating a circular python reference chain.

Note that Variants.set_owner() method does not set the owner
for the tag_member field; this field is set earlier either as
part of an object's non-variant members, or explicitly by
alternates.

The source information is intended for human consumption in
error messages, and a new describe() method is added to access
the resulting information.  For example, given the qapi:
  { 'command': 'foo', 'data': { 'string': 'str' } }
an implementation of visit_command() that calls
  arg_type.members[0].describe()
will see "'string' (parameter of foo)".

To make the human-readable name of implicit types work without
duplicating efforts, the describe() method has to reverse the
name of implicit types, via the helper _pretty_owner().

No change to generated code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-16-git-send-email-eblake@redhat.com>
[Incorrect & unused -wrapper case in _pretty_owner() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:27 +01:00
Eric Blake
61a946611b qapi: Remove outdated tests related to QMP/branch collisions
Now that branches are in a separate C namespace, we can remove
the restrictions in the parser that claim a branch name would
collide with QMP, and delete the negative tests that are no
longer problematic.  A separate patch can then add positive
tests to qapi-schema-test to test that any corner cases will
compile correctly.

This reverts the scripts/qapi.py portion of commit 7b2a5c2,
now that the assertions that it plugged are no longer possible.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-15-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:27 +01:00
Eric Blake
10565ca92a qapi: Hoist tag collision check to Variants.check()
Checking that a given QAPISchemaObjectTypeVariant.name is a
member of the corresponding QAPISchemaEnumType of the owning
QAPISchemaObjectTypeVariants.tag_member ensures that there are
no collisions in the generated C union for those tag values
(since the enum itself should have no collisions).

However, ever since its introduction in f51d8c3d, this was the
only additional action of of Variant.check(), beyond calling
the superclass Member.check().  This forces a difference in
.check() signatures, just to pass the enum type down.

Simplify things by instead doing the tag name check as part of
Variants.check(), at which point we can rely on inheritance
instead of overriding Variant.check().

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-14-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:27 +01:00
Eric Blake
c2183d2e62 qapi: Factor out QAPISchemaObjectType.check_clash()
Consolidate two common sequences of clash detection into a
new QAPISchemaObjectType.check_clash() helper method.

No change to generated code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:26 +01:00
Eric Blake
b807a1e1e3 qapi: Check for QAPI collisions involving variant members
Right now, our ad hoc parser ensures that we cannot have a
flat union that introduces any members that would clash with
non-variant members inherited from the union's base type (see
flat-union-clash-member.json).  We want QAPISchemaObjectType.check()
to make the same check, so we can later reduce some of the ad
hoc checks.

We already have a map 'seen' of all non-variant members. We
still need to check for collisions between each variant type's
members and the non-variant ones.

To know the variant type's members, we need to call
variant.type.check().  This also detects when a type contains
itself in a variant, exactly like the existing base.check()
detects when a type contains itself as a base.  (Except that
we currently forbid anything but a struct as the type of a
variant, so we can't actually trigger this type of loop yet.)

Slight complication: an alternate's variant can have arbitrary
type, but only an object type's check() may be called outside
QAPISchema.check(). We could either skip the call for variants
of alternates, or skip it for non-object types.  For now, do
the latter, because it's easier.

Then we call each variant member's check_clash() with the
appropriate 'seen' map.  Since members of different variants
can't clash, we have to clone a fresh seen for each variant.
Wrap this in a new helper method
QAPISchemaObjectTypeVariants.check_clash().

Note that cloning 'seen' inside .check_clash() resembles
the one we just removed from .check() in 'qapi: Drop
obsolete tag value collision assertions'; the difference here is
that we are now checking for clashes among the qapi members of
the variant type, rather than for a single clash with the variant
tag name itself.

Note that, by construction, collisions can't actually happen for
simple unions: each variant's type is a wrapper with a single
member 'data', which will never collide with the only non-variant
member 'type'.

For alternates, there's nothing for a variant object type's
members to clash with, and therefore no need to call the new
variants.check_clash().

No change to generated code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-12-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:26 +01:00
Markus Armbruster
14ff84619c qapi: Simplify QAPISchemaObjectTypeVariants.check()
Reduce the ugly flat union / simple union conditional by doing just
the essential work here, namely setting self.tag_member.
Move the rest to callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-7-git-send-email-armbru@redhat.com>
[rebase to earlier changes that moved tag_member.check() of
alternate types, and tweak commit title and wording]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-11-git-send-email-eblake@redhat.com>
2015-12-17 08:21:26 +01:00
Markus Armbruster
577de12d22 qapi: Factor out QAPISchemaObjectTypeMember.check_clash()
While there, stick in a TODO change key of seen from QAPI name to C
name.  Can't do it right away, because it would fail the assertion for
tests/qapi-schema/args-has-clash.json.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-6-git-send-email-armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-10-git-send-email-eblake@redhat.com>
2015-12-17 08:21:26 +01:00
Markus Armbruster
23a4b2c6f1 qapi: Eliminate QAPISchemaObjectType.check() variable members
We can use seen.values() instead if we make it an OrderedDict.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-5-git-send-email-armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-9-git-send-email-eblake@redhat.com>
2015-12-17 08:21:26 +01:00
Markus Armbruster
08683353fc qapi: Fix up commit 7618b91's clash sanity checking change
This hunk

    @@ -964,6 +965,7 @@ class QAPISchemaObjectType(QAPISchemaType):
                 members = []
             seen = {}
             for m in members:
    +            assert c_name(m.name) not in seen
                 seen[m.name] = m
             for m in self.local_members:
                 m.check(schema, members, seen)

is plainly broken.

Asserting the members inherited from base don't clash is somewhat
redundant, because self.base.check() just checked that.  But it
doesn't hurt.

The idea to use c_name(m.name) instead of m.name for collision
checking is sound, because we need to catch clashes between the m.name
and between the c_name(m.name), and when two m.name clash, then their
c_name() also clash.

However, using c_name(m.name) instead of m.name in one of several
places doesn't work.  See the very next line.

Keep the assertion, but drop the c_name() for now.  A future commit
will bring it back.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-4-git-send-email-armbru@redhat.com>
[change TABs in commit message to space]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-8-git-send-email-eblake@redhat.com>
2015-12-17 08:21:26 +01:00
Markus Armbruster
cdc5fa37ed qapi: Clean up after previous commit
QAPISchemaObjectTypeVariants.check() parameter members and
QAPISchemaObjectTypeVariant.check() parameter seen are no longer used,
drop them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-3-git-send-email-armbru@redhat.com>
[rebase to earlier changes that moved tag_member.check() of
alternate types]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-7-git-send-email-eblake@redhat.com>
2015-12-17 08:21:26 +01:00
Markus Armbruster
e564e2dd59 qapi: Simplify QAPISchemaObjectTypeMember.check()
QAPISchemaObjectTypeMember.check() currently does four things:

1. Compute self.type

2. Accumulate members in all_members

   Only one caller cares: QAPISchemaObjectType.check() uses it to
   compute self.members.  The other callers pass a throw-away
   accumulator.

3. Accumulate a map from names to members in seen

   Only one caller cares: QAPISchemaObjectType.check() uses it to
   compute its local variable seen, for self.variants.check(), which
   uses it to compute self.variants.tag_member from
   self.variants.tag_name.  The other callers pass a throw-away
   accumulator.

4. Check for collisions

   This piggybacks on 3: before adding a new entry, we assert it's new.

   Only one caller cares: QAPISchemaObjectType.check() uses it to
   assert non-variant members don't clash.

Simplify QAPISchemaObjectType.check(): move 2.-4. to
QAPISchemaObjectType.check(), and drop parameters all_members and
seen.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-2-git-send-email-armbru@redhat.com>
[rebase to earlier changes that moved tag_member.check() of
alternate types, commit message typo fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-6-git-send-email-eblake@redhat.com>
2015-12-17 08:21:26 +01:00
Markus Armbruster
fff5f231d5 qapi: Drop obsolete tag value collision assertions
Union tag values can't clash with member names in generated C anymore
since commit e4ba22b, but QAPISchemaObjectTypeVariants.check() still
asserts they don't.  Drop it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-1-git-send-email-armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-5-git-send-email-eblake@redhat.com>
2015-12-17 08:21:26 +01:00
Eric Blake
7d9586f900 qapi-types: Simplify gen_struct_field[s]
Simplify gen_struct_fields() back to a single iteration over a
list of fields (like it was prior to commit f87ab7f9), by moving
the generated comments to gen_object().  Then, inline
gen_struct_field() into its only caller.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:26 +01:00
Eric Blake
570cd8d119 qapi-types: Consolidate gen_struct() and gen_union()
These two methods are now close enough that we can finally merge
them, relying on the fact that simple unions now provide a
reasonable local_members.  Change gen_struct() to gen_object()
that handles all forms of QAPISchemaObjectType, and rename and
shrink gen_union() to gen_variants() to handle the portion of
gen_object() needed when variants are present.

gen_struct_fields() now has a single caller, so it no longer
needs an optional parameter; however, I did not choose to inline
it into the caller.

No difference to generated code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-3-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:26 +01:00
Eric Blake
da34a9bd99 qapi: Track simple union tag in object.local_members
We were previously creating all unions with an empty list for
local_members.  However, it will make it easier to unify struct
and union generation if we include the generated tag member in
local_members.  That way, we can have a common code pattern:
visit the base (if any), visit the local members (if any), visit
the variants (if any).  The local_members of a flat union
remains empty (because the discriminator is already visited as
part of the base).  Then, by visiting tag_member.check() during
AlternateType.check(), we no longer need to call it during
Variants.check().

The various front end entities now exist as follows:
struct: optional base, optional local_members, no variants
simple union: no base, one-element local_members, variants with tag_member
  from local_members
flat union: base, no local_members, variants with tag_member from base
alternate: no base, no local_members, variants

With the new local members, we require a bit of finesse to
avoid assertions in the clients.

No change to generated code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17 08:21:26 +01:00
Gabriel L. Somlo
6c8d56a2e9 fw_cfg: replace ioport data read with generic method
IOPort read access is limited to one byte at a time by
fw_cfg_comb_valid(). As such, fw_cfg_comb_read() may safely
ignore its size argument (which will always be 1), and simply
call its fw_cfg_read() helper function once, returning 8 bits
via the least significant byte of a 64-bit return value.

This patch replaces fw_cfg_comb_read() with the generic method
fw_cfg_data_read(), and removes the unused fw_cfg_read() helper.

When called with size = 1, fw_cfg_data_read() acts exactly like
fw_cfg_read(), performing the same set of sanity checks, and
executing the while loop at most once (subject to the current
read offset being within range).

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-id: 1446733972-1602-7-git-send-email-somlo@cmu.edu
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:46:13 +01:00
Gabriel L. Somlo
38bf20931a fw_cfg: add generic non-DMA read method
Introduce fw_cfg_data_read(), a generic read method which works
on all access widths (1 through 8 bytes, inclusive), and can be
used during both IOPort and MMIO read accesses.

To maintain legibility, only fw_cfg_data_mem_read() (the MMIO
data read method) is replaced by this patch. The new method
essentially unwinds the fw_cfg_data_mem_read() + fw_cfg_read()
combo, but without unnecessarily repeating all the validity
checks performed by the latter on each byte being read.

This patch also modifies the trace_fw_cfg_read prototype to
accept a 64-bit value argument, allowing it to work properly
with the new read method, but also remain backward compatible
with existing call sites.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-6-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:45:59 +01:00
Gabriel L. Somlo
66f8fd9dda fw_cfg: avoid calculating invalid current entry pointer
When calculating a pointer to the currently selected fw_cfg item, the
following is used:

  FWCfgEntry *e = &s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];

When s->cur_entry is FW_CFG_INVALID, we are calculating the address of
a non-existent element in s->entries[arch][...], which is undefined.

This patch ensures the resulting entry pointer is set to NULL whenever
s->cur_entry is FW_CFG_INVALID.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-id: 1446733972-1602-5-git-send-email-somlo@cmu.edu
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:45:59 +01:00
Gabriel L. Somlo
3f8752b4e5 fw_cfg: remove offset argument from callback prototype
Read callbacks are now only invoked at item selection, before any
data is read. As such, the value of the offset argument passed to
the callback will always be 0. Also, the two callback instances
currently in use both leave their offset argument unused.

This patch removes the offset argument from the fw_cfg read callback
prototype, and from the currently available instances. The unused
(write) callback prototype is also removed (write support was removed
earlier, in commit 023e3148).

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-4-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:45:59 +01:00
Gabriel L. Somlo
3bef7e8aab fw_cfg: amend callback behavior spec to once per select
Currently, the fw_cfg internal API specifies that if an item was set up
with a read callback, the callback must be run each time a byte is read
from the item. This behavior is both wasteful (most items do not have a
read callback set), and impractical for bulk transfers (e.g., DMA read).

At the time of this writing, the only items configured with a callback
are "/etc/table-loader", "/etc/acpi/tables", and "/etc/acpi/rsdp". They
all share the same callback functions: virt_acpi_build_update() on ARM
(in hw/arm/virt-acpi-build.c), and acpi_build_update() on i386 (in
hw/i386/acpi.c). Both of these callbacks are one-shot (i.e. they return
without doing anything at all after the first time they are invoked with
a given build_state; since build_state is also shared across all three
items mentioned above, the callback only ever runs *once*, the first
time either of the listed items is read).

This patch amends the specification for fw_cfg_add_file_callback() to
state that any available read callback will only be invoked once each
time the item is selected. This change has no practical effect on the
current behavior of QEMU, and it enables us to significantly optimize
the behavior of fw_cfg reads during guest firmware setup, eliminating
a large amount of redundant callback checks and invocations.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-3-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:45:59 +01:00
Gabriel L. Somlo
9c4a5c55f5 fw_cfg: move internal function call docs to header file
Move documentation for fw_cfg functions internal to qemufrom
docs/specs/fw_cfg.txt to the fw_cfg.h header file, next to
their prototype declarations, formatted as doc-comments.

NOTE: Documentation for fw_cfg_add_callback() is completely
dropped by this patch, as that function has been eliminated
by commit 023e3148.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-2-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:45:59 +01:00
Peter Maydell
2f79a18fdd audio/coreaudio.c: Avoid deprecated AudioDeviceAdd/RemoveIOProc APIs
The AudioDeviceAddIOProc() and AudioDeviceRemoveIOProc() functions were
deprecated in OSX 10.5. Since we don't support any earlier versions of
OSX, we can simply replace them with the new APIs
AudioDeviceCreateIOProcID() and AudioDeviceRemoveIOProcID().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-6-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:08:12 +01:00
Peter Maydell
2d99f6299b audio/coreaudio.c: Use new-in-OSX-10.6 APIs when available
Use the new-in-OSX 10.6 API AudioObjectGetPropertyData() instead
of the deprecated AudioDeviceGetProperty() and AudioDeviceSetProperty()
functions when possible.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:08:12 +01:00
Peter Maydell
95a860f62e audio/coreaudio.c: Factor out uses of AudioDeviceGet/SetProperty
The CoreAudio APIs AudioDeviceGetProperty and AudioDeviceSetProperty are
deprecated from OSX 10.6, so factor out our calls to them so we can
provide versions which use the replacement APIs on OSX newer than 10.5.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:08:11 +01:00
Peter Maydell
624d1fc30f audio/coreaudio.c: Use new-in-OSX-10.6 API for getting default voice
If we're building for OSX 10.6 or better, use the new API
AudioObjectGetPropertyData for getting the default voice.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:08:11 +01:00
Peter Maydell
88a0f8300b audio/coreaudio.c: Factor out use of AudioHardwareGetProperty
The CoreAudio function AudioHardwareGetProperty has been deprecated
starting with OSX 10.6, so factor out our call to it so we can
provide an equivalent with the new APIs when they exist.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 11:08:11 +01:00
Gerd Hoffmann
156a2e4dbf ehci: make idt processing more robust
Make ehci_process_itd return an error in case we didn't do any actual
iso transfer because we've found no active transaction.  That'll avoid
ehci happily run in circles forever if the guest builds a loop out of
idts.

This is CVE-2015-8558.

Cc: qemu-stable@nongnu.org
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Tested-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 09:49:03 +01:00
Bandan Das
93d592e3d1 usb-mtp: add support for basic mtp events
When the host polls for events, we check our
events qlist and send one event at a time. Also, note
that the event packet needs to be sent in one go, so
I increased the max packet size to 64.

Tested with a linux guest.

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-5-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 09:26:10 +01:00
Bandan Das
8e3e3897ce usb-mtp: Add support for inotify based file monitoring
For now, we use inotify watches to track only a small number of
events, namely, add, delete and modify. Note that for delete, the kernel
already deactivates the watch for us and we just need to
take care of modifying our internal state.

inotify is a linux only mechanism.

Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-4-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 09:26:10 +01:00
Bandan Das
b3c4d4250f usb-mtp: free objects on a mtp reset
On a reset, call usb_mtp_object_free on all objects and their children

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-3-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 09:25:27 +01:00
Bandan Das
4c7a67f5cd usb-mtp: use a list for keeping track of children
To support adding/removal of objects, we will need to update
the object cache hierarchy we have built internally. Convert
to using a Qlist for easier management.

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-2-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15 09:25:27 +01:00
Stefano Stabellini
fc3e493bc8 xen_disk: treat "vhd" as "vpc"
The Xen toolstack uses "vhd" to specify a disk in VHD format, however
the name of the driver in QEMU is "vpc". Replace "vhd" with "vpc", so
that QEMU can find the right driver to use for it.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-12-11 17:02:37 +00:00
Jan Beulich
55c8672c2e xen/pass-through: correctly deal with RW1C bits
Introduce yet another mask for them, so that the generic routine can
handle them, at once rendering xen_pt_pmcsr_reg_write() superfluous.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-12-09 15:47:28 +00:00
Jan Beulich
bdfe5159cb xen/MSI-X: really enforce alignment
The way the generic infrastructure works the intention of not allowing
unaligned accesses can't be achieved by simply setting .unaligned to
false. The benefit is that we can now replace the conditionals in
{get,set}_entry_value() by assert()-s.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-12-09 15:46:57 +00:00
Jan Beulich
f0ada3608a xen/MSI-X: latch MSI-X table writes
The remaining log message in pci_msix_write() is wrong, as there guest
behavior may only appear to be wrong: For one, the old logic didn't
take the mask-all bit into account. And then this shouldn't depend on
host device state (i.e. the host may have masked the entry without the
guest having done so). Plus these writes shouldn't be dropped even when
an entry gets unmasked. Instead, if they can't be made take effect
right away, they should take effect on the next unmasking or enabling
operation - the specification explicitly describes such caching
behavior.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-12-09 15:45:29 +00:00
726 changed files with 44752 additions and 27468 deletions

View File

@@ -941,6 +941,13 @@ M: Jiri Pirko <jiri@resnulli.us>
S: Maintained
F: hw/net/rocker/
NVDIMM
M: Xiao Guangrong <guangrong.xiao@linux.intel.com>
S: Maintained
F: hw/acpi/nvdimm.c
F: hw/mem/nvdimm.c
F: include/hw/mem/nvdimm.h
Subsystems
----------
Audio
@@ -1029,7 +1036,8 @@ Device Tree
M: Peter Crosthwaite <crosthwaite.peter@gmail.com>
M: Alexander Graf <agraf@suse.de>
S: Maintained
F: device_tree.[ch]
F: device_tree.c
F: include/sysemu/device_tree.h
Error reporting
M: Markus Armbruster <armbru@redhat.com>
@@ -1108,8 +1116,9 @@ F: net/netmap.c
Network Block Device (NBD)
M: Paolo Bonzini <pbonzini@redhat.com>
S: Odd Fixes
F: block/nbd.c
F: nbd.*
F: block/nbd*
F: nbd/
F: include/block/nbd*
F: qemu-nbd.c
T: git git://github.com/bonzini/qemu.git nbd-next
@@ -1192,6 +1201,7 @@ SLIRP
M: Jan Kiszka <jan.kiszka@siemens.com>
S: Maintained
F: slirp/
F: net/slirp.c
T: git git://git.kiszka.org/qemu.git queues/slirp
Tracing
@@ -1243,6 +1253,13 @@ S: Odd fixes
F: util/buffer.c
F: include/qemu/buffer.h
I/O Channels
M: Daniel P. Berrange <berrange@redhat.com>
S: Maintained
F: io/
F: include/io/
F: tests/test-io-*
Usermode Emulation
------------------
Overall
@@ -1483,6 +1500,7 @@ M: Denis V. Lunev <den@openvz.org>
L: qemu-block@nongnu.org
S: Supported
F: block/parallels.c
F: docs/specs/parallels.txt
qed
M: Stefan Hajnoczi <stefanha@redhat.com>

View File

@@ -159,6 +159,7 @@ dummy := $(call unnest-vars,, \
crypto-obj-y \
crypto-aes-obj-y \
qom-obj-y \
io-obj-y \
common-obj-y \
common-obj-m)
@@ -178,6 +179,7 @@ SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES))
$(SOFTMMU_SUBDIR_RULES): $(block-obj-y)
$(SOFTMMU_SUBDIR_RULES): $(crypto-obj-y)
$(SOFTMMU_SUBDIR_RULES): $(io-obj-y)
$(SOFTMMU_SUBDIR_RULES): config-all-devices.mak
subdir-%:
@@ -238,7 +240,7 @@ qemu-io$(EXESUF): qemu-io.o $(block-obj-y) $(crypto-obj-y) $(qom-obj-y) libqemuu
qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o
fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/virtio-9p-marshal.o libqemuutil.a libqemustub.a
fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/9p-marshal.o fsdev/9p-iov-marshal.o libqemuutil.a libqemustub.a
fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap
qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
@@ -269,7 +271,8 @@ $(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
qapi-modules = $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/qapi/common.json \
$(SRC_PATH)/qapi/block.json $(SRC_PATH)/qapi/block-core.json \
$(SRC_PATH)/qapi/event.json $(SRC_PATH)/qapi/introspect.json
$(SRC_PATH)/qapi/event.json $(SRC_PATH)/qapi/introspect.json \
$(SRC_PATH)/qapi/crypto.json
qapi-types.c qapi-types.h :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)

View File

@@ -8,7 +8,8 @@ util-obj-y += qmp-introspect.o qapi-types.o qapi-visit.o qapi-event.o
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y = async.o thread-pool.o
block-obj-y += nbd.o block.o blockjob.o
block-obj-y += nbd/
block-obj-y += block.o blockjob.o
block-obj-y += main-loop.o iohandler.o qemu-timer.o
block-obj-$(CONFIG_POSIX) += aio-posix.o
block-obj-$(CONFIG_WIN32) += aio-win32.o
@@ -28,6 +29,11 @@ crypto-aes-obj-y = crypto/
qom-obj-y = qom/
#######################################################################
# io-obj-y is code used by both qemu system emulation and qemu-img
io-obj-y = io/
######################################################################
# Target independent part of system emulation. The long term path is to
# suppress *all* target specific code in case of system emulation, i.e. a

View File

@@ -176,6 +176,7 @@ dummy := $(call unnest-vars,.., \
crypto-obj-y \
crypto-aes-obj-y \
qom-obj-y \
io-obj-y \
common-obj-y \
common-obj-m)
target-obj-y := $(target-obj-y-save)
@@ -185,6 +186,7 @@ all-obj-y += $(qom-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y)
all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
$(QEMU_PROG_BUILD): config-devices.mak

View File

@@ -1 +1 @@
2.5.0
2.5.50

View File

@@ -258,9 +258,7 @@ void do_acpitable_option(const QemuOpts *opts)
acpi_table_add(opts, &err);
if (err) {
error_report("Wrong acpi table provided: %s",
error_get_pretty(err));
error_free(err);
error_reportf_err(err, "Wrong acpi table provided: ");
exit(1);
}
#endif

View File

@@ -1806,9 +1806,6 @@ static void audio_init (void)
atexit (audio_atexit);
s->ts = timer_new_ns(QEMU_CLOCK_VIRTUAL, audio_timer, s);
if (!s->ts) {
hw_error("Could not create audio timer\n");
}
audio_process_options ("AUDIO", audio_options);
@@ -1859,12 +1856,8 @@ static void audio_init (void)
if (!done) {
done = !audio_driver_init (s, &no_audio_driver);
if (!done) {
hw_error("Could not initialize audio subsystem\n");
}
else {
dolog ("warning: Using timer based audio emulation\n");
}
assert(done);
dolog("warning: Using timer based audio emulation\n");
}
if (conf.period.hertz <= 0) {

View File

@@ -32,6 +32,10 @@
#define AUDIO_CAP "coreaudio"
#include "audio_int.h"
#ifndef MAC_OS_X_VERSION_10_6
#define MAC_OS_X_VERSION_10_6 1060
#endif
static int isAtexit;
typedef struct {
@@ -45,11 +49,233 @@ typedef struct coreaudioVoiceOut {
AudioDeviceID outputDeviceID;
UInt32 audioDevicePropertyBufferFrameSize;
AudioStreamBasicDescription outputStreamBasicDescription;
AudioDeviceIOProcID ioprocid;
int live;
int decr;
int rpos;
} coreaudioVoiceOut;
#if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_6
/* The APIs used here only become available from 10.6 */
static OSStatus coreaudio_get_voice(AudioDeviceID *id)
{
UInt32 size = sizeof(*id);
AudioObjectPropertyAddress addr = {
kAudioHardwarePropertyDefaultOutputDevice,
kAudioObjectPropertyScopeGlobal,
kAudioObjectPropertyElementMaster
};
return AudioObjectGetPropertyData(kAudioObjectSystemObject,
&addr,
0,
NULL,
&size,
id);
}
static OSStatus coreaudio_get_framesizerange(AudioDeviceID id,
AudioValueRange *framerange)
{
UInt32 size = sizeof(*framerange);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyBufferFrameSizeRange,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectGetPropertyData(id,
&addr,
0,
NULL,
&size,
framerange);
}
static OSStatus coreaudio_get_framesize(AudioDeviceID id, UInt32 *framesize)
{
UInt32 size = sizeof(*framesize);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyBufferFrameSize,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectGetPropertyData(id,
&addr,
0,
NULL,
&size,
framesize);
}
static OSStatus coreaudio_set_framesize(AudioDeviceID id, UInt32 *framesize)
{
UInt32 size = sizeof(*framesize);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyBufferFrameSize,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectSetPropertyData(id,
&addr,
0,
NULL,
size,
framesize);
}
static OSStatus coreaudio_get_streamformat(AudioDeviceID id,
AudioStreamBasicDescription *d)
{
UInt32 size = sizeof(*d);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyStreamFormat,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectGetPropertyData(id,
&addr,
0,
NULL,
&size,
d);
}
static OSStatus coreaudio_set_streamformat(AudioDeviceID id,
AudioStreamBasicDescription *d)
{
UInt32 size = sizeof(*d);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyStreamFormat,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectSetPropertyData(id,
&addr,
0,
NULL,
size,
d);
}
static OSStatus coreaudio_get_isrunning(AudioDeviceID id, UInt32 *result)
{
UInt32 size = sizeof(*result);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyDeviceIsRunning,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectGetPropertyData(id,
&addr,
0,
NULL,
&size,
result);
}
#else
/* Legacy versions of functions using deprecated APIs */
static OSStatus coreaudio_get_voice(AudioDeviceID *id)
{
UInt32 size = sizeof(*id);
return AudioHardwareGetProperty(
kAudioHardwarePropertyDefaultOutputDevice,
&size,
id);
}
static OSStatus coreaudio_get_framesizerange(AudioDeviceID id,
AudioValueRange *framerange)
{
UInt32 size = sizeof(*framerange);
return AudioDeviceGetProperty(
id,
0,
0,
kAudioDevicePropertyBufferFrameSizeRange,
&size,
framerange);
}
static OSStatus coreaudio_get_framesize(AudioDeviceID id, UInt32 *framesize)
{
UInt32 size = sizeof(*framesize);
return AudioDeviceGetProperty(
id,
0,
false,
kAudioDevicePropertyBufferFrameSize,
&size,
framesize);
}
static OSStatus coreaudio_set_framesize(AudioDeviceID id, UInt32 *framesize)
{
UInt32 size = sizeof(*framesize);
return AudioDeviceSetProperty(
id,
NULL,
0,
false,
kAudioDevicePropertyBufferFrameSize,
size,
framesize);
}
static OSStatus coreaudio_get_streamformat(AudioDeviceID id,
AudioStreamBasicDescription *d)
{
UInt32 size = sizeof(*d);
return AudioDeviceGetProperty(
id,
0,
false,
kAudioDevicePropertyStreamFormat,
&size,
d);
}
static OSStatus coreaudio_set_streamformat(AudioDeviceID id,
AudioStreamBasicDescription *d)
{
UInt32 size = sizeof(*d);
return AudioDeviceSetProperty(
id,
0,
0,
0,
kAudioDevicePropertyStreamFormat,
size,
d);
}
static OSStatus coreaudio_get_isrunning(AudioDeviceID id, UInt32 *result)
{
UInt32 size = sizeof(*result);
return AudioDeviceGetProperty(
id,
0,
0,
kAudioDevicePropertyDeviceIsRunning,
&size,
result);
}
#endif
static void coreaudio_logstatus (OSStatus status)
{
const char *str = "BUG";
@@ -144,10 +370,7 @@ static inline UInt32 isPlaying (AudioDeviceID outputDeviceID)
{
OSStatus status;
UInt32 result = 0;
UInt32 propertySize = sizeof(outputDeviceID);
status = AudioDeviceGetProperty(
outputDeviceID, 0, 0,
kAudioDevicePropertyDeviceIsRunning, &propertySize, &result);
status = coreaudio_get_isrunning(outputDeviceID, &result);
if (status != kAudioHardwareNoError) {
coreaudio_logerr(status,
"Could not determine whether Device is playing\n");
@@ -288,7 +511,6 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
{
OSStatus status;
coreaudioVoiceOut *core = (coreaudioVoiceOut *) hw;
UInt32 propertySize;
int err;
const char *typ = "playback";
AudioValueRange frameRange;
@@ -303,12 +525,7 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
audio_pcm_init_info (&hw->info, as);
/* open default output device */
propertySize = sizeof(core->outputDeviceID);
status = AudioHardwareGetProperty(
kAudioHardwarePropertyDefaultOutputDevice,
&propertySize,
&core->outputDeviceID);
status = coreaudio_get_voice(&core->outputDeviceID);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ,
"Could not get default output Device\n");
@@ -320,14 +537,8 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
}
/* get minimum and maximum buffer frame sizes */
propertySize = sizeof(frameRange);
status = AudioDeviceGetProperty(
core->outputDeviceID,
0,
0,
kAudioDevicePropertyBufferFrameSizeRange,
&propertySize,
&frameRange);
status = coreaudio_get_framesizerange(core->outputDeviceID,
&frameRange);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ,
"Could not get device buffer frame range\n");
@@ -347,15 +558,8 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
}
/* set Buffer Frame Size */
propertySize = sizeof(core->audioDevicePropertyBufferFrameSize);
status = AudioDeviceSetProperty(
core->outputDeviceID,
NULL,
0,
false,
kAudioDevicePropertyBufferFrameSize,
propertySize,
&core->audioDevicePropertyBufferFrameSize);
status = coreaudio_set_framesize(core->outputDeviceID,
&core->audioDevicePropertyBufferFrameSize);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ,
"Could not set device buffer frame size %" PRIu32 "\n",
@@ -364,14 +568,8 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
}
/* get Buffer Frame Size */
propertySize = sizeof(core->audioDevicePropertyBufferFrameSize);
status = AudioDeviceGetProperty(
core->outputDeviceID,
0,
false,
kAudioDevicePropertyBufferFrameSize,
&propertySize,
&core->audioDevicePropertyBufferFrameSize);
status = coreaudio_get_framesize(core->outputDeviceID,
&core->audioDevicePropertyBufferFrameSize);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ,
"Could not get device buffer frame size\n");
@@ -380,14 +578,8 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
hw->samples = conf->nbuffers * core->audioDevicePropertyBufferFrameSize;
/* get StreamFormat */
propertySize = sizeof(core->outputStreamBasicDescription);
status = AudioDeviceGetProperty(
core->outputDeviceID,
0,
false,
kAudioDevicePropertyStreamFormat,
&propertySize,
&core->outputStreamBasicDescription);
status = coreaudio_get_streamformat(core->outputDeviceID,
&core->outputStreamBasicDescription);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ,
"Could not get Device Stream properties\n");
@@ -397,15 +589,8 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
/* set Samplerate */
core->outputStreamBasicDescription.mSampleRate = (Float64) as->freq;
propertySize = sizeof(core->outputStreamBasicDescription);
status = AudioDeviceSetProperty(
core->outputDeviceID,
0,
0,
0,
kAudioDevicePropertyStreamFormat,
propertySize,
&core->outputStreamBasicDescription);
status = coreaudio_set_streamformat(core->outputDeviceID,
&core->outputStreamBasicDescription);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ, "Could not set samplerate %d\n",
as->freq);
@@ -414,8 +599,12 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
}
/* set Callback */
status = AudioDeviceAddIOProc(core->outputDeviceID, audioDeviceIOProc, hw);
if (status != kAudioHardwareNoError) {
core->ioprocid = NULL;
status = AudioDeviceCreateIOProcID(core->outputDeviceID,
audioDeviceIOProc,
hw,
&core->ioprocid);
if (status != kAudioHardwareNoError || core->ioprocid == NULL) {
coreaudio_logerr2 (status, typ, "Could not set IOProc\n");
core->outputDeviceID = kAudioDeviceUnknown;
return -1;
@@ -423,10 +612,10 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
/* start Playback */
if (!isPlaying(core->outputDeviceID)) {
status = AudioDeviceStart(core->outputDeviceID, audioDeviceIOProc);
status = AudioDeviceStart(core->outputDeviceID, core->ioprocid);
if (status != kAudioHardwareNoError) {
coreaudio_logerr2 (status, typ, "Could not start playback\n");
AudioDeviceRemoveIOProc(core->outputDeviceID, audioDeviceIOProc);
AudioDeviceDestroyIOProcID(core->outputDeviceID, core->ioprocid);
core->outputDeviceID = kAudioDeviceUnknown;
return -1;
}
@@ -444,15 +633,15 @@ static void coreaudio_fini_out (HWVoiceOut *hw)
if (!isAtexit) {
/* stop playback */
if (isPlaying(core->outputDeviceID)) {
status = AudioDeviceStop(core->outputDeviceID, audioDeviceIOProc);
status = AudioDeviceStop(core->outputDeviceID, core->ioprocid);
if (status != kAudioHardwareNoError) {
coreaudio_logerr (status, "Could not stop playback\n");
}
}
/* remove callback */
status = AudioDeviceRemoveIOProc(core->outputDeviceID,
audioDeviceIOProc);
status = AudioDeviceDestroyIOProcID(core->outputDeviceID,
core->ioprocid);
if (status != kAudioHardwareNoError) {
coreaudio_logerr (status, "Could not remove IOProc\n");
}
@@ -475,7 +664,7 @@ static int coreaudio_ctl_out (HWVoiceOut *hw, int cmd, ...)
case VOICE_ENABLE:
/* start playback */
if (!isPlaying(core->outputDeviceID)) {
status = AudioDeviceStart(core->outputDeviceID, audioDeviceIOProc);
status = AudioDeviceStart(core->outputDeviceID, core->ioprocid);
if (status != kAudioHardwareNoError) {
coreaudio_logerr (status, "Could not resume playback\n");
}
@@ -486,7 +675,8 @@ static int coreaudio_ctl_out (HWVoiceOut *hw, int cmd, ...)
/* stop playback */
if (!isAtexit) {
if (isPlaying(core->outputDeviceID)) {
status = AudioDeviceStop(core->outputDeviceID, audioDeviceIOProc);
status = AudioDeviceStop(core->outputDeviceID,
core->ioprocid);
if (status != kAudioHardwareNoError) {
coreaudio_logerr (status, "Could not pause playback\n");
}

View File

@@ -566,6 +566,7 @@ static CharDriverState *chr_baum_init(const char *id,
ChardevReturn *ret,
Error **errp)
{
ChardevCommon *common = qapi_ChardevDummy_base(backend->u.braille);
BaumDriverState *baum;
CharDriverState *chr;
brlapi_handle_t *handle;
@@ -576,8 +577,12 @@ static CharDriverState *chr_baum_init(const char *id,
#endif
int tty;
chr = qemu_chr_alloc(common, errp);
if (!chr) {
return NULL;
}
baum = g_malloc0(sizeof(BaumDriverState));
baum->chr = chr = qemu_chr_alloc();
baum->chr = chr;
chr->opaque = baum;
chr->chr_write = baum_write;

View File

@@ -68,9 +68,13 @@ static CharDriverState *qemu_chr_open_msmouse(const char *id,
ChardevReturn *ret,
Error **errp)
{
ChardevCommon *common = qapi_ChardevDummy_base(backend->u.msmouse);
CharDriverState *chr;
chr = qemu_chr_alloc();
chr = qemu_chr_alloc(common, errp);
if (!chr) {
return NULL;
}
chr->chr_write = msmouse_chr_write;
chr->chr_close = msmouse_chr_close;
chr->explicit_be_open = true;

491
block.c
View File

@@ -29,6 +29,7 @@
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "qapi/qmp/qerror.h"
#include "qapi/qmp/qbool.h"
#include "qapi/qmp/qjson.h"
#include "sysemu/block-backend.h"
#include "sysemu/sysemu.h"
@@ -623,6 +624,20 @@ static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
return 0;
}
/**
* Combines a QDict of new block driver @options with any missing options taken
* from @old_options, so that leaving out an option defaults to its old value.
*/
static void bdrv_join_options(BlockDriverState *bs, QDict *options,
QDict *old_options)
{
if (bs->drv && bs->drv->bdrv_join_options) {
bs->drv->bdrv_join_options(options, old_options);
} else {
qdict_join(options, old_options, false);
}
}
/**
* Set open flags for a given discard mode
*
@@ -681,60 +696,81 @@ static int bdrv_temp_snapshot_flags(int flags)
}
/*
* Returns the flags that bs->file should get if a protocol driver is expected,
* based on the given flags for the parent BDS
* Returns the options and flags that bs->file should get if a protocol driver
* is expected, based on the given options and flags for the parent BDS
*/
static int bdrv_inherited_flags(int flags)
static void bdrv_inherited_options(int *child_flags, QDict *child_options,
int parent_flags, QDict *parent_options)
{
int flags = parent_flags;
/* Enable protocol handling, disable format probing for bs->file */
flags |= BDRV_O_PROTOCOL;
/* If the cache mode isn't explicitly set, inherit direct and no-flush from
* the parent. */
qdict_copy_default(child_options, parent_options, BDRV_OPT_CACHE_DIRECT);
qdict_copy_default(child_options, parent_options, BDRV_OPT_CACHE_NO_FLUSH);
/* Our block drivers take care to send flushes and respect unmap policy,
* so we can enable both unconditionally on lower layers. */
flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
* so we can default to enable both on lower layers regardless of the
* corresponding parent options. */
qdict_set_default_str(child_options, BDRV_OPT_CACHE_WB, "on");
flags |= BDRV_O_UNMAP;
/* Clear flags that only apply to the top layer */
flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
return flags;
*child_flags = flags;
}
const BdrvChildRole child_file = {
.inherit_flags = bdrv_inherited_flags,
.inherit_options = bdrv_inherited_options,
};
/*
* Returns the flags that bs->file should get if the use of formats (and not
* only protocols) is permitted for it, based on the given flags for the parent
* BDS
* Returns the options and flags that bs->file should get if the use of formats
* (and not only protocols) is permitted for it, based on the given options and
* flags for the parent BDS
*/
static int bdrv_inherited_fmt_flags(int parent_flags)
static void bdrv_inherited_fmt_options(int *child_flags, QDict *child_options,
int parent_flags, QDict *parent_options)
{
int flags = child_file.inherit_flags(parent_flags);
return flags & ~BDRV_O_PROTOCOL;
child_file.inherit_options(child_flags, child_options,
parent_flags, parent_options);
*child_flags &= ~BDRV_O_PROTOCOL;
}
const BdrvChildRole child_format = {
.inherit_flags = bdrv_inherited_fmt_flags,
.inherit_options = bdrv_inherited_fmt_options,
};
/*
* Returns the flags that bs->backing should get, based on the given flags
* for the parent BDS
* Returns the options and flags that bs->backing should get, based on the
* given options and flags for the parent BDS
*/
static int bdrv_backing_flags(int flags)
static void bdrv_backing_options(int *child_flags, QDict *child_options,
int parent_flags, QDict *parent_options)
{
int flags = parent_flags;
/* The cache mode is inherited unmodified for backing files */
qdict_copy_default(child_options, parent_options, BDRV_OPT_CACHE_WB);
qdict_copy_default(child_options, parent_options, BDRV_OPT_CACHE_DIRECT);
qdict_copy_default(child_options, parent_options, BDRV_OPT_CACHE_NO_FLUSH);
/* backing files always opened read-only */
flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
/* snapshot=on is handled on the top layer */
flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
return flags;
*child_flags = flags;
}
static const BdrvChildRole child_backing = {
.inherit_flags = bdrv_backing_flags,
.inherit_options = bdrv_backing_options,
};
static int bdrv_open_flags(BlockDriverState *bs, int flags)
@@ -757,6 +793,42 @@ static int bdrv_open_flags(BlockDriverState *bs, int flags)
return open_flags;
}
static void update_flags_from_options(int *flags, QemuOpts *opts)
{
*flags &= ~BDRV_O_CACHE_MASK;
assert(qemu_opt_find(opts, BDRV_OPT_CACHE_WB));
if (qemu_opt_get_bool(opts, BDRV_OPT_CACHE_WB, false)) {
*flags |= BDRV_O_CACHE_WB;
}
assert(qemu_opt_find(opts, BDRV_OPT_CACHE_NO_FLUSH));
if (qemu_opt_get_bool(opts, BDRV_OPT_CACHE_NO_FLUSH, false)) {
*flags |= BDRV_O_NO_FLUSH;
}
assert(qemu_opt_find(opts, BDRV_OPT_CACHE_DIRECT));
if (qemu_opt_get_bool(opts, BDRV_OPT_CACHE_DIRECT, false)) {
*flags |= BDRV_O_NOCACHE;
}
}
static void update_options_from_flags(QDict *options, int flags)
{
if (!qdict_haskey(options, BDRV_OPT_CACHE_WB)) {
qdict_put(options, BDRV_OPT_CACHE_WB,
qbool_from_bool(flags & BDRV_O_CACHE_WB));
}
if (!qdict_haskey(options, BDRV_OPT_CACHE_DIRECT)) {
qdict_put(options, BDRV_OPT_CACHE_DIRECT,
qbool_from_bool(flags & BDRV_O_NOCACHE));
}
if (!qdict_haskey(options, BDRV_OPT_CACHE_NO_FLUSH)) {
qdict_put(options, BDRV_OPT_CACHE_NO_FLUSH,
qbool_from_bool(flags & BDRV_O_NO_FLUSH));
}
}
static void bdrv_assign_node_name(BlockDriverState *bs,
const char *node_name,
Error **errp)
@@ -803,6 +875,26 @@ static QemuOptsList bdrv_runtime_opts = {
.type = QEMU_OPT_STRING,
.help = "Node name of the block device node",
},
{
.name = "driver",
.type = QEMU_OPT_STRING,
.help = "Block driver to use for the node",
},
{
.name = BDRV_OPT_CACHE_WB,
.type = QEMU_OPT_BOOL,
.help = "Enable writeback mode",
},
{
.name = BDRV_OPT_CACHE_DIRECT,
.type = QEMU_OPT_BOOL,
.help = "Bypass software writeback cache on the host",
},
{
.name = BDRV_OPT_CACHE_NO_FLUSH,
.type = QEMU_OPT_BOOL,
.help = "Ignore flush requests",
},
{ /* end of list */ }
},
};
@@ -813,18 +905,31 @@ static QemuOptsList bdrv_runtime_opts = {
* Removes all processed options from *options.
*/
static int bdrv_open_common(BlockDriverState *bs, BdrvChild *file,
QDict *options, int flags, BlockDriver *drv, Error **errp)
QDict *options, int flags, Error **errp)
{
int ret, open_flags;
const char *filename;
const char *driver_name = NULL;
const char *node_name = NULL;
QemuOpts *opts;
BlockDriver *drv;
Error *local_err = NULL;
assert(drv != NULL);
assert(bs->file == NULL);
assert(options != NULL && bs->options != options);
opts = qemu_opts_create(&bdrv_runtime_opts, NULL, 0, &error_abort);
qemu_opts_absorb_qdict(opts, options, &local_err);
if (local_err) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto fail_opts;
}
driver_name = qemu_opt_get(opts, "driver");
drv = bdrv_find_format(driver_name);
assert(drv != NULL);
if (file != NULL) {
filename = file->bs->filename;
} else {
@@ -834,19 +939,12 @@ static int bdrv_open_common(BlockDriverState *bs, BdrvChild *file,
if (drv->bdrv_needs_filename && !filename) {
error_setg(errp, "The '%s' block driver requires a file name",
drv->format_name);
return -EINVAL;
}
trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
opts = qemu_opts_create(&bdrv_runtime_opts, NULL, 0, &error_abort);
qemu_opts_absorb_qdict(opts, options, &local_err);
if (local_err) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto fail_opts;
}
trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
node_name = qemu_opt_get(opts, "node-name");
bdrv_assign_node_name(bs, node_name, &local_err);
if (local_err) {
@@ -891,7 +989,9 @@ static int bdrv_open_common(BlockDriverState *bs, BdrvChild *file,
bs->drv = drv;
bs->opaque = g_malloc0(drv->instance_size);
bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
/* Apply cache mode options */
update_flags_from_options(&bs->open_flags, opts);
bdrv_set_enable_write_cache(bs, bs->open_flags & BDRV_O_CACHE_WB);
/* Open the image, either directly or using a protocol */
if (drv->bdrv_file_open) {
@@ -984,37 +1084,45 @@ static QDict *parse_json_filename(const char *filename, Error **errp)
return options;
}
static void parse_json_protocol(QDict *options, const char **pfilename,
Error **errp)
{
QDict *json_options;
Error *local_err = NULL;
/* Parse json: pseudo-protocol */
if (!*pfilename || !g_str_has_prefix(*pfilename, "json:")) {
return;
}
json_options = parse_json_filename(*pfilename, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
/* Options given in the filename have lower priority than options
* specified directly */
qdict_join(options, json_options, false);
QDECREF(json_options);
*pfilename = NULL;
}
/*
* Fills in default options for opening images and converts the legacy
* filename/flags pair to option QDict entries.
* The BDRV_O_PROTOCOL flag in *flags will be set or cleared accordingly if a
* block driver has been specified explicitly.
*/
static int bdrv_fill_options(QDict **options, const char **pfilename,
static int bdrv_fill_options(QDict **options, const char *filename,
int *flags, Error **errp)
{
const char *filename = *pfilename;
const char *drvname;
bool protocol = *flags & BDRV_O_PROTOCOL;
bool parse_filename = false;
BlockDriver *drv = NULL;
Error *local_err = NULL;
/* Parse json: pseudo-protocol */
if (filename && g_str_has_prefix(filename, "json:")) {
QDict *json_options = parse_json_filename(filename, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return -EINVAL;
}
/* Options given in the filename have lower priority than options
* specified directly */
qdict_join(*options, json_options, false);
QDECREF(json_options);
*pfilename = filename = NULL;
}
drvname = qdict_get_try_str(*options, "driver");
if (drvname) {
drv = bdrv_find_format(drvname);
@@ -1033,6 +1141,9 @@ static int bdrv_fill_options(QDict **options, const char **pfilename,
*flags &= ~BDRV_O_PROTOCOL;
}
/* Translate cache options from flags into options */
update_options_from_flags(*options, *flags);
/* Fetch the file name from the options QDict if necessary */
if (protocol && filename) {
if (!qdict_haskey(*options, "filename")) {
@@ -1087,11 +1198,13 @@ static int bdrv_fill_options(QDict **options, const char **pfilename,
static BdrvChild *bdrv_attach_child(BlockDriverState *parent_bs,
BlockDriverState *child_bs,
const char *child_name,
const BdrvChildRole *child_role)
{
BdrvChild *child = g_new(BdrvChild, 1);
*child = (BdrvChild) {
.bs = child_bs,
.name = g_strdup(child_name),
.role = child_role,
};
@@ -1105,6 +1218,7 @@ static void bdrv_detach_child(BdrvChild *child)
{
QLIST_REMOVE(child, next);
QLIST_REMOVE(child, next_parent);
g_free(child->name);
g_free(child);
}
@@ -1151,7 +1265,7 @@ void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
bs->backing = NULL;
goto out;
}
bs->backing = bdrv_attach_child(bs, backing_hd, &child_backing);
bs->backing = bdrv_attach_child(bs, backing_hd, "backing", &child_backing);
bs->open_flags &= ~BDRV_O_NO_BACKING;
pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
pstrcpy(bs->backing_format, sizeof(bs->backing_format),
@@ -1168,30 +1282,43 @@ out:
/*
* Opens the backing file for a BlockDriverState if not yet open
*
* options is a QDict of options to pass to the block drivers, or NULL for an
* empty set of options. The reference to the QDict is transferred to this
* function (even on failure), so if the caller intends to reuse the dictionary,
* it needs to use QINCREF() before calling bdrv_file_open.
* bdref_key specifies the key for the image's BlockdevRef in the options QDict.
* That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
* itself, all options starting with "${bdref_key}." are considered part of the
* BlockdevRef.
*
* TODO Can this be unified with bdrv_open_image()?
*/
int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
int bdrv_open_backing_file(BlockDriverState *bs, QDict *parent_options,
const char *bdref_key, Error **errp)
{
char *backing_filename = g_malloc0(PATH_MAX);
char *bdref_key_dot;
const char *reference = NULL;
int ret = 0;
BlockDriverState *backing_hd;
QDict *options;
QDict *tmp_parent_options = NULL;
Error *local_err = NULL;
if (bs->backing != NULL) {
QDECREF(options);
goto free_exit;
}
/* NULL means an empty set of options */
if (options == NULL) {
options = qdict_new();
if (parent_options == NULL) {
tmp_parent_options = qdict_new();
parent_options = tmp_parent_options;
}
bs->open_flags &= ~BDRV_O_NO_BACKING;
if (qdict_haskey(options, "file.filename")) {
bdref_key_dot = g_strdup_printf("%s.", bdref_key);
qdict_extract_subqdict(parent_options, &options, bdref_key_dot);
g_free(bdref_key_dot);
reference = qdict_get_try_str(parent_options, bdref_key);
if (reference || qdict_haskey(options, "file.filename")) {
backing_filename[0] = '\0';
} else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
QDECREF(options);
@@ -1214,23 +1341,18 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
goto free_exit;
}
backing_hd = bdrv_new();
if (bs->backing_format[0] != '\0' && !qdict_haskey(options, "driver")) {
qdict_put(options, "driver", qstring_from_str(bs->backing_format));
}
assert(bs->backing == NULL);
backing_hd = NULL;
ret = bdrv_open_inherit(&backing_hd,
*backing_filename ? backing_filename : NULL,
NULL, options, 0, bs, &child_backing, &local_err);
reference, options, 0, bs, &child_backing,
errp);
if (ret < 0) {
bdrv_unref(backing_hd);
backing_hd = NULL;
bs->open_flags |= BDRV_O_NO_BACKING;
error_setg(errp, "Could not open backing file: %s",
error_get_pretty(local_err));
error_free(local_err);
error_prepend(errp, "Could not open backing file: ");
goto free_exit;
}
@@ -1239,8 +1361,11 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
bdrv_set_backing_hd(bs, backing_hd);
bdrv_unref(backing_hd);
qdict_del(parent_options, bdref_key);
free_exit:
g_free(backing_filename);
QDECREF(tmp_parent_options);
return ret;
}
@@ -1294,7 +1419,7 @@ BdrvChild *bdrv_open_child(const char *filename,
goto done;
}
c = bdrv_attach_child(parent, bs, child_role);
c = bdrv_attach_child(parent, bs, bdref_key, child_role);
done:
qdict_del(options, bdref_key);
@@ -1333,13 +1458,11 @@ int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
opts = qemu_opts_create(bdrv_qcow2.create_opts, NULL, 0,
&error_abort);
qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size, &error_abort);
ret = bdrv_create(&bdrv_qcow2, tmp_filename, opts, &local_err);
ret = bdrv_create(&bdrv_qcow2, tmp_filename, opts, errp);
qemu_opts_del(opts);
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not create temporary overlay "
"'%s': %s", tmp_filename,
error_get_pretty(local_err));
error_free(local_err);
error_prepend(errp, "Could not create temporary overlay '%s': ",
tmp_filename);
goto out;
}
@@ -1437,21 +1560,34 @@ static int bdrv_open_inherit(BlockDriverState **pbs, const char *filename,
options = qdict_new();
}
if (child_role) {
bs->inherits_from = parent;
flags = child_role->inherit_flags(parent->open_flags);
/* json: syntax counts as explicit options, as if in the QDict */
parse_json_protocol(options, &filename, &local_err);
if (local_err) {
ret = -EINVAL;
goto fail;
}
ret = bdrv_fill_options(&options, &filename, &flags, &local_err);
bs->explicit_options = qdict_clone_shallow(options);
if (child_role) {
bs->inherits_from = parent;
child_role->inherit_options(&flags, options,
parent->open_flags, parent->options);
}
ret = bdrv_fill_options(&options, filename, &flags, &local_err);
if (local_err) {
goto fail;
}
bs->open_flags = flags;
bs->options = options;
options = qdict_clone_shallow(options);
/* Find the right image format driver */
drvname = qdict_get_try_str(options, "driver");
if (drvname) {
drv = bdrv_find_format(drvname);
qdict_del(options, "driver");
if (!drv) {
error_setg(errp, "Unknown driver: '%s'", drvname);
ret = -EINVAL;
@@ -1467,10 +1603,6 @@ static int bdrv_open_inherit(BlockDriverState **pbs, const char *filename,
qdict_del(options, "backing");
}
bs->open_flags = flags;
bs->options = options;
options = qdict_clone_shallow(options);
/* Open image file without format layer */
if ((flags & BDRV_O_PROTOCOL) == 0) {
if (flags & BDRV_O_RDWR) {
@@ -1478,7 +1610,7 @@ static int bdrv_open_inherit(BlockDriverState **pbs, const char *filename,
}
if (flags & BDRV_O_SNAPSHOT) {
snapshot_flags = bdrv_temp_snapshot_flags(flags);
flags = bdrv_backing_flags(flags);
bdrv_backing_options(&flags, options, flags, options);
}
bs->open_flags = flags;
@@ -1498,6 +1630,19 @@ static int bdrv_open_inherit(BlockDriverState **pbs, const char *filename,
if (ret < 0) {
goto fail;
}
/*
* This option update would logically belong in bdrv_fill_options(),
* but we first need to open bs->file for the probing to work, while
* opening bs->file already requires the (mostly) final set of options
* so that cache mode etc. can be inherited.
*
* Adding the driver later is somewhat ugly, but it's not an option
* that would ever be inherited, so it's correct. We just need to make
* sure to update both bs->options (which has the full effective
* options for bs) and options (which has file.* already removed).
*/
qdict_put(bs->options, "driver", qstring_from_str(drv->format_name));
qdict_put(options, "driver", qstring_from_str(drv->format_name));
} else if (!drv) {
error_setg(errp, "Must specify either driver or file");
ret = -EINVAL;
@@ -1511,7 +1656,7 @@ static int bdrv_open_inherit(BlockDriverState **pbs, const char *filename,
assert(!(flags & BDRV_O_PROTOCOL) || !file);
/* Open the image */
ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
ret = bdrv_open_common(bs, file, options, flags, &local_err);
if (ret < 0) {
goto fail;
}
@@ -1523,10 +1668,7 @@ static int bdrv_open_inherit(BlockDriverState **pbs, const char *filename,
/* If there is a backing file, use it */
if ((flags & BDRV_O_NO_BACKING) == 0) {
QDict *backing_options;
qdict_extract_subqdict(options, &backing_options, "backing.");
ret = bdrv_open_backing_file(bs, backing_options, &local_err);
ret = bdrv_open_backing_file(bs, options, "backing", &local_err);
if (ret < 0) {
goto close_and_fail;
}
@@ -1581,6 +1723,7 @@ fail:
if (file != NULL) {
bdrv_unref_child(bs, file);
}
QDECREF(bs->explicit_options);
QDECREF(bs->options);
QDECREF(options);
bs->options = NULL;
@@ -1643,15 +1786,19 @@ typedef struct BlockReopenQueueEntry {
* bs_queue, or the existing bs_queue being used.
*
*/
BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
BlockDriverState *bs,
QDict *options, int flags)
static BlockReopenQueue *bdrv_reopen_queue_child(BlockReopenQueue *bs_queue,
BlockDriverState *bs,
QDict *options,
int flags,
const BdrvChildRole *role,
QDict *parent_options,
int parent_flags)
{
assert(bs != NULL);
BlockReopenQueueEntry *bs_entry;
BdrvChild *child;
QDict *old_options;
QDict *old_options, *explicit_options;
if (bs_queue == NULL) {
bs_queue = g_new0(BlockReopenQueue, 1);
@@ -1662,23 +1809,63 @@ BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
options = qdict_new();
}
/*
* Precedence of options:
* 1. Explicitly passed in options (highest)
* 2. Set in flags (only for top level)
* 3. Retained from explicitly set options of bs
* 4. Inherited from parent node
* 5. Retained from effective options of bs
*/
if (!parent_options) {
/*
* Any setting represented by flags is always updated. If the
* corresponding QDict option is set, it takes precedence. Otherwise
* the flag is translated into a QDict option. The old setting of bs is
* not considered.
*/
update_options_from_flags(options, flags);
}
/* Old explicitly set values (don't overwrite by inherited value) */
old_options = qdict_clone_shallow(bs->explicit_options);
bdrv_join_options(bs, options, old_options);
QDECREF(old_options);
explicit_options = qdict_clone_shallow(options);
/* Inherit from parent node */
if (parent_options) {
assert(!flags);
role->inherit_options(&flags, options, parent_flags, parent_options);
}
/* Old values are used for options that aren't set yet */
old_options = qdict_clone_shallow(bs->options);
qdict_join(options, old_options, false);
bdrv_join_options(bs, options, old_options);
QDECREF(old_options);
/* bdrv_open() masks this flag out */
flags &= ~BDRV_O_PROTOCOL;
QLIST_FOREACH(child, &bs->children, next) {
int child_flags;
QDict *new_child_options;
char *child_key_dot;
/* reopen can only change the options of block devices that were
* implicitly created and inherited options. For other (referenced)
* block devices, a syntax like "backing.foo" results in an error. */
if (child->bs->inherits_from != bs) {
continue;
}
child_flags = child->role->inherit_flags(flags);
/* TODO Pass down child flags (backing.*, extents.*, ...) */
bdrv_reopen_queue(bs_queue, child->bs, NULL, child_flags);
child_key_dot = g_strdup_printf("%s.", child->name);
qdict_extract_subqdict(options, &new_child_options, child_key_dot);
g_free(child_key_dot);
bdrv_reopen_queue_child(bs_queue, child->bs, new_child_options, 0,
child->role, options, flags);
}
bs_entry = g_new0(BlockReopenQueueEntry, 1);
@@ -1686,11 +1873,20 @@ BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
bs_entry->state.bs = bs;
bs_entry->state.options = options;
bs_entry->state.explicit_options = explicit_options;
bs_entry->state.flags = flags;
return bs_queue;
}
BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
BlockDriverState *bs,
QDict *options, int flags)
{
return bdrv_reopen_queue_child(bs_queue, bs, options, flags,
NULL, NULL, 0);
}
/*
* Reopen multiple BlockDriverStates atomically & transactionally.
*
@@ -1737,6 +1933,8 @@ cleanup:
QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
if (ret && bs_entry->prepared) {
bdrv_reopen_abort(&bs_entry->state);
} else if (ret) {
QDECREF(bs_entry->state.explicit_options);
}
QDECREF(bs_entry->state.options);
g_free(bs_entry);
@@ -1784,11 +1982,47 @@ int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
int ret = -1;
Error *local_err = NULL;
BlockDriver *drv;
QemuOpts *opts;
const char *value;
assert(reopen_state != NULL);
assert(reopen_state->bs->drv != NULL);
drv = reopen_state->bs->drv;
/* Process generic block layer options */
opts = qemu_opts_create(&bdrv_runtime_opts, NULL, 0, &error_abort);
qemu_opts_absorb_qdict(opts, reopen_state->options, &local_err);
if (local_err) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto error;
}
update_flags_from_options(&reopen_state->flags, opts);
/* If a guest device is attached, it owns WCE */
if (reopen_state->bs->blk && blk_get_attached_dev(reopen_state->bs->blk)) {
bool old_wce = bdrv_enable_write_cache(reopen_state->bs);
bool new_wce = (reopen_state->flags & BDRV_O_CACHE_WB);
if (old_wce != new_wce) {
error_setg(errp, "Cannot change cache.writeback: Device attached");
ret = -EINVAL;
goto error;
}
}
/* node-name and driver must be unchanged. Put them back into the QDict, so
* that they are checked at the end of this function. */
value = qemu_opt_get(opts, "node-name");
if (value) {
qdict_put(reopen_state->options, "node-name", qstring_from_str(value));
}
value = qemu_opt_get(opts, "driver");
if (value) {
qdict_put(reopen_state->options, "driver", qstring_from_str(value));
}
/* if we are to stay read-only, do not allow permission change
* to r/w */
if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
@@ -1849,6 +2083,7 @@ int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
ret = 0;
error:
qemu_opts_del(opts);
return ret;
}
@@ -1871,6 +2106,9 @@ void bdrv_reopen_commit(BDRVReopenState *reopen_state)
}
/* set BDS specific flags now */
QDECREF(reopen_state->bs->explicit_options);
reopen_state->bs->explicit_options = reopen_state->explicit_options;
reopen_state->bs->open_flags = reopen_state->flags;
reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
BDRV_O_CACHE_WB);
@@ -1894,6 +2132,8 @@ void bdrv_reopen_abort(BDRVReopenState *reopen_state)
if (drv->bdrv_reopen_abort) {
drv->bdrv_reopen_abort(reopen_state);
}
QDECREF(reopen_state->explicit_options);
}
@@ -1910,9 +2150,10 @@ void bdrv_close(BlockDriverState *bs)
bdrv_io_limits_disable(bs);
}
bdrv_drain(bs); /* complete I/O */
bdrv_drained_begin(bs); /* complete I/O */
bdrv_flush(bs);
bdrv_drain(bs); /* in case flush left pending I/O */
notifier_list_notify(&bs->close_notifiers, bs);
if (bs->blk) {
@@ -1952,6 +2193,7 @@ void bdrv_close(BlockDriverState *bs)
bs->sg = 0;
bs->zero_beyond_eof = false;
QDECREF(bs->options);
QDECREF(bs->explicit_options);
bs->options = NULL;
QDECREF(bs->full_open_options);
bs->full_open_options = NULL;
@@ -1961,6 +2203,7 @@ void bdrv_close(BlockDriverState *bs)
g_free(ban);
}
QLIST_INIT(&bs->aio_notifiers);
bdrv_drained_end(bs);
}
void bdrv_close_all(void)
@@ -2851,7 +3094,7 @@ ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
return NULL;
}
void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
void bdrv_debug_event(BlockDriverState *bs, BlkdebugEvent event)
{
if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
return;
@@ -3483,9 +3726,9 @@ bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
if (!QLIST_EMPTY(&bs->op_blockers[op])) {
blocker = QLIST_FIRST(&bs->op_blockers[op]);
if (errp) {
error_setg(errp, "Node '%s' is busy: %s",
bdrv_get_device_or_node_name(bs),
error_get_pretty(blocker->reason));
*errp = error_copy(blocker->reason);
error_prepend(errp, "Node '%s' is busy: ",
bdrv_get_device_or_node_name(bs));
}
return true;
}
@@ -3823,12 +4066,12 @@ void bdrv_remove_aio_context_notifier(BlockDriverState *bs,
}
int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts,
BlockDriverAmendStatusCB *status_cb)
BlockDriverAmendStatusCB *status_cb, void *cb_opaque)
{
if (!bs->drv->bdrv_amend_options) {
return -ENOTSUP;
}
return bs->drv->bdrv_amend_options(bs, opts, status_cb);
return bs->drv->bdrv_amend_options(bs, opts, status_cb, cb_opaque);
}
/* This function will be called by the bdrv_recurse_is_first_non_filter method
@@ -3926,20 +4169,39 @@ out:
static bool append_open_options(QDict *d, BlockDriverState *bs)
{
const QDictEntry *entry;
QemuOptDesc *desc;
BdrvChild *child;
bool found_any = false;
const char *p;
for (entry = qdict_first(bs->options); entry;
entry = qdict_next(bs->options, entry))
{
/* Only take options for this level and exclude all non-driver-specific
* options */
if (!strchr(qdict_entry_key(entry), '.') &&
strcmp(qdict_entry_key(entry), "node-name"))
{
qobject_incref(qdict_entry_value(entry));
qdict_put_obj(d, qdict_entry_key(entry), qdict_entry_value(entry));
found_any = true;
/* Exclude options for children */
QLIST_FOREACH(child, &bs->children, next) {
if (strstart(qdict_entry_key(entry), child->name, &p)
&& (!*p || *p == '.'))
{
break;
}
}
if (child) {
continue;
}
/* And exclude all non-driver-specific options */
for (desc = bdrv_runtime_opts.desc; desc->name; desc++) {
if (!strcmp(qdict_entry_key(entry), desc->name)) {
break;
}
}
if (desc->name) {
continue;
}
qobject_incref(qdict_entry_value(entry));
qdict_put_obj(d, qdict_entry_key(entry), qdict_entry_value(entry));
found_any = true;
}
return found_any;
@@ -3981,7 +4243,10 @@ void bdrv_refresh_filename(BlockDriverState *bs)
bs->full_open_options = NULL;
}
drv->bdrv_refresh_filename(bs);
opts = qdict_new();
append_open_options(opts, bs);
drv->bdrv_refresh_filename(bs, opts);
QDECREF(opts);
} else if (bs->file) {
/* Try to reconstruct valid information from the underlying file */
bool has_open_options;

View File

@@ -36,7 +36,7 @@ typedef struct BDRVBlkdebugState {
int state;
int new_state;
QLIST_HEAD(, BlkdebugRule) rules[BLKDBG_EVENT_MAX];
QLIST_HEAD(, BlkdebugRule) rules[BLKDBG__MAX];
QSIMPLEQ_HEAD(, BlkdebugRule) active_rules;
QLIST_HEAD(, BlkdebugSuspendedReq) suspended_reqs;
} BDRVBlkdebugState;
@@ -64,7 +64,7 @@ enum {
};
typedef struct BlkdebugRule {
BlkDebugEvent event;
BlkdebugEvent event;
int action;
int state;
union {
@@ -143,69 +143,12 @@ static QemuOptsList *config_groups[] = {
NULL
};
static const char *event_names[BLKDBG_EVENT_MAX] = {
[BLKDBG_L1_UPDATE] = "l1_update",
[BLKDBG_L1_GROW_ALLOC_TABLE] = "l1_grow.alloc_table",
[BLKDBG_L1_GROW_WRITE_TABLE] = "l1_grow.write_table",
[BLKDBG_L1_GROW_ACTIVATE_TABLE] = "l1_grow.activate_table",
[BLKDBG_L2_LOAD] = "l2_load",
[BLKDBG_L2_UPDATE] = "l2_update",
[BLKDBG_L2_UPDATE_COMPRESSED] = "l2_update_compressed",
[BLKDBG_L2_ALLOC_COW_READ] = "l2_alloc.cow_read",
[BLKDBG_L2_ALLOC_WRITE] = "l2_alloc.write",
[BLKDBG_READ_AIO] = "read_aio",
[BLKDBG_READ_BACKING_AIO] = "read_backing_aio",
[BLKDBG_READ_COMPRESSED] = "read_compressed",
[BLKDBG_WRITE_AIO] = "write_aio",
[BLKDBG_WRITE_COMPRESSED] = "write_compressed",
[BLKDBG_VMSTATE_LOAD] = "vmstate_load",
[BLKDBG_VMSTATE_SAVE] = "vmstate_save",
[BLKDBG_COW_READ] = "cow_read",
[BLKDBG_COW_WRITE] = "cow_write",
[BLKDBG_REFTABLE_LOAD] = "reftable_load",
[BLKDBG_REFTABLE_GROW] = "reftable_grow",
[BLKDBG_REFTABLE_UPDATE] = "reftable_update",
[BLKDBG_REFBLOCK_LOAD] = "refblock_load",
[BLKDBG_REFBLOCK_UPDATE] = "refblock_update",
[BLKDBG_REFBLOCK_UPDATE_PART] = "refblock_update_part",
[BLKDBG_REFBLOCK_ALLOC] = "refblock_alloc",
[BLKDBG_REFBLOCK_ALLOC_HOOKUP] = "refblock_alloc.hookup",
[BLKDBG_REFBLOCK_ALLOC_WRITE] = "refblock_alloc.write",
[BLKDBG_REFBLOCK_ALLOC_WRITE_BLOCKS] = "refblock_alloc.write_blocks",
[BLKDBG_REFBLOCK_ALLOC_WRITE_TABLE] = "refblock_alloc.write_table",
[BLKDBG_REFBLOCK_ALLOC_SWITCH_TABLE] = "refblock_alloc.switch_table",
[BLKDBG_CLUSTER_ALLOC] = "cluster_alloc",
[BLKDBG_CLUSTER_ALLOC_BYTES] = "cluster_alloc_bytes",
[BLKDBG_CLUSTER_FREE] = "cluster_free",
[BLKDBG_FLUSH_TO_OS] = "flush_to_os",
[BLKDBG_FLUSH_TO_DISK] = "flush_to_disk",
[BLKDBG_PWRITEV_RMW_HEAD] = "pwritev_rmw.head",
[BLKDBG_PWRITEV_RMW_AFTER_HEAD] = "pwritev_rmw.after_head",
[BLKDBG_PWRITEV_RMW_TAIL] = "pwritev_rmw.tail",
[BLKDBG_PWRITEV_RMW_AFTER_TAIL] = "pwritev_rmw.after_tail",
[BLKDBG_PWRITEV] = "pwritev",
[BLKDBG_PWRITEV_ZERO] = "pwritev_zero",
[BLKDBG_PWRITEV_DONE] = "pwritev_done",
[BLKDBG_EMPTY_IMAGE_PREPARE] = "empty_image_prepare",
};
static int get_event_by_name(const char *name, BlkDebugEvent *event)
static int get_event_by_name(const char *name, BlkdebugEvent *event)
{
int i;
for (i = 0; i < BLKDBG_EVENT_MAX; i++) {
if (!strcmp(event_names[i], name)) {
for (i = 0; i < BLKDBG__MAX; i++) {
if (!strcmp(BlkdebugEvent_lookup[i], name)) {
*event = i;
return 0;
}
@@ -224,7 +167,7 @@ static int add_rule(void *opaque, QemuOpts *opts, Error **errp)
struct add_rule_data *d = opaque;
BDRVBlkdebugState *s = d->s;
const char* event_name;
BlkDebugEvent event;
BlkdebugEvent event;
struct BlkdebugRule *rule;
/* Find the right event for the rule */
@@ -564,7 +507,7 @@ static void blkdebug_close(BlockDriverState *bs)
BlkdebugRule *rule, *next;
int i;
for (i = 0; i < BLKDBG_EVENT_MAX; i++) {
for (i = 0; i < BLKDBG__MAX; i++) {
QLIST_FOREACH_SAFE(rule, &s->rules[i], next, next) {
remove_rule(rule);
}
@@ -627,13 +570,13 @@ static bool process_rule(BlockDriverState *bs, struct BlkdebugRule *rule,
return injected;
}
static void blkdebug_debug_event(BlockDriverState *bs, BlkDebugEvent event)
static void blkdebug_debug_event(BlockDriverState *bs, BlkdebugEvent event)
{
BDRVBlkdebugState *s = bs->opaque;
struct BlkdebugRule *rule, *next;
bool injected;
assert((int)event >= 0 && event < BLKDBG_EVENT_MAX);
assert((int)event >= 0 && event < BLKDBG__MAX);
injected = false;
s->new_state = s->state;
@@ -648,7 +591,7 @@ static int blkdebug_debug_breakpoint(BlockDriverState *bs, const char *event,
{
BDRVBlkdebugState *s = bs->opaque;
struct BlkdebugRule *rule;
BlkDebugEvent blkdebug_event;
BlkdebugEvent blkdebug_event;
if (get_event_by_name(event, &blkdebug_event) < 0) {
return -ENOENT;
@@ -690,7 +633,7 @@ static int blkdebug_debug_remove_breakpoint(BlockDriverState *bs,
BlkdebugRule *rule, *next;
int i, ret = -ENOENT;
for (i = 0; i < BLKDBG_EVENT_MAX; i++) {
for (i = 0; i < BLKDBG__MAX; i++) {
QLIST_FOREACH_SAFE(rule, &s->rules[i], next, next) {
if (rule->action == ACTION_SUSPEND &&
!strcmp(rule->options.suspend.tag, tag)) {
@@ -731,17 +674,15 @@ static int blkdebug_truncate(BlockDriverState *bs, int64_t offset)
return bdrv_truncate(bs->file->bs, offset);
}
static void blkdebug_refresh_filename(BlockDriverState *bs)
static void blkdebug_refresh_filename(BlockDriverState *bs, QDict *options)
{
QDict *opts;
const QDictEntry *e;
bool force_json = false;
for (e = qdict_first(bs->options); e; e = qdict_next(bs->options, e)) {
for (e = qdict_first(options); e; e = qdict_next(options, e)) {
if (strcmp(qdict_entry_key(e), "config") &&
strcmp(qdict_entry_key(e), "x-image") &&
strcmp(qdict_entry_key(e), "image") &&
strncmp(qdict_entry_key(e), "image.", strlen("image.")))
strcmp(qdict_entry_key(e), "x-image"))
{
force_json = true;
break;
@@ -757,7 +698,7 @@ static void blkdebug_refresh_filename(BlockDriverState *bs)
if (!force_json && bs->file->bs->exact_filename[0]) {
snprintf(bs->exact_filename, sizeof(bs->exact_filename),
"blkdebug:%s:%s",
qdict_get_try_str(bs->options, "config") ?: "",
qdict_get_try_str(options, "config") ?: "",
bs->file->bs->exact_filename);
}
@@ -767,11 +708,8 @@ static void blkdebug_refresh_filename(BlockDriverState *bs)
QINCREF(bs->file->bs->full_open_options);
qdict_put_obj(opts, "image", QOBJECT(bs->file->bs->full_open_options));
for (e = qdict_first(bs->options); e; e = qdict_next(bs->options, e)) {
if (strcmp(qdict_entry_key(e), "x-image") &&
strcmp(qdict_entry_key(e), "image") &&
strncmp(qdict_entry_key(e), "image.", strlen("image.")))
{
for (e = qdict_first(options); e; e = qdict_next(options, e)) {
if (strcmp(qdict_entry_key(e), "x-image")) {
qobject_incref(qdict_entry_value(e));
qdict_put_obj(opts, qdict_entry_key(e), qdict_entry_value(e));
}
@@ -780,6 +718,12 @@ static void blkdebug_refresh_filename(BlockDriverState *bs)
bs->full_open_options = opts;
}
static int blkdebug_reopen_prepare(BDRVReopenState *reopen_state,
BlockReopenQueue *queue, Error **errp)
{
return 0;
}
static BlockDriver bdrv_blkdebug = {
.format_name = "blkdebug",
.protocol_name = "blkdebug",
@@ -788,6 +732,7 @@ static BlockDriver bdrv_blkdebug = {
.bdrv_parse_filename = blkdebug_parse_filename,
.bdrv_file_open = blkdebug_open,
.bdrv_close = blkdebug_close,
.bdrv_reopen_prepare = blkdebug_reopen_prepare,
.bdrv_getlength = blkdebug_getlength,
.bdrv_truncate = blkdebug_truncate,
.bdrv_refresh_filename = blkdebug_refresh_filename,

View File

@@ -307,7 +307,7 @@ static void blkverify_attach_aio_context(BlockDriverState *bs,
bdrv_attach_aio_context(s->test_file->bs, new_context);
}
static void blkverify_refresh_filename(BlockDriverState *bs)
static void blkverify_refresh_filename(BlockDriverState *bs, QDict *options)
{
BDRVBlkverifyState *s = bs->opaque;

View File

@@ -1023,11 +1023,21 @@ int blk_get_max_transfer_length(BlockBackend *blk)
}
}
int blk_get_max_iov(BlockBackend *blk)
{
return blk->bs->bl.max_iov;
}
void blk_set_guest_block_size(BlockBackend *blk, int align)
{
blk->guest_block_size = align;
}
void *blk_try_blockalign(BlockBackend *blk, size_t size)
{
return qemu_try_blockalign(blk ? blk->bs : NULL, size);
}
void *blk_blockalign(BlockBackend *blk, size_t size)
{
return qemu_blockalign(blk ? blk->bs : NULL, size);

View File

@@ -166,9 +166,13 @@ void bdrv_refresh_limits(BlockDriverState *bs, Error **errp)
bs->bl.max_transfer_length = bs->file->bs->bl.max_transfer_length;
bs->bl.min_mem_alignment = bs->file->bs->bl.min_mem_alignment;
bs->bl.opt_mem_alignment = bs->file->bs->bl.opt_mem_alignment;
bs->bl.max_iov = bs->file->bs->bl.max_iov;
} else {
bs->bl.min_mem_alignment = 512;
bs->bl.opt_mem_alignment = getpagesize();
/* Safe default since most protocols use readv()/writev()/etc */
bs->bl.max_iov = IOV_MAX;
}
if (bs->backing) {
@@ -189,6 +193,9 @@ void bdrv_refresh_limits(BlockDriverState *bs, Error **errp)
bs->bl.min_mem_alignment =
MAX(bs->bl.min_mem_alignment,
bs->backing->bs->bl.min_mem_alignment);
bs->bl.max_iov =
MIN(bs->bl.max_iov,
bs->backing->bs->bl.max_iov);
}
/* Then let the driver override it */
@@ -1882,7 +1889,8 @@ static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
merge = 1;
}
if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 >
bs->bl.max_iov) {
merge = 0;
}
@@ -2614,10 +2622,11 @@ int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
bdrv_co_ioctl_entry(&data);
} else {
Coroutine *co = qemu_coroutine_create(bdrv_co_ioctl_entry);
qemu_coroutine_enter(co, &data);
}
while (data.ret == -EINPROGRESS) {
aio_poll(bdrv_get_aio_context(bs), true);
while (data.ret == -EINPROGRESS) {
aio_poll(bdrv_get_aio_context(bs), true);
}
}
return data.ret;
}

View File

@@ -1243,8 +1243,13 @@ static void iscsi_readcapacity_sync(IscsiLun *iscsilun, Error **errp)
iscsilun->lbprz = !!rc16->lbprz;
iscsilun->use_16_for_rw = (rc16->returned_lba > 0xffffffff);
}
break;
}
break;
if (task != NULL && task->status == SCSI_STATUS_CHECK_CONDITION
&& task->sense.key == SCSI_SENSE_UNIT_ATTENTION) {
break;
}
/* Fall through and try READ CAPACITY(10) instead. */
case TYPE_ROM:
task = iscsi_readcapacity10_sync(iscsilun->iscsi, iscsilun->lun, 0, 0);
if (task != NULL && task->status == SCSI_STATUS_GOOD) {
@@ -1270,7 +1275,7 @@ static void iscsi_readcapacity_sync(IscsiLun *iscsilun, Error **errp)
&& retries-- > 0);
if (task == NULL || task->status != SCSI_STATUS_GOOD) {
error_setg(errp, "iSCSI: failed to send readcapacity10 command.");
error_setg(errp, "iSCSI: failed to send readcapacity10/16 command");
} else if (!iscsilun->block_size ||
iscsilun->block_size % BDRV_SECTOR_SIZE) {
error_setg(errp, "iSCSI: the target returned an invalid "

View File

@@ -18,6 +18,7 @@
#include "qapi/qmp/qerror.h"
#include "qemu/ratelimit.h"
#include "qemu/bitmap.h"
#include "qemu/error-report.h"
#define SLICE_TIME 100000000ULL /* ns */
#define MAX_IN_FLIGHT 16
@@ -160,13 +161,15 @@ static void mirror_read_complete(void *opaque, int ret)
static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
{
BlockDriverState *source = s->common.bs;
int nb_sectors, sectors_per_chunk, nb_chunks;
int nb_sectors, sectors_per_chunk, nb_chunks, max_iov;
int64_t end, sector_num, next_chunk, next_sector, hbitmap_next_sector;
uint64_t delay_ns = 0;
MirrorOp *op;
int pnum;
int64_t ret;
max_iov = MIN(source->bl.max_iov, s->target->bl.max_iov);
s->sector_num = hbitmap_iter_next(&s->hbi);
if (s->sector_num < 0) {
bdrv_dirty_iter_init(s->dirty_bitmap, &s->hbi);
@@ -247,7 +250,7 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
trace_mirror_break_buf_busy(s, nb_chunks, s->in_flight);
break;
}
if (IOV_MAX < nb_chunks + added_chunks) {
if (max_iov < nb_chunks + added_chunks) {
trace_mirror_break_iov_max(s, nb_chunks, added_chunks);
break;
}
@@ -370,11 +373,22 @@ static void mirror_exit(BlockJob *job, void *opaque)
if (s->to_replace) {
to_replace = s->to_replace;
}
/* This was checked in mirror_start_job(), but meanwhile one of the
* nodes could have been newly attached to a BlockBackend. */
if (to_replace->blk && s->target->blk) {
error_report("block job: Can't create node with two BlockBackends");
data->ret = -EINVAL;
goto out;
}
if (bdrv_get_flags(s->target) != bdrv_get_flags(to_replace)) {
bdrv_reopen(s->target, bdrv_get_flags(to_replace), NULL);
}
bdrv_replace_in_backing_chain(to_replace, s->target);
}
out:
if (s->to_replace) {
bdrv_op_unblock_all(s->to_replace, s->replace_blocker);
error_free(s->replace_blocker);
@@ -640,7 +654,7 @@ static void mirror_complete(BlockJob *job, Error **errp)
Error *local_err = NULL;
int ret;
ret = bdrv_open_backing_file(s->target, NULL, &local_err);
ret = bdrv_open_backing_file(s->target, NULL, "backing", &local_err);
if (ret < 0) {
error_propagate(errp, local_err);
return;
@@ -705,6 +719,7 @@ static void mirror_start_job(BlockDriverState *bs, BlockDriverState *target,
bool is_none_mode, BlockDriverState *base)
{
MirrorBlockJob *s;
BlockDriverState *replaced_bs;
if (granularity == 0) {
granularity = bdrv_get_default_bitmap_granularity(target);
@@ -728,6 +743,21 @@ static void mirror_start_job(BlockDriverState *bs, BlockDriverState *target,
buf_size = DEFAULT_MIRROR_BUF_SIZE;
}
/* We can't support this case as long as the block layer can't handle
* multiple BlockBackends per BlockDriverState. */
if (replaces) {
replaced_bs = bdrv_lookup_bs(replaces, replaces, errp);
if (replaced_bs == NULL) {
return;
}
} else {
replaced_bs = bs;
}
if (replaced_bs->blk && target->blk) {
error_setg(errp, "Can't create node with two BlockBackends");
return;
}
s = block_job_create(driver, bs, speed, cb, opaque, errp);
if (!s) {
return;

View File

@@ -342,13 +342,13 @@ static void nbd_attach_aio_context(BlockDriverState *bs,
nbd_client_attach_aio_context(bs, new_context);
}
static void nbd_refresh_filename(BlockDriverState *bs)
static void nbd_refresh_filename(BlockDriverState *bs, QDict *options)
{
QDict *opts = qdict_new();
const char *path = qdict_get_try_str(bs->options, "path");
const char *host = qdict_get_try_str(bs->options, "host");
const char *port = qdict_get_try_str(bs->options, "port");
const char *export = qdict_get_try_str(bs->options, "export");
const char *path = qdict_get_try_str(options, "path");
const char *host = qdict_get_try_str(options, "host");
const char *port = qdict_get_try_str(options, "port");
const char *export = qdict_get_try_str(options, "export");
qdict_put_obj(opts, "driver", QOBJECT(qstring_from_str("nbd")));

View File

@@ -61,7 +61,7 @@ typedef struct ParallelsHeader {
typedef enum ParallelsPreallocMode {
PRL_PREALLOC_MODE_FALLOCATE = 0,
PRL_PREALLOC_MODE_TRUNCATE = 1,
PRL_PREALLOC_MODE_MAX = 2,
PRL_PREALLOC_MODE__MAX = 2,
} ParallelsPreallocMode;
static const char *prealloc_mode_lookup[] = {
@@ -660,7 +660,7 @@ static int parallels_open(BlockDriverState *bs, QDict *options, int flags,
s->prealloc_size = MAX(s->tracks, s->prealloc_size >> BDRV_SECTOR_BITS);
buf = qemu_opt_get_del(opts, PARALLELS_OPT_PREALLOC_MODE);
s->prealloc_mode = qapi_enum_parse(prealloc_mode_lookup, buf,
PRL_PREALLOC_MODE_MAX, PRL_PREALLOC_MODE_FALLOCATE, &local_err);
PRL_PREALLOC_MODE__MAX, PRL_PREALLOC_MODE_FALLOCATE, &local_err);
g_free(buf);
if (local_err != NULL) {
goto fail_options;

View File

@@ -245,15 +245,18 @@ void bdrv_query_image_info(BlockDriverState *bs,
info->has_backing_filename = true;
bdrv_get_full_backing_filename(bs, backing_filename2, PATH_MAX, &err);
if (err) {
error_propagate(errp, err);
qapi_free_ImageInfo(info);
/* Can't reconstruct the full backing filename, so we must omit
* this field and apply a Best Effort to this query. */
g_free(backing_filename2);
return;
backing_filename2 = NULL;
error_free(err);
err = NULL;
}
if (strcmp(backing_filename, backing_filename2) != 0) {
info->full_backing_filename =
g_strdup(backing_filename2);
/* Always report the full_backing_filename if present, even if it's the
* same as backing_filename. That they are same is useful info. */
if (backing_filename2) {
info->full_backing_filename = g_strdup(backing_filename2);
info->has_full_backing_filename = true;
}
@@ -588,7 +591,7 @@ static void dump_qlist(fprintf_function func_fprintf, void *f, int indentation,
int i = 0;
for (entry = qlist_first(list); entry; entry = qlist_next(entry), i++) {
qtype_code type = qobject_type(entry->value);
QType type = qobject_type(entry->value);
bool composite = (type == QTYPE_QDICT || type == QTYPE_QLIST);
const char *format = composite ? "%*s[%i]:\n" : "%*s[%i]: ";
@@ -606,7 +609,7 @@ static void dump_qdict(fprintf_function func_fprintf, void *f, int indentation,
const QDictEntry *entry;
for (entry = qdict_first(dict); entry; entry = qdict_next(dict, entry)) {
qtype_code type = qobject_type(entry->value);
QType type = qobject_type(entry->value);
bool composite = (type == QTYPE_QDICT || type == QTYPE_QLIST);
const char *format = composite ? "%*s%s:\n" : "%*s%s: ";
char key[strlen(entry->key) + 1];
@@ -676,7 +679,10 @@ void bdrv_image_info_dump(fprintf_function func_fprintf, void *f,
if (info->has_backing_filename) {
func_fprintf(f, "backing file: %s", info->backing_filename);
if (info->has_full_backing_filename) {
if (!info->has_full_backing_filename) {
func_fprintf(f, " (cannot determine actual path)");
} else if (strcmp(info->backing_filename,
info->full_backing_filename) != 0) {
func_fprintf(f, " (actual path: %s)", info->full_backing_filename);
}
func_fprintf(f, "\n");

View File

@@ -1641,7 +1641,8 @@ fail:
static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
int l1_size, int64_t *visited_l1_entries,
int64_t l1_entries,
BlockDriverAmendStatusCB *status_cb)
BlockDriverAmendStatusCB *status_cb,
void *cb_opaque)
{
BDRVQcow2State *s = bs->opaque;
bool is_active_l1 = (l1_table == s->l1_table);
@@ -1667,7 +1668,7 @@ static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
/* unallocated */
(*visited_l1_entries)++;
if (status_cb) {
status_cb(bs, *visited_l1_entries, l1_entries);
status_cb(bs, *visited_l1_entries, l1_entries, cb_opaque);
}
continue;
}
@@ -1804,7 +1805,7 @@ static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
(*visited_l1_entries)++;
if (status_cb) {
status_cb(bs, *visited_l1_entries, l1_entries);
status_cb(bs, *visited_l1_entries, l1_entries, cb_opaque);
}
}
@@ -1828,7 +1829,8 @@ fail:
* qcow2 version which doesn't yet support metadata zero clusters.
*/
int qcow2_expand_zero_clusters(BlockDriverState *bs,
BlockDriverAmendStatusCB *status_cb)
BlockDriverAmendStatusCB *status_cb,
void *cb_opaque)
{
BDRVQcow2State *s = bs->opaque;
uint64_t *l1_table = NULL;
@@ -1845,7 +1847,7 @@ int qcow2_expand_zero_clusters(BlockDriverState *bs,
ret = expand_zero_clusters_in_l1(bs, s->l1_table, s->l1_size,
&visited_l1_entries, l1_entries,
status_cb);
status_cb, cb_opaque);
if (ret < 0) {
goto fail;
}
@@ -1881,7 +1883,7 @@ int qcow2_expand_zero_clusters(BlockDriverState *bs,
ret = expand_zero_clusters_in_l1(bs, l1_table, s->snapshots[i].l1_size,
&visited_l1_entries, l1_entries,
status_cb);
status_cb, cb_opaque);
if (ret < 0) {
goto fail;
}

View File

@@ -1345,6 +1345,9 @@ static int inc_refcounts(BlockDriverState *bs,
if (refcount == s->refcount_max) {
fprintf(stderr, "ERROR: overflow cluster offset=0x%" PRIx64
"\n", cluster_offset);
fprintf(stderr, "Use qemu-img amend to increase the refcount entry "
"width or qemu-img convert to create a clean copy if the "
"image cannot be opened for writing\n");
res->corruptions++;
continue;
}
@@ -2467,3 +2470,450 @@ int qcow2_pre_write_overlap_check(BlockDriverState *bs, int ign, int64_t offset,
return 0;
}
/* A pointer to a function of this type is given to walk_over_reftable(). That
* function will create refblocks and pass them to a RefblockFinishOp once they
* are completed (@refblock). @refblock_empty is set if the refblock is
* completely empty.
*
* Along with the refblock, a corresponding reftable entry is passed, in the
* reftable @reftable (which may be reallocated) at @reftable_index.
*
* @allocated should be set to true if a new cluster has been allocated.
*/
typedef int (RefblockFinishOp)(BlockDriverState *bs, uint64_t **reftable,
uint64_t reftable_index, uint64_t *reftable_size,
void *refblock, bool refblock_empty,
bool *allocated, Error **errp);
/**
* This "operation" for walk_over_reftable() allocates the refblock on disk (if
* it is not empty) and inserts its offset into the new reftable. The size of
* this new reftable is increased as required.
*/
static int alloc_refblock(BlockDriverState *bs, uint64_t **reftable,
uint64_t reftable_index, uint64_t *reftable_size,
void *refblock, bool refblock_empty, bool *allocated,
Error **errp)
{
BDRVQcow2State *s = bs->opaque;
int64_t offset;
if (!refblock_empty && reftable_index >= *reftable_size) {
uint64_t *new_reftable;
uint64_t new_reftable_size;
new_reftable_size = ROUND_UP(reftable_index + 1,
s->cluster_size / sizeof(uint64_t));
if (new_reftable_size > QCOW_MAX_REFTABLE_SIZE / sizeof(uint64_t)) {
error_setg(errp,
"This operation would make the refcount table grow "
"beyond the maximum size supported by QEMU, aborting");
return -ENOTSUP;
}
new_reftable = g_try_realloc(*reftable, new_reftable_size *
sizeof(uint64_t));
if (!new_reftable) {
error_setg(errp, "Failed to increase reftable buffer size");
return -ENOMEM;
}
memset(new_reftable + *reftable_size, 0,
(new_reftable_size - *reftable_size) * sizeof(uint64_t));
*reftable = new_reftable;
*reftable_size = new_reftable_size;
}
if (!refblock_empty && !(*reftable)[reftable_index]) {
offset = qcow2_alloc_clusters(bs, s->cluster_size);
if (offset < 0) {
error_setg_errno(errp, -offset, "Failed to allocate refblock");
return offset;
}
(*reftable)[reftable_index] = offset;
*allocated = true;
}
return 0;
}
/**
* This "operation" for walk_over_reftable() writes the refblock to disk at the
* offset specified by the new reftable's entry. It does not modify the new
* reftable or change any refcounts.
*/
static int flush_refblock(BlockDriverState *bs, uint64_t **reftable,
uint64_t reftable_index, uint64_t *reftable_size,
void *refblock, bool refblock_empty, bool *allocated,
Error **errp)
{
BDRVQcow2State *s = bs->opaque;
int64_t offset;
int ret;
if (reftable_index < *reftable_size && (*reftable)[reftable_index]) {
offset = (*reftable)[reftable_index];
ret = qcow2_pre_write_overlap_check(bs, 0, offset, s->cluster_size);
if (ret < 0) {
error_setg_errno(errp, -ret, "Overlap check failed");
return ret;
}
ret = bdrv_pwrite(bs->file->bs, offset, refblock, s->cluster_size);
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to write refblock");
return ret;
}
} else {
assert(refblock_empty);
}
return 0;
}
/**
* This function walks over the existing reftable and every referenced refblock;
* if @new_set_refcount is non-NULL, it is called for every refcount entry to
* create an equal new entry in the passed @new_refblock. Once that
* @new_refblock is completely filled, @operation will be called.
*
* @status_cb and @cb_opaque are used for the amend operation's status callback.
* @index is the index of the walk_over_reftable() calls and @total is the total
* number of walk_over_reftable() calls per amend operation. Both are used for
* calculating the parameters for the status callback.
*
* @allocated is set to true if a new cluster has been allocated.
*/
static int walk_over_reftable(BlockDriverState *bs, uint64_t **new_reftable,
uint64_t *new_reftable_index,
uint64_t *new_reftable_size,
void *new_refblock, int new_refblock_size,
int new_refcount_bits,
RefblockFinishOp *operation, bool *allocated,
Qcow2SetRefcountFunc *new_set_refcount,
BlockDriverAmendStatusCB *status_cb,
void *cb_opaque, int index, int total,
Error **errp)
{
BDRVQcow2State *s = bs->opaque;
uint64_t reftable_index;
bool new_refblock_empty = true;
int refblock_index;
int new_refblock_index = 0;
int ret;
for (reftable_index = 0; reftable_index < s->refcount_table_size;
reftable_index++)
{
uint64_t refblock_offset = s->refcount_table[reftable_index]
& REFT_OFFSET_MASK;
status_cb(bs, (uint64_t)index * s->refcount_table_size + reftable_index,
(uint64_t)total * s->refcount_table_size, cb_opaque);
if (refblock_offset) {
void *refblock;
if (offset_into_cluster(s, refblock_offset)) {
qcow2_signal_corruption(bs, true, -1, -1, "Refblock offset %#"
PRIx64 " unaligned (reftable index: %#"
PRIx64 ")", refblock_offset,
reftable_index);
error_setg(errp,
"Image is corrupt (unaligned refblock offset)");
return -EIO;
}
ret = qcow2_cache_get(bs, s->refcount_block_cache, refblock_offset,
&refblock);
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to retrieve refblock");
return ret;
}
for (refblock_index = 0; refblock_index < s->refcount_block_size;
refblock_index++)
{
uint64_t refcount;
if (new_refblock_index >= new_refblock_size) {
/* new_refblock is now complete */
ret = operation(bs, new_reftable, *new_reftable_index,
new_reftable_size, new_refblock,
new_refblock_empty, allocated, errp);
if (ret < 0) {
qcow2_cache_put(bs, s->refcount_block_cache, &refblock);
return ret;
}
(*new_reftable_index)++;
new_refblock_index = 0;
new_refblock_empty = true;
}
refcount = s->get_refcount(refblock, refblock_index);
if (new_refcount_bits < 64 && refcount >> new_refcount_bits) {
uint64_t offset;
qcow2_cache_put(bs, s->refcount_block_cache, &refblock);
offset = ((reftable_index << s->refcount_block_bits)
+ refblock_index) << s->cluster_bits;
error_setg(errp, "Cannot decrease refcount entry width to "
"%i bits: Cluster at offset %#" PRIx64 " has a "
"refcount of %" PRIu64, new_refcount_bits,
offset, refcount);
return -EINVAL;
}
if (new_set_refcount) {
new_set_refcount(new_refblock, new_refblock_index++,
refcount);
} else {
new_refblock_index++;
}
new_refblock_empty = new_refblock_empty && refcount == 0;
}
qcow2_cache_put(bs, s->refcount_block_cache, &refblock);
} else {
/* No refblock means every refcount is 0 */
for (refblock_index = 0; refblock_index < s->refcount_block_size;
refblock_index++)
{
if (new_refblock_index >= new_refblock_size) {
/* new_refblock is now complete */
ret = operation(bs, new_reftable, *new_reftable_index,
new_reftable_size, new_refblock,
new_refblock_empty, allocated, errp);
if (ret < 0) {
return ret;
}
(*new_reftable_index)++;
new_refblock_index = 0;
new_refblock_empty = true;
}
if (new_set_refcount) {
new_set_refcount(new_refblock, new_refblock_index++, 0);
} else {
new_refblock_index++;
}
}
}
}
if (new_refblock_index > 0) {
/* Complete the potentially existing partially filled final refblock */
if (new_set_refcount) {
for (; new_refblock_index < new_refblock_size;
new_refblock_index++)
{
new_set_refcount(new_refblock, new_refblock_index, 0);
}
}
ret = operation(bs, new_reftable, *new_reftable_index,
new_reftable_size, new_refblock, new_refblock_empty,
allocated, errp);
if (ret < 0) {
return ret;
}
(*new_reftable_index)++;
}
status_cb(bs, (uint64_t)(index + 1) * s->refcount_table_size,
(uint64_t)total * s->refcount_table_size, cb_opaque);
return 0;
}
int qcow2_change_refcount_order(BlockDriverState *bs, int refcount_order,
BlockDriverAmendStatusCB *status_cb,
void *cb_opaque, Error **errp)
{
BDRVQcow2State *s = bs->opaque;
Qcow2GetRefcountFunc *new_get_refcount;
Qcow2SetRefcountFunc *new_set_refcount;
void *new_refblock = qemu_blockalign(bs->file->bs, s->cluster_size);
uint64_t *new_reftable = NULL, new_reftable_size = 0;
uint64_t *old_reftable, old_reftable_size, old_reftable_offset;
uint64_t new_reftable_index = 0;
uint64_t i;
int64_t new_reftable_offset = 0, allocated_reftable_size = 0;
int new_refblock_size, new_refcount_bits = 1 << refcount_order;
int old_refcount_order;
int walk_index = 0;
int ret;
bool new_allocation;
assert(s->qcow_version >= 3);
assert(refcount_order >= 0 && refcount_order <= 6);
/* see qcow2_open() */
new_refblock_size = 1 << (s->cluster_bits - (refcount_order - 3));
new_get_refcount = get_refcount_funcs[refcount_order];
new_set_refcount = set_refcount_funcs[refcount_order];
do {
int total_walks;
new_allocation = false;
/* At least we have to do this walk and the one which writes the
* refblocks; also, at least we have to do this loop here at least
* twice (normally), first to do the allocations, and second to
* determine that everything is correctly allocated, this then makes
* three walks in total */
total_walks = MAX(walk_index + 2, 3);
/* First, allocate the structures so they are present in the refcount
* structures */
ret = walk_over_reftable(bs, &new_reftable, &new_reftable_index,
&new_reftable_size, NULL, new_refblock_size,
new_refcount_bits, &alloc_refblock,
&new_allocation, NULL, status_cb, cb_opaque,
walk_index++, total_walks, errp);
if (ret < 0) {
goto done;
}
new_reftable_index = 0;
if (new_allocation) {
if (new_reftable_offset) {
qcow2_free_clusters(bs, new_reftable_offset,
allocated_reftable_size * sizeof(uint64_t),
QCOW2_DISCARD_NEVER);
}
new_reftable_offset = qcow2_alloc_clusters(bs, new_reftable_size *
sizeof(uint64_t));
if (new_reftable_offset < 0) {
error_setg_errno(errp, -new_reftable_offset,
"Failed to allocate the new reftable");
ret = new_reftable_offset;
goto done;
}
allocated_reftable_size = new_reftable_size;
}
} while (new_allocation);
/* Second, write the new refblocks */
ret = walk_over_reftable(bs, &new_reftable, &new_reftable_index,
&new_reftable_size, new_refblock,
new_refblock_size, new_refcount_bits,
&flush_refblock, &new_allocation, new_set_refcount,
status_cb, cb_opaque, walk_index, walk_index + 1,
errp);
if (ret < 0) {
goto done;
}
assert(!new_allocation);
/* Write the new reftable */
ret = qcow2_pre_write_overlap_check(bs, 0, new_reftable_offset,
new_reftable_size * sizeof(uint64_t));
if (ret < 0) {
error_setg_errno(errp, -ret, "Overlap check failed");
goto done;
}
for (i = 0; i < new_reftable_size; i++) {
cpu_to_be64s(&new_reftable[i]);
}
ret = bdrv_pwrite(bs->file->bs, new_reftable_offset, new_reftable,
new_reftable_size * sizeof(uint64_t));
for (i = 0; i < new_reftable_size; i++) {
be64_to_cpus(&new_reftable[i]);
}
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to write the new reftable");
goto done;
}
/* Empty the refcount cache */
ret = qcow2_cache_flush(bs, s->refcount_block_cache);
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to flush the refblock cache");
goto done;
}
/* Update the image header to point to the new reftable; this only updates
* the fields which are relevant to qcow2_update_header(); other fields
* such as s->refcount_table or s->refcount_bits stay stale for now
* (because we have to restore everything if qcow2_update_header() fails) */
old_refcount_order = s->refcount_order;
old_reftable_size = s->refcount_table_size;
old_reftable_offset = s->refcount_table_offset;
s->refcount_order = refcount_order;
s->refcount_table_size = new_reftable_size;
s->refcount_table_offset = new_reftable_offset;
ret = qcow2_update_header(bs);
if (ret < 0) {
s->refcount_order = old_refcount_order;
s->refcount_table_size = old_reftable_size;
s->refcount_table_offset = old_reftable_offset;
error_setg_errno(errp, -ret, "Failed to update the qcow2 header");
goto done;
}
/* Now update the rest of the in-memory information */
old_reftable = s->refcount_table;
s->refcount_table = new_reftable;
s->refcount_bits = 1 << refcount_order;
s->refcount_max = UINT64_C(1) << (s->refcount_bits - 1);
s->refcount_max += s->refcount_max - 1;
s->refcount_block_bits = s->cluster_bits - (refcount_order - 3);
s->refcount_block_size = 1 << s->refcount_block_bits;
s->get_refcount = new_get_refcount;
s->set_refcount = new_set_refcount;
/* For cleaning up all old refblocks and the old reftable below the "done"
* label */
new_reftable = old_reftable;
new_reftable_size = old_reftable_size;
new_reftable_offset = old_reftable_offset;
done:
if (new_reftable) {
/* On success, new_reftable actually points to the old reftable (and
* new_reftable_size is the old reftable's size); but that is just
* fine */
for (i = 0; i < new_reftable_size; i++) {
uint64_t offset = new_reftable[i] & REFT_OFFSET_MASK;
if (offset) {
qcow2_free_clusters(bs, offset, s->cluster_size,
QCOW2_DISCARD_OTHER);
}
}
g_free(new_reftable);
if (new_reftable_offset > 0) {
qcow2_free_clusters(bs, new_reftable_offset,
new_reftable_size * sizeof(uint64_t),
QCOW2_DISCARD_OTHER);
}
}
qemu_vfree(new_refblock);
return ret;
}

View File

@@ -1282,6 +1282,52 @@ static void qcow2_reopen_abort(BDRVReopenState *state)
g_free(state->opaque);
}
static void qcow2_join_options(QDict *options, QDict *old_options)
{
bool has_new_overlap_template =
qdict_haskey(options, QCOW2_OPT_OVERLAP) ||
qdict_haskey(options, QCOW2_OPT_OVERLAP_TEMPLATE);
bool has_new_total_cache_size =
qdict_haskey(options, QCOW2_OPT_CACHE_SIZE);
bool has_all_cache_options;
/* New overlap template overrides all old overlap options */
if (has_new_overlap_template) {
qdict_del(old_options, QCOW2_OPT_OVERLAP);
qdict_del(old_options, QCOW2_OPT_OVERLAP_TEMPLATE);
qdict_del(old_options, QCOW2_OPT_OVERLAP_MAIN_HEADER);
qdict_del(old_options, QCOW2_OPT_OVERLAP_ACTIVE_L1);
qdict_del(old_options, QCOW2_OPT_OVERLAP_ACTIVE_L2);
qdict_del(old_options, QCOW2_OPT_OVERLAP_REFCOUNT_TABLE);
qdict_del(old_options, QCOW2_OPT_OVERLAP_REFCOUNT_BLOCK);
qdict_del(old_options, QCOW2_OPT_OVERLAP_SNAPSHOT_TABLE);
qdict_del(old_options, QCOW2_OPT_OVERLAP_INACTIVE_L1);
qdict_del(old_options, QCOW2_OPT_OVERLAP_INACTIVE_L2);
}
/* New total cache size overrides all old options */
if (qdict_haskey(options, QCOW2_OPT_CACHE_SIZE)) {
qdict_del(old_options, QCOW2_OPT_L2_CACHE_SIZE);
qdict_del(old_options, QCOW2_OPT_REFCOUNT_CACHE_SIZE);
}
qdict_join(options, old_options, false);
/*
* If after merging all cache size options are set, an old total size is
* overwritten. Do keep all options, however, if all three are new. The
* resulting error message is what we want to happen.
*/
has_all_cache_options =
qdict_haskey(options, QCOW2_OPT_CACHE_SIZE) ||
qdict_haskey(options, QCOW2_OPT_L2_CACHE_SIZE) ||
qdict_haskey(options, QCOW2_OPT_REFCOUNT_CACHE_SIZE);
if (has_all_cache_options && !has_new_total_cache_size) {
qdict_del(options, QCOW2_OPT_CACHE_SIZE);
}
}
static int64_t coroutine_fn qcow2_co_get_block_status(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, int *pnum)
{
@@ -1716,9 +1762,8 @@ static void qcow2_invalidate_cache(BlockDriverState *bs, Error **errp)
ret = qcow2_open(bs, options, flags, &local_err);
QDECREF(options);
if (local_err) {
error_setg(errp, "Could not reopen qcow2 layer: %s",
error_get_pretty(local_err));
error_free(local_err);
error_propagate(errp, local_err);
error_prepend(errp, "Could not reopen qcow2 layer: ");
return;
} else if (ret < 0) {
error_setg_errno(errp, -ret, "Could not reopen qcow2 layer");
@@ -2269,7 +2314,7 @@ static int qcow2_create(const char *filename, QemuOpts *opts, Error **errp)
DEFAULT_CLUSTER_SIZE);
buf = qemu_opt_get_del(opts, BLOCK_OPT_PREALLOC);
prealloc = qapi_enum_parse(PreallocMode_lookup, buf,
PREALLOC_MODE_MAX, PREALLOC_MODE_OFF,
PREALLOC_MODE__MAX, PREALLOC_MODE_OFF,
&local_err);
if (local_err) {
error_propagate(errp, local_err);
@@ -2757,6 +2802,10 @@ static ImageInfoSpecific *qcow2_get_specific_info(BlockDriverState *bs)
.has_corrupt = true,
.refcount_bits = s->refcount_bits,
};
} else {
/* if this assertion fails, this probably means a new version was
* added without having it covered here */
assert(false);
}
return spec_info;
@@ -2824,7 +2873,7 @@ static int qcow2_load_vmstate(BlockDriverState *bs, uint8_t *buf,
* have to be removed.
*/
static int qcow2_downgrade(BlockDriverState *bs, int target_version,
BlockDriverAmendStatusCB *status_cb)
BlockDriverAmendStatusCB *status_cb, void *cb_opaque)
{
BDRVQcow2State *s = bs->opaque;
int current_version = s->qcow_version;
@@ -2839,13 +2888,7 @@ static int qcow2_downgrade(BlockDriverState *bs, int target_version,
}
if (s->refcount_order != 4) {
/* we would have to convert the image to a refcount_order == 4 image
* here; however, since qemu (at the time of writing this) does not
* support anything different than 4 anyway, there is no point in doing
* so right now; however, we should error out (if qemu supports this in
* the future and this code has not been adapted) */
error_report("qcow2_downgrade: Image refcount orders other than 4 are "
"currently not supported.");
error_report("compat=0.10 requires refcount_bits=16");
return -ENOTSUP;
}
@@ -2873,7 +2916,7 @@ static int qcow2_downgrade(BlockDriverState *bs, int target_version,
/* clearing autoclear features is trivial */
s->autoclear_features = 0;
ret = qcow2_expand_zero_clusters(bs, status_cb);
ret = qcow2_expand_zero_clusters(bs, status_cb, cb_opaque);
if (ret < 0) {
return ret;
}
@@ -2887,8 +2930,79 @@ static int qcow2_downgrade(BlockDriverState *bs, int target_version,
return 0;
}
typedef enum Qcow2AmendOperation {
/* This is the value Qcow2AmendHelperCBInfo::last_operation will be
* statically initialized to so that the helper CB can discern the first
* invocation from an operation change */
QCOW2_NO_OPERATION = 0,
QCOW2_CHANGING_REFCOUNT_ORDER,
QCOW2_DOWNGRADING,
} Qcow2AmendOperation;
typedef struct Qcow2AmendHelperCBInfo {
/* The code coordinating the amend operations should only modify
* these four fields; the rest will be managed by the CB */
BlockDriverAmendStatusCB *original_status_cb;
void *original_cb_opaque;
Qcow2AmendOperation current_operation;
/* Total number of operations to perform (only set once) */
int total_operations;
/* The following fields are managed by the CB */
/* Number of operations completed */
int operations_completed;
/* Cumulative offset of all completed operations */
int64_t offset_completed;
Qcow2AmendOperation last_operation;
int64_t last_work_size;
} Qcow2AmendHelperCBInfo;
static void qcow2_amend_helper_cb(BlockDriverState *bs,
int64_t operation_offset,
int64_t operation_work_size, void *opaque)
{
Qcow2AmendHelperCBInfo *info = opaque;
int64_t current_work_size;
int64_t projected_work_size;
if (info->current_operation != info->last_operation) {
if (info->last_operation != QCOW2_NO_OPERATION) {
info->offset_completed += info->last_work_size;
info->operations_completed++;
}
info->last_operation = info->current_operation;
}
assert(info->total_operations > 0);
assert(info->operations_completed < info->total_operations);
info->last_work_size = operation_work_size;
current_work_size = info->offset_completed + operation_work_size;
/* current_work_size is the total work size for (operations_completed + 1)
* operations (which includes this one), so multiply it by the number of
* operations not covered and divide it by the number of operations
* covered to get a projection for the operations not covered */
projected_work_size = current_work_size * (info->total_operations -
info->operations_completed - 1)
/ (info->operations_completed + 1);
info->original_status_cb(bs, info->offset_completed + operation_offset,
current_work_size + projected_work_size,
info->original_cb_opaque);
}
static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
BlockDriverAmendStatusCB *status_cb)
BlockDriverAmendStatusCB *status_cb,
void *cb_opaque)
{
BDRVQcow2State *s = bs->opaque;
int old_version = s->qcow_version, new_version = old_version;
@@ -2898,8 +3012,10 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
const char *compat = NULL;
uint64_t cluster_size = s->cluster_size;
bool encrypt;
int refcount_bits = s->refcount_bits;
int ret;
QemuOptDesc *desc = opts->list->desc;
Qcow2AmendHelperCBInfo helper_cb_info;
while (desc && desc->name) {
if (!qemu_opt_find(opts, desc->name)) {
@@ -2917,11 +3033,11 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
} else if (!strcmp(compat, "1.1")) {
new_version = 3;
} else {
fprintf(stderr, "Unknown compatibility level %s.\n", compat);
error_report("Unknown compatibility level %s", compat);
return -EINVAL;
}
} else if (!strcmp(desc->name, BLOCK_OPT_PREALLOC)) {
fprintf(stderr, "Cannot change preallocation mode.\n");
error_report("Cannot change preallocation mode");
return -ENOTSUP;
} else if (!strcmp(desc->name, BLOCK_OPT_SIZE)) {
new_size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0);
@@ -2934,47 +3050,74 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
!!s->cipher);
if (encrypt != !!s->cipher) {
fprintf(stderr, "Changing the encryption flag is not "
"supported.\n");
error_report("Changing the encryption flag is not supported");
return -ENOTSUP;
}
} else if (!strcmp(desc->name, BLOCK_OPT_CLUSTER_SIZE)) {
cluster_size = qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE,
cluster_size);
if (cluster_size != s->cluster_size) {
fprintf(stderr, "Changing the cluster size is not "
"supported.\n");
error_report("Changing the cluster size is not supported");
return -ENOTSUP;
}
} else if (!strcmp(desc->name, BLOCK_OPT_LAZY_REFCOUNTS)) {
lazy_refcounts = qemu_opt_get_bool(opts, BLOCK_OPT_LAZY_REFCOUNTS,
lazy_refcounts);
} else if (!strcmp(desc->name, BLOCK_OPT_REFCOUNT_BITS)) {
error_report("Cannot change refcount entry width");
return -ENOTSUP;
refcount_bits = qemu_opt_get_number(opts, BLOCK_OPT_REFCOUNT_BITS,
refcount_bits);
if (refcount_bits <= 0 || refcount_bits > 64 ||
!is_power_of_2(refcount_bits))
{
error_report("Refcount width must be a power of two and may "
"not exceed 64 bits");
return -EINVAL;
}
} else {
/* if this assertion fails, this probably means a new option was
/* if this point is reached, this probably means a new option was
* added without having it covered here */
assert(false);
abort();
}
desc++;
}
if (new_version != old_version) {
if (new_version > old_version) {
/* Upgrade */
s->qcow_version = new_version;
ret = qcow2_update_header(bs);
if (ret < 0) {
s->qcow_version = old_version;
return ret;
}
} else {
ret = qcow2_downgrade(bs, new_version, status_cb);
if (ret < 0) {
return ret;
}
helper_cb_info = (Qcow2AmendHelperCBInfo){
.original_status_cb = status_cb,
.original_cb_opaque = cb_opaque,
.total_operations = (new_version < old_version)
+ (s->refcount_bits != refcount_bits)
};
/* Upgrade first (some features may require compat=1.1) */
if (new_version > old_version) {
s->qcow_version = new_version;
ret = qcow2_update_header(bs);
if (ret < 0) {
s->qcow_version = old_version;
return ret;
}
}
if (s->refcount_bits != refcount_bits) {
int refcount_order = ctz32(refcount_bits);
Error *local_error = NULL;
if (new_version < 3 && refcount_bits != 16) {
error_report("Different refcount widths than 16 bits require "
"compatibility level 1.1 or above (use compat=1.1 or "
"greater)");
return -EINVAL;
}
helper_cb_info.current_operation = QCOW2_CHANGING_REFCOUNT_ORDER;
ret = qcow2_change_refcount_order(bs, refcount_order,
&qcow2_amend_helper_cb,
&helper_cb_info, &local_error);
if (ret < 0) {
error_report_err(local_error);
return ret;
}
}
@@ -2989,9 +3132,9 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
if (s->use_lazy_refcounts != lazy_refcounts) {
if (lazy_refcounts) {
if (s->qcow_version < 3) {
fprintf(stderr, "Lazy refcounts only supported with compatibility "
"level 1.1 and above (use compat=1.1 or greater)\n");
if (new_version < 3) {
error_report("Lazy refcounts only supported with compatibility "
"level 1.1 and above (use compat=1.1 or greater)");
return -EINVAL;
}
s->compatible_features |= QCOW2_COMPAT_LAZY_REFCOUNTS;
@@ -3025,6 +3168,16 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
}
}
/* Downgrade last (so unsupported features can be removed before) */
if (new_version < old_version) {
helper_cb_info.current_operation = QCOW2_DOWNGRADING;
ret = qcow2_downgrade(bs, new_version, &qcow2_amend_helper_cb,
&helper_cb_info);
if (ret < 0) {
return ret;
}
}
return 0;
}
@@ -3145,6 +3298,7 @@ BlockDriver bdrv_qcow2 = {
.bdrv_reopen_prepare = qcow2_reopen_prepare,
.bdrv_reopen_commit = qcow2_reopen_commit,
.bdrv_reopen_abort = qcow2_reopen_abort,
.bdrv_join_options = qcow2_join_options,
.bdrv_create = qcow2_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
.bdrv_co_get_block_status = qcow2_co_get_block_status,

View File

@@ -529,6 +529,10 @@ int qcow2_check_metadata_overlap(BlockDriverState *bs, int ign, int64_t offset,
int qcow2_pre_write_overlap_check(BlockDriverState *bs, int ign, int64_t offset,
int64_t size);
int qcow2_change_refcount_order(BlockDriverState *bs, int refcount_order,
BlockDriverAmendStatusCB *status_cb,
void *cb_opaque, Error **errp);
/* qcow2-cluster.c functions */
int qcow2_grow_l1_table(BlockDriverState *bs, uint64_t min_size,
bool exact_size);
@@ -553,7 +557,8 @@ int qcow2_discard_clusters(BlockDriverState *bs, uint64_t offset,
int qcow2_zero_clusters(BlockDriverState *bs, uint64_t offset, int nb_sectors);
int qcow2_expand_zero_clusters(BlockDriverState *bs,
BlockDriverAmendStatusCB *status_cb);
BlockDriverAmendStatusCB *status_cb,
void *cb_opaque);
/* qcow2-snapshot.c functions */
int qcow2_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info);

View File

@@ -1611,9 +1611,8 @@ static void bdrv_qed_invalidate_cache(BlockDriverState *bs, Error **errp)
memset(s, 0, sizeof(BDRVQEDState));
ret = bdrv_qed_open(bs, NULL, bs->open_flags, &local_err);
if (local_err) {
error_setg(errp, "Could not reopen qed layer: %s",
error_get_pretty(local_err));
error_free(local_err);
error_propagate(errp, local_err);
error_prepend(errp, "Could not reopen qed layer: ");
return;
} else if (ret < 0) {
error_setg_errno(errp, -ret, "Could not reopen qed layer");

View File

@@ -847,7 +847,7 @@ static int parse_read_pattern(const char *opt)
return QUORUM_READ_PATTERN_QUORUM;
}
for (i = 0; i < QUORUM_READ_PATTERN_MAX; i++) {
for (i = 0; i < QUORUM_READ_PATTERN__MAX; i++) {
if (!strcmp(opt, QuorumReadPattern_lookup[i])) {
return i;
}
@@ -997,7 +997,7 @@ static void quorum_attach_aio_context(BlockDriverState *bs,
}
}
static void quorum_refresh_filename(BlockDriverState *bs)
static void quorum_refresh_filename(BlockDriverState *bs, QDict *options)
{
BDRVQuorumState *s = bs->opaque;
QDict *opts;

View File

@@ -500,21 +500,17 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
goto fail;
}
if (!s->use_aio && (bdrv_flags & BDRV_O_NATIVE_AIO)) {
error_printf("WARNING: aio=native was specified for '%s', but "
"it requires cache.direct=on, which was not "
"specified. Falling back to aio=threads.\n"
" This will become an error condition in "
"future QEMU versions.\n",
bs->filename);
error_setg(errp, "aio=native was specified, but it requires "
"cache.direct=on, which was not specified.");
ret = -EINVAL;
goto fail;
}
#else
if (bdrv_flags & BDRV_O_NATIVE_AIO) {
error_printf("WARNING: aio=native was specified for '%s', but "
"is not supported in this build. Falling back to "
"aio=threads.\n"
" This will become an error condition in "
"future QEMU versions.\n",
bs->filename);
error_setg(errp, "aio=native was specified, but is not supported "
"in this build.");
ret = -EINVAL;
goto fail;
}
#endif /* !defined(CONFIG_LINUX_AIO) */
@@ -1636,7 +1632,7 @@ static int raw_create(const char *filename, QemuOpts *opts, Error **errp)
nocow = qemu_opt_get_bool(opts, BLOCK_OPT_NOCOW, false);
buf = qemu_opt_get_del(opts, BLOCK_OPT_PREALLOC);
prealloc = qapi_enum_parse(PreallocMode_lookup, buf,
PREALLOC_MODE_MAX, PREALLOC_MODE_OFF,
PREALLOC_MODE__MAX, PREALLOC_MODE_OFF,
&local_err);
g_free(buf);
if (local_err) {

View File

@@ -1861,8 +1861,7 @@ static int sd_create(const char *filename, QemuOpts *opts,
fd = connect_to_sdog(s, &local_err);
if (fd < 0) {
error_report("%s", error_get_pretty(local_err));
error_free(local_err);
error_report_err(local_err);
ret = -EIO;
goto out;
}
@@ -2406,9 +2405,8 @@ static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info)
ret = do_sd_create(s, &new_vid, 1, &local_err);
if (ret < 0) {
error_report("failed to create inode for snapshot: %s",
error_get_pretty(local_err));
error_free(local_err);
error_reportf_err(local_err,
"failed to create inode for snapshot: ");
goto cleanup;
}

View File

@@ -229,6 +229,8 @@ int bdrv_snapshot_delete(BlockDriverState *bs,
Error **errp)
{
BlockDriver *drv = bs->drv;
int ret;
if (!drv) {
error_setg(errp, QERR_DEVICE_HAS_NO_MEDIUM, bdrv_get_device_name(bs));
return -ENOMEDIUM;
@@ -239,18 +241,21 @@ int bdrv_snapshot_delete(BlockDriverState *bs,
}
/* drain all pending i/o before deleting snapshot */
bdrv_drain(bs);
bdrv_drained_begin(bs);
if (drv->bdrv_snapshot_delete) {
return drv->bdrv_snapshot_delete(bs, snapshot_id, name, errp);
ret = drv->bdrv_snapshot_delete(bs, snapshot_id, name, errp);
} else if (bs->file) {
ret = bdrv_snapshot_delete(bs->file->bs, snapshot_id, name, errp);
} else {
error_setg(errp, "Block format '%s' used by device '%s' "
"does not support internal snapshot deletion",
drv->format_name, bdrv_get_device_name(bs));
ret = -ENOTSUP;
}
if (bs->file) {
return bdrv_snapshot_delete(bs->file->bs, snapshot_id, name, errp);
}
error_setg(errp, "Block format '%s' used by device '%s' "
"does not support internal snapshot deletion",
drv->format_name, bdrv_get_device_name(bs));
return -ENOTSUP;
bdrv_drained_end(bs);
return ret;
}
int bdrv_snapshot_delete_by_id_or_name(BlockDriverState *bs,

View File

@@ -784,12 +784,13 @@ int vhdx_parse_log(BlockDriverState *bs, BDRVVHDXState *s, bool *flushed,
if (logs.valid) {
if (bs->read_only) {
ret = -EPERM;
error_setg_errno(errp, EPERM,
"VHDX image file '%s' opened read-only, but "
"contains a log that needs to be replayed. To "
"replay the log, execute:\n qemu-img check -r "
"all '%s'",
bs->filename, bs->filename);
error_setg(errp,
"VHDX image file '%s' opened read-only, but "
"contains a log that needs to be replayed",
bs->filename);
error_append_hint(errp, "To replay the log, run:\n"
"qemu-img check -r all '%s'\n",
bs->filename);
goto exit;
}
/* now flush the log */

View File

@@ -760,6 +760,17 @@ static int vmdk_open_sparse(BlockDriverState *bs, BdrvChild *file, int flags,
}
}
static const char *next_line(const char *s)
{
while (*s) {
if (*s == '\n') {
return s + 1;
}
s++;
}
return s;
}
static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
const char *desc_file_path, QDict *options,
Error **errp)
@@ -769,7 +780,7 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
char access[11];
char type[11];
char fname[512];
const char *p = desc;
const char *p, *np;
int64_t sectors = 0;
int64_t flat_offset;
char *extent_path;
@@ -779,7 +790,7 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
char extent_opt_prefix[32];
Error *local_err = NULL;
while (*p) {
for (p = desc; *p; p = next_line(p)) {
/* parse extent line in one of below formats:
*
* RW [size in sectors] FLAT "file-name.vmdk" OFFSET
@@ -791,29 +802,26 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
matches = sscanf(p, "%10s %" SCNd64 " %10s \"%511[^\n\r\"]\" %" SCNd64,
access, &sectors, type, fname, &flat_offset);
if (matches < 4 || strcmp(access, "RW")) {
goto next_line;
continue;
} else if (!strcmp(type, "FLAT")) {
if (matches != 5 || flat_offset < 0) {
error_setg(errp, "Invalid extent lines: \n%s", p);
return -EINVAL;
goto invalid;
}
} else if (!strcmp(type, "VMFS")) {
if (matches == 4) {
flat_offset = 0;
} else {
error_setg(errp, "Invalid extent lines:\n%s", p);
return -EINVAL;
goto invalid;
}
} else if (matches != 4) {
error_setg(errp, "Invalid extent lines:\n%s", p);
return -EINVAL;
goto invalid;
}
if (sectors <= 0 ||
(strcmp(type, "FLAT") && strcmp(type, "SPARSE") &&
strcmp(type, "VMFS") && strcmp(type, "VMFSSPARSE")) ||
(strcmp(access, "RW"))) {
goto next_line;
continue;
}
if (!path_is_absolute(fname) && !path_has_protocol(fname) &&
@@ -870,17 +878,17 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
return -ENOTSUP;
}
extent->type = g_strdup(type);
next_line:
/* move to next line */
while (*p) {
if (*p == '\n') {
p++;
break;
}
p++;
}
}
return 0;
invalid:
np = next_line(p);
assert(np != p);
if (np[-1] == '\n') {
np--;
}
error_setg(errp, "Invalid extent line: %.*s", (int)(np - p), p);
return -EINVAL;
}
static int vmdk_open_desc_file(BlockDriverState *bs, int flags, char *buf,
@@ -1494,8 +1502,8 @@ static int vmdk_write(BlockDriverState *bs, int64_t sector_num,
if (sector_num > bs->total_sectors) {
error_report("Wrong offset: sector_num=0x%" PRIx64
" total_sectors=0x%" PRIx64 "\n",
sector_num, bs->total_sectors);
" total_sectors=0x%" PRIx64,
sector_num, bs->total_sectors);
return -EIO;
}

View File

@@ -27,9 +27,8 @@ static void nbd_accept(void *opaque)
socklen_t addr_len = sizeof(addr);
int fd = accept(server_fd, (struct sockaddr *)&addr, &addr_len);
if (fd >= 0 && !nbd_client_new(NULL, fd, nbd_client_put)) {
shutdown(fd, 2);
close(fd);
if (fd >= 0) {
nbd_client_new(NULL, fd, nbd_client_put);
}
}

View File

@@ -387,16 +387,6 @@ static void extract_common_blockdev_options(QemuOpts *opts, int *bdrv_flags,
}
}
if (qemu_opt_get_bool(opts, BDRV_OPT_CACHE_WB, true)) {
*bdrv_flags |= BDRV_O_CACHE_WB;
}
if (qemu_opt_get_bool(opts, BDRV_OPT_CACHE_DIRECT, false)) {
*bdrv_flags |= BDRV_O_NOCACHE;
}
if (qemu_opt_get_bool(opts, BDRV_OPT_CACHE_NO_FLUSH, false)) {
*bdrv_flags |= BDRV_O_NO_FLUSH;
}
if ((aio = qemu_opt_get(opts, "aio")) != NULL) {
if (!strcmp(aio, "native")) {
*bdrv_flags |= BDRV_O_NATIVE_AIO;
@@ -454,7 +444,7 @@ static void extract_common_blockdev_options(QemuOpts *opts, int *bdrv_flags,
*detect_zeroes =
qapi_enum_parse(BlockdevDetectZeroesOptions_lookup,
qemu_opt_get(opts, "detect-zeroes"),
BLOCKDEV_DETECT_ZEROES_OPTIONS_MAX,
BLOCKDEV_DETECT_ZEROES_OPTIONS__MAX,
BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF,
&local_error);
if (local_error) {
@@ -490,7 +480,6 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
QDict *interval_dict = NULL;
QList *interval_list = NULL;
const char *id;
bool has_driver_specific_opts;
BlockdevDetectZeroesOptions detect_zeroes =
BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF;
const char *throttling_group = NULL;
@@ -514,8 +503,6 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
qdict_del(bs_opts, "id");
}
has_driver_specific_opts = !!qdict_size(bs_opts);
/* extract parameters */
snapshot = qemu_opt_get_bool(opts, "snapshot", 0);
@@ -572,13 +559,11 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
}
if (snapshot) {
/* always use cache=unsafe with snapshot */
bdrv_flags &= ~BDRV_O_CACHE_MASK;
bdrv_flags |= (BDRV_O_SNAPSHOT|BDRV_O_CACHE_WB|BDRV_O_NO_FLUSH);
bdrv_flags |= BDRV_O_SNAPSHOT;
}
/* init */
if ((!file || !*file) && !has_driver_specific_opts) {
if ((!file || !*file) && !qdict_size(bs_opts)) {
BlockBackendRootState *blk_rs;
blk = blk_new(qemu_opts_id(opts), errp);
@@ -606,6 +591,20 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
file = NULL;
}
/* bdrv_open() defaults to the values in bdrv_flags (for compatibility
* with other callers) rather than what we want as the real defaults.
* Apply the defaults here instead. */
qdict_set_default_str(bs_opts, BDRV_OPT_CACHE_WB, "on");
qdict_set_default_str(bs_opts, BDRV_OPT_CACHE_DIRECT, "off");
qdict_set_default_str(bs_opts, BDRV_OPT_CACHE_NO_FLUSH, "off");
if (snapshot) {
/* always use cache=unsafe with snapshot */
qdict_put(bs_opts, BDRV_OPT_CACHE_WB, qstring_from_str("on"));
qdict_put(bs_opts, BDRV_OPT_CACHE_DIRECT, qstring_from_str("off"));
qdict_put(bs_opts, BDRV_OPT_CACHE_NO_FLUSH, qstring_from_str("on"));
}
blk = blk_new_open(qemu_opts_id(opts), file, NULL, bs_opts, bdrv_flags,
errp);
if (!blk) {
@@ -1583,13 +1582,11 @@ static void internal_snapshot_abort(BlkActionState *common)
}
if (bdrv_snapshot_delete(bs, sn->id_str, sn->name, &local_error) < 0) {
error_report("Failed to delete snapshot with id '%s' and name '%s' on "
"device '%s' in abort: %s",
sn->id_str,
sn->name,
bdrv_get_device_name(bs),
error_get_pretty(local_error));
error_free(local_error);
error_reportf_err(local_error,
"Failed to delete snapshot with id '%s' and "
"name '%s' on device '%s' in abort: ",
sn->id_str, sn->name,
bdrv_get_device_name(bs));
}
}
@@ -3292,29 +3289,23 @@ void qmp_blockdev_backup(const char *device, const char *target,
NULL, errp);
}
void qmp_drive_mirror(const char *device, const char *target,
bool has_format, const char *format,
bool has_node_name, const char *node_name,
bool has_replaces, const char *replaces,
enum MirrorSyncMode sync,
bool has_mode, enum NewImageMode mode,
bool has_speed, int64_t speed,
bool has_granularity, uint32_t granularity,
bool has_buf_size, int64_t buf_size,
bool has_on_source_error, BlockdevOnError on_source_error,
bool has_on_target_error, BlockdevOnError on_target_error,
bool has_unmap, bool unmap,
Error **errp)
/* Parameter check and block job starting for drive mirroring.
* Caller should hold @device and @target's aio context (must be the same).
**/
static void blockdev_mirror_common(BlockDriverState *bs,
BlockDriverState *target,
bool has_replaces, const char *replaces,
enum MirrorSyncMode sync,
bool has_speed, int64_t speed,
bool has_granularity, uint32_t granularity,
bool has_buf_size, int64_t buf_size,
bool has_on_source_error,
BlockdevOnError on_source_error,
bool has_on_target_error,
BlockdevOnError on_target_error,
bool has_unmap, bool unmap,
Error **errp)
{
BlockBackend *blk;
BlockDriverState *bs;
BlockDriverState *source, *target_bs;
AioContext *aio_context;
Error *local_err = NULL;
QDict *options;
int flags;
int64_t size;
int ret;
if (!has_speed) {
speed = 0;
@@ -3325,9 +3316,6 @@ void qmp_drive_mirror(const char *device, const char *target,
if (!has_on_target_error) {
on_target_error = BLOCKDEV_ON_ERROR_REPORT;
}
if (!has_mode) {
mode = NEW_IMAGE_MODE_ABSOLUTE_PATHS;
}
if (!has_granularity) {
granularity = 0;
}
@@ -3349,6 +3337,55 @@ void qmp_drive_mirror(const char *device, const char *target,
return;
}
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_MIRROR_SOURCE, errp)) {
return;
}
if (bdrv_op_is_blocked(target, BLOCK_OP_TYPE_MIRROR_TARGET, errp)) {
return;
}
if (target->blk) {
error_setg(errp, "Cannot mirror to an attached block device");
return;
}
if (!bs->backing && sync == MIRROR_SYNC_MODE_TOP) {
sync = MIRROR_SYNC_MODE_FULL;
}
/* pass the node name to replace to mirror start since it's loose coupling
* and will allow to check whether the node still exist at mirror completion
*/
mirror_start(bs, target,
has_replaces ? replaces : NULL,
speed, granularity, buf_size, sync,
on_source_error, on_target_error, unmap,
block_job_cb, bs, errp);
}
void qmp_drive_mirror(const char *device, const char *target,
bool has_format, const char *format,
bool has_node_name, const char *node_name,
bool has_replaces, const char *replaces,
enum MirrorSyncMode sync,
bool has_mode, enum NewImageMode mode,
bool has_speed, int64_t speed,
bool has_granularity, uint32_t granularity,
bool has_buf_size, int64_t buf_size,
bool has_on_source_error, BlockdevOnError on_source_error,
bool has_on_target_error, BlockdevOnError on_target_error,
bool has_unmap, bool unmap,
Error **errp)
{
BlockDriverState *bs;
BlockBackend *blk;
BlockDriverState *source, *target_bs;
AioContext *aio_context;
Error *local_err = NULL;
QDict *options = NULL;
int flags;
int64_t size;
int ret;
blk = blk_by_name(device);
if (!blk) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
@@ -3364,15 +3401,14 @@ void qmp_drive_mirror(const char *device, const char *target,
goto out;
}
bs = blk_bs(blk);
if (!has_mode) {
mode = NEW_IMAGE_MODE_ABSOLUTE_PATHS;
}
if (!has_format) {
format = mode == NEW_IMAGE_MODE_EXISTING ? NULL : bs->drv->format_name;
}
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_MIRROR, errp)) {
goto out;
}
flags = bs->open_flags | BDRV_O_RDWR;
source = backing_bs(bs);
if (!source && sync == MIRROR_SYNC_MODE_TOP) {
@@ -3467,22 +3503,78 @@ void qmp_drive_mirror(const char *device, const char *target,
bdrv_set_aio_context(target_bs, aio_context);
/* pass the node name to replace to mirror start since it's loose coupling
* and will allow to check whether the node still exist at mirror completion
*/
mirror_start(bs, target_bs,
has_replaces ? replaces : NULL,
speed, granularity, buf_size, sync,
on_source_error, on_target_error,
unmap,
block_job_cb, bs, &local_err);
if (local_err != NULL) {
bdrv_unref(target_bs);
blockdev_mirror_common(bs, target_bs,
has_replaces, replaces, sync,
has_speed, speed,
has_granularity, granularity,
has_buf_size, buf_size,
has_on_source_error, on_source_error,
has_on_target_error, on_target_error,
has_unmap, unmap,
&local_err);
if (local_err) {
error_propagate(errp, local_err);
goto out;
bdrv_unref(target_bs);
}
out:
aio_context_release(aio_context);
}
void qmp_blockdev_mirror(const char *device, const char *target,
bool has_replaces, const char *replaces,
MirrorSyncMode sync,
bool has_speed, int64_t speed,
bool has_granularity, uint32_t granularity,
bool has_buf_size, int64_t buf_size,
bool has_on_source_error,
BlockdevOnError on_source_error,
bool has_on_target_error,
BlockdevOnError on_target_error,
Error **errp)
{
BlockDriverState *bs;
BlockBackend *blk;
BlockDriverState *target_bs;
AioContext *aio_context;
Error *local_err = NULL;
blk = blk_by_name(device);
if (!blk) {
error_setg(errp, "Device '%s' not found", device);
return;
}
bs = blk_bs(blk);
if (!bs) {
error_setg(errp, "Device '%s' has no media", device);
return;
}
target_bs = bdrv_lookup_bs(target, target, errp);
if (!target_bs) {
return;
}
aio_context = bdrv_get_aio_context(bs);
aio_context_acquire(aio_context);
bdrv_ref(target_bs);
bdrv_set_aio_context(target_bs, aio_context);
blockdev_mirror_common(bs, target_bs,
has_replaces, replaces, sync,
has_speed, speed,
has_granularity, granularity,
has_buf_size, buf_size,
has_on_source_error, on_source_error,
has_on_target_error, on_target_error,
true, true,
&local_err);
if (local_err) {
error_propagate(errp, local_err);
bdrv_unref(target_bs);
}
out:
aio_context_release(aio_context);
}
@@ -3872,18 +3964,6 @@ QemuOptsList qemu_common_drive_opts = {
.name = "discard",
.type = QEMU_OPT_STRING,
.help = "discard operation (ignore/off, unmap/on)",
},{
.name = BDRV_OPT_CACHE_WB,
.type = QEMU_OPT_BOOL,
.help = "enables writeback mode for any caches",
},{
.name = BDRV_OPT_CACHE_DIRECT,
.type = QEMU_OPT_BOOL,
.help = "enables use of O_DIRECT (bypass the host page cache)",
},{
.name = BDRV_OPT_CACHE_NO_FLUSH,
.type = QEMU_OPT_BOOL,
.help = "ignore any flush requests for the device",
},{
.name = "aio",
.type = QEMU_OPT_STRING,
@@ -3991,18 +4071,6 @@ static QemuOptsList qemu_root_bds_opts = {
.name = "discard",
.type = QEMU_OPT_STRING,
.help = "discard operation (ignore/off, unmap/on)",
},{
.name = "cache.writeback",
.type = QEMU_OPT_BOOL,
.help = "enables writeback mode for any caches",
},{
.name = "cache.direct",
.type = QEMU_OPT_BOOL,
.help = "enables use of O_DIRECT (bypass the host page cache)",
},{
.name = "cache.no-flush",
.type = QEMU_OPT_BOOL,
.help = "ignore any flush requests for the device",
},{
.name = "aio",
.type = QEMU_OPT_STRING,

View File

@@ -938,7 +938,7 @@ int main(int argc, char **argv)
unsigned long tmp;
if (fscanf(fp, "%lu", &tmp) == 1) {
mmap_min_addr = tmp;
qemu_log("host mmap_min_addr=0x%lx\n", mmap_min_addr);
qemu_log_mask(CPU_LOG_PAGE, "host mmap_min_addr=0x%lx\n", mmap_min_addr);
}
fclose(fp);
}
@@ -955,7 +955,7 @@ int main(int argc, char **argv)
free(target_environ);
if (qemu_log_enabled()) {
if (qemu_loglevel_mask(CPU_LOG_PAGE)) {
qemu_log("guest_base 0x%lx\n", guest_base);
log_page_dump();

View File

@@ -26,8 +26,6 @@
#include "qemu.h"
#include "target_signal.h"
//#define DEBUG_SIGNAL
void signal_init(void)
{
}

19
configure vendored
View File

@@ -2426,6 +2426,14 @@ else
fi
##########################################
# getifaddrs (for tests/test-io-channel-socket )
have_ifaddrs_h=yes
if ! check_include "ifaddrs.h" ; then
have_ifaddrs_h=no
fi
##########################################
# VTE probe
@@ -4758,7 +4766,11 @@ echo "GTK GL support $gtk_gl"
echo "GNUTLS support $gnutls"
echo "GNUTLS hash $gnutls_hash"
echo "libgcrypt $gcrypt"
echo "nettle $nettle ${nettle+($nettle_version)}"
if test "$nettle" = "yes"; then
echo "nettle $nettle ($nettle_version)"
else
echo "nettle $nettle"
fi
echo "libtasn1 $tasn1"
echo "VTE support $vte"
echo "curses support $curses"
@@ -4805,7 +4817,7 @@ echo "libcap-ng support $cap_ng"
echo "vhost-net support $vhost_net"
echo "vhost-scsi support $vhost_scsi"
echo "Trace backends $trace_backends"
if test "$trace_backend" = "simple"; then
if have_backend "simple"; then
echo "Trace output file $trace_file-<pid>"
fi
if test "$spice" = "yes"; then
@@ -5137,6 +5149,9 @@ fi
if test "$tasn1" = "yes" ; then
echo "CONFIG_TASN1=y" >> $config_host_mak
fi
if test "$have_ifaddrs_h" = "yes" ; then
echo "HAVE_IFADDRS_H=y" >> $config_host_mak
fi
if test "$vte" = "yes" ; then
echo "CONFIG_VTE=y" >> $config_host_mak
echo "VTE_CFLAGS=$vte_cflags" >> $config_host_mak

View File

@@ -65,7 +65,7 @@ ivshmem_server_parse_args(IvshmemServerArgs *args, int argc, char *argv[])
{
int c;
unsigned long long v;
Error *errp = NULL;
Error *err = NULL;
while ((c = getopt(argc, argv,
"h" /* help */
@@ -104,11 +104,9 @@ ivshmem_server_parse_args(IvshmemServerArgs *args, int argc, char *argv[])
break;
case 'l': /* shm_size */
parse_option_size("shm_size", optarg, &args->shm_size, &errp);
if (errp) {
fprintf(stderr, "cannot parse shm size: %s\n",
error_get_pretty(errp));
error_free(errp);
parse_option_size("shm_size", optarg, &args->shm_size, &err);
if (err) {
error_report_err(err);
ivshmem_server_usage(argv[0], 1);
}
break;

31
cpus.c
View File

@@ -1558,22 +1558,29 @@ CpuInfoList *qmp_query_cpus(Error **errp)
info->value->qom_path = object_get_canonical_path(OBJECT(cpu));
info->value->thread_id = cpu->thread_id;
#if defined(TARGET_I386)
info->value->has_pc = true;
info->value->pc = env->eip + env->segs[R_CS].base;
info->value->arch = CPU_INFO_ARCH_X86;
info->value->u.x86 = g_new0(CpuInfoX86, 1);
info->value->u.x86->pc = env->eip + env->segs[R_CS].base;
#elif defined(TARGET_PPC)
info->value->has_nip = true;
info->value->nip = env->nip;
info->value->arch = CPU_INFO_ARCH_PPC;
info->value->u.ppc = g_new0(CpuInfoPPC, 1);
info->value->u.ppc->nip = env->nip;
#elif defined(TARGET_SPARC)
info->value->has_pc = true;
info->value->pc = env->pc;
info->value->has_npc = true;
info->value->npc = env->npc;
info->value->arch = CPU_INFO_ARCH_SPARC;
info->value->u.sparc = g_new0(CpuInfoSPARC, 1);
info->value->u.sparc->pc = env->pc;
info->value->u.sparc->npc = env->npc;
#elif defined(TARGET_MIPS)
info->value->has_PC = true;
info->value->PC = env->active_tc.PC;
info->value->arch = CPU_INFO_ARCH_MIPS;
info->value->u.mips = g_new0(CpuInfoMIPS, 1);
info->value->u.mips->PC = env->active_tc.PC;
#elif defined(TARGET_TRICORE)
info->value->has_PC = true;
info->value->PC = env->PC;
info->value->arch = CPU_INFO_ARCH_TRICORE;
info->value->u.tricore = g_new0(CpuInfoTricore, 1);
info->value->u.tricore->PC = env->PC;
#else
info->value->arch = CPU_INFO_ARCH_OTHER;
info->value->u.other = g_new0(CpuInfoOther, 1);
#endif
/* XXX: waiting for the qapi to support GSList */

View File

@@ -7,6 +7,7 @@ crypto-obj-y += tlscreds.o
crypto-obj-y += tlscredsanon.o
crypto-obj-y += tlscredsx509.o
crypto-obj-y += tlssession.o
crypto-obj-y += secret.o
# Let the userspace emulators avoid linking gnutls/etc
crypto-aes-obj-y = aes.o

View File

@@ -21,19 +21,67 @@
#include "crypto/cipher.h"
static size_t alg_key_len[QCRYPTO_CIPHER_ALG_LAST] = {
static size_t alg_key_len[QCRYPTO_CIPHER_ALG__MAX] = {
[QCRYPTO_CIPHER_ALG_AES_128] = 16,
[QCRYPTO_CIPHER_ALG_AES_192] = 24,
[QCRYPTO_CIPHER_ALG_AES_256] = 32,
[QCRYPTO_CIPHER_ALG_DES_RFB] = 8,
};
static size_t alg_block_len[QCRYPTO_CIPHER_ALG__MAX] = {
[QCRYPTO_CIPHER_ALG_AES_128] = 16,
[QCRYPTO_CIPHER_ALG_AES_192] = 16,
[QCRYPTO_CIPHER_ALG_AES_256] = 16,
[QCRYPTO_CIPHER_ALG_DES_RFB] = 8,
};
static bool mode_need_iv[QCRYPTO_CIPHER_MODE__MAX] = {
[QCRYPTO_CIPHER_MODE_ECB] = false,
[QCRYPTO_CIPHER_MODE_CBC] = true,
};
size_t qcrypto_cipher_get_block_len(QCryptoCipherAlgorithm alg)
{
if (alg >= G_N_ELEMENTS(alg_key_len)) {
return 0;
}
return alg_block_len[alg];
}
size_t qcrypto_cipher_get_key_len(QCryptoCipherAlgorithm alg)
{
if (alg >= G_N_ELEMENTS(alg_key_len)) {
return 0;
}
return alg_key_len[alg];
}
size_t qcrypto_cipher_get_iv_len(QCryptoCipherAlgorithm alg,
QCryptoCipherMode mode)
{
if (alg >= G_N_ELEMENTS(alg_block_len)) {
return 0;
}
if (mode >= G_N_ELEMENTS(mode_need_iv)) {
return 0;
}
if (mode_need_iv[mode]) {
return alg_block_len[alg];
}
return 0;
}
static bool
qcrypto_cipher_validate_key_length(QCryptoCipherAlgorithm alg,
size_t nkey,
Error **errp)
{
if ((unsigned)alg >= QCRYPTO_CIPHER_ALG_LAST) {
if ((unsigned)alg >= QCRYPTO_CIPHER_ALG__MAX) {
error_setg(errp, "Cipher algorithm %d out of range",
alg);
return false;
@@ -41,7 +89,7 @@ qcrypto_cipher_validate_key_length(QCryptoCipherAlgorithm alg,
if (alg_key_len[alg] != nkey) {
error_setg(errp, "Cipher key length %zu should be %zu",
alg_key_len[alg], nkey);
nkey, alg_key_len[alg]);
return false;
}
return true;

View File

@@ -24,12 +24,18 @@
#include <gnutls/gnutls.h>
#include <gnutls/crypto.h>
static int qcrypto_hash_alg_map[QCRYPTO_HASH_ALG_LAST] = {
static int qcrypto_hash_alg_map[QCRYPTO_HASH_ALG__MAX] = {
[QCRYPTO_HASH_ALG_MD5] = GNUTLS_DIG_MD5,
[QCRYPTO_HASH_ALG_SHA1] = GNUTLS_DIG_SHA1,
[QCRYPTO_HASH_ALG_SHA256] = GNUTLS_DIG_SHA256,
};
static size_t qcrypto_hash_alg_size[QCRYPTO_HASH_ALG__MAX] = {
[QCRYPTO_HASH_ALG_MD5] = 16,
[QCRYPTO_HASH_ALG_SHA1] = 20,
[QCRYPTO_HASH_ALG_SHA256] = 32,
};
gboolean qcrypto_hash_supports(QCryptoHashAlgorithm alg)
{
if (alg < G_N_ELEMENTS(qcrypto_hash_alg_map)) {
@@ -38,6 +44,15 @@ gboolean qcrypto_hash_supports(QCryptoHashAlgorithm alg)
return false;
}
size_t qcrypto_hash_digest_len(QCryptoHashAlgorithm alg)
{
if (alg >= G_N_ELEMENTS(qcrypto_hash_alg_size)) {
return 0;
}
return qcrypto_hash_alg_size[alg];
}
int qcrypto_hash_bytesv(QCryptoHashAlgorithm alg,
const struct iovec *iov,
size_t niov,

513
crypto/secret.c Normal file
View File

@@ -0,0 +1,513 @@
/*
* QEMU crypto secret support
*
* Copyright (c) 2015 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "crypto/secret.h"
#include "crypto/cipher.h"
#include "qom/object_interfaces.h"
#include "qemu/base64.h"
#include "trace.h"
static void
qcrypto_secret_load_data(QCryptoSecret *secret,
uint8_t **output,
size_t *outputlen,
Error **errp)
{
char *data = NULL;
size_t length = 0;
GError *gerr = NULL;
*output = NULL;
*outputlen = 0;
if (secret->file) {
if (secret->data) {
error_setg(errp,
"'file' and 'data' are mutually exclusive");
return;
}
if (!g_file_get_contents(secret->file, &data, &length, &gerr)) {
error_setg(errp,
"Unable to read %s: %s",
secret->file, gerr->message);
g_error_free(gerr);
return;
}
*output = (uint8_t *)data;
*outputlen = length;
} else if (secret->data) {
*outputlen = strlen(secret->data);
*output = (uint8_t *)g_strdup(secret->data);
} else {
error_setg(errp, "Either 'file' or 'data' must be provided");
}
}
static void qcrypto_secret_decrypt(QCryptoSecret *secret,
const uint8_t *input,
size_t inputlen,
uint8_t **output,
size_t *outputlen,
Error **errp)
{
uint8_t *key = NULL, *ciphertext = NULL, *iv = NULL;
size_t keylen, ciphertextlen, ivlen;
QCryptoCipher *aes = NULL;
uint8_t *plaintext = NULL;
*output = NULL;
*outputlen = 0;
if (qcrypto_secret_lookup(secret->keyid,
&key, &keylen,
errp) < 0) {
goto cleanup;
}
if (keylen != 32) {
error_setg(errp, "Key should be 32 bytes in length");
goto cleanup;
}
if (!secret->iv) {
error_setg(errp, "IV is required to decrypt secret");
goto cleanup;
}
iv = qbase64_decode(secret->iv, -1, &ivlen, errp);
if (!iv) {
goto cleanup;
}
if (ivlen != 16) {
error_setg(errp, "IV should be 16 bytes in length not %zu",
ivlen);
goto cleanup;
}
aes = qcrypto_cipher_new(QCRYPTO_CIPHER_ALG_AES_256,
QCRYPTO_CIPHER_MODE_CBC,
key, keylen,
errp);
if (!aes) {
goto cleanup;
}
if (qcrypto_cipher_setiv(aes, iv, ivlen, errp) < 0) {
goto cleanup;
}
if (secret->format == QCRYPTO_SECRET_FORMAT_BASE64) {
ciphertext = qbase64_decode((const gchar*)input,
inputlen,
&ciphertextlen,
errp);
if (!ciphertext) {
goto cleanup;
}
plaintext = g_new0(uint8_t, ciphertextlen + 1);
} else {
ciphertextlen = inputlen;
plaintext = g_new0(uint8_t, inputlen + 1);
}
if (qcrypto_cipher_decrypt(aes,
ciphertext ? ciphertext : input,
plaintext,
ciphertextlen,
errp) < 0) {
plaintext = NULL;
goto cleanup;
}
if (plaintext[ciphertextlen - 1] > 16 ||
plaintext[ciphertextlen - 1] > ciphertextlen) {
error_setg(errp, "Incorrect number of padding bytes (%d) "
"found on decrypted data",
(int)plaintext[ciphertextlen - 1]);
g_free(plaintext);
plaintext = NULL;
goto cleanup;
}
/* Even though plaintext may contain arbitrary NUL
* ensure it is explicitly NUL terminated.
*/
ciphertextlen -= plaintext[ciphertextlen - 1];
plaintext[ciphertextlen] = '\0';
*output = plaintext;
*outputlen = ciphertextlen;
cleanup:
g_free(ciphertext);
g_free(iv);
g_free(key);
qcrypto_cipher_free(aes);
}
static void qcrypto_secret_decode(const uint8_t *input,
size_t inputlen,
uint8_t **output,
size_t *outputlen,
Error **errp)
{
*output = qbase64_decode((const gchar*)input,
inputlen,
outputlen,
errp);
}
static void
qcrypto_secret_prop_set_loaded(Object *obj,
bool value,
Error **errp)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
if (value) {
Error *local_err = NULL;
uint8_t *input = NULL;
size_t inputlen = 0;
uint8_t *output = NULL;
size_t outputlen = 0;
qcrypto_secret_load_data(secret, &input, &inputlen, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (secret->keyid) {
qcrypto_secret_decrypt(secret, input, inputlen,
&output, &outputlen, &local_err);
g_free(input);
if (local_err) {
error_propagate(errp, local_err);
return;
}
input = output;
inputlen = outputlen;
} else {
if (secret->format != QCRYPTO_SECRET_FORMAT_RAW) {
qcrypto_secret_decode(input, inputlen,
&output, &outputlen, &local_err);
g_free(input);
if (local_err) {
error_propagate(errp, local_err);
return;
}
input = output;
inputlen = outputlen;
}
}
secret->rawdata = input;
secret->rawlen = inputlen;
} else {
g_free(secret->rawdata);
secret->rawlen = 0;
}
}
static bool
qcrypto_secret_prop_get_loaded(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
return secret->data != NULL;
}
static void
qcrypto_secret_prop_set_format(Object *obj,
int value,
Error **errp G_GNUC_UNUSED)
{
QCryptoSecret *creds = QCRYPTO_SECRET(obj);
creds->format = value;
}
static int
qcrypto_secret_prop_get_format(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QCryptoSecret *creds = QCRYPTO_SECRET(obj);
return creds->format;
}
static void
qcrypto_secret_prop_set_data(Object *obj,
const char *value,
Error **errp)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
g_free(secret->data);
secret->data = g_strdup(value);
}
static char *
qcrypto_secret_prop_get_data(Object *obj,
Error **errp)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
return g_strdup(secret->data);
}
static void
qcrypto_secret_prop_set_file(Object *obj,
const char *value,
Error **errp)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
g_free(secret->file);
secret->file = g_strdup(value);
}
static char *
qcrypto_secret_prop_get_file(Object *obj,
Error **errp)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
return g_strdup(secret->file);
}
static void
qcrypto_secret_prop_set_iv(Object *obj,
const char *value,
Error **errp)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
g_free(secret->iv);
secret->iv = g_strdup(value);
}
static char *
qcrypto_secret_prop_get_iv(Object *obj,
Error **errp)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
return g_strdup(secret->iv);
}
static void
qcrypto_secret_prop_set_keyid(Object *obj,
const char *value,
Error **errp)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
g_free(secret->keyid);
secret->keyid = g_strdup(value);
}
static char *
qcrypto_secret_prop_get_keyid(Object *obj,
Error **errp)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
return g_strdup(secret->keyid);
}
static void
qcrypto_secret_complete(UserCreatable *uc, Error **errp)
{
object_property_set_bool(OBJECT(uc), true, "loaded", errp);
}
static void
qcrypto_secret_init(Object *obj)
{
object_property_add_bool(obj, "loaded",
qcrypto_secret_prop_get_loaded,
qcrypto_secret_prop_set_loaded,
NULL);
object_property_add_enum(obj, "format",
"QCryptoSecretFormat",
QCryptoSecretFormat_lookup,
qcrypto_secret_prop_get_format,
qcrypto_secret_prop_set_format,
NULL);
object_property_add_str(obj, "data",
qcrypto_secret_prop_get_data,
qcrypto_secret_prop_set_data,
NULL);
object_property_add_str(obj, "file",
qcrypto_secret_prop_get_file,
qcrypto_secret_prop_set_file,
NULL);
object_property_add_str(obj, "keyid",
qcrypto_secret_prop_get_keyid,
qcrypto_secret_prop_set_keyid,
NULL);
object_property_add_str(obj, "iv",
qcrypto_secret_prop_get_iv,
qcrypto_secret_prop_set_iv,
NULL);
}
static void
qcrypto_secret_finalize(Object *obj)
{
QCryptoSecret *secret = QCRYPTO_SECRET(obj);
g_free(secret->iv);
g_free(secret->file);
g_free(secret->keyid);
g_free(secret->rawdata);
g_free(secret->data);
}
static void
qcrypto_secret_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
ucc->complete = qcrypto_secret_complete;
}
int qcrypto_secret_lookup(const char *secretid,
uint8_t **data,
size_t *datalen,
Error **errp)
{
Object *obj;
QCryptoSecret *secret;
obj = object_resolve_path_component(
object_get_objects_root(), secretid);
if (!obj) {
error_setg(errp, "No secret with id '%s'", secretid);
return -1;
}
secret = (QCryptoSecret *)
object_dynamic_cast(obj,
TYPE_QCRYPTO_SECRET);
if (!secret) {
error_setg(errp, "Object with id '%s' is not a secret",
secretid);
return -1;
}
if (!secret->rawdata) {
error_setg(errp, "Secret with id '%s' has no data",
secretid);
return -1;
}
*data = g_new0(uint8, secret->rawlen + 1);
memcpy(*data, secret->rawdata, secret->rawlen);
(*data)[secret->rawlen] = '\0';
*datalen = secret->rawlen;
return 0;
}
char *qcrypto_secret_lookup_as_utf8(const char *secretid,
Error **errp)
{
uint8_t *data;
size_t datalen;
if (qcrypto_secret_lookup(secretid,
&data,
&datalen,
errp) < 0) {
return NULL;
}
if (!g_utf8_validate((const gchar*)data, datalen, NULL)) {
error_setg(errp,
"Data from secret %s is not valid UTF-8",
secretid);
g_free(data);
return NULL;
}
return (char *)data;
}
char *qcrypto_secret_lookup_as_base64(const char *secretid,
Error **errp)
{
uint8_t *data;
size_t datalen;
char *ret;
if (qcrypto_secret_lookup(secretid,
&data,
&datalen,
errp) < 0) {
return NULL;
}
ret = g_base64_encode(data, datalen);
g_free(data);
return ret;
}
static const TypeInfo qcrypto_secret_info = {
.parent = TYPE_OBJECT,
.name = TYPE_QCRYPTO_SECRET,
.instance_size = sizeof(QCryptoSecret),
.instance_init = qcrypto_secret_init,
.instance_finalize = qcrypto_secret_finalize,
.class_size = sizeof(QCryptoSecretClass),
.class_init = qcrypto_secret_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qcrypto_secret_register_types(void)
{
type_register_static(&qcrypto_secret_info);
}
type_init(qcrypto_secret_register_types);

View File

@@ -20,6 +20,7 @@
#include "crypto/tlscredsx509.h"
#include "crypto/tlscredspriv.h"
#include "crypto/secret.h"
#include "qom/object_interfaces.h"
#include "trace.h"
@@ -607,9 +608,30 @@ qcrypto_tls_creds_x509_load(QCryptoTLSCredsX509 *creds,
}
if (cert != NULL && key != NULL) {
#if GNUTLS_VERSION_NUMBER >= 0x030111
char *password = NULL;
if (creds->passwordid) {
password = qcrypto_secret_lookup_as_utf8(creds->passwordid,
errp);
if (!password) {
goto cleanup;
}
}
ret = gnutls_certificate_set_x509_key_file2(creds->data,
cert, key,
GNUTLS_X509_FMT_PEM,
password,
0);
g_free(password);
#else /* GNUTLS_VERSION_NUMBER < 0x030111 */
if (creds->passwordid) {
error_setg(errp, "PKCS8 decryption requires GNUTLS >= 3.1.11");
goto cleanup;
}
ret = gnutls_certificate_set_x509_key_file(creds->data,
cert, key,
GNUTLS_X509_FMT_PEM);
#endif /* GNUTLS_VERSION_NUMBER < 0x030111 */
if (ret < 0) {
error_setg(errp, "Cannot load certificate '%s' & key '%s': %s",
cert, key, gnutls_strerror(ret));
@@ -737,6 +759,27 @@ qcrypto_tls_creds_x509_prop_set_sanity(Object *obj,
}
static void
qcrypto_tls_creds_x509_prop_set_passwordid(Object *obj,
const char *value,
Error **errp G_GNUC_UNUSED)
{
QCryptoTLSCredsX509 *creds = QCRYPTO_TLS_CREDS_X509(obj);
creds->passwordid = g_strdup(value);
}
static char *
qcrypto_tls_creds_x509_prop_get_passwordid(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QCryptoTLSCredsX509 *creds = QCRYPTO_TLS_CREDS_X509(obj);
return g_strdup(creds->passwordid);
}
static bool
qcrypto_tls_creds_x509_prop_get_sanity(Object *obj,
Error **errp G_GNUC_UNUSED)
@@ -769,6 +812,10 @@ qcrypto_tls_creds_x509_init(Object *obj)
qcrypto_tls_creds_x509_prop_get_sanity,
qcrypto_tls_creds_x509_prop_set_sanity,
NULL);
object_property_add_str(obj, "passwordid",
qcrypto_tls_creds_x509_prop_get_passwordid,
qcrypto_tls_creds_x509_prop_set_passwordid,
NULL);
}
@@ -777,6 +824,7 @@ qcrypto_tls_creds_x509_finalize(Object *obj)
{
QCryptoTLSCredsX509 *creds = QCRYPTO_TLS_CREDS_X509(obj);
g_free(creds->passwordid);
qcrypto_tls_creds_x509_unload(creds);
}

View File

@@ -9,6 +9,11 @@ CONFIG_VGA_CIRRUS=y
CONFIG_VMWARE_VGA=y
CONFIG_VIRTIO_VGA=y
CONFIG_VMMOUSE=y
CONFIG_IPMI=y
CONFIG_IPMI_LOCAL=y
CONFIG_IPMI_EXTERN=y
CONFIG_ISA_IPMI_KCS=y
CONFIG_ISA_IPMI_BT=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
@@ -46,7 +51,10 @@ CONFIG_APIC=y
CONFIG_IOAPIC=y
CONFIG_PVPANIC=y
CONFIG_MEM_HOTPLUG=y
CONFIG_NVDIMM=y
CONFIG_ACPI_NVDIMM=y
CONFIG_XIO3130=y
CONFIG_IOH3420=y
CONFIG_I82801B11=y
CONFIG_SMBIOS=y
CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)

View File

@@ -9,6 +9,11 @@ CONFIG_VGA_CIRRUS=y
CONFIG_VMWARE_VGA=y
CONFIG_VIRTIO_VGA=y
CONFIG_VMMOUSE=y
CONFIG_IPMI=y
CONFIG_IPMI_LOCAL=y
CONFIG_IPMI_EXTERN=y
CONFIG_ISA_IPMI_KCS=y
CONFIG_ISA_IPMI_BT=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
@@ -46,7 +51,10 @@ CONFIG_APIC=y
CONFIG_IOAPIC=y
CONFIG_PVPANIC=y
CONFIG_MEM_HOTPLUG=y
CONFIG_NVDIMM=y
CONFIG_ACPI_NVDIMM=y
CONFIG_XIO3130=y
CONFIG_IOH3420=y
CONFIG_I82801B11=y
CONFIG_SMBIOS=y
CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)

View File

@@ -4,7 +4,10 @@ common-obj-$(CONFIG_ARM_DIS) += arm.o
common-obj-$(CONFIG_ARM_A64_DIS) += arm-a64.o
common-obj-$(CONFIG_ARM_A64_DIS) += libvixl/
libvixldir = $(SRC_PATH)/disas/libvixl
arm-a64.o-cflags := -I$(libvixldir)
# The -Wno-sign-compare is needed only for gcc 4.6, which complains about
# some signed-unsigned equality comparisons in libvixl which later gcc
# versions do not.
arm-a64.o-cflags := -I$(libvixldir) -Wno-sign-compare
common-obj-$(CONFIG_CRIS_DIS) += cris.o
common-obj-$(CONFIG_HPPA_DIS) += hppa.o
common-obj-$(CONFIG_I386_DIS) += i386.o

View File

@@ -17,7 +17,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "a64/disasm-a64.h"
#include "vixl/a64/disasm-a64.h"
extern "C" {
#include "disas/bfd.h"

View File

@@ -1,8 +1,11 @@
libvixl_OBJS = utils.o \
a64/instructions-a64.o \
a64/decoder-a64.o \
a64/disasm-a64.o
libvixl_OBJS = vixl/utils.o \
vixl/compiler-intrinsics.o \
vixl/a64/instructions-a64.o \
vixl/a64/decoder-a64.o \
vixl/a64/disasm-a64.o
$(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CFLAGS := -I$(SRC_PATH)/disas/libvixl $(QEMU_CFLAGS)
# The -Wno-sign-compare is needed only for gcc 4.6, which complains about
# some signed-unsigned equality comparisons which later gcc versions do not.
$(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CFLAGS := -I$(SRC_PATH)/disas/libvixl $(QEMU_CFLAGS) -Wno-sign-compare
common-obj-$(CONFIG_ARM_A64_DIS) += $(libvixl_OBJS)

View File

@@ -2,11 +2,10 @@
The code in this directory is a subset of libvixl:
https://github.com/armvixl/vixl
(specifically, it is the set of files needed for disassembly only,
taken from libvixl 1.7).
taken from libvixl 1.12).
Bugfixes should preferably be sent upstream initially.
The disassembler does not currently support the entire A64 instruction
set. Notably:
* No Advanced SIMD support.
* Limited support for system instructions.
* A few miscellaneous integer and floating point instructions are missing.

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@@ -1,314 +0,0 @@
// Copyright 2013, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of ARM Limited nor the names of its contributors may be
// used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include "a64/instructions-a64.h"
#include "a64/assembler-a64.h"
namespace vixl {
// Floating-point infinity values.
const float kFP32PositiveInfinity = rawbits_to_float(0x7f800000);
const float kFP32NegativeInfinity = rawbits_to_float(0xff800000);
const double kFP64PositiveInfinity =
rawbits_to_double(UINT64_C(0x7ff0000000000000));
const double kFP64NegativeInfinity =
rawbits_to_double(UINT64_C(0xfff0000000000000));
// The default NaN values (for FPCR.DN=1).
const double kFP64DefaultNaN = rawbits_to_double(UINT64_C(0x7ff8000000000000));
const float kFP32DefaultNaN = rawbits_to_float(0x7fc00000);
static uint64_t RotateRight(uint64_t value,
unsigned int rotate,
unsigned int width) {
VIXL_ASSERT(width <= 64);
rotate &= 63;
return ((value & ((UINT64_C(1) << rotate) - 1)) <<
(width - rotate)) | (value >> rotate);
}
static uint64_t RepeatBitsAcrossReg(unsigned reg_size,
uint64_t value,
unsigned width) {
VIXL_ASSERT((width == 2) || (width == 4) || (width == 8) || (width == 16) ||
(width == 32));
VIXL_ASSERT((reg_size == kWRegSize) || (reg_size == kXRegSize));
uint64_t result = value & ((UINT64_C(1) << width) - 1);
for (unsigned i = width; i < reg_size; i *= 2) {
result |= (result << i);
}
return result;
}
bool Instruction::IsLoad() const {
if (Mask(LoadStoreAnyFMask) != LoadStoreAnyFixed) {
return false;
}
if (Mask(LoadStorePairAnyFMask) == LoadStorePairAnyFixed) {
return Mask(LoadStorePairLBit) != 0;
} else {
LoadStoreOp op = static_cast<LoadStoreOp>(Mask(LoadStoreOpMask));
switch (op) {
case LDRB_w:
case LDRH_w:
case LDR_w:
case LDR_x:
case LDRSB_w:
case LDRSB_x:
case LDRSH_w:
case LDRSH_x:
case LDRSW_x:
case LDR_s:
case LDR_d: return true;
default: return false;
}
}
}
bool Instruction::IsStore() const {
if (Mask(LoadStoreAnyFMask) != LoadStoreAnyFixed) {
return false;
}
if (Mask(LoadStorePairAnyFMask) == LoadStorePairAnyFixed) {
return Mask(LoadStorePairLBit) == 0;
} else {
LoadStoreOp op = static_cast<LoadStoreOp>(Mask(LoadStoreOpMask));
switch (op) {
case STRB_w:
case STRH_w:
case STR_w:
case STR_x:
case STR_s:
case STR_d: return true;
default: return false;
}
}
}
// Logical immediates can't encode zero, so a return value of zero is used to
// indicate a failure case. Specifically, where the constraints on imm_s are
// not met.
uint64_t Instruction::ImmLogical() const {
unsigned reg_size = SixtyFourBits() ? kXRegSize : kWRegSize;
int64_t n = BitN();
int64_t imm_s = ImmSetBits();
int64_t imm_r = ImmRotate();
// An integer is constructed from the n, imm_s and imm_r bits according to
// the following table:
//
// N imms immr size S R
// 1 ssssss rrrrrr 64 UInt(ssssss) UInt(rrrrrr)
// 0 0sssss xrrrrr 32 UInt(sssss) UInt(rrrrr)
// 0 10ssss xxrrrr 16 UInt(ssss) UInt(rrrr)
// 0 110sss xxxrrr 8 UInt(sss) UInt(rrr)
// 0 1110ss xxxxrr 4 UInt(ss) UInt(rr)
// 0 11110s xxxxxr 2 UInt(s) UInt(r)
// (s bits must not be all set)
//
// A pattern is constructed of size bits, where the least significant S+1
// bits are set. The pattern is rotated right by R, and repeated across a
// 32 or 64-bit value, depending on destination register width.
//
if (n == 1) {
if (imm_s == 0x3F) {
return 0;
}
uint64_t bits = (UINT64_C(1) << (imm_s + 1)) - 1;
return RotateRight(bits, imm_r, 64);
} else {
if ((imm_s >> 1) == 0x1F) {
return 0;
}
for (int width = 0x20; width >= 0x2; width >>= 1) {
if ((imm_s & width) == 0) {
int mask = width - 1;
if ((imm_s & mask) == mask) {
return 0;
}
uint64_t bits = (UINT64_C(1) << ((imm_s & mask) + 1)) - 1;
return RepeatBitsAcrossReg(reg_size,
RotateRight(bits, imm_r & mask, width),
width);
}
}
}
VIXL_UNREACHABLE();
return 0;
}
float Instruction::ImmFP32() const {
// ImmFP: abcdefgh (8 bits)
// Single: aBbb.bbbc.defg.h000.0000.0000.0000.0000 (32 bits)
// where B is b ^ 1
uint32_t bits = ImmFP();
uint32_t bit7 = (bits >> 7) & 0x1;
uint32_t bit6 = (bits >> 6) & 0x1;
uint32_t bit5_to_0 = bits & 0x3f;
uint32_t result = (bit7 << 31) | ((32 - bit6) << 25) | (bit5_to_0 << 19);
return rawbits_to_float(result);
}
double Instruction::ImmFP64() const {
// ImmFP: abcdefgh (8 bits)
// Double: aBbb.bbbb.bbcd.efgh.0000.0000.0000.0000
// 0000.0000.0000.0000.0000.0000.0000.0000 (64 bits)
// where B is b ^ 1
uint32_t bits = ImmFP();
uint64_t bit7 = (bits >> 7) & 0x1;
uint64_t bit6 = (bits >> 6) & 0x1;
uint64_t bit5_to_0 = bits & 0x3f;
uint64_t result = (bit7 << 63) | ((256 - bit6) << 54) | (bit5_to_0 << 48);
return rawbits_to_double(result);
}
LSDataSize CalcLSPairDataSize(LoadStorePairOp op) {
switch (op) {
case STP_x:
case LDP_x:
case STP_d:
case LDP_d: return LSDoubleWord;
default: return LSWord;
}
}
const Instruction* Instruction::ImmPCOffsetTarget() const {
const Instruction * base = this;
ptrdiff_t offset;
if (IsPCRelAddressing()) {
// ADR and ADRP.
offset = ImmPCRel();
if (Mask(PCRelAddressingMask) == ADRP) {
base = AlignDown(base, kPageSize);
offset *= kPageSize;
} else {
VIXL_ASSERT(Mask(PCRelAddressingMask) == ADR);
}
} else {
// All PC-relative branches.
VIXL_ASSERT(BranchType() != UnknownBranchType);
// Relative branch offsets are instruction-size-aligned.
offset = ImmBranch() << kInstructionSizeLog2;
}
return base + offset;
}
inline int Instruction::ImmBranch() const {
switch (BranchType()) {
case CondBranchType: return ImmCondBranch();
case UncondBranchType: return ImmUncondBranch();
case CompareBranchType: return ImmCmpBranch();
case TestBranchType: return ImmTestBranch();
default: VIXL_UNREACHABLE();
}
return 0;
}
void Instruction::SetImmPCOffsetTarget(const Instruction* target) {
if (IsPCRelAddressing()) {
SetPCRelImmTarget(target);
} else {
SetBranchImmTarget(target);
}
}
void Instruction::SetPCRelImmTarget(const Instruction* target) {
int32_t imm21;
if ((Mask(PCRelAddressingMask) == ADR)) {
imm21 = target - this;
} else {
VIXL_ASSERT(Mask(PCRelAddressingMask) == ADRP);
uintptr_t this_page = reinterpret_cast<uintptr_t>(this) / kPageSize;
uintptr_t target_page = reinterpret_cast<uintptr_t>(target) / kPageSize;
imm21 = target_page - this_page;
}
Instr imm = Assembler::ImmPCRelAddress(imm21);
SetInstructionBits(Mask(~ImmPCRel_mask) | imm);
}
void Instruction::SetBranchImmTarget(const Instruction* target) {
VIXL_ASSERT(((target - this) & 3) == 0);
Instr branch_imm = 0;
uint32_t imm_mask = 0;
int offset = (target - this) >> kInstructionSizeLog2;
switch (BranchType()) {
case CondBranchType: {
branch_imm = Assembler::ImmCondBranch(offset);
imm_mask = ImmCondBranch_mask;
break;
}
case UncondBranchType: {
branch_imm = Assembler::ImmUncondBranch(offset);
imm_mask = ImmUncondBranch_mask;
break;
}
case CompareBranchType: {
branch_imm = Assembler::ImmCmpBranch(offset);
imm_mask = ImmCmpBranch_mask;
break;
}
case TestBranchType: {
branch_imm = Assembler::ImmTestBranch(offset);
imm_mask = ImmTestBranch_mask;
break;
}
default: VIXL_UNREACHABLE();
}
SetInstructionBits(Mask(~imm_mask) | branch_imm);
}
void Instruction::SetImmLLiteral(const Instruction* source) {
VIXL_ASSERT(IsWordAligned(source));
ptrdiff_t offset = (source - this) >> kLiteralEntrySizeLog2;
Instr imm = Assembler::ImmLLiteral(offset);
Instr mask = ImmLLiteral_mask;
SetInstructionBits(Mask(~mask) | imm);
}
} // namespace vixl

View File

@@ -1,384 +0,0 @@
// Copyright 2013, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of ARM Limited nor the names of its contributors may be
// used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#ifndef VIXL_A64_INSTRUCTIONS_A64_H_
#define VIXL_A64_INSTRUCTIONS_A64_H_
#include "globals.h"
#include "utils.h"
#include "a64/constants-a64.h"
namespace vixl {
// ISA constants. --------------------------------------------------------------
typedef uint32_t Instr;
const unsigned kInstructionSize = 4;
const unsigned kInstructionSizeLog2 = 2;
const unsigned kLiteralEntrySize = 4;
const unsigned kLiteralEntrySizeLog2 = 2;
const unsigned kMaxLoadLiteralRange = 1 * MBytes;
// This is the nominal page size (as used by the adrp instruction); the actual
// size of the memory pages allocated by the kernel is likely to differ.
const unsigned kPageSize = 4 * KBytes;
const unsigned kPageSizeLog2 = 12;
const unsigned kWRegSize = 32;
const unsigned kWRegSizeLog2 = 5;
const unsigned kWRegSizeInBytes = kWRegSize / 8;
const unsigned kWRegSizeInBytesLog2 = kWRegSizeLog2 - 3;
const unsigned kXRegSize = 64;
const unsigned kXRegSizeLog2 = 6;
const unsigned kXRegSizeInBytes = kXRegSize / 8;
const unsigned kXRegSizeInBytesLog2 = kXRegSizeLog2 - 3;
const unsigned kSRegSize = 32;
const unsigned kSRegSizeLog2 = 5;
const unsigned kSRegSizeInBytes = kSRegSize / 8;
const unsigned kSRegSizeInBytesLog2 = kSRegSizeLog2 - 3;
const unsigned kDRegSize = 64;
const unsigned kDRegSizeLog2 = 6;
const unsigned kDRegSizeInBytes = kDRegSize / 8;
const unsigned kDRegSizeInBytesLog2 = kDRegSizeLog2 - 3;
const uint64_t kWRegMask = UINT64_C(0xffffffff);
const uint64_t kXRegMask = UINT64_C(0xffffffffffffffff);
const uint64_t kSRegMask = UINT64_C(0xffffffff);
const uint64_t kDRegMask = UINT64_C(0xffffffffffffffff);
const uint64_t kSSignMask = UINT64_C(0x80000000);
const uint64_t kDSignMask = UINT64_C(0x8000000000000000);
const uint64_t kWSignMask = UINT64_C(0x80000000);
const uint64_t kXSignMask = UINT64_C(0x8000000000000000);
const uint64_t kByteMask = UINT64_C(0xff);
const uint64_t kHalfWordMask = UINT64_C(0xffff);
const uint64_t kWordMask = UINT64_C(0xffffffff);
const uint64_t kXMaxUInt = UINT64_C(0xffffffffffffffff);
const uint64_t kWMaxUInt = UINT64_C(0xffffffff);
const int64_t kXMaxInt = INT64_C(0x7fffffffffffffff);
const int64_t kXMinInt = INT64_C(0x8000000000000000);
const int32_t kWMaxInt = INT32_C(0x7fffffff);
const int32_t kWMinInt = INT32_C(0x80000000);
const unsigned kLinkRegCode = 30;
const unsigned kZeroRegCode = 31;
const unsigned kSPRegInternalCode = 63;
const unsigned kRegCodeMask = 0x1f;
const unsigned kAddressTagOffset = 56;
const unsigned kAddressTagWidth = 8;
const uint64_t kAddressTagMask =
((UINT64_C(1) << kAddressTagWidth) - 1) << kAddressTagOffset;
VIXL_STATIC_ASSERT(kAddressTagMask == UINT64_C(0xff00000000000000));
// AArch64 floating-point specifics. These match IEEE-754.
const unsigned kDoubleMantissaBits = 52;
const unsigned kDoubleExponentBits = 11;
const unsigned kFloatMantissaBits = 23;
const unsigned kFloatExponentBits = 8;
// Floating-point infinity values.
extern const float kFP32PositiveInfinity;
extern const float kFP32NegativeInfinity;
extern const double kFP64PositiveInfinity;
extern const double kFP64NegativeInfinity;
// The default NaN values (for FPCR.DN=1).
extern const double kFP64DefaultNaN;
extern const float kFP32DefaultNaN;
enum LSDataSize {
LSByte = 0,
LSHalfword = 1,
LSWord = 2,
LSDoubleWord = 3
};
LSDataSize CalcLSPairDataSize(LoadStorePairOp op);
enum ImmBranchType {
UnknownBranchType = 0,
CondBranchType = 1,
UncondBranchType = 2,
CompareBranchType = 3,
TestBranchType = 4
};
enum AddrMode {
Offset,
PreIndex,
PostIndex
};
enum FPRounding {
// The first four values are encodable directly by FPCR<RMode>.
FPTieEven = 0x0,
FPPositiveInfinity = 0x1,
FPNegativeInfinity = 0x2,
FPZero = 0x3,
// The final rounding mode is only available when explicitly specified by the
// instruction (such as with fcvta). It cannot be set in FPCR.
FPTieAway
};
enum Reg31Mode {
Reg31IsStackPointer,
Reg31IsZeroRegister
};
// Instructions. ---------------------------------------------------------------
class Instruction {
public:
Instr InstructionBits() const {
return *(reinterpret_cast<const Instr*>(this));
}
void SetInstructionBits(Instr new_instr) {
*(reinterpret_cast<Instr*>(this)) = new_instr;
}
int Bit(int pos) const {
return (InstructionBits() >> pos) & 1;
}
uint32_t Bits(int msb, int lsb) const {
return unsigned_bitextract_32(msb, lsb, InstructionBits());
}
int32_t SignedBits(int msb, int lsb) const {
int32_t bits = *(reinterpret_cast<const int32_t*>(this));
return signed_bitextract_32(msb, lsb, bits);
}
Instr Mask(uint32_t mask) const {
return InstructionBits() & mask;
}
#define DEFINE_GETTER(Name, HighBit, LowBit, Func) \
int64_t Name() const { return Func(HighBit, LowBit); }
INSTRUCTION_FIELDS_LIST(DEFINE_GETTER)
#undef DEFINE_GETTER
// ImmPCRel is a compound field (not present in INSTRUCTION_FIELDS_LIST),
// formed from ImmPCRelLo and ImmPCRelHi.
int ImmPCRel() const {
int const offset = ((ImmPCRelHi() << ImmPCRelLo_width) | ImmPCRelLo());
int const width = ImmPCRelLo_width + ImmPCRelHi_width;
return signed_bitextract_32(width-1, 0, offset);
}
uint64_t ImmLogical() const;
float ImmFP32() const;
double ImmFP64() const;
LSDataSize SizeLSPair() const {
return CalcLSPairDataSize(
static_cast<LoadStorePairOp>(Mask(LoadStorePairMask)));
}
// Helpers.
bool IsCondBranchImm() const {
return Mask(ConditionalBranchFMask) == ConditionalBranchFixed;
}
bool IsUncondBranchImm() const {
return Mask(UnconditionalBranchFMask) == UnconditionalBranchFixed;
}
bool IsCompareBranch() const {
return Mask(CompareBranchFMask) == CompareBranchFixed;
}
bool IsTestBranch() const {
return Mask(TestBranchFMask) == TestBranchFixed;
}
bool IsPCRelAddressing() const {
return Mask(PCRelAddressingFMask) == PCRelAddressingFixed;
}
bool IsLogicalImmediate() const {
return Mask(LogicalImmediateFMask) == LogicalImmediateFixed;
}
bool IsAddSubImmediate() const {
return Mask(AddSubImmediateFMask) == AddSubImmediateFixed;
}
bool IsAddSubExtended() const {
return Mask(AddSubExtendedFMask) == AddSubExtendedFixed;
}
bool IsLoadOrStore() const {
return Mask(LoadStoreAnyFMask) == LoadStoreAnyFixed;
}
bool IsLoad() const;
bool IsStore() const;
bool IsLoadLiteral() const {
// This includes PRFM_lit.
return Mask(LoadLiteralFMask) == LoadLiteralFixed;
}
bool IsMovn() const {
return (Mask(MoveWideImmediateMask) == MOVN_x) ||
(Mask(MoveWideImmediateMask) == MOVN_w);
}
// Indicate whether Rd can be the stack pointer or the zero register. This
// does not check that the instruction actually has an Rd field.
Reg31Mode RdMode() const {
// The following instructions use sp or wsp as Rd:
// Add/sub (immediate) when not setting the flags.
// Add/sub (extended) when not setting the flags.
// Logical (immediate) when not setting the flags.
// Otherwise, r31 is the zero register.
if (IsAddSubImmediate() || IsAddSubExtended()) {
if (Mask(AddSubSetFlagsBit)) {
return Reg31IsZeroRegister;
} else {
return Reg31IsStackPointer;
}
}
if (IsLogicalImmediate()) {
// Of the logical (immediate) instructions, only ANDS (and its aliases)
// can set the flags. The others can all write into sp.
// Note that some logical operations are not available to
// immediate-operand instructions, so we have to combine two masks here.
if (Mask(LogicalImmediateMask & LogicalOpMask) == ANDS) {
return Reg31IsZeroRegister;
} else {
return Reg31IsStackPointer;
}
}
return Reg31IsZeroRegister;
}
// Indicate whether Rn can be the stack pointer or the zero register. This
// does not check that the instruction actually has an Rn field.
Reg31Mode RnMode() const {
// The following instructions use sp or wsp as Rn:
// All loads and stores.
// Add/sub (immediate).
// Add/sub (extended).
// Otherwise, r31 is the zero register.
if (IsLoadOrStore() || IsAddSubImmediate() || IsAddSubExtended()) {
return Reg31IsStackPointer;
}
return Reg31IsZeroRegister;
}
ImmBranchType BranchType() const {
if (IsCondBranchImm()) {
return CondBranchType;
} else if (IsUncondBranchImm()) {
return UncondBranchType;
} else if (IsCompareBranch()) {
return CompareBranchType;
} else if (IsTestBranch()) {
return TestBranchType;
} else {
return UnknownBranchType;
}
}
// Find the target of this instruction. 'this' may be a branch or a
// PC-relative addressing instruction.
const Instruction* ImmPCOffsetTarget() const;
// Patch a PC-relative offset to refer to 'target'. 'this' may be a branch or
// a PC-relative addressing instruction.
void SetImmPCOffsetTarget(const Instruction* target);
// Patch a literal load instruction to load from 'source'.
void SetImmLLiteral(const Instruction* source);
// Calculate the address of a literal referred to by a load-literal
// instruction, and return it as the specified type.
//
// The literal itself is safely mutable only if the backing buffer is safely
// mutable.
template <typename T>
T LiteralAddress() const {
uint64_t base_raw = reinterpret_cast<uintptr_t>(this);
ptrdiff_t offset = ImmLLiteral() << kLiteralEntrySizeLog2;
uint64_t address_raw = base_raw + offset;
// Cast the address using a C-style cast. A reinterpret_cast would be
// appropriate, but it can't cast one integral type to another.
T address = (T)(address_raw);
// Assert that the address can be represented by the specified type.
VIXL_ASSERT((uint64_t)(address) == address_raw);
return address;
}
uint32_t Literal32() const {
uint32_t literal;
memcpy(&literal, LiteralAddress<const void*>(), sizeof(literal));
return literal;
}
uint64_t Literal64() const {
uint64_t literal;
memcpy(&literal, LiteralAddress<const void*>(), sizeof(literal));
return literal;
}
float LiteralFP32() const {
return rawbits_to_float(Literal32());
}
double LiteralFP64() const {
return rawbits_to_double(Literal64());
}
const Instruction* NextInstruction() const {
return this + kInstructionSize;
}
const Instruction* InstructionAtOffset(int64_t offset) const {
VIXL_ASSERT(IsWordAligned(this + offset));
return this + offset;
}
template<typename T> static Instruction* Cast(T src) {
return reinterpret_cast<Instruction*>(src);
}
template<typename T> static const Instruction* CastConst(T src) {
return reinterpret_cast<const Instruction*>(src);
}
private:
int ImmBranch() const;
void SetPCRelImmTarget(const Instruction* target);
void SetBranchImmTarget(const Instruction* target);
};
} // namespace vixl
#endif // VIXL_A64_INSTRUCTIONS_A64_H_

File diff suppressed because it is too large Load Diff

View File

@@ -1,4 +1,4 @@
// Copyright 2013, ARM Limited
// Copyright 2014, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
@@ -27,8 +27,8 @@
#ifndef VIXL_CPU_A64_H
#define VIXL_CPU_A64_H
#include "globals.h"
#include "instructions-a64.h"
#include "vixl/globals.h"
#include "vixl/a64/instructions-a64.h"
namespace vixl {

View File

@@ -1,4 +1,4 @@
// Copyright 2013, ARM Limited
// Copyright 2014, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
@@ -24,9 +24,9 @@
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include "globals.h"
#include "utils.h"
#include "a64/decoder-a64.h"
#include "vixl/globals.h"
#include "vixl/utils.h"
#include "vixl/a64/decoder-a64.h"
namespace vixl {
@@ -271,6 +271,11 @@ void Decoder::DecodeLoadStore(const Instruction* instr) {
(instr->Bits(27, 24) == 0x9) ||
(instr->Bits(27, 24) == 0xC) ||
(instr->Bits(27, 24) == 0xD) );
// TODO(all): rearrange the tree to integrate this branch.
if ((instr->Bit(28) == 0) && (instr->Bit(29) == 0) && (instr->Bit(26) == 1)) {
DecodeNEONLoadStore(instr);
return;
}
if (instr->Bit(24) == 0) {
if (instr->Bit(28) == 0) {
@@ -278,7 +283,7 @@ void Decoder::DecodeLoadStore(const Instruction* instr) {
if (instr->Bit(26) == 0) {
VisitLoadStoreExclusive(instr);
} else {
DecodeAdvSIMDLoadStore(instr);
VIXL_UNREACHABLE();
}
} else {
if ((instr->Bits(31, 30) == 0x3) ||
@@ -483,6 +488,7 @@ void Decoder::DecodeDataProcessing(const Instruction* instr) {
case 6: {
if (instr->Bit(29) == 0x1) {
VisitUnallocated(instr);
VIXL_FALLTHROUGH();
} else {
if (instr->Bit(30) == 0) {
if ((instr->Bit(15) == 0x1) ||
@@ -556,18 +562,15 @@ void Decoder::DecodeDataProcessing(const Instruction* instr) {
void Decoder::DecodeFP(const Instruction* instr) {
VIXL_ASSERT((instr->Bits(27, 24) == 0xE) ||
(instr->Bits(27, 24) == 0xF));
if (instr->Bit(28) == 0) {
DecodeAdvSIMDDataProcessing(instr);
DecodeNEONVectorDataProcessing(instr);
} else {
if (instr->Bit(29) == 1) {
if (instr->Bits(31, 30) == 0x3) {
VisitUnallocated(instr);
} else if (instr->Bits(31, 30) == 0x1) {
DecodeNEONScalarDataProcessing(instr);
} else {
if (instr->Bits(31, 30) == 0x3) {
VisitUnallocated(instr);
} else if (instr->Bits(31, 30) == 0x1) {
DecodeAdvSIMDDataProcessing(instr);
} else {
if (instr->Bit(29) == 0) {
if (instr->Bit(24) == 0) {
if (instr->Bit(21) == 0) {
if ((instr->Bit(23) == 1) ||
@@ -674,23 +677,190 @@ void Decoder::DecodeFP(const Instruction* instr) {
VisitFPDataProcessing3Source(instr);
}
}
} else {
VisitUnallocated(instr);
}
}
}
}
void Decoder::DecodeAdvSIMDLoadStore(const Instruction* instr) {
// TODO: Implement Advanced SIMD load/store instruction decode.
void Decoder::DecodeNEONLoadStore(const Instruction* instr) {
VIXL_ASSERT(instr->Bits(29, 25) == 0x6);
VisitUnimplemented(instr);
if (instr->Bit(31) == 0) {
if ((instr->Bit(24) == 0) && (instr->Bit(21) == 1)) {
VisitUnallocated(instr);
return;
}
if (instr->Bit(23) == 0) {
if (instr->Bits(20, 16) == 0) {
if (instr->Bit(24) == 0) {
VisitNEONLoadStoreMultiStruct(instr);
} else {
VisitNEONLoadStoreSingleStruct(instr);
}
} else {
VisitUnallocated(instr);
}
} else {
if (instr->Bit(24) == 0) {
VisitNEONLoadStoreMultiStructPostIndex(instr);
} else {
VisitNEONLoadStoreSingleStructPostIndex(instr);
}
}
} else {
VisitUnallocated(instr);
}
}
void Decoder::DecodeAdvSIMDDataProcessing(const Instruction* instr) {
// TODO: Implement Advanced SIMD data processing instruction decode.
VIXL_ASSERT(instr->Bits(27, 25) == 0x7);
VisitUnimplemented(instr);
void Decoder::DecodeNEONVectorDataProcessing(const Instruction* instr) {
VIXL_ASSERT(instr->Bits(28, 25) == 0x7);
if (instr->Bit(31) == 0) {
if (instr->Bit(24) == 0) {
if (instr->Bit(21) == 0) {
if (instr->Bit(15) == 0) {
if (instr->Bit(10) == 0) {
if (instr->Bit(29) == 0) {
if (instr->Bit(11) == 0) {
VisitNEONTable(instr);
} else {
VisitNEONPerm(instr);
}
} else {
VisitNEONExtract(instr);
}
} else {
if (instr->Bits(23, 22) == 0) {
VisitNEONCopy(instr);
} else {
VisitUnallocated(instr);
}
}
} else {
VisitUnallocated(instr);
}
} else {
if (instr->Bit(10) == 0) {
if (instr->Bit(11) == 0) {
VisitNEON3Different(instr);
} else {
if (instr->Bits(18, 17) == 0) {
if (instr->Bit(20) == 0) {
if (instr->Bit(19) == 0) {
VisitNEON2RegMisc(instr);
} else {
if (instr->Bits(30, 29) == 0x2) {
VisitCryptoAES(instr);
} else {
VisitUnallocated(instr);
}
}
} else {
if (instr->Bit(19) == 0) {
VisitNEONAcrossLanes(instr);
} else {
VisitUnallocated(instr);
}
}
} else {
VisitUnallocated(instr);
}
}
} else {
VisitNEON3Same(instr);
}
}
} else {
if (instr->Bit(10) == 0) {
VisitNEONByIndexedElement(instr);
} else {
if (instr->Bit(23) == 0) {
if (instr->Bits(22, 19) == 0) {
VisitNEONModifiedImmediate(instr);
} else {
VisitNEONShiftImmediate(instr);
}
} else {
VisitUnallocated(instr);
}
}
}
} else {
VisitUnallocated(instr);
}
}
void Decoder::DecodeNEONScalarDataProcessing(const Instruction* instr) {
VIXL_ASSERT(instr->Bits(28, 25) == 0xF);
if (instr->Bit(24) == 0) {
if (instr->Bit(21) == 0) {
if (instr->Bit(15) == 0) {
if (instr->Bit(10) == 0) {
if (instr->Bit(29) == 0) {
if (instr->Bit(11) == 0) {
VisitCrypto3RegSHA(instr);
} else {
VisitUnallocated(instr);
}
} else {
VisitUnallocated(instr);
}
} else {
if (instr->Bits(23, 22) == 0) {
VisitNEONScalarCopy(instr);
} else {
VisitUnallocated(instr);
}
}
} else {
VisitUnallocated(instr);
}
} else {
if (instr->Bit(10) == 0) {
if (instr->Bit(11) == 0) {
VisitNEONScalar3Diff(instr);
} else {
if (instr->Bits(18, 17) == 0) {
if (instr->Bit(20) == 0) {
if (instr->Bit(19) == 0) {
VisitNEONScalar2RegMisc(instr);
} else {
if (instr->Bit(29) == 0) {
VisitCrypto2RegSHA(instr);
} else {
VisitUnallocated(instr);
}
}
} else {
if (instr->Bit(19) == 0) {
VisitNEONScalarPairwise(instr);
} else {
VisitUnallocated(instr);
}
}
} else {
VisitUnallocated(instr);
}
}
} else {
VisitNEONScalar3Same(instr);
}
}
} else {
if (instr->Bit(10) == 0) {
VisitNEONScalarByIndexedElement(instr);
} else {
if (instr->Bit(23) == 0) {
VisitNEONScalarShiftImmediate(instr);
} else {
VisitUnallocated(instr);
}
}
}
}

View File

@@ -1,4 +1,4 @@
// Copyright 2013, ARM Limited
// Copyright 2014, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
@@ -29,13 +29,13 @@
#include <list>
#include "globals.h"
#include "a64/instructions-a64.h"
#include "vixl/globals.h"
#include "vixl/a64/instructions-a64.h"
// List macro containing all visitors needed by the decoder class.
#define VISITOR_LIST(V) \
#define VISITOR_LIST_THAT_RETURN(V) \
V(PCRelAddressing) \
V(AddSubImmediate) \
V(LogicalImmediate) \
@@ -79,8 +79,39 @@
V(FPDataProcessing3Source) \
V(FPIntegerConvert) \
V(FPFixedPointConvert) \
V(Unallocated) \
V(Unimplemented)
V(Crypto2RegSHA) \
V(Crypto3RegSHA) \
V(CryptoAES) \
V(NEON2RegMisc) \
V(NEON3Different) \
V(NEON3Same) \
V(NEONAcrossLanes) \
V(NEONByIndexedElement) \
V(NEONCopy) \
V(NEONExtract) \
V(NEONLoadStoreMultiStruct) \
V(NEONLoadStoreMultiStructPostIndex) \
V(NEONLoadStoreSingleStruct) \
V(NEONLoadStoreSingleStructPostIndex) \
V(NEONModifiedImmediate) \
V(NEONScalar2RegMisc) \
V(NEONScalar3Diff) \
V(NEONScalar3Same) \
V(NEONScalarByIndexedElement) \
V(NEONScalarCopy) \
V(NEONScalarPairwise) \
V(NEONScalarShiftImmediate) \
V(NEONShiftImmediate) \
V(NEONTable) \
V(NEONPerm) \
#define VISITOR_LIST_THAT_DONT_RETURN(V) \
V(Unallocated) \
V(Unimplemented) \
#define VISITOR_LIST(V) \
VISITOR_LIST_THAT_RETURN(V) \
VISITOR_LIST_THAT_DONT_RETURN(V) \
namespace vixl {
@@ -222,12 +253,17 @@ class Decoder {
// Decode the Advanced SIMD (NEON) load/store part of the instruction tree,
// and call the corresponding visitors.
// On entry, instruction bits 29:25 = 0x6.
void DecodeAdvSIMDLoadStore(const Instruction* instr);
void DecodeNEONLoadStore(const Instruction* instr);
// Decode the Advanced SIMD (NEON) data processing part of the instruction
// tree, and call the corresponding visitors.
// On entry, instruction bits 27:25 = 0x7.
void DecodeAdvSIMDDataProcessing(const Instruction* instr);
// Decode the Advanced SIMD (NEON) vector data processing part of the
// instruction tree, and call the corresponding visitors.
// On entry, instruction bits 28:25 = 0x7.
void DecodeNEONVectorDataProcessing(const Instruction* instr);
// Decode the Advanced SIMD (NEON) scalar data processing part of the
// instruction tree, and call the corresponding visitors.
// On entry, instruction bits 28:25 = 0xF.
void DecodeNEONScalarDataProcessing(const Instruction* instr);
private:
// Visitors are registered in a list.

File diff suppressed because it is too large Load Diff

View File

@@ -1,4 +1,4 @@
// Copyright 2013, ARM Limited
// Copyright 2015, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
@@ -27,11 +27,11 @@
#ifndef VIXL_A64_DISASM_A64_H
#define VIXL_A64_DISASM_A64_H
#include "globals.h"
#include "utils.h"
#include "instructions-a64.h"
#include "decoder-a64.h"
#include "assembler-a64.h"
#include "vixl/globals.h"
#include "vixl/utils.h"
#include "vixl/a64/instructions-a64.h"
#include "vixl/a64/decoder-a64.h"
#include "vixl/a64/assembler-a64.h"
namespace vixl {
@@ -55,6 +55,7 @@ class Disassembler: public DecoderVisitor {
// customize the disassembly output.
// Prints the name of a register.
// TODO: This currently doesn't allow renaming of V registers.
virtual void AppendRegisterNameToOutput(const Instruction* instr,
const CPURegister& reg);
@@ -122,7 +123,8 @@ class Disassembler: public DecoderVisitor {
int SubstituteLSRegOffsetField(const Instruction* instr, const char* format);
int SubstitutePrefetchField(const Instruction* instr, const char* format);
int SubstituteBarrierField(const Instruction* instr, const char* format);
int SubstituteSysOpField(const Instruction* instr, const char* format);
int SubstituteCrField(const Instruction* instr, const char* format);
bool RdIsZROrSP(const Instruction* instr) const {
return (instr->Rd() == kZeroRegCode);
}
@@ -163,7 +165,6 @@ class Disassembler: public DecoderVisitor {
class PrintDisassembler: public Disassembler {
public:
explicit PrintDisassembler(FILE* stream) : stream_(stream) { }
virtual ~PrintDisassembler() { }
protected:
virtual void ProcessOutput(const Instruction* instr);

View File

@@ -0,0 +1,622 @@
// Copyright 2015, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of ARM Limited nor the names of its contributors may be
// used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include "vixl/a64/instructions-a64.h"
#include "vixl/a64/assembler-a64.h"
namespace vixl {
// Floating-point infinity values.
const float16 kFP16PositiveInfinity = 0x7c00;
const float16 kFP16NegativeInfinity = 0xfc00;
const float kFP32PositiveInfinity = rawbits_to_float(0x7f800000);
const float kFP32NegativeInfinity = rawbits_to_float(0xff800000);
const double kFP64PositiveInfinity =
rawbits_to_double(UINT64_C(0x7ff0000000000000));
const double kFP64NegativeInfinity =
rawbits_to_double(UINT64_C(0xfff0000000000000));
// The default NaN values (for FPCR.DN=1).
const double kFP64DefaultNaN = rawbits_to_double(UINT64_C(0x7ff8000000000000));
const float kFP32DefaultNaN = rawbits_to_float(0x7fc00000);
const float16 kFP16DefaultNaN = 0x7e00;
static uint64_t RotateRight(uint64_t value,
unsigned int rotate,
unsigned int width) {
VIXL_ASSERT(width <= 64);
rotate &= 63;
return ((value & ((UINT64_C(1) << rotate) - 1)) <<
(width - rotate)) | (value >> rotate);
}
static uint64_t RepeatBitsAcrossReg(unsigned reg_size,
uint64_t value,
unsigned width) {
VIXL_ASSERT((width == 2) || (width == 4) || (width == 8) || (width == 16) ||
(width == 32));
VIXL_ASSERT((reg_size == kWRegSize) || (reg_size == kXRegSize));
uint64_t result = value & ((UINT64_C(1) << width) - 1);
for (unsigned i = width; i < reg_size; i *= 2) {
result |= (result << i);
}
return result;
}
bool Instruction::IsLoad() const {
if (Mask(LoadStoreAnyFMask) != LoadStoreAnyFixed) {
return false;
}
if (Mask(LoadStorePairAnyFMask) == LoadStorePairAnyFixed) {
return Mask(LoadStorePairLBit) != 0;
} else {
LoadStoreOp op = static_cast<LoadStoreOp>(Mask(LoadStoreMask));
switch (op) {
case LDRB_w:
case LDRH_w:
case LDR_w:
case LDR_x:
case LDRSB_w:
case LDRSB_x:
case LDRSH_w:
case LDRSH_x:
case LDRSW_x:
case LDR_b:
case LDR_h:
case LDR_s:
case LDR_d:
case LDR_q: return true;
default: return false;
}
}
}
bool Instruction::IsStore() const {
if (Mask(LoadStoreAnyFMask) != LoadStoreAnyFixed) {
return false;
}
if (Mask(LoadStorePairAnyFMask) == LoadStorePairAnyFixed) {
return Mask(LoadStorePairLBit) == 0;
} else {
LoadStoreOp op = static_cast<LoadStoreOp>(Mask(LoadStoreMask));
switch (op) {
case STRB_w:
case STRH_w:
case STR_w:
case STR_x:
case STR_b:
case STR_h:
case STR_s:
case STR_d:
case STR_q: return true;
default: return false;
}
}
}
// Logical immediates can't encode zero, so a return value of zero is used to
// indicate a failure case. Specifically, where the constraints on imm_s are
// not met.
uint64_t Instruction::ImmLogical() const {
unsigned reg_size = SixtyFourBits() ? kXRegSize : kWRegSize;
int32_t n = BitN();
int32_t imm_s = ImmSetBits();
int32_t imm_r = ImmRotate();
// An integer is constructed from the n, imm_s and imm_r bits according to
// the following table:
//
// N imms immr size S R
// 1 ssssss rrrrrr 64 UInt(ssssss) UInt(rrrrrr)
// 0 0sssss xrrrrr 32 UInt(sssss) UInt(rrrrr)
// 0 10ssss xxrrrr 16 UInt(ssss) UInt(rrrr)
// 0 110sss xxxrrr 8 UInt(sss) UInt(rrr)
// 0 1110ss xxxxrr 4 UInt(ss) UInt(rr)
// 0 11110s xxxxxr 2 UInt(s) UInt(r)
// (s bits must not be all set)
//
// A pattern is constructed of size bits, where the least significant S+1
// bits are set. The pattern is rotated right by R, and repeated across a
// 32 or 64-bit value, depending on destination register width.
//
if (n == 1) {
if (imm_s == 0x3f) {
return 0;
}
uint64_t bits = (UINT64_C(1) << (imm_s + 1)) - 1;
return RotateRight(bits, imm_r, 64);
} else {
if ((imm_s >> 1) == 0x1f) {
return 0;
}
for (int width = 0x20; width >= 0x2; width >>= 1) {
if ((imm_s & width) == 0) {
int mask = width - 1;
if ((imm_s & mask) == mask) {
return 0;
}
uint64_t bits = (UINT64_C(1) << ((imm_s & mask) + 1)) - 1;
return RepeatBitsAcrossReg(reg_size,
RotateRight(bits, imm_r & mask, width),
width);
}
}
}
VIXL_UNREACHABLE();
return 0;
}
uint32_t Instruction::ImmNEONabcdefgh() const {
return ImmNEONabc() << 5 | ImmNEONdefgh();
}
float Instruction::Imm8ToFP32(uint32_t imm8) {
// Imm8: abcdefgh (8 bits)
// Single: aBbb.bbbc.defg.h000.0000.0000.0000.0000 (32 bits)
// where B is b ^ 1
uint32_t bits = imm8;
uint32_t bit7 = (bits >> 7) & 0x1;
uint32_t bit6 = (bits >> 6) & 0x1;
uint32_t bit5_to_0 = bits & 0x3f;
uint32_t result = (bit7 << 31) | ((32 - bit6) << 25) | (bit5_to_0 << 19);
return rawbits_to_float(result);
}
float Instruction::ImmFP32() const {
return Imm8ToFP32(ImmFP());
}
double Instruction::Imm8ToFP64(uint32_t imm8) {
// Imm8: abcdefgh (8 bits)
// Double: aBbb.bbbb.bbcd.efgh.0000.0000.0000.0000
// 0000.0000.0000.0000.0000.0000.0000.0000 (64 bits)
// where B is b ^ 1
uint32_t bits = imm8;
uint64_t bit7 = (bits >> 7) & 0x1;
uint64_t bit6 = (bits >> 6) & 0x1;
uint64_t bit5_to_0 = bits & 0x3f;
uint64_t result = (bit7 << 63) | ((256 - bit6) << 54) | (bit5_to_0 << 48);
return rawbits_to_double(result);
}
double Instruction::ImmFP64() const {
return Imm8ToFP64(ImmFP());
}
float Instruction::ImmNEONFP32() const {
return Imm8ToFP32(ImmNEONabcdefgh());
}
double Instruction::ImmNEONFP64() const {
return Imm8ToFP64(ImmNEONabcdefgh());
}
unsigned CalcLSDataSize(LoadStoreOp op) {
VIXL_ASSERT((LSSize_offset + LSSize_width) == (kInstructionSize * 8));
unsigned size = static_cast<Instr>(op) >> LSSize_offset;
if ((op & LSVector_mask) != 0) {
// Vector register memory operations encode the access size in the "size"
// and "opc" fields.
if ((size == 0) && ((op & LSOpc_mask) >> LSOpc_offset) >= 2) {
size = kQRegSizeInBytesLog2;
}
}
return size;
}
unsigned CalcLSPairDataSize(LoadStorePairOp op) {
VIXL_STATIC_ASSERT(kXRegSizeInBytes == kDRegSizeInBytes);
VIXL_STATIC_ASSERT(kWRegSizeInBytes == kSRegSizeInBytes);
switch (op) {
case STP_q:
case LDP_q: return kQRegSizeInBytesLog2;
case STP_x:
case LDP_x:
case STP_d:
case LDP_d: return kXRegSizeInBytesLog2;
default: return kWRegSizeInBytesLog2;
}
}
int Instruction::ImmBranchRangeBitwidth(ImmBranchType branch_type) {
switch (branch_type) {
case UncondBranchType:
return ImmUncondBranch_width;
case CondBranchType:
return ImmCondBranch_width;
case CompareBranchType:
return ImmCmpBranch_width;
case TestBranchType:
return ImmTestBranch_width;
default:
VIXL_UNREACHABLE();
return 0;
}
}
int32_t Instruction::ImmBranchForwardRange(ImmBranchType branch_type) {
int32_t encoded_max = 1 << (ImmBranchRangeBitwidth(branch_type) - 1);
return encoded_max * kInstructionSize;
}
bool Instruction::IsValidImmPCOffset(ImmBranchType branch_type,
int64_t offset) {
return is_intn(ImmBranchRangeBitwidth(branch_type), offset);
}
const Instruction* Instruction::ImmPCOffsetTarget() const {
const Instruction * base = this;
ptrdiff_t offset;
if (IsPCRelAddressing()) {
// ADR and ADRP.
offset = ImmPCRel();
if (Mask(PCRelAddressingMask) == ADRP) {
base = AlignDown(base, kPageSize);
offset *= kPageSize;
} else {
VIXL_ASSERT(Mask(PCRelAddressingMask) == ADR);
}
} else {
// All PC-relative branches.
VIXL_ASSERT(BranchType() != UnknownBranchType);
// Relative branch offsets are instruction-size-aligned.
offset = ImmBranch() << kInstructionSizeLog2;
}
return base + offset;
}
int Instruction::ImmBranch() const {
switch (BranchType()) {
case CondBranchType: return ImmCondBranch();
case UncondBranchType: return ImmUncondBranch();
case CompareBranchType: return ImmCmpBranch();
case TestBranchType: return ImmTestBranch();
default: VIXL_UNREACHABLE();
}
return 0;
}
void Instruction::SetImmPCOffsetTarget(const Instruction* target) {
if (IsPCRelAddressing()) {
SetPCRelImmTarget(target);
} else {
SetBranchImmTarget(target);
}
}
void Instruction::SetPCRelImmTarget(const Instruction* target) {
ptrdiff_t imm21;
if ((Mask(PCRelAddressingMask) == ADR)) {
imm21 = target - this;
} else {
VIXL_ASSERT(Mask(PCRelAddressingMask) == ADRP);
uintptr_t this_page = reinterpret_cast<uintptr_t>(this) / kPageSize;
uintptr_t target_page = reinterpret_cast<uintptr_t>(target) / kPageSize;
imm21 = target_page - this_page;
}
Instr imm = Assembler::ImmPCRelAddress(static_cast<int32_t>(imm21));
SetInstructionBits(Mask(~ImmPCRel_mask) | imm);
}
void Instruction::SetBranchImmTarget(const Instruction* target) {
VIXL_ASSERT(((target - this) & 3) == 0);
Instr branch_imm = 0;
uint32_t imm_mask = 0;
int offset = static_cast<int>((target - this) >> kInstructionSizeLog2);
switch (BranchType()) {
case CondBranchType: {
branch_imm = Assembler::ImmCondBranch(offset);
imm_mask = ImmCondBranch_mask;
break;
}
case UncondBranchType: {
branch_imm = Assembler::ImmUncondBranch(offset);
imm_mask = ImmUncondBranch_mask;
break;
}
case CompareBranchType: {
branch_imm = Assembler::ImmCmpBranch(offset);
imm_mask = ImmCmpBranch_mask;
break;
}
case TestBranchType: {
branch_imm = Assembler::ImmTestBranch(offset);
imm_mask = ImmTestBranch_mask;
break;
}
default: VIXL_UNREACHABLE();
}
SetInstructionBits(Mask(~imm_mask) | branch_imm);
}
void Instruction::SetImmLLiteral(const Instruction* source) {
VIXL_ASSERT(IsWordAligned(source));
ptrdiff_t offset = (source - this) >> kLiteralEntrySizeLog2;
Instr imm = Assembler::ImmLLiteral(static_cast<int>(offset));
Instr mask = ImmLLiteral_mask;
SetInstructionBits(Mask(~mask) | imm);
}
VectorFormat VectorFormatHalfWidth(const VectorFormat vform) {
VIXL_ASSERT(vform == kFormat8H || vform == kFormat4S || vform == kFormat2D ||
vform == kFormatH || vform == kFormatS || vform == kFormatD);
switch (vform) {
case kFormat8H: return kFormat8B;
case kFormat4S: return kFormat4H;
case kFormat2D: return kFormat2S;
case kFormatH: return kFormatB;
case kFormatS: return kFormatH;
case kFormatD: return kFormatS;
default: VIXL_UNREACHABLE(); return kFormatUndefined;
}
}
VectorFormat VectorFormatDoubleWidth(const VectorFormat vform) {
VIXL_ASSERT(vform == kFormat8B || vform == kFormat4H || vform == kFormat2S ||
vform == kFormatB || vform == kFormatH || vform == kFormatS);
switch (vform) {
case kFormat8B: return kFormat8H;
case kFormat4H: return kFormat4S;
case kFormat2S: return kFormat2D;
case kFormatB: return kFormatH;
case kFormatH: return kFormatS;
case kFormatS: return kFormatD;
default: VIXL_UNREACHABLE(); return kFormatUndefined;
}
}
VectorFormat VectorFormatFillQ(const VectorFormat vform) {
switch (vform) {
case kFormatB:
case kFormat8B:
case kFormat16B: return kFormat16B;
case kFormatH:
case kFormat4H:
case kFormat8H: return kFormat8H;
case kFormatS:
case kFormat2S:
case kFormat4S: return kFormat4S;
case kFormatD:
case kFormat1D:
case kFormat2D: return kFormat2D;
default: VIXL_UNREACHABLE(); return kFormatUndefined;
}
}
VectorFormat VectorFormatHalfWidthDoubleLanes(const VectorFormat vform) {
switch (vform) {
case kFormat4H: return kFormat8B;
case kFormat8H: return kFormat16B;
case kFormat2S: return kFormat4H;
case kFormat4S: return kFormat8H;
case kFormat1D: return kFormat2S;
case kFormat2D: return kFormat4S;
default: VIXL_UNREACHABLE(); return kFormatUndefined;
}
}
VectorFormat VectorFormatDoubleLanes(const VectorFormat vform) {
VIXL_ASSERT(vform == kFormat8B || vform == kFormat4H || vform == kFormat2S);
switch (vform) {
case kFormat8B: return kFormat16B;
case kFormat4H: return kFormat8H;
case kFormat2S: return kFormat4S;
default: VIXL_UNREACHABLE(); return kFormatUndefined;
}
}
VectorFormat VectorFormatHalfLanes(const VectorFormat vform) {
VIXL_ASSERT(vform == kFormat16B || vform == kFormat8H || vform == kFormat4S);
switch (vform) {
case kFormat16B: return kFormat8B;
case kFormat8H: return kFormat4H;
case kFormat4S: return kFormat2S;
default: VIXL_UNREACHABLE(); return kFormatUndefined;
}
}
VectorFormat ScalarFormatFromLaneSize(int laneSize) {
switch (laneSize) {
case 8: return kFormatB;
case 16: return kFormatH;
case 32: return kFormatS;
case 64: return kFormatD;
default: VIXL_UNREACHABLE(); return kFormatUndefined;
}
}
unsigned RegisterSizeInBitsFromFormat(VectorFormat vform) {
VIXL_ASSERT(vform != kFormatUndefined);
switch (vform) {
case kFormatB: return kBRegSize;
case kFormatH: return kHRegSize;
case kFormatS: return kSRegSize;
case kFormatD: return kDRegSize;
case kFormat8B:
case kFormat4H:
case kFormat2S:
case kFormat1D: return kDRegSize;
default: return kQRegSize;
}
}
unsigned RegisterSizeInBytesFromFormat(VectorFormat vform) {
return RegisterSizeInBitsFromFormat(vform) / 8;
}
unsigned LaneSizeInBitsFromFormat(VectorFormat vform) {
VIXL_ASSERT(vform != kFormatUndefined);
switch (vform) {
case kFormatB:
case kFormat8B:
case kFormat16B: return 8;
case kFormatH:
case kFormat4H:
case kFormat8H: return 16;
case kFormatS:
case kFormat2S:
case kFormat4S: return 32;
case kFormatD:
case kFormat1D:
case kFormat2D: return 64;
default: VIXL_UNREACHABLE(); return 0;
}
}
int LaneSizeInBytesFromFormat(VectorFormat vform) {
return LaneSizeInBitsFromFormat(vform) / 8;
}
int LaneSizeInBytesLog2FromFormat(VectorFormat vform) {
VIXL_ASSERT(vform != kFormatUndefined);
switch (vform) {
case kFormatB:
case kFormat8B:
case kFormat16B: return 0;
case kFormatH:
case kFormat4H:
case kFormat8H: return 1;
case kFormatS:
case kFormat2S:
case kFormat4S: return 2;
case kFormatD:
case kFormat1D:
case kFormat2D: return 3;
default: VIXL_UNREACHABLE(); return 0;
}
}
int LaneCountFromFormat(VectorFormat vform) {
VIXL_ASSERT(vform != kFormatUndefined);
switch (vform) {
case kFormat16B: return 16;
case kFormat8B:
case kFormat8H: return 8;
case kFormat4H:
case kFormat4S: return 4;
case kFormat2S:
case kFormat2D: return 2;
case kFormat1D:
case kFormatB:
case kFormatH:
case kFormatS:
case kFormatD: return 1;
default: VIXL_UNREACHABLE(); return 0;
}
}
int MaxLaneCountFromFormat(VectorFormat vform) {
VIXL_ASSERT(vform != kFormatUndefined);
switch (vform) {
case kFormatB:
case kFormat8B:
case kFormat16B: return 16;
case kFormatH:
case kFormat4H:
case kFormat8H: return 8;
case kFormatS:
case kFormat2S:
case kFormat4S: return 4;
case kFormatD:
case kFormat1D:
case kFormat2D: return 2;
default: VIXL_UNREACHABLE(); return 0;
}
}
// Does 'vform' indicate a vector format or a scalar format?
bool IsVectorFormat(VectorFormat vform) {
VIXL_ASSERT(vform != kFormatUndefined);
switch (vform) {
case kFormatB:
case kFormatH:
case kFormatS:
case kFormatD: return false;
default: return true;
}
}
int64_t MaxIntFromFormat(VectorFormat vform) {
return INT64_MAX >> (64 - LaneSizeInBitsFromFormat(vform));
}
int64_t MinIntFromFormat(VectorFormat vform) {
return INT64_MIN >> (64 - LaneSizeInBitsFromFormat(vform));
}
uint64_t MaxUintFromFormat(VectorFormat vform) {
return UINT64_MAX >> (64 - LaneSizeInBitsFromFormat(vform));
}
} // namespace vixl

View File

@@ -0,0 +1,757 @@
// Copyright 2015, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of ARM Limited nor the names of its contributors may be
// used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#ifndef VIXL_A64_INSTRUCTIONS_A64_H_
#define VIXL_A64_INSTRUCTIONS_A64_H_
#include "vixl/globals.h"
#include "vixl/utils.h"
#include "vixl/a64/constants-a64.h"
namespace vixl {
// ISA constants. --------------------------------------------------------------
typedef uint32_t Instr;
const unsigned kInstructionSize = 4;
const unsigned kInstructionSizeLog2 = 2;
const unsigned kLiteralEntrySize = 4;
const unsigned kLiteralEntrySizeLog2 = 2;
const unsigned kMaxLoadLiteralRange = 1 * MBytes;
// This is the nominal page size (as used by the adrp instruction); the actual
// size of the memory pages allocated by the kernel is likely to differ.
const unsigned kPageSize = 4 * KBytes;
const unsigned kPageSizeLog2 = 12;
const unsigned kBRegSize = 8;
const unsigned kBRegSizeLog2 = 3;
const unsigned kBRegSizeInBytes = kBRegSize / 8;
const unsigned kBRegSizeInBytesLog2 = kBRegSizeLog2 - 3;
const unsigned kHRegSize = 16;
const unsigned kHRegSizeLog2 = 4;
const unsigned kHRegSizeInBytes = kHRegSize / 8;
const unsigned kHRegSizeInBytesLog2 = kHRegSizeLog2 - 3;
const unsigned kWRegSize = 32;
const unsigned kWRegSizeLog2 = 5;
const unsigned kWRegSizeInBytes = kWRegSize / 8;
const unsigned kWRegSizeInBytesLog2 = kWRegSizeLog2 - 3;
const unsigned kXRegSize = 64;
const unsigned kXRegSizeLog2 = 6;
const unsigned kXRegSizeInBytes = kXRegSize / 8;
const unsigned kXRegSizeInBytesLog2 = kXRegSizeLog2 - 3;
const unsigned kSRegSize = 32;
const unsigned kSRegSizeLog2 = 5;
const unsigned kSRegSizeInBytes = kSRegSize / 8;
const unsigned kSRegSizeInBytesLog2 = kSRegSizeLog2 - 3;
const unsigned kDRegSize = 64;
const unsigned kDRegSizeLog2 = 6;
const unsigned kDRegSizeInBytes = kDRegSize / 8;
const unsigned kDRegSizeInBytesLog2 = kDRegSizeLog2 - 3;
const unsigned kQRegSize = 128;
const unsigned kQRegSizeLog2 = 7;
const unsigned kQRegSizeInBytes = kQRegSize / 8;
const unsigned kQRegSizeInBytesLog2 = kQRegSizeLog2 - 3;
const uint64_t kWRegMask = UINT64_C(0xffffffff);
const uint64_t kXRegMask = UINT64_C(0xffffffffffffffff);
const uint64_t kSRegMask = UINT64_C(0xffffffff);
const uint64_t kDRegMask = UINT64_C(0xffffffffffffffff);
const uint64_t kSSignMask = UINT64_C(0x80000000);
const uint64_t kDSignMask = UINT64_C(0x8000000000000000);
const uint64_t kWSignMask = UINT64_C(0x80000000);
const uint64_t kXSignMask = UINT64_C(0x8000000000000000);
const uint64_t kByteMask = UINT64_C(0xff);
const uint64_t kHalfWordMask = UINT64_C(0xffff);
const uint64_t kWordMask = UINT64_C(0xffffffff);
const uint64_t kXMaxUInt = UINT64_C(0xffffffffffffffff);
const uint64_t kWMaxUInt = UINT64_C(0xffffffff);
const int64_t kXMaxInt = INT64_C(0x7fffffffffffffff);
const int64_t kXMinInt = INT64_C(0x8000000000000000);
const int32_t kWMaxInt = INT32_C(0x7fffffff);
const int32_t kWMinInt = INT32_C(0x80000000);
const unsigned kLinkRegCode = 30;
const unsigned kZeroRegCode = 31;
const unsigned kSPRegInternalCode = 63;
const unsigned kRegCodeMask = 0x1f;
const unsigned kAddressTagOffset = 56;
const unsigned kAddressTagWidth = 8;
const uint64_t kAddressTagMask =
((UINT64_C(1) << kAddressTagWidth) - 1) << kAddressTagOffset;
VIXL_STATIC_ASSERT(kAddressTagMask == UINT64_C(0xff00000000000000));
// AArch64 floating-point specifics. These match IEEE-754.
const unsigned kDoubleMantissaBits = 52;
const unsigned kDoubleExponentBits = 11;
const unsigned kFloatMantissaBits = 23;
const unsigned kFloatExponentBits = 8;
const unsigned kFloat16MantissaBits = 10;
const unsigned kFloat16ExponentBits = 5;
// Floating-point infinity values.
extern const float16 kFP16PositiveInfinity;
extern const float16 kFP16NegativeInfinity;
extern const float kFP32PositiveInfinity;
extern const float kFP32NegativeInfinity;
extern const double kFP64PositiveInfinity;
extern const double kFP64NegativeInfinity;
// The default NaN values (for FPCR.DN=1).
extern const float16 kFP16DefaultNaN;
extern const float kFP32DefaultNaN;
extern const double kFP64DefaultNaN;
unsigned CalcLSDataSize(LoadStoreOp op);
unsigned CalcLSPairDataSize(LoadStorePairOp op);
enum ImmBranchType {
UnknownBranchType = 0,
CondBranchType = 1,
UncondBranchType = 2,
CompareBranchType = 3,
TestBranchType = 4
};
enum AddrMode {
Offset,
PreIndex,
PostIndex
};
enum FPRounding {
// The first four values are encodable directly by FPCR<RMode>.
FPTieEven = 0x0,
FPPositiveInfinity = 0x1,
FPNegativeInfinity = 0x2,
FPZero = 0x3,
// The final rounding modes are only available when explicitly specified by
// the instruction (such as with fcvta). It cannot be set in FPCR.
FPTieAway,
FPRoundOdd
};
enum Reg31Mode {
Reg31IsStackPointer,
Reg31IsZeroRegister
};
// Instructions. ---------------------------------------------------------------
class Instruction {
public:
Instr InstructionBits() const {
return *(reinterpret_cast<const Instr*>(this));
}
void SetInstructionBits(Instr new_instr) {
*(reinterpret_cast<Instr*>(this)) = new_instr;
}
int Bit(int pos) const {
return (InstructionBits() >> pos) & 1;
}
uint32_t Bits(int msb, int lsb) const {
return unsigned_bitextract_32(msb, lsb, InstructionBits());
}
int32_t SignedBits(int msb, int lsb) const {
int32_t bits = *(reinterpret_cast<const int32_t*>(this));
return signed_bitextract_32(msb, lsb, bits);
}
Instr Mask(uint32_t mask) const {
return InstructionBits() & mask;
}
#define DEFINE_GETTER(Name, HighBit, LowBit, Func) \
int32_t Name() const { return Func(HighBit, LowBit); }
INSTRUCTION_FIELDS_LIST(DEFINE_GETTER)
#undef DEFINE_GETTER
// ImmPCRel is a compound field (not present in INSTRUCTION_FIELDS_LIST),
// formed from ImmPCRelLo and ImmPCRelHi.
int ImmPCRel() const {
int offset =
static_cast<int>((ImmPCRelHi() << ImmPCRelLo_width) | ImmPCRelLo());
int width = ImmPCRelLo_width + ImmPCRelHi_width;
return signed_bitextract_32(width - 1, 0, offset);
}
uint64_t ImmLogical() const;
unsigned ImmNEONabcdefgh() const;
float ImmFP32() const;
double ImmFP64() const;
float ImmNEONFP32() const;
double ImmNEONFP64() const;
unsigned SizeLS() const {
return CalcLSDataSize(static_cast<LoadStoreOp>(Mask(LoadStoreMask)));
}
unsigned SizeLSPair() const {
return CalcLSPairDataSize(
static_cast<LoadStorePairOp>(Mask(LoadStorePairMask)));
}
int NEONLSIndex(int access_size_shift) const {
int64_t q = NEONQ();
int64_t s = NEONS();
int64_t size = NEONLSSize();
int64_t index = (q << 3) | (s << 2) | size;
return static_cast<int>(index >> access_size_shift);
}
// Helpers.
bool IsCondBranchImm() const {
return Mask(ConditionalBranchFMask) == ConditionalBranchFixed;
}
bool IsUncondBranchImm() const {
return Mask(UnconditionalBranchFMask) == UnconditionalBranchFixed;
}
bool IsCompareBranch() const {
return Mask(CompareBranchFMask) == CompareBranchFixed;
}
bool IsTestBranch() const {
return Mask(TestBranchFMask) == TestBranchFixed;
}
bool IsImmBranch() const {
return BranchType() != UnknownBranchType;
}
bool IsPCRelAddressing() const {
return Mask(PCRelAddressingFMask) == PCRelAddressingFixed;
}
bool IsLogicalImmediate() const {
return Mask(LogicalImmediateFMask) == LogicalImmediateFixed;
}
bool IsAddSubImmediate() const {
return Mask(AddSubImmediateFMask) == AddSubImmediateFixed;
}
bool IsAddSubExtended() const {
return Mask(AddSubExtendedFMask) == AddSubExtendedFixed;
}
bool IsLoadOrStore() const {
return Mask(LoadStoreAnyFMask) == LoadStoreAnyFixed;
}
bool IsLoad() const;
bool IsStore() const;
bool IsLoadLiteral() const {
// This includes PRFM_lit.
return Mask(LoadLiteralFMask) == LoadLiteralFixed;
}
bool IsMovn() const {
return (Mask(MoveWideImmediateMask) == MOVN_x) ||
(Mask(MoveWideImmediateMask) == MOVN_w);
}
static int ImmBranchRangeBitwidth(ImmBranchType branch_type);
static int32_t ImmBranchForwardRange(ImmBranchType branch_type);
static bool IsValidImmPCOffset(ImmBranchType branch_type, int64_t offset);
// Indicate whether Rd can be the stack pointer or the zero register. This
// does not check that the instruction actually has an Rd field.
Reg31Mode RdMode() const {
// The following instructions use sp or wsp as Rd:
// Add/sub (immediate) when not setting the flags.
// Add/sub (extended) when not setting the flags.
// Logical (immediate) when not setting the flags.
// Otherwise, r31 is the zero register.
if (IsAddSubImmediate() || IsAddSubExtended()) {
if (Mask(AddSubSetFlagsBit)) {
return Reg31IsZeroRegister;
} else {
return Reg31IsStackPointer;
}
}
if (IsLogicalImmediate()) {
// Of the logical (immediate) instructions, only ANDS (and its aliases)
// can set the flags. The others can all write into sp.
// Note that some logical operations are not available to
// immediate-operand instructions, so we have to combine two masks here.
if (Mask(LogicalImmediateMask & LogicalOpMask) == ANDS) {
return Reg31IsZeroRegister;
} else {
return Reg31IsStackPointer;
}
}
return Reg31IsZeroRegister;
}
// Indicate whether Rn can be the stack pointer or the zero register. This
// does not check that the instruction actually has an Rn field.
Reg31Mode RnMode() const {
// The following instructions use sp or wsp as Rn:
// All loads and stores.
// Add/sub (immediate).
// Add/sub (extended).
// Otherwise, r31 is the zero register.
if (IsLoadOrStore() || IsAddSubImmediate() || IsAddSubExtended()) {
return Reg31IsStackPointer;
}
return Reg31IsZeroRegister;
}
ImmBranchType BranchType() const {
if (IsCondBranchImm()) {
return CondBranchType;
} else if (IsUncondBranchImm()) {
return UncondBranchType;
} else if (IsCompareBranch()) {
return CompareBranchType;
} else if (IsTestBranch()) {
return TestBranchType;
} else {
return UnknownBranchType;
}
}
// Find the target of this instruction. 'this' may be a branch or a
// PC-relative addressing instruction.
const Instruction* ImmPCOffsetTarget() const;
// Patch a PC-relative offset to refer to 'target'. 'this' may be a branch or
// a PC-relative addressing instruction.
void SetImmPCOffsetTarget(const Instruction* target);
// Patch a literal load instruction to load from 'source'.
void SetImmLLiteral(const Instruction* source);
// The range of a load literal instruction, expressed as 'instr +- range'.
// The range is actually the 'positive' range; the branch instruction can
// target [instr - range - kInstructionSize, instr + range].
static const int kLoadLiteralImmBitwidth = 19;
static const int kLoadLiteralRange =
(1 << kLoadLiteralImmBitwidth) / 2 - kInstructionSize;
// Calculate the address of a literal referred to by a load-literal
// instruction, and return it as the specified type.
//
// The literal itself is safely mutable only if the backing buffer is safely
// mutable.
template <typename T>
T LiteralAddress() const {
uint64_t base_raw = reinterpret_cast<uint64_t>(this);
int64_t offset = ImmLLiteral() << kLiteralEntrySizeLog2;
uint64_t address_raw = base_raw + offset;
// Cast the address using a C-style cast. A reinterpret_cast would be
// appropriate, but it can't cast one integral type to another.
T address = (T)(address_raw);
// Assert that the address can be represented by the specified type.
VIXL_ASSERT((uint64_t)(address) == address_raw);
return address;
}
uint32_t Literal32() const {
uint32_t literal;
memcpy(&literal, LiteralAddress<const void*>(), sizeof(literal));
return literal;
}
uint64_t Literal64() const {
uint64_t literal;
memcpy(&literal, LiteralAddress<const void*>(), sizeof(literal));
return literal;
}
float LiteralFP32() const {
return rawbits_to_float(Literal32());
}
double LiteralFP64() const {
return rawbits_to_double(Literal64());
}
const Instruction* NextInstruction() const {
return this + kInstructionSize;
}
const Instruction* InstructionAtOffset(int64_t offset) const {
VIXL_ASSERT(IsWordAligned(this + offset));
return this + offset;
}
template<typename T> static Instruction* Cast(T src) {
return reinterpret_cast<Instruction*>(src);
}
template<typename T> static const Instruction* CastConst(T src) {
return reinterpret_cast<const Instruction*>(src);
}
private:
int ImmBranch() const;
static float Imm8ToFP32(uint32_t imm8);
static double Imm8ToFP64(uint32_t imm8);
void SetPCRelImmTarget(const Instruction* target);
void SetBranchImmTarget(const Instruction* target);
};
// Functions for handling NEON vector format information.
enum VectorFormat {
kFormatUndefined = 0xffffffff,
kFormat8B = NEON_8B,
kFormat16B = NEON_16B,
kFormat4H = NEON_4H,
kFormat8H = NEON_8H,
kFormat2S = NEON_2S,
kFormat4S = NEON_4S,
kFormat1D = NEON_1D,
kFormat2D = NEON_2D,
// Scalar formats. We add the scalar bit to distinguish between scalar and
// vector enumerations; the bit is always set in the encoding of scalar ops
// and always clear for vector ops. Although kFormatD and kFormat1D appear
// to be the same, their meaning is subtly different. The first is a scalar
// operation, the second a vector operation that only affects one lane.
kFormatB = NEON_B | NEONScalar,
kFormatH = NEON_H | NEONScalar,
kFormatS = NEON_S | NEONScalar,
kFormatD = NEON_D | NEONScalar
};
VectorFormat VectorFormatHalfWidth(const VectorFormat vform);
VectorFormat VectorFormatDoubleWidth(const VectorFormat vform);
VectorFormat VectorFormatDoubleLanes(const VectorFormat vform);
VectorFormat VectorFormatHalfLanes(const VectorFormat vform);
VectorFormat ScalarFormatFromLaneSize(int lanesize);
VectorFormat VectorFormatHalfWidthDoubleLanes(const VectorFormat vform);
VectorFormat VectorFormatFillQ(const VectorFormat vform);
unsigned RegisterSizeInBitsFromFormat(VectorFormat vform);
unsigned RegisterSizeInBytesFromFormat(VectorFormat vform);
// TODO: Make the return types of these functions consistent.
unsigned LaneSizeInBitsFromFormat(VectorFormat vform);
int LaneSizeInBytesFromFormat(VectorFormat vform);
int LaneSizeInBytesLog2FromFormat(VectorFormat vform);
int LaneCountFromFormat(VectorFormat vform);
int MaxLaneCountFromFormat(VectorFormat vform);
bool IsVectorFormat(VectorFormat vform);
int64_t MaxIntFromFormat(VectorFormat vform);
int64_t MinIntFromFormat(VectorFormat vform);
uint64_t MaxUintFromFormat(VectorFormat vform);
enum NEONFormat {
NF_UNDEF = 0,
NF_8B = 1,
NF_16B = 2,
NF_4H = 3,
NF_8H = 4,
NF_2S = 5,
NF_4S = 6,
NF_1D = 7,
NF_2D = 8,
NF_B = 9,
NF_H = 10,
NF_S = 11,
NF_D = 12
};
static const unsigned kNEONFormatMaxBits = 6;
struct NEONFormatMap {
// The bit positions in the instruction to consider.
uint8_t bits[kNEONFormatMaxBits];
// Mapping from concatenated bits to format.
NEONFormat map[1 << kNEONFormatMaxBits];
};
class NEONFormatDecoder {
public:
enum SubstitutionMode {
kPlaceholder,
kFormat
};
// Construct a format decoder with increasingly specific format maps for each
// subsitution. If no format map is specified, the default is the integer
// format map.
explicit NEONFormatDecoder(const Instruction* instr) {
instrbits_ = instr->InstructionBits();
SetFormatMaps(IntegerFormatMap());
}
NEONFormatDecoder(const Instruction* instr,
const NEONFormatMap* format) {
instrbits_ = instr->InstructionBits();
SetFormatMaps(format);
}
NEONFormatDecoder(const Instruction* instr,
const NEONFormatMap* format0,
const NEONFormatMap* format1) {
instrbits_ = instr->InstructionBits();
SetFormatMaps(format0, format1);
}
NEONFormatDecoder(const Instruction* instr,
const NEONFormatMap* format0,
const NEONFormatMap* format1,
const NEONFormatMap* format2) {
instrbits_ = instr->InstructionBits();
SetFormatMaps(format0, format1, format2);
}
// Set the format mapping for all or individual substitutions.
void SetFormatMaps(const NEONFormatMap* format0,
const NEONFormatMap* format1 = NULL,
const NEONFormatMap* format2 = NULL) {
VIXL_ASSERT(format0 != NULL);
formats_[0] = format0;
formats_[1] = (format1 == NULL) ? formats_[0] : format1;
formats_[2] = (format2 == NULL) ? formats_[1] : format2;
}
void SetFormatMap(unsigned index, const NEONFormatMap* format) {
VIXL_ASSERT(index <= (sizeof(formats_) / sizeof(formats_[0])));
VIXL_ASSERT(format != NULL);
formats_[index] = format;
}
// Substitute %s in the input string with the placeholder string for each
// register, ie. "'B", "'H", etc.
const char* SubstitutePlaceholders(const char* string) {
return Substitute(string, kPlaceholder, kPlaceholder, kPlaceholder);
}
// Substitute %s in the input string with a new string based on the
// substitution mode.
const char* Substitute(const char* string,
SubstitutionMode mode0 = kFormat,
SubstitutionMode mode1 = kFormat,
SubstitutionMode mode2 = kFormat) {
snprintf(form_buffer_, sizeof(form_buffer_), string,
GetSubstitute(0, mode0),
GetSubstitute(1, mode1),
GetSubstitute(2, mode2));
return form_buffer_;
}
// Append a "2" to a mnemonic string based of the state of the Q bit.
const char* Mnemonic(const char* mnemonic) {
if ((instrbits_ & NEON_Q) != 0) {
snprintf(mne_buffer_, sizeof(mne_buffer_), "%s2", mnemonic);
return mne_buffer_;
}
return mnemonic;
}
VectorFormat GetVectorFormat(int format_index = 0) {
return GetVectorFormat(formats_[format_index]);
}
VectorFormat GetVectorFormat(const NEONFormatMap* format_map) {
static const VectorFormat vform[] = {
kFormatUndefined,
kFormat8B, kFormat16B, kFormat4H, kFormat8H,
kFormat2S, kFormat4S, kFormat1D, kFormat2D,
kFormatB, kFormatH, kFormatS, kFormatD
};
VIXL_ASSERT(GetNEONFormat(format_map) < (sizeof(vform) / sizeof(vform[0])));
return vform[GetNEONFormat(format_map)];
}
// Built in mappings for common cases.
// The integer format map uses three bits (Q, size<1:0>) to encode the
// "standard" set of NEON integer vector formats.
static const NEONFormatMap* IntegerFormatMap() {
static const NEONFormatMap map = {
{23, 22, 30},
{NF_8B, NF_16B, NF_4H, NF_8H, NF_2S, NF_4S, NF_UNDEF, NF_2D}
};
return &map;
}
// The long integer format map uses two bits (size<1:0>) to encode the
// long set of NEON integer vector formats. These are used in narrow, wide
// and long operations.
static const NEONFormatMap* LongIntegerFormatMap() {
static const NEONFormatMap map = {
{23, 22}, {NF_8H, NF_4S, NF_2D}
};
return &map;
}
// The FP format map uses two bits (Q, size<0>) to encode the NEON FP vector
// formats: NF_2S, NF_4S, NF_2D.
static const NEONFormatMap* FPFormatMap() {
// The FP format map assumes two bits (Q, size<0>) are used to encode the
// NEON FP vector formats: NF_2S, NF_4S, NF_2D.
static const NEONFormatMap map = {
{22, 30}, {NF_2S, NF_4S, NF_UNDEF, NF_2D}
};
return &map;
}
// The load/store format map uses three bits (Q, 11, 10) to encode the
// set of NEON vector formats.
static const NEONFormatMap* LoadStoreFormatMap() {
static const NEONFormatMap map = {
{11, 10, 30},
{NF_8B, NF_16B, NF_4H, NF_8H, NF_2S, NF_4S, NF_1D, NF_2D}
};
return &map;
}
// The logical format map uses one bit (Q) to encode the NEON vector format:
// NF_8B, NF_16B.
static const NEONFormatMap* LogicalFormatMap() {
static const NEONFormatMap map = {
{30}, {NF_8B, NF_16B}
};
return &map;
}
// The triangular format map uses between two and five bits to encode the NEON
// vector format:
// xxx10->8B, xxx11->16B, xx100->4H, xx101->8H
// x1000->2S, x1001->4S, 10001->2D, all others undefined.
static const NEONFormatMap* TriangularFormatMap() {
static const NEONFormatMap map = {
{19, 18, 17, 16, 30},
{NF_UNDEF, NF_UNDEF, NF_8B, NF_16B, NF_4H, NF_8H, NF_8B, NF_16B, NF_2S,
NF_4S, NF_8B, NF_16B, NF_4H, NF_8H, NF_8B, NF_16B, NF_UNDEF, NF_2D,
NF_8B, NF_16B, NF_4H, NF_8H, NF_8B, NF_16B, NF_2S, NF_4S, NF_8B, NF_16B,
NF_4H, NF_8H, NF_8B, NF_16B}
};
return &map;
}
// The scalar format map uses two bits (size<1:0>) to encode the NEON scalar
// formats: NF_B, NF_H, NF_S, NF_D.
static const NEONFormatMap* ScalarFormatMap() {
static const NEONFormatMap map = {
{23, 22}, {NF_B, NF_H, NF_S, NF_D}
};
return &map;
}
// The long scalar format map uses two bits (size<1:0>) to encode the longer
// NEON scalar formats: NF_H, NF_S, NF_D.
static const NEONFormatMap* LongScalarFormatMap() {
static const NEONFormatMap map = {
{23, 22}, {NF_H, NF_S, NF_D}
};
return &map;
}
// The FP scalar format map assumes one bit (size<0>) is used to encode the
// NEON FP scalar formats: NF_S, NF_D.
static const NEONFormatMap* FPScalarFormatMap() {
static const NEONFormatMap map = {
{22}, {NF_S, NF_D}
};
return &map;
}
// The triangular scalar format map uses between one and four bits to encode
// the NEON FP scalar formats:
// xxx1->B, xx10->H, x100->S, 1000->D, all others undefined.
static const NEONFormatMap* TriangularScalarFormatMap() {
static const NEONFormatMap map = {
{19, 18, 17, 16},
{NF_UNDEF, NF_B, NF_H, NF_B, NF_S, NF_B, NF_H, NF_B,
NF_D, NF_B, NF_H, NF_B, NF_S, NF_B, NF_H, NF_B}
};
return &map;
}
private:
// Get a pointer to a string that represents the format or placeholder for
// the specified substitution index, based on the format map and instruction.
const char* GetSubstitute(int index, SubstitutionMode mode) {
if (mode == kFormat) {
return NEONFormatAsString(GetNEONFormat(formats_[index]));
}
VIXL_ASSERT(mode == kPlaceholder);
return NEONFormatAsPlaceholder(GetNEONFormat(formats_[index]));
}
// Get the NEONFormat enumerated value for bits obtained from the
// instruction based on the specified format mapping.
NEONFormat GetNEONFormat(const NEONFormatMap* format_map) {
return format_map->map[PickBits(format_map->bits)];
}
// Convert a NEONFormat into a string.
static const char* NEONFormatAsString(NEONFormat format) {
static const char* formats[] = {
"undefined",
"8b", "16b", "4h", "8h", "2s", "4s", "1d", "2d",
"b", "h", "s", "d"
};
VIXL_ASSERT(format < (sizeof(formats) / sizeof(formats[0])));
return formats[format];
}
// Convert a NEONFormat into a register placeholder string.
static const char* NEONFormatAsPlaceholder(NEONFormat format) {
VIXL_ASSERT((format == NF_B) || (format == NF_H) ||
(format == NF_S) || (format == NF_D) ||
(format == NF_UNDEF));
static const char* formats[] = {
"undefined",
"undefined", "undefined", "undefined", "undefined",
"undefined", "undefined", "undefined", "undefined",
"'B", "'H", "'S", "'D"
};
return formats[format];
}
// Select bits from instrbits_ defined by the bits array, concatenate them,
// and return the value.
uint8_t PickBits(const uint8_t bits[]) {
uint8_t result = 0;
for (unsigned b = 0; b < kNEONFormatMaxBits; b++) {
if (bits[b] == 0) break;
result <<= 1;
result |= ((instrbits_ & (1 << bits[b])) == 0) ? 0 : 1;
}
return result;
}
Instr instrbits_;
const NEONFormatMap* formats_[3];
char form_buffer_[64];
char mne_buffer_[16];
};
} // namespace vixl
#endif // VIXL_A64_INSTRUCTIONS_A64_H_

View File

@@ -28,7 +28,7 @@
#define VIXL_CODE_BUFFER_H
#include <string.h>
#include "globals.h"
#include "vixl/globals.h"
namespace vixl {

View File

@@ -1,4 +1,4 @@
// Copyright 2013, ARM Limited
// Copyright 2015, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
@@ -24,53 +24,13 @@
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include "utils.h"
#include <stdio.h>
#include "compiler-intrinsics.h"
namespace vixl {
uint32_t float_to_rawbits(float value) {
uint32_t bits = 0;
memcpy(&bits, &value, 4);
return bits;
}
uint64_t double_to_rawbits(double value) {
uint64_t bits = 0;
memcpy(&bits, &value, 8);
return bits;
}
float rawbits_to_float(uint32_t bits) {
float value = 0.0;
memcpy(&value, &bits, 4);
return value;
}
double rawbits_to_double(uint64_t bits) {
double value = 0.0;
memcpy(&value, &bits, 8);
return value;
}
int CountLeadingZeros(uint64_t value, int width) {
VIXL_ASSERT((width == 32) || (width == 64));
int count = 0;
uint64_t bit_test = UINT64_C(1) << (width - 1);
while ((count < width) && ((bit_test & value) == 0)) {
count++;
bit_test >>= 1;
}
return count;
}
int CountLeadingSignBits(int64_t value, int width) {
VIXL_ASSERT((width == 32) || (width == 64));
int CountLeadingSignBitsFallBack(int64_t value, int width) {
VIXL_ASSERT(IsPowerOf2(width) && (width <= 64));
if (value >= 0) {
return CountLeadingZeros(value, width) - 1;
} else {
@@ -79,23 +39,46 @@ int CountLeadingSignBits(int64_t value, int width) {
}
int CountTrailingZeros(uint64_t value, int width) {
VIXL_ASSERT((width == 32) || (width == 64));
int count = 0;
while ((count < width) && (((value >> count) & 1) == 0)) {
count++;
int CountLeadingZerosFallBack(uint64_t value, int width) {
VIXL_ASSERT(IsPowerOf2(width) && (width <= 64));
if (value == 0) {
return width;
}
int count = 0;
value = value << (64 - width);
if ((value & UINT64_C(0xffffffff00000000)) == 0) {
count += 32;
value = value << 32;
}
if ((value & UINT64_C(0xffff000000000000)) == 0) {
count += 16;
value = value << 16;
}
if ((value & UINT64_C(0xff00000000000000)) == 0) {
count += 8;
value = value << 8;
}
if ((value & UINT64_C(0xf000000000000000)) == 0) {
count += 4;
value = value << 4;
}
if ((value & UINT64_C(0xc000000000000000)) == 0) {
count += 2;
value = value << 2;
}
if ((value & UINT64_C(0x8000000000000000)) == 0) {
count += 1;
}
count += (value == 0);
return count;
}
int CountSetBits(uint64_t value, int width) {
// TODO: Other widths could be added here, as the implementation already
// supports them.
VIXL_ASSERT((width == 32) || (width == 64));
int CountSetBitsFallBack(uint64_t value, int width) {
VIXL_ASSERT(IsPowerOf2(width) && (width <= 64));
// Mask out unused bits to ensure that they are not counted.
value &= (UINT64_C(0xffffffffffffffff) >> (64-width));
value &= (UINT64_C(0xffffffffffffffff) >> (64 - width));
// Add up the set bits.
// The algorithm works by adding pairs of bit fields together iteratively,
@@ -122,30 +105,40 @@ int CountSetBits(uint64_t value, int width) {
value = ((value >> shift) & kMasks[i]) + (value & kMasks[i]);
}
return value;
return static_cast<int>(value);
}
uint64_t LowestSetBit(uint64_t value) {
return value & -value;
}
bool IsPowerOf2(int64_t value) {
return (value != 0) && ((value & (value - 1)) == 0);
}
unsigned CountClearHalfWords(uint64_t imm, unsigned reg_size) {
VIXL_ASSERT((reg_size % 8) == 0);
int CountTrailingZerosFallBack(uint64_t value, int width) {
VIXL_ASSERT(IsPowerOf2(width) && (width <= 64));
int count = 0;
for (unsigned i = 0; i < (reg_size / 16); i++) {
if ((imm & 0xffff) == 0) {
count++;
}
imm >>= 16;
value = value << (64 - width);
if ((value & UINT64_C(0xffffffff)) == 0) {
count += 32;
value = value >> 32;
}
return count;
if ((value & 0xffff) == 0) {
count += 16;
value = value >> 16;
}
if ((value & 0xff) == 0) {
count += 8;
value = value >> 8;
}
if ((value & 0xf) == 0) {
count += 4;
value = value >> 4;
}
if ((value & 0x3) == 0) {
count += 2;
value = value >> 2;
}
if ((value & 0x1) == 0) {
count += 1;
}
count += (value == 0);
return count - (64 - width);
}
} // namespace vixl

View File

@@ -0,0 +1,155 @@
// Copyright 2015, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of ARM Limited nor the names of its contributors may be
// used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#ifndef VIXL_COMPILER_INTRINSICS_H
#define VIXL_COMPILER_INTRINSICS_H
#include "globals.h"
namespace vixl {
// Helper to check whether the version of GCC used is greater than the specified
// requirement.
#define MAJOR 1000000
#define MINOR 1000
#if defined(__GNUC__) && defined(__GNUC_MINOR__) && defined(__GNUC_PATCHLEVEL__)
#define GCC_VERSION_OR_NEWER(major, minor, patchlevel) \
((__GNUC__ * MAJOR + __GNUC_MINOR__ * MINOR + __GNUC_PATCHLEVEL__) >= \
((major) * MAJOR + (minor) * MINOR + (patchlevel)))
#elif defined(__GNUC__) && defined(__GNUC_MINOR__)
#define GCC_VERSION_OR_NEWER(major, minor, patchlevel) \
((__GNUC__ * MAJOR + __GNUC_MINOR__ * MINOR) >= \
((major) * MAJOR + (minor) * MINOR + (patchlevel)))
#else
#define GCC_VERSION_OR_NEWER(major, minor, patchlevel) 0
#endif
#if defined(__clang__) && !defined(VIXL_NO_COMPILER_BUILTINS)
#define COMPILER_HAS_BUILTIN_CLRSB (__has_builtin(__builtin_clrsb))
#define COMPILER_HAS_BUILTIN_CLZ (__has_builtin(__builtin_clz))
#define COMPILER_HAS_BUILTIN_CTZ (__has_builtin(__builtin_ctz))
#define COMPILER_HAS_BUILTIN_FFS (__has_builtin(__builtin_ffs))
#define COMPILER_HAS_BUILTIN_POPCOUNT (__has_builtin(__builtin_popcount))
#elif defined(__GNUC__) && !defined(VIXL_NO_COMPILER_BUILTINS)
// The documentation for these builtins is available at:
// https://gcc.gnu.org/onlinedocs/gcc-$MAJOR.$MINOR.$PATCHLEVEL/gcc//Other-Builtins.html
# define COMPILER_HAS_BUILTIN_CLRSB (GCC_VERSION_OR_NEWER(4, 7, 0))
# define COMPILER_HAS_BUILTIN_CLZ (GCC_VERSION_OR_NEWER(3, 4, 0))
# define COMPILER_HAS_BUILTIN_CTZ (GCC_VERSION_OR_NEWER(3, 4, 0))
# define COMPILER_HAS_BUILTIN_FFS (GCC_VERSION_OR_NEWER(3, 4, 0))
# define COMPILER_HAS_BUILTIN_POPCOUNT (GCC_VERSION_OR_NEWER(3, 4, 0))
#else
// One can define VIXL_NO_COMPILER_BUILTINS to force using the manually
// implemented C++ methods.
#define COMPILER_HAS_BUILTIN_BSWAP false
#define COMPILER_HAS_BUILTIN_CLRSB false
#define COMPILER_HAS_BUILTIN_CLZ false
#define COMPILER_HAS_BUILTIN_CTZ false
#define COMPILER_HAS_BUILTIN_FFS false
#define COMPILER_HAS_BUILTIN_POPCOUNT false
#endif
template<typename V>
inline bool IsPowerOf2(V value) {
return (value != 0) && ((value & (value - 1)) == 0);
}
// Declaration of fallback functions.
int CountLeadingSignBitsFallBack(int64_t value, int width);
int CountLeadingZerosFallBack(uint64_t value, int width);
int CountSetBitsFallBack(uint64_t value, int width);
int CountTrailingZerosFallBack(uint64_t value, int width);
// Implementation of intrinsics functions.
// TODO: The implementations could be improved for sizes different from 32bit
// and 64bit: we could mask the values and call the appropriate builtin.
template<typename V>
inline int CountLeadingSignBits(V value, int width = (sizeof(V) * 8)) {
#if COMPILER_HAS_BUILTIN_CLRSB
if (width == 32) {
return __builtin_clrsb(value);
} else if (width == 64) {
return __builtin_clrsbll(value);
}
#endif
return CountLeadingSignBitsFallBack(value, width);
}
template<typename V>
inline int CountLeadingZeros(V value, int width = (sizeof(V) * 8)) {
#if COMPILER_HAS_BUILTIN_CLZ
if (width == 32) {
return (value == 0) ? 32 : __builtin_clz(static_cast<unsigned>(value));
} else if (width == 64) {
return (value == 0) ? 64 : __builtin_clzll(value);
}
#endif
return CountLeadingZerosFallBack(value, width);
}
template<typename V>
inline int CountSetBits(V value, int width = (sizeof(V) * 8)) {
#if COMPILER_HAS_BUILTIN_POPCOUNT
if (width == 32) {
return __builtin_popcount(static_cast<unsigned>(value));
} else if (width == 64) {
return __builtin_popcountll(value);
}
#endif
return CountSetBitsFallBack(value, width);
}
template<typename V>
inline int CountTrailingZeros(V value, int width = (sizeof(V) * 8)) {
#if COMPILER_HAS_BUILTIN_CTZ
if (width == 32) {
return (value == 0) ? 32 : __builtin_ctz(static_cast<unsigned>(value));
} else if (width == 64) {
return (value == 0) ? 64 : __builtin_ctzll(value);
}
#endif
return CountTrailingZerosFallBack(value, width);
}
} // namespace vixl
#endif // VIXL_COMPILER_INTRINSICS_H

View File

@@ -1,4 +1,4 @@
// Copyright 2013, ARM Limited
// Copyright 2015, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
@@ -49,20 +49,26 @@
#include <stdint.h>
#include <stdlib.h>
#include <stddef.h>
#include "platform.h"
#include "vixl/platform.h"
typedef uint8_t byte;
// Type for half-precision (16 bit) floating point numbers.
typedef uint16_t float16;
const int KBytes = 1024;
const int MBytes = 1024 * KBytes;
#define VIXL_ABORT() printf("in %s, line %i", __FILE__, __LINE__); abort()
#define VIXL_ABORT() \
do { printf("in %s, line %i", __FILE__, __LINE__); abort(); } while (false)
#ifdef VIXL_DEBUG
#define VIXL_ASSERT(condition) assert(condition)
#define VIXL_CHECK(condition) VIXL_ASSERT(condition)
#define VIXL_UNIMPLEMENTED() printf("UNIMPLEMENTED\t"); VIXL_ABORT()
#define VIXL_UNREACHABLE() printf("UNREACHABLE\t"); VIXL_ABORT()
#define VIXL_UNIMPLEMENTED() \
do { fprintf(stderr, "UNIMPLEMENTED\t"); VIXL_ABORT(); } while (false)
#define VIXL_UNREACHABLE() \
do { fprintf(stderr, "UNREACHABLE\t"); VIXL_ABORT(); } while (false)
#else
#define VIXL_ASSERT(condition) ((void) 0)
#define VIXL_CHECK(condition) assert(condition)
@@ -76,10 +82,70 @@ const int MBytes = 1024 * KBytes;
#define VIXL_STATIC_ASSERT_LINE(line, condition) \
typedef char VIXL_CONCAT(STATIC_ASSERT_LINE_, line)[(condition) ? 1 : -1] \
__attribute__((unused))
#define VIXL_STATIC_ASSERT(condition) VIXL_STATIC_ASSERT_LINE(__LINE__, condition) //NOLINT
#define VIXL_STATIC_ASSERT(condition) \
VIXL_STATIC_ASSERT_LINE(__LINE__, condition)
template <typename T> inline void USE(T) {}
template <typename T1>
inline void USE(T1) {}
#define VIXL_ALIGNMENT_EXCEPTION() printf("ALIGNMENT EXCEPTION\t"); VIXL_ABORT()
template <typename T1, typename T2>
inline void USE(T1, T2) {}
template <typename T1, typename T2, typename T3>
inline void USE(T1, T2, T3) {}
template <typename T1, typename T2, typename T3, typename T4>
inline void USE(T1, T2, T3, T4) {}
#define VIXL_ALIGNMENT_EXCEPTION() \
do { fprintf(stderr, "ALIGNMENT EXCEPTION\t"); VIXL_ABORT(); } while (0)
// The clang::fallthrough attribute is used along with the Wimplicit-fallthrough
// argument to annotate intentional fall-through between switch labels.
// For more information please refer to:
// http://clang.llvm.org/docs/AttributeReference.html#fallthrough-clang-fallthrough
#ifndef __has_warning
#define __has_warning(x) 0
#endif
// Note: This option is only available for Clang. And will only be enabled for
// C++11(201103L).
#if __has_warning("-Wimplicit-fallthrough") && __cplusplus >= 201103L
#define VIXL_FALLTHROUGH() [[clang::fallthrough]] //NOLINT
#else
#define VIXL_FALLTHROUGH() do {} while (0)
#endif
#if __cplusplus >= 201103L
#define VIXL_NO_RETURN [[noreturn]] //NOLINT
#else
#define VIXL_NO_RETURN __attribute__((noreturn))
#endif
// Some functions might only be marked as "noreturn" for the DEBUG build. This
// macro should be used for such cases (for more details see what
// VIXL_UNREACHABLE expands to).
#ifdef VIXL_DEBUG
#define VIXL_DEBUG_NO_RETURN VIXL_NO_RETURN
#else
#define VIXL_DEBUG_NO_RETURN
#endif
#ifdef VIXL_INCLUDE_SIMULATOR
#ifndef VIXL_GENERATE_SIMULATOR_INSTRUCTIONS_VALUE
#define VIXL_GENERATE_SIMULATOR_INSTRUCTIONS_VALUE 1
#endif
#else
#ifndef VIXL_GENERATE_SIMULATOR_INSTRUCTIONS_VALUE
#define VIXL_GENERATE_SIMULATOR_INSTRUCTIONS_VALUE 0
#endif
#if VIXL_GENERATE_SIMULATOR_INSTRUCTIONS_VALUE
#warning "Generating Simulator instructions without Simulator support."
#endif
#endif
#ifdef USE_SIMULATOR
#error "Please see the release notes for USE_SIMULATOR."
#endif
#endif // VIXL_GLOBALS_H

View File

@@ -0,0 +1,775 @@
// Copyright 2015, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of ARM Limited nor the names of its contributors may be
// used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#ifndef VIXL_INVALSET_H_
#define VIXL_INVALSET_H_
#include <string.h>
#include <algorithm>
#include <vector>
#include "vixl/globals.h"
namespace vixl {
// We define a custom data structure template and its iterator as `std`
// containers do not fit the performance requirements for some of our use cases.
//
// The structure behaves like an iterable unordered set with special properties
// and restrictions. "InvalSet" stands for "Invalidatable Set".
//
// Restrictions and requirements:
// - Adding an element already present in the set is illegal. In debug mode,
// this is checked at insertion time.
// - The templated class `ElementType` must provide comparison operators so that
// `std::sort()` can be used.
// - A key must be available to represent invalid elements.
// - Elements with an invalid key must compare higher or equal to any other
// element.
//
// Use cases and performance considerations:
// Our use cases present two specificities that allow us to design this
// structure to provide fast insertion *and* fast search and deletion
// operations:
// - Elements are (generally) inserted in order (sorted according to their key).
// - A key is available to mark elements as invalid (deleted).
// The backing `std::vector` allows for fast insertions. When
// searching for an element we ensure the elements are sorted (this is generally
// the case) and perform a binary search. When deleting an element we do not
// free the associated memory immediately. Instead, an element to be deleted is
// marked with the 'invalid' key. Other methods of the container take care of
// ignoring entries marked as invalid.
// To avoid the overhead of the `std::vector` container when only few entries
// are used, a number of elements are preallocated.
// 'ElementType' and 'KeyType' are respectively the types of the elements and
// their key. The structure only reclaims memory when safe to do so, if the
// number of elements that can be reclaimed is greater than `RECLAIM_FROM` and
// greater than `<total number of elements> / RECLAIM_FACTOR.
#define TEMPLATE_INVALSET_P_DECL \
class ElementType, \
unsigned N_PREALLOCATED_ELEMENTS, \
class KeyType, \
KeyType INVALID_KEY, \
size_t RECLAIM_FROM, \
unsigned RECLAIM_FACTOR
#define TEMPLATE_INVALSET_P_DEF \
ElementType, N_PREALLOCATED_ELEMENTS, \
KeyType, INVALID_KEY, RECLAIM_FROM, RECLAIM_FACTOR
template<class S> class InvalSetIterator; // Forward declaration.
template<TEMPLATE_INVALSET_P_DECL> class InvalSet {
public:
InvalSet();
~InvalSet();
static const size_t kNPreallocatedElements = N_PREALLOCATED_ELEMENTS;
static const KeyType kInvalidKey = INVALID_KEY;
// It is illegal to insert an element already present in the set.
void insert(const ElementType& element);
// Looks for the specified element in the set and - if found - deletes it.
void erase(const ElementType& element);
// This indicates the number of (valid) elements stored in this set.
size_t size() const;
// Returns true if no elements are stored in the set.
// Note that this does not mean the the backing storage is empty: it can still
// contain invalid elements.
bool empty() const;
void clear();
const ElementType min_element();
// This returns the key of the minimum element in the set.
KeyType min_element_key();
static bool IsValid(const ElementType& element);
static KeyType Key(const ElementType& element);
static void SetKey(ElementType* element, KeyType key);
protected:
// Returns a pointer to the element in vector_ if it was found, or NULL
// otherwise.
ElementType* Search(const ElementType& element);
// The argument *must* point to an element stored in *this* set.
// This function is not allowed to move elements in the backing vector
// storage.
void EraseInternal(ElementType* element);
// The elements in the range searched must be sorted.
ElementType* BinarySearch(const ElementType& element,
ElementType* start,
ElementType* end) const;
// Sort the elements.
enum SortType {
// The 'hard' version guarantees that invalid elements are moved to the end
// of the container.
kHardSort,
// The 'soft' version only guarantees that the elements will be sorted.
// Invalid elements may still be present anywhere in the set.
kSoftSort
};
void Sort(SortType sort_type);
// Delete the elements that have an invalid key. The complexity is linear
// with the size of the vector.
void Clean();
const ElementType Front() const;
const ElementType Back() const;
// Delete invalid trailing elements and return the last valid element in the
// set.
const ElementType CleanBack();
// Returns a pointer to the start or end of the backing storage.
const ElementType* StorageBegin() const;
const ElementType* StorageEnd() const;
ElementType* StorageBegin();
ElementType* StorageEnd();
// Returns the index of the element within the backing storage. The element
// must belong to the backing storage.
size_t ElementIndex(const ElementType* element) const;
// Returns the element at the specified index in the backing storage.
const ElementType* ElementAt(size_t index) const;
ElementType* ElementAt(size_t index);
static const ElementType* FirstValidElement(const ElementType* from,
const ElementType* end);
void CacheMinElement();
const ElementType CachedMinElement() const;
bool ShouldReclaimMemory() const;
void ReclaimMemory();
bool IsUsingVector() const { return vector_ != NULL; }
void set_sorted(bool sorted) { sorted_ = sorted; }
// We cache some data commonly required by users to improve performance.
// We cannot cache pointers to elements as we do not control the backing
// storage.
bool valid_cached_min_;
size_t cached_min_index_; // Valid iff `valid_cached_min_` is true.
KeyType cached_min_key_; // Valid iff `valid_cached_min_` is true.
// Indicates whether the elements are sorted.
bool sorted_;
// This represents the number of (valid) elements in this set.
size_t size_;
// The backing storage is either the array of preallocated elements or the
// vector. The structure starts by using the preallocated elements, and
// transitions (permanently) to using the vector once more than
// kNPreallocatedElements are used.
// Elements are only invalidated when using the vector. The preallocated
// storage always only contains valid elements.
ElementType preallocated_[kNPreallocatedElements];
std::vector<ElementType>* vector_;
#ifdef VIXL_DEBUG
// Iterators acquire and release this monitor. While a set is acquired,
// certain operations are illegal to ensure that the iterator will
// correctly iterate over the elements in the set.
int monitor_;
int monitor() const { return monitor_; }
void Acquire() { monitor_++; }
void Release() {
monitor_--;
VIXL_ASSERT(monitor_ >= 0);
}
#endif
friend class InvalSetIterator<InvalSet<TEMPLATE_INVALSET_P_DEF> >;
typedef ElementType _ElementType;
typedef KeyType _KeyType;
};
template<class S> class InvalSetIterator {
private:
// Redefine types to mirror the associated set types.
typedef typename S::_ElementType ElementType;
typedef typename S::_KeyType KeyType;
public:
explicit InvalSetIterator(S* inval_set);
~InvalSetIterator();
ElementType* Current() const;
void Advance();
bool Done() const;
// Mark this iterator as 'done'.
void Finish();
// Delete the current element and advance the iterator to point to the next
// element.
void DeleteCurrentAndAdvance();
static bool IsValid(const ElementType& element);
static KeyType Key(const ElementType& element);
protected:
void MoveToValidElement();
// Indicates if the iterator is looking at the vector or at the preallocated
// elements.
const bool using_vector_;
// Used when looking at the preallocated elements, or in debug mode when using
// the vector to track how many times the iterator has advanced.
size_t index_;
typename std::vector<ElementType>::iterator iterator_;
S* inval_set_;
};
template<TEMPLATE_INVALSET_P_DECL>
InvalSet<TEMPLATE_INVALSET_P_DEF>::InvalSet()
: valid_cached_min_(false),
sorted_(true), size_(0), vector_(NULL) {
#ifdef VIXL_DEBUG
monitor_ = 0;
#endif
}
template<TEMPLATE_INVALSET_P_DECL>
InvalSet<TEMPLATE_INVALSET_P_DEF>::~InvalSet() {
VIXL_ASSERT(monitor_ == 0);
delete vector_;
}
template<TEMPLATE_INVALSET_P_DECL>
void InvalSet<TEMPLATE_INVALSET_P_DEF>::insert(const ElementType& element) {
VIXL_ASSERT(monitor() == 0);
VIXL_ASSERT(IsValid(element));
VIXL_ASSERT(Search(element) == NULL);
set_sorted(empty() || (sorted_ && (element > CleanBack())));
if (IsUsingVector()) {
vector_->push_back(element);
} else {
if (size_ < kNPreallocatedElements) {
preallocated_[size_] = element;
} else {
// Transition to using the vector.
vector_ = new std::vector<ElementType>(preallocated_,
preallocated_ + size_);
vector_->push_back(element);
}
}
size_++;
if (valid_cached_min_ && (element < min_element())) {
cached_min_index_ = IsUsingVector() ? vector_->size() - 1 : size_ - 1;
cached_min_key_ = Key(element);
valid_cached_min_ = true;
}
if (ShouldReclaimMemory()) {
ReclaimMemory();
}
}
template<TEMPLATE_INVALSET_P_DECL>
void InvalSet<TEMPLATE_INVALSET_P_DEF>::erase(const ElementType& element) {
VIXL_ASSERT(monitor() == 0);
VIXL_ASSERT(IsValid(element));
ElementType* local_element = Search(element);
if (local_element != NULL) {
EraseInternal(local_element);
}
}
template<TEMPLATE_INVALSET_P_DECL>
ElementType* InvalSet<TEMPLATE_INVALSET_P_DEF>::Search(
const ElementType& element) {
VIXL_ASSERT(monitor() == 0);
if (empty()) {
return NULL;
}
if (ShouldReclaimMemory()) {
ReclaimMemory();
}
if (!sorted_) {
Sort(kHardSort);
}
if (!valid_cached_min_) {
CacheMinElement();
}
return BinarySearch(element, ElementAt(cached_min_index_), StorageEnd());
}
template<TEMPLATE_INVALSET_P_DECL>
size_t InvalSet<TEMPLATE_INVALSET_P_DEF>::size() const {
return size_;
}
template<TEMPLATE_INVALSET_P_DECL>
bool InvalSet<TEMPLATE_INVALSET_P_DEF>::empty() const {
return size_ == 0;
}
template<TEMPLATE_INVALSET_P_DECL>
void InvalSet<TEMPLATE_INVALSET_P_DEF>::clear() {
VIXL_ASSERT(monitor() == 0);
size_ = 0;
if (IsUsingVector()) {
vector_->clear();
}
set_sorted(true);
valid_cached_min_ = false;
}
template<TEMPLATE_INVALSET_P_DECL>
const ElementType InvalSet<TEMPLATE_INVALSET_P_DEF>::min_element() {
VIXL_ASSERT(monitor() == 0);
VIXL_ASSERT(!empty());
CacheMinElement();
return *ElementAt(cached_min_index_);
}
template<TEMPLATE_INVALSET_P_DECL>
KeyType InvalSet<TEMPLATE_INVALSET_P_DEF>::min_element_key() {
VIXL_ASSERT(monitor() == 0);
if (valid_cached_min_) {
return cached_min_key_;
} else {
return Key(min_element());
}
}
template<TEMPLATE_INVALSET_P_DECL>
bool InvalSet<TEMPLATE_INVALSET_P_DEF>::IsValid(const ElementType& element) {
return Key(element) != kInvalidKey;
}
template<TEMPLATE_INVALSET_P_DECL>
void InvalSet<TEMPLATE_INVALSET_P_DEF>::EraseInternal(ElementType* element) {
// Note that this function must be safe even while an iterator has acquired
// this set.
VIXL_ASSERT(element != NULL);
size_t deleted_index = ElementIndex(element);
if (IsUsingVector()) {
VIXL_ASSERT((&(vector_->front()) <= element) &&
(element <= &(vector_->back())));
SetKey(element, kInvalidKey);
} else {
VIXL_ASSERT((preallocated_ <= element) &&
(element < (preallocated_ + kNPreallocatedElements)));
ElementType* end = preallocated_ + kNPreallocatedElements;
size_t copy_size = sizeof(*element) * (end - element - 1);
memmove(element, element + 1, copy_size);
}
size_--;
if (valid_cached_min_ &&
(deleted_index == cached_min_index_)) {
if (sorted_ && !empty()) {
const ElementType* min = FirstValidElement(element, StorageEnd());
cached_min_index_ = ElementIndex(min);
cached_min_key_ = Key(*min);
valid_cached_min_ = true;
} else {
valid_cached_min_ = false;
}
}
}
template<TEMPLATE_INVALSET_P_DECL>
ElementType* InvalSet<TEMPLATE_INVALSET_P_DEF>::BinarySearch(
const ElementType& element, ElementType* start, ElementType* end) const {
if (start == end) {
return NULL;
}
VIXL_ASSERT(sorted_);
VIXL_ASSERT(start < end);
VIXL_ASSERT(!empty());
// Perform a binary search through the elements while ignoring invalid
// elements.
ElementType* elements = start;
size_t low = 0;
size_t high = (end - start) - 1;
while (low < high) {
// Find valid bounds.
while (!IsValid(elements[low]) && (low < high)) ++low;
while (!IsValid(elements[high]) && (low < high)) --high;
VIXL_ASSERT(low <= high);
// Avoid overflow when computing the middle index.
size_t middle = low / 2 + high / 2 + (low & high & 1);
if ((middle == low) || (middle == high)) {
break;
}
while (!IsValid(elements[middle]) && (middle < high - 1)) ++middle;
while (!IsValid(elements[middle]) && (low + 1 < middle)) --middle;
if (!IsValid(elements[middle])) {
break;
}
if (elements[middle] < element) {
low = middle;
} else {
high = middle;
}
}
if (elements[low] == element) return &elements[low];
if (elements[high] == element) return &elements[high];
return NULL;
}
template<TEMPLATE_INVALSET_P_DECL>
void InvalSet<TEMPLATE_INVALSET_P_DEF>::Sort(SortType sort_type) {
VIXL_ASSERT(monitor() == 0);
if (sort_type == kSoftSort) {
if (sorted_) {
return;
}
}
if (empty()) {
return;
}
Clean();
std::sort(StorageBegin(), StorageEnd());
set_sorted(true);
cached_min_index_ = 0;
cached_min_key_ = Key(Front());
valid_cached_min_ = true;
}
template<TEMPLATE_INVALSET_P_DECL>
void InvalSet<TEMPLATE_INVALSET_P_DEF>::Clean() {
VIXL_ASSERT(monitor() == 0);
if (empty() || !IsUsingVector()) {
return;
}
// Manually iterate through the vector storage to discard invalid elements.
ElementType* start = &(vector_->front());
ElementType* end = start + vector_->size();
ElementType* c = start;
ElementType* first_invalid;
ElementType* first_valid;
ElementType* next_invalid;
while (c < end && IsValid(*c)) { c++; }
first_invalid = c;
while (c < end) {
while (c < end && !IsValid(*c)) { c++; }
first_valid = c;
while (c < end && IsValid(*c)) { c++; }
next_invalid = c;
ptrdiff_t n_moved_elements = (next_invalid - first_valid);
memmove(first_invalid, first_valid, n_moved_elements * sizeof(*c));
first_invalid = first_invalid + n_moved_elements;
c = next_invalid;
}
// Delete the trailing invalid elements.
vector_->erase(vector_->begin() + (first_invalid - start), vector_->end());
VIXL_ASSERT(vector_->size() == size_);
if (sorted_) {
valid_cached_min_ = true;
cached_min_index_ = 0;
cached_min_key_ = Key(*ElementAt(0));
} else {
valid_cached_min_ = false;
}
}
template<TEMPLATE_INVALSET_P_DECL>
const ElementType InvalSet<TEMPLATE_INVALSET_P_DEF>::Front() const {
VIXL_ASSERT(!empty());
return IsUsingVector() ? vector_->front() : preallocated_[0];
}
template<TEMPLATE_INVALSET_P_DECL>
const ElementType InvalSet<TEMPLATE_INVALSET_P_DEF>::Back() const {
VIXL_ASSERT(!empty());
return IsUsingVector() ? vector_->back() : preallocated_[size_ - 1];
}
template<TEMPLATE_INVALSET_P_DECL>
const ElementType InvalSet<TEMPLATE_INVALSET_P_DEF>::CleanBack() {
VIXL_ASSERT(monitor() == 0);
if (IsUsingVector()) {
// Delete the invalid trailing elements.
typename std::vector<ElementType>::reverse_iterator it = vector_->rbegin();
while (!IsValid(*it)) {
it++;
}
vector_->erase(it.base(), vector_->end());
}
return Back();
}
template<TEMPLATE_INVALSET_P_DECL>
const ElementType* InvalSet<TEMPLATE_INVALSET_P_DEF>::StorageBegin() const {
return IsUsingVector() ? &(vector_->front()) : preallocated_;
}
template<TEMPLATE_INVALSET_P_DECL>
const ElementType* InvalSet<TEMPLATE_INVALSET_P_DEF>::StorageEnd() const {
return IsUsingVector() ? &(vector_->back()) + 1 : preallocated_ + size_;
}
template<TEMPLATE_INVALSET_P_DECL>
ElementType* InvalSet<TEMPLATE_INVALSET_P_DEF>::StorageBegin() {
return IsUsingVector() ? &(vector_->front()) : preallocated_;
}
template<TEMPLATE_INVALSET_P_DECL>
ElementType* InvalSet<TEMPLATE_INVALSET_P_DEF>::StorageEnd() {
return IsUsingVector() ? &(vector_->back()) + 1 : preallocated_ + size_;
}
template<TEMPLATE_INVALSET_P_DECL>
size_t InvalSet<TEMPLATE_INVALSET_P_DEF>::ElementIndex(
const ElementType* element) const {
VIXL_ASSERT((StorageBegin() <= element) && (element < StorageEnd()));
return element - StorageBegin();
}
template<TEMPLATE_INVALSET_P_DECL>
const ElementType* InvalSet<TEMPLATE_INVALSET_P_DEF>::ElementAt(
size_t index) const {
VIXL_ASSERT(
(IsUsingVector() && (index < vector_->size())) || (index < size_));
return StorageBegin() + index;
}
template<TEMPLATE_INVALSET_P_DECL>
ElementType* InvalSet<TEMPLATE_INVALSET_P_DEF>::ElementAt(size_t index) {
VIXL_ASSERT(
(IsUsingVector() && (index < vector_->size())) || (index < size_));
return StorageBegin() + index;
}
template<TEMPLATE_INVALSET_P_DECL>
const ElementType* InvalSet<TEMPLATE_INVALSET_P_DEF>::FirstValidElement(
const ElementType* from, const ElementType* end) {
while ((from < end) && !IsValid(*from)) {
from++;
}
return from;
}
template<TEMPLATE_INVALSET_P_DECL>
void InvalSet<TEMPLATE_INVALSET_P_DEF>::CacheMinElement() {
VIXL_ASSERT(monitor() == 0);
VIXL_ASSERT(!empty());
if (valid_cached_min_) {
return;
}
if (sorted_) {
const ElementType* min = FirstValidElement(StorageBegin(), StorageEnd());
cached_min_index_ = ElementIndex(min);
cached_min_key_ = Key(*min);
valid_cached_min_ = true;
} else {
Sort(kHardSort);
}
VIXL_ASSERT(valid_cached_min_);
}
template<TEMPLATE_INVALSET_P_DECL>
bool InvalSet<TEMPLATE_INVALSET_P_DEF>::ShouldReclaimMemory() const {
if (!IsUsingVector()) {
return false;
}
size_t n_invalid_elements = vector_->size() - size_;
return (n_invalid_elements > RECLAIM_FROM) &&
(n_invalid_elements > vector_->size() / RECLAIM_FACTOR);
}
template<TEMPLATE_INVALSET_P_DECL>
void InvalSet<TEMPLATE_INVALSET_P_DEF>::ReclaimMemory() {
VIXL_ASSERT(monitor() == 0);
Clean();
}
template<class S>
InvalSetIterator<S>::InvalSetIterator(S* inval_set)
: using_vector_((inval_set != NULL) && inval_set->IsUsingVector()),
index_(0),
inval_set_(inval_set) {
if (inval_set != NULL) {
inval_set->Sort(S::kSoftSort);
#ifdef VIXL_DEBUG
inval_set->Acquire();
#endif
if (using_vector_) {
iterator_ = typename std::vector<ElementType>::iterator(
inval_set_->vector_->begin());
}
MoveToValidElement();
}
}
template<class S>
InvalSetIterator<S>::~InvalSetIterator() {
#ifdef VIXL_DEBUG
if (inval_set_ != NULL) {
inval_set_->Release();
}
#endif
}
template<class S>
typename S::_ElementType* InvalSetIterator<S>::Current() const {
VIXL_ASSERT(!Done());
if (using_vector_) {
return &(*iterator_);
} else {
return &(inval_set_->preallocated_[index_]);
}
}
template<class S>
void InvalSetIterator<S>::Advance() {
VIXL_ASSERT(!Done());
if (using_vector_) {
iterator_++;
#ifdef VIXL_DEBUG
index_++;
#endif
MoveToValidElement();
} else {
index_++;
}
}
template<class S>
bool InvalSetIterator<S>::Done() const {
if (using_vector_) {
bool done = (iterator_ == inval_set_->vector_->end());
VIXL_ASSERT(done == (index_ == inval_set_->size()));
return done;
} else {
return index_ == inval_set_->size();
}
}
template<class S>
void InvalSetIterator<S>::Finish() {
VIXL_ASSERT(inval_set_->sorted_);
if (using_vector_) {
iterator_ = inval_set_->vector_->end();
}
index_ = inval_set_->size();
}
template<class S>
void InvalSetIterator<S>::DeleteCurrentAndAdvance() {
if (using_vector_) {
inval_set_->EraseInternal(&(*iterator_));
MoveToValidElement();
} else {
inval_set_->EraseInternal(inval_set_->preallocated_ + index_);
}
}
template<class S>
bool InvalSetIterator<S>::IsValid(const ElementType& element) {
return S::IsValid(element);
}
template<class S>
typename S::_KeyType InvalSetIterator<S>::Key(const ElementType& element) {
return S::Key(element);
}
template<class S>
void InvalSetIterator<S>::MoveToValidElement() {
if (using_vector_) {
while ((iterator_ != inval_set_->vector_->end()) && !IsValid(*iterator_)) {
iterator_++;
}
} else {
VIXL_ASSERT(inval_set_->empty() || IsValid(inval_set_->preallocated_[0]));
// Nothing to do.
}
}
#undef TEMPLATE_INVALSET_P_DECL
#undef TEMPLATE_INVALSET_P_DEF
} // namespace vixl
#endif // VIXL_INVALSET_H_

View File

@@ -1,4 +1,4 @@
// Copyright 2013, ARM Limited
// Copyright 2014, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without

142
disas/libvixl/vixl/utils.cc Normal file
View File

@@ -0,0 +1,142 @@
// Copyright 2015, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of ARM Limited nor the names of its contributors may be
// used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include "vixl/utils.h"
#include <stdio.h>
namespace vixl {
uint32_t float_to_rawbits(float value) {
uint32_t bits = 0;
memcpy(&bits, &value, 4);
return bits;
}
uint64_t double_to_rawbits(double value) {
uint64_t bits = 0;
memcpy(&bits, &value, 8);
return bits;
}
float rawbits_to_float(uint32_t bits) {
float value = 0.0;
memcpy(&value, &bits, 4);
return value;
}
double rawbits_to_double(uint64_t bits) {
double value = 0.0;
memcpy(&value, &bits, 8);
return value;
}
uint32_t float_sign(float val) {
uint32_t rawbits = float_to_rawbits(val);
return unsigned_bitextract_32(31, 31, rawbits);
}
uint32_t float_exp(float val) {
uint32_t rawbits = float_to_rawbits(val);
return unsigned_bitextract_32(30, 23, rawbits);
}
uint32_t float_mantissa(float val) {
uint32_t rawbits = float_to_rawbits(val);
return unsigned_bitextract_32(22, 0, rawbits);
}
uint32_t double_sign(double val) {
uint64_t rawbits = double_to_rawbits(val);
return static_cast<uint32_t>(unsigned_bitextract_64(63, 63, rawbits));
}
uint32_t double_exp(double val) {
uint64_t rawbits = double_to_rawbits(val);
return static_cast<uint32_t>(unsigned_bitextract_64(62, 52, rawbits));
}
uint64_t double_mantissa(double val) {
uint64_t rawbits = double_to_rawbits(val);
return unsigned_bitextract_64(51, 0, rawbits);
}
float float_pack(uint32_t sign, uint32_t exp, uint32_t mantissa) {
uint32_t bits = (sign << 31) | (exp << 23) | mantissa;
return rawbits_to_float(bits);
}
double double_pack(uint64_t sign, uint64_t exp, uint64_t mantissa) {
uint64_t bits = (sign << 63) | (exp << 52) | mantissa;
return rawbits_to_double(bits);
}
int float16classify(float16 value) {
uint16_t exponent_max = (1 << 5) - 1;
uint16_t exponent_mask = exponent_max << 10;
uint16_t mantissa_mask = (1 << 10) - 1;
uint16_t exponent = (value & exponent_mask) >> 10;
uint16_t mantissa = value & mantissa_mask;
if (exponent == 0) {
if (mantissa == 0) {
return FP_ZERO;
}
return FP_SUBNORMAL;
} else if (exponent == exponent_max) {
if (mantissa == 0) {
return FP_INFINITE;
}
return FP_NAN;
}
return FP_NORMAL;
}
unsigned CountClearHalfWords(uint64_t imm, unsigned reg_size) {
VIXL_ASSERT((reg_size % 8) == 0);
int count = 0;
for (unsigned i = 0; i < (reg_size / 16); i++) {
if ((imm & 0xffff) == 0) {
count++;
}
imm >>= 16;
}
return count;
}
} // namespace vixl

View File

@@ -1,4 +1,4 @@
// Copyright 2013, ARM Limited
// Copyright 2015, ARM Limited
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
@@ -27,16 +27,17 @@
#ifndef VIXL_UTILS_H
#define VIXL_UTILS_H
#include <math.h>
#include <string.h>
#include "globals.h"
#include <cmath>
#include "vixl/globals.h"
#include "vixl/compiler-intrinsics.h"
namespace vixl {
// Macros for compile-time format checking.
#if defined(__GNUC__)
#if GCC_VERSION_OR_NEWER(4, 4, 0)
#define PRINTF_CHECK(format_index, varargs_index) \
__attribute__((format(printf, format_index, varargs_index)))
__attribute__((format(gnu_printf, format_index, varargs_index)))
#else
#define PRINTF_CHECK(format_index, varargs_index)
#endif
@@ -53,9 +54,9 @@ inline bool is_uintn(unsigned n, int64_t x) {
return !(x >> n);
}
inline unsigned truncate_to_intn(unsigned n, int64_t x) {
inline uint32_t truncate_to_intn(unsigned n, int64_t x) {
VIXL_ASSERT((0 < n) && (n < 64));
return (x & ((INT64_C(1) << n) - 1));
return static_cast<uint32_t>(x & ((INT64_C(1) << n) - 1));
}
#define INT_1_TO_63_LIST(V) \
@@ -73,7 +74,7 @@ inline bool is_int##N(int64_t x) { return is_intn(N, x); }
#define DECLARE_IS_UINT_N(N) \
inline bool is_uint##N(int64_t x) { return is_uintn(N, x); }
#define DECLARE_TRUNCATE_TO_INT_N(N) \
inline int truncate_to_int##N(int x) { return truncate_to_intn(N, x); }
inline uint32_t truncate_to_int##N(int x) { return truncate_to_intn(N, x); }
INT_1_TO_63_LIST(DECLARE_IS_INT_N)
INT_1_TO_63_LIST(DECLARE_IS_UINT_N)
INT_1_TO_63_LIST(DECLARE_TRUNCATE_TO_INT_N)
@@ -104,12 +105,24 @@ uint64_t double_to_rawbits(double value);
float rawbits_to_float(uint32_t bits);
double rawbits_to_double(uint64_t bits);
uint32_t float_sign(float val);
uint32_t float_exp(float val);
uint32_t float_mantissa(float val);
uint32_t double_sign(double val);
uint32_t double_exp(double val);
uint64_t double_mantissa(double val);
float float_pack(uint32_t sign, uint32_t exp, uint32_t mantissa);
double double_pack(uint64_t sign, uint64_t exp, uint64_t mantissa);
// An fpclassify() function for 16-bit half-precision floats.
int float16classify(float16 value);
// NaN tests.
inline bool IsSignallingNaN(double num) {
const uint64_t kFP64QuietNaNMask = UINT64_C(0x0008000000000000);
uint64_t raw = double_to_rawbits(num);
if (isnan(num) && ((raw & kFP64QuietNaNMask) == 0)) {
if (std::isnan(num) && ((raw & kFP64QuietNaNMask) == 0)) {
return true;
}
return false;
@@ -119,30 +132,37 @@ inline bool IsSignallingNaN(double num) {
inline bool IsSignallingNaN(float num) {
const uint32_t kFP32QuietNaNMask = 0x00400000;
uint32_t raw = float_to_rawbits(num);
if (isnan(num) && ((raw & kFP32QuietNaNMask) == 0)) {
if (std::isnan(num) && ((raw & kFP32QuietNaNMask) == 0)) {
return true;
}
return false;
}
inline bool IsSignallingNaN(float16 num) {
const uint16_t kFP16QuietNaNMask = 0x0200;
return (float16classify(num) == FP_NAN) &&
((num & kFP16QuietNaNMask) == 0);
}
template <typename T>
inline bool IsQuietNaN(T num) {
return isnan(num) && !IsSignallingNaN(num);
return std::isnan(num) && !IsSignallingNaN(num);
}
// Convert the NaN in 'num' to a quiet NaN.
inline double ToQuietNaN(double num) {
const uint64_t kFP64QuietNaNMask = UINT64_C(0x0008000000000000);
VIXL_ASSERT(isnan(num));
VIXL_ASSERT(std::isnan(num));
return rawbits_to_double(double_to_rawbits(num) | kFP64QuietNaNMask);
}
inline float ToQuietNaN(float num) {
const uint32_t kFP32QuietNaNMask = 0x00400000;
VIXL_ASSERT(isnan(num));
VIXL_ASSERT(std::isnan(num));
return rawbits_to_float(float_to_rawbits(num) | kFP32QuietNaNMask);
}
@@ -158,16 +178,71 @@ inline float FusedMultiplyAdd(float op1, float op2, float a) {
}
// Bit counting.
int CountLeadingZeros(uint64_t value, int width);
int CountLeadingSignBits(int64_t value, int width);
int CountTrailingZeros(uint64_t value, int width);
int CountSetBits(uint64_t value, int width);
uint64_t LowestSetBit(uint64_t value);
bool IsPowerOf2(int64_t value);
inline uint64_t LowestSetBit(uint64_t value) {
return value & -value;
}
template<typename T>
inline int HighestSetBitPosition(T value) {
VIXL_ASSERT(value != 0);
return (sizeof(value) * 8 - 1) - CountLeadingZeros(value);
}
template<typename V>
inline int WhichPowerOf2(V value) {
VIXL_ASSERT(IsPowerOf2(value));
return CountTrailingZeros(value);
}
unsigned CountClearHalfWords(uint64_t imm, unsigned reg_size);
template <typename T>
T ReverseBits(T value) {
VIXL_ASSERT((sizeof(value) == 1) || (sizeof(value) == 2) ||
(sizeof(value) == 4) || (sizeof(value) == 8));
T result = 0;
for (unsigned i = 0; i < (sizeof(value) * 8); i++) {
result = (result << 1) | (value & 1);
value >>= 1;
}
return result;
}
template <typename T>
T ReverseBytes(T value, int block_bytes_log2) {
VIXL_ASSERT((sizeof(value) == 4) || (sizeof(value) == 8));
VIXL_ASSERT((1U << block_bytes_log2) <= sizeof(value));
// Split the 64-bit value into an 8-bit array, where b[0] is the least
// significant byte, and b[7] is the most significant.
uint8_t bytes[8];
uint64_t mask = UINT64_C(0xff00000000000000);
for (int i = 7; i >= 0; i--) {
bytes[i] = (static_cast<uint64_t>(value) & mask) >> (i * 8);
mask >>= 8;
}
// Permutation tables for REV instructions.
// permute_table[0] is used by REV16_x, REV16_w
// permute_table[1] is used by REV32_x, REV_w
// permute_table[2] is used by REV_x
VIXL_ASSERT((0 < block_bytes_log2) && (block_bytes_log2 < 4));
static const uint8_t permute_table[3][8] = { {6, 7, 4, 5, 2, 3, 0, 1},
{4, 5, 6, 7, 0, 1, 2, 3},
{0, 1, 2, 3, 4, 5, 6, 7} };
T result = 0;
for (int i = 0; i < 8; i++) {
result <<= 8;
result |= bytes[permute_table[block_bytes_log2 - 1][i]];
}
return result;
}
// Pointer alignment
// TODO: rename/refactor to make it specific to instructions.
template<typename T>

View File

@@ -1,6 +1,6 @@
Block I/O error injection using blkdebug
----------------------------------------
Copyright (C) 2014 Red Hat Inc
Copyright (C) 2014-2015 Red Hat Inc
This work is licensed under the terms of the GNU GPL, version 2 or later. See
the COPYING file in the top-level directory.
@@ -92,8 +92,9 @@ The core events are:
flush_to_disk - flush the host block device's disk cache
See block/blkdebug.c:event_names[] for the full list of events. You may need
to grep block driver source code to understand the meaning of specific events.
See qapi/block-core.json:BlkdebugEvent for the full list of events.
You may need to grep block driver source code to understand the
meaning of specific events.
State transitions
-----------------

View File

@@ -23,9 +23,9 @@ A detailed command line would be:
-m 2G
-object memory-backend-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 -numa node,nodeid=0,cpus=0,memdev=ram-node0
-object memory-backend-ram,size=1024M,policy=bind,host-nodes=1,id=ram-node1 -numa node,nodeid=1,cpus=1,memdev=ram-node1
-device pxb,id=bridge1,bus=pci.0,numa_node=1,bus_nr=4 -netdev user,id=nd-device e1000,bus=bridge1,addr=0x4,netdev=nd
-device pxb,id=bridge2,bus=pci.0,numa_node=0,bus_nr=8,bus=pci.0 -device e1000,bus=bridge2,addr=0x3
-device pxb,id=bridge3,bus=pci.0,bus_nr=40,bus=pci.0 -drive if=none,id=drive0,file=[img] -device virtio-blk-pci,drive=drive0,scsi=off,bus=bridge3,addr=1
-device pxb,id=bridge1,bus=pci.0,numa_node=1,bus_nr=4 -netdev user,id=nd -device e1000,bus=bridge1,addr=0x4,netdev=nd
-device pxb,id=bridge2,bus=pci.0,numa_node=0,bus_nr=8, -device e1000,bus=bridge2,addr=0x3
-device pxb,id=bridge3,bus=pci.0,bus_nr=40, -drive if=none,id=drive0,file=[img] -device virtio-blk-pci,drive=drive0,scsi=off,bus=bridge3,addr=1
Here you have:
- 2 NUMA nodes for the guest, 0 and 1. (both mapped to the same NUMA node in host, but you can and should put it in different host NUMA nodes)

View File

@@ -118,17 +118,17 @@ tracking optional fields.
Any name (command, event, type, field, or enum value) beginning with
"x-" is marked experimental, and may be withdrawn or changed
incompatibly in a future release. Downstream vendors may add
extensions; such extensions should begin with a prefix matching
"__RFQDN_" (for the reverse-fully-qualified-domain-name of the
vendor), even if the rest of the name uses dash (example:
__com.redhat_drive-mirror). Other than downstream extensions (with
leading underscore and the use of dots), all names should begin with a
letter, and contain only ASCII letters, digits, dash, and underscore.
Names beginning with 'q_' are reserved for the generator: QMP names
that resemble C keywords or other problematic strings will be munged
in C to use this prefix. For example, a field named "default" in
qapi becomes "q_default" in the generated C code.
incompatibly in a future release. All names must begin with a letter,
and contain only ASCII letters, digits, dash, and underscore. There
are two exceptions: enum values may start with a digit, and any
extensions added by downstream vendors should start with a prefix
matching "__RFQDN_" (for the reverse-fully-qualified-domain-name of
the vendor), even if the rest of the name uses dash (example:
__com.redhat_drive-mirror). Names beginning with 'q_' are reserved
for the generator: QMP names that resemble C keywords or other
problematic strings will be munged in C to use this prefix. For
example, a field named "default" in qapi becomes "q_default" in the
generated C code.
In the rest of this document, usage lines are given for each
expression type, with literal strings written in lower case and
@@ -160,6 +160,7 @@ The following types are predefined, and map to C as follows:
accepts size suffixes
bool bool JSON true or false
any QObject * any JSON value
QType QType JSON string matching enum QType values
=== Includes ===
@@ -383,9 +384,6 @@ where each branch of the union names a QAPI type. For example:
'data': { 'definition': 'BlockdevOptions',
'reference': 'str' } }
Just like for a simple union, an implicit C enum 'NameKind' is created
to enumerate the branches for the alternate 'Name'.
Unlike a union, the discriminator string is never passed on the wire
for the Client JSON Protocol. Instead, the value's JSON type serves
as an implicit discriminator, which in turn means that an alternate
@@ -1053,7 +1051,7 @@ Example:
const char *const example_QAPIEvent_lookup[] = {
[EXAMPLE_QAPI_EVENT_MY_EVENT] = "MY_EVENT",
[EXAMPLE_QAPI_EVENT_MAX] = NULL,
[EXAMPLE_QAPI_EVENT__MAX] = NULL,
};
$ cat qapi-generated/example-qapi-event.h
[Uninteresting stuff omitted...]
@@ -1070,7 +1068,7 @@ Example:
typedef enum example_QAPIEvent {
EXAMPLE_QAPI_EVENT_MY_EVENT = 0,
EXAMPLE_QAPI_EVENT_MAX = 1,
EXAMPLE_QAPI_EVENT__MAX = 1,
} example_QAPIEvent;
extern const char *const example_QAPIEvent_lookup[];

View File

@@ -496,6 +496,20 @@ Example:
{"timestamp": {"seconds": 1432121972, "microseconds": 744001},
"event": "MIGRATION", "data": {"status": "completed"}}
MIGRATION_PASS
--------------
Emitted from the source side of a migration at the start of each pass
(when it syncs the dirty bitmap)
Data: None.
- "pass": An incrementing count (starting at 1 on the first pass)
Example:
{"timestamp": {"seconds": 1449669631, "microseconds": 239225},
"event": "MIGRATION_PASS", "data": {"pass": 2}}
STOP
----

View File

@@ -192,90 +192,7 @@ To check the result, read the "control" field:
today due to implementation not being async,
but may in the future).
= Host-side API =
The following functions are available to the QEMU programmer for adding
data to a fw_cfg device during guest initialization (see fw_cfg.h for
each function's complete prototype):
== fw_cfg_add_bytes() ==
Given a selector key value, starting pointer, and size, create an item
as a raw "blob" of the given size, available by selecting the given key.
The data referenced by the starting pointer is only linked, NOT copied,
into the data structure of the fw_cfg device.
== fw_cfg_add_string() ==
Instead of a starting pointer and size, this function accepts a pointer
to a NUL-terminated ascii string, and inserts a newly allocated copy of
the string (including the NUL terminator) into the fw_cfg device data
structure.
== fw_cfg_add_iXX() ==
Insert an XX-bit item, where XX may be 16, 32, or 64. These functions
will convert a 16-, 32-, or 64-bit integer to little-endian, then add
a dynamically allocated copy of the appropriately sized item to fw_cfg
under the given selector key value.
== fw_cfg_modify_iXX() ==
Modify the value of an XX-bit item (where XX may be 16, 32, or 64).
Similarly to the corresponding fw_cfg_add_iXX() function set, convert
a 16-, 32-, or 64-bit integer to little endian, create a dynamically
allocated copy of the required size, and replace the existing item at
the given selector key value with the newly allocated one. The previous
item, assumed to have been allocated during an earlier call to
fw_cfg_add_iXX() or fw_cfg_modify_iXX() (of the same width XX), is freed
before the function returns.
== fw_cfg_add_file() ==
Given a filename (i.e., fw_cfg item name), starting pointer, and size,
create an item as a raw "blob" of the given size. Unlike fw_cfg_add_bytes()
above, the next available selector key (above 0x0020, FW_CFG_FILE_FIRST)
will be used, and a new entry will be added to the file directory structure
(at key 0x0019), containing the item name, blob size, and automatically
assigned selector key value. The data referenced by the starting pointer
is only linked, NOT copied, into the fw_cfg data structure.
== fw_cfg_add_file_callback() ==
Like fw_cfg_add_file(), but additionally sets pointers to a callback
function (and opaque argument), which will be executed host-side by
QEMU each time a byte is read by the guest from this particular item.
NOTE: The callback function is given the opaque argument set by
fw_cfg_add_file_callback(), but also the current data offset,
allowing it the option of only acting upon specific offset values
(e.g., 0, before the first data byte of the selected item is
returned to the guest).
== fw_cfg_modify_file() ==
Given a filename (i.e., fw_cfg item name), starting pointer, and size,
completely replace the configuration item referenced by the given item
name with the new given blob. If an existing blob is found, its
callback information is removed, and a pointer to the old data is
returned to allow the caller to free it, helping avoid memory leaks.
If a configuration item does not already exist under the given item
name, a new item will be created as with fw_cfg_add_file(), and NULL
is returned to the caller. In any case, the data referenced by the
starting pointer is only linked, NOT copied, into the fw_cfg data
structure.
== fw_cfg_add_callback() ==
Like fw_cfg_add_bytes(), but additionally sets pointers to a callback
function (and opaque argument), which will be executed host-side by
QEMU each time a guest-side write operation to this particular item
completes fully overwriting the item's data.
NOTE: This function is deprecated, and will be completely removed
starting with QEMU v2.4.
== Externally Provided Items ==
= Externally Provided Items =
As of v2.4, "file" fw_cfg items (i.e., items with selector keys above
FW_CFG_FILE_FIRST, and with a corresponding entry in the fw_cfg file

228
docs/specs/parallels.txt Normal file
View File

@@ -0,0 +1,228 @@
= License =
Copyright (c) 2015 Denis Lunev
Copyright (c) 2015 Vladimir Sementsov-Ogievskiy
This work is licensed under the terms of the GNU GPL, version 2 or later.
See the COPYING file in the top-level directory.
= Parallels Expandable Image File Format =
A Parallels expandable image file consists of three consecutive parts:
* header
* BAT
* data area
All numbers in a Parallels expandable image are stored in little-endian byte
order.
== Definitions ==
Sector A 512-byte data chunk.
Cluster A data chunk of the size specified in the image header.
Currently, the default size is 1MiB (2048 sectors). In previous
versions, cluster sizes of 63 sectors, 256 and 252 kilobytes were
used.
BAT Block Allocation Table, an entity that contains information for
guest-to-host I/O data address translation.
== Header ==
The header is placed at the start of an image and contains the following
fields:
Bytes:
0 - 15: magic
Must contain "WithoutFreeSpace" or "WithouFreSpacExt".
16 - 19: version
Must be 2.
20 - 23: heads
Disk geometry parameter for guest.
24 - 27: cylinders
Disk geometry parameter for guest.
28 - 31: tracks
Cluster size, in sectors.
32 - 35: nb_bat_entries
Disk size, in clusters (BAT size).
36 - 43: nb_sectors
Disk size, in sectors.
For "WithoutFreeSpace" images:
Only the lowest 4 bytes are used. The highest 4 bytes must be
cleared in this case.
For "WithouFreSpacExt" images, there are no such
restrictions.
44 - 47: in_use
Set to 0x746F6E59 when the image is opened by software in R/W
mode; set to 0x312e3276 when the image is closed.
A zero in this field means that the image was opened by an old
version of the software that doesn't support Format Extension
(see below).
Other values are not allowed.
48 - 51: data_off
An offset, in sectors, from the start of the file to the start of
the data area.
For "WithoutFreeSpace" images:
- If data_off is zero, the offset is calculated as the end of BAT
table plus some padding to ensure sector size alignment.
- If data_off is non-zero, the offset should be aligned to sector
size. However it is recommended to align it to cluster size for
newly created images.
For "WithouFreSpacExt" images:
data_off must be non-zero and aligned to cluster size.
52 - 55: flags
Miscellaneous flags.
Bit 0: Empty Image bit. If set, the image should be
considered clear.
Bits 2-31: Unused.
56 - 63: ext_off
Format Extension offset, an offset, in sectors, from the start of
the file to the start of the Format Extension Cluster.
ext_off must meet the same requirements as cluster offsets
defined by BAT entries (see below).
== BAT ==
BAT is placed immediately after the image header. In the file, BAT is a
contiguous array of 32-bit unsigned little-endian integers with
(bat_entries * 4) bytes size.
Each BAT entry contains an offset from the start of the file to the
corresponding cluster. The offset set in clusters for "WithouFreSpacExt" images
and in sectors for "WithoutFreeSpace" images.
If a BAT entry is zero, the corresponding cluster is not allocated and should
be considered as filled with zeroes.
Cluster offsets specified by BAT entries must meet the following requirements:
- the value must not be lower than data offset (provided by header.data_off
or calculated as specified above),
- the value must be lower than the desired file size,
- the value must be unique among all BAT entries,
- the result of (cluster offset - data offset) must be aligned to cluster
size.
== Data Area ==
The data area is an area from the data offset (provided by header.data_off or
calculated as specified above) to the end of the file. It represents a
contiguous array of clusters. Most of them are allocated by the BAT, some may
be allocated by the ext_off field in the header while other may be allocated by
extensions. All clusters allocated by ext_off and extensions should meet the
same requirements as clusters specified by BAT entries.
== Format Extension ==
The Format Extension is an area 1 cluster in size that provides additional
format features. This cluster is addressed by the ext_off field in the header.
The format of the Format Extension area is the following:
0 - 7: magic
Must be 0xAB234CEF23DCEA87
8 - 23: m_CheckSum
The MD5 checksum of the entire Header Extension cluster except
the first 24 bytes.
The above are followed by feature sections or "extensions". The last
extension must be "End of features" (see below).
Each feature section has the following format:
0 - 7: magic
The identifier of the feature:
0x0000000000000000 - End of features
0x20385FAE252CB34A - Dirty bitmap
8 - 15: flags
External flags for extension:
Bit 0: NECESSARY
If the software cannot load the extension (due to an
unknown magic number or error), the file should not be
changed. If this flag is unset and there is an error on
loading the extension, said extension should be dropped.
Bit 1: TRANSIT
If there is an unknown extension with this flag set,
said extension should be left as is.
If neither NECESSARY nor TRANSIT are set, the extension should be
dropped.
16 - 19: data_size
The size of the following feature data, in bytes.
20 - 23: unused32
Align header to 8 bytes boundary.
variable: data (data_size bytes)
The above is followed by padding to the next 8 bytes boundary, then the
next extension starts.
The last extension must be "End of features" with all the fields set to 0.
=== Dirty bitmaps feature ===
This feature provides a way of storing dirty bitmaps in the image. The fields
of its data area are:
0 - 7: size
The bitmap size, should be equal to disk size in sectors.
8 - 23: id
An identifier for backup consistency checking.
24 - 27: granularity
Bitmap granularity, in sectors. I.e., the number of sectors
corresponding to one bit of the bitmap. Granularity must be
a power of 2.
28 - 31: l1_size
The number of entries in the L1 table of the bitmap.
variable: l1 (64 * l1_size bytes)
L1 offset table (in bytes)
A dirty bitmap is stored using a one-level structure for the mapping to host
clusters - an L1 table.
Given an offset in bytes into the bitmap data, the offset in bytes into the
image file can be obtained as follows:
offset = l1_table[offset / cluster_size] + (offset % cluster_size)
If an L1 table entry is 0, the corresponding cluster of the bitmap is assumed
to be zero.
If an L1 table entry is 1, the corresponding cluster of the bitmap is assumed
to have all bits set.
If an L1 table entry is not 0 or 1, it allocates a cluster from the data area.

131
dump.c
View File

@@ -347,18 +347,18 @@ static void write_memory(DumpState *s, GuestPhysBlock *block, ram_addr_t start,
int64_t i;
Error *local_err = NULL;
for (i = 0; i < size / TARGET_PAGE_SIZE; i++) {
write_data(s, block->host_addr + start + i * TARGET_PAGE_SIZE,
TARGET_PAGE_SIZE, &local_err);
for (i = 0; i < size / s->dump_info.page_size; i++) {
write_data(s, block->host_addr + start + i * s->dump_info.page_size,
s->dump_info.page_size, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
}
if ((size % TARGET_PAGE_SIZE) != 0) {
write_data(s, block->host_addr + start + i * TARGET_PAGE_SIZE,
size % TARGET_PAGE_SIZE, &local_err);
if ((size % s->dump_info.page_size) != 0) {
write_data(s, block->host_addr + start + i * s->dump_info.page_size,
size % s->dump_info.page_size, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
@@ -737,7 +737,7 @@ static void create_header32(DumpState *s, Error **errp)
strncpy(dh->signature, KDUMP_SIGNATURE, strlen(KDUMP_SIGNATURE));
dh->header_version = cpu_to_dump32(s, 6);
block_size = TARGET_PAGE_SIZE;
block_size = s->dump_info.page_size;
dh->block_size = cpu_to_dump32(s, block_size);
sub_hdr_size = sizeof(struct KdumpSubHeader32) + s->note_size;
sub_hdr_size = DIV_ROUND_UP(sub_hdr_size, block_size);
@@ -775,7 +775,7 @@ static void create_header32(DumpState *s, Error **errp)
/* 64bit max_mapnr_64 */
kh->max_mapnr_64 = cpu_to_dump64(s, s->max_mapnr);
kh->phys_base = cpu_to_dump32(s, PHYS_BASE);
kh->phys_base = cpu_to_dump32(s, s->dump_info.phys_base);
kh->dump_level = cpu_to_dump32(s, DUMP_LEVEL);
offset_note = DISKDUMP_HEADER_BLOCKS * block_size + size;
@@ -837,7 +837,7 @@ static void create_header64(DumpState *s, Error **errp)
strncpy(dh->signature, KDUMP_SIGNATURE, strlen(KDUMP_SIGNATURE));
dh->header_version = cpu_to_dump32(s, 6);
block_size = TARGET_PAGE_SIZE;
block_size = s->dump_info.page_size;
dh->block_size = cpu_to_dump32(s, block_size);
sub_hdr_size = sizeof(struct KdumpSubHeader64) + s->note_size;
sub_hdr_size = DIV_ROUND_UP(sub_hdr_size, block_size);
@@ -875,7 +875,7 @@ static void create_header64(DumpState *s, Error **errp)
/* 64bit max_mapnr_64 */
kh->max_mapnr_64 = cpu_to_dump64(s, s->max_mapnr);
kh->phys_base = cpu_to_dump64(s, PHYS_BASE);
kh->phys_base = cpu_to_dump64(s, s->dump_info.phys_base);
kh->dump_level = cpu_to_dump32(s, DUMP_LEVEL);
offset_note = DISKDUMP_HEADER_BLOCKS * block_size + size;
@@ -933,6 +933,11 @@ static void write_dump_header(DumpState *s, Error **errp)
}
}
static size_t dump_bitmap_get_bufsize(DumpState *s)
{
return s->dump_info.page_size;
}
/*
* set dump_bitmap sequencely. the bit before last_pfn is not allowed to be
* rewritten, so if need to set the first bit, set last_pfn and pfn to 0.
@@ -946,6 +951,8 @@ static int set_dump_bitmap(uint64_t last_pfn, uint64_t pfn, bool value,
off_t old_offset, new_offset;
off_t offset_bitmap1, offset_bitmap2;
uint32_t byte, bit;
size_t bitmap_bufsize = dump_bitmap_get_bufsize(s);
size_t bits_per_buf = bitmap_bufsize * CHAR_BIT;
/* should not set the previous place */
assert(last_pfn <= pfn);
@@ -956,14 +963,14 @@ static int set_dump_bitmap(uint64_t last_pfn, uint64_t pfn, bool value,
* making new_offset be bigger than old_offset can also sync remained data
* into vmcore.
*/
old_offset = BUFSIZE_BITMAP * (last_pfn / PFN_BUFBITMAP);
new_offset = BUFSIZE_BITMAP * (pfn / PFN_BUFBITMAP);
old_offset = bitmap_bufsize * (last_pfn / bits_per_buf);
new_offset = bitmap_bufsize * (pfn / bits_per_buf);
while (old_offset < new_offset) {
/* calculate the offset and write dump_bitmap */
offset_bitmap1 = s->offset_dump_bitmap + old_offset;
if (write_buffer(s->fd, offset_bitmap1, buf,
BUFSIZE_BITMAP) < 0) {
bitmap_bufsize) < 0) {
return -1;
}
@@ -971,17 +978,17 @@ static int set_dump_bitmap(uint64_t last_pfn, uint64_t pfn, bool value,
offset_bitmap2 = s->offset_dump_bitmap + s->len_dump_bitmap +
old_offset;
if (write_buffer(s->fd, offset_bitmap2, buf,
BUFSIZE_BITMAP) < 0) {
bitmap_bufsize) < 0) {
return -1;
}
memset(buf, 0, BUFSIZE_BITMAP);
old_offset += BUFSIZE_BITMAP;
memset(buf, 0, bitmap_bufsize);
old_offset += bitmap_bufsize;
}
/* get the exact place of the bit in the buf, and set it */
byte = (pfn % PFN_BUFBITMAP) / CHAR_BIT;
bit = (pfn % PFN_BUFBITMAP) % CHAR_BIT;
byte = (pfn % bits_per_buf) / CHAR_BIT;
bit = (pfn % bits_per_buf) % CHAR_BIT;
if (value) {
buf[byte] |= 1u << bit;
} else {
@@ -991,6 +998,20 @@ static int set_dump_bitmap(uint64_t last_pfn, uint64_t pfn, bool value,
return 0;
}
static uint64_t dump_paddr_to_pfn(DumpState *s, uint64_t addr)
{
int target_page_shift = ctz32(s->dump_info.page_size);
return (addr >> target_page_shift) - ARCH_PFN_OFFSET;
}
static uint64_t dump_pfn_to_paddr(DumpState *s, uint64_t pfn)
{
int target_page_shift = ctz32(s->dump_info.page_size);
return (pfn + ARCH_PFN_OFFSET) << target_page_shift;
}
/*
* exam every page and return the page frame number and the address of the page.
* bufptr can be NULL. note: the blocks here is supposed to reflect guest-phys
@@ -1001,16 +1022,16 @@ static bool get_next_page(GuestPhysBlock **blockptr, uint64_t *pfnptr,
uint8_t **bufptr, DumpState *s)
{
GuestPhysBlock *block = *blockptr;
hwaddr addr;
hwaddr addr, target_page_mask = ~((hwaddr)s->dump_info.page_size - 1);
uint8_t *buf;
/* block == NULL means the start of the iteration */
if (!block) {
block = QTAILQ_FIRST(&s->guest_phys_blocks.head);
*blockptr = block;
assert((block->target_start & ~TARGET_PAGE_MASK) == 0);
assert((block->target_end & ~TARGET_PAGE_MASK) == 0);
*pfnptr = paddr_to_pfn(block->target_start);
assert((block->target_start & ~target_page_mask) == 0);
assert((block->target_end & ~target_page_mask) == 0);
*pfnptr = dump_paddr_to_pfn(s, block->target_start);
if (bufptr) {
*bufptr = block->host_addr;
}
@@ -1018,10 +1039,10 @@ static bool get_next_page(GuestPhysBlock **blockptr, uint64_t *pfnptr,
}
*pfnptr = *pfnptr + 1;
addr = pfn_to_paddr(*pfnptr);
addr = dump_pfn_to_paddr(s, *pfnptr);
if ((addr >= block->target_start) &&
(addr + TARGET_PAGE_SIZE <= block->target_end)) {
(addr + s->dump_info.page_size <= block->target_end)) {
buf = block->host_addr + (addr - block->target_start);
} else {
/* the next page is in the next block */
@@ -1030,9 +1051,9 @@ static bool get_next_page(GuestPhysBlock **blockptr, uint64_t *pfnptr,
if (!block) {
return false;
}
assert((block->target_start & ~TARGET_PAGE_MASK) == 0);
assert((block->target_end & ~TARGET_PAGE_MASK) == 0);
*pfnptr = paddr_to_pfn(block->target_start);
assert((block->target_start & ~target_page_mask) == 0);
assert((block->target_end & ~target_page_mask) == 0);
*pfnptr = dump_paddr_to_pfn(s, block->target_start);
buf = block->host_addr;
}
@@ -1050,9 +1071,11 @@ static void write_dump_bitmap(DumpState *s, Error **errp)
void *dump_bitmap_buf;
size_t num_dumpable;
GuestPhysBlock *block_iter = NULL;
size_t bitmap_bufsize = dump_bitmap_get_bufsize(s);
size_t bits_per_buf = bitmap_bufsize * CHAR_BIT;
/* dump_bitmap_buf is used to store dump_bitmap temporarily */
dump_bitmap_buf = g_malloc0(BUFSIZE_BITMAP);
dump_bitmap_buf = g_malloc0(bitmap_bufsize);
num_dumpable = 0;
last_pfn = 0;
@@ -1074,11 +1097,11 @@ static void write_dump_bitmap(DumpState *s, Error **errp)
/*
* set_dump_bitmap will always leave the recently set bit un-sync. Here we
* set last_pfn + PFN_BUFBITMAP to 0 and those set but un-sync bit will be
* synchronized into vmcore.
* set the remaining bits from last_pfn to the end of the bitmap buffer to
* 0. With those set, the un-sync bit will be synchronized into the vmcore.
*/
if (num_dumpable > 0) {
ret = set_dump_bitmap(last_pfn, last_pfn + PFN_BUFBITMAP, false,
ret = set_dump_bitmap(last_pfn, last_pfn + bits_per_buf, false,
dump_bitmap_buf, s);
if (ret < 0) {
dump_error(s, "dump: failed to sync dump_bitmap", errp);
@@ -1098,8 +1121,8 @@ static void prepare_data_cache(DataCache *data_cache, DumpState *s,
{
data_cache->fd = s->fd;
data_cache->data_size = 0;
data_cache->buf_size = BUFSIZE_DATA_CACHE;
data_cache->buf = g_malloc0(BUFSIZE_DATA_CACHE);
data_cache->buf_size = 4 * dump_bitmap_get_bufsize(s);
data_cache->buf = g_malloc0(data_cache->buf_size);
data_cache->offset = offset;
}
@@ -1193,7 +1216,7 @@ static void write_dump_pages(DumpState *s, Error **errp)
prepare_data_cache(&page_data, s, offset_data);
/* prepare buffer to store compressed data */
len_buf_out = get_len_buf_out(TARGET_PAGE_SIZE, s->flag_compress);
len_buf_out = get_len_buf_out(s->dump_info.page_size, s->flag_compress);
assert(len_buf_out != 0);
#ifdef CONFIG_LZO
@@ -1206,19 +1229,19 @@ static void write_dump_pages(DumpState *s, Error **errp)
* init zero page's page_desc and page_data, because every zero page
* uses the same page_data
*/
pd_zero.size = cpu_to_dump32(s, TARGET_PAGE_SIZE);
pd_zero.size = cpu_to_dump32(s, s->dump_info.page_size);
pd_zero.flags = cpu_to_dump32(s, 0);
pd_zero.offset = cpu_to_dump64(s, offset_data);
pd_zero.page_flags = cpu_to_dump64(s, 0);
buf = g_malloc0(TARGET_PAGE_SIZE);
ret = write_cache(&page_data, buf, TARGET_PAGE_SIZE, false);
buf = g_malloc0(s->dump_info.page_size);
ret = write_cache(&page_data, buf, s->dump_info.page_size, false);
g_free(buf);
if (ret < 0) {
dump_error(s, "dump: failed to write page data (zero page)", errp);
goto out;
}
offset_data += TARGET_PAGE_SIZE;
offset_data += s->dump_info.page_size;
/*
* dump memory to vmcore page by page. zero page will all be resided in the
@@ -1226,7 +1249,7 @@ static void write_dump_pages(DumpState *s, Error **errp)
*/
while (get_next_page(&block_iter, &pfn_iter, &buf, s)) {
/* check zero page */
if (is_zero_page(buf, TARGET_PAGE_SIZE)) {
if (is_zero_page(buf, s->dump_info.page_size)) {
ret = write_cache(&page_desc, &pd_zero, sizeof(PageDescriptor),
false);
if (ret < 0) {
@@ -1248,8 +1271,8 @@ static void write_dump_pages(DumpState *s, Error **errp)
size_out = len_buf_out;
if ((s->flag_compress & DUMP_DH_COMPRESSED_ZLIB) &&
(compress2(buf_out, (uLongf *)&size_out, buf,
TARGET_PAGE_SIZE, Z_BEST_SPEED) == Z_OK) &&
(size_out < TARGET_PAGE_SIZE)) {
s->dump_info.page_size, Z_BEST_SPEED) == Z_OK) &&
(size_out < s->dump_info.page_size)) {
pd.flags = cpu_to_dump32(s, DUMP_DH_COMPRESSED_ZLIB);
pd.size = cpu_to_dump32(s, size_out);
@@ -1260,9 +1283,9 @@ static void write_dump_pages(DumpState *s, Error **errp)
}
#ifdef CONFIG_LZO
} else if ((s->flag_compress & DUMP_DH_COMPRESSED_LZO) &&
(lzo1x_1_compress(buf, TARGET_PAGE_SIZE, buf_out,
(lzo1x_1_compress(buf, s->dump_info.page_size, buf_out,
(lzo_uint *)&size_out, wrkmem) == LZO_E_OK) &&
(size_out < TARGET_PAGE_SIZE)) {
(size_out < s->dump_info.page_size)) {
pd.flags = cpu_to_dump32(s, DUMP_DH_COMPRESSED_LZO);
pd.size = cpu_to_dump32(s, size_out);
@@ -1274,9 +1297,9 @@ static void write_dump_pages(DumpState *s, Error **errp)
#endif
#ifdef CONFIG_SNAPPY
} else if ((s->flag_compress & DUMP_DH_COMPRESSED_SNAPPY) &&
(snappy_compress((char *)buf, TARGET_PAGE_SIZE,
(snappy_compress((char *)buf, s->dump_info.page_size,
(char *)buf_out, &size_out) == SNAPPY_OK) &&
(size_out < TARGET_PAGE_SIZE)) {
(size_out < s->dump_info.page_size)) {
pd.flags = cpu_to_dump32(s, DUMP_DH_COMPRESSED_SNAPPY);
pd.size = cpu_to_dump32(s, size_out);
@@ -1289,13 +1312,14 @@ static void write_dump_pages(DumpState *s, Error **errp)
} else {
/*
* fall back to save in plaintext, size_out should be
* assigned TARGET_PAGE_SIZE
* assigned the target's page size
*/
pd.flags = cpu_to_dump32(s, 0);
size_out = TARGET_PAGE_SIZE;
size_out = s->dump_info.page_size;
pd.size = cpu_to_dump32(s, size_out);
ret = write_cache(&page_data, buf, TARGET_PAGE_SIZE, false);
ret = write_cache(&page_data, buf,
s->dump_info.page_size, false);
if (ret < 0) {
dump_error(s, "dump: failed to write page data", errp);
goto out;
@@ -1430,7 +1454,7 @@ static void get_max_mapnr(DumpState *s)
GuestPhysBlock *last_block;
last_block = QTAILQ_LAST(&s->guest_phys_blocks.head, GuestPhysBlockHead);
s->max_mapnr = paddr_to_pfn(last_block->target_end);
s->max_mapnr = dump_paddr_to_pfn(s, last_block->target_end);
}
static void dump_init(DumpState *s, int fd, bool has_format,
@@ -1489,6 +1513,10 @@ static void dump_init(DumpState *s, int fd, bool has_format,
goto cleanup;
}
if (!s->dump_info.page_size) {
s->dump_info.page_size = TARGET_PAGE_SIZE;
}
s->note_size = cpu_get_note_size(s->dump_info.d_class,
s->dump_info.d_machine, nr_cpus);
if (s->note_size < 0) {
@@ -1512,8 +1540,9 @@ static void dump_init(DumpState *s, int fd, bool has_format,
get_max_mapnr(s);
uint64_t tmp;
tmp = DIV_ROUND_UP(DIV_ROUND_UP(s->max_mapnr, CHAR_BIT), TARGET_PAGE_SIZE);
s->len_dump_bitmap = tmp * TARGET_PAGE_SIZE;
tmp = DIV_ROUND_UP(DIV_ROUND_UP(s->max_mapnr, CHAR_BIT),
s->dump_info.page_size);
s->len_dump_bitmap = tmp * s->dump_info.page_size;
/* init for kdump-compressed format */
if (has_format && format != DUMP_GUEST_MEMORY_FORMAT_ELF) {

375
exec.c
View File

@@ -88,9 +88,6 @@ static MemoryRegion io_mem_unassigned;
*/
#define RAM_RESIZEABLE (1 << 2)
/* RAM is backed by an mmapped file.
*/
#define RAM_FILE (1 << 3)
#endif
struct CPUTailQ cpus = QTAILQ_HEAD_INITIALIZER(cpus);
@@ -393,18 +390,6 @@ address_space_translate_internal(AddressSpaceDispatch *d, hwaddr addr, hwaddr *x
return section;
}
static inline bool memory_access_is_direct(MemoryRegion *mr, bool is_write)
{
if (memory_region_is_ram(mr)) {
return !(is_write && mr->readonly);
}
if (memory_region_is_romd(mr)) {
return !is_write;
}
return false;
}
/* Called from RCU critical section */
MemoryRegion *address_space_translate(AddressSpace *as, hwaddr addr,
hwaddr *xlat, hwaddr *plen,
@@ -873,7 +858,7 @@ void cpu_abort(CPUState *cpu, const char *fmt, ...)
vfprintf(stderr, fmt, ap);
fprintf(stderr, "\n");
cpu_dump_state(cpu, stderr, fprintf, CPU_DUMP_FPU | CPU_DUMP_CCOP);
if (qemu_log_enabled()) {
if (qemu_log_separate()) {
qemu_log("qemu: fatal: ");
qemu_log_vprintf(fmt, ap2);
qemu_log("\n");
@@ -1601,7 +1586,6 @@ ram_addr_t qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
new_block->used_length = size;
new_block->max_length = size;
new_block->flags = share ? RAM_SHARED : 0;
new_block->flags |= RAM_FILE;
new_block->host = file_ram_alloc(new_block, size,
mem_path, errp);
if (!new_block->host) {
@@ -1676,25 +1660,6 @@ ram_addr_t qemu_ram_alloc_resizeable(ram_addr_t size, ram_addr_t maxsz,
return qemu_ram_alloc_internal(size, maxsz, resized, NULL, true, mr, errp);
}
void qemu_ram_free_from_ptr(ram_addr_t addr)
{
RAMBlock *block;
qemu_mutex_lock_ramlist();
QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (addr == block->offset) {
QLIST_REMOVE_RCU(block, next);
ram_list.mru_block = NULL;
/* Write list before version */
smp_wmb();
ram_list.version++;
g_free_rcu(block, rcu);
break;
}
}
qemu_mutex_unlock_ramlist();
}
static void reclaim_ramblock(RAMBlock *block)
{
if (block->flags & RAM_PREALLOC) {
@@ -1703,11 +1668,7 @@ static void reclaim_ramblock(RAMBlock *block)
xen_invalidate_map_cache_entry(block->host);
#ifndef _WIN32
} else if (block->fd >= 0) {
if (block->flags & RAM_FILE) {
qemu_ram_munmap(block->host, block->max_length);
} else {
munmap(block->host, block->max_length);
}
qemu_ram_munmap(block->host, block->max_length);
close(block->fd);
#endif
} else {
@@ -1796,6 +1757,16 @@ int qemu_get_ram_fd(ram_addr_t addr)
return fd;
}
void qemu_set_ram_fd(ram_addr_t addr, int fd)
{
RAMBlock *block;
rcu_read_lock();
block = qemu_get_ram_block(addr);
block->fd = fd;
rcu_read_unlock();
}
void *qemu_get_ram_block_host_ptr(ram_addr_t addr)
{
RAMBlock *block;
@@ -1813,19 +1784,11 @@ void *qemu_get_ram_block_host_ptr(ram_addr_t addr)
* or address_space_rw instead. For local memory (e.g. video ram) that the
* device owns, use memory_region_get_ram_ptr.
*
* By the time this function returns, the returned pointer is not protected
* by RCU anymore. If the caller is not within an RCU critical section and
* does not hold the iothread lock, it must have other means of protecting the
* pointer, such as a reference to the region that includes the incoming
* ram_addr_t.
* Called within RCU critical section.
*/
void *qemu_get_ram_ptr(ram_addr_t addr)
{
RAMBlock *block;
void *ptr;
rcu_read_lock();
block = qemu_get_ram_block(addr);
RAMBlock *block = qemu_get_ram_block(addr);
if (xen_enabled() && block->host == NULL) {
/* We need to check if the requested address is in the RAM
@@ -1833,52 +1796,44 @@ void *qemu_get_ram_ptr(ram_addr_t addr)
* In that case just map until the end of the page.
*/
if (block->offset == 0) {
ptr = xen_map_cache(addr, 0, 0);
goto unlock;
return xen_map_cache(addr, 0, 0);
}
block->host = xen_map_cache(block->offset, block->max_length, 1);
}
ptr = ramblock_ptr(block, addr - block->offset);
unlock:
rcu_read_unlock();
return ptr;
return ramblock_ptr(block, addr - block->offset);
}
/* Return a host pointer to guest's ram. Similar to qemu_get_ram_ptr
* but takes a size argument.
*
* By the time this function returns, the returned pointer is not protected
* by RCU anymore. If the caller is not within an RCU critical section and
* does not hold the iothread lock, it must have other means of protecting the
* pointer, such as a reference to the region that includes the incoming
* ram_addr_t.
* Called within RCU critical section.
*/
static void *qemu_ram_ptr_length(ram_addr_t addr, hwaddr *size)
{
void *ptr;
RAMBlock *block;
ram_addr_t offset_inside_block;
if (*size == 0) {
return NULL;
}
if (xen_enabled()) {
return xen_map_cache(addr, *size, 1);
} else {
RAMBlock *block;
rcu_read_lock();
QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (addr - block->offset < block->max_length) {
if (addr - block->offset + *size > block->max_length)
*size = block->max_length - addr + block->offset;
ptr = ramblock_ptr(block, addr - block->offset);
rcu_read_unlock();
return ptr;
}
block = qemu_get_ram_block(addr);
offset_inside_block = addr - block->offset;
*size = MIN(*size, block->max_length - offset_inside_block);
if (xen_enabled() && block->host == NULL) {
/* We need to check if the requested address is in the RAM
* because we don't want to map the entire memory in QEMU.
* In that case just map the requested area.
*/
if (block->offset == 0) {
return xen_map_cache(addr, *size, 1);
}
fprintf(stderr, "Bad ram offset %" PRIx64 "\n", (uint64_t)addr);
abort();
block->host = xen_map_cache(block->offset, block->max_length, 1);
}
return ramblock_ptr(block, offset_inside_block);
}
/*
@@ -1981,6 +1936,7 @@ MemoryRegion *qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr)
return block->mr;
}
/* Called within RCU critical section. */
static void notdirty_mem_write(void *opaque, hwaddr ram_addr,
uint64_t val, unsigned size)
{
@@ -2511,101 +2467,58 @@ static bool prepare_mmio_access(MemoryRegion *mr)
return release_lock;
}
MemTxResult address_space_rw(AddressSpace *as, hwaddr addr, MemTxAttrs attrs,
uint8_t *buf, int len, bool is_write)
/* Called within RCU critical section. */
static MemTxResult address_space_write_continue(AddressSpace *as, hwaddr addr,
MemTxAttrs attrs,
const uint8_t *buf,
int len, hwaddr addr1,
hwaddr l, MemoryRegion *mr)
{
hwaddr l;
uint8_t *ptr;
uint64_t val;
hwaddr addr1;
MemoryRegion *mr;
MemTxResult result = MEMTX_OK;
bool release_lock = false;
rcu_read_lock();
while (len > 0) {
l = len;
mr = address_space_translate(as, addr, &addr1, &l, is_write);
if (is_write) {
if (!memory_access_is_direct(mr, is_write)) {
release_lock |= prepare_mmio_access(mr);
l = memory_access_size(mr, l, addr1);
/* XXX: could force current_cpu to NULL to avoid
potential bugs */
switch (l) {
case 8:
/* 64 bit write access */
val = ldq_p(buf);
result |= memory_region_dispatch_write(mr, addr1, val, 8,
attrs);
break;
case 4:
/* 32 bit write access */
val = ldl_p(buf);
result |= memory_region_dispatch_write(mr, addr1, val, 4,
attrs);
break;
case 2:
/* 16 bit write access */
val = lduw_p(buf);
result |= memory_region_dispatch_write(mr, addr1, val, 2,
attrs);
break;
case 1:
/* 8 bit write access */
val = ldub_p(buf);
result |= memory_region_dispatch_write(mr, addr1, val, 1,
attrs);
break;
default:
abort();
}
} else {
addr1 += memory_region_get_ram_addr(mr);
/* RAM case */
ptr = qemu_get_ram_ptr(addr1);
memcpy(ptr, buf, l);
invalidate_and_set_dirty(mr, addr1, l);
for (;;) {
if (!memory_access_is_direct(mr, true)) {
release_lock |= prepare_mmio_access(mr);
l = memory_access_size(mr, l, addr1);
/* XXX: could force current_cpu to NULL to avoid
potential bugs */
switch (l) {
case 8:
/* 64 bit write access */
val = ldq_p(buf);
result |= memory_region_dispatch_write(mr, addr1, val, 8,
attrs);
break;
case 4:
/* 32 bit write access */
val = ldl_p(buf);
result |= memory_region_dispatch_write(mr, addr1, val, 4,
attrs);
break;
case 2:
/* 16 bit write access */
val = lduw_p(buf);
result |= memory_region_dispatch_write(mr, addr1, val, 2,
attrs);
break;
case 1:
/* 8 bit write access */
val = ldub_p(buf);
result |= memory_region_dispatch_write(mr, addr1, val, 1,
attrs);
break;
default:
abort();
}
} else {
if (!memory_access_is_direct(mr, is_write)) {
/* I/O case */
release_lock |= prepare_mmio_access(mr);
l = memory_access_size(mr, l, addr1);
switch (l) {
case 8:
/* 64 bit read access */
result |= memory_region_dispatch_read(mr, addr1, &val, 8,
attrs);
stq_p(buf, val);
break;
case 4:
/* 32 bit read access */
result |= memory_region_dispatch_read(mr, addr1, &val, 4,
attrs);
stl_p(buf, val);
break;
case 2:
/* 16 bit read access */
result |= memory_region_dispatch_read(mr, addr1, &val, 2,
attrs);
stw_p(buf, val);
break;
case 1:
/* 8 bit read access */
result |= memory_region_dispatch_read(mr, addr1, &val, 1,
attrs);
stb_p(buf, val);
break;
default:
abort();
}
} else {
/* RAM case */
ptr = qemu_get_ram_ptr(mr->ram_addr + addr1);
memcpy(buf, ptr, l);
}
addr1 += memory_region_get_ram_addr(mr);
/* RAM case */
ptr = qemu_get_ram_ptr(addr1);
memcpy(ptr, buf, l);
invalidate_and_set_dirty(mr, addr1, l);
}
if (release_lock) {
@@ -2616,8 +2529,14 @@ MemTxResult address_space_rw(AddressSpace *as, hwaddr addr, MemTxAttrs attrs,
len -= l;
buf += l;
addr += l;
if (!len) {
break;
}
l = len;
mr = address_space_translate(as, addr, &addr1, &l, true);
}
rcu_read_unlock();
return result;
}
@@ -2625,15 +2544,122 @@ MemTxResult address_space_rw(AddressSpace *as, hwaddr addr, MemTxAttrs attrs,
MemTxResult address_space_write(AddressSpace *as, hwaddr addr, MemTxAttrs attrs,
const uint8_t *buf, int len)
{
return address_space_rw(as, addr, attrs, (uint8_t *)buf, len, true);
hwaddr l;
hwaddr addr1;
MemoryRegion *mr;
MemTxResult result = MEMTX_OK;
if (len > 0) {
rcu_read_lock();
l = len;
mr = address_space_translate(as, addr, &addr1, &l, true);
result = address_space_write_continue(as, addr, attrs, buf, len,
addr1, l, mr);
rcu_read_unlock();
}
return result;
}
MemTxResult address_space_read(AddressSpace *as, hwaddr addr, MemTxAttrs attrs,
uint8_t *buf, int len)
/* Called within RCU critical section. */
MemTxResult address_space_read_continue(AddressSpace *as, hwaddr addr,
MemTxAttrs attrs, uint8_t *buf,
int len, hwaddr addr1, hwaddr l,
MemoryRegion *mr)
{
return address_space_rw(as, addr, attrs, buf, len, false);
uint8_t *ptr;
uint64_t val;
MemTxResult result = MEMTX_OK;
bool release_lock = false;
for (;;) {
if (!memory_access_is_direct(mr, false)) {
/* I/O case */
release_lock |= prepare_mmio_access(mr);
l = memory_access_size(mr, l, addr1);
switch (l) {
case 8:
/* 64 bit read access */
result |= memory_region_dispatch_read(mr, addr1, &val, 8,
attrs);
stq_p(buf, val);
break;
case 4:
/* 32 bit read access */
result |= memory_region_dispatch_read(mr, addr1, &val, 4,
attrs);
stl_p(buf, val);
break;
case 2:
/* 16 bit read access */
result |= memory_region_dispatch_read(mr, addr1, &val, 2,
attrs);
stw_p(buf, val);
break;
case 1:
/* 8 bit read access */
result |= memory_region_dispatch_read(mr, addr1, &val, 1,
attrs);
stb_p(buf, val);
break;
default:
abort();
}
} else {
/* RAM case */
ptr = qemu_get_ram_ptr(mr->ram_addr + addr1);
memcpy(buf, ptr, l);
}
if (release_lock) {
qemu_mutex_unlock_iothread();
release_lock = false;
}
len -= l;
buf += l;
addr += l;
if (!len) {
break;
}
l = len;
mr = address_space_translate(as, addr, &addr1, &l, false);
}
return result;
}
MemTxResult address_space_read_full(AddressSpace *as, hwaddr addr,
MemTxAttrs attrs, uint8_t *buf, int len)
{
hwaddr l;
hwaddr addr1;
MemoryRegion *mr;
MemTxResult result = MEMTX_OK;
if (len > 0) {
rcu_read_lock();
l = len;
mr = address_space_translate(as, addr, &addr1, &l, false);
result = address_space_read_continue(as, addr, attrs, buf, len,
addr1, l, mr);
rcu_read_unlock();
}
return result;
}
MemTxResult address_space_rw(AddressSpace *as, hwaddr addr, MemTxAttrs attrs,
uint8_t *buf, int len, bool is_write)
{
if (is_write) {
return address_space_write(as, addr, attrs, (uint8_t *)buf, len);
} else {
return address_space_read(as, addr, attrs, (uint8_t *)buf, len);
}
}
void cpu_physical_memory_rw(hwaddr addr, uint8_t *buf,
int len, int is_write)
@@ -2825,6 +2851,7 @@ void *address_space_map(AddressSpace *as,
hwaddr l, xlat, base;
MemoryRegion *mr, *this_mr;
ram_addr_t raddr;
void *ptr;
if (len == 0) {
return NULL;
@@ -2876,9 +2903,11 @@ void *address_space_map(AddressSpace *as,
}
memory_region_ref(mr);
rcu_read_unlock();
*plen = done;
return qemu_ram_ptr_length(raddr + base, plen);
ptr = qemu_ram_ptr_length(raddr + base, plen);
rcu_read_unlock();
return ptr;
}
/* Unmaps a memory region previously mapped by address_space_map().

View File

@@ -1,5 +1,5 @@
/*
* Virtio 9p backend
* 9p backend
*
* Copyright IBM, Corp. 2010
*
@@ -22,40 +22,9 @@
#include <errno.h>
#include "qemu/compiler.h"
#include "virtio-9p-marshal.h"
#include "9p-iov-marshal.h"
#include "qemu/bswap.h"
void v9fs_string_free(V9fsString *str)
{
g_free(str->data);
str->data = NULL;
str->size = 0;
}
void v9fs_string_null(V9fsString *str)
{
v9fs_string_free(str);
}
void GCC_FMT_ATTR(2, 3)
v9fs_string_sprintf(V9fsString *str, const char *fmt, ...)
{
va_list ap;
v9fs_string_free(str);
va_start(ap, fmt);
str->size = g_vasprintf(&str->data, fmt, ap);
va_end(ap);
}
void v9fs_string_copy(V9fsString *lhs, V9fsString *rhs)
{
v9fs_string_free(lhs);
v9fs_string_sprintf(lhs, "%s", rhs->data);
}
static ssize_t v9fs_packunpack(void *addr, struct iovec *sg, int sg_count,
size_t offset, size_t size, int pack)
{
@@ -107,15 +76,13 @@ ssize_t v9fs_pack(struct iovec *in_sg, int in_num, size_t offset,
return v9fs_packunpack((void *)src, in_sg, in_num, offset, size, 1);
}
ssize_t v9fs_unmarshal(struct iovec *out_sg, int out_num, size_t offset,
int bswap, const char *fmt, ...)
ssize_t v9fs_iov_vunmarshal(struct iovec *out_sg, int out_num, size_t offset,
int bswap, const char *fmt, va_list ap)
{
int i;
va_list ap;
ssize_t copied = 0;
size_t old_offset = offset;
va_start(ap, fmt);
for (i = 0; fmt[i]; i++) {
switch (fmt[i]) {
case 'b': {
@@ -158,8 +125,8 @@ ssize_t v9fs_unmarshal(struct iovec *out_sg, int out_num, size_t offset,
}
case 's': {
V9fsString *str = va_arg(ap, V9fsString *);
copied = v9fs_unmarshal(out_sg, out_num, offset, bswap,
"w", &str->size);
copied = v9fs_iov_unmarshal(out_sg, out_num, offset, bswap,
"w", &str->size);
if (copied > 0) {
offset += copied;
str->data = g_malloc(str->size + 1);
@@ -175,56 +142,70 @@ ssize_t v9fs_unmarshal(struct iovec *out_sg, int out_num, size_t offset,
}
case 'Q': {
V9fsQID *qidp = va_arg(ap, V9fsQID *);
copied = v9fs_unmarshal(out_sg, out_num, offset, bswap, "bdq",
&qidp->type, &qidp->version, &qidp->path);
copied = v9fs_iov_unmarshal(out_sg, out_num, offset, bswap,
"bdq", &qidp->type, &qidp->version,
&qidp->path);
break;
}
case 'S': {
V9fsStat *statp = va_arg(ap, V9fsStat *);
copied = v9fs_unmarshal(out_sg, out_num, offset, bswap,
"wwdQdddqsssssddd",
&statp->size, &statp->type, &statp->dev,
&statp->qid, &statp->mode, &statp->atime,
&statp->mtime, &statp->length,
&statp->name, &statp->uid, &statp->gid,
&statp->muid, &statp->extension,
&statp->n_uid, &statp->n_gid,
&statp->n_muid);
copied = v9fs_iov_unmarshal(out_sg, out_num, offset, bswap,
"wwdQdddqsssssddd",
&statp->size, &statp->type,
&statp->dev, &statp->qid,
&statp->mode, &statp->atime,
&statp->mtime, &statp->length,
&statp->name, &statp->uid,
&statp->gid, &statp->muid,
&statp->extension,
&statp->n_uid, &statp->n_gid,
&statp->n_muid);
break;
}
case 'I': {
V9fsIattr *iattr = va_arg(ap, V9fsIattr *);
copied = v9fs_unmarshal(out_sg, out_num, offset, bswap,
"ddddqqqqq",
&iattr->valid, &iattr->mode,
&iattr->uid, &iattr->gid, &iattr->size,
&iattr->atime_sec, &iattr->atime_nsec,
&iattr->mtime_sec, &iattr->mtime_nsec);
copied = v9fs_iov_unmarshal(out_sg, out_num, offset, bswap,
"ddddqqqqq",
&iattr->valid, &iattr->mode,
&iattr->uid, &iattr->gid,
&iattr->size, &iattr->atime_sec,
&iattr->atime_nsec,
&iattr->mtime_sec,
&iattr->mtime_nsec);
break;
}
default:
break;
}
if (copied < 0) {
va_end(ap);
return copied;
}
offset += copied;
}
va_end(ap);
return offset - old_offset;
}
ssize_t v9fs_marshal(struct iovec *in_sg, int in_num, size_t offset,
int bswap, const char *fmt, ...)
ssize_t v9fs_iov_unmarshal(struct iovec *out_sg, int out_num, size_t offset,
int bswap, const char *fmt, ...)
{
ssize_t ret;
va_list ap;
va_start(ap, fmt);
ret = v9fs_iov_vunmarshal(out_sg, out_num, offset, bswap, fmt, ap);
va_end(ap);
return ret;
}
ssize_t v9fs_iov_vmarshal(struct iovec *in_sg, int in_num, size_t offset,
int bswap, const char *fmt, va_list ap)
{
int i;
va_list ap;
ssize_t copied = 0;
size_t old_offset = offset;
va_start(ap, fmt);
for (i = 0; fmt[i]; i++) {
switch (fmt[i]) {
case 'b': {
@@ -264,8 +245,8 @@ ssize_t v9fs_marshal(struct iovec *in_sg, int in_num, size_t offset,
}
case 's': {
V9fsString *str = va_arg(ap, V9fsString *);
copied = v9fs_marshal(in_sg, in_num, offset, bswap,
"w", str->size);
copied = v9fs_iov_marshal(in_sg, in_num, offset, bswap,
"w", str->size);
if (copied > 0) {
offset += copied;
copied = v9fs_pack(in_sg, in_num, offset, str->data, str->size);
@@ -274,49 +255,65 @@ ssize_t v9fs_marshal(struct iovec *in_sg, int in_num, size_t offset,
}
case 'Q': {
V9fsQID *qidp = va_arg(ap, V9fsQID *);
copied = v9fs_marshal(in_sg, in_num, offset, bswap, "bdq",
qidp->type, qidp->version, qidp->path);
copied = v9fs_iov_marshal(in_sg, in_num, offset, bswap, "bdq",
qidp->type, qidp->version,
qidp->path);
break;
}
case 'S': {
V9fsStat *statp = va_arg(ap, V9fsStat *);
copied = v9fs_marshal(in_sg, in_num, offset, bswap,
"wwdQdddqsssssddd",
statp->size, statp->type, statp->dev,
&statp->qid, statp->mode, statp->atime,
statp->mtime, statp->length, &statp->name,
&statp->uid, &statp->gid, &statp->muid,
&statp->extension, statp->n_uid,
statp->n_gid, statp->n_muid);
copied = v9fs_iov_marshal(in_sg, in_num, offset, bswap,
"wwdQdddqsssssddd",
statp->size, statp->type, statp->dev,
&statp->qid, statp->mode, statp->atime,
statp->mtime, statp->length,
&statp->name,
&statp->uid, &statp->gid, &statp->muid,
&statp->extension, statp->n_uid,
statp->n_gid, statp->n_muid);
break;
}
case 'A': {
V9fsStatDotl *statp = va_arg(ap, V9fsStatDotl *);
copied = v9fs_marshal(in_sg, in_num, offset, bswap,
"qQdddqqqqqqqqqqqqqqq",
statp->st_result_mask,
&statp->qid, statp->st_mode,
statp->st_uid, statp->st_gid,
statp->st_nlink, statp->st_rdev,
statp->st_size, statp->st_blksize,
statp->st_blocks, statp->st_atime_sec,
statp->st_atime_nsec, statp->st_mtime_sec,
statp->st_mtime_nsec, statp->st_ctime_sec,
statp->st_ctime_nsec, statp->st_btime_sec,
statp->st_btime_nsec, statp->st_gen,
statp->st_data_version);
copied = v9fs_iov_marshal(in_sg, in_num, offset, bswap,
"qQdddqqqqqqqqqqqqqqq",
statp->st_result_mask,
&statp->qid, statp->st_mode,
statp->st_uid, statp->st_gid,
statp->st_nlink, statp->st_rdev,
statp->st_size, statp->st_blksize,
statp->st_blocks, statp->st_atime_sec,
statp->st_atime_nsec,
statp->st_mtime_sec,
statp->st_mtime_nsec,
statp->st_ctime_sec,
statp->st_ctime_nsec,
statp->st_btime_sec,
statp->st_btime_nsec, statp->st_gen,
statp->st_data_version);
break;
}
default:
break;
}
if (copied < 0) {
va_end(ap);
return copied;
}
offset += copied;
}
va_end(ap);
return offset - old_offset;
}
ssize_t v9fs_iov_marshal(struct iovec *in_sg, int in_num, size_t offset,
int bswap, const char *fmt, ...)
{
ssize_t ret;
va_list ap;
va_start(ap, fmt);
ret = v9fs_iov_vmarshal(in_sg, in_num, offset, bswap, fmt, ap);
va_end(ap);
return ret;
}

18
fsdev/9p-iov-marshal.h Normal file
View File

@@ -0,0 +1,18 @@
#ifndef _QEMU_9P_IOV_MARSHAL_H
#define _QEMU_9P_IOV_MARSHAL_H
#include "9p-marshal.h"
ssize_t v9fs_pack(struct iovec *in_sg, int in_num, size_t offset,
const void *src, size_t size);
ssize_t v9fs_iov_unmarshal(struct iovec *out_sg, int out_num, size_t offset,
int bswap, const char *fmt, ...);
ssize_t v9fs_iov_marshal(struct iovec *in_sg, int in_num, size_t offset,
int bswap, const char *fmt, ...);
ssize_t v9fs_iov_vunmarshal(struct iovec *out_sg, int out_num, size_t offset,
int bswap, const char *fmt, va_list ap);
ssize_t v9fs_iov_vmarshal(struct iovec *in_sg, int in_num, size_t offset,
int bswap, const char *fmt, va_list ap);
#endif

56
fsdev/9p-marshal.c Normal file
View File

@@ -0,0 +1,56 @@
/*
* 9p backend
*
* Copyright IBM, Corp. 2010
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#include <glib.h>
#include <glib/gprintf.h>
#include <sys/types.h>
#include <dirent.h>
#include <sys/time.h>
#include <utime.h>
#include <sys/uio.h>
#include <string.h>
#include <stdint.h>
#include <errno.h>
#include "qemu/compiler.h"
#include "9p-marshal.h"
void v9fs_string_free(V9fsString *str)
{
g_free(str->data);
str->data = NULL;
str->size = 0;
}
void v9fs_string_null(V9fsString *str)
{
v9fs_string_free(str);
}
void GCC_FMT_ATTR(2, 3)
v9fs_string_sprintf(V9fsString *str, const char *fmt, ...)
{
va_list ap;
v9fs_string_free(str);
va_start(ap, fmt);
str->size = g_vasprintf(&str->data, fmt, ap);
va_end(ap);
}
void v9fs_string_copy(V9fsString *lhs, V9fsString *rhs)
{
v9fs_string_free(lhs);
v9fs_string_sprintf(lhs, "%s", rhs->data);
}

View File

@@ -1,5 +1,5 @@
#ifndef _QEMU_VIRTIO_9P_MARSHAL_H
#define _QEMU_VIRTIO_9P_MARSHAL_H
#ifndef _QEMU_9P_MARSHAL_H
#define _QEMU_9P_MARSHAL_H
typedef struct V9fsString
{
@@ -30,7 +30,7 @@ typedef struct V9fsStat
V9fsString muid;
/* 9p2000.u */
V9fsString extension;
int32_t n_uid;
int32_t n_uid;
int32_t n_gid;
int32_t n_muid;
} V9fsStat;
@@ -81,10 +81,4 @@ extern void v9fs_string_null(V9fsString *str);
extern void v9fs_string_sprintf(V9fsString *str, const char *fmt, ...);
extern void v9fs_string_copy(V9fsString *lhs, V9fsString *rhs);
ssize_t v9fs_pack(struct iovec *in_sg, int in_num, size_t offset,
const void *src, size_t size);
ssize_t v9fs_unmarshal(struct iovec *out_sg, int out_num, size_t offset,
int bswap, const char *fmt, ...);
ssize_t v9fs_marshal(struct iovec *in_sg, int in_num, size_t offset,
int bswap, const char *fmt, ...);
#endif

View File

@@ -1,7 +1,7 @@
ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS)$(CONFIG_PCI),yyy)
# Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
# only pull in the actual virtio-9p device if we also enabled virtio.
common-obj-y = qemu-fsdev.o virtio-9p-marshal.o
common-obj-y = qemu-fsdev.o 9p-marshal.o 9p-iov-marshal.o
else
common-obj-y = qemu-fsdev-dummy.o
endif

View File

@@ -23,9 +23,9 @@
#include "qemu-common.h"
#include "qemu/sockets.h"
#include "qemu/xattr.h"
#include "virtio-9p-marshal.h"
#include "hw/9pfs/virtio-9p-proxy.h"
#include "fsdev/virtio-9p-marshal.h"
#include "9p-iov-marshal.h"
#include "hw/9pfs/9p-proxy.h"
#include "fsdev/9p-iov-marshal.h"
#define PROGNAME "virtfs-proxy-helper"

View File

@@ -1732,6 +1732,7 @@ int gdbserver_start(const char *device)
char gdbstub_device_name[128];
CharDriverState *chr = NULL;
CharDriverState *mon_chr;
ChardevCommon common = { 0 };
if (!device)
return -1;
@@ -1768,7 +1769,7 @@ int gdbserver_start(const char *device)
qemu_add_vm_change_state_handler(gdb_vm_state_change, NULL);
/* Initialize a monitor terminal for gdb */
mon_chr = qemu_chr_alloc();
mon_chr = qemu_chr_alloc(&common, &error_abort);
mon_chr->chr_write = gdb_monitor_write;
monitor_init(mon_chr, 0);
} else {

105
hmp.c
View File

@@ -41,8 +41,7 @@ static void hmp_handle_error(Monitor *mon, Error **errp)
{
assert(errp);
if (*errp) {
monitor_printf(mon, "%s\n", error_get_pretty(*errp));
error_free(*errp);
error_report_err(*errp);
}
}
@@ -311,17 +310,25 @@ void hmp_info_cpus(Monitor *mon, const QDict *qdict)
monitor_printf(mon, "%c CPU #%" PRId64 ":", active, cpu->value->CPU);
if (cpu->value->has_pc) {
monitor_printf(mon, " pc=0x%016" PRIx64, cpu->value->pc);
}
if (cpu->value->has_nip) {
monitor_printf(mon, " nip=0x%016" PRIx64, cpu->value->nip);
}
if (cpu->value->has_npc) {
monitor_printf(mon, " npc=0x%016" PRIx64, cpu->value->npc);
}
if (cpu->value->has_PC) {
monitor_printf(mon, " PC=0x%016" PRIx64, cpu->value->PC);
switch (cpu->value->arch) {
case CPU_INFO_ARCH_X86:
monitor_printf(mon, " pc=0x%016" PRIx64, cpu->value->u.x86->pc);
break;
case CPU_INFO_ARCH_PPC:
monitor_printf(mon, " nip=0x%016" PRIx64, cpu->value->u.ppc->nip);
break;
case CPU_INFO_ARCH_SPARC:
monitor_printf(mon, " pc=0x%016" PRIx64, cpu->value->u.sparc->pc);
monitor_printf(mon, " npc=0x%016" PRIx64, cpu->value->u.sparc->npc);
break;
case CPU_INFO_ARCH_MIPS:
monitor_printf(mon, " PC=0x%016" PRIx64, cpu->value->u.mips->PC);
break;
case CPU_INFO_ARCH_TRICORE:
monitor_printf(mon, " PC=0x%016" PRIx64, cpu->value->u.tricore->PC);
break;
default:
break;
}
if (cpu->value->halted) {
@@ -548,8 +555,7 @@ void hmp_info_vnc(Monitor *mon, const QDict *qdict)
info = qmp_query_vnc(&err);
if (err) {
monitor_printf(mon, "%s\n", error_get_pretty(err));
error_free(err);
error_report_err(err);
return;
}
@@ -671,8 +677,7 @@ void hmp_info_balloon(Monitor *mon, const QDict *qdict)
info = qmp_query_balloon(&err);
if (err) {
monitor_printf(mon, "%s\n", error_get_pretty(err));
error_free(err);
error_report_err(err);
return;
}
@@ -855,7 +860,7 @@ void hmp_info_tpm(Monitor *mon, const QDict *qdict)
tpo->has_cancel_path ? ",cancel-path=" : "",
tpo->has_cancel_path ? tpo->cancel_path : "");
break;
case TPM_TYPE_OPTIONS_KIND_MAX:
case TPM_TYPE_OPTIONS_KIND__MAX:
break;
}
monitor_printf(mon, "\n");
@@ -940,8 +945,7 @@ void hmp_ringbuf_read(Monitor *mon, const QDict *qdict)
data = qmp_ringbuf_read(chardev, size, false, 0, &err);
if (err) {
monitor_printf(mon, "%s\n", error_get_pretty(err));
error_free(err);
error_report_err(err);
return;
}
@@ -1034,8 +1038,7 @@ void hmp_balloon(Monitor *mon, const QDict *qdict)
qmp_balloon(value, &err);
if (err) {
monitor_printf(mon, "balloon: %s\n", error_get_pretty(err));
error_free(err);
error_report_err(err);
}
}
@@ -1183,8 +1186,7 @@ void hmp_migrate_set_cache_size(Monitor *mon, const QDict *qdict)
qmp_migrate_set_cache_size(value, &err);
if (err) {
monitor_printf(mon, "%s\n", error_get_pretty(err));
error_free(err);
error_report_err(err);
return;
}
}
@@ -1203,7 +1205,7 @@ void hmp_migrate_set_capability(Monitor *mon, const QDict *qdict)
MigrationCapabilityStatusList *caps = g_malloc0(sizeof(*caps));
int i;
for (i = 0; i < MIGRATION_CAPABILITY_MAX; i++) {
for (i = 0; i < MIGRATION_CAPABILITY__MAX; i++) {
if (strcmp(cap, MigrationCapability_lookup[i]) == 0) {
caps->value = g_malloc0(sizeof(*caps->value));
caps->value->capability = i;
@@ -1214,16 +1216,14 @@ void hmp_migrate_set_capability(Monitor *mon, const QDict *qdict)
}
}
if (i == MIGRATION_CAPABILITY_MAX) {
if (i == MIGRATION_CAPABILITY__MAX) {
error_setg(&err, QERR_INVALID_PARAMETER, cap);
}
qapi_free_MigrationCapabilityStatusList(caps);
if (err) {
monitor_printf(mon, "migrate_set_capability: %s\n",
error_get_pretty(err));
error_free(err);
error_report_err(err);
}
}
@@ -1239,7 +1239,7 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
bool has_x_cpu_throttle_increment = false;
int i;
for (i = 0; i < MIGRATION_PARAMETER_MAX; i++) {
for (i = 0; i < MIGRATION_PARAMETER__MAX; i++) {
if (strcmp(param, MigrationParameter_lookup[i]) == 0) {
switch (i) {
case MIGRATION_PARAMETER_COMPRESS_LEVEL:
@@ -1268,14 +1268,12 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
}
}
if (i == MIGRATION_PARAMETER_MAX) {
if (i == MIGRATION_PARAMETER__MAX) {
error_setg(&err, QERR_INVALID_PARAMETER, param);
}
if (err) {
monitor_printf(mon, "migrate_set_parameter: %s\n",
error_get_pretty(err));
error_free(err);
error_report_err(err);
}
}
@@ -1368,7 +1366,7 @@ void hmp_change(Monitor *mon, const QDict *qdict)
if (read_only) {
read_only_mode =
qapi_enum_parse(BlockdevChangeReadOnlyMode_lookup,
read_only, BLOCKDEV_CHANGE_READ_ONLY_MODE_MAX,
read_only, BLOCKDEV_CHANGE_READ_ONLY_MODE__MAX,
BLOCKDEV_CHANGE_READ_ONLY_MODE_RETAIN, &err);
if (err) {
hmp_handle_error(mon, &err);
@@ -1536,8 +1534,7 @@ void hmp_migrate(Monitor *mon, const QDict *qdict)
qmp_migrate(uri, !!blk, blk, !!inc, inc, false, false, &err);
if (err) {
monitor_printf(mon, "migrate: %s\n", error_get_pretty(err));
error_free(err);
error_report_err(err);
return;
}
@@ -1771,7 +1768,7 @@ void hmp_sendkey(Monitor *mon, const QDict *qdict)
keylist->value->u.number = value;
} else {
int idx = index_from_key(keyname_buf);
if (idx == Q_KEY_CODE_MAX) {
if (idx == Q_KEY_CODE__MAX) {
goto err_out;
}
keylist->value->type = KEY_VALUE_KIND_QCODE;
@@ -2081,11 +2078,11 @@ void hmp_rocker(Monitor *mon, const QDict *qdict)
{
const char *name = qdict_get_str(qdict, "name");
RockerSwitch *rocker;
Error *errp = NULL;
Error *err = NULL;
rocker = qmp_query_rocker(name, &errp);
if (errp != NULL) {
hmp_handle_error(mon, &errp);
rocker = qmp_query_rocker(name, &err);
if (err != NULL) {
hmp_handle_error(mon, &err);
return;
}
@@ -2100,11 +2097,11 @@ void hmp_rocker_ports(Monitor *mon, const QDict *qdict)
{
RockerPortList *list, *port;
const char *name = qdict_get_str(qdict, "name");
Error *errp = NULL;
Error *err = NULL;
list = qmp_query_rocker_ports(name, &errp);
if (errp != NULL) {
hmp_handle_error(mon, &errp);
list = qmp_query_rocker_ports(name, &err);
if (err != NULL) {
hmp_handle_error(mon, &err);
return;
}
@@ -2129,11 +2126,11 @@ void hmp_rocker_of_dpa_flows(Monitor *mon, const QDict *qdict)
RockerOfDpaFlowList *list, *info;
const char *name = qdict_get_str(qdict, "name");
uint32_t tbl_id = qdict_get_try_int(qdict, "tbl_id", -1);
Error *errp = NULL;
Error *err = NULL;
list = qmp_query_rocker_of_dpa_flows(name, tbl_id != -1, tbl_id, &errp);
if (errp != NULL) {
hmp_handle_error(mon, &errp);
list = qmp_query_rocker_of_dpa_flows(name, tbl_id != -1, tbl_id, &err);
if (err != NULL) {
hmp_handle_error(mon, &err);
return;
}
@@ -2279,12 +2276,12 @@ void hmp_rocker_of_dpa_groups(Monitor *mon, const QDict *qdict)
RockerOfDpaGroupList *list, *g;
const char *name = qdict_get_str(qdict, "name");
uint8_t type = qdict_get_try_int(qdict, "type", 9);
Error *errp = NULL;
Error *err = NULL;
bool set = false;
list = qmp_query_rocker_of_dpa_groups(name, type != 9, type, &errp);
if (errp != NULL) {
hmp_handle_error(mon, &errp);
list = qmp_query_rocker_of_dpa_groups(name, type != 9, type, &err);
if (err != NULL) {
hmp_handle_error(mon, &err);
return;
}

View File

@@ -1,5 +1,5 @@
/*
* Virtio 9p handle callback
* 9p handle callback
*
* Copyright IBM, Corp. 2011
*
@@ -11,9 +11,8 @@
*
*/
#include "hw/virtio/virtio.h"
#include "virtio-9p.h"
#include "virtio-9p-xattr.h"
#include "9p.h"
#include "9p-xattr.h"
#include <arpa/inet.h>
#include <pwd.h>
#include <grp.h>

View File

@@ -1,5 +1,5 @@
/*
* Virtio 9p Posix callback
* 9p Posix callback
*
* Copyright IBM, Corp. 2010
*
@@ -11,9 +11,8 @@
*
*/
#include "hw/virtio/virtio.h"
#include "virtio-9p.h"
#include "virtio-9p-xattr.h"
#include "9p.h"
#include "9p-xattr.h"
#include "fsdev/qemu-fsdev.h" /* local_ops */
#include <arpa/inet.h>
#include <pwd.h>

View File

@@ -1,5 +1,5 @@
/*
* Virtio 9p system.posix* xattr callback
* 9p system.posix* xattr callback
*
* Copyright IBM, Corp. 2010
*
@@ -13,10 +13,9 @@
#include <sys/types.h>
#include "qemu/xattr.h"
#include "hw/virtio/virtio.h"
#include "virtio-9p.h"
#include "9p.h"
#include "fsdev/file-op-9p.h"
#include "virtio-9p-xattr.h"
#include "9p-xattr.h"
#define MAP_ACL_ACCESS "user.virtfs.system.posix_acl_access"
#define MAP_ACL_DEFAULT "user.virtfs.system.posix_acl_default"

View File

@@ -1,5 +1,5 @@
/*
* Virtio 9p Proxy callback
* 9p Proxy callback
*
* Copyright IBM, Corp. 2011
*
@@ -11,11 +11,10 @@
*/
#include <sys/socket.h>
#include <sys/un.h>
#include "hw/virtio/virtio.h"
#include "virtio-9p.h"
#include "9p.h"
#include "qemu/error-report.h"
#include "fsdev/qemu-fsdev.h"
#include "virtio-9p-proxy.h"
#include "9p-proxy.h"
typedef struct V9fsProxy {
int sockfd;

View File

@@ -1,5 +1,5 @@
/*
* Virtio 9p Proxy callback
* 9p Proxy callback
*
* Copyright IBM, Corp. 2011
*
@@ -9,8 +9,8 @@
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*/
#ifndef _QEMU_VIRTIO_9P_PROXY_H
#define _QEMU_VIRTIO_9P_PROXY_H
#ifndef _QEMU_9P_PROXY_H
#define _QEMU_9P_PROXY_H
#define PROXY_MAX_IO_SZ (64 * 1024)
#define V9FS_FD_VALID INT_MAX
@@ -20,9 +20,9 @@
* marsha/unmarshal doesn't do little endian conversion.
*/
#define proxy_unmarshal(in_sg, offset, fmt, args...) \
v9fs_unmarshal(in_sg, 1, offset, 0, fmt, ##args)
v9fs_iov_unmarshal(in_sg, 1, offset, 0, fmt, ##args)
#define proxy_marshal(out_sg, offset, fmt, args...) \
v9fs_marshal(out_sg, 1, offset, 0, fmt, ##args)
v9fs_iov_marshal(out_sg, 1, offset, 0, fmt, ##args)
union MsgControl {
struct cmsghdr cmsg;

View File

@@ -13,10 +13,10 @@
*/
#include "hw/virtio/virtio.h"
#include "virtio-9p.h"
#include "virtio-9p-xattr.h"
#include "9p.h"
#include "9p-xattr.h"
#include "fsdev/qemu-fsdev.h"
#include "virtio-9p-synth.h"
#include "9p-synth.h"
#include "qemu/rcu.h"
#include "qemu/rcu_queue.h"
#include <sys/stat.h>

View File

@@ -1,5 +1,5 @@
/*
* Virtio 9p
* 9p
*
* Copyright IBM, Corp. 2011
*
@@ -10,8 +10,8 @@
* the COPYING file in the top-level directory.
*
*/
#ifndef HW_9PFS_VIRTIO9P_SYNTH_H
#define HW_9PFS_VIRTIO9P_SYNTH_H 1
#ifndef HW_9PFS_SYNTH_H
#define HW_9PFS_SYNTH_H 1
#include <unistd.h>
#include <sys/types.h>

View File

@@ -1,5 +1,5 @@
/*
* Virtio 9p user. xattr callback
* 9p user. xattr callback
*
* Copyright IBM, Corp. 2010
*
@@ -12,10 +12,9 @@
*/
#include <sys/types.h>
#include "hw/virtio/virtio.h"
#include "virtio-9p.h"
#include "9p.h"
#include "fsdev/file-op-9p.h"
#include "virtio-9p-xattr.h"
#include "9p-xattr.h"
static ssize_t mp_user_getxattr(FsContext *ctx, const char *path,

View File

@@ -1,5 +1,5 @@
/*
* Virtio 9p xattr callback
* 9p xattr callback
*
* Copyright IBM, Corp. 2010
*
@@ -11,10 +11,9 @@
*
*/
#include "hw/virtio/virtio.h"
#include "virtio-9p.h"
#include "9p.h"
#include "fsdev/file-op-9p.h"
#include "virtio-9p-xattr.h"
#include "9p-xattr.h"
static XattrOperations *get_xattr_operations(XattrOperations **h,

View File

@@ -1,5 +1,5 @@
/*
* Virtio 9p
* 9p
*
* Copyright IBM, Corp. 2010
*
@@ -10,8 +10,8 @@
* the COPYING file in the top-level directory.
*
*/
#ifndef _QEMU_VIRTIO_9P_XATTR_H
#define _QEMU_VIRTIO_9P_XATTR_H
#ifndef _QEMU_9P_XATTR_H
#define _QEMU_9P_XATTR_H
#include "qemu/xattr.h"

View File

@@ -18,8 +18,8 @@
#include "qemu/sockets.h"
#include "virtio-9p.h"
#include "fsdev/qemu-fsdev.h"
#include "virtio-9p-xattr.h"
#include "virtio-9p-coth.h"
#include "9p-xattr.h"
#include "coth.h"
#include "trace.h"
#include "migration/migration.h"
@@ -39,6 +39,35 @@ enum {
Oappend = 0x80,
};
ssize_t pdu_marshal(V9fsPDU *pdu, size_t offset, const char *fmt, ...)
{
ssize_t ret;
va_list ap;
va_start(ap, fmt);
ret = virtio_pdu_vmarshal(pdu, offset, fmt, ap);
va_end(ap);
return ret;
}
ssize_t pdu_unmarshal(V9fsPDU *pdu, size_t offset, const char *fmt, ...)
{
ssize_t ret;
va_list ap;
va_start(ap, fmt);
ret = virtio_pdu_vunmarshal(pdu, offset, fmt, ap);
va_end(ap);
return ret;
}
static void pdu_push_and_notify(V9fsPDU *pdu)
{
virtio_9p_push_and_notify(pdu);
}
static int omode_to_uflags(int8_t mode)
{
int ret = 0;
@@ -563,7 +592,7 @@ static int fid_to_qid(V9fsPDU *pdu, V9fsFidState *fidp, V9fsQID *qidp)
return 0;
}
static V9fsPDU *alloc_pdu(V9fsState *s)
V9fsPDU *pdu_alloc(V9fsState *s)
{
V9fsPDU *pdu = NULL;
@@ -575,9 +604,10 @@ static V9fsPDU *alloc_pdu(V9fsState *s)
return pdu;
}
static void free_pdu(V9fsState *s, V9fsPDU *pdu)
void pdu_free(V9fsPDU *pdu)
{
if (pdu) {
V9fsState *s = pdu->s;
/*
* Cancelled pdu are added back to the freelist
* by flush request .
@@ -594,9 +624,10 @@ static void free_pdu(V9fsState *s, V9fsPDU *pdu)
* because we always expect to have enough space to encode
* error details
*/
static void complete_pdu(V9fsState *s, V9fsPDU *pdu, ssize_t len)
static void pdu_complete(V9fsPDU *pdu, ssize_t len)
{
int8_t id = pdu->id + 1; /* Response */
V9fsState *s = pdu->s;
if (len < 0) {
int err = -len;
@@ -627,16 +658,12 @@ static void complete_pdu(V9fsState *s, V9fsPDU *pdu, ssize_t len)
pdu->size = len;
pdu->id = id;
/* push onto queue and notify */
virtqueue_push(s->vq, &pdu->elem, len);
/* FIXME: we should batch these completions */
virtio_notify(VIRTIO_DEVICE(s), s->vq);
pdu_push_and_notify(pdu);
/* Now wakeup anybody waiting in flush for this request */
qemu_co_queue_next(&pdu->complete);
free_pdu(s, pdu);
pdu_free(pdu);
}
static mode_t v9mode_to_mode(uint32_t mode, V9fsString *extension)
@@ -931,7 +958,7 @@ static void v9fs_version(void *opaque)
offset += err;
trace_v9fs_version_return(pdu->tag, pdu->id, s->msize, version.data);
out:
complete_pdu(s, pdu, offset);
pdu_complete(pdu, offset);
v9fs_string_free(&version);
}
@@ -995,7 +1022,7 @@ static void v9fs_attach(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&uname);
v9fs_string_free(&aname);
}
@@ -1009,7 +1036,6 @@ static void v9fs_stat(void *opaque)
struct stat stbuf;
V9fsFidState *fidp;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
err = pdu_unmarshal(pdu, offset, "d", &fid);
if (err < 0) {
@@ -1042,7 +1068,7 @@ static void v9fs_stat(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
}
static void v9fs_getattr(void *opaque)
@@ -1105,7 +1131,7 @@ static void v9fs_getattr(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, retval);
pdu_complete(pdu, retval);
}
/* Attribute flags */
@@ -1129,7 +1155,6 @@ static void v9fs_setattr(void *opaque)
size_t offset = 7;
V9fsIattr v9iattr;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
err = pdu_unmarshal(pdu, offset, "dI", &fid, &v9iattr);
if (err < 0) {
@@ -1203,7 +1228,7 @@ static void v9fs_setattr(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
}
static int v9fs_walk_marshal(V9fsPDU *pdu, uint16_t nwnames, V9fsQID *qids)
@@ -1245,7 +1270,7 @@ static void v9fs_walk(void *opaque)
err = pdu_unmarshal(pdu, offset, "ddw", &fid, &newfid, &nwnames);
if (err < 0) {
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
return ;
}
offset += err;
@@ -1313,7 +1338,7 @@ out:
v9fs_path_free(&dpath);
v9fs_path_free(&path);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
if (nwnames && nwnames <= P9_MAXWELEM) {
for (name_idx = 0; name_idx < nwnames; name_idx++) {
v9fs_string_free(&wnames[name_idx]);
@@ -1430,7 +1455,7 @@ static void v9fs_open(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
}
static void v9fs_lcreate(void *opaque)
@@ -1487,7 +1512,7 @@ static void v9fs_lcreate(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(pdu->s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&name);
}
@@ -1499,7 +1524,6 @@ static void v9fs_fsync(void *opaque)
size_t offset = 7;
V9fsFidState *fidp;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
err = pdu_unmarshal(pdu, offset, "dd", &fid, &datasync);
if (err < 0) {
@@ -1518,7 +1542,7 @@ static void v9fs_fsync(void *opaque)
}
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
}
static void v9fs_clunk(void *opaque)
@@ -1551,7 +1575,7 @@ static void v9fs_clunk(void *opaque)
err = offset;
}
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
}
static int v9fs_xattr_read(V9fsState *s, V9fsPDU *pdu, V9fsFidState *fidp,
@@ -1561,6 +1585,8 @@ static int v9fs_xattr_read(V9fsState *s, V9fsPDU *pdu, V9fsFidState *fidp,
size_t offset = 7;
int read_count;
int64_t xattr_len;
V9fsVirtioState *v = container_of(s, V9fsVirtioState, state);
VirtQueueElement *elem = &v->elems[pdu->idx];
xattr_len = fidp->fs.xattr.len;
read_count = xattr_len - off;
@@ -1577,7 +1603,8 @@ static int v9fs_xattr_read(V9fsState *s, V9fsPDU *pdu, V9fsFidState *fidp,
return err;
}
offset += err;
err = v9fs_pack(pdu->elem.in_sg, pdu->elem.in_num, offset,
err = v9fs_pack(elem->in_sg, elem->in_num, offset,
((char *)fidp->fs.xattr.value) + off,
read_count);
if (err < 0) {
@@ -1667,13 +1694,7 @@ static void v9fs_init_qiov_from_pdu(QEMUIOVector *qiov, V9fsPDU *pdu,
struct iovec *iov;
unsigned int niov;
if (is_write) {
iov = pdu->elem.out_sg;
niov = pdu->elem.out_num;
} else {
iov = pdu->elem.in_sg;
niov = pdu->elem.in_num;
}
virtio_init_iov_from_pdu(pdu, &iov, &niov, is_write);
qemu_iovec_init_external(&elem, iov, niov);
qemu_iovec_init(qiov, niov);
@@ -1761,7 +1782,7 @@ static void v9fs_read(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
}
static size_t v9fs_readdir_data_size(V9fsString *name)
@@ -1848,7 +1869,6 @@ static void v9fs_readdir(void *opaque)
int32_t count;
uint32_t max_count;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
retval = pdu_unmarshal(pdu, offset, "dqd", &fid,
&initial_offset, &max_count);
@@ -1885,7 +1905,7 @@ static void v9fs_readdir(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, retval);
pdu_complete(pdu, retval);
}
static int v9fs_xattr_write(V9fsState *s, V9fsPDU *pdu, V9fsFidState *fidp,
@@ -1952,7 +1972,7 @@ static void v9fs_write(void *opaque)
err = pdu_unmarshal(pdu, offset, "dqd", &fid, &off, &count);
if (err < 0) {
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
return;
}
offset += err;
@@ -2015,7 +2035,7 @@ out:
put_fid(pdu, fidp);
out_nofid:
qemu_iovec_destroy(&qiov_full);
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
}
static void v9fs_create(void *opaque)
@@ -2182,7 +2202,7 @@ static void v9fs_create(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(pdu->s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&name);
v9fs_string_free(&extension);
v9fs_path_free(&path);
@@ -2229,7 +2249,7 @@ static void v9fs_symlink(void *opaque)
out:
put_fid(pdu, dfidp);
out_nofid:
complete_pdu(pdu->s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&name);
v9fs_string_free(&symname);
}
@@ -2245,7 +2265,7 @@ static void v9fs_flush(void *opaque)
err = pdu_unmarshal(pdu, offset, "w", &tag);
if (err < 0) {
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
return;
}
trace_v9fs_flush(pdu->tag, pdu->id, tag);
@@ -2262,15 +2282,14 @@ static void v9fs_flush(void *opaque)
*/
qemu_co_queue_wait(&cancel_pdu->complete);
cancel_pdu->cancelled = 0;
free_pdu(pdu->s, cancel_pdu);
pdu_free(cancel_pdu);
}
complete_pdu(s, pdu, 7);
pdu_complete(pdu, 7);
}
static void v9fs_link(void *opaque)
{
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
int32_t dfid, oldfid;
V9fsFidState *dfidp, *oldfidp;
V9fsString name;
@@ -2303,7 +2322,7 @@ out:
put_fid(pdu, dfidp);
out_nofid:
v9fs_string_free(&name);
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
}
/* Only works with path name based fid */
@@ -2348,7 +2367,7 @@ out_err:
clunk_fid(pdu->s, fidp->fid);
put_fid(pdu, fidp);
out_nofid:
complete_pdu(pdu->s, pdu, err);
pdu_complete(pdu, err);
}
static void v9fs_unlinkat(void *opaque)
@@ -2392,7 +2411,7 @@ out_err:
put_fid(pdu, dfidp);
v9fs_path_free(&path);
out_nofid:
complete_pdu(pdu->s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&name);
}
@@ -2492,7 +2511,7 @@ static void v9fs_rename(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&name);
}
@@ -2593,7 +2612,7 @@ static void v9fs_renameat(void *opaque)
}
out_err:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&old_name);
v9fs_string_free(&new_name);
}
@@ -2608,7 +2627,6 @@ static void v9fs_wstat(void *opaque)
struct stat stbuf;
V9fsFidState *fidp;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
v9fs_stat_init(&v9stat);
err = pdu_unmarshal(pdu, offset, "dwS", &fid, &unused, &v9stat);
@@ -2690,7 +2708,7 @@ out:
put_fid(pdu, fidp);
out_nofid:
v9fs_stat_free(&v9stat);
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
}
static int v9fs_fill_statfs(V9fsState *s, V9fsPDU *pdu, struct statfs *stbuf)
@@ -2769,7 +2787,7 @@ static void v9fs_statfs(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, retval);
pdu_complete(pdu, retval);
}
static void v9fs_mknod(void *opaque)
@@ -2786,7 +2804,6 @@ static void v9fs_mknod(void *opaque)
struct stat stbuf;
V9fsFidState *fidp;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
v9fs_string_init(&name);
err = pdu_unmarshal(pdu, offset, "dsdddd", &fid, &name, &mode,
@@ -2817,7 +2834,7 @@ static void v9fs_mknod(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&name);
}
@@ -2838,7 +2855,6 @@ static void v9fs_lock(void *opaque)
V9fsFidState *fidp;
int32_t fid, err = 0;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
status = P9_LOCK_ERROR;
v9fs_string_init(&flock.client_id);
@@ -2875,7 +2891,7 @@ out_nofid:
err += offset;
}
trace_v9fs_lock_return(pdu->tag, pdu->id, status);
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&flock.client_id);
}
@@ -2891,7 +2907,6 @@ static void v9fs_getlock(void *opaque)
V9fsGetlock glock;
int32_t fid, err = 0;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
v9fs_string_init(&glock.client_id);
err = pdu_unmarshal(pdu, offset, "dbqqds", &fid, &glock.type,
@@ -2925,7 +2940,7 @@ static void v9fs_getlock(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&glock.client_id);
}
@@ -2969,7 +2984,7 @@ static void v9fs_mkdir(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(pdu->s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&name);
}
@@ -3075,7 +3090,7 @@ out:
put_fid(pdu, xattr_fidp);
}
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&name);
}
@@ -3090,7 +3105,6 @@ static void v9fs_xattrcreate(void *opaque)
V9fsFidState *file_fidp;
V9fsFidState *xattr_fidp;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
v9fs_string_init(&name);
err = pdu_unmarshal(pdu, offset, "dsqd", &fid, &name, &size, &flags);
@@ -3116,7 +3130,7 @@ static void v9fs_xattrcreate(void *opaque)
err = offset;
put_fid(pdu, file_fidp);
out_nofid:
complete_pdu(s, pdu, err);
pdu_complete(pdu, err);
v9fs_string_free(&name);
}
@@ -3156,7 +3170,7 @@ static void v9fs_readlink(void *opaque)
out:
put_fid(pdu, fidp);
out_nofid:
complete_pdu(pdu->s, pdu, err);
pdu_complete(pdu, err);
}
static CoroutineEntry *pdu_co_handlers[] = {
@@ -3199,13 +3213,13 @@ static CoroutineEntry *pdu_co_handlers[] = {
static void v9fs_op_not_supp(void *opaque)
{
V9fsPDU *pdu = opaque;
complete_pdu(pdu->s, pdu, -EOPNOTSUPP);
pdu_complete(pdu, -EOPNOTSUPP);
}
static void v9fs_fs_ro(void *opaque)
{
V9fsPDU *pdu = opaque;
complete_pdu(pdu->s, pdu, -EROFS);
pdu_complete(pdu, -EROFS);
}
static inline bool is_read_only_op(V9fsPDU *pdu)
@@ -3235,10 +3249,11 @@ static inline bool is_read_only_op(V9fsPDU *pdu)
}
}
static void submit_pdu(V9fsState *s, V9fsPDU *pdu)
void pdu_submit(V9fsPDU *pdu)
{
Coroutine *co;
CoroutineEntry *handler;
V9fsState *s = pdu->s;
if (pdu->id >= ARRAY_SIZE(pdu_co_handlers) ||
(pdu_co_handlers[pdu->id] == NULL)) {
@@ -3254,41 +3269,104 @@ static void submit_pdu(V9fsState *s, V9fsPDU *pdu)
qemu_coroutine_enter(co, pdu);
}
void handle_9p_output(VirtIODevice *vdev, VirtQueue *vq)
/* Returns 0 on success, 1 on failure. */
int v9fs_device_realize_common(V9fsState *s, Error **errp)
{
V9fsState *s = (V9fsState *)vdev;
V9fsPDU *pdu;
ssize_t len;
V9fsVirtioState *v = container_of(s, V9fsVirtioState, state);
int i, len;
struct stat stat;
FsDriverEntry *fse;
V9fsPath path;
int rc = 1;
while ((pdu = alloc_pdu(s)) &&
(len = virtqueue_pop(vq, &pdu->elem)) != 0) {
struct {
uint32_t size_le;
uint8_t id;
uint16_t tag_le;
} QEMU_PACKED out;
int len;
pdu->s = s;
BUG_ON(pdu->elem.out_num == 0 || pdu->elem.in_num == 0);
QEMU_BUILD_BUG_ON(sizeof out != 7);
len = iov_to_buf(pdu->elem.out_sg, pdu->elem.out_num, 0,
&out, sizeof out);
BUG_ON(len != sizeof out);
pdu->size = le32_to_cpu(out.size_le);
pdu->id = out.id;
pdu->tag = le16_to_cpu(out.tag_le);
qemu_co_queue_init(&pdu->complete);
submit_pdu(s, pdu);
/* initialize pdu allocator */
QLIST_INIT(&s->free_list);
QLIST_INIT(&s->active_list);
for (i = 0; i < (MAX_REQ - 1); i++) {
QLIST_INSERT_HEAD(&s->free_list, &v->pdus[i], next);
v->pdus[i].s = s;
v->pdus[i].idx = i;
}
free_pdu(s, pdu);
v9fs_path_init(&path);
fse = get_fsdev_fsentry(s->fsconf.fsdev_id);
if (!fse) {
/* We don't have a fsdev identified by fsdev_id */
error_setg(errp, "9pfs device couldn't find fsdev with the "
"id = %s",
s->fsconf.fsdev_id ? s->fsconf.fsdev_id : "NULL");
goto out;
}
if (!s->fsconf.tag) {
/* we haven't specified a mount_tag */
error_setg(errp, "fsdev with id %s needs mount_tag arguments",
s->fsconf.fsdev_id);
goto out;
}
s->ctx.export_flags = fse->export_flags;
s->ctx.fs_root = g_strdup(fse->path);
s->ctx.exops.get_st_gen = NULL;
len = strlen(s->fsconf.tag);
if (len > MAX_TAG_LEN - 1) {
error_setg(errp, "mount tag '%s' (%d bytes) is longer than "
"maximum (%d bytes)", s->fsconf.tag, len, MAX_TAG_LEN - 1);
goto out;
}
s->tag = g_strdup(s->fsconf.tag);
s->ctx.uid = -1;
s->ops = fse->ops;
s->fid_list = NULL;
qemu_co_rwlock_init(&s->rename_lock);
if (s->ops->init(&s->ctx) < 0) {
error_setg(errp, "9pfs Failed to initialize fs-driver with id:%s"
" and export path:%s", s->fsconf.fsdev_id, s->ctx.fs_root);
goto out;
}
/*
* Check details of export path, We need to use fs driver
* call back to do that. Since we are in the init path, we don't
* use co-routines here.
*/
if (s->ops->name_to_path(&s->ctx, NULL, "/", &path) < 0) {
error_setg(errp,
"error in converting name to path %s", strerror(errno));
goto out;
}
if (s->ops->lstat(&s->ctx, &path, &stat)) {
error_setg(errp, "share path %s does not exist", fse->path);
goto out;
} else if (!S_ISDIR(stat.st_mode)) {
error_setg(errp, "share path %s is not a directory", fse->path);
goto out;
}
v9fs_path_free(&path);
rc = 0;
out:
if (rc) {
g_free(s->ctx.fs_root);
g_free(s->tag);
v9fs_path_free(&path);
}
return rc;
}
static void __attribute__((__constructor__)) virtio_9p_set_fd_limit(void)
void v9fs_device_unrealize_common(V9fsState *s, Error **errp)
{
g_free(s->ctx.fs_root);
g_free(s->tag);
}
static void __attribute__((__constructor__)) v9fs_set_fd_limit(void)
{
struct rlimit rlim;
if (getrlimit(RLIMIT_NOFILE, &rlim) < 0) {

326
hw/9pfs/9p.h Normal file
View File

@@ -0,0 +1,326 @@
#ifndef _QEMU_9P_H
#define _QEMU_9P_H
#include <sys/types.h>
#include <dirent.h>
#include <sys/time.h>
#include <utime.h>
#include <sys/resource.h>
#include <glib.h>
#include "standard-headers/linux/virtio_9p.h"
#include "hw/virtio/virtio.h"
#include "fsdev/file-op-9p.h"
#include "fsdev/9p-iov-marshal.h"
#include "qemu/thread.h"
#include "qemu/coroutine.h"
enum {
P9_TLERROR = 6,
P9_RLERROR,
P9_TSTATFS = 8,
P9_RSTATFS,
P9_TLOPEN = 12,
P9_RLOPEN,
P9_TLCREATE = 14,
P9_RLCREATE,
P9_TSYMLINK = 16,
P9_RSYMLINK,
P9_TMKNOD = 18,
P9_RMKNOD,
P9_TRENAME = 20,
P9_RRENAME,
P9_TREADLINK = 22,
P9_RREADLINK,
P9_TGETATTR = 24,
P9_RGETATTR,
P9_TSETATTR = 26,
P9_RSETATTR,
P9_TXATTRWALK = 30,
P9_RXATTRWALK,
P9_TXATTRCREATE = 32,
P9_RXATTRCREATE,
P9_TREADDIR = 40,
P9_RREADDIR,
P9_TFSYNC = 50,
P9_RFSYNC,
P9_TLOCK = 52,
P9_RLOCK,
P9_TGETLOCK = 54,
P9_RGETLOCK,
P9_TLINK = 70,
P9_RLINK,
P9_TMKDIR = 72,
P9_RMKDIR,
P9_TRENAMEAT = 74,
P9_RRENAMEAT,
P9_TUNLINKAT = 76,
P9_RUNLINKAT,
P9_TVERSION = 100,
P9_RVERSION,
P9_TAUTH = 102,
P9_RAUTH,
P9_TATTACH = 104,
P9_RATTACH,
P9_TERROR = 106,
P9_RERROR,
P9_TFLUSH = 108,
P9_RFLUSH,
P9_TWALK = 110,
P9_RWALK,
P9_TOPEN = 112,
P9_ROPEN,
P9_TCREATE = 114,
P9_RCREATE,
P9_TREAD = 116,
P9_RREAD,
P9_TWRITE = 118,
P9_RWRITE,
P9_TCLUNK = 120,
P9_RCLUNK,
P9_TREMOVE = 122,
P9_RREMOVE,
P9_TSTAT = 124,
P9_RSTAT,
P9_TWSTAT = 126,
P9_RWSTAT,
};
/* qid.types */
enum {
P9_QTDIR = 0x80,
P9_QTAPPEND = 0x40,
P9_QTEXCL = 0x20,
P9_QTMOUNT = 0x10,
P9_QTAUTH = 0x08,
P9_QTTMP = 0x04,
P9_QTSYMLINK = 0x02,
P9_QTLINK = 0x01,
P9_QTFILE = 0x00,
};
enum p9_proto_version {
V9FS_PROTO_2000U = 0x01,
V9FS_PROTO_2000L = 0x02,
};
#define P9_NOTAG (u16)(~0)
#define P9_NOFID (u32)(~0)
#define P9_MAXWELEM 16
#define FID_REFERENCED 0x1
#define FID_NON_RECLAIMABLE 0x2
static inline char *rpath(FsContext *ctx, const char *path)
{
return g_strdup_printf("%s/%s", ctx->fs_root, path);
}
/*
* ample room for Twrite/Rread header
* size[4] Tread/Twrite tag[2] fid[4] offset[8] count[4]
*/
#define P9_IOHDRSZ 24
typedef struct V9fsPDU V9fsPDU;
struct V9fsState;
struct V9fsPDU
{
uint32_t size;
uint16_t tag;
uint8_t id;
uint8_t cancelled;
CoQueue complete;
struct V9fsState *s;
QLIST_ENTRY(V9fsPDU) next;
uint32_t idx;
};
/* FIXME
* 1) change user needs to set groups and stuff
*/
#define MAX_REQ 128
#define MAX_TAG_LEN 32
#define BUG_ON(cond) assert(!(cond))
typedef struct V9fsFidState V9fsFidState;
enum {
P9_FID_NONE = 0,
P9_FID_FILE,
P9_FID_DIR,
P9_FID_XATTR,
};
typedef struct V9fsConf
{
/* tag name for the device */
char *tag;
char *fsdev_id;
} V9fsConf;
typedef struct V9fsXattr
{
int64_t copied_len;
int64_t len;
void *value;
V9fsString name;
int flags;
} V9fsXattr;
/*
* Filled by fs driver on open and other
* calls.
*/
union V9fsFidOpenState {
int fd;
DIR *dir;
V9fsXattr xattr;
/*
* private pointer for fs drivers, that
* have its own internal representation of
* open files.
*/
void *private;
};
struct V9fsFidState
{
int fid_type;
int32_t fid;
V9fsPath path;
V9fsFidOpenState fs;
V9fsFidOpenState fs_reclaim;
int flags;
int open_flags;
uid_t uid;
int ref;
int clunked;
V9fsFidState *next;
V9fsFidState *rclm_lst;
};
typedef struct V9fsState
{
QLIST_HEAD(, V9fsPDU) free_list;
QLIST_HEAD(, V9fsPDU) active_list;
V9fsFidState *fid_list;
FileOperations *ops;
FsContext ctx;
char *tag;
enum p9_proto_version proto_version;
int32_t msize;
/*
* lock ensuring atomic path update
* on rename.
*/
CoRwlock rename_lock;
int32_t root_fid;
Error *migration_blocker;
V9fsConf fsconf;
} V9fsState;
/* 9p2000.L open flags */
#define P9_DOTL_RDONLY 00000000
#define P9_DOTL_WRONLY 00000001
#define P9_DOTL_RDWR 00000002
#define P9_DOTL_NOACCESS 00000003
#define P9_DOTL_CREATE 00000100
#define P9_DOTL_EXCL 00000200
#define P9_DOTL_NOCTTY 00000400
#define P9_DOTL_TRUNC 00001000
#define P9_DOTL_APPEND 00002000
#define P9_DOTL_NONBLOCK 00004000
#define P9_DOTL_DSYNC 00010000
#define P9_DOTL_FASYNC 00020000
#define P9_DOTL_DIRECT 00040000
#define P9_DOTL_LARGEFILE 00100000
#define P9_DOTL_DIRECTORY 00200000
#define P9_DOTL_NOFOLLOW 00400000
#define P9_DOTL_NOATIME 01000000
#define P9_DOTL_CLOEXEC 02000000
#define P9_DOTL_SYNC 04000000
/* 9p2000.L at flags */
#define P9_DOTL_AT_REMOVEDIR 0x200
/* 9P2000.L lock type */
#define P9_LOCK_TYPE_RDLCK 0
#define P9_LOCK_TYPE_WRLCK 1
#define P9_LOCK_TYPE_UNLCK 2
#define P9_LOCK_SUCCESS 0
#define P9_LOCK_BLOCKED 1
#define P9_LOCK_ERROR 2
#define P9_LOCK_GRACE 3
#define P9_LOCK_FLAGS_BLOCK 1
#define P9_LOCK_FLAGS_RECLAIM 2
typedef struct V9fsFlock
{
uint8_t type;
uint32_t flags;
uint64_t start; /* absolute offset */
uint64_t length;
uint32_t proc_id;
V9fsString client_id;
} V9fsFlock;
typedef struct V9fsGetlock
{
uint8_t type;
uint64_t start; /* absolute offset */
uint64_t length;
uint32_t proc_id;
V9fsString client_id;
} V9fsGetlock;
extern int open_fd_hw;
extern int total_open_fd;
static inline void v9fs_path_write_lock(V9fsState *s)
{
if (s->ctx.export_flags & V9FS_PATHNAME_FSCONTEXT) {
qemu_co_rwlock_wrlock(&s->rename_lock);
}
}
static inline void v9fs_path_read_lock(V9fsState *s)
{
if (s->ctx.export_flags & V9FS_PATHNAME_FSCONTEXT) {
qemu_co_rwlock_rdlock(&s->rename_lock);
}
}
static inline void v9fs_path_unlock(V9fsState *s)
{
if (s->ctx.export_flags & V9FS_PATHNAME_FSCONTEXT) {
qemu_co_rwlock_unlock(&s->rename_lock);
}
}
static inline uint8_t v9fs_request_cancelled(V9fsPDU *pdu)
{
return pdu->cancelled;
}
extern void v9fs_reclaim_fd(V9fsPDU *pdu);
extern void v9fs_path_init(V9fsPath *path);
extern void v9fs_path_free(V9fsPath *path);
extern void v9fs_path_copy(V9fsPath *lhs, V9fsPath *rhs);
extern int v9fs_name_to_path(V9fsState *s, V9fsPath *dirpath,
const char *name, V9fsPath *path);
extern int v9fs_device_realize_common(V9fsState *s, Error **errp);
extern void v9fs_device_unrealize_common(V9fsState *s, Error **errp);
ssize_t pdu_marshal(V9fsPDU *pdu, size_t offset, const char *fmt, ...);
ssize_t pdu_unmarshal(V9fsPDU *pdu, size_t offset, const char *fmt, ...);
V9fsPDU *pdu_alloc(V9fsState *s);
void pdu_free(V9fsPDU *pdu);
void pdu_submit(V9fsPDU *pdu);
#endif

View File

@@ -1,9 +1,9 @@
common-obj-y = virtio-9p.o
common-obj-y += virtio-9p-local.o virtio-9p-xattr.o
common-obj-y += virtio-9p-xattr-user.o virtio-9p-posix-acl.o
common-obj-y += virtio-9p-coth.o cofs.o codir.o cofile.o
common-obj-y += coxattr.o virtio-9p-synth.o
common-obj-$(CONFIG_OPEN_BY_HANDLE) += virtio-9p-handle.o
common-obj-y += virtio-9p-proxy.o
common-obj-y = 9p.o
common-obj-y += 9p-local.o 9p-xattr.o
common-obj-y += 9p-xattr-user.o 9p-posix-acl.o
common-obj-y += coth.o cofs.o codir.o cofile.o
common-obj-y += coxattr.o 9p-synth.o
common-obj-$(CONFIG_OPEN_BY_HANDLE) += 9p-handle.o
common-obj-y += 9p-proxy.o
obj-y += virtio-9p-device.o

View File

@@ -15,7 +15,7 @@
#include "fsdev/qemu-fsdev.h"
#include "qemu/thread.h"
#include "qemu/coroutine.h"
#include "virtio-9p-coth.h"
#include "coth.h"
int v9fs_co_readdir_r(V9fsPDU *pdu, V9fsFidState *fidp, struct dirent *dent,
struct dirent **result)

Some files were not shown because too many files have changed in this diff Show More