Compare commits

..

109 Commits

Author SHA1 Message Date
Michael Roth
e22f675bdd Update version for 2.12.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-08-02 15:51:06 -05:00
Fam Zheng
aae299a68d file-posix: Handle EINTR in preallocation=full write
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit a1c81f4f16)
 Conflicts:
	block/file-posix.c
* avoid dep on 93f4e2ff by adding check to raw_regular_truncate instead
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-31 11:54:59 -05:00
KONRAD Frederic
b102aea574 qcow: fix a reference leak
Since 42a3e1ab36 qemu asserts when using the
vvfat driver:

git clone git://qemu.org/qemu.git
cd qemu
./configure --target-list=ppc-softmmu --enable-debug
make -j8
mkdir foo
touch foo/hello
./ppc-softmmu/qemu-system-ppc -M prep --nographic --monitor null             \
                              -hda fat:rw:./foo

"Ctrl-C"

qemu-system-ppc: block.c:3368: bdrv_close_all: Assertion                     \
   `((&all_bdrv_states)->tqh_first == ((void *)0))' failed.

This is because we reference bs twice in qcow_co_create(..) one time in
bdrv_open_blockdev_ref(..) and in blk_insert_bs(..) but we unref it only once
in blk_unref which leads to the reference leak.

Note that I didn't tested much QCOW after this change as I don't use it much.

Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 41b6513436)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-31 11:46:31 -05:00
Christian Borntraeger
336cd382dc s390x/sclp: fix maxram calculation
We clamp down ram_size to match the sclp increment size. We do
not do the same for maxram_size, which means for large guests
with some sizes (e.g. -m 50000) maxram_size differs from ram_size.
This can break other code (e.g. CMMA migration) which uses maxram_size
to calculate the number of pages and then throws some errors.

Fixes: 82fab5c5b9 ("s390x/sclp: remove memory hotplug support")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: qemu-stable@nongnu.org
CC: David Hildenbrand <david@redhat.com>
Message-Id: <1532959766-53343-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 408e5ace51)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-31 11:27:16 -05:00
Marc-André Lureau
bf1cb819e9 qga: process_event() simplification and leak fix
json_parser_parse_err() may return something else than a QDict, in
which case we loose the object. Let's keep track of the original
object to avoid leaks.

When an error occurs, "qdict" contains the response, but we still
check the "execute" key there. Untangle a bit this code, by having a
clear error path.

CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit ae7da1e5f6)
* drop context dep on d43b16945a
* drop functional dep on cb3e7f08ae
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-24 17:47:40 -05:00
Markus Armbruster
08c4a51c65 qmp: De-duplicate error response building
All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object.  Replace it by qmp_error_response() that
captures the duplicated code, including error_free().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>
(cherry picked from commit cee32796ca)
 Conflicts:
	include/qapi/qmp/dispatch.h
	qapi/qmp-dispatch.c
	qga/main.c
* drop context dep on cb3e7f08ae
* prereq for ae7da1e5f6
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-24 15:45:47 -05:00
Markus Armbruster
441784598e qobject: New qdict_from_jsonf_nofail()
Many uses of qobject_from_jsonf() convert JSON objects.  Create new
convenience function qdict_from_jsonf_nofail() that includes the
conversion to QDict.  The next few commits will put it to use.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-22-armbru@redhat.com>
(cherry picked from commit a193352ff9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-24 15:05:01 -05:00
Michael Roth
2f36efaeb1 Merge tag 's390x-20180724-212-stable' into stable-2.12-staging
update s390-ccw.img for stable
2018-07-24 14:12:14 -05:00
Marc-André Lureau
90b2d94123 ccid-card-passthru: fix regression in realize()
Since cc847bfd16, CCID card-passthru
fails to intialize, because it changed a debug line to an error,
probably by mistake. Change it back to a DPRINTF debug.

(solves Boxes creating VM with smartcard passthru failing to start)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180515153039.27514-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit e58d64a16a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-24 14:08:46 -05:00
Cornelia Huck
c16427177a pc-bios/s390-ccw.img: update image for stable
Contains the following commits:
- s390-ccw: force diag 308 subcode to unsigned long
- pc-bios/s390-ccw: struct tpi_info must be declared as aligned(4)

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-24 06:08:42 -04:00
Richard Henderson
e8488edcb3 tcg/i386: Mark xmm registers call-clobbered
When host vector registers and operations were introduced, I failed
to mark the registers call clobbered as required by the ABI.

Fixes: 770c2fc7bb
Cc: qemu-stable@nongnu.org
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 672189cd58)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-23 14:24:17 -05:00
Peter Lieven
3afe55ff38 qemu-img: avoid overflow of min_sparse parameter
the min_sparse convert parameter can overflow (e.g. -S 1024G)
in the conversion from int64_t to int resulting in a negative
min_sparse parameter. Avoid this by limiting the valid parameters
to sane values. In fact anything exceeding the convert buffer size
is also pointless. While at it also forbid values that are non
multiple of 512 to avoid undesired behaviour. For instance, values
between 1 and 511 were legal, but resulted in full allocation.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 6360ab278c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-23 14:23:30 -05:00
Yunjian Wang
1b817abcd4 tap: fix memory leak on success to create a tap device
The memory leak on success to create a tap device. And the nfds and
nvhosts may not be the same and need to be processed separately.

Fixes: 07825977 ("tap: fix memory leak on failure to create a multiqueue tap device")
Fixes: 264986e2 ("tap: multiqueue support")
Cc: qemu-stable@nongnu.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 323e7c1177)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-23 14:20:45 -05:00
Emilio G. Cota
0935356e43 target/ppc: set is_jmp on ppc_tr_breakpoint_check
The use of GDB breakpoints was broken by b0c2d52 ("target/ppc: convert
to TranslatorOps", 2018-02-16).

Fix it by setting is_jmp, so that we break from the translation loop
as originally intended.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 2a8ceefca2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 16:13:24 -05:00
Pankaj Gupta
d109f8eb7e virtio-rng: process pending requests on DRIVER_OK
virtio-rng device causes old guest kernels(2.6.32) to hang on latest qemu.
The driver attempts to read from the virtio-rng device too early in it's
initialization. Qemu detects guest is not ready and returns, resulting in
hang.

To fix handle pending requests when guest is running and driver status is
set to 'VIRTIO_CONFIG_S_DRIVER_OK'.

CC: qemu-stable@nongnu.org
Reported-by: Sergio lopez <slopezpa@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 5d9c9ea22a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 16:11:30 -05:00
Eric Blake
2379ac134a iscsi: Avoid potential for get_status overflow
Detected by Coverity: Multiplying two 32-bit int and assigning
the result to a 64-bit number is a risk of overflow.  Prior to
the conversion to byte-based interfaces, the block layer took
care of ensuring that a status request never exceeded 2G in
the driver; but after that conversion, the block layer expects
drivers to deal with any size request (the driver can always
truncate the request size back down, as long as it makes
progress).  So, in the off-chance that someone makes a large
request, we are at the mercy of whether iscsi_get_lba_status_task()
will cap things to at most INT_MAX / iscsilun->block_size when
it populates lbasd->num_blocks; since I could not easily audit
that, it's better to be safe than sorry by just forcing a 64-bit
multiply.

Fixes: 92809c36
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180508212718.1482663-1-eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
(cherry picked from commit 8ee1cef459)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 16:10:48 -05:00
Eric Blake
f8b3b02933 nbd/server: Reject 0-length block status request
The NBD spec says that behavior is unspecified if the client
requests 0 length for block status; but since the structured
reply is documenting as returning a non-zero length, it's
easier to just diagnose this with an EINVAL error than to
figure out what to return.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180621124937.166549-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit d8b20291cb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:51:25 -05:00
Richard Henderson
78747264b9 tcg: Reduce max TB opcode count
Also, assert that we don't overflow any of two different offsets into
the TB. Both unwind and goto_tb both record a uint16_t for later use.

This fixes an arm-softmmu test case utilizing NEON in which there is
a TB generated that runs to 7800 opcodes, and compiles to 96k on an
x86_64 host.  This overflows the 16-bit offset in which we record the
goto_tb reset offset.  Because of that overflow, we install a jump
destination that goes to neverland.  Boom.

With this reduced op count, the same TB compiles to about 48k for
aarch64, ppc64le, and x86_64 hosts, and neither assertion fires.

Cc: qemu-stable@nongnu.org
Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 9f75462065)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:44:56 -05:00
Vladimir Sementsov-Ogievskiy
d8a7ec1deb migration/block-dirty-bitmap: fix dirty_bitmap_load
dirty_bitmap_load_header return code is obtained but not handled. Fix
this.

Bug was introduced in b35ebdf076
"migration: add postcopy migration of dirty bitmaps" with the whole
function.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180530112424.204835-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(cherry picked from commit a36f6ff46f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:43:20 -05:00
Alex Williamson
2cb041a82d vfio/pci: Default display option to "off"
Commit a9994687cb ("vfio/display: core & wireup") added display
support to vfio-pci with the default being "auto", which breaks
existing VMs when the vGPU requires GL support but had no previous
requirement for a GL compatible configuration.  "Off" is the safer
default as we impose no new requirements to VM configurations.

Fixes: a9994687cb ("vfio/display: core & wireup")
Cc: qemu-stable@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
(cherry picked from commit 8151a9c56d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:15:01 -05:00
Olaf Hering
6d3ed3798b replace functions which are only available in glib-2.24
Currently the minimal supported version of glib is 2.22.
Since testing is done with a glib that claims to be 2.22, but in fact
has APIs from newer version of glib, this bug was not caught during
submit of the patch referenced below.

Replace g_realloc_n, which is available only since 2.24, with g_renew.

Fixes commit 418026ca43 ("util: Introduce vfio helpers")

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CC: qemu-stable@nongnu.org
(cherry picked from commit d29eb678bc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:12:05 -05:00
Kevin Wolf
58119514f5 nfs: Remove processed options from QDict
Commit c22a03454 QAPIfied option parsing in the NFS block driver, but
forgot to remove all the options we processed. Therefore, we get an
error in bdrv_open_inherit(), which thinks the remaining options are
invalid. Trying to open an NFS image will result in an error like this:

    Block protocol 'nfs' doesn't support the option 'server.host'

Remove all options from the QDict to make the NFS driver work again.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20180516160816.26259-1-kwolf@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit c82be42cc8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:10:19 -05:00
Marc-André Lureau
008ffc7a2f mux: fix ctrl-a b again
Commit fb5e19d2e1 originally fixed the
regression, but was inadvertently broken again in merge commit
2d6752d38d.

Fixes:
https://bugs.launchpad.net/qemu/+bug/1654137

Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180515152500.19460-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit eeaa671505)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:03:03 -05:00
Philippe Mathieu-Daudé
5e10c00f61 hw/isa/superio: Fix inconsistent use of Chardev->be
4c3119a6e3 and cd9526ab7c introduced an incorrect and inconsistent
use of Chardev->be. Also, this CharBackend member is private and is
not supposed to be accessible.

Fix it by removing the inconsistent check.

Cc: qemu-stable@nongnu.org
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180515152500.19460-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit d4c8fcd91a)
 Conflicts:
	hw/isa/isa-superio.c
* avoid context dep on 9bca0edb28
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:02:03 -05:00
Alex Bennée
ca11f0ab77 target/arm: Fix sqrt_f16 exception raising
We are meant to explicitly pass fpst, not cpu_env.

Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 905edee910)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:52:03 -05:00
Alex Bennée
ffc3a15018 target/arm: Implement FMOV (immediate) for fp16
All the hard work is already done by vfp_expand_imm, we just need to
make sure we pick up the correct size.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180512003217.9105-11-richard.henderson@linaro.org
[rth: Merge unallocated_encoding check with TCGMemOp conversion.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

(cherry picked from commit 6ba28ddb9b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:51:54 -05:00
Alex Bennée
f3816879f9 target/arm: Implement FCSEL for fp16
These were missed out from the rest of the half-precision work.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180512003217.9105-10-richard.henderson@linaro.org
[rth: Fix erroneous check vs type]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

(cherry picked from commit ace97feef3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:51:44 -05:00
Alex Bennée
246dad2f3c target/arm: Implement FCMP for fp16
These where missed out from the rest of the half-precision work.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180512003217.9105-9-richard.henderson@linaro.org
[rth: Diagnose lack of FP16 before fp_access_check]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

(cherry picked from commit 7a1929256e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:51:31 -05:00
Richard Henderson
0819a17250 target/arm: Implement FP data-processing (3 source) for fp16
We missed all of the scalar fp16 fma operations.

Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 95f9864fde)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:51:20 -05:00
Richard Henderson
7133cd4cfe target/arm: Implement FP data-processing (2 source) for fp16
We missed all of the scalar fp16 binary operations.

Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit b8f5171cf0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:51:05 -05:00
Richard Henderson
d1ed4a60ba target/arm: Introduce and use read_fp_hreg
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3d99d93126)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:50:48 -05:00
Richard Henderson
7c38f3703d target/arm: Implement FCVT (scalar, fixed-point) for fp16
Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 2752728016)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:50:35 -05:00
Richard Henderson
baa552e54f target/arm: Implement FCVT (scalar, integer) for fp16
Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 564a063250)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:49:18 -05:00
Richard Henderson
4ec6a17a04 target/arm: Implement FMOV (general) for fp16
Adding the fp16 moves to/from general registers.

Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 68130236e3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:48:36 -05:00
Petr Tesarik
781cde6d94 fpu/softfloat: Fix conversion from uint64 to float128
The significand is passed to normalizeRoundAndPackFloat128() as high
first, low second. The current code passes the integer first, so the
result is incorrectly shifted left by 64 bits.

This bug affects the emulation of s390x instruction CXLGBR (convert
from logical 64-bit binary-integer operand to extended BFP result).

Cc: qemu-stable@nongnu.org
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Message-Id: <20180511071052.1443-1-ptesarik@suse.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 6603d50648)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:47:49 -05:00
Richard Henderson
e5af958dd2 target/arm: Clear SVE high bits for FMOV
Use write_fp_dreg and clear_vec_high to zero the bits
that need zeroing for these cases.

Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 9a9f1f5952)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:47:00 -05:00
Richard Henderson
c708ce7d6e target/arm: Fix float16 to/from int16
The instruction "ucvtf v0.4h, v04h, #2", with input 0x8000u,
overflows the intermediate float16 to infinity before we have a
chance to scale the output.  Use float64 as the intermediate type
so that no input argument (uint32_t in this case) can overflow
or round before scaling.  Given the declared argument, the signed
int32_t function has the same problem.

When converting from float16 to integer, using u/int32_t instead
of u/int16_t means that the bounding is incorrect.

Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 88808a022c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:46:52 -05:00
Richard Henderson
0aaf1cca02 target/arm: Implement vector shifted FCVT for fp16
While we have some of the scalar paths for FCVT for fp16,
we failed to decode the fp16 version of these instructions.

Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit d0ba8e74ac)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:46:40 -05:00
Richard Henderson
994b0cf997 target/arm: Implement vector shifted SCVF/UCVF for fp16
While we have some of the scalar paths for *CVF for fp16,
we failed to decode the fp16 version of these instructions.

Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit a6117fae45)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:46:30 -05:00
Peter Maydell
e653eee8d8 fpu/softfloat: Don't set Invalid for float-to-int(MAXINT)
In float-to-integer conversion, if the floating point input
converts exactly to the largest or smallest integer that
fits in to the result type, this is not an overflow.
In this situation we were producing the correct result value,
but were incorrectly setting the Invalid flag.
For example for Arm A64, "FCVTAS w0, d0" on an input of
0x41dfffffffc00000 should produce 0x7fffffff and set no flags.

Fix the boundary case to take the right half of the if()
statements.

This fixes a regression from 2.11 introduced by the softfloat
refactoring.

Cc: qemu-stable@nongnu.org
Fixes: ab52f973a5
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180510140141.12120-1-peter.maydell@linaro.org
(cherry picked from commit 333583757c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:45:23 -05:00
Peter Maydell
fbaeb1068c target/arm: Fix fp_status_f16 tininess before rounding
In commit d81ce0ef2c we added an extra float_status field
fp_status_fp16 for Arm, but forgot to initialize it correctly
by setting it to float_tininess_before_rounding. This currently
will only cause problems for the new V8_FP16 feature, since the
float-to-float conversion code doesn't use it yet. The effect
would be that we failed to set the Underflow IEEE exception flag
in all the cases where we should.

Add the missing initialization.

Fixes: d81ce0ef2c
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180512004311.9299-16-richard.henderson@linaro.org
(cherry picked from commit bcc531f036)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:43:45 -05:00
John Snow
0779afdc89 blockjob: expose error string via query
When we've reached the concluded state, we need to expose the error
state if applicable. Add the new field.

This should be sufficient for determining if a job completed
successfully or not after concluding; if we want to discriminate
based on how it failed more mechanically, we can always add an
explicit return code enumeration later.

I didn't bother to make it only show up if we are in the concluded
state; I don't think it's necessary.

Cc: qemu-stable@nongnu.org
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit ab9ba61455)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:35:53 -05:00
Michael Clark
4a67f4a953 RISC-V: Minimal QEMU 2.12 fix for sifive_u machine
The 'sifive_u' board has a bug where the ROM is
created as RAM at the wrong address and marked
readonly. The bug renders the board unusable.
This is a minimal fix and allows booting Linux.

5aec3247c1
"RISC-V: Mark ROM read-only after copying in code"
contains a comprehensive fix using the ROM APIs
memory_region_init_rom and rom_add_blob_fixed_as
which could be backported.

Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:32:06 -05:00
Richard Henderson
9363c34825 tcg: Limit the number of ops in a TB
In 6001f7729e we partially attempt to address the branch
displacement overflow caused by 15fa08f845.

However, gcc/testsuite/gcc.target/aarch64/advsimd-intrinsics/vqtbX.c
is a testcase that contains a TB so large as to overflow anyway.
The limit here of 8000 ops produces a maximum output TB size of
24112 bytes on a ppc64le host with that test case.  This is still
much less than the maximum forward branch distance of 32764 bytes.

Cc: qemu-stable@nongnu.org
Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit abebf92597)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
Peter Maydell
51d5decb32 softfloat: Handle default NaN mode after pickNaNMulAdd, not before
It is implementation defined whether a multiply-add of
(0,inf,qnan) or (inf,0,qnan) raises InvalidaOperation or
not, so we let the target-specific pickNaNMulAdd function
handle this. This means that we must do the "return the
default NaN in default NaN mode" check after the call,
not before. Correct the ordering, and restore the comment
from the old propagateFloat64MulAddNaN() that warned about
this corner case.

This fixes a regression from 2.11 for Arm guests where we would
incorrectly fail to set the Invalid flag for these cases.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180504100547.14621-1-peter.maydell@linaro.org
(cherry picked from commit 1839189bbf)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
Peter Maydell
0e4b4b4fd3 tcg/i386: Fix dup_vec in non-AVX2 codepath
The VPUNPCKLD* instructions are all "non-destructive source",
indicated by "NDS" in the encoding string in the x86 ISA manual.
This means that they take two source operands, one of which is
encoded in the VEX.vvvv field. We were incorrectly treating them
as if they were destructive-source and passing 0 as the 'v'
argument of tcg_out_vex_modrm(). This meant we were always
using %xmm0 as one of the source operands, causing incorrect
results if the register allocator happened to want to use
something else. For instance the input AArch64 insn:
 DUP v26.16b, w21
which becomes TCG IR ops:
 dup_vec v128,e8,tmp2,x21
 st_vec v128,e8,tmp2,env,$0xa40
was assembled to:
0x607c568c:  c4 c1 7a 7e 86 e8 00 00  vmovq    0xe8(%r14), %xmm0
0x607c5694:  00
0x607c5695:  c5 f9 60 c8              vpunpcklbw %xmm0, %xmm0, %xmm1
0x607c5699:  c5 f9 61 c9              vpunpcklwd %xmm1, %xmm0, %xmm1
0x607c569d:  c5 f9 70 c9 00           vpshufd  $0, %xmm1, %xmm1
0x607c56a2:  c4 c1 7a 7f 8e 40 0a 00  vmovdqu  %xmm1, 0xa40(%r14)
0x607c56aa:  00

when the vpunpcklwd insn should be "%xmm1, %xmm1, %xmm1".
This resulted in our incorrectly setting the output vector to
q26=0000320000003200:0000320000003200
when given an input of x21 == 0000000002803200
rather than the expected all-zeroes.

Pass the correct source register number to tcg_out_vex_modrm()
for these insns.

Fixes: 770c2fc7bb
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180504153431.5169-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 7eb30ef0ba)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
Eric Blake
6951158023 nbd/client: Relax handling of large NBD_CMD_BLOCK_STATUS reply
The NBD spec is proposing a relaxation of NBD_CMD_BLOCK_STATUS
where a server may have the final extent per context give a
length beyond the original request, if it can easily prove that
subsequent bytes have the same status, on the grounds that a
client can take advantage of this information for fewer block
status requests.  Since qemu 2.12 as a client always sends
NBD_CMD_FLAG_REQ_ONE, and rejects a server that sends extra
length, the upstream NBD spec will probably limit this behavior
to clients that don't request REQ_ONE semantics; but it doesn't
hurt to relax qemu to always be permissive of this server
behavior, even if it continues to use REQ_ONE.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180503222626.1303410-1-eblake@redhat.com>
Reviewed-by:  Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit acfd8f7a5f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
KONRAD Frederic
b129914a8d riscv: requires libfdt
When compiling on a machine without libfdt installed the configure script
should try to get libfdt from the git or should die because otherwise
CONFIG_LIBFDT is not set and the build process end in an error in the link
phase.. eg:

hw/riscv/virt.o: In function `riscv_virt_board_init':
qemu/src/hw/riscv/virt.c:317: undefined reference to `qemu_fdt_setprop_cell'
qemu/src/hw/riscv/virt.c:319: undefined reference to `qemu_fdt_setprop_cell'
qemu/src/hw/riscv/virt.c:345: undefined reference to `qemu_fdt_dumpdtb'
collect2: error: ld returned 1 exit status
make[1]: *** [qemu-system-riscv64] Error 1
make: *** [subdir-riscv64-softmmu] Error 2

Cc: qemu-stable@nongnu.org
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>

Message-Id: <1525360636-18229-4-git-send-email-frederic.konrad@adacore.com>
(cherry picked from commit a666409f0d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
KONRAD Frederic
db6f66eff7 riscv: htif: increase the priority of the htif subregion
The htif device is supposed to be mapped over an other subregion. So increase
its priority to one to avoid any conflict.

Here is the output of info mtree:

Before:
(qemu) info mtree
 address-space: memory
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 0, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

 address-space: I/O
   0000000000000000-000000000000ffff (prio 0, i/o): io

 address-space: cpu-memory-0
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 0, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

After:
 (qemu) info mtree
 address-space: memory
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 1, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

 address-space: I/O
   0000000000000000-000000000000ffff (prio 0, i/o): io

 address-space: cpu-memory-0
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 1, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>

Message-Id: <1525360636-18229-3-git-send-email-frederic.konrad@adacore.com>
(cherry picked from commit 6fad7d1893)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
KONRAD Frederic
26cf05c1a1 riscv: spike: allow base == 0
The sanity check on base doesn't allow htif to be mapped @0. Check if the
symbol exists instead so we can map it where we want.

Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>

Message-Id: <1525360636-18229-2-git-send-email-frederic.konrad@adacore.com>
(cherry picked from commit 17b9751e85)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
Max Reitz
7bc615f88f iotests: Add test for cancelling a mirror job
We already have an extensive mirror test (041) which does cover
cancelling a mirror job, especially after it has emitted the READY
event.  However, it does not check what exact events are emitted after
block-job-cancel is executed.  More importantly, it does not use
throttling to ensure that it covers the case of block-job-cancel before
READY.

It would be possible to add this case to 041, but considering it is
already our largest test file, it makes sense to create a new file for
these cases.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501220509.14152-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit dc885fff97)
 Conflicts:
	tests/qemu-iotests/group
* fix minor conflicts with test groups
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Max Reitz
1eddfab31c block/mirror: Make cancel always cancel pre-READY
Commit b76e4458b1 made the mirror block
job respect block-job-cancel's @force flag: With that flag set, it would
now always really cancel, even post-READY.

Unfortunately, it had a side effect: Without that flag set, it would now
never cancel, not even before READY.  Considering that is an
incompatible change and not noted anywhere in the commit or the
description of block-job-cancel's @force parameter, this seems
unintentional and we should revert to the previous behavior, which is to
immediately cancel the job when block-job-cancel is called before source
and target are in sync (i.e. before the READY event).

Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1572856
Reported-by: Yanan Fu <yfu@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180501220509.14152-2-mreitz@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit eb36639f7b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Laszlo Ersek
3882183fda qapi: fill in CpuInfoFast.arch in query-cpus-fast
* Commit ca230ff33f added the @arch field to @CpuInfoFast, but it failed
  to set the new field in qmp_query_cpus_fast(), when TARGET_S390X was not
  defined. The updated @query-cpus-fast example in "qapi-schema.json"
  showed "arch":"x86" only because qmp_query_cpus_fast() calls g_malloc0()
  to allocate @CpuInfoFast, and the CPU_INFO_ARCH_X86 enum constant is
  generated with value 0.

  All @arch values other than @s390 implied the @CpuInfoOther sub-struct
  for @CpuInfoFast -- at the time of writing the patch --, thus no fields
  other than @arch needed to be set when TARGET_S390X was not defined. Set
  @arch now, by copying the corresponding assignments from
  qmp_query_cpus().

* Commit 25fa194b7b added the @riscv enum constant to @CpuInfoArch (used
  in both @CpuInfo and @CpuInfoFast -- the return types of the @query-cpus
  and @query-cpus-fast commands, respectively), and assigned, in both
  return structures, the @CpuInfoRISCV sub-structure to the new enum
  value.

  However, qmp_query_cpus_fast() would not populate either the @arch field
  or the @CpuInfoRISCV sub-structure, when TARGET_RISCV was defined; only
  qmp_query_cpus() would.

  Assign @CpuInfoOther to the @riscv enum constant in @CpuInfoFast, and
  populate only the @arch field in qmp_query_cpus_fast(). Getting CPU
  state without interrupting KVM is an exceptional thing that only S390X
  does currently. Quoting Cornelia Huck <cohuck@redhat.com>, "s390x is
  exceptional in that it has state in QEMU that is actually interesting
  for upper layers and can be retrieved without performance penalty". See
  also
  <https://www.redhat.com/archives/libvir-list/2018-February/msg00121.html>.

Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Viktor VM Mihajlovski <mihajlov@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Fixes: ca230ff33f
Fixes: 25fa194b7b
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180427192852.15013-2-lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 96054f5639)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Vladimir Sementsov-Ogievskiy
3b52d47418 migration/block-dirty-bitmap: fix memory leak in dirty_bitmap_load_bits
Release buf on error path too.

Bug was introduced in b35ebdf076 "migration: add postcopy
migration of dirty bitmaps" with the whole function.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180427142002.21930-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 16a2227893)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Vladimir Sementsov-Ogievskiy
f155487bef nbd/client: fix nbd_negotiate_simple_meta_context
Initialize received variable. Otherwise, is is possible for server to
answer without any contexts, but we will set context_id to something
random (received_id is not initialized too) and return 1, which is
wrong.

To solve it, just initialize received to false. Initialize received_id
too, just to make all possible checkers happy.

Bug was introduced in 78a33ab587 "nbd: BLOCK_STATUS for
standard get_block_status function: client part" with the whole
function.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180427142002.21930-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 89aa0d8763)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Cédric Le Goater
54eb6cc6d7 cpus: tcg: fix never exiting loop on unplug
Commit 9b0605f983 ("cpus: tcg: unregister thread with RCU, fix
exiting of loop on unplug") changed the exit condition of the loop in
the vCPU thread function but forgot to remove the beginning 'while (1)'
statement. The resulting code :

	while (1) {
	...
	} while (!cpu->unplug || cpu_can_run(cpu));

is a sequence of two distinct two while() loops, the first not exiting
in case of an unplug event.

Remove the first while (1) to fix CPU unplug.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20180425131828.15604-1-clg@kaod.org>
Cc: qemu-stable@nongnu.org
Fixes: 9b0605f983
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
(cherry picked from commit 54961aac19)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Stefan Hajnoczi
9eb3e5a8a8 block/mirror: honor ratelimit again
Commit b76e4458b1 ("block/mirror: change
the semantic of 'force' of block-job-cancel") accidentally removed the
ratelimit in the mirror job.

Reintroduce the ratelimit but keep the block-job-cancel force=true
behavior that was added in commit
b76e4458b1.

Note that block_job_sleep_ns() returns immediately when the job is
cancelled.  Therefore it's safe to unconditionally call
block_job_sleep_ns() - a cancelled job does not sleep.

This commit fixes the non-deterministic qemu-iotests 185 output.  The
test relies on the ratelimit to make the job sleep until the 'quit'
command is processed.  Previously the job could complete before the
'quit' command was received since there was no ratelimit.

Cc: Liang Li <liliang.opensource@gmail.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180424123527.19168-1-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit ddc4115efd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Gerd Hoffmann
05a3e663b1 vnc: fix use-after-free
When vnc_client_read() return value is -1
vs is not valid any more.

Fixes: d49b87f0d1
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420084820.3873-1-kraxel@redhat.com
(cherry picked from commit 1bc3117aba)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Philippe Mathieu-Daudé
073198b8e8 usb/dev-mtp: Fix use of uninitialized values
This fixes:

  hw/usb/dev-mtp.c:971:5: warning: 4th function call argument is an uninitialized value
      trace_usb_mtp_op_get_partial_object(s->dev.addr, o->handle, o->path,
                                           c->argv[1], c->argv[2]);
                                                       ^~~~~~~~~~
and:

  hw/usb/dev-mtp.c:981:12: warning: Assigned value is garbage or undefined
      offset = c->argv[1];
               ^ ~~~~~~~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180604151421.23385-3-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 62713a2e50)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Philippe Mathieu-Daudé
5da7e93f51 usb: correctly handle Zero Length Packets
USB Specification Revision 2.0, §5.5.3:
  The Data stage of a control transfer from an endpoint to the host is complete when the endpoint does one of the following:
  • Has transferred exactly the amount of data specified during the Setup stage
  • Transfers a packet with a payload size less than wMaxPacketSize or transfers a zero-length packet"

hw/usb/redirect.c:802:9: warning: Declared variable-length array (VLA) has zero size
        uint8_t buf[size];
        ^~~~~~~~~~~ ~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180604151421.23385-2-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit bf78fb1c1b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Shannon Zhao
c5dd07b529 arm_gicv3_kvm: kvm_dist_get/put_priority: skip the registers banked by GICR_IPRIORITYR
While for_each_dist_irq_reg loop starts from GIC_INTERNAL, it forgot to
offset the date array and index. This will overlap the GICR registers
value and leave the last GIC_INTERNAL irq's registers out of update.

Fixes: 367b9f527b
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 1dcf367519)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Eric Blake
396d79c36c iotests: Add test 221 to catch qemu-img map regression
Although qemu-img creates aligned files (by rounding up), it
must also gracefully handle files that are not sector-aligned.
Test that the bug fixed in the previous patch does not recur.

It's a bit annoying that we can see the (implicit) hole past
the end of the file on to the next sector boundary, so if we
ever reach the point where we report a byte-accurate size rather
than our current behavior of always rounding up, this test will
probably need a slight modification.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c6a9d2f6f9)
 Conflicts:
	tests/qemu-iotests/group
* drop context dep on tests not present in 2.12
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Eric Blake
26cdf35f69 qemu-img: Fix assert when mapping unaligned raw file
Commit a290f085 exposed a latent bug in qemu-img map introduced
during the conversion of block status to be byte-based.  Earlier in
commit 5e344dd8, the internal interface get_block_status() switched
to take byte-based parameters, but still called a sector-based
block layer function; as such, rounding was added in the lone
caller to obey the contract.  However, commit 237d78f8 changed
get_block_status() to truly be byte-based, at which point rounding
to sector boundaries can result in calling bdrv_block_status() with
'bytes == 0' (a coding error) when the boundary between data and a
hole falls mid-sector (true for the past-EOF implicit hole present
in POSIX files).  Fix things by removing the rounding that is now
no longer necessary.

See also https://bugzilla.redhat.com/1589738

Fixes: 237d78f8
Reported-by: Dan Kenigsberg <danken@redhat.com>
Reported-by: Nir Soffer <nsoffer@redhat.com>
Reported-by: Maor Lipchuk <mlipchuk@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit e0b371ed5e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
linzhecheng
fb7f173c2c vhost-user: delete net client if necessary
As qemu_new_net_client create new ncs but error happens later,
ncs will be left in global net_clients list and we can't use them any
more, so we need to cleanup them.

Cc: qemu-stable@nongnu.org
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit c67daf4a24)
 Conflicts:
	net/vhost-user.c
* drop functional dep on 4d0cf552
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Brijesh Singh
2f2b189235 tap: set vhostfd passed from qemu cli to non-blocking
A guest boot hangs while probing the network interface when
iommu_platform=on is used.

The following qemu cli hangs without this patch:

# $QEMU \
  -netdev tap,fd=3,id=hostnet0,vhost=on,vhostfd=4 3<>/dev/tap67 4<>/dev/host-net \
  -device virtio-net-pci,netdev=hostnet0,id=net0,iommu_platform=on,disable-legacy=on \
  ...

Commit: c471ad0e9b (vhost_net: device IOTLB support) took care of
setting vhostfd to non-blocking when QEMU opens /dev/host-net but if
the fd is passed from qemu cli then we need to ensure that fd is set
to non-blocking.

Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit d542800d1e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Konrad Rzeszutek Wilk
43163837d3 i386: define the AMD 'virt-ssbd' CPUID feature bit (CVE-2018-3639)
AMD Zen expose the Intel equivalant to Speculative Store Bypass Disable
via the 0x80000008_EBX[25] CPUID feature bit.

This needs to be exposed to guest OS to allow them to protect
against CVE-2018-3639.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180521215424.13520-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit 403503b162)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Konrad Rzeszutek Wilk
3129ddb943 i386: Define the Virt SSBD MSR and handling of it (CVE-2018-3639)
"Some AMD processors only support a non-architectural means of enabling
speculative store bypass disable (SSBD).  To allow a simplified view of
this to a guest, an architectural definition has been created through a new
CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f.  With this, a
hypervisor can virtualize the existence of this definition and provide an
architectural method for using SSBD to a guest.

Add the new CPUID feature, the new MSR and update the existing SSBD
support to use this MSR when present." (from x86/speculation: Add virtualized
speculative store bypass disable support in Linux).

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180521215424.13520-4-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit cfeea0c021)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Daniel P. Berrangé
8a302f42a5 i386: define the 'ssbd' CPUID feature bit (CVE-2018-3639)
New microcode introduces the "Speculative Store Bypass Disable"
CPUID feature bit. This needs to be exposed to guest OS to allow
them to protect against CVE-2018-3639.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Message-Id: <20180521215424.13520-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit d19d1f9659)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Alberto Garcia
ef67e67388 throttle: Fix crash on reopen
The throttle block filter can be reopened, and with this it is
possible to change the throttle group that the filter belongs to.

The way the code does that is the following:

  - On throttle_reopen_prepare(): create a new ThrottleGroupMember
    and attach it to the new throttle group.

  - On throttle_reopen_commit(): detach the old ThrottleGroupMember,
    delete it and replace it with the new one.

The problem with this is that by replacing the ThrottleGroupMember the
previous value of io_limits_disabled is lost, causing an assertion
failure in throttle_co_drain_end().

This problem can be reproduced by reopening a throttle node:

   $QEMU -monitor stdio
   -object throttle-group,id=tg0,x-iops-total=1000 \
   -blockdev node-name=hd0,driver=qcow2,file.driver=file,file.filename=hd.qcow2 \
   -blockdev node-name=root,driver=throttle,throttle-group=tg0,file=hd0,read-only=on

   (qemu) block_stream root
   block/throttle.c:214: throttle_co_drain_end: Assertion `tgm->io_limits_disabled' failed.

Since we only want to change the throttle group on reopen there's no
need to create a ThrottleGroupMember and discard the old one. It's
easier if we simply detach it from its current group and attach it to
the new one.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180608151536.7378-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit bc33c047d1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Max Reitz
081eac8b30 iotests: Add case for a corrupted inactive image
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit c50abd175a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Max Reitz
5aa76f3a8c qcow2: Do not mark inactive images corrupt
When signaling a corruption on a read-only image, qcow2 already makes
fatal events non-fatal (i.e., they will not result in the image being
closed, and the image header's corrupt flag will not be set).  This is
necessary because we cannot set the corrupt flag on read-only images,
and it is possible because further corruption of read-only images is
impossible.

Inactive images are effectively read-only, too, so we should do the same
for them.  bdrv_is_writable() can tell us whether an image can actually
be written to, so use its result instead of !bs->read_only.

(Otherwise, the assert(!(bs->open_flags & BDRV_O_INACTIVE)) in
bdrv_co_pwritev() will fail, crashing qemu.)

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit ddf3b47ef4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Max Reitz
bd64fec665 block: Make bdrv_is_writable() public
This is a useful function for the whole block layer, so make it public.
At the same time, users outside of block.c probably do not need to make
use of the reopen functionality, so rename the current function to
bdrv_is_writable_after_reopen() create a new bdrv_is_writable() function
that just passes NULL to it for the reopen queue.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit cc02214097)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Shannon Zhao
5459c0c458 arm_gicv3_kvm: kvm_dist_get/put: skip the registers banked by GICR
While we skip the GIC_INTERNAL irqs, we don't change the register offset
accordingly. This will overlap the GICR registers value and leave the
last GIC_INTERNAL irq's registers out of update.

Fix this by skipping the registers banked by GICR.

Also for migration compatibility if the migration source (old version
qemu) doesn't send gicd_no_migration_shift_bug = 1 to destination, then
we shift the data of PPI to get the right data for SPI.

Fixes: 367b9f527b
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Message-id: 1527816987-16108-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 910e204841)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
John Snow
5c9266fa97 ahci: fix PxCI register race
Fixes: https://bugs.launchpad.net/qemu/+bug/1769189

AHCI presently signals completion prior to the PxCI register being
cleared to indicate completion. If a guest driver attempts to issue
a new command in its IRQ handler, it might be surprised to learn there
is still a command pending.

In the case of Windows 10's boot driver, it will actually poll the IRQ
register hoping to find out when the command is done running -- which
will never happen, as there isn't a command running.

Fix this: clear PxCI in ahci_cmd_done and not in the asynchronous BH.
Because it now runs synchronously, we don't need to check if the command
is actually done by spying on the ATA registers. We know it's done.

CC: qemu-stable <qemu-stable@nongnu.org>
Reported-by: François Guerraz <kubrick@fgv6.net>
Tested-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180531004323.4611-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 5694c7eacc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
John Thomson
df00a166c4 Fix libusb-1.0.22 deprecated libusb_set_debug with libusb_set_option
libusb-1.0.22 marked libusb_set_debug deprecated
it is replaced with
libusb_set_option(libusb_context, LIBUSB_OPTION_LOG_LEVEL, libusb_log_level);

details here: 539f22e2fd

Warning here:

  CC      hw/usb/host-libusb.o
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c: In function 'usb_host_init':
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c:250:5: error: 'libusb_set_debug' is deprecated: Use libusb_set_option instead [-Werror=deprecated-declarations]
     libusb_set_debug(ctx, loglevel);
     ^~~~~~~~~~~~~~~~
In file included from /builds/xen/src/qemu-xen/hw/usb/host-libusb.c:40:0:
/usr/include/libusb-1.0/libusb.h:1300:18: note: declared here
 void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
                  ^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [/builds/xen/src/qemu-xen/rules.mak:66: hw/usb/host-libusb.o] Error 1
make: Leaving directory '/builds/xen/src/xen/tools/qemu-xen-build'

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Message-id: 20180405132046.4968-1-git@johnthomson.fastmail.com.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 9d8fa0df49)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Shannon Zhao
77df190051 arm_gicv3_kvm: increase clroffset accordingly
It forgot to increase clroffset during the loop. So it only clear the
first 4 bytes.

Fixes: 367b9f527b
Cc: qemu-stable@nongnu.org
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1527047633-12368-1-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 34ffacae08)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Peter Xu
f4b4095a8f intel-iommu: rework the page walk logic
This patch fixes a potential small window that the DMA page table might
be incomplete or invalid when the guest sends domain/context
invalidations to a device.  This can cause random DMA errors for
assigned devices.

This is a major change to the VT-d shadow page walking logic. It
includes but is not limited to:

- For each VTDAddressSpace, now we maintain what IOVA ranges we have
  mapped and what we have not.  With that information, now we only send
  MAP or UNMAP when necessary.  Say, we don't send MAP notifies if we
  know we have already mapped the range, meanwhile we don't send UNMAP
  notifies if we know we never mapped the range at all.

- Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call
  in any places to resync the shadow page table for a device.

- When we receive domain/context invalidation, we should not really run
  the replay logic, instead we use the new sync shadow page table API to
  resync the whole shadow page table without unmapping the whole
  region.  After this change, we'll only do the page walk once for each
  domain invalidations (before this, it can be multiple, depending on
  number of notifiers per address space).

While at it, the page walking logic is also refactored to be simpler.

CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Tested-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 63b88968f1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Peter Xu
08aa25f5f8 util: implement simple iova tree
Introduce a simplest iova tree implementation based on GTree.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit eecf5eedbd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Peter Xu
d5c60a950a intel-iommu: trace domain id during page walk
This patch only modifies the trace points.

Previously we were tracing page walk levels.  They are redundant since
we have page mask (size) already.  Now we trace something much more
useful which is the domain ID of the page walking.  That can be very
useful when we trace more than one devices on the same system, so that
we can know which map is for which domain.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit d118c06ebb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Peter Xu
78b85a98a3 intel-iommu: pass in address space when page walk
We pass in the VTDAddressSpace too.  It'll be used in the follow up
patches.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2f764fa87d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Peter Xu
28048f7bcd intel-iommu: introduce vtd_page_walk_info
During the recursive page walking of IOVA page tables, some stack
variables are constant variables and never changed during the whole page
walking procedure.  Isolate them into a struct so that we don't need to
pass those contants down the stack every time and multiple times.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit fe215b0cbb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Peter Xu
1e5b93f620 intel-iommu: only do page walk for MAP notifiers
For UNMAP-only IOMMU notifiers, we don't need to walk the page tables.
Fasten that procedure by skipping the page table walk.  That should
boost performance for UNMAP-only notifiers like vhost.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 4f8a62a933)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Peter Xu
5cf61b56a4 intel-iommu: add iommu lock
SECURITY IMPLICATION: this patch fixes a potential race when multiple
threads access the IOMMU IOTLB cache.

Add a per-iommu big lock to protect IOMMU status.  Currently the only
thing to be protected is the IOTLB/context cache, since that can be
accessed even without BQL, e.g., in IO dataplane.

Note that we don't need to protect device page tables since that's fully
controlled by the guest kernel.  However there is still possibility that
malicious drivers will program the device to not obey the rule.  In that
case QEMU can't really do anything useful, instead the guest itself will
be responsible for all uncertainties.

CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 1d9efa73e1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Peter Xu
d64604326f intel-iommu: remove IntelIOMMUNotifierNode
That is not really necessary.  Removing that node struct and put the
list entry directly into VTDAddressSpace.  It simplfies the code a lot.
Since at it, rename the old notifiers_list into vtd_as_with_notifiers.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit b4a4ba0d68)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Peter Xu
93a53137be intel-iommu: send PSI always even if across PDEs
SECURITY IMPLICATION: without this patch, any guest with both assigned
device and a vIOMMU might encounter stale IO page mappings even if guest
has already unmapped the page, which may lead to guest memory
corruption.  The stale mappings will only be limited to the guest's own
memory range, so it should not affect the host memory or other guests on
the host.

During IOVA page table walking, there is a special case when the PSI
covers one whole PDE (Page Directory Entry, which contains 512 Page
Table Entries) or more.  In the past, we skip that entry and we don't
notify the IOMMU notifiers.  This is not correct.  We should send UNMAP
notification to registered UNMAP notifiers in this case.

For UNMAP only notifiers, this might cause IOTLBs cached in the devices
even if they were already invalid.  For MAP/UNMAP notifiers like
vfio-pci, this will cause stale page mappings.

This special case doesn't trigger often, but it is very easy to be
triggered by nested device assignments, since in that case we'll
possibly map the whole L2 guest RAM region into the device's IOVA
address space (several GBs at least), which is far bigger than normal
kernel driver usages of the device (tens of MBs normally).

Without this patch applied to L1 QEMU, nested device assignment to L2
guests will dump some errors like:

qemu-system-x86_64: VFIO_MAP_DMA: -17
qemu-system-x86_64: vfio_dma_map(0x557305420c30, 0xad000, 0x1000,
                    0x7f89a920d000) = -17 (File exists)

CC: QEMU Stable <qemu-stable@nongnu.org>
Acked-by: Jason Wang <jasowang@redhat.com>
[peterx: rewrite the commit message]
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit 36d2d52bdb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Jan Kiszka
91f6149592 hw/intc/arm_gicv3: Fix APxR<n> register dispatching
There was a nasty flip in identifying which register group an access is
targeting. The issue caused spuriously raised priorities of the guest
when handing CPUs over in the Jailhouse hypervisor.

Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 28b927d3-da58-bce4-cc13-bfec7f9b1cb9@siemens.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 887aae10f6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Michal Privoznik
81e46e3c82 console: Avoid segfault in screendump
After f771c5440e it is possible to select device and
head which to take screendump from. And even though we check if
provided head number falls within range, it may still happen that
the console has no surface yet leading to SIGSEGV:

  qemu.git $ ./x86_64-softmmu/qemu-system-x86_64 \
    -qmp stdio \
    -device virtio-vga,id=video0,max_outputs=4

  {"execute":"qmp_capabilities"}
  {"execute":"screendump", "arguments":{"filename":"/tmp/screen.ppm", "device":"video0", "head":1}}
  Segmentation fault

 #0  0x00005628249dda88 in ppm_save (filename=0x56282826cbc0 "/tmp/screen.ppm", ds=0x0, errp=0x7fff52a6fae0) at ui/console.c:304
 #1  0x00005628249ddd9b in qmp_screendump (filename=0x56282826cbc0 "/tmp/screen.ppm", has_device=true, device=0x5628276902d0 "video0", has_head=true, head=1, errp=0x7fff52a6fae0) at ui/console.c:375
 #2  0x00005628247740df in qmp_marshal_screendump (args=0x562828265e00, ret=0x7fff52a6fb68, errp=0x7fff52a6fb60) at qapi/qapi-commands-ui.c:110

Here, @ds from frame #0 (or @surface from frame #1) is
dereferenced at the very beginning of ppm_save(). And because
it's NULL crash happens.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: cb05bb1909daa6ba62145c0194aafa05a14ed3d1.1526569138.git.mprivozn@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 08d9864fa4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Cornelia Huck
a5c8fbbeac s390x/ccw: make sure all ccw devices are properly reset
Thomas reported that the subchannel for a  3270 device that ended up
in a broken state (status pending even though not enabled) did not
get out of that state even after a reboot (which involves a subsytem
reset). The reason for this is that the 3270 device did not define
a reset handler.

Let's fix this by introducing a base reset handler (set up for all
ccw devices) that resets the subchannel and have virtio-ccw call
its virtio-specific reset procedure in addition to that.

CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 838fb84f83)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Cornelia Huck
c9bb077871 virtio-ccw: common reset handler
All the different virtio ccw devices use the same reset handler,
so let's move setting it into the base virtio ccw device class.

CC: qemu-stable@nongnu.org
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 0c53057adb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Thomas Huth
3372a3168a pc-bios/s390-ccw: struct tpi_info must be declared as aligned(4)
I've run into a compilation error today with the current version of GCC 8:

In file included from s390-ccw.h:49,
                 from main.c:12:
cio.h:128:1: error: alignment 1 of 'struct tpi_info' is less than 4 [-Werror=packed-not-aligned]
 } __attribute__ ((packed));
 ^
cc1: all warnings being treated as errors

Since the struct tpi_info contains an element ("struct subchannel_id schid")
which is marked as aligned(4), we've got to mark the struct tpi_info as
aligned(4), too.

CC: qemu-stable@nongnu.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525774672-11913-1-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit a6e4385dea)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Cornelia Huck
87efdb9820 s390x/css: disabled subchannels cannot be status pending
The 3270 code will try to post an attention interrupt when the
3270 emulator (e.g. x3270) attaches. If the guest has not yet
enabled the subchannel for the 3270 device, we will present a spurious
cc 1 (status pending) when it uses msch on it later on, e.g. when
trying to enable the subchannel.

To fix this, just don't do anything in css_conditional_io_interrupt()
if the subchannel is not enabled. The 3270 code will work fine with
that, and the other user of this function (virtio-ccw) never
attempts to post an interrupt for a disabled device to begin with.

CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 6e9c893ecd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Fam Zheng
51691e9244 raw: Check byte range uniformly
We don't verify the request range against s->size in the I/O callbacks
except for raw_co_pwritev. This is inconsistent (especially for
raw_co_pwrite_zeroes and raw_co_pdiscard), so fix them, in the meanwhile
make the helper reusable by the coming new callbacks.

Note that in most cases the block layer already verifies the request
byte range against our reported image length, before invoking the driver
callbacks.  The exception is during image creating, after
blk_set_allow_write_beyond_eof(blk, true) is called. But in that case,
the requests are not directly from the user or guest. So there is no
visible behavior change in adding the check code.

The int64_t -> uint64_t inconsistency, as shown by the type casting, is
pre-existing due to the interface.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180601092648.24614-3-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 3844553852)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Michael Walle
4f9df08749 lm32: take BQL before writing IP/IM register
Writing to these registers may raise an interrupt request. Actually,
this prevents the milkymist board from starting.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
(cherry picked from commit 81e9cbd0ca)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Max Reitz
ca3150da6d iotests: Add test for -U/force-share conflicts
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 4e7d73c5fb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Max Reitz
9e724c05a0 qemu-img: Use only string options in img_open_opts
img_open_opts() takes a QemuOpts and converts them to a QDict, so all
values therein are strings.  Then it may try to call qdict_get_bool(),
however, which will fail with a segmentation fault every time:

$ ./qemu-img info -U --image-opts \
    driver=file,filename=/dev/null,force-share=off
[1]    27869 segmentation fault (core dumped)  ./qemu-img info -U
--image-opts driver=file,filename=/dev/null,force-share=off

Fix this by using qdict_get_str() and comparing the value as a string.
Also, when adding a force-share value to the QDict, add it as a string
so it fits the rest of the dict.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 4615f87832)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Max Reitz
e8d8f6a3aa qemu-io: Use purely string blockdev options
Currently, qemu-io only uses string-valued blockdev options (as all are
converted directly from QemuOpts) -- with one exception: -U adds the
force-share option as a boolean.  This in itself is already a bit
questionable, but a real issue is that it also assumes the value already
existing in the options QDict would be a boolean, which is wrong.

That has the following effect:

$ ./qemu-io -r -U --image-opts \
    driver=file,filename=/dev/null,force-share=off
[1]    15200 segmentation fault (core dumped)  ./qemu-io -r -U
--image-opts driver=file,filename=/dev/null,force-share=off

Since @opts is converted from QemuOpts, the value must be a string, and
we have to compare it as such.  Consequently, it makes sense to also set
it as a string instead of a boolean.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 2a01c01f9e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Max Reitz
b3a18683f9 iotests: Add test for rebasing with relative paths
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509182002.8044-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 28036a7f70)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Max Reitz
f9e0e53add qemu-img: Resolve relative backing paths in rebase
Currently, rebase interprets a relative path for the new backing image
as follows:
(1) Open the new backing image with the given relative path (thus relative to
    qemu-img's working directory).
(2) Write it directly into the overlay's backing path field (thus
    relative to the overlay).

If the overlay is not in qemu-img's working directory, both will be
different interpretations, which may either lead to an error somewhere
(either rebase fails because it cannot open the new backing image, or
your overlay becomes unusable because its backing path does not point to
a file), or, even worse, it may result in your rebase being performed
for a different backing file than what your overlay will point to after
the rebase.

Fix this by interpreting the target backing path as relative to the
overlay, like qemu-img does everywhere else.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1569835
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509182002.8044-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit d16699b646)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Olaf Hering
f81672a5c6 configure: recognize more rpmbuild macros
Extend the list of recognized, but ignored options from rpms %configure
macro. This fixes build on hosts running SUSE Linux.

Cc: qemu-stable@nongnu.org
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Message-Id: <20180418075045.27393-1-olaf@aepfle.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 181ce1d05c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Gerd Hoffmann
9ec09b6542 qxl: fix local renderer crash
Make sure we only ask the spice local renderer for display updates in
case we have a valid primary surface.  Without that spice is confused
and throws errors in case a display update request (triggered by
screendump for example) happens in parallel to a mode switch and hits
the race window where the old primary surface is gone and the new isn't
establisted yet.

Cc: qemu-stable@nongnu.org
Fixes: https://bugzilla.redhat.com//show_bug.cgi?id=1567733
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180427115528.345-1-kraxel@redhat.com
(cherry picked from commit 5bd5c27c7d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Greg Kurz
2dbaba7af0 spapr: don't advertise radix GTSE if max-compat-cpu < power9
On a POWER9 host, if a guest runs in pre POWER9 compat mode, it necessarily
uses the hash MMU mode. In this case, we shouldn't advertise radix GTSE in
the ibm,arch-vec-5-platform-support DT property as the current code does.
The first reason is that it doesn't make sense, and the second one is that
causes the CAS-negotiated options subsection to be migrated. This breaks
backward migration to QEMU 2.7 and older versions on POWER8 hosts:

qemu-system-ppc64: error while loading state for instance 0x0 of device
 'spapr'
qemu-system-ppc64: load of migration failed: No such file or directory

This patch hence initialize CPUs a bit earlier so that we can check the
requested compat mode, and don't set OV5_MMU_RADIX_GTSE for power8 and
older.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 0550b1206a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Greg Kurz
62f7a38610 target/ppc: always set PPC_MEM_TLBIE in pre 2.8 migration hack
The pseries-2.7 and older machine types require CPUPPCState::insns_flags
to be strictly equal between source and destination. This checking is
abusive and breaks migration of KVM guests when the host CPU models
are different, even if they are compatible enough to allow the guest
to run transparently. This buggy behaviour was fixed for pseries-2.8
and we added some hacks to allow backward migration of older machine
types. These hacks assume that the CPU belongs to the POWER8 family,
which was true for most KVM based setup we cared about at the time.
But now POWER9 systems are coming, and backward migration of pre 2.8
guests running in POWER8 architected mode from a POWER9 host to a
POWER8 host is broken:

qemu-system-ppc64: error while loading state for instance 0x0 of device
 'cpu'
qemu-system-ppc64: load of migration failed: Invalid argument

This happens because POWER9 doesn't set PPC_MEM_TLBIE in insns_flags,
while POWER8 does. Let's force PPC_MEM_TLBIE in the migration hack to
fix the issue. This is an acceptable hack because these old machine
types only support CPU models that do set PPC_MEM_TLBIE.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit bce009645b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Peter Maydell
1ace462f9b target/arm: Implement v8M VLLDM and VLSTM
For v8M the instructions VLLDM and VLSTM support lazy saving
and restoring of the secure floating-point registers. Even
if the floating point extension is not implemented, these
instructions must act as NOPs in Secure state, so they can
be used as part of the secure-to-nonsecure call sequence.

Fixes: https://bugs.launchpad.net/qemu/+bug/1768295
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180503105730.5958-1-peter.maydell@linaro.org
(cherry picked from commit b1e5336a98)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Henry Wertz
b90c93106e tcg/arm: Fix memory barrier encoding
I found with qemu 2.11.x or newer that I would get an illegal instruction
error running some Intel binaries on my ARM chromebook.  On investigation,
I found it was quitting on memory barriers.

qemu instruction:
mb $0x31
was translating as:
0x604050cc:  5bf07ff5  blpl     #0x600250a8

After patch it gives:
0x604050cc:  f57ff05b  dmb      ish

In short, I found INSN_DMB_ISH (memory barrier for ARMv7) appeared to be
correct based on online docs, but due to some endian-related shenanigans it
had to be byte-swapped to suit qemu; it appears INSN_DMB_MCR (memory
barrier for ARMv6) also should be byte swapped  (and this patch does so).
I have not checked for correctness of aarch64's barrier instruction.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Henry Wertz <hwertz10@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 3f814b8037)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Cornelia Huck
38b7a3ea72 s390-ccw: force diag 308 subcode to unsigned long
We currently pass an integer as the subcode parameter. However,
the upper bits of the register containing the subcode need to
be 0, which is not guaranteed unless we explicitly specify the
subcode to be an unsigned long value.

Fixes: d046c51dad ("pc-bios/s390-ccw: Get device address via diag 308/6")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 63d8b5ace3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Eric Blake
cb7a41f3f9 nbd/client: Fix error messages during NBD_INFO_BLOCK_SIZE
A missing space makes for poor error messages, and sizes can't
go negative.  Also, we missed diagnosing a server that sends
a maximum block size less than the minimum.

Fixes: 081dd1fe
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180501154654.943782-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit e475d108f1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Jason Andryuk
8ca471da10 ccid: Fix dwProtocols advertisement of T=0
Commit d7d218ef02 attempted to change
dwProtocols to only advertise support for T=0 and not T=1.  The change
was incorrect as it changed 0x00000003 to 0x00010000.

lsusb -v in a linux guest shows:
"dwProtocols         65536  (Invalid values detected)", though the
smart card could still be accessed.  Windows 7 does not detect inserted
smart cards and logs the the following Error in the Event Logs:

    Source: Smart Card Service
    Event ID: 610
    Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
    Incorrect function. If this error persists, your smart card or reader
    may not be functioning correctly

    Command Header: 03 00 00 00

Setting to 0x00000001 fixes the Windows issue.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20180420183219.20722-1-jandryuk@gmail.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 0ee86bb6c5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Geert Uytterhoeven
1783745673 device_tree: Increase FDT_MAX_SIZE to 1 MiB
It is not uncommon for a contemporary FDT to be larger than 64 KiB,
leading to failures loading the device tree from sysfs:

    qemu-system-aarch64: qemu_fdt_setprop: Couldn't set ...: FDT_ERR_NOSPACE

Hence increase the limit to 1 MiB, like on PPC.

For reference, the largest arm64 DTB created from the Linux sources is
ca. 75 KiB large (100 KiB when built with symbols/fixup support).

Cc: qemu-stable@nongnu.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-id: 1523541337-23919-1-git-send-email-geert+renesas@glider.be
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 14ec3cbd7c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Marc-André Lureau
4319ae939c tests: fix tpm-crb tpm-tis tests race
No need to close the TPM data socket on the emulator end, qemu will
close it after a SHUTDOWN. This avoids a race between close() and
read() in the TPM data thread.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 7647d5c6b5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
4508 changed files with 130617 additions and 429118 deletions

View File

@@ -1,27 +0,0 @@
env:
CIRRUS_CLONE_DEPTH: 1
freebsd_12_task:
freebsd_instance:
image: freebsd-12-0-release-amd64
cpu: 8
memory: 8G
install_script: pkg install -y
bison curl cyrus-sasl git glib gmake gnutls
nettle perl5 pixman pkgconf png usbredir
script:
- mkdir build
- cd build
- ../configure || { cat config.log; exit 1; }
- gmake -j8
- gmake -j8 V=1 check
macos_task:
osx_instance:
image: mojave-base
install_script:
- brew install pkg-config python glib pixman make sdl2
script:
- ./configure --python=/usr/local/bin/python3 || { cat config.log; exit 1; }
- gmake -j$(sysctl -n hw.ncpu)
- gmake check -j$(sysctl -n hw.ncpu)

View File

@@ -1,10 +1,4 @@
# EditorConfig is a file format and collection of text editor plugins
# for maintaining consistent coding styles between different editors
# and IDEs. Most popular editors support this either natively or via
# plugin.
#
# Check https://editorconfig.org for details.
# http://editorconfig.org
root = true
[*]
@@ -12,23 +6,10 @@ end_of_line = lf
insert_final_newline = true
charset = utf-8
[*.mak]
indent_style = tab
indent_size = 8
file_type_emacs = makefile
[Makefile*]
indent_style = tab
indent_size = 8
file_type_emacs = makefile
[*.{c,h}]
indent_style = space
indent_size = 4
[*.{vert,frag}]
file_type_emacs = glsl
[*.json]
indent_style = space
file_type_emacs = python

79
.gitignore vendored
View File

@@ -1,4 +1,3 @@
/.doctrees
/config-devices.*
/config-all-devices.*
/config-all-disas.*
@@ -6,7 +5,6 @@
/config-target.*
/config.status
/config-temp
/elf2dmp
/trace-events-all
/trace/generated-events.h
/trace/generated-events.c
@@ -32,21 +30,79 @@
/qapi-gen-timestamp
/qapi/qapi-builtin-types.[ch]
/qapi/qapi-builtin-visit.[ch]
/qapi/qapi-commands-*.[ch]
/qapi/qapi-commands-block-core.[ch]
/qapi/qapi-commands-block.[ch]
/qapi/qapi-commands-char.[ch]
/qapi/qapi-commands-common.[ch]
/qapi/qapi-commands-crypto.[ch]
/qapi/qapi-commands-introspect.[ch]
/qapi/qapi-commands-migration.[ch]
/qapi/qapi-commands-misc.[ch]
/qapi/qapi-commands-net.[ch]
/qapi/qapi-commands-rocker.[ch]
/qapi/qapi-commands-run-state.[ch]
/qapi/qapi-commands-sockets.[ch]
/qapi/qapi-commands-tpm.[ch]
/qapi/qapi-commands-trace.[ch]
/qapi/qapi-commands-transaction.[ch]
/qapi/qapi-commands-ui.[ch]
/qapi/qapi-commands.[ch]
/qapi/qapi-emit-events.[ch]
/qapi/qapi-events-*.[ch]
/qapi/qapi-events-block-core.[ch]
/qapi/qapi-events-block.[ch]
/qapi/qapi-events-char.[ch]
/qapi/qapi-events-common.[ch]
/qapi/qapi-events-crypto.[ch]
/qapi/qapi-events-introspect.[ch]
/qapi/qapi-events-migration.[ch]
/qapi/qapi-events-misc.[ch]
/qapi/qapi-events-net.[ch]
/qapi/qapi-events-rocker.[ch]
/qapi/qapi-events-run-state.[ch]
/qapi/qapi-events-sockets.[ch]
/qapi/qapi-events-tpm.[ch]
/qapi/qapi-events-trace.[ch]
/qapi/qapi-events-transaction.[ch]
/qapi/qapi-events-ui.[ch]
/qapi/qapi-events.[ch]
/qapi/qapi-introspect.[ch]
/qapi/qapi-types-*.[ch]
/qapi/qapi-types-block-core.[ch]
/qapi/qapi-types-block.[ch]
/qapi/qapi-types-char.[ch]
/qapi/qapi-types-common.[ch]
/qapi/qapi-types-crypto.[ch]
/qapi/qapi-types-introspect.[ch]
/qapi/qapi-types-migration.[ch]
/qapi/qapi-types-misc.[ch]
/qapi/qapi-types-net.[ch]
/qapi/qapi-types-rocker.[ch]
/qapi/qapi-types-run-state.[ch]
/qapi/qapi-types-sockets.[ch]
/qapi/qapi-types-tpm.[ch]
/qapi/qapi-types-trace.[ch]
/qapi/qapi-types-transaction.[ch]
/qapi/qapi-types-ui.[ch]
/qapi/qapi-types.[ch]
/qapi/qapi-visit-*.[ch]
/qapi/qapi-visit-block-core.[ch]
/qapi/qapi-visit-block.[ch]
/qapi/qapi-visit-char.[ch]
/qapi/qapi-visit-common.[ch]
/qapi/qapi-visit-crypto.[ch]
/qapi/qapi-visit-introspect.[ch]
/qapi/qapi-visit-migration.[ch]
/qapi/qapi-visit-misc.[ch]
/qapi/qapi-visit-net.[ch]
/qapi/qapi-visit-rocker.[ch]
/qapi/qapi-visit-run-state.[ch]
/qapi/qapi-visit-sockets.[ch]
/qapi/qapi-visit-tpm.[ch]
/qapi/qapi-visit-trace.[ch]
/qapi/qapi-visit-transaction.[ch]
/qapi/qapi-visit-ui.[ch]
/qapi/qapi-visit.[ch]
/qapi/qapi-doc.texi
/qemu-doc.html
/qemu-doc.info
/qemu-doc.txt
/qemu-edid
/qemu-img
/qemu-nbd
/qemu-options.def
@@ -95,7 +151,6 @@
.sdk
*.gcda
*.gcno
*.gcov
/pc-bios/bios-pq/status
/pc-bios/vgabios-pq/status
/pc-bios/optionrom/linuxboot.asm
@@ -106,10 +161,6 @@
/pc-bios/optionrom/linuxboot_dma.bin
/pc-bios/optionrom/linuxboot_dma.raw
/pc-bios/optionrom/linuxboot_dma.img
/pc-bios/optionrom/pvh.asm
/pc-bios/optionrom/pvh.bin
/pc-bios/optionrom/pvh.raw
/pc-bios/optionrom/pvh.img
/pc-bios/optionrom/multiboot.asm
/pc-bios/optionrom/multiboot.bin
/pc-bios/optionrom/multiboot.raw
@@ -120,7 +171,6 @@
/pc-bios/optionrom/kvmvapic.img
/pc-bios/s390-ccw/s390-ccw.elf
/pc-bios/s390-ccw/s390-ccw.img
/docs/built
/docs/interop/qemu-ga-qapi.texi
/docs/interop/qemu-ga-ref.html
/docs/interop/qemu-ga-ref.info*
@@ -156,4 +206,3 @@ trace-dtrace-root.h
trace-dtrace-root.dtrace
trace-ust-all.h
trace-ust-all.c
/target/arm/decode-sve.inc.c

View File

@@ -1,73 +0,0 @@
before_script:
- apt-get update -qq
- apt-get install -y -qq flex bison libglib2.0-dev libpixman-1-dev genisoimage
build-system1:
script:
- apt-get install -y -qq libgtk-3-dev libvte-dev nettle-dev libcacard-dev
libusb-dev libvde-dev libspice-protocol-dev libgl1-mesa-dev
- ./configure --enable-werror --target-list="aarch64-softmmu alpha-softmmu
cris-softmmu hppa-softmmu lm32-softmmu moxie-softmmu microblazeel-softmmu
mips64el-softmmu m68k-softmmu ppc-softmmu riscv64-softmmu sparc-softmmu"
- make -j2
- make -j2 check
build-system2:
script:
- apt-get install -y -qq libsdl2-dev libgcrypt-dev libbrlapi-dev libaio-dev
libfdt-dev liblzo2-dev librdmacm-dev libibverbs-dev libibumad-dev
- ./configure --enable-werror --target-list="tricore-softmmu unicore32-softmmu
microblaze-softmmu mips-softmmu riscv32-softmmu s390x-softmmu sh4-softmmu
sparc64-softmmu x86_64-softmmu xtensa-softmmu nios2-softmmu or1k-softmmu"
- make -j2
- make -j2 check
build-disabled:
script:
- ./configure --enable-werror --disable-rdma --disable-slirp --disable-curl
--disable-capstone --disable-live-block-migration --disable-glusterfs
--disable-replication --disable-coroutine-pool --disable-smartcard
--disable-guest-agent --disable-curses --disable-libxml2 --disable-tpm
--disable-qom-cast-debug --disable-spice --disable-vhost-vsock
--disable-vhost-net --disable-vhost-crypto --disable-vhost-user
--target-list="i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user"
- make -j2
- make -j2 check-qtest SPEED=slow
build-tcg-disabled:
script:
- apt-get install -y -qq clang libgtk-3-dev libbluetooth-dev libusb-dev
- ./configure --cc=clang --enable-werror --disable-tcg --audio-drv-list=""
- make -j2
- make check-unit
- make check-qapi-schema
- cd tests/qemu-iotests/
- ./check -raw 001 002 003 004 005 008 009 010 011 012 021 025 032 033 048
052 063 077 086 101 104 106 113 147 148 150 151 152 157 159 160
163 170 171 183 184 192 194 197 205 208 215 221 222 226 227 236
- ./check -qcow2 001 002 003 004 005 007 008 009 010 011 012 013 017 018 019
020 021 022 024 025 027 028 029 031 032 033 034 035 036 037 038
039 040 042 043 046 047 048 049 050 051 052 053 054 056 057 058
060 061 062 063 065 066 067 068 069 071 072 073 074 079 080 082
085 086 089 090 091 095 096 097 098 099 102 103 104 105 107 108
110 111 114 117 120 122 124 126 127 129 130 132 133 134 137 138
139 140 141 142 143 144 145 147 150 151 152 154 155 156 157 158
161 165 170 172 174 176 177 179 184 186 187 190 192 194 195 196
197 200 202 203 205 208 209 214 215 216 217 218 222 226 227 229 234
build-user:
script:
- ./configure --enable-werror --disable-system --disable-guest-agent
--disable-capstone --disable-slirp --disable-fdt
- make -j2
- make run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
build-clang:
script:
- apt-get install -y -qq clang libsdl2-dev
xfslibs-dev libiscsi-dev libnfs-dev libseccomp-dev gnutls-dev librbd-dev
- ./configure --cc=clang --cxx=clang++ --enable-werror
--target-list="alpha-softmmu arm-softmmu m68k-softmmu mips64-softmmu
ppc-softmmu s390x-softmmu x86_64-softmmu arm-linux-user"
- make -j2
- make -j2 check

42
.gitmodules vendored
View File

@@ -1,54 +1,48 @@
[submodule "roms/vgabios"]
path = roms/vgabios
url = git://git.qemu-project.org/vgabios.git/
[submodule "roms/seabios"]
path = roms/seabios
url = https://git.qemu.org/git/seabios.git/
url = git://git.qemu-project.org/seabios.git/
[submodule "roms/SLOF"]
path = roms/SLOF
url = https://git.qemu.org/git/SLOF.git
url = git://git.qemu-project.org/SLOF.git
[submodule "roms/ipxe"]
path = roms/ipxe
url = https://git.qemu.org/git/ipxe.git
url = git://git.qemu-project.org/ipxe.git
[submodule "roms/openbios"]
path = roms/openbios
url = https://git.qemu.org/git/openbios.git
url = git://git.qemu-project.org/openbios.git
[submodule "roms/openhackware"]
path = roms/openhackware
url = https://git.qemu.org/git/openhackware.git
url = git://git.qemu-project.org/openhackware.git
[submodule "roms/qemu-palcode"]
path = roms/qemu-palcode
url = https://git.qemu.org/git/qemu-palcode.git
url = git://git.qemu.org/qemu-palcode.git
[submodule "roms/sgabios"]
path = roms/sgabios
url = https://git.qemu.org/git/sgabios.git
url = git://git.qemu-project.org/sgabios.git
[submodule "dtc"]
path = dtc
url = https://git.qemu.org/git/dtc.git
url = git://git.qemu-project.org/dtc.git
[submodule "roms/u-boot"]
path = roms/u-boot
url = https://git.qemu.org/git/u-boot.git
url = git://git.qemu-project.org/u-boot.git
[submodule "roms/skiboot"]
path = roms/skiboot
url = https://git.qemu.org/git/skiboot.git
url = git://git.qemu.org/skiboot.git
[submodule "roms/QemuMacDrivers"]
path = roms/QemuMacDrivers
url = https://git.qemu.org/git/QemuMacDrivers.git
url = git://git.qemu.org/QemuMacDrivers.git
[submodule "ui/keycodemapdb"]
path = ui/keycodemapdb
url = https://git.qemu.org/git/keycodemapdb.git
url = git://git.qemu.org/keycodemapdb.git
[submodule "capstone"]
path = capstone
url = https://git.qemu.org/git/capstone.git
url = git://git.qemu.org/capstone.git
[submodule "roms/seabios-hppa"]
path = roms/seabios-hppa
url = https://github.com/hdeller/seabios-hppa.git
url = git://github.com/hdeller/seabios-hppa.git
[submodule "roms/u-boot-sam460ex"]
path = roms/u-boot-sam460ex
url = https://git.qemu.org/git/u-boot-sam460ex.git
[submodule "tests/fp/berkeley-testfloat-3"]
path = tests/fp/berkeley-testfloat-3
url = https://github.com/cota/berkeley-testfloat-3
[submodule "tests/fp/berkeley-softfloat-3"]
path = tests/fp/berkeley-softfloat-3
url = https://github.com/cota/berkeley-softfloat-3
[submodule "roms/edk2"]
path = roms/edk2
url = https://github.com/tianocore/edk2.git
url = git://git.qemu.org/u-boot-sam460ex.git

View File

@@ -12,12 +12,8 @@ Fabrice Bellard <fabrice@bellard.org> bellard <bellard@c046a42c-6fe2-441c-8c8c-7
James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
Jocelyn Mayer <l_indien@magic.fr> j_mayer <j_mayer@c046a42c-6fe2-441c-8c8c-71466251a162>
Paul Brook <paul@codesourcery.com> pbrook <pbrook@c046a42c-6fe2-441c-8c8c-71466251a162>
Yongbok Kim <yongbok.kim@mips.com> <yongbok.kim@imgtec.com>
Aleksandar Markovic <amarkovic@wavecomp.com> <aleksandar.markovic@mips.com>
Aleksandar Markovic <amarkovic@wavecomp.com> <aleksandar.markovic@imgtec.com>
Paul Burton <pburton@wavecomp.com> <paul.burton@mips.com>
Paul Burton <pburton@wavecomp.com> <paul.burton@imgtec.com>
Paul Burton <pburton@wavecomp.com> <paul@archlinuxmips.org>
Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>
Paul Burton <paul.burton@mips.com> <paul@archlinuxmips.org>
Thiemo Seufer <ths@networkno.de> ths <ths@c046a42c-6fe2-441c-8c8c-71466251a162>
malc <av1474@comtv.ru> malc <malc@c046a42c-6fe2-441c-8c8c-71466251a162>
@@ -34,6 +30,5 @@ Justin Terry (VM) <juterry@microsoft.com> Justin Terry (VM) via Qemu-devel <qemu
# Also list preferred name forms where people have changed their
# git author config, or had utf8/latin1 encoding issues.
# git author config
Daniel P. Berrangé <berrange@redhat.com>
Reimar Döffinger <Reimar.Doeffinger@gmx.de>

View File

@@ -7,11 +7,10 @@ env:
matrix:
- IMAGE=debian-amd64
TARGET_LIST=x86_64-softmmu,x86_64-linux-user
# currently disabled as the mxe.cc repos are down
# - IMAGE=debian-win32-cross
# TARGET_LIST=arm-softmmu,i386-softmmu,lm32-softmmu
# - IMAGE=debian-win64-cross
# TARGET_LIST=aarch64-softmmu,sparc64-softmmu,x86_64-softmmu
- IMAGE=debian-win32-cross
TARGET_LIST=arm-softmmu,i386-softmmu,lm32-softmmu
- IMAGE=debian-win64-cross
TARGET_LIST=aarch64-softmmu,sparc64-softmmu,x86_64-softmmu
- IMAGE=debian-armel-cross
TARGET_LIST=arm-softmmu,arm-linux-user,armeb-linux-user
- IMAGE=debian-armhf-cross
@@ -36,5 +35,13 @@ build:
options: "-e HOME=/root"
ci:
- unset CC
# some targets require newer up to date packages, for example TARGET_LIST matching
# aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu|mips64el-softmmu)
# see the configure script:
# error_exit "DTC (libfdt) version >= 1.4.2 not present. Your options:"
# " (1) Preferred: Install the DTC (libfdt) devel package"
# " (2) Fetch the DTC submodule, using:"
# " git submodule update --init dtc"
- dpkg --compare-versions `dpkg-query --showformat='${Version}' --show libfdt-dev` ge 1.4.2 || git submodule update --init dtc
- ./configure ${QEMU_CONFIGURE_OPTS} --target-list=${TARGET_LIST}
- make -j$(($(getconf _NPROCESSORS_ONLN) + 1))

View File

@@ -1,13 +1,10 @@
# The current Travis default is a VM based 16.04 Xenial on GCE
# Additional builds with specific requirements for a full VM need to
# be added as additional matrix: entries later on
dist: xenial
sudo: false
language: c
python:
- "2.6"
compiler:
- gcc
cache: ccache
addons:
apt:
packages:
@@ -34,15 +31,9 @@ addons:
- libssh2-1-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvte-2.91-dev
- libvte-2.90-dev
- sparse
- uuid-dev
- gcovr
homebrew:
packages:
- glib
- pixman
# The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu
# to prevent IRC notifications from forks. This was created using:
@@ -53,194 +44,131 @@ notifications:
- secure: "F7GDRgjuOo5IUyRLqSkmDL7kvdU4UcH3Lm/W2db2JnDHTGCqgEdaYEYKciyCLZ57vOTsTsOgesN8iUT7hNHBd1KWKjZe9KDTZWppWRYVwAwQMzVeSOsbbU4tRoJ6Pp+3qhH1Z0eGYR9ZgKYAoTumDFgSAYRp4IscKS8jkoedOqM="
on_success: change
on_failure: always
env:
global:
- SRC_DIR="."
- BUILD_DIR="."
- BASE_CONFIG="--disable-docs --disable-tools"
- TEST_CMD="make check -j3 V=1"
# This is broadly a list of "mainline" softmmu targets which have support across the major distros
- MAIN_SOFTMMU_TARGETS="aarch64-softmmu,arm-softmmu,i386-softmmu,mips-softmmu,mips64-softmmu,ppc64-softmmu,riscv64-softmmu,s390x-softmmu,x86_64-softmmu"
- TEST_CMD="make check"
- MAKEFLAGS="-j3"
matrix:
- CONFIG="--disable-system"
- CONFIG="--disable-user"
- CONFIG="--enable-debug --enable-debug-tcg"
- CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-uuid --disable-libusb --disable-user"
- CONFIG="--enable-modules --disable-linux-user"
- CONFIG="--with-coroutine=ucontext --disable-linux-user"
- CONFIG="--with-coroutine=sigaltstack --disable-linux-user"
git:
# we want to do this ourselves
submodules: false
before_install:
- if [ "$TRAVIS_OS_NAME" == "osx" ]; then brew update ; fi
- if [ "$TRAVIS_OS_NAME" == "osx" ]; then brew install libffi gettext glib pixman ; fi
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
before_script:
- mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
- ${SRC_DIR}/configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
- ./configure ${CONFIG}
script:
- make -j3 && ${TEST_CMD}
- make ${MAKEFLAGS} && ${TEST_CMD}
matrix:
include:
- env:
- CONFIG="--disable-system"
# we split the system builds as it takes a while to build them all
- env:
- CONFIG="--disable-user --target-list=${MAIN_SOFTMMU_TARGETS}"
- env:
- CONFIG="--disable-user --target-list-exclude=${MAIN_SOFTMMU_TARGETS}"
# Just build tools and run minimal unit and softfloat checks
- env:
- BASE_CONFIG="--enable-tools"
- CONFIG="--disable-user --disable-system"
- TEST_CMD="make check-unit check-softfloat -j3"
- env:
- CONFIG="--enable-debug --enable-debug-tcg --disable-user"
# TCG debug can be run just on it's own and is mostly agnostic to user/softmmu distinctions
- env:
- CONFIG="--enable-debug-tcg --disable-system"
- env:
- CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-libusb --disable-replication --target-list=${MAIN_SOFTMMU_TARGETS}"
# Module builds are mostly of interest to major distros
- env:
- CONFIG="--enable-modules --target-list=${MAIN_SOFTMMU_TARGETS}"
# Alternate coroutines implementations are only really of interest to KVM users
# However we can't test against KVM on Travis so we can only run unit tests
- env:
- CONFIG="--with-coroutine=ucontext --disable-tcg"
- TEST_CMD="make check-unit -j3 V=1"
- env:
- CONFIG="--with-coroutine=sigaltstack --disable-tcg"
- TEST_CMD="make check-unit -j3 V=1"
# Check we can build docs and tools (out of tree)
- env:
- BUILD_DIR="out-of-tree/build/dir" SRC_DIR="../../.."
- BASE_CONFIG="--enable-tools --enable-docs"
- CONFIG="--target-list=x86_64-softmmu,aarch64-linux-user"
addons:
apt:
packages:
- python-sphinx
- texinfo
- perl
# Test with Clang for compile portability (Travis uses clang-5.0)
- env:
- CONFIG="--disable-system"
# Test with CLang for compile portability
- env: CONFIG=""
compiler: clang
- env:
- CONFIG="--disable-user --target-list=${MAIN_SOFTMMU_TARGETS}"
compiler: clang
- env:
- CONFIG="--disable-user --target-list-exclude=${MAIN_SOFTMMU_TARGETS}"
compiler: clang
# gprof/gcov are GCC features
- env:
- CONFIG="--enable-gprof --enable-gcov --disable-pie --target-list=${MAIN_SOFTMMU_TARGETS}"
after_success:
- ${SRC_DIR}/scripts/travis/coverage-summary.sh
- env: CONFIG="--enable-gprof --enable-gcov --disable-pie"
compiler: gcc
# We manually include builds which we disable "make check" for
- env:
- CONFIG="--without-default-devices --disable-user"
- TEST_CMD=""
# We manually include builds which we disable "make check" for
- env:
- CONFIG="--enable-debug --enable-tcg-interpreter"
- TEST_CMD=""
# We don't need to exercise every backend with every front-end
- env:
- CONFIG="--enable-trace-backends=log,simple,syslog --disable-system"
- TEST_CMD=""
- env:
- CONFIG="--enable-trace-backends=ftrace --target-list=x86_64-softmmu"
- TEST_CMD=""
- env:
- CONFIG="--enable-trace-backends=ust --target-list=x86_64-softmmu"
- TEST_CMD=""
# MacOSX builds
- env:
- CONFIG="--target-list=${MAIN_SOFTMMU_TARGETS}"
- env: CONFIG="--enable-debug --enable-tcg-interpreter"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--enable-trace-backends=simple"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--enable-trace-backends=ftrace"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--enable-trace-backends=ust"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--disable-tcg"
TEST_CMD=""
compiler: gcc
- env: CONFIG=""
os: osx
osx_image: xcode9.4
compiler: clang
- env:
- CONFIG="--target-list=i386-softmmu,ppc-softmmu,ppc64-softmmu,m68k-softmmu,x86_64-softmmu"
os: osx
osx_image: xcode10.2
compiler: clang
# Python builds
- env:
- CONFIG="--target-list=x86_64-softmmu"
language: python
# Plain Trusty System Build
- env: CONFIG="--disable-linux-user"
sudo: required
addons:
dist: trusty
compiler: gcc
before_install:
- sudo apt-get update -qq
- sudo apt-get build-dep -qq qemu
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
# Plain Trusty Linux User Build
- env: CONFIG="--disable-system"
sudo: required
addons:
dist: trusty
compiler: gcc
before_install:
- sudo apt-get update -qq
- sudo apt-get build-dep -qq qemu
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
# Trusty System build with latest stable clang & python 3.0
- sudo: required
addons:
dist: trusty
language: generic
compiler: none
python:
- "3.4"
- env:
- CONFIG="--target-list=x86_64-softmmu"
language: python
- "3.0"
env:
- COMPILER_NAME=clang CXX=clang++-3.9 CC=clang-3.9
- CONFIG="--disable-linux-user --cc=clang-3.9 --cxx=clang++-3.9 --python=/usr/bin/python3"
before_install:
- wget -nv -O - http://llvm.org/apt/llvm-snapshot.gpg.key | sudo apt-key add -
- sudo apt-add-repository -y 'deb http://llvm.org/apt/trusty llvm-toolchain-trusty-3.9 main'
- sudo apt-get update -qq
- sudo apt-get install -qq -y clang-3.9
- sudo apt-get build-dep -qq qemu
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
before_script:
- ./configure ${CONFIG} || cat config.log
# Trusty Linux User build with latest stable clang & python 3.6
- sudo: required
addons:
dist: trusty
language: generic
compiler: none
python:
- "3.6"
# Acceptance (Functional) tests
- env:
- CONFIG="--python=/usr/bin/python3 --target-list=x86_64-softmmu"
- TEST_CMD="make AVOCADO_SHOW=app check-acceptance"
addons:
apt:
packages:
- python3-pip
- python3.5-venv
env:
- COMPILER_NAME=clang CXX=clang++-3.9 CC=clang-3.9
- CONFIG="--disable-system --cc=clang-3.9 --cxx=clang++-3.9 --python=/usr/bin/python3"
before_install:
- wget -nv -O - http://llvm.org/apt/llvm-snapshot.gpg.key | sudo apt-key add -
- sudo apt-add-repository -y 'deb http://llvm.org/apt/trusty llvm-toolchain-trusty-3.9 main'
- sudo apt-get update -qq
- sudo apt-get install -qq -y clang-3.9
- sudo apt-get build-dep -qq qemu
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
before_script:
- ./configure ${CONFIG} || cat config.log
# Using newer GCC with sanitizers
- addons:
apt:
update: true
sources:
# PPAs for newer toolchains
- ubuntu-toolchain-r-test
packages:
# Extra toolchains
- gcc-7
- g++-7
- gcc-5
- g++-5
# Build dependencies
- libaio-dev
- libattr1-dev
@@ -263,25 +191,14 @@ matrix:
- libssh2-1-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvte-2.91-dev
- libvte-2.90-dev
- sparse
- uuid-dev
language: generic
compiler: none
env:
- COMPILER_NAME=gcc CXX=g++-7 CC=gcc-7
- CONFIG="--cc=gcc-7 --cxx=g++-7 --disable-pie --disable-linux-user"
- COMPILER_NAME=gcc CXX=g++-5 CC=gcc-5
- CONFIG="--cc=gcc-5 --cxx=g++-5 --disable-pie --disable-linux-user"
- TEST_CMD=""
before_script:
- ./configure ${CONFIG} --extra-cflags="-g3 -O0 -fsanitize=thread -fuse-ld=gold" || { cat config.log && exit 1; }
# Run check-tcg against linux-user
- env:
- CONFIG="--disable-system"
- TEST_CMD="make -j3 check-tcg V=1"
# Run check-tcg against softmmu targets
- env:
- CONFIG="--target-list=xtensa-softmmu,arm-softmmu"
- TEST_CMD="make -j3 check-tcg V=1"
- ./configure ${CONFIG} --extra-cflags="-g3 -O0 -fsanitize=thread -fuse-ld=gold" || cat config.log

View File

@@ -124,23 +124,6 @@ We use traditional C-style /* */ comments and avoid // comments.
Rationale: The // form is valid in C99, so this is purely a matter of
consistency of style. The checkpatch script will warn you about this.
Multiline comment blocks should have a row of stars on the left,
and the initial /* and terminating */ both on their own lines:
/*
* like
* this
*/
This is the same format required by the Linux kernel coding style.
(Some of the existing comments in the codebase use the GNU Coding
Standards form which does not have stars on the left, or other
variations; avoid these when writing new comments, but don't worry
about converting to the preferred form unless you're editing that
comment anyway.)
Rationale: Consistency, and ease of visually picking out a multiline
comment from the surrounding code.
8. trace-events style
8.1 0x prefix

View File

@@ -1,8 +1,8 @@
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
@@ -10,7 +10,7 @@
as the successor of the GNU Library Public License, version 2, hence
the version number 2.1.]
Preamble
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
@@ -112,7 +112,7 @@ modification follow. Pay close attention to the difference between a
former contains code derived from the library, whereas the latter must
be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other
@@ -146,7 +146,7 @@ such a program is covered only if its contents constitute a work based
on the Library (independent of the use of the Library in a tool for
writing it). Whether that is true depends on what the Library does
and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
@@ -432,7 +432,7 @@ decision will be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
@@ -455,7 +455,7 @@ FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
@@ -476,7 +476,7 @@ convey the exclusion of warranty; and each file should have at least the
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -485,7 +485,7 @@ convey the exclusion of warranty; and each file should have at least the
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
@@ -500,3 +500,5 @@ necessary. Here is a sample; alter the names:
Ty Coon, President of Vice
That's all there is to it!

270
COPYING.PYTHON Normal file
View File

@@ -0,0 +1,270 @@
A. HISTORY OF THE SOFTWARE
==========================
Python was created in the early 1990s by Guido van Rossum at Stichting
Mathematisch Centrum (CWI, see http://www.cwi.nl) in the Netherlands
as a successor of a language called ABC. Guido remains Python's
principal author, although it includes many contributions from others.
In 1995, Guido continued his work on Python at the Corporation for
National Research Initiatives (CNRI, see http://www.cnri.reston.va.us)
in Reston, Virginia where he released several versions of the
software.
In May 2000, Guido and the Python core development team moved to
BeOpen.com to form the BeOpen PythonLabs team. In October of the same
year, the PythonLabs team moved to Digital Creations (now Zope
Corporation, see http://www.zope.com). In 2001, the Python Software
Foundation (PSF, see http://www.python.org/psf/) was formed, a
non-profit organization created specifically to own Python-related
Intellectual Property. Zope Corporation is a sponsoring member of
the PSF.
All Python releases are Open Source (see http://www.opensource.org for
the Open Source Definition). Historically, most, but not all, Python
releases have also been GPL-compatible; the table below summarizes
the various releases.
Release Derived Year Owner GPL-
from compatible? (1)
0.9.0 thru 1.2 1991-1995 CWI yes
1.3 thru 1.5.2 1.2 1995-1999 CNRI yes
1.6 1.5.2 2000 CNRI no
2.0 1.6 2000 BeOpen.com no
1.6.1 1.6 2001 CNRI yes (2)
2.1 2.0+1.6.1 2001 PSF no
2.0.1 2.0+1.6.1 2001 PSF yes
2.1.1 2.1+2.0.1 2001 PSF yes
2.2 2.1.1 2001 PSF yes
2.1.2 2.1.1 2002 PSF yes
2.1.3 2.1.2 2002 PSF yes
2.2.1 2.2 2002 PSF yes
2.2.2 2.2.1 2002 PSF yes
2.2.3 2.2.2 2003 PSF yes
2.3 2.2.2 2002-2003 PSF yes
2.3.1 2.3 2002-2003 PSF yes
2.3.2 2.3.1 2002-2003 PSF yes
2.3.3 2.3.2 2002-2003 PSF yes
2.3.4 2.3.3 2004 PSF yes
2.3.5 2.3.4 2005 PSF yes
2.4 2.3 2004 PSF yes
2.4.1 2.4 2005 PSF yes
2.4.2 2.4.1 2005 PSF yes
2.4.3 2.4.2 2006 PSF yes
2.5 2.4 2006 PSF yes
2.7 2.6 2010 PSF yes
Footnotes:
(1) GPL-compatible doesn't mean that we're distributing Python under
the GPL. All Python licenses, unlike the GPL, let you distribute
a modified version without making your changes open source. The
GPL-compatible licenses make it possible to combine Python with
other software that is released under the GPL; the others don't.
(2) According to Richard Stallman, 1.6.1 is not GPL-compatible,
because its license has a choice of law clause. According to
CNRI, however, Stallman's lawyer has told CNRI's lawyer that 1.6.1
is "not incompatible" with the GPL.
Thanks to the many outside volunteers who have worked under Guido's
direction to make these releases possible.
B. TERMS AND CONDITIONS FOR ACCESSING OR OTHERWISE USING PYTHON
===============================================================
PYTHON SOFTWARE FOUNDATION LICENSE VERSION 2
--------------------------------------------
1. This LICENSE AGREEMENT is between the Python Software Foundation
("PSF"), and the Individual or Organization ("Licensee") accessing and
otherwise using this software ("Python") in source or binary form and
its associated documentation.
2. Subject to the terms and conditions of this License Agreement, PSF
hereby grants Licensee a nonexclusive, royalty-free, world-wide
license to reproduce, analyze, test, perform and/or display publicly,
prepare derivative works, distribute, and otherwise use Python
alone or in any derivative version, provided, however, that PSF's
License Agreement and PSF's notice of copyright, i.e., "Copyright (c)
2001, 2002, 2003, 2004, 2005, 2006 Python Software Foundation; All Rights
Reserved" are retained in Python alone or in any derivative version
prepared by Licensee.
3. In the event Licensee prepares a derivative work that is based on
or incorporates Python or any part thereof, and wants to make
the derivative work available to others as provided herein, then
Licensee hereby agrees to include in any such work a brief summary of
the changes made to Python.
4. PSF is making Python available to Licensee on an "AS IS"
basis. PSF MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR
IMPLIED. BY WAY OF EXAMPLE, BUT NOT LIMITATION, PSF MAKES NO AND
DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF PYTHON WILL NOT
INFRINGE ANY THIRD PARTY RIGHTS.
5. PSF SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF PYTHON
FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS AS
A RESULT OF MODIFYING, DISTRIBUTING, OR OTHERWISE USING PYTHON,
OR ANY DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.
6. This License Agreement will automatically terminate upon a material
breach of its terms and conditions.
7. Nothing in this License Agreement shall be deemed to create any
relationship of agency, partnership, or joint venture between PSF and
Licensee. This License Agreement does not grant permission to use PSF
trademarks or trade name in a trademark sense to endorse or promote
products or services of Licensee, or any third party.
8. By copying, installing or otherwise using Python, Licensee
agrees to be bound by the terms and conditions of this License
Agreement.
BEOPEN.COM LICENSE AGREEMENT FOR PYTHON 2.0
-------------------------------------------
BEOPEN PYTHON OPEN SOURCE LICENSE AGREEMENT VERSION 1
1. This LICENSE AGREEMENT is between BeOpen.com ("BeOpen"), having an
office at 160 Saratoga Avenue, Santa Clara, CA 95051, and the
Individual or Organization ("Licensee") accessing and otherwise using
this software in source or binary form and its associated
documentation ("the Software").
2. Subject to the terms and conditions of this BeOpen Python License
Agreement, BeOpen hereby grants Licensee a non-exclusive,
royalty-free, world-wide license to reproduce, analyze, test, perform
and/or display publicly, prepare derivative works, distribute, and
otherwise use the Software alone or in any derivative version,
provided, however, that the BeOpen Python License is retained in the
Software, alone or in any derivative version prepared by Licensee.
3. BeOpen is making the Software available to Licensee on an "AS IS"
basis. BEOPEN MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR
IMPLIED. BY WAY OF EXAMPLE, BUT NOT LIMITATION, BEOPEN MAKES NO AND
DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF THE SOFTWARE WILL NOT
INFRINGE ANY THIRD PARTY RIGHTS.
4. BEOPEN SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF THE
SOFTWARE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS
AS A RESULT OF USING, MODIFYING OR DISTRIBUTING THE SOFTWARE, OR ANY
DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.
5. This License Agreement will automatically terminate upon a material
breach of its terms and conditions.
6. This License Agreement shall be governed by and interpreted in all
respects by the law of the State of California, excluding conflict of
law provisions. Nothing in this License Agreement shall be deemed to
create any relationship of agency, partnership, or joint venture
between BeOpen and Licensee. This License Agreement does not grant
permission to use BeOpen trademarks or trade names in a trademark
sense to endorse or promote products or services of Licensee, or any
third party. As an exception, the "BeOpen Python" logos available at
http://www.pythonlabs.com/logos.html may be used according to the
permissions granted on that web page.
7. By copying, installing or otherwise using the software, Licensee
agrees to be bound by the terms and conditions of this License
Agreement.
CNRI LICENSE AGREEMENT FOR PYTHON 1.6.1
---------------------------------------
1. This LICENSE AGREEMENT is between the Corporation for National
Research Initiatives, having an office at 1895 Preston White Drive,
Reston, VA 20191 ("CNRI"), and the Individual or Organization
("Licensee") accessing and otherwise using Python 1.6.1 software in
source or binary form and its associated documentation.
2. Subject to the terms and conditions of this License Agreement, CNRI
hereby grants Licensee a nonexclusive, royalty-free, world-wide
license to reproduce, analyze, test, perform and/or display publicly,
prepare derivative works, distribute, and otherwise use Python 1.6.1
alone or in any derivative version, provided, however, that CNRI's
License Agreement and CNRI's notice of copyright, i.e., "Copyright (c)
1995-2001 Corporation for National Research Initiatives; All Rights
Reserved" are retained in Python 1.6.1 alone or in any derivative
version prepared by Licensee. Alternately, in lieu of CNRI's License
Agreement, Licensee may substitute the following text (omitting the
quotes): "Python 1.6.1 is made available subject to the terms and
conditions in CNRI's License Agreement. This Agreement together with
Python 1.6.1 may be located on the Internet using the following
unique, persistent identifier (known as a handle): 1895.22/1013. This
Agreement may also be obtained from a proxy server on the Internet
using the following URL: http://hdl.handle.net/1895.22/1013".
3. In the event Licensee prepares a derivative work that is based on
or incorporates Python 1.6.1 or any part thereof, and wants to make
the derivative work available to others as provided herein, then
Licensee hereby agrees to include in any such work a brief summary of
the changes made to Python 1.6.1.
4. CNRI is making Python 1.6.1 available to Licensee on an "AS IS"
basis. CNRI MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR
IMPLIED. BY WAY OF EXAMPLE, BUT NOT LIMITATION, CNRI MAKES NO AND
DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF PYTHON 1.6.1 WILL NOT
INFRINGE ANY THIRD PARTY RIGHTS.
5. CNRI SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF PYTHON
1.6.1 FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS AS
A RESULT OF MODIFYING, DISTRIBUTING, OR OTHERWISE USING PYTHON 1.6.1,
OR ANY DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.
6. This License Agreement will automatically terminate upon a material
breach of its terms and conditions.
7. This License Agreement shall be governed by the federal
intellectual property law of the United States, including without
limitation the federal copyright law, and, to the extent such
U.S. federal law does not apply, by the law of the Commonwealth of
Virginia, excluding Virginia's conflict of law provisions.
Notwithstanding the foregoing, with regard to derivative works based
on Python 1.6.1 that incorporate non-separable material that was
previously distributed under the GNU General Public License (GPL), the
law of the Commonwealth of Virginia shall govern this License
Agreement only as to issues arising under or with respect to
Paragraphs 4, 5, and 7 of this License Agreement. Nothing in this
License Agreement shall be deemed to create any relationship of
agency, partnership, or joint venture between CNRI and Licensee. This
License Agreement does not grant permission to use CNRI trademarks or
trade name in a trademark sense to endorse or promote products or
services of Licensee, or any third party.
8. By clicking on the "ACCEPT" button where indicated, or by copying,
installing or otherwise using Python 1.6.1, Licensee agrees to be
bound by the terms and conditions of this License Agreement.
ACCEPT
CWI LICENSE AGREEMENT FOR PYTHON 0.9.0 THROUGH 1.2
--------------------------------------------------
Copyright (c) 1991 - 1995, Stichting Mathematisch Centrum Amsterdam,
The Netherlands. All rights reserved.
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Stichting Mathematisch
Centrum or CWI not be used in advertising or publicity pertaining to
distribution of the software without specific, written prior
permission.
STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL WARRANTIES WITH REGARD TO
THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM BE LIABLE
FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

View File

@@ -118,15 +118,6 @@ Please note that g_malloc will exit on allocation failure, so there
is no need to test for failure (as you would have to with malloc).
Calling g_malloc with a zero size is valid and will return NULL.
Prefer g_new(T, n) instead of g_malloc(sizeof(T) * n) for the following
reasons:
a. It catches multiplication overflowing size_t;
b. It returns T * instead of void *, letting compiler catch more type
errors.
Declarations like T *v = g_malloc(sizeof(*v)) are acceptable, though.
Memory allocated by qemu_memalign or qemu_blockalign must be freed with
qemu_vfree, since breaking this will cause problems on Win32.

View File

@@ -1,36 +0,0 @@
# These are "proxy" symbols used to pass config-host.mak values
# down to Kconfig. See also MINIKCONF_ARGS in the Makefile:
# these two need to be kept in sync.
config KVM
bool
config LINUX
bool
config OPENGL
bool
config X11
bool
config SPICE
bool
config IVSHMEM
bool
config TPM
bool
config VHOST_USER
bool
config XEN
bool
config VIRTFS
bool
config PVRDMA
bool

File diff suppressed because it is too large Load Diff

441
Makefile
View File

@@ -20,6 +20,8 @@ ifneq ($(wildcard config-host.mak),)
all:
include config-host.mak
PYTHON_UTF8 = LC_ALL= LANG=C LC_CTYPE=en_US.UTF-8 $(PYTHON)
git-submodule-update:
.PHONY: git-submodule-update
@@ -67,7 +69,7 @@ CONFIG_ALL=y
-include config-all-devices.mak
-include config-all-disas.mak
config-host.mak: $(SRC_PATH)/configure $(SRC_PATH)/pc-bios $(SRC_PATH)/VERSION
config-host.mak: $(SRC_PATH)/configure $(SRC_PATH)/pc-bios
@echo $@ is out-of-date, running configure
@# TODO: The next lines include code which supports a smooth
@# transition from old configurations without config.status.
@@ -87,41 +89,79 @@ endif
include $(SRC_PATH)/rules.mak
# Create QEMU_PKGVERSION and FULL_VERSION strings
# If PKGVERSION is set, use that; otherwise get version and -dirty status from git
QEMU_PKGVERSION := $(if $(PKGVERSION),$(PKGVERSION),$(shell \
cd $(SRC_PATH); \
if test -e .git; then \
git describe --match 'v*' 2>/dev/null | tr -d '\n'; \
if ! git diff-index --quiet HEAD &>/dev/null; then \
echo "-dirty"; \
fi; \
fi))
# Either "version (pkgversion)", or just "version" if pkgversion not set
FULL_VERSION := $(if $(QEMU_PKGVERSION),$(VERSION) ($(QEMU_PKGVERSION)),$(VERSION))
GENERATED_FILES = qemu-version.h config-host.h qemu-options.def
GENERATED_QAPI_FILES = qapi/qapi-builtin-types.h qapi/qapi-builtin-types.c
GENERATED_QAPI_FILES += qapi/qapi-types.h qapi/qapi-types.c
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-types-%.h)
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-types-%.c)
GENERATED_QAPI_FILES += qapi/qapi-builtin-visit.h qapi/qapi-builtin-visit.c
GENERATED_QAPI_FILES += qapi/qapi-visit.h qapi/qapi-visit.c
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-visit-%.h)
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-visit-%.c)
GENERATED_QAPI_FILES += qapi/qapi-commands.h qapi/qapi-commands.c
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-commands-%.h)
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-commands-%.c)
GENERATED_QAPI_FILES += qapi/qapi-emit-events.h qapi/qapi-emit-events.c
GENERATED_QAPI_FILES += qapi/qapi-events.h qapi/qapi-events.c
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-events-%.h)
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-events-%.c)
GENERATED_QAPI_FILES += qapi/qapi-introspect.c qapi/qapi-introspect.h
GENERATED_QAPI_FILES += qapi/qapi-doc.texi
GENERATED_FILES += $(GENERATED_QAPI_FILES)
GENERATED_FILES += qapi/qapi-builtin-types.h qapi/qapi-builtin-types.c
GENERATED_FILES += qapi/qapi-types.h qapi/qapi-types.c
GENERATED_FILES += qapi/qapi-types-block-core.h qapi/qapi-types-block-core.c
GENERATED_FILES += qapi/qapi-types-block.h qapi/qapi-types-block.c
GENERATED_FILES += qapi/qapi-types-char.h qapi/qapi-types-char.c
GENERATED_FILES += qapi/qapi-types-common.h qapi/qapi-types-common.c
GENERATED_FILES += qapi/qapi-types-crypto.h qapi/qapi-types-crypto.c
GENERATED_FILES += qapi/qapi-types-introspect.h qapi/qapi-types-introspect.c
GENERATED_FILES += qapi/qapi-types-migration.h qapi/qapi-types-migration.c
GENERATED_FILES += qapi/qapi-types-misc.h qapi/qapi-types-misc.c
GENERATED_FILES += qapi/qapi-types-net.h qapi/qapi-types-net.c
GENERATED_FILES += qapi/qapi-types-rocker.h qapi/qapi-types-rocker.c
GENERATED_FILES += qapi/qapi-types-run-state.h qapi/qapi-types-run-state.c
GENERATED_FILES += qapi/qapi-types-sockets.h qapi/qapi-types-sockets.c
GENERATED_FILES += qapi/qapi-types-tpm.h qapi/qapi-types-tpm.c
GENERATED_FILES += qapi/qapi-types-trace.h qapi/qapi-types-trace.c
GENERATED_FILES += qapi/qapi-types-transaction.h qapi/qapi-types-transaction.c
GENERATED_FILES += qapi/qapi-types-ui.h qapi/qapi-types-ui.c
GENERATED_FILES += qapi/qapi-builtin-visit.h qapi/qapi-builtin-visit.c
GENERATED_FILES += qapi/qapi-visit.h qapi/qapi-visit.c
GENERATED_FILES += qapi/qapi-visit-block-core.h qapi/qapi-visit-block-core.c
GENERATED_FILES += qapi/qapi-visit-block.h qapi/qapi-visit-block.c
GENERATED_FILES += qapi/qapi-visit-char.h qapi/qapi-visit-char.c
GENERATED_FILES += qapi/qapi-visit-common.h qapi/qapi-visit-common.c
GENERATED_FILES += qapi/qapi-visit-crypto.h qapi/qapi-visit-crypto.c
GENERATED_FILES += qapi/qapi-visit-introspect.h qapi/qapi-visit-introspect.c
GENERATED_FILES += qapi/qapi-visit-migration.h qapi/qapi-visit-migration.c
GENERATED_FILES += qapi/qapi-visit-misc.h qapi/qapi-visit-misc.c
GENERATED_FILES += qapi/qapi-visit-net.h qapi/qapi-visit-net.c
GENERATED_FILES += qapi/qapi-visit-rocker.h qapi/qapi-visit-rocker.c
GENERATED_FILES += qapi/qapi-visit-run-state.h qapi/qapi-visit-run-state.c
GENERATED_FILES += qapi/qapi-visit-sockets.h qapi/qapi-visit-sockets.c
GENERATED_FILES += qapi/qapi-visit-tpm.h qapi/qapi-visit-tpm.c
GENERATED_FILES += qapi/qapi-visit-trace.h qapi/qapi-visit-trace.c
GENERATED_FILES += qapi/qapi-visit-transaction.h qapi/qapi-visit-transaction.c
GENERATED_FILES += qapi/qapi-visit-ui.h qapi/qapi-visit-ui.c
GENERATED_FILES += qapi/qapi-commands.h qapi/qapi-commands.c
GENERATED_FILES += qapi/qapi-commands-block-core.h qapi/qapi-commands-block-core.c
GENERATED_FILES += qapi/qapi-commands-block.h qapi/qapi-commands-block.c
GENERATED_FILES += qapi/qapi-commands-char.h qapi/qapi-commands-char.c
GENERATED_FILES += qapi/qapi-commands-common.h qapi/qapi-commands-common.c
GENERATED_FILES += qapi/qapi-commands-crypto.h qapi/qapi-commands-crypto.c
GENERATED_FILES += qapi/qapi-commands-introspect.h qapi/qapi-commands-introspect.c
GENERATED_FILES += qapi/qapi-commands-migration.h qapi/qapi-commands-migration.c
GENERATED_FILES += qapi/qapi-commands-misc.h qapi/qapi-commands-misc.c
GENERATED_FILES += qapi/qapi-commands-net.h qapi/qapi-commands-net.c
GENERATED_FILES += qapi/qapi-commands-rocker.h qapi/qapi-commands-rocker.c
GENERATED_FILES += qapi/qapi-commands-run-state.h qapi/qapi-commands-run-state.c
GENERATED_FILES += qapi/qapi-commands-sockets.h qapi/qapi-commands-sockets.c
GENERATED_FILES += qapi/qapi-commands-tpm.h qapi/qapi-commands-tpm.c
GENERATED_FILES += qapi/qapi-commands-trace.h qapi/qapi-commands-trace.c
GENERATED_FILES += qapi/qapi-commands-transaction.h qapi/qapi-commands-transaction.c
GENERATED_FILES += qapi/qapi-commands-ui.h qapi/qapi-commands-ui.c
GENERATED_FILES += qapi/qapi-events.h qapi/qapi-events.c
GENERATED_FILES += qapi/qapi-events-block-core.h qapi/qapi-events-block-core.c
GENERATED_FILES += qapi/qapi-events-block.h qapi/qapi-events-block.c
GENERATED_FILES += qapi/qapi-events-char.h qapi/qapi-events-char.c
GENERATED_FILES += qapi/qapi-events-common.h qapi/qapi-events-common.c
GENERATED_FILES += qapi/qapi-events-crypto.h qapi/qapi-events-crypto.c
GENERATED_FILES += qapi/qapi-events-introspect.h qapi/qapi-events-introspect.c
GENERATED_FILES += qapi/qapi-events-migration.h qapi/qapi-events-migration.c
GENERATED_FILES += qapi/qapi-events-misc.h qapi/qapi-events-misc.c
GENERATED_FILES += qapi/qapi-events-net.h qapi/qapi-events-net.c
GENERATED_FILES += qapi/qapi-events-rocker.h qapi/qapi-events-rocker.c
GENERATED_FILES += qapi/qapi-events-run-state.h qapi/qapi-events-run-state.c
GENERATED_FILES += qapi/qapi-events-sockets.h qapi/qapi-events-sockets.c
GENERATED_FILES += qapi/qapi-events-tpm.h qapi/qapi-events-tpm.c
GENERATED_FILES += qapi/qapi-events-trace.h qapi/qapi-events-trace.c
GENERATED_FILES += qapi/qapi-events-transaction.h qapi/qapi-events-transaction.c
GENERATED_FILES += qapi/qapi-events-ui.h qapi/qapi-events-ui.c
GENERATED_FILES += qapi/qapi-introspect.c qapi/qapi-introspect.h
GENERATED_FILES += qapi/qapi-doc.texi
GENERATED_FILES += trace/generated-tcg-tracers.h
@@ -159,7 +199,7 @@ tracetool-y += $(shell find $(SRC_PATH)/scripts/tracetool -name "*.py")
%/trace.h: %/trace.h-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
%/trace.h-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y) $(BUILD_DIR)/config-host.mak
%/trace.h-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=$(call trace-group-name,$@) \
--format=h \
@@ -168,7 +208,7 @@ tracetool-y += $(shell find $(SRC_PATH)/scripts/tracetool -name "*.py")
%/trace.c: %/trace.c-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
%/trace.c-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y) $(BUILD_DIR)/config-host.mak
%/trace.c-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=$(call trace-group-name,$@) \
--format=c \
@@ -177,7 +217,7 @@ tracetool-y += $(shell find $(SRC_PATH)/scripts/tracetool -name "*.py")
%/trace-ust.h: %/trace-ust.h-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
%/trace-ust.h-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y) $(BUILD_DIR)/config-host.mak
%/trace-ust.h-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=$(call trace-group-name,$@) \
--format=ust-events-h \
@@ -201,7 +241,7 @@ tracetool-y += $(shell find $(SRC_PATH)/scripts/tracetool -name "*.py")
trace-root.h: trace-root.h-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-root.h-timestamp: $(SRC_PATH)/trace-events $(tracetool-y) $(BUILD_DIR)/config-host.mak
trace-root.h-timestamp: $(SRC_PATH)/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=root \
--format=h \
@@ -210,7 +250,7 @@ trace-root.h-timestamp: $(SRC_PATH)/trace-events $(tracetool-y) $(BUILD_DIR)/con
trace-root.c: trace-root.c-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-root.c-timestamp: $(SRC_PATH)/trace-events $(tracetool-y) $(BUILD_DIR)/config-host.mak
trace-root.c-timestamp: $(SRC_PATH)/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=root \
--format=c \
@@ -219,7 +259,7 @@ trace-root.c-timestamp: $(SRC_PATH)/trace-events $(tracetool-y) $(BUILD_DIR)/con
trace-ust-root.h: trace-ust-root.h-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-ust-root.h-timestamp: $(SRC_PATH)/trace-events $(tracetool-y) $(BUILD_DIR)/config-host.mak
trace-ust-root.h-timestamp: $(SRC_PATH)/trace-events $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=root \
--format=ust-events-h \
@@ -228,7 +268,7 @@ trace-ust-root.h-timestamp: $(SRC_PATH)/trace-events $(tracetool-y) $(BUILD_DIR)
trace-ust-all.h: trace-ust-all.h-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-ust-all.h-timestamp: $(trace-events-files) $(tracetool-y) $(BUILD_DIR)/config-host.mak
trace-ust-all.h-timestamp: $(trace-events-files) $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=ust-events-h \
@@ -237,7 +277,7 @@ trace-ust-all.h-timestamp: $(trace-events-files) $(tracetool-y) $(BUILD_DIR)/con
trace-ust-all.c: trace-ust-all.c-timestamp
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
trace-ust-all.c-timestamp: $(trace-events-files) $(tracetool-y) $(BUILD_DIR)/config-host.mak
trace-ust-all.c-timestamp: $(trace-events-files) $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=ust-events-c \
@@ -278,7 +318,6 @@ KEYCODEMAP_FILES = \
ui/input-keymap-xorgkbd-to-qcode.c \
ui/input-keymap-xorgxquartz-to-qcode.c \
ui/input-keymap-xorgxwin-to-qcode.c \
ui/input-keymap-osx-to-qcode.c \
$(NULL)
GENERATED_FILES += $(KEYCODEMAP_FILES)
@@ -308,33 +347,29 @@ $(call set-vpath, $(SRC_PATH))
LIBS+=-lz $(LIBS_TOOLS)
HELPERS-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_LINUX)) = qemu-bridge-helper$(EXESUF)
HELPERS-$(CONFIG_LINUX) = qemu-bridge-helper$(EXESUF)
ifdef BUILD_DOCS
DOCS=qemu-doc.html qemu-doc.txt qemu.1 qemu-img.1 qemu-nbd.8 qemu-ga.8
DOCS+=docs/interop/qemu-qmp-ref.html docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7
DOCS+=docs/interop/qemu-ga-ref.html docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7
DOCS+=docs/qemu-block-drivers.7
DOCS+=docs/qemu-cpu-models.7
ifdef CONFIG_VIRTFS
DOCS+=fsdev/virtfs-proxy-helper.1
endif
ifdef CONFIG_TRACE_SYSTEMTAP
DOCS+=scripts/qemu-trace-stap.1
endif
else
DOCS=
endif
SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory --quiet) BUILD_DIR=$(BUILD_DIR)
SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(filter %-softmmu, $(TARGET_DIRS)))
SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %.d, $(SUBDIR_DEVICES_MAK))
SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %-config-devices.mak.d, $(TARGET_DIRS))
ifeq ($(SUBDIR_DEVICES_MAK),)
config-all-devices.mak: config-host.mak
config-all-devices.mak:
$(call quiet-command,echo '# no devices' > $@,"GEN","$@")
else
config-all-devices.mak: $(SUBDIR_DEVICES_MAK) config-host.mak
config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
$(call quiet-command, sed -n \
's|^\([^=]*\)=\(.*\)$$|\1:=$$(findstring y,$$(\1)\2)|p' \
$(SUBDIR_DEVICES_MAK) | sort -u > $@, \
@@ -343,27 +378,9 @@ endif
-include $(SUBDIR_DEVICES_MAK_DEP)
# This has to be kept in sync with Kconfig.host.
MINIKCONF_ARGS = \
$(CONFIG_MINIKCONF_MODE) \
$@ $*-config.devices.mak.d $< $(MINIKCONF_INPUTS) \
CONFIG_KVM=$(CONFIG_KVM) \
CONFIG_SPICE=$(CONFIG_SPICE) \
CONFIG_IVSHMEM=$(CONFIG_IVSHMEM) \
CONFIG_TPM=$(CONFIG_TPM) \
CONFIG_XEN=$(CONFIG_XEN) \
CONFIG_OPENGL=$(CONFIG_OPENGL) \
CONFIG_X11=$(CONFIG_X11) \
CONFIG_VHOST_USER=$(CONFIG_VHOST_USER) \
CONFIG_VIRTFS=$(CONFIG_VIRTFS) \
CONFIG_LINUX=$(CONFIG_LINUX) \
CONFIG_PVRDMA=$(CONFIG_PVRDMA)
MINIKCONF_INPUTS = $(SRC_PATH)/Kconfig.host $(SRC_PATH)/hw/Kconfig
MINIKCONF = $(PYTHON) $(SRC_PATH)/scripts/minikconf.py \
$(SUBDIR_DEVICES_MAK): %/config-devices.mak: default-configs/%.mak $(MINIKCONF_INPUTS) $(BUILD_DIR)/config-host.mak
$(call quiet-command, $(MINIKCONF) $(MINIKCONF_ARGS) > $@.tmp, "GEN", "$@.tmp")
%/config-devices.mak: default-configs/%.mak $(SRC_PATH)/scripts/make_device_config.sh
$(call quiet-command, \
$(SHELL) $(SRC_PATH)/scripts/make_device_config.sh $< $*-config-devices.mak.d $@ > $@.tmp,"GEN","$@.tmp")
$(call quiet-command, if test -f $@; then \
if cmp -s $@.old $@; then \
mv $@.tmp $@; \
@@ -391,14 +408,11 @@ endif
dummy := $(call unnest-vars,, \
stub-obj-y \
authz-obj-y \
chardev-obj-y \
util-obj-y \
qga-obj-y \
elf2dmp-obj-y \
ivshmem-client-obj-y \
ivshmem-server-obj-y \
rdmacm-mux-obj-y \
libvhost-user-obj-y \
vhost-user-scsi-obj-y \
vhost-user-blk-obj-y \
@@ -419,12 +433,27 @@ dummy := $(call unnest-vars,, \
include $(SRC_PATH)/tests/Makefile.include
all: $(DOCS) $(if $(BUILD_DOCS),sphinxdocs) $(TOOLS) $(HELPERS-y) recurse-all modules
all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all modules
qemu-version.h: FORCE
$(call quiet-command, \
(printf '#define QEMU_PKGVERSION "$(QEMU_PKGVERSION)"\n'; \
printf '#define QEMU_FULL_VERSION "$(FULL_VERSION)"\n'; \
(cd $(SRC_PATH); \
if test -n "$(PKGVERSION)"; then \
pkgvers="$(PKGVERSION)"; \
else \
if test -d .git; then \
pkgvers=$$(git describe --match 'v*' 2>/dev/null | tr -d '\n');\
if ! git diff-index --quiet HEAD &>/dev/null; then \
pkgvers="$${pkgvers}-dirty"; \
fi; \
fi; \
fi; \
printf "#define QEMU_PKGVERSION \"$${pkgvers}\"\n"; \
if test -n "$${pkgvers}"; then \
printf '#define QEMU_FULL_VERSION QEMU_VERSION " (" QEMU_PKGVERSION ")"\n'; \
else \
printf '#define QEMU_FULL_VERSION QEMU_VERSION\n'; \
fi; \
) > $@.tmp)
$(call quiet-command, if ! cmp -s $@ $@.tmp; then \
mv $@.tmp $@; \
@@ -440,7 +469,6 @@ qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES))
$(SOFTMMU_SUBDIR_RULES): $(authz-obj-y)
$(SOFTMMU_SUBDIR_RULES): $(block-obj-y)
$(SOFTMMU_SUBDIR_RULES): $(crypto-obj-y)
$(SOFTMMU_SUBDIR_RULES): $(io-obj-y)
@@ -457,7 +485,7 @@ subdir-dtc: .git-submodule-status dtc/libfdt dtc/tests
$(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt/libfdt.a,)
dtc/%: .git-submodule-status
@mkdir -p $@
mkdir -p $@
# Overriding CFLAGS causes us to lose defines added in the sub-makefile.
# Not overriding CFLAGS leads to mis-matches between compilation modes.
@@ -474,9 +502,6 @@ CAP_CFLAGS += -DCAPSTONE_HAS_X86
subdir-capstone: .git-submodule-status
$(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
subdir-slirp: .git-submodule-status
$(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp BUILD_DIR="$(BUILD_DIR)/slirp" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(QEMU_CFLAGS)")
$(SUBDIR_RULES): libqemuutil.a $(common-obj-y) $(chardev-obj-y) \
$(qom-obj-y) $(crypto-aes-obj-$(CONFIG_USER_ONLY))
@@ -498,7 +523,7 @@ Makefile: $(version-obj-y)
# Build libraries
libqemuutil.a: $(util-obj-y) $(trace-obj-y) $(stub-obj-y)
libvhost-user.a: $(libvhost-user-obj-y) $(util-obj-y) $(stub-obj-y)
libvhost-user.a: $(libvhost-user-obj-y)
######################################################################
@@ -506,20 +531,18 @@ COMMON_LDADDS = libqemuutil.a
qemu-img.o: qemu-img-cmds.h
qemu-img$(EXESUF): qemu-img.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
qemu-nbd$(EXESUF): qemu-nbd.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
qemu-io$(EXESUF): qemu-io.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
qemu-img$(EXESUF): qemu-img.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
qemu-io$(EXESUF): qemu-io.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o $(COMMON_LDADDS)
qemu-keymap$(EXESUF): qemu-keymap.o ui/input-keymap.o $(COMMON_LDADDS)
qemu-edid$(EXESUF): qemu-edid.o hw/display/edid-generate.o $(COMMON_LDADDS)
fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/9p-marshal.o fsdev/9p-iov-marshal.o $(COMMON_LDADDS)
fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap
scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(authz-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
ifdef CONFIG_MPATH
scsi/qemu-pr-helper$(EXESUF): LIBS += -ludev -lmultipath -lmpathpersist
endif
@@ -540,6 +563,7 @@ $(SRC_PATH)/scripts/qapi/types.py \
$(SRC_PATH)/scripts/qapi/visit.py \
$(SRC_PATH)/scripts/qapi/common.py \
$(SRC_PATH)/scripts/qapi/doc.py \
$(SRC_PATH)/scripts/ordereddict.py \
$(SRC_PATH)/scripts/qapi-gen.py
qga/qapi-generated/qga-qapi-types.c qga/qapi-generated/qga-qapi-types.h \
@@ -548,17 +572,102 @@ qga/qapi-generated/qga-qapi-commands.h qga/qapi-generated/qga-qapi-commands.c \
qga/qapi-generated/qga-qapi-doc.texi: \
qga/qapi-generated/qapi-gen-timestamp ;
qga/qapi-generated/qapi-gen-timestamp: $(SRC_PATH)/qga/qapi-schema.json $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-gen.py \
$(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi-gen.py \
-o qga/qapi-generated -p "qga-" $<, \
"GEN","$(@:%-timestamp=%)")
@>$@
qapi-modules = $(SRC_PATH)/qapi/qapi-schema.json \
$(QAPI_MODULES:%=$(SRC_PATH)/qapi/%.json)
qapi-modules = $(SRC_PATH)/qapi/qapi-schema.json $(SRC_PATH)/qapi/common.json \
$(SRC_PATH)/qapi/block.json $(SRC_PATH)/qapi/block-core.json \
$(SRC_PATH)/qapi/char.json \
$(SRC_PATH)/qapi/crypto.json \
$(SRC_PATH)/qapi/introspect.json \
$(SRC_PATH)/qapi/migration.json \
$(SRC_PATH)/qapi/misc.json \
$(SRC_PATH)/qapi/net.json \
$(SRC_PATH)/qapi/rocker.json \
$(SRC_PATH)/qapi/run-state.json \
$(SRC_PATH)/qapi/sockets.json \
$(SRC_PATH)/qapi/tpm.json \
$(SRC_PATH)/qapi/trace.json \
$(SRC_PATH)/qapi/transaction.json \
$(SRC_PATH)/qapi/ui.json
$(GENERATED_QAPI_FILES): qapi-gen-timestamp ;
qapi/qapi-builtin-types.c qapi/qapi-builtin-types.h \
qapi/qapi-types.c qapi/qapi-types.h \
qapi/qapi-types-block-core.c qapi/qapi-types-block-core.h \
qapi/qapi-types-block.c qapi/qapi-types-block.h \
qapi/qapi-types-char.c qapi/qapi-types-char.h \
qapi/qapi-types-common.c qapi/qapi-types-common.h \
qapi/qapi-types-crypto.c qapi/qapi-types-crypto.h \
qapi/qapi-types-introspect.c qapi/qapi-types-introspect.h \
qapi/qapi-types-migration.c qapi/qapi-types-migration.h \
qapi/qapi-types-misc.c qapi/qapi-types-misc.h \
qapi/qapi-types-net.c qapi/qapi-types-net.h \
qapi/qapi-types-rocker.c qapi/qapi-types-rocker.h \
qapi/qapi-types-run-state.c qapi/qapi-types-run-state.h \
qapi/qapi-types-sockets.c qapi/qapi-types-sockets.h \
qapi/qapi-types-tpm.c qapi/qapi-types-tpm.h \
qapi/qapi-types-trace.c qapi/qapi-types-trace.h \
qapi/qapi-types-transaction.c qapi/qapi-types-transaction.h \
qapi/qapi-types-ui.c qapi/qapi-types-ui.h \
qapi/qapi-builtin-visit.c qapi/qapi-builtin-visit.h \
qapi/qapi-visit.c qapi/qapi-visit.h \
qapi/qapi-visit-block-core.c qapi/qapi-visit-block-core.h \
qapi/qapi-visit-block.c qapi/qapi-visit-block.h \
qapi/qapi-visit-char.c qapi/qapi-visit-char.h \
qapi/qapi-visit-common.c qapi/qapi-visit-common.h \
qapi/qapi-visit-crypto.c qapi/qapi-visit-crypto.h \
qapi/qapi-visit-introspect.c qapi/qapi-visit-introspect.h \
qapi/qapi-visit-migration.c qapi/qapi-visit-migration.h \
qapi/qapi-visit-misc.c qapi/qapi-visit-misc.h \
qapi/qapi-visit-net.c qapi/qapi-visit-net.h \
qapi/qapi-visit-rocker.c qapi/qapi-visit-rocker.h \
qapi/qapi-visit-run-state.c qapi/qapi-visit-run-state.h \
qapi/qapi-visit-sockets.c qapi/qapi-visit-sockets.h \
qapi/qapi-visit-tpm.c qapi/qapi-visit-tpm.h \
qapi/qapi-visit-trace.c qapi/qapi-visit-trace.h \
qapi/qapi-visit-transaction.c qapi/qapi-visit-transaction.h \
qapi/qapi-visit-ui.c qapi/qapi-visit-ui.h \
qapi/qapi-commands.h qapi/qapi-commands.c \
qapi/qapi-commands-block-core.c qapi/qapi-commands-block-core.h \
qapi/qapi-commands-block.c qapi/qapi-commands-block.h \
qapi/qapi-commands-char.c qapi/qapi-commands-char.h \
qapi/qapi-commands-common.c qapi/qapi-commands-common.h \
qapi/qapi-commands-crypto.c qapi/qapi-commands-crypto.h \
qapi/qapi-commands-introspect.c qapi/qapi-commands-introspect.h \
qapi/qapi-commands-migration.c qapi/qapi-commands-migration.h \
qapi/qapi-commands-misc.c qapi/qapi-commands-misc.h \
qapi/qapi-commands-net.c qapi/qapi-commands-net.h \
qapi/qapi-commands-rocker.c qapi/qapi-commands-rocker.h \
qapi/qapi-commands-run-state.c qapi/qapi-commands-run-state.h \
qapi/qapi-commands-sockets.c qapi/qapi-commands-sockets.h \
qapi/qapi-commands-tpm.c qapi/qapi-commands-tpm.h \
qapi/qapi-commands-trace.c qapi/qapi-commands-trace.h \
qapi/qapi-commands-transaction.c qapi/qapi-commands-transaction.h \
qapi/qapi-commands-ui.c qapi/qapi-commands-ui.h \
qapi/qapi-events.c qapi/qapi-events.h \
qapi/qapi-events-block-core.c qapi/qapi-events-block-core.h \
qapi/qapi-events-block.c qapi/qapi-events-block.h \
qapi/qapi-events-char.c qapi/qapi-events-char.h \
qapi/qapi-events-common.c qapi/qapi-events-common.h \
qapi/qapi-events-crypto.c qapi/qapi-events-crypto.h \
qapi/qapi-events-introspect.c qapi/qapi-events-introspect.h \
qapi/qapi-events-migration.c qapi/qapi-events-migration.h \
qapi/qapi-events-misc.c qapi/qapi-events-misc.h \
qapi/qapi-events-net.c qapi/qapi-events-net.h \
qapi/qapi-events-rocker.c qapi/qapi-events-rocker.h \
qapi/qapi-events-run-state.c qapi/qapi-events-run-state.h \
qapi/qapi-events-sockets.c qapi/qapi-events-sockets.h \
qapi/qapi-events-tpm.c qapi/qapi-events-tpm.h \
qapi/qapi-events-trace.c qapi/qapi-events-trace.h \
qapi/qapi-events-transaction.c qapi/qapi-events-transaction.h \
qapi/qapi-events-ui.c qapi/qapi-events-ui.h \
qapi/qapi-introspect.h qapi/qapi-introspect.c \
qapi/qapi-doc.texi: \
qapi-gen-timestamp ;
qapi-gen-timestamp: $(qapi-modules) $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-gen.py \
$(call quiet-command,$(PYTHON_UTF8) $(SRC_PATH)/scripts/qapi-gen.py \
-o "qapi" -b $<, \
"GEN","$(@:%-timestamp=%)")
@>$@
@@ -591,10 +700,6 @@ ifneq ($(EXESUF),)
qemu-ga: qemu-ga$(EXESUF) $(QGA_VSS_PROVIDER) $(QEMU_GA_MSI)
endif
elf2dmp$(EXESUF): LIBS += $(CURL_LIBS)
elf2dmp$(EXESUF): $(elf2dmp-obj-y)
$(call LINK, $^)
ifdef CONFIG_IVSHMEM
ivshmem-client$(EXESUF): $(ivshmem-client-obj-y) $(COMMON_LDADDS)
$(call LINK, $^)
@@ -606,33 +711,17 @@ vhost-user-scsi$(EXESUF): $(vhost-user-scsi-obj-y) libvhost-user.a
vhost-user-blk$(EXESUF): $(vhost-user-blk-obj-y) libvhost-user.a
$(call LINK, $^)
rdmacm-mux$(EXESUF): LIBS += "-libumad"
rdmacm-mux$(EXESUF): $(rdmacm-mux-obj-y) $(COMMON_LDADDS)
$(call LINK, $^)
module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak
$(call quiet-command,$(PYTHON) $< $@ \
$(addprefix $(SRC_PATH)/,$(patsubst %.mo,%.c,$(block-obj-m))), \
"GEN","$@")
ifdef CONFIG_GCOV
.PHONY: clean-coverage
clean-coverage:
$(call quiet-command, \
find . \( -name '*.gcda' -o -name '*.gcov' \) -type f -exec rm {} +, \
"CLEAN", "coverage files")
endif
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f qemu-options.def
rm -f *.msi
find . \( -name '*.so' -o -name '*.dll' -o -name '*.mo' -o -name '*.[oda]' \) -type f \
! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-aarch64.a \
! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-arm.a \
! -path ./roms/edk2/BaseTools/Source/Python/UPT/Dll/sqlite3.dll \
-exec rm {} +
find . \( -name '*.so' -o -name '*.dll' -o -name '*.mo' -o -name '*.[oda]' \) -type f -exec rm {} +
rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) qemu-ga TAGS cscope.* *.pod *~ */*~
rm -f fsdev/*.pod scsi/*.pod
rm -f qemu-img-cmds.h
@@ -647,7 +736,7 @@ clean:
if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
rm -f $$d/qemu-options.def; \
done
rm -f config-all-devices.mak
rm -f $(SUBDIR_DEVICES_MAK) config-all-devices.mak
VERSION ?= $(shell cat VERSION)
@@ -656,26 +745,9 @@ dist: qemu-$(VERSION).tar.bz2
qemu-%.tar.bz2:
$(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)"
# Sphinx does not allow building manuals into the same directory as
# the source files, so if we're doing an in-tree QEMU build we must
# build the manuals into a subdirectory (and then install them from
# there for 'make install'). For an out-of-tree build we can just
# use the docs/ subdirectory in the build tree as normal.
ifeq ($(realpath $(SRC_PATH)),$(realpath .))
MANUAL_BUILDDIR := docs/built
else
MANUAL_BUILDDIR := docs
endif
define clean-manual =
rm -rf $(MANUAL_BUILDDIR)/$1/_static
rm -f $(MANUAL_BUILDDIR)/$1/objects.inv $(MANUAL_BUILDDIR)/$1/searchindex.js $(MANUAL_BUILDDIR)/$1/*.html
endef
distclean: clean
rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi qemu-monitor-info.texi
rm -f config-all-devices.mak config-all-disas.mak config.status
rm -f $(SUBDIR_DEVICES_MAK)
rm -f po/*.mo tests/qemu-iotests/common.env
rm -f roms/seabios/config.mak roms/vgabios/config.mak
rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.cps
@@ -691,33 +763,29 @@ distclean: clean
rm -f docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
rm -f docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html
rm -f docs/qemu-block-drivers.7
rm -f docs/qemu-cpu-models.7
rm -rf .doctrees
$(call clean-manual,devel)
$(call clean-manual,interop)
for d in $(TARGET_DIRS); do \
rm -rf $$d || exit 1 ; \
done
rm -Rf .sdk
if test -f dtc/version_gen.h; then $(MAKE) $(DTC_MAKE_ARGS) clean; fi
KEYMAPS=da en-gb et fr fr-ch is lt no pt-br sv \
KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \
ar de en-us fi fr-be hr it lv nl pl ru th \
de-ch es fo fr-ca hu ja mk pt sl tr \
common de-ch es fo fr-ca hu ja mk nl-be pt sl tr \
bepo cz
ifdef INSTALL_BLOBS
BLOBS=bios.bin bios-256k.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin vgabios-virtio.bin \
vgabios-ramfb.bin vgabios-bochs-display.bin \
ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \
pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
efi-e1000e.rom efi-vmxnet3.rom \
qemu-icon.bmp qemu_logo_no_text.svg \
bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin pvh.bin \
multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin \
s390-ccw.img s390-netboot.img \
spapr-rtas.bin slof.bin skiboot.lid \
palcode-clipper \
@@ -728,20 +796,7 @@ else
BLOBS=
endif
# Note that we manually filter-out the non-Sphinx documentation which
# is currently built into the docs/interop directory in the build tree.
define install-manual =
for d in $$(cd $(MANUAL_BUILDDIR) && find $1 -type d); do $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/$$d"; done
for f in $$(cd $(MANUAL_BUILDDIR) && find $1 -type f -a '!' '(' -name 'qemu-*-qapi.*' -o -name 'qemu-*-ref.*' ')' ); do $(INSTALL_DATA) "$(MANUAL_BUILDDIR)/$$f" "$(DESTDIR)$(qemu_docdir)/$$f"; done
endef
# Note that we deliberately do not install the "devel" manual: it is
# for QEMU developers, and not interesting to our users.
.PHONY: install-sphinxdocs
install-sphinxdocs: sphinxdocs
$(call install-manual,interop)
install-doc: $(DOCS) install-sphinxdocs
install-doc: $(DOCS)
$(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)"
$(INSTALL_DATA) qemu-doc.html "$(DESTDIR)$(qemu_docdir)"
$(INSTALL_DATA) qemu-doc.txt "$(DESTDIR)$(qemu_docdir)"
@@ -753,15 +808,11 @@ ifdef CONFIG_POSIX
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man7"
$(INSTALL_DATA) docs/interop/qemu-qmp-ref.7 "$(DESTDIR)$(mandir)/man7"
$(INSTALL_DATA) docs/qemu-block-drivers.7 "$(DESTDIR)$(mandir)/man7"
$(INSTALL_DATA) docs/qemu-cpu-models.7 "$(DESTDIR)$(mandir)/man7"
ifneq ($(TOOLS),)
$(INSTALL_DATA) qemu-img.1 "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DATA) scripts/qemu-trace-stap.1 "$(DESTDIR)$(mandir)/man1"
endif
ifneq (,$(findstring qemu-ga,$(TOOLS)))
$(INSTALL_DATA) qemu-ga.8 "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) docs/interop/qemu-ga-ref.html "$(DESTDIR)$(qemu_docdir)"
@@ -784,7 +835,6 @@ ifneq (,$(findstring qemu-ga,$(TOOLS)))
endif
endif
ICON_SIZES=16x16 24x24 32x32 48x48 64x64 128x128 256x256 512x512
install: all $(if $(BUILD_DOCS),install-doc) install-datadir install-localstatedir
ifneq ($(TOOLS),)
@@ -801,28 +851,11 @@ endif
ifneq ($(HELPERS-y),)
$(call install-prog,$(HELPERS-y),$(DESTDIR)$(libexecdir))
endif
ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_PROG) "scripts/qemu-trace-stap" $(DESTDIR)$(bindir)
endif
ifneq ($(BLOBS),)
set -e; for x in $(BLOBS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \
done
endif
for s in $(ICON_SIZES); do \
mkdir -p "$(DESTDIR)/$(qemu_icondir)/hicolor/$${s}/apps"; \
$(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu_$${s}.png \
"$(DESTDIR)/$(qemu_icondir)/hicolor/$${s}/apps/qemu.png"; \
done; \
mkdir -p "$(DESTDIR)/$(qemu_icondir)/hicolor/32x32/apps"; \
$(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu_32x32.bmp \
"$(DESTDIR)/$(qemu_icondir)/hicolor/32x32/apps/qemu.bmp"; \
mkdir -p "$(DESTDIR)/$(qemu_icondir)/hicolor/scalable/apps"; \
$(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu.svg \
"$(DESTDIR)/$(qemu_icondir)/hicolor/scalable/apps/qemu.svg"
mkdir -p "$(DESTDIR)/$(qemu_desktopdir)"
$(INSTALL_DATA) $(SRC_PATH)/ui/qemu.desktop \
"$(DESTDIR)/$(qemu_desktopdir)/qemu.desktop"
ifdef CONFIG_GTK
$(MAKE) -C po $@
endif
@@ -892,23 +925,6 @@ docs/version.texi: $(SRC_PATH)/VERSION
%.pdf: %.texi docs/version.texi
$(call quiet-command,texi2pdf $(TEXI2PDFFLAGS) $< -o $@,"GEN","$@")
# Sphinx builds all its documentation at once in one invocation
# and handles "don't rebuild things unless necessary" itself.
# The '.doctrees' files are cached information to speed this up.
.PHONY: sphinxdocs
sphinxdocs: $(MANUAL_BUILDDIR)/devel/index.html $(MANUAL_BUILDDIR)/interop/index.html
# Canned command to build a single manual
build-manual = $(call quiet-command,sphinx-build $(if $(V),,-q) -b html -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1")
# We assume all RST files in the manual's directory are used in it
manual-deps = $(wildcard $(SRC_PATH)/docs/$1/*.rst) $(SRC_PATH)/docs/$1/conf.py $(SRC_PATH)/docs/conf.py
$(MANUAL_BUILDDIR)/devel/index.html: $(call manual-deps,devel)
$(call build-manual,devel)
$(MANUAL_BUILDDIR)/interop/index.html: $(call manual-deps,interop)
$(call build-manual,interop)
qemu-options.texi: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
@@ -934,19 +950,16 @@ fsdev/virtfs-proxy-helper.1: fsdev/virtfs-proxy-helper.texi
qemu-nbd.8: qemu-nbd.texi qemu-option-trace.texi
qemu-ga.8: qemu-ga.texi
docs/qemu-block-drivers.7: docs/qemu-block-drivers.texi
docs/qemu-cpu-models.7: docs/qemu-cpu-models.texi
scripts/qemu-trace-stap.1: scripts/qemu-trace-stap.texi
html: qemu-doc.html docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html sphinxdocs
html: qemu-doc.html docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html
info: qemu-doc.info docs/interop/qemu-qmp-ref.info docs/interop/qemu-ga-ref.info
pdf: qemu-doc.pdf docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
txt: qemu-doc.txt docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
qemu-doc.html qemu-doc.info qemu-doc.pdf qemu-doc.txt: \
qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-option-trace.texi \
qemu-deprecated.texi qemu-monitor.texi qemu-img-cmds.texi qemu-ga.texi \
qemu-monitor-info.texi docs/qemu-block-drivers.texi \
docs/qemu-cpu-models.texi
qemu-monitor.texi qemu-img-cmds.texi qemu-ga.texi \
qemu-monitor-info.texi docs/qemu-block-drivers.texi
docs/interop/qemu-ga-ref.dvi docs/interop/qemu-ga-ref.html \
docs/interop/qemu-ga-ref.info docs/interop/qemu-ga-ref.pdf \
@@ -958,19 +971,6 @@ docs/interop/qemu-qmp-ref.dvi docs/interop/qemu-qmp-ref.html \
docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7: \
docs/interop/qemu-qmp-ref.texi docs/interop/qemu-qmp-qapi.texi
$(filter %.1 %.7 %.8,$(DOCS)): scripts/texi2pod.pl
# Reports/Analysis
%/coverage-report.html:
@mkdir -p $*
$(call quiet-command,\
gcovr -r $(SRC_PATH) --object-directory $(BUILD_PATH) \
-p --html --html-details -o $@, \
"GEN", "coverage-report.html")
.PHONY: coverage-report
coverage-report: $(CURDIR)/reports/coverage/coverage-report.html
ifdef CONFIG_WIN32
@@ -1047,6 +1047,9 @@ endif
include $(SRC_PATH)/tests/docker/Makefile.include
include $(SRC_PATH)/tests/vm/Makefile.include
printgen:
@echo $(GENERATED_FILES)
.PHONY: help
help:
@echo 'Generic targets:'
@@ -1066,9 +1069,6 @@ endif
echo '')
@echo 'Cleaning targets:'
@echo ' clean - Remove most generated files but keep the config'
ifdef CONFIG_GCOV
@echo ' clean-coverage - Remove coverage files'
endif
@echo ' distclean - Remove all generated files'
@echo ' dist - Build a distributable tarball'
@echo ''
@@ -1080,9 +1080,6 @@ endif
@echo 'Documentation targets:'
@echo ' html info pdf txt'
@echo ' - Build documentation in specified format'
ifdef CONFIG_GCOV
@echo ' coverage-report - Create code coverage report'
endif
@echo ''
ifdef CONFIG_WIN32
@echo 'Windows targets:'

View File

@@ -1,20 +1,69 @@
#######################################################################
# Common libraries for tools and emulators
stub-obj-y = stubs/ util/ crypto/
stub-obj-y = stubs/ crypto/
util-obj-y = util/ qobject/ qapi/
util-obj-y += qapi/qapi-builtin-types.o
util-obj-y += qapi/qapi-types.o
util-obj-y += qapi/qapi-types-block-core.o
util-obj-y += qapi/qapi-types-block.o
util-obj-y += qapi/qapi-types-char.o
util-obj-y += qapi/qapi-types-common.o
util-obj-y += qapi/qapi-types-crypto.o
util-obj-y += qapi/qapi-types-introspect.o
util-obj-y += qapi/qapi-types-migration.o
util-obj-y += qapi/qapi-types-misc.o
util-obj-y += qapi/qapi-types-net.o
util-obj-y += qapi/qapi-types-rocker.o
util-obj-y += qapi/qapi-types-run-state.o
util-obj-y += qapi/qapi-types-sockets.o
util-obj-y += qapi/qapi-types-tpm.o
util-obj-y += qapi/qapi-types-trace.o
util-obj-y += qapi/qapi-types-transaction.o
util-obj-y += qapi/qapi-types-ui.o
util-obj-y += qapi/qapi-builtin-visit.o
util-obj-y += qapi/qapi-visit.o
util-obj-y += qapi/qapi-visit-block-core.o
util-obj-y += qapi/qapi-visit-block.o
util-obj-y += qapi/qapi-visit-char.o
util-obj-y += qapi/qapi-visit-common.o
util-obj-y += qapi/qapi-visit-crypto.o
util-obj-y += qapi/qapi-visit-introspect.o
util-obj-y += qapi/qapi-visit-migration.o
util-obj-y += qapi/qapi-visit-misc.o
util-obj-y += qapi/qapi-visit-net.o
util-obj-y += qapi/qapi-visit-rocker.o
util-obj-y += qapi/qapi-visit-run-state.o
util-obj-y += qapi/qapi-visit-sockets.o
util-obj-y += qapi/qapi-visit-tpm.o
util-obj-y += qapi/qapi-visit-trace.o
util-obj-y += qapi/qapi-visit-transaction.o
util-obj-y += qapi/qapi-visit-ui.o
util-obj-y += qapi/qapi-events.o
util-obj-y += qapi/qapi-events-block-core.o
util-obj-y += qapi/qapi-events-block.o
util-obj-y += qapi/qapi-events-char.o
util-obj-y += qapi/qapi-events-common.o
util-obj-y += qapi/qapi-events-crypto.o
util-obj-y += qapi/qapi-events-introspect.o
util-obj-y += qapi/qapi-events-migration.o
util-obj-y += qapi/qapi-events-misc.o
util-obj-y += qapi/qapi-events-net.o
util-obj-y += qapi/qapi-events-rocker.o
util-obj-y += qapi/qapi-events-run-state.o
util-obj-y += qapi/qapi-events-sockets.o
util-obj-y += qapi/qapi-events-tpm.o
util-obj-y += qapi/qapi-events-trace.o
util-obj-y += qapi/qapi-events-transaction.o
util-obj-y += qapi/qapi-events-ui.o
util-obj-y += qapi/qapi-introspect.o
chardev-obj-y = chardev/
#######################################################################
# authz-obj-y is code used by both qemu system emulation and qemu-img
authz-obj-y = authz/
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y = nbd/
block-obj-y += block.o blockjob.o job.o
block-obj-y += nbd/
block-obj-y += block.o blockjob.o
block-obj-y += block/ scsi/
block-obj-y += qemu-io-cmds.o
block-obj-$(CONFIG_REPLICATION) += replication.o
@@ -45,7 +94,6 @@ io-obj-y = io/
ifeq ($(CONFIG_SOFTMMU),y)
common-obj-y = blockdev.o blockdev-nbd.o block/
common-obj-y += bootdevice.o iothread.o
common-obj-y += job-qmp.o
common-obj-y += net/
common-obj-y += qdev-monitor.o device-hotplug.o
common-obj-$(CONFIG_WIN32) += os-win32.o
@@ -71,6 +119,8 @@ common-obj-y += vl.o
vl.o-cflags := $(GPROF_CFLAGS) $(SDL_CFLAGS)
common-obj-$(CONFIG_TPM) += tpm.o
common-obj-$(CONFIG_SLIRP) += slirp/
common-obj-y += backends/
common-obj-y += chardev/
@@ -83,8 +133,25 @@ common-obj-$(CONFIG_FDT) += device_tree.o
######################################################################
# qapi
common-obj-y += qapi/qapi-commands.o
common-obj-y += qapi/qapi-commands-block-core.o
common-obj-y += qapi/qapi-commands-block.o
common-obj-y += qapi/qapi-commands-char.o
common-obj-y += qapi/qapi-commands-common.o
common-obj-y += qapi/qapi-commands-crypto.o
common-obj-y += qapi/qapi-commands-introspect.o
common-obj-y += qapi/qapi-commands-migration.o
common-obj-y += qapi/qapi-commands-misc.o
common-obj-y += qapi/qapi-commands-net.o
common-obj-y += qapi/qapi-commands-rocker.o
common-obj-y += qapi/qapi-commands-run-state.o
common-obj-y += qapi/qapi-commands-sockets.o
common-obj-y += qapi/qapi-commands-tpm.o
common-obj-y += qapi/qapi-commands-trace.o
common-obj-y += qapi/qapi-commands-transaction.o
common-obj-y += qapi/qapi-commands-ui.o
common-obj-y += qapi/qapi-introspect.o
common-obj-y += qmp.o hmp.o
common-obj-y += qapi/
endif
#######################################################################
@@ -101,6 +168,7 @@ version-obj-$(CONFIG_WIN32) += $(BUILD_DIR)/version.o
######################################################################
# tracing
util-obj-y += trace/
target-obj-y += trace/
######################################################################
# guest agent
@@ -113,7 +181,6 @@ qga-vss-dll-obj-y = qga/
######################################################################
# contrib
elf2dmp-obj-y = contrib/elf2dmp/
ivshmem-client-obj-$(CONFIG_IVSHMEM) = contrib/ivshmem-client/
ivshmem-server-obj-$(CONFIG_IVSHMEM) = contrib/ivshmem-server/
libvhost-user-obj-y = contrib/libvhost-user/
@@ -121,76 +188,69 @@ vhost-user-scsi.o-cflags := $(LIBISCSI_CFLAGS)
vhost-user-scsi.o-libs := $(LIBISCSI_LIBS)
vhost-user-scsi-obj-y = contrib/vhost-user-scsi/
vhost-user-blk-obj-y = contrib/vhost-user-blk/
rdmacm-mux-obj-y = contrib/rdmacm-mux/
######################################################################
trace-events-subdirs =
trace-events-subdirs += accel/kvm
trace-events-subdirs += accel/tcg
trace-events-subdirs += audio
trace-events-subdirs += authz
trace-events-subdirs += util
trace-events-subdirs += crypto
trace-events-subdirs += io
trace-events-subdirs += migration
trace-events-subdirs += block
trace-events-subdirs += chardev
trace-events-subdirs += crypto
trace-events-subdirs += hw/9pfs
trace-events-subdirs += hw/acpi
trace-events-subdirs += hw/alpha
trace-events-subdirs += hw/arm
trace-events-subdirs += hw/audio
trace-events-subdirs += hw/block
trace-events-subdirs += hw/block/dataplane
trace-events-subdirs += hw/char
trace-events-subdirs += hw/display
trace-events-subdirs += hw/dma
trace-events-subdirs += hw/hppa
trace-events-subdirs += hw/i2c
trace-events-subdirs += hw/i386
trace-events-subdirs += hw/i386/xen
trace-events-subdirs += hw/ide
trace-events-subdirs += hw/input
trace-events-subdirs += hw/intc
trace-events-subdirs += hw/isa
trace-events-subdirs += hw/mem
trace-events-subdirs += hw/misc
trace-events-subdirs += hw/misc/macio
trace-events-subdirs += hw/net
trace-events-subdirs += hw/nvram
trace-events-subdirs += hw/pci
trace-events-subdirs += hw/pci-host
trace-events-subdirs += hw/ppc
trace-events-subdirs += hw/rdma
trace-events-subdirs += hw/rdma/vmw
trace-events-subdirs += hw/s390x
trace-events-subdirs += hw/virtio
trace-events-subdirs += hw/audio
trace-events-subdirs += hw/misc
trace-events-subdirs += hw/misc/macio
trace-events-subdirs += hw/usb
trace-events-subdirs += hw/scsi
trace-events-subdirs += hw/sd
trace-events-subdirs += hw/nvram
trace-events-subdirs += hw/display
trace-events-subdirs += hw/input
trace-events-subdirs += hw/timer
trace-events-subdirs += hw/dma
trace-events-subdirs += hw/sparc
trace-events-subdirs += hw/sparc64
trace-events-subdirs += hw/timer
trace-events-subdirs += hw/tpm
trace-events-subdirs += hw/usb
trace-events-subdirs += hw/sd
trace-events-subdirs += hw/isa
trace-events-subdirs += hw/mem
trace-events-subdirs += hw/i386
trace-events-subdirs += hw/i386/xen
trace-events-subdirs += hw/9pfs
trace-events-subdirs += hw/ppc
trace-events-subdirs += hw/pci
trace-events-subdirs += hw/pci-host
trace-events-subdirs += hw/s390x
trace-events-subdirs += hw/vfio
trace-events-subdirs += hw/virtio
trace-events-subdirs += hw/watchdog
trace-events-subdirs += hw/acpi
trace-events-subdirs += hw/arm
trace-events-subdirs += hw/alpha
trace-events-subdirs += hw/hppa
trace-events-subdirs += hw/xen
trace-events-subdirs += hw/gpio
trace-events-subdirs += io
trace-events-subdirs += linux-user
trace-events-subdirs += migration
trace-events-subdirs += nbd
trace-events-subdirs += hw/ide
trace-events-subdirs += hw/tpm
trace-events-subdirs += ui
trace-events-subdirs += audio
trace-events-subdirs += net
trace-events-subdirs += qapi
trace-events-subdirs += qom
trace-events-subdirs += scsi
trace-events-subdirs += target/arm
trace-events-subdirs += target/hppa
trace-events-subdirs += target/i386
trace-events-subdirs += target/mips
trace-events-subdirs += target/ppc
trace-events-subdirs += target/riscv
trace-events-subdirs += target/s390x
trace-events-subdirs += target/sparc
trace-events-subdirs += ui
trace-events-subdirs += util
trace-events-subdirs += target/s390x
trace-events-subdirs += target/ppc
trace-events-subdirs += qom
trace-events-subdirs += linux-user
trace-events-subdirs += qapi
trace-events-subdirs += accel/tcg
trace-events-subdirs += accel/kvm
trace-events-subdirs += nbd
trace-events-subdirs += scsi
trace-events-files = $(SRC_PATH)/trace-events $(trace-events-subdirs:%=$(SRC_PATH)/%/trace-events)

View File

@@ -4,11 +4,8 @@ BUILD_DIR?=$(CURDIR)/..
include ../config-host.mak
include config-target.mak
include $(SRC_PATH)/rules.mak
ifdef CONFIG_SOFTMMU
include config-devices.mak
endif
include $(SRC_PATH)/rules.mak
$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
ifdef CONFIG_LINUX
@@ -39,14 +36,11 @@ endif
PROGS=$(QEMU_PROG) $(QEMU_PROGW)
STPFILES=
# Makefile Tests
include $(SRC_PATH)/tests/tcg/Makefile.include
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp $(QEMU_PROG)-log.stp
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
@@ -85,14 +79,6 @@ $(QEMU_PROG)-simpletrace.stp: $(BUILD_DIR)/trace-events-all $(tracetool-y)
--probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
$(QEMU_PROG)-log.stp: $(BUILD_DIR)/trace-events-all $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=log-stap \
--backends=$(TRACE_BACKENDS) \
--probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-log.stp")
else
stap:
endif
@@ -103,8 +89,6 @@ all: $(PROGS) stap
# Dummy command so that make thinks it has done something
@true
obj-y += trace/
#########################################################
# cpu emulator library
obj-y += exec.o
@@ -113,7 +97,7 @@ obj-$(CONFIG_TCG) += tcg/tcg.o tcg/tcg-op.o tcg/tcg-op-vec.o tcg/tcg-op-gvec.o
obj-$(CONFIG_TCG) += tcg/tcg-common.o tcg/optimize.o
obj-$(CONFIG_TCG_INTERPRETER) += tcg/tci.o
obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
obj-$(CONFIG_TCG) += fpu/softfloat.o
obj-y += fpu/softfloat.o
obj-y += target/$(TARGET_BASE_ARCH)/
obj-y += disas.o
obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
@@ -151,11 +135,9 @@ ifdef CONFIG_SOFTMMU
obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o numa.o
obj-y += qtest.o
obj-y += hw/
obj-y += qapi/
obj-y += memory.o
obj-y += memory_mapping.o
obj-y += dump.o
obj-$(TARGET_X86_64) += win_dump.o
obj-y += migration/ram.o
LIBS := $(libs_softmmu) $(LIBS)
@@ -170,12 +152,20 @@ GENERATED_FILES += hmp-commands.h hmp-commands-info.h
endif # CONFIG_SOFTMMU
# Workaround for http://gcc.gnu.org/PR55489, see configure.
%/translate.o: QEMU_CFLAGS += $(TRANSLATE_OPT_CFLAGS)
dummy := $(call unnest-vars,,obj-y)
all-obj-y := $(obj-y)
target-obj-y :=
block-obj-y :=
common-obj-y :=
chardev-obj-y :=
include $(SRC_PATH)/Makefile.objs
dummy := $(call unnest-vars,,target-obj-y)
target-obj-y-save := $(target-obj-y)
dummy := $(call unnest-vars,.., \
authz-obj-y \
block-obj-y \
block-obj-m \
chardev-obj-y \
@@ -185,17 +175,16 @@ dummy := $(call unnest-vars,.., \
io-obj-y \
common-obj-y \
common-obj-m)
target-obj-y := $(target-obj-y-save)
all-obj-y += $(common-obj-y)
all-obj-y += $(target-obj-y)
all-obj-y += $(qom-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(authz-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y)
all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
ifdef CONFIG_SOFTMMU
$(QEMU_PROG_BUILD): config-devices.mak
endif
COMMON_LDADDS = ../libqemuutil.a
@@ -220,7 +209,6 @@ clean: clean-target
rm -f *.a *~ $(PROGS)
rm -f $(shell find . -name '*.[od]')
rm -f hmp-commands.h gdbstub-xml.c
rm -f trace/generated-helpers.c trace/generated-helpers.c-timestamp
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
@@ -233,7 +221,6 @@ ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
$(INSTALL_DATA) $(QEMU_PROG)-simpletrace.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-simpletrace.stp"
$(INSTALL_DATA) $(QEMU_PROG)-log.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-log.stp"
endif
GENERATED_FILES += config-target.h

4
README
View File

@@ -54,7 +54,7 @@ Submitting patches
The QEMU source code is maintained under the GIT version control system.
git clone https://git.qemu.org/git/qemu.git
git clone git://git.qemu.org/qemu.git
When submitting patches, one common approach is to use 'git
format-patch' and/or 'git send-email' to format & send the mail to the
@@ -70,7 +70,7 @@ the QEMU website
The QEMU website is also maintained under source control.
git clone https://git.qemu.org/git/qemu-web.git
git clone git://git.qemu.org/qemu-web.git
https://www.qemu.org/2017/02/04/the-new-qemu-website-is-up/
A 'git-publish' utility was created to make above process less

View File

@@ -1 +1 @@
3.1.92
2.12.1

View File

@@ -34,7 +34,6 @@
#include "qom/object.h"
#include "qemu/error-report.h"
#include "qemu/option.h"
#include "qapi/error.h"
static const TypeInfo accel_type = {
.name = TYPE_ACCEL,
@@ -65,16 +64,14 @@ static int accel_init_machine(AccelClass *acc, MachineState *ms)
ms->accelerator = NULL;
*(acc->allowed) = false;
object_unref(OBJECT(accel));
} else {
object_set_accelerator_compat_props(acc->compat_props);
}
return ret;
}
void configure_accelerator(MachineState *ms, const char *progname)
void configure_accelerator(MachineState *ms)
{
const char *accel;
char **accel_list, **tmp;
const char *accel, *p;
char buf[10];
int ret;
bool accel_initialised = false;
bool init_failed = false;
@@ -82,28 +79,17 @@ void configure_accelerator(MachineState *ms, const char *progname)
accel = qemu_opt_get(qemu_get_machine_opts(), "accel");
if (accel == NULL) {
/* Select the default accelerator */
int pnlen = strlen(progname);
if (pnlen >= 3 && g_str_equal(&progname[pnlen - 3], "kvm")) {
/* If the program name ends with "kvm", we prefer KVM */
accel = "kvm:tcg";
} else {
#if defined(CONFIG_TCG)
accel = "tcg";
#elif defined(CONFIG_KVM)
accel = "kvm";
#else
error_report("No accelerator selected and"
" no default accelerator available");
exit(1);
#endif
}
/* Use the default "accelerator", tcg */
accel = "tcg";
}
accel_list = g_strsplit(accel, ":", 0);
for (tmp = accel_list; !accel_initialised && tmp && *tmp; tmp++) {
acc = accel_find(*tmp);
p = accel;
while (!accel_initialised && *p != '\0') {
if (*p == ':') {
p++;
}
p = get_opt_name(buf, sizeof(buf), p, ':');
acc = accel_find(buf);
if (!acc) {
continue;
}
@@ -121,7 +107,6 @@ void configure_accelerator(MachineState *ms, const char *progname)
accel_initialised = true;
}
}
g_strfreev(accel_list);
if (!accel_initialised) {
if (!init_failed) {
@@ -135,13 +120,10 @@ void configure_accelerator(MachineState *ms, const char *progname)
}
}
void accel_setup_post(MachineState *ms)
void accel_register_compat_props(AccelState *accel)
{
AccelState *accel = ms->accelerator;
AccelClass *acc = ACCEL_GET_CLASS(accel);
if (acc->setup_post) {
acc->setup_post(ms, accel);
}
AccelClass *class = ACCEL_GET_CLASS(accel);
register_compat_props_array(class->global_props);
}
static void register_accel_types(void)

View File

@@ -39,7 +39,6 @@
#include "trace.h"
#include "hw/irq.h"
#include "sysemu/sev.h"
#include "sysemu/balloon.h"
#include "hw/boards.h"
@@ -79,14 +78,13 @@ struct KVMState
int fd;
int vmfd;
int coalesced_mmio;
int coalesced_pio;
struct kvm_coalesced_mmio_ring *coalesced_mmio_ring;
bool coalesced_flush_in_progress;
int vcpu_events;
int robust_singlestep;
int debugregs;
#ifdef KVM_CAP_SET_GUEST_DEBUG
QTAILQ_HEAD(, kvm_sw_breakpoint) kvm_sw_breakpoints;
struct kvm_sw_breakpoint_head kvm_sw_breakpoints;
#endif
int many_ioeventfds;
int intx_set_mask;
@@ -102,7 +100,7 @@ struct KVMState
int nr_allocated_irq_routes;
unsigned long *used_gsi_bitmap;
unsigned int gsi_count;
QTAILQ_HEAD(, KVMMSIRoute) msi_hashtab[KVM_MSI_HASHTAB_SIZE];
QTAILQ_HEAD(msi_hashtab, KVMMSIRoute) msi_hashtab[KVM_MSI_HASHTAB_SIZE];
#endif
KVMMemoryListener memory_listener;
QLIST_HEAD(, KVMParkedVcpu) kvm_parked_vcpus;
@@ -258,7 +256,7 @@ int kvm_physical_memory_addr_from_host(KVMState *s, void *ram,
return 0;
}
static int kvm_set_user_memory_region(KVMMemoryListener *kml, KVMSlot *slot, bool new)
static int kvm_set_user_memory_region(KVMMemoryListener *kml, KVMSlot *slot)
{
KVMState *s = kvm_state;
struct kvm_userspace_memory_region mem;
@@ -269,7 +267,7 @@ static int kvm_set_user_memory_region(KVMMemoryListener *kml, KVMSlot *slot, boo
mem.userspace_addr = (unsigned long)slot->ram;
mem.flags = slot->flags;
if (slot->memory_size && !new && (mem.flags ^ slot->old_flags) & KVM_MEM_READONLY) {
if (slot->memory_size && mem.flags & KVM_MEM_READONLY) {
/* Set the slot size to 0 before setting the slot to the desired
* value. This is needed based on KVM commit 75d61fbc. */
mem.memory_size = 0;
@@ -277,7 +275,6 @@ static int kvm_set_user_memory_region(KVMMemoryListener *kml, KVMSlot *slot, boo
}
mem.memory_size = slot->memory_size;
ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem);
slot->old_flags = mem.flags;
trace_kvm_set_user_memory(mem.slot, mem.flags, mem.guest_phys_addr,
mem.memory_size, mem.userspace_addr, ret);
return ret;
@@ -394,14 +391,17 @@ static int kvm_mem_flags(MemoryRegion *mr)
static int kvm_slot_update_flags(KVMMemoryListener *kml, KVMSlot *mem,
MemoryRegion *mr)
{
int old_flags;
old_flags = mem->flags;
mem->flags = kvm_mem_flags(mr);
/* If nothing changed effectively, no need to issue ioctl */
if (mem->flags == mem->old_flags) {
if (mem->flags == old_flags) {
return 0;
}
return kvm_set_user_memory_region(kml, mem, false);
return kvm_set_user_memory_region(kml, mem);
}
static int kvm_section_update_flags(KVMMemoryListener *kml,
@@ -561,45 +561,6 @@ static void kvm_uncoalesce_mmio_region(MemoryListener *listener,
}
}
static void kvm_coalesce_pio_add(MemoryListener *listener,
MemoryRegionSection *section,
hwaddr start, hwaddr size)
{
KVMState *s = kvm_state;
if (s->coalesced_pio) {
struct kvm_coalesced_mmio_zone zone;
zone.addr = start;
zone.size = size;
zone.pio = 1;
(void)kvm_vm_ioctl(s, KVM_REGISTER_COALESCED_MMIO, &zone);
}
}
static void kvm_coalesce_pio_del(MemoryListener *listener,
MemoryRegionSection *section,
hwaddr start, hwaddr size)
{
KVMState *s = kvm_state;
if (s->coalesced_pio) {
struct kvm_coalesced_mmio_zone zone;
zone.addr = start;
zone.size = size;
zone.pio = 1;
(void)kvm_vm_ioctl(s, KVM_UNREGISTER_COALESCED_MMIO, &zone);
}
}
static MemoryListener kvm_coalesced_pio_listener = {
.coalesced_io_add = kvm_coalesce_pio_add,
.coalesced_io_del = kvm_coalesce_pio_del,
};
int kvm_check_extension(KVMState *s, unsigned int extension)
{
int ret;
@@ -657,8 +618,6 @@ static int kvm_set_ioeventfd_mmio(int fd, hwaddr addr, uint32_t val,
.fd = fd,
};
trace_kvm_set_ioeventfd_mmio(fd, (uint64_t)addr, val, assign, size,
datamatch);
if (!kvm_enabled()) {
return -ENOSYS;
}
@@ -690,7 +649,6 @@ static int kvm_set_ioeventfd_pio(int fd, uint16_t addr, uint16_t val,
.fd = fd,
};
int r;
trace_kvm_set_ioeventfd_pio(fd, addr, val, assign, size, datamatch);
if (!kvm_enabled()) {
return -ENOSYS;
}
@@ -797,8 +755,7 @@ static void kvm_set_phys_mem(KVMMemoryListener *kml,
/* unregister the slot */
mem->memory_size = 0;
mem->flags = 0;
err = kvm_set_user_memory_region(kml, mem, false);
err = kvm_set_user_memory_region(kml, mem);
if (err) {
fprintf(stderr, "%s: error unregistering slot: %s\n",
__func__, strerror(-err));
@@ -814,7 +771,7 @@ static void kvm_set_phys_mem(KVMMemoryListener *kml,
mem->ram = ram;
mem->flags = kvm_mem_flags(mr);
err = kvm_set_user_memory_region(kml, mem, true);
err = kvm_set_user_memory_region(kml, mem);
if (err) {
fprintf(stderr, "%s: error registering slot: %s\n", __func__,
strerror(-err));
@@ -1593,7 +1550,7 @@ static int kvm_init(MachineState *ms)
kvm_type = qemu_opt_get(qemu_get_machine_opts(), "kvm-type");
if (mc->kvm_type) {
type = mc->kvm_type(ms, kvm_type);
type = mc->kvm_type(kvm_type);
} else if (kvm_type) {
ret = -EINVAL;
fprintf(stderr, "Invalid argument kvm-type=%s\n", kvm_type);
@@ -1659,8 +1616,6 @@ static int kvm_init(MachineState *ms)
}
s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
s->coalesced_pio = s->coalesced_mmio &&
kvm_check_extension(s, KVM_CAP_COALESCED_PIO);
#ifdef KVM_CAP_VCPU_EVENTS
s->vcpu_events = kvm_check_extension(s, KVM_CAP_VCPU_EVENTS);
@@ -1684,8 +1639,10 @@ static int kvm_init(MachineState *ms)
s->irq_set_ioctl = KVM_IRQ_LINE_STATUS;
}
#ifdef KVM_CAP_READONLY_MEM
kvm_readonly_mem_allowed =
(kvm_check_extension(s, KVM_CAP_READONLY_MEM) > 0);
#endif
kvm_eventfds_allowed =
(kvm_check_extension(s, KVM_CAP_IOEVENTFD) > 0);
@@ -1731,22 +1688,17 @@ static int kvm_init(MachineState *ms)
s->memory_listener.listener.eventfd_add = kvm_mem_ioeventfd_add;
s->memory_listener.listener.eventfd_del = kvm_mem_ioeventfd_del;
}
s->memory_listener.listener.coalesced_io_add = kvm_coalesce_mmio_region;
s->memory_listener.listener.coalesced_io_del = kvm_uncoalesce_mmio_region;
s->memory_listener.listener.coalesced_mmio_add = kvm_coalesce_mmio_region;
s->memory_listener.listener.coalesced_mmio_del = kvm_uncoalesce_mmio_region;
kvm_memory_listener_register(s, &s->memory_listener,
&address_space_memory, 0);
memory_listener_register(&kvm_io_listener,
&address_space_io);
memory_listener_register(&kvm_coalesced_pio_listener,
&address_space_io);
s->many_ioeventfds = kvm_check_many_ioeventfds();
s->sync_mmu = !!kvm_vm_check_extension(kvm_state, KVM_CAP_SYNC_MMU);
if (!s->sync_mmu) {
qemu_balloon_inhibit(true);
}
return 0;
@@ -1825,13 +1777,7 @@ void kvm_flush_coalesced_mmio_buffer(void)
ent = &ring->coalesced_mmio[ring->first];
if (ent->pio == 1) {
address_space_rw(&address_space_io, ent->phys_addr,
MEMTXATTRS_UNSPECIFIED, ent->data,
ent->len, true);
} else {
cpu_physical_memory_write(ent->phys_addr, ent->data, ent->len);
}
cpu_physical_memory_write(ent->phys_addr, ent->data, ent->len);
smp_wmb();
ring->first = (ring->first + 1) % KVM_COALESCED_MMIO_MAX;
}

View File

@@ -1,4 +1,4 @@
# See docs/devel/tracing.txt for syntax documentation.
# Trace events for debugging and performance instrumentation
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
@@ -12,7 +12,5 @@ kvm_irqchip_commit_routes(void) ""
kvm_irqchip_add_msi_route(char *name, int vector, int virq) "dev %s vector %d virq %d"
kvm_irqchip_update_msi_route(int virq) "Updating MSI route virq=%d"
kvm_irqchip_release_virq(int virq) "virq %d"
kvm_set_ioeventfd_mmio(int fd, uint64_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%" PRIx64 " val=0x%x assign: %d size: %d match: %d"
kvm_set_ioeventfd_pio(int fd, uint16_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%x val=0x%x assign: %d size: %d match: %d"
kvm_set_user_memory(uint32_t slot, uint32_t flags, uint64_t guest_phys_addr, uint64_t memory_size, uint64_t userspace_addr, int ret) "Slot#%d flags=0x%x gpa=0x%"PRIx64 " size=0x%"PRIx64 " ua=0x%"PRIx64 " ret=%d"

View File

@@ -21,6 +21,10 @@ void tb_flush(CPUState *cpu)
{
}
void tb_unlock(void)
{
}
void tlb_set_dirty(CPUState *cpu, target_ulong vaddr)
{
}

View File

@@ -7,7 +7,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,37 +18,26 @@
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "trace/mem.h"
#if DATA_SIZE == 16
# define SUFFIX o
# define DATA_TYPE Int128
# define BSWAP bswap128
# define SHIFT 4
#elif DATA_SIZE == 8
# define SUFFIX q
# define DATA_TYPE uint64_t
# define SDATA_TYPE int64_t
# define BSWAP bswap64
# define SHIFT 3
#elif DATA_SIZE == 4
# define SUFFIX l
# define DATA_TYPE uint32_t
# define SDATA_TYPE int32_t
# define BSWAP bswap32
# define SHIFT 2
#elif DATA_SIZE == 2
# define SUFFIX w
# define DATA_TYPE uint16_t
# define SDATA_TYPE int16_t
# define BSWAP bswap16
# define SHIFT 1
#elif DATA_SIZE == 1
# define SUFFIX b
# define DATA_TYPE uint8_t
# define SDATA_TYPE int8_t
# define BSWAP
# define SHIFT 0
#else
# error unsupported data size
#endif
@@ -59,37 +48,14 @@
# define ABI_TYPE uint32_t
#endif
#define ATOMIC_TRACE_RMW do { \
uint8_t info = glue(trace_mem_build_info_no_se, MEND)(SHIFT, false); \
\
trace_guest_mem_before_exec(ENV_GET_CPU(env), addr, info); \
trace_guest_mem_before_exec(ENV_GET_CPU(env), addr, \
info | TRACE_MEM_ST); \
} while (0)
#define ATOMIC_TRACE_LD do { \
uint8_t info = glue(trace_mem_build_info_no_se, MEND)(SHIFT, false); \
\
trace_guest_mem_before_exec(ENV_GET_CPU(env), addr, info); \
} while (0)
# define ATOMIC_TRACE_ST do { \
uint8_t info = glue(trace_mem_build_info_no_se, MEND)(SHIFT, true); \
\
trace_guest_mem_before_exec(ENV_GET_CPU(env), addr, info); \
} while (0)
/* Define host-endian atomic operations. Note that END is used within
the ATOMIC_NAME macro, and redefined below. */
#if DATA_SIZE == 1
# define END
# define MEND _be /* either le or be would be fine */
#elif defined(HOST_WORDS_BIGENDIAN)
# define END _be
# define MEND _be
#else
# define END _le
# define MEND _le
#endif
ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
@@ -97,27 +63,17 @@ ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
ATOMIC_TRACE_RMW;
#if DATA_SIZE == 16
ret = atomic16_cmpxchg(haddr, cmpv, newv);
#else
ret = atomic_cmpxchg__nocheck(haddr, cmpv, newv);
#endif
DATA_TYPE ret = atomic_cmpxchg__nocheck(haddr, cmpv, newv);
ATOMIC_MMU_CLEANUP;
return ret;
}
#if DATA_SIZE >= 16
#if HAVE_ATOMIC128
ABI_TYPE ATOMIC_NAME(ld)(CPUArchState *env, target_ulong addr EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE val, *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_LD;
val = atomic16_read(haddr);
__atomic_load(haddr, &val, __ATOMIC_RELAXED);
ATOMIC_MMU_CLEANUP;
return val;
}
@@ -127,22 +83,16 @@ void ATOMIC_NAME(st)(CPUArchState *env, target_ulong addr,
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_ST;
atomic16_set(haddr, val);
__atomic_store(haddr, &val, __ATOMIC_RELAXED);
ATOMIC_MMU_CLEANUP;
}
#endif
#else
ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
ATOMIC_TRACE_RMW;
ret = atomic_xchg__nocheck(haddr, val);
DATA_TYPE ret = atomic_xchg__nocheck(haddr, val);
ATOMIC_MMU_CLEANUP;
return ret;
}
@@ -153,10 +103,7 @@ ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
{ \
ATOMIC_MMU_DECLS; \
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
DATA_TYPE ret; \
\
ATOMIC_TRACE_RMW; \
ret = atomic_##X(haddr, val); \
DATA_TYPE ret = atomic_##X(haddr, val); \
ATOMIC_MMU_CLEANUP; \
return ret; \
}
@@ -171,48 +118,9 @@ GEN_ATOMIC_HELPER(or_fetch)
GEN_ATOMIC_HELPER(xor_fetch)
#undef GEN_ATOMIC_HELPER
/* These helpers are, as a whole, full barriers. Within the helper,
* the leading barrier is explicit and the trailing barrier is within
* cmpxchg primitive.
*
* Trace this load + RMW loop as a single RMW op. This way, regardless
* of CF_PARALLEL's value, we'll trace just a read and a write.
*/
#define GEN_ATOMIC_HELPER_FN(X, FN, XDATA_TYPE, RET) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE xval EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
XDATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
XDATA_TYPE cmp, old, new, val = xval; \
\
ATOMIC_TRACE_RMW; \
smp_mb(); \
cmp = atomic_read__nocheck(haddr); \
do { \
old = cmp; new = FN(old, val); \
cmp = atomic_cmpxchg__nocheck(haddr, old, new); \
} while (cmp != old); \
ATOMIC_MMU_CLEANUP; \
return RET; \
}
GEN_ATOMIC_HELPER_FN(fetch_smin, MIN, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umin, MIN, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_smax, MAX, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umax, MAX, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(smin_fetch, MIN, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umin_fetch, MIN, DATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(smax_fetch, MAX, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umax_fetch, MAX, DATA_TYPE, new)
#undef GEN_ATOMIC_HELPER_FN
#endif /* DATA SIZE >= 16 */
#undef END
#undef MEND
#if DATA_SIZE > 1
@@ -220,10 +128,8 @@ GEN_ATOMIC_HELPER_FN(umax_fetch, MAX, DATA_TYPE, new)
within the ATOMIC_NAME macro. */
#ifdef HOST_WORDS_BIGENDIAN
# define END _le
# define MEND _le
#else
# define END _be
# define MEND _be
#endif
ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
@@ -231,27 +137,17 @@ ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
ATOMIC_TRACE_RMW;
#if DATA_SIZE == 16
ret = atomic16_cmpxchg(haddr, BSWAP(cmpv), BSWAP(newv));
#else
ret = atomic_cmpxchg__nocheck(haddr, BSWAP(cmpv), BSWAP(newv));
#endif
DATA_TYPE ret = atomic_cmpxchg__nocheck(haddr, BSWAP(cmpv), BSWAP(newv));
ATOMIC_MMU_CLEANUP;
return BSWAP(ret);
}
#if DATA_SIZE >= 16
#if HAVE_ATOMIC128
ABI_TYPE ATOMIC_NAME(ld)(CPUArchState *env, target_ulong addr EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE val, *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_LD;
val = atomic16_read(haddr);
__atomic_load(haddr, &val, __ATOMIC_RELAXED);
ATOMIC_MMU_CLEANUP;
return BSWAP(val);
}
@@ -261,23 +157,17 @@ void ATOMIC_NAME(st)(CPUArchState *env, target_ulong addr,
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
ATOMIC_TRACE_ST;
val = BSWAP(val);
atomic16_set(haddr, val);
__atomic_store(haddr, &val, __ATOMIC_RELAXED);
ATOMIC_MMU_CLEANUP;
}
#endif
#else
ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
ABI_TYPE ret;
ATOMIC_TRACE_RMW;
ret = atomic_xchg__nocheck(haddr, BSWAP(val));
ABI_TYPE ret = atomic_xchg__nocheck(haddr, BSWAP(val));
ATOMIC_MMU_CLEANUP;
return BSWAP(ret);
}
@@ -288,10 +178,7 @@ ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
{ \
ATOMIC_MMU_DECLS; \
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
DATA_TYPE ret; \
\
ATOMIC_TRACE_RMW; \
ret = atomic_##X(haddr, BSWAP(val)); \
DATA_TYPE ret = atomic_##X(haddr, BSWAP(val)); \
ATOMIC_MMU_CLEANUP; \
return BSWAP(ret); \
}
@@ -305,64 +192,54 @@ GEN_ATOMIC_HELPER(xor_fetch)
#undef GEN_ATOMIC_HELPER
/* These helpers are, as a whole, full barriers. Within the helper,
* the leading barrier is explicit and the trailing barrier is within
* cmpxchg primitive.
*
* Trace this load + RMW loop as a single RMW op. This way, regardless
* of CF_PARALLEL's value, we'll trace just a read and a write.
*/
#define GEN_ATOMIC_HELPER_FN(X, FN, XDATA_TYPE, RET) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE xval EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
XDATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
XDATA_TYPE ldo, ldn, old, new, val = xval; \
\
ATOMIC_TRACE_RMW; \
smp_mb(); \
ldn = atomic_read__nocheck(haddr); \
do { \
ldo = ldn; old = BSWAP(ldo); new = FN(old, val); \
ldn = atomic_cmpxchg__nocheck(haddr, ldo, BSWAP(new)); \
} while (ldo != ldn); \
ATOMIC_MMU_CLEANUP; \
return RET; \
}
GEN_ATOMIC_HELPER_FN(fetch_smin, MIN, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umin, MIN, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_smax, MAX, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umax, MAX, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(smin_fetch, MIN, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umin_fetch, MIN, DATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(smax_fetch, MAX, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umax_fetch, MAX, DATA_TYPE, new)
/* Note that for addition, we need to use a separate cmpxchg loop instead
of bswaps for the reverse-host-endian helpers. */
#define ADD(X, Y) (X + Y)
GEN_ATOMIC_HELPER_FN(fetch_add, ADD, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(add_fetch, ADD, DATA_TYPE, new)
#undef ADD
ABI_TYPE ATOMIC_NAME(fetch_add)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ldo, ldn, ret, sto;
#undef GEN_ATOMIC_HELPER_FN
ldo = atomic_read__nocheck(haddr);
while (1) {
ret = BSWAP(ldo);
sto = BSWAP(ret + val);
ldn = atomic_cmpxchg__nocheck(haddr, ldo, sto);
if (ldn == ldo) {
ATOMIC_MMU_CLEANUP;
return ret;
}
ldo = ldn;
}
}
ABI_TYPE ATOMIC_NAME(add_fetch)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ldo, ldn, ret, sto;
ldo = atomic_read__nocheck(haddr);
while (1) {
ret = BSWAP(ldo) + val;
sto = BSWAP(ret);
ldn = atomic_cmpxchg__nocheck(haddr, ldo, sto);
if (ldn == ldo) {
ATOMIC_MMU_CLEANUP;
return ret;
}
ldo = ldn;
}
}
#endif /* DATA_SIZE >= 16 */
#undef END
#undef MEND
#endif /* DATA_SIZE > 1 */
#undef ATOMIC_TRACE_ST
#undef ATOMIC_TRACE_LD
#undef ATOMIC_TRACE_RMW
#undef BSWAP
#undef ABI_TYPE
#undef DATA_TYPE
#undef SDATA_TYPE
#undef SUFFIX
#undef DATA_SIZE
#undef SHIFT

View File

@@ -6,7 +6,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of

View File

@@ -6,7 +6,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -25,6 +25,7 @@
#include "qemu/atomic.h"
#include "sysemu/qtest.h"
#include "qemu/timer.h"
#include "exec/address-spaces.h"
#include "qemu/rcu.h"
#include "exec/tb-hash.h"
#include "exec/tb-lookup.h"
@@ -155,14 +156,11 @@ static inline tcg_target_ulong cpu_tb_exec(CPUState *cpu, TranslationBlock *itb)
if (qemu_loglevel_mask(CPU_LOG_TB_CPU)
&& qemu_log_in_addr_range(itb->pc)) {
qemu_log_lock();
int flags = 0;
if (qemu_loglevel_mask(CPU_LOG_TB_FPU)) {
flags |= CPU_DUMP_FPU;
}
#if defined(TARGET_I386)
flags |= CPU_DUMP_CCOP;
log_cpu_state(cpu, CPU_DUMP_CCOP);
#else
log_cpu_state(cpu, 0);
#endif
log_cpu_state(cpu, flags);
qemu_log_unlock();
}
#endif /* DEBUG_DISAS */
@@ -212,20 +210,20 @@ static void cpu_exec_nocache(CPUState *cpu, int max_cycles,
We only end up here when an existing TB is too long. */
cflags |= MIN(max_cycles, CF_COUNT_MASK);
mmap_lock();
tb_lock();
tb = tb_gen_code(cpu, orig_tb->pc, orig_tb->cs_base,
orig_tb->flags, cflags);
tb->orig_tb = orig_tb;
mmap_unlock();
tb_unlock();
/* execute the generated code */
trace_exec_tb_nocache(tb, tb->pc);
cpu_tb_exec(cpu, tb);
mmap_lock();
tb_lock();
tb_phys_invalidate(tb, -1);
mmap_unlock();
tcg_tb_remove(tb);
tb_remove(tb);
tb_unlock();
}
#endif
@@ -244,7 +242,12 @@ void cpu_exec_step_atomic(CPUState *cpu)
tb = tb_lookup__cpu_state(cpu, &pc, &cs_base, &flags, cf_mask);
if (tb == NULL) {
mmap_lock();
tb = tb_gen_code(cpu, pc, cs_base, flags, cflags);
tb_lock();
tb = tb_htable_lookup(cpu, pc, cs_base, flags, cf_mask);
if (likely(tb == NULL)) {
tb = tb_gen_code(cpu, pc, cs_base, flags, cflags);
}
tb_unlock();
mmap_unlock();
}
@@ -259,17 +262,15 @@ void cpu_exec_step_atomic(CPUState *cpu)
cpu_tb_exec(cpu, tb);
cc->cpu_exec_exit(cpu);
} else {
/*
/* We may have exited due to another problem here, so we need
* to reset any tb_locks we may have taken but didn't release.
* The mmap_lock is dropped by tb_gen_code if it runs out of
* memory.
*/
#ifndef CONFIG_SOFTMMU
tcg_debug_assert(!have_mmap_lock());
#endif
if (qemu_mutex_iothread_locked()) {
qemu_mutex_unlock_iothread();
}
assert_no_pages_locked();
tb_lock_reset();
}
if (in_exclusive_region) {
@@ -292,7 +293,7 @@ struct tb_desc {
uint32_t trace_vcpu_dstate;
};
static bool tb_lookup_cmp(const void *p, const void *d)
static bool tb_cmp(const void *p, const void *d)
{
const TranslationBlock *tb = p;
const struct tb_desc *desc = d;
@@ -335,12 +336,9 @@ TranslationBlock *tb_htable_lookup(CPUState *cpu, target_ulong pc,
desc.trace_vcpu_dstate = *cpu->trace_dstate;
desc.pc = pc;
phys_pc = get_page_addr_code(desc.env, pc);
if (phys_pc == -1) {
return NULL;
}
desc.phys_page1 = phys_pc & TARGET_PAGE_MASK;
h = tb_hash_func(phys_pc, pc, flags, cf_mask, *cpu->trace_dstate);
return qht_lookup_custom(&tb_ctx.htable, &desc, h, tb_lookup_cmp);
return qht_lookup(&tb_ctx.htable, tb_cmp, &desc, h);
}
void tb_set_jmp_target(TranslationBlock *tb, int n, uintptr_t addr)
@@ -354,43 +352,28 @@ void tb_set_jmp_target(TranslationBlock *tb, int n, uintptr_t addr)
}
}
/* Called with tb_lock held. */
static inline void tb_add_jump(TranslationBlock *tb, int n,
TranslationBlock *tb_next)
{
uintptr_t old;
assert(n < ARRAY_SIZE(tb->jmp_list_next));
qemu_spin_lock(&tb_next->jmp_lock);
/* make sure the destination TB is valid */
if (tb_next->cflags & CF_INVALID) {
goto out_unlock_next;
if (tb->jmp_list_next[n]) {
/* Another thread has already done this while we were
* outside of the lock; nothing to do in this case */
return;
}
/* Atomically claim the jump destination slot only if it was NULL */
old = atomic_cmpxchg(&tb->jmp_dest[n], (uintptr_t)NULL, (uintptr_t)tb_next);
if (old) {
goto out_unlock_next;
}
/* patch the native jump address */
tb_set_jmp_target(tb, n, (uintptr_t)tb_next->tc.ptr);
/* add in TB jmp list */
tb->jmp_list_next[n] = tb_next->jmp_list_head;
tb_next->jmp_list_head = (uintptr_t)tb | n;
qemu_spin_unlock(&tb_next->jmp_lock);
qemu_log_mask_and_addr(CPU_LOG_EXEC, tb->pc,
"Linking TBs %p [" TARGET_FMT_lx
"] index %d -> %p [" TARGET_FMT_lx "]\n",
tb->tc.ptr, tb->pc, n,
tb_next->tc.ptr, tb_next->pc);
return;
out_unlock_next:
qemu_spin_unlock(&tb_next->jmp_lock);
return;
/* patch the native jump address */
tb_set_jmp_target(tb, n, (uintptr_t)tb_next->tc.ptr);
/* add in TB jmp circular list */
tb->jmp_list_next[n] = tb_next->jmp_list_first;
tb_next->jmp_list_first = (uintptr_t)tb | n;
}
static inline TranslationBlock *tb_find(CPUState *cpu,
@@ -400,11 +383,27 @@ static inline TranslationBlock *tb_find(CPUState *cpu,
TranslationBlock *tb;
target_ulong cs_base, pc;
uint32_t flags;
bool acquired_tb_lock = false;
tb = tb_lookup__cpu_state(cpu, &pc, &cs_base, &flags, cf_mask);
if (tb == NULL) {
/* mmap_lock is needed by tb_gen_code, and mmap_lock must be
* taken outside tb_lock. As system emulation is currently
* single threaded the locks are NOPs.
*/
mmap_lock();
tb = tb_gen_code(cpu, pc, cs_base, flags, cf_mask);
tb_lock();
acquired_tb_lock = true;
/* There's a chance that our desired tb has been translated while
* taking the locks so we check again inside the lock.
*/
tb = tb_htable_lookup(cpu, pc, cs_base, flags, cf_mask);
if (likely(tb == NULL)) {
/* if no translated code available, then translate it now */
tb = tb_gen_code(cpu, pc, cs_base, flags, cf_mask);
}
mmap_unlock();
/* We add the TB in the virtual pc hash table for the fast lookup */
atomic_set(&cpu->tb_jmp_cache[tb_jmp_cache_hash_func(pc)], tb);
@@ -419,8 +418,17 @@ static inline TranslationBlock *tb_find(CPUState *cpu,
}
#endif
/* See if we can patch the calling TB. */
if (last_tb) {
tb_add_jump(last_tb, tb_exit, tb);
if (last_tb && !qemu_loglevel_mask(CPU_LOG_TB_NOCHAIN)) {
if (!acquired_tb_lock) {
tb_lock();
acquired_tb_lock = true;
}
if (!(tb->cflags & CF_INVALID)) {
tb_add_jump(last_tb, tb_exit, tb);
}
}
if (acquired_tb_lock) {
tb_unlock();
}
return tb;
}
@@ -696,13 +704,10 @@ int cpu_exec(CPUState *cpu)
g_assert(cpu == current_cpu);
g_assert(cc == CPU_GET_CLASS(cpu));
#endif /* buggy compiler */
#ifndef CONFIG_SOFTMMU
tcg_debug_assert(!have_mmap_lock());
#endif
tb_lock_reset();
if (qemu_mutex_iothread_locked()) {
qemu_mutex_unlock_iothread();
}
assert_no_pages_locked();
}
/* if an exception is pending, we execute it here */

File diff suppressed because it is too large Load Diff

View File

@@ -11,7 +11,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -98,23 +98,19 @@
static inline DATA_TYPE glue(io_read, SUFFIX)(CPUArchState *env,
size_t mmu_idx, size_t index,
target_ulong addr,
uintptr_t retaddr,
bool recheck,
MMUAccessType access_type)
uintptr_t retaddr)
{
CPUIOTLBEntry *iotlbentry = &env->iotlb[mmu_idx][index];
return io_readx(env, iotlbentry, mmu_idx, addr, retaddr, recheck,
access_type, DATA_SIZE);
return io_readx(env, iotlbentry, mmu_idx, addr, retaddr, DATA_SIZE);
}
#endif
WORD_TYPE helper_le_ld_name(CPUArchState *env, target_ulong addr,
TCGMemOpIdx oi, uintptr_t retaddr)
{
uintptr_t mmu_idx = get_mmuidx(oi);
uintptr_t index = tlb_index(env, mmu_idx, addr);
CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr);
target_ulong tlb_addr = entry->ADDR_READ;
unsigned mmu_idx = get_mmuidx(oi);
int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
target_ulong tlb_addr = env->tlb_table[mmu_idx][index].ADDR_READ;
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
DATA_TYPE res;
@@ -125,14 +121,13 @@ WORD_TYPE helper_le_ld_name(CPUArchState *env, target_ulong addr,
}
/* If the TLB entry is for a different page, reload and try again. */
if (!tlb_hit(tlb_addr, addr)) {
if ((addr & TARGET_PAGE_MASK)
!= (tlb_addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK))) {
if (!VICTIM_TLB_HIT(ADDR_READ, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, READ_ACCESS_TYPE,
mmu_idx, retaddr);
index = tlb_index(env, mmu_idx, addr);
entry = tlb_entry(env, mmu_idx, addr);
}
tlb_addr = entry->ADDR_READ;
tlb_addr = env->tlb_table[mmu_idx][index].ADDR_READ;
}
/* Handle an IO access. */
@@ -143,9 +138,7 @@ WORD_TYPE helper_le_ld_name(CPUArchState *env, target_ulong addr,
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
res = glue(io_read, SUFFIX)(env, mmu_idx, index, addr, retaddr,
tlb_addr & TLB_RECHECK,
READ_ACCESS_TYPE);
res = glue(io_read, SUFFIX)(env, mmu_idx, index, addr, retaddr);
res = TGT_LE(res);
return res;
}
@@ -169,7 +162,7 @@ WORD_TYPE helper_le_ld_name(CPUArchState *env, target_ulong addr,
return res;
}
haddr = addr + entry->addend;
haddr = addr + env->tlb_table[mmu_idx][index].addend;
#if DATA_SIZE == 1
res = glue(glue(ld, LSUFFIX), _p)((uint8_t *)haddr);
#else
@@ -182,10 +175,9 @@ WORD_TYPE helper_le_ld_name(CPUArchState *env, target_ulong addr,
WORD_TYPE helper_be_ld_name(CPUArchState *env, target_ulong addr,
TCGMemOpIdx oi, uintptr_t retaddr)
{
uintptr_t mmu_idx = get_mmuidx(oi);
uintptr_t index = tlb_index(env, mmu_idx, addr);
CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr);
target_ulong tlb_addr = entry->ADDR_READ;
unsigned mmu_idx = get_mmuidx(oi);
int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
target_ulong tlb_addr = env->tlb_table[mmu_idx][index].ADDR_READ;
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
DATA_TYPE res;
@@ -196,14 +188,13 @@ WORD_TYPE helper_be_ld_name(CPUArchState *env, target_ulong addr,
}
/* If the TLB entry is for a different page, reload and try again. */
if (!tlb_hit(tlb_addr, addr)) {
if ((addr & TARGET_PAGE_MASK)
!= (tlb_addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK))) {
if (!VICTIM_TLB_HIT(ADDR_READ, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, READ_ACCESS_TYPE,
mmu_idx, retaddr);
index = tlb_index(env, mmu_idx, addr);
entry = tlb_entry(env, mmu_idx, addr);
}
tlb_addr = entry->ADDR_READ;
tlb_addr = env->tlb_table[mmu_idx][index].ADDR_READ;
}
/* Handle an IO access. */
@@ -214,9 +205,7 @@ WORD_TYPE helper_be_ld_name(CPUArchState *env, target_ulong addr,
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
res = glue(io_read, SUFFIX)(env, mmu_idx, index, addr, retaddr,
tlb_addr & TLB_RECHECK,
READ_ACCESS_TYPE);
res = glue(io_read, SUFFIX)(env, mmu_idx, index, addr, retaddr);
res = TGT_BE(res);
return res;
}
@@ -240,7 +229,7 @@ WORD_TYPE helper_be_ld_name(CPUArchState *env, target_ulong addr,
return res;
}
haddr = addr + entry->addend;
haddr = addr + env->tlb_table[mmu_idx][index].addend;
res = glue(glue(ld, LSUFFIX), _be_p)((uint8_t *)haddr);
return res;
}
@@ -270,21 +259,18 @@ static inline void glue(io_write, SUFFIX)(CPUArchState *env,
size_t mmu_idx, size_t index,
DATA_TYPE val,
target_ulong addr,
uintptr_t retaddr,
bool recheck)
uintptr_t retaddr)
{
CPUIOTLBEntry *iotlbentry = &env->iotlb[mmu_idx][index];
return io_writex(env, iotlbentry, mmu_idx, val, addr, retaddr,
recheck, DATA_SIZE);
return io_writex(env, iotlbentry, mmu_idx, val, addr, retaddr, DATA_SIZE);
}
void helper_le_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
TCGMemOpIdx oi, uintptr_t retaddr)
{
uintptr_t mmu_idx = get_mmuidx(oi);
uintptr_t index = tlb_index(env, mmu_idx, addr);
CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr);
target_ulong tlb_addr = tlb_addr_write(entry);
unsigned mmu_idx = get_mmuidx(oi);
int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
target_ulong tlb_addr = env->tlb_table[mmu_idx][index].addr_write;
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
@@ -294,14 +280,13 @@ void helper_le_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
}
/* If the TLB entry is for a different page, reload and try again. */
if (!tlb_hit(tlb_addr, addr)) {
if ((addr & TARGET_PAGE_MASK)
!= (tlb_addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK))) {
if (!VICTIM_TLB_HIT(addr_write, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
index = tlb_index(env, mmu_idx, addr);
entry = tlb_entry(env, mmu_idx, addr);
}
tlb_addr = tlb_addr_write(entry) & ~TLB_INVALID_MASK;
tlb_addr = env->tlb_table[mmu_idx][index].addr_write & ~TLB_INVALID_MASK;
}
/* Handle an IO access. */
@@ -313,8 +298,7 @@ void helper_le_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
val = TGT_LE(val);
glue(io_write, SUFFIX)(env, mmu_idx, index, val, addr,
retaddr, tlb_addr & TLB_RECHECK);
glue(io_write, SUFFIX)(env, mmu_idx, index, val, addr, retaddr);
return;
}
@@ -322,16 +306,16 @@ void helper_le_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
if (DATA_SIZE > 1
&& unlikely((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1
>= TARGET_PAGE_SIZE)) {
int i;
target_ulong page2;
CPUTLBEntry *entry2;
int i, index2;
target_ulong page2, tlb_addr2;
do_unaligned_access:
/* Ensure the second page is in the TLB. Note that the first page
is already guaranteed to be filled, and that the second page
cannot evict the first. */
page2 = (addr + DATA_SIZE) & TARGET_PAGE_MASK;
entry2 = tlb_entry(env, mmu_idx, page2);
if (!tlb_hit_page(tlb_addr_write(entry2), page2)
index2 = (page2 >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
tlb_addr2 = env->tlb_table[mmu_idx][index2].addr_write;
if (page2 != (tlb_addr2 & (TARGET_PAGE_MASK | TLB_INVALID_MASK))
&& !VICTIM_TLB_HIT(addr_write, page2)) {
tlb_fill(ENV_GET_CPU(env), page2, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
@@ -349,7 +333,7 @@ void helper_le_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
return;
}
haddr = addr + entry->addend;
haddr = addr + env->tlb_table[mmu_idx][index].addend;
#if DATA_SIZE == 1
glue(glue(st, SUFFIX), _p)((uint8_t *)haddr, val);
#else
@@ -361,10 +345,9 @@ void helper_le_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
void helper_be_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
TCGMemOpIdx oi, uintptr_t retaddr)
{
uintptr_t mmu_idx = get_mmuidx(oi);
uintptr_t index = tlb_index(env, mmu_idx, addr);
CPUTLBEntry *entry = tlb_entry(env, mmu_idx, addr);
target_ulong tlb_addr = tlb_addr_write(entry);
unsigned mmu_idx = get_mmuidx(oi);
int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
target_ulong tlb_addr = env->tlb_table[mmu_idx][index].addr_write;
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
@@ -374,14 +357,13 @@ void helper_be_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
}
/* If the TLB entry is for a different page, reload and try again. */
if (!tlb_hit(tlb_addr, addr)) {
if ((addr & TARGET_PAGE_MASK)
!= (tlb_addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK))) {
if (!VICTIM_TLB_HIT(addr_write, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
index = tlb_index(env, mmu_idx, addr);
entry = tlb_entry(env, mmu_idx, addr);
}
tlb_addr = tlb_addr_write(entry) & ~TLB_INVALID_MASK;
tlb_addr = env->tlb_table[mmu_idx][index].addr_write & ~TLB_INVALID_MASK;
}
/* Handle an IO access. */
@@ -393,8 +375,7 @@ void helper_be_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
val = TGT_BE(val);
glue(io_write, SUFFIX)(env, mmu_idx, index, val, addr, retaddr,
tlb_addr & TLB_RECHECK);
glue(io_write, SUFFIX)(env, mmu_idx, index, val, addr, retaddr);
return;
}
@@ -402,16 +383,16 @@ void helper_be_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
if (DATA_SIZE > 1
&& unlikely((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1
>= TARGET_PAGE_SIZE)) {
int i;
target_ulong page2;
CPUTLBEntry *entry2;
int i, index2;
target_ulong page2, tlb_addr2;
do_unaligned_access:
/* Ensure the second page is in the TLB. Note that the first page
is already guaranteed to be filled, and that the second page
cannot evict the first. */
page2 = (addr + DATA_SIZE) & TARGET_PAGE_MASK;
entry2 = tlb_entry(env, mmu_idx, page2);
if (!tlb_hit_page(tlb_addr_write(entry2), page2)
index2 = (page2 >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
tlb_addr2 = env->tlb_table[mmu_idx][index2].addr_write;
if (page2 != (tlb_addr2 & (TARGET_PAGE_MASK | TLB_INVALID_MASK))
&& !VICTIM_TLB_HIT(addr_write, page2)) {
tlb_fill(ENV_GET_CPU(env), page2, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
@@ -429,7 +410,7 @@ void helper_be_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
return;
}
haddr = addr + entry->addend;
haddr = addr + env->tlb_table[mmu_idx][index].addend;
glue(glue(st, SUFFIX), _be_p)((uint8_t *)haddr, val);
}
#endif /* DATA_SIZE > 1 */

View File

@@ -51,7 +51,7 @@ static void tcg_handle_interrupt(CPUState *cpu, int mask)
if (!qemu_cpu_is_self(cpu)) {
qemu_cpu_kick(cpu);
} else {
atomic_set(&cpu->icount_decr.u16.high, -1);
cpu->icount_decr.u16.high = -1;
if (use_icount &&
!cpu->can_do_io
&& (mask & ~old_mask) != 0) {

View File

@@ -6,7 +6,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -512,39 +512,6 @@ void HELPER(gvec_orc)(void *d, void *a, void *b, uint32_t desc)
clear_high(d, oprsz, desc);
}
void HELPER(gvec_nand)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(vec64)) {
*(vec64 *)(d + i) = ~(*(vec64 *)(a + i) & *(vec64 *)(b + i));
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_nor)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(vec64)) {
*(vec64 *)(d + i) = ~(*(vec64 *)(a + i) | *(vec64 *)(b + i));
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_eqv)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(vec64)) {
*(vec64 *)(d + i) = ~(*(vec64 *)(a + i) ^ *(vec64 *)(b + i));
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_ands)(void *d, void *a, uint64_t b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
@@ -1028,227 +995,3 @@ void HELPER(gvec_ussub64)(void *d, void *a, void *b, uint32_t desc)
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_smin8)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(int8_t)) {
int8_t aa = *(int8_t *)(a + i);
int8_t bb = *(int8_t *)(b + i);
int8_t dd = aa < bb ? aa : bb;
*(int8_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_smin16)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(int16_t)) {
int16_t aa = *(int16_t *)(a + i);
int16_t bb = *(int16_t *)(b + i);
int16_t dd = aa < bb ? aa : bb;
*(int16_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_smin32)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(int32_t)) {
int32_t aa = *(int32_t *)(a + i);
int32_t bb = *(int32_t *)(b + i);
int32_t dd = aa < bb ? aa : bb;
*(int32_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_smin64)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(int64_t)) {
int64_t aa = *(int64_t *)(a + i);
int64_t bb = *(int64_t *)(b + i);
int64_t dd = aa < bb ? aa : bb;
*(int64_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_smax8)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(int8_t)) {
int8_t aa = *(int8_t *)(a + i);
int8_t bb = *(int8_t *)(b + i);
int8_t dd = aa > bb ? aa : bb;
*(int8_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_smax16)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(int16_t)) {
int16_t aa = *(int16_t *)(a + i);
int16_t bb = *(int16_t *)(b + i);
int16_t dd = aa > bb ? aa : bb;
*(int16_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_smax32)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(int32_t)) {
int32_t aa = *(int32_t *)(a + i);
int32_t bb = *(int32_t *)(b + i);
int32_t dd = aa > bb ? aa : bb;
*(int32_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_smax64)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(int64_t)) {
int64_t aa = *(int64_t *)(a + i);
int64_t bb = *(int64_t *)(b + i);
int64_t dd = aa > bb ? aa : bb;
*(int64_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_umin8)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(uint8_t)) {
uint8_t aa = *(uint8_t *)(a + i);
uint8_t bb = *(uint8_t *)(b + i);
uint8_t dd = aa < bb ? aa : bb;
*(uint8_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_umin16)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(uint16_t)) {
uint16_t aa = *(uint16_t *)(a + i);
uint16_t bb = *(uint16_t *)(b + i);
uint16_t dd = aa < bb ? aa : bb;
*(uint16_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_umin32)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(uint32_t)) {
uint32_t aa = *(uint32_t *)(a + i);
uint32_t bb = *(uint32_t *)(b + i);
uint32_t dd = aa < bb ? aa : bb;
*(uint32_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_umin64)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(uint64_t)) {
uint64_t aa = *(uint64_t *)(a + i);
uint64_t bb = *(uint64_t *)(b + i);
uint64_t dd = aa < bb ? aa : bb;
*(uint64_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_umax8)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(uint8_t)) {
uint8_t aa = *(uint8_t *)(a + i);
uint8_t bb = *(uint8_t *)(b + i);
uint8_t dd = aa > bb ? aa : bb;
*(uint8_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_umax16)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(uint16_t)) {
uint16_t aa = *(uint16_t *)(a + i);
uint16_t bb = *(uint16_t *)(b + i);
uint16_t dd = aa > bb ? aa : bb;
*(uint16_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_umax32)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(uint32_t)) {
uint32_t aa = *(uint32_t *)(a + i);
uint32_t bb = *(uint32_t *)(b + i);
uint32_t dd = aa > bb ? aa : bb;
*(uint32_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}
void HELPER(gvec_umax64)(void *d, void *a, void *b, uint32_t desc)
{
intptr_t oprsz = simd_oprsz(desc);
intptr_t i;
for (i = 0; i < oprsz; i += sizeof(uint64_t)) {
uint64_t aa = *(uint64_t *)(a + i);
uint64_t bb = *(uint64_t *)(b + i);
uint64_t dd = aa > bb ? aa : bb;
*(uint64_t *)(d + i) = dd;
}
clear_high(d, oprsz, desc);
}

View File

@@ -125,19 +125,11 @@ GEN_ATOMIC_HELPERS(fetch_add)
GEN_ATOMIC_HELPERS(fetch_and)
GEN_ATOMIC_HELPERS(fetch_or)
GEN_ATOMIC_HELPERS(fetch_xor)
GEN_ATOMIC_HELPERS(fetch_smin)
GEN_ATOMIC_HELPERS(fetch_umin)
GEN_ATOMIC_HELPERS(fetch_smax)
GEN_ATOMIC_HELPERS(fetch_umax)
GEN_ATOMIC_HELPERS(add_fetch)
GEN_ATOMIC_HELPERS(and_fetch)
GEN_ATOMIC_HELPERS(or_fetch)
GEN_ATOMIC_HELPERS(xor_fetch)
GEN_ATOMIC_HELPERS(smin_fetch)
GEN_ATOMIC_HELPERS(umin_fetch)
GEN_ATOMIC_HELPERS(smax_fetch)
GEN_ATOMIC_HELPERS(umax_fetch)
GEN_ATOMIC_HELPERS(xchg)
@@ -200,26 +192,6 @@ DEF_HELPER_FLAGS_4(gvec_ussub16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg8, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg16, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg32, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
@@ -231,9 +203,6 @@ DEF_HELPER_FLAGS_4(gvec_or, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_xor, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_andc, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_orc, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_nand, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_nor, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eqv, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ands, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_xors, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)

View File

@@ -1,4 +1,4 @@
# See docs/devel/tracing.txt for syntax documentation.
# Trace events for debugging and performance instrumentation
# TCG related tracing (mostly disabled by default)
# cpu-exec.c

File diff suppressed because it is too large Load Diff

View File

@@ -6,7 +6,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -23,13 +23,10 @@
/* translate-all.c */
struct page_collection *page_collection_lock(tb_page_addr_t start,
tb_page_addr_t end);
void page_collection_unlock(struct page_collection *set);
void tb_invalidate_phys_page_fast(struct page_collection *pages,
tb_page_addr_t start, int len);
void tb_invalidate_phys_page_fast(tb_page_addr_t start, int len);
void tb_invalidate_phys_page_range(tb_page_addr_t start, tb_page_addr_t end,
int is_cpu_write_access);
void tb_invalidate_phys_range(tb_page_addr_t start, tb_page_addr_t end);
void tb_check_watchpoint(CPUState *cpu);
#ifdef CONFIG_USER_ONLY

View File

@@ -34,7 +34,7 @@ void translator_loop_temp_check(DisasContextBase *db)
void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
CPUState *cpu, TranslationBlock *tb)
{
int bp_insn = 0;
int max_insns;
/* Initialize DisasContext */
db->tb = tb;
@@ -45,18 +45,18 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
db->singlestep_enabled = cpu->singlestep_enabled;
/* Instruction counting */
db->max_insns = tb_cflags(db->tb) & CF_COUNT_MASK;
if (db->max_insns == 0) {
db->max_insns = CF_COUNT_MASK;
max_insns = tb_cflags(db->tb) & CF_COUNT_MASK;
if (max_insns == 0) {
max_insns = CF_COUNT_MASK;
}
if (db->max_insns > TCG_MAX_INSNS) {
db->max_insns = TCG_MAX_INSNS;
if (max_insns > TCG_MAX_INSNS) {
max_insns = TCG_MAX_INSNS;
}
if (db->singlestep_enabled || singlestep) {
db->max_insns = 1;
max_insns = 1;
}
ops->init_disas_context(db, cpu);
max_insns = ops->init_disas_context(db, cpu, max_insns);
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
/* Reset the temp count so that we can identify leaks */
@@ -73,13 +73,11 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
/* Pass breakpoint hits to target for further processing */
if (!db->singlestep_enabled
&& unlikely(!QTAILQ_EMPTY(&cpu->breakpoints))) {
if (unlikely(!QTAILQ_EMPTY(&cpu->breakpoints))) {
CPUBreakpoint *bp;
QTAILQ_FOREACH(bp, &cpu->breakpoints, entry) {
if (bp->pc == db->pc_next) {
if (ops->breakpoint_check(db, cpu, bp)) {
bp_insn = 1;
break;
}
}
@@ -97,8 +95,7 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
update db->pc_next and db->is_jmp to indicate what should be
done next -- either exiting this loop or locate the start of
the next instruction. */
if (db->num_insns == db->max_insns
&& (tb_cflags(db->tb) & CF_LAST_IO)) {
if (db->num_insns == max_insns && (tb_cflags(db->tb) & CF_LAST_IO)) {
/* Accept I/O on the last instruction. */
gen_io_start();
ops->translate_insn(db, cpu);
@@ -114,7 +111,7 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
/* Stop translation if the output buffer is full,
or we have executed all of the allowed instructions. */
if (tcg_op_buf_full() || db->num_insns >= db->max_insns) {
if (tcg_op_buf_full() || db->num_insns >= max_insns) {
db->is_jmp = DISAS_TOO_MANY;
break;
}
@@ -122,7 +119,7 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
/* Emit code to exit the TB, as indicated by db->is_jmp. */
ops->tb_stop(db, cpu);
gen_tb_end(db->tb, db->num_insns - bp_insn);
gen_tb_end(db->tb, db->num_insns);
/* The disas_log hook may use these values rather than recompute. */
db->tb->size = db->pc_next - db->pc_first;

View File

@@ -2,9 +2,6 @@
#include "qemu-common.h"
#include "qom/cpu.h"
#include "sysemu/replay.h"
#include "sysemu/sysemu.h"
bool enable_cpu_pm = false;
void cpu_resume(CPUState *cpu)
{

View File

@@ -6,7 +6,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -25,7 +25,6 @@
#include "exec/cpu_ldst.h"
#include "translate-all.h"
#include "exec/helper-proto.h"
#include "qemu/atomic128.h"
#undef EAX
#undef ECX
@@ -479,66 +478,28 @@ int cpu_signal_handler(int host_signum, void *pinfo,
#elif defined(__aarch64__)
#ifndef ESR_MAGIC
/* Pre-3.16 kernel headers don't have these, so provide fallback definitions */
#define ESR_MAGIC 0x45535201
struct esr_context {
struct _aarch64_ctx head;
uint64_t esr;
};
#endif
static inline struct _aarch64_ctx *first_ctx(ucontext_t *uc)
{
return (struct _aarch64_ctx *)&uc->uc_mcontext.__reserved;
}
static inline struct _aarch64_ctx *next_ctx(struct _aarch64_ctx *hdr)
{
return (struct _aarch64_ctx *)((char *)hdr + hdr->size);
}
int cpu_signal_handler(int host_signum, void *pinfo, void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
uintptr_t pc = uc->uc_mcontext.pc;
uint32_t insn = *(uint32_t *)pc;
bool is_write;
struct _aarch64_ctx *hdr;
struct esr_context const *esrctx = NULL;
/* Find the esr_context, which has the WnR bit in it */
for (hdr = first_ctx(uc); hdr->magic; hdr = next_ctx(hdr)) {
if (hdr->magic == ESR_MAGIC) {
esrctx = (struct esr_context const *)hdr;
break;
}
}
/* XXX: need kernel patch to get write flag faster. */
is_write = ( (insn & 0xbfff0000) == 0x0c000000 /* C3.3.1 */
|| (insn & 0xbfe00000) == 0x0c800000 /* C3.3.2 */
|| (insn & 0xbfdf0000) == 0x0d000000 /* C3.3.3 */
|| (insn & 0xbfc00000) == 0x0d800000 /* C3.3.4 */
|| (insn & 0x3f400000) == 0x08000000 /* C3.3.6 */
|| (insn & 0x3bc00000) == 0x39000000 /* C3.3.13 */
|| (insn & 0x3fc00000) == 0x3d800000 /* ... 128bit */
/* Ingore bits 10, 11 & 21, controlling indexing. */
|| (insn & 0x3bc00000) == 0x38000000 /* C3.3.8-12 */
|| (insn & 0x3fe00000) == 0x3c800000 /* ... 128bit */
/* Ignore bits 23 & 24, controlling indexing. */
|| (insn & 0x3a400000) == 0x28000000); /* C3.3.7,14-16 */
if (esrctx) {
/* For data aborts ESR.EC is 0b10010x: then bit 6 is the WnR bit */
uint64_t esr = esrctx->esr;
is_write = extract32(esr, 27, 5) == 0x12 && extract32(esr, 6, 1) == 1;
} else {
/*
* Fall back to parsing instructions; will only be needed
* for really ancient (pre-3.16) kernels.
*/
uint32_t insn = *(uint32_t *)pc;
is_write = ((insn & 0xbfff0000) == 0x0c000000 /* C3.3.1 */
|| (insn & 0xbfe00000) == 0x0c800000 /* C3.3.2 */
|| (insn & 0xbfdf0000) == 0x0d000000 /* C3.3.3 */
|| (insn & 0xbfc00000) == 0x0d800000 /* C3.3.4 */
|| (insn & 0x3f400000) == 0x08000000 /* C3.3.6 */
|| (insn & 0x3bc00000) == 0x39000000 /* C3.3.13 */
|| (insn & 0x3fc00000) == 0x3d800000 /* ... 128bit */
/* Ignore bits 10, 11 & 21, controlling indexing. */
|| (insn & 0x3bc00000) == 0x38000000 /* C3.3.8-12 */
|| (insn & 0x3fe00000) == 0x3c800000 /* ... 128bit */
/* Ignore bits 23 & 24, controlling indexing. */
|| (insn & 0x3a400000) == 0x28000000); /* C3.3.7,14-16 */
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
@@ -609,81 +570,6 @@ int cpu_signal_handler(int host_signum, void *pinfo,
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__riscv)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
greg_t pc = uc->uc_mcontext.__gregs[REG_PC];
uint32_t insn = *(uint32_t *)pc;
int is_write = 0;
/* Detect store by reading the instruction at the program
counter. Note: we currently only generate 32-bit
instructions so we thus only detect 32-bit stores */
switch (((insn >> 0) & 0b11)) {
case 3:
switch (((insn >> 2) & 0b11111)) {
case 8:
switch (((insn >> 12) & 0b111)) {
case 0: /* sb */
case 1: /* sh */
case 2: /* sw */
case 3: /* sd */
case 4: /* sq */
is_write = 1;
break;
default:
break;
}
break;
case 9:
switch (((insn >> 12) & 0b111)) {
case 2: /* fsw */
case 3: /* fsd */
case 4: /* fsq */
is_write = 1;
break;
default:
break;
}
break;
default:
break;
}
}
/* Check for compressed instructions */
switch (((insn >> 13) & 0b111)) {
case 7:
switch (insn & 0b11) {
case 0: /*c.sd */
case 2: /* c.sdsp */
is_write = 1;
break;
default:
break;
}
break;
case 6:
switch (insn & 0b11) {
case 0: /* c.sw */
case 3: /* c.swsp */
is_write = 1;
break;
default:
break;
}
break;
default:
break;
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#else
#error host CPU specific signal handler needed
@@ -729,7 +615,7 @@ static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
/* The following is only callable from other helpers, and matches up
with the softmmu version. */
#if HAVE_ATOMIC128 || HAVE_CMPXCHG128
#ifdef CONFIG_ATOMIC128
#undef EXTRA_ARGS
#undef ATOMIC_NAME
@@ -742,4 +628,4 @@ static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
#define DATA_SIZE 16
#include "atomic_template.h"
#endif
#endif /* CONFIG_ATOMIC128 */

View File

@@ -29,7 +29,6 @@
#include "hw/pci/pci.h"
#include "hw/audio/soundhw.h"
#include "qapi/qapi-commands-misc.h"
#include "qapi/error.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "hw/acpi/acpi.h"
@@ -52,14 +51,14 @@ int graphic_depth = 32;
#define QEMU_ARCH QEMU_ARCH_ARM
#elif defined(TARGET_CRIS)
#define QEMU_ARCH QEMU_ARCH_CRIS
#elif defined(TARGET_HPPA)
#define QEMU_ARCH QEMU_ARCH_HPPA
#elif defined(TARGET_I386)
#define QEMU_ARCH QEMU_ARCH_I386
#elif defined(TARGET_LM32)
#define QEMU_ARCH QEMU_ARCH_LM32
#elif defined(TARGET_HPPA)
#define QEMU_ARCH QEMU_ARCH_HPPA
#elif defined(TARGET_M68K)
#define QEMU_ARCH QEMU_ARCH_M68K
#elif defined(TARGET_LM32)
#define QEMU_ARCH QEMU_ARCH_LM32
#elif defined(TARGET_MICROBLAZE)
#define QEMU_ARCH QEMU_ARCH_MICROBLAZE
#elif defined(TARGET_MIPS)
@@ -80,12 +79,12 @@ int graphic_depth = 32;
#define QEMU_ARCH QEMU_ARCH_SH4
#elif defined(TARGET_SPARC)
#define QEMU_ARCH QEMU_ARCH_SPARC
#elif defined(TARGET_TRICORE)
#define QEMU_ARCH QEMU_ARCH_TRICORE
#elif defined(TARGET_UNICORE32)
#define QEMU_ARCH QEMU_ARCH_UNICORE32
#elif defined(TARGET_XTENSA)
#define QEMU_ARCH QEMU_ARCH_XTENSA
#elif defined(TARGET_UNICORE32)
#define QEMU_ARCH QEMU_ARCH_UNICORE32
#elif defined(TARGET_TRICORE)
#define QEMU_ARCH QEMU_ARCH_TRICORE
#endif
const uint32_t arch_type = QEMU_ARCH;
@@ -113,8 +112,7 @@ TargetInfo *qmp_query_target(Error **errp)
{
TargetInfo *info = g_malloc0(sizeof(*info));
info->arch = qapi_enum_parse(&SysEmuTarget_lookup, TARGET_NAME, -1,
&error_abort);
info->arch = g_strdup(TARGET_NAME);
return info;
}

View File

@@ -1,4 +1,4 @@
common-obj-y = audio.o audio_legacy.o noaudio.o wavaudio.o mixeng.o
common-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
common-obj-$(CONFIG_SPICE) += spiceaudio.o
common-obj-$(CONFIG_AUDIO_COREAUDIO) += coreaudio.o
common-obj-$(CONFIG_AUDIO_DSOUND) += dsoundaudio.o

View File

@@ -28,14 +28,35 @@
#include "audio.h"
#include "trace.h"
#if QEMU_GNUC_PREREQ(4, 3)
#pragma GCC diagnostic ignored "-Waddress"
#endif
#define AUDIO_CAP "alsa"
#include "audio_int.h"
typedef struct ALSAConf {
int size_in_usec_in;
int size_in_usec_out;
const char *pcm_name_in;
const char *pcm_name_out;
unsigned int buffer_size_in;
unsigned int period_size_in;
unsigned int buffer_size_out;
unsigned int period_size_out;
unsigned int threshold;
int buffer_size_in_overridden;
int period_size_in_overridden;
int buffer_size_out_overridden;
int period_size_out_overridden;
} ALSAConf;
struct pollhlp {
snd_pcm_t *handle;
struct pollfd *pfds;
ALSAConf *conf;
int count;
int mask;
};
@@ -47,7 +68,6 @@ typedef struct ALSAVoiceOut {
void *pcm_buf;
snd_pcm_t *handle;
struct pollhlp pollhlp;
Audiodev *dev;
} ALSAVoiceOut;
typedef struct ALSAVoiceIn {
@@ -55,18 +75,21 @@ typedef struct ALSAVoiceIn {
snd_pcm_t *handle;
void *pcm_buf;
struct pollhlp pollhlp;
Audiodev *dev;
} ALSAVoiceIn;
struct alsa_params_req {
int freq;
snd_pcm_format_t fmt;
int nchannels;
int size_in_usec;
int override_mask;
unsigned int buffer_size;
unsigned int period_size;
};
struct alsa_params_obt {
int freq;
AudioFormat fmt;
audfmt_e fmt;
int endianness;
int nchannels;
snd_pcm_uframes_t samples;
@@ -273,16 +296,16 @@ static int alsa_write (SWVoiceOut *sw, void *buf, int len)
return audio_pcm_sw_write (sw, buf, len);
}
static snd_pcm_format_t aud_to_alsafmt (AudioFormat fmt, int endianness)
static snd_pcm_format_t aud_to_alsafmt (audfmt_e fmt, int endianness)
{
switch (fmt) {
case AUDIO_FORMAT_S8:
case AUD_FMT_S8:
return SND_PCM_FORMAT_S8;
case AUDIO_FORMAT_U8:
case AUD_FMT_U8:
return SND_PCM_FORMAT_U8;
case AUDIO_FORMAT_S16:
case AUD_FMT_S16:
if (endianness) {
return SND_PCM_FORMAT_S16_BE;
}
@@ -290,7 +313,7 @@ static snd_pcm_format_t aud_to_alsafmt (AudioFormat fmt, int endianness)
return SND_PCM_FORMAT_S16_LE;
}
case AUDIO_FORMAT_U16:
case AUD_FMT_U16:
if (endianness) {
return SND_PCM_FORMAT_U16_BE;
}
@@ -298,7 +321,7 @@ static snd_pcm_format_t aud_to_alsafmt (AudioFormat fmt, int endianness)
return SND_PCM_FORMAT_U16_LE;
}
case AUDIO_FORMAT_S32:
case AUD_FMT_S32:
if (endianness) {
return SND_PCM_FORMAT_S32_BE;
}
@@ -306,7 +329,7 @@ static snd_pcm_format_t aud_to_alsafmt (AudioFormat fmt, int endianness)
return SND_PCM_FORMAT_S32_LE;
}
case AUDIO_FORMAT_U32:
case AUD_FMT_U32:
if (endianness) {
return SND_PCM_FORMAT_U32_BE;
}
@@ -323,58 +346,58 @@ static snd_pcm_format_t aud_to_alsafmt (AudioFormat fmt, int endianness)
}
}
static int alsa_to_audfmt (snd_pcm_format_t alsafmt, AudioFormat *fmt,
static int alsa_to_audfmt (snd_pcm_format_t alsafmt, audfmt_e *fmt,
int *endianness)
{
switch (alsafmt) {
case SND_PCM_FORMAT_S8:
*endianness = 0;
*fmt = AUDIO_FORMAT_S8;
*fmt = AUD_FMT_S8;
break;
case SND_PCM_FORMAT_U8:
*endianness = 0;
*fmt = AUDIO_FORMAT_U8;
*fmt = AUD_FMT_U8;
break;
case SND_PCM_FORMAT_S16_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case SND_PCM_FORMAT_U16_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
case SND_PCM_FORMAT_S16_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case SND_PCM_FORMAT_U16_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
case SND_PCM_FORMAT_S32_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_S32;
*fmt = AUD_FMT_S32;
break;
case SND_PCM_FORMAT_U32_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_U32;
*fmt = AUD_FMT_U32;
break;
case SND_PCM_FORMAT_S32_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_S32;
*fmt = AUD_FMT_S32;
break;
case SND_PCM_FORMAT_U32_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_U32;
*fmt = AUD_FMT_U32;
break;
default:
@@ -387,18 +410,17 @@ static int alsa_to_audfmt (snd_pcm_format_t alsafmt, AudioFormat *fmt,
static void alsa_dump_info (struct alsa_params_req *req,
struct alsa_params_obt *obt,
snd_pcm_format_t obtfmt,
AudiodevAlsaPerDirectionOptions *apdo)
snd_pcm_format_t obtfmt)
{
dolog("parameter | requested value | obtained value\n");
dolog("format | %10d | %10d\n", req->fmt, obtfmt);
dolog("channels | %10d | %10d\n",
req->nchannels, obt->nchannels);
dolog("frequency | %10d | %10d\n", req->freq, obt->freq);
dolog("============================================\n");
dolog("requested: buffer len %" PRId32 " period len %" PRId32 "\n",
apdo->buffer_length, apdo->period_length);
dolog("obtained: samples %ld\n", obt->samples);
dolog ("parameter | requested value | obtained value\n");
dolog ("format | %10d | %10d\n", req->fmt, obtfmt);
dolog ("channels | %10d | %10d\n",
req->nchannels, obt->nchannels);
dolog ("frequency | %10d | %10d\n", req->freq, obt->freq);
dolog ("============================================\n");
dolog ("requested: buffer size %d period size %d\n",
req->buffer_size, req->period_size);
dolog ("obtained: samples %ld\n", obt->samples);
}
static void alsa_set_threshold (snd_pcm_t *handle, snd_pcm_uframes_t threshold)
@@ -431,23 +453,23 @@ static void alsa_set_threshold (snd_pcm_t *handle, snd_pcm_uframes_t threshold)
}
}
static int alsa_open(bool in, struct alsa_params_req *req,
struct alsa_params_obt *obt, snd_pcm_t **handlep,
Audiodev *dev)
static int alsa_open (int in, struct alsa_params_req *req,
struct alsa_params_obt *obt, snd_pcm_t **handlep,
ALSAConf *conf)
{
AudiodevAlsaOptions *aopts = &dev->u.alsa;
AudiodevAlsaPerDirectionOptions *apdo = in ? aopts->in : aopts->out;
snd_pcm_t *handle;
snd_pcm_hw_params_t *hw_params;
int err;
int size_in_usec;
unsigned int freq, nchannels;
const char *pcm_name = apdo->has_dev ? apdo->dev : "default";
const char *pcm_name = in ? conf->pcm_name_in : conf->pcm_name_out;
snd_pcm_uframes_t obt_buffer_size;
const char *typ = in ? "ADC" : "DAC";
snd_pcm_format_t obtfmt;
freq = req->freq;
nchannels = req->nchannels;
size_in_usec = req->size_in_usec;
snd_pcm_hw_params_alloca (&hw_params);
@@ -507,42 +529,79 @@ static int alsa_open(bool in, struct alsa_params_req *req,
goto err;
}
if (apdo->buffer_length) {
int dir = 0;
unsigned int btime = apdo->buffer_length;
if (req->buffer_size) {
unsigned long obt;
err = snd_pcm_hw_params_set_buffer_time_near(
handle, hw_params, &btime, &dir);
if (size_in_usec) {
int dir = 0;
unsigned int btime = req->buffer_size;
err = snd_pcm_hw_params_set_buffer_time_near (
handle,
hw_params,
&btime,
&dir
);
obt = btime;
}
else {
snd_pcm_uframes_t bsize = req->buffer_size;
err = snd_pcm_hw_params_set_buffer_size_near (
handle,
hw_params,
&bsize
);
obt = bsize;
}
if (err < 0) {
alsa_logerr2(err, typ, "Failed to set buffer time to %" PRId32 "\n",
apdo->buffer_length);
alsa_logerr2 (err, typ, "Failed to set buffer %s to %d\n",
size_in_usec ? "time" : "size", req->buffer_size);
goto err;
}
if (apdo->has_buffer_length && btime != apdo->buffer_length) {
dolog("Requested buffer time %" PRId32
" was rejected, using %u\n", apdo->buffer_length, btime);
}
if ((req->override_mask & 2) && (obt - req->buffer_size))
dolog ("Requested buffer %s %u was rejected, using %lu\n",
size_in_usec ? "time" : "size", req->buffer_size, obt);
}
if (apdo->period_length) {
int dir = 0;
unsigned int ptime = apdo->period_length;
if (req->period_size) {
unsigned long obt;
err = snd_pcm_hw_params_set_period_time_near(handle, hw_params, &ptime,
&dir);
if (size_in_usec) {
int dir = 0;
unsigned int ptime = req->period_size;
err = snd_pcm_hw_params_set_period_time_near (
handle,
hw_params,
&ptime,
&dir
);
obt = ptime;
}
else {
int dir = 0;
snd_pcm_uframes_t psize = req->period_size;
err = snd_pcm_hw_params_set_period_size_near (
handle,
hw_params,
&psize,
&dir
);
obt = psize;
}
if (err < 0) {
alsa_logerr2(err, typ, "Failed to set period time to %" PRId32 "\n",
apdo->period_length);
alsa_logerr2 (err, typ, "Failed to set period %s to %d\n",
size_in_usec ? "time" : "size", req->period_size);
goto err;
}
if (apdo->has_period_length && ptime != apdo->period_length) {
dolog("Requested period time %" PRId32 " was rejected, using %d\n",
apdo->period_length, ptime);
}
if (((req->override_mask & 1) && (obt - req->period_size)))
dolog ("Requested period %s %u was rejected, using %lu\n",
size_in_usec ? "time" : "size", req->period_size, obt);
}
err = snd_pcm_hw_params (handle, hw_params);
@@ -574,12 +633,30 @@ static int alsa_open(bool in, struct alsa_params_req *req,
goto err;
}
if (!in && aopts->has_threshold && aopts->threshold) {
struct audsettings as = { .freq = freq };
alsa_set_threshold(
handle,
audio_buffer_frames(qapi_AudiodevAlsaPerDirectionOptions_base(apdo),
&as, aopts->threshold));
if (!in && conf->threshold) {
snd_pcm_uframes_t threshold;
int bytes_per_sec;
bytes_per_sec = freq << (nchannels == 2);
switch (obt->fmt) {
case AUD_FMT_S8:
case AUD_FMT_U8:
break;
case AUD_FMT_S16:
case AUD_FMT_U16:
bytes_per_sec <<= 1;
break;
case AUD_FMT_S32:
case AUD_FMT_U32:
bytes_per_sec <<= 2;
break;
}
threshold = (conf->threshold * bytes_per_sec) / 1000;
alsa_set_threshold (handle, threshold);
}
obt->nchannels = nchannels;
@@ -592,11 +669,11 @@ static int alsa_open(bool in, struct alsa_params_req *req,
obt->nchannels != req->nchannels ||
obt->freq != req->freq) {
dolog ("Audio parameters for %s\n", typ);
alsa_dump_info(req, obt, obtfmt, apdo);
alsa_dump_info (req, obt, obtfmt);
}
#ifdef DEBUG
alsa_dump_info(req, obt, obtfmt, pdo);
alsa_dump_info (req, obt, obtfmt);
#endif
return 0;
@@ -722,13 +799,19 @@ static int alsa_init_out(HWVoiceOut *hw, struct audsettings *as,
struct alsa_params_obt obt;
snd_pcm_t *handle;
struct audsettings obt_as;
Audiodev *dev = drv_opaque;
ALSAConf *conf = drv_opaque;
req.fmt = aud_to_alsafmt (as->fmt, as->endianness);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.period_size = conf->period_size_out;
req.buffer_size = conf->buffer_size_out;
req.size_in_usec = conf->size_in_usec_out;
req.override_mask =
(conf->period_size_out_overridden ? 1 : 0) |
(conf->buffer_size_out_overridden ? 2 : 0);
if (alsa_open(0, &req, &obt, &handle, dev)) {
if (alsa_open (0, &req, &obt, &handle, conf)) {
return -1;
}
@@ -749,7 +832,7 @@ static int alsa_init_out(HWVoiceOut *hw, struct audsettings *as,
}
alsa->handle = handle;
alsa->dev = dev;
alsa->pollhlp.conf = conf;
return 0;
}
@@ -789,12 +872,16 @@ static int alsa_voice_ctl (snd_pcm_t *handle, const char *typ, int ctl)
static int alsa_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
ALSAVoiceOut *alsa = (ALSAVoiceOut *) hw;
AudiodevAlsaPerDirectionOptions *apdo = alsa->dev->u.alsa.out;
switch (cmd) {
case VOICE_ENABLE:
{
bool poll_mode = apdo->try_poll;
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
ldebug ("enabling voice\n");
if (poll_mode && alsa_poll_out (hw)) {
@@ -823,13 +910,19 @@ static int alsa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
struct alsa_params_obt obt;
snd_pcm_t *handle;
struct audsettings obt_as;
Audiodev *dev = drv_opaque;
ALSAConf *conf = drv_opaque;
req.fmt = aud_to_alsafmt (as->fmt, as->endianness);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.period_size = conf->period_size_in;
req.buffer_size = conf->buffer_size_in;
req.size_in_usec = conf->size_in_usec_in;
req.override_mask =
(conf->period_size_in_overridden ? 1 : 0) |
(conf->buffer_size_in_overridden ? 2 : 0);
if (alsa_open(1, &req, &obt, &handle, dev)) {
if (alsa_open (1, &req, &obt, &handle, conf)) {
return -1;
}
@@ -850,7 +943,7 @@ static int alsa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
}
alsa->handle = handle;
alsa->dev = dev;
alsa->pollhlp.conf = conf;
return 0;
}
@@ -992,12 +1085,16 @@ static int alsa_read (SWVoiceIn *sw, void *buf, int size)
static int alsa_ctl_in (HWVoiceIn *hw, int cmd, ...)
{
ALSAVoiceIn *alsa = (ALSAVoiceIn *) hw;
AudiodevAlsaPerDirectionOptions *apdo = alsa->dev->u.alsa.in;
switch (cmd) {
case VOICE_ENABLE:
{
bool poll_mode = apdo->try_poll;
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
ldebug ("enabling voice\n");
if (poll_mode && alsa_poll_in (hw)) {
@@ -1020,54 +1117,88 @@ static int alsa_ctl_in (HWVoiceIn *hw, int cmd, ...)
return -1;
}
static void alsa_init_per_direction(AudiodevAlsaPerDirectionOptions *apdo)
static ALSAConf glob_conf = {
.buffer_size_out = 4096,
.period_size_out = 1024,
.pcm_name_out = "default",
.pcm_name_in = "default",
};
static void *alsa_audio_init (void)
{
if (!apdo->has_try_poll) {
apdo->try_poll = true;
apdo->has_try_poll = true;
}
}
static void *alsa_audio_init(Audiodev *dev)
{
AudiodevAlsaOptions *aopts;
assert(dev->driver == AUDIODEV_DRIVER_ALSA);
aopts = &dev->u.alsa;
alsa_init_per_direction(aopts->in);
alsa_init_per_direction(aopts->out);
/*
* need to define them, as otherwise alsa produces no sound
* doesn't set has_* so alsa_open can identify it wasn't set by the user
*/
if (!dev->u.alsa.out->has_period_length) {
/* 1024 frames assuming 44100Hz */
dev->u.alsa.out->period_length = 1024 * 1000000 / 44100;
}
if (!dev->u.alsa.out->has_buffer_length) {
/* 4096 frames assuming 44100Hz */
dev->u.alsa.out->buffer_length = 4096ll * 1000000 / 44100;
}
/*
* OptsVisitor sets unspecified optional fields to zero, but do not depend
* on it...
*/
if (!dev->u.alsa.in->has_period_length) {
dev->u.alsa.in->period_length = 0;
}
if (!dev->u.alsa.in->has_buffer_length) {
dev->u.alsa.in->buffer_length = 0;
}
return dev;
ALSAConf *conf = g_malloc(sizeof(ALSAConf));
*conf = glob_conf;
return conf;
}
static void alsa_audio_fini (void *opaque)
{
g_free(opaque);
}
static struct audio_option alsa_options[] = {
{
.name = "DAC_SIZE_IN_USEC",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.size_in_usec_out,
.descr = "DAC period/buffer size in microseconds (otherwise in frames)"
},
{
.name = "DAC_PERIOD_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.period_size_out,
.descr = "DAC period size (0 to go with system default)",
.overriddenp = &glob_conf.period_size_out_overridden
},
{
.name = "DAC_BUFFER_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.buffer_size_out,
.descr = "DAC buffer size (0 to go with system default)",
.overriddenp = &glob_conf.buffer_size_out_overridden
},
{
.name = "ADC_SIZE_IN_USEC",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.size_in_usec_in,
.descr =
"ADC period/buffer size in microseconds (otherwise in frames)"
},
{
.name = "ADC_PERIOD_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.period_size_in,
.descr = "ADC period size (0 to go with system default)",
.overriddenp = &glob_conf.period_size_in_overridden
},
{
.name = "ADC_BUFFER_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.buffer_size_in,
.descr = "ADC buffer size (0 to go with system default)",
.overriddenp = &glob_conf.buffer_size_in_overridden
},
{
.name = "THRESHOLD",
.tag = AUD_OPT_INT,
.valp = &glob_conf.threshold,
.descr = "(undocumented)"
},
{
.name = "DAC_DEV",
.tag = AUD_OPT_STR,
.valp = &glob_conf.pcm_name_out,
.descr = "DAC device name (for instance dmix)"
},
{
.name = "ADC_DEV",
.tag = AUD_OPT_STR,
.valp = &glob_conf.pcm_name_in,
.descr = "ADC device name"
},
{ /* End of list */ }
};
static struct audio_pcm_ops alsa_pcm_ops = {
.init_out = alsa_init_out,
.fini_out = alsa_fini_out,
@@ -1085,6 +1216,7 @@ static struct audio_pcm_ops alsa_pcm_ops = {
static struct audio_driver alsa_audio_driver = {
.name = "alsa",
.descr = "ALSA http://www.alsa-project.org",
.options = alsa_options,
.init = alsa_audio_init,
.fini = alsa_audio_fini,
.pcm_ops = &alsa_pcm_ops,

File diff suppressed because it is too large Load Diff

View File

@@ -26,31 +26,30 @@
#define QEMU_AUDIO_H
#include "qemu/queue.h"
#include "qapi/qapi-types-audio.h"
typedef void (*audio_callback_fn) (void *opaque, int avail);
typedef enum {
AUD_FMT_U8,
AUD_FMT_S8,
AUD_FMT_U16,
AUD_FMT_S16,
AUD_FMT_U32,
AUD_FMT_S32
} audfmt_e;
#ifdef HOST_WORDS_BIGENDIAN
#define AUDIO_HOST_ENDIANNESS 1
#else
#define AUDIO_HOST_ENDIANNESS 0
#endif
typedef struct audsettings {
struct audsettings {
int freq;
int nchannels;
AudioFormat fmt;
audfmt_e fmt;
int endianness;
} audsettings;
audsettings audiodev_to_audsettings(AudiodevPerDirectionOptions *pdo);
int audioformat_bytes_per_sample(AudioFormat fmt);
int audio_buffer_frames(AudiodevPerDirectionOptions *pdo,
audsettings *as, int def_usecs);
int audio_buffer_samples(AudiodevPerDirectionOptions *pdo,
audsettings *as, int def_usecs);
int audio_buffer_bytes(AudiodevPerDirectionOptions *pdo,
audsettings *as, int def_usecs);
};
typedef enum {
AUD_CNOTIFY_ENABLE,
@@ -90,6 +89,7 @@ typedef struct QEMUAudioTimeStamp {
void AUD_vlog (const char *cap, const char *fmt, va_list ap) GCC_FMT_ATTR(2, 0);
void AUD_log (const char *cap, const char *fmt, ...) GCC_FMT_ATTR(2, 3);
void AUD_help (void);
void AUD_register_card (const char *name, QEMUSoundCard *card);
void AUD_remove_card (QEMUSoundCard *card);
CaptureVoiceOut *AUD_add_capture (
@@ -171,8 +171,4 @@ void audio_sample_to_uint64(void *samples, int pos,
void audio_sample_from_uint64(void *samples, int pos,
uint64_t left, uint64_t right);
void audio_parse_option(const char *opt);
void audio_init_audiodevs(void);
void audio_legacy_help(void);
#endif /* QEMU_AUDIO_H */

View File

@@ -33,6 +33,22 @@
struct audio_pcm_ops;
typedef enum {
AUD_OPT_INT,
AUD_OPT_FMT,
AUD_OPT_STR,
AUD_OPT_BOOL
} audio_option_tag_e;
struct audio_option {
const char *name;
audio_option_tag_e tag;
void *valp;
const char *descr;
int *overriddenp;
int overridden;
};
struct audio_callback {
void *opaque;
audio_callback_fn fn;
@@ -129,7 +145,8 @@ typedef struct audio_driver audio_driver;
struct audio_driver {
const char *name;
const char *descr;
void *(*init) (Audiodev *);
struct audio_option *options;
void *(*init) (void);
void (*fini) (void *);
struct audio_pcm_ops *pcm_ops;
int can_be_default;
@@ -174,9 +191,8 @@ struct SWVoiceCap {
QLIST_ENTRY (SWVoiceCap) entries;
};
typedef struct AudioState {
struct AudioState {
struct audio_driver *drv;
Audiodev *dev;
void *drv_opaque;
QEMUTimer *ts;
@@ -187,13 +203,10 @@ typedef struct AudioState {
int nb_hw_voices_out;
int nb_hw_voices_in;
int vm_running;
int64_t period_ticks;
} AudioState;
};
extern const struct mixeng_volume nominal_volume;
extern const char *audio_prio_list[];
void audio_driver_register(audio_driver *drv);
audio_driver *audio_driver_lookup(const char *name);
@@ -235,18 +248,4 @@ static inline int audio_ring_dist (int dst, int src, int len)
#define AUDIO_STRINGIFY_(n) #n
#define AUDIO_STRINGIFY(n) AUDIO_STRINGIFY_(n)
typedef struct AudiodevListEntry {
Audiodev *dev;
QSIMPLEQ_ENTRY(AudiodevListEntry) next;
} AudiodevListEntry;
typedef QSIMPLEQ_HEAD(, AudiodevListEntry) AudiodevListHead;
AudiodevListHead audio_handle_legacy_opts(void);
void audio_free_audiodev_list(AudiodevListHead *head);
void audio_create_pdos(Audiodev *dev);
AudiodevPerDirectionOptions *audio_get_pdo_in(Audiodev *dev);
AudiodevPerDirectionOptions *audio_get_pdo_out(Audiodev *dev);
#endif /* QEMU_AUDIO_INT_H */

View File

@@ -1,550 +0,0 @@
/*
* QEMU Audio subsystem: legacy configuration handling
*
* Copyright (c) 2015-2019 Zoltán Kővágó <DirtY.iCE.hu@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "audio.h"
#include "audio_int.h"
#include "qemu-common.h"
#include "qemu/cutils.h"
#include "qemu/timer.h"
#include "qapi/error.h"
#include "qapi/qapi-visit-audio.h"
#include "qapi/visitor-impl.h"
#define AUDIO_CAP "audio-legacy"
#include "audio_int.h"
static uint32_t toui32(const char *str)
{
unsigned long long ret;
if (parse_uint_full(str, &ret, 10) || ret > UINT32_MAX) {
dolog("Invalid integer value `%s'\n", str);
exit(1);
}
return ret;
}
/* helper functions to convert env variables */
static void get_bool(const char *env, bool *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
*dst = toui32(val) != 0;
*has_dst = true;
}
}
static void get_int(const char *env, uint32_t *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
*dst = toui32(val);
*has_dst = true;
}
}
static void get_str(const char *env, char **dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
if (*has_dst) {
g_free(*dst);
}
*dst = g_strdup(val);
*has_dst = true;
}
}
static void get_fmt(const char *env, AudioFormat *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
size_t i;
for (i = 0; AudioFormat_lookup.size; ++i) {
if (strcasecmp(val, AudioFormat_lookup.array[i]) == 0) {
*dst = i;
*has_dst = true;
return;
}
}
dolog("Invalid audio format `%s'\n", val);
exit(1);
}
}
static void get_millis_to_usecs(const char *env, uint32_t *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
*dst = toui32(val) * 1000;
*has_dst = true;
}
}
static uint32_t frames_to_usecs(uint32_t frames,
AudiodevPerDirectionOptions *pdo)
{
uint32_t freq = pdo->has_frequency ? pdo->frequency : 44100;
return (frames * 1000000 + freq / 2) / freq;
}
static void get_frames_to_usecs(const char *env, uint32_t *dst, bool *has_dst,
AudiodevPerDirectionOptions *pdo)
{
const char *val = getenv(env);
if (val) {
*dst = frames_to_usecs(toui32(val), pdo);
*has_dst = true;
}
}
static uint32_t samples_to_usecs(uint32_t samples,
AudiodevPerDirectionOptions *pdo)
{
uint32_t channels = pdo->has_channels ? pdo->channels : 2;
return frames_to_usecs(samples / channels, pdo);
}
static void get_samples_to_usecs(const char *env, uint32_t *dst, bool *has_dst,
AudiodevPerDirectionOptions *pdo)
{
const char *val = getenv(env);
if (val) {
*dst = samples_to_usecs(toui32(val), pdo);
*has_dst = true;
}
}
static uint32_t bytes_to_usecs(uint32_t bytes, AudiodevPerDirectionOptions *pdo)
{
AudioFormat fmt = pdo->has_format ? pdo->format : AUDIO_FORMAT_S16;
uint32_t bytes_per_sample = audioformat_bytes_per_sample(fmt);
return samples_to_usecs(bytes / bytes_per_sample, pdo);
}
static void get_bytes_to_usecs(const char *env, uint32_t *dst, bool *has_dst,
AudiodevPerDirectionOptions *pdo)
{
const char *val = getenv(env);
if (val) {
*dst = bytes_to_usecs(toui32(val), pdo);
*has_dst = true;
}
}
/* backend specific functions */
/* ALSA */
static void handle_alsa_per_direction(
AudiodevAlsaPerDirectionOptions *apdo, const char *prefix)
{
char buf[64];
size_t len = strlen(prefix);
bool size_in_usecs = false;
bool dummy;
memcpy(buf, prefix, len);
strcpy(buf + len, "TRY_POLL");
get_bool(buf, &apdo->try_poll, &apdo->has_try_poll);
strcpy(buf + len, "DEV");
get_str(buf, &apdo->dev, &apdo->has_dev);
strcpy(buf + len, "SIZE_IN_USEC");
get_bool(buf, &size_in_usecs, &dummy);
strcpy(buf + len, "PERIOD_SIZE");
get_int(buf, &apdo->period_length, &apdo->has_period_length);
if (apdo->has_period_length && !size_in_usecs) {
apdo->period_length = frames_to_usecs(
apdo->period_length,
qapi_AudiodevAlsaPerDirectionOptions_base(apdo));
}
strcpy(buf + len, "BUFFER_SIZE");
get_int(buf, &apdo->buffer_length, &apdo->has_buffer_length);
if (apdo->has_buffer_length && !size_in_usecs) {
apdo->buffer_length = frames_to_usecs(
apdo->buffer_length,
qapi_AudiodevAlsaPerDirectionOptions_base(apdo));
}
}
static void handle_alsa(Audiodev *dev)
{
AudiodevAlsaOptions *aopt = &dev->u.alsa;
handle_alsa_per_direction(aopt->in, "QEMU_ALSA_ADC_");
handle_alsa_per_direction(aopt->out, "QEMU_ALSA_DAC_");
get_millis_to_usecs("QEMU_ALSA_THRESHOLD",
&aopt->threshold, &aopt->has_threshold);
}
/* coreaudio */
static void handle_coreaudio(Audiodev *dev)
{
get_frames_to_usecs(
"QEMU_COREAUDIO_BUFFER_SIZE",
&dev->u.coreaudio.out->buffer_length,
&dev->u.coreaudio.out->has_buffer_length,
qapi_AudiodevCoreaudioPerDirectionOptions_base(dev->u.coreaudio.out));
get_int("QEMU_COREAUDIO_BUFFER_COUNT",
&dev->u.coreaudio.out->buffer_count,
&dev->u.coreaudio.out->has_buffer_count);
}
/* dsound */
static void handle_dsound(Audiodev *dev)
{
get_millis_to_usecs("QEMU_DSOUND_LATENCY_MILLIS",
&dev->u.dsound.latency, &dev->u.dsound.has_latency);
get_bytes_to_usecs("QEMU_DSOUND_BUFSIZE_OUT",
&dev->u.dsound.out->buffer_length,
&dev->u.dsound.out->has_buffer_length,
dev->u.dsound.out);
get_bytes_to_usecs("QEMU_DSOUND_BUFSIZE_IN",
&dev->u.dsound.in->buffer_length,
&dev->u.dsound.in->has_buffer_length,
dev->u.dsound.in);
}
/* OSS */
static void handle_oss_per_direction(
AudiodevOssPerDirectionOptions *opdo, const char *try_poll_env,
const char *dev_env)
{
get_bool(try_poll_env, &opdo->try_poll, &opdo->has_try_poll);
get_str(dev_env, &opdo->dev, &opdo->has_dev);
get_bytes_to_usecs("QEMU_OSS_FRAGSIZE",
&opdo->buffer_length, &opdo->has_buffer_length,
qapi_AudiodevOssPerDirectionOptions_base(opdo));
get_int("QEMU_OSS_NFRAGS", &opdo->buffer_count,
&opdo->has_buffer_count);
}
static void handle_oss(Audiodev *dev)
{
AudiodevOssOptions *oopt = &dev->u.oss;
handle_oss_per_direction(oopt->in, "QEMU_AUDIO_ADC_TRY_POLL",
"QEMU_OSS_ADC_DEV");
handle_oss_per_direction(oopt->out, "QEMU_AUDIO_DAC_TRY_POLL",
"QEMU_OSS_DAC_DEV");
get_bool("QEMU_OSS_MMAP", &oopt->try_mmap, &oopt->has_try_mmap);
get_bool("QEMU_OSS_EXCLUSIVE", &oopt->exclusive, &oopt->has_exclusive);
get_int("QEMU_OSS_POLICY", &oopt->dsp_policy, &oopt->has_dsp_policy);
}
/* pulseaudio */
static void handle_pa_per_direction(
AudiodevPaPerDirectionOptions *ppdo, const char *env)
{
get_str(env, &ppdo->name, &ppdo->has_name);
}
static void handle_pa(Audiodev *dev)
{
handle_pa_per_direction(dev->u.pa.in, "QEMU_PA_SOURCE");
handle_pa_per_direction(dev->u.pa.out, "QEMU_PA_SINK");
get_samples_to_usecs(
"QEMU_PA_SAMPLES", &dev->u.pa.in->buffer_length,
&dev->u.pa.in->has_buffer_length,
qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.in));
get_samples_to_usecs(
"QEMU_PA_SAMPLES", &dev->u.pa.out->buffer_length,
&dev->u.pa.out->has_buffer_length,
qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.out));
get_str("QEMU_PA_SERVER", &dev->u.pa.server, &dev->u.pa.has_server);
}
/* SDL */
static void handle_sdl(Audiodev *dev)
{
/* SDL is output only */
get_samples_to_usecs("QEMU_SDL_SAMPLES", &dev->u.sdl.out->buffer_length,
&dev->u.sdl.out->has_buffer_length, dev->u.sdl.out);
}
/* wav */
static void handle_wav(Audiodev *dev)
{
get_int("QEMU_WAV_FREQUENCY",
&dev->u.wav.out->frequency, &dev->u.wav.out->has_frequency);
get_fmt("QEMU_WAV_FORMAT", &dev->u.wav.out->format,
&dev->u.wav.out->has_format);
get_int("QEMU_WAV_DAC_FIXED_CHANNELS",
&dev->u.wav.out->channels, &dev->u.wav.out->has_channels);
get_str("QEMU_WAV_PATH", &dev->u.wav.path, &dev->u.wav.has_path);
}
/* general */
static void handle_per_direction(
AudiodevPerDirectionOptions *pdo, const char *prefix)
{
char buf[64];
size_t len = strlen(prefix);
memcpy(buf, prefix, len);
strcpy(buf + len, "FIXED_SETTINGS");
get_bool(buf, &pdo->fixed_settings, &pdo->has_fixed_settings);
strcpy(buf + len, "FIXED_FREQ");
get_int(buf, &pdo->frequency, &pdo->has_frequency);
strcpy(buf + len, "FIXED_FMT");
get_fmt(buf, &pdo->format, &pdo->has_format);
strcpy(buf + len, "FIXED_CHANNELS");
get_int(buf, &pdo->channels, &pdo->has_channels);
strcpy(buf + len, "VOICES");
get_int(buf, &pdo->voices, &pdo->has_voices);
}
static AudiodevListEntry *legacy_opt(const char *drvname)
{
AudiodevListEntry *e = g_malloc0(sizeof(AudiodevListEntry));
e->dev = g_malloc0(sizeof(Audiodev));
e->dev->id = g_strdup(drvname);
e->dev->driver = qapi_enum_parse(
&AudiodevDriver_lookup, drvname, -1, &error_abort);
audio_create_pdos(e->dev);
handle_per_direction(audio_get_pdo_in(e->dev), "QEMU_AUDIO_ADC_");
handle_per_direction(audio_get_pdo_out(e->dev), "QEMU_AUDIO_DAC_");
/* Original description: Timer period in HZ (0 - use lowest possible) */
get_int("QEMU_AUDIO_TIMER_PERIOD",
&e->dev->timer_period, &e->dev->has_timer_period);
if (e->dev->has_timer_period && e->dev->timer_period) {
e->dev->timer_period = NANOSECONDS_PER_SECOND / 1000 /
e->dev->timer_period;
}
switch (e->dev->driver) {
case AUDIODEV_DRIVER_ALSA:
handle_alsa(e->dev);
break;
case AUDIODEV_DRIVER_COREAUDIO:
handle_coreaudio(e->dev);
break;
case AUDIODEV_DRIVER_DSOUND:
handle_dsound(e->dev);
break;
case AUDIODEV_DRIVER_OSS:
handle_oss(e->dev);
break;
case AUDIODEV_DRIVER_PA:
handle_pa(e->dev);
break;
case AUDIODEV_DRIVER_SDL:
handle_sdl(e->dev);
break;
case AUDIODEV_DRIVER_WAV:
handle_wav(e->dev);
break;
default:
break;
}
return e;
}
AudiodevListHead audio_handle_legacy_opts(void)
{
const char *drvname = getenv("QEMU_AUDIO_DRV");
AudiodevListHead head = QSIMPLEQ_HEAD_INITIALIZER(head);
if (drvname) {
AudiodevListEntry *e;
audio_driver *driver = audio_driver_lookup(drvname);
if (!driver) {
dolog("Unknown audio driver `%s'\n", drvname);
exit(1);
}
e = legacy_opt(drvname);
QSIMPLEQ_INSERT_TAIL(&head, e, next);
} else {
for (int i = 0; audio_prio_list[i]; i++) {
audio_driver *driver = audio_driver_lookup(audio_prio_list[i]);
if (driver && driver->can_be_default) {
AudiodevListEntry *e = legacy_opt(driver->name);
QSIMPLEQ_INSERT_TAIL(&head, e, next);
}
}
if (QSIMPLEQ_EMPTY(&head)) {
dolog("Internal error: no default audio driver available\n");
exit(1);
}
}
return head;
}
/* visitor to print -audiodev option */
typedef struct {
Visitor visitor;
bool comma;
GList *path;
} LegacyPrintVisitor;
static void lv_start_struct(Visitor *v, const char *name, void **obj,
size_t size, Error **errp)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
lv->path = g_list_append(lv->path, g_strdup(name));
}
static void lv_end_struct(Visitor *v, void **obj)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
lv->path = g_list_delete_link(lv->path, g_list_last(lv->path));
}
static void lv_print_key(Visitor *v, const char *name)
{
GList *e;
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
if (lv->comma) {
putchar(',');
} else {
lv->comma = true;
}
for (e = lv->path; e; e = e->next) {
if (e->data) {
printf("%s.", (const char *) e->data);
}
}
printf("%s=", name);
}
static void lv_type_int64(Visitor *v, const char *name, int64_t *obj,
Error **errp)
{
lv_print_key(v, name);
printf("%" PRIi64, *obj);
}
static void lv_type_uint64(Visitor *v, const char *name, uint64_t *obj,
Error **errp)
{
lv_print_key(v, name);
printf("%" PRIu64, *obj);
}
static void lv_type_bool(Visitor *v, const char *name, bool *obj, Error **errp)
{
lv_print_key(v, name);
printf("%s", *obj ? "on" : "off");
}
static void lv_type_str(Visitor *v, const char *name, char **obj, Error **errp)
{
const char *str = *obj;
lv_print_key(v, name);
while (*str) {
if (*str == ',') {
putchar(',');
}
putchar(*str++);
}
}
static void lv_complete(Visitor *v, void *opaque)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
assert(lv->path == NULL);
}
static void lv_free(Visitor *v)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
g_list_free_full(lv->path, g_free);
g_free(lv);
}
static Visitor *legacy_visitor_new(void)
{
LegacyPrintVisitor *lv = g_malloc0(sizeof(LegacyPrintVisitor));
lv->visitor.start_struct = lv_start_struct;
lv->visitor.end_struct = lv_end_struct;
/* lists not supported */
lv->visitor.type_int64 = lv_type_int64;
lv->visitor.type_uint64 = lv_type_uint64;
lv->visitor.type_bool = lv_type_bool;
lv->visitor.type_str = lv_type_str;
lv->visitor.type = VISITOR_OUTPUT;
lv->visitor.complete = lv_complete;
lv->visitor.free = lv_free;
return &lv->visitor;
}
void audio_legacy_help(void)
{
AudiodevListHead head;
AudiodevListEntry *e;
printf("Environment variable based configuration deprecated.\n");
printf("Please use the new -audiodev option.\n");
head = audio_handle_legacy_opts();
printf("\nEquivalent -audiodev to your current environment variables:\n");
if (!getenv("QEMU_AUDIO_DRV")) {
printf("(Since you didn't specify QEMU_AUDIO_DRV, I'll list all "
"possibilities)\n");
}
QSIMPLEQ_FOREACH(e, &head, next) {
Visitor *v;
Audiodev *dev = e->dev;
printf("-audiodev ");
v = legacy_visitor_new();
visit_type_Audiodev(v, NULL, &dev, &error_abort);
visit_free(v);
printf("\n");
}
audio_free_audiodev_list(&head);
}

View File

@@ -299,42 +299,11 @@ static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
return NULL;
}
AudiodevPerDirectionOptions *glue(audio_get_pdo_, TYPE)(Audiodev *dev)
{
switch (dev->driver) {
case AUDIODEV_DRIVER_NONE:
return dev->u.none.TYPE;
case AUDIODEV_DRIVER_ALSA:
return qapi_AudiodevAlsaPerDirectionOptions_base(dev->u.alsa.TYPE);
case AUDIODEV_DRIVER_COREAUDIO:
return qapi_AudiodevCoreaudioPerDirectionOptions_base(
dev->u.coreaudio.TYPE);
case AUDIODEV_DRIVER_DSOUND:
return dev->u.dsound.TYPE;
case AUDIODEV_DRIVER_OSS:
return qapi_AudiodevOssPerDirectionOptions_base(dev->u.oss.TYPE);
case AUDIODEV_DRIVER_PA:
return qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.TYPE);
case AUDIODEV_DRIVER_SDL:
return dev->u.sdl.TYPE;
case AUDIODEV_DRIVER_SPICE:
return dev->u.spice.TYPE;
case AUDIODEV_DRIVER_WAV:
return dev->u.wav.TYPE;
case AUDIODEV_DRIVER__MAX:
break;
}
abort();
}
static HW *glue (audio_pcm_hw_add_, TYPE) (struct audsettings *as)
{
HW *hw;
AudioState *s = &glob_audio_state;
AudiodevPerDirectionOptions *pdo = glue(audio_get_pdo_, TYPE)(s->dev);
if (pdo->fixed_settings) {
if (glue (conf.fixed_, TYPE).enabled && glue (conf.fixed_, TYPE).greedy) {
hw = glue (audio_pcm_hw_add_new_, TYPE) (as);
if (hw) {
return hw;
@@ -362,11 +331,9 @@ static SW *glue (audio_pcm_create_voice_pair_, TYPE) (
SW *sw;
HW *hw;
struct audsettings hw_as;
AudioState *s = &glob_audio_state;
AudiodevPerDirectionOptions *pdo = glue(audio_get_pdo_, TYPE)(s->dev);
if (pdo->fixed_settings) {
hw_as = audiodev_to_audsettings(pdo);
if (glue (conf.fixed_, TYPE).enabled) {
hw_as = glue (conf.fixed_, TYPE).settings;
}
else {
hw_as = *as;
@@ -431,7 +398,6 @@ SW *glue (AUD_open_, TYPE) (
)
{
AudioState *s = &glob_audio_state;
AudiodevPerDirectionOptions *pdo = glue(audio_get_pdo_, TYPE)(s->dev);
if (audio_bug(__func__, !card || !name || !callback_fn || !as)) {
dolog ("card=%p name=%p callback_fn=%p as=%p\n",
@@ -456,7 +422,7 @@ SW *glue (AUD_open_, TYPE) (
return sw;
}
if (!pdo->fixed_settings && sw) {
if (!glue (conf.fixed_, TYPE).enabled && sw) {
glue (AUD_close_, TYPE) (card, sw);
sw = NULL;
}

View File

@@ -24,20 +24,20 @@ int waveformat_from_audio_settings (WAVEFORMATEX *wfx,
wfx->cbSize = 0;
switch (as->fmt) {
case AUDIO_FORMAT_S8:
case AUDIO_FORMAT_U8:
case AUD_FMT_S8:
case AUD_FMT_U8:
wfx->wBitsPerSample = 8;
break;
case AUDIO_FORMAT_S16:
case AUDIO_FORMAT_U16:
case AUD_FMT_S16:
case AUD_FMT_U16:
wfx->wBitsPerSample = 16;
wfx->nAvgBytesPerSec <<= 1;
wfx->nBlockAlign <<= 1;
break;
case AUDIO_FORMAT_S32:
case AUDIO_FORMAT_U32:
case AUD_FMT_S32:
case AUD_FMT_U32:
wfx->wBitsPerSample = 32;
wfx->nAvgBytesPerSec <<= 2;
wfx->nBlockAlign <<= 2;
@@ -85,15 +85,15 @@ int waveformat_to_audio_settings (WAVEFORMATEX *wfx,
switch (wfx->wBitsPerSample) {
case 8:
as->fmt = AUDIO_FORMAT_U8;
as->fmt = AUD_FMT_U8;
break;
case 16:
as->fmt = AUDIO_FORMAT_S16;
as->fmt = AUD_FMT_S16;
break;
case 32:
as->fmt = AUDIO_FORMAT_S32;
as->fmt = AUD_FMT_S32;
break;
default:

View File

@@ -36,6 +36,11 @@
#define MAC_OS_X_VERSION_10_6 1060
#endif
typedef struct {
int buffer_frames;
int nbuffers;
} CoreaudioConf;
typedef struct coreaudioVoiceOut {
HWVoiceOut hw;
pthread_mutex_t mutex;
@@ -502,9 +507,7 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
int err;
const char *typ = "playback";
AudioValueRange frameRange;
Audiodev *dev = drv_opaque;
AudiodevCoreaudioPerDirectionOptions *cpdo = dev->u.coreaudio.out;
int frames;
CoreaudioConf *conf = drv_opaque;
/* create mutex */
err = pthread_mutex_init(&core->mutex, NULL);
@@ -535,17 +538,16 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
return -1;
}
frames = audio_buffer_frames(
qapi_AudiodevCoreaudioPerDirectionOptions_base(cpdo), as, 11610);
if (frameRange.mMinimum > frames) {
if (frameRange.mMinimum > conf->buffer_frames) {
core->audioDevicePropertyBufferFrameSize = (UInt32) frameRange.mMinimum;
dolog ("warning: Upsizing Buffer Frames to %f\n", frameRange.mMinimum);
} else if (frameRange.mMaximum < frames) {
}
else if (frameRange.mMaximum < conf->buffer_frames) {
core->audioDevicePropertyBufferFrameSize = (UInt32) frameRange.mMaximum;
dolog ("warning: Downsizing Buffer Frames to %f\n", frameRange.mMaximum);
}
else {
core->audioDevicePropertyBufferFrameSize = frames;
core->audioDevicePropertyBufferFrameSize = conf->buffer_frames;
}
/* set Buffer Frame Size */
@@ -566,8 +568,7 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
"Could not get device buffer frame size\n");
return -1;
}
hw->samples = (cpdo->has_buffer_count ? cpdo->buffer_count : 4) *
core->audioDevicePropertyBufferFrameSize;
hw->samples = conf->nbuffers * core->audioDevicePropertyBufferFrameSize;
/* get StreamFormat */
status = coreaudio_get_streamformat(core->outputDeviceID,
@@ -679,15 +680,40 @@ static int coreaudio_ctl_out (HWVoiceOut *hw, int cmd, ...)
return 0;
}
static void *coreaudio_audio_init(Audiodev *dev)
static CoreaudioConf glob_conf = {
.buffer_frames = 512,
.nbuffers = 4,
};
static void *coreaudio_audio_init (void)
{
return dev;
CoreaudioConf *conf = g_malloc(sizeof(CoreaudioConf));
*conf = glob_conf;
return conf;
}
static void coreaudio_audio_fini (void *opaque)
{
g_free(opaque);
}
static struct audio_option coreaudio_options[] = {
{
.name = "BUFFER_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.buffer_frames,
.descr = "Size of the buffer in frames"
},
{
.name = "BUFFER_COUNT",
.tag = AUD_OPT_INT,
.valp = &glob_conf.nbuffers,
.descr = "Number of buffers"
},
{ /* End of list */ }
};
static struct audio_pcm_ops coreaudio_pcm_ops = {
.init_out = coreaudio_init_out,
.fini_out = coreaudio_fini_out,
@@ -699,6 +725,7 @@ static struct audio_pcm_ops coreaudio_pcm_ops = {
static struct audio_driver coreaudio_audio_driver = {
.name = "coreaudio",
.descr = "CoreAudio http://developer.apple.com/audio/coreaudio.html",
.options = coreaudio_options,
.init = coreaudio_audio_init,
.fini = coreaudio_audio_fini,
.pcm_ops = &coreaudio_pcm_ops,

View File

@@ -167,18 +167,17 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
dsound *s = drv_opaque;
WAVEFORMATEX wfx;
struct audsettings obt_as;
DSoundConf *conf = &s->conf;
#ifdef DSBTYPE_IN
const char *typ = "ADC";
DSoundVoiceIn *ds = (DSoundVoiceIn *) hw;
DSCBUFFERDESC bd;
DSCBCAPS bc;
AudiodevPerDirectionOptions *pdo = s->dev->u.dsound.in;
#else
const char *typ = "DAC";
DSoundVoiceOut *ds = (DSoundVoiceOut *) hw;
DSBUFFERDESC bd;
DSBCAPS bc;
AudiodevPerDirectionOptions *pdo = s->dev->u.dsound.out;
#endif
if (!s->FIELD2) {
@@ -194,8 +193,8 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
memset (&bd, 0, sizeof (bd));
bd.dwSize = sizeof (bd);
bd.lpwfxFormat = &wfx;
bd.dwBufferBytes = audio_buffer_bytes(pdo, as, 92880);
#ifdef DSBTYPE_IN
bd.dwBufferBytes = conf->bufsize_in;
hr = IDirectSoundCapture_CreateCaptureBuffer (
s->dsound_capture,
&bd,
@@ -204,6 +203,7 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
);
#else
bd.dwFlags = DSBCAPS_STICKYFOCUS | DSBCAPS_GETCURRENTPOSITION2;
bd.dwBufferBytes = conf->bufsize_out;
hr = IDirectSound_CreateSoundBuffer (
s->dsound,
&bd,

View File

@@ -32,7 +32,6 @@
#define AUDIO_CAP "dsound"
#include "audio_int.h"
#include "qemu/host-utils.h"
#include <windows.h>
#include <mmsystem.h>
@@ -43,11 +42,17 @@
/* #define DEBUG_DSOUND */
typedef struct {
int bufsize_in;
int bufsize_out;
int latency_millis;
} DSoundConf;
typedef struct {
LPDIRECTSOUND dsound;
LPDIRECTSOUNDCAPTURE dsound_capture;
struct audsettings settings;
Audiodev *dev;
DSoundConf conf;
} dsound;
typedef struct {
@@ -243,9 +248,9 @@ static void GCC_FMT_ATTR (3, 4) dsound_logerr2 (
dsound_log_hresult (hr);
}
static uint64_t usecs_to_bytes(struct audio_pcm_info *info, uint32_t usecs)
static DWORD millis_to_bytes (struct audio_pcm_info *info, DWORD millis)
{
return muldiv64(usecs, info->bytes_per_second, 1000000);
return (millis * info->bytes_per_second) / 1000;
}
#ifdef DEBUG_DSOUND
@@ -473,7 +478,7 @@ static int dsound_run_out (HWVoiceOut *hw, int live)
LPVOID p1, p2;
int bufsize;
dsound *s = ds->s;
AudiodevDsoundOptions *dso = &s->dev->u.dsound;
DSoundConf *conf = &s->conf;
if (!dsb) {
dolog ("Attempt to run empty with playback buffer\n");
@@ -496,14 +501,14 @@ static int dsound_run_out (HWVoiceOut *hw, int live)
len = live << hwshift;
if (ds->first_time) {
if (dso->latency) {
if (conf->latency_millis) {
DWORD cur_blat;
cur_blat = audio_ring_dist (wpos, ppos, bufsize);
ds->first_time = 0;
old_pos = wpos;
old_pos +=
usecs_to_bytes(&hw->info, dso->latency) - cur_blat;
millis_to_bytes (&hw->info, conf->latency_millis) - cur_blat;
old_pos %= bufsize;
old_pos &= ~hw->info.align;
}
@@ -742,6 +747,12 @@ static int dsound_run_in (HWVoiceIn *hw)
return decr;
}
static DSoundConf glob_conf = {
.bufsize_in = 16384,
.bufsize_out = 16384,
.latency_millis = 10
};
static void dsound_audio_fini (void *opaque)
{
HRESULT hr;
@@ -772,22 +783,13 @@ static void dsound_audio_fini (void *opaque)
g_free(s);
}
static void *dsound_audio_init(Audiodev *dev)
static void *dsound_audio_init (void)
{
int err;
HRESULT hr;
dsound *s = g_malloc0(sizeof(dsound));
AudiodevDsoundOptions *dso;
assert(dev->driver == AUDIODEV_DRIVER_DSOUND);
s->dev = dev;
dso = &dev->u.dsound;
if (!dso->has_latency) {
dso->has_latency = true;
dso->latency = 10000; /* 10 ms */
}
s->conf = glob_conf;
hr = CoInitialize (NULL);
if (FAILED (hr)) {
dsound_logerr (hr, "Could not initialize COM\n");
@@ -852,6 +854,28 @@ static void *dsound_audio_init(Audiodev *dev)
return s;
}
static struct audio_option dsound_options[] = {
{
.name = "LATENCY_MILLIS",
.tag = AUD_OPT_INT,
.valp = &glob_conf.latency_millis,
.descr = "(undocumented)"
},
{
.name = "BUFSIZE_OUT",
.tag = AUD_OPT_INT,
.valp = &glob_conf.bufsize_out,
.descr = "(undocumented)"
},
{
.name = "BUFSIZE_IN",
.tag = AUD_OPT_INT,
.valp = &glob_conf.bufsize_in,
.descr = "(undocumented)"
},
{ /* End of list */ }
};
static struct audio_pcm_ops dsound_pcm_ops = {
.init_out = dsound_init_out,
.fini_out = dsound_fini_out,
@@ -869,6 +893,7 @@ static struct audio_pcm_ops dsound_pcm_ops = {
static struct audio_driver dsound_audio_driver = {
.name = "dsound",
.descr = "DirectSound http://wikipedia.org/wiki/DirectSound",
.options = dsound_options,
.init = dsound_audio_init,
.fini = dsound_audio_fini,
.pcm_ops = &dsound_pcm_ops,

View File

@@ -136,7 +136,7 @@ static int no_ctl_in (HWVoiceIn *hw, int cmd, ...)
return 0;
}
static void *no_audio_init(Audiodev *dev)
static void *no_audio_init (void)
{
return &no_audio_init;
}
@@ -163,6 +163,7 @@ static struct audio_pcm_ops no_pcm_ops = {
static struct audio_driver no_audio_driver = {
.name = "none",
.descr = "Timer based audio emulation",
.options = NULL,
.init = no_audio_init,
.fini = no_audio_fini,
.pcm_ops = &no_pcm_ops,

View File

@@ -37,6 +37,16 @@
#define USE_DSP_POLICY
#endif
typedef struct OSSConf {
int try_mmap;
int nfrags;
int fragsize;
const char *devpath_out;
const char *devpath_in;
int exclusive;
int policy;
} OSSConf;
typedef struct OSSVoiceOut {
HWVoiceOut hw;
void *pcm_buf;
@@ -46,7 +56,7 @@ typedef struct OSSVoiceOut {
int fragsize;
int mmapped;
int pending;
Audiodev *dev;
OSSConf *conf;
} OSSVoiceOut;
typedef struct OSSVoiceIn {
@@ -55,12 +65,12 @@ typedef struct OSSVoiceIn {
int fd;
int nfrags;
int fragsize;
Audiodev *dev;
OSSConf *conf;
} OSSVoiceIn;
struct oss_params {
int freq;
int fmt;
audfmt_e fmt;
int nchannels;
int nfrags;
int fragsize;
@@ -138,16 +148,16 @@ static int oss_write (SWVoiceOut *sw, void *buf, int len)
return audio_pcm_sw_write (sw, buf, len);
}
static int aud_to_ossfmt (AudioFormat fmt, int endianness)
static int aud_to_ossfmt (audfmt_e fmt, int endianness)
{
switch (fmt) {
case AUDIO_FORMAT_S8:
case AUD_FMT_S8:
return AFMT_S8;
case AUDIO_FORMAT_U8:
case AUD_FMT_U8:
return AFMT_U8;
case AUDIO_FORMAT_S16:
case AUD_FMT_S16:
if (endianness) {
return AFMT_S16_BE;
}
@@ -155,7 +165,7 @@ static int aud_to_ossfmt (AudioFormat fmt, int endianness)
return AFMT_S16_LE;
}
case AUDIO_FORMAT_U16:
case AUD_FMT_U16:
if (endianness) {
return AFMT_U16_BE;
}
@@ -172,37 +182,37 @@ static int aud_to_ossfmt (AudioFormat fmt, int endianness)
}
}
static int oss_to_audfmt (int ossfmt, AudioFormat *fmt, int *endianness)
static int oss_to_audfmt (int ossfmt, audfmt_e *fmt, int *endianness)
{
switch (ossfmt) {
case AFMT_S8:
*endianness = 0;
*fmt = AUDIO_FORMAT_S8;
*fmt = AUD_FMT_S8;
break;
case AFMT_U8:
*endianness = 0;
*fmt = AUDIO_FORMAT_U8;
*fmt = AUD_FMT_U8;
break;
case AFMT_S16_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AFMT_U16_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
case AFMT_S16_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AFMT_U16_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
default:
@@ -252,25 +262,19 @@ static int oss_get_version (int fd, int *version, const char *typ)
}
#endif
static int oss_open(int in, struct oss_params *req, audsettings *as,
struct oss_params *obt, int *pfd, Audiodev *dev)
static int oss_open (int in, struct oss_params *req,
struct oss_params *obt, int *pfd, OSSConf* conf)
{
AudiodevOssOptions *oopts = &dev->u.oss;
AudiodevOssPerDirectionOptions *opdo = in ? oopts->in : oopts->out;
int fd;
int oflags = (oopts->has_exclusive && oopts->exclusive) ? O_EXCL : 0;
int oflags = conf->exclusive ? O_EXCL : 0;
audio_buf_info abinfo;
int fmt, freq, nchannels;
int setfragment = 1;
const char *dspname = opdo->has_dev ? opdo->dev : "/dev/dsp";
const char *dspname = in ? conf->devpath_in : conf->devpath_out;
const char *typ = in ? "ADC" : "DAC";
#ifdef USE_DSP_POLICY
int policy = oopts->has_dsp_policy ? oopts->dsp_policy : 5;
#endif
/* Kludge needed to have working mmap on Linux */
oflags |= (oopts->has_try_mmap && oopts->try_mmap) ?
O_RDWR : (in ? O_RDONLY : O_WRONLY);
oflags |= conf->try_mmap ? O_RDWR : (in ? O_RDONLY : O_WRONLY);
fd = open (dspname, oflags | O_NONBLOCK);
if (-1 == fd) {
@@ -281,9 +285,6 @@ static int oss_open(int in, struct oss_params *req, audsettings *as,
freq = req->freq;
nchannels = req->nchannels;
fmt = req->fmt;
req->nfrags = opdo->has_buffer_count ? opdo->buffer_count : 4;
req->fragsize = audio_buffer_bytes(
qapi_AudiodevOssPerDirectionOptions_base(opdo), as, 23220);
if (ioctl (fd, SNDCTL_DSP_SAMPLESIZE, &fmt)) {
oss_logerr2 (errno, typ, "Failed to set sample size %d\n", req->fmt);
@@ -307,18 +308,18 @@ static int oss_open(int in, struct oss_params *req, audsettings *as,
}
#ifdef USE_DSP_POLICY
if (policy >= 0) {
if (conf->policy >= 0) {
int version;
if (!oss_get_version (fd, &version, typ)) {
trace_oss_version(version);
if (version >= 0x040000) {
int policy2 = policy;
if (ioctl(fd, SNDCTL_DSP_POLICY, &policy2)) {
int policy = conf->policy;
if (ioctl (fd, SNDCTL_DSP_POLICY, &policy)) {
oss_logerr2 (errno, typ,
"Failed to set timing policy to %d\n",
policy);
conf->policy);
goto err;
}
setfragment = 0;
@@ -499,18 +500,19 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
int endianness;
int err;
int fd;
AudioFormat effective_fmt;
audfmt_e effective_fmt;
struct audsettings obt_as;
Audiodev *dev = drv_opaque;
AudiodevOssOptions *oopts = &dev->u.oss;
OSSConf *conf = drv_opaque;
oss->fd = -1;
req.fmt = aud_to_ossfmt (as->fmt, as->endianness);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.fragsize = conf->fragsize;
req.nfrags = conf->nfrags;
if (oss_open(0, &req, as, &obt, &fd, dev)) {
if (oss_open (0, &req, &obt, &fd, conf)) {
return -1;
}
@@ -537,7 +539,7 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
hw->samples = (obt.nfrags * obt.fragsize) >> hw->info.shift;
oss->mmapped = 0;
if (oopts->has_try_mmap && oopts->try_mmap) {
if (conf->try_mmap) {
oss->pcm_buf = mmap (
NULL,
hw->samples << hw->info.shift,
@@ -595,7 +597,7 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
}
oss->fd = fd;
oss->dev = dev;
oss->conf = conf;
return 0;
}
@@ -603,12 +605,16 @@ static int oss_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
int trig;
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
AudiodevOssPerDirectionOptions *opdo = oss->dev->u.oss.out;
switch (cmd) {
case VOICE_ENABLE:
{
bool poll_mode = opdo->try_poll;
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
ldebug ("enabling voice\n");
if (poll_mode) {
@@ -661,16 +667,18 @@ static int oss_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
int endianness;
int err;
int fd;
AudioFormat effective_fmt;
audfmt_e effective_fmt;
struct audsettings obt_as;
Audiodev *dev = drv_opaque;
OSSConf *conf = drv_opaque;
oss->fd = -1;
req.fmt = aud_to_ossfmt (as->fmt, as->endianness);
req.freq = as->freq;
req.nchannels = as->nchannels;
if (oss_open(1, &req, as, &obt, &fd, dev)) {
req.fragsize = conf->fragsize;
req.nfrags = conf->nfrags;
if (oss_open (1, &req, &obt, &fd, conf)) {
return -1;
}
@@ -704,7 +712,7 @@ static int oss_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
}
oss->fd = fd;
oss->dev = dev;
oss->conf = conf;
return 0;
}
@@ -795,12 +803,16 @@ static int oss_read (SWVoiceIn *sw, void *buf, int size)
static int oss_ctl_in (HWVoiceIn *hw, int cmd, ...)
{
OSSVoiceIn *oss = (OSSVoiceIn *) hw;
AudiodevOssPerDirectionOptions *opdo = oss->dev->u.oss.out;
switch (cmd) {
case VOICE_ENABLE:
{
bool poll_mode = opdo->try_poll;
va_list ap;
int poll_mode;
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
if (poll_mode) {
oss_poll_in (hw);
@@ -820,36 +832,82 @@ static int oss_ctl_in (HWVoiceIn *hw, int cmd, ...)
return 0;
}
static void oss_init_per_direction(AudiodevOssPerDirectionOptions *opdo)
static OSSConf glob_conf = {
.try_mmap = 0,
.nfrags = 4,
.fragsize = 4096,
.devpath_out = "/dev/dsp",
.devpath_in = "/dev/dsp",
.exclusive = 0,
.policy = 5
};
static void *oss_audio_init (void)
{
if (!opdo->has_try_poll) {
opdo->try_poll = true;
opdo->has_try_poll = true;
}
}
OSSConf *conf = g_malloc(sizeof(OSSConf));
*conf = glob_conf;
static void *oss_audio_init(Audiodev *dev)
{
AudiodevOssOptions *oopts;
assert(dev->driver == AUDIODEV_DRIVER_OSS);
oopts = &dev->u.oss;
oss_init_per_direction(oopts->in);
oss_init_per_direction(oopts->out);
if (access(oopts->in->has_dev ? oopts->in->dev : "/dev/dsp",
R_OK | W_OK) < 0 ||
access(oopts->out->has_dev ? oopts->out->dev : "/dev/dsp",
R_OK | W_OK) < 0) {
if (access(conf->devpath_in, R_OK | W_OK) < 0 ||
access(conf->devpath_out, R_OK | W_OK) < 0) {
g_free(conf);
return NULL;
}
return dev;
return conf;
}
static void oss_audio_fini (void *opaque)
{
g_free(opaque);
}
static struct audio_option oss_options[] = {
{
.name = "FRAGSIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.fragsize,
.descr = "Fragment size in bytes"
},
{
.name = "NFRAGS",
.tag = AUD_OPT_INT,
.valp = &glob_conf.nfrags,
.descr = "Number of fragments"
},
{
.name = "MMAP",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.try_mmap,
.descr = "Try using memory mapped access"
},
{
.name = "DAC_DEV",
.tag = AUD_OPT_STR,
.valp = &glob_conf.devpath_out,
.descr = "Path to DAC device"
},
{
.name = "ADC_DEV",
.tag = AUD_OPT_STR,
.valp = &glob_conf.devpath_in,
.descr = "Path to ADC device"
},
{
.name = "EXCLUSIVE",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.exclusive,
.descr = "Open device in exclusive mode (vmix won't work)"
},
#ifdef USE_DSP_POLICY
{
.name = "POLICY",
.tag = AUD_OPT_INT,
.valp = &glob_conf.policy,
.descr = "Set the timing policy of the device, -1 to use fragment mode",
},
#endif
{ /* End of list */ }
};
static struct audio_pcm_ops oss_pcm_ops = {
.init_out = oss_init_out,
.fini_out = oss_fini_out,
@@ -867,6 +925,7 @@ static struct audio_pcm_ops oss_pcm_ops = {
static struct audio_driver oss_audio_driver = {
.name = "oss",
.descr = "OSS http://www.opensound.com",
.options = oss_options,
.init = oss_audio_init,
.fini = oss_audio_fini,
.pcm_ops = &oss_pcm_ops,

View File

@@ -2,7 +2,6 @@
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "audio.h"
#include "qapi/opts-visitor.h"
#include <pulse/pulseaudio.h>
@@ -11,7 +10,14 @@
#include "audio_pt_int.h"
typedef struct {
Audiodev *dev;
int samples;
char *server;
char *sink;
char *source;
} PAConf;
typedef struct {
PAConf conf;
pa_threaded_mainloop *mainloop;
pa_context *context;
} paaudio;
@@ -26,7 +32,6 @@ typedef struct {
void *pcm_buf;
struct audio_pt pt;
paaudio *g;
int samples;
} PAVoiceOut;
typedef struct {
@@ -41,7 +46,6 @@ typedef struct {
const void *read_data;
size_t read_index, read_length;
paaudio *g;
int samples;
} PAVoiceIn;
static void qpa_audio_fini(void *opaque);
@@ -223,7 +227,7 @@ static void *qpa_thread_out (void *arg)
}
}
decr = to_mix = audio_MIN(pa->live, pa->samples >> 5);
decr = to_mix = audio_MIN (pa->live, pa->g->conf.samples >> 2);
rpos = pa->rpos;
if (audio_pt_unlock(&pa->pt, __func__)) {
@@ -315,7 +319,7 @@ static void *qpa_thread_in (void *arg)
}
}
incr = to_grab = audio_MIN(pa->dead, pa->samples >> 5);
incr = to_grab = audio_MIN (pa->dead, pa->g->conf.samples >> 2);
wpos = pa->wpos;
if (audio_pt_unlock(&pa->pt, __func__)) {
@@ -381,21 +385,21 @@ static int qpa_read (SWVoiceIn *sw, void *buf, int len)
return audio_pcm_sw_read (sw, buf, len);
}
static pa_sample_format_t audfmt_to_pa (AudioFormat afmt, int endianness)
static pa_sample_format_t audfmt_to_pa (audfmt_e afmt, int endianness)
{
int format;
switch (afmt) {
case AUDIO_FORMAT_S8:
case AUDIO_FORMAT_U8:
case AUD_FMT_S8:
case AUD_FMT_U8:
format = PA_SAMPLE_U8;
break;
case AUDIO_FORMAT_S16:
case AUDIO_FORMAT_U16:
case AUD_FMT_S16:
case AUD_FMT_U16:
format = endianness ? PA_SAMPLE_S16BE : PA_SAMPLE_S16LE;
break;
case AUDIO_FORMAT_S32:
case AUDIO_FORMAT_U32:
case AUD_FMT_S32:
case AUD_FMT_U32:
format = endianness ? PA_SAMPLE_S32BE : PA_SAMPLE_S32LE;
break;
default:
@@ -406,26 +410,26 @@ static pa_sample_format_t audfmt_to_pa (AudioFormat afmt, int endianness)
return format;
}
static AudioFormat pa_to_audfmt (pa_sample_format_t fmt, int *endianness)
static audfmt_e pa_to_audfmt (pa_sample_format_t fmt, int *endianness)
{
switch (fmt) {
case PA_SAMPLE_U8:
return AUDIO_FORMAT_U8;
return AUD_FMT_U8;
case PA_SAMPLE_S16BE:
*endianness = 1;
return AUDIO_FORMAT_S16;
return AUD_FMT_S16;
case PA_SAMPLE_S16LE:
*endianness = 0;
return AUDIO_FORMAT_S16;
return AUD_FMT_S16;
case PA_SAMPLE_S32BE:
*endianness = 1;
return AUDIO_FORMAT_S32;
return AUD_FMT_S32;
case PA_SAMPLE_S32LE:
*endianness = 0;
return AUDIO_FORMAT_S32;
return AUD_FMT_S32;
default:
dolog ("Internal logic error: Bad pa_sample_format %d\n", fmt);
return AUDIO_FORMAT_U8;
return AUD_FMT_U8;
}
}
@@ -542,15 +546,17 @@ static int qpa_init_out(HWVoiceOut *hw, struct audsettings *as,
struct audsettings obt_as = *as;
PAVoiceOut *pa = (PAVoiceOut *) hw;
paaudio *g = pa->g = drv_opaque;
AudiodevPaOptions *popts = &g->dev->u.pa;
AudiodevPaPerDirectionOptions *ppdo = popts->out;
ss.format = audfmt_to_pa (as->fmt, as->endianness);
ss.channels = as->nchannels;
ss.rate = as->freq;
ba.tlength = pa_usec_to_bytes(ppdo->latency, &ss);
ba.minreq = -1;
/*
* qemu audio tick runs at 100 Hz (by default), so processing
* data chunks worth 10 ms of sound should be a good fit.
*/
ba.tlength = pa_usec_to_bytes (10 * 1000, &ss);
ba.minreq = pa_usec_to_bytes (5 * 1000, &ss);
ba.maxlength = -1;
ba.prebuf = -1;
@@ -560,7 +566,7 @@ static int qpa_init_out(HWVoiceOut *hw, struct audsettings *as,
g,
"qemu",
PA_STREAM_PLAYBACK,
ppdo->has_name ? ppdo->name : NULL,
g->conf.sink,
&ss,
NULL, /* channel map */
&ba, /* buffering attributes */
@@ -572,9 +578,7 @@ static int qpa_init_out(HWVoiceOut *hw, struct audsettings *as,
}
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = pa->samples = audio_buffer_samples(
qapi_AudiodevPaPerDirectionOptions_base(ppdo),
&obt_as, ppdo->buffer_length);
hw->samples = g->conf.samples;
pa->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
pa->rpos = hw->rpos;
if (!pa->pcm_buf) {
@@ -605,32 +609,24 @@ static int qpa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
{
int error;
pa_sample_spec ss;
pa_buffer_attr ba;
struct audsettings obt_as = *as;
PAVoiceIn *pa = (PAVoiceIn *) hw;
paaudio *g = pa->g = drv_opaque;
AudiodevPaOptions *popts = &g->dev->u.pa;
AudiodevPaPerDirectionOptions *ppdo = popts->in;
ss.format = audfmt_to_pa (as->fmt, as->endianness);
ss.channels = as->nchannels;
ss.rate = as->freq;
ba.fragsize = pa_usec_to_bytes(ppdo->latency, &ss);
ba.maxlength = -1;
ba.minreq = -1;
ba.prebuf = -1;
obt_as.fmt = pa_to_audfmt (ss.format, &obt_as.endianness);
pa->stream = qpa_simple_new (
g,
"qemu",
PA_STREAM_RECORD,
ppdo->has_name ? ppdo->name : NULL,
g->conf.source,
&ss,
NULL, /* channel map */
&ba, /* buffering attributes */
NULL, /* buffering attributes */
&error
);
if (!pa->stream) {
@@ -639,9 +635,7 @@ static int qpa_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
}
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = pa->samples = audio_buffer_samples(
qapi_AudiodevPaPerDirectionOptions_base(ppdo),
&obt_as, ppdo->buffer_length);
hw->samples = g->conf.samples;
pa->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
pa->wpos = hw->wpos;
if (!pa->pcm_buf) {
@@ -813,54 +807,15 @@ static int qpa_ctl_in (HWVoiceIn *hw, int cmd, ...)
return 0;
}
static int qpa_validate_per_direction_opts(Audiodev *dev,
AudiodevPaPerDirectionOptions *pdo)
/* common */
static PAConf glob_conf = {
.samples = 4096,
};
static void *qpa_audio_init (void)
{
if (!pdo->has_buffer_length) {
pdo->has_buffer_length = true;
pdo->buffer_length = 46440;
}
if (!pdo->has_latency) {
pdo->has_latency = true;
pdo->latency = 15000;
}
return 1;
}
static void *qpa_audio_init(Audiodev *dev)
{
paaudio *g;
AudiodevPaOptions *popts = &dev->u.pa;
const char *server;
if (!popts->has_server) {
char pidfile[64];
char *runtime;
struct stat st;
runtime = getenv("XDG_RUNTIME_DIR");
if (!runtime) {
return NULL;
}
snprintf(pidfile, sizeof(pidfile), "%s/pulse/pid", runtime);
if (stat(pidfile, &st) != 0) {
return NULL;
}
}
assert(dev->driver == AUDIODEV_DRIVER_PA);
g = g_malloc(sizeof(paaudio));
server = popts->has_server ? popts->server : NULL;
if (!qpa_validate_per_direction_opts(dev, popts->in)) {
goto fail;
}
if (!qpa_validate_per_direction_opts(dev, popts->out)) {
goto fail;
}
g->dev = dev;
paaudio *g = g_malloc(sizeof(paaudio));
g->conf = glob_conf;
g->mainloop = NULL;
g->context = NULL;
@@ -870,14 +825,14 @@ static void *qpa_audio_init(Audiodev *dev)
}
g->context = pa_context_new (pa_threaded_mainloop_get_api (g->mainloop),
server);
g->conf.server);
if (!g->context) {
goto fail;
}
pa_context_set_state_callback (g->context, context_state_cb, g);
if (pa_context_connect(g->context, server, 0, NULL) < 0) {
if (pa_context_connect (g->context, g->conf.server, 0, NULL) < 0) {
qpa_logerr (pa_context_errno (g->context),
"pa_context_connect() failed\n");
goto fail;
@@ -940,6 +895,34 @@ static void qpa_audio_fini (void *opaque)
g_free(g);
}
struct audio_option qpa_options[] = {
{
.name = "SAMPLES",
.tag = AUD_OPT_INT,
.valp = &glob_conf.samples,
.descr = "buffer size in samples"
},
{
.name = "SERVER",
.tag = AUD_OPT_STR,
.valp = &glob_conf.server,
.descr = "server address"
},
{
.name = "SINK",
.tag = AUD_OPT_STR,
.valp = &glob_conf.sink,
.descr = "sink device name"
},
{
.name = "SOURCE",
.tag = AUD_OPT_STR,
.valp = &glob_conf.source,
.descr = "source device name"
},
{ /* End of list */ }
};
static struct audio_pcm_ops qpa_pcm_ops = {
.init_out = qpa_init_out,
.fini_out = qpa_fini_out,
@@ -957,6 +940,7 @@ static struct audio_pcm_ops qpa_pcm_ops = {
static struct audio_driver pa_audio_driver = {
.name = "pa",
.descr = "http://www.pulseaudio.org/",
.options = qpa_options,
.init = qpa_audio_init,
.fini = qpa_audio_fini,
.pcm_ops = &qpa_pcm_ops,

View File

@@ -38,17 +38,31 @@
#define AUDIO_CAP "sdl"
#include "audio_int.h"
#define USE_SEMAPHORE (SDL_MAJOR_VERSION < 2)
typedef struct SDLVoiceOut {
HWVoiceOut hw;
int live;
#if USE_SEMAPHORE
int rpos;
#endif
int decr;
} SDLVoiceOut;
static struct {
int nb_samples;
} conf = {
.nb_samples = 1024
};
static struct SDLAudioState {
int exit;
#if USE_SEMAPHORE
SDL_mutex *mutex;
SDL_sem *sem;
#endif
int initialized;
bool driver_created;
Audiodev *dev;
} glob_sdl;
typedef struct SDLAudioState SDLAudioState;
@@ -63,19 +77,79 @@ static void GCC_FMT_ATTR (1, 2) sdl_logerr (const char *fmt, ...)
AUD_log (AUDIO_CAP, "Reason: %s\n", SDL_GetError ());
}
static int aud_to_sdlfmt (AudioFormat fmt)
static int sdl_lock (SDLAudioState *s, const char *forfn)
{
#if USE_SEMAPHORE
if (SDL_LockMutex (s->mutex)) {
sdl_logerr ("SDL_LockMutex for %s failed\n", forfn);
return -1;
}
#else
SDL_LockAudio();
#endif
return 0;
}
static int sdl_unlock (SDLAudioState *s, const char *forfn)
{
#if USE_SEMAPHORE
if (SDL_UnlockMutex (s->mutex)) {
sdl_logerr ("SDL_UnlockMutex for %s failed\n", forfn);
return -1;
}
#else
SDL_UnlockAudio();
#endif
return 0;
}
static int sdl_post (SDLAudioState *s, const char *forfn)
{
#if USE_SEMAPHORE
if (SDL_SemPost (s->sem)) {
sdl_logerr ("SDL_SemPost for %s failed\n", forfn);
return -1;
}
#endif
return 0;
}
#if USE_SEMAPHORE
static int sdl_wait (SDLAudioState *s, const char *forfn)
{
if (SDL_SemWait (s->sem)) {
sdl_logerr ("SDL_SemWait for %s failed\n", forfn);
return -1;
}
return 0;
}
#endif
static int sdl_unlock_and_post (SDLAudioState *s, const char *forfn)
{
if (sdl_unlock (s, forfn)) {
return -1;
}
return sdl_post (s, forfn);
}
static int aud_to_sdlfmt (audfmt_e fmt)
{
switch (fmt) {
case AUDIO_FORMAT_S8:
case AUD_FMT_S8:
return AUDIO_S8;
case AUDIO_FORMAT_U8:
case AUD_FMT_U8:
return AUDIO_U8;
case AUDIO_FORMAT_S16:
case AUD_FMT_S16:
return AUDIO_S16LSB;
case AUDIO_FORMAT_U16:
case AUD_FMT_U16:
return AUDIO_U16LSB;
default:
@@ -87,37 +161,37 @@ static int aud_to_sdlfmt (AudioFormat fmt)
}
}
static int sdl_to_audfmt(int sdlfmt, AudioFormat *fmt, int *endianness)
static int sdl_to_audfmt(int sdlfmt, audfmt_e *fmt, int *endianness)
{
switch (sdlfmt) {
case AUDIO_S8:
*endianness = 0;
*fmt = AUDIO_FORMAT_S8;
*fmt = AUD_FMT_S8;
break;
case AUDIO_U8:
*endianness = 0;
*fmt = AUDIO_FORMAT_U8;
*fmt = AUD_FMT_U8;
break;
case AUDIO_S16LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AUDIO_U16LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
case AUDIO_S16MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AUDIO_U16MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
default:
@@ -169,9 +243,9 @@ static int sdl_open (SDL_AudioSpec *req, SDL_AudioSpec *obt)
static void sdl_close (SDLAudioState *s)
{
if (s->initialized) {
SDL_LockAudio();
sdl_lock (s, "sdl_close");
s->exit = 1;
SDL_UnlockAudio();
sdl_unlock_and_post (s, "sdl_close");
SDL_PauseAudio (1);
SDL_CloseAudio ();
s->initialized = 0;
@@ -184,36 +258,76 @@ static void sdl_callback (void *opaque, Uint8 *buf, int len)
SDLAudioState *s = &glob_sdl;
HWVoiceOut *hw = &sdl->hw;
int samples = len >> hw->info.shift;
int to_mix, decr;
if (s->exit || !sdl->live) {
if (s->exit) {
return;
}
/* dolog ("in callback samples=%d live=%d\n", samples, sdl->live); */
while (samples) {
int to_mix, decr;
to_mix = audio_MIN(samples, sdl->live);
decr = to_mix;
while (to_mix) {
int chunk = audio_MIN(to_mix, hw->samples - hw->rpos);
struct st_sample *src = hw->mix_buf + hw->rpos;
/* dolog ("in callback samples=%d\n", samples); */
#if USE_SEMAPHORE
sdl_wait (s, "sdl_callback");
if (s->exit) {
return;
}
/* dolog ("in callback to_mix %d, chunk %d\n", to_mix, chunk); */
hw->clip(buf, src, chunk);
hw->rpos = (hw->rpos + chunk) % hw->samples;
to_mix -= chunk;
buf += chunk << hw->info.shift;
if (sdl_lock (s, "sdl_callback")) {
return;
}
if (audio_bug(__func__, sdl->live < 0 || sdl->live > hw->samples)) {
dolog ("sdl->live=%d hw->samples=%d\n",
sdl->live, hw->samples);
return;
}
if (!sdl->live) {
goto again;
}
#else
if (s->exit || !sdl->live) {
break;
}
#endif
/* dolog ("in callback live=%d\n", live); */
to_mix = audio_MIN (samples, sdl->live);
decr = to_mix;
while (to_mix) {
int chunk = audio_MIN (to_mix, hw->samples - hw->rpos);
struct st_sample *src = hw->mix_buf + hw->rpos;
/* dolog ("in callback to_mix %d, chunk %d\n", to_mix, chunk); */
hw->clip (buf, src, chunk);
#if USE_SEMAPHORE
sdl->rpos = (sdl->rpos + chunk) % hw->samples;
#else
hw->rpos = (hw->rpos + chunk) % hw->samples;
#endif
to_mix -= chunk;
buf += chunk << hw->info.shift;
}
samples -= decr;
sdl->live -= decr;
sdl->decr += decr;
#if USE_SEMAPHORE
again:
if (sdl_unlock (s, "sdl_callback")) {
return;
}
#endif
}
samples -= decr;
sdl->live -= decr;
sdl->decr += decr;
/* dolog ("done len=%d\n", len); */
#if (SDL_MAJOR_VERSION >= 2)
/* SDL2 does not clear the remaining buffer for us, so do it on our own */
if (samples) {
memset(buf, 0, samples << hw->info.shift);
}
#endif
}
static int sdl_write_out (SWVoiceOut *sw, void *buf, int len)
@@ -225,8 +339,11 @@ static int sdl_run_out (HWVoiceOut *hw, int live)
{
int decr;
SDLVoiceOut *sdl = (SDLVoiceOut *) hw;
SDLAudioState *s = &glob_sdl;
SDL_LockAudio();
if (sdl_lock (s, "sdl_run_out")) {
return 0;
}
if (sdl->decr > live) {
ldebug ("sdl->decr %d live %d sdl->live %d\n",
@@ -238,10 +355,19 @@ static int sdl_run_out (HWVoiceOut *hw, int live)
decr = audio_MIN (sdl->decr, live);
sdl->decr -= decr;
#if USE_SEMAPHORE
sdl->live = live - decr;
hw->rpos = sdl->rpos;
#else
sdl->live = live;
#endif
SDL_UnlockAudio();
if (sdl->live > 0) {
sdl_unlock_and_post (s, "sdl_run_out");
}
else {
sdl_unlock (s, "sdl_run_out");
}
return decr;
}
@@ -260,13 +386,13 @@ static int sdl_init_out(HWVoiceOut *hw, struct audsettings *as,
SDL_AudioSpec req, obt;
int endianness;
int err;
AudioFormat effective_fmt;
audfmt_e effective_fmt;
struct audsettings obt_as;
req.freq = as->freq;
req.format = aud_to_sdlfmt (as->fmt);
req.channels = as->nchannels;
req.samples = audio_buffer_samples(s->dev->u.sdl.out, as, 11610);
req.samples = conf.nb_samples;
req.callback = sdl_callback;
req.userdata = sdl;
@@ -310,7 +436,7 @@ static int sdl_ctl_out (HWVoiceOut *hw, int cmd, ...)
return 0;
}
static void *sdl_audio_init(Audiodev *dev)
static void *sdl_audio_init (void)
{
SDLAudioState *s = &glob_sdl;
if (s->driver_created) {
@@ -323,8 +449,24 @@ static void *sdl_audio_init(Audiodev *dev)
return NULL;
}
#if USE_SEMAPHORE
s->mutex = SDL_CreateMutex ();
if (!s->mutex) {
sdl_logerr ("Failed to create SDL mutex\n");
SDL_QuitSubSystem (SDL_INIT_AUDIO);
return NULL;
}
s->sem = SDL_CreateSemaphore (0);
if (!s->sem) {
sdl_logerr ("Failed to create SDL semaphore\n");
SDL_DestroyMutex (s->mutex);
SDL_QuitSubSystem (SDL_INIT_AUDIO);
return NULL;
}
#endif
s->driver_created = true;
s->dev = dev;
return s;
}
@@ -332,11 +474,24 @@ static void sdl_audio_fini (void *opaque)
{
SDLAudioState *s = opaque;
sdl_close (s);
#if USE_SEMAPHORE
SDL_DestroySemaphore (s->sem);
SDL_DestroyMutex (s->mutex);
#endif
SDL_QuitSubSystem (SDL_INIT_AUDIO);
s->driver_created = false;
s->dev = NULL;
}
static struct audio_option sdl_options[] = {
{
.name = "SAMPLES",
.tag = AUD_OPT_INT,
.valp = &conf.nb_samples,
.descr = "Size of SDL buffer in samples"
},
{ /* End of list */ }
};
static struct audio_pcm_ops sdl_pcm_ops = {
.init_out = sdl_init_out,
.fini_out = sdl_fini_out,
@@ -348,6 +503,7 @@ static struct audio_pcm_ops sdl_pcm_ops = {
static struct audio_driver sdl_audio_driver = {
.name = "sdl",
.descr = "SDL http://www.libsdl.org",
.options = sdl_options,
.init = sdl_audio_init,
.fini = sdl_audio_fini,
.pcm_ops = &sdl_pcm_ops,

View File

@@ -77,7 +77,7 @@ static const SpiceRecordInterface record_sif = {
.base.minor_version = SPICE_INTERFACE_RECORD_MINOR,
};
static void *spice_audio_init(Audiodev *dev)
static void *spice_audio_init (void)
{
if (!using_spice) {
return NULL;
@@ -130,7 +130,7 @@ static int line_out_init(HWVoiceOut *hw, struct audsettings *as,
settings.freq = SPICE_INTERFACE_PLAYBACK_FREQ;
#endif
settings.nchannels = SPICE_INTERFACE_PLAYBACK_CHAN;
settings.fmt = AUDIO_FORMAT_S16;
settings.fmt = AUD_FMT_S16;
settings.endianness = AUDIO_HOST_ENDIANNESS;
audio_pcm_init_info (&hw->info, &settings);
@@ -258,7 +258,7 @@ static int line_in_init(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
settings.freq = SPICE_INTERFACE_RECORD_FREQ;
#endif
settings.nchannels = SPICE_INTERFACE_RECORD_CHAN;
settings.fmt = AUDIO_FORMAT_S16;
settings.fmt = AUD_FMT_S16;
settings.endianness = AUDIO_HOST_ENDIANNESS;
audio_pcm_init_info (&hw->info, &settings);
@@ -373,6 +373,10 @@ static int line_in_ctl (HWVoiceIn *hw, int cmd, ...)
return 0;
}
static struct audio_option audio_options[] = {
{ /* end of list */ },
};
static struct audio_pcm_ops audio_callbacks = {
.init_out = line_out_init,
.fini_out = line_out_fini,
@@ -390,6 +394,7 @@ static struct audio_pcm_ops audio_callbacks = {
static struct audio_driver spice_audio_driver = {
.name = "spice",
.descr = "spice audio driver",
.options = audio_options,
.init = spice_audio_init,
.fini = spice_audio_fini,
.pcm_ops = &audio_callbacks,

View File

@@ -1,6 +1,6 @@
# See docs/devel/tracing.txt for syntax documentation.
# alsaaudio.c
# audio/alsaaudio.c
alsa_revents(int revents) "revents = %d"
alsa_pollout(int i, int fd) "i = %d fd = %d"
alsa_set_handler(int events, int index, int fd, int err) "events=0x%x index=%d fd=%d err=%d"
@@ -12,11 +12,6 @@ alsa_resume_out(void) "Resuming suspended output stream"
alsa_resume_in(void) "Resuming suspended input stream"
alsa_no_frames(int state) "No frames available and ALSA state is %d"
# ossaudio.c
# audio/ossaudio.c
oss_version(int version) "OSS version = 0x%x"
oss_invalid_available_size(int size, int bufsize) "Invalid available size, size=%d bufsize=%d"
# audio.c
audio_timer_start(int interval) "interval %d ms"
audio_timer_stop(void) ""
audio_timer_delayed(int interval) "interval %d ms"

View File

@@ -24,7 +24,6 @@
#include "qemu/osdep.h"
#include "qemu/host-utils.h"
#include "qemu/timer.h"
#include "qapi/opts-visitor.h"
#include "audio.h"
#define AUDIO_CAP "wav"
@@ -38,6 +37,11 @@ typedef struct WAVVoiceOut {
int total_samples;
} WAVVoiceOut;
typedef struct {
struct audsettings settings;
const char *wav_path;
} WAVConf;
static int wav_run_out (HWVoiceOut *hw, int live)
{
WAVVoiceOut *wav = (WAVVoiceOut *) hw;
@@ -108,30 +112,25 @@ static int wav_init_out(HWVoiceOut *hw, struct audsettings *as,
0x02, 0x00, 0x44, 0xac, 0x00, 0x00, 0x10, 0xb1, 0x02, 0x00, 0x04,
0x00, 0x10, 0x00, 0x64, 0x61, 0x74, 0x61, 0x00, 0x00, 0x00, 0x00
};
Audiodev *dev = drv_opaque;
AudiodevWavOptions *wopts = &dev->u.wav;
struct audsettings wav_as = audiodev_to_audsettings(dev->u.wav.out);
const char *wav_path = wopts->has_path ? wopts->path : "qemu.wav";
WAVConf *conf = drv_opaque;
struct audsettings wav_as = conf->settings;
stereo = wav_as.nchannels == 2;
switch (wav_as.fmt) {
case AUDIO_FORMAT_S8:
case AUDIO_FORMAT_U8:
case AUD_FMT_S8:
case AUD_FMT_U8:
bits16 = 0;
break;
case AUDIO_FORMAT_S16:
case AUDIO_FORMAT_U16:
case AUD_FMT_S16:
case AUD_FMT_U16:
bits16 = 1;
break;
case AUDIO_FORMAT_S32:
case AUDIO_FORMAT_U32:
case AUD_FMT_S32:
case AUD_FMT_U32:
dolog ("WAVE files can not handle 32bit formats\n");
return -1;
default:
abort();
}
hdr[34] = bits16 ? 0x10 : 0x08;
@@ -152,10 +151,10 @@ static int wav_init_out(HWVoiceOut *hw, struct audsettings *as,
le_store (hdr + 28, hw->info.freq << (bits16 + stereo), 4);
le_store (hdr + 32, 1 << (bits16 + stereo), 2);
wav->f = fopen(wav_path, "wb");
wav->f = fopen (conf->wav_path, "wb");
if (!wav->f) {
dolog ("Failed to open wave file `%s'\nReason: %s\n",
wav_path, strerror(errno));
conf->wav_path, strerror (errno));
g_free (wav->pcm_buf);
wav->pcm_buf = NULL;
return -1;
@@ -223,17 +222,54 @@ static int wav_ctl_out (HWVoiceOut *hw, int cmd, ...)
return 0;
}
static void *wav_audio_init(Audiodev *dev)
static WAVConf glob_conf = {
.settings.freq = 44100,
.settings.nchannels = 2,
.settings.fmt = AUD_FMT_S16,
.wav_path = "qemu.wav"
};
static void *wav_audio_init (void)
{
assert(dev->driver == AUDIODEV_DRIVER_WAV);
return dev;
WAVConf *conf = g_malloc(sizeof(WAVConf));
*conf = glob_conf;
return conf;
}
static void wav_audio_fini (void *opaque)
{
ldebug ("wav_fini");
g_free(opaque);
}
static struct audio_option wav_options[] = {
{
.name = "FREQUENCY",
.tag = AUD_OPT_INT,
.valp = &glob_conf.settings.freq,
.descr = "Frequency"
},
{
.name = "FORMAT",
.tag = AUD_OPT_FMT,
.valp = &glob_conf.settings.fmt,
.descr = "Format"
},
{
.name = "DAC_FIXED_CHANNELS",
.tag = AUD_OPT_INT,
.valp = &glob_conf.settings.nchannels,
.descr = "Number of channels (1 - mono, 2 - stereo)"
},
{
.name = "PATH",
.tag = AUD_OPT_STR,
.valp = &glob_conf.wav_path,
.descr = "Path to wave file"
},
{ /* End of list */ }
};
static struct audio_pcm_ops wav_pcm_ops = {
.init_out = wav_init_out,
.fini_out = wav_fini_out,
@@ -245,6 +281,7 @@ static struct audio_pcm_ops wav_pcm_ops = {
static struct audio_driver wav_audio_driver = {
.name = "wav",
.descr = "WAV renderer http://wikipedia.org/wiki/WAV",
.options = wav_options,
.init = wav_audio_init,
.fini = wav_audio_fini,
.pcm_ops = &wav_pcm_ops,

View File

@@ -38,29 +38,30 @@ static void wav_destroy (void *opaque)
uint8_t dlen[4];
uint32_t datalen = wav->bytes;
uint32_t rifflen = datalen + 36;
Monitor *mon = cur_mon;
if (wav->f) {
le_store (rlen, rifflen, 4);
le_store (dlen, datalen, 4);
if (fseek (wav->f, 4, SEEK_SET)) {
error_report("wav_destroy: rlen fseek failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: rlen fseek failed\nReason: %s\n",
strerror (errno));
goto doclose;
}
if (fwrite (rlen, 4, 1, wav->f) != 1) {
error_report("wav_destroy: rlen fwrite failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: rlen fwrite failed\nReason %s\n",
strerror (errno));
goto doclose;
}
if (fseek (wav->f, 32, SEEK_CUR)) {
error_report("wav_destroy: dlen fseek failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: dlen fseek failed\nReason %s\n",
strerror (errno));
goto doclose;
}
if (fwrite (dlen, 1, 4, wav->f) != 4) {
error_report("wav_destroy: dlen fwrite failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: dlen fwrite failed\nReason %s\n",
strerror (errno));
goto doclose;
}
doclose:
@@ -77,7 +78,8 @@ static void wav_capture (void *opaque, void *buf, int size)
WAVState *wav = opaque;
if (fwrite (buf, size, 1, wav->f) != 1) {
error_report("wav_capture: fwrite error: %s", strerror(errno));
monitor_printf (cur_mon, "wav_capture: fwrite error\nReason: %s",
strerror (errno));
}
wav->bytes += size;
}
@@ -108,6 +110,7 @@ static struct capture_ops wav_capture_ops = {
int wav_start_capture (CaptureState *s, const char *path, int freq,
int bits, int nchannels)
{
Monitor *mon = cur_mon;
WAVState *wav;
uint8_t hdr[] = {
0x52, 0x49, 0x46, 0x46, 0x00, 0x00, 0x00, 0x00, 0x57, 0x41, 0x56,
@@ -121,13 +124,13 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
CaptureVoiceOut *cap;
if (bits != 8 && bits != 16) {
error_report("incorrect bit count %d, must be 8 or 16", bits);
monitor_printf (mon, "incorrect bit count %d, must be 8 or 16\n", bits);
return -1;
}
if (nchannels != 1 && nchannels != 2) {
error_report("incorrect channel count %d, must be 1 or 2",
nchannels);
monitor_printf (mon, "incorrect channel count %d, must be 1 or 2\n",
nchannels);
return -1;
}
@@ -136,7 +139,7 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
as.freq = freq;
as.nchannels = 1 << stereo;
as.fmt = bits16 ? AUDIO_FORMAT_S16 : AUDIO_FORMAT_U8;
as.fmt = bits16 ? AUD_FMT_S16 : AUD_FMT_U8;
as.endianness = 0;
ops.notify = wav_notify;
@@ -155,8 +158,8 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
wav->f = fopen (path, "wb");
if (!wav->f) {
error_report("Failed to open wave file `%s': %s",
path, strerror(errno));
monitor_printf (mon, "Failed to open wave file `%s'\nReason: %s\n",
path, strerror (errno));
g_free (wav);
return -1;
}
@@ -167,13 +170,14 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
wav->freq = freq;
if (fwrite (hdr, sizeof (hdr), 1, wav->f) != 1) {
error_report("Failed to write header: %s", strerror(errno));
monitor_printf (mon, "Failed to write header\nReason: %s\n",
strerror (errno));
goto error_free;
}
cap = AUD_add_capture (&as, &ops, wav);
if (!cap) {
error_report("Failed to add audio capture");
monitor_printf (mon, "Failed to add audio capture\n");
goto error_free;
}
@@ -185,7 +189,8 @@ int wav_start_capture (CaptureState *s, const char *path, int freq,
error_free:
g_free (wav->path);
if (fclose (wav->f)) {
error_report("Failed to close wave file: %s", strerror(errno));
monitor_printf (mon, "Failed to close wave file\nReason: %s\n",
strerror (errno));
}
g_free (wav);
return -1;

View File

@@ -1,7 +0,0 @@
authz-obj-y += base.o
authz-obj-y += simple.o
authz-obj-y += list.o
authz-obj-y += listfile.o
authz-obj-$(CONFIG_AUTH_PAM) += pamacct.o
pamacct.o-libs = -lpam

View File

@@ -1,82 +0,0 @@
/*
* QEMU authorization framework base class
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/base.h"
#include "authz/trace.h"
bool qauthz_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZClass *cls = QAUTHZ_GET_CLASS(authz);
bool allowed;
allowed = cls->is_allowed(authz, identity, errp);
trace_qauthz_is_allowed(authz, identity, allowed);
return allowed;
}
bool qauthz_is_allowed_by_id(const char *authzid,
const char *identity,
Error **errp)
{
QAuthZ *authz;
Object *obj;
Object *container;
container = object_get_objects_root();
obj = object_resolve_path_component(container,
authzid);
if (!obj) {
error_setg(errp, "Cannot find QAuthZ object ID %s",
authzid);
return false;
}
if (!object_dynamic_cast(obj, TYPE_QAUTHZ)) {
error_setg(errp, "Object '%s' is not a QAuthZ subclass",
authzid);
return false;
}
authz = QAUTHZ(obj);
return qauthz_is_allowed(authz, identity, errp);
}
static const TypeInfo authz_info = {
.parent = TYPE_OBJECT,
.name = TYPE_QAUTHZ,
.instance_size = sizeof(QAuthZ),
.class_size = sizeof(QAuthZClass),
.abstract = true,
};
static void qauthz_register_types(void)
{
type_register_static(&authz_info);
}
type_init(qauthz_register_types)

View File

@@ -1,271 +0,0 @@
/*
* QEMU access control list authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/list.h"
#include "authz/trace.h"
#include "qom/object_interfaces.h"
#include "qapi/qapi-visit-authz.h"
static bool qauthz_list_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(authz);
QAuthZListRuleList *rules = lauthz->rules;
while (rules) {
QAuthZListRule *rule = rules->value;
QAuthZListFormat format = rule->has_format ? rule->format :
QAUTHZ_LIST_FORMAT_EXACT;
trace_qauthz_list_check_rule(authz, rule->match, identity,
format, rule->policy);
switch (format) {
case QAUTHZ_LIST_FORMAT_EXACT:
if (g_str_equal(rule->match, identity)) {
return rule->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
break;
case QAUTHZ_LIST_FORMAT_GLOB:
if (g_pattern_match_simple(rule->match, identity)) {
return rule->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
break;
default:
g_warn_if_reached();
return false;
}
rules = rules->next;
}
trace_qauthz_list_default_policy(authz, identity, lauthz->policy);
return lauthz->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
static void
qauthz_list_prop_set_policy(Object *obj,
int value,
Error **errp G_GNUC_UNUSED)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
lauthz->policy = value;
}
static int
qauthz_list_prop_get_policy(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
return lauthz->policy;
}
static void
qauthz_list_prop_get_rules(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
visit_type_QAuthZListRuleList(v, name, &lauthz->rules, errp);
}
static void
qauthz_list_prop_set_rules(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
QAuthZListRuleList *oldrules;
oldrules = lauthz->rules;
visit_type_QAuthZListRuleList(v, name, &lauthz->rules, errp);
qapi_free_QAuthZListRuleList(oldrules);
}
static void
qauthz_list_finalize(Object *obj)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
qapi_free_QAuthZListRuleList(lauthz->rules);
}
static void
qauthz_list_class_init(ObjectClass *oc, void *data)
{
QAuthZClass *authz = QAUTHZ_CLASS(oc);
object_class_property_add_enum(oc, "policy",
"QAuthZListPolicy",
&QAuthZListPolicy_lookup,
qauthz_list_prop_get_policy,
qauthz_list_prop_set_policy,
NULL);
object_class_property_add(oc, "rules", "QAuthZListRule",
qauthz_list_prop_get_rules,
qauthz_list_prop_set_rules,
NULL, NULL, NULL);
authz->is_allowed = qauthz_list_is_allowed;
}
QAuthZList *qauthz_list_new(const char *id,
QAuthZListPolicy policy,
Error **errp)
{
return QAUTHZ_LIST(
object_new_with_props(TYPE_QAUTHZ_LIST,
object_get_objects_root(),
id, errp,
"policy", QAuthZListPolicy_str(policy),
NULL));
}
ssize_t qauthz_list_append_rule(QAuthZList *auth,
const char *match,
QAuthZListPolicy policy,
QAuthZListFormat format,
Error **errp)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *tmp;
size_t i = 0;
rule = g_new0(QAuthZListRule, 1);
rule->policy = policy;
rule->match = g_strdup(match);
rule->format = format;
rule->has_format = true;
tmp = g_new0(QAuthZListRuleList, 1);
tmp->value = rule;
rules = auth->rules;
if (rules) {
while (rules->next) {
i++;
rules = rules->next;
}
rules->next = tmp;
return i + 1;
} else {
auth->rules = tmp;
return 0;
}
}
ssize_t qauthz_list_insert_rule(QAuthZList *auth,
const char *match,
QAuthZListPolicy policy,
QAuthZListFormat format,
size_t index,
Error **errp)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *tmp;
size_t i = 0;
rule = g_new0(QAuthZListRule, 1);
rule->policy = policy;
rule->match = g_strdup(match);
rule->format = format;
rule->has_format = true;
tmp = g_new0(QAuthZListRuleList, 1);
tmp->value = rule;
rules = auth->rules;
if (rules && index > 0) {
while (rules->next && i < (index - 1)) {
i++;
rules = rules->next;
}
tmp->next = rules->next;
rules->next = tmp;
return i + 1;
} else {
tmp->next = auth->rules;
auth->rules = tmp;
return 0;
}
}
ssize_t qauthz_list_delete_rule(QAuthZList *auth, const char *match)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *prev;
size_t i = 0;
prev = NULL;
rules = auth->rules;
while (rules) {
rule = rules->value;
if (g_str_equal(rule->match, match)) {
if (prev) {
prev->next = rules->next;
} else {
auth->rules = rules->next;
}
rules->next = NULL;
qapi_free_QAuthZListRuleList(rules);
return i;
}
prev = rules;
rules = rules->next;
i++;
}
return -1;
}
static const TypeInfo qauthz_list_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_LIST,
.instance_size = sizeof(QAuthZList),
.instance_finalize = qauthz_list_finalize,
.class_size = sizeof(QAuthZListClass),
.class_init = qauthz_list_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_list_register_types(void)
{
type_register_static(&qauthz_list_info);
}
type_init(qauthz_list_register_types);

View File

@@ -1,283 +0,0 @@
/*
* QEMU access control list file authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/listfile.h"
#include "authz/trace.h"
#include "qemu/error-report.h"
#include "qemu/main-loop.h"
#include "qemu/sockets.h"
#include "qemu/filemonitor.h"
#include "qom/object_interfaces.h"
#include "qapi/qapi-visit-authz.h"
#include "qapi/qmp/qjson.h"
#include "qapi/qmp/qobject.h"
#include "qapi/qmp/qerror.h"
#include "qapi/qobject-input-visitor.h"
static bool
qauthz_list_file_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(authz);
if (fauthz->list) {
return qauthz_is_allowed(fauthz->list, identity, errp);
}
return false;
}
static QAuthZ *
qauthz_list_file_load(QAuthZListFile *fauthz, Error **errp)
{
GError *err = NULL;
gchar *content = NULL;
gsize len;
QObject *obj = NULL;
QDict *pdict;
Visitor *v = NULL;
QAuthZ *ret = NULL;
trace_qauthz_list_file_load(fauthz, fauthz->filename);
if (!g_file_get_contents(fauthz->filename, &content, &len, &err)) {
error_setg(errp, "Unable to read '%s': %s",
fauthz->filename, err->message);
goto cleanup;
}
obj = qobject_from_json(content, errp);
if (!obj) {
goto cleanup;
}
pdict = qobject_to(QDict, obj);
if (!pdict) {
error_setg(errp, QERR_INVALID_PARAMETER_TYPE, "obj", "dict");
goto cleanup;
}
v = qobject_input_visitor_new(obj);
ret = (QAuthZ *)user_creatable_add_type(TYPE_QAUTHZ_LIST,
NULL, pdict, v, errp);
cleanup:
visit_free(v);
qobject_unref(obj);
if (err) {
g_error_free(err);
}
g_free(content);
return ret;
}
static void
qauthz_list_file_event(int64_t wd G_GNUC_UNUSED,
QFileMonitorEvent ev G_GNUC_UNUSED,
const char *name G_GNUC_UNUSED,
void *opaque)
{
QAuthZListFile *fauthz = opaque;
Error *err = NULL;
if (ev != QFILE_MONITOR_EVENT_MODIFIED &&
ev != QFILE_MONITOR_EVENT_CREATED) {
return;
}
object_unref(OBJECT(fauthz->list));
fauthz->list = qauthz_list_file_load(fauthz, &err);
trace_qauthz_list_file_refresh(fauthz,
fauthz->filename, fauthz->list ? 1 : 0);
if (!fauthz->list) {
error_report_err(err);
}
}
static void
qauthz_list_file_complete(UserCreatable *uc, Error **errp)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(uc);
gchar *dir = NULL, *file = NULL;
fauthz->list = qauthz_list_file_load(fauthz, errp);
if (!fauthz->refresh) {
return;
}
fauthz->file_monitor = qemu_file_monitor_new(errp);
if (!fauthz->file_monitor) {
return;
}
dir = g_path_get_dirname(fauthz->filename);
if (g_str_equal(dir, ".")) {
error_setg(errp, "Filename must be an absolute path");
goto cleanup;
}
file = g_path_get_basename(fauthz->filename);
if (g_str_equal(file, ".")) {
error_setg(errp, "Path has no trailing filename component");
goto cleanup;
}
fauthz->file_watch = qemu_file_monitor_add_watch(
fauthz->file_monitor, dir, file,
qauthz_list_file_event, fauthz, errp);
if (fauthz->file_watch < 0) {
goto cleanup;
}
cleanup:
g_free(file);
g_free(dir);
}
static void
qauthz_list_file_prop_set_filename(Object *obj,
const char *value,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
g_free(fauthz->filename);
fauthz->filename = g_strdup(value);
}
static char *
qauthz_list_file_prop_get_filename(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
return g_strdup(fauthz->filename);
}
static void
qauthz_list_file_prop_set_refresh(Object *obj,
bool value,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
fauthz->refresh = value;
}
static bool
qauthz_list_file_prop_get_refresh(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
return fauthz->refresh;
}
static void
qauthz_list_file_finalize(Object *obj)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
object_unref(OBJECT(fauthz->list));
g_free(fauthz->filename);
qemu_file_monitor_free(fauthz->file_monitor);
}
static void
qauthz_list_file_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
QAuthZClass *authz = QAUTHZ_CLASS(oc);
ucc->complete = qauthz_list_file_complete;
object_class_property_add_str(oc, "filename",
qauthz_list_file_prop_get_filename,
qauthz_list_file_prop_set_filename,
NULL);
object_class_property_add_bool(oc, "refresh",
qauthz_list_file_prop_get_refresh,
qauthz_list_file_prop_set_refresh,
NULL);
authz->is_allowed = qauthz_list_file_is_allowed;
}
static void
qauthz_list_file_init(Object *obj)
{
QAuthZListFile *authz = QAUTHZ_LIST_FILE(obj);
authz->file_watch = -1;
#ifdef CONFIG_INOTIFY1
authz->refresh = TRUE;
#endif
}
QAuthZListFile *qauthz_list_file_new(const char *id,
const char *filename,
bool refresh,
Error **errp)
{
return QAUTHZ_LIST_FILE(
object_new_with_props(TYPE_QAUTHZ_LIST_FILE,
object_get_objects_root(),
id, errp,
"filename", filename,
"refresh", refresh ? "yes" : "no",
NULL));
}
static const TypeInfo qauthz_list_file_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_LIST_FILE,
.instance_init = qauthz_list_file_init,
.instance_size = sizeof(QAuthZListFile),
.instance_finalize = qauthz_list_file_finalize,
.class_size = sizeof(QAuthZListFileClass),
.class_init = qauthz_list_file_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_list_file_register_types(void)
{
type_register_static(&qauthz_list_file_info);
}
type_init(qauthz_list_file_register_types);

View File

@@ -1,148 +0,0 @@
/*
* QEMU PAM authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/pamacct.h"
#include "authz/trace.h"
#include "qom/object_interfaces.h"
#include <security/pam_appl.h>
static bool qauthz_pam_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(authz);
const struct pam_conv pam_conversation = { 0 };
pam_handle_t *pamh = NULL;
int ret;
trace_qauthz_pam_check(authz, identity, pauthz->service);
ret = pam_start(pauthz->service,
identity,
&pam_conversation,
&pamh);
if (ret != PAM_SUCCESS) {
error_setg(errp, "Unable to start PAM transaction: %s",
pam_strerror(NULL, ret));
return false;
}
ret = pam_acct_mgmt(pamh, PAM_SILENT);
pam_end(pamh, ret);
if (ret != PAM_SUCCESS) {
error_setg(errp, "Unable to authorize user '%s': %s",
identity, pam_strerror(pamh, ret));
return false;
}
return true;
}
static void
qauthz_pam_prop_set_service(Object *obj,
const char *service,
Error **errp G_GNUC_UNUSED)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
g_free(pauthz->service);
pauthz->service = g_strdup(service);
}
static char *
qauthz_pam_prop_get_service(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
return g_strdup(pauthz->service);
}
static void
qauthz_pam_complete(UserCreatable *uc, Error **errp)
{
}
static void
qauthz_pam_finalize(Object *obj)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
g_free(pauthz->service);
}
static void
qauthz_pam_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
QAuthZClass *authz = QAUTHZ_CLASS(oc);
ucc->complete = qauthz_pam_complete;
authz->is_allowed = qauthz_pam_is_allowed;
object_class_property_add_str(oc, "service",
qauthz_pam_prop_get_service,
qauthz_pam_prop_set_service,
NULL);
}
QAuthZPAM *qauthz_pam_new(const char *id,
const char *service,
Error **errp)
{
return QAUTHZ_PAM(
object_new_with_props(TYPE_QAUTHZ_PAM,
object_get_objects_root(),
id, errp,
"service", service,
NULL));
}
static const TypeInfo qauthz_pam_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_PAM,
.instance_size = sizeof(QAuthZPAM),
.instance_finalize = qauthz_pam_finalize,
.class_size = sizeof(QAuthZPAMClass),
.class_init = qauthz_pam_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_pam_register_types(void)
{
type_register_static(&qauthz_pam_info);
}
type_init(qauthz_pam_register_types);

View File

@@ -1,115 +0,0 @@
/*
* QEMU simple authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/simple.h"
#include "authz/trace.h"
#include "qom/object_interfaces.h"
static bool qauthz_simple_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(authz);
trace_qauthz_simple_is_allowed(authz, sauthz->identity, identity);
return g_str_equal(identity, sauthz->identity);
}
static void
qauthz_simple_prop_set_identity(Object *obj,
const char *value,
Error **errp G_GNUC_UNUSED)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
g_free(sauthz->identity);
sauthz->identity = g_strdup(value);
}
static char *
qauthz_simple_prop_get_identity(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
return g_strdup(sauthz->identity);
}
static void
qauthz_simple_finalize(Object *obj)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
g_free(sauthz->identity);
}
static void
qauthz_simple_class_init(ObjectClass *oc, void *data)
{
QAuthZClass *authz = QAUTHZ_CLASS(oc);
authz->is_allowed = qauthz_simple_is_allowed;
object_class_property_add_str(oc, "identity",
qauthz_simple_prop_get_identity,
qauthz_simple_prop_set_identity,
NULL);
}
QAuthZSimple *qauthz_simple_new(const char *id,
const char *identity,
Error **errp)
{
return QAUTHZ_SIMPLE(
object_new_with_props(TYPE_QAUTHZ_SIMPLE,
object_get_objects_root(),
id, errp,
"identity", identity,
NULL));
}
static const TypeInfo qauthz_simple_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_SIMPLE,
.instance_size = sizeof(QAuthZSimple),
.instance_finalize = qauthz_simple_finalize,
.class_size = sizeof(QAuthZSimpleClass),
.class_init = qauthz_simple_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_simple_register_types(void)
{
type_register_static(&qauthz_simple_info);
}
type_init(qauthz_simple_register_types);

View File

@@ -1,18 +0,0 @@
# See docs/devel/tracing.txt for syntax documentation.
# base.c
qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d"
# simple.c
qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s"
# list.c
qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d"
qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d"
# listfile.c
qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s"
qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"
# pamacct.c
qauthz_pam_check(void *authz, const char *identity, const char *service) "AuthZ PAM %p identity=%s service=%s"

View File

@@ -4,14 +4,15 @@ common-obj-$(CONFIG_POSIX) += rng-random.o
common-obj-$(CONFIG_TPM) += tpm.o
common-obj-y += hostmem.o hostmem-ram.o
common-obj-$(CONFIG_POSIX) += hostmem-file.o
common-obj-$(CONFIG_LINUX) += hostmem-file.o
common-obj-y += cryptodev.o
common-obj-y += cryptodev-builtin.o
ifeq ($(CONFIG_VIRTIO_CRYPTO),y)
ifeq ($(CONFIG_VIRTIO),y)
common-obj-y += cryptodev-vhost.o
common-obj-$(CONFIG_VHOST_CRYPTO) += cryptodev-vhost-user.o
common-obj-$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX)) += \
cryptodev-vhost-user.o
endif
common-obj-$(CONFIG_LINUX) += hostmem-memfd.o

View File

@@ -26,7 +26,6 @@
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
#include "hw/virtio/vhost-user.h"
#include "standard-headers/linux/virtio_crypto.h"
#include "sysemu/cryptodev-vhost.h"
#include "chardev/char-fe.h"
@@ -47,7 +46,6 @@
typedef struct CryptoDevBackendVhostUser {
CryptoDevBackend parent_obj;
VhostUserState vhost_user;
CharBackend chr;
char *chr_name;
bool opened;
@@ -104,7 +102,7 @@ cryptodev_vhost_user_start(int queues,
continue;
}
options.opaque = &s->vhost_user;
options.opaque = &s->chr;
options.backend_type = VHOST_BACKEND_TYPE_USER;
options.cc = b->conf.peers.ccs[i];
s->vhost_crypto[i] = cryptodev_vhost_init(&options);
@@ -157,6 +155,7 @@ static void cryptodev_vhost_user_event(void *opaque, int event)
{
CryptoDevBackendVhostUser *s = opaque;
CryptoDevBackend *b = CRYPTODEV_BACKEND(s);
Error *err = NULL;
int queues = b->conf.peers.queues;
assert(queues < MAX_CRYPTO_QUEUE_NUM);
@@ -173,6 +172,10 @@ static void cryptodev_vhost_user_event(void *opaque, int event)
cryptodev_vhost_user_stop(queues, s);
break;
}
if (err) {
error_report_err(err);
}
}
static void cryptodev_vhost_user_init(
@@ -212,10 +215,6 @@ static void cryptodev_vhost_user_init(
}
}
if (!vhost_user_init(&s->vhost_user, &s->chr, errp)) {
return;
}
qemu_chr_fe_set_handlers(&s->chr, NULL, NULL,
cryptodev_vhost_user_event, NULL, s, NULL, true);
@@ -300,8 +299,6 @@ static void cryptodev_vhost_user_cleanup(
backend->conf.peers.ccs[i] = NULL;
}
}
vhost_user_cleanup(&s->vhost_user);
}
static void cryptodev_vhost_user_set_chardev(Object *obj,

View File

@@ -12,7 +12,6 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu-common.h"
#include "qemu/error-report.h"
#include "sysemu/hostmem.h"
#include "sysemu/sysemu.h"
#include "qom/object_interfaces.h"
@@ -32,21 +31,15 @@ typedef struct HostMemoryBackendFile HostMemoryBackendFile;
struct HostMemoryBackendFile {
HostMemoryBackend parent_obj;
bool discard_data;
char *mem_path;
uint64_t align;
bool discard_data;
bool is_pmem;
};
static void
file_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
{
#ifndef CONFIG_POSIX
error_setg(errp, "backend '%s' not supported on this host",
object_get_typename(OBJECT(backend)));
#else
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(backend);
gchar *name;
if (!backend->size) {
error_setg(errp, "can't create backend with size 0");
@@ -56,38 +49,19 @@ file_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
error_setg(errp, "mem-path property not set");
return;
}
/*
* Verify pmem file size since starting a guest with an incorrect size
* leads to confusing failures inside the guest.
*/
if (fb->is_pmem) {
Error *local_err = NULL;
uint64_t size;
size = qemu_get_pmem_size(fb->mem_path, &local_err);
if (!size) {
error_propagate(errp, local_err);
return;
}
if (backend->size > size) {
error_setg(errp, "size property %" PRIu64 " is larger than "
"pmem file \"%s\" size %" PRIu64, backend->size,
fb->mem_path, size);
return;
}
#ifndef CONFIG_LINUX
error_setg(errp, "-mem-path not supported on this host");
#else
if (!host_memory_backend_mr_inited(backend)) {
gchar *path;
backend->force_prealloc = mem_prealloc;
path = object_get_canonical_path(OBJECT(backend));
memory_region_init_ram_from_file(&backend->mr, OBJECT(backend),
path,
backend->size, fb->align, backend->share,
fb->mem_path, errp);
g_free(path);
}
backend->force_prealloc = mem_prealloc;
name = host_memory_backend_get_name(backend);
memory_region_init_ram_from_file(&backend->mr, OBJECT(backend),
name,
backend->size, fb->align,
(backend->share ? RAM_SHARED : 0) |
(fb->is_pmem ? RAM_PMEM : 0),
fb->mem_path, errp);
g_free(name);
#endif
}
@@ -104,8 +78,7 @@ static void set_mem_path(Object *o, const char *str, Error **errp)
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property 'mem-path' of %s",
object_get_typename(o));
error_setg(errp, "cannot change property value");
return;
}
g_free(fb->mem_path);
@@ -143,8 +116,7 @@ static void file_memory_backend_set_align(Object *o, Visitor *v,
uint64_t val;
if (host_memory_backend_mr_inited(backend)) {
error_setg(&local_err, "cannot change property '%s' of %s",
name, object_get_typename(o));
error_setg(&local_err, "cannot change property value");
goto out;
}
@@ -158,39 +130,6 @@ static void file_memory_backend_set_align(Object *o, Visitor *v,
error_propagate(errp, local_err);
}
static bool file_memory_backend_get_pmem(Object *o, Error **errp)
{
return MEMORY_BACKEND_FILE(o)->is_pmem;
}
static void file_memory_backend_set_pmem(Object *o, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property 'pmem' of %s.",
object_get_typename(o));
return;
}
#ifndef CONFIG_LIBPMEM
if (value) {
Error *local_err = NULL;
error_setg(&local_err,
"Lack of libpmem support while setting the 'pmem=on'"
" of %s. We can't ensure data persistence.",
object_get_typename(o));
error_propagate(errp, local_err);
return;
}
#endif
fb->is_pmem = value;
}
static void file_backend_unparent(Object *obj)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
@@ -222,9 +161,6 @@ file_backend_class_init(ObjectClass *oc, void *data)
file_memory_backend_get_align,
file_memory_backend_set_align,
NULL, NULL, &error_abort);
object_class_property_add_bool(oc, "pmem",
file_memory_backend_get_pmem, file_memory_backend_set_pmem,
&error_abort);
}
static void file_backend_instance_finalize(Object *o)

View File

@@ -44,6 +44,10 @@ memfd_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
return;
}
if (host_memory_backend_mr_inited(backend)) {
return;
}
backend->force_prealloc = mem_prealloc;
fd = qemu_memfd_create(TYPE_MEMORY_BACKEND_MEMFD, backend->size,
m->hugetlb, m->hugetlbsize, m->seal ?
@@ -53,10 +57,9 @@ memfd_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
return;
}
name = host_memory_backend_get_name(backend);
name = object_get_canonical_path(OBJECT(backend));
memory_region_init_ram_from_fd(&backend->mr, OBJECT(backend),
name, backend->size,
backend->share, fd, errp);
name, backend->size, true, fd, errp);
g_free(name);
}
@@ -128,7 +131,6 @@ memfd_backend_instance_init(Object *obj)
/* default to sealed file */
m->seal = true;
MEMORY_BACKEND(m)->share = true;
}
static void
@@ -138,29 +140,18 @@ memfd_backend_class_init(ObjectClass *oc, void *data)
bc->alloc = memfd_backend_memory_alloc;
if (qemu_memfd_check(MFD_HUGETLB)) {
object_class_property_add_bool(oc, "hugetlb",
memfd_backend_get_hugetlb,
memfd_backend_set_hugetlb,
&error_abort);
object_class_property_set_description(oc, "hugetlb",
"Use huge pages",
&error_abort);
object_class_property_add(oc, "hugetlbsize", "int",
memfd_backend_get_hugetlbsize,
memfd_backend_set_hugetlbsize,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "hugetlbsize",
"Huge pages size (ex: 2M, 1G)",
&error_abort);
}
object_class_property_add_bool(oc, "hugetlb",
memfd_backend_get_hugetlb,
memfd_backend_set_hugetlb,
&error_abort);
object_class_property_add(oc, "hugetlbsize", "int",
memfd_backend_get_hugetlbsize,
memfd_backend_set_hugetlbsize,
NULL, NULL, &error_abort);
object_class_property_add_bool(oc, "seal",
memfd_backend_get_seal,
memfd_backend_set_seal,
&error_abort);
object_class_property_set_description(oc, "seal",
"Seal growing & shrinking",
&error_abort);
}
static const TypeInfo memfd_backend_info = {
@@ -173,9 +164,7 @@ static const TypeInfo memfd_backend_info = {
static void register_types(void)
{
if (qemu_memfd_check(MFD_ALLOW_SEALING)) {
type_register_static(&memfd_backend_info);
}
type_register_static(&memfd_backend_info);
}
type_init(register_types);

View File

@@ -16,20 +16,21 @@
#define TYPE_MEMORY_BACKEND_RAM "memory-backend-ram"
static void
ram_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
{
char *name;
char *path;
if (!backend->size) {
error_setg(errp, "can't create backend with size 0");
return;
}
name = host_memory_backend_get_name(backend);
memory_region_init_ram_shared_nomigrate(&backend->mr, OBJECT(backend), name,
path = object_get_canonical_path_component(OBJECT(backend));
memory_region_init_ram_shared_nomigrate(&backend->mr, OBJECT(backend), path,
backend->size, backend->share, errp);
g_free(name);
g_free(path);
}
static void

View File

@@ -18,7 +18,6 @@
#include "qapi/visitor.h"
#include "qemu/config-file.h"
#include "qom/object_interfaces.h"
#include "qemu/mmap-alloc.h"
#ifdef CONFIG_NUMA
#include <numaif.h>
@@ -28,16 +27,6 @@ QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_BIND != MPOL_BIND);
QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_INTERLEAVE != MPOL_INTERLEAVE);
#endif
char *
host_memory_backend_get_name(HostMemoryBackend *backend)
{
if (!backend->use_canonical_path) {
return object_get_canonical_path_component(OBJECT(backend));
}
return object_get_canonical_path(OBJECT(backend));
}
static void
host_memory_backend_get_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
@@ -57,8 +46,7 @@ host_memory_backend_set_size(Object *obj, Visitor *v, const char *name,
uint64_t value;
if (host_memory_backend_mr_inited(backend)) {
error_setg(&local_err, "cannot change property %s of %s ",
name, object_get_typename(obj));
error_setg(&local_err, "cannot change property value");
goto out;
}
@@ -67,9 +55,8 @@ host_memory_backend_set_size(Object *obj, Visitor *v, const char *name,
goto out;
}
if (!value) {
error_setg(&local_err,
"property '%s' of %s doesn't take value '%" PRIu64 "'",
name, object_get_typename(obj), value);
error_setg(&local_err, "Property '%s.%s' doesn't take value '%"
PRIu64 "'", object_get_typename(obj), name, value);
goto out;
}
backend->size = value;
@@ -88,7 +75,7 @@ host_memory_backend_get_host_nodes(Object *obj, Visitor *v, const char *name,
value = find_first_bit(backend->host_nodes, MAX_NODES);
if (value == MAX_NODES) {
goto ret;
return;
}
*node = g_malloc0(sizeof(**node));
@@ -106,7 +93,6 @@ host_memory_backend_get_host_nodes(Object *obj, Visitor *v, const char *name,
node = &(*node)->next;
} while (true);
ret:
visit_type_uint16List(v, name, &host_nodes, errp);
}
@@ -116,23 +102,14 @@ host_memory_backend_set_host_nodes(Object *obj, Visitor *v, const char *name,
{
#ifdef CONFIG_NUMA
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint16List *l, *host_nodes = NULL;
uint16List *l = NULL;
visit_type_uint16List(v, name, &host_nodes, errp);
visit_type_uint16List(v, name, &l, errp);
for (l = host_nodes; l; l = l->next) {
if (l->value >= MAX_NODES) {
error_setg(errp, "Invalid host-nodes value: %d", l->value);
goto out;
}
}
for (l = host_nodes; l; l = l->next) {
while (l) {
bitmap_set(backend->host_nodes, l->value, 1);
l = l->next;
}
out:
qapi_free_uint16List(host_nodes);
#else
error_setg(errp, "NUMA node binding are not supported by this QEMU");
#endif
@@ -260,11 +237,6 @@ static void host_memory_backend_init(Object *obj)
backend->prealloc = mem_prealloc;
}
static void host_memory_backend_post_init(Object *obj)
{
object_apply_compat_props(obj);
}
bool host_memory_backend_mr_inited(HostMemoryBackend *backend)
{
/*
@@ -274,7 +246,8 @@ bool host_memory_backend_mr_inited(HostMemoryBackend *backend)
return memory_region_size(&backend->mr) != 0;
}
MemoryRegion *host_memory_backend_get_memory(HostMemoryBackend *backend)
MemoryRegion *
host_memory_backend_get_memory(HostMemoryBackend *backend, Error **errp)
{
return host_memory_backend_mr_inited(backend) ? &backend->mr : NULL;
}
@@ -289,23 +262,6 @@ bool host_memory_backend_is_mapped(HostMemoryBackend *backend)
return backend->is_mapped;
}
#ifdef __linux__
size_t host_memory_backend_pagesize(HostMemoryBackend *memdev)
{
Object *obj = OBJECT(memdev);
char *path = object_property_get_str(obj, "mem-path", NULL);
size_t pagesize = qemu_mempath_getpagesize(path);
g_free(path);
return pagesize;
}
#else
size_t host_memory_backend_pagesize(HostMemoryBackend *memdev)
{
return getpagesize();
}
#endif
static void
host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
{
@@ -395,6 +351,24 @@ host_memory_backend_can_be_deleted(UserCreatable *uc)
}
}
static char *get_id(Object *o, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
return g_strdup(backend->id);
}
static void set_id(Object *o, const char *str, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
if (backend->id) {
error_setg(errp, "cannot change property value");
return;
}
backend->id = g_strdup(str);
}
static bool host_memory_backend_get_share(Object *o, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
@@ -413,23 +387,6 @@ static void host_memory_backend_set_share(Object *o, bool value, Error **errp)
backend->share = value;
}
static bool
host_memory_backend_get_use_canonical_path(Object *obj, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
return backend->use_canonical_path;
}
static void
host_memory_backend_set_use_canonical_path(Object *obj, bool value,
Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
backend->use_canonical_path = value;
}
static void
host_memory_backend_class_init(ObjectClass *oc, void *data)
{
@@ -441,44 +398,34 @@ host_memory_backend_class_init(ObjectClass *oc, void *data)
object_class_property_add_bool(oc, "merge",
host_memory_backend_get_merge,
host_memory_backend_set_merge, &error_abort);
object_class_property_set_description(oc, "merge",
"Mark memory as mergeable", &error_abort);
object_class_property_add_bool(oc, "dump",
host_memory_backend_get_dump,
host_memory_backend_set_dump, &error_abort);
object_class_property_set_description(oc, "dump",
"Set to 'off' to exclude from core dump", &error_abort);
object_class_property_add_bool(oc, "prealloc",
host_memory_backend_get_prealloc,
host_memory_backend_set_prealloc, &error_abort);
object_class_property_set_description(oc, "prealloc",
"Preallocate memory", &error_abort);
object_class_property_add(oc, "size", "int",
host_memory_backend_get_size,
host_memory_backend_set_size,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "size",
"Size of the memory region (ex: 500M)", &error_abort);
object_class_property_add(oc, "host-nodes", "int",
host_memory_backend_get_host_nodes,
host_memory_backend_set_host_nodes,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "host-nodes",
"Binds memory to the list of NUMA host nodes", &error_abort);
object_class_property_add_enum(oc, "policy", "HostMemPolicy",
&HostMemPolicy_lookup,
host_memory_backend_get_policy,
host_memory_backend_set_policy, &error_abort);
object_class_property_set_description(oc, "policy",
"Set the NUMA policy", &error_abort);
object_class_property_add_str(oc, "id", get_id, set_id, &error_abort);
object_class_property_add_bool(oc, "share",
host_memory_backend_get_share, host_memory_backend_set_share,
&error_abort);
object_class_property_set_description(oc, "share",
"Mark the memory as private to QEMU or shared", &error_abort);
object_class_property_add_bool(oc, "x-use-canonical-path-for-ramblock-id",
host_memory_backend_get_use_canonical_path,
host_memory_backend_set_use_canonical_path, &error_abort);
}
static void host_memory_backend_finalize(Object *o)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
g_free(backend->id);
}
static const TypeInfo host_memory_backend_info = {
@@ -489,7 +436,7 @@ static const TypeInfo host_memory_backend_info = {
.class_init = host_memory_backend_class_init,
.instance_size = sizeof(HostMemoryBackend),
.instance_init = host_memory_backend_init,
.instance_post_init = host_memory_backend_post_init,
.instance_finalize = host_memory_backend_finalize,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }

View File

@@ -26,7 +26,6 @@
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/atomic.h"
#include "exec/cpu-common.h"
#include "sysemu/kvm.h"
#include "sysemu/balloon.h"
@@ -38,22 +37,16 @@
static QEMUBalloonEvent *balloon_event_fn;
static QEMUBalloonStatus *balloon_stat_fn;
static void *balloon_opaque;
static int balloon_inhibit_count;
static bool balloon_inhibited;
bool qemu_balloon_is_inhibited(void)
{
return atomic_read(&balloon_inhibit_count) > 0;
return balloon_inhibited;
}
void qemu_balloon_inhibit(bool state)
{
if (state) {
atomic_inc(&balloon_inhibit_count);
} else {
atomic_dec(&balloon_inhibit_count);
}
assert(atomic_read(&balloon_inhibit_count) >= 0);
balloon_inhibited = state;
}
static bool have_balloon(Error **errp)

1961
block.c

File diff suppressed because it is too large Load Diff

View File

@@ -1,19 +1,10 @@
block-obj-y += raw-format.o vmdk.o vpc.o
block-obj-$(CONFIG_QCOW1) += qcow.o
block-obj-$(CONFIG_VDI) += vdi.o
block-obj-$(CONFIG_CLOOP) += cloop.o
block-obj-$(CONFIG_BOCHS) += bochs.o
block-obj-$(CONFIG_VVFAT) += vvfat.o
block-obj-$(CONFIG_DMG) += dmg.o
block-obj-y += raw-format.o qcow.o vdi.o vmdk.o cloop.o bochs.o vpc.o vvfat.o dmg.o
block-obj-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o qcow2-cache.o qcow2-bitmap.o
block-obj-$(CONFIG_QED) += qed.o qed-l2-cache.o qed-table.o qed-cluster.o
block-obj-$(CONFIG_QED) += qed-check.o
block-obj-y += qed.o qed-l2-cache.o qed-table.o qed-cluster.o
block-obj-y += qed-check.o
block-obj-y += vhdx.o vhdx-endian.o vhdx-log.o
block-obj-y += quorum.o
block-obj-y += blkdebug.o blkverify.o blkreplay.o
block-obj-$(CONFIG_PARALLELS) += parallels.o
block-obj-y += blklogwrites.o
block-obj-y += parallels.o blkdebug.o blkverify.o blkreplay.o
block-obj-y += block-backend.o snapshot.o qapi.o
block-obj-$(CONFIG_WIN32) += file-win32.o win32-aio.o
block-obj-$(CONFIG_POSIX) += file-posix.o
@@ -22,8 +13,7 @@ block-obj-y += null.o mirror.o commit.o io.o create.o
block-obj-y += throttle-groups.o
block-obj-$(CONFIG_LINUX) += nvme.o
block-obj-y += nbd.o nbd-client.o
block-obj-$(CONFIG_SHEEPDOG) += sheepdog.o
block-obj-y += nbd.o nbd-client.o sheepdog.o
block-obj-$(CONFIG_LIBISCSI) += iscsi.o
block-obj-$(if $(CONFIG_LIBISCSI),y,n) += iscsi-opts.o
block-obj-$(CONFIG_LIBNFS) += nfs.o
@@ -36,7 +26,7 @@ block-obj-y += accounting.o dirty-bitmap.o
block-obj-y += write-threshold.o
block-obj-y += backup.o
block-obj-$(CONFIG_REPLICATION) += replication.o
block-obj-y += throttle.o copy-on-read.o
block-obj-y += throttle.o
block-obj-y += crypto.o
@@ -54,11 +44,8 @@ gluster.o-libs := $(GLUSTERFS_LIBS)
vxhs.o-libs := $(VXHS_LIBS)
ssh.o-cflags := $(LIBSSH2_CFLAGS)
ssh.o-libs := $(LIBSSH2_LIBS)
block-obj-dmg-bz2-$(CONFIG_BZIP2) += dmg-bz2.o
block-obj-$(if $(CONFIG_DMG),m,n) += $(block-obj-dmg-bz2-y)
block-obj-$(if $(CONFIG_BZIP2),m,n) += dmg-bz2.o
dmg-bz2.o-libs := $(BZIP2_LIBS)
block-obj-$(if $(CONFIG_LZFSE),m,n) += dmg-lzfse.o
dmg-lzfse.o-libs := $(LZFSE_LIBS)
qcow.o-libs := -lz
linux-aio.o-libs := -laio
parallels.o-cflags := $(LIBXML2_CFLAGS)

View File

@@ -27,13 +27,7 @@
#include "qemu/error-report.h"
#define BACKUP_CLUSTER_SIZE_DEFAULT (1 << 16)
typedef struct CowRequest {
int64_t start_byte;
int64_t end_byte;
QLIST_ENTRY(CowRequest) list;
CoQueue wait_queue; /* coroutines blocked on this request */
} CowRequest;
#define SLICE_TIME 100000000ULL /* ns */
typedef struct BackupBlockJob {
BlockJob common;
@@ -41,10 +35,10 @@ typedef struct BackupBlockJob {
/* bitmap for sync=incremental */
BdrvDirtyBitmap *sync_bitmap;
MirrorSyncMode sync_mode;
RateLimit limit;
BlockdevOnError on_source_error;
BlockdevOnError on_target_error;
CoRwlock flush_rwlock;
uint64_t len;
uint64_t bytes_read;
int64_t cluster_size;
bool compress;
@@ -52,14 +46,8 @@ typedef struct BackupBlockJob {
QLIST_HEAD(, CowRequest) inflight_reqs;
HBitmap *copy_bitmap;
bool use_copy_range;
int64_t copy_range_size;
bool serialize_target_writes;
} BackupBlockJob;
static const BlockJobDriver backup_job_driver;
/* See if in-flight requests overlap and wait for them to complete */
static void coroutine_fn wait_for_overlapping_requests(BackupBlockJob *job,
int64_t start,
@@ -97,101 +85,19 @@ static void cow_request_end(CowRequest *req)
qemu_co_queue_restart_all(&req->wait_queue);
}
/* Copy range to target with a bounce buffer and return the bytes copied. If
* error occurred, return a negative error number */
static int coroutine_fn backup_cow_with_bounce_buffer(BackupBlockJob *job,
int64_t start,
int64_t end,
bool is_write_notifier,
bool *error_is_read,
void **bounce_buffer)
{
int ret;
QEMUIOVector qiov;
BlockBackend *blk = job->common.blk;
int nbytes;
int read_flags = is_write_notifier ? BDRV_REQ_NO_SERIALISING : 0;
int write_flags = job->serialize_target_writes ? BDRV_REQ_SERIALISING : 0;
hbitmap_reset(job->copy_bitmap, start / job->cluster_size, 1);
nbytes = MIN(job->cluster_size, job->len - start);
if (!*bounce_buffer) {
*bounce_buffer = blk_blockalign(blk, job->cluster_size);
}
qemu_iovec_init_buf(&qiov, *bounce_buffer, nbytes);
ret = blk_co_preadv(blk, start, qiov.size, &qiov, read_flags);
if (ret < 0) {
trace_backup_do_cow_read_fail(job, start, ret);
if (error_is_read) {
*error_is_read = true;
}
goto fail;
}
if (qemu_iovec_is_zero(&qiov)) {
ret = blk_co_pwrite_zeroes(job->target, start,
qiov.size, write_flags | BDRV_REQ_MAY_UNMAP);
} else {
ret = blk_co_pwritev(job->target, start,
qiov.size, &qiov, write_flags |
(job->compress ? BDRV_REQ_WRITE_COMPRESSED : 0));
}
if (ret < 0) {
trace_backup_do_cow_write_fail(job, start, ret);
if (error_is_read) {
*error_is_read = false;
}
goto fail;
}
return nbytes;
fail:
hbitmap_set(job->copy_bitmap, start / job->cluster_size, 1);
return ret;
}
/* Copy range to target and return the bytes copied. If error occurred, return a
* negative error number. */
static int coroutine_fn backup_cow_with_offload(BackupBlockJob *job,
int64_t start,
int64_t end,
bool is_write_notifier)
{
int ret;
int nr_clusters;
BlockBackend *blk = job->common.blk;
int nbytes;
int read_flags = is_write_notifier ? BDRV_REQ_NO_SERIALISING : 0;
int write_flags = job->serialize_target_writes ? BDRV_REQ_SERIALISING : 0;
assert(QEMU_IS_ALIGNED(job->copy_range_size, job->cluster_size));
nbytes = MIN(job->copy_range_size, end - start);
nr_clusters = DIV_ROUND_UP(nbytes, job->cluster_size);
hbitmap_reset(job->copy_bitmap, start / job->cluster_size,
nr_clusters);
ret = blk_co_copy_range(blk, start, job->target, start, nbytes,
read_flags, write_flags);
if (ret < 0) {
trace_backup_do_cow_copy_range_fail(job, start, ret);
hbitmap_set(job->copy_bitmap, start / job->cluster_size,
nr_clusters);
return ret;
}
return nbytes;
}
static int coroutine_fn backup_do_cow(BackupBlockJob *job,
int64_t offset, uint64_t bytes,
bool *error_is_read,
bool is_write_notifier)
{
BlockBackend *blk = job->common.blk;
CowRequest cow_request;
struct iovec iov;
QEMUIOVector bounce_qiov;
void *bounce_buffer = NULL;
int ret = 0;
int64_t start, end; /* bytes */
void *bounce_buffer = NULL;
int n; /* bytes */
qemu_co_rwlock_rdlock(&job->flush_rwlock);
@@ -203,38 +109,60 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job,
wait_for_overlapping_requests(job, start, end);
cow_request_begin(&cow_request, job, start, end);
while (start < end) {
for (; start < end; start += job->cluster_size) {
if (!hbitmap_get(job->copy_bitmap, start / job->cluster_size)) {
trace_backup_do_cow_skip(job, start);
start += job->cluster_size;
continue; /* already copied */
}
hbitmap_reset(job->copy_bitmap, start / job->cluster_size, 1);
trace_backup_do_cow_process(job, start);
if (job->use_copy_range) {
ret = backup_cow_with_offload(job, start, end, is_write_notifier);
if (ret < 0) {
job->use_copy_range = false;
}
n = MIN(job->cluster_size, job->common.len - start);
if (!bounce_buffer) {
bounce_buffer = blk_blockalign(blk, job->cluster_size);
}
if (!job->use_copy_range) {
ret = backup_cow_with_bounce_buffer(job, start, end, is_write_notifier,
error_is_read, &bounce_buffer);
iov.iov_base = bounce_buffer;
iov.iov_len = n;
qemu_iovec_init_external(&bounce_qiov, &iov, 1);
ret = blk_co_preadv(blk, start, bounce_qiov.size, &bounce_qiov,
is_write_notifier ? BDRV_REQ_NO_SERIALISING : 0);
if (ret < 0) {
trace_backup_do_cow_read_fail(job, start, ret);
if (error_is_read) {
*error_is_read = true;
}
hbitmap_set(job->copy_bitmap, start / job->cluster_size, 1);
goto out;
}
if (buffer_is_zero(iov.iov_base, iov.iov_len)) {
ret = blk_co_pwrite_zeroes(job->target, start,
bounce_qiov.size, BDRV_REQ_MAY_UNMAP);
} else {
ret = blk_co_pwritev(job->target, start,
bounce_qiov.size, &bounce_qiov,
job->compress ? BDRV_REQ_WRITE_COMPRESSED : 0);
}
if (ret < 0) {
break;
trace_backup_do_cow_write_fail(job, start, ret);
if (error_is_read) {
*error_is_read = false;
}
hbitmap_set(job->copy_bitmap, start / job->cluster_size, 1);
goto out;
}
/* Publish progress, guest I/O counts as progress too. Note that the
* offset field is an opaque progress value, it is not a disk offset.
*/
start += ret;
job->bytes_read += ret;
job_progress_update(&job->common.job, ret);
ret = 0;
job->bytes_read += n;
job->common.offset += n;
}
out:
if (bounce_buffer) {
qemu_vfree(bounce_buffer);
}
@@ -262,6 +190,17 @@ static int coroutine_fn backup_before_write_notify(
return backup_do_cow(job, req->offset, req->bytes, NULL, true);
}
static void backup_set_speed(BlockJob *job, int64_t speed, Error **errp)
{
BackupBlockJob *s = container_of(job, BackupBlockJob, common);
if (speed < 0) {
error_setg(errp, QERR_INVALID_PARAMETER, "speed");
return;
}
ratelimit_set_speed(&s->limit, speed, SLICE_TIME);
}
static void backup_cleanup_sync_bitmap(BackupBlockJob *job, int ret)
{
BdrvDirtyBitmap *bm;
@@ -278,25 +217,25 @@ static void backup_cleanup_sync_bitmap(BackupBlockJob *job, int ret)
}
}
static void backup_commit(Job *job)
static void backup_commit(BlockJob *job)
{
BackupBlockJob *s = container_of(job, BackupBlockJob, common.job);
BackupBlockJob *s = container_of(job, BackupBlockJob, common);
if (s->sync_bitmap) {
backup_cleanup_sync_bitmap(s, 0);
}
}
static void backup_abort(Job *job)
static void backup_abort(BlockJob *job)
{
BackupBlockJob *s = container_of(job, BackupBlockJob, common.job);
BackupBlockJob *s = container_of(job, BackupBlockJob, common);
if (s->sync_bitmap) {
backup_cleanup_sync_bitmap(s, -1);
}
}
static void backup_clean(Job *job)
static void backup_clean(BlockJob *job)
{
BackupBlockJob *s = container_of(job, BackupBlockJob, common.job);
BackupBlockJob *s = container_of(job, BackupBlockJob, common);
assert(s->target);
blk_unref(s->target);
s->target = NULL;
@@ -314,7 +253,7 @@ void backup_do_checkpoint(BlockJob *job, Error **errp)
BackupBlockJob *backup_job = container_of(job, BackupBlockJob, common);
int64_t len;
assert(block_job_driver(job) == &backup_job_driver);
assert(job->driver->job_type == BLOCK_JOB_TYPE_BACKUP);
if (backup_job->sync_mode != MIRROR_SYNC_MODE_NONE) {
error_setg(errp, "The backup job only supports block checkpoint in"
@@ -322,10 +261,41 @@ void backup_do_checkpoint(BlockJob *job, Error **errp)
return;
}
len = DIV_ROUND_UP(backup_job->len, backup_job->cluster_size);
len = DIV_ROUND_UP(backup_job->common.len, backup_job->cluster_size);
hbitmap_set(backup_job->copy_bitmap, 0, len);
}
void backup_wait_for_overlapping_requests(BlockJob *job, int64_t offset,
uint64_t bytes)
{
BackupBlockJob *backup_job = container_of(job, BackupBlockJob, common);
int64_t start, end;
assert(job->driver->job_type == BLOCK_JOB_TYPE_BACKUP);
start = QEMU_ALIGN_DOWN(offset, backup_job->cluster_size);
end = QEMU_ALIGN_UP(offset + bytes, backup_job->cluster_size);
wait_for_overlapping_requests(backup_job, start, end);
}
void backup_cow_request_begin(CowRequest *req, BlockJob *job,
int64_t offset, uint64_t bytes)
{
BackupBlockJob *backup_job = container_of(job, BackupBlockJob, common);
int64_t start, end;
assert(job->driver->job_type == BLOCK_JOB_TYPE_BACKUP);
start = QEMU_ALIGN_DOWN(offset, backup_job->cluster_size);
end = QEMU_ALIGN_UP(offset + bytes, backup_job->cluster_size);
cow_request_begin(req, backup_job, start, end);
}
void backup_cow_request_end(CowRequest *req)
{
cow_request_end(req);
}
static void backup_drain(BlockJob *job)
{
BackupBlockJob *s = container_of(job, BackupBlockJob, common);
@@ -353,21 +323,37 @@ static BlockErrorAction backup_error_action(BackupBlockJob *job,
}
}
typedef struct {
int ret;
} BackupCompleteData;
static void backup_complete(BlockJob *job, void *opaque)
{
BackupCompleteData *data = opaque;
block_job_completed(job, data->ret);
g_free(data);
}
static bool coroutine_fn yield_and_check(BackupBlockJob *job)
{
uint64_t delay_ns;
if (job_is_cancelled(&job->common.job)) {
if (block_job_is_cancelled(&job->common)) {
return true;
}
/* We need to yield even for delay_ns = 0 so that bdrv_drain_all() can
* return. Without a yield, the VM would not reboot. */
delay_ns = block_job_ratelimit_get_delay(&job->common, job->bytes_read);
job->bytes_read = 0;
job_sleep_ns(&job->common.job, delay_ns);
/* we need to yield so that bdrv_drain_all() returns.
* (without, VM does not reboot)
*/
if (job->common.speed) {
uint64_t delay_ns = ratelimit_calculate_delay(&job->limit,
job->bytes_read);
job->bytes_read = 0;
block_job_sleep_ns(&job->common, delay_ns);
} else {
block_job_sleep_ns(&job->common, 0);
}
if (job_is_cancelled(&job->common.job)) {
if (block_job_is_cancelled(&job->common)) {
return true;
}
@@ -419,8 +405,7 @@ static void backup_incremental_init_copy_bitmap(BackupBlockJob *job)
break;
}
offset = bdrv_dirty_bitmap_next_zero(job->sync_bitmap, offset,
UINT64_MAX);
offset = bdrv_dirty_bitmap_next_zero(job->sync_bitmap, offset);
if (offset == -1) {
hbitmap_set(job->copy_bitmap, cluster, end - cluster);
break;
@@ -435,66 +420,64 @@ static void backup_incremental_init_copy_bitmap(BackupBlockJob *job)
bdrv_set_dirty_iter(dbi, next_cluster * job->cluster_size);
}
/* TODO job_progress_set_remaining() would make more sense */
job_progress_update(&job->common.job,
job->len - hbitmap_count(job->copy_bitmap) * job->cluster_size);
job->common.offset = job->common.len -
hbitmap_count(job->copy_bitmap) * job->cluster_size;
bdrv_dirty_iter_free(dbi);
}
static int coroutine_fn backup_run(Job *job, Error **errp)
static void coroutine_fn backup_run(void *opaque)
{
BackupBlockJob *s = container_of(job, BackupBlockJob, common.job);
BlockDriverState *bs = blk_bs(s->common.blk);
BackupBlockJob *job = opaque;
BackupCompleteData *data;
BlockDriverState *bs = blk_bs(job->common.blk);
int64_t offset, nb_clusters;
int ret = 0;
QLIST_INIT(&s->inflight_reqs);
qemu_co_rwlock_init(&s->flush_rwlock);
QLIST_INIT(&job->inflight_reqs);
qemu_co_rwlock_init(&job->flush_rwlock);
nb_clusters = DIV_ROUND_UP(s->len, s->cluster_size);
job_progress_set_remaining(job, s->len);
s->copy_bitmap = hbitmap_alloc(nb_clusters, 0);
if (s->sync_mode == MIRROR_SYNC_MODE_INCREMENTAL) {
backup_incremental_init_copy_bitmap(s);
nb_clusters = DIV_ROUND_UP(job->common.len, job->cluster_size);
job->copy_bitmap = hbitmap_alloc(nb_clusters, 0);
if (job->sync_mode == MIRROR_SYNC_MODE_INCREMENTAL) {
backup_incremental_init_copy_bitmap(job);
} else {
hbitmap_set(s->copy_bitmap, 0, nb_clusters);
hbitmap_set(job->copy_bitmap, 0, nb_clusters);
}
s->before_write.notify = backup_before_write_notify;
bdrv_add_before_write_notifier(bs, &s->before_write);
job->before_write.notify = backup_before_write_notify;
bdrv_add_before_write_notifier(bs, &job->before_write);
if (s->sync_mode == MIRROR_SYNC_MODE_NONE) {
if (job->sync_mode == MIRROR_SYNC_MODE_NONE) {
/* All bits are set in copy_bitmap to allow any cluster to be copied.
* This does not actually require them to be copied. */
while (!job_is_cancelled(job)) {
while (!block_job_is_cancelled(&job->common)) {
/* Yield until the job is cancelled. We just let our before_write
* notify callback service CoW requests. */
job_yield(job);
block_job_yield(&job->common);
}
} else if (s->sync_mode == MIRROR_SYNC_MODE_INCREMENTAL) {
ret = backup_run_incremental(s);
} else if (job->sync_mode == MIRROR_SYNC_MODE_INCREMENTAL) {
ret = backup_run_incremental(job);
} else {
/* Both FULL and TOP SYNC_MODE's require copying.. */
for (offset = 0; offset < s->len;
offset += s->cluster_size) {
for (offset = 0; offset < job->common.len;
offset += job->cluster_size) {
bool error_is_read;
int alloced = 0;
if (yield_and_check(s)) {
if (yield_and_check(job)) {
break;
}
if (s->sync_mode == MIRROR_SYNC_MODE_TOP) {
if (job->sync_mode == MIRROR_SYNC_MODE_TOP) {
int i;
int64_t n;
/* Check to see if these blocks are already in the
* backing file. */
for (i = 0; i < s->cluster_size;) {
for (i = 0; i < job->cluster_size;) {
/* bdrv_is_allocated() only returns true/false based
* on the first set of sectors it comes across that
* are are all in the same state.
@@ -503,7 +486,7 @@ static int coroutine_fn backup_run(Job *job, Error **errp)
* needed but at some point that is always the case. */
alloced =
bdrv_is_allocated(bs, offset + i,
s->cluster_size - i, &n);
job->cluster_size - i, &n);
i += n;
if (alloced || n == 0) {
@@ -521,45 +504,43 @@ static int coroutine_fn backup_run(Job *job, Error **errp)
if (alloced < 0) {
ret = alloced;
} else {
ret = backup_do_cow(s, offset, s->cluster_size,
ret = backup_do_cow(job, offset, job->cluster_size,
&error_is_read, false);
}
if (ret < 0) {
/* Depending on error action, fail now or retry cluster */
BlockErrorAction action =
backup_error_action(s, error_is_read, -ret);
backup_error_action(job, error_is_read, -ret);
if (action == BLOCK_ERROR_ACTION_REPORT) {
break;
} else {
offset -= s->cluster_size;
offset -= job->cluster_size;
continue;
}
}
}
}
notifier_with_return_remove(&s->before_write);
notifier_with_return_remove(&job->before_write);
/* wait until pending backup_do_cow() calls have completed */
qemu_co_rwlock_wrlock(&s->flush_rwlock);
qemu_co_rwlock_unlock(&s->flush_rwlock);
hbitmap_free(s->copy_bitmap);
qemu_co_rwlock_wrlock(&job->flush_rwlock);
qemu_co_rwlock_unlock(&job->flush_rwlock);
hbitmap_free(job->copy_bitmap);
return ret;
data = g_malloc(sizeof(*data));
data->ret = ret;
block_job_defer_to_main_loop(&job->common, backup_complete, data);
}
static const BlockJobDriver backup_job_driver = {
.job_driver = {
.instance_size = sizeof(BackupBlockJob),
.job_type = JOB_TYPE_BACKUP,
.free = block_job_free,
.user_resume = block_job_user_resume,
.drain = block_job_drain,
.run = backup_run,
.commit = backup_commit,
.abort = backup_abort,
.clean = backup_clean,
},
.instance_size = sizeof(BackupBlockJob),
.job_type = BLOCK_JOB_TYPE_BACKUP,
.start = backup_run,
.set_speed = backup_set_speed,
.commit = backup_commit,
.abort = backup_abort,
.clean = backup_clean,
.attached_aio_context = backup_attached_aio_context,
.drain = backup_drain,
};
@@ -572,7 +553,7 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
BlockdevOnError on_target_error,
int creation_flags,
BlockCompletionFunc *cb, void *opaque,
JobTxn *txn, Error **errp)
BlockJobTxn *txn, Error **errp)
{
int64_t len;
BlockDriverInfo bdi;
@@ -639,7 +620,7 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
goto error;
}
/* job->len is fixed, so we can't allow resize */
/* job->common.len is fixed, so we can't allow resize */
job = block_job_create(job_id, &backup_job_driver, txn, bs,
BLK_PERM_CONSISTENT_READ,
BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE |
@@ -665,9 +646,6 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
sync_bitmap : NULL;
job->compress = compress;
/* Detect image-fleecing (and similar) schemes */
job->serialize_target_writes = bdrv_chain_contains(target, bs);
/* If there is no backing file on the target, we cannot rely on COW if our
* backup cluster size is smaller than the target cluster size. Even for
* targets with a backing file, try to avoid COW if possible. */
@@ -694,17 +672,11 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
} else {
job->cluster_size = MAX(BACKUP_CLUSTER_SIZE_DEFAULT, bdi.cluster_size);
}
job->use_copy_range = true;
job->copy_range_size = MIN_NON_ZERO(blk_get_max_transfer(job->common.blk),
blk_get_max_transfer(job->target));
job->copy_range_size = MAX(job->cluster_size,
QEMU_ALIGN_UP(job->copy_range_size,
job->cluster_size));
/* Required permissions are already taken with target's blk_new() */
block_job_add_bdrv(&job->common, "target", target, 0, BLK_PERM_ALL,
&error_abort);
job->len = len;
job->common.len = len;
return &job->common;
@@ -713,8 +685,8 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
bdrv_reclaim_dirty_bitmap(bs, sync_bitmap, NULL);
}
if (job) {
backup_clean(&job->common.job);
job_early_fail(&job->common.job);
backup_clean(&job->common);
block_job_early_fail(&job->common);
}
return NULL;

View File

@@ -305,7 +305,7 @@ static void blkdebug_parse_filename(const char *filename, QDict *options,
if (c != filename) {
QString *config_path;
config_path = qstring_from_substr(filename, 0, c - filename);
config_path = qstring_from_substr(filename, 0, c - filename - 1);
qdict_put(options, "config", config_path);
}
@@ -398,11 +398,10 @@ static int blkdebug_open(BlockDriverState *bs, QDict *options, int flags,
goto out;
}
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
(BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
bs->file->bs->supported_zero_flags);
bs->supported_write_flags = BDRV_REQ_FUA &
bs->file->bs->supported_write_flags;
bs->supported_zero_flags = (BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP) &
bs->file->bs->supported_zero_flags;
ret = -EINVAL;
/* Set alignment overrides */
@@ -625,7 +624,7 @@ static int coroutine_fn blkdebug_co_pdiscard(BlockDriverState *bs,
return err;
}
return bdrv_co_pdiscard(bs->file, offset, bytes);
return bdrv_co_pdiscard(bs->file->bs, offset, bytes);
}
static int coroutine_fn blkdebug_co_block_status(BlockDriverState *bs,
@@ -811,37 +810,52 @@ static int64_t blkdebug_getlength(BlockDriverState *bs)
return bdrv_getlength(bs->file->bs);
}
static void blkdebug_refresh_filename(BlockDriverState *bs)
static void blkdebug_refresh_filename(BlockDriverState *bs, QDict *options)
{
BDRVBlkdebugState *s = bs->opaque;
QDict *opts;
const QDictEntry *e;
int ret;
bool force_json = false;
if (!bs->file->bs->exact_filename[0]) {
return;
}
for (e = qdict_first(bs->full_open_options); e;
e = qdict_next(bs->full_open_options, e))
{
/* Real child options are under "image", but "x-image" may
* contain a filename */
for (e = qdict_first(options); e; e = qdict_next(options, e)) {
if (strcmp(qdict_entry_key(e), "config") &&
strcmp(qdict_entry_key(e), "image") &&
strcmp(qdict_entry_key(e), "x-image") &&
strcmp(qdict_entry_key(e), "driver"))
strcmp(qdict_entry_key(e), "x-image"))
{
return;
force_json = true;
break;
}
}
ret = snprintf(bs->exact_filename, sizeof(bs->exact_filename),
"blkdebug:%s:%s",
s->config_file ?: "", bs->file->bs->exact_filename);
if (ret >= sizeof(bs->exact_filename)) {
/* An overflow makes the filename unusable, so do not report any */
bs->exact_filename[0] = 0;
if (force_json && !bs->file->bs->full_open_options) {
/* The config file cannot be recreated, so creating a plain filename
* is impossible */
return;
}
if (!force_json && bs->file->bs->exact_filename[0]) {
int ret = snprintf(bs->exact_filename, sizeof(bs->exact_filename),
"blkdebug:%s:%s", s->config_file ?: "",
bs->file->bs->exact_filename);
if (ret >= sizeof(bs->exact_filename)) {
/* An overflow makes the filename unusable, so do not report any */
bs->exact_filename[0] = 0;
}
}
opts = qdict_new();
qdict_put_str(opts, "driver", "blkdebug");
QINCREF(bs->file->bs->full_open_options);
qdict_put(opts, "image", bs->file->bs->full_open_options);
for (e = qdict_first(options); e; e = qdict_next(options, e)) {
if (strcmp(qdict_entry_key(e), "x-image")) {
qobject_incref(qdict_entry_value(e));
qdict_put_obj(opts, qdict_entry_key(e), qdict_entry_value(e));
}
}
bs->full_open_options = opts;
}
static void blkdebug_refresh_limits(BlockDriverState *bs, Error **errp)
@@ -874,20 +888,6 @@ static int blkdebug_reopen_prepare(BDRVReopenState *reopen_state,
return 0;
}
static const char *const blkdebug_strong_runtime_opts[] = {
"config",
"inject-error.",
"set-state.",
"align",
"max-transfer",
"opt-write-zero",
"max-write-zero",
"opt-discard",
"max-discard",
NULL
};
static BlockDriver bdrv_blkdebug = {
.format_name = "blkdebug",
.protocol_name = "blkdebug",
@@ -917,8 +917,6 @@ static BlockDriver bdrv_blkdebug = {
= blkdebug_debug_remove_breakpoint,
.bdrv_debug_resume = blkdebug_debug_resume,
.bdrv_debug_is_suspended = blkdebug_debug_is_suspended,
.strong_runtime_opts = blkdebug_strong_runtime_opts,
};
static void bdrv_blkdebug_init(void)

View File

@@ -1,532 +0,0 @@
/*
* Write logging blk driver based on blkverify and blkdebug.
*
* Copyright (c) 2017 Tuomas Tynkkynen <tuomas@tuxera.com>
* Copyright (c) 2018 Aapo Vienamo <aapo@tuxera.com>
* Copyright (c) 2018 Ari Sundholm <ari@tuxera.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/sockets.h" /* for EINPROGRESS on Windows */
#include "block/block_int.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qstring.h"
#include "qemu/cutils.h"
#include "qemu/option.h"
/* Disk format stuff - taken from Linux drivers/md/dm-log-writes.c */
#define LOG_FLUSH_FLAG (1 << 0)
#define LOG_FUA_FLAG (1 << 1)
#define LOG_DISCARD_FLAG (1 << 2)
#define LOG_MARK_FLAG (1 << 3)
#define LOG_FLAG_MASK (LOG_FLUSH_FLAG \
| LOG_FUA_FLAG \
| LOG_DISCARD_FLAG \
| LOG_MARK_FLAG)
#define WRITE_LOG_VERSION 1ULL
#define WRITE_LOG_MAGIC 0x6a736677736872ULL
/* All fields are little-endian. */
struct log_write_super {
uint64_t magic;
uint64_t version;
uint64_t nr_entries;
uint32_t sectorsize;
} QEMU_PACKED;
struct log_write_entry {
uint64_t sector;
uint64_t nr_sectors;
uint64_t flags;
uint64_t data_len;
} QEMU_PACKED;
/* End of disk format structures. */
typedef struct {
BdrvChild *log_file;
uint32_t sectorsize;
uint32_t sectorbits;
uint64_t cur_log_sector;
uint64_t nr_entries;
uint64_t update_interval;
} BDRVBlkLogWritesState;
static QemuOptsList runtime_opts = {
.name = "blklogwrites",
.head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
.desc = {
{
.name = "log-append",
.type = QEMU_OPT_BOOL,
.help = "Append to an existing log",
},
{
.name = "log-sector-size",
.type = QEMU_OPT_SIZE,
.help = "Log sector size",
},
{
.name = "log-super-update-interval",
.type = QEMU_OPT_NUMBER,
.help = "Log superblock update interval (# of write requests)",
},
{ /* end of list */ }
},
};
static inline uint32_t blk_log_writes_log2(uint32_t value)
{
assert(value > 0);
return 31 - clz32(value);
}
static inline bool blk_log_writes_sector_size_valid(uint32_t sector_size)
{
return is_power_of_2(sector_size) &&
sector_size >= sizeof(struct log_write_super) &&
sector_size >= sizeof(struct log_write_entry) &&
sector_size < (1ull << 24);
}
static uint64_t blk_log_writes_find_cur_log_sector(BdrvChild *log,
uint32_t sector_size,
uint64_t nr_entries,
Error **errp)
{
uint64_t cur_sector = 1;
uint64_t cur_idx = 0;
uint32_t sector_bits = blk_log_writes_log2(sector_size);
struct log_write_entry cur_entry;
while (cur_idx < nr_entries) {
int read_ret = bdrv_pread(log, cur_sector << sector_bits, &cur_entry,
sizeof(cur_entry));
if (read_ret < 0) {
error_setg_errno(errp, -read_ret,
"Failed to read log entry %"PRIu64, cur_idx);
return (uint64_t)-1ull;
}
if (cur_entry.flags & ~cpu_to_le64(LOG_FLAG_MASK)) {
error_setg(errp, "Invalid flags 0x%"PRIx64" in log entry %"PRIu64,
le64_to_cpu(cur_entry.flags), cur_idx);
return (uint64_t)-1ull;
}
/* Account for the sector of the entry itself */
++cur_sector;
/*
* Account for the data of the write.
* For discards, this data is not present.
*/
if (!(cur_entry.flags & cpu_to_le64(LOG_DISCARD_FLAG))) {
cur_sector += le64_to_cpu(cur_entry.nr_sectors);
}
++cur_idx;
}
return cur_sector;
}
static int blk_log_writes_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVBlkLogWritesState *s = bs->opaque;
QemuOpts *opts;
Error *local_err = NULL;
int ret;
uint64_t log_sector_size;
bool log_append;
opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
qemu_opts_absorb_qdict(opts, options, &local_err);
if (local_err) {
ret = -EINVAL;
error_propagate(errp, local_err);
goto fail;
}
/* Open the file */
bs->file = bdrv_open_child(NULL, options, "file", bs, &child_file, false,
&local_err);
if (local_err) {
ret = -EINVAL;
error_propagate(errp, local_err);
goto fail;
}
/* Open the log file */
s->log_file = bdrv_open_child(NULL, options, "log", bs, &child_file, false,
&local_err);
if (local_err) {
ret = -EINVAL;
error_propagate(errp, local_err);
goto fail;
}
log_append = qemu_opt_get_bool(opts, "log-append", false);
if (log_append) {
struct log_write_super log_sb = { 0, 0, 0, 0 };
if (qemu_opt_find(opts, "log-sector-size")) {
ret = -EINVAL;
error_setg(errp, "log-append and log-sector-size are mutually "
"exclusive");
goto fail_log;
}
/* Read log superblock or fake one for an empty log */
if (!bdrv_getlength(s->log_file->bs)) {
log_sb.magic = cpu_to_le64(WRITE_LOG_MAGIC);
log_sb.version = cpu_to_le64(WRITE_LOG_VERSION);
log_sb.nr_entries = cpu_to_le64(0);
log_sb.sectorsize = cpu_to_le32(BDRV_SECTOR_SIZE);
} else {
ret = bdrv_pread(s->log_file, 0, &log_sb, sizeof(log_sb));
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not read log superblock");
goto fail_log;
}
}
if (log_sb.magic != cpu_to_le64(WRITE_LOG_MAGIC)) {
ret = -EINVAL;
error_setg(errp, "Invalid log superblock magic");
goto fail_log;
}
if (log_sb.version != cpu_to_le64(WRITE_LOG_VERSION)) {
ret = -EINVAL;
error_setg(errp, "Unsupported log version %"PRIu64,
le64_to_cpu(log_sb.version));
goto fail_log;
}
log_sector_size = le32_to_cpu(log_sb.sectorsize);
s->cur_log_sector = 1;
s->nr_entries = 0;
if (blk_log_writes_sector_size_valid(log_sector_size)) {
s->cur_log_sector =
blk_log_writes_find_cur_log_sector(s->log_file, log_sector_size,
le64_to_cpu(log_sb.nr_entries), &local_err);
if (local_err) {
ret = -EINVAL;
error_propagate(errp, local_err);
goto fail_log;
}
s->nr_entries = le64_to_cpu(log_sb.nr_entries);
}
} else {
log_sector_size = qemu_opt_get_size(opts, "log-sector-size",
BDRV_SECTOR_SIZE);
s->cur_log_sector = 1;
s->nr_entries = 0;
}
if (!blk_log_writes_sector_size_valid(log_sector_size)) {
ret = -EINVAL;
error_setg(errp, "Invalid log sector size %"PRIu64, log_sector_size);
goto fail_log;
}
s->sectorsize = log_sector_size;
s->sectorbits = blk_log_writes_log2(log_sector_size);
s->update_interval = qemu_opt_get_number(opts, "log-super-update-interval",
4096);
if (!s->update_interval) {
ret = -EINVAL;
error_setg(errp, "Invalid log superblock update interval %"PRIu64,
s->update_interval);
goto fail_log;
}
ret = 0;
fail_log:
if (ret < 0) {
bdrv_unref_child(bs, s->log_file);
s->log_file = NULL;
}
fail:
if (ret < 0) {
bdrv_unref_child(bs, bs->file);
bs->file = NULL;
}
qemu_opts_del(opts);
return ret;
}
static void blk_log_writes_close(BlockDriverState *bs)
{
BDRVBlkLogWritesState *s = bs->opaque;
bdrv_unref_child(bs, s->log_file);
s->log_file = NULL;
}
static int64_t blk_log_writes_getlength(BlockDriverState *bs)
{
return bdrv_getlength(bs->file->bs);
}
static void blk_log_writes_child_perm(BlockDriverState *bs, BdrvChild *c,
const BdrvChildRole *role,
BlockReopenQueue *ro_q,
uint64_t perm, uint64_t shrd,
uint64_t *nperm, uint64_t *nshrd)
{
if (!c) {
*nperm = perm & DEFAULT_PERM_PASSTHROUGH;
*nshrd = (shrd & DEFAULT_PERM_PASSTHROUGH) | DEFAULT_PERM_UNCHANGED;
return;
}
if (!strcmp(c->name, "log")) {
bdrv_format_default_perms(bs, c, role, ro_q, perm, shrd, nperm, nshrd);
} else {
bdrv_filter_default_perms(bs, c, role, ro_q, perm, shrd, nperm, nshrd);
}
}
static void blk_log_writes_refresh_limits(BlockDriverState *bs, Error **errp)
{
BDRVBlkLogWritesState *s = bs->opaque;
bs->bl.request_alignment = s->sectorsize;
}
static int coroutine_fn
blk_log_writes_co_preadv(BlockDriverState *bs, uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags)
{
return bdrv_co_preadv(bs->file, offset, bytes, qiov, flags);
}
typedef struct BlkLogWritesFileReq {
BlockDriverState *bs;
uint64_t offset;
uint64_t bytes;
int file_flags;
QEMUIOVector *qiov;
int (*func)(struct BlkLogWritesFileReq *r);
int file_ret;
} BlkLogWritesFileReq;
typedef struct {
BlockDriverState *bs;
QEMUIOVector *qiov;
struct log_write_entry entry;
uint64_t zero_size;
int log_ret;
} BlkLogWritesLogReq;
static void coroutine_fn blk_log_writes_co_do_log(BlkLogWritesLogReq *lr)
{
BDRVBlkLogWritesState *s = lr->bs->opaque;
uint64_t cur_log_offset = s->cur_log_sector << s->sectorbits;
s->nr_entries++;
s->cur_log_sector +=
ROUND_UP(lr->qiov->size, s->sectorsize) >> s->sectorbits;
lr->log_ret = bdrv_co_pwritev(s->log_file, cur_log_offset, lr->qiov->size,
lr->qiov, 0);
/* Logging for the "write zeroes" operation */
if (lr->log_ret == 0 && lr->zero_size) {
cur_log_offset = s->cur_log_sector << s->sectorbits;
s->cur_log_sector +=
ROUND_UP(lr->zero_size, s->sectorsize) >> s->sectorbits;
lr->log_ret = bdrv_co_pwrite_zeroes(s->log_file, cur_log_offset,
lr->zero_size, 0);
}
/* Update super block on flush or every update interval */
if (lr->log_ret == 0 && ((lr->entry.flags & LOG_FLUSH_FLAG)
|| (s->nr_entries % s->update_interval == 0)))
{
struct log_write_super super = {
.magic = cpu_to_le64(WRITE_LOG_MAGIC),
.version = cpu_to_le64(WRITE_LOG_VERSION),
.nr_entries = cpu_to_le64(s->nr_entries),
.sectorsize = cpu_to_le32(s->sectorsize),
};
void *zeroes = g_malloc0(s->sectorsize - sizeof(super));
QEMUIOVector qiov;
qemu_iovec_init(&qiov, 2);
qemu_iovec_add(&qiov, &super, sizeof(super));
qemu_iovec_add(&qiov, zeroes, s->sectorsize - sizeof(super));
lr->log_ret =
bdrv_co_pwritev(s->log_file, 0, s->sectorsize, &qiov, 0);
if (lr->log_ret == 0) {
lr->log_ret = bdrv_co_flush(s->log_file->bs);
}
qemu_iovec_destroy(&qiov);
g_free(zeroes);
}
}
static void coroutine_fn blk_log_writes_co_do_file(BlkLogWritesFileReq *fr)
{
fr->file_ret = fr->func(fr);
}
static int coroutine_fn
blk_log_writes_co_log(BlockDriverState *bs, uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags,
int (*file_func)(BlkLogWritesFileReq *r),
uint64_t entry_flags, bool is_zero_write)
{
QEMUIOVector log_qiov;
size_t niov = qiov ? qiov->niov : 0;
BDRVBlkLogWritesState *s = bs->opaque;
BlkLogWritesFileReq fr = {
.bs = bs,
.offset = offset,
.bytes = bytes,
.file_flags = flags,
.qiov = qiov,
.func = file_func,
};
BlkLogWritesLogReq lr = {
.bs = bs,
.qiov = &log_qiov,
.entry = {
.sector = cpu_to_le64(offset >> s->sectorbits),
.nr_sectors = cpu_to_le64(bytes >> s->sectorbits),
.flags = cpu_to_le64(entry_flags),
.data_len = 0,
},
.zero_size = is_zero_write ? bytes : 0,
};
void *zeroes = g_malloc0(s->sectorsize - sizeof(lr.entry));
assert((1 << s->sectorbits) == s->sectorsize);
assert(bs->bl.request_alignment == s->sectorsize);
assert(QEMU_IS_ALIGNED(offset, bs->bl.request_alignment));
assert(QEMU_IS_ALIGNED(bytes, bs->bl.request_alignment));
qemu_iovec_init(&log_qiov, niov + 2);
qemu_iovec_add(&log_qiov, &lr.entry, sizeof(lr.entry));
qemu_iovec_add(&log_qiov, zeroes, s->sectorsize - sizeof(lr.entry));
if (qiov) {
qemu_iovec_concat(&log_qiov, qiov, 0, qiov->size);
}
blk_log_writes_co_do_file(&fr);
blk_log_writes_co_do_log(&lr);
qemu_iovec_destroy(&log_qiov);
g_free(zeroes);
if (lr.log_ret < 0) {
return lr.log_ret;
}
return fr.file_ret;
}
static int coroutine_fn
blk_log_writes_co_do_file_pwritev(BlkLogWritesFileReq *fr)
{
return bdrv_co_pwritev(fr->bs->file, fr->offset, fr->bytes,
fr->qiov, fr->file_flags);
}
static int coroutine_fn
blk_log_writes_co_do_file_pwrite_zeroes(BlkLogWritesFileReq *fr)
{
return bdrv_co_pwrite_zeroes(fr->bs->file, fr->offset, fr->bytes,
fr->file_flags);
}
static int coroutine_fn blk_log_writes_co_do_file_flush(BlkLogWritesFileReq *fr)
{
return bdrv_co_flush(fr->bs->file->bs);
}
static int coroutine_fn
blk_log_writes_co_do_file_pdiscard(BlkLogWritesFileReq *fr)
{
return bdrv_co_pdiscard(fr->bs->file, fr->offset, fr->bytes);
}
static int coroutine_fn
blk_log_writes_co_pwritev(BlockDriverState *bs, uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags)
{
return blk_log_writes_co_log(bs, offset, bytes, qiov, flags,
blk_log_writes_co_do_file_pwritev, 0, false);
}
static int coroutine_fn
blk_log_writes_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset, int bytes,
BdrvRequestFlags flags)
{
return blk_log_writes_co_log(bs, offset, bytes, NULL, flags,
blk_log_writes_co_do_file_pwrite_zeroes, 0,
true);
}
static int coroutine_fn blk_log_writes_co_flush_to_disk(BlockDriverState *bs)
{
return blk_log_writes_co_log(bs, 0, 0, NULL, 0,
blk_log_writes_co_do_file_flush,
LOG_FLUSH_FLAG, false);
}
static int coroutine_fn
blk_log_writes_co_pdiscard(BlockDriverState *bs, int64_t offset, int count)
{
return blk_log_writes_co_log(bs, offset, count, NULL, 0,
blk_log_writes_co_do_file_pdiscard,
LOG_DISCARD_FLAG, false);
}
static const char *const blk_log_writes_strong_runtime_opts[] = {
"log-append",
"log-sector-size",
NULL
};
static BlockDriver bdrv_blk_log_writes = {
.format_name = "blklogwrites",
.instance_size = sizeof(BDRVBlkLogWritesState),
.bdrv_open = blk_log_writes_open,
.bdrv_close = blk_log_writes_close,
.bdrv_getlength = blk_log_writes_getlength,
.bdrv_child_perm = blk_log_writes_child_perm,
.bdrv_refresh_limits = blk_log_writes_refresh_limits,
.bdrv_co_preadv = blk_log_writes_co_preadv,
.bdrv_co_pwritev = blk_log_writes_co_pwritev,
.bdrv_co_pwrite_zeroes = blk_log_writes_co_pwrite_zeroes,
.bdrv_co_flush_to_disk = blk_log_writes_co_flush_to_disk,
.bdrv_co_pdiscard = blk_log_writes_co_pdiscard,
.bdrv_co_block_status = bdrv_co_block_status_from_file,
.is_filter = true,
.strong_runtime_opts = blk_log_writes_strong_runtime_opts,
};
static void bdrv_blk_log_writes_init(void)
{
bdrv_register(&bdrv_blk_log_writes);
}
block_init(bdrv_blk_log_writes_init);

10
block/blkreplay.c Normal file → Executable file
View File

@@ -35,14 +35,15 @@ static int blkreplay_open(BlockDriverState *bs, QDict *options, int flags,
goto fail;
}
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED;
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED;
ret = 0;
fail:
return ret;
}
static void blkreplay_close(BlockDriverState *bs)
{
}
static int64_t blkreplay_getlength(BlockDriverState *bs)
{
return bdrv_getlength(bs->file->bs);
@@ -109,7 +110,7 @@ static int coroutine_fn blkreplay_co_pdiscard(BlockDriverState *bs,
int64_t offset, int bytes)
{
uint64_t reqid = blkreplay_next_id();
int ret = bdrv_co_pdiscard(bs->file, offset, bytes);
int ret = bdrv_co_pdiscard(bs->file->bs, offset, bytes);
block_request_create(reqid, bs, qemu_coroutine_self());
qemu_coroutine_yield();
@@ -131,6 +132,7 @@ static BlockDriver bdrv_blkreplay = {
.instance_size = 0,
.bdrv_open = blkreplay_open,
.bdrv_close = blkreplay_close,
.bdrv_child_perm = bdrv_filter_default_perms,
.bdrv_getlength = blkreplay_getlength,

View File

@@ -80,7 +80,7 @@ static void blkverify_parse_filename(const char *filename, QDict *options,
}
/* TODO Implement option pass-through and set raw.filename here */
raw_path = qstring_from_substr(filename, 0, c - filename);
raw_path = qstring_from_substr(filename, 0, c - filename - 1);
qdict_put(options, "x-raw", raw_path);
/* TODO Allow multi-level nesting and set file.filename here */
@@ -141,9 +141,6 @@ static int blkverify_open(BlockDriverState *bs, QDict *options, int flags,
goto fail;
}
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED;
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED;
ret = 0;
fail:
qemu_opts_del(opts);
@@ -281,10 +278,27 @@ static bool blkverify_recurse_is_first_non_filter(BlockDriverState *bs,
return bdrv_recurse_is_first_non_filter(s->test_file->bs, candidate);
}
static void blkverify_refresh_filename(BlockDriverState *bs)
static void blkverify_refresh_filename(BlockDriverState *bs, QDict *options)
{
BDRVBlkverifyState *s = bs->opaque;
/* bs->file->bs has already been refreshed */
bdrv_refresh_filename(s->test_file->bs);
if (bs->file->bs->full_open_options
&& s->test_file->bs->full_open_options)
{
QDict *opts = qdict_new();
qdict_put_str(opts, "driver", "blkverify");
QINCREF(bs->file->bs->full_open_options);
qdict_put(opts, "raw", bs->file->bs->full_open_options);
QINCREF(s->test_file->bs->full_open_options);
qdict_put(opts, "test", s->test_file->bs->full_open_options);
bs->full_open_options = opts;
}
if (bs->file->bs->exact_filename[0]
&& s->test_file->bs->exact_filename[0])
{
@@ -299,15 +313,6 @@ static void blkverify_refresh_filename(BlockDriverState *bs)
}
}
static char *blkverify_dirname(BlockDriverState *bs, Error **errp)
{
/* In general, there are two BDSs with different dirnames below this one;
* so there is no unique dirname we could return (unless both are equal by
* chance). Therefore, to be consistent, just always return NULL. */
error_setg(errp, "Cannot generate a base directory for blkverify nodes");
return NULL;
}
static BlockDriver bdrv_blkverify = {
.format_name = "blkverify",
.protocol_name = "blkverify",
@@ -319,7 +324,6 @@ static BlockDriver bdrv_blkverify = {
.bdrv_child_perm = bdrv_filter_default_perms,
.bdrv_getlength = blkverify_getlength,
.bdrv_refresh_filename = blkverify_refresh_filename,
.bdrv_dirname = blkverify_dirname,
.bdrv_co_preadv = blkverify_co_preadv,
.bdrv_co_pwritev = blkverify_co_pwritev,

View File

@@ -47,7 +47,9 @@ struct BlockBackend {
QTAILQ_ENTRY(BlockBackend) monitor_link; /* for monitor_block_backends */
BlockBackendPublic public;
DeviceState *dev; /* attached device model, if any */
void *dev; /* attached device model, if any */
bool legacy_dev; /* true if dev is not a DeviceState */
/* TODO change to DeviceState when all users are qdevified */
const BlockDevOps *dev_ops;
void *dev_opaque;
@@ -86,6 +88,7 @@ struct BlockBackend {
* Accessed with atomic ops.
*/
unsigned int in_flight;
AioWait wait;
};
typedef struct BlockBackendAIOCB {
@@ -118,7 +121,6 @@ static void blk_root_inherit_options(int *child_flags, QDict *child_options,
abort();
}
static void blk_root_drained_begin(BdrvChild *child);
static bool blk_root_drained_poll(BdrvChild *child);
static void blk_root_drained_end(BdrvChild *child);
static void blk_root_change_media(BdrvChild *child, bool load);
@@ -292,7 +294,6 @@ static const BdrvChildRole child_root = {
.get_parent_desc = blk_root_get_parent_desc,
.drained_begin = blk_root_drained_begin,
.drained_poll = blk_root_drained_poll,
.drained_end = blk_root_drained_end,
.activate = blk_root_activate,
@@ -323,9 +324,6 @@ BlockBackend *blk_new(uint64_t perm, uint64_t shared_perm)
blk->shared_perm = shared_perm;
blk_set_enable_write_cache(blk, true);
blk->on_read_error = BLOCKDEV_ON_ERROR_REPORT;
blk->on_write_error = BLOCKDEV_ON_ERROR_ENOSPC;
block_acct_init(&blk->stats);
notifier_list_init(&blk->remove_bs_notifiers);
@@ -421,6 +419,7 @@ static void drive_info_del(DriveInfo *dinfo)
return;
}
qemu_opts_del(dinfo->opts);
g_free(dinfo->serial);
g_free(dinfo);
}
@@ -435,7 +434,6 @@ int blk_get_refcnt(BlockBackend *blk)
*/
void blk_ref(BlockBackend *blk)
{
assert(blk->refcnt > 0);
blk->refcnt++;
}
@@ -448,13 +446,7 @@ void blk_unref(BlockBackend *blk)
{
if (blk) {
assert(blk->refcnt > 0);
if (blk->refcnt > 1) {
blk->refcnt--;
} else {
blk_drain(blk);
/* blk_drain() cannot resurrect blk, nobody held a reference */
assert(blk->refcnt == 1);
blk->refcnt = 0;
if (!--blk->refcnt) {
blk_delete(blk);
}
}
@@ -776,11 +768,6 @@ void blk_remove_bs(BlockBackend *blk)
blk_update_root_state(blk);
/* bdrv_root_unref_child() will cause blk->root to become stale and may
* switch to a completion coroutine later on. Let's drain all I/O here
* to avoid that and a potential QEMU crash.
*/
blk_drain(blk);
bdrv_root_unref_child(blk->root);
blk->root = NULL;
}
@@ -834,11 +821,7 @@ void blk_get_perm(BlockBackend *blk, uint64_t *perm, uint64_t *shared_perm)
*shared_perm = blk->shared_perm;
}
/*
* Attach device model @dev to @blk.
* Return 0 on success, -EBUSY when a device model is attached already.
*/
int blk_attach_dev(BlockBackend *blk, DeviceState *dev)
static int blk_do_attach_dev(BlockBackend *blk, void *dev)
{
if (blk->dev) {
return -EBUSY;
@@ -853,16 +836,40 @@ int blk_attach_dev(BlockBackend *blk, DeviceState *dev)
blk_ref(blk);
blk->dev = dev;
blk->legacy_dev = false;
blk_iostatus_reset(blk);
return 0;
}
/*
* Attach device model @dev to @blk.
* Return 0 on success, -EBUSY when a device model is attached already.
*/
int blk_attach_dev(BlockBackend *blk, DeviceState *dev)
{
return blk_do_attach_dev(blk, dev);
}
/*
* Attach device model @dev to @blk.
* @blk must not have a device model attached already.
* TODO qdevified devices don't use this, remove when devices are qdevified
*/
void blk_attach_dev_legacy(BlockBackend *blk, void *dev)
{
if (blk_do_attach_dev(blk, dev) < 0) {
abort();
}
blk->legacy_dev = true;
}
/*
* Detach device model @dev from @blk.
* @dev must be currently attached to @blk.
*/
void blk_detach_dev(BlockBackend *blk, DeviceState *dev)
void blk_detach_dev(BlockBackend *blk, void *dev)
/* TODO change to DeviceState *dev when all users are qdevified */
{
assert(blk->dev == dev);
blk->dev = NULL;
@@ -876,7 +883,8 @@ void blk_detach_dev(BlockBackend *blk, DeviceState *dev)
/*
* Return the device model attached to @blk if any, else null.
*/
DeviceState *blk_get_attached_dev(BlockBackend *blk)
void *blk_get_attached_dev(BlockBackend *blk)
/* TODO change to return DeviceState * when all users are qdevified */
{
return blk->dev;
}
@@ -885,15 +893,17 @@ DeviceState *blk_get_attached_dev(BlockBackend *blk)
* device attached to the BlockBackend. */
char *blk_get_attached_dev_id(BlockBackend *blk)
{
DeviceState *dev = blk->dev;
DeviceState *dev;
assert(!blk->legacy_dev);
dev = blk->dev;
if (!dev) {
return g_strdup("");
} else if (dev->id) {
return g_strdup(dev->id);
}
return object_get_canonical_path(OBJECT(dev)) ?: g_strdup("");
return object_get_canonical_path(OBJECT(dev));
}
/*
@@ -923,6 +933,11 @@ BlockBackend *blk_by_dev(void *dev)
void blk_set_dev_ops(BlockBackend *blk, const BlockDevOps *ops,
void *opaque)
{
/* All drivers that use blk_set_dev_ops() are qdevified and we want to keep
* it that way, so we can assume blk->dev, if present, is a DeviceState if
* blk->dev_ops is set. Non-device users may use dev_ops without device. */
assert(!blk->legacy_dev);
blk->dev_ops = ops;
blk->dev_opaque = opaque;
@@ -948,6 +963,8 @@ void blk_dev_change_media_cb(BlockBackend *blk, bool load, Error **errp)
bool tray_was_open, tray_is_open;
Error *local_err = NULL;
assert(!blk->legacy_dev);
tray_was_open = blk_dev_is_tray_open(blk);
blk->dev_ops->change_media_cb(blk->dev_opaque, load, &local_err);
if (local_err) {
@@ -959,7 +976,8 @@ void blk_dev_change_media_cb(BlockBackend *blk, bool load, Error **errp)
if (tray_was_open != tray_is_open) {
char *id = blk_get_attached_dev_id(blk);
qapi_event_send_device_tray_moved(blk_name(blk), id, tray_is_open);
qapi_event_send_device_tray_moved(blk_name(blk), id, tray_is_open,
&error_abort);
g_free(id);
}
}
@@ -1187,7 +1205,6 @@ static void blk_read_entry(void *opaque)
rwco->ret = blk_co_preadv(rwco->blk, rwco->offset, qiov->size,
qiov, rwco->flags);
aio_wait_kick();
}
static void blk_write_entry(void *opaque)
@@ -1197,15 +1214,23 @@ static void blk_write_entry(void *opaque)
rwco->ret = blk_co_pwritev(rwco->blk, rwco->offset, qiov->size,
qiov, rwco->flags);
aio_wait_kick();
}
static int blk_prw(BlockBackend *blk, int64_t offset, uint8_t *buf,
int64_t bytes, CoroutineEntry co_entry,
BdrvRequestFlags flags)
{
QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, buf, bytes);
BlkRwCo rwco = {
QEMUIOVector qiov;
struct iovec iov;
BlkRwCo rwco;
iov = (struct iovec) {
.iov_base = buf,
.iov_len = bytes,
};
qemu_iovec_init_external(&qiov, &iov, 1);
rwco = (BlkRwCo) {
.blk = blk,
.offset = offset,
.iobuf = &qiov,
@@ -1253,15 +1278,15 @@ int blk_make_zero(BlockBackend *blk, BdrvRequestFlags flags)
return bdrv_make_zero(blk->root, flags);
}
void blk_inc_in_flight(BlockBackend *blk)
static void blk_inc_in_flight(BlockBackend *blk)
{
atomic_inc(&blk->in_flight);
}
void blk_dec_in_flight(BlockBackend *blk)
static void blk_dec_in_flight(BlockBackend *blk)
{
atomic_dec(&blk->in_flight);
aio_wait_kick();
aio_wait_kick(&blk->wait);
}
static void error_callback_bh(void *opaque)
@@ -1302,8 +1327,8 @@ static const AIOCBInfo blk_aio_em_aiocb_info = {
static void blk_aio_complete(BlkAioEmAIOCB *acb)
{
if (acb->has_returned) {
acb->common.cb(acb->common.opaque, acb->rwco.ret);
blk_dec_in_flight(acb->rwco.blk);
acb->common.cb(acb->common.opaque, acb->rwco.ret);
qemu_aio_unref(acb);
}
}
@@ -1500,7 +1525,6 @@ static void blk_ioctl_entry(void *opaque)
rwco->ret = blk_co_ioctl(rwco->blk, rwco->offset,
qiov->iov[0].iov_base);
aio_wait_kick();
}
int blk_ioctl(BlockBackend *blk, unsigned long int req, void *buf)
@@ -1531,7 +1555,7 @@ int blk_co_pdiscard(BlockBackend *blk, int64_t offset, int bytes)
return ret;
}
return bdrv_co_pdiscard(blk->root, offset, bytes);
return bdrv_co_pdiscard(blk_bs(blk), offset, bytes);
}
int blk_co_flush(BlockBackend *blk)
@@ -1547,7 +1571,6 @@ static void blk_flush_entry(void *opaque)
{
BlkRwCo *rwco = opaque;
rwco->ret = blk_co_flush(rwco->blk);
aio_wait_kick();
}
int blk_flush(BlockBackend *blk)
@@ -1564,8 +1587,9 @@ void blk_drain(BlockBackend *blk)
}
/* We may have -ENOMEDIUM completions in flight */
AIO_WAIT_WHILE(blk_get_aio_context(blk),
atomic_mb_read(&blk->in_flight) > 0);
AIO_WAIT_WHILE(&blk->wait,
blk_get_aio_context(blk),
atomic_mb_read(&blk->in_flight) > 0);
if (bs) {
bdrv_drained_end(bs);
@@ -1584,7 +1608,8 @@ void blk_drain_all(void)
aio_context_acquire(ctx);
/* We may have -ENOMEDIUM completions in flight */
AIO_WAIT_WHILE(ctx, atomic_mb_read(&blk->in_flight) > 0);
AIO_WAIT_WHILE(&blk->wait, ctx,
atomic_mb_read(&blk->in_flight) > 0);
aio_context_release(ctx);
}
@@ -1636,7 +1661,8 @@ static void send_qmp_error_event(BlockBackend *blk,
qapi_event_send_block_io_error(blk_name(blk), !!bs,
bs ? bdrv_get_node_name(bs) : NULL, optype,
action, blk_iostatus_is_enabled(blk),
error == ENOSPC, strerror(error));
error == ENOSPC, strerror(error),
&error_abort);
}
/* This is done by device models because, while the block layer knows
@@ -1671,7 +1697,7 @@ void blk_error_action(BlockBackend *blk, BlockErrorAction action,
}
}
bool blk_is_read_only(BlockBackend *blk)
int blk_is_read_only(BlockBackend *blk)
{
BlockDriverState *bs = blk_bs(blk);
@@ -1682,18 +1708,18 @@ bool blk_is_read_only(BlockBackend *blk)
}
}
bool blk_is_sg(BlockBackend *blk)
int blk_is_sg(BlockBackend *blk)
{
BlockDriverState *bs = blk_bs(blk);
if (!bs) {
return false;
return 0;
}
return bdrv_is_sg(bs);
}
bool blk_enable_write_cache(BlockBackend *blk)
int blk_enable_write_cache(BlockBackend *blk)
{
return blk->enable_write_cache;
}
@@ -1741,6 +1767,9 @@ void blk_eject(BlockBackend *blk, bool eject_flag)
BlockDriverState *bs = blk_bs(blk);
char *id;
/* blk_eject is only called by qdevified devices */
assert(!blk->legacy_dev);
if (bs) {
bdrv_eject(bs, eject_flag);
}
@@ -1749,7 +1778,7 @@ void blk_eject(BlockBackend *blk, bool eject_flag)
* the frontend experienced a tray event. */
id = blk_get_attached_dev_id(blk);
qapi_event_send_device_tray_moved(blk_name(blk), id,
eject_flag);
eject_flag, &error_abort);
g_free(id);
}
@@ -1764,13 +1793,6 @@ int blk_get_flags(BlockBackend *blk)
}
}
/* Returns the minimum request alignment, in bytes; guaranteed nonzero */
uint32_t blk_get_request_alignment(BlockBackend *blk)
{
BlockDriverState *bs = blk_bs(blk);
return bs ? bs->bl.request_alignment : BDRV_SECTOR_SIZE;
}
/* Returns the maximum transfer length, in bytes; guaranteed nonzero */
uint32_t blk_get_max_transfer(BlockBackend *blk)
{
@@ -1843,7 +1865,13 @@ void blk_op_unblock_all(BlockBackend *blk, Error *reason)
AioContext *blk_get_aio_context(BlockBackend *blk)
{
return bdrv_get_aio_context(blk_bs(blk));
BlockDriverState *bs = blk_bs(blk);
if (bs) {
return bdrv_get_aio_context(bs);
} else {
return qemu_get_aio_context();
}
}
static AioContext *blk_aiocb_get_aio_context(BlockAIOCB *acb)
@@ -1984,7 +2012,6 @@ static void blk_pdiscard_entry(void *opaque)
QEMUIOVector *qiov = rwco->iobuf;
rwco->ret = blk_co_pdiscard(rwco->blk, rwco->offset, qiov->size);
aio_wait_kick();
}
int blk_pdiscard(BlockBackend *blk, int64_t offset, int bytes)
@@ -2166,13 +2193,6 @@ static void blk_root_drained_begin(BdrvChild *child)
}
}
static bool blk_root_drained_poll(BdrvChild *child)
{
BlockBackend *blk = child->opaque;
assert(blk->quiesce_counter);
return !!blk->in_flight;
}
static void blk_root_drained_end(BdrvChild *child)
{
BlockBackend *blk = child->opaque;
@@ -2197,27 +2217,3 @@ void blk_unregister_buf(BlockBackend *blk, void *host)
{
bdrv_unregister_buf(blk_bs(blk), host);
}
int coroutine_fn blk_co_copy_range(BlockBackend *blk_in, int64_t off_in,
BlockBackend *blk_out, int64_t off_out,
int bytes, BdrvRequestFlags read_flags,
BdrvRequestFlags write_flags)
{
int r;
r = blk_check_byte_request(blk_in, off_in, bytes);
if (r) {
return r;
}
r = blk_check_byte_request(blk_out, off_out, bytes);
if (r) {
return r;
}
return bdrv_co_copy_range(blk_in->root, off_in,
blk_out->root, off_out,
bytes, read_flags, write_flags);
}
const BdrvChild *blk_root(BlockBackend *blk)
{
return blk->root;
}

View File

@@ -85,14 +85,14 @@ static int bochs_probe(const uint8_t *buf, int buf_size, const char *filename)
const struct bochs_header *bochs = (const void *)buf;
if (buf_size < HEADER_SIZE)
return 0;
return 0;
if (!strcmp(bochs->magic, HEADER_MAGIC) &&
!strcmp(bochs->type, REDOLOG_TYPE) &&
!strcmp(bochs->subtype, GROWING_TYPE) &&
((le32_to_cpu(bochs->version) == HEADER_VERSION) ||
(le32_to_cpu(bochs->version) == HEADER_V1)))
return 100;
!strcmp(bochs->type, REDOLOG_TYPE) &&
!strcmp(bochs->subtype, GROWING_TYPE) &&
((le32_to_cpu(bochs->version) == HEADER_VERSION) ||
(le32_to_cpu(bochs->version) == HEADER_V1)))
return 100;
return 0;
}
@@ -105,18 +105,23 @@ static int bochs_open(BlockDriverState *bs, QDict *options, int flags,
struct bochs_header bochs;
int ret;
/* No write support yet */
ret = bdrv_apply_auto_read_only(bs, NULL, errp);
if (ret < 0) {
return ret;
}
bs->file = bdrv_open_child(NULL, options, "file", bs, &child_file,
false, errp);
if (!bs->file) {
return -EINVAL;
}
if (!bdrv_is_read_only(bs)) {
error_report("Opening bochs images without an explicit read-only=on "
"option is deprecated. Future versions will refuse to "
"open the image instead of automatically marking the "
"image read-only.");
ret = bdrv_set_read_only(bs, true, errp); /* no write support yet */
if (ret < 0) {
return ret;
}
}
ret = bdrv_pread(bs->file, 0, &bochs, sizeof(bochs));
if (ret < 0) {
return ret;
@@ -125,8 +130,8 @@ static int bochs_open(BlockDriverState *bs, QDict *options, int flags,
if (strcmp(bochs.magic, HEADER_MAGIC) ||
strcmp(bochs.type, REDOLOG_TYPE) ||
strcmp(bochs.subtype, GROWING_TYPE) ||
((le32_to_cpu(bochs.version) != HEADER_VERSION) &&
(le32_to_cpu(bochs.version) != HEADER_V1))) {
((le32_to_cpu(bochs.version) != HEADER_VERSION) &&
(le32_to_cpu(bochs.version) != HEADER_V1))) {
error_setg(errp, "Image not in Bochs format");
return -EINVAL;
}
@@ -158,7 +163,7 @@ static int bochs_open(BlockDriverState *bs, QDict *options, int flags,
}
for (i = 0; i < s->catalog_size; i++)
le32_to_cpus(&s->catalog_bitmap[i]);
le32_to_cpus(&s->catalog_bitmap[i]);
s->data_offset = le32_to_cpu(bochs.header) + (s->catalog_size * 4);
@@ -217,7 +222,7 @@ static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
extent_offset = (offset % s->extent_size) / 512;
if (s->catalog_bitmap[extent_index] == 0xffffffff) {
return 0; /* not allocated */
return 0; /* not allocated */
}
bitmap_offset = s->data_offset +
@@ -232,7 +237,7 @@ static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
}
if (!((bitmap_entry >> (extent_offset % 8)) & 1)) {
return 0; /* not allocated */
return 0; /* not allocated */
}
return bitmap_offset + (512 * (s->bitmap_blocks + extent_offset));

View File

@@ -67,17 +67,23 @@ static int cloop_open(BlockDriverState *bs, QDict *options, int flags,
uint32_t offsets_size, max_compressed_block_size = 1, i;
int ret;
ret = bdrv_apply_auto_read_only(bs, NULL, errp);
if (ret < 0) {
return ret;
}
bs->file = bdrv_open_child(NULL, options, "file", bs, &child_file,
false, errp);
if (!bs->file) {
return -EINVAL;
}
if (!bdrv_is_read_only(bs)) {
error_report("Opening cloop images without an explicit read-only=on "
"option is deprecated. Future versions will refuse to "
"open the image instead of automatically marking the "
"image read-only.");
ret = bdrv_set_read_only(bs, true, errp);
if (ret < 0) {
return ret;
}
}
/* read header */
ret = bdrv_pread(bs->file, 128, &s->block_size, 4);
if (ret < 0) {

View File

@@ -31,15 +31,16 @@ enum {
COMMIT_BUFFER_SIZE = 512 * 1024, /* in bytes */
};
#define SLICE_TIME 100000000ULL /* ns */
typedef struct CommitBlockJob {
BlockJob common;
RateLimit limit;
BlockDriverState *commit_top_bs;
BlockBackend *top;
BlockBackend *base;
BlockDriverState *base_bs;
BlockdevOnError on_error;
bool base_read_only;
bool chain_frozen;
int base_flags;
char *backing_file_str;
} CommitBlockJob;
@@ -48,9 +49,14 @@ static int coroutine_fn commit_populate(BlockBackend *bs, BlockBackend *base,
void *buf)
{
int ret = 0;
QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, buf, bytes);
QEMUIOVector qiov;
struct iovec iov = {
.iov_base = buf,
.iov_len = bytes,
};
assert(bytes < SIZE_MAX);
qemu_iovec_init_external(&qiov, &iov, 1);
ret = blk_co_preadv(bs, offset, qiov.size, &qiov, 0);
if (ret < 0) {
@@ -65,100 +71,96 @@ static int coroutine_fn commit_populate(BlockBackend *bs, BlockBackend *base,
return 0;
}
static int commit_prepare(Job *job)
{
CommitBlockJob *s = container_of(job, CommitBlockJob, common.job);
typedef struct {
int ret;
} CommitCompleteData;
bdrv_unfreeze_backing_chain(s->commit_top_bs, s->base_bs);
s->chain_frozen = false;
static void commit_complete(BlockJob *job, void *opaque)
{
CommitBlockJob *s = container_of(job, CommitBlockJob, common);
CommitCompleteData *data = opaque;
BlockDriverState *top = blk_bs(s->top);
BlockDriverState *base = blk_bs(s->base);
BlockDriverState *commit_top_bs = s->commit_top_bs;
int ret = data->ret;
bool remove_commit_top_bs = false;
/* Make sure commit_top_bs and top stay around until bdrv_replace_node() */
bdrv_ref(top);
bdrv_ref(commit_top_bs);
/* Remove base node parent that still uses BLK_PERM_WRITE/RESIZE before
* the normal backing chain can be restored. */
blk_unref(s->base);
s->base = NULL;
/* FIXME: bdrv_drop_intermediate treats total failures and partial failures
* identically. Further work is needed to disambiguate these cases. */
return bdrv_drop_intermediate(s->commit_top_bs, s->base_bs,
s->backing_file_str);
}
static void commit_abort(Job *job)
{
CommitBlockJob *s = container_of(job, CommitBlockJob, common.job);
BlockDriverState *top_bs = blk_bs(s->top);
if (s->chain_frozen) {
bdrv_unfreeze_backing_chain(s->commit_top_bs, s->base_bs);
if (!block_job_is_cancelled(&s->common) && ret == 0) {
/* success */
ret = bdrv_drop_intermediate(s->commit_top_bs, base,
s->backing_file_str);
} else {
/* XXX Can (or should) we somehow keep 'consistent read' blocked even
* after the failed/cancelled commit job is gone? If we already wrote
* something to base, the intermediate images aren't valid any more. */
remove_commit_top_bs = true;
}
/* Make sure commit_top_bs and top stay around until bdrv_replace_node() */
bdrv_ref(top_bs);
bdrv_ref(s->commit_top_bs);
if (s->base) {
blk_unref(s->base);
}
/* free the blockers on the intermediate nodes so that bdrv_replace_nodes
* can succeed */
block_job_remove_all_bdrv(&s->common);
/* If bdrv_drop_intermediate() failed (or was not invoked), remove the
* commit filter driver from the backing chain now. Do this as the final
* step so that the 'consistent read' permission can be granted.
*
* XXX Can (or should) we somehow keep 'consistent read' blocked even
* after the failed/cancelled commit job is gone? If we already wrote
* something to base, the intermediate images aren't valid any more. */
bdrv_child_try_set_perm(s->commit_top_bs->backing, 0, BLK_PERM_ALL,
&error_abort);
bdrv_replace_node(s->commit_top_bs, backing_bs(s->commit_top_bs),
&error_abort);
bdrv_unref(s->commit_top_bs);
bdrv_unref(top_bs);
}
static void commit_clean(Job *job)
{
CommitBlockJob *s = container_of(job, CommitBlockJob, common.job);
/* restore base open flags here if appropriate (e.g., change the base back
* to r/o). These reopens do not need to be atomic, since we won't abort
* even on failure here */
if (s->base_read_only) {
bdrv_reopen_set_read_only(s->base_bs, true, NULL);
if (s->base_flags != bdrv_get_flags(base)) {
bdrv_reopen(base, s->base_flags, NULL);
}
g_free(s->backing_file_str);
blk_unref(s->top);
/* If there is more than one reference to the job (e.g. if called from
* block_job_finish_sync()), block_job_completed() won't free it and
* therefore the blockers on the intermediate nodes remain. This would
* cause bdrv_set_backing_hd() to fail. */
block_job_remove_all_bdrv(job);
block_job_completed(&s->common, ret);
g_free(data);
/* If bdrv_drop_intermediate() didn't already do that, remove the commit
* filter driver from the backing chain. Do this as the final step so that
* the 'consistent read' permission can be granted. */
if (remove_commit_top_bs) {
bdrv_child_try_set_perm(commit_top_bs->backing, 0, BLK_PERM_ALL,
&error_abort);
bdrv_replace_node(commit_top_bs, backing_bs(commit_top_bs),
&error_abort);
}
bdrv_unref(commit_top_bs);
bdrv_unref(top);
}
static int coroutine_fn commit_run(Job *job, Error **errp)
static void coroutine_fn commit_run(void *opaque)
{
CommitBlockJob *s = container_of(job, CommitBlockJob, common.job);
CommitBlockJob *s = opaque;
CommitCompleteData *data;
int64_t offset;
uint64_t delay_ns = 0;
int ret = 0;
int64_t n = 0; /* bytes */
void *buf = NULL;
int bytes_written = 0;
int64_t len, base_len;
int64_t base_len;
ret = len = blk_getlength(s->top);
if (len < 0) {
ret = s->common.len = blk_getlength(s->top);
if (s->common.len < 0) {
goto out;
}
job_progress_set_remaining(&s->common.job, len);
ret = base_len = blk_getlength(s->base);
if (base_len < 0) {
goto out;
}
if (base_len < len) {
ret = blk_truncate(s->base, len, PREALLOC_MODE_OFF, NULL);
if (base_len < s->common.len) {
ret = blk_truncate(s->base, s->common.len, PREALLOC_MODE_OFF, NULL);
if (ret) {
goto out;
}
@@ -166,14 +168,14 @@ static int coroutine_fn commit_run(Job *job, Error **errp)
buf = blk_blockalign(s->top, COMMIT_BUFFER_SIZE);
for (offset = 0; offset < len; offset += n) {
for (offset = 0; offset < s->common.len; offset += n) {
bool copy;
/* Note that even when no rate limit is applied we need to yield
* with no pending I/O here so that bdrv_drain_all() returns.
*/
job_sleep_ns(&s->common.job, delay_ns);
if (job_is_cancelled(&s->common.job)) {
block_job_sleep_ns(&s->common, delay_ns);
if (block_job_is_cancelled(&s->common)) {
break;
}
/* Copy if allocated above the base */
@@ -196,10 +198,10 @@ static int coroutine_fn commit_run(Job *job, Error **errp)
}
}
/* Publish progress */
job_progress_update(&s->common.job, n);
s->common.offset += n;
if (copy) {
delay_ns = block_job_ratelimit_get_delay(&s->common, n);
if (copy && s->common.speed) {
delay_ns = ratelimit_calculate_delay(&s->limit, n);
} else {
delay_ns = 0;
}
@@ -210,21 +212,27 @@ static int coroutine_fn commit_run(Job *job, Error **errp)
out:
qemu_vfree(buf);
return ret;
data = g_malloc(sizeof(*data));
data->ret = ret;
block_job_defer_to_main_loop(&s->common, commit_complete, data);
}
static void commit_set_speed(BlockJob *job, int64_t speed, Error **errp)
{
CommitBlockJob *s = container_of(job, CommitBlockJob, common);
if (speed < 0) {
error_setg(errp, QERR_INVALID_PARAMETER, "speed");
return;
}
ratelimit_set_speed(&s->limit, speed, SLICE_TIME);
}
static const BlockJobDriver commit_job_driver = {
.job_driver = {
.instance_size = sizeof(CommitBlockJob),
.job_type = JOB_TYPE_COMMIT,
.free = block_job_free,
.user_resume = block_job_user_resume,
.drain = block_job_drain,
.run = commit_run,
.prepare = commit_prepare,
.abort = commit_abort,
.clean = commit_clean
},
.instance_size = sizeof(CommitBlockJob),
.job_type = BLOCK_JOB_TYPE_COMMIT,
.set_speed = commit_set_speed,
.start = commit_run,
};
static int coroutine_fn bdrv_commit_top_preadv(BlockDriverState *bs,
@@ -233,12 +241,17 @@ static int coroutine_fn bdrv_commit_top_preadv(BlockDriverState *bs,
return bdrv_co_preadv(bs->backing, offset, bytes, qiov, flags);
}
static void bdrv_commit_top_refresh_filename(BlockDriverState *bs)
static void bdrv_commit_top_refresh_filename(BlockDriverState *bs, QDict *opts)
{
bdrv_refresh_filename(bs->backing->bs);
pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
bs->backing->bs->filename);
}
static void bdrv_commit_top_close(BlockDriverState *bs)
{
}
static void bdrv_commit_top_child_perm(BlockDriverState *bs, BdrvChild *c,
const BdrvChildRole *role,
BlockReopenQueue *reopen_queue,
@@ -256,16 +269,17 @@ static BlockDriver bdrv_commit_top = {
.bdrv_co_preadv = bdrv_commit_top_preadv,
.bdrv_co_block_status = bdrv_co_block_status_from_backing,
.bdrv_refresh_filename = bdrv_commit_top_refresh_filename,
.bdrv_close = bdrv_commit_top_close,
.bdrv_child_perm = bdrv_commit_top_child_perm,
};
void commit_start(const char *job_id, BlockDriverState *bs,
BlockDriverState *base, BlockDriverState *top,
int creation_flags, int64_t speed,
BlockDriverState *base, BlockDriverState *top, int64_t speed,
BlockdevOnError on_error, const char *backing_file_str,
const char *filter_node_name, Error **errp)
{
CommitBlockJob *s;
int orig_base_flags;
BlockDriverState *iter;
BlockDriverState *commit_top_bs = NULL;
Error *local_err = NULL;
@@ -278,15 +292,17 @@ void commit_start(const char *job_id, BlockDriverState *bs,
}
s = block_job_create(job_id, &commit_job_driver, NULL, bs, 0, BLK_PERM_ALL,
speed, creation_flags, NULL, NULL, errp);
speed, BLOCK_JOB_DEFAULT, NULL, NULL, errp);
if (!s) {
return;
}
/* convert base to r/w, if necessary */
s->base_read_only = bdrv_is_read_only(base);
if (s->base_read_only) {
if (bdrv_reopen_set_read_only(base, false, errp) != 0) {
orig_base_flags = bdrv_get_flags(base);
if (!(orig_base_flags & BDRV_O_RDWR)) {
bdrv_reopen(base, orig_base_flags | BDRV_O_RDWR, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
goto fail;
}
}
@@ -338,11 +354,6 @@ void commit_start(const char *job_id, BlockDriverState *bs,
}
}
if (bdrv_freeze_backing_chain(commit_top_bs, base, errp) < 0) {
goto fail;
}
s->chain_frozen = true;
ret = block_job_add_bdrv(&s->common, "base", base, 0, BLK_PERM_ALL, errp);
if (ret < 0) {
goto fail;
@@ -358,7 +369,6 @@ void commit_start(const char *job_id, BlockDriverState *bs,
if (ret < 0) {
goto fail;
}
s->base_bs = base;
/* Required permissions are already taken with block_job_add_bdrv() */
s->top = blk_new(0, BLK_PERM_ALL);
@@ -367,29 +377,25 @@ void commit_start(const char *job_id, BlockDriverState *bs,
goto fail;
}
s->base_flags = orig_base_flags;
s->backing_file_str = g_strdup(backing_file_str);
s->on_error = on_error;
trace_commit_start(bs, base, top, s);
job_start(&s->common.job);
block_job_start(&s->common);
return;
fail:
if (s->chain_frozen) {
bdrv_unfreeze_backing_chain(commit_top_bs, base);
}
if (s->base) {
blk_unref(s->base);
}
if (s->top) {
blk_unref(s->top);
}
job_early_fail(&s->common.job);
/* commit_top_bs has to be replaced after deleting the block job,
* otherwise this would fail because of lack of permissions. */
if (commit_top_bs) {
bdrv_replace_node(commit_top_bs, top, &error_abort);
}
block_job_early_fail(&s->common);
}
@@ -403,7 +409,7 @@ int bdrv_commit(BlockDriverState *bs)
BlockDriverState *commit_top_bs = NULL;
BlockDriver *drv = bs->drv;
int64_t offset, length, backing_length;
int ro;
int ro, open_flags;
int64_t n;
int ret = 0;
uint8_t *buf = NULL;
@@ -422,9 +428,10 @@ int bdrv_commit(BlockDriverState *bs)
}
ro = bs->backing->bs->read_only;
open_flags = bs->backing->bs->open_flags;
if (ro) {
if (bdrv_reopen_set_read_only(bs->backing->bs, false, NULL)) {
if (bdrv_reopen(bs->backing->bs, open_flags | BDRV_O_RDWR, NULL)) {
return -EACCES;
}
}
@@ -534,7 +541,7 @@ ro_cleanup:
if (ro) {
/* ignoring error return here */
bdrv_reopen_set_read_only(bs->backing->bs, true, NULL);
bdrv_reopen(bs->backing->bs, open_flags & ~BDRV_O_RDWR, NULL);
}
return ret;

View File

@@ -1,166 +0,0 @@
/*
* Copy-on-read filter block driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* Author:
* Max Reitz <mreitz@redhat.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 or
* (at your option) version 3 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "block/block_int.h"
static int cor_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
bs->file = bdrv_open_child(NULL, options, "file", bs, &child_file, false,
errp);
if (!bs->file) {
return -EINVAL;
}
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
(BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
bs->file->bs->supported_zero_flags);
return 0;
}
#define PERM_PASSTHROUGH (BLK_PERM_CONSISTENT_READ \
| BLK_PERM_WRITE \
| BLK_PERM_RESIZE)
#define PERM_UNCHANGED (BLK_PERM_ALL & ~PERM_PASSTHROUGH)
static void cor_child_perm(BlockDriverState *bs, BdrvChild *c,
const BdrvChildRole *role,
BlockReopenQueue *reopen_queue,
uint64_t perm, uint64_t shared,
uint64_t *nperm, uint64_t *nshared)
{
if (c == NULL) {
*nperm = (perm & PERM_PASSTHROUGH) | BLK_PERM_WRITE_UNCHANGED;
*nshared = (shared & PERM_PASSTHROUGH) | PERM_UNCHANGED;
return;
}
*nperm = (perm & PERM_PASSTHROUGH) |
(c->perm & PERM_UNCHANGED);
*nshared = (shared & PERM_PASSTHROUGH) |
(c->shared_perm & PERM_UNCHANGED);
}
static int64_t cor_getlength(BlockDriverState *bs)
{
return bdrv_getlength(bs->file->bs);
}
static int coroutine_fn cor_co_truncate(BlockDriverState *bs, int64_t offset,
PreallocMode prealloc, Error **errp)
{
return bdrv_co_truncate(bs->file, offset, prealloc, errp);
}
static int coroutine_fn cor_co_preadv(BlockDriverState *bs,
uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags)
{
return bdrv_co_preadv(bs->file, offset, bytes, qiov,
flags | BDRV_REQ_COPY_ON_READ);
}
static int coroutine_fn cor_co_pwritev(BlockDriverState *bs,
uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags)
{
return bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
}
static int coroutine_fn cor_co_pwrite_zeroes(BlockDriverState *bs,
int64_t offset, int bytes,
BdrvRequestFlags flags)
{
return bdrv_co_pwrite_zeroes(bs->file, offset, bytes, flags);
}
static int coroutine_fn cor_co_pdiscard(BlockDriverState *bs,
int64_t offset, int bytes)
{
return bdrv_co_pdiscard(bs->file, offset, bytes);
}
static void cor_eject(BlockDriverState *bs, bool eject_flag)
{
bdrv_eject(bs->file->bs, eject_flag);
}
static void cor_lock_medium(BlockDriverState *bs, bool locked)
{
bdrv_lock_medium(bs->file->bs, locked);
}
static bool cor_recurse_is_first_non_filter(BlockDriverState *bs,
BlockDriverState *candidate)
{
return bdrv_recurse_is_first_non_filter(bs->file->bs, candidate);
}
static BlockDriver bdrv_copy_on_read = {
.format_name = "copy-on-read",
.bdrv_open = cor_open,
.bdrv_child_perm = cor_child_perm,
.bdrv_getlength = cor_getlength,
.bdrv_co_truncate = cor_co_truncate,
.bdrv_co_preadv = cor_co_preadv,
.bdrv_co_pwritev = cor_co_pwritev,
.bdrv_co_pwrite_zeroes = cor_co_pwrite_zeroes,
.bdrv_co_pdiscard = cor_co_pdiscard,
.bdrv_eject = cor_eject,
.bdrv_lock_medium = cor_lock_medium,
.bdrv_co_block_status = bdrv_co_block_status_from_file,
.bdrv_recurse_is_first_non_filter = cor_recurse_is_first_non_filter,
.has_variable_length = true,
.is_filter = true,
};
static void bdrv_copy_on_read_init(void)
{
bdrv_register(&bdrv_copy_on_read);
}
block_init(bdrv_copy_on_read_init);

View File

@@ -24,44 +24,28 @@
#include "qemu/osdep.h"
#include "block/block_int.h"
#include "qemu/job.h"
#include "qapi/qapi-commands-block-core.h"
#include "qapi/qapi-visit-block-core.h"
#include "qapi/clone-visitor.h"
#include "qapi/error.h"
typedef struct BlockdevCreateJob {
Job common;
typedef struct BlockdevCreateCo {
BlockDriver *drv;
BlockdevCreateOptions *opts;
} BlockdevCreateJob;
static int coroutine_fn blockdev_create_run(Job *job, Error **errp)
{
BlockdevCreateJob *s = container_of(job, BlockdevCreateJob, common);
int ret;
Error **errp;
} BlockdevCreateCo;
job_progress_set_remaining(&s->common, 1);
ret = s->drv->bdrv_co_create(s->opts, errp);
job_progress_update(&s->common, 1);
qapi_free_BlockdevCreateOptions(s->opts);
return ret;
static void coroutine_fn bdrv_co_create_co_entry(void *opaque)
{
BlockdevCreateCo *cco = opaque;
cco->ret = cco->drv->bdrv_co_create(cco->opts, cco->errp);
}
static const JobDriver blockdev_create_job_driver = {
.instance_size = sizeof(BlockdevCreateJob),
.job_type = JOB_TYPE_CREATE,
.run = blockdev_create_run,
};
void qmp_blockdev_create(const char *job_id, BlockdevCreateOptions *options,
Error **errp)
void qmp_x_blockdev_create(BlockdevCreateOptions *options, Error **errp)
{
BlockdevCreateJob *s;
const char *fmt = BlockdevDriver_str(options->driver);
BlockDriver *drv = bdrv_find_format(fmt);
Coroutine *co;
BlockdevCreateCo cco;
/* If the driver is in the schema, we know that it exists. But it may not
* be whitelisted. */
@@ -71,24 +55,22 @@ void qmp_blockdev_create(const char *job_id, BlockdevCreateOptions *options,
return;
}
/* Error out if the driver doesn't support .bdrv_co_create */
/* Call callback if it exists */
if (!drv->bdrv_co_create) {
error_setg(errp, "Driver does not support blockdev-create");
return;
}
/* Create the block job */
/* TODO Running in the main context. Block drivers need to error out or add
* locking when they use a BDS in a different AioContext. */
s = job_create(job_id, &blockdev_create_job_driver, NULL,
qemu_get_aio_context(), JOB_DEFAULT | JOB_MANUAL_DISMISS,
NULL, NULL, errp);
if (!s) {
return;
cco = (BlockdevCreateCo) {
.drv = drv,
.opts = options,
.ret = -EINPROGRESS,
.errp = errp,
};
co = qemu_coroutine_create(bdrv_co_create_co_entry, &cco);
qemu_coroutine_enter(co);
while (cco.ret == -EINPROGRESS) {
aio_poll(qemu_get_aio_context(), true);
}
s->drv = drv,
s->opts = QAPI_CLONE(BlockdevCreateOptions, options),
job_start(&s->common);
}

View File

@@ -21,15 +21,15 @@
#include "qemu/osdep.h"
#include "block/block_int.h"
#include "block/qdict.h"
#include "sysemu/block-backend.h"
#include "crypto/block.h"
#include "qapi/opts-visitor.h"
#include "qapi/qapi-visit-crypto.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qobject-input-visitor.h"
#include "qapi/error.h"
#include "qemu/option.h"
#include "crypto.h"
#include "block/crypto.h"
typedef struct BlockCrypto BlockCrypto;
@@ -148,36 +148,102 @@ static QemuOptsList block_crypto_create_opts_luks = {
QCryptoBlockOpenOptions *
block_crypto_open_opts_init(QDict *opts, Error **errp)
block_crypto_open_opts_init(QCryptoBlockFormat format,
QDict *opts,
Error **errp)
{
Visitor *v;
QCryptoBlockOpenOptions *ret;
QCryptoBlockOpenOptions *ret = NULL;
Error *local_err = NULL;
v = qobject_input_visitor_new_flat_confused(opts, errp);
if (!v) {
return NULL;
ret = g_new0(QCryptoBlockOpenOptions, 1);
ret->format = format;
v = qobject_input_visitor_new_keyval(QOBJECT(opts));
visit_start_struct(v, NULL, NULL, 0, &local_err);
if (local_err) {
goto out;
}
visit_type_QCryptoBlockOpenOptions(v, NULL, &ret, errp);
switch (format) {
case Q_CRYPTO_BLOCK_FORMAT_LUKS:
visit_type_QCryptoBlockOptionsLUKS_members(
v, &ret->u.luks, &local_err);
break;
case Q_CRYPTO_BLOCK_FORMAT_QCOW:
visit_type_QCryptoBlockOptionsQCow_members(
v, &ret->u.qcow, &local_err);
break;
default:
error_setg(&local_err, "Unsupported block format %d", format);
break;
}
if (!local_err) {
visit_check_struct(v, &local_err);
}
visit_end_struct(v, NULL);
out:
if (local_err) {
error_propagate(errp, local_err);
qapi_free_QCryptoBlockOpenOptions(ret);
ret = NULL;
}
visit_free(v);
return ret;
}
QCryptoBlockCreateOptions *
block_crypto_create_opts_init(QDict *opts, Error **errp)
block_crypto_create_opts_init(QCryptoBlockFormat format,
QDict *opts,
Error **errp)
{
Visitor *v;
QCryptoBlockCreateOptions *ret;
QCryptoBlockCreateOptions *ret = NULL;
Error *local_err = NULL;
v = qobject_input_visitor_new_flat_confused(opts, errp);
if (!v) {
return NULL;
ret = g_new0(QCryptoBlockCreateOptions, 1);
ret->format = format;
v = qobject_input_visitor_new_keyval(QOBJECT(opts));
visit_start_struct(v, NULL, NULL, 0, &local_err);
if (local_err) {
goto out;
}
visit_type_QCryptoBlockCreateOptions(v, NULL, &ret, errp);
switch (format) {
case Q_CRYPTO_BLOCK_FORMAT_LUKS:
visit_type_QCryptoBlockCreateOptionsLUKS_members(
v, &ret->u.luks, &local_err);
break;
case Q_CRYPTO_BLOCK_FORMAT_QCOW:
visit_type_QCryptoBlockOptionsQCow_members(
v, &ret->u.qcow, &local_err);
break;
default:
error_setg(&local_err, "Unsupported block format %d", format);
break;
}
if (!local_err) {
visit_check_struct(v, &local_err);
}
visit_end_struct(v, NULL);
out:
if (local_err) {
error_propagate(errp, local_err);
qapi_free_QCryptoBlockCreateOptions(ret);
ret = NULL;
}
visit_free(v);
return ret;
}
@@ -215,9 +281,8 @@ static int block_crypto_open_generic(QCryptoBlockFormat format,
}
cryptoopts = qemu_opts_to_qdict(opts, NULL);
qdict_put_str(cryptoopts, "format", QCryptoBlockFormat_str(format));
open_opts = block_crypto_open_opts_init(cryptoopts, errp);
open_opts = block_crypto_open_opts_init(format, cryptoopts, errp);
if (!open_opts) {
goto cleanup;
}
@@ -229,7 +294,6 @@ static int block_crypto_open_generic(QCryptoBlockFormat format,
block_crypto_read_func,
bs,
cflags,
1,
errp);
if (!crypto->block) {
@@ -241,7 +305,7 @@ static int block_crypto_open_generic(QCryptoBlockFormat format,
ret = 0;
cleanup:
qobject_unref(cryptoopts);
QDECREF(cryptoopts);
qapi_free_QCryptoBlockOpenOptions(open_opts);
return ret;
}
@@ -287,9 +351,8 @@ static int block_crypto_co_create_generic(BlockDriverState *bs,
return ret;
}
static int coroutine_fn
block_crypto_co_truncate(BlockDriverState *bs, int64_t offset,
PreallocMode prealloc, Error **errp)
static int block_crypto_truncate(BlockDriverState *bs, int64_t offset,
PreallocMode prealloc, Error **errp)
{
BlockCrypto *crypto = bs->opaque;
uint64_t payload_offset =
@@ -302,7 +365,7 @@ block_crypto_co_truncate(BlockDriverState *bs, int64_t offset,
offset += payload_offset;
return bdrv_co_truncate(bs->file, offset, prealloc, errp);
return bdrv_truncate(bs->file, offset, prealloc, errp);
}
static void block_crypto_close(BlockDriverState *bs)
@@ -542,8 +605,8 @@ static int coroutine_fn block_crypto_co_create_opts_luks(const char *filename,
&block_crypto_create_opts_luks,
true);
qdict_put_str(cryptoopts, "format", "luks");
create_opts = block_crypto_create_opts_init(cryptoopts, errp);
create_opts = block_crypto_create_opts_init(Q_CRYPTO_BLOCK_FORMAT_LUKS,
cryptoopts, errp);
if (!create_opts) {
ret = -EINVAL;
goto fail;
@@ -552,7 +615,7 @@ static int coroutine_fn block_crypto_co_create_opts_luks(const char *filename,
/* Create protocol layer */
ret = bdrv_create_file(filename, opts, errp);
if (ret < 0) {
goto fail;
return ret;
}
bs = bdrv_open(filename, NULL, NULL,
@@ -572,7 +635,7 @@ static int coroutine_fn block_crypto_co_create_opts_luks(const char *filename,
fail:
bdrv_unref(bs);
qapi_free_QCryptoBlockCreateOptions(create_opts);
qobject_unref(cryptoopts);
QDECREF(cryptoopts);
return ret;
}
@@ -594,17 +657,20 @@ static int block_crypto_get_info_luks(BlockDriverState *bs,
}
static ImageInfoSpecific *
block_crypto_get_specific_info_luks(BlockDriverState *bs, Error **errp)
block_crypto_get_specific_info_luks(BlockDriverState *bs)
{
BlockCrypto *crypto = bs->opaque;
ImageInfoSpecific *spec_info;
QCryptoBlockInfo *info;
info = qcrypto_block_get_info(crypto->block, errp);
info = qcrypto_block_get_info(crypto->block, NULL);
if (!info) {
return NULL;
}
assert(info->format == Q_CRYPTO_BLOCK_FORMAT_LUKS);
if (info->format != Q_CRYPTO_BLOCK_FORMAT_LUKS) {
qapi_free_QCryptoBlockInfo(info);
return NULL;
}
spec_info = g_new(ImageInfoSpecific, 1);
spec_info->type = IMAGE_INFO_SPECIFIC_KIND_LUKS;
@@ -619,24 +685,16 @@ block_crypto_get_specific_info_luks(BlockDriverState *bs, Error **errp)
return spec_info;
}
static const char *const block_crypto_strong_runtime_opts[] = {
BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET,
NULL
};
static BlockDriver bdrv_crypto_luks = {
BlockDriver bdrv_crypto_luks = {
.format_name = "luks",
.instance_size = sizeof(BlockCrypto),
.bdrv_probe = block_crypto_probe_luks,
.bdrv_open = block_crypto_open_luks,
.bdrv_close = block_crypto_close,
/* This driver doesn't modify LUKS metadata except when creating image.
* Allow share-rw=on as a special case. */
.bdrv_child_perm = bdrv_filter_default_perms,
.bdrv_child_perm = bdrv_format_default_perms,
.bdrv_co_create = block_crypto_co_create_luks,
.bdrv_co_create_opts = block_crypto_co_create_opts_luks,
.bdrv_co_truncate = block_crypto_co_truncate,
.bdrv_truncate = block_crypto_truncate,
.create_opts = &block_crypto_create_opts_luks,
.bdrv_reopen_prepare = block_crypto_reopen_prepare,
@@ -646,8 +704,6 @@ static BlockDriver bdrv_crypto_luks = {
.bdrv_getlength = block_crypto_getlength,
.bdrv_get_info = block_crypto_get_info_luks,
.bdrv_get_specific_info = block_crypto_get_specific_info_luks,
.strong_runtime_opts = block_crypto_strong_runtime_opts,
};
static void block_crypto_init(void)

View File

@@ -89,9 +89,13 @@
}
QCryptoBlockCreateOptions *
block_crypto_create_opts_init(QDict *opts, Error **errp);
block_crypto_create_opts_init(QCryptoBlockFormat format,
QDict *opts,
Error **errp);
QCryptoBlockOpenOptions *
block_crypto_open_opts_init(QDict *opts, Error **errp);
block_crypto_open_opts_init(QCryptoBlockFormat format,
QDict *opts,
Error **errp);
#endif /* BLOCK_CRYPTO_H__ */

View File

@@ -32,10 +32,22 @@
#include "crypto/secret.h"
#include <curl/curl.h>
#include "qemu/cutils.h"
#include "trace.h"
// #define DEBUG_CURL
// #define DEBUG_VERBOSE
#ifdef DEBUG_CURL
#define DEBUG_CURL_PRINT 1
#else
#define DEBUG_CURL_PRINT 0
#endif
#define DPRINTF(fmt, ...) \
do { \
if (DEBUG_CURL_PRINT) { \
fprintf(stderr, fmt, ## __VA_ARGS__); \
} \
} while (0)
#if LIBCURL_VERSION_NUM >= 0x071000
/* The multi interface timer callback was introduced in 7.16.0 */
#define NEED_CURL_TIMER_CALLBACK
@@ -61,6 +73,8 @@ static CURLMcode __curl_multi_socket_action(CURLM *multi_handle,
#define CURL_NUM_STATES 8
#define CURL_NUM_ACB 8
#define READ_AHEAD_DEFAULT (256 * 1024)
#define CURL_TIMEOUT_DEFAULT 5
#define CURL_TIMEOUT_MAX 10000
#define CURL_BLOCK_OPT_URL "url"
@@ -74,10 +88,6 @@ static CURLMcode __curl_multi_socket_action(CURLM *multi_handle,
#define CURL_BLOCK_OPT_PROXY_USERNAME "proxy-username"
#define CURL_BLOCK_OPT_PROXY_PASSWORD_SECRET "proxy-password-secret"
#define CURL_BLOCK_OPT_READAHEAD_DEFAULT (256 * 1024)
#define CURL_BLOCK_OPT_SSLVERIFY_DEFAULT true
#define CURL_BLOCK_OPT_TIMEOUT_DEFAULT 5
struct BDRVCURLState;
static bool libcurl_initialized;
@@ -144,7 +154,7 @@ static int curl_timer_cb(CURLM *multi, long timeout_ms, void *opaque)
{
BDRVCURLState *s = opaque;
trace_curl_timer_cb(timeout_ms);
DPRINTF("CURL: timer callback timeout_ms %ld\n", timeout_ms);
if (timeout_ms == -1) {
timer_del(&s->timer);
} else {
@@ -183,7 +193,7 @@ static int curl_sock_cb(CURL *curl, curl_socket_t fd, int action,
}
socket = NULL;
trace_curl_sock_cb(action, (int)fd);
DPRINTF("CURL (AIO): Sock action %d on fd %d\n", action, (int)fd);
switch (action) {
case CURL_POLL_IN:
aio_set_fd_handler(s->aio_context, fd, false,
@@ -228,7 +238,7 @@ static size_t curl_read_cb(void *ptr, size_t size, size_t nmemb, void *opaque)
size_t realsize = size * nmemb;
int i;
trace_curl_read_cb(realsize);
DPRINTF("CURL: Just reading %zd bytes\n", realsize);
if (!s || !s->orig_buf) {
goto read_end;
@@ -473,8 +483,6 @@ static int curl_init_state(BDRVCURLState *s, CURLState *state)
curl_easy_setopt(state->curl, CURLOPT_URL, s->url);
curl_easy_setopt(state->curl, CURLOPT_SSL_VERIFYPEER,
(long) s->sslverify);
curl_easy_setopt(state->curl, CURLOPT_SSL_VERIFYHOST,
s->sslverify ? 2L : 0L);
if (s->cookie) {
curl_easy_setopt(state->curl, CURLOPT_COOKIE, s->cookie);
}
@@ -674,10 +682,10 @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags,
const char *protocol_delimiter;
int ret;
ret = bdrv_apply_auto_read_only(bs, "curl driver does not support writes",
errp);
if (ret < 0) {
return ret;
if (flags & BDRV_O_RDWR) {
error_setg(errp, "curl block device does not support writes");
return -EROFS;
}
if (!libcurl_initialized) {
@@ -698,7 +706,7 @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags,
}
s->readahead_size = qemu_opt_get_size(opts, CURL_BLOCK_OPT_READAHEAD,
CURL_BLOCK_OPT_READAHEAD_DEFAULT);
READ_AHEAD_DEFAULT);
if ((s->readahead_size & 0x1ff) != 0) {
error_setg(errp, "HTTP_READAHEAD_SIZE %zd is not a multiple of 512",
s->readahead_size);
@@ -706,14 +714,13 @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags,
}
s->timeout = qemu_opt_get_number(opts, CURL_BLOCK_OPT_TIMEOUT,
CURL_BLOCK_OPT_TIMEOUT_DEFAULT);
CURL_TIMEOUT_DEFAULT);
if (s->timeout > CURL_TIMEOUT_MAX) {
error_setg(errp, "timeout parameter is too large or negative");
goto out_noclean;
}
s->sslverify = qemu_opt_get_bool(opts, CURL_BLOCK_OPT_SSLVERIFY,
CURL_BLOCK_OPT_SSLVERIFY_DEFAULT);
s->sslverify = qemu_opt_get_bool(opts, CURL_BLOCK_OPT_SSLVERIFY, true);
cookie = qemu_opt_get(opts, CURL_BLOCK_OPT_COOKIE);
cookie_secret = qemu_opt_get(opts, CURL_BLOCK_OPT_COOKIE_SECRET);
@@ -768,7 +775,7 @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags,
}
}
trace_curl_open(file);
DPRINTF("CURL: Opening %s\n", file);
qemu_co_queue_init(&s->free_state_waitq);
s->aio_context = bdrv_get_aio_context(bs);
s->url = g_strdup(file);
@@ -797,7 +804,7 @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags,
}
/* Prior CURL 7.19.4 return value of 0 could mean that the file size is not
* know or the size is zero. From 7.19.4 CURL returns -1 if size is not
* known and zero if it is really zero-length file. */
* known and zero if it is realy zero-length file. */
#if LIBCURL_VERSION_NUM >= 0x071304
if (d < 0) {
pstrcpy(state->errmsg, CURL_ERROR_SIZE,
@@ -821,7 +828,7 @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags,
"Server does not support 'range' (byte ranges).");
goto out;
}
trace_curl_open_size(s->len);
DPRINTF("CURL: Size = %" PRIu64 "\n", s->len);
qemu_mutex_lock(&s->mutex);
curl_clean_state(state);
@@ -899,7 +906,8 @@ static void curl_setup_preadv(BlockDriverState *bs, CURLAIOCB *acb)
state->acb[0] = acb;
snprintf(state->range, 127, "%" PRIu64 "-%" PRIu64, start, end);
trace_curl_setup_preadv(acb->bytes, start, state->range);
DPRINTF("CURL (AIO): Reading %" PRIu64 " at %" PRIu64 " (%s)\n",
acb->bytes, start, state->range);
curl_easy_setopt(state->curl, CURLOPT_RANGE, state->range);
curl_multi_add_handle(s->multi, state->curl);
@@ -933,7 +941,7 @@ static void curl_close(BlockDriverState *bs)
{
BDRVCURLState *s = bs->opaque;
trace_curl_close();
DPRINTF("CURL: Close\n");
curl_detach_aio_context(bs);
qemu_mutex_destroy(&s->mutex);
@@ -950,36 +958,6 @@ static int64_t curl_getlength(BlockDriverState *bs)
return s->len;
}
static void curl_refresh_filename(BlockDriverState *bs)
{
BDRVCURLState *s = bs->opaque;
/* "readahead" and "timeout" do not change the guest-visible data,
* so ignore them */
if (s->sslverify != CURL_BLOCK_OPT_SSLVERIFY_DEFAULT ||
s->cookie || s->username || s->password || s->proxyusername ||
s->proxypassword)
{
return;
}
pstrcpy(bs->exact_filename, sizeof(bs->exact_filename), s->url);
}
static const char *const curl_strong_runtime_opts[] = {
CURL_BLOCK_OPT_URL,
CURL_BLOCK_OPT_SSLVERIFY,
CURL_BLOCK_OPT_COOKIE,
CURL_BLOCK_OPT_COOKIE_SECRET,
CURL_BLOCK_OPT_USERNAME,
CURL_BLOCK_OPT_PASSWORD_SECRET,
CURL_BLOCK_OPT_PROXY_USERNAME,
CURL_BLOCK_OPT_PROXY_PASSWORD_SECRET,
NULL
};
static BlockDriver bdrv_http = {
.format_name = "http",
.protocol_name = "http",
@@ -994,9 +972,6 @@ static BlockDriver bdrv_http = {
.bdrv_detach_aio_context = curl_detach_aio_context,
.bdrv_attach_aio_context = curl_attach_aio_context,
.bdrv_refresh_filename = curl_refresh_filename,
.strong_runtime_opts = curl_strong_runtime_opts,
};
static BlockDriver bdrv_https = {
@@ -1013,9 +988,6 @@ static BlockDriver bdrv_https = {
.bdrv_detach_aio_context = curl_detach_aio_context,
.bdrv_attach_aio_context = curl_attach_aio_context,
.bdrv_refresh_filename = curl_refresh_filename,
.strong_runtime_opts = curl_strong_runtime_opts,
};
static BlockDriver bdrv_ftp = {
@@ -1032,9 +1004,6 @@ static BlockDriver bdrv_ftp = {
.bdrv_detach_aio_context = curl_detach_aio_context,
.bdrv_attach_aio_context = curl_attach_aio_context,
.bdrv_refresh_filename = curl_refresh_filename,
.strong_runtime_opts = curl_strong_runtime_opts,
};
static BlockDriver bdrv_ftps = {
@@ -1051,9 +1020,6 @@ static BlockDriver bdrv_ftps = {
.bdrv_detach_aio_context = curl_detach_aio_context,
.bdrv_attach_aio_context = curl_attach_aio_context,
.bdrv_refresh_filename = curl_refresh_filename,
.strong_runtime_opts = curl_strong_runtime_opts,
};
static void curl_block_init(void)

View File

@@ -28,12 +28,21 @@
#include "block/block_int.h"
#include "block/blockjob.h"
/**
* A BdrvDirtyBitmap can be in three possible states:
* (1) successor is NULL and disabled is false: full r/w mode
* (2) successor is NULL and disabled is true: read only mode ("disabled")
* (3) successor is set: frozen mode.
* A frozen bitmap cannot be renamed, deleted, anonymized, cleared, set,
* or enabled. A frozen bitmap can only abdicate() or reclaim().
*/
struct BdrvDirtyBitmap {
QemuMutex *mutex;
HBitmap *bitmap; /* Dirty bitmap implementation */
HBitmap *meta; /* Meta dirty bitmap */
bool busy; /* Bitmap is busy, it can't be used via QMP */
BdrvDirtyBitmap *successor; /* Anonymous child, if any. */
bool qmp_locked; /* Bitmap is locked, it can't be modified
through QMP */
BdrvDirtyBitmap *successor; /* Anonymous child; implies frozen status */
char *name; /* Optional non-empty unique ID */
int64_t size; /* Size of the bitmap, in bytes */
bool disabled; /* Bitmap is disabled. It ignores all writes to
@@ -46,13 +55,6 @@ struct BdrvDirtyBitmap {
and this bitmap must remain unchanged while
this flag is set. */
bool persistent; /* bitmap must be saved to owner disk image */
bool inconsistent; /* bitmap is persistent, but inconsistent.
It cannot be used at all in any way, except
a QMP user can remove it. */
bool migration; /* Bitmap is selected for migration, it should
not be stored on the next inactivation
(persistent flag doesn't matter until next
invalidation).*/
QLIST_ENTRY(BdrvDirtyBitmap) list;
};
@@ -95,6 +97,15 @@ BdrvDirtyBitmap *bdrv_find_dirty_bitmap(BlockDriverState *bs, const char *name)
return NULL;
}
/* Called with BQL taken. */
void bdrv_dirty_bitmap_make_anon(BdrvDirtyBitmap *bitmap)
{
assert(!bdrv_dirty_bitmap_frozen(bitmap));
g_free(bitmap->name);
bitmap->name = NULL;
bitmap->persistent = false;
}
/* Called with BQL taken. */
BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs,
uint32_t granularity,
@@ -169,58 +180,35 @@ const char *bdrv_dirty_bitmap_name(const BdrvDirtyBitmap *bitmap)
}
/* Called with BQL taken. */
bool bdrv_dirty_bitmap_has_successor(BdrvDirtyBitmap *bitmap)
bool bdrv_dirty_bitmap_frozen(BdrvDirtyBitmap *bitmap)
{
return bitmap->successor;
}
static bool bdrv_dirty_bitmap_busy(const BdrvDirtyBitmap *bitmap)
{
return bitmap->busy;
}
void bdrv_dirty_bitmap_set_busy(BdrvDirtyBitmap *bitmap, bool busy)
void bdrv_dirty_bitmap_set_qmp_locked(BdrvDirtyBitmap *bitmap, bool qmp_locked)
{
qemu_mutex_lock(bitmap->mutex);
bitmap->busy = busy;
bitmap->qmp_locked = qmp_locked;
qemu_mutex_unlock(bitmap->mutex);
}
bool bdrv_dirty_bitmap_qmp_locked(BdrvDirtyBitmap *bitmap)
{
return bitmap->qmp_locked;
}
/* Called with BQL taken. */
bool bdrv_dirty_bitmap_enabled(BdrvDirtyBitmap *bitmap)
{
return !bitmap->disabled;
return !(bitmap->disabled || bitmap->successor);
}
/**
* bdrv_dirty_bitmap_status: This API is now deprecated.
* Called with BQL taken.
*
* A BdrvDirtyBitmap can be in four possible user-visible states:
* (1) Active: successor is NULL, and disabled is false: full r/w mode
* (2) Disabled: successor is NULL, and disabled is true: qualified r/w mode,
* guest writes are dropped, but monitor writes are possible,
* through commands like merge and clear.
* (3) Frozen: successor is not NULL.
* A frozen bitmap cannot be renamed, deleted, cleared, set,
* enabled, merged to, etc. A frozen bitmap can only abdicate()
* or reclaim().
* In this state, the anonymous successor bitmap may be either
* Active and recording writes from the guest (e.g. backup jobs),
* or it can be Disabled and not recording writes.
* (4) Locked: Whether Active or Disabled, the user cannot modify this bitmap
* in any way from the monitor.
* (5) Inconsistent: This is a persistent bitmap whose "in use" bit is set, and
* is unusable by QEMU. It can be deleted to remove it from
* the qcow2.
*/
/* Called with BQL taken. */
DirtyBitmapStatus bdrv_dirty_bitmap_status(BdrvDirtyBitmap *bitmap)
{
if (bdrv_dirty_bitmap_inconsistent(bitmap)) {
return DIRTY_BITMAP_STATUS_INCONSISTENT;
} else if (bdrv_dirty_bitmap_has_successor(bitmap)) {
if (bdrv_dirty_bitmap_frozen(bitmap)) {
return DIRTY_BITMAP_STATUS_FROZEN;
} else if (bdrv_dirty_bitmap_busy(bitmap)) {
} else if (bdrv_dirty_bitmap_qmp_locked(bitmap)) {
return DIRTY_BITMAP_STATUS_LOCKED;
} else if (!bdrv_dirty_bitmap_enabled(bitmap)) {
return DIRTY_BITMAP_STATUS_DISABLED;
@@ -229,44 +217,9 @@ DirtyBitmapStatus bdrv_dirty_bitmap_status(BdrvDirtyBitmap *bitmap)
}
}
/* Called with BQL taken. */
static bool bdrv_dirty_bitmap_recording(BdrvDirtyBitmap *bitmap)
{
return !bitmap->disabled || (bitmap->successor &&
!bitmap->successor->disabled);
}
int bdrv_dirty_bitmap_check(const BdrvDirtyBitmap *bitmap, uint32_t flags,
Error **errp)
{
if ((flags & BDRV_BITMAP_BUSY) && bdrv_dirty_bitmap_busy(bitmap)) {
error_setg(errp, "Bitmap '%s' is currently in use by another"
" operation and cannot be used", bitmap->name);
return -1;
}
if ((flags & BDRV_BITMAP_RO) && bdrv_dirty_bitmap_readonly(bitmap)) {
error_setg(errp, "Bitmap '%s' is readonly and cannot be modified",
bitmap->name);
return -1;
}
if ((flags & BDRV_BITMAP_INCONSISTENT) &&
bdrv_dirty_bitmap_inconsistent(bitmap)) {
error_setg(errp, "Bitmap '%s' is inconsistent and cannot be used",
bitmap->name);
error_append_hint(errp, "Try block-dirty-bitmap-remove to delete"
" this bitmap from disk");
return -1;
}
return 0;
}
/**
* Create a successor bitmap destined to replace this bitmap after an operation.
* Requires that the bitmap is not marked busy and has no successor.
* The successor will be enabled if the parent bitmap was.
* Requires that the bitmap is not frozen and has no successor.
* Called with BQL taken.
*/
int bdrv_dirty_bitmap_create_successor(BlockDriverState *bs,
@@ -275,14 +228,12 @@ int bdrv_dirty_bitmap_create_successor(BlockDriverState *bs,
uint64_t granularity;
BdrvDirtyBitmap *child;
if (bdrv_dirty_bitmap_check(bitmap, BDRV_BITMAP_BUSY, errp)) {
return -1;
}
if (bdrv_dirty_bitmap_has_successor(bitmap)) {
error_setg(errp, "Cannot create a successor for a bitmap that already "
"has one");
if (bdrv_dirty_bitmap_frozen(bitmap)) {
error_setg(errp, "Cannot create a successor for a bitmap that is "
"currently frozen");
return -1;
}
assert(!bitmap->successor);
/* Create an anonymous successor */
granularity = bdrv_dirty_bitmap_granularity(bitmap);
@@ -293,39 +244,63 @@ int bdrv_dirty_bitmap_create_successor(BlockDriverState *bs,
/* Successor will be on or off based on our current state. */
child->disabled = bitmap->disabled;
bitmap->disabled = true;
/* Install the successor and mark the parent as busy */
/* Install the successor and freeze the parent */
bitmap->successor = child;
bitmap->busy = true;
return 0;
}
void bdrv_enable_dirty_bitmap_locked(BdrvDirtyBitmap *bitmap)
{
bitmap->disabled = false;
}
/* Called with BQL taken. */
void bdrv_dirty_bitmap_enable_successor(BdrvDirtyBitmap *bitmap)
{
assert(bitmap->mutex == bitmap->successor->mutex);
qemu_mutex_lock(bitmap->mutex);
bdrv_enable_dirty_bitmap_locked(bitmap->successor);
bdrv_enable_dirty_bitmap(bitmap->successor);
qemu_mutex_unlock(bitmap->mutex);
}
/* Called within bdrv_dirty_bitmap_lock..unlock and with BQL taken. */
static void bdrv_release_dirty_bitmap_locked(BdrvDirtyBitmap *bitmap)
/* Called within bdrv_dirty_bitmap_lock..unlock */
static void bdrv_do_release_matching_dirty_bitmap_locked(
BlockDriverState *bs, BdrvDirtyBitmap *bitmap,
bool (*cond)(BdrvDirtyBitmap *bitmap))
{
assert(!bitmap->active_iterators);
assert(!bdrv_dirty_bitmap_busy(bitmap));
assert(!bdrv_dirty_bitmap_has_successor(bitmap));
assert(!bitmap->meta);
QLIST_REMOVE(bitmap, list);
hbitmap_free(bitmap->bitmap);
g_free(bitmap->name);
g_free(bitmap);
BdrvDirtyBitmap *bm, *next;
QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
if ((!bitmap || bm == bitmap) && (!cond || cond(bm))) {
assert(!bm->active_iterators);
assert(!bdrv_dirty_bitmap_frozen(bm));
assert(!bm->meta);
QLIST_REMOVE(bm, list);
hbitmap_free(bm->bitmap);
g_free(bm->name);
g_free(bm);
if (bitmap) {
return;
}
}
}
if (bitmap) {
abort();
}
}
/* Called with BQL taken. */
static void bdrv_do_release_matching_dirty_bitmap(
BlockDriverState *bs, BdrvDirtyBitmap *bitmap,
bool (*cond)(BdrvDirtyBitmap *bitmap))
{
bdrv_dirty_bitmaps_lock(bs);
bdrv_do_release_matching_dirty_bitmap_locked(bs, bitmap, cond);
bdrv_dirty_bitmaps_unlock(bs);
}
/* Called within bdrv_dirty_bitmap_lock..unlock */
static void bdrv_release_dirty_bitmap_locked(BlockDriverState *bs,
BdrvDirtyBitmap *bitmap)
{
bdrv_do_release_matching_dirty_bitmap_locked(bs, bitmap, NULL);
}
/**
@@ -352,7 +327,6 @@ BdrvDirtyBitmap *bdrv_dirty_bitmap_abdicate(BlockDriverState *bs,
bitmap->successor = NULL;
successor->persistent = bitmap->persistent;
bitmap->persistent = false;
bitmap->busy = false;
bdrv_release_dirty_bitmap(bs, bitmap);
return successor;
@@ -361,8 +335,7 @@ BdrvDirtyBitmap *bdrv_dirty_bitmap_abdicate(BlockDriverState *bs,
/**
* In cases of failure where we can no longer safely delete the parent,
* we may wish to re-join the parent and child/successor.
* The merged parent will be marked as not busy.
* The marged parent will be enabled if and only if the successor was enabled.
* The merged parent will be un-frozen, but not explicitly re-enabled.
* Called within bdrv_dirty_bitmap_lock..unlock and with BQL taken.
*/
BdrvDirtyBitmap *bdrv_reclaim_dirty_bitmap_locked(BlockDriverState *bs,
@@ -376,14 +349,11 @@ BdrvDirtyBitmap *bdrv_reclaim_dirty_bitmap_locked(BlockDriverState *bs,
return NULL;
}
if (!hbitmap_merge(parent->bitmap, successor->bitmap, parent->bitmap)) {
if (!hbitmap_merge(parent->bitmap, successor->bitmap)) {
error_setg(errp, "Merging of parent and successor bitmap failed");
return NULL;
}
parent->disabled = successor->disabled;
parent->busy = false;
bdrv_release_dirty_bitmap_locked(successor);
bdrv_release_dirty_bitmap_locked(bs, successor);
parent->successor = NULL;
return parent;
@@ -413,8 +383,7 @@ void bdrv_dirty_bitmap_truncate(BlockDriverState *bs, int64_t bytes)
bdrv_dirty_bitmaps_lock(bs);
QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
assert(!bdrv_dirty_bitmap_busy(bitmap));
assert(!bdrv_dirty_bitmap_has_successor(bitmap));
assert(!bdrv_dirty_bitmap_frozen(bitmap));
assert(!bitmap->active_iterators);
hbitmap_truncate(bitmap->bitmap, bytes);
bitmap->size = bytes;
@@ -422,31 +391,38 @@ void bdrv_dirty_bitmap_truncate(BlockDriverState *bs, int64_t bytes)
bdrv_dirty_bitmaps_unlock(bs);
}
static bool bdrv_dirty_bitmap_has_name(BdrvDirtyBitmap *bitmap)
{
return !!bdrv_dirty_bitmap_name(bitmap);
}
/* Called with BQL taken. */
void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
{
bdrv_dirty_bitmaps_lock(bs);
bdrv_release_dirty_bitmap_locked(bitmap);
bdrv_dirty_bitmaps_unlock(bs);
bdrv_do_release_matching_dirty_bitmap(bs, bitmap, NULL);
}
/**
* Release all named dirty bitmaps attached to a BDS (for use in bdrv_close()).
* There must not be any busy bitmaps attached.
* There must not be any frozen bitmaps attached.
* This function does not remove persistent bitmaps from the storage.
* Called with BQL taken.
*/
void bdrv_release_named_dirty_bitmaps(BlockDriverState *bs)
{
BdrvDirtyBitmap *bm, *next;
bdrv_do_release_matching_dirty_bitmap(bs, NULL, bdrv_dirty_bitmap_has_name);
}
bdrv_dirty_bitmaps_lock(bs);
QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
if (bdrv_dirty_bitmap_name(bm)) {
bdrv_release_dirty_bitmap_locked(bm);
}
}
bdrv_dirty_bitmaps_unlock(bs);
/**
* Release all persistent dirty bitmaps attached to a BDS (for use in
* bdrv_inactivate_recurse()).
* There must not be any frozen bitmaps attached.
* This function does not remove persistent bitmaps from the storage.
*/
void bdrv_release_persistent_dirty_bitmaps(BlockDriverState *bs)
{
bdrv_do_release_matching_dirty_bitmap(bs, NULL,
bdrv_dirty_bitmap_get_persistance);
}
/**
@@ -466,18 +442,18 @@ void bdrv_remove_persistent_dirty_bitmap(BlockDriverState *bs,
}
}
/* Called with BQL taken. */
void bdrv_disable_dirty_bitmap(BdrvDirtyBitmap *bitmap)
{
bdrv_dirty_bitmap_lock(bitmap);
assert(!bdrv_dirty_bitmap_frozen(bitmap));
bitmap->disabled = true;
bdrv_dirty_bitmap_unlock(bitmap);
}
/* Called with BQL taken. */
void bdrv_enable_dirty_bitmap(BdrvDirtyBitmap *bitmap)
{
bdrv_dirty_bitmap_lock(bitmap);
bdrv_enable_dirty_bitmap_locked(bitmap);
bdrv_dirty_bitmap_unlock(bitmap);
assert(!bdrv_dirty_bitmap_frozen(bitmap));
bitmap->disabled = false;
}
BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
@@ -495,11 +471,6 @@ BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
info->has_name = !!bm->name;
info->name = g_strdup(bm->name);
info->status = bdrv_dirty_bitmap_status(bm);
info->recording = bdrv_dirty_bitmap_recording(bm);
info->busy = bdrv_dirty_bitmap_busy(bm);
info->persistent = bm->persistent;
info->has_inconsistent = bm->inconsistent;
info->inconsistent = bm->inconsistent;
entry->value = info;
*plist = entry;
plist = &entry->next;
@@ -582,6 +553,7 @@ int64_t bdrv_dirty_iter_next(BdrvDirtyBitmapIter *iter)
void bdrv_set_dirty_bitmap_locked(BdrvDirtyBitmap *bitmap,
int64_t offset, int64_t bytes)
{
assert(bdrv_dirty_bitmap_enabled(bitmap));
assert(!bdrv_dirty_bitmap_readonly(bitmap));
hbitmap_set(bitmap->bitmap, offset, bytes);
}
@@ -598,6 +570,7 @@ void bdrv_set_dirty_bitmap(BdrvDirtyBitmap *bitmap,
void bdrv_reset_dirty_bitmap_locked(BdrvDirtyBitmap *bitmap,
int64_t offset, int64_t bytes)
{
assert(bdrv_dirty_bitmap_enabled(bitmap));
assert(!bdrv_dirty_bitmap_readonly(bitmap));
hbitmap_reset(bitmap->bitmap, offset, bytes);
}
@@ -612,6 +585,7 @@ void bdrv_reset_dirty_bitmap(BdrvDirtyBitmap *bitmap,
void bdrv_clear_dirty_bitmap(BdrvDirtyBitmap *bitmap, HBitmap **out)
{
assert(bdrv_dirty_bitmap_enabled(bitmap));
assert(!bdrv_dirty_bitmap_readonly(bitmap));
bdrv_dirty_bitmap_lock(bitmap);
if (!out) {
@@ -625,11 +599,12 @@ void bdrv_clear_dirty_bitmap(BdrvDirtyBitmap *bitmap, HBitmap **out)
bdrv_dirty_bitmap_unlock(bitmap);
}
void bdrv_restore_dirty_bitmap(BdrvDirtyBitmap *bitmap, HBitmap *backup)
void bdrv_undo_clear_dirty_bitmap(BdrvDirtyBitmap *bitmap, HBitmap *in)
{
HBitmap *tmp = bitmap->bitmap;
assert(bdrv_dirty_bitmap_enabled(bitmap));
assert(!bdrv_dirty_bitmap_readonly(bitmap));
bitmap->bitmap = backup;
bitmap->bitmap = in;
hbitmap_free(tmp);
}
@@ -740,46 +715,23 @@ bool bdrv_has_readonly_bitmaps(BlockDriverState *bs)
}
/* Called with BQL taken. */
void bdrv_dirty_bitmap_set_persistence(BdrvDirtyBitmap *bitmap, bool persistent)
void bdrv_dirty_bitmap_set_persistance(BdrvDirtyBitmap *bitmap, bool persistent)
{
qemu_mutex_lock(bitmap->mutex);
bitmap->persistent = persistent;
qemu_mutex_unlock(bitmap->mutex);
}
/* Called with BQL taken. */
void bdrv_dirty_bitmap_set_inconsistent(BdrvDirtyBitmap *bitmap)
bool bdrv_dirty_bitmap_get_persistance(BdrvDirtyBitmap *bitmap)
{
qemu_mutex_lock(bitmap->mutex);
assert(bitmap->persistent == true);
bitmap->inconsistent = true;
bitmap->disabled = true;
qemu_mutex_unlock(bitmap->mutex);
}
/* Called with BQL taken. */
void bdrv_dirty_bitmap_set_migration(BdrvDirtyBitmap *bitmap, bool migration)
{
qemu_mutex_lock(bitmap->mutex);
bitmap->migration = migration;
qemu_mutex_unlock(bitmap->mutex);
}
bool bdrv_dirty_bitmap_get_persistence(BdrvDirtyBitmap *bitmap)
{
return bitmap->persistent && !bitmap->migration;
}
bool bdrv_dirty_bitmap_inconsistent(const BdrvDirtyBitmap *bitmap)
{
return bitmap->inconsistent;
return bitmap->persistent;
}
bool bdrv_has_changed_persistent_bitmaps(BlockDriverState *bs)
{
BdrvDirtyBitmap *bm;
QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
if (bm->persistent && !bm->readonly && !bm->migration) {
if (bm->persistent && !bm->readonly) {
return true;
}
}
@@ -799,50 +751,7 @@ char *bdrv_dirty_bitmap_sha256(const BdrvDirtyBitmap *bitmap, Error **errp)
return hbitmap_sha256(bitmap->bitmap, errp);
}
int64_t bdrv_dirty_bitmap_next_zero(BdrvDirtyBitmap *bitmap, uint64_t offset,
uint64_t bytes)
int64_t bdrv_dirty_bitmap_next_zero(BdrvDirtyBitmap *bitmap, uint64_t offset)
{
return hbitmap_next_zero(bitmap->bitmap, offset, bytes);
}
bool bdrv_dirty_bitmap_next_dirty_area(BdrvDirtyBitmap *bitmap,
uint64_t *offset, uint64_t *bytes)
{
return hbitmap_next_dirty_area(bitmap->bitmap, offset, bytes);
}
void bdrv_merge_dirty_bitmap(BdrvDirtyBitmap *dest, const BdrvDirtyBitmap *src,
HBitmap **backup, Error **errp)
{
bool ret;
/* only bitmaps from one bds are supported */
assert(dest->mutex == src->mutex);
qemu_mutex_lock(dest->mutex);
if (bdrv_dirty_bitmap_check(dest, BDRV_BITMAP_DEFAULT, errp)) {
goto out;
}
if (bdrv_dirty_bitmap_check(src, BDRV_BITMAP_ALLOW_RO, errp)) {
goto out;
}
if (!hbitmap_can_merge(dest->bitmap, src->bitmap)) {
error_setg(errp, "Bitmaps are incompatible and can't be merged");
goto out;
}
if (backup) {
*backup = dest->bitmap;
dest->bitmap = hbitmap_alloc(dest->size, hbitmap_granularity(*backup));
ret = hbitmap_merge(*backup, src->bitmap, dest->bitmap);
} else {
ret = hbitmap_merge(dest->bitmap, src->bitmap, dest->bitmap);
}
assert(ret);
out:
qemu_mutex_unlock(dest->mutex);
return hbitmap_next_zero(bitmap->bitmap, offset);
}

View File

@@ -1,49 +0,0 @@
/*
* DMG lzfse uncompression
*
* Copyright (c) 2018 Julio Cesar Faracco
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "dmg.h"
#include <lzfse.h>
static int dmg_uncompress_lzfse_do(char *next_in, unsigned int avail_in,
char *next_out, unsigned int avail_out)
{
size_t out_size = lzfse_decode_buffer((uint8_t *) next_out, avail_out,
(uint8_t *) next_in, avail_in,
NULL);
/* We need to decode the single chunk only. */
/* So, out_size == avail_out is not an error here. */
if (out_size > 0) {
return out_size;
}
return -1;
}
__attribute__((constructor))
static void dmg_lzfse_init(void)
{
assert(!dmg_uncompress_lzfse);
dmg_uncompress_lzfse = dmg_uncompress_lzfse_do;
}

View File

@@ -33,9 +33,6 @@
int (*dmg_uncompress_bz2)(char *next_in, unsigned int avail_in,
char *next_out, unsigned int avail_out);
int (*dmg_uncompress_lzfse)(char *next_in, unsigned int avail_in,
char *next_out, unsigned int avail_out);
enum {
/* Limit chunk sizes to prevent unreasonable amounts of memory being used
* or truncating when converting to 32-bit types
@@ -44,19 +41,6 @@ enum {
DMG_SECTORCOUNTS_MAX = DMG_LENGTHS_MAX / 512,
};
enum {
/* DMG Block Type */
UDZE = 0, /* Zeroes */
UDRW, /* RAW type */
UDIG, /* Ignore */
UDCO = 0x80000004,
UDZO,
UDBZ,
ULFO,
UDCM = 0x7ffffffe, /* Comments */
UDLE = 0xffffffff /* Last Entry */
};
static int dmg_probe(const uint8_t *buf, int buf_size, const char *filename)
{
int len;
@@ -121,17 +105,15 @@ static void update_max_chunk_size(BDRVDMGState *s, uint32_t chunk,
uint32_t uncompressed_sectors = 0;
switch (s->types[chunk]) {
case UDZO: /* zlib compressed */
case UDBZ: /* bzip2 compressed */
case ULFO: /* lzfse compressed */
case 0x80000005: /* zlib compressed */
case 0x80000006: /* bzip2 compressed */
compressed_size = s->lengths[chunk];
uncompressed_sectors = s->sectorcounts[chunk];
break;
case UDRW: /* copy */
case 1: /* copy */
uncompressed_sectors = DIV_ROUND_UP(s->lengths[chunk], 512);
break;
case UDZE: /* zero */
case UDIG: /* ignore */
case 2: /* zero */
/* as the all-zeroes block may be large, it is treated specially: the
* sector is not copied from a large buffer, a simple memset is used
* instead. Therefore uncompressed_sectors does not need to be set. */
@@ -200,15 +182,12 @@ typedef struct DmgHeaderState {
static bool dmg_is_known_block_type(uint32_t entry_type)
{
switch (entry_type) {
case UDZE: /* zeros */
case UDRW: /* uncompressed */
case UDIG: /* ignore */
case UDZO: /* zlib */
case 0x00000001: /* uncompressed */
case 0x00000002: /* zeroes */
case 0x80000005: /* zlib */
return true;
case UDBZ: /* bzip2 */
case 0x80000006: /* bzip2 */
return !!dmg_uncompress_bz2;
case ULFO: /* lzfse */
return !!dmg_uncompress_lzfse;
default:
return false;
}
@@ -267,10 +246,9 @@ static int dmg_read_mish_block(BDRVDMGState *s, DmgHeaderState *ds,
/* sector count */
s->sectorcounts[i] = buff_read_uint64(buffer, offset + 0x10);
/* all-zeroes sector (type UDZE and UDIG) does not need to be
* "uncompressed" and can therefore be unbounded. */
if (s->types[i] != UDZE && s->types[i] != UDIG
&& s->sectorcounts[i] > DMG_SECTORCOUNTS_MAX) {
/* all-zeroes sector (type 2) does not need to be "uncompressed" and can
* therefore be unbounded. */
if (s->types[i] != 2 && s->sectorcounts[i] > DMG_SECTORCOUNTS_MAX) {
error_report("sector count %" PRIu64 " for chunk %" PRIu32
" is larger than max (%u)",
s->sectorcounts[i], i, DMG_SECTORCOUNTS_MAX);
@@ -435,19 +413,24 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
int64_t offset;
int ret;
ret = bdrv_apply_auto_read_only(bs, NULL, errp);
if (ret < 0) {
return ret;
}
bs->file = bdrv_open_child(NULL, options, "file", bs, &child_file,
false, errp);
if (!bs->file) {
return -EINVAL;
}
if (!bdrv_is_read_only(bs)) {
error_report("Opening dmg images without an explicit read-only=on "
"option is deprecated. Future versions will refuse to "
"open the image instead of automatically marking the "
"image read-only.");
ret = bdrv_set_read_only(bs, true, errp);
if (ret < 0) {
return ret;
}
}
block_module_load_one("dmg-bz2");
block_module_load_one("dmg-lzfse");
s->n_chunks = 0;
s->offsets = s->lengths = s->sectors = s->sectorcounts = NULL;
@@ -575,20 +558,16 @@ static inline uint32_t search_chunk(BDRVDMGState *s, uint64_t sector_num)
{
/* binary search */
uint32_t chunk1 = 0, chunk2 = s->n_chunks, chunk3;
while (chunk1 <= chunk2) {
while (chunk1 != chunk2) {
chunk3 = (chunk1 + chunk2) / 2;
if (s->sectors[chunk3] > sector_num) {
if (chunk3 == 0) {
goto err;
}
chunk2 = chunk3 - 1;
chunk2 = chunk3;
} else if (s->sectors[chunk3] + s->sectorcounts[chunk3] > sector_num) {
return chunk3;
} else {
chunk1 = chunk3 + 1;
chunk1 = chunk3;
}
}
err:
return s->n_chunks; /* error */
}
@@ -606,7 +585,7 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
s->current_chunk = s->n_chunks;
switch (s->types[chunk]) { /* block entry type */
case UDZO: { /* zlib compressed */
case 0x80000005: { /* zlib compressed */
/* we need to buffer, because only the chunk as whole can be
* inflated. */
ret = bdrv_pread(bs->file, s->offsets[chunk],
@@ -629,7 +608,7 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
return -1;
}
break; }
case UDBZ: /* bzip2 compressed */
case 0x80000006: /* bzip2 compressed */
if (!dmg_uncompress_bz2) {
break;
}
@@ -650,36 +629,14 @@ static inline int dmg_read_chunk(BlockDriverState *bs, uint64_t sector_num)
return ret;
}
break;
case ULFO:
if (!dmg_uncompress_lzfse) {
break;
}
/* we need to buffer, because only the chunk as whole can be
* inflated. */
ret = bdrv_pread(bs->file, s->offsets[chunk],
s->compressed_chunk, s->lengths[chunk]);
if (ret != s->lengths[chunk]) {
return -1;
}
ret = dmg_uncompress_lzfse((char *)s->compressed_chunk,
(unsigned int) s->lengths[chunk],
(char *)s->uncompressed_chunk,
(unsigned int)
(512 * s->sectorcounts[chunk]));
if (ret < 0) {
return ret;
}
break;
case UDRW: /* copy */
case 1: /* copy */
ret = bdrv_pread(bs->file, s->offsets[chunk],
s->uncompressed_chunk, s->lengths[chunk]);
if (ret != s->lengths[chunk]) {
return -1;
}
break;
case UDZE: /* zeros */
case UDIG: /* ignore */
case 2: /* zero */
/* see dmg_read, it is treated specially. No buffer needs to be
* pre-filled, the zeroes can be set directly. */
break;
@@ -714,8 +671,7 @@ dmg_co_preadv(BlockDriverState *bs, uint64_t offset, uint64_t bytes,
/* Special case: current chunk is all zeroes. Do not perform a memcpy as
* s->uncompressed_chunk may be too small to cover the large all-zeroes
* section. dmg_read_chunk is called to find s->current_chunk */
if (s->types[s->current_chunk] == UDZE
|| s->types[s->current_chunk] == UDIG) { /* all zeroes block entry */
if (s->types[s->current_chunk] == 2) { /* all zeroes block entry */
qemu_iovec_memset(qiov, i * 512, 0, 512);
continue;
}

View File

@@ -55,7 +55,4 @@ typedef struct BDRVDMGState {
extern int (*dmg_uncompress_bz2)(char *next_in, unsigned int avail_in,
char *next_out, unsigned int avail_out);
extern int (*dmg_uncompress_lzfse)(char *next_in, unsigned int avail_in,
char *next_out, unsigned int avail_out);
#endif

File diff suppressed because it is too large Load Diff

View File

@@ -162,7 +162,7 @@ static BlockAIOCB *paio_submit(BlockDriverState *bs, HANDLE hfile,
acb->aio_nbytes = count;
acb->aio_offset = offset;
trace_file_paio_submit(acb, opaque, offset, count, type);
trace_paio_submit(acb, opaque, offset, count, type);
pool = aio_get_thread_pool(bdrv_get_aio_context(bs));
return thread_pool_submit_aio(pool, aio_worker, acb, cb, opaque);
}
@@ -176,7 +176,7 @@ int qemu_ftruncate64(int fd, int64_t length)
BOOL res;
if ((GetVersion() & 0x80000000UL) && (length >> 32) != 0)
return -1;
return -1;
h = (HANDLE)_get_osfhandle(fd);
@@ -184,13 +184,13 @@ int qemu_ftruncate64(int fd, int64_t length)
li.HighPart = 0;
li.LowPart = SetFilePointer (h, 0, &li.HighPart, FILE_CURRENT);
if (li.LowPart == INVALID_SET_FILE_POINTER && GetLastError() != NO_ERROR) {
return -1;
return -1;
}
high = length >> 32;
dw = SetFilePointer(h, (DWORD) length, &high, FILE_BEGIN);
if (dw == INVALID_SET_FILE_POINTER && GetLastError() != NO_ERROR) {
return -1;
return -1;
}
res = SetEndOfFile(h);
@@ -203,7 +203,7 @@ static int set_sparse(int fd)
{
DWORD returned;
return (int) DeviceIoControl((HANDLE)_get_osfhandle(fd), FSCTL_SET_SPARSE,
NULL, 0, NULL, 0, &returned, NULL);
NULL, 0, NULL, 0, &returned, NULL);
}
static void raw_detach_aio_context(BlockDriverState *bs)
@@ -251,11 +251,7 @@ static void raw_probe_alignment(BlockDriverState *bs, Error **errp)
&dg.Geometry.BytesPerSector,
&freeClusters, &totalClusters);
bs->bl.request_alignment = dg.Geometry.BytesPerSector;
return;
}
/* XXX Does Windows support AIO on less than 512-byte alignment? */
bs->bl.request_alignment = 512;
}
static void raw_parse_flags(int flags, bool use_aio, int *access_flags,
@@ -414,32 +410,32 @@ fail:
return ret;
}
static BlockAIOCB *raw_aio_preadv(BlockDriverState *bs,
uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags,
BlockCompletionFunc *cb, void *opaque)
static BlockAIOCB *raw_aio_readv(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
if (s->aio) {
return win32_aio_submit(bs, s->aio, s->hfile, offset, bytes, qiov,
cb, opaque, QEMU_AIO_READ);
return win32_aio_submit(bs, s->aio, s->hfile, sector_num, qiov,
nb_sectors, cb, opaque, QEMU_AIO_READ);
} else {
return paio_submit(bs, s->hfile, offset, qiov, bytes,
return paio_submit(bs, s->hfile, sector_num << BDRV_SECTOR_BITS, qiov,
nb_sectors << BDRV_SECTOR_BITS,
cb, opaque, QEMU_AIO_READ);
}
}
static BlockAIOCB *raw_aio_pwritev(BlockDriverState *bs,
uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags,
BlockCompletionFunc *cb, void *opaque)
static BlockAIOCB *raw_aio_writev(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
if (s->aio) {
return win32_aio_submit(bs, s->aio, s->hfile, offset, bytes, qiov,
cb, opaque, QEMU_AIO_WRITE);
return win32_aio_submit(bs, s->aio, s->hfile, sector_num, qiov,
nb_sectors, cb, opaque, QEMU_AIO_WRITE);
} else {
return paio_submit(bs, s->hfile, offset, qiov, bytes,
return paio_submit(bs, s->hfile, sector_num << BDRV_SECTOR_BITS, qiov,
nb_sectors << BDRV_SECTOR_BITS,
cb, opaque, QEMU_AIO_WRITE);
}
}
@@ -467,8 +463,8 @@ static void raw_close(BlockDriverState *bs)
}
}
static int coroutine_fn raw_co_truncate(BlockDriverState *bs, int64_t offset,
PreallocMode prealloc, Error **errp)
static int raw_truncate(BlockDriverState *bs, int64_t offset,
PreallocMode prealloc, Error **errp)
{
BDRVRawState *s = bs->opaque;
LONG low, high;
@@ -636,11 +632,11 @@ BlockDriver bdrv_file = {
.bdrv_co_create_opts = raw_co_create_opts,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
.bdrv_aio_preadv = raw_aio_preadv,
.bdrv_aio_pwritev = raw_aio_pwritev,
.bdrv_aio_readv = raw_aio_readv,
.bdrv_aio_writev = raw_aio_writev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_co_truncate = raw_co_truncate,
.bdrv_truncate = raw_truncate,
.bdrv_getlength = raw_getlength,
.bdrv_get_allocated_file_size
= raw_get_allocated_file_size,
@@ -712,12 +708,6 @@ static void hdev_parse_filename(const char *filename, QDict *options,
bdrv_parse_filename_strip_prefix(filename, "host_device:", options);
}
static void hdev_refresh_limits(BlockDriverState *bs, Error **errp)
{
/* XXX Does Windows support AIO on less than 512-byte alignment? */
bs->bl.request_alignment = 512;
}
static int hdev_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
@@ -803,10 +793,9 @@ static BlockDriver bdrv_host_device = {
.bdrv_probe_device = hdev_probe_device,
.bdrv_file_open = hdev_open,
.bdrv_close = raw_close,
.bdrv_refresh_limits = hdev_refresh_limits,
.bdrv_aio_preadv = raw_aio_preadv,
.bdrv_aio_pwritev = raw_aio_pwritev,
.bdrv_aio_readv = raw_aio_readv,
.bdrv_aio_writev = raw_aio_writev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_detach_aio_context = raw_detach_aio_context,

View File

@@ -9,10 +9,8 @@
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
#include <glusterfs/api/glfs.h>
#include "block/block_int.h"
#include "block/qdict.h"
#include "qapi/error.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qerror.h"
@@ -21,10 +19,6 @@
#include "qemu/option.h"
#include "qemu/cutils.h"
#ifdef CONFIG_GLUSTERFS_FTRUNCATE_HAS_STAT
# define glfs_ftruncate(fd, offset) glfs_ftruncate(fd, offset, NULL, NULL)
#endif
#define GLUSTER_OPT_FILENAME "filename"
#define GLUSTER_OPT_VOLUME "volume"
#define GLUSTER_OPT_PATH "path"
@@ -42,12 +36,6 @@
#define GLUSTER_DEBUG_MAX 9
#define GLUSTER_OPT_LOGFILE "logfile"
#define GLUSTER_LOGFILE_DEFAULT "-" /* handled in libgfapi as /dev/stderr */
/*
* Several versions of GlusterFS (3.12? -> 6.0.1) fail when the transfer size
* is greater or equal to 1024 MiB, so we are limiting the transfer size to 512
* MiB to avoid this rare issue.
*/
#define GLUSTER_MAX_TRANSFER (512 * MiB)
#define GERR_INDEX_HINT "hint: check in 'server' array index '%d'\n"
@@ -83,7 +71,7 @@ typedef struct ListElement {
GlfsPreopened saved;
} ListElement;
static QLIST_HEAD(, ListElement) glfs_list;
static QLIST_HEAD(glfs_list, ListElement) glfs_list;
static QemuOptsList qemu_gluster_create_opts = {
.name = "qemu-gluster-create-opts",
@@ -662,7 +650,7 @@ static int qemu_gluster_parse_json(BlockdevOptionsGluster *gconf,
}
gsconf = NULL;
qobject_unref(backing_options);
QDECREF(backing_options);
backing_options = NULL;
g_free(str);
str = NULL;
@@ -675,7 +663,7 @@ out:
qapi_free_SocketAddress(gsconf);
qemu_opts_del(opts);
g_free(str);
qobject_unref(backing_options);
QDECREF(backing_options);
errno = EINVAL;
return -errno;
}
@@ -736,11 +724,7 @@ static struct glfs *qemu_gluster_init(BlockdevOptionsGluster *gconf,
/*
* AIO callback routine called from GlusterFS thread.
*/
static void gluster_finish_aiocb(struct glfs_fd *fd, ssize_t ret,
#ifdef CONFIG_GLUSTERFS_IOCB_HAS_STAT
struct glfs_stat *pre, struct glfs_stat *post,
#endif
void *arg)
static void gluster_finish_aiocb(struct glfs_fd *fd, ssize_t ret, void *arg)
{
GlusterAIOCB *acb = (GlusterAIOCB *)arg;
@@ -864,16 +848,8 @@ static int qemu_gluster_open(BlockDriverState *bs, QDict *options,
qemu_gluster_parse_flags(bdrv_flags, &open_flags);
s->fd = glfs_open(s->glfs, gconf->path, open_flags);
ret = s->fd ? 0 : -errno;
if (ret == -EACCES || ret == -EROFS) {
/* Try to degrade to read-only, but if it doesn't work, still use the
* normal error message. */
if (bdrv_apply_auto_read_only(bs, NULL, NULL) == 0) {
open_flags = (open_flags & ~O_RDWR) | O_RDONLY;
s->fd = glfs_open(s->glfs, gconf->path, open_flags);
ret = s->fd ? 0 : -errno;
}
if (!s->fd) {
ret = -errno;
}
s->supports_seek_data = qemu_gluster_test_seek(s->fd);
@@ -894,11 +870,6 @@ out:
return ret;
}
static void qemu_gluster_refresh_limits(BlockDriverState *bs, Error **errp)
{
bs->bl.max_transfer = GLUSTER_MAX_TRANSFER;
}
static int qemu_gluster_reopen_prepare(BDRVReopenState *state,
BlockReopenQueue *queue, Error **errp)
{
@@ -1205,10 +1176,8 @@ static coroutine_fn int qemu_gluster_co_rw(BlockDriverState *bs,
return acb.ret;
}
static coroutine_fn int qemu_gluster_co_truncate(BlockDriverState *bs,
int64_t offset,
PreallocMode prealloc,
Error **errp)
static int qemu_gluster_truncate(BlockDriverState *bs, int64_t offset,
PreallocMode prealloc, Error **errp)
{
BDRVGlusterState *s = bs->opaque;
return qemu_gluster_do_truncate(s->fd, offset, prealloc, errp);
@@ -1225,10 +1194,8 @@ static coroutine_fn int qemu_gluster_co_readv(BlockDriverState *bs,
static coroutine_fn int qemu_gluster_co_writev(BlockDriverState *bs,
int64_t sector_num,
int nb_sectors,
QEMUIOVector *qiov,
int flags)
QEMUIOVector *qiov)
{
assert(!flags);
return qemu_gluster_co_rw(bs, sector_num, nb_sectors, qiov, 1);
}
@@ -1354,7 +1321,7 @@ static int qemu_gluster_has_zero_init(BlockDriverState *bs)
* If @start is in a trailing hole or beyond EOF, return -ENXIO.
* If we can't find out, return a negative errno other than -ENXIO.
*
* (Shamefully copied from file-posix.c, only minuscule adaptions.)
* (Shamefully copied from file-posix.c, only miniscule adaptions.)
*/
static int find_allocation(BlockDriverState *bs, off_t start,
off_t *data, off_t *hole)
@@ -1515,21 +1482,6 @@ static int coroutine_fn qemu_gluster_co_block_status(BlockDriverState *bs,
}
static const char *const gluster_strong_open_opts[] = {
GLUSTER_OPT_VOLUME,
GLUSTER_OPT_PATH,
GLUSTER_OPT_TYPE,
GLUSTER_OPT_SERVER_PATTERN,
GLUSTER_OPT_HOST,
GLUSTER_OPT_PORT,
GLUSTER_OPT_TO,
GLUSTER_OPT_IPV4,
GLUSTER_OPT_IPV6,
GLUSTER_OPT_SOCKET,
NULL
};
static BlockDriver bdrv_gluster = {
.format_name = "gluster",
.protocol_name = "gluster",
@@ -1544,7 +1496,7 @@ static BlockDriver bdrv_gluster = {
.bdrv_co_create_opts = qemu_gluster_co_create_opts,
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_co_truncate = qemu_gluster_co_truncate,
.bdrv_truncate = qemu_gluster_truncate,
.bdrv_co_readv = qemu_gluster_co_readv,
.bdrv_co_writev = qemu_gluster_co_writev,
.bdrv_co_flush_to_disk = qemu_gluster_co_flush_to_disk,
@@ -1556,9 +1508,7 @@ static BlockDriver bdrv_gluster = {
.bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
.bdrv_co_block_status = qemu_gluster_co_block_status,
.bdrv_refresh_limits = qemu_gluster_refresh_limits,
.create_opts = &qemu_gluster_create_opts,
.strong_runtime_opts = gluster_strong_open_opts,
};
static BlockDriver bdrv_gluster_tcp = {
@@ -1575,7 +1525,7 @@ static BlockDriver bdrv_gluster_tcp = {
.bdrv_co_create_opts = qemu_gluster_co_create_opts,
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_co_truncate = qemu_gluster_co_truncate,
.bdrv_truncate = qemu_gluster_truncate,
.bdrv_co_readv = qemu_gluster_co_readv,
.bdrv_co_writev = qemu_gluster_co_writev,
.bdrv_co_flush_to_disk = qemu_gluster_co_flush_to_disk,
@@ -1587,9 +1537,7 @@ static BlockDriver bdrv_gluster_tcp = {
.bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
.bdrv_co_block_status = qemu_gluster_co_block_status,
.bdrv_refresh_limits = qemu_gluster_refresh_limits,
.create_opts = &qemu_gluster_create_opts,
.strong_runtime_opts = gluster_strong_open_opts,
};
static BlockDriver bdrv_gluster_unix = {
@@ -1606,7 +1554,7 @@ static BlockDriver bdrv_gluster_unix = {
.bdrv_co_create_opts = qemu_gluster_co_create_opts,
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_co_truncate = qemu_gluster_co_truncate,
.bdrv_truncate = qemu_gluster_truncate,
.bdrv_co_readv = qemu_gluster_co_readv,
.bdrv_co_writev = qemu_gluster_co_writev,
.bdrv_co_flush_to_disk = qemu_gluster_co_flush_to_disk,
@@ -1618,9 +1566,7 @@ static BlockDriver bdrv_gluster_unix = {
.bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
.bdrv_co_block_status = qemu_gluster_co_block_status,
.bdrv_refresh_limits = qemu_gluster_refresh_limits,
.create_opts = &qemu_gluster_create_opts,
.strong_runtime_opts = gluster_strong_open_opts,
};
/* rdma is deprecated (actually never supported for volfile fetch).
@@ -1643,7 +1589,7 @@ static BlockDriver bdrv_gluster_rdma = {
.bdrv_co_create_opts = qemu_gluster_co_create_opts,
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_co_truncate = qemu_gluster_co_truncate,
.bdrv_truncate = qemu_gluster_truncate,
.bdrv_co_readv = qemu_gluster_co_readv,
.bdrv_co_writev = qemu_gluster_co_writev,
.bdrv_co_flush_to_disk = qemu_gluster_co_flush_to_disk,
@@ -1655,9 +1601,7 @@ static BlockDriver bdrv_gluster_rdma = {
.bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes,
#endif
.bdrv_co_block_status = qemu_gluster_co_block_status,
.bdrv_refresh_limits = qemu_gluster_refresh_limits,
.create_opts = &qemu_gluster_create_opts,
.strong_runtime_opts = gluster_strong_open_opts,
};
static void bdrv_gluster_init(void)

1003
block/io.c

File diff suppressed because it is too large Load Diff

View File

@@ -33,7 +33,6 @@
#include "qemu/bitops.h"
#include "qemu/bitmap.h"
#include "block/block_int.h"
#include "block/qdict.h"
#include "scsi/constants.h"
#include "qemu/iov.h"
#include "qemu/option.h"
@@ -44,14 +43,11 @@
#include "qapi/qmp/qstring.h"
#include "crypto/secret.h"
#include "scsi/utils.h"
#include "trace.h"
/* Conflict between scsi/utils.h and libiscsi! :( */
#define SCSI_XFER_NONE ISCSI_XFER_NONE
#include <iscsi/iscsi.h>
#define inline __attribute__((gnu_inline)) /* required for libiscsi v1.9.0 */
#include <iscsi/scsi-lowlevel.h>
#undef inline
#undef SCSI_XFER_NONE
QEMU_BUILD_BUG_ON((int)SCSI_XFER_NONE != (int)ISCSI_XFER_NONE);
@@ -72,7 +68,6 @@ typedef struct IscsiLun {
QemuMutex mutex;
struct scsi_inquiry_logical_block_provisioning lbp;
struct scsi_inquiry_block_limits bl;
struct scsi_inquiry_device_designator *dd;
unsigned char *zeroblock;
/* The allocmap tracks which clusters (pages) on the iSCSI target are
* allocated and which are not. In case a target returns zeros for
@@ -119,6 +114,7 @@ typedef struct IscsiAIOCB {
QEMUBH *bh;
IscsiLun *iscsilun;
struct scsi_task *task;
uint8_t *buf;
int status;
int64_t sector_num;
int nb_sectors;
@@ -126,7 +122,6 @@ typedef struct IscsiAIOCB {
#ifdef __linux__
sg_io_hdr_t *ioh;
#endif
bool cancelled;
} IscsiAIOCB;
/* libiscsi uses time_t so its enough to process events every second */
@@ -145,8 +140,6 @@ static const unsigned iscsi_retry_times[] = {8, 32, 128, 512, 2048, 8192, 32768}
* unallocated. */
#define ISCSI_CHECKALLOC_THRES 64
#ifdef __linux__
static void
iscsi_bh_cb(void *p)
{
@@ -154,6 +147,9 @@ iscsi_bh_cb(void *p)
qemu_bh_delete(acb->bh);
g_free(acb->buf);
acb->buf = NULL;
acb->common.cb(acb->common.opaque, acb->status);
if (acb->task != NULL) {
@@ -174,8 +170,6 @@ iscsi_schedule_bh(IscsiAIOCB *acb)
qemu_bh_schedule(acb->bh);
}
#endif
static void iscsi_co_generic_bh_cb(void *opaque)
{
struct IscsiTask *iTask = opaque;
@@ -294,22 +288,14 @@ static void iscsi_co_init_iscsitask(IscsiLun *iscsilun, struct IscsiTask *iTask)
};
}
#ifdef __linux__
/* Called (via iscsi_service) with QemuMutex held. */
static void
iscsi_abort_task_cb(struct iscsi_context *iscsi, int status, void *command_data,
void *private_data)
{
IscsiAIOCB *acb = private_data;
/* If the command callback hasn't been called yet, drop the task */
if (!acb->bh) {
/* Call iscsi_aio_ioctl_cb() with SCSI_STATUS_CANCELLED */
iscsi_scsi_cancel_task(iscsi, acb->task);
}
qemu_aio_unref(acb); /* acquired in iscsi_aio_cancel() */
acb->status = -ECANCELED;
iscsi_schedule_bh(acb);
}
static void
@@ -318,25 +304,14 @@ iscsi_aio_cancel(BlockAIOCB *blockacb)
IscsiAIOCB *acb = (IscsiAIOCB *)blockacb;
IscsiLun *iscsilun = acb->iscsilun;
qemu_mutex_lock(&iscsilun->mutex);
/* If it was cancelled or completed already, our work is done here */
if (acb->cancelled || acb->status != -EINPROGRESS) {
qemu_mutex_unlock(&iscsilun->mutex);
if (acb->status != -EINPROGRESS) {
return;
}
acb->cancelled = true;
qemu_aio_ref(acb); /* released in iscsi_abort_task_cb() */
/* send a task mgmt call to the target to cancel the task on the target */
if (iscsi_task_mgmt_abort_task_async(iscsilun->iscsi, acb->task,
iscsi_abort_task_cb, acb) < 0) {
qemu_aio_unref(acb); /* since iscsi_abort_task_cb() won't be called */
}
iscsi_task_mgmt_abort_task_async(iscsilun->iscsi, acb->task,
iscsi_abort_task_cb, acb);
qemu_mutex_unlock(&iscsilun->mutex);
}
static const AIOCBInfo iscsi_aiocb_info = {
@@ -344,7 +319,6 @@ static const AIOCBInfo iscsi_aiocb_info = {
.cancel_async = iscsi_aio_cancel,
};
#endif
static void iscsi_process_read(void *arg);
static void iscsi_process_write(void *arg);
@@ -371,8 +345,6 @@ static void iscsi_timed_check_events(void *opaque)
{
IscsiLun *iscsilun = opaque;
qemu_mutex_lock(&iscsilun->mutex);
/* check for timed out requests */
iscsi_service(iscsilun->iscsi, 0);
@@ -385,8 +357,6 @@ static void iscsi_timed_check_events(void *opaque)
* to return to service once this situation changes. */
iscsi_set_events(iscsilun);
qemu_mutex_unlock(&iscsilun->mutex);
timer_mod(iscsilun->event_timer,
qemu_clock_get_ms(QEMU_CLOCK_REALTIME) + EVENT_INTERVAL);
}
@@ -585,20 +555,9 @@ static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
offset / iscsilun->cluster_size) == size);
}
static void coroutine_fn iscsi_co_wait_for_task(IscsiTask *iTask,
IscsiLun *iscsilun)
{
while (!iTask->complete) {
iscsi_set_events(iscsilun);
qemu_mutex_unlock(&iscsilun->mutex);
qemu_coroutine_yield();
qemu_mutex_lock(&iscsilun->mutex);
}
}
static int coroutine_fn
iscsi_co_writev(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
QEMUIOVector *iov, int flags)
iscsi_co_writev_flags(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
QEMUIOVector *iov, int flags)
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
@@ -657,7 +616,12 @@ retry:
scsi_task_set_iov_out(iTask.task, (struct scsi_iovec *) iov->iov,
iov->niov);
#endif
iscsi_co_wait_for_task(&iTask, iscsilun);
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_mutex_unlock(&iscsilun->mutex);
qemu_coroutine_yield();
qemu_mutex_lock(&iscsilun->mutex);
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
@@ -728,7 +692,13 @@ retry:
ret = -ENOMEM;
goto out_unlock;
}
iscsi_co_wait_for_task(&iTask, iscsilun);
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_mutex_unlock(&iscsilun->mutex);
qemu_coroutine_yield();
qemu_mutex_lock(&iscsilun->mutex);
}
if (iTask.do_retry) {
if (iTask.task != NULL) {
@@ -892,8 +862,13 @@ retry:
#if LIBISCSI_API_VERSION < (20160603)
scsi_task_set_iov_in(iTask.task, (struct scsi_iovec *) iov->iov, iov->niov);
#endif
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_mutex_unlock(&iscsilun->mutex);
qemu_coroutine_yield();
qemu_mutex_lock(&iscsilun->mutex);
}
iscsi_co_wait_for_task(&iTask, iscsilun);
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
@@ -930,7 +905,12 @@ retry:
return -ENOMEM;
}
iscsi_co_wait_for_task(&iTask, iscsilun);
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_mutex_unlock(&iscsilun->mutex);
qemu_coroutine_yield();
qemu_mutex_lock(&iscsilun->mutex);
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
@@ -960,13 +940,8 @@ iscsi_aio_ioctl_cb(struct iscsi_context *iscsi, int status,
{
IscsiAIOCB *acb = opaque;
if (status == SCSI_STATUS_CANCELLED) {
if (!acb->bh) {
acb->status = -ECANCELED;
iscsi_schedule_bh(acb);
}
return;
}
g_free(acb->buf);
acb->buf = NULL;
acb->status = 0;
if (status < 0) {
@@ -1042,8 +1017,8 @@ static BlockAIOCB *iscsi_aio_ioctl(BlockDriverState *bs,
acb->iscsilun = iscsilun;
acb->bh = NULL;
acb->status = -EINPROGRESS;
acb->buf = NULL;
acb->ioh = buf;
acb->cancelled = false;
if (req != SG_IO) {
iscsi_ioctl_handle_emulated(acb, req, buf);
@@ -1167,7 +1142,12 @@ retry:
goto out_unlock;
}
iscsi_co_wait_for_task(&iTask, iscsilun);
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_mutex_unlock(&iscsilun->mutex);
qemu_coroutine_yield();
qemu_mutex_lock(&iscsilun->mutex);
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
@@ -1263,7 +1243,12 @@ retry:
return -ENOMEM;
}
iscsi_co_wait_for_task(&iTask, iscsilun);
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_mutex_unlock(&iscsilun->mutex);
qemu_coroutine_yield();
qemu_mutex_lock(&iscsilun->mutex);
}
if (iTask.status == SCSI_STATUS_CHECK_CONDITION &&
iTask.task->sense.key == SCSI_SENSE_ILLEGAL_REQUEST &&
@@ -1747,34 +1732,14 @@ static QemuOptsList runtime_opts = {
.name = "timeout",
.type = QEMU_OPT_NUMBER,
},
{
.name = "filename",
.type = QEMU_OPT_STRING,
},
{ /* end of list */ }
},
};
static void iscsi_save_designator(IscsiLun *lun,
struct scsi_inquiry_device_identification *inq_di)
{
struct scsi_inquiry_device_designator *desig, *copy = NULL;
for (desig = inq_di->designators; desig; desig = desig->next) {
if (desig->association ||
desig->designator_type > SCSI_DESIGNATOR_TYPE_NAA) {
continue;
}
/* NAA works better than T10 vendor ID based designator. */
if (!copy || copy->designator_type < desig->designator_type) {
copy = desig;
}
}
if (copy) {
lun->dd = g_new(struct scsi_inquiry_device_designator, 1);
*lun->dd = *copy;
lun->dd->next = NULL;
lun->dd->designator = g_malloc(copy->designator_length);
memcpy(lun->dd->designator, copy->designator, copy->designator_length);
}
}
static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
@@ -1786,12 +1751,27 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
char *initiator_name = NULL;
QemuOpts *opts;
Error *local_err = NULL;
const char *transport_name, *portal, *target;
const char *transport_name, *portal, *target, *filename;
#if LIBISCSI_API_VERSION >= (20160603)
enum iscsi_transport_type transport;
#endif
int i, ret = 0, timeout = 0, lun;
/* If we are given a filename, parse the filename, with precedence given to
* filename encoded options */
filename = qdict_get_try_str(options, "filename");
if (filename) {
warn_report("'filename' option specified. "
"This is an unsupported option, and may be deprecated "
"in the future");
iscsi_parse_filename(filename, options, &local_err);
if (local_err) {
ret = -EINVAL;
error_propagate(errp, local_err);
goto exit;
}
}
opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
qemu_opts_absorb_qdict(opts, options, &local_err);
if (local_err) {
@@ -1876,7 +1856,7 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
iscsi_set_timeout(iscsi, timeout);
#else
if (timeout) {
warn_report("iSCSI: ignoring timeout value for libiscsi <1.15.0");
error_report("iSCSI: ignoring timeout value for libiscsi <1.15.0");
}
#endif
@@ -1910,11 +1890,9 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
/* Check the write protect flag of the LUN if we want to write */
if (iscsilun->type == TYPE_DISK && (flags & BDRV_O_RDWR) &&
iscsilun->write_protected) {
ret = bdrv_apply_auto_read_only(bs, "LUN is write protected", errp);
if (ret < 0) {
goto out;
}
flags &= ~BDRV_O_RDWR;
error_setg(errp, "Cannot open a write protected LUN as read-write");
ret = -EACCES;
goto out;
}
iscsi_readcapacity_sync(iscsilun, &local_err);
@@ -1944,7 +1922,6 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
struct scsi_task *inq_task;
struct scsi_inquiry_logical_block_provisioning *inq_lbp;
struct scsi_inquiry_block_limits *inq_bl;
struct scsi_inquiry_device_identification *inq_di;
switch (inq_vpd->pages[i]) {
case SCSI_INQUIRY_PAGECODE_LOGICAL_BLOCK_PROVISIONING:
inq_task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1,
@@ -1970,17 +1947,6 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
sizeof(struct scsi_inquiry_block_limits));
scsi_free_scsi_task(inq_task);
break;
case SCSI_INQUIRY_PAGECODE_DEVICE_IDENTIFICATION:
inq_task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1,
SCSI_INQUIRY_PAGECODE_DEVICE_IDENTIFICATION,
(void **) &inq_di, errp);
if (inq_task == NULL) {
ret = -EINVAL;
goto out;
}
iscsi_save_designator(iscsilun, inq_di);
scsi_free_scsi_task(inq_task);
break;
default:
break;
}
@@ -2023,7 +1989,7 @@ out:
}
memset(iscsilun, 0, sizeof(IscsiLun));
}
exit:
return ret;
}
@@ -2037,10 +2003,6 @@ static void iscsi_close(BlockDriverState *bs)
iscsi_logout_sync(iscsi);
}
iscsi_destroy_context(iscsi);
if (iscsilun->dd) {
g_free(iscsilun->dd->designator);
g_free(iscsilun->dd);
}
g_free(iscsilun->zeroblock);
iscsi_allocmap_free(iscsilun);
qemu_mutex_destroy(&iscsilun->mutex);
@@ -2120,8 +2082,8 @@ static void iscsi_reopen_commit(BDRVReopenState *reopen_state)
}
}
static int coroutine_fn iscsi_co_truncate(BlockDriverState *bs, int64_t offset,
PreallocMode prealloc, Error **errp)
static int iscsi_truncate(BlockDriverState *bs, int64_t offset,
PreallocMode prealloc, Error **errp)
{
IscsiLun *iscsilun = bs->opaque;
Error *local_err = NULL;
@@ -2181,7 +2143,7 @@ static int coroutine_fn iscsi_co_create_opts(const char *filename, QemuOpts *opt
} else {
ret = iscsi_open(bs, bs_options, 0, NULL);
}
qobject_unref(bs_options);
QDECREF(bs_options);
if (ret != 0) {
goto out;
@@ -2222,226 +2184,6 @@ static void coroutine_fn iscsi_co_invalidate_cache(BlockDriverState *bs,
iscsi_allocmap_invalidate(iscsilun);
}
static int coroutine_fn iscsi_co_copy_range_from(BlockDriverState *bs,
BdrvChild *src,
uint64_t src_offset,
BdrvChild *dst,
uint64_t dst_offset,
uint64_t bytes,
BdrvRequestFlags read_flags,
BdrvRequestFlags write_flags)
{
return bdrv_co_copy_range_to(src, src_offset, dst, dst_offset, bytes,
read_flags, write_flags);
}
static struct scsi_task *iscsi_xcopy_task(int param_len)
{
struct scsi_task *task;
task = g_new0(struct scsi_task, 1);
task->cdb[0] = EXTENDED_COPY;
task->cdb[10] = (param_len >> 24) & 0xFF;
task->cdb[11] = (param_len >> 16) & 0xFF;
task->cdb[12] = (param_len >> 8) & 0xFF;
task->cdb[13] = param_len & 0xFF;
task->cdb_size = 16;
task->xfer_dir = SCSI_XFER_WRITE;
task->expxferlen = param_len;
return task;
}
static void iscsi_populate_target_desc(unsigned char *desc, IscsiLun *lun)
{
struct scsi_inquiry_device_designator *dd = lun->dd;
memset(desc, 0, 32);
desc[0] = 0xE4; /* IDENT_DESCR_TGT_DESCR */
desc[4] = dd->code_set;
desc[5] = (dd->designator_type & 0xF)
| ((dd->association & 3) << 4);
desc[7] = dd->designator_length;
memcpy(desc + 8, dd->designator, MIN(dd->designator_length, 20));
desc[28] = 0;
desc[29] = (lun->block_size >> 16) & 0xFF;
desc[30] = (lun->block_size >> 8) & 0xFF;
desc[31] = lun->block_size & 0xFF;
}
static void iscsi_xcopy_desc_hdr(uint8_t *hdr, int dc, int cat, int src_index,
int dst_index)
{
hdr[0] = 0x02; /* BLK_TO_BLK_SEG_DESCR */
hdr[1] = ((dc << 1) | cat) & 0xFF;
hdr[2] = (XCOPY_BLK2BLK_SEG_DESC_SIZE >> 8) & 0xFF;
/* don't account for the first 4 bytes in descriptor header*/
hdr[3] = (XCOPY_BLK2BLK_SEG_DESC_SIZE - 4 /* SEG_DESC_SRC_INDEX_OFFSET */) & 0xFF;
hdr[4] = (src_index >> 8) & 0xFF;
hdr[5] = src_index & 0xFF;
hdr[6] = (dst_index >> 8) & 0xFF;
hdr[7] = dst_index & 0xFF;
}
static void iscsi_xcopy_populate_desc(uint8_t *desc, int dc, int cat,
int src_index, int dst_index, int num_blks,
uint64_t src_lba, uint64_t dst_lba)
{
iscsi_xcopy_desc_hdr(desc, dc, cat, src_index, dst_index);
/* The caller should verify the request size */
assert(num_blks < 65536);
desc[10] = (num_blks >> 8) & 0xFF;
desc[11] = num_blks & 0xFF;
desc[12] = (src_lba >> 56) & 0xFF;
desc[13] = (src_lba >> 48) & 0xFF;
desc[14] = (src_lba >> 40) & 0xFF;
desc[15] = (src_lba >> 32) & 0xFF;
desc[16] = (src_lba >> 24) & 0xFF;
desc[17] = (src_lba >> 16) & 0xFF;
desc[18] = (src_lba >> 8) & 0xFF;
desc[19] = src_lba & 0xFF;
desc[20] = (dst_lba >> 56) & 0xFF;
desc[21] = (dst_lba >> 48) & 0xFF;
desc[22] = (dst_lba >> 40) & 0xFF;
desc[23] = (dst_lba >> 32) & 0xFF;
desc[24] = (dst_lba >> 24) & 0xFF;
desc[25] = (dst_lba >> 16) & 0xFF;
desc[26] = (dst_lba >> 8) & 0xFF;
desc[27] = dst_lba & 0xFF;
}
static void iscsi_xcopy_populate_header(unsigned char *buf, int list_id, int str,
int list_id_usage, int prio,
int tgt_desc_len,
int seg_desc_len, int inline_data_len)
{
buf[0] = list_id;
buf[1] = ((str & 1) << 5) | ((list_id_usage & 3) << 3) | (prio & 7);
buf[2] = (tgt_desc_len >> 8) & 0xFF;
buf[3] = tgt_desc_len & 0xFF;
buf[8] = (seg_desc_len >> 24) & 0xFF;
buf[9] = (seg_desc_len >> 16) & 0xFF;
buf[10] = (seg_desc_len >> 8) & 0xFF;
buf[11] = seg_desc_len & 0xFF;
buf[12] = (inline_data_len >> 24) & 0xFF;
buf[13] = (inline_data_len >> 16) & 0xFF;
buf[14] = (inline_data_len >> 8) & 0xFF;
buf[15] = inline_data_len & 0xFF;
}
static void iscsi_xcopy_data(struct iscsi_data *data,
IscsiLun *src, int64_t src_lba,
IscsiLun *dst, int64_t dst_lba,
uint16_t num_blocks)
{
uint8_t *buf;
const int src_offset = XCOPY_DESC_OFFSET;
const int dst_offset = XCOPY_DESC_OFFSET + IDENT_DESCR_TGT_DESCR_SIZE;
const int seg_offset = dst_offset + IDENT_DESCR_TGT_DESCR_SIZE;
data->size = XCOPY_DESC_OFFSET +
IDENT_DESCR_TGT_DESCR_SIZE * 2 +
XCOPY_BLK2BLK_SEG_DESC_SIZE;
data->data = g_malloc0(data->size);
buf = data->data;
/* Initialise the parameter list header */
iscsi_xcopy_populate_header(buf, 1, 0, 2 /* LIST_ID_USAGE_DISCARD */,
0, 2 * IDENT_DESCR_TGT_DESCR_SIZE,
XCOPY_BLK2BLK_SEG_DESC_SIZE,
0);
/* Initialise CSCD list with one src + one dst descriptor */
iscsi_populate_target_desc(&buf[src_offset], src);
iscsi_populate_target_desc(&buf[dst_offset], dst);
/* Initialise one segment descriptor */
iscsi_xcopy_populate_desc(&buf[seg_offset], 0, 0, 0, 1, num_blocks,
src_lba, dst_lba);
}
static int coroutine_fn iscsi_co_copy_range_to(BlockDriverState *bs,
BdrvChild *src,
uint64_t src_offset,
BdrvChild *dst,
uint64_t dst_offset,
uint64_t bytes,
BdrvRequestFlags read_flags,
BdrvRequestFlags write_flags)
{
IscsiLun *dst_lun = dst->bs->opaque;
IscsiLun *src_lun;
struct IscsiTask iscsi_task;
struct iscsi_data data;
int r = 0;
int block_size;
if (src->bs->drv->bdrv_co_copy_range_to != iscsi_co_copy_range_to) {
return -ENOTSUP;
}
src_lun = src->bs->opaque;
if (!src_lun->dd || !dst_lun->dd) {
return -ENOTSUP;
}
if (!is_byte_request_lun_aligned(dst_offset, bytes, dst_lun)) {
return -ENOTSUP;
}
if (!is_byte_request_lun_aligned(src_offset, bytes, src_lun)) {
return -ENOTSUP;
}
if (dst_lun->block_size != src_lun->block_size ||
!dst_lun->block_size) {
return -ENOTSUP;
}
block_size = dst_lun->block_size;
if (bytes / block_size > 65535) {
return -ENOTSUP;
}
iscsi_xcopy_data(&data,
src_lun, src_offset / block_size,
dst_lun, dst_offset / block_size,
bytes / block_size);
iscsi_co_init_iscsitask(dst_lun, &iscsi_task);
qemu_mutex_lock(&dst_lun->mutex);
iscsi_task.task = iscsi_xcopy_task(data.size);
retry:
if (iscsi_scsi_command_async(dst_lun->iscsi, dst_lun->lun,
iscsi_task.task, iscsi_co_generic_cb,
&data,
&iscsi_task) != 0) {
r = -EIO;
goto out_unlock;
}
iscsi_co_wait_for_task(&iscsi_task, dst_lun);
if (iscsi_task.do_retry) {
iscsi_task.complete = 0;
goto retry;
}
if (iscsi_task.status != SCSI_STATUS_GOOD) {
r = iscsi_task.err_code;
goto out_unlock;
}
out_unlock:
trace_iscsi_xcopy(src_lun, src_offset, dst_lun, dst_offset, bytes, r);
g_free(iscsi_task.task);
qemu_mutex_unlock(&dst_lun->mutex);
g_free(iscsi_task.err_str);
return r;
}
static QemuOptsList iscsi_create_opts = {
.name = "iscsi-create-opts",
.head = QTAILQ_HEAD_INITIALIZER(iscsi_create_opts.head),
@@ -2455,20 +2197,6 @@ static QemuOptsList iscsi_create_opts = {
}
};
static const char *const iscsi_strong_runtime_opts[] = {
"transport",
"portal",
"target",
"user",
"password",
"password-secret",
"lun",
"initiator-name",
"header-digest",
NULL
};
static BlockDriver bdrv_iscsi = {
.format_name = "iscsi",
.protocol_name = "iscsi",
@@ -2485,16 +2213,14 @@ static BlockDriver bdrv_iscsi = {
.bdrv_getlength = iscsi_getlength,
.bdrv_get_info = iscsi_get_info,
.bdrv_co_truncate = iscsi_co_truncate,
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
.bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_copy_range_from = iscsi_co_copy_range_from,
.bdrv_co_copy_range_to = iscsi_co_copy_range_to,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
.bdrv_co_writev = iscsi_co_writev,
.bdrv_co_writev_flags = iscsi_co_writev_flags,
.bdrv_co_flush_to_disk = iscsi_co_flush,
#ifdef __linux__
@@ -2503,8 +2229,6 @@ static BlockDriver bdrv_iscsi = {
.bdrv_detach_aio_context = iscsi_detach_aio_context,
.bdrv_attach_aio_context = iscsi_attach_aio_context,
.strong_runtime_opts = iscsi_strong_runtime_opts,
};
#if LIBISCSI_API_VERSION >= (20160603)
@@ -2524,16 +2248,14 @@ static BlockDriver bdrv_iser = {
.bdrv_getlength = iscsi_getlength,
.bdrv_get_info = iscsi_get_info,
.bdrv_co_truncate = iscsi_co_truncate,
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
.bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_copy_range_from = iscsi_co_copy_range_from,
.bdrv_co_copy_range_to = iscsi_co_copy_range_to,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
.bdrv_co_writev = iscsi_co_writev,
.bdrv_co_writev_flags = iscsi_co_writev_flags,
.bdrv_co_flush_to_disk = iscsi_co_flush,
#ifdef __linux__
@@ -2542,8 +2264,6 @@ static BlockDriver bdrv_iser = {
.bdrv_detach_aio_context = iscsi_detach_aio_context,
.bdrv_attach_aio_context = iscsi_attach_aio_context,
.strong_runtime_opts = iscsi_strong_runtime_opts,
};
#endif

View File

@@ -15,7 +15,6 @@
#include "block/raw-aio.h"
#include "qemu/event_notifier.h"
#include "qemu/coroutine.h"
#include "qapi/error.h"
#include <libaio.h>
@@ -234,9 +233,9 @@ static void qemu_laio_process_completions(LinuxAioState *s)
static void qemu_laio_process_completions_and_submit(LinuxAioState *s)
{
aio_context_acquire(s->aio_context);
qemu_laio_process_completions(s);
aio_context_acquire(s->aio_context);
if (!s->io_q.plugged && !QSIMPLEQ_EMPTY(&s->io_q.pending)) {
ioq_submit(s);
}
@@ -384,10 +383,10 @@ static int laio_do_submit(int fd, struct qemu_laiocb *laiocb, off_t offset,
switch (type) {
case QEMU_AIO_WRITE:
io_prep_pwritev(iocbs, fd, qiov->iov, qiov->niov, offset);
break;
break;
case QEMU_AIO_READ:
io_prep_preadv(iocbs, fd, qiov->iov, qiov->niov, offset);
break;
break;
/* Currently Linux kernel does not support other operations */
default:
fprintf(stderr, "%s: invalid AIO request type 0x%x.\n",
@@ -471,21 +470,16 @@ void laio_attach_aio_context(LinuxAioState *s, AioContext *new_context)
qemu_laio_poll_cb);
}
LinuxAioState *laio_init(Error **errp)
LinuxAioState *laio_init(void)
{
int rc;
LinuxAioState *s;
s = g_malloc0(sizeof(*s));
rc = event_notifier_init(&s->e, false);
if (rc < 0) {
error_setg_errno(errp, -rc, "failed to to initialize event notifier");
if (event_notifier_init(&s->e, false) < 0) {
goto out_free_state;
}
rc = io_setup(MAX_EVENTS, &s->ctx);
if (rc < 0) {
error_setg_errno(errp, -rc, "failed to create linux AIO context");
if (io_setup(MAX_EVENTS, &s->ctx) != 0) {
goto out_close_efd;
}

File diff suppressed because it is too large Load Diff

View File

@@ -28,8 +28,6 @@
*/
#include "qemu/osdep.h"
#include "trace.h"
#include "qapi/error.h"
#include "nbd-client.h"
@@ -53,13 +51,15 @@ static void nbd_teardown_connection(BlockDriverState *bs)
{
NBDClientSession *client = nbd_get_client_session(bs);
assert(client->ioc);
if (!client->ioc) { /* Already closed */
return;
}
/* finish any pending coroutines */
qio_channel_shutdown(client->ioc,
QIO_CHANNEL_SHUTDOWN_BOTH,
NULL);
BDRV_POLL_WHILE(bs, client->connection_co);
BDRV_POLL_WHILE(bs, client->read_reply_co);
nbd_client_detach_aio_context(bs);
object_unref(OBJECT(client->sioc));
@@ -68,7 +68,7 @@ static void nbd_teardown_connection(BlockDriverState *bs)
client->ioc = NULL;
}
static coroutine_fn void nbd_connection_entry(void *opaque)
static coroutine_fn void nbd_read_reply_entry(void *opaque)
{
NBDClientSession *s = opaque;
uint64_t i;
@@ -76,21 +76,10 @@ static coroutine_fn void nbd_connection_entry(void *opaque)
Error *local_err = NULL;
while (!s->quit) {
/*
* The NBD client can only really be considered idle when it has
* yielded from qio_channel_readv_all_eof(), waiting for data. This is
* the point where the additional scheduled coroutine entry happens
* after nbd_client_attach_aio_context().
*
* Therefore we keep an additional in_flight reference all the time and
* only drop it temporarily here.
*/
assert(s->reply.handle == 0);
ret = nbd_receive_reply(s->bs, s->ioc, &s->reply, &local_err);
ret = nbd_receive_reply(s->ioc, &s->reply, &local_err);
if (local_err) {
trace_nbd_read_reply_entry_fail(ret, error_get_pretty(local_err));
error_free(local_err);
error_report_err(local_err);
}
if (ret <= 0) {
break;
@@ -110,14 +99,14 @@ static coroutine_fn void nbd_connection_entry(void *opaque)
}
/* We're woken up again by the request itself. Note that there
* is no race between yielding and reentering connection_co. This
* is no race between yielding and reentering read_reply_co. This
* is because:
*
* - if the request runs on the same AioContext, it is only
* entered after we yield
*
* - if the request runs on a different AioContext, reentering
* connection_co happens through a bottom half, which can only
* read_reply_co happens through a bottom half, which can only
* run after we yield.
*/
aio_co_wake(s->requests[i].coroutine);
@@ -126,10 +115,7 @@ static coroutine_fn void nbd_connection_entry(void *opaque)
s->quit = true;
nbd_recv_coroutines_wake_all(s);
bdrv_dec_in_flight(s->bs);
s->connection_co = NULL;
aio_wait_kick();
s->read_reply_co = NULL;
}
static int nbd_co_send_request(BlockDriverState *bs,
@@ -164,7 +150,10 @@ static int nbd_co_send_request(BlockDriverState *bs,
rc = -EIO;
goto err;
}
assert(s->ioc);
if (!s->ioc) {
rc = -EPIPE;
goto err;
}
if (qiov) {
qio_channel_set_cork(s->ioc, true);
@@ -211,8 +200,7 @@ static inline uint64_t payload_advance64(uint8_t **payload)
return ldq_be_p(*payload - 8);
}
static int nbd_parse_offset_hole_payload(NBDClientSession *client,
NBDStructuredReplyChunk *chunk,
static int nbd_parse_offset_hole_payload(NBDStructuredReplyChunk *chunk,
uint8_t *payload, uint64_t orig_offset,
QEMUIOVector *qiov, Error **errp)
{
@@ -234,10 +222,6 @@ static int nbd_parse_offset_hole_payload(NBDClientSession *client,
" region");
return -EINVAL;
}
if (client->info.min_block &&
!QEMU_IS_ALIGNED(hole_size, client->info.min_block)) {
trace_nbd_structured_read_compliance("hole");
}
qemu_iovec_memset(qiov, offset - orig_offset, 0, hole_size);
@@ -245,8 +229,8 @@ static int nbd_parse_offset_hole_payload(NBDClientSession *client,
}
/* nbd_parse_blockstatus_payload
* Based on our request, we expect only one extent in reply, for the
* base:allocation context.
* support only one extent in reply and only for
* base:allocation context
*/
static int nbd_parse_blockstatus_payload(NBDClientSession *client,
NBDStructuredReplyChunk *chunk,
@@ -255,69 +239,36 @@ static int nbd_parse_blockstatus_payload(NBDClientSession *client,
{
uint32_t context_id;
/* The server succeeded, so it must have sent [at least] one extent */
if (chunk->length < sizeof(context_id) + sizeof(*extent)) {
if (chunk->length != sizeof(context_id) + sizeof(*extent)) {
error_setg(errp, "Protocol error: invalid payload for "
"NBD_REPLY_TYPE_BLOCK_STATUS");
return -EINVAL;
}
context_id = payload_advance32(&payload);
if (client->info.context_id != context_id) {
if (client->info.meta_base_allocation_id != context_id) {
error_setg(errp, "Protocol error: unexpected context id %d for "
"NBD_REPLY_TYPE_BLOCK_STATUS, when negotiated context "
"id is %d", context_id,
client->info.context_id);
client->info.meta_base_allocation_id);
return -EINVAL;
}
extent->length = payload_advance32(&payload);
extent->flags = payload_advance32(&payload);
if (extent->length == 0) {
if (extent->length == 0 ||
(client->info.min_block && !QEMU_IS_ALIGNED(extent->length,
client->info.min_block))) {
error_setg(errp, "Protocol error: server sent status chunk with "
"zero length");
"invalid length");
return -EINVAL;
}
/*
* A server sending unaligned block status is in violation of the
* protocol, but as qemu-nbd 3.1 is such a server (at least for
* POSIX files that are not a multiple of 512 bytes, since qemu
* rounds files up to 512-byte multiples but lseek(SEEK_HOLE)
* still sees an implicit hole beyond the real EOF), it's nicer to
* work around the misbehaving server. If the request included
* more than the final unaligned block, truncate it back to an
* aligned result; if the request was only the final block, round
* up to the full block and change the status to fully-allocated
* (always a safe status, even if it loses information).
*/
if (client->info.min_block && !QEMU_IS_ALIGNED(extent->length,
client->info.min_block)) {
trace_nbd_parse_blockstatus_compliance("extent length is unaligned");
if (extent->length > client->info.min_block) {
extent->length = QEMU_ALIGN_DOWN(extent->length,
client->info.min_block);
} else {
extent->length = client->info.min_block;
extent->flags = 0;
}
}
/*
* We used NBD_CMD_FLAG_REQ_ONE, so the server should not have
* sent us any more than one extent, nor should it have included
* status beyond our request in that extent. However, it's easy
* enough to ignore the server's noncompliance without killing the
* connection; just ignore trailing extents, and clamp things to
* the length of our request.
*/
if (chunk->length > sizeof(context_id) + sizeof(*extent)) {
trace_nbd_parse_blockstatus_compliance("more than one extent");
}
/* The server is allowed to send us extra information on the final
* extent; just clamp it to the length we requested. */
if (extent->length > orig_length) {
extent->length = orig_length;
trace_nbd_parse_blockstatus_compliance("extent length too large");
}
return 0;
@@ -383,9 +334,10 @@ static int nbd_co_receive_offset_data_payload(NBDClientSession *s,
return -EINVAL;
}
if (nbd_read64(s->ioc, &offset, "OFFSET_DATA offset", errp) < 0) {
if (nbd_read(s->ioc, &offset, sizeof(offset), errp) < 0) {
return -EIO;
}
be64_to_cpus(&offset);
data_size = chunk->length - sizeof(offset);
assert(data_size);
@@ -395,9 +347,6 @@ static int nbd_co_receive_offset_data_payload(NBDClientSession *s,
" region");
return -EINVAL;
}
if (s->info.min_block && !QEMU_IS_ALIGNED(data_size, s->info.min_block)) {
trace_nbd_structured_read_compliance("data");
}
qemu_iovec_init(&sub_qiov, qiov->niov);
qemu_iovec_concat(&sub_qiov, qiov, offset - orig_offset, data_size);
@@ -435,7 +384,7 @@ static coroutine_fn int nbd_co_receive_structured_payload(
}
*payload = g_new(char, len);
ret = nbd_read(s->ioc, *payload, len, "structured payload", errp);
ret = nbd_read(s->ioc, *payload, len, errp);
if (ret < 0) {
g_free(*payload);
*payload = NULL;
@@ -473,15 +422,14 @@ static coroutine_fn int nbd_co_do_receive_one_chunk(
}
*request_ret = 0;
/* Wait until we're woken up by nbd_connection_entry. */
/* Wait until we're woken up by nbd_read_reply_entry. */
s->requests[i].receiving = true;
qemu_coroutine_yield();
s->requests[i].receiving = false;
if (s->quit) {
if (!s->ioc || s->quit) {
error_setg(errp, "Connection closed");
return -EIO;
}
assert(s->ioc);
assert(s->reply.handle == handle);
@@ -548,29 +496,30 @@ static coroutine_fn int nbd_co_do_receive_one_chunk(
}
/* nbd_co_receive_one_chunk
* Read reply, wake up connection_co and set s->quit if needed.
* Read reply, wake up read_reply_co and set s->quit if needed.
* Return value is a fatal error code or normal nbd reply error code
*/
static coroutine_fn int nbd_co_receive_one_chunk(
NBDClientSession *s, uint64_t handle, bool only_structured,
int *request_ret, QEMUIOVector *qiov, NBDReply *reply, void **payload,
Error **errp)
QEMUIOVector *qiov, NBDReply *reply, void **payload, Error **errp)
{
int request_ret;
int ret = nbd_co_do_receive_one_chunk(s, handle, only_structured,
request_ret, qiov, payload, errp);
&request_ret, qiov, payload, errp);
if (ret < 0) {
s->quit = true;
} else {
/* For assert at loop start in nbd_connection_entry */
/* For assert at loop start in nbd_read_reply_entry */
if (reply) {
*reply = s->reply;
}
s->reply.handle = 0;
ret = request_ret;
}
if (s->connection_co) {
aio_co_wake(s->connection_co);
if (s->read_reply_co) {
aio_co_wake(s->read_reply_co);
}
return ret;
@@ -578,17 +527,22 @@ static coroutine_fn int nbd_co_receive_one_chunk(
typedef struct NBDReplyChunkIter {
int ret;
int request_ret;
bool fatal;
Error *err;
bool done, only_structured;
} NBDReplyChunkIter;
static void nbd_iter_channel_error(NBDReplyChunkIter *iter,
int ret, Error **local_err)
static void nbd_iter_error(NBDReplyChunkIter *iter, bool fatal,
int ret, Error **local_err)
{
assert(ret < 0);
if (!iter->ret) {
if ((fatal && !iter->fatal) || iter->ret == 0) {
if (iter->ret != 0) {
error_free(iter->err);
iter->err = NULL;
}
iter->fatal = fatal;
iter->ret = ret;
error_propagate(&iter->err, *local_err);
} else {
@@ -598,15 +552,6 @@ static void nbd_iter_channel_error(NBDReplyChunkIter *iter,
*local_err = NULL;
}
static void nbd_iter_request_error(NBDReplyChunkIter *iter, int ret)
{
assert(ret < 0);
if (!iter->request_ret) {
iter->request_ret = ret;
}
}
/* NBD_FOREACH_REPLY_CHUNK
*/
#define NBD_FOREACH_REPLY_CHUNK(s, iter, handle, structured, \
@@ -622,13 +567,13 @@ static bool nbd_reply_chunk_iter_receive(NBDClientSession *s,
QEMUIOVector *qiov, NBDReply *reply,
void **payload)
{
int ret, request_ret;
int ret;
NBDReply local_reply;
NBDStructuredReplyChunk *chunk;
Error *local_err = NULL;
if (s->quit) {
error_setg(&local_err, "Connection closed");
nbd_iter_channel_error(iter, -EIO, &local_err);
nbd_iter_error(iter, true, -EIO, &local_err);
goto break_loop;
}
@@ -642,16 +587,14 @@ static bool nbd_reply_chunk_iter_receive(NBDClientSession *s,
}
ret = nbd_co_receive_one_chunk(s, handle, iter->only_structured,
&request_ret, qiov, reply, payload,
&local_err);
qiov, reply, payload, &local_err);
if (ret < 0) {
nbd_iter_channel_error(iter, ret, &local_err);
} else if (request_ret < 0) {
nbd_iter_request_error(iter, request_ret);
/* If it is a fatal error s->quit is set by nbd_co_receive_one_chunk */
nbd_iter_error(iter, s->quit, ret, &local_err);
}
/* Do not execute the body of NBD_FOREACH_REPLY_CHUNK for simple reply. */
if (nbd_reply_is_simple(reply) || s->quit) {
if (nbd_reply_is_simple(&s->reply) || s->quit) {
goto break_loop;
}
@@ -684,7 +627,7 @@ break_loop:
}
static int nbd_co_receive_return_code(NBDClientSession *s, uint64_t handle,
int *request_ret, Error **errp)
Error **errp)
{
NBDReplyChunkIter iter;
@@ -693,13 +636,12 @@ static int nbd_co_receive_return_code(NBDClientSession *s, uint64_t handle,
}
error_propagate(errp, iter.err);
*request_ret = iter.request_ret;
return iter.ret;
}
static int nbd_co_receive_cmdread_reply(NBDClientSession *s, uint64_t handle,
uint64_t offset, QEMUIOVector *qiov,
int *request_ret, Error **errp)
Error **errp)
{
NBDReplyChunkIter iter;
NBDReply reply;
@@ -720,11 +662,11 @@ static int nbd_co_receive_cmdread_reply(NBDClientSession *s, uint64_t handle,
* in qiov */
break;
case NBD_REPLY_TYPE_OFFSET_HOLE:
ret = nbd_parse_offset_hole_payload(s, &reply.structured, payload,
ret = nbd_parse_offset_hole_payload(&reply.structured, payload,
offset, qiov, &local_err);
if (ret < 0) {
s->quit = true;
nbd_iter_channel_error(&iter, ret, &local_err);
nbd_iter_error(&iter, true, ret, &local_err);
}
break;
default:
@@ -734,7 +676,7 @@ static int nbd_co_receive_cmdread_reply(NBDClientSession *s, uint64_t handle,
error_setg(&local_err,
"Unexpected reply type: %d (%s) for CMD_READ",
chunk->type, nbd_reply_type_lookup(chunk->type));
nbd_iter_channel_error(&iter, -EINVAL, &local_err);
nbd_iter_error(&iter, true, -EINVAL, &local_err);
}
}
@@ -743,14 +685,12 @@ static int nbd_co_receive_cmdread_reply(NBDClientSession *s, uint64_t handle,
}
error_propagate(errp, iter.err);
*request_ret = iter.request_ret;
return iter.ret;
}
static int nbd_co_receive_blockstatus_reply(NBDClientSession *s,
uint64_t handle, uint64_t length,
NBDExtent *extent,
int *request_ret, Error **errp)
NBDExtent *extent, Error **errp)
{
NBDReplyChunkIter iter;
NBDReply reply;
@@ -759,7 +699,9 @@ static int nbd_co_receive_blockstatus_reply(NBDClientSession *s,
bool received = false;
assert(!extent->length);
NBD_FOREACH_REPLY_CHUNK(s, iter, handle, false, NULL, &reply, &payload) {
NBD_FOREACH_REPLY_CHUNK(s, iter, handle, s->info.structured_reply,
NULL, &reply, &payload)
{
int ret;
NBDStructuredReplyChunk *chunk = &reply.structured;
@@ -770,7 +712,7 @@ static int nbd_co_receive_blockstatus_reply(NBDClientSession *s,
if (received) {
s->quit = true;
error_setg(&local_err, "Several BLOCK_STATUS chunks in reply");
nbd_iter_channel_error(&iter, -EINVAL, &local_err);
nbd_iter_error(&iter, true, -EINVAL, &local_err);
}
received = true;
@@ -779,7 +721,7 @@ static int nbd_co_receive_blockstatus_reply(NBDClientSession *s,
&local_err);
if (ret < 0) {
s->quit = true;
nbd_iter_channel_error(&iter, ret, &local_err);
nbd_iter_error(&iter, true, ret, &local_err);
}
break;
default:
@@ -789,7 +731,7 @@ static int nbd_co_receive_blockstatus_reply(NBDClientSession *s,
"Unexpected reply type: %d (%s) "
"for CMD_BLOCK_STATUS",
chunk->type, nbd_reply_type_lookup(chunk->type));
nbd_iter_channel_error(&iter, -EINVAL, &local_err);
nbd_iter_error(&iter, true, -EINVAL, &local_err);
}
}
@@ -797,20 +739,21 @@ static int nbd_co_receive_blockstatus_reply(NBDClientSession *s,
payload = NULL;
}
if (!extent->length && !iter.request_ret) {
error_setg(&local_err, "Server did not reply with any status extents");
nbd_iter_channel_error(&iter, -EIO, &local_err);
if (!extent->length && !iter.err) {
error_setg(&iter.err,
"Server did not reply with any status extents");
if (!iter.ret) {
iter.ret = -EIO;
}
}
error_propagate(errp, iter.err);
*request_ret = iter.request_ret;
return iter.ret;
}
static int nbd_co_request(BlockDriverState *bs, NBDRequest *request,
QEMUIOVector *write_qiov)
{
int ret, request_ret;
int ret;
Error *local_err = NULL;
NBDClientSession *client = nbd_get_client_session(bs);
@@ -826,22 +769,17 @@ static int nbd_co_request(BlockDriverState *bs, NBDRequest *request,
return ret;
}
ret = nbd_co_receive_return_code(client, request->handle,
&request_ret, &local_err);
ret = nbd_co_receive_return_code(client, request->handle, &local_err);
if (local_err) {
trace_nbd_co_request_fail(request->from, request->len, request->handle,
request->flags, request->type,
nbd_cmd_lookup(request->type),
ret, error_get_pretty(local_err));
error_free(local_err);
error_report_err(local_err);
}
return ret ? ret : request_ret;
return ret;
}
int nbd_client_co_preadv(BlockDriverState *bs, uint64_t offset,
uint64_t bytes, QEMUIOVector *qiov, int flags)
{
int ret, request_ret;
int ret;
Error *local_err = NULL;
NBDClientSession *client = nbd_get_client_session(bs);
NBDRequest request = {
@@ -856,40 +794,17 @@ int nbd_client_co_preadv(BlockDriverState *bs, uint64_t offset,
if (!bytes) {
return 0;
}
/*
* Work around the fact that the block layer doesn't do
* byte-accurate sizing yet - if the read exceeds the server's
* advertised size because the block layer rounded size up, then
* truncate the request to the server and tail-pad with zero.
*/
if (offset >= client->info.size) {
assert(bytes < BDRV_SECTOR_SIZE);
qemu_iovec_memset(qiov, 0, 0, bytes);
return 0;
}
if (offset + bytes > client->info.size) {
uint64_t slop = offset + bytes - client->info.size;
assert(slop < BDRV_SECTOR_SIZE);
qemu_iovec_memset(qiov, bytes - slop, 0, slop);
request.len -= slop;
}
ret = nbd_co_send_request(bs, &request, NULL);
if (ret < 0) {
return ret;
}
ret = nbd_co_receive_cmdread_reply(client, request.handle, offset, qiov,
&request_ret, &local_err);
&local_err);
if (local_err) {
trace_nbd_co_request_fail(request.from, request.len, request.handle,
request.flags, request.type,
nbd_cmd_lookup(request.type),
ret, error_get_pretty(local_err));
error_free(local_err);
error_report_err(local_err);
}
return ret ? ret : request_ret;
return ret;
}
int nbd_client_co_pwritev(BlockDriverState *bs, uint64_t offset,
@@ -983,7 +898,7 @@ int coroutine_fn nbd_client_co_block_status(BlockDriverState *bs,
int64_t *pnum, int64_t *map,
BlockDriverState **file)
{
int ret, request_ret;
int64_t ret;
NBDExtent extent = { 0 };
NBDClientSession *client = nbd_get_client_session(bs);
Error *local_err = NULL;
@@ -993,60 +908,33 @@ int coroutine_fn nbd_client_co_block_status(BlockDriverState *bs,
.from = offset,
.len = MIN(MIN_NON_ZERO(QEMU_ALIGN_DOWN(INT_MAX,
bs->bl.request_alignment),
client->info.max_block),
MIN(bytes, client->info.size - offset)),
client->info.max_block), bytes),
.flags = NBD_CMD_FLAG_REQ_ONE,
};
if (!client->info.base_allocation) {
*pnum = bytes;
*map = offset;
*file = bs;
return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
return BDRV_BLOCK_DATA;
}
/*
* Work around the fact that the block layer doesn't do
* byte-accurate sizing yet - if the status request exceeds the
* server's advertised size because the block layer rounded size
* up, we truncated the request to the server (above), or are
* called on just the hole.
*/
if (offset >= client->info.size) {
*pnum = bytes;
assert(bytes < BDRV_SECTOR_SIZE);
/* Intentionally don't report offset_valid for the hole */
return BDRV_BLOCK_ZERO;
}
if (client->info.min_block) {
assert(QEMU_IS_ALIGNED(request.len, client->info.min_block));
}
ret = nbd_co_send_request(bs, &request, NULL);
if (ret < 0) {
return ret;
}
ret = nbd_co_receive_blockstatus_reply(client, request.handle, bytes,
&extent, &request_ret, &local_err);
&extent, &local_err);
if (local_err) {
trace_nbd_co_request_fail(request.from, request.len, request.handle,
request.flags, request.type,
nbd_cmd_lookup(request.type),
ret, error_get_pretty(local_err));
error_free(local_err);
error_report_err(local_err);
}
if (ret < 0 || request_ret < 0) {
return ret ? ret : request_ret;
if (ret < 0) {
return ret;
}
assert(extent.length);
*pnum = extent.length;
*map = offset;
*file = bs;
return (extent.flags & NBD_STATE_HOLE ? 0 : BDRV_BLOCK_DATA) |
(extent.flags & NBD_STATE_ZERO ? BDRV_BLOCK_ZERO : 0) |
BDRV_BLOCK_OFFSET_VALID;
(extent.flags & NBD_STATE_ZERO ? BDRV_BLOCK_ZERO : 0);
}
void nbd_client_detach_aio_context(BlockDriverState *bs)
@@ -1055,30 +943,12 @@ void nbd_client_detach_aio_context(BlockDriverState *bs)
qio_channel_detach_aio_context(QIO_CHANNEL(client->ioc));
}
static void nbd_client_attach_aio_context_bh(void *opaque)
{
BlockDriverState *bs = opaque;
NBDClientSession *client = nbd_get_client_session(bs);
/* The node is still drained, so we know the coroutine has yielded in
* nbd_read_eof(), the only place where bs->in_flight can reach 0, or it is
* entered for the first time. Both places are safe for entering the
* coroutine.*/
qemu_aio_coroutine_enter(bs->aio_context, client->connection_co);
bdrv_dec_in_flight(bs);
}
void nbd_client_attach_aio_context(BlockDriverState *bs,
AioContext *new_context)
{
NBDClientSession *client = nbd_get_client_session(bs);
qio_channel_attach_aio_context(QIO_CHANNEL(client->ioc), new_context);
bdrv_inc_in_flight(bs);
/* Need to wait here for the BH to run because the BH must run while the
* node is still drained. */
aio_wait_bh_oneshot(new_context, nbd_client_attach_aio_context_bh, bs);
aio_co_schedule(new_context, client->read_reply_co);
}
void nbd_client_close(BlockDriverState *bs)
@@ -1086,55 +956,25 @@ void nbd_client_close(BlockDriverState *bs)
NBDClientSession *client = nbd_get_client_session(bs);
NBDRequest request = { .type = NBD_CMD_DISC };
assert(client->ioc);
if (client->ioc == NULL) {
return;
}
nbd_send_request(client->ioc, &request);
nbd_teardown_connection(bs);
}
static QIOChannelSocket *nbd_establish_connection(SocketAddress *saddr,
Error **errp)
{
QIOChannelSocket *sioc;
Error *local_err = NULL;
sioc = qio_channel_socket_new();
qio_channel_set_name(QIO_CHANNEL(sioc), "nbd-client");
qio_channel_socket_connect_sync(sioc, saddr, &local_err);
if (local_err) {
object_unref(OBJECT(sioc));
error_propagate(errp, local_err);
return NULL;
}
qio_channel_set_delay(QIO_CHANNEL(sioc), false);
return sioc;
}
static int nbd_client_connect(BlockDriverState *bs,
SocketAddress *saddr,
const char *export,
QCryptoTLSCreds *tlscreds,
const char *hostname,
const char *x_dirty_bitmap,
Error **errp)
int nbd_client_init(BlockDriverState *bs,
QIOChannelSocket *sioc,
const char *export,
QCryptoTLSCreds *tlscreds,
const char *hostname,
Error **errp)
{
NBDClientSession *client = nbd_get_client_session(bs);
int ret;
/*
* establish TCP connection, return error if it fails
* TODO: Configurable retry-until-timeout behaviour.
*/
QIOChannelSocket *sioc = nbd_establish_connection(saddr, errp);
if (!sioc) {
return -ECONNREFUSED;
}
/* NBD handshake */
logout("session init %s\n", export);
qio_channel_set_blocking(QIO_CHANNEL(sioc), true, NULL);
@@ -1142,28 +982,18 @@ static int nbd_client_connect(BlockDriverState *bs,
client->info.request_sizes = true;
client->info.structured_reply = true;
client->info.base_allocation = true;
client->info.x_dirty_bitmap = g_strdup(x_dirty_bitmap);
client->info.name = g_strdup(export ?: "");
ret = nbd_receive_negotiate(QIO_CHANNEL(sioc), tlscreds, hostname,
ret = nbd_receive_negotiate(QIO_CHANNEL(sioc), export,
tlscreds, hostname,
&client->ioc, &client->info, errp);
g_free(client->info.x_dirty_bitmap);
g_free(client->info.name);
if (ret < 0) {
logout("Failed to negotiate with the NBD server\n");
object_unref(OBJECT(sioc));
return ret;
}
if (x_dirty_bitmap && !client->info.base_allocation) {
error_setg(errp, "requested x-dirty-bitmap %s not found",
x_dirty_bitmap);
ret = -EINVAL;
goto fail;
}
if (client->info.flags & NBD_FLAG_READ_ONLY) {
ret = bdrv_apply_auto_read_only(bs, "NBD export is read-only", errp);
if (ret < 0) {
goto fail;
}
if (client->info.flags & NBD_FLAG_READ_ONLY &&
!bdrv_is_read_only(bs)) {
error_setg(errp,
"request for write access conflicts with read-only export");
return -EACCES;
}
if (client->info.flags & NBD_FLAG_SEND_FUA) {
bs->supported_write_flags = BDRV_REQ_FUA;
@@ -1173,7 +1003,10 @@ static int nbd_client_connect(BlockDriverState *bs,
bs->supported_zero_flags |= BDRV_REQ_MAY_UNMAP;
}
qemu_co_mutex_init(&client->send_mutex);
qemu_co_queue_init(&client->free_sema);
client->sioc = sioc;
object_ref(OBJECT(client->sioc));
if (!client->ioc) {
client->ioc = QIO_CHANNEL(sioc);
@@ -1183,44 +1016,9 @@ static int nbd_client_connect(BlockDriverState *bs,
/* Now that we're connected, set the socket to be non-blocking and
* kick the reply mechanism. */
qio_channel_set_blocking(QIO_CHANNEL(sioc), false, NULL);
client->connection_co = qemu_coroutine_create(nbd_connection_entry, client);
bdrv_inc_in_flight(bs);
client->read_reply_co = qemu_coroutine_create(nbd_read_reply_entry, client);
nbd_client_attach_aio_context(bs, bdrv_get_aio_context(bs));
logout("Established connection with NBD server\n");
return 0;
fail:
/*
* We have connected, but must fail for other reasons. The
* connection is still blocking; send NBD_CMD_DISC as a courtesy
* to the server.
*/
{
NBDRequest request = { .type = NBD_CMD_DISC };
nbd_send_request(client->ioc ?: QIO_CHANNEL(sioc), &request);
object_unref(OBJECT(sioc));
return ret;
}
}
int nbd_client_init(BlockDriverState *bs,
SocketAddress *saddr,
const char *export,
QCryptoTLSCreds *tlscreds,
const char *hostname,
const char *x_dirty_bitmap,
Error **errp)
{
NBDClientSession *client = nbd_get_client_session(bs);
client->bs = bs;
qemu_co_mutex_init(&client->send_mutex);
qemu_co_queue_init(&client->free_sema);
return nbd_client_connect(bs, saddr, export, tlscreds, hostname,
x_dirty_bitmap, errp);
}

View File

@@ -20,7 +20,7 @@
typedef struct {
Coroutine *coroutine;
uint64_t offset; /* original offset of the request */
bool receiving; /* waiting for connection_co? */
bool receiving; /* waiting for read_reply_co? */
} NBDClientRequest;
typedef struct NBDClientSession {
@@ -30,23 +30,21 @@ typedef struct NBDClientSession {
CoMutex send_mutex;
CoQueue free_sema;
Coroutine *connection_co;
Coroutine *read_reply_co;
int in_flight;
NBDClientRequest requests[MAX_NBD_REQUESTS];
NBDReply reply;
BlockDriverState *bs;
bool quit;
} NBDClientSession;
NBDClientSession *nbd_get_client_session(BlockDriverState *bs);
int nbd_client_init(BlockDriverState *bs,
SocketAddress *saddr,
QIOChannelSocket *sock,
const char *export_name,
QCryptoTLSCreds *tlscreds,
const char *hostname,
const char *x_dirty_bitmap,
Error **errp);
void nbd_client_close(BlockDriverState *bs);

Some files were not shown because too many files have changed in this diff Show More