Current and upcoming mesa releases rely on a shader disk cash. It uses
a thread job queue with low priority, set with
sched_setscheduler(SCHED_IDLE). However, that syscall is rejected by
the "resourcecontrol" seccomp qemu filter.
Since it should be safe to allow lowering thread priority, let's allow
scheduling thread to idle policy.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1594456
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Provide monitor naming of xen disks, and plumb guest driver
notification through xenstore of resizing instigated via the
monitor.
Signed-off-by: Bruce Rogers <brogers@suse.com>
AHCI presently signals completion prior to the PxCI register being
cleared to indicate completion. If a guest driver attempts to issue
a new command in its IRQ handler, it might be surprised to learn there
is still a command pending.
In the case of Windows 10's boot driver, it will actually poll the IRQ
register hoping to find out when the command is done running -- which
will never happen, as there isn't a command running.
Fix this: clear PxCI in ahci_cmd_done and not in the asynchronous BH.
Because it now runs synchronously, we don't need to check if the command
is actually done by spying on the ATA registers. We know it's done.
Signed-off-by: John Snow <jsnow@redhat.com>
[BR: BSC#1094406]
Signed-off-by: Bruce Rogers <brogers@suse.com>
AMD Zen expose the Intel equivalant to Speculative Store Bypass Disable
via the 0x80000008_EBX[25] CPUID feature bit.
This needs to be exposed to guest OS to allow them to protect
against CVE-2018-3639.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180521215424.13520-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit 403503b162)
[BR: BSC#1092885]
Signed-off-by: Bruce Rogers <brogers@suse.com>
"Some AMD processors only support a non-architectural means of enabling
speculative store bypass disable (SSBD). To allow a simplified view of
this to a guest, an architectural definition has been created through a new
CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f. With this, a
hypervisor can virtualize the existence of this definition and provide an
architectural method for using SSBD to a guest.
Add the new CPUID feature, the new MSR and update the existing SSBD
support to use this MSR when present." (from x86/speculation: Add virtualized
speculative store bypass disable support in Linux).
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180521215424.13520-4-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit cfeea0c021)
[BR: BSC#1092885]
Signed-off-by: Bruce Rogers <brogers@suse.com>
Commit c22a03454 QAPIfied option parsing in the NFS block driver, but
forgot to remove all the options we processed. Therefore, we get an
error in bdrv_open_inherit(), which thinks the remaining options are
invalid. Trying to open an NFS image will result in an error like this:
Block protocol 'nfs' doesn't support the option 'server.host'
Remove all options from the QDict to make the NFS driver work again.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20180516160816.26259-1-kwolf@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit c82be42cc8)
Signed-off-by: Bruce Rogers <brogers@suse.com>
img_open_opts() takes a QemuOpts and converts them to a QDict, so all
values therein are strings. Then it may try to call qdict_get_bool(),
however, which will fail with a segmentation fault every time:
$ ./qemu-img info -U --image-opts \
driver=file,filename=/dev/null,force-share=off
[1] 27869 segmentation fault (core dumped) ./qemu-img info -U
--image-opts driver=file,filename=/dev/null,force-share=off
Fix this by using qdict_get_str() and comparing the value as a string.
Also, when adding a force-share value to the QDict, add it as a string
so it fits the rest of the dict.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 4615f87832)
Signed-off-by: Bruce Rogers <brogers@suse.com>
Currently, qemu-io only uses string-valued blockdev options (as all are
converted directly from QemuOpts) -- with one exception: -U adds the
force-share option as a boolean. This in itself is already a bit
questionable, but a real issue is that it also assumes the value already
existing in the options QDict would be a boolean, which is wrong.
That has the following effect:
$ ./qemu-io -r -U --image-opts \
driver=file,filename=/dev/null,force-share=off
[1] 15200 segmentation fault (core dumped) ./qemu-io -r -U
--image-opts driver=file,filename=/dev/null,force-share=off
Since @opts is converted from QemuOpts, the value must be a string, and
we have to compare it as such. Consequently, it makes sense to also set
it as a string instead of a boolean.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 2a01c01f9e)
Signed-off-by: Bruce Rogers <brogers@suse.com>
Every job gets a non-NULL job->txn on creation, but it doesn't
necessarily keep it until it is decommissioned: Finalising a job removes
it from its transaction. Therefore, calling 'blockdev-job-finalize' a
second time on an already concluded job causes an assertion failure.
Remove job->txn from the assertion in block_job_finalize() to fix this.
block_job_do_finalize() still has the same assertion, but if a job is
already removed from its transaction, block_job_apply_verb() will
already error out before we run into that assertion.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 37aa19b63c)
Signed-off-by: Bruce Rogers <brogers@suse.com>
When we've reached the concluded state, we need to expose the error
state if applicable. Add the new field.
This should be sufficient for determining if a job completed
successfully or not after concluding; if we want to discriminate
based on how it failed more mechanically, we can always add an
explicit return code enumeration later.
I didn't bother to make it only show up if we are in the concluded
state; I don't think it's necessary.
Cc: qemu-stable@nongnu.org
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit ab9ba61455)
Signed-off-by: Bruce Rogers <brogers@suse.com>
Thomas reported that the subchannel for a 3270 device that ended up
in a broken state (status pending even though not enabled) did not
get out of that state even after a reboot (which involves a subsytem
reset). The reason for this is that the 3270 device did not define
a reset handler.
Let's fix this by introducing a base reset handler (set up for all
ccw devices) that resets the subchannel and have virtio-ccw call
its virtio-specific reset procedure in addition to that.
CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 838fb84f83)
Signed-off-by: Bruce Rogers <brogers@suse.com>
I've run into a compilation error today with the current version of GCC 8:
In file included from s390-ccw.h:49,
from main.c:12:
cio.h:128:1: error: alignment 1 of 'struct tpi_info' is less than 4 [-Werror=packed-not-aligned]
} __attribute__ ((packed));
^
cc1: all warnings being treated as errors
Since the struct tpi_info contains an element ("struct subchannel_id schid")
which is marked as aligned(4), we've got to mark the struct tpi_info as
aligned(4), too.
CC: qemu-stable@nongnu.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525774672-11913-1-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit a6e4385dea)
Signed-off-by: Bruce Rogers <brogers@suse.com>
The 3270 code will try to post an attention interrupt when the
3270 emulator (e.g. x3270) attaches. If the guest has not yet
enabled the subchannel for the 3270 device, we will present a spurious
cc 1 (status pending) when it uses msch on it later on, e.g. when
trying to enable the subchannel.
To fix this, just don't do anything in css_conditional_io_interrupt()
if the subchannel is not enabled. The 3270 code will work fine with
that, and the other user of this function (virtio-ccw) never
attempts to post an interrupt for a disabled device to begin with.
CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 6e9c893ecd)
Signed-off-by: Bruce Rogers <brogers@suse.com>
In 6001f7729e we partially attempt to address the branch
displacement overflow caused by 15fa08f845.
However, gcc/testsuite/gcc.target/aarch64/advsimd-intrinsics/vqtbX.c
is a testcase that contains a TB so large as to overflow anyway.
The limit here of 8000 ops produces a maximum output TB size of
24112 bytes on a ppc64le host with that test case. This is still
much less than the maximum forward branch distance of 32764 bytes.
Cc: qemu-stable@nongnu.org
Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit abebf92597)
Signed-off-by: Bruce Rogers <brogers@suse.com>
The NBD spec is proposing a relaxation of NBD_CMD_BLOCK_STATUS
where a server may have the final extent per context give a
length beyond the original request, if it can easily prove that
subsequent bytes have the same status, on the grounds that a
client can take advantage of this information for fewer block
status requests. Since qemu 2.12 as a client always sends
NBD_CMD_FLAG_REQ_ONE, and rejects a server that sends extra
length, the upstream NBD spec will probably limit this behavior
to clients that don't request REQ_ONE semantics; but it doesn't
hurt to relax qemu to always be permissive of this server
behavior, even if it continues to use REQ_ONE.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180503222626.1303410-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit acfd8f7a5f)
Signed-off-by: Bruce Rogers <brogers@suse.com>
Initialize received variable. Otherwise, is is possible for server to
answer without any contexts, but we will set context_id to something
random (received_id is not initialized too) and return 1, which is
wrong.
To solve it, just initialize received to false. Initialize received_id
too, just to make all possible checkers happy.
Bug was introduced in 78a33ab587 "nbd: BLOCK_STATUS for
standard get_block_status function: client part" with the whole
function.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180427142002.21930-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 89aa0d8763)
Signed-off-by: Bruce Rogers <brogers@suse.com>
We currently pass an integer as the subcode parameter. However,
the upper bits of the register containing the subcode need to
be 0, which is not guaranteed unless we explicitly specify the
subcode to be an unsigned long value.
Fixes: d046c51dad ("pc-bios/s390-ccw: Get device address via diag 308/6")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 63d8b5ace3)
Signed-off-by: Bruce Rogers <brogers@suse.com>
I found with qemu 2.11.x or newer that I would get an illegal instruction
error running some Intel binaries on my ARM chromebook. On investigation,
I found it was quitting on memory barriers.
qemu instruction:
mb $0x31
was translating as:
0x604050cc: 5bf07ff5 blpl #0x600250a8
After patch it gives:
0x604050cc: f57ff05b dmb ish
In short, I found INSN_DMB_ISH (memory barrier for ARMv7) appeared to be
correct based on online docs, but due to some endian-related shenanigans it
had to be byte-swapped to suit qemu; it appears INSN_DMB_MCR (memory
barrier for ARMv6) also should be byte swapped (and this patch does so).
I have not checked for correctness of aarch64's barrier instruction.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Henry Wertz <hwertz10@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 3f814b8037)
Signed-off-by: Bruce Rogers <brogers@suse.com>
Commit d7d218ef02 attempted to change
dwProtocols to only advertise support for T=0 and not T=1. The change
was incorrect as it changed 0x00000003 to 0x00010000.
lsusb -v in a linux guest shows:
"dwProtocols 65536 (Invalid values detected)", though the
smart card could still be accessed. Windows 7 does not detect inserted
smart cards and logs the the following Error in the Event Logs:
Source: Smart Card Service
Event ID: 610
Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
Incorrect function. If this error persists, your smart card or reader
may not be functioning correctly
Command Header: 03 00 00 00
Setting to 0x00000001 fixes the Windows issue.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20180420183219.20722-1-jandryuk@gmail.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 0ee86bb6c5)
Signed-off-by: Bruce Rogers <brogers@suse.com>
It is not uncommon for a contemporary FDT to be larger than 64 KiB,
leading to failures loading the device tree from sysfs:
qemu-system-aarch64: qemu_fdt_setprop: Couldn't set ...: FDT_ERR_NOSPACE
Hence increase the limit to 1 MiB, like on PPC.
For reference, the largest arm64 DTB created from the Linux sources is
ca. 75 KiB large (100 KiB when built with symbols/fixup support).
Cc: qemu-stable@nongnu.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-id: 1523541337-23919-1-git-send-email-geert+renesas@glider.be
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 14ec3cbd7c)
Signed-off-by: Bruce Rogers <brogers@suse.com>
I imagine there is more to be done to fix the memory consistency
races here, but these added barriers at least let it pass on ppc64le,
whereas before it would fail regularly there.
Signed-off-by: Bruce Rogers <brogers@suse.com>
The following issues are seen:
130 - timeout resulting from failed to get shared "write" lock
153 - failed to get "write" lock
162 - occasional, using nbd, network unreachable
Signed-off-by: Bruce Rogers <brogers@suse.com>
Because the block io tests are not yet ported to python3, change
the python env var to explicitly reference python2.
Signed-off-by: Bruce Rogers <brogers@suse.com>
If user specifies smbios table files through qemu command line, Then will
get error messages while decoding those table content in guest.
Reproducer:
1. dump a smbios table(say table 1) to a binary file from a pc.
2. load the binary file through command line: 'qemu -smbios file=...'.
3. perform 'dmidecode' or 'dmidecode -t 1' in guest.
It reports 'Invalid entry length...' because qemu doesn't add terminator(s)
correctly for the table.
This patch fixed the issue by:
For smbios tables which have string fields provided, qemu should add 1 terminator.
For smbios tables which dont have string fields provided, qemu should add 2.
[LM: BSC#994082]
[LM: BSC#1084316]
Signed-off-by: Lin Ma <lma@suse.com>
As an attempt to help the user do the right thing, warn if we
detect spec_ctrl data in the migration stream, but where the
cpu defined doesn't have the feature. This would indicate the
migration is from the quick and dirty qemu produced in January
2018 to handle Spectre v2. That qemu version exposed the IBRS
cpu feature to all vcpu types, which helped in the short term
but wasn't a well designed approach.
Warn the user that the now migrated guest needs to be restarted
as soon as possible, using the spec_ctrl cpu feature flag or a
*-IBRS vcpu model specified as appropriate.
Signed-off-by: Bruce Rogers <brogers@suse.com>
This is one step towards having our python support be explicitly
either python2 or python3.
[BR: BSC#1077564]
Signed-off-by: Bruce Rogers <brogers@suse.com>
Test scsi-{disk,hd,cd} wwn properties for correct 64-bit parsing.
For now piggyback on virtio-scsi.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All integers would get parsed by strtoll(), not handling the case of
UINT64 properties with the most significient bit set.
Implement a .type_uint64 visitor callback, reusing the existing
parse_str() code through a new argument, using strtoull().
As this is a bug fix, it intentionally ignores checkpatch warnings to
prefer the use of qemu_strto[u]ll() over strto[u]ll().
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Using xen tools 'xl vncviewer' with tigervnc (default on SLE-12),
found that: the display of the guest is unexpected while keep
pressing a key. We expect the same character multiple times, but
it prints only one time. This happens on a PV guest in text mode.
After debugging, found that tigervnc sends repeated key down events
in this case, to differentiate from user pressing the same key many
times. Vnc server only prints the character when it finally receives
key up event.
To solve this issue, this patch tries to add additional key up event
before the next repeated key down event (if the key is not a control
key).
[CYL: BSC#882405]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
qemu-kvm 0.15 uses the same GPE format as qemu 1.4, but as version 2
rather than 3.
Addresses part of BNC#812836.
Signed-off-by: Andreas Färber <afaerber@suse.de>
qemu-kvm 0.15 had a VMSTATE_UINT32(flags, PITState) field that
qemu 1.4 does not have.
Addresses part of BNC#812836.
Signed-off-by: Andreas Färber <afaerber@suse.de>
qemu-kvm.git commit a7fe0297840908a4fd65a1cf742481ccd45960eb
(Extend vram size to 16MB) deviated from qemu.git since kvm-61, and only
in commit 9e56edcf8d (vga: raise default
vgamem size) did qemu.git adjust the VRAM size for v1.2.
Add compatibility properties so that up to and including pc-0.15 we
maintain migration compatibility with qemu-kvm rather than QEMU and
from pc-1.0 on with QEMU (last qemu-kvm release was 1.2).
Addresses part of BNC#812836.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[BR: adjust comma position in list in macro for v2.5.0 compat]
Signed-off-by: Bruce Rogers <brogers@suse.com>
Allow for guests with higher amounts of ram. The current thought
is that 2TB specified on qemu commandline would be an appropriate
limit. Note that this requires the next higher bit value since
the highest address is actually more than 2TB due to the pci
memory hole.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
For SLES we want users to be able to use large memory configurations
with KVM without fiddling with ulimit -Sv.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[BR: add include for sys/resource.h]
Signed-off-by: Bruce Rogers <brogers@suse.com>
Certain rom subpackages build from qemu git-submodules call the date
program to include date information in the packaged binaries. This
causes repeated builds of the package to be different, wkere the only
real difference is due to the fact that time build timestamp has
changed. To promote reproducible builds and avoid customers being
prompted to update packages needlessly, we'll use the timestamp of the
VERSION file as the packaging timestamp for all packages that build in a
timestamp for whatever reason.
[BR: BSC#1011213]
Signed-off-by: Bruce Rogers <brogers@suse.com>
After "linux-user: use target_ulong" the poll syscall was no longer
handling infinite timeout.
/home/abuild/rpmbuild/BUILD/qemu-2.7.0-rc5/linux-user/syscall.c:9773:26: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
if (arg3 >= 0) {
^~
Signed-off-by: Andreas Schwab <schwab@suse.de>
Change from using glib alloc and free routines to those
from libc. Also perform safety measure of dropping privs
to user if configured no-caps.
[BR: BOO#988279]
Signed-off-by: Bruce Rogers <brogers@suse.com>
[AF: Rebased for v2.7.0-rc2]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add code to read the suse specific suse-diskcache-disable-flush flag out
of xenstore, and set the equivalent flag within QEMU.
Patch taken from Xen's patch queue, Olaf Hering being the original author.
[bsc#879425]
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
On hosts with limited virtual address space (32bit pointers), we can very
easily run out of virtual memory with big thread pools.
Instead, we should limit ourselves to small pools to keep memory footprint
low on those systems.
This patch fixes random VM stalls like
(process:25114): GLib-ERROR **: gmem.c:103: failed to allocate 1048576 bytes
on 32bit ARM systems for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
When doing lseek, SEEK_SET indicates that the offset is an unsigned variable.
Other seek types have parameters that can be negative.
When converting from 32bit to 64bit parameters, we need to take this into
account and enable SEEK_END and SEEK_CUR to be negative, while SEEK_SET stays
absolute positioned which we need to maintain as unsigned.
Signed-off-by: Alexander Graf <agraf@suse.de>
Virtio-Console can only process one character at a time. Using it on S390
gave me strage "lags" where I got the character I pressed before when
pressing one. So I typed in "abc" and only received "a", then pressed "d"
but the guest received "b" and so on.
While the stdio driver calls a poll function that just processes on its
queue in case virtio-console can't take multiple characters at once, the
muxer does not have such callbacks, so it can't empty its queue.
To work around that limitation, I introduced a new timer that only gets
active when the guest can not receive any more characters. In that case
it polls again after a while to check if the guest is now receiving input.
This patch fixes input when using -nographic on s390 for me.
[AF: Rebased for v2.7.0-rc2]
Linux syscalls pass pointers or data length or other information of that sort
to the kernel. This is all stuff you don't want to have sign extended.
Otherwise a host 64bit variable parameter with a size parameter will extend
it to a negative number, breaking lseek for example.
Pass syscall arguments as ulong always.
Signed-off-by: Alexander Graf <agraf@suse.de>
This causes LP#1738283. Gerd will have to come up with a better
fix, but just hacking out the problematic key definition should
work for now.
[BR: We see this issue as well, eg via vnc]
Signed-off-by: Bruce Rogers <brogers@suse.com>
Fedora 17 for ARM reads /proc/cpuinfo and fails if it doesn't contain
ARM related contents. This patch implements a quick hack to expose real
/proc/cpuinfo data taken from a real world machine.
The real fix would be to generate at least the flags automatically based
on the selected CPU. Please do not submit this patch upstream until this
has happened.
Signed-off-by: Alexander Graf <agraf@suse.de>
[AF: Rebased for v1.6 and v1.7]
Signed-off-by: Andreas Färber <afaerber@suse.de>
When we have a working host binary equivalent for the guest binary we're
trying to run, let's just use that instead as it will be a lot faster.
Signed-off-by: Alexander Graf <agraf@suse.de>
When entering the guest we take a lock to ensure that nobody else messes
with our TB chaining while we're doing it. If we get a segfault inside that
code, we manage to work on, but will not unlock the lock.
This patch forces unlocking of that lock in the segv handler. I'm not sure
this is the right approach though. Maybe we should rather make sure we don't
segfault in the code? I would greatly appreciate someone more intelligible
than me to look at this :).
Example code to trigger this is at: http://csgraf.de/tmp/conftest.c
Reported-by: Fabio Erculiani <lxnay@sabayon.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
[AF: Drop spinlock_safe_unlock() and switch to tb_lock_reset() (bonzini)]
Signed-off-by: Andreas Färber <afaerber@suse.de>
When using hugetlbfs (which is required for HV mode KVM on 970), we
check for MMU notifiers that on 970 can not be implemented properly.
So disable the check for mmu notifiers on PowerPC guests, making
KVM guests work there, even if possibly racy in some odd circumstances.
When using qemu's linux-user binaries through binfmt, argv[0] gets lost
along the execution because qemu only gets passed in the full file name
to the executable while argv[0] can be something completely different.
This breaks in some subtile situations, such as the grep and make test
suites.
This patch adds a wrapper binary called qemu-$TARGET-binfmt that can be
used with binfmt's P flag which passes the full path _and_ argv[0] to
the binfmt handler.
The binary would be smart enough to be versatile and only exist in the
system once, creating the qemu binary path names from its own argv[0].
However, this seemed like it didn't fit the make system too well, so
we're currently creating a new binary for each target archictecture.
CC: Reinhard Max <max@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
[AF: Rebased onto new Makefile infrastructure, twice]
[AF: Updated for aarch64 for v2.0.0-rc1]
[AF: Rebased onto Makefile changes for v2.1.0-rc0]
[AF: Rebased onto script rewrite for v2.7.0-rc2 - to be fixed]
Signed-off-by: Andreas Färber <afaerber@suse.de>
the direction given in the ioctl should be correct so we can assume the
communication is uni-directional. The alsa developers did not like this
concept though and declared ioctls IOC_R and IOC_W even though they were
IOC_RW.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Ulrich Hecht <uli@suse.de>
