glib/gio/gsimpleaction.c

601 lines
18 KiB
C
Raw Normal View History

/*
* Copyright © 2010 Codethink Limited
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published
* by the Free Software Foundation; either version 2 of the licence or (at
* your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General
* Public License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place, Suite 330,
* Boston, MA 02111-1307, USA.
*
* Authors: Ryan Lortie <desrt@desrt.ca>
*/
#include "config.h"
#include "gsimpleaction.h"
#include "gaction.h"
#include "glibintl.h"
/**
* SECTION:gsimpleaction
* @title: GSimpleAction
* @short_description: A simple GAction implementation
2014-01-08 04:55:43 +01:00
* @include: gio/gio.h
*
2011-06-24 15:04:54 +02:00
* A #GSimpleAction is the obvious simple implementation of the #GAction
* interface. This is the easiest way to create an action for purposes of
* adding it to a #GSimpleActionGroup.
*
* See also #GtkAction.
*/
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
struct _GSimpleAction
{
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
GObject parent_instance;
gchar *name;
GVariantType *parameter_type;
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
gboolean enabled;
GVariant *state;
gboolean state_set_already;
};
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
typedef GObjectClass GSimpleActionClass;
static void g_simple_action_iface_init (GActionInterface *iface);
G_DEFINE_TYPE_WITH_CODE (GSimpleAction, g_simple_action, G_TYPE_OBJECT,
G_IMPLEMENT_INTERFACE (G_TYPE_ACTION, g_simple_action_iface_init))
enum
{
PROP_NONE,
PROP_NAME,
PROP_PARAMETER_TYPE,
PROP_ENABLED,
PROP_STATE_TYPE,
PROP_STATE
};
enum
{
SIGNAL_CHANGE_STATE,
SIGNAL_ACTIVATE,
NR_SIGNALS
};
static guint g_simple_action_signals[NR_SIGNALS];
static const gchar *
g_simple_action_get_name (GAction *action)
{
GSimpleAction *simple = G_SIMPLE_ACTION (action);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
return simple->name;
}
2011-10-17 03:24:45 +02:00
static const GVariantType *
g_simple_action_get_parameter_type (GAction *action)
{
GSimpleAction *simple = G_SIMPLE_ACTION (action);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
return simple->parameter_type;
}
static const GVariantType *
g_simple_action_get_state_type (GAction *action)
{
GSimpleAction *simple = G_SIMPLE_ACTION (action);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
if (simple->state != NULL)
return g_variant_get_type (simple->state);
else
return NULL;
}
static GVariant *
g_simple_action_get_state_hint (GAction *action)
{
return NULL;
}
static gboolean
g_simple_action_get_enabled (GAction *action)
{
GSimpleAction *simple = G_SIMPLE_ACTION (action);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
return simple->enabled;
}
static void
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
g_simple_action_change_state (GAction *action,
GVariant *value)
{
GSimpleAction *simple = G_SIMPLE_ACTION (action);
/* If the user connected a signal handler then they are responsible
* for handling state changes.
*/
if (g_signal_has_handler_pending (action, g_simple_action_signals[SIGNAL_CHANGE_STATE], 0, TRUE))
g_signal_emit (action, g_simple_action_signals[SIGNAL_CHANGE_STATE], 0, value);
/* If not, then the default behaviour is to just set the state. */
else
g_simple_action_set_state (simple, value);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
}
/**
* g_simple_action_set_state:
* @simple: a #GSimpleAction
* @value: the new #GVariant for the state
*
* Sets the state of the action.
*
* This directly updates the 'state' property to the given value.
*
* This should only be called by the implementor of the action. Users
* of the action should not attempt to directly modify the 'state'
* property. Instead, they should call g_action_change_state() to
* request the change.
*
* If the @value GVariant is floating, it is consumed.
*
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
* Since: 2.30
**/
void
g_simple_action_set_state (GSimpleAction *simple,
GVariant *value)
{
g_return_if_fail (G_IS_SIMPLE_ACTION (simple));
g_return_if_fail (value != NULL);
{
const GVariantType *state_type;
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
state_type = simple->state ?
g_variant_get_type (simple->state) : NULL;
g_return_if_fail (state_type != NULL);
g_return_if_fail (g_variant_is_of_type (value, state_type));
}
g_variant_ref_sink (value);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
if (!simple->state || !g_variant_equal (simple->state, value))
{
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
if (simple->state)
g_variant_unref (simple->state);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
simple->state = g_variant_ref (value);
g_object_notify (G_OBJECT (simple), "state");
}
g_variant_unref (value);
}
static GVariant *
g_simple_action_get_state (GAction *action)
{
GSimpleAction *simple = G_SIMPLE_ACTION (action);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
return simple->state ? g_variant_ref (simple->state) : NULL;
}
static void
g_simple_action_activate (GAction *action,
GVariant *parameter)
{
GSimpleAction *simple = G_SIMPLE_ACTION (action);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
g_return_if_fail (simple->parameter_type == NULL ?
parameter == NULL :
(parameter != NULL &&
g_variant_is_of_type (parameter,
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
simple->parameter_type)));
if (parameter != NULL)
g_variant_ref_sink (parameter);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
if (simple->enabled)
{
/* If the user connected a signal handler then they are responsible
* for handling activation.
*/
if (g_signal_has_handler_pending (action, g_simple_action_signals[SIGNAL_ACTIVATE], 0, TRUE))
g_signal_emit (action, g_simple_action_signals[SIGNAL_ACTIVATE], 0, parameter);
/* If not, do some reasonable defaults for stateful actions. */
else if (simple->state)
{
/* If we have no parameter and this is a boolean action, toggle. */
if (parameter == NULL && g_variant_is_of_type (simple->state, G_VARIANT_TYPE_BOOLEAN))
{
gboolean was_enabled = g_variant_get_boolean (simple->state);
g_simple_action_change_state (action, g_variant_new_boolean (!was_enabled));
}
/* else, if the parameter and state type are the same, do a change-state */
else if (g_variant_is_of_type (simple->state, g_variant_get_type (parameter)))
g_simple_action_change_state (action, parameter);
}
}
if (parameter != NULL)
g_variant_unref (parameter);
}
static void
g_simple_action_set_property (GObject *object,
guint prop_id,
const GValue *value,
GParamSpec *pspec)
{
GSimpleAction *action = G_SIMPLE_ACTION (object);
switch (prop_id)
{
case PROP_NAME:
action->name = g_strdup (g_value_get_string (value));
break;
case PROP_PARAMETER_TYPE:
action->parameter_type = g_value_dup_boxed (value);
break;
case PROP_ENABLED:
action->enabled = g_value_get_boolean (value);
break;
case PROP_STATE:
/* The first time we see this (during construct) we should just
* take the state as it was handed to us.
*
* After that, we should make sure we go through the same checks
* as the C API.
*/
if (!action->state_set_already)
{
action->state = g_value_dup_variant (value);
action->state_set_already = TRUE;
}
else
g_simple_action_set_state (action, g_value_get_variant (value));
break;
default:
g_assert_not_reached ();
}
}
static void
g_simple_action_get_property (GObject *object,
guint prop_id,
GValue *value,
GParamSpec *pspec)
{
GAction *action = G_ACTION (object);
switch (prop_id)
{
case PROP_NAME:
g_value_set_string (value, g_simple_action_get_name (action));
break;
case PROP_PARAMETER_TYPE:
g_value_set_boxed (value, g_simple_action_get_parameter_type (action));
break;
case PROP_ENABLED:
g_value_set_boolean (value, g_simple_action_get_enabled (action));
break;
case PROP_STATE_TYPE:
g_value_set_boxed (value, g_simple_action_get_state_type (action));
break;
case PROP_STATE:
g_value_take_variant (value, g_simple_action_get_state (action));
break;
default:
g_assert_not_reached ();
}
}
static void
g_simple_action_finalize (GObject *object)
{
GSimpleAction *simple = G_SIMPLE_ACTION (object);
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
g_free (simple->name);
if (simple->parameter_type)
g_variant_type_free (simple->parameter_type);
if (simple->state)
g_variant_unref (simple->state);
G_OBJECT_CLASS (g_simple_action_parent_class)
->finalize (object);
}
void
g_simple_action_init (GSimpleAction *simple)
{
simple->enabled = TRUE;
}
void
g_simple_action_iface_init (GActionInterface *iface)
{
iface->get_name = g_simple_action_get_name;
iface->get_parameter_type = g_simple_action_get_parameter_type;
iface->get_state_type = g_simple_action_get_state_type;
iface->get_state_hint = g_simple_action_get_state_hint;
iface->get_enabled = g_simple_action_get_enabled;
iface->get_state = g_simple_action_get_state;
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
iface->change_state = g_simple_action_change_state;
iface->activate = g_simple_action_activate;
}
void
g_simple_action_class_init (GSimpleActionClass *class)
{
GObjectClass *object_class = G_OBJECT_CLASS (class);
object_class->set_property = g_simple_action_set_property;
object_class->get_property = g_simple_action_get_property;
object_class->finalize = g_simple_action_finalize;
/**
* GSimpleAction::activate:
* @simple: the #GSimpleAction
* @parameter: (allow-none): the parameter to the activation
*
* Indicates that the action was just activated.
*
* @parameter will always be of the expected type. In the event that
* an incorrect type was given, no signal will be emitted.
*
* Since GLib 2.40, if no handler is connected to this signal then the
* default behaviour for boolean-stated actions with a %NULL parameter
* type is to toggle them via the #GSimpleAction::change-state signal.
* For stateful actions where the state type is equal to the parameter
* type, the default is to forward them directly to
* #GSimpleAction::change-state. This should allow almost all users
* of #GSimpleAction to connect only one handler or the other.
*
* Since: 2.28
*/
g_simple_action_signals[SIGNAL_ACTIVATE] =
g_signal_new (I_("activate"),
G_TYPE_SIMPLE_ACTION,
G_SIGNAL_RUN_LAST | G_SIGNAL_MUST_COLLECT,
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
0, NULL, NULL,
g_cclosure_marshal_VOID__VARIANT,
G_TYPE_NONE, 1,
G_TYPE_VARIANT);
/**
* GSimpleAction::change-state:
* @simple: the #GSimpleAction
* @value: (allow-none): the requested value for the state
*
* Indicates that the action just received a request to change its
* state.
*
* @value will always be of the correct state type. In the event that
* an incorrect type was given, no signal will be emitted.
*
* If no handler is connected to this signal then the default
* behaviour is to call g_simple_action_set_state() to set the state
* to the requested value. If you connect a signal handler then no
* default action is taken. If the state should change then you must
* call g_simple_action_set_state() from the handler.
*
* <example>
* <title>Example 'change-state' handler</title>
* <programlisting>
* static void
* change_volume_state (GSimpleAction *action,
* GVariant *value,
* gpointer user_data)
* {
* gint requested;
*
* requested = g_variant_get_int32 (value);
*
* // Volume only goes from 0 to 10
* if (0 <= requested && requested <= 10)
* g_simple_action_set_state (action, value);
* }
* </programlisting>
* </example>
*
* The handler need not set the state to the requested value. It
* could set it to any value at all, or take some other action.
*
* Since: 2.30
*/
g_simple_action_signals[SIGNAL_CHANGE_STATE] =
g_signal_new (I_("change-state"),
G_TYPE_SIMPLE_ACTION,
G_SIGNAL_RUN_LAST | G_SIGNAL_MUST_COLLECT,
0, NULL, NULL,
g_cclosure_marshal_VOID__VARIANT,
G_TYPE_NONE, 1,
G_TYPE_VARIANT);
/**
* GSimpleAction:name:
*
* The name of the action. This is mostly meaningful for identifying
* the action once it has been added to a #GSimpleActionGroup.
*
* Since: 2.28
**/
g_object_class_install_property (object_class, PROP_NAME,
g_param_spec_string ("name",
P_("Action Name"),
P_("The name used to invoke the action"),
NULL,
G_PARAM_READWRITE |
G_PARAM_CONSTRUCT_ONLY |
G_PARAM_STATIC_STRINGS));
/**
* GSimpleAction:parameter-type:
*
* The type of the parameter that must be given when activating the
* action.
*
* Since: 2.28
**/
g_object_class_install_property (object_class, PROP_PARAMETER_TYPE,
g_param_spec_boxed ("parameter-type",
P_("Parameter Type"),
P_("The type of GVariant passed to activate()"),
G_TYPE_VARIANT_TYPE,
G_PARAM_READWRITE |
G_PARAM_CONSTRUCT_ONLY |
G_PARAM_STATIC_STRINGS));
/**
* GSimpleAction:enabled:
*
* If @action is currently enabled.
*
* If the action is disabled then calls to g_action_activate() and
* g_action_change_state() have no effect.
*
* Since: 2.28
**/
g_object_class_install_property (object_class, PROP_ENABLED,
g_param_spec_boolean ("enabled",
P_("Enabled"),
P_("If the action can be activated"),
TRUE,
G_PARAM_READWRITE |
G_PARAM_STATIC_STRINGS));
/**
* GSimpleAction:state-type:
*
* The #GVariantType of the state that the action has, or %NULL if the
* action is stateless.
*
* Since: 2.28
**/
g_object_class_install_property (object_class, PROP_STATE_TYPE,
g_param_spec_boxed ("state-type",
P_("State Type"),
P_("The type of the state kept by the action"),
G_TYPE_VARIANT_TYPE,
G_PARAM_READABLE |
G_PARAM_STATIC_STRINGS));
/**
* GSimpleAction:state:
*
* The state of the action, or %NULL if the action is stateless.
*
* Since: 2.28
**/
g_object_class_install_property (object_class, PROP_STATE,
g_param_spec_variant ("state",
P_("State"),
P_("The state the action is in"),
G_VARIANT_TYPE_ANY,
NULL,
G_PARAM_READWRITE | G_PARAM_CONSTRUCT |
G_PARAM_STATIC_STRINGS));
}
/**
* g_simple_action_set_enabled:
* @simple: a #GSimpleAction
* @enabled: whether the action is enabled
*
* Sets the action as enabled or not.
*
* An action must be enabled in order to be activated or in order to
* have its state changed from outside callers.
*
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
* This should only be called by the implementor of the action. Users
* of the action should not attempt to modify its enabled flag.
*
* Since: 2.28
**/
void
g_simple_action_set_enabled (GSimpleAction *simple,
gboolean enabled)
{
g_return_if_fail (G_IS_SIMPLE_ACTION (simple));
enabled = !!enabled;
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
if (simple->enabled != enabled)
{
Make 4 incompatible changes to the GAction API This commit represents an API break to GAction in the following ways: - the 'set_state' entry in the GActionInterface vtable has been renamed to 'change_state'. The number and order of vtable items has not otherwise changed. - g_action_set_state() has been renamed to g_action_change_state() to match the updated vtable entry. - the "state" property of the GAction interface has been changed to read-only to reflect the fact that g_action_set_state() no longer exists. - GSimpleActionClass has been hidden. GSimpleAction can no longer be subclassed. >> Rationale g_action_set_state() has never been a true setter in the sense that calling it will update the value of the "state" property. It has always been closer to "request 'state' to be changed to this value" with semantics defined by the implementor of the interface. This is why the equivalent method in GActionGroup had its name changed from 'set' to 'change'. This change makes the two interfaces more consistent and removes any implication about the effect that calling set_state() should have on the 'state' property. >> Impact This incompatible API break was undertaken only because I strongly suspect that it will go entirely unnoticed. If the break actually affects anybody, then we will accommodate them (possibly going as far as to revert this commit entirely). The virtual table change only impacts implementors of GAction. I strongly suspect that this is nobody (except for GSimpleAction). The hiding of GSimpleActionClass only impacts impacts subclasses of GSimpleAction. I strongly suspect that none of these exist. The changing of the property to be read-only only affects people who were trying to change the state by using GObject properties. I strongly suspect that this is nobody at all. The removal of the g_action_set_state() call is the most dangerous, but I still suspect that it will impact nobody outside of GLib. If anybody is impacted by this change then, at their request, I will reintroduce the API as a deprecated alias for g_action_change_state().
2011-06-29 11:11:59 +02:00
simple->enabled = enabled;
g_object_notify (G_OBJECT (simple), "enabled");
}
}
/**
* g_simple_action_new:
* @name: the name of the action
* @parameter_type: (allow-none): the type of parameter to the activate function
*
* Creates a new action.
*
* The created action is stateless. See g_simple_action_new_stateful().
*
* Returns: a new #GSimpleAction
*
* Since: 2.28
**/
GSimpleAction *
g_simple_action_new (const gchar *name,
const GVariantType *parameter_type)
{
return g_object_new (G_TYPE_SIMPLE_ACTION,
"name", name,
"parameter-type", parameter_type,
NULL);
}
/**
* g_simple_action_new_stateful:
* @name: the name of the action
* @parameter_type: (allow-none): the type of the parameter to the activate function
* @state: the initial state of the action
*
* Creates a new stateful action.
*
* @state is the initial state of the action. All future state values
* must have the same #GVariantType as the initial state.
*
* If the @state GVariant is floating, it is consumed.
*
* Returns: a new #GSimpleAction
*
* Since: 2.28
**/
GSimpleAction *
g_simple_action_new_stateful (const gchar *name,
const GVariantType *parameter_type,
GVariant *state)
{
return g_object_new (G_TYPE_SIMPLE_ACTION,
"name", name,
"parameter-type", parameter_type,
"state", state,
NULL);
}