This was highlighted (but not introduced) by
0144feb41f. Previously the test coverage
didn’t cover this branch, I think.
`iter` was leaked, and at this point `parameter` had never been set, so
clearing it was unnecessary.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3349
GDBusConnection sends each signal to recipients in a separate idle
callback, and there's no particular guarantee about the order in which
they're scheduled or dispatched. For the NameOwnerChanged signal that
reports the name becoming unowned, it's possible that g_bus_watch_name()
gets its idle callback called before the GDBusProxy:g-name-owner
machinery has updated the name owner, in which case the assertion
will fail.
Fixing GNOME/glib#3268 introduced a new subscription to NameOwnerChanged
which can alter the order of delivery, particularly in the case where
G_DBUS_PROXY_FLAGS_NO_MATCH_RULE was used (as tested in
/gdbus/proxy/no-match-rule). The resulting test failure is intermittent,
but reliably appears within 100 repetitions of that test.
Fixes: 511c5f5b "tests: Wait for gdbus-testserver to die when killing it"
Signed-off-by: Simon McVittie <smcv@debian.org>
Some architecture such as sparc and some flavors of arm needs -latomic
to avoid the following build failure:
gthread-posix.c:(.text+0xda8): undefined reference to `__atomic_compare_exchange_4'
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
If the file to be added is on a read-only filesystem, opening read/write
will fail with EROFS. In this case we should fall back to opening it
read-only, the same way we already do if write access is forbidden by
DAC or MAC.
An easy way to reproduce this test failure is to build and test GLib
in a podman container, with its source code read-only and its build
directory read/write:
podman run --rm -it \
-v $(pwd):$(pwd):ro \
-v $(pwd)/_build:$(pwd)/_build:rw \
-w $(pwd) ...
Before this commit, the dbus-appinfo test would fail, because opening
${srcdir}/gio/tests/org.gtk.test.dbusappinfo.flatpak.desktop read/write
would fail with EROFS.
For completeness, give similar handling to the other error codes
documented in Linux open(2) that might succeed if re-attempted using
read-only access: according to that documentation, we could get EPERM
if opening read/write is prevented by fcntl F_ADD_SEALS, or ETXTBSY
if the file is an executable that is currently being run.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This was a bug that existed during development of this branch; make sure
it doesn't come back.
This test fails with a use-after-free and crash if we comment out the
part of name_watcher_unref_watched_name() that removes the name watcher
from `map_method_serial_to_name_watcher`.
It would also fail with an assertion failure if we asserted in
name_watcher_unref_watched_name() that get_name_owner_serial == 0
(i.e. that GetNameOwner is not in-flight at destruction).
Signed-off-by: Simon McVittie <smcv@collabora.com>
The vulnerability reported as GNOME/glib#3268 can be characterized
as: these signals from an attacker should not be delivered to either
the GDBusConnection or the GDBusProxy, but in fact they are (in at
least some scenarios).
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268
Signed-off-by: Simon McVittie <smcv@collabora.com>
The expected result is that because TEST_CONN_SERVICE owns
ALREADY_OWNED_NAME but not (yet) OWNED_LATER_NAME, the signal will be
delivered to the subscriber for the former but not the latter.
Before #3268 was fixed, it was incorrectly delivered to both.
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268 (partially)
Signed-off-by: Simon McVittie <smcv@collabora.com>
Otherwise a malicious connection on a shared bus, especially the system
bus, could trick GDBus clients into processing signals sent by the
malicious connection as though they had come from the real owner of a
well-known service name.
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/3268
Signed-off-by: Simon McVittie <smcv@collabora.com>
We will use this in a subsequent commit to prevent signals from an
impostor from being delivered to a subscriber.
To avoid message reordering leading to misleading situations, this does
not use the existing mechanism for watching bus name ownership, which
delivers the ownership changes to other main-contexts. Instead, it all
happens on the single thread used by the GDBusWorker, so the order in
which messages are received is the order in which they are processed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
If a connection has two signal subscriptions active for the same signal,
one with arg0 matching and one without, a signal which doesn’t contain
an arg0 value (i.e. `g_dbus_message_get_arg0()` returns `NULL`) will
cause `NULL` to be passed to `strcmp()` when checking for a match
against the signal subscription which *has* arg0 matching, causing a
crash.
Fix that by adding the obvious `NULL` check, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3342
D-Bus Activation allows passing an array of parameters. Allow apps to
export actions that accept tuples to match the number of elements in the
parameters so the full potential of the D-Bus interface can be used.
Closes: https://gitlab.gnome.org/GNOME/glib/-/issues/3333
This fixes commit 057f0fcbfb. I didn’t
notice that `tmp` is an array of strings, not an array of chars, and
somehow my compiler didn’t warn. Seems only the macOS CI job is spotting
the problem here.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Rather than returning through `G_VARIANT_TYPE`, which scan-build doesn’t
seem to fully understand ownership transfers through, just return `new`
directly, and do the `is_valid()` check separately.
The new code is equivalent to the old code, but squashes a scan-build
false positive around leaking `dest`. (See also: the previous commit.)
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
This introduces no functional changes. Switch from incrementing a
pointer to incrementing a counter and using array indexing.
This squashes a scan-build false positive, where it can’t choose which
of `dest` and `new` ‘own’ the newly allocated memory, so it kind of
assumes both do, and then warns there’s a potential leak of `dest` when
the function returns. In actual fact, ownership of the memory is
returned via `new`.
Partly this might be masked through use of the `G_VARIANT_TYPE` macro,
which the following commit will address.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
Otherwise scan-build thinks there could be `NULL` pointer dereference of
the `tz`. (There can’t be, it’s a false positive. 🤫)
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks there’s a potential `NULL` pointer dereference of some
of the members of `msg->strings`, because it doesn’t know about the
implicit invariant that the length of `msg->strings` is
`msg->n_strings`.
Ideally we want an assertion like `g_assert (g_strv_length
(msg->strings) == msg->n_strings)`, but that’s not very performant, so
just settle for a non-`NULL` assertion on each loop iteration to give
scan-build the hint it needs.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
This helps out scan-build, which otherwise thinks there could be a
`NULL` pointer dereference.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks that `tmp` can be dereferenced before it’s all been
assigned to. I don’t think that’s the case, because the number of
elements in it which have been assigned to is tracked as `i`. But static
analysers find that kind of state tracking hard to reason about, so
let’s just zero-initialise the array to simplify things.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
It’s very obviously a false positive, as `str` has been added to on the
previous line, so can’t be `(void *) 0`. Not sure what scan-build is
thinking.
I’d rather not have this assertion (it doesn’t help the programmer’s
understanding of the code), but I would also rather have scan-build
running with no warnings so that it can helpfully catch newly-introduced
errors in future.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
See the code comment. scan-build can’t handle analysis over the
refcounts, so consistently complains about potential use-after-free
errors in the code, essentially because:
* It understands `name_unref()`, but completely ignores `name_ref()`
* The code often calls `name_unref()` on the ‘wrong’ pointer, in the
sense that it knows that if another struct exists, that struct holds
a ref on a `Name`, but without actually having a pointer to the
`Name`. So the code calls `name_unref (name); name_unref (name)`.
That’s valid, but quite understandably looks like a recipe for a
use-after-free.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks that there can be a `NULL` pointer dereference of
`error` here because it doesn’t understand that the function return
value and `GError` are related: when a valid return value is returned,
the error is `NULL` and vice-versa.
Try and make that clearer to the static analyser by checking whether the
error is `NULL`, rather than the return value.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks there could be a `NULL` pointer dereference of
`t->data` here. It’s wrong, so add an assertion to try and help it
understand the control flow.
The loop is exited as soon as a target is found whose weight is greater
than or equal to a random value between 0 and the sum of all the weights
in the set of remaining targets in the loop. By definition, the last
target in the loop always satisfies this condition, so a target will
always be chosen, and hence `t` will never be `NULL` within the loop.
`t->data` will never be `NULL` by construction of the target list.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks that `data` could be leaked. It’s not, though; it’s
passed as the `user_data` to `g_dbus_connection_register_object()` along
with its free function.
Try and persuade scan-build that there’s no leak by annotating the
transfer.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
This just makes it a bit clearer that they’re atomic/for thread safety,
and not just NIHed bit operations with shouty names.
This introduces no functional changes.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
This avoids the need to ref/unref the closure while invalidating it in
the `closure->ref_count == 1` path in `g_closure_unref()`.
scan-build gets very confused about the ref count here, and ends up
assuming it’s possible for the `g_closure_unref()` call in
`g_closure_invalidate()` to finalise the closure when the latter is
called from `g_closure_unref()`. There was an existing assertion in
`g_closure_invalidate()` which hinted that this wasn’t possible, but
scan-build doesn’t seem to be able to propagate assumptions about
refcounts between function contexts.
So, introduce an internal variant of `g_closure_invalidate()` which can
skip modifying the closure’s refcount. It’s safe to invalidate the
closure without adding a ref when doing so from `g_closure_unref()` with
`closure->ref_count == 1` because at that point `g_closure_unref()`
holds the only remaining ref to the closure. So none of the invalidation
callbacks are allowed to unref it further.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build was complaining that `dest_hostname` and `dest_protocol` were
used after being freed, which could potentially happen if the code is
built with `G_DISABLE_CHECKS`. This is a false positive, because the
state of types in the program should be the same regardless of whether
`G_DISABLE_CHECKS` is used.
However, the code did smell. If we are trying to free things and return
gracefully if the underlying socket address enumerator returns something
of the wrong type, why not free the rest of the function’s state, or
skip the invalid address and move on to the next one? Or if we are trying
to make an assertion, why bother freeing some temporary data at all?
This halfway house doesn’t make sense.
So turn the `g_return_val_if_fail()` into a full assertion.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build was complaining that the `wc_buffer[old_n_wc]` in `cc =
COMBINING_CLASS (wc_buffer[old_n_wc])` could dereference memory off the
end of the initialised `wc_buffer` array. It came to this conclusion by
assuming that the result of `find_decomposition()` for one of the
`gunichar`s was a non-`NULL` empty string, so that iteration of the
decomposition loop didn’t append anything to `wc_buffer`.
I don’t think it’s possible for an iteration of the loop to *not* append
anything to `wc_buffer`. Unicode characters don’t decompose to nothing.
Indeed, the current code coverage for GLib says that the `if (n_wc > 0)`
branch is always taken, and at that point in the control flow, `n_wc <=
0` is never true.
So, add an assertion to check that progress is made (i.e. `n_wc` is
incremented by at least 1), and remove the unnecessary condition.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build is worried that `node->data->common.value_table->value_init`
will be a `NULL` pointer dereference in the assignment to
`node->mutatable_check_cache`.
There’s already an assertion immediately below to check against this, so
let’s move it up a line to help the static analyser out.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
Avoid scan-build thinking that `new_wrdata` could be `NULL` on this
control path. It can’t be `NULL` if `new_object` is set.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks that `gvs_variable_sized_array_is_normal()` can do a
`NULL` pointer dereference on `value.data` when `value.size == 0`. This
isn’t possible, because `offsets.length == 0` always when `value.size ==
0`, but that’s a bit of a complex relationship which the static analyser
can’t work out.
Give it some help by adding an assertion.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
After a lot of loop unwinding, during which I think it might have lost
its knowledge that `cache->buffer != NULL` (from a prior check on line
765), scan-build seems to think that there can be a `NULL` pointer
dereference of `cache->buffer` within `cache_magic_compare_to_data()`.
There can’t be. Add an assertion to try and help the analyser.
Upstreamed as
https://gitlab.freedesktop.org/xdg/xdgmime/-/merge_requests/38.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
