Move a method from GNotificationBackend into the fdo backend (since it
was only used from here). Remove the accessors for the already-public
(in private header) ->dbus_connect and ->application on
GNotificationBackend.
https://bugzilla.gnome.org/show_bug.cgi?id=688492
g_buffered_input_stream_finalize() is already declared as static in this
gbufferedinputstream.c file, so just remove the redundant declaration.
Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
https://bugzilla.gnome.org/show_bug.cgi?id=710345
Replaced several usages of GError with g_return_val_if_fail() for
developer-only messages. As additional value, it also removes those
messages from the list to translate, simplifying translator's work a
bit.
https://bugzilla.gnome.org/show_bug.cgi?id=569017
Over many years of writing code interacting with subprocesses, a pattern
that comes up a lot is to run a child and get its output as UTF-8, to
put inside a JSON document or render in a GtkTextBuffer, etc.
It's very important to validate at the boundaries, and not say deep
inside Pango.
We could do this a bit more efficiently if done in a streaming fashion,
but realistically this should be OK for now.
We weren't closing the streams after we were done reading or writing,
which is kind of essential. The easy way to fix this is to just use
g_output_stream_splice() to a GMemoryOutputStream rather than
hand-rolling it. This results in a substantial reduction of code
complexity.
A second serious issue is that we were marking the task as complete when
the process exits, but that's racy - there could still be data to read
from stdout. Fix this by just refcounting outstanding operations.
This code, not surprisingly, looks a lot like the "multi" test.
Next, because processes output binary data, I'd be forced to annotate
the char*/length pairs as (array) (element-type uint8). But rather than
doing that, it's *far* simpler to just use GBytes.
We need a version of this that actually validates as UTF-8, that will be
in the next patch.
There are a number of nice things this class brings:
0) Has a race-free termination API on all platforms (on UNIX, calls to
kill() and waitpid() are coordinated as not to cause problems).
1) Operates in terms of G{Input,Output}Stream, not file descriptors
2) Standard GIO-style async API for wait() with cancellation
3) Makes some simple cases easy, like synchronously spawning a
process with an argument list
4) Makes hard cases possible, like asynchronously running a process
with stdout/stderr merged, output directly to a file path
Much rewriting and code review from Ryan Lortie <desrt@desrt.ca>
https://bugzilla.gnome.org/show_bug.cgi?id=672102
This is essentially a commandline implementation of the client-side of
the org.freedesktop.Application D-Bus interface.
It includes support for tab-completion based on desktop files and their
contents.
https://bugzilla.gnome.org/show_bug.cgi?id=704218
The GApplicationCommandLine DBus implementation currently calls
g_dbus_method_invocation_return_value() in its finalize() implementation
only, relying on the object being destroyed after g_object_unref() is
called on it inside g_application_impl_method_call().
While this is usually fine for C applications, when overriding the
command_line vfunc from language bindings, the binding might add extra
references to the object, which might not be released immediately - e.g.
because they're garbage collected, or possibly even leaked. The same
scenario could happen in a C application that decides to keep a
reference to the passed-in GApplicationCommandLine object.
To ensure the CommandLine DBus method always gets a reply after the
invocation of command_line in the primary instance, explicitly send the
message back before dropping our reference to the object.
https://bugzilla.gnome.org/show_bug.cgi?id=708042
It's not difficult to do; not all backends implement it, and for some
it may be difficult to implement query_info_on_read(), so let's just
do both.
https://bugzilla.gnome.org/show_bug.cgi?id=706254
Since it could confuse callers (admittedly who are already violating
a precondition).
Just spotted while adapting some bits of this code for a ssh library.
This commit factors out a function for comparing string suffixes, and at
the same time makes it safe for mime types that are shorter than the
"/*" suffix.
==25418== Invalid read of size 1
==25418== at 0x3C6D0F9D22: __gio_xdg_cache_mime_type_subclass (xdgmimecache.c:848)
==25418== by 0x3C6D09ED8C: g_content_type_is_a (gcontenttype.c:158)
==25418== by 0x34D8031E95: gtk_recent_filter_filter (gtkrecentfilter.c:733)
==25418== by 0x34D802F167: _gtk_recent_chooser_get_items (gtkrecentchooserutils.c:387)
==25418== by 0x34D802D07F: idle_populate_func (gtkrecentchoosermenu.c:1011)
==25418== by 0x34D7A20477: gdk_threads_dispatch (gdk.c:804)
==25418== by 0x3C6C0492F5: g_main_context_dispatch (gmain.c:3065)
==25418== by 0x3C6C049677: g_main_context_iterate.isra.23 (gmain.c:3712)
==25418== by 0x3C6C04972B: g_main_context_iteration (gmain.c:3773)
==25418== by 0x34D7FC2AF4: gtk_main_iteration (gtkmain.c:1262)
==25418== by 0x408EB4: main (in /usr/bin/glade)
https://bugzilla.gnome.org/show_bug.cgi?id=708529
Rather than having lots of obscure platform-based #ifdefs all over
gio, define some macros in gcredentialsprivate.h, and use those to
simplify the rest of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=701482
Sometimes the application doesn't want to autostart a service
when it creates a proxy, but wants the service autostarted when
it makes the first method call. Allow that behavior with a new
flag.
https://bugzilla.gnome.org/show_bug.cgi?id=708828
Fix up a lot of whitespace issues in this file since we're about to do
some pretty serious rewriting here anyway...
Add some fold markers while we're at it.
Change the search path to be a global array of 'DesktopFileDir' structures and
change the 'get' function to an 'ensure' function.
This is just a straight-up refactor. Future patches will expand the
DesktopFileDir structure.
Add a convenient and race-free method of watching local files from the
GLib worker thread.
Without this, the race-free way to create a monitor that dispatches
events to the worker thread looked something like this:
- dispatch an idle to the worker thread
- from the idle, create the monitor and connect signals
- from the original thread, wait (on a cond?) until the worker thread
has finished setting up the monitor
- read the file that you were monitoring
which is just ridiculously complicated...
To use the new API:
monitor = g_local_file_monitor_new_in_worker ("/path/to/some/file",
G_FILE_MONITOR_NONE,
&error);
g_assert_no_error (error);
g_signal_connect (monitor, "changed", G_CALLBACK (callback), NULL);
g_local_file_monitor_start (monitor);
'callback' will run from the GLib worker thread.
This is the reason that the start() call was introduced in the previous
commit. The backends that don't use the start() call will have a very
thin race between creating the monitor and connecting the signal, but
hopefully they will be fixed soon.
These new APIs will be used (at least) from gdesktopappinfo to watch for
changes in the desktop file directories.
https://bugzilla.gnome.org/show_bug.cgi?id=704887
and start using the new start() vcall on the local monitor classes.
I only port inotify because I am uncomfortable making changes to the
other monitor backends without having a way of testing them.
https://bugzilla.gnome.org/show_bug.cgi?id=704887
Stop abusing constructor() to do startup work, adding _start() calls
instead.
The backends themselves still use constructor() although a patch will be
following to also fix inotify.
The reason for using a separate start() call instead of constructed()
will become apparent in future commits.
https://bugzilla.gnome.org/show_bug.cgi?id=704887
During initialisation of a directory monitor with the
G_FILE_MONITOR_WATCH_MOUNTS flag set, GLocalDirectory monitor will add a
UNIX mount watch in case the file notification backend doesn't support
reporting these events for itself.
Unfortunately, it was performing the check incorrectly, resulting in a
monitor always being added.
Fix that, and add the #define for G_LOCAL_DIRECTORY_MONITOR_GET_CLASS()
that was also missing (since the fix depends on it).
https://bugzilla.gnome.org/show_bug.cgi?id=704882
Matthew Barnes noted this on IRC a few days ago. I just had this file
open for other reasons and decided to tweak the docs to make this trap
more clear.
https://bugzilla.gnome.org/show_bug.cgi?id=709301
Don't return children with invalid schemas from
g_settings_list_children() (ie: missing schemas or mismatched paths).
This prevents gsettings list-recursively from crashing when broken
schemas are installed on the system.
https://bugzilla.gnome.org/show_bug.cgi?id=705688
There are some corner cases where using the sync version of read/write
in a thread could cause thread-safety issues. In these cases it's
possible to override the output stream's splice_async() function,
but for input streams one would need to do some acrobatics to
stay thread-safe. Alternatively, some implementations may not even
override their sync read/write functions.
This patch refactors the default splice_async() implementation to
call the sync read and write functions in a thread only when both
async versions are thread-based. When one or both are non-threaded,
it calls the virtual write_async() and read_async() functions of the
involved streams within the same thread.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Refactor g_output_stream_close_async() into itself and an internal
variant for potential use inside other operations (splice_async).
The internal version must be called between
g_output_stream_set_pending() and g_output_stream_clear_pending().
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Previously, no testcases tested the close flags of
g_output_stream_splice_async. This patch adds tests for that and
also tests various combinations of threaded and non-threaded
GInputStream async reads and GOutputStream async writes.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
In implementing a better g_output_stream_splice_async() and possibly
other situtations it's helpful to know whether the output stream's
write function internally uses threads. If it and the input stream's
read async functions use threads, then the splice function could
spawn a single thread for better efficiency.
This patch adds a function to determine whether an output stream's
g_output_stream_write_async() function internally uses threads.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
In implementing a better g_output_stream_splice_async() and possibly
other situtations it's helpful to know whether the input stream's
read function internally uses threads. If it and the output stream's
write async functions use threads, then the splice function could
spawn a single thread for better efficiency.
This patch adds a function to determine whether an input stream's
g_input_stream_read_async() function internally uses threads.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Rather than always calling out to g_file_get_path() (which
might block, whatever the documentation might say), postpone
the call until we actually need it.
https://bugzilla.gnome.org/show_bug.cgi?id=708753
g_cancellable_disconnect will wait until any pending "cancelled"
handlers finish. This is useful because disconnecting a handler can have the
side-effect of freeing data that the cancelled handler may rely on.
Unfortunately, the code used to enforce this synchronization between
"cancelled" handlers and g_cancellable_disconnect will also cause
deadlock if the cancelled handler itself calls g_cancellable_disconect.
Obviously, if g_cancellable_disconnect is explicitly called by a "cancelled"
handler, then the "cancelled" handler is shouldering the responsibility
of not using any data that may be freed by disconnection.
Also, g_cancellable_disconnect can be called in unexpected places by
lower layers in the code (for instance as a result of g_source_destroy).
In practice, this means it's easy for deadlocks to inadvertently crop
up when using "cancelled" handlers.
For these reasons, it would be good to fix the deadlock.
This commit prevents the deadlock by allowing foregoing synchronization,
if a pending "cancelled" handler is in the same thread as the
g_cancellabale_disconnnect call.
https://bugzilla.gnome.org/show_bug.cgi?id=705395
In the real_..._async wrapper for GFile.measure_disk_usage, skip the
wrapping of the progress callback in the case that the user gave a NULL
callback to the async function. This is a performance improvement
because the sync version won't have to do continuous sampling of the
clock to issue a call to the wrapper which will then do nothing.
Unfortunately, I made this simplifying assumption when writing the
wrapper, but forgot to actually implement it when making the sync call.
As a result, the wrapper is still called, and invokes the NULL callback,
causing a segfault.
Make sure we pass NULL if the user's callback was NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
Make use of __wgetmainargs() on Windows so that we can get wide char
versions of the argv's that are passed in when this test program is being
invoked. This is necessary as one might enter non-ASCII, such as
CJK characters filenames and/or directories to run the test program
against, so that we can process the name(s) and pass the proper
UTF-8-encoded name(s) of the files/directories that is being tested.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
It turns out that although dirent is available on mingw32 (where the
code was originally tested), it is not usable from MSVC.
Avoid portability problems by just using GDir.
Also, be careful about ensuring that we utf8-format filenames in our
error messages, and leave out the "file://" component since the strings
we're displaying are not URIs (and we don't want to make them URIs since
the extra escaping would reduce legibility).
Thanks to Chun-wei Fan <fanchunwei@src.gnome.org> for portions of this
patch and for reviews.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
Virtaal installs a mime package for various .po-like file formats, one
of which has the extension .txt. This causes GLib to report ".txt"
files still as "text/plain" but no longer with complete certainty.
The result is that asserting !uncertain during the testsuite causes the
test to fail if Virtaal happens to be installed.
Remove this assertion.
On Windows and OS X, FIONREAD on a UDP socket gets the total number of
bytes available, not the number of bytes available in the next packet,
which is the more useful number (and how the function always behaved
on Linux).
On OS X, fix this by using SO_NREAD. On Windows, fix this by doing a
MSG_PEEK recv() into a giant buffer, since there is apparently no
other way to get the information.
https://bugzilla.gnome.org/show_bug.cgi?id=686786
The requested_conditions list access is not threadsafe. When passing
the socket ownership from a GSource callback to another thread, which
also creates a GSocketSource for the socket, it can happen that the
original GSocketSource is finalized at the same time as the new one
is created. This would cause inconsistencies in the requested_conditions
list and can cause assertions or completely undefined behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=705027
The RunDLL command call during get_session_address_dbus_launch() was
expecting _g_win32_run_session_bus@16 and g_win32_run_session_bus
on Win32 and Win64 respectively at least when GLib is compiled with MSVC,
not g_win32_run_session_bus@16, which caused annoying RunDLL error dialogue
boxes to show up during the use of GtkApplication (such as when running
gtk3-demo-application on Windows), prevented GtkApplication items from
being run for more than one time during the lifespan of the program,
and this also interfered with some GTK+ tests, causing them to fail.
Update accordingly to address the issue.
GNetworkAddress was allowing IPv6 scope ids in g_network_address_new()
/ g_network_address_parse(), but not in g_network_address_parse_uri().
Fix that.
Part of https://bugzilla.gnome.org/show_bug.cgi?id=669724
Convert {glib,gobject,gio}/tests to use the automake TAP driver
and test harness instead of gtester. To do so, we add a glib-tap.mk
that provides the same interface as glib.mk, except for the
reporting and coverage testing functionality. Eventually, we may
want to replace glib.mk with it. I've not yet converted the
toplevel tests/ directory, since it mixes gtestutils tests with
other binaries.
https://bugzilla.gnome.org/show_bug.cgi?id=692125
With UDP sockets, g_socket_bind() with allow_reuse=TRUE on Linux
behaved in a way that the documentation didn't suggest, and that
didn't match other OSes. (Specifically, it allowed binding multiple
multicast sockets to the same address.)
Since this behavior is useful, and since allow_reuse didn't have any
other meaning with UDP sockets, update the docs to reflect the Linux
behavior, and make it do the same thing on non-Linux.
https://bugzilla.gnome.org/show_bug.cgi?id=689245
Under C locale, open() in Python 3 sets the file encoding to ASCII.
As expat looks at encoding="..." in XML declaration, gdbus-codegen can
simply open the input file as binary and let expat decode the content.
https://bugzilla.gnome.org/show_bug.cgi?id=696633
When running a task in a thread, GTask may still be internally holding
a ref on the task in that thread even after the callback is called in
the original thread (depending on thread scheduling). Fix the test to
handle that by using a weak notify that signals a GCond, and wait for
that GCond from the main thread. (And add a corresponding check to
test_return_on_cancel().)
https://bugzilla.gnome.org/show_bug.cgi?id=705152
When an icon is requested as symbolic, our generic fallback algorithm
uses fullcolor icons when the specified icon name is not found, treating
the "-symbolic" suffix as another component of the icon name.
Change the algorithm to check beforehand if the icon is symbolic, remove
the suffix if so, and re-add it at the end for all the generated icon
names.
https://bugzilla.gnome.org/show_bug.cgi?id=680926
GFileMonitor takes great care to sample the thread-default main context
at the time that it is created in order that events can be dispatched to
the correct thread when they come in.
The inotify GFileMonitor implementation uses a global file descriptor
shared between all watches. It has to poll this file descriptor from
somewhere so it arbitrarily picks the default main context.
The problem with that is that the user might not be running it.
Let's use the GLib worker thread for this instead. It's guaranteed to
be running if you need it, and this is exactly the sort of problem it
was meant to solve.
https://bugzilla.gnome.org/show_bug.cgi?id=704873
The default GNOME 3.10 login process right now has gdm spawn a session
for the login screen, retaining the X server, but closing the session
bus. Right now in this scenario many GNOME components such as
gnome-settings-daemon attempt to "clean up" on shutdown by releasing
their owned names.
But they're shutting down because the session bus went away, so
releasing the name is pointless, and presently spews an error into the
journal.
This patch avoids that error spew, which helps system administrators
find *real* problems.
https://bugzilla.gnome.org/show_bug.cgi?id=704567
