Slightly unexpectedly, `g_icon_serialize()` doesn’t produce a floating
`GVariant`, it produces one with full ownership and returns that. That’s
not the convention for `GVariant` return values from functions which
build variants, but there’s nothing we can do to change this now as that
would be an API break.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
D-Bus filter functions run in a worker thread. The `gdbus-connection`
test was sharing a `FilterData` struct between the main thread and the
filter function, which was occasionally (on the order of 0.01% of test
runs) causing spurious test failures due to racing on reads/writes of
`num_handled`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #480
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #480
If a username and password are specified by the caller, `GSocks5Proxy`
tells the server that it supports anonymous *and* username/password
authentication, and the server can choose which it prefers.
Otherwise, `GSocks5Proxy` only says that it supports anonymous
authentication. If that’s not acceptable to the server, the code was
previously returning `G_IO_ERROR_PROXY_AUTH_FAILED`. That error code
doesn’t indicate to the caller that authentication might succeed were
they to provide a username and password.
Change the error handling to make that clearer. A fuller solution would
be to expose more of the method negotiation in the `GSocks5Proxy` API,
so that the caller can specify ahead of time which authentication
methods they want to use. That can follow in issue #2059 though.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1988
They were not actually asynchronous, and hence caused blocking in the
main thread. Deleting them means the default implementation of those
vfuncs is used, which runs the sync implementation in a thread — which
is what is wanted here.
Spotted by Benjamin Otte.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #2051
Guard against NULL type being passed to
g_content_type_get_generic_icon_name() just as we protect
g_content_type_get_description(), otherwise it will cause a crash.
See https://gitlab.gnome.org/GNOME/gtk/issues/2482
Distributions will likely want to update GLib before
GObject-Introspection, to avoid circular dependencies.
Signed-off-by: Simon McVittie <smcv@debian.org>
It was checking for the main SOCKS5 version number, rather than the
subnegotiation version number. The username/password authentication
protocol is described in https://tools.ietf.org/html/rfc1929.
Spotted and diagnosed by lovetox.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1986
Clang warns about string+int not appending to the string (to try and
catch newbie mistakes). While this test didn’t expect that to happen, it
was substituting the same constant string in multiple places for no good
reason. Switch to a single static const string, which should also fix
the compiler warning.
We have to define the string length since it’s used in various
stack-allocated array lengths. This is the easiest fix without more
major refactoring of the test to be less 90s.
Also make things a bit more static.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When running under CI, each iteration takes so long that the total test
time is around 200s. If the CI runner is highly loaded, this can tip it
over the timeout of 360s.
Reduce the iteration counts unless running the test thoroughly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
Currently the test waits for 1s before deciding that a refcount has been
leaked. But slow test machines might take longer than that between
scheduling different threads to sort out the refcount, so increase the
timeout.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
Previously, if the `--address` option was passed to `gdbus-tool`, it
would treat the connection as peer to peer. However, almost all the
commands `gdbus-tool` supports require a message bus (introspection,
calling a method with a destination, etc.). Only the `signal` command
would ever work on a peer-to-peer connection (if no `--dest` was
specified).
So change the `--address` option to generally create message bus
connections.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #938
bindfs is part of the setup process, so if it fails (as can happen if
the `fuse` kernel module has not been loaded — not much we can do about
that) then skip the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Add a note to the documentation of
`g_dbus_connection_signal_unsubscribe()`, `g_bus_unwatch_name()` and
`g_bus_unown_name()` warning about the need to continue iterating the
caller’s thread-default `GMainContext` until the
unsubscribe/unwatch/unown operation is complete.
See the previous few commits and #1515 for an idea of the insidious bugs
that can be caused by not iterating the `GMainContext` until
everything’s synchronised.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When testing that signals are delivered to the correct thread, and are
delivered the correct number of times, call `EmitSignal()` on the
`gdbus-testserver` to trigger a signal emission, and listen for that.
Previously, the code listened for `NameOwnerChanged` and connected to
the bus again to trigger emission of that. The problem with that is that
other things happening on the bus (for example, an old
`gdbus-testserver` instance disconnecting) can cause `NameOwnerChanged`
signal emissions. Sometimes, the `gdbus-threading` test was failing the
`signal_count == 1` assertion due to receiving more than one
`NameOwnerChanged` emission.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This is equivalent, but makes the loop exit conditions a little clearer,
since they’re actually in a `while` statement, rather than being a
`g_main_loop_quit()` call in a callback somewhere else in the file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
As with the previous commit, don’t stop iterating the `context` in
`test_delivery_in_thread_func()` until the unsubscription from a signal
is complete, and hence there’s a guarantee that no callbacks are pending
in the `thread_context`.
This commit uses the `GDestroyNotify` for
`g_dbus_connection_signal_subscribe()` as a synchronisation message from
the D-Bus worker thread to the `test_delivery_in_thread_func()` thread
to notify of signal unsubscription.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Previously, the code in `ensure_gdbus_testserver_up()` created a proxy
object and watched its `name-owner` to see when the
`com.example.TestService` name appeared.
This ended up subscribing to three signals (one of them for name
ownership, and two unused for properties of the proxy), and was racy. In
particular, the `name-owner` property could be set before all D-Bus
messages had been processed — it could have been derived from getting
the owner of the name, for example.
This left unprocessed messages hanging around in the `context`, but that
context was never iterated again, which essentially leaked the
references held by those messages. That included a reference to the
`GDBusConnection`.
The first part of the fix is to simplify the code to use
`g_bus_watch_name_on_connection()`, so there’s only one signal
subscription to worry about.
The second part of the fix is to use the `GDestroyNotify` callback for
the watch data to be notified of when all D-Bus traffic has been
processed and the signal unsubscription is complete. At this point, it’s
guaranteed that there are no idle callbacks pending in the
`GMainContext`, since the `GDestroyNotify` callback is the last one
invoked on the `GMainContext`.
Essentially, this commit uses the `GDestroyNotify` callback as a
synchronisation message between the D-Bus worker thread and the thread
calling `ensure_gdbus_testserver_up()`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Iterate the given `context` while waiting, rather than sleeping. This
ensures that if the errant `GDBusConnection` ref is held by some pending
callback in the given `context`, it will actually be released.
Typically `context` is going to be the global default main context.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This introduces no functional changes, but makes the code a little more
explicit about which connection and main context it’s operating on.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
