The "recursive:" kwarg is available in the targeted minimum version of
meson, and is basically required if you want to not emit warnings and
maybe error with --fatal-meson-warnings.
There are two basic solutions to this problem:
- The current default behavior is false, so explicitly opt in to that
value. None of these internal libraries use recursive objects anyway.
- Use link_with to link to the static library directly, rather than the
extracted objects.
Option 2 is what used to be done before commit
62af03bda8, but it only works with meson
>=0.52 and previously had buggy behavior.
Since the minimum version of meson is now 0.52, it is safe to revert
that commit and go back to using link_with, and therefore option 2 is
chosen.
Previously, the code validated that child objects have a path with the
object manager strictly as a prefix. That doesn’t work in the case where
the object manager’s path is `/`. This case is not recommended, but is
supported.
If the object manager’s path is `/`, validate that child objects’ paths
are not equal to it. If they are equal to it, warn the user rather than
emitting a critical warning, since we can’t expect any users who’ve not
been compliant with the spec to instantly rework their D-Bus APIs.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2500
Emit this when we're about to spawn or DBus activate a GAppInfo. This
allows lauchers to keep the appinfo associated with a startup id.
We use a GVariant to allow for future exansion of the supplied data.
When using g_desktop_app_info_launch_uris_as_manager the "launched"
signal allows to map a desktop-startup-id to a GAppInfo. Make this
possible for DBus activation too.
Since we don't have a PID there we pass a 0. Update the signal
description accordingly.
These should be implemented by loadable IO module libraries, but are not
callable in GLib itself.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2498
This is a partial revert of commit
f378352051, as the previous commits have
silenced the AddressSanitizer warnings for `GContentType`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2310
The function pointer casts silence the compiler and allow the code to
build (and even run in the typical case). However, when building with
control flow integrity checks, the runtime (rightfully) complains about
calling a function via a mismatched function pointer type.
In order to make xdgmime properly relocatable so that unit tests can use
it without it reading and modifying the user’s actual xdgmime files, and
without the need to call setenv() (and get tied up with thread safety
problems), add a xdg_mime_set_dirs() method to allow the dirs to be
overridden. They will still default to the values of $XDG_DATA_HOME and
$XDG_DATA_DIRS.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Allocate an empty cache object, check cache objects for being empty
before using them.
Otherwise the code will re-read cache every 5 seconds, as NULL cache
does not trigger the code that stores mtime, which makes the cache
file appear modified/unloaded permanently.
https://bugzilla.gnome.org/show_bug.cgi?id=735696
Since returning exactly one match has special significance, don't
give up matching before we've found at least 2 types. Also, make
sure that we don't return the same mime type more than once.
Bug 541236.
If an `InterfacesRemoved` signal is received for an object which doesn’t
exist in the local map of interfaces, don’t emit a warning.
This seems to happen in the real world (see #2401). Without a trace of
the D-Bus traffic it’s not possible to know exactly what situation is
causing this, but it seems possible that the peer could disappear and
its `notify::name-owner` signal could be processed before its
`InterfacesRemoved` signal, or something similar.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2401
Relax assertion about opened registry key as it may have been removed
in the meantime between enumeration and when opening, or (more likely)
we may not have the required permissions to open the some enumerated
keys (i.e. RegOpenKeyExW fails and returns ERROR_ACCESS_DENIED).
Fixes https://gitlab.com/inkscape/inbox/-/issues/5669
Instead of calling xterm when it clearly does not exist and causes a silent error,
inform the user that the launch failed so they can take the right action.
Also added (transfer full) or (transfer none) annotations while I was at it.
This is the result of checking each `Returns:` line in these files. I’ve
only considered nullability and transferability, and not other (potentially
missing or incorrect) annotations.
Helps: #2227
If the first power-profile installed test fails (for example, because
xdg-desktop-portal isn’t available), correctly tear down the dbusmock
object, or it will cause setUp() to fail when the next test in the suite
is run.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2481
When first creating the monitor, correctly set its property value to the
value from the portal, rather than waiting for the portal value to
change to set it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2481
We were lucky that this worked in some cases (the test is racy), but we
should actually run the condition check each loop, rather than when the
function is called.
Spotted by Martin Pitt:
96a8c02d24 (r54773831)
Let's explain the advantages of relying on GTlsConnection to perform
certificate verification.
Also, document that the issuer property is a little tricky, because the
issuer certificate might not be the certificate that actually gets used
in final certification path building. This is very unexpected to anybody
who is not an expert.
Because TLS certificate verification is extremely complex, the lookup
issuer function may be tempting to misuse even by experienced
developers. There is a notion that the issuer certificate will always be
used in the final certification path, but it's just not always true.
Trying to make security decisions based on the results of this function is
a trap, so let's document that.
It turns out that old versions of glib-networking actually reordered the
certificate chain to match the final verification path. This no longer
happens since a long time ago, because it was a buggy mess. Instead, we
rely on the TLS library to build the final verification path. Their path
building is not very good, but at least it's consistent. The point of
these doc updates is to clarify that only the TLS library can make
security decisions.
Document that HTTP requests may be performed to look up missing
certificates.
Finally, let's document that certificate verification using GTlsDatabase
cannot be as smart as certificate verification performed directly by
GTlsConnection.
g_win32_package_parser_enum_packages() reads beyond the end of a buffer
when doing a memcpy. With app verifier enabled on Windows, it causes
the application to crash on startup.
This change limits the memcpy to the size of the source string.
Fixes: #2454
This reverts commit 7aa0580cc5.
As stated in #2316, that commit was a workaround to allow gnome-keyring
and msmtp to continue to get their session bus address from
`DBUS_SESSION_BUS_ADDRESS`, even though they’re `AT_SECURE`. The timeout
on that workaround has expired so that commit is now being reverted.
Fixes: #2316
You need to separate the first entry in the list from the preceding
paragraph, and you should add a space before the enumerating symbol.
GTK-Doc accepts a very lax Markdown syntax, but any other tool parsing
our documentation will likely fail.
The value should be initialized to NULL before calling
g_win32_registry_key_get_value_w(), to ensure that cleanup
can be done unconditionally afterward.
To ensure that the watch is properly re-set every time, call
watch_keys() from the watch callback. Previously the watch was only
renewed after a data update was done in a worker thread, which made
no sense, since the update function was implemented in such a way
that it can (and should) be re-triggered on each key change, until
the changes stop coming, and that can only happen if we renew
the registry watcher right away.
If a key watch is renewed from the key watch callback, it results
in the callback being NULL, since we clear it after we call it.
Rearrange the function to make sure that the changes done by the
callback function are preserved properly.
This function can, in fact, return STATUS_SUCCESS. We shouldn't
assert that it doesn't.
For now interpret it just like STATUS_PENDING (i.e. APC will be called),
see how it goes (it isn't documented how the function behaves in this
case, we have to play it by ear).
Note that while we *can* use a better-documented RegNotifyChangeKeyValue() here,
it communicates back to us via event objects, which means that the registry
watcher would have to interact with the main loop directly and insert its
events (plural; one event per key) there. That would make the API more complicated.
Whereas the internal NT function communicates by calling an APC - we're good
as long as something somewhere puts the thread in alertable state.
When attempting to test Windows support for building libadwaita, since we are
using multiple GResource files, one would hit linker errors where multiple
definitions of the following symbols have been defined, when
glib-compile-resources was invoked without manual register:
resource_constructor_wrapper
resource_destructor_constructor
_arrayresource_constructor
_arrayresource_destructor
In order to avoid that, just prefix the definitions of resource_constructor
and resource_destructor, like what we do when --manual-register is used, with
what we pass in with --c-name so that we ensure that we do not end up in such
name collisions.
Port all existing calls in GLib to the new API so that they can receive
more detailed error information (although none of them actually make use
of it at the moment).
This also serves to test the new API better through use.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #203
The `g_file_trash` function fails with the `Unable to find or create trash
directory` error when the global `.Trash` directory exists. This is because
the commit 7f2af262 introduced the `gboolean success` variable to signalize
the detection of the trash folder, but didn't set it in all code branches.
Since for a time this variable was not initialized the bug wasn't visible
when the trash folder existed. The bug became effective after the `success`
variable was initialized with `FALSE` by the commit c983ded0. Let's explicitly
set the `success` variable in all branches to fix the global trash dir
detection.
Fixes: https://gitlab.gnome.org/GNOME/glib/-/issues/2439
The function which calls `SetFileTime()` works with seconds and
nanosecond, but the functions which call it are doing so with seconds
and microseconds.
Fix them so they convert to nanoseconds first.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The code appears to be dealing with time in units of 100ns, not 100µs,
so name the variable accordingly.
The rest of the arithmetic in that function appears consistent and
correct.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The modification time test creates a file, gets the modification time in
seconds, then gets the modification time in microseconds and assumes
that the difference between the two has to be above 0.
As rare as this may be, it can happen:
$ stat g-file-info-test-50A450 -c %y
2021-07-06 18:24:56.000000767 +0100
Change the test to simply assert that the difference not negative to
handle this case.
This is necessary when building glib with icecc. Icecc splits the build
process into two parts. The file is locally preprocessed with
-fdirectives-only to resolve any includes. This adds linemarkers to the
intermediate file. Without the new-line at the end of the file this:
#include "gconstructor_as_data.h"
#include "glib/glib-private.h"
Is turned into this:
const char gconstructor_code[] = "...";# 1 "glib/glib-private.h"
...
The result is a compile error:
In file included from ../glib/gio/glib-compile-resources.c:45:
gio/gconstructor_as_data.h:1: error: stray '#' in program
gio/gconstructor_as_data.h:1: error: expected identifier or '(' before numeric constant
In file included from ../glib/glib/glib-private.h:22,
from gio/gconstructor_as_data.h:2,
from ../glib/gio/glib-compile-resources.c:45:
../glib/glib/gwakeup.h:27:1: error: unknown type name 'GWakeup'
../glib/glib/gwakeup.h:28:42: error: unknown type name 'GWakeup'
../glib/glib/gwakeup.h:30:42: error: unknown type name 'GWakeup'
../glib/glib/gwakeup.h:32:42: error: unknown type name 'GWakeup'
../glib/glib/gwakeup.h:33:42: error: unknown type name 'GWakeup'
In file included from gio/gconstructor_as_data.h:2,
from ../glib/gio/glib-compile-resources.c:45:
../glib/glib/glib-private.h:98:3: error: unknown type name 'GWakeup'
../glib/glib/glib-private.h:99:58: error: unknown type name 'GWakeup'
../glib/glib/glib-private.h💯58: error: unknown type name 'GWakeup'
../glib/glib/glib-private.h:102:58: error: unknown type name 'GWakeup'
../glib/glib/glib-private.h:103:58: error: unknown type name 'GWakeup'
In file included from gio/gconstructor_as_data.h:2,
from ../glib/gio/glib-compile-resources.c:45:
../glib/glib/glib-private.h:164:53: warning: file "../glib/gio/glib-compile-resources.c" linemarker ignored due to incorrect nesting
To avoid this, generate gconstructor_as_data.h with a new-line at the end
of the file.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
This helps to void deadlocks when two processes call interfaces on each
other one of them being org.freedesktop.DBus.ObjectManager.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
The current code is unsafe to use from multiple threads at once.
GIOStream functions like this are supposed to be semi-threadsafe. It's
allowed for them to be called on both a reader thread and a writer
thread at the same time. Of course, it's still tricky and dangerous,
because it's only *really* threadsafe if the handshake has finished,
and API users have no plausible way to know that because the API
does not require performing an explicit handshake operation. But that's
a glib-networking problem. We can at least avoid the most obvious
threadsafety issue here in the API layer.
Note that we'll need to implement the new vfunc in glib-networking for
this to actually work.
Fixes#2393
The documentation for `g_bus_watch_name()` implies that the
`GDestroyNotify` for the user data will be called in the current thread
default `GMainContext`. Currently, it could be called in any thread, as
`client_unref()` can be called in any thread.
Fix that by deferring it to an idle source if `client_unref()` finalises
the `Client` object in a different thread.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
These were missing from the test before the previous commit ported from
`GMainLoop` to `GMainContext`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It makes combination exit conditions a lot easier than when using
`g_main_loop_quit()` from different callbacks.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The first sentence incorrectly said that it checked the type of the
value, and then the second sentence explicitly said it was a programmer
error to give a value of the wrong type.
According to the code, the second sentence is correct.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2425
WebKit wants these private key properties to be readable in order to
implement a deserialization function. Currently they are read-only
because at the time GTlsCertificate was originally designed, the plan
was to support PKCS#11-backed private keys: private keys that are stored
on a smartcard, where the private key is completely unreadable. The
design goal was to support both memory-backed and smartcard-backed
private keys with the same GTlsCertificate API, abstracting away the
implementation differences such that code using GTlsCertificate doesn't
need to know the difference.
The original PKCS#11 implementation was never fully baked and at some
point in the past I deleted it all. It has since been replaced with a
new implementation, including a GTlsCertificate:private-key-pkcs11-uri
property, which is readable. So our current API already exposes the
differences between normal private keys and PKCS#11-backed private keys.
The point of making the private-key and private-key-pem properties
write-only was to avoid exposing this difference.
Do we have to make this API function readable? No, because WebKit could
be just as well served if we were to expose serialize and deserialize
functions instead. But WebKit needs to support serializing and
deserializing the non-private portion of GTlsCertificate with older
versions of GLib anyway, so we can do whatever is nicest for GLib. And I
think making this property readable is nicest, since the original design
reason for it to not be readable is now obsolete. The disadvantage to
this approach is that it's now possible for an application to read the
private-key or private-key-pem property, receive NULL, and think "this
certificate must not have a private key," which would be incorrect if
the private-key-pkcs11-uri property is set. That seems like a minor
risk, but it should be documented.
On Unix platforms, wait() and friends yield an integer that encodes
how the process exited. Confusingly, this is usually not the same as
the integer passed to exit() or returned from main(): conceptually it's
an integer encoding of this tagged union:
enum { EXITED, SIGNALLED, ... } tag;
union {
int exit_status; /* if EXITED */
struct {
int terminating_signal;
bool core_dumped;
} terminating_signal; /* if SIGNALLED */
...
} detail;
Meanwhile, on Windows, wait statuses and exit statuses are
interchangeable.
I find that it's clearer what is going on if we are consistent about
referring to the result of wait() as a "wait status", and the value
passed to exit() as an "exit status".
GSubprocess already gets this right: g_subprocess_get_status() returns
the wait status, while g_subprocess_get_exit_status() genuinely returns
the exit status. However, the GSpawn family of APIs has tended to
conflate the two.
Confusingly, g_spawn_check_exit_status() has always checked a wait
status, and it would not be correct to pass an exit status to it; so
let's deprecate it in favour of g_spawn_check_wait_status(), which
does the same thing that g_spawn_check_exit_status() always did.
Code that needs backwards-compatibility with older GLib can use:
#if !GLIB_CHECK_VERSION(2, 69, 0)
#define g_spawn_check_wait_status(x) (g_spawn_check_exit_status (x))
#endif
Signed-off-by: Simon McVittie <smcv@collabora.com>
Confusingly, g_spawn_check_exit_status() takes a wait status, not an
exit status, so passing g_subprocess_get_exit_status() to it is
incorrect (although both encodings happen to use 0 to encode success
and a nonzero value to encode failure, so in practice this probably
had the desired effect).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Following on from the previous commit, some explicit
`g_main_context_wakeup()` calls were missing from the test code which
only uses `GMainContext`.
Add them, and also add some assertions to check that these functions are
being called in the expected thread (as the code comments say).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The tests in `gdbus-names.c` use a mixture of `GMainLoop` and iterating
a `GMainContext` directly. Some of the helper functions based around the
`OwnNameData` struct use the `loop` `GMainLoop` even when called from
tests like `watch_with_different_context()` which themselves use
`GMainContext` directly.
Thus, it’s possible for the `GMainLoop` to not be running, while the
test is iterating on `g_main_context_iteration()`. In this case,
`g_main_loop_quit()` is a no-op and will not wake up the `GMainContext`.
This causes the test to livelock in around 1 in 1200 test runs.
Fix this by adding an explicit `g_main_context_wakeup()` call after each
`g_main_loop_quit()` call. A more comprehensive fix would be to port all
the tests in this file to iterating `GMainContext` directly, and drop
all the `GMainLoop` usage, but I don’t have time for that right now.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
If `g_file_monitor_source_dispatch()` drops the last reference to its
`GLocalFileMonitor`, a deadlock will occur, because disposing the
`GLocalFileMonitor` causes synchronous disposal of the
`GFileMonitorSource`, and hence an attempt to re-lock the already-locked
mutex in the `GFileMonitorSource`.
Fix that by dropping the reference to the `GLocalFileMonitor` after
unlocking.
Diagnosed by Ting-Wei Lan. The bug was originally introduced by me in
commit 592a13b483.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Relax the requirement for the test to only be compiled/run under gcc,
since a version of LLVM was released which supports `--add-symbol`.
`objcopy` should be overrideable to be `llvm-objcopy` by using a machine
file as per https://mesonbuild.com/Machine-files.html#binaries.
Suggested and tested by Grigory Vasilyev.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2423
Clarify that the terms ‘GUID’ and ‘UUID’ are used interchangeably in the
context of D-Bus, and that neither of them are an RFC 4122 UUID.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Update several links to allow the remote to use its configured default
branch name, rather than specifying `master` as the default branch name.
This will help avoid breakage if any of these projects rename their
default branch in the future.
Fix a few of the links where they were hitting redirects or had moved.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2348
Since commit 87e19535fe, the ETag check when writing out a file through
a symlink (following the symlink) has been incorrectly using the ETag
value of the symlink, rather than the target file. This is incorrect
because the ETag should represent the file content, not its metadata or
links to it.
Fix that, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2417
This adds g_tls_connection_get_protocol_version(),
g_tls_connection_get_ciphersuite_name(), and DTLS variants. This will
allow populating TLS connection information in the WebKit web inspector.
This is WIP because we found it's not quite possibly to implement
correctly with GnuTLS. See glib-networking!151.
This is the result of checking each `Returns:` line in these files. I’ve
only considered nullability and not other (potentially missing or
incorrect) annotations.
Including suggestions by Simon McVittie.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2227
In a PKCS#11 operation there are multiple types of PINs possibly
needed and these flags add a way to expose them to the user.
This design exactly matches gnutls' gnutls_pin_flag_t API.
This changeset exposes
* `not-valid-before`
* `not-valid-after`
* `subject-name`
* `issuer-name`
on GTlsCertificate provided by the underlying TLS Backend.
In order to make use of these changes,
see the related [glib-networking MR][glib-networking].
This change aims to help populate more of the [`Certificate`][wk-cert]
info in the WebKit Inspector Protocol on Linux.
This changeset stems from work in Microsoft Playwright to [add more info
into its HAR capture][pw] generated from the Inspector Protocol events
and will bring feature parity across WebKit platforms.
[wk-cert]: 8afe31a018/Source/JavaScriptCore/inspector/protocol/Security.json
[pw]: https://github.com/microsoft/playwright/pull/6631
[glib-networking]: https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/156
The `GApplication` must be registered before calling
`g_application_mark_busy()`. Document that, and add a guard.
The same is true for `g_application_unmark_busy()`, but the existing
documentation and guard for `busy_count > 0` are enough.
For the reasons given in the new bit of documentation, GDBusProxy should
not be used for connecting to stateless D-Bus services which may be
restarted at any point.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1036
Include the base URI in the `g_test_bug()` calls instead. This resolves
inconsistencies between the old bug base (bugzilla.gnome.org) and the
new bug base (gitlab.gnome.org). It also has the advantage that the URI
passed to `g_test_bug()` is now clickable in the code editor, rather
than being split across two locations.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/275#note_303175
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Since commit ab285899a6 ('gdbusconnection: Document main context
iteration for unsubscript'), we document when the user is guaranteed
that all resources are gone after g_dbus_connection_signal_unsubscribe().
This is not merely an implementation detail, it's something that the
user needs to be able to rely on. It is good that this is documented.
However, libnm does something different ([1]). It registers to several D-Bus
signals without providing a GDestroyNotify. After unsubscription, it schedules
another idle action with lower priority and uses that to know when
cleanup is complete. I think this is a useful alternative and should
also be guaranteed and documented to work.
Also note that this isn't just some implementation detail that currently
happens to work. GDBusConnection tightly integrates with GMainContext and it
works by scheduling idle sources with G_PRIORITY_DEFAULT priority. It needs to
schedule all events with this same priority, otherwise the ordering is not
preserved. At this point, with GDBusConnection working this way, this is no longer
something that can reasonably be any different. It's how GDBusConnection fundamentally
works, and a user must be able to rely on that. As such, this new promise isn't
something that we would want to break in the future.
Thus document it.
[1] a55c10c6cb/src/libnm-client-impl/nm-client.c (L7918)
This fixes a bug where the family flag was ignored in lookup_data_new,
causing the resolver to call getaddrinfo with no hints set when clearly
the family hint should have been set.
gio/tests/unix-streams.c: In function ‘test_write_async_wouldblock’:
gio/tests/unix-streams.c:692:17: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
692 | for (i = 0; i < 4 * pipe_capacity; i++)
| ^
gio/tests/unix-streams.c: In function ‘test_writev_async_wouldblock’:
gio/tests/unix-streams.c:780:17: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
780 | for (i = 0; i < 4 * pipe_capacity; i++)
| ^
An application that has been shut down is still marked as registered
even if its implementation has been already destroyed.
This may lead to unguarded crashes when calling functions that have
assumptions for being used with registered applications.
So, when an application is registered, mark it as unregistered just
before destroying its implementation and after being shut down, so that
we follow the registration process in reversed order.
Added tests
gio/tests/socket-common.c: In function ‘socket_address_from_string’:
gio/tests/socket-common.c:50:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
50 | for (i = 0; i < G_N_ELEMENTS (unix_socket_address_types); i++)
| ^
gio/tests/gnotification-server.c: In function ‘g_notification_server_bus_acquired’:
gio/tests/gnotification-server.c:224:3: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘const struct _GDBusInterfaceVTable’}
224 | };
| ^
gio/tests/gdbus-proxy.c: In function ‘strv_equal’:
gio/tests/gdbus-proxy.c:158:32: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
158 | res = g_strv_length (strv) == count;
| ^~
gio/gkeyfilesettingsbackend.c: In function ‘convert_path’:
gio/gkeyfilesettingsbackend.c:155:15: warning: comparison of integer
expressions of different signedness: ‘gsize’ {aka ‘long unsigned int’}
and ‘gint’ {aka ‘int’}
155 | if (key_len < kfsb->prefix_len ||
| ^
