There are two memory monitor tests that use Python's unittest module directly,
but GLib tests should be outputting TAP. Use the embedded TAPTestRunner to
ensure that TAP is output for these tests too.
D-Bus filter functions run in a worker thread. The `gdbus-connection`
test was sharing a `FilterData` struct between the main thread and the
filter function, which was occasionally (on the order of 0.01% of test
runs) causing spurious test failures due to racing on reads/writes of
`num_handled`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #480
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #480
Distributions will likely want to update GLib before
GObject-Introspection, to avoid circular dependencies.
Signed-off-by: Simon McVittie <smcv@debian.org>
Clang warns about string+int not appending to the string (to try and
catch newbie mistakes). While this test didn’t expect that to happen, it
was substituting the same constant string in multiple places for no good
reason. Switch to a single static const string, which should also fix
the compiler warning.
We have to define the string length since it’s used in various
stack-allocated array lengths. This is the easiest fix without more
major refactoring of the test to be less 90s.
Also make things a bit more static.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When running under CI, each iteration takes so long that the total test
time is around 200s. If the CI runner is highly loaded, this can tip it
over the timeout of 360s.
Reduce the iteration counts unless running the test thoroughly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
Currently the test waits for 1s before deciding that a refcount has been
leaked. But slow test machines might take longer than that between
scheduling different threads to sort out the refcount, so increase the
timeout.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
bindfs is part of the setup process, so if it fails (as can happen if
the `fuse` kernel module has not been loaded — not much we can do about
that) then skip the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When testing that signals are delivered to the correct thread, and are
delivered the correct number of times, call `EmitSignal()` on the
`gdbus-testserver` to trigger a signal emission, and listen for that.
Previously, the code listened for `NameOwnerChanged` and connected to
the bus again to trigger emission of that. The problem with that is that
other things happening on the bus (for example, an old
`gdbus-testserver` instance disconnecting) can cause `NameOwnerChanged`
signal emissions. Sometimes, the `gdbus-threading` test was failing the
`signal_count == 1` assertion due to receiving more than one
`NameOwnerChanged` emission.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This is equivalent, but makes the loop exit conditions a little clearer,
since they’re actually in a `while` statement, rather than being a
`g_main_loop_quit()` call in a callback somewhere else in the file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
As with the previous commit, don’t stop iterating the `context` in
`test_delivery_in_thread_func()` until the unsubscription from a signal
is complete, and hence there’s a guarantee that no callbacks are pending
in the `thread_context`.
This commit uses the `GDestroyNotify` for
`g_dbus_connection_signal_subscribe()` as a synchronisation message from
the D-Bus worker thread to the `test_delivery_in_thread_func()` thread
to notify of signal unsubscription.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Previously, the code in `ensure_gdbus_testserver_up()` created a proxy
object and watched its `name-owner` to see when the
`com.example.TestService` name appeared.
This ended up subscribing to three signals (one of them for name
ownership, and two unused for properties of the proxy), and was racy. In
particular, the `name-owner` property could be set before all D-Bus
messages had been processed — it could have been derived from getting
the owner of the name, for example.
This left unprocessed messages hanging around in the `context`, but that
context was never iterated again, which essentially leaked the
references held by those messages. That included a reference to the
`GDBusConnection`.
The first part of the fix is to simplify the code to use
`g_bus_watch_name_on_connection()`, so there’s only one signal
subscription to worry about.
The second part of the fix is to use the `GDestroyNotify` callback for
the watch data to be notified of when all D-Bus traffic has been
processed and the signal unsubscription is complete. At this point, it’s
guaranteed that there are no idle callbacks pending in the
`GMainContext`, since the `GDestroyNotify` callback is the last one
invoked on the `GMainContext`.
Essentially, this commit uses the `GDestroyNotify` callback as a
synchronisation message between the D-Bus worker thread and the thread
calling `ensure_gdbus_testserver_up()`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Iterate the given `context` while waiting, rather than sleeping. This
ensures that if the errant `GDBusConnection` ref is held by some pending
callback in the given `context`, it will actually be released.
Typically `context` is going to be the global default main context.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This introduces no functional changes, but makes the code a little more
explicit about which connection and main context it’s operating on.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
These checks used to be a precondition on test_threaded_singleton(); but
the earlier tests could leave the refcount of the shared connection in a
bad state, and this wouldn’t be caught until later.
Factor out the check, increase the iteration count to 1000 (so the check
blocks for up to 1s rather than 100ms), and call it in more places.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
There was a slight race in name ownership: a gap between calling
`RequestName` (or receiving its reply) and subscribing to `NameLost`. In
that gap, another process could request and receive the name, and this
one wouldn’t know about it.
Fix that by subscribing to `NameAcquired` and `NameLost` before calling
`RequestName`, and then unsubscribing again if the subscriptions turn
out not to be necessary (if the process can’t own the requested name).
Spotted and diagnosed by Miika Karanki.
One of the tests needs an additional iteration of the main loop in order
to free all the signal closures before it can complete its checks.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1517
There were some problems about where to install `gio-launch-desktop` to
support multiarch systems without circular dependencies. Simon McVittie
suggested that, actually, given the current set of platforms supported
by `GDesktopAppInfo` (they’re all POSIX), we could just use `sh`.
That simplifies things nicely. `gio-launch-desktop` can always be
resurrected (and the multiarch debate continued and resolved) if needed
in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1633
Some CI platforms invoke these tests with euid != 0 but with
capabilities. Detect whether we have Linux CAP_DAC_OVERRIDE or other
OSs' equivalents, and skip tests that rely on DAC permissions being
denied if we do have that privilege.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2027
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2028
The loops should continue iterating if the timeout is non-zero and we're
still waiting for the updated value. Otherwise, if things break, we'll
be waiting until we receive a value that never arrives.
This reverts commit b6d8efbebc.
This GLib API is good, but the implentation is not ready, so there's no
reason to commit to the API in GLib 2.64. We can reland again when the
implementation is ready.
There are three problems: (a) The glib-networking implementation normally
works, but the test has been broken for a long time. I'm not comfortable
with adding a major new feature without a working test. This is
glib-networking#104. (b) The WebKit implementation never landed. There
is a working patch, but it hasn't been accepted upstream yet. This API
isn't needed in GLib until WebKit is ready to start using it.
https://bugs.webkit.org/show_bug.cgi?id=200805. (c) Similarly, even if
the WebKit API was ready, that itself isn't useful until an application
is ready to start using it, and the Epiphany level work never happened.
Let's try again for GLib 2.66. Reverting this commit now just means we
gain another six months before committing to the API forever. No reason
to keep this in GLib 2.64 when nothing is using it yet.
This complements the `--glib-min-required` argument, just like the
`GLIB_MIN_REQUIRED` and `GLIB_MAX_ALLOWED` preprocessor defines which
control access to APIs in C.
Currently, it doesn’t affect code generation at all. When we next change
code generation, we will need to gate any new API usage on this
argument.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1993
This makes it consistent with the `GLIB_MIN_REQUIRED` defines which are
used for API stability/versioning in C code.
It doesn’t otherwise change the behaviour of the `--glib-min-version`
argument.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1993
This fixes the following build failure on FreeBSD:
```
In file included from ../gio/tests/win32-appinfo.c:24:
/usr/include/malloc.h:3:2: error: "<malloc.h> has been replaced by <stdlib.h>"
#error "<malloc.h> has been replaced by <stdlib.h>"
```
Hopefully it doesn’t break Windows.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As with all D-Bus signal subscriptions, it’s possible for a signal
callback to be invoked in one thread (T1) while another thread (T2) is
unsubscribing from that signal. In this case, T1 is the main thread, and
T2 is the D-Bus connection worker thread which is unsubscribing all
signals as it’s in the process of closing.
Due to this possibility, all `user_data` for signal callbacks needs to
be referenced outside the lifecycle of the code which
subscribes/unsubscribes the signal. In other words, it’s not safe to
subscribe to a signal, store the subscription ID in a struct,
unsubscribe from the signal when freeing the struct, and dereference the
struct in the signal callback. The data passed to the signal callback
has to have its own strong reference.
Instead, it’s safe to subscribe to a signal and add a strong reference
to the struct, store the subscription ID in that struct, and unsubscribe
from the signal when the last external reference to your struct is
dropped. That unsubscription should break the refcount cycle between the
signal connection and the struct, and allow the struct to be completely
freed. Only with that approach is it safe to dereference the struct in
the signal callback, if there’s any possibility that the signal might be
unsubscribed from a separate thread.
The tests need specific additional main loop cycles to completely emit
the NameLost signal callback. Ideally they need refactoring, but this
will do (1000 test cycles passed).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #978
1) When parsing the executable name out of the command line,
see if the executable is rundll32.exe. If that is the case,
use the DLL name from its first argument as the "executable"
(this is used only for matching, and Windows Registry matches
these programs by their DLLs, so this is correct; for running
the application GLib would still use the command line, with
rundll32).
2) If an app runs with rundll32, ensure that rundll32 arguments
can be safely quoted. Otherwise GLib will break them with its
protective quotation.
Currently the code generated by gdbus-codegen uses
G_DBUS_CALL_FLAGS_NONE in its D-Bus calls, which occur for each method
defined by the input XML, and for proxy_set_property functions. This
means that if the daemon which implements the methods checks for
G_DBUS_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION and only does interactive
authorization if that flag is present, users of the generated code have
no way to cause the daemon to use interactive authorization (e.g. polkit
dialogs).
If we simply changed the generated code to always use
G_DBUS_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION, its users would have no
way to disallow interactive authorization (except for manually calling
the D-Bus method themselves).
So instead, this commit adds a GDBusCallFlags argument to method call
functions. Since this is an API break which will require changes in
projects using gdbus-codegen code, the change is conditional on the
command line argument --glib-min-version having the value 2.64 or
higher.
The impetus for this change is that I'm changing accountsservice to
properly respect G_DBUS_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION, and
libaccountsservice uses generated code for D-Bus method calls. So
these changes will allow libaccountsservice to continue allowing
interactive authorization, and avoid breaking any users of it which
expect that. See
https://gitlab.freedesktop.org/accountsservice/accountsservice/merge_requests/46
It might make sense to also let GDBusCallFlags be specified for property
set operations, but that is not needed in the case of accountsservice,
and would require significant work and breaking API in multiple places.
Similarly, the generated code currently hard codes -1 as the timeout
value when calling g_dbus_proxy_call*(). Add a timeout_msec argument so
the user of the generated code can specify the timeout as well.
Also, test this new API. In gio/tests/codegen.py we test that the new
arguments are generated if and only of --glib-min-version is used with a
value greater than or equal to 2.64, and in gio/tests/meson.build we
test that the generated code with the new API can be linked against.
The test_unix_fd_list() test also needed modification to continue
working now that we're using gdbus-test-codegen.c with code generated
with --glib-min-version=2.64 in one test.
Finally, update the docs for gdbus-codegen to explain the effect of
using --glib-min-version 2.64, both from this commit and from
"gdbus-codegen: Emit GUnixFDLists if an arg has type `h` w/
min-version".
For the check "if (error != NULL)" to work as expected, the
create_server() (and create_server_full()) functions need to make
sure to return an error for all the possible failures, but this
might not always be the case.
Catch all the failures by testing for a non-NULL return value if there
was no error.
They didn’t match the prototype generated by `gdbus-codegen`, which
meant that the FD list was being iterated incorrectly. Secondly, the
document ID list returned by the method was not NULL terminated, which
could lead to reading off the end of the list.
Somehow, neither of these bugs caused problems on Linux, but they did
cause problems on FreeBSD.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1983
Reduce the number of iterations of things sent over a mock session bus
from different threads, to avoid the test spending quite so long
contested over the `gsignal.c` lock.
The test now takes about 10 seconds, according to `time`, rather than
around 100 or longer.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
By removing the cached global proxy in gdocumentportal.c, we can
re-enable the checks for proper shutdown of the session bus connection
in the dbus-appinfo.c test.
We can't use session_bus_down() in the test since gdocumentportal.c
holds a reference to the session bus connection, preventing it from
being finalised.
