bindfs is part of the setup process, so if it fails (as can happen if
the `fuse` kernel module has not been loaded — not much we can do about
that) then skip the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When testing that signals are delivered to the correct thread, and are
delivered the correct number of times, call `EmitSignal()` on the
`gdbus-testserver` to trigger a signal emission, and listen for that.
Previously, the code listened for `NameOwnerChanged` and connected to
the bus again to trigger emission of that. The problem with that is that
other things happening on the bus (for example, an old
`gdbus-testserver` instance disconnecting) can cause `NameOwnerChanged`
signal emissions. Sometimes, the `gdbus-threading` test was failing the
`signal_count == 1` assertion due to receiving more than one
`NameOwnerChanged` emission.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This is equivalent, but makes the loop exit conditions a little clearer,
since they’re actually in a `while` statement, rather than being a
`g_main_loop_quit()` call in a callback somewhere else in the file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
As with the previous commit, don’t stop iterating the `context` in
`test_delivery_in_thread_func()` until the unsubscription from a signal
is complete, and hence there’s a guarantee that no callbacks are pending
in the `thread_context`.
This commit uses the `GDestroyNotify` for
`g_dbus_connection_signal_subscribe()` as a synchronisation message from
the D-Bus worker thread to the `test_delivery_in_thread_func()` thread
to notify of signal unsubscription.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Previously, the code in `ensure_gdbus_testserver_up()` created a proxy
object and watched its `name-owner` to see when the
`com.example.TestService` name appeared.
This ended up subscribing to three signals (one of them for name
ownership, and two unused for properties of the proxy), and was racy. In
particular, the `name-owner` property could be set before all D-Bus
messages had been processed — it could have been derived from getting
the owner of the name, for example.
This left unprocessed messages hanging around in the `context`, but that
context was never iterated again, which essentially leaked the
references held by those messages. That included a reference to the
`GDBusConnection`.
The first part of the fix is to simplify the code to use
`g_bus_watch_name_on_connection()`, so there’s only one signal
subscription to worry about.
The second part of the fix is to use the `GDestroyNotify` callback for
the watch data to be notified of when all D-Bus traffic has been
processed and the signal unsubscription is complete. At this point, it’s
guaranteed that there are no idle callbacks pending in the
`GMainContext`, since the `GDestroyNotify` callback is the last one
invoked on the `GMainContext`.
Essentially, this commit uses the `GDestroyNotify` callback as a
synchronisation message between the D-Bus worker thread and the thread
calling `ensure_gdbus_testserver_up()`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Iterate the given `context` while waiting, rather than sleeping. This
ensures that if the errant `GDBusConnection` ref is held by some pending
callback in the given `context`, it will actually be released.
Typically `context` is going to be the global default main context.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This introduces no functional changes, but makes the code a little more
explicit about which connection and main context it’s operating on.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
These checks used to be a precondition on test_threaded_singleton(); but
the earlier tests could leave the refcount of the shared connection in a
bad state, and this wouldn’t be caught until later.
Factor out the check, increase the iteration count to 1000 (so the check
blocks for up to 1s rather than 100ms), and call it in more places.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
There was a slight race in name ownership: a gap between calling
`RequestName` (or receiving its reply) and subscribing to `NameLost`. In
that gap, another process could request and receive the name, and this
one wouldn’t know about it.
Fix that by subscribing to `NameAcquired` and `NameLost` before calling
`RequestName`, and then unsubscribing again if the subscriptions turn
out not to be necessary (if the process can’t own the requested name).
Spotted and diagnosed by Miika Karanki.
One of the tests needs an additional iteration of the main loop in order
to free all the signal closures before it can complete its checks.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1517
There were some problems about where to install `gio-launch-desktop` to
support multiarch systems without circular dependencies. Simon McVittie
suggested that, actually, given the current set of platforms supported
by `GDesktopAppInfo` (they’re all POSIX), we could just use `sh`.
That simplifies things nicely. `gio-launch-desktop` can always be
resurrected (and the multiarch debate continued and resolved) if needed
in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1633
Some CI platforms invoke these tests with euid != 0 but with
capabilities. Detect whether we have Linux CAP_DAC_OVERRIDE or other
OSs' equivalents, and skip tests that rely on DAC permissions being
denied if we do have that privilege.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2027
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2028
The loops should continue iterating if the timeout is non-zero and we're
still waiting for the updated value. Otherwise, if things break, we'll
be waiting until we receive a value that never arrives.
This reverts commit b6d8efbebc.
This GLib API is good, but the implentation is not ready, so there's no
reason to commit to the API in GLib 2.64. We can reland again when the
implementation is ready.
There are three problems: (a) The glib-networking implementation normally
works, but the test has been broken for a long time. I'm not comfortable
with adding a major new feature without a working test. This is
glib-networking#104. (b) The WebKit implementation never landed. There
is a working patch, but it hasn't been accepted upstream yet. This API
isn't needed in GLib until WebKit is ready to start using it.
https://bugs.webkit.org/show_bug.cgi?id=200805. (c) Similarly, even if
the WebKit API was ready, that itself isn't useful until an application
is ready to start using it, and the Epiphany level work never happened.
Let's try again for GLib 2.66. Reverting this commit now just means we
gain another six months before committing to the API forever. No reason
to keep this in GLib 2.64 when nothing is using it yet.
This complements the `--glib-min-required` argument, just like the
`GLIB_MIN_REQUIRED` and `GLIB_MAX_ALLOWED` preprocessor defines which
control access to APIs in C.
Currently, it doesn’t affect code generation at all. When we next change
code generation, we will need to gate any new API usage on this
argument.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1993
This makes it consistent with the `GLIB_MIN_REQUIRED` defines which are
used for API stability/versioning in C code.
It doesn’t otherwise change the behaviour of the `--glib-min-version`
argument.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1993
This fixes the following build failure on FreeBSD:
```
In file included from ../gio/tests/win32-appinfo.c:24:
/usr/include/malloc.h:3:2: error: "<malloc.h> has been replaced by <stdlib.h>"
#error "<malloc.h> has been replaced by <stdlib.h>"
```
Hopefully it doesn’t break Windows.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As with all D-Bus signal subscriptions, it’s possible for a signal
callback to be invoked in one thread (T1) while another thread (T2) is
unsubscribing from that signal. In this case, T1 is the main thread, and
T2 is the D-Bus connection worker thread which is unsubscribing all
signals as it’s in the process of closing.
Due to this possibility, all `user_data` for signal callbacks needs to
be referenced outside the lifecycle of the code which
subscribes/unsubscribes the signal. In other words, it’s not safe to
subscribe to a signal, store the subscription ID in a struct,
unsubscribe from the signal when freeing the struct, and dereference the
struct in the signal callback. The data passed to the signal callback
has to have its own strong reference.
Instead, it’s safe to subscribe to a signal and add a strong reference
to the struct, store the subscription ID in that struct, and unsubscribe
from the signal when the last external reference to your struct is
dropped. That unsubscription should break the refcount cycle between the
signal connection and the struct, and allow the struct to be completely
freed. Only with that approach is it safe to dereference the struct in
the signal callback, if there’s any possibility that the signal might be
unsubscribed from a separate thread.
The tests need specific additional main loop cycles to completely emit
the NameLost signal callback. Ideally they need refactoring, but this
will do (1000 test cycles passed).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #978
1) When parsing the executable name out of the command line,
see if the executable is rundll32.exe. If that is the case,
use the DLL name from its first argument as the "executable"
(this is used only for matching, and Windows Registry matches
these programs by their DLLs, so this is correct; for running
the application GLib would still use the command line, with
rundll32).
2) If an app runs with rundll32, ensure that rundll32 arguments
can be safely quoted. Otherwise GLib will break them with its
protective quotation.
Currently the code generated by gdbus-codegen uses
G_DBUS_CALL_FLAGS_NONE in its D-Bus calls, which occur for each method
defined by the input XML, and for proxy_set_property functions. This
means that if the daemon which implements the methods checks for
G_DBUS_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION and only does interactive
authorization if that flag is present, users of the generated code have
no way to cause the daemon to use interactive authorization (e.g. polkit
dialogs).
If we simply changed the generated code to always use
G_DBUS_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION, its users would have no
way to disallow interactive authorization (except for manually calling
the D-Bus method themselves).
So instead, this commit adds a GDBusCallFlags argument to method call
functions. Since this is an API break which will require changes in
projects using gdbus-codegen code, the change is conditional on the
command line argument --glib-min-version having the value 2.64 or
higher.
The impetus for this change is that I'm changing accountsservice to
properly respect G_DBUS_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION, and
libaccountsservice uses generated code for D-Bus method calls. So
these changes will allow libaccountsservice to continue allowing
interactive authorization, and avoid breaking any users of it which
expect that. See
https://gitlab.freedesktop.org/accountsservice/accountsservice/merge_requests/46
It might make sense to also let GDBusCallFlags be specified for property
set operations, but that is not needed in the case of accountsservice,
and would require significant work and breaking API in multiple places.
Similarly, the generated code currently hard codes -1 as the timeout
value when calling g_dbus_proxy_call*(). Add a timeout_msec argument so
the user of the generated code can specify the timeout as well.
Also, test this new API. In gio/tests/codegen.py we test that the new
arguments are generated if and only of --glib-min-version is used with a
value greater than or equal to 2.64, and in gio/tests/meson.build we
test that the generated code with the new API can be linked against.
The test_unix_fd_list() test also needed modification to continue
working now that we're using gdbus-test-codegen.c with code generated
with --glib-min-version=2.64 in one test.
Finally, update the docs for gdbus-codegen to explain the effect of
using --glib-min-version 2.64, both from this commit and from
"gdbus-codegen: Emit GUnixFDLists if an arg has type `h` w/
min-version".
For the check "if (error != NULL)" to work as expected, the
create_server() (and create_server_full()) functions need to make
sure to return an error for all the possible failures, but this
might not always be the case.
Catch all the failures by testing for a non-NULL return value if there
was no error.
They didn’t match the prototype generated by `gdbus-codegen`, which
meant that the FD list was being iterated incorrectly. Secondly, the
document ID list returned by the method was not NULL terminated, which
could lead to reading off the end of the list.
Somehow, neither of these bugs caused problems on Linux, but they did
cause problems on FreeBSD.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1983
Reduce the number of iterations of things sent over a mock session bus
from different threads, to avoid the test spending quite so long
contested over the `gsignal.c` lock.
The test now takes about 10 seconds, according to `time`, rather than
around 100 or longer.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
By removing the cached global proxy in gdocumentportal.c, we can
re-enable the checks for proper shutdown of the session bus connection
in the dbus-appinfo.c test.
We can't use session_bus_down() in the test since gdocumentportal.c
holds a reference to the session bus connection, preventing it from
being finalised.
Those tests require Python, gobject-introspection and python-dbusmock
making them unsuitable to be run within the uninstalled test suite.
There are no restrictions of dependencies when it comes to installed
tests so use those to exercise GMemoryMonitor.
This is a reimplementation of commit
4aba03562b from Will Thompson, but
conditional on the caller passing `--glib-min-version 2.64` to
`gdbus-codegen` to explicitly opt-in to the new behaviour.
From the commit message for that commit:
Previously, if a method was not annotated with org.gtk.GDBus.C.UnixFD
then the generated code would never contain GUnixFDList parameters, even
if the method has 'h' (file descriptor) parameters. However, in this
case, the generated code is essentially useless: the method cannot be
called or handled except in degenerate cases where the file descriptors
are missing or ignored.
Check the argument types for 'h', and if present, generate code as if
org.gtk.GDBus.C.UnixFD annotation were specified.
Includes a unit test too.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1726
This can be used by callers to opt-in to backwards-incompatible changes
to the behaviour or output of `gdbus-codegen` in future. This commit
doesn’t introduce any such changes, though.
Documentation and unit tests included.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1726
Skipped tests use "77" as the return value, so return 77 instead of 0
when the static-link.py test gets skipped because of a missing
environment variable.
If the fuse module is loaded but /dev/fuse doesn't exist, it's likely
that we're running in a rootless container, or a badly setup one, and we
won't be able to use fuse, so skip this test.
This happened on my local system using podman running as a normal user,
but this apparently works as expected in our CI[1].
[1]: https://gitlab.gnome.org/GNOME/glib/merge_requests/466
Add a Python-based test wrapper for the `gdbus-codegen` executable,
similar to the existing tests for `glib-mkenums` and friends.
Add a few basic tests to begin with, but this doesn’t approach anywhere
near full coverage.
The next step is to move the existing Meson-based `gdbus-codegen` tests
from `gio/tests/meson.build` into the Python test suite.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1612
Those tests seem to regularly fail because a timeout (which we're
measuring outside the function that times out) is too long, which can
happen when the system is busy.
Don't run those tests unless "thorough" tests are requested. This
disables those tests by default.
Bail out! GLib-GIO:ERROR:../gio/tests/socket.c:1167:test_timed_wait: assertion failed (poll_duration < 112000): (114254 < 112000)
Bail out! GLib-GIO:ERROR:../gio/tests/cancellable.c:167:on_mock_operation_ready: assertion failed (error == (g-io-error-quark, 19)): error is NULL
Now we're returning the file type again, we need to mask it out to
compare with the mode. We can also check that the statbuf said the file
is a regular file.
Related: #1934
This is the analogue of commit 7c4e6e9fbe, but applied to the
`GDBusMessage` parser, which does its own top-level parsing of the
variant format in D-Bus messages.
Previously, this code allowed arbitrary recursion of variant containers,
which could lead to a stack overflow. Now, that recursion is limited to
64 levels, as per the D-Bus specification:
https://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-marshaling-signature
This includes a new unit test.
oss-fuzz#14870
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Tools like this should be configurable in a cross or native file. In
particular, if we are cross-compiling (with an executable wrapper like
qemu-arm), the build system ld is not necessarily able to manipulate
host system objects.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Otherwise we'll never test the EXTERNAL-only mode, because that relies
on testing the private macros
G_CREDENTIALS_UNIX_CREDENTIALS_MESSAGE_SUPPORTED and
G_CREDENTIALS_SOCKET_GET_CREDENTIALS_SUPPORTED.
Fixes: 9f962ebe "Add a test for GDBusServer authentication"
Signed-off-by: Simon McVittie <smcv@collabora.com>
This bypasses any issues we might have with containers where IPv6 is
returned by name resolution (particularly since GNOME/glib!616) but
doesn't necessarily actually work.
This comes at a minor test-coverage cost: we don't test GDBusServer's
default behaviour when told to listen on "tcp:" or "nonce-tcp:", and
on systems where IPv6 is available, we don't test it. If we want to
do those, we should perhaps do them in separate tests, and disable
those tests when binding to ::1 doesn't work.
Mitigates: GNOME/glib#1912
Signed-off-by: Simon McVittie <smcv@collabora.com>
g_assert() is compiled out by `G_DISABLE_ASSERT` and doesn’t give such
useful messages on failure.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
No need to clear it to NULL before every time it’s used, since we assert
that it’s never set.
This introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This avoids failure to listen on the given address on non-Linux Unix
kernels, where abstract sockets do not exist and so unix:tmpdir is
equivalent to unix:dir.
To avoid bugs like this one recurring, run most of these tests using
the unix:dir address type, where Linux is equivalent to other Unix
kernels; just do one unix:tmpdir test, to check that we still
interoperate with libdbus when using abstract sockets on Linux.
Resolves: GNOME/glib#1920
Fixes: 9f962ebe "Add a test for GDBusServer authentication"
Signed-off-by: Simon McVittie <smcv@collabora.com>
Previously, we used unix:tmpdir, except in tests that verify that a
particular address type works (notably unix:dir). Now we use unix:dir
most of the time, and unix:tmpdir gets its own test instead.
This helps to ensure that the tests continue to work on non-Linux Unix
kernels, where abstract sockets do not exist and so unix:tmpdir is
equivalent to unix:dir, even in the common case where the developer has
only tried the test on Linux.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Otherwise, since GNOME/glib!1193, the listening socket won't be deleted,
and if we are not using abstract sockets (for example on *BSD), g_rmdir
will fail with ENOTEMPTY.
Fixes: 8e32b8e8 "gdbusserver: Delete socket and nonce file when stopping server"
Resolves: GNOME/glib#1921
Signed-off-by: Simon McVittie <smcv@collabora.com>
So that the tests all end up using separate `.dbus-keyring` directories,
and hence not racing to create and acquire lock files, use
`G_TEST_OPTION_ISOLATE_DIRS` to ensure they all run in separate
disposable directories.
This has the added benefit of meaning they don’t touch the developer’s
actual `$HOME` directory.
This reduces the false-failure rate of `gdbus-peer` by a factor of 9 for
me on my local machine.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1912
There’s actually no need for them to be global or reused between unit
tests, so move them inside the test functions.
This is one step towards eliminating shared state between the unit
tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1912
In particular, if libbdus is available, we test interoperability with
a libdbus client: see GNOME/glib#1831. Because that issue describes a
race condition, we do each test repeatedly to try to hit the failing
case.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Otherwise we’ll end up using the host’s `objcopy`, which will output
object files in the wrong format.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1916
This reverts commit 4aba03562b, preserving
the new tests but adjusting them to assert that the old behaviour is
restored.
As expected, there were a few projects which broke because of this.
Unfortunately, in one case the breakage crosses a project boundary:
sysprof ships D-Bus introspection XML, which is consumed by mutter and
passed through gdbus-codegen.
Since sysprof cannot add this annotation without breaking its existing
users, a warning is also not appropriate.
https://gitlab.gnome.org/GNOME/jhbuild/issues/41https://gitlab.gnome.org/GNOME/sysprof/issues/17https://gitlab.gnome.org/GNOME/glib/issues/1726
Skip it on systems which don’t support it, rather than compiling it out.
That gives us more information from test runs about which tests are
being run on which architectures.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Currently, there is no quick way to find whether and element is already
part of a list store, except for manually writing a for-loop and calling
`g_list_model_get_item()` and breaking when you find the item.
This is mostly just a small API addition to support this use case.
Fixes https://gitlab.gnome.org/GNOME/glib/issues/1011
When compiling GLib with `-Wsign-conversion`, we get various warnings
about the atomic calls. A lot of these were fixed by
3ad375a629, but some remain. Fix them by
adding appropriate casts at the call sites.
Note that `g_atomic_int_{and,or,xor}()` actually all operate on `guint`s
rather than `gint`s (which is what the rest of the `g_atomic_int_*()`
functions operate on). I can’t find any written reasoning for this, but
assume that it’s because signedness is irrelevant when you’re using an
integer as a bit field. It’s unfortunate that they’re named a
`g_atomic_int_*()` rather than `g_atomic_uint_*()` functions.
Tested by compiling GLib as:
```
CFLAGS=-Wsign-conversion jhbuild make -ac |& grep atomic
```
I’m not going to add `-Wsign-conversion` to the set of default warnings
for building GLib, because it mostly produces false positives throughout
the rest of GLib.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1565
They provide more detailed failure messages, and aren’t compiled out
when building with `G_DISABLE_ASSERT`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Previously, if a method was not annotated with org.gtk.GDBus.C.UnixFD
then the generated code would never contain GUnixFDList parameters, even
if the method has 'h' (file descriptor) parameters. However, in this
case, the generated code is essentially useless: the method cannot be
called or handled except in degenerate cases where the file descriptors
are missing or ignored.
Check the argument types for 'h', and if present, generate code as if
org.gtk.GDBus.C.UnixFD annotation were specified.
This change will break any existing code which refers to the (useless)
wrappers for such methods. The workaround for such code is to add the
org.gtk.GDBus.C.UnixFD annotation, which will cause the same generated
code to be emitted before and after this change.
If this is found to cause widespread problems, we can explore a
different approach (perhaps emitting a warning from the code generator,
or annotating the symbols as deprecated).
https://gitlab.gnome.org/GNOME/glib/issues/1726
Instead of letting each directory to find its way to link with libdl,
it is easier to put the check in the top level, so its result can be
used by all directories.
It is a follow-up of https://gitlab.gnome.org/GNOME/glib/merge_requests/810.
When resetting a key in the delayed settings backend,
g_settings_backend_changed() was not called to notify the backend of
the change.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1309
We're using the `install` argument for configure_file() all over the
place.
The support for an `install` argument for configure_file() was added in
Meson 0.50, but we haven't bumped the minimum version of Meson we
require, yet; which means we're getting compatibility warnings when
using recent versions of Meson, and undefined behaviour when using older
versions.
The configure_file() object defaults to `install: false`, unless an
install directory is used. This means that all instances of an `install`
argument with an explicit `true` or `false` value can be removed,
whereas all instances of `install` with a value determined from a
configuration option must be turned into an explicit conditional.
The plugin modules in these tests get statically linked with a separate
copy of GLib so they end up calling vfuncs in their own copy of GLib.
Fixes#1648
We need to enable building the dirent and gnulib sources for clang-cl,
as we are still using the Microsoft-style headers and lib's and CRT.
We need to also do this for the following, for similar reasoning:
-Symbol export (via __declspec(dllexport))
-Dependency discovery without pkg-config files
-long long and ssize_t detection
We do, however, enable the autoptr tests for clang-cl builds. Note that
at this point real MSVC builds are still better supported than clang-cl
builds, and it will likely remain so for at least the near future,
alhtough real MSVC builds of the GTK stack are consumable and are usable
by clang-cl.
Now that we're not calling g_object_run_dispose() indirectly in
g_test_dbus_down() (see commit "Revert "gtestdbus: Properly close server
connections""), the test gdbus-connection-loss is failing with the
message "Bail out! GLib-GIO-FATAL-WARNING: Weak notify timeout, object
ref_count=1". This is because we're holding a reference to the singleton
connection object while calling session_bus_down() in the test's main().
So then we end up waiting for 30 seconds in
_g_object_unref_and_wait_weak_notify() for the GWeakNotify to be
triggered, which never happens.
The fix is to unref the connection before calling session_bus_down().
This is consistent with how other tests work, and is safe because the
only method called on the connection has already errored out, as
asserted by the test.
This reverts commit c37cd19fee.
Now that we've reverted the commit "gtestdbus: Properly close server
connections", g_test_dbus_down() no longer returns early and we no
longer need this workaround. Since the gdbus-names test seems to
properly unref its GDBusConnection objects it's not clear to me why it
needed the sleep to succeed. However even at the time the failure wasn't
reproducible according to this comment[1] so it's probably not worth
spending more effort trying to reproduce it now.
[1] https://gitlab.gnome.org/GNOME/glib/issues/787#note_214235
There seems to be no reason to do so, and since the `appinfo` test was
ported to use `G_TEST_OPTION_ISOLATE_DIRS`, it has been causing
coredumps to accumulate. `gnome-terminal` was chosen as the terminal,
but it couldn’t find its GSettings schemas due to all the XDG
environment variables being cleared to `/dev/null` by
`G_TEST_OPTION_ISOLATE_DIRS`.
In order to keep using `gnome-terminal` as a subprocess in the tests,
we’d need to explicitly set up its environment so it can load the right
GSettings schemas. That’s a lot of work for not much gain.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #436
On Visual Studio, Meson builds modules as xxxx.dll, not libxxxx.dll when
xxxx is specified as the name for the shared_module() build directive.
This means that in the test programs if we expect for libxxxx for the
module name, the test will fail as there is no libxxxx.dll but there is
xxxx.dll. This makes the test program look for the module files
correctly.
This ensures that D-Bus connections established with unix:dir and
unix:path addresses actually work properly. Previously, we only tested
unix:tmpdir and TCP addresses.
unix:dir= addresses are exactly the same as unix:tmpdir= addresses,
already supported by GDBus, except they forbid use of abstract sockets.
This is convenient for situations where abstract sockets are
impermissible, such as when a D-Bus client inside a network namespace
needs to connect to a server running in a different network namespace.
An abstract socket cannot be shared between two processes in different
network namespaces.
Applications could use unix:path= addresses instead, so this is only a
convenience, but there's no good reason not to support unix:dir=.
Currently it is not supported simply because unix:dir= is a relatively
recent addition to the D-Bus spec.
It's somewhat unrealistic to use a GDBusServer without a
GDBusAuthObserver, because most D-Bus servers want to be like the
standard session bus (the owning user can connect) rather than being
like the standard system bus (all users can connect, the server is a
security boundary, and many bugs are security vulnerabilities).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Previously, its tests were being run in the build directory, which is
fine (it should always be writable). If multiple tests were run in
parallel, for example with Meson’s `--repeat` option, their test files
would collide.
Fix that by running each test instance in a separate subdirectory of
`/tmp`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1634
Add a case for when the IPv6 result comes back negative and the IPv4
result is significantly delayed. This is exactly the case that causes
the bug addressed by GNOME/glib!865
It should produce a generic result, but not crash. It was previously
crashing on macOS.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1729
g_assert_*() give more helpful error messages on failure, and aren’t
compiled out by G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This was introduced in commit 7846d6154a: g_subprocess_get_identifier()
will return NULL after the subprocess has exited, and the subprocess in
the `noop` test will exit as soon as it has started spawning. So if the
scheduler scheduled the testprog subprocess quickly, descheduled the
parent test process until the testprog exited, then the return value
from g_subprocess_get_identifier() would be NULL.
Move the g_subprocess_get_identifier() test to one which calls testprog
in `sleep-forever` mode, since that is guaranteed not to exit until
killed (which we do later in the test).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The parent GNetworkAddress contains a shared list of resolved
addresses that is used as a cache for multiple enumerations.
This commit ensures that the cache is only set upon completion of
DNS lookups and only read once by enumerations to avoid being in a
bad state.
Fixes#1771
Some of these have a negative master/slave connotation, and they add no
value. Change or drop them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The `monitor` test was originally written to test GFileMonitor with
directories. Over time, `testfilemonitor` acquired units for testing
directories as well, which made the `monitor` test reduntant.
Other GCC-like implementations of ld/objcopy (like LLVM) don’t yet
support the right command line arguments, so can’t compile the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1709
This introduces no functional changes, but combines two duplicated lists
and makes the meson.build file a little easier to follow.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1711
After repeated local testing, I can’t reproduce failures with them:
meson test --repeat 5000 gdbus-auth
meson test --repeat 5000 gdbus-bz627724
meson test --repeat 5000 gdbus-connection
The FreeBSD failures from pthread calls mentioned in #1614 should
probably manifest as use-after-free for GMutex or pthread_mutex_t on
Linux. Failing that, I haven’t seen any relevant FreeBSD failures on CI
for at least a month, so if it’s not fixed, the chances of debugging are
very low.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1614
Check for RTLD_NEXT being present, and disable the gsocketclient-slow
test if it's absent, since the shlib dependency of that test requires
RTLD_NEXT to function.
This allows the testsuite to be built on Cygwin, which behaves
exactly like UNIX, but doesn't have RTLD_NEXT.
Just skip the test if the unix transport isn’t supported. This means we
get better compilation coverage, and more explicit TAP output saying
that the test is being skipped on unsupported platforms.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The test performs implicit autolaunching of a bus
and checks if it is connectible.
In build the test is moved from "only non-windows with have_dbus_daemon"
to "anywhere".
This is intentional: actually it doesn't execute any external
binaries on unix (so doesn't require dbus_daemon)
and now has win32 implementation.
The test has some problems that are not problems of test itself,
but are reasoned by current win32 implementation:
- since the implementation uses global win32 kernel objects
with fixed names not depending on g_get_user_runtime_dir or other context
if preexisting bus running by some other libgio-using application
the test would silently pass.
- since the implementation uses problematic time-based synchronization,
that has a race condition between opening and reading mmaped address,
the test may randomly fail (I'd not seen this in practice).
- since the implementation autolaunched process works for 3 seconds
after last client disconnects, the executed subprocess runs for 3 seconds
after test exit, maybe locking the libgio-2.0-0.dll file for that time.
g_assert_*() give more informative failure messages, and aren’t compiled
out when building with G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert_*() give more informative failure messages, and aren’t compiled
out when building with G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In order to allow GLib itself to be built with G_DISABLE_ASSERT defined,
we need to explicitly undefine it when building the tests, otherwise
g_test_init() turns into an abort.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1708
g_assert_*() give more informative error messages on failure, and can’t
be disabled by G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Commit f975858e86 removed the NULL check in g_cancellable_cancel() by
accident which makes it crash when called with NULL.
Add the check back and add a test so this doesn't happen again.
Fixes#1710
Don’t pollute the build directory with files generated by running the
test.
Note that there are still other tests in the gsettings.c test suite
which use the build directory, but fixing them is a bit more involved
than I have time for right now. This is a step in the right direction.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This essentially reverts commit
cffed58737.
The preceding two commits have fixed the test so it’s no longer flaky.
The following command gives 5000 passes in a row for me:
meson test -C /opt/gnome/build/glib/ socket-service --repeat 5000
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1679
It’s occasionally possible for the cancellation of the service to happen
before connection_cb() gets scheduled in the other thread. The
locking/unlocking order of mutex_712570 requires:
• test_threaded_712570(): lock mutex
• test_threaded_712570(): start wait loop
• connection_cb(): lock mutex
• test_threaded_socket_service_finalize(): unlock mutex
• test_threaded_712570(): end wait loop
• test_threaded_712570(): unlock mutex
Fix that by quitting the main loop once connection_cb() has been called
(i.e. once the server thread has received the incoming connection
request), rather than just after the client thread (main thread) has
sent a connection request.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1679
On about 1 in 3 test runs, the socket-service would fail with the
ref_count assertion in connection_cb() failing (the ref_count would be 3
rather than the expected 2).
This was happening because the GTask from
g_socket_listener_accept_socket_async() now always takes at least one
main context iteration to return a result (whereas before
6f3d57d2ee it might have taken zero), but
the ref_count can drop below 3 before the process of returning a result
starts. During the process of returning a result, the ref_count
temporarily increases again, which is what was breaking the test.
Fix this by waiting for one more main context iteration. This is a bit
of a hack, but the real fix would be to expose the outstanding_accept
boolean from GSocketService as public API (which the test can
interrogate), and that seems too much like exposing internal state.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1679
Compilers get confused when variables are initialized by a function by
taking them as reference in an out argument; this, coupled with the fact
that C does not initialize variables by default, most commonly results
in a "maybe uninitialized" compiler warning.
When testing as root, changing the permissions of the keyfile will have
no effect on the writability since root bypasses these permissions. See
path_resolution(7). Skip the test in this case.
g_assert_*() give more informative error messages, and aren’t compiled
out when building with G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
getsockname() returns the address that the socket was bound to.
If it was bound to INADDR_ANY, getsockname() will stubbornly return INADDR_ANY
(and someport - that one is valid).
Subsequent connection attempts to INADDR_ANY:someport will fail with winsock.
Actually, it doesn't make even sense to connect to INADDR_ANY at all
(where is the socket connecting to? To a random interface of the host?),
so this is just a straight-up change, without platform-specific ifdefing.
Use loopback instead of INADDR_ANY. To ensure that binding and creation
of INADDR_ANY is still tested, use two addresses: bind to INADDR_ANY,
but connect to loopback, with the port number that we got from the bound
address.
The gsocketclient-slow test needs this, otherwise connect() succeeds
immeidately and the test fails, because it is checking that cancellation
works. We weren't installing it for installed tests.
It's necessary sometimes for installed tests to be able to run with a
custom environment. For example, the gsocketclient-slow test requires an
LD_PRELOADed library to provide a slow connect() (this is to be added in
a followup commit).
Introduce a variable `@env@` into the installed test template, which we
can override as necessary when generating `.test` files, to run tests
prefixed with `/usr/bin/env <LIST OF VARIABLES>`.
As the only test that requires this currently lives in `gio/tests/`, we
are only hooking this up for that directory right now. If other tests in
future require this treatment, then the support can be extended at that
point.
There's no /tmp directory on Windows.
Use g_get_tmp_dir(), and adjust the test to work with that.
The test *still* checks the basename of the new CWD, it just
doesn't need to be "tmp" anymore.
envp in spawn() functions is the *whole* environment table
for the child process. Including PATH. Thus, unless PATH is explicitly
put into that table, the process will be spawned without PATH.
Since on Windows binaries are found via PATH instead of LD_LIBRARY_PATH
or whatever, almost no program (unless installed in WINDIR, maybe)
can run without a PATH. Certainly not test programs - meson
adds bld subdirs to the PATH to make sure that test programs
use uninstalled glib at runtime.
So make sure that PATH is passed along.
Windows \r\n EOLs strike again. The test already knows about LINEEND,
so make it use LINEEND more (instead of swithcing pipes
to binary mode). This also applies to counting the bytes
read.
With winsock sending messages to NULL results in G_IO_ERROR_NOT_CONNECTED
instead of G_IO_ERROR_FAILED.
MSDN says:
WSAENOTCONN
10057
Socket is not connected.
A request to send or receive data was disallowed because the socket is not connected
and (when sending on a datagram socket using sendto) no address was supplied.
So this is a direct mapping of the implementation error.
Covering it up in the wrapper (by converting it to G_IO_ERROR_FAILED)
doesn't seem feasible or needed (no one, except for the testsuite,
really cares which unrecoverable error is returned by sendto()).
getaddrinfo() in winsock can't understand scope IDs.
There's no obvious way to fix that, short of re-implementing
that function, so disable that part of the test on Windows.
