OS X's getaddrinfo() only supports IPv6 scope IDs that are interface
names, not numbers. So use if_indextoname() to get the name of an
interface and construct an address using that.
https://bugzilla.gnome.org/show_bug.cgi?id=700123
Extents-based filesystems like knowing in advance how much data will be
written to a file in order to prevent fragmentation. If we have it, use
posix_fallocate() before writing data in g_file_set_contents().
https://bugzilla.gnome.org/show_bug.cgi?id=701560
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
See https://live.gnome.org/GnomeGoals/InstalledTests for more
information.
The tests now support being run both uninstalled and installed, so
'make check' works for those who want it. For tests which need data
files, the way this works is they look in the compiled in value of
SRCDIR by default, and the generated tests use "env G_TEST_DATA=" to
override that.
This patch only converts glib/tests for now; if this patch looks good,
I'll do the rest of the tests.
https://bugzilla.gnome.org/show_bug.cgi?id=699079
This ancient code was attempting to cope with (unknown) systems whose
malloc() prototype was incompatible with the standard. This test was
fragile; it would break if the build environment provided -Wall in
CFLAGS.
Now that it's 2013, let's assume that target systems have a sane
malloc(). If someone complains, we can revisit this.
https://bugzilla.gnome.org/698716
Some (broken) toolchains for example trip up
-Werror=missing-prototypes in system headers. This patch allows
people to skip the formerly hardcoded "baseline" warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=694757
Some compilers have support for atomic operations, but do not
define __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4. Instead of checking
for this define, we check for __sync_bool_compare_and_swap and
define __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4 if the compiler doesn't
define it.
https://bugzilla.gnome.org/show_bug.cgi?id=682818
gio's glib-mkenums call needs to get gnetworking.h out of $(builddir),
not $(srcdir). Fix/simplify it by using $(filter) on $^ and letting
make find everything.
Also add -Wno-portability to AM_INIT_AUTOMAKE in configure.ac, so that
it doesn't warn about this (or about the gmake-specific features we
were already using in gio/tests/)
https://bugzilla.gnome.org/show_bug.cgi?id=691866
We only want to control the default visibility for our five main
installable libraries: libglib, libgthread, libgmodule, libgobject,
libgio. We should therefore only set -fvisibility=hidden when building
those.
Use a separate substitution variable for this purpose.
Using CFLAGS directly leads to some modules built in testcases not
exporting their symbols (and then the tests fail). It also affects the
fam file monitoring module.
Colin had originally done it this way in his visibility patch series but
I failed to understand why so I didn't copy it. Now I do.
Also: revert changes made to two testcases in an attempt to work around
this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=691756
Check for -fvisibility=hidden as a supported CFLAG.
If it is supported, use it and emit an AC_DEFINE to change the meaning
of _GLIB_EXTERN to include the GNU attribute for marking symbols as
public: __attribute((visibility("default"))).
This will override the public definition of _GLIB_EXTERN for any file
which does #include "config.h" (forcing all our .c files to do so, as a
side effect).
If we're on mingw, assume that -fvisibility will work and also throw in
a __declspec(dllexport) for good measure. This will allow us to move
away from using a .def file to create the the various DLLs.
It's possible that there may be compilers that accept
-fvisibility=hidden but don't accept the GNU attribute for making
symbols public again -- we will hopefully receive bugs if any of those
exist.
https://bugzilla.gnome.org/show_bug.cgi?id=688681
The attached patch adds support for the btrfs "clone" ioctl which
makes Copy-on-Write reflinks, resulting in cheap O(1) copies when
source/destination are on the same filesystem. The ioctl itself is
quite straightforward, and GNU coreutils has had support since 7.5
(--reflink=auto --sparse=auto).
The ioctl only operates on regular files and symlinks, and always
follows symlinks; checks have been added accordingly.
This patch would be very useful for everyone who uses btrfs
filesystems (Meego folks for instance). On systems that don't have
btrfs, or if the the source is not on a btrfs filesystem, the ioctl
returns EINVAL, and the fallback code is triggered. Hence this will
cause no problems for non-btrfs users.
https://bugzilla.gnome.org/show_bug.cgi?id=626497
In configure.ac, escaping '#' in NAMESER_COMPAT_INCLUDE results in the following gio/gnetworking.h, which obviously doesn't compile:
#include <arpa/inet.h>
#include <arpa/nameser.h>
\#include <arpa/nameser_compat.h>
https://bugzilla.gnome.org/show_bug.cgi?id=690346
Add g_socket_get_option() and g_socket_set_option(), wrapping
getsockopt/setsockopt for the case of integer-valued options. Update
code to use these instead of the underlying calls.
https://bugzilla.gnome.org/show_bug.cgi?id=623187
Install a public "gnetworking.h" header that can be used to include
the relevant OS-dependent networking headers. This does not really
abstract away unix-vs-windows however; error codes, in particular,
are incompatible.
gnetworkingprivate.h now contains just a few internal URI-related
functions
Also add a g_networking_init() function to gnetworking.h, which can be
used to explicitly initialize OS-level networking, rather than having
that happen as a side-effect of registering GInetAddress.
https://bugzilla.gnome.org/show_bug.cgi?id=623187
The gobject tools (glib-genmarshal and gobject-query) were linking
against libgthread. Stop that.
Also, remove the gthread_INCLUDES internal automake substitution.
Using "int main (int argc, char** argv)" in this test causes GCC to
issue two warnings about unused variable if CFLAGS envvar has
-Wunused-parameter (or just -Wextra). Those warnings are not related
to the attribute checking but they can make the test fail anyway.
As the project file format for Visual Studio 2012 is only slightly
different from Visual Studio 2010 projects, we can provide support for
building GLib (and other projects) with Visual Studio 2012 with relatively
little effort. This might change when we eventually get GLib to work with
the Windows 8 (Modern UI/formerly Metro) APIs, but this will suffice for
the time being for people needing to build GLib with Visual Studio 2012.
Basically all that needs to be done at 'make dist' is:
-Copy the .sln/.props/README.txt/.vcxproj files and replace the VS2010
stuff with VS2012 stuff
-Copy the .vcxproj.filters as is
Rather than defining _WIN32_WINNT only in a handful of files, define
it in config.h, like we do with _GNU_SOURCE.
(Also remove a "#define WIN32_LEAN_AND_MEAN" that isn't really all
that useful.)
https://bugzilla.gnome.org/show_bug.cgi?id=688109
Written by Dmitry Matveev as part of GSoC 2011:
http://netbsd-soc.sourceforge.net/projects/kqueue4gio/
This brings native file monitoring support on systems supporting kqueue(3)
(all BSDs) and remove the need to rely on the unmaintained gamin software.
The backend adds GKqueueDirectoryMonitor and GKqueueFileMonitor.
Some parts rewritten by myself (to prevent needing a configuration file).
Helpful inputs from Colin Walters and Simon McVittie.
https://bugzilla.gnome.org/show_bug.cgi?id=679793
This avoids collecting the zombie child, which means that the PID
can't be reused. This prevents possible race conditions that might
occur were one to send e.g. SIGTERM to a child.
This race condition has always existed due to the way we called
waitpid() for the app, but the window was widened when we moved the
waitpid() calls into a separate thread.
If waitid() isn't available, we return NULL, and consumers of this
private API (namely, GSubprocess) will need to handle that.
https://bugzilla.gnome.org/show_bug.cgi?id=672102
