Convert all the call sites which use `g_memdup()`’s length argument
trivially (for example, by passing a `sizeof()`), so that they use
`g_memdup2()` instead.
In almost all of these cases the use of `g_memdup()` would not have
caused problems, but it will soon be deprecated, so best port away from
it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2319
It may be defined by the environment (we document that as being allowed)
— if so, individual files should not try to redefine it, as that causes
a preprocessor warning.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The G_VALUE_NOCOPY_CONTENTS for strings can only be used when collecting them
and not when copying them.
Instead only avoid copies for strings that are interned.
Fixes#2141
This was mostly machine generated with the following command:
```
codespell \
--builtin clear,rare,usage \
--skip './po/*' --skip './.git/*' --skip './NEWS*' \
--write-changes .
```
using the latest git version of `codespell` as per [these
instructions](https://github.com/codespell-project/codespell#user-content-updating).
Then I manually checked each change using `git add -p`, made a few
manual fixups and dropped a load of incorrect changes.
There are still some outdated or loaded terms used in GLib, mostly to do
with git branch terminology. They will need to be changed later as part
of a wider migration of git terminology.
If I’ve missed anything, please file an issue!
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This adds support to be able to explicitely stored interned strings into
G_TYPE_STRING GValue.
This is useful for cases where the user:
* *knows* the string to be stored in the GValue is canonical
* Wants to know whther the string stored is canonical
This allows:
* zero-cost GValue copy (the content is guaranteed to be unique and exist
throughout the process life)
* zero-cost string equality checks (if both string GValue are interned, you just
need to check the pointers for equality or not, instead of doing a strcmp).
Fixes#2109
The glib-mkenums program allows generating code to handle enums/flags
with very different purposes. One of its purposes could be generating
per-enum/flag methods to be exposed in a library API, and while doing
that, it would be nice to have a way to specify in which API version
the enum/flag was introduced, so that the same version could be shown
in the generated API methods.
E.g. From the following code:
/**
* QmiWmsMessageProtocol:
* @QMI_WMS_MESSAGE_PROTOCOL_CDMA: CDMA.
* @QMI_WMS_MESSAGE_PROTOCOL_WCDMA: WCDMA.
*
* Type of message protocol.
*
* Since: 1.0
*/
typedef enum { /*< since=1.0 >*/
QMI_WMS_MESSAGE_PROTOCOL_CDMA = 0x00,
QMI_WMS_MESSAGE_PROTOCOL_WCDMA = 0x01
} QmiWmsMessageProtocol;
The template would allow us to generate a method documented like this,
including the Since tag with the value given in the mkenums 'since' tag.
/**
* qmi_wms_message_protocol_get_string:
* @val: a QmiWmsMessageProtocol.
*
* Gets the nickname string for the #QmiWmsMessageProtocol specified at @val.
*
* Returns: (transfer none): a string with the nickname, or %NULL if not found. Do not free the returned value.
* Since: 1.0
*/
const gchar *qmi_wms_message_protocol_get_string (QmiWmsMessageProtocol val);
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Making this validation code public allows projects to validate a
GParamSpec name before creating it. While hard-coded GParamSpec don't
need this, we can't afford crashing the main program for dynamically
generated GParamSpec from user-created data.
In such case, we will need to validate the param names and return errors
instead of trying to create a GParamSpec with invalid names.
Includes modifications from Philip Withnall and Emmanuele Bassi to
rearrange the new function addition and split it into one function for
GParamSpecs and one for GSignals.
When calling `g_set_object()` for a type derived from `GObject`, GCC 9.2
was giving the following strict aliasing warning:
```
../../source/malcontent/libmalcontent-ui/user-controls.c:1001:21: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
1001 | if (g_set_object (&self->user, user))
/opt/gnome/install/include/glib-2.0/gobject/gobject.h:744:33: note: in definition of macro ‘g_set_object’
744 | (g_set_object) ((GObject **) (object_ptr), (GObject *) (new_object)) \
| ^~~~~~~~~~
```
This was due to the `(GObject **)` cast.
Pass the pointer through a union to squash this warning. We already do
some size and type checks of the dereferenced type, which should catch
casual errors. The `g_object_ref()` and `g_object_unref()` calls which
subsequently happen inside the `g_set_object()` function also do some
dynamic type checks.
Add a test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
While we automatically define cleanup functions for the module, we don't
do it for the module class.
This will allow to manage the ownership of the class when reffing it
without having to cast it to GTypeClass.
It provides more useful output on failure, and isn’t compiled out when
building with `G_DISABLE_ASSERT`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It provides more useful output on failure, and isn’t compiled out when
building with `G_DISABLE_ASSERT`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This will allow subsequent testing of property name canonicalisation.
This test introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #358
Rather than adding a canonicalised and non-canonicalised version of the
signal to `g_signal_key_bsa`, just add the canonicalised version. Signal
lookups always use the canonicalised key (since the previous commit).
This saves space in `g_signal_key_bsa`, which should speed up lookups;
and it saves significant space in the global `GQuark` table (a 9.6%
reduction in entries in that table, by a rough test using
gnome-software).
We have to be a little more relaxed on the signal name validation than
we are for property name validation, as GTK installs a
`-gtk-private-changed` signal which violates the signal naming rules.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Rather than interning a property name string which isn’t canonicalised,
canonicalise it first, and enforce stricter validation on inputs.
The previous code was not incorrect (since the property machinery would
have canonicalised the property names itself, internally), but would
have resulted in non-canonical property names getting into the GQuark
table unnecessarily. With the new code, the interned property names from
property installation time should be consistently reused.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #358
Inline with the stricter version of the property naming rules from the
documentation, tighten up the validation of property names at
installation time.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It provides more useful output on failure, and isn’t compiled out when
building with `G_DISABLE_ASSERT`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The documentation says that parameter names must be alphanumeric (plus
`-` or `_`) and that canonicalisation turns `_` into `-`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #358
The static analyser can’t yet work out how `g_autofree` works, so
disable those tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1767
The Python runtime is not amenable to Valgrind, and leak checking is a
lot less relevant in Python compared to C.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #487
The two test scripts actually assumed some *NIX paradigms, so we need
to adapt them so that they can work on Windows as well, the changes are
namely:
-Call the glib-mkenums and glib-genmarshal Python scripts with the
Python interpreter, not just relying on shebang lines, on Windows.
This is because the native Windows console (cmd.exe) does not support
shebang lines, for subprocess.run().
-Use NamedTemporaryFile with delete=False, otherwise Windows cannot find
the temp files we need when running the tests.
-Use universal_newlines=True for subprocess.run() so that we do not need
to worry out line ending differences on different systems.
-Make sure we are not in the temp directories we create, where the tests
are being run, upon cleanup. Windows does not like deleting
directories that we are currently in.
On Windows and possibly other platforms the '%p' printf modifier does
not prefix printed values with '0x', so do not expect the warning
message to contain the '0x' prefix for the handler pointer value.
When building a valist marshaller, we can avoid reffing a GParamSpec
if the argument is known to always be static. The marshaller we ship in
`gmarshal.c` got this right, but marshallers generated by
glib-genmarshal were missing the optimisation. Fix that, and add a unit
test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1792
When building a valist marshaller, we can avoid a string copy if the
argument is known to always be static. The marshaller we ship in
`gmarshal.c` got this right, but marshallers generated by
glib-genmarshal were missing the optimisation. Fix that, and add a unit
test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1792
The old (Perl) implementation of glib-genmarshal used
g_variant_ref_sink() to correctly handle floating inputs; the Python
version should do the same.
Includes a unit test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1793
This is a basic test suite for the `glib-genmarshal` utility, lifted
mostly directly from the tests for `glib-mkenums`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This makes the Meson build code for it a little more generic, and adds
support for installed tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
While this was useful for local testing while developing the test, it’s
not widely applicable. Look the binary up in the current `${PATH}` if
it’s not specified using `G_TEST_BUILDDIR`.
This is needed to get the `mkenums.py` test working as an
installed-test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
We already have the GType with which the GValue should be initialized,
so requiring an initialized GValue is not really necessary, and it
actually complicates code that wraps GObject, by requiring the retrieval
of the GParamSpec in order to get the property type. Additionally, it
introduces a mostly unnecessary g_value_reset().
We already changed g_object_getv() to allow passing uninitialized
GValues, but this fell through the cracks.
Closes: #737
These have all been documented as deprecated for a long time, but we’ve
never had a way to programmatically mark them as deprecated. Do that
now.
This is based on the list of deprecations from the reverted commit
80fcb1bc2.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #638
In order to allow GLib itself to be built with G_DISABLE_ASSERT defined,
we need to explicitly undefine it when building the tests, otherwise
g_test_init() turns into an abort.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1708
The threads used to iterate at least 10000 times before setting the
"seen thread" flag to true. After porting they inadvertently did that
in the first iteration.
Previously, the test assumed that thread1 and thread2 would be scheduled
enough to set seen_thread{1,2} by the fact that the test runs for a high
number of iterations. On some platforms/schedulers, that’s not true,
which causes the test to spuriously fail.
Fix that by forcing the test to continue iterating until both threads
are seen. If this takes too long, the Meson test runner timeout will be
hit and the test will be terminated.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
