If the first power-profile installed test fails (for example, because
xdg-desktop-portal isn’t available), correctly tear down the dbusmock
object, or it will cause setUp() to fail when the next test in the suite
is run.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2481
When first creating the monitor, correctly set its property value to the
value from the portal, rather than waiting for the portal value to
change to set it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2481
We were lucky that this worked in some cases (the test is racy), but we
should actually run the condition check each loop, rather than when the
function is called.
Spotted by Martin Pitt:
96a8c02d24 (r54773831)
The modification time test creates a file, gets the modification time in
seconds, then gets the modification time in microseconds and assumes
that the difference between the two has to be above 0.
As rare as this may be, it can happen:
$ stat g-file-info-test-50A450 -c %y
2021-07-06 18:24:56.000000767 +0100
Change the test to simply assert that the difference not negative to
handle this case.
These were missing from the test before the previous commit ported from
`GMainLoop` to `GMainContext`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It makes combination exit conditions a lot easier than when using
`g_main_loop_quit()` from different callbacks.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
WebKit wants these private key properties to be readable in order to
implement a deserialization function. Currently they are read-only
because at the time GTlsCertificate was originally designed, the plan
was to support PKCS#11-backed private keys: private keys that are stored
on a smartcard, where the private key is completely unreadable. The
design goal was to support both memory-backed and smartcard-backed
private keys with the same GTlsCertificate API, abstracting away the
implementation differences such that code using GTlsCertificate doesn't
need to know the difference.
The original PKCS#11 implementation was never fully baked and at some
point in the past I deleted it all. It has since been replaced with a
new implementation, including a GTlsCertificate:private-key-pkcs11-uri
property, which is readable. So our current API already exposes the
differences between normal private keys and PKCS#11-backed private keys.
The point of making the private-key and private-key-pem properties
write-only was to avoid exposing this difference.
Do we have to make this API function readable? No, because WebKit could
be just as well served if we were to expose serialize and deserialize
functions instead. But WebKit needs to support serializing and
deserializing the non-private portion of GTlsCertificate with older
versions of GLib anyway, so we can do whatever is nicest for GLib. And I
think making this property readable is nicest, since the original design
reason for it to not be readable is now obsolete. The disadvantage to
this approach is that it's now possible for an application to read the
private-key or private-key-pem property, receive NULL, and think "this
certificate must not have a private key," which would be incorrect if
the private-key-pkcs11-uri property is set. That seems like a minor
risk, but it should be documented.
On Unix platforms, wait() and friends yield an integer that encodes
how the process exited. Confusingly, this is usually not the same as
the integer passed to exit() or returned from main(): conceptually it's
an integer encoding of this tagged union:
enum { EXITED, SIGNALLED, ... } tag;
union {
int exit_status; /* if EXITED */
struct {
int terminating_signal;
bool core_dumped;
} terminating_signal; /* if SIGNALLED */
...
} detail;
Meanwhile, on Windows, wait statuses and exit statuses are
interchangeable.
I find that it's clearer what is going on if we are consistent about
referring to the result of wait() as a "wait status", and the value
passed to exit() as an "exit status".
GSubprocess already gets this right: g_subprocess_get_status() returns
the wait status, while g_subprocess_get_exit_status() genuinely returns
the exit status. However, the GSpawn family of APIs has tended to
conflate the two.
Confusingly, g_spawn_check_exit_status() has always checked a wait
status, and it would not be correct to pass an exit status to it; so
let's deprecate it in favour of g_spawn_check_wait_status(), which
does the same thing that g_spawn_check_exit_status() always did.
Code that needs backwards-compatibility with older GLib can use:
#if !GLIB_CHECK_VERSION(2, 69, 0)
#define g_spawn_check_wait_status(x) (g_spawn_check_exit_status (x))
#endif
Signed-off-by: Simon McVittie <smcv@collabora.com>
Confusingly, g_spawn_check_exit_status() takes a wait status, not an
exit status, so passing g_subprocess_get_exit_status() to it is
incorrect (although both encodings happen to use 0 to encode success
and a nonzero value to encode failure, so in practice this probably
had the desired effect).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Following on from the previous commit, some explicit
`g_main_context_wakeup()` calls were missing from the test code which
only uses `GMainContext`.
Add them, and also add some assertions to check that these functions are
being called in the expected thread (as the code comments say).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This is a bit of a compromise. Since the option parsing in
`GApplication` is built on `GOptionContext`, there’s no way to
reliably indicate that a given option was passed by the user, other than
by its value changing. If the default value is zero, but the user
explicitly passed zero, nothing changes, so it’s not obvious that the
option was explicitly provided.
When just `GOptionContext` is being used, this is fine, as that’s
obvious what will happen from the way the API is built. With
`GApplication::handle-local-options`, though, the `GVariantDict`
provided by GLib to the callback claims to only contain the values of
the options provided by the user, and no defaults.
It’s not actually possible for GLib to do that reliably.
Previously, GLib was dropping all numeric values which were zero valued
(i.e. the defaults), as they *could* have been the defaults. It seems
like a slightly better behaviour to instead *not* drop those numeric
values, and err on the side of reporting some defaults as user-provided
(even if they weren’t) rather than dropping some user-provided values
which happen to be the defaults.
This adds a test for the case of parsing a double; the cases for
integers are analogous.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2329
The tests in `gdbus-names.c` use a mixture of `GMainLoop` and iterating
a `GMainContext` directly. Some of the helper functions based around the
`OwnNameData` struct use the `loop` `GMainLoop` even when called from
tests like `watch_with_different_context()` which themselves use
`GMainContext` directly.
Thus, it’s possible for the `GMainLoop` to not be running, while the
test is iterating on `g_main_context_iteration()`. In this case,
`g_main_loop_quit()` is a no-op and will not wake up the `GMainContext`.
This causes the test to livelock in around 1 in 1200 test runs.
Fix this by adding an explicit `g_main_context_wakeup()` call after each
`g_main_loop_quit()` call. A more comprehensive fix would be to port all
the tests in this file to iterating `GMainContext` directly, and drop
all the `GMainLoop` usage, but I don’t have time for that right now.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Relax the requirement for the test to only be compiled/run under gcc,
since a version of LLVM was released which supports `--add-symbol`.
`objcopy` should be overrideable to be `llvm-objcopy` by using a machine
file as per https://mesonbuild.com/Machine-files.html#binaries.
Suggested and tested by Grigory Vasilyev.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2423
Since commit 87e19535fe, the ETag check when writing out a file through
a symlink (following the symlink) has been incorrectly using the ETag
value of the symlink, rather than the target file. This is incorrect
because the ETag should represent the file content, not its metadata or
links to it.
Fix that, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2417
This changeset exposes
* `not-valid-before`
* `not-valid-after`
* `subject-name`
* `issuer-name`
on GTlsCertificate provided by the underlying TLS Backend.
In order to make use of these changes,
see the related [glib-networking MR][glib-networking].
This change aims to help populate more of the [`Certificate`][wk-cert]
info in the WebKit Inspector Protocol on Linux.
This changeset stems from work in Microsoft Playwright to [add more info
into its HAR capture][pw] generated from the Inspector Protocol events
and will bring feature parity across WebKit platforms.
[wk-cert]: 8afe31a018/Source/JavaScriptCore/inspector/protocol/Security.json
[pw]: https://github.com/microsoft/playwright/pull/6631
[glib-networking]: https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/156
Include the base URI in the `g_test_bug()` calls instead. This resolves
inconsistencies between the old bug base (bugzilla.gnome.org) and the
new bug base (gitlab.gnome.org). It also has the advantage that the URI
passed to `g_test_bug()` is now clickable in the code editor, rather
than being split across two locations.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/275#note_303175
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gio/tests/unix-streams.c: In function ‘test_write_async_wouldblock’:
gio/tests/unix-streams.c:692:17: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
692 | for (i = 0; i < 4 * pipe_capacity; i++)
| ^
gio/tests/unix-streams.c: In function ‘test_writev_async_wouldblock’:
gio/tests/unix-streams.c:780:17: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
780 | for (i = 0; i < 4 * pipe_capacity; i++)
| ^
An application that has been shut down is still marked as registered
even if its implementation has been already destroyed.
This may lead to unguarded crashes when calling functions that have
assumptions for being used with registered applications.
So, when an application is registered, mark it as unregistered just
before destroying its implementation and after being shut down, so that
we follow the registration process in reversed order.
Added tests
gio/tests/socket-common.c: In function ‘socket_address_from_string’:
gio/tests/socket-common.c:50:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
50 | for (i = 0; i < G_N_ELEMENTS (unix_socket_address_types); i++)
| ^
gio/tests/gnotification-server.c: In function ‘g_notification_server_bus_acquired’:
gio/tests/gnotification-server.c:224:3: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘const struct _GDBusInterfaceVTable’}
224 | };
| ^
gio/tests/gdbus-proxy.c: In function ‘strv_equal’:
gio/tests/gdbus-proxy.c:158:32: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
158 | res = g_strv_length (strv) == count;
| ^~
gio/tests/gsettings.c: In function ‘strv_set_equal’:
gio/tests/gsettings.c:2268:41: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
2268 | res = g_strv_length ((gchar**)strv) == count;
| ^~
gio/tests/gdbus-testserver.c:806:1: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘const struct _GDBusInterfaceVTable’}
806 | };
| ^
In file included from gio/gio.h:53,
from gio/tests/gdbus-testserver.c:1:
gdbusconnection.h:395:12: note: ‘padding’ declared here
395 | gpointer padding[8];
| ^~~~~~~
gio/tests/gdbus-testserver.c: In function ‘handle_method_call’:
gio/tests/gdbus-testserver.c:334:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
334 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:343:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
343 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:352:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
352 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:361:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
361 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:370:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
370 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:379:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
379 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:388:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
388 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:397:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
397 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:406:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
406 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/mimeapps.c: In function ‘strv_equal’:
gio/tests/mimeapps.c:31:32: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
31 | res = g_strv_length (strv) == count;
| ^~
gio/tests/proxy-test.c: In function ‘do_echo_test’:
gio/tests/proxy-test.c:855:25: error: comparison of integer expressions of different signedness: ‘gssize’ {aka ‘long int’} and ‘gsize’ {aka ‘long unsigned int’}
855 | for (total = 0; total < nwrote; total += nread)
| ^
gio/tests/file.c: In function ‘written_cb’:
gio/tests/file.c:358:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘size_t’ {aka ‘long unsigned int’}
358 | if (data->pos < strlen (data->data))
| ^
gio/tests/gdbus-test-codegen.c: In function ‘check_object_manager’:
gio/tests/gdbus-test-codegen.c:2344:20: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘int’
2344 | if (om_signal_id != -1)
| ^~
gio/tests/testfilemonitor.c: In function ‘check_expected_events’:
gio/tests/testfilemonitor.c:124:39: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
124 | for (i = 0, li = 0, l = recorded; i < n_expected && l != NULL;)
| ^
gio/tests/socket.c: In function ‘test_get_available’:
gio/tests/socket.c:1696:53: error: comparison of integer expressions of different signedness: ‘gssize’ {aka ‘long int’} and ‘long unsigned int’
1696 | if (g_socket_get_available_bytes (server) > sizeof (data))
| ^
gio/tests/gdbus-export.c:130:1: error: missing initializer for field ‘properties’ of ‘GDBusInterfaceInfo’ {aka ‘const struct _GDBusInterfaceInfo’}
130 | };
| ^
In file included from gio/gio.h:57,
from gio/tests/gdbus-export.c:21:
gio/gdbusintrospection.h:156:25: note: ‘properties’ declared here
156 | GDBusPropertyInfo **properties;
| ^~~~~~~~~~
...
gio/tests/actions.c: In function ‘strv_set_equal’:
gio/tests/actions.c:177:41: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
177 | res = g_strv_length ((gchar**)strv) == count;
| ^~
gio/tests/actions.c: In function ‘test_parse_detailed’:
gio/tests/actions.c:473:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
473 | for (i = 0; i < G_N_ELEMENTS (testcases); i++)
| ^
gio/tests/actions.c: In function ‘test_entries’:
gio/tests/actions.c:375:5: error: missing initializer for field ‘parameter_type’ of ‘GActionEntry’ {aka ‘const struct _GActionEntry’}
375 | { "foo", activate_foo },
| ^
In file included from gio/gio.h:31,
from gio/tests/actions.c:1:
gio/gactionmap.h:63:16: note: ‘parameter_type’ declared here
63 | const gchar *parameter_type;
| ^~~~~~~~~~~~~~
...
gio/tests/gdbus-peer-object-manager.c: In function ‘mock_interface_get_vtable’:
gio/tests/gdbus-peer-object-manager.c:111:3: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘struct _GDBusInterfaceVTable’}
111 | };
| ^
gio/tests/network-address.c: In function ‘main’:
gio/tests/network-address.c:1194:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1194 | for (i = 0; i < G_N_ELEMENTS (host_tests); i++)
| ^
gio/tests/network-address.c:1201:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1201 | for (i = 0; i < G_N_ELEMENTS (uri_tests); i++)
| ^
gio/tests/network-address.c:1208:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1208 | for (i = 0; i < G_N_ELEMENTS (address_tests); i++)
| ^
gio/tests/network-address.c:1215:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1215 | for (i = 0; i < G_N_ELEMENTS (address_tests); i++)
| ^
gio/tests/gsubprocess.c: In function ‘test_communicate_async’:
gio/tests/gsubprocess.c:774:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
774 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_async’:
gio/tests/gsubprocess.c:1025:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1025 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_cancelled_async’:
gio/tests/gsubprocess.c:1058:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1058 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_async_invalid’:
gio/tests/gsubprocess.c:1202:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1202 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/converter-stream.c: In function ‘g_expander_converter_convert’:
gio/tests/converter-stream.c:128:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
128 | for (i = 0; i < block_size; i++)
| ^
gio/tests/converter-stream.c: In function ‘g_compressor_converter_convert’:
gio/tests/converter-stream.c:234:23: error: comparison of integer expressions of different signedness: ‘long int’ and ‘gsize’ {aka ‘long unsigned int’}
234 | if (in_end - in < block_size)
| ^
gio/tests/converter-stream.c:244:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
244 | for (i = 0; i < block_size; i++)
| ^
gio/tests/converter-stream.c:257:33: error: comparison of integer expressions of different signedness: ‘long int’ and ‘gsize’ {aka ‘long unsigned int’}
257 | if (v == 0 && in_end - in == block_size && (flags & G_CONVERTER_INPUT_AT_END) == 0)
| ^~
gio/tests/converter-stream.c: In function ‘test_expander’:
gio/tests/converter-stream.c:356:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
356 | for (i = 0; i < sizeof(unexpanded_data); i++)
| ^
gio/tests/converter-stream.c: In function ‘test_compressor’:
gio/tests/converter-stream.c:445:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
445 | for (i = 0; i < expanded_size; i++)
| ^
gio/tests/converter-stream.c:454:16: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
454 | g_assert (i == expanded_size -1);
| ^~
gio/tests/converter-stream.c: In function ‘test_converter_pollable’:
gio/tests/converter-stream.c:1077:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
1077 | for (i = 0; i < expanded_size; i++)
| ^
gio/tests/converter-stream.c:1086:16: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
1086 | g_assert (i == expanded_size -1);
| ^~
gio/tests/converter-stream.c: In function ‘main’:
gio/tests/converter-stream.c:1220:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1220 | for (i = 0; i < G_N_ELEMENTS (compressor_tests); i++)
| ^
gio/tests/converter-stream.c:1223:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1223 | for (i = 0; i < G_N_ELEMENTS (truncation_tests); i++)
| ^
gio/tests/converter-stream.c:1226:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1226 | for (i = 0; i < G_N_ELEMENTS (charset_tests); i++)
| ^
gio/tests/contenttype.c: In function ‘test_tree’:
gio/tests/contenttype.c:337:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
337 | for (i = 0; i < G_N_ELEMENTS (tests); i++)
| ^
gio/tests/contexts.c: In function ‘test_context_specific_emit’:
gio/tests/contexts.c:379:21: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint32’ {aka ‘int’}
379 | for (i = 0; i < g_test_rand_int_range (1, 5); i++)
| ^
gio/tests/contexts.c:383:55: error: comparison of integer expressions of different signedness: ‘int’ and ‘guint’ {aka ‘unsigned int’}
383 | while (g_atomic_int_get (&observed_values[i]) != n)
| ^~
gio/tests/contexts.c:387:41: error: comparison of integer expressions of different signedness: ‘gint64’ {aka ‘long int’} and ‘guint64’ {aka ‘long unsigned int’}
387 | if (g_get_monotonic_time () > expiry)
| ^
1) Check that schedule_call_in_idle code branch of gdbusnamewatching.c
is working to call vanished handler in the thread which had watched the name
2) Check cancellation of vanished handler if the name is unwatched before
vanished callback is dispatched.
Closes#2011
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
`""` is not a valid path (`stat()` on it returns `ENOENT`). Previously,
a full `GLocalFile` was being created, which ended up resolving to
`$CWD`, through path canonicalisation. That isn’t right.
Fix it by creating a `GDummyFile` instead, and adding a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2328
Calling `dlopen()` with `libutil.so` makes the installed tests depend on
having glibc's development files installed. To avoid this, we can work
out the runtime library name at build time and `dlopen` that instead.
This approach is [taken from libfprint][1], thanks to Marco Trevisan.
[1]: f401f399a8
`ENXIO` can be returned from `open(2)` for special files (FIFOs, device
files and domain sockets) which are not backed by anything.
This fixes the error returned by `g_file_replace()` when trying to
replace such a file, so that it now matches the documentation.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
These test all the functionality and combinations of flags I can think
of. They do not cover dynamic behaviour (for example, what would happen
if the source file is deleted by another process part-way through a call
to `g_file_replace()`).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The `G_FILE_CREATE_REPLACE_DESTINATION` flag is equivalent to unlinking
the destination file and re-creating it from scratch. That did
previously work, but in the process the code would call `open(O_CREAT)`
on the file. If the file was a dangling symlink, this would create the
destination file (empty). That’s not an intended side-effect, and has
security implications if the symlink is controlled by a lower-privileged
process.
Fix that by not opening the destination file if it’s a symlink, and
adjusting the rest of the code to cope with
- the fact that `fd == -1` is not an error iff `is_symlink` is true,
- and that `original_stat` will contain the `lstat()` results for the
symlink now, rather than the `stat()` results for its target (again,
iff `is_symlink` is true).
This means that the target of the dangling symlink is no longer created,
which was the bug. The symlink itself continues to be replaced (as
before) with the new file — this is the intended behaviour of
`g_file_replace()`.
The behaviour for non-symlink cases, or cases where the symlink was not
dangling, should be unchanged.
Includes a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2325
Since a following commit is going to add a new test which references
Gitlab, so it’s best to move the URI bases inside the test cases.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
For non-Linux UNIX systems, the label 'close_libutil:' in
'test_pollable_unix_pty()' will have no statement that goes with that
label. Just do a 'return' on non-Linux UNIX systems.
