Currently, the actual asynchronous work, represented by
asynchronous_cancellation_run_task, was over before the GCancellable
could be triggered. While that doesn't invalidate the purpose of the
test, since it's fundamentally about cancellation, it would be
nicer if the cancellation actually served some purpose instead of
being a mere formality.
https://gitlab.gnome.org/GNOME/glib/issues/1608
When calling g_socket_listener_accept_socket_async() on a
GSocketListener with multiple sockets, the accept_ready() callback is
called for the first incoming connection on each socket. It will return
success/failure for the entire accept_socket_async() GTask, and then
free the GSources for listening for incoming connections on the other
sockets in the GSocketListener. The GSources are freed when the GTask is
finalised.
However, if incoming connections arrive for multiple sockets within the
same GMainContext iteration, accept_ready() will be called multiple
times, and will call g_task_return_*() multiple times, before the GTask
is finalised. Calling g_task_return_*() multiple times is not allowed.
Propagate the first success/failure, as before, but then ignore all
subsequent incoming connections until the GTask is finalised.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Once cancelled, a GTask's callback should not only be invoked
asynchronously with respect to the creation of the task, but also with
respect to the GCancellable::cancelled handler. This is particularly
relevant in cases where the cancellation happened in the same thread
where the task is running.
Spotted by Dan Winship and Michael Catanzaro.
Closes https://gitlab.gnome.org/GNOME/glib/issues/1608
It needs investigating and fixing properly, but let’s not let it disrupt
the CI in the meantime.
Follow-up in https://gitlab.gnome.org/GNOME/glib/issues/1679.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
To make things consistent across the board as that is the WinSock2 error
code that is received by g_socket_send_message_with_timeout() when it
returns G_POLLABLE_RETURN_WOULD_BLOCK.
This never caused any problems because the default GSettingsBackend is
cached forever by GIOModule anyway.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
I was trying to debug some memory leaks in the gsettings test.
Eventually, it seems that actually they’re caused by the
GMemorySettingsBackend being cached by GIOModule — so this commit makes
no functional changes. It should make the code and documentation a bit
clearer though.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This mostly affects the 2.56 branch, but, given that GCC 9 is being
stricter about passing null string pointers to printf-like functions, it
might make sense to proactively fix such calls.
gdbusauth.c: In function '_g_dbus_auth_run_server':
gdbusauth.c:1302:11: error: '%s' directive argument is null
[-Werror=format-overflow=]
1302 | debug_print ("SERVER: WaitingForBegin, read '%s'",
line);
|
gdbusmessage.c: In function ‘g_dbus_message_to_blob’:
gdbusmessage.c:2730:30: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
2730 | tupled_signature_str = g_strdup_printf ("(%s)", signature_str);
|
The recent changes of the g_app_info_launch_default_for_uri_async()
function ensures that the callback is not called before DBus-activated
applications start. Let's use g_app_info_launch_default_for_uri_async()
and remove the workarounds for DBus-activated applications.
Closes: https://gitlab.gnome.org/GNOME/glib/issues/1249
The g_app_info_launch_uris_async() and g_app_info_launch_uris_finish()
functions are crucial to fix g_app_info_launch_default_for_uri_async()
to be really asynchronous.
This patch also adds GDesktopAppInfo implementation of that vfuncs.
The implementation may still use some synchronous calls to local MIME DB.
https://gitlab.gnome.org/GNOME/glib/issues/1347https://gitlab.gnome.org/GNOME/glib/issues/1249
In the writev() tests, the handling of cancellation is tested. However,
the GCancellable was cancelled after the writev_async() call was
started. Depending on the implementation of the writev() vfunc, the
operation could be done in a thread or in callbacks on the current
thread’s main loop. If done in a separate thread, there’s a chance that
enough of the write could happen before cancellation reaches that thread
that the overall operation returns success with a short write.
That would cause the test to fail, sometimes.
Avoid that by cancelling the GCancellable before starting the writev()
operation.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
It would always be initialized but initialize it to NULL to silence the
compiler, and also check that it is not NULL anymore when we expect it
to contain a valid value.
../gio/tests/desktop-app-info.c: In function ‘test_fallback’:
../gio/tests/desktop-app-info.c:191:18: warning: ‘app’ may be used uninitialized in this function [-Wmaybe-uninitialized]
g_assert_true (g_app_info_equal (info1, app));
^~~~~~~~~~~~~~~~
It could've never been uninitialized in this code but the code flow is
not obvious to the compiler. Initialize it to NULL and for clarity also
add an assertion that it is not NULL anymore on usage.
In file included from ../glib/glib.h:62,
from ../gobject/gbinding.h:28,
from ../glib/glib-object.h:23,
from ../gio/gioenums.h:28,
from ../gio/giotypes.h:28,
from ../gio/giomodule.h:28,
from ../gio/giomodule.c:25:
../gio/giomodule.c: In function ‘_g_io_module_get_default’:
../glib/gmessages.h:343:25: warning: ‘extension’ may be used uninitialized in this function [-Wmaybe-uninitialized]
#define g_debug(...) g_log (G_LOG_DOMAIN, \
^~~~~
../gio/giomodule.c:912:17: note: ‘extension’ was declared here
GIOExtension *extension, *preferred;
^~~~~~~~~
This allows returning WOULD_BLOCK without allocating a GError, and
should later be used for various functions of GPollableOutputStream,
GPollableInputStream and anything else that can potentially block.
Interpret the value "help" for environment variables that
are passed to _g_io_module_get_default(), and print the
names and priorities of available extensions.
This lets users explore what is available, and can be helpful
in figuring out why a certain extension was chosen as default.
It is similar in spirit to what we already do with environment
variables like G_DEBUG.
This is useful for debugging in many situations. It’ll be printed with
G_MESSAGES_DEBUG=GLib-GIO or G_MESSAGES_DEBUG=all.
Mostly I need it for debugging the default GNetworkMonitor, but it will
work for all GIO module implementations.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When we are in a sandboxed situation, bump the priority
of the keyfile settings backend above the dconf one,
so we use a keyfile inside the sandbox instead of requiring
holes in the sandbox for dconf.
Stacked databases and locks are dconf features that allow
management software like Fleet Commander to set system-wide
defaults and overrides centrally for applications.
This patch adds minimal support for the same to the keyfile
backend. We look for a keyfile named 'defaults' and a
lock-list named 'locks'.
Suitable files can be produced from a dconf database with
dconf dump and dconf list-locks, respectively.
The default location for these files is /etc/glib-2.0/settings/.
For test purposes, this can be overwritten with the
GSETTINGS_DEFAULTS_DIR environment variable.
Writes always go to the per-user keyfile.
Make it possible to instantiate a keyfile settings backend
without specifying parameters, by turning the arguments to
the new() function into construct-only properties. If no
filename is specified, default to
$XDG_CONFIG_HOME/glib-2.0/settings/keyfile
It needs investigating and fixing properly, but let’s not let it disrupt
the CI in the meantime.
Follow-up in https://gitlab.gnome.org/GNOME/glib/issues/1653.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
There's a race here, as revealed by Debian's buildds.
We call g_dbus_proxy_new() to create a proxy for the test server, with
callback proxy_ready() Then we call g_spawn_command_line_async() to
start the test server, and then start the main loop.
proxy_ready() assumes that the test server hasn't been started when it
is called. But there is no guarantee that these asynchronous operations
involving spawning a process won't happen in a different order that mean
the bus name *does* have an owner.
What we can do is move starting the server inside of proxy_ready(), so
we know that the test server isn't started until after the proxy is
created. We also add an assertion to check that it is indeed not running
before we execute it.
Rather than storing it as an invalid value in last_position, store it as
a separate boolean.
This introduces no functional changes, but should fix some warnings from
MSVC.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1500
If we can't find the mount point for target or tmp (as currently
happens on Launchpad autobuilders, and perhaps relatedly, on a
development system that uses btrfs), that's probably not great but is
not really the point of this test.
Signed-off-by: Simon McVittie <smcv@collabora.com>
In a minimal autobuilder environment, this test could conceivably be
the first thing to refer to ~/.local.
Modified by Iain Lane <laney@debian.org>: Don't try to create ~/.local
from tests, but skip if it doesn't exist.
Signed-off-by: Simon McVittie <smcv@collabora.com>
So long, and thanks for everything. We’re a Meson-only shop now.
glib-2-58 will remain the last stable GLib release series which is
buildable using autotools.
We continue to install autoconf macros for autotools-using projects
which depend on GLib; they are stable API.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Like for the OpenURI portal, O_PATH file descriptors do not prove access
to the underlying file data. I've used O_RDWR file descriptors here to
mirror the requested read/write permissions.
This change relates to https://github.com/flatpak/xdg-desktop-portal/issues/167
The OpenURI portal requires the caller to pass a file descriptor as
proof of access for local files. Old versions required this file
descriptor to use the O_PATH mode. However, this does not prove access
since you can create O_PATH descriptors for files that you can't read.
Since xdg-desktop-portal 1.0.1, regular file descriptors are also
accepted with O_PATH descriptors restricted to flatpaks for the
transition.
Check for over- and underflow when manipulating positions.
This makes the sequence
g_list_model_get_item (store, 0);
g_list_model_get_item (store, -1u);
return NULL for the second call, as it should.
Closes: #1639
Calling
g_list_model_get_item (store, 0);
g_list_model_get_item (store, -1u);
does not return NULL for the second call, as it should.
This was showing up in GTK+ list model tests.
Since commit 290bb0dd, where various members of GTask were converted to
a bitfield, some of the getters:
• g_task_get_check_cancellable()
• g_task_get_return_on_cancel()
• g_task_get_completed()
have been returning truthy ints (zero or an arbitrary non-zero integer)
as boolean values, rather than the canonical boolean ints of 1 and 0.
This broke the `yield` statement in Vala, whose generated C code
compares `g_task_get_completed (…) != TRUE`. i.e. Whether the
`completed` field has a value not equal to 1.
Fix this by explicitly converting truthy ints to canonical boolean ints
in all getters.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1636
Names are a message bus feature, so it does not make sense to connect
to NameOwnerChanged when the underlying connection is not a message
bus.
Moreover, g_dbus_connection_signal_subscribe() will also enforce that
condition. Adding this extra check here is helpful to avoid a critical
warning when using GDBusProxy with peer-to-peer connections.
https://gitlab.gnome.org/GNOME/glib/issues/1620
Right now this can only be set at construction but not read back.
That seems unnecessarily restrictive, and we'll need to read these
flags from outside of gdbusconnection.c in the next commit, so let's
just make it public.
https://gitlab.gnome.org/GNOME/glib/issues/1620
Add option to not encode resource data into the C source file
in order to embed the data using `ld -b binary`. This improves compilation
times, but can only be done on Linux or other platforms with a
supporting linker.
(Rebased by Philip Withnall, fixing minor rebase conflicts.)
Fixes#1489
This reverts commit 52bab0254a.
It silently conflicted with another commit,
90ca3b4dd0, which was merged later than
it. I’ve kept commit 90ca3b because it also frees the GError; 52bab
doesn’t.
This is my failure to rebase and test old branches before merging them,
instead of assuming that the lack of automatically detected merge
conflicts actually means there are no merge conflicts.
Allow any type of private key in PEM files by treating PEM guards ending
with "PRIVATE KEY-----" as a private key instead of looking for a
pre-defined set of PEM guards. This enables the possibility for custom
GTlsBackend to add support for new key types.
Test cases have been expanded to ensure PEM parsing works for private
key when either header or footer is missing.
Encrypted PKCS#8 is still rejected. Test case has been added for this to
ensure behaviour is the same before and after this change.
The `apps` subprocess is spawned by desktop-app-info to interpret the
forest of .desktop files, and its output is provided on stdout. If debug
output is mixed up with that output, tests which parse the output fail.
Disable the debug output from the subprocess to prevent this.
The new debug output appeared as a result of recent changes to the
desktop file dir monitoring code in gdesktopappinfo.c.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The appinfo-test.desktop file is set up with an Exec= path which points
to the compiled and installed appinfo-test utility. When running the
tests uninstalled, however, this might not be present, which causes
loading appinfo-test.desktop to fail.
Split appinfo-test.desktop in two: keep the existing
appinfo-test.desktop for tests which need to launch appinfo-test, and
add a new appinfo-test-static.desktop for tests which don’t launch
anything (and, for example, just inspect GAppInfo properties).
appinfo-test-static.desktop uses an Exec= line which should always be
present (`true`) so it should never fail to load.
Allow the tests using appinfo-test-static.desktop to be run uninstalled
or installed. Allow the tests using appinfo-test.desktop to be skipped
if loading appinfo-test.desktop fails, which is an indicator that the
test is running uninstalled.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This causes the desktop directory cache to be correctly reloaded between
unit tests if G_TEST_OPTION_ISOLATE_DIRS is in use.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This allows the list of directories which contain MIME data to be set,
separately from the list of directories returned by
g_get_user_data_home() and g_get_system_data_dirs().
While the latter are overridden for a unit test, we don’t have access to
the system MIME registry, which can sometimes be useful for tests which
need to know about standard MIME associations from shared-mime-info.
Allow g_content_type_set_mime_dirs() to be used from unit tests to allow
them to use the system MIME registry again, or to allow them to be
pointed to another custom registry.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In order to make xdgmime properly relocatable so that unit tests can use
it without it reading and modifying the user’s actual xdgmime files, and
without the need to call setenv() (and get tied up with thread safety
problems), add a xdg_mime_set_dirs() method to allow the dirs to be
overridden. They will still default to the values of $XDG_DATA_HOME and
$XDG_DATA_DIRS.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert() is for runtime code, and can be compiled out. g_assert_*()
cannot be compiled out, and give more helpful failure messages for
specific types.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test useless. The g_assert_*() functions provide more helpful feedback
on failure too.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
By encoding the path to the appinfo-test binary in the .desktop files,
we can avoid a chdir() call in the tests, which was a bit ugly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/538
This partially reverts commit 27b5fb5892.
The infrastructure for disabling a test is kept, but the appinfo and
desktop-app-info tests no longer need to be run serially.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1601
gtk-doc is unhappy that skeleton documentation comments had been written
for these functions (for the introspection annotations) but that the
documentation content was actually missing.
Add that content. I like a happy gtk-doc.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This partially reverts commit 799f8dcd46.
This patch seems to break the writability status of the server socket: once
somebody writes to it with success, then it reports it is not writable
anymore. Also, when the client socket has the flag FD_CONNECT set once,
it is never cleared and then it reports it is always writable, also when
it is not.
This checks if the stream is writable before writing
to it. If the write succeeded with no error, then the
stream has to be also writable after the write
Currently a new connection will not be attempted until the previous
one has timed out and as the current API only exposes a single
timeout value in practice it often means that it will wait 30 seconds
(or forever with 0 (the default)) on each connection.
This is unacceptable so we are now trying to follow the behavior
RFC 8305 recommends by making multiple connection attempts if
the connection takes longer than 250ms. The first connection
to make it to completion then wins.
As RFC 8305 recommends we can start multiple DNS queries in parallel
to more quickly make an initial response, especially when one is
particularly slow/broken.
This allows higher levels to have more control over resolving
(ipv4 or ipv6 for now) which allows for optimizations such
as requesting both in parallel as RFC 8305 recommends.
This means the output (including lists of filenames) does not depend on
the order of the input files, which may matter if this tool is invoked
with a glob or some other mechanism that doesn't guarantee an order.
Turns out the fix in commit 93555577c wasn't enough, when using glib as
subproject and the parent project uses only libgio_dep, and include
<gi18n.h>, it won't find libintl.h because it's in the
include_directories of libglib_dep. Fix that by declaring dependencies
explicitly, which is the right thing to do since glib and gobject are
public dependencies of gio. That reflects what we do for the pkg-config
file as well.
Previously, method and signal arguments were sorted by name, which
(assuming you don't happen to give your arguments
lexicographically-ordered names) means the generated signatures were
incorrect when there is more than 1 argument.
While sorting the methods and signals themselves (and properties, and
annotations on all these) is fine, it's easiest to not sort anything.
Since 1217b1bc4f, LICENSE_STR has taken two
parameters, not one. Without this change, running either mode fails
with a traceback like:
Traceback (most recent call last):
File "../gdbus-codegen", line 55, in <module>
sys.exit(codegen_main.codegen_main())
File ".../codegen_main.py", line 294, in codegen_main
gen.generate()
File ".../codegen.py", line 896, in generate
self.generate_body_preamble()
File ".../codegen.py", line 682, in generate_body_preamble
self.outfile.write(LICENSE_STR.format(config.VERSION))
IndexError: tuple index out of range
8916874ee6, which introduced these flags,
was actually merged after that commit, but I assume it was written
beforehand.
This is to ensure that the generated code is still compilable by the
running compiler, and see whether we can read the things in there
properly.
See issue #1580.
glib-compile-resources was updated to generate octal byte
representation in a string, but unfortunately this breaks the build
on Visual Studio when the generated string sequence exceeds 65535
characters, which is the imposed limit on Visual Studio compilers.
To make things work on Visual Studio builds and to not slow down things
on other compilers, generate a code path for Visual Studio an array of
octal byte representations, as well as a code path for other compilers
that use the new string representation of octal values, and let the
compiler take the appropriate code path when compiling the
generated code.
Fixes issue #1580.
While uniqueness is great, sometimes you want to restart
a newer version of the same app. These two flags make that
possible.
We also add a ::name-lost signal, that is emitted when it
happens. The default handler for this signal just calls
g_application_quit(), but applications may want to connect
and do cleanup or state-saving here.
When using glib as subproject we are forced to pass glib_dep,
gobject_dep and gio_dep to any build target. If we pass only gio_dep it
will missing include directory for glib and gobject.
Putting the raw URIs in the documentation comments would not link them,
and the ‘%20’s in the URIs were being parsed by gtk-doc as symbol
references. Fix that by using Markdown to format them correctly as
links.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Using `%` indicates that you’re linking to a symbol. In these cases we
wanted some nicely formatted literals, or a link to a specific property.
Use backticks for the literals, and link to the property fully.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Due to the line wrapping, gtk-doc was interpreting this second line as
redefining the @dbus_register documentation.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Otherwise they fill your real ~/.config/mimeapps.list with rubbish and
race for access to it. This is arguably not good.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1514
If a D-Bus interface was annotated with o.fd.DBus.Deprecated, then the
corresponding GObject property, in the common GInterface implemented
by the generated GDBusObjectProxies and GDBusObjectSkeletons, to
access the generated code for the D-Bus interface was not being marked
with G_PARAM_DEPRECATED, even though the gtk-doc snippet had the
'Deprecated: ' tag.
G_PARAM_DEPRECATED is older than gdbus-codegen, 2.26 and 2.30
respectively, hence it can be used unconditionally.
https://gitlab.gnome.org/GNOME/glib/merge_requests/485
If a D-Bus interface has a property that's annotated with
o.fd.DBus.Deprecated, then the corresponding GObject property was not
being marked with G_PARAM_DEPRECATED, even though the gtk-doc snippet
had the 'Deprecated: ' tag.
G_PARAM_DEPRECATED is older than gdbus-codegen, 2.26 and 2.30
respectively, hence it can be used unconditionally.
https://gitlab.gnome.org/GNOME/glib/merge_requests/485
Allowing unsafe rehandshakes used to be required for web compatibility,
but this is no longer a concern in 2018. So there should no longer be
compatibility benefits to calling this function. All it does is make
your TLS connection insecure.
Also, rehandshaking no longer exists at all in TLS 1.3.
At some point (maybe soon!) glib-networking will begin ignoring the
rehandshake mode, so let's deprecate it now.
Let's entirely deprecate calling this function for rehandshaking. The
current documentation is OK, but guarantees defined behavior (to attempt
a rehandshake) when TLS 1.2 is in use. But there's no way to force TLS
1.2, and also no way to check which version of TLS is in use. I really
should have deprecated use of this function for rehandshaking entirely
last time I updated it.
Fortunately, there should be no compatibility risk for existing code,
because rehandshaking has no visible effects at the API level.
With the changes to limit GVariant type nesting (commit 7c4e6e9fbe),
it’s now possible to have a valid type signature which is not a valid
GVariant type when enclosed in parentheses (to make it a tuple).
Check for that when parsing the signature field in a D-Bus message.
Includes a unit test.
oss-fuzz#11120
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This test is intended to verify the fix for
https://bugzilla.gnome.org/show_bug.cgi?id=787731, which was that
g_file_query_filesystem_info() would return stale information for the
mount. After replacing a read-only mount with a read-write mount, this
test used to only fail if G_FILE_ATTRIBUTE_FILESYSTEM_READONLY was TRUE
and yet the file could be opened for writing. In particular, if (due to
a test bug) the file really was still on a read-only filesystem, the
test would pass.
Now that we have fixed that bug in the test, we can make a stronger
assertion.
fusermount -z behaves like umount --lazy, which is documented thus:
> Detach the filesystem from the file hierarchy now, and clean up all
> references to this filesystem as soon as it is not busy anymore.
Without this, the call to `fusermount -u` often fails with:
/usr/bin/fusermount: failed to unmount /home/wjt/src/gnome/glib/_build/dir_bindfs_mountpoint: Device or resource busy
which causes the subsequent call to bindfs to fail:
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
It's not clear what is causing the mount to be busy. Inserting a
g_usleep (100 * 1000) before the calls to `fusermount -u` also works to
make the problem go away, but for the purposes of this test the
important point is that the mount is detached from the directory, for
which a lazy unmount is fine.
Fixes#1590.
In practice, fusermount -u often fails:
/usr/bin/fusermount: failed to unmount /home/wjt/src/gnome/glib/_build/dir_bindfs_mountpoint: Device or resource busy
which causes the subsequent calls to bindfs to fail:
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
This may or may not cause the current test run to fail, but it reliably
causes a repeat run of the test to fail. This change causes the current
run to fail instead.
I made a mistake when last updating the documentation in 94a99ae9. I
wrote that, with TLS 1.3, this would perform a rekey instead of a
rehandshake. In fact, that's only true for client connections. For
server connections, it's a no-op.
I was a bit nervous about how to document the behavior anyway, because
we really don't know what behavior will be reasonable with non-GnuTLS
crypto backends. This behavior is reasonable for the GnuTLS backend, but
might not necessarily make sense for OpenSSL. Ideally, we would
discourage API users from doing things which could have unexpected
effects, so instead of documenting what the GnuTLS backend does, I think
it'd be better to document that this is "undefined but not dangerous,"
since of course we want to make sure that existing code that doesn't
know about TLS 1.3 is not broken.
The docs sound like settings list is a thing, and
a ::children-changed signal exists. That is not the
case, and will never be the case at this point, so
stop pretending.
Closes: #1362
Currently, GDBusProxy:g-name-owner only notifies changes to the unique
name owner of the remote object in case the proxy was constructed for a
well-known name.
That sounds like an artificial restriction, and it's convenient to
connect to notify::g-name-owner if a proxy instance has already been
created for an unique name, instead of additionally using
g_bus_watch_name() to track the owner.
To fix this, always connect to NameOwnerChanged after the proxy is
initialized, instead of only doing so when the proxy was constructed for
a well-known name.
https://bugzilla.gnome.org/show_bug.cgi?id=791316https://gitlab.gnome.org/GNOME/glib/issues/1310
test_c_args is defined in the root meson.build with unfiltered list of
compiler flags, then redefined in gio/tests/meson.build after the
subdir() call. Move it before.
The length of the stolen data from a memory output stream is given by
get_data_size() — get_size() can be larger, and hence cause unnecessary
overallocation.
Similarly to g_source_set_name(), this sets a name on a GTask for
debugging and profiling. Importantly, this name is propagated to the
GSource for idle callbacks for the GTask, ending the glorious reign of
`[gio] complete_in_idle_cb`.
The name can be queried using g_task_get_name(). Locking is avoided by
only allowing the name to be set before the GTask is used from another
thread.
Includes tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This is the most degenerate possible test but it does exercise this code
path.
(Tweaked by Philip Withnall <withnall@endlessm.com> to also add the flag
to the autotools build.)
The executable depends only on the generated header file at compile
time, and on the library at link time. So meson can decide to compile
gdbus-peer.c before compiling the library and thus won't have generated
the header yet, causing the build error.
So declare_dependency() should only have the header file in its sources,
to force generating files before compiling gdbus-peer.c without
including objectmanager-gen.c into gdbus-peer's sources.
We use libgdbus_example_objectmanager_dep as dependency for various
tests, but this implies only a link dependency while it doesn't ensure
that the sources are generated.
Make this explicit
mntent-based implementation filter out mounts with device path that was
repeated. Consequently, it is not possible to show such mounts in UI even
with x-gvfs-show, because they are not returned from g_unix_mounts_get.
libmount-based implementation currently doesn't filter out any mounts
which causes issues to our volume monitors. Let's rather mark mounts
which don't point into fs root as system_internal. This approach won't be
affected by mount order as is mntent-based implementation. It will mark
more mounts as system_internal than it is filtered out with mntend-based
implementation, but there will be always possibility to show them in UI
over x-gvfs-show, which was not possible with mntend-based. We can
probably introduce some improvements later to not mark unique mounts as
system internal even if they don't point into fs root...
https://gitlab.gnome.org/GNOME/glib/issues/1271
Currently, there isn't API to determine root path for mounts created
over bind operation (or btrfs subvolumes). This causes issues to our
volume monitors if there is multiple mounts for one device, which can
happen with libmount-based implementation currently. Let's propagate
root path from libmount over g_unix_mount_get_root_path, so we can
handle this somehow in our volume monitors.
https://gitlab.gnome.org/GNOME/glib/issues/1271
Currently, readlink() is used only 12 times when expanding symlinks.
However, kernel uses 40 for this purpose and it is defined as MAXSYMLINKS.
Use that constant if available, or 40. See:
https://github.com/torvalds/linux/include/linux/namei.h.
find_mountpoint_for() uses current file in case of error, because
get_parent() returns NULL for error, but also if parent doesn't exist.
Return "." from get_parent() if parent doesn't exist in order to
differentiate the error state.
Test symlink expansion in find_mountpoint_for() function over
_g_local_file_find_topdir_for(). find_mount_for() is crucial for many
of glocalfile.c functionality (e.g. to determine correct trash location)
and symlink expansion has to work properly.
https://gitlab.gnome.org/GNOME/glib/issues/1522
These were callers which explicitly specified the string length to
g_utf8_validate(), when it couldn’t be negative, and hence should be
able to unconditionally benefit from the increased string handling
length.
At least one call site would have previously silently changed behaviour
if called with strings longer than G_MAXSSIZE in length.
Another call site was passing strlen(string) to g_utf8_validate(), which
seems pointless: just pass -1 instead, and let g_utf8_validate()
calculate the string length. Its behaviour on embedded nul bytes
wouldn’t change, as strlen() stops at the first one.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This introduces no real functional changes (except when compiling with
G_DISABLE_ASSERT, in which case it fixes the test). Mostly just a code
cleanup.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The code was checking whether the signature provided by the blob was a
valid D-Bus signature — but that’s a superset of a valid GVariant type
string, since a D-Bus signature is zero or more complete types. A
GVariant type string is exactly one complete type.
This meant that a D-Bus message with a header field containing a variant
with an empty type signature (for example) could cause a critical
warning in the code parsing it.
Fix that by checking whether the string is a valid type string too.
Unit test included.
oss-fuzz#9810
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Parsing a D-Bus message with the signature field in the message header
of type other than ‘g’ (GVariant type signature) would cause a critical
warning. Instead, we should return a runtime error.
Includes a test.
oss-fuzz#9825
Signed-off-by: Philip Withnall <withnall@endlessm.com>
G_FILE_ATTRIBUTE_ACCESS_CAN_TRASH can be set to a wrong value if
its parent dir is a symlink. This is because the find_mountpoint_for()
function tries to find mountpoint for a filepath and expands symlinks
only in parent dirs. But in this case the path is already parent dir
and needs to be expanded first...
Closes: https://gitlab.gnome.org/GNOME/glib/issues/1522
Fedora is using https://fedoraproject.org/wiki/Changes/Annobin
to try to ensure that all objects are built with hardening flags.
Pass down `CFLAGS` to ensure the SystemTap objects use them.
There were tests for invalid UTF-8 output when asynchronously
communicating with a subprocess, but nothing for synchronous
communication. Add such a test, and refine the code as a result.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Instead of sometimes returning a non-NULL buffer, always return NULL.
However, keep the documentation as explicitly returning undefined values
on failure, so that we can change the behaviour in future if needed.
The return values weren’t defined for failure before, so were
implicitly returning undefined values.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Put the core readlink() code into a separate
_g_win32_readlink_handle_raw() function that takes a file handle,
can optionally ensure NUL-terminatedness of its output
(for cases where we need a NUL-terminator and do *not* need
to get the exact contents of the symlink as it is stored in FS)
and can either fill a caller-provided buffer *or* allocate
its own buffer, and can also read the reparse tag.
Put the rest of readlink() code into separate
functions that do UTF-16<->UTF-8, strip inconvenient prefix
and open/close the symlink file handle as needed.
Split _g_win32_stat_utf16_no_trailing_slashes() into
two functions - the one that takes a filename and the one
that takes a file descriptor. The part of these functions
that would have been duplicate is now split into the
_g_win32_fill_privatestat() funcion.
Add more comments explaining what each function does.
Only g_win32_readlink_utf8(), which is callable from outside
via private function interface, gets a real doc-comment,
the rest get normal, non-doc comments.
Change all callers to use the new version of the private
g_win32_readlink_utf8() function, which can now NUL-terminate
and allocate on demand - no need to call it in a loop.
Also, the new code should correctly get reparse tag when the
caller does fstat() on a symlink. Do note that this requires
the caller to get a FD for the symlink, not the target. Figuring
out how to do that is up to the caller.
Since symlink info (target path and reparse tag) are now always
read directly, via DeviceIoControl(), we don't need to use
FindFirstFileW() anymore.
On Windows NTFS symlinks are implemented as reparse points,
which are special kinds of files *or directories*. A directory
symlink should link to a directory. A file symlink should link
to a file. Mismatching (such as a file symlink pointing to a
directory) produces symlinks that simply do not function.
Therefore GFileType file vs directory vs symlink distinction is
too simplistic to correctly represent a NTFS filesystem object type.
Since we can't turn back time and choose a better way of representing
file types, make GFileType reflect the file vs directory type on
Windows, meaning that all FS objects are either files or
directories (or shortcuts, which are also files), but never symlinks.
A test for symlinkiness will have to be made via GFileInfo - it
tracks symlinkiness separately from file/directory/whatever.
The st_nlink field of the stat structure has meaning and should
be put into GFileInfo.
The st_mode field is far less meaningful, but could still be used
for some purposes, adjust the comment to clarify that.
When using glib as a meson subproject on Windows the build currently fails
due to too long paths during the build process. See
https://github.com/mesonbuild/meson/issues/4226 for the upstream bug.
To work around the issue shorten the filenames of the generated gdbus files.
The tests were making assumptions about the order of the returned D-Bus
introspection nodes. However, these are semantically unordered and
changes to e.g. GHashTable would break the tests.
Fix this by applying a sort prior to validation.
There are a lot of gbooleans in the private GTask struct, which seems a
bit wasteful. Use a bitfield to compress the struct a bit.
This reduces the size of the struct from 216 bytes to 168 bytes on my
64-bit machine.
One of the fields needs to remain separate, since it’s used from a
TRACE() macro which calls typeof() on it.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
These functions already check to see if a successful result has already
been returned; expand them to also check to see if an error has been
returned.
We can’t just check GTask.result_set, as that’s actually an indicator
for whether the GTask.result member is filled — when
g_task_propagate_*() is called, it’s cleared again. We need a new state
bit.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1525
This method drops the last reference *it* owns to the GTask, but then
continues to call methods on the GTask. This wasn’t resulting in
failures because a ref in another thread kept the GTask alive, but
that’s quite dodgy.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The X-Flatpak-RenamedFrom key is used in .desktop files to identify past
names for the desktop file. It is defined to be a list of strings.
However, there was previously no correct way to retrieve a list of
strings from the GKeyFile wrapped by GDesktopAppInfo, short of
re-parsing the file with GKeyFile.
Note that doing something like:
g_strsplit (g_desktop_app_info_get_string (...), ";", -1)
is not correct: the raw value "a\;b;" represents the one-element list
["a;b"], but g_key_file_get_string() rejects the sequence "\;", and so
g_desktop_app_info_get_string() returns NULL in this case. (Of course, a
.desktop file with a semicolon in its name is a pathological case.)
Add g_desktop_app_info_get_string_list(), a trivial wrapper around
g_key_file_get_string_list(), similar to g_desktop_app_info_get_string()
and co.
The change from g_key_file_free() to g_key_file_unref() in the test is
needed because g_key_file_free() clears the contents of the keyfile.
This is fine for all the fields which are eagerly loaded and copied into
GDesktopAppInfo, but not when we want to access arbitrary stuff from the
keyfile.
This avoids the convenience library being treated as though it was
an installed static library (objects not included in the dependent
static library, and convenience library being listed in the pkg-config
metadata), both of which would make static linking impossible.
This is a workaround for meson not having
https://github.com/mesonbuild/meson/pull/3939 merged yet.
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/1536
Signed-off-by: Simon McVittie <smcv@collabora.com>
This makes it easier to debug test failures, by ensuring that g_debug()
and g_test_message() are printed as TAP diagnostics.
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/1528
Signed-off-by: Simon McVittie <smcv@collabora.com>
None of these files starts with a #! line, and they are not native
binary executables, so if a user attempts to execute them as a program,
Unix shells will run them as /bin/sh scripts. This is not going to end
well, since none of them are shell scripts (the gio bash completion
is for bash, which is not a lowest-common-denominator POSIX shell, and
in any case is designed to be sourced rather than executed).
Fixes: #1539
Signed-off-by: Simon McVittie <smcv@collabora.com>
These keep on taking just longer than 30s on my local machine when run
in parallel with the rest of the tests (i.e. with `ninja test`). Testing
them individually, they do terminate correctly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_icon_new_for_string() docs states that it should return a single name
when created with a single name. I add a second condition to this case:
the themed icon must not include default fallbacks (i.e. it must not
have been created with `g_themed_icon_new_with_default_fallbacks()`).
Otherwise the return value of `g_icon_new_for_string()` would not
recreate the same icon list when passed to `g_icon_new_for_string()`
(which would be another documentation inconsistency).
g_icon_new_for_string() is now back to old behavior for this specific
case.
I also revert the unit test for this case, and add a new unit test when
using g_themed_icon_new_with_default_fallbacks() with a single name as
well.
Closes#1513.
Currently this function calls `g_warning()` explicitly. It would be
nicer to properly propagate these failure up to the caller that tried to
initialise us.
`read_netlink_messages()` is the callback attached to the netlink socket
(G_IO_IN). It calls `g_socket_receive_message()`. There is a race
condition that if the socket is closed while there is a pending call, we
will try to receive on a closed socket, which fails.
To avoid this, we switch the order of the operations around: first
destroy the source and then close the socket.
This is not a correct way to check if `g_socket_new_from_fd()` failed.
Instead just see if it returned `NULL` itself.
This was preventing the netlink monitor from being initialised.
Closes#1518
All the other initialisation failure paths set a GError, but this one
didn’t. Set a GError to avoid breaking the invariant that returning
FALSE should always have a GError set.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1523
This is a speculative fix for epiphany#533, which we think might be
caused by xdg-desktop-portal not ever being started. This service is
started on-demand, not automatically.
1) Remove the non-Windows-only condition for subdir('tests').
2) Add libiphlpapi, libws2_32 and libsecur32 deps, needed for W32 tests.
3) Remove the -no-undefined argument (gcc doesn't understand it,
it *does* understand -Wl,-no-undefined; either way, the test
compiles without this argument just fine; maybe meson adds it
by itself - you can hardly build shared modules without it).
4) Add or fix a number of includes
5) Disable gdbus-objectmanager tests when building with MSVC
(right now these tests don't work on Windows anyway, so the fact
that MSVC can't even build them properly is irrelevant;
most likely gdbus-codegen needs changes to put _GLIB_EXTERN
before each function)
G_FILE_ATTRIBUTE_DOS_IS_MOUNTPOINT allows mountpoints
(NTFS reparse points with IO_REPARSE_TAG_MOUNT_POINT tag) to
be told apart from symlinks (NTFS reparse points with
IO_REPARSE_TAG_SYMLINK tag), even though both are reported
by glib as "symlinks".
G_FILE_ATTRIBUTE_DOS_REPARSE_POINT_TAG allows the exact
reparse tag value to be obtained by the user. This way
even more exotic reparse points can be identified and
handled by the user (glib itself currently has no code
to work with any reparse points that are not symlinks
or mountpoints).
The existing code was generating code with undefined results that modern compilers warn about:
accounts-generated.c:204:23: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
(GDBusArgInfo **) &_accounts_accounts_method_info_list_cached_users_OUT_ARG_pointers,
It wasn’t being tested. It should behave the same as
g_list_model_get_item(), so write a wrapper for the two.
This brings the code coverage of glistmodel.c up to 100%.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When setting the GListStore:item-type property we need to check the
GType is a GObject (or subclass). There was some explicit code for this,
but when actually testing it and looking at the code coverage, it turns
out that the GObject property type check coming from
g_param_spec_gtype() does everything we want, and the custom
g_critical() can never be hit. So turn it into an assertion.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This is also faster, though I doubt anyone's able to measure it.
The previous code was a more complicted way to do the same thing and it
was likely written the more complicated way because it fell out commit
758d7073a9 when fixing
https://bugzilla.gnome.org/show_bug.cgi?id=795307
There are many cases where a default TLS database is not able to be
defined within the constraints of a system. For example glib-networking
(or glib-openssl) cannot retrieve the default certificate store on iOS
or Android and need to be initialized from a cert file of certificates
bundled with the application.
Previously GStreamer was relying on a custom patch to glib-networking to
populate the default database from the file pointed to by the
CA_CERTIFICATES environment variable however the mechanism that enabled
this was recently remove from glib-networking.
Adding a more generic g_tls_backend_set_default_database() API allows
application developers to override the default database using their own
certificates as well as allowing equivalent functionality on Android/iOS
(or others) as on the default database handling Linux.
Fixes https://gitlab.gnome.org/GNOME/glib-networking/issues/35
The ::network-changed signal is documented to indicate any change in
network configuration, which doesn't necessarily imply a property
change - additional services becoming available after connecting to
a VPN comes to mind for instance.
In order to match the "native" network monitor's behavior, always
emit the signal when it's in response to the 'changed' D-Bus signal.
Also emit the signal unconditionally when loading the initial property
values, to allow clients to differentiate between "offline" meaning
"offline" and "offline" meaning "uninitialized".
With 0d685b4946, we now encode resource
data as a string. Strings have trailing nul terminators. A C compiler
will happily ignore the fact that the nul terminator exceeds the stated
array length, and will drop it — but a C++ compiler won’t, and will
raise:
error: initializer-string for array of chars is too long [-fpermissive]
Fix that by increasing the array length by 1, and subtracting it again
in the GStaticResource struct.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This reverts commit 3c1902fcf9.
This was accidentally re-added from an old version of the branch before
!265 was merged. It should not have been re-added.
