There were a couple of functions in `GDBusConnection` which take a
`user_data` argument, but which then leak it if they error out early.
A true positive spotted by scan-build!
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
The source language of GLib is technically en-US, so we should
consistently use en-US spellings.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3269
g_file_copy_async() and g_file_move_async() are written in a way that is
not bindable with gobject-introspection. The progress callback data can
be freed once the async callback has been called, which is convenient
for C, but in language bindings the progress callback closure is
currently just leaked.
There is no scope annotation that fits how the progress callback should
be treated:
- (scope call) is correct for the sync versions of the functions, but
incorrect for the async functions; the progress callback is called
after the async functions return.
- (scope notified) is incorrect because there is no GDestroyNotify
parameter, meaning the callback will always leak.
- (scope async) is incorrect because the callback is called more than
once.
- (scope forever) is incorrect because the callback closure could be
freed after the async callback runs.
This adds g_file_copy_async_with_closures() and
g_file_move_async_with_closures() for the benefit of language bindings.
See: GNOME/gjs#590
This is an introspection-friendly version of g_settings_bind_with_mapping.
Having two callbacks that share the same user data is not supported by
girepository, so the existing function is not introspectable.
Closes: #564
These consistently fail on scheduled CI runs, which is not helping our
ability to catch Hurd regressions.
For example, https://gitlab.gnome.org/GNOME/glib/-/jobs/3709402
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
See: #3148
The gdbus-example-objectmanager visibility header was being re-created
on reconfigure, causing a needless rebuild of gdbus tests that were
using the visibility header.
All other invocations of gen_visibility_macros are via custom_target.
The symbols still have to be exported from the library (since they’re
called from unit tests), but there was never any reason for them to be
in a public header.
This means they now disappear from `Gio-2.0.gir`.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3231
This property is supposed to be used by authors of applications that use GAppliaction to output the version by --version flag or otherwise if a version is needed.
Closes#3198
Signed-off-by: Maxim Moskalets <Maxim.Moskalets@kaspersky.com>
If we're writing the body to standard output, we cannot know what the
filename of the corresponding header is going to be, but it seems
vanishingly unlikely that it will be either `stdout.h` (which we would
traditionally have generated) or `-.h` (which we would have generated
since !3886).
This makes some of the output snippets sufficiently short that black(1)
requires that they are folded into a single line.
Signed-off-by: Simon McVittie <smcv@collabora.com>
In command-line tools, ordinary filenames normally do not have
special-cased meanings, so commit 3ef742eb "Don't skip dbus-codegen tests
on Win32" was a command-line API break: in the unlikely event that a
user wanted to write to a file named exactly `stdout`, this would have
been an incompatible change.
There is a conventional pseudo-filename to represent standard output,
which is `-` (for example `cat -` is a no-op filter). Adding support
for this is technically also a command-line API break (in the very
unlikely event that a user wants to write to a file named exactly `-`,
they would now have to write it as `./-`), but filenames starting with
a dash often require special treatment anyway, so this probably will not
come as a surprise to anyone.
When the output filename is `-` we don't want to use `#ifdef _____` as
a header guard, so special-case it as `__STDOUT__` as before.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This reverts commit fbdc9a2d03.
It was not submitted through a merge request and broke CI. Reverting it
immediately to unbreak CI and hence the rest of the development
pipeline. The changes can be re-submitted as a merge request so they’re
properly tested in CI before being merged.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3857#note_1994336
This fixes a race condition which frequently caused the
`memory-monitor-dbus.py` test to fail.
The registration of the `LowMemoryMonitor` object on the bus, and the
`GMemoryMonitorDBus`’s connection to the warning signal raced, such that
it was possible for the mock `LowMemoryMonitor` to emit a warning signal
before the `GMemoryMonitorDBus` proxy was listening, and hence the proxy
would never see the signal.
Fix this by explicitly synchronising the two before proceeding to the
tests.
Make the same changes in the `memory-monitor-portal.py` test too, even
though that one was not failing. This should remove the need for a 2s
wait on every test run.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #2887
Otherwise the test can go on to wait for a signal from the service
before it’s actually finished starting up.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #2887
Rather than sleeping and blocking everything, use a timeout source on
the main context so that inputs can continue to be handled while waiting
for a timeout.
This introduces no functional changes to the test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #2887
It should be doing already (or the tests would never work), but make it
clearer in the code that the same `GMainContext` is being iterated as is
being woken up in the rest of the test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #2887
I ran Bustle/dbus-monitor on the session bus while running the full GLib
test suite, and noticed that these tests were causing `Launched` signal
emissions on the main session bus. That suggested they weren’t isolated
properly, which at best causes noise on the bus and at worst could cause
spurious test failures.
Fix that by running those tests in a `GTestDBus` environment, as some of
the other appinfo tests already are.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
As seen in [CI](https://gitlab.gnome.org/GNOME/glib/-/jobs/3436216):
```
==13767== 144 (40 direct, 104 indirect) bytes in 1 blocks are definitely lost in loss record 528 of 562
==13767== at 0x4A18B2C: g_type_create_instance (gtype.c:1928)
==13767== by 0x49F92FF: g_object_new_internal (gobject.c:2235)
==13767== by 0x49FA247: g_object_new_valist (gobject.c:2574)
==13767== by 0x49F8D81: g_object_new (gobject.c:2047)
==13767== by 0x4AE2337: g_inet_socket_address_new (ginetsocketaddress.c:387)
==13767== by 0x4B1DB94: g_socket_address_new_from_native (gsocketaddress.c:230)
==13767== by 0x4B16CC2: g_socket_get_local_address (gsocket.c:2071)
==13767== by 0x40E102: test_receive_bytes_from (socket.c:2469)
==13767== by 0x4901E78: test_case_run (gtestutils.c:2974)
==13767== by 0x49022B2: g_test_run_suite_internal (gtestutils.c:3069)
==13767== by 0x490241A: g_test_run_suite_internal (gtestutils.c:3088)
==13767== by 0x4902690: g_test_run_suite (gtestutils.c:3168)
==13767== by 0x4900C8F: g_test_run (gtestutils.c:2275)
==13767== by 0x40EE8A: main (socket.c:2614)
```
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3220
There are several reasons why we might not be able to do the test setup
for --external-data: non-Linux platform, missing ld or objcopy,
objcopy doesn't support --add-symbol, or the CPU family is MIPS
(on which cc -r does not necessarily emit the specific MIPS ABI flavour
that we are targeting, for example different functionality levels or
different NaN encodings).
If we can't link in the test data, then obviously this test is not going
to pass. It was already skipped on non-Linux, but not on platforms that
hit one of the other reasons for the test setup to fail.
In particular, this test failed on Debian mips64el since commit 81059169,
which stopped linking the necessary resource on MIPS platforms, but
continued to assert that the resource is present at runtime.
Fixes: 81059169 "GIO/tests: skip test_resources_binary on MIPS platform"
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/3226
Signed-off-by: Simon McVittie <smcv@debian.org>
The same struct was reused across multiple tests, but without a shared
way of freeing its members. Refactor to add one.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
This is just the result of running `black $(git ls-files '*.py')`.
For some reason, the `sh-and-py-check` CI job didn’t run on merge
request !3751, so this non-standard formatting slipped through onto
`main`.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3754#note_1939914
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
It can cause failures for shared connection objects.
What can currently happen is this:
1. A user starts to asynchronously create a proxy object
2. A user starts to asynchronously create another proxy object
At this point, the asynchronous initialization for the two proxy objects
share the not yet initialized connection object.
3. While the shared connection objected is created, the user cancels the
creation with the supplied cancellable from the fist proxy object.
4. initable_init caches the canceled error and marks the connection as
initialized.
5. The initialization of the second proxy object fails with the same
canceled error.
To avoid this, clear the error in this case and destroy any member
variables that may have been created before the creation was canceled.
This way, the initialization of the second proxy object will restart the
connection initialization and with probably succeed.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
See the previous commit. These additions were kept in a separate commit
to make the changes to the existing tests in the previous commit
clearer.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3093
