Avoid re defining cases for GIoErrorEnum when we already handle them
through GFileError, so remove code duplication and just rely on
g_file_error_from_errno() to compute the file error and then use
g_io_error_from_file_error() to get the possible IOError.
In case it's something not handled as GFileError, we can use the same
logic as before.
This is now a safe change to do as we have covered all the supported
cases in tests.
Listing a user in `glib.doap` is important for ensuring their access
rights are correct in GitLab (as they are synced from the DOAP file by a
sysadmin script).
When `CODEOWNERS` was written, we were assuming that GNOME’s GitLab
would get support for the `CODEOWNERS` feature in GitLab. Unfortunately,
that’s not happened, and it remains an enterprise-only feature.
As such, that means that listing a co-maintainer of GLib in `CODEOWNERS`
is not sufficient to grant them permissions to actually merge MRs or
triage issues. That means they can’t really do any co-maintaining.
So fix that by updating the DOAP from `CODEOWNERS`. This doesn’t change
the list of co-maintainers at all, or the amount of trust assumed of
anybody.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This documents what we already do, rather than trying to make any
improvements to the process. They can happen separately, later, as
they’re a little more involved than just writing a Markdown document.
For example, we really should automate some of this.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
As with commit 0932f71460, which did this for refs/unrefs of the
object in `g_object_notify()`, we need to do a similar thing for
refs/unrefs of the instance with `g_signal_emit()`, for all the same
reasons.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Allow it to be run with a reduced iteration count when not run as `-m
perf`, in order to check that the test still works.
Previously it would do nothing when run without `-m perf`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Pass arguments to them so that they take minimal time. This will not
produce useful performance profiling results, but will smoketest that
the tests still run, don’t crash, and therefore probably aren’t
bitrotting too badly.
This is useful because a fair amount of work has gone into these
performance tests, and they’re useful every few years to analyse and
compare GObject performance. We don’t want them to bitrot between uses.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When running the test with `-s 0` it would previously crash. Fix that,
and make it so that it only does a single test run in that case.
This will be useful in an upcoming commit for smoketesting the test to
avoid bitrot.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
`g_test_message()` requires correctly encoded arguments, but some of the
strings in the `uri` test are (deliberately) not valid UTF-8. Encode
them before printing them.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This sequence was meant to be valid, but was incorrectly just the octal
form of the desired Unicode codepoint, not the UTF-8 encoding of that
codepoint.
This was causing `g_test_message()` to print an `[Invalid UTF-8]`
warning.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The output from the echo program ends up being outputted with the stdout
from the unit test in some tests. Ensure that the input to the echo
program is therefore a valid TAP comment, rather than garbage, so that
it’s safely ignored by a TAP parser looking at the output from the test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It seems this script has potentially never worked properly under Python
3. It’s supposed to list all the `_get_type()` functions it can find in
the GIO headers, but since the regex string passed to `re.search()` was
not a Python regex, nothing was matching.
Fix that, and do another few small cleanups to the script.
This makes the `defaultvalue` test not skip all the types.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When running under a strict TAP parser this was previously producing
problematic non-conforming output.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This is unlikely to be a bug in practice, as the certificate pointed to
by `root` should have a ref held on it as the issuer of another
certificate in the chain.
However, we can’t guarantee that’s how the `GTlsCertificate`
implementation behaves, so keep a temporary ref on `root` until it’s no
longer needed.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Coverity CID: #1489985
This is a partial revert of commit fa8c7c0da using the approach
suggested (and tested) by Kjell Ahlstedt.
It is intended to be temporary pending a proper dig into what’s causing
the regression, just so we can get the 2.73.1 release out.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2672
Padding numbers with a typical space character doesn't align them well
because it has a different size. Instead, we need to use the "U+2007"
figure (numeric) space that has the same size as a numerical digit.
This is only visible when using the `tnum` font feature that
makes numbers monospace.
Closes#2655
This means we can specify the standard options for testing GLib under
valgrind consistently, so that developers can use `meson test
--setup=valgrind` to run them.
Port the existing valgrind CI to use them (this will not change its
functional behaviour).
Suggested by Marco Trevisan at
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2717#note_1478891.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
As per review comment, this is miscellaneous enough that it could be
forgotten about at release time, but should still be mentioned.
Guarantee it by starting work on that now.
intl is complicated to look up. Some of that complexity now resides in
Meson, since 0.59.0, via a `dependency('intl')` lookup, so use that
instead.
The Meson lookup doesn't include all the checks here, but likewise this
meson.build doesn't include all the checks in Meson. Particularly, the
following are different:
- Meson accurately detects support built into libc, even if that
conflicts with an external library version (which should be detected as
broken and thus not-found, but glib does not do so).
The problem here is that depending on which libintl.h header is first
in the search path, the *gettext symbols may be the libc ABI, or they
may be renamed to libintl_*gettext, then additionally take over the
*gettext names via a macro, in order to invoke the external library
version even on systems where there is a libc builtin. This means that
checking for `cc.has_function()` correctly reports that there is such
a function in libc, but that unfortunately does not mean it is usable,
because source code referencing `ngettext` etc. will expect to be
linked to `libintl_ngettext`.
- glib checks whether the found intl requires pthread, rather than
simply trusting the result of `cc.find_library()` for the external
library case.
Do the heavy lifting by using Meson to check for intl, and select the
correct implementation, but do a post-discovery check if the symbol is
linkable both with/without pthread.
The logic is still a bit hairy, and eventually more of the logic could
be moved into Meson. But it's better than before.
Fixes incorrect detection of intl on musl-based systems (which have a
less capable libc intl), when GNU libintl is installed as an external
library.
iconv is complicated to look up. That complexity now resides in
Meson, since 0.60.0, via a `dependency('iconv')` lookup, so use that
instead.
No effort is made to support the old option for which type of iconv to
use. It was a false choice, because if only one was available, then
that's the only one you can use, and if both are available, the external
iconv shadows the builtin one and renders the builtin one unusable,
so there is still only one you can use.
This meant that when configuring glib with -Diconv=libc on systems that
had an external iconv, the configure check would detect a valid libc
iconv, try to use it, and then fail during the build because iconv.h
belongs to the external iconv and generates machine code using the
external iconv ABI, but fails to link to the iconv `find_library()`.
Meson handles this transparently.
Rather than carrying the copylib around inside GLib, which is a pain to
synchronise and affects our code coverage statistics.
This requires updating the CI images to cache the new subproject,
including updating the `cache-subprojects.sh` script to pull in git
submodules.
It also requires adding `gioenumtypes_dep` to be added to the
dependencies list of `libgio`, since it needs to be build before GVDB as
it’s pulled in by the GIO headers which GVDB includes.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2603
