GVDB deals with empty lists by returning NULL for the list instead of a
zero-length (non-NULL) strv. We can work around that in GSettingsSchema
by checking for the NULL case and treating it like a zero-length list.
https://bugzilla.gnome.org/show_bug.cgi?id=660147
If the connection to the bus is lost while a method call is ongoing,
the method call does not get cancelled. Instead it just sits around
until it times out.
This is visible here on XO laptops when stopping the display manager
during shutdown. imsettings starts sending a sync message to give up
its bus name (via g_bus_unown_name()), then systemd terminates the
session bus at approximately the same time. imsettings then hangs for
about 20 seconds before timing out the message.
http://lists.freedesktop.org/archives/dbus/2011-September/014717.html
imsettings behaviour could be improved as described in that thread,
but I think this is a glib bug. I've also come up with the attached
patch which fixes it.
Credits for the bug-fix goes to Daniel Drake <dsd@laptop.org>. The test
case was written by David Zeuthen <zeuthen@gmail.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=660637
Signed-off-by: David Zeuthen <davidz@redhat.com>
Since it is valid for a D-Bus interface / service to add new methods,
signals or properties we must NEVER warn about unknown properties or
drop unknown signals or disallow unknown method invocations when we
have an expected interface.
So this means that the expected_interface machinery is only useful for
checking that the service didn't break ABI.
Also update the docs so it is clear exactly what it means to have an
expected interface.
https://bugzilla.gnome.org/show_bug.cgi?id=660886
Signed-off-by: David Zeuthen <davidz@redhat.com>
g_file_make_directory_with_parents() will fail for already
existing directories, unlike g_mkdir_with_parents(), so mention
this clearly in the docs.
https://bugzilla.gnome.org/show_bug.cgi?id=660791
Previously, we took the default application for a particular mimetype
from the system and copied it into the user's configuration as the
default there.
Instead of doing that we leave the user's default unset, and at time of
use, if the user has no explicitly-set default value, we use the system
default.
This avoids complicated situations where inappropriate applications were
being set as the default in the user's configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=658188
We ignore entries with mountpoint of "swap" and "ignore". Add "none" to
that list, since Debian uses it.
Probably we should move to using our already-existing internal list of
things to ignore, but this patch is more minimally intrusive for now.
https://bugzilla.gnome.org/show_bug.cgi?id=654563
Commit afa82ae805f9c8bb875a3f863a7b4669953f159f introduced a compilation
regression on BSD systems that use the sysctl(3) interface; we need to
declare the buffer len in _g_get_unix_mount_points()
BZ #659528
Otherwise we might collide with an interface called Connection.
https://bugzilla.gnome.org/show_bug.cgi?id=659699
This is for the same reason that GDBusProxy has its properties
prefixed with g-.
Signed-off-by: David Zeuthen <davidz@redhat.com>
In registration_data_export_interface(), the object_path is obtained using:
object_path = g_dbus_object_get_object_path (G_DBUS_OBJECT (data->object));
But when exporting an object uniquely, the object_path is not assigned
to the GDBusObject until after all the interfaces are exported.
Therefore, registration_data_export_interface() is trying to export
the interface on the non-unique object path, which can lead to
run-time errors if an object already exists on that path.
Instead, registration_data_export_interface() should be passed the
object_path explicitly, as is done in
g_dbus_object_manager_server_export_unlocked().
Signed-off-by: David Zeuthen <davidz@redhat.com>
Ensure that the output/target stream in a g_output_stream_splice_async()
operation is marked as closed if G_OUTPUT_STREAM_SPLICE_CLOSE_TARGET is
passed to g_output_stream_splice_async(). This removes the possibility of
local FDs being closed twice because the stream's not marked as closed.
This is implemented by calling g_output_stream_close() from within
g_output_stream_splice_async() instead of calling the stream's close_fn()
directly.
Closes: bgo#659324
(cherry picked from commit fe27bf003764e453cd15cab67e8a99fcda84db1d)
When g_settings_apply() is called on a delayed settings backend and
there is a D-Bus error when communicating with dconf-service, recent
versions of the dconf GSettingsBackend call a function in GLib that
improperly delivered the signal directly instead of using
g_main_context_invoke().
This patch fixes this function to route in the same way as the others so
that the signal is dispatched in the proper GMainContext.
Otherwise, we could use-after-free the GDBusWorker, if its last-unref
is immediately after _g_dbus_worker_new returns (before the worker thread
does its initial read).
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=651268
Bug-NB: NB#271520
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
This member is written in _g_dbus_worker_stop from arbitrary threads, and
read by the worker thread, so it should be accessed atomically.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=651268
Bug-NB: NB#271520
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
We can't safely close the output part of the I/O stream until any
pending write or flush has been completed. In the worst case, this could
lead to an assertion failure in the worker (when the close wins the
race) or not closing the stream at all (when the write wins the race).
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=651268
Bug-NB: NB#271520
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
num_writes_pending was a counter, but it only took values 0 or 1, so make
it a boolean: it would never make sense to be trying to write out two
messages at the same time (they'd get interleaved).
Similarly, we can never be writing and flushing at the same time (that'd
mean we were flushing halfway through a message, which would be pointless)
so combine it with flush_pending too, calling the result output_pending.
Also assert that it takes the expected value whenever we change it,
and document the locking discipline used for it, including a subtle
case in write_message_in_idle_cb where it's not obvious at first glance
why we don't need the lock.
(Having the combined boolean at the top of the block of write-related
struct members improves struct packing on 64-bit platforms, by packing
read_num_ancillary_messages and output_pending into one word.)
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=651268
Bug-NB: NB#271520
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
The 'key' variable is no longer valid outside the cycle, owned and
probably already freed by GVariant. This causes apps to segfault
when proxy is constructed and a property on remote d-bus service
changes (actually is invalidated). Looks like a typo anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=659070
* Do not ignore the system default
* Do not exclude the last used being set from the default list
This fixes the default applications dialog in control-center.
https://bugzilla.gnome.org/show_bug.cgi?id=658188
- getmntinfo can take struct statfs or statvfs depending on the
OS. Use getvfsstat and if not found getfsstat instead. Idea from
Dan Winship.
- g_local_file_query_filesystem_info(): use statvfs.f_fstypename
if available
https://bugzilla.gnome.org/show_bug.cgi?id=617949
The threaded tests are using the default main context in the worker
thread, but were not g_main_context_acquire()ing it first, which meant
that g_tls_interaction_invoke_ask_password() in the main thread would
sometimes succeed in acquiring it itself and thus performing the
operation in the wrong thread. Fix that.
Also, we can't unref the loop from the worker thread, because the main
thread isn't holding a reference on it, and so it might end up being
destroyed while that thread is still inside g_main_loop_quit().
(which shouldn't ever have been part of the API. Grr.)
Solaris /etc/services doesn't even have "http", which was causing
tests/network-address to fail...
On Solaris, getsockname() on an unconnected socket gives an addrlen of
0 and doesn't set the sockaddr. So use the SO_DOMAIN sockopt to find
the socket family in that case. (SO_DOMAIN doesn't exist everywhere,
so we can't use it unconditionally. Also, we have to only use it if
getsockname() fails, since SO_DOMAIN returns a bogus value for
accept()ed sockets on both Linux and Solaris...)
Also, link libgio to -lresolv explicitly, rather than depending on
getting it implicitly via the libasyncns build (which should
eventually be going away).
https://bugzilla.gnome.org/show_bug.cgi?id=645336
* Add 'invoke' style method, which can be used to call an interaction
from any thread. The interaction will be run in the appropriate
#GMainContext
* Sync methods can be called whether main loop is running or not.
* Derived classes can choose to implement only sync or async
interaction method, and the invoke method will fill in the blanks.
* Documentation for the above.
* Tests for the above.
https://bugzilla.gnome.org/show_bug.cgi?id=657567
g_desktop_app_info_set_as_default_for_type() and
g_desktop_app_info_set_as_last_used_for_type () require the
application's ID, but depending on how the GAppInfo was created,
we might not be have one, and would thus silently fail to set
the default application, or last used application.
https://bugzilla.gnome.org/show_bug.cgi?id=657445
The test was using a socket in a temporary directory, but not actually
creating that temporary directory. This worked fine on Linux since it
actually ended up using an abstract socket instead, but failed on
unixes without abstract sockets.
https://bugzilla.gnome.org/show_bug.cgi?id=657517
