It search for attribute trash::orig-path and move the input file to it.
Possibly recreating the directory of orignal path and/or overwritting
the destination.
Closes#2098
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
They extend the behavior of, respectively, -p and -s options of the
glib test framework
Currently test suite are only run for one level under -p path, for
example, testfilemonitor -p /monitor would execute the following tests:
/monitor/atomic-replace
/monitor/file-changes
/monitor/dir-monitor
/monitor/dir-not-existent
/monitor/cross-dir-moves
With the --run-prefix the sub-test suite file will be executed:
/monitor/atomic-replace
/monitor/file-changes
/monitor/dir-monitor
/monitor/dir-not-existent
/monitor/cross-dir-moves
/monitor/file/hard-links
The --skip-prefix and run-prefix seems symmetrical, but there is a
difference with skip towards run:
--skip-prefix will use a prefix while --run-prefix only work for a valid test path.
For example and for the following test family:
/monitor/atomic-replace
/monitor/file-changes
/monitor/dir-monitor
/monitor/dir-not-existent
/monitor/cross-dir-moves
/monitor/file/hard-links
while --run-prefix /mon will not execute anything, --skip-prefix /mon
will skip all of these tests.
See #2238 which references this change.
- Add a test for parsing FILE scheme from uri
It had taken from GST test_protocol_case
- Add a split uri test with encoded spaces in its path
It had taken from GST test_uri_get_location
- Add tests for g_uri_is_valid
It had taken from GST test_uri_misc
Note that the 4 followings uri failed under gst_uri_is_valid but not
under g_uri_is_valid
B:\\foo.txt
B:/foo.txt
B://foo.txt
B:foo.txt
- Add tests for g_uri_split
It had taken from GST test_url_parsing
- Add tests for test_uri_normalize and test_uri_parsing_relative
The test URI had been taken from GST test_url_normalization
- Add tests for test_uri_iter_params
It had taken from GST test_url_unescape_equals_in_http_query
Closes#2150
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
It still works, and deprecating it would be quite disruptive (as it’s
used in headers), so amend the documentation to point people to
`G_NORETURN` instead.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #994
gobject/gobject.c: In function ‘g_object_new_internal’:
gobject/gobject.c:1962:25: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
1962 | for (j = 0; j < n_params; j++)
| ^
gobject/gobject.c:1989:21: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
1989 | for (i = 0; i < n_params; i++)
| ^
gobject/gobject.c: In function ‘g_object_new_with_custom_constructor’:
gobject/gobject.c:1836:21: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
1836 | for (j = 0; j < n_params; j++)
| ^
gobject/gobject.c:1914:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
1914 | for (i = 0; i < n_params; i++)
| ^
gobject/gobject.c: In function ‘g_object_class_install_properties’:
gobject/gobject.c:766:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
766 | for (i = 1; i < n_pspecs; i++)
| ^
gobject/gtype.c: In function ‘g_type_interface_add_prerequisite’:
gobject/gtype.c:1607:21: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘int’
1607 | for (i = 0; i < prerequisite_node->n_supers + 1; i++)
| ^
The problem occurs because we keep a pointer inside the allocated block,
instead of a pointer to the start of the block. This memory exists for
the lifetime of the application, so let's silence it.
This is probably abuse of VALGRIND_MALLOCLIKE_BLOCK(), which is really
intended for use in memory allocators, but gtype.c already uses it in
two other places, and it's a practical solution. I wrote another larger
fix for this issue that involves keeping an array of extra pointers when
running under valgrind. This is simpler.
Fix suggested by Philip Withnall
```
==180238== 16 bytes in 1 blocks are possibly lost in loss record 3,078 of 16,075
==180238== at 0x483BB1A: calloc (vg_replace_malloc.c:762)
==180238== by 0x5489495: g_malloc0 (gmem.c:132)
==180238== by 0x5489754: g_malloc0_n (gmem.c:364)
==180238== by 0x53FDBEE: type_set_qdata_W (gtype.c:3722)
==180238== by 0x53FDEE8: type_add_flags_W (gtype.c:3787)
==180238== by 0x53FC348: g_type_register_fundamental (gtype.c:2662)
==180238== by 0x53D969B: _g_enum_types_init (genums.c:124)
==180238== by 0x53FF058: gobject_init (gtype.c:4432)
==180238== by 0x53FF082: gobject_init_ctor (gtype.c:4493)
==180238== by 0x4010F29: call_init.part.0 (dl-init.c:72)
==180238== by 0x4011030: call_init (dl-init.c:30)
==180238== by 0x4011030: _dl_init (dl-init.c:119)
==180238== by 0x4002149: ??? (in /usr/lib64/ld-2.30.so)
```
Fixes#2076
The problem occurs because we keep a pointer inside the allocated block,
instead of a pointer to the start of the block:
```
==180238== 16 bytes in 1 blocks are possibly lost in loss record 3,086 of 16,075
==180238== at 0x483980B: malloc (vg_replace_malloc.c:309)
==180238== by 0x548942C: g_malloc (gmem.c:102)
==180238== by 0x54A4748: g_slice_alloc (gslice.c:1025)
==180238== by 0x53D0AAF: freelist_alloc (gatomicarray.c:77)
==180238== by 0x53D0B85: _g_atomic_array_copy (gatomicarray.c:133)
==180238== by 0x53F8E6D: iface_node_set_offset_L (gtype.c:1347)
==180238== by 0x53F91F1: type_node_add_iface_entry_W (gtype.c:1444)
==180238== by 0x53F93DF: type_add_interface_Wm (gtype.c:1477)
==180238== by 0x53FC946: g_type_add_interface_static (gtype.c:2852)
==180238== by 0x4A3D53A: gtk_menu_shell_accessible_get_type_once (gtkmenushellaccessible.c:26)
==180238== by 0x4A3D495: gtk_menu_shell_accessible_get_type (gtkmenushellaccessible.c:26)
==180238== by 0x4C8AC44: gtk_menu_shell_class_init (gtkmenushell.c:424)
```
Note we cannot use VALGRIND_FREELIKE_BLOCK() in freelist_free() because we
have not actually freed the FreeListNode and need to dereference it in
freelist_alloc() to decide whether to reuse the block. That would result
in a use-after-free warning before we would get a chance to call
VALGRIND_MALLOCLIKE_BLOCK() in the reuse path.
Also note that this free list only ever grows: it never shrinks for the
lifetime of the application, so nothing here will ever be truely freed,
although unused elements are eligible for reuse.
Fix suggested by Philip Withnall
Related: #2076
For URIs produced in string form, the path should be normalized and port
omitted when the default one is used. When querying the path and port of
a GUri (using getters or g_uri_split()) the normalized path and the
default port should be returned when they were omitted in the parsed URI.
Closes#2257
`g_time_zone_new_identifier()` returns NULL in the FreeBSD test setup,
presumably because `TZ` isn’t set.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #553
gobject/gtype.c: In function ‘type_node_add_iface_entry_W’:
gobject/gtype.c:1379:21: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘int’
1379 | for (i = 0; i < num_entries; i++)
| ^
gobject/gtype.c: In function ‘lookup_iface_entry_I’:
gobject/gtype.c:599:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
599 | if (index < IFACE_ENTRIES_N_ENTRIES (entries))
| ^
gobject/gatomicarray.h:51:8: note: in definition of macro ‘G_ATOMIC_ARRAY_DO_TRANSACTION’
51 | {_C_;} \
| ^~~
Use `g_time_zone_new_identifier()` instead so you can get error
checking.
Adapt the tests to match.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #553
It doesn’t seem to be possible to use `only:changes` from a branch
pipeline extending `.only-default` and have it correctly trigger when
`*.sh` or `*.py` files are modified.
We possibly need to convert all our pipelines to be merge-request-only,
but that’s an avenue I’ve been down before and I couldn’t get it to
work. Using
[`workflow:rules`](https://docs.gitlab.com/ee/ci/yaml/README.html#workflowrules)
might fix that, but I don’t have time to rework the entire CI to use
that now.
So in the meantime, move the SH and Py checks into the existing
style-check job so we’re not always spinning up two additional container
instances on every merge request.
See !1743.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Spotted by shellcheck (warning SC1117): `\e` is not an actual escape
sequence, so it’s interpreted as `\\e`. Best make that explicit.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
