This functionnallity can be disabled using property enable-proxy. It
enumerates addresses using GSocketConnectable::proxy_enumerate() instead of
enumerate(). When the returned address is of type GProxyAddress (a type
based on GInetSocketAddress), it gets the proxy protocol handler using
g_proxy_get_default_for_protocol() and call connect() on it.
Reviewed-by: Dan Winship <danw@gnome.org>
This patch implements method proxy_enumerate from GSocketConnectable for
all connectables (GNetworkAddress, GNetworkService, GInetSocketAddress
and GUnixSocketAddress).
Reviewed-by: Dan Winship <danw@gnome.org>
An implementation of GSocketAddressEnumerator that handles proxy
enumeration. This class is mainly usefull for Connectables implementation
such as NetworkService, NetworkAddress and SocketAddress to handle proxies.
Reviewed-by: Dan Winship <danw@gnome.org>
Implement an extension point for proxy protocol implementation. This
is mainly useful for socket-based proxy where it is possible to use the
proxied socket the same way it would for other stream based socket.
Reviewed-by: Dan Winship <danw@gnome.org>
This method allow creating a network address from a URI. If no port is
found in the URI, the default_port parameter will be used. Note that new
property scheme is there for future TLS implementation.
Reviewed-by: Dan Winship <danw@gnome.org>
A GSocketInetAddress representing the proxy server address with additional
properties proxy type, destination address and port, username and password.
Reviewed-by: Dan Winship <danw@gnome.org>
This extension point allow extending GLib with library like LibProxy that
interprets system proxy settings and finds the appropriate configuration
based on the type of connection being made.
Reviewed-by: Dan Winship <danw@gnome.org>
Add GZlibCompressor:file-info property. If it contains a non-NULL
GFileInfo, and the compressor is in GZIP mode, the filename and
modification time from the file info are written to the GZIP header
in the output data.
Add GZlibDeompressor:file-info property. If the decompressor is in GZIP
mode, and the GZIP data contains a GZIP header, the filename and
modification time are read from it, stored in a GFileInfo, and the
file-info property is notified.
Bug #617691.
Previously if a GSocketConnection had a blocking GSocket, it would
sometimes block during asynchonous I/O, and if it had a non-blocking
socket, it would sometimes return G_IO_ERROR_WOULD_BLOCK from
synchronous I/O. This fixes the connection to not depend on the socket
state.
https://bugzilla.gnome.org/show_bug.cgi?id=616458
Also use this in the test cases to check that serialization to and
from both big and little endian works.
Signed-off-by: David Zeuthen <davidz@redhat.com>
- Make GCredentials instance and class structures private so it can't
be subclassed and we don't have to worry about ABI compat
issues. This also allows us to get rid of the GCredentialsPrivate
struct.
- Add a GCredentialsType enumeration that is used whenever exchanging
pointers with the user. This allows us to support OSes with
multiple native credential types. In particular, it allows
supporting OSes where the native credential evolves or even changes
over time.
- Add g_socket_get_credentials() method.
- Add tests for g_socket_get_credentials(). Right now this is in the
GDBus peer-to-peer test case but we can change that later.
- Move GTcpConnection into a separate gtk-doc page as was already
half-done with GUnixConnection. Also finish the GUnixConnection
move and ensure send_credentials() and receive_credentials()
methods are in the docs. Also nuke comment about GTcpConnection
being empty compared to its superclass.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is currently unused but will probably be useful in the
future. For example, we could have a _ARG0_IS_PATH to specify that
arg0 should be used for arg0path.
This commit breaks API and ABI. Users of
g_dbus_connection_signal_subscribe() will need to port to this new
version.
Signed-off-by: David Zeuthen <davidz@redhat.com>
... so it is async, cancelable and returns an error. Also provide a
synchronous version.
This is an API/ABI break but it is expected that only very few
applications use this API.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add a <flags> tag to the schema file format and a flags='' attribute to
go along with. Add some extra test cases for those.
Add new g_settings_{get,set}_flags() calls and support binding to
GParamSpecFlags properties. Add test cases.
Without this guarantee, peer-to-peer connections are not very
useful. However, with this guarantee it's possible to export objects
in a handler for the GDBusServer::new-connection signal.
There are two caveats with this patch
- it won't work on message bus connections
- we don't queue up messages to be written
that can be addresses later if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=623142
Signed-off-by: David Zeuthen <davidz@redhat.com>
Like how we're handling activation, use GVariant for timestamps. To
avoid polluting the GtkApplication API with GVariants, we rename the
GApplication signals to "quit-with-data" and "action-with-data".
GtkApplication will then wrap those as just "quit" and "action".
https://bugzilla.gnome.org/show_bug.cgi?id=621002
Allow constructing a GDBusProxy for well-known names as discussed here
http://mail.gnome.org/archives/gtk-devel-list/2009-October/msg00075.html
including test cases.
Make it possible to create a GDBusProxy for a GBusType instead of a
GDBusConnection. This requires G_BUS_TYPE_NONE so add that too.
Nuke g_bus_watch_proxy() since one can now more or less use GDBusProxy
for this.
Port gdbus-example-watch-proxy to this new API and include this
example in the GDBusProxy doc page.
Also nuke the GType parameter from the GDBusProxy constructors as
requested here: https://bugzilla.gnome.org/show_bug.cgi?id=621229
Also update the porting guide and other API docs for this change.
Also fix a bug in the signal dispatching code so each subscriber only
get notified once, not N times, for the same signal. Also add a test
case for this.
https://bugzilla.gnome.org/show_bug.cgi?id=621213
Signed-off-by: David Zeuthen <davidz@redhat.com>
accept more than one callback.
g_bus_own_name_with_closures
g_bus_own_name_on_connection_with_closures
g_bus_watch_name_with_closures
g_bus_watch_name_on_connection_with_closures
g_bus_watch_proxy_with_closures
g_bus_watch_proxy_on_connection_with_closures
https://bugzilla.gnome.org/show_bug.cgi?id=621092
This adds a GApplication object to GIO, which is the core of
an application support class, supporting
- uniqueness
- exporting actions (simple scripting)
- standard actions (quit, activate)
The implementation for Linux uses D-Bus, takes a name on the
session bus, and exports a org.gtk.Application interface.
Implementations for Win32 and OS X are still missing.
add GSimplePermission, a trivial const implementation of GPermission
can-request and can-release are always false for this implementation and
the value of 'allowed' is decided at construction.
- Fix various #include issues
- Change #error to #warning for the EXTERNAL authentication mechanism.
It is not clear if this should work on Win32 at all.
- Call close() before unlink() for the SHA1 keyring
- Change #error to #warning so we don't forget to do
permission checking of the .dbus-keyrings directory
- Use Win32 SID for the SHA1 auth mech
- Apparently we can't use word 'interface' as an identifier
- Implement a _g_dbus_win32_get_user_sid() function. For now it's
private. Don't know if it should be public somewhere. Maybe in
a future GCredentials support for Win32? I don't know.
- GFileDescriptorBased is not available on Win32. So avoid using
it in GLocalFile stuff. Now, Win32 still uses GLocalFile + friends
(which works with file descriptors) so expose a private function
to get the fd for an OutputStream so things still work.
- Fixup gio.symbols
- Fixup tests/gdbus-peer.c so it builds
With this, at least things compile and the gdbus-peer.exe test case
passes. Which is a great start. I've tested this by cross-compiling on
a x86_64 Fedora 13 host using mingw32 and running the code on a 32-bit
Windows 7 box.
https://bugzilla.gnome.org/show_bug.cgi?id=619142
Signed-off-by: David Zeuthen <davidz@redhat.com>
This uncovered a bug in name watching if the name wasn't activatable.
Also provoked the need for on_connection variants of g_bus_watch_name
(added g_bus_watch_proxy's variant as well).
This makes it possible to use the cached properties mechanism even if
constructing the proxy with the DO_NOT_LOAD_PROPERTIES flag.
This is useful for cases where you obtain the and track object
properties out-of-band. For example, in udisks, the plan is to have
something like this
Manager.GetObjects (out ao paths, out aa{sa{sv}} all_properties);
Manager.ObjectAdded (o path, a{sa{sv}} all_properties);
Manager.ObjectChanged (o path, a{sa{sv}} all_properties);
Manager.ObjectRemoved (o path, a{sa{sv}} all_properties);
E.g. the first GetObjects() call will return *all* data about *all*
exported objects. Further, this way a client will only need to listen
these three signals (three AddMatch) on the Manager object and it will
never need to do GetAll() etc (e.g. can use DO_NOT_LOAD_PROPERTIES).
(Of course this only works if the client is interested in all
objects... while this is true for udisks it is generally not true for
other D-Bus services).
Also use expected_interface to check for programming errors.
Lots of people been suggesting this. We still use MethodInvocation /
method_invocation for handling incoming method calls so use call()
instead of invoke_method() helps to separate the client and server
facilities. Which is a good thing(tm).
There are apparently two incompatible ways of naming abstract sockets:
pad the sockaddr with 0s and use the entire thing as the name, or else
don't, and just pass a shorter length value to the relevant functions.
We previously only supported the former method. Add support for the
latter.
Also correctly handle "anonymous" unix sockaddrs (eg, the client side
of a connection, or a socketpair() socket), and add unix domain socket
support to the socket-client and socket-server test programs to make
sure this all works.
https://bugzilla.gnome.org/show_bug.cgi?id=615960
Correspond to GUnixInputStream and GUnixOutputStream. No true async
support though. But that is how the Win32 API is, for files not
explicitly opened for so-called overlapped IO.
The API to create these streams takes Win32 HANDLEs. Not file
descriptors, because file descriptors are specific to the C library
used. The user code and GLib might be using different C libraries.
Also add a test program for the new classes, and a gio-windows-2.0.pc
file.
It turns out that the way this worked did not work out for the current
main usecase (gedit) due to issues with how this is best integrated
with GtkTextView. So, in order to not have to support an unused non-ideal
API forever we remove this before its been in a stable release.
The basic feature seems to have some utility though, so we hope for it
to eventually return in a better form.
Adds an optional query method to giomodules which should return all
possible extension points the module may implement.
Then we add a new call g_io_modules_scan_all_in_directory() similar to
g_io_modules_load_all_in_directory() that doesn't return all loaded
modules, thus allowing lazy loading.
In g_io_modules_scan_all_in_directory we look for an optional
giomodule.cache file and use the information in that to avoid
loading modules until they are needed for an extension point.
This patch only adds the function. The function is a NOP.
See the API documentation for a rationale.
Part of: Bug 591388 - number of GCancellables available is too limited
For details, see bug 587482. The new api:
- Provide new _with_operation() variants of all unmount and eject methods
- Add GMountOperation::show-processes signal
- this can be used to show processes blocking an unmount operation
- Deprecate all unmount and eject methods
- Add g_drive_can_start_degraded() method
- this is to avoid auto-starting degraded drives
- Make g_drive_stop() resp. g_file_stop_mountable() take a GMountOperation
- these ops were recently added and not yet public API so it's fine
to change how they work
- Provide a way to poll mountable files, e.g. g_file_poll_mountable()
- Add some missing file attributes for mountable files
- G_FILE_ATTRIBUTE_MOUNTABLE_UNIX_DEVICE_FILE
- needed for the GDU Nautilus extensions to format a volume
- G_FILE_ATTRIBUTE_MOUNTABLE_CAN_START_DEGRADED:
- mimics g_drive_can_start_degraded()
- G_FILE_ATTRIBUTE_MOUNTABLE_CAN_POLL:
- mimics g_drive_can_poll_for_media()
- G_FILE_ATTRIBUTE_MOUNTABLE_IS_MEDIA_CHECK_AUTOMATIC
- mimics g_drive_is_media_check_automatic()
GFile allows for the possibility that external implementations may not
support thread-default contexts yet, via
g_file_supports_thread_contexts(). GVolumeMonitor is not yet
thread-default-context aware.
Add a test program to verify that basic gio async ops work correctly
in non-default contexts.
http://bugzilla.gnome.org/show_bug.cgi?id=579984
Add API for starting/stopping drives. This new API will enable
GVolumeMonitor and GVfs implementations to add support for the
following features
1. Powering down external hard disk enclosures / drives
2. Starting/stopping multi-disk devices (such as RAID/btrfs/ZFS)
3. Connecting/disconnecting iSCSI devices
4. Reacting to the user pressing e.g. the "remove drive" button on
a IBM/Lenovo Ultrabay: http://www.thinkwiki.org/wiki/Ultrabay
See the bug for the corresponding GVfs and Nautilus changes.
The whole protocol name thing is pretty weird. The getprotobyname functions
seem to only specify one mapping for name <-> ids, so all families/types
must use the same values. Plus the values used for the protocols are
standardized by IANA, so are always the same.
So, we drop using names for protocols, intead introducing an enum with
a few commonly availible and used protocols.
We want to use the protocol id for lookup in the GSocketConnection
code, so we expose it. We also make GSocket store the protocol
as an int for less memory use and to allow platform specific protocols
to be specified.
Also added g_socket_protocol_id_lookup_by_name() to allow the higher
level code to specify the name by string, and g_socket_get_protocol_name()
to get it.
This adds:
GInitable - failable object constructor interface
GAsyncInitable - async failable object constructor interface
GSocket - Platform independent lowlevel berkely socket style object
GSocketControlMessage - For passing control messages over GSocket
GUnixFDMessage - unix fd passing socket control message
Some changes were done during the import from gnio to make things
work in glib. For instance, types were moved to other headers, header
file boiler plate were updated to glib style and gio.symbols stuff
was added.
Higher-level wrappers around GResolver. GSocketConnectable provides an
interface for synchronously or asynchronously iterating multiple
socket addresses, with GNetworkAddress and GNetworkService providing
interfaces based on hostname and SRV record resolution.
Part of #548466.
GResolver provides asynchronous (and synchronous-but-cancellable) APIs
for resolving hostnames, reverse-resolving IP addresses back to
hostnames, and resolving SRV records. Part of #548466.
Types and methods for dealing with IPv4 and IPv6 addresses (and UNIX
domain socket addresses under UNIX). This does not include code for
actual socket I/O.
Originally from "gnio". Much of the code was written by Christian
Kellner, Samuel Cormier-Iijima, and Ryan Lortie.
Part of #548466.
There are race conditions when connecting and disconnecting from the
"cancelled" signal on GCancellable which you need to do when
implementing cancellable operations. This adds helper functions that
avoid these races and mentions these races in the docs. (#572844)
2009-01-28 Ryan Lortie <desrt@desrt.ca>
Bug 568575 – _async functions for GDataInputStream
* gdatainputstream.h:
* gdatainputstream.c: add _async versions of read_line and read_until.
* gio.symbols:
* ../docs/reference/gio/gio-sections.txt: add new functions
* tests/sleepy-stream.c: new test case for async read line
* tests/Makefile.am: add new test
svn path=/trunk/; revision=7835
2009-01-20 Ryan Lortie <desrt@desrt.ca>
Bug 568394 – dropping the last reference to a stream filter closes the
base stream
* gfilterinputstream.h:
* gfilterinputstream.c: add "close-base-stream" property and only
close the base stream if it is true. issue async close callbacks from
correct source object.
* gfilteroutputstream.h:
* gfilteroutputstream.c: add a "close-base-stream" property and only
close the base stream if it is true. issue async close callbacks from
correct source object.
* gbufferedoutputstream: check g_filter_output_stream_get_close_base()
before closing the base stream. fix invalid source tag comparison in
close_async (was comparing to flush_async).
* ../docs/reference/gio/gio-sections.txt:
* gio.symbols: add
g_filter_{in,out}put_stream_{g,s}et_close_base_stream
* tests/filter-streams.c: new test cases
* tests/Makefile.am: add new test
* tests/.gitignore: add new test
svn path=/trunk/; revision=7825
* gio.symbols:
* gunixinputstream.[hc]:
* gunixoutputstream.[hc]: Add "fd" and "close-fd" properties
including getters and setters. Patch by Maciej Piechotka
svn path=/trunk/; revision=7735
2008-12-01 Alexander Larsson <alexl@redhat.com>
* gio.symbols:
* gmount.[ch]:
* gunionvolumemonitor.c:
* gvolume.c:
Add and document g_mount_is_shadowed plus calls
to set/unset a mount as shadowed
svn path=/trunk/; revision=7716
* gio.symbols:
* gappinfo.[hc]: Add g_app_info_get_commandline. Requested
by Hans Petter Jansson.
* gdesktopappinfo.c: And implement it here.
svn path=/trunk/; revision=7706
Bug 509446 - portable blocking gio cancellation
* gcancellable.c (g_cancellable_make_pollfd): New method to make a
GPollFD for a cancellable (which is slightly more complicated on
Windows than Unix).
* gunixinputstream.c (g_unix_input_stream_read):
* gunixoutputstream.c (g_unix_output_stream_write): Use
g_cancellable_make_pollfd() and g_poll() rather than using poll()
directly.
* tests/unix-streams.c: test of GUnixInputStream,
GUnixOutputStream, and GCancellable.
svn path=/trunk/; revision=7553
2008-07-28 Matthias Clasen <mclasen@redhat.com>
* gemblemedicon.[hc]: Add a GIcon implementation that can
add an emblem to another icon.
* gio.h:
* Makefile.am:
* gio.symbols: Glue
* gloadableicon.c:
* gfileicon.c: Small documenatation additions.
svn path=/trunk/; revision=7263
2008-07-06 David Zeuthen <davidz@redhat.com>
* gio.symbols:
* gvolume.[ch]: Add new method g_volume_get_activation_root(). This
is needed for easily handling adoption of foreign volumes by
out-of-process volume monitors (#541793)
svn path=/trunk/; revision=7169
* gio.symbols:
* gdesktopappinfo.[hc]: Add a function to create a
GDesktopAppInfo from a GKeyFile. Proposed by Josselin Mouette.
svn path=/trunk/; revision=7143
2008-06-16 Ross Burton <ross@burtonini.com>
Bug 536252 – GFileEnumerator should allow access to the containing
GFile
* gio/gfileenumerator.c:
* gio/gfileenumerator.h:
* gio/gfile.h:
Add g_file_enumerator_get_container() and a container writeable
construct-only property. Also shuffle around typedefs to make it
compile.
* gio/glocalfileenumerator.c:
* gio/glocalfileenumerator.h:
* gio/glocalfile.c:
Instead of a string filename take a GFile in the constructor and
use it to set the container property.
* gio/gio.symbols:
* docs/reference/gio/gio-sections.txt:
Update with new API.
svn path=/trunk/; revision=7044
2008-05-17 Matthias Clasen <mclasen@redhat.com>
* gcontenttype.h:
* gcontenttype.c: (g_content_type_from_mime_type):
New function to create a content type from a mime type. (#527175,
Milan Crha)
svn path=/trunk/; revision=6906
2008-05-05 Michael Natterer <mitch@imendio.com>
* Makefile.am. build with G_DISABLE_SINGLE_INCLUDES to prevent
code from being checked in that breaks the build of applications
which use G_DISABLE_SINGLE_INCLUDES.
* makegioalias.pl: make the alias file include "glib.h" instead of
"glibconfig.h".
* gio.symbols: whitespace change to force regeneration of the
alias file after above script change.
* gfileinfo.h: remove inlcusion of <glib/gfileutils.h>.
* gfilenamecompleter.c: remove inclusion of "gurifuncs.h".
* gioerror.h: #include <glib.h> instead of <glib/gerror.h>.
* glocalfileinfo.c: remove inclusion of <glib/gchecksum>.
svn path=/trunk/; revision=6879
2008-03-30 Matthias Clasen <mclasen@redhat.com>
* gio.symbols:
* gfile.c:
* gfile.h: Add g_file_query_file_type convenience function
to query the type of a file. (#520715, Mikkel Kamstrup Erlandsen)
svn path=/trunk/; revision=6784
2008-02-21 David Zeuthen <davidz@redhat.com>
* glocalfileinfo.c: (_g_local_file_info_get):
* gcontenttype.c:
(g_content_type_get_icon): Implement this function by
moving bits from glocalfileinfo.c
(g_content_type_get_description): Unalias before getting
description (#517687)
* gfile.c: (g_file_class_init),
(g_file_query_filesystem_info_async),
(g_file_query_filesystem_info_finish),
(query_filesystem_info_data_free),
(query_filesystem_info_async_thread),
(g_file_real_query_filesystem_info_async),
(g_file_real_query_filesystem_info_finish):
* gfile.h: Implement async version of
g_file_query_filesystem_info()
* gfileinfo.h: Add new attributes for filesystem::use-preview
* gio.symbols: Update
* gthemedicon.c: (g_themed_icon_append_name):
* gthemedicon.h: Add new new convenience function.
* gunionvolumemonitor.c: (g_union_volume_monitor_dispose),
(get_mounts), (get_volumes), (get_connected_drives),
(get_volume_for_uuid), (get_mount_for_uuid),
(g_union_volume_monitor_init), (populate_union_monitor),
(g_volume_monitor_get), (_g_mount_get_for_mount_path),
(g_volume_monitor_adopt_orphan_mount):
* gvolumemonitor.c:
* gvolumemonitor.h: Use recursive locks so it's safe for volume
monitor implementations to call into the main volume monitor. Also
separate object initialization and volume monitor initialization
such that non-native volume monitors can properly adopt their
mounts away.
svn path=/trunk/; revision=6550
2008-02-21 Alexander Larsson <alexl@redhat.com>
* gfile.[ch]:
* gio.symbols:
Add new g_file_has_prefix that does the same as g_file_contains_file.
Deprecate g_file_contains_file and add a macro that converts
it to g_file_has_prefix.
The reason for this change is that the contains_file() name seems to
imply that this does more work than what it does, but its really only
a name match (from #517086)
* gdummyfile.c:
* glocalfile.c:
* tests/g-file.c:
Update to match the above change.
svn path=/trunk/; revision=6546
2008-01-24 Alexander Larsson <alexl@redhat.com>
* gfile.[ch]:
* gfile.h:
* gio.symbols:
Add g_file_copy_async() (#511580)
Based on patch from Carlos Garcia Campos
svn path=/trunk/; revision=6363
2008-01-09 Alexander Larsson <alexl@redhat.com>
* gio.symbols:
* gunixmount.c:
* gunixmounts.[ch]:
Add g_unix_mount_guess_should_display and use
for unix volume monitor backend.
This means we more or less show what the
gnome-vfs backend did.
Based on patch from Padraig O'Briain
svn path=/trunk/; revision=6285
2008-01-07 Alexander Larsson <alexl@redhat.com>
* gmemoryinputstream.c:
Translate error strings
* gio.symbols:
* gmemoryoutputstream.[ch]:
New implementation that avoids using GByteArray
in implementation and API. (#506377)
svn path=/trunk/; revision=6260
2008-01-04 Alexander Larsson <alexl@redhat.com>
* gappinfo.[ch]:
* gwin32appinfo.c:
* gio.symbols:
Add g_app_info_supports_files()
Remove desktop arg from g_app_info_should_show().
* gdesktopappinfo.[ch]:
Implement g_app_info_supports_files() and new should_show()
Add g_desktop_app_info_set_desktop_env() to set the desktop
for should_show(). (This will be set by gtk+ later)
svn path=/trunk/; revision=6242
2008-01-04 Alexander Larsson <alexl@redhat.com>
* gio.symbols:
* gmemoryinputstream.[ch]:
Improve API so that you can use multile chunks
of memory and custom destroy functions. (#506374)
svn path=/trunk/; revision=6241
2007-12-14 David Zeuthen <davidz@redhat.com>
* Makefile.am:
* gio.symbols:
* gmount.c: (g_mount_get_uuid), (g_mount_can_eject),
(g_mount_eject), (g_mount_eject_finish):
* gmount.h:
* gunionvolumemonitor.c: (g_union_volume_monitor_finalize),
(get_volume_for_uuid), (get_mount_for_uuid),
(g_union_volume_monitor_class_init),
(get_default_native_type_with_exclude), (get_default_native_type),
(get_native_type), (update_native_type),
(g_union_volume_monitor_init), (_g_mount_get_for_mount_path):
* gunixmount.c: (_g_unix_mount_new), (g_unix_mount_get_uuid),
(g_unix_mount_can_eject), (eject_unmount_cb),
(eject_unmount_read_error), (eject_unmount_do),
(g_unix_mount_unmount), (g_unix_mount_eject),
(g_unix_mount_eject_finish), (g_unix_mount_mount_iface_init):
* gunixmounts.c: (g_unix_mount_guess_can_eject),
(g_unix_mount_point_guess_can_eject):
* gunixmounts.h:
* gunixvolume.c: (_g_unix_volume_new), (g_unix_volume_get_uuid),
(g_unix_volume_can_eject), (g_unix_volume_get_drive),
(eject_mount_cb), (eject_mount_read_error), (eject_mount_do),
(g_unix_volume_mount), (g_unix_volume_eject),
(g_unix_volume_eject_finish), (g_unix_volume_volume_iface_init):
* gunixvolumemonitor.c: (get_volume_for_uuid),
(get_mount_for_uuid), (g_unix_volume_monitor_class_init),
(update_mounts):
* gvolume.c: (g_volume_get_uuid), (g_volume_can_eject),
(g_volume_eject), (g_volume_eject_finish):
* gvolume.h:
* gvolumemonitor.c: (g_volume_monitor_get_volume_for_uuid),
(g_volume_monitor_get_mount_for_uuid):
* gvolumemonitor.h:
Provide eject() on both GMount and GVolume and utility functions
to guess whether a GUnixMountPoint or GUnixMountEntry should be
ejected. Introduce the concept of UUID's and wire it into GVolume
and GMount and provide API on GVolumeMonitor to find such
instances. Also handle the case where an external
GNativeVolumeMonitor fails to initialize. Lock around the
_g_get_mount_for_mount_path() function such that volume monitor
implementations won't have to do locking themselves.
svn path=/trunk/; revision=6140
2007-12-14 Alexander Larsson <alexl@redhat.com>
* Makefile.am:
* gfileattribute.[ch]:
* gfileattribute-priv.h:
Move GFileAttributeValue to a private header, as
its sort of ugly.
* gfile.[ch]:
Make set_attribute take a type + a pointer instead
of a GFileAttributeValue.
* gfileinfo.[ch]:
Fix up for above changes.
Add g_file_info_get_attribute_data to get
all info in one call, g_file_info_get_attribute_status
to get the status and g_file_info_get_attribute_as_string.
* gio.symbols:
* glocalfile.c:
* glocalfileinfo.[ch]:
Update for changes
* gunixmounts.c:
Make _guess_type static.
svn path=/trunk/; revision=6129
2007-12-14 Alexander Larsson <alexl@redhat.com>
* gappinfo.h:
* gfile.[ch]:
* gfileattribute.[ch]:
* gio.symbols:
* glocalfile.c:
* glocalfileoutputstream.c:
* gmountoperation.[ch]:
* goutputstream.[ch]:
Clean up all flags enums to not have _FLAGS in them
Make the names of some of the enums better.
* glocalfileinfo.c:
Fix warning
svn path=/trunk/; revision=6119
2007-12-11 David Zeuthen <davidz@redhat.com>
Rework how volumes, drives and volume monitoring is
done. Previosly the model was
GDrive <1-1> GVolume
where a GDrive instance represented a mount point and a GVolume
instance represented a mounted file system. This patch changes it
the model to
GDrive <1-N> GVolume <1-1> GMount
where GMount now serves the purpose of the old GVolume and the new
GVolume serves the purpose of the old GDrive. In addition the new
GDrive interface is used to represent a collection of GVolume
instances (typically partitions) and also contains utility to query
the state of the physical drive the GDrive object represents (such
as checking for media, polling the drive, ejecting the media etc.).
Also implement mounting and unmounting in the Unix volume monitor
backend. A subquent patch will introduce GDrive support for ejection
of media.
* Makefile.am:
* gdrive.c: (g_drive_is_media_check_automatic),
(g_drive_is_media_removable), (g_drive_has_media),
(g_drive_can_poll_for_media), (g_drive_eject),
(g_drive_eject_finish), (g_drive_poll_for_media),
(g_drive_poll_for_media_finish):
* gdrive.h:
* gfile.c: (g_file_find_enclosing_mount):
* gfile.h:
* gio.symbols:
* glocaldirectorymonitor.c:
(g_local_directory_monitor_constructor), (mounts_changed):
* glocalfile.c: (get_mount_info),
(g_local_file_find_enclosing_mount),
(g_local_file_file_iface_init):
* gnativevolumemonitor.h:
* gunionvolumemonitor.c: (get_mounts), (get_volumes),
(get_connected_drives), (g_union_volume_monitor_class_init),
(child_volume_added), (child_volume_removed),
(child_volume_changed), (child_mount_added), (child_mount_removed),
(child_mount_pre_unmount), (child_mount_changed),
(child_drive_changed), (g_union_volume_monitor_add_monitor),
(g_union_volume_monitor_remove_monitor),
(_g_mount_get_for_mount_path):
* gunixmounts.c: (g_unix_is_mount_path_system_internal),
(guess_system_internal), (_g_get_unix_mounts),
(_g_get_unix_mount_points), (g_get_unix_mount_at),
(g_unix_mount_free), (g_unix_mount_compare),
(g_unix_mount_get_mount_path), (g_unix_mount_get_device_path),
(g_unix_mount_get_fs_type), (g_unix_mount_is_readonly),
(g_unix_mount_is_system_internal), (g_unix_mount_guess_type),
(type_to_icon), (g_unix_mount_guess_name),
(g_unix_mount_guess_icon), (g_unix_mount_point_guess_name),
(g_unix_mount_point_guess_icon), (_canonicalize_filename),
(_resolve_symlink), (_resolve_dev_root):
* gunixmounts.h:
* gunixvolume.c: (g_unix_volume_finalize), (_g_unix_volume_new),
(_g_unix_volume_disconnected), (_g_unix_volume_set_mount),
(_g_unix_volume_unset_mount), (g_unix_volume_get_icon),
(g_unix_volume_get_name), (g_unix_volume_can_mount),
(g_unix_volume_get_drive), (g_unix_volume_get_mount),
(_g_unix_volume_has_mount_path), (mount_cb), (mount_read_error),
(g_unix_volume_mount), (g_unix_volume_mount_finish),
(g_unix_volume_volume_iface_init):
* gunixvolume.h:
* gunixvolumemonitor.c: (g_unix_volume_monitor_finalize),
(get_mounts), (get_volumes), (get_connected_drives),
(get_mount_for_mount_path), (g_unix_volume_monitor_class_init),
(mountpoints_changed), (mounts_changed),
(g_unix_volume_monitor_init),
(_g_unix_volume_monitor_lookup_volume_for_mount_path),
(find_mount_by_mountpath), (update_volumes), (update_mounts):
* gunixvolumemonitor.h:
* gvolume.c: (g_volume_get_mount), (g_volume_can_mount),
(g_volume_mount), (g_volume_mount_finish):
* gvolume.h:
* gvolumemonitor.c: (g_volume_monitor_class_init),
(g_volume_monitor_get_connected_drives),
(g_volume_monitor_get_volumes), (g_volume_monitor_get_mounts):
* gvolumemonitor.h:
svn path=/trunk/; revision=6095
2007-12-05 Alexander Larsson <alexl@redhat.com>
* gdatainputstream.c:
Fix warnings
* gio.symbols:
* giomodule.[ch]
* glocaldirectorymonitor.c:
* glocalfilemonitor.c:
* gunionvolumemonitor.c:
* gvfs.c:
Make g_io_modules_ensure_loaded a private function and
don't pass in the dirname. This means we can do magic
directory finding in the win32 version.
Export the actual load-modules-in-directory code so that
gvfs can reuse that.
svn path=/trunk/; revision=6050
2007-12-03 Hans Breuer <hans@breuer.org>
[start of port to win32/msvc]
* gcancellable.c : HAVE_UNIST_H and _pipe()
* gcontenttype.c : only include <dirent.h> in the UNIX branch
* gdatainputstream.c : pointer arithmetic on void* is a gcc extension
* gdummyfile.c glocalfileinputstream.c gsimpleasyncresult.c : use
HAVE_UNIST_H
* glocalfileoutputstream.c : use HAVE_UNIST_H and s/ssize_t/gssize/
* glocalvfs.c : use HAVE_PWD_H
* gio.symbols : ifdef unix specific functions with G_OS_UNIX
* makefile.msc : new file (maybe later converted to makefile.msc.in)
* Makefile.am : added to EXTRA_DIST
svn path=/trunk/; revision=6027
