We've various macros definitions that are depending using C++ features
that may not work in all the standard versions, so recompile the cxx
tests that we have in all the ones we want to support.
GCC isn't smart enough to recognise that the assertion on the size of
N_PROPERTIES also affects the assertion on the GParamSpec array access,
so we need to coalesce the two checks into one to avoid an array-bounds
compiler warning.
All of these warnings indicate programmer error, so critical is most
appropriate here.
Exceptions: deprecation warnings are just warnings. Also, warnings that
are worded with uncertainty can remain warnings rather than criticals.
The prefix for GMarkupParseFlags enumeration members is G_MARKUP; this
means that G_MARKUP_PARSE_FLAGS_NONE gets split into
GLib.MarkupParseFlags.PARSE_FLAGS_NONE by the introspection scanner.
The `/*< nick=none >*/` trigraph attribute is a glib-mkenum thing, and
does not affect the introspection scanner; it would also only affect the
GEnumValue nickname, which is not used by language bindings to resolve
the name of the enumeration member. Plus, GMarkupParseFlags does not
have a corresponding GType anyway.
ginsttest-runner defaults to timing out each test after 5 minutes,
but gobject/tests/performance/performance.c defaults to running each
of 18 tests for 15 seconds. The result is close enough to 5 minutes
that the setup overhead is enough to make it time out.
We're only running these tests to prove that they still work, not to
get meaningful performance numbers, so cut them down to 1 second per
test-case (the result of which is that performance.c takes about a
minute).
Signed-off-by: Simon McVittie <smcv@collabora.com>
We don't need a cpp toolchain for building glib so lets just
automatically disable tests requiring one when not available.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
We're calling g_object_notify so let's not make gobject to call it for
us.
This also allows to test that changing a property again doesn't lead to
dispatch properties being called.
This tests that we call a custom dispatch_properties_changed,
even in the absence of connected notify handlers. (A recent
optimization broke that and caused a regression in GTK).
Add tests in which `g_object_run_dispose()` is called on the source or target
of a `GBinding`. After commit a4fa456e67,
the target test caused a failed assertion in `g_weak_ref_set()` that was not
found by the existing tests. Commit 94ba14d542
weakens the assertion to allow the test to succeed.
See https://gitlab.gnome.org/GNOME/glib/-/issues/2676
This makes calls to g_signal_connect_data() and g_signal_connect_object()
with default flags more self-documenting.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Pass arguments to them so that they take minimal time. This will not
produce useful performance profiling results, but will smoketest that
the tests still run, don’t crash, and therefore probably aren’t
bitrotting too badly.
This is useful because a fair amount of work has gone into these
performance tests, and they’re useful every few years to analyse and
compare GObject performance. We don’t want them to bitrot between uses.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When running the test with `-s 0` it would previously crash. Fix that,
and make it so that it only does a single test run in that case.
This will be useful in an upcoming commit for smoketesting the test to
avoid bitrot.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Beef up the singleton testcase to reproduce a
freeze count underflow when setting properties
at construction time, with a custom constructor.
Helps: #2666
These are deprecated, but it’s easy enough to test them anyway. This
bumps up code coverage a bit and hopefully ensures we don’t accidentally
regress on them in future.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
At the moment these tests basically just ensure that the program’s
compiled properly and doesn’t crash on startup. They don’t check
functionality very deeply.
But they’re a start.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This doesn’t change the tests’ behaviour, but moves them to a slightly
more logical location.
They are still not installed or run by default.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1434
Install the properties with a mixture of
g_object_class_install_properties and
g_object_class_install_properties, and verify
that finding them still works, regardless of
whether we use string literals or not.
These have all been added manually, as I’ve finished all the files which
I can automatically detect.
All the license headers in this commit are for LGPL-2.1-or-later, and
all have been double-checked against the license paragraph in the file
header.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
Add SPDX license (but not copyright) headers to all files which follow a
certain pattern in their existing non-machine-readable header comment.
This commit was entirely generated using the command:
```
git ls-files gobject/tests/*.[ch] | xargs perl -0777 -pi -e 's/\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/\n \*\n \* SPDX-License-Identifier: LGPL-2.1-or-later\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/igs'
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
None of these messages are particularly helpful, but they increase the
overall test log output size, which has to be stored by the CI for every
test run.
With these messages removed, the size of a full test log is reduced from
6.5MB to 1.8MB for me.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Modified by Philip Withnall to omit the subdirectory and drop the
`refcount` suite as both seem like unnecessary over-categorisation.
Related to issue #1434
Much like GBindingGroup, the GSignalGroup object allows you to connect many
signal connections for an object and connect/disconnect/block/unblock them
as a group.
This is useful when using many connections on an object to ensure that they
are properly removed when changing state or disposing a third-party
object.
This has been used for years in various GNOME projects and makes sense to
have upstream instead of multiple copies.
Originally, GBindingGroup started with Builder as a way to simplify all
of the third-degree object bindings necessary around Model-Controller
objects such as TextBuffer/TextView.
Over time, it has grown to be useful in a number of scenarios outside
of Builder and has been copied into a number of projects such as GNOME
Text Editor, GtkSourceView, libdazzle, and more.
It makes sense at this point to unify on a single implementation and
include that upstream in GObject directly alongside GBinding.
This should remove some warnings from the CI, making it easier to see
legitimate CI failures.
For example, see https://gitlab.gnome.org/GNOME/glib/-/jobs/1621041.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When an object with toggle reference is notifying a change we just
assume that this is true because of previous checks.
However, while locking, another thread may have removed the toggle
reference causing the waiting thread to abort (as no handler is set at
that point).
To avoid this, once we've got the toggle references mutex lock, check
again if the object has toggle reference, and if it's not the case
anymore just ignore the request.
Add a test that triggers this, it's not 100% happening because this is
of course timing related, but this is very close to the truth.
Fixes: #2394
As per the previous change, an object that had weak locations set may
need to lock again the weak locations mutex during qdata cleanup, but
we can avoid this when we know we're removing the last location, by
removing the qdata entry and freeing the data.
In case a new location is needed for the same object, new data will be
added.
However, by doing this the weak locations during dispose may be
invalidated once the weak locations lock is passed, so check again if
this is the case while removing them.
It can happen that a GWeakRef is added to an object while it's disposing
(or even during finalizing) and this may happen in a thread that (weak)
references an object while the disposal isn't completed yet or when
using toggle references and switching to GWeakRef on notification (as
the API suggests).
In such scenario the weak locations are not cleaned up when the object
is finalized, and will point to a free'd area.
So, during finalization and when we're sure that the object will be
destroyed for sure, check again if there are new weak locations and
unset them if any as part of the qdata destruction.
Do this adding a new utility function so that we can avoid duplicating
code to free the weak locations.
Added various tests simulating this case.
Fixes: #2390
This works in the same way as g_variant_take_ref(), and for the same
reason.
Updated and Rebased by Nitin Wartkar <nitinwartkar58@gmail.com>
Closes#1112
Include the base URI in the `g_test_bug()` calls instead. This resolves
inconsistencies between the old bug base (bugzilla.gnome.org) and the
new bug base (gitlab.gnome.org). It also has the advantage that the URI
passed to `g_test_bug()` is now clickable in the code editor, rather
than being split across two locations.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/275#note_303175
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Teach `glib-mkenums` how to parse and ignore:
- `GLIB_AVAILABLE_ENUMERATOR_IN_x_xx`
- `GLIB_DEPRECATED_ENUMERATOR_IN_x_xx`
- `GLIB_DEPRECATED_ENUMERATOR_IN_x_xx_FOR(x)`
Future work could expose the deprecation/availability information as
substitutions in the template file, but this commit does not do that.
It does, however, add some unit tests for the annotations.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2327
Convert all the call sites which use `g_memdup()`’s length argument
trivially (for example, by passing a `sizeof()`), so that they use
`g_memdup2()` instead.
In almost all of these cases the use of `g_memdup()` would not have
caused problems, but it will soon be deprecated, so best port away from
it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2319
This change was previously implemented in
9ba17d511e but got dropped during the
Python conversion of the Perl script.
See the commit message of this commit as well as
https://bugzilla.gnome.org/show_bug.cgi?id=782162
for more information.
This patch also adds a new test so we don't loose this feature again.
Also adds a test that checks that the G_SIGNAL_RUN flags are handled
correctly and the class signal handler is called at the right times.
Fixes https://gitlab.gnome.org/GNOME/glib/issues/513
gobject/tests/ifaceproperties.c: In function ‘base_object_get_type’:
gobject/tests/ifaceproperties.c:321:1: error: missing initializer for field ‘value_table’ of ‘GTypeInfo’ {aka ‘const struct _GTypeInfo’}
321 | static DEFINE_TYPE_FULL (BaseObject, base_object,
| ^~~~~~
In file included from gobject/gobject.h:24,
from gobject/gbinding.h:29,
from glib/glib-object.h:22,
from gobject/tests/ifaceproperties.c:21:
gobject/gtype.h:1063:26: note: ‘value_table’ declared here
1063 | const GTypeValueTable *value_table;
| ^~~~~~~~~~~
gobject/tests/ifaceproperties.c: In function ‘test_iface_get_type’:
gobject/tests/ifaceproperties.c:144:1: error: missing initializer for field ‘class_finalize’ of ‘GTypeInfo’ {aka ‘const struct _GTypeInfo’}
144 | static DEFINE_IFACE (TestIface, test_iface, NULL, test_iface_default_init)
| ^~~~~~
In file included from gobject/gobject.h:24,
from gobject/gbinding.h:29,
from glib/glib-object.h:22,
from gobject/tests/ifaceproperties.c:21:
gobject/gtype.h:1054:26: note: ‘class_finalize’ declared here
1054 | GClassFinalizeFunc class_finalize;
| ^~~~~~~~~~~~~~
gobject/tests/signals.c: In function ‘test_introspection’:
gobject/tests/signals.c:1180:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
1180 | for (i = 0; i < n_ids; i++)
| ^
gobject/tests/properties.c: In function ‘properties_get_property’:
gobject/tests/properties.c:562:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
562 | for (i = 0; i < G_N_ELEMENTS (test_props); i++)
| ^
gobject/tests/properties.c:583:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
583 | for (i = 0; i < G_N_ELEMENTS (test_props); i++)
| ^
gobject/tests/dynamictests.c: In function ‘test_module_get_type’:
gobject/tests/dynamictests.c:97:7: error: missing initializer for field ‘value_table’ of ‘GTypeInfo’ {aka ‘const struct _GTypeInfo’}
97 | };
| ^
In file included from gobject/gobject.h:24,
from gobject/gbinding.h:29,
from glib/glib-object.h:22,
from gobject/tests/dynamictests.c:23:
gobject/gtype.h:1063:26: note: ‘value_table’ declared here
1063 | const GTypeValueTable *value_table;
| ^~~~~~~~~~~
The version of `black` on the CI server wanted these changes. Make them
to keep the `style-check-diff` CI job from constantly failing.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gobject/tests/value.c: In function ‘test_valuearray_basic’:
gobject/tests/value.c:253:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
253 | for (i = 0; i < a->n_values - 1; i++)
| ^
gobject/tests/value.c:257:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
257 | for (i = 0; i < a->n_values; i++)
| ^
These variables were already (correctly) accessed atomically. The
`volatile` qualifier doesn’t help with that.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
http://isvolatileusefulwiththreads.in/c/
It’s possible that the variables here are only marked as volatile
because they’re arguments to `g_once_*()`. Those arguments will be
modified in a subsequent commit.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
This commit is the unmodified results of running
```
black $(git ls-files '*.py')
```
with black version 19.10b0. See #2046.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Add a test for a signal returning interface types, using
the generic marshaller. This will hopefully exercise newly
added code in value_from_ffi_type().
This tests the new functionality that
g_type_interface_instantiable_prerequisite
was added for.
Before the changes, this fails with
GObject-WARNING **: Unable to convert a value of type \
GObject to a value of type Foo
We do the same test with g_object_bind_property_with_closures
as well, to exercise g_cclosure_marshal_generic.
Use the new g_type_interface_instantiable_prerequisite() to check
compatibility for transform functions.
In particular, this allows interfaces (in my case GDK_TYPE_PAINTABLE) to
be transformed to/from any GObject type (in my case G_TYPE_OBJECT) using
the transform function registered to transform between any 2 objects
(g_value_object_transform_value() does a type check and uses NULL if the
types don't match).
And this in turn allows be to g_object_bind_property() a gobject-typed
generic property (GtkListItem::item) to a GtkImage::paintable.
Tests for the new functionality are included.
