Split out XDG_CURRENT_DESKTOP handling to a separate function and make
sure that it drops all the invalid entries properly. Earlier a bad
entry could slip through the checks by sitting just after another bad
entry, like in env being set to `invalid1!:invalid2!`, where
`invalid2!` could slip the checks.
As with previous commits, this could have been used to load private data
for an unprivileged caller.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2168
It could have been used to load private data which would not normally be
accessible to an unprivileged caller.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2168
Its components are used to build filenames, so if the value of
`XDG_CURRENT_DESKTOP` comes from an untrusted caller (as can happen in
setuid programs), using it unvalidated may be unsafe.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2168
As with the previous commit, it’s unsafe to trust the environment when
running as setuid, as it comes from an untrusted caller. In particular,
with D-Bus, the caller could set up a fake ‘system’ bus which fed
incorrect data to this process.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2168
Even if the modules in the given directory never get chosen to be used,
loading arbitrary code from a user-provided directory is not safe when
running as setuid, as the process’ environment comes from an untrusted
source.
Also ignore `GIO_EXTRA_MODULES`.
Spotted by Simon McVittie.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2168
Contrary to what the WSARecvFrom seem to imply, a UDP socket is perfectly recoverable and usable after a WSAECONNRESET error (and, I assume, WSAENETRESET).
However GSocket condition has the FD_READ bit set after a UDP socket fails with WSAECONNRESET, even if no data is available on the socket anymore; this causes select calls to report the socket as readable when, in fact, it's not.
The change resets FD_READ flag on a socket upon the above error conditions; there's no 'if' to filter between datagram and stream sockets as the change should be harmless in the case of stream sockets which are, however, very unlikely to be usable after a WSAECONNRESET.
Realistically any date over 200 bytes long is not going to be valid, so
limit the input length so we can’t spend too long doing UTF-8 validation
or normalisation.
oss-fuzz#28718
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
If the old value is destroyed before updating the TLS value in pthreads
(or the Windows equivalent) then there’s a risk of infinite recursion if
`g_private_replace()` is called from within the `GDestroyNotify`.
Avoid that by destroying the old value after doing the TLS update.
Thanks to Matthias Clasen for diagnosing the issue.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2210
Both are provided by libm, but `isnan()` is provided as a macro, whereas
`isfinite()` is an actual function, and hence libm has to be available
at runtime. That didn’t trivially work on FreeBSD, resulting in this
refactor.
`isfinite(x)` is equivalent to `!isnan(x) && !isinfinite(x)`. The case
of `x` being (negative or positive) infinity is already handled by the
range checks on the next line, so it’s safe to switch to `isnan()` here.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Rather than parsing the seconds in an ISO 8601 date/time using a pair of
floating point numbers (numerator and denominator), use two integers
instead. This avoids issues around floating point precision, and also
makes it easier to check for potential overflow from overlong inputs.
This last point means that the `isfinite()` check can be removed, as it
was covering the case where a NAN was generated, which isn’t now
possible using integer arithmetic.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
NULL is valid return value for the g_unix_mount_get_options function
because mount options are currently provided only by libmount implementation.
However, the gio tool passes the returned value to the g_strescape function
without checking, which produces the following critical warning:
GLib-CRITICAL **: 13:47:15.294: g_strescape: assertion 'source != NULL' failed
Let's add the missing check to prevent the critical warnings.
The fiendish thing about NAN is that it never compares TRUE against
anything, so the limit checks `seconds < 0.0 || seconds >= 60.0` were
never triggering.
oss-fuzz#28473
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
As hidden file caches currently work, every look up on a directory caches
its .hidden file contents, and sets a 5s timeout to prune the directory
from the cache.
This creates a problem for usecases like Tracker Miners, which is in the
business of inspecting as many files as possible from as many directories
as possible in the shortest time possible. One timeout is created for each
directory, which possibly means gobbling thousands of entries in the hidden
file cache. This adds as many GSources to the glib worker thread, with the
involved CPU overhead in iterating those in its main context.
To fix this, use a unique timeout that will keep running until the cache
is empty. This will keep the overhead constant with many files/folders
being queried.
This incidentally also exercises the intended pattern for sending fds in
a D-Bus message: the fd list is meant to contain exactly those fds that
are referenced by a handle (type 'h') in the body of the message, with
numeric handle value n corresponding to g_unix_fd_list_peek_fds(...)[n].
Being able to send and receive file descriptors that are not referenced by
a handle (as in OpenFile here) is a quirk of the GDBus API, and while it's
entirely possible in the wire protocol, other D-Bus implementations like
libdbus and sd-bus typically don't provide APIs that make this possible.
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/2074
Signed-off-by: Simon McVittie <smcv@collabora.com>
Suppose we are sending a 5K message with fds (so data->blob points
to 5K of data, data->blob_size is 5K, and fd_list is non-null), but
the kernel is only accepting up to 4K with each sendmsg().
The first time we get into write_message_continue_writing(),
data->total_written will be 0. We will try to write the entire message,
plus the attached file descriptors; or if the stream doesn't support
fd-passing (not a socket), we need to fail with
"Tried sending a file descriptor on unsupported stream".
Because the kernel didn't accept the entire message, we come back in.
This time, we won't enter the Unix-specific block that involves sending
fds, because now data->total_written is 4K, and it would be wrong to try
to attach the same fds again. However, we also need to avoid failing
with "Tried sending a file descriptor on unsupported stream" in this
case. We just want to write out the data of the rest of the message,
starting from (blob + total_written) (in this exaple, the last 1K).
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/2074
Signed-off-by: Simon McVittie <smcv@collabora.com>
This test ensures that g_socket_client_connect_to_host_async() fails if
it is cancelled, but it's not cancelled until after 1 millisecond. Our
CI testers are hitting that race window, and Milan is able to reproduce
the crash locally as well. Switching it from 1ms to 0ms is enough for
Milan to avoid the crash, but not enough for our CI, so let's move the
cancellation to a GSocketClientEvent callback where the timing is
completely deterministic.
Hopefully fixes#2221
If there is a file descriptor source that has a lower priority
than the one for sources that are going to be dispatched,
all subsequent file descriptor sources (internally sorted by
file descriptor identifier) do not get an update in their GPollRec
and later on wrong sources can be dispatched.
Fix this by first finding the first GPollRec that matches the current
GPollFD, instead of relying on it to be the current one. At
the same time, document the assumptions about the ordering of the
file descriptor records and array and make explicit in the documentation
that the array needs to be passed to g_main_context_check() as it was
received from g_main_context_query().
Added a new test that reproduces the bug by creating two file
descriptor sources and an idle one. Since the first
file descriptor created has a lower identifier and a low priority,
the second one is not dispatched even when it has the same, higher,
priority as the idle source. After fixing this bug, both
higher priority sources are dispatched as expected.
While this patch was written independently, a similar fix for this
bug was first submitted by Eugene M in GNOME/glib!562. Having a
second fix that basically does the same is a reassurance that we
are in the right here.
Fixes#1592
This allows compilers to check the format placeholders properly. It
fixes compilation on clang, which gives a warning about untrusted
strings being passed on to subsequent functions which require format
placeholders.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The addition causes the date to shift
forward into 1st of the next month, because a 0-based offset
is compared to be "more than" the days in the month instead of "more than
or equal to".
This is triggered by corner-cases where transition date is 6 days
off the end of the month and our calculations put it at N+1th day of the
month (where N is the number of days in the month). The subtraction should
be triggered to move the date back a week, putting it 6 days off the end;
for example, October 25 for CET DST transition; but due to incorrect comparison
the date isn't shifted back, we add 31 days to October 1st and end up
at November 1st).
Fixes issue #2215.
