In file gio/gtestdbus.c, function watch_parent, there is a loop which
waits for commands sent from the parent process and kills all processes
recorded in 'pids_to_kill' array on parent process exit. The detection
of parent process exit is done by calling g_poll and checking whether
the returned event is G_IO_HUP. However, 'revents' is a bit mask, and
we should use a bitwise-AND check instead of the equality check here.
It seems to work fine on Linux, but it fails on FreeBSD because the
g_poll returns both G_IO_IN and G_IO_HUP on pipe close. This means the
watcher process continues waiting for commands after the parent process
exit, and g_io_channel_read_line returns G_IO_STATUS_EOF with 'command'
set to NULL. Then the watcher process crashes with segfault when calling
sscanf because 'command' is NULL. Since the test result is already
reported by the parent process as 'OK', this kind of crash is likely to
be unnoticed unless someone checks dmesg messages after the test:
pid 57611 (defaultvalue), uid 1001: exited on signal 11
pid 57935 (actions), uid 1001: exited on signal 11
pid 57945 (gdbus-bz627724), uid 1001: exited on signal 11
pid 57952 (gdbus-connection), uid 1001: exited on signal 11
pid 57970 (gdbus-connection-lo), uid 1001: exited on signal 11
pid 57976 (gdbus-connection-sl), uid 1001: exited on signal 11
pid 58039 (gdbus-exit-on-close), uid 1001: exited on signal 11
pid 58043 (gdbus-exit-on-close), uid 1001: exited on signal 11
pid 58047 (gdbus-exit-on-close), uid 1001: exited on signal 11
pid 58051 (gdbus-exit-on-close), uid 1001: exited on signal 11
pid 58055 (gdbus-export), uid 1001: exited on signal 11
pid 58059 (gdbus-introspection), uid 1001: exited on signal 11
pid 58065 (gdbus-names), uid 1001: exited on signal 11
pid 58071 (gdbus-proxy), uid 1001: exited on signal 11
pid 58079 (gdbus-proxy-threads), uid 1001: exited on signal 11
pid 58083 (gdbus-proxy-well-kn), uid 1001: exited on signal 11
pid 58091 (gdbus-test-codegen), uid 1001: exited on signal 11
pid 58095 (gdbus-threading), uid 1001: exited on signal 11
pid 58104 (gmenumodel), uid 1001: exited on signal 11
pid 58108 (gnotification), uid 1001: exited on signal 11
pid 58112 (gdbus-test-codegen-), uid 1001: exited on signal 11
pid 58116 (gapplication), uid 1001: exited on signal 11
pid 58132 (dbus-appinfo), uid 1001: exited on signal 11
If the watcher process crashes before killing the dbus-daemon process
spawned by the parent process, the dbus-daemon process will keep running
after all tests complete. Due to the implementation of 'communicate'
function in Python subprocess, it causes meson to crash. 'communicate'
assumes the stdout and stderr pipes are closed when the child process
exits, but it is not true if processes forked by the child process
doesn't exit. It causes Python subprocess 'communicate' function to
block on the call to poll until the timeout expires even if the test
finishes in a few seconds. Meson assumes the timeout exception always
means the test is still running. It calls 'communicate' again and
crashes because pipes no longer exist.
https://gitlab.gnome.org/Infrastructure/GitLab/issues/286https://github.com/mesonbuild/meson/issues/3967https://bugs.python.org/issue30154
Previously, glocalfile.c would not set file system metadata for
the free/used key for file systems which reported 0 free space. This is
because some file systems don’t set that metadata when you call
statfs(), so we can’t reliably report it. However, some do, and they
can legitimately set f_bavail and f_bfree to 0 if the file system is
full.
In order to avoid that, always set the file system metadata unless the
file system is FUSE or ncpfs.
This is a partial revert of commit 0b9f24c1e1: instead of the changes
made in that commit, I think we should maintain a blacklist of file
systems which are known to not correctly report free space.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/328
Similar issue was fixed with commit f929d148, but it's happening again.
Define G_MESSAGES_DEBUG=all when running CI to ensure we won't regress
anymore.
g_object_bind_property() (transfer none) returns a GBinding with an existing internal
reference which is active as long as the "binding" is. This allows to optionally use
the binding without any memory management, as it will remove itself when it is no longer
needed.
There are currently three ways to remove the "binding" and as a result the reference:
1) Either the source or target dies and we get notified by a weakref callback
2) The user unrefs the binding until it is destroyed (which is semi-legal,
but worked and is used in the test suite)
3) The user calls g_binding_unbind()
In case (3) the problem was that it always calls unref even if the "binding" is already
gone, leading to crashes when called from bindings multiple times.
In #1373 and !197 it was noticed that a function always unrefs which would be a
"transfer full" annotation, but the problem here is that it should only remove the
ref when removing the "binding" and the annotation should stay "transfer none".
As a side effect of this fix it is now also possible to call g_binding_unbind() multiple
times where every call after the first is a no-op.
This also adds explicit tests for case (1) and (3) - only case (3) is affected by this change.
In order to determine whether to trash a file to the home directory, we
compare its st_dev to our home directory's st_dev field.
This is the wrong thing to do on overlayfs when deleting files, because
st_dev contains the ID of the filesystem providing the file (which can
be the lower or upper filesystem), but directories always return the ID
of the overlayfs. Thus the comparison fails and we are unable to trash
the file.
Fix this by checking st_dev of the parent directory when we are deleting
a file.
Also adjust `test_trash_not_supported` for this - make its st_dev check
look at the parent directory's `st_dev` rather than the temporary file's
own.
Fixes#1027.
The documentation was unclear about what error codes would be returned
on attempting to open an empty or corrupt GVDB file. Previous versions
of the documentation incorrectly said that corrupt GVDB files were
considered equivalent to empty ones.
A recent commit has clarified the documentation to include its error
handling behaviour.
Update the two users of GVDB within GLib, GResource and GSettingsSource,
to follow this change, and add unit tests for them both.
Other users of the GVDB copylib will need to update their copy and make
appropriate changes if they have bugs in their handling of this
situation. dconf is one example of this. GVDB should be updated from
https://gitlab.gnome.org/GNOME/gvdb.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1454
glibc string.h declares memcpy() with attribute(nonnull(1,2)), causing
calls with NULL arguments to be treated as undefined behaviour.
This is consistent with ISO C99 and C11, which state that passing 0
to string functions as an array length does not remove the requirement
that the pointer to the array is a valid pointer.
gcc -fsanitize=undefined catches this while running OSTree's test suite.
Similarly, running the GLib test suite reports similar issues for
qsort(), memmove(), memcmp().
(This is a partial cherry-pick of commit e5ed410c8c from GLib.)
Signed-off-by: Simon McVittie <smcv@debian.org>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=775510
Reviewed-by: Colin Walters
GVDB is essentially part of GLib, so should have the same maintainer
list.
At least this way, it’s not just maintained by one absentee maintainer.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Some of the test vectors don’t specify a timezone, so the local one is
used; the comparisons to the expected results (which are in UTC) then
fail.
See discussion in
https://gitlab.gnome.org/GNOME/glib/merge_requests/225.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Part of runMkenumsWithHeader() was duplicated in test_reproducible(),
and would otherwise need to be duplicated again in upcoming tests. Many
places duplicated decoding stdout/stderr and checking the exit code.
Introduce a named tuple for the returned fields; and factor out writing
a template file to pass with --template.
When calculating the value of a timezone offset, ensure that any offsets
done with negative numbers are done in a signed integer.
oss-fuzz#9815
Signed-off-by: Philip Withnall <withnall@endlessm.com>
