check_expected_events is heavily modified in this commit to tolerate
event loss and allow renaming to be reported as creation and deletion.
This fixes test failure on FreeBSD.
Previously, kqueue file monitor only add event sources for directories
regardless of the type of the file being monitored. Doing so may be
possible on inotify, but it is not sufficient on kqueue. Watching a
directory on kqueue doesn't report changes made to files under it, and
we must watch files themselves to get notified. This problem is fixed
by adding a second watch for non-directory file monitors, and the result
is that we are now able to receive 'CHANGED' and 'ATTRIBUTE_CHANGED'
events for non-directory files.
Since having two watches on one file monitor requires many code changes
to work properly, this commit also changes the following things:
- NOTE_ALL macro is now replaced by note_all inline function. Since the
kqueue backend is shared by all BSD operating systems, there are a
few difference between these systems. It is easier to do '#ifdef'
check in a function than in a macro.
- Both g_kqueue_file_monitor_callback and g_kqueue_file_monitor_cancel
now holds a lock before accessing kqueue_sub structs. This fixes a
crash when these two functions are called from different threads,
causing g_kqueue_file_monitor_callback to access freed memory.
- 'mask' variable in g_kqueue_file_monitor_callback is now removed.
The usage of 'mask' was wrong because of the 'mask > 0' check.
'CHANGED' event has value 0 so the 'mask > 0' check made it
impossible to emit 'CHANGED' events.
- kqueue-missing scans can now be triggered from the kqueue event
callback instead of always waiting for 4 seconds.
- Don't remove a file from kqueue on unlink unless its hard link count
has dropped to zero.
- Don't use 'else if' in the check of 'fflags'. It is possible for a
kevent to have multiple flags set.
- Don't use g_file_monitor_emit_event directly. Always use
g_file_monitor_source_handle_event to report events.
Events submitted to g_file_monitor_emit_event are delivered
immediately, but events sent to g_file_monitor_source_handle_event
are scheduled by GLocalFileMonitor. If we mix the two, the order of
events will be wrong and tests will fail.
- Report 'CHANGES_DONE_HINT' immediately after 'CREATED' if the file
created is not a regular file. This is copied from ih_event_callback.
This function only calls fsync() if @target exists and is non-empty. If
not, it doesn't provide the "old contents or new contents" guarantee
that one might expect. This has been the case since
d20a188b12, and is justified either as a
performance optimization or by asserting that this function only
guarantees to not destroy existing data (implicitly defining
non-existence or emptiness as not data).
In addition, explicitly spell out that whether it's atomic in the
non-empty case is system-dependent. If the system administrator has
configured some funky filesystem options, they may be out of luck on the
atomicity front.
https://gitlab.gnome.org/GNOME/glib/issues/1302
This fits better with the convention in the rest of GLib where arbitrary
8-bit values are represented as guint8, avoiding the potential confusing
of a name which references ‘char’s.
This is not an API break, as both guint8 and guchar are unconditionally
typedeffed to unsigned char.
https://gitlab.gnome.org/GNOME/glib/issues/896
There seems to be little point in substituting the version number into
README (using autotools). Rename it to README.md and distribute that
verbatim (with autotools and Meson) instead.
Autotools still requires that README exists, so leave a stub README file
in place which redirects people to README.md. This can be dropped when
we drop autotools support.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
GVfs utils used to have bash completion, which was pretty useful. However,
it hasn't been ported to gio tool unfortunately. GLib provides completion
for various utils already, so it would be nice to provide completion also
for gio tool. I've updated old bash completion code and merged with some
my old unmerged fixes.
The gvfs completion used "gvfs-ls --show-completions" helper. This mentioned
option hasn't been obviously ported to "gio list" and the proposed completion
doesn't add this option in "gio list" to not pollute the codes, but maybe it
is a bit slower as consequence.
The proposed bash completion suggests subcommands, uris and paths including
the remote mounts. It contains some workarounds, especially because of proper
handling of paths with colons and other special chars (like spaces)...
Since it’s deprecated in favour of positional arguments, including it in
the help output is confusing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
These generate basic .c and .h files containing the GDBusInterfaceInfo
for a D-Bus introspection XML file, but no other code (no skeletons,
proxies, GObjects, etc.).
This is useful for projects who want to describe their D-Bus interfaces
using introspection XML, but who wish to implement the interfaces
manually (for various reasons, typically because the skeletons generated
by gdbus-codegen are too simplistic and limiting). Previously, these
projects would have had to write the GDBusInterfaceInfo manually, which
is painstaking and error-prone.
The new --interface-info-[body|header] options are very similar to
--[body|header], but mutually exclusive with them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
Recursive annotations do seem to be supported, so we should support them
properly in the type system representation. This currently introduces no
behavioural changes, but will be used in upcoming commits.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
People do (and should) use g_str_equal() for string comparisons outside
of hash tables, because it’s easier to read than
`strcmp (str1, str2) == 0`. That should not be discouraged.
However, we should still be careful to point out that g_str_equal() is
not NULL-safe, and g_strcmp0() is.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
We don’t strictly require this, but given that our CI runs it, we
essentially never test with 0.46.0, so it might as well be broken.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It's been 4 years and 8 development cycles since we introduced
G_ADD_PRIVATE and offset-based private data access. It is now
time to finally deprecate the old mechanism.
Closes: #699
This is to avoid race between dispose() being called on the
GFdoNotificationBackend instance, and any pending operations which are
still waiting on a D-Bus reply when it’s disposed.
(thx to Philip Withnall for pointing that out)
Signed-off-by: Arnaud Rebillout <elboulangero@gmail.com>
Previously, calling:
g_dbus_is_supported_address ("some-imaginary-transport:", NULL)
correctly returned FALSE; but calling:
g_dbus_is_supported_address ("some-imaginary-transport:", &error)
crashed with:
GLib-GIO:ERROR:../gio/gdbusaddress.c:434:g_dbus_is_supported_address:
assertion failed: (ret || (!ret && (error == NULL || *error != NULL)))
This was because, if the address component did not start with a known
transport, no error was set. Fix this, reusing an error string used by
the corresponding else branch in g_dbus_address_connect(), and adjust
the test to pass both NULL and non-NULL GError **s to this function in
every test case. This case:
g_assert (!g_dbus_is_supported_address ("some-imaginary-transport:foo=bar;unix:path=/this/is/valid", NULL));
would have caught this bug with a non-NULL GError **.
The way things were before: a FreedesktopNotification struct is
allocated before the dbus call, and this same struct is possibly re-used
for other dbus calls. If the server becomes unavailable, the callback
will be invoked after the call times out, which leaves a long time where
other dbus calls can happen, re-using the same FreedesktopNotification
as user data. When the first call times out, the callback is invoked,
and the user data is freed. Subsequent calls that used the same user
data will time out later on, and try to free a pointer that was already
freed, hence segfaults.
This bug can be reproduced in Cinnamon 3.6.7, as mentioned in:
<https://github.com/linuxmint/Cinnamon/issues/7491>
This commit fixes that by always allocating a new
FreedesktopNotification before invoking dbus_call(), ensuring that the
callback always have a valid user data.
Signed-off-by: Arnaud Rebillout <elboulangero@gmail.com>
A slightly modified patch originally written by Morten Welinder
<terra@gnome.org> to make the error codes returned by g_spawn_*()
functions more specific when on Windows. They are already this specific
on Linux.
Add a unit test for the ENOENT case.
https://gitlab.gnome.org/GNOME/glib/issues/303
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The error number was saved after some g_debug() and g_free() calls, in
various places, which meant it could have been overwritten since the
error we care about happened.
https://gitlab.gnome.org/GNOME/glib/issues/303
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Use a GOnce to make sure we only warn about notifications not being
supported on Windows once, rather than on each attempted notification.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: https://gitlab.gnome.org/GNOME/glib/issues/1234
