Add two new methods to GProxyAddress for recovering information about
the destination URI that the proxy was created for (and modify
GProxyAddressEnumerator to set that information when creating the
GProxyAddress).
In the async case, a failed DNS lookup was causing the proxy
resolution to bail out immediately, rather than just moving on to the
next potential proxy (which might not need us to do the DNS lookup
beforehand). Fix that.
This is mostly complete, sans support for activation. However, its
not as picky as the libdbus implementation in terms like validation
and limits checking, nor is it as tested.
Its can be useful to test gdbus if dbus-daemon is not availible, but
its main reason for existance is to implement a default session bus
on win32 so that e.g. GApplication is guaranteed to work.
If a GInputStream does not provide a read_async() implementation, but
does implement GPollableInputStream, then instead of doing
read-synchronously-in-a-thread, just use
g_pollable_input_stream_read_nonblocking() and
g_pollable_input_stream_create_source() to implement an async read in
the same thread. Similarly for GOutputStream.
Remove a bunch of existing read_async()/write_async() implementations
that are basically equivalent to the new fallback method.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
Implement GPollableInputStream in GMemoryInputStream and
GConverterInputStream, and likewise implement GPollableOutputStream in
the corresponding output streams.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
Move g_pollable_source_new() here from gpollableinputstream.c, add
g_pollable_source_new_full(), and add some new methods to do either
blocking or nonblocking reads depending on a boolean argument.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
Make g_pollable_input_stream_read() and
g_pollable_output_stream_write() look a little bit more like the
non-pollable versions in terms of error handling, etc. Also, use the
read_fn and write_fn virtual methods directly rather than calling
g_input_stream_read()/g_output_stream_write(), to avoid problems with
re-entrancy involving the "pending" flag.
Also belatedly add single-include guards to the header files.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
The loop was using a GConverterResult variable where it meant to use a
gssize, and since GConverterResult was ending up as an unsigned type,
this meant the (res < 0) check always failed.
Resources are always little endian, so the gvdb is byteswapped. When looking
up the value, it would return a new byteswapped variant, making the data
returned from do_lookup() invalid once that variant is unref'd. Since
byteswapping doesn't matter for the "ay" data anyway, just use
gvdb_table_get_raw_value() instead and only byteswap the length and flag
values.
https://bugzilla.gnome.org/show_bug.cgi?id=673409
* Add resolver functions for looking up DNS records of
various types. Currently implemented: MX, TXT, SOA, SRV, NS
* Return records as GVariant tuples.
* Make the GSrvTarget lookups a wrapper over this new
functionality.
* Rework the resolver test so that it has support for
looking up MX, NS, SOA, TXT records, and uses GOptionContext
https://bugzilla.gnome.org/show_bug.cgi?id=672944
This patch solves two problems:
First, it allows builders to optionally cut the circular dependency
between dbus and glib by disabling the modular tests (just like how
the tests can be disabled in dbus).
Second, the tests are entirely pointless to build if cross-compiling.
It also moves us slightly closer to the long term future we want where
the tests are a separate ./configure invocation and run against the
INSTALLED glib, not the one in the source tree. This would allow us to
run the tests constantly, not just when glib is built.
https://bugzilla.gnome.org/show_bug.cgi?id=667806
For quite some time the recommended usage of GSettings and dconf has
been to use paths like /org/gnome/example/. Use of /apps/ has spilled
over from GConf and is continuing to make its way into a number of
applications as they port.
glib-compile-schemas will now warn about these types of paths being
used. This generates a lot of noise, but hopefully it will reduce the
number of ported applications making this mistake.
Turns out libdbus doesn't send struct ucred credentials on linux, but
just relies on the SO_PEERCRED support. However, gdbus does send, and
expect to recieve a ucred credential. So, when libdbus talks to a
gdbus server the authentication fails to send the credentials.
We fix this by falling back to g_socket_get_credentials() if we don't
get any credential messages.
When presented with an array of empty arrays of 8-byte-aligned types,
GDBus would incorrectly apply the 8-byte alignment when reading back.
https://bugzilla.gnome.org/show_bug.cgi?id=673612
Signed-off-by: David Zeuthen <davidz@redhat.com>
D-Bus arrays are serialized as follows:
1. align to a 4-byte boundary (for the length)
2. uint32: the length of the serialized body in bytes
3. padding for the alignment of the body type (not included in the length)
4. the body.
Note that 3. is a no-op unless the body type is an 8-byte aligned type
(uint64, int64, double, struct, dict_entry), since you are always on a
4-byte boundary from aligning and writing the length.
So, an empty aax (that is, an array containing zero arrays of int64)
is serialized as follows:
1. align to a 4-byte boundary
2. length of the contents of this (empty) array, in bytes (0)
3. align to a 4-byte boundary (the child array's alignment requirement)
4. there is no body.
But previously, GDBus would recurse in step three to align not just for
the type of the child array, but for the nonexistent child array's
contents. This only affects the algorithm when the grandchild type has
8-byte alignment and the reader happened to not already be on an 8-byte
boundary, in which case 4 bytes were spuriously skipped.
https://bugzilla.gnome.org/show_bug.cgi?id=673612
Signed-off-by: David Zeuthen <davidz@redhat.com>
The code that is checking the userinfo part was accidentally
given a pointer to the end of the userinfo, so it was not
checking the right portion of the string at all.
gio/gproxyresolver.h: GProxyResolver already documented in gio/giotypes.h
gio/gtlsbackend.h: GTlsBackend already documented in gio/gtlsbackend.c
gio/gtlsclientconnection.h: GTlsClientConnection already documented in gio/gtlsclientconnection.c
gio/gtlsconnection.h: GTlsConnection already documented in gio/gtlsconnection.c
gio/gunixconnection.h: GTcpConnection already documented in gio/giotypes.h
glib/gversion.h: GLIB_CHECK_VERSION already documented in glib/gversion.c
Found these thanks to the improved gobject-introspection
GTK-Doc comment block/annotation parser.
See https://bugzilla.gnome.org/show_bug.cgi?id=672254https://bugzilla.gnome.org/show_bug.cgi?id=673385
GDBus heavily relies on idles for some of its cleanup operations,
and not running a mainloop leads to things not getting cleaned
up properly, which in turn leads to test failures, since the
session bus singleton does not get removed.
This program is only used indirectly from gapplication.c in
tests, but that is no reason to let it segfault when it is
run from the commandline without arguments.
This is needed because glib-mkenums doesn't handle #ifdef values in
enums, and so it needs to have all values always defined in the enum.
When not available, define the missing values to a negative value.
g_input_stream_read() does state that it returns 0 on end of file, but
not in the Returns: line, so it's easy to miss on a quick skim-read.
g_input_stream_read_async() documents that g_input_stream_read_finish()
returns 0 on end of file, but g_input_stream_read_finish() itself does
not.
https://bugzilla.gnome.org/show_bug.cgi?id=673174
On some systems gelf.h may not be stored under the top level include
directory in which case we need to add the correct include paths in
cflags by using pkg-config(1).
GDBusProxy sets an error on a GSimpleAsyncResult and then returns
without dispatching the result for completion (and leaks the result in
the process). Fix that.
Also add a testcase. Unfortunately, adding the testcase uncovered
bug #672248. We can work around that by reordering the tests.
https://bugzilla.gnome.org/show_bug.cgi?id=672249
When building with MinGW/MSYS with srcdir != builddir the build fails:
- to locate the generated .def files
- creating libglib-gdb.py
- creating libgobject-gdb.py
Solved this by explicitly instructing these files to be generated
in $(builddir)/...
https://bugzilla.gnome.org/show_bug.cgi?id=653167
Now that we're using g_simple_async_result_set_check_cancellable() we
no longer need this terrible hack of carrying the GCancellable on the
GSimpleAsyncResult using qdata. See bug 672013 for more details.
https://bugzilla.gnome.org/show_bug.cgi?id=672013
Signed-off-by: David Zeuthen <davidz@redhat.com>
Call g_simple_async_result_set_check_cancellable() after all
GSimpleAsyncResult creation in order to take advantage of the new
reliable cancellation feature.
The guarantee of reliable cancellation fixes a bug in dbusmenu (which
was already assuming that cancellation was reliable). See this bug:
https://bugs.launchpad.net/ubuntu/+source/libdbusmenu/+bug/953562https://bugzilla.gnome.org/show_bug.cgi?id=672013
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add a function g_simple_async_result_set_check_cancellable() to provide
a GCancellable that is checked for being cancelled during the call to
g_simple_async_result_propagate_error().
This gives asynchronous operation implementations an easy way to
provide reliable cancellation of those operations -- even in the case
that a positive result has occured and is pending dispatch at the time
the operation is cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=672013
If there are no modules installed then the most appropriate thing is to
have no cachefile instead of an empty one. This unbreaks the "clean
directory after 'make uninstall'" check that automake does.
https://bugzilla.gnome.org/show_bug.cgi?id=671664
Otherwise we get criticals a'la
GLib-GIO-CRITICAL **: g_cancellable_release_fd: assertion `cancellable->priv->fd_refcount > 0' failed
when reading/writing to certain kinds of file descriptors.
Patch reviewed by Dan Winship on IRC.
Signed-off-by: David Zeuthen <davidz@redhat.com>
We were attempting to unregister our ownership of our D-Bus name even in
the case that we were non-unique (ie: we didn't actually own the name).
Rework the logic a bit to prevent that: for non-unique, we leave
impl->bus_name as NULL and we only register/unregister if it is
non-NULL.
If an application (such as Nautilus) wants to show a sidebar with
devices group into different groups such as "Devices" and "Network",
it's currently up to the application itself to do the classification
(for example by looking at the URI scheme for the activation root,
e.g. smb://).
This patch adds a new identifier G_VOLUME_IDENTIFIER_KIND_CLASS that
can be set by volume monitors and used by applications.
See https://bugzilla.gnome.org/show_bug.cgi?id=668295
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add new macros to disable -Wdeprecated-declarations around a piece of
code, using the C99 (and GNU89) _Pragma() operator. Replace the
existing use of #pragma for this in gio, and suppress the warnings in
gvaluearray.c as well.
https://bugzilla.gnome.org/show_bug.cgi?id=669671
Unix and Windows gio GSocket behaves differently when the socket is
closed by the peer. On Unix, the client receives pending data before
receiving HUP. But on Windows, the HUP may come before, resulting in
unreliable and racy code. We should have same behaviour on all
platforms.
According to MSDN documentation: "an application should check for
remaining data upon receipt of FD_CLOSE to avoid any possibility of
losing data."
https://bugzilla.gnome.org/show_bug.cgi?id=669810
For a number of reasons it might be useful to register the object paths
associated with a non-unique application so that the application can at
least field requests to its unique D-Bus name.
https://bugzilla.gnome.org/show_bug.cgi?id=647986
g_file_read() was returning G_IO_ERROR_IS_DIRECTORY when you tried to
open a directory on unix, but G_IO_ERROR_PERMISSION_DENIED on win32.
Fix that, and add a test to tests/file.c
Pointed out on IRC by Paweł Forysiuk.
https://bugzilla.gnome.org/show_bug.cgi?id=669330
This is useful when using certain D-Bus services where the
PropertiesChanged signal does not include the property value such as
e.g. various systemd mechanisms, see e.g.
https://bugs.freedesktop.org/show_bug.cgi?id=37632
Signed-off-by: David Zeuthen <davidz@redhat.com>
==1265== 84 (8 direct, 76 indirect) bytes in 1 blocks are definitely lost in loss record 793 of 827
==1265== at 0x4029467: calloc (vg_replace_malloc.c:467)
==1265== by 0x408479B: standard_calloc (gmem.c:104)
==1265== by 0x4084846: g_malloc0 (gmem.c:189)
==1265== by 0x4084B2D: g_malloc0_n (gmem.c:385)
==1265== by 0x4228A98: g_resource_load (gresource.c:253)
==1265== by 0x804A56D: test_resource_registred (resources.c:198)
==509== 700 (20 direct, 680 indirect) bytes in 1 blocks are definitely lost in loss record 828 of 837
==509== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==509== by 0x4084724: standard_malloc (gmem.c:85)
==509== by 0x40847C7: g_malloc (gmem.c:159)
==509== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==509== by 0x405396B: g_bytes_new_with_free_func (gbytes.c:173)
==509== by 0x405390D: g_bytes_new_take (gbytes.c:122)
==509== by 0x804A48C: test_resource_data (resources.c:174)
==29204== 11,456 (84 direct, 11,372 indirect) bytes in 1 blocks are definitely lost in loss record 859 of 861
==29204== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==29204== by 0x4084724: standard_malloc (gmem.c:85)
==29204== by 0x40847C7: g_malloc (gmem.c:159)
==29204== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==29204== by 0x409B227: g_slice_alloc0 (gslice.c:1029)
==29204== by 0x41936CF: g_type_create_instance (gtype.c:1872)
==29204== by 0x417CCC9: g_object_constructor (gobject.c:1839)
==29204== by 0x417C6F4: g_object_newv (gobject.c:1703)
==29204== by 0x417CC5A: g_object_new_valist (gobject.c:1820)
==29204== by 0x417C1DB: g_object_new (gobject.c:1535)
==29204== by 0x41E5E29: g_converter_input_stream_new (gconverterinputstream.c:204)
==29204== by 0x4228D38: g_resource_open_stream (gresource.c:363)
This bug was exposed by fixing the following leak in the resources test:
==29204== 11,456 (84 direct, 11,372 indirect) bytes in 1 blocks are definitely lost in loss record 859 of 861
==29204== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==29204== by 0x4084724: standard_malloc (gmem.c:85)
==29204== by 0x40847C7: g_malloc (gmem.c:159)
==29204== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==29204== by 0x409B227: g_slice_alloc0 (gslice.c:1029)
==29204== by 0x41936CF: g_type_create_instance (gtype.c:1872)
==29204== by 0x417CCC9: g_object_constructor (gobject.c:1839)
==29204== by 0x417C6F4: g_object_newv (gobject.c:1703)
==29204== by 0x417CC5A: g_object_new_valist (gobject.c:1820)
==29204== by 0x417C1DB: g_object_new (gobject.c:1535)
==29204== by 0x41E5E29: g_converter_input_stream_new (gconverterinputstream.c:204)
==29204== by 0x4228D38: g_resource_open_stream (gresource.c:363)
==29204== 7,192 (76 direct, 7,116 indirect) bytes in 1 blocks are definitely lost in loss record 855 of 861
==29204== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==29204== by 0x4084724: standard_malloc (gmem.c:85)
==29204== by 0x40847C7: g_malloc (gmem.c:159)
==29204== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==29204== by 0x409B227: g_slice_alloc0 (gslice.c:1029)
==29204== by 0x41936CF: g_type_create_instance (gtype.c:1872)
==29204== by 0x417CCC9: g_object_constructor (gobject.c:1839)
==29204== by 0x417C6F4: g_object_newv (gobject.c:1703)
==29204== by 0x417CC5A: g_object_new_valist (gobject.c:1820)
==29204== by 0x417C1DB: g_object_new (gobject.c:1535)
==29204== by 0x424E815: g_zlib_decompressor_new (gzlibdecompressor.c:270)
==29204== by 0x4228DD8: g_resource_lookup_data (gresource.c:422)
==28778== 700 (20 direct, 680 indirect) bytes in 1 blocks are definitely lost in loss record 842 of 863
==28778== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==28778== by 0x4084724: standard_malloc (gmem.c:85)
==28778== by 0x40847C7: g_malloc (gmem.c:159)
==28778== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==28778== by 0x405396B: g_bytes_new_with_free_func (gbytes.c:173)
==28778== by 0x405390D: g_bytes_new_take (gbytes.c:122)
==28778== by 0x804C2B1: test_uri_query_info (resources.c:435)
==28318== 38 (12 direct, 26 indirect) bytes in 1 blocks are definitely lost in loss record 613 of 865
==28318== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==28318== by 0x4084724: standard_malloc (gmem.c:85)
==28318== by 0x40847C7: g_malloc (gmem.c:159)
==28318== by 0x4084AB4: g_malloc_n (gmem.c:361)
==28318== by 0x4229599: g_resources_enumerate_children (gresource.c:806)
==28318== by 0x804B39E: test_resource_registred (resources.c:283)
==27820== 31 bytes in 1 blocks are definitely lost in loss record 587 of 866
==27820== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==27820== by 0x4084724: standard_malloc (gmem.c:85)
==27820== by 0x40847C7: g_malloc (gmem.c:159)
==27820== by 0x4084AB4: g_malloc_n (gmem.c:361)
==27820== by 0x409D6A1: g_strdup (gstrfuncs.c:356)
==27820== by 0x4069FF7: g_get_current_dir (gfileutils.c:2544)
==27820== by 0x804BCA7: test_resource_module (resources.c:370)
==27020== 44 (24 direct, 20 indirect) bytes in 1 blocks are definitely lost in loss record 684 of 936
==27020== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==27020== by 0x4084724: standard_malloc (gmem.c:85)
==27020== by 0x40847C7: g_malloc (gmem.c:159)
==27020== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==27020== by 0x40BC038: g_variant_get_child_value (gvariant-core.c:969)
==27020== by 0x40B5277: g_variant_get_variant (gvariant.c:749)
==27020== by 0x4273182: gvdb_table_value_from_item (gvdb-reader.c:478)
==27020== by 0x42731E8: gvdb_table_get_value (gvdb-reader.c:509)
==27020== by 0x4228B36: do_lookup (gresource.c:280)
==27020== by 0x4228F56: g_resource_get_info (gresource.c:492)
==26427== 24 bytes in 1 blocks are definitely lost in loss record 608 of 965
==26427== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==26427== by 0x4084724: standard_malloc (gmem.c:85)
==26427== by 0x40847C7: g_malloc (gmem.c:159)
==26427== by 0x409B1E1: g_slice_alloc (gslice.c:1003)
==26427== by 0x40BC038: g_variant_get_child_value (gvariant-core.c:969)
==26427== by 0x40BA89F: g_variant_valist_get (gvariant.c:4482)
==26427== by 0x40BAC23: g_variant_get_va (gvariant.c:4681)
==26427== by 0x40BAB29: g_variant_get (gvariant.c:4633)
==26427== by 0x4228BA5: do_lookup (gresource.c:293)
==26427== by 0x4228F51: g_resource_get_info (gresource.c:493)
Helper scripts in C can be problematic for cross compiling: the compiler
produces executables for the target platform, which the host is usually
unable to run.
https://bugzilla.gnome.org/show_bug.cgi?id=669224
The glib-compile-resources --generate-dependencies call was failing,
although not stopping the build.
Failed to open file 'test2.gresource.xml': No such file or directory
Failed to open file 'test3.gresource.xml': No such file or directory
Failed to open file 'test4.gresource.xml': No such file or directory
Failed to open file 'test.gresource.xml': No such file or directory
We need to do this because constructors run before main() and
thus before any call to g_mem_set_vtable, making it impossible to
use that function if constructors call g_malloc.
We do this by making the constructors just register the static data
for lazy registration, doing the lazy registration when using
the global resource set.
With this we're not longer exporting the constructor headers, which means
we're not tying ourselves to a macro that might need special tweaking on
a compiler-by-compiler basis.
It's important to have strict rules for handling of whitespace in
translated strings in GSettings schema files so that the tools
extracting the messages will end up with the same messages as the
runtime calling gettext().
The rules are designed to be simple and unambiguous yet cover most
normal uses in a convenient way.
Those rules are as follows (with rationale):
- for <default> tags, the text content has its leading and trailing
whitespace stripped off, but internal whitespace is not modified in
any way.
This allows for slightly more flexible use of whitespace without
causing that whitespace to appear in the strings for translation.
- for <summary> and <description> tags, the content is split into
paragraphs. Paragraphs are separated by two or more sequential
newline characters. Each paragraph has its leading and trailing
whitespace removed and all other whitespace is normalised to a
single ascii space character. Finally, the paragraphs are rejoined,
inserting exactly two newlines between them.
This allows for longer explanations (particularly in the description
tag) using a natural format that, when normalised, will display
nicely in toolkits.
This patch implements the rules for <default> tags. The schema compiler
currently ignores <summary> and <description> tags.
First, correct a rather dubious case of accessing a GSettingsSchemaKey
after clearing it. This was technically okay because only the key name
was accessed (and it is not owned by the struct) but it looks very
wrong.
Second, have g_settings_backend_write() sink the passed in GVariant*.
Not all backends get this right, and I'm starting to like the pattern of
virtual function wrappers being responsible for sinking the parameters
that they are documented as consuming.
GValueArray was deprecated in bug 667228 and since we never change the
size of the array, it was kinda dumb to just GValueArray in the first
place.
https://bugzilla.gnome.org/show_bug.cgi?id=667228
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is needed for thread-safety ... yes, it would have been better to
make get_object() return a full reference and have something like a
peek_object() method return a borrowed reference for C convenience
(only a single vfunc would have been needed). But such an ABI break is
too late now...
Signed-off-by: David Zeuthen <davidz@redhat.com>
It's hardly useful to bloat the resource data with blanks intended only
for human readability, so add a preprocessing option that uses xmllint --noblanks
to strip these.
Bug #667929.
Some platforms don't have the source-specific multicast sockopts, and
so would fail to compile. Fix that (and return an error if the caller
tries to use source-specific). Also clarify the docs a bit.
https://bugzilla.gnome.org/show_bug.cgi?id=668468
This lets you poke at resources in elf files and
standalone resource bundles. So far, only listing
and extracting resources is supported. The support
for elf files requires libelf.
g_settings_create_action() will create a GAction for the named key,
allowing it to be added to the action group of the application (so that
the setting can be directly manipulated from menus, for example).
https://bugzilla.gnome.org/show_bug.cgi?id=668279
glib-compile-schemas used to generate these. They're harmless and they
mean that no schemas are installed in a particular directory, so just
ignore them.
https://bugzilla.gnome.org/show_bug.cgi?id=656301
==13007== 173 bytes in 1 blocks are definitely lost in loss record 90 of 106
==13007== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==13007== by 0x407DDBA: standard_malloc (gmem.c:85)
==13007== by 0x407E318: g_try_malloc (gmem.c:271)
==13007== by 0x40654DE: g_file_get_contents (gfileutils.c:756)
==13007== by 0x804A531: main (glib-compile-resources.c:580)
==13007== 521 (56 direct, 465 indirect) bytes in 1 blocks are definitely lost in loss record 100 of 106
==13007== at 0x402AD89: malloc (vg_replace_malloc.c:236)
==13007== by 0x407DDBA: standard_malloc (gmem.c:85)
==13007== by 0x407E160: g_malloc (gmem.c:159)
==13007== by 0x4091D8D: g_slice_alloc (gslice.c:1003)
==13007== by 0x40674A1: g_hash_table_new_full (ghash.c:676)
==13007== by 0x804B252: gvdb_hash_table_new (gvdb-builder.c:76)
==13007== by 0x43C66B2: (below main) (libc-start.c:226)
g_bus_get_finish() and g_bus_get_sync() both document that the returned
object will usually have exit-on-close set to TRUE, but the property's
documentation specified that its default is FALSE. While that's
technically true from a GObject perspective, it's not accurate from the
API user's perspective.
https://bugzilla.gnome.org/show_bug.cgi?id=668163
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: David Zeuthen <zeuthen@gmail.com>
Initial underscores are used in c identifier to make them private,
for instance in Gtk+. However, we don't want to have this in the
resource section name, that just looks ugly.
Apparently IPV6_JOIN_GROUP and IPV6_LEAVE_GROUP are more portable than
IPV6_ADD_MEMBERSHIP and IPV6_DROP_MEMBERSHIP. (Windows and Linux have
both, but OS X only has the latter.)
struct sin6_addr has two additional fields that struct sin_addr
doesn't. Add support for those to GInetSocketAddress, and make sure
they don't get lost when converting between glib and native types.
https://bugzilla.gnome.org/show_bug.cgi?id=635554
If a class implements GAsyncInitable, and its parent also implements
it, then the subclass needs to call its parent's init_async() before
running its own. This was made more complicated by the fact that the
default init_finish() behavior was handled by the wrapper method
(which can't be used when making the super call) rather than the
default implementation itself. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=667375
When the flags enum only has the default NONE = 0 entry, glib-mkenums
creates an enum type for it, not a flags type. Add an annotation to the
enum to ensure the correct GType is created.
Bug #667938.
GResource is a bundle of files combined into a single binary blog.
The API lets you access the files the resource contains by
using resource paths. You can also register resources with a
global list and access these globally in a merged resource namespace.
The normal way this is used is to link in the resources into your
application/library and have it be automatically registred.
Resources are compiled from an xml description using
glib-compile-resources.
This is implemented by with statfs_buffer.f_bavail (free blocks
for unprivileged users) as a default way to retrieve real free space.
Based on a patch by Marcus Carlson, bug 625751.
g_socket_receive_with_blocking() and g_socket_send_with_blocking claim
to return -1 in error, their return type is gssize, and yet they
return FALSE if the initial g_return_val_if_fail() call fails.
https://bugzilla.gnome.org/show_bug.cgi?id=667226
==24706== 52 bytes in 1 blocks are definitely lost in loss record 7,248 of 13,092
==24706== at 0x4A074CD: malloc (vg_replace_malloc.c:236)
==24706== by 0x70E9F5F: standard_malloc (gmem.c:85)
==24706== by 0x70E9FE8: g_malloc (gmem.c:159)
==24706== by 0x71018EC: g_slice_alloc (gslice.c:1003)
==24706== by 0x710192B: g_slice_alloc0 (gslice.c:1029)
==24706== by 0x7068526: g_type_create_instance (gtype.c:1872)
==24706== by 0x705067B: g_object_constructor (gobject.c:1835)
==24706== by 0x704FE47: g_object_newv (gobject.c:1699)
==24706== by 0x7050612: g_object_new_valist (gobject.c:1816)
==24706== by 0x704F894: g_object_new (gobject.c:1531)
==24706== by 0x6F0F2F0: g_inet_address_new_from_bytes (ginetaddress.c:459)
==24706== by 0x6F5D703: remove_network (gnetworkmonitornetlink.c:256)
==24706== by 0x6F5DD80: read_netlink_messages (gnetworkmonitornetlink.c:386)
==24706== by 0x6F2D5CA: socket_source_dispatch (gsocket.c:2505)
==24706== by 0x70E1D45: g_main_dispatch (gmain.c:2513)
==24706== by 0x70E2A06: g_main_context_dispatch (gmain.c:3050)
==24706== by 0x70E2BE9: g_main_context_iterate (gmain.c:3121)
==24706== by 0x70E2CAD: g_main_context_iteration (gmain.c:3182)
==24706== by 0x6F60A05: g_application_run (gapplication.c:1599)
==24706== by 0x42D011: main (ephy-main.c:472)
https://bugzilla.gnome.org/show_bug.cgi?id=667098
Some of the GLib tests deliberately provoke warnings (or even fatal
errors) in a forked child. Normally, this is fine, but under valgrind
it's somewhat undesirable. We do want to follow fork(), so we can check
for leaks in child processes that exit gracefully; but we don't want to
be told about "leaks" in processes that are crashing, because there'd
be no point in cleaning those up anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=666116
This can be used for debugging, or for progress UIs ("Connecting to
example.com..."), or to do low-level tweaking on the connection at
various points in the process.
https://bugzilla.gnome.org/show_bug.cgi?id=665805
Previously it was more or less assumed that GSocketConnections were
always connected, although this was not enforced. Make it explicit
that they don't need to be, and add methods to connect them, and
simplify GSocketClient by using those methods.
https://bugzilla.gnome.org/show_bug.cgi?id=665805
41e5ba86a7 introduced some changes to the
property flags of GAction. These changes were not a reflection of the
actual interface of GAction but were necessary due to GObject being
overly-sensitive to flag changes on property overrides.
Now that the GObject bug is fixed, we can restore the GAction flags to
their correct values.
https://bugzilla.gnome.org/show_bug.cgi?id=666615
It happens that one wants to customize settings for plugins or
shell extensions, that installing schemas in nonstandard locations.
This patch adds the --schemadir option to gsettings, and ensure
that the appropriate schema is found.
https://bugzilla.gnome.org/show_bug.cgi?id=666415
