Previously, if you created a GUnixInputStream or GUnixOutputStream
from a non-blocking file descriptor, it might sometimes return
G_IO_ERROR_WOULD_BLOCK from g_input_stream_read/g_output_stream_write,
which is wrong. Fix that. (Use the GPollableInput/OutputStream methods
if you want non-blocking I/O.)
Also, add a test for this to gio/tests/unix-streams.
Also, fix the GError messages to say "Error reading from file
descriptor", etc instead of "Error reading from unix" (which was
presumably from a bad search and replace job).
https://bugzilla.gnome.org/show_bug.cgi?id=626866
Add GNetworkMonitor and its associated extension point, provide a base
implementation that always claims the network is available, and a
netlink-based implementation built on top of that that actually tracks
the network state.
https://bugzilla.gnome.org/show_bug.cgi?id=620932
We didn't previously test anything except the implicit default of TRUE.
Now we test implicit TRUE, explicit TRUE, explicit FALSE, and
disconnecting at the local end (which regressed while fixing Bug #651268).
Also avoid some questionable use of a main context, which fell foul of
Bug #658999 and caused this test to be disabled in master.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=662100
Bug-NB: NB#287088
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: David Zeuthen <davidz@redhat.com>
GDBusConnection sets the closed flag in the worker thread, then adds an
idle callback (which refs the Connection) to signal this in the main
thread. The tests session_bus_down doesn't spin the mainloop, so the
"closed" signal will always fire if iterating the mainloop later (and
drops the ref when doing so). But _is_closed can return TRUE even before
signalling this, in which case the "closed" signal isn't fired and the
ref isn't dropped, causing the test to fail.
Instead simply always wait for the closed signal, which is a good thing
to check anyway and ensures the ref is closed.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=661896
Reviewed-by: Matthias Clasen <mclasen@redhat.com>
And remove the 'joinable' argument from g_thread_new() and
g_thread_new_full().
Change the wording in the docs. Clarify expectations for
(deprecated) g_thread_create().
If the connection to the bus is lost while a method call is ongoing,
the method call does not get cancelled. Instead it just sits around
until it times out.
This is visible here on XO laptops when stopping the display manager
during shutdown. imsettings starts sending a sync message to give up
its bus name (via g_bus_unown_name()), then systemd terminates the
session bus at approximately the same time. imsettings then hangs for
about 20 seconds before timing out the message.
http://lists.freedesktop.org/archives/dbus/2011-September/014717.html
imsettings behaviour could be improved as described in that thread,
but I think this is a glib bug. I've also come up with the attached
patch which fixes it.
Credits for the bug-fix goes to Daniel Drake <dsd@laptop.org>. The test
case was written by David Zeuthen <zeuthen@gmail.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=660637
Signed-off-by: David Zeuthen <davidz@redhat.com>
Since it is valid for a D-Bus interface / service to add new methods,
signals or properties we must NEVER warn about unknown properties or
drop unknown signals or disallow unknown method invocations when we
have an expected interface.
So this means that the expected_interface machinery is only useful for
checking that the service didn't break ABI.
Also update the docs so it is clear exactly what it means to have an
expected interface.
https://bugzilla.gnome.org/show_bug.cgi?id=660886
Signed-off-by: David Zeuthen <davidz@redhat.com>
These were the last users of the dynamic allocation API.
Keep the uses in glib/tests/mutex.c since this is actually meant to test
the API (which has to continue working, even if it is deprecated).
https://bugzilla.gnome.org/show_bug.cgi?id=660739
This reverts commit c841c2ce3f.
This approach has been an unmitigated disaster. We're getting all sorts
of crashes due to functions that are returning NULL because they can't
find the schema for the default value. The people who get these crashes
are then confused about the root cause of the problem and waste a lot of
time trying to figure it out.
Until we find a better solution, we should go back to what we had
before.
https://bugzilla.gnome.org/show_bug.cgi?id=655366
This tests the interaction between mimeinfo.cache, defaults.list and
mimeapps.list to ensure g_app_info_set_as_last_used_for_type doesn't
incorrectly change the default.
https://bugzilla.gnome.org/show_bug.cgi?id=658188
The documentation for G_TYPE_CHAR says:
"The type designated by G_TYPE_CHAR is unconditionally an 8-bit signed
integer."
However the return value for g_value_get_char() was just "char" which
in C has an unspecified signedness; on e.g. x86 it's signed (which
matches the GType), but on e.g. PowerPC or ARM, it's not.
We can't break the old API, so we need to suck it up and add new API.
Port most internal users, but keep some tests of the old API too.
https://bugzilla.gnome.org/show_bug.cgi?id=659870
The GApplication test case tried to fork() while using GMainLoop,
causing problems. Avoid doing that by splitting the child process into
a separate program and spawning it in the usual way.
https://bugzilla.gnome.org/show_bug.cgi?id=658999
In particular, remove the libasyncns import, which was only used by
GUnixResolver, which is only used when threads are not available.
Likewise remove GWin32Resolver, and the hacky broken non-threaded
parts of GIOScheduler.
https://bugzilla.gnome.org/show_bug.cgi?id=616754
The threaded tests are using the default main context in the worker
thread, but were not g_main_context_acquire()ing it first, which meant
that g_tls_interaction_invoke_ask_password() in the main thread would
sometimes succeed in acquiring it itself and thus performing the
operation in the wrong thread. Fix that.
Also, we can't unref the loop from the worker thread, because the main
thread isn't holding a reference on it, and so it might end up being
destroyed while that thread is still inside g_main_loop_quit().
(which shouldn't ever have been part of the API. Grr.)
Solaris /etc/services doesn't even have "http", which was causing
tests/network-address to fail...
* Add 'invoke' style method, which can be used to call an interaction
from any thread. The interaction will be run in the appropriate
#GMainContext
* Sync methods can be called whether main loop is running or not.
* Derived classes can choose to implement only sync or async
interaction method, and the invoke method will fill in the blanks.
* Documentation for the above.
* Tests for the above.
https://bugzilla.gnome.org/show_bug.cgi?id=657567
The test was using a socket in a temporary directory, but not actually
creating that temporary directory. This worked fine on Linux since it
actually ended up using an abstract socket instead, but failed on
unixes without abstract sockets.
https://bugzilla.gnome.org/show_bug.cgi?id=657517
The docs for g_socket_set_timeout() claimed that if an async operation
timed out, the GIOCondition passed to the source callback would be
G_IO_IN or G_IO_OUT (thus prompting the caller to call
g_socket_receive/send and get a G_IO_ERROR_TIMED_OUT), but in fact it
ended up being 0, and gio/tests/socket.c was erroneously testing for
that instead of the correct value. Fix this.
* Add cancellable argument to g_tls_interaction_ask_password
and g_tls_interaction_ask_password_async.
* This is API breakage, but this API has not yet been released
in a stable release (and very unlikely used yet).
* Since we're breaking unreleased API, expand amount of padding
on GTlsInteractionClass because we're going to need it.
https://bugzilla.gnome.org/show_bug.cgi?id=656443
Rework property getters to use a vfunc so we can take the fast path
and avoid allocating memory for both the skeleton and the proxy
cases. This requires some special case because of how GVariant expects
you to free memory in some cases, see #657100. Add test cases for
this.
Document the _get_ functions as not being thread-safe and also
generate _dup_ C getters (which are thread-safe).
Mark all the generated _get_, _dup_ and _set_ as (skip) as non-C
languages should just use GObject properties and not the (socalled)
"C binding".
Signed-off-by: David Zeuthen <davidz@redhat.com>
* Update documentation to note that GCancellable can be used
concurrently by multiple operations.
* Add documentation to g_cancellable_reset that behavior is
undefined if called from within cancelled handler.
* Add test for multiple concurrent operations using the same
cancellable.
https://bugzilla.gnome.org/show_bug.cgi?id=656387
Destroying a GDBusProxy in a thread used to race with NameOwnerChanged
being delivered to the main context's thread (GNOME #651133).
Also, g_dbus_proxy_call_sync in a thread would race with NameOwnerChanged
being delivered to the main context's thread and rewriting the name_owner
(GNOME #656039).
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=656039
Bug-NB: NB#259760
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Zeuthen <davidz@redhat.com>
The database is an abstract object implemented by the various TLS
backends, which is used by GTlsConnection to lookup certificates
and keys, as well as verify certificate chains.
Also add GTlsInteraction, which can be used to prompt the user
for a password or PIN (used with the database).
https://bugzilla.gnome.org/show_bug.cgi?id=636572
Otherwise, we may run into trouble as opening a peer-to-peer
connection uses a socket client, which uses a proxy resolver
which may end up using gsettings, whose dconf backend may end
up using the session bus to talk to dconfd...
Also add convenience _with_unix_fd_list variants to GDBusConnection,
GDBusProxy and GDBusMethodInvocation types to easily support this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is possible now that we have better support for object path
arrays, see
http://git.gnome.org/browse/glib/commit/?id=19878998bc386db78614f1c92ff8524a81479c7b
Note that this breaks the ABI of generated code but since
gdbus-codegen(1) has never yet been in a stable GLib release, this is
fine.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This commit represents an API break to GAction in the following ways:
- the 'set_state' entry in the GActionInterface vtable has been
renamed to 'change_state'. The number and order of vtable items has
not otherwise changed.
- g_action_set_state() has been renamed to g_action_change_state() to
match the updated vtable entry.
- the "state" property of the GAction interface has been changed to
read-only to reflect the fact that g_action_set_state() no longer
exists.
- GSimpleActionClass has been hidden. GSimpleAction can no longer be
subclassed.
>> Rationale
g_action_set_state() has never been a true setter in the sense that
calling it will update the value of the "state" property. It has always
been closer to "request 'state' to be changed to this value" with
semantics defined by the implementor of the interface. This is why the
equivalent method in GActionGroup had its name changed from 'set' to
'change'. This change makes the two interfaces more consistent and
removes any implication about the effect that calling set_state() should
have on the 'state' property.
>> Impact
This incompatible API break was undertaken only because I strongly
suspect that it will go entirely unnoticed. If the break actually
affects anybody, then we will accommodate them (possibly going as far as
to revert this commit entirely).
The virtual table change only impacts implementors of GAction. I
strongly suspect that this is nobody (except for GSimpleAction).
The hiding of GSimpleActionClass only impacts impacts subclasses of
GSimpleAction. I strongly suspect that none of these exist.
The changing of the property to be read-only only affects people who
were trying to change the state by using GObject properties. I strongly
suspect that this is nobody at all.
The removal of the g_action_set_state() call is the most dangerous, but
I still suspect that it will impact nobody outside of GLib. If anybody
is impacted by this change then, at their request, I will reintroduce
the API as a deprecated alias for g_action_change_state().
... otherwise we might end up using the worker after it has been
freed. Reported by Dan Winship and Colin Walters.
This fix uncovered a bug in the /gdbus/nonce-tcp test case so "fix"
that as well to use a better way of having one thread wait for another
(using quotes for the word "fix" since it's pretty hackish to
busy-wait in one thread to wait for another).
Signed-off-by: David Zeuthen <davidz@redhat.com>
These will validate the resulting line, and throw a conversion error.
In practice these will likely be used by bindings, but it's good
for even C apps too that don't want to explode if that text file
they're reading into Pango actually has invalid UTF-8.
https://bugzilla.gnome.org/show_bug.cgi?id=652758
This avoids the generated types (e.g. ExampleAnimal, ExampleCat,
ExampleObject and ExampleObjectManagerClient) being referenced in the
core gio docs. This was requested by Matthias.
Signed-off-by: David Zeuthen <davidz@redhat.com>
.. and add a C setter to do this. Also make the C getter return a
reference since the property may be set from another thread. Also
change the constructor to _not_ take a GDBusConnection since this is
something you almost always want to do _after_ creating it. The
API/ABI break is fine as there has never been a GLib release with this
type.
https://bugzilla.gnome.org/show_bug.cgi?id=648959
Signed-off-by: David Zeuthen <davidz@redhat.com>
_GNU_SOURCE must be defined before including any other (system)
header, so defining it in glib-unix.h (and hoping no one has included
anything else before that) is wrong. And the "#define _USE_GNU"
workaround for this problem in gnetworkingprivate.h is even wronger
(and still prone to failure anyway due to single-include guards).
Fix this by defining _GNU_SOURCE in config.h when building against
glibc. In theory this is bad because new releases of glibc may include
symbols that conflict with glib symbols, which could then cause
compile failures. However, most people only see new releases of glibc
when they upgrade their distro, at which point they also generally get
new releases of gcc, which have new warnings/errors to clean up
anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=649201
Specific changes
- Use get_type(), not get_gtype() for the GType function
- so we need to use the lower-case name type_ for properties called type
- Don't return a function pointer, just make the function returned
available instead
- Add (type) annotations in constructors so g-ir-scanner detects them as such
- Add (transfer none) annotations to property getters
- Add (out) annotations to D-Bus method call functions
Signed-off-by: David Zeuthen <davidz@redhat.com>
A fairly typical pattern is to have code that does
foo_set_bar (object, "");
if (some_condition)
{
foo_set_bar (object, "yes");
}
where some_condition is often true every time @object is updated.
With this code, bar is essentially always "yes" but because of how
gdbus-codegen works, useless PropertiesChanged events got scheduled
and sent out. With this patch, we avoid that by always keeping the
original value around and comparing it only when we deem it's time to
send out the ::PropertiesChanged signal (typically in an idle but can
be forced by the user via flush()).
Also add a test case for this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Older versions of libdbus would let you construct an invalid
DBusMessage, but that's a bug, which will be fixed in 1.4.8/1.5.0.
Instead, construct a valid message of the same length, then replace
substrings in the serialized blob with their invalid counterparts.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=646326
Signed-off-by: David Zeuthen <davidz@redhat.com>
... this was causing a GDBus test-case to fail so now that it is
fixed, also reenable the test case.
https://bugzilla.gnome.org/show_bug.cgi?id=631379
Signed-off-by: David Zeuthen <davidz@redhat.com>
And use this for a) documentation purposes; and b) to preserve C ABI
when an interface is extended. See
https://bugzilla.gnome.org/show_bug.cgi?id=647577#c5
for more details. Also add test cases for this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Several flaws were pointed out by Shaun McCance. We were
leaking handled arguments, and we were mishandling the last
argument, and we were actually skipping arguments too.
https://bugzilla.gnome.org/show_bug.cgi?id=647031
When using GOption to handle commandlines, we need to disable
the builtin help handling, since it calls exit(). Also mention
this particular pitfall in the docs.
We were getting our length zero, yet NULL-terminated arrays in
a twist in some places. Stop passing around ignored length arguments
at the same time.
https://bugzilla.gnome.org/show_bug.cgi?id=635099
This commit also changes (maintaining compatibility) the way
user-specified default applications are stored (as in, those for which
g_app_info_set_as_default_for_type() has been called.
We now store the default application for a content type in a new group
in the mimeapps.list keyfile, and "Added Associations" tracks only the
applications that have been added by the user, following a
most-recently-used first order.
This is useful in GtkAppChooser-like widgets to pre-select the last used
application when constructing a widget.
https://bugzilla.gnome.org/show_bug.cgi?id=636311
This adds an extension point for TLS connections to gio, with a
gnutls-based implementation in glib-networking.
Full TLS support is still a work in progress; the current API is
missing some features, and parts of it may still be changed before
2.28.
https://bugzilla.gnome.org/show_bug.cgi?id=588189
When interfacing with APIs that expect unix-style async I/O, it is
useful to be able to tell in advance whether a read/write is going to
block. This adds new interfaces GPollableInputStream and
GPollableOutputStream that can be implemented by a GInputStream or
GOutputStream to add _is_readable/_is_writable, _create_source, and
_read_nonblocking/_write_nonblocking methods.
Also, implement for GUnixInput/OutputStream and
GSocketInput/OutputStream
https://bugzilla.gnome.org/show_bug.cgi?id=634241
Otherwise, attempting to create a GSocketConnection from the socket
will likely return the wrong type, since the protocol won't match any
of the registered subtypes.
Also add the start of a GSocket test program (from davidz).
https://bugzilla.gnome.org/show_bug.cgi?id=627171
Makes explicit the fact that you are interacting with the individual
action rather than the group and removes potential namespace conflicts
with classes implementing the interface (like g_application_activate()
vs g_application_activate_action()).
The test case was passing a guint16 to g_object_get() for a guint
property. That's invalid on all systems, although it works (more or
less) on little endian ones. On big endian it's a total no-go.
In its previous form, g_settings_list_schemas() was not useful as a tool
to prevent aborts due to using g_settings_new() with an invalid schema
name. This is because g_settings_list_scheams() also listed relocatable
schemas, and calling g_settings_new() for those would abort just the
same as if you called it for a non-existent schema.
Modify g_settings_list_schemas() so that it only returns schemas for
which it is safe to call g_settings_new(). Add another call for sake of
completeness: g_settings_list_relocatable_schemas().
Implement the first of two features requested in the bug: when
encountering a broken .xml schema file, back out the changes in that
file and continue to parse other files.
This prevents a single broken .xml file from messing up GSettings for
everyone else.
Add a --strict option to get the old behaviour. Use this from the test
cases.
It doesn't really work right now because of a dbus-daemon(1) bug - see
the comment added in the TODO section of gdbusconnection.c. So revert
to old behavior. The downside is a lot of files in /tmp but right now
that's better than not being able to run tests in a loop.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Without this fix, the ./gdbus-connection test case occasionally fails, see
https://bugzilla.gnome.org/show_bug.cgi?id=629945#c5
like this
/gdbus/connection/basic: OK
/gdbus/connection/life-cycle: **
ERROR:gdbus-connection.c:223:test_connection_life_cycle: assertion failed:
(!quit_mainloop_fired)
cleaning up bus with pid 21794
Aborted (core dumped)
because the callback didn't happen on the same thread as where we are
running the loop.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Since we make message buses come and go, we need to ensure that the
singleton connection instance goes away before attempting to call
g_bus_get_sync() or similar.
Signed-off-by: David Zeuthen <davidz@redhat.com>
When under load, a one second timeout is just not enough. This can be
observed by e.g. restarting a CPU- and IO-intensive application like a
web browser with many tabs while running the test cases. Therefore,
bump the timeouts to 30 seconds.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Turns out that GDBusWorker will issue callbacks (in its own thread)
even after g_dbus_worker_stop() has been called. This would rarely
happen (and unreffing a connection is even rarer) so only saw this bug
occasionally when running the gdbus-connection test case in a loop.
Fix up this issue by maintaining a set of GDBusConnection objects that
are currently "alive" and do nothing in the callbacks if the passed
user_data pointer is not in this set.
Also attempted to fix up a race condition with
_g_object_wait_for_single_ref_do() and its use of GObject toggle
references - for now, just resort to busy waiting, thereby
sidestepping the toggle reference mess altogether.
Signed-off-by: David Zeuthen <davidz@redhat.com>
These functions are meant to replace the read_until() flavour, with the
following improvements:
- consistency between the synchronous and asynchronous versions as to
if the separator character is read (it never is).
- support for using a nul byte as a separator character by way of
addition of a length parameter which allows stop_chars to be treated
as a byte array rather than a nul-terminated string.
The read_until() functions are not yet formally deprecated, but a note
has been added to the documentation warning not to use them as they will
be in the future.
This is bug #584284.
The root problem is with GObject - for now, just work around it in
GDBus. Also include a test-case. See
https://bugzilla.gnome.org/show_bug.cgi?id=627724
for more information.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Ryan pointed out that it's safe to do this because we have the
G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag and that it simplifies
how filter functions work.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Otherwise things probably won't work in a garbage-collected world
(consider the trivial GC that never collects garbage).
This commit breaks GDBusServer ABI. No known released software is
using this code.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Rework filter functions as per
https://bugzilla.gnome.org/show_bug.cgi?id=624546#c8
This commit breaks ABI. However, this ABI break affects only
applications using filter functions. The only known user of is dconf.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Don't actually use this yet as that will require a couple of
modifications to the filter function signature. This is part of the
bug-fix for
https://bugzilla.gnome.org/show_bug.cgi?id=624546#c8
Signed-off-by: David Zeuthen <davidz@redhat.com>
==23341== 65 bytes in 3 blocks are definitely lost in loss record 927 of 1,020
==23341== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==23341== by 0x4057094: g_malloc (gmem.c:134)
==23341== by 0x40573DB: g_malloc_n (gmem.c:281)
==23341== by 0x40717FC: g_strdup (gstrfuncs.c:101)
==23341== by 0x4147F56: value_lcopy_string (gvaluetypes.c:313)
==23341== by 0x4123F0B: g_object_get_valist (gobject.c:1643)
==23341== by 0x41240FF: g_object_get (gobject.c:1731)
==23341== by 0x804C39E: test_basic (gdbus-proxy.c:522)
Bug #628331.
==23341== 85 (24 direct, 61 indirect) bytes in 1 blocks are definitely lost in loss record 900 of 971
==23341== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==23341== by 0x4057094: g_malloc (gmem.c:134)
==23341== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==23341== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==23341== by 0x403A751: g_error_new_valist (gerror.c:54)
==23341== by 0x403AAD4: g_set_error (gerror.c:240)
==23341== by 0x420B807: decode_method_reply (gdbusconnection.c:4774)
==23341== by 0x420C2BA: g_dbus_connection_call_sync (gdbusconnection.c:5188)
==23341== by 0x421B7C9: g_dbus_proxy_call_sync (gdbusproxy.c:2477)
==23341== by 0x804BD89: test_bogus_method_return (gdbus-proxy.c:430)
Bug #628331.
==29535== 56 (24 direct, 32 indirect) bytes in 1 blocks are definitely lost in loss record 1,112 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804D63A: test_nonce_tcp (gdbus-peer.c:1229)
==29535== 107 (24 direct, 83 indirect) bytes in 1 blocks are definitely lost in loss record 1,188 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804D8E8: test_nonce_tcp (gdbus-peer.c:1259)
==29535== 112 (24 direct, 88 indirect) bytes in 1 blocks are definitely lost in loss record 1,193 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804D79A: test_nonce_tcp (gdbus-peer.c:1248)
==29535== 73 (24 direct, 49 indirect) bytes in 1 blocks are definitely lost in loss record 1,152 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804C6CE: test_peer (gdbus-peer.c:803)
Bug #628331.
==6793== 32 (24 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 779 of 1,423
==6793== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==6793== by 0x4057094: g_malloc (gmem.c:134)
==6793== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==6793== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==6793== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==6793== by 0x412372A: g_object_constructor (gobject.c:1482)
==6793== by 0x4122E1D: g_object_newv (gobject.c:1266)
==6793== by 0x4122B93: g_object_new (gobject.c:1178)
==6793== by 0x41DB4F9: g_unix_fd_list_new (gunixfdlist.c:159)
==6793== by 0x804AADD: test_interface_method_call (gdbus-peer.c:172)
Bug #628331.
==4616== 46 (32 direct, 14 indirect) bytes in 1 blocks are definitely lost in loss record 193 of 305
==4616== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==4616== by 0x4057094: g_malloc (gmem.c:134)
==4616== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==4616== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==4616== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==4616== by 0x412372A: g_object_constructor (gobject.c:1482)
==4616== by 0x4123147: g_object_newv (gobject.c:1347)
==4616== by 0x41236BB: g_object_new_valist (gobject.c:1463)
==4616== by 0x4122BB4: g_object_new (gobject.c:1181)
==4616== by 0x41B2D0F: g_network_address_new (gnetworkaddress.c:262)
==4616== by 0x8048A70: test_basic (network-address.c:10)
Bug #628331.
==14059== 96 bytes in 2 blocks are definitely lost in loss record 520 of 543
==14059== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==14059== by 0x4057094: g_malloc (gmem.c:134)
==14059== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==14059== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==14059== by 0x41385BB: g_type_create_instance (gtype.c:1867)
==14059== by 0x411E72A: g_object_constructor (gobject.c:1482)
==14059== by 0x411DE1D: g_object_newv (gobject.c:1266)
==14059== by 0x411DB93: g_object_new (gobject.c:1178)
==14059== by 0x42296AF: _g_local_file_input_stream_new (glocalfileinputstream.c:152)
==14059== by 0x422281F: g_local_file_read (glocalfile.c:1322)
==14059== by 0x418A8A9: open_read_async_thread (gfile.c:5050)
==14059== by 0x41B71BB: run_in_thread (gsimpleasyncresult.c:853)
==14059== by 0x41A5FBC: io_job_thread (gioscheduler.c:181)
==14059== by 0x407DCDE: g_thread_pool_thread_proxy (gthreadpool.c:314)
==14059== by 0x407C6B0: g_thread_create_proxy (gthread.c:1897)
==14059== by 0x57D918: start_thread (pthread_create.c:301)
==14059== by 0x4C6CBD: clone (clone.S:133)
Bug #628331.
==2464== 80 (16 direct, 64 indirect) bytes in 1 blocks are definitely lost in loss record 515 of 547
==2464== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2464== by 0x4057094: g_malloc (gmem.c:134)
==2464== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2464== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2464== by 0x41385BB: g_type_create_instance (gtype.c:1867)
==2464== by 0x411E72A: g_object_constructor (gobject.c:1482)
==2464== by 0x411DE1D: g_object_newv (gobject.c:1266)
==2464== by 0x411DB93: g_object_new (gobject.c:1178)
==2464== by 0x4220D74: _g_local_file_new (glocalfile.c:310)
==2464== by 0x422C897: g_local_vfs_get_file_for_path (glocalvfs.c:84)
==2464== by 0x41CA91C: g_vfs_get_file_for_path (gvfs.c:94)
==2464== by 0x418C1B6: g_file_new_for_path (gfile.c:5898)
==2464== by 0x8049509: test1_thread (contexts.c:110)
==2464== 80 (16 direct, 64 indirect) bytes in 1 blocks are definitely lost in loss record 516 of 547
==2464== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2464== by 0x4057094: g_malloc (gmem.c:134)
==2464== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2464== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2464== by 0x41385BB: g_type_create_instance (gtype.c:1867)
==2464== by 0x411E72A: g_object_constructor (gobject.c:1482)
==2464== by 0x411DE1D: g_object_newv (gobject.c:1266)
==2464== by 0x411DB93: g_object_new (gobject.c:1178)
==2464== by 0x4220D74: _g_local_file_new (glocalfile.c:310)
==2464== by 0x422C897: g_local_vfs_get_file_for_path (glocalvfs.c:84)
==2464== by 0x41CA91C: g_vfs_get_file_for_path (gvfs.c:94)
==2464== by 0x418C1B6: g_file_new_for_path (gfile.c:5898)
==2464== by 0x804964D: test_context_independence (contexts.c:144)
Bug #628331.
==2429== 49 (24 direct, 25 indirect) bytes in 1 blocks are definitely lost in loss record 276 of 355
==2429== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2429== by 0x4057094: g_malloc (gmem.c:134)
==2429== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2429== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2429== by 0x403A8A6: g_error_new_literal (gerror.c:117)
==2429== by 0x403AC31: g_set_error_literal (gerror.c:314)
==2429== by 0x4175525: g_buffered_input_stream_read_byte (gbufferedinputstream.c:880)
==2429== by 0x804A21A: test_read_byte (buffered-input-stream.c:153)
Bug #628331.
==2428== 256 bytes in 1 blocks are definitely lost in loss record 591 of 604
==2428== at 0x4005CD2: realloc (vg_replace_malloc.c:476)
==2428== by 0x40571A5: g_realloc (gmem.c:181)
==2428== by 0x4075287: g_string_maybe_expand (gstring.c:395)
==2428== by 0x40760D8: g_string_insert_c (gstring.c:1049)
==2428== by 0x4074D41: g_string_append_c_inline (gstring.h:153)
==2428== by 0x4075B3C: g_string_append_uri_escaped (gstring.c:822)
==2428== by 0x41A46AC: g_icon_to_string_tokenized (gicon.c:164)
==2428== by 0x41A498F: g_icon_to_string (gicon.c:252)
==2428== by 0x8049E1A: test_g_icon_serialize (g-icon.c:222)
Bug #628331.
==12763== 16,777,215 bytes in 1 blocks are possibly lost in loss record 357 of 357
==12763== at 0x4004F1B: calloc (vg_replace_malloc.c:418)
==12763== by 0x405711D: g_malloc0 (gmem.c:157)
==12763== by 0x8048ED6: test_basic (data-output-stream.c:40)
Bug #628331.
==2426== 45,034 bytes in 4,094 blocks are definitely lost in loss record 358 of 361
==2426== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2426== by 0x4057094: g_malloc (gmem.c:134)
==2426== by 0x40573DB: g_malloc_n (gmem.c:281)
==2426== by 0x4071ABD: g_strconcat (gstrfuncs.c:315)
==2426== by 0x804916A: test_read_lines (data-output-stream.c:83)
Bug #628331.
==12351== 45,045 bytes in 4,095 blocks are definitely lost in loss record 377 of 380
==12351== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==12351== by 0x4057094: g_malloc (gmem.c:134)
==12351== by 0x40573DB: g_malloc_n (gmem.c:281)
==12351== by 0x4071ABD: g_strconcat (gstrfuncs.c:315)
==12351== by 0x8049811: test_read_lines (data-input-stream.c:99)
Bug #628331.
==2415== 45,045 bytes in 4,095 blocks are definitely lost in loss record 393 of 399
==2415== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2415== by 0x4057094: g_malloc (gmem.c:134)
==2415== by 0x417FC29: g_data_input_stream_read_line (gdatainputstream.c:797)
==2415== by 0x8049874: test_read_lines (data-input-stream.c:111)
==12088== 360 bytes in 40 blocks are definitely lost in loss record 368 of 381
==12088== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==12088== by 0x4057094: g_malloc (gmem.c:134)
==12088== by 0x417FF4C: g_data_input_stream_read_until (gdatainputstream.c:914)
==12088== by 0x8049B6F: test_read_until (data-input-stream.c:182)
Bug #628331.
