Previously, some of the doc comments for platform-independent APIs were
in `gdesktopappinfo.c`, which is only built on Unix systems. This meant
the introspection annotations for those APIs were not used on non-Unix
systems, which caused platform differences in `Gio-2.0.gir`.
So, move those doc comments to `gappinfo.c` and put them next to some
new platform-independent wrapper functions which provide a consistent
entry point and location for the API preconditions.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3399
On g_cancellable_cancel() we were increasing the GCancellable ref count
before emitting the ::cancelled signal, this is a safe thing to do but
it was happening while the cancellable was locked, and this may have
potentially waken up some toggle notifications.
To prevent this, reference the GCancellable just before locking.
GCancellable is meant to be used in multi-thread operations but all the
cancellable instances were sharing a single mutex to synchronize them
which can be less optimal when many instances are in place.
Especially when we're doing a lock/unlock dances that may leave another
thread to take the control of a critical section in an unexpected way.
This in fact was leading to some races in GCancellableSources causing
leaks because we were assuming that the "cancelled" callback was always
called before our dispose implementation.
As per this, use per-instance mutexes.
The lock is also now used only to protect the calls that may interact
with cancelled state or that depends on that, as per this we can just
reduce it to the cancel and reset case, other than to the connect one to
prevent the race that we could have when connecting to a cancellable
that is reset from another thread.
We don't really need to release the locks during callbacks now as they
are per instance, and there's really no function that we allowed to call
during a ::cancelled signal callback that may require an unlocked state.
This could been done in case with a recursive lock, that is easy enough
to implement but not really needed for this case.
Fixes: #2309, #2313
Currently, the trash functionality is disabled for system internal mounts.
That might be a problem in some cases. The `x-gvfs-notrash` mount option
allows disabling the trash functionality for certain mounts. Let's add
support for the `x-gvfs-trash` mount option to allow the opposite.
See: https://issues.redhat.com/browse/RHEL-46828
We can only use the [class@Foo.Bar] syntax for identifiers under
namespaces included by the current namespace. Naturally, we cannot
include the GDK namespace.
Use a direct link for this instead.
Adjust all docs to use the gi-docgen referencing syntax, reindent
some of the comments, and add missing annotations to some async
methods.
The error arguments are not necessary with gi-docgen so they're
removed.
Confusingly enough, the docks for GAppInfo is spread between two
files.
This fixes commit cdcb179808.
`dn_comp()` is needed to build fake DNS records for most of the tests in
this file. The new ownership test is no exception.
See https://gitlab.gnome.org/GNOME/glib/-/jobs/4058481
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
On Linux the error will be `G_IO_ERROR_CONNECTION_REFUSED`, but on macOS
it will be `G_IO_ERROR_TIMED_OUT`. Both errors seem reasonable to me, so
let’s not specifically require one of them.
See: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/4104#note_2161451
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
This should have been dropped in commit
38faeca62e but somehow that didn’t happen
and somehow it wasn’t caught by the CI until afterwards.
Fixes: https://gitlab.gnome.org/GNOME/glib/-/jobs/4049254
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
For each test expected to return valid DNS records, test that the
record variants are not floating references.
Also add an test which checks this explicitly for a simple TXT record.
The return value to `lookup_records()` methods is set as `transfer full`
but the code path in `g_resolver_records_from_res_query()` doesn't
sink the GVariant.
Add the `g_variant_ref_sink()` call when prepending the record, so
the list hold a full reference on each records.
closes#3393
- Add licensing tags
- Tweak spacing, colors, line thicknesses
- Create light-mode version
- Use `<picture>` tag to include appropriate version for each media
color scheme.
Recreate the `menu-model.png` diagram in SVG, with box outlines and
connectors recolored from black to white. This will allow the diagram
to show up better in the dark documentation theme.
By keeping `expected` as a `double` for longer, we avoid having to cast
when populating the elements of `ordering`, to avoid
`-Wfloat-conversion` warnings.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3405
If we enable `-Wfloat-conversion`, these warn about a possible loss of
precision due to an implicit conversion from `double` to some other
numeric type.
The warning is correct: there is a possible loss of precision here. In
these instances, we don’t care, as the floating point arithmetic is
being done to do some imprecise scaling or imprecise timing. A loss of
precision is not a problem.
So, add an explicit cast to squash the warning.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3405
When the file name is too long (for example, more than 238 bytes on
ext4), this will cause the creation of the .trashinfo file to fail.
Let's shorten the .trashinfo filename in this case, after all the
trash specification only requires unique filenames (see
`Contents of a trash directory` section in
https://specifications.freedesktop.org/trash-spec/trashspec-latest.html).
This should test the limits of loading 4GB files on i386 platforms, such
as the Hurd CI runner. On such platforms, `sizeof(size_t) == 4`.
This should fix the compiler warning from
https://gitlab.gnome.org/GNOME/glib/-/jobs/3989442:
```
../gio/tests/file.c:2931:51: error: left shift count >= width of type [-Werror=shift-count-overflow]
2931 | static const gsize testfile_4gb_size = ((gsize) 1 << 32) + (1 << 16); /* 4GB + a bit */
| ^~
cc1: all warnings being treated as errors
```
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
They take too long to include in a normal test run. They’ll still be run
in CI once a week as part of our scheduled slow test job.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
The tests - one for sync, one for async - create a sparse file for
this purpose, so this should be cheap on the fileystem.
Of course, the test still allocates >4GB of memory for the data that it
returns from g_file_load_contents(), I hope the CI test runners can deal
with that.
GByteArray is limited to 4GB in size and the current code silently
overflows when that happens.
Replace both load_contents() and load_contents_async() implementations
with a version that uses realloc() and gsize to maintain the array.
Disable tests that require update-desktop-database when it is missing.
It requires glib to build so it will be missing when bootstrapping glib.
Refactor the ifdef for Windows and MacOS while at it and reduce number
of ifdefs.
Ref: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3658
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
shared-mime-info required glib to build and will not be there during
bootstrap. Skip the test if it is missing.
ref: https://gitlab.gnome.org/GNOME/glib/-/issues/3317
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Previously it was mapped (as a default) to `G_IO_ERROR_FAILED`.
It’s the error that macOS returns when trying to connect to a socket which
is bound but not listened to. Linux returns `ECONNREFUSED` in this case.
It’s helpful if they both map to the same `GIOError` value.
This should fix the `/socket-client/connection-fail` test on macOS,
which is currently
[failing](https://gitlab.gnome.org/GNOME/glib/-/jobs/3970547) with:
```
# GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt
# GLib-GIO-DEBUG: GSocketClient: Connection attempt failed: Can't assign requested address
# GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration
# GLib-GIO-DEBUG: GSocketClient: Address enumeration completed (out of addresses)
# GLib-GIO-DEBUG: GSocketClient: Address enumeration failed: (null)
# GLib-GIO-DEBUG: GSocketClient: Connection failed: Could not connect to localhost: Can't assign requested address
not ok /socket-client/connection-fail - GLib-GIO:ERROR:../gio/tests/gsocketclient-slow.c:231:test_connection_failed: assertion failed (local_error == (g-io-error-quark, 39)): Could not connect to localhost: Can't assign requested address (g-io-error-quark, 0)
Bail out!
```
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
See: #3184Fixes: #3394
Once the task is completed (and `g_task_return_*()` has been called),
the task is no longer needed. It would make more sense to unref it in
`complete_connection_with_error()`, where `g_task_return_*()` is called,
but that complicates other call sites significantly, so I didn’t do it.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3184
While backporting CVE-2024-34397 fixes I noticed that this comment
claimed that the reference count is immutable after construction, which
is clearly not true. In fact the reference count is the only
mutable field.
Signed-off-by: Simon McVittie <smcv@collabora.com>
To avoid adding a large block of macros to gdbusprivate.h, I've only
added a subset of the well-known error names. I chose to draw the
line by adding constants for the errors emitted via their string names
in GDBusConnection, but not for error names that are only mentioned
in `gdbuserror.c` or in tests.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Most D-Bus interfaces are domain-specific, but these interfaces from the
D-Bus Specification are intended to be commonly used in any context for
which they are found to be appropriate.
Most of these use `gdbusprivate.h`. One exception is that
`gio/tests/gdbus-example-*` redefine the constants locally: due to these
files' dual role as part of the unit tests and as sample code, it seems
desirable to ensure that they can still be compiled outside GLib.
Signed-off-by: Simon McVittie <smcv@collabora.com>
These well-known flags and replies are part of the D-Bus Specification,
and also exist with the same names in libdbus header files.
Moving them into a private header means that unit tests like
gdbus-proxy-threads and gdbus-subscribe don't have to reinvent them.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Unlike the various functions to call D-Bus methods, these sort their
arguments in a non-obvious order (bus name, interface, signal, path),
presumably aiming to sort the most-likely-to-be-used arguments first.
Signed-off-by: Simon McVittie <smcv@collabora.com>
These function arguments are arranged in the obvious order from
conceptually largest to smallest: (bus name, path, interface, method).
Signed-off-by: Simon McVittie <smcv@collabora.com>
This test was subscribing to the NameOwnerChanged signal with an
incorrect object path, so the callback would never be called. In this
particular case it doesn't actually matter, because the callback does
nothing anyway (the purpose of this particular test was to test that
the user-data is freed on unsubscription).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Almost identically to the previous commit, fix a similar latent bug in
`g_dbus_connection_export_action_group()`, which was not ready to handle
the fledgling `GActionGroupExporter` being freed early on an error
handling path.
See the previous commit message for details of the approach.
This includes a unit test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3366
This latent bug wasn’t triggered until commit 3f30ec86c (or its
cherry-pick onto `glib-2-80`, 747e3af99, which was first released in
2.80.1).
That change means that `g_menu_exporter_free()` is now called on the
registration failure path by `g_dbus_connection_register_object()`
before it returns. The caller then tries to call `g_slice_free()` on the
exporter again. The call to `g_menu_exporter_free()` tries to
dereference/free members of the exporter which it expects to be
initialised — but because this is happening in an error handling path,
they are not initialised.
If it were to get any further, the `g_slice_free()` would then be a
double-free on the exporter allocation.
Fix that by making `g_menu_exporter_free()` robust to some of the
exporter members being `NULL`, and moving some of the initialisation
code higher in `g_dbus_connection_export_menu_model()`, and removing the
duplicate free code on the error handling path.
This includes a unit test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3366
gio/glocalfileinfo.c has a struct 'ThumbMD5Context'
that's been unused since
commit d013d46b98 ("Replace the copy-and-paste MD5 digest generation
with GChecksum.")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
It's an array containing the list of sanitizers in use, normally it
contains a value, but in some cases may have more than one (e.g.
'address' and 'undefined').
And so use it to avoid repeated checks
In glocalfile we're allocating some temporary strings but we don't free
them on early returns, so free them once done and unset the variables
to prevent them being used incorrectly.
It looks like that finally also valgrind notices the same leaks as
address sanitizer does. It does it more randomly but it still happens,
so better to inform about until #2309 is resolved.
We're now caching arg0 but such value is not cleared when a new body is
set as it's in the connection filter test cases where we've a leak as
highlighted by both valgrind and leak sanitizer
In a D-Bus-Specification-compliant message bus, the owner of a well-known
name is a unique name. However, ibus has its own small implementation
of a message bus (src/ibusbus.c) in which org.freedesktop.IBus is
special-cased to also have itself as its owner (like org.freedesktop.DBus
on a standard message bus), and connects to that bus with the
G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION flag. The ability to do
this regressed when CVE-2024-34397 was fixed.
Relax the checks to allow the owner of a well-known name to be any valid
D-Bus name, even if it is not syntactically a unique name.
Fixes: 683b14b9 "gdbus: Track name owners for signal subscriptions"
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/3353
Bug-Debian: https://bugs.debian.org/1070730
Bug-Debian: https://bugs.debian.org/1070736
Bug-Debian: https://bugs.debian.org/1070743
Bug-Debian: https://bugs.debian.org/1070745
Signed-off-by: Simon McVittie <smcv@debian.org>
The test case assumes signals will dispatched in a different order than
they're subscribed. In fact, signals can be dispatched in any order,
and are often dispatched in order.
This commit reorders the subscriptions so they're in order, which is
more logical, and also changes the code to only exit the event loops
when there are no pending handlers ready to dispatch.
This was highlighted (but not introduced) by
0144feb41f. Previously the test coverage
didn’t cover this branch, I think.
`iter` was leaked, and at this point `parameter` had never been set, so
clearing it was unnecessary.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3349
GDBusConnection sends each signal to recipients in a separate idle
callback, and there's no particular guarantee about the order in which
they're scheduled or dispatched. For the NameOwnerChanged signal that
reports the name becoming unowned, it's possible that g_bus_watch_name()
gets its idle callback called before the GDBusProxy:g-name-owner
machinery has updated the name owner, in which case the assertion
will fail.
Fixing GNOME/glib#3268 introduced a new subscription to NameOwnerChanged
which can alter the order of delivery, particularly in the case where
G_DBUS_PROXY_FLAGS_NO_MATCH_RULE was used (as tested in
/gdbus/proxy/no-match-rule). The resulting test failure is intermittent,
but reliably appears within 100 repetitions of that test.
Fixes: 511c5f5b "tests: Wait for gdbus-testserver to die when killing it"
Signed-off-by: Simon McVittie <smcv@debian.org>
If the file to be added is on a read-only filesystem, opening read/write
will fail with EROFS. In this case we should fall back to opening it
read-only, the same way we already do if write access is forbidden by
DAC or MAC.
An easy way to reproduce this test failure is to build and test GLib
in a podman container, with its source code read-only and its build
directory read/write:
podman run --rm -it \
-v $(pwd):$(pwd):ro \
-v $(pwd)/_build:$(pwd)/_build:rw \
-w $(pwd) ...
Before this commit, the dbus-appinfo test would fail, because opening
${srcdir}/gio/tests/org.gtk.test.dbusappinfo.flatpak.desktop read/write
would fail with EROFS.
For completeness, give similar handling to the other error codes
documented in Linux open(2) that might succeed if re-attempted using
read-only access: according to that documentation, we could get EPERM
if opening read/write is prevented by fcntl F_ADD_SEALS, or ETXTBSY
if the file is an executable that is currently being run.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This was a bug that existed during development of this branch; make sure
it doesn't come back.
This test fails with a use-after-free and crash if we comment out the
part of name_watcher_unref_watched_name() that removes the name watcher
from `map_method_serial_to_name_watcher`.
It would also fail with an assertion failure if we asserted in
name_watcher_unref_watched_name() that get_name_owner_serial == 0
(i.e. that GetNameOwner is not in-flight at destruction).
Signed-off-by: Simon McVittie <smcv@collabora.com>
The vulnerability reported as GNOME/glib#3268 can be characterized
as: these signals from an attacker should not be delivered to either
the GDBusConnection or the GDBusProxy, but in fact they are (in at
least some scenarios).
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268
Signed-off-by: Simon McVittie <smcv@collabora.com>
The expected result is that because TEST_CONN_SERVICE owns
ALREADY_OWNED_NAME but not (yet) OWNED_LATER_NAME, the signal will be
delivered to the subscriber for the former but not the latter.
Before #3268 was fixed, it was incorrectly delivered to both.
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268 (partially)
Signed-off-by: Simon McVittie <smcv@collabora.com>
Otherwise a malicious connection on a shared bus, especially the system
bus, could trick GDBus clients into processing signals sent by the
malicious connection as though they had come from the real owner of a
well-known service name.
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/3268
Signed-off-by: Simon McVittie <smcv@collabora.com>
We will use this in a subsequent commit to prevent signals from an
impostor from being delivered to a subscriber.
To avoid message reordering leading to misleading situations, this does
not use the existing mechanism for watching bus name ownership, which
delivers the ownership changes to other main-contexts. Instead, it all
happens on the single thread used by the GDBusWorker, so the order in
which messages are received is the order in which they are processed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
If a connection has two signal subscriptions active for the same signal,
one with arg0 matching and one without, a signal which doesn’t contain
an arg0 value (i.e. `g_dbus_message_get_arg0()` returns `NULL`) will
cause `NULL` to be passed to `strcmp()` when checking for a match
against the signal subscription which *has* arg0 matching, causing a
crash.
Fix that by adding the obvious `NULL` check, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3342
D-Bus Activation allows passing an array of parameters. Allow apps to
export actions that accept tuples to match the number of elements in the
parameters so the full potential of the D-Bus interface can be used.
Closes: https://gitlab.gnome.org/GNOME/glib/-/issues/3333
See the code comment. scan-build can’t handle analysis over the
refcounts, so consistently complains about potential use-after-free
errors in the code, essentially because:
* It understands `name_unref()`, but completely ignores `name_ref()`
* The code often calls `name_unref()` on the ‘wrong’ pointer, in the
sense that it knows that if another struct exists, that struct holds
a ref on a `Name`, but without actually having a pointer to the
`Name`. So the code calls `name_unref (name); name_unref (name)`.
That’s valid, but quite understandably looks like a recipe for a
use-after-free.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks that there can be a `NULL` pointer dereference of
`error` here because it doesn’t understand that the function return
value and `GError` are related: when a valid return value is returned,
the error is `NULL` and vice-versa.
Try and make that clearer to the static analyser by checking whether the
error is `NULL`, rather than the return value.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks there could be a `NULL` pointer dereference of
`t->data` here. It’s wrong, so add an assertion to try and help it
understand the control flow.
The loop is exited as soon as a target is found whose weight is greater
than or equal to a random value between 0 and the sum of all the weights
in the set of remaining targets in the loop. By definition, the last
target in the loop always satisfies this condition, so a target will
always be chosen, and hence `t` will never be `NULL` within the loop.
`t->data` will never be `NULL` by construction of the target list.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks that `data` could be leaked. It’s not, though; it’s
passed as the `user_data` to `g_dbus_connection_register_object()` along
with its free function.
Try and persuade scan-build that there’s no leak by annotating the
transfer.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build was complaining that `dest_hostname` and `dest_protocol` were
used after being freed, which could potentially happen if the code is
built with `G_DISABLE_CHECKS`. This is a false positive, because the
state of types in the program should be the same regardless of whether
`G_DISABLE_CHECKS` is used.
However, the code did smell. If we are trying to free things and return
gracefully if the underlying socket address enumerator returns something
of the wrong type, why not free the rest of the function’s state, or
skip the invalid address and move on to the next one? Or if we are trying
to make an assertion, why bother freeing some temporary data at all?
This halfway house doesn’t make sense.
So turn the `g_return_val_if_fail()` into a full assertion.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
After a lot of loop unwinding, during which I think it might have lost
its knowledge that `cache->buffer != NULL` (from a prior check on line
765), scan-build seems to think that there can be a `NULL` pointer
dereference of `cache->buffer` within `cache_magic_compare_to_data()`.
There can’t be. Add an assertion to try and help the analyser.
Upstreamed as
https://gitlab.freedesktop.org/xdg/xdgmime/-/merge_requests/38.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks that it’s possible for `read_netlink_messages()` to
return `FALSE` and an unset error (or `TRUE` and a set error), and this
belief causes it to emit warnings for code which calls
`read_netlink_messages()`.
That’s not possible, but the function is written in such a way that
following the control flow would be hard for a static analyser. It would
have to work out that `retval` and `local_error == NULL` are identical
on all control flow branches.
Avoid the need for such complex analysis by eliminating `retval` and
just using `local_error` throughout.
This introduces no functional changes to the code.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
scan-build thinks that `term_arg` could be used uninitialised. I think
there isn’t a bug here because that use is protected by the
`found_terminal == NULL` check and early return. But perhaps that logic
is a bit too complex for static analysis, so add a default value for the
variable.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
The previous approach was to return a length as a `gssize`, with
negative values indicating failure. That works fine, but causes a lot of
signed/unsigned comparisons or assignments.
Tidy the code up by splitting success from length, returning success as
a boolean, and length as a `size_t*` out argument. This introduces no
functional changes, but does tidy the code up and fix some compiler
integer warnings.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Basically various trivial instances of the following MSVC compiler
warning:
```
../gio/gio-tool-set.c(50): warning C4267: '=': conversion from 'size_t' to 'int', possible loss of data
```
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Looks like the original author mixed up where the link label and the
link URL goes. :p
Previously the link would point to "https://docs.gtk.org/gio/file
attributes", with a space and no file extension.
This will become confusing when we start tracking the owner of a
well-known-name sender, and it's redundant anyway. Instead, track the
1 bit of data that we actually need: whether it's a well-known name.
Strictly speaking this too is redundant, because it's syntactically
derivable from the sender, but only via extra string operations.
A subsequent commit will add a data structure to keep track of the
owner of a well-known-name sender, at which point this boolean will
be replaced by the presence or absence of that data structure.
Signed-off-by: Simon McVittie <smcv@collabora.com>
No functional change, just removing some nesting. The check for whether
signal_data->subscribers is empty changes from a conditional that tests
whether it is into an early-return if it isn't.
A subsequent commit will add additional conditions that make us consider
a SignalData to be still in use and therefore not eligible to be removed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
No functional changes, except that the implicit ownership-transfer
for the rule field becomes explicit (the local variable is set to NULL
afterwards).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Subsequent changes will need to access these data structures from
on_worker_message_received(). No functional change here, only moving
code around.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Using these is a bit more clearly correct than repeating them everywhere.
To avoid excessive diffstat in a branch for a bug fix, I'm not
immediately replacing all existing occurrences of the same literals with
these names.
The names of these constants are chosen to be consistent with libdbus,
despite using somewhat outdated terminology (D-Bus now uses the term
"well-known bus name" for what used to be called a service name,
reserving the word "service" to mean specifically the programs that
have .service files and participate in service activation).
Signed-off-by: Simon McVittie <smcv@collabora.com>
On GNOME/glib#3268 there was some concern about whether this would
allow an attacker to send signals and have them be matched to a
GDBusProxy in this situation, but it seems that was a false alarm.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This somewhat duplicates test_connection_signals(), but is easier to
extend to cover different scenarios.
Each scenario is tested three times: once with lower-level
GDBusConnection APIs, once with the higher-level GDBusProxy (which
cannot implement all of the subscription scenarios, so some message
counts are lower), and once with both (to check that delivery of the
same message to multiple destinations is handled appropriately).
Signed-off-by: Simon McVittie <smcv@collabora.com>
The recently added libmount-based unix mount monitoring may fail when the
device exceeds inotify limits. Let's fallback to the older implementation
in case of the `mnt_monitor_get_fd` function failure. This among others
fixes tracker-miners failures caused by seccomp rules.
Fixes: https://gitlab.gnome.org/GNOME/tracker-miners/-/issues/315
This is a partial revert and rework of commit
c79575362e, for the `gsettings` script
only (the other completion scripts are fine).
I blindly added quoting to everything shellcheck told me to, without
testing it properly.
As it turns out, the `$schemadir` argument to `gsettings` invocations
was deliberately not quoted, so that it would expand to zero arguments
if unset, and two arguments (`--schemadir /some/path`) if set earlier in
the command-being-completed.
Quoting it meant that it expanded to one argument (the empty string) if
unset, which caused the `gsettings` subcommands to fail, and hence any
further tab completion to fail.
Fix that as suggested on https://www.shellcheck.net/wiki/SC2086 by
turning `schemadir` into an array, which either has zero members if
unset, or two members if set.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
The copyright entries come from looking at `git log gio/completion/*`
and, in particular, `git log -- gio/gsettings-bash-completion.sh` (etc.)
as the files were moved after being originally written, and haven’t
really changed since.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1415
As suggested by Ville Skyttä in
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/4012#note_2084405,
make sure to invoke the copy of the command which is being completed
when asking for completions of a given subcommand.
This avoids accidentally invoking any old `gdbus`/`gresource`/etc.
binary which is hanging around in another part of `$PATH`.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
The copyright from `git log gio/inotify/meson.build` is now included in
the file header. The following commits are too trivial to be
copyrightable:
- d10be6102f
- 03e86d000f
- 1741fc2c6e
- 8733d172a3
The file was contributed while the `COPYING` file for GLib was
LGPL-2.1-or-later, so was previously implicitly licensed as that.
Let’s make that explicit.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1415
The license and copyright are already stated in human-readable form in
these files, so this should be uncontroversial.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1415
The `.flake8` file has a trivial version history, so the copyright is
straightforward from that.
`meson.build` has a more complex history, but the only significant
contributions were from Centricular. From `git log
gio/gdbus-2.0/codegen/meson.build`, the other (following) commits are
too trivial to be copyrightable:
- d10be6102f
- 30b25a6fd9
- 95fa229f34
- 631c3534b7
- 00d7568e4f
- 9734e4854e
- 65be80c3ed
- 66e4ba806a
- a1c78d63ef
- a73ca336aa
- 19353017a7
- b4231844a2
- 4cb945d780
- 4ce58df854
- e2433308c4
- 013980d839
Both files were contributed while the `COPYING` file for GLib was
LGPL-2.1-or-later, so both were previously implicitly licensed as that.
Let’s make that explicit.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1415
The license and copyright are already stated in human-readable form in
these files, so this should be uncontroversial.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1415
Using the same justification as in
https://gitlab.gnome.org/GNOME/dconf/-/merge_requests/81#note_2083220:
it’s hard to get this right, with error handling, in a way which is
understandable to people reading it, and which both bash and shellcheck
will be happy with.
On the assumption that none of the completions generated by any of these
utilities will include ‘problematic’ characters (ones which would cause
word splitting or globbing in bash), just ignore the shellcheck
warnings. Note that I have not actually closely verified that these
utilities can’t return ‘problematic’ characters.
This means we can enable shellcheck, with fatal warnings, for these
scripts, and hence catch future regressions.
If someone wants to improve the handling of globbing/word splitting in
some/all of these array assignments in future, the shellcheck disables
can be removed.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
This means that backslashes in the input (which is unlikely, but I guess
possible) won’t affect line splitting. Spotted by shellcheck.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Having them on the same line masks failure of the subcommand generating
the value being assigned. Spotted by shellcheck.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Because completion scripts are not executed directly, they don’t have a
shebang line, so shellcheck can’t be sure which shell syntax to use for
them. Help it out.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
