Skip it on systems which don’t support it, rather than compiling it out.
That gives us more information from test runs about which tests are
being run on which architectures.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When compiling GLib with `-Wsign-conversion`, we get various warnings
about the atomic calls. A lot of these were fixed by
3ad375a629, but some remain. Fix them by
adding appropriate casts at the call sites.
Note that `g_atomic_int_{and,or,xor}()` actually all operate on `guint`s
rather than `gint`s (which is what the rest of the `g_atomic_int_*()`
functions operate on). I can’t find any written reasoning for this, but
assume that it’s because signedness is irrelevant when you’re using an
integer as a bit field. It’s unfortunate that they’re named a
`g_atomic_int_*()` rather than `g_atomic_uint_*()` functions.
Tested by compiling GLib as:
```
CFLAGS=-Wsign-conversion jhbuild make -ac |& grep atomic
```
I’m not going to add `-Wsign-conversion` to the set of default warnings
for building GLib, because it mostly produces false positives throughout
the rest of GLib.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1565
They provide more detailed failure messages, and aren’t compiled out
when building with `G_DISABLE_ASSERT`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Previously, if a method was not annotated with org.gtk.GDBus.C.UnixFD
then the generated code would never contain GUnixFDList parameters, even
if the method has 'h' (file descriptor) parameters. However, in this
case, the generated code is essentially useless: the method cannot be
called or handled except in degenerate cases where the file descriptors
are missing or ignored.
Check the argument types for 'h', and if present, generate code as if
org.gtk.GDBus.C.UnixFD annotation were specified.
This change will break any existing code which refers to the (useless)
wrappers for such methods. The workaround for such code is to add the
org.gtk.GDBus.C.UnixFD annotation, which will cause the same generated
code to be emitted before and after this change.
If this is found to cause widespread problems, we can explore a
different approach (perhaps emitting a warning from the code generator,
or annotating the symbols as deprecated).
https://gitlab.gnome.org/GNOME/glib/issues/1726
Instead of letting each directory to find its way to link with libdl,
it is easier to put the check in the top level, so its result can be
used by all directories.
It is a follow-up of https://gitlab.gnome.org/GNOME/glib/merge_requests/810.
When resetting a key in the delayed settings backend,
g_settings_backend_changed() was not called to notify the backend of
the change.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1309
We're using the `install` argument for configure_file() all over the
place.
The support for an `install` argument for configure_file() was added in
Meson 0.50, but we haven't bumped the minimum version of Meson we
require, yet; which means we're getting compatibility warnings when
using recent versions of Meson, and undefined behaviour when using older
versions.
The configure_file() object defaults to `install: false`, unless an
install directory is used. This means that all instances of an `install`
argument with an explicit `true` or `false` value can be removed,
whereas all instances of `install` with a value determined from a
configuration option must be turned into an explicit conditional.
The plugin modules in these tests get statically linked with a separate
copy of GLib so they end up calling vfuncs in their own copy of GLib.
Fixes#1648
We need to enable building the dirent and gnulib sources for clang-cl,
as we are still using the Microsoft-style headers and lib's and CRT.
We need to also do this for the following, for similar reasoning:
-Symbol export (via __declspec(dllexport))
-Dependency discovery without pkg-config files
-long long and ssize_t detection
We do, however, enable the autoptr tests for clang-cl builds. Note that
at this point real MSVC builds are still better supported than clang-cl
builds, and it will likely remain so for at least the near future,
alhtough real MSVC builds of the GTK stack are consumable and are usable
by clang-cl.
Now that we're not calling g_object_run_dispose() indirectly in
g_test_dbus_down() (see commit "Revert "gtestdbus: Properly close server
connections""), the test gdbus-connection-loss is failing with the
message "Bail out! GLib-GIO-FATAL-WARNING: Weak notify timeout, object
ref_count=1". This is because we're holding a reference to the singleton
connection object while calling session_bus_down() in the test's main().
So then we end up waiting for 30 seconds in
_g_object_unref_and_wait_weak_notify() for the GWeakNotify to be
triggered, which never happens.
The fix is to unref the connection before calling session_bus_down().
This is consistent with how other tests work, and is safe because the
only method called on the connection has already errored out, as
asserted by the test.
This reverts commit c37cd19fee.
Now that we've reverted the commit "gtestdbus: Properly close server
connections", g_test_dbus_down() no longer returns early and we no
longer need this workaround. Since the gdbus-names test seems to
properly unref its GDBusConnection objects it's not clear to me why it
needed the sleep to succeed. However even at the time the failure wasn't
reproducible according to this comment[1] so it's probably not worth
spending more effort trying to reproduce it now.
[1] https://gitlab.gnome.org/GNOME/glib/issues/787#note_214235
There seems to be no reason to do so, and since the `appinfo` test was
ported to use `G_TEST_OPTION_ISOLATE_DIRS`, it has been causing
coredumps to accumulate. `gnome-terminal` was chosen as the terminal,
but it couldn’t find its GSettings schemas due to all the XDG
environment variables being cleared to `/dev/null` by
`G_TEST_OPTION_ISOLATE_DIRS`.
In order to keep using `gnome-terminal` as a subprocess in the tests,
we’d need to explicitly set up its environment so it can load the right
GSettings schemas. That’s a lot of work for not much gain.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #436
On Visual Studio, Meson builds modules as xxxx.dll, not libxxxx.dll when
xxxx is specified as the name for the shared_module() build directive.
This means that in the test programs if we expect for libxxxx for the
module name, the test will fail as there is no libxxxx.dll but there is
xxxx.dll. This makes the test program look for the module files
correctly.
This ensures that D-Bus connections established with unix:dir and
unix:path addresses actually work properly. Previously, we only tested
unix:tmpdir and TCP addresses.
unix:dir= addresses are exactly the same as unix:tmpdir= addresses,
already supported by GDBus, except they forbid use of abstract sockets.
This is convenient for situations where abstract sockets are
impermissible, such as when a D-Bus client inside a network namespace
needs to connect to a server running in a different network namespace.
An abstract socket cannot be shared between two processes in different
network namespaces.
Applications could use unix:path= addresses instead, so this is only a
convenience, but there's no good reason not to support unix:dir=.
Currently it is not supported simply because unix:dir= is a relatively
recent addition to the D-Bus spec.
It's somewhat unrealistic to use a GDBusServer without a
GDBusAuthObserver, because most D-Bus servers want to be like the
standard session bus (the owning user can connect) rather than being
like the standard system bus (all users can connect, the server is a
security boundary, and many bugs are security vulnerabilities).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Previously, its tests were being run in the build directory, which is
fine (it should always be writable). If multiple tests were run in
parallel, for example with Meson’s `--repeat` option, their test files
would collide.
Fix that by running each test instance in a separate subdirectory of
`/tmp`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1634
Add a case for when the IPv6 result comes back negative and the IPv4
result is significantly delayed. This is exactly the case that causes
the bug addressed by GNOME/glib!865
It should produce a generic result, but not crash. It was previously
crashing on macOS.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1729
g_assert_*() give more helpful error messages on failure, and aren’t
compiled out by G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This was introduced in commit 7846d6154a: g_subprocess_get_identifier()
will return NULL after the subprocess has exited, and the subprocess in
the `noop` test will exit as soon as it has started spawning. So if the
scheduler scheduled the testprog subprocess quickly, descheduled the
parent test process until the testprog exited, then the return value
from g_subprocess_get_identifier() would be NULL.
Move the g_subprocess_get_identifier() test to one which calls testprog
in `sleep-forever` mode, since that is guaranteed not to exit until
killed (which we do later in the test).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The parent GNetworkAddress contains a shared list of resolved
addresses that is used as a cache for multiple enumerations.
This commit ensures that the cache is only set upon completion of
DNS lookups and only read once by enumerations to avoid being in a
bad state.
Fixes#1771
